[PATCH 4.9 000/103] 4.9.190-stable review

[PATCH 4.9 000/103] 4.9.190-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.190 release.
There are 103 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat 24 Aug 2019 05:15:44 PM UTC.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.190-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.190-rc1

YueHaibing <yuehaibing@huawei.com>
    bonding: Add vlan tx offload to hw_enc_features

YueHaibing <yuehaibing@huawei.com>
    team: Add vlan tx offload to hw_enc_features

Maxim Mikityanskiy <maximmi@mellanox.com>
    net/mlx5e: Use flow keys dissector to parse packets for ARFS

Huy Nguyen <huyn@mellanox.com>
    net/mlx5e: Only support tx/rx pause setting for port owner

Ross Lagerwall <ross.lagerwall@citrix.com>
    xen/netback: Reset nr_frags before freeing skb

Xin Long <lucien.xin@gmail.com>
    sctp: fix the transport error_count check

Eric Dumazet <edumazet@google.com>
    net/packet: fix race in tpacket_snd()

Manish Chopra <manishc@marvell.com>
    bnx2x: Fix VF's VLAN reconfiguration in reload.

Joerg Roedel <jroedel@suse.de>
    iommu/amd: Move iommu_init_pci() to .init section

YueHaibing <yuehaibing@huawei.com>
    Input: psmouse - fix build error of multiple definition

Dirk Morris <dmorris@metaloft.com>
    netfilter: conntrack: Use consistent ct id hash calculation

Will Deacon <will@kernel.org>
    arm64: compat: Allow single-byte watchpoints on all addresses

Daniel Borkmann <daniel@iogearbox.net>
    bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K

Qian Cai <cai@lca.pw>
    asm-generic: fix -Wtype-limits compiler warnings

Tony Lindgren <tony@atomide.com>
    USB: serial: option: Add Motorola modem UARTs

Bob Ham <bob.ham@puri.sm>
    USB: serial: option: add the BroadMobi BM818 card

Yoshiaki Okamoto <yokamoto@allied-telesis.co.jp>
    USB: serial: option: Add support for ZTE MF871A

Rogan Dawes <rogan@dawes.za.net>
    USB: serial: option: add D-Link DWM-222 device ID

Oliver Neukum <oneukum@suse.com>
    USB: CDC: fix sanity checks in CDC union parser

Oliver Neukum <oneukum@suse.com>
    usb: cdc-acm: make sure a refcount is taken early enough

Alan Stern <stern@rowland.harvard.edu>
    USB: core: Fix races in character device registration and deregistraion

Ian Abbott <abbotti@mev.co.uk>
    staging: comedi: dt3000: Fix rounding up of timer divisor

Ian Abbott <abbotti@mev.co.uk>
    staging: comedi: dt3000: Fix signed integer overflow 'divider * base'

YueHaibing <yuehaibing@huawei.com>
    ocfs2: remove set but not used variable 'last_hash'

Jack Morgenstein <jackm@dev.mellanox.co.il>
    IB/mad: Fix use-after-free in ib mad completion handling

Tony Luck <tony.luck@intel.com>
    IB/core: Add mitigation for Spectre V1

Qian Cai <cai@lca.pw>
    arm64/mm: fix variable 'pud' set but not used

Qian Cai <cai@lca.pw>
    arm64/efi: fix variable 'si' set but not used

Masahiro Yamada <yamada.masahiro@socionext.com>
    kbuild: modpost: handle KBUILD_EXTRA_SYMBOLS only for external modules

Miquel Raynal <miquel.raynal@bootlin.com>
    ata: libahci: do not complain in case of deferred probe

Don Brace <don.brace@microsemi.com>
    scsi: hpsa: correct scsi command status issue after reset

Kees Cook <keescook@chromium.org>
    libata: zpodd: Fix small read overflow in zpodd_get_mech_type()

Numfor Mbiziwo-Tiapo <nums@google.com>
    perf header: Fix use of unitialized value warning

Vince Weaver <vincent.weaver@maine.edu>
    perf header: Fix divide by zero error if f_header.attr_size==0

Lucas Stach <l.stach@pengutronix.de>
    irqchip/irq-imx-gpcv2: Forward irq type to parent

YueHaibing <yuehaibing@huawei.com>
    xen/pciback: remove set but not used variable 'old_state'

Denis Kirjanov <kda@linux-powerpc.org>
    net: usb: pegasus: fix improper read if get_registers() fail

Oliver Neukum <oneukum@suse.com>
    Input: iforce - add sanity checks

Oliver Neukum <oneukum@suse.com>
    Input: kbtab - sanity check for endpoint type

Hillf Danton <hdanton@sina.com>
    HID: hiddev: do cleanup in failure of opening a device

Hillf Danton <hdanton@sina.com>
    HID: hiddev: avoid opening a disconnected device

Oliver Neukum <oneukum@suse.com>
    HID: holtek: test for sanity of intfdata

Hui Wang <hui.wang@canonical.com>
    ALSA: hda - Let all conexant codec enter D3 when rebooting

Hui Wang <hui.wang@canonical.com>
    ALSA: hda - Add a generic reboot_notify

Wenwen Wang <wenwen@cs.uga.edu>
    ALSA: hda - Fix a memory leak bug

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: add missing isync to the cpu_reset TLB code

Florian Westphal <fw@strlen.de>
    netfilter: ctnetlink: don't use conntrack/expect object addresses as id

Eric Dumazet <edumazet@google.com>
    inet: switch IP ID generator to siphash

Jason A. Donenfeld <Jason@zx2c4.com>
    siphash: implement HalfSipHash1-3 for hash tables

Jason A. Donenfeld <Jason@zx2c4.com>
    siphash: add cryptographically secure PRF

Jason Wang <jasowang@redhat.com>
    vhost: scsi: add weight support

Jason Wang <jasowang@redhat.com>
    vhost_net: fix possible infinite loop

Jason Wang <jasowang@redhat.com>
    vhost: introduce vhost_exceeds_weight()

Jason Wang <jasowang@redhat.com>
    vhost_net: introduce vhost_exceeds_weight()

Paolo Abeni <pabeni@redhat.com>
    vhost_net: use packet weight for rx handler, too

haibinzhang(张海斌) <haibinzhang@tencent.com>
    vhost-net: set packet weight of tx polling to 2 * vq size

Daniel Borkmann <daniel@iogearbox.net>
    bpf: add bpf_jit_limit knob to restrict unpriv allocations

Daniel Borkmann <daniel@iogearbox.net>
    bpf: restrict access to core bpf sysctls

Daniel Borkmann <daniel@iogearbox.net>
    bpf: get rid of pure_initcall dependency to enable jits

Miles Chen <miles.chen@mediatek.com>
    mm/memcontrol.c: fix use after free in mem_cgroup_iter()

Isaac J. Manjarres <isaacm@codeaurora.org>
    mm/usercopy: use memory range to be accessed for wraparound check

Gustavo A. R. Silva <gustavo@embeddedor.com>
    sh: kernel: hw_breakpoint: Fix missing break in switch statement

Suganath Prabu <suganath-prabu.subramani@broadcom.com>
    scsi: mpt3sas: Use 63-bit DMA addressing on SAS35 HBA

Emmanuel Grumbach <emmanuel.grumbach@intel.com>
    iwlwifi: don't unmap as page memory that was mapped as single

Brian Norris <briannorris@chromium.org>
    mwifiex: fix 802.11n/WPA detection

Steve French <stfrench@microsoft.com>
    smb3: send CAP_DFS capability during session setup

Pavel Shilovsky <pshilov@microsoft.com>
    SMB3: Fix deadlock in validate negotiate hits reconnect

Brian Norris <briannorris@chromium.org>
    mac80211: don't WARN on short WMM parameters from AP

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Don't override global PCM hw info flag

Wenwen Wang <wenwen@cs.uga.edu>
    ALSA: firewire: fix a memory leak bug

Guenter Roeck <linux@roeck-us.net>
    hwmon: (nct7802) Fix wrong detection of in4 presence

Tomas Bortoli <tomasbortoli@gmail.com>
    can: peak_usb: pcan_usb_fd: Fix info-leaks to USB devices

Tomas Bortoli <tomasbortoli@gmail.com>
    can: peak_usb: pcan_usb_pro: Fix info-leaks to USB devices

Leonard Crestez <leonard.crestez@nxp.com>
    perf/core: Fix creating kernel counters for PMUs that override event->cpu

Peter Zijlstra <peterz@infradead.org>
    tty/ldsem, locking/rwsem: Add missing ACQUIRE to read_failed sleep loop

Hannes Reinecke <hare@suse.de>
    scsi: scsi_dh_alua: always use a 2 second delay before retrying RTPG

Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
    scsi: ibmvfc: fix WARN_ON during event pool release

Junxiao Bi <junxiao.bi@oracle.com>
    scsi: megaraid_sas: fix panic on loading firmware crashdump

Arnd Bergmann <arnd@arndb.de>
    ARM: davinci: fix sleep.S build error on ARMv4

Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
    ACPI/IORT: Fix off-by-one check in iort_dev_find_its_id()

Arnd Bergmann <arnd@arndb.de>
    drbd: dynamically allocate shash descriptor

Arnaldo Carvalho de Melo <acme@redhat.com>
    perf probe: Avoid calling freeing routine multiple times for same pointer

Charles Keepax <ckeepax@opensource.cirrus.com>
    ALSA: compress: Be more restrictive about when a drain is allowed

Charles Keepax <ckeepax@opensource.cirrus.com>
    ALSA: compress: Don't allow paritial drain operations on capture streams

Charles Keepax <ckeepax@opensource.cirrus.com>
    ALSA: compress: Prevent bypasses of set_params

Charles Keepax <ckeepax@opensource.cirrus.com>
    ALSA: compress: Fix regression on compressed capture streams

Julian Wiedmann <jwi@linux.ibm.com>
    s390/qdio: add sanity checks to the fast-requeue path

Wen Yang <wen.yang99@zte.com.cn>
    cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init()

Björn Gerhart <gerhart@posteo.de>
    hwmon: (nct6775) Fix register address and added missed tolerance for nct6106

Brian Norris <briannorris@chromium.org>
    mac80211: don't warn about CW params when not using them

Thomas Tai <thomas.tai@oracle.com>
    iscsi_ibft: make ISCSI_IBFT dependson ACPI instead of ISCSI_IBFT_FIND

Florian Westphal <fw@strlen.de>
    netfilter: nfnetlink: avoid deadlock due to synchronous request_module

Stephane Grosjean <s.grosjean@peak-system.com>
    can: peak_usb: fix potential double kfree_skb()

Suzuki K Poulose <suzuki.poulose@arm.com>
    usb: yurex: Fix use-after-free in yurex_delete

Thomas Richter <tmricht@linux.ibm.com>
    perf record: Fix module size on s390

Adrian Hunter <adrian.hunter@intel.com>
    perf db-export: Fix thread__exec_comm()

Thomas Richter <tmricht@linux.vnet.ibm.com>
    perf record: Fix wrong size in perf_record_mmap for last kernel module

Joerg Roedel <jroedel@suse.de>
    mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()

Joerg Roedel <jroedel@suse.de>
    x86/mm: Sync also unmappings in vmalloc_sync_all()

Joerg Roedel <jroedel@suse.de>
    x86/mm: Check for pfn instead of page in vmalloc_sync_one()

Wenwen Wang <wenwen@cs.uga.edu>
    sound: fix a memory leak bug

Oliver Neukum <oneukum@suse.com>
    usb: iowarrior: fix deadlock on disconnect

Gavin Li <git@thegavinli.com>
    usb: usbfs: fix double-free of usb memory upon submiturb error


-------------

Diffstat:

 Documentation/siphash.txt                          | 175 +++++++
 Documentation/sysctl/net.txt                       |   8 +
 MAINTAINERS                                        |   7 +
 Makefile                                           |   4 +-
 arch/arm/mach-davinci/sleep.S                      |   1 +
 arch/arm/net/bpf_jit_32.c                          |   2 -
 arch/arm64/include/asm/efi.h                       |   6 +-
 arch/arm64/include/asm/pgtable.h                   |   4 +-
 arch/arm64/kernel/hw_breakpoint.c                  |   7 +-
 arch/arm64/net/bpf_jit_comp.c                      |   2 -
 arch/mips/net/bpf_jit.c                            |   2 -
 arch/powerpc/net/bpf_jit_comp.c                    |   2 -
 arch/powerpc/net/bpf_jit_comp64.c                  |   2 -
 arch/s390/net/bpf_jit_comp.c                       |   2 -
 arch/sh/kernel/hw_breakpoint.c                     |   1 +
 arch/sparc/net/bpf_jit_comp.c                      |   2 -
 arch/x86/mm/fault.c                                |  15 +-
 arch/x86/net/bpf_jit_comp.c                        |   2 -
 arch/xtensa/kernel/setup.c                         |   1 +
 drivers/acpi/arm64/iort.c                          |   4 +-
 drivers/ata/libahci_platform.c                     |   3 +
 drivers/ata/libata-zpodd.c                         |   2 +-
 drivers/block/drbd/drbd_receiver.c                 |  14 +-
 drivers/cpufreq/pasemi-cpufreq.c                   |  23 +-
 drivers/firmware/Kconfig                           |   5 +-
 drivers/firmware/iscsi_ibft.c                      |   4 +
 drivers/hid/hid-holtek-kbd.c                       |   9 +-
 drivers/hid/usbhid/hiddev.c                        |  12 +
 drivers/hwmon/nct6775.c                            |   3 +-
 drivers/hwmon/nct7802.c                            |   6 +-
 drivers/infiniband/core/mad.c                      |  20 +-
 drivers/infiniband/core/user_mad.c                 |   6 +-
 drivers/input/joystick/iforce/iforce-usb.c         |   5 +
 drivers/input/mouse/trackpoint.h                   |   3 +-
 drivers/input/tablet/kbtab.c                       |   6 +-
 drivers/iommu/amd_iommu_init.c                     |   2 +-
 drivers/irqchip/irq-imx-gpcv2.c                    |   1 +
 drivers/net/bonding/bond_main.c                    |   4 +-
 drivers/net/can/usb/peak_usb/pcan_usb_core.c       |   8 +-
 drivers/net/can/usb/peak_usb/pcan_usb_fd.c         |   2 +-
 drivers/net/can/usb/peak_usb/pcan_usb_pro.c        |   2 +-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c    |   7 +-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h    |   2 +
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c   |  17 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c  |  97 ++--
 .../net/ethernet/mellanox/mlx5/core/en_ethtool.c   |   3 +
 drivers/net/team/team.c                            |   4 +-
 drivers/net/usb/pegasus.c                          |   2 +-
 drivers/net/wireless/intel/iwlwifi/pcie/tx.c       |   2 +
 drivers/net/wireless/marvell/mwifiex/main.h        |   1 +
 drivers/net/wireless/marvell/mwifiex/scan.c        |   3 +-
 drivers/net/xen-netback/netback.c                  |   2 +
 drivers/s390/cio/qdio_main.c                       |  12 +-
 drivers/scsi/device_handler/scsi_dh_alua.c         |   7 +-
 drivers/scsi/hpsa.c                                |  12 +-
 drivers/scsi/ibmvscsi/ibmvfc.c                     |   2 +-
 drivers/scsi/megaraid/megaraid_sas_base.c          |   3 +
 drivers/scsi/mpt3sas/mpt3sas_base.c                |  12 +-
 drivers/staging/comedi/drivers/dt3000.c            |   8 +-
 drivers/tty/tty_ldsem.c                            |   5 +-
 drivers/usb/class/cdc-acm.c                        |  12 +-
 drivers/usb/core/devio.c                           |   2 -
 drivers/usb/core/file.c                            |  10 +-
 drivers/usb/core/message.c                         |   4 +-
 drivers/usb/misc/iowarrior.c                       |   7 +-
 drivers/usb/misc/yurex.c                           |   2 +-
 drivers/usb/serial/option.c                        |  10 +
 drivers/vhost/net.c                                |  34 +-
 drivers/vhost/scsi.c                               |  15 +-
 drivers/vhost/vhost.c                              |  20 +-
 drivers/vhost/vhost.h                              |   6 +-
 drivers/vhost/vsock.c                              |  12 +-
 drivers/xen/xen-pciback/conf_space_capability.c    |   3 +-
 fs/cifs/smb2pdu.c                                  |   7 +-
 fs/ocfs2/xattr.c                                   |   3 -
 include/asm-generic/getorder.h                     |  50 +-
 include/linux/filter.h                             |   1 +
 include/linux/siphash.h                            | 145 ++++++
 include/net/netfilter/nf_conntrack.h               |   2 +
 include/net/netns/ipv4.h                           |   2 +
 include/sound/compress_driver.h                    |   5 +-
 kernel/bpf/core.c                                  |  73 ++-
 kernel/events/core.c                               |   2 +-
 lib/Kconfig.debug                                  |   6 +-
 lib/Makefile                                       |   5 +-
 lib/siphash.c                                      | 551 +++++++++++++++++++++
 lib/test_siphash.c                                 | 223 +++++++++
 mm/memcontrol.c                                    |  39 +-
 mm/usercopy.c                                      |   2 +-
 mm/vmalloc.c                                       |   9 +
 net/core/sysctl_net_core.c                         |  71 ++-
 net/ipv4/route.c                                   |  12 +-
 net/ipv6/output_core.c                             |  30 +-
 net/mac80211/driver-ops.c                          |  13 +-
 net/mac80211/mlme.c                                |  10 +
 net/netfilter/nf_conntrack_core.c                  |  35 ++
 net/netfilter/nf_conntrack_netlink.c               |  34 +-
 net/netfilter/nfnetlink.c                          |   2 +-
 net/packet/af_packet.c                             |   7 +
 net/sctp/sm_sideeffect.c                           |   2 +-
 net/socket.c                                       |   9 -
 scripts/Makefile.modpost                           |   2 +-
 sound/core/compress_offload.c                      |  60 ++-
 sound/firewire/packets-buffer.c                    |   2 +-
 sound/pci/hda/hda_controller.c                     |   6 +-
 sound/pci/hda/hda_generic.c                        |  21 +-
 sound/pci/hda/hda_generic.h                        |   1 +
 sound/pci/hda/patch_conexant.c                     |  15 +-
 sound/pci/hda/patch_realtek.c                      |  11 +-
 sound/sound_core.c                                 |   3 +-
 tools/perf/arch/s390/util/machine.c                |  14 +-
 tools/perf/builtin-probe.c                         |  10 +
 tools/perf/util/header.c                           |   9 +-
 tools/perf/util/machine.c                          |   7 +-
 tools/perf/util/machine.h                          |   2 +-
 tools/perf/util/symbol-elf.c                       |   2 +-
 tools/perf/util/symbol.c                           |  21 +-
 tools/perf/util/symbol.h                           |   2 +-
 tools/perf/util/thread.c                           |  12 +-
 119 files changed, 1894 insertions(+), 383 deletions(-)

[PATCH 4.9 001/103] usb: usbfs: fix double-free of usb memory upon submiturb error

[Greg Kroah-Hartman]

From: Gavin Li <git@thegavinli.com>

commit c43f28dfdc4654e738aa6d3fd08a105b2bee758d upstream.

Upon an error within proc_do_submiturb(), dec_usb_memory_use_count()
gets called once by the error handling tail and again by free_async().
Remove the first call.

Signed-off-by: Gavin Li <git@thegavinli.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190804235044.22327-1-gavinli@thegavinli.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/devio.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1810,8 +1810,6 @@ static int proc_do_submiturb(struct usb_
 	return 0;
 
  error:
-	if (as && as->usbm)
-		dec_usb_memory_use_count(as->usbm, &as->usbm->urb_use_count);
 	kfree(isopkt);
 	kfree(dr);
 	if (as)

[PATCH 4.9 002/103] usb: iowarrior: fix deadlock on disconnect

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit c468a8aa790e0dfe0a7f8a39db282d39c2c00b46 upstream.

We have to drop the mutex before we close() upon disconnect()
as close() needs the lock. This is safe to do by dropping the
mutex as intfdata is already set to NULL, so open() will fail.

Fixes: 03f36e885fc26 ("USB: open disconnect race in iowarrior")
Reported-by: syzbot+a64a382964bf6c71a9c0@syzkaller.appspotmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20190808092728.23417-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/misc/iowarrior.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -886,19 +886,20 @@ static void iowarrior_disconnect(struct
 	dev = usb_get_intfdata(interface);
 	mutex_lock(&iowarrior_open_disc_lock);
 	usb_set_intfdata(interface, NULL);
+	/* prevent device read, write and ioctl */
+	dev->present = 0;
 
 	minor = dev->minor;
+	mutex_unlock(&iowarrior_open_disc_lock);
+	/* give back our minor - this will call close() locks need to be dropped at this point*/
 
-	/* give back our minor */
 	usb_deregister_dev(interface, &iowarrior_class);
 
 	mutex_lock(&dev->mutex);
 
 	/* prevent device read, write and ioctl */
-	dev->present = 0;
 
 	mutex_unlock(&dev->mutex);
-	mutex_unlock(&iowarrior_open_disc_lock);
 
 	if (dev->opened) {
 		/* There is a process that holds a filedescriptor to the device ,

[PATCH 4.9 003/103] sound: fix a memory leak bug

[Greg Kroah-Hartman]

From: Wenwen Wang <wenwen@cs.uga.edu>

commit c7cd7c748a3250ca33509f9235efab9c803aca09 upstream.

In sound_insert_unit(), the controlling structure 's' is allocated through
kmalloc(). Then it is added to the sound driver list by invoking
__sound_insert_unit(). Later on, if __register_chrdev() fails, 's' is
removed from the list through __sound_remove_unit(). If 'index' is not less
than 0, -EBUSY is returned to indicate the error. However, 's' is not
deallocated on this execution path, leading to a memory leak bug.

To fix the above issue, free 's' before -EBUSY is returned.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/sound_core.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -287,7 +287,8 @@ retry:
 				goto retry;
 			}
 			spin_unlock(&sound_loader_lock);
-			return -EBUSY;
+			r = -EBUSY;
+			goto fail;
 		}
 	}
 

[PATCH 4.9 004/103] x86/mm: Check for pfn instead of page in vmalloc_sync_one()

[Greg Kroah-Hartman]

From: Joerg Roedel <jroedel@suse.de>

commit 51b75b5b563a2637f9d8dc5bd02a31b2ff9e5ea0 upstream.

Do not require a struct page for the mapped memory location because it
might not exist. This can happen when an ioremapped region is mapped with
2MB pages.

Fixes: 5d72b4fba40ef ('x86, mm: support huge I/O mapping capability I/F')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20190719184652.11391-2-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/mm/fault.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -279,7 +279,7 @@ static inline pmd_t *vmalloc_sync_one(pg
 	if (!pmd_present(*pmd))
 		set_pmd(pmd, *pmd_k);
 	else
-		BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
+		BUG_ON(pmd_pfn(*pmd) != pmd_pfn(*pmd_k));
 
 	return pmd_k;
 }

[PATCH 4.9 005/103] x86/mm: Sync also unmappings in vmalloc_sync_all()

[Greg Kroah-Hartman]

From: Joerg Roedel <jroedel@suse.de>

commit 8e998fc24de47c55b47a887f6c95ab91acd4a720 upstream.

With huge-page ioremap areas the unmappings also need to be synced between
all page-tables. Otherwise it can cause data corruption when a region is
unmapped and later re-used.

Make the vmalloc_sync_one() function ready to sync unmappings and make sure
vmalloc_sync_all() iterates over all page-tables even when an unmapped PMD
is found.

Fixes: 5d72b4fba40ef ('x86, mm: support huge I/O mapping capability I/F')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20190719184652.11391-3-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/mm/fault.c |   13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -273,11 +273,12 @@ static inline pmd_t *vmalloc_sync_one(pg
 
 	pmd = pmd_offset(pud, address);
 	pmd_k = pmd_offset(pud_k, address);
-	if (!pmd_present(*pmd_k))
-		return NULL;
 
-	if (!pmd_present(*pmd))
+	if (pmd_present(*pmd) != pmd_present(*pmd_k))
 		set_pmd(pmd, *pmd_k);
+
+	if (!pmd_present(*pmd_k))
+		return NULL;
 	else
 		BUG_ON(pmd_pfn(*pmd) != pmd_pfn(*pmd_k));
 
@@ -299,17 +300,13 @@ void vmalloc_sync_all(void)
 		spin_lock(&pgd_lock);
 		list_for_each_entry(page, &pgd_list, lru) {
 			spinlock_t *pgt_lock;
-			pmd_t *ret;
 
 			/* the pgt_lock only for Xen */
 			pgt_lock = &pgd_page_get_mm(page)->page_table_lock;
 
 			spin_lock(pgt_lock);
-			ret = vmalloc_sync_one(page_address(page), address);
+			vmalloc_sync_one(page_address(page), address);
 			spin_unlock(pgt_lock);
-
-			if (!ret)
-				break;
 		}
 		spin_unlock(&pgd_lock);
 	}

[PATCH 4.9 006/103] mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()

[Greg Kroah-Hartman]

From: Joerg Roedel <jroedel@suse.de>

commit 3f8fd02b1bf1d7ba964485a56f2f4b53ae88c167 upstream.

On x86-32 with PTI enabled, parts of the kernel page-tables are not shared
between processes. This can cause mappings in the vmalloc/ioremap area to
persist in some page-tables after the region is unmapped and released.

When the region is re-used the processes with the old mappings do not fault
in the new mappings but still access the old ones.

This causes undefined behavior, in reality often data corruption, kernel
oopses and panics and even spontaneous reboots.

Fix this problem by activly syncing unmaps in the vmalloc/ioremap area to
all page-tables in the system before the regions can be re-used.

Fixes: 5d72b4fba40ef ('x86, mm: support huge I/O mapping capability I/F')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20190719184652.11391-4-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/vmalloc.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1708,6 +1708,12 @@ void *__vmalloc_node_range(unsigned long
 		return NULL;
 
 	/*
+	 * First make sure the mappings are removed from all page-tables
+	 * before they are freed.
+	 */
+	vmalloc_sync_all();
+
+	/*
 	 * In this function, newly allocated vm_struct has VM_UNINITIALIZED
 	 * flag. It means that vm_struct is not fully initialized.
 	 * Now, it is fully initialized, so remove this flag here.
@@ -2243,6 +2249,9 @@ EXPORT_SYMBOL(remap_vmalloc_range);
 /*
  * Implement a stub for vmalloc_sync_all() if the architecture chose not to
  * have one.
+ *
+ * The purpose of this function is to make sure the vmalloc area
+ * mappings are identical in all page-tables in the system.
  */
 void __weak vmalloc_sync_all(void)
 {

[PATCH 4.9 007/103] perf record: Fix wrong size in perf_record_mmap for last kernel module

[Greg Kroah-Hartman]

From: Thomas Richter <tmricht@linux.vnet.ibm.com>

commit 9ad4652b66f19a60f07e63b942b80b5c2d7465bf upstream.

During work on perf report for s390 I ran into the following issue:

0 0x318 [0x78]: PERF_RECORD_MMAP -1/0:
        [0x3ff804d6990(0xfffffc007fb2966f) @ 0]:
        x /lib/modules/4.12.0perf1+/kernel/drivers/s390/net/qeth_l2.ko

This is a PERF_RECORD_MMAP entry of the perf.data file with an invalid
module size for qeth_l2.ko (the s390 ethernet device driver).

Even a mainframe does not have 0xfffffc007fb2966f bytes of main memory.

It turned out that this wrong size is created by the perf record
command.  What happens is this function call sequence from
__cmd_record():

  perf_session__new():
    perf_session__create_kernel_maps():
      machine__create_kernel_maps():
        machine__create_modules():   Creates map for all loaded kernel modules.
          modules__parse():   Reads /proc/modules and extracts module name and
                              load address (1st and last column)
            machine__create_module():   Called for every module found in /proc/modules.
                              Creates a new map for every module found and enters
                              module name and start address into the map. Since the
                              module end address is unknown it is set to zero.

This ends up with a kernel module map list sorted by module start
addresses.  All module end addresses are zero.

Last machine__create_kernel_maps() calls function map_groups__fixup_end().
This function iterates through the maps and assigns each map entry's
end address the successor map entry start address. The last entry of the
map group has no successor, so ~0 is used as end to consume the remaining
memory.

Later __cmd_record calls function record__synthesize() which in turn calls
perf_event__synthesize_kernel_mmap() and perf_event__synthesize_modules()
to create PERF_REPORT_MMAP entries into the perf.data file.

On s390 this results in the last module qeth_l2.ko
(which has highest start address, see module table:
        [root@s8360047 perf]# cat /proc/modules
        qeth_l2 86016 1 - Live 0x000003ff804d6000
        qeth 266240 1 qeth_l2, Live 0x000003ff80296000
        ccwgroup 24576 1 qeth, Live 0x000003ff80218000
        vmur 36864 0 - Live 0x000003ff80182000
        qdio 143360 2 qeth_l2,qeth, Live 0x000003ff80002000
        [root@s8360047 perf]# )
to be the last entry and its map has an end address of ~0.

When the PERF_RECORD_MMAP entry is created for kernel module qeth_l2.ko
its start address and length is written. The length is calculated in line:
    event->mmap.len   = pos->end - pos->start;
and results in 0xffffffffffffffff - 0x3ff804d6990(*) = 0xfffffc007fb2966f

(*) On s390 the module start address is actually determined by a __weak function
named arch__fix_module_text_start() in machine__create_module().

I think this improvable. We can use the module size (2nd column of /proc/modules)
to get each loaded kernel module size and calculate its end address.
Only for map entries which do not have a valid end address (end is still zero)
we can use the heuristic we have now, that is use successor start address or ~0.

Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com>
LPU-Reference: 20170803134902.47207-2-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-nmoqij5b5vxx7rq2ckwu8iaj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Daz <daniel.diaz@linaro.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/util/machine.c    |    4 +++-
 tools/perf/util/symbol-elf.c |    2 +-
 tools/perf/util/symbol.c     |   21 ++++++++++++++-------
 tools/perf/util/symbol.h     |    2 +-
 4 files changed, 19 insertions(+), 10 deletions(-)

--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -1079,7 +1079,8 @@ int __weak arch__fix_module_text_start(u
 	return 0;
 }
 
-static int machine__create_module(void *arg, const char *name, u64 start)
+static int machine__create_module(void *arg, const char *name, u64 start,
+				  u64 size)
 {
 	struct machine *machine = arg;
 	struct map *map;
@@ -1090,6 +1091,7 @@ static int machine__create_module(void *
 	map = machine__findnew_module_map(machine, start, name);
 	if (map == NULL)
 		return -1;
+	map->end = start + size;
 
 	dso__kernel_module_get_build_id(map->dso, machine->root_dir);
 
--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -1478,7 +1478,7 @@ static int kcore_copy__parse_kallsyms(st
 
 static int kcore_copy__process_modules(void *arg,
 				       const char *name __maybe_unused,
-				       u64 start)
+				       u64 start, u64 size __maybe_unused)
 {
 	struct kcore_copy_info *kci = arg;
 
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -217,7 +217,8 @@ void __map_groups__fixup_end(struct map_
 		goto out_unlock;
 
 	for (next = map__next(curr); next; next = map__next(curr)) {
-		curr->end = next->start;
+		if (!curr->end)
+			curr->end = next->start;
 		curr = next;
 	}
 
@@ -225,7 +226,8 @@ void __map_groups__fixup_end(struct map_
 	 * We still haven't the actual symbols, so guess the
 	 * last map final address.
 	 */
-	curr->end = ~0ULL;
+	if (!curr->end)
+		curr->end = ~0ULL;
 
 out_unlock:
 	pthread_rwlock_unlock(&maps->lock);
@@ -512,7 +514,7 @@ void dso__sort_by_name(struct dso *dso,
 
 int modules__parse(const char *filename, void *arg,
 		   int (*process_module)(void *arg, const char *name,
-					 u64 start))
+					 u64 start, u64 size))
 {
 	char *line = NULL;
 	size_t n;
@@ -525,8 +527,8 @@ int modules__parse(const char *filename,
 
 	while (1) {
 		char name[PATH_MAX];
-		u64 start;
-		char *sep;
+		u64 start, size;
+		char *sep, *endptr;
 		ssize_t line_len;
 
 		line_len = getline(&line, &n, file);
@@ -558,7 +560,11 @@ int modules__parse(const char *filename,
 
 		scnprintf(name, sizeof(name), "[%s]", line);
 
-		err = process_module(arg, name, start);
+		size = strtoul(sep + 1, &endptr, 0);
+		if (*endptr != ' ' && *endptr != '\t')
+			continue;
+
+		err = process_module(arg, name, start, size);
 		if (err)
 			break;
 	}
@@ -905,7 +911,8 @@ static struct module_info *find_module(c
 	return NULL;
 }
 
-static int __read_proc_modules(void *arg, const char *name, u64 start)
+static int __read_proc_modules(void *arg, const char *name, u64 start,
+			       u64 size __maybe_unused)
 {
 	struct rb_root *modules = arg;
 	struct module_info *mi;
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -268,7 +268,7 @@ int filename__read_build_id(const char *
 int sysfs__read_build_id(const char *filename, void *bf, size_t size);
 int modules__parse(const char *filename, void *arg,
 		   int (*process_module)(void *arg, const char *name,
-					 u64 start));
+					 u64 start, u64 size));
 int filename__read_debuglink(const char *filename, char *debuglink,
 			     size_t size);
 

[PATCH 4.9 008/103] perf db-export: Fix thread__exec_comm()

[Greg Kroah-Hartman]

From: Adrian Hunter <adrian.hunter@intel.com>

commit 3de7ae0b2a1d86dbb23d0cb135150534fdb2e836 upstream.

Threads synthesized from /proc have comms with a start time of zero, and
not marked as "exec". Currently, there can be 2 such comms. The first is
created by processing a synthesized fork event and is set to the
parent's comm string, and the second by processing a synthesized comm
event set to the thread's current comm string.

In the absence of an "exec" comm, thread__exec_comm() picks the last
(oldest) comm, which, in the case above, is the parent's comm string.
For a main thread, that is very probably wrong. Use the second-to-last
in that case.

This affects only db-export because it is the only user of
thread__exec_comm().

Example:

  $ sudo perf record -a -o pt-a-sleep-1 -e intel_pt//u -- sleep 1
  $ sudo chown ahunter pt-a-sleep-1

Before:

  $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1.db branches calls
  $ sqlite3 -header -column pt-a-sleep-1.db 'select * from comm_threads_view'
  comm_id     command     thread_id   pid         tid
  ----------  ----------  ----------  ----------  ----------
  1           swapper     1           0           0
  2           rcu_sched   2           10          10
  3           kthreadd    3           78          78
  5           sudo        4           15180       15180
  5           sudo        5           15180       15182
  7           kworker/4:  6           10335       10335
  8           kthreadd    7           55          55
  10          systemd     8           865         865
  10          systemd     9           865         875
  13          perf        10          15181       15181
  15          sleep       10          15181       15181
  16          kworker/3:  11          14179       14179
  17          kthreadd    12          29376       29376
  19          systemd     13          746         746
  21          systemd     14          401         401
  23          systemd     15          879         879
  23          systemd     16          879         945
  25          kthreadd    17          556         556
  27          kworker/u1  18          14136       14136
  28          kworker/u1  19          15021       15021
  29          kthreadd    20          509         509
  31          systemd     21          836         836
  31          systemd     22          836         967
  33          systemd     23          1148        1148
  33          systemd     24          1148        1163
  35          kworker/2:  25          17988       17988
  36          kworker/0:  26          13478       13478

After:

  $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1b.db branches calls
  $ sqlite3 -header -column pt-a-sleep-1b.db 'select * from comm_threads_view'
  comm_id     command     thread_id   pid         tid
  ----------  ----------  ----------  ----------  ----------
  1           swapper     1           0           0
  2           rcu_sched   2           10          10
  3           kswapd0     3           78          78
  4           perf        4           15180       15180
  4           perf        5           15180       15182
  6           kworker/4:  6           10335       10335
  7           kcompactd0  7           55          55
  8           accounts-d  8           865         865
  8           accounts-d  9           865         875
  10          perf        10          15181       15181
  12          sleep       10          15181       15181
  13          kworker/3:  11          14179       14179
  14          kworker/1:  12          29376       29376
  15          haveged     13          746         746
  16          systemd-jo  14          401         401
  17          NetworkMan  15          879         879
  17          NetworkMan  16          879         945
  19          irq/131-iw  17          556         556
  20          kworker/u1  18          14136       14136
  21          kworker/u1  19          15021       15021
  22          kworker/u1  20          509         509
  23          thermald    21          836         836
  23          thermald    22          836         967
  25          unity-sett  23          1148        1148
  25          unity-sett  24          1148        1163
  27          kworker/2:  25          17988       17988
  28          kworker/0:  26          13478       13478

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 65de51f93ebf ("perf tools: Identify which comms are from exec")
Link: http://lkml.kernel.org/r/20190808064823.14846-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/util/thread.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/tools/perf/util/thread.c
+++ b/tools/perf/util/thread.c
@@ -114,14 +114,24 @@ struct comm *thread__comm(const struct t
 
 struct comm *thread__exec_comm(const struct thread *thread)
 {
-	struct comm *comm, *last = NULL;
+	struct comm *comm, *last = NULL, *second_last = NULL;
 
 	list_for_each_entry(comm, &thread->comm_list, list) {
 		if (comm->exec)
 			return comm;
+		second_last = last;
 		last = comm;
 	}
 
+	/*
+	 * 'last' with no start time might be the parent's comm of a synthesized
+	 * thread (created by processing a synthesized fork event). For a main
+	 * thread, that is very probably wrong. Prefer a later comm to avoid
+	 * that case.
+	 */
+	if (second_last && !last->start && thread->pid_ == thread->tid)
+		return second_last;
+
 	return last;
 }
 

[PATCH 4.9 009/103] perf record: Fix module size on s390

[Greg Kroah-Hartman]

From: Thomas Richter <tmricht@linux.ibm.com>

commit 12a6d2940b5f02b4b9f71ce098e3bb02bc24a9ea upstream.

On s390 the modules loaded in memory have the text segment located after
the GOT and Relocation table. This can be seen with this output:

  [root@m35lp76 perf]# fgrep qeth /proc/modules
  qeth 151552 1 qeth_l2, Live 0x000003ff800b2000
  ...
  [root@m35lp76 perf]# cat /sys/module/qeth/sections/.text
  0x000003ff800b3990
  [root@m35lp76 perf]#

There is an offset of 0x1990 bytes. The size of the qeth module is
151552 bytes (0x25000 in hex).

The location of the GOT/relocation table at the beginning of a module is
unique to s390.

commit 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map")
adjusts the start address of a module in the map structures, but does
not adjust the size of the modules. This leads to overlapping of module
maps as this example shows:

[root@m35lp76 perf] # ./perf report -D
     0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x25000)
          @ 0]:  x /lib/modules/.../qeth.ko.xz
     0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x8000)
          @ 0]:  x /lib/modules/.../ip6_tables.ko.xz

The module qeth.ko has an adjusted start address modified to b3990, but
its size is unchanged and the module ends at 0x3ff800d8990.  This end
address overlaps with the next modules start address of 0x3ff800d85a0.

When the size of the leading GOT/Relocation table stored in the
beginning of the text segment (0x1990 bytes) is subtracted from module
qeth end address, there are no overlaps anymore:

   0x3ff800d8990 - 0x1990 = 0x0x3ff800d7000

which is the same as

   0x3ff800b2000 + 0x25000 = 0x0x3ff800d7000.

To fix this issue, also adjust the modules size in function
arch__fix_module_text_start(). Add another function parameter named size
and reduce the size of the module when the text segment start address is
changed.

Output after:
     0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x23670)
          @ 0]:  x /lib/modules/.../qeth.ko.xz
     0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x7a60)
          @ 0]:  x /lib/modules/.../ip6_tables.ko.xz

Reported-by: Stefan Liebler <stli@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map")
Link: http://lkml.kernel.org/r/20190724122703.3996-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/arch/s390/util/machine.c |   14 +++++++++++++-
 tools/perf/util/machine.c           |    3 ++-
 tools/perf/util/machine.h           |    2 +-
 3 files changed, 16 insertions(+), 3 deletions(-)

--- a/tools/perf/arch/s390/util/machine.c
+++ b/tools/perf/arch/s390/util/machine.c
@@ -6,7 +6,7 @@
 #include "api/fs/fs.h"
 #include "debug.h"
 
-int arch__fix_module_text_start(u64 *start, const char *name)
+int arch__fix_module_text_start(u64 *start, u64 *size, const char *name)
 {
 	u64 m_start = *start;
 	char path[PATH_MAX];
@@ -16,6 +16,18 @@ int arch__fix_module_text_start(u64 *sta
 	if (sysfs__read_ull(path, (unsigned long long *)start) < 0) {
 		pr_debug2("Using module %s start:%#lx\n", path, m_start);
 		*start = m_start;
+	} else {
+		/* Successful read of the modules segment text start address.
+		 * Calculate difference between module start address
+		 * in memory and module text segment start address.
+		 * For example module load address is 0x3ff8011b000
+		 * (from /proc/modules) and module text segment start
+		 * address is 0x3ff8011b870 (from file above).
+		 *
+		 * Adjust the module size and subtract the GOT table
+		 * size located at the beginning of the module.
+		 */
+		*size -= (*start - m_start);
 	}
 
 	return 0;
--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -1074,6 +1074,7 @@ static int machine__set_modules_path(str
 	return map_groups__set_modules_path_dir(&machine->kmaps, modules_path, 0);
 }
 int __weak arch__fix_module_text_start(u64 *start __maybe_unused,
+				u64 *size __maybe_unused,
 				const char *name __maybe_unused)
 {
 	return 0;
@@ -1085,7 +1086,7 @@ static int machine__create_module(void *
 	struct machine *machine = arg;
 	struct map *map;
 
-	if (arch__fix_module_text_start(&start, name) < 0)
+	if (arch__fix_module_text_start(&start, &size, name) < 0)
 		return -1;
 
 	map = machine__findnew_module_map(machine, start, name);
--- a/tools/perf/util/machine.h
+++ b/tools/perf/util/machine.h
@@ -205,7 +205,7 @@ struct symbol *machine__find_kernel_func
 
 struct map *machine__findnew_module_map(struct machine *machine, u64 start,
 					const char *filename);
-int arch__fix_module_text_start(u64 *start, const char *name);
+int arch__fix_module_text_start(u64 *start, u64 *size, const char *name);
 
 int __machine__load_kallsyms(struct machine *machine, const char *filename,
 			     enum map_type type, bool no_kcore);

[PATCH 4.9 010/103] usb: yurex: Fix use-after-free in yurex_delete

[Greg Kroah-Hartman]

From: Suzuki K Poulose <suzuki.poulose@arm.com>

commit fc05481b2fcabaaeccf63e32ac1baab54e5b6963 upstream.

syzbot reported the following crash [0]:

BUG: KASAN: use-after-free in usb_free_coherent+0x79/0x80
drivers/usb/core/usb.c:928
Read of size 8 at addr ffff8881b18599c8 by task syz-executor.4/16007

CPU: 0 PID: 16007 Comm: syz-executor.4 Not tainted 5.3.0-rc2+ #23
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0xca/0x13e lib/dump_stack.c:113
  print_address_description+0x6a/0x32c mm/kasan/report.c:351
  __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482
  kasan_report+0xe/0x12 mm/kasan/common.c:612
  usb_free_coherent+0x79/0x80 drivers/usb/core/usb.c:928
  yurex_delete+0x138/0x330 drivers/usb/misc/yurex.c:100
  kref_put include/linux/kref.h:65 [inline]
  yurex_release+0x66/0x90 drivers/usb/misc/yurex.c:392
  __fput+0x2d7/0x840 fs/file_table.c:280
  task_work_run+0x13f/0x1c0 kernel/task_work.c:113
  tracehook_notify_resume include/linux/tracehook.h:188 [inline]
  exit_to_usermode_loop+0x1d2/0x200 arch/x86/entry/common.c:163
  prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
  syscall_return_slowpath arch/x86/entry/common.c:274 [inline]
  do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x413511
Code: 75 14 b8 03 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 04 1b 00 00 c3 48
83 ec 08 e8 0a fc ff ff 48 89 04 24 b8 03 00 00 00 0f 05 <48> 8b 3c 24 48
89 c2 e8 53 fc ff ff 48 89 d0 48 83 c4 08 48 3d 01
RSP: 002b:00007ffc424ea2e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000007 RCX: 0000000000413511
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000006
RBP: 0000000000000001 R08: 0000000029a2fc22 R09: 0000000029a2fc26
R10: 00007ffc424ea3c0 R11: 0000000000000293 R12: 000000000075c9a0
R13: 000000000075c9a0 R14: 0000000000761938 R15: ffffffffffffffff

Allocated by task 2776:
  save_stack+0x1b/0x80 mm/kasan/common.c:69
  set_track mm/kasan/common.c:77 [inline]
  __kasan_kmalloc mm/kasan/common.c:487 [inline]
  __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:460
  kmalloc include/linux/slab.h:552 [inline]
  kzalloc include/linux/slab.h:748 [inline]
  usb_alloc_dev+0x51/0xf95 drivers/usb/core/usb.c:583
  hub_port_connect drivers/usb/core/hub.c:5004 [inline]
  hub_port_connect_change drivers/usb/core/hub.c:5213 [inline]
  port_event drivers/usb/core/hub.c:5359 [inline]
  hub_event+0x15c0/0x3640 drivers/usb/core/hub.c:5441
  process_one_work+0x92b/0x1530 kernel/workqueue.c:2269
  worker_thread+0x96/0xe20 kernel/workqueue.c:2415
  kthread+0x318/0x420 kernel/kthread.c:255
  ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

Freed by task 16007:
  save_stack+0x1b/0x80 mm/kasan/common.c:69
  set_track mm/kasan/common.c:77 [inline]
  __kasan_slab_free+0x130/0x180 mm/kasan/common.c:449
  slab_free_hook mm/slub.c:1423 [inline]
  slab_free_freelist_hook mm/slub.c:1470 [inline]
  slab_free mm/slub.c:3012 [inline]
  kfree+0xe4/0x2f0 mm/slub.c:3953
  device_release+0x71/0x200 drivers/base/core.c:1064
  kobject_cleanup lib/kobject.c:693 [inline]
  kobject_release lib/kobject.c:722 [inline]
  kref_put include/linux/kref.h:65 [inline]
  kobject_put+0x171/0x280 lib/kobject.c:739
  put_device+0x1b/0x30 drivers/base/core.c:2213
  usb_put_dev+0x1f/0x30 drivers/usb/core/usb.c:725
  yurex_delete+0x40/0x330 drivers/usb/misc/yurex.c:95
  kref_put include/linux/kref.h:65 [inline]
  yurex_release+0x66/0x90 drivers/usb/misc/yurex.c:392
  __fput+0x2d7/0x840 fs/file_table.c:280
  task_work_run+0x13f/0x1c0 kernel/task_work.c:113
  tracehook_notify_resume include/linux/tracehook.h:188 [inline]
  exit_to_usermode_loop+0x1d2/0x200 arch/x86/entry/common.c:163
  prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
  syscall_return_slowpath arch/x86/entry/common.c:274 [inline]
  do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8881b1859980
  which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 72 bytes inside of
  2048-byte region [ffff8881b1859980, ffff8881b185a180)
The buggy address belongs to the page:
page:ffffea0006c61600 refcount:1 mapcount:0 mapping:ffff8881da00c000
index:0x0 compound_mapcount: 0
flags: 0x200000000010200(slab|head)
raw: 0200000000010200 0000000000000000 0000000100000001 ffff8881da00c000
raw: 0000000000000000 00000000000f000f 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff8881b1859880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffff8881b1859900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
> ffff8881b1859980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                               ^
  ffff8881b1859a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8881b1859a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

A quick look at the yurex_delete() shows that we drop the reference
to the usb_device before releasing any buffers associated with the
device. Delay the reference drop until we have finished the cleanup.

[0] https://lore.kernel.org/lkml/0000000000003f86d8058f0bd671@google.com/

Fixes: 6bc235a2e24a5e ("USB: add driver for Meywa-Denki & Kayac YUREX")
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: andreyknvl@google.com
Cc: gregkh@linuxfoundation.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: syzkaller-bugs@googlegroups.com
Cc: dtor@chromium.org
Reported-by: syzbot+d1fedb1c1fdb07fca507@syzkaller.appspotmail.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190805111528.6758-1-suzuki.poulose@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/misc/yurex.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -96,7 +96,6 @@ static void yurex_delete(struct kref *kr
 
 	dev_dbg(&dev->interface->dev, "%s\n", __func__);
 
-	usb_put_dev(dev->udev);
 	if (dev->cntl_urb) {
 		usb_kill_urb(dev->cntl_urb);
 		kfree(dev->cntl_req);
@@ -112,6 +111,7 @@ static void yurex_delete(struct kref *kr
 				dev->int_buffer, dev->urb->transfer_dma);
 		usb_free_urb(dev->urb);
 	}
+	usb_put_dev(dev->udev);
 	kfree(dev);
 }
 

[PATCH 4.9 011/103] can: peak_usb: fix potential double kfree_skb()

[Greg Kroah-Hartman]

From: Stephane Grosjean <s.grosjean@peak-system.com>

commit fee6a8923ae0d318a7f7950c6c6c28a96cea099b upstream.

When closing the CAN device while tx skbs are inflight, echo skb could
be released twice. By calling close_candev() before unlinking all
pending tx urbs, then the internal echo_skb[] array is fully and
correctly cleared before the USB write callback and, therefore,
can_get_echo_skb() are called, for each aborted URB.

Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core")
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/usb/peak_usb/pcan_usb_core.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
@@ -592,16 +592,16 @@ static int peak_usb_ndo_stop(struct net_
 	dev->state &= ~PCAN_USB_STATE_STARTED;
 	netif_stop_queue(netdev);
 
+	close_candev(netdev);
+
+	dev->can.state = CAN_STATE_STOPPED;
+
 	/* unlink all pending urbs and free used memory */
 	peak_usb_unlink_all_urbs(dev);
 
 	if (dev->adapter->dev_stop)
 		dev->adapter->dev_stop(dev);
 
-	close_candev(netdev);
-
-	dev->can.state = CAN_STATE_STOPPED;
-
 	/* can set bus off now */
 	if (dev->adapter->dev_set_bus) {
 		int err = dev->adapter->dev_set_bus(dev, 0);

[PATCH 4.9 012/103] netfilter: nfnetlink: avoid deadlock due to synchronous request_module

[Greg Kroah-Hartman]

[ Upstream commit 1b0890cd60829bd51455dc5ad689ed58c4408227 ]

Thomas and Juliana report a deadlock when running:

(rmmod nf_conntrack_netlink/xfrm_user)

  conntrack -e NEW -E &
  modprobe -v xfrm_user

They provided following analysis:

conntrack -e NEW -E
    netlink_bind()
        netlink_lock_table() -> increases "nl_table_users"
            nfnetlink_bind()
            # does not unlock the table as it's locked by netlink_bind()
                __request_module()
                    call_usermodehelper_exec()

This triggers "modprobe nf_conntrack_netlink" from kernel, netlink_bind()
won't return until modprobe process is done.

"modprobe xfrm_user":
    xfrm_user_init()
        register_pernet_subsys()
            -> grab pernet_ops_rwsem
                ..
                netlink_table_grab()
                    calls schedule() as "nl_table_users" is non-zero

so modprobe is blocked because netlink_bind() increased
nl_table_users while also holding pernet_ops_rwsem.

"modprobe nf_conntrack_netlink" runs and inits nf_conntrack_netlink:
    ctnetlink_init()
        register_pernet_subsys()
            -> blocks on "pernet_ops_rwsem" thanks to xfrm_user module

both modprobe processes wait on one another -- neither can make
progress.

Switch netlink_bind() to "nowait" modprobe -- this releases the netlink
table lock, which then allows both modprobe instances to complete.

Reported-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Reported-by: Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nfnetlink.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c
index 2278d9ab723bf..9837a61cb3e3b 100644
--- a/net/netfilter/nfnetlink.c
+++ b/net/netfilter/nfnetlink.c
@@ -490,7 +490,7 @@ static int nfnetlink_bind(struct net *net, int group)
 	ss = nfnetlink_get_subsys(type << 8);
 	rcu_read_unlock();
 	if (!ss)
-		request_module("nfnetlink-subsys-%d", type);
+		request_module_nowait("nfnetlink-subsys-%d", type);
 	return 0;
 }
 #endif
-- 
2.20.1

[PATCH 4.9 013/103] iscsi_ibft: make ISCSI_IBFT dependson ACPI instead of ISCSI_IBFT_FIND

[Greg Kroah-Hartman]

[ Upstream commit 94bccc34071094c165c79b515d21b63c78f7e968 ]

iscsi_ibft can use ACPI to find the iBFT entry during bootup,
currently, ISCSI_IBFT depends on ISCSI_IBFT_FIND which is
a X86 legacy way to find the iBFT by searching through the
low memory. This patch changes the dependency so that other
arch like ARM64 can use ISCSI_IBFT as long as the arch supports
ACPI.

ibft_init() needs to use the global variable ibft_addr declared
in iscsi_ibft_find.c. A #ifndef CONFIG_ISCSI_IBFT_FIND is needed
to declare the variable if CONFIG_ISCSI_IBFT_FIND is not selected.
Moving ibft_addr into the iscsi_ibft.c does not work because if
ISCSI_IBFT is selected as a module, the arch/x86/kernel/setup.c won't
be able to find the variable at compile time.

Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/Kconfig      | 5 +++--
 drivers/firmware/iscsi_ibft.c | 4 ++++
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index bca172d42c743..854df538ae01e 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -144,7 +144,7 @@ config DMI_SCAN_MACHINE_NON_EFI_FALLBACK
 
 config ISCSI_IBFT_FIND
 	bool "iSCSI Boot Firmware Table Attributes"
-	depends on X86 && ACPI
+	depends on X86 && ISCSI_IBFT
 	default n
 	help
 	  This option enables the kernel to find the region of memory
@@ -155,7 +155,8 @@ config ISCSI_IBFT_FIND
 config ISCSI_IBFT
 	tristate "iSCSI Boot Firmware Table Attributes module"
 	select ISCSI_BOOT_SYSFS
-	depends on ISCSI_IBFT_FIND && SCSI && SCSI_LOWLEVEL
+	select ISCSI_IBFT_FIND if X86
+	depends on ACPI && SCSI && SCSI_LOWLEVEL
 	default	n
 	help
 	  This option enables support for detection and exposing of iSCSI
diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index 132b9bae4b6aa..220bbc91cebdb 100644
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -93,6 +93,10 @@ MODULE_DESCRIPTION("sysfs interface to BIOS iBFT information");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(IBFT_ISCSI_VERSION);
 
+#ifndef CONFIG_ISCSI_IBFT_FIND
+struct acpi_table_ibft *ibft_addr;
+#endif
+
 struct ibft_hdr {
 	u8 id;
 	u8 version;
-- 
2.20.1

[PATCH 4.9 014/103] mac80211: dont warn about CW params when not using them

[Greg Kroah-Hartman]

[ Upstream commit d2b3fe42bc629c2d4002f652b3abdfb2e72991c7 ]

ieee80211_set_wmm_default() normally sets up the initial CW min/max for
each queue, except that it skips doing this if the driver doesn't
support ->conf_tx. We still end up calling drv_conf_tx() in some cases
(e.g., ieee80211_reconfig()), which also still won't do anything
useful...except it complains here about the invalid CW parameters.

Let's just skip the WARN if we weren't going to do anything useful with
the parameters.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20190718015712.197499-1-briannorris@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/driver-ops.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/driver-ops.c b/net/mac80211/driver-ops.c
index bb886e7db47f1..f783d1377d9a8 100644
--- a/net/mac80211/driver-ops.c
+++ b/net/mac80211/driver-ops.c
@@ -169,11 +169,16 @@ int drv_conf_tx(struct ieee80211_local *local,
 	if (!check_sdata_in_driver(sdata))
 		return -EIO;
 
-	if (WARN_ONCE(params->cw_min == 0 ||
-		      params->cw_min > params->cw_max,
-		      "%s: invalid CW_min/CW_max: %d/%d\n",
-		      sdata->name, params->cw_min, params->cw_max))
+	if (params->cw_min == 0 || params->cw_min > params->cw_max) {
+		/*
+		 * If we can't configure hardware anyway, don't warn. We may
+		 * never have initialized the CW parameters.
+		 */
+		WARN_ONCE(local->ops->conf_tx,
+			  "%s: invalid CW_min/CW_max: %d/%d\n",
+			  sdata->name, params->cw_min, params->cw_max);
 		return -EINVAL;
+	}
 
 	trace_drv_conf_tx(local, sdata, ac, params);
 	if (local->ops->conf_tx)
-- 
2.20.1

[PATCH 4.9 015/103] hwmon: (nct6775) Fix register address and added missed tolerance for nct6106

[Greg Kroah-Hartman]

[ Upstream commit f3d43e2e45fd9d44ba52d20debd12cd4ee9c89bf ]

Fixed address of third NCT6106_REG_WEIGHT_DUTY_STEP, and
added missed NCT6106_REG_TOLERANCE_H.

Fixes: 6c009501ff200 ("hwmon: (nct6775) Add support for NCT6102D/6106D")
Signed-off-by: Bjoern Gerhart <gerhart@posteo.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/nct6775.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c
index 2b31b84d0a5b9..006f090c1b0a7 100644
--- a/drivers/hwmon/nct6775.c
+++ b/drivers/hwmon/nct6775.c
@@ -698,7 +698,7 @@ static const u16 NCT6106_REG_TARGET[] = { 0x111, 0x121, 0x131 };
 static const u16 NCT6106_REG_WEIGHT_TEMP_SEL[] = { 0x168, 0x178, 0x188 };
 static const u16 NCT6106_REG_WEIGHT_TEMP_STEP[] = { 0x169, 0x179, 0x189 };
 static const u16 NCT6106_REG_WEIGHT_TEMP_STEP_TOL[] = { 0x16a, 0x17a, 0x18a };
-static const u16 NCT6106_REG_WEIGHT_DUTY_STEP[] = { 0x16b, 0x17b, 0x17c };
+static const u16 NCT6106_REG_WEIGHT_DUTY_STEP[] = { 0x16b, 0x17b, 0x18b };
 static const u16 NCT6106_REG_WEIGHT_TEMP_BASE[] = { 0x16c, 0x17c, 0x18c };
 static const u16 NCT6106_REG_WEIGHT_DUTY_BASE[] = { 0x16d, 0x17d, 0x18d };
 
@@ -3481,6 +3481,7 @@ static int nct6775_probe(struct platform_device *pdev)
 		data->REG_FAN_TIME[0] = NCT6106_REG_FAN_STOP_TIME;
 		data->REG_FAN_TIME[1] = NCT6106_REG_FAN_STEP_UP_TIME;
 		data->REG_FAN_TIME[2] = NCT6106_REG_FAN_STEP_DOWN_TIME;
+		data->REG_TOLERANCE_H = NCT6106_REG_TOLERANCE_H;
 		data->REG_PWM[0] = NCT6106_REG_PWM;
 		data->REG_PWM[1] = NCT6106_REG_FAN_START_OUTPUT;
 		data->REG_PWM[2] = NCT6106_REG_FAN_STOP_OUTPUT;
-- 
2.20.1

[PATCH 4.9 016/103] cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init()

[Greg Kroah-Hartman]

[ Upstream commit e0a12445d1cb186d875410d093a00d215bec6a89 ]

The cpu variable is still being used in the of_get_property() call
after the of_node_put() call, which may result in use-after-free.

Fixes: a9acc26b75f6 ("cpufreq/pasemi: fix possible object reference leak")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/pasemi-cpufreq.c | 23 +++++++++--------------
 1 file changed, 9 insertions(+), 14 deletions(-)

diff --git a/drivers/cpufreq/pasemi-cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c
index 58c933f483004..991b6a3062c4f 100644
--- a/drivers/cpufreq/pasemi-cpufreq.c
+++ b/drivers/cpufreq/pasemi-cpufreq.c
@@ -145,10 +145,18 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	int err = -ENODEV;
 
 	cpu = of_get_cpu_node(policy->cpu, NULL);
+	if (!cpu)
+		goto out;
 
+	max_freqp = of_get_property(cpu, "clock-frequency", NULL);
 	of_node_put(cpu);
-	if (!cpu)
+	if (!max_freqp) {
+		err = -EINVAL;
 		goto out;
+	}
+
+	/* we need the freq in kHz */
+	max_freq = *max_freqp / 1000;
 
 	dn = of_find_compatible_node(NULL, NULL, "1682m-sdc");
 	if (!dn)
@@ -185,16 +193,6 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	}
 
 	pr_debug("init cpufreq on CPU %d\n", policy->cpu);
-
-	max_freqp = of_get_property(cpu, "clock-frequency", NULL);
-	if (!max_freqp) {
-		err = -EINVAL;
-		goto out_unmap_sdcpwr;
-	}
-
-	/* we need the freq in kHz */
-	max_freq = *max_freqp / 1000;
-
 	pr_debug("max clock-frequency is at %u kHz\n", max_freq);
 	pr_debug("initializing frequency table\n");
 
@@ -212,9 +210,6 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	return cpufreq_generic_init(policy, pas_freqs, get_gizmo_latency());
 
-out_unmap_sdcpwr:
-	iounmap(sdcpwr_mapbase);
-
 out_unmap_sdcasr:
 	iounmap(sdcasr_mapbase);
 out:
-- 
2.20.1

[PATCH 4.9 017/103] s390/qdio: add sanity checks to the fast-requeue path

[Greg Kroah-Hartman]

[ Upstream commit a6ec414a4dd529eeac5c3ea51c661daba3397108 ]

If the device driver were to send out a full queue's worth of SBALs,
current code would end up discovering the last of those SBALs as PRIMED
and erroneously skip the SIGA-w. This immediately stalls the queue.

Add a check to not attempt fast-requeue in this case. While at it also
make sure that the state of the previous SBAL was successfully extracted
before inspecting it.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/cio/qdio_main.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index 58cd0e0c9680b..b65cab4448021 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -1576,13 +1576,13 @@ static int handle_outbound(struct qdio_q *q, unsigned int callflags,
 		rc = qdio_kick_outbound_q(q, phys_aob);
 	} else if (need_siga_sync(q)) {
 		rc = qdio_siga_sync_q(q);
+	} else if (count < QDIO_MAX_BUFFERS_PER_Q &&
+		   get_buf_state(q, prev_buf(bufnr), &state, 0) > 0 &&
+		   state == SLSB_CU_OUTPUT_PRIMED) {
+		/* The previous buffer is not processed yet, tack on. */
+		qperf_inc(q, fast_requeue);
 	} else {
-		/* try to fast requeue buffers */
-		get_buf_state(q, prev_buf(bufnr), &state, 0);
-		if (state != SLSB_CU_OUTPUT_PRIMED)
-			rc = qdio_kick_outbound_q(q, 0);
-		else
-			qperf_inc(q, fast_requeue);
+		rc = qdio_kick_outbound_q(q, 0);
 	}
 
 	/* in case of SIGA errors we must process the error immediately */
-- 
2.20.1

[PATCH 4.9 018/103] ALSA: compress: Fix regression on compressed capture streams

[Greg Kroah-Hartman]

[ Upstream commit 4475f8c4ab7b248991a60d9c02808dbb813d6be8 ]

A previous fix to the stop handling on compressed capture streams causes
some knock on issues. The previous fix updated snd_compr_drain_notify to
set the state back to PREPARED for capture streams. This causes some
issues however as the handling for snd_compr_poll differs between the
two states and some user-space applications were relying on the poll
failing after the stream had been stopped.

To correct this regression whilst still fixing the original problem the
patch was addressing, update the capture handling to skip the PREPARED
state rather than skipping the SETUP state as it has done until now.

Fixes: 4f2ab5e1d13d ("ALSA: compress: Fix stop handling on compressed capture streams")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/sound/compress_driver.h |  5 +----
 sound/core/compress_offload.c   | 16 +++++++++++-----
 2 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/include/sound/compress_driver.h b/include/sound/compress_driver.h
index 96bc5acdade38..49482080311a1 100644
--- a/include/sound/compress_driver.h
+++ b/include/sound/compress_driver.h
@@ -185,10 +185,7 @@ static inline void snd_compr_drain_notify(struct snd_compr_stream *stream)
 	if (snd_BUG_ON(!stream))
 		return;
 
-	if (stream->direction == SND_COMPRESS_PLAYBACK)
-		stream->runtime->state = SNDRV_PCM_STATE_SETUP;
-	else
-		stream->runtime->state = SNDRV_PCM_STATE_PREPARED;
+	stream->runtime->state = SNDRV_PCM_STATE_SETUP;
 
 	wake_up(&stream->runtime->sleep);
 }
diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c
index 555df64d46ffc..cf1317546b0ff 100644
--- a/sound/core/compress_offload.c
+++ b/sound/core/compress_offload.c
@@ -575,10 +575,7 @@ snd_compr_set_params(struct snd_compr_stream *stream, unsigned long arg)
 		stream->metadata_set = false;
 		stream->next_track = false;
 
-		if (stream->direction == SND_COMPRESS_PLAYBACK)
-			stream->runtime->state = SNDRV_PCM_STATE_SETUP;
-		else
-			stream->runtime->state = SNDRV_PCM_STATE_PREPARED;
+		stream->runtime->state = SNDRV_PCM_STATE_SETUP;
 	} else {
 		return -EPERM;
 	}
@@ -694,8 +691,17 @@ static int snd_compr_start(struct snd_compr_stream *stream)
 {
 	int retval;
 
-	if (stream->runtime->state != SNDRV_PCM_STATE_PREPARED)
+	switch (stream->runtime->state) {
+	case SNDRV_PCM_STATE_SETUP:
+		if (stream->direction != SND_COMPRESS_CAPTURE)
+			return -EPERM;
+		break;
+	case SNDRV_PCM_STATE_PREPARED:
+		break;
+	default:
 		return -EPERM;
+	}
+
 	retval = stream->ops->trigger(stream, SNDRV_PCM_TRIGGER_START);
 	if (!retval)
 		stream->runtime->state = SNDRV_PCM_STATE_RUNNING;
-- 
2.20.1

[PATCH 4.9 019/103] ALSA: compress: Prevent bypasses of set_params

[Greg Kroah-Hartman]

[ Upstream commit 26c3f1542f5064310ad26794c09321780d00c57d ]

Currently, whilst in SNDRV_PCM_STATE_OPEN it is possible to call
snd_compr_stop, snd_compr_drain and snd_compr_partial_drain, which
allow a transition to SNDRV_PCM_STATE_SETUP. The stream should
only be able to move to the setup state once it has received a
SNDRV_COMPRESS_SET_PARAMS ioctl. Fix this issue by not allowing
those ioctls whilst in the open state.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/compress_offload.c | 30 ++++++++++++++++++++++++------
 1 file changed, 24 insertions(+), 6 deletions(-)

diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c
index cf1317546b0ff..1538fbc7562b8 100644
--- a/sound/core/compress_offload.c
+++ b/sound/core/compress_offload.c
@@ -712,9 +712,15 @@ static int snd_compr_stop(struct snd_compr_stream *stream)
 {
 	int retval;
 
-	if (stream->runtime->state == SNDRV_PCM_STATE_PREPARED ||
-			stream->runtime->state == SNDRV_PCM_STATE_SETUP)
+	switch (stream->runtime->state) {
+	case SNDRV_PCM_STATE_OPEN:
+	case SNDRV_PCM_STATE_SETUP:
+	case SNDRV_PCM_STATE_PREPARED:
 		return -EPERM;
+	default:
+		break;
+	}
+
 	retval = stream->ops->trigger(stream, SNDRV_PCM_TRIGGER_STOP);
 	if (!retval) {
 		snd_compr_drain_notify(stream);
@@ -802,9 +808,14 @@ static int snd_compr_drain(struct snd_compr_stream *stream)
 {
 	int retval;
 
-	if (stream->runtime->state == SNDRV_PCM_STATE_PREPARED ||
-			stream->runtime->state == SNDRV_PCM_STATE_SETUP)
+	switch (stream->runtime->state) {
+	case SNDRV_PCM_STATE_OPEN:
+	case SNDRV_PCM_STATE_SETUP:
+	case SNDRV_PCM_STATE_PREPARED:
 		return -EPERM;
+	default:
+		break;
+	}
 
 	retval = stream->ops->trigger(stream, SND_COMPR_TRIGGER_DRAIN);
 	if (retval) {
@@ -841,9 +852,16 @@ static int snd_compr_next_track(struct snd_compr_stream *stream)
 static int snd_compr_partial_drain(struct snd_compr_stream *stream)
 {
 	int retval;
-	if (stream->runtime->state == SNDRV_PCM_STATE_PREPARED ||
-			stream->runtime->state == SNDRV_PCM_STATE_SETUP)
+
+	switch (stream->runtime->state) {
+	case SNDRV_PCM_STATE_OPEN:
+	case SNDRV_PCM_STATE_SETUP:
+	case SNDRV_PCM_STATE_PREPARED:
 		return -EPERM;
+	default:
+		break;
+	}
+
 	/* stream can be drained only when next track has been signalled */
 	if (stream->next_track == false)
 		return -EPERM;
-- 
2.20.1

[PATCH 4.9 020/103] ALSA: compress: Dont allow paritial drain operations on capture streams

[Greg Kroah-Hartman]

[ Upstream commit a70ab8a8645083f3700814e757f2940a88b7ef88 ]

Partial drain and next track are intended for gapless playback and
don't really have an obvious interpretation for a capture stream, so
makes sense to not allow those operations on capture streams.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/compress_offload.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c
index 1538fbc7562b8..b4f1536b17cb5 100644
--- a/sound/core/compress_offload.c
+++ b/sound/core/compress_offload.c
@@ -835,6 +835,10 @@ static int snd_compr_next_track(struct snd_compr_stream *stream)
 	if (stream->runtime->state != SNDRV_PCM_STATE_RUNNING)
 		return -EPERM;
 
+	/* next track doesn't have any meaning for capture streams */
+	if (stream->direction == SND_COMPRESS_CAPTURE)
+		return -EPERM;
+
 	/* you can signal next track if this is intended to be a gapless stream
 	 * and current track metadata is set
 	 */
@@ -862,6 +866,10 @@ static int snd_compr_partial_drain(struct snd_compr_stream *stream)
 		break;
 	}
 
+	/* partial drain doesn't have any meaning for capture streams */
+	if (stream->direction == SND_COMPRESS_CAPTURE)
+		return -EPERM;
+
 	/* stream can be drained only when next track has been signalled */
 	if (stream->next_track == false)
 		return -EPERM;
-- 
2.20.1

[PATCH 4.9 021/103] ALSA: compress: Be more restrictive about when a drain is allowed

[Greg Kroah-Hartman]

[ Upstream commit 3b8179944cb0dd53e5223996966746cdc8a60657 ]

Draining makes little sense in the situation of hardware overrun, as the
hardware will have consumed all its available samples. Additionally,
draining whilst the stream is paused would presumably get stuck as no
data is being consumed on the DSP side.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/compress_offload.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c
index b4f1536b17cb5..2e2d184684911 100644
--- a/sound/core/compress_offload.c
+++ b/sound/core/compress_offload.c
@@ -812,7 +812,10 @@ static int snd_compr_drain(struct snd_compr_stream *stream)
 	case SNDRV_PCM_STATE_OPEN:
 	case SNDRV_PCM_STATE_SETUP:
 	case SNDRV_PCM_STATE_PREPARED:
+	case SNDRV_PCM_STATE_PAUSED:
 		return -EPERM;
+	case SNDRV_PCM_STATE_XRUN:
+		return -EPIPE;
 	default:
 		break;
 	}
@@ -861,7 +864,10 @@ static int snd_compr_partial_drain(struct snd_compr_stream *stream)
 	case SNDRV_PCM_STATE_OPEN:
 	case SNDRV_PCM_STATE_SETUP:
 	case SNDRV_PCM_STATE_PREPARED:
+	case SNDRV_PCM_STATE_PAUSED:
 		return -EPERM;
+	case SNDRV_PCM_STATE_XRUN:
+		return -EPIPE;
 	default:
 		break;
 	}
-- 
2.20.1

[PATCH 4.9 022/103] perf probe: Avoid calling freeing routine multiple times for same pointer

[Greg Kroah-Hartman]

[ Upstream commit d95daf5accf4a72005daa13fbb1d1bd8709f2861 ]

When perf_add_probe_events() we call cleanup_perf_probe_events() for the
pev pointer it receives, then, as part of handling this failure the main
'perf probe' goes on and calls cleanup_params() and that will again call
cleanup_perf_probe_events()for the same pointer, so just set nevents to
zero when handling the failure of perf_add_probe_events() to avoid the
double free.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-x8qgma4g813z96dvtw9w219q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/builtin-probe.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/tools/perf/builtin-probe.c b/tools/perf/builtin-probe.c
index 9a250c71840e9..2b420e7a92c0c 100644
--- a/tools/perf/builtin-probe.c
+++ b/tools/perf/builtin-probe.c
@@ -675,6 +675,16 @@ __cmd_probe(int argc, const char **argv, const char *prefix __maybe_unused)
 
 		ret = perf_add_probe_events(params.events, params.nevents);
 		if (ret < 0) {
+
+			/*
+			 * When perf_add_probe_events() fails it calls
+			 * cleanup_perf_probe_events(pevs, npevs), i.e.
+			 * cleanup_perf_probe_events(params.events, params.nevents), which
+			 * will call clear_perf_probe_event(), so set nevents to zero
+			 * to avoid cleanup_params() to call clear_perf_probe_event() again
+			 * on the same pevs.
+			 */
+			params.nevents = 0;
 			pr_err_with_code("  Error: Failed to add events.", ret);
 			return ret;
 		}
-- 
2.20.1

[PATCH 4.9 023/103] drbd: dynamically allocate shash descriptor

[Greg Kroah-Hartman]

[ Upstream commit 77ce56e2bfaa64127ae5e23ef136c0168b818777 ]

Building with clang and KASAN, we get a warning about an overly large
stack frame on 32-bit architectures:

drivers/block/drbd/drbd_receiver.c:921:31: error: stack frame size of 1280 bytes in function 'conn_connect'
      [-Werror,-Wframe-larger-than=]

We already allocate other data dynamically in this function, so
just do the same for the shash descriptor, which makes up most of
this memory.

Link: https://lore.kernel.org/lkml/20190617132440.2721536-1-arnd@arndb.de/
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Roland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/drbd/drbd_receiver.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index 83957a1e15ed7..8e8e4ccb128f3 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -5297,7 +5297,7 @@ static int drbd_do_auth(struct drbd_connection *connection)
 	unsigned int key_len;
 	char secret[SHARED_SECRET_MAX]; /* 64 byte */
 	unsigned int resp_size;
-	SHASH_DESC_ON_STACK(desc, connection->cram_hmac_tfm);
+	struct shash_desc *desc;
 	struct packet_info pi;
 	struct net_conf *nc;
 	int err, rv;
@@ -5310,6 +5310,13 @@ static int drbd_do_auth(struct drbd_connection *connection)
 	memcpy(secret, nc->shared_secret, key_len);
 	rcu_read_unlock();
 
+	desc = kmalloc(sizeof(struct shash_desc) +
+		       crypto_shash_descsize(connection->cram_hmac_tfm),
+		       GFP_KERNEL);
+	if (!desc) {
+		rv = -1;
+		goto fail;
+	}
 	desc->tfm = connection->cram_hmac_tfm;
 	desc->flags = 0;
 
@@ -5452,7 +5459,10 @@ static int drbd_do_auth(struct drbd_connection *connection)
 	kfree(peers_ch);
 	kfree(response);
 	kfree(right_response);
-	shash_desc_zero(desc);
+	if (desc) {
+		shash_desc_zero(desc);
+		kfree(desc);
+	}
 
 	return rv;
 }
-- 
2.20.1

[PATCH 4.9 024/103] ACPI/IORT: Fix off-by-one check in iort_dev_find_its_id()

[Greg Kroah-Hartman]

[ Upstream commit 5a46d3f71d5e5a9f82eabc682f996f1281705ac7 ]

Static analysis identified that index comparison against ITS entries in
iort_dev_find_its_id() is off by one.

Update the comparison condition and clarify the resulting error
message.

Fixes: 4bf2efd26d76 ("ACPI: Add new IORT functions to support MSI domain handling")
Link: https://lore.kernel.org/linux-arm-kernel/20190613065410.GB16334@mwanda/
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/arm64/iort.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 6b81746cd13c8..e5b1b3f1c2319 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -324,8 +324,8 @@ static int iort_dev_find_its_id(struct device *dev, u32 req_id,
 
 	/* Move to ITS specific data */
 	its = (struct acpi_iort_its_group *)node->node_data;
-	if (idx > its->its_count) {
-		dev_err(dev, "requested ITS ID index [%d] is greater than available [%d]\n",
+	if (idx >= its->its_count) {
+		dev_err(dev, "requested ITS ID index [%d] overruns ITS entries [%d]\n",
 			idx, its->its_count);
 		return -ENXIO;
 	}
-- 
2.20.1

[PATCH 4.9 025/103] ARM: davinci: fix sleep.S build error on ARMv4

[Greg Kroah-Hartman]

[ Upstream commit d64b212ea960db4276a1d8372bd98cb861dfcbb0 ]

When building a multiplatform kernel that includes armv4 support,
the default target CPU does not support the blx instruction,
which leads to a build failure:

arch/arm/mach-davinci/sleep.S: Assembler messages:
arch/arm/mach-davinci/sleep.S:56: Error: selected processor does not support `blx ip' in ARM mode

Add a .arch statement in the sources to make this file build.

Link: https://lore.kernel.org/r/20190722145211.1154785-1-arnd@arndb.de
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-davinci/sleep.S | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S
index cd350dee4df37..efcd400b2abb3 100644
--- a/arch/arm/mach-davinci/sleep.S
+++ b/arch/arm/mach-davinci/sleep.S
@@ -37,6 +37,7 @@
 #define DEEPSLEEP_SLEEPENABLE_BIT	BIT(31)
 
 	.text
+	.arch	armv5te
 /*
  * Move DaVinci into deep sleep state
  *
-- 
2.20.1

[PATCH 4.9 026/103] scsi: megaraid_sas: fix panic on loading firmware crashdump

[Greg Kroah-Hartman]

[ Upstream commit 3b5f307ef3cb5022bfe3c8ca5b8f2114d5bf6c29 ]

While loading fw crashdump in function fw_crash_buffer_show(), left bytes
in one dma chunk was not checked, if copying size over it, overflow access
will cause kernel panic.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/megaraid/megaraid_sas_base.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 5b1c37e3913cd..d90693b2767fd 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -2847,6 +2847,7 @@ megasas_fw_crash_buffer_show(struct device *cdev,
 	u32 size;
 	unsigned long buff_addr;
 	unsigned long dmachunk = CRASH_DMA_BUF_SIZE;
+	unsigned long chunk_left_bytes;
 	unsigned long src_addr;
 	unsigned long flags;
 	u32 buff_offset;
@@ -2872,6 +2873,8 @@ megasas_fw_crash_buffer_show(struct device *cdev,
 	}
 
 	size = (instance->fw_crash_buffer_size * dmachunk) - buff_offset;
+	chunk_left_bytes = dmachunk - (buff_offset % dmachunk);
+	size = (size > chunk_left_bytes) ? chunk_left_bytes : size;
 	size = (size >= PAGE_SIZE) ? (PAGE_SIZE - 1) : size;
 
 	src_addr = (unsigned long)instance->crash_buf[buff_offset / dmachunk] +
-- 
2.20.1

[PATCH 4.9 027/103] scsi: ibmvfc: fix WARN_ON during event pool release

[Greg Kroah-Hartman]

[ Upstream commit 5578257ca0e21056821e6481bd534ba267b84e58 ]

While removing an ibmvfc client adapter a WARN_ON like the following
WARN_ON is seen in the kernel log:

WARNING: CPU: 6 PID: 5421 at ./include/linux/dma-mapping.h:541
ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc]
CPU: 6 PID: 5421 Comm: rmmod Tainted: G            E     4.17.0-rc1-next-20180419-autotest #1
NIP:  d00000000290328c LR: d00000000290325c CTR: c00000000036ee20
REGS: c000000288d1b7e0 TRAP: 0700   Tainted: G            E      (4.17.0-rc1-next-20180419-autotest)
MSR:  800000010282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]>  CR: 44008828  XER: 20000000
CFAR: c00000000036e408 SOFTE: 1
GPR00: d00000000290325c c000000288d1ba60 d000000002917900 c000000289d75448
GPR04: 0000000000000071 c0000000ff870000 0000000018040000 0000000000000001
GPR08: 0000000000000000 c00000000156e838 0000000000000001 d00000000290c640
GPR12: c00000000036ee20 c00000001ec4dc00 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 00000100276901e0 0000000010020598
GPR20: 0000000010020550 0000000010020538 0000000010020578 00000000100205b0
GPR24: 0000000000000000 0000000000000000 0000000010020590 5deadbeef0000100
GPR28: 5deadbeef0000200 d000000002910b00 0000000000000071 c0000002822f87d8
NIP [d00000000290328c] ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc]
LR [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc]
Call Trace:
[c000000288d1ba60] [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc] (unreliable)
[c000000288d1baf0] [d000000002909390] ibmvfc_abort_task_set+0x7b0/0x8b0 [ibmvfc]
[c000000288d1bb70] [c0000000000d8c68] vio_bus_remove+0x68/0x100
[c000000288d1bbb0] [c0000000007da7c4] device_release_driver_internal+0x1f4/0x2d0
[c000000288d1bc00] [c0000000007da95c] driver_detach+0x7c/0x100
[c000000288d1bc40] [c0000000007d8af4] bus_remove_driver+0x84/0x140
[c000000288d1bcb0] [c0000000007db6ac] driver_unregister+0x4c/0xa0
[c000000288d1bd20] [c0000000000d6e7c] vio_unregister_driver+0x2c/0x50
[c000000288d1bd50] [d00000000290ba0c] cleanup_module+0x24/0x15e0 [ibmvfc]
[c000000288d1bd70] [c0000000001dadb0] sys_delete_module+0x220/0x2d0
[c000000288d1be30] [c00000000000b284] system_call+0x58/0x6c
Instruction dump:
e8410018 e87f0068 809f0078 e8bf0080 e8df0088 2fa30000 419e008c e9230200
2fa90000 419e0080 894d098a 794a07e0 <0b0a0000> e9290008 2fa90000 419e0028

This is tripped as a result of irqs being disabled during the call to
dma_free_coherent() by ibmvfc_free_event_pool(). At this point in the code path
we have quiesced the adapter and its overly paranoid anyways to be holding the
host lock.

Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 7e487c78279cb..54dea767dfde9 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -4883,8 +4883,8 @@ static int ibmvfc_remove(struct vio_dev *vdev)
 
 	spin_lock_irqsave(vhost->host->host_lock, flags);
 	ibmvfc_purge_requests(vhost, DID_ERROR);
-	ibmvfc_free_event_pool(vhost);
 	spin_unlock_irqrestore(vhost->host->host_lock, flags);
+	ibmvfc_free_event_pool(vhost);
 
 	ibmvfc_free_mem(vhost);
 	spin_lock(&ibmvfc_driver_lock);
-- 
2.20.1

[PATCH 4.9 028/103] scsi: scsi_dh_alua: always use a 2 second delay before retrying RTPG

[Greg Kroah-Hartman]

[ Upstream commit 20122994e38aef0ae50555884d287adde6641c94 ]

Retrying immediately after we've received a 'transitioning' sense code is
pretty much pointless, we should always use a delay before retrying.  So
ensure the default delay is applied before retrying.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Tested-by: Zhangguanghui <zhang.guanghui@h3c.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/device_handler/scsi_dh_alua.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index d3145799b92fa..98787588247bf 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -53,6 +53,7 @@
 #define ALUA_FAILOVER_TIMEOUT		60
 #define ALUA_FAILOVER_RETRIES		5
 #define ALUA_RTPG_DELAY_MSECS		5
+#define ALUA_RTPG_RETRY_DELAY		2
 
 /* device handler flags */
 #define ALUA_OPTIMIZE_STPG		0x01
@@ -681,7 +682,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg)
 	case SCSI_ACCESS_STATE_TRANSITIONING:
 		if (time_before(jiffies, pg->expiry)) {
 			/* State transition, retry */
-			pg->interval = 2;
+			pg->interval = ALUA_RTPG_RETRY_DELAY;
 			err = SCSI_DH_RETRY;
 		} else {
 			struct alua_dh_data *h;
@@ -809,6 +810,8 @@ static void alua_rtpg_work(struct work_struct *work)
 				spin_lock_irqsave(&pg->lock, flags);
 				pg->flags &= ~ALUA_PG_RUNNING;
 				pg->flags |= ALUA_PG_RUN_RTPG;
+				if (!pg->interval)
+					pg->interval = ALUA_RTPG_RETRY_DELAY;
 				spin_unlock_irqrestore(&pg->lock, flags);
 				queue_delayed_work(alua_wq, &pg->rtpg_work,
 						   pg->interval * HZ);
@@ -820,6 +823,8 @@ static void alua_rtpg_work(struct work_struct *work)
 		spin_lock_irqsave(&pg->lock, flags);
 		if (err == SCSI_DH_RETRY || pg->flags & ALUA_PG_RUN_RTPG) {
 			pg->flags &= ~ALUA_PG_RUNNING;
+			if (!pg->interval && !(pg->flags & ALUA_PG_RUN_RTPG))
+				pg->interval = ALUA_RTPG_RETRY_DELAY;
 			pg->flags |= ALUA_PG_RUN_RTPG;
 			spin_unlock_irqrestore(&pg->lock, flags);
 			queue_delayed_work(alua_wq, &pg->rtpg_work,
-- 
2.20.1

[PATCH 4.9 029/103] tty/ldsem, locking/rwsem: Add missing ACQUIRE to read_failed sleep loop

[Greg Kroah-Hartman]

[ Upstream commit 952041a8639a7a3a73a2b6573cb8aa8518bc39f8 ]

While reviewing rwsem down_slowpath, Will noticed ldsem had a copy of
a bug we just found for rwsem.

  X = 0;

  CPU0			CPU1

  rwsem_down_read()
    for (;;) {
      set_current_state(TASK_UNINTERRUPTIBLE);

                        X = 1;
                        rwsem_up_write();
                          rwsem_mark_wake()
                            atomic_long_add(adjustment, &sem->count);
                            smp_store_release(&waiter->task, NULL);

      if (!waiter.task)
        break;

      ...
    }

  r = X;

Allows 'r == 0'.

Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 4898e640caf0 ("tty: Add timed, writer-prioritized rw semaphore")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/tty_ldsem.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/tty_ldsem.c b/drivers/tty/tty_ldsem.c
index dbd7ba32caac3..6c5eb99fcfcee 100644
--- a/drivers/tty/tty_ldsem.c
+++ b/drivers/tty/tty_ldsem.c
@@ -137,8 +137,7 @@ static void __ldsem_wake_readers(struct ld_semaphore *sem)
 
 	list_for_each_entry_safe(waiter, next, &sem->read_wait, list) {
 		tsk = waiter->task;
-		smp_mb();
-		waiter->task = NULL;
+		smp_store_release(&waiter->task, NULL);
 		wake_up_process(tsk);
 		put_task_struct(tsk);
 	}
@@ -234,7 +233,7 @@ down_read_failed(struct ld_semaphore *sem, long count, long timeout)
 	for (;;) {
 		set_task_state(tsk, TASK_UNINTERRUPTIBLE);
 
-		if (!waiter.task)
+		if (!smp_load_acquire(&waiter.task))
 			break;
 		if (!timeout)
 			break;
-- 
2.20.1

[PATCH 4.9 030/103] perf/core: Fix creating kernel counters for PMUs that override event->cpu

[Greg Kroah-Hartman]

[ Upstream commit 4ce54af8b33d3e21ca935fc1b89b58cbba956051 ]

Some hardware PMU drivers will override perf_event.cpu inside their
event_init callback. This causes a lockdep splat when initialized through
the kernel API:

 WARNING: CPU: 0 PID: 250 at kernel/events/core.c:2917 ctx_sched_out+0x78/0x208
 pc : ctx_sched_out+0x78/0x208
 Call trace:
  ctx_sched_out+0x78/0x208
  __perf_install_in_context+0x160/0x248
  remote_function+0x58/0x68
  generic_exec_single+0x100/0x180
  smp_call_function_single+0x174/0x1b8
  perf_install_in_context+0x178/0x188
  perf_event_create_kernel_counter+0x118/0x160

Fix this by calling perf_install_in_context with event->cpu, just like
perf_event_open

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Frank Li <Frank.li@nxp.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/c4ebe0503623066896d7046def4d6b1e06e0eb2e.1563972056.git.leonard.crestez@nxp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index 93d7333c64d89..5bbf7537a6121 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -10130,7 +10130,7 @@ perf_event_create_kernel_counter(struct perf_event_attr *attr, int cpu,
 		goto err_unlock;
 	}
 
-	perf_install_in_context(ctx, event, cpu);
+	perf_install_in_context(ctx, event, event->cpu);
 	perf_unpin_context(ctx);
 	mutex_unlock(&ctx->mutex);
 
-- 
2.20.1

[PATCH 4.9 031/103] can: peak_usb: pcan_usb_pro: Fix info-leaks to USB devices

[Greg Kroah-Hartman]

From: Tomas Bortoli <tomasbortoli@gmail.com>

commit ead16e53c2f0ed946d82d4037c630e2f60f4ab69 upstream.

Uninitialized Kernel memory can leak to USB devices.

Fix by using kzalloc() instead of kmalloc() on the affected buffers.

Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+d6a5a1a3657b596ef132@syzkaller.appspotmail.com
Fixes: f14e22435a27 ("net: can: peak_usb: Do not do dma on the stack")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/usb/peak_usb/pcan_usb_pro.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
@@ -500,7 +500,7 @@ static int pcan_usb_pro_drv_loaded(struc
 	u8 *buffer;
 	int err;
 
-	buffer = kmalloc(PCAN_USBPRO_FCT_DRVLD_REQ_LEN, GFP_KERNEL);
+	buffer = kzalloc(PCAN_USBPRO_FCT_DRVLD_REQ_LEN, GFP_KERNEL);
 	if (!buffer)
 		return -ENOMEM;
 

[PATCH 4.9 032/103] can: peak_usb: pcan_usb_fd: Fix info-leaks to USB devices

[Greg Kroah-Hartman]

From: Tomas Bortoli <tomasbortoli@gmail.com>

commit 30a8beeb3042f49d0537b7050fd21b490166a3d9 upstream.

Uninitialized Kernel memory can leak to USB devices.

Fix by using kzalloc() instead of kmalloc() on the affected buffers.

Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+513e4d0985298538bf9b@syzkaller.appspotmail.com
Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/usb/peak_usb/pcan_usb_fd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
@@ -851,7 +851,7 @@ static int pcan_usb_fd_init(struct peak_
 			goto err_out;
 
 		/* allocate command buffer once for all for the interface */
-		pdev->cmd_buffer_addr = kmalloc(PCAN_UFD_CMD_BUFFER_SIZE,
+		pdev->cmd_buffer_addr = kzalloc(PCAN_UFD_CMD_BUFFER_SIZE,
 						GFP_KERNEL);
 		if (!pdev->cmd_buffer_addr)
 			goto err_out_1;

[PATCH 4.9 033/103] hwmon: (nct7802) Fix wrong detection of in4 presence

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

commit 38ada2f406a9b81fb1249c5c9227fa657e7d5671 upstream.

The code to detect if in4 is present is wrong; if in4 is not present,
the in4_input sysfs attribute is still present.

In detail:

- Ihen RTD3_MD=11 (VSEN3 present), everything is as expected (no bug).
- If we have RTD3_MD!=11 (no VSEN3), we unexpectedly have a in4_input
  file under /sys and the "sensors" command displays in4_input.
  But as expected, we have no in4_min, in4_max, in4_alarm, in4_beep.

Fix is_visible function to detect and report in4_input visibility
as expected.

Reported-by: Gilles Buloz <Gilles.Buloz@kontron.com>
Cc: Gilles Buloz <Gilles.Buloz@kontron.com>
Cc: stable@vger.kernel.org
Fixes: 3434f37835804 ("hwmon: Driver for Nuvoton NCT7802Y")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hwmon/nct7802.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/hwmon/nct7802.c
+++ b/drivers/hwmon/nct7802.c
@@ -768,7 +768,7 @@ static struct attribute *nct7802_in_attr
 	&sensor_dev_attr_in3_alarm.dev_attr.attr,
 	&sensor_dev_attr_in3_beep.dev_attr.attr,
 
-	&sensor_dev_attr_in4_input.dev_attr.attr,	/* 17 */
+	&sensor_dev_attr_in4_input.dev_attr.attr,	/* 16 */
 	&sensor_dev_attr_in4_min.dev_attr.attr,
 	&sensor_dev_attr_in4_max.dev_attr.attr,
 	&sensor_dev_attr_in4_alarm.dev_attr.attr,
@@ -794,9 +794,9 @@ static umode_t nct7802_in_is_visible(str
 
 	if (index >= 6 && index < 11 && (reg & 0x03) != 0x03)	/* VSEN1 */
 		return 0;
-	if (index >= 11 && index < 17 && (reg & 0x0c) != 0x0c)	/* VSEN2 */
+	if (index >= 11 && index < 16 && (reg & 0x0c) != 0x0c)	/* VSEN2 */
 		return 0;
-	if (index >= 17 && (reg & 0x30) != 0x30)		/* VSEN3 */
+	if (index >= 16 && (reg & 0x30) != 0x30)		/* VSEN3 */
 		return 0;
 
 	return attr->mode;

[PATCH 4.9 034/103] ALSA: firewire: fix a memory leak bug

[Greg Kroah-Hartman]

From: Wenwen Wang <wenwen@cs.uga.edu>

commit 1be3c1fae6c1e1f5bb982b255d2034034454527a upstream.

In iso_packets_buffer_init(), 'b->packets' is allocated through
kmalloc_array(). Then, the aligned packet size is checked. If it is
larger than PAGE_SIZE, -EINVAL will be returned to indicate the error.
However, the allocated 'b->packets' is not deallocated on this path,
leading to a memory leak.

To fix the above issue, free 'b->packets' before returning the error code.

Fixes: 31ef9134eb52 ("ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driver")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # v2.6.39+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/firewire/packets-buffer.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/firewire/packets-buffer.c
+++ b/sound/firewire/packets-buffer.c
@@ -37,7 +37,7 @@ int iso_packets_buffer_init(struct iso_p
 	packets_per_page = PAGE_SIZE / packet_size;
 	if (WARN_ON(!packets_per_page)) {
 		err = -EINVAL;
-		goto error;
+		goto err_packets;
 	}
 	pages = DIV_ROUND_UP(count, packets_per_page);
 

[PATCH 4.9 035/103] ALSA: hda - Dont override global PCM hw info flag

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit c1c6c877b0c79fd7e05c931435aa42211eaeebaf upstream.

The commit bfcba288b97f ("ALSA - hda: Add support for link audio time
reporting") introduced the conditional PCM hw info setup, but it
overwrites the global azx_pcm_hw object.  This will cause a problem if
any other HD-audio controller, as it'll inherit the same bit flag
although another controller doesn't support that feature.

Fix the bug by setting the PCM hw info flag locally.

Fixes: bfcba288b97f ("ALSA - hda: Add support for link audio time reporting")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_controller.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/sound/pci/hda/hda_controller.c
+++ b/sound/pci/hda/hda_controller.c
@@ -609,11 +609,9 @@ static int azx_pcm_open(struct snd_pcm_s
 	}
 	runtime->private_data = azx_dev;
 
-	if (chip->gts_present)
-		azx_pcm_hw.info = azx_pcm_hw.info |
-			SNDRV_PCM_INFO_HAS_LINK_SYNCHRONIZED_ATIME;
-
 	runtime->hw = azx_pcm_hw;
+	if (chip->gts_present)
+		runtime->hw.info |= SNDRV_PCM_INFO_HAS_LINK_SYNCHRONIZED_ATIME;
 	runtime->hw.channels_min = hinfo->channels_min;
 	runtime->hw.channels_max = hinfo->channels_max;
 	runtime->hw.formats = hinfo->formats;

[PATCH 4.9 036/103] mac80211: dont WARN on short WMM parameters from AP

[Greg Kroah-Hartman]

From: Brian Norris <briannorris@chromium.org>

commit 05aaa5c97dce4c10a9e7eae2f1569a684e0c5ced upstream.

In a very similar spirit to commit c470bdc1aaf3 ("mac80211: don't WARN
on bad WMM parameters from buggy APs"), an AP may not transmit a
fully-formed WMM IE. For example, it may miss or repeat an Access
Category. The above loop won't catch that and will instead leave one of
the four ACs zeroed out. This triggers the following warning in
drv_conf_tx()

  wlan0: invalid CW_min/CW_max: 0/0

and it may leave one of the hardware queues unconfigured. If we detect
such a case, let's just print a warning and fall back to the defaults.

Tested with a hacked version of hostapd, intentionally corrupting the
IEs in hostapd_eid_wmm().

Cc: stable@vger.kernel.org
Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20190726224758.210953-1-briannorris@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/mac80211/mlme.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1873,6 +1873,16 @@ static bool ieee80211_sta_wmm_params(str
 		}
 	}
 
+	/* WMM specification requires all 4 ACIs. */
+	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
+		if (params[ac].cw_min == 0) {
+			sdata_info(sdata,
+				   "AP has invalid WMM params (missing AC %d), using defaults\n",
+				   ac);
+			return false;
+		}
+	}
+
 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
 		mlme_dbg(sdata,
 			 "WMM AC=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n",

[PATCH 4.9 037/103] SMB3: Fix deadlock in validate negotiate hits reconnect

[Greg Kroah-Hartman]

From: Pavel Shilovsky <pshilov@microsoft.com>

commit e99c63e4d86d3a94818693147b469fa70de6f945 upstream.

Currently we skip SMB2_TREE_CONNECT command when checking during
reconnect because Tree Connect happens when establishing
an SMB session. For SMB 3.0 protocol version the code also calls
validate negotiate which results in SMB2_IOCL command being sent
over the wire. This may deadlock on trying to acquire a mutex when
checking for reconnect. Fix this by skipping SMB2_IOCL command
when doing the reconnect check.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/smb2pdu.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -168,7 +168,7 @@ smb2_reconnect(__le16 smb2_command, stru
 	if (tcon == NULL)
 		return 0;
 
-	if (smb2_command == SMB2_TREE_CONNECT)
+	if (smb2_command == SMB2_TREE_CONNECT || smb2_command == SMB2_IOCTL)
 		return 0;
 
 	if (tcon->tidStatus == CifsExiting) {

[PATCH 4.9 038/103] smb3: send CAP_DFS capability during session setup

[Greg Kroah-Hartman]

From: Steve French <stfrench@microsoft.com>

commit 8d33096a460d5b9bd13300f01615df5bb454db10 upstream.

We had a report of a server which did not do a DFS referral
because the session setup Capabilities field was set to 0
(unlike negotiate protocol where we set CAP_DFS).  Better to
send it session setup in the capabilities as well (this also
more closely matches Windows client behavior).

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/smb2pdu.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -660,7 +660,12 @@ SMB2_sess_alloc_buffer(struct SMB2_sess_
 	else
 		req->SecurityMode = 0;
 
+#ifdef CONFIG_CIFS_DFS_UPCALL
+	req->Capabilities = cpu_to_le32(SMB2_GLOBAL_CAP_DFS);
+#else
 	req->Capabilities = 0;
+#endif /* DFS_UPCALL */
+
 	req->Channel = 0; /* MBZ */
 
 	sess_data->iov[0].iov_base = (char *)req;

[PATCH 4.9 039/103] mwifiex: fix 802.11n/WPA detection

[Greg Kroah-Hartman]

From: Brian Norris <briannorris@chromium.org>

commit df612421fe2566654047769c6852ffae1a31df16 upstream.

Commit 63d7ef36103d ("mwifiex: Don't abort on small, spec-compliant
vendor IEs") adjusted the ieee_types_vendor_header struct, which
inadvertently messed up the offsets used in
mwifiex_is_wpa_oui_present(). Add that offset back in, mirroring
mwifiex_is_rsn_oui_present().

As it stands, commit 63d7ef36103d breaks compatibility with WPA (not
WPA2) 802.11n networks, since we hit the "info: Disable 11n if AES is
not supported by AP" case in mwifiex_is_network_compatible().

Fixes: 63d7ef36103d ("mwifiex: Don't abort on small, spec-compliant vendor IEs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/marvell/mwifiex/main.h |    1 +
 drivers/net/wireless/marvell/mwifiex/scan.c |    3 ++-
 2 files changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/marvell/mwifiex/main.h
+++ b/drivers/net/wireless/marvell/mwifiex/main.h
@@ -120,6 +120,7 @@ enum {
 
 #define MWIFIEX_MAX_TOTAL_SCAN_TIME	(MWIFIEX_TIMER_10S - MWIFIEX_TIMER_1S)
 
+#define WPA_GTK_OUI_OFFSET				2
 #define RSN_GTK_OUI_OFFSET				2
 
 #define MWIFIEX_OUI_NOT_PRESENT			0
--- a/drivers/net/wireless/marvell/mwifiex/scan.c
+++ b/drivers/net/wireless/marvell/mwifiex/scan.c
@@ -181,7 +181,8 @@ mwifiex_is_wpa_oui_present(struct mwifie
 	u8 ret = MWIFIEX_OUI_NOT_PRESENT;
 
 	if (has_vendor_hdr(bss_desc->bcn_wpa_ie, WLAN_EID_VENDOR_SPECIFIC)) {
-		iebody = (struct ie_body *) bss_desc->bcn_wpa_ie->data;
+		iebody = (struct ie_body *)((u8 *)bss_desc->bcn_wpa_ie->data +
+					    WPA_GTK_OUI_OFFSET);
 		oui = &mwifiex_wpa_oui[cipher][0];
 		ret = mwifiex_search_oui_in_ie(iebody, oui);
 		if (ret)

[PATCH 4.9 040/103] iwlwifi: dont unmap as page memory that was mapped as single

[Greg Kroah-Hartman]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

commit 87e7e25aee6b59fef740856f4e86d4b60496c9e1 upstream.

In order to remember how to unmap a memory (as single or
as page), we maintain a bit per Transmit Buffer (TBs) in
the meta data (structure iwl_cmd_meta).
We maintain a bitmap: 1 bit per TB.
If the TB is set, we will free the memory as a page.
This bitmap was never cleared. Fix this.

Cc: stable@vger.kernel.org
Fixes: 3cd1980b0cdf ("iwlwifi: pcie: introduce new tfd and tb formats")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/intel/iwlwifi/pcie/tx.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c
@@ -439,6 +439,8 @@ static void iwl_pcie_tfd_unmap(struct iw
 					 DMA_TO_DEVICE);
 	}
 
+	meta->tbs = 0;
+
 	if (trans->cfg->use_tfh) {
 		struct iwl_tfh_tfd *tfd_fh = (void *)tfd;
 

[PATCH 4.9 041/103] scsi: mpt3sas: Use 63-bit DMA addressing on SAS35 HBA

[Greg Kroah-Hartman]

From: Suganath Prabu <suganath-prabu.subramani@broadcom.com>

commit df9a606184bfdb5ae3ca9d226184e9489f5c24f7 upstream.

Although SAS3 & SAS3.5 IT HBA controllers support 64-bit DMA addressing, as
per hardware design, if DMA-able range contains all 64-bits
set (0xFFFFFFFF-FFFFFFFF) then it results in a firmware fault.

E.g. SGE's start address is 0xFFFFFFFF-FFFF000 and data length is 0x1000
bytes. when HBA tries to DMA the data at 0xFFFFFFFF-FFFFFFFF location then
HBA will fault the firmware.

Driver will set 63-bit DMA mask to ensure the above address will not be
used.

Cc: <stable@vger.kernel.org> # 5.1.20+
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/scsi/mpt3sas/mpt3sas_base.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -1707,9 +1707,11 @@ _base_config_dma_addressing(struct MPT3S
 {
 	struct sysinfo s;
 	u64 consistent_dma_mask;
+	/* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */
+	int dma_mask = (ioc->hba_mpi_version_belonged > MPI2_VERSION) ? 63 : 64;
 
 	if (ioc->dma_mask)
-		consistent_dma_mask = DMA_BIT_MASK(64);
+		consistent_dma_mask = DMA_BIT_MASK(dma_mask);
 	else
 		consistent_dma_mask = DMA_BIT_MASK(32);
 
@@ -1717,11 +1719,11 @@ _base_config_dma_addressing(struct MPT3S
 		const uint64_t required_mask =
 		    dma_get_required_mask(&pdev->dev);
 		if ((required_mask > DMA_BIT_MASK(32)) &&
-		    !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
+		    !pci_set_dma_mask(pdev, DMA_BIT_MASK(dma_mask)) &&
 		    !pci_set_consistent_dma_mask(pdev, consistent_dma_mask)) {
 			ioc->base_add_sg_single = &_base_add_sg_single_64;
 			ioc->sge_size = sizeof(Mpi2SGESimple64_t);
-			ioc->dma_mask = 64;
+			ioc->dma_mask = dma_mask;
 			goto out;
 		}
 	}
@@ -1747,7 +1749,7 @@ static int
 _base_change_consistent_dma_mask(struct MPT3SAS_ADAPTER *ioc,
 				      struct pci_dev *pdev)
 {
-	if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
+	if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(ioc->dma_mask))) {
 		if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
 			return -ENODEV;
 	}
@@ -3381,7 +3383,7 @@ _base_allocate_memory_pools(struct MPT3S
 		total_sz += sz;
 	} while (ioc->rdpq_array_enable && (++i < ioc->reply_queue_count));
 
-	if (ioc->dma_mask == 64) {
+	if (ioc->dma_mask > 32) {
 		if (_base_change_consistent_dma_mask(ioc, ioc->pdev) != 0) {
 			pr_warn(MPT3SAS_FMT
 			    "no suitable consistent DMA mask for %s\n",

[PATCH 4.9 042/103] sh: kernel: hw_breakpoint: Fix missing break in switch statement

[Greg Kroah-Hartman]

From: Gustavo A. R. Silva <gustavo@embeddedor.com>

commit 1ee1119d184bb06af921b48c3021d921bbd85bac upstream.

Add missing break statement in order to prevent the code from falling
through to case SH_BREAKPOINT_WRITE.

Fixes: 09a072947791 ("sh: hw-breakpoints: Add preliminary support for SH-4A UBC.")
Cc: stable@vger.kernel.org
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/sh/kernel/hw_breakpoint.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/sh/kernel/hw_breakpoint.c
+++ b/arch/sh/kernel/hw_breakpoint.c
@@ -160,6 +160,7 @@ int arch_bp_generic_fields(int sh_len, i
 	switch (sh_type) {
 	case SH_BREAKPOINT_READ:
 		*gen_type = HW_BREAKPOINT_R;
+		break;
 	case SH_BREAKPOINT_WRITE:
 		*gen_type = HW_BREAKPOINT_W;
 		break;

[PATCH 4.9 043/103] mm/usercopy: use memory range to be accessed for wraparound check

[Greg Kroah-Hartman]

From: Isaac J. Manjarres <isaacm@codeaurora.org>

commit 951531691c4bcaa59f56a316e018bc2ff1ddf855 upstream.

Currently, when checking to see if accessing n bytes starting at address
"ptr" will cause a wraparound in the memory addresses, the check in
check_bogus_address() adds an extra byte, which is incorrect, as the
range of addresses that will be accessed is [ptr, ptr + (n - 1)].

This can lead to incorrectly detecting a wraparound in the memory
address, when trying to read 4 KB from memory that is mapped to the the
last possible page in the virtual address space, when in fact, accessing
that range of memory would not cause a wraparound to occur.

Use the memory range that will actually be accessed when considering if
accessing a certain amount of bytes will cause the memory address to
wrap around.

Link: http://lkml.kernel.org/r/1564509253-23287-1-git-send-email-isaacm@codeaurora.org
Fixes: f5509cc18daa ("mm: Hardened usercopy")
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Co-developed-by: Prasad Sodagudi <psodagud@codeaurora.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Trilok Soni <tsoni@codeaurora.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[kees: backport to v4.9]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/usercopy.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/usercopy.c
+++ b/mm/usercopy.c
@@ -124,7 +124,7 @@ static inline const char *check_kernel_t
 static inline const char *check_bogus_address(const void *ptr, unsigned long n)
 {
 	/* Reject if object wraps past end of memory. */
-	if ((unsigned long)ptr + n < (unsigned long)ptr)
+	if ((unsigned long)ptr + (n - 1) < (unsigned long)ptr)
 		return "<wrapped address>";
 
 	/* Reject if NULL or ZERO-allocation. */

[PATCH 4.9 044/103] mm/memcontrol.c: fix use after free in mem_cgroup_iter()

[Greg Kroah-Hartman]

From: Miles Chen <miles.chen@mediatek.com>

commit 54a83d6bcbf8f4700013766b974bf9190d40b689 upstream.

This patch is sent to report an use after free in mem_cgroup_iter()
after merging commit be2657752e9e ("mm: memcg: fix use after free in
mem_cgroup_iter()").

I work with android kernel tree (4.9 & 4.14), and commit be2657752e9e
("mm: memcg: fix use after free in mem_cgroup_iter()") has been merged
to the trees.  However, I can still observe use after free issues
addressed in the commit be2657752e9e.  (on low-end devices, a few times
this month)

backtrace:
        css_tryget <- crash here
        mem_cgroup_iter
        shrink_node
        shrink_zones
        do_try_to_free_pages
        try_to_free_pages
        __perform_reclaim
        __alloc_pages_direct_reclaim
        __alloc_pages_slowpath
        __alloc_pages_nodemask

To debug, I poisoned mem_cgroup before freeing it:

  static void __mem_cgroup_free(struct mem_cgroup *memcg)
        for_each_node(node)
        free_mem_cgroup_per_node_info(memcg, node);
        free_percpu(memcg->stat);
  +     /* poison memcg before freeing it */
  +     memset(memcg, 0x78, sizeof(struct mem_cgroup));
        kfree(memcg);
  }

The coredump shows the position=0xdbbc2a00 is freed.

  (gdb) p/x ((struct mem_cgroup_per_node *)0xe5009e00)->iter[8]
  $13 = {position = 0xdbbc2a00, generation = 0x2efd}

  0xdbbc2a00:     0xdbbc2e00      0x00000000      0xdbbc2800      0x00000100
  0xdbbc2a10:     0x00000200      0x78787878      0x00026218      0x00000000
  0xdbbc2a20:     0xdcad6000      0x00000001      0x78787800      0x00000000
  0xdbbc2a30:     0x78780000      0x00000000      0x0068fb84      0x78787878
  0xdbbc2a40:     0x78787878      0x78787878      0x78787878      0xe3fa5cc0
  0xdbbc2a50:     0x78787878      0x78787878      0x00000000      0x00000000
  0xdbbc2a60:     0x00000000      0x00000000      0x00000000      0x00000000
  0xdbbc2a70:     0x00000000      0x00000000      0x00000000      0x00000000
  0xdbbc2a80:     0x00000000      0x00000000      0x00000000      0x00000000
  0xdbbc2a90:     0x00000001      0x00000000      0x00000000      0x00100000
  0xdbbc2aa0:     0x00000001      0xdbbc2ac8      0x00000000      0x00000000
  0xdbbc2ab0:     0x00000000      0x00000000      0x00000000      0x00000000
  0xdbbc2ac0:     0x00000000      0x00000000      0xe5b02618      0x00001000
  0xdbbc2ad0:     0x00000000      0x78787878      0x78787878      0x78787878
  0xdbbc2ae0:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2af0:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2b00:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2b10:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2b20:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2b30:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2b40:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2b50:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2b60:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2b70:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2b80:     0x78787878      0x78787878      0x00000000      0x78787878
  0xdbbc2b90:     0x78787878      0x78787878      0x78787878      0x78787878
  0xdbbc2ba0:     0x78787878      0x78787878      0x78787878      0x78787878

In the reclaim path, try_to_free_pages() does not setup
sc.target_mem_cgroup and sc is passed to do_try_to_free_pages(), ...,
shrink_node().

In mem_cgroup_iter(), root is set to root_mem_cgroup because
sc->target_mem_cgroup is NULL.  It is possible to assign a memcg to
root_mem_cgroup.nodeinfo.iter in mem_cgroup_iter().

        try_to_free_pages
        	struct scan_control sc = {...}, target_mem_cgroup is 0x0;
        do_try_to_free_pages
        shrink_zones
        shrink_node
        	 mem_cgroup *root = sc->target_mem_cgroup;
        	 memcg = mem_cgroup_iter(root, NULL, &reclaim);
        mem_cgroup_iter()
        	if (!root)
        		root = root_mem_cgroup;
        	...

        	css = css_next_descendant_pre(css, &root->css);
        	memcg = mem_cgroup_from_css(css);
        	cmpxchg(&iter->position, pos, memcg);

My device uses memcg non-hierarchical mode.  When we release a memcg:
invalidate_reclaim_iterators() reaches only dead_memcg and its parents.
If non-hierarchical mode is used, invalidate_reclaim_iterators() never
reaches root_mem_cgroup.

  static void invalidate_reclaim_iterators(struct mem_cgroup *dead_memcg)
  {
        struct mem_cgroup *memcg = dead_memcg;

        for (; memcg; memcg = parent_mem_cgroup(memcg)
        ...
  }

So the use after free scenario looks like:

  CPU1						CPU2

  try_to_free_pages
  do_try_to_free_pages
  shrink_zones
  shrink_node
  mem_cgroup_iter()
      if (!root)
      	root = root_mem_cgroup;
      ...
      css = css_next_descendant_pre(css, &root->css);
      memcg = mem_cgroup_from_css(css);
      cmpxchg(&iter->position, pos, memcg);

        				invalidate_reclaim_iterators(memcg);
        				...
        				__mem_cgroup_free()
        					kfree(memcg);

  try_to_free_pages
  do_try_to_free_pages
  shrink_zones
  shrink_node
  mem_cgroup_iter()
      if (!root)
      	root = root_mem_cgroup;
      ...
      mz = mem_cgroup_nodeinfo(root, reclaim->pgdat->node_id);
      iter = &mz->iter[reclaim->priority];
      pos = READ_ONCE(iter->position);
      css_tryget(&pos->css) <- use after free

To avoid this, we should also invalidate root_mem_cgroup.nodeinfo.iter
in invalidate_reclaim_iterators().

[cai@lca.pw: fix -Wparentheses compilation warning]
  Link: http://lkml.kernel.org/r/1564580753-17531-1-git-send-email-cai@lca.pw
Link: http://lkml.kernel.org/r/20190730015729.4406-1-miles.chen@mediatek.com
Fixes: 5ac8fb31ad2e ("mm: memcontrol: convert reclaim iterator to simple css refcounting")
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 mm/memcontrol.c |   39 +++++++++++++++++++++++++++++----------
 1 file changed, 29 insertions(+), 10 deletions(-)

--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -887,26 +887,45 @@ void mem_cgroup_iter_break(struct mem_cg
 		css_put(&prev->css);
 }
 
-static void invalidate_reclaim_iterators(struct mem_cgroup *dead_memcg)
+static void __invalidate_reclaim_iterators(struct mem_cgroup *from,
+					struct mem_cgroup *dead_memcg)
 {
-	struct mem_cgroup *memcg = dead_memcg;
 	struct mem_cgroup_reclaim_iter *iter;
 	struct mem_cgroup_per_node *mz;
 	int nid;
 	int i;
 
-	for (; memcg; memcg = parent_mem_cgroup(memcg)) {
-		for_each_node(nid) {
-			mz = mem_cgroup_nodeinfo(memcg, nid);
-			for (i = 0; i <= DEF_PRIORITY; i++) {
-				iter = &mz->iter[i];
-				cmpxchg(&iter->position,
-					dead_memcg, NULL);
-			}
+	for_each_node(nid) {
+		mz = mem_cgroup_nodeinfo(from, nid);
+		for (i = 0; i <= DEF_PRIORITY; i++) {
+			iter = &mz->iter[i];
+			cmpxchg(&iter->position,
+				dead_memcg, NULL);
 		}
 	}
 }
 
+static void invalidate_reclaim_iterators(struct mem_cgroup *dead_memcg)
+{
+	struct mem_cgroup *memcg = dead_memcg;
+	struct mem_cgroup *last;
+
+	do {
+		__invalidate_reclaim_iterators(memcg, dead_memcg);
+		last = memcg;
+	} while ((memcg = parent_mem_cgroup(memcg)));
+
+	/*
+	 * When cgruop1 non-hierarchy mode is used,
+	 * parent_mem_cgroup() does not walk all the way up to the
+	 * cgroup root (root_mem_cgroup). So we have to handle
+	 * dead_memcg from cgroup root separately.
+	 */
+	if (last != root_mem_cgroup)
+		__invalidate_reclaim_iterators(root_mem_cgroup,
+						dead_memcg);
+}
+
 /*
  * Iteration constructs for visiting all cgroups (under a tree).  If
  * loops are exited prematurely (break), mem_cgroup_iter_break() must

[PATCH 4.9 045/103] bpf: get rid of pure_initcall dependency to enable jits

[Greg Kroah-Hartman]

From: Daniel Borkmann <daniel@iogearbox.net>

commit fa9dd599b4dae841924b022768354cfde9affecb upstream.

Having a pure_initcall() callback just to permanently enable BPF
JITs under CONFIG_BPF_JIT_ALWAYS_ON is unnecessary and could leave
a small race window in future where JIT is still disabled on boot.
Since we know about the setting at compilation time anyway, just
initialize it properly there. Also consolidate all the individual
bpf_jit_enable variables into a single one and move them under one
location. Moreover, don't allow for setting unspecified garbage
values on them.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[bwh: Backported to 4.9 as dependency of commit 2e4a30983b0f
 "bpf: restrict access to core bpf sysctls":
 - Drop change in arch/mips/net/ebpf_jit.c
 - Drop change to bpf_jit_kallsyms
 - Adjust filenames, context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/net/bpf_jit_32.c         |    2 --
 arch/arm64/net/bpf_jit_comp.c     |    2 --
 arch/mips/net/bpf_jit.c           |    2 --
 arch/powerpc/net/bpf_jit_comp.c   |    2 --
 arch/powerpc/net/bpf_jit_comp64.c |    2 --
 arch/s390/net/bpf_jit_comp.c      |    2 --
 arch/sparc/net/bpf_jit_comp.c     |    2 --
 arch/x86/net/bpf_jit_comp.c       |    2 --
 kernel/bpf/core.c                 |   15 +++++++++++----
 net/core/sysctl_net_core.c        |   14 +++++++++-----
 net/socket.c                      |    9 ---------
 11 files changed, 20 insertions(+), 34 deletions(-)

--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -72,8 +72,6 @@ struct jit_ctx {
 #endif
 };
 
-int bpf_jit_enable __read_mostly;
-
 static inline int call_neg_helper(struct sk_buff *skb, int offset, void *ret,
 		      unsigned int size)
 {
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -30,8 +30,6 @@
 
 #include "bpf_jit.h"
 
-int bpf_jit_enable __read_mostly;
-
 #define TMP_REG_1 (MAX_BPF_JIT_REG + 0)
 #define TMP_REG_2 (MAX_BPF_JIT_REG + 1)
 #define TCALL_CNT (MAX_BPF_JIT_REG + 2)
--- a/arch/mips/net/bpf_jit.c
+++ b/arch/mips/net/bpf_jit.c
@@ -1194,8 +1194,6 @@ jmp_cmp:
 	return 0;
 }
 
-int bpf_jit_enable __read_mostly;
-
 void bpf_jit_compile(struct bpf_prog *fp)
 {
 	struct jit_ctx ctx;
--- a/arch/powerpc/net/bpf_jit_comp.c
+++ b/arch/powerpc/net/bpf_jit_comp.c
@@ -18,8 +18,6 @@
 
 #include "bpf_jit32.h"
 
-int bpf_jit_enable __read_mostly;
-
 static inline void bpf_flush_icache(void *start, void *end)
 {
 	smp_wmb();
--- a/arch/powerpc/net/bpf_jit_comp64.c
+++ b/arch/powerpc/net/bpf_jit_comp64.c
@@ -21,8 +21,6 @@
 
 #include "bpf_jit64.h"
 
-int bpf_jit_enable __read_mostly;
-
 static void bpf_jit_fill_ill_insns(void *area, unsigned int size)
 {
 	int *p = area;
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -28,8 +28,6 @@
 #include <asm/nospec-branch.h>
 #include "bpf_jit.h"
 
-int bpf_jit_enable __read_mostly;
-
 struct bpf_jit {
 	u32 seen;		/* Flags to remember seen eBPF instructions */
 	u32 seen_reg[16];	/* Array to remember which registers are used */
--- a/arch/sparc/net/bpf_jit_comp.c
+++ b/arch/sparc/net/bpf_jit_comp.c
@@ -10,8 +10,6 @@
 
 #include "bpf_jit.h"
 
-int bpf_jit_enable __read_mostly;
-
 static inline bool is_simm13(unsigned int value)
 {
 	return value + 0x1000 < 0x2000;
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -15,8 +15,6 @@
 #include <asm/nospec-branch.h>
 #include <linux/bpf.h>
 
-int bpf_jit_enable __read_mostly;
-
 /*
  * assembly code in arch/x86/net/bpf_jit.S
  */
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -208,6 +208,10 @@ struct bpf_prog *bpf_patch_insn_single(s
 }
 
 #ifdef CONFIG_BPF_JIT
+/* All BPF JIT sysctl knobs here. */
+int bpf_jit_enable   __read_mostly = IS_BUILTIN(CONFIG_BPF_JIT_ALWAYS_ON);
+int bpf_jit_harden   __read_mostly;
+
 struct bpf_binary_header *
 bpf_jit_binary_alloc(unsigned int proglen, u8 **image_ptr,
 		     unsigned int alignment,
@@ -244,8 +248,6 @@ void bpf_jit_binary_free(struct bpf_bina
 	module_memfree(hdr);
 }
 
-int bpf_jit_harden __read_mostly;
-
 static int bpf_jit_blind_insn(const struct bpf_insn *from,
 			      const struct bpf_insn *aux,
 			      struct bpf_insn *to_buff)
@@ -925,8 +927,13 @@ load_byte:
 STACK_FRAME_NON_STANDARD(__bpf_prog_run); /* jump table */
 
 #else
-static unsigned int __bpf_prog_ret0(void *ctx, const struct bpf_insn *insn)
+static unsigned int __bpf_prog_ret0_warn(void *ctx,
+					 const struct bpf_insn *insn)
 {
+	/* If this handler ever gets executed, then BPF_JIT_ALWAYS_ON
+	 * is not working properly, so warn about it!
+	 */
+	WARN_ON_ONCE(1);
 	return 0;
 }
 #endif
@@ -981,7 +988,7 @@ struct bpf_prog *bpf_prog_select_runtime
 #ifndef CONFIG_BPF_JIT_ALWAYS_ON
 	fp->bpf_func = (void *) __bpf_prog_run;
 #else
-	fp->bpf_func = (void *) __bpf_prog_ret0;
+	fp->bpf_func = (void *) __bpf_prog_ret0_warn;
 #endif
 
 	/* eBPF JITs can rewrite the program in case constant
--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -24,6 +24,7 @@
 
 static int zero = 0;
 static int one = 1;
+static int two __maybe_unused = 2;
 static int min_sndbuf = SOCK_MIN_SNDBUF;
 static int min_rcvbuf = SOCK_MIN_RCVBUF;
 static int max_skb_frags = MAX_SKB_FRAGS;
@@ -292,13 +293,14 @@ static struct ctl_table net_core_table[]
 		.data		= &bpf_jit_enable,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-#ifndef CONFIG_BPF_JIT_ALWAYS_ON
-		.proc_handler	= proc_dointvec
-#else
 		.proc_handler	= proc_dointvec_minmax,
+# ifdef CONFIG_BPF_JIT_ALWAYS_ON
 		.extra1		= &one,
 		.extra2		= &one,
-#endif
+# else
+		.extra1		= &zero,
+		.extra2		= &two,
+# endif
 	},
 # ifdef CONFIG_HAVE_EBPF_JIT
 	{
@@ -306,7 +308,9 @@ static struct ctl_table net_core_table[]
 		.data		= &bpf_jit_harden,
 		.maxlen		= sizeof(int),
 		.mode		= 0600,
-		.proc_handler	= proc_dointvec,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &zero,
+		.extra2		= &two,
 	},
 # endif
 #endif
--- a/net/socket.c
+++ b/net/socket.c
@@ -2550,15 +2550,6 @@ out_fs:
 
 core_initcall(sock_init);	/* early initcall */
 
-static int __init jit_init(void)
-{
-#ifdef CONFIG_BPF_JIT_ALWAYS_ON
-	bpf_jit_enable = 1;
-#endif
-	return 0;
-}
-pure_initcall(jit_init);
-
 #ifdef CONFIG_PROC_FS
 void socket_seq_show(struct seq_file *seq)
 {

[PATCH 4.9 046/103] bpf: restrict access to core bpf sysctls

[Greg Kroah-Hartman]

From: Daniel Borkmann <daniel@iogearbox.net>

commit 2e4a30983b0f9b19b59e38bbf7427d7fdd480d98 upstream.

Given BPF reaches far beyond just networking these days, it was
never intended to allow setting and in some cases reading those
knobs out of a user namespace root running without CAP_SYS_ADMIN,
thus tighten such access.

Also the bpf_jit_enable = 2 debugging mode should only be allowed
if kptr_restrict is not set since it otherwise can leak addresses
to the kernel log. Dump a note to the kernel log that this is for
debugging JITs only when enabled.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[bwh: Backported to 4.9:
 - We don't have bpf_dump_raw_ok(), so drop the condition based on it. This
   condition only made it a bit harder for a privileged user to do something
   silly.
 - Drop change to bpf_jit_kallsyms]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/sysctl_net_core.c |   39 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)

--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -232,6 +232,41 @@ static int proc_do_rss_key(struct ctl_ta
 	return proc_dostring(&fake_table, write, buffer, lenp, ppos);
 }
 
+#ifdef CONFIG_BPF_JIT
+static int proc_dointvec_minmax_bpf_enable(struct ctl_table *table, int write,
+					   void __user *buffer, size_t *lenp,
+					   loff_t *ppos)
+{
+	int ret, jit_enable = *(int *)table->data;
+	struct ctl_table tmp = *table;
+
+	if (write && !capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	tmp.data = &jit_enable;
+	ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos);
+	if (write && !ret) {
+		*(int *)table->data = jit_enable;
+		if (jit_enable == 2)
+			pr_warn("bpf_jit_enable = 2 was set! NEVER use this in production, only for JIT debugging!\n");
+	}
+	return ret;
+}
+
+# ifdef CONFIG_HAVE_EBPF_JIT
+static int
+proc_dointvec_minmax_bpf_restricted(struct ctl_table *table, int write,
+				    void __user *buffer, size_t *lenp,
+				    loff_t *ppos)
+{
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	return proc_dointvec_minmax(table, write, buffer, lenp, ppos);
+}
+# endif
+#endif
+
 static struct ctl_table net_core_table[] = {
 #ifdef CONFIG_NET
 	{
@@ -293,7 +328,7 @@ static struct ctl_table net_core_table[]
 		.data		= &bpf_jit_enable,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
+		.proc_handler	= proc_dointvec_minmax_bpf_enable,
 # ifdef CONFIG_BPF_JIT_ALWAYS_ON
 		.extra1		= &one,
 		.extra2		= &one,
@@ -308,7 +343,7 @@ static struct ctl_table net_core_table[]
 		.data		= &bpf_jit_harden,
 		.maxlen		= sizeof(int),
 		.mode		= 0600,
-		.proc_handler	= proc_dointvec_minmax,
+		.proc_handler	= proc_dointvec_minmax_bpf_restricted,
 		.extra1		= &zero,
 		.extra2		= &two,
 	},

[PATCH 4.9 047/103] bpf: add bpf_jit_limit knob to restrict unpriv allocations

[Greg Kroah-Hartman]

From: Daniel Borkmann <daniel@iogearbox.net>

commit ede95a63b5e84ddeea6b0c473b36ab8bfd8c6ce3 upstream.

Rick reported that the BPF JIT could potentially fill the entire module
space with BPF programs from unprivileged users which would prevent later
attempts to load normal kernel modules or privileged BPF programs, for
example. If JIT was enabled but unsuccessful to generate the image, then
before commit 290af86629b2 ("bpf: introduce BPF_JIT_ALWAYS_ON config")
we would always fall back to the BPF interpreter. Nowadays in the case
where the CONFIG_BPF_JIT_ALWAYS_ON could be set, then the load will abort
with a failure since the BPF interpreter was compiled out.

Add a global limit and enforce it for unprivileged users such that in case
of BPF interpreter compiled out we fail once the limit has been reached
or we fall back to BPF interpreter earlier w/o using module mem if latter
was compiled in. In a next step, fair share among unprivileged users can
be resolved in particular for the case where we would fail hard once limit
is reached.

Fixes: 290af86629b2 ("bpf: introduce BPF_JIT_ALWAYS_ON config")
Fixes: 0a14842f5a3c ("net: filter: Just In Time compiler for x86-64")
Co-Developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[bwh: Backported to 4.9: adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/sysctl/net.txt |    8 +++++++
 include/linux/filter.h       |    1 
 kernel/bpf/core.c            |   49 ++++++++++++++++++++++++++++++++++++++++---
 net/core/sysctl_net_core.c   |   10 +++++++-
 4 files changed, 63 insertions(+), 5 deletions(-)

--- a/Documentation/sysctl/net.txt
+++ b/Documentation/sysctl/net.txt
@@ -54,6 +54,14 @@ Values :
 	1 - enable JIT hardening for unprivileged users only
 	2 - enable JIT hardening for all users
 
+bpf_jit_limit
+-------------
+
+This enforces a global limit for memory allocations to the BPF JIT
+compiler in order to reject unprivileged JIT requests once it has
+been surpassed. bpf_jit_limit contains the value of the global limit
+in bytes.
+
 dev_weight
 --------------
 
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -599,6 +599,7 @@ void bpf_warn_invalid_xdp_action(u32 act
 #ifdef CONFIG_BPF_JIT
 extern int bpf_jit_enable;
 extern int bpf_jit_harden;
+extern int bpf_jit_limit;
 
 typedef void (*bpf_jit_fill_hole_t)(void *area, unsigned int size);
 
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -208,9 +208,43 @@ struct bpf_prog *bpf_patch_insn_single(s
 }
 
 #ifdef CONFIG_BPF_JIT
+# define BPF_JIT_LIMIT_DEFAULT	(PAGE_SIZE * 40000)
+
 /* All BPF JIT sysctl knobs here. */
 int bpf_jit_enable   __read_mostly = IS_BUILTIN(CONFIG_BPF_JIT_ALWAYS_ON);
 int bpf_jit_harden   __read_mostly;
+int bpf_jit_limit    __read_mostly = BPF_JIT_LIMIT_DEFAULT;
+
+static atomic_long_t bpf_jit_current;
+
+#if defined(MODULES_VADDR)
+static int __init bpf_jit_charge_init(void)
+{
+	/* Only used as heuristic here to derive limit. */
+	bpf_jit_limit = min_t(u64, round_up((MODULES_END - MODULES_VADDR) >> 2,
+					    PAGE_SIZE), INT_MAX);
+	return 0;
+}
+pure_initcall(bpf_jit_charge_init);
+#endif
+
+static int bpf_jit_charge_modmem(u32 pages)
+{
+	if (atomic_long_add_return(pages, &bpf_jit_current) >
+	    (bpf_jit_limit >> PAGE_SHIFT)) {
+		if (!capable(CAP_SYS_ADMIN)) {
+			atomic_long_sub(pages, &bpf_jit_current);
+			return -EPERM;
+		}
+	}
+
+	return 0;
+}
+
+static void bpf_jit_uncharge_modmem(u32 pages)
+{
+	atomic_long_sub(pages, &bpf_jit_current);
+}
 
 struct bpf_binary_header *
 bpf_jit_binary_alloc(unsigned int proglen, u8 **image_ptr,
@@ -218,21 +252,27 @@ bpf_jit_binary_alloc(unsigned int progle
 		     bpf_jit_fill_hole_t bpf_fill_ill_insns)
 {
 	struct bpf_binary_header *hdr;
-	unsigned int size, hole, start;
+	u32 size, hole, start, pages;
 
 	/* Most of BPF filters are really small, but if some of them
 	 * fill a page, allow at least 128 extra bytes to insert a
 	 * random section of illegal instructions.
 	 */
 	size = round_up(proglen + sizeof(*hdr) + 128, PAGE_SIZE);
+	pages = size / PAGE_SIZE;
+
+	if (bpf_jit_charge_modmem(pages))
+		return NULL;
 	hdr = module_alloc(size);
-	if (hdr == NULL)
+	if (!hdr) {
+		bpf_jit_uncharge_modmem(pages);
 		return NULL;
+	}
 
 	/* Fill space with illegal/arch-dep instructions. */
 	bpf_fill_ill_insns(hdr, size);
 
-	hdr->pages = size / PAGE_SIZE;
+	hdr->pages = pages;
 	hole = min_t(unsigned int, size - (proglen + sizeof(*hdr)),
 		     PAGE_SIZE - sizeof(*hdr));
 	start = (get_random_int() % hole) & ~(alignment - 1);
@@ -245,7 +285,10 @@ bpf_jit_binary_alloc(unsigned int progle
 
 void bpf_jit_binary_free(struct bpf_binary_header *hdr)
 {
+	u32 pages = hdr->pages;
+
 	module_memfree(hdr);
+	bpf_jit_uncharge_modmem(pages);
 }
 
 static int bpf_jit_blind_insn(const struct bpf_insn *from,
--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -253,7 +253,6 @@ static int proc_dointvec_minmax_bpf_enab
 	return ret;
 }
 
-# ifdef CONFIG_HAVE_EBPF_JIT
 static int
 proc_dointvec_minmax_bpf_restricted(struct ctl_table *table, int write,
 				    void __user *buffer, size_t *lenp,
@@ -264,7 +263,6 @@ proc_dointvec_minmax_bpf_restricted(stru
 
 	return proc_dointvec_minmax(table, write, buffer, lenp, ppos);
 }
-# endif
 #endif
 
 static struct ctl_table net_core_table[] = {
@@ -348,6 +346,14 @@ static struct ctl_table net_core_table[]
 		.extra2		= &two,
 	},
 # endif
+	{
+		.procname	= "bpf_jit_limit",
+		.data		= &bpf_jit_limit,
+		.maxlen		= sizeof(int),
+		.mode		= 0600,
+		.proc_handler	= proc_dointvec_minmax_bpf_restricted,
+		.extra1		= &one,
+	},
 #endif
 	{
 		.procname	= "netdev_tstamp_prequeue",

[PATCH 4.9 048/103] vhost-net: set packet weight of tx polling to 2 * vq size

[Greg Kroah-Hartman]

From: haibinzhang(张海斌) <haibinzhang@tencent.com>

commit a2ac99905f1ea8b15997a6ec39af69aa28a3653b upstream.

handle_tx will delay rx for tens or even hundreds of milliseconds when tx busy
polling udp packets with small length(e.g. 1byte udp payload), because setting
VHOST_NET_WEIGHT takes into account only sent-bytes but no single packet length.

Ping-Latencies shown below were tested between two Virtual Machines using
netperf (UDP_STREAM, len=1), and then another machine pinged the client:

vq size=256
Packet-Weight   Ping-Latencies(millisecond)
                   min      avg       max
Origin           3.319   18.489    57.303
64               1.643    2.021     2.552
128              1.825    2.600     3.224
256              1.997    2.710     4.295
512              1.860    3.171     4.631
1024             2.002    4.173     9.056
2048             2.257    5.650     9.688
4096             2.093    8.508    15.943

vq size=512
Packet-Weight   Ping-Latencies(millisecond)
                   min      avg       max
Origin           6.537   29.177    66.245
64               2.798    3.614     4.403
128              2.861    3.820     4.775
256              3.008    4.018     4.807
512              3.254    4.523     5.824
1024             3.079    5.335     7.747
2048             3.944    8.201    12.762
4096             4.158   11.057    19.985

Seems pretty consistent, a small dip at 2 VQ sizes.
Ring size is a hint from device about a burst size it can tolerate. Based on
benchmarks, set the weight to 2 * vq size.

To evaluate this change, another tests were done using netperf(RR, TX) between
two machines with Intel(R) Xeon(R) Gold 6133 CPU @ 2.50GHz, and vq size was
tweaked through qemu. Results shown below does not show obvious changes.

vq size=256 TCP_RR                vq size=512 TCP_RR
size/sessions/+thu%/+normalize%   size/sessions/+thu%/+normalize%
   1/       1/  -7%/        -2%      1/       1/   0%/        -2%
   1/       4/  +1%/         0%      1/       4/  +1%/         0%
   1/       8/  +1%/        -2%      1/       8/   0%/        +1%
  64/       1/  -6%/         0%     64/       1/  +7%/        +3%
  64/       4/   0%/        +2%     64/       4/  -1%/        +1%
  64/       8/   0%/         0%     64/       8/  -1%/        -2%
 256/       1/  -3%/        -4%    256/       1/  -4%/        -2%
 256/       4/  +3%/        +4%    256/       4/  +1%/        +2%
 256/       8/  +2%/         0%    256/       8/  +1%/        -1%

vq size=256 UDP_RR                vq size=512 UDP_RR
size/sessions/+thu%/+normalize%   size/sessions/+thu%/+normalize%
   1/       1/  -5%/        +1%      1/       1/  -3%/        -2%
   1/       4/  +4%/        +1%      1/       4/  -2%/        +2%
   1/       8/  -1%/        -1%      1/       8/  -1%/         0%
  64/       1/  -2%/        -3%     64/       1/  +1%/        +1%
  64/       4/  -5%/        -1%     64/       4/  +2%/         0%
  64/       8/   0%/        -1%     64/       8/  -2%/        +1%
 256/       1/  +7%/        +1%    256/       1/  -7%/         0%
 256/       4/  +1%/        +1%    256/       4/  -3%/        -4%
 256/       8/  +2%/        +2%    256/       8/  +1%/        +1%

vq size=256 TCP_STREAM            vq size=512 TCP_STREAM
size/sessions/+thu%/+normalize%   size/sessions/+thu%/+normalize%
  64/       1/   0%/        -3%     64/       1/   0%/         0%
  64/       4/  +3%/        -1%     64/       4/  -2%/        +4%
  64/       8/  +9%/        -4%     64/       8/  -1%/        +2%
 256/       1/  +1%/        -4%    256/       1/  +1%/        +1%
 256/       4/  -1%/        -1%    256/       4/  -3%/         0%
 256/       8/  +7%/        +5%    256/       8/  -3%/         0%
 512/       1/  +1%/         0%    512/       1/  -1%/        -1%
 512/       4/  +1%/        -1%    512/       4/   0%/         0%
 512/       8/  +7%/        -5%    512/       8/  +6%/        -1%
1024/       1/   0%/        -1%   1024/       1/   0%/        +1%
1024/       4/  +3%/         0%   1024/       4/  +1%/         0%
1024/       8/  +8%/        +5%   1024/       8/  -1%/         0%
2048/       1/  +2%/        +2%   2048/       1/  -1%/         0%
2048/       4/  +1%/         0%   2048/       4/   0%/        -1%
2048/       8/  -2%/         0%   2048/       8/   5%/        -1%
4096/       1/  -2%/         0%   4096/       1/  -2%/         0%
4096/       4/  +2%/         0%   4096/       4/   0%/         0%
4096/       8/  +9%/        -2%   4096/       8/  -5%/        -1%

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Haibin Zhang <haibinzhang@tencent.com>
Signed-off-by: Yunfang Tai <yunfangtai@tencent.com>
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/vhost/net.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -39,6 +39,10 @@ MODULE_PARM_DESC(experimental_zcopytx, "
  * Using this limit prevents one virtqueue from starving others. */
 #define VHOST_NET_WEIGHT 0x80000
 
+/* Max number of packets transferred before requeueing the job.
+ * Using this limit prevents one virtqueue from starving rx. */
+#define VHOST_NET_PKT_WEIGHT(vq) ((vq)->num * 2)
+
 /* MAX number of TX used buffers for outstanding zerocopy */
 #define VHOST_MAX_PEND 128
 #define VHOST_GOODCOPY_LEN 256
@@ -372,6 +376,7 @@ static void handle_tx(struct vhost_net *
 	struct socket *sock;
 	struct vhost_net_ubuf_ref *uninitialized_var(ubufs);
 	bool zcopy, zcopy_used;
+	int sent_pkts = 0;
 
 	mutex_lock(&vq->mutex);
 	sock = vq->private_data;
@@ -474,7 +479,8 @@ static void handle_tx(struct vhost_net *
 			vhost_zerocopy_signal_used(net, vq);
 		total_len += len;
 		vhost_net_tx_packet(net);
-		if (unlikely(total_len >= VHOST_NET_WEIGHT)) {
+		if (unlikely(total_len >= VHOST_NET_WEIGHT) ||
+		    unlikely(++sent_pkts >= VHOST_NET_PKT_WEIGHT(vq))) {
 			vhost_poll_queue(&vq->poll);
 			break;
 		}

[PATCH 4.9 049/103] vhost_net: use packet weight for rx handler, too

[Greg Kroah-Hartman]

From: Paolo Abeni <pabeni@redhat.com>

commit db688c24eada63b1efe6d0d7d835e5c3bdd71fd3 upstream.

Similar to commit a2ac99905f1e ("vhost-net: set packet weight of
tx polling to 2 * vq size"), we need a packet-based limit for
handler_rx, too - elsewhere, under rx flood with small packets,
tx can be delayed for a very long time, even without busypolling.

The pkt limit applied to handle_rx must be the same applied by
handle_tx, or we will get unfair scheduling between rx and tx.
Tying such limit to the queue length makes it less effective for
large queue length values and can introduce large process
scheduler latencies, so a constant valued is used - likewise
the existing bytes limit.

The selected limit has been validated with PVP[1] performance
test with different queue sizes:

queue size		256	512	1024

baseline		366	354	362
weight 128		715	723	670
weight 256		740	745	733
weight 512		600	460	583
weight 1024		423	427	418

A packet weight of 256 gives peek performances in under all the
tested scenarios.

No measurable regression in unidirectional performance tests has
been detected.

[1] https://developers.redhat.com/blog/2017/06/05/measuring-and-comparing-open-vswitch-performance/

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/vhost/net.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -40,8 +40,10 @@ MODULE_PARM_DESC(experimental_zcopytx, "
 #define VHOST_NET_WEIGHT 0x80000
 
 /* Max number of packets transferred before requeueing the job.
- * Using this limit prevents one virtqueue from starving rx. */
-#define VHOST_NET_PKT_WEIGHT(vq) ((vq)->num * 2)
+ * Using this limit prevents one virtqueue from starving others with small
+ * pkts.
+ */
+#define VHOST_NET_PKT_WEIGHT 256
 
 /* MAX number of TX used buffers for outstanding zerocopy */
 #define VHOST_MAX_PEND 128
@@ -480,7 +482,7 @@ static void handle_tx(struct vhost_net *
 		total_len += len;
 		vhost_net_tx_packet(net);
 		if (unlikely(total_len >= VHOST_NET_WEIGHT) ||
-		    unlikely(++sent_pkts >= VHOST_NET_PKT_WEIGHT(vq))) {
+		    unlikely(++sent_pkts >= VHOST_NET_PKT_WEIGHT)) {
 			vhost_poll_queue(&vq->poll);
 			break;
 		}
@@ -662,6 +664,7 @@ static void handle_rx(struct vhost_net *
 	struct socket *sock;
 	struct iov_iter fixup;
 	__virtio16 num_buffers;
+	int recv_pkts = 0;
 
 	mutex_lock_nested(&vq->mutex, 0);
 	sock = vq->private_data;
@@ -760,7 +763,8 @@ static void handle_rx(struct vhost_net *
 			vhost_log_write(vq, vq_log, log, vhost_len,
 					vq->iov, in);
 		total_len += vhost_len;
-		if (unlikely(total_len >= VHOST_NET_WEIGHT)) {
+		if (unlikely(total_len >= VHOST_NET_WEIGHT) ||
+		    unlikely(++recv_pkts >= VHOST_NET_PKT_WEIGHT)) {
 			vhost_poll_queue(&vq->poll);
 			goto out;
 		}

[PATCH 4.9 050/103] vhost_net: introduce vhost_exceeds_weight()

[Greg Kroah-Hartman]

From: Jason Wang <jasowang@redhat.com>

commit 272f35cba53d088085e5952fd81d7a133ab90789 upstream.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 4.9: adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/vhost/net.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -357,6 +357,12 @@ static int vhost_net_tx_get_vq_desc(stru
 	return r;
 }
 
+static bool vhost_exceeds_weight(int pkts, int total_len)
+{
+	return total_len >= VHOST_NET_WEIGHT ||
+	       pkts >= VHOST_NET_PKT_WEIGHT;
+}
+
 /* Expects to be always run from workqueue - which acts as
  * read-size critical section for our kind of RCU. */
 static void handle_tx(struct vhost_net *net)
@@ -481,8 +487,7 @@ static void handle_tx(struct vhost_net *
 			vhost_zerocopy_signal_used(net, vq);
 		total_len += len;
 		vhost_net_tx_packet(net);
-		if (unlikely(total_len >= VHOST_NET_WEIGHT) ||
-		    unlikely(++sent_pkts >= VHOST_NET_PKT_WEIGHT)) {
+		if (unlikely(vhost_exceeds_weight(++sent_pkts, total_len))) {
 			vhost_poll_queue(&vq->poll);
 			break;
 		}
@@ -763,8 +768,7 @@ static void handle_rx(struct vhost_net *
 			vhost_log_write(vq, vq_log, log, vhost_len,
 					vq->iov, in);
 		total_len += vhost_len;
-		if (unlikely(total_len >= VHOST_NET_WEIGHT) ||
-		    unlikely(++recv_pkts >= VHOST_NET_PKT_WEIGHT)) {
+		if (unlikely(vhost_exceeds_weight(++recv_pkts, total_len))) {
 			vhost_poll_queue(&vq->poll);
 			goto out;
 		}

[PATCH 4.9 051/103] vhost: introduce vhost_exceeds_weight()

[Greg Kroah-Hartman]

From: Jason Wang <jasowang@redhat.com>

commit e82b9b0727ff6d665fff2d326162b460dded554d upstream.

We used to have vhost_exceeds_weight() for vhost-net to:

- prevent vhost kthread from hogging the cpu
- balance the time spent between TX and RX

This function could be useful for vsock and scsi as well. So move it
to vhost.c. Device must specify a weight which counts the number of
requests, or it can also specific a byte_weight which counts the
number of bytes that has been processed.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[bwh: Backported to 4.9:
 - In vhost_net, both Tx modes are handled in one loop in handle_tx()
 - Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/vhost/net.c   |   18 +++++-------------
 drivers/vhost/scsi.c  |    9 ++++++++-
 drivers/vhost/vhost.c |   20 +++++++++++++++++++-
 drivers/vhost/vhost.h |    6 +++++-
 drivers/vhost/vsock.c |   12 +++++++++++-
 5 files changed, 48 insertions(+), 17 deletions(-)

--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -357,12 +357,6 @@ static int vhost_net_tx_get_vq_desc(stru
 	return r;
 }
 
-static bool vhost_exceeds_weight(int pkts, int total_len)
-{
-	return total_len >= VHOST_NET_WEIGHT ||
-	       pkts >= VHOST_NET_PKT_WEIGHT;
-}
-
 /* Expects to be always run from workqueue - which acts as
  * read-size critical section for our kind of RCU. */
 static void handle_tx(struct vhost_net *net)
@@ -487,10 +481,9 @@ static void handle_tx(struct vhost_net *
 			vhost_zerocopy_signal_used(net, vq);
 		total_len += len;
 		vhost_net_tx_packet(net);
-		if (unlikely(vhost_exceeds_weight(++sent_pkts, total_len))) {
-			vhost_poll_queue(&vq->poll);
+		if (unlikely(vhost_exceeds_weight(vq, ++sent_pkts,
+						  total_len)))
 			break;
-		}
 	}
 out:
 	mutex_unlock(&vq->mutex);
@@ -768,10 +761,8 @@ static void handle_rx(struct vhost_net *
 			vhost_log_write(vq, vq_log, log, vhost_len,
 					vq->iov, in);
 		total_len += vhost_len;
-		if (unlikely(vhost_exceeds_weight(++recv_pkts, total_len))) {
-			vhost_poll_queue(&vq->poll);
+		if (unlikely(vhost_exceeds_weight(vq, ++recv_pkts, total_len)))
 			goto out;
-		}
 	}
 	vhost_net_enable_vq(net, vq);
 out:
@@ -842,7 +833,8 @@ static int vhost_net_open(struct inode *
 		n->vqs[i].vhost_hlen = 0;
 		n->vqs[i].sock_hlen = 0;
 	}
-	vhost_dev_init(dev, vqs, VHOST_NET_VQ_MAX);
+	vhost_dev_init(dev, vqs, VHOST_NET_VQ_MAX,
+		       VHOST_NET_WEIGHT, VHOST_NET_PKT_WEIGHT);
 
 	vhost_poll_init(n->poll + VHOST_NET_VQ_TX, handle_tx_net, POLLOUT, dev);
 	vhost_poll_init(n->poll + VHOST_NET_VQ_RX, handle_rx_net, POLLIN, dev);
--- a/drivers/vhost/scsi.c
+++ b/drivers/vhost/scsi.c
@@ -58,6 +58,12 @@
 #define VHOST_SCSI_PREALLOC_UPAGES 2048
 #define VHOST_SCSI_PREALLOC_PROT_SGLS 512
 
+/* Max number of requests before requeueing the job.
+ * Using this limit prevents one virtqueue from starving others with
+ * request.
+ */
+#define VHOST_SCSI_WEIGHT 256
+
 struct vhost_scsi_inflight {
 	/* Wait for the flush operation to finish */
 	struct completion comp;
@@ -1433,7 +1439,8 @@ static int vhost_scsi_open(struct inode
 		vqs[i] = &vs->vqs[i].vq;
 		vs->vqs[i].vq.handle_kick = vhost_scsi_handle_kick;
 	}
-	vhost_dev_init(&vs->dev, vqs, VHOST_SCSI_MAX_VQ);
+	vhost_dev_init(&vs->dev, vqs, VHOST_SCSI_MAX_VQ,
+		       VHOST_SCSI_WEIGHT, 0);
 
 	vhost_scsi_init_inflight(vs, NULL);
 
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -393,8 +393,24 @@ static void vhost_dev_free_iovecs(struct
 		vhost_vq_free_iovecs(dev->vqs[i]);
 }
 
+bool vhost_exceeds_weight(struct vhost_virtqueue *vq,
+			  int pkts, int total_len)
+{
+	struct vhost_dev *dev = vq->dev;
+
+	if ((dev->byte_weight && total_len >= dev->byte_weight) ||
+	    pkts >= dev->weight) {
+		vhost_poll_queue(&vq->poll);
+		return true;
+	}
+
+	return false;
+}
+EXPORT_SYMBOL_GPL(vhost_exceeds_weight);
+
 void vhost_dev_init(struct vhost_dev *dev,
-		    struct vhost_virtqueue **vqs, int nvqs)
+		    struct vhost_virtqueue **vqs, int nvqs,
+		    int weight, int byte_weight)
 {
 	struct vhost_virtqueue *vq;
 	int i;
@@ -408,6 +424,8 @@ void vhost_dev_init(struct vhost_dev *de
 	dev->iotlb = NULL;
 	dev->mm = NULL;
 	dev->worker = NULL;
+	dev->weight = weight;
+	dev->byte_weight = byte_weight;
 	init_llist_head(&dev->work_list);
 	init_waitqueue_head(&dev->wait);
 	INIT_LIST_HEAD(&dev->read_list);
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -164,9 +164,13 @@ struct vhost_dev {
 	struct list_head read_list;
 	struct list_head pending_list;
 	wait_queue_head_t wait;
+	int weight;
+	int byte_weight;
 };
 
-void vhost_dev_init(struct vhost_dev *, struct vhost_virtqueue **vqs, int nvqs);
+bool vhost_exceeds_weight(struct vhost_virtqueue *vq, int pkts, int total_len);
+void vhost_dev_init(struct vhost_dev *, struct vhost_virtqueue **vqs,
+		    int nvqs, int weight, int byte_weight);
 long vhost_dev_set_owner(struct vhost_dev *dev);
 bool vhost_dev_has_owner(struct vhost_dev *dev);
 long vhost_dev_check_owner(struct vhost_dev *);
--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -21,6 +21,14 @@
 #include "vhost.h"
 
 #define VHOST_VSOCK_DEFAULT_HOST_CID	2
+/* Max number of bytes transferred before requeueing the job.
+ * Using this limit prevents one virtqueue from starving others. */
+#define VHOST_VSOCK_WEIGHT 0x80000
+/* Max number of packets transferred before requeueing the job.
+ * Using this limit prevents one virtqueue from starving others with
+ * small pkts.
+ */
+#define VHOST_VSOCK_PKT_WEIGHT 256
 
 enum {
 	VHOST_VSOCK_FEATURES = VHOST_FEATURES,
@@ -529,7 +537,9 @@ static int vhost_vsock_dev_open(struct i
 	vsock->vqs[VSOCK_VQ_TX].handle_kick = vhost_vsock_handle_tx_kick;
 	vsock->vqs[VSOCK_VQ_RX].handle_kick = vhost_vsock_handle_rx_kick;
 
-	vhost_dev_init(&vsock->dev, vqs, ARRAY_SIZE(vsock->vqs));
+	vhost_dev_init(&vsock->dev, vqs, ARRAY_SIZE(vsock->vqs),
+		       VHOST_VSOCK_PKT_WEIGHT,
+		       VHOST_VSOCK_WEIGHT);
 
 	file->private_data = vsock;
 	spin_lock_init(&vsock->send_pkt_list_lock);

[PATCH 4.9 052/103] vhost_net: fix possible infinite loop

[Greg Kroah-Hartman]

From: Jason Wang <jasowang@redhat.com>

commit e2412c07f8f3040593dfb88207865a3cd58680c0 upstream.

When the rx buffer is too small for a packet, we will discard the vq
descriptor and retry it for the next packet:

while ((sock_len = vhost_net_rx_peek_head_len(net, sock->sk,
					      &busyloop_intr))) {
...
	/* On overrun, truncate and discard */
	if (unlikely(headcount > UIO_MAXIOV)) {
		iov_iter_init(&msg.msg_iter, READ, vq->iov, 1, 1);
		err = sock->ops->recvmsg(sock, &msg,
					 1, MSG_DONTWAIT | MSG_TRUNC);
		pr_debug("Discarded rx packet: len %zd\n", sock_len);
		continue;
	}
...
}

This makes it possible to trigger a infinite while..continue loop
through the co-opreation of two VMs like:

1) Malicious VM1 allocate 1 byte rx buffer and try to slow down the
   vhost process as much as possible e.g using indirect descriptors or
   other.
2) Malicious VM2 generate packets to VM1 as fast as possible

Fixing this by checking against weight at the end of RX and TX
loop. This also eliminate other similar cases when:

- userspace is consuming the packets in the meanwhile
- theoretical TOCTOU attack if guest moving avail index back and forth
  to hit the continue after vhost find guest just add new buffers

This addresses CVE-2019-3900.

Fixes: d8316f3991d20 ("vhost: fix total length when packets are too short")
Fixes: 3a4d5c94e9593 ("vhost_net: a kernel-level virtio server")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[bwh: Backported to 4.9:
 - Both Tx modes are handled in one loop in handle_tx()
 - Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/vhost/net.c |   22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -393,7 +393,7 @@ static void handle_tx(struct vhost_net *
 	hdr_size = nvq->vhost_hlen;
 	zcopy = nvq->ubufs;
 
-	for (;;) {
+	do {
 		/* Release DMAs done buffers first */
 		if (zcopy)
 			vhost_zerocopy_signal_used(net, vq);
@@ -481,10 +481,7 @@ static void handle_tx(struct vhost_net *
 			vhost_zerocopy_signal_used(net, vq);
 		total_len += len;
 		vhost_net_tx_packet(net);
-		if (unlikely(vhost_exceeds_weight(vq, ++sent_pkts,
-						  total_len)))
-			break;
-	}
+	} while (likely(!vhost_exceeds_weight(vq, ++sent_pkts, total_len)));
 out:
 	mutex_unlock(&vq->mutex);
 }
@@ -682,7 +679,10 @@ static void handle_rx(struct vhost_net *
 		vq->log : NULL;
 	mergeable = vhost_has_feature(vq, VIRTIO_NET_F_MRG_RXBUF);
 
-	while ((sock_len = vhost_net_rx_peek_head_len(net, sock->sk))) {
+	do {
+		sock_len = vhost_net_rx_peek_head_len(net, sock->sk);
+		if (!sock_len)
+			break;
 		sock_len += sock_hlen;
 		vhost_len = sock_len + vhost_hlen;
 		headcount = get_rx_bufs(vq, vq->heads, vhost_len,
@@ -761,10 +761,10 @@ static void handle_rx(struct vhost_net *
 			vhost_log_write(vq, vq_log, log, vhost_len,
 					vq->iov, in);
 		total_len += vhost_len;
-		if (unlikely(vhost_exceeds_weight(vq, ++recv_pkts, total_len)))
-			goto out;
-	}
-	vhost_net_enable_vq(net, vq);
+	} while (likely(!vhost_exceeds_weight(vq, ++recv_pkts, total_len)));
+
+	if (!sock_len)
+		vhost_net_enable_vq(net, vq);
 out:
 	mutex_unlock(&vq->mutex);
 }
@@ -834,7 +834,7 @@ static int vhost_net_open(struct inode *
 		n->vqs[i].sock_hlen = 0;
 	}
 	vhost_dev_init(dev, vqs, VHOST_NET_VQ_MAX,
-		       VHOST_NET_WEIGHT, VHOST_NET_PKT_WEIGHT);
+		       VHOST_NET_PKT_WEIGHT, VHOST_NET_WEIGHT);
 
 	vhost_poll_init(n->poll + VHOST_NET_VQ_TX, handle_tx_net, POLLOUT, dev);
 	vhost_poll_init(n->poll + VHOST_NET_VQ_RX, handle_rx_net, POLLIN, dev);

[PATCH 4.9 053/103] vhost: scsi: add weight support

[Greg Kroah-Hartman]

From: Jason Wang <jasowang@redhat.com>

commit c1ea02f15ab5efb3e93fc3144d895410bf79fcf2 upstream.

This patch will check the weight and exit the loop if we exceeds the
weight. This is useful for preventing scsi kthread from hogging cpu
which is guest triggerable.

This addresses CVE-2019-3900.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Fixes: 057cbf49a1f0 ("tcm_vhost: Initial merge for vhost level target fabric driver")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[bwh: Backported to 4.9:
 - Drop changes in vhost_scsi_ctl_handle_vq()
 - Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/vhost/scsi.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/vhost/scsi.c
+++ b/drivers/vhost/scsi.c
@@ -851,7 +851,7 @@ vhost_scsi_handle_vq(struct vhost_scsi *
 	u64 tag;
 	u32 exp_data_len, data_direction;
 	unsigned out, in;
-	int head, ret, prot_bytes;
+	int head, ret, prot_bytes, c = 0;
 	size_t req_size, rsp_size = sizeof(struct virtio_scsi_cmd_resp);
 	size_t out_size, in_size;
 	u16 lun;
@@ -870,7 +870,7 @@ vhost_scsi_handle_vq(struct vhost_scsi *
 
 	vhost_disable_notify(&vs->dev, vq);
 
-	for (;;) {
+	do {
 		head = vhost_get_vq_desc(vq, vq->iov,
 					 ARRAY_SIZE(vq->iov), &out, &in,
 					 NULL, NULL);
@@ -1086,7 +1086,7 @@ vhost_scsi_handle_vq(struct vhost_scsi *
 		 */
 		INIT_WORK(&cmd->work, vhost_scsi_submission_work);
 		queue_work(vhost_scsi_workqueue, &cmd->work);
-	}
+	} while (likely(!vhost_exceeds_weight(vq, ++c, 0)));
 out:
 	mutex_unlock(&vq->mutex);
 }

[PATCH 4.9 054/103] siphash: add cryptographically secure PRF

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

commit 2c956a60778cbb6a27e0c7a8a52a91378c90e1d1 upstream.

SipHash is a 64-bit keyed hash function that is actually a
cryptographically secure PRF, like HMAC. Except SipHash is super fast,
and is meant to be used as a hashtable keyed lookup function, or as a
general PRF for short input use cases, such as sequence numbers or RNG
chaining.

For the first usage:

There are a variety of attacks known as "hashtable poisoning" in which an
attacker forms some data such that the hash of that data will be the
same, and then preceeds to fill up all entries of a hashbucket. This is
a realistic and well-known denial-of-service vector. Currently
hashtables use jhash, which is fast but not secure, and some kind of
rotating key scheme (or none at all, which isn't good). SipHash is meant
as a replacement for jhash in these cases.

There are a modicum of places in the kernel that are vulnerable to
hashtable poisoning attacks, either via userspace vectors or network
vectors, and there's not a reliable mechanism inside the kernel at the
moment to fix it. The first step toward fixing these issues is actually
getting a secure primitive into the kernel for developers to use. Then
we can, bit by bit, port things over to it as deemed appropriate.

While SipHash is extremely fast for a cryptographically secure function,
it is likely a bit slower than the insecure jhash, and so replacements
will be evaluated on a case-by-case basis based on whether or not the
difference in speed is negligible and whether or not the current jhash usage
poses a real security risk.

For the second usage:

A few places in the kernel are using MD5 or SHA1 for creating secure
sequence numbers, syn cookies, port numbers, or fast random numbers.
SipHash is a faster and more fitting, and more secure replacement for MD5
in those situations. Replacing MD5 and SHA1 with SipHash for these uses is
obvious and straight-forward, and so is submitted along with this patch
series. There shouldn't be much of a debate over its efficacy.

Dozens of languages are already using this internally for their hash
tables and PRFs. Some of the BSDs already use this in their kernels.
SipHash is a widely known high-speed solution to a widely known set of
problems, and it's time we catch-up.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 4.9 as dependency of commits df453700e8d8 "inet: switch
 IP ID generator to siphash" and 3c79107631db "netfilter: ctnetlink: don't
 use conntrack/expect object addresses as id"]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/siphash.txt |  100 +++++++++++++++++++
 MAINTAINERS               |    7 +
 include/linux/siphash.h   |   85 ++++++++++++++++
 lib/Kconfig.debug         |    6 -
 lib/Makefile              |    5 
 lib/siphash.c             |  232 ++++++++++++++++++++++++++++++++++++++++++++++
 lib/test_siphash.c        |  131 +++++++++++++++++++++++++
 7 files changed, 561 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/siphash.txt
 create mode 100644 include/linux/siphash.h
 create mode 100644 lib/siphash.c
 create mode 100644 lib/test_siphash.c

--- /dev/null
+++ b/Documentation/siphash.txt
@@ -0,0 +1,100 @@
+         SipHash - a short input PRF
+-----------------------------------------------
+Written by Jason A. Donenfeld <jason@zx2c4.com>
+
+SipHash is a cryptographically secure PRF -- a keyed hash function -- that
+performs very well for short inputs, hence the name. It was designed by
+cryptographers Daniel J. Bernstein and Jean-Philippe Aumasson. It is intended
+as a replacement for some uses of: `jhash`, `md5_transform`, `sha_transform`,
+and so forth.
+
+SipHash takes a secret key filled with randomly generated numbers and either
+an input buffer or several input integers. It spits out an integer that is
+indistinguishable from random. You may then use that integer as part of secure
+sequence numbers, secure cookies, or mask it off for use in a hash table.
+
+1. Generating a key
+
+Keys should always be generated from a cryptographically secure source of
+random numbers, either using get_random_bytes or get_random_once:
+
+siphash_key_t key;
+get_random_bytes(&key, sizeof(key));
+
+If you're not deriving your key from here, you're doing it wrong.
+
+2. Using the functions
+
+There are two variants of the function, one that takes a list of integers, and
+one that takes a buffer:
+
+u64 siphash(const void *data, size_t len, const siphash_key_t *key);
+
+And:
+
+u64 siphash_1u64(u64, const siphash_key_t *key);
+u64 siphash_2u64(u64, u64, const siphash_key_t *key);
+u64 siphash_3u64(u64, u64, u64, const siphash_key_t *key);
+u64 siphash_4u64(u64, u64, u64, u64, const siphash_key_t *key);
+u64 siphash_1u32(u32, const siphash_key_t *key);
+u64 siphash_2u32(u32, u32, const siphash_key_t *key);
+u64 siphash_3u32(u32, u32, u32, const siphash_key_t *key);
+u64 siphash_4u32(u32, u32, u32, u32, const siphash_key_t *key);
+
+If you pass the generic siphash function something of a constant length, it
+will constant fold at compile-time and automatically choose one of the
+optimized functions.
+
+3. Hashtable key function usage:
+
+struct some_hashtable {
+	DECLARE_HASHTABLE(hashtable, 8);
+	siphash_key_t key;
+};
+
+void init_hashtable(struct some_hashtable *table)
+{
+	get_random_bytes(&table->key, sizeof(table->key));
+}
+
+static inline hlist_head *some_hashtable_bucket(struct some_hashtable *table, struct interesting_input *input)
+{
+	return &table->hashtable[siphash(input, sizeof(*input), &table->key) & (HASH_SIZE(table->hashtable) - 1)];
+}
+
+You may then iterate like usual over the returned hash bucket.
+
+4. Security
+
+SipHash has a very high security margin, with its 128-bit key. So long as the
+key is kept secret, it is impossible for an attacker to guess the outputs of
+the function, even if being able to observe many outputs, since 2^128 outputs
+is significant.
+
+Linux implements the "2-4" variant of SipHash.
+
+5. Struct-passing Pitfalls
+
+Often times the XuY functions will not be large enough, and instead you'll
+want to pass a pre-filled struct to siphash. When doing this, it's important
+to always ensure the struct has no padding holes. The easiest way to do this
+is to simply arrange the members of the struct in descending order of size,
+and to use offsetendof() instead of sizeof() for getting the size. For
+performance reasons, if possible, it's probably a good thing to align the
+struct to the right boundary. Here's an example:
+
+const struct {
+	struct in6_addr saddr;
+	u32 counter;
+	u16 dport;
+} __aligned(SIPHASH_ALIGNMENT) combined = {
+	.saddr = *(struct in6_addr *)saddr,
+	.counter = counter,
+	.dport = dport
+};
+u64 h = siphash(&combined, offsetofend(typeof(combined), dport), &secret);
+
+6. Resources
+
+Read the SipHash paper if you're interested in learning more:
+https://131002.net/siphash/siphash.pdf
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11068,6 +11068,13 @@ F:	arch/arm/mach-s3c24xx/mach-bast.c
 F:	arch/arm/mach-s3c24xx/bast-ide.c
 F:	arch/arm/mach-s3c24xx/bast-irq.c
 
+SIPHASH PRF ROUTINES
+M:	Jason A. Donenfeld <Jason@zx2c4.com>
+S:	Maintained
+F:	lib/siphash.c
+F:	lib/test_siphash.c
+F:	include/linux/siphash.h
+
 TI DAVINCI MACHINE SUPPORT
 M:	Sekhar Nori <nsekhar@ti.com>
 M:	Kevin Hilman <khilman@kernel.org>
--- /dev/null
+++ b/include/linux/siphash.h
@@ -0,0 +1,85 @@
+/* Copyright (C) 2016 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
+ *
+ * This file is provided under a dual BSD/GPLv2 license.
+ *
+ * SipHash: a fast short-input PRF
+ * https://131002.net/siphash/
+ *
+ * This implementation is specifically for SipHash2-4.
+ */
+
+#ifndef _LINUX_SIPHASH_H
+#define _LINUX_SIPHASH_H
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#define SIPHASH_ALIGNMENT __alignof__(u64)
+typedef struct {
+	u64 key[2];
+} siphash_key_t;
+
+u64 __siphash_aligned(const void *data, size_t len, const siphash_key_t *key);
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+u64 __siphash_unaligned(const void *data, size_t len, const siphash_key_t *key);
+#endif
+
+u64 siphash_1u64(const u64 a, const siphash_key_t *key);
+u64 siphash_2u64(const u64 a, const u64 b, const siphash_key_t *key);
+u64 siphash_3u64(const u64 a, const u64 b, const u64 c,
+		 const siphash_key_t *key);
+u64 siphash_4u64(const u64 a, const u64 b, const u64 c, const u64 d,
+		 const siphash_key_t *key);
+u64 siphash_1u32(const u32 a, const siphash_key_t *key);
+u64 siphash_3u32(const u32 a, const u32 b, const u32 c,
+		 const siphash_key_t *key);
+
+static inline u64 siphash_2u32(const u32 a, const u32 b,
+			       const siphash_key_t *key)
+{
+	return siphash_1u64((u64)b << 32 | a, key);
+}
+static inline u64 siphash_4u32(const u32 a, const u32 b, const u32 c,
+			       const u32 d, const siphash_key_t *key)
+{
+	return siphash_2u64((u64)b << 32 | a, (u64)d << 32 | c, key);
+}
+
+
+static inline u64 ___siphash_aligned(const __le64 *data, size_t len,
+				     const siphash_key_t *key)
+{
+	if (__builtin_constant_p(len) && len == 4)
+		return siphash_1u32(le32_to_cpup((const __le32 *)data), key);
+	if (__builtin_constant_p(len) && len == 8)
+		return siphash_1u64(le64_to_cpu(data[0]), key);
+	if (__builtin_constant_p(len) && len == 16)
+		return siphash_2u64(le64_to_cpu(data[0]), le64_to_cpu(data[1]),
+				    key);
+	if (__builtin_constant_p(len) && len == 24)
+		return siphash_3u64(le64_to_cpu(data[0]), le64_to_cpu(data[1]),
+				    le64_to_cpu(data[2]), key);
+	if (__builtin_constant_p(len) && len == 32)
+		return siphash_4u64(le64_to_cpu(data[0]), le64_to_cpu(data[1]),
+				    le64_to_cpu(data[2]), le64_to_cpu(data[3]),
+				    key);
+	return __siphash_aligned(data, len, key);
+}
+
+/**
+ * siphash - compute 64-bit siphash PRF value
+ * @data: buffer to hash
+ * @size: size of @data
+ * @key: the siphash key
+ */
+static inline u64 siphash(const void *data, size_t len,
+			  const siphash_key_t *key)
+{
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+	if (!IS_ALIGNED((unsigned long)data, SIPHASH_ALIGNMENT))
+		return __siphash_unaligned(data, len, key);
+#endif
+	return ___siphash_aligned(data, len, key);
+}
+
+#endif /* _LINUX_SIPHASH_H */
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1822,9 +1822,9 @@ config TEST_HASH
 	tristate "Perform selftest on hash functions"
 	default n
 	help
-	  Enable this option to test the kernel's integer (<linux/hash,h>)
-	  and string (<linux/stringhash.h>) hash functions on boot
-	  (or module load).
+	  Enable this option to test the kernel's integer (<linux/hash.h>),
+	  string (<linux/stringhash.h>), and siphash (<linux/siphash.h>)
+	  hash functions on boot (or module load).
 
 	  This is intended to help people writing architecture-specific
 	  optimized versions.  If unsure, say N.
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -22,7 +22,8 @@ lib-y := ctype.o string.o vsprintf.o cmd
 	 sha1.o chacha20.o md5.o irq_regs.o argv_split.o \
 	 flex_proportions.o ratelimit.o show_mem.o \
 	 is_single_threaded.o plist.o decompress.o kobject_uevent.o \
-	 earlycpio.o seq_buf.o nmi_backtrace.o nodemask.o win_minmax.o
+	 earlycpio.o seq_buf.o siphash.o \
+	 nmi_backtrace.o nodemask.o win_minmax.o
 
 lib-$(CONFIG_MMU) += ioremap.o
 lib-$(CONFIG_SMP) += cpumask.o
@@ -44,7 +45,7 @@ obj-$(CONFIG_TEST_HEXDUMP) += test_hexdu
 obj-y += kstrtox.o
 obj-$(CONFIG_TEST_BPF) += test_bpf.o
 obj-$(CONFIG_TEST_FIRMWARE) += test_firmware.o
-obj-$(CONFIG_TEST_HASH) += test_hash.o
+obj-$(CONFIG_TEST_HASH) += test_hash.o test_siphash.o
 obj-$(CONFIG_TEST_KASAN) += test_kasan.o
 CFLAGS_test_kasan.o += -fno-builtin
 obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o
--- /dev/null
+++ b/lib/siphash.c
@@ -0,0 +1,232 @@
+/* Copyright (C) 2016 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
+ *
+ * This file is provided under a dual BSD/GPLv2 license.
+ *
+ * SipHash: a fast short-input PRF
+ * https://131002.net/siphash/
+ *
+ * This implementation is specifically for SipHash2-4.
+ */
+
+#include <linux/siphash.h>
+#include <asm/unaligned.h>
+
+#if defined(CONFIG_DCACHE_WORD_ACCESS) && BITS_PER_LONG == 64
+#include <linux/dcache.h>
+#include <asm/word-at-a-time.h>
+#endif
+
+#define SIPROUND \
+	do { \
+	v0 += v1; v1 = rol64(v1, 13); v1 ^= v0; v0 = rol64(v0, 32); \
+	v2 += v3; v3 = rol64(v3, 16); v3 ^= v2; \
+	v0 += v3; v3 = rol64(v3, 21); v3 ^= v0; \
+	v2 += v1; v1 = rol64(v1, 17); v1 ^= v2; v2 = rol64(v2, 32); \
+	} while (0)
+
+#define PREAMBLE(len) \
+	u64 v0 = 0x736f6d6570736575ULL; \
+	u64 v1 = 0x646f72616e646f6dULL; \
+	u64 v2 = 0x6c7967656e657261ULL; \
+	u64 v3 = 0x7465646279746573ULL; \
+	u64 b = ((u64)(len)) << 56; \
+	v3 ^= key->key[1]; \
+	v2 ^= key->key[0]; \
+	v1 ^= key->key[1]; \
+	v0 ^= key->key[0];
+
+#define POSTAMBLE \
+	v3 ^= b; \
+	SIPROUND; \
+	SIPROUND; \
+	v0 ^= b; \
+	v2 ^= 0xff; \
+	SIPROUND; \
+	SIPROUND; \
+	SIPROUND; \
+	SIPROUND; \
+	return (v0 ^ v1) ^ (v2 ^ v3);
+
+u64 __siphash_aligned(const void *data, size_t len, const siphash_key_t *key)
+{
+	const u8 *end = data + len - (len % sizeof(u64));
+	const u8 left = len & (sizeof(u64) - 1);
+	u64 m;
+	PREAMBLE(len)
+	for (; data != end; data += sizeof(u64)) {
+		m = le64_to_cpup(data);
+		v3 ^= m;
+		SIPROUND;
+		SIPROUND;
+		v0 ^= m;
+	}
+#if defined(CONFIG_DCACHE_WORD_ACCESS) && BITS_PER_LONG == 64
+	if (left)
+		b |= le64_to_cpu((__force __le64)(load_unaligned_zeropad(data) &
+						  bytemask_from_count(left)));
+#else
+	switch (left) {
+	case 7: b |= ((u64)end[6]) << 48;
+	case 6: b |= ((u64)end[5]) << 40;
+	case 5: b |= ((u64)end[4]) << 32;
+	case 4: b |= le32_to_cpup(data); break;
+	case 3: b |= ((u64)end[2]) << 16;
+	case 2: b |= le16_to_cpup(data); break;
+	case 1: b |= end[0];
+	}
+#endif
+	POSTAMBLE
+}
+EXPORT_SYMBOL(__siphash_aligned);
+
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+u64 __siphash_unaligned(const void *data, size_t len, const siphash_key_t *key)
+{
+	const u8 *end = data + len - (len % sizeof(u64));
+	const u8 left = len & (sizeof(u64) - 1);
+	u64 m;
+	PREAMBLE(len)
+	for (; data != end; data += sizeof(u64)) {
+		m = get_unaligned_le64(data);
+		v3 ^= m;
+		SIPROUND;
+		SIPROUND;
+		v0 ^= m;
+	}
+#if defined(CONFIG_DCACHE_WORD_ACCESS) && BITS_PER_LONG == 64
+	if (left)
+		b |= le64_to_cpu((__force __le64)(load_unaligned_zeropad(data) &
+						  bytemask_from_count(left)));
+#else
+	switch (left) {
+	case 7: b |= ((u64)end[6]) << 48;
+	case 6: b |= ((u64)end[5]) << 40;
+	case 5: b |= ((u64)end[4]) << 32;
+	case 4: b |= get_unaligned_le32(end); break;
+	case 3: b |= ((u64)end[2]) << 16;
+	case 2: b |= get_unaligned_le16(end); break;
+	case 1: b |= end[0];
+	}
+#endif
+	POSTAMBLE
+}
+EXPORT_SYMBOL(__siphash_unaligned);
+#endif
+
+/**
+ * siphash_1u64 - compute 64-bit siphash PRF value of a u64
+ * @first: first u64
+ * @key: the siphash key
+ */
+u64 siphash_1u64(const u64 first, const siphash_key_t *key)
+{
+	PREAMBLE(8)
+	v3 ^= first;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= first;
+	POSTAMBLE
+}
+EXPORT_SYMBOL(siphash_1u64);
+
+/**
+ * siphash_2u64 - compute 64-bit siphash PRF value of 2 u64
+ * @first: first u64
+ * @second: second u64
+ * @key: the siphash key
+ */
+u64 siphash_2u64(const u64 first, const u64 second, const siphash_key_t *key)
+{
+	PREAMBLE(16)
+	v3 ^= first;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= first;
+	v3 ^= second;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= second;
+	POSTAMBLE
+}
+EXPORT_SYMBOL(siphash_2u64);
+
+/**
+ * siphash_3u64 - compute 64-bit siphash PRF value of 3 u64
+ * @first: first u64
+ * @second: second u64
+ * @third: third u64
+ * @key: the siphash key
+ */
+u64 siphash_3u64(const u64 first, const u64 second, const u64 third,
+		 const siphash_key_t *key)
+{
+	PREAMBLE(24)
+	v3 ^= first;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= first;
+	v3 ^= second;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= second;
+	v3 ^= third;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= third;
+	POSTAMBLE
+}
+EXPORT_SYMBOL(siphash_3u64);
+
+/**
+ * siphash_4u64 - compute 64-bit siphash PRF value of 4 u64
+ * @first: first u64
+ * @second: second u64
+ * @third: third u64
+ * @forth: forth u64
+ * @key: the siphash key
+ */
+u64 siphash_4u64(const u64 first, const u64 second, const u64 third,
+		 const u64 forth, const siphash_key_t *key)
+{
+	PREAMBLE(32)
+	v3 ^= first;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= first;
+	v3 ^= second;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= second;
+	v3 ^= third;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= third;
+	v3 ^= forth;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= forth;
+	POSTAMBLE
+}
+EXPORT_SYMBOL(siphash_4u64);
+
+u64 siphash_1u32(const u32 first, const siphash_key_t *key)
+{
+	PREAMBLE(4)
+	b |= first;
+	POSTAMBLE
+}
+EXPORT_SYMBOL(siphash_1u32);
+
+u64 siphash_3u32(const u32 first, const u32 second, const u32 third,
+		 const siphash_key_t *key)
+{
+	u64 combined = (u64)second << 32 | first;
+	PREAMBLE(12)
+	v3 ^= combined;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= combined;
+	b |= third;
+	POSTAMBLE
+}
+EXPORT_SYMBOL(siphash_3u32);
--- /dev/null
+++ b/lib/test_siphash.c
@@ -0,0 +1,131 @@
+/* Test cases for siphash.c
+ *
+ * Copyright (C) 2016 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
+ *
+ * This file is provided under a dual BSD/GPLv2 license.
+ *
+ * SipHash: a fast short-input PRF
+ * https://131002.net/siphash/
+ *
+ * This implementation is specifically for SipHash2-4.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/siphash.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+
+/* Test vectors taken from official reference source available at:
+ *     https://131002.net/siphash/siphash24.c
+ */
+
+static const siphash_key_t test_key_siphash =
+	{{ 0x0706050403020100ULL, 0x0f0e0d0c0b0a0908ULL }};
+
+static const u64 test_vectors_siphash[64] = {
+	0x726fdb47dd0e0e31ULL, 0x74f839c593dc67fdULL, 0x0d6c8009d9a94f5aULL,
+	0x85676696d7fb7e2dULL, 0xcf2794e0277187b7ULL, 0x18765564cd99a68dULL,
+	0xcbc9466e58fee3ceULL, 0xab0200f58b01d137ULL, 0x93f5f5799a932462ULL,
+	0x9e0082df0ba9e4b0ULL, 0x7a5dbbc594ddb9f3ULL, 0xf4b32f46226bada7ULL,
+	0x751e8fbc860ee5fbULL, 0x14ea5627c0843d90ULL, 0xf723ca908e7af2eeULL,
+	0xa129ca6149be45e5ULL, 0x3f2acc7f57c29bdbULL, 0x699ae9f52cbe4794ULL,
+	0x4bc1b3f0968dd39cULL, 0xbb6dc91da77961bdULL, 0xbed65cf21aa2ee98ULL,
+	0xd0f2cbb02e3b67c7ULL, 0x93536795e3a33e88ULL, 0xa80c038ccd5ccec8ULL,
+	0xb8ad50c6f649af94ULL, 0xbce192de8a85b8eaULL, 0x17d835b85bbb15f3ULL,
+	0x2f2e6163076bcfadULL, 0xde4daaaca71dc9a5ULL, 0xa6a2506687956571ULL,
+	0xad87a3535c49ef28ULL, 0x32d892fad841c342ULL, 0x7127512f72f27cceULL,
+	0xa7f32346f95978e3ULL, 0x12e0b01abb051238ULL, 0x15e034d40fa197aeULL,
+	0x314dffbe0815a3b4ULL, 0x027990f029623981ULL, 0xcadcd4e59ef40c4dULL,
+	0x9abfd8766a33735cULL, 0x0e3ea96b5304a7d0ULL, 0xad0c42d6fc585992ULL,
+	0x187306c89bc215a9ULL, 0xd4a60abcf3792b95ULL, 0xf935451de4f21df2ULL,
+	0xa9538f0419755787ULL, 0xdb9acddff56ca510ULL, 0xd06c98cd5c0975ebULL,
+	0xe612a3cb9ecba951ULL, 0xc766e62cfcadaf96ULL, 0xee64435a9752fe72ULL,
+	0xa192d576b245165aULL, 0x0a8787bf8ecb74b2ULL, 0x81b3e73d20b49b6fULL,
+	0x7fa8220ba3b2eceaULL, 0x245731c13ca42499ULL, 0xb78dbfaf3a8d83bdULL,
+	0xea1ad565322a1a0bULL, 0x60e61c23a3795013ULL, 0x6606d7e446282b93ULL,
+	0x6ca4ecb15c5f91e1ULL, 0x9f626da15c9625f3ULL, 0xe51b38608ef25f57ULL,
+	0x958a324ceb064572ULL
+};
+
+static int __init siphash_test_init(void)
+{
+	u8 in[64] __aligned(SIPHASH_ALIGNMENT);
+	u8 in_unaligned[65] __aligned(SIPHASH_ALIGNMENT);
+	u8 i;
+	int ret = 0;
+
+	for (i = 0; i < 64; ++i) {
+		in[i] = i;
+		in_unaligned[i + 1] = i;
+		if (siphash(in, i, &test_key_siphash) !=
+						test_vectors_siphash[i]) {
+			pr_info("siphash self-test aligned %u: FAIL\n", i + 1);
+			ret = -EINVAL;
+		}
+		if (siphash(in_unaligned + 1, i, &test_key_siphash) !=
+						test_vectors_siphash[i]) {
+			pr_info("siphash self-test unaligned %u: FAIL\n", i + 1);
+			ret = -EINVAL;
+		}
+	}
+	if (siphash_1u64(0x0706050403020100ULL, &test_key_siphash) !=
+						test_vectors_siphash[8]) {
+		pr_info("siphash self-test 1u64: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (siphash_2u64(0x0706050403020100ULL, 0x0f0e0d0c0b0a0908ULL,
+			 &test_key_siphash) != test_vectors_siphash[16]) {
+		pr_info("siphash self-test 2u64: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (siphash_3u64(0x0706050403020100ULL, 0x0f0e0d0c0b0a0908ULL,
+			 0x1716151413121110ULL, &test_key_siphash) !=
+						test_vectors_siphash[24]) {
+		pr_info("siphash self-test 3u64: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (siphash_4u64(0x0706050403020100ULL, 0x0f0e0d0c0b0a0908ULL,
+			 0x1716151413121110ULL, 0x1f1e1d1c1b1a1918ULL,
+			 &test_key_siphash) != test_vectors_siphash[32]) {
+		pr_info("siphash self-test 4u64: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (siphash_1u32(0x03020100U, &test_key_siphash) !=
+						test_vectors_siphash[4]) {
+		pr_info("siphash self-test 1u32: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (siphash_2u32(0x03020100U, 0x07060504U, &test_key_siphash) !=
+						test_vectors_siphash[8]) {
+		pr_info("siphash self-test 2u32: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (siphash_3u32(0x03020100U, 0x07060504U,
+			 0x0b0a0908U, &test_key_siphash) !=
+						test_vectors_siphash[12]) {
+		pr_info("siphash self-test 3u32: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (siphash_4u32(0x03020100U, 0x07060504U,
+			 0x0b0a0908U, 0x0f0e0d0cU, &test_key_siphash) !=
+						test_vectors_siphash[16]) {
+		pr_info("siphash self-test 4u32: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (!ret)
+		pr_info("self-tests: pass\n");
+	return ret;
+}
+
+static void __exit siphash_test_exit(void)
+{
+}
+
+module_init(siphash_test_init);
+module_exit(siphash_test_exit);
+
+MODULE_AUTHOR("Jason A. Donenfeld <Jason@zx2c4.com>");
+MODULE_LICENSE("Dual BSD/GPL");

[PATCH 4.9 055/103] siphash: implement HalfSipHash1-3 for hash tables

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

commit 1ae2324f732c9c4e2fa4ebd885fa1001b70d52e1 upstream.

HalfSipHash, or hsiphash, is a shortened version of SipHash, which
generates 32-bit outputs using a weaker 64-bit key. It has *much* lower
security margins, and shouldn't be used for anything too sensitive, but
it could be used as a hashtable key function replacement, if the output
is never exposed, and if the security requirement is not too high.

The goal is to make this something that performance-critical jhash users
would be willing to use.

On 64-bit machines, HalfSipHash1-3 is slower than SipHash1-3, so we alias
SipHash1-3 to HalfSipHash1-3 on those systems.

64-bit x86_64:
[    0.509409] test_siphash:     SipHash2-4 cycles: 4049181
[    0.510650] test_siphash:     SipHash1-3 cycles: 2512884
[    0.512205] test_siphash: HalfSipHash1-3 cycles: 3429920
[    0.512904] test_siphash:    JenkinsHash cycles:  978267
So, we map hsiphash() -> SipHash1-3

32-bit x86:
[    0.509868] test_siphash:     SipHash2-4 cycles: 14812892
[    0.513601] test_siphash:     SipHash1-3 cycles:  9510710
[    0.515263] test_siphash: HalfSipHash1-3 cycles:  3856157
[    0.515952] test_siphash:    JenkinsHash cycles:  1148567
So, we map hsiphash() -> HalfSipHash1-3

hsiphash() is roughly 3 times slower than jhash(), but comes with a
considerable security improvement.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 4.9 to avoid regression for WireGuard with only half
 the siphash API present]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/siphash.txt |   75 ++++++++++
 include/linux/siphash.h   |   57 ++++++++
 lib/siphash.c             |  321 +++++++++++++++++++++++++++++++++++++++++++++-
 lib/test_siphash.c        |   98 +++++++++++++-
 4 files changed, 546 insertions(+), 5 deletions(-)

--- a/Documentation/siphash.txt
+++ b/Documentation/siphash.txt
@@ -98,3 +98,78 @@ u64 h = siphash(&combined, offsetofend(t
 
 Read the SipHash paper if you're interested in learning more:
 https://131002.net/siphash/siphash.pdf
+
+
+~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
+
+HalfSipHash - SipHash's insecure younger cousin
+-----------------------------------------------
+Written by Jason A. Donenfeld <jason@zx2c4.com>
+
+On the off-chance that SipHash is not fast enough for your needs, you might be
+able to justify using HalfSipHash, a terrifying but potentially useful
+possibility. HalfSipHash cuts SipHash's rounds down from "2-4" to "1-3" and,
+even scarier, uses an easily brute-forcable 64-bit key (with a 32-bit output)
+instead of SipHash's 128-bit key. However, this may appeal to some
+high-performance `jhash` users.
+
+Danger!
+
+Do not ever use HalfSipHash except for as a hashtable key function, and only
+then when you can be absolutely certain that the outputs will never be
+transmitted out of the kernel. This is only remotely useful over `jhash` as a
+means of mitigating hashtable flooding denial of service attacks.
+
+1. Generating a key
+
+Keys should always be generated from a cryptographically secure source of
+random numbers, either using get_random_bytes or get_random_once:
+
+hsiphash_key_t key;
+get_random_bytes(&key, sizeof(key));
+
+If you're not deriving your key from here, you're doing it wrong.
+
+2. Using the functions
+
+There are two variants of the function, one that takes a list of integers, and
+one that takes a buffer:
+
+u32 hsiphash(const void *data, size_t len, const hsiphash_key_t *key);
+
+And:
+
+u32 hsiphash_1u32(u32, const hsiphash_key_t *key);
+u32 hsiphash_2u32(u32, u32, const hsiphash_key_t *key);
+u32 hsiphash_3u32(u32, u32, u32, const hsiphash_key_t *key);
+u32 hsiphash_4u32(u32, u32, u32, u32, const hsiphash_key_t *key);
+
+If you pass the generic hsiphash function something of a constant length, it
+will constant fold at compile-time and automatically choose one of the
+optimized functions.
+
+3. Hashtable key function usage:
+
+struct some_hashtable {
+	DECLARE_HASHTABLE(hashtable, 8);
+	hsiphash_key_t key;
+};
+
+void init_hashtable(struct some_hashtable *table)
+{
+	get_random_bytes(&table->key, sizeof(table->key));
+}
+
+static inline hlist_head *some_hashtable_bucket(struct some_hashtable *table, struct interesting_input *input)
+{
+	return &table->hashtable[hsiphash(input, sizeof(*input), &table->key) & (HASH_SIZE(table->hashtable) - 1)];
+}
+
+You may then iterate like usual over the returned hash bucket.
+
+4. Performance
+
+HalfSipHash is roughly 3 times slower than JenkinsHash. For many replacements,
+this will not be a problem, as the hashtable lookup isn't the bottleneck. And
+in general, this is probably a good sacrifice to make for the security and DoS
+resistance of HalfSipHash.
--- a/include/linux/siphash.h
+++ b/include/linux/siphash.h
@@ -5,7 +5,9 @@
  * SipHash: a fast short-input PRF
  * https://131002.net/siphash/
  *
- * This implementation is specifically for SipHash2-4.
+ * This implementation is specifically for SipHash2-4 for a secure PRF
+ * and HalfSipHash1-3/SipHash1-3 for an insecure PRF only suitable for
+ * hashtables.
  */
 
 #ifndef _LINUX_SIPHASH_H
@@ -82,4 +84,57 @@ static inline u64 siphash(const void *da
 	return ___siphash_aligned(data, len, key);
 }
 
+#define HSIPHASH_ALIGNMENT __alignof__(unsigned long)
+typedef struct {
+	unsigned long key[2];
+} hsiphash_key_t;
+
+u32 __hsiphash_aligned(const void *data, size_t len,
+		       const hsiphash_key_t *key);
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+u32 __hsiphash_unaligned(const void *data, size_t len,
+			 const hsiphash_key_t *key);
+#endif
+
+u32 hsiphash_1u32(const u32 a, const hsiphash_key_t *key);
+u32 hsiphash_2u32(const u32 a, const u32 b, const hsiphash_key_t *key);
+u32 hsiphash_3u32(const u32 a, const u32 b, const u32 c,
+		  const hsiphash_key_t *key);
+u32 hsiphash_4u32(const u32 a, const u32 b, const u32 c, const u32 d,
+		  const hsiphash_key_t *key);
+
+static inline u32 ___hsiphash_aligned(const __le32 *data, size_t len,
+				      const hsiphash_key_t *key)
+{
+	if (__builtin_constant_p(len) && len == 4)
+		return hsiphash_1u32(le32_to_cpu(data[0]), key);
+	if (__builtin_constant_p(len) && len == 8)
+		return hsiphash_2u32(le32_to_cpu(data[0]), le32_to_cpu(data[1]),
+				     key);
+	if (__builtin_constant_p(len) && len == 12)
+		return hsiphash_3u32(le32_to_cpu(data[0]), le32_to_cpu(data[1]),
+				     le32_to_cpu(data[2]), key);
+	if (__builtin_constant_p(len) && len == 16)
+		return hsiphash_4u32(le32_to_cpu(data[0]), le32_to_cpu(data[1]),
+				     le32_to_cpu(data[2]), le32_to_cpu(data[3]),
+				     key);
+	return __hsiphash_aligned(data, len, key);
+}
+
+/**
+ * hsiphash - compute 32-bit hsiphash PRF value
+ * @data: buffer to hash
+ * @size: size of @data
+ * @key: the hsiphash key
+ */
+static inline u32 hsiphash(const void *data, size_t len,
+			   const hsiphash_key_t *key)
+{
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+	if (!IS_ALIGNED((unsigned long)data, HSIPHASH_ALIGNMENT))
+		return __hsiphash_unaligned(data, len, key);
+#endif
+	return ___hsiphash_aligned(data, len, key);
+}
+
 #endif /* _LINUX_SIPHASH_H */
--- a/lib/siphash.c
+++ b/lib/siphash.c
@@ -5,7 +5,9 @@
  * SipHash: a fast short-input PRF
  * https://131002.net/siphash/
  *
- * This implementation is specifically for SipHash2-4.
+ * This implementation is specifically for SipHash2-4 for a secure PRF
+ * and HalfSipHash1-3/SipHash1-3 for an insecure PRF only suitable for
+ * hashtables.
  */
 
 #include <linux/siphash.h>
@@ -230,3 +232,320 @@ u64 siphash_3u32(const u32 first, const
 	POSTAMBLE
 }
 EXPORT_SYMBOL(siphash_3u32);
+
+#if BITS_PER_LONG == 64
+/* Note that on 64-bit, we make HalfSipHash1-3 actually be SipHash1-3, for
+ * performance reasons. On 32-bit, below, we actually implement HalfSipHash1-3.
+ */
+
+#define HSIPROUND SIPROUND
+#define HPREAMBLE(len) PREAMBLE(len)
+#define HPOSTAMBLE \
+	v3 ^= b; \
+	HSIPROUND; \
+	v0 ^= b; \
+	v2 ^= 0xff; \
+	HSIPROUND; \
+	HSIPROUND; \
+	HSIPROUND; \
+	return (v0 ^ v1) ^ (v2 ^ v3);
+
+u32 __hsiphash_aligned(const void *data, size_t len, const hsiphash_key_t *key)
+{
+	const u8 *end = data + len - (len % sizeof(u64));
+	const u8 left = len & (sizeof(u64) - 1);
+	u64 m;
+	HPREAMBLE(len)
+	for (; data != end; data += sizeof(u64)) {
+		m = le64_to_cpup(data);
+		v3 ^= m;
+		HSIPROUND;
+		v0 ^= m;
+	}
+#if defined(CONFIG_DCACHE_WORD_ACCESS) && BITS_PER_LONG == 64
+	if (left)
+		b |= le64_to_cpu((__force __le64)(load_unaligned_zeropad(data) &
+						  bytemask_from_count(left)));
+#else
+	switch (left) {
+	case 7: b |= ((u64)end[6]) << 48;
+	case 6: b |= ((u64)end[5]) << 40;
+	case 5: b |= ((u64)end[4]) << 32;
+	case 4: b |= le32_to_cpup(data); break;
+	case 3: b |= ((u64)end[2]) << 16;
+	case 2: b |= le16_to_cpup(data); break;
+	case 1: b |= end[0];
+	}
+#endif
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(__hsiphash_aligned);
+
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+u32 __hsiphash_unaligned(const void *data, size_t len,
+			 const hsiphash_key_t *key)
+{
+	const u8 *end = data + len - (len % sizeof(u64));
+	const u8 left = len & (sizeof(u64) - 1);
+	u64 m;
+	HPREAMBLE(len)
+	for (; data != end; data += sizeof(u64)) {
+		m = get_unaligned_le64(data);
+		v3 ^= m;
+		HSIPROUND;
+		v0 ^= m;
+	}
+#if defined(CONFIG_DCACHE_WORD_ACCESS) && BITS_PER_LONG == 64
+	if (left)
+		b |= le64_to_cpu((__force __le64)(load_unaligned_zeropad(data) &
+						  bytemask_from_count(left)));
+#else
+	switch (left) {
+	case 7: b |= ((u64)end[6]) << 48;
+	case 6: b |= ((u64)end[5]) << 40;
+	case 5: b |= ((u64)end[4]) << 32;
+	case 4: b |= get_unaligned_le32(end); break;
+	case 3: b |= ((u64)end[2]) << 16;
+	case 2: b |= get_unaligned_le16(end); break;
+	case 1: b |= end[0];
+	}
+#endif
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(__hsiphash_unaligned);
+#endif
+
+/**
+ * hsiphash_1u32 - compute 64-bit hsiphash PRF value of a u32
+ * @first: first u32
+ * @key: the hsiphash key
+ */
+u32 hsiphash_1u32(const u32 first, const hsiphash_key_t *key)
+{
+	HPREAMBLE(4)
+	b |= first;
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(hsiphash_1u32);
+
+/**
+ * hsiphash_2u32 - compute 32-bit hsiphash PRF value of 2 u32
+ * @first: first u32
+ * @second: second u32
+ * @key: the hsiphash key
+ */
+u32 hsiphash_2u32(const u32 first, const u32 second, const hsiphash_key_t *key)
+{
+	u64 combined = (u64)second << 32 | first;
+	HPREAMBLE(8)
+	v3 ^= combined;
+	HSIPROUND;
+	v0 ^= combined;
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(hsiphash_2u32);
+
+/**
+ * hsiphash_3u32 - compute 32-bit hsiphash PRF value of 3 u32
+ * @first: first u32
+ * @second: second u32
+ * @third: third u32
+ * @key: the hsiphash key
+ */
+u32 hsiphash_3u32(const u32 first, const u32 second, const u32 third,
+		  const hsiphash_key_t *key)
+{
+	u64 combined = (u64)second << 32 | first;
+	HPREAMBLE(12)
+	v3 ^= combined;
+	HSIPROUND;
+	v0 ^= combined;
+	b |= third;
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(hsiphash_3u32);
+
+/**
+ * hsiphash_4u32 - compute 32-bit hsiphash PRF value of 4 u32
+ * @first: first u32
+ * @second: second u32
+ * @third: third u32
+ * @forth: forth u32
+ * @key: the hsiphash key
+ */
+u32 hsiphash_4u32(const u32 first, const u32 second, const u32 third,
+		  const u32 forth, const hsiphash_key_t *key)
+{
+	u64 combined = (u64)second << 32 | first;
+	HPREAMBLE(16)
+	v3 ^= combined;
+	HSIPROUND;
+	v0 ^= combined;
+	combined = (u64)forth << 32 | third;
+	v3 ^= combined;
+	HSIPROUND;
+	v0 ^= combined;
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(hsiphash_4u32);
+#else
+#define HSIPROUND \
+	do { \
+	v0 += v1; v1 = rol32(v1, 5); v1 ^= v0; v0 = rol32(v0, 16); \
+	v2 += v3; v3 = rol32(v3, 8); v3 ^= v2; \
+	v0 += v3; v3 = rol32(v3, 7); v3 ^= v0; \
+	v2 += v1; v1 = rol32(v1, 13); v1 ^= v2; v2 = rol32(v2, 16); \
+	} while (0)
+
+#define HPREAMBLE(len) \
+	u32 v0 = 0; \
+	u32 v1 = 0; \
+	u32 v2 = 0x6c796765U; \
+	u32 v3 = 0x74656462U; \
+	u32 b = ((u32)(len)) << 24; \
+	v3 ^= key->key[1]; \
+	v2 ^= key->key[0]; \
+	v1 ^= key->key[1]; \
+	v0 ^= key->key[0];
+
+#define HPOSTAMBLE \
+	v3 ^= b; \
+	HSIPROUND; \
+	v0 ^= b; \
+	v2 ^= 0xff; \
+	HSIPROUND; \
+	HSIPROUND; \
+	HSIPROUND; \
+	return v1 ^ v3;
+
+u32 __hsiphash_aligned(const void *data, size_t len, const hsiphash_key_t *key)
+{
+	const u8 *end = data + len - (len % sizeof(u32));
+	const u8 left = len & (sizeof(u32) - 1);
+	u32 m;
+	HPREAMBLE(len)
+	for (; data != end; data += sizeof(u32)) {
+		m = le32_to_cpup(data);
+		v3 ^= m;
+		HSIPROUND;
+		v0 ^= m;
+	}
+	switch (left) {
+	case 3: b |= ((u32)end[2]) << 16;
+	case 2: b |= le16_to_cpup(data); break;
+	case 1: b |= end[0];
+	}
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(__hsiphash_aligned);
+
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+u32 __hsiphash_unaligned(const void *data, size_t len,
+			 const hsiphash_key_t *key)
+{
+	const u8 *end = data + len - (len % sizeof(u32));
+	const u8 left = len & (sizeof(u32) - 1);
+	u32 m;
+	HPREAMBLE(len)
+	for (; data != end; data += sizeof(u32)) {
+		m = get_unaligned_le32(data);
+		v3 ^= m;
+		HSIPROUND;
+		v0 ^= m;
+	}
+	switch (left) {
+	case 3: b |= ((u32)end[2]) << 16;
+	case 2: b |= get_unaligned_le16(end); break;
+	case 1: b |= end[0];
+	}
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(__hsiphash_unaligned);
+#endif
+
+/**
+ * hsiphash_1u32 - compute 32-bit hsiphash PRF value of a u32
+ * @first: first u32
+ * @key: the hsiphash key
+ */
+u32 hsiphash_1u32(const u32 first, const hsiphash_key_t *key)
+{
+	HPREAMBLE(4)
+	v3 ^= first;
+	HSIPROUND;
+	v0 ^= first;
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(hsiphash_1u32);
+
+/**
+ * hsiphash_2u32 - compute 32-bit hsiphash PRF value of 2 u32
+ * @first: first u32
+ * @second: second u32
+ * @key: the hsiphash key
+ */
+u32 hsiphash_2u32(const u32 first, const u32 second, const hsiphash_key_t *key)
+{
+	HPREAMBLE(8)
+	v3 ^= first;
+	HSIPROUND;
+	v0 ^= first;
+	v3 ^= second;
+	HSIPROUND;
+	v0 ^= second;
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(hsiphash_2u32);
+
+/**
+ * hsiphash_3u32 - compute 32-bit hsiphash PRF value of 3 u32
+ * @first: first u32
+ * @second: second u32
+ * @third: third u32
+ * @key: the hsiphash key
+ */
+u32 hsiphash_3u32(const u32 first, const u32 second, const u32 third,
+		  const hsiphash_key_t *key)
+{
+	HPREAMBLE(12)
+	v3 ^= first;
+	HSIPROUND;
+	v0 ^= first;
+	v3 ^= second;
+	HSIPROUND;
+	v0 ^= second;
+	v3 ^= third;
+	HSIPROUND;
+	v0 ^= third;
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(hsiphash_3u32);
+
+/**
+ * hsiphash_4u32 - compute 32-bit hsiphash PRF value of 4 u32
+ * @first: first u32
+ * @second: second u32
+ * @third: third u32
+ * @forth: forth u32
+ * @key: the hsiphash key
+ */
+u32 hsiphash_4u32(const u32 first, const u32 second, const u32 third,
+		  const u32 forth, const hsiphash_key_t *key)
+{
+	HPREAMBLE(16)
+	v3 ^= first;
+	HSIPROUND;
+	v0 ^= first;
+	v3 ^= second;
+	HSIPROUND;
+	v0 ^= second;
+	v3 ^= third;
+	HSIPROUND;
+	v0 ^= third;
+	v3 ^= forth;
+	HSIPROUND;
+	v0 ^= forth;
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(hsiphash_4u32);
+#endif
--- a/lib/test_siphash.c
+++ b/lib/test_siphash.c
@@ -7,7 +7,9 @@
  * SipHash: a fast short-input PRF
  * https://131002.net/siphash/
  *
- * This implementation is specifically for SipHash2-4.
+ * This implementation is specifically for SipHash2-4 for a secure PRF
+ * and HalfSipHash1-3/SipHash1-3 for an insecure PRF only suitable for
+ * hashtables.
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -18,8 +20,8 @@
 #include <linux/errno.h>
 #include <linux/module.h>
 
-/* Test vectors taken from official reference source available at:
- *     https://131002.net/siphash/siphash24.c
+/* Test vectors taken from reference source available at:
+ *     https://github.com/veorq/SipHash
  */
 
 static const siphash_key_t test_key_siphash =
@@ -50,6 +52,64 @@ static const u64 test_vectors_siphash[64
 	0x958a324ceb064572ULL
 };
 
+#if BITS_PER_LONG == 64
+static const hsiphash_key_t test_key_hsiphash =
+	{{ 0x0706050403020100ULL, 0x0f0e0d0c0b0a0908ULL }};
+
+static const u32 test_vectors_hsiphash[64] = {
+	0x050fc4dcU, 0x7d57ca93U, 0x4dc7d44dU,
+	0xe7ddf7fbU, 0x88d38328U, 0x49533b67U,
+	0xc59f22a7U, 0x9bb11140U, 0x8d299a8eU,
+	0x6c063de4U, 0x92ff097fU, 0xf94dc352U,
+	0x57b4d9a2U, 0x1229ffa7U, 0xc0f95d34U,
+	0x2a519956U, 0x7d908b66U, 0x63dbd80cU,
+	0xb473e63eU, 0x8d297d1cU, 0xa6cce040U,
+	0x2b45f844U, 0xa320872eU, 0xdae6c123U,
+	0x67349c8cU, 0x705b0979U, 0xca9913a5U,
+	0x4ade3b35U, 0xef6cd00dU, 0x4ab1e1f4U,
+	0x43c5e663U, 0x8c21d1bcU, 0x16a7b60dU,
+	0x7a8ff9bfU, 0x1f2a753eU, 0xbf186b91U,
+	0xada26206U, 0xa3c33057U, 0xae3a36a1U,
+	0x7b108392U, 0x99e41531U, 0x3f1ad944U,
+	0xc8138825U, 0xc28949a6U, 0xfaf8876bU,
+	0x9f042196U, 0x68b1d623U, 0x8b5114fdU,
+	0xdf074c46U, 0x12cc86b3U, 0x0a52098fU,
+	0x9d292f9aU, 0xa2f41f12U, 0x43a71ed0U,
+	0x73f0bce6U, 0x70a7e980U, 0x243c6d75U,
+	0xfdb71513U, 0xa67d8a08U, 0xb7e8f148U,
+	0xf7a644eeU, 0x0f1837f2U, 0x4b6694e0U,
+	0xb7bbb3a8U
+};
+#else
+static const hsiphash_key_t test_key_hsiphash =
+	{{ 0x03020100U, 0x07060504U }};
+
+static const u32 test_vectors_hsiphash[64] = {
+	0x5814c896U, 0xe7e864caU, 0xbc4b0e30U,
+	0x01539939U, 0x7e059ea6U, 0x88e3d89bU,
+	0xa0080b65U, 0x9d38d9d6U, 0x577999b1U,
+	0xc839caedU, 0xe4fa32cfU, 0x959246eeU,
+	0x6b28096cU, 0x66dd9cd6U, 0x16658a7cU,
+	0xd0257b04U, 0x8b31d501U, 0x2b1cd04bU,
+	0x06712339U, 0x522aca67U, 0x911bb605U,
+	0x90a65f0eU, 0xf826ef7bU, 0x62512debU,
+	0x57150ad7U, 0x5d473507U, 0x1ec47442U,
+	0xab64afd3U, 0x0a4100d0U, 0x6d2ce652U,
+	0x2331b6a3U, 0x08d8791aU, 0xbc6dda8dU,
+	0xe0f6c934U, 0xb0652033U, 0x9b9851ccU,
+	0x7c46fb7fU, 0x732ba8cbU, 0xf142997aU,
+	0xfcc9aa1bU, 0x05327eb2U, 0xe110131cU,
+	0xf9e5e7c0U, 0xa7d708a6U, 0x11795ab1U,
+	0x65671619U, 0x9f5fff91U, 0xd89c5267U,
+	0x007783ebU, 0x95766243U, 0xab639262U,
+	0x9c7e1390U, 0xc368dda6U, 0x38ddc455U,
+	0xfa13d379U, 0x979ea4e8U, 0x53ecd77eU,
+	0x2ee80657U, 0x33dbb66aU, 0xae3f0577U,
+	0x88b4c4ccU, 0x3e7f480bU, 0x74c1ebf8U,
+	0x87178304U
+};
+#endif
+
 static int __init siphash_test_init(void)
 {
 	u8 in[64] __aligned(SIPHASH_ALIGNMENT);
@@ -70,6 +130,16 @@ static int __init siphash_test_init(void
 			pr_info("siphash self-test unaligned %u: FAIL\n", i + 1);
 			ret = -EINVAL;
 		}
+		if (hsiphash(in, i, &test_key_hsiphash) !=
+						test_vectors_hsiphash[i]) {
+			pr_info("hsiphash self-test aligned %u: FAIL\n", i + 1);
+			ret = -EINVAL;
+		}
+		if (hsiphash(in_unaligned + 1, i, &test_key_hsiphash) !=
+						test_vectors_hsiphash[i]) {
+			pr_info("hsiphash self-test unaligned %u: FAIL\n", i + 1);
+			ret = -EINVAL;
+		}
 	}
 	if (siphash_1u64(0x0706050403020100ULL, &test_key_siphash) !=
 						test_vectors_siphash[8]) {
@@ -115,6 +185,28 @@ static int __init siphash_test_init(void
 		pr_info("siphash self-test 4u32: FAIL\n");
 		ret = -EINVAL;
 	}
+	if (hsiphash_1u32(0x03020100U, &test_key_hsiphash) !=
+						test_vectors_hsiphash[4]) {
+		pr_info("hsiphash self-test 1u32: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (hsiphash_2u32(0x03020100U, 0x07060504U, &test_key_hsiphash) !=
+						test_vectors_hsiphash[8]) {
+		pr_info("hsiphash self-test 2u32: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (hsiphash_3u32(0x03020100U, 0x07060504U,
+			  0x0b0a0908U, &test_key_hsiphash) !=
+						test_vectors_hsiphash[12]) {
+		pr_info("hsiphash self-test 3u32: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (hsiphash_4u32(0x03020100U, 0x07060504U,
+			  0x0b0a0908U, 0x0f0e0d0cU, &test_key_hsiphash) !=
+						test_vectors_hsiphash[16]) {
+		pr_info("hsiphash self-test 4u32: FAIL\n");
+		ret = -EINVAL;
+	}
 	if (!ret)
 		pr_info("self-tests: pass\n");
 	return ret;

[PATCH 4.9 056/103] inet: switch IP ID generator to siphash

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit df453700e8d81b1bdafdf684365ee2b9431fb702 upstream.

According to Amit Klein and Benny Pinkas, IP ID generation is too weak
and might be used by attackers.

Even with recent net_hash_mix() fix (netns: provide pure entropy for net_hash_mix())
having 64bit key and Jenkins hash is risky.

It is time to switch to siphash and its 128bit keys.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Amit Klein <aksecurity@gmail.com>
Reported-by: Benny Pinkas <benny@pinkas.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 4.9: adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/siphash.h  |    5 +++++
 include/net/netns/ipv4.h |    2 ++
 net/ipv4/route.c         |   12 +++++++-----
 net/ipv6/output_core.c   |   30 ++++++++++++++++--------------
 4 files changed, 30 insertions(+), 19 deletions(-)

--- a/include/linux/siphash.h
+++ b/include/linux/siphash.h
@@ -21,6 +21,11 @@ typedef struct {
 	u64 key[2];
 } siphash_key_t;
 
+static inline bool siphash_key_is_zero(const siphash_key_t *key)
+{
+	return !(key->key[0] | key->key[1]);
+}
+
 u64 __siphash_aligned(const void *data, size_t len, const siphash_key_t *key);
 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 u64 __siphash_unaligned(const void *data, size_t len, const siphash_key_t *key);
--- a/include/net/netns/ipv4.h
+++ b/include/net/netns/ipv4.h
@@ -8,6 +8,7 @@
 #include <linux/uidgid.h>
 #include <net/inet_frag.h>
 #include <linux/rcupdate.h>
+#include <linux/siphash.h>
 
 struct tcpm_hash_bucket;
 struct ctl_table_header;
@@ -137,5 +138,6 @@ struct netns_ipv4 {
 	int sysctl_fib_multipath_use_neigh;
 #endif
 	atomic_t	rt_genid;
+	siphash_key_t	ip_id_key;
 };
 #endif
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -496,15 +496,17 @@ EXPORT_SYMBOL(ip_idents_reserve);
 
 void __ip_select_ident(struct net *net, struct iphdr *iph, int segs)
 {
-	static u32 ip_idents_hashrnd __read_mostly;
 	u32 hash, id;
 
-	net_get_random_once(&ip_idents_hashrnd, sizeof(ip_idents_hashrnd));
+	/* Note the following code is not safe, but this is okay. */
+	if (unlikely(siphash_key_is_zero(&net->ipv4.ip_id_key)))
+		get_random_bytes(&net->ipv4.ip_id_key,
+				 sizeof(net->ipv4.ip_id_key));
 
-	hash = jhash_3words((__force u32)iph->daddr,
+	hash = siphash_3u32((__force u32)iph->daddr,
 			    (__force u32)iph->saddr,
-			    iph->protocol ^ net_hash_mix(net),
-			    ip_idents_hashrnd);
+			    iph->protocol,
+			    &net->ipv4.ip_id_key);
 	id = ip_idents_reserve(hash, segs);
 	iph->id = htons(id);
 }
--- a/net/ipv6/output_core.c
+++ b/net/ipv6/output_core.c
@@ -10,15 +10,25 @@
 #include <net/secure_seq.h>
 #include <linux/netfilter.h>
 
-static u32 __ipv6_select_ident(struct net *net, u32 hashrnd,
+static u32 __ipv6_select_ident(struct net *net,
 			       const struct in6_addr *dst,
 			       const struct in6_addr *src)
 {
+	const struct {
+		struct in6_addr dst;
+		struct in6_addr src;
+	} __aligned(SIPHASH_ALIGNMENT) combined = {
+		.dst = *dst,
+		.src = *src,
+	};
 	u32 hash, id;
 
-	hash = __ipv6_addr_jhash(dst, hashrnd);
-	hash = __ipv6_addr_jhash(src, hash);
-	hash ^= net_hash_mix(net);
+	/* Note the following code is not safe, but this is okay. */
+	if (unlikely(siphash_key_is_zero(&net->ipv4.ip_id_key)))
+		get_random_bytes(&net->ipv4.ip_id_key,
+				 sizeof(net->ipv4.ip_id_key));
+
+	hash = siphash(&combined, sizeof(combined), &net->ipv4.ip_id_key);
 
 	/* Treat id of 0 as unset and if we get 0 back from ip_idents_reserve,
 	 * set the hight order instead thus minimizing possible future
@@ -41,7 +51,6 @@ static u32 __ipv6_select_ident(struct ne
  */
 void ipv6_proxy_select_ident(struct net *net, struct sk_buff *skb)
 {
-	static u32 ip6_proxy_idents_hashrnd __read_mostly;
 	struct in6_addr buf[2];
 	struct in6_addr *addrs;
 	u32 id;
@@ -53,11 +62,7 @@ void ipv6_proxy_select_ident(struct net
 	if (!addrs)
 		return;
 
-	net_get_random_once(&ip6_proxy_idents_hashrnd,
-			    sizeof(ip6_proxy_idents_hashrnd));
-
-	id = __ipv6_select_ident(net, ip6_proxy_idents_hashrnd,
-				 &addrs[1], &addrs[0]);
+	id = __ipv6_select_ident(net, &addrs[1], &addrs[0]);
 	skb_shinfo(skb)->ip6_frag_id = htonl(id);
 }
 EXPORT_SYMBOL_GPL(ipv6_proxy_select_ident);
@@ -66,12 +71,9 @@ __be32 ipv6_select_ident(struct net *net
 			 const struct in6_addr *daddr,
 			 const struct in6_addr *saddr)
 {
-	static u32 ip6_idents_hashrnd __read_mostly;
 	u32 id;
 
-	net_get_random_once(&ip6_idents_hashrnd, sizeof(ip6_idents_hashrnd));
-
-	id = __ipv6_select_ident(net, ip6_idents_hashrnd, daddr, saddr);
+	id = __ipv6_select_ident(net, daddr, saddr);
 	return htonl(id);
 }
 EXPORT_SYMBOL(ipv6_select_ident);

[PATCH 4.9 057/103] netfilter: ctnetlink: dont use conntrack/expect object addresses as id

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

commit 3c79107631db1f7fd32cf3f7368e4672004a3010 upstream.

else, we leak the addresses to userspace via ctnetlink events
and dumps.

Compute an ID on demand based on the immutable parts of nf_conn struct.

Another advantage compared to using an address is that there is no
immediate re-use of the same ID in case the conntrack entry is freed and
reallocated again immediately.

Fixes: 3583240249ef ("[NETFILTER]: nf_conntrack_expect: kill unique ID")
Fixes: 7f85f914721f ("[NETFILTER]: nf_conntrack: kill unique ID")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/netfilter/nf_conntrack.h |    2 ++
 net/netfilter/nf_conntrack_core.c    |   35 +++++++++++++++++++++++++++++++++++
 net/netfilter/nf_conntrack_netlink.c |   34 +++++++++++++++++++++++++++++-----
 3 files changed, 66 insertions(+), 5 deletions(-)

--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -336,6 +336,8 @@ struct nf_conn *nf_ct_tmpl_alloc(struct
 				 gfp_t flags);
 void nf_ct_tmpl_free(struct nf_conn *tmpl);
 
+u32 nf_ct_get_id(const struct nf_conn *ct);
+
 #define NF_CT_STAT_INC(net, count)	  __this_cpu_inc((net)->ct.stat->count)
 #define NF_CT_STAT_INC_ATOMIC(net, count) this_cpu_inc((net)->ct.stat->count)
 #define NF_CT_STAT_ADD_ATOMIC(net, count, v) this_cpu_add((net)->ct.stat->count, (v))
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -25,6 +25,7 @@
 #include <linux/slab.h>
 #include <linux/random.h>
 #include <linux/jhash.h>
+#include <linux/siphash.h>
 #include <linux/err.h>
 #include <linux/percpu.h>
 #include <linux/moduleparam.h>
@@ -301,6 +302,40 @@ nf_ct_invert_tuple(struct nf_conntrack_t
 }
 EXPORT_SYMBOL_GPL(nf_ct_invert_tuple);
 
+/* Generate a almost-unique pseudo-id for a given conntrack.
+ *
+ * intentionally doesn't re-use any of the seeds used for hash
+ * table location, we assume id gets exposed to userspace.
+ *
+ * Following nf_conn items do not change throughout lifetime
+ * of the nf_conn after it has been committed to main hash table:
+ *
+ * 1. nf_conn address
+ * 2. nf_conn->ext address
+ * 3. nf_conn->master address (normally NULL)
+ * 4. tuple
+ * 5. the associated net namespace
+ */
+u32 nf_ct_get_id(const struct nf_conn *ct)
+{
+	static __read_mostly siphash_key_t ct_id_seed;
+	unsigned long a, b, c, d;
+
+	net_get_random_once(&ct_id_seed, sizeof(ct_id_seed));
+
+	a = (unsigned long)ct;
+	b = (unsigned long)ct->master ^ net_hash_mix(nf_ct_net(ct));
+	c = (unsigned long)ct->ext;
+	d = (unsigned long)siphash(&ct->tuplehash, sizeof(ct->tuplehash),
+				   &ct_id_seed);
+#ifdef CONFIG_64BIT
+	return siphash_4u64((u64)a, (u64)b, (u64)c, (u64)d, &ct_id_seed);
+#else
+	return siphash_4u32((u32)a, (u32)b, (u32)c, (u32)d, &ct_id_seed);
+#endif
+}
+EXPORT_SYMBOL_GPL(nf_ct_get_id);
+
 static void
 clean_from_lists(struct nf_conn *ct)
 {
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -29,6 +29,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
+#include <linux/siphash.h>
 
 #include <linux/netfilter.h>
 #include <net/netlink.h>
@@ -441,7 +442,9 @@ static int ctnetlink_dump_ct_seq_adj(str
 
 static int ctnetlink_dump_id(struct sk_buff *skb, const struct nf_conn *ct)
 {
-	if (nla_put_be32(skb, CTA_ID, htonl((unsigned long)ct)))
+	__be32 id = (__force __be32)nf_ct_get_id(ct);
+
+	if (nla_put_be32(skb, CTA_ID, id))
 		goto nla_put_failure;
 	return 0;
 
@@ -1166,8 +1169,9 @@ static int ctnetlink_del_conntrack(struc
 	ct = nf_ct_tuplehash_to_ctrack(h);
 
 	if (cda[CTA_ID]) {
-		u_int32_t id = ntohl(nla_get_be32(cda[CTA_ID]));
-		if (id != (u32)(unsigned long)ct) {
+		__be32 id = nla_get_be32(cda[CTA_ID]);
+
+		if (id != (__force __be32)nf_ct_get_id(ct)) {
 			nf_ct_put(ct);
 			return -ENOENT;
 		}
@@ -2472,6 +2476,25 @@ nla_put_failure:
 
 static const union nf_inet_addr any_addr;
 
+static __be32 nf_expect_get_id(const struct nf_conntrack_expect *exp)
+{
+	static __read_mostly siphash_key_t exp_id_seed;
+	unsigned long a, b, c, d;
+
+	net_get_random_once(&exp_id_seed, sizeof(exp_id_seed));
+
+	a = (unsigned long)exp;
+	b = (unsigned long)exp->helper;
+	c = (unsigned long)exp->master;
+	d = (unsigned long)siphash(&exp->tuple, sizeof(exp->tuple), &exp_id_seed);
+
+#ifdef CONFIG_64BIT
+	return (__force __be32)siphash_4u64((u64)a, (u64)b, (u64)c, (u64)d, &exp_id_seed);
+#else
+	return (__force __be32)siphash_4u32((u32)a, (u32)b, (u32)c, (u32)d, &exp_id_seed);
+#endif
+}
+
 static int
 ctnetlink_exp_dump_expect(struct sk_buff *skb,
 			  const struct nf_conntrack_expect *exp)
@@ -2519,7 +2542,7 @@ ctnetlink_exp_dump_expect(struct sk_buff
 	}
 #endif
 	if (nla_put_be32(skb, CTA_EXPECT_TIMEOUT, htonl(timeout)) ||
-	    nla_put_be32(skb, CTA_EXPECT_ID, htonl((unsigned long)exp)) ||
+	    nla_put_be32(skb, CTA_EXPECT_ID, nf_expect_get_id(exp)) ||
 	    nla_put_be32(skb, CTA_EXPECT_FLAGS, htonl(exp->flags)) ||
 	    nla_put_be32(skb, CTA_EXPECT_CLASS, htonl(exp->class)))
 		goto nla_put_failure;
@@ -2818,7 +2841,8 @@ static int ctnetlink_get_expect(struct n
 
 	if (cda[CTA_EXPECT_ID]) {
 		__be32 id = nla_get_be32(cda[CTA_EXPECT_ID]);
-		if (ntohl(id) != (u32)(unsigned long)exp) {
+
+		if (id != nf_expect_get_id(exp)) {
 			nf_ct_expect_put(exp);
 			return -ENOENT;
 		}

[PATCH 4.9 058/103] xtensa: add missing isync to the cpu_reset TLB code

[Greg Kroah-Hartman]

From: Max Filippov <jcmvbkbc@gmail.com>

commit cd8869f4cb257f22b89495ca40f5281e58ba359c upstream.

ITLB entry modifications must be followed by the isync instruction
before the new entries are possibly used. cpu_reset lacks one isync
between ITLB way 6 initialization and jump to the identity mapping.
Add missing isync to xtensa cpu_reset.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/xtensa/kernel/setup.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -626,6 +626,7 @@ void cpu_reset(void)
 				      "add	%2, %2, %7\n\t"
 				      "addi	%0, %0, -1\n\t"
 				      "bnez	%0, 1b\n\t"
+				      "isync\n\t"
 				      /* Jump to identity mapping */
 				      "jx	%3\n"
 				      "2:\n\t"

[PATCH 4.9 059/103] ALSA: hda - Fix a memory leak bug

[Greg Kroah-Hartman]

From: Wenwen Wang <wenwen@cs.uga.edu>

commit cfef67f016e4c00a2f423256fc678a6967a9fc09 upstream.

In snd_hda_parse_generic_codec(), 'spec' is allocated through kzalloc().
Then, the pin widgets in 'codec' are parsed. However, if the parsing
process fails, 'spec' is not deallocated, leading to a memory leak.

To fix the above issue, free 'spec' before returning the error.

Fixes: 352f7f914ebb ("ALSA: hda - Merge Realtek parser code to generic parser")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_generic.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -5898,7 +5898,7 @@ static int snd_hda_parse_generic_codec(s
 
 	err = snd_hda_parse_pin_defcfg(codec, &spec->autocfg, NULL, 0);
 	if (err < 0)
-		return err;
+		goto error;
 
 	err = snd_hda_gen_parse_auto_config(codec, &spec->autocfg);
 	if (err < 0)

[PATCH 4.9 060/103] ALSA: hda - Add a generic reboot_notify

[Greg Kroah-Hartman]

From: Hui Wang <hui.wang@canonical.com>

commit 871b9066027702e6e6589da0e1edd3b7dede7205 upstream.

Make codec enter D3 before rebooting or poweroff can fix the noise
issue on some laptops. And in theory it is harmless for all codecs
to enter D3 before rebooting or poweroff, let us add a generic
reboot_notify, then realtek and conexant drivers can call this
function.

Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_generic.c    |   19 +++++++++++++++++++
 sound/pci/hda/hda_generic.h    |    1 +
 sound/pci/hda/patch_conexant.c |    6 +-----
 sound/pci/hda/patch_realtek.c  |   11 +----------
 4 files changed, 22 insertions(+), 15 deletions(-)

--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -5849,6 +5849,24 @@ void snd_hda_gen_free(struct hda_codec *
 }
 EXPORT_SYMBOL_GPL(snd_hda_gen_free);
 
+/**
+ * snd_hda_gen_reboot_notify - Make codec enter D3 before rebooting
+ * @codec: the HDA codec
+ *
+ * This can be put as patch_ops reboot_notify function.
+ */
+void snd_hda_gen_reboot_notify(struct hda_codec *codec)
+{
+	/* Make the codec enter D3 to avoid spurious noises from the internal
+	 * speaker during (and after) reboot
+	 */
+	snd_hda_codec_set_power_to_all(codec, codec->core.afg, AC_PWRST_D3);
+	snd_hda_codec_write(codec, codec->core.afg, 0,
+			    AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+	msleep(10);
+}
+EXPORT_SYMBOL_GPL(snd_hda_gen_reboot_notify);
+
 #ifdef CONFIG_PM
 /**
  * snd_hda_gen_check_power_status - check the loopback power save state
@@ -5876,6 +5894,7 @@ static const struct hda_codec_ops generi
 	.init = snd_hda_gen_init,
 	.free = snd_hda_gen_free,
 	.unsol_event = snd_hda_jack_unsol_event,
+	.reboot_notify = snd_hda_gen_reboot_notify,
 #ifdef CONFIG_PM
 	.check_power_status = snd_hda_gen_check_power_status,
 #endif
--- a/sound/pci/hda/hda_generic.h
+++ b/sound/pci/hda/hda_generic.h
@@ -322,6 +322,7 @@ int snd_hda_gen_parse_auto_config(struct
 				  struct auto_pin_cfg *cfg);
 int snd_hda_gen_build_controls(struct hda_codec *codec);
 int snd_hda_gen_build_pcms(struct hda_codec *codec);
+void snd_hda_gen_reboot_notify(struct hda_codec *codec);
 
 /* standard jack event callbacks */
 void snd_hda_gen_hp_automute(struct hda_codec *codec,
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -216,11 +216,7 @@ static void cx_auto_reboot_notify(struct
 	/* Turn the problematic codec into D3 to avoid spurious noises
 	   from the internal speaker during (and after) reboot */
 	cx_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, false);
-
-	snd_hda_codec_set_power_to_all(codec, codec->core.afg, AC_PWRST_D3);
-	snd_hda_codec_write(codec, codec->core.afg, 0,
-			    AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
-	msleep(10);
+	snd_hda_gen_reboot_notify(codec);
 }
 
 static void cx_auto_free(struct hda_codec *codec)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -802,15 +802,6 @@ static void alc_reboot_notify(struct hda
 		alc_shutup(codec);
 }
 
-/* power down codec to D3 at reboot/shutdown; set as reboot_notify ops */
-static void alc_d3_at_reboot(struct hda_codec *codec)
-{
-	snd_hda_codec_set_power_to_all(codec, codec->core.afg, AC_PWRST_D3);
-	snd_hda_codec_write(codec, codec->core.afg, 0,
-			    AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
-	msleep(10);
-}
-
 #define alc_free	snd_hda_gen_free
 
 #ifdef CONFIG_PM
@@ -4473,7 +4464,7 @@ static void alc_fixup_tpt440_dock(struct
 	struct alc_spec *spec = codec->spec;
 
 	if (action == HDA_FIXUP_ACT_PRE_PROBE) {
-		spec->reboot_notify = alc_d3_at_reboot; /* reduce noise */
+		spec->reboot_notify = snd_hda_gen_reboot_notify; /* reduce noise */
 		spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP;
 		codec->power_save_node = 0; /* avoid click noises */
 		snd_hda_apply_pincfgs(codec, pincfgs);

[PATCH 4.9 061/103] ALSA: hda - Let all conexant codec enter D3 when rebooting

[Greg Kroah-Hartman]

From: Hui Wang <hui.wang@canonical.com>

commit 401714d9534aad8c24196b32600da683116bbe09 upstream.

We have 3 new lenovo laptops which have conexant codec 0x14f11f86,
these 3 laptops also have the noise issue when rebooting, after
letting the codec enter D3 before rebooting or poweroff, the noise
disappers.

Instead of adding a new ID again in the reboot_notify(), let us make
this function apply to all conexant codec. In theory make codec enter
D3 before rebooting or poweroff is harmless, and I tested this change
on a couple of other Lenovo laptops which have different conexant
codecs, there is no side effect so far.

Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_conexant.c |    9 ---------
 1 file changed, 9 deletions(-)

--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -204,15 +204,6 @@ static void cx_auto_reboot_notify(struct
 {
 	struct conexant_spec *spec = codec->spec;
 
-	switch (codec->core.vendor_id) {
-	case 0x14f12008: /* CX8200 */
-	case 0x14f150f2: /* CX20722 */
-	case 0x14f150f4: /* CX20724 */
-		break;
-	default:
-		return;
-	}
-
 	/* Turn the problematic codec into D3 to avoid spurious noises
 	   from the internal speaker during (and after) reboot */
 	cx_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, false);

[PATCH 4.9 062/103] HID: holtek: test for sanity of intfdata

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit 01ec0a5f19c8c82960a07f6c7410fc9e01d7fb51 upstream.

The ioctl handler uses the intfdata of a second interface,
which may not be present in a broken or malicious device, hence
the intfdata needs to be checked for NULL.

[jkosina@suse.cz: fix newly added spurious space]
Reported-by: syzbot+965152643a75a56737be@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/hid-holtek-kbd.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/hid/hid-holtek-kbd.c
+++ b/drivers/hid/hid-holtek-kbd.c
@@ -126,9 +126,14 @@ static int holtek_kbd_input_event(struct
 
 	/* Locate the boot interface, to receive the LED change events */
 	struct usb_interface *boot_interface = usb_ifnum_to_if(usb_dev, 0);
+	struct hid_device *boot_hid;
+	struct hid_input *boot_hid_input;
 
-	struct hid_device *boot_hid = usb_get_intfdata(boot_interface);
-	struct hid_input *boot_hid_input = list_first_entry(&boot_hid->inputs,
+	if (unlikely(boot_interface == NULL))
+		return -ENODEV;
+
+	boot_hid = usb_get_intfdata(boot_interface);
+	boot_hid_input = list_first_entry(&boot_hid->inputs,
 		struct hid_input, list);
 
 	return boot_hid_input->input->event(boot_hid_input->input, type, code,

[PATCH 4.9 063/103] HID: hiddev: avoid opening a disconnected device

[Greg Kroah-Hartman]

From: Hillf Danton <hdanton@sina.com>

commit 9c09b214f30e3c11f9b0b03f89442df03643794d upstream.

syzbot found the following crash on:

HEAD commit:    e96407b4 usb-fuzzer: main usb gadget fuzzer driver
git tree:       https://github.com/google/kasan.git usb-fuzzer
console output: https://syzkaller.appspot.com/x/log.txt?x=147ac20c600000
kernel config:  https://syzkaller.appspot.com/x/.config?x=792eb47789f57810
dashboard link: https://syzkaller.appspot.com/bug?extid=62a1e04fd3ec2abf099e
compiler:       gcc (GCC) 9.0.0 20181231 (experimental)

==================================================================
BUG: KASAN: use-after-free in __lock_acquire+0x302a/0x3b50
kernel/locking/lockdep.c:3753
Read of size 8 at addr ffff8881cf591a08 by task syz-executor.1/26260

CPU: 1 PID: 26260 Comm: syz-executor.1 Not tainted 5.3.0-rc2+ #24
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0xca/0x13e lib/dump_stack.c:113
  print_address_description+0x6a/0x32c mm/kasan/report.c:351
  __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482
  kasan_report+0xe/0x12 mm/kasan/common.c:612
  __lock_acquire+0x302a/0x3b50 kernel/locking/lockdep.c:3753
  lock_acquire+0x127/0x320 kernel/locking/lockdep.c:4412
  __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
  _raw_spin_lock_irqsave+0x32/0x50 kernel/locking/spinlock.c:159
  hiddev_release+0x82/0x520 drivers/hid/usbhid/hiddev.c:221
  __fput+0x2d7/0x840 fs/file_table.c:280
  task_work_run+0x13f/0x1c0 kernel/task_work.c:113
  exit_task_work include/linux/task_work.h:22 [inline]
  do_exit+0x8ef/0x2c50 kernel/exit.c:878
  do_group_exit+0x125/0x340 kernel/exit.c:982
  get_signal+0x466/0x23d0 kernel/signal.c:2728
  do_signal+0x88/0x14e0 arch/x86/kernel/signal.c:815
  exit_to_usermode_loop+0x1a2/0x200 arch/x86/entry/common.c:159
  prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
  syscall_return_slowpath arch/x86/entry/common.c:274 [inline]
  do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x459829
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f75b2a6ccf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 000000000075c078 RCX: 0000000000459829
RDX: 0000000000000000 RSI: 0000000000000080 RDI: 000000000075c078
RBP: 000000000075c070 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000075c07c
R13: 00007ffcdfe1023f R14: 00007f75b2a6d9c0 R15: 000000000075c07c

Allocated by task 104:
  save_stack+0x1b/0x80 mm/kasan/common.c:69
  set_track mm/kasan/common.c:77 [inline]
  __kasan_kmalloc mm/kasan/common.c:487 [inline]
  __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:460
  kmalloc include/linux/slab.h:552 [inline]
  kzalloc include/linux/slab.h:748 [inline]
  hiddev_connect+0x242/0x5b0 drivers/hid/usbhid/hiddev.c:900
  hid_connect+0x239/0xbb0 drivers/hid/hid-core.c:1882
  hid_hw_start drivers/hid/hid-core.c:1981 [inline]
  hid_hw_start+0xa2/0x130 drivers/hid/hid-core.c:1972
  appleir_probe+0x13e/0x1a0 drivers/hid/hid-appleir.c:308
  hid_device_probe+0x2be/0x3f0 drivers/hid/hid-core.c:2209
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  hid_add_device+0x33c/0x990 drivers/hid/hid-core.c:2365
  usbhid_probe+0xa81/0xfa0 drivers/hid/usbhid/hid-core.c:1386
  usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023
  generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210
  usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536
  hub_port_connect drivers/usb/core/hub.c:5098 [inline]
  hub_port_connect_change drivers/usb/core/hub.c:5213 [inline]
  port_event drivers/usb/core/hub.c:5359 [inline]
  hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441
  process_one_work+0x92b/0x1530 kernel/workqueue.c:2269
  worker_thread+0x96/0xe20 kernel/workqueue.c:2415
  kthread+0x318/0x420 kernel/kthread.c:255
  ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

Freed by task 104:
  save_stack+0x1b/0x80 mm/kasan/common.c:69
  set_track mm/kasan/common.c:77 [inline]
  __kasan_slab_free+0x130/0x180 mm/kasan/common.c:449
  slab_free_hook mm/slub.c:1423 [inline]
  slab_free_freelist_hook mm/slub.c:1470 [inline]
  slab_free mm/slub.c:3012 [inline]
  kfree+0xe4/0x2f0 mm/slub.c:3953
  hiddev_connect.cold+0x45/0x5c drivers/hid/usbhid/hiddev.c:914
  hid_connect+0x239/0xbb0 drivers/hid/hid-core.c:1882
  hid_hw_start drivers/hid/hid-core.c:1981 [inline]
  hid_hw_start+0xa2/0x130 drivers/hid/hid-core.c:1972
  appleir_probe+0x13e/0x1a0 drivers/hid/hid-appleir.c:308
  hid_device_probe+0x2be/0x3f0 drivers/hid/hid-core.c:2209
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  hid_add_device+0x33c/0x990 drivers/hid/hid-core.c:2365
  usbhid_probe+0xa81/0xfa0 drivers/hid/usbhid/hid-core.c:1386
  usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023
  generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210
  usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266
  really_probe+0x281/0x650 drivers/base/dd.c:548
  driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
  __device_attach+0x217/0x360 drivers/base/dd.c:882
  bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
  device_add+0xae6/0x16f0 drivers/base/core.c:2114
  usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536
  hub_port_connect drivers/usb/core/hub.c:5098 [inline]
  hub_port_connect_change drivers/usb/core/hub.c:5213 [inline]
  port_event drivers/usb/core/hub.c:5359 [inline]
  hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441
  process_one_work+0x92b/0x1530 kernel/workqueue.c:2269
  worker_thread+0x96/0xe20 kernel/workqueue.c:2415
  kthread+0x318/0x420 kernel/kthread.c:255
  ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

The buggy address belongs to the object at ffff8881cf591900
  which belongs to the cache kmalloc-512 of size 512
The buggy address is located 264 bytes inside of
  512-byte region [ffff8881cf591900, ffff8881cf591b00)
The buggy address belongs to the page:
page:ffffea00073d6400 refcount:1 mapcount:0 mapping:ffff8881da002500
index:0x0 compound_mapcount: 0
flags: 0x200000000010200(slab|head)
raw: 0200000000010200 0000000000000000 0000000100000001 ffff8881da002500
raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff8881cf591900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8881cf591980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff8881cf591a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                       ^
  ffff8881cf591a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8881cf591b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================

In order to avoid opening a disconnected device, we need to check exist
again after acquiring the existance lock, and bail out if necessary.

Reported-by: syzbot <syzbot+62a1e04fd3ec2abf099e@syzkaller.appspotmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/usbhid/hiddev.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -308,6 +308,14 @@ static int hiddev_open(struct inode *ino
 	spin_unlock_irq(&list->hiddev->list_lock);
 
 	mutex_lock(&hiddev->existancelock);
+	/*
+	 * recheck exist with existance lock held to
+	 * avoid opening a disconnected device
+	 */
+	if (!list->hiddev->exist) {
+		res = -ENODEV;
+		goto bail_unlock;
+	}
 	if (!list->hiddev->open++)
 		if (list->hiddev->exist) {
 			struct hid_device *hid = hiddev->hid;

[PATCH 4.9 064/103] HID: hiddev: do cleanup in failure of opening a device

[Greg Kroah-Hartman]

From: Hillf Danton <hdanton@sina.com>

commit 6d4472d7bec39917b54e4e80245784ea5d60ce49 upstream.

Undo what we did for opening before releasing the memory slice.

Reported-by: syzbot <syzbot+62a1e04fd3ec2abf099e@syzkaller.appspotmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/usbhid/hiddev.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -330,6 +330,10 @@ static int hiddev_open(struct inode *ino
 	return 0;
 bail_unlock:
 	mutex_unlock(&hiddev->existancelock);
+
+	spin_lock_irq(&list->hiddev->list_lock);
+	list_del(&list->node);
+	spin_unlock_irq(&list->hiddev->list_lock);
 bail:
 	file->private_data = NULL;
 	vfree(list);

[PATCH 4.9 065/103] Input: kbtab - sanity check for endpoint type

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit c88090dfc84254fa149174eb3e6a8458de1912c4 upstream.

The driver should check whether the endpoint it uses has the correct
type.

Reported-by: syzbot+c7df50363aaff50aa363@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/tablet/kbtab.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/input/tablet/kbtab.c
+++ b/drivers/input/tablet/kbtab.c
@@ -125,6 +125,10 @@ static int kbtab_probe(struct usb_interf
 	if (intf->cur_altsetting->desc.bNumEndpoints < 1)
 		return -ENODEV;
 
+	endpoint = &intf->cur_altsetting->endpoint[0].desc;
+	if (!usb_endpoint_is_int_in(endpoint))
+		return -ENODEV;
+
 	kbtab = kzalloc(sizeof(struct kbtab), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!kbtab || !input_dev)
@@ -163,8 +167,6 @@ static int kbtab_probe(struct usb_interf
 	input_set_abs_params(input_dev, ABS_Y, 0, 0x1750, 4, 0);
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xff, 0, 0);
 
-	endpoint = &intf->cur_altsetting->endpoint[0].desc;
-
 	usb_fill_int_urb(kbtab->irq, dev,
 			 usb_rcvintpipe(dev, endpoint->bEndpointAddress),
 			 kbtab->data, 8,

[PATCH 4.9 066/103] Input: iforce - add sanity checks

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit 849f5ae3a513c550cad741c68dd3d7eb2bcc2a2c upstream.

The endpoint type should also be checked before a device
is accepted.

Reported-by: syzbot+5efc10c005014d061a74@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/joystick/iforce/iforce-usb.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/input/joystick/iforce/iforce-usb.c
+++ b/drivers/input/joystick/iforce/iforce-usb.c
@@ -145,7 +145,12 @@ static int iforce_usb_probe(struct usb_i
 		return -ENODEV;
 
 	epirq = &interface->endpoint[0].desc;
+	if (!usb_endpoint_is_int_in(epirq))
+		return -ENODEV;
+
 	epout = &interface->endpoint[1].desc;
+	if (!usb_endpoint_is_int_out(epout))
+		return -ENODEV;
 
 	if (!(iforce = kzalloc(sizeof(struct iforce) + 32, GFP_KERNEL)))
 		goto fail;

[PATCH 4.9 067/103] net: usb: pegasus: fix improper read if get_registers() fail

[Greg Kroah-Hartman]

From: Denis Kirjanov <kda@linux-powerpc.org>

commit 224c04973db1125fcebefffd86115f99f50f8277 upstream.

get_registers() may fail with -ENOMEM and in this
case we can read a garbage from the status variable tmp.

Reported-by: syzbot+3499a83b2d062ae409d4@syzkaller.appspotmail.com
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/usb/pegasus.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -285,7 +285,7 @@ static void mdio_write(struct net_device
 static int read_eprom_word(pegasus_t *pegasus, __u8 index, __u16 *retdata)
 {
 	int i;
-	__u8 tmp;
+	__u8 tmp = 0;
 	__le16 retdatai;
 	int ret;
 

[PATCH 4.9 068/103] xen/pciback: remove set but not used variable old_state

[Greg Kroah-Hartman]

[ Upstream commit 09e088a4903bd0dd911b4f1732b250130cdaffed ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/xen/xen-pciback/conf_space_capability.c: In function pm_ctrl_write:
drivers/xen/xen-pciback/conf_space_capability.c:119:25: warning:
 variable old_state set but not used [-Wunused-but-set-variable]

It is never used so can be removed.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/xen-pciback/conf_space_capability.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/xen/xen-pciback/conf_space_capability.c b/drivers/xen/xen-pciback/conf_space_capability.c
index 7f83e9083e9dd..b1a1d7de0894e 100644
--- a/drivers/xen/xen-pciback/conf_space_capability.c
+++ b/drivers/xen/xen-pciback/conf_space_capability.c
@@ -115,13 +115,12 @@ static int pm_ctrl_write(struct pci_dev *dev, int offset, u16 new_value,
 {
 	int err;
 	u16 old_value;
-	pci_power_t new_state, old_state;
+	pci_power_t new_state;
 
 	err = pci_read_config_word(dev, offset, &old_value);
 	if (err)
 		goto out;
 
-	old_state = (pci_power_t)(old_value & PCI_PM_CTRL_STATE_MASK);
 	new_state = (pci_power_t)(new_value & PCI_PM_CTRL_STATE_MASK);
 
 	new_value &= PM_OK_BITS;
-- 
2.20.1

[PATCH 4.9 069/103] irqchip/irq-imx-gpcv2: Forward irq type to parent

[Greg Kroah-Hartman]

[ Upstream commit 9a446ef08f3bfc0c3deb9c6be840af2528ef8cf8 ]

The GPCv2 is a stacked IRQ controller below the ARM GIC. It doesn't
care about the IRQ type itself, but needs to forward the type to the
parent IRQ controller, so this one can be configured correctly.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-imx-gpcv2.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/irqchip/irq-imx-gpcv2.c b/drivers/irqchip/irq-imx-gpcv2.c
index 2d203b422129e..c56da0b13da5d 100644
--- a/drivers/irqchip/irq-imx-gpcv2.c
+++ b/drivers/irqchip/irq-imx-gpcv2.c
@@ -145,6 +145,7 @@ static struct irq_chip gpcv2_irqchip_data_chip = {
 	.irq_unmask		= imx_gpcv2_irq_unmask,
 	.irq_set_wake		= imx_gpcv2_irq_set_wake,
 	.irq_retrigger		= irq_chip_retrigger_hierarchy,
+	.irq_set_type		= irq_chip_set_type_parent,
 #ifdef CONFIG_SMP
 	.irq_set_affinity	= irq_chip_set_affinity_parent,
 #endif
-- 
2.20.1

[PATCH 4.9 070/103] perf header: Fix divide by zero error if f_header.attr_size==0

[Greg Kroah-Hartman]

[ Upstream commit 7622236ceb167aa3857395f9bdaf871442aa467e ]

So I have been having lots of trouble with hand-crafted perf.data files
causing segfaults and the like, so I have started fuzzing the perf tool.

First issue found:

If f_header.attr_size is 0 in the perf.data file, then perf will crash
with a divide-by-zero error.

Committer note:

Added a pr_err() to tell the user why the command failed.

Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1907231100440.14532@macbook-air
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/header.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index 283148104ffbe..693dcd4ea6a38 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -2854,6 +2854,13 @@ int perf_session__read_header(struct perf_session *session)
 			   file->path);
 	}
 
+	if (f_header.attr_size == 0) {
+		pr_err("ERROR: The %s file's attr size field is 0 which is unexpected.\n"
+		       "Was the 'perf record' command properly terminated?\n",
+		       file->path);
+		return -EINVAL;
+	}
+
 	nr_attrs = f_header.attrs.size / f_header.attr_size;
 	lseek(fd, f_header.attrs.offset, SEEK_SET);
 
-- 
2.20.1

[PATCH 4.9 071/103] perf header: Fix use of unitialized value warning

[Greg Kroah-Hartman]

[ Upstream commit 20f9781f491360e7459c589705a2e4b1f136bee9 ]

When building our local version of perf with MSAN (Memory Sanitizer) and
running the perf record command, MSAN throws a use of uninitialized
value warning in "tools/perf/util/util.c:333:6".

This warning stems from the "buf" variable being passed into "write".
It originated as the variable "ev" with the type union perf_event*
defined in the "perf_event__synthesize_attr" function in
"tools/perf/util/header.c".

In the "perf_event__synthesize_attr" function they allocate space with a malloc
call using ev, then go on to only assign some of the member variables before
passing "ev" on as a parameter to the "process" function therefore "ev"
contains uninitialized memory. Changing the malloc call to zalloc to initialize
all the members of "ev" which gets rid of the warning.

To reproduce this warning, build perf by running:
make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-fsanitize=memory\
 -fsanitize-memory-track-origins"

(Additionally, llvm might have to be installed and clang might have to
be specified as the compiler - export CC=/usr/bin/clang)

then running:
tools/perf/perf record -o - ls / | tools/perf/perf --no-pager annotate\
 -i - --stdio

Please see the cover letter for why false positive warnings may be
generated.

Signed-off-by: Numfor Mbiziwo-Tiapo <nums@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Drayton <mbd@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190724234500.253358-2-nums@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/header.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index 693dcd4ea6a38..61e3c482935ad 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -2943,7 +2943,7 @@ int perf_event__synthesize_attr(struct perf_tool *tool,
 	size += sizeof(struct perf_event_header);
 	size += ids * sizeof(u64);
 
-	ev = malloc(size);
+	ev = zalloc(size);
 
 	if (ev == NULL)
 		return -ENOMEM;
-- 
2.20.1

[PATCH 4.9 072/103] libata: zpodd: Fix small read overflow in zpodd_get_mech_type()

[Greg Kroah-Hartman]

[ Upstream commit 71d6c505b4d9e6f76586350450e785e3d452b346 ]

Jeffrin reported a KASAN issue:

  BUG: KASAN: global-out-of-bounds in ata_exec_internal_sg+0x50f/0xc70
  Read of size 16 at addr ffffffff91f41f80 by task scsi_eh_1/149
  ...
  The buggy address belongs to the variable:
    cdb.48319+0x0/0x40

Much like commit 18c9a99bce2a ("libata: zpodd: small read overflow in
eject_tray()"), this fixes a cdb[] buffer length, this time in
zpodd_get_mech_type():

We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be
ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes.

Reported-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Fixes: afe759511808c ("libata: identify and init ZPODD devices")
Link: https://lore.kernel.org/lkml/201907181423.E808958@keescook/
Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/libata-zpodd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/libata-zpodd.c b/drivers/ata/libata-zpodd.c
index 7017a81d53cf2..083856272e92a 100644
--- a/drivers/ata/libata-zpodd.c
+++ b/drivers/ata/libata-zpodd.c
@@ -55,7 +55,7 @@ static enum odd_mech_type zpodd_get_mech_type(struct ata_device *dev)
 	unsigned int ret;
 	struct rm_feature_desc *desc;
 	struct ata_taskfile tf;
-	static const char cdb[] = {  GPCMD_GET_CONFIGURATION,
+	static const char cdb[ATAPI_CDB_LEN] = {  GPCMD_GET_CONFIGURATION,
 			2,      /* only 1 feature descriptor requested */
 			0, 3,   /* 3, removable medium feature */
 			0, 0, 0,/* reserved */
-- 
2.20.1

[PATCH 4.9 073/103] scsi: hpsa: correct scsi command status issue after reset

[Greg Kroah-Hartman]

[ Upstream commit eeebce1862970653cdf5c01e98bc669edd8f529a ]

Reviewed-by: Bader Ali - Saleh <bader.alisaleh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/hpsa.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 9f98c7211ec24..b82df8cdf9626 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -2236,6 +2236,8 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h,
 	case IOACCEL2_SERV_RESPONSE_COMPLETE:
 		switch (c2->error_data.status) {
 		case IOACCEL2_STATUS_SR_TASK_COMP_GOOD:
+			if (cmd)
+				cmd->result = 0;
 			break;
 		case IOACCEL2_STATUS_SR_TASK_COMP_CHK_COND:
 			cmd->result |= SAM_STAT_CHECK_CONDITION;
@@ -2423,8 +2425,10 @@ static void process_ioaccel2_completion(struct ctlr_info *h,
 
 	/* check for good status */
 	if (likely(c2->error_data.serv_response == 0 &&
-			c2->error_data.status == 0))
+			c2->error_data.status == 0)) {
+		cmd->result = 0;
 		return hpsa_cmd_free_and_done(h, c, cmd);
+	}
 
 	/*
 	 * Any RAID offload error results in retry which will use
@@ -5511,6 +5515,12 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
 	}
 	c = cmd_tagged_alloc(h, cmd);
 
+	/*
+	 * This is necessary because the SML doesn't zero out this field during
+	 * error recovery.
+	 */
+	cmd->result = 0;
+
 	/*
 	 * Call alternate submit routine for I/O accelerated commands.
 	 * Retries always go down the normal I/O path.
-- 
2.20.1

[PATCH 4.9 074/103] ata: libahci: do not complain in case of deferred probe

[Greg Kroah-Hartman]

[ Upstream commit 090bb803708198e5ab6b0046398c7ed9f4d12d6b ]

Retrieving PHYs can defer the probe, do not spawn an error when
-EPROBE_DEFER is returned, it is normal behavior.

Fixes: b1a9edbda040 ("ata: libahci: allow to use multiple PHYs")
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/libahci_platform.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index cd2eab6aa92ea..65371e1befe8a 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -300,6 +300,9 @@ static int ahci_platform_get_phy(struct ahci_host_priv *hpriv, u32 port,
 		hpriv->phys[port] = NULL;
 		rc = 0;
 		break;
+	case -EPROBE_DEFER:
+		/* Do not complain yet */
+		break;
 
 	default:
 		dev_err(dev,
-- 
2.20.1

[PATCH 4.9 075/103] kbuild: modpost: handle KBUILD_EXTRA_SYMBOLS only for external modules

[Greg Kroah-Hartman]

[ Upstream commit cb4819934a7f9b87876f11ed05b8624c0114551b ]

KBUILD_EXTRA_SYMBOLS makes sense only when building external modules.
Moreover, the modpost sets 'external_module' if the -e option is given.

I replaced $(patsubst %, -e %,...) with simpler $(addprefix -e,...)
while I was here.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/Makefile.modpost | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index 16923ba4b5b10..8cb7971b3f25c 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -74,7 +74,7 @@ modpost = scripts/mod/modpost                    \
  $(if $(CONFIG_MODULE_SRCVERSION_ALL),-a,)       \
  $(if $(KBUILD_EXTMOD),-i,-o) $(kernelsymfile)   \
  $(if $(KBUILD_EXTMOD),-I $(modulesymfile))      \
- $(if $(KBUILD_EXTRA_SYMBOLS), $(patsubst %, -e %,$(KBUILD_EXTRA_SYMBOLS))) \
+ $(if $(KBUILD_EXTMOD),$(addprefix -e ,$(KBUILD_EXTRA_SYMBOLS))) \
  $(if $(KBUILD_EXTMOD),-o $(modulesymfile))      \
  $(if $(CONFIG_DEBUG_SECTION_MISMATCH),,-S)      \
  $(if $(CONFIG_SECTION_MISMATCH_WARN_ONLY),,-E)  \
-- 
2.20.1

[PATCH 4.9 076/103] arm64/efi: fix variable si set but not used

[Greg Kroah-Hartman]

[ Upstream commit f1d4836201543e88ebe70237e67938168d5fab19 ]

GCC throws out this warning on arm64.

drivers/firmware/efi/libstub/arm-stub.c: In function 'efi_entry':
drivers/firmware/efi/libstub/arm-stub.c:132:22: warning: variable 'si'
set but not used [-Wunused-but-set-variable]

Fix it by making free_screen_info() a static inline function.

Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/efi.h | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h
index 65615820155e6..65db124a44bff 100644
--- a/arch/arm64/include/asm/efi.h
+++ b/arch/arm64/include/asm/efi.h
@@ -52,7 +52,11 @@ int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md);
 #define efi_is_64bit()			(true)
 
 #define alloc_screen_info(x...)		&screen_info
-#define free_screen_info(x...)
+
+static inline void free_screen_info(efi_system_table_t *sys_table_arg,
+				    struct screen_info *si)
+{
+}
 
 /* redeclare as 'hidden' so the compiler will generate relative references */
 extern struct screen_info screen_info __attribute__((__visibility__("hidden")));
-- 
2.20.1

[PATCH 4.9 077/103] arm64/mm: fix variable pud set but not used

[Greg Kroah-Hartman]

[ Upstream commit 7d4e2dcf311d3b98421d1f119efe5964cafa32fc ]

GCC throws a warning,

arch/arm64/mm/mmu.c: In function 'pud_free_pmd_page':
arch/arm64/mm/mmu.c:1033:8: warning: variable 'pud' set but not used
[-Wunused-but-set-variable]
  pud_t pud;
        ^~~

because pud_table() is a macro and compiled away. Fix it by making it a
static inline function and for pud_sect() as well.

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/pgtable.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 73e3718356b05..edb2c359480db 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -387,8 +387,8 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 				 PMD_TYPE_SECT)
 
 #if defined(CONFIG_ARM64_64K_PAGES) || CONFIG_PGTABLE_LEVELS < 3
-#define pud_sect(pud)		(0)
-#define pud_table(pud)		(1)
+static inline bool pud_sect(pud_t pud) { return false; }
+static inline bool pud_table(pud_t pud) { return true; }
 #else
 #define pud_sect(pud)		((pud_val(pud) & PUD_TYPE_MASK) == \
 				 PUD_TYPE_SECT)
-- 
2.20.1

[PATCH 4.9 078/103] IB/core: Add mitigation for Spectre V1

[Greg Kroah-Hartman]

[ Upstream commit 61f259821dd3306e49b7d42a3f90fb5a4ff3351b ]

Some processors may mispredict an array bounds check and
speculatively access memory that they should not. With
a user supplied array index we like to play things safe
by masking the value with the array size before it is
used as an index.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20190731043957.GA1600@agluck-desk2.amr.corp.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/user_mad.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
index 415a3185cde7f..cf93a96b63249 100644
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -49,6 +49,7 @@
 #include <linux/sched.h>
 #include <linux/semaphore.h>
 #include <linux/slab.h>
+#include <linux/nospec.h>
 
 #include <asm/uaccess.h>
 
@@ -843,11 +844,14 @@ static int ib_umad_unreg_agent(struct ib_umad_file *file, u32 __user *arg)
 
 	if (get_user(id, arg))
 		return -EFAULT;
+	if (id >= IB_UMAD_MAX_AGENTS)
+		return -EINVAL;
 
 	mutex_lock(&file->port->file_mutex);
 	mutex_lock(&file->mutex);
 
-	if (id >= IB_UMAD_MAX_AGENTS || !__get_agent(file, id)) {
+	id = array_index_nospec(id, IB_UMAD_MAX_AGENTS);
+	if (!__get_agent(file, id)) {
 		ret = -EINVAL;
 		goto out;
 	}
-- 
2.20.1

[PATCH 4.9 079/103] IB/mad: Fix use-after-free in ib mad completion handling

[Greg Kroah-Hartman]

[ Upstream commit 770b7d96cfff6a8bf6c9f261ba6f135dc9edf484 ]

We encountered a use-after-free bug when unloading the driver:

[ 3562.116059] BUG: KASAN: use-after-free in ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.117233] Read of size 4 at addr ffff8882ca5aa868 by task kworker/u13:2/23862
[ 3562.118385]
[ 3562.119519] CPU: 2 PID: 23862 Comm: kworker/u13:2 Tainted: G           OE     5.1.0-for-upstream-dbg-2019-05-19_16-44-30-13 #1
[ 3562.121806] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[ 3562.123075] Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
[ 3562.124383] Call Trace:
[ 3562.125640]  dump_stack+0x9a/0xeb
[ 3562.126911]  print_address_description+0xe3/0x2e0
[ 3562.128223]  ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.129545]  __kasan_report+0x15c/0x1df
[ 3562.130866]  ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.132174]  kasan_report+0xe/0x20
[ 3562.133514]  ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.134835]  ? find_mad_agent+0xa00/0xa00 [ib_core]
[ 3562.136158]  ? qlist_free_all+0x51/0xb0
[ 3562.137498]  ? mlx4_ib_sqp_comp_worker+0x1970/0x1970 [mlx4_ib]
[ 3562.138833]  ? quarantine_reduce+0x1fa/0x270
[ 3562.140171]  ? kasan_unpoison_shadow+0x30/0x40
[ 3562.141522]  ib_mad_recv_done+0xdf6/0x3000 [ib_core]
[ 3562.142880]  ? _raw_spin_unlock_irqrestore+0x46/0x70
[ 3562.144277]  ? ib_mad_send_done+0x1810/0x1810 [ib_core]
[ 3562.145649]  ? mlx4_ib_destroy_cq+0x2a0/0x2a0 [mlx4_ib]
[ 3562.147008]  ? _raw_spin_unlock_irqrestore+0x46/0x70
[ 3562.148380]  ? debug_object_deactivate+0x2b9/0x4a0
[ 3562.149814]  __ib_process_cq+0xe2/0x1d0 [ib_core]
[ 3562.151195]  ib_cq_poll_work+0x45/0xf0 [ib_core]
[ 3562.152577]  process_one_work+0x90c/0x1860
[ 3562.153959]  ? pwq_dec_nr_in_flight+0x320/0x320
[ 3562.155320]  worker_thread+0x87/0xbb0
[ 3562.156687]  ? __kthread_parkme+0xb6/0x180
[ 3562.158058]  ? process_one_work+0x1860/0x1860
[ 3562.159429]  kthread+0x320/0x3e0
[ 3562.161391]  ? kthread_park+0x120/0x120
[ 3562.162744]  ret_from_fork+0x24/0x30
...
[ 3562.187615] Freed by task 31682:
[ 3562.188602]  save_stack+0x19/0x80
[ 3562.189586]  __kasan_slab_free+0x11d/0x160
[ 3562.190571]  kfree+0xf5/0x2f0
[ 3562.191552]  ib_mad_port_close+0x200/0x380 [ib_core]
[ 3562.192538]  ib_mad_remove_device+0xf0/0x230 [ib_core]
[ 3562.193538]  remove_client_context+0xa6/0xe0 [ib_core]
[ 3562.194514]  disable_device+0x14e/0x260 [ib_core]
[ 3562.195488]  __ib_unregister_device+0x79/0x150 [ib_core]
[ 3562.196462]  ib_unregister_device+0x21/0x30 [ib_core]
[ 3562.197439]  mlx4_ib_remove+0x162/0x690 [mlx4_ib]
[ 3562.198408]  mlx4_remove_device+0x204/0x2c0 [mlx4_core]
[ 3562.199381]  mlx4_unregister_interface+0x49/0x1d0 [mlx4_core]
[ 3562.200356]  mlx4_ib_cleanup+0xc/0x1d [mlx4_ib]
[ 3562.201329]  __x64_sys_delete_module+0x2d2/0x400
[ 3562.202288]  do_syscall_64+0x95/0x470
[ 3562.203277]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

The problem was that the MAD PD was deallocated before the MAD CQ.
There was completion work pending for the CQ when the PD got deallocated.
When the mad completion handling reached procedure
ib_mad_post_receive_mads(), we got a use-after-free bug in the following
line of code in that procedure:
   sg_list.lkey = qp_info->port_priv->pd->local_dma_lkey;
(the pd pointer in the above line is no longer valid, because the
pd has been deallocated).

We fix this by allocating the PD before the CQ in procedure
ib_mad_port_open(), and deallocating the PD after freeing the CQ
in procedure ib_mad_port_close().

Since the CQ completion work queue is flushed during ib_free_cq(),
no completions will be pending for that CQ when the PD is later
deallocated.

Note that freeing the CQ before deallocating the PD is the practice
in the ULPs.

Fixes: 4be90bc60df4 ("IB/mad: Remove ib_get_dma_mr calls")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190801121449.24973-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/mad.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index 3e2ab04201e2c..25a28e7060725 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -3155,18 +3155,18 @@ static int ib_mad_port_open(struct ib_device *device,
 	if (has_smi)
 		cq_size *= 2;
 
+	port_priv->pd = ib_alloc_pd(device, 0);
+	if (IS_ERR(port_priv->pd)) {
+		dev_err(&device->dev, "Couldn't create ib_mad PD\n");
+		ret = PTR_ERR(port_priv->pd);
+		goto error3;
+	}
+
 	port_priv->cq = ib_alloc_cq(port_priv->device, port_priv, cq_size, 0,
 			IB_POLL_WORKQUEUE);
 	if (IS_ERR(port_priv->cq)) {
 		dev_err(&device->dev, "Couldn't create ib_mad CQ\n");
 		ret = PTR_ERR(port_priv->cq);
-		goto error3;
-	}
-
-	port_priv->pd = ib_alloc_pd(device, 0);
-	if (IS_ERR(port_priv->pd)) {
-		dev_err(&device->dev, "Couldn't create ib_mad PD\n");
-		ret = PTR_ERR(port_priv->pd);
 		goto error4;
 	}
 
@@ -3209,11 +3209,11 @@ error8:
 error7:
 	destroy_mad_qp(&port_priv->qp_info[0]);
 error6:
-	ib_dealloc_pd(port_priv->pd);
-error4:
 	ib_free_cq(port_priv->cq);
 	cleanup_recv_queue(&port_priv->qp_info[1]);
 	cleanup_recv_queue(&port_priv->qp_info[0]);
+error4:
+	ib_dealloc_pd(port_priv->pd);
 error3:
 	kfree(port_priv);
 
@@ -3243,8 +3243,8 @@ static int ib_mad_port_close(struct ib_device *device, int port_num)
 	destroy_workqueue(port_priv->wq);
 	destroy_mad_qp(&port_priv->qp_info[1]);
 	destroy_mad_qp(&port_priv->qp_info[0]);
-	ib_dealloc_pd(port_priv->pd);
 	ib_free_cq(port_priv->cq);
+	ib_dealloc_pd(port_priv->pd);
 	cleanup_recv_queue(&port_priv->qp_info[1]);
 	cleanup_recv_queue(&port_priv->qp_info[0]);
 	/* XXX: Handle deallocation of MAD registration tables */
-- 
2.20.1

[PATCH 4.9 080/103] ocfs2: remove set but not used variable last_hash

[Greg Kroah-Hartman]

[ Upstream commit 7bc36e3ce91471b6377c8eadc0a2f220a2280083 ]

Fixes gcc '-Wunused-but-set-variable' warning:

  fs/ocfs2/xattr.c: In function ocfs2_xattr_bucket_find:
  fs/ocfs2/xattr.c:3828:6: warning: variable last_hash set but not used [-Wunused-but-set-variable]

It's never used and can be removed.

Link: http://lkml.kernel.org/r/20190716132110.34836-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/xattr.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index 01932763b4d10..e108c945ac1f8 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -3832,7 +3832,6 @@ static int ocfs2_xattr_bucket_find(struct inode *inode,
 	u16 blk_per_bucket = ocfs2_blocks_per_xattr_bucket(inode->i_sb);
 	int low_bucket = 0, bucket, high_bucket;
 	struct ocfs2_xattr_bucket *search;
-	u32 last_hash;
 	u64 blkno, lower_blkno = 0;
 
 	search = ocfs2_xattr_bucket_new(inode);
@@ -3876,8 +3875,6 @@ static int ocfs2_xattr_bucket_find(struct inode *inode,
 		if (xh->xh_count)
 			xe = &xh->xh_entries[le16_to_cpu(xh->xh_count) - 1];
 
-		last_hash = le32_to_cpu(xe->xe_name_hash);
-
 		/* record lower_blkno which may be the insert place. */
 		lower_blkno = blkno;
 
-- 
2.20.1

[PATCH 4.9 081/103] staging: comedi: dt3000: Fix signed integer overflow divider * base

[Greg Kroah-Hartman]

From: Ian Abbott <abbotti@mev.co.uk>

commit b4d98bc3fc93ec3a58459948a2c0e0c9b501cd88 upstream.

In `dt3k_ns_to_timer()` the following lines near the end of the function
result in a signed integer overflow:

	prescale = 15;
	base = timer_base * (1 << prescale);
	divider = 65535;
	*nanosec = divider * base;

(`divider`, `base` and `prescale` are type `int`, `timer_base` and
`*nanosec` are type `unsigned int`.  The value of `timer_base` will be
either 50 or 100.)

The main reason for the overflow is that the calculation for `base` is
completely wrong.  It should be:

	base = timer_base * (prescale + 1);

which matches an earlier instance of this calculation in the same
function.

Reported-by: David Binderman <dcb314@hotmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20190812111517.26803-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/comedi/drivers/dt3000.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/comedi/drivers/dt3000.c
+++ b/drivers/staging/comedi/drivers/dt3000.c
@@ -377,7 +377,7 @@ static int dt3k_ns_to_timer(unsigned int
 	}
 
 	prescale = 15;
-	base = timer_base * (1 << prescale);
+	base = timer_base * (prescale + 1);
 	divider = 65535;
 	*nanosec = divider * base;
 	return (prescale << 16) | (divider);

[PATCH 4.9 082/103] staging: comedi: dt3000: Fix rounding up of timer divisor

[Greg Kroah-Hartman]

From: Ian Abbott <abbotti@mev.co.uk>

commit 8e2a589a3fc36ce858d42e767c3bcd8fc62a512b upstream.

`dt3k_ns_to_timer()` determines the prescaler and divisor to use to
produce a desired timing period.  It is influenced by a rounding mode
and can round the divisor up, down, or to the nearest value.  However,
the code for rounding up currently does the same as rounding down!  Fix
ir by using the `DIV_ROUND_UP()` macro to calculate the divisor when
rounding up.

Also, change the types of the `divider`, `base` and `prescale` variables
from `int` to `unsigned int` to avoid mixing signed and unsigned types
in the calculations.

Also fix a typo in a nearby comment: "improvment" => "improvement".

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190812120814.21188-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/comedi/drivers/dt3000.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/staging/comedi/drivers/dt3000.c
+++ b/drivers/staging/comedi/drivers/dt3000.c
@@ -351,9 +351,9 @@ static irqreturn_t dt3k_interrupt(int ir
 static int dt3k_ns_to_timer(unsigned int timer_base, unsigned int *nanosec,
 			    unsigned int flags)
 {
-	int divider, base, prescale;
+	unsigned int divider, base, prescale;
 
-	/* This function needs improvment */
+	/* This function needs improvement */
 	/* Don't know if divider==0 works. */
 
 	for (prescale = 0; prescale < 16; prescale++) {
@@ -367,7 +367,7 @@ static int dt3k_ns_to_timer(unsigned int
 			divider = (*nanosec) / base;
 			break;
 		case CMDF_ROUND_UP:
-			divider = (*nanosec) / base;
+			divider = DIV_ROUND_UP(*nanosec, base);
 			break;
 		}
 		if (divider < 65536) {

[PATCH 4.9 083/103] USB: core: Fix races in character device registration and deregistraion

[Greg Kroah-Hartman]

From: Alan Stern <stern@rowland.harvard.edu>

commit 303911cfc5b95d33687d9046133ff184cf5043ff upstream.

The syzbot fuzzer has found two (!) races in the USB character device
registration and deregistration routines.  This patch fixes the races.

The first race results from the fact that usb_deregister_dev() sets
usb_minors[intf->minor] to NULL before calling device_destroy() on the
class device.  This leaves a window during which another thread can
allocate the same minor number but will encounter a duplicate name
error when it tries to register its own class device.  A typical error
message in the system log would look like:

    sysfs: cannot create duplicate filename '/class/usbmisc/ldusb0'

The patch fixes this race by destroying the class device first.

The second race is in usb_register_dev().  When that routine runs, it
first allocates a minor number, then drops minor_rwsem, and then
creates the class device.  If the device creation fails, the minor
number is deallocated and the whole routine returns an error.  But
during the time while minor_rwsem was dropped, there is a window in
which the minor number is allocated and so another thread can
successfully open the device file.  Typically this results in
use-after-free errors or invalid accesses when the other thread closes
its open file reference, because the kernel then tries to release
resources that were already deallocated when usb_register_dev()
failed.  The patch fixes this race by keeping minor_rwsem locked
throughout the entire routine.

Reported-and-tested-by: syzbot+30cf45ebfe0b0c4847a1@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1908121607590.1659-100000@iolanthe.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/file.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -191,9 +191,10 @@ int usb_register_dev(struct usb_interfac
 		intf->minor = minor;
 		break;
 	}
-	up_write(&minor_rwsem);
-	if (intf->minor < 0)
+	if (intf->minor < 0) {
+		up_write(&minor_rwsem);
 		return -EXFULL;
+	}
 
 	/* create a usb class device for this usb interface */
 	snprintf(name, sizeof(name), class_driver->name, minor - minor_base);
@@ -201,12 +202,11 @@ int usb_register_dev(struct usb_interfac
 				      MKDEV(USB_MAJOR, minor), class_driver,
 				      "%s", kbasename(name));
 	if (IS_ERR(intf->usb_dev)) {
-		down_write(&minor_rwsem);
 		usb_minors[minor] = NULL;
 		intf->minor = -1;
-		up_write(&minor_rwsem);
 		retval = PTR_ERR(intf->usb_dev);
 	}
+	up_write(&minor_rwsem);
 	return retval;
 }
 EXPORT_SYMBOL_GPL(usb_register_dev);
@@ -232,12 +232,12 @@ void usb_deregister_dev(struct usb_inter
 		return;
 
 	dev_dbg(&intf->dev, "removing %d minor\n", intf->minor);
+	device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor));
 
 	down_write(&minor_rwsem);
 	usb_minors[intf->minor] = NULL;
 	up_write(&minor_rwsem);
 
-	device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor));
 	intf->usb_dev = NULL;
 	intf->minor = -1;
 	destroy_usb_class();

[PATCH 4.9 084/103] usb: cdc-acm: make sure a refcount is taken early enough

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit c52873e5a1ef72f845526d9f6a50704433f9c625 upstream.

destroy() will decrement the refcount on the interface, so that
it needs to be taken so early that it never undercounts.

Fixes: 7fb57a019f94e ("USB: cdc-acm: Fix potential deadlock (lockdep warning)")
Cc: stable <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+1b2449b7b5dc240d107a@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20190808142119.7998-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/cdc-acm.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1264,10 +1264,6 @@ made_compressed_probe:
 	if (acm == NULL)
 		goto alloc_fail;
 
-	minor = acm_alloc_minor(acm);
-	if (minor < 0)
-		goto alloc_fail1;
-
 	ctrlsize = usb_endpoint_maxp(epctrl);
 	readsize = usb_endpoint_maxp(epread) *
 				(quirks == SINGLE_RX_URB ? 1 : 2);
@@ -1275,6 +1271,13 @@ made_compressed_probe:
 	acm->writesize = usb_endpoint_maxp(epwrite) * 20;
 	acm->control = control_interface;
 	acm->data = data_interface;
+
+	usb_get_intf(acm->control); /* undone in destruct() */
+
+	minor = acm_alloc_minor(acm);
+	if (minor < 0)
+		goto alloc_fail1;
+
 	acm->minor = minor;
 	acm->dev = usb_dev;
 	if (h.usb_cdc_acm_descriptor)
@@ -1420,7 +1423,6 @@ skip_countries:
 	usb_driver_claim_interface(&acm_driver, data_interface, acm);
 	usb_set_intfdata(data_interface, acm);
 
-	usb_get_intf(control_interface);
 	tty_dev = tty_port_register_device(&acm->port, acm_tty_driver, minor,
 			&control_interface->dev);
 	if (IS_ERR(tty_dev)) {

[PATCH 4.9 085/103] USB: CDC: fix sanity checks in CDC union parser

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit 54364278fb3cabdea51d6398b07c87415065b3fc upstream.

A few checks checked for the size of the pointer to a structure
instead of the structure itself. Copy & paste issue presumably.

Fixes: e4c6fb7794982 ("usbnet: move the CDC parser into USB core")
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot+45a53506b65321c1fe91@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20190813093541.18889-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/message.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -2142,14 +2142,14 @@ int cdc_parse_cdc_header(struct usb_cdc_
 				(struct usb_cdc_dmm_desc *)buffer;
 			break;
 		case USB_CDC_MDLM_TYPE:
-			if (elength < sizeof(struct usb_cdc_mdlm_desc *))
+			if (elength < sizeof(struct usb_cdc_mdlm_desc))
 				goto next_desc;
 			if (desc)
 				return -EINVAL;
 			desc = (struct usb_cdc_mdlm_desc *)buffer;
 			break;
 		case USB_CDC_MDLM_DETAIL_TYPE:
-			if (elength < sizeof(struct usb_cdc_mdlm_detail_desc *))
+			if (elength < sizeof(struct usb_cdc_mdlm_detail_desc))
 				goto next_desc;
 			if (detail)
 				return -EINVAL;

[PATCH 4.9 086/103] USB: serial: option: add D-Link DWM-222 device ID

[Greg Kroah-Hartman]

From: Rogan Dawes <rogan@dawes.za.net>

commit 552573e42aab5f75aff9bab855a9677979d9a7d5 upstream.

Add device id for D-Link DWM-222 A2.

MI_00 D-Link HS-USB Diagnostics
MI_01 D-Link HS-USB Modem
MI_02 D-Link HS-USB AT Port
MI_03 D-Link HS-USB NMEA
MI_04 D-Link HS-USB WWAN Adapter (qmi_wwan)
MI_05 USB Mass Storage Device

Cc: stable@vger.kernel.org
Signed-off-by: Rogan Dawes <rogan@dawes.za.net>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1949,6 +1949,8 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e35, 0xff),			/* D-Link DWM-222 */
 	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e3d, 0xff),			/* D-Link DWM-222 A2 */
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) },	/* D-Link DWM-152/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) },	/* D-Link DWM-156/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) },	/* D-Link DWM-156/A3 */

[PATCH 4.9 087/103] USB: serial: option: Add support for ZTE MF871A

[Greg Kroah-Hartman]

From: Yoshiaki Okamoto <yokamoto@allied-telesis.co.jp>

commit 7e7ae38bf928c5cfa6dd6e9a2cf8b42c84a27c92 upstream.

This patch adds support for MF871A USB modem (aka Speed USB STICK U03)
to option driver. This modem is manufactured by ZTE corporation, and
sold by KDDI.

Interface layout:
0: AT
1: MODEM

usb-devices output:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  9 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=1481 Rev=52.87
S:  Manufacturer=ZTE,Incorporated
S:  Product=ZTE Technologies MSM
S:  SerialNumber=1234567890ABCDEF
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option

Co-developed-by: Hiroyuki Yamamoto <hyamamo@allied-telesis.co.jp>
Signed-off-by: Hiroyuki Yamamoto <hyamamo@allied-telesis.co.jp>
Signed-off-by: Yoshiaki Okamoto <yokamoto@allied-telesis.co.jp>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1544,6 +1544,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff),  /* Telewell TW-LTE 4G v2 */
 	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x1476, 0xff) },	/* GosunCn ZTE WeLink ME3630 (ECM/NCM mode) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1481, 0xff, 0x00, 0x00) }, /* ZTE MF871A */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) },

[PATCH 4.9 088/103] USB: serial: option: add the BroadMobi BM818 card

[Greg Kroah-Hartman]

From: Bob Ham <bob.ham@puri.sm>

commit e5d8badf37e6b547842f2fcde10361b29e08bd36 upstream.

Add a VID:PID for the BroadMobi BM818 M.2 card

T:  Bus=01 Lev=03 Prnt=40 Port=03 Cnt=01 Dev#= 44 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2020 ProdID=2060 Rev=00.00
S:  Manufacturer=Qualcomm, Incorporated
S:  Product=Qualcomm CDMA Technologies MSM
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

Signed-off-by: Bob Ham <bob.ham@puri.sm>
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: stable <stable@vger.kernel.org>
[ johan: use USB_DEVICE_INTERFACE_CLASS() ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1957,6 +1957,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) },	/* D-Link DWM-156/A3 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff),			/* Olicard 600 */
 	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2060, 0xff),			/* BroadMobi BM818 */
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) },			/* OLICARD300 - MT6225 */
 	{ USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) },
 	{ USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) },

[PATCH 4.9 089/103] USB: serial: option: Add Motorola modem UARTs

[Greg Kroah-Hartman]

From: Tony Lindgren <tony@atomide.com>

commit 6caf0be40a707689e8ff8824fdb96ef77685b1ba upstream.

On Motorola Mapphone devices such as Droid 4 there are five USB ports
that do not use the same layout as Gobi 1K/2K/etc devices listed in
qcserial.c. So we should use qcaux.c or option.c as noted by
Dan Williams <dan.j.williams@intel.com>.

As the Motorola USB serial ports have an interrupt endpoint as shown
with lsusb -v, we should use option.c instead of qcaux.c as pointed out
by Johan Hovold <johan@kernel.org>.

The ff/ff/ff interfaces seem to always be UARTs on Motorola devices.
For the other interfaces, class 0x0a (CDC Data) should not in general
be added as they are typically part of a multi-interface function as
noted earlier by Bjørn Mork <bjorn@mork.no>.

However, looking at the Motorola mapphone kernel code, the mdm6600 0x0a
class is only used for flashing the modem firmware, and there are no
other interfaces. So I've added that too with more details below as it
works just fine.

The ttyUSB ports on Droid 4 are:

ttyUSB0 DIAG, CQDM-capable
ttyUSB1 MUX or NMEA, no response
ttyUSB2 MUX or NMEA, no response
ttyUSB3 TCMD
ttyUSB4 AT-capable

The ttyUSB0 is detected as QCDM capable by ModemManager. I think
it's only used for debugging with ModemManager --debug for sending
custom AT commands though. ModemManager already can manage data
connection using the USB QMI ports that are already handled by the
qmi_wwan.c driver.

To enable the MUX or NMEA ports, it seems that something needs to be
done additionally to enable them, maybe via the DIAG or TCMD port.
It might be just a NVRAM setting somewhere, but I have no idea what
NVRAM settings may need changing for that.

The TCMD port seems to be a Motorola custom protocol for testing
the modem and to configure it's NVRAM and seems to work just fine
based on a quick test with a minimal tcmdrw tool I wrote.

The voice modem AT-capable port seems to provide only partial
support, and no PM support compared to the TS 27.010 based UART
wired directly to the modem.

The UARTs added with this change are the same product IDs as the
Motorola Mapphone Android Linux kernel mdm6600_id_table. I don't
have any mdm9600 based devices, so I have only tested these on
mdm6600 based droid 4.

Then for the class 0x0a (CDC Data) mode, the Motorola Mapphone Android
Linux kernel driver moto_flashqsc.c just seems to change the
port->bulk_out_size to 8K from the default. And is only used for
flashing the modem firmware it seems.

I've verified that flashing the modem with signed firmware works just
fine with the option driver after manually toggling the GPIO pins, so
I've added droid 4 modem flashing mode to the option driver. I've not
added the other devices listed in moto_flashqsc.c in case they really
need different port->bulk_out_size. Those can be added as they get
tested to work for flashing the modem.

After this patch the output of /sys/kernel/debug/usb/devices has
the following for normal 22b8:2a70 mode including the related qmi_wwan
interfaces:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22b8 ProdID=2a70 Rev= 0.00
S:  Manufacturer=Motorola, Incorporated
S:  Product=Flash MZ600
C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=5ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=5ms
E:  Ad=88(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
E:  Ad=89(I) Atr=03(Int.) MxPS=  64 Ivl=5ms
E:  Ad=8a(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
E:  Ad=8b(I) Atr=03(Int.) MxPS=  64 Ivl=5ms
E:  Ad=8c(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=08(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
E:  Ad=8d(I) Atr=03(Int.) MxPS=  64 Ivl=5ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=09(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

In 22b8:900e "qc_dload" mode the device shows up as:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22b8 ProdID=900e Rev= 0.00
S:  Manufacturer=Motorola, Incorporated
S:  Product=Flash MZ600
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

And in 22b8:4281 "ram_downloader" mode the device shows up as:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22b8 ProdID=4281 Rev= 0.00
S:  Manufacturer=Motorola, Incorporated
S:  Product=Flash MZ600
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=fc Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

Cc: Bjørn Mork <bjorn@mork.no>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Lars Melin <larsm17@gmail.com>
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Scott <hashcode0f@gmail.com>
Cc: NeKit <nekit1000@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -967,6 +967,11 @@ static const struct usb_device_id option
 	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7B) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7C) },
 
+	/* Motorola devices */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x2a70, 0xff, 0xff, 0xff) },	/* mdm6600 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x2e0a, 0xff, 0xff, 0xff) },	/* mdm9600 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x4281, 0x0a, 0x00, 0xfc) },	/* mdm ram dl */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x900e, 0xff, 0xff, 0xff) },	/* mdm qc dl */
 
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) },

[PATCH 4.9 090/103] asm-generic: fix -Wtype-limits compiler warnings

[Greg Kroah-Hartman]

[ Upstream commit cbedfe11347fe418621bd188d58a206beb676218 ]

Commit d66acc39c7ce ("bitops: Optimise get_order()") introduced a
compilation warning because "rx_frag_size" is an "ushort" while
PAGE_SHIFT here is 16.

The commit changed the get_order() to be a multi-line macro where
compilers insist to check all statements in the macro even when
__builtin_constant_p(rx_frag_size) will return false as "rx_frag_size"
is a module parameter.

In file included from ./arch/powerpc/include/asm/page_64.h:107,
                 from ./arch/powerpc/include/asm/page.h:242,
                 from ./arch/powerpc/include/asm/mmu.h:132,
                 from ./arch/powerpc/include/asm/lppaca.h:47,
                 from ./arch/powerpc/include/asm/paca.h:17,
                 from ./arch/powerpc/include/asm/current.h:13,
                 from ./include/linux/thread_info.h:21,
                 from ./arch/powerpc/include/asm/processor.h:39,
                 from ./include/linux/prefetch.h:15,
                 from drivers/net/ethernet/emulex/benet/be_main.c:14:
drivers/net/ethernet/emulex/benet/be_main.c: In function 'be_rx_cqs_create':
./include/asm-generic/getorder.h:54:9: warning: comparison is always
true due to limited range of data type [-Wtype-limits]
   (((n) < (1UL << PAGE_SHIFT)) ? 0 :  \
         ^
drivers/net/ethernet/emulex/benet/be_main.c:3138:33: note: in expansion
of macro 'get_order'
  adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE;
                                 ^~~~~~~~~

Fix it by moving all of this multi-line macro into a proper function,
and killing __get_order() off.

[akpm@linux-foundation.org: remove __get_order() altogether]
[cai@lca.pw: v2]
  Link: http://lkml.kernel.org/r/1564000166-31428-1-git-send-email-cai@lca.pw
Link: http://lkml.kernel.org/r/1563914986-26502-1-git-send-email-cai@lca.pw
Fixes: d66acc39c7ce ("bitops: Optimise get_order()")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: James Y Knight <jyknight@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/asm-generic/getorder.h | 50 ++++++++++++++--------------------
 1 file changed, 20 insertions(+), 30 deletions(-)

diff --git a/include/asm-generic/getorder.h b/include/asm-generic/getorder.h
index 65e4468ac53da..52fbf236a90ea 100644
--- a/include/asm-generic/getorder.h
+++ b/include/asm-generic/getorder.h
@@ -6,24 +6,6 @@
 #include <linux/compiler.h>
 #include <linux/log2.h>
 
-/*
- * Runtime evaluation of get_order()
- */
-static inline __attribute_const__
-int __get_order(unsigned long size)
-{
-	int order;
-
-	size--;
-	size >>= PAGE_SHIFT;
-#if BITS_PER_LONG == 32
-	order = fls(size);
-#else
-	order = fls64(size);
-#endif
-	return order;
-}
-
 /**
  * get_order - Determine the allocation order of a memory size
  * @size: The size for which to get the order
@@ -42,19 +24,27 @@ int __get_order(unsigned long size)
  * to hold an object of the specified size.
  *
  * The result is undefined if the size is 0.
- *
- * This function may be used to initialise variables with compile time
- * evaluations of constants.
  */
-#define get_order(n)						\
-(								\
-	__builtin_constant_p(n) ? (				\
-		((n) == 0UL) ? BITS_PER_LONG - PAGE_SHIFT :	\
-		(((n) < (1UL << PAGE_SHIFT)) ? 0 :		\
-		 ilog2((n) - 1) - PAGE_SHIFT + 1)		\
-	) :							\
-	__get_order(n)						\
-)
+static inline __attribute_const__ int get_order(unsigned long size)
+{
+	if (__builtin_constant_p(size)) {
+		if (!size)
+			return BITS_PER_LONG - PAGE_SHIFT;
+
+		if (size < (1UL << PAGE_SHIFT))
+			return 0;
+
+		return ilog2((size) - 1) - PAGE_SHIFT + 1;
+	}
+
+	size--;
+	size >>= PAGE_SHIFT;
+#if BITS_PER_LONG == 32
+	return fls(size);
+#else
+	return fls64(size);
+#endif
+}
 
 #endif	/* __ASSEMBLY__ */
 
-- 
2.20.1

[PATCH 4.9 091/103] bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K

[Greg Kroah-Hartman]

[ Upstream commit fdadd04931c2d7cd294dc5b2b342863f94be53a3 ]

Michael and Sandipan report:

  Commit ede95a63b5 introduced a bpf_jit_limit tuneable to limit BPF
  JIT allocations. At compile time it defaults to PAGE_SIZE * 40000,
  and is adjusted again at init time if MODULES_VADDR is defined.

  For ppc64 kernels, MODULES_VADDR isn't defined, so we're stuck with
  the compile-time default at boot-time, which is 0x9c400000 when
  using 64K page size. This overflows the signed 32-bit bpf_jit_limit
  value:

  root@ubuntu:/tmp# cat /proc/sys/net/core/bpf_jit_limit
  -1673527296

  and can cause various unexpected failures throughout the network
  stack. In one case `strace dhclient eth0` reported:

  setsockopt(5, SOL_SOCKET, SO_ATTACH_FILTER, {len=11, filter=0x105dd27f8},
             16) = -1 ENOTSUPP (Unknown error 524)

  and similar failures can be seen with tools like tcpdump. This doesn't
  always reproduce however, and I'm not sure why. The more consistent
  failure I've seen is an Ubuntu 18.04 KVM guest booted on a POWER9
  host would time out on systemd/netplan configuring a virtio-net NIC
  with no noticeable errors in the logs.

Given this and also given that in near future some architectures like
arm64 will have a custom area for BPF JIT image allocations we should
get rid of the BPF_JIT_LIMIT_DEFAULT fallback / default entirely. For
4.21, we have an overridable bpf_jit_alloc_exec(), bpf_jit_free_exec()
so therefore add another overridable bpf_jit_alloc_exec_limit() helper
function which returns the possible size of the memory area for deriving
the default heuristic in bpf_jit_charge_init().

Like bpf_jit_alloc_exec() and bpf_jit_free_exec(), the new
bpf_jit_alloc_exec_limit() assumes that module_alloc() is the default
JIT memory provider, and therefore in case archs implement their custom
module_alloc() we use MODULES_{END,_VADDR} for limits and otherwise for
vmalloc_exec() cases like on ppc64 we use VMALLOC_{END,_START}.

Additionally, for archs supporting large page sizes, we should change
the sysctl to be handled as long to not run into sysctl restrictions
in future.

Fixes: ede95a63b5e8 ("bpf: add bpf_jit_limit knob to restrict unpriv allocations")
Reported-by: Sandipan Das <sandipan@linux.ibm.com>
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/filter.h     |  2 +-
 kernel/bpf/core.c          | 21 +++++++++++++++------
 net/core/sysctl_net_core.c | 20 +++++++++++++++++---
 3 files changed, 33 insertions(+), 10 deletions(-)

diff --git a/include/linux/filter.h b/include/linux/filter.h
index 689bba1020079..0837d904405a3 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -599,7 +599,7 @@ void bpf_warn_invalid_xdp_action(u32 act);
 #ifdef CONFIG_BPF_JIT
 extern int bpf_jit_enable;
 extern int bpf_jit_harden;
-extern int bpf_jit_limit;
+extern long bpf_jit_limit;
 
 typedef void (*bpf_jit_fill_hole_t)(void *area, unsigned int size);
 
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index 09df9bbfb48ed..df2ebce927ec4 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -208,25 +208,34 @@ struct bpf_prog *bpf_patch_insn_single(struct bpf_prog *prog, u32 off,
 }
 
 #ifdef CONFIG_BPF_JIT
-# define BPF_JIT_LIMIT_DEFAULT	(PAGE_SIZE * 40000)
-
 /* All BPF JIT sysctl knobs here. */
 int bpf_jit_enable   __read_mostly = IS_BUILTIN(CONFIG_BPF_JIT_ALWAYS_ON);
 int bpf_jit_harden   __read_mostly;
-int bpf_jit_limit    __read_mostly = BPF_JIT_LIMIT_DEFAULT;
+long bpf_jit_limit   __read_mostly;
 
 static atomic_long_t bpf_jit_current;
 
+/* Can be overridden by an arch's JIT compiler if it has a custom,
+ * dedicated BPF backend memory area, or if neither of the two
+ * below apply.
+ */
+u64 __weak bpf_jit_alloc_exec_limit(void)
+{
 #if defined(MODULES_VADDR)
+	return MODULES_END - MODULES_VADDR;
+#else
+	return VMALLOC_END - VMALLOC_START;
+#endif
+}
+
 static int __init bpf_jit_charge_init(void)
 {
 	/* Only used as heuristic here to derive limit. */
-	bpf_jit_limit = min_t(u64, round_up((MODULES_END - MODULES_VADDR) >> 2,
-					    PAGE_SIZE), INT_MAX);
+	bpf_jit_limit = min_t(u64, round_up(bpf_jit_alloc_exec_limit() >> 2,
+					    PAGE_SIZE), LONG_MAX);
 	return 0;
 }
 pure_initcall(bpf_jit_charge_init);
-#endif
 
 static int bpf_jit_charge_modmem(u32 pages)
 {
diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c
index 58d76ca459377..a6fc82704f0c1 100644
--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -28,6 +28,8 @@ static int two __maybe_unused = 2;
 static int min_sndbuf = SOCK_MIN_SNDBUF;
 static int min_rcvbuf = SOCK_MIN_RCVBUF;
 static int max_skb_frags = MAX_SKB_FRAGS;
+static long long_one __maybe_unused = 1;
+static long long_max __maybe_unused = LONG_MAX;
 
 static int net_msg_warn;	/* Unused, but still a sysctl */
 
@@ -263,6 +265,17 @@ proc_dointvec_minmax_bpf_restricted(struct ctl_table *table, int write,
 
 	return proc_dointvec_minmax(table, write, buffer, lenp, ppos);
 }
+
+static int
+proc_dolongvec_minmax_bpf_restricted(struct ctl_table *table, int write,
+				     void __user *buffer, size_t *lenp,
+				     loff_t *ppos)
+{
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	return proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
+}
 #endif
 
 static struct ctl_table net_core_table[] = {
@@ -349,10 +362,11 @@ static struct ctl_table net_core_table[] = {
 	{
 		.procname	= "bpf_jit_limit",
 		.data		= &bpf_jit_limit,
-		.maxlen		= sizeof(int),
+		.maxlen		= sizeof(long),
 		.mode		= 0600,
-		.proc_handler	= proc_dointvec_minmax_bpf_restricted,
-		.extra1		= &one,
+		.proc_handler	= proc_dolongvec_minmax_bpf_restricted,
+		.extra1		= &long_one,
+		.extra2		= &long_max,
 	},
 #endif
 	{
-- 
2.20.1

[PATCH 4.9 092/103] arm64: compat: Allow single-byte watchpoints on all addresses

[Greg Kroah-Hartman]

From: Will Deacon <will@kernel.org>

commit 849adec41203ac5837c40c2d7e08490ffdef3c2c upstream.

Commit d968d2b801d8 ("ARM: 7497/1: hw_breakpoint: allow single-byte
watchpoints on all addresses") changed the validation requirements for
hardware watchpoints on arch/arm/. Update our compat layer to implement
the same relaxation.

Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/kernel/hw_breakpoint.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/arch/arm64/kernel/hw_breakpoint.c
+++ b/arch/arm64/kernel/hw_breakpoint.c
@@ -508,13 +508,14 @@ int arch_validate_hwbkpt_settings(struct
 			/* Aligned */
 			break;
 		case 1:
-			/* Allow single byte watchpoint. */
-			if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
-				break;
 		case 2:
 			/* Allow halfword watchpoints and breakpoints. */
 			if (info->ctrl.len == ARM_BREAKPOINT_LEN_2)
 				break;
+		case 3:
+			/* Allow single byte watchpoint. */
+			if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
+				break;
 		default:
 			return -EINVAL;
 		}

[PATCH 4.9 093/103] netfilter: conntrack: Use consistent ct id hash calculation

[Greg Kroah-Hartman]

From: Dirk Morris <dmorris@metaloft.com>

commit 656c8e9cc1badbc18eefe6ba01d33ebbcae61b9a upstream.

Change ct id hash calculation to only use invariants.

Currently the ct id hash calculation is based on some fields that can
change in the lifetime on a conntrack entry in some corner cases. The
current hash uses the whole tuple which contains an hlist pointer which
will change when the conntrack is placed on the dying list resulting in
a ct id change.

This patch also removes the reply-side tuple and extension pointer from
the hash calculation so that the ct id will will not change from
initialization until confirmation.

Fixes: 3c79107631db1f7 ("netfilter: ctnetlink: don't use conntrack/expect object addresses as id")
Signed-off-by: Dirk Morris <dmorris@metaloft.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/nf_conntrack_core.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -308,13 +308,12 @@ EXPORT_SYMBOL_GPL(nf_ct_invert_tuple);
  * table location, we assume id gets exposed to userspace.
  *
  * Following nf_conn items do not change throughout lifetime
- * of the nf_conn after it has been committed to main hash table:
+ * of the nf_conn:
  *
  * 1. nf_conn address
- * 2. nf_conn->ext address
- * 3. nf_conn->master address (normally NULL)
- * 4. tuple
- * 5. the associated net namespace
+ * 2. nf_conn->master address (normally NULL)
+ * 3. the associated net namespace
+ * 4. the original direction tuple
  */
 u32 nf_ct_get_id(const struct nf_conn *ct)
 {
@@ -324,9 +323,10 @@ u32 nf_ct_get_id(const struct nf_conn *c
 	net_get_random_once(&ct_id_seed, sizeof(ct_id_seed));
 
 	a = (unsigned long)ct;
-	b = (unsigned long)ct->master ^ net_hash_mix(nf_ct_net(ct));
-	c = (unsigned long)ct->ext;
-	d = (unsigned long)siphash(&ct->tuplehash, sizeof(ct->tuplehash),
+	b = (unsigned long)ct->master;
+	c = (unsigned long)nf_ct_net(ct);
+	d = (unsigned long)siphash(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple,
+				   sizeof(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple),
 				   &ct_id_seed);
 #ifdef CONFIG_64BIT
 	return siphash_4u64((u64)a, (u64)b, (u64)c, (u64)d, &ct_id_seed);

[PATCH 4.9 094/103] Input: psmouse - fix build error of multiple definition

[Greg Kroah-Hartman]

From: YueHaibing <yuehaibing@huawei.com>

commit 49e6979e7e92cf496105b5636f1df0ac17c159c0 upstream.

trackpoint_detect() should be static inline while
CONFIG_MOUSE_PS2_TRACKPOINT is not set, otherwise, we build fails:

drivers/input/mouse/alps.o: In function `trackpoint_detect':
alps.c:(.text+0x8e00): multiple definition of `trackpoint_detect'
drivers/input/mouse/psmouse-base.o:psmouse-base.c:(.text+0x1b50): first defined here

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 55e3d9224b60 ("Input: psmouse - allow disabing certain protocol extensions")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/mouse/trackpoint.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/input/mouse/trackpoint.h
+++ b/drivers/input/mouse/trackpoint.h
@@ -153,7 +153,8 @@ struct trackpoint_data
 #ifdef CONFIG_MOUSE_PS2_TRACKPOINT
 int trackpoint_detect(struct psmouse *psmouse, bool set_properties);
 #else
-inline int trackpoint_detect(struct psmouse *psmouse, bool set_properties)
+static inline int trackpoint_detect(struct psmouse *psmouse,
+				    bool set_properties)
 {
 	return -ENOSYS;
 }

[PATCH 4.9 095/103] iommu/amd: Move iommu_init_pci() to .init section

[Greg Kroah-Hartman]

From: Joerg Roedel <jroedel@suse.de>

commit 24d2c521749d8547765b555b7a85cca179bb2275 upstream.

The function is only called from another __init function, so
it should be moved to .init too.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/amd_iommu_init.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -1534,7 +1534,7 @@ static const struct attribute_group *amd
 	NULL,
 };
 
-static int iommu_init_pci(struct amd_iommu *iommu)
+static int __init iommu_init_pci(struct amd_iommu *iommu)
 {
 	int cap_ptr = iommu->cap_ptr;
 	u32 range, misc, low, high;

[PATCH 4.9 096/103] bnx2x: Fix VFs VLAN reconfiguration in reload.

[Greg Kroah-Hartman]

From: Manish Chopra <manishc@marvell.com>

[ Upstream commit 4a4d2d372fb9b9229327e2ed01d5d9572eddf4de ]

Commit 04f05230c5c13 ("bnx2x: Remove configured vlans as
part of unload sequence."), introduced a regression in driver
that as a part of VF's reload flow, VLANs created on the VF
doesn't get re-configured in hardware as vlan metadata/info
was not getting cleared for the VFs which causes vlan PING to stop.

This patch clears the vlan metadata/info so that VLANs gets
re-configured back in the hardware in VF's reload flow and
PING/traffic continues for VLANs created over the VFs.

Fixes: 04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence.")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com>
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c  |    7 ++++---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h  |    2 ++
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c |   17 ++++++++++++-----
 3 files changed, 18 insertions(+), 8 deletions(-)

--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -3062,12 +3062,13 @@ int bnx2x_nic_unload(struct bnx2x *bp, i
 	/* if VF indicate to PF this function is going down (PF will delete sp
 	 * elements and clear initializations
 	 */
-	if (IS_VF(bp))
+	if (IS_VF(bp)) {
+		bnx2x_clear_vlan_info(bp);
 		bnx2x_vfpf_close_vf(bp);
-	else if (unload_mode != UNLOAD_RECOVERY)
+	} else if (unload_mode != UNLOAD_RECOVERY) {
 		/* if this is a normal/close unload need to clean up chip*/
 		bnx2x_chip_cleanup(bp, unload_mode, keep_link);
-	else {
+	} else {
 		/* Send the UNLOAD_REQUEST to the MCP */
 		bnx2x_send_unload_req(bp, unload_mode);
 
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -425,6 +425,8 @@ void bnx2x_set_reset_global(struct bnx2x
 void bnx2x_disable_close_the_gate(struct bnx2x *bp);
 int bnx2x_init_hw_func_cnic(struct bnx2x *bp);
 
+void bnx2x_clear_vlan_info(struct bnx2x *bp);
+
 /**
  * bnx2x_sp_event - handle ramrods completion.
  *
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -8488,11 +8488,21 @@ int bnx2x_set_vlan_one(struct bnx2x *bp,
 	return rc;
 }
 
+void bnx2x_clear_vlan_info(struct bnx2x *bp)
+{
+	struct bnx2x_vlan_entry *vlan;
+
+	/* Mark that hw forgot all entries */
+	list_for_each_entry(vlan, &bp->vlan_reg, link)
+		vlan->hw = false;
+
+	bp->vlan_cnt = 0;
+}
+
 static int bnx2x_del_all_vlans(struct bnx2x *bp)
 {
 	struct bnx2x_vlan_mac_obj *vlan_obj = &bp->sp_objs[0].vlan_obj;
 	unsigned long ramrod_flags = 0, vlan_flags = 0;
-	struct bnx2x_vlan_entry *vlan;
 	int rc;
 
 	__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
@@ -8501,10 +8511,7 @@ static int bnx2x_del_all_vlans(struct bn
 	if (rc)
 		return rc;
 
-	/* Mark that hw forgot all entries */
-	list_for_each_entry(vlan, &bp->vlan_reg, link)
-		vlan->hw = false;
-	bp->vlan_cnt = 0;
+	bnx2x_clear_vlan_info(bp);
 
 	return 0;
 }

[PATCH 4.9 097/103] net/packet: fix race in tpacket_snd()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 32d3182cd2cd29b2e7e04df7b0db350fbe11289f ]

packet_sendmsg() checks tx_ring.pg_vec to decide
if it must call tpacket_snd().

Problem is that the check is lockless, meaning another thread
can issue a concurrent setsockopt(PACKET_TX_RING ) to flip
tx_ring.pg_vec back to NULL.

Given that tpacket_snd() grabs pg_vec_lock mutex, we can
perform the check again to solve the race.

syzbot reported :

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 11429 Comm: syz-executor394 Not tainted 5.3.0-rc4+ #101
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:packet_lookup_frame+0x8d/0x270 net/packet/af_packet.c:474
Code: c1 ee 03 f7 73 0c 80 3c 0e 00 0f 85 cb 01 00 00 48 8b 0b 89 c0 4c 8d 24 c1 48 b8 00 00 00 00 00 fc ff df 4c 89 e1 48 c1 e9 03 <80> 3c 01 00 0f 85 94 01 00 00 48 8d 7b 10 4d 8b 3c 24 48 b8 00 00
RSP: 0018:ffff88809f82f7b8 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffff8880a45c7030 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 1ffff110148b8e06 RDI: ffff8880a45c703c
RBP: ffff88809f82f7e8 R08: ffff888087aea200 R09: fffffbfff134ae50
R10: fffffbfff134ae4f R11: ffffffff89a5727f R12: 0000000000000000
R13: 0000000000000001 R14: ffff8880a45c6ac0 R15: 0000000000000000
FS:  00007fa04716f700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa04716edb8 CR3: 0000000091eb4000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 packet_current_frame net/packet/af_packet.c:487 [inline]
 tpacket_snd net/packet/af_packet.c:2667 [inline]
 packet_sendmsg+0x590/0x6250 net/packet/af_packet.c:2975
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:657
 ___sys_sendmsg+0x3e2/0x920 net/socket.c:2311
 __sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413
 __do_sys_sendmmsg net/socket.c:2442 [inline]
 __se_sys_sendmmsg net/socket.c:2439 [inline]
 __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439
 do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/packet/af_packet.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -2651,6 +2651,13 @@ static int tpacket_snd(struct packet_soc
 
 	mutex_lock(&po->pg_vec_lock);
 
+	/* packet_sendmsg() check on tx_ring.pg_vec was lockless,
+	 * we need to confirm it under protection of pg_vec_lock.
+	 */
+	if (unlikely(!po->tx_ring.pg_vec)) {
+		err = -EBUSY;
+		goto out;
+	}
 	if (likely(saddr == NULL)) {
 		dev	= packet_cached_dev_get(po);
 		proto	= po->num;

[PATCH 4.9 098/103] sctp: fix the transport error_count check

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit a1794de8b92ea6bc2037f445b296814ac826693e ]

As the annotation says in sctp_do_8_2_transport_strike():

  "If the transport error count is greater than the pf_retrans
   threshold, and less than pathmaxrtx ..."

It should be transport->error_count checked with pathmaxrxt,
instead of asoc->pf_retrans.

Fixes: 5aa93bcf66f4 ("sctp: Implement quick failover draft from tsvwg")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/sm_sideeffect.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -508,7 +508,7 @@ static void sctp_do_8_2_transport_strike
 	 */
 	if (net->sctp.pf_enable &&
 	   (transport->state == SCTP_ACTIVE) &&
-	   (asoc->pf_retrans < transport->pathmaxrxt) &&
+	   (transport->error_count < transport->pathmaxrxt) &&
 	   (transport->error_count > asoc->pf_retrans)) {
 
 		sctp_assoc_control_transport(asoc, transport,

[PATCH 4.9 099/103] xen/netback: Reset nr_frags before freeing skb

[Greg Kroah-Hartman]

From: Ross Lagerwall <ross.lagerwall@citrix.com>

[ Upstream commit 3a0233ddec554b886298de2428edb5c50a20e694 ]

At this point nr_frags has been incremented but the frag does not yet
have a page assigned so freeing the skb results in a crash. Reset
nr_frags before freeing the skb to prevent this.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/xen-netback/netback.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -927,6 +927,7 @@ static void xenvif_tx_build_gops(struct
 			skb_shinfo(skb)->nr_frags = MAX_SKB_FRAGS;
 			nskb = xenvif_alloc_skb(0);
 			if (unlikely(nskb == NULL)) {
+				skb_shinfo(skb)->nr_frags = 0;
 				kfree_skb(skb);
 				xenvif_tx_err(queue, &txreq, extra_count, idx);
 				if (net_ratelimit())
@@ -942,6 +943,7 @@ static void xenvif_tx_build_gops(struct
 
 			if (xenvif_set_skb_gso(queue->vif, skb, gso)) {
 				/* Failure in xenvif_set_skb_gso is fatal. */
+				skb_shinfo(skb)->nr_frags = 0;
 				kfree_skb(skb);
 				kfree_skb(nskb);
 				break;

[PATCH 4.9 100/103] net/mlx5e: Only support tx/rx pause setting for port owner

[Greg Kroah-Hartman]

From: Huy Nguyen <huyn@mellanox.com>

[ Upstream commit 466df6eb4a9e813b3cfc674363316450c57a89c5 ]

Only support changing tx/rx pause frame setting if the net device
is the vport group manager.

Fixes: 3c2d18ef22df ("net/mlx5e: Support ethtool get/set_pauseparam")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -1149,6 +1149,9 @@ static int mlx5e_set_pauseparam(struct n
 	struct mlx5_core_dev *mdev = priv->mdev;
 	int err;
 
+	if (!MLX5_CAP_GEN(mdev, vport_group_manager))
+		return -EOPNOTSUPP;
+
 	if (pauseparam->autoneg)
 		return -EINVAL;
 

[PATCH 4.9 101/103] net/mlx5e: Use flow keys dissector to parse packets for ARFS

[Greg Kroah-Hartman]

From: Maxim Mikityanskiy <maximmi@mellanox.com>

[ Upstream commit 405b93eb764367a670e729da18e54dc42db32620 ]

The current ARFS code relies on certain fields to be set in the SKB
(e.g. transport_header) and extracts IP addresses and ports by custom
code that parses the packet. The necessary SKB fields, however, are not
always set at that point, which leads to an out-of-bounds access. Use
skb_flow_dissect_flow_keys() to get the necessary information reliably,
fix the out-of-bounds access and reuse the code.

Fixes: 18c908e477dc ("net/mlx5e: Add accelerated RFS support")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c |   97 +++++++---------------
 1 file changed, 34 insertions(+), 63 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c
@@ -441,12 +441,6 @@ arfs_hash_bucket(struct arfs_table *arfs
 	return &arfs_t->rules_hash[bucket_idx];
 }
 
-static u8 arfs_get_ip_proto(const struct sk_buff *skb)
-{
-	return (skb->protocol == htons(ETH_P_IP)) ?
-		ip_hdr(skb)->protocol : ipv6_hdr(skb)->nexthdr;
-}
-
 static struct arfs_table *arfs_get_table(struct mlx5e_arfs_tables *arfs,
 					 u8 ip_proto, __be16 etype)
 {
@@ -605,31 +599,9 @@ out:
 	arfs_may_expire_flow(priv);
 }
 
-/* return L4 destination port from ip4/6 packets */
-static __be16 arfs_get_dst_port(const struct sk_buff *skb)
-{
-	char *transport_header;
-
-	transport_header = skb_transport_header(skb);
-	if (arfs_get_ip_proto(skb) == IPPROTO_TCP)
-		return ((struct tcphdr *)transport_header)->dest;
-	return ((struct udphdr *)transport_header)->dest;
-}
-
-/* return L4 source port from ip4/6 packets */
-static __be16 arfs_get_src_port(const struct sk_buff *skb)
-{
-	char *transport_header;
-
-	transport_header = skb_transport_header(skb);
-	if (arfs_get_ip_proto(skb) == IPPROTO_TCP)
-		return ((struct tcphdr *)transport_header)->source;
-	return ((struct udphdr *)transport_header)->source;
-}
-
 static struct arfs_rule *arfs_alloc_rule(struct mlx5e_priv *priv,
 					 struct arfs_table *arfs_t,
-					 const struct sk_buff *skb,
+					 const struct flow_keys *fk,
 					 u16 rxq, u32 flow_id)
 {
 	struct arfs_rule *rule;
@@ -644,19 +616,19 @@ static struct arfs_rule *arfs_alloc_rule
 	INIT_WORK(&rule->arfs_work, arfs_handle_work);
 
 	tuple = &rule->tuple;
-	tuple->etype = skb->protocol;
+	tuple->etype = fk->basic.n_proto;
+	tuple->ip_proto = fk->basic.ip_proto;
 	if (tuple->etype == htons(ETH_P_IP)) {
-		tuple->src_ipv4 = ip_hdr(skb)->saddr;
-		tuple->dst_ipv4 = ip_hdr(skb)->daddr;
+		tuple->src_ipv4 = fk->addrs.v4addrs.src;
+		tuple->dst_ipv4 = fk->addrs.v4addrs.dst;
 	} else {
-		memcpy(&tuple->src_ipv6, &ipv6_hdr(skb)->saddr,
+		memcpy(&tuple->src_ipv6, &fk->addrs.v6addrs.src,
 		       sizeof(struct in6_addr));
-		memcpy(&tuple->dst_ipv6, &ipv6_hdr(skb)->daddr,
+		memcpy(&tuple->dst_ipv6, &fk->addrs.v6addrs.dst,
 		       sizeof(struct in6_addr));
 	}
-	tuple->ip_proto = arfs_get_ip_proto(skb);
-	tuple->src_port = arfs_get_src_port(skb);
-	tuple->dst_port = arfs_get_dst_port(skb);
+	tuple->src_port = fk->ports.src;
+	tuple->dst_port = fk->ports.dst;
 
 	rule->flow_id = flow_id;
 	rule->filter_id = priv->fs.arfs.last_filter_id++ % RPS_NO_FILTER;
@@ -667,37 +639,33 @@ static struct arfs_rule *arfs_alloc_rule
 	return rule;
 }
 
-static bool arfs_cmp_ips(struct arfs_tuple *tuple,
-			 const struct sk_buff *skb)
+static bool arfs_cmp(const struct arfs_tuple *tuple, const struct flow_keys *fk)
 {
-	if (tuple->etype == htons(ETH_P_IP) &&
-	    tuple->src_ipv4 == ip_hdr(skb)->saddr &&
-	    tuple->dst_ipv4 == ip_hdr(skb)->daddr)
-		return true;
-	if (tuple->etype == htons(ETH_P_IPV6) &&
-	    (!memcmp(&tuple->src_ipv6, &ipv6_hdr(skb)->saddr,
-		     sizeof(struct in6_addr))) &&
-	    (!memcmp(&tuple->dst_ipv6, &ipv6_hdr(skb)->daddr,
-		     sizeof(struct in6_addr))))
-		return true;
+	if (tuple->src_port != fk->ports.src || tuple->dst_port != fk->ports.dst)
+		return false;
+	if (tuple->etype != fk->basic.n_proto)
+		return false;
+	if (tuple->etype == htons(ETH_P_IP))
+		return tuple->src_ipv4 == fk->addrs.v4addrs.src &&
+		       tuple->dst_ipv4 == fk->addrs.v4addrs.dst;
+	if (tuple->etype == htons(ETH_P_IPV6))
+		return !memcmp(&tuple->src_ipv6, &fk->addrs.v6addrs.src,
+			       sizeof(struct in6_addr)) &&
+		       !memcmp(&tuple->dst_ipv6, &fk->addrs.v6addrs.dst,
+			       sizeof(struct in6_addr));
 	return false;
 }
 
 static struct arfs_rule *arfs_find_rule(struct arfs_table *arfs_t,
-					const struct sk_buff *skb)
+					const struct flow_keys *fk)
 {
 	struct arfs_rule *arfs_rule;
 	struct hlist_head *head;
-	__be16 src_port = arfs_get_src_port(skb);
-	__be16 dst_port = arfs_get_dst_port(skb);
 
-	head = arfs_hash_bucket(arfs_t, src_port, dst_port);
+	head = arfs_hash_bucket(arfs_t, fk->ports.src, fk->ports.dst);
 	hlist_for_each_entry(arfs_rule, head, hlist) {
-		if (arfs_rule->tuple.src_port == src_port &&
-		    arfs_rule->tuple.dst_port == dst_port &&
-		    arfs_cmp_ips(&arfs_rule->tuple, skb)) {
+		if (arfs_cmp(&arfs_rule->tuple, fk))
 			return arfs_rule;
-		}
 	}
 
 	return NULL;
@@ -710,20 +678,24 @@ int mlx5e_rx_flow_steer(struct net_devic
 	struct mlx5e_arfs_tables *arfs = &priv->fs.arfs;
 	struct arfs_table *arfs_t;
 	struct arfs_rule *arfs_rule;
+	struct flow_keys fk;
+
+	if (!skb_flow_dissect_flow_keys(skb, &fk, 0))
+		return -EPROTONOSUPPORT;
 
-	if (skb->protocol != htons(ETH_P_IP) &&
-	    skb->protocol != htons(ETH_P_IPV6))
+	if (fk.basic.n_proto != htons(ETH_P_IP) &&
+	    fk.basic.n_proto != htons(ETH_P_IPV6))
 		return -EPROTONOSUPPORT;
 
 	if (skb->encapsulation)
 		return -EPROTONOSUPPORT;
 
-	arfs_t = arfs_get_table(arfs, arfs_get_ip_proto(skb), skb->protocol);
+	arfs_t = arfs_get_table(arfs, fk.basic.ip_proto, fk.basic.n_proto);
 	if (!arfs_t)
 		return -EPROTONOSUPPORT;
 
 	spin_lock_bh(&arfs->arfs_lock);
-	arfs_rule = arfs_find_rule(arfs_t, skb);
+	arfs_rule = arfs_find_rule(arfs_t, &fk);
 	if (arfs_rule) {
 		if (arfs_rule->rxq == rxq_index) {
 			spin_unlock_bh(&arfs->arfs_lock);
@@ -731,8 +703,7 @@ int mlx5e_rx_flow_steer(struct net_devic
 		}
 		arfs_rule->rxq = rxq_index;
 	} else {
-		arfs_rule = arfs_alloc_rule(priv, arfs_t, skb,
-					    rxq_index, flow_id);
+		arfs_rule = arfs_alloc_rule(priv, arfs_t, &fk, rxq_index, flow_id);
 		if (!arfs_rule) {
 			spin_unlock_bh(&arfs->arfs_lock);
 			return -ENOMEM;

[PATCH 4.9 102/103] team: Add vlan tx offload to hw_enc_features

[Greg Kroah-Hartman]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 227f2f030e28d8783c3d10ce70ff4ba79cad653f ]

We should also enable team's vlan tx offload in hw_enc_features,
pass the vlan packets to the slave devices with vlan tci, let the
slave handle vlan tunneling offload implementation.

Fixes: 3268e5cb494d ("team: Advertise tunneling offload features")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/team/team.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -1014,7 +1014,9 @@ static void ___team_compute_features(str
 	}
 
 	team->dev->vlan_features = vlan_features;
-	team->dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL;
+	team->dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL |
+				     NETIF_F_HW_VLAN_CTAG_TX |
+				     NETIF_F_HW_VLAN_STAG_TX;
 	team->dev->hard_header_len = max_hard_header_len;
 
 	team->dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;

[PATCH 4.9 103/103] bonding: Add vlan tx offload to hw_enc_features

[Greg Kroah-Hartman]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit d595b03de2cb0bdf9bcdf35ff27840cc3a37158f ]

As commit 30d8177e8ac7 ("bonding: Always enable vlan tx offload")
said, we should always enable bonding's vlan tx offload, pass the
vlan packets to the slave devices with vlan tci, let them to handle
vlan implementation.

Now if encapsulation protocols like VXLAN is used, skb->encapsulation
may be set, then the packet is passed to vlan device which based on
bonding device. However in netif_skb_features(), the check of
hw_enc_features:

	 if (skb->encapsulation)
                 features &= dev->hw_enc_features;

clears NETIF_F_HW_VLAN_CTAG_TX/NETIF_F_HW_VLAN_STAG_TX. This results
in same issue in commit 30d8177e8ac7 like this:

vlan_dev_hard_start_xmit
  -->dev_queue_xmit
    -->validate_xmit_skb
      -->netif_skb_features //NETIF_F_HW_VLAN_CTAG_TX is cleared
      -->validate_xmit_vlan
        -->__vlan_hwaccel_push_inside //skb->tci is cleared
...
 --> bond_start_xmit
   --> bond_xmit_hash //BOND_XMIT_POLICY_ENCAP34
     --> __skb_flow_dissect // nhoff point to IP header
        -->  case htons(ETH_P_8021Q)
             // skb_vlan_tag_present is false, so
             vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan),
             //vlan point to ip header wrongly

Fixes: b2a103e6d0af ("bonding: convert to ndo_fix_features")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/bonding/bond_main.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1107,7 +1107,9 @@ static void bond_compute_features(struct
 
 done:
 	bond_dev->vlan_features = vlan_features;
-	bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL;
+	bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL |
+				    NETIF_F_HW_VLAN_CTAG_TX |
+				    NETIF_F_HW_VLAN_STAG_TX;
 	bond_dev->hard_header_len = max_hard_header_len;
 	bond_dev->gso_max_segs = gso_max_segs;
 	netif_set_gso_max_size(bond_dev, gso_max_size);

Re: [PATCH 4.9 000/103] 4.9.190-stable review

[kernelci.org bot]

stable-rc/linux-4.9.y boot: 110 boots: 0 failed, 94 passed with 15 offline, 1 untried/unknown (v4.9.189-104-gfefc589434fc)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.9.y/kernel/v4.9.189-104-gfefc589434fc/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.9.y/kernel/v4.9.189-104-gfefc589434fc/

Tree: stable-rc
Branch: linux-4.9.y
Git Describe: v4.9.189-104-gfefc589434fc
Git Commit: fefc589434fcd4cf95d9dc24271b21e7913ef6e4
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 54 unique boards, 21 SoC families, 15 builds out of 197

Boot Regressions Detected:

arm:

    bcm2835_defconfig:
        gcc-8:
          bcm2835-rpi-b:
              lab-baylibre-seattle: failing since 1 day (last pass: v4.9.189-96-g4cd56b7fcd6f - first fail: v4.9.189-97-g6971d2d959e5)

    omap2plus_defconfig:
        gcc-8:
          am335x-boneblack:
              lab-drue: new failure (last pass: v4.9.189-105-g9c965ba1a288)

    sama5_defconfig:
        gcc-8:
          at91-sama5d4_xplained:
              lab-baylibre-seattle: failing since 1 day (last pass: v4.9.189-96-g4cd56b7fcd6f - first fail: v4.9.189-97-g6971d2d959e5)

    socfpga_defconfig:
        gcc-8:
          socfpga_cyclone5_de0_sockit:
              lab-baylibre-seattle: failing since 1 day (last pass: v4.9.189-96-g4cd56b7fcd6f - first fail: v4.9.189-97-g6971d2d959e5)

arm64:

    defconfig:
        gcc-8:
          apq8016-sbc:
              lab-baylibre-seattle: failing since 1 day (last pass: v4.9.189-96-g4cd56b7fcd6f - first fail: v4.9.189-97-g6971d2d959e5)
          juno-r2:
              lab-baylibre-seattle: failing since 1 day (last pass: v4.9.189-96-g4cd56b7fcd6f - first fail: v4.9.189-97-g6971d2d959e5)
          meson-gxbb-odroidc2:
              lab-baylibre-seattle: failing since 1 day (last pass: v4.9.189-96-g4cd56b7fcd6f - first fail: v4.9.189-97-g6971d2d959e5)

Offline Platforms:

arm64:

    defconfig:
        gcc-8
            apq8016-sbc: 1 offline lab
            juno-r2: 1 offline lab
            meson-gxbb-odroidc2: 1 offline lab

arm:

    sama5_defconfig:
        gcc-8
            at91-sama5d4_xplained: 1 offline lab

    sunxi_defconfig:
        gcc-8
            sun5i-r8-chip: 1 offline lab

    bcm2835_defconfig:
        gcc-8
            bcm2835-rpi-b: 1 offline lab

    multi_v7_defconfig:
        gcc-8
            alpine-db: 1 offline lab
            at91-sama5d4_xplained: 1 offline lab
            qcom-apq8064-cm-qs600: 1 offline lab
            qcom-apq8064-ifc6410: 1 offline lab
            socfpga_cyclone5_de0_sockit: 1 offline lab
            sun5i-r8-chip: 1 offline lab

    socfpga_defconfig:
        gcc-8
            socfpga_cyclone5_de0_sockit: 1 offline lab

    qcom_defconfig:
        gcc-8
            qcom-apq8064-cm-qs600: 1 offline lab
            qcom-apq8064-ifc6410: 1 offline lab

---
For more info write to <info@kernelci.org>

Re: [PATCH 4.9 000/103] 4.9.190-stable review

[Kevin Hilman]

[ removed stable lists, etc. ]

Guillaume,

The regression reporting looks strange here.  The headers shows zero
fails, but the email body reports several regressions detected.

What's up here?

Kevin


"kernelci.org bot" <bot@kernelci.org> writes:

> stable-rc/linux-4.9.y boot: 110 boots: 0 failed, 94 passed with 15 offline, 1 untried/unknown (v4.9.189-104-gfefc589434fc)
>
> Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.9.y/kernel/v4.9.189-104-gfefc589434fc/
> Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.9.y/kernel/v4.9.189-104-gfefc589434fc/
>
> Tree: stable-rc
> Branch: linux-4.9.y
> Git Describe: v4.9.189-104-gfefc589434fc
> Git Commit: fefc589434fcd4cf95d9dc24271b21e7913ef6e4
> Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> Tested: 54 unique boards, 21 SoC families, 15 builds out of 197
>
> Boot Regressions Detected:
>
> arm:
>
>     bcm2835_defconfig:
>         gcc-8:
>           bcm2835-rpi-b:
>               lab-baylibre-seattle: failing since 1 day (last pass: v4.9.189-96-g4cd56b7fcd6f - first fail: v4.9.189-97-g6971d2d959e5)
>
>     omap2plus_defconfig:
>         gcc-8:
>           am335x-boneblack:
>               lab-drue: new failure (last pass: v4.9.189-105-g9c965ba1a288)
>
>     sama5_defconfig:
>         gcc-8:
>           at91-sama5d4_xplained:
>               lab-baylibre-seattle: failing since 1 day (last pass: v4.9.189-96-g4cd56b7fcd6f - first fail: v4.9.189-97-g6971d2d959e5)
>
>     socfpga_defconfig:
>         gcc-8:
>           socfpga_cyclone5_de0_sockit:
>               lab-baylibre-seattle: failing since 1 day (last pass: v4.9.189-96-g4cd56b7fcd6f - first fail: v4.9.189-97-g6971d2d959e5)
>
> arm64:
>
>     defconfig:
>         gcc-8:
>           apq8016-sbc:
>               lab-baylibre-seattle: failing since 1 day (last pass: v4.9.189-96-g4cd56b7fcd6f - first fail: v4.9.189-97-g6971d2d959e5)
>           juno-r2:
>               lab-baylibre-seattle: failing since 1 day (last pass: v4.9.189-96-g4cd56b7fcd6f - first fail: v4.9.189-97-g6971d2d959e5)
>           meson-gxbb-odroidc2:
>               lab-baylibre-seattle: failing since 1 day (last pass: v4.9.189-96-g4cd56b7fcd6f - first fail: v4.9.189-97-g6971d2d959e5)
>
> Offline Platforms:
>
> arm64:
>
>     defconfig:
>         gcc-8
>             apq8016-sbc: 1 offline lab
>             juno-r2: 1 offline lab
>             meson-gxbb-odroidc2: 1 offline lab
>
> arm:
>
>     sama5_defconfig:
>         gcc-8
>             at91-sama5d4_xplained: 1 offline lab
>
>     sunxi_defconfig:
>         gcc-8
>             sun5i-r8-chip: 1 offline lab
>
>     bcm2835_defconfig:
>         gcc-8
>             bcm2835-rpi-b: 1 offline lab
>
>     multi_v7_defconfig:
>         gcc-8
>             alpine-db: 1 offline lab
>             at91-sama5d4_xplained: 1 offline lab
>             qcom-apq8064-cm-qs600: 1 offline lab
>             qcom-apq8064-ifc6410: 1 offline lab
>             socfpga_cyclone5_de0_sockit: 1 offline lab
>             sun5i-r8-chip: 1 offline lab
>
>     socfpga_defconfig:
>         gcc-8
>             socfpga_cyclone5_de0_sockit: 1 offline lab
>
>     qcom_defconfig:
>         gcc-8
>             qcom-apq8064-cm-qs600: 1 offline lab
>             qcom-apq8064-ifc6410: 1 offline lab
>
> ---
> For more info write to <info@kernelci.org>

Re: [PATCH 4.9 000/103] 4.9.190-stable review

[Jon Hunter]

On 22/08/2019 18:17, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.190 release.
> There are 103 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat 24 Aug 2019 05:15:44 PM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.190-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests for Tegra are passing ...

Test results for stable-v4.9:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    24 tests:	24 pass, 0 fail

Linux version:	4.9.190-rc1-g7a35fdc061cd
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.9 000/103] 4.9.190-stable review

[Jon Hunter]

On 22/08/2019 18:17, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.190 release.
> There are 103 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat 24 Aug 2019 05:15:44 PM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.190-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests for Tegra are passing ...

Test results for stable-v4.9:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    24 tests:	24 pass, 0 fail

Linux version:	4.9.190-rc1-g7a35fdc061cd
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.9 000/103] 4.9.190-stable review

[Guillaume Tucker]

On 22/08/2019 23:33, Kevin Hilman wrote:
> [ removed stable lists, etc. ]
> 
> Guillaume,
> 
> The regression reporting looks strange here.  The headers shows zero
> fails, but the email body reports several regressions detected.
> 
> What's up here?

I believe this falls into the category of regressions in the bug
report since we've added support for multiple compilers.  Matt is
on the case - does this look like a new, different problem?

Also note that bisections aren't run on stable-rc yet but if the
same regressions occur on stable then they should get bisected.

Guillaume

> "kernelci.org bot" <bot@kernelci.org> writes:
> 
>> stable-rc/linux-4.9.y boot: 110 boots: 0 failed, 94 passed with 15 offline, 1 untried/unknown (v4.9.189-104-gfefc589434fc)
>>
>> Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.9.y/kernel/v4.9.189-104-gfefc589434fc/
>> Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.9.y/kernel/v4.9.189-104-gfefc589434fc/
>>
>> Tree: stable-rc
>> Branch: linux-4.9.y
>> Git Describe: v4.9.189-104-gfefc589434fc
>> Git Commit: fefc589434fcd4cf95d9dc24271b21e7913ef6e4
>> Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
>> Tested: 54 unique boards, 21 SoC families, 15 builds out of 197
>>
>> Boot Regressions Detected:
>>
>> arm:
>>
>>     bcm2835_defconfig:
>>         gcc-8:
>>           bcm2835-rpi-b:
>>               lab-baylibre-seattle: failing since 1 day (last pass: v4.9.189-96-g4cd56b7fcd6f - first fail: v4.9.189-97-g6971d2d959e5)
>>
>>     omap2plus_defconfig:
>>         gcc-8:
>>           am335x-boneblack:
>>               lab-drue: new failure (last pass: v4.9.189-105-g9c965ba1a288)
>>
>>     sama5_defconfig:
>>         gcc-8:
>>           at91-sama5d4_xplained:
>>               lab-baylibre-seattle: failing since 1 day (last pass: v4.9.189-96-g4cd56b7fcd6f - first fail: v4.9.189-97-g6971d2d959e5)
>>
>>     socfpga_defconfig:
>>         gcc-8:
>>           socfpga_cyclone5_de0_sockit:
>>               lab-baylibre-seattle: failing since 1 day (last pass: v4.9.189-96-g4cd56b7fcd6f - first fail: v4.9.189-97-g6971d2d959e5)
>>
>> arm64:
>>
>>     defconfig:
>>         gcc-8:
>>           apq8016-sbc:
>>               lab-baylibre-seattle: failing since 1 day (last pass: v4.9.189-96-g4cd56b7fcd6f - first fail: v4.9.189-97-g6971d2d959e5)
>>           juno-r2:
>>               lab-baylibre-seattle: failing since 1 day (last pass: v4.9.189-96-g4cd56b7fcd6f - first fail: v4.9.189-97-g6971d2d959e5)
>>           meson-gxbb-odroidc2:
>>               lab-baylibre-seattle: failing since 1 day (last pass: v4.9.189-96-g4cd56b7fcd6f - first fail: v4.9.189-97-g6971d2d959e5)
>>
>> Offline Platforms:
>>
>> arm64:
>>
>>     defconfig:
>>         gcc-8
>>             apq8016-sbc: 1 offline lab
>>             juno-r2: 1 offline lab
>>             meson-gxbb-odroidc2: 1 offline lab
>>
>> arm:
>>
>>     sama5_defconfig:
>>         gcc-8
>>             at91-sama5d4_xplained: 1 offline lab
>>
>>     sunxi_defconfig:
>>         gcc-8
>>             sun5i-r8-chip: 1 offline lab
>>
>>     bcm2835_defconfig:
>>         gcc-8
>>             bcm2835-rpi-b: 1 offline lab
>>
>>     multi_v7_defconfig:
>>         gcc-8
>>             alpine-db: 1 offline lab
>>             at91-sama5d4_xplained: 1 offline lab
>>             qcom-apq8064-cm-qs600: 1 offline lab
>>             qcom-apq8064-ifc6410: 1 offline lab
>>             socfpga_cyclone5_de0_sockit: 1 offline lab
>>             sun5i-r8-chip: 1 offline lab
>>
>>     socfpga_defconfig:
>>         gcc-8
>>             socfpga_cyclone5_de0_sockit: 1 offline lab
>>
>>     qcom_defconfig:
>>         gcc-8
>>             qcom-apq8064-cm-qs600: 1 offline lab
>>             qcom-apq8064-ifc6410: 1 offline lab
>>
>> ---
>> For more info write to <info@kernelci.org>

Re: [PATCH 4.9 000/103] 4.9.190-stable review

[Naresh Kamboju]

On Thu, 22 Aug 2019 at 22:53, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.9.190 release.
> There are 103 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat 24 Aug 2019 05:15:44 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.190-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.9.190-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: 7a35fdc061cdc806d06bb3a34ed5c9c0d08ffc0d
git describe: v4.9.189-104-g7a35fdc061cd
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.189-104-g7a35fdc061cd


No regressions (compared to build v4.9.189)


No fixes (compared to build v4.9.189)

Ran 22554 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* ltp-syscalls-tests
* network-basic-tests
* ltp-open-posix-tests
* prep-tmp-disk
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
* ssuite
* v4l2-compliance

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.9 000/103] 4.9.190-stable review

[Guenter Roeck]

On Thu, Aug 22, 2019 at 10:17:48AM -0700, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.190 release.
> There are 103 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat 24 Aug 2019 05:15:44 PM UTC.
> Anything received after that time might be too late.
> 

Build results:
	total: 172 pass: 172 fail: 0
Qemu test results:
	total: 356 pass: 356 fail: 0

Guenter

Re: [PATCH 4.9 000/103] 4.9.190-stable review

[shuah]

On 8/22/19 11:17 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.190 release.
> There are 103 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat 24 Aug 2019 05:15:44 PM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.190-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah