* [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) @ 2010-11-18 20:00 Pasi Kärkkäinen 2010-11-18 20:14 ` Digimer ` (3 more replies) 0 siblings, 4 replies; 46+ messages in thread From: Pasi Kärkkäinen @ 2010-11-18 20:00 UTC (permalink / raw) To: xen-devel; +Cc: xen-users Hello, If you're interested in running Xen 4.0 hypervisor/dom0 on RHEL6, take a look at here: http://wiki.xen.org/xenwiki/RHEL6Xen4Tutorial It explains steps needed to rebuild Xen 4.0.1 src.rpm from Fedora on RHEL6, and how to fetch dom0 capable 2.6.32.x kernel from upstream git repository. It also shows how to get libvirt/virt-manager working with Xen on RHEL6. Hopefully it helps :) -- Pasi ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-18 20:00 [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) Pasi Kärkkäinen @ 2010-11-18 20:14 ` Digimer 2010-11-18 20:37 ` [Xen-users] " Pasi Kärkkäinen 2010-11-23 11:55 ` [Xen-devel] " Boris Derzhavets 2010-11-18 20:23 ` Rudi Ahlers ` (2 subsequent siblings) 3 siblings, 2 replies; 46+ messages in thread From: Digimer @ 2010-11-18 20:14 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: xen-devel, xen-users On 11/18/2010 03:00 PM, Pasi Kärkkäinen wrote: > Hello, > > If you're interested in running Xen 4.0 hypervisor/dom0 on RHEL6, > take a look at here: http://wiki.xen.org/xenwiki/RHEL6Xen4Tutorial > > It explains steps needed to rebuild Xen 4.0.1 src.rpm from Fedora on RHEL6, > and how to fetch dom0 capable 2.6.32.x kernel from upstream git repository. > > It also shows how to get libvirt/virt-manager working with Xen on RHEL6. > > Hopefully it helps :) > > -- Pasi I was in the middle of trying to resolve the dependencies yesterday and today. I'll give this a run through and provide feedback when done. Thanks kindly! -- Digimer E-Mail: digimer@alteeve.com AN!Whitepapers: http://alteeve.com Node Assassin: http://nodeassassin.org ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-18 20:14 ` Digimer @ 2010-11-18 20:37 ` Pasi Kärkkäinen 2010-11-29 18:40 ` [Xen-devel] " Boris Derzhavets 2010-11-29 19:40 ` Boris Derzhavets 2010-11-23 11:55 ` [Xen-devel] " Boris Derzhavets 1 sibling, 2 replies; 46+ messages in thread From: Pasi Kärkkäinen @ 2010-11-18 20:37 UTC (permalink / raw) To: Digimer; +Cc: xen-devel, xen-users On Thu, Nov 18, 2010 at 03:14:32PM -0500, Digimer wrote: > On 11/18/2010 03:00 PM, Pasi Kärkkäinen wrote: >> Hello, >> >> If you're interested in running Xen 4.0 hypervisor/dom0 on RHEL6, >> take a look at here: http://wiki.xen.org/xenwiki/RHEL6Xen4Tutorial >> >> It explains steps needed to rebuild Xen 4.0.1 src.rpm from Fedora on RHEL6, >> and how to fetch dom0 capable 2.6.32.x kernel from upstream git repository. >> >> It also shows how to get libvirt/virt-manager working with Xen on RHEL6. >> >> Hopefully it helps :) >> >> -- Pasi > > I was in the middle of trying to resolve the dependencies yesterday and > today. I'll give this a run through and provide feedback when done. > Thanks kindly! > All that should be fine.. if not, let me know, and I'll fix it! -- Pasi ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Xen-devel] Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-18 20:37 ` [Xen-users] " Pasi Kärkkäinen @ 2010-11-29 18:40 ` Boris Derzhavets 2010-11-29 19:40 ` Boris Derzhavets 1 sibling, 0 replies; 46+ messages in thread From: Boris Derzhavets @ 2010-11-29 18:40 UTC (permalink / raw) To: Digimer, Pasi Kärkkäinen; +Cc: xen-devel, xen-users [-- Attachment #1.1: Type: text/plain, Size: 7203 bytes --] ---------------------------------------------------------------------------- Just one line has to be edited in MY's kernel.spec for F12 ---------------------------------------------------------------------------- [root@ServerTest x86_64]# ./inst.sh Loaded plugins: refresh-packagekit, rhnplugin Setting up Install Process Examining kernel-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-2.6.32.26-174.xendom0.el6.x86_64 Marking kernel-2.6.32.26-174.xendom0.el6.x86_64.rpm as an update to kernel-2.6.32-71.el6.x86_64 Examining kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64 Marking kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64.rpm to be installed Examining kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64 Marking kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64.rpm to be installed Examining kernel-devel-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-devel-2.6.32.26-174.xendom0.el6.x86_64 Marking kernel-devel-2.6.32.26-174.xendom0.el6.x86_64.rpm as an update to kernel-devel-2.6.32-71.el6.x86_64 Examining kernel-headers-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-headers-2.6.32.26-174.xendom0.el6.x86_64 Marking kernel-headers-2.6.32.26-174.xendom0.el6.x86_64.rpm as an update to kernel-headers-2.6.32-71.el6.x86_64 Resolving Dependencies --> Running transaction check ---> Package kernel.x86_64 0:2.6.32.26-174.xendom0.el6 set to be installed ---> Package kernel-debuginfo.x86_64 0:2.6.32.26-174.xendom0.el6 set to be updated ---> Package kernel-debuginfo-common-x86_64.x86_64 0:2.6.32.26-174.xendom0.el6 set to be updated ---> Package kernel-devel.x86_64 0:2.6.32.26-174.xendom0.el6 set to be installed ---> Package kernel-headers.x86_64 0:2.6.32.26-174.xendom0.el6 set to be updated --> Finished Dependency Resolution Dependencies Resolved =================================================================================================================== Package Arch Version Repository Size =================================================================================================================== Installing: kernel x86_64 2.6.32.26-174.xendom0.el6 /kernel-2.6.32.26-174.xendom0.el6.x86_64 91 M kernel-debuginfo x86_64 2.6.32.26-174.xendom0.el6 /kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64 1.1 G kernel-debuginfo-common-x86_64 x86_64 2.6.32.26-174.xendom0.el6 /kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64 151 M kernel-devel x86_64 2.6.32.26-174.xendom0.el6 /kernel-devel-2.6.32.26-174.xendom0.el6.x86_64 22 M Updating: kernel-headers x86_64 2.6.32.26-174.xendom0.el6 /kernel-headers-2.6.32.26-174.xendom0.el6.x86_64 2.3 M Transaction Summary =================================================================================================================== Install 4 Package(s) Upgrade 1 Package(s) Total size: 1.4 G Is this ok [y/N]: y Downloading Packages: Running rpm_check_debug Running Transaction Test Transaction Test Succeeded Running Transaction Installing : kernel-2.6.32.26-174.xendom0.el6.x86_64 1/6 grubby fatal error: unable to find a suitable template => May be ignored Installing : kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64 2/6 Installing : kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64 3/6 Updating : kernel-headers-2.6.32.26-174.xendom0.el6.x86_64 4/6 Installing : kernel-devel-2.6.32.26-174.xendom0.el6.x86_64 5/6 Cleanup : kernel-headers-2.6.32-71.el6.x86_64 6/6 Installed: kernel.x86_64 0:2.6.32.26-174.xendom0.el6 kernel-debuginfo.x86_64 0:2.6.32.26-174.xendom0.el6 kernel-debuginfo-common-x86_64.x86_64 0:2.6.32.26-174.xendom0.el6 kernel-devel.x86_64 0:2.6.32.26-174.xendom0.el6 Updated: kernel-headers.x86_64 0:2.6.32.26-174.xendom0.el6 Complete! Reboot with new kernel [root@ServerTest ~]# xm info host : ServerTest release : 2.6.32.26-174.xendom0.el6.x86_64 version : #1 SMP Mon Nov 29 20:12:24 MSK 2010 machine : x86_64 nr_cpus : 4 nr_nodes : 1 cores_per_socket : 4 threads_per_core : 1 cpu_mhz : 2833 hw_caps : bfebfbff:20100800:00000000:00000940:0008e3fd:00000000:00000001:00000000 virt_caps : hvm total_memory : 8190 free_memory : 7070 node_to_cpu : node0:0-3 node_to_memory : node0:7070 node_to_dma32_mem : node0:3259 max_node_id : 0 xen_major : 4 xen_minor : 0 xen_extra : .1 xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64 xen_scheduler : credit xen_pagesize : 4096 platform_params : virt_start=0xffff800000000000 xen_changeset : unavailable xen_commandline : dom0_mem=1024M loglvl=all guest_loglvl=all cc_compiler : gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) cc_compile_by : root cc_compile_domain : (none) cc_compile_date : Mon Nov 29 10:24:07 MSK 2010 xend_config_format : 4 Boris. --- On Thu, 11/18/10, Pasi Kärkkäinen <pasik@iki.fi> wrote: From: Pasi Kärkkäinen <pasik@iki.fi> Subject: [Xen-devel] Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) To: "Digimer" <linux@alteeve.com> Cc: xen-devel@lists.xensource.com, xen-users@lists.xensource.com Date: Thursday, November 18, 2010, 3:37 PM On Thu, Nov 18, 2010 at 03:14:32PM -0500, Digimer wrote: > On 11/18/2010 03:00 PM, Pasi Kärkkäinen wrote: >> Hello, >> >> If you're interested in running Xen 4.0 hypervisor/dom0 on RHEL6, >> take a look at here: http://wiki.xen.org/xenwiki/RHEL6Xen4Tutorial >> >> It explains steps needed to rebuild Xen 4.0.1 src.rpm from Fedora on RHEL6, >> and how to fetch dom0 capable 2.6.32.x kernel from upstream git repository. >> >> It also shows how to get libvirt/virt-manager working with Xen on RHEL6. >> >> Hopefully it helps :) >> >> -- Pasi > > I was in the middle of trying to resolve the dependencies yesterday and > today. I'll give this a run through and provide feedback when done. > Thanks kindly! > All that should be fine.. if not, let me know, and I'll fix it! -- Pasi _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel [-- Attachment #1.2: Type: text/html, Size: 12892 bytes --] [-- Attachment #2: Type: text/plain, Size: 137 bytes --] _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Xen-devel] Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-18 20:37 ` [Xen-users] " Pasi Kärkkäinen 2010-11-29 18:40 ` [Xen-devel] " Boris Derzhavets @ 2010-11-29 19:40 ` Boris Derzhavets 2010-11-30 3:50 ` Digimer 2010-11-30 18:29 ` Pasi Kärkkäinen 1 sibling, 2 replies; 46+ messages in thread From: Boris Derzhavets @ 2010-11-29 19:40 UTC (permalink / raw) To: Digimer, Pasi Kärkkäinen; +Cc: xen-devel, xen-users [-- Attachment #1.1: Type: text/plain, Size: 1501 bytes --] Could it be considered as update for "HOWTO" ? http://bderzhavets.wordpress.com/2010/11/29/rebuild-kernel-2-6-32-26-174-xendom0-fc12-src-rpm-on-rhel-server-6/ Boris. --- On Thu, 11/18/10, Pasi Kärkkäinen <pasik@iki.fi> wrote: From: Pasi Kärkkäinen <pasik@iki.fi> Subject: [Xen-devel] Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) To: "Digimer" <linux@alteeve.com> Cc: xen-devel@lists.xensource.com, xen-users@lists.xensource.com Date: Thursday, November 18, 2010, 3:37 PM On Thu, Nov 18, 2010 at 03:14:32PM -0500, Digimer wrote: > On 11/18/2010 03:00 PM, Pasi Kärkkäinen wrote: >> Hello, >> >> If you're interested in running Xen 4.0 hypervisor/dom0 on RHEL6, >> take a look at here: http://wiki.xen.org/xenwiki/RHEL6Xen4Tutorial >> >> It explains steps needed to rebuild Xen 4.0.1 src.rpm from Fedora on RHEL6, >> and how to fetch dom0 capable 2.6.32.x kernel from upstream git repository. >> >> It also shows how to get libvirt/virt-manager working with Xen on RHEL6. >> >> Hopefully it helps :) >> >> -- Pasi > > I was in the middle of trying to resolve the dependencies yesterday and > today. I'll give this a run through and provide feedback when done. > Thanks kindly! > All that should be fine.. if not, let me know, and I'll fix it! -- Pasi _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel [-- Attachment #1.2: Type: text/html, Size: 2247 bytes --] [-- Attachment #2: Type: text/plain, Size: 137 bytes --] _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Xen-devel] Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-29 19:40 ` Boris Derzhavets @ 2010-11-30 3:50 ` Digimer 2010-11-30 6:04 ` Boris Derzhavets 2010-12-01 9:11 ` Re: [Xen-users] " Boris Derzhavets 2010-11-30 18:29 ` Pasi Kärkkäinen 1 sibling, 2 replies; 46+ messages in thread From: Digimer @ 2010-11-30 3:50 UTC (permalink / raw) To: Boris Derzhavets; +Cc: xen-devel, xen-users, Pasi Kärkkäinen On 11/29/2010 02:40 PM, Boris Derzhavets wrote: > Could it be considered as update for "HOWTO" ? > > http://bderzhavets.wordpress.com/2010/11/29/rebuild-kernel-2-6-32-26-174-xendom0-fc12-src-rpm-on-rhel-server-6/ > > Boris. I ran through this tonight, and I did get it working and installed, so thank you. :) If I can make a couple suggestions? 1. Provide a downloadable patch file and and example showing how to use patch for those who might be less familiar with it. 2. After compile and install, disable the epel repo as it triggers these errors: ------------------------------------------------------------------------ [root@an-node03 x86_64]# yum update Loaded plugins: refresh-packagekit, rhnplugin epel | 3.7 kB 00:00 epel/primary_db | 3.4 MB 00:07 rhel-x86_64-server-6 | 1.8 kB 00:00 rhel-x86_64-server-6/primary | 1.6 MB 00:03 rhel-x86_64-server-6 3562/3562 rhel-x86_64-server-ha-6 | 1.8 kB 00:00 rhel-x86_64-server-ha-6/primary | 13 kB 00:00 rhel-x86_64-server-ha-6 35/35 rhel-x86_64-server-optional-6 | 1.6 kB 00:00 rhel-x86_64-server-optional-6/primary| 695 kB 00:01 rhel-x86_64-server-optional-6 2672/2672 Setting up Update Process Resolving Dependencies --> Running transaction check --> Processing Dependency: pkgconfig(augeas) >= 0.5.0 for package: netcf-devel-0.1.6-4.el6.x86_64 ---> Package augeas-devel.x86_64 0:0.7.3-1.el5 set to be updated --> Processing Dependency: augeas-libs = 0.7.2-3.el6 for package: augeas-devel-0.7.2-3.el6.i686 ---> Package augeas-libs.x86_64 0:0.7.3-1.el5 set to be updated ---> Package cvs.x86_64 0:1.11.23-11.el6_0.1 set to be updated ---> Package fontpackages-filesystem.noarch 0:1.44-1.el5.1 set to be updated ---> Package iwl6000-firmware.noarch 0:9.193.4.1-1.el5 set to be updated ---> Package libldb.x86_64 0:0.9.10-25.el5 set to be updated ---> Package libtalloc.x86_64 0:2.0.1-7.el5 set to be updated ---> Package libtdb.x86_64 0:1.2.1-4.el5 set to be updated ---> Package python-nose.noarch 0:0.11.3-2.el5 set to be updated --> Processing Dependency: python(abi) = 2.4 for package: python-nose-0.11.3-2.el5.noarch ---> Package python-paramiko.noarch 0:1.7.6-1.el5 set to be updated --> Processing Dependency: python(abi) = 2.4 for package: python-paramiko-1.7.6-1.el5.noarch ---> Package xorg-x11-drv-qxl.x86_64 0:0.0.12-2.1.el6_0.1 set to be updated --> Running transaction check ---> Package augeas-devel.i686 0:0.7.2-3.el6 set to be updated ---> Package augeas-libs.i686 0:0.7.2-3.el6 set to be updated --> Processing Dependency: libselinux.so.1 for package: augeas-libs-0.7.2-3.el6.i686 ---> Package python-nose.noarch 0:0.11.3-2.el5 set to be updated --> Processing Dependency: python(abi) = 2.4 for package: python-nose-0.11.3-2.el5.noarch ---> Package python-paramiko.noarch 0:1.7.6-1.el5 set to be updated --> Processing Dependency: python(abi) = 2.4 for package: python-paramiko-1.7.6-1.el5.noarch --> Running transaction check ---> Package libselinux.i686 0:2.0.94-2.el6 set to be updated ---> Package python-nose.noarch 0:0.11.3-2.el5 set to be updated --> Processing Dependency: python(abi) = 2.4 for package: python-nose-0.11.3-2.el5.noarch ---> Package python-paramiko.noarch 0:1.7.6-1.el5 set to be updated --> Processing Dependency: python(abi) = 2.4 for package: python-paramiko-1.7.6-1.el5.noarch --> Finished Dependency Resolution Error: Package: python-nose-0.11.3-2.el5.noarch (epel) Requires: python(abi) = 2.4 Installed: python-2.6.5-3.el6.x86_64 (@Red Hat Enterprise Linux/6.0) python(abi) = 2.6 Available: python26-2.6.5-5.el5.x86_64 (epel) python(abi) = 2.6 Error: Package: python-paramiko-1.7.6-1.el5.noarch (epel) Requires: python(abi) = 2.4 Installed: python-2.6.5-3.el6.x86_64 (@Red Hat Enterprise Linux/6.0) python(abi) = 2.6 Available: python26-2.6.5-5.el5.x86_64 (epel) python(abi) = 2.6 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest ------------------------------------------------------------------------ I had to change /etc/yum.repos.d/epel.repo to 'enabled=0' and then run 'yum clean all && yum update' to get yum running again. These are small issues though, and I'd vote for a reference in Pasi's tutorial as an option against compiling from source (though I'd leave that option in place). I would like to use this to add myoung's kernel as an option in pxdi, if that is ok with you. -- Digimer E-Mail: digimer@alteeve.com AN!Whitepapers: http://alteeve.com Node Assassin: http://nodeassassin.org ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Xen-devel] Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-30 3:50 ` Digimer @ 2010-11-30 6:04 ` Boris Derzhavets 2010-11-30 14:43 ` Digimer 2010-12-01 9:11 ` Re: [Xen-users] " Boris Derzhavets 1 sibling, 1 reply; 46+ messages in thread From: Boris Derzhavets @ 2010-11-30 6:04 UTC (permalink / raw) To: Digimer; +Cc: xen-devel, xen-users, Pasi Kärkkäinen [-- Attachment #1.1: Type: text/plain, Size: 5447 bytes --] > I would like to use this to add myoung's kernel as an option in pxdi, if that is ok with you. What is pxdi ? Boris. --- On Mon, 11/29/10, Digimer <linux@alteeve.com> wrote: From: Digimer <linux@alteeve.com> Subject: Re: [Xen-devel] Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: "Pasi Kärkkäinen" <pasik@iki.fi>, xen-devel@lists.xensource.com, xen-users@lists.xensource.com Date: Monday, November 29, 2010, 10:50 PM On 11/29/2010 02:40 PM, Boris Derzhavets wrote: > Could it be considered as update for "HOWTO" ? > > http://bderzhavets.wordpress.com/2010/11/29/rebuild-kernel-2-6-32-26-174-xendom0-fc12-src-rpm-on-rhel-server-6/ > > Boris. I ran through this tonight, and I did get it working and installed, so thank you. :) If I can make a couple suggestions? 1. Provide a downloadable patch file and and example showing how to use patch for those who might be less familiar with it. 2. After compile and install, disable the epel repo as it triggers these errors: ------------------------------------------------------------------------ [root@an-node03 x86_64]# yum update Loaded plugins: refresh-packagekit, rhnplugin epel | 3.7 kB 00:00 epel/primary_db | 3.4 MB 00:07 rhel-x86_64-server-6 | 1.8 kB 00:00 rhel-x86_64-server-6/primary | 1.6 MB 00:03 rhel-x86_64-server-6 3562/3562 rhel-x86_64-server-ha-6 | 1.8 kB 00:00 rhel-x86_64-server-ha-6/primary | 13 kB 00:00 rhel-x86_64-server-ha-6 35/35 rhel-x86_64-server-optional-6 | 1.6 kB 00:00 rhel-x86_64-server-optional-6/primary| 695 kB 00:01 rhel-x86_64-server-optional-6 2672/2672 Setting up Update Process Resolving Dependencies --> Running transaction check --> Processing Dependency: pkgconfig(augeas) >= 0.5.0 for package: netcf-devel-0.1.6-4.el6.x86_64 ---> Package augeas-devel.x86_64 0:0.7.3-1.el5 set to be updated --> Processing Dependency: augeas-libs = 0.7.2-3.el6 for package: augeas-devel-0.7.2-3.el6.i686 ---> Package augeas-libs.x86_64 0:0.7.3-1.el5 set to be updated ---> Package cvs.x86_64 0:1.11.23-11.el6_0.1 set to be updated ---> Package fontpackages-filesystem.noarch 0:1.44-1.el5.1 set to be updated ---> Package iwl6000-firmware.noarch 0:9.193.4.1-1.el5 set to be updated ---> Package libldb.x86_64 0:0.9.10-25.el5 set to be updated ---> Package libtalloc.x86_64 0:2.0.1-7.el5 set to be updated ---> Package libtdb.x86_64 0:1.2.1-4.el5 set to be updated ---> Package python-nose.noarch 0:0.11.3-2.el5 set to be updated --> Processing Dependency: python(abi) = 2.4 for package: python-nose-0.11.3-2.el5.noarch ---> Package python-paramiko.noarch 0:1.7.6-1.el5 set to be updated --> Processing Dependency: python(abi) = 2.4 for package: python-paramiko-1.7.6-1.el5.noarch ---> Package xorg-x11-drv-qxl.x86_64 0:0.0.12-2.1.el6_0.1 set to be updated --> Running transaction check ---> Package augeas-devel.i686 0:0.7.2-3.el6 set to be updated ---> Package augeas-libs.i686 0:0.7.2-3.el6 set to be updated --> Processing Dependency: libselinux.so.1 for package: augeas-libs-0.7.2-3.el6.i686 ---> Package python-nose.noarch 0:0.11.3-2.el5 set to be updated --> Processing Dependency: python(abi) = 2.4 for package: python-nose-0.11.3-2.el5.noarch ---> Package python-paramiko.noarch 0:1.7.6-1.el5 set to be updated --> Processing Dependency: python(abi) = 2.4 for package: python-paramiko-1.7.6-1.el5.noarch --> Running transaction check ---> Package libselinux.i686 0:2.0.94-2.el6 set to be updated ---> Package python-nose.noarch 0:0.11.3-2.el5 set to be updated --> Processing Dependency: python(abi) = 2.4 for package: python-nose-0.11.3-2.el5.noarch ---> Package python-paramiko.noarch 0:1.7.6-1.el5 set to be updated --> Processing Dependency: python(abi) = 2.4 for package: python-paramiko-1.7.6-1.el5.noarch --> Finished Dependency Resolution Error: Package: python-nose-0.11.3-2.el5.noarch (epel) Requires: python(abi) = 2.4 Installed: python-2.6.5-3.el6.x86_64 (@Red Hat Enterprise Linux/6.0) python(abi) = 2.6 Available: python26-2.6.5-5.el5.x86_64 (epel) python(abi) = 2.6 Error: Package: python-paramiko-1.7.6-1.el5.noarch (epel) Requires: python(abi) = 2.4 Installed: python-2.6.5-3.el6.x86_64 (@Red Hat Enterprise Linux/6.0) python(abi) = 2.6 Available: python26-2.6.5-5.el5.x86_64 (epel) python(abi) = 2.6 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest ------------------------------------------------------------------------ I had to change /etc/yum.repos.d/epel.repo to 'enabled=0' and then run 'yum clean all && yum update' to get yum running again. These are small issues though, and I'd vote for a reference in Pasi's tutorial as an option against compiling from source (though I'd leave that option in place). I would like to use this to add myoung's kernel as an option in pxdi, if that is ok with you. -- Digimer E-Mail: digimer@alteeve.com AN!Whitepapers: http://alteeve.com Node Assassin: http://nodeassassin.org [-- Attachment #1.2: Type: text/html, Size: 7486 bytes --] [-- Attachment #2: Type: text/plain, Size: 137 bytes --] _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Xen-devel] Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-30 6:04 ` Boris Derzhavets @ 2010-11-30 14:43 ` Digimer 2010-11-30 14:45 ` Re: [Xen-users] " Boris Derzhavets 0 siblings, 1 reply; 46+ messages in thread From: Digimer @ 2010-11-30 14:43 UTC (permalink / raw) To: Boris Derzhavets; +Cc: xen-devel, xen-users, Pasi Kärkkäinen On 11/30/2010 01:04 AM, Boris Derzhavets wrote: > > I would like to use this to add myoung's kernel as an option in pxdi, > if that is ok with you. > > What is pxdi ? > > Boris. A script I wrote to automate Pasi's tutorial. http://wiki.alteeve.com/index.php/Pxdi -- Digimer E-Mail: digimer@alteeve.com AN!Whitepapers: http://alteeve.com Node Assassin: http://nodeassassin.org ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-30 14:43 ` Digimer @ 2010-11-30 14:45 ` Boris Derzhavets 2010-11-30 14:46 ` [Xen-devel] " Digimer 0 siblings, 1 reply; 46+ messages in thread From: Boris Derzhavets @ 2010-11-30 14:45 UTC (permalink / raw) To: Digimer; +Cc: xen-devel, xen-users [-- Attachment #1.1: Type: text/plain, Size: 850 bytes --] Sure, I don't mind. Boris. --- On Tue, 11/30/10, Digimer <linux@alteeve.com> wrote: From: Digimer <linux@alteeve.com> Subject: Re: [Xen-devel] Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: xen-devel@lists.xensource.com, xen-users@lists.xensource.com, "Pasi Kärkkäinen" <pasik@iki.fi> Date: Tuesday, November 30, 2010, 9:43 AM On 11/30/2010 01:04 AM, Boris Derzhavets wrote: > > I would like to use this to add myoung's kernel as an option in pxdi, > if that is ok with you. > > What is pxdi ? > > Boris. A script I wrote to automate Pasi's tutorial. http://wiki.alteeve.com/index.php/Pxdi -- Digimer E-Mail: digimer@alteeve.com AN!Whitepapers: http://alteeve.com Node Assassin: http://nodeassassin.org [-- Attachment #1.2: Type: text/html, Size: 1497 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Xen-devel] Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-30 14:45 ` Re: [Xen-users] " Boris Derzhavets @ 2010-11-30 14:46 ` Digimer 0 siblings, 0 replies; 46+ messages in thread From: Digimer @ 2010-11-30 14:46 UTC (permalink / raw) To: Boris Derzhavets; +Cc: xen-devel, xen-users, Pasi Kärkkäinen On 11/30/2010 09:45 AM, Boris Derzhavets wrote: > Sure, I don't mind. > > Boris. Thanks, I will work on adding it in the next day or two. Thanks again for the .spec trick! -- Digimer E-Mail: digimer@alteeve.com AN!Whitepapers: http://alteeve.com Node Assassin: http://nodeassassin.org ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-30 3:50 ` Digimer 2010-11-30 6:04 ` Boris Derzhavets @ 2010-12-01 9:11 ` Boris Derzhavets 1 sibling, 0 replies; 46+ messages in thread From: Boris Derzhavets @ 2010-12-01 9:11 UTC (permalink / raw) To: Digimer; +Cc: xen-devel, xen-users [-- Attachment #1.1: Type: text/plain, Size: 10886 bytes --] ------------------------------------------- RPMS setup with no hackery ------------------------------------------- # rpmbuild -bb -with firmware kernel.spec ( original version) All required rpms get built . Setting up Install Process Examining kernel-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-2.6.32.26-174.xendom0.el6.x86_64 Marking kernel-2.6.32.26-174.xendom0.el6.x86_64.rpm as an update to kernel-2.6.32-71.el6.x86_64 Marking kernel-2.6.32.26-174.xendom0.el6.x86_64.rpm as an update to kernel-2.6.32-71.7.1.el6.x86_64 Examining kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64 Marking kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64.rpm to be installed Examining kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64 Marking kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64.rpm to be installed Examining kernel-devel-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-devel-2.6.32.26-174.xendom0.el6.x86_64 Marking kernel-devel-2.6.32.26-174.xendom0.el6.x86_64.rpm as an update to kernel-devel-2.6.32-71.el6.x86_64 Marking kernel-devel-2.6.32.26-174.xendom0.el6.x86_64.rpm as an update to kernel-devel-2.6.32-71.7.1.el6.x86_64 Examining kernel-firmware-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-firmware-2.6.32.26-174.xendom0.el6.x86_64 Marking kernel-firmware-2.6.32.26-174.xendom0.el6.x86_64.rpm to be installed Examining kernel-headers-2.6.32.26-174.xendom0.el6.x86_64.rpm: kernel-headers-2.6.32.26-174.xendom0.el6.x86_64 Marking kernel-headers-2.6.32.26-174.xendom0.el6.x86_64.rpm as an update to kernel-headers-2.6.32-71.7.1.el6.x86_64 Resolving Dependencies --> Running transaction check ---> Package kernel.x86_64 0:2.6.32.26-174.xendom0.el6 set to be installed ---> Package kernel-debuginfo.x86_64 0:2.6.32.26-174.xendom0.el6 set to be updated ---> Package kernel-debuginfo-common-x86_64.x86_64 0:2.6.32.26-174.xendom0.el6 set to be updated ---> Package kernel-devel.x86_64 0:2.6.32.26-174.xendom0.el6 set to be installed ---> Package kernel-firmware.x86_64 0:2.6.32.26-174.xendom0.el6 set to be updated ---> Package kernel-headers.x86_64 0:2.6.32.26-174.xendom0.el6 set to be updated --> Finished Dependency Resolution Dependencies Resolved ================================================================================================================= Package Arch Version Repository Size ================================================================================================================= Installing: kernel x86_64 2.6.32.26-174.xendom0.el6 /kernel-2.6.32.26-174.xendom0.el6.x86_64 91 M kernel-debuginfo x86_64 2.6.32.26-174.xendom0.el6 /kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64 1.1 G kernel-debuginfo-common-x86_64 x86_64 2.6.32.26-174.xendom0.el6 /kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64 151 M kernel-devel x86_64 2.6.32.26-174.xendom0.el6 /kernel-devel-2.6.32.26-174.xendom0.el6.x86_64 22 M kernel-firmware x86_64 2.6.32.26-174.xendom0.el6 /kernel-firmware-2.6.32.26-174.xendom0.el6.x86_64 2.2 M Updating: kernel-headers x86_64 2.6.32.26-174.xendom0.el6 /kernel-headers-2.6.32.26-174.xendom0.el6.x86_64 2.3 M Transaction Summary ================================================================================================================= Install 5 Package(s) Upgrade 1 Package(s) Total size: 1.4 G Is this ok [y/N]: y Downloading Packages: Running rpm_check_debug Running Transaction Test Transaction Test Succeeded Running Transaction Installing : kernel-debuginfo-common-x86_64-2.6.32.26-174.xendom0.el6.x86_64 1/7 Installing : kernel-firmware-2.6.32.26-174.xendom0.el6.x86_64 2/7 Installing : kernel-debuginfo-2.6.32.26-174.xendom0.el6.x86_64 3/7 Updating : kernel-headers-2.6.32.26-174.xendom0.el6.x86_64 4/7 Installing : kernel-devel-2.6.32.26-174.xendom0.el6.x86_64 5/7 Installing : kernel-2.6.32.26-174.xendom0.el6.x86_64 6/7 Cleanup : kernel-headers-2.6.32-71.7.1.el6.x86_64 7/7 Installed: kernel.x86_64 0:2.6.32.26-174.xendom0.el6 kernel-debuginfo.x86_64 0:2.6.32.26-174.xendom0.el6 kernel-debuginfo-common-x86_64.x86_64 0:2.6.32.26-174.xendom0.el6 kernel-devel.x86_64 0:2.6.32.26-174.xendom0.el6 kernel-firmware.x86_64 0:2.6.32.26-174.xendom0.el6 Updated: kernel-headers.x86_64 0:2.6.32.26-174.xendom0.el6 Complete! Boris. --- On Mon, 11/29/10, Digimer <linux@alteeve.com> wrote: From: Digimer <linux@alteeve.com> Subject: Re: [Xen-devel] Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: xen-devel@lists.xensource.com, xen-users@lists.xensource.com Date: Monday, November 29, 2010, 10:50 PM On 11/29/2010 02:40 PM, Boris Derzhavets wrote: > Could it be considered as update for "HOWTO" ? > > http://bderzhavets.wordpress.com/2010/11/29/rebuild-kernel-2-6-32-26-174-xendom0-fc12-src-rpm-on-rhel-server-6/ > > Boris. I ran through this tonight, and I did get it working and installed, so thank you. :) If I can make a couple suggestions? 1. Provide a downloadable patch file and and example showing how to use patch for those who might be less familiar with it. 2. After compile and install, disable the epel repo as it triggers these errors: ------------------------------------------------------------------------ [root@an-node03 x86_64]# yum update Loaded plugins: refresh-packagekit, rhnplugin epel | 3.7 kB 00:00 epel/primary_db | 3.4 MB 00:07 rhel-x86_64-server-6 | 1.8 kB 00:00 rhel-x86_64-server-6/primary | 1.6 MB 00:03 rhel-x86_64-server-6 3562/3562 rhel-x86_64-server-ha-6 | 1.8 kB 00:00 rhel-x86_64-server-ha-6/primary | 13 kB 00:00 rhel-x86_64-server-ha-6 35/35 rhel-x86_64-server-optional-6 | 1.6 kB 00:00 rhel-x86_64-server-optional-6/primary| 695 kB 00:01 rhel-x86_64-server-optional-6 2672/2672 Setting up Update Process Resolving Dependencies --> Running transaction check --> Processing Dependency: pkgconfig(augeas) >= 0.5.0 for package: netcf-devel-0.1.6-4.el6.x86_64 ---> Package augeas-devel.x86_64 0:0.7.3-1.el5 set to be updated --> Processing Dependency: augeas-libs = 0.7.2-3.el6 for package: augeas-devel-0.7.2-3.el6.i686 ---> Package augeas-libs.x86_64 0:0.7.3-1.el5 set to be updated ---> Package cvs.x86_64 0:1.11.23-11.el6_0.1 set to be updated ---> Package fontpackages-filesystem.noarch 0:1.44-1.el5.1 set to be updated ---> Package iwl6000-firmware.noarch 0:9.193.4.1-1.el5 set to be updated ---> Package libldb.x86_64 0:0.9.10-25.el5 set to be updated ---> Package libtalloc.x86_64 0:2.0.1-7.el5 set to be updated ---> Package libtdb.x86_64 0:1.2.1-4.el5 set to be updated ---> Package python-nose.noarch 0:0.11.3-2.el5 set to be updated --> Processing Dependency: python(abi) = 2.4 for package: python-nose-0.11.3-2.el5.noarch ---> Package python-paramiko.noarch 0:1.7.6-1.el5 set to be updated --> Processing Dependency: python(abi) = 2.4 for package: python-paramiko-1.7.6-1.el5.noarch ---> Package xorg-x11-drv-qxl.x86_64 0:0.0.12-2.1.el6_0.1 set to be updated --> Running transaction check ---> Package augeas-devel.i686 0:0.7.2-3.el6 set to be updated ---> Package augeas-libs.i686 0:0.7.2-3.el6 set to be updated --> Processing Dependency: libselinux.so.1 for package: augeas-libs-0.7.2-3.el6.i686 ---> Package python-nose.noarch 0:0.11.3-2.el5 set to be updated --> Processing Dependency: python(abi) = 2.4 for package: python-nose-0.11.3-2.el5.noarch ---> Package python-paramiko.noarch 0:1.7.6-1.el5 set to be updated --> Processing Dependency: python(abi) = 2.4 for package: python-paramiko-1.7.6-1.el5.noarch --> Running transaction check ---> Package libselinux.i686 0:2.0.94-2.el6 set to be updated ---> Package python-nose.noarch 0:0.11.3-2.el5 set to be updated --> Processing Dependency: python(abi) = 2.4 for package: python-nose-0.11.3-2.el5.noarch ---> Package python-paramiko.noarch 0:1.7.6-1.el5 set to be updated --> Processing Dependency: python(abi) = 2.4 for package: python-paramiko-1.7.6-1.el5.noarch --> Finished Dependency Resolution Error: Package: python-nose-0.11.3-2.el5.noarch (epel) Requires: python(abi) = 2.4 Installed: python-2.6.5-3.el6.x86_64 (@Red Hat Enterprise Linux/6.0) python(abi) = 2.6 Available: python26-2.6.5-5.el5.x86_64 (epel) python(abi) = 2.6 Error: Package: python-paramiko-1.7.6-1.el5.noarch (epel) Requires: python(abi) = 2.4 Installed: python-2.6.5-3.el6.x86_64 (@Red Hat Enterprise Linux/6.0) python(abi) = 2.6 Available: python26-2.6.5-5.el5.x86_64 (epel) python(abi) = 2.6 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest ------------------------------------------------------------------------ I had to change /etc/yum.repos.d/epel.repo to 'enabled=0' and then run 'yum clean all && yum update' to get yum running again. These are small issues though, and I'd vote for a reference in Pasi's tutorial as an option against compiling from source (though I'd leave that option in place). I would like to use this to add myoung's kernel as an option in pxdi, if that is ok with you. -- Digimer E-Mail: digimer@alteeve.com AN!Whitepapers: http://alteeve.com Node Assassin: http://nodeassassin.org _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel [-- Attachment #1.2: Type: text/html, Size: 18186 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-29 19:40 ` Boris Derzhavets 2010-11-30 3:50 ` Digimer @ 2010-11-30 18:29 ` Pasi Kärkkäinen 1 sibling, 0 replies; 46+ messages in thread From: Pasi Kärkkäinen @ 2010-11-30 18:29 UTC (permalink / raw) To: Boris Derzhavets; +Cc: xen-devel, xen-users, Digimer On Mon, Nov 29, 2010 at 11:40:35AM -0800, Boris Derzhavets wrote: > Could it be considered as update for "HOWTO" ? > > http://bderzhavets.wordpress.com/2010/11/29/rebuild-kernel-2-6-32-26-174-xendom0-fc12-src-rpm-on-rhel-server-6/ > I just added the link to your tutorial! Thanks. -- Pasi > Boris. > > --- On Thu, 11/18/10, Pasi Kärkkäinen <pasik@iki.fi> wrote: > > From: Pasi Kärkkäinen <pasik@iki.fi> > Subject: [Xen-devel] Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 > (RHEL6) > To: "Digimer" <linux@alteeve.com> > Cc: xen-devel@lists.xensource.com, xen-users@lists.xensource.com > Date: Thursday, November 18, 2010, 3:37 PM > > On Thu, Nov 18, 2010 at 03:14:32PM -0500, Digimer wrote: > > On 11/18/2010 03:00 PM, Pasi Kärkkäinen wrote: > >> Hello, > >> > >> If you're interested in running Xen 4.0 hypervisor/dom0 on RHEL6, > >> take a look at here: [1]http://wiki.xen.org/xenwiki/RHEL6Xen4Tutorial > >> > >> It explains steps needed to rebuild Xen 4.0.1 src.rpm from Fedora on RHEL6, > >> and how to fetch dom0 capable 2.6.32.x kernel from upstream git repository. > >> > >> It also shows how to get libvirt/virt-manager working with Xen on RHEL6. > >> > >> Hopefully it helps :) > >> > >> -- Pasi > > > > I was in the middle of trying to resolve the dependencies yesterday and > > today. I'll give this a run through and provide feedback when done. > > Thanks kindly! > > > > All that should be fine.. if not, let me know, and I'll fix it! > > -- Pasi > > _______________________________________________ > Xen-devel mailing list > [2]Xen-devel@lists.xensource.com > [3]http://lists.xensource.com/xen-devel > > References > > Visible links > 1. http://wiki.xen.org/xenwiki/RHEL6Xen4Tutorial > 2. file:///mc/compose?to=Xen-devel@lists.xensource.com > 3. http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Xen-devel] Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-18 20:14 ` Digimer 2010-11-18 20:37 ` [Xen-users] " Pasi Kärkkäinen @ 2010-11-23 11:55 ` Boris Derzhavets 2010-11-23 12:23 ` Re: [Xen-users] " Pasi Kärkkäinen 1 sibling, 1 reply; 46+ messages in thread From: Boris Derzhavets @ 2010-11-23 11:55 UTC (permalink / raw) To: Pasi Kärkkäinen, Digimer; +Cc: xen-devel, xen-users [-- Attachment #1.1: Type: text/plain, Size: 459 bytes --] In meantime yum install texi2html pciutils-devel fails. What causes failure [root@el6 x86_64]# cd /root/src [root@el6 src]# wget ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/updates/13/SRPMS/qemu-0.12.5-1.fc13.src.rpm [root@el6 src]# rpm -i qemu-0.12.5-1.fc13.src.rpm [root@el6 src]# cd /root/rpmbuild/SPECS [root@el6 SPECS]# rpmbuild -bb qemu.spec Attempt to drop dependences doesn't help. Boris. [-- Attachment #1.2: Type: text/html, Size: 770 bytes --] [-- Attachment #2: Type: text/plain, Size: 137 bytes --] _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-23 11:55 ` [Xen-devel] " Boris Derzhavets @ 2010-11-23 12:23 ` Pasi Kärkkäinen 2010-11-23 12:31 ` Boris Derzhavets 0 siblings, 1 reply; 46+ messages in thread From: Pasi Kärkkäinen @ 2010-11-23 12:23 UTC (permalink / raw) To: Boris Derzhavets; +Cc: xen-devel, xen-users, Digimer On Tue, Nov 23, 2010 at 03:55:28AM -0800, Boris Derzhavets wrote: > In meantime > yum install texi2html pciutils-devel > fails. > What causes failure > You need to enable the Optional channel from RHN. It' mentioned in the tutorial.. -- Pasi > [root@el6 x86_64]# cd /root/src > [root@el6 src]# wget > ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/updates/13/SRPMS/qemu-0.12.5-1.fc13.src.rpm > [root@el6 src]# rpm -i qemu-0.12.5-1.fc13.src.rpm > [root@el6 src]# cd /root/rpmbuild/SPECS > [root@el6 SPECS]# rpmbuild -bb qemu.spec > > Attempt to drop dependences doesn't help. > > Boris. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-23 12:23 ` Re: [Xen-users] " Pasi Kärkkäinen @ 2010-11-23 12:31 ` Boris Derzhavets 0 siblings, 0 replies; 46+ messages in thread From: Boris Derzhavets @ 2010-11-23 12:31 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: xen-devel, xen-users, Digimer [-- Attachment #1.1: Type: text/plain, Size: 1168 bytes --] It's just evaluation subscription and i was not given this option. Moreover i cannot reconnect to RHN Boris. --- On Tue, 11/23/10, Pasi Kärkkäinen <pasik@iki.fi> wrote: From: Pasi Kärkkäinen <pasik@iki.fi> Subject: Re: [Xen-devel] Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: "Digimer" <linux@alteeve.com>, xen-devel@lists.xensource.com, xen-users@lists.xensource.com Date: Tuesday, November 23, 2010, 7:23 AM On Tue, Nov 23, 2010 at 03:55:28AM -0800, Boris Derzhavets wrote: > In meantime > yum install texi2html pciutils-devel > fails. > What causes failure > You need to enable the Optional channel from RHN. It' mentioned in the tutorial.. -- Pasi > [root@el6 x86_64]# cd /root/src > [root@el6 src]# wget > ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/updates/13/SRPMS/qemu-0.12.5-1.fc13.src.rpm > [root@el6 src]# rpm -i qemu-0.12.5-1.fc13.src.rpm > [root@el6 src]# cd /root/rpmbuild/SPECS > [root@el6 SPECS]# rpmbuild -bb qemu.spec > > Attempt to drop dependences doesn't help. > > Boris. [-- Attachment #1.2: Type: text/html, Size: 1716 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-18 20:00 [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) Pasi Kärkkäinen 2010-11-18 20:14 ` Digimer @ 2010-11-18 20:23 ` Rudi Ahlers 2010-11-18 20:39 ` [Xen-users] " Pasi Kärkkäinen 2010-11-18 20:44 ` Pasi Kärkkäinen 2010-11-18 20:57 ` M A Young 2010-11-19 4:30 ` Digimer 3 siblings, 2 replies; 46+ messages in thread From: Rudi Ahlers @ 2010-11-18 20:23 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: xen-devel, xen-users On Thu, Nov 18, 2010 at 10:00 PM, Pasi Kärkkäinen <pasik@iki.fi> wrote: > Hello, > > If you're interested in running Xen 4.0 hypervisor/dom0 on RHEL6, > take a look at here: http://wiki.xen.org/xenwiki/RHEL6Xen4Tutorial > > It explains steps needed to rebuild Xen 4.0.1 src.rpm from Fedora on RHEL6, > and how to fetch dom0 capable 2.6.32.x kernel from upstream git repository. > > It also shows how to get libvirt/virt-manager working with Xen on RHEL6. > > Hopefully it helps :) > > -- Pasi > > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users > Thanx for sharing this, how's the performance, since it's a rebuild from FC? -- Kind Regards Rudi Ahlers SoftDux Website: http://www.SoftDux.com Technical Blog: http://Blog.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532 ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-18 20:23 ` Rudi Ahlers @ 2010-11-18 20:39 ` Pasi Kärkkäinen 2010-11-19 17:08 ` Digimer 2010-11-18 20:44 ` Pasi Kärkkäinen 1 sibling, 1 reply; 46+ messages in thread From: Pasi Kärkkäinen @ 2010-11-18 20:39 UTC (permalink / raw) To: Rudi Ahlers; +Cc: xen-devel, xen-users On Thu, Nov 18, 2010 at 10:23:07PM +0200, Rudi Ahlers wrote: > On Thu, Nov 18, 2010 at 10:00 PM, Pasi Kärkkäinen <pasik@iki.fi> wrote: > > Hello, > > > > If you're interested in running Xen 4.0 hypervisor/dom0 on RHEL6, > > take a look at here: http://wiki.xen.org/xenwiki/RHEL6Xen4Tutorial > > > > It explains steps needed to rebuild Xen 4.0.1 src.rpm from Fedora on RHEL6, > > and how to fetch dom0 capable 2.6.32.x kernel from upstream git repository. > > > > It also shows how to get libvirt/virt-manager working with Xen on RHEL6. > > > > Hopefully it helps :) > > > > -- Pasi > > > > > > _______________________________________________ > > Xen-users mailing list > > Xen-users@lists.xensource.com > > http://lists.xensource.com/xen-users > > > > > Thanx for sharing this, how's the performance, since it's a rebuild from FC? > Fedora 14 xen-4.0.1-6 is pretty much the upstream xen.org 4.0.1 version, just with a couple more bugfixes from xen-4.0-testing.hg (from xen-4.0.2-rc*), so it should do well. Note the kernel reference .config has debugging stuff enabled, so that will slow down dom0. -- Pasi ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-18 20:39 ` [Xen-users] " Pasi Kärkkäinen @ 2010-11-19 17:08 ` Digimer 2010-11-19 17:11 ` [Xen-users] " Pasi Kärkkäinen 0 siblings, 1 reply; 46+ messages in thread From: Digimer @ 2010-11-19 17:08 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: Rudi Ahlers, xen-devel, xen-users On 11/18/2010 03:39 PM, Pasi Kärkkäinen wrote: > Note the kernel reference .config has debugging stuff enabled, > so that will slow down dom0. > > -- Pasi With regard to this; I've been hoping to create a set of updated KVM vs. Xen benchmarks as I've seen this asked for of late and existing data is >3 years old. I would like to get the kernel setup relatively similarly to how it will be setup if/when an RPM is provided for RHEL 6. These are the DEBUG entries I found in .config from your tutorial. Which are reasonable to set to n/m or just comment out? Did I miss anything else I should change? Again, I'm not looking to optimize, just to get closer to what the final generally available kernel will have. CONFIG_XEN_DEBUG_FS=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_SLUB_DEBUG=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_X86_DEBUGCTLMSR=y CONFIG_PM_DEBUG=y CONFIG_CPU_FREQ_DEBUG=y CONFIG_CFG80211_DEBUGFS=y CONFIG_MAC80211_DEBUGFS=y CONFIG_DEBUG_DEVRES=y CONFIG_DM_DEBUG=y CONFIG_FIREWIRE_OHCI_DEBUG=y CONFIG_MLX4_DEBUG=y CONFIG_LIBERTAS_DEBUG=y CONFIG_ATH5K_DEBUG=y CONFIG_IWLWIFI_DEBUG=y CONFIG_IWLWIFI_DEBUGFS=y CONFIG_RT2X00_LIB_DEBUGFS=y CONFIG_SND_DEBUG=y CONFIG_SND_PCM_XRUN_DEBUG=y CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_IPOIB_DEBUG=y CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y CONFIG_JBD2_DEBUG=y CONFIG_DLM_DEBUG=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_OBJECTS=y CONFIG_DEBUG_OBJECTS_FREE=y CONFIG_DEBUG_OBJECTS_TIMERS=y CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 CONFIG_SLUB_DEBUG_ON=y CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_PI_LIST=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_VM=y CONFIG_DEBUG_WRITECOUNT=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_DEBUG_LIST=y CONFIG_DEBUG_SG=y CONFIG_DEBUG_NOTIFIERS=y CONFIG_FAULT_INJECTION_DEBUG_FS=y CONFIG_DYNAMIC_DEBUG=y CONFIG_DMA_API_DEBUG=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUG_RODATA=y CONFIG_DEBUG_RODATA_TEST=y CONFIG_DEBUG_NX_TEST=m CONFIG_DEBUG_BOOT_PARAMS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y I realize a bunch of these are for hardware that has little or nothing to do with Xen. Thanks for any feedback. -- Digimer E-Mail: digimer@alteeve.com AN!Whitepapers: http://alteeve.com Node Assassin: http://nodeassassin.org ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-19 17:08 ` Digimer @ 2010-11-19 17:11 ` Pasi Kärkkäinen 2010-11-19 18:04 ` Digimer 0 siblings, 1 reply; 46+ messages in thread From: Pasi Kärkkäinen @ 2010-11-19 17:11 UTC (permalink / raw) To: Digimer; +Cc: Rudi Ahlers, xen-devel, xen-users On Fri, Nov 19, 2010 at 12:08:30PM -0500, Digimer wrote: > On 11/18/2010 03:39 PM, Pasi Kärkkäinen wrote: >> Note the kernel reference .config has debugging stuff enabled, >> so that will slow down dom0. >> >> -- Pasi > > With regard to this; > > I've been hoping to create a set of updated KVM vs. Xen benchmarks as > I've seen this asked for of late and existing data is >3 years old. > > I would like to get the kernel setup relatively similarly to how it will > be setup if/when an RPM is provided for RHEL 6. > > These are the DEBUG entries I found in .config from your tutorial. Which > are reasonable to set to n/m or just comment out? Did I miss anything > else I should change? Again, I'm not looking to optimize, just to get > closer to what the final generally available kernel will have. > Yeah, you should definitely disable the various DEBUG options for performance benchmarking. -- Pasi > CONFIG_XEN_DEBUG_FS=y > CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y > CONFIG_SLUB_DEBUG=y > CONFIG_HAVE_DMA_API_DEBUG=y > CONFIG_X86_DEBUGCTLMSR=y > CONFIG_PM_DEBUG=y > CONFIG_CPU_FREQ_DEBUG=y > CONFIG_CFG80211_DEBUGFS=y > CONFIG_MAC80211_DEBUGFS=y > CONFIG_DEBUG_DEVRES=y > CONFIG_DM_DEBUG=y > CONFIG_FIREWIRE_OHCI_DEBUG=y > CONFIG_MLX4_DEBUG=y > CONFIG_LIBERTAS_DEBUG=y > CONFIG_ATH5K_DEBUG=y > CONFIG_IWLWIFI_DEBUG=y > CONFIG_IWLWIFI_DEBUGFS=y > CONFIG_RT2X00_LIB_DEBUGFS=y > CONFIG_SND_DEBUG=y > CONFIG_SND_PCM_XRUN_DEBUG=y > CONFIG_INFINIBAND_MTHCA_DEBUG=y > CONFIG_INFINIBAND_IPOIB_DEBUG=y > CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y > CONFIG_JBD2_DEBUG=y > CONFIG_DLM_DEBUG=y > CONFIG_DEBUG_FS=y > CONFIG_DEBUG_KERNEL=y > CONFIG_DEBUG_SHIRQ=y > CONFIG_SCHED_DEBUG=y > CONFIG_DEBUG_OBJECTS=y > CONFIG_DEBUG_OBJECTS_FREE=y > CONFIG_DEBUG_OBJECTS_TIMERS=y > CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 > CONFIG_SLUB_DEBUG_ON=y > CONFIG_DEBUG_RT_MUTEXES=y > CONFIG_DEBUG_PI_LIST=y > CONFIG_DEBUG_SPINLOCK=y > CONFIG_DEBUG_MUTEXES=y > CONFIG_DEBUG_LOCK_ALLOC=y > CONFIG_DEBUG_SPINLOCK_SLEEP=y > CONFIG_DEBUG_BUGVERBOSE=y > CONFIG_DEBUG_INFO=y > CONFIG_DEBUG_VM=y > CONFIG_DEBUG_WRITECOUNT=y > CONFIG_DEBUG_MEMORY_INIT=y > CONFIG_DEBUG_LIST=y > CONFIG_DEBUG_SG=y > CONFIG_DEBUG_NOTIFIERS=y > CONFIG_FAULT_INJECTION_DEBUG_FS=y > CONFIG_DYNAMIC_DEBUG=y > CONFIG_DMA_API_DEBUG=y > CONFIG_DEBUG_STACKOVERFLOW=y > CONFIG_DEBUG_STACK_USAGE=y > CONFIG_DEBUG_RODATA=y > CONFIG_DEBUG_RODATA_TEST=y > CONFIG_DEBUG_NX_TEST=m > CONFIG_DEBUG_BOOT_PARAMS=y > CONFIG_KEYS_DEBUG_PROC_KEYS=y > > I realize a bunch of these are for hardware that has little or nothing > to do with Xen. > > Thanks for any feedback. > > -- > Digimer > E-Mail: digimer@alteeve.com > AN!Whitepapers: http://alteeve.com > Node Assassin: http://nodeassassin.org ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-19 17:11 ` [Xen-users] " Pasi Kärkkäinen @ 2010-11-19 18:04 ` Digimer 2010-11-19 18:28 ` Pasi Kärkkäinen 0 siblings, 1 reply; 46+ messages in thread From: Digimer @ 2010-11-19 18:04 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: Rudi Ahlers, xen-devel, xen-users On 11/19/2010 12:11 PM, Pasi Kärkkäinen wrote: > On Fri, Nov 19, 2010 at 12:08:30PM -0500, Digimer wrote: >> On 11/18/2010 03:39 PM, Pasi Kärkkäinen wrote: >>> Note the kernel reference .config has debugging stuff enabled, >>> so that will slow down dom0. >>> >>> -- Pasi >> >> With regard to this; >> >> I've been hoping to create a set of updated KVM vs. Xen benchmarks as >> I've seen this asked for of late and existing data is>3 years old. >> >> I would like to get the kernel setup relatively similarly to how it will >> be setup if/when an RPM is provided for RHEL 6. >> >> These are the DEBUG entries I found in .config from your tutorial. Which >> are reasonable to set to n/m or just comment out? Did I miss anything >> else I should change? Again, I'm not looking to optimize, just to get >> closer to what the final generally available kernel will have. >> > > Yeah, you should definitely disable the various DEBUG options > for performance benchmarking. > > -- Pasi Thanks, I'm compiling now. If it works, I'll post my patch for review/critique. :P -- Digimer E-Mail: digimer@alteeve.com AN!Whitepapers: http://alteeve.com Node Assassin: http://nodeassassin.org ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-19 18:04 ` Digimer @ 2010-11-19 18:28 ` Pasi Kärkkäinen 2010-11-19 19:07 ` Digimer 0 siblings, 1 reply; 46+ messages in thread From: Pasi Kärkkäinen @ 2010-11-19 18:28 UTC (permalink / raw) To: Digimer; +Cc: Rudi Ahlers, xen-devel, xen-users On Fri, Nov 19, 2010 at 01:04:55PM -0500, Digimer wrote: > On 11/19/2010 12:11 PM, Pasi Kärkkäinen wrote: >> On Fri, Nov 19, 2010 at 12:08:30PM -0500, Digimer wrote: >>> On 11/18/2010 03:39 PM, Pasi Kärkkäinen wrote: >>>> Note the kernel reference .config has debugging stuff enabled, >>>> so that will slow down dom0. >>>> >>>> -- Pasi >>> >>> With regard to this; >>> >>> I've been hoping to create a set of updated KVM vs. Xen benchmarks as >>> I've seen this asked for of late and existing data is>3 years old. >>> >>> I would like to get the kernel setup relatively similarly to how it will >>> be setup if/when an RPM is provided for RHEL 6. >>> >>> These are the DEBUG entries I found in .config from your tutorial. Which >>> are reasonable to set to n/m or just comment out? Did I miss anything >>> else I should change? Again, I'm not looking to optimize, just to get >>> closer to what the final generally available kernel will have. >>> >> >> Yeah, you should definitely disable the various DEBUG options >> for performance benchmarking. >> >> -- Pasi > > Thanks, I'm compiling now. If it works, I'll post my patch for > review/critique. :P > Yep. How/what are you thinking of benchmarking? -- Pasi ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-19 18:28 ` Pasi Kärkkäinen @ 2010-11-19 19:07 ` Digimer 2010-11-19 19:15 ` [Xen-users] " Pasi Kärkkäinen 2010-11-22 15:08 ` [Xen-devel] " Konrad Rzeszutek Wilk 0 siblings, 2 replies; 46+ messages in thread From: Digimer @ 2010-11-19 19:07 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: Rudi Ahlers, xen-devel, xen-users On 11/19/2010 01:28 PM, Pasi Kärkkäinen wrote: > Yep. > > How/what are you thinking of benchmarking? > > -- Pasi My current plan is; - Repeat all tests 3 times and average the results. - All tests run inside of a VM, one set with only one VM, again simultaneously on two VMs and then a final set with three VMs simultaneously. - Actual tests: - bonnie++ - kernel compile timing - network transfer of a large file from a common source - migration timing on VM (live and frozen) I'd love to hear suggestions for other tests as well. I'll be posting my results here: http://wiki.alteeve.com/index.php/Xen_vs._KVM_Benchmark_-_Nov._2010 It's pretty empty though just now though. -- Digimer E-Mail: digimer@alteeve.com AN!Whitepapers: http://alteeve.com Node Assassin: http://nodeassassin.org ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-19 19:07 ` Digimer @ 2010-11-19 19:15 ` Pasi Kärkkäinen 2010-11-22 15:08 ` [Xen-devel] " Konrad Rzeszutek Wilk 1 sibling, 0 replies; 46+ messages in thread From: Pasi Kärkkäinen @ 2010-11-19 19:15 UTC (permalink / raw) To: Digimer; +Cc: Rudi Ahlers, xen-devel, xen-users On Fri, Nov 19, 2010 at 02:07:54PM -0500, Digimer wrote: > On 11/19/2010 01:28 PM, Pasi Kärkkäinen wrote: >> Yep. >> >> How/what are you thinking of benchmarking? >> >> -- Pasi > > My current plan is; > - Repeat all tests 3 times and average the results. > - All tests run inside of a VM, one set with only one VM, again > simultaneously on two VMs and then a final set with three VMs > simultaneously. > It would be nice if you benchmarked both Xen PV and HVM VMs: - Xen PV 32bit VM - Xen PV 64bit VM - Xen HVM 32bit VM - Xen HVM 64bit VM - Xen HVM 32bit VM (with PV-on-HVM drivers) - Xen HVM 64bit VM (with PV-on-HVM drivers) -- Pasi > - Actual tests: > - bonnie++ > - kernel compile timing > - network transfer of a large file from a common source > - migration timing on VM (live and frozen) > > I'd love to hear suggestions for other tests as well. I'll be posting my > results here: > > http://wiki.alteeve.com/index.php/Xen_vs._KVM_Benchmark_-_Nov._2010 > > It's pretty empty though just now though. > > -- > Digimer > E-Mail: digimer@alteeve.com > AN!Whitepapers: http://alteeve.com > Node Assassin: http://nodeassassin.org ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Xen-devel] Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-19 19:07 ` Digimer 2010-11-19 19:15 ` [Xen-users] " Pasi Kärkkäinen @ 2010-11-22 15:08 ` Konrad Rzeszutek Wilk 2010-11-22 15:26 ` Digimer 2010-11-22 15:59 ` Re: [Xen-users] " Konrad Rzeszutek Wilk 1 sibling, 2 replies; 46+ messages in thread From: Konrad Rzeszutek Wilk @ 2010-11-22 15:08 UTC (permalink / raw) To: Digimer; +Cc: Rudi Ahlers, xen-devel, xen-users, Pasi Kärkkäinen On Fri, Nov 19, 2010 at 02:07:54PM -0500, Digimer wrote: > On 11/19/2010 01:28 PM, Pasi Kärkkäinen wrote: > >Yep. > > > >How/what are you thinking of benchmarking? > > > >-- Pasi > > My current plan is; > - Repeat all tests 3 times and average the results. > - All tests run inside of a VM, one set with only one VM, again > simultaneously on two VMs and then a final set with three VMs > simultaneously. > - Actual tests: > - bonnie++ also do fio and use the iometer example. > - kernel compile timing > - network transfer of a large file from a common source > - migration timing on VM (live and frozen) > > I'd love to hear suggestions for other tests as well. I'll be This would be 2.6.32 kernel on both sides of equation? > posting my results here: > > http://wiki.alteeve.com/index.php/Xen_vs._KVM_Benchmark_-_Nov._2010 > > It's pretty empty though just now though. > > -- > Digimer > E-Mail: digimer@alteeve.com > AN!Whitepapers: http://alteeve.com > Node Assassin: http://nodeassassin.org > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Xen-devel] Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-22 15:08 ` [Xen-devel] " Konrad Rzeszutek Wilk @ 2010-11-22 15:26 ` Digimer 2010-11-22 15:59 ` Re: [Xen-users] " Konrad Rzeszutek Wilk 1 sibling, 0 replies; 46+ messages in thread From: Digimer @ 2010-11-22 15:26 UTC (permalink / raw) To: Konrad Rzeszutek Wilk Cc: Rudi Ahlers, xen-devel, xen-users, Pasi Kärkkäinen On 11/22/2010 10:08 AM, Konrad Rzeszutek Wilk wrote: >> My current plan is; >> - Repeat all tests 3 times and average the results. >> - All tests run inside of a VM, one set with only one VM, again >> simultaneously on two VMs and then a final set with three VMs >> simultaneously. >> - Actual tests: >> - bonnie++ > > also do fio and use the iometer example. I'll look into adding it to the tests. >> - kernel compile timing >> - network transfer of a large file from a common source >> - migration timing on VM (live and frozen) >> >> I'd love to hear suggestions for other tests as well. I'll be > > This would be 2.6.32 kernel on both sides of equation? Yup. -- Digimer E-Mail: digimer@alteeve.com AN!Whitepapers: http://alteeve.com Node Assassin: http://nodeassassin.org ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-22 15:08 ` [Xen-devel] " Konrad Rzeszutek Wilk 2010-11-22 15:26 ` Digimer @ 2010-11-22 15:59 ` Konrad Rzeszutek Wilk 1 sibling, 0 replies; 46+ messages in thread From: Konrad Rzeszutek Wilk @ 2010-11-22 15:59 UTC (permalink / raw) To: Digimer; +Cc: Rudi Ahlers, xen-devel, xen-users On Mon, Nov 22, 2010 at 10:08:27AM -0500, Konrad Rzeszutek Wilk wrote: > On Fri, Nov 19, 2010 at 02:07:54PM -0500, Digimer wrote: > > On 11/19/2010 01:28 PM, Pasi Kärkkäinen wrote: > > >Yep. > > > > > >How/what are you thinking of benchmarking? > > > > > >-- Pasi > > > > My current plan is; > > - Repeat all tests 3 times and average the results. > > - All tests run inside of a VM, one set with only one VM, again > > simultaneously on two VMs and then a final set with three VMs > > simultaneously. Try more too. As in more VCPUs than your machine has. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-18 20:23 ` Rudi Ahlers 2010-11-18 20:39 ` [Xen-users] " Pasi Kärkkäinen @ 2010-11-18 20:44 ` Pasi Kärkkäinen 1 sibling, 0 replies; 46+ messages in thread From: Pasi Kärkkäinen @ 2010-11-18 20:44 UTC (permalink / raw) To: Rudi Ahlers; +Cc: xen-devel, xen-users On Thu, Nov 18, 2010 at 10:23:07PM +0200, Rudi Ahlers wrote: > On Thu, Nov 18, 2010 at 10:00 PM, Pasi Kärkkäinen <pasik@iki.fi> wrote: > > Hello, > > > > If you're interested in running Xen 4.0 hypervisor/dom0 on RHEL6, > > take a look at here: http://wiki.xen.org/xenwiki/RHEL6Xen4Tutorial > > > > It explains steps needed to rebuild Xen 4.0.1 src.rpm from Fedora on RHEL6, > > and how to fetch dom0 capable 2.6.32.x kernel from upstream git repository. > > > > It also shows how to get libvirt/virt-manager working with Xen on RHEL6. > > > > Hopefully it helps :) > > > > -- Pasi > > > > > > _______________________________________________ > > Xen-users mailing list > > Xen-users@lists.xensource.com > > http://lists.xensource.com/xen-users > > > > > Thanx for sharing this, how's the performance, since it's a rebuild from FC? > And well.. RHEL6 is basicly combination of Fedora 12 and Fedora 13 :) -- Pasi ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-18 20:00 [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) Pasi Kärkkäinen 2010-11-18 20:14 ` Digimer 2010-11-18 20:23 ` Rudi Ahlers @ 2010-11-18 20:57 ` M A Young 2010-11-18 21:02 ` Pasi Kärkkäinen 2010-11-19 4:30 ` Digimer 3 siblings, 1 reply; 46+ messages in thread From: M A Young @ 2010-11-18 20:57 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: xen-devel [-- Attachment #1: Type: TEXT/PLAIN, Size: 881 bytes --] On Thu, 18 Nov 2010, Pasi Kärkkäinen wrote: > Hello, > > If you're interested in running Xen 4.0 hypervisor/dom0 on RHEL6, > take a look at here: http://wiki.xen.org/xenwiki/RHEL6Xen4Tutorial > > It explains steps needed to rebuild Xen 4.0.1 src.rpm from Fedora on RHEL6, Interesting. I did look during the betas where I could build xen on RHEL6, but there weren't enough dependent packages available at the time. I have done a quick check now, and it looks like dev86 and iasl are missing on i686 (which is what I was testing it on during the betas) so you probably can't build your package in that case. x86_64 looks like it might work though. I was looking at this from the point of view of whether it would be feasible to get xen into EPEL, but as it didn't seem to work I didn't seem to work, I didn't put too much thought into it. Michael Young [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-18 20:57 ` M A Young @ 2010-11-18 21:02 ` Pasi Kärkkäinen 0 siblings, 0 replies; 46+ messages in thread From: Pasi Kärkkäinen @ 2010-11-18 21:02 UTC (permalink / raw) To: M A Young; +Cc: xen-devel On Thu, Nov 18, 2010 at 08:57:23PM +0000, M A Young wrote: > On Thu, 18 Nov 2010, Pasi Kärkkäinen wrote: > >> Hello, >> >> If you're interested in running Xen 4.0 hypervisor/dom0 on RHEL6, >> take a look at here: http://wiki.xen.org/xenwiki/RHEL6Xen4Tutorial >> >> It explains steps needed to rebuild Xen 4.0.1 src.rpm from Fedora on RHEL6, > > Interesting. I did look during the betas where I could build xen on > RHEL6, but there weren't enough dependent packages available at the time. > I have done a quick check now, and it looks like dev86 and iasl are > missing on i686 (which is what I was testing it on during the betas) so > you probably can't build your package in that case. x86_64 looks like it > might work though. > I was looking at this from the point of view of whether it would be > feasible to get xen into EPEL, but as it didn't seem to work I didn't > seem to work, I didn't put too much thought into it. > Ok. I haven't tried on 32bit (yet). I did try using beta2, on x86_64, and that worked aswell. The important part is to enable the 'Optional' channel in RHN, otherwise half of the required packages are not available.. -- Pasi ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-18 20:00 [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) Pasi Kärkkäinen ` (2 preceding siblings ...) 2010-11-18 20:57 ` M A Young @ 2010-11-19 4:30 ` Digimer 2010-11-19 6:57 ` Pasi Kärkkäinen 2010-11-23 12:24 ` Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) xen fails to build Boris Derzhavets 3 siblings, 2 replies; 46+ messages in thread From: Digimer @ 2010-11-19 4:30 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: xen-devel, xen-users On 11/18/2010 03:00 PM, Pasi Kärkkäinen wrote: > Hello, > > If you're interested in running Xen 4.0 hypervisor/dom0 on RHEL6, > take a look at here: http://wiki.xen.org/xenwiki/RHEL6Xen4Tutorial > > It explains steps needed to rebuild Xen 4.0.1 src.rpm from Fedora on RHEL6, > and how to fetch dom0 capable 2.6.32.x kernel from upstream git repository. > > It also shows how to get libvirt/virt-manager working with Xen on RHEL6. > > Hopefully it helps :) > > -- Pasi Hi Pasi, I ran into a problem at the libvirt stage. After applying your patch and while building the spec I got the error below. Might you have some advice? I did get Xen 4.0.1 installed and dom0 running, so I am already further than I was before you released your tutorial. I had been stuck on the qemu-nbd step. :) Digimer Making check in xencapsdata make[1]: Entering directory `/root/rpmbuild/BUILD/libvirt-0.8.1/tests/xencapsdata' make[1]: Nothing to be done for `check'. make[1]: Leaving directory `/root/rpmbuild/BUILD/libvirt-0.8.1/tests/xencapsdata' make[1]: Entering directory `/root/rpmbuild/BUILD/libvirt-0.8.1/tests' make check-TESTS make[2]: Entering directory `/root/rpmbuild/BUILD/libvirt-0.8.1/tests' TEST: virshtest ................ 16 OK PASS: virshtest PASS: nodeinfotest TEST: statstest ........................................ 40 ................................... 75 OK PASS: statstest TEST: qparamtest ................................ 32 OK PASS: qparamtest TEST: capabilityschematest ............ 12 OK PASS: capabilityschematest TEST: interfaceschematest .................. 18 OK PASS: interfaceschematest TEST: networkschematest ........... 11 OK PASS: networkschematest TEST: storagepoolschematest ...................... 22 OK PASS: storagepoolschematest TEST: storagevolschematest ............ 12 OK PASS: storagevolschematest TEST: domainschematest ........................................ 40 ........................................ 80 ........................................ 120 ........................................ 160 ........................................ 200 ........ 208 OK PASS: domainschematest TEST: nodedevschematest .............. 14 OK PASS: nodedevschematest TEST: nwfilterschematest .............................. 30 OK PASS: nwfilterschematest TEST: test_conf.sh .. 2 OK PASS: test_conf.sh PASS: cpuset PASS: daemon-conf PASS: define-dev-segfault PASS: int-overflow PASS: libvirtd-fail PASS: libvirtd-pool PASS: read-bufsiz PASS: read-non-seekable PASS: start PASS: undefine PASS: vcpupin TEST: virsh-all ........................................ 40 ........................................ 80 ........................................ 120 .................. 138 OK PASS: virsh-all PASS: virsh-schedinfo PASS: virsh-synopsis TEST: xml2sexprtest ........................................ 40 ... 43 OK PASS: xml2sexprtest TEST: sexpr2xmltest ........................................ 40 .. 42 OK PASS: sexpr2xmltest TEST: xmconfigtest ........................................ 40 ................ 56 OK PASS: xmconfigtest TEST: xencapstest !!!!!!!!!! 10 FAIL FAIL: xencapstest TEST: qemuxml2argvtest ........................................ 40 ........................................ 80 ............ 92 OK PASS: qemuxml2argvtest TEST: qemuxml2xmltest ........................................ 40 ............ 52 OK PASS: qemuxml2xmltest TEST: qemuargv2xmltest ........................................ 40 ................ 56 OK PASS: qemuargv2xmltest TEST: qemuhelptest ......... 9 OK PASS: qemuhelptest TEST: nwfilterxml2xmltest .............................. 30 OK PASS: nwfilterxml2xmltest TEST: esxutilstest .... 4 OK PASS: esxutilstest TEST: vmx2xmltest ....................................... 39 OK PASS: vmx2xmltest TEST: xml2vmxtest .................................. 34 OK PASS: xml2vmxtest PASS: seclabeltest TEST: eventtest ........... 11 OK PASS: eventtest TEST: networkxml2xmltest ..... 5 OK PASS: networkxml2xmltest TEST: storagevolxml2xmltest ...... 6 OK PASS: storagevolxml2xmltest TEST: storagepoolxml2xmltest ........... 11 OK PASS: storagepoolxml2xmltest TEST: nodedevxml2xmltest ............. 13 OK PASS: nodedevxml2xmltest TEST: interfacexml2xmltest ................... 19 OK PASS: interfacexml2xmltest ==================== 1 of 46 tests failed ==================== make[2]: *** [check-TESTS] Error 1 make[2]: Leaving directory `/root/rpmbuild/BUILD/libvirt-0.8.1/tests' make[1]: *** [check-am] Error 2 make[1]: Leaving directory `/root/rpmbuild/BUILD/libvirt-0.8.1/tests' make: *** [check-recursive] Error 1 error: Bad exit status from /var/tmp/rpm-tmp.Tjv2Ff (%check) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.Tjv2Ff (%check) -- Digimer E-Mail: digimer@alteeve.com AN!Whitepapers: http://alteeve.com Node Assassin: http://nodeassassin.org ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-19 4:30 ` Digimer @ 2010-11-19 6:57 ` Pasi Kärkkäinen 2010-11-19 15:38 ` Digimer ` (2 more replies) 2010-11-23 12:24 ` Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) xen fails to build Boris Derzhavets 1 sibling, 3 replies; 46+ messages in thread From: Pasi Kärkkäinen @ 2010-11-19 6:57 UTC (permalink / raw) To: Digimer; +Cc: xen-devel, xen-users On Thu, Nov 18, 2010 at 11:30:11PM -0500, Digimer wrote: > On 11/18/2010 03:00 PM, Pasi Kärkkäinen wrote: >> Hello, >> >> If you're interested in running Xen 4.0 hypervisor/dom0 on RHEL6, >> take a look at here: http://wiki.xen.org/xenwiki/RHEL6Xen4Tutorial >> >> It explains steps needed to rebuild Xen 4.0.1 src.rpm from Fedora on RHEL6, >> and how to fetch dom0 capable 2.6.32.x kernel from upstream git repository. >> >> It also shows how to get libvirt/virt-manager working with Xen on RHEL6. >> >> Hopefully it helps :) >> >> -- Pasi > > Hi Pasi, > > I ran into a problem at the libvirt stage. After applying your patch > and while building the spec I got the error below. Might you have some > advice? > It seems you didn't read well enough ;) "Before rebuilding libvirt you need to boot into non-Xen environment! This is because some of the automated RHEL6 libvirt Xen-specific tests seem to fail in Xen dom0 environment, but work OK in baremetal." -- Pasi > I did get Xen 4.0.1 installed and dom0 running, so I am already > further than I was before you released your tutorial. I had been stuck > on the qemu-nbd step. :) > > Digimer > > TEST: xencapstest > !!!!!!!!!! 10 FAIL > FAIL: xencapstest ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-19 6:57 ` Pasi Kärkkäinen @ 2010-11-19 15:38 ` Digimer 2010-11-19 16:22 ` Digimer 2011-11-19 11:59 ` [Xen-users] " beeckmans.o 2 siblings, 0 replies; 46+ messages in thread From: Digimer @ 2010-11-19 15:38 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: xen-devel, xen-users On 11/19/2010 01:57 AM, Pasi Kärkkäinen wrote: >> I ran into a problem at the libvirt stage. After applying your patch >> and while building the spec I got the error below. Might you have some >> advice? >> > > It seems you didn't read well enough ;) > > "Before rebuilding libvirt you need to boot into non-Xen environment! This is because some of the automated RHEL6 libvirt Xen-specific tests seem to fail in Xen dom0 environment, but work OK in baremetal." > > -- Pasi See, this is why I shouldn't be working until after midnight so many nights. I fail to see the obvious. *sigh* :P -- Digimer E-Mail: digimer@alteeve.com AN!Whitepapers: http://alteeve.com Node Assassin: http://nodeassassin.org ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-19 6:57 ` Pasi Kärkkäinen 2010-11-19 15:38 ` Digimer @ 2010-11-19 16:22 ` Digimer 2010-11-19 16:26 ` Pasi Kärkkäinen 2011-11-19 11:59 ` [Xen-users] " beeckmans.o 2 siblings, 1 reply; 46+ messages in thread From: Digimer @ 2010-11-19 16:22 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: xen-devel, xen-users On 11/19/2010 01:57 AM, Pasi Kärkkäinen wrote: > It seems you didn't read well enough ;) > > "Before rebuilding libvirt you need to boot into non-Xen environment! This is because some of the automated RHEL6 libvirt Xen-specific tests seem to fail in Xen dom0 environment, but work OK in baremetal." > > -- Pasi Heh, I'm hesitant to ask now, in case it's another instance of me failing to read, but... :) When I first start virt-manager, I get an error/warning saying that 'qemu-kvm' should be installed. I realize this isn't important, as we're running Xen, but I wanted to try to resolve it just the same. So I tried to install qemu-kvm from the rebuilt qemu RPMs made earlier in the tutorial. This led to a requirement I've not been able to meet: rpm -ivh rpmbuild/RPMS/x86_64/qemu-system-x86-0.12.5-1.el6.x86_64.rpm \ rpmbuild/RPMS/x86_64/qemu-kvm-0.12.5-1.el6.x86_64.rpm error: Failed dependencies: seabios-bin is needed by qemu-system-x86-2:0.12.5-1.el6.x86_64 yum provides \*/seabios-bin Loaded plugins: refresh-packagekit, rhnplugin No Matches found I tried rebuilding 'seabios', but it didn't provide seabios-bin either. Thanks, and sorry in advance if I am missing something obvious (again). :) -- Digimer E-Mail: digimer@alteeve.com AN!Whitepapers: http://alteeve.com Node Assassin: http://nodeassassin.org ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-19 16:22 ` Digimer @ 2010-11-19 16:26 ` Pasi Kärkkäinen 2010-11-19 16:43 ` Digimer 0 siblings, 1 reply; 46+ messages in thread From: Pasi Kärkkäinen @ 2010-11-19 16:26 UTC (permalink / raw) To: Digimer; +Cc: xen-devel, xen-users On Fri, Nov 19, 2010 at 11:22:39AM -0500, Digimer wrote: > On 11/19/2010 01:57 AM, Pasi Kärkkäinen wrote: >> It seems you didn't read well enough ;) >> >> "Before rebuilding libvirt you need to boot into non-Xen environment! This is because some of the automated RHEL6 libvirt Xen-specific tests seem to fail in Xen dom0 environment, but work OK in baremetal." >> >> -- Pasi > > Heh, I'm hesitant to ask now, in case it's another instance of me > failing to read, but... :) > > When I first start virt-manager, I get an error/warning saying that > 'qemu-kvm' should be installed. > I haven't seen this error on my system. > I realize this isn't important, as we're > running Xen, but I wanted to try to resolve it just the same. So I tried > to install qemu-kvm from the rebuilt qemu RPMs made earlier in the > tutorial. This led to a requirement I've not been able to meet: > > rpm -ivh rpmbuild/RPMS/x86_64/qemu-system-x86-0.12.5-1.el6.x86_64.rpm \ > rpmbuild/RPMS/x86_64/qemu-kvm-0.12.5-1.el6.x86_64.rpm > error: Failed dependencies: > seabios-bin is needed by qemu-system-x86-2:0.12.5-1.el6.x86_64 > yum provides \*/seabios-bin > Loaded plugins: refresh-packagekit, rhnplugin > No Matches found I don't think you should install those rpms, since RHEL6 already has kvm included. You need to only install the additional "qemu-common" rpm, since that provides the stuff that Xen rpm depends on. -- Pasi ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-19 16:26 ` Pasi Kärkkäinen @ 2010-11-19 16:43 ` Digimer 0 siblings, 0 replies; 46+ messages in thread From: Digimer @ 2010-11-19 16:43 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: xen-devel, xen-users On 11/19/2010 11:26 AM, Pasi Kärkkäinen wrote: > On Fri, Nov 19, 2010 at 11:22:39AM -0500, Digimer wrote: >> On 11/19/2010 01:57 AM, Pasi Kärkkäinen wrote: >>> It seems you didn't read well enough ;) >>> >>> "Before rebuilding libvirt you need to boot into non-Xen environment! This is because some of the automated RHEL6 libvirt Xen-specific tests seem to fail in Xen dom0 environment, but work OK in baremetal." >>> >>> -- Pasi >> >> Heh, I'm hesitant to ask now, in case it's another instance of me >> failing to read, but... :) >> >> When I first start virt-manager, I get an error/warning saying that >> 'qemu-kvm' should be installed. >> > > I haven't seen this error on my system. > >> I realize this isn't important, as we're >> running Xen, but I wanted to try to resolve it just the same. So I tried >> to install qemu-kvm from the rebuilt qemu RPMs made earlier in the >> tutorial. This led to a requirement I've not been able to meet: >> >> rpm -ivh rpmbuild/RPMS/x86_64/qemu-system-x86-0.12.5-1.el6.x86_64.rpm \ >> rpmbuild/RPMS/x86_64/qemu-kvm-0.12.5-1.el6.x86_64.rpm >> error: Failed dependencies: >> seabios-bin is needed by qemu-system-x86-2:0.12.5-1.el6.x86_64 >> yum provides \*/seabios-bin >> Loaded plugins: refresh-packagekit, rhnplugin >> No Matches found > > I don't think you should install those rpms, since RHEL6 already > has kvm included. > > You need to only install the additional "qemu-common" rpm, > since that provides the stuff that Xen rpm depends on. Indeed. More than anything, I am concerned that customers might see the error and worry. I know it doesn't effect Xen at all. :) Well, I'll move on then. I now need to get DRBD compiled against this kernel. Thank you again. -- Digimer E-Mail: digimer@alteeve.com AN!Whitepapers: http://alteeve.com Node Assassin: http://nodeassassin.org ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) 2010-11-19 6:57 ` Pasi Kärkkäinen 2010-11-19 15:38 ` Digimer 2010-11-19 16:22 ` Digimer @ 2011-11-19 11:59 ` beeckmans.o 2 siblings, 0 replies; 46+ messages in thread From: beeckmans.o @ 2011-11-19 11:59 UTC (permalink / raw) To: xen-devel [-- Attachment #1.1: Type: text/plain, Size: 340 bytes --] Thanks Digimer for this respons. I've booted in non xen environement. And the xencapstest PASS now Many Thanks Olivier -- View this message in context: http://xen.1045712.n5.nabble.com/HOWTO-Running-Xen-4-0-host-dom0-with-Redhat-Enterprise-Linux-6-RHEL6-tp3271407p5006651.html Sent from the Xen - Dev mailing list archive at Nabble.com. [-- Attachment #1.2: Type: text/html, Size: 559 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) xen fails to build 2010-11-19 4:30 ` Digimer 2010-11-19 6:57 ` Pasi Kärkkäinen @ 2010-11-23 12:24 ` Boris Derzhavets 2010-11-23 12:35 ` Michal Novotny 1 sibling, 1 reply; 46+ messages in thread From: Boris Derzhavets @ 2010-11-23 12:24 UTC (permalink / raw) To: Pasi Kärkkäinen, Digimer; +Cc: xen-devel, xen-users [-- Attachment #1.1: Type: text/plain, Size: 326 bytes --] In meantime :- [root@Server6RH SPECS]# rpmbuild -bb ./xen.spec error: Failed build dependencies: texi2html is needed by xen-4.0.1-6.el6.x86_64 dev86 is needed by xen-4.0.1-6.el6.x86_64 pciutils-devel is needed by xen-4.0.1-6.el6.x86_64 iasl is needed by xen-4.0.1-6.el6.x86_64 Boris. [-- Attachment #1.2: Type: text/html, Size: 535 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) xen fails to build 2010-11-23 12:24 ` Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) xen fails to build Boris Derzhavets @ 2010-11-23 12:35 ` Michal Novotny 2010-11-23 12:45 ` Boris Derzhavets 2010-11-23 13:03 ` [Xen-devel] " Boris Derzhavets 0 siblings, 2 replies; 46+ messages in thread From: Michal Novotny @ 2010-11-23 12:35 UTC (permalink / raw) To: Boris Derzhavets; +Cc: xen-devel, Digimer, xen-users If you're subscribed into Optional channel (and maybe some other channel too) in RHN you should be able to download and install them using yum, i.e. # yum install texi2html dev86 pciutils-devel iasl command. After that you should be able to recompile. In RHEL-6 environment you can always try either to google for the package or, better, use `yum install` command to install the dependencies required. Michal On 11/23/2010 01:24 PM, Boris Derzhavets wrote: > In meantime :- > > [root@Server6RH SPECS]# rpmbuild -bb ./xen.spec > error: Failed build dependencies: > texi2html is needed by xen-4.0.1-6.el6.x86_64 > dev86 is needed by xen-4.0.1-6.el6.x86_64 > pciutils-devel is needed by xen-4.0.1-6.el6.x86_64 > iasl is needed by xen-4.0.1-6.el6.x86_64 > > > Boris. > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel -- Michal Novotny<minovotn@redhat.com>, RHCE Virtualization Team (xen userspace), Red Hat ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) xen fails to build 2010-11-23 12:35 ` Michal Novotny @ 2010-11-23 12:45 ` Boris Derzhavets 2010-11-23 19:09 ` [Xen-devel] " Pasi Kärkkäinen 2010-11-23 13:03 ` [Xen-devel] " Boris Derzhavets 1 sibling, 1 reply; 46+ messages in thread From: Boris Derzhavets @ 2010-11-23 12:45 UTC (permalink / raw) To: Michal Novotny; +Cc: xen-devel, Digimer, xen-users [-- Attachment #1.1: Type: text/plain, Size: 1723 bytes --] It seems to be impossible reconnect to RHN to subscribe to optional channel. During registration (30 days evaluation account) i was not given any option. Boris. --- On Tue, 11/23/10, Michal Novotny <minovotn@redhat.com> wrote: From: Michal Novotny <minovotn@redhat.com> Subject: Re: [Xen-devel] Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) xen fails to build To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: "Pasi Kärkkäinen" <pasik@iki.fi>, "Digimer" <linux@alteeve.com>, xen-devel@lists.xensource.com, xen-users@lists.xensource.com Date: Tuesday, November 23, 2010, 7:35 AM If you're subscribed into Optional channel (and maybe some other channel too) in RHN you should be able to download and install them using yum, i.e. # yum install texi2html dev86 pciutils-devel iasl command. After that you should be able to recompile. In RHEL-6 environment you can always try either to google for the package or, better, use `yum install` command to install the dependencies required. Michal On 11/23/2010 01:24 PM, Boris Derzhavets wrote: > In meantime :- > > [root@Server6RH SPECS]# rpmbuild -bb ./xen.spec > error: Failed build dependencies: > texi2html is needed by xen-4.0.1-6.el6.x86_64 > dev86 is needed by xen-4.0.1-6.el6.x86_64 > pciutils-devel is needed by xen-4.0.1-6.el6.x86_64 > iasl is needed by xen-4.0.1-6.el6.x86_64 > > > Boris. > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel -- Michal Novotny<minovotn@redhat.com>, RHCE Virtualization Team (xen userspace), Red Hat [-- Attachment #1.2: Type: text/html, Size: 2525 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Xen-devel] Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) xen fails to build 2010-11-23 12:45 ` Boris Derzhavets @ 2010-11-23 19:09 ` Pasi Kärkkäinen 2010-11-23 19:23 ` Re: [Xen-users] " Boris Derzhavets 0 siblings, 1 reply; 46+ messages in thread From: Pasi Kärkkäinen @ 2010-11-23 19:09 UTC (permalink / raw) To: Boris Derzhavets; +Cc: Michal Novotny, xen-devel, xen-users, Digimer On Tue, Nov 23, 2010 at 04:45:25AM -0800, Boris Derzhavets wrote: > It seems to be impossible reconnect to RHN to subscribe to optional > channel. During registration (30 days evaluation account) i was not given > any > option. > RHN channel subscriptions are changed from the RHN website, not from the RHEL6 server.. So maybe that's the problem.. -- Pasi > Boris. > > --- On Tue, 11/23/10, Michal Novotny <minovotn@redhat.com> wrote: > > From: Michal Novotny <minovotn@redhat.com> > Subject: Re: [Xen-devel] Re: [Xen-users] [HOWTO] Running Xen 4.0 host > (dom0) with Redhat Enterprise Linux 6 (RHEL6) xen fails to build > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > Cc: "Pasi Kärkkäinen" <pasik@iki.fi>, "Digimer" <linux@alteeve.com>, > xen-devel@lists.xensource.com, xen-users@lists.xensource.com > Date: Tuesday, November 23, 2010, 7:35 AM > > If you're subscribed into Optional channel (and maybe some other channel > too) in RHN you should be able to download and install them using yum, > i.e. > > # yum install texi2html dev86 pciutils-devel iasl > > command. After that you should be able to recompile. In RHEL-6 > environment you can always try either to google for the package or, > better, use `yum install` command to install the dependencies required. > > Michal > > On 11/23/2010 01:24 PM, Boris Derzhavets wrote: > > In meantime :- > > > > [root@Server6RH SPECS]# rpmbuild -bb ./xen.spec > > error: Failed build dependencies: > > texi2html is needed by xen-4.0.1-6.el6.x86_64 > > dev86 is needed by xen-4.0.1-6.el6.x86_64 > > pciutils-devel is needed by xen-4.0.1-6.el6.x86_64 > > iasl is needed by xen-4.0.1-6.el6.x86_64 > > > > > > Boris. > > > > > > > > _______________________________________________ > > Xen-devel mailing list > > [1]Xen-devel@lists.xensource.com > > [2]http://lists.xensource.com/xen-devel > > -- > Michal Novotny<[3]minovotn@redhat.com>, RHCE > Virtualization Team (xen userspace), Red Hat > > References > > Visible links > 1. file:///mc/compose?to=Xen-devel@lists.xensource.com > 2. http://lists.xensource.com/xen-devel > 3. file:///mc/compose?to=minovotn@redhat.com ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) xen fails to build 2010-11-23 19:09 ` [Xen-devel] " Pasi Kärkkäinen @ 2010-11-23 19:23 ` Boris Derzhavets 0 siblings, 0 replies; 46+ messages in thread From: Boris Derzhavets @ 2010-11-23 19:23 UTC (permalink / raw) To: Pasi Kärkkäinen; +Cc: Michal Novotny, xen-devel, xen-users, Digimer [-- Attachment #1.1: Type: text/plain, Size: 3469 bytes --] Thanks, Pasi. I found out it about 7 hr ago and sent message to list. "rhn_register" works just once and installs basic channel ( via server's session) Afterwards one should login to rhn.redhat.com and change subscription to "Optional" inside account . All your hackery works fine. I've also tried to rebuild Michael's xendom0 .32.25-172.src.rpm . It generates problem with kernel-firmware.rpm. I would not expect him to fix it , until CentOS 6.0 will be out. Boris. P.S. asciidoc dependency may be dropped during .32.25-172.src.rpm rebuild. --- On Tue, 11/23/10, Pasi Kärkkäinen <pasik@iki.fi> wrote: From: Pasi Kärkkäinen <pasik@iki.fi> Subject: Re: [Xen-devel] Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) xen fails to build To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: "Michal Novotny" <minovotn@redhat.com>, "Digimer" <linux@alteeve.com>, xen-devel@lists.xensource.com, xen-users@lists.xensource.com Date: Tuesday, November 23, 2010, 2:09 PM On Tue, Nov 23, 2010 at 04:45:25AM -0800, Boris Derzhavets wrote: > It seems to be impossible reconnect to RHN to subscribe to optional > channel. During registration (30 days evaluation account) i was not given > any > option. > RHN channel subscriptions are changed from the RHN website, not from the RHEL6 server.. So maybe that's the problem.. -- Pasi > Boris. > > --- On Tue, 11/23/10, Michal Novotny <minovotn@redhat.com> wrote: > > From: Michal Novotny <minovotn@redhat.com> > Subject: Re: [Xen-devel] Re: [Xen-users] [HOWTO] Running Xen 4.0 host > (dom0) with Redhat Enterprise Linux 6 (RHEL6) xen fails to build > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > Cc: "Pasi Kärkkäinen" <pasik@iki.fi>, "Digimer" <linux@alteeve.com>, > xen-devel@lists.xensource.com, xen-users@lists.xensource.com > Date: Tuesday, November 23, 2010, 7:35 AM > > If you're subscribed into Optional channel (and maybe some other channel > too) in RHN you should be able to download and install them using yum, > i.e. > > # yum install texi2html dev86 pciutils-devel iasl > > command. After that you should be able to recompile. In RHEL-6 > environment you can always try either to google for the package or, > better, use `yum install` command to install the dependencies required. > > Michal > > On 11/23/2010 01:24 PM, Boris Derzhavets wrote: > > In meantime :- > > > > [root@Server6RH SPECS]# rpmbuild -bb ./xen.spec > > error: Failed build dependencies: > > texi2html is needed by xen-4.0.1-6.el6.x86_64 > > dev86 is needed by xen-4.0.1-6.el6.x86_64 > > pciutils-devel is needed by xen-4.0.1-6.el6.x86_64 > > iasl is needed by xen-4.0.1-6.el6.x86_64 > > > > > > Boris. > > > > > > > > _______________________________________________ > > Xen-devel mailing list > > [1]Xen-devel@lists.xensource.com > > [2]http://lists.xensource.com/xen-devel > > -- > Michal Novotny<[3]minovotn@redhat.com>, RHCE > Virtualization Team (xen userspace), Red Hat > > References > > Visible links > 1. file:///mc/compose?to=Xen-devel@lists.xensource.com > 2. http://lists.xensource.com/xen-devel > 3. file:///mc/compose?to=minovotn@redhat.com [-- Attachment #1.2: Type: text/html, Size: 6124 bytes --] [-- Attachment #2: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Xen-devel] Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) xen fails to build 2010-11-23 12:35 ` Michal Novotny 2010-11-23 12:45 ` Boris Derzhavets @ 2010-11-23 13:03 ` Boris Derzhavets 2010-11-23 14:20 ` [Xen-devel] Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) . Link for Libvirt 0.8.1 Boris Derzhavets 1 sibling, 1 reply; 46+ messages in thread From: Boris Derzhavets @ 2010-11-23 13:03 UTC (permalink / raw) To: Michal Novotny; +Cc: xen-devel, xen-users, Digimer [-- Attachment #1.1: Type: text/plain, Size: 1745 bytes --] I did subscription to Optinal Channel via login to RHN. Thank you. Boris --- On Tue, 11/23/10, Michal Novotny <minovotn@redhat.com> wrote: From: Michal Novotny <minovotn@redhat.com> Subject: Re: [Xen-devel] Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) xen fails to build To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: xen-devel@lists.xensource.com, "Digimer" <linux@alteeve.com>, xen-users@lists.xensource.com Date: Tuesday, November 23, 2010, 7:35 AM If you're subscribed into Optional channel (and maybe some other channel too) in RHN you should be able to download and install them using yum, i.e. # yum install texi2html dev86 pciutils-devel iasl command. After that you should be able to recompile. In RHEL-6 environment you can always try either to google for the package or, better, use `yum install` command to install the dependencies required. Michal On 11/23/2010 01:24 PM, Boris Derzhavets wrote: > In meantime :- > > [root@Server6RH SPECS]# rpmbuild -bb ./xen.spec > error: Failed build dependencies: > texi2html is needed by xen-4.0.1-6.el6.x86_64 > dev86 is needed by xen-4.0.1-6.el6.x86_64 > pciutils-devel is needed by xen-4.0.1-6.el6.x86_64 > iasl is needed by xen-4.0.1-6.el6.x86_64 > > > Boris. > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel -- Michal Novotny<minovotn@redhat.com>, RHCE Virtualization Team (xen userspace), Red Hat _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel [-- Attachment #1.2: Type: text/html, Size: 2724 bytes --] [-- Attachment #2: Type: text/plain, Size: 137 bytes --] _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Xen-devel] Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) . Link for Libvirt 0.8.1 2010-11-23 13:03 ` [Xen-devel] " Boris Derzhavets @ 2010-11-23 14:20 ` Boris Derzhavets 2010-11-23 14:36 ` Digimer 2010-11-23 18:42 ` Re: [Xen-users] " Pasi Kärkkäinen 0 siblings, 2 replies; 46+ messages in thread From: Boris Derzhavets @ 2010-11-23 14:20 UTC (permalink / raw) To: Michal Novotny; +Cc: xen-devel, xen-users, Digimer [-- Attachment #1.1: Type: text/plain, Size: 2554 bytes --] I believe path to libvirt :- ftp://ftp.redhat.com/pub/redhat/linux/enterprise/6Server/en/os/SRPMS/libvirt-0.8.1-27.el6.src.rpm It doesn't match "Howto" Boris. --- On Tue, 11/23/10, Boris Derzhavets <bderzhavets@yahoo.com> wrote: From: Boris Derzhavets <bderzhavets@yahoo.com> Subject: Re: [Xen-devel] Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) xen fails to build To: "Michal Novotny" <minovotn@redhat.com> Cc: xen-devel@lists.xensource.com, xen-users@lists.xensource.com, "Digimer" <linux@alteeve.com> Date: Tuesday, November 23, 2010, 8:03 AM I did subscription to Optinal Channel via login to RHN. Thank you. Boris --- On Tue, 11/23/10, Michal Novotny <minovotn@redhat.com> wrote: From: Michal Novotny <minovotn@redhat.com> Subject: Re: [Xen-devel] Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) xen fails to build To: "Boris Derzhavets" <bderzhavets@yahoo.com> Cc: xen-devel@lists.xensource.com, "Digimer" <linux@alteeve.com>, xen-users@lists.xensource.com Date: Tuesday, November 23, 2010, 7:35 AM If you're subscribed into Optional channel (and maybe some other channel too) in RHN you should be able to download and install them using yum, i.e. # yum install texi2html dev86 pciutils-devel iasl command. After that you should be able to recompile. In RHEL-6 environment you can always try either to google for the package or, better, use `yum install` command to install the dependencies required. Michal On 11/23/2010 01:24 PM, Boris Derzhavets wrote: > In meantime :- > > [root@Server6RH SPECS]# rpmbuild -bb ./xen.spec > error: Failed build dependencies: > texi2html is needed by xen-4.0.1-6.el6.x86_64 > dev86 is needed by xen-4.0.1-6.el6.x86_64 > pciutils-devel is needed by xen-4.0.1-6.el6.x86_64 > iasl is needed by xen-4.0.1-6.el6.x86_64 > > > Boris. > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel -- Michal Novotny<minovotn@redhat.com>, RHCE Virtualization Team (xen userspace), Red Hat _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel -----Inline Attachment Follows----- _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users [-- Attachment #1.2: Type: text/html, Size: 3894 bytes --] [-- Attachment #2: Type: text/plain, Size: 137 bytes --] _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Xen-devel] Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) . Link for Libvirt 0.8.1 2010-11-23 14:20 ` [Xen-devel] Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) . Link for Libvirt 0.8.1 Boris Derzhavets @ 2010-11-23 14:36 ` Digimer 2010-11-23 19:15 ` Pasi Kärkkäinen 2010-11-23 18:42 ` Re: [Xen-users] " Pasi Kärkkäinen 1 sibling, 1 reply; 46+ messages in thread From: Digimer @ 2010-11-23 14:36 UTC (permalink / raw) To: Boris Derzhavets; +Cc: Michal Novotny, xen-devel, xen-users On 11/23/2010 09:20 AM, Boris Derzhavets wrote: > I believe path to libvirt :- > > ftp://ftp.redhat.com/pub/redhat/linux/enterprise/6Server/en/os/SRPMS/libvirt-0.8.1-27.el6.src.rpm > > It doesn't match "Howto" > > Boris. ftp://ftp.redhat.com/pub/redhat/linux/enterprise/6Server/en/os/SRPMS/libvirt-0.8.1-27.el6.src.rpm Just checked, it's there. Red Hat did change the URL yesterday though. -- Digimer E-Mail: digimer@alteeve.com AN!Whitepapers: http://alteeve.com Node Assassin: http://nodeassassin.org ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Xen-devel] Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) . Link for Libvirt 0.8.1 2010-11-23 14:36 ` Digimer @ 2010-11-23 19:15 ` Pasi Kärkkäinen 0 siblings, 0 replies; 46+ messages in thread From: Pasi Kärkkäinen @ 2010-11-23 19:15 UTC (permalink / raw) To: Digimer; +Cc: Boris Derzhavets, xen-devel, Michal Novotny, xen-users On Tue, Nov 23, 2010 at 09:36:27AM -0500, Digimer wrote: > On 11/23/2010 09:20 AM, Boris Derzhavets wrote: >> I believe path to libvirt :- >> >> ftp://ftp.redhat.com/pub/redhat/linux/enterprise/6Server/en/os/SRPMS/libvirt-0.8.1-27.el6.src.rpm >> >> It doesn't match "Howto" >> >> Boris. > > ftp://ftp.redhat.com/pub/redhat/linux/enterprise/6Server/en/os/SRPMS/libvirt-0.8.1-27.el6.src.rpm > > Just checked, it's there. Red Hat did change the URL yesterday though. > Yep, I just updated the tutorial to have the proper link. -- Pasi ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) . Link for Libvirt 0.8.1 2010-11-23 14:20 ` [Xen-devel] Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) . Link for Libvirt 0.8.1 Boris Derzhavets 2010-11-23 14:36 ` Digimer @ 2010-11-23 18:42 ` Pasi Kärkkäinen 1 sibling, 0 replies; 46+ messages in thread From: Pasi Kärkkäinen @ 2010-11-23 18:42 UTC (permalink / raw) To: Boris Derzhavets; +Cc: Michal Novotny, xen-devel, xen-users, Digimer On Tue, Nov 23, 2010 at 06:20:52AM -0800, Boris Derzhavets wrote: > I believe path to libvirt :- > > ftp://ftp.redhat.com/pub/redhat/linux/enterprise/6Server/en/os/SRPMS/libvirt-0.8.1-27.el6.src.rpm > > It doesn't match "Howto" > Hmm.. the URL has changed, it seems.. I'll fix it. Thanks! -- Pasi > Boris. > > --- On Tue, 11/23/10, Boris Derzhavets <bderzhavets@yahoo.com> wrote: > > From: Boris Derzhavets <bderzhavets@yahoo.com> > Subject: Re: [Xen-devel] Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat > Enterprise Linux 6 (RHEL6) xen fails to build > To: "Michal Novotny" <minovotn@redhat.com> > Cc: xen-devel@lists.xensource.com, xen-users@lists.xensource.com, "Digimer" <linux@alteeve.com> > Date: Tuesday, November 23, 2010, 8:03 AM > > I did subscription to Optinal Channel via login to RHN. > > Thank you. > > Boris > > --- On Tue, 11/23/10, Michal Novotny <minovotn@redhat.com> wrote: > > From: Michal Novotny <minovotn@redhat.com> > Subject: Re: [Xen-devel] Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat > Enterprise Linux 6 (RHEL6) xen fails to build > To: "Boris Derzhavets" <bderzhavets@yahoo.com> > Cc: xen-devel@lists.xensource.com, "Digimer" <linux@alteeve.com>, > xen-users@lists.xensource.com > Date: Tuesday, November 23, 2010, 7:35 AM > > If you're subscribed into Optional channel (and maybe some other channel > too) in RHN you should be able to download and install them using yum, i.e. > > # yum install texi2html dev86 pciutils-devel iasl > > command. After that you should be able to recompile. In RHEL-6 > environment you can always try either to google for the package or, > better, use `yum install` command to install the dependencies required. > > Michal > > On 11/23/2010 01:24 PM, Boris Derzhavets wrote: > > In meantime :- > > > > [root@Server6RH SPECS]# rpmbuild -bb ./xen.spec > > error: Failed build dependencies: > > texi2html is needed by xen-4.0.1-6.el6.x86_64 > > dev86 is needed by xen-4.0.1-6.el6.x86_64 > > pciutils-devel is needed by xen-4.0.1-6.el6.x86_64 > > iasl is needed by xen-4.0.1-6.el6.x86_64 > > > > > > Boris. > > > > > > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xensource.com > > [1]http://lists.xensource.com/xen-devel > > -- > Michal Novotny<minovotn@redhat.com>, RHCE > Virtualization Team (xen userspace), Red Hat > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > [2]http://lists.xensource.com/xen-devel > > -----Inline Attachment Follows----- > > _______________________________________________ > Xen-users mailing list > [3]Xen-users@lists.xensource.com > [4]http://lists.xensource.com/xen-users > > References > > Visible links > 1. http://lists.xensource.com/xen-devel > 2. http://lists.xensource.com/xen-devel > 3. file:///mc/compose?to=Xen-users@lists.xensource.com > 4. http://lists.xensource.com/xen-users > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 46+ messages in thread
end of thread, other threads:[~2011-11-19 11:59 UTC | newest] Thread overview: 46+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2010-11-18 20:00 [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) Pasi Kärkkäinen 2010-11-18 20:14 ` Digimer 2010-11-18 20:37 ` [Xen-users] " Pasi Kärkkäinen 2010-11-29 18:40 ` [Xen-devel] " Boris Derzhavets 2010-11-29 19:40 ` Boris Derzhavets 2010-11-30 3:50 ` Digimer 2010-11-30 6:04 ` Boris Derzhavets 2010-11-30 14:43 ` Digimer 2010-11-30 14:45 ` Re: [Xen-users] " Boris Derzhavets 2010-11-30 14:46 ` [Xen-devel] " Digimer 2010-12-01 9:11 ` Re: [Xen-users] " Boris Derzhavets 2010-11-30 18:29 ` Pasi Kärkkäinen 2010-11-23 11:55 ` [Xen-devel] " Boris Derzhavets 2010-11-23 12:23 ` Re: [Xen-users] " Pasi Kärkkäinen 2010-11-23 12:31 ` Boris Derzhavets 2010-11-18 20:23 ` Rudi Ahlers 2010-11-18 20:39 ` [Xen-users] " Pasi Kärkkäinen 2010-11-19 17:08 ` Digimer 2010-11-19 17:11 ` [Xen-users] " Pasi Kärkkäinen 2010-11-19 18:04 ` Digimer 2010-11-19 18:28 ` Pasi Kärkkäinen 2010-11-19 19:07 ` Digimer 2010-11-19 19:15 ` [Xen-users] " Pasi Kärkkäinen 2010-11-22 15:08 ` [Xen-devel] " Konrad Rzeszutek Wilk 2010-11-22 15:26 ` Digimer 2010-11-22 15:59 ` Re: [Xen-users] " Konrad Rzeszutek Wilk 2010-11-18 20:44 ` Pasi Kärkkäinen 2010-11-18 20:57 ` M A Young 2010-11-18 21:02 ` Pasi Kärkkäinen 2010-11-19 4:30 ` Digimer 2010-11-19 6:57 ` Pasi Kärkkäinen 2010-11-19 15:38 ` Digimer 2010-11-19 16:22 ` Digimer 2010-11-19 16:26 ` Pasi Kärkkäinen 2010-11-19 16:43 ` Digimer 2011-11-19 11:59 ` [Xen-users] " beeckmans.o 2010-11-23 12:24 ` Re: [Xen-users] [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) xen fails to build Boris Derzhavets 2010-11-23 12:35 ` Michal Novotny 2010-11-23 12:45 ` Boris Derzhavets 2010-11-23 19:09 ` [Xen-devel] " Pasi Kärkkäinen 2010-11-23 19:23 ` Re: [Xen-users] " Boris Derzhavets 2010-11-23 13:03 ` [Xen-devel] " Boris Derzhavets 2010-11-23 14:20 ` [Xen-devel] Re: [HOWTO] Running Xen 4.0 host (dom0) with Redhat Enterprise Linux 6 (RHEL6) . Link for Libvirt 0.8.1 Boris Derzhavets 2010-11-23 14:36 ` Digimer 2010-11-23 19:15 ` Pasi Kärkkäinen 2010-11-23 18:42 ` Re: [Xen-users] " Pasi Kärkkäinen
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.