* [GIT 00/19] Renesas ARM based SoC pinmux updates for v3.12
@ 2013-07-19 4:36 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:36 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit ad81f0545ef01ea651886dddac4bef6cec930092:
Linux 3.11-rc1 (2013-07-14 15:18:27 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-pinmux-for-v3.12
for you to fetch changes up to 838a7070ce8bfff11e19ed434edd9a4423b478bd:
ARM: shmobile: kzm9g-reference: Add LED1-LED4 to the device tree (2013-07-16 12:55:04 +0900)
----------------------------------------------------------------
Renesas ARM based SoC pinmux updates for v3.12
SH Mobile pinctrl DT support
----------------------------------------------------------------
Laurent Pinchart (19):
ARM: shmobile: r8a73a4: Add pin control device to device tree
ARM: shmobile: r8a7740: Add pin control device to device tree
ARM: shmobile: r8a7778: Add pin control device to device tree
ARM: shmobile: r8a7778: Add GPIO controller devices to device tree
ARM: shmobile: r8a7779: Add pin control device to device tree
ARM: shmobile: r8a7779: Add GPIO controller devices to device tree
ARM: shmobile: r8a7790: Add pin control device to device tree
ARM: shmobile: r8a7790: Add GPIO controller devices to device tree
ARM: shmobile: sh7372: Add pin control device to device tree
ARM: shmobile: sh73a0: Add pin control device to device tree
ARM: shmobile: armadillo-reference: Move pinctrl mappings to device tree
ARM: shmobile: armadillo-reference: Add st1232 pin mappings
ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DT
ARM: shmobile: armadillo-reference: Add LED1-LED4 to the device tree
ARM: shmobile: marzen-reference: Move pinctrl mappings to device tree
ARM: shmobile: marzen-reference: Add LED2-LED4 to the device tree
ARM: shmobile: kzm9g-reference: Move pinctrl mappings to device tree
ARM: shmobile: kzm9g-reference: Move SDHI regulators to DT
ARM: shmobile: kzm9g-reference: Add LED1-LED4 to the device tree
arch/arm/boot/dts/r8a73a4.dtsi | 88 +++++++++++++++++++
.../boot/dts/r8a7740-armadillo800eva-reference.dts | 34 ++++++++
arch/arm/boot/dts/r8a7740.dtsi | 8 ++
arch/arm/boot/dts/r8a7778.dtsi | 66 ++++++++++++++
arch/arm/boot/dts/r8a7779-marzen-reference.dts | 49 +++++++++++
arch/arm/boot/dts/r8a7779.dtsi | 90 ++++++++++++++++++++
arch/arm/boot/dts/r8a7790.dtsi | 78 +++++++++++++++++
arch/arm/boot/dts/sh7372.dtsi | 8 ++
arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 90 +++++++++++++++++++-
arch/arm/boot/dts/sh73a0.dtsi | 8 ++
.../board-armadillo800eva-reference.c | 18 +---
arch/arm/mach-shmobile/board-kzm9g-reference.c | 47 ----------
arch/arm/mach-shmobile/board-marzen-reference.c | 28 ------
13 files changed, 518 insertions(+), 94 deletions(-)
^ permalink raw reply [flat|nested] 50+ messages in thread
* [GIT 00/19] Renesas ARM based SoC pinmux updates for v3.12
@ 2013-07-19 4:36 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:36 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit ad81f0545ef01ea651886dddac4bef6cec930092:
Linux 3.11-rc1 (2013-07-14 15:18:27 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-pinmux-for-v3.12
for you to fetch changes up to 838a7070ce8bfff11e19ed434edd9a4423b478bd:
ARM: shmobile: kzm9g-reference: Add LED1-LED4 to the device tree (2013-07-16 12:55:04 +0900)
----------------------------------------------------------------
Renesas ARM based SoC pinmux updates for v3.12
SH Mobile pinctrl DT support
----------------------------------------------------------------
Laurent Pinchart (19):
ARM: shmobile: r8a73a4: Add pin control device to device tree
ARM: shmobile: r8a7740: Add pin control device to device tree
ARM: shmobile: r8a7778: Add pin control device to device tree
ARM: shmobile: r8a7778: Add GPIO controller devices to device tree
ARM: shmobile: r8a7779: Add pin control device to device tree
ARM: shmobile: r8a7779: Add GPIO controller devices to device tree
ARM: shmobile: r8a7790: Add pin control device to device tree
ARM: shmobile: r8a7790: Add GPIO controller devices to device tree
ARM: shmobile: sh7372: Add pin control device to device tree
ARM: shmobile: sh73a0: Add pin control device to device tree
ARM: shmobile: armadillo-reference: Move pinctrl mappings to device tree
ARM: shmobile: armadillo-reference: Add st1232 pin mappings
ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DT
ARM: shmobile: armadillo-reference: Add LED1-LED4 to the device tree
ARM: shmobile: marzen-reference: Move pinctrl mappings to device tree
ARM: shmobile: marzen-reference: Add LED2-LED4 to the device tree
ARM: shmobile: kzm9g-reference: Move pinctrl mappings to device tree
ARM: shmobile: kzm9g-reference: Move SDHI regulators to DT
ARM: shmobile: kzm9g-reference: Add LED1-LED4 to the device tree
arch/arm/boot/dts/r8a73a4.dtsi | 88 +++++++++++++++++++
.../boot/dts/r8a7740-armadillo800eva-reference.dts | 34 ++++++++
arch/arm/boot/dts/r8a7740.dtsi | 8 ++
arch/arm/boot/dts/r8a7778.dtsi | 66 ++++++++++++++
arch/arm/boot/dts/r8a7779-marzen-reference.dts | 49 +++++++++++
arch/arm/boot/dts/r8a7779.dtsi | 90 ++++++++++++++++++++
arch/arm/boot/dts/r8a7790.dtsi | 78 +++++++++++++++++
arch/arm/boot/dts/sh7372.dtsi | 8 ++
arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 90 +++++++++++++++++++-
arch/arm/boot/dts/sh73a0.dtsi | 8 ++
.../board-armadillo800eva-reference.c | 18 +---
arch/arm/mach-shmobile/board-kzm9g-reference.c | 47 ----------
arch/arm/mach-shmobile/board-marzen-reference.c | 28 ------
13 files changed, 518 insertions(+), 94 deletions(-)
^ permalink raw reply [flat|nested] 50+ messages in thread
* [PATCH 01/19] ARM: shmobile: r8a73a4: Add pin control device to device tree
2013-07-19 4:36 ` Simon Horman
@ 2013-07-19 4:36 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:36 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add a pfc node to the r8a73a4 device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a73a4.dtsi | 88 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 4ff2019..f1a35d5 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -85,4 +85,92 @@
interrupt-parent = <&gic>;
interrupts = <0 69 4>;
};
+
+ i2c0: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6500000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 174 0x4>;
+ };
+
+ i2c1: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6510000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 175 0x4>;
+ };
+
+ i2c2: i2c@e6520000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6520000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 176 0x4>;
+ };
+
+ i2c3: i2c@e6530000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6530000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 177 0x4>;
+ };
+
+ i2c4: i2c@e6540000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6540000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 178 0x4>;
+ };
+
+ i2c5: i2c@e60b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 179 0x4>;
+ };
+
+ i2c6: i2c@e6550000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6550000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 184 0x4>;
+ };
+
+ i2c7: i2c@e6560000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6560000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 185 0x4>;
+ };
+
+ i2c8: i2c@e6570000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6570000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 173 0x4>;
+ };
+
+ pfc: pfc@e6050000 {
+ compatible = "renesas,pfc-r8a73a4";
+ reg = <0xe6050000 0x9000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 01/19] ARM: shmobile: r8a73a4: Add pin control device to device tree
@ 2013-07-19 4:36 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:36 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add a pfc node to the r8a73a4 device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a73a4.dtsi | 88 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 4ff2019..f1a35d5 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -85,4 +85,92 @@
interrupt-parent = <&gic>;
interrupts = <0 69 4>;
};
+
+ i2c0: i2c at e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6500000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 174 0x4>;
+ };
+
+ i2c1: i2c at e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6510000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 175 0x4>;
+ };
+
+ i2c2: i2c at e6520000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6520000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 176 0x4>;
+ };
+
+ i2c3: i2c at e6530000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6530000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 177 0x4>;
+ };
+
+ i2c4: i2c at e6540000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6540000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 178 0x4>;
+ };
+
+ i2c5: i2c at e60b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 179 0x4>;
+ };
+
+ i2c6: i2c at e6550000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6550000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 184 0x4>;
+ };
+
+ i2c7: i2c at e6560000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6560000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 185 0x4>;
+ };
+
+ i2c8: i2c at e6570000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6570000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 173 0x4>;
+ };
+
+ pfc: pfc at e6050000 {
+ compatible = "renesas,pfc-r8a73a4";
+ reg = <0xe6050000 0x9000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 02/19] ARM: shmobile: r8a7740: Add pin control device to device tree
2013-07-19 4:36 ` Simon Horman
@ 2013-07-19 4:36 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:36 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add a pfc node to the r8a7740 device tree and remove manual pinmux
initialization from the corresponding board files.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7740.dtsi | 8 ++++++++
.../mach-shmobile/board-armadillo800eva-reference.c | 16 ++++++++--------
2 files changed, 16 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 24e9306..e18a195 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -139,4 +139,12 @@
0 72 0x4
0 73 0x4>;
};
+
+ pfc: pfc@e6050000 {
+ compatible = "renesas,pfc-r8a7740";
+ reg = <0xe6050000 0x8000>,
+ <0xe605800c 0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
index 03b85fe..f25b6aa 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
@@ -121,7 +121,7 @@
static const struct pinctrl_map eva_pinctrl_map[] = {
/* SCIFA1 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740",
+ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "e6050000.pfc",
"scifa1_data", "scifa1"),
};
@@ -170,22 +170,22 @@ static void __init eva_init(void)
eva_clock_init();
pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map));
- r8a7740_pinmux_init();
r8a7740_meram_workaround();
- /*
- * Touchscreen
- * TODO: Move reset GPIO over to .dts when we can reference it
- */
- gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
-
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 32K*8way */
l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
#endif
r8a7740_add_standard_devices_dt();
+
+ /*
+ * Touchscreen
+ * TODO: Move reset GPIO over to .dts when we can reference it
+ */
+ gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
+
r8a7740_pm_init();
}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 02/19] ARM: shmobile: r8a7740: Add pin control device to device tree
@ 2013-07-19 4:36 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:36 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add a pfc node to the r8a7740 device tree and remove manual pinmux
initialization from the corresponding board files.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7740.dtsi | 8 ++++++++
.../mach-shmobile/board-armadillo800eva-reference.c | 16 ++++++++--------
2 files changed, 16 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 24e9306..e18a195 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -139,4 +139,12 @@
0 72 0x4
0 73 0x4>;
};
+
+ pfc: pfc at e6050000 {
+ compatible = "renesas,pfc-r8a7740";
+ reg = <0xe6050000 0x8000>,
+ <0xe605800c 0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
index 03b85fe..f25b6aa 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
@@ -121,7 +121,7 @@
static const struct pinctrl_map eva_pinctrl_map[] = {
/* SCIFA1 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740",
+ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "e6050000.pfc",
"scifa1_data", "scifa1"),
};
@@ -170,22 +170,22 @@ static void __init eva_init(void)
eva_clock_init();
pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map));
- r8a7740_pinmux_init();
r8a7740_meram_workaround();
- /*
- * Touchscreen
- * TODO: Move reset GPIO over to .dts when we can reference it
- */
- gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
-
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 32K*8way */
l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
#endif
r8a7740_add_standard_devices_dt();
+
+ /*
+ * Touchscreen
+ * TODO: Move reset GPIO over to .dts when we can reference it
+ */
+ gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
+
r8a7740_pm_init();
}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 03/19] ARM: shmobile: r8a7778: Add pin control device to device tree
2013-07-19 4:36 ` Simon Horman
@ 2013-07-19 4:36 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:36 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add a pfc node to the r8a7778 device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7778.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 4743735..c8dbf14 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -32,4 +32,9 @@
reg = <0xfe438000 0x1000>,
<0xfe430000 0x100>;
};
+
+ pfc: pfc@fffc0000 {
+ compatible = "renesas,pfc-r8a7778";
+ reg = <0xfffc000 0x118>;
+ };
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 03/19] ARM: shmobile: r8a7778: Add pin control device to device tree
@ 2013-07-19 4:36 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:36 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add a pfc node to the r8a7778 device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7778.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 4743735..c8dbf14 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -32,4 +32,9 @@
reg = <0xfe438000 0x1000>,
<0xfe430000 0x100>;
};
+
+ pfc: pfc at fffc0000 {
+ compatible = "renesas,pfc-r8a7778";
+ reg = <0xfffc000 0x118>;
+ };
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 04/19] ARM: shmobile: r8a7778: Add GPIO controller devices to device tree
2013-07-19 4:36 ` Simon Horman
@ 2013-07-19 4:36 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:36 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add GPIO controller nodes to the r8a7778 core device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7778.dtsi | 61 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index c8dbf14..45ac404 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -33,8 +33,69 @@
<0xfe430000 0x100>;
};
+ gpio0: gpio@ffc40000 {
+ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+ reg = <0xffc40000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 103 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio1: gpio@ffc41000 {
+ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+ reg = <0xffc41000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 103 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio2: gpio@ffc42000 {
+ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+ reg = <0xffc42000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 103 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio3: gpio@ffc43000 {
+ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+ reg = <0xffc43000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 103 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio4: gpio@ffc44000 {
+ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+ reg = <0xffc44000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 103 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 27>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
pfc: pfc@fffc0000 {
compatible = "renesas,pfc-r8a7778";
reg = <0xfffc000 0x118>;
+ #gpio-range-cells = <3>;
};
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 04/19] ARM: shmobile: r8a7778: Add GPIO controller devices to device tree
@ 2013-07-19 4:36 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:36 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add GPIO controller nodes to the r8a7778 core device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7778.dtsi | 61 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index c8dbf14..45ac404 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -33,8 +33,69 @@
<0xfe430000 0x100>;
};
+ gpio0: gpio at ffc40000 {
+ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+ reg = <0xffc40000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 103 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio1: gpio at ffc41000 {
+ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+ reg = <0xffc41000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 103 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio2: gpio at ffc42000 {
+ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+ reg = <0xffc42000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 103 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio3: gpio at ffc43000 {
+ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+ reg = <0xffc43000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 103 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio4: gpio at ffc44000 {
+ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+ reg = <0xffc44000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 103 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 27>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
pfc: pfc at fffc0000 {
compatible = "renesas,pfc-r8a7778";
reg = <0xfffc000 0x118>;
+ #gpio-range-cells = <3>;
};
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 05/19] ARM: shmobile: r8a7779: Add pin control device to device tree
2013-07-19 4:36 ` Simon Horman
@ 2013-07-19 4:36 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:36 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add a pfc node to the r8a7779 device tree and remove manual pinmux
initialization from the corresponding board files.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779.dtsi | 5 +++++
arch/arm/mach-shmobile/board-marzen-reference.c | 17 ++++++++---------
2 files changed, 13 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 7f146c6..9dfc438 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -101,6 +101,11 @@
interrupts = <0 81 0x4>;
};
+ pfc: pfc@fffc0000 {
+ compatible = "renesas,pfc-r8a7779";
+ reg = <0xfffc0000 0x23c>;
+ };
+
thermal@ffc48000 {
compatible = "renesas,rcar-thermal";
reg = <0xffc48000 0x38>;
diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c
index 480d882..94804f3 100644
--- a/arch/arm/mach-shmobile/board-marzen-reference.c
+++ b/arch/arm/mach-shmobile/board-marzen-reference.c
@@ -28,24 +28,24 @@
static const struct pinctrl_map marzen_pinctrl_map[] = {
/* SCIF2 (CN18: DEBUG0) */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779",
+ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "fffc0000.pfc",
"scif2_data_c", "scif2"),
/* SCIF4 (CN19: DEBUG1) */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779",
+ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "fffc0000.pfc",
"scif4_data", "scif4"),
/* SDHI0 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "fffc0000.pfc",
"sdhi0_data4", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "fffc0000.pfc",
"sdhi0_ctrl", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "fffc0000.pfc",
"sdhi0_cd", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "fffc0000.pfc",
"sdhi0_wp", "sdhi0"),
/* SMSC */
- PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
+ PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "fffc0000.pfc",
"intc_irq1_b", "intc"),
- PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
+ PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "fffc0000.pfc",
"lbsc_ex_cs0", "lbsc"),
};
@@ -53,7 +53,6 @@ static void __init marzen_init(void)
{
pinctrl_register_mappings(marzen_pinctrl_map,
ARRAY_SIZE(marzen_pinctrl_map));
- r8a7779_pinmux_init();
r8a7779_add_standard_devices_dt();
}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 05/19] ARM: shmobile: r8a7779: Add pin control device to device tree
@ 2013-07-19 4:36 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:36 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add a pfc node to the r8a7779 device tree and remove manual pinmux
initialization from the corresponding board files.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779.dtsi | 5 +++++
arch/arm/mach-shmobile/board-marzen-reference.c | 17 ++++++++---------
2 files changed, 13 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 7f146c6..9dfc438 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -101,6 +101,11 @@
interrupts = <0 81 0x4>;
};
+ pfc: pfc at fffc0000 {
+ compatible = "renesas,pfc-r8a7779";
+ reg = <0xfffc0000 0x23c>;
+ };
+
thermal at ffc48000 {
compatible = "renesas,rcar-thermal";
reg = <0xffc48000 0x38>;
diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c
index 480d882..94804f3 100644
--- a/arch/arm/mach-shmobile/board-marzen-reference.c
+++ b/arch/arm/mach-shmobile/board-marzen-reference.c
@@ -28,24 +28,24 @@
static const struct pinctrl_map marzen_pinctrl_map[] = {
/* SCIF2 (CN18: DEBUG0) */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779",
+ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "fffc0000.pfc",
"scif2_data_c", "scif2"),
/* SCIF4 (CN19: DEBUG1) */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779",
+ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "fffc0000.pfc",
"scif4_data", "scif4"),
/* SDHI0 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "fffc0000.pfc",
"sdhi0_data4", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "fffc0000.pfc",
"sdhi0_ctrl", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "fffc0000.pfc",
"sdhi0_cd", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "fffc0000.pfc",
"sdhi0_wp", "sdhi0"),
/* SMSC */
- PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
+ PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "fffc0000.pfc",
"intc_irq1_b", "intc"),
- PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
+ PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "fffc0000.pfc",
"lbsc_ex_cs0", "lbsc"),
};
@@ -53,7 +53,6 @@ static void __init marzen_init(void)
{
pinctrl_register_mappings(marzen_pinctrl_map,
ARRAY_SIZE(marzen_pinctrl_map));
- r8a7779_pinmux_init();
r8a7779_add_standard_devices_dt();
}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 06/19] ARM: shmobile: r8a7779: Add GPIO controller devices to device tree
2013-07-19 4:36 ` Simon Horman
@ 2013-07-19 4:37 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add GPIO controller nodes to the r8a7779 core device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779.dtsi | 85 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 85 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 9dfc438..e9fbe3d 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -48,6 +48,90 @@
<0xf0000100 0x100>;
};
+ gpio0: gpio@ffc40000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc40000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 141 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio1: gpio@ffc41000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc41000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 142 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio2: gpio@ffc42000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc42000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 143 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio3: gpio@ffc43000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc43000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 144 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio4: gpio@ffc44000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc44000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 145 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio5: gpio@ffc45000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc45000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 146 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio6: gpio@ffc46000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc46000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 147 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 9>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
irqpin0: irqpin@fe780010 {
compatible = "renesas,intc-irqpin";
#interrupt-cells = <2>;
@@ -104,6 +188,7 @@
pfc: pfc@fffc0000 {
compatible = "renesas,pfc-r8a7779";
reg = <0xfffc0000 0x23c>;
+ #gpio-range-cells = <3>;
};
thermal@ffc48000 {
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 06/19] ARM: shmobile: r8a7779: Add GPIO controller devices to device tree
@ 2013-07-19 4:37 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add GPIO controller nodes to the r8a7779 core device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779.dtsi | 85 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 85 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 9dfc438..e9fbe3d 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -48,6 +48,90 @@
<0xf0000100 0x100>;
};
+ gpio0: gpio at ffc40000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc40000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 141 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio1: gpio at ffc41000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc41000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 142 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio2: gpio at ffc42000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc42000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 143 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio3: gpio at ffc43000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc43000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 144 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio4: gpio at ffc44000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc44000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 145 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio5: gpio at ffc45000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc45000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 146 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio6: gpio at ffc46000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc46000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 147 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 9>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
irqpin0: irqpin at fe780010 {
compatible = "renesas,intc-irqpin";
#interrupt-cells = <2>;
@@ -104,6 +188,7 @@
pfc: pfc at fffc0000 {
compatible = "renesas,pfc-r8a7779";
reg = <0xfffc0000 0x23c>;
+ #gpio-range-cells = <3>;
};
thermal at ffc48000 {
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 07/19] ARM: shmobile: r8a7790: Add pin control device to device tree
2013-07-19 4:36 ` Simon Horman
@ 2013-07-19 4:37 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add a pfc node to the r8a7790 device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 339d9b1..13caf12 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -54,4 +54,9 @@
interrupt-parent = <&gic>;
interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>;
};
+
+ pfc: pfc@e6060000 {
+ compatible = "renesas,pfc-r8a7790";
+ reg = <0 0xe6060000 0 0x250>;
+ };
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 07/19] ARM: shmobile: r8a7790: Add pin control device to device tree
@ 2013-07-19 4:37 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add a pfc node to the r8a7790 device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 339d9b1..13caf12 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -54,4 +54,9 @@
interrupt-parent = <&gic>;
interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>;
};
+
+ pfc: pfc at e6060000 {
+ compatible = "renesas,pfc-r8a7790";
+ reg = <0 0xe6060000 0 0x250>;
+ };
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 08/19] ARM: shmobile: r8a7790: Add GPIO controller devices to device tree
2013-07-19 4:36 ` Simon Horman
@ 2013-07-19 4:37 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add GPIO controller nodes to the r8a7790 core device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 73 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 13caf12..9465cfc 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -38,6 +38,78 @@
interrupts = <1 9 0xf04>;
};
+ gpio0: gpio@ffc40000 {
+ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ reg = <0 0xffc40000 0 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 4 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio1: gpio@ffc41000 {
+ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ reg = <0 0xffc41000 0 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 5 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio2: gpio@ffc42000 {
+ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ reg = <0 0xffc42000 0 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 6 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio3: gpio@ffc43000 {
+ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ reg = <0 0xffc43000 0 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 7 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio4: gpio@ffc44000 {
+ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ reg = <0 0xffc44000 0 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 8 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio5: gpio@ffc45000 {
+ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ reg = <0 0xffc45000 0 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 9 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 0xf08>,
@@ -58,5 +130,6 @@
pfc: pfc@e6060000 {
compatible = "renesas,pfc-r8a7790";
reg = <0 0xe6060000 0 0x250>;
+ #gpio-range-cells = <3>;
};
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 08/19] ARM: shmobile: r8a7790: Add GPIO controller devices to device tree
@ 2013-07-19 4:37 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add GPIO controller nodes to the r8a7790 core device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 73 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 13caf12..9465cfc 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -38,6 +38,78 @@
interrupts = <1 9 0xf04>;
};
+ gpio0: gpio at ffc40000 {
+ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ reg = <0 0xffc40000 0 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 4 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio1: gpio at ffc41000 {
+ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ reg = <0 0xffc41000 0 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 5 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio2: gpio at ffc42000 {
+ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ reg = <0 0xffc42000 0 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 6 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio3: gpio at ffc43000 {
+ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ reg = <0 0xffc43000 0 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 7 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio4: gpio at ffc44000 {
+ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ reg = <0 0xffc44000 0 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 8 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio5: gpio at ffc45000 {
+ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ reg = <0 0xffc45000 0 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 9 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 0xf08>,
@@ -58,5 +130,6 @@
pfc: pfc at e6060000 {
compatible = "renesas,pfc-r8a7790";
reg = <0 0xe6060000 0 0x250>;
+ #gpio-range-cells = <3>;
};
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 09/19] ARM: shmobile: sh7372: Add pin control device to device tree
2013-07-19 4:36 ` Simon Horman
@ 2013-07-19 4:37 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add a pfc node to the sh7372 device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/sh7372.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/sh7372.dtsi b/arch/arm/boot/dts/sh7372.dtsi
index 7bf020e..249f65be2 100644
--- a/arch/arm/boot/dts/sh7372.dtsi
+++ b/arch/arm/boot/dts/sh7372.dtsi
@@ -23,4 +23,12 @@
reg = <0x0>;
};
};
+
+ pfc: pfc@e6050000 {
+ compatible = "renesas,pfc-sh7372";
+ reg = <0xe6050000 0x8000>,
+ <0xe605801c 0x1c>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 09/19] ARM: shmobile: sh7372: Add pin control device to device tree
@ 2013-07-19 4:37 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add a pfc node to the sh7372 device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/sh7372.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/sh7372.dtsi b/arch/arm/boot/dts/sh7372.dtsi
index 7bf020e..249f65be2 100644
--- a/arch/arm/boot/dts/sh7372.dtsi
+++ b/arch/arm/boot/dts/sh7372.dtsi
@@ -23,4 +23,12 @@
reg = <0x0>;
};
};
+
+ pfc: pfc at e6050000 {
+ compatible = "renesas,pfc-sh7372";
+ reg = <0xe6050000 0x8000>,
+ <0xe605801c 0x1c>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 10/19] ARM: shmobile: sh73a0: Add pin control device to device tree
2013-07-19 4:36 ` Simon Horman
@ 2013-07-19 4:37 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add a pfc node to the sh73a0 device tree and remove manual pinmux
initialization from the corresponding board files.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/sh73a0.dtsi | 8 +++++++
arch/arm/mach-shmobile/board-kzm9g-reference.c | 27 ++++++++++++------------
2 files changed, 21 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index b977502..86e79fe 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -222,4 +222,12 @@
cap-sd-highspeed;
status = "disabled";
};
+
+ pfc: pfc@e6050000 {
+ compatible = "renesas,pfc-sh73a0";
+ reg = <0xe6050000 0x8000>,
+ <0xe605801c 0x1c>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index 44055fe..6ff6ca2 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -40,35 +40,35 @@ static unsigned long pin_pullup_conf[] = {
};
static const struct pinctrl_map kzm_pinctrl_map[] = {
- PIN_MAP_MUX_GROUP_DEFAULT("e6826000.i2c", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("e6826000.i2c", "e6050000.pfc",
"i2c3_1", "i2c3"),
/* MMCIF */
- PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
"mmc0_data8_0", "mmc0"),
- PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
"mmc0_ctrl_0", "mmc0"),
- PIN_MAP_CONFIGS_PIN_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
+ PIN_MAP_CONFIGS_PIN_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
"PORT279", pin_pullup_conf),
- PIN_MAP_CONFIGS_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
+ PIN_MAP_CONFIGS_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
"mmc0_data8_0", pin_pullup_conf),
/* SCIFA4 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "e6050000.pfc",
"scifa4_data", "scifa4"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "e6050000.pfc",
"scifa4_ctrl", "scifa4"),
/* SDHI0 */
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
"sdhi0_data4", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
"sdhi0_ctrl", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
"sdhi0_cd", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
"sdhi0_wp", "sdhi0"),
/* SDHI2 */
- PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "e6050000.pfc",
"sdhi2_data4", "sdhi2"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "e6050000.pfc",
"sdhi2_ctrl", "sdhi2"),
};
@@ -76,7 +76,6 @@ static void __init kzm_init(void)
{
sh73a0_add_standard_devices_dt();
pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map));
- sh73a0_pinmux_init();
/* enable SD */
gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 10/19] ARM: shmobile: sh73a0: Add pin control device to device tree
@ 2013-07-19 4:37 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add a pfc node to the sh73a0 device tree and remove manual pinmux
initialization from the corresponding board files.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/sh73a0.dtsi | 8 +++++++
arch/arm/mach-shmobile/board-kzm9g-reference.c | 27 ++++++++++++------------
2 files changed, 21 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index b977502..86e79fe 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -222,4 +222,12 @@
cap-sd-highspeed;
status = "disabled";
};
+
+ pfc: pfc at e6050000 {
+ compatible = "renesas,pfc-sh73a0";
+ reg = <0xe6050000 0x8000>,
+ <0xe605801c 0x1c>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index 44055fe..6ff6ca2 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -40,35 +40,35 @@ static unsigned long pin_pullup_conf[] = {
};
static const struct pinctrl_map kzm_pinctrl_map[] = {
- PIN_MAP_MUX_GROUP_DEFAULT("e6826000.i2c", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("e6826000.i2c", "e6050000.pfc",
"i2c3_1", "i2c3"),
/* MMCIF */
- PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
"mmc0_data8_0", "mmc0"),
- PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
"mmc0_ctrl_0", "mmc0"),
- PIN_MAP_CONFIGS_PIN_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
+ PIN_MAP_CONFIGS_PIN_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
"PORT279", pin_pullup_conf),
- PIN_MAP_CONFIGS_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
+ PIN_MAP_CONFIGS_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
"mmc0_data8_0", pin_pullup_conf),
/* SCIFA4 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "e6050000.pfc",
"scifa4_data", "scifa4"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "e6050000.pfc",
"scifa4_ctrl", "scifa4"),
/* SDHI0 */
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
"sdhi0_data4", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
"sdhi0_ctrl", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
"sdhi0_cd", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
"sdhi0_wp", "sdhi0"),
/* SDHI2 */
- PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "e6050000.pfc",
"sdhi2_data4", "sdhi2"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0",
+ PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "e6050000.pfc",
"sdhi2_ctrl", "sdhi2"),
};
@@ -76,7 +76,6 @@ static void __init kzm_init(void)
{
sh73a0_add_standard_devices_dt();
pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map));
- sh73a0_pinmux_init();
/* enable SD */
gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 11/19] ARM: shmobile: armadillo-reference: Move pinctrl mappings to device tree
2013-07-19 4:36 ` Simon Horman
@ 2013-07-19 4:37 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Replace the pinctrl mappings in board code by device tree mappings.
For devices that are still instantiated from board code reference the
mappings as the default pin controller state to apply them at boot time.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts | 10 ++++++++++
arch/arm/mach-shmobile/board-armadillo800eva-reference.c | 9 ---------
2 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
index 09ea22c..4a7ae32 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
@@ -43,3 +43,13 @@
interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */
};
};
+
+&pfc {
+ pinctrl-0 = <&scifa1_pins>;
+ pinctrl-names = "default";
+
+ scifa1_pins: scifa1 {
+ renesas,groups = "scifa1_data";
+ renesas,function = "scifa1";
+ };
+};
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
index f25b6aa..4ddd299 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
@@ -24,7 +24,6 @@
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/io.h>
-#include <linux/pinctrl/machine.h>
#include <mach/common.h>
#include <mach/r8a7740.h>
#include <asm/mach/arch.h>
@@ -119,12 +118,6 @@
* usbhsf_power_ctrl()
*/
-static const struct pinctrl_map eva_pinctrl_map[] = {
- /* SCIFA1 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "e6050000.pfc",
- "scifa1_data", "scifa1"),
-};
-
static void __init eva_clock_init(void)
{
struct clk *system = clk_get(NULL, "system_clk");
@@ -169,8 +162,6 @@ static void __init eva_init(void)
r8a7740_clock_init(MD_CK0 | MD_CK2);
eva_clock_init();
- pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map));
-
r8a7740_meram_workaround();
#ifdef CONFIG_CACHE_L2X0
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 11/19] ARM: shmobile: armadillo-reference: Move pinctrl mappings to device tree
@ 2013-07-19 4:37 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Replace the pinctrl mappings in board code by device tree mappings.
For devices that are still instantiated from board code reference the
mappings as the default pin controller state to apply them at boot time.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts | 10 ++++++++++
arch/arm/mach-shmobile/board-armadillo800eva-reference.c | 9 ---------
2 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
index 09ea22c..4a7ae32 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
@@ -43,3 +43,13 @@
interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */
};
};
+
+&pfc {
+ pinctrl-0 = <&scifa1_pins>;
+ pinctrl-names = "default";
+
+ scifa1_pins: scifa1 {
+ renesas,groups = "scifa1_data";
+ renesas,function = "scifa1";
+ };
+};
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
index f25b6aa..4ddd299 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
@@ -24,7 +24,6 @@
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/io.h>
-#include <linux/pinctrl/machine.h>
#include <mach/common.h>
#include <mach/r8a7740.h>
#include <asm/mach/arch.h>
@@ -119,12 +118,6 @@
* usbhsf_power_ctrl()
*/
-static const struct pinctrl_map eva_pinctrl_map[] = {
- /* SCIFA1 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "e6050000.pfc",
- "scifa1_data", "scifa1"),
-};
-
static void __init eva_clock_init(void)
{
struct clk *system = clk_get(NULL, "system_clk");
@@ -169,8 +162,6 @@ static void __init eva_init(void)
r8a7740_clock_init(MD_CK0 | MD_CK2);
eva_clock_init();
- pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map));
-
r8a7740_meram_workaround();
#ifdef CONFIG_CACHE_L2X0
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 12/19] ARM: shmobile: armadillo-reference: Add st1232 pin mappings
2013-07-19 4:36 ` Simon Horman
@ 2013-07-19 4:37 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add pin mappings for the st1232 device to the device tree and reference
them as the default state for the device.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
index 4a7ae32..a6c6606 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
@@ -41,6 +41,8 @@
reg = <0x55>;
interrupt-parent = <&irqpin1>;
interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */
+ pinctrl-0 = <&st1232_pins>;
+ pinctrl-names = "default";
};
};
@@ -52,4 +54,9 @@
renesas,groups = "scifa1_data";
renesas,function = "scifa1";
};
+
+ st1232_pins: st1232 {
+ renesas,groups = "intc_irq10";
+ renesas,function = "intc";
+ };
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 12/19] ARM: shmobile: armadillo-reference: Add st1232 pin mappings
@ 2013-07-19 4:37 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add pin mappings for the st1232 device to the device tree and reference
them as the default state for the device.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
index 4a7ae32..a6c6606 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
@@ -41,6 +41,8 @@
reg = <0x55>;
interrupt-parent = <&irqpin1>;
interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */
+ pinctrl-0 = <&st1232_pins>;
+ pinctrl-names = "default";
};
};
@@ -52,4 +54,9 @@
renesas,groups = "scifa1_data";
renesas,function = "scifa1";
};
+
+ st1232_pins: st1232 {
+ renesas,groups = "intc_irq10";
+ renesas,function = "intc";
+ };
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 13/19] ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DT
2013-07-19 4:36 ` Simon Horman
@ 2013-07-19 4:37 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reference the st1232 reset GPIO from the device tree and remove it from
board code.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts | 2 ++
arch/arm/mach-shmobile/board-armadillo800eva-reference.c | 7 -------
2 files changed, 2 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
index a6c6606..8ec4cd1 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
@@ -10,6 +10,7 @@
/dts-v1/;
/include/ "r8a7740.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "armadillo 800 eva reference";
@@ -43,6 +44,7 @@
interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */
pinctrl-0 = <&st1232_pins>;
pinctrl-names = "default";
+ gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
};
};
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
index 4ddd299..002d8d3 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
@@ -158,7 +158,6 @@ clock_error:
*/
static void __init eva_init(void)
{
-
r8a7740_clock_init(MD_CK0 | MD_CK2);
eva_clock_init();
@@ -171,12 +170,6 @@ static void __init eva_init(void)
r8a7740_add_standard_devices_dt();
- /*
- * Touchscreen
- * TODO: Move reset GPIO over to .dts when we can reference it
- */
- gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
-
r8a7740_pm_init();
}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 13/19] ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DT
@ 2013-07-19 4:37 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reference the st1232 reset GPIO from the device tree and remove it from
board code.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts | 2 ++
arch/arm/mach-shmobile/board-armadillo800eva-reference.c | 7 -------
2 files changed, 2 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
index a6c6606..8ec4cd1 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
@@ -10,6 +10,7 @@
/dts-v1/;
/include/ "r8a7740.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "armadillo 800 eva reference";
@@ -43,6 +44,7 @@
interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */
pinctrl-0 = <&st1232_pins>;
pinctrl-names = "default";
+ gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
};
};
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
index 4ddd299..002d8d3 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
@@ -158,7 +158,6 @@ clock_error:
*/
static void __init eva_init(void)
{
-
r8a7740_clock_init(MD_CK0 | MD_CK2);
eva_clock_init();
@@ -171,12 +170,6 @@ static void __init eva_init(void)
r8a7740_add_standard_devices_dt();
- /*
- * Touchscreen
- * TODO: Move reset GPIO over to .dts when we can reference it
- */
- gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
-
r8a7740_pm_init();
}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 14/19] ARM: shmobile: armadillo-reference: Add LED1-LED4 to the device tree
2013-07-19 4:36 ` Simon Horman
@ 2013-07-19 4:37 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
LED1 to LED4 are GPIO LEDs. Add corresponding DT nodes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
index 8ec4cd1..366f729 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
@@ -34,6 +34,21 @@
regulator-boot-on;
};
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
+ };
+ led2 {
+ gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
+ };
+ led3 {
+ gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
+ };
+ led4 {
+ gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&i2c0 {
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 14/19] ARM: shmobile: armadillo-reference: Add LED1-LED4 to the device tree
@ 2013-07-19 4:37 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
LED1 to LED4 are GPIO LEDs. Add corresponding DT nodes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
index 8ec4cd1..366f729 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
@@ -34,6 +34,21 @@
regulator-boot-on;
};
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
+ };
+ led2 {
+ gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
+ };
+ led3 {
+ gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
+ };
+ led4 {
+ gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&i2c0 {
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 15/19] ARM: shmobile: marzen-reference: Move pinctrl mappings to device tree
2013-07-19 4:36 ` Simon Horman
@ 2013-07-19 4:37 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Replace the pinctrl mappings in board code by device tree mappings.
For devices that are still instantiated from board code reference the
mappings as the default pin controller state to apply them at boot time.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779-marzen-reference.dts | 35 +++++++++++++++++++++++
arch/arm/mach-shmobile/board-marzen-reference.c | 27 -----------------
2 files changed, 35 insertions(+), 27 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
index 72be4c8..6d20247 100644
--- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
@@ -37,6 +37,9 @@
lan0@18000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x18000000 0x100>;
+ pinctrl-0 = <&lan0_pins>;
+ pinctrl-names = "default";
+
phy-mode = "mii";
interrupt-parent = <&gic>;
interrupts = <0 28 0x4>;
@@ -45,3 +48,35 @@
vdd33a-supply = <&fixedregulator3v3>;
};
};
+
+&pfc {
+ pinctrl-0 = <&scif2_pins &scif4_pins &sdhi0_pins>;
+ pinctrl-names = "default";
+
+ lan0_pins: lan0 {
+ intc {
+ renesas,groups = "intc_irq1_b";
+ renesas,function = "intc";
+ };
+ lbsc {
+ renesas,groups = "lbsc_ex_cs0";
+ renesas,function = "lbsc";
+ };
+ };
+
+ scif2_pins: scif2 {
+ renesas,groups = "scif2_data_c";
+ renesas,function = "scif2";
+ };
+
+ scif4_pins: scif4 {
+ renesas,groups = "scif4_data";
+ renesas,function = "scif4";
+ };
+
+ sdhi0_pins: sdhi0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd",
+ "sdhi0_wp";
+ renesas,function = "sdhi0";
+ };
+};
diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c
index 94804f3..3d1c439 100644
--- a/arch/arm/mach-shmobile/board-marzen-reference.c
+++ b/arch/arm/mach-shmobile/board-marzen-reference.c
@@ -19,41 +19,14 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/pinctrl/machine.h>
#include <mach/r8a7779.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
-static const struct pinctrl_map marzen_pinctrl_map[] = {
- /* SCIF2 (CN18: DEBUG0) */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "fffc0000.pfc",
- "scif2_data_c", "scif2"),
- /* SCIF4 (CN19: DEBUG1) */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "fffc0000.pfc",
- "scif4_data", "scif4"),
- /* SDHI0 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "fffc0000.pfc",
- "sdhi0_data4", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "fffc0000.pfc",
- "sdhi0_ctrl", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "fffc0000.pfc",
- "sdhi0_cd", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "fffc0000.pfc",
- "sdhi0_wp", "sdhi0"),
- /* SMSC */
- PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "fffc0000.pfc",
- "intc_irq1_b", "intc"),
- PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "fffc0000.pfc",
- "lbsc_ex_cs0", "lbsc"),
-};
-
static void __init marzen_init(void)
{
- pinctrl_register_mappings(marzen_pinctrl_map,
- ARRAY_SIZE(marzen_pinctrl_map));
-
r8a7779_add_standard_devices_dt();
}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 15/19] ARM: shmobile: marzen-reference: Move pinctrl mappings to device tree
@ 2013-07-19 4:37 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Replace the pinctrl mappings in board code by device tree mappings.
For devices that are still instantiated from board code reference the
mappings as the default pin controller state to apply them at boot time.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779-marzen-reference.dts | 35 +++++++++++++++++++++++
arch/arm/mach-shmobile/board-marzen-reference.c | 27 -----------------
2 files changed, 35 insertions(+), 27 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
index 72be4c8..6d20247 100644
--- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
@@ -37,6 +37,9 @@
lan0 at 18000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x18000000 0x100>;
+ pinctrl-0 = <&lan0_pins>;
+ pinctrl-names = "default";
+
phy-mode = "mii";
interrupt-parent = <&gic>;
interrupts = <0 28 0x4>;
@@ -45,3 +48,35 @@
vdd33a-supply = <&fixedregulator3v3>;
};
};
+
+&pfc {
+ pinctrl-0 = <&scif2_pins &scif4_pins &sdhi0_pins>;
+ pinctrl-names = "default";
+
+ lan0_pins: lan0 {
+ intc {
+ renesas,groups = "intc_irq1_b";
+ renesas,function = "intc";
+ };
+ lbsc {
+ renesas,groups = "lbsc_ex_cs0";
+ renesas,function = "lbsc";
+ };
+ };
+
+ scif2_pins: scif2 {
+ renesas,groups = "scif2_data_c";
+ renesas,function = "scif2";
+ };
+
+ scif4_pins: scif4 {
+ renesas,groups = "scif4_data";
+ renesas,function = "scif4";
+ };
+
+ sdhi0_pins: sdhi0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd",
+ "sdhi0_wp";
+ renesas,function = "sdhi0";
+ };
+};
diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c
index 94804f3..3d1c439 100644
--- a/arch/arm/mach-shmobile/board-marzen-reference.c
+++ b/arch/arm/mach-shmobile/board-marzen-reference.c
@@ -19,41 +19,14 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/pinctrl/machine.h>
#include <mach/r8a7779.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
-static const struct pinctrl_map marzen_pinctrl_map[] = {
- /* SCIF2 (CN18: DEBUG0) */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "fffc0000.pfc",
- "scif2_data_c", "scif2"),
- /* SCIF4 (CN19: DEBUG1) */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "fffc0000.pfc",
- "scif4_data", "scif4"),
- /* SDHI0 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "fffc0000.pfc",
- "sdhi0_data4", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "fffc0000.pfc",
- "sdhi0_ctrl", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "fffc0000.pfc",
- "sdhi0_cd", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "fffc0000.pfc",
- "sdhi0_wp", "sdhi0"),
- /* SMSC */
- PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "fffc0000.pfc",
- "intc_irq1_b", "intc"),
- PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "fffc0000.pfc",
- "lbsc_ex_cs0", "lbsc"),
-};
-
static void __init marzen_init(void)
{
- pinctrl_register_mappings(marzen_pinctrl_map,
- ARRAY_SIZE(marzen_pinctrl_map));
-
r8a7779_add_standard_devices_dt();
}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 16/19] ARM: shmobile: marzen-reference: Add LED2-LED4 to the device tree
2013-07-19 4:36 ` Simon Horman
@ 2013-07-19 4:37 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
LED2 to LED4 are GPIO LEDs. Add corresponding DT nodes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779-marzen-reference.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
index 6d20247..b64705b 100644
--- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
@@ -11,6 +11,7 @@
/dts-v1/;
/include/ "r8a7779.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "marzen";
@@ -47,6 +48,19 @@
vddvario-supply = <&fixedregulator3v3>;
vdd33a-supply = <&fixedregulator3v3>;
};
+
+ leds {
+ compatible = "gpio-leds";
+ led2 {
+ gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ };
+ led3 {
+ gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+ };
+ led4 {
+ gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&pfc {
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 16/19] ARM: shmobile: marzen-reference: Add LED2-LED4 to the device tree
@ 2013-07-19 4:37 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
LED2 to LED4 are GPIO LEDs. Add corresponding DT nodes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779-marzen-reference.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
index 6d20247..b64705b 100644
--- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
@@ -11,6 +11,7 @@
/dts-v1/;
/include/ "r8a7779.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "marzen";
@@ -47,6 +48,19 @@
vddvario-supply = <&fixedregulator3v3>;
vdd33a-supply = <&fixedregulator3v3>;
};
+
+ leds {
+ compatible = "gpio-leds";
+ led2 {
+ gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ };
+ led3 {
+ gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+ };
+ led4 {
+ gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&pfc {
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 17/19] ARM: shmobile: kzm9g-reference: Move pinctrl mappings to device tree
2013-07-19 4:36 ` Simon Horman
@ 2013-07-19 4:37 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Replace the pinctrl mappings in board code by device tree mappings.
For devices that are still instantiated from board code reference the
mappings as the default pin controller state to apply them at boot time.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 51 ++++++++++++++++++++++++
arch/arm/mach-shmobile/board-kzm9g-reference.c | 40 -------------------
2 files changed, 51 insertions(+), 40 deletions(-)
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index b6f759e..11ae9ad 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -145,19 +145,70 @@
};
};
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+};
+
&mmcif {
+ pinctrl-0 = <&mmcif_pins>;
+ pinctrl-names = "default";
+
bus-width = <8>;
vmmc-supply = <®_1p8v>;
status = "okay";
};
+&pfc {
+ pinctrl-0 = <&scifa4_pins>;
+ pinctrl-names = "default";
+
+ i2c3_pins: i2c3 {
+ renesas,groups = "i2c3_1";
+ renesas,function = "i2c3";
+ };
+
+ mmcif_pins: mmcif {
+ mux {
+ renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
+ renesas,function = "mmc0";
+ };
+ cfg {
+ renesas,groups = "mmc0_data8_0";
+ renesas,pins = "PORT279";
+ bias-pull-up;
+ };
+ };
+
+ scifa4_pins: scifa4 {
+ renesas,groups = "scifa4_data", "scifa4_ctrl";
+ renesas,function = "scifa4";
+ };
+
+ sdhi0_pins: sdhi0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
+ renesas,function = "sdhi0";
+ };
+
+ sdhi2_pins: sdhi2 {
+ renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+ renesas,function = "sdhi2";
+ };
+};
+
&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
vmmc-supply = <®_3p3v>;
bus-width = <4>;
status = "okay";
};
&sdhi2 {
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-names = "default";
+
vmmc-supply = <®_3p3v>;
bus-width = <4>;
broken-cd;
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index 6ff6ca2..fc2bb37 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -27,55 +27,15 @@
#include <linux/irqchip.h>
#include <linux/input.h>
#include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
#include <mach/sh73a0.h>
#include <mach/common.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-static unsigned long pin_pullup_conf[] = {
- PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
-};
-
-static const struct pinctrl_map kzm_pinctrl_map[] = {
- PIN_MAP_MUX_GROUP_DEFAULT("e6826000.i2c", "e6050000.pfc",
- "i2c3_1", "i2c3"),
- /* MMCIF */
- PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
- "mmc0_data8_0", "mmc0"),
- PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
- "mmc0_ctrl_0", "mmc0"),
- PIN_MAP_CONFIGS_PIN_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
- "PORT279", pin_pullup_conf),
- PIN_MAP_CONFIGS_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
- "mmc0_data8_0", pin_pullup_conf),
- /* SCIFA4 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "e6050000.pfc",
- "scifa4_data", "scifa4"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "e6050000.pfc",
- "scifa4_ctrl", "scifa4"),
- /* SDHI0 */
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
- "sdhi0_data4", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
- "sdhi0_ctrl", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
- "sdhi0_cd", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
- "sdhi0_wp", "sdhi0"),
- /* SDHI2 */
- PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "e6050000.pfc",
- "sdhi2_data4", "sdhi2"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "e6050000.pfc",
- "sdhi2_ctrl", "sdhi2"),
-};
-
static void __init kzm_init(void)
{
sh73a0_add_standard_devices_dt();
- pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map));
/* enable SD */
gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 17/19] ARM: shmobile: kzm9g-reference: Move pinctrl mappings to device tree
@ 2013-07-19 4:37 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Replace the pinctrl mappings in board code by device tree mappings.
For devices that are still instantiated from board code reference the
mappings as the default pin controller state to apply them at boot time.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 51 ++++++++++++++++++++++++
arch/arm/mach-shmobile/board-kzm9g-reference.c | 40 -------------------
2 files changed, 51 insertions(+), 40 deletions(-)
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index b6f759e..11ae9ad 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -145,19 +145,70 @@
};
};
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+};
+
&mmcif {
+ pinctrl-0 = <&mmcif_pins>;
+ pinctrl-names = "default";
+
bus-width = <8>;
vmmc-supply = <®_1p8v>;
status = "okay";
};
+&pfc {
+ pinctrl-0 = <&scifa4_pins>;
+ pinctrl-names = "default";
+
+ i2c3_pins: i2c3 {
+ renesas,groups = "i2c3_1";
+ renesas,function = "i2c3";
+ };
+
+ mmcif_pins: mmcif {
+ mux {
+ renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
+ renesas,function = "mmc0";
+ };
+ cfg {
+ renesas,groups = "mmc0_data8_0";
+ renesas,pins = "PORT279";
+ bias-pull-up;
+ };
+ };
+
+ scifa4_pins: scifa4 {
+ renesas,groups = "scifa4_data", "scifa4_ctrl";
+ renesas,function = "scifa4";
+ };
+
+ sdhi0_pins: sdhi0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
+ renesas,function = "sdhi0";
+ };
+
+ sdhi2_pins: sdhi2 {
+ renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+ renesas,function = "sdhi2";
+ };
+};
+
&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
vmmc-supply = <®_3p3v>;
bus-width = <4>;
status = "okay";
};
&sdhi2 {
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-names = "default";
+
vmmc-supply = <®_3p3v>;
bus-width = <4>;
broken-cd;
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index 6ff6ca2..fc2bb37 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -27,55 +27,15 @@
#include <linux/irqchip.h>
#include <linux/input.h>
#include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
#include <mach/sh73a0.h>
#include <mach/common.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-static unsigned long pin_pullup_conf[] = {
- PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
-};
-
-static const struct pinctrl_map kzm_pinctrl_map[] = {
- PIN_MAP_MUX_GROUP_DEFAULT("e6826000.i2c", "e6050000.pfc",
- "i2c3_1", "i2c3"),
- /* MMCIF */
- PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
- "mmc0_data8_0", "mmc0"),
- PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
- "mmc0_ctrl_0", "mmc0"),
- PIN_MAP_CONFIGS_PIN_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
- "PORT279", pin_pullup_conf),
- PIN_MAP_CONFIGS_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
- "mmc0_data8_0", pin_pullup_conf),
- /* SCIFA4 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "e6050000.pfc",
- "scifa4_data", "scifa4"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "e6050000.pfc",
- "scifa4_ctrl", "scifa4"),
- /* SDHI0 */
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
- "sdhi0_data4", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
- "sdhi0_ctrl", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
- "sdhi0_cd", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
- "sdhi0_wp", "sdhi0"),
- /* SDHI2 */
- PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "e6050000.pfc",
- "sdhi2_data4", "sdhi2"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "e6050000.pfc",
- "sdhi2_ctrl", "sdhi2"),
-};
-
static void __init kzm_init(void)
{
sh73a0_add_standard_devices_dt();
- pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map));
/* enable SD */
gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 18/19] ARM: shmobile: kzm9g-reference: Move SDHI regulators to DT
2013-07-19 4:36 ` Simon Horman
@ 2013-07-19 4:37 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Create two GPIO-controlled fixed-voltage regulators in the
kzm9g-reference DT and remove manual configuration of the corresponding
GPIOs from board code.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 23 +++++++++++++++++++++--
arch/arm/mach-shmobile/board-kzm9g-reference.c | 6 ------
2 files changed, 21 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index 11ae9ad..d2b2c9f 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -13,6 +13,7 @@
/dts-v1/;
/include/ "sh73a0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "KZM-A9-GT";
@@ -58,6 +59,24 @@
regulator-boot-on;
};
+ vmmc_sdhi0: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vmmc_sdhi2: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "SDHI2 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
lan9220@10000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x10000000 0x100>;
@@ -200,7 +219,7 @@
pinctrl-0 = <&sdhi0_pins>;
pinctrl-names = "default";
- vmmc-supply = <®_3p3v>;
+ vmmc-supply = <&vmmc_sdhi0>;
bus-width = <4>;
status = "okay";
};
@@ -209,7 +228,7 @@
pinctrl-0 = <&sdhi2_pins>;
pinctrl-names = "default";
- vmmc-supply = <®_3p3v>;
+ vmmc-supply = <&vmmc_sdhi2>;
bus-width = <4>;
broken-cd;
status = "okay";
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index fc2bb37..1847b4d 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -21,7 +21,6 @@
*/
#include <linux/delay.h>
-#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
@@ -37,11 +36,6 @@ static void __init kzm_init(void)
{
sh73a0_add_standard_devices_dt();
- /* enable SD */
- gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
-
- gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */
-
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 64K*8way */
l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 18/19] ARM: shmobile: kzm9g-reference: Move SDHI regulators to DT
@ 2013-07-19 4:37 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Create two GPIO-controlled fixed-voltage regulators in the
kzm9g-reference DT and remove manual configuration of the corresponding
GPIOs from board code.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 23 +++++++++++++++++++++--
arch/arm/mach-shmobile/board-kzm9g-reference.c | 6 ------
2 files changed, 21 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index 11ae9ad..d2b2c9f 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -13,6 +13,7 @@
/dts-v1/;
/include/ "sh73a0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "KZM-A9-GT";
@@ -58,6 +59,24 @@
regulator-boot-on;
};
+ vmmc_sdhi0: regulator at 2 {
+ compatible = "regulator-fixed";
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vmmc_sdhi2: regulator at 3 {
+ compatible = "regulator-fixed";
+ regulator-name = "SDHI2 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
lan9220 at 10000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x10000000 0x100>;
@@ -200,7 +219,7 @@
pinctrl-0 = <&sdhi0_pins>;
pinctrl-names = "default";
- vmmc-supply = <®_3p3v>;
+ vmmc-supply = <&vmmc_sdhi0>;
bus-width = <4>;
status = "okay";
};
@@ -209,7 +228,7 @@
pinctrl-0 = <&sdhi2_pins>;
pinctrl-names = "default";
- vmmc-supply = <®_3p3v>;
+ vmmc-supply = <&vmmc_sdhi2>;
bus-width = <4>;
broken-cd;
status = "okay";
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index fc2bb37..1847b4d 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -21,7 +21,6 @@
*/
#include <linux/delay.h>
-#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
@@ -37,11 +36,6 @@ static void __init kzm_init(void)
{
sh73a0_add_standard_devices_dt();
- /* enable SD */
- gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
-
- gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */
-
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 64K*8way */
l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 19/19] ARM: shmobile: kzm9g-reference: Add LED1-LED4 to the device tree
2013-07-19 4:36 ` Simon Horman
@ 2013-07-19 4:37 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
LED1 to LED4 are GPIO LEDs. Add corresponding DT nodes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index d2b2c9f..b99e890 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -89,6 +89,22 @@
vddvario-supply = <®_1p8v>;
vdd33a-supply = <®_3p3v>;
};
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
+ };
+ led2 {
+ gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
+ };
+ led3 {
+ gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
+ };
+ led4 {
+ gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&i2c0 {
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 19/19] ARM: shmobile: kzm9g-reference: Add LED1-LED4 to the device tree
@ 2013-07-19 4:37 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-19 4:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
LED1 to LED4 are GPIO LEDs. Add corresponding DT nodes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index d2b2c9f..b99e890 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -89,6 +89,22 @@
vddvario-supply = <®_1p8v>;
vdd33a-supply = <®_3p3v>;
};
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
+ };
+ led2 {
+ gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
+ };
+ led3 {
+ gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
+ };
+ led4 {
+ gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&i2c0 {
--
1.7.10.4
^ permalink raw reply related [flat|nested] 50+ messages in thread
* Re: [PATCH 01/19] ARM: shmobile: r8a73a4: Add pin control device to device tree
2013-07-19 4:36 ` Simon Horman
@ 2013-07-19 12:32 ` Sergei Shtylyov
-1 siblings, 0 replies; 50+ messages in thread
From: Sergei Shtylyov @ 2013-07-19 12:32 UTC (permalink / raw)
To: linux-arm-kernel
Hello.
On 19-07-2013 8:36, Simon Horman wrote:
> From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Add a pfc node to the r8a73a4 device tree.
This patch looks strange...
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> ---
> arch/arm/boot/dts/r8a73a4.dtsi | 88 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 88 insertions(+)
> diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
> index 4ff2019..f1a35d5 100644
> --- a/arch/arm/boot/dts/r8a73a4.dtsi
> +++ b/arch/arm/boot/dts/r8a73a4.dtsi
> @@ -85,4 +85,92 @@
> interrupt-parent = <&gic>;
> interrupts = <0 69 4>;
> };
> +
> + i2c0: i2c@e6500000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,rmobile-iic";
> + reg = <0 0xe6500000 0 0x428>;
> + interrupt-parent = <&gic>;
> + interrupts = <0 174 0x4>;
> + };
[...]
> + i2c8: i2c@e6570000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,rmobile-iic";
> + reg = <0 0xe6570000 0 0x428>;
> + interrupt-parent = <&gic>;
> + interrupts = <0 173 0x4>;
> + };
> +
Hm, this also adds a bunch of I2C controllers which is not mentioned in
the changelog at all.
WBR, Sergei
^ permalink raw reply [flat|nested] 50+ messages in thread
* [PATCH 01/19] ARM: shmobile: r8a73a4: Add pin control device to device tree
@ 2013-07-19 12:32 ` Sergei Shtylyov
0 siblings, 0 replies; 50+ messages in thread
From: Sergei Shtylyov @ 2013-07-19 12:32 UTC (permalink / raw)
To: linux-arm-kernel
Hello.
On 19-07-2013 8:36, Simon Horman wrote:
> From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Add a pfc node to the r8a73a4 device tree.
This patch looks strange...
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> ---
> arch/arm/boot/dts/r8a73a4.dtsi | 88 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 88 insertions(+)
> diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
> index 4ff2019..f1a35d5 100644
> --- a/arch/arm/boot/dts/r8a73a4.dtsi
> +++ b/arch/arm/boot/dts/r8a73a4.dtsi
> @@ -85,4 +85,92 @@
> interrupt-parent = <&gic>;
> interrupts = <0 69 4>;
> };
> +
> + i2c0: i2c at e6500000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,rmobile-iic";
> + reg = <0 0xe6500000 0 0x428>;
> + interrupt-parent = <&gic>;
> + interrupts = <0 174 0x4>;
> + };
[...]
> + i2c8: i2c at e6570000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "renesas,rmobile-iic";
> + reg = <0 0xe6570000 0 0x428>;
> + interrupt-parent = <&gic>;
> + interrupts = <0 173 0x4>;
> + };
> +
Hm, this also adds a bunch of I2C controllers which is not mentioned in
the changelog at all.
WBR, Sergei
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH 01/19] ARM: shmobile: r8a73a4: Add pin control device to device tree
2013-07-19 12:32 ` Sergei Shtylyov
@ 2013-07-19 12:42 ` Laurent Pinchart
-1 siblings, 0 replies; 50+ messages in thread
From: Laurent Pinchart @ 2013-07-19 12:42 UTC (permalink / raw)
To: linux-arm-kernel
On Friday 19 July 2013 16:32:42 Sergei Shtylyov wrote:
> Hello.
>
> On 19-07-2013 8:36, Simon Horman wrote:
> > From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> >
> > Add a pfc node to the r8a73a4 device tree.
>
> This patch looks strange...
>
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@ideasonboard.com>
> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> > ---
> >
> > arch/arm/boot/dts/r8a73a4.dtsi | 88
> > ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 88
> > insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/r8a73a4.dtsi
> > b/arch/arm/boot/dts/r8a73a4.dtsi index 4ff2019..f1a35d5 100644
> > --- a/arch/arm/boot/dts/r8a73a4.dtsi
> > +++ b/arch/arm/boot/dts/r8a73a4.dtsi
> > @@ -85,4 +85,92 @@
> >
> > interrupt-parent = <&gic>;
> > interrupts = <0 69 4>;
> >
> > };
> >
> > +
> > + i2c0: i2c@e6500000 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "renesas,rmobile-iic";
> > + reg = <0 0xe6500000 0 0x428>;
> > + interrupt-parent = <&gic>;
> > + interrupts = <0 174 0x4>;
> > + };
>
> [...]
>
> > + i2c8: i2c@e6570000 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "renesas,rmobile-iic";
> > + reg = <0 0xe6570000 0 0x428>;
> > + interrupt-parent = <&gic>;
> > + interrupts = <0 173 0x4>;
> > + };
> > +
>
> Hm, this also adds a bunch of I2C controllers which is not mentioned in the
> changelog at all.
Rebase error ? They were not included in my original patch.
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 50+ messages in thread
* [PATCH 01/19] ARM: shmobile: r8a73a4: Add pin control device to device tree
@ 2013-07-19 12:42 ` Laurent Pinchart
0 siblings, 0 replies; 50+ messages in thread
From: Laurent Pinchart @ 2013-07-19 12:42 UTC (permalink / raw)
To: linux-arm-kernel
On Friday 19 July 2013 16:32:42 Sergei Shtylyov wrote:
> Hello.
>
> On 19-07-2013 8:36, Simon Horman wrote:
> > From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> >
> > Add a pfc node to the r8a73a4 device tree.
>
> This patch looks strange...
>
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@ideasonboard.com>
> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> > ---
> >
> > arch/arm/boot/dts/r8a73a4.dtsi | 88
> > ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 88
> > insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/r8a73a4.dtsi
> > b/arch/arm/boot/dts/r8a73a4.dtsi index 4ff2019..f1a35d5 100644
> > --- a/arch/arm/boot/dts/r8a73a4.dtsi
> > +++ b/arch/arm/boot/dts/r8a73a4.dtsi
> > @@ -85,4 +85,92 @@
> >
> > interrupt-parent = <&gic>;
> > interrupts = <0 69 4>;
> >
> > };
> >
> > +
> > + i2c0: i2c at e6500000 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "renesas,rmobile-iic";
> > + reg = <0 0xe6500000 0 0x428>;
> > + interrupt-parent = <&gic>;
> > + interrupts = <0 174 0x4>;
> > + };
>
> [...]
>
> > + i2c8: i2c at e6570000 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "renesas,rmobile-iic";
> > + reg = <0 0xe6570000 0 0x428>;
> > + interrupt-parent = <&gic>;
> > + interrupts = <0 173 0x4>;
> > + };
> > +
>
> Hm, this also adds a bunch of I2C controllers which is not mentioned in the
> changelog at all.
Rebase error ? They were not included in my original patch.
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [PATCH 01/19] ARM: shmobile: r8a73a4: Add pin control device to device tree
2013-07-19 12:42 ` Laurent Pinchart
@ 2013-07-22 0:43 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-22 0:43 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Jul 19, 2013 at 02:42:14PM +0200, Laurent Pinchart wrote:
> On Friday 19 July 2013 16:32:42 Sergei Shtylyov wrote:
> > Hello.
> >
> > On 19-07-2013 8:36, Simon Horman wrote:
> > > From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> > >
> > > Add a pfc node to the r8a73a4 device tree.
> >
> > This patch looks strange...
> >
> > > Signed-off-by: Laurent Pinchart
> > > <laurent.pinchart+renesas@ideasonboard.com>
> > > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> > > ---
> > >
> > > arch/arm/boot/dts/r8a73a4.dtsi | 88
> > > ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 88
> > > insertions(+)
> > >
> > > diff --git a/arch/arm/boot/dts/r8a73a4.dtsi
> > > b/arch/arm/boot/dts/r8a73a4.dtsi index 4ff2019..f1a35d5 100644
> > > --- a/arch/arm/boot/dts/r8a73a4.dtsi
> > > +++ b/arch/arm/boot/dts/r8a73a4.dtsi
> > > @@ -85,4 +85,92 @@
> > >
> > > interrupt-parent = <&gic>;
> > > interrupts = <0 69 4>;
> > >
> > > };
> > >
> > > +
> > > + i2c0: i2c@e6500000 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + compatible = "renesas,rmobile-iic";
> > > + reg = <0 0xe6500000 0 0x428>;
> > > + interrupt-parent = <&gic>;
> > > + interrupts = <0 174 0x4>;
> > > + };
> >
> > [...]
> >
> > > + i2c8: i2c@e6570000 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + compatible = "renesas,rmobile-iic";
> > > + reg = <0 0xe6570000 0 0x428>;
> > > + interrupt-parent = <&gic>;
> > > + interrupts = <0 173 0x4>;
> > > + };
> > > +
> >
> > Hm, this also adds a bunch of I2C controllers which is not mentioned in the
> > changelog at all.
>
> Rebase error ? They were not included in my original patch.
Sorry, I will correct that and repost.
^ permalink raw reply [flat|nested] 50+ messages in thread
* [PATCH 01/19] ARM: shmobile: r8a73a4: Add pin control device to device tree
@ 2013-07-22 0:43 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-22 0:43 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Jul 19, 2013 at 02:42:14PM +0200, Laurent Pinchart wrote:
> On Friday 19 July 2013 16:32:42 Sergei Shtylyov wrote:
> > Hello.
> >
> > On 19-07-2013 8:36, Simon Horman wrote:
> > > From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> > >
> > > Add a pfc node to the r8a73a4 device tree.
> >
> > This patch looks strange...
> >
> > > Signed-off-by: Laurent Pinchart
> > > <laurent.pinchart+renesas@ideasonboard.com>
> > > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> > > ---
> > >
> > > arch/arm/boot/dts/r8a73a4.dtsi | 88
> > > ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 88
> > > insertions(+)
> > >
> > > diff --git a/arch/arm/boot/dts/r8a73a4.dtsi
> > > b/arch/arm/boot/dts/r8a73a4.dtsi index 4ff2019..f1a35d5 100644
> > > --- a/arch/arm/boot/dts/r8a73a4.dtsi
> > > +++ b/arch/arm/boot/dts/r8a73a4.dtsi
> > > @@ -85,4 +85,92 @@
> > >
> > > interrupt-parent = <&gic>;
> > > interrupts = <0 69 4>;
> > >
> > > };
> > >
> > > +
> > > + i2c0: i2c at e6500000 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + compatible = "renesas,rmobile-iic";
> > > + reg = <0 0xe6500000 0 0x428>;
> > > + interrupt-parent = <&gic>;
> > > + interrupts = <0 174 0x4>;
> > > + };
> >
> > [...]
> >
> > > + i2c8: i2c at e6570000 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + compatible = "renesas,rmobile-iic";
> > > + reg = <0 0xe6570000 0 0x428>;
> > > + interrupt-parent = <&gic>;
> > > + interrupts = <0 173 0x4>;
> > > + };
> > > +
> >
> > Hm, this also adds a bunch of I2C controllers which is not mentioned in the
> > changelog at all.
>
> Rebase error ? They were not included in my original patch.
Sorry, I will correct that and repost.
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [GIT 00/19] Renesas ARM based SoC pinmux updates for v3.12
2013-07-19 4:36 ` Simon Horman
@ 2013-07-22 0:58 ` Simon Horman
-1 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-22 0:58 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
please hold off on this. It appears that there is a problem with
one of the patches.
On Fri, Jul 19, 2013 at 01:36:29PM +0900, Simon Horman wrote:
> The following changes since commit ad81f0545ef01ea651886dddac4bef6cec930092:
>
> Linux 3.11-rc1 (2013-07-14 15:18:27 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-pinmux-for-v3.12
>
> for you to fetch changes up to 838a7070ce8bfff11e19ed434edd9a4423b478bd:
>
> ARM: shmobile: kzm9g-reference: Add LED1-LED4 to the device tree (2013-07-16 12:55:04 +0900)
>
> ----------------------------------------------------------------
> Renesas ARM based SoC pinmux updates for v3.12
>
> SH Mobile pinctrl DT support
>
> ----------------------------------------------------------------
> Laurent Pinchart (19):
> ARM: shmobile: r8a73a4: Add pin control device to device tree
> ARM: shmobile: r8a7740: Add pin control device to device tree
> ARM: shmobile: r8a7778: Add pin control device to device tree
> ARM: shmobile: r8a7778: Add GPIO controller devices to device tree
> ARM: shmobile: r8a7779: Add pin control device to device tree
> ARM: shmobile: r8a7779: Add GPIO controller devices to device tree
> ARM: shmobile: r8a7790: Add pin control device to device tree
> ARM: shmobile: r8a7790: Add GPIO controller devices to device tree
> ARM: shmobile: sh7372: Add pin control device to device tree
> ARM: shmobile: sh73a0: Add pin control device to device tree
> ARM: shmobile: armadillo-reference: Move pinctrl mappings to device tree
> ARM: shmobile: armadillo-reference: Add st1232 pin mappings
> ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DT
> ARM: shmobile: armadillo-reference: Add LED1-LED4 to the device tree
> ARM: shmobile: marzen-reference: Move pinctrl mappings to device tree
> ARM: shmobile: marzen-reference: Add LED2-LED4 to the device tree
> ARM: shmobile: kzm9g-reference: Move pinctrl mappings to device tree
> ARM: shmobile: kzm9g-reference: Move SDHI regulators to DT
> ARM: shmobile: kzm9g-reference: Add LED1-LED4 to the device tree
>
> arch/arm/boot/dts/r8a73a4.dtsi | 88 +++++++++++++++++++
> .../boot/dts/r8a7740-armadillo800eva-reference.dts | 34 ++++++++
> arch/arm/boot/dts/r8a7740.dtsi | 8 ++
> arch/arm/boot/dts/r8a7778.dtsi | 66 ++++++++++++++
> arch/arm/boot/dts/r8a7779-marzen-reference.dts | 49 +++++++++++
> arch/arm/boot/dts/r8a7779.dtsi | 90 ++++++++++++++++++++
> arch/arm/boot/dts/r8a7790.dtsi | 78 +++++++++++++++++
> arch/arm/boot/dts/sh7372.dtsi | 8 ++
> arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 90 +++++++++++++++++++-
> arch/arm/boot/dts/sh73a0.dtsi | 8 ++
> .../board-armadillo800eva-reference.c | 18 +---
> arch/arm/mach-shmobile/board-kzm9g-reference.c | 47 ----------
> arch/arm/mach-shmobile/board-marzen-reference.c | 28 ------
> 13 files changed, 518 insertions(+), 94 deletions(-)
>
^ permalink raw reply [flat|nested] 50+ messages in thread
* [GIT 00/19] Renesas ARM based SoC pinmux updates for v3.12
@ 2013-07-22 0:58 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-22 0:58 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
please hold off on this. It appears that there is a problem with
one of the patches.
On Fri, Jul 19, 2013 at 01:36:29PM +0900, Simon Horman wrote:
> The following changes since commit ad81f0545ef01ea651886dddac4bef6cec930092:
>
> Linux 3.11-rc1 (2013-07-14 15:18:27 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-pinmux-for-v3.12
>
> for you to fetch changes up to 838a7070ce8bfff11e19ed434edd9a4423b478bd:
>
> ARM: shmobile: kzm9g-reference: Add LED1-LED4 to the device tree (2013-07-16 12:55:04 +0900)
>
> ----------------------------------------------------------------
> Renesas ARM based SoC pinmux updates for v3.12
>
> SH Mobile pinctrl DT support
>
> ----------------------------------------------------------------
> Laurent Pinchart (19):
> ARM: shmobile: r8a73a4: Add pin control device to device tree
> ARM: shmobile: r8a7740: Add pin control device to device tree
> ARM: shmobile: r8a7778: Add pin control device to device tree
> ARM: shmobile: r8a7778: Add GPIO controller devices to device tree
> ARM: shmobile: r8a7779: Add pin control device to device tree
> ARM: shmobile: r8a7779: Add GPIO controller devices to device tree
> ARM: shmobile: r8a7790: Add pin control device to device tree
> ARM: shmobile: r8a7790: Add GPIO controller devices to device tree
> ARM: shmobile: sh7372: Add pin control device to device tree
> ARM: shmobile: sh73a0: Add pin control device to device tree
> ARM: shmobile: armadillo-reference: Move pinctrl mappings to device tree
> ARM: shmobile: armadillo-reference: Add st1232 pin mappings
> ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DT
> ARM: shmobile: armadillo-reference: Add LED1-LED4 to the device tree
> ARM: shmobile: marzen-reference: Move pinctrl mappings to device tree
> ARM: shmobile: marzen-reference: Add LED2-LED4 to the device tree
> ARM: shmobile: kzm9g-reference: Move pinctrl mappings to device tree
> ARM: shmobile: kzm9g-reference: Move SDHI regulators to DT
> ARM: shmobile: kzm9g-reference: Add LED1-LED4 to the device tree
>
> arch/arm/boot/dts/r8a73a4.dtsi | 88 +++++++++++++++++++
> .../boot/dts/r8a7740-armadillo800eva-reference.dts | 34 ++++++++
> arch/arm/boot/dts/r8a7740.dtsi | 8 ++
> arch/arm/boot/dts/r8a7778.dtsi | 66 ++++++++++++++
> arch/arm/boot/dts/r8a7779-marzen-reference.dts | 49 +++++++++++
> arch/arm/boot/dts/r8a7779.dtsi | 90 ++++++++++++++++++++
> arch/arm/boot/dts/r8a7790.dtsi | 78 +++++++++++++++++
> arch/arm/boot/dts/sh7372.dtsi | 8 ++
> arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 90 +++++++++++++++++++-
> arch/arm/boot/dts/sh73a0.dtsi | 8 ++
> .../board-armadillo800eva-reference.c | 18 +---
> arch/arm/mach-shmobile/board-kzm9g-reference.c | 47 ----------
> arch/arm/mach-shmobile/board-marzen-reference.c | 28 ------
> 13 files changed, 518 insertions(+), 94 deletions(-)
>
^ permalink raw reply [flat|nested] 50+ messages in thread
* [PATCH 17/19] ARM: shmobile: kzm9g-reference: Move pinctrl mappings to device tree
2013-07-24 0:32 [GIT 00/19 v2] " Simon Horman
@ 2013-07-24 0:32 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-24 0:32 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Replace the pinctrl mappings in board code by device tree mappings.
For devices that are still instantiated from board code reference the
mappings as the default pin controller state to apply them at boot time.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 51 ++++++++++++++++++++++++++
arch/arm/mach-shmobile/board-kzm9g-reference.c | 40 --------------------
2 files changed, 51 insertions(+), 40 deletions(-)
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index b6f759e..11ae9ad 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -145,19 +145,70 @@
};
};
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+};
+
&mmcif {
+ pinctrl-0 = <&mmcif_pins>;
+ pinctrl-names = "default";
+
bus-width = <8>;
vmmc-supply = <®_1p8v>;
status = "okay";
};
+&pfc {
+ pinctrl-0 = <&scifa4_pins>;
+ pinctrl-names = "default";
+
+ i2c3_pins: i2c3 {
+ renesas,groups = "i2c3_1";
+ renesas,function = "i2c3";
+ };
+
+ mmcif_pins: mmcif {
+ mux {
+ renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
+ renesas,function = "mmc0";
+ };
+ cfg {
+ renesas,groups = "mmc0_data8_0";
+ renesas,pins = "PORT279";
+ bias-pull-up;
+ };
+ };
+
+ scifa4_pins: scifa4 {
+ renesas,groups = "scifa4_data", "scifa4_ctrl";
+ renesas,function = "scifa4";
+ };
+
+ sdhi0_pins: sdhi0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
+ renesas,function = "sdhi0";
+ };
+
+ sdhi2_pins: sdhi2 {
+ renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+ renesas,function = "sdhi2";
+ };
+};
+
&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
vmmc-supply = <®_3p3v>;
bus-width = <4>;
status = "okay";
};
&sdhi2 {
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-names = "default";
+
vmmc-supply = <®_3p3v>;
bus-width = <4>;
broken-cd;
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index 6ff6ca2..fc2bb37 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -27,55 +27,15 @@
#include <linux/irqchip.h>
#include <linux/input.h>
#include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
#include <mach/sh73a0.h>
#include <mach/common.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-static unsigned long pin_pullup_conf[] = {
- PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
-};
-
-static const struct pinctrl_map kzm_pinctrl_map[] = {
- PIN_MAP_MUX_GROUP_DEFAULT("e6826000.i2c", "e6050000.pfc",
- "i2c3_1", "i2c3"),
- /* MMCIF */
- PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
- "mmc0_data8_0", "mmc0"),
- PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
- "mmc0_ctrl_0", "mmc0"),
- PIN_MAP_CONFIGS_PIN_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
- "PORT279", pin_pullup_conf),
- PIN_MAP_CONFIGS_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
- "mmc0_data8_0", pin_pullup_conf),
- /* SCIFA4 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "e6050000.pfc",
- "scifa4_data", "scifa4"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "e6050000.pfc",
- "scifa4_ctrl", "scifa4"),
- /* SDHI0 */
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
- "sdhi0_data4", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
- "sdhi0_ctrl", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
- "sdhi0_cd", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
- "sdhi0_wp", "sdhi0"),
- /* SDHI2 */
- PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "e6050000.pfc",
- "sdhi2_data4", "sdhi2"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "e6050000.pfc",
- "sdhi2_ctrl", "sdhi2"),
-};
-
static void __init kzm_init(void)
{
sh73a0_add_standard_devices_dt();
- pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map));
/* enable SD */
gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
--
1.8.2.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH 17/19] ARM: shmobile: kzm9g-reference: Move pinctrl mappings to device tree
@ 2013-07-24 0:32 ` Simon Horman
0 siblings, 0 replies; 50+ messages in thread
From: Simon Horman @ 2013-07-24 0:32 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Replace the pinctrl mappings in board code by device tree mappings.
For devices that are still instantiated from board code reference the
mappings as the default pin controller state to apply them at boot time.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 51 ++++++++++++++++++++++++++
arch/arm/mach-shmobile/board-kzm9g-reference.c | 40 --------------------
2 files changed, 51 insertions(+), 40 deletions(-)
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index b6f759e..11ae9ad 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -145,19 +145,70 @@
};
};
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+};
+
&mmcif {
+ pinctrl-0 = <&mmcif_pins>;
+ pinctrl-names = "default";
+
bus-width = <8>;
vmmc-supply = <®_1p8v>;
status = "okay";
};
+&pfc {
+ pinctrl-0 = <&scifa4_pins>;
+ pinctrl-names = "default";
+
+ i2c3_pins: i2c3 {
+ renesas,groups = "i2c3_1";
+ renesas,function = "i2c3";
+ };
+
+ mmcif_pins: mmcif {
+ mux {
+ renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
+ renesas,function = "mmc0";
+ };
+ cfg {
+ renesas,groups = "mmc0_data8_0";
+ renesas,pins = "PORT279";
+ bias-pull-up;
+ };
+ };
+
+ scifa4_pins: scifa4 {
+ renesas,groups = "scifa4_data", "scifa4_ctrl";
+ renesas,function = "scifa4";
+ };
+
+ sdhi0_pins: sdhi0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
+ renesas,function = "sdhi0";
+ };
+
+ sdhi2_pins: sdhi2 {
+ renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+ renesas,function = "sdhi2";
+ };
+};
+
&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
vmmc-supply = <®_3p3v>;
bus-width = <4>;
status = "okay";
};
&sdhi2 {
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-names = "default";
+
vmmc-supply = <®_3p3v>;
bus-width = <4>;
broken-cd;
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index 6ff6ca2..fc2bb37 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -27,55 +27,15 @@
#include <linux/irqchip.h>
#include <linux/input.h>
#include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
#include <mach/sh73a0.h>
#include <mach/common.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-static unsigned long pin_pullup_conf[] = {
- PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
-};
-
-static const struct pinctrl_map kzm_pinctrl_map[] = {
- PIN_MAP_MUX_GROUP_DEFAULT("e6826000.i2c", "e6050000.pfc",
- "i2c3_1", "i2c3"),
- /* MMCIF */
- PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
- "mmc0_data8_0", "mmc0"),
- PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
- "mmc0_ctrl_0", "mmc0"),
- PIN_MAP_CONFIGS_PIN_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
- "PORT279", pin_pullup_conf),
- PIN_MAP_CONFIGS_GROUP_DEFAULT("e6bd0000.mmcif", "e6050000.pfc",
- "mmc0_data8_0", pin_pullup_conf),
- /* SCIFA4 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "e6050000.pfc",
- "scifa4_data", "scifa4"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "e6050000.pfc",
- "scifa4_ctrl", "scifa4"),
- /* SDHI0 */
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
- "sdhi0_data4", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
- "sdhi0_ctrl", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
- "sdhi0_cd", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "e6050000.pfc",
- "sdhi0_wp", "sdhi0"),
- /* SDHI2 */
- PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "e6050000.pfc",
- "sdhi2_data4", "sdhi2"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "e6050000.pfc",
- "sdhi2_ctrl", "sdhi2"),
-};
-
static void __init kzm_init(void)
{
sh73a0_add_standard_devices_dt();
- pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map));
/* enable SD */
gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
--
1.8.2.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
end of thread, other threads:[~2013-07-24 0:32 UTC | newest]
Thread overview: 50+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-07-19 4:36 [GIT 00/19] Renesas ARM based SoC pinmux updates for v3.12 Simon Horman
2013-07-19 4:36 ` Simon Horman
2013-07-19 4:36 ` [PATCH 01/19] ARM: shmobile: r8a73a4: Add pin control device to device tree Simon Horman
2013-07-19 4:36 ` Simon Horman
2013-07-19 12:32 ` Sergei Shtylyov
2013-07-19 12:32 ` Sergei Shtylyov
2013-07-19 12:42 ` Laurent Pinchart
2013-07-19 12:42 ` Laurent Pinchart
2013-07-22 0:43 ` Simon Horman
2013-07-22 0:43 ` Simon Horman
2013-07-19 4:36 ` [PATCH 02/19] ARM: shmobile: r8a7740: " Simon Horman
2013-07-19 4:36 ` Simon Horman
2013-07-19 4:36 ` [PATCH 03/19] ARM: shmobile: r8a7778: " Simon Horman
2013-07-19 4:36 ` Simon Horman
2013-07-19 4:36 ` [PATCH 04/19] ARM: shmobile: r8a7778: Add GPIO controller devices " Simon Horman
2013-07-19 4:36 ` Simon Horman
2013-07-19 4:36 ` [PATCH 05/19] ARM: shmobile: r8a7779: Add pin control device " Simon Horman
2013-07-19 4:36 ` Simon Horman
2013-07-19 4:37 ` [PATCH 06/19] ARM: shmobile: r8a7779: Add GPIO controller devices " Simon Horman
2013-07-19 4:37 ` Simon Horman
2013-07-19 4:37 ` [PATCH 07/19] ARM: shmobile: r8a7790: Add pin control device " Simon Horman
2013-07-19 4:37 ` Simon Horman
2013-07-19 4:37 ` [PATCH 08/19] ARM: shmobile: r8a7790: Add GPIO controller devices " Simon Horman
2013-07-19 4:37 ` Simon Horman
2013-07-19 4:37 ` [PATCH 09/19] ARM: shmobile: sh7372: Add pin control device " Simon Horman
2013-07-19 4:37 ` Simon Horman
2013-07-19 4:37 ` [PATCH 10/19] ARM: shmobile: sh73a0: " Simon Horman
2013-07-19 4:37 ` Simon Horman
2013-07-19 4:37 ` [PATCH 11/19] ARM: shmobile: armadillo-reference: Move pinctrl mappings " Simon Horman
2013-07-19 4:37 ` Simon Horman
2013-07-19 4:37 ` [PATCH 12/19] ARM: shmobile: armadillo-reference: Add st1232 pin mappings Simon Horman
2013-07-19 4:37 ` Simon Horman
2013-07-19 4:37 ` [PATCH 13/19] ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DT Simon Horman
2013-07-19 4:37 ` Simon Horman
2013-07-19 4:37 ` [PATCH 14/19] ARM: shmobile: armadillo-reference: Add LED1-LED4 to the device tree Simon Horman
2013-07-19 4:37 ` Simon Horman
2013-07-19 4:37 ` [PATCH 15/19] ARM: shmobile: marzen-reference: Move pinctrl mappings to " Simon Horman
2013-07-19 4:37 ` Simon Horman
2013-07-19 4:37 ` [PATCH 16/19] ARM: shmobile: marzen-reference: Add LED2-LED4 to the " Simon Horman
2013-07-19 4:37 ` Simon Horman
2013-07-19 4:37 ` [PATCH 17/19] ARM: shmobile: kzm9g-reference: Move pinctrl mappings to " Simon Horman
2013-07-19 4:37 ` Simon Horman
2013-07-19 4:37 ` [PATCH 18/19] ARM: shmobile: kzm9g-reference: Move SDHI regulators to DT Simon Horman
2013-07-19 4:37 ` Simon Horman
2013-07-19 4:37 ` [PATCH 19/19] ARM: shmobile: kzm9g-reference: Add LED1-LED4 to the device tree Simon Horman
2013-07-19 4:37 ` Simon Horman
2013-07-22 0:58 ` [GIT 00/19] Renesas ARM based SoC pinmux updates for v3.12 Simon Horman
2013-07-22 0:58 ` Simon Horman
2013-07-24 0:32 [GIT 00/19 v2] " Simon Horman
2013-07-24 0:32 ` [PATCH 17/19] ARM: shmobile: kzm9g-reference: Move pinctrl mappings to device tree Simon Horman
2013-07-24 0:32 ` Simon Horman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.