From: Baruch Siach <baruch@tkos.co.il> To: Kishon Vijay Abraham I <kishon@ti.com>, Vinod Koul <vkoul@kernel.org> Cc: Kathiravan T <kathirav@codeaurora.org>, Baruch Siach <baruch@tkos.co.il>, Andy Gross <agross@kernel.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/3] arm64: dts: ipq6018: enable USB2 support Date: Wed, 27 Jan 2021 16:20:29 +0200 [thread overview] Message-ID: <59a0d43f34b69406cd320f16edc4e7fabe022bfd.1611756920.git.baruch@tkos.co.il> (raw) In-Reply-To: <cover.1611756920.git.baruch@tkos.co.il> From: Kathiravan T <kathirav@codeaurora.org> Signed-off-by: Kathiravan T <kathirav@codeaurora.org> [baruch: adjust regs address/size; drop binding updates; drop unsupported quirk properties] Signed-off-by: Baruch Siach <baruch@tkos.co.il> --- arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 8 ++++ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 48 ++++++++++++++++++++ 2 files changed, 56 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts index 99cefe88f6f2..5aec18308712 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts +++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts @@ -78,3 +78,11 @@ nand@0 { nand-bus-width = <8>; }; }; + +&qusb_phy_1 { + status = "ok"; +}; + +&usb2 { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 9fa5b028e4f3..d4a3d4e4a7e9 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -524,6 +524,54 @@ qrtr_requests { }; }; + qusb_phy_1: qusb@59000 { + compatible = "qcom,ipq6018-qusb2-phy"; + reg = <0x0 0x059000 0x0 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2_1_PHY_BCR>; + status = "disabled"; + }; + + usb2: usb2@7000000 { + compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; + reg = <0x0 0x070F8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_SLEEP_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; + clock-names = "master", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; + assigned-clock-rates = <133330000>, + <24000000>; + resets = <&gcc GCC_USB1_BCR>; + status = "disabled"; + + dwc_1: dwc3@7000000 { + compatible = "snps,dwc3"; + reg = <0x0 0x7000000 0x0 0xcd00>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + phys = <&qusb_phy_1>; + phy-names = "usb2-phy"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + dr_mode = "host"; + }; + }; + }; wcss: wcss-smp2p { -- 2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Baruch Siach <baruch@tkos.co.il> To: Kishon Vijay Abraham I <kishon@ti.com>, Vinod Koul <vkoul@kernel.org> Cc: Baruch Siach <baruch@tkos.co.il>, linux-arm-msm@vger.kernel.org, Bjorn Andersson <bjorn.andersson@linaro.org>, Kathiravan T <kathirav@codeaurora.org>, Andy Gross <agross@kernel.org>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/3] arm64: dts: ipq6018: enable USB2 support Date: Wed, 27 Jan 2021 16:20:29 +0200 [thread overview] Message-ID: <59a0d43f34b69406cd320f16edc4e7fabe022bfd.1611756920.git.baruch@tkos.co.il> (raw) In-Reply-To: <cover.1611756920.git.baruch@tkos.co.il> From: Kathiravan T <kathirav@codeaurora.org> Signed-off-by: Kathiravan T <kathirav@codeaurora.org> [baruch: adjust regs address/size; drop binding updates; drop unsupported quirk properties] Signed-off-by: Baruch Siach <baruch@tkos.co.il> --- arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 8 ++++ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 48 ++++++++++++++++++++ 2 files changed, 56 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts index 99cefe88f6f2..5aec18308712 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts +++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts @@ -78,3 +78,11 @@ nand@0 { nand-bus-width = <8>; }; }; + +&qusb_phy_1 { + status = "ok"; +}; + +&usb2 { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 9fa5b028e4f3..d4a3d4e4a7e9 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -524,6 +524,54 @@ qrtr_requests { }; }; + qusb_phy_1: qusb@59000 { + compatible = "qcom,ipq6018-qusb2-phy"; + reg = <0x0 0x059000 0x0 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2_1_PHY_BCR>; + status = "disabled"; + }; + + usb2: usb2@7000000 { + compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; + reg = <0x0 0x070F8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_SLEEP_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; + clock-names = "master", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; + assigned-clock-rates = <133330000>, + <24000000>; + resets = <&gcc GCC_USB1_BCR>; + status = "disabled"; + + dwc_1: dwc3@7000000 { + compatible = "snps,dwc3"; + reg = <0x0 0x7000000 0x0 0xcd00>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + phys = <&qusb_phy_1>; + phy-names = "usb2-phy"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + dr_mode = "host"; + }; + }; + }; wcss: wcss-smp2p { -- 2.29.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-01-27 14:26 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-01-27 14:20 [PATCH 0/3] phy: qualcomm: support IPQ60xx USB PHY Baruch Siach 2021-01-27 14:20 ` Baruch Siach 2021-01-27 14:20 ` [PATCH 1/3] phy: qcom-qusb2: add QUSB2 support for IPQ6018 Baruch Siach 2021-01-27 14:20 ` Baruch Siach 2021-01-27 14:20 ` [PATCH 2/3] dt-bindings: phy: qcom,qusb2: document ipq6018 compatible Baruch Siach 2021-01-27 14:20 ` [PATCH 2/3] dt-bindings: phy: qcom, qusb2: " Baruch Siach 2021-01-27 14:20 ` Baruch Siach [this message] 2021-01-27 14:20 ` [PATCH 3/3] arm64: dts: ipq6018: enable USB2 support Baruch Siach 2021-02-05 6:09 ` Kathiravan T 2021-02-07 9:08 ` Baruch Siach 2021-02-07 9:08 ` Baruch Siach 2021-02-08 5:44 ` Kathiravan T 2021-02-04 7:50 ` [PATCH 0/3] phy: qualcomm: support IPQ60xx USB PHY Vinod Koul 2021-02-04 7:50 ` Vinod Koul
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=59a0d43f34b69406cd320f16edc4e7fabe022bfd.1611756920.git.baruch@tkos.co.il \ --to=baruch@tkos.co.il \ --cc=agross@kernel.org \ --cc=bjorn.andersson@linaro.org \ --cc=kathirav@codeaurora.org \ --cc=kishon@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.