Re: [PATCH 3/3] ARM: dts: add SD5203 dts

[Wei Xu <xuwei5@hisilicon.com>]

Hi Zhen,

On 2020/9/3 20:27, Zhen Lei wrote:
> From: Kefeng Wang <wangkefeng.wang@huawei.com>
> 
> Add sd5203.dts for Hisilicon SD5203 SoC platform.
> 
> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> ---
>  arch/arm/boot/dts/Makefile   |  2 +
>  arch/arm/boot/dts/sd5203.dts | 90 ++++++++++++++++++++++++++++++++++++
>  2 files changed, 92 insertions(+)
>  create mode 100644 arch/arm/boot/dts/sd5203.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 4572db3fa5ae..1d1262df5c55 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -357,6 +357,8 @@ dtb-$(CONFIG_ARCH_MPS2) += \
>  	mps2-an399.dtb
>  dtb-$(CONFIG_ARCH_MOXART) += \
>  	moxart-uc7112lx.dtb
> +dtb-$(CONFIG_ARCH_SD5203) += \
> +	sd5203.dtb
>  dtb-$(CONFIG_SOC_IMX1) += \
>  	imx1-ads.dtb \
>  	imx1-apf9328.dtb
> diff --git a/arch/arm/boot/dts/sd5203.dts b/arch/arm/boot/dts/sd5203.dts
> new file mode 100644
> index 000000000000..99da46072f72
> --- /dev/null
> +++ b/arch/arm/boot/dts/sd5203.dts
> @@ -0,0 +1,90 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2020 Hisilicon Limited.
> + *
> + * DTS file for Hisilicon SD5203 Board
> + */
> +
> +/dts-v1/;
> +
> +/ {
> +	model = "Hisilicon SD5203";
> +	compatible = "hisilicon,sd5203";

Can you please add the binding document as well?

> +	interrupt-parent = <&vic>;
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	chosen {
> +		bootargs="console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000";
> +	};
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	cpu {
> +		compatible = "arm,arm926ej-s";
> +		device_type = "cpu";
> +	};
> +
> +	memory@30000000 {
> +		device_type = "memory";
> +		reg = <0x30000000 0x8000000>;
> +	};
> +
> +	soc {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "simple-bus";
> +		ranges;
> +
> +		vic: interrupt-controller@10130000 {
> +			compatible = "hisilicon,sd5203-vic";

Ditto.
Thanks!

Best Regards,
Wei

> +			reg = <0x10130000 0x1000>;
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +		};
> +
> +		refclk125mhz: refclk125mhz {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <125000000>;
> +		};
> +
> +		timer0: timer@16002000 {
> +			compatible = "arm,sp804", "arm,primecell";
> +			reg = <0x16002000 0x1000>;
> +			interrupts = <4>;
> +			clocks = <&refclk125mhz>;
> +			clock-names = "apb_pclk";
> +		};
> +
> +		timer1: timer@16003000 {
> +			compatible = "arm,sp804", "arm,primecell";
> +			reg = <0x16003000 0x1000>;
> +			interrupts = <5>;
> +			clocks = <&refclk125mhz>;
> +			clock-names = "apb_pclk";
> +		};
> +
> +		uart0: serial@1600D000 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x1600D000 0x1000>;
> +			bus_id = "uart0";
> +			clocks = <&refclk125mhz>;
> +			clock-names = "apb_pclk";
> +			reg-shift = <2>;
> +			interrupts = <17>;
> +		};
> +
> +		uart1: serial@1600C000 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x1600C000 0x1000>;
> +			clocks = <&refclk125mhz>;
> +			clock-names = "apb_pclk";
> +			reg-shift = <2>;
> +			interrupts = <16>;
> +			status = "disabled";
> +		};
> +	};
> +};
>