From: Stefan Agner <stefan@agner.ch> To: linux@armlinux.org.uk Cc: arnd@arndb.de, ard.biesheuvel@linaro.org, robin.murphy@arm.com, yamada.masahiro@socionext.com, ndesaulniers@google.com, manojgupta@google.com, jiancai@google.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, clang-built-linux@googlegroups.com, Stefan Agner <stefan@agner.ch> Subject: [PATCH 2/3] ARM: use VFP assembler mnemonics in register load/store macros Date: Tue, 10 Mar 2020 23:01:20 +0100 [thread overview] Message-ID: <5a0ae07ce1eae117dcda1f7b2f0b4d13eb90f1d6.1583360296.git.stefan@agner.ch> (raw) In-Reply-To: <cover.1583360296.git.stefan@agner.ch> Clang's integrated assembler does not allow to access the VFP registers through the coprocessor load/store instructions: <instantiation>:4:6: error: invalid operand for instruction LDC p11, cr0, [r10],#32*4 @ FLDMIAD r10!, {d0-d15} ^ Replace the coprocessor load/store instructions with explicit assembler mnemonics to accessing the floating point coprocessor registers. Use assembler directives to select the appropriate FPU version. This allows to build these macros with GNU assembler as well as with Clang's built-in assembler. Signed-off-by: Stefan Agner <stefan@agner.ch> --- arch/arm/include/asm/vfpmacros.h | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h index 628c336e8e3b..947ee5395e1f 100644 --- a/arch/arm/include/asm/vfpmacros.h +++ b/arch/arm/include/asm/vfpmacros.h @@ -19,23 +19,25 @@ @ read all the working registers back into the VFP .macro VFPFLDMIA, base, tmp + .fpu vfpv2 #if __LINUX_ARM_ARCH__ < 6 - LDC p11, cr0, [\base],#33*4 @ FLDMIAX \base!, {d0-d15} + fldmiax \base!, {d0-d15} #else - LDC p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d0-d15} + vldmia \base!, {d0-d15} #endif #ifdef CONFIG_VFPv3 + .fpu vfpv3 #if __LINUX_ARM_ARCH__ <= 6 ldr \tmp, =elf_hwcap @ may not have MVFR regs ldr \tmp, [\tmp, #0] tst \tmp, #HWCAP_VFPD32 - ldclne p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} + vldmiane \base!, {d16-d31} addeq \base, \base, #32*4 @ step over unused register space #else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field cmp \tmp, #2 @ 32 x 64bit registers? - ldcleq p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} + vldmiaeq \base!, {d16-d31} addne \base, \base, #32*4 @ step over unused register space #endif #endif @@ -44,22 +46,23 @@ @ write all the working registers out of the VFP .macro VFPFSTMIA, base, tmp #if __LINUX_ARM_ARCH__ < 6 - STC p11, cr0, [\base],#33*4 @ FSTMIAX \base!, {d0-d15} + fstmiax \base!, {d0-d15} #else - STC p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d0-d15} + vstmia \base!, {d0-d15} #endif #ifdef CONFIG_VFPv3 + .fpu vfpv3 #if __LINUX_ARM_ARCH__ <= 6 ldr \tmp, =elf_hwcap @ may not have MVFR regs ldr \tmp, [\tmp, #0] tst \tmp, #HWCAP_VFPD32 - stclne p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} + vstmiane \base!, {d16-d31} addeq \base, \base, #32*4 @ step over unused register space #else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field cmp \tmp, #2 @ 32 x 64bit registers? - stcleq p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} + vstmiaeq \base!, {d16-d31} addne \base, \base, #32*4 @ step over unused register space #endif #endif -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Agner <stefan@agner.ch> To: linux@armlinux.org.uk Cc: clang-built-linux@googlegroups.com, arnd@arndb.de, ard.biesheuvel@linaro.org, ndesaulniers@google.com, linux-kernel@vger.kernel.org, Stefan Agner <stefan@agner.ch>, jiancai@google.com, yamada.masahiro@socionext.com, manojgupta@google.com, robin.murphy@arm.com, linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/3] ARM: use VFP assembler mnemonics in register load/store macros Date: Tue, 10 Mar 2020 23:01:20 +0100 [thread overview] Message-ID: <5a0ae07ce1eae117dcda1f7b2f0b4d13eb90f1d6.1583360296.git.stefan@agner.ch> (raw) In-Reply-To: <cover.1583360296.git.stefan@agner.ch> Clang's integrated assembler does not allow to access the VFP registers through the coprocessor load/store instructions: <instantiation>:4:6: error: invalid operand for instruction LDC p11, cr0, [r10],#32*4 @ FLDMIAD r10!, {d0-d15} ^ Replace the coprocessor load/store instructions with explicit assembler mnemonics to accessing the floating point coprocessor registers. Use assembler directives to select the appropriate FPU version. This allows to build these macros with GNU assembler as well as with Clang's built-in assembler. Signed-off-by: Stefan Agner <stefan@agner.ch> --- arch/arm/include/asm/vfpmacros.h | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h index 628c336e8e3b..947ee5395e1f 100644 --- a/arch/arm/include/asm/vfpmacros.h +++ b/arch/arm/include/asm/vfpmacros.h @@ -19,23 +19,25 @@ @ read all the working registers back into the VFP .macro VFPFLDMIA, base, tmp + .fpu vfpv2 #if __LINUX_ARM_ARCH__ < 6 - LDC p11, cr0, [\base],#33*4 @ FLDMIAX \base!, {d0-d15} + fldmiax \base!, {d0-d15} #else - LDC p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d0-d15} + vldmia \base!, {d0-d15} #endif #ifdef CONFIG_VFPv3 + .fpu vfpv3 #if __LINUX_ARM_ARCH__ <= 6 ldr \tmp, =elf_hwcap @ may not have MVFR regs ldr \tmp, [\tmp, #0] tst \tmp, #HWCAP_VFPD32 - ldclne p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} + vldmiane \base!, {d16-d31} addeq \base, \base, #32*4 @ step over unused register space #else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field cmp \tmp, #2 @ 32 x 64bit registers? - ldcleq p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} + vldmiaeq \base!, {d16-d31} addne \base, \base, #32*4 @ step over unused register space #endif #endif @@ -44,22 +46,23 @@ @ write all the working registers out of the VFP .macro VFPFSTMIA, base, tmp #if __LINUX_ARM_ARCH__ < 6 - STC p11, cr0, [\base],#33*4 @ FSTMIAX \base!, {d0-d15} + fstmiax \base!, {d0-d15} #else - STC p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d0-d15} + vstmia \base!, {d0-d15} #endif #ifdef CONFIG_VFPv3 + .fpu vfpv3 #if __LINUX_ARM_ARCH__ <= 6 ldr \tmp, =elf_hwcap @ may not have MVFR regs ldr \tmp, [\tmp, #0] tst \tmp, #HWCAP_VFPD32 - stclne p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} + vstmiane \base!, {d16-d31} addeq \base, \base, #32*4 @ step over unused register space #else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field cmp \tmp, #2 @ 32 x 64bit registers? - stcleq p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} + vstmiaeq \base!, {d16-d31} addne \base, \base, #32*4 @ step over unused register space #endif #endif -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-03-10 22:01 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-03-10 22:01 [PATCH 0/3] ARM: make use of UAL VFP mnemonics when possible Stefan Agner 2020-03-10 22:01 ` Stefan Agner 2020-03-10 22:01 ` [PATCH 1/3] ARM: use .fpu assembler directives instead of assembler arguments Stefan Agner 2020-03-10 22:01 ` Stefan Agner 2020-03-10 22:01 ` Stefan Agner [this message] 2020-03-10 22:01 ` [PATCH 2/3] ARM: use VFP assembler mnemonics in register load/store macros Stefan Agner 2020-03-10 22:01 ` [PATCH 3/3] ARM: use VFP assembler mnemonics if available Stefan Agner 2020-03-10 22:01 ` Stefan Agner
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=5a0ae07ce1eae117dcda1f7b2f0b4d13eb90f1d6.1583360296.git.stefan@agner.ch \ --to=stefan@agner.ch \ --cc=ard.biesheuvel@linaro.org \ --cc=arnd@arndb.de \ --cc=clang-built-linux@googlegroups.com \ --cc=jiancai@google.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=manojgupta@google.com \ --cc=ndesaulniers@google.com \ --cc=robin.murphy@arm.com \ --cc=yamada.masahiro@socionext.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.