All of lore.kernel.org
 help / color / mirror / Atom feed
* [meta-fsl-ppc] u-boot recipe do_compile fail on master
@ 2014-01-30  9:51 Ahsan, Noor
  2014-02-02  1:43 ` ting.liu
  0 siblings, 1 reply; 5+ messages in thread
From: Ahsan, Noor @ 2014-01-30  9:51 UTC (permalink / raw)
  To: meta-freescale; +Cc: Mahmood, Muzaffar

[-- Attachment #1: Type: text/plain, Size: 1832 bytes --]

Hello,

We are building u-boot from master but its do_compile is failing. Kindly help us in order to resolve the issue. Log is attached



U-boot recipe is failing on P1010RDB. Log file is attached.

ERROR: Function failed: do_compile (log file is located at
/home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/temp/log.do_compile.46367)
ERROR: Logfile of failure stored in: 
/home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/temp/log.do_compile.46367
Log data follows:
  DEBUG: Executing shell function do_compile
  NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu- CC=powerpc-linux-gnu-gcc --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb
O=P1010RDB_NAND distclean
  rm -rf
/home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB_NAND/*
  NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu- CC=powerpc-linux-gnu-gcc --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb
O=P1010RDB_NAND P1010RDB_NAND
  make: Nothing to be done for `P1010RDB_NAND'.
  NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu- CC=powerpc-linux-gnu-gcc --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb
O=P1010RDB_NAND all
  System not configured - see README
  make: *** [all] Error 1
  ERROR: oe_runmake failed
  WARNING: 
/home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/temp/run.do_compile.46367:1
exit 1 from
    exit 1
  ERROR: Function failed: do_compile (log file is located at
/home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/temp/log.do_compile.46367)
ERROR: Task 6
(/home/mmahmood/mel/meta-fsl-ppc/recipes-bsp/u-boot/u-boot_git.bb,
do_compile) failed with exit code '1'


Thanks
Regards
Muzaffar Mahmood


[-- Attachment #2: log.do_compile.46367 --]
[-- Type: text/plain, Size: 1095 bytes --]

DEBUG: Executing shell function do_compile
NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu- CC=powerpc-linux-gnu-gcc  --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb O=P1010RDB_NAND distclean
rm -rf /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB_NAND/*
NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu- CC=powerpc-linux-gnu-gcc  --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb O=P1010RDB_NAND P1010RDB_NAND
make: Nothing to be done for `P1010RDB_NAND'.
NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu- CC=powerpc-linux-gnu-gcc  --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb O=P1010RDB_NAND all
System not configured - see README
make: *** [all] Error 1
ERROR: oe_runmake failed
WARNING: /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/temp/run.do_compile.46367:1 exit 1 from
  exit 1
ERROR: Function failed: do_compile (log file is located at /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/temp/log.do_compile.46367)

^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [meta-fsl-ppc] u-boot recipe do_compile fail on master
  2014-01-30  9:51 [meta-fsl-ppc] u-boot recipe do_compile fail on master Ahsan, Noor
@ 2014-02-02  1:43 ` ting.liu
  2014-02-07  7:48   ` Ahsan, Noor
  0 siblings, 1 reply; 5+ messages in thread
From: ting.liu @ 2014-02-02  1:43 UTC (permalink / raw)
  To: Ahsan, Noor, meta-freescale; +Cc: Mahmood, Muzaffar

> -----Original Message-----
> From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-
> bounces@yoctoproject.org] On Behalf Of Ahsan, Noor
> Sent: Thursday, January 30, 2014 5:52 PM
> To: meta-freescale@yoctoproject.org
> Cc: Mahmood, Muzaffar
> Subject: [meta-freescale] [meta-fsl-ppc] u-boot recipe do_compile fail on
> master
> 
> Hello,
> 
> We are building u-boot from master but its do_compile is failing. Kindly
> help us in order to resolve the issue. Log is attached
> 
> 
> 
> U-boot recipe is failing on P1010RDB. Log file is attached.
> 
> ERROR: Function failed: do_compile (log file is located at
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/temp/log.do_compile.46367)
> ERROR: Logfile of failure stored in:
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/temp/log.do_compile.46367
> Log data follows:
>   DEBUG: Executing shell function do_compile
>   NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu- CC=powerpc-linux-gnu-
> gcc --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb
> O=P1010RDB_NAND distclean
>   rm -rf
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/P1010RDB_NAND/*
>   NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu- CC=powerpc-linux-gnu-
> gcc --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb
> O=P1010RDB_NAND P1010RDB_NAND
>   make: Nothing to be done for `P1010RDB_NAND'.
>   NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu- CC=powerpc-linux-gnu-
> gcc --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb
> O=P1010RDB_NAND all
>   System not configured - see README

Seems that you are not using master branch. Now it's P1010RDB-PB_NAND instead of P1010RDB_NAND.
http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-ppc/tree/conf/machine/p1010rdb.conf

>   make: *** [all] Error 1
>   ERROR: oe_runmake failed
>   WARNING:
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/temp/run.do_compile.46367:1
> exit 1 from
>     exit 1
>   ERROR: Function failed: do_compile (log file is located at
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/temp/log.do_compile.46367)
> ERROR: Task 6
> (/home/mmahmood/mel/meta-fsl-ppc/recipes-bsp/u-boot/u-boot_git.bb,
> do_compile) failed with exit code '1'
> 
> 
> Thanks
> Regards
> Muzaffar Mahmood



^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [meta-fsl-ppc] u-boot recipe do_compile fail on master
  2014-02-02  1:43 ` ting.liu
@ 2014-02-07  7:48   ` Ahsan, Noor
  2014-02-07  8:12     ` ting.liu
  0 siblings, 1 reply; 5+ messages in thread
From: Ahsan, Noor @ 2014-02-07  7:48 UTC (permalink / raw)
  To: ting.liu, meta-freescale; +Cc: Mahmood, Muzaffar

Hello,

Sorry this log was incorrect. I sent correct log but it was not able to reach mailing list due to size limitations. Anyways following is the error we get when we build from master


powerpc-linux-gnu-ld.bfd  -n -r -o /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/lib/libgeneric.o  /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/lib/crc32.o /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/lib/ctype.o /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/lib/display_options.o /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/lib/div64.o /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/lib/errno.o /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/lib/hashtable.o /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/lib/linux_string.o /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/lib/string.o /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/lib/time.o /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/lib/vsprintf.o
make[2]: Leaving directory `/home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/lib'
cd /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/ && powerpc-linux-gnu-ld.bfd  -n -T /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl.lds --gc-sections --gc-sections -Bstatic -Ttext 0xD0001000 arch/powerpc/cpu/mpc85xx/start.o arch/powerpc/cpu/mpc85xx/resetvec.o --start-group arch/powerpc/cpu/mpc85xx/libmpc85xx.o arch/powerpc/cpu/mpc8xxx/ddr/libddr.o arch/powerpc/cpu/mpc8xxx/lib8xxx.o arch/powerpc/lib/libpowerpc.o board/freescale/common/libfreescale.o board/freescale/p1010rdb/libp1010rdb.o common/libcommon.o drivers/i2c/libi2c.o drivers/mtd/spi/libspi_flash.o drivers/serial/libserial.o drivers/spi/libspi.o lib/libgeneric.o --end-group -L /home/mel/MentorGraphics/Sourcery_CodeBench_for_Power_Embedded/bin/../lib/gcc/powerpc-linux-gnu/4.8.1/nof -lgcc -Map u-boot-spl.map -o u-boot-spl
powerpc-linux-gnu-objcopy --gap-fill=0xff -O binary /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl.bin
powerpc-linux-gnu-objcopy -O srec /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/u-boot /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/u-boot.srec
make[1]: Leaving directory `/home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/spl'
powerpc-linux-gnu-objcopy --gap-fill=0xff -O binary /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/u-boot /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/u-boot.bin
powerpc-linux-gnu-objcopy --gap-fill=0xff --pad-to=0x18000 -I binary -O binary /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl.bin /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl-pad.bin; cat /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl-pad.bin /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/u-boot.bin > /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/u-boot-with-spl.bin; rm /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl-pad.bin
make -C examples/standalone all
make -C examples/api all
make[1]: Entering directory `/home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/examples/api'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/examples/api'
make[1]: Entering directory `/home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/examples/standalone'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/examples/standalone'
It is a little endian machine.
Fail to read file "/home/mmahmood/mel/build-p1010r/tmp/sysroots/x86_64-linux/usr/share/boot_format/config_sram_p1010rdb.dat". Pls check whether it exists and verify your read permission.
WARNING: /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/temp/run.do_compile.38659:1 exit 251 from
  /home/mmahmood/mel/build-p1010r/tmp/sysroots/x86_64-linux/usr/bin/boot_format /home/mmahmood/mel/build-p1010r/tmp/sysroots/x86_64-linux/usr/share/boot_format/config_sram_p1010rdb.dat /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/${board}/${UBOOT_SOURCE}.bin -spi /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/${board}/${UBOOT_TARGET}.bin
ERROR: Function failed: do_compile (log file is located at /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/temp/log.do_compile.38659)

The start of the log file that we have shows that we are using P1010RDB-PB_NAND


DEBUG: Executing shell function do_compile
NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu- CC=powerpc-linux-gnu-gcc  --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb O=P1010RDB-PB_NAND distclean
rm -rf /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_NAND/*
NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu- CC=powerpc-linux-gnu-gcc  --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb O=P1010RDB-PB_NAND P1010RDB-PB_NAND
Configuring for P1010RDB-PB_NAND - Board: P1010RDB, Options: P1010RDB_PB,NAND

Noor

-----Original Message-----
From: ting.liu@freescale.com [mailto:ting.liu@freescale.com] 
Sent: Sunday, February 02, 2014 6:44 AM
To: Ahsan, Noor; meta-freescale@yoctoproject.org
Cc: Mahmood, Muzaffar
Subject: RE: [meta-freescale] [meta-fsl-ppc] u-boot recipe do_compile fail on master

> -----Original Message-----
> From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale- 
> bounces@yoctoproject.org] On Behalf Of Ahsan, Noor
> Sent: Thursday, January 30, 2014 5:52 PM
> To: meta-freescale@yoctoproject.org
> Cc: Mahmood, Muzaffar
> Subject: [meta-freescale] [meta-fsl-ppc] u-boot recipe do_compile fail 
> on master
> 
> Hello,
> 
> We are building u-boot from master but its do_compile is failing. 
> Kindly help us in order to resolve the issue. Log is attached
> 
> 
> 
> U-boot recipe is failing on P1010RDB. Log file is attached.
> 
> ERROR: Function failed: do_compile (log file is located at
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/temp/log.do_compile.46367)
> ERROR: Logfile of failure stored in:
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/temp/log.do_compile.46367
> Log data follows:
>   DEBUG: Executing shell function do_compile
>   NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu- 
> CC=powerpc-linux-gnu- gcc 
> --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb
> O=P1010RDB_NAND distclean
>   rm -rf
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/P1010RDB_NAND/*
>   NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu- 
> CC=powerpc-linux-gnu- gcc 
> --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb
> O=P1010RDB_NAND P1010RDB_NAND
>   make: Nothing to be done for `P1010RDB_NAND'.
>   NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu- 
> CC=powerpc-linux-gnu- gcc 
> --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb
> O=P1010RDB_NAND all
>   System not configured - see README

Seems that you are not using master branch. Now it's P1010RDB-PB_NAND instead of P1010RDB_NAND.
http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-ppc/tree/conf/machine/p1010rdb.conf

>   make: *** [all] Error 1
>   ERROR: oe_runmake failed
>   WARNING:
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/temp/run.do_compile.46367:1
> exit 1 from
>     exit 1
>   ERROR: Function failed: do_compile (log file is located at
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/temp/log.do_compile.46367)
> ERROR: Task 6
> (/home/mmahmood/mel/meta-fsl-ppc/recipes-bsp/u-boot/u-boot_git.bb,
> do_compile) failed with exit code '1'
> 
> 
> Thanks
> Regards
> Muzaffar Mahmood



^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [meta-fsl-ppc] u-boot recipe do_compile fail on master
  2014-02-07  7:48   ` Ahsan, Noor
@ 2014-02-07  8:12     ` ting.liu
  2014-02-07 10:45       ` Ahsan, Noor
  0 siblings, 1 reply; 5+ messages in thread
From: ting.liu @ 2014-02-07  8:12 UTC (permalink / raw)
  To: Ahsan, Noor, meta-freescale; +Cc: Mahmood, Muzaffar

> -----Original Message-----
> From: Ahsan, Noor [mailto:Noor_Ahsan@mentor.com]
> Sent: Friday, February 07, 2014 3:48 PM
> To: Liu Ting-B28495; meta-freescale@yoctoproject.org
> Cc: Mahmood, Muzaffar
> Subject: RE: [meta-freescale] [meta-fsl-ppc] u-boot recipe do_compile
> fail on master
> 
> Hello,
> 
> Sorry this log was incorrect. I sent correct log but it was not able to
> reach mailing list due to size limitations. Anyways following is the
> error we get when we build from master
> 
> 
> powerpc-linux-gnu-ld.bfd  -n -r -o /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/libgeneric.o  /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/crc32.o /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/ctype.o /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/display_options.o /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/div64.o /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/errno.o /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/hashtable.o /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/linux_string.o /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/string.o /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/time.o /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/vsprintf.o
> make[2]: Leaving directory `/home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/lib'
> cd /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/ && powerpc-linux-gnu-ld.bfd  -
> n -T /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-
> gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl.lds --gc-
> sections --gc-sections -Bstatic -Ttext 0xD0001000
> arch/powerpc/cpu/mpc85xx/start.o arch/powerpc/cpu/mpc85xx/resetvec.o --
> start-group arch/powerpc/cpu/mpc85xx/libmpc85xx.o
> arch/powerpc/cpu/mpc8xxx/ddr/libddr.o arch/powerpc/cpu/mpc8xxx/lib8xxx.o
> arch/powerpc/lib/libpowerpc.o board/freescale/common/libfreescale.o
> board/freescale/p1010rdb/libp1010rdb.o common/libcommon.o
> drivers/i2c/libi2c.o drivers/mtd/spi/libspi_flash.o
> drivers/serial/libserial.o drivers/spi/libspi.o lib/libgeneric.o --end-
> group -L
> /home/mel/MentorGraphics/Sourcery_CodeBench_for_Power_Embedded/bin/../lib
> /gcc/powerpc-linux-gnu/4.8.1/nof -lgcc -Map u-boot-spl.map -o u-boot-spl
> powerpc-linux-gnu-objcopy --gap-fill=0xff -O binary
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl.bin
> powerpc-linux-gnu-objcopy -O srec /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/u-boot /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-
> linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/u-boot.srec
> make[1]: Leaving directory `/home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/spl'
> powerpc-linux-gnu-objcopy --gap-fill=0xff -O binary
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/P1010RDB-PB_SPIFLASH/u-boot /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/u-boot.bin
> powerpc-linux-gnu-objcopy --gap-fill=0xff --pad-to=0x18000 -I binary -O
> binary /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-
> gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl.bin
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl-pad.bin; cat
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl-pad.bin
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/P1010RDB-PB_SPIFLASH/u-boot.bin >
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/P1010RDB-PB_SPIFLASH/u-boot-with-spl.bin; rm
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl-pad.bin
> make -C examples/standalone all
> make -C examples/api all
> make[1]: Entering directory `/home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-
> r30/git/examples/api'
> make[1]: Nothing to be done for `all'.
> make[1]: Leaving directory `/home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-
> r30/git/examples/api'
> make[1]: Entering directory `/home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-
> r30/git/examples/standalone'
> make[1]: Nothing to be done for `all'.
> make[1]: Leaving directory `/home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-
> r30/git/examples/standalone'
> It is a little endian machine.
> Fail to read file "/home/mmahmood/mel/build-p1010r/tmp/sysroots/x86_64-
> linux/usr/share/boot_format/config_sram_p1010rdb.dat". Pls check whether
> it exists and verify your read permission.

Please check if the file exist or not.
And also check the boot_format recipe:
http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-ppc/tree/recipes-bsp/boot-format/boot-format_git.bb


> WARNING: /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-
> gnuspe/u-boot/git-r30/temp/run.do_compile.38659:1 exit 251 from
>   /home/mmahmood/mel/build-p1010r/tmp/sysroots/x86_64-
> linux/usr/bin/boot_format /home/mmahmood/mel/build-
> p1010r/tmp/sysroots/x86_64-
> linux/usr/share/boot_format/config_sram_p1010rdb.dat
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/${board}/${UBOOT_SOURCE}.bin -spi
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/${board}/${UBOOT_TARGET}.bin
> ERROR: Function failed: do_compile (log file is located at
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/temp/log.do_compile.38659)
> 
> The start of the log file that we have shows that we are using P1010RDB-
> PB_NAND
> 
> 
> DEBUG: Executing shell function do_compile
> NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu- CC=powerpc-linux-gnu-gcc
> --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb
> O=P1010RDB-PB_NAND distclean rm -rf /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_NAND/*
> NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu- CC=powerpc-linux-gnu-gcc
> --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb
> O=P1010RDB-PB_NAND P1010RDB-PB_NAND Configuring for P1010RDB-PB_NAND -
> Board: P1010RDB, Options: P1010RDB_PB,NAND
> 
> Noor
> 
> -----Original Message-----
> From: ting.liu@freescale.com [mailto:ting.liu@freescale.com]
> Sent: Sunday, February 02, 2014 6:44 AM
> To: Ahsan, Noor; meta-freescale@yoctoproject.org
> Cc: Mahmood, Muzaffar
> Subject: RE: [meta-freescale] [meta-fsl-ppc] u-boot recipe do_compile
> fail on master
> 
> > -----Original Message-----
> > From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-
> > bounces@yoctoproject.org] On Behalf Of Ahsan, Noor
> > Sent: Thursday, January 30, 2014 5:52 PM
> > To: meta-freescale@yoctoproject.org
> > Cc: Mahmood, Muzaffar
> > Subject: [meta-freescale] [meta-fsl-ppc] u-boot recipe do_compile fail
> > on master
> >
> > Hello,
> >
> > We are building u-boot from master but its do_compile is failing.
> > Kindly help us in order to resolve the issue. Log is attached
> >
> >
> >
> > U-boot recipe is failing on P1010RDB. Log file is attached.
> >
> > ERROR: Function failed: do_compile (log file is located at
> > /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> > boot/git-r30/temp/log.do_compile.46367)
> > ERROR: Logfile of failure stored in:
> > /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> > boot/git-r30/temp/log.do_compile.46367
> > Log data follows:
> >   DEBUG: Executing shell function do_compile
> >   NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu-
> > CC=powerpc-linux-gnu- gcc
> > --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb
> > O=P1010RDB_NAND distclean
> >   rm -rf
> > /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> > boot/git-r30/git/P1010RDB_NAND/*
> >   NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu-
> > CC=powerpc-linux-gnu- gcc
> > --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb
> > O=P1010RDB_NAND P1010RDB_NAND
> >   make: Nothing to be done for `P1010RDB_NAND'.
> >   NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu-
> > CC=powerpc-linux-gnu- gcc
> > --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb
> > O=P1010RDB_NAND all
> >   System not configured - see README
> 
> Seems that you are not using master branch. Now it's P1010RDB-PB_NAND
> instead of P1010RDB_NAND.
> http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-
> ppc/tree/conf/machine/p1010rdb.conf
> 
> >   make: *** [all] Error 1
> >   ERROR: oe_runmake failed
> >   WARNING:
> > /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> > boot/git-r30/temp/run.do_compile.46367:1
> > exit 1 from
> >     exit 1
> >   ERROR: Function failed: do_compile (log file is located at
> > /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> > boot/git-r30/temp/log.do_compile.46367)
> > ERROR: Task 6
> > (/home/mmahmood/mel/meta-fsl-ppc/recipes-bsp/u-boot/u-boot_git.bb,
> > do_compile) failed with exit code '1'
> >
> >
> > Thanks
> > Regards
> > Muzaffar Mahmood
> 
> 



^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [meta-fsl-ppc] u-boot recipe do_compile fail on master
  2014-02-07  8:12     ` ting.liu
@ 2014-02-07 10:45       ` Ahsan, Noor
  0 siblings, 0 replies; 5+ messages in thread
From: Ahsan, Noor @ 2014-02-07 10:45 UTC (permalink / raw)
  To: ting.liu, meta-freescale; +Cc: Mahmood, Muzaffar

Thanks. It fixed the problem. My boot-format recipe was not correct.

Noor

-----Original Message-----
From: ting.liu@freescale.com [mailto:ting.liu@freescale.com] 
Sent: Friday, February 07, 2014 1:13 PM
To: Ahsan, Noor; meta-freescale@yoctoproject.org
Cc: Mahmood, Muzaffar
Subject: RE: [meta-freescale] [meta-fsl-ppc] u-boot recipe do_compile fail on master

> -----Original Message-----
> From: Ahsan, Noor [mailto:Noor_Ahsan@mentor.com]
> Sent: Friday, February 07, 2014 3:48 PM
> To: Liu Ting-B28495; meta-freescale@yoctoproject.org
> Cc: Mahmood, Muzaffar
> Subject: RE: [meta-freescale] [meta-fsl-ppc] u-boot recipe do_compile 
> fail on master
> 
> Hello,
> 
> Sorry this log was incorrect. I sent correct log but it was not able 
> to reach mailing list due to size limitations. Anyways following is 
> the error we get when we build from master
> 
> 
> powerpc-linux-gnu-ld.bfd  -n -r -o /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/libgeneric.o  /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/crc32.o /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/ctype.o /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/display_options.o /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/div64.o /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/errno.o /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/hashtable.o /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/linux_string.o /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/string.o /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/time.o /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/spl/lib/vsprintf.o
> make[2]: Leaving directory `/home/mmahmood/mel/build- 
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/lib'
> cd 
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/ && powerpc-linux-gnu-ld.bfd  
> - n -T /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-
> gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl.lds 
> --gc- sections --gc-sections -Bstatic -Ttext 0xD0001000 
> arch/powerpc/cpu/mpc85xx/start.o arch/powerpc/cpu/mpc85xx/resetvec.o 
> -- start-group arch/powerpc/cpu/mpc85xx/libmpc85xx.o
> arch/powerpc/cpu/mpc8xxx/ddr/libddr.o 
> arch/powerpc/cpu/mpc8xxx/lib8xxx.o
> arch/powerpc/lib/libpowerpc.o board/freescale/common/libfreescale.o
> board/freescale/p1010rdb/libp1010rdb.o common/libcommon.o 
> drivers/i2c/libi2c.o drivers/mtd/spi/libspi_flash.o 
> drivers/serial/libserial.o drivers/spi/libspi.o lib/libgeneric.o 
> --end- group -L 
> /home/mel/MentorGraphics/Sourcery_CodeBench_for_Power_Embedded/bin/../
> lib /gcc/powerpc-linux-gnu/4.8.1/nof -lgcc -Map u-boot-spl.map -o 
> u-boot-spl powerpc-linux-gnu-objcopy --gap-fill=0xff -O binary
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl.bin
> powerpc-linux-gnu-objcopy -O srec /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/u-boot 
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-
> linux-gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/u-boot.srec
> make[1]: Leaving directory `/home/mmahmood/mel/build- 
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/spl'
> powerpc-linux-gnu-objcopy --gap-fill=0xff -O binary
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/P1010RDB-PB_SPIFLASH/u-boot /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_SPIFLASH/u-boot.bin
> powerpc-linux-gnu-objcopy --gap-fill=0xff --pad-to=0x18000 -I binary 
> -O binary /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-
> gnuspe/u-boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl.bin
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl-pad.bin; cat
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl-pad.bin
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/P1010RDB-PB_SPIFLASH/u-boot.bin >
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/P1010RDB-PB_SPIFLASH/u-boot-with-spl.bin; rm
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/P1010RDB-PB_SPIFLASH/spl/u-boot-spl-pad.bin
> make -C examples/standalone all
> make -C examples/api all
> make[1]: Entering directory `/home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-
> r30/git/examples/api'
> make[1]: Nothing to be done for `all'.
> make[1]: Leaving directory `/home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-
> r30/git/examples/api'
> make[1]: Entering directory `/home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-
> r30/git/examples/standalone'
> make[1]: Nothing to be done for `all'.
> make[1]: Leaving directory `/home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-
> r30/git/examples/standalone'
> It is a little endian machine.
> Fail to read file 
> "/home/mmahmood/mel/build-p1010r/tmp/sysroots/x86_64-
> linux/usr/share/boot_format/config_sram_p1010rdb.dat". Pls check 
> whether it exists and verify your read permission.

Please check if the file exist or not.
And also check the boot_format recipe:
http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-ppc/tree/recipes-bsp/boot-format/boot-format_git.bb


> WARNING: /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-
> gnuspe/u-boot/git-r30/temp/run.do_compile.38659:1 exit 251 from
>   /home/mmahmood/mel/build-p1010r/tmp/sysroots/x86_64-
> linux/usr/bin/boot_format /home/mmahmood/mel/build-
> p1010r/tmp/sysroots/x86_64-
> linux/usr/share/boot_format/config_sram_p1010rdb.dat
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/${board}/${UBOOT_SOURCE}.bin -spi
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/git/${board}/${UBOOT_TARGET}.bin
> ERROR: Function failed: do_compile (log file is located at
> /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-
> boot/git-r30/temp/log.do_compile.38659)
> 
> The start of the log file that we have shows that we are using 
> P1010RDB- PB_NAND
> 
> 
> DEBUG: Executing shell function do_compile
> NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu- 
> CC=powerpc-linux-gnu-gcc 
> --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb
> O=P1010RDB-PB_NAND distclean rm -rf /home/mmahmood/mel/build-
> p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u-boot/git-r30/git/P1010RDB-
> PB_NAND/*
> NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu- 
> CC=powerpc-linux-gnu-gcc 
> --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb
> O=P1010RDB-PB_NAND P1010RDB-PB_NAND Configuring for P1010RDB-PB_NAND -
> Board: P1010RDB, Options: P1010RDB_PB,NAND
> 
> Noor
> 
> -----Original Message-----
> From: ting.liu@freescale.com [mailto:ting.liu@freescale.com]
> Sent: Sunday, February 02, 2014 6:44 AM
> To: Ahsan, Noor; meta-freescale@yoctoproject.org
> Cc: Mahmood, Muzaffar
> Subject: RE: [meta-freescale] [meta-fsl-ppc] u-boot recipe do_compile 
> fail on master
> 
> > -----Original Message-----
> > From: meta-freescale-bounces@yoctoproject.org 
> > [mailto:meta-freescale- bounces@yoctoproject.org] On Behalf Of 
> > Ahsan, Noor
> > Sent: Thursday, January 30, 2014 5:52 PM
> > To: meta-freescale@yoctoproject.org
> > Cc: Mahmood, Muzaffar
> > Subject: [meta-freescale] [meta-fsl-ppc] u-boot recipe do_compile 
> > fail on master
> >
> > Hello,
> >
> > We are building u-boot from master but its do_compile is failing.
> > Kindly help us in order to resolve the issue. Log is attached
> >
> >
> >
> > U-boot recipe is failing on P1010RDB. Log file is attached.
> >
> > ERROR: Function failed: do_compile (log file is located at
> > /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u
> > -
> > boot/git-r30/temp/log.do_compile.46367)
> > ERROR: Logfile of failure stored in:
> > /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u
> > -
> > boot/git-r30/temp/log.do_compile.46367
> > Log data follows:
> >   DEBUG: Executing shell function do_compile
> >   NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu-
> > CC=powerpc-linux-gnu- gcc
> > --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb
> > O=P1010RDB_NAND distclean
> >   rm -rf
> > /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u
> > -
> > boot/git-r30/git/P1010RDB_NAND/*
> >   NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu-
> > CC=powerpc-linux-gnu- gcc
> > --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb
> > O=P1010RDB_NAND P1010RDB_NAND
> >   make: Nothing to be done for `P1010RDB_NAND'.
> >   NOTE: make -j64 CROSS_COMPILE=powerpc-linux-gnu-
> > CC=powerpc-linux-gnu- gcc
> > --sysroot=/home/mmahmood/mel/build-p1010r/tmp/sysroots/p1010rdb
> > O=P1010RDB_NAND all
> >   System not configured - see README
> 
> Seems that you are not using master branch. Now it's P1010RDB-PB_NAND 
> instead of P1010RDB_NAND.
> http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-
> ppc/tree/conf/machine/p1010rdb.conf
> 
> >   make: *** [all] Error 1
> >   ERROR: oe_runmake failed
> >   WARNING:
> > /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u
> > -
> > boot/git-r30/temp/run.do_compile.46367:1
> > exit 1 from
> >     exit 1
> >   ERROR: Function failed: do_compile (log file is located at
> > /home/mmahmood/mel/build-p1010r/tmp/work/p1010rdb-mel-linux-gnuspe/u
> > -
> > boot/git-r30/temp/log.do_compile.46367)
> > ERROR: Task 6
> > (/home/mmahmood/mel/meta-fsl-ppc/recipes-bsp/u-boot/u-boot_git.bb,
> > do_compile) failed with exit code '1'
> >
> >
> > Thanks
> > Regards
> > Muzaffar Mahmood
> 
> 



^ permalink raw reply	[flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-02-07 10:45 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-01-30  9:51 [meta-fsl-ppc] u-boot recipe do_compile fail on master Ahsan, Noor
2014-02-02  1:43 ` ting.liu
2014-02-07  7:48   ` Ahsan, Noor
2014-02-07  8:12     ` ting.liu
2014-02-07 10:45       ` Ahsan, Noor

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.