* Building kernel for Beagleboard-C4
@ 2014-12-25 11:46 Kövesdi György
2014-12-27 8:33 ` [Angstrom-devel] " Koen Kooi
0 siblings, 1 reply; 2+ messages in thread
From: Kövesdi György @ 2014-12-25 11:46 UTC (permalink / raw)
To: beagleboard, poky, angstrom-distro-devel
Hi,
I tried to build image for my Beagleboard-C4 using the recent version of
Angstrom and Yoctoproject/Poky, but got the following problem:
I compiled all kernels I found compatible with my board: 3.2, 3.3, 3.4,
3.7, 3.8, 3.14, including mainline and ti-staging, but none of them
running on my board. The result is the same for all:
--------------- 8< -------------------
...
Loading file "/boot/uImage" from mmc device 0:2 (xxa2)
3394824 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 80200000 ...
Image Name: Linux-3.3.7
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3394760 Bytes = 3.2 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
--------------- 8< -------------------
No more output, heartbeat LED is not blinking.
Except the version 3.14.25: it runs perfectly, but I could not compile
the package omap3-sgx-modules because it seems incompatible with this
kernel (4.05, 4.09, 5.01 versions). I can compile it with older kernels
(using the 4.09 version) but they do not run at all.
How can I build a working kernel+omap3-sgx-modules? Some years ago it
worked for me.
Thanx in advance
Gyorgy Kovesdi
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Angstrom-devel] Building kernel for Beagleboard-C4
2014-12-25 11:46 Building kernel for Beagleboard-C4 Kövesdi György
@ 2014-12-27 8:33 ` Koen Kooi
0 siblings, 0 replies; 2+ messages in thread
From: Koen Kooi @ 2014-12-27 8:33 UTC (permalink / raw)
To: Discussion of the angstrom distribution development; +Cc: beagleboard, poky
> Op 25 dec. 2014, om 12:46 heeft Kövesdi György <kgy@teledigit.eu> het volgende geschreven:
>
> Hi,
>
> I tried to build image for my Beagleboard-C4 using the recent version of Angstrom and Yoctoproject/Poky, but got the following problem:
> I compiled all kernels I found compatible with my board: 3.2, 3.3, 3.4, 3.7, 3.8, 3.14, including mainline and ti-staging, but none of them running on my board. The result is the same for all:
>
> --------------- 8< -------------------
> ...
> Loading file "/boot/uImage" from mmc device 0:2 (xxa2)
If you're still using uImage, your u-boot is too old, please use the matching u-boot found in $DEPLOY_DIR
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-12-27 8:33 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-12-25 11:46 Building kernel for Beagleboard-C4 Kövesdi György
2014-12-27 8:33 ` [Angstrom-devel] " Koen Kooi
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.