Re: AW: Regarding ofonod sending signal 11 after calling setup_sim7x00 for sim7600

[Pranoti Bobade <pranotib@renuelectronics.com>]

[-- Attachment #1: Type: text/plain, Size: 1693 bytes --]


Hi,

>Do you force ofono to detect a sim7600 at /dev/ttymxc1?
>> Can you how we can achieve this. We have recently started working with 
>> ofono.

Thanks.

Kind Regards,
Pranoti B.


-----Original Message----- 
From: Funktionspostfach Herbrechtsmeier OSS
Sent: Monday, May 27, 2019 2:26 PM
To: Pranoti Bobade ; ofono(a)ofono.org
Subject: AW: Regarding ofonod sending signal 11 after calling setup_sim7x00 
for sim7600

Hi,

ofono assumes that you use a USB interface with multiple serial interfaces.

I suppose the second DBG in setup_sim7x00() failed because of a NULL in 
info->number.

Do you force ofono to detect a sim7600 at /dev/ttymxc1?

Best regards,
  Stefan

-----Ursprüngliche Nachricht-----
Von: ofono [mailto:ofono-bounces(a)ofono.org] Im Auftrag von Pranoti Bobade
Gesendet: Montag, 20. Mai 2019 09:35
An: ofono(a)ofono.org
Betreff: Fw: Regarding ofonod sending signal 11 after calling setup_sim7x00 
for sim7600



-----Original Message-----
From: Pranoti Bobade
Sent: Friday, May 17, 2019 5:28 PM
To: mailman(a)ofono.org
Subject: Regarding ofonod sending signal 11 after calling setup_sim7x00 for
sim7600

Hello,

Hope you are doing well. We are currently working with ofono to make 
sim7600e work with our ARM based embedded board. Our modem is connected 
through serial interface. We have cloned the latest git repository for ofono 
and compiled it for our board, But when we run ofonod it gives segmentation 
fault in setup_sim7x00() from plugins/udevng.c. Screenshot is attached with 
the mail for reference. Our query is to know if there is support for Serial 
interface of sim7600e.

Thanks in advance.