* [PATCH v2] ARM: amlogic: update JetHub D1/H1 configs (was: add SYS_LOAD_ADDR to JetHub D1/H1 configs)
@ 2021-10-06 15:11 Vyacheslav Bocharov
2021-10-07 8:10 ` Neil Armstrong
0 siblings, 1 reply; 2+ messages in thread
From: Vyacheslav Bocharov @ 2021-10-06 15:11 UTC (permalink / raw)
To: Neil Armstrong; +Cc: u-boot, u-boot-amlogic
- late fix for 49c8ef0e45a91ec894ef15e7d043dafe8f1c5efd commit by Tom Rini.
- enable i2c, rtc, eeprom
Changes:
- add i2c, rtc, eeprom
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
---
configs/jethub_j100_defconfig | 8 ++++++++
configs/jethub_j80_defconfig | 8 ++++++++
2 files changed, 16 insertions(+)
diff --git a/configs/jethub_j100_defconfig b/configs/jethub_j100_defconfig
index 290ce4db85..533f251855 100644
--- a/configs/jethub_j100_defconfig
+++ b/configs/jethub_j100_defconfig
@@ -11,21 +11,27 @@ CONFIG_DEBUG_UART_BASE=0xff803000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" jethubj100"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_MISC_INIT_R=y
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
+CONFIG_CMD_EEPROM=y
CONFIG_CMD_GPIO=y
CONFIG_RANDOM_UUID=y
+CONFIG_CMD_I2C=y
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_RTC=y
CONFIG_CMD_REGULATOR=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_OF_CONTROL=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MESON=y
CONFIG_MMC_MESON_GX=y
CONFIG_MTD_UBI=y
CONFIG_PHY_REALTEK=y
@@ -37,6 +43,8 @@ CONFIG_PINCTRL_MESON_AXG=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_RESET=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF8563=y
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_MESON_SERIAL=y
diff --git a/configs/jethub_j80_defconfig b/configs/jethub_j80_defconfig
index 7db05af3b0..ad6bec0c43 100644
--- a/configs/jethub_j80_defconfig
+++ b/configs/jethub_j80_defconfig
@@ -12,25 +12,31 @@ CONFIG_DEBUG_UART_BASE=0xc81004c0
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" jethubj80"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_CONSOLE_MUX=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_MISC_INIT_R=y
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
+CONFIG_CMD_EEPROM=y
CONFIG_CMD_ADC=y
CONFIG_CMD_GPIO=y
CONFIG_RANDOM_UUID=y
+CONFIG_CMD_I2C=y
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_RTC=y
CONFIG_CMD_REGULATOR=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_OF_CONTROL=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SARADC_MESON=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MESON=y
CONFIG_MMC_MESON_GX=y
CONFIG_MTD_UBI=y
CONFIG_PHY_MESON_GXL=y
@@ -45,6 +51,8 @@ CONFIG_PINCTRL_MESON_GXL=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_RESET=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF8563=y
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_MESON_SERIAL=y
--
2.30.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] ARM: amlogic: update JetHub D1/H1 configs (was: add SYS_LOAD_ADDR to JetHub D1/H1 configs)
2021-10-06 15:11 [PATCH v2] ARM: amlogic: update JetHub D1/H1 configs (was: add SYS_LOAD_ADDR to JetHub D1/H1 configs) Vyacheslav Bocharov
@ 2021-10-07 8:10 ` Neil Armstrong
0 siblings, 0 replies; 2+ messages in thread
From: Neil Armstrong @ 2021-10-07 8:10 UTC (permalink / raw)
To: Vyacheslav Bocharov; +Cc: u-boot, u-boot-amlogic
Hi,
On 06/10/2021 17:11, Vyacheslav Bocharov wrote:
> - late fix for 49c8ef0e45a91ec894ef15e7d043dafe8f1c5efd commit by Tom Rini.
> - enable i2c, rtc, eeprom
thanks, I'll squash it on the previous patch on my u-boot-amlogic-next tree.
Neil
>
> Changes:
> - add i2c, rtc, eeprom
>
> Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
> ---
> configs/jethub_j100_defconfig | 8 ++++++++
> configs/jethub_j80_defconfig | 8 ++++++++
> 2 files changed, 16 insertions(+)
>
> diff --git a/configs/jethub_j100_defconfig b/configs/jethub_j100_defconfig
> index 290ce4db85..533f251855 100644
> --- a/configs/jethub_j100_defconfig
> +++ b/configs/jethub_j100_defconfig
> @@ -11,21 +11,27 @@ CONFIG_DEBUG_UART_BASE=0xff803000
> CONFIG_DEBUG_UART_CLOCK=24000000
> CONFIG_IDENT_STRING=" jethubj100"
> CONFIG_DEBUG_UART=y
> +CONFIG_SYS_LOAD_ADDR=0x01000000
> CONFIG_OF_BOARD_SETUP=y
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_MISC_INIT_R=y
> # CONFIG_CMD_BDI is not set
> # CONFIG_CMD_IMI is not set
> +CONFIG_CMD_EEPROM=y
> CONFIG_CMD_GPIO=y
> CONFIG_RANDOM_UUID=y
> +CONFIG_CMD_I2C=y
> # CONFIG_CMD_LOADS is not set
> CONFIG_CMD_MMC=y
> CONFIG_CMD_USB=y
> CONFIG_CMD_USB_MASS_STORAGE=y
> +CONFIG_CMD_RTC=y
> CONFIG_CMD_REGULATOR=y
> CONFIG_PARTITION_TYPE_GUID=y
> CONFIG_OF_CONTROL=y
> CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_DM_I2C=y
> +CONFIG_SYS_I2C_MESON=y
> CONFIG_MMC_MESON_GX=y
> CONFIG_MTD_UBI=y
> CONFIG_PHY_REALTEK=y
> @@ -37,6 +43,8 @@ CONFIG_PINCTRL_MESON_AXG=y
> CONFIG_DM_REGULATOR=y
> CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_DM_RESET=y
> +CONFIG_DM_RTC=y
> +CONFIG_RTC_PCF8563=y
> CONFIG_DEBUG_UART_ANNOUNCE=y
> CONFIG_DEBUG_UART_SKIP_INIT=y
> CONFIG_MESON_SERIAL=y
> diff --git a/configs/jethub_j80_defconfig b/configs/jethub_j80_defconfig
> index 7db05af3b0..ad6bec0c43 100644
> --- a/configs/jethub_j80_defconfig
> +++ b/configs/jethub_j80_defconfig
> @@ -12,25 +12,31 @@ CONFIG_DEBUG_UART_BASE=0xc81004c0
> CONFIG_DEBUG_UART_CLOCK=24000000
> CONFIG_IDENT_STRING=" jethubj80"
> CONFIG_DEBUG_UART=y
> +CONFIG_SYS_LOAD_ADDR=0x01000000
> CONFIG_OF_BOARD_SETUP=y
> CONFIG_CONSOLE_MUX=y
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_MISC_INIT_R=y
> # CONFIG_CMD_BDI is not set
> # CONFIG_CMD_IMI is not set
> +CONFIG_CMD_EEPROM=y
> CONFIG_CMD_ADC=y
> CONFIG_CMD_GPIO=y
> CONFIG_RANDOM_UUID=y
> +CONFIG_CMD_I2C=y
> # CONFIG_CMD_LOADS is not set
> CONFIG_CMD_MMC=y
> CONFIG_CMD_USB=y
> CONFIG_CMD_USB_MASS_STORAGE=y
> +CONFIG_CMD_RTC=y
> CONFIG_CMD_REGULATOR=y
> CONFIG_PARTITION_TYPE_GUID=y
> CONFIG_OF_CONTROL=y
> CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> CONFIG_NET_RANDOM_ETHADDR=y
> CONFIG_SARADC_MESON=y
> +CONFIG_DM_I2C=y
> +CONFIG_SYS_I2C_MESON=y
> CONFIG_MMC_MESON_GX=y
> CONFIG_MTD_UBI=y
> CONFIG_PHY_MESON_GXL=y
> @@ -45,6 +51,8 @@ CONFIG_PINCTRL_MESON_GXL=y
> CONFIG_DM_REGULATOR=y
> CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_DM_RESET=y
> +CONFIG_DM_RTC=y
> +CONFIG_RTC_PCF8563=y
> CONFIG_DEBUG_UART_ANNOUNCE=y
> CONFIG_DEBUG_UART_SKIP_INIT=y
> CONFIG_MESON_SERIAL=y
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-10-07 8:11 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-06 15:11 [PATCH v2] ARM: amlogic: update JetHub D1/H1 configs (was: add SYS_LOAD_ADDR to JetHub D1/H1 configs) Vyacheslav Bocharov
2021-10-07 8:10 ` Neil Armstrong
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.