* ath10k-firmware: QCA4019 hw1.0: Add EnGenius EMR5000 specific BDFs
@ 2019-09-24 6:48 frank.shen
2022-01-21 13:26 ` Kalle Valo
0 siblings, 1 reply; 2+ messages in thread
From: frank.shen @ 2019-09-24 6:48 UTC (permalink / raw)
To: ath10k; +Cc: frank.shen
[-- Attachment #1: Type: text/plain, Size: 1390 bytes --]
Hi,
The support for this device was added a while ago to OpenWrt. This AP requires two special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board-id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't provide special IDs for customers and seems to use the AP-DK board-ids in the wifi firmware to change its behavior. This request contains the two files for QCA4019. The QCA9888 one will be submitted in a different request.
Now to the questions from the wiki page [1]:
l description for what hardware this is:
- it is a IPQ4019 based board
- one QCA4019 radio is used as 2.4GHz radio
- one QCA4019 radio is used as 5GHz radio
- an additional QCA9888 5GHz radio is attached via PCI
l origin of the board file (did you create it yourself or where you downloaded)
- taken from stock firmware image
l ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- QCA4019 hw1.0
md5sum of each new board file to add
+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=EnGenius-EMR5000
md5sum: e4e0c9bc1482b03b8240817b5918666c
+ bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=EnGenius-EMR5000
md5sum: a4e9856757014f4591d40ce93bab3e4f
Sincerely,
Frank Shen
Engineer
Research and Development
Senao Networks, Inc.
Tel: +886-3-3289289 ext. 2697
Fax: +886-3-3961112
[-- Attachment #2: bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=EnGenius-EMR5000.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #3: bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=EnGenius-EMR5000.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #4: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: ath10k-firmware: QCA4019 hw1.0: Add EnGenius EMR5000 specific BDFs
2019-09-24 6:48 ath10k-firmware: QCA4019 hw1.0: Add EnGenius EMR5000 specific BDFs frank.shen
@ 2022-01-21 13:26 ` Kalle Valo
0 siblings, 0 replies; 2+ messages in thread
From: Kalle Valo @ 2022-01-21 13:26 UTC (permalink / raw)
To: frank.shen; +Cc: ath10k
<frank.shen@senao.com> writes:
> Hi,
>
> The support for this device was added a while ago to OpenWrt. This AP
> requires two special BDFs to get the Wi-Fi PHYs working (correctly).
> The bmi-board-id='s would clash with one of the the IPQ401X AP-DK
> boards because QCA doesn't provide special IDs for customers and seems
> to use the AP-DK board-ids in the wifi firmware to change its
> behavior. This request contains the two files for QCA4019. The QCA9888
> one will be submitted in a different request.
>
> Now to the questions from the wiki page [1]:
>
> l description for what hardware this is:
> - it is a IPQ4019 based board
> - one QCA4019 radio is used as 2.4GHz radio
> - one QCA4019 radio is used as 5GHz radio
> - an additional QCA9888 5GHz radio is attached via PCI
>
> l origin of the board file (did you create it yourself or where you downloaded)
> - taken from stock firmware image
>
> l ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
> - QCA4019 hw1.0
>
> md5sum of each new board file to add
> + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=EnGenius-EMR5000
> md5sum: e4e0c9bc1482b03b8240817b5918666c
> + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=EnGenius-EMR5000
> md5sum: a4e9856757014f4591d40ce93bab3e4f
Thanks, added to QCA4019/hw1.0/board-2.bin:
New:
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=EnGenius-EMR5000
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=EnGenius-EMR5000
Changed:
Deleted:
2 board image(s) added, 0 changed, 0 deleted, 62 in total
https://github.com/kvalo/ath10k-firmware/commit/8f150f4a3d52415b95fbbfead8dcaff458b80332
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-01-21 13:27 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-24 6:48 ath10k-firmware: QCA4019 hw1.0: Add EnGenius EMR5000 specific BDFs frank.shen
2022-01-21 13:26 ` Kalle Valo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.