Re: openbmc power-control can't work OK.

* Re: openbmc power-control can't work OK.
       [not found] <78e5fc47.6f45.16e0259a229.Coremail.guilin1985@126.com>
@ 2019-10-25 15:59 ` Bills, Jason M
  2019-10-28  7:12   ` 阿桂
  2019-11-15 10:53   ` s2600wf problems (was: openbmc power-control can't work OK) Alexander Amelkin
  0 siblings, 2 replies; 5+ messages in thread
From: Bills, Jason M @ 2019-10-25 15:59 UTC (permalink / raw)
  To: 阿桂, openbmc

I'm copying the mailing list in case there are others who have similar 
questions.

On 10/25/2019 2:57 AM, 阿桂 wrote:
>     Hi, jason
>           Could you help me, please ? My board is not a evb board, but 
> it is x86 platform. So i build openbmc *meta-s2600wf*(commit 
> ID c549f3a7f5496ec3b54ed65c8b4d8351db10995e) instead，which use 
> x86-power-control version f61ca6fdcc52beba485e014b5fad38a9e9a555ad 
> <https://github.com/openbmc/x86-power-control/commit/f61ca6fdcc52beba485e014b5fad38a9e9a555ad>. 
> But when i use "ipmitools chassis power status" commond to get host 
> status at my board, it point out "Get Chassis Power Status failed: 
> Unspecified error", journalctl -f command refer to "ipmid[279]: Failed 
> to fetch ACBoot property, ipmid[279]: Failed to fetch RestartCause 
> property". It seems there have no property in dbus.  Where is the dbus 
> property ACBoot and RestartCause defined?I'm puzzled about this 
> /situation. Could you///give me some suggestions?

This is because the IPMI chassis power status command gets the power 
status by calling the IPMI chassis status command which requires a lot 
of other information such as the restart cause and AC fail status to 
return successfully.

The ACBoot property is provided by a small script that we run to get the 
reset reason from uboot.  You can find it here: 
https://github.com/Intel-BMC/openbmc/tree/intel/meta-openbmc-mods/meta-common/recipes-core/ac-boot-check.

The RestartCause property recently moved to x86-power-control and is 
being synced up in this review: 
https://gerrit.openbmc-project.xyz/c/openbmc/x86-power-control/+/26491.

Thanks,
-Jason

> /         Thanks a lot./
> 
> 

^ permalink raw reply	[flat|nested] 5+ messages in thread