Re: [PATCH v2 1/1] virtio_net: notify MAC address change on device initialization

[Laurent Vivier <lvivier@redhat.com>]

On 1/27/23 12:08, Michael S. Tsirkin wrote:
> On Tue, Jan 24, 2023 at 12:04:24PM +0100, Laurent Vivier wrote:
>> On 1/24/23 11:15, Michael S. Tsirkin wrote:
>>> On Mon, Jan 23, 2023 at 01:00:22PM +0100, Laurent Vivier wrote:
>>>> In virtnet_probe(), if the device doesn't provide a MAC address the
>>>> driver assigns a random one.
>>>> As we modify the MAC address we need to notify the device to allow it
>>>> to update all the related information.
>>>>
>>>> The problem can be seen with vDPA and mlx5_vdpa driver as it doesn't
>>>> assign a MAC address by default. The virtio_net device uses a random
>>>> MAC address (we can see it with "ip link"), but we can't ping a net
>>>> namespace from another one using the virtio-vdpa device because the
>>>> new MAC address has not been provided to the hardware.
>>>
>>> And then what exactly happens? Does hardware drop the outgoing
>>> or the incoming packets? Pls include in the commit log.
>>
>> I don't know. There is nothing in the kernel logs.
>>
>> The ping error is: "Destination Host Unreachable"
>>
>> I found the problem with the mlx5 driver as in "it doesn't work when MAC
>> address is not set"...
>>
>> Perhaps Eli can explain what happens when the MAC address is not set?
>>
>>>
>>>> Signed-off-by: Laurent Vivier <lvivier@redhat.com>
>>>> ---
>>>>    drivers/net/virtio_net.c | 14 ++++++++++++++
>>>>    1 file changed, 14 insertions(+)
>>>>
>>>> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
>>>> index 7723b2a49d8e..4bdc8286678b 100644
>>>> --- a/drivers/net/virtio_net.c
>>>> +++ b/drivers/net/virtio_net.c
>>>> @@ -3800,6 +3800,8 @@ static int virtnet_probe(struct virtio_device *vdev)
>>>>    		eth_hw_addr_set(dev, addr);
>>>>    	} else {
>>>>    		eth_hw_addr_random(dev);
>>>> +		dev_info(&vdev->dev, "Assigned random MAC address %pM\n",
>>>> +			 dev->dev_addr);
>>>>    	}
>>>>    	/* Set up our device-specific information */
>>>> @@ -3956,6 +3958,18 @@ static int virtnet_probe(struct virtio_device *vdev)
>>>>    	pr_debug("virtnet: registered device %s with %d RX and TX vq's\n",
>>>>    		 dev->name, max_queue_pairs);
>>>> +	/* a random MAC address has been assigned, notify the device */
>>>> +	if (!virtio_has_feature(vdev, VIRTIO_NET_F_MAC) &&
>>>> +	    virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_MAC_ADDR)) {
>>>
>>> Maybe add a comment explaining that we don't fail probe if
>>> VIRTIO_NET_F_CTRL_MAC_ADDR is not there because
>>> many devices work fine without getting MAC explicitly.
>>
>> OK
>>
>>>
>>>> +		struct scatterlist sg;
>>>> +
>>>> +		sg_init_one(&sg, dev->dev_addr, dev->addr_len);
>>>> +		if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_MAC,
>>>> +					  VIRTIO_NET_CTRL_MAC_ADDR_SET, &sg)) {
>>>> +			dev_warn(&vdev->dev, "Failed to update MAC address.\n");
>>>
>>> Here, I'm not sure we want to proceed. Is it useful sometimes?
>>
>> I think reporting an error is always useful, but I can remove that if you prefer.
> 
> No the question was whether we should fail probe not
> whether we print the warning.

Good question.

After all, as VIRTIO_NET_F_CTRL_MAC_ADDR is set, if VIRTIO_NET_CTRL_MAC_ADDR_SET fails it 
means there is a real problem, so yes, we should fail.

> 
> 
>>> I note that we deny with virtnet_set_mac_address.
>>>
>>>> +		}
>>>> +	}
>>>> +
>>>>    	return 0;
>>>
>>>
>>>
>>> Also, some code duplication with virtnet_set_mac_address here.
>>>
>>> Also:
>>> 	When using the legacy interface, \field{mac} is driver-writable
>>> 	which provided a way for drivers to update the MAC without
>>> 	negotiating VIRTIO_NET_F_CTRL_MAC_ADDR.
>>>
>>> How about factoring out code in virtnet_set_mac_address
>>> and reusing that?
>>>
>>
>> In fact, we can write in the field only if we have VIRTIO_NET_F_MAC
>> (according to virtnet_set_mac_address(), and this code is executed only if
>> we do not have VIRTIO_NET_F_MAC. So I think it's better not factoring the
>> code as we have only the control queue case to manage.
>>
>>> This will also handle corner cases such as VIRTIO_NET_F_STANDBY
>>> which are not currently addressed.
>>
>> F_STANDBY is only enabled when virtio-net device MAC address is equal to the
>> VFIO device MAC address, I don't think it can be enabled when the MAC
>> address is randomly assigned (in this case it has already failed in
>> net_failover_create(), as it has been called using the random mac address),
>> it's why I didn't check for it.
> 
> But the spec did not say there's a dependency :(.
> My point is what should we do if there's F_STANDBY but no MAC?
> Maybe add a separate patch clearing F_STANDBY in this case?

The simplest would be to add at the beginning of the probe function:

if (!virtio_has_feature(vdev, VIRTIO_NET_F_MAC) &&
     virtio_has_feature(vdev, VIRTIO_NET_F_STANDBY)) {
	pr_err("virtio-net: a standby device cannot be used without a MAC address");
	return -EOPNOTSUPP;
}

And I think it would help a lot to debug misconfiguration of the interface.

Thanks,
Laurent

> 
>>>
>>>
>>>>    free_unregister_netdev:
>>>> -- 
>>>> 2.39.0
>>>
>>
>> Thanks,
>> Laurent
> 

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization