* [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1
@ 2018-05-04 16:08 ` Dan Haab
0 siblings, 0 replies; 12+ messages in thread
From: Dan Haab @ 2018-05-04 16:08 UTC (permalink / raw)
To: Florian Fainelli
Cc: Mark Rutland, devicetree, Jon Mason, Hauke Mehrtens, Rob Herring,
bcm-kernel-feedback-list, Rafał Miłecki, Dan Haab,
linux-arm-kernel
Luxul XWR-3150 is a wireless router similar to the XWR-3100 except:
1) It has more RAM
2) Its NAND controller in running in BCH8 mode
3) LAN ports LEDs are hardware controlled
Signed-off-by: Dan Haab <dan.haab@luxul.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 77 ++++++++++++++++++++++++
2 files changed, 78 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7e24249..a00b279 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -104,6 +104,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47094-luxul-abr-4500.dtb \
bcm47094-luxul-xbr-4500.dtb \
bcm47094-luxul-xwr-3100.dtb \
+ bcm47094-luxul-xwr-3150-v1.dtb \
bcm47094-netgear-r8500.dtb \
bcm94708.dtb \
bcm94709.dtb \
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
new file mode 100644
index 0000000..bdad726
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul XWR-3150 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "bcm53xx:green:power";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ usb3 {
+ label = "bcm53xx:green:usb3";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ 2ghz {
+ label = "bcm53xx:green:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ };
+
+ 5ghz {
+ label = "bcm53xx:green:5ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1
@ 2018-05-04 16:08 ` Dan Haab
0 siblings, 0 replies; 12+ messages in thread
From: Dan Haab @ 2018-05-04 16:08 UTC (permalink / raw)
To: linux-arm-kernel
Luxul XWR-3150 is a wireless router similar to the XWR-3100 except:
1) It has more RAM
2) Its NAND controller in running in BCH8 mode
3) LAN ports LEDs are hardware controlled
Signed-off-by: Dan Haab <dan.haab@luxul.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 77 ++++++++++++++++++++++++
2 files changed, 78 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7e24249..a00b279 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -104,6 +104,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47094-luxul-abr-4500.dtb \
bcm47094-luxul-xbr-4500.dtb \
bcm47094-luxul-xwr-3100.dtb \
+ bcm47094-luxul-xwr-3150-v1.dtb \
bcm47094-netgear-r8500.dtb \
bcm94708.dtb \
bcm94709.dtb \
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
new file mode 100644
index 0000000..bdad726
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul XWR-3150 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "bcm53xx:green:power";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ usb3 {
+ label = "bcm53xx:green:usb3";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ 2ghz {
+ label = "bcm53xx:green:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ };
+
+ 5ghz {
+ label = "bcm53xx:green:5ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul XAP-1610
2018-05-04 16:08 ` Dan Haab
@ 2018-05-04 16:08 ` Dan Haab
-1 siblings, 0 replies; 12+ messages in thread
From: Dan Haab @ 2018-05-04 16:08 UTC (permalink / raw)
To: Florian Fainelli
Cc: Mark Rutland, devicetree, Jon Mason, Hauke Mehrtens, Rob Herring,
bcm-kernel-feedback-list, Rafał Miłecki, Dan Haab,
linux-arm-kernel
It's an access point based on BCM47094 SoC with two BCM4366E wireless
chipsets.
Signed-off-by: Dan Haab <dan.haab@luxul.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 57 +++++++++++++++++++++++++++
2 files changed, 58 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a00b279..d041508 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -102,6 +102,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47094-dlink-dir-885l.dtb \
bcm47094-linksys-panamera.dtb \
bcm47094-luxul-abr-4500.dtb \
+ bcm47094-luxul-xap-1610.dtb \
bcm47094-luxul-xbr-4500.dtb \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-luxul-xwr-3150-v1.dtb \
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
new file mode 100644
index 0000000..7fd8547
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+
+/ {
+ compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul XAP-1610 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ };
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi_nor {
+ status = "okay";
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul XAP-1610
@ 2018-05-04 16:08 ` Dan Haab
0 siblings, 0 replies; 12+ messages in thread
From: Dan Haab @ 2018-05-04 16:08 UTC (permalink / raw)
To: linux-arm-kernel
It's an access point based on BCM47094 SoC with two BCM4366E wireless
chipsets.
Signed-off-by: Dan Haab <dan.haab@luxul.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 57 +++++++++++++++++++++++++++
2 files changed, 58 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a00b279..d041508 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -102,6 +102,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47094-dlink-dir-885l.dtb \
bcm47094-linksys-panamera.dtb \
bcm47094-luxul-abr-4500.dtb \
+ bcm47094-luxul-xap-1610.dtb \
bcm47094-luxul-xbr-4500.dtb \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-luxul-xwr-3150-v1.dtb \
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
new file mode 100644
index 0000000..7fd8547
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+
+/ {
+ compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul XAP-1610 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ };
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi_nor {
+ status = "okay";
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1
2018-05-04 16:08 ` Dan Haab
@ 2018-05-09 5:06 ` Rafał Miłecki
-1 siblings, 0 replies; 12+ messages in thread
From: Rafał Miłecki @ 2018-05-09 5:06 UTC (permalink / raw)
To: Dan Haab, Florian Fainelli
Cc: Mark Rutland, devicetree, Jon Mason, Hauke Mehrtens, Rob Herring,
bcm-kernel-feedback-list, Dan Haab, linux-arm-kernel
On 04.05.2018 18:08, Dan Haab wrote:
> Luxul XWR-3150 is a wireless router similar to the XWR-3100 except:
> 1) It has more RAM
> 2) Its NAND controller in running in BCH8 mode
> 3) LAN ports LEDs are hardware controlled
>
> Signed-off-by: Dan Haab <dan.haab@luxul.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1
@ 2018-05-09 5:06 ` Rafał Miłecki
0 siblings, 0 replies; 12+ messages in thread
From: Rafał Miłecki @ 2018-05-09 5:06 UTC (permalink / raw)
To: linux-arm-kernel
On 04.05.2018 18:08, Dan Haab wrote:
> Luxul XWR-3150 is a wireless router similar to the XWR-3100 except:
> 1) It has more RAM
> 2) Its NAND controller in running in BCH8 mode
> 3) LAN ports LEDs are hardware controlled
>
> Signed-off-by: Dan Haab <dan.haab@luxul.com>
Acked-by: Rafa? Mi?ecki <rafal@milecki.pl>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul XAP-1610
2018-05-04 16:08 ` Dan Haab
@ 2018-05-09 5:07 ` Rafał Miłecki
-1 siblings, 0 replies; 12+ messages in thread
From: Rafał Miłecki @ 2018-05-09 5:07 UTC (permalink / raw)
To: Dan Haab, Florian Fainelli
Cc: Mark Rutland, devicetree, Jon Mason, Hauke Mehrtens, Rob Herring,
bcm-kernel-feedback-list, Dan Haab, linux-arm-kernel
On 04.05.2018 18:08, Dan Haab wrote:
> It's an access point based on BCM47094 SoC with two BCM4366E wireless
> chipsets.
>
> Signed-off-by: Dan Haab <dan.haab@luxul.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul XAP-1610
@ 2018-05-09 5:07 ` Rafał Miłecki
0 siblings, 0 replies; 12+ messages in thread
From: Rafał Miłecki @ 2018-05-09 5:07 UTC (permalink / raw)
To: linux-arm-kernel
On 04.05.2018 18:08, Dan Haab wrote:
> It's an access point based on BCM47094 SoC with two BCM4366E wireless
> chipsets.
>
> Signed-off-by: Dan Haab <dan.haab@luxul.com>
Acked-by: Rafa? Mi?ecki <rafal@milecki.pl>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1
2018-05-04 16:08 ` Dan Haab
@ 2018-05-09 19:17 ` Florian Fainelli
-1 siblings, 0 replies; 12+ messages in thread
From: Florian Fainelli @ 2018-05-09 19:17 UTC (permalink / raw)
To: bcm-kernel-feedback-list, Dan Haab
Cc: Mark Rutland, devicetree, Jon Mason, Hauke Mehrtens, Rob Herring,
Rafał Miłecki, Dan Haab, linux-arm-kernel
On Fri, 4 May 2018 10:08:43 -0600, Dan Haab <riproute@gmail.com> wrote:
> Luxul XWR-3150 is a wireless router similar to the XWR-3100 except:
> 1) It has more RAM
> 2) Its NAND controller in running in BCH8 mode
> 3) LAN ports LEDs are hardware controlled
>
> Signed-off-by: Dan Haab <dan.haab@luxul.com>
> ---
Applied to devicetree/next, thanks!
--
Florian
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1
@ 2018-05-09 19:17 ` Florian Fainelli
0 siblings, 0 replies; 12+ messages in thread
From: Florian Fainelli @ 2018-05-09 19:17 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, 4 May 2018 10:08:43 -0600, Dan Haab <riproute@gmail.com> wrote:
> Luxul XWR-3150 is a wireless router similar to the XWR-3100 except:
> 1) It has more RAM
> 2) Its NAND controller in running in BCH8 mode
> 3) LAN ports LEDs are hardware controlled
>
> Signed-off-by: Dan Haab <dan.haab@luxul.com>
> ---
Applied to devicetree/next, thanks!
--
Florian
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul XAP-1610
2018-05-04 16:08 ` Dan Haab
@ 2018-05-09 19:18 ` Florian Fainelli
-1 siblings, 0 replies; 12+ messages in thread
From: Florian Fainelli @ 2018-05-09 19:18 UTC (permalink / raw)
To: bcm-kernel-feedback-list, Dan Haab
Cc: Mark Rutland, devicetree, Jon Mason, Hauke Mehrtens, Rob Herring,
Rafał Miłecki, Dan Haab, linux-arm-kernel
On Fri, 4 May 2018 10:08:44 -0600, Dan Haab <riproute@gmail.com> wrote:
> It's an access point based on BCM47094 SoC with two BCM4366E wireless
> chipsets.
>
> Signed-off-by: Dan Haab <dan.haab@luxul.com>
> ---
Applied to devicetree/next, thanks!
--
Florian
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul XAP-1610
@ 2018-05-09 19:18 ` Florian Fainelli
0 siblings, 0 replies; 12+ messages in thread
From: Florian Fainelli @ 2018-05-09 19:18 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, 4 May 2018 10:08:44 -0600, Dan Haab <riproute@gmail.com> wrote:
> It's an access point based on BCM47094 SoC with two BCM4366E wireless
> chipsets.
>
> Signed-off-by: Dan Haab <dan.haab@luxul.com>
> ---
Applied to devicetree/next, thanks!
--
Florian
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2018-05-09 19:18 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-04 16:08 [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1 Dan Haab
2018-05-04 16:08 ` Dan Haab
2018-05-04 16:08 ` [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul XAP-1610 Dan Haab
2018-05-04 16:08 ` Dan Haab
2018-05-09 5:07 ` Rafał Miłecki
2018-05-09 5:07 ` Rafał Miłecki
2018-05-09 19:18 ` Florian Fainelli
2018-05-09 19:18 ` Florian Fainelli
2018-05-09 5:06 ` [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1 Rafał Miłecki
2018-05-09 5:06 ` Rafał Miłecki
2018-05-09 19:17 ` Florian Fainelli
2018-05-09 19:17 ` Florian Fainelli
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.