All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v3] xen/arm: alternative: Register re-mapped Xen area as a temporary virtual region
@ 2017-03-27  8:40 Wei Chen
  2017-03-27 13:14 ` Konrad Rzeszutek Wilk
  2017-03-29 14:23 ` Julien Grall
  0 siblings, 2 replies; 7+ messages in thread
From: Wei Chen @ 2017-03-27  8:40 UTC (permalink / raw)
  To: xen-devel; +Cc: sstabellini, wei.chen, steve.capper, Kaly.Xin, julien.grall, nd

While I was using the alternative patching in the SErrors patch series [1].
I used a branch instruction as alternative instruction.

        ALTERNATIVE("nop",
                    "b skip_check",
                    SKIP_CHECK_PENDING_VSERROR)

Unfortunately, I got a system panic message with this code:

(XEN) build-id: f64081d86e7e88504b7d00e1486f25751c004e39
(XEN) alternatives: Patching with alt table 100b9480 -> 100b9498
(XEN) Xen BUG at alternative.c:61
(XEN) ----[ Xen-4.9-unstable  arm32  debug=y   Tainted:  C   ]----
(XEN) CPU:    0
(XEN) PC:     00252b68 alternative.c#__apply_alternatives+0x128/0x1d4
(XEN) CPSR:   800000da MODE:Hypervisor
(XEN)      R0: 00000000 R1: 00000000 R2: 100b9490 R3: 100b949c
(XEN)      R4: eafeff84 R5: 00000000 R6: 100b949c R7: 10079290
(XEN)      R8: 100792ac R9: 00000001 R10:100b948c R11:002cfe04 R12:002932c0
(XEN) HYP: SP: 002cfdc4 LR: 00239128
(XEN)
(XEN)   VTCR_EL2: 80003558
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd187f
(XEN)    HCR_EL2: 000000000038663f
(XEN)  TTBR0_EL2: 00000000bff09000
(XEN)
(XEN)    ESR_EL2: 00000000
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)      HDFAR: 00000000
(XEN)      HIFAR: 00000000
(XEN)
(XEN) Xen stack trace from sp=002cfdc4:
(XEN)    00000000 00294328 002e0004 00000001 10079290 002cfe14 100b9490 00000000
(XEN)    10010000 10122700 00200000 002cfe1c 00000080 00252c14 00000000 002cfe64
(XEN)    00252dd8 00000007 00000000 000bfe00 100b9480 100b9498 002cfe1c 002cfe1c
(XEN)    10010000 10122700 00000000 00000000 00000000 00000000 00000000 00000000
(XEN)    00000000 00000000 00000000 002ddf30 00000000 003113e8 0030f018 002cfe9c
(XEN)    00238914 00000002 00000000 00000000 00000000 0028b000 00000002 00293800
(XEN)    00000002 0030f238 00000002 00290640 00000001 002cfea4 002a2840 002cff54
(XEN)    002a65fc 11112131 10011142 00000000 0028d194 00000000 00000000 00000000
(XEN)    bdffb000 80000000 00000000 c0000000 00000000 00000002 00000000 c0000000
(XEN)    002b8060 00002000 002b8040 00000000 c0000000 bc000000 00000000 c0000000
(XEN)    00000000 be000000 00000000 00112701 00000000 bff12701 00000000 00000000
(XEN)    00000000 00000000 00000000 00000000 00000018 00000000 00000001 00000000
(XEN)    9fece000 80200000 80000000 00400000 00200550 00000000 00000000 00000000
(XEN)    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN)    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN)    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN)    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN)    00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) Xen call trace:
(XEN)    [<00252b68>] alternative.c#__apply_alternatives+0x128/0x1d4 (PC)
(XEN)    [<00239128>] is_active_kernel_text+0x10/0x28 (LR)
(XEN)    [<00252dd8>] alternative.c#__apply_alternatives_multi_stop+0x1c4/0x204
(XEN)    [<00238914>] stop_machine_run+0x1e8/0x254
(XEN)    [<002a2840>] apply_alternatives_all+0x38/0x54
(XEN)    [<002a65fc>] start_xen+0xcf4/0xf88
(XEN)    [<00200550>] arm32/head.o#paging+0x94/0xd8
(XEN)
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 0:
(XEN) Xen BUG at alternative.c:61
(XEN) ****************************************

This panic was triggered by the BUG(); in branch_insn_requires_update.
That's because in this case the alternative patching needs to update the
offset of the branch instruction. But the new target address of the branch
instruction could not pass the check of is_active_kernel_text();

The reason is that: When Xen is booting, it will call apply_alternatives_all
to do patching with alternative tables. In this progress, we should update
the offset of branch instructions if required. This means we should modify
the Xen text section. But Xen text section is marked as read-only and we
configure the hardware to not allow a region to be writable and executable at
the same time. So we re-map Xen in a temporary area for writing. In this case,
the calculation of the new target address of the branch instruction is based
on this re-mapped area. The new target address will point to a value in the
re-mapped area. But we haven't registered this area as an active kernel text.
So the check of is_active_kernel_text will always return false.

We have to register the re-mapped Xen area as a virtual region temporarily to
solve this problem.

1. https://lists.xenproject.org/archives/html/xen-devel/2017-03/msg01939.html

Signed-off-by: Wei Chen <Wei.Chen@arm.com>
---
Notes:
This bug will affect the staging, staging-4.8 and stable-4.8 source trees.

---
v2->v3
1. Fix typos.
2. Explain this bug only happening when booting Xen in commit message.

---
 xen/arch/arm/alternative.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/xen/arch/arm/alternative.c b/xen/arch/arm/alternative.c
index 1d10f51..96859fc 100644
--- a/xen/arch/arm/alternative.c
+++ b/xen/arch/arm/alternative.c
@@ -24,6 +24,7 @@
 #include <xen/vmap.h>
 #include <xen/smp.h>
 #include <xen/stop_machine.h>
+#include <xen/virtual_region.h>
 #include <asm/alternative.h>
 #include <asm/atomic.h>
 #include <asm/byteorder.h>
@@ -154,8 +155,12 @@ static int __apply_alternatives_multi_stop(void *unused)
         int ret;
         struct alt_region region;
         mfn_t xen_mfn = _mfn(virt_to_mfn(_start));
-        unsigned int xen_order = get_order_from_bytes(_end - _start);
+        unsigned int xen_size = _end - _start;
+        unsigned int xen_order = get_order_from_bytes(xen_size);
         void *xenmap;
+        struct virtual_region patch_region = {
+            .list = LIST_HEAD_INIT(patch_region.list),
+        };
 
         BUG_ON(patched);
 
@@ -169,6 +174,15 @@ static int __apply_alternatives_multi_stop(void *unused)
         BUG_ON(!xenmap);
 
         /*
+         * If we generate a new branch instruction, the target will be
+         * calculated in this re-mapped Xen region. So we have to register
+         * this re-mapped Xen region as a virtual region temporarily.
+         */
+        patch_region.start = xenmap;
+        patch_region.end = xenmap + xen_size;
+        register_virtual_region(&patch_region);
+
+        /*
          * Find the virtual address of the alternative region in the new
          * mapping.
          * alt_instr contains relative offset, so the function
@@ -182,6 +196,8 @@ static int __apply_alternatives_multi_stop(void *unused)
         /* The patching is not expected to fail during boot. */
         BUG_ON(ret != 0);
 
+        unregister_virtual_region(&patch_region);
+
         vunmap(xenmap);
 
         /* Barriers provided by the cache flushing */
-- 
2.7.4


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

^ permalink raw reply related	[flat|nested] 7+ messages in thread
end of thread, other threads:[~2017-04-03  7:46 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-27  8:40 [PATCH v3] xen/arm: alternative: Register re-mapped Xen area as a temporary virtual region Wei Chen
2017-03-27 13:14 ` Konrad Rzeszutek Wilk
2017-03-29 14:23 ` Julien Grall
2017-03-31  6:47   ` Jan Beulich
2017-03-31  8:27     ` Julien Grall
2017-03-31 18:15     ` Stefano Stabellini
2017-04-03  7:46       ` Jan Beulich

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.