[GIT PULL] Renesas ARM Based SoC Cleanup Updates for v3.16

[GIT PULL] Renesas ARM Based SoC Cleanup Updates for v3.16

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC cleanup updates for v3.16.


The following changes since commit c9eaa447e77efe77b7fa4c953bd62de8297fd6c5:

  Linux 3.15-rc1 (2014-04-13 14:18:35 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v3.16

for you to fetch changes up to bb6c3d58c36adb205b4bf233fd1c4079e02a6811:

  ARM: shmobile: r8a7740: Make r8a7740_meram_workaround() __init (2014-04-16 10:01:49 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC Cleanup Updates for v3.16

r8a7740 (R-Mobile A1) SoC
* Make r8a7740_meram_workaround() __init
* Remove unused r8a7740_add_early_devices_dt()

r8a7740 (R-Mobile A1) based Armadillo800 EVA board
* Spelling and grammar fixes

sh7372 (SH-Mobile AP4) SoC
* Call sh7372_add_early_devices() instead of open coding

----------------------------------------------------------------
Geert Uytterhoeven (4):
      ARM: shmobile: armadillo800eva: Spelling and grammar
      ARM: shmobile: r8a7740: Remove unused r8a7740_add_early_devices_dt()
      ARM: shmobile: sh7372: Call sh7372_add_early_devices() instead of open coding
      ARM: shmobile: r8a7740: Make r8a7740_meram_workaround() __init

 arch/arm/mach-shmobile/Kconfig         |  4 ++--
 arch/arm/mach-shmobile/setup-r8a7740.c | 13 +------------
 arch/arm/mach-shmobile/setup-sh7372.c  |  6 +-----
 3 files changed, 4 insertions(+), 19 deletions(-)

[GIT PULL] Renesas ARM Based SoC Cleanup Updates for v3.16

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC cleanup updates for v3.16.


The following changes since commit c9eaa447e77efe77b7fa4c953bd62de8297fd6c5:

  Linux 3.15-rc1 (2014-04-13 14:18:35 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v3.16

for you to fetch changes up to bb6c3d58c36adb205b4bf233fd1c4079e02a6811:

  ARM: shmobile: r8a7740: Make r8a7740_meram_workaround() __init (2014-04-16 10:01:49 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC Cleanup Updates for v3.16

r8a7740 (R-Mobile A1) SoC
* Make r8a7740_meram_workaround() __init
* Remove unused r8a7740_add_early_devices_dt()

r8a7740 (R-Mobile A1) based Armadillo800 EVA board
* Spelling and grammar fixes

sh7372 (SH-Mobile AP4) SoC
* Call sh7372_add_early_devices() instead of open coding

----------------------------------------------------------------
Geert Uytterhoeven (4):
      ARM: shmobile: armadillo800eva: Spelling and grammar
      ARM: shmobile: r8a7740: Remove unused r8a7740_add_early_devices_dt()
      ARM: shmobile: sh7372: Call sh7372_add_early_devices() instead of open coding
      ARM: shmobile: r8a7740: Make r8a7740_meram_workaround() __init

 arch/arm/mach-shmobile/Kconfig         |  4 ++--
 arch/arm/mach-shmobile/setup-r8a7740.c | 13 +------------
 arch/arm/mach-shmobile/setup-sh7372.c  |  6 +-----
 3 files changed, 4 insertions(+), 19 deletions(-)

[PATCH 1/4] ARM: shmobile: armadillo800eva: Spelling and grammar

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 0f92ba8..edb1a91 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -205,8 +205,8 @@ config MACH_ARMADILLO800EVA_REFERENCE
 	select SND_SOC_WM8978 if SND_SIMPLE_CARD
 	select USE_OF
 	---help---
-	   Use reference implementation of Aramdillo800 EVA board support
-	   which makes a greater use of device tree at the expense
+	   Use reference implementation of Armadillo800 EVA board support
+	   which makes greater use of device tree at the expense
 	   of not supporting a number of devices.
 
 	   This is intended to aid developers
-- 
1.8.5.2

[PATCH 1/4] ARM: shmobile: armadillo800eva: Spelling and grammar

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 0f92ba8..edb1a91 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -205,8 +205,8 @@ config MACH_ARMADILLO800EVA_REFERENCE
 	select SND_SOC_WM8978 if SND_SIMPLE_CARD
 	select USE_OF
 	---help---
-	   Use reference implementation of Aramdillo800 EVA board support
-	   which makes a greater use of device tree at the expense
+	   Use reference implementation of Armadillo800 EVA board support
+	   which makes greater use of device tree at the expense
 	   of not supporting a number of devices.
 
 	   This is intended to aid developers
-- 
1.8.5.2

[PATCH 2/4] ARM: shmobile: r8a7740: Remove unused r8a7740_add_early_devices_dt()

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

It was removed in commit 744fdc8dc0e22cc5b61ee1bcde9375f188daa330 ("ARM:
shmobile: r8a7740: Prepare for reference DT setup"), but accidentally
resurrected in commit 88378837780166d67a11142cd6f76596c0a2d8c3 ("ARM:
shmobile: Remove unused r8a7740 auxdata table").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7740.c | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 8f3c681..cba3a07 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -869,17 +869,6 @@ void __init r8a7740_add_early_devices(void)
 
 #ifdef CONFIG_USE_OF
 
-void __init r8a7740_add_early_devices_dt(void)
-{
-	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
-
-	early_platform_add_devices(r8a7740_early_devices,
-				   ARRAY_SIZE(r8a7740_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
-}
-
 void __init r8a7740_add_standard_devices_dt(void)
 {
 	platform_add_devices(r8a7740_devices_dt,
-- 
1.8.5.2

[PATCH 2/4] ARM: shmobile: r8a7740: Remove unused r8a7740_add_early_devices_dt()

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

It was removed in commit 744fdc8dc0e22cc5b61ee1bcde9375f188daa330 ("ARM:
shmobile: r8a7740: Prepare for reference DT setup"), but accidentally
resurrected in commit 88378837780166d67a11142cd6f76596c0a2d8c3 ("ARM:
shmobile: Remove unused r8a7740 auxdata table").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7740.c | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 8f3c681..cba3a07 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -869,17 +869,6 @@ void __init r8a7740_add_early_devices(void)
 
 #ifdef CONFIG_USE_OF
 
-void __init r8a7740_add_early_devices_dt(void)
-{
-	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
-
-	early_platform_add_devices(r8a7740_early_devices,
-				   ARRAY_SIZE(r8a7740_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
-}
-
 void __init r8a7740_add_standard_devices_dt(void)
 {
 	platform_add_devices(r8a7740_devices_dt,
-- 
1.8.5.2

[PATCH 3/4] ARM: shmobile: sh7372: Call sh7372_add_early_devices() instead of open coding

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-sh7372.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 2730127..f8176b0 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -1037,11 +1037,7 @@ void __init sh7372_add_early_devices_dt(void)
 {
 	shmobile_setup_delay(800, 1, 3); /* Cortex-A8 @ 800MHz */
 
-	early_platform_add_devices(sh7372_early_devices,
-				   ARRAY_SIZE(sh7372_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
+	sh7372_add_early_devices();
 }
 
 void __init sh7372_add_standard_devices_dt(void)
-- 
1.8.5.2

[PATCH 3/4] ARM: shmobile: sh7372: Call sh7372_add_early_devices() instead of open coding

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-sh7372.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 2730127..f8176b0 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -1037,11 +1037,7 @@ void __init sh7372_add_early_devices_dt(void)
 {
 	shmobile_setup_delay(800, 1, 3); /* Cortex-A8 @ 800MHz */
 
-	early_platform_add_devices(sh7372_early_devices,
-				   ARRAY_SIZE(sh7372_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
+	sh7372_add_early_devices();
 }
 
 void __init sh7372_add_standard_devices_dt(void)
-- 
1.8.5.2

[PATCH 4/4] ARM: shmobile: r8a7740: Make r8a7740_meram_workaround() __init

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

It's called from eva_init() only, which is __init

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7740.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index cba3a07..a177a7b 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -765,7 +765,7 @@ static struct platform_device *r8a7740_late_devices[] __initdata = {
  *	"Media RAM (MERAM)" on r8a7740 documentation
  */
 #define MEBUFCNTR	0xFE950098
-void r8a7740_meram_workaround(void)
+void __init r8a7740_meram_workaround(void)
 {
 	void __iomem *reg;
 
-- 
1.8.5.2

[PATCH 4/4] ARM: shmobile: r8a7740: Make r8a7740_meram_workaround() __init

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

It's called from eva_init() only, which is __init

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7740.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index cba3a07..a177a7b 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -765,7 +765,7 @@ static struct platform_device *r8a7740_late_devices[] __initdata = {
  *	"Media RAM (MERAM)" on r8a7740 documentation
  */
 #define MEBUFCNTR	0xFE950098
-void r8a7740_meram_workaround(void)
+void __init r8a7740_meram_workaround(void)
 {
 	void __iomem *reg;
 
-- 
1.8.5.2

Re: [GIT PULL] Renesas ARM Based SoC Cleanup Updates for v3.16

[Olof Johansson]

On Wed, Apr 23, 2014 at 10:25:38AM +0900, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these Renesas ARM based SoC cleanup updates for v3.16.
> 
> 
> The following changes since commit c9eaa447e77efe77b7fa4c953bd62de8297fd6c5:
> 
>   Linux 3.15-rc1 (2014-04-13 14:18:35 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v3.16
> 
> for you to fetch changes up to bb6c3d58c36adb205b4bf233fd1c4079e02a6811:
> 
>   ARM: shmobile: r8a7740: Make r8a7740_meram_workaround() __init (2014-04-16 10:01:49 +0900)

Merged, thanks.


-Olof

[GIT PULL] Renesas ARM Based SoC Cleanup Updates for v3.16

[Olof Johansson]

On Wed, Apr 23, 2014 at 10:25:38AM +0900, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these Renesas ARM based SoC cleanup updates for v3.16.
> 
> 
> The following changes since commit c9eaa447e77efe77b7fa4c953bd62de8297fd6c5:
> 
>   Linux 3.15-rc1 (2014-04-13 14:18:35 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v3.16
> 
> for you to fetch changes up to bb6c3d58c36adb205b4bf233fd1c4079e02a6811:
> 
>   ARM: shmobile: r8a7740: Make r8a7740_meram_workaround() __init (2014-04-16 10:01:49 +0900)

Merged, thanks.


-Olof

[GIT PULL] Renesas ARM Based SoC Cleanups v3.16

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC cleanups v3.16.

This pull request is based on Renesas ARM Based SoC Updates for v3.16,
tagged as renesas-soc-for-v3.16, which you have already pulled.


This series includes dependencies that do not fit easily into the usual
inter-branch dependencies and as such I have grouped them together in a
single branch.


The following changes since commit e35db38d66d1e4007cfc1bb90a05e11b4aaee2a8:

  ARM: shmobile: r8a7778/bockw: Move "select RENESAS_INTC_IRQPIN" under SoC (2014-04-14 11:28:43 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc-cleanup-for-v3.16

for you to fetch changes up to f492b81777c93b33afe892b424e022022b5bc297:

  ARM: shmobile: Set clock frequency in HZ from OF nodes (2014-05-14 14:02:21 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC soc-cleanup Updates for v3.16

r8a7791 (R-Car H2) SoC and its Koelsch board and,
r8a7740 (R-Mobile A1) SoC and its Armadillo800eva board
* Set CPU clock frequency from OF nodes

----------------------------------------------------------------
Magnus Damm (8):
      ARM: shmobile: Add r8a7740 Maximum CPU Frequency to DTS
      ARM: shmobile: Use r8a7740 DT CPU Frequency in common case
      ARM: shmobile: Use r8a7740 DT CPU Frequency for Armadillo DT Ref
      ARM: shmobile: Remove unused r8a7740_init_delay()
      ARM: shmobile: Use r8a7791 DT CPU Frequency in common case
      ARM: shmobile: Use r8a7791 DT CPU Frequency for Koelsch
      ARM: shmobile: Remove unused r8a7791_init_early()
      ARM: shmobile: Use shmobile_init_late() on r8a7740

Simon Horman (1):
      ARM: shmobile: Set clock frequency in HZ from OF nodes

 arch/arm/boot/dts/r8a7740.dtsi                     |  1 +
 .../board-armadillo800eva-reference.c              |  2 +-
 arch/arm/mach-shmobile/board-koelsch-reference.c   |  2 +-
 arch/arm/mach-shmobile/board-koelsch.c             |  2 +-
 arch/arm/mach-shmobile/include/mach/r8a7740.h      |  1 -
 arch/arm/mach-shmobile/include/mach/r8a7791.h      |  1 -
 arch/arm/mach-shmobile/setup-r8a7740.c             |  8 ++------
 arch/arm/mach-shmobile/setup-r8a7791.c             |  9 +--------
 arch/arm/mach-shmobile/timer.c                     | 23 +++++++++++++++++++---
 9 files changed, 27 insertions(+), 22 deletions(-)

[GIT PULL] Renesas ARM Based SoC Cleanups v3.16

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC cleanups v3.16.

This pull request is based on Renesas ARM Based SoC Updates for v3.16,
tagged as renesas-soc-for-v3.16, which you have already pulled.


This series includes dependencies that do not fit easily into the usual
inter-branch dependencies and as such I have grouped them together in a
single branch.


The following changes since commit e35db38d66d1e4007cfc1bb90a05e11b4aaee2a8:

  ARM: shmobile: r8a7778/bockw: Move "select RENESAS_INTC_IRQPIN" under SoC (2014-04-14 11:28:43 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc-cleanup-for-v3.16

for you to fetch changes up to f492b81777c93b33afe892b424e022022b5bc297:

  ARM: shmobile: Set clock frequency in HZ from OF nodes (2014-05-14 14:02:21 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC soc-cleanup Updates for v3.16

r8a7791 (R-Car H2) SoC and its Koelsch board and,
r8a7740 (R-Mobile A1) SoC and its Armadillo800eva board
* Set CPU clock frequency from OF nodes

----------------------------------------------------------------
Magnus Damm (8):
      ARM: shmobile: Add r8a7740 Maximum CPU Frequency to DTS
      ARM: shmobile: Use r8a7740 DT CPU Frequency in common case
      ARM: shmobile: Use r8a7740 DT CPU Frequency for Armadillo DT Ref
      ARM: shmobile: Remove unused r8a7740_init_delay()
      ARM: shmobile: Use r8a7791 DT CPU Frequency in common case
      ARM: shmobile: Use r8a7791 DT CPU Frequency for Koelsch
      ARM: shmobile: Remove unused r8a7791_init_early()
      ARM: shmobile: Use shmobile_init_late() on r8a7740

Simon Horman (1):
      ARM: shmobile: Set clock frequency in HZ from OF nodes

 arch/arm/boot/dts/r8a7740.dtsi                     |  1 +
 .../board-armadillo800eva-reference.c              |  2 +-
 arch/arm/mach-shmobile/board-koelsch-reference.c   |  2 +-
 arch/arm/mach-shmobile/board-koelsch.c             |  2 +-
 arch/arm/mach-shmobile/include/mach/r8a7740.h      |  1 -
 arch/arm/mach-shmobile/include/mach/r8a7791.h      |  1 -
 arch/arm/mach-shmobile/setup-r8a7740.c             |  8 ++------
 arch/arm/mach-shmobile/setup-r8a7791.c             |  9 +--------
 arch/arm/mach-shmobile/timer.c                     | 23 +++++++++++++++++++---
 9 files changed, 27 insertions(+), 22 deletions(-)

[PATCH 1/9] ARM: shmobile: Add r8a7740 Maximum CPU Frequency to DTS

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Add 800 MHz to the r8a7740 DTS to describe the maximum CPU frequency.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Tested-by: Geert Uytterhoeven <geert@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7740.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 8280884..67c4b8b 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -22,6 +22,7 @@
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <0x0>;
+			clock-frequency = <800000000>;
 		};
 	};
 
-- 
1.8.5.2

[PATCH 1/9] ARM: shmobile: Add r8a7740 Maximum CPU Frequency to DTS

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Add 800 MHz to the r8a7740 DTS to describe the maximum CPU frequency.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Tested-by: Geert Uytterhoeven <geert@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7740.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 8280884..67c4b8b 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -22,6 +22,7 @@
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <0x0>;
+			clock-frequency = <800000000>;
 		};
 	};
 
-- 
1.8.5.2

[PATCH 2/9] ARM: shmobile: Use r8a7740 DT CPU Frequency in common case

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Convert the common C-code-less r8a7740 DT board support
to use shmobile_init_delay() to be able to migrate away
from per-SoC delay setup functions.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Tested-by: Geert Uytterhoeven <geert@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7740.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 8f3c681..d1ce3ca 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -935,7 +935,7 @@ static const char *r8a7740_boards_compat_dt[] __initdata = {
 
 DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
 	.map_io		= r8a7740_map_io,
-	.init_early	= r8a7740_init_delay,
+	.init_early	= shmobile_init_delay,
 	.init_irq	= r8a7740_init_irq_of,
 	.init_machine	= r8a7740_generic_init,
 	.dt_compat	= r8a7740_boards_compat_dt,
-- 
1.8.5.2

[PATCH 2/9] ARM: shmobile: Use r8a7740 DT CPU Frequency in common case

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Convert the common C-code-less r8a7740 DT board support
to use shmobile_init_delay() to be able to migrate away
from per-SoC delay setup functions.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Tested-by: Geert Uytterhoeven <geert@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7740.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 8f3c681..d1ce3ca 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -935,7 +935,7 @@ static const char *r8a7740_boards_compat_dt[] __initdata = {
 
 DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
 	.map_io		= r8a7740_map_io,
-	.init_early	= r8a7740_init_delay,
+	.init_early	= shmobile_init_delay,
 	.init_irq	= r8a7740_init_irq_of,
 	.init_machine	= r8a7740_generic_init,
 	.dt_compat	= r8a7740_boards_compat_dt,
-- 
1.8.5.2

[PATCH 3/9] ARM: shmobile: Use r8a7740 DT CPU Frequency for Armadillo DT Ref

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Convert the Armadillo r8a7740 DT reference board support
to use shmobile_init_delay() to be able to migrate away
from per-SoC delay setup functions.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Tested-by: Geert Uytterhoeven <geert@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-armadillo800eva-reference.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
index 57d1a78..57d246e 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
@@ -187,7 +187,7 @@ static const char *eva_boards_compat_dt[] __initdata = {
 
 DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference")
 	.map_io		= r8a7740_map_io,
-	.init_early	= r8a7740_init_delay,
+	.init_early	= shmobile_init_delay,
 	.init_irq	= r8a7740_init_irq_of,
 	.init_machine	= eva_init,
 	.init_late	= shmobile_init_late,
-- 
1.8.5.2

[PATCH 3/9] ARM: shmobile: Use r8a7740 DT CPU Frequency for Armadillo DT Ref

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Convert the Armadillo r8a7740 DT reference board support
to use shmobile_init_delay() to be able to migrate away
from per-SoC delay setup functions.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Tested-by: Geert Uytterhoeven <geert@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-armadillo800eva-reference.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
index 57d1a78..57d246e 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
@@ -187,7 +187,7 @@ static const char *eva_boards_compat_dt[] __initdata = {
 
 DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference")
 	.map_io		= r8a7740_map_io,
-	.init_early	= r8a7740_init_delay,
+	.init_early	= shmobile_init_delay,
 	.init_irq	= r8a7740_init_irq_of,
 	.init_machine	= eva_init,
 	.init_late	= shmobile_init_late,
-- 
1.8.5.2

[PATCH 4/9] ARM: shmobile: Remove unused r8a7740_init_delay()

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Remove the now unused r8a7740_init_delay() function.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Tested-by: Geert Uytterhoeven <geert@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/r8a7740.h | 1 -
 arch/arm/mach-shmobile/setup-r8a7740.c        | 5 -----
 2 files changed, 6 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h
index d07932f..5e3c9ec 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7740.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h
@@ -47,7 +47,6 @@ enum {
 };
 
 extern void r8a7740_meram_workaround(void);
-extern void r8a7740_init_delay(void);
 extern void r8a7740_init_irq_of(void);
 extern void r8a7740_map_io(void);
 extern void r8a7740_add_early_devices(void);
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index d1ce3ca..eaec043 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -887,11 +887,6 @@ void __init r8a7740_add_standard_devices_dt(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-void __init r8a7740_init_delay(void)
-{
-	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
-};
-
 void __init r8a7740_init_irq_of(void)
 {
 	void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
-- 
1.8.5.2

[PATCH 4/9] ARM: shmobile: Remove unused r8a7740_init_delay()

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Remove the now unused r8a7740_init_delay() function.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Tested-by: Geert Uytterhoeven <geert@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/r8a7740.h | 1 -
 arch/arm/mach-shmobile/setup-r8a7740.c        | 5 -----
 2 files changed, 6 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h
index d07932f..5e3c9ec 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7740.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h
@@ -47,7 +47,6 @@ enum {
 };
 
 extern void r8a7740_meram_workaround(void);
-extern void r8a7740_init_delay(void);
 extern void r8a7740_init_irq_of(void);
 extern void r8a7740_map_io(void);
 extern void r8a7740_add_early_devices(void);
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index d1ce3ca..eaec043 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -887,11 +887,6 @@ void __init r8a7740_add_standard_devices_dt(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-void __init r8a7740_init_delay(void)
-{
-	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
-};
-
 void __init r8a7740_init_irq_of(void)
 {
 	void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
-- 
1.8.5.2

[PATCH 5/9] ARM: shmobile: Use r8a7791 DT CPU Frequency in common case

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Convert the common C-code-less r8a7791 DT board support
to use shmobile_init_delay() to be able to migrate away
from per-SoC delay setup functions.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7791.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index a7e4966..2c84e74 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -225,7 +225,7 @@ static const char *r8a7791_boards_compat_dt[] __initdata = {
 
 DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
 	.smp		= smp_ops(r8a7791_smp_ops),
-	.init_early	= r8a7791_init_early,
+	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
 	.dt_compat	= r8a7791_boards_compat_dt,
 MACHINE_END
-- 
1.8.5.2

[PATCH 5/9] ARM: shmobile: Use r8a7791 DT CPU Frequency in common case

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Convert the common C-code-less r8a7791 DT board support
to use shmobile_init_delay() to be able to migrate away
from per-SoC delay setup functions.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7791.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index a7e4966..2c84e74 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -225,7 +225,7 @@ static const char *r8a7791_boards_compat_dt[] __initdata = {
 
 DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
 	.smp		= smp_ops(r8a7791_smp_ops),
-	.init_early	= r8a7791_init_early,
+	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
 	.dt_compat	= r8a7791_boards_compat_dt,
 MACHINE_END
-- 
1.8.5.2

[PATCH 6/9] ARM: shmobile: Use r8a7791 DT CPU Frequency for Koelsch

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Convert the Koelsch board support to use shmobile_init_delay()
to be able to migrate away from per-SoC delay setup functions.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-koelsch-reference.c | 2 +-
 arch/arm/mach-shmobile/board-koelsch.c           | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c
index a3fd302..ff33d9c 100644
--- a/arch/arm/mach-shmobile/board-koelsch-reference.c
+++ b/arch/arm/mach-shmobile/board-koelsch-reference.c
@@ -139,7 +139,7 @@ static const char * const koelsch_boards_compat_dt[] __initconst = {
 
 DT_MACHINE_START(KOELSCH_DT, "koelsch")
 	.smp		= smp_ops(r8a7791_smp_ops),
-	.init_early	= r8a7791_init_early,
+	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
 	.init_machine	= koelsch_add_standard_devices,
 	.init_late	= shmobile_init_late,
diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c
index 5a034ff..3cd8008 100644
--- a/arch/arm/mach-shmobile/board-koelsch.c
+++ b/arch/arm/mach-shmobile/board-koelsch.c
@@ -522,7 +522,7 @@ static const char * const koelsch_boards_compat_dt[] __initconst = {
 
 DT_MACHINE_START(KOELSCH_DT, "koelsch")
 	.smp		= smp_ops(r8a7791_smp_ops),
-	.init_early	= r8a7791_init_early,
+	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
 	.init_machine	= koelsch_init,
 	.init_late	= shmobile_init_late,
-- 
1.8.5.2

[PATCH 6/9] ARM: shmobile: Use r8a7791 DT CPU Frequency for Koelsch

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Convert the Koelsch board support to use shmobile_init_delay()
to be able to migrate away from per-SoC delay setup functions.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-koelsch-reference.c | 2 +-
 arch/arm/mach-shmobile/board-koelsch.c           | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c
index a3fd302..ff33d9c 100644
--- a/arch/arm/mach-shmobile/board-koelsch-reference.c
+++ b/arch/arm/mach-shmobile/board-koelsch-reference.c
@@ -139,7 +139,7 @@ static const char * const koelsch_boards_compat_dt[] __initconst = {
 
 DT_MACHINE_START(KOELSCH_DT, "koelsch")
 	.smp		= smp_ops(r8a7791_smp_ops),
-	.init_early	= r8a7791_init_early,
+	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
 	.init_machine	= koelsch_add_standard_devices,
 	.init_late	= shmobile_init_late,
diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c
index 5a034ff..3cd8008 100644
--- a/arch/arm/mach-shmobile/board-koelsch.c
+++ b/arch/arm/mach-shmobile/board-koelsch.c
@@ -522,7 +522,7 @@ static const char * const koelsch_boards_compat_dt[] __initconst = {
 
 DT_MACHINE_START(KOELSCH_DT, "koelsch")
 	.smp		= smp_ops(r8a7791_smp_ops),
-	.init_early	= r8a7791_init_early,
+	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
 	.init_machine	= koelsch_init,
 	.init_late	= shmobile_init_late,
-- 
1.8.5.2

[PATCH 7/9] ARM: shmobile: Remove unused r8a7791_init_early()

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Remove the now unused r8a7791_init_early() function.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/r8a7791.h | 1 -
 arch/arm/mach-shmobile/setup-r8a7791.c        | 7 -------
 2 files changed, 8 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h
index 200fa69..664274c 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7791.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h
@@ -5,7 +5,6 @@ void r8a7791_add_standard_devices(void);
 void r8a7791_add_dt_devices(void);
 void r8a7791_clock_init(void);
 void r8a7791_pinmux_init(void);
-void r8a7791_init_early(void);
 extern struct smp_operations r8a7791_smp_ops;
 
 #endif /* __ASM_R8A7791_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index 2c84e74..949580a 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -210,13 +210,6 @@ void __init r8a7791_add_standard_devices(void)
 	r8a7791_register_thermal();
 }
 
-void __init r8a7791_init_early(void)
-{
-#ifndef CONFIG_ARM_ARCH_TIMER
-	shmobile_setup_delay(1500, 2, 4); /* Cortex-A15 @ 1500MHz */
-#endif
-}
-
 #ifdef CONFIG_USE_OF
 static const char *r8a7791_boards_compat_dt[] __initdata = {
 	"renesas,r8a7791",
-- 
1.8.5.2

[PATCH 7/9] ARM: shmobile: Remove unused r8a7791_init_early()

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Remove the now unused r8a7791_init_early() function.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/r8a7791.h | 1 -
 arch/arm/mach-shmobile/setup-r8a7791.c        | 7 -------
 2 files changed, 8 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h
index 200fa69..664274c 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7791.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h
@@ -5,7 +5,6 @@ void r8a7791_add_standard_devices(void);
 void r8a7791_add_dt_devices(void);
 void r8a7791_clock_init(void);
 void r8a7791_pinmux_init(void);
-void r8a7791_init_early(void);
 extern struct smp_operations r8a7791_smp_ops;
 
 #endif /* __ASM_R8A7791_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index 2c84e74..949580a 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -210,13 +210,6 @@ void __init r8a7791_add_standard_devices(void)
 	r8a7791_register_thermal();
 }
 
-void __init r8a7791_init_early(void)
-{
-#ifndef CONFIG_ARM_ARCH_TIMER
-	shmobile_setup_delay(1500, 2, 4); /* Cortex-A15 @ 1500MHz */
-#endif
-}
-
 #ifdef CONFIG_USE_OF
 static const char *r8a7791_boards_compat_dt[] __initdata = {
 	"renesas,r8a7791",
-- 
1.8.5.2

[PATCH 8/9] ARM: shmobile: Use shmobile_init_late() on r8a7740

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Hook up ->init_late for r8a7740 to initialize Suspend-to-RAM
and CPUIdle in case of C-code less board support for r8a7740.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7740.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index eaec043..7bdc51c 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -933,6 +933,7 @@ DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
 	.init_early	= shmobile_init_delay,
 	.init_irq	= r8a7740_init_irq_of,
 	.init_machine	= r8a7740_generic_init,
+	.init_late	= shmobile_init_late,
 	.dt_compat	= r8a7740_boards_compat_dt,
 MACHINE_END
 
-- 
1.8.5.2

[PATCH 8/9] ARM: shmobile: Use shmobile_init_late() on r8a7740

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Hook up ->init_late for r8a7740 to initialize Suspend-to-RAM
and CPUIdle in case of C-code less board support for r8a7740.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7740.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index eaec043..7bdc51c 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -933,6 +933,7 @@ DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
 	.init_early	= shmobile_init_delay,
 	.init_irq	= r8a7740_init_irq_of,
 	.init_machine	= r8a7740_generic_init,
+	.init_late	= shmobile_init_late,
 	.dt_compat	= r8a7740_boards_compat_dt,
 MACHINE_END
 
-- 
1.8.5.2

[PATCH 9/9] ARM: shmobile: Set clock frequency in HZ from OF nodes

[Simon Horman]

shmobile_init_delay() looks for OF "clock-frequency" to determine
the delay which is set by calling shmobile_setup_delay().

Unfortunately this seems to be incorrect in detail as
"clock-frequency" node values are in HZ whereas the frequency
argument to shmobile_setup_delay() is in MHz.

Provide a variant of shmobile_setup_delay() that accepts HZ to
correct this problem.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/timer.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index ccecde9..68bc0b8 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -23,6 +23,23 @@
 #include <linux/delay.h>
 #include <linux/of_address.h>
 
+void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz,
+				    unsigned int mult, unsigned int div)
+{
+	/* calculate a worst-case loops-per-jiffy value
+	 * based on maximum cpu core hz setting and the
+	 * __delay() implementation in arch/arm/lib/delay.S
+	 *
+	 * this will result in a longer delay than expected
+	 * when the cpu core runs on lower frequencies.
+	 */
+
+	unsigned int value = HZ * div / mult;
+
+	if (!preset_lpj)
+		preset_lpj = max_cpu_core_hz / value;
+}
+
 void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz,
 				 unsigned int mult, unsigned int div)
 {
@@ -58,12 +75,12 @@ void __init shmobile_init_delay(void)
 
 	if (max_freq) {
 		if (of_find_compatible_node(NULL, NULL, "arm,cortex-a8"))
-			shmobile_setup_delay(max_freq, 1, 3);
+			shmobile_setup_delay_hz(max_freq, 1, 3);
 		else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
-			shmobile_setup_delay(max_freq, 1, 3);
+			shmobile_setup_delay_hz(max_freq, 1, 3);
 		else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a15"))
 			if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
-				shmobile_setup_delay(max_freq, 2, 4);
+				shmobile_setup_delay_hz(max_freq, 2, 4);
 	}
 }
 
-- 
1.8.5.2

[PATCH 9/9] ARM: shmobile: Set clock frequency in HZ from OF nodes

[Simon Horman]

shmobile_init_delay() looks for OF "clock-frequency" to determine
the delay which is set by calling shmobile_setup_delay().

Unfortunately this seems to be incorrect in detail as
"clock-frequency" node values are in HZ whereas the frequency
argument to shmobile_setup_delay() is in MHz.

Provide a variant of shmobile_setup_delay() that accepts HZ to
correct this problem.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/timer.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index ccecde9..68bc0b8 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -23,6 +23,23 @@
 #include <linux/delay.h>
 #include <linux/of_address.h>
 
+void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz,
+				    unsigned int mult, unsigned int div)
+{
+	/* calculate a worst-case loops-per-jiffy value
+	 * based on maximum cpu core hz setting and the
+	 * __delay() implementation in arch/arm/lib/delay.S
+	 *
+	 * this will result in a longer delay than expected
+	 * when the cpu core runs on lower frequencies.
+	 */
+
+	unsigned int value = HZ * div / mult;
+
+	if (!preset_lpj)
+		preset_lpj = max_cpu_core_hz / value;
+}
+
 void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz,
 				 unsigned int mult, unsigned int div)
 {
@@ -58,12 +75,12 @@ void __init shmobile_init_delay(void)
 
 	if (max_freq) {
 		if (of_find_compatible_node(NULL, NULL, "arm,cortex-a8"))
-			shmobile_setup_delay(max_freq, 1, 3);
+			shmobile_setup_delay_hz(max_freq, 1, 3);
 		else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
-			shmobile_setup_delay(max_freq, 1, 3);
+			shmobile_setup_delay_hz(max_freq, 1, 3);
 		else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a15"))
 			if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
-				shmobile_setup_delay(max_freq, 2, 4);
+				shmobile_setup_delay_hz(max_freq, 2, 4);
 	}
 }
 
-- 
1.8.5.2

Re: [GIT PULL] Renesas ARM Based SoC Cleanups v3.16

[Olof Johansson]

On Fri, May 16, 2014 at 09:58:46AM +0900, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these Renesas ARM based SoC cleanups v3.16.
> 
> This pull request is based on Renesas ARM Based SoC Updates for v3.16,
> tagged as renesas-soc-for-v3.16, which you have already pulled.
> 
> 
> This series includes dependencies that do not fit easily into the usual
> inter-branch dependencies and as such I have grouped them together in a
> single branch.
> 
> 
> The following changes since commit e35db38d66d1e4007cfc1bb90a05e11b4aaee2a8:
> 
>   ARM: shmobile: r8a7778/bockw: Move "select RENESAS_INTC_IRQPIN" under SoC (2014-04-14 11:28:43 +0900)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc-cleanup-for-v3.16
> 
> for you to fetch changes up to f492b81777c93b33afe892b424e022022b5bc297:
> 
>   ARM: shmobile: Set clock frequency in HZ from OF nodes (2014-05-14 14:02:21 +0900)

Merged, thanks.


-Olof

[GIT PULL] Renesas ARM Based SoC Cleanups v3.16

[Olof Johansson]

On Fri, May 16, 2014 at 09:58:46AM +0900, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these Renesas ARM based SoC cleanups v3.16.
> 
> This pull request is based on Renesas ARM Based SoC Updates for v3.16,
> tagged as renesas-soc-for-v3.16, which you have already pulled.
> 
> 
> This series includes dependencies that do not fit easily into the usual
> inter-branch dependencies and as such I have grouped them together in a
> single branch.
> 
> 
> The following changes since commit e35db38d66d1e4007cfc1bb90a05e11b4aaee2a8:
> 
>   ARM: shmobile: r8a7778/bockw: Move "select RENESAS_INTC_IRQPIN" under SoC (2014-04-14 11:28:43 +0900)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc-cleanup-for-v3.16
> 
> for you to fetch changes up to f492b81777c93b33afe892b424e022022b5bc297:
> 
>   ARM: shmobile: Set clock frequency in HZ from OF nodes (2014-05-14 14:02:21 +0900)

Merged, thanks.


-Olof

[GIT PULL] Renesas ARM Based SoC Cleanup for v3.17

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC Cleanup for v3.17.


This pull request is based on 'Renesas ARM Based SoC Header Cleanup for v3.17',
tagged as header-cleanup-for-v3.17, which I have already sent a
pull-request for.


The following changes since commit 62872989bdbf1245d7239b9f4c05a8ee7c775ed5:

  ARM: shmobile: Move rcar-gen2.h, cleanup r8a7790 case (2014-06-17 17:09:40 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git renesas-soc-cleanup-for-v3.17

for you to fetch changes up to d83fa4c9c27c4d8612e39e99506b5420fa05b58b:

  ARM: shmobile: Remove unused r8a7790_init_early() (2014-06-17 19:50:35 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC Cleanup for v3.17

* Use shmobile_init_delay on r8a7790, r7s72100 and EMEV2 SoCs
* Remove unused redundant callbacks on EMEV2 SoC

----------------------------------------------------------------
Magnus Damm (9):
      ARM: shmobile: Update EMEV2 DTS to include CPU frequency
      ARM: shmobile: Use shmobile_init_delay() on EMEV2
      ARM: shmobile: Get rid of redundant EMEV2 mach callbacks
      ARM: shmobile: Update r7s72100 DTS to include CPU frequency
      ARM: shmobile: Use shmobile_init_delay() on Genmai boards
      ARM: shmobile: Use shmobile_init_delay() on r7s72100
      ARM: shmobile: Use r8a7790 DT CPU Frequency in common case
      ARM: shmobile: Use r8a7790 DT CPU Frequency for Lager
      ARM: shmobile: Remove unused r8a7790_init_early()

 arch/arm/boot/dts/emev2.dtsi                    |  2 ++
 arch/arm/boot/dts/r7s72100.dtsi                 |  1 +
 arch/arm/mach-shmobile/board-genmai-reference.c |  2 +-
 arch/arm/mach-shmobile/board-genmai.c           |  2 +-
 arch/arm/mach-shmobile/board-lager-reference.c  |  2 +-
 arch/arm/mach-shmobile/board-lager.c            |  2 +-
 arch/arm/mach-shmobile/include/mach/r7s72100.h  |  1 -
 arch/arm/mach-shmobile/include/mach/r8a7790.h   |  1 -
 arch/arm/mach-shmobile/setup-emev2.c            | 17 ++---------------
 arch/arm/mach-shmobile/setup-r7s72100.c         |  7 +------
 arch/arm/mach-shmobile/setup-r8a7790.c          |  9 +--------
 11 files changed, 11 insertions(+), 35 deletions(-)

[GIT PULL] Renesas ARM Based SoC Cleanup for v3.17

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC Cleanup for v3.17.


This pull request is based on 'Renesas ARM Based SoC Header Cleanup for v3.17',
tagged as header-cleanup-for-v3.17, which I have already sent a
pull-request for.


The following changes since commit 62872989bdbf1245d7239b9f4c05a8ee7c775ed5:

  ARM: shmobile: Move rcar-gen2.h, cleanup r8a7790 case (2014-06-17 17:09:40 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git renesas-soc-cleanup-for-v3.17

for you to fetch changes up to d83fa4c9c27c4d8612e39e99506b5420fa05b58b:

  ARM: shmobile: Remove unused r8a7790_init_early() (2014-06-17 19:50:35 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC Cleanup for v3.17

* Use shmobile_init_delay on r8a7790, r7s72100 and EMEV2 SoCs
* Remove unused redundant callbacks on EMEV2 SoC

----------------------------------------------------------------
Magnus Damm (9):
      ARM: shmobile: Update EMEV2 DTS to include CPU frequency
      ARM: shmobile: Use shmobile_init_delay() on EMEV2
      ARM: shmobile: Get rid of redundant EMEV2 mach callbacks
      ARM: shmobile: Update r7s72100 DTS to include CPU frequency
      ARM: shmobile: Use shmobile_init_delay() on Genmai boards
      ARM: shmobile: Use shmobile_init_delay() on r7s72100
      ARM: shmobile: Use r8a7790 DT CPU Frequency in common case
      ARM: shmobile: Use r8a7790 DT CPU Frequency for Lager
      ARM: shmobile: Remove unused r8a7790_init_early()

 arch/arm/boot/dts/emev2.dtsi                    |  2 ++
 arch/arm/boot/dts/r7s72100.dtsi                 |  1 +
 arch/arm/mach-shmobile/board-genmai-reference.c |  2 +-
 arch/arm/mach-shmobile/board-genmai.c           |  2 +-
 arch/arm/mach-shmobile/board-lager-reference.c  |  2 +-
 arch/arm/mach-shmobile/board-lager.c            |  2 +-
 arch/arm/mach-shmobile/include/mach/r7s72100.h  |  1 -
 arch/arm/mach-shmobile/include/mach/r8a7790.h   |  1 -
 arch/arm/mach-shmobile/setup-emev2.c            | 17 ++---------------
 arch/arm/mach-shmobile/setup-r7s72100.c         |  7 +------
 arch/arm/mach-shmobile/setup-r8a7790.c          |  9 +--------
 11 files changed, 11 insertions(+), 35 deletions(-)

[PATCH 1/9] ARM: shmobile: Update EMEV2 DTS to include CPU frequency

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Add CPU Frequency information to the EMEV2 DTS file. This
will allow us to use the shared C code to on EMEV2 which
reads out the clock frequency from DT and calculates the
delay settings from there.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/emev2.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index e37985f..00eeed3 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -31,11 +31,13 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			clock-frequency = <533000000>;
 		};
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			clock-frequency = <533000000>;
 		};
 	};
 
-- 
2.0.0.rc2

[PATCH 1/9] ARM: shmobile: Update EMEV2 DTS to include CPU frequency

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Add CPU Frequency information to the EMEV2 DTS file. This
will allow us to use the shared C code to on EMEV2 which
reads out the clock frequency from DT and calculates the
delay settings from there.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/emev2.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index e37985f..00eeed3 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -31,11 +31,13 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			clock-frequency = <533000000>;
 		};
 		cpu at 1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			clock-frequency = <533000000>;
 		};
 	};
 
-- 
2.0.0.rc2

[PATCH 2/9] ARM: shmobile: Use shmobile_init_delay() on EMEV2

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Adjust EMEV2 to use shmobile_init_delay() together with
CPU Frequency settings from the DTS.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-emev2.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index 6e4ffa7..e10d34e 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -42,11 +42,6 @@ static void __init emev2_map_io(void)
 	iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc));
 }
 
-static void __init emev2_init_delay(void)
-{
-	shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
-}
-
 static void __init emev2_add_standard_devices_dt(void)
 {
 	of_clk_init(NULL);
@@ -63,7 +58,7 @@ extern struct smp_operations emev2_smp_ops;
 DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
 	.smp		= smp_ops(emev2_smp_ops),
 	.map_io		= emev2_map_io,
-	.init_early	= emev2_init_delay,
+	.init_early	= shmobile_init_delay,
 	.init_machine	= emev2_add_standard_devices_dt,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= emev2_boards_compat_dt,
-- 
2.0.0.rc2

[PATCH 2/9] ARM: shmobile: Use shmobile_init_delay() on EMEV2

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Adjust EMEV2 to use shmobile_init_delay() together with
CPU Frequency settings from the DTS.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-emev2.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index 6e4ffa7..e10d34e 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -42,11 +42,6 @@ static void __init emev2_map_io(void)
 	iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc));
 }
 
-static void __init emev2_init_delay(void)
-{
-	shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
-}
-
 static void __init emev2_add_standard_devices_dt(void)
 {
 	of_clk_init(NULL);
@@ -63,7 +58,7 @@ extern struct smp_operations emev2_smp_ops;
 DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
 	.smp		= smp_ops(emev2_smp_ops),
 	.map_io		= emev2_map_io,
-	.init_early	= emev2_init_delay,
+	.init_early	= shmobile_init_delay,
 	.init_machine	= emev2_add_standard_devices_dt,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= emev2_boards_compat_dt,
-- 
2.0.0.rc2

[PATCH 3/9] ARM: shmobile: Get rid of redundant EMEV2 mach callbacks

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Update the EMEV2 specific SoC callbacks to get rid
of the calls to of_clk_init() and of_platform_populate().
Those calls are by default executed by the functions in
the shared ARM code in case the SoC specific mach
callbacks are NULL.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-emev2.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index e10d34e..b06a9e8 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -16,10 +16,9 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
-#include <linux/clk-provider.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/of_platform.h>
+#include <linux/mm.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -42,12 +41,6 @@ static void __init emev2_map_io(void)
 	iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc));
 }
 
-static void __init emev2_add_standard_devices_dt(void)
-{
-	of_clk_init(NULL);
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
 static const char *emev2_boards_compat_dt[] __initconst = {
 	"renesas,emev2",
 	NULL,
@@ -59,7 +52,6 @@ DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
 	.smp		= smp_ops(emev2_smp_ops),
 	.map_io		= emev2_map_io,
 	.init_early	= shmobile_init_delay,
-	.init_machine	= emev2_add_standard_devices_dt,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= emev2_boards_compat_dt,
 MACHINE_END
-- 
2.0.0.rc2

[PATCH 3/9] ARM: shmobile: Get rid of redundant EMEV2 mach callbacks

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Update the EMEV2 specific SoC callbacks to get rid
of the calls to of_clk_init() and of_platform_populate().
Those calls are by default executed by the functions in
the shared ARM code in case the SoC specific mach
callbacks are NULL.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-emev2.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index e10d34e..b06a9e8 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -16,10 +16,9 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
-#include <linux/clk-provider.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/of_platform.h>
+#include <linux/mm.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -42,12 +41,6 @@ static void __init emev2_map_io(void)
 	iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc));
 }
 
-static void __init emev2_add_standard_devices_dt(void)
-{
-	of_clk_init(NULL);
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
 static const char *emev2_boards_compat_dt[] __initconst = {
 	"renesas,emev2",
 	NULL,
@@ -59,7 +52,6 @@ DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
 	.smp		= smp_ops(emev2_smp_ops),
 	.map_io		= emev2_map_io,
 	.init_early	= shmobile_init_delay,
-	.init_machine	= emev2_add_standard_devices_dt,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= emev2_boards_compat_dt,
 MACHINE_END
-- 
2.0.0.rc2

[PATCH 4/9] ARM: shmobile: Update r7s72100 DTS to include CPU frequency

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Add CPU Frequency information to the r7s72100 DTS file. This
will allow us to use the shared C code on r7s72100 and Genmai
which reads out the clock frequency from DT and calculates the
delay settings from there.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index f50fbc8..bdee225 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -144,6 +144,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			clock-frequency = <400000000>;
 		};
 	};
 
-- 
2.0.0.rc2

[PATCH 4/9] ARM: shmobile: Update r7s72100 DTS to include CPU frequency

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Add CPU Frequency information to the r7s72100 DTS file. This
will allow us to use the shared C code on r7s72100 and Genmai
which reads out the clock frequency from DT and calculates the
delay settings from there.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index f50fbc8..bdee225 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -144,6 +144,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			clock-frequency = <400000000>;
 		};
 	};
 
-- 
2.0.0.rc2

[PATCH 5/9] ARM: shmobile: Use shmobile_init_delay() on Genmai boards

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Adjust Genmai board support to use shmobile_init_delay() together
with r7s72100 CPU Frequency settings from the DTS.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-genmai-reference.c | 2 +-
 arch/arm/mach-shmobile/board-genmai.c           | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-genmai-reference.c b/arch/arm/mach-shmobile/board-genmai-reference.c
index d341ef0..c06dc5c 100644
--- a/arch/arm/mach-shmobile/board-genmai-reference.c
+++ b/arch/arm/mach-shmobile/board-genmai-reference.c
@@ -47,7 +47,7 @@ static const char * const genmai_boards_compat_dt[] __initconst = {
 };
 
 DT_MACHINE_START(GENMAI_DT, "genmai")
-	.init_early	= r7s72100_init_early,
+	.init_early	= shmobile_init_delay,
 	.init_machine	= genmai_add_standard_devices,
 	.dt_compat	= genmai_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-genmai.c b/arch/arm/mach-shmobile/board-genmai.c
index f0a8eca..a0994f3 100644
--- a/arch/arm/mach-shmobile/board-genmai.c
+++ b/arch/arm/mach-shmobile/board-genmai.c
@@ -154,7 +154,7 @@ static const char * const genmai_boards_compat_dt[] __initconst = {
 };
 
 DT_MACHINE_START(GENMAI_DT, "genmai")
-	.init_early	= r7s72100_init_early,
+	.init_early	= shmobile_init_delay,
 	.init_machine	= genmai_add_standard_devices,
 	.dt_compat	= genmai_boards_compat_dt,
 MACHINE_END
-- 
2.0.0.rc2

[PATCH 5/9] ARM: shmobile: Use shmobile_init_delay() on Genmai boards

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Adjust Genmai board support to use shmobile_init_delay() together
with r7s72100 CPU Frequency settings from the DTS.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-genmai-reference.c | 2 +-
 arch/arm/mach-shmobile/board-genmai.c           | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-genmai-reference.c b/arch/arm/mach-shmobile/board-genmai-reference.c
index d341ef0..c06dc5c 100644
--- a/arch/arm/mach-shmobile/board-genmai-reference.c
+++ b/arch/arm/mach-shmobile/board-genmai-reference.c
@@ -47,7 +47,7 @@ static const char * const genmai_boards_compat_dt[] __initconst = {
 };
 
 DT_MACHINE_START(GENMAI_DT, "genmai")
-	.init_early	= r7s72100_init_early,
+	.init_early	= shmobile_init_delay,
 	.init_machine	= genmai_add_standard_devices,
 	.dt_compat	= genmai_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-genmai.c b/arch/arm/mach-shmobile/board-genmai.c
index f0a8eca..a0994f3 100644
--- a/arch/arm/mach-shmobile/board-genmai.c
+++ b/arch/arm/mach-shmobile/board-genmai.c
@@ -154,7 +154,7 @@ static const char * const genmai_boards_compat_dt[] __initconst = {
 };
 
 DT_MACHINE_START(GENMAI_DT, "genmai")
-	.init_early	= r7s72100_init_early,
+	.init_early	= shmobile_init_delay,
 	.init_machine	= genmai_add_standard_devices,
 	.dt_compat	= genmai_boards_compat_dt,
 MACHINE_END
-- 
2.0.0.rc2

[PATCH 6/9] ARM: shmobile: Use shmobile_init_delay() on r7s72100

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Adjust the r7s72100 SoC support code to use shmobile_init_delay()
together with CPU Frequency settings from the DTS. Get rid of the
C code version.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/r7s72100.h | 1 -
 arch/arm/mach-shmobile/setup-r7s72100.c        | 7 +------
 2 files changed, 1 insertion(+), 7 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/r7s72100.h b/arch/arm/mach-shmobile/include/mach/r7s72100.h
index 5f34b20..efb723c 100644
--- a/arch/arm/mach-shmobile/include/mach/r7s72100.h
+++ b/arch/arm/mach-shmobile/include/mach/r7s72100.h
@@ -3,6 +3,5 @@
 
 void r7s72100_add_dt_devices(void);
 void r7s72100_clock_init(void);
-void r7s72100_init_early(void);
 
 #endif /* __ASM_R7S72100_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
index 17a74d3..a55d68d 100644
--- a/arch/arm/mach-shmobile/setup-r7s72100.c
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -43,11 +43,6 @@ void __init r7s72100_add_dt_devices(void)
 	r7s72100_register_mtu2();
 }
 
-void __init r7s72100_init_early(void)
-{
-	shmobile_setup_delay(400, 1, 3); /* Cortex-A9 @ 400MHz */
-}
-
 #ifdef CONFIG_USE_OF
 static const char *r7s72100_boards_compat_dt[] __initdata = {
 	"renesas,r7s72100",
@@ -55,7 +50,7 @@ static const char *r7s72100_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)")
-	.init_early	= r7s72100_init_early,
+	.init_early	= shmobile_init_delay,
 	.dt_compat	= r7s72100_boards_compat_dt,
 MACHINE_END
 #endif /* CONFIG_USE_OF */
-- 
2.0.0.rc2

[PATCH 6/9] ARM: shmobile: Use shmobile_init_delay() on r7s72100

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Adjust the r7s72100 SoC support code to use shmobile_init_delay()
together with CPU Frequency settings from the DTS. Get rid of the
C code version.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/r7s72100.h | 1 -
 arch/arm/mach-shmobile/setup-r7s72100.c        | 7 +------
 2 files changed, 1 insertion(+), 7 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/r7s72100.h b/arch/arm/mach-shmobile/include/mach/r7s72100.h
index 5f34b20..efb723c 100644
--- a/arch/arm/mach-shmobile/include/mach/r7s72100.h
+++ b/arch/arm/mach-shmobile/include/mach/r7s72100.h
@@ -3,6 +3,5 @@
 
 void r7s72100_add_dt_devices(void);
 void r7s72100_clock_init(void);
-void r7s72100_init_early(void);
 
 #endif /* __ASM_R7S72100_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
index 17a74d3..a55d68d 100644
--- a/arch/arm/mach-shmobile/setup-r7s72100.c
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -43,11 +43,6 @@ void __init r7s72100_add_dt_devices(void)
 	r7s72100_register_mtu2();
 }
 
-void __init r7s72100_init_early(void)
-{
-	shmobile_setup_delay(400, 1, 3); /* Cortex-A9 @ 400MHz */
-}
-
 #ifdef CONFIG_USE_OF
 static const char *r7s72100_boards_compat_dt[] __initdata = {
 	"renesas,r7s72100",
@@ -55,7 +50,7 @@ static const char *r7s72100_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)")
-	.init_early	= r7s72100_init_early,
+	.init_early	= shmobile_init_delay,
 	.dt_compat	= r7s72100_boards_compat_dt,
 MACHINE_END
 #endif /* CONFIG_USE_OF */
-- 
2.0.0.rc2

[PATCH 7/9] ARM: shmobile: Use r8a7790 DT CPU Frequency in common case

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Convert the common C-code-less r8a7790 DT board support
to use shmobile_init_delay() to be able to migrate away
from per-SoC delay setup functions.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7790.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 4212c8d..9c2bc16 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -324,7 +324,7 @@ static const char * const r8a7790_boards_compat_dt[] __initconst = {
 
 DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
 	.smp		= smp_ops(r8a7790_smp_ops),
-	.init_early	= r8a7790_init_early,
+	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
 	.dt_compat	= r8a7790_boards_compat_dt,
 MACHINE_END
-- 
2.0.0.rc2

[PATCH 7/9] ARM: shmobile: Use r8a7790 DT CPU Frequency in common case

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Convert the common C-code-less r8a7790 DT board support
to use shmobile_init_delay() to be able to migrate away
from per-SoC delay setup functions.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7790.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 4212c8d..9c2bc16 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -324,7 +324,7 @@ static const char * const r8a7790_boards_compat_dt[] __initconst = {
 
 DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
 	.smp		= smp_ops(r8a7790_smp_ops),
-	.init_early	= r8a7790_init_early,
+	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
 	.dt_compat	= r8a7790_boards_compat_dt,
 MACHINE_END
-- 
2.0.0.rc2

[PATCH 8/9] ARM: shmobile: Use r8a7790 DT CPU Frequency for Lager

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Convert the Lager board support to use shmobile_init_delay()
to be able to migrate away from per-SoC delay setup functions.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-lager-reference.c | 2 +-
 arch/arm/mach-shmobile/board-lager.c           | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index 4f0af91..e30017b 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -129,7 +129,7 @@ static const char *lager_boards_compat_dt[] __initdata = {
 
 DT_MACHINE_START(LAGER_DT, "lager")
 	.smp		= smp_ops(r8a7790_smp_ops),
-	.init_early	= r8a7790_init_early,
+	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
 	.init_machine	= lager_add_standard_devices,
 	.init_late	= shmobile_init_late,
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index 83bbb5c..72785cc 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -887,7 +887,7 @@ static const char * const lager_boards_compat_dt[] __initconst = {
 
 DT_MACHINE_START(LAGER_DT, "lager")
 	.smp		= smp_ops(r8a7790_smp_ops),
-	.init_early	= r8a7790_init_early,
+	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
 	.init_machine	= lager_init,
 	.init_late	= shmobile_init_late,
-- 
2.0.0.rc2

[PATCH 8/9] ARM: shmobile: Use r8a7790 DT CPU Frequency for Lager

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Convert the Lager board support to use shmobile_init_delay()
to be able to migrate away from per-SoC delay setup functions.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-lager-reference.c | 2 +-
 arch/arm/mach-shmobile/board-lager.c           | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index 4f0af91..e30017b 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -129,7 +129,7 @@ static const char *lager_boards_compat_dt[] __initdata = {
 
 DT_MACHINE_START(LAGER_DT, "lager")
 	.smp		= smp_ops(r8a7790_smp_ops),
-	.init_early	= r8a7790_init_early,
+	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
 	.init_machine	= lager_add_standard_devices,
 	.init_late	= shmobile_init_late,
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index 83bbb5c..72785cc 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -887,7 +887,7 @@ static const char * const lager_boards_compat_dt[] __initconst = {
 
 DT_MACHINE_START(LAGER_DT, "lager")
 	.smp		= smp_ops(r8a7790_smp_ops),
-	.init_early	= r8a7790_init_early,
+	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
 	.init_machine	= lager_init,
 	.init_late	= shmobile_init_late,
-- 
2.0.0.rc2

[PATCH 9/9] ARM: shmobile: Remove unused r8a7790_init_early()

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Remove the now unused r8a7790_init_early() function.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/r8a7790.h | 1 -
 arch/arm/mach-shmobile/setup-r8a7790.c        | 7 -------
 2 files changed, 8 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h
index d755544..459827f 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h
@@ -31,7 +31,6 @@ void r8a7790_add_dt_devices(void);
 void r8a7790_clock_init(void);
 void r8a7790_pinmux_init(void);
 void r8a7790_pm_init(void);
-void r8a7790_init_early(void);
 extern struct smp_operations r8a7790_smp_ops;
 
 #endif /* __ASM_R8A7790_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 9c2bc16..ee5daccf3 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -308,13 +308,6 @@ void __init r8a7790_add_standard_devices(void)
 	r8a7790_register_audio_dmac(1);
 }
 
-void __init r8a7790_init_early(void)
-{
-#ifndef CONFIG_ARM_ARCH_TIMER
-	shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
-#endif
-}
-
 #ifdef CONFIG_USE_OF
 
 static const char * const r8a7790_boards_compat_dt[] __initconst = {
-- 
2.0.0.rc2

[PATCH 9/9] ARM: shmobile: Remove unused r8a7790_init_early()

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Remove the now unused r8a7790_init_early() function.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/r8a7790.h | 1 -
 arch/arm/mach-shmobile/setup-r8a7790.c        | 7 -------
 2 files changed, 8 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h
index d755544..459827f 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h
@@ -31,7 +31,6 @@ void r8a7790_add_dt_devices(void);
 void r8a7790_clock_init(void);
 void r8a7790_pinmux_init(void);
 void r8a7790_pm_init(void);
-void r8a7790_init_early(void);
 extern struct smp_operations r8a7790_smp_ops;
 
 #endif /* __ASM_R8A7790_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 9c2bc16..ee5daccf3 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -308,13 +308,6 @@ void __init r8a7790_add_standard_devices(void)
 	r8a7790_register_audio_dmac(1);
 }
 
-void __init r8a7790_init_early(void)
-{
-#ifndef CONFIG_ARM_ARCH_TIMER
-	shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
-#endif
-}
-
 #ifdef CONFIG_USE_OF
 
 static const char * const r8a7790_boards_compat_dt[] __initconst = {
-- 
2.0.0.rc2

Re: [GIT PULL] Renesas ARM Based SoC Cleanup for v3.17

[Olof Johansson]

On Mon, Jun 23, 2014 at 11:26:54AM +0900, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these Renesas ARM based SoC Cleanup for v3.17.
> 
> 
> This pull request is based on 'Renesas ARM Based SoC Header Cleanup for v3.17',
> tagged as header-cleanup-for-v3.17, which I have already sent a
> pull-request for.
> 
> 
> The following changes since commit 62872989bdbf1245d7239b9f4c05a8ee7c775ed5:
> 
>   ARM: shmobile: Move rcar-gen2.h, cleanup r8a7790 case (2014-06-17 17:09:40 +0900)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git renesas-soc-cleanup-for-v3.17

Merged, thanks.

-Olof

[GIT PULL] Renesas ARM Based SoC Cleanup for v3.17

[Olof Johansson]

On Mon, Jun 23, 2014 at 11:26:54AM +0900, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these Renesas ARM based SoC Cleanup for v3.17.
> 
> 
> This pull request is based on 'Renesas ARM Based SoC Header Cleanup for v3.17',
> tagged as header-cleanup-for-v3.17, which I have already sent a
> pull-request for.
> 
> 
> The following changes since commit 62872989bdbf1245d7239b9f4c05a8ee7c775ed5:
> 
>   ARM: shmobile: Move rcar-gen2.h, cleanup r8a7790 case (2014-06-17 17:09:40 +0900)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git renesas-soc-cleanup-for-v3.17

Merged, thanks.

-Olof

[GIT PULL] Renesas ARM Based SoC Cleanup Updates for v3.18

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC cleanup updates for v3.18.

This pull request is based on
"Renesas ARM Based SoC DT Timers Updates for v3.18",
tagged as dt-timers-for-v3.18,
which I have already sent a pull-request for.

This is a rebase of changes that didn't quite make it into v3.17.
These cleanups depend on changes in dt-timers-for-v3.18 and rebasing
to remove that dependency is not entirely trivial.


The following changes since commit 9dddfcfacaadb5491b62233b893b510fa00da4e0:

  ARM: shmobile: genmai-reference: Enable MTU2 in device tree (2014-08-17 09:02:54 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v3.18

for you to fetch changes up to ad8c3af8b75ff26c5c887f2101da653bdcd53a38:

  ARM: shmobile: r7s72100: Remove legacy board support (2014-08-17 09:57:08 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC Cleanup Updates for v3.18

* Remove Genmai board code

----------------------------------------------------------------
Laurent Pinchart (3):
      ARM: shmobile: r7s72100: genmai: Remove reference board file
      ARM: shmobile: r7s72100: genmai: Remove legacy board file
      ARM: shmobile: r7s72100: Remove legacy board support

 arch/arm/mach-shmobile/Kconfig                  |  17 --
 arch/arm/mach-shmobile/Makefile                 |   3 -
 arch/arm/mach-shmobile/Makefile.boot            |   1 -
 arch/arm/mach-shmobile/board-genmai-reference.c |  35 ----
 arch/arm/mach-shmobile/board-genmai.c           | 173 ------------------
 arch/arm/mach-shmobile/clock-r7s72100.c         | 231 ------------------------
 arch/arm/mach-shmobile/r7s72100.h               |   6 -
 arch/arm/mach-shmobile/setup-r7s72100.c         |   2 -
 8 files changed, 468 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/board-genmai-reference.c
 delete mode 100644 arch/arm/mach-shmobile/board-genmai.c
 delete mode 100644 arch/arm/mach-shmobile/clock-r7s72100.c
 delete mode 100644 arch/arm/mach-shmobile/r7s72100.h

[GIT PULL] Renesas ARM Based SoC Cleanup Updates for v3.18

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC cleanup updates for v3.18.

This pull request is based on
"Renesas ARM Based SoC DT Timers Updates for v3.18",
tagged as dt-timers-for-v3.18,
which I have already sent a pull-request for.

This is a rebase of changes that didn't quite make it into v3.17.
These cleanups depend on changes in dt-timers-for-v3.18 and rebasing
to remove that dependency is not entirely trivial.


The following changes since commit 9dddfcfacaadb5491b62233b893b510fa00da4e0:

  ARM: shmobile: genmai-reference: Enable MTU2 in device tree (2014-08-17 09:02:54 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v3.18

for you to fetch changes up to ad8c3af8b75ff26c5c887f2101da653bdcd53a38:

  ARM: shmobile: r7s72100: Remove legacy board support (2014-08-17 09:57:08 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC Cleanup Updates for v3.18

* Remove Genmai board code

----------------------------------------------------------------
Laurent Pinchart (3):
      ARM: shmobile: r7s72100: genmai: Remove reference board file
      ARM: shmobile: r7s72100: genmai: Remove legacy board file
      ARM: shmobile: r7s72100: Remove legacy board support

 arch/arm/mach-shmobile/Kconfig                  |  17 --
 arch/arm/mach-shmobile/Makefile                 |   3 -
 arch/arm/mach-shmobile/Makefile.boot            |   1 -
 arch/arm/mach-shmobile/board-genmai-reference.c |  35 ----
 arch/arm/mach-shmobile/board-genmai.c           | 173 ------------------
 arch/arm/mach-shmobile/clock-r7s72100.c         | 231 ------------------------
 arch/arm/mach-shmobile/r7s72100.h               |   6 -
 arch/arm/mach-shmobile/setup-r7s72100.c         |   2 -
 8 files changed, 468 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/board-genmai-reference.c
 delete mode 100644 arch/arm/mach-shmobile/board-genmai.c
 delete mode 100644 arch/arm/mach-shmobile/clock-r7s72100.c
 delete mode 100644 arch/arm/mach-shmobile/r7s72100.h

[PATCH 1/3] ARM: shmobile: r7s72100: genmai: Remove reference board file

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The genmai board now boots using the generic R7S72100 DT machine with
the same feature set as the board file. Remove the board file.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Wolfram Sang <wsa@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Makefile                 |  1 -
 arch/arm/mach-shmobile/board-genmai-reference.c | 35 -------------------------
 2 files changed, 36 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/board-genmai-reference.c

diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index fe3878a..a058ec3 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -63,7 +63,6 @@ obj-$(CONFIG_ARCH_SH7372)	+= entry-intc.o
 
 # Board objects
 ifdef CONFIG_ARCH_SHMOBILE_MULTI
-obj-$(CONFIG_MACH_GENMAI)	+= board-genmai-reference.o
 obj-$(CONFIG_MACH_KOELSCH)	+= board-koelsch-reference.o
 obj-$(CONFIG_MACH_LAGER)	+= board-lager-reference.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen-reference.o
diff --git a/arch/arm/mach-shmobile/board-genmai-reference.c b/arch/arm/mach-shmobile/board-genmai-reference.c
deleted file mode 100644
index bc52677..0000000
--- a/arch/arm/mach-shmobile/board-genmai-reference.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Genmai board support
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/kernel.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-static const char * const genmai_boards_compat_dt[] __initconst = {
-	"renesas,genmai",
-	NULL,
-};
-
-DT_MACHINE_START(GENMAI_DT, "genmai")
-	.init_early	= shmobile_init_delay,
-	.dt_compat	= genmai_boards_compat_dt,
-MACHINE_END
-- 
2.0.1

[PATCH 1/3] ARM: shmobile: r7s72100: genmai: Remove reference board file

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The genmai board now boots using the generic R7S72100 DT machine with
the same feature set as the board file. Remove the board file.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Wolfram Sang <wsa@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Makefile                 |  1 -
 arch/arm/mach-shmobile/board-genmai-reference.c | 35 -------------------------
 2 files changed, 36 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/board-genmai-reference.c

diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index fe3878a..a058ec3 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -63,7 +63,6 @@ obj-$(CONFIG_ARCH_SH7372)	+= entry-intc.o
 
 # Board objects
 ifdef CONFIG_ARCH_SHMOBILE_MULTI
-obj-$(CONFIG_MACH_GENMAI)	+= board-genmai-reference.o
 obj-$(CONFIG_MACH_KOELSCH)	+= board-koelsch-reference.o
 obj-$(CONFIG_MACH_LAGER)	+= board-lager-reference.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen-reference.o
diff --git a/arch/arm/mach-shmobile/board-genmai-reference.c b/arch/arm/mach-shmobile/board-genmai-reference.c
deleted file mode 100644
index bc52677..0000000
--- a/arch/arm/mach-shmobile/board-genmai-reference.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Genmai board support
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/kernel.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-static const char * const genmai_boards_compat_dt[] __initconst = {
-	"renesas,genmai",
-	NULL,
-};
-
-DT_MACHINE_START(GENMAI_DT, "genmai")
-	.init_early	= shmobile_init_delay,
-	.dt_compat	= genmai_boards_compat_dt,
-MACHINE_END
-- 
2.0.1

[PATCH 2/3] ARM: shmobile: r7s72100: genmai: Remove legacy board file

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The genmai board now boots using DT and multiplatform kernel with the
same feature set as the legacy board. Remove the legacy board file and
the board Kconfig option.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Wolfram Sang <wsa@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig        |   9 --
 arch/arm/mach-shmobile/Makefile       |   1 -
 arch/arm/mach-shmobile/board-genmai.c | 173 ----------------------------------
 3 files changed, 183 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/board-genmai.c

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index e15dff7..169bda4 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -43,10 +43,6 @@ config ARCH_R8A7791
 
 comment "Renesas ARM SoCs Board Type"
 
-config MACH_GENMAI
-	bool "Genmai board"
-	depends on ARCH_R7S72100
-
 config MACH_KOELSCH
 	bool "Koelsch board"
 	depends on ARCH_R8A7791
@@ -232,11 +228,6 @@ config MACH_BOCKW_REFERENCE
 
 	   This is intended to aid developers
 
-config MACH_GENMAI
-	bool "Genmai board"
-	depends on ARCH_R7S72100
-	select USE_OF
-
 config MACH_MARZEN
 	bool "MARZEN board"
 	depends on ARCH_R8A7779
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index a058ec3..be5fed2 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -72,7 +72,6 @@ obj-$(CONFIG_MACH_APE6EVM_REFERENCE)	+= board-ape6evm-reference.o
 obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
 obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
 obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
-obj-$(CONFIG_MACH_GENMAI)	+= board-genmai.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_LAGER)	+= board-lager.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
diff --git a/arch/arm/mach-shmobile/board-genmai.c b/arch/arm/mach-shmobile/board-genmai.c
deleted file mode 100644
index ba545fc..0000000
--- a/arch/arm/mach-shmobile/board-genmai.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * Genmai board support
- *
- * Copyright (C) 2013-2014  Renesas Solutions Corp.
- * Copyright (C) 2013  Magnus Damm
- * Copyright (C) 2014  Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_eth.h>
-#include <linux/sh_timer.h>
-#include <linux/spi/rspi.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "irqs.h"
-#include "r7s72100.h"
-
-/* Ether */
-static const struct sh_eth_plat_data ether_pdata __initconst = {
-	.phy			= 0x00, /* PD60610 */
-	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
-	.phy_interface		= PHY_INTERFACE_MODE_MII,
-	.no_ether_link		= 1
-};
-
-static const struct resource ether_resources[] __initconst = {
-	DEFINE_RES_MEM(0xe8203000, 0x800),
-	DEFINE_RES_MEM(0xe8204800, 0x200),
-	DEFINE_RES_IRQ(gic_iid(359)),
-};
-
-static const struct platform_device_info ether_info __initconst = {
-	.name		= "r7s72100-ether",
-	.id		= -1,
-	.res		= ether_resources,
-	.num_res	= ARRAY_SIZE(ether_resources),
-	.data		= &ether_pdata,
-	.size_data	= sizeof(ether_pdata),
-	.dma_mask	= DMA_BIT_MASK(32),
-};
-
-/* RSPI */
-#define RSPI_RESOURCE(idx, baseaddr, irq)				\
-static const struct resource rspi##idx##_resources[] __initconst = {	\
-	DEFINE_RES_MEM(baseaddr, 0x24),					\
-	DEFINE_RES_IRQ_NAMED(irq, "error"),				\
-	DEFINE_RES_IRQ_NAMED(irq + 1, "rx"),				\
-	DEFINE_RES_IRQ_NAMED(irq + 2, "tx"),				\
-}
-
-RSPI_RESOURCE(0, 0xe800c800, gic_iid(270));
-RSPI_RESOURCE(1, 0xe800d000, gic_iid(273));
-RSPI_RESOURCE(2, 0xe800d800, gic_iid(276));
-RSPI_RESOURCE(3, 0xe800e000, gic_iid(279));
-RSPI_RESOURCE(4, 0xe800e800, gic_iid(282));
-
-static const struct rspi_plat_data rspi_pdata __initconst = {
-	.num_chipselect	= 1,
-};
-
-#define r7s72100_register_rspi(idx)					   \
-	platform_device_register_resndata(NULL, "rspi-rz", idx,            \
-					rspi##idx##_resources,		   \
-					ARRAY_SIZE(rspi##idx##_resources), \
-					&rspi_pdata, sizeof(rspi_pdata))
-
-static const struct spi_board_info spi_info[] __initconst = {
-	{
-		.modalias               = "wm8978",
-		.max_speed_hz           = 5000000,
-		.bus_num                = 4,
-		.chip_select            = 0,
-	},
-};
-
-/* SCIF */
-#define R7S72100_SCIF(index, baseaddr, irq)				\
-static const struct plat_sci_port scif##index##_platform_data = {	\
-	.type		= PORT_SCIF,					\
-	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,		\
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,		\
-	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |	\
-			  SCSCR_REIE,					\
-};									\
-									\
-static struct resource scif##index##_resources[] = {			\
-	DEFINE_RES_MEM(baseaddr, 0x100),				\
-	DEFINE_RES_IRQ(irq + 1),					\
-	DEFINE_RES_IRQ(irq + 2),					\
-	DEFINE_RES_IRQ(irq + 3),					\
-	DEFINE_RES_IRQ(irq),						\
-}									\
-
-R7S72100_SCIF(0, 0xe8007000, gic_iid(221));
-R7S72100_SCIF(1, 0xe8007800, gic_iid(225));
-R7S72100_SCIF(2, 0xe8008000, gic_iid(229));
-R7S72100_SCIF(3, 0xe8008800, gic_iid(233));
-R7S72100_SCIF(4, 0xe8009000, gic_iid(237));
-R7S72100_SCIF(5, 0xe8009800, gic_iid(241));
-R7S72100_SCIF(6, 0xe800a000, gic_iid(245));
-R7S72100_SCIF(7, 0xe800a800, gic_iid(249));
-
-#define r7s72100_register_scif(index)					       \
-	platform_device_register_resndata(NULL, "sh-sci", index,               \
-					  scif##index##_resources,	       \
-					  ARRAY_SIZE(scif##index##_resources), \
-					  &scif##index##_platform_data,	       \
-					  sizeof(scif##index##_platform_data))
-
-static struct resource mtu2_resources[] __initdata = {
-	DEFINE_RES_MEM(0xfcff0000, 0x400),
-	DEFINE_RES_IRQ_NAMED(gic_iid(139), "tgi0a"),
-};
-
-#define r7s72100_register_mtu2()					\
-	platform_device_register_resndata(&platform_bus, "sh-mtu2",	\
-					  -1, mtu2_resources,		\
-					  ARRAY_SIZE(mtu2_resources),	\
-					  NULL, 0)
-
-static void __init genmai_add_standard_devices(void)
-{
-	r7s72100_clock_init();
-	r7s72100_register_mtu2();
-
-	platform_device_register_full(&ether_info);
-
-	r7s72100_register_rspi(0);
-	r7s72100_register_rspi(1);
-	r7s72100_register_rspi(2);
-	r7s72100_register_rspi(3);
-	r7s72100_register_rspi(4);
-	spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
-
-	r7s72100_register_scif(0);
-	r7s72100_register_scif(1);
-	r7s72100_register_scif(2);
-	r7s72100_register_scif(3);
-	r7s72100_register_scif(4);
-	r7s72100_register_scif(5);
-	r7s72100_register_scif(6);
-	r7s72100_register_scif(7);
-}
-
-static const char * const genmai_boards_compat_dt[] __initconst = {
-	"renesas,genmai",
-	NULL,
-};
-
-DT_MACHINE_START(GENMAI_DT, "genmai")
-	.init_early	= shmobile_init_delay,
-	.init_machine	= genmai_add_standard_devices,
-	.dt_compat	= genmai_boards_compat_dt,
-MACHINE_END
-- 
2.0.1

[PATCH 2/3] ARM: shmobile: r7s72100: genmai: Remove legacy board file

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The genmai board now boots using DT and multiplatform kernel with the
same feature set as the legacy board. Remove the legacy board file and
the board Kconfig option.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Wolfram Sang <wsa@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig        |   9 --
 arch/arm/mach-shmobile/Makefile       |   1 -
 arch/arm/mach-shmobile/board-genmai.c | 173 ----------------------------------
 3 files changed, 183 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/board-genmai.c

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index e15dff7..169bda4 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -43,10 +43,6 @@ config ARCH_R8A7791
 
 comment "Renesas ARM SoCs Board Type"
 
-config MACH_GENMAI
-	bool "Genmai board"
-	depends on ARCH_R7S72100
-
 config MACH_KOELSCH
 	bool "Koelsch board"
 	depends on ARCH_R8A7791
@@ -232,11 +228,6 @@ config MACH_BOCKW_REFERENCE
 
 	   This is intended to aid developers
 
-config MACH_GENMAI
-	bool "Genmai board"
-	depends on ARCH_R7S72100
-	select USE_OF
-
 config MACH_MARZEN
 	bool "MARZEN board"
 	depends on ARCH_R8A7779
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index a058ec3..be5fed2 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -72,7 +72,6 @@ obj-$(CONFIG_MACH_APE6EVM_REFERENCE)	+= board-ape6evm-reference.o
 obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
 obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
 obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
-obj-$(CONFIG_MACH_GENMAI)	+= board-genmai.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_LAGER)	+= board-lager.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
diff --git a/arch/arm/mach-shmobile/board-genmai.c b/arch/arm/mach-shmobile/board-genmai.c
deleted file mode 100644
index ba545fc..0000000
--- a/arch/arm/mach-shmobile/board-genmai.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * Genmai board support
- *
- * Copyright (C) 2013-2014  Renesas Solutions Corp.
- * Copyright (C) 2013  Magnus Damm
- * Copyright (C) 2014  Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_eth.h>
-#include <linux/sh_timer.h>
-#include <linux/spi/rspi.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "irqs.h"
-#include "r7s72100.h"
-
-/* Ether */
-static const struct sh_eth_plat_data ether_pdata __initconst = {
-	.phy			= 0x00, /* PD60610 */
-	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
-	.phy_interface		= PHY_INTERFACE_MODE_MII,
-	.no_ether_link		= 1
-};
-
-static const struct resource ether_resources[] __initconst = {
-	DEFINE_RES_MEM(0xe8203000, 0x800),
-	DEFINE_RES_MEM(0xe8204800, 0x200),
-	DEFINE_RES_IRQ(gic_iid(359)),
-};
-
-static const struct platform_device_info ether_info __initconst = {
-	.name		= "r7s72100-ether",
-	.id		= -1,
-	.res		= ether_resources,
-	.num_res	= ARRAY_SIZE(ether_resources),
-	.data		= &ether_pdata,
-	.size_data	= sizeof(ether_pdata),
-	.dma_mask	= DMA_BIT_MASK(32),
-};
-
-/* RSPI */
-#define RSPI_RESOURCE(idx, baseaddr, irq)				\
-static const struct resource rspi##idx##_resources[] __initconst = {	\
-	DEFINE_RES_MEM(baseaddr, 0x24),					\
-	DEFINE_RES_IRQ_NAMED(irq, "error"),				\
-	DEFINE_RES_IRQ_NAMED(irq + 1, "rx"),				\
-	DEFINE_RES_IRQ_NAMED(irq + 2, "tx"),				\
-}
-
-RSPI_RESOURCE(0, 0xe800c800, gic_iid(270));
-RSPI_RESOURCE(1, 0xe800d000, gic_iid(273));
-RSPI_RESOURCE(2, 0xe800d800, gic_iid(276));
-RSPI_RESOURCE(3, 0xe800e000, gic_iid(279));
-RSPI_RESOURCE(4, 0xe800e800, gic_iid(282));
-
-static const struct rspi_plat_data rspi_pdata __initconst = {
-	.num_chipselect	= 1,
-};
-
-#define r7s72100_register_rspi(idx)					   \
-	platform_device_register_resndata(NULL, "rspi-rz", idx,            \
-					rspi##idx##_resources,		   \
-					ARRAY_SIZE(rspi##idx##_resources), \
-					&rspi_pdata, sizeof(rspi_pdata))
-
-static const struct spi_board_info spi_info[] __initconst = {
-	{
-		.modalias               = "wm8978",
-		.max_speed_hz           = 5000000,
-		.bus_num                = 4,
-		.chip_select            = 0,
-	},
-};
-
-/* SCIF */
-#define R7S72100_SCIF(index, baseaddr, irq)				\
-static const struct plat_sci_port scif##index##_platform_data = {	\
-	.type		= PORT_SCIF,					\
-	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,		\
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,		\
-	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |	\
-			  SCSCR_REIE,					\
-};									\
-									\
-static struct resource scif##index##_resources[] = {			\
-	DEFINE_RES_MEM(baseaddr, 0x100),				\
-	DEFINE_RES_IRQ(irq + 1),					\
-	DEFINE_RES_IRQ(irq + 2),					\
-	DEFINE_RES_IRQ(irq + 3),					\
-	DEFINE_RES_IRQ(irq),						\
-}									\
-
-R7S72100_SCIF(0, 0xe8007000, gic_iid(221));
-R7S72100_SCIF(1, 0xe8007800, gic_iid(225));
-R7S72100_SCIF(2, 0xe8008000, gic_iid(229));
-R7S72100_SCIF(3, 0xe8008800, gic_iid(233));
-R7S72100_SCIF(4, 0xe8009000, gic_iid(237));
-R7S72100_SCIF(5, 0xe8009800, gic_iid(241));
-R7S72100_SCIF(6, 0xe800a000, gic_iid(245));
-R7S72100_SCIF(7, 0xe800a800, gic_iid(249));
-
-#define r7s72100_register_scif(index)					       \
-	platform_device_register_resndata(NULL, "sh-sci", index,               \
-					  scif##index##_resources,	       \
-					  ARRAY_SIZE(scif##index##_resources), \
-					  &scif##index##_platform_data,	       \
-					  sizeof(scif##index##_platform_data))
-
-static struct resource mtu2_resources[] __initdata = {
-	DEFINE_RES_MEM(0xfcff0000, 0x400),
-	DEFINE_RES_IRQ_NAMED(gic_iid(139), "tgi0a"),
-};
-
-#define r7s72100_register_mtu2()					\
-	platform_device_register_resndata(&platform_bus, "sh-mtu2",	\
-					  -1, mtu2_resources,		\
-					  ARRAY_SIZE(mtu2_resources),	\
-					  NULL, 0)
-
-static void __init genmai_add_standard_devices(void)
-{
-	r7s72100_clock_init();
-	r7s72100_register_mtu2();
-
-	platform_device_register_full(&ether_info);
-
-	r7s72100_register_rspi(0);
-	r7s72100_register_rspi(1);
-	r7s72100_register_rspi(2);
-	r7s72100_register_rspi(3);
-	r7s72100_register_rspi(4);
-	spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
-
-	r7s72100_register_scif(0);
-	r7s72100_register_scif(1);
-	r7s72100_register_scif(2);
-	r7s72100_register_scif(3);
-	r7s72100_register_scif(4);
-	r7s72100_register_scif(5);
-	r7s72100_register_scif(6);
-	r7s72100_register_scif(7);
-}
-
-static const char * const genmai_boards_compat_dt[] __initconst = {
-	"renesas,genmai",
-	NULL,
-};
-
-DT_MACHINE_START(GENMAI_DT, "genmai")
-	.init_early	= shmobile_init_delay,
-	.init_machine	= genmai_add_standard_devices,
-	.dt_compat	= genmai_boards_compat_dt,
-MACHINE_END
-- 
2.0.1

[PATCH 3/3] ARM: shmobile: r7s72100: Remove legacy board support

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

There's no legacy board anymore, genmai now boots with multiplatform
support only. Remove the leftovers.

Makefile.boot portion pointed out by Paul Bolle.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Wolfram Sang <wsa@sang-engineering.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
[horms+renesas@verge.net.au: squashed in patch containing
 Makefile.boot change]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig          |   8 --
 arch/arm/mach-shmobile/Makefile         |   1 -
 arch/arm/mach-shmobile/Makefile.boot    |   1 -
 arch/arm/mach-shmobile/clock-r7s72100.c | 231 --------------------------------
 arch/arm/mach-shmobile/r7s72100.h       |   6 -
 arch/arm/mach-shmobile/setup-r7s72100.c |   2 -
 6 files changed, 249 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/clock-r7s72100.c
 delete mode 100644 arch/arm/mach-shmobile/r7s72100.h

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 169bda4..5814754 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -145,14 +145,6 @@ config ARCH_R8A7791
 	select SYS_SUPPORTS_SH_CMT
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 
-config ARCH_R7S72100
-	bool "RZ/A1H (R7S72100)"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-	select CPU_V7
-	select SH_CLK_CPG
-	select SYS_SUPPORTS_SH_MTU2
-
 comment "Renesas ARM SoCs Board Type"
 
 config MACH_APE6EVM
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index be5fed2..c7e2ad8 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -31,7 +31,6 @@ obj-$(CONFIG_ARCH_R8A7778)	+= clock-r8a7778.o
 obj-$(CONFIG_ARCH_R8A7779)	+= clock-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)	+= clock-r8a7790.o
 obj-$(CONFIG_ARCH_R8A7791)	+= clock-r8a7791.o
-obj-$(CONFIG_ARCH_R7S72100)	+= clock-r7s72100.o
 endif
 
 # CPU reset vector handling objects
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index ebf97d4..a23e155 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -6,7 +6,6 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
-loadaddr-$(CONFIG_MACH_GENMAI) += 0x08008000
 loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000
 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c
deleted file mode 100644
index 3eb2ec4..0000000
--- a/arch/arm/mach-shmobile/clock-r7s72100.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * r7a72100 clock framework support
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2012  Phil Edworthy
- * Copyright (C) 2011  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-
-#include "common.h"
-#include "r7s72100.h"
-
-/* Frequency Control Registers */
-#define FRQCR		0xfcfe0010
-#define FRQCR2		0xfcfe0014
-/* Standby Control Registers */
-#define STBCR3		0xfcfe0420
-#define STBCR4		0xfcfe0424
-#define STBCR7		0xfcfe0430
-#define STBCR9		0xfcfe0438
-#define STBCR10		0xfcfe043c
-
-#define PLL_RATE 30
-
-static struct clk_mapping cpg_mapping = {
-	.phys	= 0xfcfe0000,
-	.len	= 0x1000,
-};
-
-/* Fixed 32 KHz root clock for RTC */
-static struct clk r_clk = {
-	.rate           = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
-	.rate		= 13330000,
-	.mapping	= &cpg_mapping,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
-	return clk->parent->rate * PLL_RATE;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
-	.recalc		= pll_recalc,
-};
-
-static struct clk pll_clk = {
-	.ops		= &pll_clk_ops,
-	.parent		= &extal_clk,
-	.flags		= CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long bus_recalc(struct clk *clk)
-{
-	return clk->parent->rate / 3;
-}
-
-static struct sh_clk_ops bus_clk_ops = {
-	.recalc		= bus_recalc,
-};
-
-static struct clk bus_clk = {
-	.ops		= &bus_clk_ops,
-	.parent		= &pll_clk,
-	.flags		= CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long peripheral0_recalc(struct clk *clk)
-{
-	return clk->parent->rate / 12;
-}
-
-static struct sh_clk_ops peripheral0_clk_ops = {
-	.recalc		= peripheral0_recalc,
-};
-
-static struct clk peripheral0_clk = {
-	.ops		= &peripheral0_clk_ops,
-	.parent		= &pll_clk,
-	.flags		= CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long peripheral1_recalc(struct clk *clk)
-{
-	return clk->parent->rate / 6;
-}
-
-static struct sh_clk_ops peripheral1_clk_ops = {
-	.recalc		= peripheral1_recalc,
-};
-
-static struct clk peripheral1_clk = {
-	.ops		= &peripheral1_clk_ops,
-	.parent		= &pll_clk,
-	.flags		= CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
-	&r_clk,
-	&extal_clk,
-	&pll_clk,
-	&bus_clk,
-	&peripheral0_clk,
-	&peripheral1_clk,
-};
-
-static int div2[] = { 1, 3, 0, 3 }; /* 1, 2/3, reserve, 1/3 */
-static int multipliers[] = { 1, 2, 1, 1 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
-	.divisors = div2,
-	.nr_divisors = ARRAY_SIZE(div2),
-	.multipliers = multipliers,
-	.nr_multipliers = ARRAY_SIZE(multipliers),
-};
-
-static struct clk_div4_table div4_table = {
-	.div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I,
-	DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
-	SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-/* The mask field specifies the div2 entries that are valid */
-struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I]  = DIV4(FRQCR, 8, 0xB, CLK_ENABLE_REG_16BIT
-					| CLK_ENABLE_ON_INIT),
-};
-
-enum {
-	MSTP107, MSTP106, MSTP105, MSTP104, MSTP103,
-	MSTP97, MSTP96, MSTP95, MSTP94,
-	MSTP74,
-	MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
-	MSTP33,	MSTP_NR
-};
-
-static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP107] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 7, 0), /* RSPI0 */
-	[MSTP106] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 6, 0), /* RSPI1 */
-	[MSTP105] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 5, 0), /* RSPI2 */
-	[MSTP104] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 4, 0), /* RSPI3 */
-	[MSTP103] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 3, 0), /* RSPI4 */
-	[MSTP97] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 7, 0), /* RIIC0 */
-	[MSTP96] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 6, 0), /* RIIC1 */
-	[MSTP95] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 5, 0), /* RIIC2 */
-	[MSTP94] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 4, 0), /* RIIC3 */
-	[MSTP74] = SH_CLK_MSTP8(&peripheral1_clk, STBCR7, 4, 0), /* Ether */
-	[MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
-	[MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
-	[MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
-	[MSTP44] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 4, 0), /* SCIF3 */
-	[MSTP43] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 3, 0), /* SCIF4 */
-	[MSTP42] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 2, 0), /* SCIF5 */
-	[MSTP41] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 1, 0), /* SCIF6 */
-	[MSTP40] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 0, 0), /* SCIF7 */
-	[MSTP33] = SH_CLK_MSTP8(&peripheral0_clk, STBCR3, 3, 0), /* MTU2 */
-};
-
-static struct clk_lookup lookups[] = {
-	/* main clocks */
-	CLKDEV_CON_ID("rclk", &r_clk),
-	CLKDEV_CON_ID("extal", &extal_clk),
-	CLKDEV_CON_ID("pll_clk", &pll_clk),
-	CLKDEV_CON_ID("peripheral_clk", &peripheral1_clk),
-
-	/* DIV4 clocks */
-	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
-
-	/* MSTP clocks */
-	CLKDEV_DEV_ID("rspi-rz.0", &mstp_clks[MSTP107]),
-	CLKDEV_DEV_ID("rspi-rz.1", &mstp_clks[MSTP106]),
-	CLKDEV_DEV_ID("rspi-rz.2", &mstp_clks[MSTP105]),
-	CLKDEV_DEV_ID("rspi-rz.3", &mstp_clks[MSTP104]),
-	CLKDEV_DEV_ID("rspi-rz.4", &mstp_clks[MSTP103]),
-	CLKDEV_DEV_ID("r7s72100-ether", &mstp_clks[MSTP74]),
-
-	/* ICK */
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP47]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP46]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP45]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP44]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[MSTP43]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]),
-	CLKDEV_ICK_ID("fck", "sh-mtu2", &mstp_clks[MSTP33]),
-};
-
-void __init r7s72100_clock_init(void)
-{
-	int k, ret = 0;
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
-	if (!ret)
-		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup rza1 clocks\n");
-}
diff --git a/arch/arm/mach-shmobile/r7s72100.h b/arch/arm/mach-shmobile/r7s72100.h
deleted file mode 100644
index 321ae4e..0000000
--- a/arch/arm/mach-shmobile/r7s72100.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_R7S72100_H__
-#define __ASM_R7S72100_H__
-
-void r7s72100_clock_init(void);
-
-#endif /* __ASM_R7S72100_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
index d898cef..111437d 100644
--- a/arch/arm/mach-shmobile/setup-r7s72100.c
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -24,7 +24,6 @@
 
 #include "common.h"
 
-#ifdef CONFIG_USE_OF
 static const char *r7s72100_boards_compat_dt[] __initdata = {
 	"renesas,r7s72100",
 	NULL,
@@ -34,4 +33,3 @@ DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)")
 	.init_early	= shmobile_init_delay,
 	.dt_compat	= r7s72100_boards_compat_dt,
 MACHINE_END
-#endif /* CONFIG_USE_OF */
-- 
2.0.1

[PATCH 3/3] ARM: shmobile: r7s72100: Remove legacy board support

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

There's no legacy board anymore, genmai now boots with multiplatform
support only. Remove the leftovers.

Makefile.boot portion pointed out by Paul Bolle.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Wolfram Sang <wsa@sang-engineering.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
[horms+renesas at verge.net.au: squashed in patch containing
 Makefile.boot change]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig          |   8 --
 arch/arm/mach-shmobile/Makefile         |   1 -
 arch/arm/mach-shmobile/Makefile.boot    |   1 -
 arch/arm/mach-shmobile/clock-r7s72100.c | 231 --------------------------------
 arch/arm/mach-shmobile/r7s72100.h       |   6 -
 arch/arm/mach-shmobile/setup-r7s72100.c |   2 -
 6 files changed, 249 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/clock-r7s72100.c
 delete mode 100644 arch/arm/mach-shmobile/r7s72100.h

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 169bda4..5814754 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -145,14 +145,6 @@ config ARCH_R8A7791
 	select SYS_SUPPORTS_SH_CMT
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 
-config ARCH_R7S72100
-	bool "RZ/A1H (R7S72100)"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-	select CPU_V7
-	select SH_CLK_CPG
-	select SYS_SUPPORTS_SH_MTU2
-
 comment "Renesas ARM SoCs Board Type"
 
 config MACH_APE6EVM
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index be5fed2..c7e2ad8 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -31,7 +31,6 @@ obj-$(CONFIG_ARCH_R8A7778)	+= clock-r8a7778.o
 obj-$(CONFIG_ARCH_R8A7779)	+= clock-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)	+= clock-r8a7790.o
 obj-$(CONFIG_ARCH_R8A7791)	+= clock-r8a7791.o
-obj-$(CONFIG_ARCH_R7S72100)	+= clock-r7s72100.o
 endif
 
 # CPU reset vector handling objects
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index ebf97d4..a23e155 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -6,7 +6,6 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
-loadaddr-$(CONFIG_MACH_GENMAI) += 0x08008000
 loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000
 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c
deleted file mode 100644
index 3eb2ec4..0000000
--- a/arch/arm/mach-shmobile/clock-r7s72100.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * r7a72100 clock framework support
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2012  Phil Edworthy
- * Copyright (C) 2011  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-
-#include "common.h"
-#include "r7s72100.h"
-
-/* Frequency Control Registers */
-#define FRQCR		0xfcfe0010
-#define FRQCR2		0xfcfe0014
-/* Standby Control Registers */
-#define STBCR3		0xfcfe0420
-#define STBCR4		0xfcfe0424
-#define STBCR7		0xfcfe0430
-#define STBCR9		0xfcfe0438
-#define STBCR10		0xfcfe043c
-
-#define PLL_RATE 30
-
-static struct clk_mapping cpg_mapping = {
-	.phys	= 0xfcfe0000,
-	.len	= 0x1000,
-};
-
-/* Fixed 32 KHz root clock for RTC */
-static struct clk r_clk = {
-	.rate           = 32768,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk extal_clk = {
-	.rate		= 13330000,
-	.mapping	= &cpg_mapping,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
-	return clk->parent->rate * PLL_RATE;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
-	.recalc		= pll_recalc,
-};
-
-static struct clk pll_clk = {
-	.ops		= &pll_clk_ops,
-	.parent		= &extal_clk,
-	.flags		= CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long bus_recalc(struct clk *clk)
-{
-	return clk->parent->rate / 3;
-}
-
-static struct sh_clk_ops bus_clk_ops = {
-	.recalc		= bus_recalc,
-};
-
-static struct clk bus_clk = {
-	.ops		= &bus_clk_ops,
-	.parent		= &pll_clk,
-	.flags		= CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long peripheral0_recalc(struct clk *clk)
-{
-	return clk->parent->rate / 12;
-}
-
-static struct sh_clk_ops peripheral0_clk_ops = {
-	.recalc		= peripheral0_recalc,
-};
-
-static struct clk peripheral0_clk = {
-	.ops		= &peripheral0_clk_ops,
-	.parent		= &pll_clk,
-	.flags		= CLK_ENABLE_ON_INIT,
-};
-
-static unsigned long peripheral1_recalc(struct clk *clk)
-{
-	return clk->parent->rate / 6;
-}
-
-static struct sh_clk_ops peripheral1_clk_ops = {
-	.recalc		= peripheral1_recalc,
-};
-
-static struct clk peripheral1_clk = {
-	.ops		= &peripheral1_clk_ops,
-	.parent		= &pll_clk,
-	.flags		= CLK_ENABLE_ON_INIT,
-};
-
-struct clk *main_clks[] = {
-	&r_clk,
-	&extal_clk,
-	&pll_clk,
-	&bus_clk,
-	&peripheral0_clk,
-	&peripheral1_clk,
-};
-
-static int div2[] = { 1, 3, 0, 3 }; /* 1, 2/3, reserve, 1/3 */
-static int multipliers[] = { 1, 2, 1, 1 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
-	.divisors = div2,
-	.nr_divisors = ARRAY_SIZE(div2),
-	.multipliers = multipliers,
-	.nr_multipliers = ARRAY_SIZE(multipliers),
-};
-
-static struct clk_div4_table div4_table = {
-	.div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_I,
-	DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
-	SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
-
-/* The mask field specifies the div2 entries that are valid */
-struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I]  = DIV4(FRQCR, 8, 0xB, CLK_ENABLE_REG_16BIT
-					| CLK_ENABLE_ON_INIT),
-};
-
-enum {
-	MSTP107, MSTP106, MSTP105, MSTP104, MSTP103,
-	MSTP97, MSTP96, MSTP95, MSTP94,
-	MSTP74,
-	MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
-	MSTP33,	MSTP_NR
-};
-
-static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP107] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 7, 0), /* RSPI0 */
-	[MSTP106] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 6, 0), /* RSPI1 */
-	[MSTP105] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 5, 0), /* RSPI2 */
-	[MSTP104] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 4, 0), /* RSPI3 */
-	[MSTP103] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 3, 0), /* RSPI4 */
-	[MSTP97] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 7, 0), /* RIIC0 */
-	[MSTP96] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 6, 0), /* RIIC1 */
-	[MSTP95] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 5, 0), /* RIIC2 */
-	[MSTP94] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 4, 0), /* RIIC3 */
-	[MSTP74] = SH_CLK_MSTP8(&peripheral1_clk, STBCR7, 4, 0), /* Ether */
-	[MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
-	[MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
-	[MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
-	[MSTP44] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 4, 0), /* SCIF3 */
-	[MSTP43] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 3, 0), /* SCIF4 */
-	[MSTP42] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 2, 0), /* SCIF5 */
-	[MSTP41] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 1, 0), /* SCIF6 */
-	[MSTP40] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 0, 0), /* SCIF7 */
-	[MSTP33] = SH_CLK_MSTP8(&peripheral0_clk, STBCR3, 3, 0), /* MTU2 */
-};
-
-static struct clk_lookup lookups[] = {
-	/* main clocks */
-	CLKDEV_CON_ID("rclk", &r_clk),
-	CLKDEV_CON_ID("extal", &extal_clk),
-	CLKDEV_CON_ID("pll_clk", &pll_clk),
-	CLKDEV_CON_ID("peripheral_clk", &peripheral1_clk),
-
-	/* DIV4 clocks */
-	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
-
-	/* MSTP clocks */
-	CLKDEV_DEV_ID("rspi-rz.0", &mstp_clks[MSTP107]),
-	CLKDEV_DEV_ID("rspi-rz.1", &mstp_clks[MSTP106]),
-	CLKDEV_DEV_ID("rspi-rz.2", &mstp_clks[MSTP105]),
-	CLKDEV_DEV_ID("rspi-rz.3", &mstp_clks[MSTP104]),
-	CLKDEV_DEV_ID("rspi-rz.4", &mstp_clks[MSTP103]),
-	CLKDEV_DEV_ID("r7s72100-ether", &mstp_clks[MSTP74]),
-
-	/* ICK */
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP47]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP46]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP45]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP44]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[MSTP43]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]),
-	CLKDEV_ICK_ID("fck", "sh-mtu2", &mstp_clks[MSTP33]),
-};
-
-void __init r7s72100_clock_init(void)
-{
-	int k, ret = 0;
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
-	if (!ret)
-		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup rza1 clocks\n");
-}
diff --git a/arch/arm/mach-shmobile/r7s72100.h b/arch/arm/mach-shmobile/r7s72100.h
deleted file mode 100644
index 321ae4e..0000000
--- a/arch/arm/mach-shmobile/r7s72100.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_R7S72100_H__
-#define __ASM_R7S72100_H__
-
-void r7s72100_clock_init(void);
-
-#endif /* __ASM_R7S72100_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
index d898cef..111437d 100644
--- a/arch/arm/mach-shmobile/setup-r7s72100.c
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -24,7 +24,6 @@
 
 #include "common.h"
 
-#ifdef CONFIG_USE_OF
 static const char *r7s72100_boards_compat_dt[] __initdata = {
 	"renesas,r7s72100",
 	NULL,
@@ -34,4 +33,3 @@ DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)")
 	.init_early	= shmobile_init_delay,
 	.dt_compat	= r7s72100_boards_compat_dt,
 MACHINE_END
-#endif /* CONFIG_USE_OF */
-- 
2.0.1

Re: [GIT PULL] Renesas ARM Based SoC Cleanup Updates for v3.18

[Arnd Bergmann]

On Saturday 23 August 2014, Simon Horman wrote:
> Please consider these Renesas ARM based SoC cleanup updates for v3.18.
> 
> This pull request is based on
> "Renesas ARM Based SoC DT Timers Updates for v3.18",
> tagged as dt-timers-for-v3.18,
> which I have already sent a pull-request for.
> 
> This is a rebase of changes that didn't quite make it into v3.17.
> These cleanups depend on changes in dt-timers-for-v3.18 and rebasing
> to remove that dependency is not entirely trivial.
> 


I hesitated a bit for this one and the dt-timers-for-v3.18 branch, as they
don't really fit into our scheme, and I'd much prefer having the cleanups
done first, while everything else isn't that important.

In the end, I stuck it all into next/soc.

That's the last one of the outstanding shmobile pull requests that I'm
aware of. Again, sorry for taking my time with them. Please check that
I didn't miss anything you wanted me to pull.

Thanks,

	Arnd

[GIT PULL] Renesas ARM Based SoC Cleanup Updates for v3.18

[Arnd Bergmann]

On Saturday 23 August 2014, Simon Horman wrote:
> Please consider these Renesas ARM based SoC cleanup updates for v3.18.
> 
> This pull request is based on
> "Renesas ARM Based SoC DT Timers Updates for v3.18",
> tagged as dt-timers-for-v3.18,
> which I have already sent a pull-request for.
> 
> This is a rebase of changes that didn't quite make it into v3.17.
> These cleanups depend on changes in dt-timers-for-v3.18 and rebasing
> to remove that dependency is not entirely trivial.
> 


I hesitated a bit for this one and the dt-timers-for-v3.18 branch, as they
don't really fit into our scheme, and I'd much prefer having the cleanups
done first, while everything else isn't that important.

In the end, I stuck it all into next/soc.

That's the last one of the outstanding shmobile pull requests that I'm
aware of. Again, sorry for taking my time with them. Please check that
I didn't miss anything you wanted me to pull.

Thanks,

	Arnd

Re: [GIT PULL] Renesas ARM Based SoC Cleanup Updates for v3.18

[Simon Horman]

On Fri, Sep 05, 2014 at 06:20:45PM +0200, Arnd Bergmann wrote:
> On Saturday 23 August 2014, Simon Horman wrote:
> > Please consider these Renesas ARM based SoC cleanup updates for v3.18.
> > 
> > This pull request is based on
> > "Renesas ARM Based SoC DT Timers Updates for v3.18",
> > tagged as dt-timers-for-v3.18,
> > which I have already sent a pull-request for.
> > 
> > This is a rebase of changes that didn't quite make it into v3.17.
> > These cleanups depend on changes in dt-timers-for-v3.18 and rebasing
> > to remove that dependency is not entirely trivial.
> > 
> 
> 
> I hesitated a bit for this one and the dt-timers-for-v3.18 branch, as they
> don't really fit into our scheme, and I'd much prefer having the cleanups
> done first, while everything else isn't that important.

Thanks, we are working on improving our processes to try to
get more cleanups in earlier in the release cycle.

> In the end, I stuck it all into next/soc.
> 
> That's the last one of the outstanding shmobile pull requests that I'm
> aware of. Again, sorry for taking my time with them. Please check that
> I didn't miss anything you wanted me to pull.

Thanks, I have checked and I don't see anything missing.

[GIT PULL] Renesas ARM Based SoC Cleanup Updates for v3.18

[Simon Horman]

On Fri, Sep 05, 2014 at 06:20:45PM +0200, Arnd Bergmann wrote:
> On Saturday 23 August 2014, Simon Horman wrote:
> > Please consider these Renesas ARM based SoC cleanup updates for v3.18.
> > 
> > This pull request is based on
> > "Renesas ARM Based SoC DT Timers Updates for v3.18",
> > tagged as dt-timers-for-v3.18,
> > which I have already sent a pull-request for.
> > 
> > This is a rebase of changes that didn't quite make it into v3.17.
> > These cleanups depend on changes in dt-timers-for-v3.18 and rebasing
> > to remove that dependency is not entirely trivial.
> > 
> 
> 
> I hesitated a bit for this one and the dt-timers-for-v3.18 branch, as they
> don't really fit into our scheme, and I'd much prefer having the cleanups
> done first, while everything else isn't that important.

Thanks, we are working on improving our processes to try to
get more cleanups in earlier in the release cycle.

> In the end, I stuck it all into next/soc.
> 
> That's the last one of the outstanding shmobile pull requests that I'm
> aware of. Again, sorry for taking my time with them. Please check that
> I didn't miss anything you wanted me to pull.

Thanks, I have checked and I don't see anything missing.

[GIT PULL] Renesas ARM Based SoC Cleanup for v3.19

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC cleanup for v3.19.


The following changes since commit f114040e3ea6e07372334ade75d1ee0775c355e1:

  Linux 3.18-rc1 (2014-10-19 18:08:38 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v3.19

for you to fetch changes up to 335204dfb83b3105cf4a666d1ad024917831cbdc:

  ARM: shmobile: Remove FSF address from copyright headers (2014-10-27 09:48:07 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC Cleanup for v3.19

* Remove FSF address from copyright headers

----------------------------------------------------------------
Laurent Pinchart (1):
      ARM: shmobile: Remove FSF address from copyright headers

 arch/arm/mach-shmobile/board-ape6evm-reference.c | 4 ----
 arch/arm/mach-shmobile/board-ape6evm.c           | 4 ----
 arch/arm/mach-shmobile/board-armadillo800eva.c   | 5 -----
 arch/arm/mach-shmobile/board-bockw-reference.c   | 4 ----
 arch/arm/mach-shmobile/board-bockw.c             | 4 ----
 arch/arm/mach-shmobile/board-koelsch-reference.c | 4 ----
 arch/arm/mach-shmobile/board-koelsch.c           | 4 ----
 arch/arm/mach-shmobile/board-kzm9g-reference.c   | 4 ----
 arch/arm/mach-shmobile/board-kzm9g.c             | 4 ----
 arch/arm/mach-shmobile/board-lager-reference.c   | 4 ----
 arch/arm/mach-shmobile/board-lager.c             | 4 ----
 arch/arm/mach-shmobile/board-mackerel.c          | 4 ----
 arch/arm/mach-shmobile/board-marzen-reference.c  | 4 ----
 arch/arm/mach-shmobile/board-marzen.c            | 4 ----
 arch/arm/mach-shmobile/clock-r8a73a4.c           | 4 ----
 arch/arm/mach-shmobile/clock-r8a7740.c           | 4 ----
 arch/arm/mach-shmobile/clock-r8a7778.c           | 4 ----
 arch/arm/mach-shmobile/clock-r8a7779.c           | 4 ----
 arch/arm/mach-shmobile/clock-r8a7790.c           | 4 ----
 arch/arm/mach-shmobile/clock-r8a7791.c           | 4 ----
 arch/arm/mach-shmobile/clock-sh7372.c            | 4 ----
 arch/arm/mach-shmobile/clock-sh73a0.c            | 4 ----
 arch/arm/mach-shmobile/clock.c                   | 4 ----
 arch/arm/mach-shmobile/console.c                 | 4 ----
 arch/arm/mach-shmobile/headsmp-scu.S             | 5 -----
 arch/arm/mach-shmobile/intc-sh7372.c             | 4 ----
 arch/arm/mach-shmobile/intc-sh73a0.c             | 4 ----
 arch/arm/mach-shmobile/r8a7740.h                 | 4 ----
 arch/arm/mach-shmobile/r8a7778.h                 | 4 ----
 arch/arm/mach-shmobile/setup-emev2.c             | 4 ----
 arch/arm/mach-shmobile/setup-r7s72100.c          | 4 ----
 arch/arm/mach-shmobile/setup-r8a73a4.c           | 4 ----
 arch/arm/mach-shmobile/setup-r8a7740.c           | 4 ----
 arch/arm/mach-shmobile/setup-r8a7778.c           | 4 ----
 arch/arm/mach-shmobile/setup-r8a7779.c           | 4 ----
 arch/arm/mach-shmobile/setup-r8a7790.c           | 4 ----
 arch/arm/mach-shmobile/setup-r8a7791.c           | 4 ----
 arch/arm/mach-shmobile/setup-rcar-gen2.c         | 4 ----
 arch/arm/mach-shmobile/setup-sh7372.c            | 4 ----
 arch/arm/mach-shmobile/setup-sh73a0.c            | 4 ----
 arch/arm/mach-shmobile/sleep-sh7372.S            | 5 -----
 arch/arm/mach-shmobile/smp-emev2.c               | 4 ----
 arch/arm/mach-shmobile/smp-r8a7779.c             | 4 ----
 arch/arm/mach-shmobile/smp-sh73a0.c              | 4 ----
 arch/arm/mach-shmobile/timer.c                   | 5 -----
 45 files changed, 184 deletions(-)

[GIT PULL] Renesas ARM Based SoC Cleanup for v3.19

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC cleanup for v3.19.


The following changes since commit f114040e3ea6e07372334ade75d1ee0775c355e1:

  Linux 3.18-rc1 (2014-10-19 18:08:38 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v3.19

for you to fetch changes up to 335204dfb83b3105cf4a666d1ad024917831cbdc:

  ARM: shmobile: Remove FSF address from copyright headers (2014-10-27 09:48:07 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC Cleanup for v3.19

* Remove FSF address from copyright headers

----------------------------------------------------------------
Laurent Pinchart (1):
      ARM: shmobile: Remove FSF address from copyright headers

 arch/arm/mach-shmobile/board-ape6evm-reference.c | 4 ----
 arch/arm/mach-shmobile/board-ape6evm.c           | 4 ----
 arch/arm/mach-shmobile/board-armadillo800eva.c   | 5 -----
 arch/arm/mach-shmobile/board-bockw-reference.c   | 4 ----
 arch/arm/mach-shmobile/board-bockw.c             | 4 ----
 arch/arm/mach-shmobile/board-koelsch-reference.c | 4 ----
 arch/arm/mach-shmobile/board-koelsch.c           | 4 ----
 arch/arm/mach-shmobile/board-kzm9g-reference.c   | 4 ----
 arch/arm/mach-shmobile/board-kzm9g.c             | 4 ----
 arch/arm/mach-shmobile/board-lager-reference.c   | 4 ----
 arch/arm/mach-shmobile/board-lager.c             | 4 ----
 arch/arm/mach-shmobile/board-mackerel.c          | 4 ----
 arch/arm/mach-shmobile/board-marzen-reference.c  | 4 ----
 arch/arm/mach-shmobile/board-marzen.c            | 4 ----
 arch/arm/mach-shmobile/clock-r8a73a4.c           | 4 ----
 arch/arm/mach-shmobile/clock-r8a7740.c           | 4 ----
 arch/arm/mach-shmobile/clock-r8a7778.c           | 4 ----
 arch/arm/mach-shmobile/clock-r8a7779.c           | 4 ----
 arch/arm/mach-shmobile/clock-r8a7790.c           | 4 ----
 arch/arm/mach-shmobile/clock-r8a7791.c           | 4 ----
 arch/arm/mach-shmobile/clock-sh7372.c            | 4 ----
 arch/arm/mach-shmobile/clock-sh73a0.c            | 4 ----
 arch/arm/mach-shmobile/clock.c                   | 4 ----
 arch/arm/mach-shmobile/console.c                 | 4 ----
 arch/arm/mach-shmobile/headsmp-scu.S             | 5 -----
 arch/arm/mach-shmobile/intc-sh7372.c             | 4 ----
 arch/arm/mach-shmobile/intc-sh73a0.c             | 4 ----
 arch/arm/mach-shmobile/r8a7740.h                 | 4 ----
 arch/arm/mach-shmobile/r8a7778.h                 | 4 ----
 arch/arm/mach-shmobile/setup-emev2.c             | 4 ----
 arch/arm/mach-shmobile/setup-r7s72100.c          | 4 ----
 arch/arm/mach-shmobile/setup-r8a73a4.c           | 4 ----
 arch/arm/mach-shmobile/setup-r8a7740.c           | 4 ----
 arch/arm/mach-shmobile/setup-r8a7778.c           | 4 ----
 arch/arm/mach-shmobile/setup-r8a7779.c           | 4 ----
 arch/arm/mach-shmobile/setup-r8a7790.c           | 4 ----
 arch/arm/mach-shmobile/setup-r8a7791.c           | 4 ----
 arch/arm/mach-shmobile/setup-rcar-gen2.c         | 4 ----
 arch/arm/mach-shmobile/setup-sh7372.c            | 4 ----
 arch/arm/mach-shmobile/setup-sh73a0.c            | 4 ----
 arch/arm/mach-shmobile/sleep-sh7372.S            | 5 -----
 arch/arm/mach-shmobile/smp-emev2.c               | 4 ----
 arch/arm/mach-shmobile/smp-r8a7779.c             | 4 ----
 arch/arm/mach-shmobile/smp-sh73a0.c              | 4 ----
 arch/arm/mach-shmobile/timer.c                   | 5 -----
 45 files changed, 184 deletions(-)

[PATCH] ARM: shmobile: Remove FSF address from copyright headers

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The information is already included in the COPYING file in the kernel
sources root directory, we don't want to modify all source files when
the FSF will move to a new address, and I'm tired of seeing the related
checkpatch.pl warnings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-ape6evm-reference.c | 4 ----
 arch/arm/mach-shmobile/board-ape6evm.c           | 4 ----
 arch/arm/mach-shmobile/board-armadillo800eva.c   | 5 -----
 arch/arm/mach-shmobile/board-bockw-reference.c   | 4 ----
 arch/arm/mach-shmobile/board-bockw.c             | 4 ----
 arch/arm/mach-shmobile/board-koelsch-reference.c | 4 ----
 arch/arm/mach-shmobile/board-koelsch.c           | 4 ----
 arch/arm/mach-shmobile/board-kzm9g-reference.c   | 4 ----
 arch/arm/mach-shmobile/board-kzm9g.c             | 4 ----
 arch/arm/mach-shmobile/board-lager-reference.c   | 4 ----
 arch/arm/mach-shmobile/board-lager.c             | 4 ----
 arch/arm/mach-shmobile/board-mackerel.c          | 4 ----
 arch/arm/mach-shmobile/board-marzen-reference.c  | 4 ----
 arch/arm/mach-shmobile/board-marzen.c            | 4 ----
 arch/arm/mach-shmobile/clock-r8a73a4.c           | 4 ----
 arch/arm/mach-shmobile/clock-r8a7740.c           | 4 ----
 arch/arm/mach-shmobile/clock-r8a7778.c           | 4 ----
 arch/arm/mach-shmobile/clock-r8a7779.c           | 4 ----
 arch/arm/mach-shmobile/clock-r8a7790.c           | 4 ----
 arch/arm/mach-shmobile/clock-r8a7791.c           | 4 ----
 arch/arm/mach-shmobile/clock-sh7372.c            | 4 ----
 arch/arm/mach-shmobile/clock-sh73a0.c            | 4 ----
 arch/arm/mach-shmobile/clock.c                   | 4 ----
 arch/arm/mach-shmobile/console.c                 | 4 ----
 arch/arm/mach-shmobile/headsmp-scu.S             | 5 -----
 arch/arm/mach-shmobile/intc-sh7372.c             | 4 ----
 arch/arm/mach-shmobile/intc-sh73a0.c             | 4 ----
 arch/arm/mach-shmobile/r8a7740.h                 | 4 ----
 arch/arm/mach-shmobile/r8a7778.h                 | 4 ----
 arch/arm/mach-shmobile/setup-emev2.c             | 4 ----
 arch/arm/mach-shmobile/setup-r7s72100.c          | 4 ----
 arch/arm/mach-shmobile/setup-r8a73a4.c           | 4 ----
 arch/arm/mach-shmobile/setup-r8a7740.c           | 4 ----
 arch/arm/mach-shmobile/setup-r8a7778.c           | 4 ----
 arch/arm/mach-shmobile/setup-r8a7779.c           | 4 ----
 arch/arm/mach-shmobile/setup-r8a7790.c           | 4 ----
 arch/arm/mach-shmobile/setup-r8a7791.c           | 4 ----
 arch/arm/mach-shmobile/setup-rcar-gen2.c         | 4 ----
 arch/arm/mach-shmobile/setup-sh7372.c            | 4 ----
 arch/arm/mach-shmobile/setup-sh73a0.c            | 4 ----
 arch/arm/mach-shmobile/sleep-sh7372.S            | 5 -----
 arch/arm/mach-shmobile/smp-emev2.c               | 4 ----
 arch/arm/mach-shmobile/smp-r8a7779.c             | 4 ----
 arch/arm/mach-shmobile/smp-sh73a0.c              | 4 ----
 arch/arm/mach-shmobile/timer.c                   | 5 -----
 45 files changed, 184 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c
index a6503d8..004ed92 100644
--- a/arch/arm/mach-shmobile/board-ape6evm-reference.c
+++ b/arch/arm/mach-shmobile/board-ape6evm-reference.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/gpio.h>
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index b222f68..66f6781 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/gpio.h>
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index e709835..0e912af 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -12,11 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 
 #include <linux/clk.h>
diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c
index 79c4784..d649ade 100644
--- a/arch/arm/mach-shmobile/board-bockw-reference.c
+++ b/arch/arm/mach-shmobile/board-bockw-reference.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/of_platform.h>
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
index 1cf2c75..f27b5a8 100644
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ b/arch/arm/mach-shmobile/board-bockw.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/mfd/tmio.h>
diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c
index 46aa540..1da1097 100644
--- a/arch/arm/mach-shmobile/board-koelsch-reference.c
+++ b/arch/arm/mach-shmobile/board-koelsch-reference.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/dma-mapping.h>
diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c
index 7111b5c..3a6a276 100644
--- a/arch/arm/mach-shmobile/board-koelsch.c
+++ b/arch/arm/mach-shmobile/board-koelsch.c
@@ -14,10 +14,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/dma-mapping.h>
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index d9cdf9a..f2ef759 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -14,10 +14,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/delay.h>
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 77e36fa..7c9b63b 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/delay.h>
diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index bc4b483..93f31b7 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/dma-mapping.h>
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index 571327b..b47262a 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/gpio.h>
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index ca5d34b..ed10870 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -16,10 +16,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/delay.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c
index 38d9cdd..f0757bb 100644
--- a/arch/arm/mach-shmobile/board-marzen-reference.c
+++ b/arch/arm/mach-shmobile/board-marzen-reference.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/clk/shmobile.h>
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index ce33d78..994dc7d 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index c2330ea..1cf44dc 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/init.h>
 #include <linux/io.h>
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index 0794f04..969e85d 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index 67980a0..e8510c3 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -17,10 +17,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 /*
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index c51f9db..fa8ab2c 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include <linux/bitops.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 126ddaf..c395ff1 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/init.h>
 #include <linux/io.h>
diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
index 453b231..82143ca 100644
--- a/arch/arm/mach-shmobile/clock-r8a7791.c
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/init.h>
 #include <linux/io.h>
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 7071676..3bc92f4 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 02a6f45..6b4c1f3 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
index 806f940..1f81ad7 100644
--- a/arch/arm/mach-shmobile/clock.c
+++ b/arch/arm/mach-shmobile/clock.c
@@ -14,10 +14,6 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/console.c b/arch/arm/mach-shmobile/console.c
index f2e79f2..e329ccb 100644
--- a/arch/arm/mach-shmobile/console.c
+++ b/arch/arm/mach-shmobile/console.c
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S
index f45dde7..69df8bf 100644
--- a/arch/arm/mach-shmobile/headsmp-scu.S
+++ b/arch/arm/mach-shmobile/headsmp-scu.S
@@ -12,11 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
  */
 
 #include <linux/linkage.h>
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index e2af00b..1ccf49c 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 44457a9..9e36180 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/r8a7740.h b/arch/arm/mach-shmobile/r8a7740.h
index f369b4b..ca7805a 100644
--- a/arch/arm/mach-shmobile/r8a7740.h
+++ b/arch/arm/mach-shmobile/r8a7740.h
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #ifndef __ASM_R8A7740_H__
diff --git a/arch/arm/mach-shmobile/r8a7778.h b/arch/arm/mach-shmobile/r8a7778.h
index f4076a5..9086dfc 100644
--- a/arch/arm/mach-shmobile/r8a7778.h
+++ b/arch/arm/mach-shmobile/r8a7778.h
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #ifndef __ASM_R8A7778_H__
 #define __ASM_R8A7778_H__
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index b06a9e8..aad97be 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
index 4122104..1711747 100644
--- a/arch/arm/mach-shmobile/setup-r7s72100.c
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 53f40b7..b88b88a 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/irq.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 8894e1b..fe15dd2 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 85fe016..8ec784f 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 136078a..d08e75c 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 877fdeb..ec7d97d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/irq.h>
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index 35d7863..d930925f 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/irq.h>
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 42d5b43..a669377 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/clk/shmobile.h>
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index d646c8d..e81c385 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index b7bd8e5..1c8172d 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/sleep-sh7372.S b/arch/arm/mach-shmobile/sleep-sh7372.S
index 9782862..146b8de 100644
--- a/arch/arm/mach-shmobile/sleep-sh7372.S
+++ b/arch/arm/mach-shmobile/sleep-sh7372.S
@@ -22,11 +22,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
  */
 
 #include <linux/linkage.h>
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index 6ff1df1..baff3b5 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 3100e35..3f761f8 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 22d8f87..c16dbfe 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 87c6be1..1081b76 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -12,11 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 #include <linux/platform_device.h>
 #include <linux/clocksource.h>
-- 
2.1.1

[PATCH] ARM: shmobile: Remove FSF address from copyright headers

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The information is already included in the COPYING file in the kernel
sources root directory, we don't want to modify all source files when
the FSF will move to a new address, and I'm tired of seeing the related
checkpatch.pl warnings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-ape6evm-reference.c | 4 ----
 arch/arm/mach-shmobile/board-ape6evm.c           | 4 ----
 arch/arm/mach-shmobile/board-armadillo800eva.c   | 5 -----
 arch/arm/mach-shmobile/board-bockw-reference.c   | 4 ----
 arch/arm/mach-shmobile/board-bockw.c             | 4 ----
 arch/arm/mach-shmobile/board-koelsch-reference.c | 4 ----
 arch/arm/mach-shmobile/board-koelsch.c           | 4 ----
 arch/arm/mach-shmobile/board-kzm9g-reference.c   | 4 ----
 arch/arm/mach-shmobile/board-kzm9g.c             | 4 ----
 arch/arm/mach-shmobile/board-lager-reference.c   | 4 ----
 arch/arm/mach-shmobile/board-lager.c             | 4 ----
 arch/arm/mach-shmobile/board-mackerel.c          | 4 ----
 arch/arm/mach-shmobile/board-marzen-reference.c  | 4 ----
 arch/arm/mach-shmobile/board-marzen.c            | 4 ----
 arch/arm/mach-shmobile/clock-r8a73a4.c           | 4 ----
 arch/arm/mach-shmobile/clock-r8a7740.c           | 4 ----
 arch/arm/mach-shmobile/clock-r8a7778.c           | 4 ----
 arch/arm/mach-shmobile/clock-r8a7779.c           | 4 ----
 arch/arm/mach-shmobile/clock-r8a7790.c           | 4 ----
 arch/arm/mach-shmobile/clock-r8a7791.c           | 4 ----
 arch/arm/mach-shmobile/clock-sh7372.c            | 4 ----
 arch/arm/mach-shmobile/clock-sh73a0.c            | 4 ----
 arch/arm/mach-shmobile/clock.c                   | 4 ----
 arch/arm/mach-shmobile/console.c                 | 4 ----
 arch/arm/mach-shmobile/headsmp-scu.S             | 5 -----
 arch/arm/mach-shmobile/intc-sh7372.c             | 4 ----
 arch/arm/mach-shmobile/intc-sh73a0.c             | 4 ----
 arch/arm/mach-shmobile/r8a7740.h                 | 4 ----
 arch/arm/mach-shmobile/r8a7778.h                 | 4 ----
 arch/arm/mach-shmobile/setup-emev2.c             | 4 ----
 arch/arm/mach-shmobile/setup-r7s72100.c          | 4 ----
 arch/arm/mach-shmobile/setup-r8a73a4.c           | 4 ----
 arch/arm/mach-shmobile/setup-r8a7740.c           | 4 ----
 arch/arm/mach-shmobile/setup-r8a7778.c           | 4 ----
 arch/arm/mach-shmobile/setup-r8a7779.c           | 4 ----
 arch/arm/mach-shmobile/setup-r8a7790.c           | 4 ----
 arch/arm/mach-shmobile/setup-r8a7791.c           | 4 ----
 arch/arm/mach-shmobile/setup-rcar-gen2.c         | 4 ----
 arch/arm/mach-shmobile/setup-sh7372.c            | 4 ----
 arch/arm/mach-shmobile/setup-sh73a0.c            | 4 ----
 arch/arm/mach-shmobile/sleep-sh7372.S            | 5 -----
 arch/arm/mach-shmobile/smp-emev2.c               | 4 ----
 arch/arm/mach-shmobile/smp-r8a7779.c             | 4 ----
 arch/arm/mach-shmobile/smp-sh73a0.c              | 4 ----
 arch/arm/mach-shmobile/timer.c                   | 5 -----
 45 files changed, 184 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c
index a6503d8..004ed92 100644
--- a/arch/arm/mach-shmobile/board-ape6evm-reference.c
+++ b/arch/arm/mach-shmobile/board-ape6evm-reference.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/gpio.h>
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index b222f68..66f6781 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/gpio.h>
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index e709835..0e912af 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -12,11 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 
 #include <linux/clk.h>
diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c
index 79c4784..d649ade 100644
--- a/arch/arm/mach-shmobile/board-bockw-reference.c
+++ b/arch/arm/mach-shmobile/board-bockw-reference.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/of_platform.h>
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
index 1cf2c75..f27b5a8 100644
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ b/arch/arm/mach-shmobile/board-bockw.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/mfd/tmio.h>
diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c
index 46aa540..1da1097 100644
--- a/arch/arm/mach-shmobile/board-koelsch-reference.c
+++ b/arch/arm/mach-shmobile/board-koelsch-reference.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/dma-mapping.h>
diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c
index 7111b5c..3a6a276 100644
--- a/arch/arm/mach-shmobile/board-koelsch.c
+++ b/arch/arm/mach-shmobile/board-koelsch.c
@@ -14,10 +14,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/dma-mapping.h>
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index d9cdf9a..f2ef759 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -14,10 +14,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/delay.h>
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 77e36fa..7c9b63b 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/delay.h>
diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index bc4b483..93f31b7 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/dma-mapping.h>
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index 571327b..b47262a 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/gpio.h>
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index ca5d34b..ed10870 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -16,10 +16,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/delay.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c
index 38d9cdd..f0757bb 100644
--- a/arch/arm/mach-shmobile/board-marzen-reference.c
+++ b/arch/arm/mach-shmobile/board-marzen-reference.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/clk/shmobile.h>
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index ce33d78..994dc7d 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index c2330ea..1cf44dc 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/init.h>
 #include <linux/io.h>
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index 0794f04..969e85d 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index 67980a0..e8510c3 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -17,10 +17,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 /*
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index c51f9db..fa8ab2c 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include <linux/bitops.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 126ddaf..c395ff1 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/init.h>
 #include <linux/io.h>
diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
index 453b231..82143ca 100644
--- a/arch/arm/mach-shmobile/clock-r8a7791.c
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/init.h>
 #include <linux/io.h>
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 7071676..3bc92f4 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 02a6f45..6b4c1f3 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
index 806f940..1f81ad7 100644
--- a/arch/arm/mach-shmobile/clock.c
+++ b/arch/arm/mach-shmobile/clock.c
@@ -14,10 +14,6 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/console.c b/arch/arm/mach-shmobile/console.c
index f2e79f2..e329ccb 100644
--- a/arch/arm/mach-shmobile/console.c
+++ b/arch/arm/mach-shmobile/console.c
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S
index f45dde7..69df8bf 100644
--- a/arch/arm/mach-shmobile/headsmp-scu.S
+++ b/arch/arm/mach-shmobile/headsmp-scu.S
@@ -12,11 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
  */
 
 #include <linux/linkage.h>
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index e2af00b..1ccf49c 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 44457a9..9e36180 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/r8a7740.h b/arch/arm/mach-shmobile/r8a7740.h
index f369b4b..ca7805a 100644
--- a/arch/arm/mach-shmobile/r8a7740.h
+++ b/arch/arm/mach-shmobile/r8a7740.h
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #ifndef __ASM_R8A7740_H__
diff --git a/arch/arm/mach-shmobile/r8a7778.h b/arch/arm/mach-shmobile/r8a7778.h
index f4076a5..9086dfc 100644
--- a/arch/arm/mach-shmobile/r8a7778.h
+++ b/arch/arm/mach-shmobile/r8a7778.h
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #ifndef __ASM_R8A7778_H__
 #define __ASM_R8A7778_H__
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index b06a9e8..aad97be 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
index 4122104..1711747 100644
--- a/arch/arm/mach-shmobile/setup-r7s72100.c
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 53f40b7..b88b88a 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/irq.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 8894e1b..fe15dd2 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 85fe016..8ec784f 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 136078a..d08e75c 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 877fdeb..ec7d97d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/irq.h>
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index 35d7863..d930925f 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/irq.h>
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 42d5b43..a669377 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/clk/shmobile.h>
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index d646c8d..e81c385 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index b7bd8e5..1c8172d 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/sleep-sh7372.S b/arch/arm/mach-shmobile/sleep-sh7372.S
index 9782862..146b8de 100644
--- a/arch/arm/mach-shmobile/sleep-sh7372.S
+++ b/arch/arm/mach-shmobile/sleep-sh7372.S
@@ -22,11 +22,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
  */
 
 #include <linux/linkage.h>
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index 6ff1df1..baff3b5 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 3100e35..3f761f8 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 22d8f87..c16dbfe 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 87c6be1..1081b76 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -12,11 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 #include <linux/platform_device.h>
 #include <linux/clocksource.h>
-- 
2.1.1

Re: [GIT PULL] Renesas ARM Based SoC Cleanup for v3.19

[Olof Johansson]

On Thu, Oct 30, 2014 at 10:50:30AM +0900, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these Renesas ARM based SoC cleanup for v3.19.
> 
> 
> The following changes since commit f114040e3ea6e07372334ade75d1ee0775c355e1:
> 
>   Linux 3.18-rc1 (2014-10-19 18:08:38 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v3.19
> 
> for you to fetch changes up to 335204dfb83b3105cf4a666d1ad024917831cbdc:
> 
>   ARM: shmobile: Remove FSF address from copyright headers (2014-10-27 09:48:07 +0900)
> 
> ----------------------------------------------------------------
> Renesas ARM Based SoC Cleanup for v3.19
> 
> * Remove FSF address from copyright headers

Merged into next/cleanup.


-Olof

[GIT PULL] Renesas ARM Based SoC Cleanup for v3.19

[Olof Johansson]

On Thu, Oct 30, 2014 at 10:50:30AM +0900, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these Renesas ARM based SoC cleanup for v3.19.
> 
> 
> The following changes since commit f114040e3ea6e07372334ade75d1ee0775c355e1:
> 
>   Linux 3.18-rc1 (2014-10-19 18:08:38 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v3.19
> 
> for you to fetch changes up to 335204dfb83b3105cf4a666d1ad024917831cbdc:
> 
>   ARM: shmobile: Remove FSF address from copyright headers (2014-10-27 09:48:07 +0900)
> 
> ----------------------------------------------------------------
> Renesas ARM Based SoC Cleanup for v3.19
> 
> * Remove FSF address from copyright headers

Merged into next/cleanup.


-Olof

[GIT PULL] Renesas ARM Based SoC Cleanup for v4.1

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC cleanup for v4.1.


The following changes since commit c517d838eb7d07bbe9507871fab3931deccff539:

  Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc-cleanup-for-v4.1

for you to fetch changes up to fd9454ab51fa92f43ae5b7a71c42f2ee8417c2a2:

  ARM: shmobile: r8a7779: Remove redundant cpu_disable implementation (2015-02-24 07:12:16 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC Cleanup for v4.1

* Remove redundant cpu_disable implementation from r8a7779 SoC
* Remove mach/{uncompress,clkdev,system}.h

----------------------------------------------------------------
Magnus Damm (3):
      ARM: shmobile: Remove mach/system.h
      ARM: shmobile: Remove mach/clkdev.h
      ARM: shmobile: Remove mach/uncompress.h

Stephen Boyd (1):
      ARM: shmobile: r8a7779: Remove redundant cpu_disable implementation

 arch/arm/Kconfig                                 |  1 -
 arch/arm/Kconfig.debug                           |  3 ++-
 arch/arm/mach-shmobile/clock.c                   | 11 -----------
 arch/arm/mach-shmobile/include/mach/clkdev.h     |  7 -------
 arch/arm/mach-shmobile/include/mach/system.h     | 11 -----------
 arch/arm/mach-shmobile/include/mach/uncompress.h | 19 -------------------
 arch/arm/mach-shmobile/smp-r8a7779.c             |  7 -------
 7 files changed, 2 insertions(+), 57 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/include/mach/clkdev.h
 delete mode 100644 arch/arm/mach-shmobile/include/mach/system.h
 delete mode 100644 arch/arm/mach-shmobile/include/mach/uncompress.h

[GIT PULL] Renesas ARM Based SoC Cleanup for v4.1

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC cleanup for v4.1.


The following changes since commit c517d838eb7d07bbe9507871fab3931deccff539:

  Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc-cleanup-for-v4.1

for you to fetch changes up to fd9454ab51fa92f43ae5b7a71c42f2ee8417c2a2:

  ARM: shmobile: r8a7779: Remove redundant cpu_disable implementation (2015-02-24 07:12:16 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC Cleanup for v4.1

* Remove redundant cpu_disable implementation from r8a7779 SoC
* Remove mach/{uncompress,clkdev,system}.h

----------------------------------------------------------------
Magnus Damm (3):
      ARM: shmobile: Remove mach/system.h
      ARM: shmobile: Remove mach/clkdev.h
      ARM: shmobile: Remove mach/uncompress.h

Stephen Boyd (1):
      ARM: shmobile: r8a7779: Remove redundant cpu_disable implementation

 arch/arm/Kconfig                                 |  1 -
 arch/arm/Kconfig.debug                           |  3 ++-
 arch/arm/mach-shmobile/clock.c                   | 11 -----------
 arch/arm/mach-shmobile/include/mach/clkdev.h     |  7 -------
 arch/arm/mach-shmobile/include/mach/system.h     | 11 -----------
 arch/arm/mach-shmobile/include/mach/uncompress.h | 19 -------------------
 arch/arm/mach-shmobile/smp-r8a7779.c             |  7 -------
 7 files changed, 2 insertions(+), 57 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/include/mach/clkdev.h
 delete mode 100644 arch/arm/mach-shmobile/include/mach/system.h
 delete mode 100644 arch/arm/mach-shmobile/include/mach/uncompress.h

[PATCH 1/4] ARM: shmobile: Remove mach/system.h

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

The file <mach/system.h> is no longer included from anywhere so
clean up the code by removing mach-shmobile/include/mach/system.h

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/system.h | 11 -----------
 1 file changed, 11 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/include/mach/system.h

diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h
deleted file mode 100644
index 540eaff..0000000
--- a/arch/arm/mach-shmobile/include/mach/system.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/system_misc.h>
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	soft_restart(0);
-}
-
-#endif
-- 
2.1.4

[PATCH 1/4] ARM: shmobile: Remove mach/system.h

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

The file <mach/system.h> is no longer included from anywhere so
clean up the code by removing mach-shmobile/include/mach/system.h

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/system.h | 11 -----------
 1 file changed, 11 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/include/mach/system.h

diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h
deleted file mode 100644
index 540eaff..0000000
--- a/arch/arm/mach-shmobile/include/mach/system.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/system_misc.h>
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	soft_restart(0);
-}
-
-#endif
-- 
2.1.4

[PATCH 2/4] ARM: shmobile: Remove mach/clkdev.h

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Move over ARCH_SHMOBILE_LEGACY to use the default legacy ARM
implementations of __clk_get() and __clk_put() in <asm/clkdev.h>
by deselecting HAVE_MACH_CLKDEV. This has the nice side effect
that <mach/clkdev.h> is no longer used and can be removed.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/Kconfig                             |  1 -
 arch/arm/mach-shmobile/clock.c               | 11 -----------
 arch/arm/mach-shmobile/include/mach/clkdev.h |  7 -------
 3 files changed, 19 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/include/mach/clkdev.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9f1f09a..495fb7a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -646,7 +646,6 @@ config ARCH_SHMOBILE_LEGACY
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select HAVE_MACH_CLKDEV
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select MULTI_IRQ_HANDLER
diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
index 34f056f..68c2d06 100644
--- a/arch/arm/mach-shmobile/clock.c
+++ b/arch/arm/mach-shmobile/clock.c
@@ -45,14 +45,3 @@ int __init shmobile_clk_init(void)
 
 	return 0;
 }
-
-int __clk_get(struct clk *clk)
-{
-	return 1;
-}
-EXPORT_SYMBOL(__clk_get);
-
-void __clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(__clk_put);
diff --git a/arch/arm/mach-shmobile/include/mach/clkdev.h b/arch/arm/mach-shmobile/include/mach/clkdev.h
deleted file mode 100644
index 36d0163..0000000
--- a/arch/arm/mach-shmobile/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-int __clk_get(struct clk *clk);
-void __clk_put(struct clk *clk);
-
-#endif /* __ASM_MACH_CLKDEV_H */
-- 
2.1.4

[PATCH 2/4] ARM: shmobile: Remove mach/clkdev.h

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Move over ARCH_SHMOBILE_LEGACY to use the default legacy ARM
implementations of __clk_get() and __clk_put() in <asm/clkdev.h>
by deselecting HAVE_MACH_CLKDEV. This has the nice side effect
that <mach/clkdev.h> is no longer used and can be removed.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/Kconfig                             |  1 -
 arch/arm/mach-shmobile/clock.c               | 11 -----------
 arch/arm/mach-shmobile/include/mach/clkdev.h |  7 -------
 3 files changed, 19 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/include/mach/clkdev.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9f1f09a..495fb7a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -646,7 +646,6 @@ config ARCH_SHMOBILE_LEGACY
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select HAVE_MACH_CLKDEV
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select MULTI_IRQ_HANDLER
diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
index 34f056f..68c2d06 100644
--- a/arch/arm/mach-shmobile/clock.c
+++ b/arch/arm/mach-shmobile/clock.c
@@ -45,14 +45,3 @@ int __init shmobile_clk_init(void)
 
 	return 0;
 }
-
-int __clk_get(struct clk *clk)
-{
-	return 1;
-}
-EXPORT_SYMBOL(__clk_get);
-
-void __clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(__clk_put);
diff --git a/arch/arm/mach-shmobile/include/mach/clkdev.h b/arch/arm/mach-shmobile/include/mach/clkdev.h
deleted file mode 100644
index 36d0163..0000000
--- a/arch/arm/mach-shmobile/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-int __clk_get(struct clk *clk);
-void __clk_put(struct clk *clk);
-
-#endif /* __ASM_MACH_CLKDEV_H */
-- 
2.1.4

[PATCH 3/4] ARM: shmobile: Remove mach/uncompress.h

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Convert ARCH_SHMOBILE_LEGACY to make use of <debug/uncompress.h>
and remove the now unused <mach/uncompress.h>.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/Kconfig.debug                           |  3 ++-
 arch/arm/mach-shmobile/include/mach/uncompress.h | 19 -------------------
 2 files changed, 2 insertions(+), 20 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/include/mach/uncompress.h

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 970de75..1ca8dc7 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1573,7 +1573,8 @@ config DEBUG_UNCOMPRESS
 config UNCOMPRESS_INCLUDE
 	string
 	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
-					PLAT_SAMSUNG || ARCH_EFM32
+					PLAT_SAMSUNG || ARCH_EFM32 || \
+					ARCH_SHMOBILE_LEGACY
 	default "mach/uncompress.h"
 
 config EARLY_PRINTK
diff --git a/arch/arm/mach-shmobile/include/mach/uncompress.h b/arch/arm/mach-shmobile/include/mach/uncompress.h
deleted file mode 100644
index f1aee567..0000000
--- a/arch/arm/mach-shmobile/include/mach/uncompress.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef __ASM_MACH_UNCOMPRESS_H
-#define __ASM_MACH_UNCOMPRESS_H
-
-/*
- * This does not append a newline
- */
-static void putc(int c)
-{
-}
-
-static inline void flush(void)
-{
-}
-
-static void arch_decomp_setup(void)
-{
-}
-
-#endif /* __ASM_MACH_UNCOMPRESS_H */
-- 
2.1.4

[PATCH 3/4] ARM: shmobile: Remove mach/uncompress.h

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Convert ARCH_SHMOBILE_LEGACY to make use of <debug/uncompress.h>
and remove the now unused <mach/uncompress.h>.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/Kconfig.debug                           |  3 ++-
 arch/arm/mach-shmobile/include/mach/uncompress.h | 19 -------------------
 2 files changed, 2 insertions(+), 20 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/include/mach/uncompress.h

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 970de75..1ca8dc7 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1573,7 +1573,8 @@ config DEBUG_UNCOMPRESS
 config UNCOMPRESS_INCLUDE
 	string
 	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
-					PLAT_SAMSUNG || ARCH_EFM32
+					PLAT_SAMSUNG || ARCH_EFM32 || \
+					ARCH_SHMOBILE_LEGACY
 	default "mach/uncompress.h"
 
 config EARLY_PRINTK
diff --git a/arch/arm/mach-shmobile/include/mach/uncompress.h b/arch/arm/mach-shmobile/include/mach/uncompress.h
deleted file mode 100644
index f1aee567..0000000
--- a/arch/arm/mach-shmobile/include/mach/uncompress.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef __ASM_MACH_UNCOMPRESS_H
-#define __ASM_MACH_UNCOMPRESS_H
-
-/*
- * This does not append a newline
- */
-static void putc(int c)
-{
-}
-
-static inline void flush(void)
-{
-}
-
-static void arch_decomp_setup(void)
-{
-}
-
-#endif /* __ASM_MACH_UNCOMPRESS_H */
-- 
2.1.4

[PATCH 4/4] ARM: shmobile: r8a7779: Remove redundant cpu_disable implementation

[Simon Horman]

From: Stephen Boyd <sboyd@codeaurora.org>

By default only the non-boot CPUs can be hotplugged if the
smp_operations structure doesn't have the cpu_disable function
pointer set. r8a7779_cpu_disable() implements the same logic,
only non-boot CPUs can be hotplugged, so it's redundant to
override the default behavior.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/smp-r8a7779.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 9fc280e..01f792f 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -124,19 +124,12 @@ static int r8a7779_cpu_kill(unsigned int cpu)
 
 	return 0;
 }
-
-static int r8a7779_cpu_disable(unsigned int cpu)
-{
-	/* only CPU1->3 have power domains, do not allow hotplug of CPU0 */
-	return cpu = 0 ? -EPERM : 0;
-}
 #endif /* CONFIG_HOTPLUG_CPU */
 
 struct smp_operations r8a7779_smp_ops  __initdata = {
 	.smp_prepare_cpus	= r8a7779_smp_prepare_cpus,
 	.smp_boot_secondary	= r8a7779_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
-	.cpu_disable		= r8a7779_cpu_disable,
 	.cpu_die		= shmobile_smp_scu_cpu_die,
 	.cpu_kill		= r8a7779_cpu_kill,
 #endif
-- 
2.1.4

[PATCH 4/4] ARM: shmobile: r8a7779: Remove redundant cpu_disable implementation

[Simon Horman]

From: Stephen Boyd <sboyd@codeaurora.org>

By default only the non-boot CPUs can be hotplugged if the
smp_operations structure doesn't have the cpu_disable function
pointer set. r8a7779_cpu_disable() implements the same logic,
only non-boot CPUs can be hotplugged, so it's redundant to
override the default behavior.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/smp-r8a7779.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 9fc280e..01f792f 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -124,19 +124,12 @@ static int r8a7779_cpu_kill(unsigned int cpu)
 
 	return 0;
 }
-
-static int r8a7779_cpu_disable(unsigned int cpu)
-{
-	/* only CPU1->3 have power domains, do not allow hotplug of CPU0 */
-	return cpu == 0 ? -EPERM : 0;
-}
 #endif /* CONFIG_HOTPLUG_CPU */
 
 struct smp_operations r8a7779_smp_ops  __initdata = {
 	.smp_prepare_cpus	= r8a7779_smp_prepare_cpus,
 	.smp_boot_secondary	= r8a7779_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
-	.cpu_disable		= r8a7779_cpu_disable,
 	.cpu_die		= shmobile_smp_scu_cpu_die,
 	.cpu_kill		= r8a7779_cpu_kill,
 #endif
-- 
2.1.4

Re: [GIT PULL] Renesas ARM Based SoC Cleanup for v4.1

[Arnd Bergmann]

On Thursday 26 February 2015 15:22:32 Simon Horman wrote:
> ----------------------------------------------------------------
> Renesas ARM Based SoC Cleanup for v4.1
> 
> * Remove redundant cpu_disable implementation from r8a7779 SoC
> * Remove mach/{uncompress,clkdev,system}.h
> 

We have a lot of work for multiplatform this time, with your changes,
at91 and the patches I send over the last week. I've decided to
create a next/multiplatform branch for this, and merge your patches
into that one.

	Arnd

[GIT PULL] Renesas ARM Based SoC Cleanup for v4.1

[Arnd Bergmann]

On Thursday 26 February 2015 15:22:32 Simon Horman wrote:
> ----------------------------------------------------------------
> Renesas ARM Based SoC Cleanup for v4.1
> 
> * Remove redundant cpu_disable implementation from r8a7779 SoC
> * Remove mach/{uncompress,clkdev,system}.h
> 

We have a lot of work for multiplatform this time, with your changes,
at91 and the patches I send over the last week. I've decided to
create a next/multiplatform branch for this, and merge your patches
into that one.

	Arnd

[GIT PULL] Renesas ARM Based SoC Cleanup for v4.3

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC cleanup for v4.3.

Amongst other things it removes almost 7000 lines of code :)


The following changes since commit d770e558e21961ad6cfdf0ff7df0eb5d7d4f0754:

  Linux 4.2-rc1 (2015-07-05 11:01:52 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v4.3

for you to fetch changes up to 20834a406ee20b57c796f9911f06600b71c75788:

  ARM: shmobile: timer: r8a73a4 and r8a7790 are multi-platform only (2015-07-06 09:29:46 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC Cleanup for v4.3

* Remove non-multiplatform code from timer
* Remove CONFIG_ARCH_SHMOBILE_MULTI check in setup-rcar-gen2.c
  as it is always true
* Remove legacy (non-multiplatform) support for both sh73a0/kzm9g and
  r8a7740/armadillo800eva
* Move to_rmobile_pd from header to source file where it is used
* Use BIT() macro instead of open coding in r-mobile PM code
* r8a7779: Remove usage of GENPD_FLAG_PM_CLK flag which has no effect

----------------------------------------------------------------
Geert Uytterhoeven (16):
      ARM: shmobile: R-Mobile: Move to_rmobile_pd from header to source file
      ARM: shmobile: R-Mobile: Use BIT() macro instead of open coding
      ARM: shmobile: r8a7779: Remove GENPD_FLAG_PM_CLK flag
      ARM: shmobile: Remove legacy board code for KZM-A9-GT
      ARM: shmobile: Remove legacy kzm9g_defconfig
      ARM: shmobile: Drop sh73a0-kzm9g.dtb for legacy builds
      ARM: shmobile: Remove legacy SoC code for SH-Mobile AG5
      ARM: shmobile: Remove legacy board code for Armadillo-800 EVA
      ARM: shmobile: Remove legacy armadillo800eva_defconfig
      ARM: shmobile: Drop r8a7740-armadillo800eva.dtb for legacy builds
      ARM: shmobile: Remove legacy SoC code for R-Mobile A1
      ARM: shmobile: Remove unused dma-register.h
      ARM: shmobile: R-Mobile: Remove legacy PM Domain code
      ARM: shmobile: Remove obsolete zboot support
      ARM: shmobile: R-Car Gen2: CONFIG_ARCH_SHMOBILE_MULTI is always set
      ARM: shmobile: timer: r8a73a4 and r8a7790 are multi-platform only

 MAINTAINERS                                        |    2 -
 arch/arm/boot/compressed/Makefile                  |    4 -
 arch/arm/boot/compressed/head-shmobile.S           |   71 -
 arch/arm/boot/dts/Makefile                         |    4 +-
 arch/arm/configs/armadillo800eva_defconfig         |  162 ---
 arch/arm/configs/kzm9g_defconfig                   |  154 ---
 arch/arm/mach-shmobile/Kconfig                     |   33 -
 arch/arm/mach-shmobile/Makefile                    |    8 +-
 arch/arm/mach-shmobile/Makefile.boot               |    2 -
 arch/arm/mach-shmobile/board-armadillo800eva.c     | 1365 --------------------
 arch/arm/mach-shmobile/board-kzm9g.c               |  916 -------------
 arch/arm/mach-shmobile/clock-r8a7740.c             |  675 ----------
 arch/arm/mach-shmobile/clock-sh73a0.c              |  752 -----------
 arch/arm/mach-shmobile/dma-register.h              |   84 --
 arch/arm/mach-shmobile/include/mach/head-kzm9g.txt |  410 ------
 arch/arm/mach-shmobile/include/mach/zboot.h        |   19 -
 arch/arm/mach-shmobile/include/mach/zboot_macros.h |  108 --
 arch/arm/mach-shmobile/intc-sh73a0.c               |  337 -----
 arch/arm/mach-shmobile/pm-r8a7740.c                |  129 --
 arch/arm/mach-shmobile/pm-r8a7779.c                |    1 -
 arch/arm/mach-shmobile/pm-rmobile.c                |   49 +-
 arch/arm/mach-shmobile/pm-rmobile.h                |   30 -
 arch/arm/mach-shmobile/pm-sh73a0.c                 |   32 -
 arch/arm/mach-shmobile/r8a7740.h                   |   58 -
 arch/arm/mach-shmobile/setup-r8a7740.c             |  678 +---------
 arch/arm/mach-shmobile/setup-rcar-gen2.c           |    2 -
 arch/arm/mach-shmobile/setup-sh73a0.c              |  739 +----------
 arch/arm/mach-shmobile/sh73a0.h                    |   83 --
 arch/arm/mach-shmobile/smp-sh73a0.c                |    8 -
 arch/arm/mach-shmobile/timer.c                     |   12 -
 30 files changed, 15 insertions(+), 6912 deletions(-)
 delete mode 100644 arch/arm/boot/compressed/head-shmobile.S
 delete mode 100644 arch/arm/configs/armadillo800eva_defconfig
 delete mode 100644 arch/arm/configs/kzm9g_defconfig
 delete mode 100644 arch/arm/mach-shmobile/board-armadillo800eva.c
 delete mode 100644 arch/arm/mach-shmobile/board-kzm9g.c
 delete mode 100644 arch/arm/mach-shmobile/clock-r8a7740.c
 delete mode 100644 arch/arm/mach-shmobile/clock-sh73a0.c
 delete mode 100644 arch/arm/mach-shmobile/dma-register.h
 delete mode 100644 arch/arm/mach-shmobile/include/mach/head-kzm9g.txt
 delete mode 100644 arch/arm/mach-shmobile/include/mach/zboot.h
 delete mode 100644 arch/arm/mach-shmobile/include/mach/zboot_macros.h
 delete mode 100644 arch/arm/mach-shmobile/intc-sh73a0.c
 delete mode 100644 arch/arm/mach-shmobile/pm-r8a7740.c
 delete mode 100644 arch/arm/mach-shmobile/pm-sh73a0.c
 delete mode 100644 arch/arm/mach-shmobile/r8a7740.h

[GIT PULL] Renesas ARM Based SoC Cleanup for v4.3

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC cleanup for v4.3.

Amongst other things it removes almost 7000 lines of code :)


The following changes since commit d770e558e21961ad6cfdf0ff7df0eb5d7d4f0754:

  Linux 4.2-rc1 (2015-07-05 11:01:52 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v4.3

for you to fetch changes up to 20834a406ee20b57c796f9911f06600b71c75788:

  ARM: shmobile: timer: r8a73a4 and r8a7790 are multi-platform only (2015-07-06 09:29:46 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC Cleanup for v4.3

* Remove non-multiplatform code from timer
* Remove CONFIG_ARCH_SHMOBILE_MULTI check in setup-rcar-gen2.c
  as it is always true
* Remove legacy (non-multiplatform) support for both sh73a0/kzm9g and
  r8a7740/armadillo800eva
* Move to_rmobile_pd from header to source file where it is used
* Use BIT() macro instead of open coding in r-mobile PM code
* r8a7779: Remove usage of GENPD_FLAG_PM_CLK flag which has no effect

----------------------------------------------------------------
Geert Uytterhoeven (16):
      ARM: shmobile: R-Mobile: Move to_rmobile_pd from header to source file
      ARM: shmobile: R-Mobile: Use BIT() macro instead of open coding
      ARM: shmobile: r8a7779: Remove GENPD_FLAG_PM_CLK flag
      ARM: shmobile: Remove legacy board code for KZM-A9-GT
      ARM: shmobile: Remove legacy kzm9g_defconfig
      ARM: shmobile: Drop sh73a0-kzm9g.dtb for legacy builds
      ARM: shmobile: Remove legacy SoC code for SH-Mobile AG5
      ARM: shmobile: Remove legacy board code for Armadillo-800 EVA
      ARM: shmobile: Remove legacy armadillo800eva_defconfig
      ARM: shmobile: Drop r8a7740-armadillo800eva.dtb for legacy builds
      ARM: shmobile: Remove legacy SoC code for R-Mobile A1
      ARM: shmobile: Remove unused dma-register.h
      ARM: shmobile: R-Mobile: Remove legacy PM Domain code
      ARM: shmobile: Remove obsolete zboot support
      ARM: shmobile: R-Car Gen2: CONFIG_ARCH_SHMOBILE_MULTI is always set
      ARM: shmobile: timer: r8a73a4 and r8a7790 are multi-platform only

 MAINTAINERS                                        |    2 -
 arch/arm/boot/compressed/Makefile                  |    4 -
 arch/arm/boot/compressed/head-shmobile.S           |   71 -
 arch/arm/boot/dts/Makefile                         |    4 +-
 arch/arm/configs/armadillo800eva_defconfig         |  162 ---
 arch/arm/configs/kzm9g_defconfig                   |  154 ---
 arch/arm/mach-shmobile/Kconfig                     |   33 -
 arch/arm/mach-shmobile/Makefile                    |    8 +-
 arch/arm/mach-shmobile/Makefile.boot               |    2 -
 arch/arm/mach-shmobile/board-armadillo800eva.c     | 1365 --------------------
 arch/arm/mach-shmobile/board-kzm9g.c               |  916 -------------
 arch/arm/mach-shmobile/clock-r8a7740.c             |  675 ----------
 arch/arm/mach-shmobile/clock-sh73a0.c              |  752 -----------
 arch/arm/mach-shmobile/dma-register.h              |   84 --
 arch/arm/mach-shmobile/include/mach/head-kzm9g.txt |  410 ------
 arch/arm/mach-shmobile/include/mach/zboot.h        |   19 -
 arch/arm/mach-shmobile/include/mach/zboot_macros.h |  108 --
 arch/arm/mach-shmobile/intc-sh73a0.c               |  337 -----
 arch/arm/mach-shmobile/pm-r8a7740.c                |  129 --
 arch/arm/mach-shmobile/pm-r8a7779.c                |    1 -
 arch/arm/mach-shmobile/pm-rmobile.c                |   49 +-
 arch/arm/mach-shmobile/pm-rmobile.h                |   30 -
 arch/arm/mach-shmobile/pm-sh73a0.c                 |   32 -
 arch/arm/mach-shmobile/r8a7740.h                   |   58 -
 arch/arm/mach-shmobile/setup-r8a7740.c             |  678 +---------
 arch/arm/mach-shmobile/setup-rcar-gen2.c           |    2 -
 arch/arm/mach-shmobile/setup-sh73a0.c              |  739 +----------
 arch/arm/mach-shmobile/sh73a0.h                    |   83 --
 arch/arm/mach-shmobile/smp-sh73a0.c                |    8 -
 arch/arm/mach-shmobile/timer.c                     |   12 -
 30 files changed, 15 insertions(+), 6912 deletions(-)
 delete mode 100644 arch/arm/boot/compressed/head-shmobile.S
 delete mode 100644 arch/arm/configs/armadillo800eva_defconfig
 delete mode 100644 arch/arm/configs/kzm9g_defconfig
 delete mode 100644 arch/arm/mach-shmobile/board-armadillo800eva.c
 delete mode 100644 arch/arm/mach-shmobile/board-kzm9g.c
 delete mode 100644 arch/arm/mach-shmobile/clock-r8a7740.c
 delete mode 100644 arch/arm/mach-shmobile/clock-sh73a0.c
 delete mode 100644 arch/arm/mach-shmobile/dma-register.h
 delete mode 100644 arch/arm/mach-shmobile/include/mach/head-kzm9g.txt
 delete mode 100644 arch/arm/mach-shmobile/include/mach/zboot.h
 delete mode 100644 arch/arm/mach-shmobile/include/mach/zboot_macros.h
 delete mode 100644 arch/arm/mach-shmobile/intc-sh73a0.c
 delete mode 100644 arch/arm/mach-shmobile/pm-r8a7740.c
 delete mode 100644 arch/arm/mach-shmobile/pm-sh73a0.c
 delete mode 100644 arch/arm/mach-shmobile/r8a7740.h

[PATCH 01/16] ARM: shmobile: R-Mobile: Move to_rmobile_pd from header to source file

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

to_rmobile_pd() is only used inside pm-rmobile.c

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/pm-rmobile.c | 6 ++++++
 arch/arm/mach-shmobile/pm-rmobile.h | 6 ------
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
index 95018209ff0b..94161c9b1878 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -34,6 +34,12 @@
 #define PSTR_RETRIES	100
 #define PSTR_DELAY_US	10
 
+static inline
+struct rmobile_pm_domain *to_rmobile_pd(struct generic_pm_domain *d)
+{
+	return container_of(d, struct rmobile_pm_domain, genpd);
+}
+
 static int rmobile_pd_power_down(struct generic_pm_domain *genpd)
 {
 	struct rmobile_pm_domain *rmobile_pd = to_rmobile_pd(genpd);
diff --git a/arch/arm/mach-shmobile/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h
index 53219786f539..3992b619c127 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.h
+++ b/arch/arm/mach-shmobile/pm-rmobile.h
@@ -26,12 +26,6 @@ struct rmobile_pm_domain {
 	bool no_debug;
 };
 
-static inline
-struct rmobile_pm_domain *to_rmobile_pd(struct generic_pm_domain *d)
-{
-	return container_of(d, struct rmobile_pm_domain, genpd);
-}
-
 struct pm_domain_device {
 	const char *domain_name;
 	struct platform_device *pdev;
-- 
2.1.4

[PATCH 01/16] ARM: shmobile: R-Mobile: Move to_rmobile_pd from header to source file

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

to_rmobile_pd() is only used inside pm-rmobile.c

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/pm-rmobile.c | 6 ++++++
 arch/arm/mach-shmobile/pm-rmobile.h | 6 ------
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
index 95018209ff0b..94161c9b1878 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -34,6 +34,12 @@
 #define PSTR_RETRIES	100
 #define PSTR_DELAY_US	10
 
+static inline
+struct rmobile_pm_domain *to_rmobile_pd(struct generic_pm_domain *d)
+{
+	return container_of(d, struct rmobile_pm_domain, genpd);
+}
+
 static int rmobile_pd_power_down(struct generic_pm_domain *genpd)
 {
 	struct rmobile_pm_domain *rmobile_pd = to_rmobile_pd(genpd);
diff --git a/arch/arm/mach-shmobile/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h
index 53219786f539..3992b619c127 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.h
+++ b/arch/arm/mach-shmobile/pm-rmobile.h
@@ -26,12 +26,6 @@ struct rmobile_pm_domain {
 	bool no_debug;
 };
 
-static inline
-struct rmobile_pm_domain *to_rmobile_pd(struct generic_pm_domain *d)
-{
-	return container_of(d, struct rmobile_pm_domain, genpd);
-}
-
 struct pm_domain_device {
 	const char *domain_name;
 	struct platform_device *pdev;
-- 
2.1.4

[PATCH 02/16] ARM: shmobile: R-Mobile: Use BIT() macro instead of open coding

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/pm-rmobile.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
index 94161c9b1878..b9b494f5ca99 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -48,7 +48,7 @@ static int rmobile_pd_power_down(struct generic_pm_domain *genpd)
 	if (rmobile_pd->bit_shift = ~0)
 		return -EBUSY;
 
-	mask = 1 << rmobile_pd->bit_shift;
+	mask = BIT(rmobile_pd->bit_shift);
 	if (rmobile_pd->suspend) {
 		int ret = rmobile_pd->suspend();
 
@@ -85,7 +85,7 @@ static int __rmobile_pd_power_up(struct rmobile_pm_domain *rmobile_pd,
 	if (rmobile_pd->bit_shift = ~0)
 		return 0;
 
-	mask = 1 << rmobile_pd->bit_shift;
+	mask = BIT(rmobile_pd->bit_shift);
 	if (__raw_readl(rmobile_pd->base + PSTR) & mask)
 		goto out;
 
-- 
2.1.4

[PATCH 02/16] ARM: shmobile: R-Mobile: Use BIT() macro instead of open coding

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/pm-rmobile.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
index 94161c9b1878..b9b494f5ca99 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -48,7 +48,7 @@ static int rmobile_pd_power_down(struct generic_pm_domain *genpd)
 	if (rmobile_pd->bit_shift == ~0)
 		return -EBUSY;
 
-	mask = 1 << rmobile_pd->bit_shift;
+	mask = BIT(rmobile_pd->bit_shift);
 	if (rmobile_pd->suspend) {
 		int ret = rmobile_pd->suspend();
 
@@ -85,7 +85,7 @@ static int __rmobile_pd_power_up(struct rmobile_pm_domain *rmobile_pd,
 	if (rmobile_pd->bit_shift == ~0)
 		return 0;
 
-	mask = 1 << rmobile_pd->bit_shift;
+	mask = BIT(rmobile_pd->bit_shift);
 	if (__raw_readl(rmobile_pd->base + PSTR) & mask)
 		goto out;
 
-- 
2.1.4

[PATCH 03/16] ARM: shmobile: r8a7779: Remove GENPD_FLAG_PM_CLK flag

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The R-Car SYSC PM Domain only manages power domains for the main CPUs
and for coprocessors. It does not fill in the genpd .{at,de}tach_dev()
callbacks, and no power management clocks are registered for devices.
Hence pm_clk_{suspend,resume}() are no-ops, and setting of the
GENPD_FLAG_PM_CLK flag can be removed.

Originally the clock handling was copied from the R-Mobile PM Domain
code, which does manage a clock domain, in addition to device power
domains.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/pm-r8a7779.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c
index 44a74c4c5a01..d5f258e4d890 100644
--- a/arch/arm/mach-shmobile/pm-r8a7779.c
+++ b/arch/arm/mach-shmobile/pm-r8a7779.c
@@ -83,7 +83,6 @@ static void r8a7779_init_pm_domain(struct r8a7779_pm_domain *r8a7779_pd)
 {
 	struct generic_pm_domain *genpd = &r8a7779_pd->genpd;
 
-	genpd->flags = GENPD_FLAG_PM_CLK;
 	pm_genpd_init(genpd, NULL, false);
 	genpd->dev_ops.active_wakeup = pd_active_wakeup;
 	genpd->power_off = pd_power_down;
-- 
2.1.4

[PATCH 03/16] ARM: shmobile: r8a7779: Remove GENPD_FLAG_PM_CLK flag

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The R-Car SYSC PM Domain only manages power domains for the main CPUs
and for coprocessors. It does not fill in the genpd .{at,de}tach_dev()
callbacks, and no power management clocks are registered for devices.
Hence pm_clk_{suspend,resume}() are no-ops, and setting of the
GENPD_FLAG_PM_CLK flag can be removed.

Originally the clock handling was copied from the R-Mobile PM Domain
code, which does manage a clock domain, in addition to device power
domains.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/pm-r8a7779.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c
index 44a74c4c5a01..d5f258e4d890 100644
--- a/arch/arm/mach-shmobile/pm-r8a7779.c
+++ b/arch/arm/mach-shmobile/pm-r8a7779.c
@@ -83,7 +83,6 @@ static void r8a7779_init_pm_domain(struct r8a7779_pm_domain *r8a7779_pd)
 {
 	struct generic_pm_domain *genpd = &r8a7779_pd->genpd;
 
-	genpd->flags = GENPD_FLAG_PM_CLK;
 	pm_genpd_init(genpd, NULL, false);
 	genpd->dev_ops.active_wakeup = pd_active_wakeup;
 	genpd->power_off = pd_power_down;
-- 
2.1.4

[PATCH 04/16] ARM: shmobile: Remove legacy board code for KZM-A9-GT

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The KZM-A9-GT board is sufficiently supported by DT-based and board-less
SH-Mobile AG5 (sh73a0) multiplatform kernels. Hence remove the legacy
board code to reduce maintenance effort.

Lacking areas are:
  - USB (it does't work in legacy, neither),
  - LCDC (the LCDC is wired to the legacy INTC, which is not planned to
    be supported with DT).
  - DMAC/IPMMU (no DT bindings are planned).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig                     |   8 -
 arch/arm/mach-shmobile/Makefile                    |   1 -
 arch/arm/mach-shmobile/Makefile.boot               |   1 -
 arch/arm/mach-shmobile/board-kzm9g.c               | 916 ---------------------
 arch/arm/mach-shmobile/include/mach/head-kzm9g.txt | 410 ---------
 arch/arm/mach-shmobile/include/mach/zboot.h        |   5 -
 arch/arm/mach-shmobile/intc-sh73a0.c               | 337 --------
 7 files changed, 1678 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/board-kzm9g.c
 delete mode 100644 arch/arm/mach-shmobile/include/mach/head-kzm9g.txt
 delete mode 100644 arch/arm/mach-shmobile/intc-sh73a0.c

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 45006479d461..3cebc4cbb8ca 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -171,14 +171,6 @@ config MACH_MARZEN
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select USE_OF
 
-config MACH_KZM9G
-	bool "KZM-A9-GT board"
-	depends on ARCH_SH73A0
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SND_SOC_AK4642 if SND_SIMPLE_CARD
-	select USE_OF
-
 comment "Renesas ARM SoCs System Configuration"
 
 config CPU_HAS_INTEVT
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 89e463de4479..a4d7f5734e91 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -58,7 +58,6 @@ obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
 obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
-obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o intc-sh73a0.o
 endif
 
 # Framework support
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index e1ef19cef89c..2269b1c3c30b 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -3,7 +3,6 @@ loadaddr-y	: loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
-loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
 loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
 
 __ZRELADDR	:= $(sort $(loadaddr-y))
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
deleted file mode 100644
index 260d8319fd82..000000000000
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ /dev/null
@@ -1,916 +0,0 @@
-/*
- * KZM-A9-GT board support
- *
- * Copyright (C) 2012	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/input.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mfd/as3711.h>
-#include <linux/mfd/tmio.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/usb/renesas_usbhs.h>
-#include <linux/videodev2.h>
-
-#include <sound/sh_fsi.h>
-#include <sound/simple_card.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <video/sh_mobile_lcdc.h>
-
-#include "common.h"
-#include "intc.h"
-#include "irqs.h"
-#include "sh73a0.h"
-
-/*
- * external GPIO
- */
-#define GPIO_PCF8575_BASE	(310)
-#define GPIO_PCF8575_PORT10	(GPIO_PCF8575_BASE + 8)
-#define GPIO_PCF8575_PORT11	(GPIO_PCF8575_BASE + 9)
-#define GPIO_PCF8575_PORT12	(GPIO_PCF8575_BASE + 10)
-#define GPIO_PCF8575_PORT13	(GPIO_PCF8575_BASE + 11)
-#define GPIO_PCF8575_PORT14	(GPIO_PCF8575_BASE + 12)
-#define GPIO_PCF8575_PORT15	(GPIO_PCF8575_BASE + 13)
-#define GPIO_PCF8575_PORT16	(GPIO_PCF8575_BASE + 14)
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-/*
- * FSI-AK4648
- *
- * this command is required when playback.
- *
- * # amixer set "LINEOUT Mixer DACL" on
- */
-
-/* SMSC 9221 */
-static struct resource smsc9221_resources[] = {
-	[0] = {
-		.start	= 0x10000000, /* CS4 */
-		.end	= 0x100000ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= irq_pin(3), /* IRQ3 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct smsc911x_platform_config smsc9221_platdata = {
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device smsc_device = {
-	.name		= "smsc911x",
-	.dev  = {
-		.platform_data = &smsc9221_platdata,
-	},
-	.resource	= smsc9221_resources,
-	.num_resources	= ARRAY_SIZE(smsc9221_resources),
-};
-
-/* USB external chip */
-static struct r8a66597_platdata usb_host_data = {
-	.on_chip	= 0,
-	.xtal		= R8A66597_PLATDATA_XTAL_48MHZ,
-};
-
-static struct resource usb_resources[] = {
-	[0] = {
-		.start	= 0x10010000,
-		.end	= 0x1001ffff - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= irq_pin(1), /* IRQ1 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb_host_device = {
-	.name	= "r8a66597_hcd",
-	.dev = {
-		.platform_data		= &usb_host_data,
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(usb_resources),
-	.resource	= usb_resources,
-};
-
-/* USB Func CN17 */
-struct usbhs_private {
-	void __iomem *phy;
-	void __iomem *cr2;
-	struct renesas_usbhs_platform_info info;
-};
-
-#define IRQ15			irq_pin(15)
-#define USB_PHY_MODE		(1 << 4)
-#define USB_PHY_INT_EN		((1 << 3) | (1 << 2))
-#define USB_PHY_ON		(1 << 1)
-#define USB_PHY_OFF		(1 << 0)
-#define USB_PHY_INT_CLR		(USB_PHY_ON | USB_PHY_OFF)
-
-#define usbhs_get_priv(pdev) \
-	container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info)
-
-static int usbhs_get_vbus(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	return !((1 << 7) & __raw_readw(priv->cr2));
-}
-
-static int usbhs_phy_reset(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	/* init phy */
-	__raw_writew(0x8a0a, priv->cr2);
-
-	return 0;
-}
-
-static int usbhs_get_id(struct platform_device *pdev)
-{
-	return USBHS_GADGET;
-}
-
-static irqreturn_t usbhs_interrupt(int irq, void *data)
-{
-	struct platform_device *pdev = data;
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	renesas_usbhs_call_notify_hotplug(pdev);
-
-	/* clear status */
-	__raw_writew(__raw_readw(priv->phy) | USB_PHY_INT_CLR, priv->phy);
-
-	return IRQ_HANDLED;
-}
-
-static int usbhs_hardware_init(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-	int ret;
-
-	/* clear interrupt status */
-	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);
-
-	ret = request_irq(IRQ15, usbhs_interrupt, IRQF_TRIGGER_HIGH,
-			  dev_name(&pdev->dev), pdev);
-	if (ret) {
-		dev_err(&pdev->dev, "request_irq err\n");
-		return ret;
-	}
-
-	/* enable USB phy interrupt */
-	__raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->phy);
-
-	return 0;
-}
-
-static int usbhs_hardware_exit(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	/* clear interrupt status */
-	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);
-
-	free_irq(IRQ15, pdev);
-
-	return 0;
-}
-
-static u32 usbhs_pipe_cfg[] = {
-	USB_ENDPOINT_XFER_CONTROL,
-	USB_ENDPOINT_XFER_ISOC,
-	USB_ENDPOINT_XFER_ISOC,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_INT,
-	USB_ENDPOINT_XFER_INT,
-	USB_ENDPOINT_XFER_INT,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-};
-
-static struct usbhs_private usbhs_private = {
-	.phy	= IOMEM(0xe60781e0),		/* USBPHYINT */
-	.cr2	= IOMEM(0xe605810c),		/* USBCR2 */
-	.info = {
-		.platform_callback = {
-			.hardware_init	= usbhs_hardware_init,
-			.hardware_exit	= usbhs_hardware_exit,
-			.get_id		= usbhs_get_id,
-			.phy_reset	= usbhs_phy_reset,
-			.get_vbus	= usbhs_get_vbus,
-		},
-		.driver_param = {
-			.buswait_bwait	= 4,
-			.has_otg	= 1,
-			.pipe_type	= usbhs_pipe_cfg,
-			.pipe_size	= ARRAY_SIZE(usbhs_pipe_cfg),
-		},
-	},
-};
-
-static struct resource usbhs_resources[] = {
-	[0] = {
-		.start	= 0xE6890000,
-		.end	= 0xE68900e6 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(62),
-		.end	= gic_spi(62),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usbhs_device = {
-	.name	= "renesas_usbhs",
-	.id	= -1,
-	.dev = {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &usbhs_private.info,
-	},
-	.num_resources	= ARRAY_SIZE(usbhs_resources),
-	.resource	= usbhs_resources,
-};
-
-/* LCDC */
-static struct fb_videomode kzm_lcdc_mode = {
-	.name		= "WVGA Panel",
-	.xres		= 800,
-	.yres		= 480,
-	.left_margin	= 220,
-	.right_margin	= 110,
-	.hsync_len	= 70,
-	.upper_margin	= 20,
-	.lower_margin	= 5,
-	.vsync_len	= 5,
-	.sync		= 0,
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
-	.clock_source = LCDC_CLK_BUS,
-	.ch[0] = {
-		.chan		= LCDC_CHAN_MAINLCD,
-		.fourcc		= V4L2_PIX_FMT_RGB565,
-		.interface_type	= RGB24,
-		.lcd_modes	= &kzm_lcdc_mode,
-		.num_modes	= 1,
-		.clock_divider	= 5,
-		.flags		= 0,
-		.panel_cfg = {
-			.width	= 152,
-			.height	= 91,
-		},
-	}
-};
-
-static struct resource lcdc_resources[] = {
-	[0] = {
-		.name	= "LCDC",
-		.start	= 0xfe940000,
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x580),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc_resources),
-	.resource	= lcdc_resources,
-	.dev	= {
-		.platform_data	= &lcdc_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-/* Fixed 1.8V regulator to be used by MMCIF */
-static struct regulator_consumer_supply fixed1v8_power_consumers[] -{
-	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
-};
-
-/* MMCIF */
-static struct resource sh_mmcif_resources[] = {
-	[0] = {
-		.name	= "MMCIF",
-		.start	= 0xe6bd0000,
-		.end	= 0xe6bd00ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(140),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= gic_spi(141),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_platdata = {
-	.ocr		= MMC_VDD_165_195,
-	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
-	.ccs_unsupported = true,
-	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
-	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct platform_device mmc_device = {
-	.name		= "sh_mmcif",
-	.dev		= {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &sh_mmcif_platdata,
-	},
-	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
-	.resource	= sh_mmcif_resources,
-};
-
-/* Fixed 3.3V regulators to be used by SDHI0 */
-static struct regulator_consumer_supply vcc_sdhi0_consumers[] -{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct regulator_init_data vcc_sdhi0_init_data = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(vcc_sdhi0_consumers),
-	.consumer_supplies      = vcc_sdhi0_consumers,
-};
-
-static struct fixed_voltage_config vcc_sdhi0_info = {
-	.supply_name = "SDHI0 Vcc",
-	.microvolts = 3300000,
-	.gpio = 15,
-	.enable_high = 1,
-	.init_data = &vcc_sdhi0_init_data,
-};
-
-static struct platform_device vcc_sdhi0 = {
-	.name = "reg-fixed-voltage",
-	.id   = 0,
-	.dev  = {
-		.platform_data = &vcc_sdhi0_info,
-	},
-};
-
-/* Fixed 3.3V regulators to be used by SDHI2 */
-static struct regulator_consumer_supply vcc_sdhi2_consumers[] -{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"),
-};
-
-static struct regulator_init_data vcc_sdhi2_init_data = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(vcc_sdhi2_consumers),
-	.consumer_supplies      = vcc_sdhi2_consumers,
-};
-
-static struct fixed_voltage_config vcc_sdhi2_info = {
-	.supply_name = "SDHI2 Vcc",
-	.microvolts = 3300000,
-	.gpio = 14,
-	.enable_high = 1,
-	.init_data = &vcc_sdhi2_init_data,
-};
-
-static struct platform_device vcc_sdhi2 = {
-	.name = "reg-fixed-voltage",
-	.id   = 1,
-	.dev  = {
-		.platform_data = &vcc_sdhi2_info,
-	},
-};
-
-/* SDHI */
-static struct tmio_mmc_data sdhi0_info = {
-	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI0_TX,
-	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI0_RX,
-	.flags		= TMIO_MMC_HAS_IDLE_WAIT,
-	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
-			  MMC_CAP_POWER_OFF_CARD,
-};
-
-static struct resource sdhi0_resources[] = {
-	[0] = {
-		.name	= "SDHI0",
-		.start	= 0xee100000,
-		.end	= 0xee1000ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
-		.start	= gic_spi(83),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= gic_spi(84),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= gic_spi(85),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name		= "sh_mobile_sdhi",
-	.num_resources	= ARRAY_SIZE(sdhi0_resources),
-	.resource	= sdhi0_resources,
-	.dev	= {
-		.platform_data	= &sdhi0_info,
-	},
-};
-
-/* Micro SD */
-static struct tmio_mmc_data sdhi2_info = {
-	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI2_TX,
-	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI2_RX,
-	.flags		= TMIO_MMC_HAS_IDLE_WAIT |
-			  TMIO_MMC_USE_GPIO_CD |
-			  TMIO_MMC_WRPROTECT_DISABLE,
-	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_POWER_OFF_CARD,
-	.cd_gpio	= 13,
-};
-
-static struct resource sdhi2_resources[] = {
-	[0] = {
-		.name	= "SDHI2",
-		.start	= 0xee140000,
-		.end	= 0xee1400ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
-		.start	= gic_spi(103),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= gic_spi(104),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= gic_spi(105),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi2_device = {
-	.name		= "sh_mobile_sdhi",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(sdhi2_resources),
-	.resource	= sdhi2_resources,
-	.dev	= {
-		.platform_data	= &sdhi2_info,
-	},
-};
-
-/* KEY */
-#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
-
-static struct gpio_keys_button gpio_buttons[] = {
-	GPIO_KEY(KEY_BACK,	GPIO_PCF8575_PORT10,	"SW3"),
-	GPIO_KEY(KEY_RIGHT,	GPIO_PCF8575_PORT11,	"SW2-R"),
-	GPIO_KEY(KEY_LEFT,	GPIO_PCF8575_PORT12,	"SW2-L"),
-	GPIO_KEY(KEY_ENTER,	GPIO_PCF8575_PORT13,	"SW2-P"),
-	GPIO_KEY(KEY_UP,	GPIO_PCF8575_PORT14,	"SW2-U"),
-	GPIO_KEY(KEY_DOWN,	GPIO_PCF8575_PORT15,	"SW2-D"),
-	GPIO_KEY(KEY_HOME,	GPIO_PCF8575_PORT16,	"SW1"),
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
-	.buttons	= gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
-	.name	= "gpio-keys",
-	.dev	= {
-		.platform_data  = &gpio_key_info,
-	},
-};
-
-/* FSI-AK4648 */
-static struct sh_fsi_platform_info fsi_info = {
-	.port_a = {
-		.tx_id = SHDMA_SLAVE_FSI2A_TX,
-	},
-};
-
-static struct resource fsi_resources[] = {
-	[0] = {
-		.name	= "FSI",
-		.start	= 0xEC230000,
-		.end	= 0xEC230400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(146),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device fsi_device = {
-	.name		= "sh_fsi2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(fsi_resources),
-	.resource	= fsi_resources,
-	.dev	= {
-		.platform_data	= &fsi_info,
-	},
-};
-
-static struct asoc_simple_card_info fsi2_ak4648_info = {
-	.name		= "AK4648",
-	.card		= "FSI2A-AK4648",
-	.codec		= "ak4642-codec.0-0012",
-	.platform	= "sh_fsi2",
-	.daifmt		= SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
-	.cpu_dai = {
-		.name	= "fsia-dai",
-	},
-	.codec_dai = {
-		.name	= "ak4642-hifi",
-		.sysclk	= 11289600,
-	},
-};
-
-static struct platform_device fsi_ak4648_device = {
-	.name	= "asoc-simple-card",
-	.dev	= {
-		.platform_data	= &fsi2_ak4648_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &fsi_ak4648_device.dev.coherent_dma_mask,
-	},
-};
-
-/* I2C */
-
-/* StepDown1 is used to supply 1.315V to the CPU */
-static struct regulator_init_data as3711_sd1 = {
-	.constraints = {
-		.name = "1.315V CPU",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 1315000,
-		.max_uV = 1335000,
-	},
-};
-
-/* StepDown2 is used to supply 1.8V to the CPU and to the board */
-static struct regulator_init_data as3711_sd2 = {
-	.constraints = {
-		.name = "1.8V",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 1800000,
-		.max_uV = 1800000,
-	},
-};
-
-/*
- * StepDown3 is switched in parallel with StepDown2, seems to be off,
- * according to read-back pre-set register values
- */
-
-/* StepDown4 is used to supply 1.215V to the CPU and to the board */
-static struct regulator_init_data as3711_sd4 = {
-	.constraints = {
-		.name = "1.215V",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 1215000,
-		.max_uV = 1235000,
-	},
-};
-
-/* LDO1 is unused and unconnected */
-
-/* LDO2 is used to supply 2.8V to the CPU */
-static struct regulator_init_data as3711_ldo2 = {
-	.constraints = {
-		.name = "2.8V CPU",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 2800000,
-		.max_uV = 2800000,
-	},
-};
-
-/* LDO3 is used to supply 3.0V to the CPU */
-static struct regulator_init_data as3711_ldo3 = {
-	.constraints = {
-		.name = "3.0V CPU",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 3000000,
-		.max_uV = 3000000,
-	},
-};
-
-/* LDO4 is used to supply 2.8V to the board */
-static struct regulator_init_data as3711_ldo4 = {
-	.constraints = {
-		.name = "2.8V",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 2800000,
-		.max_uV = 2800000,
-	},
-};
-
-/* LDO5 is switched parallel to LDO4, also set to 2.8V */
-static struct regulator_init_data as3711_ldo5 = {
-	.constraints = {
-		.name = "2.8V #2",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 2800000,
-		.max_uV = 2800000,
-	},
-};
-
-/* LDO6 is unused and unconnected */
-
-/* LDO7 is used to supply 1.15V to the CPU */
-static struct regulator_init_data as3711_ldo7 = {
-	.constraints = {
-		.name = "1.15V CPU",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 1150000,
-		.max_uV = 1150000,
-	},
-};
-
-/* LDO8 is switched parallel to LDO7, also set to 1.15V */
-static struct regulator_init_data as3711_ldo8 = {
-	.constraints = {
-		.name = "1.15V CPU #2",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 1150000,
-		.max_uV = 1150000,
-	},
-};
-
-static struct as3711_platform_data as3711_pdata = {
-	.regulator	= {
-		.init_data	= {
-			[AS3711_REGULATOR_SD_1] = &as3711_sd1,
-			[AS3711_REGULATOR_SD_2] = &as3711_sd2,
-			[AS3711_REGULATOR_SD_4] = &as3711_sd4,
-			[AS3711_REGULATOR_LDO_2] = &as3711_ldo2,
-			[AS3711_REGULATOR_LDO_3] = &as3711_ldo3,
-			[AS3711_REGULATOR_LDO_4] = &as3711_ldo4,
-			[AS3711_REGULATOR_LDO_5] = &as3711_ldo5,
-			[AS3711_REGULATOR_LDO_7] = &as3711_ldo7,
-			[AS3711_REGULATOR_LDO_8] = &as3711_ldo8,
-		},
-	},
-	.backlight	= {
-		.su2_fb = "sh_mobile_lcdc_fb.0",
-		.su2_max_uA = 36000,
-		.su2_feedback = AS3711_SU2_CURR_AUTO,
-		.su2_fbprot = AS3711_SU2_GPIO4,
-		.su2_auto_curr1 = true,
-		.su2_auto_curr2 = true,
-		.su2_auto_curr3 = true,
-	},
-};
-
-static struct pcf857x_platform_data pcf8575_pdata = {
-	.gpio_base	= GPIO_PCF8575_BASE,
-};
-
-static struct i2c_board_info i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("ak4648", 0x12),
-	},
-	{
-		I2C_BOARD_INFO("r2025sd", 0x32),
-	},
-	{
-		I2C_BOARD_INFO("ak8975", 0x0c),
-		.irq = irq_pin(28), /* IRQ28 */
-	},
-	{
-		I2C_BOARD_INFO("adxl34x", 0x1d),
-		.irq = irq_pin(26), /* IRQ26 */
-	},
-	{
-		I2C_BOARD_INFO("as3711", 0x40),
-		.irq = intcs_evt2irq(0x3300), /* IRQ24 */
-		.platform_data = &as3711_pdata,
-	},
-};
-
-static struct i2c_board_info i2c1_devices[] = {
-	{
-		I2C_BOARD_INFO("st1232-ts", 0x55),
-		.irq = irq_pin(8), /* IRQ8 */
-	},
-};
-
-static struct i2c_board_info i2c3_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8575", 0x20),
-		.irq = irq_pin(19), /* IRQ19 */
-		.platform_data = &pcf8575_pdata,
-	},
-};
-
-static struct platform_device *kzm_devices[] __initdata = {
-	&smsc_device,
-	&usb_host_device,
-	&usbhs_device,
-	&lcdc_device,
-	&mmc_device,
-	&vcc_sdhi0,
-	&vcc_sdhi2,
-	&sdhi0_device,
-	&sdhi2_device,
-	&gpio_keys_device,
-	&fsi_device,
-	&fsi_ak4648_device,
-};
-
-static unsigned long pin_pullup_conf[] = {
-	PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
-};
-
-static const struct pinctrl_map kzm_pinctrl_map[] = {
-	/* FSIA (AK4648) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
-				  "fsia_mclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
-				  "fsia_sclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
-				  "fsia_data_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
-				  "fsia_data_out", "fsia"),
-	/* I2C3 */
-	PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0",
-				  "i2c3_1", "i2c3"),
-	/* LCD */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh73a0",
-				  "lcd_data24", "lcd"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh73a0",
-				  "lcd_sync", "lcd"),
-	/* MMCIF */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				  "mmc0_data8_0", "mmc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				  "mmc0_ctrl_0", "mmc0"),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				    "PORT279", pin_pullup_conf),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				      "mmc0_data8_0", pin_pullup_conf),
-	/* SCIFA4 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
-				  "scifa4_data", "scifa4"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
-				  "scifa4_ctrl", "scifa4"),
-	/* SDHI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_cd", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_wp", "sdhi0"),
-	/* SDHI2 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh73a0",
-				  "sdhi2_data4", "sdhi2"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh73a0",
-				  "sdhi2_ctrl", "sdhi2"),
-	/* SMSC */
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0",
-				  "bsc_cs4", "bsc"),
-	/* USB */
-	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-sh73a0",
-				  "usb_vbus", "usb"),
-};
-
-static void __init kzm_init(void)
-{
-	regulator_register_always_on(2, "fixed-1.8V", fixed1v8_power_consumers,
-				     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
-	regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map));
-
-	sh73a0_pinmux_init();
-
-	/* SMSC */
-	gpio_request_one(224, GPIOF_IN, NULL); /* IRQ3 */
-
-	/* LCDC */
-	gpio_request_one(222, GPIOF_OUT_INIT_HIGH, NULL); /* LCDCDON */
-	gpio_request_one(226, GPIOF_OUT_INIT_HIGH, NULL); /* SC */
-
-	/* Touchscreen */
-	gpio_request_one(223, GPIOF_IN, NULL); /* IRQ8 */
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Shared attribute override enable, 64K*8way */
-	l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff);
-#endif
-
-	i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
-	i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices));
-	i2c_register_board_info(3, i2c3_devices, ARRAY_SIZE(i2c3_devices));
-
-	sh73a0_add_standard_devices();
-	platform_add_devices(kzm_devices, ARRAY_SIZE(kzm_devices));
-
-	sh73a0_pm_init();
-}
-
-static void kzm9g_restart(enum reboot_mode mode, const char *cmd)
-{
-#define RESCNT2 IOMEM(0xe6188020)
-	/* Do soft power on reset */
-	writel((1 << 31), RESCNT2);
-}
-
-static const char *kzm9g_boards_compat_dt[] __initdata = {
-	"renesas,kzm9g",
-	NULL,
-};
-
-DT_MACHINE_START(KZM9G_DT, "kzm9g")
-	.smp		= smp_ops(sh73a0_smp_ops),
-	.map_io		= sh73a0_map_io,
-	.init_early	= sh73a0_add_early_devices,
-	.init_irq	= sh73a0_init_irq,
-	.init_machine	= kzm_init,
-	.init_late	= shmobile_init_late,
-	.init_time	= sh73a0_earlytimer_init,
-	.restart	= kzm9g_restart,
-	.dt_compat	= kzm9g_boards_compat_dt,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/include/mach/head-kzm9g.txt b/arch/arm/mach-shmobile/include/mach/head-kzm9g.txt
deleted file mode 100644
index 9531f46a822a..000000000000
--- a/arch/arm/mach-shmobile/include/mach/head-kzm9g.txt
+++ /dev/null
@@ -1,410 +0,0 @@
-LIST "KZM9G low-level initialization routine."
-LIST "Adapted from u-boot KZM9G support code."
-
-LIST "Copyright (C) 2013 Ulrich Hecht"
-
-LIST "This program is free software; you can redistribute it and/or modify"
-LIST "it under the terms of the GNU General Public License version 2 as"
-LIST "published by the Free Software Foundation."
-
-LIST "This program is distributed in the hope that it will be useful,"
-LIST "but WITHOUT ANY WARRANTY; without even the implied warranty of"
-LIST "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the"
-LIST "GNU General Public License for more details."
-
-
-LIST "Register definitions:"
-
-LIST "Secure control register"
-#define LIFEC_SEC_SRC (0xE6110008)
-
-LIST "RWDT"
-#define RWDT_BASE   (0xE6020000)
-#define RWTCSRA0 (RWDT_BASE + 0x04)
-
-LIST "HPB Semaphore Control Registers"
-#define HPBSCR_BASE (0xE6000000)
-#define HPBCTRL6 (HPBSCR_BASE + 0x1030)
-
-#define SBSC1_BASE  (0xFE400000)
-#define SDCR0A		(SBSC1_BASE + 0x0008)
-#define SDCR1A		(SBSC1_BASE + 0x000C)
-#define SDPCRA		(SBSC1_BASE + 0x0010)
-#define SDCR0SA		(SBSC1_BASE + 0x0018)
-#define SDCR1SA		(SBSC1_BASE + 0x001C)
-#define RTCSRA		(SBSC1_BASE + 0x0020)
-#define RTCORA		(SBSC1_BASE + 0x0028)
-#define RTCORHA		(SBSC1_BASE + 0x002C)
-#define SDWCRC0A	(SBSC1_BASE + 0x0040)
-#define SDWCRC1A	(SBSC1_BASE + 0x0044)
-#define SDWCR00A	(SBSC1_BASE + 0x0048)
-#define SDWCR01A	(SBSC1_BASE + 0x004C)
-#define SDWCR10A	(SBSC1_BASE + 0x0050)
-#define SDWCR11A	(SBSC1_BASE + 0x0054)
-#define SDWCR2A		(SBSC1_BASE + 0x0060)
-#define SDWCRC2A	(SBSC1_BASE + 0x0064)
-#define ZQCCRA		(SBSC1_BASE + 0x0068)
-#define SDMRACR0A	(SBSC1_BASE + 0x0084)
-#define SDMRTMPCRA	(SBSC1_BASE + 0x008C)
-#define SDMRTMPMSKA	(SBSC1_BASE + 0x0094)
-#define SDGENCNTA	(SBSC1_BASE + 0x009C)
-#define SDDRVCR0A	(SBSC1_BASE + 0x00B4)
-#define DLLCNT0A	(SBSC1_BASE + 0x0354)
-
-#define SDMRA1  (0xFE500000)
-#define SDMRA2  (0xFE5C0000)
-#define SDMRA3  (0xFE504000)
-
-#define SBSC2_BASE  (0xFB400000)
-#define SDCR0B		(SBSC2_BASE + 0x0008)
-#define SDCR1B		(SBSC2_BASE + 0x000C)
-#define SDPCRB		(SBSC2_BASE + 0x0010)
-#define SDCR0SB		(SBSC2_BASE + 0x0018)
-#define SDCR1SB		(SBSC2_BASE + 0x001C)
-#define RTCSRB		(SBSC2_BASE + 0x0020)
-#define RTCORB		(SBSC2_BASE + 0x0028)
-#define RTCORHB		(SBSC2_BASE + 0x002C)
-#define SDWCRC0B	(SBSC2_BASE + 0x0040)
-#define SDWCRC1B	(SBSC2_BASE + 0x0044)
-#define SDWCR00B	(SBSC2_BASE + 0x0048)
-#define SDWCR01B	(SBSC2_BASE + 0x004C)
-#define SDWCR10B	(SBSC2_BASE + 0x0050)
-#define SDWCR11B	(SBSC2_BASE + 0x0054)
-#define SDPDCR0B	(SBSC2_BASE + 0x0058)
-#define SDWCR2B		(SBSC2_BASE + 0x0060)
-#define SDWCRC2B	(SBSC2_BASE + 0x0064)
-#define ZQCCRB		(SBSC2_BASE + 0x0068)
-#define SDMRACR0B	(SBSC2_BASE + 0x0084)
-#define SDMRTMPCRB	(SBSC2_BASE + 0x008C)
-#define SDMRTMPMSKB	(SBSC2_BASE + 0x0094)
-#define SDGENCNTB	(SBSC2_BASE + 0x009C)
-#define DPHYCNT0B	(SBSC2_BASE + 0x00A0)
-#define DPHYCNT1B	(SBSC2_BASE + 0x00A4)
-#define DPHYCNT2B	(SBSC2_BASE + 0x00A8)
-#define SDDRVCR0B	(SBSC2_BASE + 0x00B4)
-#define DLLCNT0B	(SBSC2_BASE + 0x0354)
-
-#define SDMRB1  (0xFB500000)
-#define SDMRB2  (0xFB5C0000)
-#define SDMRB3  (0xFB504000)
-
-#define CPG_BASE   (0xE6150000)
-#define FRQCRA		(CPG_BASE + 0x0000)
-#define FRQCRB		(CPG_BASE + 0x0004)
-#define FRQCRD		(CPG_BASE + 0x00E4)
-#define VCLKCR1		(CPG_BASE + 0x0008)
-#define VCLKCR2		(CPG_BASE + 0x000C)
-#define VCLKCR3		(CPG_BASE + 0x001C)
-#define ZBCKCR		(CPG_BASE + 0x0010)
-#define FLCKCR		(CPG_BASE + 0x0014)
-#define SD0CKCR		(CPG_BASE + 0x0074)
-#define SD1CKCR		(CPG_BASE + 0x0078)
-#define SD2CKCR		(CPG_BASE + 0x007C)
-#define FSIACKCR	(CPG_BASE + 0x0018)
-#define SUBCKCR		(CPG_BASE + 0x0080)
-#define SPUACKCR	(CPG_BASE + 0x0084)
-#define SPUVCKCR	(CPG_BASE + 0x0094)
-#define MSUCKCR		(CPG_BASE + 0x0088)
-#define HSICKCR		(CPG_BASE + 0x008C)
-#define FSIBCKCR	(CPG_BASE + 0x0090)
-#define MFCK1CR		(CPG_BASE + 0x0098)
-#define MFCK2CR		(CPG_BASE + 0x009C)
-#define DSITCKCR	(CPG_BASE + 0x0060)
-#define DSI0PCKCR	(CPG_BASE + 0x0064)
-#define DSI1PCKCR	(CPG_BASE + 0x0068)
-#define DSI0PHYCR	(CPG_BASE + 0x006C)
-#define DVFSCR3		(CPG_BASE + 0x0174)
-#define DVFSCR4		(CPG_BASE + 0x0178)
-#define DVFSCR5		(CPG_BASE + 0x017C)
-#define MPMODE		(CPG_BASE + 0x00CC)
-
-#define PLLECR		(CPG_BASE + 0x00D0)
-#define PLL0CR		(CPG_BASE + 0x00D8)
-#define PLL1CR		(CPG_BASE + 0x0028)
-#define PLL2CR		(CPG_BASE + 0x002C)
-#define PLL3CR		(CPG_BASE + 0x00DC)
-#define PLL0STPCR	(CPG_BASE + 0x00F0)
-#define PLL1STPCR	(CPG_BASE + 0x00C8)
-#define PLL2STPCR	(CPG_BASE + 0x00F8)
-#define PLL3STPCR	(CPG_BASE + 0x00FC)
-#define RMSTPCR0	(CPG_BASE + 0x0110)
-#define RMSTPCR1	(CPG_BASE + 0x0114)
-#define RMSTPCR2	(CPG_BASE + 0x0118)
-#define RMSTPCR3	(CPG_BASE + 0x011C)
-#define RMSTPCR4	(CPG_BASE + 0x0120)
-#define RMSTPCR5	(CPG_BASE + 0x0124)
-#define SMSTPCR0	(CPG_BASE + 0x0130)
-#define SMSTPCR2	(CPG_BASE + 0x0138)
-#define SMSTPCR3	(CPG_BASE + 0x013C)
-#define CPGXXCR4	(CPG_BASE + 0x0150)
-#define SRCR0		(CPG_BASE + 0x80A0)
-#define SRCR2		(CPG_BASE + 0x80B0)
-#define SRCR3		(CPG_BASE + 0x80A8)
-#define VREFCR		(CPG_BASE + 0x00EC)
-#define PCLKCR		(CPG_BASE + 0x1020)
-
-#define PORT32CR (0xE6051020)
-#define PORT33CR (0xE6051021)
-#define PORT34CR (0xE6051022)
-#define PORT35CR (0xE6051023)
-
-LIST "DRAM initialization code:"
-
-EW RWTCSRA0, 0xA507
-
-ED_AND LIFEC_SEC_SRC, 0xFFFF7FFF
-
-ED_AND SMSTPCR3,0xFFFF7FFF
-ED_AND SRCR3, 0xFFFF7FFF
-ED_AND SMSTPCR2,0xFFFBFFFF
-ED_AND SRCR2, 0xFFFBFFFF
-ED PLLECR, 0x00000000
-
-WAIT_MASK PLLECR, 0x00000F00, 0x00000000
-WAIT_MASK FRQCRB, 0x80000000, 0x00000000
-
-ED PLL0CR, 0x2D000000
-ED PLL1CR, 0x17100000
-ED FRQCRB, 0x96235880
-WAIT_MASK FRQCRB, 0x80000000, 0x00000000
-
-ED FLCKCR, 0x0000000B
-ED_AND SMSTPCR0, 0xFFFFFFFD
-
-ED_AND SRCR0, 0xFFFFFFFD
-ED 0xE6001628, 0x514
-ED 0xE6001648, 0x514
-ED 0xE6001658, 0x514
-ED 0xE6001678, 0x514
-
-ED DVFSCR4, 0x00092000
-ED DVFSCR5, 0x000000DC
-ED PLLECR, 0x00000000
-WAIT_MASK PLLECR, 0x00000F00, 0x00000000
-
-ED FRQCRA, 0x0012453C
-ED FRQCRB, 0x80431350
-WAIT_MASK FRQCRB, 0x80000000, 0x00000000
-ED FRQCRD, 0x00000B0B
-WAIT_MASK FRQCRD, 0x80000000, 0x00000000
-
-ED PCLKCR, 0x00000003
-ED VCLKCR1, 0x0000012F
-ED VCLKCR2, 0x00000119
-ED VCLKCR3, 0x00000119
-ED ZBCKCR, 0x00000002
-ED FLCKCR, 0x00000005
-ED SD0CKCR, 0x00000080
-ED SD1CKCR, 0x00000080
-ED SD2CKCR, 0x00000080
-ED FSIACKCR, 0x0000003F
-ED FSIBCKCR, 0x0000003F
-ED SUBCKCR, 0x00000080
-ED SPUACKCR, 0x0000000B
-ED SPUVCKCR, 0x0000000B
-ED MSUCKCR, 0x0000013F
-ED HSICKCR, 0x00000080
-ED MFCK1CR, 0x0000003F
-ED MFCK2CR, 0x0000003F
-ED DSITCKCR, 0x00000107
-ED DSI0PCKCR, 0x00000313
-ED DSI1PCKCR, 0x0000130D
-ED DSI0PHYCR, 0x2A800E0E
-ED PLL0CR, 0x1E000000
-ED PLL0CR, 0x2D000000
-ED PLL1CR, 0x17100000
-ED PLL2CR, 0x27000080
-ED PLL3CR, 0x1D000000
-ED PLL0STPCR, 0x00080000
-ED PLL1STPCR, 0x000120C0
-ED PLL2STPCR, 0x00012000
-ED PLL3STPCR, 0x00000030
-ED PLLECR, 0x0000000B
-WAIT_MASK PLLECR, 0x00000B00, 0x00000B00
-
-ED DVFSCR3, 0x000120F0
-ED MPMODE, 0x00000020
-ED VREFCR, 0x0000028A
-ED RMSTPCR0, 0xE4628087
-ED RMSTPCR1, 0xFFFFFFFF
-ED RMSTPCR2, 0x53FFFFFF
-ED RMSTPCR3, 0xFFFFFFFF
-ED RMSTPCR4, 0x00800D3D
-ED RMSTPCR5, 0xFFFFF3FF
-ED SMSTPCR2, 0x00000000
-ED SRCR2,  0x00040000
-ED_AND PLLECR, 0xFFFFFFF7
-WAIT_MASK PLLECR, 0x00000800, 0x00000000
-
-LIST "set SBSC operational"
-ED HPBCTRL6, 0x00000001
-WAIT_MASK HPBCTRL6, 0x00000001, 0x00000001
-
-LIST "set SBSC operating frequency"
-ED FRQCRD, 0x00001414
-WAIT_MASK FRQCRD, 0x80000000, 0x00000000
-ED PLL3CR, 0x1D000000
-ED_OR PLLECR, 0x00000008
-WAIT_MASK PLLECR, 0x00000800, 0x00000800
-
-LIST "enable DLL oscillation in DDRPHY"
-ED_OR DLLCNT0A, 0x00000002
-
-LIST "wait >= 100 ns"
-ED SDGENCNTA, 0x00000005
-WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
-
-LIST "target LPDDR2 device settings"
-ED SDCR0A, 0xACC90159
-ED SDCR1A, 0x00010059
-ED SDWCRC0A, 0x50874114
-ED SDWCRC1A, 0x33199B37
-ED SDWCRC2A, 0x008F2313
-ED SDWCR00A, 0x31020707
-ED SDWCR01A, 0x0017040A
-ED SDWCR10A, 0x31020707
-ED SDWCR11A, 0x0017040A
-
-ED SDDRVCR0A, 0x055557ff
-
-ED SDWCR2A, 0x30000000
-
-LIST "drive CKE high"
-ED_OR SDPCRA, 0x00000080
-WAIT_MASK SDPCRA, 0x00000080, 0x00000080
-
-LIST "wait >= 200 us"
-ED SDGENCNTA, 0x00002710
-WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
-
-LIST "issue reset command to LPDDR2 device"
-ED SDMRACR0A, 0x0000003F
-ED SDMRA1, 0x00000000
-
-LIST "wait >= 10 (or 1) us (docs inconsistent)"
-ED SDGENCNTA, 0x000001F4
-WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
-
-LIST "MRW ZS initialization calibration command"
-ED SDMRACR0A, 0x0000FF0A
-ED SDMRA3, 0x00000000
-
-LIST "wait >= 1 us"
-ED SDGENCNTA, 0x00000032
-WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
-
-LIST "specify operating mode in LPDDR2"
-ED SDMRACR0A, 0x00002201
-ED SDMRA1, 0x00000000
-ED SDMRACR0A, 0x00000402
-ED SDMRA1, 0x00000000
-ED SDMRACR0A, 0x00000203
-ED SDMRA1, 0x00000000
-
-LIST "initialize DDR interface"
-ED SDMRA2, 0x00000000
-
-LIST "temperature sensor control"
-ED SDMRTMPCRA, 0x88800004
-ED SDMRTMPMSKA,0x00000004
-
-LIST "auto-refreshing control"
-ED RTCORA, 0xA55A0032
-ED RTCORHA, 0xA55A000C
-ED RTCSRA, 0xA55A2048
-
-ED_OR SDCR0A, 0x00000800
-ED_OR SDCR1A, 0x00000400
-
-LIST "auto ZQ calibration control"
-ED ZQCCRA, 0xFFF20000
-
-ED_OR DLLCNT0B, 0x00000002
-ED SDGENCNTB, 0x00000005
-WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
-
-ED SDCR0B, 0xACC90159
-ED SDCR1B, 0x00010059
-ED SDWCRC0B, 0x50874114
-ED SDWCRC1B, 0x33199B37
-ED SDWCRC2B, 0x008F2313
-ED SDWCR00B, 0x31020707
-ED SDWCR01B, 0x0017040A
-ED SDWCR10B, 0x31020707
-ED SDWCR11B, 0x0017040A
-ED SDDRVCR0B, 0x055557ff
-ED SDWCR2B, 0x30000000
-ED_OR SDPCRB, 0x00000080
-WAIT_MASK SDPCRB, 0x00000080, 0x00000080
-
-ED SDGENCNTB, 0x00002710
-WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
-ED SDMRACR0B, 0x0000003F
-
-LIST "upstream u-boot writes to SDMRA1A for both SBSC 1 and 2, which does"
-LIST "not seem to make a lot of sense..."
-ED SDMRB1, 0x00000000
-
-ED SDGENCNTB, 0x000001F4
-WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
-
-ED SDMRACR0B, 0x0000FF0A
-ED SDMRB3, 0x00000000
-ED SDGENCNTB, 0x00000032
-WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
-
-ED SDMRACR0B, 0x00002201
-ED SDMRB1, 0x00000000
-ED SDMRACR0B, 0x00000402
-ED SDMRB1, 0x00000000
-ED SDMRACR0B, 0x00000203
-ED SDMRB1, 0x00000000
-ED SDMRB2, 0x00000000
-ED SDMRTMPCRB, 0x88800004
-ED SDMRTMPMSKB, 0x00000004
-ED RTCORB,  0xA55A0032
-ED RTCORHB, 0xA55A000C
-ED RTCSRB,  0xA55A2048
-ED_OR SDCR0B, 0x00000800
-ED_OR SDCR1B, 0x00000400
-ED ZQCCRB, 0xFFF20000
-ED_OR SDPDCR0B, 0x00030000
-ED DPHYCNT1B, 0xA5390000
-ED DPHYCNT0B, 0x00001200
-ED DPHYCNT1B, 0x07CE0000
-ED DPHYCNT0B, 0x00001247
-WAIT_MASK DPHYCNT2B, 0xFFFFFFFF, 0x07CE0000
-
-ED_AND SDPDCR0B, 0xFFFCFFFF
-
-ED FRQCRD, 0x00000B0B
-WAIT_MASK FRQCRD, 0x80000000, 0x00000000
-
-ED CPGXXCR4, 0xfffffffc
-
-LIST "Setup SCIF4 / workaround"
-EB PORT32CR, 0x12
-EB PORT33CR, 0x22
-EB PORT34CR, 0x12
-EB PORT35CR, 0x22
-
-EW 0xE6C80000, 0
-EB 0xE6C80004, 0x19
-EW 0xE6C80008, 0x0030
-EW 0xE6C80018, 0
-EW 0xE6C80030, 0x0014
-
-LIST "Magic to avoid hangs and corruption on DRAM writes."
-
-LIST "It has been observed that the system would most often hang while"
-LIST "decompressing the kernel, and if it didn't it would always write"
-LIST "a corrupt image to DRAM."
-LIST "This problem does not occur in u-boot, and the reason is that"
-LIST "u-boot performs an additional cache invalidation after setting up"
-LIST "the DRAM controller. Such an invalidation should not be necessary at"
-LIST "this point, and attempts at removing parts of the routine to arrive"
-LIST "at the minimal snippet of code necessary to avoid the DRAM stability"
-LIST "problem yielded the following:"
-
-MRC p15, 0, r0, c1, c0, 0
-MCR p15, 0, r0, c1, c0, 0
diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h
index 175ee05465da..80f599f4b5ab 100644
--- a/arch/arm/mach-shmobile/include/mach/zboot.h
+++ b/arch/arm/mach-shmobile/include/mach/zboot.h
@@ -9,11 +9,6 @@
  *
  **************************************************/
 
-#ifdef CONFIG_MACH_KZM9G
-#define MEMORY_START	0x43000000
-#include "mach/head-kzm9g.txt"
-#else
 #error "unsupported board."
-#endif
 
 #endif /* ZBOOT_H */
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
deleted file mode 100644
index fd63ae6532fc..000000000000
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ /dev/null
@@ -1,337 +0,0 @@
-/*
- * sh73a0 processor support - INTC hardware block
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/arm-gic.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "intc.h"
-#include "irqs.h"
-#include "sh73a0.h"
-
-enum {
-	UNUSED = 0,
-
-	/* interrupt sources INTCS */
-	PINTCS_PINT1, PINTCS_PINT2,
-	RTDMAC_0_DEI0, RTDMAC_0_DEI1, RTDMAC_0_DEI2, RTDMAC_0_DEI3,
-	CEU, MFI, BBIF2, VPU, TSIF1, _3DG_SGX543, _2DDMAC_2DDM0,
-	RTDMAC_1_DEI4, RTDMAC_1_DEI5, RTDMAC_1_DADERR,
-	KEYSC_KEY, VINT, MSIOF,
-	TMU0_TUNI00, TMU0_TUNI01, TMU0_TUNI02,
-	CMT0, TSIF0, CMT2, LMB, MSUG, MSU_MSU, MSU_MSU2,
-	CTI, RWDT0, ICB, PEP, ASA, JPU_JPEG, LCDC, LCRC,
-	RTDMAC_2_DEI6, RTDMAC_2_DEI7, RTDMAC_2_DEI8, RTDMAC_2_DEI9,
-	RTDMAC_3_DEI10, RTDMAC_3_DEI11,
-	FRC, GCU, LCDC1, CSIRX,
-	DSITX0_DSITX00, DSITX0_DSITX01,
-	SPU2_SPU0, SPU2_SPU1, FSI,
-	TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12,
-	TSIF2, CMT4, MFIS2, CPORTS2R, TSG, DMASCH1, SCUW,
-	VIO60, VIO61, CEU21, CSI21, DSITX1_DSITX10, DSITX1_DSITX11,
-	DISP, DSRV, EMUX2_EMUX20I, EMUX2_EMUX21I,
-	MSTIF0_MST00I, MSTIF0_MST01I, MSTIF1_MST10I, MSTIF1_MST11I,
-	SPUV,
-
-	/* interrupt groups INTCS */
-	RTDMAC_0, RTDMAC_1, RTDMAC_2, RTDMAC_3,
-	DSITX0, SPU2, TMU1, MSU,
-};
-
-static struct intc_vect intcs_vectors[] = {
-	INTCS_VECT(PINTCS_PINT1, 0x0600), INTCS_VECT(PINTCS_PINT2, 0x0620),
-	INTCS_VECT(RTDMAC_0_DEI0, 0x0800), INTCS_VECT(RTDMAC_0_DEI1, 0x0820),
-	INTCS_VECT(RTDMAC_0_DEI2, 0x0840), INTCS_VECT(RTDMAC_0_DEI3, 0x0860),
-	INTCS_VECT(CEU, 0x0880), INTCS_VECT(MFI, 0x0900),
-	INTCS_VECT(BBIF2, 0x0960), INTCS_VECT(VPU, 0x0980),
-	INTCS_VECT(TSIF1, 0x09a0), INTCS_VECT(_3DG_SGX543, 0x09e0),
-	INTCS_VECT(_2DDMAC_2DDM0, 0x0a00),
-	INTCS_VECT(RTDMAC_1_DEI4, 0x0b80), INTCS_VECT(RTDMAC_1_DEI5, 0x0ba0),
-	INTCS_VECT(RTDMAC_1_DADERR, 0x0bc0),
-	INTCS_VECT(KEYSC_KEY, 0x0be0), INTCS_VECT(VINT, 0x0c80),
-	INTCS_VECT(MSIOF, 0x0d20),
-	INTCS_VECT(TMU0_TUNI00, 0x0e80), INTCS_VECT(TMU0_TUNI01, 0x0ea0),
-	INTCS_VECT(TMU0_TUNI02, 0x0ec0),
-	INTCS_VECT(CMT0, 0x0f00), INTCS_VECT(TSIF0, 0x0f20),
-	INTCS_VECT(CMT2, 0x0f40), INTCS_VECT(LMB, 0x0f60),
-	INTCS_VECT(MSUG, 0x0f80),
-	INTCS_VECT(MSU_MSU, 0x0fa0), INTCS_VECT(MSU_MSU2, 0x0fc0),
-	INTCS_VECT(CTI, 0x0400), INTCS_VECT(RWDT0, 0x0440),
-	INTCS_VECT(ICB, 0x0480), INTCS_VECT(PEP, 0x04a0),
-	INTCS_VECT(ASA, 0x04c0), INTCS_VECT(JPU_JPEG, 0x0560),
-	INTCS_VECT(LCDC, 0x0580), INTCS_VECT(LCRC, 0x05a0),
-	INTCS_VECT(RTDMAC_2_DEI6, 0x1300), INTCS_VECT(RTDMAC_2_DEI7, 0x1320),
-	INTCS_VECT(RTDMAC_2_DEI8, 0x1340), INTCS_VECT(RTDMAC_2_DEI9, 0x1360),
-	INTCS_VECT(RTDMAC_3_DEI10, 0x1380), INTCS_VECT(RTDMAC_3_DEI11, 0x13a0),
-	INTCS_VECT(FRC, 0x1700), INTCS_VECT(GCU, 0x1760),
-	INTCS_VECT(LCDC1, 0x1780), INTCS_VECT(CSIRX, 0x17a0),
-	INTCS_VECT(DSITX0_DSITX00, 0x17c0), INTCS_VECT(DSITX0_DSITX01, 0x17e0),
-	INTCS_VECT(SPU2_SPU0, 0x1800), INTCS_VECT(SPU2_SPU1, 0x1820),
-	INTCS_VECT(FSI, 0x1840),
-	INTCS_VECT(TMU1_TUNI10, 0x1900), INTCS_VECT(TMU1_TUNI11, 0x1920),
-	INTCS_VECT(TMU1_TUNI12, 0x1940),
-	INTCS_VECT(TSIF2, 0x1960), INTCS_VECT(CMT4, 0x1980),
-	INTCS_VECT(MFIS2, 0x1a00), INTCS_VECT(CPORTS2R, 0x1a20),
-	INTCS_VECT(TSG, 0x1ae0), INTCS_VECT(DMASCH1, 0x1b00),
-	INTCS_VECT(SCUW, 0x1b40),
-	INTCS_VECT(VIO60, 0x1b60), INTCS_VECT(VIO61, 0x1b80),
-	INTCS_VECT(CEU21, 0x1ba0), INTCS_VECT(CSI21, 0x1be0),
-	INTCS_VECT(DSITX1_DSITX10, 0x1c00), INTCS_VECT(DSITX1_DSITX11, 0x1c20),
-	INTCS_VECT(DISP, 0x1c40), INTCS_VECT(DSRV, 0x1c60),
-	INTCS_VECT(EMUX2_EMUX20I, 0x1c80), INTCS_VECT(EMUX2_EMUX21I, 0x1ca0),
-	INTCS_VECT(MSTIF0_MST00I, 0x1cc0), INTCS_VECT(MSTIF0_MST01I, 0x1ce0),
-	INTCS_VECT(MSTIF1_MST10I, 0x1d00), INTCS_VECT(MSTIF1_MST11I, 0x1d20),
-	INTCS_VECT(SPUV, 0x2300),
-};
-
-static struct intc_group intcs_groups[] __initdata = {
-	INTC_GROUP(RTDMAC_0, RTDMAC_0_DEI0, RTDMAC_0_DEI1,
-		   RTDMAC_0_DEI2, RTDMAC_0_DEI3),
-	INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI4, RTDMAC_1_DEI5, RTDMAC_1_DADERR),
-	INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI6, RTDMAC_2_DEI7,
-		   RTDMAC_2_DEI8, RTDMAC_2_DEI9),
-	INTC_GROUP(RTDMAC_3, RTDMAC_3_DEI10, RTDMAC_3_DEI11),
-	INTC_GROUP(TMU1, TMU1_TUNI12, TMU1_TUNI11, TMU1_TUNI10),
-	INTC_GROUP(DSITX0, DSITX0_DSITX00, DSITX0_DSITX01),
-	INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1),
-	INTC_GROUP(MSU, MSU_MSU, MSU_MSU2),
-};
-
-static struct intc_mask_reg intcs_mask_registers[] = {
-	{ 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */
-	  { 0, 0, 0, CEU,
-	    0, 0, 0, 0 } },
-	{ 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */
-	  { 0, 0, 0, VPU,
-	    BBIF2, 0, 0, MFI } },
-	{ 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */
-	  { 0, 0, 0, _2DDMAC_2DDM0,
-	    0, ASA, PEP, ICB } },
-	{ 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */
-	  { 0, 0, 0, CTI,
-	    JPU_JPEG, 0, LCRC, LCDC } },
-	{ 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */
-	  { KEYSC_KEY, RTDMAC_1_DADERR, RTDMAC_1_DEI5, RTDMAC_1_DEI4,
-	    RTDMAC_0_DEI3, RTDMAC_0_DEI2, RTDMAC_0_DEI1, RTDMAC_0_DEI0 } },
-	{ 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */
-	  { 0, 0, MSIOF, 0,
-	    _3DG_SGX543, 0, 0, 0 } },
-	{ 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */
-	  { 0, TMU0_TUNI02, TMU0_TUNI01, TMU0_TUNI00,
-	    0, 0, 0, 0 } },
-	{ 0xffd201a0, 0xffd201e0, 8, /* IMR8SA / IMCR8SA */
-	  { 0, 0, 0, 0,
-	    0, MSU_MSU, MSU_MSU2, MSUG } },
-	{ 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */
-	  { 0, RWDT0, CMT2, CMT0,
-	    0, 0, 0, 0 } },
-	{ 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */
-	  { 0, 0, 0, 0,
-	    0, TSIF1, LMB, TSIF0 } },
-	{ 0xffd201b0, 0xffd201f0, 8, /* IMR12SA / IMCR12SA */
-	  { 0, 0, 0, 0,
-	    0, 0, PINTCS_PINT2, PINTCS_PINT1 } },
-	{ 0xffd50180, 0xffd501c0, 8, /* IMR0SA3 / IMCR0SA3 */
-	  { RTDMAC_2_DEI6, RTDMAC_2_DEI7, RTDMAC_2_DEI8, RTDMAC_2_DEI9,
-	    RTDMAC_3_DEI10, RTDMAC_3_DEI11, 0, 0 } },
-	{ 0xffd50190, 0xffd501d0, 8, /* IMR4SA3 / IMCR4SA3 */
-	  { FRC, 0, 0, GCU,
-	    LCDC1, CSIRX, DSITX0_DSITX00, DSITX0_DSITX01 } },
-	{ 0xffd50194, 0xffd501d4, 8, /* IMR5SA3 / IMCR5SA3 */
-	  { SPU2_SPU0, SPU2_SPU1, FSI, 0,
-	    0, 0, 0, 0 } },
-	{ 0xffd50198, 0xffd501d8, 8, /* IMR6SA3 / IMCR6SA3 */
-	  { TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12, 0,
-	    TSIF2, CMT4, 0, 0 } },
-	{ 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */
-	  { MFIS2, CPORTS2R, 0, 0,
-	    0, 0, 0, TSG } },
-	{ 0xffd501a0, 0xffd501e0, 8, /* IMR8SA3 / IMCR8SA3 */
-	  { DMASCH1, 0, SCUW, VIO60,
-	    VIO61, CEU21, 0, CSI21 } },
-	{ 0xffd501a4, 0xffd501e4, 8, /* IMR9SA3 / IMCR9SA3 */
-	  { DSITX1_DSITX10, DSITX1_DSITX11, DISP, DSRV,
-	    EMUX2_EMUX20I, EMUX2_EMUX21I, MSTIF0_MST00I, MSTIF0_MST01I } },
-	{ 0xffd501a8, 0xffd501e8, 8, /* IMR10SA3 / IMCR10SA3 */
-	  { MSTIF0_MST00I, MSTIF0_MST01I, 0, 0,
-	    0, 0, 0, 0  } },
-	{ 0xffd60180, 0xffd601c0, 8, /* IMR0SA4 / IMCR0SA4 */
-	  { SPUV, 0, 0, 0,
-	    0, 0, 0, 0  } },
-};
-
-/* Priority is needed for INTCA to receive the INTCS interrupt */
-static struct intc_prio_reg intcs_prio_registers[] = {
-	{ 0xffd20000, 0, 16, 4, /* IPRAS */ { CTI, 0, _2DDMAC_2DDM0, ICB } },
-	{ 0xffd20004, 0, 16, 4, /* IPRBS */ { JPU_JPEG, LCDC, 0, LCRC } },
-	{ 0xffd20008, 0, 16, 4, /* IPRCS */ { BBIF2, 0, 0, 0 } },
-	{ 0xffd2000c, 0, 16, 4, /* IPRDS */ { PINTCS_PINT1, PINTCS_PINT2,
-					      0, 0 } },
-	{ 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_0, CEU, MFI, VPU } },
-	{ 0xffd20014, 0, 16, 4, /* IPRFS */ { KEYSC_KEY, RTDMAC_1,
-					      CMT2, CMT0 } },
-	{ 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU0_TUNI00, TMU0_TUNI01,
-					      TMU0_TUNI02, TSIF1 } },
-	{ 0xffd2001c, 0, 16, 4, /* IPRHS */ { VINT, 0, 0, 0 } },
-	{ 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, 0 } },
-	{ 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, _3DG_SGX543, MSUG, MSU } },
-	{ 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, ASA, LMB, PEP } },
-	{ 0xffd20030, 0, 16, 4, /* IPRMS */ { 0, 0, 0, RWDT0 } },
-	{ 0xffd50000, 0, 16, 4, /* IPRAS3 */ { RTDMAC_2, 0, 0, 0 } },
-	{ 0xffd50004, 0, 16, 4, /* IPRBS3 */ { RTDMAC_3, 0, 0, 0 } },
-	{ 0xffd50020, 0, 16, 4, /* IPRIS3 */ { FRC, 0, 0, 0 } },
-	{ 0xffd50024, 0, 16, 4, /* IPRJS3 */ { LCDC1, CSIRX, DSITX0, 0 } },
-	{ 0xffd50028, 0, 16, 4, /* IPRKS3 */ { SPU2, 0, FSI, 0 } },
-	{ 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, TSIF2 } },
-	{ 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, 0, 0, 0 } },
-	{ 0xffd50038, 0, 16, 4, /* IPROS3 */ { MFIS2, CPORTS2R, 0, 0 } },
-	{ 0xffd50040, 0, 16, 4, /* IPRQS3 */ { DMASCH1, 0, SCUW, VIO60 } },
-	{ 0xffd50044, 0, 16, 4, /* IPRRS3 */ { VIO61, CEU21, 0, CSI21 } },
-	{ 0xffd50048, 0, 16, 4, /* IPRSS3 */ { DSITX1_DSITX10, DSITX1_DSITX11,
-					       DISP, DSRV } },
-	{ 0xffd5004c, 0, 16, 4, /* IPRTS3 */ { EMUX2_EMUX20I, EMUX2_EMUX21I,
-					       MSTIF0_MST00I, MSTIF0_MST01I } },
-	{ 0xffd50050, 0, 16, 4, /* IPRUS3 */ { MSTIF1_MST10I, MSTIF1_MST11I,
-					       0, 0 } },
-	{ 0xffd60000, 0, 16, 4, /* IPRAS4 */ { SPUV, 0, 0, 0 } },
-};
-
-static struct resource intcs_resources[] __initdata = {
-	[0] = {
-		.start	= 0xffd20000,
-		.end	= 0xffd201ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0xffd50000,
-		.end	= 0xffd501ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 0xffd60000,
-		.end	= 0xffd601ff,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct intc_desc intcs_desc __initdata = {
-	.name = "sh73a0-intcs",
-	.resource = intcs_resources,
-	.num_resources = ARRAY_SIZE(intcs_resources),
-	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
-			   intcs_prio_registers, NULL, NULL),
-};
-
-static struct irqaction sh73a0_intcs_cascade;
-
-static irqreturn_t sh73a0_intcs_demux(int irq, void *dev_id)
-{
-	unsigned int evtcodeas = ioread32((void __iomem *)dev_id);
-
-	generic_handle_irq(intcs_evt2irq(evtcodeas));
-
-	return IRQ_HANDLED;
-}
-
-#define PINTER0_PHYS 0xe69000a0
-#define PINTER1_PHYS 0xe69000a4
-#define PINTER0_VIRT IOMEM(0xe69000a0)
-#define PINTER1_VIRT IOMEM(0xe69000a4)
-#define PINTRR0 IOMEM(0xe69000d0)
-#define PINTRR1 IOMEM(0xe69000d4)
-
-#define PINT0A_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq))
-#define PINT0B_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 8))
-#define PINT0C_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 16))
-#define PINT0D_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 24))
-#define PINT1E_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT1_IRQ(irq))
-
-INTC_PINT(intc_pint0, PINTER0_PHYS, 0xe69000b0, "sh73a0-pint0",		\
-  INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D),	\
-  INTC_PINT_V(A, PINT0A_IRQ), INTC_PINT_V(B, PINT0B_IRQ),		\
-  INTC_PINT_V(C, PINT0C_IRQ), INTC_PINT_V(D, PINT0D_IRQ),		\
-  INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D),	\
-  INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D));
-
-INTC_PINT(intc_pint1, PINTER1_PHYS, 0xe69000c0, "sh73a0-pint1",		\
-  INTC_PINT_E(E), INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, \
-  INTC_PINT_V(E, PINT1E_IRQ), INTC_PINT_V_NONE,				\
-  INTC_PINT_V_NONE, INTC_PINT_V_NONE,					\
-  INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E(E), \
-  INTC_PINT_E(E), INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E_NONE);
-
-static struct irqaction sh73a0_pint0_cascade;
-static struct irqaction sh73a0_pint1_cascade;
-
-static void pint_demux(void __iomem *rr, void __iomem *er, int base_irq)
-{
-	unsigned long value =  ioread32(rr) & ioread32(er);
-	int k;
-
-	for (k = 0; k < 32; k++) {
-		if (value & (1 << (31 - k))) {
-			generic_handle_irq(base_irq + k);
-			iowrite32(~(1 << (31 - k)), rr);
-		}
-	}
-}
-
-static irqreturn_t sh73a0_pint0_demux(int irq, void *dev_id)
-{
-	pint_demux(PINTRR0, PINTER0_VIRT, SH73A0_PINT0_IRQ(0));
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t sh73a0_pint1_demux(int irq, void *dev_id)
-{
-	pint_demux(PINTRR1, PINTER1_VIRT, SH73A0_PINT1_IRQ(0));
-	return IRQ_HANDLED;
-}
-
-void __init sh73a0_init_irq(void)
-{
-	void __iomem *gic_dist_base = IOMEM(0xf0001000);
-	void __iomem *gic_cpu_base = IOMEM(0xf0000100);
-	void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
-
-	gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE);
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-
-	register_intc_controller(&intcs_desc);
-	register_intc_controller(&intc_pint0_desc);
-	register_intc_controller(&intc_pint1_desc);
-
-	/* demux using INTEVTSA */
-	sh73a0_intcs_cascade.name = "INTCS cascade";
-	sh73a0_intcs_cascade.handler = sh73a0_intcs_demux;
-	sh73a0_intcs_cascade.dev_id = intevtsa;
-	setup_irq(gic_spi(50), &sh73a0_intcs_cascade);
-
-	/* PINT pins are sanely tied to the GIC as SPI */
-	sh73a0_pint0_cascade.name = "PINT0 cascade";
-	sh73a0_pint0_cascade.handler = sh73a0_pint0_demux;
-	setup_irq(gic_spi(33), &sh73a0_pint0_cascade);
-
-	sh73a0_pint1_cascade.name = "PINT1 cascade";
-	sh73a0_pint1_cascade.handler = sh73a0_pint1_demux;
-	setup_irq(gic_spi(34), &sh73a0_pint1_cascade);
-}
-- 
2.1.4

[PATCH 04/16] ARM: shmobile: Remove legacy board code for KZM-A9-GT

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The KZM-A9-GT board is sufficiently supported by DT-based and board-less
SH-Mobile AG5 (sh73a0) multiplatform kernels. Hence remove the legacy
board code to reduce maintenance effort.

Lacking areas are:
  - USB (it does't work in legacy, neither),
  - LCDC (the LCDC is wired to the legacy INTC, which is not planned to
    be supported with DT).
  - DMAC/IPMMU (no DT bindings are planned).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig                     |   8 -
 arch/arm/mach-shmobile/Makefile                    |   1 -
 arch/arm/mach-shmobile/Makefile.boot               |   1 -
 arch/arm/mach-shmobile/board-kzm9g.c               | 916 ---------------------
 arch/arm/mach-shmobile/include/mach/head-kzm9g.txt | 410 ---------
 arch/arm/mach-shmobile/include/mach/zboot.h        |   5 -
 arch/arm/mach-shmobile/intc-sh73a0.c               | 337 --------
 7 files changed, 1678 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/board-kzm9g.c
 delete mode 100644 arch/arm/mach-shmobile/include/mach/head-kzm9g.txt
 delete mode 100644 arch/arm/mach-shmobile/intc-sh73a0.c

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 45006479d461..3cebc4cbb8ca 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -171,14 +171,6 @@ config MACH_MARZEN
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select USE_OF
 
-config MACH_KZM9G
-	bool "KZM-A9-GT board"
-	depends on ARCH_SH73A0
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SND_SOC_AK4642 if SND_SIMPLE_CARD
-	select USE_OF
-
 comment "Renesas ARM SoCs System Configuration"
 
 config CPU_HAS_INTEVT
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 89e463de4479..a4d7f5734e91 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -58,7 +58,6 @@ obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
 obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
-obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o intc-sh73a0.o
 endif
 
 # Framework support
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index e1ef19cef89c..2269b1c3c30b 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -3,7 +3,6 @@ loadaddr-y	:=
 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
-loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
 loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
 
 __ZRELADDR	:= $(sort $(loadaddr-y))
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
deleted file mode 100644
index 260d8319fd82..000000000000
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ /dev/null
@@ -1,916 +0,0 @@
-/*
- * KZM-A9-GT board support
- *
- * Copyright (C) 2012	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/input.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mfd/as3711.h>
-#include <linux/mfd/tmio.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/usb/renesas_usbhs.h>
-#include <linux/videodev2.h>
-
-#include <sound/sh_fsi.h>
-#include <sound/simple_card.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <video/sh_mobile_lcdc.h>
-
-#include "common.h"
-#include "intc.h"
-#include "irqs.h"
-#include "sh73a0.h"
-
-/*
- * external GPIO
- */
-#define GPIO_PCF8575_BASE	(310)
-#define GPIO_PCF8575_PORT10	(GPIO_PCF8575_BASE + 8)
-#define GPIO_PCF8575_PORT11	(GPIO_PCF8575_BASE + 9)
-#define GPIO_PCF8575_PORT12	(GPIO_PCF8575_BASE + 10)
-#define GPIO_PCF8575_PORT13	(GPIO_PCF8575_BASE + 11)
-#define GPIO_PCF8575_PORT14	(GPIO_PCF8575_BASE + 12)
-#define GPIO_PCF8575_PORT15	(GPIO_PCF8575_BASE + 13)
-#define GPIO_PCF8575_PORT16	(GPIO_PCF8575_BASE + 14)
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-/*
- * FSI-AK4648
- *
- * this command is required when playback.
- *
- * # amixer set "LINEOUT Mixer DACL" on
- */
-
-/* SMSC 9221 */
-static struct resource smsc9221_resources[] = {
-	[0] = {
-		.start	= 0x10000000, /* CS4 */
-		.end	= 0x100000ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= irq_pin(3), /* IRQ3 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct smsc911x_platform_config smsc9221_platdata = {
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device smsc_device = {
-	.name		= "smsc911x",
-	.dev  = {
-		.platform_data = &smsc9221_platdata,
-	},
-	.resource	= smsc9221_resources,
-	.num_resources	= ARRAY_SIZE(smsc9221_resources),
-};
-
-/* USB external chip */
-static struct r8a66597_platdata usb_host_data = {
-	.on_chip	= 0,
-	.xtal		= R8A66597_PLATDATA_XTAL_48MHZ,
-};
-
-static struct resource usb_resources[] = {
-	[0] = {
-		.start	= 0x10010000,
-		.end	= 0x1001ffff - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= irq_pin(1), /* IRQ1 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb_host_device = {
-	.name	= "r8a66597_hcd",
-	.dev = {
-		.platform_data		= &usb_host_data,
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(usb_resources),
-	.resource	= usb_resources,
-};
-
-/* USB Func CN17 */
-struct usbhs_private {
-	void __iomem *phy;
-	void __iomem *cr2;
-	struct renesas_usbhs_platform_info info;
-};
-
-#define IRQ15			irq_pin(15)
-#define USB_PHY_MODE		(1 << 4)
-#define USB_PHY_INT_EN		((1 << 3) | (1 << 2))
-#define USB_PHY_ON		(1 << 1)
-#define USB_PHY_OFF		(1 << 0)
-#define USB_PHY_INT_CLR		(USB_PHY_ON | USB_PHY_OFF)
-
-#define usbhs_get_priv(pdev) \
-	container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info)
-
-static int usbhs_get_vbus(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	return !((1 << 7) & __raw_readw(priv->cr2));
-}
-
-static int usbhs_phy_reset(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	/* init phy */
-	__raw_writew(0x8a0a, priv->cr2);
-
-	return 0;
-}
-
-static int usbhs_get_id(struct platform_device *pdev)
-{
-	return USBHS_GADGET;
-}
-
-static irqreturn_t usbhs_interrupt(int irq, void *data)
-{
-	struct platform_device *pdev = data;
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	renesas_usbhs_call_notify_hotplug(pdev);
-
-	/* clear status */
-	__raw_writew(__raw_readw(priv->phy) | USB_PHY_INT_CLR, priv->phy);
-
-	return IRQ_HANDLED;
-}
-
-static int usbhs_hardware_init(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-	int ret;
-
-	/* clear interrupt status */
-	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);
-
-	ret = request_irq(IRQ15, usbhs_interrupt, IRQF_TRIGGER_HIGH,
-			  dev_name(&pdev->dev), pdev);
-	if (ret) {
-		dev_err(&pdev->dev, "request_irq err\n");
-		return ret;
-	}
-
-	/* enable USB phy interrupt */
-	__raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->phy);
-
-	return 0;
-}
-
-static int usbhs_hardware_exit(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	/* clear interrupt status */
-	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);
-
-	free_irq(IRQ15, pdev);
-
-	return 0;
-}
-
-static u32 usbhs_pipe_cfg[] = {
-	USB_ENDPOINT_XFER_CONTROL,
-	USB_ENDPOINT_XFER_ISOC,
-	USB_ENDPOINT_XFER_ISOC,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_INT,
-	USB_ENDPOINT_XFER_INT,
-	USB_ENDPOINT_XFER_INT,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-};
-
-static struct usbhs_private usbhs_private = {
-	.phy	= IOMEM(0xe60781e0),		/* USBPHYINT */
-	.cr2	= IOMEM(0xe605810c),		/* USBCR2 */
-	.info = {
-		.platform_callback = {
-			.hardware_init	= usbhs_hardware_init,
-			.hardware_exit	= usbhs_hardware_exit,
-			.get_id		= usbhs_get_id,
-			.phy_reset	= usbhs_phy_reset,
-			.get_vbus	= usbhs_get_vbus,
-		},
-		.driver_param = {
-			.buswait_bwait	= 4,
-			.has_otg	= 1,
-			.pipe_type	= usbhs_pipe_cfg,
-			.pipe_size	= ARRAY_SIZE(usbhs_pipe_cfg),
-		},
-	},
-};
-
-static struct resource usbhs_resources[] = {
-	[0] = {
-		.start	= 0xE6890000,
-		.end	= 0xE68900e6 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(62),
-		.end	= gic_spi(62),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usbhs_device = {
-	.name	= "renesas_usbhs",
-	.id	= -1,
-	.dev = {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &usbhs_private.info,
-	},
-	.num_resources	= ARRAY_SIZE(usbhs_resources),
-	.resource	= usbhs_resources,
-};
-
-/* LCDC */
-static struct fb_videomode kzm_lcdc_mode = {
-	.name		= "WVGA Panel",
-	.xres		= 800,
-	.yres		= 480,
-	.left_margin	= 220,
-	.right_margin	= 110,
-	.hsync_len	= 70,
-	.upper_margin	= 20,
-	.lower_margin	= 5,
-	.vsync_len	= 5,
-	.sync		= 0,
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
-	.clock_source = LCDC_CLK_BUS,
-	.ch[0] = {
-		.chan		= LCDC_CHAN_MAINLCD,
-		.fourcc		= V4L2_PIX_FMT_RGB565,
-		.interface_type	= RGB24,
-		.lcd_modes	= &kzm_lcdc_mode,
-		.num_modes	= 1,
-		.clock_divider	= 5,
-		.flags		= 0,
-		.panel_cfg = {
-			.width	= 152,
-			.height	= 91,
-		},
-	}
-};
-
-static struct resource lcdc_resources[] = {
-	[0] = {
-		.name	= "LCDC",
-		.start	= 0xfe940000,
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x580),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc_resources),
-	.resource	= lcdc_resources,
-	.dev	= {
-		.platform_data	= &lcdc_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-/* Fixed 1.8V regulator to be used by MMCIF */
-static struct regulator_consumer_supply fixed1v8_power_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
-};
-
-/* MMCIF */
-static struct resource sh_mmcif_resources[] = {
-	[0] = {
-		.name	= "MMCIF",
-		.start	= 0xe6bd0000,
-		.end	= 0xe6bd00ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(140),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= gic_spi(141),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_platdata = {
-	.ocr		= MMC_VDD_165_195,
-	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
-	.ccs_unsupported = true,
-	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
-	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct platform_device mmc_device = {
-	.name		= "sh_mmcif",
-	.dev		= {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &sh_mmcif_platdata,
-	},
-	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
-	.resource	= sh_mmcif_resources,
-};
-
-/* Fixed 3.3V regulators to be used by SDHI0 */
-static struct regulator_consumer_supply vcc_sdhi0_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct regulator_init_data vcc_sdhi0_init_data = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(vcc_sdhi0_consumers),
-	.consumer_supplies      = vcc_sdhi0_consumers,
-};
-
-static struct fixed_voltage_config vcc_sdhi0_info = {
-	.supply_name = "SDHI0 Vcc",
-	.microvolts = 3300000,
-	.gpio = 15,
-	.enable_high = 1,
-	.init_data = &vcc_sdhi0_init_data,
-};
-
-static struct platform_device vcc_sdhi0 = {
-	.name = "reg-fixed-voltage",
-	.id   = 0,
-	.dev  = {
-		.platform_data = &vcc_sdhi0_info,
-	},
-};
-
-/* Fixed 3.3V regulators to be used by SDHI2 */
-static struct regulator_consumer_supply vcc_sdhi2_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"),
-};
-
-static struct regulator_init_data vcc_sdhi2_init_data = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(vcc_sdhi2_consumers),
-	.consumer_supplies      = vcc_sdhi2_consumers,
-};
-
-static struct fixed_voltage_config vcc_sdhi2_info = {
-	.supply_name = "SDHI2 Vcc",
-	.microvolts = 3300000,
-	.gpio = 14,
-	.enable_high = 1,
-	.init_data = &vcc_sdhi2_init_data,
-};
-
-static struct platform_device vcc_sdhi2 = {
-	.name = "reg-fixed-voltage",
-	.id   = 1,
-	.dev  = {
-		.platform_data = &vcc_sdhi2_info,
-	},
-};
-
-/* SDHI */
-static struct tmio_mmc_data sdhi0_info = {
-	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI0_TX,
-	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI0_RX,
-	.flags		= TMIO_MMC_HAS_IDLE_WAIT,
-	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
-			  MMC_CAP_POWER_OFF_CARD,
-};
-
-static struct resource sdhi0_resources[] = {
-	[0] = {
-		.name	= "SDHI0",
-		.start	= 0xee100000,
-		.end	= 0xee1000ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
-		.start	= gic_spi(83),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= gic_spi(84),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= gic_spi(85),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name		= "sh_mobile_sdhi",
-	.num_resources	= ARRAY_SIZE(sdhi0_resources),
-	.resource	= sdhi0_resources,
-	.dev	= {
-		.platform_data	= &sdhi0_info,
-	},
-};
-
-/* Micro SD */
-static struct tmio_mmc_data sdhi2_info = {
-	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI2_TX,
-	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI2_RX,
-	.flags		= TMIO_MMC_HAS_IDLE_WAIT |
-			  TMIO_MMC_USE_GPIO_CD |
-			  TMIO_MMC_WRPROTECT_DISABLE,
-	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_POWER_OFF_CARD,
-	.cd_gpio	= 13,
-};
-
-static struct resource sdhi2_resources[] = {
-	[0] = {
-		.name	= "SDHI2",
-		.start	= 0xee140000,
-		.end	= 0xee1400ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
-		.start	= gic_spi(103),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= gic_spi(104),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= gic_spi(105),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi2_device = {
-	.name		= "sh_mobile_sdhi",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(sdhi2_resources),
-	.resource	= sdhi2_resources,
-	.dev	= {
-		.platform_data	= &sdhi2_info,
-	},
-};
-
-/* KEY */
-#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
-
-static struct gpio_keys_button gpio_buttons[] = {
-	GPIO_KEY(KEY_BACK,	GPIO_PCF8575_PORT10,	"SW3"),
-	GPIO_KEY(KEY_RIGHT,	GPIO_PCF8575_PORT11,	"SW2-R"),
-	GPIO_KEY(KEY_LEFT,	GPIO_PCF8575_PORT12,	"SW2-L"),
-	GPIO_KEY(KEY_ENTER,	GPIO_PCF8575_PORT13,	"SW2-P"),
-	GPIO_KEY(KEY_UP,	GPIO_PCF8575_PORT14,	"SW2-U"),
-	GPIO_KEY(KEY_DOWN,	GPIO_PCF8575_PORT15,	"SW2-D"),
-	GPIO_KEY(KEY_HOME,	GPIO_PCF8575_PORT16,	"SW1"),
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
-	.buttons	= gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
-	.name	= "gpio-keys",
-	.dev	= {
-		.platform_data  = &gpio_key_info,
-	},
-};
-
-/* FSI-AK4648 */
-static struct sh_fsi_platform_info fsi_info = {
-	.port_a = {
-		.tx_id = SHDMA_SLAVE_FSI2A_TX,
-	},
-};
-
-static struct resource fsi_resources[] = {
-	[0] = {
-		.name	= "FSI",
-		.start	= 0xEC230000,
-		.end	= 0xEC230400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(146),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device fsi_device = {
-	.name		= "sh_fsi2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(fsi_resources),
-	.resource	= fsi_resources,
-	.dev	= {
-		.platform_data	= &fsi_info,
-	},
-};
-
-static struct asoc_simple_card_info fsi2_ak4648_info = {
-	.name		= "AK4648",
-	.card		= "FSI2A-AK4648",
-	.codec		= "ak4642-codec.0-0012",
-	.platform	= "sh_fsi2",
-	.daifmt		= SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
-	.cpu_dai = {
-		.name	= "fsia-dai",
-	},
-	.codec_dai = {
-		.name	= "ak4642-hifi",
-		.sysclk	= 11289600,
-	},
-};
-
-static struct platform_device fsi_ak4648_device = {
-	.name	= "asoc-simple-card",
-	.dev	= {
-		.platform_data	= &fsi2_ak4648_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &fsi_ak4648_device.dev.coherent_dma_mask,
-	},
-};
-
-/* I2C */
-
-/* StepDown1 is used to supply 1.315V to the CPU */
-static struct regulator_init_data as3711_sd1 = {
-	.constraints = {
-		.name = "1.315V CPU",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 1315000,
-		.max_uV = 1335000,
-	},
-};
-
-/* StepDown2 is used to supply 1.8V to the CPU and to the board */
-static struct regulator_init_data as3711_sd2 = {
-	.constraints = {
-		.name = "1.8V",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 1800000,
-		.max_uV = 1800000,
-	},
-};
-
-/*
- * StepDown3 is switched in parallel with StepDown2, seems to be off,
- * according to read-back pre-set register values
- */
-
-/* StepDown4 is used to supply 1.215V to the CPU and to the board */
-static struct regulator_init_data as3711_sd4 = {
-	.constraints = {
-		.name = "1.215V",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 1215000,
-		.max_uV = 1235000,
-	},
-};
-
-/* LDO1 is unused and unconnected */
-
-/* LDO2 is used to supply 2.8V to the CPU */
-static struct regulator_init_data as3711_ldo2 = {
-	.constraints = {
-		.name = "2.8V CPU",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 2800000,
-		.max_uV = 2800000,
-	},
-};
-
-/* LDO3 is used to supply 3.0V to the CPU */
-static struct regulator_init_data as3711_ldo3 = {
-	.constraints = {
-		.name = "3.0V CPU",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 3000000,
-		.max_uV = 3000000,
-	},
-};
-
-/* LDO4 is used to supply 2.8V to the board */
-static struct regulator_init_data as3711_ldo4 = {
-	.constraints = {
-		.name = "2.8V",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 2800000,
-		.max_uV = 2800000,
-	},
-};
-
-/* LDO5 is switched parallel to LDO4, also set to 2.8V */
-static struct regulator_init_data as3711_ldo5 = {
-	.constraints = {
-		.name = "2.8V #2",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 2800000,
-		.max_uV = 2800000,
-	},
-};
-
-/* LDO6 is unused and unconnected */
-
-/* LDO7 is used to supply 1.15V to the CPU */
-static struct regulator_init_data as3711_ldo7 = {
-	.constraints = {
-		.name = "1.15V CPU",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 1150000,
-		.max_uV = 1150000,
-	},
-};
-
-/* LDO8 is switched parallel to LDO7, also set to 1.15V */
-static struct regulator_init_data as3711_ldo8 = {
-	.constraints = {
-		.name = "1.15V CPU #2",
-		.boot_on = 1,
-		.always_on = 1,
-		.min_uV = 1150000,
-		.max_uV = 1150000,
-	},
-};
-
-static struct as3711_platform_data as3711_pdata = {
-	.regulator	= {
-		.init_data	= {
-			[AS3711_REGULATOR_SD_1] = &as3711_sd1,
-			[AS3711_REGULATOR_SD_2] = &as3711_sd2,
-			[AS3711_REGULATOR_SD_4] = &as3711_sd4,
-			[AS3711_REGULATOR_LDO_2] = &as3711_ldo2,
-			[AS3711_REGULATOR_LDO_3] = &as3711_ldo3,
-			[AS3711_REGULATOR_LDO_4] = &as3711_ldo4,
-			[AS3711_REGULATOR_LDO_5] = &as3711_ldo5,
-			[AS3711_REGULATOR_LDO_7] = &as3711_ldo7,
-			[AS3711_REGULATOR_LDO_8] = &as3711_ldo8,
-		},
-	},
-	.backlight	= {
-		.su2_fb = "sh_mobile_lcdc_fb.0",
-		.su2_max_uA = 36000,
-		.su2_feedback = AS3711_SU2_CURR_AUTO,
-		.su2_fbprot = AS3711_SU2_GPIO4,
-		.su2_auto_curr1 = true,
-		.su2_auto_curr2 = true,
-		.su2_auto_curr3 = true,
-	},
-};
-
-static struct pcf857x_platform_data pcf8575_pdata = {
-	.gpio_base	= GPIO_PCF8575_BASE,
-};
-
-static struct i2c_board_info i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("ak4648", 0x12),
-	},
-	{
-		I2C_BOARD_INFO("r2025sd", 0x32),
-	},
-	{
-		I2C_BOARD_INFO("ak8975", 0x0c),
-		.irq = irq_pin(28), /* IRQ28 */
-	},
-	{
-		I2C_BOARD_INFO("adxl34x", 0x1d),
-		.irq = irq_pin(26), /* IRQ26 */
-	},
-	{
-		I2C_BOARD_INFO("as3711", 0x40),
-		.irq = intcs_evt2irq(0x3300), /* IRQ24 */
-		.platform_data = &as3711_pdata,
-	},
-};
-
-static struct i2c_board_info i2c1_devices[] = {
-	{
-		I2C_BOARD_INFO("st1232-ts", 0x55),
-		.irq = irq_pin(8), /* IRQ8 */
-	},
-};
-
-static struct i2c_board_info i2c3_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8575", 0x20),
-		.irq = irq_pin(19), /* IRQ19 */
-		.platform_data = &pcf8575_pdata,
-	},
-};
-
-static struct platform_device *kzm_devices[] __initdata = {
-	&smsc_device,
-	&usb_host_device,
-	&usbhs_device,
-	&lcdc_device,
-	&mmc_device,
-	&vcc_sdhi0,
-	&vcc_sdhi2,
-	&sdhi0_device,
-	&sdhi2_device,
-	&gpio_keys_device,
-	&fsi_device,
-	&fsi_ak4648_device,
-};
-
-static unsigned long pin_pullup_conf[] = {
-	PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
-};
-
-static const struct pinctrl_map kzm_pinctrl_map[] = {
-	/* FSIA (AK4648) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
-				  "fsia_mclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
-				  "fsia_sclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
-				  "fsia_data_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
-				  "fsia_data_out", "fsia"),
-	/* I2C3 */
-	PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0",
-				  "i2c3_1", "i2c3"),
-	/* LCD */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh73a0",
-				  "lcd_data24", "lcd"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh73a0",
-				  "lcd_sync", "lcd"),
-	/* MMCIF */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				  "mmc0_data8_0", "mmc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				  "mmc0_ctrl_0", "mmc0"),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				    "PORT279", pin_pullup_conf),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				      "mmc0_data8_0", pin_pullup_conf),
-	/* SCIFA4 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
-				  "scifa4_data", "scifa4"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
-				  "scifa4_ctrl", "scifa4"),
-	/* SDHI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_cd", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_wp", "sdhi0"),
-	/* SDHI2 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh73a0",
-				  "sdhi2_data4", "sdhi2"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh73a0",
-				  "sdhi2_ctrl", "sdhi2"),
-	/* SMSC */
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0",
-				  "bsc_cs4", "bsc"),
-	/* USB */
-	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-sh73a0",
-				  "usb_vbus", "usb"),
-};
-
-static void __init kzm_init(void)
-{
-	regulator_register_always_on(2, "fixed-1.8V", fixed1v8_power_consumers,
-				     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
-	regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map));
-
-	sh73a0_pinmux_init();
-
-	/* SMSC */
-	gpio_request_one(224, GPIOF_IN, NULL); /* IRQ3 */
-
-	/* LCDC */
-	gpio_request_one(222, GPIOF_OUT_INIT_HIGH, NULL); /* LCDCDON */
-	gpio_request_one(226, GPIOF_OUT_INIT_HIGH, NULL); /* SC */
-
-	/* Touchscreen */
-	gpio_request_one(223, GPIOF_IN, NULL); /* IRQ8 */
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Shared attribute override enable, 64K*8way */
-	l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff);
-#endif
-
-	i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
-	i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices));
-	i2c_register_board_info(3, i2c3_devices, ARRAY_SIZE(i2c3_devices));
-
-	sh73a0_add_standard_devices();
-	platform_add_devices(kzm_devices, ARRAY_SIZE(kzm_devices));
-
-	sh73a0_pm_init();
-}
-
-static void kzm9g_restart(enum reboot_mode mode, const char *cmd)
-{
-#define RESCNT2 IOMEM(0xe6188020)
-	/* Do soft power on reset */
-	writel((1 << 31), RESCNT2);
-}
-
-static const char *kzm9g_boards_compat_dt[] __initdata = {
-	"renesas,kzm9g",
-	NULL,
-};
-
-DT_MACHINE_START(KZM9G_DT, "kzm9g")
-	.smp		= smp_ops(sh73a0_smp_ops),
-	.map_io		= sh73a0_map_io,
-	.init_early	= sh73a0_add_early_devices,
-	.init_irq	= sh73a0_init_irq,
-	.init_machine	= kzm_init,
-	.init_late	= shmobile_init_late,
-	.init_time	= sh73a0_earlytimer_init,
-	.restart	= kzm9g_restart,
-	.dt_compat	= kzm9g_boards_compat_dt,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/include/mach/head-kzm9g.txt b/arch/arm/mach-shmobile/include/mach/head-kzm9g.txt
deleted file mode 100644
index 9531f46a822a..000000000000
--- a/arch/arm/mach-shmobile/include/mach/head-kzm9g.txt
+++ /dev/null
@@ -1,410 +0,0 @@
-LIST "KZM9G low-level initialization routine."
-LIST "Adapted from u-boot KZM9G support code."
-
-LIST "Copyright (C) 2013 Ulrich Hecht"
-
-LIST "This program is free software; you can redistribute it and/or modify"
-LIST "it under the terms of the GNU General Public License version 2 as"
-LIST "published by the Free Software Foundation."
-
-LIST "This program is distributed in the hope that it will be useful,"
-LIST "but WITHOUT ANY WARRANTY; without even the implied warranty of"
-LIST "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the"
-LIST "GNU General Public License for more details."
-
-
-LIST "Register definitions:"
-
-LIST "Secure control register"
-#define LIFEC_SEC_SRC (0xE6110008)
-
-LIST "RWDT"
-#define RWDT_BASE   (0xE6020000)
-#define RWTCSRA0 (RWDT_BASE + 0x04)
-
-LIST "HPB Semaphore Control Registers"
-#define HPBSCR_BASE (0xE6000000)
-#define HPBCTRL6 (HPBSCR_BASE + 0x1030)
-
-#define SBSC1_BASE  (0xFE400000)
-#define SDCR0A		(SBSC1_BASE + 0x0008)
-#define SDCR1A		(SBSC1_BASE + 0x000C)
-#define SDPCRA		(SBSC1_BASE + 0x0010)
-#define SDCR0SA		(SBSC1_BASE + 0x0018)
-#define SDCR1SA		(SBSC1_BASE + 0x001C)
-#define RTCSRA		(SBSC1_BASE + 0x0020)
-#define RTCORA		(SBSC1_BASE + 0x0028)
-#define RTCORHA		(SBSC1_BASE + 0x002C)
-#define SDWCRC0A	(SBSC1_BASE + 0x0040)
-#define SDWCRC1A	(SBSC1_BASE + 0x0044)
-#define SDWCR00A	(SBSC1_BASE + 0x0048)
-#define SDWCR01A	(SBSC1_BASE + 0x004C)
-#define SDWCR10A	(SBSC1_BASE + 0x0050)
-#define SDWCR11A	(SBSC1_BASE + 0x0054)
-#define SDWCR2A		(SBSC1_BASE + 0x0060)
-#define SDWCRC2A	(SBSC1_BASE + 0x0064)
-#define ZQCCRA		(SBSC1_BASE + 0x0068)
-#define SDMRACR0A	(SBSC1_BASE + 0x0084)
-#define SDMRTMPCRA	(SBSC1_BASE + 0x008C)
-#define SDMRTMPMSKA	(SBSC1_BASE + 0x0094)
-#define SDGENCNTA	(SBSC1_BASE + 0x009C)
-#define SDDRVCR0A	(SBSC1_BASE + 0x00B4)
-#define DLLCNT0A	(SBSC1_BASE + 0x0354)
-
-#define SDMRA1  (0xFE500000)
-#define SDMRA2  (0xFE5C0000)
-#define SDMRA3  (0xFE504000)
-
-#define SBSC2_BASE  (0xFB400000)
-#define SDCR0B		(SBSC2_BASE + 0x0008)
-#define SDCR1B		(SBSC2_BASE + 0x000C)
-#define SDPCRB		(SBSC2_BASE + 0x0010)
-#define SDCR0SB		(SBSC2_BASE + 0x0018)
-#define SDCR1SB		(SBSC2_BASE + 0x001C)
-#define RTCSRB		(SBSC2_BASE + 0x0020)
-#define RTCORB		(SBSC2_BASE + 0x0028)
-#define RTCORHB		(SBSC2_BASE + 0x002C)
-#define SDWCRC0B	(SBSC2_BASE + 0x0040)
-#define SDWCRC1B	(SBSC2_BASE + 0x0044)
-#define SDWCR00B	(SBSC2_BASE + 0x0048)
-#define SDWCR01B	(SBSC2_BASE + 0x004C)
-#define SDWCR10B	(SBSC2_BASE + 0x0050)
-#define SDWCR11B	(SBSC2_BASE + 0x0054)
-#define SDPDCR0B	(SBSC2_BASE + 0x0058)
-#define SDWCR2B		(SBSC2_BASE + 0x0060)
-#define SDWCRC2B	(SBSC2_BASE + 0x0064)
-#define ZQCCRB		(SBSC2_BASE + 0x0068)
-#define SDMRACR0B	(SBSC2_BASE + 0x0084)
-#define SDMRTMPCRB	(SBSC2_BASE + 0x008C)
-#define SDMRTMPMSKB	(SBSC2_BASE + 0x0094)
-#define SDGENCNTB	(SBSC2_BASE + 0x009C)
-#define DPHYCNT0B	(SBSC2_BASE + 0x00A0)
-#define DPHYCNT1B	(SBSC2_BASE + 0x00A4)
-#define DPHYCNT2B	(SBSC2_BASE + 0x00A8)
-#define SDDRVCR0B	(SBSC2_BASE + 0x00B4)
-#define DLLCNT0B	(SBSC2_BASE + 0x0354)
-
-#define SDMRB1  (0xFB500000)
-#define SDMRB2  (0xFB5C0000)
-#define SDMRB3  (0xFB504000)
-
-#define CPG_BASE   (0xE6150000)
-#define FRQCRA		(CPG_BASE + 0x0000)
-#define FRQCRB		(CPG_BASE + 0x0004)
-#define FRQCRD		(CPG_BASE + 0x00E4)
-#define VCLKCR1		(CPG_BASE + 0x0008)
-#define VCLKCR2		(CPG_BASE + 0x000C)
-#define VCLKCR3		(CPG_BASE + 0x001C)
-#define ZBCKCR		(CPG_BASE + 0x0010)
-#define FLCKCR		(CPG_BASE + 0x0014)
-#define SD0CKCR		(CPG_BASE + 0x0074)
-#define SD1CKCR		(CPG_BASE + 0x0078)
-#define SD2CKCR		(CPG_BASE + 0x007C)
-#define FSIACKCR	(CPG_BASE + 0x0018)
-#define SUBCKCR		(CPG_BASE + 0x0080)
-#define SPUACKCR	(CPG_BASE + 0x0084)
-#define SPUVCKCR	(CPG_BASE + 0x0094)
-#define MSUCKCR		(CPG_BASE + 0x0088)
-#define HSICKCR		(CPG_BASE + 0x008C)
-#define FSIBCKCR	(CPG_BASE + 0x0090)
-#define MFCK1CR		(CPG_BASE + 0x0098)
-#define MFCK2CR		(CPG_BASE + 0x009C)
-#define DSITCKCR	(CPG_BASE + 0x0060)
-#define DSI0PCKCR	(CPG_BASE + 0x0064)
-#define DSI1PCKCR	(CPG_BASE + 0x0068)
-#define DSI0PHYCR	(CPG_BASE + 0x006C)
-#define DVFSCR3		(CPG_BASE + 0x0174)
-#define DVFSCR4		(CPG_BASE + 0x0178)
-#define DVFSCR5		(CPG_BASE + 0x017C)
-#define MPMODE		(CPG_BASE + 0x00CC)
-
-#define PLLECR		(CPG_BASE + 0x00D0)
-#define PLL0CR		(CPG_BASE + 0x00D8)
-#define PLL1CR		(CPG_BASE + 0x0028)
-#define PLL2CR		(CPG_BASE + 0x002C)
-#define PLL3CR		(CPG_BASE + 0x00DC)
-#define PLL0STPCR	(CPG_BASE + 0x00F0)
-#define PLL1STPCR	(CPG_BASE + 0x00C8)
-#define PLL2STPCR	(CPG_BASE + 0x00F8)
-#define PLL3STPCR	(CPG_BASE + 0x00FC)
-#define RMSTPCR0	(CPG_BASE + 0x0110)
-#define RMSTPCR1	(CPG_BASE + 0x0114)
-#define RMSTPCR2	(CPG_BASE + 0x0118)
-#define RMSTPCR3	(CPG_BASE + 0x011C)
-#define RMSTPCR4	(CPG_BASE + 0x0120)
-#define RMSTPCR5	(CPG_BASE + 0x0124)
-#define SMSTPCR0	(CPG_BASE + 0x0130)
-#define SMSTPCR2	(CPG_BASE + 0x0138)
-#define SMSTPCR3	(CPG_BASE + 0x013C)
-#define CPGXXCR4	(CPG_BASE + 0x0150)
-#define SRCR0		(CPG_BASE + 0x80A0)
-#define SRCR2		(CPG_BASE + 0x80B0)
-#define SRCR3		(CPG_BASE + 0x80A8)
-#define VREFCR		(CPG_BASE + 0x00EC)
-#define PCLKCR		(CPG_BASE + 0x1020)
-
-#define PORT32CR (0xE6051020)
-#define PORT33CR (0xE6051021)
-#define PORT34CR (0xE6051022)
-#define PORT35CR (0xE6051023)
-
-LIST "DRAM initialization code:"
-
-EW RWTCSRA0, 0xA507
-
-ED_AND LIFEC_SEC_SRC, 0xFFFF7FFF
-
-ED_AND SMSTPCR3,0xFFFF7FFF
-ED_AND SRCR3, 0xFFFF7FFF
-ED_AND SMSTPCR2,0xFFFBFFFF
-ED_AND SRCR2, 0xFFFBFFFF
-ED PLLECR, 0x00000000
-
-WAIT_MASK PLLECR, 0x00000F00, 0x00000000
-WAIT_MASK FRQCRB, 0x80000000, 0x00000000
-
-ED PLL0CR, 0x2D000000
-ED PLL1CR, 0x17100000
-ED FRQCRB, 0x96235880
-WAIT_MASK FRQCRB, 0x80000000, 0x00000000
-
-ED FLCKCR, 0x0000000B
-ED_AND SMSTPCR0, 0xFFFFFFFD
-
-ED_AND SRCR0, 0xFFFFFFFD
-ED 0xE6001628, 0x514
-ED 0xE6001648, 0x514
-ED 0xE6001658, 0x514
-ED 0xE6001678, 0x514
-
-ED DVFSCR4, 0x00092000
-ED DVFSCR5, 0x000000DC
-ED PLLECR, 0x00000000
-WAIT_MASK PLLECR, 0x00000F00, 0x00000000
-
-ED FRQCRA, 0x0012453C
-ED FRQCRB, 0x80431350
-WAIT_MASK FRQCRB, 0x80000000, 0x00000000
-ED FRQCRD, 0x00000B0B
-WAIT_MASK FRQCRD, 0x80000000, 0x00000000
-
-ED PCLKCR, 0x00000003
-ED VCLKCR1, 0x0000012F
-ED VCLKCR2, 0x00000119
-ED VCLKCR3, 0x00000119
-ED ZBCKCR, 0x00000002
-ED FLCKCR, 0x00000005
-ED SD0CKCR, 0x00000080
-ED SD1CKCR, 0x00000080
-ED SD2CKCR, 0x00000080
-ED FSIACKCR, 0x0000003F
-ED FSIBCKCR, 0x0000003F
-ED SUBCKCR, 0x00000080
-ED SPUACKCR, 0x0000000B
-ED SPUVCKCR, 0x0000000B
-ED MSUCKCR, 0x0000013F
-ED HSICKCR, 0x00000080
-ED MFCK1CR, 0x0000003F
-ED MFCK2CR, 0x0000003F
-ED DSITCKCR, 0x00000107
-ED DSI0PCKCR, 0x00000313
-ED DSI1PCKCR, 0x0000130D
-ED DSI0PHYCR, 0x2A800E0E
-ED PLL0CR, 0x1E000000
-ED PLL0CR, 0x2D000000
-ED PLL1CR, 0x17100000
-ED PLL2CR, 0x27000080
-ED PLL3CR, 0x1D000000
-ED PLL0STPCR, 0x00080000
-ED PLL1STPCR, 0x000120C0
-ED PLL2STPCR, 0x00012000
-ED PLL3STPCR, 0x00000030
-ED PLLECR, 0x0000000B
-WAIT_MASK PLLECR, 0x00000B00, 0x00000B00
-
-ED DVFSCR3, 0x000120F0
-ED MPMODE, 0x00000020
-ED VREFCR, 0x0000028A
-ED RMSTPCR0, 0xE4628087
-ED RMSTPCR1, 0xFFFFFFFF
-ED RMSTPCR2, 0x53FFFFFF
-ED RMSTPCR3, 0xFFFFFFFF
-ED RMSTPCR4, 0x00800D3D
-ED RMSTPCR5, 0xFFFFF3FF
-ED SMSTPCR2, 0x00000000
-ED SRCR2,  0x00040000
-ED_AND PLLECR, 0xFFFFFFF7
-WAIT_MASK PLLECR, 0x00000800, 0x00000000
-
-LIST "set SBSC operational"
-ED HPBCTRL6, 0x00000001
-WAIT_MASK HPBCTRL6, 0x00000001, 0x00000001
-
-LIST "set SBSC operating frequency"
-ED FRQCRD, 0x00001414
-WAIT_MASK FRQCRD, 0x80000000, 0x00000000
-ED PLL3CR, 0x1D000000
-ED_OR PLLECR, 0x00000008
-WAIT_MASK PLLECR, 0x00000800, 0x00000800
-
-LIST "enable DLL oscillation in DDRPHY"
-ED_OR DLLCNT0A, 0x00000002
-
-LIST "wait >= 100 ns"
-ED SDGENCNTA, 0x00000005
-WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
-
-LIST "target LPDDR2 device settings"
-ED SDCR0A, 0xACC90159
-ED SDCR1A, 0x00010059
-ED SDWCRC0A, 0x50874114
-ED SDWCRC1A, 0x33199B37
-ED SDWCRC2A, 0x008F2313
-ED SDWCR00A, 0x31020707
-ED SDWCR01A, 0x0017040A
-ED SDWCR10A, 0x31020707
-ED SDWCR11A, 0x0017040A
-
-ED SDDRVCR0A, 0x055557ff
-
-ED SDWCR2A, 0x30000000
-
-LIST "drive CKE high"
-ED_OR SDPCRA, 0x00000080
-WAIT_MASK SDPCRA, 0x00000080, 0x00000080
-
-LIST "wait >= 200 us"
-ED SDGENCNTA, 0x00002710
-WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
-
-LIST "issue reset command to LPDDR2 device"
-ED SDMRACR0A, 0x0000003F
-ED SDMRA1, 0x00000000
-
-LIST "wait >= 10 (or 1) us (docs inconsistent)"
-ED SDGENCNTA, 0x000001F4
-WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
-
-LIST "MRW ZS initialization calibration command"
-ED SDMRACR0A, 0x0000FF0A
-ED SDMRA3, 0x00000000
-
-LIST "wait >= 1 us"
-ED SDGENCNTA, 0x00000032
-WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
-
-LIST "specify operating mode in LPDDR2"
-ED SDMRACR0A, 0x00002201
-ED SDMRA1, 0x00000000
-ED SDMRACR0A, 0x00000402
-ED SDMRA1, 0x00000000
-ED SDMRACR0A, 0x00000203
-ED SDMRA1, 0x00000000
-
-LIST "initialize DDR interface"
-ED SDMRA2, 0x00000000
-
-LIST "temperature sensor control"
-ED SDMRTMPCRA, 0x88800004
-ED SDMRTMPMSKA,0x00000004
-
-LIST "auto-refreshing control"
-ED RTCORA, 0xA55A0032
-ED RTCORHA, 0xA55A000C
-ED RTCSRA, 0xA55A2048
-
-ED_OR SDCR0A, 0x00000800
-ED_OR SDCR1A, 0x00000400
-
-LIST "auto ZQ calibration control"
-ED ZQCCRA, 0xFFF20000
-
-ED_OR DLLCNT0B, 0x00000002
-ED SDGENCNTB, 0x00000005
-WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
-
-ED SDCR0B, 0xACC90159
-ED SDCR1B, 0x00010059
-ED SDWCRC0B, 0x50874114
-ED SDWCRC1B, 0x33199B37
-ED SDWCRC2B, 0x008F2313
-ED SDWCR00B, 0x31020707
-ED SDWCR01B, 0x0017040A
-ED SDWCR10B, 0x31020707
-ED SDWCR11B, 0x0017040A
-ED SDDRVCR0B, 0x055557ff
-ED SDWCR2B, 0x30000000
-ED_OR SDPCRB, 0x00000080
-WAIT_MASK SDPCRB, 0x00000080, 0x00000080
-
-ED SDGENCNTB, 0x00002710
-WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
-ED SDMRACR0B, 0x0000003F
-
-LIST "upstream u-boot writes to SDMRA1A for both SBSC 1 and 2, which does"
-LIST "not seem to make a lot of sense..."
-ED SDMRB1, 0x00000000
-
-ED SDGENCNTB, 0x000001F4
-WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
-
-ED SDMRACR0B, 0x0000FF0A
-ED SDMRB3, 0x00000000
-ED SDGENCNTB, 0x00000032
-WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
-
-ED SDMRACR0B, 0x00002201
-ED SDMRB1, 0x00000000
-ED SDMRACR0B, 0x00000402
-ED SDMRB1, 0x00000000
-ED SDMRACR0B, 0x00000203
-ED SDMRB1, 0x00000000
-ED SDMRB2, 0x00000000
-ED SDMRTMPCRB, 0x88800004
-ED SDMRTMPMSKB, 0x00000004
-ED RTCORB,  0xA55A0032
-ED RTCORHB, 0xA55A000C
-ED RTCSRB,  0xA55A2048
-ED_OR SDCR0B, 0x00000800
-ED_OR SDCR1B, 0x00000400
-ED ZQCCRB, 0xFFF20000
-ED_OR SDPDCR0B, 0x00030000
-ED DPHYCNT1B, 0xA5390000
-ED DPHYCNT0B, 0x00001200
-ED DPHYCNT1B, 0x07CE0000
-ED DPHYCNT0B, 0x00001247
-WAIT_MASK DPHYCNT2B, 0xFFFFFFFF, 0x07CE0000
-
-ED_AND SDPDCR0B, 0xFFFCFFFF
-
-ED FRQCRD, 0x00000B0B
-WAIT_MASK FRQCRD, 0x80000000, 0x00000000
-
-ED CPGXXCR4, 0xfffffffc
-
-LIST "Setup SCIF4 / workaround"
-EB PORT32CR, 0x12
-EB PORT33CR, 0x22
-EB PORT34CR, 0x12
-EB PORT35CR, 0x22
-
-EW 0xE6C80000, 0
-EB 0xE6C80004, 0x19
-EW 0xE6C80008, 0x0030
-EW 0xE6C80018, 0
-EW 0xE6C80030, 0x0014
-
-LIST "Magic to avoid hangs and corruption on DRAM writes."
-
-LIST "It has been observed that the system would most often hang while"
-LIST "decompressing the kernel, and if it didn't it would always write"
-LIST "a corrupt image to DRAM."
-LIST "This problem does not occur in u-boot, and the reason is that"
-LIST "u-boot performs an additional cache invalidation after setting up"
-LIST "the DRAM controller. Such an invalidation should not be necessary at"
-LIST "this point, and attempts at removing parts of the routine to arrive"
-LIST "at the minimal snippet of code necessary to avoid the DRAM stability"
-LIST "problem yielded the following:"
-
-MRC p15, 0, r0, c1, c0, 0
-MCR p15, 0, r0, c1, c0, 0
diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h
index 175ee05465da..80f599f4b5ab 100644
--- a/arch/arm/mach-shmobile/include/mach/zboot.h
+++ b/arch/arm/mach-shmobile/include/mach/zboot.h
@@ -9,11 +9,6 @@
  *
  **************************************************/
 
-#ifdef CONFIG_MACH_KZM9G
-#define MEMORY_START	0x43000000
-#include "mach/head-kzm9g.txt"
-#else
 #error "unsupported board."
-#endif
 
 #endif /* ZBOOT_H */
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
deleted file mode 100644
index fd63ae6532fc..000000000000
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ /dev/null
@@ -1,337 +0,0 @@
-/*
- * sh73a0 processor support - INTC hardware block
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/arm-gic.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "intc.h"
-#include "irqs.h"
-#include "sh73a0.h"
-
-enum {
-	UNUSED = 0,
-
-	/* interrupt sources INTCS */
-	PINTCS_PINT1, PINTCS_PINT2,
-	RTDMAC_0_DEI0, RTDMAC_0_DEI1, RTDMAC_0_DEI2, RTDMAC_0_DEI3,
-	CEU, MFI, BBIF2, VPU, TSIF1, _3DG_SGX543, _2DDMAC_2DDM0,
-	RTDMAC_1_DEI4, RTDMAC_1_DEI5, RTDMAC_1_DADERR,
-	KEYSC_KEY, VINT, MSIOF,
-	TMU0_TUNI00, TMU0_TUNI01, TMU0_TUNI02,
-	CMT0, TSIF0, CMT2, LMB, MSUG, MSU_MSU, MSU_MSU2,
-	CTI, RWDT0, ICB, PEP, ASA, JPU_JPEG, LCDC, LCRC,
-	RTDMAC_2_DEI6, RTDMAC_2_DEI7, RTDMAC_2_DEI8, RTDMAC_2_DEI9,
-	RTDMAC_3_DEI10, RTDMAC_3_DEI11,
-	FRC, GCU, LCDC1, CSIRX,
-	DSITX0_DSITX00, DSITX0_DSITX01,
-	SPU2_SPU0, SPU2_SPU1, FSI,
-	TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12,
-	TSIF2, CMT4, MFIS2, CPORTS2R, TSG, DMASCH1, SCUW,
-	VIO60, VIO61, CEU21, CSI21, DSITX1_DSITX10, DSITX1_DSITX11,
-	DISP, DSRV, EMUX2_EMUX20I, EMUX2_EMUX21I,
-	MSTIF0_MST00I, MSTIF0_MST01I, MSTIF1_MST10I, MSTIF1_MST11I,
-	SPUV,
-
-	/* interrupt groups INTCS */
-	RTDMAC_0, RTDMAC_1, RTDMAC_2, RTDMAC_3,
-	DSITX0, SPU2, TMU1, MSU,
-};
-
-static struct intc_vect intcs_vectors[] = {
-	INTCS_VECT(PINTCS_PINT1, 0x0600), INTCS_VECT(PINTCS_PINT2, 0x0620),
-	INTCS_VECT(RTDMAC_0_DEI0, 0x0800), INTCS_VECT(RTDMAC_0_DEI1, 0x0820),
-	INTCS_VECT(RTDMAC_0_DEI2, 0x0840), INTCS_VECT(RTDMAC_0_DEI3, 0x0860),
-	INTCS_VECT(CEU, 0x0880), INTCS_VECT(MFI, 0x0900),
-	INTCS_VECT(BBIF2, 0x0960), INTCS_VECT(VPU, 0x0980),
-	INTCS_VECT(TSIF1, 0x09a0), INTCS_VECT(_3DG_SGX543, 0x09e0),
-	INTCS_VECT(_2DDMAC_2DDM0, 0x0a00),
-	INTCS_VECT(RTDMAC_1_DEI4, 0x0b80), INTCS_VECT(RTDMAC_1_DEI5, 0x0ba0),
-	INTCS_VECT(RTDMAC_1_DADERR, 0x0bc0),
-	INTCS_VECT(KEYSC_KEY, 0x0be0), INTCS_VECT(VINT, 0x0c80),
-	INTCS_VECT(MSIOF, 0x0d20),
-	INTCS_VECT(TMU0_TUNI00, 0x0e80), INTCS_VECT(TMU0_TUNI01, 0x0ea0),
-	INTCS_VECT(TMU0_TUNI02, 0x0ec0),
-	INTCS_VECT(CMT0, 0x0f00), INTCS_VECT(TSIF0, 0x0f20),
-	INTCS_VECT(CMT2, 0x0f40), INTCS_VECT(LMB, 0x0f60),
-	INTCS_VECT(MSUG, 0x0f80),
-	INTCS_VECT(MSU_MSU, 0x0fa0), INTCS_VECT(MSU_MSU2, 0x0fc0),
-	INTCS_VECT(CTI, 0x0400), INTCS_VECT(RWDT0, 0x0440),
-	INTCS_VECT(ICB, 0x0480), INTCS_VECT(PEP, 0x04a0),
-	INTCS_VECT(ASA, 0x04c0), INTCS_VECT(JPU_JPEG, 0x0560),
-	INTCS_VECT(LCDC, 0x0580), INTCS_VECT(LCRC, 0x05a0),
-	INTCS_VECT(RTDMAC_2_DEI6, 0x1300), INTCS_VECT(RTDMAC_2_DEI7, 0x1320),
-	INTCS_VECT(RTDMAC_2_DEI8, 0x1340), INTCS_VECT(RTDMAC_2_DEI9, 0x1360),
-	INTCS_VECT(RTDMAC_3_DEI10, 0x1380), INTCS_VECT(RTDMAC_3_DEI11, 0x13a0),
-	INTCS_VECT(FRC, 0x1700), INTCS_VECT(GCU, 0x1760),
-	INTCS_VECT(LCDC1, 0x1780), INTCS_VECT(CSIRX, 0x17a0),
-	INTCS_VECT(DSITX0_DSITX00, 0x17c0), INTCS_VECT(DSITX0_DSITX01, 0x17e0),
-	INTCS_VECT(SPU2_SPU0, 0x1800), INTCS_VECT(SPU2_SPU1, 0x1820),
-	INTCS_VECT(FSI, 0x1840),
-	INTCS_VECT(TMU1_TUNI10, 0x1900), INTCS_VECT(TMU1_TUNI11, 0x1920),
-	INTCS_VECT(TMU1_TUNI12, 0x1940),
-	INTCS_VECT(TSIF2, 0x1960), INTCS_VECT(CMT4, 0x1980),
-	INTCS_VECT(MFIS2, 0x1a00), INTCS_VECT(CPORTS2R, 0x1a20),
-	INTCS_VECT(TSG, 0x1ae0), INTCS_VECT(DMASCH1, 0x1b00),
-	INTCS_VECT(SCUW, 0x1b40),
-	INTCS_VECT(VIO60, 0x1b60), INTCS_VECT(VIO61, 0x1b80),
-	INTCS_VECT(CEU21, 0x1ba0), INTCS_VECT(CSI21, 0x1be0),
-	INTCS_VECT(DSITX1_DSITX10, 0x1c00), INTCS_VECT(DSITX1_DSITX11, 0x1c20),
-	INTCS_VECT(DISP, 0x1c40), INTCS_VECT(DSRV, 0x1c60),
-	INTCS_VECT(EMUX2_EMUX20I, 0x1c80), INTCS_VECT(EMUX2_EMUX21I, 0x1ca0),
-	INTCS_VECT(MSTIF0_MST00I, 0x1cc0), INTCS_VECT(MSTIF0_MST01I, 0x1ce0),
-	INTCS_VECT(MSTIF1_MST10I, 0x1d00), INTCS_VECT(MSTIF1_MST11I, 0x1d20),
-	INTCS_VECT(SPUV, 0x2300),
-};
-
-static struct intc_group intcs_groups[] __initdata = {
-	INTC_GROUP(RTDMAC_0, RTDMAC_0_DEI0, RTDMAC_0_DEI1,
-		   RTDMAC_0_DEI2, RTDMAC_0_DEI3),
-	INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI4, RTDMAC_1_DEI5, RTDMAC_1_DADERR),
-	INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI6, RTDMAC_2_DEI7,
-		   RTDMAC_2_DEI8, RTDMAC_2_DEI9),
-	INTC_GROUP(RTDMAC_3, RTDMAC_3_DEI10, RTDMAC_3_DEI11),
-	INTC_GROUP(TMU1, TMU1_TUNI12, TMU1_TUNI11, TMU1_TUNI10),
-	INTC_GROUP(DSITX0, DSITX0_DSITX00, DSITX0_DSITX01),
-	INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1),
-	INTC_GROUP(MSU, MSU_MSU, MSU_MSU2),
-};
-
-static struct intc_mask_reg intcs_mask_registers[] = {
-	{ 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */
-	  { 0, 0, 0, CEU,
-	    0, 0, 0, 0 } },
-	{ 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */
-	  { 0, 0, 0, VPU,
-	    BBIF2, 0, 0, MFI } },
-	{ 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */
-	  { 0, 0, 0, _2DDMAC_2DDM0,
-	    0, ASA, PEP, ICB } },
-	{ 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */
-	  { 0, 0, 0, CTI,
-	    JPU_JPEG, 0, LCRC, LCDC } },
-	{ 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */
-	  { KEYSC_KEY, RTDMAC_1_DADERR, RTDMAC_1_DEI5, RTDMAC_1_DEI4,
-	    RTDMAC_0_DEI3, RTDMAC_0_DEI2, RTDMAC_0_DEI1, RTDMAC_0_DEI0 } },
-	{ 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */
-	  { 0, 0, MSIOF, 0,
-	    _3DG_SGX543, 0, 0, 0 } },
-	{ 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */
-	  { 0, TMU0_TUNI02, TMU0_TUNI01, TMU0_TUNI00,
-	    0, 0, 0, 0 } },
-	{ 0xffd201a0, 0xffd201e0, 8, /* IMR8SA / IMCR8SA */
-	  { 0, 0, 0, 0,
-	    0, MSU_MSU, MSU_MSU2, MSUG } },
-	{ 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */
-	  { 0, RWDT0, CMT2, CMT0,
-	    0, 0, 0, 0 } },
-	{ 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */
-	  { 0, 0, 0, 0,
-	    0, TSIF1, LMB, TSIF0 } },
-	{ 0xffd201b0, 0xffd201f0, 8, /* IMR12SA / IMCR12SA */
-	  { 0, 0, 0, 0,
-	    0, 0, PINTCS_PINT2, PINTCS_PINT1 } },
-	{ 0xffd50180, 0xffd501c0, 8, /* IMR0SA3 / IMCR0SA3 */
-	  { RTDMAC_2_DEI6, RTDMAC_2_DEI7, RTDMAC_2_DEI8, RTDMAC_2_DEI9,
-	    RTDMAC_3_DEI10, RTDMAC_3_DEI11, 0, 0 } },
-	{ 0xffd50190, 0xffd501d0, 8, /* IMR4SA3 / IMCR4SA3 */
-	  { FRC, 0, 0, GCU,
-	    LCDC1, CSIRX, DSITX0_DSITX00, DSITX0_DSITX01 } },
-	{ 0xffd50194, 0xffd501d4, 8, /* IMR5SA3 / IMCR5SA3 */
-	  { SPU2_SPU0, SPU2_SPU1, FSI, 0,
-	    0, 0, 0, 0 } },
-	{ 0xffd50198, 0xffd501d8, 8, /* IMR6SA3 / IMCR6SA3 */
-	  { TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12, 0,
-	    TSIF2, CMT4, 0, 0 } },
-	{ 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */
-	  { MFIS2, CPORTS2R, 0, 0,
-	    0, 0, 0, TSG } },
-	{ 0xffd501a0, 0xffd501e0, 8, /* IMR8SA3 / IMCR8SA3 */
-	  { DMASCH1, 0, SCUW, VIO60,
-	    VIO61, CEU21, 0, CSI21 } },
-	{ 0xffd501a4, 0xffd501e4, 8, /* IMR9SA3 / IMCR9SA3 */
-	  { DSITX1_DSITX10, DSITX1_DSITX11, DISP, DSRV,
-	    EMUX2_EMUX20I, EMUX2_EMUX21I, MSTIF0_MST00I, MSTIF0_MST01I } },
-	{ 0xffd501a8, 0xffd501e8, 8, /* IMR10SA3 / IMCR10SA3 */
-	  { MSTIF0_MST00I, MSTIF0_MST01I, 0, 0,
-	    0, 0, 0, 0  } },
-	{ 0xffd60180, 0xffd601c0, 8, /* IMR0SA4 / IMCR0SA4 */
-	  { SPUV, 0, 0, 0,
-	    0, 0, 0, 0  } },
-};
-
-/* Priority is needed for INTCA to receive the INTCS interrupt */
-static struct intc_prio_reg intcs_prio_registers[] = {
-	{ 0xffd20000, 0, 16, 4, /* IPRAS */ { CTI, 0, _2DDMAC_2DDM0, ICB } },
-	{ 0xffd20004, 0, 16, 4, /* IPRBS */ { JPU_JPEG, LCDC, 0, LCRC } },
-	{ 0xffd20008, 0, 16, 4, /* IPRCS */ { BBIF2, 0, 0, 0 } },
-	{ 0xffd2000c, 0, 16, 4, /* IPRDS */ { PINTCS_PINT1, PINTCS_PINT2,
-					      0, 0 } },
-	{ 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_0, CEU, MFI, VPU } },
-	{ 0xffd20014, 0, 16, 4, /* IPRFS */ { KEYSC_KEY, RTDMAC_1,
-					      CMT2, CMT0 } },
-	{ 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU0_TUNI00, TMU0_TUNI01,
-					      TMU0_TUNI02, TSIF1 } },
-	{ 0xffd2001c, 0, 16, 4, /* IPRHS */ { VINT, 0, 0, 0 } },
-	{ 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, 0 } },
-	{ 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, _3DG_SGX543, MSUG, MSU } },
-	{ 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, ASA, LMB, PEP } },
-	{ 0xffd20030, 0, 16, 4, /* IPRMS */ { 0, 0, 0, RWDT0 } },
-	{ 0xffd50000, 0, 16, 4, /* IPRAS3 */ { RTDMAC_2, 0, 0, 0 } },
-	{ 0xffd50004, 0, 16, 4, /* IPRBS3 */ { RTDMAC_3, 0, 0, 0 } },
-	{ 0xffd50020, 0, 16, 4, /* IPRIS3 */ { FRC, 0, 0, 0 } },
-	{ 0xffd50024, 0, 16, 4, /* IPRJS3 */ { LCDC1, CSIRX, DSITX0, 0 } },
-	{ 0xffd50028, 0, 16, 4, /* IPRKS3 */ { SPU2, 0, FSI, 0 } },
-	{ 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, TSIF2 } },
-	{ 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, 0, 0, 0 } },
-	{ 0xffd50038, 0, 16, 4, /* IPROS3 */ { MFIS2, CPORTS2R, 0, 0 } },
-	{ 0xffd50040, 0, 16, 4, /* IPRQS3 */ { DMASCH1, 0, SCUW, VIO60 } },
-	{ 0xffd50044, 0, 16, 4, /* IPRRS3 */ { VIO61, CEU21, 0, CSI21 } },
-	{ 0xffd50048, 0, 16, 4, /* IPRSS3 */ { DSITX1_DSITX10, DSITX1_DSITX11,
-					       DISP, DSRV } },
-	{ 0xffd5004c, 0, 16, 4, /* IPRTS3 */ { EMUX2_EMUX20I, EMUX2_EMUX21I,
-					       MSTIF0_MST00I, MSTIF0_MST01I } },
-	{ 0xffd50050, 0, 16, 4, /* IPRUS3 */ { MSTIF1_MST10I, MSTIF1_MST11I,
-					       0, 0 } },
-	{ 0xffd60000, 0, 16, 4, /* IPRAS4 */ { SPUV, 0, 0, 0 } },
-};
-
-static struct resource intcs_resources[] __initdata = {
-	[0] = {
-		.start	= 0xffd20000,
-		.end	= 0xffd201ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0xffd50000,
-		.end	= 0xffd501ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 0xffd60000,
-		.end	= 0xffd601ff,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct intc_desc intcs_desc __initdata = {
-	.name = "sh73a0-intcs",
-	.resource = intcs_resources,
-	.num_resources = ARRAY_SIZE(intcs_resources),
-	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
-			   intcs_prio_registers, NULL, NULL),
-};
-
-static struct irqaction sh73a0_intcs_cascade;
-
-static irqreturn_t sh73a0_intcs_demux(int irq, void *dev_id)
-{
-	unsigned int evtcodeas = ioread32((void __iomem *)dev_id);
-
-	generic_handle_irq(intcs_evt2irq(evtcodeas));
-
-	return IRQ_HANDLED;
-}
-
-#define PINTER0_PHYS 0xe69000a0
-#define PINTER1_PHYS 0xe69000a4
-#define PINTER0_VIRT IOMEM(0xe69000a0)
-#define PINTER1_VIRT IOMEM(0xe69000a4)
-#define PINTRR0 IOMEM(0xe69000d0)
-#define PINTRR1 IOMEM(0xe69000d4)
-
-#define PINT0A_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq))
-#define PINT0B_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 8))
-#define PINT0C_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 16))
-#define PINT0D_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 24))
-#define PINT1E_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT1_IRQ(irq))
-
-INTC_PINT(intc_pint0, PINTER0_PHYS, 0xe69000b0, "sh73a0-pint0",		\
-  INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D),	\
-  INTC_PINT_V(A, PINT0A_IRQ), INTC_PINT_V(B, PINT0B_IRQ),		\
-  INTC_PINT_V(C, PINT0C_IRQ), INTC_PINT_V(D, PINT0D_IRQ),		\
-  INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D),	\
-  INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D));
-
-INTC_PINT(intc_pint1, PINTER1_PHYS, 0xe69000c0, "sh73a0-pint1",		\
-  INTC_PINT_E(E), INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, \
-  INTC_PINT_V(E, PINT1E_IRQ), INTC_PINT_V_NONE,				\
-  INTC_PINT_V_NONE, INTC_PINT_V_NONE,					\
-  INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E(E), \
-  INTC_PINT_E(E), INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E_NONE);
-
-static struct irqaction sh73a0_pint0_cascade;
-static struct irqaction sh73a0_pint1_cascade;
-
-static void pint_demux(void __iomem *rr, void __iomem *er, int base_irq)
-{
-	unsigned long value =  ioread32(rr) & ioread32(er);
-	int k;
-
-	for (k = 0; k < 32; k++) {
-		if (value & (1 << (31 - k))) {
-			generic_handle_irq(base_irq + k);
-			iowrite32(~(1 << (31 - k)), rr);
-		}
-	}
-}
-
-static irqreturn_t sh73a0_pint0_demux(int irq, void *dev_id)
-{
-	pint_demux(PINTRR0, PINTER0_VIRT, SH73A0_PINT0_IRQ(0));
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t sh73a0_pint1_demux(int irq, void *dev_id)
-{
-	pint_demux(PINTRR1, PINTER1_VIRT, SH73A0_PINT1_IRQ(0));
-	return IRQ_HANDLED;
-}
-
-void __init sh73a0_init_irq(void)
-{
-	void __iomem *gic_dist_base = IOMEM(0xf0001000);
-	void __iomem *gic_cpu_base = IOMEM(0xf0000100);
-	void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
-
-	gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE);
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-
-	register_intc_controller(&intcs_desc);
-	register_intc_controller(&intc_pint0_desc);
-	register_intc_controller(&intc_pint1_desc);
-
-	/* demux using INTEVTSA */
-	sh73a0_intcs_cascade.name = "INTCS cascade";
-	sh73a0_intcs_cascade.handler = sh73a0_intcs_demux;
-	sh73a0_intcs_cascade.dev_id = intevtsa;
-	setup_irq(gic_spi(50), &sh73a0_intcs_cascade);
-
-	/* PINT pins are sanely tied to the GIC as SPI */
-	sh73a0_pint0_cascade.name = "PINT0 cascade";
-	sh73a0_pint0_cascade.handler = sh73a0_pint0_demux;
-	setup_irq(gic_spi(33), &sh73a0_pint0_cascade);
-
-	sh73a0_pint1_cascade.name = "PINT1 cascade";
-	sh73a0_pint1_cascade.handler = sh73a0_pint1_demux;
-	setup_irq(gic_spi(34), &sh73a0_pint1_cascade);
-}
-- 
2.1.4

[PATCH 05/16] ARM: shmobile: Remove legacy kzm9g_defconfig

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The legacy board code for KZM-A9-GT has been removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 MAINTAINERS                      |   1 -
 arch/arm/configs/kzm9g_defconfig | 154 ---------------------------------------
 2 files changed, 155 deletions(-)
 delete mode 100644 arch/arm/configs/kzm9g_defconfig

diff --git a/MAINTAINERS b/MAINTAINERS
index 8133cefb6b6e..ee6e74ca5f03 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1466,7 +1466,6 @@ F:	arch/arm/boot/dts/r8a*
 F:	arch/arm/boot/dts/sh*
 F:	arch/arm/configs/armadillo800eva_defconfig
 F:	arch/arm/configs/bockw_defconfig
-F:	arch/arm/configs/kzm9g_defconfig
 F:	arch/arm/configs/marzen_defconfig
 F:	arch/arm/configs/shmobile_defconfig
 F:	arch/arm/include/debug/renesas-scif.S
diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
deleted file mode 100644
index 23e8d146dc16..000000000000
--- a/arch/arm/configs/kzm9g_defconfig
+++ /dev/null
@@ -1,154 +0,0 @@
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT\x16
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE_LEGACY=y
-CONFIG_ARCH_SH73A0=y
-CONFIG_MACH_KZM9G=y
-CONFIG_MEMORY_START=0x41000000
-CONFIG_MEMORY_SIZE=0x1f000000
-CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SMP=y
-CONFIG_SCHED_MC=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_KEXEC=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_SH_IRDA=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_SPARSEKMAP=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ST1232=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_ADXL34X=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=9
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_GPIO_PCF857X=y
-# CONFIG_HWMON is not set
-CONFIG_MFD_AS3711=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_AS3711=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_BACKLIGHT_AS3711=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_FB_SH_MOBILE_MERAM=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_SH4_FSI=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_RENESAS_USBHS=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_RENESAS_USBHS_UDC=y
-CONFIG_USB_ETH=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_DMADEVICES=y
-CONFIG_SH_DMAE=y
-CONFIG_ASYNC_TX_DMA=y
-CONFIG_STAGING=y
-CONFIG_IIO=y
-CONFIG_AK8975=y
-# CONFIG_DNOTIFY is not set
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRC16=y
-- 
2.1.4

[PATCH 05/16] ARM: shmobile: Remove legacy kzm9g_defconfig

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The legacy board code for KZM-A9-GT has been removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 MAINTAINERS                      |   1 -
 arch/arm/configs/kzm9g_defconfig | 154 ---------------------------------------
 2 files changed, 155 deletions(-)
 delete mode 100644 arch/arm/configs/kzm9g_defconfig

diff --git a/MAINTAINERS b/MAINTAINERS
index 8133cefb6b6e..ee6e74ca5f03 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1466,7 +1466,6 @@ F:	arch/arm/boot/dts/r8a*
 F:	arch/arm/boot/dts/sh*
 F:	arch/arm/configs/armadillo800eva_defconfig
 F:	arch/arm/configs/bockw_defconfig
-F:	arch/arm/configs/kzm9g_defconfig
 F:	arch/arm/configs/marzen_defconfig
 F:	arch/arm/configs/shmobile_defconfig
 F:	arch/arm/include/debug/renesas-scif.S
diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
deleted file mode 100644
index 23e8d146dc16..000000000000
--- a/arch/arm/configs/kzm9g_defconfig
+++ /dev/null
@@ -1,154 +0,0 @@
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE_LEGACY=y
-CONFIG_ARCH_SH73A0=y
-CONFIG_MACH_KZM9G=y
-CONFIG_MEMORY_START=0x41000000
-CONFIG_MEMORY_SIZE=0x1f000000
-CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SMP=y
-CONFIG_SCHED_MC=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_KEXEC=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_SH_IRDA=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_SPARSEKMAP=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ST1232=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_ADXL34X=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=9
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_GPIO_PCF857X=y
-# CONFIG_HWMON is not set
-CONFIG_MFD_AS3711=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_AS3711=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_BACKLIGHT_AS3711=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_FB_SH_MOBILE_MERAM=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_SH4_FSI=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_R8A66597_HCD=y
-CONFIG_USB_RENESAS_USBHS=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_RENESAS_USBHS_UDC=y
-CONFIG_USB_ETH=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_DMADEVICES=y
-CONFIG_SH_DMAE=y
-CONFIG_ASYNC_TX_DMA=y
-CONFIG_STAGING=y
-CONFIG_IIO=y
-CONFIG_AK8975=y
-# CONFIG_DNOTIFY is not set
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRC16=y
-- 
2.1.4

[PATCH 06/16] ARM: shmobile: Drop sh73a0-kzm9g.dtb for legacy builds

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The legacy board code for KZM-A9-GT has been removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/Makefile | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 246473a244f6..b1d0a12a94ef 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -504,8 +504,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
 	r8a7778-bockw-reference.dtb \
-	r8a7779-marzen.dtb \
-	sh73a0-kzm9g.dtb
+	r8a7779-marzen.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	emev2-kzm9d.dtb \
 	r7s72100-genmai.dtb \
-- 
2.1.4

[PATCH 06/16] ARM: shmobile: Drop sh73a0-kzm9g.dtb for legacy builds

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The legacy board code for KZM-A9-GT has been removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/Makefile | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 246473a244f6..b1d0a12a94ef 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -504,8 +504,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
 	r8a7778-bockw-reference.dtb \
-	r8a7779-marzen.dtb \
-	sh73a0-kzm9g.dtb
+	r8a7779-marzen.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	emev2-kzm9d.dtb \
 	r7s72100-genmai.dtb \
-- 
2.1.4

[PATCH 07/16] ARM: shmobile: Remove legacy SoC code for SH-Mobile AG5

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last user of the SH-Mobile AG5 (sh73a0) legacy SoC code was the
KZM-A9-GT legacy board code, which has been removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig        |   9 -
 arch/arm/mach-shmobile/Makefile       |   3 +-
 arch/arm/mach-shmobile/clock-sh73a0.c | 752 ----------------------------------
 arch/arm/mach-shmobile/pm-sh73a0.c    |  32 --
 arch/arm/mach-shmobile/setup-sh73a0.c | 739 +--------------------------------
 arch/arm/mach-shmobile/sh73a0.h       |  83 ----
 arch/arm/mach-shmobile/smp-sh73a0.c   |   8 -
 7 files changed, 2 insertions(+), 1624 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/clock-sh73a0.c
 delete mode 100644 arch/arm/mach-shmobile/pm-sh73a0.c

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 3cebc4cbb8ca..8e82ef4abdce 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -103,15 +103,6 @@ if ARCH_SHMOBILE_LEGACY
 
 comment "Renesas ARM SoCs System Type"
 
-config ARCH_SH73A0
-	bool "SH-Mobile AG5 (R8A73A00)"
-	select ARCH_RMOBILE
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-	select I2C
-	select SH_INTC
-	select RENESAS_INTC_IRQPIN
-
 config ARCH_R8A7740
 	bool "R-Mobile A1 (R8A77400)"
 	select ARCH_RMOBILE
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index a4d7f5734e91..28e0f05a8577 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -6,7 +6,7 @@
 obj-y				:= timer.o console.o
 
 # CPU objects
-obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o pm-sh73a0.o
+obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o
 obj-$(CONFIG_ARCH_R8A73A4)	+= setup-r8a73a4.o
 obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o pm-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7778)	+= setup-r8a7778.o
@@ -20,7 +20,6 @@ obj-$(CONFIG_ARCH_R7S72100)	+= setup-r7s72100.o
 # Clock objects
 ifndef CONFIG_COMMON_CLK
 obj-y				+= clock.o
-obj-$(CONFIG_ARCH_SH73A0)	+= clock-sh73a0.o
 obj-$(CONFIG_ARCH_R8A7740)	+= clock-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7778)	+= clock-r8a7778.o
 obj-$(CONFIG_ARCH_R8A7779)	+= clock-r8a7779.o
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
deleted file mode 100644
index 3855fb024fdb..000000000000
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ /dev/null
@@ -1,752 +0,0 @@
-/*
- * sh73a0 clock framework support
- *
- * Copyright (C) 2010 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include <asm/processor.h>
-#include "clock.h"
-#include "common.h"
-
-#define FRQCRA		IOMEM(0xe6150000)
-#define FRQCRB		IOMEM(0xe6150004)
-#define FRQCRD		IOMEM(0xe61500e4)
-#define VCLKCR1		IOMEM(0xe6150008)
-#define VCLKCR2		IOMEM(0xe615000C)
-#define VCLKCR3		IOMEM(0xe615001C)
-#define ZBCKCR		IOMEM(0xe6150010)
-#define FLCKCR		IOMEM(0xe6150014)
-#define SD0CKCR		IOMEM(0xe6150074)
-#define SD1CKCR		IOMEM(0xe6150078)
-#define SD2CKCR		IOMEM(0xe615007C)
-#define FSIACKCR	IOMEM(0xe6150018)
-#define FSIBCKCR	IOMEM(0xe6150090)
-#define SUBCKCR		IOMEM(0xe6150080)
-#define SPUACKCR	IOMEM(0xe6150084)
-#define SPUVCKCR	IOMEM(0xe6150094)
-#define MSUCKCR		IOMEM(0xe6150088)
-#define HSICKCR		IOMEM(0xe615008C)
-#define MFCK1CR		IOMEM(0xe6150098)
-#define MFCK2CR		IOMEM(0xe615009C)
-#define DSITCKCR	IOMEM(0xe6150060)
-#define DSI0PCKCR	IOMEM(0xe6150064)
-#define DSI1PCKCR	IOMEM(0xe6150068)
-#define DSI0PHYCR	0xe615006C
-#define DSI1PHYCR	0xe6150070
-#define PLLECR		IOMEM(0xe61500d0)
-#define PLL0CR		IOMEM(0xe61500d8)
-#define PLL1CR		IOMEM(0xe6150028)
-#define PLL2CR		IOMEM(0xe615002c)
-#define PLL3CR		IOMEM(0xe61500dc)
-#define SMSTPCR0	IOMEM(0xe6150130)
-#define SMSTPCR1	IOMEM(0xe6150134)
-#define SMSTPCR2	IOMEM(0xe6150138)
-#define SMSTPCR3	IOMEM(0xe615013c)
-#define SMSTPCR4	IOMEM(0xe6150140)
-#define SMSTPCR5	IOMEM(0xe6150144)
-#define CKSCR		IOMEM(0xe61500c0)
-
-/* Fixed 32 KHz root clock from EXTALR pin */
-static struct clk r_clk = {
-	.rate           = 32768,
-};
-
-/*
- * 26MHz default rate for the EXTAL1 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-struct clk sh73a0_extal1_clk = {
-	.rate		= 26000000,
-};
-
-/*
- * 48MHz default rate for the EXTAL2 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-struct clk sh73a0_extal2_clk = {
-	.rate		= 48000000,
-};
-
-static struct sh_clk_ops main_clk_ops = {
-	.recalc		= followparent_recalc,
-};
-
-/* Main clock */
-static struct clk main_clk = {
-	/* .parent wll be set on sh73a0_clock_init() */
-	.ops		= &main_clk_ops,
-};
-
-/* PLL0, PLL1, PLL2, PLL3 */
-static unsigned long pll_recalc(struct clk *clk)
-{
-	unsigned long mult = 1;
-
-	if (__raw_readl(PLLECR) & (1 << clk->enable_bit)) {
-		mult = (((__raw_readl(clk->enable_reg) >> 24) & 0x3f) + 1);
-		/* handle CFG bit for PLL1 and PLL2 */
-		switch (clk->enable_bit) {
-		case 1:
-		case 2:
-			if (__raw_readl(clk->enable_reg) & (1 << 20))
-				mult *= 2;
-		}
-	}
-
-	return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
-	.recalc		= pll_recalc,
-};
-
-static struct clk pll0_clk = {
-	.ops		= &pll_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &main_clk,
-	.enable_reg	= (void __iomem *)PLL0CR,
-	.enable_bit	= 0,
-};
-
-static struct clk pll1_clk = {
-	.ops		= &pll_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &main_clk,
-	.enable_reg	= (void __iomem *)PLL1CR,
-	.enable_bit	= 1,
-};
-
-static struct clk pll2_clk = {
-	.ops		= &pll_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &main_clk,
-	.enable_reg	= (void __iomem *)PLL2CR,
-	.enable_bit	= 2,
-};
-
-static struct clk pll3_clk = {
-	.ops		= &pll_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &main_clk,
-	.enable_reg	= (void __iomem *)PLL3CR,
-	.enable_bit	= 3,
-};
-
-/* A fixed divide block */
-SH_CLK_RATIO(div2,  1, 2);
-SH_CLK_RATIO(div7,  1, 7);
-SH_CLK_RATIO(div13, 1, 13);
-
-SH_FIXED_RATIO_CLK(extal1_div2_clk,	sh73a0_extal1_clk,	div2);
-SH_FIXED_RATIO_CLK(extal2_div2_clk,	sh73a0_extal2_clk,	div2);
-SH_FIXED_RATIO_CLK(main_div2_clk,	main_clk,		div2);
-SH_FIXED_RATIO_CLK(pll1_div2_clk,	pll1_clk,		div2);
-SH_FIXED_RATIO_CLK(pll1_div7_clk,	pll1_clk,		div7);
-SH_FIXED_RATIO_CLK(pll1_div13_clk,	pll1_clk,		div13);
-
-/* External input clock */
-struct clk sh73a0_extcki_clk = {
-};
-
-struct clk sh73a0_extalr_clk = {
-};
-
-static struct clk *main_clks[] = {
-	&r_clk,
-	&sh73a0_extal1_clk,
-	&sh73a0_extal2_clk,
-	&extal1_div2_clk,
-	&extal2_div2_clk,
-	&main_clk,
-	&main_div2_clk,
-	&pll0_clk,
-	&pll1_clk,
-	&pll2_clk,
-	&pll3_clk,
-	&pll1_div2_clk,
-	&pll1_div7_clk,
-	&pll1_div13_clk,
-	&sh73a0_extcki_clk,
-	&sh73a0_extalr_clk,
-};
-
-static int frqcr_kick(void)
-{
-	int i;
-
-	/* set KICK bit in FRQCRB to update hardware setting, check success */
-	__raw_writel(__raw_readl(FRQCRB) | (1 << 31), FRQCRB);
-	for (i = 1000; i; i--)
-		if (__raw_readl(FRQCRB) & (1 << 31))
-			cpu_relax();
-		else
-			return i;
-
-	return -ETIMEDOUT;
-}
-
-static void div4_kick(struct clk *clk)
-{
-	frqcr_kick();
-}
-
-static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
-			  24, 0, 36, 48, 7 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
-	.divisors = divisors,
-	.nr_divisors = ARRAY_SIZE(divisors),
-};
-
-static struct clk_div4_table div4_table = {
-	.div_mult_table = &div4_div_mult_table,
-	.kick = div4_kick,
-};
-
-enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2,
-	DIV4_Z, DIV4_ZX, DIV4_HP, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
-	SH_CLK_DIV4(&pll1_clk, _reg, _bit, _mask, _flags)
-
-static struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I] = DIV4(FRQCRA, 20, 0xdff, CLK_ENABLE_ON_INIT),
-	/*
-	 * ZG clock is dividing PLL0 frequency to supply SGX. Make sure not to
-	 * exceed maximum frequencies of 201.5MHz for VDD_DVFS=1.175 and
-	 * 239.2MHz for VDD_DVFS=1.315V.
-	 */
-	[DIV4_ZG] = SH_CLK_DIV4(&pll0_clk, FRQCRA, 16, 0xd7f, CLK_ENABLE_ON_INIT),
-	[DIV4_M3] = DIV4(FRQCRA, 12, 0x1dff, CLK_ENABLE_ON_INIT),
-	[DIV4_B] = DIV4(FRQCRA, 8, 0xdff, CLK_ENABLE_ON_INIT),
-	[DIV4_M1] = DIV4(FRQCRA, 4, 0x1dff, 0),
-	[DIV4_M2] = DIV4(FRQCRA, 0, 0x1dff, 0),
-	[DIV4_Z] = SH_CLK_DIV4(&pll0_clk, FRQCRB, 24, 0x97f, 0),
-	[DIV4_ZX] = DIV4(FRQCRB, 12, 0xdff, 0),
-	[DIV4_HP] = DIV4(FRQCRB, 4, 0xdff, 0),
-};
-
-static unsigned long twd_recalc(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 4;
-}
-
-static struct sh_clk_ops twd_clk_ops = {
-	.recalc = twd_recalc,
-};
-
-static struct clk twd_clk = {
-	.parent = &div4_clks[DIV4_Z],
-	.ops = &twd_clk_ops,
-};
-
-static struct sh_clk_ops zclk_ops, kicker_ops;
-static const struct sh_clk_ops *div4_clk_ops;
-
-static int zclk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret;
-
-	if (!clk->parent || !__clk_get(clk->parent))
-		return -ENODEV;
-
-	if (readl(FRQCRB) & (1 << 31))
-		return -EBUSY;
-
-	if (rate = clk_get_rate(clk->parent)) {
-		/* 1:1 - switch off divider */
-		__raw_writel(__raw_readl(FRQCRB) & ~(1 << 28), FRQCRB);
-		/* nullify the divider to prepare for the next time */
-		ret = div4_clk_ops->set_rate(clk, rate / 2);
-		if (!ret)
-			ret = frqcr_kick();
-		if (ret > 0)
-			ret = 0;
-	} else {
-		/* Enable the divider */
-		__raw_writel(__raw_readl(FRQCRB) | (1 << 28), FRQCRB);
-
-		ret = frqcr_kick();
-		if (ret >= 0)
-			/*
-			 * set the divider - call the DIV4 method, it will kick
-			 * FRQCRB too
-			 */
-			ret = div4_clk_ops->set_rate(clk, rate);
-		if (ret < 0)
-			goto esetrate;
-	}
-
-esetrate:
-	__clk_put(clk->parent);
-	return ret;
-}
-
-static long zclk_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long div_freq = div4_clk_ops->round_rate(clk, rate),
-		parent_freq = clk_get_rate(clk->parent);
-
-	if (rate > div_freq && abs(parent_freq - rate) < rate - div_freq)
-		return parent_freq;
-
-	return div_freq;
-}
-
-static unsigned long zclk_recalc(struct clk *clk)
-{
-	/*
-	 * Must recalculate frequencies in case PLL0 has been changed, even if
-	 * the divisor is unused ATM!
-	 */
-	unsigned long div_freq = div4_clk_ops->recalc(clk);
-
-	if (__raw_readl(FRQCRB) & (1 << 28))
-		return div_freq;
-
-	return clk_get_rate(clk->parent);
-}
-
-static int kicker_set_rate(struct clk *clk, unsigned long rate)
-{
-	if (__raw_readl(FRQCRB) & (1 << 31))
-		return -EBUSY;
-
-	return div4_clk_ops->set_rate(clk, rate);
-}
-
-static void div4_clk_extend(void)
-{
-	int i;
-
-	div4_clk_ops = div4_clks[0].ops;
-
-	/* Add a kicker-busy check before changing the rate */
-	kicker_ops = *div4_clk_ops;
-	/* We extend the DIV4 clock with a 1:1 pass-through case */
-	zclk_ops = *div4_clk_ops;
-
-	kicker_ops.set_rate = kicker_set_rate;
-	zclk_ops.set_rate = zclk_set_rate;
-	zclk_ops.round_rate = zclk_round_rate;
-	zclk_ops.recalc = zclk_recalc;
-
-	for (i = 0; i < DIV4_NR; i++)
-		div4_clks[i].ops = i = DIV4_Z ? &zclk_ops : &kicker_ops;
-}
-
-enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_ZB1,
-	DIV6_FLCTL, DIV6_SDHI0, DIV6_SDHI1, DIV6_SDHI2,
-	DIV6_FSIA, DIV6_FSIB, DIV6_SUB,
-	DIV6_SPUA, DIV6_SPUV, DIV6_MSU,
-	DIV6_HSI,  DIV6_MFG1, DIV6_MFG2,
-	DIV6_DSIT, DIV6_DSI0P, DIV6_DSI1P,
-	DIV6_NR };
-
-static struct clk *vck_parent[8] = {
-	[0] = &pll1_div2_clk,
-	[1] = &pll2_clk,
-	[2] = &sh73a0_extcki_clk,
-	[3] = &sh73a0_extal2_clk,
-	[4] = &main_div2_clk,
-	[5] = &sh73a0_extalr_clk,
-	[6] = &main_clk,
-};
-
-static struct clk *pll_parent[4] = {
-	[0] = &pll1_div2_clk,
-	[1] = &pll2_clk,
-	[2] = &pll1_div13_clk,
-};
-
-static struct clk *hsi_parent[4] = {
-	[0] = &pll1_div2_clk,
-	[1] = &pll2_clk,
-	[2] = &pll1_div7_clk,
-};
-
-static struct clk *pll_extal2_parent[] = {
-	[0] = &pll1_div2_clk,
-	[1] = &pll2_clk,
-	[2] = &sh73a0_extal2_clk,
-	[3] = &sh73a0_extal2_clk,
-};
-
-static struct clk *dsi_parent[8] = {
-	[0] = &pll1_div2_clk,
-	[1] = &pll2_clk,
-	[2] = &main_clk,
-	[3] = &sh73a0_extal2_clk,
-	[4] = &sh73a0_extcki_clk,
-};
-
-static struct clk div6_clks[DIV6_NR] = {
-	[DIV6_VCK1] = SH_CLK_DIV6_EXT(VCLKCR1, 0,
-			vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
-	[DIV6_VCK2] = SH_CLK_DIV6_EXT(VCLKCR2, 0,
-			vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
-	[DIV6_VCK3] = SH_CLK_DIV6_EXT(VCLKCR3, 0,
-			vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
-	[DIV6_ZB1] = SH_CLK_DIV6_EXT(ZBCKCR, CLK_ENABLE_ON_INIT,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_FLCTL] = SH_CLK_DIV6_EXT(FLCKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_SDHI0] = SH_CLK_DIV6_EXT(SD0CKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 6, 2),
-	[DIV6_SDHI1] = SH_CLK_DIV6_EXT(SD1CKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 6, 2),
-	[DIV6_SDHI2] = SH_CLK_DIV6_EXT(SD2CKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 6, 2),
-	[DIV6_FSIA] = SH_CLK_DIV6_EXT(FSIACKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 6, 1),
-	[DIV6_FSIB] = SH_CLK_DIV6_EXT(FSIBCKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 6, 1),
-	[DIV6_SUB] = SH_CLK_DIV6_EXT(SUBCKCR, 0,
-			pll_extal2_parent, ARRAY_SIZE(pll_extal2_parent), 6, 2),
-	[DIV6_SPUA] = SH_CLK_DIV6_EXT(SPUACKCR, 0,
-			pll_extal2_parent, ARRAY_SIZE(pll_extal2_parent), 6, 2),
-	[DIV6_SPUV] = SH_CLK_DIV6_EXT(SPUVCKCR, 0,
-			pll_extal2_parent, ARRAY_SIZE(pll_extal2_parent), 6, 2),
-	[DIV6_MSU] = SH_CLK_DIV6_EXT(MSUCKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_HSI] = SH_CLK_DIV6_EXT(HSICKCR, 0,
-			hsi_parent, ARRAY_SIZE(hsi_parent), 6, 2),
-	[DIV6_MFG1] = SH_CLK_DIV6_EXT(MFCK1CR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_MFG2] = SH_CLK_DIV6_EXT(MFCK2CR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_DSIT] = SH_CLK_DIV6_EXT(DSITCKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_DSI0P] = SH_CLK_DIV6_EXT(DSI0PCKCR, 0,
-			dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
-	[DIV6_DSI1P] = SH_CLK_DIV6_EXT(DSI1PCKCR, 0,
-			dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
-};
-
-/* DSI DIV */
-static unsigned long dsiphy_recalc(struct clk *clk)
-{
-	u32 value;
-
-	value = __raw_readl(clk->mapping->base);
-
-	/* FIXME */
-	if (!(value & 0x000B8000))
-		return clk->parent->rate;
-
-	value &= 0x3f;
-	value += 1;
-
-	if ((value < 12) ||
-	    (value > 33)) {
-		pr_err("DSIPHY has wrong value (%d)", value);
-		return 0;
-	}
-
-	return clk->parent->rate / value;
-}
-
-static long dsiphy_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk_rate_mult_range_round(clk, 12, 33, rate);
-}
-
-static void dsiphy_disable(struct clk *clk)
-{
-	u32 value;
-
-	value = __raw_readl(clk->mapping->base);
-	value &= ~0x000B8000;
-
-	__raw_writel(value , clk->mapping->base);
-}
-
-static int dsiphy_enable(struct clk *clk)
-{
-	u32 value;
-	int multi;
-
-	value = __raw_readl(clk->mapping->base);
-	multi = (value & 0x3f) + 1;
-
-	if ((multi < 12) || (multi > 33))
-		return -EIO;
-
-	__raw_writel(value | 0x000B8000, clk->mapping->base);
-
-	return 0;
-}
-
-static int dsiphy_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 value;
-	int idx;
-
-	idx = rate / clk->parent->rate;
-	if ((idx < 12) || (idx > 33))
-		return -EINVAL;
-
-	idx += -1;
-
-	value = __raw_readl(clk->mapping->base);
-	value = (value & ~0x3f) + idx;
-
-	__raw_writel(value, clk->mapping->base);
-
-	return 0;
-}
-
-static struct sh_clk_ops dsiphy_clk_ops = {
-	.recalc		= dsiphy_recalc,
-	.round_rate	= dsiphy_round_rate,
-	.set_rate	= dsiphy_set_rate,
-	.enable		= dsiphy_enable,
-	.disable	= dsiphy_disable,
-};
-
-static struct clk_mapping dsi0phy_clk_mapping = {
-	.phys	= DSI0PHYCR,
-	.len	= 4,
-};
-
-static struct clk_mapping dsi1phy_clk_mapping = {
-	.phys	= DSI1PHYCR,
-	.len	= 4,
-};
-
-static struct clk dsi0phy_clk = {
-	.ops		= &dsiphy_clk_ops,
-	.parent		= &div6_clks[DIV6_DSI0P], /* late install */
-	.mapping	= &dsi0phy_clk_mapping,
-};
-
-static struct clk dsi1phy_clk = {
-	.ops		= &dsiphy_clk_ops,
-	.parent		= &div6_clks[DIV6_DSI1P], /* late install */
-	.mapping	= &dsi1phy_clk_mapping,
-};
-
-static struct clk *late_main_clks[] = {
-	&dsi0phy_clk,
-	&dsi1phy_clk,
-	&twd_clk,
-};
-
-enum { MSTP001,
-	MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP112, MSTP100,
-	MSTP219, MSTP218, MSTP217,
-	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
-	MSTP331, MSTP329, MSTP328, MSTP325, MSTP323, MSTP322,
-	MSTP314, MSTP313, MSTP312, MSTP311,
-	MSTP304, MSTP303, MSTP302, MSTP301, MSTP300,
-	MSTP411, MSTP410, MSTP403,
-	MSTP508,
-	MSTP_NR };
-
-#define MSTP(_parent, _reg, _bit, _flags) \
-	SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
-
-static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP001] = MSTP(&div4_clks[DIV4_HP], SMSTPCR0, 1, 0), /* IIC2 */
-	[MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* CEU1 */
-	[MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* CSI2-RX1 */
-	[MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU0 */
-	[MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2-RX0 */
-	[MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
-	[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX0 */
-	[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
-	[MSTP112] = MSTP(&div4_clks[DIV4_ZG], SMSTPCR1, 12, 0), /* SGX */
-	[MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
-	[MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */
-	[MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */
-	[MSTP217] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* MP-DMAC */
-	[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
-	[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
-	[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
-	[MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
-	[MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
-	[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
-	[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
-	[MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */
-	[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
-	[MSTP328] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 28, 0), /*FSI*/
-	[MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */
-	[MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
-	[MSTP322] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 22, 0), /* USB */
-	[MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */
-	[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
-	[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
-	[MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */
-	[MSTP304] = MSTP(&main_div2_clk, SMSTPCR3, 4, 0), /* TPU0 */
-	[MSTP303] = MSTP(&main_div2_clk, SMSTPCR3, 3, 0), /* TPU1 */
-	[MSTP302] = MSTP(&main_div2_clk, SMSTPCR3, 2, 0), /* TPU2 */
-	[MSTP301] = MSTP(&main_div2_clk, SMSTPCR3, 1, 0), /* TPU3 */
-	[MSTP300] = MSTP(&main_div2_clk, SMSTPCR3, 0, 0), /* TPU4 */
-	[MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */
-	[MSTP410] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */
-	[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
-	[MSTP508] = MSTP(&div4_clks[DIV4_HP], SMSTPCR5, 8, 0), /* INTCA0 */
-};
-
-/* The lookups structure below includes duplicate entries for some clocks
- * with alternate names.
- * - The traditional name used when a device is initialised with platform data
- * - The name used when a device is initialised using device tree
- * The longer-term aim is to remove these duplicates, and indeed the
- * lookups table entirely, by describing clocks using device tree.
- */
-static struct clk_lookup lookups[] = {
-	/* main clocks */
-	CLKDEV_CON_ID("r_clk", &r_clk),
-	CLKDEV_DEV_ID("smp_twd", &twd_clk), /* smp_twd */
-
-	/* DIV4 clocks */
-	CLKDEV_DEV_ID("cpu0", &div4_clks[DIV4_Z]),
-
-	/* DIV6 clocks */
-	CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
-	CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
-	CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
-	CLKDEV_CON_ID("sdhi0_clk", &div6_clks[DIV6_SDHI0]),
-	CLKDEV_CON_ID("sdhi1_clk", &div6_clks[DIV6_SDHI1]),
-	CLKDEV_CON_ID("sdhi2_clk", &div6_clks[DIV6_SDHI2]),
-
-	/* MSTP32 clocks */
-	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
-	CLKDEV_DEV_ID("e6824000.i2c", &mstp_clks[MSTP001]), /* I2C2 */
-	CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP129]), /* CEU1 */
-	CLKDEV_DEV_ID("sh-mobile-csi2.1", &mstp_clks[MSTP128]), /* CSI2-RX1 */
-	CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU0 */
-	CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2-RX0 */
-	CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
-	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
-	CLKDEV_DEV_ID("e6820000.i2c", &mstp_clks[MSTP116]), /* I2C0 */
-	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
-	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
-	CLKDEV_DEV_ID("e6cd0000.serial", &mstp_clks[MSTP219]), /* SCIFA7 */
-	CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */
-	CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* MP-DMAC */
-	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
-	CLKDEV_DEV_ID("e6cb0000.serial", &mstp_clks[MSTP207]), /* SCIFA5 */
-	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
-	CLKDEV_DEV_ID("e6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */
-	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
-	CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]), /* SCIFA0 */
-	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
-	CLKDEV_DEV_ID("e6c50000.serial", &mstp_clks[MSTP203]), /* SCIFA1 */
-	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
-	CLKDEV_DEV_ID("e6c60000.serial", &mstp_clks[MSTP202]), /* SCIFA2 */
-	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
-	CLKDEV_DEV_ID("e6c70000.serial", &mstp_clks[MSTP201]), /* SCIFA3 */
-	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
-	CLKDEV_DEV_ID("e6c80000.serial", &mstp_clks[MSTP200]), /* SCIFA4 */
-	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
-	CLKDEV_DEV_ID("e6cc0000.serial", &mstp_clks[MSTP331]), /* SCIFA6 */
-	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */
-	CLKDEV_DEV_ID("ec230000.sound", &mstp_clks[MSTP328]), /* FSI */
-	CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
-	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
-	CLKDEV_DEV_ID("e6822000.i2c", &mstp_clks[MSTP323]), /* I2C1 */
-	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP322]), /* USB */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
-	CLKDEV_DEV_ID("ee100000.sd", &mstp_clks[MSTP314]), /* SDHI0 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
-	CLKDEV_DEV_ID("ee120000.sd", &mstp_clks[MSTP313]), /* SDHI1 */
-	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
-	CLKDEV_DEV_ID("e6bd0000.mmc", &mstp_clks[MSTP312]), /* MMCIF0 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
-	CLKDEV_DEV_ID("ee140000.sd", &mstp_clks[MSTP311]), /* SDHI2 */
-	CLKDEV_DEV_ID("renesas-tpu-pwm.0", &mstp_clks[MSTP304]), /* TPU0 */
-	CLKDEV_DEV_ID("renesas-tpu-pwm.1", &mstp_clks[MSTP303]), /* TPU1 */
-	CLKDEV_DEV_ID("renesas-tpu-pwm.2", &mstp_clks[MSTP302]), /* TPU2 */
-	CLKDEV_DEV_ID("renesas-tpu-pwm.3", &mstp_clks[MSTP301]), /* TPU3 */
-	CLKDEV_DEV_ID("renesas-tpu-pwm.4", &mstp_clks[MSTP300]), /* TPU4 */
-	CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */
-	CLKDEV_DEV_ID("e6826000.i2c", &mstp_clks[MSTP411]), /* I2C3 */
-	CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */
-	CLKDEV_DEV_ID("e6828000.i2c", &mstp_clks[MSTP410]), /* I2C4 */
-	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
-	CLKDEV_DEV_ID("renesas_intc_irqpin.0",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("e6900000.irqpin",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("renesas_intc_irqpin.1",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("e6900004.irqpin",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("renesas_intc_irqpin.2",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("e6900008.irqpin",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("renesas_intc_irqpin.3",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("e690000c.irqpin",	&mstp_clks[MSTP508]), /* INTCA0 */
-
-	/* ICK */
-	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
-	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
-	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
-	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
-	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
-	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
-	CLKDEV_ICK_ID("fck", "sh-cmt-48.1", &mstp_clks[MSTP329]), /* CMT1 */
-	CLKDEV_ICK_ID("fck", "e6138000.timer", &mstp_clks[MSTP329]), /* CMT1 */
-	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP125]), /* TMU0 */
-};
-
-void __init sh73a0_clock_init(void)
-{
-	int k, ret = 0;
-
-	/* Set SDHI clocks to a known state */
-	__raw_writel(0x108, SD0CKCR);
-	__raw_writel(0x108, SD1CKCR);
-	__raw_writel(0x108, SD2CKCR);
-
-	/* detect main clock parent */
-	switch ((__raw_readl(CKSCR) >> 28) & 0x03) {
-	case 0:
-		main_clk.parent = &sh73a0_extal1_clk;
-		break;
-	case 1:
-		main_clk.parent = &extal1_div2_clk;
-		break;
-	case 2:
-		main_clk.parent = &sh73a0_extal2_clk;
-		break;
-	case 3:
-		main_clk.parent = &extal2_div2_clk;
-		break;
-	}
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	if (!ret) {
-		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-		if (!ret)
-			div4_clk_extend();
-	}
-
-	if (!ret)
-		ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR);
-
-	if (!ret)
-		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
-		ret = clk_register(late_main_clks[k]);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup sh73a0 clocks\n");
-}
diff --git a/arch/arm/mach-shmobile/pm-sh73a0.c b/arch/arm/mach-shmobile/pm-sh73a0.c
deleted file mode 100644
index a7e466817965..000000000000
--- a/arch/arm/mach-shmobile/pm-sh73a0.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * sh73a0 Power management support
- *
- *  Copyright (C) 2012 Bastian Hecht <hechtb+renesas@gmail.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/suspend.h>
-#include "common.h"
-
-#ifdef CONFIG_SUSPEND
-static int sh73a0_enter_suspend(suspend_state_t suspend_state)
-{
-	cpu_do_idle();
-	return 0;
-}
-
-static void sh73a0_suspend_init(void)
-{
-	shmobile_suspend_ops.enter = sh73a0_enter_suspend;
-}
-#else
-static void sh73a0_suspend_init(void) {}
-#endif
-
-void __init sh73a0_pm_init(void)
-{
-	sh73a0_suspend_init();
-}
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index fb2ab7590af8..a1e8e72e25b5 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -18,28 +18,17 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/platform_device.h>
 #include <linux/of_platform.h>
 #include <linux/delay.h>
 #include <linux/input.h>
-#include <linux/i2c/i2c-sh_mobile.h>
 #include <linux/io.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
-#include <linux/platform_data/sh_ipmmu.h>
-#include <linux/platform_data/irq-renesas-intc-irqpin.h>
 
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "common.h"
-#include "dma-register.h"
-#include "intc.h"
-#include "irqs.h"
 #include "sh73a0.h"
 
 static struct map_desc sh73a0_io_desc[] __initdata = {
@@ -54,737 +43,12 @@ static struct map_desc sh73a0_io_desc[] __initdata = {
 	},
 };
 
-void __init sh73a0_map_io(void)
+static void __init sh73a0_map_io(void)
 {
 	debug_ll_io_init();
 	iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc));
 }
 
-/* PFC */
-static struct resource pfc_resources[] __initdata = {
-	DEFINE_RES_MEM(0xe6050000, 0x8000),
-	DEFINE_RES_MEM(0xe605801c, 0x000c),
-};
-
-void __init sh73a0_pinmux_init(void)
-{
-	platform_device_register_simple("pfc-sh73a0", -1, pfc_resources,
-					ARRAY_SIZE(pfc_resources));
-}
-
-/* SCIF */
-#define SH73A0_SCIF(scif_type, index, baseaddr, irq)		\
-static struct plat_sci_port scif##index##_platform_data = {	\
-	.type		= scif_type,				\
-	.flags		= UPF_BOOT_AUTOCONF,			\
-	.scscr		= SCSCR_RE | SCSCR_TE,			\
-};								\
-								\
-static struct resource scif##index##_resources[] = {		\
-	DEFINE_RES_MEM(baseaddr, 0x100),			\
-	DEFINE_RES_IRQ(irq),					\
-};								\
-								\
-static struct platform_device scif##index##_device = {		\
-	.name		= "sh-sci",				\
-	.id		= index,				\
-	.resource	= scif##index##_resources,		\
-	.num_resources	= ARRAY_SIZE(scif##index##_resources),	\
-	.dev		= {					\
-		.platform_data	= &scif##index##_platform_data,	\
-	},							\
-}
-
-SH73A0_SCIF(PORT_SCIFA, 0, 0xe6c40000, gic_spi(72));
-SH73A0_SCIF(PORT_SCIFA, 1, 0xe6c50000, gic_spi(73));
-SH73A0_SCIF(PORT_SCIFA, 2, 0xe6c60000, gic_spi(74));
-SH73A0_SCIF(PORT_SCIFA, 3, 0xe6c70000, gic_spi(75));
-SH73A0_SCIF(PORT_SCIFA, 4, 0xe6c80000, gic_spi(78));
-SH73A0_SCIF(PORT_SCIFA, 5, 0xe6cb0000, gic_spi(79));
-SH73A0_SCIF(PORT_SCIFA, 6, 0xe6cc0000, gic_spi(156));
-SH73A0_SCIF(PORT_SCIFA, 7, 0xe6cd0000, gic_spi(143));
-SH73A0_SCIF(PORT_SCIFB, 8, 0xe6c30000, gic_spi(80));
-
-static struct sh_timer_config cmt1_platform_data = {
-	.channels_mask = 0x3f,
-};
-
-static struct resource cmt1_resources[] = {
-	DEFINE_RES_MEM(0xe6138000, 0x200),
-	DEFINE_RES_IRQ(gic_spi(65)),
-};
-
-static struct platform_device cmt1_device = {
-	.name		= "sh-cmt-48",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &cmt1_platform_data,
-	},
-	.resource	= cmt1_resources,
-	.num_resources	= ARRAY_SIZE(cmt1_resources),
-};
-
-/* TMU */
-static struct sh_timer_config tmu0_platform_data = {
-	.channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
-	DEFINE_RES_MEM(0xfff60000, 0x2c),
-	DEFINE_RES_IRQ(intcs_evt2irq(0xe80)),
-	DEFINE_RES_IRQ(intcs_evt2irq(0xea0)),
-	DEFINE_RES_IRQ(intcs_evt2irq(0xec0)),
-};
-
-static struct platform_device tmu0_device = {
-	.name		= "sh-tmu",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &tmu0_platform_data,
-	},
-	.resource	= tmu0_resources,
-	.num_resources	= ARRAY_SIZE(tmu0_resources),
-};
-
-static struct resource i2c0_resources[] = {
-	[0] = DEFINE_RES_MEM(0xe6820000, 0x426),
-	[1] = {
-		.start	= gic_spi(167),
-		.end	= gic_spi(170),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c1_resources[] = {
-	[0] = DEFINE_RES_MEM(0xe6822000, 0x426),
-	[1] = {
-		.start	= gic_spi(51),
-		.end	= gic_spi(54),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c2_resources[] = {
-	[0] = DEFINE_RES_MEM(0xe6824000, 0x426),
-	[1] = {
-		.start	= gic_spi(171),
-		.end	= gic_spi(174),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c3_resources[] = {
-	[0] = DEFINE_RES_MEM(0xe6826000, 0x426),
-	[1] = {
-		.start	= gic_spi(183),
-		.end	= gic_spi(186),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c4_resources[] = {
-	[0] = DEFINE_RES_MEM(0xe6828000, 0x426),
-	[1] = {
-		.start	= gic_spi(187),
-		.end	= gic_spi(190),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct i2c_sh_mobile_platform_data i2c_platform_data = {
-	.clks_per_count	= 2,
-};
-
-static struct platform_device i2c0_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 0,
-	.resource	= i2c0_resources,
-	.num_resources	= ARRAY_SIZE(i2c0_resources),
-	.dev		= {
-		.platform_data	= &i2c_platform_data,
-	},
-};
-
-static struct platform_device i2c1_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 1,
-	.resource	= i2c1_resources,
-	.num_resources	= ARRAY_SIZE(i2c1_resources),
-	.dev		= {
-		.platform_data	= &i2c_platform_data,
-	},
-};
-
-static struct platform_device i2c2_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 2,
-	.resource	= i2c2_resources,
-	.num_resources	= ARRAY_SIZE(i2c2_resources),
-	.dev		= {
-		.platform_data	= &i2c_platform_data,
-	},
-};
-
-static struct platform_device i2c3_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 3,
-	.resource	= i2c3_resources,
-	.num_resources	= ARRAY_SIZE(i2c3_resources),
-	.dev		= {
-		.platform_data	= &i2c_platform_data,
-	},
-};
-
-static struct platform_device i2c4_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 4,
-	.resource	= i2c4_resources,
-	.num_resources	= ARRAY_SIZE(i2c4_resources),
-	.dev		= {
-		.platform_data	= &i2c_platform_data,
-	},
-};
-
-static const struct sh_dmae_slave_config sh73a0_dmae_slaves[] = {
-	{
-		.slave_id	= SHDMA_SLAVE_SCIF0_TX,
-		.addr		= 0xe6c40020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x21,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF0_RX,
-		.addr		= 0xe6c40024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x22,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF1_TX,
-		.addr		= 0xe6c50020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x25,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF1_RX,
-		.addr		= 0xe6c50024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x26,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF2_TX,
-		.addr		= 0xe6c60020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x29,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF2_RX,
-		.addr		= 0xe6c60024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x2a,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF3_TX,
-		.addr		= 0xe6c70020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x2d,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF3_RX,
-		.addr		= 0xe6c70024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x2e,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF4_TX,
-		.addr		= 0xe6c80020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x39,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF4_RX,
-		.addr		= 0xe6c80024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x3a,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF5_TX,
-		.addr		= 0xe6cb0020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x35,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF5_RX,
-		.addr		= 0xe6cb0024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x36,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF6_TX,
-		.addr		= 0xe6cc0020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x1d,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF6_RX,
-		.addr		= 0xe6cc0024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x1e,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF7_TX,
-		.addr		= 0xe6cd0020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x19,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF7_RX,
-		.addr		= 0xe6cd0024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x1a,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF8_TX,
-		.addr		= 0xe6c30040,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x3d,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF8_RX,
-		.addr		= 0xe6c30060,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x3e,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI0_TX,
-		.addr		= 0xee100030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc1,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI0_RX,
-		.addr		= 0xee100030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc2,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI1_TX,
-		.addr		= 0xee120030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc9,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI1_RX,
-		.addr		= 0xee120030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xca,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI2_TX,
-		.addr		= 0xee140030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xcd,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI2_RX,
-		.addr		= 0xee140030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xce,
-	}, {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-		.addr		= 0xe6bd0034,
-		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd1,
-	}, {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-		.addr		= 0xe6bd0034,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd2,
-	},
-};
-
-#define DMAE_CHANNEL(_offset)					\
-	{							\
-		.offset         = _offset - 0x20,		\
-		.dmars          = _offset - 0x20 + 0x40,	\
-	}
-
-static const struct sh_dmae_channel sh73a0_dmae_channels[] = {
-	DMAE_CHANNEL(0x8000),
-	DMAE_CHANNEL(0x8080),
-	DMAE_CHANNEL(0x8100),
-	DMAE_CHANNEL(0x8180),
-	DMAE_CHANNEL(0x8200),
-	DMAE_CHANNEL(0x8280),
-	DMAE_CHANNEL(0x8300),
-	DMAE_CHANNEL(0x8380),
-	DMAE_CHANNEL(0x8400),
-	DMAE_CHANNEL(0x8480),
-	DMAE_CHANNEL(0x8500),
-	DMAE_CHANNEL(0x8580),
-	DMAE_CHANNEL(0x8600),
-	DMAE_CHANNEL(0x8680),
-	DMAE_CHANNEL(0x8700),
-	DMAE_CHANNEL(0x8780),
-	DMAE_CHANNEL(0x8800),
-	DMAE_CHANNEL(0x8880),
-	DMAE_CHANNEL(0x8900),
-	DMAE_CHANNEL(0x8980),
-};
-
-static struct sh_dmae_pdata sh73a0_dmae_platform_data = {
-	.slave          = sh73a0_dmae_slaves,
-	.slave_num      = ARRAY_SIZE(sh73a0_dmae_slaves),
-	.channel        = sh73a0_dmae_channels,
-	.channel_num    = ARRAY_SIZE(sh73a0_dmae_channels),
-	.ts_low_shift   = TS_LOW_SHIFT,
-	.ts_low_mask    = TS_LOW_BIT << TS_LOW_SHIFT,
-	.ts_high_shift  = TS_HI_SHIFT,
-	.ts_high_mask   = TS_HI_BIT << TS_HI_SHIFT,
-	.ts_shift       = dma_ts_shift,
-	.ts_shift_num   = ARRAY_SIZE(dma_ts_shift),
-	.dmaor_init     = DMAOR_DME,
-};
-
-static struct resource sh73a0_dmae_resources[] = {
-	DEFINE_RES_MEM(0xfe000020, 0x89e0),
-	{
-		.name	= "error_irq",
-		.start  = gic_spi(129),
-		.end    = gic_spi(129),
-		.flags  = IORESOURCE_IRQ,
-	},
-	{
-		/* IRQ for channels 0-19 */
-		.start  = gic_spi(109),
-		.end    = gic_spi(128),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dma0_device = {
-	.name		= "sh-dma-engine",
-	.id		= 0,
-	.resource	= sh73a0_dmae_resources,
-	.num_resources	= ARRAY_SIZE(sh73a0_dmae_resources),
-	.dev		= {
-		.platform_data	= &sh73a0_dmae_platform_data,
-	},
-};
-
-/* MPDMAC */
-static const struct sh_dmae_slave_config sh73a0_mpdma_slaves[] = {
-	{
-		.slave_id	= SHDMA_SLAVE_FSI2A_RX,
-		.addr		= 0xec230020,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd6, /* CHECK ME */
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSI2A_TX,
-		.addr		= 0xec230024,
-		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd5, /* CHECK ME */
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSI2C_RX,
-		.addr		= 0xec230060,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xda, /* CHECK ME */
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSI2C_TX,
-		.addr		= 0xec230064,
-		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd9, /* CHECK ME */
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSI2B_RX,
-		.addr		= 0xec240020,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0x8e, /* CHECK ME */
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSI2B_TX,
-		.addr		= 0xec240024,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0x8d, /* CHECK ME */
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSI2D_RX,
-		.addr		=  0xec240060,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0x9a, /* CHECK ME */
-	},
-};
-
-#define MPDMA_CHANNEL(a, b, c)			\
-{						\
-	.offset		= a,			\
-	.dmars		= b,			\
-	.dmars_bit	= c,			\
-	.chclr_offset	= (0x220 - 0x20) + a	\
-}
-
-static const struct sh_dmae_channel sh73a0_mpdma_channels[] = {
-	MPDMA_CHANNEL(0x00, 0, 0),
-	MPDMA_CHANNEL(0x10, 0, 8),
-	MPDMA_CHANNEL(0x20, 4, 0),
-	MPDMA_CHANNEL(0x30, 4, 8),
-	MPDMA_CHANNEL(0x50, 8, 0),
-	MPDMA_CHANNEL(0x70, 8, 8),
-};
-
-static struct sh_dmae_pdata sh73a0_mpdma_platform_data = {
-	.slave		= sh73a0_mpdma_slaves,
-	.slave_num	= ARRAY_SIZE(sh73a0_mpdma_slaves),
-	.channel	= sh73a0_mpdma_channels,
-	.channel_num	= ARRAY_SIZE(sh73a0_mpdma_channels),
-	.ts_low_shift	= TS_LOW_SHIFT,
-	.ts_low_mask	= TS_LOW_BIT << TS_LOW_SHIFT,
-	.ts_high_shift	= TS_HI_SHIFT,
-	.ts_high_mask	= TS_HI_BIT << TS_HI_SHIFT,
-	.ts_shift	= dma_ts_shift,
-	.ts_shift_num	= ARRAY_SIZE(dma_ts_shift),
-	.dmaor_init	= DMAOR_DME,
-	.chclr_present	= 1,
-};
-
-/* Resource order important! */
-static struct resource sh73a0_mpdma_resources[] = {
-	/* Channel registers and DMAOR */
-	DEFINE_RES_MEM(0xec618020, 0x270),
-	/* DMARSx */
-	DEFINE_RES_MEM(0xec619000, 0xc),
-	{
-		.name	= "error_irq",
-		.start	= gic_spi(181),
-		.end	= gic_spi(181),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		/* IRQ for channels 0-5 */
-		.start	= gic_spi(175),
-		.end	= gic_spi(180),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mpdma0_device = {
-	.name		= "sh-dma-engine",
-	.id		= 1,
-	.resource	= sh73a0_mpdma_resources,
-	.num_resources	= ARRAY_SIZE(sh73a0_mpdma_resources),
-	.dev		= {
-		.platform_data	= &sh73a0_mpdma_platform_data,
-	},
-};
-
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start	= gic_spi(55),
-		.end	= gic_spi(55),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= gic_spi(56),
-		.end	= gic_spi(56),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.name		= "armv7-pmu",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pmu_resources),
-	.resource	= pmu_resources,
-};
-
-/* an IPMMU module for ICB */
-static struct resource ipmmu_resources[] = {
-	DEFINE_RES_MEM(0xfe951000, 0x100),
-};
-
-static const char * const ipmmu_dev_names[] = {
-	"sh_mobile_lcdc_fb.0",
-};
-
-static struct shmobile_ipmmu_platform_data ipmmu_platform_data = {
-	.dev_names = ipmmu_dev_names,
-	.num_dev_names = ARRAY_SIZE(ipmmu_dev_names),
-};
-
-static struct platform_device ipmmu_device = {
-	.name           = "ipmmu",
-	.id             = -1,
-	.dev = {
-		.platform_data = &ipmmu_platform_data,
-	},
-	.resource       = ipmmu_resources,
-	.num_resources  = ARRAY_SIZE(ipmmu_resources),
-};
-
-static struct renesas_intc_irqpin_config irqpin0_platform_data = {
-	.irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */
-	.control_parent = true,
-};
-
-static struct resource irqpin0_resources[] = {
-	DEFINE_RES_MEM(0xe6900000, 4), /* ICR1A */
-	DEFINE_RES_MEM(0xe6900010, 4), /* INTPRI00A */
-	DEFINE_RES_MEM(0xe6900020, 1), /* INTREQ00A */
-	DEFINE_RES_MEM(0xe6900040, 1), /* INTMSK00A */
-	DEFINE_RES_MEM(0xe6900060, 1), /* INTMSKCLR00A */
-	DEFINE_RES_IRQ(gic_spi(1)), /* IRQ0 */
-	DEFINE_RES_IRQ(gic_spi(2)), /* IRQ1 */
-	DEFINE_RES_IRQ(gic_spi(3)), /* IRQ2 */
-	DEFINE_RES_IRQ(gic_spi(4)), /* IRQ3 */
-	DEFINE_RES_IRQ(gic_spi(5)), /* IRQ4 */
-	DEFINE_RES_IRQ(gic_spi(6)), /* IRQ5 */
-	DEFINE_RES_IRQ(gic_spi(7)), /* IRQ6 */
-	DEFINE_RES_IRQ(gic_spi(8)), /* IRQ7 */
-};
-
-static struct platform_device irqpin0_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 0,
-	.resource	= irqpin0_resources,
-	.num_resources	= ARRAY_SIZE(irqpin0_resources),
-	.dev		= {
-		.platform_data	= &irqpin0_platform_data,
-	},
-};
-
-static struct renesas_intc_irqpin_config irqpin1_platform_data = {
-	.irq_base = irq_pin(8), /* IRQ8 -> IRQ15 */
-	.control_parent = true, /* Disable spurious IRQ10 */
-};
-
-static struct resource irqpin1_resources[] = {
-	DEFINE_RES_MEM(0xe6900004, 4), /* ICR2A */
-	DEFINE_RES_MEM(0xe6900014, 4), /* INTPRI10A */
-	DEFINE_RES_MEM(0xe6900024, 1), /* INTREQ10A */
-	DEFINE_RES_MEM(0xe6900044, 1), /* INTMSK10A */
-	DEFINE_RES_MEM(0xe6900064, 1), /* INTMSKCLR10A */
-	DEFINE_RES_IRQ(gic_spi(9)), /* IRQ8 */
-	DEFINE_RES_IRQ(gic_spi(10)), /* IRQ9 */
-	DEFINE_RES_IRQ(gic_spi(11)), /* IRQ10 */
-	DEFINE_RES_IRQ(gic_spi(12)), /* IRQ11 */
-	DEFINE_RES_IRQ(gic_spi(13)), /* IRQ12 */
-	DEFINE_RES_IRQ(gic_spi(14)), /* IRQ13 */
-	DEFINE_RES_IRQ(gic_spi(15)), /* IRQ14 */
-	DEFINE_RES_IRQ(gic_spi(16)), /* IRQ15 */
-};
-
-static struct platform_device irqpin1_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 1,
-	.resource	= irqpin1_resources,
-	.num_resources	= ARRAY_SIZE(irqpin1_resources),
-	.dev		= {
-		.platform_data	= &irqpin1_platform_data,
-	},
-};
-
-static struct renesas_intc_irqpin_config irqpin2_platform_data = {
-	.irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */
-	.control_parent = true,
-};
-
-static struct resource irqpin2_resources[] = {
-	DEFINE_RES_MEM(0xe6900008, 4), /* ICR3A */
-	DEFINE_RES_MEM(0xe6900018, 4), /* INTPRI20A */
-	DEFINE_RES_MEM(0xe6900028, 1), /* INTREQ20A */
-	DEFINE_RES_MEM(0xe6900048, 1), /* INTMSK20A */
-	DEFINE_RES_MEM(0xe6900068, 1), /* INTMSKCLR20A */
-	DEFINE_RES_IRQ(gic_spi(17)), /* IRQ16 */
-	DEFINE_RES_IRQ(gic_spi(18)), /* IRQ17 */
-	DEFINE_RES_IRQ(gic_spi(19)), /* IRQ18 */
-	DEFINE_RES_IRQ(gic_spi(20)), /* IRQ19 */
-	DEFINE_RES_IRQ(gic_spi(21)), /* IRQ20 */
-	DEFINE_RES_IRQ(gic_spi(22)), /* IRQ21 */
-	DEFINE_RES_IRQ(gic_spi(23)), /* IRQ22 */
-	DEFINE_RES_IRQ(gic_spi(24)), /* IRQ23 */
-};
-
-static struct platform_device irqpin2_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 2,
-	.resource	= irqpin2_resources,
-	.num_resources	= ARRAY_SIZE(irqpin2_resources),
-	.dev		= {
-		.platform_data	= &irqpin2_platform_data,
-	},
-};
-
-static struct renesas_intc_irqpin_config irqpin3_platform_data = {
-	.irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */
-	.control_parent = true,
-};
-
-static struct resource irqpin3_resources[] = {
-	DEFINE_RES_MEM(0xe690000c, 4), /* ICR4A */
-	DEFINE_RES_MEM(0xe690001c, 4), /* INTPRI30A */
-	DEFINE_RES_MEM(0xe690002c, 1), /* INTREQ30A */
-	DEFINE_RES_MEM(0xe690004c, 1), /* INTMSK30A */
-	DEFINE_RES_MEM(0xe690006c, 1), /* INTMSKCLR30A */
-	DEFINE_RES_IRQ(gic_spi(25)), /* IRQ24 */
-	DEFINE_RES_IRQ(gic_spi(26)), /* IRQ25 */
-	DEFINE_RES_IRQ(gic_spi(27)), /* IRQ26 */
-	DEFINE_RES_IRQ(gic_spi(28)), /* IRQ27 */
-	DEFINE_RES_IRQ(gic_spi(29)), /* IRQ28 */
-	DEFINE_RES_IRQ(gic_spi(30)), /* IRQ29 */
-	DEFINE_RES_IRQ(gic_spi(31)), /* IRQ30 */
-	DEFINE_RES_IRQ(gic_spi(32)), /* IRQ31 */
-};
-
-static struct platform_device irqpin3_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 3,
-	.resource	= irqpin3_resources,
-	.num_resources	= ARRAY_SIZE(irqpin3_resources),
-	.dev		= {
-		.platform_data	= &irqpin3_platform_data,
-	},
-};
-
-static struct platform_device *sh73a0_early_devices[] __initdata = {
-	&scif0_device,
-	&scif1_device,
-	&scif2_device,
-	&scif3_device,
-	&scif4_device,
-	&scif5_device,
-	&scif6_device,
-	&scif7_device,
-	&scif8_device,
-	&tmu0_device,
-	&ipmmu_device,
-	&cmt1_device,
-};
-
-static struct platform_device *sh73a0_late_devices[] __initdata = {
-	&i2c0_device,
-	&i2c1_device,
-	&i2c2_device,
-	&i2c3_device,
-	&i2c4_device,
-	&dma0_device,
-	&mpdma0_device,
-	&pmu_device,
-	&irqpin0_device,
-	&irqpin1_device,
-	&irqpin2_device,
-	&irqpin3_device,
-};
-
-#define SRCR2          IOMEM(0xe61580b0)
-
-void __init sh73a0_add_standard_devices(void)
-{
-	/* Clear software reset bit on SY-DMAC module */
-	__raw_writel(__raw_readl(SRCR2) & ~(1 << 18), SRCR2);
-
-	platform_add_devices(sh73a0_early_devices,
-			    ARRAY_SIZE(sh73a0_early_devices));
-	platform_add_devices(sh73a0_late_devices,
-			    ARRAY_SIZE(sh73a0_late_devices));
-}
-
-/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
-void __init __weak sh73a0_register_twd(void) { }
-
-void __init sh73a0_earlytimer_init(void)
-{
-	shmobile_init_delay();
-#ifndef CONFIG_COMMON_CLK
-	sh73a0_clock_init();
-#endif
-	shmobile_earlytimer_init();
-	sh73a0_register_twd();
-}
-
-void __init sh73a0_add_early_devices(void)
-{
-	early_platform_add_devices(sh73a0_early_devices,
-				   ARRAY_SIZE(sh73a0_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
-}
-
-#ifdef CONFIG_USE_OF
-
 static void __init sh73a0_generic_init(void)
 {
 #ifdef CONFIG_CACHE_L2X0
@@ -807,4 +71,3 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
 	.init_late	= shmobile_init_late,
 	.dt_compat	= sh73a0_boards_compat_dt,
 MACHINE_END
-#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/sh73a0.h b/arch/arm/mach-shmobile/sh73a0.h
index 5a80f18b4fa0..39646806cf64 100644
--- a/arch/arm/mach-shmobile/sh73a0.h
+++ b/arch/arm/mach-shmobile/sh73a0.h
@@ -1,89 +1,6 @@
 #ifndef __ASM_SH73A0_H__
 #define __ASM_SH73A0_H__
 
-/* DMA slave IDs */
-enum {
-	SHDMA_SLAVE_INVALID,
-	SHDMA_SLAVE_SCIF0_TX,
-	SHDMA_SLAVE_SCIF0_RX,
-	SHDMA_SLAVE_SCIF1_TX,
-	SHDMA_SLAVE_SCIF1_RX,
-	SHDMA_SLAVE_SCIF2_TX,
-	SHDMA_SLAVE_SCIF2_RX,
-	SHDMA_SLAVE_SCIF3_TX,
-	SHDMA_SLAVE_SCIF3_RX,
-	SHDMA_SLAVE_SCIF4_TX,
-	SHDMA_SLAVE_SCIF4_RX,
-	SHDMA_SLAVE_SCIF5_TX,
-	SHDMA_SLAVE_SCIF5_RX,
-	SHDMA_SLAVE_SCIF6_TX,
-	SHDMA_SLAVE_SCIF6_RX,
-	SHDMA_SLAVE_SCIF7_TX,
-	SHDMA_SLAVE_SCIF7_RX,
-	SHDMA_SLAVE_SCIF8_TX,
-	SHDMA_SLAVE_SCIF8_RX,
-	SHDMA_SLAVE_SDHI0_TX,
-	SHDMA_SLAVE_SDHI0_RX,
-	SHDMA_SLAVE_SDHI1_TX,
-	SHDMA_SLAVE_SDHI1_RX,
-	SHDMA_SLAVE_SDHI2_TX,
-	SHDMA_SLAVE_SDHI2_RX,
-	SHDMA_SLAVE_MMCIF_TX,
-	SHDMA_SLAVE_MMCIF_RX,
-	SHDMA_SLAVE_FSI2A_TX,
-	SHDMA_SLAVE_FSI2A_RX,
-	SHDMA_SLAVE_FSI2B_TX,
-	SHDMA_SLAVE_FSI2B_RX,
-	SHDMA_SLAVE_FSI2C_TX,
-	SHDMA_SLAVE_FSI2C_RX,
-	SHDMA_SLAVE_FSI2D_RX,
-};
-
-/*
- *		SH73A0 IRQ LOCATION TABLE
- *
- * 416	-----------------------------------------
- *		IRQ0-IRQ15
- * 431	-----------------------------------------
- * ...
- * 448	-----------------------------------------
- *		sh73a0-intcs
- *		sh73a0-intca-irq-pins
- * 680	-----------------------------------------
- * ...
- * 700	-----------------------------------------
- *		sh73a0-pint0
- * 731	-----------------------------------------
- * 732	-----------------------------------------
- *		sh73a0-pint1
- * 739	-----------------------------------------
- * ...
- * 800	-----------------------------------------
- *		IRQ16-IRQ31
- * 815	-----------------------------------------
- * ...
- * 928	-----------------------------------------
- *		sh73a0-intca-irq-pins
- * 943	-----------------------------------------
- */
-
-/* PINT interrupts are located at Linux IRQ 700 and up */
-#define SH73A0_PINT0_IRQ(irq) ((irq) + 700)
-#define SH73A0_PINT1_IRQ(irq) ((irq) + 732)
-
-extern void sh73a0_init_irq(void);
-extern void sh73a0_init_irq_dt(void);
-extern void sh73a0_map_io(void);
-extern void sh73a0_earlytimer_init(void);
-extern void sh73a0_add_early_devices(void);
-extern void sh73a0_add_standard_devices(void);
-extern void sh73a0_clock_init(void);
-extern void sh73a0_pinmux_init(void);
-extern void sh73a0_pm_init(void);
-extern struct clk sh73a0_extal1_clk;
-extern struct clk sh73a0_extal2_clk;
-extern struct clk sh73a0_extcki_clk;
-extern struct clk sh73a0_extalr_clk;
 extern struct smp_operations sh73a0_smp_ops;
 
 #endif /* __ASM_SH73A0_H__ */
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 2106d6b76a06..d03aa11fb46d 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -33,14 +33,6 @@
 
 #define SH73A0_SCU_BASE 0xf0000000
 
-#if defined(CONFIG_HAVE_ARM_TWD) && !defined(CONFIG_ARCH_MULTIPLATFORM)
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, SH73A0_SCU_BASE + 0x600, 29);
-void __init sh73a0_register_twd(void)
-{
-	twd_local_timer_register(&twd_local_timer);
-}
-#endif
-
 static int sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned int lcpu = cpu_logical_map(cpu);
-- 
2.1.4

[PATCH 07/16] ARM: shmobile: Remove legacy SoC code for SH-Mobile AG5

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last user of the SH-Mobile AG5 (sh73a0) legacy SoC code was the
KZM-A9-GT legacy board code, which has been removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig        |   9 -
 arch/arm/mach-shmobile/Makefile       |   3 +-
 arch/arm/mach-shmobile/clock-sh73a0.c | 752 ----------------------------------
 arch/arm/mach-shmobile/pm-sh73a0.c    |  32 --
 arch/arm/mach-shmobile/setup-sh73a0.c | 739 +--------------------------------
 arch/arm/mach-shmobile/sh73a0.h       |  83 ----
 arch/arm/mach-shmobile/smp-sh73a0.c   |   8 -
 7 files changed, 2 insertions(+), 1624 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/clock-sh73a0.c
 delete mode 100644 arch/arm/mach-shmobile/pm-sh73a0.c

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 3cebc4cbb8ca..8e82ef4abdce 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -103,15 +103,6 @@ if ARCH_SHMOBILE_LEGACY
 
 comment "Renesas ARM SoCs System Type"
 
-config ARCH_SH73A0
-	bool "SH-Mobile AG5 (R8A73A00)"
-	select ARCH_RMOBILE
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-	select I2C
-	select SH_INTC
-	select RENESAS_INTC_IRQPIN
-
 config ARCH_R8A7740
 	bool "R-Mobile A1 (R8A77400)"
 	select ARCH_RMOBILE
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index a4d7f5734e91..28e0f05a8577 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -6,7 +6,7 @@
 obj-y				:= timer.o console.o
 
 # CPU objects
-obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o pm-sh73a0.o
+obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o
 obj-$(CONFIG_ARCH_R8A73A4)	+= setup-r8a73a4.o
 obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o pm-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7778)	+= setup-r8a7778.o
@@ -20,7 +20,6 @@ obj-$(CONFIG_ARCH_R7S72100)	+= setup-r7s72100.o
 # Clock objects
 ifndef CONFIG_COMMON_CLK
 obj-y				+= clock.o
-obj-$(CONFIG_ARCH_SH73A0)	+= clock-sh73a0.o
 obj-$(CONFIG_ARCH_R8A7740)	+= clock-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7778)	+= clock-r8a7778.o
 obj-$(CONFIG_ARCH_R8A7779)	+= clock-r8a7779.o
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
deleted file mode 100644
index 3855fb024fdb..000000000000
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ /dev/null
@@ -1,752 +0,0 @@
-/*
- * sh73a0 clock framework support
- *
- * Copyright (C) 2010 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include <asm/processor.h>
-#include "clock.h"
-#include "common.h"
-
-#define FRQCRA		IOMEM(0xe6150000)
-#define FRQCRB		IOMEM(0xe6150004)
-#define FRQCRD		IOMEM(0xe61500e4)
-#define VCLKCR1		IOMEM(0xe6150008)
-#define VCLKCR2		IOMEM(0xe615000C)
-#define VCLKCR3		IOMEM(0xe615001C)
-#define ZBCKCR		IOMEM(0xe6150010)
-#define FLCKCR		IOMEM(0xe6150014)
-#define SD0CKCR		IOMEM(0xe6150074)
-#define SD1CKCR		IOMEM(0xe6150078)
-#define SD2CKCR		IOMEM(0xe615007C)
-#define FSIACKCR	IOMEM(0xe6150018)
-#define FSIBCKCR	IOMEM(0xe6150090)
-#define SUBCKCR		IOMEM(0xe6150080)
-#define SPUACKCR	IOMEM(0xe6150084)
-#define SPUVCKCR	IOMEM(0xe6150094)
-#define MSUCKCR		IOMEM(0xe6150088)
-#define HSICKCR		IOMEM(0xe615008C)
-#define MFCK1CR		IOMEM(0xe6150098)
-#define MFCK2CR		IOMEM(0xe615009C)
-#define DSITCKCR	IOMEM(0xe6150060)
-#define DSI0PCKCR	IOMEM(0xe6150064)
-#define DSI1PCKCR	IOMEM(0xe6150068)
-#define DSI0PHYCR	0xe615006C
-#define DSI1PHYCR	0xe6150070
-#define PLLECR		IOMEM(0xe61500d0)
-#define PLL0CR		IOMEM(0xe61500d8)
-#define PLL1CR		IOMEM(0xe6150028)
-#define PLL2CR		IOMEM(0xe615002c)
-#define PLL3CR		IOMEM(0xe61500dc)
-#define SMSTPCR0	IOMEM(0xe6150130)
-#define SMSTPCR1	IOMEM(0xe6150134)
-#define SMSTPCR2	IOMEM(0xe6150138)
-#define SMSTPCR3	IOMEM(0xe615013c)
-#define SMSTPCR4	IOMEM(0xe6150140)
-#define SMSTPCR5	IOMEM(0xe6150144)
-#define CKSCR		IOMEM(0xe61500c0)
-
-/* Fixed 32 KHz root clock from EXTALR pin */
-static struct clk r_clk = {
-	.rate           = 32768,
-};
-
-/*
- * 26MHz default rate for the EXTAL1 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-struct clk sh73a0_extal1_clk = {
-	.rate		= 26000000,
-};
-
-/*
- * 48MHz default rate for the EXTAL2 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-struct clk sh73a0_extal2_clk = {
-	.rate		= 48000000,
-};
-
-static struct sh_clk_ops main_clk_ops = {
-	.recalc		= followparent_recalc,
-};
-
-/* Main clock */
-static struct clk main_clk = {
-	/* .parent wll be set on sh73a0_clock_init() */
-	.ops		= &main_clk_ops,
-};
-
-/* PLL0, PLL1, PLL2, PLL3 */
-static unsigned long pll_recalc(struct clk *clk)
-{
-	unsigned long mult = 1;
-
-	if (__raw_readl(PLLECR) & (1 << clk->enable_bit)) {
-		mult = (((__raw_readl(clk->enable_reg) >> 24) & 0x3f) + 1);
-		/* handle CFG bit for PLL1 and PLL2 */
-		switch (clk->enable_bit) {
-		case 1:
-		case 2:
-			if (__raw_readl(clk->enable_reg) & (1 << 20))
-				mult *= 2;
-		}
-	}
-
-	return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
-	.recalc		= pll_recalc,
-};
-
-static struct clk pll0_clk = {
-	.ops		= &pll_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &main_clk,
-	.enable_reg	= (void __iomem *)PLL0CR,
-	.enable_bit	= 0,
-};
-
-static struct clk pll1_clk = {
-	.ops		= &pll_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &main_clk,
-	.enable_reg	= (void __iomem *)PLL1CR,
-	.enable_bit	= 1,
-};
-
-static struct clk pll2_clk = {
-	.ops		= &pll_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &main_clk,
-	.enable_reg	= (void __iomem *)PLL2CR,
-	.enable_bit	= 2,
-};
-
-static struct clk pll3_clk = {
-	.ops		= &pll_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &main_clk,
-	.enable_reg	= (void __iomem *)PLL3CR,
-	.enable_bit	= 3,
-};
-
-/* A fixed divide block */
-SH_CLK_RATIO(div2,  1, 2);
-SH_CLK_RATIO(div7,  1, 7);
-SH_CLK_RATIO(div13, 1, 13);
-
-SH_FIXED_RATIO_CLK(extal1_div2_clk,	sh73a0_extal1_clk,	div2);
-SH_FIXED_RATIO_CLK(extal2_div2_clk,	sh73a0_extal2_clk,	div2);
-SH_FIXED_RATIO_CLK(main_div2_clk,	main_clk,		div2);
-SH_FIXED_RATIO_CLK(pll1_div2_clk,	pll1_clk,		div2);
-SH_FIXED_RATIO_CLK(pll1_div7_clk,	pll1_clk,		div7);
-SH_FIXED_RATIO_CLK(pll1_div13_clk,	pll1_clk,		div13);
-
-/* External input clock */
-struct clk sh73a0_extcki_clk = {
-};
-
-struct clk sh73a0_extalr_clk = {
-};
-
-static struct clk *main_clks[] = {
-	&r_clk,
-	&sh73a0_extal1_clk,
-	&sh73a0_extal2_clk,
-	&extal1_div2_clk,
-	&extal2_div2_clk,
-	&main_clk,
-	&main_div2_clk,
-	&pll0_clk,
-	&pll1_clk,
-	&pll2_clk,
-	&pll3_clk,
-	&pll1_div2_clk,
-	&pll1_div7_clk,
-	&pll1_div13_clk,
-	&sh73a0_extcki_clk,
-	&sh73a0_extalr_clk,
-};
-
-static int frqcr_kick(void)
-{
-	int i;
-
-	/* set KICK bit in FRQCRB to update hardware setting, check success */
-	__raw_writel(__raw_readl(FRQCRB) | (1 << 31), FRQCRB);
-	for (i = 1000; i; i--)
-		if (__raw_readl(FRQCRB) & (1 << 31))
-			cpu_relax();
-		else
-			return i;
-
-	return -ETIMEDOUT;
-}
-
-static void div4_kick(struct clk *clk)
-{
-	frqcr_kick();
-}
-
-static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
-			  24, 0, 36, 48, 7 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
-	.divisors = divisors,
-	.nr_divisors = ARRAY_SIZE(divisors),
-};
-
-static struct clk_div4_table div4_table = {
-	.div_mult_table = &div4_div_mult_table,
-	.kick = div4_kick,
-};
-
-enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2,
-	DIV4_Z, DIV4_ZX, DIV4_HP, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
-	SH_CLK_DIV4(&pll1_clk, _reg, _bit, _mask, _flags)
-
-static struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I] = DIV4(FRQCRA, 20, 0xdff, CLK_ENABLE_ON_INIT),
-	/*
-	 * ZG clock is dividing PLL0 frequency to supply SGX. Make sure not to
-	 * exceed maximum frequencies of 201.5MHz for VDD_DVFS=1.175 and
-	 * 239.2MHz for VDD_DVFS=1.315V.
-	 */
-	[DIV4_ZG] = SH_CLK_DIV4(&pll0_clk, FRQCRA, 16, 0xd7f, CLK_ENABLE_ON_INIT),
-	[DIV4_M3] = DIV4(FRQCRA, 12, 0x1dff, CLK_ENABLE_ON_INIT),
-	[DIV4_B] = DIV4(FRQCRA, 8, 0xdff, CLK_ENABLE_ON_INIT),
-	[DIV4_M1] = DIV4(FRQCRA, 4, 0x1dff, 0),
-	[DIV4_M2] = DIV4(FRQCRA, 0, 0x1dff, 0),
-	[DIV4_Z] = SH_CLK_DIV4(&pll0_clk, FRQCRB, 24, 0x97f, 0),
-	[DIV4_ZX] = DIV4(FRQCRB, 12, 0xdff, 0),
-	[DIV4_HP] = DIV4(FRQCRB, 4, 0xdff, 0),
-};
-
-static unsigned long twd_recalc(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 4;
-}
-
-static struct sh_clk_ops twd_clk_ops = {
-	.recalc = twd_recalc,
-};
-
-static struct clk twd_clk = {
-	.parent = &div4_clks[DIV4_Z],
-	.ops = &twd_clk_ops,
-};
-
-static struct sh_clk_ops zclk_ops, kicker_ops;
-static const struct sh_clk_ops *div4_clk_ops;
-
-static int zclk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret;
-
-	if (!clk->parent || !__clk_get(clk->parent))
-		return -ENODEV;
-
-	if (readl(FRQCRB) & (1 << 31))
-		return -EBUSY;
-
-	if (rate == clk_get_rate(clk->parent)) {
-		/* 1:1 - switch off divider */
-		__raw_writel(__raw_readl(FRQCRB) & ~(1 << 28), FRQCRB);
-		/* nullify the divider to prepare for the next time */
-		ret = div4_clk_ops->set_rate(clk, rate / 2);
-		if (!ret)
-			ret = frqcr_kick();
-		if (ret > 0)
-			ret = 0;
-	} else {
-		/* Enable the divider */
-		__raw_writel(__raw_readl(FRQCRB) | (1 << 28), FRQCRB);
-
-		ret = frqcr_kick();
-		if (ret >= 0)
-			/*
-			 * set the divider - call the DIV4 method, it will kick
-			 * FRQCRB too
-			 */
-			ret = div4_clk_ops->set_rate(clk, rate);
-		if (ret < 0)
-			goto esetrate;
-	}
-
-esetrate:
-	__clk_put(clk->parent);
-	return ret;
-}
-
-static long zclk_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long div_freq = div4_clk_ops->round_rate(clk, rate),
-		parent_freq = clk_get_rate(clk->parent);
-
-	if (rate > div_freq && abs(parent_freq - rate) < rate - div_freq)
-		return parent_freq;
-
-	return div_freq;
-}
-
-static unsigned long zclk_recalc(struct clk *clk)
-{
-	/*
-	 * Must recalculate frequencies in case PLL0 has been changed, even if
-	 * the divisor is unused ATM!
-	 */
-	unsigned long div_freq = div4_clk_ops->recalc(clk);
-
-	if (__raw_readl(FRQCRB) & (1 << 28))
-		return div_freq;
-
-	return clk_get_rate(clk->parent);
-}
-
-static int kicker_set_rate(struct clk *clk, unsigned long rate)
-{
-	if (__raw_readl(FRQCRB) & (1 << 31))
-		return -EBUSY;
-
-	return div4_clk_ops->set_rate(clk, rate);
-}
-
-static void div4_clk_extend(void)
-{
-	int i;
-
-	div4_clk_ops = div4_clks[0].ops;
-
-	/* Add a kicker-busy check before changing the rate */
-	kicker_ops = *div4_clk_ops;
-	/* We extend the DIV4 clock with a 1:1 pass-through case */
-	zclk_ops = *div4_clk_ops;
-
-	kicker_ops.set_rate = kicker_set_rate;
-	zclk_ops.set_rate = zclk_set_rate;
-	zclk_ops.round_rate = zclk_round_rate;
-	zclk_ops.recalc = zclk_recalc;
-
-	for (i = 0; i < DIV4_NR; i++)
-		div4_clks[i].ops = i == DIV4_Z ? &zclk_ops : &kicker_ops;
-}
-
-enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_ZB1,
-	DIV6_FLCTL, DIV6_SDHI0, DIV6_SDHI1, DIV6_SDHI2,
-	DIV6_FSIA, DIV6_FSIB, DIV6_SUB,
-	DIV6_SPUA, DIV6_SPUV, DIV6_MSU,
-	DIV6_HSI,  DIV6_MFG1, DIV6_MFG2,
-	DIV6_DSIT, DIV6_DSI0P, DIV6_DSI1P,
-	DIV6_NR };
-
-static struct clk *vck_parent[8] = {
-	[0] = &pll1_div2_clk,
-	[1] = &pll2_clk,
-	[2] = &sh73a0_extcki_clk,
-	[3] = &sh73a0_extal2_clk,
-	[4] = &main_div2_clk,
-	[5] = &sh73a0_extalr_clk,
-	[6] = &main_clk,
-};
-
-static struct clk *pll_parent[4] = {
-	[0] = &pll1_div2_clk,
-	[1] = &pll2_clk,
-	[2] = &pll1_div13_clk,
-};
-
-static struct clk *hsi_parent[4] = {
-	[0] = &pll1_div2_clk,
-	[1] = &pll2_clk,
-	[2] = &pll1_div7_clk,
-};
-
-static struct clk *pll_extal2_parent[] = {
-	[0] = &pll1_div2_clk,
-	[1] = &pll2_clk,
-	[2] = &sh73a0_extal2_clk,
-	[3] = &sh73a0_extal2_clk,
-};
-
-static struct clk *dsi_parent[8] = {
-	[0] = &pll1_div2_clk,
-	[1] = &pll2_clk,
-	[2] = &main_clk,
-	[3] = &sh73a0_extal2_clk,
-	[4] = &sh73a0_extcki_clk,
-};
-
-static struct clk div6_clks[DIV6_NR] = {
-	[DIV6_VCK1] = SH_CLK_DIV6_EXT(VCLKCR1, 0,
-			vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
-	[DIV6_VCK2] = SH_CLK_DIV6_EXT(VCLKCR2, 0,
-			vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
-	[DIV6_VCK3] = SH_CLK_DIV6_EXT(VCLKCR3, 0,
-			vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
-	[DIV6_ZB1] = SH_CLK_DIV6_EXT(ZBCKCR, CLK_ENABLE_ON_INIT,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_FLCTL] = SH_CLK_DIV6_EXT(FLCKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_SDHI0] = SH_CLK_DIV6_EXT(SD0CKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 6, 2),
-	[DIV6_SDHI1] = SH_CLK_DIV6_EXT(SD1CKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 6, 2),
-	[DIV6_SDHI2] = SH_CLK_DIV6_EXT(SD2CKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 6, 2),
-	[DIV6_FSIA] = SH_CLK_DIV6_EXT(FSIACKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 6, 1),
-	[DIV6_FSIB] = SH_CLK_DIV6_EXT(FSIBCKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 6, 1),
-	[DIV6_SUB] = SH_CLK_DIV6_EXT(SUBCKCR, 0,
-			pll_extal2_parent, ARRAY_SIZE(pll_extal2_parent), 6, 2),
-	[DIV6_SPUA] = SH_CLK_DIV6_EXT(SPUACKCR, 0,
-			pll_extal2_parent, ARRAY_SIZE(pll_extal2_parent), 6, 2),
-	[DIV6_SPUV] = SH_CLK_DIV6_EXT(SPUVCKCR, 0,
-			pll_extal2_parent, ARRAY_SIZE(pll_extal2_parent), 6, 2),
-	[DIV6_MSU] = SH_CLK_DIV6_EXT(MSUCKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_HSI] = SH_CLK_DIV6_EXT(HSICKCR, 0,
-			hsi_parent, ARRAY_SIZE(hsi_parent), 6, 2),
-	[DIV6_MFG1] = SH_CLK_DIV6_EXT(MFCK1CR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_MFG2] = SH_CLK_DIV6_EXT(MFCK2CR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_DSIT] = SH_CLK_DIV6_EXT(DSITCKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_DSI0P] = SH_CLK_DIV6_EXT(DSI0PCKCR, 0,
-			dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
-	[DIV6_DSI1P] = SH_CLK_DIV6_EXT(DSI1PCKCR, 0,
-			dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
-};
-
-/* DSI DIV */
-static unsigned long dsiphy_recalc(struct clk *clk)
-{
-	u32 value;
-
-	value = __raw_readl(clk->mapping->base);
-
-	/* FIXME */
-	if (!(value & 0x000B8000))
-		return clk->parent->rate;
-
-	value &= 0x3f;
-	value += 1;
-
-	if ((value < 12) ||
-	    (value > 33)) {
-		pr_err("DSIPHY has wrong value (%d)", value);
-		return 0;
-	}
-
-	return clk->parent->rate / value;
-}
-
-static long dsiphy_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk_rate_mult_range_round(clk, 12, 33, rate);
-}
-
-static void dsiphy_disable(struct clk *clk)
-{
-	u32 value;
-
-	value = __raw_readl(clk->mapping->base);
-	value &= ~0x000B8000;
-
-	__raw_writel(value , clk->mapping->base);
-}
-
-static int dsiphy_enable(struct clk *clk)
-{
-	u32 value;
-	int multi;
-
-	value = __raw_readl(clk->mapping->base);
-	multi = (value & 0x3f) + 1;
-
-	if ((multi < 12) || (multi > 33))
-		return -EIO;
-
-	__raw_writel(value | 0x000B8000, clk->mapping->base);
-
-	return 0;
-}
-
-static int dsiphy_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 value;
-	int idx;
-
-	idx = rate / clk->parent->rate;
-	if ((idx < 12) || (idx > 33))
-		return -EINVAL;
-
-	idx += -1;
-
-	value = __raw_readl(clk->mapping->base);
-	value = (value & ~0x3f) + idx;
-
-	__raw_writel(value, clk->mapping->base);
-
-	return 0;
-}
-
-static struct sh_clk_ops dsiphy_clk_ops = {
-	.recalc		= dsiphy_recalc,
-	.round_rate	= dsiphy_round_rate,
-	.set_rate	= dsiphy_set_rate,
-	.enable		= dsiphy_enable,
-	.disable	= dsiphy_disable,
-};
-
-static struct clk_mapping dsi0phy_clk_mapping = {
-	.phys	= DSI0PHYCR,
-	.len	= 4,
-};
-
-static struct clk_mapping dsi1phy_clk_mapping = {
-	.phys	= DSI1PHYCR,
-	.len	= 4,
-};
-
-static struct clk dsi0phy_clk = {
-	.ops		= &dsiphy_clk_ops,
-	.parent		= &div6_clks[DIV6_DSI0P], /* late install */
-	.mapping	= &dsi0phy_clk_mapping,
-};
-
-static struct clk dsi1phy_clk = {
-	.ops		= &dsiphy_clk_ops,
-	.parent		= &div6_clks[DIV6_DSI1P], /* late install */
-	.mapping	= &dsi1phy_clk_mapping,
-};
-
-static struct clk *late_main_clks[] = {
-	&dsi0phy_clk,
-	&dsi1phy_clk,
-	&twd_clk,
-};
-
-enum { MSTP001,
-	MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP112, MSTP100,
-	MSTP219, MSTP218, MSTP217,
-	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
-	MSTP331, MSTP329, MSTP328, MSTP325, MSTP323, MSTP322,
-	MSTP314, MSTP313, MSTP312, MSTP311,
-	MSTP304, MSTP303, MSTP302, MSTP301, MSTP300,
-	MSTP411, MSTP410, MSTP403,
-	MSTP508,
-	MSTP_NR };
-
-#define MSTP(_parent, _reg, _bit, _flags) \
-	SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
-
-static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP001] = MSTP(&div4_clks[DIV4_HP], SMSTPCR0, 1, 0), /* IIC2 */
-	[MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* CEU1 */
-	[MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* CSI2-RX1 */
-	[MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU0 */
-	[MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2-RX0 */
-	[MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
-	[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX0 */
-	[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
-	[MSTP112] = MSTP(&div4_clks[DIV4_ZG], SMSTPCR1, 12, 0), /* SGX */
-	[MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
-	[MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */
-	[MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */
-	[MSTP217] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* MP-DMAC */
-	[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
-	[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
-	[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
-	[MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
-	[MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
-	[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
-	[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
-	[MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */
-	[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
-	[MSTP328] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 28, 0), /*FSI*/
-	[MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */
-	[MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
-	[MSTP322] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 22, 0), /* USB */
-	[MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */
-	[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
-	[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
-	[MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */
-	[MSTP304] = MSTP(&main_div2_clk, SMSTPCR3, 4, 0), /* TPU0 */
-	[MSTP303] = MSTP(&main_div2_clk, SMSTPCR3, 3, 0), /* TPU1 */
-	[MSTP302] = MSTP(&main_div2_clk, SMSTPCR3, 2, 0), /* TPU2 */
-	[MSTP301] = MSTP(&main_div2_clk, SMSTPCR3, 1, 0), /* TPU3 */
-	[MSTP300] = MSTP(&main_div2_clk, SMSTPCR3, 0, 0), /* TPU4 */
-	[MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */
-	[MSTP410] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */
-	[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
-	[MSTP508] = MSTP(&div4_clks[DIV4_HP], SMSTPCR5, 8, 0), /* INTCA0 */
-};
-
-/* The lookups structure below includes duplicate entries for some clocks
- * with alternate names.
- * - The traditional name used when a device is initialised with platform data
- * - The name used when a device is initialised using device tree
- * The longer-term aim is to remove these duplicates, and indeed the
- * lookups table entirely, by describing clocks using device tree.
- */
-static struct clk_lookup lookups[] = {
-	/* main clocks */
-	CLKDEV_CON_ID("r_clk", &r_clk),
-	CLKDEV_DEV_ID("smp_twd", &twd_clk), /* smp_twd */
-
-	/* DIV4 clocks */
-	CLKDEV_DEV_ID("cpu0", &div4_clks[DIV4_Z]),
-
-	/* DIV6 clocks */
-	CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
-	CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
-	CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
-	CLKDEV_CON_ID("sdhi0_clk", &div6_clks[DIV6_SDHI0]),
-	CLKDEV_CON_ID("sdhi1_clk", &div6_clks[DIV6_SDHI1]),
-	CLKDEV_CON_ID("sdhi2_clk", &div6_clks[DIV6_SDHI2]),
-
-	/* MSTP32 clocks */
-	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
-	CLKDEV_DEV_ID("e6824000.i2c", &mstp_clks[MSTP001]), /* I2C2 */
-	CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP129]), /* CEU1 */
-	CLKDEV_DEV_ID("sh-mobile-csi2.1", &mstp_clks[MSTP128]), /* CSI2-RX1 */
-	CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU0 */
-	CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2-RX0 */
-	CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
-	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
-	CLKDEV_DEV_ID("e6820000.i2c", &mstp_clks[MSTP116]), /* I2C0 */
-	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
-	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
-	CLKDEV_DEV_ID("e6cd0000.serial", &mstp_clks[MSTP219]), /* SCIFA7 */
-	CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */
-	CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* MP-DMAC */
-	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
-	CLKDEV_DEV_ID("e6cb0000.serial", &mstp_clks[MSTP207]), /* SCIFA5 */
-	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
-	CLKDEV_DEV_ID("e6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */
-	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
-	CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]), /* SCIFA0 */
-	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
-	CLKDEV_DEV_ID("e6c50000.serial", &mstp_clks[MSTP203]), /* SCIFA1 */
-	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
-	CLKDEV_DEV_ID("e6c60000.serial", &mstp_clks[MSTP202]), /* SCIFA2 */
-	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
-	CLKDEV_DEV_ID("e6c70000.serial", &mstp_clks[MSTP201]), /* SCIFA3 */
-	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
-	CLKDEV_DEV_ID("e6c80000.serial", &mstp_clks[MSTP200]), /* SCIFA4 */
-	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
-	CLKDEV_DEV_ID("e6cc0000.serial", &mstp_clks[MSTP331]), /* SCIFA6 */
-	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */
-	CLKDEV_DEV_ID("ec230000.sound", &mstp_clks[MSTP328]), /* FSI */
-	CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
-	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
-	CLKDEV_DEV_ID("e6822000.i2c", &mstp_clks[MSTP323]), /* I2C1 */
-	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP322]), /* USB */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
-	CLKDEV_DEV_ID("ee100000.sd", &mstp_clks[MSTP314]), /* SDHI0 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
-	CLKDEV_DEV_ID("ee120000.sd", &mstp_clks[MSTP313]), /* SDHI1 */
-	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
-	CLKDEV_DEV_ID("e6bd0000.mmc", &mstp_clks[MSTP312]), /* MMCIF0 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
-	CLKDEV_DEV_ID("ee140000.sd", &mstp_clks[MSTP311]), /* SDHI2 */
-	CLKDEV_DEV_ID("renesas-tpu-pwm.0", &mstp_clks[MSTP304]), /* TPU0 */
-	CLKDEV_DEV_ID("renesas-tpu-pwm.1", &mstp_clks[MSTP303]), /* TPU1 */
-	CLKDEV_DEV_ID("renesas-tpu-pwm.2", &mstp_clks[MSTP302]), /* TPU2 */
-	CLKDEV_DEV_ID("renesas-tpu-pwm.3", &mstp_clks[MSTP301]), /* TPU3 */
-	CLKDEV_DEV_ID("renesas-tpu-pwm.4", &mstp_clks[MSTP300]), /* TPU4 */
-	CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */
-	CLKDEV_DEV_ID("e6826000.i2c", &mstp_clks[MSTP411]), /* I2C3 */
-	CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */
-	CLKDEV_DEV_ID("e6828000.i2c", &mstp_clks[MSTP410]), /* I2C4 */
-	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
-	CLKDEV_DEV_ID("renesas_intc_irqpin.0",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("e6900000.irqpin",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("renesas_intc_irqpin.1",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("e6900004.irqpin",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("renesas_intc_irqpin.2",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("e6900008.irqpin",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("renesas_intc_irqpin.3",	&mstp_clks[MSTP508]), /* INTCA0 */
-	CLKDEV_DEV_ID("e690000c.irqpin",	&mstp_clks[MSTP508]), /* INTCA0 */
-
-	/* ICK */
-	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
-	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
-	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
-	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
-	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
-	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
-	CLKDEV_ICK_ID("fck", "sh-cmt-48.1", &mstp_clks[MSTP329]), /* CMT1 */
-	CLKDEV_ICK_ID("fck", "e6138000.timer", &mstp_clks[MSTP329]), /* CMT1 */
-	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP125]), /* TMU0 */
-};
-
-void __init sh73a0_clock_init(void)
-{
-	int k, ret = 0;
-
-	/* Set SDHI clocks to a known state */
-	__raw_writel(0x108, SD0CKCR);
-	__raw_writel(0x108, SD1CKCR);
-	__raw_writel(0x108, SD2CKCR);
-
-	/* detect main clock parent */
-	switch ((__raw_readl(CKSCR) >> 28) & 0x03) {
-	case 0:
-		main_clk.parent = &sh73a0_extal1_clk;
-		break;
-	case 1:
-		main_clk.parent = &extal1_div2_clk;
-		break;
-	case 2:
-		main_clk.parent = &sh73a0_extal2_clk;
-		break;
-	case 3:
-		main_clk.parent = &extal2_div2_clk;
-		break;
-	}
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	if (!ret) {
-		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-		if (!ret)
-			div4_clk_extend();
-	}
-
-	if (!ret)
-		ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR);
-
-	if (!ret)
-		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
-		ret = clk_register(late_main_clks[k]);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup sh73a0 clocks\n");
-}
diff --git a/arch/arm/mach-shmobile/pm-sh73a0.c b/arch/arm/mach-shmobile/pm-sh73a0.c
deleted file mode 100644
index a7e466817965..000000000000
--- a/arch/arm/mach-shmobile/pm-sh73a0.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * sh73a0 Power management support
- *
- *  Copyright (C) 2012 Bastian Hecht <hechtb+renesas@gmail.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/suspend.h>
-#include "common.h"
-
-#ifdef CONFIG_SUSPEND
-static int sh73a0_enter_suspend(suspend_state_t suspend_state)
-{
-	cpu_do_idle();
-	return 0;
-}
-
-static void sh73a0_suspend_init(void)
-{
-	shmobile_suspend_ops.enter = sh73a0_enter_suspend;
-}
-#else
-static void sh73a0_suspend_init(void) {}
-#endif
-
-void __init sh73a0_pm_init(void)
-{
-	sh73a0_suspend_init();
-}
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index fb2ab7590af8..a1e8e72e25b5 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -18,28 +18,17 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/platform_device.h>
 #include <linux/of_platform.h>
 #include <linux/delay.h>
 #include <linux/input.h>
-#include <linux/i2c/i2c-sh_mobile.h>
 #include <linux/io.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
-#include <linux/platform_data/sh_ipmmu.h>
-#include <linux/platform_data/irq-renesas-intc-irqpin.h>
 
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "common.h"
-#include "dma-register.h"
-#include "intc.h"
-#include "irqs.h"
 #include "sh73a0.h"
 
 static struct map_desc sh73a0_io_desc[] __initdata = {
@@ -54,737 +43,12 @@ static struct map_desc sh73a0_io_desc[] __initdata = {
 	},
 };
 
-void __init sh73a0_map_io(void)
+static void __init sh73a0_map_io(void)
 {
 	debug_ll_io_init();
 	iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc));
 }
 
-/* PFC */
-static struct resource pfc_resources[] __initdata = {
-	DEFINE_RES_MEM(0xe6050000, 0x8000),
-	DEFINE_RES_MEM(0xe605801c, 0x000c),
-};
-
-void __init sh73a0_pinmux_init(void)
-{
-	platform_device_register_simple("pfc-sh73a0", -1, pfc_resources,
-					ARRAY_SIZE(pfc_resources));
-}
-
-/* SCIF */
-#define SH73A0_SCIF(scif_type, index, baseaddr, irq)		\
-static struct plat_sci_port scif##index##_platform_data = {	\
-	.type		= scif_type,				\
-	.flags		= UPF_BOOT_AUTOCONF,			\
-	.scscr		= SCSCR_RE | SCSCR_TE,			\
-};								\
-								\
-static struct resource scif##index##_resources[] = {		\
-	DEFINE_RES_MEM(baseaddr, 0x100),			\
-	DEFINE_RES_IRQ(irq),					\
-};								\
-								\
-static struct platform_device scif##index##_device = {		\
-	.name		= "sh-sci",				\
-	.id		= index,				\
-	.resource	= scif##index##_resources,		\
-	.num_resources	= ARRAY_SIZE(scif##index##_resources),	\
-	.dev		= {					\
-		.platform_data	= &scif##index##_platform_data,	\
-	},							\
-}
-
-SH73A0_SCIF(PORT_SCIFA, 0, 0xe6c40000, gic_spi(72));
-SH73A0_SCIF(PORT_SCIFA, 1, 0xe6c50000, gic_spi(73));
-SH73A0_SCIF(PORT_SCIFA, 2, 0xe6c60000, gic_spi(74));
-SH73A0_SCIF(PORT_SCIFA, 3, 0xe6c70000, gic_spi(75));
-SH73A0_SCIF(PORT_SCIFA, 4, 0xe6c80000, gic_spi(78));
-SH73A0_SCIF(PORT_SCIFA, 5, 0xe6cb0000, gic_spi(79));
-SH73A0_SCIF(PORT_SCIFA, 6, 0xe6cc0000, gic_spi(156));
-SH73A0_SCIF(PORT_SCIFA, 7, 0xe6cd0000, gic_spi(143));
-SH73A0_SCIF(PORT_SCIFB, 8, 0xe6c30000, gic_spi(80));
-
-static struct sh_timer_config cmt1_platform_data = {
-	.channels_mask = 0x3f,
-};
-
-static struct resource cmt1_resources[] = {
-	DEFINE_RES_MEM(0xe6138000, 0x200),
-	DEFINE_RES_IRQ(gic_spi(65)),
-};
-
-static struct platform_device cmt1_device = {
-	.name		= "sh-cmt-48",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &cmt1_platform_data,
-	},
-	.resource	= cmt1_resources,
-	.num_resources	= ARRAY_SIZE(cmt1_resources),
-};
-
-/* TMU */
-static struct sh_timer_config tmu0_platform_data = {
-	.channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
-	DEFINE_RES_MEM(0xfff60000, 0x2c),
-	DEFINE_RES_IRQ(intcs_evt2irq(0xe80)),
-	DEFINE_RES_IRQ(intcs_evt2irq(0xea0)),
-	DEFINE_RES_IRQ(intcs_evt2irq(0xec0)),
-};
-
-static struct platform_device tmu0_device = {
-	.name		= "sh-tmu",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &tmu0_platform_data,
-	},
-	.resource	= tmu0_resources,
-	.num_resources	= ARRAY_SIZE(tmu0_resources),
-};
-
-static struct resource i2c0_resources[] = {
-	[0] = DEFINE_RES_MEM(0xe6820000, 0x426),
-	[1] = {
-		.start	= gic_spi(167),
-		.end	= gic_spi(170),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c1_resources[] = {
-	[0] = DEFINE_RES_MEM(0xe6822000, 0x426),
-	[1] = {
-		.start	= gic_spi(51),
-		.end	= gic_spi(54),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c2_resources[] = {
-	[0] = DEFINE_RES_MEM(0xe6824000, 0x426),
-	[1] = {
-		.start	= gic_spi(171),
-		.end	= gic_spi(174),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c3_resources[] = {
-	[0] = DEFINE_RES_MEM(0xe6826000, 0x426),
-	[1] = {
-		.start	= gic_spi(183),
-		.end	= gic_spi(186),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c4_resources[] = {
-	[0] = DEFINE_RES_MEM(0xe6828000, 0x426),
-	[1] = {
-		.start	= gic_spi(187),
-		.end	= gic_spi(190),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct i2c_sh_mobile_platform_data i2c_platform_data = {
-	.clks_per_count	= 2,
-};
-
-static struct platform_device i2c0_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 0,
-	.resource	= i2c0_resources,
-	.num_resources	= ARRAY_SIZE(i2c0_resources),
-	.dev		= {
-		.platform_data	= &i2c_platform_data,
-	},
-};
-
-static struct platform_device i2c1_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 1,
-	.resource	= i2c1_resources,
-	.num_resources	= ARRAY_SIZE(i2c1_resources),
-	.dev		= {
-		.platform_data	= &i2c_platform_data,
-	},
-};
-
-static struct platform_device i2c2_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 2,
-	.resource	= i2c2_resources,
-	.num_resources	= ARRAY_SIZE(i2c2_resources),
-	.dev		= {
-		.platform_data	= &i2c_platform_data,
-	},
-};
-
-static struct platform_device i2c3_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 3,
-	.resource	= i2c3_resources,
-	.num_resources	= ARRAY_SIZE(i2c3_resources),
-	.dev		= {
-		.platform_data	= &i2c_platform_data,
-	},
-};
-
-static struct platform_device i2c4_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 4,
-	.resource	= i2c4_resources,
-	.num_resources	= ARRAY_SIZE(i2c4_resources),
-	.dev		= {
-		.platform_data	= &i2c_platform_data,
-	},
-};
-
-static const struct sh_dmae_slave_config sh73a0_dmae_slaves[] = {
-	{
-		.slave_id	= SHDMA_SLAVE_SCIF0_TX,
-		.addr		= 0xe6c40020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x21,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF0_RX,
-		.addr		= 0xe6c40024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x22,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF1_TX,
-		.addr		= 0xe6c50020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x25,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF1_RX,
-		.addr		= 0xe6c50024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x26,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF2_TX,
-		.addr		= 0xe6c60020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x29,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF2_RX,
-		.addr		= 0xe6c60024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x2a,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF3_TX,
-		.addr		= 0xe6c70020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x2d,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF3_RX,
-		.addr		= 0xe6c70024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x2e,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF4_TX,
-		.addr		= 0xe6c80020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x39,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF4_RX,
-		.addr		= 0xe6c80024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x3a,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF5_TX,
-		.addr		= 0xe6cb0020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x35,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF5_RX,
-		.addr		= 0xe6cb0024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x36,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF6_TX,
-		.addr		= 0xe6cc0020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x1d,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF6_RX,
-		.addr		= 0xe6cc0024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x1e,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF7_TX,
-		.addr		= 0xe6cd0020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x19,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF7_RX,
-		.addr		= 0xe6cd0024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x1a,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF8_TX,
-		.addr		= 0xe6c30040,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x3d,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF8_RX,
-		.addr		= 0xe6c30060,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x3e,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI0_TX,
-		.addr		= 0xee100030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc1,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI0_RX,
-		.addr		= 0xee100030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc2,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI1_TX,
-		.addr		= 0xee120030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc9,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI1_RX,
-		.addr		= 0xee120030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xca,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI2_TX,
-		.addr		= 0xee140030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xcd,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI2_RX,
-		.addr		= 0xee140030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xce,
-	}, {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-		.addr		= 0xe6bd0034,
-		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd1,
-	}, {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-		.addr		= 0xe6bd0034,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd2,
-	},
-};
-
-#define DMAE_CHANNEL(_offset)					\
-	{							\
-		.offset         = _offset - 0x20,		\
-		.dmars          = _offset - 0x20 + 0x40,	\
-	}
-
-static const struct sh_dmae_channel sh73a0_dmae_channels[] = {
-	DMAE_CHANNEL(0x8000),
-	DMAE_CHANNEL(0x8080),
-	DMAE_CHANNEL(0x8100),
-	DMAE_CHANNEL(0x8180),
-	DMAE_CHANNEL(0x8200),
-	DMAE_CHANNEL(0x8280),
-	DMAE_CHANNEL(0x8300),
-	DMAE_CHANNEL(0x8380),
-	DMAE_CHANNEL(0x8400),
-	DMAE_CHANNEL(0x8480),
-	DMAE_CHANNEL(0x8500),
-	DMAE_CHANNEL(0x8580),
-	DMAE_CHANNEL(0x8600),
-	DMAE_CHANNEL(0x8680),
-	DMAE_CHANNEL(0x8700),
-	DMAE_CHANNEL(0x8780),
-	DMAE_CHANNEL(0x8800),
-	DMAE_CHANNEL(0x8880),
-	DMAE_CHANNEL(0x8900),
-	DMAE_CHANNEL(0x8980),
-};
-
-static struct sh_dmae_pdata sh73a0_dmae_platform_data = {
-	.slave          = sh73a0_dmae_slaves,
-	.slave_num      = ARRAY_SIZE(sh73a0_dmae_slaves),
-	.channel        = sh73a0_dmae_channels,
-	.channel_num    = ARRAY_SIZE(sh73a0_dmae_channels),
-	.ts_low_shift   = TS_LOW_SHIFT,
-	.ts_low_mask    = TS_LOW_BIT << TS_LOW_SHIFT,
-	.ts_high_shift  = TS_HI_SHIFT,
-	.ts_high_mask   = TS_HI_BIT << TS_HI_SHIFT,
-	.ts_shift       = dma_ts_shift,
-	.ts_shift_num   = ARRAY_SIZE(dma_ts_shift),
-	.dmaor_init     = DMAOR_DME,
-};
-
-static struct resource sh73a0_dmae_resources[] = {
-	DEFINE_RES_MEM(0xfe000020, 0x89e0),
-	{
-		.name	= "error_irq",
-		.start  = gic_spi(129),
-		.end    = gic_spi(129),
-		.flags  = IORESOURCE_IRQ,
-	},
-	{
-		/* IRQ for channels 0-19 */
-		.start  = gic_spi(109),
-		.end    = gic_spi(128),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dma0_device = {
-	.name		= "sh-dma-engine",
-	.id		= 0,
-	.resource	= sh73a0_dmae_resources,
-	.num_resources	= ARRAY_SIZE(sh73a0_dmae_resources),
-	.dev		= {
-		.platform_data	= &sh73a0_dmae_platform_data,
-	},
-};
-
-/* MPDMAC */
-static const struct sh_dmae_slave_config sh73a0_mpdma_slaves[] = {
-	{
-		.slave_id	= SHDMA_SLAVE_FSI2A_RX,
-		.addr		= 0xec230020,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd6, /* CHECK ME */
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSI2A_TX,
-		.addr		= 0xec230024,
-		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd5, /* CHECK ME */
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSI2C_RX,
-		.addr		= 0xec230060,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xda, /* CHECK ME */
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSI2C_TX,
-		.addr		= 0xec230064,
-		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd9, /* CHECK ME */
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSI2B_RX,
-		.addr		= 0xec240020,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0x8e, /* CHECK ME */
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSI2B_TX,
-		.addr		= 0xec240024,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0x8d, /* CHECK ME */
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSI2D_RX,
-		.addr		=  0xec240060,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0x9a, /* CHECK ME */
-	},
-};
-
-#define MPDMA_CHANNEL(a, b, c)			\
-{						\
-	.offset		= a,			\
-	.dmars		= b,			\
-	.dmars_bit	= c,			\
-	.chclr_offset	= (0x220 - 0x20) + a	\
-}
-
-static const struct sh_dmae_channel sh73a0_mpdma_channels[] = {
-	MPDMA_CHANNEL(0x00, 0, 0),
-	MPDMA_CHANNEL(0x10, 0, 8),
-	MPDMA_CHANNEL(0x20, 4, 0),
-	MPDMA_CHANNEL(0x30, 4, 8),
-	MPDMA_CHANNEL(0x50, 8, 0),
-	MPDMA_CHANNEL(0x70, 8, 8),
-};
-
-static struct sh_dmae_pdata sh73a0_mpdma_platform_data = {
-	.slave		= sh73a0_mpdma_slaves,
-	.slave_num	= ARRAY_SIZE(sh73a0_mpdma_slaves),
-	.channel	= sh73a0_mpdma_channels,
-	.channel_num	= ARRAY_SIZE(sh73a0_mpdma_channels),
-	.ts_low_shift	= TS_LOW_SHIFT,
-	.ts_low_mask	= TS_LOW_BIT << TS_LOW_SHIFT,
-	.ts_high_shift	= TS_HI_SHIFT,
-	.ts_high_mask	= TS_HI_BIT << TS_HI_SHIFT,
-	.ts_shift	= dma_ts_shift,
-	.ts_shift_num	= ARRAY_SIZE(dma_ts_shift),
-	.dmaor_init	= DMAOR_DME,
-	.chclr_present	= 1,
-};
-
-/* Resource order important! */
-static struct resource sh73a0_mpdma_resources[] = {
-	/* Channel registers and DMAOR */
-	DEFINE_RES_MEM(0xec618020, 0x270),
-	/* DMARSx */
-	DEFINE_RES_MEM(0xec619000, 0xc),
-	{
-		.name	= "error_irq",
-		.start	= gic_spi(181),
-		.end	= gic_spi(181),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		/* IRQ for channels 0-5 */
-		.start	= gic_spi(175),
-		.end	= gic_spi(180),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mpdma0_device = {
-	.name		= "sh-dma-engine",
-	.id		= 1,
-	.resource	= sh73a0_mpdma_resources,
-	.num_resources	= ARRAY_SIZE(sh73a0_mpdma_resources),
-	.dev		= {
-		.platform_data	= &sh73a0_mpdma_platform_data,
-	},
-};
-
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start	= gic_spi(55),
-		.end	= gic_spi(55),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= gic_spi(56),
-		.end	= gic_spi(56),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.name		= "armv7-pmu",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pmu_resources),
-	.resource	= pmu_resources,
-};
-
-/* an IPMMU module for ICB */
-static struct resource ipmmu_resources[] = {
-	DEFINE_RES_MEM(0xfe951000, 0x100),
-};
-
-static const char * const ipmmu_dev_names[] = {
-	"sh_mobile_lcdc_fb.0",
-};
-
-static struct shmobile_ipmmu_platform_data ipmmu_platform_data = {
-	.dev_names = ipmmu_dev_names,
-	.num_dev_names = ARRAY_SIZE(ipmmu_dev_names),
-};
-
-static struct platform_device ipmmu_device = {
-	.name           = "ipmmu",
-	.id             = -1,
-	.dev = {
-		.platform_data = &ipmmu_platform_data,
-	},
-	.resource       = ipmmu_resources,
-	.num_resources  = ARRAY_SIZE(ipmmu_resources),
-};
-
-static struct renesas_intc_irqpin_config irqpin0_platform_data = {
-	.irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */
-	.control_parent = true,
-};
-
-static struct resource irqpin0_resources[] = {
-	DEFINE_RES_MEM(0xe6900000, 4), /* ICR1A */
-	DEFINE_RES_MEM(0xe6900010, 4), /* INTPRI00A */
-	DEFINE_RES_MEM(0xe6900020, 1), /* INTREQ00A */
-	DEFINE_RES_MEM(0xe6900040, 1), /* INTMSK00A */
-	DEFINE_RES_MEM(0xe6900060, 1), /* INTMSKCLR00A */
-	DEFINE_RES_IRQ(gic_spi(1)), /* IRQ0 */
-	DEFINE_RES_IRQ(gic_spi(2)), /* IRQ1 */
-	DEFINE_RES_IRQ(gic_spi(3)), /* IRQ2 */
-	DEFINE_RES_IRQ(gic_spi(4)), /* IRQ3 */
-	DEFINE_RES_IRQ(gic_spi(5)), /* IRQ4 */
-	DEFINE_RES_IRQ(gic_spi(6)), /* IRQ5 */
-	DEFINE_RES_IRQ(gic_spi(7)), /* IRQ6 */
-	DEFINE_RES_IRQ(gic_spi(8)), /* IRQ7 */
-};
-
-static struct platform_device irqpin0_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 0,
-	.resource	= irqpin0_resources,
-	.num_resources	= ARRAY_SIZE(irqpin0_resources),
-	.dev		= {
-		.platform_data	= &irqpin0_platform_data,
-	},
-};
-
-static struct renesas_intc_irqpin_config irqpin1_platform_data = {
-	.irq_base = irq_pin(8), /* IRQ8 -> IRQ15 */
-	.control_parent = true, /* Disable spurious IRQ10 */
-};
-
-static struct resource irqpin1_resources[] = {
-	DEFINE_RES_MEM(0xe6900004, 4), /* ICR2A */
-	DEFINE_RES_MEM(0xe6900014, 4), /* INTPRI10A */
-	DEFINE_RES_MEM(0xe6900024, 1), /* INTREQ10A */
-	DEFINE_RES_MEM(0xe6900044, 1), /* INTMSK10A */
-	DEFINE_RES_MEM(0xe6900064, 1), /* INTMSKCLR10A */
-	DEFINE_RES_IRQ(gic_spi(9)), /* IRQ8 */
-	DEFINE_RES_IRQ(gic_spi(10)), /* IRQ9 */
-	DEFINE_RES_IRQ(gic_spi(11)), /* IRQ10 */
-	DEFINE_RES_IRQ(gic_spi(12)), /* IRQ11 */
-	DEFINE_RES_IRQ(gic_spi(13)), /* IRQ12 */
-	DEFINE_RES_IRQ(gic_spi(14)), /* IRQ13 */
-	DEFINE_RES_IRQ(gic_spi(15)), /* IRQ14 */
-	DEFINE_RES_IRQ(gic_spi(16)), /* IRQ15 */
-};
-
-static struct platform_device irqpin1_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 1,
-	.resource	= irqpin1_resources,
-	.num_resources	= ARRAY_SIZE(irqpin1_resources),
-	.dev		= {
-		.platform_data	= &irqpin1_platform_data,
-	},
-};
-
-static struct renesas_intc_irqpin_config irqpin2_platform_data = {
-	.irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */
-	.control_parent = true,
-};
-
-static struct resource irqpin2_resources[] = {
-	DEFINE_RES_MEM(0xe6900008, 4), /* ICR3A */
-	DEFINE_RES_MEM(0xe6900018, 4), /* INTPRI20A */
-	DEFINE_RES_MEM(0xe6900028, 1), /* INTREQ20A */
-	DEFINE_RES_MEM(0xe6900048, 1), /* INTMSK20A */
-	DEFINE_RES_MEM(0xe6900068, 1), /* INTMSKCLR20A */
-	DEFINE_RES_IRQ(gic_spi(17)), /* IRQ16 */
-	DEFINE_RES_IRQ(gic_spi(18)), /* IRQ17 */
-	DEFINE_RES_IRQ(gic_spi(19)), /* IRQ18 */
-	DEFINE_RES_IRQ(gic_spi(20)), /* IRQ19 */
-	DEFINE_RES_IRQ(gic_spi(21)), /* IRQ20 */
-	DEFINE_RES_IRQ(gic_spi(22)), /* IRQ21 */
-	DEFINE_RES_IRQ(gic_spi(23)), /* IRQ22 */
-	DEFINE_RES_IRQ(gic_spi(24)), /* IRQ23 */
-};
-
-static struct platform_device irqpin2_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 2,
-	.resource	= irqpin2_resources,
-	.num_resources	= ARRAY_SIZE(irqpin2_resources),
-	.dev		= {
-		.platform_data	= &irqpin2_platform_data,
-	},
-};
-
-static struct renesas_intc_irqpin_config irqpin3_platform_data = {
-	.irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */
-	.control_parent = true,
-};
-
-static struct resource irqpin3_resources[] = {
-	DEFINE_RES_MEM(0xe690000c, 4), /* ICR4A */
-	DEFINE_RES_MEM(0xe690001c, 4), /* INTPRI30A */
-	DEFINE_RES_MEM(0xe690002c, 1), /* INTREQ30A */
-	DEFINE_RES_MEM(0xe690004c, 1), /* INTMSK30A */
-	DEFINE_RES_MEM(0xe690006c, 1), /* INTMSKCLR30A */
-	DEFINE_RES_IRQ(gic_spi(25)), /* IRQ24 */
-	DEFINE_RES_IRQ(gic_spi(26)), /* IRQ25 */
-	DEFINE_RES_IRQ(gic_spi(27)), /* IRQ26 */
-	DEFINE_RES_IRQ(gic_spi(28)), /* IRQ27 */
-	DEFINE_RES_IRQ(gic_spi(29)), /* IRQ28 */
-	DEFINE_RES_IRQ(gic_spi(30)), /* IRQ29 */
-	DEFINE_RES_IRQ(gic_spi(31)), /* IRQ30 */
-	DEFINE_RES_IRQ(gic_spi(32)), /* IRQ31 */
-};
-
-static struct platform_device irqpin3_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 3,
-	.resource	= irqpin3_resources,
-	.num_resources	= ARRAY_SIZE(irqpin3_resources),
-	.dev		= {
-		.platform_data	= &irqpin3_platform_data,
-	},
-};
-
-static struct platform_device *sh73a0_early_devices[] __initdata = {
-	&scif0_device,
-	&scif1_device,
-	&scif2_device,
-	&scif3_device,
-	&scif4_device,
-	&scif5_device,
-	&scif6_device,
-	&scif7_device,
-	&scif8_device,
-	&tmu0_device,
-	&ipmmu_device,
-	&cmt1_device,
-};
-
-static struct platform_device *sh73a0_late_devices[] __initdata = {
-	&i2c0_device,
-	&i2c1_device,
-	&i2c2_device,
-	&i2c3_device,
-	&i2c4_device,
-	&dma0_device,
-	&mpdma0_device,
-	&pmu_device,
-	&irqpin0_device,
-	&irqpin1_device,
-	&irqpin2_device,
-	&irqpin3_device,
-};
-
-#define SRCR2          IOMEM(0xe61580b0)
-
-void __init sh73a0_add_standard_devices(void)
-{
-	/* Clear software reset bit on SY-DMAC module */
-	__raw_writel(__raw_readl(SRCR2) & ~(1 << 18), SRCR2);
-
-	platform_add_devices(sh73a0_early_devices,
-			    ARRAY_SIZE(sh73a0_early_devices));
-	platform_add_devices(sh73a0_late_devices,
-			    ARRAY_SIZE(sh73a0_late_devices));
-}
-
-/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
-void __init __weak sh73a0_register_twd(void) { }
-
-void __init sh73a0_earlytimer_init(void)
-{
-	shmobile_init_delay();
-#ifndef CONFIG_COMMON_CLK
-	sh73a0_clock_init();
-#endif
-	shmobile_earlytimer_init();
-	sh73a0_register_twd();
-}
-
-void __init sh73a0_add_early_devices(void)
-{
-	early_platform_add_devices(sh73a0_early_devices,
-				   ARRAY_SIZE(sh73a0_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
-}
-
-#ifdef CONFIG_USE_OF
-
 static void __init sh73a0_generic_init(void)
 {
 #ifdef CONFIG_CACHE_L2X0
@@ -807,4 +71,3 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
 	.init_late	= shmobile_init_late,
 	.dt_compat	= sh73a0_boards_compat_dt,
 MACHINE_END
-#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/sh73a0.h b/arch/arm/mach-shmobile/sh73a0.h
index 5a80f18b4fa0..39646806cf64 100644
--- a/arch/arm/mach-shmobile/sh73a0.h
+++ b/arch/arm/mach-shmobile/sh73a0.h
@@ -1,89 +1,6 @@
 #ifndef __ASM_SH73A0_H__
 #define __ASM_SH73A0_H__
 
-/* DMA slave IDs */
-enum {
-	SHDMA_SLAVE_INVALID,
-	SHDMA_SLAVE_SCIF0_TX,
-	SHDMA_SLAVE_SCIF0_RX,
-	SHDMA_SLAVE_SCIF1_TX,
-	SHDMA_SLAVE_SCIF1_RX,
-	SHDMA_SLAVE_SCIF2_TX,
-	SHDMA_SLAVE_SCIF2_RX,
-	SHDMA_SLAVE_SCIF3_TX,
-	SHDMA_SLAVE_SCIF3_RX,
-	SHDMA_SLAVE_SCIF4_TX,
-	SHDMA_SLAVE_SCIF4_RX,
-	SHDMA_SLAVE_SCIF5_TX,
-	SHDMA_SLAVE_SCIF5_RX,
-	SHDMA_SLAVE_SCIF6_TX,
-	SHDMA_SLAVE_SCIF6_RX,
-	SHDMA_SLAVE_SCIF7_TX,
-	SHDMA_SLAVE_SCIF7_RX,
-	SHDMA_SLAVE_SCIF8_TX,
-	SHDMA_SLAVE_SCIF8_RX,
-	SHDMA_SLAVE_SDHI0_TX,
-	SHDMA_SLAVE_SDHI0_RX,
-	SHDMA_SLAVE_SDHI1_TX,
-	SHDMA_SLAVE_SDHI1_RX,
-	SHDMA_SLAVE_SDHI2_TX,
-	SHDMA_SLAVE_SDHI2_RX,
-	SHDMA_SLAVE_MMCIF_TX,
-	SHDMA_SLAVE_MMCIF_RX,
-	SHDMA_SLAVE_FSI2A_TX,
-	SHDMA_SLAVE_FSI2A_RX,
-	SHDMA_SLAVE_FSI2B_TX,
-	SHDMA_SLAVE_FSI2B_RX,
-	SHDMA_SLAVE_FSI2C_TX,
-	SHDMA_SLAVE_FSI2C_RX,
-	SHDMA_SLAVE_FSI2D_RX,
-};
-
-/*
- *		SH73A0 IRQ LOCATION TABLE
- *
- * 416	-----------------------------------------
- *		IRQ0-IRQ15
- * 431	-----------------------------------------
- * ...
- * 448	-----------------------------------------
- *		sh73a0-intcs
- *		sh73a0-intca-irq-pins
- * 680	-----------------------------------------
- * ...
- * 700	-----------------------------------------
- *		sh73a0-pint0
- * 731	-----------------------------------------
- * 732	-----------------------------------------
- *		sh73a0-pint1
- * 739	-----------------------------------------
- * ...
- * 800	-----------------------------------------
- *		IRQ16-IRQ31
- * 815	-----------------------------------------
- * ...
- * 928	-----------------------------------------
- *		sh73a0-intca-irq-pins
- * 943	-----------------------------------------
- */
-
-/* PINT interrupts are located@Linux IRQ 700 and up */
-#define SH73A0_PINT0_IRQ(irq) ((irq) + 700)
-#define SH73A0_PINT1_IRQ(irq) ((irq) + 732)
-
-extern void sh73a0_init_irq(void);
-extern void sh73a0_init_irq_dt(void);
-extern void sh73a0_map_io(void);
-extern void sh73a0_earlytimer_init(void);
-extern void sh73a0_add_early_devices(void);
-extern void sh73a0_add_standard_devices(void);
-extern void sh73a0_clock_init(void);
-extern void sh73a0_pinmux_init(void);
-extern void sh73a0_pm_init(void);
-extern struct clk sh73a0_extal1_clk;
-extern struct clk sh73a0_extal2_clk;
-extern struct clk sh73a0_extcki_clk;
-extern struct clk sh73a0_extalr_clk;
 extern struct smp_operations sh73a0_smp_ops;
 
 #endif /* __ASM_SH73A0_H__ */
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 2106d6b76a06..d03aa11fb46d 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -33,14 +33,6 @@
 
 #define SH73A0_SCU_BASE 0xf0000000
 
-#if defined(CONFIG_HAVE_ARM_TWD) && !defined(CONFIG_ARCH_MULTIPLATFORM)
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, SH73A0_SCU_BASE + 0x600, 29);
-void __init sh73a0_register_twd(void)
-{
-	twd_local_timer_register(&twd_local_timer);
-}
-#endif
-
 static int sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned int lcpu = cpu_logical_map(cpu);
-- 
2.1.4

[PATCH 08/16] ARM: shmobile: Remove legacy board code for Armadillo-800 EVA

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The Armadillo-800 EVA board is sufficiently supported by DT-based and
board-less R-Mobile A1 (r8a7740) multiplatform kernels, and board
staging code. Hence remove the legacy board code to reduce maintenance
effort.

Lacking areas are:
  - USB (it doesn't work in legacy, neither),
  - HDMI (it doesn't work in legacy, neither),
  - Camera (we don't care),
  - DMAC/IPMMU (no DT bindings are planned).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig                 |    9 -
 arch/arm/mach-shmobile/Makefile                |    1 -
 arch/arm/mach-shmobile/Makefile.boot           |    1 -
 arch/arm/mach-shmobile/board-armadillo800eva.c | 1365 ------------------------
 4 files changed, 1376 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/board-armadillo800eva.c

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 8e82ef4abdce..49d455c0c39e 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -124,15 +124,6 @@ config ARCH_R8A7779
 
 comment "Renesas ARM SoCs Board Type"
 
-config MACH_ARMADILLO800EVA
-	bool "Armadillo-800 EVA board"
-	depends on ARCH_R8A7740
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SMSC_PHY if SH_ETH
-	select SND_SOC_WM8978 if SND_SIMPLE_CARD && I2C
-	select USE_OF
-
 config MACH_BOCKW
 	bool "BOCK-W platform"
 	depends on ARCH_R8A7778
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 28e0f05a8577..548536fcb3b1 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -56,7 +56,6 @@ else
 obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
 obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
-obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
 endif
 
 # Framework support
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 2269b1c3c30b..14cdfc0ed075 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -1,6 +1,5 @@
 # per-board load address for uImage
 loadaddr-y	:-loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
 loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
deleted file mode 100644
index bf37e3c532f6..000000000000
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ /dev/null
@@ -1,1365 +0,0 @@
-/*
- * armadillo 800 eva board support
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/i2c-gpio.h>
-#include <linux/input.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_data/st1232_pdata.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/reboot.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/gpio-regulator.h>
-#include <linux/regulator/machine.h>
-#include <linux/sh_eth.h>
-#include <linux/usb/renesas_usbhs.h>
-#include <linux/videodev2.h>
-
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/page.h>
-#include <media/mt9t112.h>
-#include <media/sh_mobile_ceu.h>
-#include <media/soc_camera.h>
-#include <sound/sh_fsi.h>
-#include <sound/simple_card.h>
-#include <video/sh_mobile_hdmi.h>
-#include <video/sh_mobile_lcdc.h>
-
-#include "common.h"
-#include "irqs.h"
-#include "pm-rmobile.h"
-#include "r8a7740.h"
-#include "sh-gpio.h"
-
-/*
- * CON1		Camera Module
- * CON2		Extension Bus
- * CON3		HDMI Output
- * CON4		Composite Video Output
- * CON5		H-UDI JTAG
- * CON6		ARM JTAG
- * CON7		SD1
- * CON8		SD2
- * CON9		RTC BackUp
- * CON10	Monaural Mic Input
- * CON11	Stereo Headphone Output
- * CON12	Audio Line Output(L)
- * CON13	Audio Line Output(R)
- * CON14	AWL13 Module
- * CON15	Extension
- * CON16	LCD1
- * CON17	LCD2
- * CON19	Power Input
- * CON20	USB1
- * CON21	USB2
- * CON22	Serial
- * CON23	LAN
- * CON24	USB3
- * LED1		Camera LED(Yellow)
- * LED2		Power LED (Green)
- * ED3-LED6	User LED(Yellow)
- * LED7		LAN link LED(Green)
- * LED8		LAN activity LED(Yellow)
- */
-
-/*
- * DipSwitch
- *
- *                    SW1
- *
- * -12345678-+---------------+----------------------------
- *  1        | boot          | hermit
- *  0        | boot          | OS auto boot
- * -12345678-+---------------+----------------------------
- *   00      | boot device   | eMMC
- *   10      | boot device   | SDHI0 (CON7)
- *   01      | boot device   | -
- *   11      | boot device   | Extension Buss (CS0)
- * -12345678-+---------------+----------------------------
- *     0     | Extension Bus | D8-D15 disable, eMMC enable
- *     1     | Extension Bus | D8-D15 enable,  eMMC disable
- * -12345678-+---------------+----------------------------
- *      0    | SDHI1         | COM8 disable, COM14 enable
- *      1    | SDHI1         | COM8 enable,  COM14 disable
- * -12345678-+---------------+----------------------------
- *       0   | USB0          | COM20 enable,  COM24 disable
- *       1   | USB0          | COM20 disable, COM24 enable
- * -12345678-+---------------+----------------------------
- *        00 | JTAG          | SH-X2
- *        10 | JTAG          | ARM
- *        01 | JTAG          | -
- *        11 | JTAG          | Boundary Scan
- *-----------+---------------+----------------------------
- */
-
-/*
- * FSI-WM8978
- *
- * this command is required when playback.
- *
- * # amixer set "Headphone" 50
- *
- * this command is required when capture.
- *
- * # amixer set "Input PGA" 15
- * # amixer set "Left Input Mixer MicP" on
- * # amixer set "Left Input Mixer MicN" on
- * # amixer set "Right Input Mixer MicN" on
- * # amixer set "Right Input Mixer MicP" on
- */
-
-/*
- * USB function
- *
- * When you use USB Function,
- * set SW1.6 ON, and connect cable to CN24.
- *
- * USBF needs workaround on R8A7740 chip.
- * These are a little bit complex.
- * see
- *	usbhsf_power_ctrl()
- */
-#define IRQ7		irq_pin(7)
-#define USBCR1		IOMEM(0xe605810a)
-#define USBH		0xC6700000
-#define USBH_USBCTR	0x10834
-
-struct usbhsf_private {
-	struct clk *phy;
-	struct clk *usb24;
-	struct clk *pci;
-	struct clk *func;
-	struct clk *host;
-	void __iomem *usbh_base;
-	struct renesas_usbhs_platform_info info;
-};
-
-#define usbhsf_get_priv(pdev)				\
-	container_of(renesas_usbhs_get_info(pdev),	\
-		     struct usbhsf_private, info)
-
-static int usbhsf_get_id(struct platform_device *pdev)
-{
-	return USBHS_GADGET;
-}
-
-static int usbhsf_power_ctrl(struct platform_device *pdev,
-			      void __iomem *base, int enable)
-{
-	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
-
-	/*
-	 * Work around for USB Function.
-	 * It needs USB host clock, and settings
-	 */
-	if (enable) {
-		/*
-		 * enable all the related usb clocks
-		 * for usb workaround
-		 */
-		clk_enable(priv->usb24);
-		clk_enable(priv->pci);
-		clk_enable(priv->host);
-		clk_enable(priv->func);
-		clk_enable(priv->phy);
-
-		/*
-		 * set USBCR1
-		 *
-		 * Port1 is driven by USB function,
-		 * Port2 is driven by USB HOST
-		 * One HOST (Port1 or Port2 is HOST)
-		 * USB PLL input clock = 24MHz
-		 */
-		__raw_writew(0xd750, USBCR1);
-		mdelay(1);
-
-		/*
-		 * start USB Host
-		 */
-		__raw_writel(0x0000000c, priv->usbh_base + USBH_USBCTR);
-		__raw_writel(0x00000008, priv->usbh_base + USBH_USBCTR);
-		mdelay(10);
-
-		/*
-		 * USB PHY Power ON
-		 */
-		__raw_writew(0xd770, USBCR1);
-		__raw_writew(0x4000, base + 0x102); /* USBF :: SUSPMODE */
-
-	} else {
-		__raw_writel(0x0000010f, priv->usbh_base + USBH_USBCTR);
-		__raw_writew(0xd7c0, USBCR1); /* GPIO */
-
-		clk_disable(priv->phy);
-		clk_disable(priv->func);	/* usb work around */
-		clk_disable(priv->host);	/* usb work around */
-		clk_disable(priv->pci);		/* usb work around */
-		clk_disable(priv->usb24);	/* usb work around */
-	}
-
-	return 0;
-}
-
-static int usbhsf_get_vbus(struct platform_device *pdev)
-{
-	return gpio_get_value(209);
-}
-
-static irqreturn_t usbhsf_interrupt(int irq, void *data)
-{
-	struct platform_device *pdev = data;
-
-	renesas_usbhs_call_notify_hotplug(pdev);
-
-	return IRQ_HANDLED;
-}
-
-static int usbhsf_hardware_exit(struct platform_device *pdev)
-{
-	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
-
-	if (!IS_ERR(priv->phy))
-		clk_put(priv->phy);
-	if (!IS_ERR(priv->usb24))
-		clk_put(priv->usb24);
-	if (!IS_ERR(priv->pci))
-		clk_put(priv->pci);
-	if (!IS_ERR(priv->host))
-		clk_put(priv->host);
-	if (!IS_ERR(priv->func))
-		clk_put(priv->func);
-	if (priv->usbh_base)
-		iounmap(priv->usbh_base);
-
-	priv->phy	= NULL;
-	priv->usb24	= NULL;
-	priv->pci	= NULL;
-	priv->host	= NULL;
-	priv->func	= NULL;
-	priv->usbh_base	= NULL;
-
-	free_irq(IRQ7, pdev);
-
-	return 0;
-}
-
-static int usbhsf_hardware_init(struct platform_device *pdev)
-{
-	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
-	int ret;
-
-	priv->phy	= clk_get(&pdev->dev, "phy");
-	priv->usb24	= clk_get(&pdev->dev, "usb24");
-	priv->pci	= clk_get(&pdev->dev, "pci");
-	priv->func	= clk_get(&pdev->dev, "func");
-	priv->host	= clk_get(&pdev->dev, "host");
-	priv->usbh_base	= ioremap_nocache(USBH, 0x20000);
-
-	if (IS_ERR(priv->phy)		||
-	    IS_ERR(priv->usb24)		||
-	    IS_ERR(priv->pci)		||
-	    IS_ERR(priv->host)		||
-	    IS_ERR(priv->func)		||
-	    !priv->usbh_base) {
-		dev_err(&pdev->dev, "USB clock setting failed\n");
-		usbhsf_hardware_exit(pdev);
-		return -EIO;
-	}
-
-	ret = request_irq(IRQ7, usbhsf_interrupt, IRQF_TRIGGER_NONE,
-			  dev_name(&pdev->dev), pdev);
-	if (ret) {
-		dev_err(&pdev->dev, "request_irq err\n");
-		return ret;
-	}
-	irq_set_irq_type(IRQ7, IRQ_TYPE_EDGE_BOTH);
-
-	/* usb24 use 1/1 of parent clock (= usb24s = 24MHz) */
-	clk_set_rate(priv->usb24,
-		     clk_get_rate(clk_get_parent(priv->usb24)));
-
-	return 0;
-}
-
-static struct usbhsf_private usbhsf_private = {
-	.info = {
-		.platform_callback = {
-			.get_id		= usbhsf_get_id,
-			.get_vbus	= usbhsf_get_vbus,
-			.hardware_init	= usbhsf_hardware_init,
-			.hardware_exit	= usbhsf_hardware_exit,
-			.power_ctrl	= usbhsf_power_ctrl,
-		},
-		.driver_param = {
-			.buswait_bwait		= 5,
-			.detection_delay	= 5,
-			.d0_rx_id	= SHDMA_SLAVE_USBHS_RX,
-			.d1_tx_id	= SHDMA_SLAVE_USBHS_TX,
-		},
-	}
-};
-
-static struct resource usbhsf_resources[] = {
-	{
-		.name	= "USBHS",
-		.start	= 0xe6890000,
-		.end	= 0xe6890104 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= gic_spi(51),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usbhsf_device = {
-	.name	= "renesas_usbhs",
-	.dev = {
-		.platform_data = &usbhsf_private.info,
-	},
-	.id = -1,
-	.num_resources	= ARRAY_SIZE(usbhsf_resources),
-	.resource	= usbhsf_resources,
-};
-
-/* Ether */
-static struct sh_eth_plat_data sh_eth_platdata = {
-	.phy			= 0x00, /* LAN8710A */
-	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
-	.phy_interface		= PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource sh_eth_resources[] = {
-	{
-		.start	= 0xe9a00000,
-		.end	= 0xe9a00800 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= 0xe9a01800,
-		.end	= 0xe9a02000 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= gic_spi(110),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sh_eth_device = {
-	.name = "r8a7740-gether",
-	.id = -1,
-	.dev = {
-		.platform_data = &sh_eth_platdata,
-		.dma_mask = &sh_eth_device.dev.coherent_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource = sh_eth_resources,
-	.num_resources = ARRAY_SIZE(sh_eth_resources),
-};
-
-/* PWM */
-static struct resource pwm_resources[] = {
-	[0] = {
-		.start = 0xe6600000,
-		.end = 0xe66000ff,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device pwm_device = {
-	.name = "renesas-tpu-pwm",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(pwm_resources),
-	.resource = pwm_resources,
-};
-
-static struct pwm_lookup pwm_lookup[] = {
-	PWM_LOOKUP("renesas-tpu-pwm", 2, "pwm-backlight.0", NULL,
-		   33333, PWM_POLARITY_INVERSED),
-};
-
-/* LCDC and backlight */
-static struct platform_pwm_backlight_data pwm_backlight_data = {
-	.lth_brightness = 50,
-	.max_brightness = 255,
-	.dft_brightness = 255,
-	.pwm_period_ns = 33333, /* 30kHz */
-	.enable_gpio = 61,
-};
-
-static struct platform_device pwm_backlight_device = {
-	.name = "pwm-backlight",
-	.dev = {
-		.platform_data = &pwm_backlight_data,
-	},
-};
-
-static struct fb_videomode lcdc0_mode = {
-	.name		= "AMPIER/AM-800480",
-	.xres		= 800,
-	.yres		= 480,
-	.left_margin	= 88,
-	.right_margin	= 40,
-	.hsync_len	= 128,
-	.upper_margin	= 20,
-	.lower_margin	= 5,
-	.vsync_len	= 5,
-	.sync		= 0,
-};
-
-static struct sh_mobile_lcdc_info lcdc0_info = {
-	.clock_source	= LCDC_CLK_BUS,
-	.ch[0] = {
-		.chan		= LCDC_CHAN_MAINLCD,
-		.fourcc		= V4L2_PIX_FMT_RGB565,
-		.interface_type	= RGB24,
-		.clock_divider	= 5,
-		.flags		= 0,
-		.lcd_modes	= &lcdc0_mode,
-		.num_modes	= 1,
-		.panel_cfg = {
-			.width	= 111,
-			.height = 68,
-		},
-	},
-};
-
-static struct resource lcdc0_resources[] = {
-	[0] = {
-		.name	= "LCD0",
-		.start	= 0xfe940000,
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(177),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc0_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc0_resources),
-	.resource	= lcdc0_resources,
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &lcdc0_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-/*
- * LCDC1/HDMI
- */
-static struct sh_mobile_hdmi_info hdmi_info = {
-	.flags		= HDMI_OUTPUT_PUSH_PULL |
-			  HDMI_OUTPUT_POLARITY_HI |
-			  HDMI_32BIT_REG |
-			  HDMI_HAS_HTOP1 |
-			  HDMI_SND_SRC_SPDIF,
-};
-
-static struct resource hdmi_resources[] = {
-	[0] = {
-		.name	= "HDMI",
-		.start	= 0xe6be0000,
-		.end	= 0xe6be03ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(131),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= "HDMI emma3pf",
-		.start	= 0xe6be4000,
-		.end	= 0xe6be43ff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device hdmi_device = {
-	.name		= "sh-mobile-hdmi",
-	.num_resources	= ARRAY_SIZE(hdmi_resources),
-	.resource	= hdmi_resources,
-	.id             = -1,
-	.dev	= {
-		.platform_data	= &hdmi_info,
-	},
-};
-
-static const struct fb_videomode lcdc1_mode = {
-	.name		= "HDMI 720p",
-	.xres		= 1280,
-	.yres		= 720,
-	.pixclock	= 13468,
-	.left_margin	= 220,
-	.right_margin	= 110,
-	.hsync_len	= 40,
-	.upper_margin	= 20,
-	.lower_margin	= 5,
-	.vsync_len	= 5,
-	.refresh	= 60,
-	.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
-};
-
-static struct sh_mobile_lcdc_info hdmi_lcdc_info = {
-	.clock_source	= LCDC_CLK_PERIPHERAL, /* HDMI clock */
-	.ch[0] = {
-		.chan			= LCDC_CHAN_MAINLCD,
-		.fourcc			= V4L2_PIX_FMT_RGB565,
-		.interface_type		= RGB24,
-		.clock_divider		= 1,
-		.flags			= LCDC_FLAGS_DWPOL,
-		.lcd_modes		= &lcdc1_mode,
-		.num_modes		= 1,
-		.tx_dev			= &hdmi_device,
-		.panel_cfg = {
-			.width	= 1280,
-			.height = 720,
-		},
-	},
-};
-
-static struct resource hdmi_lcdc_resources[] = {
-	[0] = {
-		.name	= "LCDC1",
-		.start	= 0xfe944000,
-		.end	= 0xfe948000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(178),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device hdmi_lcdc_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(hdmi_lcdc_resources),
-	.resource	= hdmi_lcdc_resources,
-	.id		= 1,
-	.dev	= {
-		.platform_data	= &hdmi_lcdc_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-/* LEDS */
-static struct gpio_led gpio_leds[] = {
-	{
-		.name		= "LED3",
-		.gpio		= 102,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	}, {
-		.name		= "LED4",
-		.gpio		= 111,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	}, {
-		.name		= "LED5",
-		.gpio		= 110,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	}, {
-		.name		= "LED6",
-		.gpio		= 177,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-};
-
-static struct gpio_led_platform_data leds_gpio_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio_device = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &leds_gpio_info,
-	},
-};
-
-/* GPIO KEY */
-#define GPIO_KEY(c, g, d, ...) \
-	{ .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ }
-
-static struct gpio_keys_button gpio_buttons[] = {
-	GPIO_KEY(KEY_POWER,	99,	"SW3", .wakeup = 1),
-	GPIO_KEY(KEY_BACK,	100,	"SW4"),
-	GPIO_KEY(KEY_MENU,	97,	"SW5"),
-	GPIO_KEY(KEY_HOME,	98,	"SW6"),
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
-	.buttons	= gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
-	.name   = "gpio-keys",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &gpio_key_info,
-	},
-};
-
-/* Fixed 3.3V regulator to be used by SDHI1, MMCIF */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "sh_mmcif"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mmcif"),
-};
-
-/* Fixed 3.3V regulator used by LCD backlight */
-static struct regulator_consumer_supply fixed5v0_power_consumers[] = {
-	REGULATOR_SUPPLY("power", "pwm-backlight.0"),
-};
-
-/* Fixed 3.3V regulator to be used by SDHI0 */
-static struct regulator_consumer_supply vcc_sdhi0_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct regulator_init_data vcc_sdhi0_init_data = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(vcc_sdhi0_consumers),
-	.consumer_supplies      = vcc_sdhi0_consumers,
-};
-
-static struct fixed_voltage_config vcc_sdhi0_info = {
-	.supply_name = "SDHI0 Vcc",
-	.microvolts = 3300000,
-	.gpio = 75,
-	.enable_high = 1,
-	.init_data = &vcc_sdhi0_init_data,
-};
-
-static struct platform_device vcc_sdhi0 = {
-	.name = "reg-fixed-voltage",
-	.id   = 1,
-	.dev  = {
-		.platform_data = &vcc_sdhi0_info,
-	},
-};
-
-/* 1.8 / 3.3V SDHI0 VccQ regulator */
-static struct regulator_consumer_supply vccq_sdhi0_consumers[] = {
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct regulator_init_data vccq_sdhi0_init_data = {
-	.constraints = {
-		.input_uV	= 3300000,
-		.min_uV		= 1800000,
-		.max_uV         = 3300000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(vccq_sdhi0_consumers),
-	.consumer_supplies      = vccq_sdhi0_consumers,
-};
-
-static struct gpio vccq_sdhi0_gpios[] = {
-	{17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" },
-};
-
-static struct gpio_regulator_state vccq_sdhi0_states[] = {
-	{ .value = 3300000, .gpios = (0 << 0) },
-	{ .value = 1800000, .gpios = (1 << 0) },
-};
-
-static struct gpio_regulator_config vccq_sdhi0_info = {
-	.supply_name = "vqmmc",
-
-	.enable_gpio = 74,
-	.enable_high = 1,
-	.enabled_at_boot = 0,
-
-	.gpios = vccq_sdhi0_gpios,
-	.nr_gpios = ARRAY_SIZE(vccq_sdhi0_gpios),
-
-	.states = vccq_sdhi0_states,
-	.nr_states = ARRAY_SIZE(vccq_sdhi0_states),
-
-	.type = REGULATOR_VOLTAGE,
-	.init_data = &vccq_sdhi0_init_data,
-};
-
-static struct platform_device vccq_sdhi0 = {
-	.name = "gpio-regulator",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &vccq_sdhi0_info,
-	},
-};
-
-/* Fixed 3.3V regulator to be used by SDHI1 */
-static struct regulator_consumer_supply vcc_sdhi1_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
-};
-
-static struct regulator_init_data vcc_sdhi1_init_data = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(vcc_sdhi1_consumers),
-	.consumer_supplies      = vcc_sdhi1_consumers,
-};
-
-static struct fixed_voltage_config vcc_sdhi1_info = {
-	.supply_name = "SDHI1 Vcc",
-	.microvolts = 3300000,
-	.gpio = 16,
-	.enable_high = 1,
-	.init_data = &vcc_sdhi1_init_data,
-};
-
-static struct platform_device vcc_sdhi1 = {
-	.name = "reg-fixed-voltage",
-	.id   = 2,
-	.dev  = {
-		.platform_data = &vcc_sdhi1_info,
-	},
-};
-
-/* SDHI0 */
-static struct tmio_mmc_data sdhi0_info = {
-	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI0_TX,
-	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI0_RX,
-	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
-			  MMC_CAP_POWER_OFF_CARD,
-	.flags		= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
-	.cd_gpio	= 167,
-};
-
-static struct resource sdhi0_resources[] = {
-	{
-		.name	= "SDHI0",
-		.start	= 0xe6850000,
-		.end	= 0xe6850100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 * no SH_MOBILE_SDHI_IRQ_CARD_DETECT here
-	 */
-	{
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= gic_spi(118),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= gic_spi(119),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name		= "sh_mobile_sdhi",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &sdhi0_info,
-	},
-	.num_resources	= ARRAY_SIZE(sdhi0_resources),
-	.resource	= sdhi0_resources,
-};
-
-/* SDHI1 */
-static struct tmio_mmc_data sdhi1_info = {
-	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI1_TX,
-	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI1_RX,
-	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
-			  MMC_CAP_POWER_OFF_CARD,
-	.flags		= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
-	/* Port72 cannot generate IRQs, will be used in polling mode. */
-	.cd_gpio	= 72,
-};
-
-static struct resource sdhi1_resources[] = {
-	[0] = {
-		.name	= "SDHI1",
-		.start	= 0xe6860000,
-		.end	= 0xe6860100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(121),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= gic_spi(122),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= gic_spi(123),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi1_device = {
-	.name		= "sh_mobile_sdhi",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &sdhi1_info,
-	},
-	.num_resources	= ARRAY_SIZE(sdhi1_resources),
-	.resource	= sdhi1_resources,
-};
-
-static const struct pinctrl_map eva_sdhi1_pinctrl_map[] = {
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740",
-				  "sdhi1_data4", "sdhi1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740",
-				  "sdhi1_ctrl", "sdhi1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740",
-				  "sdhi1_cd", "sdhi1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740",
-				  "sdhi1_wp", "sdhi1"),
-};
-
-/* MMCIF */
-static struct sh_mmcif_plat_data sh_mmcif_plat = {
-	.sup_pclk	= 0,
-	.caps		= MMC_CAP_4_BIT_DATA |
-			  MMC_CAP_8_BIT_DATA |
-			  MMC_CAP_NONREMOVABLE,
-	.ccs_unsupported = true,
-	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
-	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct resource sh_mmcif_resources[] = {
-	[0] = {
-		.name	= "MMCIF",
-		.start	= 0xe6bd0000,
-		.end	= 0xe6bd0100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/* MMC ERR */
-		.start	= gic_spi(56),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* MMC NOR */
-		.start	= gic_spi(57),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sh_mmcif_device = {
-	.name		= "sh_mmcif",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &sh_mmcif_plat,
-	},
-	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
-	.resource	= sh_mmcif_resources,
-};
-
-/* Camera */
-static int mt9t111_power(struct device *dev, int mode)
-{
-	struct clk *mclk = clk_get(NULL, "video1");
-
-	if (IS_ERR(mclk)) {
-		dev_err(dev, "can't get video1 clock\n");
-		return -EINVAL;
-	}
-
-	if (mode) {
-		/* video1 (= CON1 camera) expect 24MHz */
-		clk_set_rate(mclk, clk_round_rate(mclk, 24000000));
-		clk_enable(mclk);
-		gpio_set_value(158, 1);
-	} else {
-		gpio_set_value(158, 0);
-		clk_disable(mclk);
-	}
-
-	clk_put(mclk);
-
-	return 0;
-}
-
-static struct i2c_board_info i2c_camera_mt9t111 = {
-	I2C_BOARD_INFO("mt9t112", 0x3d),
-};
-
-static struct mt9t112_camera_info mt9t111_info = {
-	.divider = { 16, 0, 0, 7, 0, 10, 14, 7, 7 },
-};
-
-static struct soc_camera_link mt9t111_link = {
-	.i2c_adapter_id	= 0,
-	.bus_id		= 0,
-	.board_info	= &i2c_camera_mt9t111,
-	.power		= mt9t111_power,
-	.priv		= &mt9t111_info,
-};
-
-static struct platform_device camera_device = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &mt9t111_link,
-	},
-};
-
-/* CEU0 */
-static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
-	.flags = SH_CEU_FLAG_LOWER_8BIT,
-};
-
-static struct resource ceu0_resources[] = {
-	[0] = {
-		.name	= "CEU",
-		.start	= 0xfe910000,
-		.end	= 0xfe91009f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(160),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* place holder for contiguous memory */
-	},
-};
-
-static struct platform_device ceu0_device = {
-	.name		= "sh_mobile_ceu",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(ceu0_resources),
-	.resource	= ceu0_resources,
-	.dev	= {
-		.platform_data		= &sh_mobile_ceu0_info,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-/* FSI */
-static struct sh_fsi_platform_info fsi_info = {
-	/* FSI-WM8978 */
-	.port_a = {
-		.tx_id = SHDMA_SLAVE_FSIA_TX,
-	},
-	/* FSI-HDMI */
-	.port_b = {
-		.flags		= SH_FSI_FMT_SPDIF |
-				  SH_FSI_ENABLE_STREAM_MODE |
-				  SH_FSI_CLK_CPG,
-		.tx_id		= SHDMA_SLAVE_FSIB_TX,
-	}
-};
-
-static struct resource fsi_resources[] = {
-	[0] = {
-		.name	= "FSI",
-		.start	= 0xfe1f0000,
-		.end	= 0xfe1f0400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(9),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device fsi_device = {
-	.name		= "sh_fsi2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(fsi_resources),
-	.resource	= fsi_resources,
-	.dev	= {
-		.platform_data	= &fsi_info,
-	},
-};
-
-/* FSI-WM8978 */
-static struct asoc_simple_card_info fsi_wm8978_info = {
-	.name		= "wm8978",
-	.card		= "FSI2A-WM8978",
-	.codec		= "wm8978.0-001a",
-	.platform	= "sh_fsi2",
-	.daifmt		= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM,
-	.cpu_dai = {
-		.name	= "fsia-dai",
-	},
-	.codec_dai = {
-		.name	= "wm8978-hifi",
-		.sysclk	= 12288000,
-	},
-};
-
-static struct platform_device fsi_wm8978_device = {
-	.name	= "asoc-simple-card",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &fsi_wm8978_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &fsi_wm8978_device.dev.coherent_dma_mask,
-	},
-};
-
-/* FSI-HDMI */
-static struct asoc_simple_card_info fsi2_hdmi_info = {
-	.name		= "HDMI",
-	.card		= "FSI2B-HDMI",
-	.codec		= "sh-mobile-hdmi",
-	.platform	= "sh_fsi2",
-	.daifmt		= SND_SOC_DAIFMT_CBS_CFS,
-	.cpu_dai = {
-		.name	= "fsib-dai",
-	},
-	.codec_dai = {
-		.name = "sh_mobile_hdmi-hifi",
-	},
-};
-
-static struct platform_device fsi_hdmi_device = {
-	.name	= "asoc-simple-card",
-	.id	= 1,
-	.dev	= {
-		.platform_data	= &fsi2_hdmi_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &fsi_hdmi_device.dev.coherent_dma_mask,
-	},
-};
-
-/* RTC: RTC connects i2c-gpio. */
-static struct i2c_gpio_platform_data i2c_gpio_data = {
-	.sda_pin	= 208,
-	.scl_pin	= 91,
-	.udelay		= 5, /* 100 kHz */
-};
-
-static struct platform_device i2c_gpio_device = {
-	.name = "i2c-gpio",
-	.id = 2,
-	.dev = {
-		.platform_data = &i2c_gpio_data,
-	},
-};
-
-/* I2C */
-static struct st1232_pdata st1232_i2c0_pdata = {
-	.reset_gpio = 166,
-};
-
-static struct i2c_board_info i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("st1232-ts", 0x55),
-		.irq = irq_pin(10),
-		.platform_data = &st1232_i2c0_pdata,
-	},
-	{
-		I2C_BOARD_INFO("wm8978", 0x1a),
-	},
-};
-
-static struct i2c_board_info i2c2_devices[] = {
-	{
-		I2C_BOARD_INFO("s35390a", 0x30),
-		.type = "s35390a",
-	},
-};
-
-/*
- * board devices
- */
-static struct platform_device *eva_devices[] __initdata = {
-	&lcdc0_device,
-	&pwm_device,
-	&pwm_backlight_device,
-	&leds_gpio_device,
-	&gpio_keys_device,
-	&sh_eth_device,
-	&vcc_sdhi0,
-	&vccq_sdhi0,
-	&sdhi0_device,
-	&sh_mmcif_device,
-	&hdmi_device,
-	&hdmi_lcdc_device,
-	&camera_device,
-	&ceu0_device,
-	&fsi_device,
-	&fsi_wm8978_device,
-	&fsi_hdmi_device,
-	&i2c_gpio_device,
-};
-
-static const struct pinctrl_map eva_pinctrl_map[] = {
-	/* CEU0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
-				  "ceu0_data_0_7", "ceu0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
-				  "ceu0_clk_0", "ceu0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
-				  "ceu0_sync", "ceu0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
-				  "ceu0_field", "ceu0"),
-	/* FSIA */
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
-				  "fsia_sclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
-				  "fsia_mclk_out", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
-				  "fsia_data_in_1", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
-				  "fsia_data_out_0", "fsia"),
-	/* FSIB */
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740",
-				  "fsib_mclk_in", "fsib"),
-	/* GETHER */
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
-				  "gether_mii", "gether"),
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
-				  "gether_int", "gether"),
-	/* HDMI */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740",
-				  "hdmi", "hdmi"),
-	/* LCD0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
-				  "lcd0_data24_0", "lcd0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
-				  "lcd0_lclk_1", "lcd0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
-				  "lcd0_sync", "lcd0"),
-	/* MMCIF */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740",
-				  "mmc0_data8_1", "mmc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740",
-				  "mmc0_ctrl_1", "mmc0"),
-	/* SCIFA1 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740",
-				  "scifa1_data", "scifa1"),
-	/* SDHI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740",
-				  "sdhi0_wp", "sdhi0"),
-	/* ST1232 */
-	PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-r8a7740",
-				  "intc_irq10", "intc"),
-	/* TPU0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("renesas-tpu-pwm", "pfc-r8a7740",
-				  "tpu0_to2_1", "tpu0"),
-	/* USBHS */
-	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7740",
-				  "intc_irq7_1", "intc"),
-};
-
-static void __init eva_clock_init(void)
-{
-	struct clk *system	= clk_get(NULL, "system_clk");
-	struct clk *xtal1	= clk_get(NULL, "extal1");
-	struct clk *usb24s	= clk_get(NULL, "usb24s");
-	struct clk *fsibck	= clk_get(NULL, "fsibck");
-
-	if (IS_ERR(system)	||
-	    IS_ERR(xtal1)	||
-	    IS_ERR(usb24s)	||
-	    IS_ERR(fsibck)) {
-		pr_err("armadillo800eva board clock init failed\n");
-		goto clock_error;
-	}
-
-	/* armadillo 800 eva extal1 is 24MHz */
-	clk_set_rate(xtal1, 24000000);
-
-	/* usb24s use extal1 (= system) clock (= 24MHz) */
-	clk_set_parent(usb24s, system);
-
-	/* FSIBCK is 12.288MHz, and it is parent of FSI-B */
-	clk_set_rate(fsibck, 12288000);
-
-clock_error:
-	if (!IS_ERR(system))
-		clk_put(system);
-	if (!IS_ERR(xtal1))
-		clk_put(xtal1);
-	if (!IS_ERR(usb24s))
-		clk_put(usb24s);
-	if (!IS_ERR(fsibck))
-		clk_put(fsibck);
-}
-
-/*
- * board init
- */
-#define GPIO_PORT7CR	IOMEM(0xe6050007)
-#define GPIO_PORT8CR	IOMEM(0xe6050008)
-static void __init eva_init(void)
-{
-	static struct pm_domain_device domain_devices[] __initdata = {
-		{ "A4LC", &lcdc0_device },
-		{ "A4LC", &hdmi_lcdc_device },
-		{ "A4MP", &hdmi_device },
-		{ "A4MP", &fsi_device },
-		{ "A4R",  &ceu0_device },
-		{ "A4S",  &sh_eth_device },
-		{ "A3SP", &pwm_device },
-		{ "A3SP", &sdhi0_device },
-		{ "A3SP", &sh_mmcif_device },
-	};
-	struct platform_device *usb = NULL, *sdhi1 = NULL;
-
-	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
-				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-	regulator_register_always_on(3, "fixed-5.0V", fixed5v0_power_consumers,
-				     ARRAY_SIZE(fixed5v0_power_consumers), 5000000);
-
-	pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map));
-	pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
-
-	r8a7740_pinmux_init();
-	r8a7740_meram_workaround();
-
-	/* GETHER */
-	gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */
-
-	/* USB */
-	gpio_request_one(159, GPIOF_IN, NULL); /* USB_DEVICE_MODE */
-
-	if (gpio_get_value(159)) {
-		/* USB Host */
-	} else {
-		/* USB Func */
-		/*
-		 * The USBHS interrupt handlers needs to read the IRQ pin value
-		 * (HI/LOW) to diffentiate USB connection and disconnection
-		 * events (usbhsf_get_vbus()). We thus need to select both the
-		 * intc_irq7_1 pin group and GPIO 209 here.
-		 */
-		gpio_request_one(209, GPIOF_IN, NULL);
-
-		platform_device_register(&usbhsf_device);
-		usb = &usbhsf_device;
-	}
-
-	/* CON1/CON15 Camera */
-	gpio_request_one(173, GPIOF_OUT_INIT_LOW, NULL);  /* STANDBY */
-	gpio_request_one(172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */
-	/* see mt9t111_power() */
-	gpio_request_one(158, GPIOF_OUT_INIT_LOW, NULL);  /* CAM_PON */
-
-	/* FSI-WM8978 */
-	gpio_request(7, NULL);
-	gpio_request(8, NULL);
-	gpio_direction_none(GPIO_PORT7CR); /* FSIAOBT needs no direction */
-	gpio_direction_none(GPIO_PORT8CR); /* FSIAOLR needs no direction */
-
-	/*
-	 * CAUTION
-	 *
-	 * DBGMD/LCDC0/FSIA MUX
-	 * DBGMD_SELECT_B should be set after setting PFC Function.
-	 */
-	gpio_request_one(176, GPIOF_OUT_INIT_HIGH, NULL);
-
-	/*
-	 * We can switch CON8/CON14 by SW1.5,
-	 * but it needs after DBGMD_SELECT_B
-	 */
-	gpio_request_one(6, GPIOF_IN, NULL);
-	if (gpio_get_value(6)) {
-		/* CON14 enable */
-	} else {
-		/* CON8 (SDHI1) enable */
-		pinctrl_register_mappings(eva_sdhi1_pinctrl_map,
-					  ARRAY_SIZE(eva_sdhi1_pinctrl_map));
-
-		platform_device_register(&vcc_sdhi1);
-		platform_device_register(&sdhi1_device);
-		sdhi1 = &sdhi1_device;
-	}
-
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Shared attribute override enable, 32K*8way */
-	l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff);
-#endif
-
-	i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
-	i2c_register_board_info(2, i2c2_devices, ARRAY_SIZE(i2c2_devices));
-
-	r8a7740_add_standard_devices();
-
-	platform_add_devices(eva_devices,
-			     ARRAY_SIZE(eva_devices));
-
-	rmobile_add_devices_to_domains(domain_devices,
-				       ARRAY_SIZE(domain_devices));
-	if (usb)
-		rmobile_add_device_to_domain("A3SP", usb);
-	if (sdhi1)
-		rmobile_add_device_to_domain("A3SP", sdhi1);
-
-	r8a7740_pm_init();
-}
-
-static void __init eva_earlytimer_init(void)
-{
-	r8a7740_clock_init(MD_CK0 | MD_CK2);
-	shmobile_earlytimer_init();
-
-	/* the rate of extal1 clock must be set before late_time_init */
-	eva_clock_init();
-}
-
-#define RESCNT2 IOMEM(0xe6188020)
-static void eva_restart(enum reboot_mode mode, const char *cmd)
-{
-	/* Do soft power on reset */
-	writel((1 << 31), RESCNT2);
-}
-
-static const char *eva_boards_compat_dt[] __initdata = {
-	"renesas,armadillo800eva",
-	NULL,
-};
-
-DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
-	.map_io		= r8a7740_map_io,
-	.init_early	= r8a7740_add_early_devices,
-	.init_irq	= r8a7740_init_irq_of,
-	.init_machine	= eva_init,
-	.init_late	= shmobile_init_late,
-	.init_time	= eva_earlytimer_init,
-	.dt_compat	= eva_boards_compat_dt,
-	.restart	= eva_restart,
-MACHINE_END
-- 
2.1.4

[PATCH 08/16] ARM: shmobile: Remove legacy board code for Armadillo-800 EVA

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The Armadillo-800 EVA board is sufficiently supported by DT-based and
board-less R-Mobile A1 (r8a7740) multiplatform kernels, and board
staging code. Hence remove the legacy board code to reduce maintenance
effort.

Lacking areas are:
  - USB (it doesn't work in legacy, neither),
  - HDMI (it doesn't work in legacy, neither),
  - Camera (we don't care),
  - DMAC/IPMMU (no DT bindings are planned).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig                 |    9 -
 arch/arm/mach-shmobile/Makefile                |    1 -
 arch/arm/mach-shmobile/Makefile.boot           |    1 -
 arch/arm/mach-shmobile/board-armadillo800eva.c | 1365 ------------------------
 4 files changed, 1376 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/board-armadillo800eva.c

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 8e82ef4abdce..49d455c0c39e 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -124,15 +124,6 @@ config ARCH_R8A7779
 
 comment "Renesas ARM SoCs Board Type"
 
-config MACH_ARMADILLO800EVA
-	bool "Armadillo-800 EVA board"
-	depends on ARCH_R8A7740
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SMSC_PHY if SH_ETH
-	select SND_SOC_WM8978 if SND_SIMPLE_CARD && I2C
-	select USE_OF
-
 config MACH_BOCKW
 	bool "BOCK-W platform"
 	depends on ARCH_R8A7778
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 28e0f05a8577..548536fcb3b1 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -56,7 +56,6 @@ else
 obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
 obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
-obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
 endif
 
 # Framework support
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 2269b1c3c30b..14cdfc0ed075 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -1,6 +1,5 @@
 # per-board load address for uImage
 loadaddr-y	:=
-loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
 loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
deleted file mode 100644
index bf37e3c532f6..000000000000
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ /dev/null
@@ -1,1365 +0,0 @@
-/*
- * armadillo 800 eva board support
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/i2c-gpio.h>
-#include <linux/input.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_data/st1232_pdata.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/reboot.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/gpio-regulator.h>
-#include <linux/regulator/machine.h>
-#include <linux/sh_eth.h>
-#include <linux/usb/renesas_usbhs.h>
-#include <linux/videodev2.h>
-
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/page.h>
-#include <media/mt9t112.h>
-#include <media/sh_mobile_ceu.h>
-#include <media/soc_camera.h>
-#include <sound/sh_fsi.h>
-#include <sound/simple_card.h>
-#include <video/sh_mobile_hdmi.h>
-#include <video/sh_mobile_lcdc.h>
-
-#include "common.h"
-#include "irqs.h"
-#include "pm-rmobile.h"
-#include "r8a7740.h"
-#include "sh-gpio.h"
-
-/*
- * CON1		Camera Module
- * CON2		Extension Bus
- * CON3		HDMI Output
- * CON4		Composite Video Output
- * CON5		H-UDI JTAG
- * CON6		ARM JTAG
- * CON7		SD1
- * CON8		SD2
- * CON9		RTC BackUp
- * CON10	Monaural Mic Input
- * CON11	Stereo Headphone Output
- * CON12	Audio Line Output(L)
- * CON13	Audio Line Output(R)
- * CON14	AWL13 Module
- * CON15	Extension
- * CON16	LCD1
- * CON17	LCD2
- * CON19	Power Input
- * CON20	USB1
- * CON21	USB2
- * CON22	Serial
- * CON23	LAN
- * CON24	USB3
- * LED1		Camera LED(Yellow)
- * LED2		Power LED (Green)
- * ED3-LED6	User LED(Yellow)
- * LED7		LAN link LED(Green)
- * LED8		LAN activity LED(Yellow)
- */
-
-/*
- * DipSwitch
- *
- *                    SW1
- *
- * -12345678-+---------------+----------------------------
- *  1        | boot          | hermit
- *  0        | boot          | OS auto boot
- * -12345678-+---------------+----------------------------
- *   00      | boot device   | eMMC
- *   10      | boot device   | SDHI0 (CON7)
- *   01      | boot device   | -
- *   11      | boot device   | Extension Buss (CS0)
- * -12345678-+---------------+----------------------------
- *     0     | Extension Bus | D8-D15 disable, eMMC enable
- *     1     | Extension Bus | D8-D15 enable,  eMMC disable
- * -12345678-+---------------+----------------------------
- *      0    | SDHI1         | COM8 disable, COM14 enable
- *      1    | SDHI1         | COM8 enable,  COM14 disable
- * -12345678-+---------------+----------------------------
- *       0   | USB0          | COM20 enable,  COM24 disable
- *       1   | USB0          | COM20 disable, COM24 enable
- * -12345678-+---------------+----------------------------
- *        00 | JTAG          | SH-X2
- *        10 | JTAG          | ARM
- *        01 | JTAG          | -
- *        11 | JTAG          | Boundary Scan
- *-----------+---------------+----------------------------
- */
-
-/*
- * FSI-WM8978
- *
- * this command is required when playback.
- *
- * # amixer set "Headphone" 50
- *
- * this command is required when capture.
- *
- * # amixer set "Input PGA" 15
- * # amixer set "Left Input Mixer MicP" on
- * # amixer set "Left Input Mixer MicN" on
- * # amixer set "Right Input Mixer MicN" on
- * # amixer set "Right Input Mixer MicP" on
- */
-
-/*
- * USB function
- *
- * When you use USB Function,
- * set SW1.6 ON, and connect cable to CN24.
- *
- * USBF needs workaround on R8A7740 chip.
- * These are a little bit complex.
- * see
- *	usbhsf_power_ctrl()
- */
-#define IRQ7		irq_pin(7)
-#define USBCR1		IOMEM(0xe605810a)
-#define USBH		0xC6700000
-#define USBH_USBCTR	0x10834
-
-struct usbhsf_private {
-	struct clk *phy;
-	struct clk *usb24;
-	struct clk *pci;
-	struct clk *func;
-	struct clk *host;
-	void __iomem *usbh_base;
-	struct renesas_usbhs_platform_info info;
-};
-
-#define usbhsf_get_priv(pdev)				\
-	container_of(renesas_usbhs_get_info(pdev),	\
-		     struct usbhsf_private, info)
-
-static int usbhsf_get_id(struct platform_device *pdev)
-{
-	return USBHS_GADGET;
-}
-
-static int usbhsf_power_ctrl(struct platform_device *pdev,
-			      void __iomem *base, int enable)
-{
-	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
-
-	/*
-	 * Work around for USB Function.
-	 * It needs USB host clock, and settings
-	 */
-	if (enable) {
-		/*
-		 * enable all the related usb clocks
-		 * for usb workaround
-		 */
-		clk_enable(priv->usb24);
-		clk_enable(priv->pci);
-		clk_enable(priv->host);
-		clk_enable(priv->func);
-		clk_enable(priv->phy);
-
-		/*
-		 * set USBCR1
-		 *
-		 * Port1 is driven by USB function,
-		 * Port2 is driven by USB HOST
-		 * One HOST (Port1 or Port2 is HOST)
-		 * USB PLL input clock = 24MHz
-		 */
-		__raw_writew(0xd750, USBCR1);
-		mdelay(1);
-
-		/*
-		 * start USB Host
-		 */
-		__raw_writel(0x0000000c, priv->usbh_base + USBH_USBCTR);
-		__raw_writel(0x00000008, priv->usbh_base + USBH_USBCTR);
-		mdelay(10);
-
-		/*
-		 * USB PHY Power ON
-		 */
-		__raw_writew(0xd770, USBCR1);
-		__raw_writew(0x4000, base + 0x102); /* USBF :: SUSPMODE */
-
-	} else {
-		__raw_writel(0x0000010f, priv->usbh_base + USBH_USBCTR);
-		__raw_writew(0xd7c0, USBCR1); /* GPIO */
-
-		clk_disable(priv->phy);
-		clk_disable(priv->func);	/* usb work around */
-		clk_disable(priv->host);	/* usb work around */
-		clk_disable(priv->pci);		/* usb work around */
-		clk_disable(priv->usb24);	/* usb work around */
-	}
-
-	return 0;
-}
-
-static int usbhsf_get_vbus(struct platform_device *pdev)
-{
-	return gpio_get_value(209);
-}
-
-static irqreturn_t usbhsf_interrupt(int irq, void *data)
-{
-	struct platform_device *pdev = data;
-
-	renesas_usbhs_call_notify_hotplug(pdev);
-
-	return IRQ_HANDLED;
-}
-
-static int usbhsf_hardware_exit(struct platform_device *pdev)
-{
-	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
-
-	if (!IS_ERR(priv->phy))
-		clk_put(priv->phy);
-	if (!IS_ERR(priv->usb24))
-		clk_put(priv->usb24);
-	if (!IS_ERR(priv->pci))
-		clk_put(priv->pci);
-	if (!IS_ERR(priv->host))
-		clk_put(priv->host);
-	if (!IS_ERR(priv->func))
-		clk_put(priv->func);
-	if (priv->usbh_base)
-		iounmap(priv->usbh_base);
-
-	priv->phy	= NULL;
-	priv->usb24	= NULL;
-	priv->pci	= NULL;
-	priv->host	= NULL;
-	priv->func	= NULL;
-	priv->usbh_base	= NULL;
-
-	free_irq(IRQ7, pdev);
-
-	return 0;
-}
-
-static int usbhsf_hardware_init(struct platform_device *pdev)
-{
-	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
-	int ret;
-
-	priv->phy	= clk_get(&pdev->dev, "phy");
-	priv->usb24	= clk_get(&pdev->dev, "usb24");
-	priv->pci	= clk_get(&pdev->dev, "pci");
-	priv->func	= clk_get(&pdev->dev, "func");
-	priv->host	= clk_get(&pdev->dev, "host");
-	priv->usbh_base	= ioremap_nocache(USBH, 0x20000);
-
-	if (IS_ERR(priv->phy)		||
-	    IS_ERR(priv->usb24)		||
-	    IS_ERR(priv->pci)		||
-	    IS_ERR(priv->host)		||
-	    IS_ERR(priv->func)		||
-	    !priv->usbh_base) {
-		dev_err(&pdev->dev, "USB clock setting failed\n");
-		usbhsf_hardware_exit(pdev);
-		return -EIO;
-	}
-
-	ret = request_irq(IRQ7, usbhsf_interrupt, IRQF_TRIGGER_NONE,
-			  dev_name(&pdev->dev), pdev);
-	if (ret) {
-		dev_err(&pdev->dev, "request_irq err\n");
-		return ret;
-	}
-	irq_set_irq_type(IRQ7, IRQ_TYPE_EDGE_BOTH);
-
-	/* usb24 use 1/1 of parent clock (= usb24s = 24MHz) */
-	clk_set_rate(priv->usb24,
-		     clk_get_rate(clk_get_parent(priv->usb24)));
-
-	return 0;
-}
-
-static struct usbhsf_private usbhsf_private = {
-	.info = {
-		.platform_callback = {
-			.get_id		= usbhsf_get_id,
-			.get_vbus	= usbhsf_get_vbus,
-			.hardware_init	= usbhsf_hardware_init,
-			.hardware_exit	= usbhsf_hardware_exit,
-			.power_ctrl	= usbhsf_power_ctrl,
-		},
-		.driver_param = {
-			.buswait_bwait		= 5,
-			.detection_delay	= 5,
-			.d0_rx_id	= SHDMA_SLAVE_USBHS_RX,
-			.d1_tx_id	= SHDMA_SLAVE_USBHS_TX,
-		},
-	}
-};
-
-static struct resource usbhsf_resources[] = {
-	{
-		.name	= "USBHS",
-		.start	= 0xe6890000,
-		.end	= 0xe6890104 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= gic_spi(51),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usbhsf_device = {
-	.name	= "renesas_usbhs",
-	.dev = {
-		.platform_data = &usbhsf_private.info,
-	},
-	.id = -1,
-	.num_resources	= ARRAY_SIZE(usbhsf_resources),
-	.resource	= usbhsf_resources,
-};
-
-/* Ether */
-static struct sh_eth_plat_data sh_eth_platdata = {
-	.phy			= 0x00, /* LAN8710A */
-	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
-	.phy_interface		= PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource sh_eth_resources[] = {
-	{
-		.start	= 0xe9a00000,
-		.end	= 0xe9a00800 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= 0xe9a01800,
-		.end	= 0xe9a02000 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= gic_spi(110),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sh_eth_device = {
-	.name = "r8a7740-gether",
-	.id = -1,
-	.dev = {
-		.platform_data = &sh_eth_platdata,
-		.dma_mask = &sh_eth_device.dev.coherent_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource = sh_eth_resources,
-	.num_resources = ARRAY_SIZE(sh_eth_resources),
-};
-
-/* PWM */
-static struct resource pwm_resources[] = {
-	[0] = {
-		.start = 0xe6600000,
-		.end = 0xe66000ff,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device pwm_device = {
-	.name = "renesas-tpu-pwm",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(pwm_resources),
-	.resource = pwm_resources,
-};
-
-static struct pwm_lookup pwm_lookup[] = {
-	PWM_LOOKUP("renesas-tpu-pwm", 2, "pwm-backlight.0", NULL,
-		   33333, PWM_POLARITY_INVERSED),
-};
-
-/* LCDC and backlight */
-static struct platform_pwm_backlight_data pwm_backlight_data = {
-	.lth_brightness = 50,
-	.max_brightness = 255,
-	.dft_brightness = 255,
-	.pwm_period_ns = 33333, /* 30kHz */
-	.enable_gpio = 61,
-};
-
-static struct platform_device pwm_backlight_device = {
-	.name = "pwm-backlight",
-	.dev = {
-		.platform_data = &pwm_backlight_data,
-	},
-};
-
-static struct fb_videomode lcdc0_mode = {
-	.name		= "AMPIER/AM-800480",
-	.xres		= 800,
-	.yres		= 480,
-	.left_margin	= 88,
-	.right_margin	= 40,
-	.hsync_len	= 128,
-	.upper_margin	= 20,
-	.lower_margin	= 5,
-	.vsync_len	= 5,
-	.sync		= 0,
-};
-
-static struct sh_mobile_lcdc_info lcdc0_info = {
-	.clock_source	= LCDC_CLK_BUS,
-	.ch[0] = {
-		.chan		= LCDC_CHAN_MAINLCD,
-		.fourcc		= V4L2_PIX_FMT_RGB565,
-		.interface_type	= RGB24,
-		.clock_divider	= 5,
-		.flags		= 0,
-		.lcd_modes	= &lcdc0_mode,
-		.num_modes	= 1,
-		.panel_cfg = {
-			.width	= 111,
-			.height = 68,
-		},
-	},
-};
-
-static struct resource lcdc0_resources[] = {
-	[0] = {
-		.name	= "LCD0",
-		.start	= 0xfe940000,
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(177),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc0_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc0_resources),
-	.resource	= lcdc0_resources,
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &lcdc0_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-/*
- * LCDC1/HDMI
- */
-static struct sh_mobile_hdmi_info hdmi_info = {
-	.flags		= HDMI_OUTPUT_PUSH_PULL |
-			  HDMI_OUTPUT_POLARITY_HI |
-			  HDMI_32BIT_REG |
-			  HDMI_HAS_HTOP1 |
-			  HDMI_SND_SRC_SPDIF,
-};
-
-static struct resource hdmi_resources[] = {
-	[0] = {
-		.name	= "HDMI",
-		.start	= 0xe6be0000,
-		.end	= 0xe6be03ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(131),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= "HDMI emma3pf",
-		.start	= 0xe6be4000,
-		.end	= 0xe6be43ff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device hdmi_device = {
-	.name		= "sh-mobile-hdmi",
-	.num_resources	= ARRAY_SIZE(hdmi_resources),
-	.resource	= hdmi_resources,
-	.id             = -1,
-	.dev	= {
-		.platform_data	= &hdmi_info,
-	},
-};
-
-static const struct fb_videomode lcdc1_mode = {
-	.name		= "HDMI 720p",
-	.xres		= 1280,
-	.yres		= 720,
-	.pixclock	= 13468,
-	.left_margin	= 220,
-	.right_margin	= 110,
-	.hsync_len	= 40,
-	.upper_margin	= 20,
-	.lower_margin	= 5,
-	.vsync_len	= 5,
-	.refresh	= 60,
-	.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
-};
-
-static struct sh_mobile_lcdc_info hdmi_lcdc_info = {
-	.clock_source	= LCDC_CLK_PERIPHERAL, /* HDMI clock */
-	.ch[0] = {
-		.chan			= LCDC_CHAN_MAINLCD,
-		.fourcc			= V4L2_PIX_FMT_RGB565,
-		.interface_type		= RGB24,
-		.clock_divider		= 1,
-		.flags			= LCDC_FLAGS_DWPOL,
-		.lcd_modes		= &lcdc1_mode,
-		.num_modes		= 1,
-		.tx_dev			= &hdmi_device,
-		.panel_cfg = {
-			.width	= 1280,
-			.height = 720,
-		},
-	},
-};
-
-static struct resource hdmi_lcdc_resources[] = {
-	[0] = {
-		.name	= "LCDC1",
-		.start	= 0xfe944000,
-		.end	= 0xfe948000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(178),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device hdmi_lcdc_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(hdmi_lcdc_resources),
-	.resource	= hdmi_lcdc_resources,
-	.id		= 1,
-	.dev	= {
-		.platform_data	= &hdmi_lcdc_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-/* LEDS */
-static struct gpio_led gpio_leds[] = {
-	{
-		.name		= "LED3",
-		.gpio		= 102,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	}, {
-		.name		= "LED4",
-		.gpio		= 111,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	}, {
-		.name		= "LED5",
-		.gpio		= 110,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	}, {
-		.name		= "LED6",
-		.gpio		= 177,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-};
-
-static struct gpio_led_platform_data leds_gpio_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio_device = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &leds_gpio_info,
-	},
-};
-
-/* GPIO KEY */
-#define GPIO_KEY(c, g, d, ...) \
-	{ .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ }
-
-static struct gpio_keys_button gpio_buttons[] = {
-	GPIO_KEY(KEY_POWER,	99,	"SW3", .wakeup = 1),
-	GPIO_KEY(KEY_BACK,	100,	"SW4"),
-	GPIO_KEY(KEY_MENU,	97,	"SW5"),
-	GPIO_KEY(KEY_HOME,	98,	"SW6"),
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
-	.buttons	= gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
-	.name   = "gpio-keys",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &gpio_key_info,
-	},
-};
-
-/* Fixed 3.3V regulator to be used by SDHI1, MMCIF */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "sh_mmcif"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mmcif"),
-};
-
-/* Fixed 3.3V regulator used by LCD backlight */
-static struct regulator_consumer_supply fixed5v0_power_consumers[] = {
-	REGULATOR_SUPPLY("power", "pwm-backlight.0"),
-};
-
-/* Fixed 3.3V regulator to be used by SDHI0 */
-static struct regulator_consumer_supply vcc_sdhi0_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct regulator_init_data vcc_sdhi0_init_data = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(vcc_sdhi0_consumers),
-	.consumer_supplies      = vcc_sdhi0_consumers,
-};
-
-static struct fixed_voltage_config vcc_sdhi0_info = {
-	.supply_name = "SDHI0 Vcc",
-	.microvolts = 3300000,
-	.gpio = 75,
-	.enable_high = 1,
-	.init_data = &vcc_sdhi0_init_data,
-};
-
-static struct platform_device vcc_sdhi0 = {
-	.name = "reg-fixed-voltage",
-	.id   = 1,
-	.dev  = {
-		.platform_data = &vcc_sdhi0_info,
-	},
-};
-
-/* 1.8 / 3.3V SDHI0 VccQ regulator */
-static struct regulator_consumer_supply vccq_sdhi0_consumers[] = {
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct regulator_init_data vccq_sdhi0_init_data = {
-	.constraints = {
-		.input_uV	= 3300000,
-		.min_uV		= 1800000,
-		.max_uV         = 3300000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(vccq_sdhi0_consumers),
-	.consumer_supplies      = vccq_sdhi0_consumers,
-};
-
-static struct gpio vccq_sdhi0_gpios[] = {
-	{17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" },
-};
-
-static struct gpio_regulator_state vccq_sdhi0_states[] = {
-	{ .value = 3300000, .gpios = (0 << 0) },
-	{ .value = 1800000, .gpios = (1 << 0) },
-};
-
-static struct gpio_regulator_config vccq_sdhi0_info = {
-	.supply_name = "vqmmc",
-
-	.enable_gpio = 74,
-	.enable_high = 1,
-	.enabled_at_boot = 0,
-
-	.gpios = vccq_sdhi0_gpios,
-	.nr_gpios = ARRAY_SIZE(vccq_sdhi0_gpios),
-
-	.states = vccq_sdhi0_states,
-	.nr_states = ARRAY_SIZE(vccq_sdhi0_states),
-
-	.type = REGULATOR_VOLTAGE,
-	.init_data = &vccq_sdhi0_init_data,
-};
-
-static struct platform_device vccq_sdhi0 = {
-	.name = "gpio-regulator",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &vccq_sdhi0_info,
-	},
-};
-
-/* Fixed 3.3V regulator to be used by SDHI1 */
-static struct regulator_consumer_supply vcc_sdhi1_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
-};
-
-static struct regulator_init_data vcc_sdhi1_init_data = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(vcc_sdhi1_consumers),
-	.consumer_supplies      = vcc_sdhi1_consumers,
-};
-
-static struct fixed_voltage_config vcc_sdhi1_info = {
-	.supply_name = "SDHI1 Vcc",
-	.microvolts = 3300000,
-	.gpio = 16,
-	.enable_high = 1,
-	.init_data = &vcc_sdhi1_init_data,
-};
-
-static struct platform_device vcc_sdhi1 = {
-	.name = "reg-fixed-voltage",
-	.id   = 2,
-	.dev  = {
-		.platform_data = &vcc_sdhi1_info,
-	},
-};
-
-/* SDHI0 */
-static struct tmio_mmc_data sdhi0_info = {
-	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI0_TX,
-	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI0_RX,
-	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
-			  MMC_CAP_POWER_OFF_CARD,
-	.flags		= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
-	.cd_gpio	= 167,
-};
-
-static struct resource sdhi0_resources[] = {
-	{
-		.name	= "SDHI0",
-		.start	= 0xe6850000,
-		.end	= 0xe6850100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 * no SH_MOBILE_SDHI_IRQ_CARD_DETECT here
-	 */
-	{
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= gic_spi(118),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= gic_spi(119),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name		= "sh_mobile_sdhi",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &sdhi0_info,
-	},
-	.num_resources	= ARRAY_SIZE(sdhi0_resources),
-	.resource	= sdhi0_resources,
-};
-
-/* SDHI1 */
-static struct tmio_mmc_data sdhi1_info = {
-	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI1_TX,
-	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI1_RX,
-	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
-			  MMC_CAP_POWER_OFF_CARD,
-	.flags		= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
-	/* Port72 cannot generate IRQs, will be used in polling mode. */
-	.cd_gpio	= 72,
-};
-
-static struct resource sdhi1_resources[] = {
-	[0] = {
-		.name	= "SDHI1",
-		.start	= 0xe6860000,
-		.end	= 0xe6860100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(121),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= gic_spi(122),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= gic_spi(123),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi1_device = {
-	.name		= "sh_mobile_sdhi",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &sdhi1_info,
-	},
-	.num_resources	= ARRAY_SIZE(sdhi1_resources),
-	.resource	= sdhi1_resources,
-};
-
-static const struct pinctrl_map eva_sdhi1_pinctrl_map[] = {
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740",
-				  "sdhi1_data4", "sdhi1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740",
-				  "sdhi1_ctrl", "sdhi1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740",
-				  "sdhi1_cd", "sdhi1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740",
-				  "sdhi1_wp", "sdhi1"),
-};
-
-/* MMCIF */
-static struct sh_mmcif_plat_data sh_mmcif_plat = {
-	.sup_pclk	= 0,
-	.caps		= MMC_CAP_4_BIT_DATA |
-			  MMC_CAP_8_BIT_DATA |
-			  MMC_CAP_NONREMOVABLE,
-	.ccs_unsupported = true,
-	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
-	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct resource sh_mmcif_resources[] = {
-	[0] = {
-		.name	= "MMCIF",
-		.start	= 0xe6bd0000,
-		.end	= 0xe6bd0100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/* MMC ERR */
-		.start	= gic_spi(56),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* MMC NOR */
-		.start	= gic_spi(57),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sh_mmcif_device = {
-	.name		= "sh_mmcif",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &sh_mmcif_plat,
-	},
-	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
-	.resource	= sh_mmcif_resources,
-};
-
-/* Camera */
-static int mt9t111_power(struct device *dev, int mode)
-{
-	struct clk *mclk = clk_get(NULL, "video1");
-
-	if (IS_ERR(mclk)) {
-		dev_err(dev, "can't get video1 clock\n");
-		return -EINVAL;
-	}
-
-	if (mode) {
-		/* video1 (= CON1 camera) expect 24MHz */
-		clk_set_rate(mclk, clk_round_rate(mclk, 24000000));
-		clk_enable(mclk);
-		gpio_set_value(158, 1);
-	} else {
-		gpio_set_value(158, 0);
-		clk_disable(mclk);
-	}
-
-	clk_put(mclk);
-
-	return 0;
-}
-
-static struct i2c_board_info i2c_camera_mt9t111 = {
-	I2C_BOARD_INFO("mt9t112", 0x3d),
-};
-
-static struct mt9t112_camera_info mt9t111_info = {
-	.divider = { 16, 0, 0, 7, 0, 10, 14, 7, 7 },
-};
-
-static struct soc_camera_link mt9t111_link = {
-	.i2c_adapter_id	= 0,
-	.bus_id		= 0,
-	.board_info	= &i2c_camera_mt9t111,
-	.power		= mt9t111_power,
-	.priv		= &mt9t111_info,
-};
-
-static struct platform_device camera_device = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &mt9t111_link,
-	},
-};
-
-/* CEU0 */
-static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
-	.flags = SH_CEU_FLAG_LOWER_8BIT,
-};
-
-static struct resource ceu0_resources[] = {
-	[0] = {
-		.name	= "CEU",
-		.start	= 0xfe910000,
-		.end	= 0xfe91009f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(160),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* place holder for contiguous memory */
-	},
-};
-
-static struct platform_device ceu0_device = {
-	.name		= "sh_mobile_ceu",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(ceu0_resources),
-	.resource	= ceu0_resources,
-	.dev	= {
-		.platform_data		= &sh_mobile_ceu0_info,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-/* FSI */
-static struct sh_fsi_platform_info fsi_info = {
-	/* FSI-WM8978 */
-	.port_a = {
-		.tx_id = SHDMA_SLAVE_FSIA_TX,
-	},
-	/* FSI-HDMI */
-	.port_b = {
-		.flags		= SH_FSI_FMT_SPDIF |
-				  SH_FSI_ENABLE_STREAM_MODE |
-				  SH_FSI_CLK_CPG,
-		.tx_id		= SHDMA_SLAVE_FSIB_TX,
-	}
-};
-
-static struct resource fsi_resources[] = {
-	[0] = {
-		.name	= "FSI",
-		.start	= 0xfe1f0000,
-		.end	= 0xfe1f0400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(9),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device fsi_device = {
-	.name		= "sh_fsi2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(fsi_resources),
-	.resource	= fsi_resources,
-	.dev	= {
-		.platform_data	= &fsi_info,
-	},
-};
-
-/* FSI-WM8978 */
-static struct asoc_simple_card_info fsi_wm8978_info = {
-	.name		= "wm8978",
-	.card		= "FSI2A-WM8978",
-	.codec		= "wm8978.0-001a",
-	.platform	= "sh_fsi2",
-	.daifmt		= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM,
-	.cpu_dai = {
-		.name	= "fsia-dai",
-	},
-	.codec_dai = {
-		.name	= "wm8978-hifi",
-		.sysclk	= 12288000,
-	},
-};
-
-static struct platform_device fsi_wm8978_device = {
-	.name	= "asoc-simple-card",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &fsi_wm8978_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &fsi_wm8978_device.dev.coherent_dma_mask,
-	},
-};
-
-/* FSI-HDMI */
-static struct asoc_simple_card_info fsi2_hdmi_info = {
-	.name		= "HDMI",
-	.card		= "FSI2B-HDMI",
-	.codec		= "sh-mobile-hdmi",
-	.platform	= "sh_fsi2",
-	.daifmt		= SND_SOC_DAIFMT_CBS_CFS,
-	.cpu_dai = {
-		.name	= "fsib-dai",
-	},
-	.codec_dai = {
-		.name = "sh_mobile_hdmi-hifi",
-	},
-};
-
-static struct platform_device fsi_hdmi_device = {
-	.name	= "asoc-simple-card",
-	.id	= 1,
-	.dev	= {
-		.platform_data	= &fsi2_hdmi_info,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &fsi_hdmi_device.dev.coherent_dma_mask,
-	},
-};
-
-/* RTC: RTC connects i2c-gpio. */
-static struct i2c_gpio_platform_data i2c_gpio_data = {
-	.sda_pin	= 208,
-	.scl_pin	= 91,
-	.udelay		= 5, /* 100 kHz */
-};
-
-static struct platform_device i2c_gpio_device = {
-	.name = "i2c-gpio",
-	.id = 2,
-	.dev = {
-		.platform_data = &i2c_gpio_data,
-	},
-};
-
-/* I2C */
-static struct st1232_pdata st1232_i2c0_pdata = {
-	.reset_gpio = 166,
-};
-
-static struct i2c_board_info i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("st1232-ts", 0x55),
-		.irq = irq_pin(10),
-		.platform_data = &st1232_i2c0_pdata,
-	},
-	{
-		I2C_BOARD_INFO("wm8978", 0x1a),
-	},
-};
-
-static struct i2c_board_info i2c2_devices[] = {
-	{
-		I2C_BOARD_INFO("s35390a", 0x30),
-		.type = "s35390a",
-	},
-};
-
-/*
- * board devices
- */
-static struct platform_device *eva_devices[] __initdata = {
-	&lcdc0_device,
-	&pwm_device,
-	&pwm_backlight_device,
-	&leds_gpio_device,
-	&gpio_keys_device,
-	&sh_eth_device,
-	&vcc_sdhi0,
-	&vccq_sdhi0,
-	&sdhi0_device,
-	&sh_mmcif_device,
-	&hdmi_device,
-	&hdmi_lcdc_device,
-	&camera_device,
-	&ceu0_device,
-	&fsi_device,
-	&fsi_wm8978_device,
-	&fsi_hdmi_device,
-	&i2c_gpio_device,
-};
-
-static const struct pinctrl_map eva_pinctrl_map[] = {
-	/* CEU0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
-				  "ceu0_data_0_7", "ceu0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
-				  "ceu0_clk_0", "ceu0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
-				  "ceu0_sync", "ceu0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
-				  "ceu0_field", "ceu0"),
-	/* FSIA */
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
-				  "fsia_sclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
-				  "fsia_mclk_out", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
-				  "fsia_data_in_1", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
-				  "fsia_data_out_0", "fsia"),
-	/* FSIB */
-	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740",
-				  "fsib_mclk_in", "fsib"),
-	/* GETHER */
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
-				  "gether_mii", "gether"),
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
-				  "gether_int", "gether"),
-	/* HDMI */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740",
-				  "hdmi", "hdmi"),
-	/* LCD0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
-				  "lcd0_data24_0", "lcd0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
-				  "lcd0_lclk_1", "lcd0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
-				  "lcd0_sync", "lcd0"),
-	/* MMCIF */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740",
-				  "mmc0_data8_1", "mmc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740",
-				  "mmc0_ctrl_1", "mmc0"),
-	/* SCIFA1 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740",
-				  "scifa1_data", "scifa1"),
-	/* SDHI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740",
-				  "sdhi0_wp", "sdhi0"),
-	/* ST1232 */
-	PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-r8a7740",
-				  "intc_irq10", "intc"),
-	/* TPU0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("renesas-tpu-pwm", "pfc-r8a7740",
-				  "tpu0_to2_1", "tpu0"),
-	/* USBHS */
-	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7740",
-				  "intc_irq7_1", "intc"),
-};
-
-static void __init eva_clock_init(void)
-{
-	struct clk *system	= clk_get(NULL, "system_clk");
-	struct clk *xtal1	= clk_get(NULL, "extal1");
-	struct clk *usb24s	= clk_get(NULL, "usb24s");
-	struct clk *fsibck	= clk_get(NULL, "fsibck");
-
-	if (IS_ERR(system)	||
-	    IS_ERR(xtal1)	||
-	    IS_ERR(usb24s)	||
-	    IS_ERR(fsibck)) {
-		pr_err("armadillo800eva board clock init failed\n");
-		goto clock_error;
-	}
-
-	/* armadillo 800 eva extal1 is 24MHz */
-	clk_set_rate(xtal1, 24000000);
-
-	/* usb24s use extal1 (= system) clock (= 24MHz) */
-	clk_set_parent(usb24s, system);
-
-	/* FSIBCK is 12.288MHz, and it is parent of FSI-B */
-	clk_set_rate(fsibck, 12288000);
-
-clock_error:
-	if (!IS_ERR(system))
-		clk_put(system);
-	if (!IS_ERR(xtal1))
-		clk_put(xtal1);
-	if (!IS_ERR(usb24s))
-		clk_put(usb24s);
-	if (!IS_ERR(fsibck))
-		clk_put(fsibck);
-}
-
-/*
- * board init
- */
-#define GPIO_PORT7CR	IOMEM(0xe6050007)
-#define GPIO_PORT8CR	IOMEM(0xe6050008)
-static void __init eva_init(void)
-{
-	static struct pm_domain_device domain_devices[] __initdata = {
-		{ "A4LC", &lcdc0_device },
-		{ "A4LC", &hdmi_lcdc_device },
-		{ "A4MP", &hdmi_device },
-		{ "A4MP", &fsi_device },
-		{ "A4R",  &ceu0_device },
-		{ "A4S",  &sh_eth_device },
-		{ "A3SP", &pwm_device },
-		{ "A3SP", &sdhi0_device },
-		{ "A3SP", &sh_mmcif_device },
-	};
-	struct platform_device *usb = NULL, *sdhi1 = NULL;
-
-	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
-				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-	regulator_register_always_on(3, "fixed-5.0V", fixed5v0_power_consumers,
-				     ARRAY_SIZE(fixed5v0_power_consumers), 5000000);
-
-	pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map));
-	pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
-
-	r8a7740_pinmux_init();
-	r8a7740_meram_workaround();
-
-	/* GETHER */
-	gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */
-
-	/* USB */
-	gpio_request_one(159, GPIOF_IN, NULL); /* USB_DEVICE_MODE */
-
-	if (gpio_get_value(159)) {
-		/* USB Host */
-	} else {
-		/* USB Func */
-		/*
-		 * The USBHS interrupt handlers needs to read the IRQ pin value
-		 * (HI/LOW) to diffentiate USB connection and disconnection
-		 * events (usbhsf_get_vbus()). We thus need to select both the
-		 * intc_irq7_1 pin group and GPIO 209 here.
-		 */
-		gpio_request_one(209, GPIOF_IN, NULL);
-
-		platform_device_register(&usbhsf_device);
-		usb = &usbhsf_device;
-	}
-
-	/* CON1/CON15 Camera */
-	gpio_request_one(173, GPIOF_OUT_INIT_LOW, NULL);  /* STANDBY */
-	gpio_request_one(172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */
-	/* see mt9t111_power() */
-	gpio_request_one(158, GPIOF_OUT_INIT_LOW, NULL);  /* CAM_PON */
-
-	/* FSI-WM8978 */
-	gpio_request(7, NULL);
-	gpio_request(8, NULL);
-	gpio_direction_none(GPIO_PORT7CR); /* FSIAOBT needs no direction */
-	gpio_direction_none(GPIO_PORT8CR); /* FSIAOLR needs no direction */
-
-	/*
-	 * CAUTION
-	 *
-	 * DBGMD/LCDC0/FSIA MUX
-	 * DBGMD_SELECT_B should be set after setting PFC Function.
-	 */
-	gpio_request_one(176, GPIOF_OUT_INIT_HIGH, NULL);
-
-	/*
-	 * We can switch CON8/CON14 by SW1.5,
-	 * but it needs after DBGMD_SELECT_B
-	 */
-	gpio_request_one(6, GPIOF_IN, NULL);
-	if (gpio_get_value(6)) {
-		/* CON14 enable */
-	} else {
-		/* CON8 (SDHI1) enable */
-		pinctrl_register_mappings(eva_sdhi1_pinctrl_map,
-					  ARRAY_SIZE(eva_sdhi1_pinctrl_map));
-
-		platform_device_register(&vcc_sdhi1);
-		platform_device_register(&sdhi1_device);
-		sdhi1 = &sdhi1_device;
-	}
-
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Shared attribute override enable, 32K*8way */
-	l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff);
-#endif
-
-	i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
-	i2c_register_board_info(2, i2c2_devices, ARRAY_SIZE(i2c2_devices));
-
-	r8a7740_add_standard_devices();
-
-	platform_add_devices(eva_devices,
-			     ARRAY_SIZE(eva_devices));
-
-	rmobile_add_devices_to_domains(domain_devices,
-				       ARRAY_SIZE(domain_devices));
-	if (usb)
-		rmobile_add_device_to_domain("A3SP", usb);
-	if (sdhi1)
-		rmobile_add_device_to_domain("A3SP", sdhi1);
-
-	r8a7740_pm_init();
-}
-
-static void __init eva_earlytimer_init(void)
-{
-	r8a7740_clock_init(MD_CK0 | MD_CK2);
-	shmobile_earlytimer_init();
-
-	/* the rate of extal1 clock must be set before late_time_init */
-	eva_clock_init();
-}
-
-#define RESCNT2 IOMEM(0xe6188020)
-static void eva_restart(enum reboot_mode mode, const char *cmd)
-{
-	/* Do soft power on reset */
-	writel((1 << 31), RESCNT2);
-}
-
-static const char *eva_boards_compat_dt[] __initdata = {
-	"renesas,armadillo800eva",
-	NULL,
-};
-
-DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
-	.map_io		= r8a7740_map_io,
-	.init_early	= r8a7740_add_early_devices,
-	.init_irq	= r8a7740_init_irq_of,
-	.init_machine	= eva_init,
-	.init_late	= shmobile_init_late,
-	.init_time	= eva_earlytimer_init,
-	.dt_compat	= eva_boards_compat_dt,
-	.restart	= eva_restart,
-MACHINE_END
-- 
2.1.4

[PATCH 09/16] ARM: shmobile: Remove legacy armadillo800eva_defconfig

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The legacy board code for Armadillo-800 EVA has been removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 MAINTAINERS                                |   1 -
 arch/arm/configs/armadillo800eva_defconfig | 162 -----------------------------
 2 files changed, 163 deletions(-)
 delete mode 100644 arch/arm/configs/armadillo800eva_defconfig

diff --git a/MAINTAINERS b/MAINTAINERS
index ee6e74ca5f03..01afdd4cc162 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1464,7 +1464,6 @@ F:	arch/arm/boot/dts/emev2*
 F:	arch/arm/boot/dts/r7s*
 F:	arch/arm/boot/dts/r8a*
 F:	arch/arm/boot/dts/sh*
-F:	arch/arm/configs/armadillo800eva_defconfig
 F:	arch/arm/configs/bockw_defconfig
 F:	arch/arm/configs/marzen_defconfig
 F:	arch/arm/configs/shmobile_defconfig
diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig
deleted file mode 100644
index 5666e3700a82..000000000000
--- a/arch/arm/configs/armadillo800eva_defconfig
+++ /dev/null
@@ -1,162 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT\x16
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE_LEGACY=y
-CONFIG_ARCH_R8A7740=y
-CONFIG_MACH_ARMADILLO800EVA=y
-# CONFIG_SH_TIMER_TMU is not set
-CONFIG_ARM_THUMB=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_458693=y
-CONFIG_ARM_ERRATA_460075=y
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_PL310_ERRATA_727915=y
-CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_751472=y
-CONFIG_PL310_ERRATA_753970=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_PL310_ERRATA_769419=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_FORCE_MAX_ZONEORDER\x13
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_KEXEC=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-CONFIG_SH_ETH=y
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ST1232=y
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=9
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_GPIO=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_MT9T112=y
-CONFIG_VIDEO_SH_MOBILE_CEU=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FB_SH_MOBILE_HDMI=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-CONFIG_SND_SOC_SH4_FSI=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_RENESAS_USBHS=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_RENESAS_USBHS_UDC=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_S35390A=y
-CONFIG_DMADEVICES=y
-CONFIG_SH_DMAE=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-CONFIG_PWM=y
-CONFIG_PWM_RENESAS_TPU=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
-CONFIG_XZ_DEC=y
-- 
2.1.4

[PATCH 09/16] ARM: shmobile: Remove legacy armadillo800eva_defconfig

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The legacy board code for Armadillo-800 EVA has been removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 MAINTAINERS                                |   1 -
 arch/arm/configs/armadillo800eva_defconfig | 162 -----------------------------
 2 files changed, 163 deletions(-)
 delete mode 100644 arch/arm/configs/armadillo800eva_defconfig

diff --git a/MAINTAINERS b/MAINTAINERS
index ee6e74ca5f03..01afdd4cc162 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1464,7 +1464,6 @@ F:	arch/arm/boot/dts/emev2*
 F:	arch/arm/boot/dts/r7s*
 F:	arch/arm/boot/dts/r8a*
 F:	arch/arm/boot/dts/sh*
-F:	arch/arm/configs/armadillo800eva_defconfig
 F:	arch/arm/configs/bockw_defconfig
 F:	arch/arm/configs/marzen_defconfig
 F:	arch/arm/configs/shmobile_defconfig
diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig
deleted file mode 100644
index 5666e3700a82..000000000000
--- a/arch/arm/configs/armadillo800eva_defconfig
+++ /dev/null
@@ -1,162 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE_LEGACY=y
-CONFIG_ARCH_R8A7740=y
-CONFIG_MACH_ARMADILLO800EVA=y
-# CONFIG_SH_TIMER_TMU is not set
-CONFIG_ARM_THUMB=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_458693=y
-CONFIG_ARM_ERRATA_460075=y
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_PL310_ERRATA_727915=y
-CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_751472=y
-CONFIG_PL310_ERRATA_753970=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_PL310_ERRATA_769419=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_KEXEC=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-CONFIG_SH_ETH=y
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ST1232=y
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=9
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_GPIO=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_MT9T112=y
-CONFIG_VIDEO_SH_MOBILE_CEU=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FB_SH_MOBILE_HDMI=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-CONFIG_SND_SOC_SH4_FSI=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_RENESAS_USBHS=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_RENESAS_USBHS_UDC=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_S35390A=y
-CONFIG_DMADEVICES=y
-CONFIG_SH_DMAE=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-CONFIG_PWM=y
-CONFIG_PWM_RENESAS_TPU=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
-CONFIG_XZ_DEC=y
-- 
2.1.4

[PATCH 10/16] ARM: shmobile: Drop r8a7740-armadillo800eva.dtb for legacy builds

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The legacy board code for Armadillo-800 EVA has been removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/Makefile | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b1d0a12a94ef..14fc8f1fe2d8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -501,7 +501,6 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
 	s5pv210-smdkv210.dtb \
 	s5pv210-torbreck.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
-	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
 	r8a7778-bockw-reference.dtb \
 	r8a7779-marzen.dtb
-- 
2.1.4

[PATCH 10/16] ARM: shmobile: Drop r8a7740-armadillo800eva.dtb for legacy builds

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The legacy board code for Armadillo-800 EVA has been removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/Makefile | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b1d0a12a94ef..14fc8f1fe2d8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -501,7 +501,6 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
 	s5pv210-smdkv210.dtb \
 	s5pv210-torbreck.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
-	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
 	r8a7778-bockw-reference.dtb \
 	r8a7779-marzen.dtb
-- 
2.1.4

[PATCH 11/16] ARM: shmobile: Remove legacy SoC code for R-Mobile A1

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last user of the R-Mobile A1 (r8a7740) legacy SoC code was the
Armadillo-800 EVA legacy board code, which has been removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[horms: resolved trivial conflicts with v4.2-rc1]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig         |   7 -
 arch/arm/mach-shmobile/Makefile        |   3 +-
 arch/arm/mach-shmobile/clock-r8a7740.c | 675 --------------------------------
 arch/arm/mach-shmobile/pm-r8a7740.c    | 129 -------
 arch/arm/mach-shmobile/r8a7740.h       |  58 ---
 arch/arm/mach-shmobile/setup-r8a7740.c | 678 +--------------------------------
 6 files changed, 4 insertions(+), 1546 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/clock-r8a7740.c
 delete mode 100644 arch/arm/mach-shmobile/pm-r8a7740.c
 delete mode 100644 arch/arm/mach-shmobile/r8a7740.h

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 49d455c0c39e..bfe92bc96a47 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -103,13 +103,6 @@ if ARCH_SHMOBILE_LEGACY
 
 comment "Renesas ARM SoCs System Type"
 
-config ARCH_R8A7740
-	bool "R-Mobile A1 (R8A77400)"
-	select ARCH_RMOBILE
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-	select RENESAS_INTC_IRQPIN
-
 config ARCH_R8A7778
 	bool "R-Car M1A (R8A77781)"
 	select ARCH_RCAR_GEN1
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 548536fcb3b1..726c219e5b13 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -8,7 +8,7 @@ obj-y				:= timer.o console.o
 # CPU objects
 obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o
 obj-$(CONFIG_ARCH_R8A73A4)	+= setup-r8a73a4.o
-obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o pm-r8a7740.o
+obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7778)	+= setup-r8a7778.o
 obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o pm-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o
@@ -20,7 +20,6 @@ obj-$(CONFIG_ARCH_R7S72100)	+= setup-r7s72100.o
 # Clock objects
 ifndef CONFIG_COMMON_CLK
 obj-y				+= clock.o
-obj-$(CONFIG_ARCH_R8A7740)	+= clock-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7778)	+= clock-r8a7778.o
 obj-$(CONFIG_ARCH_R8A7779)	+= clock-r8a7779.o
 endif
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
deleted file mode 100644
index 9cac8247c72b..000000000000
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ /dev/null
@@ -1,675 +0,0 @@
-/*
- * R8A7740 processor support
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-
-#include "clock.h"
-#include "common.h"
-#include "r8a7740.h"
-
-/*
- *        |  MDx  |  XTAL1/EXTAL1   |  System   | EXTALR |
- *  Clock |-------+-----------------+  clock    | 32.768 |   RCLK
- *  Mode  | 2/1/0 | src         MHz |  source   |  KHz   |  source
- * -------+-------+-----------------+-----------+--------+----------
- *    0   | 0 0 0 | External  20~50 | XTAL1     |    O   |  EXTALR
- *    1   | 0 0 1 | Crystal   20~30 | XTAL1     |    O   |  EXTALR
- *    2   | 0 1 0 | External  40~50 | XTAL1 / 2 |    O   |  EXTALR
- *    3   | 0 1 1 | Crystal   40~50 | XTAL1 / 2 |    O   |  EXTALR
- *    4   | 1 0 0 | External  20~50 | XTAL1     |    x   |  XTAL1 / 1024
- *    5   | 1 0 1 | Crystal   20~30 | XTAL1     |    x   |  XTAL1 / 1024
- *    6   | 1 1 0 | External  40~50 | XTAL1 / 2 |    x   |  XTAL1 / 2048
- *    7   | 1 1 1 | Crystal   40~50 | XTAL1 / 2 |    x   |  XTAL1 / 2048
- */
-
-/* CPG registers */
-#define FRQCRA		IOMEM(0xe6150000)
-#define FRQCRB		IOMEM(0xe6150004)
-#define VCLKCR1		IOMEM(0xE6150008)
-#define VCLKCR2		IOMEM(0xE615000c)
-#define FRQCRC		IOMEM(0xe61500e0)
-#define FSIACKCR	IOMEM(0xe6150018)
-#define PLLC01CR	IOMEM(0xe6150028)
-
-#define SUBCKCR		IOMEM(0xe6150080)
-#define USBCKCR		IOMEM(0xe615008c)
-
-#define MSTPSR0		IOMEM(0xe6150030)
-#define MSTPSR1		IOMEM(0xe6150038)
-#define MSTPSR2		IOMEM(0xe6150040)
-#define MSTPSR3		IOMEM(0xe6150048)
-#define MSTPSR4		IOMEM(0xe615004c)
-#define FSIBCKCR	IOMEM(0xe6150090)
-#define HDMICKCR	IOMEM(0xe6150094)
-#define SMSTPCR0	IOMEM(0xe6150130)
-#define SMSTPCR1	IOMEM(0xe6150134)
-#define SMSTPCR2	IOMEM(0xe6150138)
-#define SMSTPCR3	IOMEM(0xe615013c)
-#define SMSTPCR4	IOMEM(0xe6150140)
-
-#define FSIDIVA		IOMEM(0xFE1F8000)
-#define FSIDIVB		IOMEM(0xFE1F8008)
-
-/* Fixed 32 KHz root clock from EXTALR pin */
-static struct clk extalr_clk = {
-	.rate	= 32768,
-};
-
-/*
- * 25MHz default rate for the EXTAL1 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-static struct clk extal1_clk = {
-	.rate	= 25000000,
-};
-
-/*
- * 48MHz default rate for the EXTAL2 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-static struct clk extal2_clk = {
-	.rate	= 48000000,
-};
-
-/*
- * 27MHz default rate for the DV_CLKI root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-static struct clk dv_clk = {
-	.rate	= 27000000,
-};
-
-SH_CLK_RATIO(div2,	1, 2);
-SH_CLK_RATIO(div1k,	1, 1024);
-
-SH_FIXED_RATIO_CLK(extal1_div2_clk,	extal1_clk,		div2);
-SH_FIXED_RATIO_CLK(extal1_div1024_clk,	extal1_clk,		div1k);
-SH_FIXED_RATIO_CLK(extal1_div2048_clk,	extal1_div2_clk,	div1k);
-SH_FIXED_RATIO_CLK(extal2_div2_clk,	extal2_clk,		div2);
-
-static struct sh_clk_ops followparent_clk_ops = {
-	.recalc	= followparent_recalc,
-};
-
-/* Main clock */
-static struct clk system_clk = {
-	.ops	= &followparent_clk_ops,
-};
-
-SH_FIXED_RATIO_CLK(system_div2_clk, system_clk,	div2);
-
-/* r_clk */
-static struct clk r_clk = {
-	.ops	= &followparent_clk_ops,
-};
-
-/* PLLC0/PLLC1 */
-static unsigned long pllc01_recalc(struct clk *clk)
-{
-	unsigned long mult = 1;
-
-	if (__raw_readl(PLLC01CR) & (1 << 14))
-		mult = ((__raw_readl(clk->enable_reg) >> 24) & 0x7f) + 1;
-
-	return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops pllc01_clk_ops = {
-	.recalc		= pllc01_recalc,
-};
-
-static struct clk pllc0_clk = {
-	.ops		= &pllc01_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &system_clk,
-	.enable_reg	= (void __iomem *)FRQCRC,
-};
-
-static struct clk pllc1_clk = {
-	.ops		= &pllc01_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &system_div2_clk,
-	.enable_reg	= (void __iomem *)FRQCRA,
-};
-
-/* PLLC1 / 2 */
-SH_FIXED_RATIO_CLK(pllc1_div2_clk, pllc1_clk, div2);
-
-/* USB clock */
-/*
- * USBCKCR is controlling usb24 clock
- * bit[7] : parent clock
- * bit[6] : clock divide rate
- * And this bit[7] is used as a "usb24s" from other devices.
- * (Video clock / Sub clock / SPU clock)
- * You can controll this clock as a below.
- *
- * struct clk *usb24	= clk_get(dev,  "usb24");
- * struct clk *usb24s	= clk_get(NULL, "usb24s");
- * struct clk *system	= clk_get(NULL, "system_clk");
- * int rate = clk_get_rate(system);
- *
- * clk_set_parent(usb24s, system);  // for bit[7]
- * clk_set_rate(usb24, rate / 2);   // for bit[6]
- */
-static struct clk *usb24s_parents[] = {
-	[0] = &system_clk,
-	[1] = &extal2_clk
-};
-
-static int usb24s_enable(struct clk *clk)
-{
-	__raw_writel(__raw_readl(USBCKCR) & ~(1 << 8), USBCKCR);
-
-	return 0;
-}
-
-static void usb24s_disable(struct clk *clk)
-{
-	__raw_writel(__raw_readl(USBCKCR) | (1 << 8), USBCKCR);
-}
-
-static int usb24s_set_parent(struct clk *clk, struct clk *parent)
-{
-	int i, ret;
-	u32 val;
-
-	if (!clk->parent_table || !clk->parent_num)
-		return -EINVAL;
-
-	/* Search the parent */
-	for (i = 0; i < clk->parent_num; i++)
-		if (clk->parent_table[i] = parent)
-			break;
-
-	if (i = clk->parent_num)
-		return -ENODEV;
-
-	ret = clk_reparent(clk, parent);
-	if (ret < 0)
-		return ret;
-
-	val = __raw_readl(USBCKCR);
-	val &= ~(1 << 7);
-	val |= i << 7;
-	__raw_writel(val, USBCKCR);
-
-	return 0;
-}
-
-static struct sh_clk_ops usb24s_clk_ops = {
-	.recalc		= followparent_recalc,
-	.enable		= usb24s_enable,
-	.disable	= usb24s_disable,
-	.set_parent	= usb24s_set_parent,
-};
-
-static struct clk usb24s_clk = {
-	.ops		= &usb24s_clk_ops,
-	.parent_table	= usb24s_parents,
-	.parent_num	= ARRAY_SIZE(usb24s_parents),
-	.parent		= &system_clk,
-};
-
-static unsigned long usb24_recalc(struct clk *clk)
-{
-	return clk->parent->rate /
-		((__raw_readl(USBCKCR) & (1 << 6)) ? 1 : 2);
-};
-
-static int usb24_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 val;
-
-	/* closer to which ? parent->rate or parent->rate/2 */
-	val = __raw_readl(USBCKCR);
-	val &= ~(1 << 6);
-	val |= (rate > (clk->parent->rate / 4) * 3) << 6;
-	__raw_writel(val, USBCKCR);
-
-	return 0;
-}
-
-static struct sh_clk_ops usb24_clk_ops = {
-	.recalc		= usb24_recalc,
-	.set_rate	= usb24_set_rate,
-};
-
-static struct clk usb24_clk = {
-	.ops		= &usb24_clk_ops,
-	.parent		= &usb24s_clk,
-};
-
-/* External FSIACK/FSIBCK clock */
-static struct clk fsiack_clk = {
-};
-
-static struct clk fsibck_clk = {
-};
-
-static struct clk *main_clks[] = {
-	&extalr_clk,
-	&extal1_clk,
-	&extal2_clk,
-	&extal1_div2_clk,
-	&extal1_div1024_clk,
-	&extal1_div2048_clk,
-	&extal2_div2_clk,
-	&dv_clk,
-	&system_clk,
-	&system_div2_clk,
-	&r_clk,
-	&pllc0_clk,
-	&pllc1_clk,
-	&pllc1_div2_clk,
-	&usb24s_clk,
-	&usb24_clk,
-	&fsiack_clk,
-	&fsibck_clk,
-};
-
-/* DIV4 clocks */
-static void div4_kick(struct clk *clk)
-{
-	unsigned long value;
-
-	/* set KICK bit in FRQCRB to update hardware setting */
-	value = __raw_readl(FRQCRB);
-	value |= (1 << 31);
-	__raw_writel(value, FRQCRB);
-}
-
-static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
-			  24, 32, 36, 48, 0, 72, 96, 0 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
-	.divisors = divisors,
-	.nr_divisors = ARRAY_SIZE(divisors),
-};
-
-static struct clk_div4_table div4_table = {
-	.div_mult_table = &div4_div_mult_table,
-	.kick = div4_kick,
-};
-
-enum {
-	DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP,
-	DIV4_HPP, DIV4_USBP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP,
-	DIV4_NR
-};
-
-static struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_ZG]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_B]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA,  8, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_M1]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA,  4, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_HP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRB,  4, 0x6fff, 0),
-	[DIV4_HPP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 20, 0x6fff, 0),
-	[DIV4_USBP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 16, 0x6fff, 0),
-	[DIV4_S]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 12, 0x6fff, 0),
-	[DIV4_ZB]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  8, 0x6fff, 0),
-	[DIV4_M3]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  4, 0x6fff, 0),
-	[DIV4_CP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  0, 0x6fff, 0),
-};
-
-/* DIV6 reparent */
-enum {
-	DIV6_HDMI,
-	DIV6_VCLK1, DIV6_VCLK2,
-	DIV6_FSIA, DIV6_FSIB,
-	DIV6_REPARENT_NR,
-};
-
-static struct clk *hdmi_parent[] = {
-	[0] = &pllc1_div2_clk,
-	[1] = &system_clk,
-	[2] = &dv_clk
-};
-
-static struct clk *vclk_parents[8] = {
-	[0] = &pllc1_div2_clk,
-	[2] = &dv_clk,
-	[3] = &usb24s_clk,
-	[4] = &extal1_div2_clk,
-	[5] = &extalr_clk,
-};
-
-static struct clk *fsia_parents[] = {
-	[0] = &pllc1_div2_clk,
-	[1] = &fsiack_clk, /* external clock */
-};
-
-static struct clk *fsib_parents[] = {
-	[0] = &pllc1_div2_clk,
-	[1] = &fsibck_clk, /* external clock */
-};
-
-static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
-	[DIV6_HDMI] = SH_CLK_DIV6_EXT(HDMICKCR, 0,
-				      hdmi_parent, ARRAY_SIZE(hdmi_parent), 6, 2),
-	[DIV6_VCLK1] = SH_CLK_DIV6_EXT(VCLKCR1, 0,
-				       vclk_parents, ARRAY_SIZE(vclk_parents), 12, 3),
-	[DIV6_VCLK2] = SH_CLK_DIV6_EXT(VCLKCR2, 0,
-				       vclk_parents, ARRAY_SIZE(vclk_parents), 12, 3),
-	[DIV6_FSIA] = SH_CLK_DIV6_EXT(FSIACKCR, 0,
-				      fsia_parents, ARRAY_SIZE(fsia_parents), 6, 2),
-	[DIV6_FSIB] = SH_CLK_DIV6_EXT(FSIBCKCR, 0,
-				      fsib_parents, ARRAY_SIZE(fsib_parents), 6, 2),
-};
-
-/* DIV6 clocks */
-enum {
-	DIV6_SUB,
-	DIV6_NR
-};
-
-static struct clk div6_clks[DIV6_NR] = {
-	[DIV6_SUB]	= SH_CLK_DIV6(&pllc1_div2_clk, SUBCKCR, 0),
-};
-
-/* HDMI1/2 clock */
-static unsigned long hdmi12_recalc(struct clk *clk)
-{
-	u32 val = __raw_readl(HDMICKCR);
-	int shift = (int)clk->priv;
-
-	val >>= shift;
-	val &= 0x3;
-
-	return clk->parent->rate / (1 << val);
-};
-
-static int hdmi12_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 val, mask;
-	int i, shift;
-
-	for (i = 0; i < 3; i++)
-		if (rate = clk->parent->rate / (1 << i))
-			goto find;
-	return -ENODEV;
-
-find:
-	shift = (int)clk->priv;
-
-	val = __raw_readl(HDMICKCR);
-	mask = ~(0x3 << shift);
-	val = (val & mask) | i << shift;
-	__raw_writel(val, HDMICKCR);
-
-	return 0;
-};
-
-static struct sh_clk_ops hdmi12_clk_ops = {
-	.recalc		= hdmi12_recalc,
-	.set_rate	= hdmi12_set_rate,
-};
-
-static struct clk hdmi1_clk = {
-	.ops		= &hdmi12_clk_ops,
-	.priv		= (void *)9,
-	.parent		= &div6_reparent_clks[DIV6_HDMI],  /* late install */
-};
-
-static struct clk hdmi2_clk = {
-	.ops		= &hdmi12_clk_ops,
-	.priv		= (void *)11,
-	.parent		= &div6_reparent_clks[DIV6_HDMI], /* late install */
-};
-
-static struct clk *late_main_clks[] = {
-	&hdmi1_clk,
-	&hdmi2_clk,
-};
-
-/* FSI DIV */
-enum { FSIDIV_A, FSIDIV_B, FSIDIV_REPARENT_NR };
-
-static struct clk fsidivs[] = {
-	[FSIDIV_A] = SH_CLK_FSIDIV(FSIDIVA, &div6_reparent_clks[DIV6_FSIA]),
-	[FSIDIV_B] = SH_CLK_FSIDIV(FSIDIVB, &div6_reparent_clks[DIV6_FSIB]),
-};
-
-/* MSTP */
-enum {
-	MSTP128, MSTP127, MSTP125,
-	MSTP116, MSTP111, MSTP100, MSTP117,
-
-	MSTP230, MSTP229,
-	MSTP222,
-	MSTP218, MSTP217, MSTP216, MSTP214,
-	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
-
-	MSTP329, MSTP328, MSTP323, MSTP320,
-	MSTP314, MSTP313, MSTP312,
-	MSTP309, MSTP304,
-
-	MSTP416, MSTP415, MSTP407, MSTP406,
-
-	MSTP_NR
-};
-
-static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP128] = SH_CLK_MSTP32(&div4_clks[DIV4_S],	SMSTPCR1, 28, 0), /* CEU21 */
-	[MSTP127] = SH_CLK_MSTP32(&div4_clks[DIV4_S],	SMSTPCR1, 27, 0), /* CEU20 */
-	[MSTP125] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR1, 25, 0), /* TMU0 */
-	[MSTP117] = SH_CLK_MSTP32(&div4_clks[DIV4_B],	SMSTPCR1, 17, 0), /* LCDC1 */
-	[MSTP116] = SH_CLK_MSTP32(&div4_clks[DIV4_HPP],	SMSTPCR1, 16, 0), /* IIC0 */
-	[MSTP111] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR1, 11, 0), /* TMU1 */
-	[MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_B],	SMSTPCR1,  0, 0), /* LCDC0 */
-
-	[MSTP230] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2, 30, 0), /* SCIFA6 */
-	[MSTP229] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR2, 29, 0), /* INTCA */
-	[MSTP222] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2, 22, 0), /* SCIFA7 */
-	[MSTP218] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],  SMSTPCR2, 18, 0), /* DMAC1 */
-	[MSTP217] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],  SMSTPCR2, 17, 0), /* DMAC2 */
-	[MSTP216] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],  SMSTPCR2, 16, 0), /* DMAC3 */
-	[MSTP214] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],  SMSTPCR2, 14, 0), /* USBDMAC */
-	[MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  7, 0), /* SCIFA5 */
-	[MSTP206] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  6, 0), /* SCIFB */
-	[MSTP204] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  4, 0), /* SCIFA0 */
-	[MSTP203] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  3, 0), /* SCIFA1 */
-	[MSTP202] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  2, 0), /* SCIFA2 */
-	[MSTP201] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  1, 0), /* SCIFA3 */
-	[MSTP200] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  0, 0), /* SCIFA4 */
-
-	[MSTP329] = SH_CLK_MSTP32(&r_clk,		SMSTPCR3, 29, 0), /* CMT10 */
-	[MSTP328] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 28, 0), /* FSI */
-	[MSTP323] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR3, 23, 0), /* IIC1 */
-	[MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 20, 0), /* USBF */
-	[MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 14, 0), /* SDHI0 */
-	[MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 13, 0), /* SDHI1 */
-	[MSTP312] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 12, 0), /* MMC */
-	[MSTP309] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3,  9, 0), /* GEther */
-	[MSTP304] = SH_CLK_MSTP32(&div4_clks[DIV4_CP],	SMSTPCR3,  4, 0), /* TPU0 */
-
-	[MSTP416] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 16, 0), /* USBHOST */
-	[MSTP415] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 15, 0), /* SDHI2 */
-	[MSTP407] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4,  7, 0), /* USB-Func */
-	[MSTP406] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4,  6, 0), /* USB Phy */
-};
-
-static struct clk_lookup lookups[] = {
-	/* main clocks */
-	CLKDEV_CON_ID("extalr",			&extalr_clk),
-	CLKDEV_CON_ID("extal1",			&extal1_clk),
-	CLKDEV_CON_ID("extal2",			&extal2_clk),
-	CLKDEV_CON_ID("extal1_div2",		&extal1_div2_clk),
-	CLKDEV_CON_ID("extal1_div1024",		&extal1_div1024_clk),
-	CLKDEV_CON_ID("extal1_div2048",		&extal1_div2048_clk),
-	CLKDEV_CON_ID("extal2_div2",		&extal2_div2_clk),
-	CLKDEV_CON_ID("dv_clk",			&dv_clk),
-	CLKDEV_CON_ID("system_clk",		&system_clk),
-	CLKDEV_CON_ID("system_div2_clk",	&system_div2_clk),
-	CLKDEV_CON_ID("r_clk",			&r_clk),
-	CLKDEV_CON_ID("pllc0_clk",		&pllc0_clk),
-	CLKDEV_CON_ID("pllc1_clk",		&pllc1_clk),
-	CLKDEV_CON_ID("pllc1_div2_clk",		&pllc1_div2_clk),
-	CLKDEV_CON_ID("usb24s",			&usb24s_clk),
-	CLKDEV_CON_ID("hdmi1",			&hdmi1_clk),
-	CLKDEV_CON_ID("hdmi2",			&hdmi2_clk),
-	CLKDEV_CON_ID("video1",			&div6_reparent_clks[DIV6_VCLK1]),
-	CLKDEV_CON_ID("video2",			&div6_reparent_clks[DIV6_VCLK2]),
-	CLKDEV_CON_ID("fsiack",			&fsiack_clk),
-	CLKDEV_CON_ID("fsibck",			&fsibck_clk),
-
-	/* DIV4 clocks */
-	CLKDEV_CON_ID("i_clk",			&div4_clks[DIV4_I]),
-	CLKDEV_CON_ID("zg_clk",			&div4_clks[DIV4_ZG]),
-	CLKDEV_CON_ID("b_clk",			&div4_clks[DIV4_B]),
-	CLKDEV_CON_ID("m1_clk",			&div4_clks[DIV4_M1]),
-	CLKDEV_CON_ID("hp_clk",			&div4_clks[DIV4_HP]),
-	CLKDEV_CON_ID("hpp_clk",		&div4_clks[DIV4_HPP]),
-	CLKDEV_CON_ID("s_clk",			&div4_clks[DIV4_S]),
-	CLKDEV_CON_ID("zb_clk",			&div4_clks[DIV4_ZB]),
-	CLKDEV_CON_ID("m3_clk",			&div4_clks[DIV4_M3]),
-	CLKDEV_CON_ID("cp_clk",			&div4_clks[DIV4_CP]),
-
-	/* DIV6 clocks */
-	CLKDEV_CON_ID("sub_clk",		&div6_clks[DIV6_SUB]),
-
-	/* MSTP32 clocks */
-	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0",	&mstp_clks[MSTP100]),
-	CLKDEV_DEV_ID("i2c-sh_mobile.0",	&mstp_clks[MSTP116]),
-	CLKDEV_DEV_ID("fff20000.i2c",		&mstp_clks[MSTP116]),
-	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1",	&mstp_clks[MSTP117]),
-	CLKDEV_DEV_ID("sh_mobile_ceu.0",	&mstp_clks[MSTP127]),
-	CLKDEV_DEV_ID("sh_mobile_ceu.1",	&mstp_clks[MSTP128]),
-
-	CLKDEV_DEV_ID("sh-sci.4",		&mstp_clks[MSTP200]),
-	CLKDEV_DEV_ID("e6c80000.serial",	&mstp_clks[MSTP200]),
-	CLKDEV_DEV_ID("sh-sci.3",		&mstp_clks[MSTP201]),
-	CLKDEV_DEV_ID("e6c70000.serial",	&mstp_clks[MSTP201]),
-	CLKDEV_DEV_ID("sh-sci.2",		&mstp_clks[MSTP202]),
-	CLKDEV_DEV_ID("e6c60000.serial",	&mstp_clks[MSTP202]),
-	CLKDEV_DEV_ID("sh-sci.1",		&mstp_clks[MSTP203]),
-	CLKDEV_DEV_ID("e6c50000.serial",	&mstp_clks[MSTP203]),
-	CLKDEV_DEV_ID("sh-sci.0",		&mstp_clks[MSTP204]),
-	CLKDEV_DEV_ID("e6c40000.serial",	&mstp_clks[MSTP204]),
-	CLKDEV_DEV_ID("sh-sci.8",		&mstp_clks[MSTP206]),
-	CLKDEV_DEV_ID("e6c30000.serial",	&mstp_clks[MSTP206]),
-	CLKDEV_DEV_ID("sh-sci.5",		&mstp_clks[MSTP207]),
-	CLKDEV_DEV_ID("e6cb0000.serial",	&mstp_clks[MSTP207]),
-	CLKDEV_DEV_ID("sh-dma-engine.3",	&mstp_clks[MSTP214]),
-	CLKDEV_DEV_ID("sh-dma-engine.2",	&mstp_clks[MSTP216]),
-	CLKDEV_DEV_ID("sh-dma-engine.1",	&mstp_clks[MSTP217]),
-	CLKDEV_DEV_ID("sh-dma-engine.0",	&mstp_clks[MSTP218]),
-	CLKDEV_DEV_ID("sh-sci.7",		&mstp_clks[MSTP222]),
-	CLKDEV_DEV_ID("e6cd0000.serial",	&mstp_clks[MSTP222]),
-	CLKDEV_DEV_ID("renesas_intc_irqpin.0",	&mstp_clks[MSTP229]),
-	CLKDEV_DEV_ID("renesas_intc_irqpin.1",	&mstp_clks[MSTP229]),
-	CLKDEV_DEV_ID("renesas_intc_irqpin.2",	&mstp_clks[MSTP229]),
-	CLKDEV_DEV_ID("renesas_intc_irqpin.3",	&mstp_clks[MSTP229]),
-	CLKDEV_DEV_ID("sh-sci.6",		&mstp_clks[MSTP230]),
-	CLKDEV_DEV_ID("e6cc0000.serial",	&mstp_clks[MSTP230]),
-
-	CLKDEV_DEV_ID("sh_fsi2",		&mstp_clks[MSTP328]),
-	CLKDEV_DEV_ID("fe1f0000.sound",		&mstp_clks[MSTP328]),
-	CLKDEV_DEV_ID("i2c-sh_mobile.1",	&mstp_clks[MSTP323]),
-	CLKDEV_DEV_ID("e6c20000.i2c",		&mstp_clks[MSTP323]),
-	CLKDEV_DEV_ID("renesas_usbhs",		&mstp_clks[MSTP320]),
-	CLKDEV_DEV_ID("sh_mobile_sdhi.0",	&mstp_clks[MSTP314]),
-	CLKDEV_DEV_ID("e6850000.sd",		&mstp_clks[MSTP314]),
-	CLKDEV_DEV_ID("sh_mobile_sdhi.1",	&mstp_clks[MSTP313]),
-	CLKDEV_DEV_ID("e6860000.sd",		&mstp_clks[MSTP313]),
-	CLKDEV_DEV_ID("sh_mmcif",		&mstp_clks[MSTP312]),
-	CLKDEV_DEV_ID("e6bd0000.mmc",		&mstp_clks[MSTP312]),
-	CLKDEV_DEV_ID("r8a7740-gether",		&mstp_clks[MSTP309]),
-	CLKDEV_DEV_ID("e9a00000.ethernet",	&mstp_clks[MSTP309]),
-	CLKDEV_DEV_ID("renesas-tpu-pwm",	&mstp_clks[MSTP304]),
-	CLKDEV_DEV_ID("e6600000.pwm",		&mstp_clks[MSTP304]),
-
-	CLKDEV_DEV_ID("sh_mobile_sdhi.2",	&mstp_clks[MSTP415]),
-	CLKDEV_DEV_ID("e6870000.sd",		&mstp_clks[MSTP415]),
-
-	/* ICK */
-	CLKDEV_ICK_ID("fck",	"sh-tmu.1",		&mstp_clks[MSTP111]),
-	CLKDEV_ICK_ID("fck",	"fff90000.timer",	&mstp_clks[MSTP111]),
-	CLKDEV_ICK_ID("fck",	"sh-tmu.0",		&mstp_clks[MSTP125]),
-	CLKDEV_ICK_ID("fck",	"fff80000.timer",	&mstp_clks[MSTP125]),
-	CLKDEV_ICK_ID("fck",	"sh-cmt-48.1",		&mstp_clks[MSTP329]),
-	CLKDEV_ICK_ID("fck",	"e6138000.timer",	&mstp_clks[MSTP329]),
-	CLKDEV_ICK_ID("host",	"renesas_usbhs",	&mstp_clks[MSTP416]),
-	CLKDEV_ICK_ID("func",	"renesas_usbhs",	&mstp_clks[MSTP407]),
-	CLKDEV_ICK_ID("phy",	"renesas_usbhs",	&mstp_clks[MSTP406]),
-	CLKDEV_ICK_ID("pci",	"renesas_usbhs",	&div4_clks[DIV4_USBP]),
-	CLKDEV_ICK_ID("usb24",	"renesas_usbhs",	&usb24_clk),
-	CLKDEV_ICK_ID("ick",	"sh-mobile-hdmi",	&div6_reparent_clks[DIV6_HDMI]),
-
-	CLKDEV_ICK_ID("icka", "sh_fsi2",	&div6_reparent_clks[DIV6_FSIA]),
-	CLKDEV_ICK_ID("ickb", "sh_fsi2",	&div6_reparent_clks[DIV6_FSIB]),
-	CLKDEV_ICK_ID("diva", "sh_fsi2",	&fsidivs[FSIDIV_A]),
-	CLKDEV_ICK_ID("divb", "sh_fsi2",	&fsidivs[FSIDIV_B]),
-	CLKDEV_ICK_ID("xcka", "sh_fsi2",	&fsiack_clk),
-	CLKDEV_ICK_ID("xckb", "sh_fsi2",	&fsibck_clk),
-};
-
-void __init r8a7740_clock_init(u8 md_ck)
-{
-	int k, ret = 0;
-
-	/* detect system clock parent */
-	if (md_ck & MD_CK1)
-		system_clk.parent = &extal1_div2_clk;
-	else
-		system_clk.parent = &extal1_clk;
-
-	/* detect RCLK parent */
-	switch (md_ck & (MD_CK2 | MD_CK1)) {
-	case MD_CK2 | MD_CK1:
-		r_clk.parent = &extal1_div2048_clk;
-		break;
-	case MD_CK2:
-		r_clk.parent = &extal1_div1024_clk;
-		break;
-	case MD_CK1:
-	default:
-		r_clk.parent = &extalr_clk;
-		break;
-	}
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	if (!ret)
-		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
-	if (!ret)
-		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
-	if (!ret)
-		ret = sh_clk_div6_reparent_register(div6_reparent_clks,
-						    DIV6_REPARENT_NR);
-
-	if (!ret)
-		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
-		ret = clk_register(late_main_clks[k]);
-
-	if (!ret)
-		ret = sh_clk_fsidiv_register(fsidivs, FSIDIV_REPARENT_NR);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup r8a7740 clocks\n");
-}
diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c
deleted file mode 100644
index 34608fcf0648..000000000000
--- a/arch/arm/mach-shmobile/pm-r8a7740.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * r8a7740 power management support
- *
- * Copyright (C) 2012  Renesas Solutions Corp.
- * Copyright (C) 2012  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/console.h>
-#include <linux/io.h>
-#include <linux/suspend.h>
-
-#include "common.h"
-#include "pm-rmobile.h"
-
-#define SYSC_BASE	IOMEM(0xe6180000)
-
-#if defined(CONFIG_PM) && !defined(CONFIG_ARCH_MULTIPLATFORM)
-static int r8a7740_pd_a3sm_suspend(void)
-{
-	/*
-	 * The A3SM domain contains the CPU core and therefore it should
-	 * only be turned off if the CPU is not in use.
-	 */
-	return -EBUSY;
-}
-
-static int r8a7740_pd_a3sp_suspend(void)
-{
-	/*
-	 * Serial consoles make use of SCIF hardware located in A3SP,
-	 * keep such power domain on if "no_console_suspend" is set.
-	 */
-	return console_suspend_enabled ? 0 : -EBUSY;
-}
-
-static int r8a7740_pd_d4_suspend(void)
-{
-	/*
-	 * The D4 domain contains the Coresight-ETM hardware block and
-	 * therefore it should only be turned off if the debug module is
-	 * not in use.
-	 */
-	return -EBUSY;
-}
-
-static struct rmobile_pm_domain r8a7740_pm_domains[] = {
-	{
-		.genpd.name	= "A4LC",
-		.base		= SYSC_BASE,
-		.bit_shift	= 1,
-	}, {
-		.genpd.name	= "A4MP",
-		.base		= SYSC_BASE,
-		.bit_shift	= 2,
-	}, {
-		.genpd.name	= "D4",
-		.base		= SYSC_BASE,
-		.bit_shift	= 3,
-		.gov		= &pm_domain_always_on_gov,
-		.suspend	= r8a7740_pd_d4_suspend,
-	}, {
-		.genpd.name	= "A4R",
-		.base		= SYSC_BASE,
-		.bit_shift	= 5,
-	}, {
-		.genpd.name	= "A3RV",
-		.base		= SYSC_BASE,
-		.bit_shift	= 6,
-	}, {
-		.genpd.name	= "A4S",
-		.base		= SYSC_BASE,
-		.bit_shift	= 10,
-		.no_debug	= true,
-	}, {
-		.genpd.name	= "A3SP",
-		.base		= SYSC_BASE,
-		.bit_shift	= 11,
-		.gov		= &pm_domain_always_on_gov,
-		.no_debug	= true,
-		.suspend	= r8a7740_pd_a3sp_suspend,
-	}, {
-		.genpd.name	= "A3SM",
-		.base		= SYSC_BASE,
-		.bit_shift	= 12,
-		.gov		= &pm_domain_always_on_gov,
-		.suspend	= r8a7740_pd_a3sm_suspend,
-	}, {
-		.genpd.name	= "A3SG",
-		.base		= SYSC_BASE,
-		.bit_shift	= 13,
-	}, {
-		.genpd.name	= "A4SU",
-		.base		= SYSC_BASE,
-		.bit_shift	= 20,
-	},
-};
-
-void __init r8a7740_init_pm_domains(void)
-{
-	rmobile_init_domains(r8a7740_pm_domains, ARRAY_SIZE(r8a7740_pm_domains));
-	pm_genpd_add_subdomain_names("A4R", "A3RV");
-	pm_genpd_add_subdomain_names("A4S", "A3SP");
-	pm_genpd_add_subdomain_names("A4S", "A3SM");
-	pm_genpd_add_subdomain_names("A4S", "A3SG");
-}
-#endif /* CONFIG_PM && !CONFIG_ARCH_MULTIPLATFORM */
-
-#ifdef CONFIG_SUSPEND
-static int r8a7740_enter_suspend(suspend_state_t suspend_state)
-{
-	cpu_do_idle();
-	return 0;
-}
-
-static void r8a7740_suspend_init(void)
-{
-	shmobile_suspend_ops.enter = r8a7740_enter_suspend;
-}
-#else
-static void r8a7740_suspend_init(void) {}
-#endif
-
-void __init r8a7740_pm_init(void)
-{
-	r8a7740_suspend_init();
-}
diff --git a/arch/arm/mach-shmobile/r8a7740.h b/arch/arm/mach-shmobile/r8a7740.h
deleted file mode 100644
index ca7805ad7ea3..000000000000
--- a/arch/arm/mach-shmobile/r8a7740.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_R8A7740_H__
-#define __ASM_R8A7740_H__
-
-/*
- * MD_CKx pin
- */
-#define MD_CK2	(1 << 2)
-#define MD_CK1	(1 << 1)
-#define MD_CK0	(1 << 0)
-
-/* DMA slave IDs */
-enum {
-	SHDMA_SLAVE_INVALID,
-	SHDMA_SLAVE_SDHI0_RX,
-	SHDMA_SLAVE_SDHI0_TX,
-	SHDMA_SLAVE_SDHI1_RX,
-	SHDMA_SLAVE_SDHI1_TX,
-	SHDMA_SLAVE_SDHI2_RX,
-	SHDMA_SLAVE_SDHI2_TX,
-	SHDMA_SLAVE_FSIA_RX,
-	SHDMA_SLAVE_FSIA_TX,
-	SHDMA_SLAVE_FSIB_TX,
-	SHDMA_SLAVE_USBHS_TX,
-	SHDMA_SLAVE_USBHS_RX,
-	SHDMA_SLAVE_MMCIF_TX,
-	SHDMA_SLAVE_MMCIF_RX,
-};
-
-extern void r8a7740_meram_workaround(void);
-extern void r8a7740_init_irq_of(void);
-extern void r8a7740_map_io(void);
-extern void r8a7740_add_early_devices(void);
-extern void r8a7740_add_standard_devices(void);
-extern void r8a7740_clock_init(u8 md_ck);
-extern void r8a7740_pinmux_init(void);
-extern void r8a7740_pm_init(void);
-
-#if defined(CONFIG_PM) && !defined(CONFIG_ARCH_MULTIPLATFORM)
-extern void __init r8a7740_init_pm_domains(void);
-#else
-static inline void r8a7740_init_pm_domains(void) {}
-#endif /* CONFIG_PM && !CONFIG_ARCH_MULTIPLATFORM */
-
-#endif /* __ASM_R8A7740_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 00291cc1772d..a158b0bf7762 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -13,31 +13,19 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
-#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/irqchip.h>
 #include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/irq-renesas-intc-irqpin.h>
-#include <linux/platform_device.h>
 #include <linux/of_platform.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
-#include <linux/platform_data/sh_ipmmu.h>
 
-#include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/hardware/cache-l2x0.h>
 
 #include "common.h"
-#include "dma-register.h"
-#include "irqs.h"
-#include "pm-rmobile.h"
-#include "r8a7740.h"
 
 static struct map_desc r8a7740_io_desc[] __initdata = {
 	 /*
@@ -64,613 +52,12 @@ static struct map_desc r8a7740_io_desc[] __initdata = {
 #endif
 };
 
-void __init r8a7740_map_io(void)
+static void __init r8a7740_map_io(void)
 {
 	debug_ll_io_init();
 	iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc));
 }
 
-/* PFC */
-static const struct resource pfc_resources[] = {
-	DEFINE_RES_MEM(0xe6050000, 0x8000),
-	DEFINE_RES_MEM(0xe605800c, 0x0020),
-};
-
-void __init r8a7740_pinmux_init(void)
-{
-	platform_device_register_simple("pfc-r8a7740", -1, pfc_resources,
-					ARRAY_SIZE(pfc_resources));
-}
-
-static struct renesas_intc_irqpin_config irqpin0_platform_data = {
-	.irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */
-};
-
-static struct resource irqpin0_resources[] = {
-	DEFINE_RES_MEM(0xe6900000, 4), /* ICR1A */
-	DEFINE_RES_MEM(0xe6900010, 4), /* INTPRI00A */
-	DEFINE_RES_MEM(0xe6900020, 1), /* INTREQ00A */
-	DEFINE_RES_MEM(0xe6900040, 1), /* INTMSK00A */
-	DEFINE_RES_MEM(0xe6900060, 1), /* INTMSKCLR00A */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ0 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ1 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ2 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ3 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ4 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ5 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ6 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ7 */
-};
-
-static struct platform_device irqpin0_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 0,
-	.resource	= irqpin0_resources,
-	.num_resources	= ARRAY_SIZE(irqpin0_resources),
-	.dev		= {
-		.platform_data  = &irqpin0_platform_data,
-	},
-};
-
-static struct renesas_intc_irqpin_config irqpin1_platform_data = {
-	.irq_base = irq_pin(8), /* IRQ8 -> IRQ15 */
-};
-
-static struct resource irqpin1_resources[] = {
-	DEFINE_RES_MEM(0xe6900004, 4), /* ICR2A */
-	DEFINE_RES_MEM(0xe6900014, 4), /* INTPRI10A */
-	DEFINE_RES_MEM(0xe6900024, 1), /* INTREQ10A */
-	DEFINE_RES_MEM(0xe6900044, 1), /* INTMSK10A */
-	DEFINE_RES_MEM(0xe6900064, 1), /* INTMSKCLR10A */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ8 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ9 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ10 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ11 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ12 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ13 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ14 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ15 */
-};
-
-static struct platform_device irqpin1_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 1,
-	.resource	= irqpin1_resources,
-	.num_resources	= ARRAY_SIZE(irqpin1_resources),
-	.dev		= {
-		.platform_data  = &irqpin1_platform_data,
-	},
-};
-
-static struct renesas_intc_irqpin_config irqpin2_platform_data = {
-	.irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */
-};
-
-static struct resource irqpin2_resources[] = {
-	DEFINE_RES_MEM(0xe6900008, 4), /* ICR3A */
-	DEFINE_RES_MEM(0xe6900018, 4), /* INTPRI30A */
-	DEFINE_RES_MEM(0xe6900028, 1), /* INTREQ30A */
-	DEFINE_RES_MEM(0xe6900048, 1), /* INTMSK30A */
-	DEFINE_RES_MEM(0xe6900068, 1), /* INTMSKCLR30A */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ16 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ17 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ18 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ19 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ20 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ21 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ22 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ23 */
-};
-
-static struct platform_device irqpin2_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 2,
-	.resource	= irqpin2_resources,
-	.num_resources	= ARRAY_SIZE(irqpin2_resources),
-	.dev		= {
-		.platform_data  = &irqpin2_platform_data,
-	},
-};
-
-static struct renesas_intc_irqpin_config irqpin3_platform_data = {
-	.irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */
-};
-
-static struct resource irqpin3_resources[] = {
-	DEFINE_RES_MEM(0xe690000c, 4), /* ICR3A */
-	DEFINE_RES_MEM(0xe690001c, 4), /* INTPRI30A */
-	DEFINE_RES_MEM(0xe690002c, 1), /* INTREQ30A */
-	DEFINE_RES_MEM(0xe690004c, 1), /* INTMSK30A */
-	DEFINE_RES_MEM(0xe690006c, 1), /* INTMSKCLR30A */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ24 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ25 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ26 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ27 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ28 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ29 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ30 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ31 */
-};
-
-static struct platform_device irqpin3_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 3,
-	.resource	= irqpin3_resources,
-	.num_resources	= ARRAY_SIZE(irqpin3_resources),
-	.dev		= {
-		.platform_data  = &irqpin3_platform_data,
-	},
-};
-
-/* SCIF */
-#define R8A7740_SCIF(scif_type, index, baseaddr, irq)		\
-static struct plat_sci_port scif##index##_platform_data = {	\
-	.type		= scif_type,				\
-	.flags		= UPF_BOOT_AUTOCONF,			\
-	.scscr		= SCSCR_RE | SCSCR_TE,			\
-};								\
-								\
-static struct resource scif##index##_resources[] = {		\
-	DEFINE_RES_MEM(baseaddr, 0x100),			\
-	DEFINE_RES_IRQ(irq),					\
-};								\
-								\
-static struct platform_device scif##index##_device = {		\
-	.name		= "sh-sci",				\
-	.id		= index,				\
-	.resource	= scif##index##_resources,		\
-	.num_resources	= ARRAY_SIZE(scif##index##_resources),	\
-	.dev		= {					\
-		.platform_data	= &scif##index##_platform_data,	\
-	},							\
-}
-
-R8A7740_SCIF(PORT_SCIFA, 0, 0xe6c40000, gic_spi(100));
-R8A7740_SCIF(PORT_SCIFA, 1, 0xe6c50000, gic_spi(101));
-R8A7740_SCIF(PORT_SCIFA, 2, 0xe6c60000, gic_spi(102));
-R8A7740_SCIF(PORT_SCIFA, 3, 0xe6c70000, gic_spi(103));
-R8A7740_SCIF(PORT_SCIFA, 4, 0xe6c80000, gic_spi(104));
-R8A7740_SCIF(PORT_SCIFA, 5, 0xe6cb0000, gic_spi(105));
-R8A7740_SCIF(PORT_SCIFA, 6, 0xe6cc0000, gic_spi(106));
-R8A7740_SCIF(PORT_SCIFA, 7, 0xe6cd0000, gic_spi(107));
-R8A7740_SCIF(PORT_SCIFB, 8, 0xe6c30000, gic_spi(108));
-
-/* CMT */
-static struct sh_timer_config cmt1_platform_data = {
-	.channels_mask = 0x3f,
-};
-
-static struct resource cmt1_resources[] = {
-	DEFINE_RES_MEM(0xe6138000, 0x170),
-	DEFINE_RES_IRQ(gic_spi(58)),
-};
-
-static struct platform_device cmt1_device = {
-	.name		= "sh-cmt-48",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &cmt1_platform_data,
-	},
-	.resource	= cmt1_resources,
-	.num_resources	= ARRAY_SIZE(cmt1_resources),
-};
-
-/* TMU */
-static struct sh_timer_config tmu0_platform_data = {
-	.channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
-	DEFINE_RES_MEM(0xfff80000, 0x2c),
-	DEFINE_RES_IRQ(gic_spi(198)),
-	DEFINE_RES_IRQ(gic_spi(199)),
-	DEFINE_RES_IRQ(gic_spi(200)),
-};
-
-static struct platform_device tmu0_device = {
-	.name		= "sh-tmu",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &tmu0_platform_data,
-	},
-	.resource	= tmu0_resources,
-	.num_resources	= ARRAY_SIZE(tmu0_resources),
-};
-
-/* IPMMUI (an IPMMU module for ICB/LMB) */
-static struct resource ipmmu_resources[] = {
-	[0] = {
-		.name	= "IPMMUI",
-		.start	= 0xfe951000,
-		.end	= 0xfe9510ff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static const char * const ipmmu_dev_names[] = {
-	"sh_mobile_lcdc_fb.0",
-	"sh_mobile_lcdc_fb.1",
-	"sh_mobile_ceu.0",
-};
-
-static struct shmobile_ipmmu_platform_data ipmmu_platform_data = {
-	.dev_names = ipmmu_dev_names,
-	.num_dev_names = ARRAY_SIZE(ipmmu_dev_names),
-};
-
-static struct platform_device ipmmu_device = {
-	.name           = "ipmmu",
-	.id             = -1,
-	.dev = {
-		.platform_data = &ipmmu_platform_data,
-	},
-	.resource       = ipmmu_resources,
-	.num_resources  = ARRAY_SIZE(ipmmu_resources),
-};
-
-static struct platform_device *r8a7740_early_devices[] __initdata = {
-	&scif0_device,
-	&scif1_device,
-	&scif2_device,
-	&scif3_device,
-	&scif4_device,
-	&scif5_device,
-	&scif6_device,
-	&scif7_device,
-	&scif8_device,
-	&irqpin0_device,
-	&irqpin1_device,
-	&irqpin2_device,
-	&irqpin3_device,
-	&tmu0_device,
-	&ipmmu_device,
-	&cmt1_device,
-};
-
-/* DMA */
-static const struct sh_dmae_slave_config r8a7740_dmae_slaves[] = {
-	{
-		.slave_id	= SHDMA_SLAVE_SDHI0_TX,
-		.addr		= 0xe6850030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc1,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI0_RX,
-		.addr		= 0xe6850030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc2,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI1_TX,
-		.addr		= 0xe6860030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc9,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI1_RX,
-		.addr		= 0xe6860030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xca,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI2_TX,
-		.addr		= 0xe6870030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xcd,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI2_RX,
-		.addr		= 0xe6870030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xce,
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSIA_TX,
-		.addr		= 0xfe1f0024,
-		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xb1,
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSIA_RX,
-		.addr		= 0xfe1f0020,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xb2,
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSIB_TX,
-		.addr		= 0xfe1f0064,
-		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xb5,
-	}, {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-		.addr		= 0xe6bd0034,
-		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd1,
-	}, {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-		.addr		= 0xe6bd0034,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd2,
-	},
-};
-
-#define DMA_CHANNEL(a, b, c)			\
-{						\
-	.offset		= a,			\
-	.dmars		= b,			\
-	.dmars_bit	= c,			\
-	.chclr_offset	= (0x220 - 0x20) + a	\
-}
-
-static const struct sh_dmae_channel r8a7740_dmae_channels[] = {
-	DMA_CHANNEL(0x00, 0, 0),
-	DMA_CHANNEL(0x10, 0, 8),
-	DMA_CHANNEL(0x20, 4, 0),
-	DMA_CHANNEL(0x30, 4, 8),
-	DMA_CHANNEL(0x50, 8, 0),
-	DMA_CHANNEL(0x60, 8, 8),
-};
-
-static struct sh_dmae_pdata dma_platform_data = {
-	.slave		= r8a7740_dmae_slaves,
-	.slave_num	= ARRAY_SIZE(r8a7740_dmae_slaves),
-	.channel	= r8a7740_dmae_channels,
-	.channel_num	= ARRAY_SIZE(r8a7740_dmae_channels),
-	.ts_low_shift	= TS_LOW_SHIFT,
-	.ts_low_mask	= TS_LOW_BIT << TS_LOW_SHIFT,
-	.ts_high_shift	= TS_HI_SHIFT,
-	.ts_high_mask	= TS_HI_BIT << TS_HI_SHIFT,
-	.ts_shift	= dma_ts_shift,
-	.ts_shift_num	= ARRAY_SIZE(dma_ts_shift),
-	.dmaor_init	= DMAOR_DME,
-	.chclr_present	= 1,
-};
-
-/* Resource order important! */
-static struct resource r8a7740_dmae0_resources[] = {
-	{
-		/* Channel registers and DMAOR */
-		.start	= 0xfe008020,
-		.end	= 0xfe00828f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* DMARSx */
-		.start	= 0xfe009000,
-		.end	= 0xfe00900b,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "error_irq",
-		.start	= gic_spi(34),
-		.end	= gic_spi(34),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		/* IRQ for channels 0-5 */
-		.start	= gic_spi(28),
-		.end	= gic_spi(33),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-/* Resource order important! */
-static struct resource r8a7740_dmae1_resources[] = {
-	{
-		/* Channel registers and DMAOR */
-		.start	= 0xfe018020,
-		.end	= 0xfe01828f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* DMARSx */
-		.start	= 0xfe019000,
-		.end	= 0xfe01900b,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "error_irq",
-		.start	= gic_spi(41),
-		.end	= gic_spi(41),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		/* IRQ for channels 0-5 */
-		.start	= gic_spi(35),
-		.end	= gic_spi(40),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-/* Resource order important! */
-static struct resource r8a7740_dmae2_resources[] = {
-	{
-		/* Channel registers and DMAOR */
-		.start	= 0xfe028020,
-		.end	= 0xfe02828f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* DMARSx */
-		.start	= 0xfe029000,
-		.end	= 0xfe02900b,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "error_irq",
-		.start	= gic_spi(48),
-		.end	= gic_spi(48),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		/* IRQ for channels 0-5 */
-		.start	= gic_spi(42),
-		.end	= gic_spi(47),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dma0_device = {
-	.name		= "sh-dma-engine",
-	.id		= 0,
-	.resource	= r8a7740_dmae0_resources,
-	.num_resources	= ARRAY_SIZE(r8a7740_dmae0_resources),
-	.dev		= {
-		.platform_data	= &dma_platform_data,
-	},
-};
-
-static struct platform_device dma1_device = {
-	.name		= "sh-dma-engine",
-	.id		= 1,
-	.resource	= r8a7740_dmae1_resources,
-	.num_resources	= ARRAY_SIZE(r8a7740_dmae1_resources),
-	.dev		= {
-		.platform_data	= &dma_platform_data,
-	},
-};
-
-static struct platform_device dma2_device = {
-	.name		= "sh-dma-engine",
-	.id		= 2,
-	.resource	= r8a7740_dmae2_resources,
-	.num_resources	= ARRAY_SIZE(r8a7740_dmae2_resources),
-	.dev		= {
-		.platform_data	= &dma_platform_data,
-	},
-};
-
-/* USB-DMAC */
-static const struct sh_dmae_channel r8a7740_usb_dma_channels[] = {
-	{
-		.offset = 0,
-	}, {
-		.offset = 0x20,
-	},
-};
-
-static const struct sh_dmae_slave_config r8a7740_usb_dma_slaves[] = {
-	{
-		.slave_id	= SHDMA_SLAVE_USBHS_TX,
-		.chcr		= USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE),
-	}, {
-		.slave_id	= SHDMA_SLAVE_USBHS_RX,
-		.chcr		= USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE),
-	},
-};
-
-static struct sh_dmae_pdata usb_dma_platform_data = {
-	.slave		= r8a7740_usb_dma_slaves,
-	.slave_num	= ARRAY_SIZE(r8a7740_usb_dma_slaves),
-	.channel	= r8a7740_usb_dma_channels,
-	.channel_num	= ARRAY_SIZE(r8a7740_usb_dma_channels),
-	.ts_low_shift	= USBTS_LOW_SHIFT,
-	.ts_low_mask	= USBTS_LOW_BIT << USBTS_LOW_SHIFT,
-	.ts_high_shift	= USBTS_HI_SHIFT,
-	.ts_high_mask	= USBTS_HI_BIT << USBTS_HI_SHIFT,
-	.ts_shift	= dma_usbts_shift,
-	.ts_shift_num	= ARRAY_SIZE(dma_usbts_shift),
-	.dmaor_init	= DMAOR_DME,
-	.chcr_offset	= 0x14,
-	.chcr_ie_bit	= 1 << 5,
-	.dmaor_is_32bit	= 1,
-	.needs_tend_set	= 1,
-	.no_dmars	= 1,
-	.slave_only	= 1,
-};
-
-static struct resource r8a7740_usb_dma_resources[] = {
-	{
-		/* Channel registers and DMAOR */
-		.start	= 0xe68a0020,
-		.end	= 0xe68a0064 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* VCR/SWR/DMICR */
-		.start	= 0xe68a0000,
-		.end	= 0xe68a0014 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* IRQ for channels */
-		.start	= gic_spi(49),
-		.end	= gic_spi(49),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb_dma_device = {
-	.name		= "sh-dma-engine",
-	.id		= 3,
-	.resource	= r8a7740_usb_dma_resources,
-	.num_resources	= ARRAY_SIZE(r8a7740_usb_dma_resources),
-	.dev		= {
-		.platform_data	= &usb_dma_platform_data,
-	},
-};
-
-/* I2C */
-static struct resource i2c0_resources[] = {
-	[0] = {
-		.name	= "IIC0",
-		.start	= 0xfff20000,
-		.end	= 0xfff20425 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(201),
-		.end	= gic_spi(204),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c1_resources[] = {
-	[0] = {
-		.name	= "IIC1",
-		.start	= 0xe6c20000,
-		.end	= 0xe6c20425 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(70), /* IIC1_ALI1 */
-		.end    = gic_spi(73), /* IIC1_DTEI1 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c0_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 0,
-	.resource	= i2c0_resources,
-	.num_resources	= ARRAY_SIZE(i2c0_resources),
-};
-
-static struct platform_device i2c1_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 1,
-	.resource	= i2c1_resources,
-	.num_resources	= ARRAY_SIZE(i2c1_resources),
-};
-
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start	= gic_spi(83),
-		.end	= gic_spi(83),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.name	= "armv7-pmu",
-	.id	= -1,
-	.num_resources = ARRAY_SIZE(pmu_resources),
-	.resource = pmu_resources,
-};
-
-static struct platform_device *r8a7740_late_devices[] __initdata = {
-	&i2c0_device,
-	&i2c1_device,
-	&dma0_device,
-	&dma1_device,
-	&dma2_device,
-	&usb_dma_device,
-	&pmu_device,
-};
-
 /*
  * r8a7740 chip has lasting errata on MERAM buffer.
  * this is work-around for it.
@@ -678,7 +65,7 @@ static struct platform_device *r8a7740_late_devices[] __initdata = {
  *	"Media RAM (MERAM)" on r8a7740 documentation
  */
 #define MEBUFCNTR	0xFE950098
-void __init r8a7740_meram_workaround(void)
+static void __init r8a7740_meram_workaround(void)
 {
 	void __iomem *reg;
 
@@ -689,70 +76,13 @@ void __init r8a7740_meram_workaround(void)
 	}
 }
 
-void __init r8a7740_add_standard_devices(void)
-{
-	static struct pm_domain_device domain_devices[] __initdata = {
-		{ "A4R",  &tmu0_device },
-		{ "A4R",  &i2c0_device },
-		{ "A4S",  &irqpin0_device },
-		{ "A4S",  &irqpin1_device },
-		{ "A4S",  &irqpin2_device },
-		{ "A4S",  &irqpin3_device },
-		{ "A3SP", &scif0_device },
-		{ "A3SP", &scif1_device },
-		{ "A3SP", &scif2_device },
-		{ "A3SP", &scif3_device },
-		{ "A3SP", &scif4_device },
-		{ "A3SP", &scif5_device },
-		{ "A3SP", &scif6_device },
-		{ "A3SP", &scif7_device },
-		{ "A3SP", &scif8_device },
-		{ "A3SP", &i2c1_device },
-		{ "A3SP", &ipmmu_device },
-		{ "A3SP", &dma0_device },
-		{ "A3SP", &dma1_device },
-		{ "A3SP", &dma2_device },
-		{ "A3SP", &usb_dma_device },
-	};
-
-	r8a7740_init_pm_domains();
-
-	/* add devices */
-	platform_add_devices(r8a7740_early_devices,
-			    ARRAY_SIZE(r8a7740_early_devices));
-	platform_add_devices(r8a7740_late_devices,
-			     ARRAY_SIZE(r8a7740_late_devices));
-
-	/* add devices to PM domain  */
-	rmobile_add_devices_to_domains(domain_devices,
-				       ARRAY_SIZE(domain_devices));
-}
-
-void __init r8a7740_add_early_devices(void)
-{
-	early_platform_add_devices(r8a7740_early_devices,
-				   ARRAY_SIZE(r8a7740_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
-}
-
-#ifdef CONFIG_USE_OF
-
-void __init r8a7740_init_irq_of(void)
+static void __init r8a7740_init_irq_of(void)
 {
 	void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
 	void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10);
 	void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4);
 
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
-	void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000);
-	void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000);
-
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-#else
 	irqchip_init();
-#endif
 
 	/* route signals to GIC */
 	iowrite32(0x0, pfc_inta_ctrl);
@@ -800,5 +130,3 @@ DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
 	.init_late	= shmobile_init_late,
 	.dt_compat	= r8a7740_boards_compat_dt,
 MACHINE_END
-
-#endif /* CONFIG_USE_OF */
-- 
2.1.4

[PATCH 11/16] ARM: shmobile: Remove legacy SoC code for R-Mobile A1

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last user of the R-Mobile A1 (r8a7740) legacy SoC code was the
Armadillo-800 EVA legacy board code, which has been removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[horms: resolved trivial conflicts with v4.2-rc1]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig         |   7 -
 arch/arm/mach-shmobile/Makefile        |   3 +-
 arch/arm/mach-shmobile/clock-r8a7740.c | 675 --------------------------------
 arch/arm/mach-shmobile/pm-r8a7740.c    | 129 -------
 arch/arm/mach-shmobile/r8a7740.h       |  58 ---
 arch/arm/mach-shmobile/setup-r8a7740.c | 678 +--------------------------------
 6 files changed, 4 insertions(+), 1546 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/clock-r8a7740.c
 delete mode 100644 arch/arm/mach-shmobile/pm-r8a7740.c
 delete mode 100644 arch/arm/mach-shmobile/r8a7740.h

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 49d455c0c39e..bfe92bc96a47 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -103,13 +103,6 @@ if ARCH_SHMOBILE_LEGACY
 
 comment "Renesas ARM SoCs System Type"
 
-config ARCH_R8A7740
-	bool "R-Mobile A1 (R8A77400)"
-	select ARCH_RMOBILE
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-	select RENESAS_INTC_IRQPIN
-
 config ARCH_R8A7778
 	bool "R-Car M1A (R8A77781)"
 	select ARCH_RCAR_GEN1
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 548536fcb3b1..726c219e5b13 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -8,7 +8,7 @@ obj-y				:= timer.o console.o
 # CPU objects
 obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o
 obj-$(CONFIG_ARCH_R8A73A4)	+= setup-r8a73a4.o
-obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o pm-r8a7740.o
+obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7778)	+= setup-r8a7778.o
 obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o pm-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o
@@ -20,7 +20,6 @@ obj-$(CONFIG_ARCH_R7S72100)	+= setup-r7s72100.o
 # Clock objects
 ifndef CONFIG_COMMON_CLK
 obj-y				+= clock.o
-obj-$(CONFIG_ARCH_R8A7740)	+= clock-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7778)	+= clock-r8a7778.o
 obj-$(CONFIG_ARCH_R8A7779)	+= clock-r8a7779.o
 endif
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
deleted file mode 100644
index 9cac8247c72b..000000000000
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ /dev/null
@@ -1,675 +0,0 @@
-/*
- * R8A7740 processor support
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-
-#include "clock.h"
-#include "common.h"
-#include "r8a7740.h"
-
-/*
- *        |  MDx  |  XTAL1/EXTAL1   |  System   | EXTALR |
- *  Clock |-------+-----------------+  clock    | 32.768 |   RCLK
- *  Mode  | 2/1/0 | src         MHz |  source   |  KHz   |  source
- * -------+-------+-----------------+-----------+--------+----------
- *    0   | 0 0 0 | External  20~50 | XTAL1     |    O   |  EXTALR
- *    1   | 0 0 1 | Crystal   20~30 | XTAL1     |    O   |  EXTALR
- *    2   | 0 1 0 | External  40~50 | XTAL1 / 2 |    O   |  EXTALR
- *    3   | 0 1 1 | Crystal   40~50 | XTAL1 / 2 |    O   |  EXTALR
- *    4   | 1 0 0 | External  20~50 | XTAL1     |    x   |  XTAL1 / 1024
- *    5   | 1 0 1 | Crystal   20~30 | XTAL1     |    x   |  XTAL1 / 1024
- *    6   | 1 1 0 | External  40~50 | XTAL1 / 2 |    x   |  XTAL1 / 2048
- *    7   | 1 1 1 | Crystal   40~50 | XTAL1 / 2 |    x   |  XTAL1 / 2048
- */
-
-/* CPG registers */
-#define FRQCRA		IOMEM(0xe6150000)
-#define FRQCRB		IOMEM(0xe6150004)
-#define VCLKCR1		IOMEM(0xE6150008)
-#define VCLKCR2		IOMEM(0xE615000c)
-#define FRQCRC		IOMEM(0xe61500e0)
-#define FSIACKCR	IOMEM(0xe6150018)
-#define PLLC01CR	IOMEM(0xe6150028)
-
-#define SUBCKCR		IOMEM(0xe6150080)
-#define USBCKCR		IOMEM(0xe615008c)
-
-#define MSTPSR0		IOMEM(0xe6150030)
-#define MSTPSR1		IOMEM(0xe6150038)
-#define MSTPSR2		IOMEM(0xe6150040)
-#define MSTPSR3		IOMEM(0xe6150048)
-#define MSTPSR4		IOMEM(0xe615004c)
-#define FSIBCKCR	IOMEM(0xe6150090)
-#define HDMICKCR	IOMEM(0xe6150094)
-#define SMSTPCR0	IOMEM(0xe6150130)
-#define SMSTPCR1	IOMEM(0xe6150134)
-#define SMSTPCR2	IOMEM(0xe6150138)
-#define SMSTPCR3	IOMEM(0xe615013c)
-#define SMSTPCR4	IOMEM(0xe6150140)
-
-#define FSIDIVA		IOMEM(0xFE1F8000)
-#define FSIDIVB		IOMEM(0xFE1F8008)
-
-/* Fixed 32 KHz root clock from EXTALR pin */
-static struct clk extalr_clk = {
-	.rate	= 32768,
-};
-
-/*
- * 25MHz default rate for the EXTAL1 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-static struct clk extal1_clk = {
-	.rate	= 25000000,
-};
-
-/*
- * 48MHz default rate for the EXTAL2 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-static struct clk extal2_clk = {
-	.rate	= 48000000,
-};
-
-/*
- * 27MHz default rate for the DV_CLKI root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-static struct clk dv_clk = {
-	.rate	= 27000000,
-};
-
-SH_CLK_RATIO(div2,	1, 2);
-SH_CLK_RATIO(div1k,	1, 1024);
-
-SH_FIXED_RATIO_CLK(extal1_div2_clk,	extal1_clk,		div2);
-SH_FIXED_RATIO_CLK(extal1_div1024_clk,	extal1_clk,		div1k);
-SH_FIXED_RATIO_CLK(extal1_div2048_clk,	extal1_div2_clk,	div1k);
-SH_FIXED_RATIO_CLK(extal2_div2_clk,	extal2_clk,		div2);
-
-static struct sh_clk_ops followparent_clk_ops = {
-	.recalc	= followparent_recalc,
-};
-
-/* Main clock */
-static struct clk system_clk = {
-	.ops	= &followparent_clk_ops,
-};
-
-SH_FIXED_RATIO_CLK(system_div2_clk, system_clk,	div2);
-
-/* r_clk */
-static struct clk r_clk = {
-	.ops	= &followparent_clk_ops,
-};
-
-/* PLLC0/PLLC1 */
-static unsigned long pllc01_recalc(struct clk *clk)
-{
-	unsigned long mult = 1;
-
-	if (__raw_readl(PLLC01CR) & (1 << 14))
-		mult = ((__raw_readl(clk->enable_reg) >> 24) & 0x7f) + 1;
-
-	return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops pllc01_clk_ops = {
-	.recalc		= pllc01_recalc,
-};
-
-static struct clk pllc0_clk = {
-	.ops		= &pllc01_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &system_clk,
-	.enable_reg	= (void __iomem *)FRQCRC,
-};
-
-static struct clk pllc1_clk = {
-	.ops		= &pllc01_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &system_div2_clk,
-	.enable_reg	= (void __iomem *)FRQCRA,
-};
-
-/* PLLC1 / 2 */
-SH_FIXED_RATIO_CLK(pllc1_div2_clk, pllc1_clk, div2);
-
-/* USB clock */
-/*
- * USBCKCR is controlling usb24 clock
- * bit[7] : parent clock
- * bit[6] : clock divide rate
- * And this bit[7] is used as a "usb24s" from other devices.
- * (Video clock / Sub clock / SPU clock)
- * You can controll this clock as a below.
- *
- * struct clk *usb24	= clk_get(dev,  "usb24");
- * struct clk *usb24s	= clk_get(NULL, "usb24s");
- * struct clk *system	= clk_get(NULL, "system_clk");
- * int rate = clk_get_rate(system);
- *
- * clk_set_parent(usb24s, system);  // for bit[7]
- * clk_set_rate(usb24, rate / 2);   // for bit[6]
- */
-static struct clk *usb24s_parents[] = {
-	[0] = &system_clk,
-	[1] = &extal2_clk
-};
-
-static int usb24s_enable(struct clk *clk)
-{
-	__raw_writel(__raw_readl(USBCKCR) & ~(1 << 8), USBCKCR);
-
-	return 0;
-}
-
-static void usb24s_disable(struct clk *clk)
-{
-	__raw_writel(__raw_readl(USBCKCR) | (1 << 8), USBCKCR);
-}
-
-static int usb24s_set_parent(struct clk *clk, struct clk *parent)
-{
-	int i, ret;
-	u32 val;
-
-	if (!clk->parent_table || !clk->parent_num)
-		return -EINVAL;
-
-	/* Search the parent */
-	for (i = 0; i < clk->parent_num; i++)
-		if (clk->parent_table[i] == parent)
-			break;
-
-	if (i == clk->parent_num)
-		return -ENODEV;
-
-	ret = clk_reparent(clk, parent);
-	if (ret < 0)
-		return ret;
-
-	val = __raw_readl(USBCKCR);
-	val &= ~(1 << 7);
-	val |= i << 7;
-	__raw_writel(val, USBCKCR);
-
-	return 0;
-}
-
-static struct sh_clk_ops usb24s_clk_ops = {
-	.recalc		= followparent_recalc,
-	.enable		= usb24s_enable,
-	.disable	= usb24s_disable,
-	.set_parent	= usb24s_set_parent,
-};
-
-static struct clk usb24s_clk = {
-	.ops		= &usb24s_clk_ops,
-	.parent_table	= usb24s_parents,
-	.parent_num	= ARRAY_SIZE(usb24s_parents),
-	.parent		= &system_clk,
-};
-
-static unsigned long usb24_recalc(struct clk *clk)
-{
-	return clk->parent->rate /
-		((__raw_readl(USBCKCR) & (1 << 6)) ? 1 : 2);
-};
-
-static int usb24_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 val;
-
-	/* closer to which ? parent->rate or parent->rate/2 */
-	val = __raw_readl(USBCKCR);
-	val &= ~(1 << 6);
-	val |= (rate > (clk->parent->rate / 4) * 3) << 6;
-	__raw_writel(val, USBCKCR);
-
-	return 0;
-}
-
-static struct sh_clk_ops usb24_clk_ops = {
-	.recalc		= usb24_recalc,
-	.set_rate	= usb24_set_rate,
-};
-
-static struct clk usb24_clk = {
-	.ops		= &usb24_clk_ops,
-	.parent		= &usb24s_clk,
-};
-
-/* External FSIACK/FSIBCK clock */
-static struct clk fsiack_clk = {
-};
-
-static struct clk fsibck_clk = {
-};
-
-static struct clk *main_clks[] = {
-	&extalr_clk,
-	&extal1_clk,
-	&extal2_clk,
-	&extal1_div2_clk,
-	&extal1_div1024_clk,
-	&extal1_div2048_clk,
-	&extal2_div2_clk,
-	&dv_clk,
-	&system_clk,
-	&system_div2_clk,
-	&r_clk,
-	&pllc0_clk,
-	&pllc1_clk,
-	&pllc1_div2_clk,
-	&usb24s_clk,
-	&usb24_clk,
-	&fsiack_clk,
-	&fsibck_clk,
-};
-
-/* DIV4 clocks */
-static void div4_kick(struct clk *clk)
-{
-	unsigned long value;
-
-	/* set KICK bit in FRQCRB to update hardware setting */
-	value = __raw_readl(FRQCRB);
-	value |= (1 << 31);
-	__raw_writel(value, FRQCRB);
-}
-
-static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
-			  24, 32, 36, 48, 0, 72, 96, 0 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
-	.divisors = divisors,
-	.nr_divisors = ARRAY_SIZE(divisors),
-};
-
-static struct clk_div4_table div4_table = {
-	.div_mult_table = &div4_div_mult_table,
-	.kick = div4_kick,
-};
-
-enum {
-	DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP,
-	DIV4_HPP, DIV4_USBP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP,
-	DIV4_NR
-};
-
-static struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_ZG]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_B]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA,  8, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_M1]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA,  4, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_HP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRB,  4, 0x6fff, 0),
-	[DIV4_HPP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 20, 0x6fff, 0),
-	[DIV4_USBP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 16, 0x6fff, 0),
-	[DIV4_S]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 12, 0x6fff, 0),
-	[DIV4_ZB]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  8, 0x6fff, 0),
-	[DIV4_M3]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  4, 0x6fff, 0),
-	[DIV4_CP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  0, 0x6fff, 0),
-};
-
-/* DIV6 reparent */
-enum {
-	DIV6_HDMI,
-	DIV6_VCLK1, DIV6_VCLK2,
-	DIV6_FSIA, DIV6_FSIB,
-	DIV6_REPARENT_NR,
-};
-
-static struct clk *hdmi_parent[] = {
-	[0] = &pllc1_div2_clk,
-	[1] = &system_clk,
-	[2] = &dv_clk
-};
-
-static struct clk *vclk_parents[8] = {
-	[0] = &pllc1_div2_clk,
-	[2] = &dv_clk,
-	[3] = &usb24s_clk,
-	[4] = &extal1_div2_clk,
-	[5] = &extalr_clk,
-};
-
-static struct clk *fsia_parents[] = {
-	[0] = &pllc1_div2_clk,
-	[1] = &fsiack_clk, /* external clock */
-};
-
-static struct clk *fsib_parents[] = {
-	[0] = &pllc1_div2_clk,
-	[1] = &fsibck_clk, /* external clock */
-};
-
-static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
-	[DIV6_HDMI] = SH_CLK_DIV6_EXT(HDMICKCR, 0,
-				      hdmi_parent, ARRAY_SIZE(hdmi_parent), 6, 2),
-	[DIV6_VCLK1] = SH_CLK_DIV6_EXT(VCLKCR1, 0,
-				       vclk_parents, ARRAY_SIZE(vclk_parents), 12, 3),
-	[DIV6_VCLK2] = SH_CLK_DIV6_EXT(VCLKCR2, 0,
-				       vclk_parents, ARRAY_SIZE(vclk_parents), 12, 3),
-	[DIV6_FSIA] = SH_CLK_DIV6_EXT(FSIACKCR, 0,
-				      fsia_parents, ARRAY_SIZE(fsia_parents), 6, 2),
-	[DIV6_FSIB] = SH_CLK_DIV6_EXT(FSIBCKCR, 0,
-				      fsib_parents, ARRAY_SIZE(fsib_parents), 6, 2),
-};
-
-/* DIV6 clocks */
-enum {
-	DIV6_SUB,
-	DIV6_NR
-};
-
-static struct clk div6_clks[DIV6_NR] = {
-	[DIV6_SUB]	= SH_CLK_DIV6(&pllc1_div2_clk, SUBCKCR, 0),
-};
-
-/* HDMI1/2 clock */
-static unsigned long hdmi12_recalc(struct clk *clk)
-{
-	u32 val = __raw_readl(HDMICKCR);
-	int shift = (int)clk->priv;
-
-	val >>= shift;
-	val &= 0x3;
-
-	return clk->parent->rate / (1 << val);
-};
-
-static int hdmi12_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 val, mask;
-	int i, shift;
-
-	for (i = 0; i < 3; i++)
-		if (rate == clk->parent->rate / (1 << i))
-			goto find;
-	return -ENODEV;
-
-find:
-	shift = (int)clk->priv;
-
-	val = __raw_readl(HDMICKCR);
-	mask = ~(0x3 << shift);
-	val = (val & mask) | i << shift;
-	__raw_writel(val, HDMICKCR);
-
-	return 0;
-};
-
-static struct sh_clk_ops hdmi12_clk_ops = {
-	.recalc		= hdmi12_recalc,
-	.set_rate	= hdmi12_set_rate,
-};
-
-static struct clk hdmi1_clk = {
-	.ops		= &hdmi12_clk_ops,
-	.priv		= (void *)9,
-	.parent		= &div6_reparent_clks[DIV6_HDMI],  /* late install */
-};
-
-static struct clk hdmi2_clk = {
-	.ops		= &hdmi12_clk_ops,
-	.priv		= (void *)11,
-	.parent		= &div6_reparent_clks[DIV6_HDMI], /* late install */
-};
-
-static struct clk *late_main_clks[] = {
-	&hdmi1_clk,
-	&hdmi2_clk,
-};
-
-/* FSI DIV */
-enum { FSIDIV_A, FSIDIV_B, FSIDIV_REPARENT_NR };
-
-static struct clk fsidivs[] = {
-	[FSIDIV_A] = SH_CLK_FSIDIV(FSIDIVA, &div6_reparent_clks[DIV6_FSIA]),
-	[FSIDIV_B] = SH_CLK_FSIDIV(FSIDIVB, &div6_reparent_clks[DIV6_FSIB]),
-};
-
-/* MSTP */
-enum {
-	MSTP128, MSTP127, MSTP125,
-	MSTP116, MSTP111, MSTP100, MSTP117,
-
-	MSTP230, MSTP229,
-	MSTP222,
-	MSTP218, MSTP217, MSTP216, MSTP214,
-	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
-
-	MSTP329, MSTP328, MSTP323, MSTP320,
-	MSTP314, MSTP313, MSTP312,
-	MSTP309, MSTP304,
-
-	MSTP416, MSTP415, MSTP407, MSTP406,
-
-	MSTP_NR
-};
-
-static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP128] = SH_CLK_MSTP32(&div4_clks[DIV4_S],	SMSTPCR1, 28, 0), /* CEU21 */
-	[MSTP127] = SH_CLK_MSTP32(&div4_clks[DIV4_S],	SMSTPCR1, 27, 0), /* CEU20 */
-	[MSTP125] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR1, 25, 0), /* TMU0 */
-	[MSTP117] = SH_CLK_MSTP32(&div4_clks[DIV4_B],	SMSTPCR1, 17, 0), /* LCDC1 */
-	[MSTP116] = SH_CLK_MSTP32(&div4_clks[DIV4_HPP],	SMSTPCR1, 16, 0), /* IIC0 */
-	[MSTP111] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR1, 11, 0), /* TMU1 */
-	[MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_B],	SMSTPCR1,  0, 0), /* LCDC0 */
-
-	[MSTP230] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2, 30, 0), /* SCIFA6 */
-	[MSTP229] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR2, 29, 0), /* INTCA */
-	[MSTP222] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2, 22, 0), /* SCIFA7 */
-	[MSTP218] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],  SMSTPCR2, 18, 0), /* DMAC1 */
-	[MSTP217] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],  SMSTPCR2, 17, 0), /* DMAC2 */
-	[MSTP216] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],  SMSTPCR2, 16, 0), /* DMAC3 */
-	[MSTP214] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],  SMSTPCR2, 14, 0), /* USBDMAC */
-	[MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  7, 0), /* SCIFA5 */
-	[MSTP206] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  6, 0), /* SCIFB */
-	[MSTP204] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  4, 0), /* SCIFA0 */
-	[MSTP203] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  3, 0), /* SCIFA1 */
-	[MSTP202] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  2, 0), /* SCIFA2 */
-	[MSTP201] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  1, 0), /* SCIFA3 */
-	[MSTP200] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  0, 0), /* SCIFA4 */
-
-	[MSTP329] = SH_CLK_MSTP32(&r_clk,		SMSTPCR3, 29, 0), /* CMT10 */
-	[MSTP328] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 28, 0), /* FSI */
-	[MSTP323] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR3, 23, 0), /* IIC1 */
-	[MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 20, 0), /* USBF */
-	[MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 14, 0), /* SDHI0 */
-	[MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 13, 0), /* SDHI1 */
-	[MSTP312] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 12, 0), /* MMC */
-	[MSTP309] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3,  9, 0), /* GEther */
-	[MSTP304] = SH_CLK_MSTP32(&div4_clks[DIV4_CP],	SMSTPCR3,  4, 0), /* TPU0 */
-
-	[MSTP416] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 16, 0), /* USBHOST */
-	[MSTP415] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 15, 0), /* SDHI2 */
-	[MSTP407] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4,  7, 0), /* USB-Func */
-	[MSTP406] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4,  6, 0), /* USB Phy */
-};
-
-static struct clk_lookup lookups[] = {
-	/* main clocks */
-	CLKDEV_CON_ID("extalr",			&extalr_clk),
-	CLKDEV_CON_ID("extal1",			&extal1_clk),
-	CLKDEV_CON_ID("extal2",			&extal2_clk),
-	CLKDEV_CON_ID("extal1_div2",		&extal1_div2_clk),
-	CLKDEV_CON_ID("extal1_div1024",		&extal1_div1024_clk),
-	CLKDEV_CON_ID("extal1_div2048",		&extal1_div2048_clk),
-	CLKDEV_CON_ID("extal2_div2",		&extal2_div2_clk),
-	CLKDEV_CON_ID("dv_clk",			&dv_clk),
-	CLKDEV_CON_ID("system_clk",		&system_clk),
-	CLKDEV_CON_ID("system_div2_clk",	&system_div2_clk),
-	CLKDEV_CON_ID("r_clk",			&r_clk),
-	CLKDEV_CON_ID("pllc0_clk",		&pllc0_clk),
-	CLKDEV_CON_ID("pllc1_clk",		&pllc1_clk),
-	CLKDEV_CON_ID("pllc1_div2_clk",		&pllc1_div2_clk),
-	CLKDEV_CON_ID("usb24s",			&usb24s_clk),
-	CLKDEV_CON_ID("hdmi1",			&hdmi1_clk),
-	CLKDEV_CON_ID("hdmi2",			&hdmi2_clk),
-	CLKDEV_CON_ID("video1",			&div6_reparent_clks[DIV6_VCLK1]),
-	CLKDEV_CON_ID("video2",			&div6_reparent_clks[DIV6_VCLK2]),
-	CLKDEV_CON_ID("fsiack",			&fsiack_clk),
-	CLKDEV_CON_ID("fsibck",			&fsibck_clk),
-
-	/* DIV4 clocks */
-	CLKDEV_CON_ID("i_clk",			&div4_clks[DIV4_I]),
-	CLKDEV_CON_ID("zg_clk",			&div4_clks[DIV4_ZG]),
-	CLKDEV_CON_ID("b_clk",			&div4_clks[DIV4_B]),
-	CLKDEV_CON_ID("m1_clk",			&div4_clks[DIV4_M1]),
-	CLKDEV_CON_ID("hp_clk",			&div4_clks[DIV4_HP]),
-	CLKDEV_CON_ID("hpp_clk",		&div4_clks[DIV4_HPP]),
-	CLKDEV_CON_ID("s_clk",			&div4_clks[DIV4_S]),
-	CLKDEV_CON_ID("zb_clk",			&div4_clks[DIV4_ZB]),
-	CLKDEV_CON_ID("m3_clk",			&div4_clks[DIV4_M3]),
-	CLKDEV_CON_ID("cp_clk",			&div4_clks[DIV4_CP]),
-
-	/* DIV6 clocks */
-	CLKDEV_CON_ID("sub_clk",		&div6_clks[DIV6_SUB]),
-
-	/* MSTP32 clocks */
-	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0",	&mstp_clks[MSTP100]),
-	CLKDEV_DEV_ID("i2c-sh_mobile.0",	&mstp_clks[MSTP116]),
-	CLKDEV_DEV_ID("fff20000.i2c",		&mstp_clks[MSTP116]),
-	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1",	&mstp_clks[MSTP117]),
-	CLKDEV_DEV_ID("sh_mobile_ceu.0",	&mstp_clks[MSTP127]),
-	CLKDEV_DEV_ID("sh_mobile_ceu.1",	&mstp_clks[MSTP128]),
-
-	CLKDEV_DEV_ID("sh-sci.4",		&mstp_clks[MSTP200]),
-	CLKDEV_DEV_ID("e6c80000.serial",	&mstp_clks[MSTP200]),
-	CLKDEV_DEV_ID("sh-sci.3",		&mstp_clks[MSTP201]),
-	CLKDEV_DEV_ID("e6c70000.serial",	&mstp_clks[MSTP201]),
-	CLKDEV_DEV_ID("sh-sci.2",		&mstp_clks[MSTP202]),
-	CLKDEV_DEV_ID("e6c60000.serial",	&mstp_clks[MSTP202]),
-	CLKDEV_DEV_ID("sh-sci.1",		&mstp_clks[MSTP203]),
-	CLKDEV_DEV_ID("e6c50000.serial",	&mstp_clks[MSTP203]),
-	CLKDEV_DEV_ID("sh-sci.0",		&mstp_clks[MSTP204]),
-	CLKDEV_DEV_ID("e6c40000.serial",	&mstp_clks[MSTP204]),
-	CLKDEV_DEV_ID("sh-sci.8",		&mstp_clks[MSTP206]),
-	CLKDEV_DEV_ID("e6c30000.serial",	&mstp_clks[MSTP206]),
-	CLKDEV_DEV_ID("sh-sci.5",		&mstp_clks[MSTP207]),
-	CLKDEV_DEV_ID("e6cb0000.serial",	&mstp_clks[MSTP207]),
-	CLKDEV_DEV_ID("sh-dma-engine.3",	&mstp_clks[MSTP214]),
-	CLKDEV_DEV_ID("sh-dma-engine.2",	&mstp_clks[MSTP216]),
-	CLKDEV_DEV_ID("sh-dma-engine.1",	&mstp_clks[MSTP217]),
-	CLKDEV_DEV_ID("sh-dma-engine.0",	&mstp_clks[MSTP218]),
-	CLKDEV_DEV_ID("sh-sci.7",		&mstp_clks[MSTP222]),
-	CLKDEV_DEV_ID("e6cd0000.serial",	&mstp_clks[MSTP222]),
-	CLKDEV_DEV_ID("renesas_intc_irqpin.0",	&mstp_clks[MSTP229]),
-	CLKDEV_DEV_ID("renesas_intc_irqpin.1",	&mstp_clks[MSTP229]),
-	CLKDEV_DEV_ID("renesas_intc_irqpin.2",	&mstp_clks[MSTP229]),
-	CLKDEV_DEV_ID("renesas_intc_irqpin.3",	&mstp_clks[MSTP229]),
-	CLKDEV_DEV_ID("sh-sci.6",		&mstp_clks[MSTP230]),
-	CLKDEV_DEV_ID("e6cc0000.serial",	&mstp_clks[MSTP230]),
-
-	CLKDEV_DEV_ID("sh_fsi2",		&mstp_clks[MSTP328]),
-	CLKDEV_DEV_ID("fe1f0000.sound",		&mstp_clks[MSTP328]),
-	CLKDEV_DEV_ID("i2c-sh_mobile.1",	&mstp_clks[MSTP323]),
-	CLKDEV_DEV_ID("e6c20000.i2c",		&mstp_clks[MSTP323]),
-	CLKDEV_DEV_ID("renesas_usbhs",		&mstp_clks[MSTP320]),
-	CLKDEV_DEV_ID("sh_mobile_sdhi.0",	&mstp_clks[MSTP314]),
-	CLKDEV_DEV_ID("e6850000.sd",		&mstp_clks[MSTP314]),
-	CLKDEV_DEV_ID("sh_mobile_sdhi.1",	&mstp_clks[MSTP313]),
-	CLKDEV_DEV_ID("e6860000.sd",		&mstp_clks[MSTP313]),
-	CLKDEV_DEV_ID("sh_mmcif",		&mstp_clks[MSTP312]),
-	CLKDEV_DEV_ID("e6bd0000.mmc",		&mstp_clks[MSTP312]),
-	CLKDEV_DEV_ID("r8a7740-gether",		&mstp_clks[MSTP309]),
-	CLKDEV_DEV_ID("e9a00000.ethernet",	&mstp_clks[MSTP309]),
-	CLKDEV_DEV_ID("renesas-tpu-pwm",	&mstp_clks[MSTP304]),
-	CLKDEV_DEV_ID("e6600000.pwm",		&mstp_clks[MSTP304]),
-
-	CLKDEV_DEV_ID("sh_mobile_sdhi.2",	&mstp_clks[MSTP415]),
-	CLKDEV_DEV_ID("e6870000.sd",		&mstp_clks[MSTP415]),
-
-	/* ICK */
-	CLKDEV_ICK_ID("fck",	"sh-tmu.1",		&mstp_clks[MSTP111]),
-	CLKDEV_ICK_ID("fck",	"fff90000.timer",	&mstp_clks[MSTP111]),
-	CLKDEV_ICK_ID("fck",	"sh-tmu.0",		&mstp_clks[MSTP125]),
-	CLKDEV_ICK_ID("fck",	"fff80000.timer",	&mstp_clks[MSTP125]),
-	CLKDEV_ICK_ID("fck",	"sh-cmt-48.1",		&mstp_clks[MSTP329]),
-	CLKDEV_ICK_ID("fck",	"e6138000.timer",	&mstp_clks[MSTP329]),
-	CLKDEV_ICK_ID("host",	"renesas_usbhs",	&mstp_clks[MSTP416]),
-	CLKDEV_ICK_ID("func",	"renesas_usbhs",	&mstp_clks[MSTP407]),
-	CLKDEV_ICK_ID("phy",	"renesas_usbhs",	&mstp_clks[MSTP406]),
-	CLKDEV_ICK_ID("pci",	"renesas_usbhs",	&div4_clks[DIV4_USBP]),
-	CLKDEV_ICK_ID("usb24",	"renesas_usbhs",	&usb24_clk),
-	CLKDEV_ICK_ID("ick",	"sh-mobile-hdmi",	&div6_reparent_clks[DIV6_HDMI]),
-
-	CLKDEV_ICK_ID("icka", "sh_fsi2",	&div6_reparent_clks[DIV6_FSIA]),
-	CLKDEV_ICK_ID("ickb", "sh_fsi2",	&div6_reparent_clks[DIV6_FSIB]),
-	CLKDEV_ICK_ID("diva", "sh_fsi2",	&fsidivs[FSIDIV_A]),
-	CLKDEV_ICK_ID("divb", "sh_fsi2",	&fsidivs[FSIDIV_B]),
-	CLKDEV_ICK_ID("xcka", "sh_fsi2",	&fsiack_clk),
-	CLKDEV_ICK_ID("xckb", "sh_fsi2",	&fsibck_clk),
-};
-
-void __init r8a7740_clock_init(u8 md_ck)
-{
-	int k, ret = 0;
-
-	/* detect system clock parent */
-	if (md_ck & MD_CK1)
-		system_clk.parent = &extal1_div2_clk;
-	else
-		system_clk.parent = &extal1_clk;
-
-	/* detect RCLK parent */
-	switch (md_ck & (MD_CK2 | MD_CK1)) {
-	case MD_CK2 | MD_CK1:
-		r_clk.parent = &extal1_div2048_clk;
-		break;
-	case MD_CK2:
-		r_clk.parent = &extal1_div1024_clk;
-		break;
-	case MD_CK1:
-	default:
-		r_clk.parent = &extalr_clk;
-		break;
-	}
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	if (!ret)
-		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
-	if (!ret)
-		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
-	if (!ret)
-		ret = sh_clk_div6_reparent_register(div6_reparent_clks,
-						    DIV6_REPARENT_NR);
-
-	if (!ret)
-		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
-		ret = clk_register(late_main_clks[k]);
-
-	if (!ret)
-		ret = sh_clk_fsidiv_register(fsidivs, FSIDIV_REPARENT_NR);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup r8a7740 clocks\n");
-}
diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c
deleted file mode 100644
index 34608fcf0648..000000000000
--- a/arch/arm/mach-shmobile/pm-r8a7740.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * r8a7740 power management support
- *
- * Copyright (C) 2012  Renesas Solutions Corp.
- * Copyright (C) 2012  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/console.h>
-#include <linux/io.h>
-#include <linux/suspend.h>
-
-#include "common.h"
-#include "pm-rmobile.h"
-
-#define SYSC_BASE	IOMEM(0xe6180000)
-
-#if defined(CONFIG_PM) && !defined(CONFIG_ARCH_MULTIPLATFORM)
-static int r8a7740_pd_a3sm_suspend(void)
-{
-	/*
-	 * The A3SM domain contains the CPU core and therefore it should
-	 * only be turned off if the CPU is not in use.
-	 */
-	return -EBUSY;
-}
-
-static int r8a7740_pd_a3sp_suspend(void)
-{
-	/*
-	 * Serial consoles make use of SCIF hardware located in A3SP,
-	 * keep such power domain on if "no_console_suspend" is set.
-	 */
-	return console_suspend_enabled ? 0 : -EBUSY;
-}
-
-static int r8a7740_pd_d4_suspend(void)
-{
-	/*
-	 * The D4 domain contains the Coresight-ETM hardware block and
-	 * therefore it should only be turned off if the debug module is
-	 * not in use.
-	 */
-	return -EBUSY;
-}
-
-static struct rmobile_pm_domain r8a7740_pm_domains[] = {
-	{
-		.genpd.name	= "A4LC",
-		.base		= SYSC_BASE,
-		.bit_shift	= 1,
-	}, {
-		.genpd.name	= "A4MP",
-		.base		= SYSC_BASE,
-		.bit_shift	= 2,
-	}, {
-		.genpd.name	= "D4",
-		.base		= SYSC_BASE,
-		.bit_shift	= 3,
-		.gov		= &pm_domain_always_on_gov,
-		.suspend	= r8a7740_pd_d4_suspend,
-	}, {
-		.genpd.name	= "A4R",
-		.base		= SYSC_BASE,
-		.bit_shift	= 5,
-	}, {
-		.genpd.name	= "A3RV",
-		.base		= SYSC_BASE,
-		.bit_shift	= 6,
-	}, {
-		.genpd.name	= "A4S",
-		.base		= SYSC_BASE,
-		.bit_shift	= 10,
-		.no_debug	= true,
-	}, {
-		.genpd.name	= "A3SP",
-		.base		= SYSC_BASE,
-		.bit_shift	= 11,
-		.gov		= &pm_domain_always_on_gov,
-		.no_debug	= true,
-		.suspend	= r8a7740_pd_a3sp_suspend,
-	}, {
-		.genpd.name	= "A3SM",
-		.base		= SYSC_BASE,
-		.bit_shift	= 12,
-		.gov		= &pm_domain_always_on_gov,
-		.suspend	= r8a7740_pd_a3sm_suspend,
-	}, {
-		.genpd.name	= "A3SG",
-		.base		= SYSC_BASE,
-		.bit_shift	= 13,
-	}, {
-		.genpd.name	= "A4SU",
-		.base		= SYSC_BASE,
-		.bit_shift	= 20,
-	},
-};
-
-void __init r8a7740_init_pm_domains(void)
-{
-	rmobile_init_domains(r8a7740_pm_domains, ARRAY_SIZE(r8a7740_pm_domains));
-	pm_genpd_add_subdomain_names("A4R", "A3RV");
-	pm_genpd_add_subdomain_names("A4S", "A3SP");
-	pm_genpd_add_subdomain_names("A4S", "A3SM");
-	pm_genpd_add_subdomain_names("A4S", "A3SG");
-}
-#endif /* CONFIG_PM && !CONFIG_ARCH_MULTIPLATFORM */
-
-#ifdef CONFIG_SUSPEND
-static int r8a7740_enter_suspend(suspend_state_t suspend_state)
-{
-	cpu_do_idle();
-	return 0;
-}
-
-static void r8a7740_suspend_init(void)
-{
-	shmobile_suspend_ops.enter = r8a7740_enter_suspend;
-}
-#else
-static void r8a7740_suspend_init(void) {}
-#endif
-
-void __init r8a7740_pm_init(void)
-{
-	r8a7740_suspend_init();
-}
diff --git a/arch/arm/mach-shmobile/r8a7740.h b/arch/arm/mach-shmobile/r8a7740.h
deleted file mode 100644
index ca7805ad7ea3..000000000000
--- a/arch/arm/mach-shmobile/r8a7740.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_R8A7740_H__
-#define __ASM_R8A7740_H__
-
-/*
- * MD_CKx pin
- */
-#define MD_CK2	(1 << 2)
-#define MD_CK1	(1 << 1)
-#define MD_CK0	(1 << 0)
-
-/* DMA slave IDs */
-enum {
-	SHDMA_SLAVE_INVALID,
-	SHDMA_SLAVE_SDHI0_RX,
-	SHDMA_SLAVE_SDHI0_TX,
-	SHDMA_SLAVE_SDHI1_RX,
-	SHDMA_SLAVE_SDHI1_TX,
-	SHDMA_SLAVE_SDHI2_RX,
-	SHDMA_SLAVE_SDHI2_TX,
-	SHDMA_SLAVE_FSIA_RX,
-	SHDMA_SLAVE_FSIA_TX,
-	SHDMA_SLAVE_FSIB_TX,
-	SHDMA_SLAVE_USBHS_TX,
-	SHDMA_SLAVE_USBHS_RX,
-	SHDMA_SLAVE_MMCIF_TX,
-	SHDMA_SLAVE_MMCIF_RX,
-};
-
-extern void r8a7740_meram_workaround(void);
-extern void r8a7740_init_irq_of(void);
-extern void r8a7740_map_io(void);
-extern void r8a7740_add_early_devices(void);
-extern void r8a7740_add_standard_devices(void);
-extern void r8a7740_clock_init(u8 md_ck);
-extern void r8a7740_pinmux_init(void);
-extern void r8a7740_pm_init(void);
-
-#if defined(CONFIG_PM) && !defined(CONFIG_ARCH_MULTIPLATFORM)
-extern void __init r8a7740_init_pm_domains(void);
-#else
-static inline void r8a7740_init_pm_domains(void) {}
-#endif /* CONFIG_PM && !CONFIG_ARCH_MULTIPLATFORM */
-
-#endif /* __ASM_R8A7740_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 00291cc1772d..a158b0bf7762 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -13,31 +13,19 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
-#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/irqchip.h>
 #include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/irq-renesas-intc-irqpin.h>
-#include <linux/platform_device.h>
 #include <linux/of_platform.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
-#include <linux/platform_data/sh_ipmmu.h>
 
-#include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/hardware/cache-l2x0.h>
 
 #include "common.h"
-#include "dma-register.h"
-#include "irqs.h"
-#include "pm-rmobile.h"
-#include "r8a7740.h"
 
 static struct map_desc r8a7740_io_desc[] __initdata = {
 	 /*
@@ -64,613 +52,12 @@ static struct map_desc r8a7740_io_desc[] __initdata = {
 #endif
 };
 
-void __init r8a7740_map_io(void)
+static void __init r8a7740_map_io(void)
 {
 	debug_ll_io_init();
 	iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc));
 }
 
-/* PFC */
-static const struct resource pfc_resources[] = {
-	DEFINE_RES_MEM(0xe6050000, 0x8000),
-	DEFINE_RES_MEM(0xe605800c, 0x0020),
-};
-
-void __init r8a7740_pinmux_init(void)
-{
-	platform_device_register_simple("pfc-r8a7740", -1, pfc_resources,
-					ARRAY_SIZE(pfc_resources));
-}
-
-static struct renesas_intc_irqpin_config irqpin0_platform_data = {
-	.irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */
-};
-
-static struct resource irqpin0_resources[] = {
-	DEFINE_RES_MEM(0xe6900000, 4), /* ICR1A */
-	DEFINE_RES_MEM(0xe6900010, 4), /* INTPRI00A */
-	DEFINE_RES_MEM(0xe6900020, 1), /* INTREQ00A */
-	DEFINE_RES_MEM(0xe6900040, 1), /* INTMSK00A */
-	DEFINE_RES_MEM(0xe6900060, 1), /* INTMSKCLR00A */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ0 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ1 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ2 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ3 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ4 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ5 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ6 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ7 */
-};
-
-static struct platform_device irqpin0_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 0,
-	.resource	= irqpin0_resources,
-	.num_resources	= ARRAY_SIZE(irqpin0_resources),
-	.dev		= {
-		.platform_data  = &irqpin0_platform_data,
-	},
-};
-
-static struct renesas_intc_irqpin_config irqpin1_platform_data = {
-	.irq_base = irq_pin(8), /* IRQ8 -> IRQ15 */
-};
-
-static struct resource irqpin1_resources[] = {
-	DEFINE_RES_MEM(0xe6900004, 4), /* ICR2A */
-	DEFINE_RES_MEM(0xe6900014, 4), /* INTPRI10A */
-	DEFINE_RES_MEM(0xe6900024, 1), /* INTREQ10A */
-	DEFINE_RES_MEM(0xe6900044, 1), /* INTMSK10A */
-	DEFINE_RES_MEM(0xe6900064, 1), /* INTMSKCLR10A */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ8 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ9 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ10 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ11 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ12 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ13 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ14 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ15 */
-};
-
-static struct platform_device irqpin1_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 1,
-	.resource	= irqpin1_resources,
-	.num_resources	= ARRAY_SIZE(irqpin1_resources),
-	.dev		= {
-		.platform_data  = &irqpin1_platform_data,
-	},
-};
-
-static struct renesas_intc_irqpin_config irqpin2_platform_data = {
-	.irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */
-};
-
-static struct resource irqpin2_resources[] = {
-	DEFINE_RES_MEM(0xe6900008, 4), /* ICR3A */
-	DEFINE_RES_MEM(0xe6900018, 4), /* INTPRI30A */
-	DEFINE_RES_MEM(0xe6900028, 1), /* INTREQ30A */
-	DEFINE_RES_MEM(0xe6900048, 1), /* INTMSK30A */
-	DEFINE_RES_MEM(0xe6900068, 1), /* INTMSKCLR30A */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ16 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ17 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ18 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ19 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ20 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ21 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ22 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ23 */
-};
-
-static struct platform_device irqpin2_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 2,
-	.resource	= irqpin2_resources,
-	.num_resources	= ARRAY_SIZE(irqpin2_resources),
-	.dev		= {
-		.platform_data  = &irqpin2_platform_data,
-	},
-};
-
-static struct renesas_intc_irqpin_config irqpin3_platform_data = {
-	.irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */
-};
-
-static struct resource irqpin3_resources[] = {
-	DEFINE_RES_MEM(0xe690000c, 4), /* ICR3A */
-	DEFINE_RES_MEM(0xe690001c, 4), /* INTPRI30A */
-	DEFINE_RES_MEM(0xe690002c, 1), /* INTREQ30A */
-	DEFINE_RES_MEM(0xe690004c, 1), /* INTMSK30A */
-	DEFINE_RES_MEM(0xe690006c, 1), /* INTMSKCLR30A */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ24 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ25 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ26 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ27 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ28 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ29 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ30 */
-	DEFINE_RES_IRQ(gic_spi(149)), /* IRQ31 */
-};
-
-static struct platform_device irqpin3_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 3,
-	.resource	= irqpin3_resources,
-	.num_resources	= ARRAY_SIZE(irqpin3_resources),
-	.dev		= {
-		.platform_data  = &irqpin3_platform_data,
-	},
-};
-
-/* SCIF */
-#define R8A7740_SCIF(scif_type, index, baseaddr, irq)		\
-static struct plat_sci_port scif##index##_platform_data = {	\
-	.type		= scif_type,				\
-	.flags		= UPF_BOOT_AUTOCONF,			\
-	.scscr		= SCSCR_RE | SCSCR_TE,			\
-};								\
-								\
-static struct resource scif##index##_resources[] = {		\
-	DEFINE_RES_MEM(baseaddr, 0x100),			\
-	DEFINE_RES_IRQ(irq),					\
-};								\
-								\
-static struct platform_device scif##index##_device = {		\
-	.name		= "sh-sci",				\
-	.id		= index,				\
-	.resource	= scif##index##_resources,		\
-	.num_resources	= ARRAY_SIZE(scif##index##_resources),	\
-	.dev		= {					\
-		.platform_data	= &scif##index##_platform_data,	\
-	},							\
-}
-
-R8A7740_SCIF(PORT_SCIFA, 0, 0xe6c40000, gic_spi(100));
-R8A7740_SCIF(PORT_SCIFA, 1, 0xe6c50000, gic_spi(101));
-R8A7740_SCIF(PORT_SCIFA, 2, 0xe6c60000, gic_spi(102));
-R8A7740_SCIF(PORT_SCIFA, 3, 0xe6c70000, gic_spi(103));
-R8A7740_SCIF(PORT_SCIFA, 4, 0xe6c80000, gic_spi(104));
-R8A7740_SCIF(PORT_SCIFA, 5, 0xe6cb0000, gic_spi(105));
-R8A7740_SCIF(PORT_SCIFA, 6, 0xe6cc0000, gic_spi(106));
-R8A7740_SCIF(PORT_SCIFA, 7, 0xe6cd0000, gic_spi(107));
-R8A7740_SCIF(PORT_SCIFB, 8, 0xe6c30000, gic_spi(108));
-
-/* CMT */
-static struct sh_timer_config cmt1_platform_data = {
-	.channels_mask = 0x3f,
-};
-
-static struct resource cmt1_resources[] = {
-	DEFINE_RES_MEM(0xe6138000, 0x170),
-	DEFINE_RES_IRQ(gic_spi(58)),
-};
-
-static struct platform_device cmt1_device = {
-	.name		= "sh-cmt-48",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &cmt1_platform_data,
-	},
-	.resource	= cmt1_resources,
-	.num_resources	= ARRAY_SIZE(cmt1_resources),
-};
-
-/* TMU */
-static struct sh_timer_config tmu0_platform_data = {
-	.channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
-	DEFINE_RES_MEM(0xfff80000, 0x2c),
-	DEFINE_RES_IRQ(gic_spi(198)),
-	DEFINE_RES_IRQ(gic_spi(199)),
-	DEFINE_RES_IRQ(gic_spi(200)),
-};
-
-static struct platform_device tmu0_device = {
-	.name		= "sh-tmu",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &tmu0_platform_data,
-	},
-	.resource	= tmu0_resources,
-	.num_resources	= ARRAY_SIZE(tmu0_resources),
-};
-
-/* IPMMUI (an IPMMU module for ICB/LMB) */
-static struct resource ipmmu_resources[] = {
-	[0] = {
-		.name	= "IPMMUI",
-		.start	= 0xfe951000,
-		.end	= 0xfe9510ff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static const char * const ipmmu_dev_names[] = {
-	"sh_mobile_lcdc_fb.0",
-	"sh_mobile_lcdc_fb.1",
-	"sh_mobile_ceu.0",
-};
-
-static struct shmobile_ipmmu_platform_data ipmmu_platform_data = {
-	.dev_names = ipmmu_dev_names,
-	.num_dev_names = ARRAY_SIZE(ipmmu_dev_names),
-};
-
-static struct platform_device ipmmu_device = {
-	.name           = "ipmmu",
-	.id             = -1,
-	.dev = {
-		.platform_data = &ipmmu_platform_data,
-	},
-	.resource       = ipmmu_resources,
-	.num_resources  = ARRAY_SIZE(ipmmu_resources),
-};
-
-static struct platform_device *r8a7740_early_devices[] __initdata = {
-	&scif0_device,
-	&scif1_device,
-	&scif2_device,
-	&scif3_device,
-	&scif4_device,
-	&scif5_device,
-	&scif6_device,
-	&scif7_device,
-	&scif8_device,
-	&irqpin0_device,
-	&irqpin1_device,
-	&irqpin2_device,
-	&irqpin3_device,
-	&tmu0_device,
-	&ipmmu_device,
-	&cmt1_device,
-};
-
-/* DMA */
-static const struct sh_dmae_slave_config r8a7740_dmae_slaves[] = {
-	{
-		.slave_id	= SHDMA_SLAVE_SDHI0_TX,
-		.addr		= 0xe6850030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc1,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI0_RX,
-		.addr		= 0xe6850030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc2,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI1_TX,
-		.addr		= 0xe6860030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc9,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI1_RX,
-		.addr		= 0xe6860030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xca,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI2_TX,
-		.addr		= 0xe6870030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xcd,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI2_RX,
-		.addr		= 0xe6870030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xce,
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSIA_TX,
-		.addr		= 0xfe1f0024,
-		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xb1,
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSIA_RX,
-		.addr		= 0xfe1f0020,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xb2,
-	}, {
-		.slave_id	= SHDMA_SLAVE_FSIB_TX,
-		.addr		= 0xfe1f0064,
-		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xb5,
-	}, {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-		.addr		= 0xe6bd0034,
-		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd1,
-	}, {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-		.addr		= 0xe6bd0034,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd2,
-	},
-};
-
-#define DMA_CHANNEL(a, b, c)			\
-{						\
-	.offset		= a,			\
-	.dmars		= b,			\
-	.dmars_bit	= c,			\
-	.chclr_offset	= (0x220 - 0x20) + a	\
-}
-
-static const struct sh_dmae_channel r8a7740_dmae_channels[] = {
-	DMA_CHANNEL(0x00, 0, 0),
-	DMA_CHANNEL(0x10, 0, 8),
-	DMA_CHANNEL(0x20, 4, 0),
-	DMA_CHANNEL(0x30, 4, 8),
-	DMA_CHANNEL(0x50, 8, 0),
-	DMA_CHANNEL(0x60, 8, 8),
-};
-
-static struct sh_dmae_pdata dma_platform_data = {
-	.slave		= r8a7740_dmae_slaves,
-	.slave_num	= ARRAY_SIZE(r8a7740_dmae_slaves),
-	.channel	= r8a7740_dmae_channels,
-	.channel_num	= ARRAY_SIZE(r8a7740_dmae_channels),
-	.ts_low_shift	= TS_LOW_SHIFT,
-	.ts_low_mask	= TS_LOW_BIT << TS_LOW_SHIFT,
-	.ts_high_shift	= TS_HI_SHIFT,
-	.ts_high_mask	= TS_HI_BIT << TS_HI_SHIFT,
-	.ts_shift	= dma_ts_shift,
-	.ts_shift_num	= ARRAY_SIZE(dma_ts_shift),
-	.dmaor_init	= DMAOR_DME,
-	.chclr_present	= 1,
-};
-
-/* Resource order important! */
-static struct resource r8a7740_dmae0_resources[] = {
-	{
-		/* Channel registers and DMAOR */
-		.start	= 0xfe008020,
-		.end	= 0xfe00828f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* DMARSx */
-		.start	= 0xfe009000,
-		.end	= 0xfe00900b,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "error_irq",
-		.start	= gic_spi(34),
-		.end	= gic_spi(34),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		/* IRQ for channels 0-5 */
-		.start	= gic_spi(28),
-		.end	= gic_spi(33),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-/* Resource order important! */
-static struct resource r8a7740_dmae1_resources[] = {
-	{
-		/* Channel registers and DMAOR */
-		.start	= 0xfe018020,
-		.end	= 0xfe01828f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* DMARSx */
-		.start	= 0xfe019000,
-		.end	= 0xfe01900b,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "error_irq",
-		.start	= gic_spi(41),
-		.end	= gic_spi(41),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		/* IRQ for channels 0-5 */
-		.start	= gic_spi(35),
-		.end	= gic_spi(40),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-/* Resource order important! */
-static struct resource r8a7740_dmae2_resources[] = {
-	{
-		/* Channel registers and DMAOR */
-		.start	= 0xfe028020,
-		.end	= 0xfe02828f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* DMARSx */
-		.start	= 0xfe029000,
-		.end	= 0xfe02900b,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "error_irq",
-		.start	= gic_spi(48),
-		.end	= gic_spi(48),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		/* IRQ for channels 0-5 */
-		.start	= gic_spi(42),
-		.end	= gic_spi(47),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dma0_device = {
-	.name		= "sh-dma-engine",
-	.id		= 0,
-	.resource	= r8a7740_dmae0_resources,
-	.num_resources	= ARRAY_SIZE(r8a7740_dmae0_resources),
-	.dev		= {
-		.platform_data	= &dma_platform_data,
-	},
-};
-
-static struct platform_device dma1_device = {
-	.name		= "sh-dma-engine",
-	.id		= 1,
-	.resource	= r8a7740_dmae1_resources,
-	.num_resources	= ARRAY_SIZE(r8a7740_dmae1_resources),
-	.dev		= {
-		.platform_data	= &dma_platform_data,
-	},
-};
-
-static struct platform_device dma2_device = {
-	.name		= "sh-dma-engine",
-	.id		= 2,
-	.resource	= r8a7740_dmae2_resources,
-	.num_resources	= ARRAY_SIZE(r8a7740_dmae2_resources),
-	.dev		= {
-		.platform_data	= &dma_platform_data,
-	},
-};
-
-/* USB-DMAC */
-static const struct sh_dmae_channel r8a7740_usb_dma_channels[] = {
-	{
-		.offset = 0,
-	}, {
-		.offset = 0x20,
-	},
-};
-
-static const struct sh_dmae_slave_config r8a7740_usb_dma_slaves[] = {
-	{
-		.slave_id	= SHDMA_SLAVE_USBHS_TX,
-		.chcr		= USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE),
-	}, {
-		.slave_id	= SHDMA_SLAVE_USBHS_RX,
-		.chcr		= USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE),
-	},
-};
-
-static struct sh_dmae_pdata usb_dma_platform_data = {
-	.slave		= r8a7740_usb_dma_slaves,
-	.slave_num	= ARRAY_SIZE(r8a7740_usb_dma_slaves),
-	.channel	= r8a7740_usb_dma_channels,
-	.channel_num	= ARRAY_SIZE(r8a7740_usb_dma_channels),
-	.ts_low_shift	= USBTS_LOW_SHIFT,
-	.ts_low_mask	= USBTS_LOW_BIT << USBTS_LOW_SHIFT,
-	.ts_high_shift	= USBTS_HI_SHIFT,
-	.ts_high_mask	= USBTS_HI_BIT << USBTS_HI_SHIFT,
-	.ts_shift	= dma_usbts_shift,
-	.ts_shift_num	= ARRAY_SIZE(dma_usbts_shift),
-	.dmaor_init	= DMAOR_DME,
-	.chcr_offset	= 0x14,
-	.chcr_ie_bit	= 1 << 5,
-	.dmaor_is_32bit	= 1,
-	.needs_tend_set	= 1,
-	.no_dmars	= 1,
-	.slave_only	= 1,
-};
-
-static struct resource r8a7740_usb_dma_resources[] = {
-	{
-		/* Channel registers and DMAOR */
-		.start	= 0xe68a0020,
-		.end	= 0xe68a0064 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* VCR/SWR/DMICR */
-		.start	= 0xe68a0000,
-		.end	= 0xe68a0014 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* IRQ for channels */
-		.start	= gic_spi(49),
-		.end	= gic_spi(49),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb_dma_device = {
-	.name		= "sh-dma-engine",
-	.id		= 3,
-	.resource	= r8a7740_usb_dma_resources,
-	.num_resources	= ARRAY_SIZE(r8a7740_usb_dma_resources),
-	.dev		= {
-		.platform_data	= &usb_dma_platform_data,
-	},
-};
-
-/* I2C */
-static struct resource i2c0_resources[] = {
-	[0] = {
-		.name	= "IIC0",
-		.start	= 0xfff20000,
-		.end	= 0xfff20425 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(201),
-		.end	= gic_spi(204),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c1_resources[] = {
-	[0] = {
-		.name	= "IIC1",
-		.start	= 0xe6c20000,
-		.end	= 0xe6c20425 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(70), /* IIC1_ALI1 */
-		.end    = gic_spi(73), /* IIC1_DTEI1 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c0_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 0,
-	.resource	= i2c0_resources,
-	.num_resources	= ARRAY_SIZE(i2c0_resources),
-};
-
-static struct platform_device i2c1_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 1,
-	.resource	= i2c1_resources,
-	.num_resources	= ARRAY_SIZE(i2c1_resources),
-};
-
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start	= gic_spi(83),
-		.end	= gic_spi(83),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.name	= "armv7-pmu",
-	.id	= -1,
-	.num_resources = ARRAY_SIZE(pmu_resources),
-	.resource = pmu_resources,
-};
-
-static struct platform_device *r8a7740_late_devices[] __initdata = {
-	&i2c0_device,
-	&i2c1_device,
-	&dma0_device,
-	&dma1_device,
-	&dma2_device,
-	&usb_dma_device,
-	&pmu_device,
-};
-
 /*
  * r8a7740 chip has lasting errata on MERAM buffer.
  * this is work-around for it.
@@ -678,7 +65,7 @@ static struct platform_device *r8a7740_late_devices[] __initdata = {
  *	"Media RAM (MERAM)" on r8a7740 documentation
  */
 #define MEBUFCNTR	0xFE950098
-void __init r8a7740_meram_workaround(void)
+static void __init r8a7740_meram_workaround(void)
 {
 	void __iomem *reg;
 
@@ -689,70 +76,13 @@ void __init r8a7740_meram_workaround(void)
 	}
 }
 
-void __init r8a7740_add_standard_devices(void)
-{
-	static struct pm_domain_device domain_devices[] __initdata = {
-		{ "A4R",  &tmu0_device },
-		{ "A4R",  &i2c0_device },
-		{ "A4S",  &irqpin0_device },
-		{ "A4S",  &irqpin1_device },
-		{ "A4S",  &irqpin2_device },
-		{ "A4S",  &irqpin3_device },
-		{ "A3SP", &scif0_device },
-		{ "A3SP", &scif1_device },
-		{ "A3SP", &scif2_device },
-		{ "A3SP", &scif3_device },
-		{ "A3SP", &scif4_device },
-		{ "A3SP", &scif5_device },
-		{ "A3SP", &scif6_device },
-		{ "A3SP", &scif7_device },
-		{ "A3SP", &scif8_device },
-		{ "A3SP", &i2c1_device },
-		{ "A3SP", &ipmmu_device },
-		{ "A3SP", &dma0_device },
-		{ "A3SP", &dma1_device },
-		{ "A3SP", &dma2_device },
-		{ "A3SP", &usb_dma_device },
-	};
-
-	r8a7740_init_pm_domains();
-
-	/* add devices */
-	platform_add_devices(r8a7740_early_devices,
-			    ARRAY_SIZE(r8a7740_early_devices));
-	platform_add_devices(r8a7740_late_devices,
-			     ARRAY_SIZE(r8a7740_late_devices));
-
-	/* add devices to PM domain  */
-	rmobile_add_devices_to_domains(domain_devices,
-				       ARRAY_SIZE(domain_devices));
-}
-
-void __init r8a7740_add_early_devices(void)
-{
-	early_platform_add_devices(r8a7740_early_devices,
-				   ARRAY_SIZE(r8a7740_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
-}
-
-#ifdef CONFIG_USE_OF
-
-void __init r8a7740_init_irq_of(void)
+static void __init r8a7740_init_irq_of(void)
 {
 	void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
 	void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10);
 	void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4);
 
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
-	void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000);
-	void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000);
-
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-#else
 	irqchip_init();
-#endif
 
 	/* route signals to GIC */
 	iowrite32(0x0, pfc_inta_ctrl);
@@ -800,5 +130,3 @@ DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
 	.init_late	= shmobile_init_late,
 	.dt_compat	= r8a7740_boards_compat_dt,
 MACHINE_END
-
-#endif /* CONFIG_USE_OF */
-- 
2.1.4

[PATCH 12/16] ARM: shmobile: Remove unused dma-register.h

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last users of "dma-register.h" were the sh73a0 and r8a7740 legacy
SoC code, which have been removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/dma-register.h | 84 -----------------------------------
 1 file changed, 84 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/dma-register.h

diff --git a/arch/arm/mach-shmobile/dma-register.h b/arch/arm/mach-shmobile/dma-register.h
deleted file mode 100644
index 52a2f66e600f..000000000000
--- a/arch/arm/mach-shmobile/dma-register.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * SH-ARM CPU-specific DMA definitions, used by both DMA drivers
- *
- * Copyright (C) 2012 Renesas Solutions Corp
- *
- * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * Based on arch/sh/include/cpu-sh4/cpu/dma-register.h
- * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef DMA_REGISTER_H
-#define DMA_REGISTER_H
-
-/*
- *		Direct Memory Access Controller
- */
-
-/* Transmit sizes and respective CHCR register values */
-enum {
-	XMIT_SZ_8BIT		= 0,
-	XMIT_SZ_16BIT		= 1,
-	XMIT_SZ_32BIT		= 2,
-	XMIT_SZ_64BIT		= 7,
-	XMIT_SZ_128BIT		= 3,
-	XMIT_SZ_256BIT		= 4,
-	XMIT_SZ_512BIT		= 5,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-static const unsigned int dma_ts_shift[] = {
-	[XMIT_SZ_8BIT]		= 0,
-	[XMIT_SZ_16BIT]		= 1,
-	[XMIT_SZ_32BIT]		= 2,
-	[XMIT_SZ_64BIT]		= 3,
-	[XMIT_SZ_128BIT]	= 4,
-	[XMIT_SZ_256BIT]	= 5,
-	[XMIT_SZ_512BIT]	= 6,
-};
-
-#define TS_LOW_BIT	0x3 /* --xx */
-#define TS_HI_BIT	0xc /* xx-- */
-
-#define TS_LOW_SHIFT	(3)
-#define TS_HI_SHIFT	(20 - 2)	/* 2 bits for shifted low TS */
-
-#define TS_INDEX2VAL(i) \
-	((((i) & TS_LOW_BIT) << TS_LOW_SHIFT) |\
-	 (((i) & TS_HI_BIT)  << TS_HI_SHIFT))
-
-#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL((xmit_sz)))
-#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL((xmit_sz)))
-
-
-/*
- *		USB High-Speed DMAC
- */
-/* Transmit sizes and respective CHCR register values */
-enum {
-	USBTS_XMIT_SZ_8BYTE		= 0,
-	USBTS_XMIT_SZ_16BYTE		= 1,
-	USBTS_XMIT_SZ_32BYTE		= 2,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-static const unsigned int dma_usbts_shift[] = {
-	[USBTS_XMIT_SZ_8BYTE]	= 3,
-	[USBTS_XMIT_SZ_16BYTE]	= 4,
-	[USBTS_XMIT_SZ_32BYTE]	= 5,
-};
-
-#define USBTS_LOW_BIT	0x3 /* --xx */
-#define USBTS_HI_BIT	0x0 /* ---- */
-
-#define USBTS_LOW_SHIFT	6
-#define USBTS_HI_SHIFT	0
-
-#define USBTS_INDEX2VAL(i) (((i) & 3) << 6)
-
-#endif /* DMA_REGISTER_H */
-- 
2.1.4

[PATCH 12/16] ARM: shmobile: Remove unused dma-register.h

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last users of "dma-register.h" were the sh73a0 and r8a7740 legacy
SoC code, which have been removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/dma-register.h | 84 -----------------------------------
 1 file changed, 84 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/dma-register.h

diff --git a/arch/arm/mach-shmobile/dma-register.h b/arch/arm/mach-shmobile/dma-register.h
deleted file mode 100644
index 52a2f66e600f..000000000000
--- a/arch/arm/mach-shmobile/dma-register.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * SH-ARM CPU-specific DMA definitions, used by both DMA drivers
- *
- * Copyright (C) 2012 Renesas Solutions Corp
- *
- * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * Based on arch/sh/include/cpu-sh4/cpu/dma-register.h
- * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef DMA_REGISTER_H
-#define DMA_REGISTER_H
-
-/*
- *		Direct Memory Access Controller
- */
-
-/* Transmit sizes and respective CHCR register values */
-enum {
-	XMIT_SZ_8BIT		= 0,
-	XMIT_SZ_16BIT		= 1,
-	XMIT_SZ_32BIT		= 2,
-	XMIT_SZ_64BIT		= 7,
-	XMIT_SZ_128BIT		= 3,
-	XMIT_SZ_256BIT		= 4,
-	XMIT_SZ_512BIT		= 5,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-static const unsigned int dma_ts_shift[] = {
-	[XMIT_SZ_8BIT]		= 0,
-	[XMIT_SZ_16BIT]		= 1,
-	[XMIT_SZ_32BIT]		= 2,
-	[XMIT_SZ_64BIT]		= 3,
-	[XMIT_SZ_128BIT]	= 4,
-	[XMIT_SZ_256BIT]	= 5,
-	[XMIT_SZ_512BIT]	= 6,
-};
-
-#define TS_LOW_BIT	0x3 /* --xx */
-#define TS_HI_BIT	0xc /* xx-- */
-
-#define TS_LOW_SHIFT	(3)
-#define TS_HI_SHIFT	(20 - 2)	/* 2 bits for shifted low TS */
-
-#define TS_INDEX2VAL(i) \
-	((((i) & TS_LOW_BIT) << TS_LOW_SHIFT) |\
-	 (((i) & TS_HI_BIT)  << TS_HI_SHIFT))
-
-#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL((xmit_sz)))
-#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL((xmit_sz)))
-
-
-/*
- *		USB High-Speed DMAC
- */
-/* Transmit sizes and respective CHCR register values */
-enum {
-	USBTS_XMIT_SZ_8BYTE		= 0,
-	USBTS_XMIT_SZ_16BYTE		= 1,
-	USBTS_XMIT_SZ_32BYTE		= 2,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-static const unsigned int dma_usbts_shift[] = {
-	[USBTS_XMIT_SZ_8BYTE]	= 3,
-	[USBTS_XMIT_SZ_16BYTE]	= 4,
-	[USBTS_XMIT_SZ_32BYTE]	= 5,
-};
-
-#define USBTS_LOW_BIT	0x3 /* --xx */
-#define USBTS_HI_BIT	0x0 /* ---- */
-
-#define USBTS_LOW_SHIFT	6
-#define USBTS_HI_SHIFT	0
-
-#define USBTS_INDEX2VAL(i) (((i) & 3) << 6)
-
-#endif /* DMA_REGISTER_H */
-- 
2.1.4

[PATCH 13/16] ARM: shmobile: R-Mobile: Remove legacy PM Domain code

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last user of the legacy R-Mobile PM Domain code was the r8a7740
legacy SoC code, which has been removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/pm-rmobile.c | 39 -------------------------------------
 arch/arm/mach-shmobile/pm-rmobile.h | 24 -----------------------
 2 files changed, 63 deletions(-)

diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
index b9b494f5ca99..a5b96b990aea 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -169,43 +169,6 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
 	__rmobile_pd_power_up(rmobile_pd, false);
 }
 
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
-
-void rmobile_init_domains(struct rmobile_pm_domain domains[], int num)
-{
-	int j;
-
-	for (j = 0; j < num; j++)
-		rmobile_init_pm_domain(&domains[j]);
-}
-
-void rmobile_add_device_to_domain_td(const char *domain_name,
-				     struct platform_device *pdev,
-				     struct gpd_timing_data *td)
-{
-	struct device *dev = &pdev->dev;
-
-	__pm_genpd_name_add_device(domain_name, dev, td);
-}
-
-void rmobile_add_devices_to_domains(struct pm_domain_device data[],
-				    int size)
-{
-	struct gpd_timing_data latencies = {
-		.stop_latency_ns = DEFAULT_DEV_LATENCY_NS,
-		.start_latency_ns = DEFAULT_DEV_LATENCY_NS,
-		.save_state_latency_ns = DEFAULT_DEV_LATENCY_NS,
-		.restore_state_latency_ns = DEFAULT_DEV_LATENCY_NS,
-	};
-	int j;
-
-	for (j = 0; j < size; j++)
-		rmobile_add_device_to_domain_td(data[j].domain_name,
-						data[j].pdev, &latencies);
-}
-
-#else /* !CONFIG_ARCH_SHMOBILE_LEGACY */
-
 static int rmobile_pd_suspend_busy(void)
 {
 	/*
@@ -436,5 +399,3 @@ static int __init rmobile_init_pm_domains(void)
 }
 
 core_initcall(rmobile_init_pm_domains);
-
-#endif /* !CONFIG_ARCH_SHMOBILE_LEGACY */
diff --git a/arch/arm/mach-shmobile/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h
index 3992b619c127..30a4a421ee31 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.h
+++ b/arch/arm/mach-shmobile/pm-rmobile.h
@@ -31,28 +31,4 @@ struct pm_domain_device {
 	struct platform_device *pdev;
 };
 
-#if defined(CONFIG_PM_RMOBILE) && defined(CONFIG_ARCH_SHMOBILE_LEGACY)
-extern void rmobile_init_domains(struct rmobile_pm_domain domains[], int num);
-extern void rmobile_add_device_to_domain_td(const char *domain_name,
-					    struct platform_device *pdev,
-					    struct gpd_timing_data *td);
-
-static inline void rmobile_add_device_to_domain(const char *domain_name,
-						struct platform_device *pdev)
-{
-	rmobile_add_device_to_domain_td(domain_name, pdev, NULL);
-}
-
-extern void rmobile_add_devices_to_domains(struct pm_domain_device data[],
-					   int size);
-#else
-
-#define rmobile_init_domains(domains, num) do { } while (0)
-#define rmobile_add_device_to_domain_td(name, pdev, td) do { } while (0)
-#define rmobile_add_device_to_domain(name, pdev) do { } while (0)
-
-static inline void rmobile_add_devices_to_domains(struct pm_domain_device d[],
-						  int size) {}
-#endif /* CONFIG_PM_RMOBILE */
-
 #endif /* PM_RMOBILE_H */
-- 
2.1.4

[PATCH 13/16] ARM: shmobile: R-Mobile: Remove legacy PM Domain code

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last user of the legacy R-Mobile PM Domain code was the r8a7740
legacy SoC code, which has been removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/pm-rmobile.c | 39 -------------------------------------
 arch/arm/mach-shmobile/pm-rmobile.h | 24 -----------------------
 2 files changed, 63 deletions(-)

diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
index b9b494f5ca99..a5b96b990aea 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -169,43 +169,6 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
 	__rmobile_pd_power_up(rmobile_pd, false);
 }
 
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
-
-void rmobile_init_domains(struct rmobile_pm_domain domains[], int num)
-{
-	int j;
-
-	for (j = 0; j < num; j++)
-		rmobile_init_pm_domain(&domains[j]);
-}
-
-void rmobile_add_device_to_domain_td(const char *domain_name,
-				     struct platform_device *pdev,
-				     struct gpd_timing_data *td)
-{
-	struct device *dev = &pdev->dev;
-
-	__pm_genpd_name_add_device(domain_name, dev, td);
-}
-
-void rmobile_add_devices_to_domains(struct pm_domain_device data[],
-				    int size)
-{
-	struct gpd_timing_data latencies = {
-		.stop_latency_ns = DEFAULT_DEV_LATENCY_NS,
-		.start_latency_ns = DEFAULT_DEV_LATENCY_NS,
-		.save_state_latency_ns = DEFAULT_DEV_LATENCY_NS,
-		.restore_state_latency_ns = DEFAULT_DEV_LATENCY_NS,
-	};
-	int j;
-
-	for (j = 0; j < size; j++)
-		rmobile_add_device_to_domain_td(data[j].domain_name,
-						data[j].pdev, &latencies);
-}
-
-#else /* !CONFIG_ARCH_SHMOBILE_LEGACY */
-
 static int rmobile_pd_suspend_busy(void)
 {
 	/*
@@ -436,5 +399,3 @@ static int __init rmobile_init_pm_domains(void)
 }
 
 core_initcall(rmobile_init_pm_domains);
-
-#endif /* !CONFIG_ARCH_SHMOBILE_LEGACY */
diff --git a/arch/arm/mach-shmobile/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h
index 3992b619c127..30a4a421ee31 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.h
+++ b/arch/arm/mach-shmobile/pm-rmobile.h
@@ -31,28 +31,4 @@ struct pm_domain_device {
 	struct platform_device *pdev;
 };
 
-#if defined(CONFIG_PM_RMOBILE) && defined(CONFIG_ARCH_SHMOBILE_LEGACY)
-extern void rmobile_init_domains(struct rmobile_pm_domain domains[], int num);
-extern void rmobile_add_device_to_domain_td(const char *domain_name,
-					    struct platform_device *pdev,
-					    struct gpd_timing_data *td);
-
-static inline void rmobile_add_device_to_domain(const char *domain_name,
-						struct platform_device *pdev)
-{
-	rmobile_add_device_to_domain_td(domain_name, pdev, NULL);
-}
-
-extern void rmobile_add_devices_to_domains(struct pm_domain_device data[],
-					   int size);
-#else
-
-#define rmobile_init_domains(domains, num) do { } while (0)
-#define rmobile_add_device_to_domain_td(name, pdev, td) do { } while (0)
-#define rmobile_add_device_to_domain(name, pdev) do { } while (0)
-
-static inline void rmobile_add_devices_to_domains(struct pm_domain_device d[],
-						  int size) {}
-#endif /* CONFIG_PM_RMOBILE */
-
 #endif /* PM_RMOBILE_H */
-- 
2.1.4

[PATCH 14/16] ARM: shmobile: Remove obsolete zboot support

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last user of the zboot code was the KZM-A9-GT legacy board code,
which has been removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/compressed/Makefile                  |   4 -
 arch/arm/boot/compressed/head-shmobile.S           |  71 --------------
 arch/arm/mach-shmobile/include/mach/zboot.h        |  14 ---
 arch/arm/mach-shmobile/include/mach/zboot_macros.h | 108 ---------------------
 4 files changed, 197 deletions(-)
 delete mode 100644 arch/arm/boot/compressed/head-shmobile.S
 delete mode 100644 arch/arm/mach-shmobile/include/mach/zboot.h
 delete mode 100644 arch/arm/mach-shmobile/include/mach/zboot_macros.h

diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 7a13aebacf81..3f9a9ebc77c3 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -51,10 +51,6 @@ else
 endif
 endif
 
-ifeq ($(CONFIG_ARCH_SHMOBILE_LEGACY),y)
-OBJS		+= head-shmobile.o
-endif
-
 #
 # We now have a PIC decompressor implementation.  Decompressors running
 # from RAM should not define ZTEXTADDR.  Decompressors running directly
diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S
deleted file mode 100644
index 22a75259faa3..000000000000
--- a/arch/arm/boot/compressed/head-shmobile.S
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * The head-file for SH-Mobile ARM platforms
- *
- * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Simon Horman <horms@verge.net.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifdef CONFIG_ZBOOT_ROM
-
-	.section	".start", "ax"
-
-	/* load board-specific initialization code */
-#include <mach/zboot.h>
-
-	adr	r0, dtb_info
-	ldmia	r0, {r1, r3, r4, r5, r7}
-
-	sub	r0, r0, r1		@ calculate the delta offset
-	add	r5, r5, r0		@ _edata
-
-	ldr	lr, [r5, #0]		@ check if valid DTB is present
-	cmp	lr, r3
-	bne	0f
-
-	add	r9, r7, #31		@ rounded up to a multiple
-	bic	r9, r9, #31		@ ... of 32 bytes
-
-	add	r6, r9, r5		@ copy from _edata
-	add	r9, r9, r4		@ to MEMORY_START
-
-1:	ldmdb	r6!, {r0 - r3, r10 - r12, lr}
-	cmp	r6, r5
-	stmdb	r9!, {r0 - r3, r10 - r12, lr}
-	bhi	1b
-
-	/* Success: Zero board ID, pointer to start of memory for atag/dtb */
-	mov	r7, #0
-	mov	r8, r4
-	b	2f
-
-	.align	2
-dtb_info:
-	.word	dtb_info
-#ifndef __ARMEB__
-	.word	0xedfe0dd0		@ sig is 0xd00dfeed big endian
-#else
-	.word	0xd00dfeed
-#endif
-	.word	MEMORY_START
-	.word	_edata
-	.word	0x4000			@ maximum DTB size
-0:
-	/* Failure: Zero board ID, NULL atag/dtb */
-	mov 	r7, #0
-	mov	r8, #0			@ pass null pointer as atag
-2 :
-
-#endif /* CONFIG_ZBOOT_ROM */
diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h
deleted file mode 100644
index 80f599f4b5ab..000000000000
--- a/arch/arm/mach-shmobile/include/mach/zboot.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef ZBOOT_H
-#define ZBOOT_H
-
-#include <mach/zboot_macros.h>
-
-/**************************************************
- *
- *		board specific settings
- *
- **************************************************/
-
-#error "unsupported board."
-
-#endif /* ZBOOT_H */
diff --git a/arch/arm/mach-shmobile/include/mach/zboot_macros.h b/arch/arm/mach-shmobile/include/mach/zboot_macros.h
deleted file mode 100644
index 14fd3d538e9a..000000000000
--- a/arch/arm/mach-shmobile/include/mach/zboot_macros.h
+++ /dev/null
@@ -1,108 +0,0 @@
-#ifndef __ZBOOT_MACRO_H
-#define __ZBOOT_MACRO_H
-
-/* The LIST command is used to include comments in the script */
-.macro	LIST comment
-.endm
-
-/* The ED command is used to write a 32-bit word */
-.macro ED, addr, data
-	LDR	r0, 1f
-	LDR	r1, 2f
-	STR	r1, [r0]
-	B	3f
-1 :	.long	\addr
-2 :	.long	\data
-3 :
-.endm
-
-/* The EW command is used to write a 16-bit word */
-.macro EW, addr, data
-	LDR	r0, 1f
-	LDR	r1, 2f
-	STRH	r1, [r0]
-	B	3f
-1 :	.long	\addr
-2 :	.long	\data
-3 :
-.endm
-
-/* The EB command is used to write an 8-bit word */
-.macro EB, addr, data
-	LDR	r0, 1f
-	LDR	r1, 2f
-	STRB	r1, [r0]
-	B	3f
-1 :	.long	\addr
-2 :	.long	\data
-3 :
-.endm
-
-/* The WAIT command is used to delay the execution */
-.macro  WAIT, time, reg
-	LDR	r1, 1f
-	LDR	r0, 2f
-	STR	r0, [r1]
-10 :
-	LDR	r0, [r1]
-	CMP	r0, #0x00000000
-	BNE	10b
-	NOP
-	B	3f
-1 :	.long	\reg
-2 :	.long	\time * 100
-3 :
-.endm
-
-/* The DD command is used to read a 32-bit word */
-.macro  DD, start, end
-	LDR	r1, 1f
-	B	2f
-1 :	.long	\start
-2 :
-.endm
-
-/* loop until a given value has been read (with mask) */
-.macro WAIT_MASK, addr, data, cmp
-	LDR	r0, 2f
-	LDR	r1, 3f
-	LDR	r2, 4f
-1:
-	LDR	r3, [r0, #0]
-	AND	r3, r1, r3
-	CMP	r2, r3
-	BNE	1b
-	B	5f
-2:	.long	\addr
-3:	.long	\data
-4:	.long	\cmp
-5:
-.endm
-
-/* read 32-bit value from addr, "or" an immediate and write back */
-.macro ED_OR, addr, data
-	LDR r4, 1f
-	LDR r5, 2f
-	LDR r6, [r4]
-	ORR r5, r6, r5
-	STR r5, [r4]
-	B	3f
-1:	.long	\addr
-2:	.long	\data
-3:
-.endm
-
-/* read 32-bit value from addr, "and" an immediate and write back */
-.macro ED_AND, addr, data
-	LDR r4, 1f
-	LDR r5, 2f
-	LDR r6, [r4]
-	AND r5, r6, r5
-	STR r5, [r4]
-	B	3f
-1:	.long \addr
-2:	.long \data
-3:
-.endm
-
-#endif /* __ZBOOT_MACRO_H */
-- 
2.1.4

[PATCH 14/16] ARM: shmobile: Remove obsolete zboot support

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last user of the zboot code was the KZM-A9-GT legacy board code,
which has been removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/compressed/Makefile                  |   4 -
 arch/arm/boot/compressed/head-shmobile.S           |  71 --------------
 arch/arm/mach-shmobile/include/mach/zboot.h        |  14 ---
 arch/arm/mach-shmobile/include/mach/zboot_macros.h | 108 ---------------------
 4 files changed, 197 deletions(-)
 delete mode 100644 arch/arm/boot/compressed/head-shmobile.S
 delete mode 100644 arch/arm/mach-shmobile/include/mach/zboot.h
 delete mode 100644 arch/arm/mach-shmobile/include/mach/zboot_macros.h

diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 7a13aebacf81..3f9a9ebc77c3 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -51,10 +51,6 @@ else
 endif
 endif
 
-ifeq ($(CONFIG_ARCH_SHMOBILE_LEGACY),y)
-OBJS		+= head-shmobile.o
-endif
-
 #
 # We now have a PIC decompressor implementation.  Decompressors running
 # from RAM should not define ZTEXTADDR.  Decompressors running directly
diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S
deleted file mode 100644
index 22a75259faa3..000000000000
--- a/arch/arm/boot/compressed/head-shmobile.S
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * The head-file for SH-Mobile ARM platforms
- *
- * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Simon Horman <horms@verge.net.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifdef CONFIG_ZBOOT_ROM
-
-	.section	".start", "ax"
-
-	/* load board-specific initialization code */
-#include <mach/zboot.h>
-
-	adr	r0, dtb_info
-	ldmia	r0, {r1, r3, r4, r5, r7}
-
-	sub	r0, r0, r1		@ calculate the delta offset
-	add	r5, r5, r0		@ _edata
-
-	ldr	lr, [r5, #0]		@ check if valid DTB is present
-	cmp	lr, r3
-	bne	0f
-
-	add	r9, r7, #31		@ rounded up to a multiple
-	bic	r9, r9, #31		@ ... of 32 bytes
-
-	add	r6, r9, r5		@ copy from _edata
-	add	r9, r9, r4		@ to MEMORY_START
-
-1:	ldmdb	r6!, {r0 - r3, r10 - r12, lr}
-	cmp	r6, r5
-	stmdb	r9!, {r0 - r3, r10 - r12, lr}
-	bhi	1b
-
-	/* Success: Zero board ID, pointer to start of memory for atag/dtb */
-	mov	r7, #0
-	mov	r8, r4
-	b	2f
-
-	.align	2
-dtb_info:
-	.word	dtb_info
-#ifndef __ARMEB__
-	.word	0xedfe0dd0		@ sig is 0xd00dfeed big endian
-#else
-	.word	0xd00dfeed
-#endif
-	.word	MEMORY_START
-	.word	_edata
-	.word	0x4000			@ maximum DTB size
-0:
-	/* Failure: Zero board ID, NULL atag/dtb */
-	mov 	r7, #0
-	mov	r8, #0			@ pass null pointer as atag
-2 :
-
-#endif /* CONFIG_ZBOOT_ROM */
diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h
deleted file mode 100644
index 80f599f4b5ab..000000000000
--- a/arch/arm/mach-shmobile/include/mach/zboot.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef ZBOOT_H
-#define ZBOOT_H
-
-#include <mach/zboot_macros.h>
-
-/**************************************************
- *
- *		board specific settings
- *
- **************************************************/
-
-#error "unsupported board."
-
-#endif /* ZBOOT_H */
diff --git a/arch/arm/mach-shmobile/include/mach/zboot_macros.h b/arch/arm/mach-shmobile/include/mach/zboot_macros.h
deleted file mode 100644
index 14fd3d538e9a..000000000000
--- a/arch/arm/mach-shmobile/include/mach/zboot_macros.h
+++ /dev/null
@@ -1,108 +0,0 @@
-#ifndef __ZBOOT_MACRO_H
-#define __ZBOOT_MACRO_H
-
-/* The LIST command is used to include comments in the script */
-.macro	LIST comment
-.endm
-
-/* The ED command is used to write a 32-bit word */
-.macro ED, addr, data
-	LDR	r0, 1f
-	LDR	r1, 2f
-	STR	r1, [r0]
-	B	3f
-1 :	.long	\addr
-2 :	.long	\data
-3 :
-.endm
-
-/* The EW command is used to write a 16-bit word */
-.macro EW, addr, data
-	LDR	r0, 1f
-	LDR	r1, 2f
-	STRH	r1, [r0]
-	B	3f
-1 :	.long	\addr
-2 :	.long	\data
-3 :
-.endm
-
-/* The EB command is used to write an 8-bit word */
-.macro EB, addr, data
-	LDR	r0, 1f
-	LDR	r1, 2f
-	STRB	r1, [r0]
-	B	3f
-1 :	.long	\addr
-2 :	.long	\data
-3 :
-.endm
-
-/* The WAIT command is used to delay the execution */
-.macro  WAIT, time, reg
-	LDR	r1, 1f
-	LDR	r0, 2f
-	STR	r0, [r1]
-10 :
-	LDR	r0, [r1]
-	CMP	r0, #0x00000000
-	BNE	10b
-	NOP
-	B	3f
-1 :	.long	\reg
-2 :	.long	\time * 100
-3 :
-.endm
-
-/* The DD command is used to read a 32-bit word */
-.macro  DD, start, end
-	LDR	r1, 1f
-	B	2f
-1 :	.long	\start
-2 :
-.endm
-
-/* loop until a given value has been read (with mask) */
-.macro WAIT_MASK, addr, data, cmp
-	LDR	r0, 2f
-	LDR	r1, 3f
-	LDR	r2, 4f
-1:
-	LDR	r3, [r0, #0]
-	AND	r3, r1, r3
-	CMP	r2, r3
-	BNE	1b
-	B	5f
-2:	.long	\addr
-3:	.long	\data
-4:	.long	\cmp
-5:
-.endm
-
-/* read 32-bit value from addr, "or" an immediate and write back */
-.macro ED_OR, addr, data
-	LDR r4, 1f
-	LDR r5, 2f
-	LDR r6, [r4]
-	ORR r5, r6, r5
-	STR r5, [r4]
-	B	3f
-1:	.long	\addr
-2:	.long	\data
-3:
-.endm
-
-/* read 32-bit value from addr, "and" an immediate and write back */
-.macro ED_AND, addr, data
-	LDR r4, 1f
-	LDR r5, 2f
-	LDR r6, [r4]
-	AND r5, r6, r5
-	STR r5, [r4]
-	B	3f
-1:	.long \addr
-2:	.long \data
-3:
-.endm
-
-#endif /* __ZBOOT_MACRO_H */
-- 
2.1.4

[PATCH 15/16] ARM: shmobile: R-Car Gen2: CONFIG_ARCH_SHMOBILE_MULTI is always set

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Since commit e042681894b62d60 ("ARM: shmobile: r8a7790: Remove legacy
code"), all R-Car Gen2 SoCs are supported by multiplatform kernels only.
As CONFIG_ARCH_SHMOBILE_MULTI is always set for shmobile multiplatform
kernels, we can remove related #ifdefs in code specific to R-Car Gen2
SoCs.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-rcar-gen2.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 5d13595aa027..aa3339258d9c 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -128,9 +128,7 @@ void __init rcar_gen2_timer_init(void)
 #endif /* CONFIG_ARM_ARCH_TIMER */
 
 	rcar_gen2_clocks_init(mode);
-#ifdef CONFIG_ARCH_SHMOBILE_MULTI
 	clocksource_of_init();
-#endif
 }
 
 struct memory_reserve_config {
-- 
2.1.4

[PATCH 15/16] ARM: shmobile: R-Car Gen2: CONFIG_ARCH_SHMOBILE_MULTI is always set

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Since commit e042681894b62d60 ("ARM: shmobile: r8a7790: Remove legacy
code"), all R-Car Gen2 SoCs are supported by multiplatform kernels only.
As CONFIG_ARCH_SHMOBILE_MULTI is always set for shmobile multiplatform
kernels, we can remove related #ifdefs in code specific to R-Car Gen2
SoCs.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-rcar-gen2.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 5d13595aa027..aa3339258d9c 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -128,9 +128,7 @@ void __init rcar_gen2_timer_init(void)
 #endif /* CONFIG_ARM_ARCH_TIMER */
 
 	rcar_gen2_clocks_init(mode);
-#ifdef CONFIG_ARCH_SHMOBILE_MULTI
 	clocksource_of_init();
-#endif
 }
 
 struct memory_reserve_config {
-- 
2.1.4

[PATCH 16/16] ARM: shmobile: timer: r8a73a4 and r8a7790 are multi-platform only

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Since commits e042681894b62d60 ("ARM: shmobile: r8a7790: Remove legacy
code") and 9d07d414d4c33d86 ("ARM: shmobile: r8a73a4: ape6evm: Remove
legacy platform"), the R-Mobile APE6 and R-Car H2 SoCs are supported by
multiplatform kernels only.
Hence we can drop checks for these SoCs in legacy kernel builds.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/timer.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 0edf2a6d2bbe..f1d027aa7a81 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -70,18 +70,6 @@ void __init shmobile_init_delay(void)
 	if (!max_freq)
 		return;
 
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
-	/* Non-multiplatform r8a73a4 SoC cannot use arch timer due
-	 * to GIC being initialized from C and arch timer via DT */
-	if (of_machine_is_compatible("renesas,r8a73a4"))
-		has_arch_timer = false;
-
-	/* Non-multiplatform r8a7790 SoC cannot use arch timer due
-	 * to GIC being initialized from C and arch timer via DT */
-	if (of_machine_is_compatible("renesas,r8a7790"))
-		has_arch_timer = false;
-#endif
-
 	if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) {
 		if (is_a7_a8_a9)
 			shmobile_setup_delay_hz(max_freq, 1, 3);
-- 
2.1.4

[PATCH 16/16] ARM: shmobile: timer: r8a73a4 and r8a7790 are multi-platform only

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Since commits e042681894b62d60 ("ARM: shmobile: r8a7790: Remove legacy
code") and 9d07d414d4c33d86 ("ARM: shmobile: r8a73a4: ape6evm: Remove
legacy platform"), the R-Mobile APE6 and R-Car H2 SoCs are supported by
multiplatform kernels only.
Hence we can drop checks for these SoCs in legacy kernel builds.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/timer.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 0edf2a6d2bbe..f1d027aa7a81 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -70,18 +70,6 @@ void __init shmobile_init_delay(void)
 	if (!max_freq)
 		return;
 
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
-	/* Non-multiplatform r8a73a4 SoC cannot use arch timer due
-	 * to GIC being initialized from C and arch timer via DT */
-	if (of_machine_is_compatible("renesas,r8a73a4"))
-		has_arch_timer = false;
-
-	/* Non-multiplatform r8a7790 SoC cannot use arch timer due
-	 * to GIC being initialized from C and arch timer via DT */
-	if (of_machine_is_compatible("renesas,r8a7790"))
-		has_arch_timer = false;
-#endif
-
 	if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) {
 		if (is_a7_a8_a9)
 			shmobile_setup_delay_hz(max_freq, 1, 3);
-- 
2.1.4

Re: [GIT PULL] Renesas ARM Based SoC Cleanup for v4.3

[Olof Johansson]

On Fri, Jul 10, 2015 at 03:37:01PM +0900, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these Renesas ARM based SoC cleanup for v4.3.
> 
> Amongst other things it removes almost 7000 lines of code :)
> 

Nice! Merged. Thanks.


-Olof

[GIT PULL] Renesas ARM Based SoC Cleanup for v4.3

[Olof Johansson]

On Fri, Jul 10, 2015 at 03:37:01PM +0900, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these Renesas ARM based SoC cleanup for v4.3.
> 
> Amongst other things it removes almost 7000 lines of code :)
> 

Nice! Merged. Thanks.


-Olof

[GIT PULL] Renesas ARM Based SoC Cleanup for v4.4

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC cleanup for v4.4.

 24 files changed, 4 insertions(+), 2687 deletions(-)

Is a pleasing diffstat if I do say so myself.

Of particular note the last legacy board code for Renesas ARM based SoCs,
that of the bockw board, is removed in this pull request.


The following changes since commit 6ff33f3902c3b1c5d0db6b1e2c70b6d76fba357f:

  Linux 4.3-rc1 (2015-09-12 16:35:56 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v4.4

for you to fetch changes up to 04418c23a9411b85b8789eab5f4397bcbd62b7b4:

  ARM: shmobile: Remove legacy clock support leftovers (2015-09-14 10:06:56 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC Cleanup for v4.4

* Remove bockw/r8a7798 legacy board and SoC code
* Many cleanups relating to legacy board and SoC code removal

----------------------------------------------------------------
Geert Uytterhoeven (7):
      ARM: shmobile: Remove unused declaration of r8a7778_add_standard_devices_dt()
      ARM: shmobile: Remove obsolete sh-gpio.h
      ARM: shmobile: Remove obsolete custom earlyprintk code
      ARM: shmobile: Remove obsolete intc.h
      ARM: shmobile: Remove obsolete legacy PM Domain leftovers
      ARM: shmobile: Remove obsolete earlytimer registration
      ARM: shmobile: Remove obsolete twd_local_timer declaration

Laurent Pinchart (1):
      ARM: shmobile: Remove legacy clock support leftovers

Simon Horman (1):
      ARM: shmobile: remove Makefile.boot

Ulrich Hecht (12):
      ARM: shmobile: bockw: remove "reference" device tree
      ARM: shmobile: bockw: remove "reference" board file and config
      ARM: shmobile: remove paragraph on DT reference platforms
      ARM: shmobile: bockw: remove legacy board file and config
      ARM: shmobile: r8a7778: remove obsolete setup code
      ARM: shmobile: Kconfig: remove obsolete option ARCH_R8A7778
      ARM: shmobile: r8a7778: remove legacy clock implementation
      ARM: shmobile: remove ARCH_SHMOBILE_LEGACY option
      ARM: shmobile: bockw: remove legacy defconfig
      MAINTAINERS: remove references to dropped marzen and bockw defconfigs
      ARM: shmobile: bockw: remove legacy DTB build target
      ARM: shmobile: Kconfig: remove unused SHMOBILE_TIMER_HZ section

 Documentation/devicetree/bindings/arm/shmobile.txt |   6 -
 MAINTAINERS                                        |   2 -
 arch/arm/Kconfig                                   |  26 +-
 arch/arm/Kconfig.debug                             |   3 +-
 arch/arm/boot/dts/Makefile                         |   3 -
 arch/arm/boot/dts/r8a7778-bockw-reference.dts      | 139 ----
 arch/arm/configs/bockw_defconfig                   | 133 ----
 arch/arm/mach-shmobile/Kconfig                     |  73 --
 arch/arm/mach-shmobile/Makefile                    |  14 +-
 arch/arm/mach-shmobile/Makefile.boot               |  12 -
 arch/arm/mach-shmobile/board-bockw-reference.c     |  86 ---
 arch/arm/mach-shmobile/board-bockw.c               | 737 ---------------------
 arch/arm/mach-shmobile/clock-r8a7778.c             | 342 ----------
 arch/arm/mach-shmobile/clock.c                     |  47 --
 arch/arm/mach-shmobile/clock.h                     |  42 --
 arch/arm/mach-shmobile/common.h                    |   5 -
 arch/arm/mach-shmobile/console.c                   |  27 -
 arch/arm/mach-shmobile/intc.h                      | 295 ---------
 arch/arm/mach-shmobile/pm-rmobile.h                |   9 -
 arch/arm/mach-shmobile/r8a7778.h                   |  78 ---
 arch/arm/mach-shmobile/r8a7779.h                   |   2 -
 arch/arm/mach-shmobile/setup-r8a7778.c             | 560 +---------------
 arch/arm/mach-shmobile/sh-gpio.h                   |  29 -
 arch/arm/mach-shmobile/timer.c                     |  21 -
 24 files changed, 4 insertions(+), 2687 deletions(-)
 delete mode 100644 arch/arm/boot/dts/r8a7778-bockw-reference.dts
 delete mode 100644 arch/arm/configs/bockw_defconfig
 delete mode 100644 arch/arm/mach-shmobile/Makefile.boot
 delete mode 100644 arch/arm/mach-shmobile/board-bockw-reference.c
 delete mode 100644 arch/arm/mach-shmobile/board-bockw.c
 delete mode 100644 arch/arm/mach-shmobile/clock-r8a7778.c
 delete mode 100644 arch/arm/mach-shmobile/clock.c
 delete mode 100644 arch/arm/mach-shmobile/clock.h
 delete mode 100644 arch/arm/mach-shmobile/console.c
 delete mode 100644 arch/arm/mach-shmobile/intc.h
 delete mode 100644 arch/arm/mach-shmobile/r8a7778.h
 delete mode 100644 arch/arm/mach-shmobile/sh-gpio.h

[GIT PULL] Renesas ARM Based SoC Cleanup for v4.4

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC cleanup for v4.4.

 24 files changed, 4 insertions(+), 2687 deletions(-)

Is a pleasing diffstat if I do say so myself.

Of particular note the last legacy board code for Renesas ARM based SoCs,
that of the bockw board, is removed in this pull request.


The following changes since commit 6ff33f3902c3b1c5d0db6b1e2c70b6d76fba357f:

  Linux 4.3-rc1 (2015-09-12 16:35:56 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v4.4

for you to fetch changes up to 04418c23a9411b85b8789eab5f4397bcbd62b7b4:

  ARM: shmobile: Remove legacy clock support leftovers (2015-09-14 10:06:56 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC Cleanup for v4.4

* Remove bockw/r8a7798 legacy board and SoC code
* Many cleanups relating to legacy board and SoC code removal

----------------------------------------------------------------
Geert Uytterhoeven (7):
      ARM: shmobile: Remove unused declaration of r8a7778_add_standard_devices_dt()
      ARM: shmobile: Remove obsolete sh-gpio.h
      ARM: shmobile: Remove obsolete custom earlyprintk code
      ARM: shmobile: Remove obsolete intc.h
      ARM: shmobile: Remove obsolete legacy PM Domain leftovers
      ARM: shmobile: Remove obsolete earlytimer registration
      ARM: shmobile: Remove obsolete twd_local_timer declaration

Laurent Pinchart (1):
      ARM: shmobile: Remove legacy clock support leftovers

Simon Horman (1):
      ARM: shmobile: remove Makefile.boot

Ulrich Hecht (12):
      ARM: shmobile: bockw: remove "reference" device tree
      ARM: shmobile: bockw: remove "reference" board file and config
      ARM: shmobile: remove paragraph on DT reference platforms
      ARM: shmobile: bockw: remove legacy board file and config
      ARM: shmobile: r8a7778: remove obsolete setup code
      ARM: shmobile: Kconfig: remove obsolete option ARCH_R8A7778
      ARM: shmobile: r8a7778: remove legacy clock implementation
      ARM: shmobile: remove ARCH_SHMOBILE_LEGACY option
      ARM: shmobile: bockw: remove legacy defconfig
      MAINTAINERS: remove references to dropped marzen and bockw defconfigs
      ARM: shmobile: bockw: remove legacy DTB build target
      ARM: shmobile: Kconfig: remove unused SHMOBILE_TIMER_HZ section

 Documentation/devicetree/bindings/arm/shmobile.txt |   6 -
 MAINTAINERS                                        |   2 -
 arch/arm/Kconfig                                   |  26 +-
 arch/arm/Kconfig.debug                             |   3 +-
 arch/arm/boot/dts/Makefile                         |   3 -
 arch/arm/boot/dts/r8a7778-bockw-reference.dts      | 139 ----
 arch/arm/configs/bockw_defconfig                   | 133 ----
 arch/arm/mach-shmobile/Kconfig                     |  73 --
 arch/arm/mach-shmobile/Makefile                    |  14 +-
 arch/arm/mach-shmobile/Makefile.boot               |  12 -
 arch/arm/mach-shmobile/board-bockw-reference.c     |  86 ---
 arch/arm/mach-shmobile/board-bockw.c               | 737 ---------------------
 arch/arm/mach-shmobile/clock-r8a7778.c             | 342 ----------
 arch/arm/mach-shmobile/clock.c                     |  47 --
 arch/arm/mach-shmobile/clock.h                     |  42 --
 arch/arm/mach-shmobile/common.h                    |   5 -
 arch/arm/mach-shmobile/console.c                   |  27 -
 arch/arm/mach-shmobile/intc.h                      | 295 ---------
 arch/arm/mach-shmobile/pm-rmobile.h                |   9 -
 arch/arm/mach-shmobile/r8a7778.h                   |  78 ---
 arch/arm/mach-shmobile/r8a7779.h                   |   2 -
 arch/arm/mach-shmobile/setup-r8a7778.c             | 560 +---------------
 arch/arm/mach-shmobile/sh-gpio.h                   |  29 -
 arch/arm/mach-shmobile/timer.c                     |  21 -
 24 files changed, 4 insertions(+), 2687 deletions(-)
 delete mode 100644 arch/arm/boot/dts/r8a7778-bockw-reference.dts
 delete mode 100644 arch/arm/configs/bockw_defconfig
 delete mode 100644 arch/arm/mach-shmobile/Makefile.boot
 delete mode 100644 arch/arm/mach-shmobile/board-bockw-reference.c
 delete mode 100644 arch/arm/mach-shmobile/board-bockw.c
 delete mode 100644 arch/arm/mach-shmobile/clock-r8a7778.c
 delete mode 100644 arch/arm/mach-shmobile/clock.c
 delete mode 100644 arch/arm/mach-shmobile/clock.h
 delete mode 100644 arch/arm/mach-shmobile/console.c
 delete mode 100644 arch/arm/mach-shmobile/intc.h
 delete mode 100644 arch/arm/mach-shmobile/r8a7778.h
 delete mode 100644 arch/arm/mach-shmobile/sh-gpio.h

[PATCH 01/21] ARM: shmobile: Remove unused declaration of r8a7778_add_standard_devices_dt()

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The actual implementation was removed by commit 40216263d3d0b9b4 ("ARM:
shmobile: Remove unused r8a7778 auxdata and callback") in v3.12.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/r8a7778.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/r8a7778.h b/arch/arm/mach-shmobile/r8a7778.h
index f64fedb1f2cc..0e77f3f81123 100644
--- a/arch/arm/mach-shmobile/r8a7778.h
+++ b/arch/arm/mach-shmobile/r8a7778.h
@@ -63,7 +63,6 @@ enum {
 };
 
 extern void r8a7778_add_standard_devices(void);
-extern void r8a7778_add_standard_devices_dt(void);
 extern void r8a7778_add_dt_devices(void);
 
 extern void r8a7778_init_late(void);
-- 
2.1.4

[PATCH 01/21] ARM: shmobile: Remove unused declaration of r8a7778_add_standard_devices_dt()

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The actual implementation was removed by commit 40216263d3d0b9b4 ("ARM:
shmobile: Remove unused r8a7778 auxdata and callback") in v3.12.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/r8a7778.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/r8a7778.h b/arch/arm/mach-shmobile/r8a7778.h
index f64fedb1f2cc..0e77f3f81123 100644
--- a/arch/arm/mach-shmobile/r8a7778.h
+++ b/arch/arm/mach-shmobile/r8a7778.h
@@ -63,7 +63,6 @@ enum {
 };
 
 extern void r8a7778_add_standard_devices(void);
-extern void r8a7778_add_standard_devices_dt(void);
 extern void r8a7778_add_dt_devices(void);
 
 extern void r8a7778_init_late(void);
-- 
2.1.4

[PATCH 02/21] ARM: shmobile: Remove obsolete sh-gpio.h

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last user of "sh-gpio.h" was removed in commit 1fa59bda21c7fa36
("ARM: shmobile: Remove legacy board code for Armadillo-800 EVA").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/sh-gpio.h | 29 -----------------------------
 1 file changed, 29 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/sh-gpio.h

diff --git a/arch/arm/mach-shmobile/sh-gpio.h b/arch/arm/mach-shmobile/sh-gpio.h
deleted file mode 100644
index 2c4141413db9..000000000000
--- a/arch/arm/mach-shmobile/sh-gpio.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Generic GPIO API and pinmux table support
- *
- * Copyright (c) 2008  Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-
-/*
- * FIXME !!
- *
- * current gpio frame work doesn't have
- * the method to control only pull up/down/free.
- * this function should be replaced by correct gpio function
- */
-static inline void __init gpio_direction_none(void __iomem * addr)
-{
-	__raw_writeb(0x00, addr);
-}
-
-#endif /* __ASM_ARCH_GPIO_H */
-- 
2.1.4

[PATCH 02/21] ARM: shmobile: Remove obsolete sh-gpio.h

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last user of "sh-gpio.h" was removed in commit 1fa59bda21c7fa36
("ARM: shmobile: Remove legacy board code for Armadillo-800 EVA").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/sh-gpio.h | 29 -----------------------------
 1 file changed, 29 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/sh-gpio.h

diff --git a/arch/arm/mach-shmobile/sh-gpio.h b/arch/arm/mach-shmobile/sh-gpio.h
deleted file mode 100644
index 2c4141413db9..000000000000
--- a/arch/arm/mach-shmobile/sh-gpio.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Generic GPIO API and pinmux table support
- *
- * Copyright (c) 2008  Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-
-/*
- * FIXME !!
- *
- * current gpio frame work doesn't have
- * the method to control only pull up/down/free.
- * this function should be replaced by correct gpio function
- */
-static inline void __init gpio_direction_none(void __iomem * addr)
-{
-	__raw_writeb(0x00, addr);
-}
-
-#endif /* __ASM_ARCH_GPIO_H */
-- 
2.1.4

[PATCH 03/21] ARM: shmobile: Remove obsolete custom earlyprintk code

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last caller of shmobile_setup_console() was removed in commit
44d88c754e57a6d9 ("ARM: shmobile: Remove legacy SoC code for R-Mobile
A1").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Makefile  |  2 +-
 arch/arm/mach-shmobile/common.h  |  1 -
 arch/arm/mach-shmobile/console.c | 27 ---------------------------
 3 files changed, 1 insertion(+), 29 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/console.c

diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 476de30798d7..b02841528e05 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common objects
-obj-y				:= timer.o console.o
+obj-y				:= timer.o
 
 # CPU objects
 obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o
diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index 8d27ec546a35..ee8fe9e473d7 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -4,7 +4,6 @@
 extern void shmobile_earlytimer_init(void);
 extern void shmobile_init_delay(void);
 struct twd_local_timer;
-extern void shmobile_setup_console(void);
 extern void shmobile_boot_vector(void);
 extern unsigned long shmobile_boot_fn;
 extern unsigned long shmobile_boot_arg;
diff --git a/arch/arm/mach-shmobile/console.c b/arch/arm/mach-shmobile/console.c
deleted file mode 100644
index e329ccbd0a67..000000000000
--- a/arch/arm/mach-shmobile/console.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * SH-Mobile Console
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/mach/map.h>
-#include "common.h"
-
-void __init shmobile_setup_console(void)
-{
-	parse_early_param();
-
-	/* Let earlyprintk output early console messages */
-	early_platform_driver_probe("earlyprintk", 1, 1);
-}
-- 
2.1.4

[PATCH 03/21] ARM: shmobile: Remove obsolete custom earlyprintk code

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last caller of shmobile_setup_console() was removed in commit
44d88c754e57a6d9 ("ARM: shmobile: Remove legacy SoC code for R-Mobile
A1").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Makefile  |  2 +-
 arch/arm/mach-shmobile/common.h  |  1 -
 arch/arm/mach-shmobile/console.c | 27 ---------------------------
 3 files changed, 1 insertion(+), 29 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/console.c

diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 476de30798d7..b02841528e05 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common objects
-obj-y				:= timer.o console.o
+obj-y				:= timer.o
 
 # CPU objects
 obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o
diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index 8d27ec546a35..ee8fe9e473d7 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -4,7 +4,6 @@
 extern void shmobile_earlytimer_init(void);
 extern void shmobile_init_delay(void);
 struct twd_local_timer;
-extern void shmobile_setup_console(void);
 extern void shmobile_boot_vector(void);
 extern unsigned long shmobile_boot_fn;
 extern unsigned long shmobile_boot_arg;
diff --git a/arch/arm/mach-shmobile/console.c b/arch/arm/mach-shmobile/console.c
deleted file mode 100644
index e329ccbd0a67..000000000000
--- a/arch/arm/mach-shmobile/console.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * SH-Mobile Console
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/mach/map.h>
-#include "common.h"
-
-void __init shmobile_setup_console(void)
-{
-	parse_early_param();
-
-	/* Let earlyprintk output early console messages */
-	early_platform_driver_probe("earlyprintk", 1, 1);
-}
-- 
2.1.4

[PATCH 04/21] ARM: shmobile: Remove obsolete intc.h

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last user of "intc.h" was removed in commit 9a9863987bf7307f ("ARM:
shmobile: Remove legacy SoC code for SH-Mobile AG5").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/intc.h | 295 ------------------------------------------
 1 file changed, 295 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/intc.h

diff --git a/arch/arm/mach-shmobile/intc.h b/arch/arm/mach-shmobile/intc.h
deleted file mode 100644
index 40b2ad4ca5b4..000000000000
--- a/arch/arm/mach-shmobile/intc.h
+++ /dev/null
@@ -1,295 +0,0 @@
-#ifndef __ASM_MACH_INTC_H
-#define __ASM_MACH_INTC_H
-#include <linux/sh_intc.h>
-
-#define INTC_IRQ_PINS_ENUM_16L(p)				\
-	p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7,		\
-	p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,	\
-	p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15
-
-#define INTC_IRQ_PINS_ENUM_16H(p)				\
-	p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,	\
-	p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23,	\
-	p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,	\
-	p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31
-
-#define INTC_IRQ_PINS_VECT_16L(p, vect)				\
-	vect(p ## _IRQ0, 0x0200), vect(p ## _IRQ1, 0x0220),	\
-	vect(p ## _IRQ2, 0x0240), vect(p ## _IRQ3, 0x0260),	\
-	vect(p ## _IRQ4, 0x0280), vect(p ## _IRQ5, 0x02a0),	\
-	vect(p ## _IRQ6, 0x02c0), vect(p ## _IRQ7, 0x02e0),	\
-	vect(p ## _IRQ8, 0x0300), vect(p ## _IRQ9, 0x0320),	\
-	vect(p ## _IRQ10, 0x0340), vect(p ## _IRQ11, 0x0360),	\
-	vect(p ## _IRQ12, 0x0380), vect(p ## _IRQ13, 0x03a0),	\
-	vect(p ## _IRQ14, 0x03c0), vect(p ## _IRQ15, 0x03e0)
-
-#define INTC_IRQ_PINS_VECT_16H(p, vect)				\
-	vect(p ## _IRQ16, 0x3200), vect(p ## _IRQ17, 0x3220),	\
-	vect(p ## _IRQ18, 0x3240), vect(p ## _IRQ19, 0x3260),	\
-	vect(p ## _IRQ20, 0x3280), vect(p ## _IRQ21, 0x32a0),	\
-	vect(p ## _IRQ22, 0x32c0), vect(p ## _IRQ23, 0x32e0),	\
-	vect(p ## _IRQ24, 0x3300), vect(p ## _IRQ25, 0x3320),	\
-	vect(p ## _IRQ26, 0x3340), vect(p ## _IRQ27, 0x3360),	\
-	vect(p ## _IRQ28, 0x3380), vect(p ## _IRQ29, 0x33a0),	\
-	vect(p ## _IRQ30, 0x33c0), vect(p ## _IRQ31, 0x33e0)
-
-#define INTC_IRQ_PINS_MASK_16L(p, base)					\
-	{ base + 0x40, base + 0x60, 8, /* INTMSK00A / INTMSKCLR00A */	\
-	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
-	{ base + 0x44, base + 0x64, 8, /* INTMSK10A / INTMSKCLR10A */	\
-	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
-	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_MASK_16H(p, base)					\
-	{ base + 0x48, base + 0x68, 8, /* INTMSK20A / INTMSKCLR20A */	\
-	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
-	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
-	{ base + 0x4c, base + 0x6c, 8, /* INTMSK30A / INTMSKCLR30A */	\
-	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
-	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_PRIO_16L(p, base)					\
-	{ base + 0x10, 0, 32, 4, /* INTPRI00A */			\
-	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
-	{ base + 0x14, 0, 32, 4, /* INTPRI10A */			\
-	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
-	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_PRIO_16H(p, base)					\
-	{ base + 0x18, 0, 32, 4, /* INTPRI20A */			\
-	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
-	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
-	{ base + 0x1c, 0, 32, 4, /* INTPRI30A */			\
-	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
-	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_SENSE_16L(p, base)				\
-	{ base + 0x00, 32, 4, /* ICR1A */				\
-	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
-	{ base + 0x04, 32, 4, /* ICR2A */				\
-	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
-	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_SENSE_16H(p, base)				\
-	{ base + 0x08, 32, 4, /* ICR3A */				\
-	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
-	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
-	{ base + 0x0c, 32, 4, /* ICR4A */				\
-	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
-	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_ACK_16L(p, base)					\
-	{ base + 0x20, 0, 8, /* INTREQ00A */				\
-	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
-	{ base + 0x24, 0, 8, /* INTREQ10A */				\
-	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
-	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_ACK_16H(p, base)					\
-	{ base + 0x28, 0, 8, /* INTREQ20A */				\
-	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
-	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
-	{ base + 0x2c, 0, 8, /* INTREQ30A */				\
-	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
-	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_16(p, base, vect, str)				\
-									\
-static struct resource p ## _resources[] __initdata = {			\
-	[0] = {								\
-		.start	= base,						\
-		.end	= base + 0x64,					\
-		.flags	= IORESOURCE_MEM,				\
-	},								\
-};									\
-									\
-enum {									\
-	p ## _UNUSED = 0,						\
-	INTC_IRQ_PINS_ENUM_16L(p),					\
-};									\
-									\
-static struct intc_vect p ## _vectors[] __initdata = {			\
-	INTC_IRQ_PINS_VECT_16L(p, vect),				\
-};									\
-									\
-static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
-	INTC_IRQ_PINS_MASK_16L(p, base),				\
-};									\
-									\
-static struct intc_prio_reg p ## _prio_registers[] __initdata = {	\
-	INTC_IRQ_PINS_PRIO_16L(p, base),				\
-};									\
-									\
-static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
-	INTC_IRQ_PINS_SENSE_16L(p, base),				\
-};									\
-									\
-static struct intc_mask_reg p ## _ack_registers[] __initdata = {	\
-	INTC_IRQ_PINS_ACK_16L(p, base),					\
-};									\
-									\
-static struct intc_desc p ## _desc __initdata = {			\
-	.name = str,							\
-	.resource = p ## _resources,					\
-	.num_resources = ARRAY_SIZE(p ## _resources),			\
-	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
-			     p ## _mask_registers, p ## _prio_registers, \
-			     p ## _sense_registers, p ## _ack_registers) \
-}
-
-#define INTC_IRQ_PINS_16H(p, base, vect, str)				\
-									\
-static struct resource p ## _resources[] __initdata = {			\
-	[0] = {								\
-		.start	= base,						\
-		.end	= base + 0x64,					\
-		.flags	= IORESOURCE_MEM,				\
-	},								\
-};									\
-									\
-enum {									\
-	p ## _UNUSED = 0,						\
-	INTC_IRQ_PINS_ENUM_16H(p),					\
-};									\
-									\
-static struct intc_vect p ## _vectors[] __initdata = {			\
-	INTC_IRQ_PINS_VECT_16H(p, vect),				\
-};									\
-									\
-static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
-	INTC_IRQ_PINS_MASK_16H(p, base),				\
-};									\
-									\
-static struct intc_prio_reg p ## _prio_registers[] __initdata = {	\
-	INTC_IRQ_PINS_PRIO_16H(p, base),				\
-};									\
-									\
-static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
-	INTC_IRQ_PINS_SENSE_16H(p, base),				\
-};									\
-									\
-static struct intc_mask_reg p ## _ack_registers[] __initdata = {	\
-	INTC_IRQ_PINS_ACK_16H(p, base),					\
-};									\
-									\
-static struct intc_desc p ## _desc __initdata = {			\
-	.name = str,							\
-	.resource = p ## _resources,					\
-	.num_resources = ARRAY_SIZE(p ## _resources),			\
-	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
-			     p ## _mask_registers, p ## _prio_registers, \
-			     p ## _sense_registers, p ## _ack_registers) \
-}
-
-#define INTC_IRQ_PINS_32(p, base, vect, str)				\
-									\
-static struct resource p ## _resources[] __initdata = {			\
-	[0] = {								\
-		.start	= base,						\
-		.end	= base + 0x6c,					\
-		.flags	= IORESOURCE_MEM,				\
-	},								\
-};									\
-									\
-enum {									\
-	p ## _UNUSED = 0,						\
-	INTC_IRQ_PINS_ENUM_16L(p),					\
-	INTC_IRQ_PINS_ENUM_16H(p),					\
-};									\
-									\
-static struct intc_vect p ## _vectors[] __initdata = {			\
-	INTC_IRQ_PINS_VECT_16L(p, vect),				\
-	INTC_IRQ_PINS_VECT_16H(p, vect),				\
-};									\
-									\
-static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
-	INTC_IRQ_PINS_MASK_16L(p, base),				\
-	INTC_IRQ_PINS_MASK_16H(p, base),				\
-};									\
-									\
-static struct intc_prio_reg p ## _prio_registers[] __initdata = {	\
-	INTC_IRQ_PINS_PRIO_16L(p, base),				\
-	INTC_IRQ_PINS_PRIO_16H(p, base),				\
-};									\
-									\
-static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
-	INTC_IRQ_PINS_SENSE_16L(p, base),				\
-	INTC_IRQ_PINS_SENSE_16H(p, base),				\
-};									\
-									\
-static struct intc_mask_reg p ## _ack_registers[] __initdata = {	\
-	INTC_IRQ_PINS_ACK_16L(p, base),					\
-	INTC_IRQ_PINS_ACK_16H(p, base),					\
-};									\
-									\
-static struct intc_desc p ## _desc __initdata = {			\
-	.name = str,							\
-	.resource = p ## _resources,					\
-	.num_resources = ARRAY_SIZE(p ## _resources),			\
-	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
-			     p ## _mask_registers, p ## _prio_registers, \
-			     p ## _sense_registers, p ## _ack_registers) \
-}
-
-#define INTC_PINT_E_EMPTY
-#define INTC_PINT_E_NONE 0, 0, 0, 0, 0, 0, 0, 0,
-#define INTC_PINT_E(p)							\
-	PINT ## p ## 0, PINT ## p ## 1, PINT ## p ## 2, PINT ## p ## 3,	\
-	PINT ## p ## 4, PINT ## p ## 5, PINT ## p ## 6, PINT ## p ## 7,
-
-#define INTC_PINT_V_NONE
-#define INTC_PINT_V(p, vect)					\
-	vect(PINT ## p ## 0, 0), vect(PINT ## p ## 1, 1),	\
-	vect(PINT ## p ## 2, 2), vect(PINT ## p ## 3, 3),	\
-	vect(PINT ## p ## 4, 4), vect(PINT ## p ## 5, 5),	\
-	vect(PINT ## p ## 6, 6), vect(PINT ## p ## 7, 7),
-
-#define INTC_PINT(p, mask_reg, sense_base, str,				\
-	enums_1, enums_2, enums_3, enums_4,				\
-	vect_1, vect_2, vect_3, vect_4,					\
-	mask_a, mask_b, mask_c, mask_d,					\
-	sense_a, sense_b, sense_c, sense_d)				\
-									\
-enum {									\
-	PINT ## p ## _UNUSED = 0,					\
-	enums_1 enums_2 enums_3 enums_4 				\
-};									\
-									\
-static struct intc_vect p ## _vectors[] __initdata = {			\
-	vect_1 vect_2 vect_3 vect_4					\
-};									\
-									\
-static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
-	{ mask_reg, 0, 32, /* PINTER */					\
-	  { mask_a mask_b mask_c mask_d } }				\
-};									\
-									\
-static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
-	{ sense_base + 0x00, 16, 2, /* PINTCR */			\
-	  { sense_a } },						\
-	{ sense_base + 0x04, 16, 2, /* PINTCR */			\
-	  { sense_b } },						\
-	{ sense_base + 0x08, 16, 2, /* PINTCR */			\
-	  { sense_c } },						\
-	{ sense_base + 0x0c, 16, 2, /* PINTCR */			\
-	  { sense_d } },						\
-};									\
-									\
-static struct intc_desc p ## _desc __initdata = {			\
-	.name = str,							\
-	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
-			     p ## _mask_registers, NULL,		\
-			     p ## _sense_registers, NULL),		\
-}
-
-/* INTCS */
-#define INTCS_VECT_BASE		0x3400
-#define INTCS_VECT(n, vect)	INTC_VECT((n), INTCS_VECT_BASE + (vect))
-#define intcs_evt2irq(evt)	evt2irq(INTCS_VECT_BASE + (evt))
-
-#endif  /* __ASM_MACH_INTC_H */
-- 
2.1.4

[PATCH 04/21] ARM: shmobile: Remove obsolete intc.h

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last user of "intc.h" was removed in commit 9a9863987bf7307f ("ARM:
shmobile: Remove legacy SoC code for SH-Mobile AG5").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/intc.h | 295 ------------------------------------------
 1 file changed, 295 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/intc.h

diff --git a/arch/arm/mach-shmobile/intc.h b/arch/arm/mach-shmobile/intc.h
deleted file mode 100644
index 40b2ad4ca5b4..000000000000
--- a/arch/arm/mach-shmobile/intc.h
+++ /dev/null
@@ -1,295 +0,0 @@
-#ifndef __ASM_MACH_INTC_H
-#define __ASM_MACH_INTC_H
-#include <linux/sh_intc.h>
-
-#define INTC_IRQ_PINS_ENUM_16L(p)				\
-	p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7,		\
-	p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,	\
-	p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15
-
-#define INTC_IRQ_PINS_ENUM_16H(p)				\
-	p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,	\
-	p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23,	\
-	p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,	\
-	p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31
-
-#define INTC_IRQ_PINS_VECT_16L(p, vect)				\
-	vect(p ## _IRQ0, 0x0200), vect(p ## _IRQ1, 0x0220),	\
-	vect(p ## _IRQ2, 0x0240), vect(p ## _IRQ3, 0x0260),	\
-	vect(p ## _IRQ4, 0x0280), vect(p ## _IRQ5, 0x02a0),	\
-	vect(p ## _IRQ6, 0x02c0), vect(p ## _IRQ7, 0x02e0),	\
-	vect(p ## _IRQ8, 0x0300), vect(p ## _IRQ9, 0x0320),	\
-	vect(p ## _IRQ10, 0x0340), vect(p ## _IRQ11, 0x0360),	\
-	vect(p ## _IRQ12, 0x0380), vect(p ## _IRQ13, 0x03a0),	\
-	vect(p ## _IRQ14, 0x03c0), vect(p ## _IRQ15, 0x03e0)
-
-#define INTC_IRQ_PINS_VECT_16H(p, vect)				\
-	vect(p ## _IRQ16, 0x3200), vect(p ## _IRQ17, 0x3220),	\
-	vect(p ## _IRQ18, 0x3240), vect(p ## _IRQ19, 0x3260),	\
-	vect(p ## _IRQ20, 0x3280), vect(p ## _IRQ21, 0x32a0),	\
-	vect(p ## _IRQ22, 0x32c0), vect(p ## _IRQ23, 0x32e0),	\
-	vect(p ## _IRQ24, 0x3300), vect(p ## _IRQ25, 0x3320),	\
-	vect(p ## _IRQ26, 0x3340), vect(p ## _IRQ27, 0x3360),	\
-	vect(p ## _IRQ28, 0x3380), vect(p ## _IRQ29, 0x33a0),	\
-	vect(p ## _IRQ30, 0x33c0), vect(p ## _IRQ31, 0x33e0)
-
-#define INTC_IRQ_PINS_MASK_16L(p, base)					\
-	{ base + 0x40, base + 0x60, 8, /* INTMSK00A / INTMSKCLR00A */	\
-	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
-	{ base + 0x44, base + 0x64, 8, /* INTMSK10A / INTMSKCLR10A */	\
-	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
-	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_MASK_16H(p, base)					\
-	{ base + 0x48, base + 0x68, 8, /* INTMSK20A / INTMSKCLR20A */	\
-	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
-	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
-	{ base + 0x4c, base + 0x6c, 8, /* INTMSK30A / INTMSKCLR30A */	\
-	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
-	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_PRIO_16L(p, base)					\
-	{ base + 0x10, 0, 32, 4, /* INTPRI00A */			\
-	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
-	{ base + 0x14, 0, 32, 4, /* INTPRI10A */			\
-	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
-	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_PRIO_16H(p, base)					\
-	{ base + 0x18, 0, 32, 4, /* INTPRI20A */			\
-	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
-	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
-	{ base + 0x1c, 0, 32, 4, /* INTPRI30A */			\
-	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
-	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_SENSE_16L(p, base)				\
-	{ base + 0x00, 32, 4, /* ICR1A */				\
-	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
-	{ base + 0x04, 32, 4, /* ICR2A */				\
-	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
-	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_SENSE_16H(p, base)				\
-	{ base + 0x08, 32, 4, /* ICR3A */				\
-	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
-	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
-	{ base + 0x0c, 32, 4, /* ICR4A */				\
-	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
-	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_ACK_16L(p, base)					\
-	{ base + 0x20, 0, 8, /* INTREQ00A */				\
-	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
-	{ base + 0x24, 0, 8, /* INTREQ10A */				\
-	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
-	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_ACK_16H(p, base)					\
-	{ base + 0x28, 0, 8, /* INTREQ20A */				\
-	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
-	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
-	{ base + 0x2c, 0, 8, /* INTREQ30A */				\
-	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
-	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_16(p, base, vect, str)				\
-									\
-static struct resource p ## _resources[] __initdata = {			\
-	[0] = {								\
-		.start	= base,						\
-		.end	= base + 0x64,					\
-		.flags	= IORESOURCE_MEM,				\
-	},								\
-};									\
-									\
-enum {									\
-	p ## _UNUSED = 0,						\
-	INTC_IRQ_PINS_ENUM_16L(p),					\
-};									\
-									\
-static struct intc_vect p ## _vectors[] __initdata = {			\
-	INTC_IRQ_PINS_VECT_16L(p, vect),				\
-};									\
-									\
-static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
-	INTC_IRQ_PINS_MASK_16L(p, base),				\
-};									\
-									\
-static struct intc_prio_reg p ## _prio_registers[] __initdata = {	\
-	INTC_IRQ_PINS_PRIO_16L(p, base),				\
-};									\
-									\
-static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
-	INTC_IRQ_PINS_SENSE_16L(p, base),				\
-};									\
-									\
-static struct intc_mask_reg p ## _ack_registers[] __initdata = {	\
-	INTC_IRQ_PINS_ACK_16L(p, base),					\
-};									\
-									\
-static struct intc_desc p ## _desc __initdata = {			\
-	.name = str,							\
-	.resource = p ## _resources,					\
-	.num_resources = ARRAY_SIZE(p ## _resources),			\
-	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
-			     p ## _mask_registers, p ## _prio_registers, \
-			     p ## _sense_registers, p ## _ack_registers) \
-}
-
-#define INTC_IRQ_PINS_16H(p, base, vect, str)				\
-									\
-static struct resource p ## _resources[] __initdata = {			\
-	[0] = {								\
-		.start	= base,						\
-		.end	= base + 0x64,					\
-		.flags	= IORESOURCE_MEM,				\
-	},								\
-};									\
-									\
-enum {									\
-	p ## _UNUSED = 0,						\
-	INTC_IRQ_PINS_ENUM_16H(p),					\
-};									\
-									\
-static struct intc_vect p ## _vectors[] __initdata = {			\
-	INTC_IRQ_PINS_VECT_16H(p, vect),				\
-};									\
-									\
-static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
-	INTC_IRQ_PINS_MASK_16H(p, base),				\
-};									\
-									\
-static struct intc_prio_reg p ## _prio_registers[] __initdata = {	\
-	INTC_IRQ_PINS_PRIO_16H(p, base),				\
-};									\
-									\
-static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
-	INTC_IRQ_PINS_SENSE_16H(p, base),				\
-};									\
-									\
-static struct intc_mask_reg p ## _ack_registers[] __initdata = {	\
-	INTC_IRQ_PINS_ACK_16H(p, base),					\
-};									\
-									\
-static struct intc_desc p ## _desc __initdata = {			\
-	.name = str,							\
-	.resource = p ## _resources,					\
-	.num_resources = ARRAY_SIZE(p ## _resources),			\
-	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
-			     p ## _mask_registers, p ## _prio_registers, \
-			     p ## _sense_registers, p ## _ack_registers) \
-}
-
-#define INTC_IRQ_PINS_32(p, base, vect, str)				\
-									\
-static struct resource p ## _resources[] __initdata = {			\
-	[0] = {								\
-		.start	= base,						\
-		.end	= base + 0x6c,					\
-		.flags	= IORESOURCE_MEM,				\
-	},								\
-};									\
-									\
-enum {									\
-	p ## _UNUSED = 0,						\
-	INTC_IRQ_PINS_ENUM_16L(p),					\
-	INTC_IRQ_PINS_ENUM_16H(p),					\
-};									\
-									\
-static struct intc_vect p ## _vectors[] __initdata = {			\
-	INTC_IRQ_PINS_VECT_16L(p, vect),				\
-	INTC_IRQ_PINS_VECT_16H(p, vect),				\
-};									\
-									\
-static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
-	INTC_IRQ_PINS_MASK_16L(p, base),				\
-	INTC_IRQ_PINS_MASK_16H(p, base),				\
-};									\
-									\
-static struct intc_prio_reg p ## _prio_registers[] __initdata = {	\
-	INTC_IRQ_PINS_PRIO_16L(p, base),				\
-	INTC_IRQ_PINS_PRIO_16H(p, base),				\
-};									\
-									\
-static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
-	INTC_IRQ_PINS_SENSE_16L(p, base),				\
-	INTC_IRQ_PINS_SENSE_16H(p, base),				\
-};									\
-									\
-static struct intc_mask_reg p ## _ack_registers[] __initdata = {	\
-	INTC_IRQ_PINS_ACK_16L(p, base),					\
-	INTC_IRQ_PINS_ACK_16H(p, base),					\
-};									\
-									\
-static struct intc_desc p ## _desc __initdata = {			\
-	.name = str,							\
-	.resource = p ## _resources,					\
-	.num_resources = ARRAY_SIZE(p ## _resources),			\
-	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
-			     p ## _mask_registers, p ## _prio_registers, \
-			     p ## _sense_registers, p ## _ack_registers) \
-}
-
-#define INTC_PINT_E_EMPTY
-#define INTC_PINT_E_NONE 0, 0, 0, 0, 0, 0, 0, 0,
-#define INTC_PINT_E(p)							\
-	PINT ## p ## 0, PINT ## p ## 1, PINT ## p ## 2, PINT ## p ## 3,	\
-	PINT ## p ## 4, PINT ## p ## 5, PINT ## p ## 6, PINT ## p ## 7,
-
-#define INTC_PINT_V_NONE
-#define INTC_PINT_V(p, vect)					\
-	vect(PINT ## p ## 0, 0), vect(PINT ## p ## 1, 1),	\
-	vect(PINT ## p ## 2, 2), vect(PINT ## p ## 3, 3),	\
-	vect(PINT ## p ## 4, 4), vect(PINT ## p ## 5, 5),	\
-	vect(PINT ## p ## 6, 6), vect(PINT ## p ## 7, 7),
-
-#define INTC_PINT(p, mask_reg, sense_base, str,				\
-	enums_1, enums_2, enums_3, enums_4,				\
-	vect_1, vect_2, vect_3, vect_4,					\
-	mask_a, mask_b, mask_c, mask_d,					\
-	sense_a, sense_b, sense_c, sense_d)				\
-									\
-enum {									\
-	PINT ## p ## _UNUSED = 0,					\
-	enums_1 enums_2 enums_3 enums_4 				\
-};									\
-									\
-static struct intc_vect p ## _vectors[] __initdata = {			\
-	vect_1 vect_2 vect_3 vect_4					\
-};									\
-									\
-static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
-	{ mask_reg, 0, 32, /* PINTER */					\
-	  { mask_a mask_b mask_c mask_d } }				\
-};									\
-									\
-static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
-	{ sense_base + 0x00, 16, 2, /* PINTCR */			\
-	  { sense_a } },						\
-	{ sense_base + 0x04, 16, 2, /* PINTCR */			\
-	  { sense_b } },						\
-	{ sense_base + 0x08, 16, 2, /* PINTCR */			\
-	  { sense_c } },						\
-	{ sense_base + 0x0c, 16, 2, /* PINTCR */			\
-	  { sense_d } },						\
-};									\
-									\
-static struct intc_desc p ## _desc __initdata = {			\
-	.name = str,							\
-	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
-			     p ## _mask_registers, NULL,		\
-			     p ## _sense_registers, NULL),		\
-}
-
-/* INTCS */
-#define INTCS_VECT_BASE		0x3400
-#define INTCS_VECT(n, vect)	INTC_VECT((n), INTCS_VECT_BASE + (vect))
-#define intcs_evt2irq(evt)	evt2irq(INTCS_VECT_BASE + (evt))
-
-#endif  /* __ASM_MACH_INTC_H */
-- 
2.1.4

[PATCH 05/21] ARM: shmobile: Remove obsolete legacy PM Domain leftovers

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last users were removed in commit b587288001f05c0e ("ARM: shmobile:
R-Mobile: Remove legacy PM Domain code").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/pm-rmobile.h | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/arch/arm/mach-shmobile/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h
index 30a4a421ee31..8146bb6d7237 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.h
+++ b/arch/arm/mach-shmobile/pm-rmobile.h
@@ -12,10 +12,6 @@
 
 #include <linux/pm_domain.h>
 
-#define DEFAULT_DEV_LATENCY_NS	250000
-
-struct platform_device;
-
 struct rmobile_pm_domain {
 	struct generic_pm_domain genpd;
 	struct dev_power_governor *gov;
@@ -26,9 +22,4 @@ struct rmobile_pm_domain {
 	bool no_debug;
 };
 
-struct pm_domain_device {
-	const char *domain_name;
-	struct platform_device *pdev;
-};
-
 #endif /* PM_RMOBILE_H */
-- 
2.1.4

[PATCH 05/21] ARM: shmobile: Remove obsolete legacy PM Domain leftovers

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last users were removed in commit b587288001f05c0e ("ARM: shmobile:
R-Mobile: Remove legacy PM Domain code").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/pm-rmobile.h | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/arch/arm/mach-shmobile/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h
index 30a4a421ee31..8146bb6d7237 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.h
+++ b/arch/arm/mach-shmobile/pm-rmobile.h
@@ -12,10 +12,6 @@
 
 #include <linux/pm_domain.h>
 
-#define DEFAULT_DEV_LATENCY_NS	250000
-
-struct platform_device;
-
 struct rmobile_pm_domain {
 	struct generic_pm_domain genpd;
 	struct dev_power_governor *gov;
@@ -26,9 +22,4 @@ struct rmobile_pm_domain {
 	bool no_debug;
 };
 
-struct pm_domain_device {
-	const char *domain_name;
-	struct platform_device *pdev;
-};
-
 #endif /* PM_RMOBILE_H */
-- 
2.1.4

[PATCH 06/21] ARM: shmobile: Remove obsolete earlytimer registration

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last caller of shmobile_earlytimer_init() was removed in commit
c99cd90d98a98aa1 ("ARM: shmobile: r8a7779: Remove legacy SoC code").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/common.h |  1 -
 arch/arm/mach-shmobile/timer.c  | 21 ---------------------
 2 files changed, 22 deletions(-)

diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index ee8fe9e473d7..2a350b48b893 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -1,7 +1,6 @@
 #ifndef __ARCH_MACH_COMMON_H
 #define __ARCH_MACH_COMMON_H
 
-extern void shmobile_earlytimer_init(void);
 extern void shmobile_init_delay(void);
 struct twd_local_timer;
 extern void shmobile_boot_vector(void);
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index f1d027aa7a81..c17d4d3881ff 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -77,24 +77,3 @@ void __init shmobile_init_delay(void)
 			shmobile_setup_delay_hz(max_freq, 2, 4);
 	}
 }
-
-static void __init shmobile_late_time_init(void)
-{
-	/*
-	 * Make sure all compiled-in early timers register themselves.
-	 *
-	 * Run probe() for two "earlytimer" devices, these will be the
-	 * clockevents and clocksource devices respectively. In the event
-	 * that only a clockevents device is available, we -ENODEV on the
-	 * clocksource and the jiffies clocksource is used transparently
-	 * instead. No error handling is necessary here.
-	 */
-	early_platform_driver_register_all("earlytimer");
-	early_platform_driver_probe("earlytimer", 2, 0);
-}
-
-void __init shmobile_earlytimer_init(void)
-{
-	late_time_init = shmobile_late_time_init;
-}
-
-- 
2.1.4

[PATCH 06/21] ARM: shmobile: Remove obsolete earlytimer registration

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last caller of shmobile_earlytimer_init() was removed in commit
c99cd90d98a98aa1 ("ARM: shmobile: r8a7779: Remove legacy SoC code").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/common.h |  1 -
 arch/arm/mach-shmobile/timer.c  | 21 ---------------------
 2 files changed, 22 deletions(-)

diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index ee8fe9e473d7..2a350b48b893 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -1,7 +1,6 @@
 #ifndef __ARCH_MACH_COMMON_H
 #define __ARCH_MACH_COMMON_H
 
-extern void shmobile_earlytimer_init(void);
 extern void shmobile_init_delay(void);
 struct twd_local_timer;
 extern void shmobile_boot_vector(void);
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index f1d027aa7a81..c17d4d3881ff 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -77,24 +77,3 @@ void __init shmobile_init_delay(void)
 			shmobile_setup_delay_hz(max_freq, 2, 4);
 	}
 }
-
-static void __init shmobile_late_time_init(void)
-{
-	/*
-	 * Make sure all compiled-in early timers register themselves.
-	 *
-	 * Run probe() for two "earlytimer" devices, these will be the
-	 * clockevents and clocksource devices respectively. In the event
-	 * that only a clockevents device is available, we -ENODEV on the
-	 * clocksource and the jiffies clocksource is used transparently
-	 * instead. No error handling is necessary here.
-	 */
-	early_platform_driver_register_all("earlytimer");
-	early_platform_driver_probe("earlytimer", 2, 0);
-}
-
-void __init shmobile_earlytimer_init(void)
-{
-	late_time_init = shmobile_late_time_init;
-}
-
-- 
2.1.4

[PATCH 07/21] ARM: shmobile: Remove obsolete twd_local_timer declaration

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last user of twd_local_timer was removed in commit c99cd90d98a98aa1
("ARM: shmobile: r8a7779: Remove legacy SoC code").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/common.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index 2a350b48b893..0833a6ed02e4 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -2,7 +2,6 @@
 #define __ARCH_MACH_COMMON_H
 
 extern void shmobile_init_delay(void);
-struct twd_local_timer;
 extern void shmobile_boot_vector(void);
 extern unsigned long shmobile_boot_fn;
 extern unsigned long shmobile_boot_arg;
-- 
2.1.4

[PATCH 07/21] ARM: shmobile: Remove obsolete twd_local_timer declaration

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The last user of twd_local_timer was removed in commit c99cd90d98a98aa1
("ARM: shmobile: r8a7779: Remove legacy SoC code").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/common.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index 2a350b48b893..0833a6ed02e4 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -2,7 +2,6 @@
 #define __ARCH_MACH_COMMON_H
 
 extern void shmobile_init_delay(void);
-struct twd_local_timer;
 extern void shmobile_boot_vector(void);
 extern unsigned long shmobile_boot_fn;
 extern unsigned long shmobile_boot_arg;
-- 
2.1.4

[PATCH 08/21] ARM: shmobile: bockw: remove "reference" device tree

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Replaced by multi-platform.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 Documentation/devicetree/bindings/arm/shmobile.txt |   2 -
 arch/arm/boot/dts/Makefile                         |   3 +-
 arch/arm/boot/dts/r8a7778-bockw-reference.dts      | 139 ---------------------
 3 files changed, 1 insertion(+), 143 deletions(-)
 delete mode 100644 arch/arm/boot/dts/r8a7778-bockw-reference.dts

diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index c4f19b2e7dd9..eed7eb78a22e 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -39,8 +39,6 @@ Boards:
     compatible = "renesas,armadillo800eva"
   - BOCK-W
     compatible = "renesas,bockw", "renesas,r8a7778"
-  - BOCK-W - Reference Device Tree Implementation
-    compatible = "renesas,bockw-reference", "renesas,r8a7778"
   - Genmai (RTK772100BC00000BR)
     compatible = "renesas,genmai", "renesas,r7s72100"
   - Gose
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 233159d2eaab..ad74cf99bc1f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -523,8 +523,7 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
 	s5pv210-smdkv210.dtb \
 	s5pv210-torbreck.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
-	r8a7778-bockw.dtb \
-	r8a7778-bockw-reference.dtb
+	r8a7778-bockw.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	emev2-kzm9d.dtb \
 	r7s72100-genmai.dtb \
diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
deleted file mode 100644
index dffa6ff30360..000000000000
--- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Reference Device Tree Source for the Bock-W board
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on r8a7779
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7778.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "bockw";
-	compatible = "renesas,bockw-reference", "renesas,r8a7778";
-
-	aliases {
-		serial0 = &scif0;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
-		stdout-path = &scif0;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x60000000 0x10000000>;
-	};
-
-	fixedregulator3v3: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	ethernet@18300000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
-		reg = <0x18300000 0x1000>;
-
-		phy-mode = "mii";
-		interrupt-parent = <&irqpin>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-		reg-io-width = <4>;
-		vddvario-supply = <&fixedregulator3v3>;
-		vdd33a-supply = <&fixedregulator3v3>;
-	};
-
-};
-
-&mmcif {
-	pinctrl-0 = <&mmc_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <8>;
-	broken-cd;
-	status = "okay";
-};
-
-&irqpin {
-	status = "okay";
-};
-
-&tmu0 {
-	status = "okay";
-};
-
-&pfc {
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_a", "scif0_ctrl";
-		renesas,function = "scif0";
-	};
-
-	mmc_pins: mmc {
-		renesas,groups = "mmc_data8", "mmc_ctrl";
-		renesas,function = "mmc";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
-				  "sdhi0_cd";
-		renesas,function = "sdhi0";
-	};
-
-	hspi0_pins: hspi0 {
-		renesas,groups = "hspi0_a";
-		renesas,function = "hspi0";
-	};
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <4>;
-	status = "okay";
-	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
-};
-
-&hspi0 {
-	pinctrl-0 = <&hspi0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl008k", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <104000000>;
-		m25p,fast-read;
-
-		partition@0 {
-			label = "data(spi)";
-			reg = <0x00000000 0x00100000>;
-		};
-	};
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-- 
2.1.4

[PATCH 08/21] ARM: shmobile: bockw: remove "reference" device tree

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Replaced by multi-platform.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 Documentation/devicetree/bindings/arm/shmobile.txt |   2 -
 arch/arm/boot/dts/Makefile                         |   3 +-
 arch/arm/boot/dts/r8a7778-bockw-reference.dts      | 139 ---------------------
 3 files changed, 1 insertion(+), 143 deletions(-)
 delete mode 100644 arch/arm/boot/dts/r8a7778-bockw-reference.dts

diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index c4f19b2e7dd9..eed7eb78a22e 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -39,8 +39,6 @@ Boards:
     compatible = "renesas,armadillo800eva"
   - BOCK-W
     compatible = "renesas,bockw", "renesas,r8a7778"
-  - BOCK-W - Reference Device Tree Implementation
-    compatible = "renesas,bockw-reference", "renesas,r8a7778"
   - Genmai (RTK772100BC00000BR)
     compatible = "renesas,genmai", "renesas,r7s72100"
   - Gose
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 233159d2eaab..ad74cf99bc1f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -523,8 +523,7 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
 	s5pv210-smdkv210.dtb \
 	s5pv210-torbreck.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
-	r8a7778-bockw.dtb \
-	r8a7778-bockw-reference.dtb
+	r8a7778-bockw.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	emev2-kzm9d.dtb \
 	r7s72100-genmai.dtb \
diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
deleted file mode 100644
index dffa6ff30360..000000000000
--- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Reference Device Tree Source for the Bock-W board
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on r8a7779
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7778.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "bockw";
-	compatible = "renesas,bockw-reference", "renesas,r8a7778";
-
-	aliases {
-		serial0 = &scif0;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
-		stdout-path = &scif0;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x60000000 0x10000000>;
-	};
-
-	fixedregulator3v3: fixedregulator at 0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	ethernet at 18300000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
-		reg = <0x18300000 0x1000>;
-
-		phy-mode = "mii";
-		interrupt-parent = <&irqpin>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-		reg-io-width = <4>;
-		vddvario-supply = <&fixedregulator3v3>;
-		vdd33a-supply = <&fixedregulator3v3>;
-	};
-
-};
-
-&mmcif {
-	pinctrl-0 = <&mmc_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <8>;
-	broken-cd;
-	status = "okay";
-};
-
-&irqpin {
-	status = "okay";
-};
-
-&tmu0 {
-	status = "okay";
-};
-
-&pfc {
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_a", "scif0_ctrl";
-		renesas,function = "scif0";
-	};
-
-	mmc_pins: mmc {
-		renesas,groups = "mmc_data8", "mmc_ctrl";
-		renesas,function = "mmc";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
-				  "sdhi0_cd";
-		renesas,function = "sdhi0";
-	};
-
-	hspi0_pins: hspi0 {
-		renesas,groups = "hspi0_a";
-		renesas,function = "hspi0";
-	};
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <4>;
-	status = "okay";
-	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
-};
-
-&hspi0 {
-	pinctrl-0 = <&hspi0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash: flash at 0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl008k", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <104000000>;
-		m25p,fast-read;
-
-		partition at 0 {
-			label = "data(spi)";
-			reg = <0x00000000 0x00100000>;
-		};
-	};
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-- 
2.1.4

[PATCH 09/21] ARM: shmobile: bockw: remove "reference" board file and config

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Replaced by multi-platform.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig                 | 13 ----
 arch/arm/mach-shmobile/Makefile                |  1 -
 arch/arm/mach-shmobile/Makefile.boot           |  1 -
 arch/arm/mach-shmobile/board-bockw-reference.c | 86 --------------------------
 4 files changed, 101 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/board-bockw-reference.c

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 926e336d6aeb..670dce3953d0 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -126,19 +126,6 @@ config MACH_BOCKW
 	select SND_SOC_AK4642 if SND_SIMPLE_CARD && I2C
 	select USE_OF
 
-config MACH_BOCKW_REFERENCE
-	bool "BOCK-W  - Reference Device Tree Implementation"
-	depends on ARCH_R8A7778
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select USE_OF
-	---help---
-	   Use reference implementation of BockW board support
-	   which makes use of device tree at the expense
-	   of not supporting a number of devices.
-
-	   This is intended to aid developers
-
 comment "Renesas ARM SoCs System Configuration"
 
 config CPU_HAS_INTEVT
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index b02841528e05..8f235c5ec28d 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -52,7 +52,6 @@ obj-$(CONFIG_ARCH_RCAR_GEN2)	+= pm-rcar-gen2.o
 # Board objects
 ifndef CONFIG_ARCH_SHMOBILE_MULTI
 obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
-obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
 endif
 
 # Framework support
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index a489fe9a76cd..1a4ab160e361 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -1,7 +1,6 @@
 # per-board load address for uImage
 loadaddr-y	: loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
-loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
 
 __ZRELADDR	:= $(sort $(loadaddr-y))
    zreladdr-y   += $(__ZRELADDR)
diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c
deleted file mode 100644
index 4f78296f7d04..000000000000
--- a/arch/arm/mach-shmobile/board-bockw-reference.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Bock-W board support
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "r8a7778.h"
-
-/*
- *	see board-bock.c for checking detail of dip-switch
- */
-
-#define FPGA	0x18200000
-#define IRQ0MR	0x30
-#define COMCTLR	0x101c
-
-#define PFC	0xfffc0000
-#define PUPR4	0x110
-static void __init bockw_init(void)
-{
-	void __iomem *fpga;
-	void __iomem *pfc;
-
-#ifndef CONFIG_COMMON_CLK
-	r8a7778_clock_init();
-#endif
-	r8a7778_init_irq_extpin_dt(1);
-	r8a7778_add_dt_devices();
-
-	fpga = ioremap_nocache(FPGA, SZ_1M);
-	if (fpga) {
-		/*
-		 * CAUTION
-		 *
-		 * IRQ0/1 is cascaded interrupt from FPGA.
-		 * it should be cared in the future
-		 * Now, it is assuming IRQ0 was used only from SMSC.
-		 */
-		u16 val = ioread16(fpga + IRQ0MR);
-		val &= ~(1 << 4); /* enable SMSC911x */
-		iowrite16(val, fpga + IRQ0MR);
-
-		iounmap(fpga);
-	}
-
-	pfc = ioremap_nocache(PFC, 0x200);
-	if (pfc) {
-		/*
-		 * FIXME
-		 *
-		 * SDHI CD/WP pin needs pull-up
-		 */
-		iowrite32(ioread32(pfc + PUPR4) | (3 << 26), pfc + PUPR4);
-		iounmap(pfc);
-	}
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *const bockw_boards_compat_dt[] __initconst = {
-	"renesas,bockw-reference",
-	NULL,
-};
-
-DT_MACHINE_START(BOCKW_DT, "bockw")
-	.init_early	= shmobile_init_delay,
-	.init_irq	= r8a7778_init_irq_dt,
-	.init_machine	= bockw_init,
-	.init_late	= shmobile_init_late,
-	.dt_compat	= bockw_boards_compat_dt,
-MACHINE_END
-- 
2.1.4

[PATCH 09/21] ARM: shmobile: bockw: remove "reference" board file and config

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Replaced by multi-platform.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig                 | 13 ----
 arch/arm/mach-shmobile/Makefile                |  1 -
 arch/arm/mach-shmobile/Makefile.boot           |  1 -
 arch/arm/mach-shmobile/board-bockw-reference.c | 86 --------------------------
 4 files changed, 101 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/board-bockw-reference.c

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 926e336d6aeb..670dce3953d0 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -126,19 +126,6 @@ config MACH_BOCKW
 	select SND_SOC_AK4642 if SND_SIMPLE_CARD && I2C
 	select USE_OF
 
-config MACH_BOCKW_REFERENCE
-	bool "BOCK-W  - Reference Device Tree Implementation"
-	depends on ARCH_R8A7778
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select USE_OF
-	---help---
-	   Use reference implementation of BockW board support
-	   which makes use of device tree at the expense
-	   of not supporting a number of devices.
-
-	   This is intended to aid developers
-
 comment "Renesas ARM SoCs System Configuration"
 
 config CPU_HAS_INTEVT
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index b02841528e05..8f235c5ec28d 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -52,7 +52,6 @@ obj-$(CONFIG_ARCH_RCAR_GEN2)	+= pm-rcar-gen2.o
 # Board objects
 ifndef CONFIG_ARCH_SHMOBILE_MULTI
 obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
-obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
 endif
 
 # Framework support
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index a489fe9a76cd..1a4ab160e361 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -1,7 +1,6 @@
 # per-board load address for uImage
 loadaddr-y	:=
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
-loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
 
 __ZRELADDR	:= $(sort $(loadaddr-y))
    zreladdr-y   += $(__ZRELADDR)
diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c
deleted file mode 100644
index 4f78296f7d04..000000000000
--- a/arch/arm/mach-shmobile/board-bockw-reference.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Bock-W board support
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "r8a7778.h"
-
-/*
- *	see board-bock.c for checking detail of dip-switch
- */
-
-#define FPGA	0x18200000
-#define IRQ0MR	0x30
-#define COMCTLR	0x101c
-
-#define PFC	0xfffc0000
-#define PUPR4	0x110
-static void __init bockw_init(void)
-{
-	void __iomem *fpga;
-	void __iomem *pfc;
-
-#ifndef CONFIG_COMMON_CLK
-	r8a7778_clock_init();
-#endif
-	r8a7778_init_irq_extpin_dt(1);
-	r8a7778_add_dt_devices();
-
-	fpga = ioremap_nocache(FPGA, SZ_1M);
-	if (fpga) {
-		/*
-		 * CAUTION
-		 *
-		 * IRQ0/1 is cascaded interrupt from FPGA.
-		 * it should be cared in the future
-		 * Now, it is assuming IRQ0 was used only from SMSC.
-		 */
-		u16 val = ioread16(fpga + IRQ0MR);
-		val &= ~(1 << 4); /* enable SMSC911x */
-		iowrite16(val, fpga + IRQ0MR);
-
-		iounmap(fpga);
-	}
-
-	pfc = ioremap_nocache(PFC, 0x200);
-	if (pfc) {
-		/*
-		 * FIXME
-		 *
-		 * SDHI CD/WP pin needs pull-up
-		 */
-		iowrite32(ioread32(pfc + PUPR4) | (3 << 26), pfc + PUPR4);
-		iounmap(pfc);
-	}
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *const bockw_boards_compat_dt[] __initconst = {
-	"renesas,bockw-reference",
-	NULL,
-};
-
-DT_MACHINE_START(BOCKW_DT, "bockw")
-	.init_early	= shmobile_init_delay,
-	.init_irq	= r8a7778_init_irq_dt,
-	.init_machine	= bockw_init,
-	.init_late	= shmobile_init_late,
-	.dt_compat	= bockw_boards_compat_dt,
-MACHINE_END
-- 
2.1.4

[PATCH 10/21] ARM: shmobile: remove paragraph on DT reference platforms

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

They have all been eliminated now.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 Documentation/devicetree/bindings/arm/shmobile.txt | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index eed7eb78a22e..2b9cb62838f2 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -55,7 +55,3 @@ Boards:
     compatible = "renesas,lager", "renesas,r8a7790"
   - Marzen
     compatible = "renesas,marzen", "renesas,r8a7779"
-
-Note: Reference Device Tree Implementations are temporary implementations
-      to ease the migration from platform devices to Device Tree, and are
-      intended to be removed in the future.
-- 
2.1.4

[PATCH 10/21] ARM: shmobile: remove paragraph on DT reference platforms

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

They have all been eliminated now.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 Documentation/devicetree/bindings/arm/shmobile.txt | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index eed7eb78a22e..2b9cb62838f2 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -55,7 +55,3 @@ Boards:
     compatible = "renesas,lager", "renesas,r8a7790"
   - Marzen
     compatible = "renesas,marzen", "renesas,r8a7779"
-
-Note: Reference Device Tree Implementations are temporary implementations
-      to ease the migration from platform devices to Device Tree, and are
-      intended to be removed in the future.
-- 
2.1.4

[PATCH 11/21] ARM: shmobile: bockw: remove legacy board file and config

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Replaced by multi-platform.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig       |  11 -
 arch/arm/mach-shmobile/Makefile      |   5 -
 arch/arm/mach-shmobile/Makefile.boot |  11 -
 arch/arm/mach-shmobile/board-bockw.c | 737 -----------------------------------
 4 files changed, 764 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/board-bockw.c

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 670dce3953d0..6e07e981c8ff 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -115,17 +115,6 @@ config ARCH_R8A7779
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 
-comment "Renesas ARM SoCs Board Type"
-
-config MACH_BOCKW
-	bool "BOCK-W platform"
-	depends on ARCH_R8A7778
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SND_SOC_AK4554 if SND_SIMPLE_CARD
-	select SND_SOC_AK4642 if SND_SIMPLE_CARD && I2C
-	select USE_OF
-
 comment "Renesas ARM SoCs System Configuration"
 
 config CPU_HAS_INTEVT
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 8f235c5ec28d..5392925e15f1 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -49,10 +49,5 @@ obj-$(CONFIG_PM_RCAR)		+= pm-rcar.o
 obj-$(CONFIG_PM_RMOBILE)	+= pm-rmobile.o
 obj-$(CONFIG_ARCH_RCAR_GEN2)	+= pm-rcar-gen2.o
 
-# Board objects
-ifndef CONFIG_ARCH_SHMOBILE_MULTI
-obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
-endif
-
 # Framework support
 obj-$(CONFIG_SMP)		+= $(smp-y)
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 1a4ab160e361..e69de29bb2d1 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -1,11 +0,0 @@
-# per-board load address for uImage
-loadaddr-y	:-loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
-
-__ZRELADDR	:= $(sort $(loadaddr-y))
-   zreladdr-y   += $(__ZRELADDR)
-
-# Unsupported legacy stuff
-#
-#params_phys-y (Instead: Pass atags pointer in r2)
-#initrd_phys-y (Instead: Use compiled-in initramfs)
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
deleted file mode 100644
index 25a0e7233fe4..000000000000
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ /dev/null
@@ -1,737 +0,0 @@
-/*
- * Bock-W board support
- *
- * Copyright (C) 2013-2014  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Copyright (C) 2013-2014  Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mtd/partitions.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_data/camera-rcar.h>
-#include <linux/platform_data/usb-rcar-phy.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/usb/renesas_usbhs.h>
-
-#include <media/soc_camera.h>
-#include <asm/mach/arch.h>
-#include <sound/rcar_snd.h>
-#include <sound/simple_card.h>
-
-#include "common.h"
-#include "irqs.h"
-#include "r8a7778.h"
-
-#define FPGA	0x18200000
-#define IRQ0MR	0x30
-#define COMCTLR	0x101c
-static void __iomem *fpga;
-
-/*
- *	CN9(Upper side) SCIF/RCAN selection
- *
- *		1,4	3,6
- * SW40		SCIF	RCAN
- * SW41		SCIF	RCAN
- */
-
-/*
- * MMC (CN26) pin
- *
- * SW6	(D2)	3 pin
- * SW7	(D5)	ON
- * SW8	(D3)	3 pin
- * SW10	(D4)	1 pin
- * SW12	(CLK)	1 pin
- * SW13	(D6)	3 pin
- * SW14	(CMD)	ON
- * SW15	(D6)	1 pin
- * SW16	(D0)	ON
- * SW17	(D1)	ON
- * SW18	(D7)	3 pin
- * SW19	(MMC)	1 pin
- */
-
-/*
- *	SSI settings
- *
- * SW45: 1-4 side	(SSI5 out, ROUT/LOUT CN19 Mid)
- * SW46: 1101		(SSI6 Recorde)
- * SW47: 1110		(SSI5 Playback)
- * SW48: 11		(Recorde power)
- * SW49: 1		(SSI slave mode)
- * SW50: 1111		(SSI7, SSI8)
- * SW51: 1111		(SSI3, SSI4)
- * SW54: 1pin		(ak4554 FPGA control)
- * SW55: 1		(CLKB is 24.5760MHz)
- * SW60: 1pin		(ak4554 FPGA control)
- * SW61: 3pin		(use X11 clock)
- * SW78: 3-6		(ak4642 connects I2C0)
- *
- * You can use sound as
- *
- * hw0: CN19: SSI56-AK4643
- * hw1: CN21: SSI3-AK4554(playback)
- * hw2: CN21: SSI4-AK4554(capture)
- * hw3: CN20: SSI7-AK4554(playback)
- * hw4: CN20: SSI8-AK4554(capture)
- *
- * this command is required when playback on hw0.
- *
- * # amixer set "LINEOUT Mixer DACL" on
- */
-
-/*
- * USB
- *
- * USB1 (CN29) can be Host/Function
- *
- *		Host	Func
- * SW98		1	2
- * SW99		1	3
- */
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "sh_mmcif"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mmcif"),
-};
-
-static struct smsc911x_platform_config smsc911x_data __initdata = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_32BIT,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource smsc911x_resources[] __initdata = {
-	DEFINE_RES_MEM(0x18300000, 0x1000),
-	DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
-};
-
-#if IS_ENABLED(CONFIG_USB_RENESAS_USBHS_UDC)
-/*
- * When USB1 is Func
- */
-static int usbhsf_get_id(struct platform_device *pdev)
-{
-	return USBHS_GADGET;
-}
-
-#define SUSPMODE	0x102
-static int usbhsf_power_ctrl(struct platform_device *pdev,
-			     void __iomem *base, int enable)
-{
-	enable = !!enable;
-
-	r8a7778_usb_phy_power(enable);
-
-	iowrite16(enable << 14, base + SUSPMODE);
-
-	return 0;
-}
-
-static struct resource usbhsf_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe60000, 0x110),
-	DEFINE_RES_IRQ(gic_iid(0x4f)),
-};
-
-static struct renesas_usbhs_platform_info usbhs_info __initdata = {
-	.platform_callback = {
-		.get_id		= usbhsf_get_id,
-		.power_ctrl	= usbhsf_power_ctrl,
-	},
-	.driver_param = {
-		.buswait_bwait	= 4,
-		.d0_tx_id	= HPBDMA_SLAVE_USBFUNC_TX,
-		.d1_rx_id	= HPBDMA_SLAVE_USBFUNC_RX,
-	},
-};
-
-#define USB_PHY_SETTING {.port1_func = 1, .ovc_pin[1].active_high = 1,}
-#define USB1_DEVICE	"renesas_usbhs"
-#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE()			\
-	platform_device_register_resndata(			\
-		NULL, "renesas_usbhs", -1,			\
-		usbhsf_resources,				\
-		ARRAY_SIZE(usbhsf_resources),			\
-		&usbhs_info, sizeof(struct renesas_usbhs_platform_info))
-
-#else
-/*
- * When USB1 is Host
- */
-#define USB_PHY_SETTING { }
-#define USB1_DEVICE	"ehci-platform"
-#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE()
-
-#endif
-
-/* USB */
-static struct resource usb_phy_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe70800, 0x100),
-	DEFINE_RES_MEM(0xffe76000, 0x100),
-};
-
-static struct rcar_phy_platform_data usb_phy_platform_data __initdata -	USB_PHY_SETTING;
-
-
-/* SDHI */
-static struct tmio_mmc_data sdhi0_info __initdata = {
-	.chan_priv_tx	= (void *)HPBDMA_SLAVE_SDHI0_TX,
-	.chan_priv_rx	= (void *)HPBDMA_SLAVE_SDHI0_RX,
-	.capabilities	= MMC_CAP_SD_HIGHSPEED,
-	.ocr_mask	= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
-	.flags		= TMIO_MMC_HAS_IDLE_WAIT,
-};
-
-static struct resource sdhi0_resources[] __initdata = {
-	DEFINE_RES_MEM(0xFFE4C000, 0x100),
-	DEFINE_RES_IRQ(gic_iid(0x77)),
-};
-
-/* Ether */
-static struct resource ether_resources[] __initdata = {
-	DEFINE_RES_MEM(0xfde00000, 0x400),
-	DEFINE_RES_IRQ(gic_iid(0x89)),
-};
-
-static struct sh_eth_plat_data ether_platform_data __initdata = {
-	.phy		= 0x01,
-	.edmac_endian	= EDMAC_LITTLE_ENDIAN,
-	.phy_interface	= PHY_INTERFACE_MODE_RMII,
-	/*
-	 * Although the LINK signal is available on the board, it's connected to
-	 * the link/activity LED output of the PHY, thus the link disappears and
-	 * reappears after each packet.  We'd be better off ignoring such signal
-	 * and getting the link state from the PHY indirectly.
-	 */
-	.no_ether_link	= 1,
-};
-
-static struct platform_device_info ether_info __initdata = {
-	.name		= "r8a777x-ether",
-	.id		= -1,
-	.res		= ether_resources,
-	.num_res	= ARRAY_SIZE(ether_resources),
-	.data		= &ether_platform_data,
-	.size_data	= sizeof(ether_platform_data),
-	.dma_mask	= DMA_BIT_MASK(32),
-};
-
-/* I2C */
-static struct i2c_board_info i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("rx8581", 0x51),
-	}, {
-		I2C_BOARD_INFO("ak4643", 0x12),
-	}
-};
-
-/* HSPI*/
-static struct mtd_partition m25p80_spi_flash_partitions[] = {
-	{
-		.name	= "data(spi)",
-		.size	= 0x0100000,
-		.offset	= 0,
-	},
-};
-
-static struct flash_platform_data spi_flash_data = {
-	.name		= "m25p80",
-	.type		= "s25fl008k",
-	.parts		= m25p80_spi_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(m25p80_spi_flash_partitions),
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias	= "m25p80",
-		.max_speed_hz	= 104000000,
-		.chip_select	= 0,
-		.bus_num	= 0,
-		.mode		= SPI_MODE_0,
-		.platform_data	= &spi_flash_data,
-	},
-};
-
-/* MMC */
-static struct resource mmc_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe4e000, 0x100),
-	DEFINE_RES_IRQ(gic_iid(0x5d)),
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_plat __initdata = {
-	.sup_pclk	= 0,
-	.caps		= MMC_CAP_4_BIT_DATA |
-			  MMC_CAP_8_BIT_DATA |
-			  MMC_CAP_NEEDS_POLL,
-};
-
-/* In the default configuration both decoders reside on I2C bus 0 */
-#define BOCKW_CAMERA(idx)						\
-static struct i2c_board_info camera##idx##_info = {			\
-	I2C_BOARD_INFO("ml86v7667", 0x41 + 2 * (idx)),			\
-};									\
-									\
-static struct soc_camera_link iclink##idx##_ml86v7667 __initdata = {	\
-	.bus_id		= idx,						\
-	.i2c_adapter_id	= 0,						\
-	.board_info	= &camera##idx##_info,				\
-}
-
-BOCKW_CAMERA(0);
-BOCKW_CAMERA(1);
-
-/* VIN */
-static struct rcar_vin_platform_data vin_platform_data __initdata = {
-	.flags	= RCAR_VIN_BT656,
-};
-
-#define R8A7778_VIN(idx)						\
-static struct resource vin##idx##_resources[] __initdata = {		\
-	DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000),		\
-	DEFINE_RES_IRQ(gic_iid(0x5a)),					\
-};									\
-									\
-static struct platform_device_info vin##idx##_info __initdata = {	\
-	.name		= "r8a7778-vin",				\
-	.id		= idx,						\
-	.res		= vin##idx##_resources,				\
-	.num_res	= ARRAY_SIZE(vin##idx##_resources),		\
-	.dma_mask	= DMA_BIT_MASK(32),				\
-	.data		= &vin_platform_data,				\
-	.size_data	= sizeof(vin_platform_data),			\
-}
-R8A7778_VIN(0);
-R8A7778_VIN(1);
-
-/* Sound */
-static struct resource rsnd_resources[] __initdata = {
-	[RSND_GEN1_SRU] = DEFINE_RES_MEM(0xffd90000, 0x1000),
-	[RSND_GEN1_SSI] = DEFINE_RES_MEM(0xffd91000, 0x1240),
-	[RSND_GEN1_ADG] = DEFINE_RES_MEM(0xfffe0000, 0x24),
-};
-
-static struct rsnd_ssi_platform_info rsnd_ssi[] = {
-	RSND_SSI_UNUSED, /* SSI 0 */
-	RSND_SSI_UNUSED, /* SSI 1 */
-	RSND_SSI_UNUSED, /* SSI 2 */
-	RSND_SSI(HPBDMA_SLAVE_HPBIF3_TX, gic_iid(0x85), 0),
-	RSND_SSI(HPBDMA_SLAVE_HPBIF4_RX, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE),
-	RSND_SSI(HPBDMA_SLAVE_HPBIF5_TX, gic_iid(0x86), 0),
-	RSND_SSI(HPBDMA_SLAVE_HPBIF6_RX, gic_iid(0x86), 0),
-	RSND_SSI(HPBDMA_SLAVE_HPBIF7_TX, gic_iid(0x86), 0),
-	RSND_SSI(HPBDMA_SLAVE_HPBIF8_RX, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE),
-};
-
-static struct rsnd_src_platform_info rsnd_src[9] = {
-	RSND_SRC_UNUSED, /* SRU 0 */
-	RSND_SRC_UNUSED, /* SRU 1 */
-	RSND_SRC_UNUSED, /* SRU 2 */
-	RSND_SRC(0, 0),
-	RSND_SRC(0, 0),
-	RSND_SRC(0, 0),
-	RSND_SRC(0, 0),
-	RSND_SRC(0, 0),
-	RSND_SRC(0, 0),
-};
-
-static struct rsnd_dai_platform_info rsnd_dai[] = {
-	{
-		.playback = { .ssi = &rsnd_ssi[5], .src = &rsnd_src[5] },
-		.capture  = { .ssi = &rsnd_ssi[6], .src = &rsnd_src[6] },
-	}, {
-		.playback = { .ssi = &rsnd_ssi[3], .src = &rsnd_src[3] },
-	}, {
-		.capture  = { .ssi = &rsnd_ssi[4], .src = &rsnd_src[4] },
-	}, {
-		.playback = { .ssi = &rsnd_ssi[7], .src = &rsnd_src[7] },
-	}, {
-		.capture  = { .ssi = &rsnd_ssi[8], .src = &rsnd_src[8] },
-	},
-};
-
-enum {
-	AK4554_34 = 0,
-	AK4643_56,
-	AK4554_78,
-	SOUND_MAX,
-};
-
-static int rsnd_codec_power(int id, int enable)
-{
-	static int sound_user[SOUND_MAX] = {0, 0, 0};
-	int *usr = NULL;
-	u32 bit;
-
-	switch (id) {
-	case 3:
-	case 4:
-		usr = sound_user + AK4554_34;
-		bit = (1 << 10);
-		break;
-	case 5:
-	case 6:
-		usr = sound_user + AK4643_56;
-		bit = (1 << 6);
-		break;
-	case 7:
-	case 8:
-		usr = sound_user + AK4554_78;
-		bit = (1 << 7);
-		break;
-	}
-
-	if (!usr)
-		return -EIO;
-
-	if (enable) {
-		if (*usr = 0) {
-			u32 val = ioread16(fpga + COMCTLR);
-			val &= ~bit;
-			iowrite16(val, fpga + COMCTLR);
-		}
-
-		(*usr)++;
-	} else {
-		if (*usr = 0)
-			return 0;
-
-		(*usr)--;
-
-		if (*usr = 0) {
-			u32 val = ioread16(fpga + COMCTLR);
-			val |= bit;
-			iowrite16(val, fpga + COMCTLR);
-		}
-	}
-
-	return 0;
-}
-
-static int rsnd_start(int id)
-{
-	return rsnd_codec_power(id, 1);
-}
-
-static int rsnd_stop(int id)
-{
-	return rsnd_codec_power(id, 0);
-}
-
-static struct rcar_snd_info rsnd_info = {
-	.flags		= RSND_GEN1,
-	.ssi_info	= rsnd_ssi,
-	.ssi_info_nr	= ARRAY_SIZE(rsnd_ssi),
-	.src_info	= rsnd_src,
-	.src_info_nr	= ARRAY_SIZE(rsnd_src),
-	.dai_info	= rsnd_dai,
-	.dai_info_nr	= ARRAY_SIZE(rsnd_dai),
-	.start		= rsnd_start,
-	.stop		= rsnd_stop,
-};
-
-static struct asoc_simple_card_info rsnd_card_info[] = {
-	/* SSI5, SSI6 */
-	{
-		.name		= "AK4643",
-		.card		= "SSI56-AK4643",
-		.codec		= "ak4642-codec.0-0012",
-		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
-		.cpu_dai = {
-			.name	= "rsnd-dai.0",
-		},
-		.codec_dai = {
-			.name	= "ak4642-hifi",
-			.sysclk	= 11289600,
-		},
-	},
-	/* SSI3 */
-	{
-		.name		= "AK4554",
-		.card		= "SSI3-AK4554(playback)",
-		.codec		= "ak4554-adc-dac.0",
-		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J,
-		.cpu_dai = {
-			.name	= "rsnd-dai.1",
-		},
-		.codec_dai = {
-			.name	= "ak4554-hifi",
-		},
-	},
-	/* SSI4 */
-	{
-		.name		= "AK4554",
-		.card		= "SSI4-AK4554(capture)",
-		.codec		= "ak4554-adc-dac.0",
-		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J,
-		.cpu_dai = {
-			.name	= "rsnd-dai.2",
-		},
-		.codec_dai = {
-			.name	= "ak4554-hifi",
-		},
-	},
-	/* SSI7 */
-	{
-		.name		= "AK4554",
-		.card		= "SSI7-AK4554(playback)",
-		.codec		= "ak4554-adc-dac.1",
-		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J,
-		.cpu_dai = {
-			.name	= "rsnd-dai.3",
-		},
-		.codec_dai = {
-			.name	= "ak4554-hifi",
-		},
-	},
-	/* SSI8 */
-	{
-		.name		= "AK4554",
-		.card		= "SSI8-AK4554(capture)",
-		.codec		= "ak4554-adc-dac.1",
-		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J,
-		.cpu_dai = {
-			.name	= "rsnd-dai.4",
-		},
-		.codec_dai = {
-			.name	= "ak4554-hifi",
-		},
-	}
-};
-
-static const struct pinctrl_map bockw_pinctrl_map[] = {
-	/* AUDIO */
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "audio_clk_a", "audio_clk"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "audio_clk_b", "audio_clk"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi34_ctrl", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi3_data", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi4_data", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi5_ctrl", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi5_data", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi6_ctrl", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi6_data", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi78_ctrl", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi7_data", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi8_data", "ssi"),
-	/* Ether */
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778",
-				  "ether_rmii", "ether"),
-	/* HSPI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7778",
-				  "hspi0_a", "hspi0"),
-	/* MMC */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
-				  "mmc_data8", "mmc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
-				  "mmc_ctrl", "mmc"),
-	/* SCIF0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
-				  "scif0_data_a", "scif0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
-				  "scif0_ctrl", "scif0"),
-	/* USB */
-	PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778",
-				  "usb0", "usb0"),
-	PIN_MAP_MUX_GROUP_DEFAULT(USB1_DEVICE, "pfc-r8a7778",
-				  "usb1", "usb1"),
-	/* SDHI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
-				  "sdhi0_cd", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
-				  "sdhi0_wp", "sdhi0"),
-	/* VIN0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
-				  "vin0_clk", "vin0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
-				  "vin0_data8", "vin0"),
-	/* VIN1 */
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
-				  "vin1_clk", "vin1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
-				  "vin1_data8", "vin1"),
-};
-
-#define PFC	0xfffc0000
-#define PUPR4	0x110
-static void __init bockw_init(void)
-{
-	void __iomem *base;
-	struct clk *clk;
-	struct platform_device *pdev;
-	int i;
-
-	r8a7778_clock_init();
-	r8a7778_init_irq_extpin(1);
-	r8a7778_add_standard_devices();
-
-	platform_device_register_full(&ether_info);
-
-	platform_device_register_full(&vin0_info);
-	/* VIN1 has a pin conflict with Ether */
-	if (!IS_ENABLED(CONFIG_SH_ETH))
-		platform_device_register_full(&vin1_info);
-	platform_device_register_data(NULL, "soc-camera-pdrv", 0,
-				      &iclink0_ml86v7667,
-				      sizeof(iclink0_ml86v7667));
-	platform_device_register_data(NULL, "soc-camera-pdrv", 1,
-				      &iclink1_ml86v7667,
-				      sizeof(iclink1_ml86v7667));
-
-	i2c_register_board_info(0, i2c0_devices,
-				ARRAY_SIZE(i2c0_devices));
-	spi_register_board_info(spi_board_info,
-				ARRAY_SIZE(spi_board_info));
-	pinctrl_register_mappings(bockw_pinctrl_map,
-				  ARRAY_SIZE(bockw_pinctrl_map));
-	r8a7778_pinmux_init();
-
-	platform_device_register_resndata(
-		NULL, "sh_mmcif", -1,
-		mmc_resources, ARRAY_SIZE(mmc_resources),
-		&sh_mmcif_plat, sizeof(struct sh_mmcif_plat_data));
-
-	platform_device_register_resndata(
-		NULL, "rcar_usb_phy", -1,
-		usb_phy_resources,
-		ARRAY_SIZE(usb_phy_resources),
-		&usb_phy_platform_data,
-		sizeof(struct rcar_phy_platform_data));
-
-	regulator_register_fixed(0, dummy_supplies,
-				 ARRAY_SIZE(dummy_supplies));
-	regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
-				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
-	/* for SMSC */
-	fpga = ioremap_nocache(FPGA, SZ_1M);
-	if (fpga) {
-		/*
-		 * CAUTION
-		 *
-		 * IRQ0/1 is cascaded interrupt from FPGA.
-		 * it should be cared in the future
-		 * Now, it is assuming IRQ0 was used only from SMSC.
-		 */
-		u16 val = ioread16(fpga + IRQ0MR);
-		val &= ~(1 << 4); /* enable SMSC911x */
-		iowrite16(val, fpga + IRQ0MR);
-
-		platform_device_register_resndata(
-			NULL, "smsc911x", -1,
-			smsc911x_resources, ARRAY_SIZE(smsc911x_resources),
-			&smsc911x_data, sizeof(smsc911x_data));
-	}
-
-	/* for SDHI */
-	base = ioremap_nocache(PFC, 0x200);
-	if (base) {
-		/*
-		 * FIXME
-		 *
-		 * SDHI CD/WP pin needs pull-up
-		 */
-		iowrite32(ioread32(base + PUPR4) | (3 << 26), base + PUPR4);
-		iounmap(base);
-
-		platform_device_register_resndata(
-			NULL, "sh_mobile_sdhi", 0,
-			sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
-			&sdhi0_info, sizeof(struct tmio_mmc_data));
-	}
-
-	/* for Audio */
-	rsnd_codec_power(5, 1); /* enable ak4642 */
-
-	platform_device_register_simple(
-		"ak4554-adc-dac", 0, NULL, 0);
-
-	platform_device_register_simple(
-		"ak4554-adc-dac", 1, NULL, 0);
-
-	pdev = platform_device_register_resndata(
-		NULL, "rcar_sound", -1,
-		rsnd_resources, ARRAY_SIZE(rsnd_resources),
-		&rsnd_info, sizeof(rsnd_info));
-
-	clk = clk_get(&pdev->dev, "clk_b");
-	clk_set_rate(clk, 24576000);
-	clk_put(clk);
-
-	for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) {
-		struct platform_device_info cardinfo = {
-			.name           = "asoc-simple-card",
-			.id             = i,
-			.data           = &rsnd_card_info[i],
-			.size_data      = sizeof(struct asoc_simple_card_info),
-			.dma_mask	= DMA_BIT_MASK(32),
-		};
-
-		platform_device_register_full(&cardinfo);
-	}
-}
-
-static void __init bockw_init_late(void)
-{
-	r8a7778_init_late();
-	ADD_USB_FUNC_DEVICE_IF_POSSIBLE();
-}
-
-static const char *const bockw_boards_compat_dt[] __initconst = {
-	"renesas,bockw",
-	NULL,
-};
-
-DT_MACHINE_START(BOCKW_DT, "bockw")
-	.init_early	= shmobile_init_delay,
-	.init_irq	= r8a7778_init_irq_dt,
-	.init_machine	= bockw_init,
-	.dt_compat	= bockw_boards_compat_dt,
-	.init_late      = bockw_init_late,
-MACHINE_END
-- 
2.1.4

[PATCH 11/21] ARM: shmobile: bockw: remove legacy board file and config

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Replaced by multi-platform.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig       |  11 -
 arch/arm/mach-shmobile/Makefile      |   5 -
 arch/arm/mach-shmobile/Makefile.boot |  11 -
 arch/arm/mach-shmobile/board-bockw.c | 737 -----------------------------------
 4 files changed, 764 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/board-bockw.c

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 670dce3953d0..6e07e981c8ff 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -115,17 +115,6 @@ config ARCH_R8A7779
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 
-comment "Renesas ARM SoCs Board Type"
-
-config MACH_BOCKW
-	bool "BOCK-W platform"
-	depends on ARCH_R8A7778
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SND_SOC_AK4554 if SND_SIMPLE_CARD
-	select SND_SOC_AK4642 if SND_SIMPLE_CARD && I2C
-	select USE_OF
-
 comment "Renesas ARM SoCs System Configuration"
 
 config CPU_HAS_INTEVT
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 8f235c5ec28d..5392925e15f1 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -49,10 +49,5 @@ obj-$(CONFIG_PM_RCAR)		+= pm-rcar.o
 obj-$(CONFIG_PM_RMOBILE)	+= pm-rmobile.o
 obj-$(CONFIG_ARCH_RCAR_GEN2)	+= pm-rcar-gen2.o
 
-# Board objects
-ifndef CONFIG_ARCH_SHMOBILE_MULTI
-obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
-endif
-
 # Framework support
 obj-$(CONFIG_SMP)		+= $(smp-y)
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 1a4ab160e361..e69de29bb2d1 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -1,11 +0,0 @@
-# per-board load address for uImage
-loadaddr-y	:=
-loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
-
-__ZRELADDR	:= $(sort $(loadaddr-y))
-   zreladdr-y   += $(__ZRELADDR)
-
-# Unsupported legacy stuff
-#
-#params_phys-y (Instead: Pass atags pointer in r2)
-#initrd_phys-y (Instead: Use compiled-in initramfs)
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
deleted file mode 100644
index 25a0e7233fe4..000000000000
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ /dev/null
@@ -1,737 +0,0 @@
-/*
- * Bock-W board support
- *
- * Copyright (C) 2013-2014  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Copyright (C) 2013-2014  Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mtd/partitions.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_data/camera-rcar.h>
-#include <linux/platform_data/usb-rcar-phy.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/usb/renesas_usbhs.h>
-
-#include <media/soc_camera.h>
-#include <asm/mach/arch.h>
-#include <sound/rcar_snd.h>
-#include <sound/simple_card.h>
-
-#include "common.h"
-#include "irqs.h"
-#include "r8a7778.h"
-
-#define FPGA	0x18200000
-#define IRQ0MR	0x30
-#define COMCTLR	0x101c
-static void __iomem *fpga;
-
-/*
- *	CN9(Upper side) SCIF/RCAN selection
- *
- *		1,4	3,6
- * SW40		SCIF	RCAN
- * SW41		SCIF	RCAN
- */
-
-/*
- * MMC (CN26) pin
- *
- * SW6	(D2)	3 pin
- * SW7	(D5)	ON
- * SW8	(D3)	3 pin
- * SW10	(D4)	1 pin
- * SW12	(CLK)	1 pin
- * SW13	(D6)	3 pin
- * SW14	(CMD)	ON
- * SW15	(D6)	1 pin
- * SW16	(D0)	ON
- * SW17	(D1)	ON
- * SW18	(D7)	3 pin
- * SW19	(MMC)	1 pin
- */
-
-/*
- *	SSI settings
- *
- * SW45: 1-4 side	(SSI5 out, ROUT/LOUT CN19 Mid)
- * SW46: 1101		(SSI6 Recorde)
- * SW47: 1110		(SSI5 Playback)
- * SW48: 11		(Recorde power)
- * SW49: 1		(SSI slave mode)
- * SW50: 1111		(SSI7, SSI8)
- * SW51: 1111		(SSI3, SSI4)
- * SW54: 1pin		(ak4554 FPGA control)
- * SW55: 1		(CLKB is 24.5760MHz)
- * SW60: 1pin		(ak4554 FPGA control)
- * SW61: 3pin		(use X11 clock)
- * SW78: 3-6		(ak4642 connects I2C0)
- *
- * You can use sound as
- *
- * hw0: CN19: SSI56-AK4643
- * hw1: CN21: SSI3-AK4554(playback)
- * hw2: CN21: SSI4-AK4554(capture)
- * hw3: CN20: SSI7-AK4554(playback)
- * hw4: CN20: SSI8-AK4554(capture)
- *
- * this command is required when playback on hw0.
- *
- * # amixer set "LINEOUT Mixer DACL" on
- */
-
-/*
- * USB
- *
- * USB1 (CN29) can be Host/Function
- *
- *		Host	Func
- * SW98		1	2
- * SW99		1	3
- */
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "sh_mmcif"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mmcif"),
-};
-
-static struct smsc911x_platform_config smsc911x_data __initdata = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_32BIT,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource smsc911x_resources[] __initdata = {
-	DEFINE_RES_MEM(0x18300000, 0x1000),
-	DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
-};
-
-#if IS_ENABLED(CONFIG_USB_RENESAS_USBHS_UDC)
-/*
- * When USB1 is Func
- */
-static int usbhsf_get_id(struct platform_device *pdev)
-{
-	return USBHS_GADGET;
-}
-
-#define SUSPMODE	0x102
-static int usbhsf_power_ctrl(struct platform_device *pdev,
-			     void __iomem *base, int enable)
-{
-	enable = !!enable;
-
-	r8a7778_usb_phy_power(enable);
-
-	iowrite16(enable << 14, base + SUSPMODE);
-
-	return 0;
-}
-
-static struct resource usbhsf_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe60000, 0x110),
-	DEFINE_RES_IRQ(gic_iid(0x4f)),
-};
-
-static struct renesas_usbhs_platform_info usbhs_info __initdata = {
-	.platform_callback = {
-		.get_id		= usbhsf_get_id,
-		.power_ctrl	= usbhsf_power_ctrl,
-	},
-	.driver_param = {
-		.buswait_bwait	= 4,
-		.d0_tx_id	= HPBDMA_SLAVE_USBFUNC_TX,
-		.d1_rx_id	= HPBDMA_SLAVE_USBFUNC_RX,
-	},
-};
-
-#define USB_PHY_SETTING {.port1_func = 1, .ovc_pin[1].active_high = 1,}
-#define USB1_DEVICE	"renesas_usbhs"
-#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE()			\
-	platform_device_register_resndata(			\
-		NULL, "renesas_usbhs", -1,			\
-		usbhsf_resources,				\
-		ARRAY_SIZE(usbhsf_resources),			\
-		&usbhs_info, sizeof(struct renesas_usbhs_platform_info))
-
-#else
-/*
- * When USB1 is Host
- */
-#define USB_PHY_SETTING { }
-#define USB1_DEVICE	"ehci-platform"
-#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE()
-
-#endif
-
-/* USB */
-static struct resource usb_phy_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe70800, 0x100),
-	DEFINE_RES_MEM(0xffe76000, 0x100),
-};
-
-static struct rcar_phy_platform_data usb_phy_platform_data __initdata =
-	USB_PHY_SETTING;
-
-
-/* SDHI */
-static struct tmio_mmc_data sdhi0_info __initdata = {
-	.chan_priv_tx	= (void *)HPBDMA_SLAVE_SDHI0_TX,
-	.chan_priv_rx	= (void *)HPBDMA_SLAVE_SDHI0_RX,
-	.capabilities	= MMC_CAP_SD_HIGHSPEED,
-	.ocr_mask	= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
-	.flags		= TMIO_MMC_HAS_IDLE_WAIT,
-};
-
-static struct resource sdhi0_resources[] __initdata = {
-	DEFINE_RES_MEM(0xFFE4C000, 0x100),
-	DEFINE_RES_IRQ(gic_iid(0x77)),
-};
-
-/* Ether */
-static struct resource ether_resources[] __initdata = {
-	DEFINE_RES_MEM(0xfde00000, 0x400),
-	DEFINE_RES_IRQ(gic_iid(0x89)),
-};
-
-static struct sh_eth_plat_data ether_platform_data __initdata = {
-	.phy		= 0x01,
-	.edmac_endian	= EDMAC_LITTLE_ENDIAN,
-	.phy_interface	= PHY_INTERFACE_MODE_RMII,
-	/*
-	 * Although the LINK signal is available on the board, it's connected to
-	 * the link/activity LED output of the PHY, thus the link disappears and
-	 * reappears after each packet.  We'd be better off ignoring such signal
-	 * and getting the link state from the PHY indirectly.
-	 */
-	.no_ether_link	= 1,
-};
-
-static struct platform_device_info ether_info __initdata = {
-	.name		= "r8a777x-ether",
-	.id		= -1,
-	.res		= ether_resources,
-	.num_res	= ARRAY_SIZE(ether_resources),
-	.data		= &ether_platform_data,
-	.size_data	= sizeof(ether_platform_data),
-	.dma_mask	= DMA_BIT_MASK(32),
-};
-
-/* I2C */
-static struct i2c_board_info i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("rx8581", 0x51),
-	}, {
-		I2C_BOARD_INFO("ak4643", 0x12),
-	}
-};
-
-/* HSPI*/
-static struct mtd_partition m25p80_spi_flash_partitions[] = {
-	{
-		.name	= "data(spi)",
-		.size	= 0x0100000,
-		.offset	= 0,
-	},
-};
-
-static struct flash_platform_data spi_flash_data = {
-	.name		= "m25p80",
-	.type		= "s25fl008k",
-	.parts		= m25p80_spi_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(m25p80_spi_flash_partitions),
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias	= "m25p80",
-		.max_speed_hz	= 104000000,
-		.chip_select	= 0,
-		.bus_num	= 0,
-		.mode		= SPI_MODE_0,
-		.platform_data	= &spi_flash_data,
-	},
-};
-
-/* MMC */
-static struct resource mmc_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe4e000, 0x100),
-	DEFINE_RES_IRQ(gic_iid(0x5d)),
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_plat __initdata = {
-	.sup_pclk	= 0,
-	.caps		= MMC_CAP_4_BIT_DATA |
-			  MMC_CAP_8_BIT_DATA |
-			  MMC_CAP_NEEDS_POLL,
-};
-
-/* In the default configuration both decoders reside on I2C bus 0 */
-#define BOCKW_CAMERA(idx)						\
-static struct i2c_board_info camera##idx##_info = {			\
-	I2C_BOARD_INFO("ml86v7667", 0x41 + 2 * (idx)),			\
-};									\
-									\
-static struct soc_camera_link iclink##idx##_ml86v7667 __initdata = {	\
-	.bus_id		= idx,						\
-	.i2c_adapter_id	= 0,						\
-	.board_info	= &camera##idx##_info,				\
-}
-
-BOCKW_CAMERA(0);
-BOCKW_CAMERA(1);
-
-/* VIN */
-static struct rcar_vin_platform_data vin_platform_data __initdata = {
-	.flags	= RCAR_VIN_BT656,
-};
-
-#define R8A7778_VIN(idx)						\
-static struct resource vin##idx##_resources[] __initdata = {		\
-	DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000),		\
-	DEFINE_RES_IRQ(gic_iid(0x5a)),					\
-};									\
-									\
-static struct platform_device_info vin##idx##_info __initdata = {	\
-	.name		= "r8a7778-vin",				\
-	.id		= idx,						\
-	.res		= vin##idx##_resources,				\
-	.num_res	= ARRAY_SIZE(vin##idx##_resources),		\
-	.dma_mask	= DMA_BIT_MASK(32),				\
-	.data		= &vin_platform_data,				\
-	.size_data	= sizeof(vin_platform_data),			\
-}
-R8A7778_VIN(0);
-R8A7778_VIN(1);
-
-/* Sound */
-static struct resource rsnd_resources[] __initdata = {
-	[RSND_GEN1_SRU] = DEFINE_RES_MEM(0xffd90000, 0x1000),
-	[RSND_GEN1_SSI] = DEFINE_RES_MEM(0xffd91000, 0x1240),
-	[RSND_GEN1_ADG] = DEFINE_RES_MEM(0xfffe0000, 0x24),
-};
-
-static struct rsnd_ssi_platform_info rsnd_ssi[] = {
-	RSND_SSI_UNUSED, /* SSI 0 */
-	RSND_SSI_UNUSED, /* SSI 1 */
-	RSND_SSI_UNUSED, /* SSI 2 */
-	RSND_SSI(HPBDMA_SLAVE_HPBIF3_TX, gic_iid(0x85), 0),
-	RSND_SSI(HPBDMA_SLAVE_HPBIF4_RX, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE),
-	RSND_SSI(HPBDMA_SLAVE_HPBIF5_TX, gic_iid(0x86), 0),
-	RSND_SSI(HPBDMA_SLAVE_HPBIF6_RX, gic_iid(0x86), 0),
-	RSND_SSI(HPBDMA_SLAVE_HPBIF7_TX, gic_iid(0x86), 0),
-	RSND_SSI(HPBDMA_SLAVE_HPBIF8_RX, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE),
-};
-
-static struct rsnd_src_platform_info rsnd_src[9] = {
-	RSND_SRC_UNUSED, /* SRU 0 */
-	RSND_SRC_UNUSED, /* SRU 1 */
-	RSND_SRC_UNUSED, /* SRU 2 */
-	RSND_SRC(0, 0),
-	RSND_SRC(0, 0),
-	RSND_SRC(0, 0),
-	RSND_SRC(0, 0),
-	RSND_SRC(0, 0),
-	RSND_SRC(0, 0),
-};
-
-static struct rsnd_dai_platform_info rsnd_dai[] = {
-	{
-		.playback = { .ssi = &rsnd_ssi[5], .src = &rsnd_src[5] },
-		.capture  = { .ssi = &rsnd_ssi[6], .src = &rsnd_src[6] },
-	}, {
-		.playback = { .ssi = &rsnd_ssi[3], .src = &rsnd_src[3] },
-	}, {
-		.capture  = { .ssi = &rsnd_ssi[4], .src = &rsnd_src[4] },
-	}, {
-		.playback = { .ssi = &rsnd_ssi[7], .src = &rsnd_src[7] },
-	}, {
-		.capture  = { .ssi = &rsnd_ssi[8], .src = &rsnd_src[8] },
-	},
-};
-
-enum {
-	AK4554_34 = 0,
-	AK4643_56,
-	AK4554_78,
-	SOUND_MAX,
-};
-
-static int rsnd_codec_power(int id, int enable)
-{
-	static int sound_user[SOUND_MAX] = {0, 0, 0};
-	int *usr = NULL;
-	u32 bit;
-
-	switch (id) {
-	case 3:
-	case 4:
-		usr = sound_user + AK4554_34;
-		bit = (1 << 10);
-		break;
-	case 5:
-	case 6:
-		usr = sound_user + AK4643_56;
-		bit = (1 << 6);
-		break;
-	case 7:
-	case 8:
-		usr = sound_user + AK4554_78;
-		bit = (1 << 7);
-		break;
-	}
-
-	if (!usr)
-		return -EIO;
-
-	if (enable) {
-		if (*usr == 0) {
-			u32 val = ioread16(fpga + COMCTLR);
-			val &= ~bit;
-			iowrite16(val, fpga + COMCTLR);
-		}
-
-		(*usr)++;
-	} else {
-		if (*usr == 0)
-			return 0;
-
-		(*usr)--;
-
-		if (*usr == 0) {
-			u32 val = ioread16(fpga + COMCTLR);
-			val |= bit;
-			iowrite16(val, fpga + COMCTLR);
-		}
-	}
-
-	return 0;
-}
-
-static int rsnd_start(int id)
-{
-	return rsnd_codec_power(id, 1);
-}
-
-static int rsnd_stop(int id)
-{
-	return rsnd_codec_power(id, 0);
-}
-
-static struct rcar_snd_info rsnd_info = {
-	.flags		= RSND_GEN1,
-	.ssi_info	= rsnd_ssi,
-	.ssi_info_nr	= ARRAY_SIZE(rsnd_ssi),
-	.src_info	= rsnd_src,
-	.src_info_nr	= ARRAY_SIZE(rsnd_src),
-	.dai_info	= rsnd_dai,
-	.dai_info_nr	= ARRAY_SIZE(rsnd_dai),
-	.start		= rsnd_start,
-	.stop		= rsnd_stop,
-};
-
-static struct asoc_simple_card_info rsnd_card_info[] = {
-	/* SSI5, SSI6 */
-	{
-		.name		= "AK4643",
-		.card		= "SSI56-AK4643",
-		.codec		= "ak4642-codec.0-0012",
-		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
-		.cpu_dai = {
-			.name	= "rsnd-dai.0",
-		},
-		.codec_dai = {
-			.name	= "ak4642-hifi",
-			.sysclk	= 11289600,
-		},
-	},
-	/* SSI3 */
-	{
-		.name		= "AK4554",
-		.card		= "SSI3-AK4554(playback)",
-		.codec		= "ak4554-adc-dac.0",
-		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J,
-		.cpu_dai = {
-			.name	= "rsnd-dai.1",
-		},
-		.codec_dai = {
-			.name	= "ak4554-hifi",
-		},
-	},
-	/* SSI4 */
-	{
-		.name		= "AK4554",
-		.card		= "SSI4-AK4554(capture)",
-		.codec		= "ak4554-adc-dac.0",
-		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J,
-		.cpu_dai = {
-			.name	= "rsnd-dai.2",
-		},
-		.codec_dai = {
-			.name	= "ak4554-hifi",
-		},
-	},
-	/* SSI7 */
-	{
-		.name		= "AK4554",
-		.card		= "SSI7-AK4554(playback)",
-		.codec		= "ak4554-adc-dac.1",
-		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J,
-		.cpu_dai = {
-			.name	= "rsnd-dai.3",
-		},
-		.codec_dai = {
-			.name	= "ak4554-hifi",
-		},
-	},
-	/* SSI8 */
-	{
-		.name		= "AK4554",
-		.card		= "SSI8-AK4554(capture)",
-		.codec		= "ak4554-adc-dac.1",
-		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J,
-		.cpu_dai = {
-			.name	= "rsnd-dai.4",
-		},
-		.codec_dai = {
-			.name	= "ak4554-hifi",
-		},
-	}
-};
-
-static const struct pinctrl_map bockw_pinctrl_map[] = {
-	/* AUDIO */
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "audio_clk_a", "audio_clk"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "audio_clk_b", "audio_clk"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi34_ctrl", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi3_data", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi4_data", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi5_ctrl", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi5_data", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi6_ctrl", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi6_data", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi78_ctrl", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi7_data", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi8_data", "ssi"),
-	/* Ether */
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778",
-				  "ether_rmii", "ether"),
-	/* HSPI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7778",
-				  "hspi0_a", "hspi0"),
-	/* MMC */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
-				  "mmc_data8", "mmc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
-				  "mmc_ctrl", "mmc"),
-	/* SCIF0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
-				  "scif0_data_a", "scif0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
-				  "scif0_ctrl", "scif0"),
-	/* USB */
-	PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778",
-				  "usb0", "usb0"),
-	PIN_MAP_MUX_GROUP_DEFAULT(USB1_DEVICE, "pfc-r8a7778",
-				  "usb1", "usb1"),
-	/* SDHI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
-				  "sdhi0_cd", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
-				  "sdhi0_wp", "sdhi0"),
-	/* VIN0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
-				  "vin0_clk", "vin0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
-				  "vin0_data8", "vin0"),
-	/* VIN1 */
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
-				  "vin1_clk", "vin1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
-				  "vin1_data8", "vin1"),
-};
-
-#define PFC	0xfffc0000
-#define PUPR4	0x110
-static void __init bockw_init(void)
-{
-	void __iomem *base;
-	struct clk *clk;
-	struct platform_device *pdev;
-	int i;
-
-	r8a7778_clock_init();
-	r8a7778_init_irq_extpin(1);
-	r8a7778_add_standard_devices();
-
-	platform_device_register_full(&ether_info);
-
-	platform_device_register_full(&vin0_info);
-	/* VIN1 has a pin conflict with Ether */
-	if (!IS_ENABLED(CONFIG_SH_ETH))
-		platform_device_register_full(&vin1_info);
-	platform_device_register_data(NULL, "soc-camera-pdrv", 0,
-				      &iclink0_ml86v7667,
-				      sizeof(iclink0_ml86v7667));
-	platform_device_register_data(NULL, "soc-camera-pdrv", 1,
-				      &iclink1_ml86v7667,
-				      sizeof(iclink1_ml86v7667));
-
-	i2c_register_board_info(0, i2c0_devices,
-				ARRAY_SIZE(i2c0_devices));
-	spi_register_board_info(spi_board_info,
-				ARRAY_SIZE(spi_board_info));
-	pinctrl_register_mappings(bockw_pinctrl_map,
-				  ARRAY_SIZE(bockw_pinctrl_map));
-	r8a7778_pinmux_init();
-
-	platform_device_register_resndata(
-		NULL, "sh_mmcif", -1,
-		mmc_resources, ARRAY_SIZE(mmc_resources),
-		&sh_mmcif_plat, sizeof(struct sh_mmcif_plat_data));
-
-	platform_device_register_resndata(
-		NULL, "rcar_usb_phy", -1,
-		usb_phy_resources,
-		ARRAY_SIZE(usb_phy_resources),
-		&usb_phy_platform_data,
-		sizeof(struct rcar_phy_platform_data));
-
-	regulator_register_fixed(0, dummy_supplies,
-				 ARRAY_SIZE(dummy_supplies));
-	regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
-				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
-	/* for SMSC */
-	fpga = ioremap_nocache(FPGA, SZ_1M);
-	if (fpga) {
-		/*
-		 * CAUTION
-		 *
-		 * IRQ0/1 is cascaded interrupt from FPGA.
-		 * it should be cared in the future
-		 * Now, it is assuming IRQ0 was used only from SMSC.
-		 */
-		u16 val = ioread16(fpga + IRQ0MR);
-		val &= ~(1 << 4); /* enable SMSC911x */
-		iowrite16(val, fpga + IRQ0MR);
-
-		platform_device_register_resndata(
-			NULL, "smsc911x", -1,
-			smsc911x_resources, ARRAY_SIZE(smsc911x_resources),
-			&smsc911x_data, sizeof(smsc911x_data));
-	}
-
-	/* for SDHI */
-	base = ioremap_nocache(PFC, 0x200);
-	if (base) {
-		/*
-		 * FIXME
-		 *
-		 * SDHI CD/WP pin needs pull-up
-		 */
-		iowrite32(ioread32(base + PUPR4) | (3 << 26), base + PUPR4);
-		iounmap(base);
-
-		platform_device_register_resndata(
-			NULL, "sh_mobile_sdhi", 0,
-			sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
-			&sdhi0_info, sizeof(struct tmio_mmc_data));
-	}
-
-	/* for Audio */
-	rsnd_codec_power(5, 1); /* enable ak4642 */
-
-	platform_device_register_simple(
-		"ak4554-adc-dac", 0, NULL, 0);
-
-	platform_device_register_simple(
-		"ak4554-adc-dac", 1, NULL, 0);
-
-	pdev = platform_device_register_resndata(
-		NULL, "rcar_sound", -1,
-		rsnd_resources, ARRAY_SIZE(rsnd_resources),
-		&rsnd_info, sizeof(rsnd_info));
-
-	clk = clk_get(&pdev->dev, "clk_b");
-	clk_set_rate(clk, 24576000);
-	clk_put(clk);
-
-	for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) {
-		struct platform_device_info cardinfo = {
-			.name           = "asoc-simple-card",
-			.id             = i,
-			.data           = &rsnd_card_info[i],
-			.size_data      = sizeof(struct asoc_simple_card_info),
-			.dma_mask	= DMA_BIT_MASK(32),
-		};
-
-		platform_device_register_full(&cardinfo);
-	}
-}
-
-static void __init bockw_init_late(void)
-{
-	r8a7778_init_late();
-	ADD_USB_FUNC_DEVICE_IF_POSSIBLE();
-}
-
-static const char *const bockw_boards_compat_dt[] __initconst = {
-	"renesas,bockw",
-	NULL,
-};
-
-DT_MACHINE_START(BOCKW_DT, "bockw")
-	.init_early	= shmobile_init_delay,
-	.init_irq	= r8a7778_init_irq_dt,
-	.init_machine	= bockw_init,
-	.dt_compat	= bockw_boards_compat_dt,
-	.init_late      = bockw_init_late,
-MACHINE_END
-- 
2.1.4

[PATCH 12/21] ARM: shmobile: r8a7778: remove obsolete setup code

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Removal of the legacy Bock-W platform obsoletes most setup code.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/r8a7778.h       |  77 -----
 arch/arm/mach-shmobile/setup-r8a7778.c | 560 +--------------------------------
 2 files changed, 1 insertion(+), 636 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/r8a7778.h

diff --git a/arch/arm/mach-shmobile/r8a7778.h b/arch/arm/mach-shmobile/r8a7778.h
deleted file mode 100644
index 0e77f3f81123..000000000000
--- a/arch/arm/mach-shmobile/r8a7778.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Copyright (C) 2013  Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_R8A7778_H__
-#define __ASM_R8A7778_H__
-
-#include <linux/sh_eth.h>
-
-/* HPB-DMA slave IDs */
-enum {
-	HPBDMA_SLAVE_DUMMY,
-	HPBDMA_SLAVE_SDHI0_TX,
-	HPBDMA_SLAVE_SDHI0_RX,
-	HPBDMA_SLAVE_SSI0_TX,
-	HPBDMA_SLAVE_SSI0_RX,
-	HPBDMA_SLAVE_SSI1_TX,
-	HPBDMA_SLAVE_SSI1_RX,
-	HPBDMA_SLAVE_SSI2_TX,
-	HPBDMA_SLAVE_SSI2_RX,
-	HPBDMA_SLAVE_SSI3_TX,
-	HPBDMA_SLAVE_SSI3_RX,
-	HPBDMA_SLAVE_SSI4_TX,
-	HPBDMA_SLAVE_SSI4_RX,
-	HPBDMA_SLAVE_SSI5_TX,
-	HPBDMA_SLAVE_SSI5_RX,
-	HPBDMA_SLAVE_SSI6_TX,
-	HPBDMA_SLAVE_SSI6_RX,
-	HPBDMA_SLAVE_SSI7_TX,
-	HPBDMA_SLAVE_SSI7_RX,
-	HPBDMA_SLAVE_SSI8_TX,
-	HPBDMA_SLAVE_SSI8_RX,
-	HPBDMA_SLAVE_HPBIF0_TX,
-	HPBDMA_SLAVE_HPBIF0_RX,
-	HPBDMA_SLAVE_HPBIF1_TX,
-	HPBDMA_SLAVE_HPBIF1_RX,
-	HPBDMA_SLAVE_HPBIF2_TX,
-	HPBDMA_SLAVE_HPBIF2_RX,
-	HPBDMA_SLAVE_HPBIF3_TX,
-	HPBDMA_SLAVE_HPBIF3_RX,
-	HPBDMA_SLAVE_HPBIF4_TX,
-	HPBDMA_SLAVE_HPBIF4_RX,
-	HPBDMA_SLAVE_HPBIF5_TX,
-	HPBDMA_SLAVE_HPBIF5_RX,
-	HPBDMA_SLAVE_HPBIF6_TX,
-	HPBDMA_SLAVE_HPBIF6_RX,
-	HPBDMA_SLAVE_HPBIF7_TX,
-	HPBDMA_SLAVE_HPBIF7_RX,
-	HPBDMA_SLAVE_HPBIF8_TX,
-	HPBDMA_SLAVE_HPBIF8_RX,
-	HPBDMA_SLAVE_USBFUNC_TX,
-	HPBDMA_SLAVE_USBFUNC_RX,
-};
-
-extern void r8a7778_add_standard_devices(void);
-extern void r8a7778_add_dt_devices(void);
-
-extern void r8a7778_init_late(void);
-extern void r8a7778_init_irq_dt(void);
-extern void r8a7778_clock_init(void);
-extern void r8a7778_init_irq_extpin(int irlm);
-extern void r8a7778_init_irq_extpin_dt(int irlm);
-extern void r8a7778_pinmux_init(void);
-
-extern int r8a7778_usb_phy_power(bool enable);
-
-#endif /* __ASM_R8A7778_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index b9116c81e54b..b0c9986d022d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -16,35 +16,16 @@
  */
 
 #include <linux/clk/shmobile.h>
-#include <linux/kernel.h>
 #include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/platform_data/dma-rcar-hpbdma.h>
-#include <linux/platform_data/gpio-rcar.h>
-#include <linux/platform_data/irq-renesas-intc-irqpin.h>
-#include <linux/platform_device.h>
 #include <linux/irqchip.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/pm_runtime.h>
-#include <linux/usb/phy.h>
-#include <linux/usb/hcd.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <linux/dma-mapping.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/cache-l2x0.h>
 
 #include "common.h"
 #include "irqs.h"
-#include "r8a7778.h"
 
 #define MODEMR 0xffcc0020
 
-#ifdef CONFIG_COMMON_CLK
 static void __init r8a7778_timer_init(void)
 {
 	u32 mode;
@@ -55,535 +36,7 @@ static void __init r8a7778_timer_init(void)
 	iounmap(modemr);
 	r8a7778_clocks_init(mode);
 }
-#endif
 
-/* SCIF */
-#define R8A7778_SCIF(index, baseaddr, irq)			\
-static struct plat_sci_port scif##index##_platform_data = {	\
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
-	.type		= PORT_SCIF,				\
-};								\
-								\
-static struct resource scif##index##_resources[] = {		\
-	DEFINE_RES_MEM(baseaddr, 0x100),			\
-	DEFINE_RES_IRQ(irq),					\
-}
-
-R8A7778_SCIF(0, 0xffe40000, gic_iid(0x66));
-R8A7778_SCIF(1, 0xffe41000, gic_iid(0x67));
-R8A7778_SCIF(2, 0xffe42000, gic_iid(0x68));
-R8A7778_SCIF(3, 0xffe43000, gic_iid(0x69));
-R8A7778_SCIF(4, 0xffe44000, gic_iid(0x6a));
-R8A7778_SCIF(5, 0xffe45000, gic_iid(0x6b));
-
-#define r8a7778_register_scif(index)					       \
-	platform_device_register_resndata(NULL, "sh-sci", index,	       \
-					  scif##index##_resources,	       \
-					  ARRAY_SIZE(scif##index##_resources), \
-					  &scif##index##_platform_data,	       \
-					  sizeof(scif##index##_platform_data))
-
-/* TMU */
-static struct sh_timer_config sh_tmu0_platform_data = {
-	.channels_mask = 7,
-};
-
-static struct resource sh_tmu0_resources[] = {
-	DEFINE_RES_MEM(0xffd80000, 0x30),
-	DEFINE_RES_IRQ(gic_iid(0x40)),
-	DEFINE_RES_IRQ(gic_iid(0x41)),
-	DEFINE_RES_IRQ(gic_iid(0x42)),
-};
-
-#define r8a7778_register_tmu(idx)			\
-	platform_device_register_resndata(		\
-		NULL, "sh-tmu", idx,			\
-		sh_tmu##idx##_resources,		\
-		ARRAY_SIZE(sh_tmu##idx##_resources),	\
-		&sh_tmu##idx##_platform_data,		\
-		sizeof(sh_tmu##idx##_platform_data))
-
-int r8a7778_usb_phy_power(bool enable)
-{
-	static struct usb_phy *phy = NULL;
-	int ret = 0;
-
-	if (!phy)
-		phy = usb_get_phy(USB_PHY_TYPE_USB2);
-
-	if (IS_ERR(phy)) {
-		pr_err("kernel doesn't have usb phy driver\n");
-		return PTR_ERR(phy);
-	}
-
-	if (enable)
-		ret = usb_phy_init(phy);
-	else
-		usb_phy_shutdown(phy);
-
-	return ret;
-}
-
-/* USB */
-static int usb_power_on(struct platform_device *pdev)
-{
-	int ret = r8a7778_usb_phy_power(true);
-
-	if (ret)
-		return ret;
-
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(&pdev->dev);
-
-	return 0;
-}
-
-static void usb_power_off(struct platform_device *pdev)
-{
-	if (r8a7778_usb_phy_power(false))
-		return;
-
-	pm_runtime_put_sync(&pdev->dev);
-	pm_runtime_disable(&pdev->dev);
-}
-
-static int ehci_init_internal_buffer(struct usb_hcd *hcd)
-{
-	/*
-	 * Below are recommended values from the datasheet;
-	 * see [USB :: Setting of EHCI Internal Buffer].
-	 */
-	/* EHCI IP internal buffer setting */
-	iowrite32(0x00ff0040, hcd->regs + 0x0094);
-	/* EHCI IP internal buffer enable */
-	iowrite32(0x00000001, hcd->regs + 0x009C);
-
-	return 0;
-}
-
-static struct usb_ehci_pdata ehci_pdata __initdata = {
-	.power_on	= usb_power_on,
-	.power_off	= usb_power_off,
-	.power_suspend	= usb_power_off,
-	.pre_setup	= ehci_init_internal_buffer,
-};
-
-static struct resource ehci_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe70000, 0x400),
-	DEFINE_RES_IRQ(gic_iid(0x4c)),
-};
-
-static struct usb_ohci_pdata ohci_pdata __initdata = {
-	.power_on	= usb_power_on,
-	.power_off	= usb_power_off,
-	.power_suspend	= usb_power_off,
-};
-
-static struct resource ohci_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe70400, 0x400),
-	DEFINE_RES_IRQ(gic_iid(0x4c)),
-};
-
-#define USB_PLATFORM_INFO(hci)					\
-static struct platform_device_info hci##_info __initdata = {	\
-	.name		= #hci "-platform",			\
-	.id		= -1,					\
-	.res		= hci##_resources,			\
-	.num_res	= ARRAY_SIZE(hci##_resources),		\
-	.data		= &hci##_pdata,				\
-	.size_data	= sizeof(hci##_pdata),			\
-	.dma_mask	= DMA_BIT_MASK(32),			\
-}
-
-USB_PLATFORM_INFO(ehci);
-USB_PLATFORM_INFO(ohci);
-
-/* PFC/GPIO */
-static struct resource pfc_resources[] __initdata = {
-	DEFINE_RES_MEM(0xfffc0000, 0x118),
-};
-
-#define R8A7778_GPIO(idx)						\
-static struct resource r8a7778_gpio##idx##_resources[] __initdata = {	\
-	DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30),		\
-	DEFINE_RES_IRQ(gic_iid(0x87)),					\
-};									\
-									\
-static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \
-	.gpio_base	= 32 * (idx),					\
-	.irq_base	= GPIO_IRQ_BASE(idx),				\
-	.number_of_pins	= 32,						\
-	.pctl_name	= "pfc-r8a7778",				\
-}
-
-R8A7778_GPIO(0);
-R8A7778_GPIO(1);
-R8A7778_GPIO(2);
-R8A7778_GPIO(3);
-R8A7778_GPIO(4);
-
-#define r8a7778_register_gpio(idx)				\
-	platform_device_register_resndata(			\
-		NULL, "gpio_rcar", idx,				\
-		r8a7778_gpio##idx##_resources,			\
-		ARRAY_SIZE(r8a7778_gpio##idx##_resources),	\
-		&r8a7778_gpio##idx##_platform_data,		\
-		sizeof(r8a7778_gpio##idx##_platform_data))
-
-void __init r8a7778_pinmux_init(void)
-{
-	platform_device_register_simple(
-		"pfc-r8a7778", -1,
-		pfc_resources,
-		ARRAY_SIZE(pfc_resources));
-
-	r8a7778_register_gpio(0);
-	r8a7778_register_gpio(1);
-	r8a7778_register_gpio(2);
-	r8a7778_register_gpio(3);
-	r8a7778_register_gpio(4);
-};
-
-/* I2C */
-static struct resource i2c_resources[] __initdata = {
-	/* I2C0 */
-	DEFINE_RES_MEM(0xffc70000, 0x1000),
-	DEFINE_RES_IRQ(gic_iid(0x63)),
-	/* I2C1 */
-	DEFINE_RES_MEM(0xffc71000, 0x1000),
-	DEFINE_RES_IRQ(gic_iid(0x6e)),
-	/* I2C2 */
-	DEFINE_RES_MEM(0xffc72000, 0x1000),
-	DEFINE_RES_IRQ(gic_iid(0x6c)),
-	/* I2C3 */
-	DEFINE_RES_MEM(0xffc73000, 0x1000),
-	DEFINE_RES_IRQ(gic_iid(0x6d)),
-};
-
-static void __init r8a7778_register_i2c(int id)
-{
-	BUG_ON(id < 0 || id > 3);
-
-	platform_device_register_simple(
-		"i2c-rcar", id,
-		i2c_resources + (2 * id), 2);
-}
-
-/* HSPI */
-static struct resource hspi_resources[] __initdata = {
-	/* HSPI0 */
-	DEFINE_RES_MEM(0xfffc7000, 0x18),
-	DEFINE_RES_IRQ(gic_iid(0x5f)),
-	/* HSPI1 */
-	DEFINE_RES_MEM(0xfffc8000, 0x18),
-	DEFINE_RES_IRQ(gic_iid(0x74)),
-	/* HSPI2 */
-	DEFINE_RES_MEM(0xfffc6000, 0x18),
-	DEFINE_RES_IRQ(gic_iid(0x75)),
-};
-
-static void __init r8a7778_register_hspi(int id)
-{
-	BUG_ON(id < 0 || id > 2);
-
-	platform_device_register_simple(
-		"sh-hspi", id,
-		hspi_resources + (2 * id), 2);
-}
-
-void __init r8a7778_add_dt_devices(void)
-{
-#ifdef CONFIG_CACHE_L2X0
-	void __iomem *base = ioremap_nocache(0xf0100000, 0x1000);
-	if (base) {
-		/*
-		 * Shared attribute override enable, 64K*16way
-		 * don't call iounmap(base)
-		 */
-		l2x0_init(base, 0x00400000, 0xc20f0fff);
-	}
-#endif
-}
-
-/* HPB-DMA */
-
-/* Asynchronous mode register (ASYNCMDR) bits */
-#define HPB_DMAE_ASYNCMDR_ASMD22_MASK	BIT(2)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE	BIT(2)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI	0	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_MASK	BIT(1)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE	BIT(1)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI	0	/* SDHI0 */
-
-#define HPBDMA_SSI(_id)				\
-{						\
-	.id	= HPBDMA_SLAVE_SSI## _id ##_TX,	\
-	.addr	= 0xffd91008 + (_id * 0x40),	\
-	.dcr	= HPB_DMAE_DCR_CT |		\
-		  HPB_DMAE_DCR_DIP |		\
-		  HPB_DMAE_DCR_SPDS_32BIT |	\
-		  HPB_DMAE_DCR_DMDL |		\
-		  HPB_DMAE_DCR_DPDS_32BIT,	\
-	.port   = _id + (_id << 8),		\
-	.dma_ch = (28 + _id),			\
-}, {						\
-	.id	= HPBDMA_SLAVE_SSI## _id ##_RX,	\
-	.addr	= 0xffd9100c + (_id * 0x40),	\
-	.dcr	= HPB_DMAE_DCR_CT |		\
-		  HPB_DMAE_DCR_DIP |		\
-		  HPB_DMAE_DCR_SMDL |		\
-		  HPB_DMAE_DCR_SPDS_32BIT |	\
-		  HPB_DMAE_DCR_DPDS_32BIT,	\
-	.port   = _id + (_id << 8),		\
-	.dma_ch = (28 + _id),			\
-}
-
-#define HPBDMA_HPBIF(_id)				\
-{							\
-	.id	= HPBDMA_SLAVE_HPBIF## _id ##_TX,	\
-	.addr	= 0xffda0000 + (_id * 0x1000),		\
-	.dcr	= HPB_DMAE_DCR_CT |			\
-		  HPB_DMAE_DCR_DIP |			\
-		  HPB_DMAE_DCR_SPDS_32BIT |		\
-		  HPB_DMAE_DCR_DMDL |			\
-		  HPB_DMAE_DCR_DPDS_32BIT,		\
-	.port   = 0x1111,				\
-	.dma_ch = (28 + _id),				\
-}, {							\
-	.id	= HPBDMA_SLAVE_HPBIF## _id ##_RX,	\
-	.addr	= 0xffda0000 + (_id * 0x1000),		\
-	.dcr	= HPB_DMAE_DCR_CT |			\
-		  HPB_DMAE_DCR_DIP |			\
-		  HPB_DMAE_DCR_SMDL |			\
-		  HPB_DMAE_DCR_SPDS_32BIT |		\
-		  HPB_DMAE_DCR_DPDS_32BIT,		\
-	.port   = 0x1111,				\
-	.dma_ch = (28 + _id),				\
-}
-
-static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
-	{
-		.id	= HPBDMA_SLAVE_SDHI0_TX,
-		.addr	= 0xffe4c000 + 0x30,
-		.dcr	= HPB_DMAE_DCR_SPDS_16BIT |
-			  HPB_DMAE_DCR_DMDL |
-			  HPB_DMAE_DCR_DPDS_16BIT,
-		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
-			  HPB_DMAE_ASYNCRSTR_ASRST22 |
-			  HPB_DMAE_ASYNCRSTR_ASRST23,
-		.mdr	= HPB_DMAE_ASYNCMDR_ASMD21_MULTI,
-		.mdm	= HPB_DMAE_ASYNCMDR_ASMD21_MASK,
-		.port	= 0x0D0C,
-		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
-		.dma_ch	= 21,
-	}, {
-		.id	= HPBDMA_SLAVE_SDHI0_RX,
-		.addr	= 0xffe4c000 + 0x30,
-		.dcr	= HPB_DMAE_DCR_SMDL |
-			  HPB_DMAE_DCR_SPDS_16BIT |
-			  HPB_DMAE_DCR_DPDS_16BIT,
-		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
-			  HPB_DMAE_ASYNCRSTR_ASRST22 |
-			  HPB_DMAE_ASYNCRSTR_ASRST23,
-		.mdr	= HPB_DMAE_ASYNCMDR_ASMD22_MULTI,
-		.mdm	= HPB_DMAE_ASYNCMDR_ASMD22_MASK,
-		.port	= 0x0D0C,
-		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
-		.dma_ch	= 22,
-	}, {
-		.id	= HPBDMA_SLAVE_USBFUNC_TX, /* for D0 */
-		.addr	= 0xffe60018,
-		.dcr	= HPB_DMAE_DCR_SPDS_32BIT |
-			  HPB_DMAE_DCR_DMDL |
-			  HPB_DMAE_DCR_DPDS_32BIT,
-		.port	= 0x0000,
-		.dma_ch	= 14,
-	}, {
-		.id	= HPBDMA_SLAVE_USBFUNC_RX, /* for D1 */
-		.addr	= 0xffe6001c,
-		.dcr	= HPB_DMAE_DCR_SMDL |
-			  HPB_DMAE_DCR_SPDS_32BIT |
-			  HPB_DMAE_DCR_DPDS_32BIT,
-		.port	= 0x0101,
-		.dma_ch	= 15,
-	},
-
-	HPBDMA_SSI(0),
-	HPBDMA_SSI(1),
-	HPBDMA_SSI(2),
-	HPBDMA_SSI(3),
-	HPBDMA_SSI(4),
-	HPBDMA_SSI(5),
-	HPBDMA_SSI(6),
-	HPBDMA_SSI(7),
-	HPBDMA_SSI(8),
-
-	HPBDMA_HPBIF(0),
-	HPBDMA_HPBIF(1),
-	HPBDMA_HPBIF(2),
-	HPBDMA_HPBIF(3),
-	HPBDMA_HPBIF(4),
-	HPBDMA_HPBIF(5),
-	HPBDMA_HPBIF(6),
-	HPBDMA_HPBIF(7),
-	HPBDMA_HPBIF(8),
-};
-
-static const struct hpb_dmae_channel hpb_dmae_channels[] = {
-	HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_TX), /* ch. 14 */
-	HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_RX), /* ch. 15 */
-	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
-	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_TX),   /* ch. 28 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_RX),   /* ch. 28 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_TX), /* ch. 28 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_RX), /* ch. 28 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_TX),   /* ch. 29 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_RX),   /* ch. 29 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_TX), /* ch. 29 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_RX), /* ch. 29 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_TX),   /* ch. 30 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_RX),   /* ch. 30 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_TX), /* ch. 30 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_RX), /* ch. 30 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_TX),   /* ch. 31 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_RX),   /* ch. 31 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_TX), /* ch. 31 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_RX), /* ch. 31 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_TX),   /* ch. 32 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_RX),   /* ch. 32 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_TX), /* ch. 32 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_RX), /* ch. 32 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_TX),   /* ch. 33 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_RX),   /* ch. 33 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_TX), /* ch. 33 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_RX), /* ch. 33 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_TX),   /* ch. 34 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_RX),   /* ch. 34 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_TX), /* ch. 34 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_RX), /* ch. 34 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_TX),   /* ch. 35 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_RX),   /* ch. 35 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_TX), /* ch. 35 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_RX), /* ch. 35 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_TX),   /* ch. 36 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_RX),   /* ch. 36 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_TX), /* ch. 36 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_RX), /* ch. 36 */
-};
-
-static struct hpb_dmae_pdata dma_platform_data __initdata = {
-	.slaves			= hpb_dmae_slaves,
-	.num_slaves		= ARRAY_SIZE(hpb_dmae_slaves),
-	.channels		= hpb_dmae_channels,
-	.num_channels		= ARRAY_SIZE(hpb_dmae_channels),
-	.ts_shift		= {
-		[XMIT_SZ_8BIT]	= 0,
-		[XMIT_SZ_16BIT]	= 1,
-		[XMIT_SZ_32BIT]	= 2,
-	},
-	.num_hw_channels	= 39,
-};
-
-static struct resource hpb_dmae_resources[] __initdata = {
-	/* Channel registers */
-	DEFINE_RES_MEM(0xffc08000, 0x1000),
-	/* Common registers */
-	DEFINE_RES_MEM(0xffc09000, 0x170),
-	/* Asynchronous reset registers */
-	DEFINE_RES_MEM(0xffc00300, 4),
-	/* Asynchronous mode registers */
-	DEFINE_RES_MEM(0xffc00400, 4),
-	/* IRQ for DMA channels */
-	DEFINE_RES_NAMED(gic_iid(0x7b), 5, NULL, IORESOURCE_IRQ),
-};
-
-static void __init r8a7778_register_hpb_dmae(void)
-{
-	platform_device_register_resndata(NULL, "hpb-dma-engine",
-					  -1, hpb_dmae_resources,
-					  ARRAY_SIZE(hpb_dmae_resources),
-					  &dma_platform_data,
-					  sizeof(dma_platform_data));
-}
-
-void __init r8a7778_add_standard_devices(void)
-{
-	r8a7778_add_dt_devices();
-	r8a7778_register_tmu(0);
-	r8a7778_register_scif(0);
-	r8a7778_register_scif(1);
-	r8a7778_register_scif(2);
-	r8a7778_register_scif(3);
-	r8a7778_register_scif(4);
-	r8a7778_register_scif(5);
-	r8a7778_register_i2c(0);
-	r8a7778_register_i2c(1);
-	r8a7778_register_i2c(2);
-	r8a7778_register_i2c(3);
-	r8a7778_register_hspi(0);
-	r8a7778_register_hspi(1);
-	r8a7778_register_hspi(2);
-
-	r8a7778_register_hpb_dmae();
-}
-
-void __init r8a7778_init_late(void)
-{
-	shmobile_init_late();
-	platform_device_register_full(&ehci_info);
-	platform_device_register_full(&ohci_info);
-}
-
-static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = {
-	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
-	.sense_bitfield_width = 2,
-};
-
-static struct resource irqpin_resources[] __initdata = {
-	DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
-	DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
-	DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
-	DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */
-	DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */
-	DEFINE_RES_IRQ(gic_iid(0x3b)), /* IRQ0 */
-	DEFINE_RES_IRQ(gic_iid(0x3c)), /* IRQ1 */
-	DEFINE_RES_IRQ(gic_iid(0x3d)), /* IRQ2 */
-	DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */
-};
-
-void __init r8a7778_init_irq_extpin_dt(int irlm)
-{
-	void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
-	unsigned long tmp;
-
-	if (!icr0) {
-		pr_warn("r8a7778: unable to setup external irq pin mode\n");
-		return;
-	}
-
-	tmp = ioread32(icr0);
-	if (irlm)
-		tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */
-	else
-		tmp &= ~(1 << 23); /* IRL mode - not supported */
-	tmp |= (1 << 21); /* LVLMODE = 1 */
-	iowrite32(tmp, icr0);
-	iounmap(icr0);
-}
-
-void __init r8a7778_init_irq_extpin(int irlm)
-{
-	r8a7778_init_irq_extpin_dt(irlm);
-	if (irlm)
-		platform_device_register_resndata(
-			NULL, "renesas_intc_irqpin", -1,
-			irqpin_resources, ARRAY_SIZE(irqpin_resources),
-			&irqpin_platform_data, sizeof(irqpin_platform_data));
-}
-
-#ifdef CONFIG_USE_OF
 #define INT2SMSKCR0	0x82288 /* 0xfe782288 */
 #define INT2SMSKCR1	0x8228c /* 0xfe78228c */
 
@@ -592,18 +45,11 @@ void __init r8a7778_init_irq_extpin(int irlm)
 void __init r8a7778_init_irq_dt(void)
 {
 	void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
-	void __iomem *gic_dist_base = ioremap_nocache(0xfe438000, 0x1000);
-	void __iomem *gic_cpu_base = ioremap_nocache(0xfe430000, 0x1000);
-#endif
 
 	BUG_ON(!base);
 
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-#else
 	irqchip_init();
-#endif
+
 	/* route all interrupts to ARM */
 	__raw_writel(0x73ffffff, base + INT2NTSR0);
 	__raw_writel(0xffffffff, base + INT2NTSR1);
@@ -624,10 +70,6 @@ DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)")
 	.init_early	= shmobile_init_delay,
 	.init_irq	= r8a7778_init_irq_dt,
 	.init_late	= shmobile_init_late,
-#ifdef CONFIG_COMMON_CLK
 	.init_time	= r8a7778_timer_init,
-#endif
 	.dt_compat	= r8a7778_compat_dt,
 MACHINE_END
-
-#endif /* CONFIG_USE_OF */
-- 
2.1.4

[PATCH 12/21] ARM: shmobile: r8a7778: remove obsolete setup code

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Removal of the legacy Bock-W platform obsoletes most setup code.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/r8a7778.h       |  77 -----
 arch/arm/mach-shmobile/setup-r8a7778.c | 560 +--------------------------------
 2 files changed, 1 insertion(+), 636 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/r8a7778.h

diff --git a/arch/arm/mach-shmobile/r8a7778.h b/arch/arm/mach-shmobile/r8a7778.h
deleted file mode 100644
index 0e77f3f81123..000000000000
--- a/arch/arm/mach-shmobile/r8a7778.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Copyright (C) 2013  Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_R8A7778_H__
-#define __ASM_R8A7778_H__
-
-#include <linux/sh_eth.h>
-
-/* HPB-DMA slave IDs */
-enum {
-	HPBDMA_SLAVE_DUMMY,
-	HPBDMA_SLAVE_SDHI0_TX,
-	HPBDMA_SLAVE_SDHI0_RX,
-	HPBDMA_SLAVE_SSI0_TX,
-	HPBDMA_SLAVE_SSI0_RX,
-	HPBDMA_SLAVE_SSI1_TX,
-	HPBDMA_SLAVE_SSI1_RX,
-	HPBDMA_SLAVE_SSI2_TX,
-	HPBDMA_SLAVE_SSI2_RX,
-	HPBDMA_SLAVE_SSI3_TX,
-	HPBDMA_SLAVE_SSI3_RX,
-	HPBDMA_SLAVE_SSI4_TX,
-	HPBDMA_SLAVE_SSI4_RX,
-	HPBDMA_SLAVE_SSI5_TX,
-	HPBDMA_SLAVE_SSI5_RX,
-	HPBDMA_SLAVE_SSI6_TX,
-	HPBDMA_SLAVE_SSI6_RX,
-	HPBDMA_SLAVE_SSI7_TX,
-	HPBDMA_SLAVE_SSI7_RX,
-	HPBDMA_SLAVE_SSI8_TX,
-	HPBDMA_SLAVE_SSI8_RX,
-	HPBDMA_SLAVE_HPBIF0_TX,
-	HPBDMA_SLAVE_HPBIF0_RX,
-	HPBDMA_SLAVE_HPBIF1_TX,
-	HPBDMA_SLAVE_HPBIF1_RX,
-	HPBDMA_SLAVE_HPBIF2_TX,
-	HPBDMA_SLAVE_HPBIF2_RX,
-	HPBDMA_SLAVE_HPBIF3_TX,
-	HPBDMA_SLAVE_HPBIF3_RX,
-	HPBDMA_SLAVE_HPBIF4_TX,
-	HPBDMA_SLAVE_HPBIF4_RX,
-	HPBDMA_SLAVE_HPBIF5_TX,
-	HPBDMA_SLAVE_HPBIF5_RX,
-	HPBDMA_SLAVE_HPBIF6_TX,
-	HPBDMA_SLAVE_HPBIF6_RX,
-	HPBDMA_SLAVE_HPBIF7_TX,
-	HPBDMA_SLAVE_HPBIF7_RX,
-	HPBDMA_SLAVE_HPBIF8_TX,
-	HPBDMA_SLAVE_HPBIF8_RX,
-	HPBDMA_SLAVE_USBFUNC_TX,
-	HPBDMA_SLAVE_USBFUNC_RX,
-};
-
-extern void r8a7778_add_standard_devices(void);
-extern void r8a7778_add_dt_devices(void);
-
-extern void r8a7778_init_late(void);
-extern void r8a7778_init_irq_dt(void);
-extern void r8a7778_clock_init(void);
-extern void r8a7778_init_irq_extpin(int irlm);
-extern void r8a7778_init_irq_extpin_dt(int irlm);
-extern void r8a7778_pinmux_init(void);
-
-extern int r8a7778_usb_phy_power(bool enable);
-
-#endif /* __ASM_R8A7778_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index b9116c81e54b..b0c9986d022d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -16,35 +16,16 @@
  */
 
 #include <linux/clk/shmobile.h>
-#include <linux/kernel.h>
 #include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/platform_data/dma-rcar-hpbdma.h>
-#include <linux/platform_data/gpio-rcar.h>
-#include <linux/platform_data/irq-renesas-intc-irqpin.h>
-#include <linux/platform_device.h>
 #include <linux/irqchip.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/pm_runtime.h>
-#include <linux/usb/phy.h>
-#include <linux/usb/hcd.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <linux/dma-mapping.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/cache-l2x0.h>
 
 #include "common.h"
 #include "irqs.h"
-#include "r8a7778.h"
 
 #define MODEMR 0xffcc0020
 
-#ifdef CONFIG_COMMON_CLK
 static void __init r8a7778_timer_init(void)
 {
 	u32 mode;
@@ -55,535 +36,7 @@ static void __init r8a7778_timer_init(void)
 	iounmap(modemr);
 	r8a7778_clocks_init(mode);
 }
-#endif
 
-/* SCIF */
-#define R8A7778_SCIF(index, baseaddr, irq)			\
-static struct plat_sci_port scif##index##_platform_data = {	\
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
-	.type		= PORT_SCIF,				\
-};								\
-								\
-static struct resource scif##index##_resources[] = {		\
-	DEFINE_RES_MEM(baseaddr, 0x100),			\
-	DEFINE_RES_IRQ(irq),					\
-}
-
-R8A7778_SCIF(0, 0xffe40000, gic_iid(0x66));
-R8A7778_SCIF(1, 0xffe41000, gic_iid(0x67));
-R8A7778_SCIF(2, 0xffe42000, gic_iid(0x68));
-R8A7778_SCIF(3, 0xffe43000, gic_iid(0x69));
-R8A7778_SCIF(4, 0xffe44000, gic_iid(0x6a));
-R8A7778_SCIF(5, 0xffe45000, gic_iid(0x6b));
-
-#define r8a7778_register_scif(index)					       \
-	platform_device_register_resndata(NULL, "sh-sci", index,	       \
-					  scif##index##_resources,	       \
-					  ARRAY_SIZE(scif##index##_resources), \
-					  &scif##index##_platform_data,	       \
-					  sizeof(scif##index##_platform_data))
-
-/* TMU */
-static struct sh_timer_config sh_tmu0_platform_data = {
-	.channels_mask = 7,
-};
-
-static struct resource sh_tmu0_resources[] = {
-	DEFINE_RES_MEM(0xffd80000, 0x30),
-	DEFINE_RES_IRQ(gic_iid(0x40)),
-	DEFINE_RES_IRQ(gic_iid(0x41)),
-	DEFINE_RES_IRQ(gic_iid(0x42)),
-};
-
-#define r8a7778_register_tmu(idx)			\
-	platform_device_register_resndata(		\
-		NULL, "sh-tmu", idx,			\
-		sh_tmu##idx##_resources,		\
-		ARRAY_SIZE(sh_tmu##idx##_resources),	\
-		&sh_tmu##idx##_platform_data,		\
-		sizeof(sh_tmu##idx##_platform_data))
-
-int r8a7778_usb_phy_power(bool enable)
-{
-	static struct usb_phy *phy = NULL;
-	int ret = 0;
-
-	if (!phy)
-		phy = usb_get_phy(USB_PHY_TYPE_USB2);
-
-	if (IS_ERR(phy)) {
-		pr_err("kernel doesn't have usb phy driver\n");
-		return PTR_ERR(phy);
-	}
-
-	if (enable)
-		ret = usb_phy_init(phy);
-	else
-		usb_phy_shutdown(phy);
-
-	return ret;
-}
-
-/* USB */
-static int usb_power_on(struct platform_device *pdev)
-{
-	int ret = r8a7778_usb_phy_power(true);
-
-	if (ret)
-		return ret;
-
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(&pdev->dev);
-
-	return 0;
-}
-
-static void usb_power_off(struct platform_device *pdev)
-{
-	if (r8a7778_usb_phy_power(false))
-		return;
-
-	pm_runtime_put_sync(&pdev->dev);
-	pm_runtime_disable(&pdev->dev);
-}
-
-static int ehci_init_internal_buffer(struct usb_hcd *hcd)
-{
-	/*
-	 * Below are recommended values from the datasheet;
-	 * see [USB :: Setting of EHCI Internal Buffer].
-	 */
-	/* EHCI IP internal buffer setting */
-	iowrite32(0x00ff0040, hcd->regs + 0x0094);
-	/* EHCI IP internal buffer enable */
-	iowrite32(0x00000001, hcd->regs + 0x009C);
-
-	return 0;
-}
-
-static struct usb_ehci_pdata ehci_pdata __initdata = {
-	.power_on	= usb_power_on,
-	.power_off	= usb_power_off,
-	.power_suspend	= usb_power_off,
-	.pre_setup	= ehci_init_internal_buffer,
-};
-
-static struct resource ehci_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe70000, 0x400),
-	DEFINE_RES_IRQ(gic_iid(0x4c)),
-};
-
-static struct usb_ohci_pdata ohci_pdata __initdata = {
-	.power_on	= usb_power_on,
-	.power_off	= usb_power_off,
-	.power_suspend	= usb_power_off,
-};
-
-static struct resource ohci_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe70400, 0x400),
-	DEFINE_RES_IRQ(gic_iid(0x4c)),
-};
-
-#define USB_PLATFORM_INFO(hci)					\
-static struct platform_device_info hci##_info __initdata = {	\
-	.name		= #hci "-platform",			\
-	.id		= -1,					\
-	.res		= hci##_resources,			\
-	.num_res	= ARRAY_SIZE(hci##_resources),		\
-	.data		= &hci##_pdata,				\
-	.size_data	= sizeof(hci##_pdata),			\
-	.dma_mask	= DMA_BIT_MASK(32),			\
-}
-
-USB_PLATFORM_INFO(ehci);
-USB_PLATFORM_INFO(ohci);
-
-/* PFC/GPIO */
-static struct resource pfc_resources[] __initdata = {
-	DEFINE_RES_MEM(0xfffc0000, 0x118),
-};
-
-#define R8A7778_GPIO(idx)						\
-static struct resource r8a7778_gpio##idx##_resources[] __initdata = {	\
-	DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30),		\
-	DEFINE_RES_IRQ(gic_iid(0x87)),					\
-};									\
-									\
-static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \
-	.gpio_base	= 32 * (idx),					\
-	.irq_base	= GPIO_IRQ_BASE(idx),				\
-	.number_of_pins	= 32,						\
-	.pctl_name	= "pfc-r8a7778",				\
-}
-
-R8A7778_GPIO(0);
-R8A7778_GPIO(1);
-R8A7778_GPIO(2);
-R8A7778_GPIO(3);
-R8A7778_GPIO(4);
-
-#define r8a7778_register_gpio(idx)				\
-	platform_device_register_resndata(			\
-		NULL, "gpio_rcar", idx,				\
-		r8a7778_gpio##idx##_resources,			\
-		ARRAY_SIZE(r8a7778_gpio##idx##_resources),	\
-		&r8a7778_gpio##idx##_platform_data,		\
-		sizeof(r8a7778_gpio##idx##_platform_data))
-
-void __init r8a7778_pinmux_init(void)
-{
-	platform_device_register_simple(
-		"pfc-r8a7778", -1,
-		pfc_resources,
-		ARRAY_SIZE(pfc_resources));
-
-	r8a7778_register_gpio(0);
-	r8a7778_register_gpio(1);
-	r8a7778_register_gpio(2);
-	r8a7778_register_gpio(3);
-	r8a7778_register_gpio(4);
-};
-
-/* I2C */
-static struct resource i2c_resources[] __initdata = {
-	/* I2C0 */
-	DEFINE_RES_MEM(0xffc70000, 0x1000),
-	DEFINE_RES_IRQ(gic_iid(0x63)),
-	/* I2C1 */
-	DEFINE_RES_MEM(0xffc71000, 0x1000),
-	DEFINE_RES_IRQ(gic_iid(0x6e)),
-	/* I2C2 */
-	DEFINE_RES_MEM(0xffc72000, 0x1000),
-	DEFINE_RES_IRQ(gic_iid(0x6c)),
-	/* I2C3 */
-	DEFINE_RES_MEM(0xffc73000, 0x1000),
-	DEFINE_RES_IRQ(gic_iid(0x6d)),
-};
-
-static void __init r8a7778_register_i2c(int id)
-{
-	BUG_ON(id < 0 || id > 3);
-
-	platform_device_register_simple(
-		"i2c-rcar", id,
-		i2c_resources + (2 * id), 2);
-}
-
-/* HSPI */
-static struct resource hspi_resources[] __initdata = {
-	/* HSPI0 */
-	DEFINE_RES_MEM(0xfffc7000, 0x18),
-	DEFINE_RES_IRQ(gic_iid(0x5f)),
-	/* HSPI1 */
-	DEFINE_RES_MEM(0xfffc8000, 0x18),
-	DEFINE_RES_IRQ(gic_iid(0x74)),
-	/* HSPI2 */
-	DEFINE_RES_MEM(0xfffc6000, 0x18),
-	DEFINE_RES_IRQ(gic_iid(0x75)),
-};
-
-static void __init r8a7778_register_hspi(int id)
-{
-	BUG_ON(id < 0 || id > 2);
-
-	platform_device_register_simple(
-		"sh-hspi", id,
-		hspi_resources + (2 * id), 2);
-}
-
-void __init r8a7778_add_dt_devices(void)
-{
-#ifdef CONFIG_CACHE_L2X0
-	void __iomem *base = ioremap_nocache(0xf0100000, 0x1000);
-	if (base) {
-		/*
-		 * Shared attribute override enable, 64K*16way
-		 * don't call iounmap(base)
-		 */
-		l2x0_init(base, 0x00400000, 0xc20f0fff);
-	}
-#endif
-}
-
-/* HPB-DMA */
-
-/* Asynchronous mode register (ASYNCMDR) bits */
-#define HPB_DMAE_ASYNCMDR_ASMD22_MASK	BIT(2)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE	BIT(2)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI	0	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_MASK	BIT(1)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE	BIT(1)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI	0	/* SDHI0 */
-
-#define HPBDMA_SSI(_id)				\
-{						\
-	.id	= HPBDMA_SLAVE_SSI## _id ##_TX,	\
-	.addr	= 0xffd91008 + (_id * 0x40),	\
-	.dcr	= HPB_DMAE_DCR_CT |		\
-		  HPB_DMAE_DCR_DIP |		\
-		  HPB_DMAE_DCR_SPDS_32BIT |	\
-		  HPB_DMAE_DCR_DMDL |		\
-		  HPB_DMAE_DCR_DPDS_32BIT,	\
-	.port   = _id + (_id << 8),		\
-	.dma_ch = (28 + _id),			\
-}, {						\
-	.id	= HPBDMA_SLAVE_SSI## _id ##_RX,	\
-	.addr	= 0xffd9100c + (_id * 0x40),	\
-	.dcr	= HPB_DMAE_DCR_CT |		\
-		  HPB_DMAE_DCR_DIP |		\
-		  HPB_DMAE_DCR_SMDL |		\
-		  HPB_DMAE_DCR_SPDS_32BIT |	\
-		  HPB_DMAE_DCR_DPDS_32BIT,	\
-	.port   = _id + (_id << 8),		\
-	.dma_ch = (28 + _id),			\
-}
-
-#define HPBDMA_HPBIF(_id)				\
-{							\
-	.id	= HPBDMA_SLAVE_HPBIF## _id ##_TX,	\
-	.addr	= 0xffda0000 + (_id * 0x1000),		\
-	.dcr	= HPB_DMAE_DCR_CT |			\
-		  HPB_DMAE_DCR_DIP |			\
-		  HPB_DMAE_DCR_SPDS_32BIT |		\
-		  HPB_DMAE_DCR_DMDL |			\
-		  HPB_DMAE_DCR_DPDS_32BIT,		\
-	.port   = 0x1111,				\
-	.dma_ch = (28 + _id),				\
-}, {							\
-	.id	= HPBDMA_SLAVE_HPBIF## _id ##_RX,	\
-	.addr	= 0xffda0000 + (_id * 0x1000),		\
-	.dcr	= HPB_DMAE_DCR_CT |			\
-		  HPB_DMAE_DCR_DIP |			\
-		  HPB_DMAE_DCR_SMDL |			\
-		  HPB_DMAE_DCR_SPDS_32BIT |		\
-		  HPB_DMAE_DCR_DPDS_32BIT,		\
-	.port   = 0x1111,				\
-	.dma_ch = (28 + _id),				\
-}
-
-static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
-	{
-		.id	= HPBDMA_SLAVE_SDHI0_TX,
-		.addr	= 0xffe4c000 + 0x30,
-		.dcr	= HPB_DMAE_DCR_SPDS_16BIT |
-			  HPB_DMAE_DCR_DMDL |
-			  HPB_DMAE_DCR_DPDS_16BIT,
-		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
-			  HPB_DMAE_ASYNCRSTR_ASRST22 |
-			  HPB_DMAE_ASYNCRSTR_ASRST23,
-		.mdr	= HPB_DMAE_ASYNCMDR_ASMD21_MULTI,
-		.mdm	= HPB_DMAE_ASYNCMDR_ASMD21_MASK,
-		.port	= 0x0D0C,
-		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
-		.dma_ch	= 21,
-	}, {
-		.id	= HPBDMA_SLAVE_SDHI0_RX,
-		.addr	= 0xffe4c000 + 0x30,
-		.dcr	= HPB_DMAE_DCR_SMDL |
-			  HPB_DMAE_DCR_SPDS_16BIT |
-			  HPB_DMAE_DCR_DPDS_16BIT,
-		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
-			  HPB_DMAE_ASYNCRSTR_ASRST22 |
-			  HPB_DMAE_ASYNCRSTR_ASRST23,
-		.mdr	= HPB_DMAE_ASYNCMDR_ASMD22_MULTI,
-		.mdm	= HPB_DMAE_ASYNCMDR_ASMD22_MASK,
-		.port	= 0x0D0C,
-		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
-		.dma_ch	= 22,
-	}, {
-		.id	= HPBDMA_SLAVE_USBFUNC_TX, /* for D0 */
-		.addr	= 0xffe60018,
-		.dcr	= HPB_DMAE_DCR_SPDS_32BIT |
-			  HPB_DMAE_DCR_DMDL |
-			  HPB_DMAE_DCR_DPDS_32BIT,
-		.port	= 0x0000,
-		.dma_ch	= 14,
-	}, {
-		.id	= HPBDMA_SLAVE_USBFUNC_RX, /* for D1 */
-		.addr	= 0xffe6001c,
-		.dcr	= HPB_DMAE_DCR_SMDL |
-			  HPB_DMAE_DCR_SPDS_32BIT |
-			  HPB_DMAE_DCR_DPDS_32BIT,
-		.port	= 0x0101,
-		.dma_ch	= 15,
-	},
-
-	HPBDMA_SSI(0),
-	HPBDMA_SSI(1),
-	HPBDMA_SSI(2),
-	HPBDMA_SSI(3),
-	HPBDMA_SSI(4),
-	HPBDMA_SSI(5),
-	HPBDMA_SSI(6),
-	HPBDMA_SSI(7),
-	HPBDMA_SSI(8),
-
-	HPBDMA_HPBIF(0),
-	HPBDMA_HPBIF(1),
-	HPBDMA_HPBIF(2),
-	HPBDMA_HPBIF(3),
-	HPBDMA_HPBIF(4),
-	HPBDMA_HPBIF(5),
-	HPBDMA_HPBIF(6),
-	HPBDMA_HPBIF(7),
-	HPBDMA_HPBIF(8),
-};
-
-static const struct hpb_dmae_channel hpb_dmae_channels[] = {
-	HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_TX), /* ch. 14 */
-	HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_RX), /* ch. 15 */
-	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
-	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_TX),   /* ch. 28 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_RX),   /* ch. 28 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_TX), /* ch. 28 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_RX), /* ch. 28 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_TX),   /* ch. 29 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_RX),   /* ch. 29 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_TX), /* ch. 29 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_RX), /* ch. 29 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_TX),   /* ch. 30 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_RX),   /* ch. 30 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_TX), /* ch. 30 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_RX), /* ch. 30 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_TX),   /* ch. 31 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_RX),   /* ch. 31 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_TX), /* ch. 31 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_RX), /* ch. 31 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_TX),   /* ch. 32 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_RX),   /* ch. 32 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_TX), /* ch. 32 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_RX), /* ch. 32 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_TX),   /* ch. 33 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_RX),   /* ch. 33 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_TX), /* ch. 33 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_RX), /* ch. 33 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_TX),   /* ch. 34 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_RX),   /* ch. 34 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_TX), /* ch. 34 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_RX), /* ch. 34 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_TX),   /* ch. 35 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_RX),   /* ch. 35 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_TX), /* ch. 35 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_RX), /* ch. 35 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_TX),   /* ch. 36 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_RX),   /* ch. 36 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_TX), /* ch. 36 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_RX), /* ch. 36 */
-};
-
-static struct hpb_dmae_pdata dma_platform_data __initdata = {
-	.slaves			= hpb_dmae_slaves,
-	.num_slaves		= ARRAY_SIZE(hpb_dmae_slaves),
-	.channels		= hpb_dmae_channels,
-	.num_channels		= ARRAY_SIZE(hpb_dmae_channels),
-	.ts_shift		= {
-		[XMIT_SZ_8BIT]	= 0,
-		[XMIT_SZ_16BIT]	= 1,
-		[XMIT_SZ_32BIT]	= 2,
-	},
-	.num_hw_channels	= 39,
-};
-
-static struct resource hpb_dmae_resources[] __initdata = {
-	/* Channel registers */
-	DEFINE_RES_MEM(0xffc08000, 0x1000),
-	/* Common registers */
-	DEFINE_RES_MEM(0xffc09000, 0x170),
-	/* Asynchronous reset registers */
-	DEFINE_RES_MEM(0xffc00300, 4),
-	/* Asynchronous mode registers */
-	DEFINE_RES_MEM(0xffc00400, 4),
-	/* IRQ for DMA channels */
-	DEFINE_RES_NAMED(gic_iid(0x7b), 5, NULL, IORESOURCE_IRQ),
-};
-
-static void __init r8a7778_register_hpb_dmae(void)
-{
-	platform_device_register_resndata(NULL, "hpb-dma-engine",
-					  -1, hpb_dmae_resources,
-					  ARRAY_SIZE(hpb_dmae_resources),
-					  &dma_platform_data,
-					  sizeof(dma_platform_data));
-}
-
-void __init r8a7778_add_standard_devices(void)
-{
-	r8a7778_add_dt_devices();
-	r8a7778_register_tmu(0);
-	r8a7778_register_scif(0);
-	r8a7778_register_scif(1);
-	r8a7778_register_scif(2);
-	r8a7778_register_scif(3);
-	r8a7778_register_scif(4);
-	r8a7778_register_scif(5);
-	r8a7778_register_i2c(0);
-	r8a7778_register_i2c(1);
-	r8a7778_register_i2c(2);
-	r8a7778_register_i2c(3);
-	r8a7778_register_hspi(0);
-	r8a7778_register_hspi(1);
-	r8a7778_register_hspi(2);
-
-	r8a7778_register_hpb_dmae();
-}
-
-void __init r8a7778_init_late(void)
-{
-	shmobile_init_late();
-	platform_device_register_full(&ehci_info);
-	platform_device_register_full(&ohci_info);
-}
-
-static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = {
-	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
-	.sense_bitfield_width = 2,
-};
-
-static struct resource irqpin_resources[] __initdata = {
-	DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
-	DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
-	DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
-	DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */
-	DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */
-	DEFINE_RES_IRQ(gic_iid(0x3b)), /* IRQ0 */
-	DEFINE_RES_IRQ(gic_iid(0x3c)), /* IRQ1 */
-	DEFINE_RES_IRQ(gic_iid(0x3d)), /* IRQ2 */
-	DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */
-};
-
-void __init r8a7778_init_irq_extpin_dt(int irlm)
-{
-	void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
-	unsigned long tmp;
-
-	if (!icr0) {
-		pr_warn("r8a7778: unable to setup external irq pin mode\n");
-		return;
-	}
-
-	tmp = ioread32(icr0);
-	if (irlm)
-		tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */
-	else
-		tmp &= ~(1 << 23); /* IRL mode - not supported */
-	tmp |= (1 << 21); /* LVLMODE = 1 */
-	iowrite32(tmp, icr0);
-	iounmap(icr0);
-}
-
-void __init r8a7778_init_irq_extpin(int irlm)
-{
-	r8a7778_init_irq_extpin_dt(irlm);
-	if (irlm)
-		platform_device_register_resndata(
-			NULL, "renesas_intc_irqpin", -1,
-			irqpin_resources, ARRAY_SIZE(irqpin_resources),
-			&irqpin_platform_data, sizeof(irqpin_platform_data));
-}
-
-#ifdef CONFIG_USE_OF
 #define INT2SMSKCR0	0x82288 /* 0xfe782288 */
 #define INT2SMSKCR1	0x8228c /* 0xfe78228c */
 
@@ -592,18 +45,11 @@ void __init r8a7778_init_irq_extpin(int irlm)
 void __init r8a7778_init_irq_dt(void)
 {
 	void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
-	void __iomem *gic_dist_base = ioremap_nocache(0xfe438000, 0x1000);
-	void __iomem *gic_cpu_base = ioremap_nocache(0xfe430000, 0x1000);
-#endif
 
 	BUG_ON(!base);
 
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-#else
 	irqchip_init();
-#endif
+
 	/* route all interrupts to ARM */
 	__raw_writel(0x73ffffff, base + INT2NTSR0);
 	__raw_writel(0xffffffff, base + INT2NTSR1);
@@ -624,10 +70,6 @@ DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)")
 	.init_early	= shmobile_init_delay,
 	.init_irq	= r8a7778_init_irq_dt,
 	.init_late	= shmobile_init_late,
-#ifdef CONFIG_COMMON_CLK
 	.init_time	= r8a7778_timer_init,
-#endif
 	.dt_compat	= r8a7778_compat_dt,
 MACHINE_END
-
-#endif /* CONFIG_USE_OF */
-- 
2.1.4

[PATCH 13/21] ARM: shmobile: Kconfig: remove obsolete option ARCH_R8A7778

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Obsoleted by removal of r8a7778 legacy platform.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 6e07e981c8ff..61a59b18e9d6 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -103,12 +103,6 @@ if ARCH_SHMOBILE_LEGACY
 
 comment "Renesas ARM SoCs System Type"
 
-config ARCH_R8A7778
-	bool "R-Car M1A (R8A77781)"
-	select ARCH_RCAR_GEN1
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-
 config ARCH_R8A7779
 	bool "R-Car H1 (R8A77790)"
 	select ARCH_RCAR_GEN1
-- 
2.1.4

[PATCH 13/21] ARM: shmobile: Kconfig: remove obsolete option ARCH_R8A7778

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Obsoleted by removal of r8a7778 legacy platform.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 6e07e981c8ff..61a59b18e9d6 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -103,12 +103,6 @@ if ARCH_SHMOBILE_LEGACY
 
 comment "Renesas ARM SoCs System Type"
 
-config ARCH_R8A7778
-	bool "R-Car M1A (R8A77781)"
-	select ARCH_RCAR_GEN1
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-
 config ARCH_R8A7779
 	bool "R-Car H1 (R8A77790)"
 	select ARCH_RCAR_GEN1
-- 
2.1.4

[PATCH 14/21] ARM: shmobile: r8a7778: remove legacy clock implementation

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Bock-W was the last legacy clock platform, so this also removes the
common legacy clock code.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Makefile        |   6 -
 arch/arm/mach-shmobile/clock-r8a7778.c | 342 ---------------------------------
 arch/arm/mach-shmobile/clock.c         |  47 -----
 arch/arm/mach-shmobile/clock.h         |  42 ----
 4 files changed, 437 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/clock-r8a7778.c
 delete mode 100644 arch/arm/mach-shmobile/clock.c
 delete mode 100644 arch/arm/mach-shmobile/clock.h

diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 5392925e15f1..a65c80ac9009 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -18,12 +18,6 @@ obj-$(CONFIG_ARCH_R8A7794)	+= setup-r8a7794.o
 obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o
 obj-$(CONFIG_ARCH_R7S72100)	+= setup-r7s72100.o
 
-# Clock objects
-ifndef CONFIG_COMMON_CLK
-obj-y				+= clock.o
-obj-$(CONFIG_ARCH_R8A7778)	+= clock-r8a7778.o
-endif
-
 # CPU reset vector handling objects
 cpu-y				:= platsmp.o headsmp.o
 
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
deleted file mode 100644
index e8510c35558c..000000000000
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * r8a7778 clock framework support
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on r8a7779
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- *     MD      MD      MD      MD       PLLA   PLLB    EXTAL   clki    clkz
- *     19      18      12      11                      (HMz)   (MHz)   (MHz)
- *----------------------------------------------------------------------------
- *     1       0       0       0       x21     x21     38.00   800     800
- *     1       0       0       1       x24     x24     33.33   800     800
- *     1       0       1       0       x28     x28     28.50   800     800
- *     1       0       1       1       x32     x32     25.00   800     800
- *     1       1       0       1       x24     x21     33.33   800     700
- *     1       1       1       0       x28     x21     28.50   800     600
- *     1       1       1       1       x32     x24     25.00   800     600
- */
-
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include "clock.h"
-#include "common.h"
-
-#define MSTPCR0		IOMEM(0xffc80030)
-#define MSTPCR1		IOMEM(0xffc80034)
-#define MSTPCR3		IOMEM(0xffc8003c)
-#define MSTPSR1		IOMEM(0xffc80044)
-#define MSTPSR4		IOMEM(0xffc80048)
-#define MSTPSR6		IOMEM(0xffc8004c)
-#define MSTPCR4		IOMEM(0xffc80050)
-#define MSTPCR5		IOMEM(0xffc80054)
-#define MSTPCR6		IOMEM(0xffc80058)
-#define MODEMR		0xFFCC0020
-
-#define MD(nr)	BIT(nr)
-
-/* ioremap() through clock mapping mandatory to avoid
- * collision with ARM coherent DMA virtual memory range.
- */
-
-static struct clk_mapping cpg_mapping = {
-	.phys	= 0xffc80000,
-	.len	= 0x80,
-};
-
-static struct clk extal_clk = {
-	/* .rate will be updated on r8a7778_clock_init() */
-	.mapping = &cpg_mapping,
-};
-
-static struct clk audio_clk_a = {
-};
-
-static struct clk audio_clk_b = {
-};
-
-static struct clk audio_clk_c = {
-};
-
-/*
- * clock ratio of these clock will be updated
- * on r8a7778_clock_init()
- */
-SH_FIXED_RATIO_CLK_SET(plla_clk,	extal_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(pllb_clk,	extal_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(i_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(s_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(s1_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(s3_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(s4_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(b_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(out_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(p_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(g_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(z_clk,		pllb_clk,  1, 1);
-
-static struct clk *main_clks[] = {
-	&extal_clk,
-	&plla_clk,
-	&pllb_clk,
-	&i_clk,
-	&s_clk,
-	&s1_clk,
-	&s3_clk,
-	&s4_clk,
-	&b_clk,
-	&out_clk,
-	&p_clk,
-	&g_clk,
-	&z_clk,
-	&audio_clk_a,
-	&audio_clk_b,
-	&audio_clk_c,
-};
-
-enum {
-	MSTP531, MSTP530,
-	MSTP529, MSTP528, MSTP527, MSTP526, MSTP525, MSTP524, MSTP523,
-	MSTP331,
-	MSTP323, MSTP322, MSTP321,
-	MSTP311, MSTP310,
-	MSTP309, MSTP308, MSTP307,
-	MSTP114,
-	MSTP110, MSTP109,
-	MSTP100,
-	MSTP030,
-	MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
-	MSTP016, MSTP015, MSTP012, MSTP011, MSTP010,
-	MSTP009, MSTP008, MSTP007,
-	MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP531] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 31, 0), /* SCU0 */
-	[MSTP530] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 30, 0), /* SCU1 */
-	[MSTP529] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 29, 0), /* SCU2 */
-	[MSTP528] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 28, 0), /* SCU3 */
-	[MSTP527] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 27, 0), /* SCU4 */
-	[MSTP526] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 26, 0), /* SCU5 */
-	[MSTP525] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 25, 0), /* SCU6 */
-	[MSTP524] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 24, 0), /* SCU7 */
-	[MSTP523] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 23, 0), /* SCU8 */
-	[MSTP331] = SH_CLK_MSTP32(&s4_clk, MSTPCR3, 31, 0), /* MMC */
-	[MSTP323] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 23, 0), /* SDHI0 */
-	[MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */
-	[MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */
-	[MSTP311] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 11, 0), /* SSI4 */
-	[MSTP310] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 10, 0), /* SSI5 */
-	[MSTP309] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  9, 0), /* SSI6 */
-	[MSTP308] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  8, 0), /* SSI7 */
-	[MSTP307] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  7, 0), /* SSI8 */
-	[MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */
-	[MSTP110] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 10, 0), /* VIN0 */
-	[MSTP109] = SH_CLK_MSTP32(&s_clk, MSTPCR1,  9, 0), /* VIN1 */
-	[MSTP100] = SH_CLK_MSTP32(&p_clk, MSTPCR1,  0, 0), /* USB0/1 */
-	[MSTP030] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 30, 0), /* I2C0 */
-	[MSTP029] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 29, 0), /* I2C1 */
-	[MSTP028] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 28, 0), /* I2C2 */
-	[MSTP027] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 27, 0), /* I2C3 */
-	[MSTP026] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 26, 0), /* SCIF0 */
-	[MSTP025] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 25, 0), /* SCIF1 */
-	[MSTP024] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 24, 0), /* SCIF2 */
-	[MSTP023] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 23, 0), /* SCIF3 */
-	[MSTP022] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 22, 0), /* SCIF4 */
-	[MSTP021] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 21, 0), /* SCIF5 */
-	[MSTP016] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 16, 0), /* TMU0 */
-	[MSTP015] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 15, 0), /* TMU1 */
-	[MSTP012] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 12, 0), /* SSI0 */
-	[MSTP011] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 11, 0), /* SSI1 */
-	[MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */
-	[MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  9, 0), /* SSI3 */
-	[MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  8, 0), /* SRU */
-	[MSTP007] = SH_CLK_MSTP32(&s_clk, MSTPCR0,  7, 0), /* HSPI */
-};
-
-static struct clk_lookup lookups[] = {
-	/* main */
-	CLKDEV_CON_ID("shyway_clk",	&s_clk),
-	CLKDEV_CON_ID("peripheral_clk",	&p_clk),
-
-	/* MSTP32 clocks */
-	CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP331]), /* MMC */
-	CLKDEV_DEV_ID("ffe4e000.mmc", &mstp_clks[MSTP331]), /* MMC */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */
-	CLKDEV_DEV_ID("ffe4c000.sd", &mstp_clks[MSTP323]), /* SDHI0 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
-	CLKDEV_DEV_ID("ffe4d000.sd", &mstp_clks[MSTP322]), /* SDHI1 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
-	CLKDEV_DEV_ID("ffe4f000.sd", &mstp_clks[MSTP321]), /* SDHI2 */
-	CLKDEV_DEV_ID("r8a777x-ether", &mstp_clks[MSTP114]), /* Ether */
-	CLKDEV_DEV_ID("r8a7778-vin.0", &mstp_clks[MSTP110]), /* VIN0 */
-	CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */
-	CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
-	CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
-	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP100]), /* USB FUNC */
-	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
-	CLKDEV_DEV_ID("ffc70000.i2c", &mstp_clks[MSTP030]), /* I2C0 */
-	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
-	CLKDEV_DEV_ID("ffc71000.i2c", &mstp_clks[MSTP029]), /* I2C1 */
-	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
-	CLKDEV_DEV_ID("ffc72000.i2c", &mstp_clks[MSTP028]), /* I2C2 */
-	CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */
-	CLKDEV_DEV_ID("ffc73000.i2c", &mstp_clks[MSTP027]), /* I2C3 */
-	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
-	CLKDEV_DEV_ID("ffe40000.serial", &mstp_clks[MSTP026]), /* SCIF0 */
-	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
-	CLKDEV_DEV_ID("ffe41000.serial", &mstp_clks[MSTP025]), /* SCIF1 */
-	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
-	CLKDEV_DEV_ID("ffe42000.serial", &mstp_clks[MSTP024]), /* SCIF2 */
-	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
-	CLKDEV_DEV_ID("ffe43000.serial", &mstp_clks[MSTP023]), /* SCIF3 */
-	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
-	CLKDEV_DEV_ID("ffe44000.serial", &mstp_clks[MSTP022]), /* SCIF4 */
-	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
-	CLKDEV_DEV_ID("ffe45000.serial", &mstp_clks[MSTP021]), /* SCIF5 */
-	CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
-	CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */
-	CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
-	CLKDEV_DEV_ID("fffc8000.spi", &mstp_clks[MSTP007]), /* HSPI1 */
-	CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */
-	CLKDEV_DEV_ID("fffc6000.spi", &mstp_clks[MSTP007]), /* HSPI2 */
-	CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */
-
-	CLKDEV_ICK_ID("clk_a", "rcar_sound", &audio_clk_a),
-	CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b),
-	CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c),
-	CLKDEV_ICK_ID("clk_i", "rcar_sound", &s1_clk),
-	CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]),
-	CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP011]),
-	CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP010]),
-	CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP009]),
-	CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP311]),
-	CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP310]),
-	CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]),
-	CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]),
-	CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]),
-	CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP531]),
-	CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP530]),
-	CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP529]),
-	CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP528]),
-	CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP527]),
-	CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP526]),
-	CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP525]),
-	CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP524]),
-	CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP523]),
-	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]),
-	CLKDEV_ICK_ID("fck", "ffd80000.timer", &mstp_clks[MSTP016]),
-	CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP015]),
-	CLKDEV_ICK_ID("fck", "ffd81000.timer", &mstp_clks[MSTP015]),
-};
-
-void __init r8a7778_clock_init(void)
-{
-	void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
-	u32 mode;
-	int k, ret = 0;
-
-	BUG_ON(!modemr);
-	mode = ioread32(modemr);
-	iounmap(modemr);
-
-	switch (mode & (MD(19) | MD(18) | MD(12) | MD(11))) {
-	case MD(19):
-		extal_clk.rate = 38000000;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	21, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	21, 1);
-		break;
-	case MD(19) | MD(11):
-		extal_clk.rate = 33333333;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	24, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	24, 1);
-		break;
-	case MD(19) | MD(12):
-		extal_clk.rate = 28500000;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	28, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	28, 1);
-		break;
-	case MD(19) | MD(12) | MD(11):
-		extal_clk.rate = 25000000;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	32, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	32, 1);
-		break;
-	case MD(19) | MD(18) | MD(11):
-		extal_clk.rate = 33333333;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	24, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	21, 1);
-		break;
-	case MD(19) | MD(18) | MD(12):
-		extal_clk.rate = 28500000;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	28, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	21, 1);
-		break;
-	case MD(19) | MD(18) | MD(12) | MD(11):
-		extal_clk.rate = 25000000;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	32, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	24, 1);
-		break;
-	default:
-		BUG();
-	}
-
-	if (mode & MD(1)) {
-		SH_CLK_SET_RATIO(&i_clk_ratio,	1, 1);
-		SH_CLK_SET_RATIO(&s_clk_ratio,	1, 3);
-		SH_CLK_SET_RATIO(&s1_clk_ratio,	1, 6);
-		SH_CLK_SET_RATIO(&s3_clk_ratio,	1, 4);
-		SH_CLK_SET_RATIO(&s4_clk_ratio,	1, 8);
-		SH_CLK_SET_RATIO(&p_clk_ratio,	1, 12);
-		SH_CLK_SET_RATIO(&g_clk_ratio,	1, 12);
-		if (mode & MD(2)) {
-			SH_CLK_SET_RATIO(&b_clk_ratio,		1, 18);
-			SH_CLK_SET_RATIO(&out_clk_ratio,	1, 18);
-		} else {
-			SH_CLK_SET_RATIO(&b_clk_ratio,		1, 12);
-			SH_CLK_SET_RATIO(&out_clk_ratio,	1, 12);
-		}
-	} else {
-		SH_CLK_SET_RATIO(&i_clk_ratio,	1, 1);
-		SH_CLK_SET_RATIO(&s_clk_ratio,	1, 4);
-		SH_CLK_SET_RATIO(&s1_clk_ratio,	1, 8);
-		SH_CLK_SET_RATIO(&s3_clk_ratio,	1, 4);
-		SH_CLK_SET_RATIO(&s4_clk_ratio,	1, 8);
-		SH_CLK_SET_RATIO(&p_clk_ratio,	1, 16);
-		SH_CLK_SET_RATIO(&g_clk_ratio,	1, 12);
-		if (mode & MD(2)) {
-			SH_CLK_SET_RATIO(&b_clk_ratio,		1, 16);
-			SH_CLK_SET_RATIO(&out_clk_ratio,	1, 16);
-		} else {
-			SH_CLK_SET_RATIO(&b_clk_ratio,		1, 12);
-			SH_CLK_SET_RATIO(&out_clk_ratio,	1, 12);
-		}
-	}
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	if (!ret)
-		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup r8a7778 clocks\n");
-}
diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
deleted file mode 100644
index 68c2d06d0eaa..000000000000
--- a/arch/arm/mach-shmobile/clock.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * SH-Mobile Clock Framework
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * Used together with arch/arm/common/clkdev.c and drivers/sh/clk.c.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sh_clk.h>
-
-#include "clock.h"
-#include "common.h"
-
-unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk)
-{
-	struct clk_ratio *p = clk->priv;
-
-	return clk->parent->rate / p->div * p->mul;
-};
-
-struct sh_clk_ops shmobile_fixed_ratio_clk_ops = {
-	.recalc	= shmobile_fixed_ratio_clk_recalc,
-};
-
-int __init shmobile_clk_init(void)
-{
-	/* Kick the child clocks.. */
-	recalculate_root_clocks();
-
-	/* Enable the necessary init clocks */
-	clk_enable_init_clocks();
-
-	return 0;
-}
diff --git a/arch/arm/mach-shmobile/clock.h b/arch/arm/mach-shmobile/clock.h
deleted file mode 100644
index cf3552ea1019..000000000000
--- a/arch/arm/mach-shmobile/clock.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef CLOCK_H
-#define CLOCK_H
-
-/* legacy clock implementation */
-
-struct clk;
-unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk);
-extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops;
-
-/* clock ratio */
-struct clk_ratio {
-	int mul;
-	int div;
-};
-
-#define SH_CLK_RATIO(name, m, d)		\
-static struct clk_ratio name ##_ratio = {	\
-	.mul = m,				\
-	.div = d,				\
-}
-
-#define SH_FIXED_RATIO_CLKg(name, p, r)	\
-struct clk name = {			\
-	.parent	= &p,				\
-	.ops	= &shmobile_fixed_ratio_clk_ops,\
-	.priv	= &r ## _ratio,			\
-}
-
-#define SH_FIXED_RATIO_CLK(name, p, r)		\
-static SH_FIXED_RATIO_CLKg(name, p, r)
-
-#define SH_FIXED_RATIO_CLK_SET(name, p, m, d)	\
-	SH_CLK_RATIO(name, m, d);		\
-	SH_FIXED_RATIO_CLK(name, p, name)
-
-#define SH_CLK_SET_RATIO(p, m, d)	\
-do {			\
-	(p)->mul = m;	\
-	(p)->div = d;	\
-} while (0)
-
-#endif
-- 
2.1.4

[PATCH 14/21] ARM: shmobile: r8a7778: remove legacy clock implementation

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Bock-W was the last legacy clock platform, so this also removes the
common legacy clock code.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Makefile        |   6 -
 arch/arm/mach-shmobile/clock-r8a7778.c | 342 ---------------------------------
 arch/arm/mach-shmobile/clock.c         |  47 -----
 arch/arm/mach-shmobile/clock.h         |  42 ----
 4 files changed, 437 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/clock-r8a7778.c
 delete mode 100644 arch/arm/mach-shmobile/clock.c
 delete mode 100644 arch/arm/mach-shmobile/clock.h

diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 5392925e15f1..a65c80ac9009 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -18,12 +18,6 @@ obj-$(CONFIG_ARCH_R8A7794)	+= setup-r8a7794.o
 obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o
 obj-$(CONFIG_ARCH_R7S72100)	+= setup-r7s72100.o
 
-# Clock objects
-ifndef CONFIG_COMMON_CLK
-obj-y				+= clock.o
-obj-$(CONFIG_ARCH_R8A7778)	+= clock-r8a7778.o
-endif
-
 # CPU reset vector handling objects
 cpu-y				:= platsmp.o headsmp.o
 
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
deleted file mode 100644
index e8510c35558c..000000000000
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * r8a7778 clock framework support
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on r8a7779
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- *     MD      MD      MD      MD       PLLA   PLLB    EXTAL   clki    clkz
- *     19      18      12      11                      (HMz)   (MHz)   (MHz)
- *----------------------------------------------------------------------------
- *     1       0       0       0       x21     x21     38.00   800     800
- *     1       0       0       1       x24     x24     33.33   800     800
- *     1       0       1       0       x28     x28     28.50   800     800
- *     1       0       1       1       x32     x32     25.00   800     800
- *     1       1       0       1       x24     x21     33.33   800     700
- *     1       1       1       0       x28     x21     28.50   800     600
- *     1       1       1       1       x32     x24     25.00   800     600
- */
-
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include "clock.h"
-#include "common.h"
-
-#define MSTPCR0		IOMEM(0xffc80030)
-#define MSTPCR1		IOMEM(0xffc80034)
-#define MSTPCR3		IOMEM(0xffc8003c)
-#define MSTPSR1		IOMEM(0xffc80044)
-#define MSTPSR4		IOMEM(0xffc80048)
-#define MSTPSR6		IOMEM(0xffc8004c)
-#define MSTPCR4		IOMEM(0xffc80050)
-#define MSTPCR5		IOMEM(0xffc80054)
-#define MSTPCR6		IOMEM(0xffc80058)
-#define MODEMR		0xFFCC0020
-
-#define MD(nr)	BIT(nr)
-
-/* ioremap() through clock mapping mandatory to avoid
- * collision with ARM coherent DMA virtual memory range.
- */
-
-static struct clk_mapping cpg_mapping = {
-	.phys	= 0xffc80000,
-	.len	= 0x80,
-};
-
-static struct clk extal_clk = {
-	/* .rate will be updated on r8a7778_clock_init() */
-	.mapping = &cpg_mapping,
-};
-
-static struct clk audio_clk_a = {
-};
-
-static struct clk audio_clk_b = {
-};
-
-static struct clk audio_clk_c = {
-};
-
-/*
- * clock ratio of these clock will be updated
- * on r8a7778_clock_init()
- */
-SH_FIXED_RATIO_CLK_SET(plla_clk,	extal_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(pllb_clk,	extal_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(i_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(s_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(s1_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(s3_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(s4_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(b_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(out_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(p_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(g_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(z_clk,		pllb_clk,  1, 1);
-
-static struct clk *main_clks[] = {
-	&extal_clk,
-	&plla_clk,
-	&pllb_clk,
-	&i_clk,
-	&s_clk,
-	&s1_clk,
-	&s3_clk,
-	&s4_clk,
-	&b_clk,
-	&out_clk,
-	&p_clk,
-	&g_clk,
-	&z_clk,
-	&audio_clk_a,
-	&audio_clk_b,
-	&audio_clk_c,
-};
-
-enum {
-	MSTP531, MSTP530,
-	MSTP529, MSTP528, MSTP527, MSTP526, MSTP525, MSTP524, MSTP523,
-	MSTP331,
-	MSTP323, MSTP322, MSTP321,
-	MSTP311, MSTP310,
-	MSTP309, MSTP308, MSTP307,
-	MSTP114,
-	MSTP110, MSTP109,
-	MSTP100,
-	MSTP030,
-	MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
-	MSTP016, MSTP015, MSTP012, MSTP011, MSTP010,
-	MSTP009, MSTP008, MSTP007,
-	MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP531] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 31, 0), /* SCU0 */
-	[MSTP530] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 30, 0), /* SCU1 */
-	[MSTP529] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 29, 0), /* SCU2 */
-	[MSTP528] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 28, 0), /* SCU3 */
-	[MSTP527] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 27, 0), /* SCU4 */
-	[MSTP526] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 26, 0), /* SCU5 */
-	[MSTP525] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 25, 0), /* SCU6 */
-	[MSTP524] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 24, 0), /* SCU7 */
-	[MSTP523] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 23, 0), /* SCU8 */
-	[MSTP331] = SH_CLK_MSTP32(&s4_clk, MSTPCR3, 31, 0), /* MMC */
-	[MSTP323] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 23, 0), /* SDHI0 */
-	[MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */
-	[MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */
-	[MSTP311] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 11, 0), /* SSI4 */
-	[MSTP310] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 10, 0), /* SSI5 */
-	[MSTP309] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  9, 0), /* SSI6 */
-	[MSTP308] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  8, 0), /* SSI7 */
-	[MSTP307] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  7, 0), /* SSI8 */
-	[MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */
-	[MSTP110] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 10, 0), /* VIN0 */
-	[MSTP109] = SH_CLK_MSTP32(&s_clk, MSTPCR1,  9, 0), /* VIN1 */
-	[MSTP100] = SH_CLK_MSTP32(&p_clk, MSTPCR1,  0, 0), /* USB0/1 */
-	[MSTP030] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 30, 0), /* I2C0 */
-	[MSTP029] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 29, 0), /* I2C1 */
-	[MSTP028] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 28, 0), /* I2C2 */
-	[MSTP027] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 27, 0), /* I2C3 */
-	[MSTP026] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 26, 0), /* SCIF0 */
-	[MSTP025] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 25, 0), /* SCIF1 */
-	[MSTP024] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 24, 0), /* SCIF2 */
-	[MSTP023] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 23, 0), /* SCIF3 */
-	[MSTP022] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 22, 0), /* SCIF4 */
-	[MSTP021] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 21, 0), /* SCIF5 */
-	[MSTP016] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 16, 0), /* TMU0 */
-	[MSTP015] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 15, 0), /* TMU1 */
-	[MSTP012] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 12, 0), /* SSI0 */
-	[MSTP011] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 11, 0), /* SSI1 */
-	[MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */
-	[MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  9, 0), /* SSI3 */
-	[MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  8, 0), /* SRU */
-	[MSTP007] = SH_CLK_MSTP32(&s_clk, MSTPCR0,  7, 0), /* HSPI */
-};
-
-static struct clk_lookup lookups[] = {
-	/* main */
-	CLKDEV_CON_ID("shyway_clk",	&s_clk),
-	CLKDEV_CON_ID("peripheral_clk",	&p_clk),
-
-	/* MSTP32 clocks */
-	CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP331]), /* MMC */
-	CLKDEV_DEV_ID("ffe4e000.mmc", &mstp_clks[MSTP331]), /* MMC */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */
-	CLKDEV_DEV_ID("ffe4c000.sd", &mstp_clks[MSTP323]), /* SDHI0 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
-	CLKDEV_DEV_ID("ffe4d000.sd", &mstp_clks[MSTP322]), /* SDHI1 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
-	CLKDEV_DEV_ID("ffe4f000.sd", &mstp_clks[MSTP321]), /* SDHI2 */
-	CLKDEV_DEV_ID("r8a777x-ether", &mstp_clks[MSTP114]), /* Ether */
-	CLKDEV_DEV_ID("r8a7778-vin.0", &mstp_clks[MSTP110]), /* VIN0 */
-	CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */
-	CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
-	CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
-	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP100]), /* USB FUNC */
-	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
-	CLKDEV_DEV_ID("ffc70000.i2c", &mstp_clks[MSTP030]), /* I2C0 */
-	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
-	CLKDEV_DEV_ID("ffc71000.i2c", &mstp_clks[MSTP029]), /* I2C1 */
-	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
-	CLKDEV_DEV_ID("ffc72000.i2c", &mstp_clks[MSTP028]), /* I2C2 */
-	CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */
-	CLKDEV_DEV_ID("ffc73000.i2c", &mstp_clks[MSTP027]), /* I2C3 */
-	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
-	CLKDEV_DEV_ID("ffe40000.serial", &mstp_clks[MSTP026]), /* SCIF0 */
-	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
-	CLKDEV_DEV_ID("ffe41000.serial", &mstp_clks[MSTP025]), /* SCIF1 */
-	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
-	CLKDEV_DEV_ID("ffe42000.serial", &mstp_clks[MSTP024]), /* SCIF2 */
-	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
-	CLKDEV_DEV_ID("ffe43000.serial", &mstp_clks[MSTP023]), /* SCIF3 */
-	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
-	CLKDEV_DEV_ID("ffe44000.serial", &mstp_clks[MSTP022]), /* SCIF4 */
-	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
-	CLKDEV_DEV_ID("ffe45000.serial", &mstp_clks[MSTP021]), /* SCIF5 */
-	CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
-	CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */
-	CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
-	CLKDEV_DEV_ID("fffc8000.spi", &mstp_clks[MSTP007]), /* HSPI1 */
-	CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */
-	CLKDEV_DEV_ID("fffc6000.spi", &mstp_clks[MSTP007]), /* HSPI2 */
-	CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */
-
-	CLKDEV_ICK_ID("clk_a", "rcar_sound", &audio_clk_a),
-	CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b),
-	CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c),
-	CLKDEV_ICK_ID("clk_i", "rcar_sound", &s1_clk),
-	CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]),
-	CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP011]),
-	CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP010]),
-	CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP009]),
-	CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP311]),
-	CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP310]),
-	CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]),
-	CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]),
-	CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]),
-	CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP531]),
-	CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP530]),
-	CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP529]),
-	CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP528]),
-	CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP527]),
-	CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP526]),
-	CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP525]),
-	CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP524]),
-	CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP523]),
-	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]),
-	CLKDEV_ICK_ID("fck", "ffd80000.timer", &mstp_clks[MSTP016]),
-	CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP015]),
-	CLKDEV_ICK_ID("fck", "ffd81000.timer", &mstp_clks[MSTP015]),
-};
-
-void __init r8a7778_clock_init(void)
-{
-	void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
-	u32 mode;
-	int k, ret = 0;
-
-	BUG_ON(!modemr);
-	mode = ioread32(modemr);
-	iounmap(modemr);
-
-	switch (mode & (MD(19) | MD(18) | MD(12) | MD(11))) {
-	case MD(19):
-		extal_clk.rate = 38000000;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	21, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	21, 1);
-		break;
-	case MD(19) | MD(11):
-		extal_clk.rate = 33333333;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	24, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	24, 1);
-		break;
-	case MD(19) | MD(12):
-		extal_clk.rate = 28500000;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	28, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	28, 1);
-		break;
-	case MD(19) | MD(12) | MD(11):
-		extal_clk.rate = 25000000;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	32, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	32, 1);
-		break;
-	case MD(19) | MD(18) | MD(11):
-		extal_clk.rate = 33333333;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	24, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	21, 1);
-		break;
-	case MD(19) | MD(18) | MD(12):
-		extal_clk.rate = 28500000;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	28, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	21, 1);
-		break;
-	case MD(19) | MD(18) | MD(12) | MD(11):
-		extal_clk.rate = 25000000;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	32, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	24, 1);
-		break;
-	default:
-		BUG();
-	}
-
-	if (mode & MD(1)) {
-		SH_CLK_SET_RATIO(&i_clk_ratio,	1, 1);
-		SH_CLK_SET_RATIO(&s_clk_ratio,	1, 3);
-		SH_CLK_SET_RATIO(&s1_clk_ratio,	1, 6);
-		SH_CLK_SET_RATIO(&s3_clk_ratio,	1, 4);
-		SH_CLK_SET_RATIO(&s4_clk_ratio,	1, 8);
-		SH_CLK_SET_RATIO(&p_clk_ratio,	1, 12);
-		SH_CLK_SET_RATIO(&g_clk_ratio,	1, 12);
-		if (mode & MD(2)) {
-			SH_CLK_SET_RATIO(&b_clk_ratio,		1, 18);
-			SH_CLK_SET_RATIO(&out_clk_ratio,	1, 18);
-		} else {
-			SH_CLK_SET_RATIO(&b_clk_ratio,		1, 12);
-			SH_CLK_SET_RATIO(&out_clk_ratio,	1, 12);
-		}
-	} else {
-		SH_CLK_SET_RATIO(&i_clk_ratio,	1, 1);
-		SH_CLK_SET_RATIO(&s_clk_ratio,	1, 4);
-		SH_CLK_SET_RATIO(&s1_clk_ratio,	1, 8);
-		SH_CLK_SET_RATIO(&s3_clk_ratio,	1, 4);
-		SH_CLK_SET_RATIO(&s4_clk_ratio,	1, 8);
-		SH_CLK_SET_RATIO(&p_clk_ratio,	1, 16);
-		SH_CLK_SET_RATIO(&g_clk_ratio,	1, 12);
-		if (mode & MD(2)) {
-			SH_CLK_SET_RATIO(&b_clk_ratio,		1, 16);
-			SH_CLK_SET_RATIO(&out_clk_ratio,	1, 16);
-		} else {
-			SH_CLK_SET_RATIO(&b_clk_ratio,		1, 12);
-			SH_CLK_SET_RATIO(&out_clk_ratio,	1, 12);
-		}
-	}
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	if (!ret)
-		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup r8a7778 clocks\n");
-}
diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
deleted file mode 100644
index 68c2d06d0eaa..000000000000
--- a/arch/arm/mach-shmobile/clock.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * SH-Mobile Clock Framework
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * Used together with arch/arm/common/clkdev.c and drivers/sh/clk.c.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sh_clk.h>
-
-#include "clock.h"
-#include "common.h"
-
-unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk)
-{
-	struct clk_ratio *p = clk->priv;
-
-	return clk->parent->rate / p->div * p->mul;
-};
-
-struct sh_clk_ops shmobile_fixed_ratio_clk_ops = {
-	.recalc	= shmobile_fixed_ratio_clk_recalc,
-};
-
-int __init shmobile_clk_init(void)
-{
-	/* Kick the child clocks.. */
-	recalculate_root_clocks();
-
-	/* Enable the necessary init clocks */
-	clk_enable_init_clocks();
-
-	return 0;
-}
diff --git a/arch/arm/mach-shmobile/clock.h b/arch/arm/mach-shmobile/clock.h
deleted file mode 100644
index cf3552ea1019..000000000000
--- a/arch/arm/mach-shmobile/clock.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef CLOCK_H
-#define CLOCK_H
-
-/* legacy clock implementation */
-
-struct clk;
-unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk);
-extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops;
-
-/* clock ratio */
-struct clk_ratio {
-	int mul;
-	int div;
-};
-
-#define SH_CLK_RATIO(name, m, d)		\
-static struct clk_ratio name ##_ratio = {	\
-	.mul = m,				\
-	.div = d,				\
-}
-
-#define SH_FIXED_RATIO_CLKg(name, p, r)	\
-struct clk name = {			\
-	.parent	= &p,				\
-	.ops	= &shmobile_fixed_ratio_clk_ops,\
-	.priv	= &r ## _ratio,			\
-}
-
-#define SH_FIXED_RATIO_CLK(name, p, r)		\
-static SH_FIXED_RATIO_CLKg(name, p, r)
-
-#define SH_FIXED_RATIO_CLK_SET(name, p, m, d)	\
-	SH_CLK_RATIO(name, m, d);		\
-	SH_FIXED_RATIO_CLK(name, p, name)
-
-#define SH_CLK_SET_RATIO(p, m, d)	\
-do {			\
-	(p)->mul = m;	\
-	(p)->div = d;	\
-} while (0)
-
-#endif
-- 
2.1.4

[PATCH 15/21] ARM: shmobile: remove ARCH_SHMOBILE_LEGACY option

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

With Bock-W, the last legacy platform has been removed.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/Kconfig               | 26 +-------------------------
 arch/arm/Kconfig.debug         |  3 +--
 arch/arm/mach-shmobile/Kconfig | 23 -----------------------
 3 files changed, 2 insertions(+), 50 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 72ad724c67ae..471a3670cd3e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -621,28 +621,6 @@ config ARCH_PXA
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
-config ARCH_SHMOBILE_LEGACY
-	bool "Renesas ARM SoCs (non-multiplatform)"
-	select ARCH_SHMOBILE
-	select ARM_PATCH_PHYS_VIRT if MMU
-	select CLKDEV_LOOKUP
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-	select MULTI_IRQ_HANDLER
-	select NO_IOPORT_MAP
-	select PINCTRL
-	select PM_GENERIC_DOMAINS if PM
-	select SH_CLK_CPG
-	select SPARSE_IRQ
-	help
-	  Support for Renesas ARM SoC platforms using a non-multiplatform
-	  kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car
-	  and RZ families.
-
 config ARCH_RPC
 	bool "RiscPC"
 	select ARCH_ACORN
@@ -1534,7 +1512,6 @@ config HZ_FIXED
 	default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
 		ARCH_S5PV210 || ARCH_EXYNOS4
 	default 128 if SOC_AT91RM9200
-	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
 	default 0
 
 choice
@@ -1752,8 +1729,7 @@ config ARM_MODULE_PLTS
 source "mm/Kconfig"
 
 config FORCE_MAX_ZONEORDER
-	int "Maximum zone order" if ARCH_SHMOBILE_LEGACY
-	range 11 64 if ARCH_SHMOBILE_LEGACY
+	int "Maximum zone order"
 	default "12" if SOC_AM33XX
 	default "9" if SA1111 || ARCH_EFM32
 	default "11"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 0cfd7f947f6b..40a3c25c1e0d 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1621,8 +1621,7 @@ config DEBUG_UNCOMPRESS
 config UNCOMPRESS_INCLUDE
 	string
 	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
-					PLAT_SAMSUNG || ARM_SINGLE_ARMV7M || \
-					ARCH_SHMOBILE_LEGACY
+					PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
 	default "mach/uncompress.h"
 
 config EARLY_PRINTK
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 61a59b18e9d6..7f2e05304d3d 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -99,29 +99,6 @@ config ARCH_SH73A0
 comment "Renesas ARM SoCs System Configuration"
 endif
 
-if ARCH_SHMOBILE_LEGACY
-
-comment "Renesas ARM SoCs System Type"
-
-config ARCH_R8A7779
-	bool "R-Car H1 (R8A77790)"
-	select ARCH_RCAR_GEN1
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-
-comment "Renesas ARM SoCs System Configuration"
-
-config CPU_HAS_INTEVT
-        bool
-	default y
-
-config SH_CLK_CPG
-	bool
-
-source "drivers/sh/Kconfig"
-
-endif
-
 if ARCH_SHMOBILE
 
 menu "Timer and clock configuration"
-- 
2.1.4

[PATCH 15/21] ARM: shmobile: remove ARCH_SHMOBILE_LEGACY option

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

With Bock-W, the last legacy platform has been removed.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/Kconfig               | 26 +-------------------------
 arch/arm/Kconfig.debug         |  3 +--
 arch/arm/mach-shmobile/Kconfig | 23 -----------------------
 3 files changed, 2 insertions(+), 50 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 72ad724c67ae..471a3670cd3e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -621,28 +621,6 @@ config ARCH_PXA
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
-config ARCH_SHMOBILE_LEGACY
-	bool "Renesas ARM SoCs (non-multiplatform)"
-	select ARCH_SHMOBILE
-	select ARM_PATCH_PHYS_VIRT if MMU
-	select CLKDEV_LOOKUP
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-	select MULTI_IRQ_HANDLER
-	select NO_IOPORT_MAP
-	select PINCTRL
-	select PM_GENERIC_DOMAINS if PM
-	select SH_CLK_CPG
-	select SPARSE_IRQ
-	help
-	  Support for Renesas ARM SoC platforms using a non-multiplatform
-	  kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car
-	  and RZ families.
-
 config ARCH_RPC
 	bool "RiscPC"
 	select ARCH_ACORN
@@ -1534,7 +1512,6 @@ config HZ_FIXED
 	default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
 		ARCH_S5PV210 || ARCH_EXYNOS4
 	default 128 if SOC_AT91RM9200
-	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
 	default 0
 
 choice
@@ -1752,8 +1729,7 @@ config ARM_MODULE_PLTS
 source "mm/Kconfig"
 
 config FORCE_MAX_ZONEORDER
-	int "Maximum zone order" if ARCH_SHMOBILE_LEGACY
-	range 11 64 if ARCH_SHMOBILE_LEGACY
+	int "Maximum zone order"
 	default "12" if SOC_AM33XX
 	default "9" if SA1111 || ARCH_EFM32
 	default "11"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 0cfd7f947f6b..40a3c25c1e0d 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1621,8 +1621,7 @@ config DEBUG_UNCOMPRESS
 config UNCOMPRESS_INCLUDE
 	string
 	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
-					PLAT_SAMSUNG || ARM_SINGLE_ARMV7M || \
-					ARCH_SHMOBILE_LEGACY
+					PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
 	default "mach/uncompress.h"
 
 config EARLY_PRINTK
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 61a59b18e9d6..7f2e05304d3d 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -99,29 +99,6 @@ config ARCH_SH73A0
 comment "Renesas ARM SoCs System Configuration"
 endif
 
-if ARCH_SHMOBILE_LEGACY
-
-comment "Renesas ARM SoCs System Type"
-
-config ARCH_R8A7779
-	bool "R-Car H1 (R8A77790)"
-	select ARCH_RCAR_GEN1
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-
-comment "Renesas ARM SoCs System Configuration"
-
-config CPU_HAS_INTEVT
-        bool
-	default y
-
-config SH_CLK_CPG
-	bool
-
-source "drivers/sh/Kconfig"
-
-endif
-
 if ARCH_SHMOBILE
 
 menu "Timer and clock configuration"
-- 
2.1.4

[PATCH 16/21] ARM: shmobile: bockw: remove legacy defconfig

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Obsoleted by removal of legacy platform.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/configs/bockw_defconfig | 133 ---------------------------------------
 1 file changed, 133 deletions(-)
 delete mode 100644 arch/arm/configs/bockw_defconfig

diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig
deleted file mode 100644
index 3125e00f05ab..000000000000
--- a/arch/arm/configs/bockw_defconfig
+++ /dev/null
@@ -1,133 +0,0 @@
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-CONFIG_KERNEL_LZMA=y
-CONFIG_NO_HZ=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT\x16
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE_LEGACY=y
-CONFIG_ARCH_R8A7778=y
-CONFIG_MACH_BOCKW=y
-CONFIG_MEMORY_START=0x60000000
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_SHMOBILE_TIMER_HZ\x1024
-# CONFIG_SH_TIMER_CMT is not set
-# CONFIG_EM_TIMER_STI is not set
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_458693=y
-CONFIG_ARM_ERRATA_460075=y
-CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_VFP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-# CONFIG_NET_CADENCE is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_I2C=y
-CONFIG_I2C_RCAR=y
-CONFIG_GPIO_RCAR=y
-CONFIG_REGULATOR=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=y
-CONFIG_VIDEO_RCAR_VIN=y
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-CONFIG_VIDEO_ML86V7667=y
-CONFIG_SPI=y
-CONFIG_SPI_SH_HSPI=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_RCAR=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_RCAR_PHY=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RX8581=y
-CONFIG_DMADEVICES=y
-CONFIG_RCAR_HPB_DMAE=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_SWAP=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_AVERAGE=y
-- 
2.1.4

[PATCH 16/21] ARM: shmobile: bockw: remove legacy defconfig

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Obsoleted by removal of legacy platform.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/configs/bockw_defconfig | 133 ---------------------------------------
 1 file changed, 133 deletions(-)
 delete mode 100644 arch/arm/configs/bockw_defconfig

diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig
deleted file mode 100644
index 3125e00f05ab..000000000000
--- a/arch/arm/configs/bockw_defconfig
+++ /dev/null
@@ -1,133 +0,0 @@
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-CONFIG_KERNEL_LZMA=y
-CONFIG_NO_HZ=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE_LEGACY=y
-CONFIG_ARCH_R8A7778=y
-CONFIG_MACH_BOCKW=y
-CONFIG_MEMORY_START=0x60000000
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_SHMOBILE_TIMER_HZ=1024
-# CONFIG_SH_TIMER_CMT is not set
-# CONFIG_EM_TIMER_STI is not set
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_458693=y
-CONFIG_ARM_ERRATA_460075=y
-CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_VFP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-# CONFIG_NET_CADENCE is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_I2C=y
-CONFIG_I2C_RCAR=y
-CONFIG_GPIO_RCAR=y
-CONFIG_REGULATOR=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=y
-CONFIG_VIDEO_RCAR_VIN=y
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-CONFIG_VIDEO_ML86V7667=y
-CONFIG_SPI=y
-CONFIG_SPI_SH_HSPI=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_RCAR=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_RCAR_PHY=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RX8581=y
-CONFIG_DMADEVICES=y
-CONFIG_RCAR_HPB_DMAE=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_SWAP=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_AVERAGE=y
-- 
2.1.4

[PATCH 17/21] MAINTAINERS: remove references to dropped marzen and bockw defconfigs

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 MAINTAINERS | 2 --
 1 file changed, 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 7ba7ab749c85..803c91ed3eec 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1485,8 +1485,6 @@ F:	arch/arm/boot/dts/emev2*
 F:	arch/arm/boot/dts/r7s*
 F:	arch/arm/boot/dts/r8a*
 F:	arch/arm/boot/dts/sh*
-F:	arch/arm/configs/bockw_defconfig
-F:	arch/arm/configs/marzen_defconfig
 F:	arch/arm/configs/shmobile_defconfig
 F:	arch/arm/include/debug/renesas-scif.S
 F:	arch/arm/mach-shmobile/
-- 
2.1.4

[PATCH 17/21] MAINTAINERS: remove references to dropped marzen and bockw defconfigs

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 MAINTAINERS | 2 --
 1 file changed, 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 7ba7ab749c85..803c91ed3eec 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1485,8 +1485,6 @@ F:	arch/arm/boot/dts/emev2*
 F:	arch/arm/boot/dts/r7s*
 F:	arch/arm/boot/dts/r8a*
 F:	arch/arm/boot/dts/sh*
-F:	arch/arm/configs/bockw_defconfig
-F:	arch/arm/configs/marzen_defconfig
 F:	arch/arm/configs/shmobile_defconfig
 F:	arch/arm/include/debug/renesas-scif.S
 F:	arch/arm/mach-shmobile/
-- 
2.1.4

[PATCH 18/21] ARM: shmobile: bockw: remove legacy DTB build target

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Obsoleted by removal of legacy platform.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/Makefile | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index ad74cf99bc1f..08f85bcc7da7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -522,8 +522,6 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
 	s5pv210-smdkc110.dtb \
 	s5pv210-smdkv210.dtb \
 	s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
-	r8a7778-bockw.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	emev2-kzm9d.dtb \
 	r7s72100-genmai.dtb \
-- 
2.1.4

[PATCH 18/21] ARM: shmobile: bockw: remove legacy DTB build target

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Obsoleted by removal of legacy platform.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/Makefile | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index ad74cf99bc1f..08f85bcc7da7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -522,8 +522,6 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
 	s5pv210-smdkc110.dtb \
 	s5pv210-smdkv210.dtb \
 	s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
-	r8a7778-bockw.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	emev2-kzm9d.dtb \
 	r7s72100-genmai.dtb \
-- 
2.1.4

[PATCH 19/21] ARM: shmobile: Kconfig: remove unused SHMOBILE_TIMER_HZ section

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Obsoleted by removal of legacy platforms.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig | 20 --------------------
 1 file changed, 20 deletions(-)

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 7f2e05304d3d..88734a5e10ca 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -98,23 +98,3 @@ config ARCH_SH73A0
 
 comment "Renesas ARM SoCs System Configuration"
 endif
-
-if ARCH_SHMOBILE
-
-menu "Timer and clock configuration"
-
-config SHMOBILE_TIMER_HZ
-	int "Kernel HZ (jiffies per second)"
-	range 32 1024
-	default "128"
-	help
-	  Allows the configuration of the timer frequency. It is customary
-	  to have the timer interrupt run at 1000 Hz or 100 Hz, but in the
-	  case of low timer frequencies other values may be more suitable.
-	  Renesas ARM SoC systems using a 32768 Hz RCLK for clock events may
-	  want to select a HZ value such as 128 that can evenly divide RCLK.
-	  A HZ value that does not divide evenly may cause timer drift.
-
-endmenu
-
-endif
-- 
2.1.4

[PATCH 19/21] ARM: shmobile: Kconfig: remove unused SHMOBILE_TIMER_HZ section

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Obsoleted by removal of legacy platforms.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig | 20 --------------------
 1 file changed, 20 deletions(-)

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 7f2e05304d3d..88734a5e10ca 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -98,23 +98,3 @@ config ARCH_SH73A0
 
 comment "Renesas ARM SoCs System Configuration"
 endif
-
-if ARCH_SHMOBILE
-
-menu "Timer and clock configuration"
-
-config SHMOBILE_TIMER_HZ
-	int "Kernel HZ (jiffies per second)"
-	range 32 1024
-	default "128"
-	help
-	  Allows the configuration of the timer frequency. It is customary
-	  to have the timer interrupt run at 1000 Hz or 100 Hz, but in the
-	  case of low timer frequencies other values may be more suitable.
-	  Renesas ARM SoC systems using a 32768 Hz RCLK for clock events may
-	  want to select a HZ value such as 128 that can evenly divide RCLK.
-	  A HZ value that does not divide evenly may cause timer drift.
-
-endmenu
-
-endif
-- 
2.1.4

[PATCH 20/21] ARM: shmobile: remove Makefile.boot

[Simon Horman]

Now that the only multiplatform boot is supported for all
shmobile platforms Makefile.boot may be removed.

This seems correct to me given:
* Setting MACHINE to no value in arch/arm/Makefile
  if CONFIG_ARCH_MULTIPLATFORM is set
* Not including Makefile.boot in arch/arm/boot/Makefile
  if MACHINE has no value

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/mach-shmobile/Makefile.boot | 0
 1 file changed, 0 insertions(+), 0 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/Makefile.boot

diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
deleted file mode 100644
index e69de29bb2d1..000000000000
-- 
2.1.4

[PATCH 20/21] ARM: shmobile: remove Makefile.boot

[Simon Horman]

Now that the only multiplatform boot is supported for all
shmobile platforms Makefile.boot may be removed.

This seems correct to me given:
* Setting MACHINE to no value in arch/arm/Makefile
  if CONFIG_ARCH_MULTIPLATFORM is set
* Not including Makefile.boot in arch/arm/boot/Makefile
  if MACHINE has no value

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/mach-shmobile/Makefile.boot | 0
 1 file changed, 0 insertions(+), 0 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/Makefile.boot

diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
deleted file mode 100644
index e69de29bb2d1..000000000000
-- 
2.1.4

[PATCH 21/21] ARM: shmobile: Remove legacy clock support leftovers

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The shmobile_clk_init() function has been removed and the linux/sh_clk.h
header doesn't need to be included anymore.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/common.h  | 2 --
 arch/arm/mach-shmobile/r8a7779.h | 2 --
 2 files changed, 4 deletions(-)

diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index 0833a6ed02e4..9cb11215ceba 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -15,8 +15,6 @@ extern void shmobile_boot_scu(void);
 extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus);
 extern void shmobile_smp_scu_cpu_die(unsigned int cpu);
 extern int shmobile_smp_scu_cpu_kill(unsigned int cpu);
-struct clk;
-extern int shmobile_clk_init(void);
 extern struct platform_suspend_ops shmobile_suspend_ops;
 
 #ifdef CONFIG_SUSPEND
diff --git a/arch/arm/mach-shmobile/r8a7779.h b/arch/arm/mach-shmobile/r8a7779.h
index db303f76704e..aad833a8f0b8 100644
--- a/arch/arm/mach-shmobile/r8a7779.h
+++ b/arch/arm/mach-shmobile/r8a7779.h
@@ -1,8 +1,6 @@
 #ifndef __ASM_R8A7779_H__
 #define __ASM_R8A7779_H__
 
-#include <linux/sh_clk.h>
-
 extern void r8a7779_pm_init(void);
 
 #ifdef CONFIG_PM
-- 
2.1.4

[PATCH 21/21] ARM: shmobile: Remove legacy clock support leftovers

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The shmobile_clk_init() function has been removed and the linux/sh_clk.h
header doesn't need to be included anymore.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/common.h  | 2 --
 arch/arm/mach-shmobile/r8a7779.h | 2 --
 2 files changed, 4 deletions(-)

diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index 0833a6ed02e4..9cb11215ceba 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -15,8 +15,6 @@ extern void shmobile_boot_scu(void);
 extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus);
 extern void shmobile_smp_scu_cpu_die(unsigned int cpu);
 extern int shmobile_smp_scu_cpu_kill(unsigned int cpu);
-struct clk;
-extern int shmobile_clk_init(void);
 extern struct platform_suspend_ops shmobile_suspend_ops;
 
 #ifdef CONFIG_SUSPEND
diff --git a/arch/arm/mach-shmobile/r8a7779.h b/arch/arm/mach-shmobile/r8a7779.h
index db303f76704e..aad833a8f0b8 100644
--- a/arch/arm/mach-shmobile/r8a7779.h
+++ b/arch/arm/mach-shmobile/r8a7779.h
@@ -1,8 +1,6 @@
 #ifndef __ASM_R8A7779_H__
 #define __ASM_R8A7779_H__
 
-#include <linux/sh_clk.h>
-
 extern void r8a7779_pm_init(void);
 
 #ifdef CONFIG_PM
-- 
2.1.4

Re: [GIT PULL] Renesas ARM Based SoC Cleanup for v4.4

[Arnd Bergmann]

On Thursday 17 September 2015 17:59:33 Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these Renesas ARM based SoC cleanup for v4.4.
> 
>  24 files changed, 4 insertions(+), 2687 deletions(-)
> 
> Is a pleasing diffstat if I do say so myself.
> 
> Of particular note the last legacy board code for Renesas ARM based SoCs,
> that of the bockw board, is removed in this pull request.
> 
> 

After a long delay in response, I've merged it now into next/cleanup.

So the transition is complete and you beat me with the multiplatform
conversion that I have pending for the other ARMv7 platforms, nice work!

	Arnd


I've used the opportunity to look for any remaining code that you may
have missed, by tracking symbols that are defined globally but never used
in mach-shmobile, and didn't find much (which is good).

Could you have a look at the patch below and integrate the parts that
make sense to you?

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index 4e54512bee30..bcf4cc51b926 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -170,7 +170,7 @@ static inline void cpu_enter_lowpower_a15(void)
 	dsb();
 }
 
-void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu)
+static void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu)
 {
 
 	/* Select next sleep mode using the APMU */
diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c
index 47a862e7f8ba..61ed75ce7782 100644
--- a/arch/arm/mach-shmobile/pm-r8a7779.c
+++ b/arch/arm/mach-shmobile/pm-r8a7779.c
@@ -30,19 +30,6 @@
 #define SYSCIER 0x0c
 #define SYSCIMR 0x10
 
-struct r8a7779_pm_domain {
-	struct generic_pm_domain genpd;
-	struct rcar_sysc_ch ch;
-};
-
-static inline
-const struct rcar_sysc_ch *to_r8a7779_ch(struct generic_pm_domain *d)
-{
-	return &container_of(d, struct r8a7779_pm_domain, genpd)->ch;
-}
-
-#if defined(CONFIG_PM) || defined(CONFIG_SMP)
-
 static void __init r8a7779_sysc_init(void)
 {
 	void __iomem *base = rcar_sysc_init(0xffd85000);
@@ -52,92 +39,10 @@ static void __init r8a7779_sysc_init(void)
 	iowrite32(0, base + SYSCIMR);
 }
 
-#else /* CONFIG_PM || CONFIG_SMP */
-
-static inline void r8a7779_sysc_init(void) {}
-
-#endif /* CONFIG_PM || CONFIG_SMP */
-
-#ifdef CONFIG_PM
-
-static int pd_power_down(struct generic_pm_domain *genpd)
-{
-	return rcar_sysc_power_down(to_r8a7779_ch(genpd));
-}
-
-static int pd_power_up(struct generic_pm_domain *genpd)
-{
-	return rcar_sysc_power_up(to_r8a7779_ch(genpd));
-}
-
-static bool pd_is_off(struct generic_pm_domain *genpd)
-{
-	return rcar_sysc_power_is_off(to_r8a7779_ch(genpd));
-}
-
-static bool pd_active_wakeup(struct device *dev)
-{
-	return true;
-}
-
-static void r8a7779_init_pm_domain(struct r8a7779_pm_domain *r8a7779_pd)
-{
-	struct generic_pm_domain *genpd = &r8a7779_pd->genpd;
-
-	pm_genpd_init(genpd, NULL, false);
-	genpd->dev_ops.active_wakeup = pd_active_wakeup;
-	genpd->power_off = pd_power_down;
-	genpd->power_on = pd_power_up;
-
-	if (pd_is_off(&r8a7779_pd->genpd))
-		pd_power_up(&r8a7779_pd->genpd);
-}
-
-static struct r8a7779_pm_domain r8a7779_pm_domains[] = {
-	{
-		.genpd.name = "SH4A",
-		.ch = {
-			.chan_offs = 0x80, /* PWRSR1 .. PWRER1 */
-			.isr_bit = 16, /* SH4A */
-		},
-	},
-	{
-		.genpd.name = "SGX",
-		.ch = {
-			.chan_offs = 0xc0, /* PWRSR2 .. PWRER2 */
-			.isr_bit = 20, /* SGX */
-		},
-	},
-	{
-		.genpd.name = "VDP1",
-		.ch = {
-			.chan_offs = 0x100, /* PWRSR3 .. PWRER3 */
-			.isr_bit = 21, /* VDP */
-		},
-	},
-	{
-		.genpd.name = "IMPX3",
-		.ch = {
-			.chan_offs = 0x140, /* PWRSR4 .. PWRER4 */
-			.isr_bit = 24, /* IMP */
-		},
-	},
-};
-
-void __init r8a7779_init_pm_domains(void)
-{
-	int j;
-
-	for (j = 0; j < ARRAY_SIZE(r8a7779_pm_domains); j++)
-		r8a7779_init_pm_domain(&r8a7779_pm_domains[j]);
-}
-
-#endif /* CONFIG_PM */
-
 void __init r8a7779_pm_init(void)
 {
 	static int once;
 
-	if (!once++)
+	if (!once++ && (IS_ENABLED(CONFIG_PM) || IS_ENABLED(CONFIG_SMP)))
 		r8a7779_sysc_init();
 }
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index b0c9986d022d..0ab9d3272875 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -42,7 +42,8 @@ static void __init r8a7778_timer_init(void)
 
 #define INT2NTSR0	0x00018 /* 0xfe700018 */
 #define INT2NTSR1	0x0002c /* 0xfe70002c */
-void __init r8a7778_init_irq_dt(void)
+
+static void __init r8a7778_init_irq_dt(void)
 {
 	void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
 
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index aa3339258d9c..5a2d8a37deaa 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -182,7 +182,7 @@ static int __init rcar_gen2_scan_mem(unsigned long node, const char *uname,
 	return 0;
 }
 
-struct cma *rcar_gen2_dma_contiguous;
+static struct cma *rcar_gen2_dma_contiguous;
 
 void __init rcar_gen2_reserve(void)
 {

[GIT PULL] Renesas ARM Based SoC Cleanup for v4.4

[Arnd Bergmann]

On Thursday 17 September 2015 17:59:33 Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these Renesas ARM based SoC cleanup for v4.4.
> 
>  24 files changed, 4 insertions(+), 2687 deletions(-)
> 
> Is a pleasing diffstat if I do say so myself.
> 
> Of particular note the last legacy board code for Renesas ARM based SoCs,
> that of the bockw board, is removed in this pull request.
> 
> 

After a long delay in response, I've merged it now into next/cleanup.

So the transition is complete and you beat me with the multiplatform
conversion that I have pending for the other ARMv7 platforms, nice work!

	Arnd


I've used the opportunity to look for any remaining code that you may
have missed, by tracking symbols that are defined globally but never used
in mach-shmobile, and didn't find much (which is good).

Could you have a look at the patch below and integrate the parts that
make sense to you?

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index 4e54512bee30..bcf4cc51b926 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -170,7 +170,7 @@ static inline void cpu_enter_lowpower_a15(void)
 	dsb();
 }
 
-void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu)
+static void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu)
 {
 
 	/* Select next sleep mode using the APMU */
diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c
index 47a862e7f8ba..61ed75ce7782 100644
--- a/arch/arm/mach-shmobile/pm-r8a7779.c
+++ b/arch/arm/mach-shmobile/pm-r8a7779.c
@@ -30,19 +30,6 @@
 #define SYSCIER 0x0c
 #define SYSCIMR 0x10
 
-struct r8a7779_pm_domain {
-	struct generic_pm_domain genpd;
-	struct rcar_sysc_ch ch;
-};
-
-static inline
-const struct rcar_sysc_ch *to_r8a7779_ch(struct generic_pm_domain *d)
-{
-	return &container_of(d, struct r8a7779_pm_domain, genpd)->ch;
-}
-
-#if defined(CONFIG_PM) || defined(CONFIG_SMP)
-
 static void __init r8a7779_sysc_init(void)
 {
 	void __iomem *base = rcar_sysc_init(0xffd85000);
@@ -52,92 +39,10 @@ static void __init r8a7779_sysc_init(void)
 	iowrite32(0, base + SYSCIMR);
 }
 
-#else /* CONFIG_PM || CONFIG_SMP */
-
-static inline void r8a7779_sysc_init(void) {}
-
-#endif /* CONFIG_PM || CONFIG_SMP */
-
-#ifdef CONFIG_PM
-
-static int pd_power_down(struct generic_pm_domain *genpd)
-{
-	return rcar_sysc_power_down(to_r8a7779_ch(genpd));
-}
-
-static int pd_power_up(struct generic_pm_domain *genpd)
-{
-	return rcar_sysc_power_up(to_r8a7779_ch(genpd));
-}
-
-static bool pd_is_off(struct generic_pm_domain *genpd)
-{
-	return rcar_sysc_power_is_off(to_r8a7779_ch(genpd));
-}
-
-static bool pd_active_wakeup(struct device *dev)
-{
-	return true;
-}
-
-static void r8a7779_init_pm_domain(struct r8a7779_pm_domain *r8a7779_pd)
-{
-	struct generic_pm_domain *genpd = &r8a7779_pd->genpd;
-
-	pm_genpd_init(genpd, NULL, false);
-	genpd->dev_ops.active_wakeup = pd_active_wakeup;
-	genpd->power_off = pd_power_down;
-	genpd->power_on = pd_power_up;
-
-	if (pd_is_off(&r8a7779_pd->genpd))
-		pd_power_up(&r8a7779_pd->genpd);
-}
-
-static struct r8a7779_pm_domain r8a7779_pm_domains[] = {
-	{
-		.genpd.name = "SH4A",
-		.ch = {
-			.chan_offs = 0x80, /* PWRSR1 .. PWRER1 */
-			.isr_bit = 16, /* SH4A */
-		},
-	},
-	{
-		.genpd.name = "SGX",
-		.ch = {
-			.chan_offs = 0xc0, /* PWRSR2 .. PWRER2 */
-			.isr_bit = 20, /* SGX */
-		},
-	},
-	{
-		.genpd.name = "VDP1",
-		.ch = {
-			.chan_offs = 0x100, /* PWRSR3 .. PWRER3 */
-			.isr_bit = 21, /* VDP */
-		},
-	},
-	{
-		.genpd.name = "IMPX3",
-		.ch = {
-			.chan_offs = 0x140, /* PWRSR4 .. PWRER4 */
-			.isr_bit = 24, /* IMP */
-		},
-	},
-};
-
-void __init r8a7779_init_pm_domains(void)
-{
-	int j;
-
-	for (j = 0; j < ARRAY_SIZE(r8a7779_pm_domains); j++)
-		r8a7779_init_pm_domain(&r8a7779_pm_domains[j]);
-}
-
-#endif /* CONFIG_PM */
-
 void __init r8a7779_pm_init(void)
 {
 	static int once;
 
-	if (!once++)
+	if (!once++ && (IS_ENABLED(CONFIG_PM) || IS_ENABLED(CONFIG_SMP)))
 		r8a7779_sysc_init();
 }
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index b0c9986d022d..0ab9d3272875 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -42,7 +42,8 @@ static void __init r8a7778_timer_init(void)
 
 #define INT2NTSR0	0x00018 /* 0xfe700018 */
 #define INT2NTSR1	0x0002c /* 0xfe70002c */
-void __init r8a7778_init_irq_dt(void)
+
+static void __init r8a7778_init_irq_dt(void)
 {
 	void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
 
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index aa3339258d9c..5a2d8a37deaa 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -182,7 +182,7 @@ static int __init rcar_gen2_scan_mem(unsigned long node, const char *uname,
 	return 0;
 }
 
-struct cma *rcar_gen2_dma_contiguous;
+static struct cma *rcar_gen2_dma_contiguous;
 
 void __init rcar_gen2_reserve(void)
 {

Re: [GIT PULL] Renesas ARM Based SoC Cleanup for v4.4

[Geert Uytterhoeven]

Hi Arnd,

On Tue, Oct 6, 2015 at 3:58 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Thursday 17 September 2015 17:59:33 Simon Horman wrote:
>> Please consider these Renesas ARM based SoC cleanup for v4.4.
>>
>>  24 files changed, 4 insertions(+), 2687 deletions(-)
>>
>> Is a pleasing diffstat if I do say so myself.
>>
>> Of particular note the last legacy board code for Renesas ARM based SoCs,
>> that of the bockw board, is removed in this pull request.
>
> After a long delay in response, I've merged it now into next/cleanup.
>
> So the transition is complete and you beat me with the multiplatform
> conversion that I have pending for the other ARMv7 platforms, nice work!

Thanks for pulling!

Now I can start out sending my platform data removal series...

> I've used the opportunity to look for any remaining code that you may
> have missed, by tracking symbols that are defined globally but never used
> in mach-shmobile, and didn't find much (which is good).
>
> Could you have a look at the patch below and integrate the parts that
> make sense to you?

I think most of this has already been fixed in Simon's next branch in the mean
time.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[GIT PULL] Renesas ARM Based SoC Cleanup for v4.4

[Geert Uytterhoeven]

Hi Arnd,

On Tue, Oct 6, 2015 at 3:58 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Thursday 17 September 2015 17:59:33 Simon Horman wrote:
>> Please consider these Renesas ARM based SoC cleanup for v4.4.
>>
>>  24 files changed, 4 insertions(+), 2687 deletions(-)
>>
>> Is a pleasing diffstat if I do say so myself.
>>
>> Of particular note the last legacy board code for Renesas ARM based SoCs,
>> that of the bockw board, is removed in this pull request.
>
> After a long delay in response, I've merged it now into next/cleanup.
>
> So the transition is complete and you beat me with the multiplatform
> conversion that I have pending for the other ARMv7 platforms, nice work!

Thanks for pulling!

Now I can start out sending my platform data removal series...

> I've used the opportunity to look for any remaining code that you may
> have missed, by tracking symbols that are defined globally but never used
> in mach-shmobile, and didn't find much (which is good).
>
> Could you have a look at the patch below and integrate the parts that
> make sense to you?

I think most of this has already been fixed in Simon's next branch in the mean
time.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [GIT PULL] Renesas ARM Based SoC Cleanup for v4.4

[Arnd Bergmann]

On Tuesday 06 October 2015 17:47:37 Geert Uytterhoeven wrote:
> Hi Arnd,
> 
> On Tue, Oct 6, 2015 at 3:58 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> > On Thursday 17 September 2015 17:59:33 Simon Horman wrote:
> >> Please consider these Renesas ARM based SoC cleanup for v4.4.
> >>
> >>  24 files changed, 4 insertions(+), 2687 deletions(-)
> >>
> >> Is a pleasing diffstat if I do say so myself.
> >>
> >> Of particular note the last legacy board code for Renesas ARM based SoCs,
> >> that of the bockw board, is removed in this pull request.
> >
> > After a long delay in response, I've merged it now into next/cleanup.
> >
> > So the transition is complete and you beat me with the multiplatform
> > conversion that I have pending for the other ARMv7 platforms, nice work!
> 
> Thanks for pulling!
> 
> Now I can start out sending my platform data removal series...

Ok, cool.

I don't think that there is generally a need to wait before sending
stuff out that depends on pull requests to get merged.

> > I've used the opportunity to look for any remaining code that you may
> > have missed, by tracking symbols that are defined globally but never used
> > in mach-shmobile, and didn't find much (which is good).
> >
> > Could you have a look at the patch below and integrate the parts that
> > make sense to you?
> 
> I think most of this has already been fixed in Simon's next branch in the mean
> time.

Ok, thanks for taking a look.

	Arnd

[GIT PULL] Renesas ARM Based SoC Cleanup for v4.4

[Arnd Bergmann]

On Tuesday 06 October 2015 17:47:37 Geert Uytterhoeven wrote:
> Hi Arnd,
> 
> On Tue, Oct 6, 2015 at 3:58 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> > On Thursday 17 September 2015 17:59:33 Simon Horman wrote:
> >> Please consider these Renesas ARM based SoC cleanup for v4.4.
> >>
> >>  24 files changed, 4 insertions(+), 2687 deletions(-)
> >>
> >> Is a pleasing diffstat if I do say so myself.
> >>
> >> Of particular note the last legacy board code for Renesas ARM based SoCs,
> >> that of the bockw board, is removed in this pull request.
> >
> > After a long delay in response, I've merged it now into next/cleanup.
> >
> > So the transition is complete and you beat me with the multiplatform
> > conversion that I have pending for the other ARMv7 platforms, nice work!
> 
> Thanks for pulling!
> 
> Now I can start out sending my platform data removal series...

Ok, cool.

I don't think that there is generally a need to wait before sending
stuff out that depends on pull requests to get merged.

> > I've used the opportunity to look for any remaining code that you may
> > have missed, by tracking symbols that are defined globally but never used
> > in mach-shmobile, and didn't find much (which is good).
> >
> > Could you have a look at the patch below and integrate the parts that
> > make sense to you?
> 
> I think most of this has already been fixed in Simon's next branch in the mean
> time.

Ok, thanks for taking a look.

	Arnd

Re: [GIT PULL] Renesas ARM Based SoC Cleanup for v4.4

[Geert Uytterhoeven]

Hi Arnd,

On Tue, Oct 6, 2015 at 8:42 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Tuesday 06 October 2015 17:47:37 Geert Uytterhoeven wrote:
>> On Tue, Oct 6, 2015 at 3:58 PM, Arnd Bergmann <arnd@arndb.de> wrote:
>> > On Thursday 17 September 2015 17:59:33 Simon Horman wrote:
>> >> Please consider these Renesas ARM based SoC cleanup for v4.4.
>> >>
>> >>  24 files changed, 4 insertions(+), 2687 deletions(-)
>> >>
>> >> Is a pleasing diffstat if I do say so myself.
>> >>
>> >> Of particular note the last legacy board code for Renesas ARM based SoCs,
>> >> that of the bockw board, is removed in this pull request.
>> >
>> > After a long delay in response, I've merged it now into next/cleanup.
>> >
>> > So the transition is complete and you beat me with the multiplatform
>> > conversion that I have pending for the other ARMv7 platforms, nice work!
>>
>> Thanks for pulling!
>>
>> Now I can start out sending my platform data removal series...
>
> Ok, cool.
>
> I don't think that there is generally a need to wait before sending
> stuff out that depends on pull requests to get merged.

Seems like several subsystem maintainers are uncomfortable with taking
these patches even after the legacy removal has hit arm-soc/for-next...

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[GIT PULL] Renesas ARM Based SoC Cleanup for v4.4

[Geert Uytterhoeven]

Hi Arnd,

On Tue, Oct 6, 2015 at 8:42 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Tuesday 06 October 2015 17:47:37 Geert Uytterhoeven wrote:
>> On Tue, Oct 6, 2015 at 3:58 PM, Arnd Bergmann <arnd@arndb.de> wrote:
>> > On Thursday 17 September 2015 17:59:33 Simon Horman wrote:
>> >> Please consider these Renesas ARM based SoC cleanup for v4.4.
>> >>
>> >>  24 files changed, 4 insertions(+), 2687 deletions(-)
>> >>
>> >> Is a pleasing diffstat if I do say so myself.
>> >>
>> >> Of particular note the last legacy board code for Renesas ARM based SoCs,
>> >> that of the bockw board, is removed in this pull request.
>> >
>> > After a long delay in response, I've merged it now into next/cleanup.
>> >
>> > So the transition is complete and you beat me with the multiplatform
>> > conversion that I have pending for the other ARMv7 platforms, nice work!
>>
>> Thanks for pulling!
>>
>> Now I can start out sending my platform data removal series...
>
> Ok, cool.
>
> I don't think that there is generally a need to wait before sending
> stuff out that depends on pull requests to get merged.

Seems like several subsystem maintainers are uncomfortable with taking
these patches even after the legacy removal has hit arm-soc/for-next...

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [GIT PULL] Renesas ARM Based SoC Cleanup for v4.4

[Arnd Bergmann]

On Monday 12 October 2015 09:12:15 Geert Uytterhoeven wrote:
> On Tue, Oct 6, 2015 at 8:42 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> > On Tuesday 06 October 2015 17:47:37 Geert Uytterhoeven wrote:
> >>
> >> Now I can start out sending my platform data removal series...
> >
> > Ok, cool.
> >
> > I don't think that there is generally a need to wait before sending
> > stuff out that depends on pull requests to get merged.
> 
> Seems like several subsystem maintainers are uncomfortable with taking
> these patches even after the legacy removal has hit arm-soc/for-next...

Ah, I was misunderstanding you here. I thought these were also patches
for arm-soc.

	Arnd

[GIT PULL] Renesas ARM Based SoC Cleanup for v4.4

[Arnd Bergmann]

On Monday 12 October 2015 09:12:15 Geert Uytterhoeven wrote:
> On Tue, Oct 6, 2015 at 8:42 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> > On Tuesday 06 October 2015 17:47:37 Geert Uytterhoeven wrote:
> >>
> >> Now I can start out sending my platform data removal series...
> >
> > Ok, cool.
> >
> > I don't think that there is generally a need to wait before sending
> > stuff out that depends on pull requests to get merged.
> 
> Seems like several subsystem maintainers are uncomfortable with taking
> these patches even after the legacy removal has hit arm-soc/for-next...

Ah, I was misunderstanding you here. I thought these were also patches
for arm-soc.

	Arnd

[GIT PULL] Renesas ARM Based SoC Cleanup for v4.5

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC cleanup for v4.5.

This pull request includes some minor cleanups and
introduces ARCH_RENESAS as a firs step to migrating away
from ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI.


The following changes since commit 8005c49d9aea74d382f474ce11afbbc7d7130bec:

  Linux 4.4-rc1 (2015-11-15 17:00:27 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v4.5

for you to fetch changes up to c8cd74a1468ffe20db3ddc6e6f408d5377f9be43:

  ARM: shmobile: Remove legacy mach/irqs.h (2015-11-19 16:28:01 -0800)

----------------------------------------------------------------
Renesas ARM Based SoC Cleanup for v4.5

* Remove now unnecessary header
* Introduce ARCH_RENESAS
* Remove unmaintened URL from MAINTAINERS

----------------------------------------------------------------
Laurent Pinchart (1):
      ARM: shmobile: Remove legacy mach/irqs.h

Simon Horman (2):
      MAINTAINERS: Remove link to oss.renesas.com which is closed
      ARM: shmobile: Introduce ARCH_RENESAS

 MAINTAINERS                                |  1 -
 arch/arm/configs/multi_v7_defconfig        |  2 +-
 arch/arm/configs/shmobile_defconfig        |  2 +-
 arch/arm/mach-shmobile/Kconfig             | 10 +++++++---
 arch/arm/mach-shmobile/include/mach/irqs.h | 10 ----------
 arch/arm/mach-shmobile/irqs.h              | 15 ---------------
 arch/arm/mach-shmobile/setup-r8a7778.c     |  1 -
 7 files changed, 9 insertions(+), 32 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/include/mach/irqs.h
 delete mode 100644 arch/arm/mach-shmobile/irqs.h

[GIT PULL] Renesas ARM Based SoC Cleanup for v4.5

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC cleanup for v4.5.

This pull request includes some minor cleanups and
introduces ARCH_RENESAS as a firs step to migrating away
from ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI.


The following changes since commit 8005c49d9aea74d382f474ce11afbbc7d7130bec:

  Linux 4.4-rc1 (2015-11-15 17:00:27 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v4.5

for you to fetch changes up to c8cd74a1468ffe20db3ddc6e6f408d5377f9be43:

  ARM: shmobile: Remove legacy mach/irqs.h (2015-11-19 16:28:01 -0800)

----------------------------------------------------------------
Renesas ARM Based SoC Cleanup for v4.5

* Remove now unnecessary header
* Introduce ARCH_RENESAS
* Remove unmaintened URL from MAINTAINERS

----------------------------------------------------------------
Laurent Pinchart (1):
      ARM: shmobile: Remove legacy mach/irqs.h

Simon Horman (2):
      MAINTAINERS: Remove link to oss.renesas.com which is closed
      ARM: shmobile: Introduce ARCH_RENESAS

 MAINTAINERS                                |  1 -
 arch/arm/configs/multi_v7_defconfig        |  2 +-
 arch/arm/configs/shmobile_defconfig        |  2 +-
 arch/arm/mach-shmobile/Kconfig             | 10 +++++++---
 arch/arm/mach-shmobile/include/mach/irqs.h | 10 ----------
 arch/arm/mach-shmobile/irqs.h              | 15 ---------------
 arch/arm/mach-shmobile/setup-r8a7778.c     |  1 -
 7 files changed, 9 insertions(+), 32 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/include/mach/irqs.h
 delete mode 100644 arch/arm/mach-shmobile/irqs.h

[PATCH 1/3] MAINTAINERS: Remove link to oss.renesas.com which is closed

[Simon Horman]

There doesn't seem much value in keeping this link listed
in the MAINTAINERS file any more.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 MAINTAINERS | 1 -
 1 file changed, 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index e9caa4b28828..bea4c8ba7a80 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1517,7 +1517,6 @@ ARM/SHMOBILE ARM ARCHITECTURE
 M:	Simon Horman <horms@verge.net.au>
 M:	Magnus Damm <magnus.damm@gmail.com>
 L:	linux-sh@vger.kernel.org
-W:	http://oss.renesas.com
 Q:	http://patchwork.kernel.org/project/linux-sh/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
 S:	Supported
-- 
2.1.4

[PATCH 1/3] MAINTAINERS: Remove link to oss.renesas.com which is closed

[Simon Horman]

There doesn't seem much value in keeping this link listed
in the MAINTAINERS file any more.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 MAINTAINERS | 1 -
 1 file changed, 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index e9caa4b28828..bea4c8ba7a80 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1517,7 +1517,6 @@ ARM/SHMOBILE ARM ARCHITECTURE
 M:	Simon Horman <horms@verge.net.au>
 M:	Magnus Damm <magnus.damm@gmail.com>
 L:	linux-sh at vger.kernel.org
-W:	http://oss.renesas.com
 Q:	http://patchwork.kernel.org/project/linux-sh/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
 S:	Supported
-- 
2.1.4

[PATCH 2/3] ARM: shmobile: Introduce ARCH_RENESAS

[Simon Horman]

The purpose of this patch is to start the process of replacing both
ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI with ARCH_RENESAS.

RENESAS seems to be a more appropriate name than SHMOBILE for the majority
of Renesas 32-bit ARM based SoCs. The name is conveniently also (newer)
ARM64 based SoCs.

This patches only addresses 32-bit ARM based SoCs.  Proposed support for
the ARM64 based r8a7795 SoC already uses ARCH_RENESAS which selects
ARCH_SHMOBILE.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/configs/multi_v7_defconfig |  2 +-
 arch/arm/configs/shmobile_defconfig |  2 +-
 arch/arm/mach-shmobile/Kconfig      | 10 +++++++---
 3 files changed, 9 insertions(+), 5 deletions(-)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 69a22fdb52a5..2735bc73b285 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -75,7 +75,7 @@ CONFIG_MACH_SPEAR1340=y
 CONFIG_ARCH_STI=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_EXYNOS5420_MCPM=y
-CONFIG_ARCH_SHMOBILE_MULTI=y
+CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_EMEV2=y
 CONFIG_ARCH_R7S72100=y
 CONFIG_ARCH_R8A73A4=y
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index 3aef019c0de7..cc8ece33a7e3 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -9,7 +9,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
-CONFIG_ARCH_SHMOBILE_MULTI=y
+CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_EMEV2=y
 CONFIG_ARCH_R7S72100=y
 CONFIG_ARCH_R8A73A4=y
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 88734a5e10ca..4ed72b124235 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,6 +1,8 @@
 config ARCH_SHMOBILE
 	bool
-	select ZONE_DMA if ARM_LPAE
+
+config ARCH_SHMOBILE_MULTI
+	bool
 
 config PM_RCAR
 	bool
@@ -29,10 +31,11 @@ config ARCH_RMOBILE
 	select SYS_SUPPORTS_SH_CMT
 	select SYS_SUPPORTS_SH_TMU
 
-menuconfig ARCH_SHMOBILE_MULTI
+menuconfig ARCH_RENESAS
 	bool "Renesas ARM SoCs" if ARCH_MULTI_V7
 	depends on MMU
 	select ARCH_SHMOBILE
+	select ARCH_SHMOBILE_MULTI
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select ARM_GIC
@@ -40,8 +43,9 @@ menuconfig ARCH_SHMOBILE_MULTI
 	select NO_IOPORT_MAP
 	select PINCTRL
 	select ARCH_REQUIRE_GPIOLIB
+	select ZONE_DMA if ARM_LPAE
 
-if ARCH_SHMOBILE_MULTI
+if ARCH_RENESAS
 
 #comment "Renesas ARM SoCs System Type"
 
-- 
2.1.4

[PATCH 2/3] ARM: shmobile: Introduce ARCH_RENESAS

[Simon Horman]

The purpose of this patch is to start the process of replacing both
ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI with ARCH_RENESAS.

RENESAS seems to be a more appropriate name than SHMOBILE for the majority
of Renesas 32-bit ARM based SoCs. The name is conveniently also (newer)
ARM64 based SoCs.

This patches only addresses 32-bit ARM based SoCs.  Proposed support for
the ARM64 based r8a7795 SoC already uses ARCH_RENESAS which selects
ARCH_SHMOBILE.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/configs/multi_v7_defconfig |  2 +-
 arch/arm/configs/shmobile_defconfig |  2 +-
 arch/arm/mach-shmobile/Kconfig      | 10 +++++++---
 3 files changed, 9 insertions(+), 5 deletions(-)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 69a22fdb52a5..2735bc73b285 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -75,7 +75,7 @@ CONFIG_MACH_SPEAR1340=y
 CONFIG_ARCH_STI=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_EXYNOS5420_MCPM=y
-CONFIG_ARCH_SHMOBILE_MULTI=y
+CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_EMEV2=y
 CONFIG_ARCH_R7S72100=y
 CONFIG_ARCH_R8A73A4=y
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index 3aef019c0de7..cc8ece33a7e3 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -9,7 +9,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
-CONFIG_ARCH_SHMOBILE_MULTI=y
+CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_EMEV2=y
 CONFIG_ARCH_R7S72100=y
 CONFIG_ARCH_R8A73A4=y
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 88734a5e10ca..4ed72b124235 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,6 +1,8 @@
 config ARCH_SHMOBILE
 	bool
-	select ZONE_DMA if ARM_LPAE
+
+config ARCH_SHMOBILE_MULTI
+	bool
 
 config PM_RCAR
 	bool
@@ -29,10 +31,11 @@ config ARCH_RMOBILE
 	select SYS_SUPPORTS_SH_CMT
 	select SYS_SUPPORTS_SH_TMU
 
-menuconfig ARCH_SHMOBILE_MULTI
+menuconfig ARCH_RENESAS
 	bool "Renesas ARM SoCs" if ARCH_MULTI_V7
 	depends on MMU
 	select ARCH_SHMOBILE
+	select ARCH_SHMOBILE_MULTI
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select ARM_GIC
@@ -40,8 +43,9 @@ menuconfig ARCH_SHMOBILE_MULTI
 	select NO_IOPORT_MAP
 	select PINCTRL
 	select ARCH_REQUIRE_GPIOLIB
+	select ZONE_DMA if ARM_LPAE
 
-if ARCH_SHMOBILE_MULTI
+if ARCH_RENESAS
 
 #comment "Renesas ARM SoCs System Type"
 
-- 
2.1.4

[PATCH 3/3] ARM: shmobile: Remove legacy mach/irqs.h

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The header isn't needed anymore now that all SoCs use multiplatform
kernels. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/irqs.h | 10 ----------
 arch/arm/mach-shmobile/irqs.h              | 15 ---------------
 arch/arm/mach-shmobile/setup-r8a7778.c     |  1 -
 3 files changed, 26 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/include/mach/irqs.h
 delete mode 100644 arch/arm/mach-shmobile/irqs.h

diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
deleted file mode 100644
index 5aee83f079e2..000000000000
--- a/arch/arm/mach-shmobile/include/mach/irqs.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __ASM_MACH_IRQS_H
-#define __ASM_MACH_IRQS_H
-
-/* Stuck here until drivers/pinctl/sh-pfc gets rid of legacy code */
-
-/* External IRQ pins */
-#define IRQPIN_BASE		2000
-#define irq_pin(nr)		((nr) + IRQPIN_BASE)
-
-#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-shmobile/irqs.h b/arch/arm/mach-shmobile/irqs.h
deleted file mode 100644
index 3070f6d887eb..000000000000
--- a/arch/arm/mach-shmobile/irqs.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __SHMOBILE_IRQS_H
-#define __SHMOBILE_IRQS_H
-
-#include "include/mach/irqs.h"
-
-/* GIC */
-#define gic_spi(nr)		((nr) + 32)
-#define gic_iid(nr)		(nr) /* ICCIAR / interrupt ID */
-
-/* GPIO IRQ */
-#define _GPIO_IRQ_BASE		2500
-#define GPIO_IRQ_BASE(x)	(_GPIO_IRQ_BASE + (32 * x))
-#define GPIO_IRQ(x, y)		(_GPIO_IRQ_BASE + (32 * x) + y)
-
-#endif /* __SHMOBILE_IRQS_H */
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 0ab9d3272875..fab95d1271bc 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -22,7 +22,6 @@
 #include <asm/mach/arch.h>
 
 #include "common.h"
-#include "irqs.h"
 
 #define MODEMR 0xffcc0020
 
-- 
2.1.4

[PATCH 3/3] ARM: shmobile: Remove legacy mach/irqs.h

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The header isn't needed anymore now that all SoCs use multiplatform
kernels. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/irqs.h | 10 ----------
 arch/arm/mach-shmobile/irqs.h              | 15 ---------------
 arch/arm/mach-shmobile/setup-r8a7778.c     |  1 -
 3 files changed, 26 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/include/mach/irqs.h
 delete mode 100644 arch/arm/mach-shmobile/irqs.h

diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
deleted file mode 100644
index 5aee83f079e2..000000000000
--- a/arch/arm/mach-shmobile/include/mach/irqs.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __ASM_MACH_IRQS_H
-#define __ASM_MACH_IRQS_H
-
-/* Stuck here until drivers/pinctl/sh-pfc gets rid of legacy code */
-
-/* External IRQ pins */
-#define IRQPIN_BASE		2000
-#define irq_pin(nr)		((nr) + IRQPIN_BASE)
-
-#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-shmobile/irqs.h b/arch/arm/mach-shmobile/irqs.h
deleted file mode 100644
index 3070f6d887eb..000000000000
--- a/arch/arm/mach-shmobile/irqs.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __SHMOBILE_IRQS_H
-#define __SHMOBILE_IRQS_H
-
-#include "include/mach/irqs.h"
-
-/* GIC */
-#define gic_spi(nr)		((nr) + 32)
-#define gic_iid(nr)		(nr) /* ICCIAR / interrupt ID */
-
-/* GPIO IRQ */
-#define _GPIO_IRQ_BASE		2500
-#define GPIO_IRQ_BASE(x)	(_GPIO_IRQ_BASE + (32 * x))
-#define GPIO_IRQ(x, y)		(_GPIO_IRQ_BASE + (32 * x) + y)
-
-#endif /* __SHMOBILE_IRQS_H */
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 0ab9d3272875..fab95d1271bc 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -22,7 +22,6 @@
 #include <asm/mach/arch.h>
 
 #include "common.h"
-#include "irqs.h"
 
 #define MODEMR 0xffcc0020
 
-- 
2.1.4

Re: [GIT PULL] Renesas ARM Based SoC Cleanup for v4.5

[Arnd Bergmann]

On Friday 27 November 2015 10:55:47 Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these Renesas ARM based SoC cleanup for v4.5.
> 
> This pull request includes some minor cleanups and
> introduces ARCH_RENESAS as a firs step to migrating away
> from ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI.
> 
> 
> The following changes since commit 8005c49d9aea74d382f474ce11afbbc7d7130bec:
> 
>   Linux 4.4-rc1 (2015-11-15 17:00:27 -0800)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v4.5
> 
> for you to fetch changes up to c8cd74a1468ffe20db3ddc6e6f408d5377f9be43:
> 
>   ARM: shmobile: Remove legacy mach/irqs.h (2015-11-19 16:28:01 -0800)
> 
> ----------------------------------------------------------------
> Renesas ARM Based SoC Cleanup for v4.5
> 
> * Remove now unnecessary header
> * Introduce ARCH_RENESAS
> * Remove unmaintened URL from MAINTAINERS
> 

Pulled into next/cleanup, one conflict gone from linux-next.

Thanks,

	Arnd

[GIT PULL] Renesas ARM Based SoC Cleanup for v4.5

[Arnd Bergmann]

On Friday 27 November 2015 10:55:47 Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these Renesas ARM based SoC cleanup for v4.5.
> 
> This pull request includes some minor cleanups and
> introduces ARCH_RENESAS as a firs step to migrating away
> from ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI.
> 
> 
> The following changes since commit 8005c49d9aea74d382f474ce11afbbc7d7130bec:
> 
>   Linux 4.4-rc1 (2015-11-15 17:00:27 -0800)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v4.5
> 
> for you to fetch changes up to c8cd74a1468ffe20db3ddc6e6f408d5377f9be43:
> 
>   ARM: shmobile: Remove legacy mach/irqs.h (2015-11-19 16:28:01 -0800)
> 
> ----------------------------------------------------------------
> Renesas ARM Based SoC Cleanup for v4.5
> 
> * Remove now unnecessary header
> * Introduce ARCH_RENESAS
> * Remove unmaintened URL from MAINTAINERS
> 

Pulled into next/cleanup, one conflict gone from linux-next.

Thanks,

	Arnd