From: Bhavya Kapoor <b-kapoor@ti.com> To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>, <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org> Cc: <linux-arm-kernel@lists.infradead.org>, <vigneshr@ti.com>, <nm@ti.com>, <piyali_g@ti.com> Subject: Re: [EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes Date: Wed, 9 Nov 2022 12:17:55 +0530 [thread overview] Message-ID: <63f0841c-c268-957d-30a1-f1da29125870@ti.com> (raw) In-Reply-To: <f70346da-228e-79d2-7284-6c64cda7eda0@linaro.org> On 11/8/22 11:48 PM, Krzysztof Kozlowski wrote: > On 08/11/2022 08:32, Bhavya Kapoor wrote: >> J721S2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes >> for 8 channel ADCs for J721S2. >> >> Enable ADCs present on J721S2 soc. >> >> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> >> --- >> .../dts/ti/k3-j721s2-common-proc-board.dts | 14 +++++++ >> .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 40 +++++++++++++++++++ >> 2 files changed, 54 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >> index b210cc07c539..de9cb40273be 100644 >> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >> @@ -429,3 +429,17 @@ >> &main_mcan17 { >> status = "disabled"; >> }; >> + >> +&tscadc0 { >> + status = "okay"; >> + adc { >> + ti,adc-channels = <0 1 2 3 4 5 6 7>; >> + }; >> +}; >> + >> +&tscadc1 { >> + status = "okay"; >> + adc { >> + ti,adc-channels = <0 1 2 3 4 5 6 7>; >> + }; >> +}; >> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi >> index 4d1bfabd1313..47a7a6b500c2 100644 >> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi >> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi >> @@ -299,4 +299,44 @@ >> ti,cpts-periodic-outputs = <2>; >> }; >> }; >> + >> + tscadc0: tscadc@40200000 { > Node names should be generic, so "adc" > https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation tscadc is just a wrapper node. The actual adc node is inside of tscadc node. > > Best regards, > Krzysztof > Regards BK
WARNING: multiple messages have this Message-ID (diff)
From: Bhavya Kapoor <b-kapoor@ti.com> To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>, <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org> Cc: <linux-arm-kernel@lists.infradead.org>, <vigneshr@ti.com>, <nm@ti.com>, <piyali_g@ti.com> Subject: Re: [EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes Date: Wed, 9 Nov 2022 12:17:55 +0530 [thread overview] Message-ID: <63f0841c-c268-957d-30a1-f1da29125870@ti.com> (raw) In-Reply-To: <f70346da-228e-79d2-7284-6c64cda7eda0@linaro.org> On 11/8/22 11:48 PM, Krzysztof Kozlowski wrote: > On 08/11/2022 08:32, Bhavya Kapoor wrote: >> J721S2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes >> for 8 channel ADCs for J721S2. >> >> Enable ADCs present on J721S2 soc. >> >> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> >> --- >> .../dts/ti/k3-j721s2-common-proc-board.dts | 14 +++++++ >> .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 40 +++++++++++++++++++ >> 2 files changed, 54 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >> index b210cc07c539..de9cb40273be 100644 >> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts >> @@ -429,3 +429,17 @@ >> &main_mcan17 { >> status = "disabled"; >> }; >> + >> +&tscadc0 { >> + status = "okay"; >> + adc { >> + ti,adc-channels = <0 1 2 3 4 5 6 7>; >> + }; >> +}; >> + >> +&tscadc1 { >> + status = "okay"; >> + adc { >> + ti,adc-channels = <0 1 2 3 4 5 6 7>; >> + }; >> +}; >> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi >> index 4d1bfabd1313..47a7a6b500c2 100644 >> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi >> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi >> @@ -299,4 +299,44 @@ >> ti,cpts-periodic-outputs = <2>; >> }; >> }; >> + >> + tscadc0: tscadc@40200000 { > Node names should be generic, so "adc" > https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation tscadc is just a wrapper node. The actual adc node is inside of tscadc node. > > Best regards, > Krzysztof > Regards BK _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-11-09 6:48 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-11-08 7:32 [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes Bhavya Kapoor 2022-11-08 7:32 ` Bhavya Kapoor 2022-11-08 18:18 ` Krzysztof Kozlowski 2022-11-08 18:18 ` Krzysztof Kozlowski 2022-11-09 6:47 ` Bhavya Kapoor [this message] 2022-11-09 6:47 ` [EXTERNAL] " Bhavya Kapoor 2022-12-20 9:56 ` Bhavya Kapoor 2022-12-20 9:56 ` Bhavya Kapoor 2022-11-08 7:32 Bhavya Kapoor 2022-11-08 18:18 ` Krzysztof Kozlowski 2022-11-09 6:43 ` [EXTERNAL] " Bhavya Kapoor 2022-11-09 6:43 ` Bhavya Kapoor 2022-12-20 10:12 Bhavya Kapoor 2022-12-20 10:50 ` Krzysztof Kozlowski 2022-12-21 5:42 ` [EXTERNAL] " Bhavya Kapoor 2022-12-21 5:42 ` Bhavya Kapoor 2022-12-21 7:54 ` Krzysztof Kozlowski 2022-12-21 7:54 ` Krzysztof Kozlowski 2022-12-22 10:39 ` Bhavya Kapoor 2022-12-22 10:39 ` Bhavya Kapoor 2022-12-22 10:46 ` Krzysztof Kozlowski 2022-12-22 10:46 ` Krzysztof Kozlowski 2022-12-22 11:53 ` Bhavya Kapoor 2022-12-22 11:53 ` Bhavya Kapoor 2022-12-22 11:58 ` Krzysztof Kozlowski 2022-12-22 11:58 ` Krzysztof Kozlowski 2022-12-22 12:00 ` Krzysztof Kozlowski 2022-12-22 12:00 ` Krzysztof Kozlowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=63f0841c-c268-957d-30a1-f1da29125870@ti.com \ --to=b-kapoor@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=krzysztof.kozlowski@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=piyali_g@ti.com \ --cc=robh+dt@kernel.org \ --cc=vigneshr@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.