* [SPDK] 在ceph中使能spdk,必须使用intel的nvme ssd吗?我用的东芝的找不到nvme device。
@ 2018-04-28 8:31
0 siblings, 0 replies; only message in thread
From: @ 2018-04-28 8:31 UTC (permalink / raw)
To: spdk
[-- Attachment #1: Type: text/plain, Size: 4479 bytes --]
hi 子夜,
子夜,您好,我是之前联系过你的杨亮。今年三月份我也参加了spdk峰会,当时有听你的nvmf的介绍。 我现在用东芝的nvme ssd 在ceph中使能spdk可以吗?我现在没有intel的nvme ssd。 非常感谢
东芝nvme ssd的信息:
0005:01:00.0 Non-Volatile memory controller: Toshiba America Info Systems Device 010e (rev 01) (prog-if 02 [NVM Express])
Subsystem: Toshiba America Info Systems Device 0002
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 258
NUMA node: 0
Region 0: Memory at e0100100000 (64-bit, non-prefetchable) [size=1M]
Expansion ROM at e0100200000 [disabled] [size=512K]
Capabilities: [60] Vital Product Data
Product Name: TOSHIBA SSD
Read-only fields:
[PN] Part number: PX04PMC080
[EC] Engineering changes: 0001 bluestore_block_path = spdk:5780A001A5KD bluestore_block_path = spdk:PX04PMC080 时,都会出现这个错误:“bdev() open failed to get nvme device with sn XXXXXXX”
[SN] Serial number: 5780A001A5KD
[MN] Manufacture ID: 31 31 37 39
[RV] Reserved: checksum good, 26 byte(s) reserved
End
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable- Count=1/32 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [b0] MSI-X: Enable- Count=129 Masked-
Vector table: BAR=0 offset=00081000
PBA: BAR=0 offset=00089000
Capabilities: [c0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 512 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x4, ASPM not supported, Exit Latency L0s <1us, L1 <16us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, EqualizationPhase1+
EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn+ ChkCap+ ChkEn+
Capabilities: [300 v1] #19
Kernel driver in use: vfio-pci
Kernel modules: nvme
[-- Attachment #2: attachment.html --]
[-- Type: text/html, Size: 8071 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2018-04-28 8:31 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-04-28 8:31 [SPDK] 在ceph中使能spdk,必须使用intel的nvme ssd吗?我用的东芝的找不到nvme device。
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.