* [PATCH] drm/exynos/decon5433: configure sysreg in case of hardware trigger [not found] <CGME20161228103032eucas1p29ea330729658adef9a933063f4ed96fc@eucas1p2.samsung.com> @ 2016-12-28 10:30 ` Andrzej Hajda 2016-12-28 14:42 ` Ilia Mirkin 0 siblings, 1 reply; 8+ messages in thread From: Andrzej Hajda @ 2016-12-28 10:30 UTC (permalink / raw) To: Inki Dae, dri-devel; +Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz In case of HW trigger mode, sysreg register should be configured to enable TE functionality. The patch refactors also trigger setup function. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> --- drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 40 +++++++++++++++++++++------ 1 file changed, 32 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c index 6ca1f31..1bef2ec 100644 --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c @@ -13,9 +13,11 @@ #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/component.h> +#include <linux/mfd/syscon.h> #include <linux/of_device.h> #include <linux/of_gpio.h> #include <linux/pm_runtime.h> +#include <linux/regmap.h> #include <video/exynos5433_decon.h> @@ -25,6 +27,9 @@ #include "exynos_drm_plane.h" #include "exynos_drm_iommu.h" +#define DSD_CFG_MUX 0x1004 +#define DSD_CFG_MUX_TE_UNMASK_GLOBAL BIT(13) + #define WINDOWS_NR 3 #define MIN_FB_WIDTH_FOR_16WORD_BURST 128 @@ -56,6 +61,7 @@ struct decon_context { struct exynos_drm_plane planes[WINDOWS_NR]; struct exynos_drm_plane_config configs[WINDOWS_NR]; void __iomem *addr; + struct regmap *sysreg; struct clk *clks[ARRAY_SIZE(decon_clks_name)]; int pipe; unsigned long flags; @@ -117,12 +123,22 @@ static void decon_disable_vblank(struct exynos_drm_crtc *crtc) static void decon_setup_trigger(struct decon_context *ctx) { - u32 val = !(ctx->out_type & I80_HW_TRG) - ? TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | - TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN - : TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | - TRIGCON_HWTRIGMASK | TRIGCON_HWTRIGEN; - writel(val, ctx->addr + DECON_TRIGCON); + if (!(ctx->out_type & (IFTYPE_I80 | I80_HW_TRG))) + return; + + if (!(ctx->out_type & I80_HW_TRG)) { + writel(TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN + | TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN, + ctx->addr + DECON_TRIGCON); + return; + } + + writel(TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | TRIGCON_HWTRIGMASK + | TRIGCON_HWTRIGEN, ctx->addr + DECON_TRIGCON); + + if (regmap_update_bits(ctx->sysreg, DSD_CFG_MUX, + DSD_CFG_MUX_TE_UNMASK_GLOBAL, ~0)) + DRM_ERROR("Cannot update sysreg.\n"); } static void decon_commit(struct exynos_drm_crtc *crtc) @@ -147,8 +163,7 @@ static void decon_commit(struct exynos_drm_crtc *crtc) val = CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F; writel(val, ctx->addr + DECON_CMU); - if (ctx->out_type & (IFTYPE_I80 | I80_HW_TRG)) - decon_setup_trigger(ctx); + decon_setup_trigger(ctx); /* lcd on and use command if */ val = VIDOUT_LCD_ON; @@ -640,6 +655,15 @@ static int exynos5433_decon_probe(struct platform_device *pdev) ctx->out_type |= IFTYPE_I80; } + if (ctx->out_type | I80_HW_TRG) { + ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,disp-sysreg"); + if (IS_ERR(ctx->sysreg)) { + dev_err(dev, "failed to get system register\n"); + return PTR_ERR(ctx->sysreg); + } + } + for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) { struct clk *clk; -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/exynos/decon5433: configure sysreg in case of hardware trigger 2016-12-28 10:30 ` [PATCH] drm/exynos/decon5433: configure sysreg in case of hardware trigger Andrzej Hajda @ 2016-12-28 14:42 ` Ilia Mirkin [not found] ` <CGME20170102083922eucas1p1d327e428675b67876e8f3462f0bcf170@eucas1p1.samsung.com> 0 siblings, 1 reply; 8+ messages in thread From: Ilia Mirkin @ 2016-12-28 14:42 UTC (permalink / raw) To: Andrzej Hajda; +Cc: Bartlomiej Zolnierkiewicz, dri-devel, Marek Szyprowski On Wed, Dec 28, 2016 at 5:30 AM, Andrzej Hajda <a.hajda@samsung.com> wrote: > In case of HW trigger mode, sysreg register should be configured to > enable TE functionality. The patch refactors also trigger setup function. > > Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> > --- > drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 40 +++++++++++++++++++++------ > 1 file changed, 32 insertions(+), 8 deletions(-) > > diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c > index 6ca1f31..1bef2ec 100644 > --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c > +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c > @@ -13,9 +13,11 @@ > #include <linux/platform_device.h> > #include <linux/clk.h> > #include <linux/component.h> > +#include <linux/mfd/syscon.h> > #include <linux/of_device.h> > #include <linux/of_gpio.h> > #include <linux/pm_runtime.h> > +#include <linux/regmap.h> > > #include <video/exynos5433_decon.h> > > @@ -25,6 +27,9 @@ > #include "exynos_drm_plane.h" > #include "exynos_drm_iommu.h" > > +#define DSD_CFG_MUX 0x1004 > +#define DSD_CFG_MUX_TE_UNMASK_GLOBAL BIT(13) > + > #define WINDOWS_NR 3 > #define MIN_FB_WIDTH_FOR_16WORD_BURST 128 > > @@ -56,6 +61,7 @@ struct decon_context { > struct exynos_drm_plane planes[WINDOWS_NR]; > struct exynos_drm_plane_config configs[WINDOWS_NR]; > void __iomem *addr; > + struct regmap *sysreg; > struct clk *clks[ARRAY_SIZE(decon_clks_name)]; > int pipe; > unsigned long flags; > @@ -117,12 +123,22 @@ static void decon_disable_vblank(struct exynos_drm_crtc *crtc) > > static void decon_setup_trigger(struct decon_context *ctx) > { > - u32 val = !(ctx->out_type & I80_HW_TRG) > - ? TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | > - TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN > - : TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | > - TRIGCON_HWTRIGMASK | TRIGCON_HWTRIGEN; > - writel(val, ctx->addr + DECON_TRIGCON); > + if (!(ctx->out_type & (IFTYPE_I80 | I80_HW_TRG))) > + return; > + > + if (!(ctx->out_type & I80_HW_TRG)) { > + writel(TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN > + | TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN, > + ctx->addr + DECON_TRIGCON); > + return; > + } > + > + writel(TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | TRIGCON_HWTRIGMASK > + | TRIGCON_HWTRIGEN, ctx->addr + DECON_TRIGCON); > + > + if (regmap_update_bits(ctx->sysreg, DSD_CFG_MUX, > + DSD_CFG_MUX_TE_UNMASK_GLOBAL, ~0)) > + DRM_ERROR("Cannot update sysreg.\n"); > } > > static void decon_commit(struct exynos_drm_crtc *crtc) > @@ -147,8 +163,7 @@ static void decon_commit(struct exynos_drm_crtc *crtc) > val = CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F; > writel(val, ctx->addr + DECON_CMU); > > - if (ctx->out_type & (IFTYPE_I80 | I80_HW_TRG)) > - decon_setup_trigger(ctx); > + decon_setup_trigger(ctx); > > /* lcd on and use command if */ > val = VIDOUT_LCD_ON; > @@ -640,6 +655,15 @@ static int exynos5433_decon_probe(struct platform_device *pdev) > ctx->out_type |= IFTYPE_I80; > } > > + if (ctx->out_type | I80_HW_TRG) { Did you mean & here? > + ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node, > + "samsung,disp-sysreg"); > + if (IS_ERR(ctx->sysreg)) { > + dev_err(dev, "failed to get system register\n"); > + return PTR_ERR(ctx->sysreg); > + } > + } > + > for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) { > struct clk *clk; > > -- > 2.7.4 > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <CGME20170102083922eucas1p1d327e428675b67876e8f3462f0bcf170@eucas1p1.samsung.com>]
* [PATCH] drm/exynos/decon5433: configure sysreg in case of hardware trigger [not found] ` <CGME20170102083922eucas1p1d327e428675b67876e8f3462f0bcf170@eucas1p1.samsung.com> @ 2017-01-02 8:39 ` Andrzej Hajda 2017-01-05 10:05 ` Inki Dae 0 siblings, 1 reply; 8+ messages in thread From: Andrzej Hajda @ 2017-01-02 8:39 UTC (permalink / raw) To: Inki Dae, dri-devel; +Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz In case of HW trigger mode, sysreg register should be configured to enable TE functionality. The patch refactors also trigger setup function. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> --- v2: fixed bitop operator (thanks Ilia) --- drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 40 +++++++++++++++++++++------ 1 file changed, 32 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c index 6ca1f31..b63b8e6 100644 --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c @@ -13,9 +13,11 @@ #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/component.h> +#include <linux/mfd/syscon.h> #include <linux/of_device.h> #include <linux/of_gpio.h> #include <linux/pm_runtime.h> +#include <linux/regmap.h> #include <video/exynos5433_decon.h> @@ -25,6 +27,9 @@ #include "exynos_drm_plane.h" #include "exynos_drm_iommu.h" +#define DSD_CFG_MUX 0x1004 +#define DSD_CFG_MUX_TE_UNMASK_GLOBAL BIT(13) + #define WINDOWS_NR 3 #define MIN_FB_WIDTH_FOR_16WORD_BURST 128 @@ -56,6 +61,7 @@ struct decon_context { struct exynos_drm_plane planes[WINDOWS_NR]; struct exynos_drm_plane_config configs[WINDOWS_NR]; void __iomem *addr; + struct regmap *sysreg; struct clk *clks[ARRAY_SIZE(decon_clks_name)]; int pipe; unsigned long flags; @@ -117,12 +123,22 @@ static void decon_disable_vblank(struct exynos_drm_crtc *crtc) static void decon_setup_trigger(struct decon_context *ctx) { - u32 val = !(ctx->out_type & I80_HW_TRG) - ? TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | - TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN - : TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | - TRIGCON_HWTRIGMASK | TRIGCON_HWTRIGEN; - writel(val, ctx->addr + DECON_TRIGCON); + if (!(ctx->out_type & (IFTYPE_I80 | I80_HW_TRG))) + return; + + if (!(ctx->out_type & I80_HW_TRG)) { + writel(TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN + | TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN, + ctx->addr + DECON_TRIGCON); + return; + } + + writel(TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | TRIGCON_HWTRIGMASK + | TRIGCON_HWTRIGEN, ctx->addr + DECON_TRIGCON); + + if (regmap_update_bits(ctx->sysreg, DSD_CFG_MUX, + DSD_CFG_MUX_TE_UNMASK_GLOBAL, ~0)) + DRM_ERROR("Cannot update sysreg.\n"); } static void decon_commit(struct exynos_drm_crtc *crtc) @@ -147,8 +163,7 @@ static void decon_commit(struct exynos_drm_crtc *crtc) val = CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F; writel(val, ctx->addr + DECON_CMU); - if (ctx->out_type & (IFTYPE_I80 | I80_HW_TRG)) - decon_setup_trigger(ctx); + decon_setup_trigger(ctx); /* lcd on and use command if */ val = VIDOUT_LCD_ON; @@ -640,6 +655,15 @@ static int exynos5433_decon_probe(struct platform_device *pdev) ctx->out_type |= IFTYPE_I80; } + if (ctx->out_type & I80_HW_TRG) { + ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,disp-sysreg"); + if (IS_ERR(ctx->sysreg)) { + dev_err(dev, "failed to get system register\n"); + return PTR_ERR(ctx->sysreg); + } + } + for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) { struct clk *clk; -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/exynos/decon5433: configure sysreg in case of hardware trigger 2017-01-02 8:39 ` Andrzej Hajda @ 2017-01-05 10:05 ` Inki Dae 2017-01-05 10:15 ` Andrzej Hajda 0 siblings, 1 reply; 8+ messages in thread From: Inki Dae @ 2017-01-05 10:05 UTC (permalink / raw) To: Andrzej Hajda, dri-devel; +Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz 2017년 01월 02일 17:39에 Andrzej Hajda 이(가) 쓴 글: > In case of HW trigger mode, sysreg register should be configured to > enable TE functionality. The patch refactors also trigger setup function. > > Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> > --- > v2: fixed bitop operator (thanks Ilia) > --- > drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 40 +++++++++++++++++++++------ > 1 file changed, 32 insertions(+), 8 deletions(-) > > diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c > index 6ca1f31..b63b8e6 100644 > --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c > +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c > @@ -13,9 +13,11 @@ > #include <linux/platform_device.h> > #include <linux/clk.h> > #include <linux/component.h> > +#include <linux/mfd/syscon.h> > #include <linux/of_device.h> > #include <linux/of_gpio.h> > #include <linux/pm_runtime.h> > +#include <linux/regmap.h> > > #include <video/exynos5433_decon.h> > > @@ -25,6 +27,9 @@ > #include "exynos_drm_plane.h" > #include "exynos_drm_iommu.h" > > +#define DSD_CFG_MUX 0x1004 > +#define DSD_CFG_MUX_TE_UNMASK_GLOBAL BIT(13) > + > #define WINDOWS_NR 3 > #define MIN_FB_WIDTH_FOR_16WORD_BURST 128 > > @@ -56,6 +61,7 @@ struct decon_context { > struct exynos_drm_plane planes[WINDOWS_NR]; > struct exynos_drm_plane_config configs[WINDOWS_NR]; > void __iomem *addr; > + struct regmap *sysreg; > struct clk *clks[ARRAY_SIZE(decon_clks_name)]; > int pipe; > unsigned long flags; > @@ -117,12 +123,22 @@ static void decon_disable_vblank(struct exynos_drm_crtc *crtc) > > static void decon_setup_trigger(struct decon_context *ctx) > { > - u32 val = !(ctx->out_type & I80_HW_TRG) > - ? TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | > - TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN > - : TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | > - TRIGCON_HWTRIGMASK | TRIGCON_HWTRIGEN; > - writel(val, ctx->addr + DECON_TRIGCON); > + if (!(ctx->out_type & (IFTYPE_I80 | I80_HW_TRG))) > + return; > + > + if (!(ctx->out_type & I80_HW_TRG)) { > + writel(TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN > + | TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN, > + ctx->addr + DECON_TRIGCON); > + return; > + } > + > + writel(TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | TRIGCON_HWTRIGMASK > + | TRIGCON_HWTRIGEN, ctx->addr + DECON_TRIGCON); > + > + if (regmap_update_bits(ctx->sysreg, DSD_CFG_MUX, > + DSD_CFG_MUX_TE_UNMASK_GLOBAL, ~0)) > + DRM_ERROR("Cannot update sysreg.\n"); > } > > static void decon_commit(struct exynos_drm_crtc *crtc) > @@ -147,8 +163,7 @@ static void decon_commit(struct exynos_drm_crtc *crtc) > val = CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F; > writel(val, ctx->addr + DECON_CMU); > > - if (ctx->out_type & (IFTYPE_I80 | I80_HW_TRG)) > - decon_setup_trigger(ctx); > + decon_setup_trigger(ctx); Calling this function in video mode is unnecessary. Why did you remove above condition? > > /* lcd on and use command if */ > val = VIDOUT_LCD_ON; > @@ -640,6 +655,15 @@ static int exynos5433_decon_probe(struct platform_device *pdev) > ctx->out_type |= IFTYPE_I80; > } > > + if (ctx->out_type & I80_HW_TRG) { > + ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node, > + "samsung,disp-sysreg"); > + if (IS_ERR(ctx->sysreg)) { > + dev_err(dev, "failed to get system register\n"); > + return PTR_ERR(ctx->sysreg); > + } > + } > + > for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) { > struct clk *clk; > > _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/exynos/decon5433: configure sysreg in case of hardware trigger 2017-01-05 10:05 ` Inki Dae @ 2017-01-05 10:15 ` Andrzej Hajda 2017-01-05 10:19 ` Inki Dae 0 siblings, 1 reply; 8+ messages in thread From: Andrzej Hajda @ 2017-01-05 10:15 UTC (permalink / raw) To: Inki Dae, dri-devel; +Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz On 05.01.2017 11:05, Inki Dae wrote: > > 2017년 01월 02일 17:39에 Andrzej Hajda 이(가) 쓴 글: >> In case of HW trigger mode, sysreg register should be configured to >> enable TE functionality. The patch refactors also trigger setup function. >> >> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> >> --- >> v2: fixed bitop operator (thanks Ilia) >> --- >> drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 40 +++++++++++++++++++++------ >> 1 file changed, 32 insertions(+), 8 deletions(-) >> >> diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c >> index 6ca1f31..b63b8e6 100644 >> --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c >> +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c >> @@ -13,9 +13,11 @@ >> #include <linux/platform_device.h> >> #include <linux/clk.h> >> #include <linux/component.h> >> +#include <linux/mfd/syscon.h> >> #include <linux/of_device.h> >> #include <linux/of_gpio.h> >> #include <linux/pm_runtime.h> >> +#include <linux/regmap.h> >> >> #include <video/exynos5433_decon.h> >> >> @@ -25,6 +27,9 @@ >> #include "exynos_drm_plane.h" >> #include "exynos_drm_iommu.h" >> >> +#define DSD_CFG_MUX 0x1004 >> +#define DSD_CFG_MUX_TE_UNMASK_GLOBAL BIT(13) >> + >> #define WINDOWS_NR 3 >> #define MIN_FB_WIDTH_FOR_16WORD_BURST 128 >> >> @@ -56,6 +61,7 @@ struct decon_context { >> struct exynos_drm_plane planes[WINDOWS_NR]; >> struct exynos_drm_plane_config configs[WINDOWS_NR]; >> void __iomem *addr; >> + struct regmap *sysreg; >> struct clk *clks[ARRAY_SIZE(decon_clks_name)]; >> int pipe; >> unsigned long flags; >> @@ -117,12 +123,22 @@ static void decon_disable_vblank(struct exynos_drm_crtc *crtc) >> >> static void decon_setup_trigger(struct decon_context *ctx) >> { >> - u32 val = !(ctx->out_type & I80_HW_TRG) >> - ? TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | >> - TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN >> - : TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | >> - TRIGCON_HWTRIGMASK | TRIGCON_HWTRIGEN; >> - writel(val, ctx->addr + DECON_TRIGCON); >> + if (!(ctx->out_type & (IFTYPE_I80 | I80_HW_TRG))) >> + return; >> + >> + if (!(ctx->out_type & I80_HW_TRG)) { >> + writel(TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN >> + | TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN, >> + ctx->addr + DECON_TRIGCON); >> + return; >> + } >> + >> + writel(TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | TRIGCON_HWTRIGMASK >> + | TRIGCON_HWTRIGEN, ctx->addr + DECON_TRIGCON); >> + >> + if (regmap_update_bits(ctx->sysreg, DSD_CFG_MUX, >> + DSD_CFG_MUX_TE_UNMASK_GLOBAL, ~0)) >> + DRM_ERROR("Cannot update sysreg.\n"); >> } >> >> static void decon_commit(struct exynos_drm_crtc *crtc) >> @@ -147,8 +163,7 @@ static void decon_commit(struct exynos_drm_crtc *crtc) >> val = CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F; >> writel(val, ctx->addr + DECON_CMU); >> >> - if (ctx->out_type & (IFTYPE_I80 | I80_HW_TRG)) >> - decon_setup_trigger(ctx); >> + decon_setup_trigger(ctx); > Calling this function in video mode is unnecessary. Why did you remove above condition? I have moved the condition to decon_setup_trigger. Regards Andrzej > >> >> /* lcd on and use command if */ >> val = VIDOUT_LCD_ON; >> @@ -640,6 +655,15 @@ static int exynos5433_decon_probe(struct platform_device *pdev) >> ctx->out_type |= IFTYPE_I80; >> } >> >> + if (ctx->out_type & I80_HW_TRG) { >> + ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node, >> + "samsung,disp-sysreg"); >> + if (IS_ERR(ctx->sysreg)) { >> + dev_err(dev, "failed to get system register\n"); >> + return PTR_ERR(ctx->sysreg); >> + } >> + } >> + >> for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) { >> struct clk *clk; >> >> > _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/exynos/decon5433: configure sysreg in case of hardware trigger 2017-01-05 10:15 ` Andrzej Hajda @ 2017-01-05 10:19 ` Inki Dae 2017-01-05 10:35 ` Andrzej Hajda 0 siblings, 1 reply; 8+ messages in thread From: Inki Dae @ 2017-01-05 10:19 UTC (permalink / raw) To: Andrzej Hajda, dri-devel; +Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz 2017년 01월 05일 19:15에 Andrzej Hajda 이(가) 쓴 글: > On 05.01.2017 11:05, Inki Dae wrote: >> >> 2017년 01월 02일 17:39에 Andrzej Hajda 이(가) 쓴 글: >>> In case of HW trigger mode, sysreg register should be configured to >>> enable TE functionality. The patch refactors also trigger setup function. >>> >>> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> >>> --- >>> v2: fixed bitop operator (thanks Ilia) >>> --- >>> drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 40 +++++++++++++++++++++------ >>> 1 file changed, 32 insertions(+), 8 deletions(-) >>> >>> diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c >>> index 6ca1f31..b63b8e6 100644 >>> --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c >>> +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c >>> @@ -13,9 +13,11 @@ >>> #include <linux/platform_device.h> >>> #include <linux/clk.h> >>> #include <linux/component.h> >>> +#include <linux/mfd/syscon.h> >>> #include <linux/of_device.h> >>> #include <linux/of_gpio.h> >>> #include <linux/pm_runtime.h> >>> +#include <linux/regmap.h> >>> >>> #include <video/exynos5433_decon.h> >>> >>> @@ -25,6 +27,9 @@ >>> #include "exynos_drm_plane.h" >>> #include "exynos_drm_iommu.h" >>> >>> +#define DSD_CFG_MUX 0x1004 >>> +#define DSD_CFG_MUX_TE_UNMASK_GLOBAL BIT(13) >>> + >>> #define WINDOWS_NR 3 >>> #define MIN_FB_WIDTH_FOR_16WORD_BURST 128 >>> >>> @@ -56,6 +61,7 @@ struct decon_context { >>> struct exynos_drm_plane planes[WINDOWS_NR]; >>> struct exynos_drm_plane_config configs[WINDOWS_NR]; >>> void __iomem *addr; >>> + struct regmap *sysreg; >>> struct clk *clks[ARRAY_SIZE(decon_clks_name)]; >>> int pipe; >>> unsigned long flags; >>> @@ -117,12 +123,22 @@ static void decon_disable_vblank(struct exynos_drm_crtc *crtc) >>> >>> static void decon_setup_trigger(struct decon_context *ctx) >>> { >>> - u32 val = !(ctx->out_type & I80_HW_TRG) >>> - ? TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | >>> - TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN >>> - : TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | >>> - TRIGCON_HWTRIGMASK | TRIGCON_HWTRIGEN; >>> - writel(val, ctx->addr + DECON_TRIGCON); >>> + if (!(ctx->out_type & (IFTYPE_I80 | I80_HW_TRG))) >>> + return; >>> + >>> + if (!(ctx->out_type & I80_HW_TRG)) { >>> + writel(TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN >>> + | TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN, >>> + ctx->addr + DECON_TRIGCON); >>> + return; >>> + } >>> + >>> + writel(TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | TRIGCON_HWTRIGMASK >>> + | TRIGCON_HWTRIGEN, ctx->addr + DECON_TRIGCON); >>> + >>> + if (regmap_update_bits(ctx->sysreg, DSD_CFG_MUX, >>> + DSD_CFG_MUX_TE_UNMASK_GLOBAL, ~0)) >>> + DRM_ERROR("Cannot update sysreg.\n"); >>> } >>> >>> static void decon_commit(struct exynos_drm_crtc *crtc) >>> @@ -147,8 +163,7 @@ static void decon_commit(struct exynos_drm_crtc *crtc) >>> val = CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F; >>> writel(val, ctx->addr + DECON_CMU); >>> >>> - if (ctx->out_type & (IFTYPE_I80 | I80_HW_TRG)) >>> - decon_setup_trigger(ctx); >>> + decon_setup_trigger(ctx); >> Calling this function in video mode is unnecessary. Why did you remove above condition? > > I have moved the condition to decon_setup_trigger. In video mode, it doesn't need to even call decon_setup_trigger function even though this function is just returned. This is really trivial but it'd better not to call this function so seems no reason to modify. > > Regards > Andrzej > >> >>> >>> /* lcd on and use command if */ >>> val = VIDOUT_LCD_ON; >>> @@ -640,6 +655,15 @@ static int exynos5433_decon_probe(struct platform_device *pdev) >>> ctx->out_type |= IFTYPE_I80; >>> } >>> >>> + if (ctx->out_type & I80_HW_TRG) { >>> + ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node, >>> + "samsung,disp-sysreg"); >>> + if (IS_ERR(ctx->sysreg)) { >>> + dev_err(dev, "failed to get system register\n"); >>> + return PTR_ERR(ctx->sysreg); >>> + } >>> + } >>> + >>> for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) { >>> struct clk *clk; >>> >>> >> > > > _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/exynos/decon5433: configure sysreg in case of hardware trigger 2017-01-05 10:19 ` Inki Dae @ 2017-01-05 10:35 ` Andrzej Hajda 2017-01-05 10:49 ` Inki Dae 0 siblings, 1 reply; 8+ messages in thread From: Andrzej Hajda @ 2017-01-05 10:35 UTC (permalink / raw) To: Inki Dae, dri-devel; +Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz On 05.01.2017 11:19, Inki Dae wrote: > > 2017년 01월 05일 19:15에 Andrzej Hajda 이(가) 쓴 글: >> On 05.01.2017 11:05, Inki Dae wrote: >>> 2017년 01월 02일 17:39에 Andrzej Hajda 이(가) 쓴 글: >>>> In case of HW trigger mode, sysreg register should be configured to >>>> enable TE functionality. The patch refactors also trigger setup function. >>>> >>>> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> >>>> --- >>>> v2: fixed bitop operator (thanks Ilia) >>>> --- >>>> drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 40 +++++++++++++++++++++------ >>>> 1 file changed, 32 insertions(+), 8 deletions(-) >>>> >>>> diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c >>>> index 6ca1f31..b63b8e6 100644 >>>> --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c >>>> +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c >>>> @@ -13,9 +13,11 @@ >>>> #include <linux/platform_device.h> >>>> #include <linux/clk.h> >>>> #include <linux/component.h> >>>> +#include <linux/mfd/syscon.h> >>>> #include <linux/of_device.h> >>>> #include <linux/of_gpio.h> >>>> #include <linux/pm_runtime.h> >>>> +#include <linux/regmap.h> >>>> >>>> #include <video/exynos5433_decon.h> >>>> >>>> @@ -25,6 +27,9 @@ >>>> #include "exynos_drm_plane.h" >>>> #include "exynos_drm_iommu.h" >>>> >>>> +#define DSD_CFG_MUX 0x1004 >>>> +#define DSD_CFG_MUX_TE_UNMASK_GLOBAL BIT(13) >>>> + >>>> #define WINDOWS_NR 3 >>>> #define MIN_FB_WIDTH_FOR_16WORD_BURST 128 >>>> >>>> @@ -56,6 +61,7 @@ struct decon_context { >>>> struct exynos_drm_plane planes[WINDOWS_NR]; >>>> struct exynos_drm_plane_config configs[WINDOWS_NR]; >>>> void __iomem *addr; >>>> + struct regmap *sysreg; >>>> struct clk *clks[ARRAY_SIZE(decon_clks_name)]; >>>> int pipe; >>>> unsigned long flags; >>>> @@ -117,12 +123,22 @@ static void decon_disable_vblank(struct exynos_drm_crtc *crtc) >>>> >>>> static void decon_setup_trigger(struct decon_context *ctx) >>>> { >>>> - u32 val = !(ctx->out_type & I80_HW_TRG) >>>> - ? TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | >>>> - TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN >>>> - : TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | >>>> - TRIGCON_HWTRIGMASK | TRIGCON_HWTRIGEN; >>>> - writel(val, ctx->addr + DECON_TRIGCON); >>>> + if (!(ctx->out_type & (IFTYPE_I80 | I80_HW_TRG))) >>>> + return; >>>> + >>>> + if (!(ctx->out_type & I80_HW_TRG)) { >>>> + writel(TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN >>>> + | TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN, >>>> + ctx->addr + DECON_TRIGCON); >>>> + return; >>>> + } >>>> + >>>> + writel(TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | TRIGCON_HWTRIGMASK >>>> + | TRIGCON_HWTRIGEN, ctx->addr + DECON_TRIGCON); >>>> + >>>> + if (regmap_update_bits(ctx->sysreg, DSD_CFG_MUX, >>>> + DSD_CFG_MUX_TE_UNMASK_GLOBAL, ~0)) >>>> + DRM_ERROR("Cannot update sysreg.\n"); >>>> } >>>> >>>> static void decon_commit(struct exynos_drm_crtc *crtc) >>>> @@ -147,8 +163,7 @@ static void decon_commit(struct exynos_drm_crtc *crtc) >>>> val = CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F; >>>> writel(val, ctx->addr + DECON_CMU); >>>> >>>> - if (ctx->out_type & (IFTYPE_I80 | I80_HW_TRG)) >>>> - decon_setup_trigger(ctx); >>>> + decon_setup_trigger(ctx); >>> Calling this function in video mode is unnecessary. Why did you remove above condition? >> I have moved the condition to decon_setup_trigger. > In video mode, it doesn't need to even call decon_setup_trigger function even though this function is just returned. > This is really trivial but it'd better not to call this function so seems no reason to modify. The function is inlined anyway so it does not matter from efficiency point of view. The good point in this change is that it puts trigger related code into one function making decon_commit little bit less messy. Regards Andrzej > >> Regards >> Andrzej >> >>>> >>>> /* lcd on and use command if */ >>>> val = VIDOUT_LCD_ON; >>>> @@ -640,6 +655,15 @@ static int exynos5433_decon_probe(struct platform_device *pdev) >>>> ctx->out_type |= IFTYPE_I80; >>>> } >>>> >>>> + if (ctx->out_type & I80_HW_TRG) { >>>> + ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node, >>>> + "samsung,disp-sysreg"); >>>> + if (IS_ERR(ctx->sysreg)) { >>>> + dev_err(dev, "failed to get system register\n"); >>>> + return PTR_ERR(ctx->sysreg); >>>> + } >>>> + } >>>> + >>>> for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) { >>>> struct clk *clk; >>>> >>>> >> >> > _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/exynos/decon5433: configure sysreg in case of hardware trigger 2017-01-05 10:35 ` Andrzej Hajda @ 2017-01-05 10:49 ` Inki Dae 0 siblings, 0 replies; 8+ messages in thread From: Inki Dae @ 2017-01-05 10:49 UTC (permalink / raw) To: Andrzej Hajda, dri-devel; +Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz 2017년 01월 05일 19:35에 Andrzej Hajda 이(가) 쓴 글: > On 05.01.2017 11:19, Inki Dae wrote: >> >> 2017년 01월 05일 19:15에 Andrzej Hajda 이(가) 쓴 글: >>> On 05.01.2017 11:05, Inki Dae wrote: >>>> 2017년 01월 02일 17:39에 Andrzej Hajda 이(가) 쓴 글: >>>>> In case of HW trigger mode, sysreg register should be configured to >>>>> enable TE functionality. The patch refactors also trigger setup function. >>>>> >>>>> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> >>>>> --- >>>>> v2: fixed bitop operator (thanks Ilia) >>>>> --- >>>>> drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 40 +++++++++++++++++++++------ >>>>> 1 file changed, 32 insertions(+), 8 deletions(-) >>>>> >>>>> diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c >>>>> index 6ca1f31..b63b8e6 100644 >>>>> --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c >>>>> +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c >>>>> @@ -13,9 +13,11 @@ >>>>> #include <linux/platform_device.h> >>>>> #include <linux/clk.h> >>>>> #include <linux/component.h> >>>>> +#include <linux/mfd/syscon.h> >>>>> #include <linux/of_device.h> >>>>> #include <linux/of_gpio.h> >>>>> #include <linux/pm_runtime.h> >>>>> +#include <linux/regmap.h> >>>>> >>>>> #include <video/exynos5433_decon.h> >>>>> >>>>> @@ -25,6 +27,9 @@ >>>>> #include "exynos_drm_plane.h" >>>>> #include "exynos_drm_iommu.h" >>>>> >>>>> +#define DSD_CFG_MUX 0x1004 >>>>> +#define DSD_CFG_MUX_TE_UNMASK_GLOBAL BIT(13) >>>>> + >>>>> #define WINDOWS_NR 3 >>>>> #define MIN_FB_WIDTH_FOR_16WORD_BURST 128 >>>>> >>>>> @@ -56,6 +61,7 @@ struct decon_context { >>>>> struct exynos_drm_plane planes[WINDOWS_NR]; >>>>> struct exynos_drm_plane_config configs[WINDOWS_NR]; >>>>> void __iomem *addr; >>>>> + struct regmap *sysreg; >>>>> struct clk *clks[ARRAY_SIZE(decon_clks_name)]; >>>>> int pipe; >>>>> unsigned long flags; >>>>> @@ -117,12 +123,22 @@ static void decon_disable_vblank(struct exynos_drm_crtc *crtc) >>>>> >>>>> static void decon_setup_trigger(struct decon_context *ctx) >>>>> { >>>>> - u32 val = !(ctx->out_type & I80_HW_TRG) >>>>> - ? TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | >>>>> - TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN >>>>> - : TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | >>>>> - TRIGCON_HWTRIGMASK | TRIGCON_HWTRIGEN; >>>>> - writel(val, ctx->addr + DECON_TRIGCON); >>>>> + if (!(ctx->out_type & (IFTYPE_I80 | I80_HW_TRG))) >>>>> + return; >>>>> + >>>>> + if (!(ctx->out_type & I80_HW_TRG)) { >>>>> + writel(TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN >>>>> + | TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN, >>>>> + ctx->addr + DECON_TRIGCON); >>>>> + return; >>>>> + } >>>>> + >>>>> + writel(TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | TRIGCON_HWTRIGMASK >>>>> + | TRIGCON_HWTRIGEN, ctx->addr + DECON_TRIGCON); >>>>> + >>>>> + if (regmap_update_bits(ctx->sysreg, DSD_CFG_MUX, >>>>> + DSD_CFG_MUX_TE_UNMASK_GLOBAL, ~0)) >>>>> + DRM_ERROR("Cannot update sysreg.\n"); >>>>> } >>>>> >>>>> static void decon_commit(struct exynos_drm_crtc *crtc) >>>>> @@ -147,8 +163,7 @@ static void decon_commit(struct exynos_drm_crtc *crtc) >>>>> val = CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F; >>>>> writel(val, ctx->addr + DECON_CMU); >>>>> >>>>> - if (ctx->out_type & (IFTYPE_I80 | I80_HW_TRG)) >>>>> - decon_setup_trigger(ctx); >>>>> + decon_setup_trigger(ctx); >>>> Calling this function in video mode is unnecessary. Why did you remove above condition? >>> I have moved the condition to decon_setup_trigger. >> In video mode, it doesn't need to even call decon_setup_trigger function even though this function is just returned. >> This is really trivial but it'd better not to call this function so seems no reason to modify. > > The function is inlined anyway so it does not matter from efficiency > point of view. The good point in this change is that it puts trigger > related code into one function making decon_commit little bit less messy. I don't see how much this change mitigates making decon_commit to be messy because already same codes are here and there. Anyway really trivial thing. Will merge it. Stubborn. :) > > Regards > Andrzej > > >> >>> Regards >>> Andrzej >>> >>>>> >>>>> /* lcd on and use command if */ >>>>> val = VIDOUT_LCD_ON; >>>>> @@ -640,6 +655,15 @@ static int exynos5433_decon_probe(struct platform_device *pdev) >>>>> ctx->out_type |= IFTYPE_I80; >>>>> } >>>>> >>>>> + if (ctx->out_type & I80_HW_TRG) { >>>>> + ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node, >>>>> + "samsung,disp-sysreg"); >>>>> + if (IS_ERR(ctx->sysreg)) { >>>>> + dev_err(dev, "failed to get system register\n"); >>>>> + return PTR_ERR(ctx->sysreg); >>>>> + } >>>>> + } >>>>> + >>>>> for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) { >>>>> struct clk *clk; >>>>> >>>>> >>> >>> >> > > > _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2017-01-05 10:49 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CGME20161228103032eucas1p29ea330729658adef9a933063f4ed96fc@eucas1p2.samsung.com>
2016-12-28 10:30 ` [PATCH] drm/exynos/decon5433: configure sysreg in case of hardware trigger Andrzej Hajda
2016-12-28 14:42 ` Ilia Mirkin
[not found] ` <CGME20170102083922eucas1p1d327e428675b67876e8f3462f0bcf170@eucas1p1.samsung.com>
2017-01-02 8:39 ` Andrzej Hajda
2017-01-05 10:05 ` Inki Dae
2017-01-05 10:15 ` Andrzej Hajda
2017-01-05 10:19 ` Inki Dae
2017-01-05 10:35 ` Andrzej Hajda
2017-01-05 10:49 ` Inki Dae
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.