[PATCH 1/7] staging: sm750fb: Add braces around if statement.

[PATCH 1/7] staging: sm750fb: Add braces around if statement.

[Varsha Rao]

Added braces around if statement. This patch fixes the following
checkpatch issue:

CHECK: braces {} should be used on all arms of this statement

Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
---
 drivers/staging/sm750fb/ddk750_chip.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/sm750fb/ddk750_chip.c b/drivers/staging/sm750fb/ddk750_chip.c
index 10cf729..7948ca9 100644
--- a/drivers/staging/sm750fb/ddk750_chip.c
+++ b/drivers/staging/sm750fb/ddk750_chip.c
@@ -16,9 +16,9 @@ logical_chip_type_t sm750_get_chip_type(void)
 
 void sm750_set_chip_type(unsigned short devId, u8 revId)
 {
-	if (devId == 0x718)
+	if (devId == 0x718) {
 		chip = SM718;
-	else if (devId == 0x750) {
+	} else if (devId == 0x750) {
 		chip = SM750;
 		/* SM750 and SM750LE are different in their revision ID only. */
 		if (revId == SM750LE_REVISION_ID) {
-- 
2.9.3

[PATCH 2/7] staging: sm750fb: Fix line over 80 characters.

[Varsha Rao]

Line over 80 characters are split to fix the following checkpatch issue:

WARNING: line over 80 characters

Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
---
 drivers/staging/sm750fb/ddk750_chip.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/sm750fb/ddk750_chip.c b/drivers/staging/sm750fb/ddk750_chip.c
index 7948ca9..9e49298 100644
--- a/drivers/staging/sm750fb/ddk750_chip.c
+++ b/drivers/staging/sm750fb/ddk750_chip.c
@@ -69,11 +69,11 @@ static void set_chip_clock(unsigned int frequency)
 		pll.clockType = MXCLK_PLL;
 
 		/*
-		 * Call sm750_calc_pll_value() to fill the other fields of the PLL
-		 * structure. Sometimes, the chip cannot set up the exact
-		 * clock required by the User.
-		 * Return value of sm750_calc_pll_value gives the actual possible
-		 * clock.
+		 * Call sm750_calc_pll_value() to fill the other fields
+		 * of the PLL structure. Sometimes, the chip cannot set
+		 * up the exact clock required by the User.
+		 * Return value of sm750_calc_pll_value gives the actual
+		 * possible clock.
 		 */
 		ulActualMxClk = sm750_calc_pll_value(frequency, &pll);
 
-- 
2.9.3

[PATCH 3/7] staging: sm750fb: Add identifier to function definition argument.

[Varsha Rao]

Added pinit_param as the identifier to function definition argument
struct initchip_param and this patch fixes the checkpatch issue.

Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
---
 drivers/staging/sm750fb/ddk750_chip.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/sm750fb/ddk750_chip.h b/drivers/staging/sm750fb/ddk750_chip.h
index fbeb615..2c7a9b9 100644
--- a/drivers/staging/sm750fb/ddk750_chip.h
+++ b/drivers/staging/sm750fb/ddk750_chip.h
@@ -98,6 +98,6 @@ void sm750_set_chip_type(unsigned short devId, u8 revId);
 unsigned int sm750_calc_pll_value(unsigned int request, struct  pll_value *pll);
 unsigned int sm750_format_pll_reg(struct pll_value *pPLL);
 unsigned int ddk750_get_vm_size(void);
-int ddk750_init_hw(struct initchip_param *);
+int ddk750_init_hw(struct initchip_param *pinit_param);
 
 #endif
-- 
2.9.3

[PATCH 4/7] staging: sm750fb: Remove unnecessary blank lines.

[Varsha Rao]

Removed multiple blank lines, which are not required. This patch fixes
the following check patch issues:

CHECK: Please don't use multiple blank lines

Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
---
 drivers/staging/sm750fb/ddk750_display.h | 5 -----
 drivers/staging/sm750fb/ddk750_dvi.c     | 4 ----
 drivers/staging/sm750fb/ddk750_mode.c    | 5 -----
 drivers/staging/sm750fb/ddk750_mode.h    | 2 --
 drivers/staging/sm750fb/ddk750_power.c   | 5 -----
 drivers/staging/sm750fb/ddk750_power.h   | 1 -
 drivers/staging/sm750fb/ddk750_reg.h     | 4 ----
 7 files changed, 26 deletions(-)

diff --git a/drivers/staging/sm750fb/ddk750_display.h b/drivers/staging/sm750fb/ddk750_display.h
index 8abca88..e2a3f84 100644
--- a/drivers/staging/sm750fb/ddk750_display.h
+++ b/drivers/staging/sm750fb/ddk750_display.h
@@ -12,7 +12,6 @@
 #define PNL_2_PRI	((0 << PNL_2_OFFSET) | PNL_2_USAGE)
 #define PNL_2_SEC	((2 << PNL_2_OFFSET) | PNL_2_USAGE)
 
-
 /*
  * primary timing & plane enable bit
  *	1: 80000[8] & 80000[2] on
@@ -24,7 +23,6 @@
 #define PRI_TP_ON ((0x1 << PRI_TP_OFFSET) | PRI_TP_USAGE)
 #define PRI_TP_OFF ((0x0 << PRI_TP_OFFSET) | PRI_TP_USAGE)
 
-
 /*
  * panel sequency status
  *	80000[27:24]
@@ -66,7 +64,6 @@
 #define CRT_2_PRI ((0x0 << CRT_2_OFFSET) | CRT_2_USAGE)
 #define CRT_2_SEC ((0x2 << CRT_2_OFFSET) | CRT_2_USAGE)
 
-
 /*
  * DAC affect both DVI and DSUB
  *	4[20]
@@ -87,8 +84,6 @@
 #define DPMS_OFF ((3 << DPMS_OFFSET) | DPMS_USAGE)
 #define DPMS_ON ((0 << DPMS_OFFSET) | DPMS_USAGE)
 
-
-
 /*
  * LCD1 means panel path TFT1  & panel path DVI (so enable DAC)
  * CRT means crt path DSUB
diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c
index 250c2f4..42c753f 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -5,7 +5,6 @@
 #include "ddk750_dvi.h"
 #include "ddk750_sii164.h"
 
-
 /*
  * This global variable contains all the supported driver and its corresponding
  * function API. Please set the function pointer to NULL whenever the function
@@ -30,7 +29,6 @@ static dvi_ctrl_device_t g_dcftSupportedDviController[] = {
 #endif
 };
 
-
 int dviInit(
 	unsigned char edgeSelect,
 	unsigned char busSelect,
@@ -56,5 +54,3 @@ int dviInit(
 }
 
 #endif
-
-
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 1df7d57..45af806 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -71,8 +71,6 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam,
 	return dispControl;
 }
 
-
-
 /* only timing related registers will be  programed */
 static int programModeRegisters(mode_parameter_t *pModeParam,
 						struct pll_value *pll)
@@ -112,7 +110,6 @@ static int programModeRegisters(mode_parameter_t *pModeParam,
 			((pModeParam->vertical_sync_start - 1) &
 				CRT_VERTICAL_SYNC_START_MASK));
 
-
 		tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
 		if (pModeParam->vertical_sync_polarity)
 			tmp |= DISPLAY_CTRL_VSYNC_PHASE;
@@ -219,5 +216,3 @@ int ddk750_setModeTiming(mode_parameter_t *parm, clock_type_t clock)
 	programModeRegisters(parm, &pll);
 	return 0;
 }
-
-
diff --git a/drivers/staging/sm750fb/ddk750_mode.h b/drivers/staging/sm750fb/ddk750_mode.h
index e846dc2..2183e66 100644
--- a/drivers/staging/sm750fb/ddk750_mode.h
+++ b/drivers/staging/sm750fb/ddk750_mode.h
@@ -9,7 +9,6 @@ typedef enum _spolarity_t {
 }
 spolarity_t;
 
-
 typedef struct _mode_parameter_t {
 	/* Horizontal timing. */
 	unsigned long horizontal_total;
@@ -37,5 +36,4 @@ mode_parameter_t;
 
 int ddk750_setModeTiming(mode_parameter_t *, clock_type_t);
 
-
 #endif
diff --git a/drivers/staging/sm750fb/ddk750_power.c b/drivers/staging/sm750fb/ddk750_power.c
index 02ff620..222ae1a 100644
--- a/drivers/staging/sm750fb/ddk750_power.c
+++ b/drivers/staging/sm750fb/ddk750_power.c
@@ -24,7 +24,6 @@ static unsigned int get_power_mode(void)
 	return peek32(POWER_MODE_CTRL) & POWER_MODE_CTRL_MODE_MASK;
 }
 
-
 /*
  * SM50x can operate in one of three modes: 0, 1 or Sleep.
  * On hardware reset, power mode 0 is default.
@@ -80,8 +79,6 @@ void sm750_set_current_gate(unsigned int gate)
 		poke32(MODE0_GATE, gate);
 }
 
-
-
 /*
  * This function enable/disable the 2D engine.
  */
@@ -145,5 +142,3 @@ void sm750_enable_i2c(unsigned int enable)
 
 	sm750_set_current_gate(gate);
 }
-
-
diff --git a/drivers/staging/sm750fb/ddk750_power.h b/drivers/staging/sm750fb/ddk750_power.h
index 4274d74..ec0b99d 100644
--- a/drivers/staging/sm750fb/ddk750_power.h
+++ b/drivers/staging/sm750fb/ddk750_power.h
@@ -38,5 +38,4 @@ void sm750_enable_gpio(unsigned int enable);
  */
 void sm750_enable_i2c(unsigned int enable);
 
-
 #endif
diff --git a/drivers/staging/sm750fb/ddk750_reg.h b/drivers/staging/sm750fb/ddk750_reg.h
index 4ed6d8d..f9b989b 100644
--- a/drivers/staging/sm750fb/ddk750_reg.h
+++ b/drivers/staging/sm750fb/ddk750_reg.h
@@ -532,7 +532,6 @@
 #define GPIO_INTERRUPT_STATUS_26                        BIT(17)
 #define GPIO_INTERRUPT_STATUS_25                        BIT(16)
 
-
 #define PANEL_DISPLAY_CTRL                            0x080000
 #define PANEL_DISPLAY_CTRL_RESERVED_MASK              0xc0f08000
 #define PANEL_DISPLAY_CTRL_SELECT_SHIFT               28
@@ -1279,7 +1278,6 @@
 #define I2C_DATA14                                      0x010052
 #define I2C_DATA15                                      0x010053
 
-
 #define ZV0_CAPTURE_CTRL                                0x090000
 #define ZV0_CAPTURE_CTRL_FIELD_INPUT                    BIT(27)
 #define ZV0_CAPTURE_CTRL_SCAN                           BIT(26)
@@ -1445,7 +1443,6 @@
 #define DEFAULT_I2C_SCL                     30
 #define DEFAULT_I2C_SDA                     31
 
-
 #define GPIO_DATA_SM750LE                               0x020018
 #define GPIO_DATA_SM750LE_1                             BIT(1)
 #define GPIO_DATA_SM750LE_0                             BIT(0)
@@ -1454,5 +1451,4 @@
 #define GPIO_DATA_DIRECTION_SM750LE_1                   BIT(1)
 #define GPIO_DATA_DIRECTION_SM750LE_0                   BIT(0)
 
-
 #endif
-- 
2.9.3

[PATCH 5/7] staging: sm750fb: Added spaces around arithmetic operators.

[Varsha Rao]

Added spaces around arithmetic operators (/, *), to fix the checkpatch
issue.

Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
---
 drivers/staging/sm750fb/sm750.h       | 2 +-
 drivers/staging/sm750fb/sm750_accel.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/sm750fb/sm750.h b/drivers/staging/sm750fb/sm750.h
index 28f4b9b..306711e 100644
--- a/drivers/staging/sm750fb/sm750.h
+++ b/drivers/staging/sm750fb/sm750.h
@@ -177,7 +177,7 @@ struct lynxfb_par {
 
 static inline unsigned long ps_to_hz(unsigned int psvalue)
 {
-	unsigned long long numerator = 1000*1000*1000*1000ULL;
+	unsigned long long numerator = 1000 * 1000 * 1000 * 1000ULL;
 	/* 10^12 / picosecond period gives frequency in Hz */
 	do_div(numerator, psvalue);
 	return (unsigned long)numerator;
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index af0db57..57ae743 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -384,7 +384,7 @@ int sm750_hw_imageblit(struct lynx_accel *accel,
 	/* Write MONO data (line by line) to 2D Engine data port */
 	for (i = 0; i < height; i++) {
 		/* For each line, send the data in chunks of 4 bytes */
-		for (j = 0; j < (ul4BytesPerScan/4); j++)
+		for (j = 0; j < (ul4BytesPerScan / 4); j++)
 			write_dpPort(accel, *(unsigned int *)(pSrcbuf + (j * 4)));
 
 		if (ulBytesRemain) {
-- 
2.9.3

[PATCH 6/7] staging: sm750fb: Replace NULL comparison.

[Varsha Rao]

Replaced NULL comparison with pCurrentDviCtrl->pfnInit. This patch fixes
the following checkpatch issue:

CHECK: Comparison to NULL could be written "pCurrentDviCtrl->pfnInit"

Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
---
 drivers/staging/sm750fb/ddk750_dvi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c
index 42c753f..171ae06 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -45,7 +45,7 @@ int dviInit(
 	dvi_ctrl_device_t *pCurrentDviCtrl;
 
 	pCurrentDviCtrl = g_dcftSupportedDviController;
-	if (pCurrentDviCtrl->pfnInit != NULL) {
+	if (pCurrentDviCtrl->pfnInit) {
 		return pCurrentDviCtrl->pfnInit(edgeSelect, busSelect, dualEdgeClkSelect, hsyncEnable,
 						vsyncEnable, deskewEnable, deskewSetting, continuousSyncEnable,
 						pllFilterEnable, pllFilterValue);
-- 
2.9.3

[PATCH v3 7/7] staging: sm750fb: Remove blank lines after { and before } braces.

[Varsha Rao]

Removed unnecessary blank lines after open brace and before closed
braces, to fix the check patch issue.

Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
---
Changes in v3:
- Removed braces which are not required in sm750_accel.c

 drivers/staging/sm750fb/sm750.c        | 1 -
 drivers/staging/sm750fb/sm750_accel.c  | 4 ----
 drivers/staging/sm750fb/sm750_cursor.c | 4 ----
 3 files changed, 9 deletions(-)

diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index 332a3ef..c618c56 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -806,7 +806,6 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
 	}
 
 	for (i = 0; i < 3; i++) {
-
 		ret = fb_find_mode(var, info, g_fbmode[index],
 				   pdb[i], cdb[i], NULL, 8);
 
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 57ae743..9548863 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -259,8 +259,6 @@ unsigned int rop2)   /* ROP value */
 	if (accel->de_wait() != 0)
 		return -1;
 
-	{
-
 	write_dpr(accel, DE_SOURCE,
 		  ((sx << DE_SOURCE_X_K1_SHIFT) & DE_SOURCE_X_K1_MASK) |
 		  (sy & DE_SOURCE_Y_K2_MASK)); /* dpr0 */
@@ -276,8 +274,6 @@ unsigned int rop2)   /* ROP value */
 		DE_CONTROL_COMMAND_BITBLT | DE_CONTROL_STATUS;
 	write_dpr(accel, DE_CONTROL, de_ctrl); /* dpr0c */
 
-	}
-
 	return 0;
 }
 
diff --git a/drivers/staging/sm750fb/sm750_cursor.c b/drivers/staging/sm750fb/sm750_cursor.c
index dbc8bb1..aa232c3 100644
--- a/drivers/staging/sm750fb/sm750_cursor.c
+++ b/drivers/staging/sm750fb/sm750_cursor.c
@@ -131,10 +131,7 @@ void sm750_hw_cursor_setData(struct lynx_cursor *cursor,
 		} else {
 			pbuffer += sizeof(u16);
 		}
-
 	}
-
-
 }
 
 
@@ -178,6 +175,5 @@ void sm750_hw_cursor_setData2(struct lynx_cursor *cursor,
 		} else {
 			pbuffer += sizeof(u16);
 		}
-
 	}
 }
-- 
2.9.3