* [PATCH] extcon: int3496: process id-pin first so that we start with the right status @ 2018-01-25 19:39 ` Hans de Goede 2018-02-01 21:46 ` Chanwoo Choi 2018-02-02 0:32 ` Chanwoo Choi 0 siblings, 2 replies; 6+ messages in thread From: Hans de Goede @ 2018-01-25 19:39 UTC (permalink / raw) To: MyungJoo Ham, Chanwoo Choi; +Cc: Hans de Goede, linux-kernel Some other drivers may be waiting for our extcon to show-up (exiting their probe methods with -EPROBE_DEFER until we show up). These drivers will typically get the cable state directly after getting the extcon, this commit changes the int3496 code to process the id-pin before registering the extcon, so that other drivers see the correct state right away. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- drivers/extcon/extcon-intel-int3496.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c index c8691b5a9cb0..b23ee9d993a3 100644 --- a/drivers/extcon/extcon-intel-int3496.c +++ b/drivers/extcon/extcon-intel-int3496.c @@ -131,6 +131,10 @@ static int int3496_probe(struct platform_device *pdev) if (IS_ERR(data->gpio_usb_mux)) dev_info(dev, "can't request USB MUX GPIO\n"); + /* process id-pin first so that we start with the right status */ + queue_delayed_work(system_wq, &data->work, 0); + flush_delayed_work(&data->work); + /* register extcon device */ data->edev = devm_extcon_dev_allocate(dev, int3496_cable); if (IS_ERR(data->edev)) @@ -153,9 +157,6 @@ static int int3496_probe(struct platform_device *pdev) return ret; } - /* queue initial processing of id-pin */ - queue_delayed_work(system_wq, &data->work, 0); - platform_set_drvdata(pdev, data); return 0; -- 2.14.3 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] extcon: int3496: process id-pin first so that we start with the right status 2018-01-25 19:39 ` [PATCH] extcon: int3496: process id-pin first so that we start with the right status Hans de Goede @ 2018-02-01 21:46 ` Chanwoo Choi 2018-02-02 0:32 ` Chanwoo Choi 1 sibling, 0 replies; 6+ messages in thread From: Chanwoo Choi @ 2018-02-01 21:46 UTC (permalink / raw) To: Hans de Goede, MyungJoo Ham; +Cc: linux-kernel On 2018년 01월 26일 04:39, Hans de Goede wrote: > Some other drivers may be waiting for our extcon to show-up (exiting their > probe methods with -EPROBE_DEFER until we show up). > > These drivers will typically get the cable state directly after getting > the extcon, this commit changes the int3496 code to process the id-pin > before registering the extcon, so that other drivers see the correct state > right away. > > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > --- > drivers/extcon/extcon-intel-int3496.c | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c > index c8691b5a9cb0..b23ee9d993a3 100644 > --- a/drivers/extcon/extcon-intel-int3496.c > +++ b/drivers/extcon/extcon-intel-int3496.c > @@ -131,6 +131,10 @@ static int int3496_probe(struct platform_device *pdev) > if (IS_ERR(data->gpio_usb_mux)) > dev_info(dev, "can't request USB MUX GPIO\n"); > > + /* process id-pin first so that we start with the right status */ > + queue_delayed_work(system_wq, &data->work, 0); > + flush_delayed_work(&data->work); > + > /* register extcon device */ > data->edev = devm_extcon_dev_allocate(dev, int3496_cable); > if (IS_ERR(data->edev)) > @@ -153,9 +157,6 @@ static int int3496_probe(struct platform_device *pdev) > return ret; > } > > - /* queue initial processing of id-pin */ > - queue_delayed_work(system_wq, &data->work, 0); > - > platform_set_drvdata(pdev, data); > > return 0; > Applied it. Thanks. -- Best Regards, Chanwoo Choi Samsung Electronics ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] extcon: int3496: process id-pin first so that we start with the right status 2018-01-25 19:39 ` [PATCH] extcon: int3496: process id-pin first so that we start with the right status Hans de Goede 2018-02-01 21:46 ` Chanwoo Choi @ 2018-02-02 0:32 ` Chanwoo Choi 2018-02-02 8:10 ` Hans de Goede 1 sibling, 1 reply; 6+ messages in thread From: Chanwoo Choi @ 2018-02-02 0:32 UTC (permalink / raw) To: Hans de Goede, MyungJoo Ham; +Cc: linux-kernel On 2018년 01월 26일 04:39, Hans de Goede wrote: > Some other drivers may be waiting for our extcon to show-up (exiting their > probe methods with -EPROBE_DEFER until we show up). > > These drivers will typically get the cable state directly after getting > the extcon, this commit changes the int3496 code to process the id-pin > before registering the extcon, so that other drivers see the correct state > right away. > > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > --- > drivers/extcon/extcon-intel-int3496.c | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c > index c8691b5a9cb0..b23ee9d993a3 100644 > --- a/drivers/extcon/extcon-intel-int3496.c > +++ b/drivers/extcon/extcon-intel-int3496.c > @@ -131,6 +131,10 @@ static int int3496_probe(struct platform_device *pdev) > if (IS_ERR(data->gpio_usb_mux)) > dev_info(dev, "can't request USB MUX GPIO\n"); > > + /* process id-pin first so that we start with the right status */ > + queue_delayed_work(system_wq, &data->work, 0); > + flush_delayed_work(&data->work); > + > /* register extcon device */ > data->edev = devm_extcon_dev_allocate(dev, int3496_cable); > if (IS_ERR(data->edev)) > @@ -153,9 +157,6 @@ static int int3496_probe(struct platform_device *pdev) > return ret; > } > > - /* queue initial processing of id-pin */ > - queue_delayed_work(system_wq, &data->work, 0); > - > platform_set_drvdata(pdev, data); > > return 0; > Looks good to me. How about adding the 'Fixes' commit id on patch description? I think that your revert patch of axp288 and this patch should be included in extcon-fixes branch. -- Best Regards, Chanwoo Choi Samsung Electronics ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] extcon: int3496: process id-pin first so that we start with the right status 2018-02-02 0:32 ` Chanwoo Choi @ 2018-02-02 8:10 ` Hans de Goede 2018-02-04 23:28 ` Chanwoo Choi 0 siblings, 1 reply; 6+ messages in thread From: Hans de Goede @ 2018-02-02 8:10 UTC (permalink / raw) To: Chanwoo Choi, MyungJoo Ham; +Cc: linux-kernel Hi, On 02-02-18 01:32, Chanwoo Choi wrote: > On 2018년 01월 26일 04:39, Hans de Goede wrote: >> Some other drivers may be waiting for our extcon to show-up (exiting their >> probe methods with -EPROBE_DEFER until we show up). >> >> These drivers will typically get the cable state directly after getting >> the extcon, this commit changes the int3496 code to process the id-pin >> before registering the extcon, so that other drivers see the correct state >> right away. >> >> Signed-off-by: Hans de Goede <hdegoede@redhat.com> >> --- >> drivers/extcon/extcon-intel-int3496.c | 7 ++++--- >> 1 file changed, 4 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c >> index c8691b5a9cb0..b23ee9d993a3 100644 >> --- a/drivers/extcon/extcon-intel-int3496.c >> +++ b/drivers/extcon/extcon-intel-int3496.c >> @@ -131,6 +131,10 @@ static int int3496_probe(struct platform_device *pdev) >> if (IS_ERR(data->gpio_usb_mux)) >> dev_info(dev, "can't request USB MUX GPIO\n"); >> >> + /* process id-pin first so that we start with the right status */ >> + queue_delayed_work(system_wq, &data->work, 0); >> + flush_delayed_work(&data->work); >> + >> /* register extcon device */ >> data->edev = devm_extcon_dev_allocate(dev, int3496_cable); >> if (IS_ERR(data->edev)) >> @@ -153,9 +157,6 @@ static int int3496_probe(struct platform_device *pdev) >> return ret; >> } >> >> - /* queue initial processing of id-pin */ >> - queue_delayed_work(system_wq, &data->work, 0); >> - >> platform_set_drvdata(pdev, data); >> >> return 0; >> > > Looks good to me. > How about adding the 'Fixes' commit id on patch description? Right, this could use a: Fixes: 2f556bdb9f2e ("extcon: int3496: Add Intel INT3496 ACPI device extcon driver") tag. > I think that your revert patch of axp288 and this patch > should be included in extcon-fixes branch. Ack. Regards, Hans ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] extcon: int3496: process id-pin first so that we start with the right status 2018-02-02 8:10 ` Hans de Goede @ 2018-02-04 23:28 ` Chanwoo Choi 2018-02-06 8:11 ` Hans de Goede 0 siblings, 1 reply; 6+ messages in thread From: Chanwoo Choi @ 2018-02-04 23:28 UTC (permalink / raw) To: Hans de Goede, MyungJoo Ham; +Cc: linux-kernel On 2018년 02월 02일 17:10, Hans de Goede wrote: > Hi, > > On 02-02-18 01:32, Chanwoo Choi wrote: >> On 2018년 01월 26일 04:39, Hans de Goede wrote: >>> Some other drivers may be waiting for our extcon to show-up (exiting their >>> probe methods with -EPROBE_DEFER until we show up). >>> >>> These drivers will typically get the cable state directly after getting >>> the extcon, this commit changes the int3496 code to process the id-pin >>> before registering the extcon, so that other drivers see the correct state >>> right away. >>> >>> Signed-off-by: Hans de Goede <hdegoede@redhat.com> >>> --- >>> drivers/extcon/extcon-intel-int3496.c | 7 ++++--- >>> 1 file changed, 4 insertions(+), 3 deletions(-) >>> >>> diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c >>> index c8691b5a9cb0..b23ee9d993a3 100644 >>> --- a/drivers/extcon/extcon-intel-int3496.c >>> +++ b/drivers/extcon/extcon-intel-int3496.c >>> @@ -131,6 +131,10 @@ static int int3496_probe(struct platform_device *pdev) >>> if (IS_ERR(data->gpio_usb_mux)) >>> dev_info(dev, "can't request USB MUX GPIO\n"); >>> + /* process id-pin first so that we start with the right status */ >>> + queue_delayed_work(system_wq, &data->work, 0); >>> + flush_delayed_work(&data->work); >>> + >>> /* register extcon device */ >>> data->edev = devm_extcon_dev_allocate(dev, int3496_cable); >>> if (IS_ERR(data->edev)) >>> @@ -153,9 +157,6 @@ static int int3496_probe(struct platform_device *pdev) >>> return ret; >>> } >>> - /* queue initial processing of id-pin */ >>> - queue_delayed_work(system_wq, &data->work, 0); >>> - >>> platform_set_drvdata(pdev, data); >>> return 0; >>> >> >> Looks good to me. >> How about adding the 'Fixes' commit id on patch description? > > Right, this could use a: > > Fixes: 2f556bdb9f2e ("extcon: int3496: Add Intel INT3496 ACPI device extcon driver") > Please resend this patch Because you need to send the Linux stable mailing list. -- Best Regards, Chanwoo Choi Samsung Electronics ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] extcon: int3496: process id-pin first so that we start with the right status 2018-02-04 23:28 ` Chanwoo Choi @ 2018-02-06 8:11 ` Hans de Goede 0 siblings, 0 replies; 6+ messages in thread From: Hans de Goede @ 2018-02-06 8:11 UTC (permalink / raw) To: Chanwoo Choi, MyungJoo Ham; +Cc: linux-kernel HI, On 05-02-18 00:28, Chanwoo Choi wrote: > On 2018년 02월 02일 17:10, Hans de Goede wrote: >> Hi, >> >> On 02-02-18 01:32, Chanwoo Choi wrote: >>> On 2018년 01월 26일 04:39, Hans de Goede wrote: >>>> Some other drivers may be waiting for our extcon to show-up (exiting their >>>> probe methods with -EPROBE_DEFER until we show up). >>>> >>>> These drivers will typically get the cable state directly after getting >>>> the extcon, this commit changes the int3496 code to process the id-pin >>>> before registering the extcon, so that other drivers see the correct state >>>> right away. >>>> >>>> Signed-off-by: Hans de Goede <hdegoede@redhat.com> >>>> --- >>>> drivers/extcon/extcon-intel-int3496.c | 7 ++++--- >>>> 1 file changed, 4 insertions(+), 3 deletions(-) >>>> >>>> diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c >>>> index c8691b5a9cb0..b23ee9d993a3 100644 >>>> --- a/drivers/extcon/extcon-intel-int3496.c >>>> +++ b/drivers/extcon/extcon-intel-int3496.c >>>> @@ -131,6 +131,10 @@ static int int3496_probe(struct platform_device *pdev) >>>> if (IS_ERR(data->gpio_usb_mux)) >>>> dev_info(dev, "can't request USB MUX GPIO\n"); >>>> + /* process id-pin first so that we start with the right status */ >>>> + queue_delayed_work(system_wq, &data->work, 0); >>>> + flush_delayed_work(&data->work); >>>> + >>>> /* register extcon device */ >>>> data->edev = devm_extcon_dev_allocate(dev, int3496_cable); >>>> if (IS_ERR(data->edev)) >>>> @@ -153,9 +157,6 @@ static int int3496_probe(struct platform_device *pdev) >>>> return ret; >>>> } >>>> - /* queue initial processing of id-pin */ >>>> - queue_delayed_work(system_wq, &data->work, 0); >>>> - >>>> platform_set_drvdata(pdev, data); >>>> return 0; >>>> >>> >>> Looks good to me. >>> How about adding the 'Fixes' commit id on patch description? >> >> Right, this could use a: >> >> Fixes: 2f556bdb9f2e ("extcon: int3496: Add Intel INT3496 ACPI device extcon driver") >> > > Please resend this patch Because you need to send the Linux stable mailing list. Ok, I've just send a v2 with the Fixes and Cc: stable tags added. Regards, Hans ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-02-06 8:11 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <CGME20180125193930epcas1p15288db5193038561d6061fcaa2a802bb@epcas1p1.samsung.com> 2018-01-25 19:39 ` [PATCH] extcon: int3496: process id-pin first so that we start with the right status Hans de Goede 2018-02-01 21:46 ` Chanwoo Choi 2018-02-02 0:32 ` Chanwoo Choi 2018-02-02 8:10 ` Hans de Goede 2018-02-04 23:28 ` Chanwoo Choi 2018-02-06 8:11 ` Hans de Goede
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.