* Re: Is: EPT violations. Was:Re: Problems with pci/vga passthrough
2017-01-18 16:20 ` Is: EPT violations. Was:Re: " Konrad Rzeszutek Wilk
2017-01-18 16:42 ` Jan Beulich
2017-01-18 16:47 ` George Dunlap
@ 2017-01-22 18:30 ` Diederik de Haas
2017-01-24 15:59 ` Diederik de Haas
2 siblings, 1 reply; 13+ messages in thread
From: Diederik de Haas @ 2017-01-22 18:30 UTC (permalink / raw)
To: xen-devel
[-- Attachment #1.1.1: Type: text/plain, Size: 1969 bytes --]
Got a new video cart, so gave it another go.
Still no luck and (mostly?) the same issues.
New video card: http://xfxforce.com/en-us/products/amd-radeon-rx-400-series/
rx-460-4gb-heatsink-rx-460p4hfg5-
One particular thing I noticed is that I get (something that looks like) a
kernel crash when booting the kernel with Xen, which I don't get when choosing
the GRUB option without Xen.
See `cknowsvr01-dmesg-with-xen.txt` vs `cknowsvr01-dmesg-without-xen.txt`.
On woensdag 18 januari 2017 11:20:50 CET Konrad Rzeszutek Wilk wrote:
> Can you also kindly attach lspci -vvv output?
See `cknowsvr01-lspci-vvv.txt`
> And also repost 'xl dmesg' but make sure you have 'iommu=verbose,debug
> loglvl=all guest_loglvl=all' on your Xen command line?
See `cknowsvr01-xlinfo-xldmesg.txt`
In order to get vga-passthrough working, I've made some further configuration
changes which I'll attach as well.
Changes in `/etc/modprobe.d/vga-passthrough.conf`, `/etc/modules`, the loaded
kernel modules regarding amd (vga card) and xen and the kernel configuration
wrt xen are in `cknowsvr01-kernel-config.txt`
Changes I've made wrt grub and the complete grub.cfg are in `cknowsvr01-
grub.txt`.
The item in which I didn't get a kernel crash (see above) was "Debian GNU/
Linux" and the one I do get a kernel crash is "Debian GNU/Linux, with Xen
hypervisor"
The configuration file of the VM in which I try to get vga passthrough working
is `cknowsvr01-tradestation.home.cknow.org.cfg.txt`
When I enable the 3 items in "PCI devices" of that config file, the VM crashes
and gets in the crash loop I mentioned in my first post to this list.
The logfile of that is attached as `cknowsvr01-xl-
tradestation.home.cknow.org.log.txt`
And finally I have added the kernel 'config' of the VM itself in `tradestation-
kernel-config.txt`
I hope I have provided complete info with this. If not, let me know what you'd
like to see and I'll do my best to provide it.
Cheers,
Diederik
[-- Attachment #1.1.2: cknowsvr01-dmesg-with-xen.txt --]
[-- Type: text/plain, Size: 79976 bytes --]
root@cknowsvr01:/home/diederik# cat /proc/cmdline
placeholder root=UUID=0e49acdd-69d2-4c95-a5fc-3e1f4daa9b65 ro quiet
root@cknowsvr01:/home/diederik# dmesg
[ 0.000000] Linux version 4.8.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.1 20161202 (Debian 5.4.1-4) ) #1 SMP Debian 4.8.15-2 (2017-01-04)
[ 0.000000] Command line: placeholder root=UUID=0e49acdd-69d2-4c95-a5fc-3e1f4daa9b65 ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] Released 0 page(s)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] Xen: [mem 0x000000000009e800-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x0000000079cfbfff] usable
[ 0.000000] Xen: [mem 0x0000000079cfc000-0x000000007b8c1fff] reserved
[ 0.000000] Xen: [mem 0x000000007b8c2000-0x000000007b934fff] ACPI data
[ 0.000000] Xen: [mem 0x000000007b935000-0x000000007bedffff] ACPI NVS
[ 0.000000] Xen: [mem 0x000000007bee0000-0x000000008fffffff] reserved
[ 0.000000] Xen: [mem 0x00000000c7ffc000-0x00000000c7ffcfff] reserved
[ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved
[ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[ 0.000000] Xen: [mem 0x00000000fec40000-0x00000000fec40fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x0000000286365fff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. Z10PA-D8 Series/Z10PA-D8 Series, BIOS 3202 04/18/2016
[ 0.000000] Hypervisor detected: Xen
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x286366 max_arch_pfn = 0x400000000
[ 0.000000] MTRR: Disabled
[ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC
[ 0.000000] e820: last_pfn = 0x79cfc max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] BRK [0x01d3f000, 0x01d3ffff] PGTABLE
[ 0.000000] BRK [0x01d40000, 0x01d40fff] PGTABLE
[ 0.000000] BRK [0x01d41000, 0x01d41fff] PGTABLE
[ 0.000000] BRK [0x01d42000, 0x01d42fff] PGTABLE
[ 0.000000] BRK [0x01d43000, 0x01d43fff] PGTABLE
[ 0.000000] BRK [0x01d44000, 0x01d44fff] PGTABLE
[ 0.000000] BRK [0x01d45000, 0x01d45fff] PGTABLE
[ 0.000000] BRK [0x01d46000, 0x01d46fff] PGTABLE
[ 0.000000] BRK [0x01d47000, 0x01d47fff] PGTABLE
[ 0.000000] BRK [0x01d48000, 0x01d48fff] PGTABLE
[ 0.000000] BRK [0x01d49000, 0x01d49fff] PGTABLE
[ 0.000000] BRK [0x01d4a000, 0x01d4afff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x02000000-0x0332ffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0580 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000007B8EA0B0 0000D4 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007B919410 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000007B8EA218 02F1F7 (v02 ALASKA A M I 01072009 INTL 20091013)
[ 0.000000] ACPI: FACS 0x000000007BEDEF80 000040
[ 0.000000] ACPI: APIC 0x000000007B919520 000224 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007B919748 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000007B919790 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000007B919830 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: EINJ 0x000000007B9347D0 000130 (v01 ALASKA A M I 00000001 INTL 00000001)
[ 0.000000] ACPI: UEFI 0x000000007B9198C8 000042 (v01 ALASKA A M I 01072009 00000000)
[ 0.000000] ACPI: HPET 0x000000007B919910 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
[ 0.000000] ACPI: MSCT 0x000000007B919948 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
[ 0.000000] ACPI: SLIT 0x000000007B9199D8 000030 (v01 ALASKA A M I 00000001 INTL 20091013)
[ 0.000000] ACPI: SRAT 0x000000007B919A08 001158 (v03 ALASKA A M I 00000001 INTL 20091013)
[ 0.000000] ACPI: WDDT 0x000000007B91AB60 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
[ 0.000000] ACPI: SSDT 0x000000007B91ABA0 016FB3 (v02 ALASKA PmMgt 00000001 INTL 20120913)
[ 0.000000] ACPI: NITR 0x000000007B931B58 000071 (v02 ALASKA A M I 00000001 INTL 20091013)
[ 0.000000] ACPI: SPMI 0x000000007B931BD0 000041 (v05 ALASKA A M I 00000000 AMI. 00000000)
[ 0.000000] ACPI: SSDT 0x000000007B931C18 002652 (v02 ALASKA SpsNm 00000002 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000007B934270 000064 (v02 ALASKA SpsNvs 00000002 INTL 20120913)
[ 0.000000] ACPI: PRAD 0x000000007B9342D8 000102 (v02 ALASKA A M I 00000002 INTL 20120913)
[ 0.000000] ACPI: RMAD 0x000000007B9343E0 0000E8 (v01 ALASKA A M I 00000001 INTL 20091013)
[ 0.000000] ACPI: HEST 0x000000007B9344C8 0000A8 (v01 ALASKA A M I 00000001 INTL 00000001)
[ 0.000000] ACPI: BERT 0x000000007B934570 000030 (v01 ALASKA A M I 00000001 INTL 00000001)
[ 0.000000] ACPI: ERST 0x000000007B9345A0 000230 (v01 ALASKA A M I 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Setting APIC routing to Xen PV.
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000286365fff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1ff00e000-0x1ff012fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000286365fff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000079cfbfff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000286365fff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000286365fff]
[ 0.000000] On node 0 totalpages: 2097151
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7732 pages used for memmap
[ 0.000000] DMA32 zone: 494844 pages, LIFO batch:31
[ 0.000000] Normal zone: 24974 pages used for memmap
[ 0.000000] Normal zone: 1598310 pages, LIFO batch:31
[ 0.000000] p2m virtual area at ffffc90000000000, size is 40000000
[ 0.000000] Remapped 549734 page(s)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
[ 0.000000] IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 32 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79cfc000-0x7b8c1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b8c2000-0x7b934fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b935000-0x7bedffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7bee0000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xc7ffbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7ffc000-0xc7ffcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7ffd000-0xfbffbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfbffc000-0xfbffcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfbffd000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec40000-0xfec40fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec41000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x90000000-0xc7ffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.8.0 (preserve-AD)
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff880285a00000 s103384 r8192 d31784 u262144
[ 0.000000] pcpu-alloc: s103384 r8192 d31784 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
[ 0.000000] xen: PV spinlocks enabled
[ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2064360
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: placeholder root=UUID=0e49acdd-69d2-4c95-a5fc-3e1f4daa9b65 ro quiet
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 126976 bytes
[ 0.000000] log_buf_len min size: 131072 bytes
[ 0.000000] log_buf_len: 262144 bytes
[ 0.000000] early log buf free: 117796(89%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] software IO TLB [mem 0x281a00000-0x285a00000] (64MB) mapped at [ffff880281a00000-ffff8802859fffff]
[ 0.000000] Memory: 8117928K/8388604K available (6070K kernel code, 1124K rwdata, 2808K rodata, 1360K init, 800K bss, 270676K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=32.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=32
[ 0.000000] Using NULL legacy PIC
[ 0.000000] NR_IRQS:33024 nr_irqs:1496 0
[ 0.000000] xen:events: Using FIFO-based ABI
[ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2)
[ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5)
[ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6)
[ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7)
[ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10)
[ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11)
[ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14)
[ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15)
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2095.098 MHz processor
[ 12.544001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.31 BogoMIPS (lpj=8380632)
[ 12.544004] pid_max: default: 32768 minimum: 301
[ 12.544050] ACPI: Core revision 20160422
[ 12.632359] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 12.632779] Security Framework initialized
[ 12.632780] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 12.632786] AppArmor: AppArmor disabled by boot time parameter
[ 12.633974] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 12.636030] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 12.636824] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 12.636844] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 12.637271] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 12.637271] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 12.637274] CPU: Physical Processor ID: 0
[ 12.637275] CPU: Processor Core ID: 0
[ 12.637279] mce: CPU supports 2 MCE banks
[ 12.637298] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 12.637299] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 12.637696] Freeing SMP alternatives memory: 24K (ffffffff81c6f000 - ffffffff81c75000)
[ 12.639898] ftrace: allocating 24736 entries in 97 pages
[ 12.651515] cpu 0 spinlock event irq 73
[ 12.651524] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 12.651549] smpboot: Max logical packages: 4
[ 12.651558] Could not initialize VPMU for cpu 0, error -95
[ 12.651584] Performance Events: Broadwell events, PMU not available due to virtualization, using software events only.
[ 12.652649] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 12.652649] NMI watchdog: Shutting down hard lockup detector on all cpus
[ 12.652775] installing Xen timer for CPU 1
[ 12.652786] cpu 1 spinlock event irq 80
[ 12.653145] installing Xen timer for CPU 2
[ 12.653155] cpu 2 spinlock event irq 87
[ 12.653474] installing Xen timer for CPU 3
[ 12.653484] cpu 3 spinlock event irq 94
[ 12.653810] installing Xen timer for CPU 4
[ 12.653819] cpu 4 spinlock event irq 101
[ 12.654147] installing Xen timer for CPU 5
[ 12.654156] cpu 5 spinlock event irq 108
[ 12.654484] installing Xen timer for CPU 6
[ 12.654493] cpu 6 spinlock event irq 115
[ 12.654808] installing Xen timer for CPU 7
[ 12.654817] cpu 7 spinlock event irq 122
[ 12.655121] installing Xen timer for CPU 8
[ 12.655131] cpu 8 spinlock event irq 129
[ 12.655440] installing Xen timer for CPU 9
[ 12.655463] cpu 9 spinlock event irq 136
[ 12.655763] installing Xen timer for CPU 10
[ 12.655771] cpu 10 spinlock event irq 143
[ 12.656084] installing Xen timer for CPU 11
[ 12.656092] cpu 11 spinlock event irq 150
[ 12.656389] installing Xen timer for CPU 12
[ 12.656398] cpu 12 spinlock event irq 157
[ 12.656709] installing Xen timer for CPU 13
[ 12.656719] cpu 13 spinlock event irq 164
[ 12.657013] installing Xen timer for CPU 14
[ 12.657027] cpu 14 spinlock event irq 171
[ 12.657322] installing Xen timer for CPU 15
[ 12.657335] cpu 15 spinlock event irq 178
[ 12.657613] installing Xen timer for CPU 16
[ 12.657622] cpu 16 spinlock event irq 185
[ 12.657999] installing Xen timer for CPU 17
[ 12.658009] cpu 17 spinlock event irq 192
[ 12.658308] installing Xen timer for CPU 18
[ 12.658319] cpu 18 spinlock event irq 199
[ 12.658629] installing Xen timer for CPU 19
[ 12.658638] cpu 19 spinlock event irq 206
[ 12.658934] installing Xen timer for CPU 20
[ 12.658943] cpu 20 spinlock event irq 213
[ 12.659253] installing Xen timer for CPU 21
[ 12.659263] cpu 21 spinlock event irq 220
[ 12.659561] installing Xen timer for CPU 22
[ 12.659571] cpu 22 spinlock event irq 227
[ 12.659881] installing Xen timer for CPU 23
[ 12.659891] cpu 23 spinlock event irq 234
[ 12.660193] installing Xen timer for CPU 24
[ 12.660203] cpu 24 spinlock event irq 241
[ 12.660516] installing Xen timer for CPU 25
[ 12.660526] cpu 25 spinlock event irq 248
[ 12.660833] installing Xen timer for CPU 26
[ 12.660842] cpu 26 spinlock event irq 255
[ 12.661157] installing Xen timer for CPU 27
[ 12.661167] cpu 27 spinlock event irq 262
[ 12.661467] installing Xen timer for CPU 28
[ 12.661478] cpu 28 spinlock event irq 269
[ 12.661789] installing Xen timer for CPU 29
[ 12.661799] cpu 29 spinlock event irq 276
[ 12.662095] installing Xen timer for CPU 30
[ 12.662110] cpu 30 spinlock event irq 283
[ 12.662422] installing Xen timer for CPU 31
[ 12.662436] cpu 31 spinlock event irq 290
[ 12.662623] x86: Booted up 1 node, 32 CPUs
[ 12.663907] devtmpfs: initialized
[ 12.663980] x86/mm: Memory block size: 128MB
[ 12.667210] PM: Registering ACPI NVS region [mem 0x7b935000-0x7bedffff] (5943296 bytes)
[ 12.667580] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 12.667880] pinctrl core: initialized pinctrl subsystem
[ 12.668137] NET: Registered protocol family 16
[ 12.668145] xen:grant_table: Grant tables using version 1 layout
[ 12.668158] Grant table initialized
[ 12.668387] ACPI: bus type PCI registered
[ 12.668389] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 12.669062] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
[ 12.669064] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
[ 12.700415] PCI: Using configuration type 1 for base access
[ 12.717390] ACPI: Added _OSI(Module Device)
[ 12.717391] ACPI: Added _OSI(Processor Device)
[ 12.717392] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 12.717393] ACPI: Added _OSI(Processor Aggregator Device)
[ 12.717555] xen: registering gsi 9 triggering 0 polarity 0
[ 12.736964] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 12.793591] ACPI: Dynamic OEM Table Load:
[ 12.793594] ACPI: PRAD 0x0000000000000000 000102 (v02 ALASKA A M I 00000002 INTL 20120913)
[ 12.812051] random: fast init done
[ 12.842147] ACPI: Interpreter enabled
[ 12.842163] ACPI: (supports S0 S4 S5)
[ 12.842164] ACPI: Using IOAPIC for interrupt routing
[ 12.842233] HEST: Table parsing has been initialized.
[ 12.842236] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 12.896013] ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
[ 12.896017] acpi PNP0A03:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 12.900764] acpi PNP0A03:02: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 12.900817] PCI host bridge to bus 0000:ff
[ 12.900818] pci_bus 0000:ff: root bus resource [bus ff]
[ 12.900843] pci 0000:ff:08.0: [8086:6f80] type 00 class 0x088000
[ 12.900988] pci 0000:ff:08.2: [8086:6f32] type 00 class 0x110100
[ 12.901120] pci 0000:ff:08.3: [8086:6f83] type 00 class 0x088000
[ 12.901278] pci 0000:ff:09.0: [8086:6f90] type 00 class 0x088000
[ 12.901402] pci 0000:ff:09.2: [8086:6f33] type 00 class 0x110100
[ 12.901533] pci 0000:ff:09.3: [8086:6f93] type 00 class 0x088000
[ 12.901690] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000
[ 12.901810] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100
[ 12.901932] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100
[ 12.902052] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000
[ 12.902180] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000
[ 12.902302] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000
[ 12.902423] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000
[ 12.902544] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000
[ 12.902665] pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000
[ 12.902786] pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000
[ 12.902907] pci 0000:ff:0c.6: [8086:6fe6] type 00 class 0x088000
[ 12.903027] pci 0000:ff:0c.7: [8086:6fe7] type 00 class 0x088000
[ 12.903151] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000
[ 12.903271] pci 0000:ff:0f.1: [8086:6ff9] type 00 class 0x088000
[ 12.903397] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000
[ 12.904453] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000
[ 12.904573] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000
[ 12.904695] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000
[ 12.904814] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100
[ 12.904939] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000
[ 12.905059] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100
[ 12.905179] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000
[ 12.905300] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000
[ 12.905370] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100
[ 12.905509] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000
[ 12.905685] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000
[ 12.905837] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000
[ 12.905989] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000
[ 12.906141] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000
[ 12.906294] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000
[ 12.906440] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000
[ 12.906565] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000
[ 12.906695] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000
[ 12.906851] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000
[ 12.907007] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000
[ 12.907166] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000
[ 12.907315] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000
[ 12.907439] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000
[ 12.907563] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000
[ 12.907687] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000
[ 12.907817] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000
[ 12.907975] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000
[ 12.908131] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000
[ 12.908286] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000
[ 12.908460] pci 0000:ff:16.0: [8086:6f68] type 00 class 0x088000
[ 12.908620] pci 0000:ff:16.6: [8086:6f6e] type 00 class 0x088000
[ 12.908744] pci 0000:ff:16.7: [8086:6f6f] type 00 class 0x088000
[ 12.908872] pci 0000:ff:17.0: [8086:6fd0] type 00 class 0x088000
[ 12.909031] pci 0000:ff:17.4: [8086:6fb8] type 00 class 0x088000
[ 12.909156] pci 0000:ff:17.5: [8086:6fb9] type 00 class 0x088000
[ 12.909280] pci 0000:ff:17.6: [8086:6fba] type 00 class 0x088000
[ 12.909402] pci 0000:ff:17.7: [8086:6fbb] type 00 class 0x088000
[ 12.909542] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000
[ 12.909666] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000
[ 12.909789] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000
[ 12.909914] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000
[ 12.909981] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000
[ 12.910115] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000
[ 12.910241] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000
[ 12.910436] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
[ 12.910440] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 12.912544] acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 12.912597] PCI host bridge to bus 0000:7f
[ 12.912598] pci_bus 0000:7f: root bus resource [bus 7f]
[ 12.912620] pci 0000:7f:08.0: [8086:6f80] type 00 class 0x088000
[ 12.912752] pci 0000:7f:08.2: [8086:6f32] type 00 class 0x110100
[ 12.912882] pci 0000:7f:08.3: [8086:6f83] type 00 class 0x088000
[ 12.913034] pci 0000:7f:09.0: [8086:6f90] type 00 class 0x088000
[ 12.913158] pci 0000:7f:09.2: [8086:6f33] type 00 class 0x110100
[ 12.913287] pci 0000:7f:09.3: [8086:6f93] type 00 class 0x088000
[ 12.913440] pci 0000:7f:0b.0: [8086:6f81] type 00 class 0x088000
[ 12.913557] pci 0000:7f:0b.1: [8086:6f36] type 00 class 0x110100
[ 12.913674] pci 0000:7f:0b.2: [8086:6f37] type 00 class 0x110100
[ 12.913790] pci 0000:7f:0b.3: [8086:6f76] type 00 class 0x088000
[ 12.913912] pci 0000:7f:0c.0: [8086:6fe0] type 00 class 0x088000
[ 12.914028] pci 0000:7f:0c.1: [8086:6fe1] type 00 class 0x088000
[ 12.914143] pci 0000:7f:0c.2: [8086:6fe2] type 00 class 0x088000
[ 12.914258] pci 0000:7f:0c.3: [8086:6fe3] type 00 class 0x088000
[ 12.914374] pci 0000:7f:0c.4: [8086:6fe4] type 00 class 0x088000
[ 12.914493] pci 0000:7f:0c.5: [8086:6fe5] type 00 class 0x088000
[ 12.914611] pci 0000:7f:0c.6: [8086:6fe6] type 00 class 0x088000
[ 12.914730] pci 0000:7f:0c.7: [8086:6fe7] type 00 class 0x088000
[ 12.914851] pci 0000:7f:0f.0: [8086:6ff8] type 00 class 0x088000
[ 12.914969] pci 0000:7f:0f.1: [8086:6ff9] type 00 class 0x088000
[ 12.915094] pci 0000:7f:0f.4: [8086:6ffc] type 00 class 0x088000
[ 12.915213] pci 0000:7f:0f.5: [8086:6ffd] type 00 class 0x088000
[ 12.915333] pci 0000:7f:0f.6: [8086:6ffe] type 00 class 0x088000
[ 12.915453] pci 0000:7f:10.0: [8086:6f1d] type 00 class 0x088000
[ 12.915573] pci 0000:7f:10.1: [8086:6f34] type 00 class 0x110100
[ 12.915697] pci 0000:7f:10.5: [8086:6f1e] type 00 class 0x088000
[ 12.915817] pci 0000:7f:10.6: [8086:6f7d] type 00 class 0x110100
[ 12.915935] pci 0000:7f:10.7: [8086:6f1f] type 00 class 0x088000
[ 12.916055] pci 0000:7f:12.0: [8086:6fa0] type 00 class 0x088000
[ 12.916126] pci 0000:7f:12.1: [8086:6f30] type 00 class 0x110100
[ 12.916265] pci 0000:7f:13.0: [8086:6fa8] type 00 class 0x088000
[ 12.916435] pci 0000:7f:13.1: [8086:6f71] type 00 class 0x088000
[ 12.916587] pci 0000:7f:13.2: [8086:6faa] type 00 class 0x088000
[ 12.916738] pci 0000:7f:13.3: [8086:6fab] type 00 class 0x088000
[ 12.916888] pci 0000:7f:13.4: [8086:6fac] type 00 class 0x088000
[ 12.917041] pci 0000:7f:13.5: [8086:6fad] type 00 class 0x088000
[ 12.917188] pci 0000:7f:13.6: [8086:6fae] type 00 class 0x088000
[ 12.917309] pci 0000:7f:13.7: [8086:6faf] type 00 class 0x088000
[ 12.917435] pci 0000:7f:14.0: [8086:6fb0] type 00 class 0x088000
[ 12.917586] pci 0000:7f:14.1: [8086:6fb1] type 00 class 0x088000
[ 12.917735] pci 0000:7f:14.2: [8086:6fb2] type 00 class 0x088000
[ 12.917885] pci 0000:7f:14.3: [8086:6fb3] type 00 class 0x088000
[ 12.918032] pci 0000:7f:14.4: [8086:6fbc] type 00 class 0x088000
[ 12.918151] pci 0000:7f:14.5: [8086:6fbd] type 00 class 0x088000
[ 12.918270] pci 0000:7f:14.6: [8086:6fbe] type 00 class 0x088000
[ 12.918390] pci 0000:7f:14.7: [8086:6fbf] type 00 class 0x088000
[ 12.918516] pci 0000:7f:15.0: [8086:6fb4] type 00 class 0x088000
[ 12.918669] pci 0000:7f:15.1: [8086:6fb5] type 00 class 0x088000
[ 12.918823] pci 0000:7f:15.2: [8086:6fb6] type 00 class 0x088000
[ 12.918976] pci 0000:7f:15.3: [8086:6fb7] type 00 class 0x088000
[ 12.919134] pci 0000:7f:16.0: [8086:6f68] type 00 class 0x088000
[ 12.919294] pci 0000:7f:16.6: [8086:6f6e] type 00 class 0x088000
[ 12.919420] pci 0000:7f:16.7: [8086:6f6f] type 00 class 0x088000
[ 12.919544] pci 0000:7f:17.0: [8086:6fd0] type 00 class 0x088000
[ 12.919699] pci 0000:7f:17.4: [8086:6fb8] type 00 class 0x088000
[ 12.919820] pci 0000:7f:17.5: [8086:6fb9] type 00 class 0x088000
[ 12.919943] pci 0000:7f:17.6: [8086:6fba] type 00 class 0x088000
[ 12.920069] pci 0000:7f:17.7: [8086:6fbb] type 00 class 0x088000
[ 12.920207] pci 0000:7f:1e.0: [8086:6f98] type 00 class 0x088000
[ 12.920332] pci 0000:7f:1e.1: [8086:6f99] type 00 class 0x088000
[ 12.920463] pci 0000:7f:1e.2: [8086:6f9a] type 00 class 0x088000
[ 12.920583] pci 0000:7f:1e.3: [8086:6fc0] type 00 class 0x088000
[ 12.920650] pci 0000:7f:1e.4: [8086:6f9c] type 00 class 0x088000
[ 12.920778] pci 0000:7f:1f.0: [8086:6f88] type 00 class 0x088000
[ 12.920906] pci 0000:7f:1f.2: [8086:6f8a] type 00 class 0x088000
[ 12.934794] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 12.934797] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 12.936940] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 12.937413] PCI host bridge to bus 0000:00
[ 12.937415] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 12.937417] pci_bus 0000:00: root bus resource [io 0x1000-0xbfff window]
[ 12.937419] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 12.937420] pci_bus 0000:00: root bus resource [mem 0x90000000-0xc7ffbfff window]
[ 12.937422] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 12.937439] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000
[ 12.937683] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400
[ 12.937808] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 12.937899] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 12.937962] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400
[ 12.938086] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 12.938174] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 12.938235] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400
[ 12.938358] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 12.938445] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 12.938503] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000
[ 12.938718] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000
[ 12.938957] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000
[ 12.939170] pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020
[ 12.939188] pci 0000:00:05.4: reg 0x10: [mem 0xc7f19000-0xc7f19fff]
[ 12.939452] pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
[ 12.939801] pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
[ 12.939844] pci 0000:00:11.4: reg 0x10: [io 0xb110-0xb117]
[ 12.939861] pci 0000:00:11.4: reg 0x14: [io 0xb100-0xb103]
[ 12.939877] pci 0000:00:11.4: reg 0x18: [io 0xb0f0-0xb0f7]
[ 12.939894] pci 0000:00:11.4: reg 0x1c: [io 0xb0e0-0xb0e3]
[ 12.939910] pci 0000:00:11.4: reg 0x20: [io 0xb020-0xb03f]
[ 12.939926] pci 0000:00:11.4: reg 0x24: [mem 0xc7f18000-0xc7f187ff]
[ 12.940017] pci 0000:00:11.4: PME# supported from D3hot
[ 12.940184] pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
[ 12.940221] pci 0000:00:14.0: reg 0x10: [mem 0xc7f00000-0xc7f0ffff 64bit]
[ 12.940364] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 12.940484] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 12.940562] pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
[ 12.940599] pci 0000:00:16.0: reg 0x10: [mem 0xc7f17000-0xc7f1700f 64bit]
[ 12.940745] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 12.940895] pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000
[ 12.940932] pci 0000:00:16.1: reg 0x10: [mem 0xc7f16000-0xc7f1600f 64bit]
[ 12.941076] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
[ 12.941251] pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
[ 12.941293] pci 0000:00:1a.0: reg 0x10: [mem 0xc7f14000-0xc7f143ff]
[ 12.941471] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 12.941579] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 12.941659] pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
[ 12.941819] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 12.941882] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 12.941887] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 12.941950] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 12.942034] pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
[ 12.942193] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 12.942241] pci 0000:00:1c.4: Enabling MPC IRBNCE
[ 12.942245] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
[ 12.942310] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 12.942389] pci 0000:00:1c.5: [8086:8d1a] type 01 class 0x060400
[ 12.942546] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 12.942586] pci 0000:00:1c.5: Enabling MPC IRBNCE
[ 12.942591] pci 0000:00:1c.5: Intel PCH root port ACS workaround enabled
[ 12.942653] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 12.942736] pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
[ 12.942770] pci 0000:00:1d.0: reg 0x10: [mem 0xc7f13000-0xc7f133ff]
[ 12.942955] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 12.943062] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 12.943144] pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
[ 12.943486] pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
[ 12.943527] pci 0000:00:1f.2: reg 0x10: [io 0xb070-0xb077]
[ 12.943551] pci 0000:00:1f.2: reg 0x14: [io 0xb060-0xb063]
[ 12.943567] pci 0000:00:1f.2: reg 0x18: [io 0xb050-0xb057]
[ 12.943582] pci 0000:00:1f.2: reg 0x1c: [io 0xb040-0xb043]
[ 12.943597] pci 0000:00:1f.2: reg 0x20: [io 0xb000-0xb01f]
[ 12.943614] pci 0000:00:1f.2: reg 0x24: [mem 0xc7f12000-0xc7f127ff]
[ 12.943705] pci 0000:00:1f.2: PME# supported from D3hot
[ 12.943852] pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
[ 12.943882] pci 0000:00:1f.3: reg 0x10: [mem 0xc7f11000-0xc7f110ff 64bit]
[ 12.943928] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
[ 12.944374] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 12.944681] pci 0000:02:00.0: [1002:67ef] type 00 class 0x030000
[ 12.944713] pci 0000:02:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 12.944738] pci 0000:02:00.0: reg 0x18: [mem 0xc0000000-0xc01fffff 64bit pref]
[ 12.944753] pci 0000:02:00.0: reg 0x20: [io 0xa000-0xa0ff]
[ 12.944767] pci 0000:02:00.0: reg 0x24: [mem 0xc7e00000-0xc7e3ffff]
[ 12.944784] pci 0000:02:00.0: reg 0x30: [mem 0xc7e40000-0xc7e5ffff pref]
[ 12.944894] pci 0000:02:00.0: supports D1 D2
[ 12.944895] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 12.945042] pci 0000:02:00.1: [1002:aae0] type 00 class 0x040300
[ 12.945071] pci 0000:02:00.1: reg 0x10: [mem 0xc7e60000-0xc7e63fff 64bit]
[ 12.945238] pci 0000:02:00.1: supports D1 D2
[ 12.945359] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 12.945364] pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
[ 12.945369] pci 0000:00:02.0: bridge window [mem 0xc7e00000-0xc7efffff]
[ 12.945377] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xc01fffff 64bit pref]
[ 12.945635] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 12.945749] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 12.945914] pci 0000:05:00.0: [8086:1533] type 00 class 0x020000
[ 12.945952] pci 0000:05:00.0: reg 0x10: [mem 0xc7d00000-0xc7d7ffff]
[ 12.946022] pci 0000:05:00.0: reg 0x18: [io 0x9000-0x901f]
[ 12.946057] pci 0000:05:00.0: reg 0x1c: [mem 0xc7d80000-0xc7d83fff]
[ 12.946309] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 12.960700] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 12.960716] pci 0000:00:1c.4: bridge window [io 0x9000-0x9fff]
[ 12.960721] pci 0000:00:1c.4: bridge window [mem 0xc7d00000-0xc7dfffff]
[ 12.960898] pci 0000:06:00.0: [8086:1533] type 00 class 0x020000
[ 12.960937] pci 0000:06:00.0: reg 0x10: [mem 0xc7c00000-0xc7c7ffff]
[ 12.960984] pci 0000:06:00.0: reg 0x18: [io 0x8000-0x801f]
[ 12.961008] pci 0000:06:00.0: reg 0x1c: [mem 0xc7c80000-0xc7c83fff]
[ 12.961262] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 12.976945] pci 0000:00:1c.5: PCI bridge to [bus 06]
[ 12.976960] pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff]
[ 12.976966] pci 0000:00:1c.5: bridge window [mem 0xc7c00000-0xc7cfffff]
[ 12.977062] pci_bus 0000:00: on NUMA node 0
[ 12.977148] xen: registering gsi 13 triggering 1 polarity 0
[ 12.978436] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
[ 12.978440] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 12.978813] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 12.979038] PCI host bridge to bus 0000:80
[ 12.979040] pci_bus 0000:80: root bus resource [io 0xc000-0xffff window]
[ 12.979041] pci_bus 0000:80: root bus resource [mem 0xc8000000-0xfbffbfff window]
[ 12.979043] pci_bus 0000:80: root bus resource [bus 80-fe]
[ 12.979069] pci 0000:80:05.0: [8086:6f28] type 00 class 0x088000
[ 12.979286] pci 0000:80:05.1: [8086:6f29] type 00 class 0x088000
[ 12.979524] pci 0000:80:05.2: [8086:6f2a] type 00 class 0x088000
[ 12.979727] pci 0000:80:05.4: [8086:6f2c] type 00 class 0x080020
[ 12.979745] pci 0000:80:05.4: reg 0x10: [mem 0xfbf00000-0xfbf00fff]
[ 12.980006] pci_bus 0000:80: on NUMA node 1
[ 12.980398] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 12 14 15)
[ 12.980506] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 *7 9 12 14 15)
[ 12.980613] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *10 12 14 15)
[ 12.980718] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 *11 12 14 15)
[ 12.980814] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 12.980937] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 12.981045] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 12.981149] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 12.981357] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 12.981609] xen:balloon: Initialising balloon driver
[ 12.981702] xen_balloon: Initialising balloon driver
[ 12.981887] vgaarb: setting as boot device: PCI:0000:02:00.0
[ 12.981888] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 12.981890] vgaarb: loaded
[ 12.981891] vgaarb: bridge control possible 0000:02:00.0
[ 12.982111] PCI: Using ACPI for IRQ routing
[ 12.996012] PCI: pci_cache_line_size set to 64 bytes
[ 12.996605] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 12.996606] e820: reserve RAM buffer [mem 0x79cfc000-0x7bffffff]
[ 12.996607] e820: reserve RAM buffer [mem 0x286366000-0x287ffffff]
[ 12.997048] clocksource: Switched to clocksource xen
[ 13.005876] VFS: Disk quotas dquot_6.6.0
[ 13.006008] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 13.006033] hugetlbfs: disabling because there are no supported hugepage sizes
[ 13.006069] pnp: PnP ACPI init
[ 13.006494] xen: registering gsi 8 triggering 1 polarity 0
[ 13.006542] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 13.006670] system 00:01: [io 0x0500-0x057f] has been reserved
[ 13.006672] system 00:01: [io 0x0400-0x047f] has been reserved
[ 13.006674] system 00:01: [io 0x0580-0x059f] has been reserved
[ 13.006675] system 00:01: [io 0x0600-0x061f] has been reserved
[ 13.006676] system 00:01: [io 0x0880-0x0883] has been reserved
[ 13.006678] system 00:01: [io 0x0800-0x081f] has been reserved
[ 13.006680] system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved
[ 13.006682] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
[ 13.006683] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[ 13.006684] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[ 13.006686] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
[ 13.006687] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
[ 13.006688] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
[ 13.006691] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 13.006935] system 00:02: [io 0x0290-0x029f] has been reserved
[ 13.006936] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 13.007346] xen: registering gsi 4 triggering 1 polarity 0
[ 13.007372] pnp 00:03: [dma 0 disabled]
[ 13.007417] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 13.007799] xen: registering gsi 3 triggering 1 polarity 0
[ 13.007816] pnp 00:04: [dma 0 disabled]
[ 13.007859] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 13.008760] pnp: PnP ACPI: found 5 devices
[ 13.017876] PM-Timer failed consistency check (0xffffff) - aborting.
[ 13.017962] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 13.017965] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 13.017967] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[ 13.018007] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 13.018009] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 13.018010] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 13.018012] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 13.018013] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 13.018015] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 13.018018] pci 0000:00:1c.0: BAR 14: assigned [mem 0x90000000-0x901fffff]
[ 13.018022] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref]
[ 13.018024] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 13.018026] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 13.018043] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 13.018046] pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
[ 13.018052] pci 0000:00:02.0: bridge window [mem 0xc7e00000-0xc7efffff]
[ 13.018056] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xc01fffff 64bit pref]
[ 13.018064] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 13.018081] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 13.018091] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 13.018099] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x901fffff]
[ 13.018104] pci 0000:00:1c.0: bridge window [mem 0x90200000-0x903fffff 64bit pref]
[ 13.018114] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 13.018117] pci 0000:00:1c.4: bridge window [io 0x9000-0x9fff]
[ 13.018124] pci 0000:00:1c.4: bridge window [mem 0xc7d00000-0xc7dfffff]
[ 13.018138] pci 0000:00:1c.5: PCI bridge to [bus 06]
[ 13.018141] pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff]
[ 13.018148] pci 0000:00:1c.5: bridge window [mem 0xc7c00000-0xc7cfffff]
[ 13.018163] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 13.018164] pci_bus 0000:00: resource 5 [io 0x1000-0xbfff window]
[ 13.018165] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 13.018166] pci_bus 0000:00: resource 7 [mem 0x90000000-0xc7ffbfff window]
[ 13.018168] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 13.018168] pci_bus 0000:02: resource 1 [mem 0xc7e00000-0xc7efffff]
[ 13.018170] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xc01fffff 64bit pref]
[ 13.018171] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 13.018172] pci_bus 0000:04: resource 1 [mem 0x90000000-0x901fffff]
[ 13.018173] pci_bus 0000:04: resource 2 [mem 0x90200000-0x903fffff 64bit pref]
[ 13.018174] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
[ 13.018175] pci_bus 0000:05: resource 1 [mem 0xc7d00000-0xc7dfffff]
[ 13.018176] pci_bus 0000:06: resource 0 [io 0x8000-0x8fff]
[ 13.018177] pci_bus 0000:06: resource 1 [mem 0xc7c00000-0xc7cfffff]
[ 13.018180] pci_bus 0000:80: resource 4 [io 0xc000-0xffff window]
[ 13.018181] pci_bus 0000:80: resource 5 [mem 0xc8000000-0xfbffbfff window]
[ 13.018548] NET: Registered protocol family 2
[ 13.019125] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 13.019391] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 13.019571] TCP: Hash tables configured (established 65536 bind 65536)
[ 13.019634] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 13.019676] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 13.019835] NET: Registered protocol family 1
[ 13.020266] xen: registering gsi 19 triggering 0 polarity 1
[ 13.020291] xen: --> pirq=19 -> irq=19 (gsi=19)
[ 13.020580] xen: registering gsi 19 triggering 0 polarity 1
[ 13.020585] Already setup the GSI :19
[ 13.045232] xen: registering gsi 18 triggering 0 polarity 1
[ 13.045244] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 13.069317] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 13.069321] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 13.069380] Unpacking initramfs...
[ 13.462278] Freeing initrd memory: 19648K (ffff880002000000 - ffff880003330000)
[ 13.462342] Intel CQM monitoring enabled
[ 13.462343] Intel MBM enabled
[ 13.464654] futex hash table entries: 8192 (order: 7, 524288 bytes)
[ 13.464836] audit: initializing netlink subsys (disabled)
[ 13.464859] audit: type=2000 audit(1485059010.012:1): initialized
[ 13.465180] Initialise system trusted keyrings
[ 13.465530] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 13.465542] zbud: loaded
[ 13.508193] Key type asymmetric registered
[ 13.508195] Asymmetric key parser 'x509' registered
[ 13.508287] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 13.508431] io scheduler noop registered
[ 13.508432] io scheduler deadline registered
[ 13.508438] io scheduler cfq registered (default)
[ 13.508776] xen: registering gsi 26 triggering 0 polarity 1
[ 13.508801] xen: --> pirq=26 -> irq=26 (gsi=26)
[ 13.509107] xen: registering gsi 32 triggering 0 polarity 1
[ 13.509120] xen: --> pirq=32 -> irq=32 (gsi=32)
[ 13.509366] xen: registering gsi 40 triggering 0 polarity 1
[ 13.509376] xen: --> pirq=40 -> irq=40 (gsi=40)
[ 13.509626] xen: registering gsi 16 triggering 0 polarity 1
[ 13.509636] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 13.509940] xen: registering gsi 16 triggering 0 polarity 1
[ 13.509944] Already setup the GSI :16
[ 13.510216] xen: registering gsi 17 triggering 0 polarity 1
[ 13.510226] xen: --> pirq=17 -> irq=17 (gsi=17)
[ 13.510500] aer 0000:00:01.0:pcie002: service driver aer loaded
[ 13.510544] aer 0000:00:02.0:pcie002: service driver aer loaded
[ 13.510586] aer 0000:00:03.0:pcie002: service driver aer loaded
[ 13.510606] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 13.510611] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
[ 13.510625] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 13.510627] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 13.510628] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[ 13.510634] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded
[ 13.510650] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[ 13.510656] pcie_pme 0000:00:03.0:pcie001: service driver pcie_pme loaded
[ 13.510696] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 13.510711] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 13.510749] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 13.510750] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 13.510764] pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded
[ 13.510803] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 13.510804] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 13.510819] pcie_pme 0000:00:1c.5:pcie001: service driver pcie_pme loaded
[ 13.510830] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.510853] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 13.510973] pciehp 0000:00:1c.0:pcie004: service driver pciehp loaded
[ 13.510978] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 13.510992] intel_idle: MWAIT substates: 0x2120
[ 13.510993] intel_idle: v0.4.1 model 0x4F
[ 13.511006] intel_idle: intel_idle yielding to none
[ 13.511098] Monitor-Mwait will be used to enter C-1 state
[ 13.511119] Monitor-Mwait will be used to enter C-2 state
[ 13.523587] Warning: Processor Platform Limit not supported.
[ 13.523797] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 13.523799] pstore: using zlib compression
[ 13.523802] pstore: Registered erst as persistent store backend
[ 13.524183] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[ 13.524732] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 13.545554] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 13.566423] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 13.566886] hpet_acpi_add: no address or irqs in _CRS
[ 13.566929] Linux agpgart interface v0.103
[ 13.567108] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 13.567109] AMD IOMMUv2 functionality not available on this system
[ 13.570358] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 13.573188] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 13.573193] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 13.573380] mousedev: PS/2 mouse device common for all mice
[ 13.573455] rtc_cmos 00:00: RTC can wake from S4
[ 13.573684] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 13.573757] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram
[ 13.574809] ledtrig-cpu: registered to indicate activity on CPUs
[ 13.576164] NET: Registered protocol family 10
[ 13.576672] mip6: Mobile IPv6
[ 13.576674] NET: Registered protocol family 17
[ 13.576676] mpls_gso: MPLS GSO support
[ 13.577537] mce: Unable to init device /dev/mcelog (rc: -16)
[ 13.577631] microcode: sig=0x406f1, pf=0x1, revision=0xb000017
[ 13.578205] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 13.578347] registered taskstats version 1
[ 13.578349] Loading compiled-in X.509 certificates
[ 13.581820] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 13.582106] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 13.582161] zswap: loaded using pool lzo/zbud
[ 13.584201] rtc_cmos 00:00: setting system clock to 2017-01-22 04:23:30 UTC (1485059010)
[ 13.584249] PM: Hibernation image not present or could not be loaded.
[ 13.584925] Freeing unused kernel memory: 1360K (ffffffff81b1b000 - ffffffff81c6f000)
[ 13.584926] Write protecting the kernel read-only data: 10240k
[ 13.587636] Freeing unused kernel memory: 60K (ffff8800015f1000 - ffff880001600000)
[ 13.588376] Freeing unused kernel memory: 1288K (ffff8800018be000 - ffff880001a00000)
[ 13.588381] ------------[ cut here ]------------
[ 13.588386] WARNING: CPU: 18 PID: 1 at /build/linux-zDY19G/linux-4.8.15/arch/x86/mm/dump_pagetables.c:225 note_page+0x5e8/0x790
[ 13.588388] x86/mm: Found insecure W+X mapping at address ffff880000000000/0xffff880000000000
[ 13.588388] Modules linked in:
[ 13.588392] CPU: 18 PID: 1 Comm: swapper/0 Not tainted 4.8.0-2-amd64 #1 Debian 4.8.15-2
[ 13.588392] Hardware name: ASUSTeK COMPUTER INC. Z10PA-D8 Series/Z10PA-D8 Series, BIOS 3202 04/18/2016
[ 13.588394] 0000000000000200 00000000043f1514 ffffffff8131f925 ffff8802806b3de0
[ 13.588397] 0000000000000000 ffffffff81074ffe ffff8802806b3ed0 ffff8802806b3e38
[ 13.588399] 0000000000000004 0000000000000000 ffff8802806b3ed0 0000000000000000
[ 13.588401] Call Trace:
[ 13.588406] [<ffffffff8131f925>] ? dump_stack+0x5c/0x77
[ 13.588409] [<ffffffff81074ffe>] ? __warn+0xbe/0xe0
[ 13.588412] [<ffffffff8107507f>] ? warn_slowpath_fmt+0x5f/0x80
[ 13.588415] [<ffffffff810cadc9>] ? vprintk_emit+0x349/0x530
[ 13.588417] [<ffffffff81067198>] ? note_page+0x5e8/0x790
[ 13.588419] [<ffffffff81067615>] ? ptdump_walk_pgd_level_core+0x2d5/0x400
[ 13.588423] [<ffffffff815dbd46>] ? kernel_init+0x26/0x100
[ 13.588425] [<ffffffff815e8eef>] ? ret_from_fork+0x1f/0x40
[ 13.588427] [<ffffffff815dbd20>] ? rest_init+0x80/0x80
[ 13.588428] ---[ end trace 98efce8be234f5b3 ]---
[ 13.608867] x86/mm: Checked W+X mappings: FAILED, 4602 W+X pages found.
[ 13.753840] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 13.764331] random: crng init done
[ 13.780980] pps_core: LinuxPPS API ver. 1 registered
[ 13.780981] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 13.781929] xen: registering gsi 18 triggering 0 polarity 1
[ 13.781944] Already setup the GSI :18
[ 13.782087] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 13.782348] PTP clock support registered
[ 13.783466] dca service started, version 1.12.1
[ 13.785324] SCSI subsystem initialized
[ 13.786673] ACPI: bus type USB registered
[ 13.786696] usbcore: registered new interface driver usbfs
[ 13.786705] usbcore: registered new interface driver hub
[ 13.786882] usbcore: registered new device driver usb
[ 13.789762] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 13.789928] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[ 13.789929] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 13.790104] xen: registering gsi 16 triggering 0 polarity 1
[ 13.790125] Already setup the GSI :16
[ 13.791256] igb 0000:05:00.0: PHY reset is blocked due to SOL/IDER session.
[ 13.791743] ehci-pci: EHCI PCI platform driver
[ 13.791869] xen: registering gsi 19 triggering 0 polarity 1
[ 13.791876] Already setup the GSI :19
[ 13.791984] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 13.791990] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 13.792015] ehci-pci 0000:00:1a.0: debug port 2
[ 13.792033] libata version 3.00 loaded.
[ 13.796009] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 13.796079] ehci-pci 0000:00:1a.0: irq 19, io mem 0xc7f14000
[ 13.808747] AVX2 version of gcm_enc/dec engaged.
[ 13.808748] AES CTR mode by8 optimization enabled
[ 13.809086] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 13.809320] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 13.809322] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.809326] usb usb1: Product: EHCI Host Controller
[ 13.809328] usb usb1: Manufacturer: Linux 4.8.0-2-amd64 ehci_hcd
[ 13.809329] usb usb1: SerialNumber: 0000:00:1a.0
[ 13.809551] hub 1-0:1.0: USB hub found
[ 13.809569] hub 1-0:1.0: 2 ports detected
[ 13.809974] xen: registering gsi 18 triggering 0 polarity 1
[ 13.809983] Already setup the GSI :18
[ 13.810061] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 13.810066] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 13.810092] ehci-pci 0000:00:1d.0: debug port 2
[ 13.814028] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 13.814034] ehci-pci 0000:00:1d.0: irq 18, io mem 0xc7f13000
[ 13.815507] pps pps0: new PPS source ptp0
[ 13.815509] igb 0000:05:00.0: added PHC on eth0
[ 13.815510] igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 13.815512] igb 0000:05:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 34:97:f6:5c:0a:1f
[ 13.815578] igb 0000:05:00.0: eth0: PBA No: 001300-000
[ 13.815579] igb 0000:05:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 13.815694] xen: registering gsi 17 triggering 0 polarity 1
[ 13.815711] Already setup the GSI :17
[ 13.833115] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 13.833378] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 13.833381] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.833383] usb usb2: Product: EHCI Host Controller
[ 13.833385] usb usb2: Manufacturer: Linux 4.8.0-2-amd64 ehci_hcd
[ 13.833386] usb usb2: SerialNumber: 0000:00:1d.0
[ 13.833603] hub 2-0:1.0: USB hub found
[ 13.833648] hub 2-0:1.0: 2 ports detected
[ 13.834211] xen: registering gsi 19 triggering 0 polarity 1
[ 13.834223] Already setup the GSI :19
[ 13.834292] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 13.834299] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 13.835409] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 13.835429] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 13.835849] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 13.835851] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.835852] usb usb3: Product: xHCI Host Controller
[ 13.835853] usb usb3: Manufacturer: Linux 4.8.0-2-amd64 xhci-hcd
[ 13.835854] usb usb3: SerialNumber: 0000:00:14.0
[ 13.836071] hub 3-0:1.0: USB hub found
[ 13.836131] hub 3-0:1.0: 15 ports detected
[ 13.839224] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 13.839230] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 13.839285] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 13.839286] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.839287] usb usb4: Product: xHCI Host Controller
[ 13.839288] usb usb4: Manufacturer: Linux 4.8.0-2-amd64 xhci-hcd
[ 13.839290] usb usb4: SerialNumber: 0000:00:14.0
[ 13.839450] hub 4-0:1.0: USB hub found
[ 13.839477] hub 4-0:1.0: 6 ports detected
[ 13.840988] ahci 0000:00:11.4: version 3.0
[ 13.841126] xen: registering gsi 16 triggering 0 polarity 1
[ 13.841132] Already setup the GSI :16
[ 13.841358] ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 13.841363] ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst
[ 13.845688] pps pps1: new PPS source ptp1
[ 13.845690] igb 0000:06:00.0: added PHC on eth1
[ 13.845691] igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 13.845693] igb 0000:06:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 34:97:f6:5c:0a:20
[ 13.845752] igb 0000:06:00.0: eth1: PBA No: 001300-000
[ 13.845754] igb 0000:06:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 13.846877] igb 0000:06:00.0 eth2: renamed from eth1
[ 13.881503] igb 0000:05:00.0 eth1: renamed from eth0
[ 13.881752] scsi host0: ahci
[ 13.881905] scsi host1: ahci
[ 13.882025] scsi host2: ahci
[ 13.882125] scsi host3: ahci
[ 13.882186] ata1: SATA max UDMA/133 abar m2048@0xc7f18000 port 0xc7f18100 irq 317
[ 13.882188] ata2: SATA max UDMA/133 abar m2048@0xc7f18000 port 0xc7f18180 irq 317
[ 13.882189] ata3: SATA max UDMA/133 abar m2048@0xc7f18000 port 0xc7f18200 irq 317
[ 13.882191] ata4: SATA max UDMA/133 abar m2048@0xc7f18000 port 0xc7f18280 irq 317
[ 13.882300] xen: registering gsi 19 triggering 0 polarity 1
[ 13.882306] Already setup the GSI :19
[ 13.882504] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 13.882506] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 13.941810] scsi host4: ahci
[ 13.941968] scsi host5: ahci
[ 13.942077] scsi host6: ahci
[ 13.942183] scsi host7: ahci
[ 13.942331] scsi host8: ahci
[ 13.942446] scsi host9: ahci
[ 13.942502] ata5: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12100 irq 318
[ 13.942503] ata6: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12180 irq 318
[ 13.942505] ata7: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12200 irq 318
[ 13.942506] ata8: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12280 irq 318
[ 13.942507] ata9: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12300 irq 318
[ 13.942509] ata10: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12380 irq 318
[ 14.137132] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 14.161124] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 14.165103] usb 3-4: new full-speed USB device number 2 using xhci_hcd
[ 14.196691] ata3: SATA link down (SStatus 0 SControl 300)
[ 14.196720] ata4: SATA link down (SStatus 0 SControl 300)
[ 14.196760] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 14.196810] ata2: SATA link down (SStatus 0 SControl 300)
[ 14.200245] ata1.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max UDMA/133
[ 14.200247] ata1.00: 145226112 sectors, multi 16: LBA48
[ 14.204763] ata1.00: configured for UDMA/133
[ 14.205180] scsi 0:0:0:0: Direct-Access ATA WDC WD740GD-00FL 8F33 PQ: 0 ANSI: 5
[ 14.256544] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 14.256560] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 14.256575] ata10: SATA link down (SStatus 0 SControl 300)
[ 14.256591] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 14.256607] ata9: SATA link down (SStatus 0 SControl 300)
[ 14.256624] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 14.257237] ata5.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 14.257239] ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 14.257269] ata7.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 14.257270] ata7.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 14.257277] ata6.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 14.257279] ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 14.257286] ata8.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 14.257287] ata8.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 14.257871] ata5.00: configured for UDMA/133
[ 14.257883] ata6.00: configured for UDMA/133
[ 14.257914] ata7.00: configured for UDMA/133
[ 14.257921] ata8.00: configured for UDMA/133
[ 14.258415] scsi 4:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
[ 14.285558] usb 1-1: New USB device found, idVendor=8087, idProduct=800a
[ 14.285561] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 14.286273] hub 1-1:1.0: USB hub found
[ 14.286540] hub 1-1:1.0: 6 ports detected
[ 14.301728] scsi 5:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
[ 14.307683] usb 3-4: New USB device found, idVendor=046d, idProduct=c52b
[ 14.307685] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 14.307686] usb 3-4: Product: USB Receiver
[ 14.307687] usb 3-4: Manufacturer: Logitech
[ 14.309535] usb 2-1: New USB device found, idVendor=8087, idProduct=8002
[ 14.309537] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 14.309813] hub 2-1:1.0: USB hub found
[ 14.309897] hub 2-1:1.0: 8 ports detected
[ 14.312190] hidraw: raw HID events driver (C) Jiri Kosina
[ 14.315607] sd 4:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 14.315608] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[ 14.315617] sd 0:0:0:0: [sda] 145226112 512-byte logical blocks: (74.4 GB/69.2 GiB)
[ 14.315634] sd 4:0:0:0: [sdb] Write Protect is off
[ 14.315636] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 14.315646] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.315754] sd 0:0:0:0: [sda] Write Protect is off
[ 14.315756] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 14.315793] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.317627] usbcore: registered new interface driver usbhid
[ 14.317628] usbhid: USB HID core driver
[ 14.320129] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2
[ 14.332510] sda: sda1 sda2 < sda5 >
[ 14.333302] sd 0:0:0:0: [sda] Attached SCSI disk
[ 14.357701] sdb: sdb1
[ 14.358095] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 14.369349] sd 5:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 14.369351] sd 5:0:0:0: [sdc] 4096-byte physical blocks
[ 14.369376] sd 5:0:0:0: [sdc] Write Protect is off
[ 14.369377] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 14.369388] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.369824] scsi 6:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
[ 14.409492] sd 6:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 14.409494] sd 6:0:0:0: [sdd] 4096-byte physical blocks
[ 14.409696] sd 6:0:0:0: [sdd] Write Protect is off
[ 14.409698] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 14.409771] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.409869] scsi 7:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
[ 14.418736] sdc: sdc1
[ 14.419009] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 14.445229] input: Logitech K520 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:2011.0005/input/input3
[ 14.445510] logitech-hidpp-device 0003:046D:2011.0005: input,hidraw1: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:00:14.0-4:2
[ 14.453821] sdd: sdd1
[ 14.454701] sd 6:0:0:0: [sdd] Attached SCSI disk
[ 14.457392] sd 7:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 14.457394] sd 7:0:0:0: [sde] 4096-byte physical blocks
[ 14.457571] sd 7:0:0:0: [sde] Write Protect is off
[ 14.457573] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 14.457626] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.477107] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e33526e660, max_idle_ns: 440795262305 ns
[ 14.498786] sde: sde1
[ 14.499537] sd 7:0:0:0: [sde] Attached SCSI disk
[ 14.607759] md: bind<sdc1>
[ 14.645568] md: bind<sdd1>
[ 14.649578] md: raid1 personality registered for level 1
[ 14.650426] md/raid1:md127: active with 2 out of 2 mirrors
[ 14.650541] created bitmap (22 pages) for device md127
[ 14.651069] md127: bitmap initialized from disk: read 2 pages, set 0 of 44709 bits
[ 14.674595] md: bind<sde1>
[ 14.693118] md: bind<sdb1>
[ 14.695837] md/raid1:md0: active with 2 out of 2 mirrors
[ 14.695959] created bitmap (22 pages) for device md0
[ 14.696496] md0: bitmap initialized from disk: read 2 pages, set 0 of 44709 bits
[ 14.715104] md127: detected capacity change from 0 to 3000312528896
[ 14.772815] md0: detected capacity change from 0 to 3000312528896
[ 14.965708] device-mapper: uevent: version 1.0.3
[ 14.965862] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 15.520082] clocksource: Switched to clocksource tsc
[ 19.471187] input: Logitech M310/M310t as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:4031.0004/input/input4
[ 19.471393] logitech-hidpp-device 0003:046D:4031.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech M310/M310t] on usb-0000:00:14.0-4:1
[ 19.482321] md: linear personality registered for level -1
[ 19.486694] md: multipath personality registered for level -4
[ 19.490898] md: raid0 personality registered for level 0
[ 19.565074] raid6: sse2x1 gen() 6871 MB/s
[ 19.633072] raid6: sse2x1 xor() 4867 MB/s
[ 19.701071] raid6: sse2x2 gen() 8326 MB/s
[ 19.769070] raid6: sse2x2 xor() 5591 MB/s
[ 19.837087] raid6: sse2x4 gen() 9830 MB/s
[ 19.905072] raid6: sse2x4 xor() 6813 MB/s
[ 19.973070] raid6: avx2x1 gen() 13374 MB/s
[ 20.041083] raid6: avx2x2 gen() 15411 MB/s
[ 20.109084] raid6: avx2x4 gen() 17789 MB/s
[ 20.109085] raid6: using algorithm avx2x4 gen() 17789 MB/s
[ 20.109086] raid6: using avx2x2 recovery algorithm
[ 20.110180] xor: automatically using best checksumming function:
[ 20.149069] avx : 21131.000 MB/sec
[ 20.150172] async_tx: api initialized (async)
[ 20.157324] md: raid6 personality registered for level 6
[ 20.157324] md: raid5 personality registered for level 5
[ 20.157325] md: raid4 personality registered for level 4
[ 20.168086] md: raid10 personality registered for level 10
[ 20.224340] PM: Starting manual resume from disk
[ 20.224344] PM: Hibernation image partition 253:5 present
[ 20.224344] PM: Looking for hibernation image.
[ 20.224477] PM: Image not found (code -22)
[ 20.224478] PM: Hibernation image not present or could not be loaded.
[ 20.370065] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 22.261884] Error: Driver 'processor_aggregator' is already registered, aborting...
[ 22.347415] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 22.377709] power_meter ACPI000D:00: Found ACPI power meter.
[ 22.377736] power_meter ACPI000D:00: Ignoring unsafe software power cap!
[ 22.378315] wmi: Mapper loaded
[ 22.378373] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 22.378378] ACPI: Power Button [PWRB]
[ 22.378441] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 22.378445] ACPI: Power Button [PWRF]
[ 22.662128] ipmi message handler version 39.2
[ 22.664107] Error: Driver 'processor_aggregator' is already registered, aborting...
[ 22.678464] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 22.806607] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 22.806608] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 22.806609] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 22.806610] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 22.806610] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 22.892204] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.892259] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 22.892305] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 22.892345] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 22.892385] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 22.945635] ipmi_si IPI0001:00: ipmi_si: probing via ACPI
[ 22.945656] ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0
[ 22.945657] ipmi_si: Adding ACPI-specified kcs state machine
[ 22.945678] IPMI System Interface driver.
[ 22.945714] ipmi_si: probing via SMBIOS
[ 22.945715] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 22.945716] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
[ 22.945718] ipmi_si: probing via SPMI
[ 22.945719] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
[ 22.945720] ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
[ 22.945722] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 23.162745] iTCO_vendor_support: vendor-support=0
[ 23.302887] ipmi_si IPI0001:00: Found new BMC (man_id: 0x000a3f, prod_id: 0x0e73, dev_id: 0x20)
[ 23.302894] ipmi_si IPI0001:00: IPMI kcs interface initialized
[ 23.465955] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 23.466000] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 23.479093] mei_me 0000:00:16.0: Device doesn't have valid ME Interface
[ 23.585343] xen: registering gsi 36 triggering 0 polarity 1
[ 23.585376] xen: --> pirq=36 -> irq=36 (gsi=36)
[ 23.585449] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
[ 23.585451] snd_hda_intel 0000:02:00.1: Force to non-snoop mode
[ 23.600088] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input8
[ 23.600210] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input9
[ 23.600317] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input10
[ 23.600413] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input11
[ 23.600476] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input12
[ 23.731487] EDAC MC: Ver: 3.0.0
[ 23.792830] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 23.792852] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 23.792875] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 23.792890] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 23.792899] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 23.792908] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 23.792913] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 23.792920] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 23.792930] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 23.792935] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 23.792943] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 23.792949] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 23.792957] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 23.792961] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 23.792967] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 23.792975] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 23.792979] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 23.792985] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 23.792993] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 23.792997] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 23.793003] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 23.793011] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 23.793014] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 23.793022] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 23.793034] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 23.793051] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 23.793059] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 23.793069] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 23.793073] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 23.793082] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 23.793092] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 23.793096] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 23.793106] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 23.793116] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 23.793120] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 23.793130] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 23.793141] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 23.793152] EDAC sbridge: Seeking for: PCI ID 8086:6f6c
[ 23.793163] EDAC sbridge: Seeking for: PCI ID 8086:6f6d
[ 23.793494] EDAC MC0: Giving out device to module sbridge_edac.c controller Broadwell Socket#0: DEV 0000:ff:12.0 (INTERRUPT)
[ 23.793697] EDAC MC1: Giving out device to module sbridge_edac.c controller Broadwell Socket#1: DEV 0000:7f:12.0 (INTERRUPT)
[ 23.793698] EDAC sbridge: Ver: 1.1.1
[ 23.862210] intel_rapl: Found RAPL domain package
[ 23.862218] intel_rapl: Found RAPL domain dram
[ 23.862219] intel_rapl: DRAM domain energy unit 15300pj
[ 23.862238] intel_rapl: Found RAPL domain package
[ 23.862260] intel_rapl: Found RAPL domain dram
[ 23.862261] intel_rapl: DRAM domain energy unit 15300pj
[ 25.429351] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 25.713450] Adding 4247548k swap on /dev/mapper/vgsys-lvswap. Priority:-1 extents:1 across:4247548k FS
[ 26.202127] lp: driver loaded but no devices found
[ 26.238488] ppdev: user-space parallel port driver
[ 26.256906] parport_pc parport_pc.956: Unable to set coherent dma mask: disabling DMA
[ 26.257121] parport_pc parport_pc.888: Unable to set coherent dma mask: disabling DMA
[ 26.257303] parport_pc parport_pc.632: Unable to set coherent dma mask: disabling DMA
[ 26.299601] loop: module loaded
[ 26.340591] pciback 0000:02:00.0: seizing device
[ 26.340745] xen: registering gsi 32 triggering 0 polarity 1
[ 26.340762] Already setup the GSI :32
[ 26.340980] xen_pciback: backend is vpci
[ 26.364029] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 26.438816] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 27.067763] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 27.072864] xenbr0: port 1(eth1) entered blocking state
[ 27.072865] xenbr0: port 1(eth1) entered disabled state
[ 27.072950] device eth1 entered promiscuous mode
[ 27.116221] igb 0000:05:00.0 eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 27.119015] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready
[ 28.077169] xenbr0: port 1(eth1) entered blocking state
[ 28.077171] xenbr0: port 1(eth1) entered forwarding state
[ 28.077348] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready
[ 35.728968] RPC: Registered named UNIX socket transport module.
[ 35.728969] RPC: Registered udp transport module.
[ 35.728970] RPC: Registered tcp transport module.
[ 35.728971] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 35.759126] FS-Cache: Loaded
[ 35.800875] FS-Cache: Netfs 'nfs' registered for caching
[ 35.839267] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 40.913401] xen:xen_evtchn: Event-channel device installed
[-- Attachment #1.1.3: cknowsvr01-dmesg-without-xen.txt --]
[-- Type: text/plain, Size: 76109 bytes --]
root@cknowsvr01:/home/diederik# dmesg
[ 0.000000] Linux version 4.8.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.1 20161202 (Debian 5.4.1-4) ) #1 SMP Debian 4.8.15-2 (2017-01-04)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-2-amd64 root=UUID=0e49acdd-69d2-4c95-a5fc-3e1f4daa9b65 ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000079cfbfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000079cfc000-0x000000007b8c1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007b8c2000-0x000000007b934fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007b935000-0x000000007bedffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007bee0000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000207fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. Z10PA-D8 Series/Z10PA-D8 Series, BIOS 3202 04/18/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x2080000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000080000000 mask 3FFF80000000 uncachable
[ 0.000000] 1 base 038000000000 mask 3F8000000000 uncachable
[ 0.000000] 2 base 0000B0000000 mask 3FFFF0000000 write-through
[ 0.000000] 3 base 0000C0000000 mask 3FFFFFE00000 write-through
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] x2apic: enabled by BIOS, switching to x2apic ops
[ 0.000000] e820: last_pfn = 0x79cfc max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fdba0-0x000fdbaf] mapped at [ffff9b16400fdba0]
[ 0.000000] Base memory trampoline at [ffff9b1640098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x1ae533f000, 0x1ae533ffff] PGTABLE
[ 0.000000] BRK [0x1ae5340000, 0x1ae5340fff] PGTABLE
[ 0.000000] BRK [0x1ae5341000, 0x1ae5341fff] PGTABLE
[ 0.000000] BRK [0x1ae5342000, 0x1ae5342fff] PGTABLE
[ 0.000000] BRK [0x1ae5343000, 0x1ae5343fff] PGTABLE
[ 0.000000] BRK [0x1ae5344000, 0x1ae5344fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3598f000-0x36cbefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0580 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000007B8EA0B0 0000D4 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007B919410 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000007B8EA218 02F1F7 (v02 ALASKA A M I 01072009 INTL 20091013)
[ 0.000000] ACPI: FACS 0x000000007BEDEF80 000040
[ 0.000000] ACPI: APIC 0x000000007B919520 000224 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007B919748 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000007B919790 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000007B919830 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: EINJ 0x000000007B9347D0 000130 (v01 ALASKA A M I 00000001 INTL 00000001)
[ 0.000000] ACPI: UEFI 0x000000007B9198C8 000042 (v01 ALASKA A M I 01072009 00000000)
[ 0.000000] ACPI: HPET 0x000000007B919910 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
[ 0.000000] ACPI: MSCT 0x000000007B919948 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
[ 0.000000] ACPI: SLIT 0x000000007B9199D8 000030 (v01 ALASKA A M I 00000001 INTL 20091013)
[ 0.000000] ACPI: SRAT 0x000000007B919A08 001158 (v03 ALASKA A M I 00000001 INTL 20091013)
[ 0.000000] ACPI: WDDT 0x000000007B91AB60 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
[ 0.000000] ACPI: SSDT 0x000000007B91ABA0 016FB3 (v02 ALASKA PmMgt 00000001 INTL 20120913)
[ 0.000000] ACPI: NITR 0x000000007B931B58 000071 (v02 ALASKA A M I 00000001 INTL 20091013)
[ 0.000000] ACPI: SPMI 0x000000007B931BD0 000041 (v05 ALASKA A M I 00000000 AMI. 00000000)
[ 0.000000] ACPI: SSDT 0x000000007B931C18 002652 (v02 ALASKA SpsNm 00000002 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000007B934270 000064 (v02 ALASKA SpsNvs 00000002 INTL 20120913)
[ 0.000000] ACPI: PRAD 0x000000007B9342D8 000102 (v02 ALASKA A M I 00000002 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x000000007B9343E0 0000E8 (v01 ALASKA A M I 00000001 INTL 20091013)
[ 0.000000] ACPI: HEST 0x000000007B9344C8 0000A8 (v01 ALASKA A M I 00000001 INTL 00000001)
[ 0.000000] ACPI: BERT 0x000000007B934570 000030 (v01 ALASKA A M I 00000001 INTL 00000001)
[ 0.000000] ACPI: ERST 0x000000007B9345A0 000230 (v01 ALASKA A M I 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Setting APIC routing to cluster x2apic.
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x06 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x08 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0a -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0c -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0e -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x10 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x14 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x16 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x18 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x1a -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x1c -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x1e -> Node 1
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x07 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x09 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0b -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0d -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0f -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x11 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x13 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x15 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x17 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x19 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x1b -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x1d -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x1f -> Node 1
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x107fffffff]
[ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x1080000000-0x207fffffff]
[ 0.000000] NUMA: Initialized distance table, cnt=2
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x107fffffff] -> [mem 0x00000000-0x107fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x107fffb000-0x107fffffff]
[ 0.000000] NODE_DATA(1) allocated [mem 0x207fffa000-0x207fffefff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000207fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000079cfbfff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000107fffffff]
[ 0.000000] node 1: [mem 0x0000001080000000-0x000000207fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000107fffffff]
[ 0.000000] On node 0 totalpages: 16751769
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7732 pages used for memmap
[ 0.000000] DMA32 zone: 494844 pages, LIFO batch:31
[ 0.000000] Normal zone: 253952 pages used for memmap
[ 0.000000] Normal zone: 16252928 pages, LIFO batch:31
[ 0.000000] Initmem setup node 1 [mem 0x0000001080000000-0x000000207fffffff]
[ 0.000000] On node 1 totalpages: 16777216
[ 0.000000] Normal zone: 262144 pages used for memmap
[ 0.000000] Normal zone: 16777216 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
[ 0.000000] IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 32 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79cfc000-0x7b8c1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b8c2000-0x7b934fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b935000-0x7bedffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7bee0000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:32 nr_node_ids:2
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff9b267fa00000 s103384 r8192 d31784 u262144
[ 0.000000] pcpu-alloc: s103384 r8192 d31784 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 16 17 18 19 20 21 22 23
[ 0.000000] pcpu-alloc: [1] 08 09 10 11 12 13 14 15 [1] 24 25 26 27 28 29 30 31
[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 33005072
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-2-amd64 root=UUID=0e49acdd-69d2-4c95-a5fc-3e1f4daa9b65 ro quiet
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 126976 bytes
[ 0.000000] log_buf_len min size: 131072 bytes
[ 0.000000] log_buf_len: 262144 bytes
[ 0.000000] early log buf free: 116060(88%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 131914220K/134115940K available (6070K kernel code, 1124K rwdata, 2808K rodata, 1360K init, 800K bss, 2201720K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=32.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=32
[ 0.000000] NR_IRQS:33024 nr_irqs:1496 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2095.297 MHz processor
[ 0.000033] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.59 BogoMIPS (lpj=8381188)
[ 0.000035] pid_max: default: 32768 minimum: 301
[ 0.000076] ACPI: Core revision 20160422
[ 0.070819] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.070940] Security Framework initialized
[ 0.070941] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.070947] AppArmor: AppArmor disabled by boot time parameter
[ 0.077514] Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
[ 0.103465] Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
[ 0.114964] Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.115079] Mountpoint-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.116139] CPU: Physical Processor ID: 0
[ 0.116140] CPU: Processor Core ID: 0
[ 0.116145] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.116145] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.116150] mce: CPU supports 22 MCE banks
[ 0.116167] CPU0: Thermal monitoring enabled (TM1)
[ 0.116213] process: using mwait in idle threads
[ 0.116217] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.116218] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.117155] Freeing SMP alternatives memory: 24K (ffffffff8aa6f000 - ffffffff8aa75000)
[ 0.119201] ftrace: allocating 24736 entries in 97 pages
[ 0.131451] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.131452] smpboot: APIC(10) Converting physical 1 to logical package 1
[ 0.131454] smpboot: Max logical packages: 4
[ 0.131462] DMAR: Host address width 46
[ 0.131463] DMAR: DRHD base: 0x000000fbffc000 flags: 0x0
[ 0.131473] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
[ 0.131474] DMAR: DRHD base: 0x000000c7ffc000 flags: 0x1
[ 0.131479] DMAR: dmar1: reg_base_addr c7ffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
[ 0.131480] DMAR: RMRR base: 0x0000007db86000 end: 0x0000007db95fff
[ 0.131481] DMAR: ATSR flags: 0x0
[ 0.131482] DMAR: RHSA base: 0x000000c7ffc000 proximity domain: 0x0
[ 0.131483] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x1
[ 0.131485] DMAR-IR: IOAPIC id 3 under DRHD base 0xfbffc000 IOMMU 0
[ 0.131486] DMAR-IR: IOAPIC id 1 under DRHD base 0xc7ffc000 IOMMU 1
[ 0.131487] DMAR-IR: IOAPIC id 2 under DRHD base 0xc7ffc000 IOMMU 1
[ 0.131487] DMAR-IR: HPET id 0 under DRHD base 0xc7ffc000
[ 0.131489] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.132319] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.133000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.172697] TSC deadline timer enabled
[ 0.172703] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz (family: 0x6, model: 0x4f, stepping: 0x1)
[ 0.172707] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.172734] ... version: 3
[ 0.172735] ... bit width: 48
[ 0.172735] ... generic registers: 4
[ 0.172736] ... value mask: 0000ffffffffffff
[ 0.172736] ... max period: 00007fffffffffff
[ 0.172737] ... fixed-purpose events: 3
[ 0.172737] ... event mask: 000000070000000f
[ 0.174604] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.174731] x86: Booting SMP configuration:
[ 0.174732] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.735172] .... node #1, CPUs: #8 #9 #10 #11 #12 #13 #14 #15
[ 1.395526] .... node #0, CPUs: #16 #17 #18 #19 #20 #21 #22 #23
[ 2.035969] .... node #1, CPUs: #24 #25 #26 #27 #28 #29 #30 #31
[ 2.676232] x86: Booted up 2 nodes, 32 CPUs
[ 2.676234] smpboot: Total of 32 processors activated (134172.29 BogoMIPS)
[ 2.744263] devtmpfs: initialized
[ 2.744446] x86/mm: Memory block size: 2048MB
[ 2.747401] PM: Registering ACPI NVS region [mem 0x7b935000-0x7bedffff] (5943296 bytes)
[ 2.747741] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 2.747921] pinctrl core: initialized pinctrl subsystem
[ 2.749256] NET: Registered protocol family 16
[ 2.768882] cpuidle: using governor ladder
[ 2.804914] cpuidle: using governor menu
[ 2.805051] ACPI: bus type PCI registered
[ 2.805052] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 2.805186] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
[ 2.805188] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
[ 2.805205] PCI: Using configuration type 1 for base access
[ 2.853184] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 2.853185] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.853962] ACPI: Added _OSI(Module Device)
[ 2.853963] ACPI: Added _OSI(Processor Device)
[ 2.853964] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 2.853964] ACPI: Added _OSI(Processor Aggregator Device)
[ 2.871115] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 2.926429] ACPI: Dynamic OEM Table Load:
[ 2.926431] ACPI: PRAD 0x0000000000000000 000102 (v02 ALASKA A M I 00000002 INTL 20120913)
[ 2.963168] ACPI: Interpreter enabled
[ 2.963185] ACPI: (supports S0 S4 S5)
[ 2.963186] ACPI: Using IOAPIC for interrupt routing
[ 2.963277] HEST: Table parsing has been initialized.
[ 2.963279] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 3.019168] ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
[ 3.019172] acpi PNP0A03:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 3.022027] acpi PNP0A03:02: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 3.022084] PCI host bridge to bus 0000:ff
[ 3.022086] pci_bus 0000:ff: root bus resource [bus ff]
[ 3.022095] pci 0000:ff:08.0: [8086:6f80] type 00 class 0x088000
[ 3.022158] pci 0000:ff:08.2: [8086:6f32] type 00 class 0x110100
[ 3.022214] pci 0000:ff:08.3: [8086:6f83] type 00 class 0x088000
[ 3.022278] pci 0000:ff:09.0: [8086:6f90] type 00 class 0x088000
[ 3.022330] pci 0000:ff:09.2: [8086:6f33] type 00 class 0x110100
[ 3.022387] pci 0000:ff:09.3: [8086:6f93] type 00 class 0x088000
[ 3.022448] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000
[ 3.022498] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100
[ 3.022549] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100
[ 3.022598] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000
[ 3.022648] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000
[ 3.022697] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000
[ 3.022746] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000
[ 3.022794] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000
[ 3.022842] pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000
[ 3.022890] pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000
[ 3.022938] pci 0000:ff:0c.6: [8086:6fe6] type 00 class 0x088000
[ 3.022987] pci 0000:ff:0c.7: [8086:6fe7] type 00 class 0x088000
[ 3.023037] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000
[ 3.023087] pci 0000:ff:0f.1: [8086:6ff9] type 00 class 0x088000
[ 3.023137] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000
[ 3.023187] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000
[ 3.023237] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000
[ 3.023289] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000
[ 3.023342] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100
[ 3.023396] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000
[ 3.023444] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100
[ 3.023496] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000
[ 3.023546] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000
[ 3.023586] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100
[ 3.023642] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000
[ 3.023730] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000
[ 3.023813] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000
[ 3.023900] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000
[ 3.023987] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000
[ 3.024072] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000
[ 3.024139] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000
[ 3.024192] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000
[ 3.024247] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000
[ 3.024308] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000
[ 3.024368] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000
[ 3.024429] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000
[ 3.024487] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000
[ 3.024540] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000
[ 3.024592] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000
[ 3.024644] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000
[ 3.024697] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000
[ 3.024768] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000
[ 3.024832] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000
[ 3.024894] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000
[ 3.024962] pci 0000:ff:16.0: [8086:6f68] type 00 class 0x088000
[ 3.025023] pci 0000:ff:16.6: [8086:6f6e] type 00 class 0x088000
[ 3.025078] pci 0000:ff:16.7: [8086:6f6f] type 00 class 0x088000
[ 3.025130] pci 0000:ff:17.0: [8086:6fd0] type 00 class 0x088000
[ 3.025192] pci 0000:ff:17.4: [8086:6fb8] type 00 class 0x088000
[ 3.025243] pci 0000:ff:17.5: [8086:6fb9] type 00 class 0x088000
[ 3.025297] pci 0000:ff:17.6: [8086:6fba] type 00 class 0x088000
[ 3.025349] pci 0000:ff:17.7: [8086:6fbb] type 00 class 0x088000
[ 3.025410] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000
[ 3.025461] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000
[ 3.025513] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000
[ 3.025565] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000
[ 3.025605] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000
[ 3.025660] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000
[ 3.025713] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000
[ 3.025832] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
[ 3.025835] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 3.026969] acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 3.027022] PCI host bridge to bus 0000:7f
[ 3.027023] pci_bus 0000:7f: root bus resource [bus 7f]
[ 3.027032] pci 0000:7f:08.0: [8086:6f80] type 00 class 0x088000
[ 3.027090] pci 0000:7f:08.2: [8086:6f32] type 00 class 0x110100
[ 3.027152] pci 0000:7f:08.3: [8086:6f83] type 00 class 0x088000
[ 3.027221] pci 0000:7f:09.0: [8086:6f90] type 00 class 0x088000
[ 3.027277] pci 0000:7f:09.2: [8086:6f33] type 00 class 0x110100
[ 3.027336] pci 0000:7f:09.3: [8086:6f93] type 00 class 0x088000
[ 3.027403] pci 0000:7f:0b.0: [8086:6f81] type 00 class 0x088000
[ 3.027456] pci 0000:7f:0b.1: [8086:6f36] type 00 class 0x110100
[ 3.027510] pci 0000:7f:0b.2: [8086:6f37] type 00 class 0x110100
[ 3.027562] pci 0000:7f:0b.3: [8086:6f76] type 00 class 0x088000
[ 3.027617] pci 0000:7f:0c.0: [8086:6fe0] type 00 class 0x088000
[ 3.027670] pci 0000:7f:0c.1: [8086:6fe1] type 00 class 0x088000
[ 3.027722] pci 0000:7f:0c.2: [8086:6fe2] type 00 class 0x088000
[ 3.027779] pci 0000:7f:0c.3: [8086:6fe3] type 00 class 0x088000
[ 3.027830] pci 0000:7f:0c.4: [8086:6fe4] type 00 class 0x088000
[ 3.027882] pci 0000:7f:0c.5: [8086:6fe5] type 00 class 0x088000
[ 3.027934] pci 0000:7f:0c.6: [8086:6fe6] type 00 class 0x088000
[ 3.027985] pci 0000:7f:0c.7: [8086:6fe7] type 00 class 0x088000
[ 3.028039] pci 0000:7f:0f.0: [8086:6ff8] type 00 class 0x088000
[ 3.028090] pci 0000:7f:0f.1: [8086:6ff9] type 00 class 0x088000
[ 3.028144] pci 0000:7f:0f.4: [8086:6ffc] type 00 class 0x088000
[ 3.028197] pci 0000:7f:0f.5: [8086:6ffd] type 00 class 0x088000
[ 3.028250] pci 0000:7f:0f.6: [8086:6ffe] type 00 class 0x088000
[ 3.028304] pci 0000:7f:10.0: [8086:6f1d] type 00 class 0x088000
[ 3.028358] pci 0000:7f:10.1: [8086:6f34] type 00 class 0x110100
[ 3.028413] pci 0000:7f:10.5: [8086:6f1e] type 00 class 0x088000
[ 3.028466] pci 0000:7f:10.6: [8086:6f7d] type 00 class 0x110100
[ 3.028518] pci 0000:7f:10.7: [8086:6f1f] type 00 class 0x088000
[ 3.028571] pci 0000:7f:12.0: [8086:6fa0] type 00 class 0x088000
[ 3.028612] pci 0000:7f:12.1: [8086:6f30] type 00 class 0x110100
[ 3.028672] pci 0000:7f:13.0: [8086:6fa8] type 00 class 0x088000
[ 3.028751] pci 0000:7f:13.1: [8086:6f71] type 00 class 0x088000
[ 3.028814] pci 0000:7f:13.2: [8086:6faa] type 00 class 0x088000
[ 3.028878] pci 0000:7f:13.3: [8086:6fab] type 00 class 0x088000
[ 3.028943] pci 0000:7f:13.4: [8086:6fac] type 00 class 0x088000
[ 3.029006] pci 0000:7f:13.5: [8086:6fad] type 00 class 0x088000
[ 3.029068] pci 0000:7f:13.6: [8086:6fae] type 00 class 0x088000
[ 3.029127] pci 0000:7f:13.7: [8086:6faf] type 00 class 0x088000
[ 3.029184] pci 0000:7f:14.0: [8086:6fb0] type 00 class 0x088000
[ 3.029249] pci 0000:7f:14.1: [8086:6fb1] type 00 class 0x088000
[ 3.029314] pci 0000:7f:14.2: [8086:6fb2] type 00 class 0x088000
[ 3.029379] pci 0000:7f:14.3: [8086:6fb3] type 00 class 0x088000
[ 3.029442] pci 0000:7f:14.4: [8086:6fbc] type 00 class 0x088000
[ 3.029499] pci 0000:7f:14.5: [8086:6fbd] type 00 class 0x088000
[ 3.029557] pci 0000:7f:14.6: [8086:6fbe] type 00 class 0x088000
[ 3.029613] pci 0000:7f:14.7: [8086:6fbf] type 00 class 0x088000
[ 3.029670] pci 0000:7f:15.0: [8086:6fb4] type 00 class 0x088000
[ 3.029735] pci 0000:7f:15.1: [8086:6fb5] type 00 class 0x088000
[ 3.029801] pci 0000:7f:15.2: [8086:6fb6] type 00 class 0x088000
[ 3.029866] pci 0000:7f:15.3: [8086:6fb7] type 00 class 0x088000
[ 3.029936] pci 0000:7f:16.0: [8086:6f68] type 00 class 0x088000
[ 3.030002] pci 0000:7f:16.6: [8086:6f6e] type 00 class 0x088000
[ 3.030058] pci 0000:7f:16.7: [8086:6f6f] type 00 class 0x088000
[ 3.030115] pci 0000:7f:17.0: [8086:6fd0] type 00 class 0x088000
[ 3.030178] pci 0000:7f:17.4: [8086:6fb8] type 00 class 0x088000
[ 3.030235] pci 0000:7f:17.5: [8086:6fb9] type 00 class 0x088000
[ 3.030291] pci 0000:7f:17.6: [8086:6fba] type 00 class 0x088000
[ 3.030345] pci 0000:7f:17.7: [8086:6fbb] type 00 class 0x088000
[ 3.030409] pci 0000:7f:1e.0: [8086:6f98] type 00 class 0x088000
[ 3.030462] pci 0000:7f:1e.1: [8086:6f99] type 00 class 0x088000
[ 3.030518] pci 0000:7f:1e.2: [8086:6f9a] type 00 class 0x088000
[ 3.030572] pci 0000:7f:1e.3: [8086:6fc0] type 00 class 0x088000
[ 3.030615] pci 0000:7f:1e.4: [8086:6f9c] type 00 class 0x088000
[ 3.030674] pci 0000:7f:1f.0: [8086:6f88] type 00 class 0x088000
[ 3.030733] pci 0000:7f:1f.2: [8086:6f8a] type 00 class 0x088000
[ 3.042990] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 3.042994] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 3.044164] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 3.044549] PCI host bridge to bus 0000:00
[ 3.044551] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 3.044552] pci_bus 0000:00: root bus resource [io 0x1000-0xbfff window]
[ 3.044554] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 3.044555] pci_bus 0000:00: root bus resource [mem 0x90000000-0xc7ffbfff window]
[ 3.044556] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 3.044565] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000
[ 3.044734] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400
[ 3.044783] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 3.044867] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 3.044912] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400
[ 3.044960] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 3.045041] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 3.045085] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400
[ 3.045133] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 3.045215] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 3.045256] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000
[ 3.045391] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000
[ 3.045541] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000
[ 3.045674] pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020
[ 3.045682] pci 0000:00:05.4: reg 0x10: [mem 0xc7f19000-0xc7f19fff]
[ 3.045840] pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
[ 3.046059] pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
[ 3.046075] pci 0000:00:11.4: reg 0x10: [io 0xb110-0xb117]
[ 3.046083] pci 0000:00:11.4: reg 0x14: [io 0xb100-0xb103]
[ 3.046091] pci 0000:00:11.4: reg 0x18: [io 0xb0f0-0xb0f7]
[ 3.046099] pci 0000:00:11.4: reg 0x1c: [io 0xb0e0-0xb0e3]
[ 3.046107] pci 0000:00:11.4: reg 0x20: [io 0xb020-0xb03f]
[ 3.046115] pci 0000:00:11.4: reg 0x24: [mem 0xc7f18000-0xc7f187ff]
[ 3.046159] pci 0000:00:11.4: PME# supported from D3hot
[ 3.046285] pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
[ 3.046303] pci 0000:00:14.0: reg 0x10: [mem 0xc7f00000-0xc7f0ffff 64bit]
[ 3.046365] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 3.046461] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 3.046509] pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
[ 3.046527] pci 0000:00:16.0: reg 0x10: [mem 0xc7f17000-0xc7f1700f 64bit]
[ 3.046590] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 3.046712] pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000
[ 3.046729] pci 0000:00:16.1: reg 0x10: [mem 0xc7f16000-0xc7f1600f 64bit]
[ 3.046793] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
[ 3.046927] pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
[ 3.046944] pci 0000:00:1a.0: reg 0x10: [mem 0xc7f14000-0xc7f143ff]
[ 3.047029] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 3.047127] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 3.047181] pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
[ 3.047255] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 3.047335] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 3.047388] pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
[ 3.047461] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 3.047542] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 3.047592] pci 0000:00:1c.5: [8086:8d1a] type 01 class 0x060400
[ 3.047666] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 3.047746] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 3.047800] pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
[ 3.047817] pci 0000:00:1d.0: reg 0x10: [mem 0xc7f13000-0xc7f133ff]
[ 3.047903] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 3.047999] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 3.048055] pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
[ 3.048264] pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
[ 3.048278] pci 0000:00:1f.2: reg 0x10: [io 0xb070-0xb077]
[ 3.048285] pci 0000:00:1f.2: reg 0x14: [io 0xb060-0xb063]
[ 3.048292] pci 0000:00:1f.2: reg 0x18: [io 0xb050-0xb057]
[ 3.048299] pci 0000:00:1f.2: reg 0x1c: [io 0xb040-0xb043]
[ 3.048306] pci 0000:00:1f.2: reg 0x20: [io 0xb000-0xb01f]
[ 3.048313] pci 0000:00:1f.2: reg 0x24: [mem 0xc7f12000-0xc7f127ff]
[ 3.048350] pci 0000:00:1f.2: PME# supported from D3hot
[ 3.048473] pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
[ 3.048487] pci 0000:00:1f.3: reg 0x10: [mem 0xc7f11000-0xc7f110ff 64bit]
[ 3.048507] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
[ 3.048828] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 3.049033] pci 0000:02:00.0: [1002:67ef] type 00 class 0x030000
[ 3.049048] pci 0000:02:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 3.049058] pci 0000:02:00.0: reg 0x18: [mem 0xc0000000-0xc01fffff 64bit pref]
[ 3.049064] pci 0000:02:00.0: reg 0x20: [io 0xa000-0xa0ff]
[ 3.049071] pci 0000:02:00.0: reg 0x24: [mem 0xc7e00000-0xc7e3ffff]
[ 3.049077] pci 0000:02:00.0: reg 0x30: [mem 0xc7e40000-0xc7e5ffff pref]
[ 3.049136] pci 0000:02:00.0: supports D1 D2
[ 3.049137] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 3.049237] pci 0000:02:00.1: [1002:aae0] type 00 class 0x040300
[ 3.049250] pci 0000:02:00.1: reg 0x10: [mem 0xc7e60000-0xc7e63fff 64bit]
[ 3.049324] pci 0000:02:00.1: supports D1 D2
[ 3.064757] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 3.064760] pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
[ 3.064763] pci 0000:00:02.0: bridge window [mem 0xc7e00000-0xc7efffff]
[ 3.064768] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xc01fffff 64bit pref]
[ 3.065040] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 3.065114] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 3.065233] pci 0000:05:00.0: [8086:1533] type 00 class 0x020000
[ 3.065258] pci 0000:05:00.0: reg 0x10: [mem 0xc7d00000-0xc7d7ffff]
[ 3.065286] pci 0000:05:00.0: reg 0x18: [io 0x9000-0x901f]
[ 3.065301] pci 0000:05:00.0: reg 0x1c: [mem 0xc7d80000-0xc7d83fff]
[ 3.065461] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 3.080775] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 3.080780] pci 0000:00:1c.4: bridge window [io 0x9000-0x9fff]
[ 3.080784] pci 0000:00:1c.4: bridge window [mem 0xc7d00000-0xc7dfffff]
[ 3.080910] pci 0000:06:00.0: [8086:1533] type 00 class 0x020000
[ 3.080935] pci 0000:06:00.0: reg 0x10: [mem 0xc7c00000-0xc7c7ffff]
[ 3.080963] pci 0000:06:00.0: reg 0x18: [io 0x8000-0x801f]
[ 3.080978] pci 0000:06:00.0: reg 0x1c: [mem 0xc7c80000-0xc7c83fff]
[ 3.081123] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 3.096794] pci 0000:00:1c.5: PCI bridge to [bus 06]
[ 3.096798] pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff]
[ 3.096803] pci 0000:00:1c.5: bridge window [mem 0xc7c00000-0xc7cfffff]
[ 3.096855] pci_bus 0000:00: on NUMA node 0
[ 3.098095] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
[ 3.098098] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 3.098403] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 3.098611] PCI host bridge to bus 0000:80
[ 3.098613] pci_bus 0000:80: root bus resource [io 0xc000-0xffff window]
[ 3.098614] pci_bus 0000:80: root bus resource [mem 0xc8000000-0xfbffbfff window]
[ 3.098615] pci_bus 0000:80: root bus resource [bus 80-fe]
[ 3.098624] pci 0000:80:05.0: [8086:6f28] type 00 class 0x088000
[ 3.098727] pci 0000:80:05.1: [8086:6f29] type 00 class 0x088000
[ 3.098839] pci 0000:80:05.2: [8086:6f2a] type 00 class 0x088000
[ 3.098935] pci 0000:80:05.4: [8086:6f2c] type 00 class 0x080020
[ 3.098942] pci 0000:80:05.4: reg 0x10: [mem 0xfbf00000-0xfbf00fff]
[ 3.099050] pci_bus 0000:80: on NUMA node 1
[ 3.099433] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 12 14 15)
[ 3.099530] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 *7 9 12 14 15)
[ 3.099621] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *10 12 14 15)
[ 3.099702] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 *11 12 14 15)
[ 3.099786] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 3.099876] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 3.099965] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 3.100053] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 3.100236] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 3.100438] vgaarb: setting as boot device: PCI:0000:02:00.0
[ 3.100439] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 3.100441] vgaarb: loaded
[ 3.100441] vgaarb: bridge control possible 0000:02:00.0
[ 3.100553] PCI: Using ACPI for IRQ routing
[ 3.104985] PCI: pci_cache_line_size set to 64 bytes
[ 3.105202] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 3.105204] e820: reserve RAM buffer [mem 0x79cfc000-0x7bffffff]
[ 3.105439] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 3.105444] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 3.107574] clocksource: Switched to clocksource hpet
[ 3.116127] VFS: Disk quotas dquot_6.6.0
[ 3.116204] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.116369] pnp: PnP ACPI init
[ 3.116892] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 3.117084] system 00:01: [io 0x0500-0x057f] has been reserved
[ 3.117086] system 00:01: [io 0x0400-0x047f] has been reserved
[ 3.117088] system 00:01: [io 0x0580-0x059f] has been reserved
[ 3.117089] system 00:01: [io 0x0600-0x061f] has been reserved
[ 3.117091] system 00:01: [io 0x0880-0x0883] has been reserved
[ 3.117092] system 00:01: [io 0x0800-0x081f] has been reserved
[ 3.117094] system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved
[ 3.117096] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
[ 3.117097] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[ 3.117099] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[ 3.117100] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
[ 3.117101] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
[ 3.117102] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
[ 3.117105] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.117311] system 00:02: [io 0x0290-0x029f] has been reserved
[ 3.117313] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.117665] pnp 00:03: [dma 0 disabled]
[ 3.117725] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 3.118034] pnp 00:04: [dma 0 disabled]
[ 3.118081] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 3.119101] pnp: PnP ACPI: found 5 devices
[ 3.126614] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 3.126714] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 3.126717] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 3.126719] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[ 3.126750] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 3.126752] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 3.126754] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 3.126755] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 3.126757] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 3.126759] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 3.126762] pci 0000:00:1c.0: BAR 14: assigned [mem 0x90000000-0x901fffff]
[ 3.126766] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref]
[ 3.126769] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 3.126771] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 3.126778] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 3.126780] pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
[ 3.126783] pci 0000:00:02.0: bridge window [mem 0xc7e00000-0xc7efffff]
[ 3.126785] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xc01fffff 64bit pref]
[ 3.126788] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 3.126795] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 3.126805] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 3.126809] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x901fffff]
[ 3.126812] pci 0000:00:1c.0: bridge window [mem 0x90200000-0x903fffff 64bit pref]
[ 3.126818] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 3.126820] pci 0000:00:1c.4: bridge window [io 0x9000-0x9fff]
[ 3.126824] pci 0000:00:1c.4: bridge window [mem 0xc7d00000-0xc7dfffff]
[ 3.126832] pci 0000:00:1c.5: PCI bridge to [bus 06]
[ 3.126834] pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff]
[ 3.126838] pci 0000:00:1c.5: bridge window [mem 0xc7c00000-0xc7cfffff]
[ 3.126845] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 3.126847] pci_bus 0000:00: resource 5 [io 0x1000-0xbfff window]
[ 3.126848] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 3.126850] pci_bus 0000:00: resource 7 [mem 0x90000000-0xc7ffbfff window]
[ 3.126851] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 3.126852] pci_bus 0000:02: resource 1 [mem 0xc7e00000-0xc7efffff]
[ 3.126854] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xc01fffff 64bit pref]
[ 3.126855] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 3.126856] pci_bus 0000:04: resource 1 [mem 0x90000000-0x901fffff]
[ 3.126858] pci_bus 0000:04: resource 2 [mem 0x90200000-0x903fffff 64bit pref]
[ 3.126859] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
[ 3.126860] pci_bus 0000:05: resource 1 [mem 0xc7d00000-0xc7dfffff]
[ 3.126861] pci_bus 0000:06: resource 0 [io 0x8000-0x8fff]
[ 3.126862] pci_bus 0000:06: resource 1 [mem 0xc7c00000-0xc7cfffff]
[ 3.126865] pci_bus 0000:80: resource 4 [io 0xc000-0xffff window]
[ 3.126866] pci_bus 0000:80: resource 5 [mem 0xc8000000-0xfbffbfff window]
[ 3.127128] NET: Registered protocol family 2
[ 3.127697] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
[ 3.128435] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 3.128613] TCP: Hash tables configured (established 524288 bind 65536)
[ 3.128734] UDP hash table entries: 65536 (order: 9, 2097152 bytes)
[ 3.129156] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
[ 3.129635] NET: Registered protocol family 1
[ 3.171704] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 3.171707] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 3.171789] Unpacking initramfs...
[ 3.554565] Freeing initrd memory: 19648K (ffff9b167598f000 - ffff9b1676cbf000)
[ 3.554764] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.554766] software IO TLB [mem 0x75cfc000-0x79cfc000] (64MB) mapped at [ffff9b16b5cfc000-ffff9b16b9cfbfff]
[ 3.554802] Intel CQM monitoring enabled
[ 3.554802] Intel MBM enabled
[ 3.556204] futex hash table entries: 8192 (order: 7, 524288 bytes)
[ 3.556352] audit: initializing netlink subsys (disabled)
[ 3.556369] audit: type=2000 audit(1485102950.428:1): initialized
[ 3.556793] Initialise system trusted keyrings
[ 3.557116] workingset: timestamp_bits=40 max_order=25 bucket_order=0
[ 3.557131] zbud: loaded
[ 3.599751] Key type asymmetric registered
[ 3.599752] Asymmetric key parser 'x509' registered
[ 3.599812] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 3.599936] io scheduler noop registered
[ 3.599937] io scheduler deadline registered
[ 3.599953] io scheduler cfq registered (default)
[ 3.601554] aer 0000:00:01.0:pcie002: service driver aer loaded
[ 3.601578] aer 0000:00:02.0:pcie002: service driver aer loaded
[ 3.601601] aer 0000:00:03.0:pcie002: service driver aer loaded
[ 3.601618] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 3.601620] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
[ 3.601628] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 3.601630] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 3.601631] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[ 3.601633] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded
[ 3.601640] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[ 3.601642] pcie_pme 0000:00:03.0:pcie001: service driver pcie_pme loaded
[ 3.601671] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 3.601682] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 3.601710] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 3.601711] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 3.601722] pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded
[ 3.601749] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 3.601750] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 3.601761] pcie_pme 0000:00:1c.5:pcie001: service driver pcie_pme loaded
[ 3.601773] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.601792] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 3.601892] pciehp 0000:00:1c.0:pcie004: service driver pciehp loaded
[ 3.601897] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.601917] intel_idle: MWAIT substates: 0x2120
[ 3.601918] intel_idle: v0.4.1 model 0x4F
[ 3.603416] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.609343] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 3.609345] pstore: using zlib compression
[ 3.609348] pstore: Registered erst as persistent store backend
[ 3.609640] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[ 3.609780] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.630291] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.650840] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 3.651328] Linux agpgart interface v0.103
[ 3.651480] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 3.651480] AMD IOMMUv2 functionality not available on this system
[ 3.654610] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.657486] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.657490] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.657669] mousedev: PS/2 mouse device common for all mice
[ 3.657704] rtc_cmos 00:00: RTC can wake from S4
[ 3.657901] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 3.657949] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.657962] intel_pstate: Intel P-state driver initializing
[ 3.664881] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.666455] NET: Registered protocol family 10
[ 3.667038] mip6: Mobile IPv6
[ 3.667040] NET: Registered protocol family 17
[ 3.667044] mpls_gso: MPLS GSO support
[ 3.669256] microcode: sig=0x406f1, pf=0x1, revision=0xb000017
[ 3.670487] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.670717] registered taskstats version 1
[ 3.670719] Loading compiled-in X.509 certificates
[ 3.673491] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 3.673908] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 3.673978] zswap: loaded using pool lzo/zbud
[ 3.675865] rtc_cmos 00:00: setting system clock to 2017-01-22 16:35:50 UTC (1485102950)
[ 3.676013] PM: Hibernation image not present or could not be loaded.
[ 3.678113] Freeing unused kernel memory: 1360K (ffffffff8a91b000 - ffffffff8aa6f000)
[ 3.678114] Write protecting the kernel read-only data: 10240k
[ 3.678491] Freeing unused kernel memory: 60K (ffff9b3124bf1000 - ffff9b3124c00000)
[ 3.683315] Freeing unused kernel memory: 1288K (ffff9b3124ebe000 - ffff9b3125000000)
[ 3.694683] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.716638] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.716745] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.716757] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.716770] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.717972] random: udevadm: uninitialized urandom read (16 bytes read)
[ 3.718013] random: udevadm: uninitialized urandom read (16 bytes read)
[ 3.721024] random: udevadm: uninitialized urandom read (16 bytes read)
[ 3.721099] random: udevadm: uninitialized urandom read (16 bytes read)
[ 3.721635] random: udevadm: uninitialized urandom read (16 bytes read)
[ 3.721709] random: udevadm: uninitialized urandom read (16 bytes read)
[ 3.804564] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 3.842728] pps_core: LinuxPPS API ver. 1 registered
[ 3.842730] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.844295] PTP clock support registered
[ 3.846153] dca service started, version 1.12.1
[ 3.846457] SCSI subsystem initialized
[ 3.847401] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 3.848480] ACPI: bus type USB registered
[ 3.848506] usbcore: registered new interface driver usbfs
[ 3.848519] usbcore: registered new interface driver hub
[ 3.848659] usbcore: registered new device driver usb
[ 3.851770] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.853292] libata version 3.00 loaded.
[ 3.854663] ehci-pci: EHCI PCI platform driver
[ 3.854742] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[ 3.854744] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 3.855032] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 3.855040] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.855094] ehci-pci 0000:00:1a.0: debug port 2
[ 3.855565] igb 0000:05:00.0: PHY reset is blocked due to SOL/IDER session.
[ 3.858999] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 3.859018] ehci-pci 0000:00:1a.0: irq 19, io mem 0xc7f14000
[ 3.868957] AVX2 version of gcm_enc/dec engaged.
[ 3.868958] AES CTR mode by8 optimization enabled
[ 3.871553] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.871724] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.871726] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.871728] usb usb1: Product: EHCI Host Controller
[ 3.871729] usb usb1: Manufacturer: Linux 4.8.0-2-amd64 ehci_hcd
[ 3.871731] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.871980] hub 1-0:1.0: USB hub found
[ 3.871990] hub 1-0:1.0: 2 ports detected
[ 3.872426] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 3.872433] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.872451] ehci-pci 0000:00:1d.0: debug port 2
[ 3.876360] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 3.876367] ehci-pci 0000:00:1d.0: irq 18, io mem 0xc7f13000
[ 3.880526] pps pps0: new PPS source ptp0
[ 3.880528] igb 0000:05:00.0: added PHC on eth0
[ 3.880530] igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 3.880532] igb 0000:05:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 34:97:f6:5c:0a:1f
[ 3.880596] igb 0000:05:00.0: eth0: PBA No: 001300-000
[ 3.880597] igb 0000:05:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 3.891601] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.891655] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.891656] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.891658] usb usb2: Product: EHCI Host Controller
[ 3.891659] usb usb2: Manufacturer: Linux 4.8.0-2-amd64 ehci_hcd
[ 3.891659] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.891896] hub 2-0:1.0: USB hub found
[ 3.891900] hub 2-0:1.0: 2 ports detected
[ 3.892125] ahci 0000:00:11.4: version 3.0
[ 3.892419] ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 3.892421] ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst
[ 3.909810] pps pps1: new PPS source ptp1
[ 3.909812] igb 0000:06:00.0: added PHC on eth1
[ 3.909814] igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 3.909816] igb 0000:06:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 34:97:f6:5c:0a:20
[ 3.909875] igb 0000:06:00.0: eth1: PBA No: 001300-000
[ 3.909878] igb 0000:06:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 3.911286] igb 0000:06:00.0 eth2: renamed from eth1
[ 3.932253] scsi host0: ahci
[ 3.932414] scsi host1: ahci
[ 3.932554] scsi host2: ahci
[ 3.932706] scsi host3: ahci
[ 3.932771] ata1: SATA max UDMA/133 abar m2048@0xc7f18000 port 0xc7f18100 irq 43
[ 3.932773] ata2: SATA max UDMA/133 abar m2048@0xc7f18000 port 0xc7f18180 irq 43
[ 3.932775] ata3: SATA max UDMA/133 abar m2048@0xc7f18000 port 0xc7f18200 irq 43
[ 3.932777] ata4: SATA max UDMA/133 abar m2048@0xc7f18000 port 0xc7f18280 irq 43
[ 3.933061] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 3.933063] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 3.943688] igb 0000:05:00.0 eth1: renamed from eth0
[ 3.992531] scsi host4: ahci
[ 3.992696] scsi host5: ahci
[ 3.992866] scsi host6: ahci
[ 3.993042] scsi host7: ahci
[ 3.993219] scsi host8: ahci
[ 3.993380] scsi host9: ahci
[ 3.993463] ata5: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12100 irq 44
[ 3.993465] ata6: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12180 irq 44
[ 3.993467] ata7: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12200 irq 44
[ 3.993469] ata8: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12280 irq 44
[ 3.993470] ata9: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12300 irq 44
[ 3.993472] ata10: SATA max UDMA/133 abar m2048@0xc7f12000 port 0xc7f12380 irq 44
[ 3.993729] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.993738] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 3.994872] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 3.994877] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 3.995327] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.995330] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.995332] usb usb3: Product: xHCI Host Controller
[ 3.995334] usb usb3: Manufacturer: Linux 4.8.0-2-amd64 xhci-hcd
[ 3.995335] usb usb3: SerialNumber: 0000:00:14.0
[ 3.995671] hub 3-0:1.0: USB hub found
[ 3.995718] hub 3-0:1.0: 15 ports detected
[ 3.999465] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.999494] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 3.999550] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.999552] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.999554] usb usb4: Product: xHCI Host Controller
[ 3.999555] usb usb4: Manufacturer: Linux 4.8.0-2-amd64 xhci-hcd
[ 3.999557] usb usb4: SerialNumber: 0000:00:14.0
[ 3.999788] hub 4-0:1.0: USB hub found
[ 3.999809] hub 4-0:1.0: 6 ports detected
[ 4.199534] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 4.219529] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.246591] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.246813] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.246839] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.246868] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.250349] ata1.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max UDMA/133
[ 4.250352] ata1.00: 145226112 sectors, multi 16: LBA48
[ 4.254985] ata1.00: configured for UDMA/133
[ 4.255590] scsi 0:0:0:0: Direct-Access ATA WDC WD740GD-00FL 8F33 PQ: 0 ANSI: 5
[ 4.305944] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.306561] ata6.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 4.306564] ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.306872] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.306901] ata9: SATA link down (SStatus 0 SControl 300)
[ 4.306926] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.306955] ata10: SATA link down (SStatus 0 SControl 300)
[ 4.306989] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.307176] ata6.00: configured for UDMA/133
[ 4.307459] ata8.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 4.307461] ata8.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.307529] ata7.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 4.307531] ata7.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.307560] ata5.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 4.307561] ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.308082] ata7.00: configured for UDMA/133
[ 4.308094] ata8.00: configured for UDMA/133
[ 4.308123] ata5.00: configured for UDMA/133
[ 4.308516] scsi 4:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
[ 4.323521] usb 3-4: new full-speed USB device number 2 using xhci_hcd
[ 4.347910] usb 1-1: New USB device found, idVendor=8087, idProduct=800a
[ 4.347913] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.348198] hub 1-1:1.0: USB hub found
[ 4.348278] hub 1-1:1.0: 6 ports detected
[ 4.356246] scsi 5:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
[ 4.358672] sd 0:0:0:0: [sda] 145226112 512-byte logical blocks: (74.4 GB/69.2 GiB)
[ 4.358709] sd 4:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 4.358712] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[ 4.358726] sd 0:0:0:0: [sda] Write Protect is off
[ 4.358731] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.358744] sd 4:0:0:0: [sdb] Write Protect is off
[ 4.358747] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.358753] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.358761] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.367782] usb 2-1: New USB device found, idVendor=8087, idProduct=8002
[ 4.367785] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.368073] hub 2-1:1.0: USB hub found
[ 4.368155] hub 2-1:1.0: 8 ports detected
[ 4.379586] sda: sda1 sda2 < sda5 >
[ 4.380013] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.399644] sd 5:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 4.399646] sd 5:0:0:0: [sdc] 4096-byte physical blocks
[ 4.399670] sd 5:0:0:0: [sdc] Write Protect is off
[ 4.399672] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.399684] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.400045] scsi 6:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
[ 4.418315] sdb: sdb1
[ 4.418574] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 4.443623] sd 6:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 4.443625] sd 6:0:0:0: [sdd] 4096-byte physical blocks
[ 4.443646] sd 6:0:0:0: [sdd] Write Protect is off
[ 4.443648] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 4.443658] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.444016] scsi 7:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
[ 4.462771] sdc: sdc1
[ 4.463009] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 4.469897] usb 3-4: New USB device found, idVendor=046d, idProduct=c52b
[ 4.469900] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.469902] usb 3-4: Product: USB Receiver
[ 4.469903] usb 3-4: Manufacturer: Logitech
[ 4.475810] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.481820] usbcore: registered new interface driver usbhid
[ 4.481821] usbhid: USB HID core driver
[ 4.484631] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2
[ 4.487613] sd 7:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 4.487615] sd 7:0:0:0: [sde] 4096-byte physical blocks
[ 4.487639] sd 7:0:0:0: [sde] Write Protect is off
[ 4.487641] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 4.487651] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.497017] sdd: sdd1
[ 4.497293] sd 6:0:0:0: [sdd] Attached SCSI disk
[ 4.515555] random: fast init done
[ 4.539906] sde: sde1
[ 4.540217] sd 7:0:0:0: [sde] Attached SCSI disk
[ 4.571502] tsc: Refined TSC clocksource calibration: 2095.148 MHz
[ 4.571538] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e3349143ab, max_idle_ns: 440795282364 ns
[ 4.613669] input: Logitech K520 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:2011.0005/input/input3
[ 4.613875] logitech-hidpp-device 0003:046D:2011.0005: input,hidraw1: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:00:14.0-4:2
[ 4.651331] md: bind<sdc1>
[ 4.688417] md: bind<sdd1>
[ 4.692251] md: raid1 personality registered for level 1
[ 4.692816] md/raid1:md127: active with 2 out of 2 mirrors
[ 4.692928] created bitmap (22 pages) for device md127
[ 4.693674] md127: bitmap initialized from disk: read 2 pages, set 0 of 44709 bits
[ 4.714651] md: bind<sde1>
[ 4.719914] md: bind<sdb1>
[ 4.722106] md/raid1:md0: active with 2 out of 2 mirrors
[ 4.722203] created bitmap (22 pages) for device md0
[ 4.722914] md0: bitmap initialized from disk: read 2 pages, set 0 of 44709 bits
[ 4.758436] md127: detected capacity change from 0 to 3000312528896
[ 4.800272] md0: detected capacity change from 0 to 3000312528896
[ 4.871922] random: crng init done
[ 5.008291] device-mapper: uevent: version 1.0.3
[ 5.008451] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 5.595719] clocksource: Switched to clocksource tsc
[ 9.821328] input: Logitech M310/M310t as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:4031.0004/input/input4
[ 9.821488] logitech-hidpp-device 0003:046D:4031.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech M310/M310t] on usb-0000:00:14.0-4:1
[ 9.828474] md: linear personality registered for level -1
[ 9.831316] md: multipath personality registered for level -4
[ 9.834108] md: raid0 personality registered for level 0
[ 9.907060] raid6: sse2x1 gen() 3100 MB/s
[ 9.975057] raid6: sse2x1 xor() 2573 MB/s
[ 10.043050] raid6: sse2x2 gen() 5770 MB/s
[ 10.111043] raid6: sse2x2 xor() 3255 MB/s
[ 10.179042] raid6: sse2x4 gen() 6024 MB/s
[ 10.247032] raid6: sse2x4 xor() 3632 MB/s
[ 10.315026] raid6: avx2x1 gen() 8302 MB/s
[ 10.383020] raid6: avx2x2 gen() 11415 MB/s
[ 10.451016] raid6: avx2x4 gen() 11918 MB/s
[ 10.451016] raid6: using algorithm avx2x4 gen() 11918 MB/s
[ 10.451017] raid6: using avx2x2 recovery algorithm
[ 10.451813] xor: automatically using best checksumming function:
[ 10.491009] avx : 17693.000 MB/sec
[ 10.491763] async_tx: api initialized (async)
[ 10.497715] md: raid6 personality registered for level 6
[ 10.497716] md: raid5 personality registered for level 5
[ 10.497717] md: raid4 personality registered for level 4
[ 10.503564] md: raid10 personality registered for level 10
[ 10.526177] PM: Starting manual resume from disk
[ 10.526180] PM: Hibernation image partition 253:5 present
[ 10.526181] PM: Looking for hibernation image.
[ 10.526289] PM: Image not found (code -22)
[ 10.526290] PM: Hibernation image not present or could not be loaded.
[ 10.692806] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 12.523486] power_meter ACPI000D:00: Found ACPI power meter.
[ 12.523709] power_meter ACPI000D:00: Ignoring unsafe software power cap!
[ 12.523993] wmi: Mapper loaded
[ 12.526142] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.543100] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 12.543107] ACPI: Power Button [PWRB]
[ 12.543178] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 12.543181] ACPI: Power Button [PWRF]
[ 12.720003] ipmi message handler version 39.2
[ 12.735437] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 12.735439] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 12.735439] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 12.735440] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 12.735441] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 12.884585] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 12.884674] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 12.884744] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 12.884804] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 12.884862] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 12.963421] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 13.046786] ipmi_si IPI0001:00: ipmi_si: probing via ACPI
[ 13.046826] ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0
[ 13.046839] ipmi_si: Adding ACPI-specified kcs state machine
[ 13.046868] IPMI System Interface driver.
[ 13.046948] ipmi_si: probing via SMBIOS
[ 13.046950] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 13.046950] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
[ 13.046954] ipmi_si: probing via SPMI
[ 13.046956] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
[ 13.046957] ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
[ 13.046960] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 13.283979] iTCO_vendor_support: vendor-support=0
[ 13.302419] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 13.302470] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 13.400034] ipmi_si IPI0001:00: Found new BMC (man_id: 0x000a3f, prod_id: 0x0e73, dev_id: 0x20)
[ 13.400046] ipmi_si IPI0001:00: IPMI kcs interface initialized
[ 13.501830] mei_me 0000:00:16.0: Device doesn't have valid ME Interface
[ 13.562206] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
[ 13.562209] snd_hda_intel 0000:02:00.1: Force to non-snoop mode
[ 13.574923] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input8
[ 13.575080] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input9
[ 13.575187] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input10
[ 13.575288] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input11
[ 13.575394] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card0/input12
[ 14.282072] EDAC MC: Ver: 3.0.0
[ 14.294993] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 14.295004] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 14.295012] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 14.295018] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 14.295022] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 14.295028] EDAC sbridge: Seeking for: PCI ID 8086:6ffc
[ 14.295033] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 14.295037] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 14.295043] EDAC sbridge: Seeking for: PCI ID 8086:6ffd
[ 14.295047] EDAC sbridge: Seeking for: PCI ID 8086:6f60
[ 14.295056] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 14.295060] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 14.295066] EDAC sbridge: Seeking for: PCI ID 8086:6fa8
[ 14.295070] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 14.295075] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 14.295080] EDAC sbridge: Seeking for: PCI ID 8086:6f71
[ 14.295084] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 14.295089] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 14.295094] EDAC sbridge: Seeking for: PCI ID 8086:6faa
[ 14.295098] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 14.295103] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 14.295108] EDAC sbridge: Seeking for: PCI ID 8086:6fab
[ 14.295112] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 14.295117] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 14.295123] EDAC sbridge: Seeking for: PCI ID 8086:6fac
[ 14.295126] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 14.295131] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 14.295137] EDAC sbridge: Seeking for: PCI ID 8086:6fad
[ 14.295140] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 14.295145] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 14.295151] EDAC sbridge: Seeking for: PCI ID 8086:6faf
[ 14.295154] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 14.295160] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 14.295166] EDAC sbridge: Seeking for: PCI ID 8086:6f68
[ 14.295169] EDAC sbridge: Seeking for: PCI ID 8086:6f79
[ 14.295177] EDAC sbridge: Seeking for: PCI ID 8086:6f6a
[ 14.295186] EDAC sbridge: Seeking for: PCI ID 8086:6f6b
[ 14.295195] EDAC sbridge: Seeking for: PCI ID 8086:6f6c
[ 14.295204] EDAC sbridge: Seeking for: PCI ID 8086:6f6d
[ 14.295446] EDAC MC0: Giving out device to module sbridge_edac.c controller Broadwell Socket#0: DEV 0000:ff:12.0 (INTERRUPT)
[ 14.295761] EDAC MC1: Giving out device to module sbridge_edac.c controller Broadwell Socket#1: DEV 0000:7f:12.0 (INTERRUPT)
[ 14.295763] EDAC sbridge: Ver: 1.1.1
[ 14.310491] intel_rapl: Found RAPL domain package
[ 14.310503] intel_rapl: Found RAPL domain dram
[ 14.310505] intel_rapl: DRAM domain energy unit 15300pj
[ 14.310530] intel_rapl: Found RAPL domain package
[ 14.310540] intel_rapl: Found RAPL domain dram
[ 14.310542] intel_rapl: DRAM domain energy unit 15300pj
[ 15.469818] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 15.687697] Adding 4247548k swap on /dev/mapper/vgsys-lvswap. Priority:-1 extents:1 across:4247548k FS
[ 16.139546] lp: driver loaded but no devices found
[ 16.157548] ppdev: user-space parallel port driver
[ 16.203268] loop: module loaded
[ 16.272357] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 16.370566] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 16.893201] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 16.896262] xenbr0: port 1(eth1) entered blocking state
[ 16.896264] xenbr0: port 1(eth1) entered disabled state
[ 16.896402] device eth1 entered promiscuous mode
[ 16.938503] igb 0000:05:00.0 eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 16.940365] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready
[ 17.914576] xenbr0: port 1(eth1) entered blocking state
[ 17.914579] xenbr0: port 1(eth1) entered forwarding state
[ 17.914801] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready
[ 25.987879] RPC: Registered named UNIX socket transport module.
[ 25.987880] RPC: Registered udp transport module.
[ 25.987881] RPC: Registered tcp transport module.
[ 25.987882] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 26.015710] FS-Cache: Loaded
[ 26.057367] FS-Cache: Netfs 'nfs' registered for caching
[ 26.096463] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[-- Attachment #1.1.4: cknowsvr01-lspci-vvv.txt --]
[-- Type: text/plain, Size: 133209 bytes --]
root@cknowsvr01:/home/diederik# lspci -vvv
00:00.0 Host bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DMI2 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DMI2
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 0
NUMA node: 0
Capabilities: [90] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L1, Exit Latency L0s <512ns, L1 <16us
ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
Capabilities: [144 v1] Vendor Specific Information: ID=0004 Rev=1 Len=03c <?>
Capabilities: [1d0 v1] Vendor Specific Information: ID=0003 Rev=1 Len=00a <?>
Capabilities: [280 v1] Vendor Specific Information: ID=0005 Rev=3 Len=018 <?>
Capabilities: [300 v1] Vendor Specific Information: ID=0008 Rev=0 Len=038 <?>
00:01.0 PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 1 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 298
NUMA node: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 1
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address: fee00258 Data: 0000
Masking: 00000002 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 8GT/s, Width x8, ASPM L1, Exit Latency L0s <512ns, L1 <16us
ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug- Surprise-
Slot #2, PowerLimit 0.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd On, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible+
RootCap: CRSVisible+
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [100 v1] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
Capabilities: [110 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Capabilities: [148 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [1d0 v1] Vendor Specific Information: ID=0003 Rev=1 Len=00a <?>
Capabilities: [250 v1] #19
Capabilities: [280 v1] Vendor Specific Information: ID=0005 Rev=3 Len=018 <?>
Capabilities: [300 v1] Vendor Specific Information: ID=0008 Rev=0 Len=038 <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 2 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 299
NUMA node: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: c7e00000-c7efffff
Prefetchable memory behind bridge: 00000000b0000000-00000000c01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR+ <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 2
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address: fee00298 Data: 0000
Masking: 00000002 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 256 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #3, Speed 8GT/s, Width x16, ASPM L1, Exit Latency L0s <512ns, L1 <16us
ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #5, PowerLimit 0.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible+
RootCap: CRSVisible+
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd+
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, EqualizationPhase1+
EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
Capabilities: [110 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Capabilities: [148 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 0e, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [1d0 v1] Vendor Specific Information: ID=0003 Rev=1 Len=00a <?>
Capabilities: [250 v1] #19
Capabilities: [280 v1] Vendor Specific Information: ID=0005 Rev=3 Len=018 <?>
Capabilities: [300 v1] Vendor Specific Information: ID=0008 Rev=0 Len=038 <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:03.0 PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 3 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 300
NUMA node: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 3
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address: fee002d8 Data: 0000
Masking: 00000002 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #7, Speed 8GT/s, Width x16, ASPM L1, Exit Latency L0s <512ns, L1 <16us
ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #3, PowerLimit 0.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible+
RootCap: CRSVisible+
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [100 v1] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
Capabilities: [110 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Capabilities: [148 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [1d0 v1] Vendor Specific Information: ID=0003 Rev=1 Len=00a <?>
Capabilities: [250 v1] #19
Capabilities: [280 v1] Vendor Specific Information: ID=0005 Rev=3 Len=018 <?>
Capabilities: [300 v1] Vendor Specific Information: ID=0008 Rev=0 Len=038 <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:05.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Map/VTd_Misc/System Management (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
00:05.1 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Hot Plug (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100 v1] Vendor Specific Information: ID=0006 Rev=1 Len=010 <?>
Capabilities: [110 v1] Vendor Specific Information: ID=0006 Rev=1 Len=010 <?>
Capabilities: [120 v1] Vendor Specific Information: ID=0006 Rev=1 Len=010 <?>
Capabilities: [130 v1] Vendor Specific Information: ID=0006 Rev=1 Len=010 <?>
00:05.2 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO RAS/Control Status/Global Errors (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
00:05.4 PIC: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D I/O APIC (rev 01) (prog-if 20 [IO(X)-APIC])
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D I/O APIC
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
NUMA node: 0
Region 0: Memory at c7f19000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
00:11.0 Unassigned class [ff00]: Intel Corporation C610/X99 series chipset SPSR (rev 05)
Subsystem: ASUSTeK Computer Inc. C610/X99 series chipset SPSR
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
NUMA node: 0
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
00:11.4 SATA controller: Intel Corporation C610/X99 series chipset sSATA Controller [AHCI mode] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. C610/X99 series chipset sSATA Controller [AHCI mode]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 317
NUMA node: 0
Region 0: I/O ports at b110 [size=8]
Region 1: I/O ports at b100 [size=4]
Region 2: I/O ports at b0f0 [size=8]
Region 3: I/O ports at b0e0 [size=4]
Region 4: I/O ports at b020 [size=32]
Region 5: Memory at c7f18000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee004f8 Data: 0000
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Kernel driver in use: ahci
Kernel modules: ahci
00:14.0 USB controller: Intel Corporation C610/X99 series chipset USB xHCI Host Controller (rev 05) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. C610/X99 series chipset USB xHCI Host Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 316
NUMA node: 0
Region 0: Memory at c7f00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee004d8 Data: 0000
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller: Intel Corporation C610/X99 series chipset MEI Controller #1 (rev 05)
Subsystem: ASUSTeK Computer Inc. C610/X99 series chipset MEI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 5
NUMA node: 0
Region 0: Memory at c7f17000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel modules: mei_me
00:16.1 Communication controller: Intel Corporation C610/X99 series chipset MEI Controller #2 (rev 05)
Subsystem: ASUSTeK Computer Inc. C610/X99 series chipset MEI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 7
NUMA node: 0
Region 0: Memory at c7f16000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:1a.0 USB controller: Intel Corporation C610/X99 series chipset USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. C610/X99 series chipset USB Enhanced Host Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
NUMA node: 0
Region 0: Memory at c7f14000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1c.0 PCI bridge: Intel Corporation C610/X99 series chipset PCI Express Root Port #1 (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 301
NUMA node: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 90000000-901fffff
Prefetchable memory behind bridge: 0000000090200000-00000000903fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg+
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Via WAKE# ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. C610/X99 series chipset PCI Express Root Port
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation C610/X99 series chipset PCI Express Root Port #5 (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 302
NUMA node: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: c7d00000-c7dfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #5, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00338 Data: 0000
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. C610/X99 series chipset PCI Express Root Port
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation C610/X99 series chipset PCI Express Root Port #6 (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 303
NUMA node: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: c7c00000-c7cfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #6, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00378 Data: 0000
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. C610/X99 series chipset PCI Express Root Port
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation C610/X99 series chipset USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. C610/X99 series chipset USB Enhanced Host Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
NUMA node: 0
Region 0: Memory at c7f13000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge: Intel Corporation C610/X99 series chipset LPC Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. C610/X99 series chipset LPC Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
NUMA node: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation C610/X99 series chipset 6-Port SATA Controller [AHCI mode] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. C610/X99 series chipset 6-Port SATA Controller [AHCI mode]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 318
NUMA node: 0
Region 0: I/O ports at b070 [size=8]
Region 1: I/O ports at b060 [size=4]
Region 2: I/O ports at b050 [size=8]
Region 3: I/O ports at b040 [size=4]
Region 4: I/O ports at b000 [size=32]
Region 5: Memory at c7f12000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00518 Data: 0000
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation C610/X99 series chipset SMBus Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. C610/X99 series chipset SMBus Controller
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
NUMA node: 0
Region 0: Memory at c7f11000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0580 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Baffin [Radeon RX 460] (rev cf) (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Baffin [Radeon RX 460]
Physical Slot: 5
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 32
NUMA node: 0
Region 0: Memory at b0000000 (64-bit, prefetchable) [disabled] [size=256M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [disabled] [size=2M]
Region 4: I/O ports at a000 [disabled] [size=256]
Region 5: Memory at c7e00000 (32-bit, non-prefetchable) [disabled] [size=256K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [48] Vendor Specific Information: Len=08 <?>
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L1, Exit Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR+, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, EqualizationPhase1+
EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [200 v1] #15
Capabilities: [270 v1] #19
Capabilities: [2b0 v1] Address Translation Service (ATS)
ATSCap: Invalidate Queue Depth: 00
ATSCtl: Enable-, Smallest Translation Unit: 00
Capabilities: [2c0 v1] Page Request Interface (PRI)
PRICtl: Enable- Reset-
PRISta: RF- UPRGI- Stopped+
Page Request Capacity: 00000020, Page Request Allocation: 00000000
Capabilities: [2d0 v1] Process Address Space ID (PASID)
PASIDCap: Exec+ Priv+, Max PASID Width: 10
PASIDCtl: Enable- Exec- Priv-
Capabilities: [320 v1] Latency Tolerance Reporting
Max snoop latency: 0ns
Max no snoop latency: 0ns
Capabilities: [328 v1] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 1
ARICtl: MFVC- ACS-, Function Group: 0
Capabilities: [370 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=0us PortTPowerOnTime=170us
L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
T_CommonMode=0us LTR1.2_Threshold=0ns
L1SubCtl2: T_PwrOn=10us
Kernel driver in use: pciback
Kernel modules: amdgpu
02:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aae0
Subsystem: XFX Pine Group Inc. Device aae0
Physical Slot: 5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 319
NUMA node: 0
Region 0: Memory at c7e60000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [48] Vendor Specific Information: Len=08 <?>
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L1, Exit Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR+, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00558 Data: 0000
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [328 v1] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 0
ARICtl: MFVC- ACS-, Function Group: 0
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
05:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
Subsystem: ASUSTeK Computer Inc. I210 Gigabit Network Connection
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at c7d00000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 9000 [size=32]
Region 3: Memory at c7d80000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [70] MSI-X: Enable+ Count=5 Masked-
Vector table: BAR=3 offset=00000000
PBA: BAR=3 offset=00002000
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <16us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Device Serial Number 34-97-f6-ff-ff-5c-0a-1f
Capabilities: [1a0 v1] Transaction Processing Hints
Device specific mode supported
Steering table in TPH capability structure
Kernel driver in use: igb
Kernel modules: igb
06:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
Subsystem: ASUSTeK Computer Inc. I210 Gigabit Network Connection
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
NUMA node: 0
Region 0: Memory at c7c00000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 8000 [size=32]
Region 3: Memory at c7c80000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [70] MSI-X: Enable+ Count=5 Masked-
Vector table: BAR=3 offset=00000000
PBA: BAR=3 offset=00002000
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <16us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Device Serial Number 34-97-f6-ff-ff-5c-0a-20
Capabilities: [1a0 v1] Transaction Processing Hints
Device specific mode supported
Steering table in TPH capability structure
Kernel driver in use: igb
Kernel modules: igb
7f:08.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 0 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:08.2 Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 0 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:08.3 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 0 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
Capabilities: [100 v0] Vendor Specific Information: ID=0001 Rev=0 Len=0f0 <?>
7f:09.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 1 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:09.2 Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 1 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:09.3 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 1 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
Capabilities: [100 v0] Vendor Specific Information: ID=0001 Rev=0 Len=0f0 <?>
7f:0b.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:0b.1 Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:0b.2 Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:0b.3 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link Debug (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:0c.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:0c.1 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:0c.2 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:0c.3 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:0c.4 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:0c.5 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:0c.6 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:0c.7 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:0f.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:0f.1 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:0f.4 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:0f.5 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:0f.6 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:10.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R2PCIe Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R2PCIe Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:10.1 Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R2PCIe Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R2PCIe Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:10.5 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:10.6 Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:10.7 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:12.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Home Agent 0 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Home Agent 0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:12.1 Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Home Agent 0 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Home Agent 0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:13.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Target Address/Thermal/RAS (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Target Address/Thermal/RAS
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
7f:13.1 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Target Address/Thermal/RAS (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Target Address/Thermal/RAS
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
7f:13.2 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
7f:13.3 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
7f:13.4 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
7f:13.5 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
7f:13.6 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Broadcast (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:13.7 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Global Broadcast (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:14.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 0 Thermal Control (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 0 Thermal Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
7f:14.1 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 1 Thermal Control (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 1 Thermal Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
7f:14.2 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 0 Error (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 0 Error
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
7f:14.3 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 1 Error (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 1 Error
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
7f:14.4 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:14.5 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:14.6 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:14.7 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:15.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 2 Thermal Control (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 2 Thermal Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
7f:15.1 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 3 Thermal Control (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 3 Thermal Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
7f:15.2 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 2 Error (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 2 Error
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
7f:15.3 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 3 Error (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 3 Error
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
7f:16.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Target Address/Thermal/RAS (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] #00 [0000]
7f:16.6 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 2/3 Broadcast (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:16.7 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Global Broadcast (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:17.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 1 - Channel 0 Thermal Control (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] #00 [0000]
7f:17.4 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 2/3 Interface (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:17.5 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 2/3 Interface (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:17.6 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 2/3 Interface (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:17.7 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 2/3 Interface (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:1e.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:1e.1 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:1e.2 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:1e.3 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at <ignored> [disabled]
7f:1e.4 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:1f.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
7f:1f.2 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
80:05.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Map/VTd_Misc/System Management (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
80:05.1 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Hot Plug (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100 v1] Vendor Specific Information: ID=0006 Rev=1 Len=010 <?>
Capabilities: [110 v1] Vendor Specific Information: ID=0006 Rev=1 Len=010 <?>
Capabilities: [120 v1] Vendor Specific Information: ID=0006 Rev=1 Len=010 <?>
Capabilities: [130 v1] Vendor Specific Information: ID=0006 Rev=1 Len=010 <?>
80:05.2 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO RAS/Control Status/Global Errors (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
80:05.4 PIC: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D I/O APIC (rev 01) (prog-if 20 [IO(X)-APIC])
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D I/O APIC
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at fbf00000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
ff:08.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 0 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:08.2 Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 0 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:08.3 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 0 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
Capabilities: [100 v0] Vendor Specific Information: ID=0001 Rev=0 Len=0f0 <?>
ff:09.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 1 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:09.2 Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 1 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:09.3 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 1 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
Capabilities: [100 v0] Vendor Specific Information: ID=0001 Rev=0 Len=0f0 <?>
ff:0b.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0b.1 Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0b.2 Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0b.3 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link Debug (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0c.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0c.1 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0c.2 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0c.3 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0c.4 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0c.5 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0c.6 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0c.7 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0f.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0f.1 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0f.4 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0f.5 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:0f.6 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:10.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R2PCIe Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R2PCIe Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:10.1 Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R2PCIe Agent (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R2PCIe Agent
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:10.5 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:10.6 Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:10.7 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:12.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Home Agent 0 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Home Agent 0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:12.1 Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Home Agent 0 (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Home Agent 0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:13.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Target Address/Thermal/RAS (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Target Address/Thermal/RAS
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
ff:13.1 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Target Address/Thermal/RAS (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Target Address/Thermal/RAS
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
ff:13.2 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
ff:13.3 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
ff:13.4 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
ff:13.5 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
ff:13.6 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Broadcast (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:13.7 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Global Broadcast (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:14.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 0 Thermal Control (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 0 Thermal Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
ff:14.1 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 1 Thermal Control (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 1 Thermal Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
ff:14.2 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 0 Error (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 0 Error
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
ff:14.3 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 1 Error (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 1 Error
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
ff:14.4 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:14.5 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:14.6 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:14.7 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:15.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 2 Thermal Control (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 2 Thermal Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
ff:15.1 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 3 Thermal Control (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 3 Thermal Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
ff:15.2 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 2 Error (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 2 Error
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
ff:15.3 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 3 Error (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 3 Error
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
ff:16.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Target Address/Thermal/RAS (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] #00 [0000]
ff:16.6 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 2/3 Broadcast (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:16.7 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Global Broadcast (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:17.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 1 - Channel 0 Thermal Control (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] #00 [0000]
ff:17.4 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 2/3 Interface (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:17.5 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 2/3 Interface (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:17.6 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 2/3 Interface (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:17.7 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 2/3 Interface (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:1e.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:1e.1 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:1e.2 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:1e.3 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at <ignored> [disabled]
ff:1e.4 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 01)
Subsystem: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:1f.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
ff:1f.2 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
[-- Attachment #1.1.5: cknowsvr01-xlinfo-xldmesg.txt --]
[-- Type: text/plain, Size: 27710 bytes --]
root@cknowsvr01:/home/diederik# xl info
host : cknowsvr01
release : 4.8.0-2-amd64
version : #1 SMP Debian 4.8.15-2 (2017-01-04)
machine : x86_64
nr_cpus : 32
max_cpu_id : 31
nr_nodes : 2
cores_per_socket : 8
threads_per_core : 2
cpu_mhz : 2095
hw_caps : b7ebfbff:77fef3ff:2c100800:00000121:00000001:001cbfbb:00000000:00000100
virt_caps : hvm hvm_directio
total_memory : 130972
free_memory : 121102
sharing_freed_memory : 0
sharing_used_memory : 0
outstanding_claims : 0
free_cpus : 0
xen_major : 4
xen_minor : 8
xen_extra : .0
xen_version : 4.8.0
xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64
xen_scheduler : credit
xen_pagesize : 4096
platform_params : virt_start=0xffff800000000000
xen_changeset :
xen_commandline : placeholder dom0_mem=8G,max:8G iommu=verbose,debug loglvl=all guest_loglvl=all
cc_compiler : gcc (Debian 6.2.1-7) 6.2.1 20161215
cc_compile_by : ian.jackson
cc_compile_domain : eu.citrix.com
cc_compile_date : Thu Dec 22 18:03:41 UTC 2016
build_id : c8b753ce66a22831cdf39f5624a3365352d37a44
xend_config_format : 4
root@cknowsvr01:/home/diederik# xl dmesg
(XEN) Xen version 4.8.0 (Debian 4.8.0-1) (ian.jackson@eu.citrix.com) (gcc (Debian 6.2.1-7) 6.2.1 20161215) debug=n Thu Dec 22 18:03:41 UTC 2016
(XEN) Bootloader: GRUB 2.02~beta3-3
(XEN) Command line: placeholder dom0_mem=8G,max:8G iommu=verbose,debug loglvl=all guest_loglvl=all
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 5 MBR signatures
(XEN) Found 5 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009e800 (usable)
(XEN) 000000000009e800 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 0000000079cfc000 (usable)
(XEN) 0000000079cfc000 - 000000007b8c2000 (reserved)
(XEN) 000000007b8c2000 - 000000007b935000 (ACPI data)
(XEN) 000000007b935000 - 000000007bee0000 (ACPI NVS)
(XEN) 000000007bee0000 - 0000000090000000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed45000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000002080000000 (usable)
(XEN) ACPI: RSDP 000F0580, 0024 (r2 ALASKA)
(XEN) ACPI: XSDT 7B8EA0B0, 00D4 (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FACP 7B919410, 010C (r5 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: DSDT 7B8EA218, 2F1F7 (r2 ALASKA A M I 1072009 INTL 20091013)
(XEN) ACPI: FACS 7BEDEF80, 0040
(XEN) ACPI: APIC 7B919520, 0224 (r3 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FPDT 7B919748, 0044 (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: FIDT 7B919790, 009C (r1 ALASKA A M I 1072009 AMI 10013)
(XEN) ACPI: MCFG 7B919830, 003C (r1 ALASKA A M I 1072009 MSFT 97)
(XEN) ACPI: EINJ 7B9347D0, 0130 (r1 ALASKA A M I 1 INTL 1)
(XEN) ACPI: UEFI 7B9198C8, 0042 (r1 ALASKA A M I 1072009 0)
(XEN) ACPI: HPET 7B919910, 0038 (r1 ALASKA A M I 1 INTL 20091013)
(XEN) ACPI: MSCT 7B919948, 0090 (r1 ALASKA A M I 1 INTL 20091013)
(XEN) ACPI: SLIT 7B9199D8, 0030 (r1 ALASKA A M I 1 INTL 20091013)
(XEN) ACPI: SRAT 7B919A08, 1158 (r3 ALASKA A M I 1 INTL 20091013)
(XEN) ACPI: WDDT 7B91AB60, 0040 (r1 ALASKA A M I 0 INTL 20091013)
(XEN) ACPI: SSDT 7B91ABA0, 16FB3 (r2 ALASKA PmMgt 1 INTL 20120913)
(XEN) ACPI: NITR 7B931B58, 0071 (r2 ALASKA A M I 1 INTL 20091013)
(XEN) ACPI: SPMI 7B931BD0, 0041 (r5 ALASKA A M I 0 AMI. 0)
(XEN) ACPI: SSDT 7B931C18, 2652 (r2 ALASKA SpsNm 2 INTL 20120913)
(XEN) ACPI: SSDT 7B934270, 0064 (r2 ALASKA SpsNvs 2 INTL 20120913)
(XEN) ACPI: PRAD 7B9342D8, 0102 (r2 ALASKA A M I 2 INTL 20120913)
(XEN) ACPI: DMAR 7B9343E0, 00E8 (r1 ALASKA A M I 1 INTL 20091013)
(XEN) ACPI: HEST 7B9344C8, 00A8 (r1 ALASKA A M I 1 INTL 1)
(XEN) ACPI: BERT 7B934570, 0030 (r1 ALASKA A M I 1 INTL 1)
(XEN) ACPI: ERST 7B9345A0, 0230 (r1 ALASKA A M I 1 INTL 1)
(XEN) System RAM: 130972MB (134115944kB)
(XEN) SRAT: PXM 0 -> APIC 00 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 02 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 04 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 06 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 08 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 0a -> Node 0
(XEN) SRAT: PXM 0 -> APIC 0c -> Node 0
(XEN) SRAT: PXM 0 -> APIC 0e -> Node 0
(XEN) SRAT: PXM 1 -> APIC 10 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 12 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 14 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 16 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 18 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 1a -> Node 1
(XEN) SRAT: PXM 1 -> APIC 1c -> Node 1
(XEN) SRAT: PXM 1 -> APIC 1e -> Node 1
(XEN) SRAT: PXM 0 -> APIC 01 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 03 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 05 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 07 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 09 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 0b -> Node 0
(XEN) SRAT: PXM 0 -> APIC 0d -> Node 0
(XEN) SRAT: PXM 0 -> APIC 0f -> Node 0
(XEN) SRAT: PXM 1 -> APIC 11 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 13 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 15 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 17 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 19 -> Node 1
(XEN) SRAT: PXM 1 -> APIC 1b -> Node 1
(XEN) SRAT: PXM 1 -> APIC 1d -> Node 1
(XEN) SRAT: PXM 1 -> APIC 1f -> Node 1
(XEN) SRAT: Node 0 PXM 0 0-80000000
(XEN) SRAT: Node 0 PXM 0 100000000-1080000000
(XEN) SRAT: Node 1 PXM 1 1080000000-2080000000
(XEN) NUMA: Allocated memnodemap from 207d1fc000 - 207d1fd000
(XEN) NUMA: Using 19 for the hash shift.
(XEN) Domain heap initialised DMA width 32 bits
(XEN) CPU Vendor: Intel, Family 6 (0x6), Model 79 (0x4f), Stepping 1 (raw 000406f1)
(XEN) found SMP MP-table at 000fdba0
(XEN) DMI 2.8 present.
(XEN) x2APIC mode is already enabled by BIOS.
(XEN) Using APIC driver x2apic_cluster
(XEN) ACPI: PM-Timer IO Port: 0x408 (32 bits)
(XEN) ACPI: v5 SLEEP INFO: control[0:0], status[0:0]
(XEN) ACPI: SLEEP INFO: pm1x_cnt[1:404,1:0], pm1x_evt[1:400,1:0]
(XEN) ACPI: 32/64X FACS address mismatch in FADT - 7bedef80/0000000000000000, using 32
(XEN) ACPI: wakeup_vec[7bedef8c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x10] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x12] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x14] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x16] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x18] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x1a] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x1c] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x1e] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x11] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x13] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x15] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x17] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x19] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1b] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x1d] enabled)
(XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x1f] enabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
(XEN) ACPI: IOAPIC (id[0x03] address[0xfec40000] gsi_base[48])
(XEN) IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) [VT-D]Host address width 46
(XEN) [VT-D]found ACPI_DMAR_DRHD:
(XEN) [VT-D] dmaru->address = fbffc000
(XEN) [VT-D]drhd->address = fbffc000 iommu->reg = ffff82c000201000
(XEN) [VT-D]cap = 8d2078c106f0466 ecap = f020df
(XEN) [VT-D] IOAPIC: 0000:80:05.4
(XEN) [VT-D]found ACPI_DMAR_DRHD:
(XEN) [VT-D] dmaru->address = c7ffc000
(XEN) [VT-D]drhd->address = c7ffc000 iommu->reg = ffff82c000203000
(XEN) [VT-D]cap = 8d2078c106f0466 ecap = f020df
(XEN) [VT-D] IOAPIC: 0000:f0:1f.7
(XEN) [VT-D] IOAPIC: 0000:00:05.4
(XEN) [VT-D] MSI HPET: 0000:f0:0f.0
(XEN) [VT-D] flags: INCLUDE_ALL
(XEN) [VT-D]found ACPI_DMAR_RMRR:
(XEN) [VT-D] endpoint: 0000:00:14.0
(XEN) [VT-D] endpoint: 0000:00:1a.0
(XEN) [VT-D] endpoint: 0000:00:1d.0
(XEN) [VT-D] RMRR region: base_addr 7db86000 end_address 7db95fff
(XEN) [VT-D]found ACPI_DMAR_ATSR:
(XEN) [VT-D] atsru->all_ports: 0
(XEN) [VT-D] bridge: 0000:00:01.0 start=0 sec=1 sub=1
(XEN) [VT-D] bridge: 0000:00:02.0 start=0 sec=2 sub=2
(XEN) [VT-D] bridge: 0000:00:03.0 start=0 sec=3 sub=3
(XEN) [VT-D]found ACPI_DMAR_RHSA:
(XEN) [VT-D] rhsau->address: c7ffc000 rhsau->proximity_domain: 0
(XEN) [VT-D]found ACPI_DMAR_RHSA:
(XEN) [VT-D] rhsau->address: fbffc000 rhsau->proximity_domain: 1
(XEN) Xen ERST support is initialized.
(XEN) HEST: Table parsing has been initialized
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 32 CPUs (0 hotplug CPUs)
(XEN) IRQ limits: 72 GSI, 6088 MSI/MSI-X
(XEN) Switched to APIC driver x2apic_cluster.
(XEN) xstate: size: 0x340 and states: 0x7
(XEN) CMCI: threshold 0x2 too large for CPU0 bank 17, using 0x1
(XEN) CMCI: threshold 0x2 too large for CPU0 bank 18, using 0x1
(XEN) CMCI: threshold 0x2 too large for CPU0 bank 19, using 0x1
(XEN) Intel machine check reporting enabled
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Platform timer is 14.318MHz HPET
(XEN) Detected 2095.159 MHz processor.
(XEN) Initing memory sharing.
(XEN) alt table ffff82d0802baf38 -> ffff82d0802bc564
(XEN) PCI: MCFG configuration 0: base 80000000 segment 0000 buses 00 - ff
(XEN) PCI: MCFG area at 80000000 reserved in E820
(XEN) PCI: Using MCFG for segment 0000 bus 00-ff
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB, 2MB, 1GB.
(XEN) Intel VT-d iommu 1 supported page sizes: 4kB, 2MB, 1GB.
(XEN) Intel VT-d Snoop Control enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) Intel VT-d Posted Interrupt not enabled.
(XEN) Intel VT-d Shared EPT tables enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) nr_sockets: 2
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) TSC deadline timer enabled
(XEN) Defaulting to alternative key handling; send 'A' to switch to normal mode.
(XEN) Allocated console ring of 256 KiB.
(XEN) mwait-idle: MWAIT substates: 0x2120
(XEN) mwait-idle: v0.4.1 model 0x4f
(XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) - APIC Register Virtualization
(XEN) - Virtual Interrupt Delivery
(XEN) - Posted Interrupt Processing
(XEN) - VMCS shadowing
(XEN) - VM Functions
(XEN) - Virtualisation Exceptions
(XEN) - Page Modification Logging
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) CMCI: threshold 0x2 too large for CPU16 bank 17, using 0x1
(XEN) CMCI: threshold 0x2 too large for CPU16 bank 18, using 0x1
(XEN) CMCI: threshold 0x2 too large for CPU16 bank 19, using 0x1
(XEN) Brought up 32 CPUs
(XEN) build-id: c8b753ce66a22831cdf39f5624a3365352d37a44
(XEN) ACPI sleep modes: S3
(XEN) VPMU: disabled
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) Dom0 has maximum 1224 PIRQs
(XEN) NX (Execute Disable) protection active
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1d6b000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000202e000000->0000002030000000 (2084048 pages to be allocated)
(XEN) Init. ramdisk: 000000207ecd0000->000000207ffffbda
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81d6b000
(XEN) Init. ramdisk: 0000000000000000->0000000000000000
(XEN) Phys-Mach map: 0000008000000000->0000008001000000
(XEN) Start info: ffffffff81d6b000->ffffffff81d6b4b4
(XEN) Page tables: ffffffff81d6c000->ffffffff81d7f000
(XEN) Boot stack: ffffffff81d7f000->ffffffff81d80000
(XEN) TOTAL: ffffffff80000000->ffffffff82000000
(XEN) ENTRY ADDRESS: ffffffff81b35180
(XEN) Dom0 has maximum 32 VCPUs
(XEN) [VT-D]d0:Hostbridge: skip 0000:00:00.0 map
(XEN) [VT-D]d0:PCIe: map 0000:00:05.0
(XEN) [VT-D]d0:PCIe: map 0000:00:05.1
(XEN) [VT-D]d0:PCIe: map 0000:00:05.2
(XEN) [VT-D]d0:PCIe: map 0000:00:05.4
(XEN) [VT-D]d0:PCIe: map 0000:00:11.0
(XEN) [VT-D]d0:PCI: map 0000:00:11.4
(XEN) [VT-D]d0:PCI: map 0000:00:14.0
(XEN) [VT-D]d0:PCI: map 0000:00:16.0
(XEN) [VT-D]d0:PCI: map 0000:00:16.1
(XEN) [VT-D]d0:PCI: map 0000:00:1a.0
(XEN) [VT-D]d0:PCI: map 0000:00:1d.0
(XEN) [VT-D]d0:PCI: map 0000:00:1f.0
(XEN) [VT-D]d0:PCI: map 0000:00:1f.2
(XEN) [VT-D]d0:PCI: map 0000:00:1f.3
(XEN) [VT-D]d0:PCIe: map 0000:02:00.0
(XEN) [VT-D]d0:PCIe: map 0000:02:00.1
(XEN) [VT-D]d0:PCIe: map 0000:05:00.0
(XEN) [VT-D]d0:PCIe: map 0000:06:00.0
(XEN) [VT-D]d0:PCI: map 0000:7f:08.0
(XEN) [VT-D]d0:PCI: map 0000:7f:08.2
(XEN) [VT-D]d0:PCIe: map 0000:7f:08.3
(XEN) [VT-D]d0:PCI: map 0000:7f:09.0
(XEN) [VT-D]d0:PCI: map 0000:7f:09.2
(XEN) [VT-D]d0:PCIe: map 0000:7f:09.3
(XEN) [VT-D]d0:PCI: map 0000:7f:0b.0
(XEN) [VT-D]d0:PCI: map 0000:7f:0b.1
(XEN) [VT-D]d0:PCI: map 0000:7f:0b.2
(XEN) [VT-D]d0:PCI: map 0000:7f:0b.3
(XEN) [VT-D]d0:PCI: map 0000:7f:0c.0
(XEN) [VT-D]d0:PCI: map 0000:7f:0c.1
(XEN) [VT-D]d0:PCI: map 0000:7f:0c.2
(XEN) [VT-D]d0:PCI: map 0000:7f:0c.3
(XEN) [VT-D]d0:PCI: map 0000:7f:0c.4
(XEN) [VT-D]d0:PCI: map 0000:7f:0c.5
(XEN) [VT-D]d0:PCI: map 0000:7f:0c.6
(XEN) [VT-D]d0:PCI: map 0000:7f:0c.7
(XEN) [VT-D]d0:PCI: map 0000:7f:0f.0
(XEN) [VT-D]d0:PCI: map 0000:7f:0f.1
(XEN) [VT-D]d0:PCI: map 0000:7f:0f.4
(XEN) [VT-D]d0:PCI: map 0000:7f:0f.5
(XEN) [VT-D]d0:PCI: map 0000:7f:0f.6
(XEN) [VT-D]d0:PCI: map 0000:7f:10.0
(XEN) [VT-D]d0:PCI: map 0000:7f:10.1
(XEN) [VT-D]d0:PCI: map 0000:7f:10.5
(XEN) [VT-D]d0:PCI: map 0000:7f:10.6
(XEN) [VT-D]d0:PCI: map 0000:7f:10.7
(XEN) [VT-D]d0:PCI: map 0000:7f:12.0
(XEN) [VT-D]d0:PCI: map 0000:7f:12.1
(XEN) [VT-D]d0:PCIe: map 0000:7f:13.0
(XEN) [VT-D]d0:PCIe: map 0000:7f:13.1
(XEN) [VT-D]d0:PCIe: map 0000:7f:13.2
(XEN) [VT-D]d0:PCIe: map 0000:7f:13.3
(XEN) [VT-D]d0:PCIe: map 0000:7f:13.4
(XEN) [VT-D]d0:PCIe: map 0000:7f:13.5
(XEN) [VT-D]d0:PCI: map 0000:7f:13.6
(XEN) [VT-D]d0:PCI: map 0000:7f:13.7
(XEN) [VT-D]d0:PCIe: map 0000:7f:14.0
(XEN) [VT-D]d0:PCIe: map 0000:7f:14.1
(XEN) [VT-D]d0:PCIe: map 0000:7f:14.2
(XEN) [VT-D]d0:PCIe: map 0000:7f:14.3
(XEN) [VT-D]d0:PCI: map 0000:7f:14.4
(XEN) [VT-D]d0:PCI: map 0000:7f:14.5
(XEN) [VT-D]d0:PCI: map 0000:7f:14.6
(XEN) [VT-D]d0:PCI: map 0000:7f:14.7
(XEN) [VT-D]d0:PCIe: map 0000:7f:15.0
(XEN) [VT-D]d0:PCIe: map 0000:7f:15.1
(XEN) [VT-D]d0:PCIe: map 0000:7f:15.2
(XEN) [VT-D]d0:PCIe: map 0000:7f:15.3
(XEN) [VT-D]d0:PCI: map 0000:7f:16.0
(XEN) [VT-D]d0:PCI: map 0000:7f:16.6
(XEN) [VT-D]d0:PCI: map 0000:7f:16.7
(XEN) [VT-D]d0:PCI: map 0000:7f:17.0
(XEN) [VT-D]d0:PCI: map 0000:7f:17.4
(XEN) [VT-D]d0:PCI: map 0000:7f:17.5
(XEN) [VT-D]d0:PCI: map 0000:7f:17.6
(XEN) [VT-D]d0:PCI: map 0000:7f:17.7
(XEN) [VT-D]d0:PCI: map 0000:7f:1e.0
(XEN) [VT-D]d0:PCI: map 0000:7f:1e.1
(XEN) [VT-D]d0:PCI: map 0000:7f:1e.2
(XEN) [VT-D]d0:PCI: map 0000:7f:1e.3
(XEN) [VT-D]d0:PCI: map 0000:7f:1e.4
(XEN) [VT-D]d0:PCI: map 0000:7f:1f.0
(XEN) [VT-D]d0:PCI: map 0000:7f:1f.2
(XEN) [VT-D]d0:PCIe: map 0000:80:05.0
(XEN) [VT-D]d0:PCIe: map 0000:80:05.1
(XEN) [VT-D]d0:PCIe: map 0000:80:05.2
(XEN) [VT-D]d0:PCIe: map 0000:80:05.4
(XEN) [VT-D]d0:PCI: map 0000:ff:08.0
(XEN) [VT-D]d0:PCI: map 0000:ff:08.2
(XEN) [VT-D]d0:PCIe: map 0000:ff:08.3
(XEN) [VT-D]d0:PCI: map 0000:ff:09.0
(XEN) [VT-D]d0:PCI: map 0000:ff:09.2
(XEN) [VT-D]d0:PCIe: map 0000:ff:09.3
(XEN) [VT-D]d0:PCI: map 0000:ff:0b.0
(XEN) [VT-D]d0:PCI: map 0000:ff:0b.1
(XEN) [VT-D]d0:PCI: map 0000:ff:0b.2
(XEN) [VT-D]d0:PCI: map 0000:ff:0b.3
(XEN) [VT-D]d0:PCI: map 0000:ff:0c.0
(XEN) [VT-D]d0:PCI: map 0000:ff:0c.1
(XEN) [VT-D]d0:PCI: map 0000:ff:0c.2
(XEN) [VT-D]d0:PCI: map 0000:ff:0c.3
(XEN) [VT-D]d0:PCI: map 0000:ff:0c.4
(XEN) [VT-D]d0:PCI: map 0000:ff:0c.5
(XEN) [VT-D]d0:PCI: map 0000:ff:0c.6
(XEN) [VT-D]d0:PCI: map 0000:ff:0c.7
(XEN) [VT-D]d0:PCI: map 0000:ff:0f.0
(XEN) [VT-D]d0:PCI: map 0000:ff:0f.1
(XEN) [VT-D]d0:PCI: map 0000:ff:0f.4
(XEN) [VT-D]d0:PCI: map 0000:ff:0f.5
(XEN) [VT-D]d0:PCI: map 0000:ff:0f.6
(XEN) [VT-D]d0:PCI: map 0000:ff:10.0
(XEN) [VT-D]d0:PCI: map 0000:ff:10.1
(XEN) [VT-D]d0:PCI: map 0000:ff:10.5
(XEN) [VT-D]d0:PCI: map 0000:ff:10.6
(XEN) [VT-D]d0:PCI: map 0000:ff:10.7
(XEN) [VT-D]d0:PCI: map 0000:ff:12.0
(XEN) [VT-D]d0:PCI: map 0000:ff:12.1
(XEN) [VT-D]d0:PCIe: map 0000:ff:13.0
(XEN) [VT-D]d0:PCIe: map 0000:ff:13.1
(XEN) [VT-D]d0:PCIe: map 0000:ff:13.2
(XEN) [VT-D]d0:PCIe: map 0000:ff:13.3
(XEN) [VT-D]d0:PCIe: map 0000:ff:13.4
(XEN) [VT-D]d0:PCIe: map 0000:ff:13.5
(XEN) [VT-D]d0:PCI: map 0000:ff:13.6
(XEN) [VT-D]d0:PCI: map 0000:ff:13.7
(XEN) [VT-D]d0:PCIe: map 0000:ff:14.0
(XEN) [VT-D]d0:PCIe: map 0000:ff:14.1
(XEN) [VT-D]d0:PCIe: map 0000:ff:14.2
(XEN) [VT-D]d0:PCIe: map 0000:ff:14.3
(XEN) [VT-D]d0:PCI: map 0000:ff:14.4
(XEN) [VT-D]d0:PCI: map 0000:ff:14.5
(XEN) [VT-D]d0:PCI: map 0000:ff:14.6
(XEN) [VT-D]d0:PCI: map 0000:ff:14.7
(XEN) [VT-D]d0:PCIe: map 0000:ff:15.0
(XEN) [VT-D]d0:PCIe: map 0000:ff:15.1
(XEN) [VT-D]d0:PCIe: map 0000:ff:15.2
(XEN) [VT-D]d0:PCIe: map 0000:ff:15.3
(XEN) [VT-D]d0:PCI: map 0000:ff:16.0
(XEN) [VT-D]d0:PCI: map 0000:ff:16.6
(XEN) [VT-D]d0:PCI: map 0000:ff:16.7
(XEN) [VT-D]d0:PCI: map 0000:ff:17.0
(XEN) [VT-D]d0:PCI: map 0000:ff:17.4
(XEN) [VT-D]d0:PCI: map 0000:ff:17.5
(XEN) [VT-D]d0:PCI: map 0000:ff:17.6
(XEN) [VT-D]d0:PCI: map 0000:ff:17.7
(XEN) [VT-D]d0:PCI: map 0000:ff:1e.0
(XEN) [VT-D]d0:PCI: map 0000:ff:1e.1
(XEN) [VT-D]d0:PCI: map 0000:ff:1e.2
(XEN) [VT-D]d0:PCI: map 0000:ff:1e.3
(XEN) [VT-D]d0:PCI: map 0000:ff:1e.4
(XEN) [VT-D]d0:PCI: map 0000:ff:1f.0
(XEN) [VT-D]d0:PCI: map 0000:ff:1f.2
(XEN) [VT-D]iommu_enable_translation: iommu->reg = ffff82c000201000
(XEN) [VT-D]iommu_enable_translation: iommu->reg = ffff82c000203000
(XEN) Scrubbing Free RAM on 2 nodes using 16 CPUs
(XEN) ..................................................................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 312kB init memory
(XEN) PCI add device 0000:ff:08.0
(XEN) PCI add device 0000:ff:08.2
(XEN) PCI add device 0000:ff:08.3
(XEN) PCI add device 0000:ff:09.0
(XEN) PCI add device 0000:ff:09.2
(XEN) PCI add device 0000:ff:09.3
(XEN) PCI add device 0000:ff:0b.0
(XEN) PCI add device 0000:ff:0b.1
(XEN) PCI add device 0000:ff:0b.2
(XEN) PCI add device 0000:ff:0b.3
(XEN) PCI add device 0000:ff:0c.0
(XEN) PCI add device 0000:ff:0c.1
(XEN) PCI add device 0000:ff:0c.2
(XEN) PCI add device 0000:ff:0c.3
(XEN) PCI add device 0000:ff:0c.4
(XEN) PCI add device 0000:ff:0c.5
(XEN) PCI add device 0000:ff:0c.6
(XEN) PCI add device 0000:ff:0c.7
(XEN) PCI add device 0000:ff:0f.0
(XEN) PCI add device 0000:ff:0f.1
(XEN) PCI add device 0000:ff:0f.4
(XEN) PCI add device 0000:ff:0f.5
(XEN) PCI add device 0000:ff:0f.6
(XEN) PCI add device 0000:ff:10.0
(XEN) PCI add device 0000:ff:10.1
(XEN) PCI add device 0000:ff:10.5
(XEN) PCI add device 0000:ff:10.6
(XEN) PCI add device 0000:ff:10.7
(XEN) PCI add device 0000:ff:12.0
(XEN) PCI add device 0000:ff:12.1
(XEN) PCI add device 0000:ff:13.0
(XEN) PCI add device 0000:ff:13.1
(XEN) PCI add device 0000:ff:13.2
(XEN) PCI add device 0000:ff:13.3
(XEN) PCI add device 0000:ff:13.4
(XEN) PCI add device 0000:ff:13.5
(XEN) PCI add device 0000:ff:13.6
(XEN) PCI add device 0000:ff:13.7
(XEN) PCI add device 0000:ff:14.0
(XEN) PCI add device 0000:ff:14.1
(XEN) PCI add device 0000:ff:14.2
(XEN) PCI add device 0000:ff:14.3
(XEN) PCI add device 0000:ff:14.4
(XEN) PCI add device 0000:ff:14.5
(XEN) PCI add device 0000:ff:14.6
(XEN) PCI add device 0000:ff:14.7
(XEN) PCI add device 0000:ff:15.0
(XEN) PCI add device 0000:ff:15.1
(XEN) PCI add device 0000:ff:15.2
(XEN) PCI add device 0000:ff:15.3
(XEN) PCI add device 0000:ff:16.0
(XEN) PCI add device 0000:ff:16.6
(XEN) PCI add device 0000:ff:16.7
(XEN) PCI add device 0000:ff:17.0
(XEN) PCI add device 0000:ff:17.4
(XEN) PCI add device 0000:ff:17.5
(XEN) PCI add device 0000:ff:17.6
(XEN) PCI add device 0000:ff:17.7
(XEN) PCI add device 0000:ff:1e.0
(XEN) PCI add device 0000:ff:1e.1
(XEN) PCI add device 0000:ff:1e.2
(XEN) PCI add device 0000:ff:1e.3
(XEN) PCI add device 0000:ff:1e.4
(XEN) PCI add device 0000:ff:1f.0
(XEN) PCI add device 0000:ff:1f.2
(XEN) PCI add device 0000:7f:08.0
(XEN) PCI add device 0000:7f:08.2
(XEN) PCI add device 0000:7f:08.3
(XEN) PCI add device 0000:7f:09.0
(XEN) PCI add device 0000:7f:09.2
(XEN) PCI add device 0000:7f:09.3
(XEN) PCI add device 0000:7f:0b.0
(XEN) PCI add device 0000:7f:0b.1
(XEN) PCI add device 0000:7f:0b.2
(XEN) PCI add device 0000:7f:0b.3
(XEN) PCI add device 0000:7f:0c.0
(XEN) PCI add device 0000:7f:0c.1
(XEN) PCI add device 0000:7f:0c.2
(XEN) PCI add device 0000:7f:0c.3
(XEN) PCI add device 0000:7f:0c.4
(XEN) PCI add device 0000:7f:0c.5
(XEN) PCI add device 0000:7f:0c.6
(XEN) PCI add device 0000:7f:0c.7
(XEN) PCI add device 0000:7f:0f.0
(XEN) PCI add device 0000:7f:0f.1
(XEN) PCI add device 0000:7f:0f.4
(XEN) PCI add device 0000:7f:0f.5
(XEN) PCI add device 0000:7f:0f.6
(XEN) PCI add device 0000:7f:10.0
(XEN) PCI add device 0000:7f:10.1
(XEN) PCI add device 0000:7f:10.5
(XEN) PCI add device 0000:7f:10.6
(XEN) PCI add device 0000:7f:10.7
(XEN) PCI add device 0000:7f:12.0
(XEN) PCI add device 0000:7f:12.1
(XEN) PCI add device 0000:7f:13.0
(XEN) PCI add device 0000:7f:13.1
(XEN) PCI add device 0000:7f:13.2
(XEN) PCI add device 0000:7f:13.3
(XEN) PCI add device 0000:7f:13.4
(XEN) PCI add device 0000:7f:13.5
(XEN) PCI add device 0000:7f:13.6
(XEN) PCI add device 0000:7f:13.7
(XEN) PCI add device 0000:7f:14.0
(XEN) PCI add device 0000:7f:14.1
(XEN) PCI add device 0000:7f:14.2
(XEN) PCI add device 0000:7f:14.3
(XEN) PCI add device 0000:7f:14.4
(XEN) PCI add device 0000:7f:14.5
(XEN) PCI add device 0000:7f:14.6
(XEN) PCI add device 0000:7f:14.7
(XEN) PCI add device 0000:7f:15.0
(XEN) PCI add device 0000:7f:15.1
(XEN) PCI add device 0000:7f:15.2
(XEN) PCI add device 0000:7f:15.3
(XEN) PCI add device 0000:7f:16.0
(XEN) PCI add device 0000:7f:16.6
(XEN) PCI add device 0000:7f:16.7
(XEN) PCI add device 0000:7f:17.0
(XEN) PCI add device 0000:7f:17.4
(XEN) PCI add device 0000:7f:17.5
(XEN) PCI add device 0000:7f:17.6
(XEN) PCI add device 0000:7f:17.7
(XEN) PCI add device 0000:7f:1e.0
(XEN) PCI add device 0000:7f:1e.1
(XEN) PCI add device 0000:7f:1e.2
(XEN) PCI add device 0000:7f:1e.3
(XEN) PCI add device 0000:7f:1e.4
(XEN) PCI add device 0000:7f:1f.0
(XEN) PCI add device 0000:7f:1f.2
(XEN) PCI add device 0000:00:00.0
(XEN) PCI add device 0000:00:01.0
(XEN) PCI add device 0000:00:02.0
(XEN) PCI add device 0000:00:03.0
(XEN) PCI add device 0000:00:05.0
(XEN) PCI add device 0000:00:05.1
(XEN) PCI add device 0000:00:05.2
(XEN) PCI add device 0000:00:05.4
(XEN) PCI add device 0000:00:11.0
(XEN) PCI add device 0000:00:11.4
(XEN) PCI add device 0000:00:14.0
(XEN) PCI add device 0000:00:16.0
(XEN) PCI add device 0000:00:16.1
(XEN) PCI add device 0000:00:1a.0
(XEN) PCI add device 0000:00:1c.0
(XEN) PCI add device 0000:00:1c.4
(XEN) PCI add device 0000:00:1c.5
(XEN) PCI add device 0000:00:1d.0
(XEN) PCI add device 0000:00:1f.0
(XEN) PCI add device 0000:00:1f.2
(XEN) PCI add device 0000:00:1f.3
(XEN) PCI add device 0000:02:00.0
(XEN) PCI add device 0000:02:00.1
(XEN) PCI add device 0000:05:00.0
(XEN) PCI add device 0000:06:00.0
(XEN) PCI add device 0000:80:05.0
(XEN) PCI add device 0000:80:05.1
(XEN) PCI add device 0000:80:05.2
(XEN) PCI add device 0000:80:05.4
[-- Attachment #1.1.6: cknowsvr01-kernel-config.txt --]
[-- Type: text/plain, Size: 1915 bytes --]
root@cknowsvr01:/home/diederik# cat /etc/modprobe.d/vga-passthrough.conf
blacklist amdgpu
options xen-pciback hide=(02:00.0)(02:00.1)
root@cknowsvr01:/home/diederik# cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
loop
xen-pciback
root@cknowsvr01:/home/diederik# lsmod | grep amd
root@cknowsvr01:/home/diederik# lsmod | grep xen
xen_netback 57344 1
xen_blkback 45056 0
xen_gntdev 20480 3
xen_evtchn 16384 5
xenfs 16384 1
xen_privcmd 16384 15 xenfs
xen_pciback 61440 0
root@cknowsvr01:/home/diederik# grep -i xen /boot/config-4.8.0-2-amd64
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_512GB=y
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
CONFIG_XEN_PVH=y
CONFIG_PCI_XEN=y
CONFIG_XEN_PCIDEV_FRONTEND=m
CONFIG_XEN_BLKDEV_FRONTEND=m
CONFIG_XEN_BLKDEV_BACKEND=m
CONFIG_XEN_SCSI_FRONTEND=m
CONFIG_NETXEN_NIC=m
CONFIG_XEN_NETDEV_FRONTEND=m
CONFIG_XEN_NETDEV_BACKEND=m
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_TCG_XEN=m
CONFIG_XEN_WDT=m
CONFIG_XEN_FBDEV_FRONTEND=y
# Xen driver support
CONFIG_XEN_BALLOON=y
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG_LIMIT=512
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=m
CONFIG_XEN_GRANT_DEV_ALLOC=m
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=m
CONFIG_XEN_PCIDEV_BACKEND=m
CONFIG_XEN_SCSI_BACKEND=m
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_ACPI_PROCESSOR=m
CONFIG_XEN_MCE_LOG=y
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_SYMS=y
CONFIG_XEN_HAVE_VPMU=y
[-- Attachment #1.1.7: cknowsvr01-tradestation.home.cknow.org.cfg.txt --]
[-- Type: text/plain, Size: 1142 bytes --]
root@cknowsvr01:/home/diederik# cat /etc/xen/tradestation.home.cknow.org.cfg
#
# Configuration file for the Xen instance tradestation.home.cknow.org, created
# by xen-tools 4.6.2 on Sun Jan 8 12:58:13 2017.
#
#
# Kernel + memory size
#
kernel = '/boot/vmlinuz-4.8.0-2-amd64'
extra = 'elevator=noop xen-fbfront.video=32,1920,1080'
ramdisk = '/boot/initrd.img-4.8.0-2-amd64'
vcpus = '8'
memory = '16384'
# Use PVH mode
pvh = 1
#
# Disk device(s).
#
root = '/dev/xvda2 ro'
disk = [
'phy:/dev/vgXen/tradestation.home.cknow.org-disk,xvda2,w',
'phy:/dev/vgXen/tradestation.home.cknow.org-swap,xvda1,w',
]
#
# Physical volumes
#
#
# Hostname
#
name = 'tradestation.home.cknow.org'
#
# Networking
#
dhcp = 'dhcp'
vif = [ 'mac=00:16:3E:C3:B3:E8' ]
#
# Behaviour
#
on_poweroff = 'destroy'
on_reboot = 'restart'
on_crash = 'destroy'
# PCI devices
# pvh = 1 is likely needed for this
#gfx_passthru = 1
#pci = [ '02:00.0' ]
#pci = [ '02:00.1' ]
# VNC
vnc=1
vnclisten=""
vncpasswd=""
vga="stdvga"
videoram=64
[-- Attachment #1.1.8: cknowsvr01-xl-tradestation.home.cknow.org.log.txt --]
[-- Type: text/plain, Size: 4641 bytes --]
root@cknowsvr01:/home/diederik# cat /var/log/xen/xl-tradestation.home.cknow.org.log.5
Waiting for domain tradestation.home.cknow.org (domid 9) to die [pid 15641]
Domain 9 has shut down, reason code 3 0x3
Action for shutdown reason code 3 is restart
Domain 9 needs to be cleaned up: destroying the domain
libxl: error: libxl_pci.c:1151:libxl__device_pci_reset: The kernel doesn't support reset from sysfs for PCI device 0000:02:00.0
libxl: error: libxl_device.c:1356:libxl__wait_for_backend: Backend /local/domain/0/backend/pci/9/0 not ready
Done. Rebooting now
libxl: notice: libxl_numa.c:518:libxl__get_numa_candidate: NUMA placement failed, performance might be affected
libxl: error: libxl_qmp.c:287:qmp_handle_error_response: received an error message from QMP server: Could not set password
libxl: error: libxl_pci.c:1151:libxl__device_pci_reset: The kernel doesn't support reset from sysfs for PCI device 0000:02:00.0
Waiting for domain tradestation.home.cknow.org (domid 10) to die [pid 15641]
Domain 10 has shut down, reason code 3 0x3
Action for shutdown reason code 3 is restart
Domain 10 needs to be cleaned up: destroying the domain
libxl: error: libxl_pci.c:1151:libxl__device_pci_reset: The kernel doesn't support reset from sysfs for PCI device 0000:02:00.0
libxl: error: libxl_device.c:1356:libxl__wait_for_backend: Backend /local/domain/0/backend/pci/10/0 not ready
Done. Rebooting now
libxl: notice: libxl_numa.c:518:libxl__get_numa_candidate: NUMA placement failed, performance might be affected
libxl: error: libxl_qmp.c:287:qmp_handle_error_response: received an error message from QMP server: Could not set password
libxl: error: libxl_pci.c:1151:libxl__device_pci_reset: The kernel doesn't support reset from sysfs for PCI device 0000:02:00.0
Waiting for domain tradestation.home.cknow.org (domid 11) to die [pid 15641]
Domain 11 has shut down, reason code 3 0x3
Action for shutdown reason code 3 is restart
Domain 11 needs to be cleaned up: destroying the domain
libxl: error: libxl_pci.c:1151:libxl__device_pci_reset: The kernel doesn't support reset from sysfs for PCI device 0000:02:00.0
libxl: error: libxl_device.c:1356:libxl__wait_for_backend: Backend /local/domain/0/backend/pci/11/0 not ready
Done. Rebooting now
libxl: notice: libxl_numa.c:518:libxl__get_numa_candidate: NUMA placement failed, performance might be affected
libxl: error: libxl_qmp.c:287:qmp_handle_error_response: received an error message from QMP server: Could not set password
libxl: error: libxl_pci.c:1151:libxl__device_pci_reset: The kernel doesn't support reset from sysfs for PCI device 0000:02:00.0
Waiting for domain tradestation.home.cknow.org (domid 12) to die [pid 15641]
Domain 12 has shut down, reason code 3 0x3
Action for shutdown reason code 3 is restart
Domain 12 needs to be cleaned up: destroying the domain
libxl: error: libxl_pci.c:1151:libxl__device_pci_reset: The kernel doesn't support reset from sysfs for PCI device 0000:02:00.0
libxl: error: libxl_device.c:1356:libxl__wait_for_backend: Backend /local/domain/0/backend/pci/12/0 not ready
Done. Rebooting now
libxl: notice: libxl_numa.c:518:libxl__get_numa_candidate: NUMA placement failed, performance might be affected
libxl: error: libxl_qmp.c:287:qmp_handle_error_response: received an error message from QMP server: Could not set password
libxl: error: libxl_pci.c:1151:libxl__device_pci_reset: The kernel doesn't support reset from sysfs for PCI device 0000:02:00.0
Waiting for domain tradestation.home.cknow.org (domid 13) to die [pid 15641]
Domain 13 has shut down, reason code 3 0x3
Action for shutdown reason code 3 is restart
Domain 13 needs to be cleaned up: destroying the domain
libxl: error: libxl_pci.c:1151:libxl__device_pci_reset: The kernel doesn't support reset from sysfs for PCI device 0000:02:00.0
libxl: error: libxl_device.c:1356:libxl__wait_for_backend: Backend /local/domain/0/backend/pci/13/0 not ready
Done. Rebooting now
libxl: notice: libxl_numa.c:518:libxl__get_numa_candidate: NUMA placement failed, performance might be affected
libxl: error: libxl_qmp.c:287:qmp_handle_error_response: received an error message from QMP server: Could not set password
libxl: error: libxl_pci.c:1151:libxl__device_pci_reset: The kernel doesn't support reset from sysfs for PCI device 0000:02:00.0
Waiting for domain tradestation.home.cknow.org (domid 14) to die [pid 15641]
Domain 14 has shut down, reason code 3 0x3
Action for shutdown reason code 3 is restart
Domain 14 needs to be cleaned up: destroying the domain
libxl: error: libxl_pci.c:1151:libxl__device_pci_reset: The kernel doesn't support reset from sysfs for PCI device 0000:02:00.0
[-- Attachment #1.1.9: tradestation-kernel-config.txt --]
[-- Type: text/plain, Size: 534 bytes --]
diederik@tradestation:~$ ls -l /etc/modprobe.d/
total 0
diederik@tradestation:~$ cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
xen_pcifront
diederik@tradestation:~$ lsmod | grep amd
diederik@tradestation:~$ lsmod | grep xen
xen_pcifront 20480 0
xen_netfront 28672 0
xen_blkfront 36864 2
diederik@tradestation:~$ ls -l /boot/
total 0
[-- Attachment #1.2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 127 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 13+ messages in thread