* [PATCH 1/5] arm: dts: mt7623: add a performance counter unit device node
@ 2018-09-05 10:22 ` Ryder Lee
0 siblings, 0 replies; 23+ messages in thread
From: Ryder Lee @ 2018-09-05 10:22 UTC (permalink / raw)
To: linux-arm-kernel
Add ARM PMU device node to enable hardware perf events.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 1cdc346..8c43bd0 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -121,6 +121,15 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
system_clk: dummy13m {
compatible = "fixed-clock";
clock-frequency = <13000000>;
--
1.9.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH 1/5] arm: dts: mt7623: add a performance counter unit device node
@ 2018-09-05 10:22 ` Ryder Lee
0 siblings, 0 replies; 23+ messages in thread
From: Ryder Lee @ 2018-09-05 10:22 UTC (permalink / raw)
To: Matthias Brugger
Cc: Sean Wang, Roy Luo, Weijie Gao, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek, Ryder Lee
Add ARM PMU device node to enable hardware perf events.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 1cdc346..8c43bd0 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -121,6 +121,15 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
system_clk: dummy13m {
compatible = "fixed-clock";
clock-frequency = <13000000>;
--
1.9.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH 2/5] arm: dts: mt7623: update subsystem clock controller device nodes
2018-09-05 10:22 ` Ryder Lee
(?)
@ 2018-09-05 10:22 ` Ryder Lee
-1 siblings, 0 replies; 23+ messages in thread
From: Ryder Lee @ 2018-09-05 10:22 UTC (permalink / raw)
To: Matthias Brugger
Cc: Sean Wang, Roy Luo, Weijie Gao, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek, Ryder Lee
Update MT7623 subsystem clock controllers, inlcuding mmsys, imgsys,
vdecsys, g3dsys and bdpsys.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 41 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 8c43bd0..b7ccf8b 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -692,6 +692,39 @@
status = "disabled";
};
+ g3dsys: syscon@13000000 {
+ compatible = "mediatek,mt7623-g3dsys",
+ "mediatek,mt2701-g3dsys",
+ "syscon";
+ reg = <0 0x13000000 0 0x200>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ mmsys: syscon@14000000 {
+ compatible = "mediatek,mt7623-mmsys",
+ "mediatek,mt2701-mmsys",
+ "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys: syscon@15000000 {
+ compatible = "mediatek,mt7623-imgsys",
+ "mediatek,mt2701-imgsys",
+ "syscon";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vdecsys: syscon@16000000 {
+ compatible = "mediatek,mt7623-vdecsys",
+ "mediatek,mt2701-vdecsys",
+ "syscon";
+ reg = <0 0x16000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
hifsys: syscon@1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
@@ -946,6 +979,14 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
status = "disabled";
};
+
+ bdpsys: syscon@1c000000 {
+ compatible = "mediatek,mt7623-bdpsys",
+ "mediatek,mt2701-bdpsys",
+ "syscon";
+ reg = <0 0x1c000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
};
&pio {
--
1.9.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH 2/5] arm: dts: mt7623: update subsystem clock controller device nodes
@ 2018-09-05 10:22 ` Ryder Lee
0 siblings, 0 replies; 23+ messages in thread
From: Ryder Lee @ 2018-09-05 10:22 UTC (permalink / raw)
To: linux-arm-kernel
Update MT7623 subsystem clock controllers, inlcuding mmsys, imgsys,
vdecsys, g3dsys and bdpsys.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 41 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 8c43bd0..b7ccf8b 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -692,6 +692,39 @@
status = "disabled";
};
+ g3dsys: syscon at 13000000 {
+ compatible = "mediatek,mt7623-g3dsys",
+ "mediatek,mt2701-g3dsys",
+ "syscon";
+ reg = <0 0x13000000 0 0x200>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ mmsys: syscon at 14000000 {
+ compatible = "mediatek,mt7623-mmsys",
+ "mediatek,mt2701-mmsys",
+ "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys: syscon at 15000000 {
+ compatible = "mediatek,mt7623-imgsys",
+ "mediatek,mt2701-imgsys",
+ "syscon";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vdecsys: syscon at 16000000 {
+ compatible = "mediatek,mt7623-vdecsys",
+ "mediatek,mt2701-vdecsys",
+ "syscon";
+ reg = <0 0x16000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
hifsys: syscon at 1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
@@ -946,6 +979,14 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
status = "disabled";
};
+
+ bdpsys: syscon at 1c000000 {
+ compatible = "mediatek,mt7623-bdpsys",
+ "mediatek,mt2701-bdpsys",
+ "syscon";
+ reg = <0 0x1c000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
};
&pio {
--
1.9.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH 2/5] arm: dts: mt7623: update subsystem clock controller device nodes
@ 2018-09-05 10:22 ` Ryder Lee
0 siblings, 0 replies; 23+ messages in thread
From: Ryder Lee @ 2018-09-05 10:22 UTC (permalink / raw)
To: Matthias Brugger
Cc: Sean Wang, Roy Luo, Weijie Gao, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek, Ryder Lee
Update MT7623 subsystem clock controllers, inlcuding mmsys, imgsys,
vdecsys, g3dsys and bdpsys.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 41 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 8c43bd0..b7ccf8b 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -692,6 +692,39 @@
status = "disabled";
};
+ g3dsys: syscon@13000000 {
+ compatible = "mediatek,mt7623-g3dsys",
+ "mediatek,mt2701-g3dsys",
+ "syscon";
+ reg = <0 0x13000000 0 0x200>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ mmsys: syscon@14000000 {
+ compatible = "mediatek,mt7623-mmsys",
+ "mediatek,mt2701-mmsys",
+ "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys: syscon@15000000 {
+ compatible = "mediatek,mt7623-imgsys",
+ "mediatek,mt2701-imgsys",
+ "syscon";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vdecsys: syscon@16000000 {
+ compatible = "mediatek,mt7623-vdecsys",
+ "mediatek,mt2701-vdecsys",
+ "syscon";
+ reg = <0 0x16000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
hifsys: syscon@1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
@@ -946,6 +979,14 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
status = "disabled";
};
+
+ bdpsys: syscon@1c000000 {
+ compatible = "mediatek,mt7623-bdpsys",
+ "mediatek,mt2701-bdpsys",
+ "syscon";
+ reg = <0 0x1c000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
};
&pio {
--
1.9.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* Re: [PATCH 2/5] arm: dts: mt7623: update subsystem clock controller device nodes
2018-09-05 10:22 ` Ryder Lee
@ 2018-09-25 15:46 ` Matthias Brugger
-1 siblings, 0 replies; 23+ messages in thread
From: Matthias Brugger @ 2018-09-25 15:46 UTC (permalink / raw)
To: Ryder Lee
Cc: Sean Wang, Roy Luo, Weijie Gao, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek
On 05/09/2018 12:22, Ryder Lee wrote:
> Update MT7623 subsystem clock controllers, inlcuding mmsys, imgsys,
> vdecsys, g3dsys and bdpsys.
>
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Applied to v4.19-next/dts32
> ---
> arch/arm/boot/dts/mt7623.dtsi | 41 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 41 insertions(+)
>
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index 8c43bd0..b7ccf8b 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -692,6 +692,39 @@
> status = "disabled";
> };
>
> + g3dsys: syscon@13000000 {
> + compatible = "mediatek,mt7623-g3dsys",
> + "mediatek,mt2701-g3dsys",
> + "syscon";
> + reg = <0 0x13000000 0 0x200>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + mmsys: syscon@14000000 {
> + compatible = "mediatek,mt7623-mmsys",
> + "mediatek,mt2701-mmsys",
> + "syscon";
> + reg = <0 0x14000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + imgsys: syscon@15000000 {
> + compatible = "mediatek,mt7623-imgsys",
> + "mediatek,mt2701-imgsys",
> + "syscon";
> + reg = <0 0x15000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + vdecsys: syscon@16000000 {
> + compatible = "mediatek,mt7623-vdecsys",
> + "mediatek,mt2701-vdecsys",
> + "syscon";
> + reg = <0 0x16000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> hifsys: syscon@1a000000 {
> compatible = "mediatek,mt7623-hifsys",
> "mediatek,mt2701-hifsys",
> @@ -946,6 +979,14 @@
> power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
> status = "disabled";
> };
> +
> + bdpsys: syscon@1c000000 {
> + compatible = "mediatek,mt7623-bdpsys",
> + "mediatek,mt2701-bdpsys",
> + "syscon";
> + reg = <0 0x1c000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> };
>
> &pio {
>
^ permalink raw reply [flat|nested] 23+ messages in thread* [PATCH 2/5] arm: dts: mt7623: update subsystem clock controller device nodes
@ 2018-09-25 15:46 ` Matthias Brugger
0 siblings, 0 replies; 23+ messages in thread
From: Matthias Brugger @ 2018-09-25 15:46 UTC (permalink / raw)
To: linux-arm-kernel
On 05/09/2018 12:22, Ryder Lee wrote:
> Update MT7623 subsystem clock controllers, inlcuding mmsys, imgsys,
> vdecsys, g3dsys and bdpsys.
>
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Applied to v4.19-next/dts32
> ---
> arch/arm/boot/dts/mt7623.dtsi | 41 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 41 insertions(+)
>
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index 8c43bd0..b7ccf8b 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -692,6 +692,39 @@
> status = "disabled";
> };
>
> + g3dsys: syscon at 13000000 {
> + compatible = "mediatek,mt7623-g3dsys",
> + "mediatek,mt2701-g3dsys",
> + "syscon";
> + reg = <0 0x13000000 0 0x200>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + mmsys: syscon at 14000000 {
> + compatible = "mediatek,mt7623-mmsys",
> + "mediatek,mt2701-mmsys",
> + "syscon";
> + reg = <0 0x14000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + imgsys: syscon at 15000000 {
> + compatible = "mediatek,mt7623-imgsys",
> + "mediatek,mt2701-imgsys",
> + "syscon";
> + reg = <0 0x15000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + vdecsys: syscon at 16000000 {
> + compatible = "mediatek,mt7623-vdecsys",
> + "mediatek,mt2701-vdecsys",
> + "syscon";
> + reg = <0 0x16000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> hifsys: syscon at 1a000000 {
> compatible = "mediatek,mt7623-hifsys",
> "mediatek,mt2701-hifsys",
> @@ -946,6 +979,14 @@
> power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
> status = "disabled";
> };
> +
> + bdpsys: syscon at 1c000000 {
> + compatible = "mediatek,mt7623-bdpsys",
> + "mediatek,mt2701-bdpsys",
> + "syscon";
> + reg = <0 0x1c000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> };
>
> &pio {
>
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 3/5] arm: dts: mt7623: add iommu/smi device nodes
2018-09-05 10:22 ` Ryder Lee
(?)
@ 2018-09-05 10:22 ` Ryder Lee
-1 siblings, 0 replies; 23+ messages in thread
From: Ryder Lee @ 2018-09-05 10:22 UTC (permalink / raw)
To: Matthias Brugger
Cc: Sean Wang, Roy Luo, Weijie Gao, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek, Ryder Lee
Add iommu/smi device nodes for MT7623.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 59 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index b7ccf8b..a46987b 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -13,6 +13,7 @@
#include <dt-bindings/power/mt2701-power.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/memory/mt2701-larb-port.h>
#include <dt-bindings/reset/mt2701-resets.h>
#include <dt-bindings/thermal/thermal.h>
@@ -286,6 +287,17 @@
clock-names = "system-clk", "rtc-clk";
};
+ smi_common: smi@1000c000 {
+ compatible = "mediatek,mt7623-smi-common",
+ "mediatek,mt2701-smi-common";
+ reg = <0 0x1000c000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_SMI>,
+ <&mmsys CLK_MM_SMI_COMMON>,
+ <&infracfg CLK_INFRA_SMI>;
+ clock-names = "apb", "smi", "async";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
pwrap: pwrap@1000d000 {
compatible = "mediatek,mt7623-pwrap",
"mediatek,mt2701-pwrap";
@@ -317,6 +329,17 @@
reg = <0 0x10200100 0 0x1c>;
};
+ iommu: mmsys_iommu@10205000 {
+ compatible = "mediatek,mt7623-m4u",
+ "mediatek,mt2701-m4u";
+ reg = <0 0x10205000 0 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_M4U>;
+ clock-names = "bclk";
+ mediatek,larbs = <&larb0 &larb1 &larb2>;
+ #iommu-cells = <1>;
+ };
+
efuse: efuse@10206000 {
compatible = "mediatek,mt7623-efuse",
"mediatek,mt8173-efuse";
@@ -709,6 +732,18 @@
#clock-cells = <1>;
};
+ larb0: larb@14010000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x14010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <0>;
+ clocks = <&mmsys CLK_MM_SMI_LARB0>,
+ <&mmsys CLK_MM_SMI_LARB0>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
imgsys: syscon@15000000 {
compatible = "mediatek,mt7623-imgsys",
"mediatek,mt2701-imgsys",
@@ -717,6 +752,18 @@
#clock-cells = <1>;
};
+ larb2: larb@15001000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x15001000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <2>;
+ clocks = <&imgsys CLK_IMG_SMI_COMM>,
+ <&imgsys CLK_IMG_SMI_COMM>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ };
+
vdecsys: syscon@16000000 {
compatible = "mediatek,mt7623-vdecsys",
"mediatek,mt2701-vdecsys",
@@ -725,6 +772,18 @@
#clock-cells = <1>;
};
+ larb1: larb@16010000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x16010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <1>;
+ clocks = <&vdecsys CLK_VDEC_CKGEN>,
+ <&vdecsys CLK_VDEC_LARB>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
+ };
+
hifsys: syscon@1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
--
1.9.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH 3/5] arm: dts: mt7623: add iommu/smi device nodes
@ 2018-09-05 10:22 ` Ryder Lee
0 siblings, 0 replies; 23+ messages in thread
From: Ryder Lee @ 2018-09-05 10:22 UTC (permalink / raw)
To: linux-arm-kernel
Add iommu/smi device nodes for MT7623.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 59 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index b7ccf8b..a46987b 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -13,6 +13,7 @@
#include <dt-bindings/power/mt2701-power.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/memory/mt2701-larb-port.h>
#include <dt-bindings/reset/mt2701-resets.h>
#include <dt-bindings/thermal/thermal.h>
@@ -286,6 +287,17 @@
clock-names = "system-clk", "rtc-clk";
};
+ smi_common: smi at 1000c000 {
+ compatible = "mediatek,mt7623-smi-common",
+ "mediatek,mt2701-smi-common";
+ reg = <0 0x1000c000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_SMI>,
+ <&mmsys CLK_MM_SMI_COMMON>,
+ <&infracfg CLK_INFRA_SMI>;
+ clock-names = "apb", "smi", "async";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
pwrap: pwrap at 1000d000 {
compatible = "mediatek,mt7623-pwrap",
"mediatek,mt2701-pwrap";
@@ -317,6 +329,17 @@
reg = <0 0x10200100 0 0x1c>;
};
+ iommu: mmsys_iommu at 10205000 {
+ compatible = "mediatek,mt7623-m4u",
+ "mediatek,mt2701-m4u";
+ reg = <0 0x10205000 0 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_M4U>;
+ clock-names = "bclk";
+ mediatek,larbs = <&larb0 &larb1 &larb2>;
+ #iommu-cells = <1>;
+ };
+
efuse: efuse at 10206000 {
compatible = "mediatek,mt7623-efuse",
"mediatek,mt8173-efuse";
@@ -709,6 +732,18 @@
#clock-cells = <1>;
};
+ larb0: larb at 14010000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x14010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <0>;
+ clocks = <&mmsys CLK_MM_SMI_LARB0>,
+ <&mmsys CLK_MM_SMI_LARB0>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
imgsys: syscon at 15000000 {
compatible = "mediatek,mt7623-imgsys",
"mediatek,mt2701-imgsys",
@@ -717,6 +752,18 @@
#clock-cells = <1>;
};
+ larb2: larb at 15001000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x15001000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <2>;
+ clocks = <&imgsys CLK_IMG_SMI_COMM>,
+ <&imgsys CLK_IMG_SMI_COMM>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ };
+
vdecsys: syscon at 16000000 {
compatible = "mediatek,mt7623-vdecsys",
"mediatek,mt2701-vdecsys",
@@ -725,6 +772,18 @@
#clock-cells = <1>;
};
+ larb1: larb at 16010000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x16010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <1>;
+ clocks = <&vdecsys CLK_VDEC_CKGEN>,
+ <&vdecsys CLK_VDEC_LARB>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
+ };
+
hifsys: syscon at 1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
--
1.9.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH 3/5] arm: dts: mt7623: add iommu/smi device nodes
@ 2018-09-05 10:22 ` Ryder Lee
0 siblings, 0 replies; 23+ messages in thread
From: Ryder Lee @ 2018-09-05 10:22 UTC (permalink / raw)
To: Matthias Brugger
Cc: Sean Wang, Roy Luo, Weijie Gao, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek, Ryder Lee
Add iommu/smi device nodes for MT7623.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 59 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index b7ccf8b..a46987b 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -13,6 +13,7 @@
#include <dt-bindings/power/mt2701-power.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/memory/mt2701-larb-port.h>
#include <dt-bindings/reset/mt2701-resets.h>
#include <dt-bindings/thermal/thermal.h>
@@ -286,6 +287,17 @@
clock-names = "system-clk", "rtc-clk";
};
+ smi_common: smi@1000c000 {
+ compatible = "mediatek,mt7623-smi-common",
+ "mediatek,mt2701-smi-common";
+ reg = <0 0x1000c000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_SMI>,
+ <&mmsys CLK_MM_SMI_COMMON>,
+ <&infracfg CLK_INFRA_SMI>;
+ clock-names = "apb", "smi", "async";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
pwrap: pwrap@1000d000 {
compatible = "mediatek,mt7623-pwrap",
"mediatek,mt2701-pwrap";
@@ -317,6 +329,17 @@
reg = <0 0x10200100 0 0x1c>;
};
+ iommu: mmsys_iommu@10205000 {
+ compatible = "mediatek,mt7623-m4u",
+ "mediatek,mt2701-m4u";
+ reg = <0 0x10205000 0 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_M4U>;
+ clock-names = "bclk";
+ mediatek,larbs = <&larb0 &larb1 &larb2>;
+ #iommu-cells = <1>;
+ };
+
efuse: efuse@10206000 {
compatible = "mediatek,mt7623-efuse",
"mediatek,mt8173-efuse";
@@ -709,6 +732,18 @@
#clock-cells = <1>;
};
+ larb0: larb@14010000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x14010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <0>;
+ clocks = <&mmsys CLK_MM_SMI_LARB0>,
+ <&mmsys CLK_MM_SMI_LARB0>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
imgsys: syscon@15000000 {
compatible = "mediatek,mt7623-imgsys",
"mediatek,mt2701-imgsys",
@@ -717,6 +752,18 @@
#clock-cells = <1>;
};
+ larb2: larb@15001000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x15001000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <2>;
+ clocks = <&imgsys CLK_IMG_SMI_COMM>,
+ <&imgsys CLK_IMG_SMI_COMM>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ };
+
vdecsys: syscon@16000000 {
compatible = "mediatek,mt7623-vdecsys",
"mediatek,mt2701-vdecsys",
@@ -725,6 +772,18 @@
#clock-cells = <1>;
};
+ larb1: larb@16010000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x16010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <1>;
+ clocks = <&vdecsys CLK_VDEC_CKGEN>,
+ <&vdecsys CLK_VDEC_LARB>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
+ };
+
hifsys: syscon@1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
--
1.9.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* Re: [PATCH 3/5] arm: dts: mt7623: add iommu/smi device nodes
2018-09-05 10:22 ` Ryder Lee
@ 2018-09-25 15:47 ` Matthias Brugger
-1 siblings, 0 replies; 23+ messages in thread
From: Matthias Brugger @ 2018-09-25 15:47 UTC (permalink / raw)
To: Ryder Lee
Cc: Sean Wang, Roy Luo, Weijie Gao, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek
On 05/09/2018 12:22, Ryder Lee wrote:
> Add iommu/smi device nodes for MT7623.
>
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Applied to v4.19-next/dts32
> ---
> arch/arm/boot/dts/mt7623.dtsi | 59 +++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 59 insertions(+)
>
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index b7ccf8b..a46987b 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -13,6 +13,7 @@
> #include <dt-bindings/power/mt2701-power.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/memory/mt2701-larb-port.h>
> #include <dt-bindings/reset/mt2701-resets.h>
> #include <dt-bindings/thermal/thermal.h>
>
> @@ -286,6 +287,17 @@
> clock-names = "system-clk", "rtc-clk";
> };
>
> + smi_common: smi@1000c000 {
> + compatible = "mediatek,mt7623-smi-common",
> + "mediatek,mt2701-smi-common";
> + reg = <0 0x1000c000 0 0x1000>;
> + clocks = <&infracfg CLK_INFRA_SMI>,
> + <&mmsys CLK_MM_SMI_COMMON>,
> + <&infracfg CLK_INFRA_SMI>;
> + clock-names = "apb", "smi", "async";
> + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> + };
> +
> pwrap: pwrap@1000d000 {
> compatible = "mediatek,mt7623-pwrap",
> "mediatek,mt2701-pwrap";
> @@ -317,6 +329,17 @@
> reg = <0 0x10200100 0 0x1c>;
> };
>
> + iommu: mmsys_iommu@10205000 {
> + compatible = "mediatek,mt7623-m4u",
> + "mediatek,mt2701-m4u";
> + reg = <0 0x10205000 0 0x1000>;
> + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&infracfg CLK_INFRA_M4U>;
> + clock-names = "bclk";
> + mediatek,larbs = <&larb0 &larb1 &larb2>;
> + #iommu-cells = <1>;
> + };
> +
> efuse: efuse@10206000 {
> compatible = "mediatek,mt7623-efuse",
> "mediatek,mt8173-efuse";
> @@ -709,6 +732,18 @@
> #clock-cells = <1>;
> };
>
> + larb0: larb@14010000 {
> + compatible = "mediatek,mt7623-smi-larb",
> + "mediatek,mt2701-smi-larb";
> + reg = <0 0x14010000 0 0x1000>;
> + mediatek,smi = <&smi_common>;
> + mediatek,larb-id = <0>;
> + clocks = <&mmsys CLK_MM_SMI_LARB0>,
> + <&mmsys CLK_MM_SMI_LARB0>;
> + clock-names = "apb", "smi";
> + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> + };
> +
> imgsys: syscon@15000000 {
> compatible = "mediatek,mt7623-imgsys",
> "mediatek,mt2701-imgsys",
> @@ -717,6 +752,18 @@
> #clock-cells = <1>;
> };
>
> + larb2: larb@15001000 {
> + compatible = "mediatek,mt7623-smi-larb",
> + "mediatek,mt2701-smi-larb";
> + reg = <0 0x15001000 0 0x1000>;
> + mediatek,smi = <&smi_common>;
> + mediatek,larb-id = <2>;
> + clocks = <&imgsys CLK_IMG_SMI_COMM>,
> + <&imgsys CLK_IMG_SMI_COMM>;
> + clock-names = "apb", "smi";
> + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
> + };
> +
> vdecsys: syscon@16000000 {
> compatible = "mediatek,mt7623-vdecsys",
> "mediatek,mt2701-vdecsys",
> @@ -725,6 +772,18 @@
> #clock-cells = <1>;
> };
>
> + larb1: larb@16010000 {
> + compatible = "mediatek,mt7623-smi-larb",
> + "mediatek,mt2701-smi-larb";
> + reg = <0 0x16010000 0 0x1000>;
> + mediatek,smi = <&smi_common>;
> + mediatek,larb-id = <1>;
> + clocks = <&vdecsys CLK_VDEC_CKGEN>,
> + <&vdecsys CLK_VDEC_LARB>;
> + clock-names = "apb", "smi";
> + power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
> + };
> +
> hifsys: syscon@1a000000 {
> compatible = "mediatek,mt7623-hifsys",
> "mediatek,mt2701-hifsys",
>
^ permalink raw reply [flat|nested] 23+ messages in thread* [PATCH 3/5] arm: dts: mt7623: add iommu/smi device nodes
@ 2018-09-25 15:47 ` Matthias Brugger
0 siblings, 0 replies; 23+ messages in thread
From: Matthias Brugger @ 2018-09-25 15:47 UTC (permalink / raw)
To: linux-arm-kernel
On 05/09/2018 12:22, Ryder Lee wrote:
> Add iommu/smi device nodes for MT7623.
>
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Applied to v4.19-next/dts32
> ---
> arch/arm/boot/dts/mt7623.dtsi | 59 +++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 59 insertions(+)
>
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index b7ccf8b..a46987b 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -13,6 +13,7 @@
> #include <dt-bindings/power/mt2701-power.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/memory/mt2701-larb-port.h>
> #include <dt-bindings/reset/mt2701-resets.h>
> #include <dt-bindings/thermal/thermal.h>
>
> @@ -286,6 +287,17 @@
> clock-names = "system-clk", "rtc-clk";
> };
>
> + smi_common: smi at 1000c000 {
> + compatible = "mediatek,mt7623-smi-common",
> + "mediatek,mt2701-smi-common";
> + reg = <0 0x1000c000 0 0x1000>;
> + clocks = <&infracfg CLK_INFRA_SMI>,
> + <&mmsys CLK_MM_SMI_COMMON>,
> + <&infracfg CLK_INFRA_SMI>;
> + clock-names = "apb", "smi", "async";
> + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> + };
> +
> pwrap: pwrap at 1000d000 {
> compatible = "mediatek,mt7623-pwrap",
> "mediatek,mt2701-pwrap";
> @@ -317,6 +329,17 @@
> reg = <0 0x10200100 0 0x1c>;
> };
>
> + iommu: mmsys_iommu at 10205000 {
> + compatible = "mediatek,mt7623-m4u",
> + "mediatek,mt2701-m4u";
> + reg = <0 0x10205000 0 0x1000>;
> + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&infracfg CLK_INFRA_M4U>;
> + clock-names = "bclk";
> + mediatek,larbs = <&larb0 &larb1 &larb2>;
> + #iommu-cells = <1>;
> + };
> +
> efuse: efuse at 10206000 {
> compatible = "mediatek,mt7623-efuse",
> "mediatek,mt8173-efuse";
> @@ -709,6 +732,18 @@
> #clock-cells = <1>;
> };
>
> + larb0: larb at 14010000 {
> + compatible = "mediatek,mt7623-smi-larb",
> + "mediatek,mt2701-smi-larb";
> + reg = <0 0x14010000 0 0x1000>;
> + mediatek,smi = <&smi_common>;
> + mediatek,larb-id = <0>;
> + clocks = <&mmsys CLK_MM_SMI_LARB0>,
> + <&mmsys CLK_MM_SMI_LARB0>;
> + clock-names = "apb", "smi";
> + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> + };
> +
> imgsys: syscon at 15000000 {
> compatible = "mediatek,mt7623-imgsys",
> "mediatek,mt2701-imgsys",
> @@ -717,6 +752,18 @@
> #clock-cells = <1>;
> };
>
> + larb2: larb at 15001000 {
> + compatible = "mediatek,mt7623-smi-larb",
> + "mediatek,mt2701-smi-larb";
> + reg = <0 0x15001000 0 0x1000>;
> + mediatek,smi = <&smi_common>;
> + mediatek,larb-id = <2>;
> + clocks = <&imgsys CLK_IMG_SMI_COMM>,
> + <&imgsys CLK_IMG_SMI_COMM>;
> + clock-names = "apb", "smi";
> + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
> + };
> +
> vdecsys: syscon at 16000000 {
> compatible = "mediatek,mt7623-vdecsys",
> "mediatek,mt2701-vdecsys",
> @@ -725,6 +772,18 @@
> #clock-cells = <1>;
> };
>
> + larb1: larb at 16010000 {
> + compatible = "mediatek,mt7623-smi-larb",
> + "mediatek,mt2701-smi-larb";
> + reg = <0 0x16010000 0 0x1000>;
> + mediatek,smi = <&smi_common>;
> + mediatek,larb-id = <1>;
> + clocks = <&vdecsys CLK_VDEC_CKGEN>,
> + <&vdecsys CLK_VDEC_LARB>;
> + clock-names = "apb", "smi";
> + power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
> + };
> +
> hifsys: syscon at 1a000000 {
> compatible = "mediatek,mt7623-hifsys",
> "mediatek,mt2701-hifsys",
>
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 4/5] arm: dts: mt7623: add jpeg decoder device node
2018-09-05 10:22 ` Ryder Lee
(?)
@ 2018-09-05 10:22 ` Ryder Lee
-1 siblings, 0 replies; 23+ messages in thread
From: Ryder Lee @ 2018-09-05 10:22 UTC (permalink / raw)
To: Matthias Brugger
Cc: Sean Wang, Roy Luo, Weijie Gao, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek, Ryder Lee
Add a jpeg decoder device node for MT7623.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index a46987b..d01bdee 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -764,6 +764,21 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
};
+ jpegdec: jpegdec@15004000 {
+ compatible = "mediatek,mt7623-jpgdec",
+ "mediatek,mt2701-jpgdec";
+ reg = <0 0x15004000 0 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
+ <&imgsys CLK_IMG_JPGDEC>;
+ clock-names = "jpgdec-smi",
+ "jpgdec";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ mediatek,larb = <&larb2>;
+ iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+ <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+ };
+
vdecsys: syscon@16000000 {
compatible = "mediatek,mt7623-vdecsys",
"mediatek,mt2701-vdecsys",
--
1.9.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH 4/5] arm: dts: mt7623: add jpeg decoder device node
@ 2018-09-05 10:22 ` Ryder Lee
0 siblings, 0 replies; 23+ messages in thread
From: Ryder Lee @ 2018-09-05 10:22 UTC (permalink / raw)
To: linux-arm-kernel
Add a jpeg decoder device node for MT7623.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index a46987b..d01bdee 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -764,6 +764,21 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
};
+ jpegdec: jpegdec at 15004000 {
+ compatible = "mediatek,mt7623-jpgdec",
+ "mediatek,mt2701-jpgdec";
+ reg = <0 0x15004000 0 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
+ <&imgsys CLK_IMG_JPGDEC>;
+ clock-names = "jpgdec-smi",
+ "jpgdec";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ mediatek,larb = <&larb2>;
+ iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+ <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+ };
+
vdecsys: syscon at 16000000 {
compatible = "mediatek,mt7623-vdecsys",
"mediatek,mt2701-vdecsys",
--
1.9.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH 4/5] arm: dts: mt7623: add jpeg decoder device node
@ 2018-09-05 10:22 ` Ryder Lee
0 siblings, 0 replies; 23+ messages in thread
From: Ryder Lee @ 2018-09-05 10:22 UTC (permalink / raw)
To: Matthias Brugger
Cc: Sean Wang, Roy Luo, Weijie Gao, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek, Ryder Lee
Add a jpeg decoder device node for MT7623.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index a46987b..d01bdee 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -764,6 +764,21 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
};
+ jpegdec: jpegdec@15004000 {
+ compatible = "mediatek,mt7623-jpgdec",
+ "mediatek,mt2701-jpgdec";
+ reg = <0 0x15004000 0 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
+ <&imgsys CLK_IMG_JPGDEC>;
+ clock-names = "jpgdec-smi",
+ "jpgdec";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ mediatek,larb = <&larb2>;
+ iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+ <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+ };
+
vdecsys: syscon@16000000 {
compatible = "mediatek,mt7623-vdecsys",
"mediatek,mt2701-vdecsys",
--
1.9.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* Re: [PATCH 4/5] arm: dts: mt7623: add jpeg decoder device node
2018-09-05 10:22 ` Ryder Lee
@ 2018-09-25 15:47 ` Matthias Brugger
-1 siblings, 0 replies; 23+ messages in thread
From: Matthias Brugger @ 2018-09-25 15:47 UTC (permalink / raw)
To: Ryder Lee
Cc: Sean Wang, Roy Luo, Weijie Gao, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek
On 05/09/2018 12:22, Ryder Lee wrote:
> Add a jpeg decoder device node for MT7623.
>
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Applied to v4.19-next/dts32
> ---
> arch/arm/boot/dts/mt7623.dtsi | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index a46987b..d01bdee 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -764,6 +764,21 @@
> power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
> };
>
> + jpegdec: jpegdec@15004000 {
> + compatible = "mediatek,mt7623-jpgdec",
> + "mediatek,mt2701-jpgdec";
> + reg = <0 0x15004000 0 0x1000>;
> + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
> + <&imgsys CLK_IMG_JPGDEC>;
> + clock-names = "jpgdec-smi",
> + "jpgdec";
> + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
> + mediatek,larb = <&larb2>;
> + iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
> + <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
> + };
> +
> vdecsys: syscon@16000000 {
> compatible = "mediatek,mt7623-vdecsys",
> "mediatek,mt2701-vdecsys",
>
^ permalink raw reply [flat|nested] 23+ messages in thread* [PATCH 4/5] arm: dts: mt7623: add jpeg decoder device node
@ 2018-09-25 15:47 ` Matthias Brugger
0 siblings, 0 replies; 23+ messages in thread
From: Matthias Brugger @ 2018-09-25 15:47 UTC (permalink / raw)
To: linux-arm-kernel
On 05/09/2018 12:22, Ryder Lee wrote:
> Add a jpeg decoder device node for MT7623.
>
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Applied to v4.19-next/dts32
> ---
> arch/arm/boot/dts/mt7623.dtsi | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index a46987b..d01bdee 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -764,6 +764,21 @@
> power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
> };
>
> + jpegdec: jpegdec at 15004000 {
> + compatible = "mediatek,mt7623-jpgdec",
> + "mediatek,mt2701-jpgdec";
> + reg = <0 0x15004000 0 0x1000>;
> + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
> + <&imgsys CLK_IMG_JPGDEC>;
> + clock-names = "jpgdec-smi",
> + "jpgdec";
> + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
> + mediatek,larb = <&larb2>;
> + iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
> + <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
> + };
> +
> vdecsys: syscon at 16000000 {
> compatible = "mediatek,mt7623-vdecsys",
> "mediatek,mt2701-vdecsys",
>
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 5/5] arm: dts: mt7623: add display subsystem related device nodes
2018-09-05 10:22 ` Ryder Lee
(?)
@ 2018-09-05 10:22 ` Ryder Lee
-1 siblings, 0 replies; 23+ messages in thread
From: Ryder Lee @ 2018-09-05 10:22 UTC (permalink / raw)
To: Matthias Brugger
Cc: Sean Wang, Roy Luo, Weijie Gao, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek, Ryder Lee, CK Hu, chunhui dai,
Bibby Hsieh
Add display subsystem related device nodes for MT7623.
Cc: CK Hu <ck.hu@mediatek.com>
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
This patch depends on the series: https://lkml.org/lkml/2018/9/5/223
Hi Matthias,
I know you're working on broken MMSYS - just want to ask whether it's possible
to let the patch to go to your tree (if others are okay with it), and we could
send another fixup one for MT7623 MMSYS later?
---
arch/arm/boot/dts/mt7623.dtsi | 177 ++++++++++++++++++++++++++
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 83 ++++++++++++
arch/arm/boot/dts/mt7623n-rfb-emmc.dts | 83 ++++++++++++
3 files changed, 343 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index d01bdee..c6e1e5b 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -23,6 +23,11 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ rdma0 = &rdma0;
+ rdma1 = &rdma1;
+ };
+
cpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-shared;
@@ -311,6 +316,25 @@
clock-names = "spi", "wrap";
};
+ mipi_tx0: mipi-dphy@10010000 {
+ compatible = "mediatek,mt7623-mipi-tx",
+ "mediatek,mt2701-mipi-tx";
+ reg = <0 0x10010000 0 0x90>;
+ clocks = <&clk26m>;
+ clock-output-names = "mipi_tx0_pll";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ };
+
+ cec: cec@10012000 {
+ compatible = "mediatek,mt7623-cec",
+ "mediatek,mt8173-cec";
+ reg = <0 0x10012000 0 0xbc>;
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_CEC>;
+ status = "disabled";
+ };
+
cir: cir@10013000 {
compatible = "mediatek,mt7623-cir";
reg = <0 0x10013000 0 0x1000>;
@@ -359,6 +383,18 @@
#clock-cells = <1>;
};
+ hdmi_phy: phy@10209100 {
+ compatible = "mediatek,mt7623-hdmi-phy",
+ "mediatek,mt2701-hdmi-phy";
+ reg = <0 0x10209100 0 0x24>;
+ clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+ clock-names = "pll_ref";
+ clock-output-names = "hdmitx_dig_cts";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
rng: rng@1020f000 {
compatible = "mediatek,mt7623-rng";
reg = <0 0x1020f000 0 0x1000>;
@@ -505,6 +541,16 @@
status = "disabled";
};
+ hdmiddc0: i2c@11013000 {
+ compatible = "mediatek,mt7623-hdmi-ddc",
+ "mediatek,mt8173-hdmi-ddc";
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+ reg = <0 0x11013000 0 0x1C>;
+ clocks = <&pericfg CLK_PERI_I2C3>;
+ clock-names = "ddc-i2c";
+ status = "disabled";
+ };
+
thermal: thermal@1100b000 {
#thermal-sensor-cells = <1>;
compatible = "mediatek,mt7623-thermal",
@@ -732,6 +778,84 @@
#clock-cells = <1>;
};
+ display_components: dispsys@14000000 {
+ compatible = "mediatek,mt7623-mmsys",
+ "mediatek,mt2701-mmsys";
+ reg = <0 0x14000000 0 0x1000>;
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
+ ovl@14007000 {
+ compatible = "mediatek,mt7623-disp-ovl",
+ "mediatek,mt2701-disp-ovl";
+ reg = <0 0x14007000 0 0x1000>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_OVL>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
+ mediatek,larb = <&larb0>;
+ };
+
+ rdma0: rdma@14008000 {
+ compatible = "mediatek,mt7623-disp-rdma",
+ "mediatek,mt2701-disp-rdma";
+ reg = <0 0x14008000 0 0x1000>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
+ mediatek,larb = <&larb0>;
+ };
+
+ wdma@14009000 {
+ compatible = "mediatek,mt7623-disp-wdma",
+ "mediatek,mt2701-disp-wdma";
+ reg = <0 0x14009000 0 0x1000>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_WDMA>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
+ mediatek,larb = <&larb0>;
+ };
+
+ bls: bls@1400a000 {
+ compatible = "mediatek,mt7623-disp-pwm",
+ "mediatek,mt2701-disp-pwm";
+ reg = <0 0x1400a000 0 0x1000>;
+ #pwm-cells = <2>;
+ clocks = <&mmsys CLK_MM_MDP_BLS_26M>,
+ <&mmsys CLK_MM_DISP_BLS>;
+ clock-names = "main", "mm";
+ status = "disabled";
+ };
+
+ color@1400b000 {
+ compatible = "mediatek,mt7623-disp-color",
+ "mediatek,mt2701-disp-color";
+ reg = <0 0x1400b000 0 0x1000>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_COLOR>;
+ };
+
+ dsi: dsi@1400c000 {
+ compatible = "mediatek,mt7623-dsi",
+ "mediatek,mt2701-dsi";
+ reg = <0 0x1400c000 0 0x1000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DSI_ENGINE>,
+ <&mmsys CLK_MM_DSI_DIG>,
+ <&mipi_tx0>;
+ clock-names = "engine", "digital", "hs";
+ phys = <&mipi_tx0>;
+ phy-names = "dphy";
+ status = "disabled";
+ };
+
+ mutex: mutex@1400e000 {
+ compatible = "mediatek,mt7623-disp-mutex",
+ "mediatek,mt2701-disp-mutex";
+ reg = <0 0x1400e000 0 0x1000>;
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_MUTEX_32K>;
+ };
+
larb0: larb@14010000 {
compatible = "mediatek,mt7623-smi-larb",
"mediatek,mt2701-smi-larb";
@@ -744,6 +868,16 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
};
+ rdma1: rdma@14012000 {
+ compatible = "mediatek,mt7623-disp-rdma",
+ "mediatek,mt2701-disp-rdma";
+ reg = <0 0x14012000 0 0x1000>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
+ mediatek,larb = <&larb0>;
+ };
+
imgsys: syscon@15000000 {
compatible = "mediatek,mt7623-imgsys",
"mediatek,mt2701-imgsys",
@@ -799,6 +933,34 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
};
+ dpi0: dpi@14014000 {
+ compatible = "mediatek,mt7623-dpi",
+ "mediatek,mt2701-dpi";
+ reg = <0 0x14014000 0 0x1000>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DPI1_DIGL>,
+ <&mmsys CLK_MM_DPI1_ENGINE>,
+ <&topckgen CLK_TOP_TVDPLL>;
+ clock-names = "pixel", "engine", "pll";
+ status = "disabled";
+ };
+
+ hdmi0: hdmi@14015000 {
+ compatible = "mediatek,mt7623-hdmi",
+ "mediatek,mt8173-hdmi";
+ reg = <0 0x14015000 0 0x400>;
+ clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
+ <&mmsys CLK_MM_HDMI_PLL>,
+ <&mmsys CLK_MM_HDMI_AUDIO>,
+ <&mmsys CLK_MM_HDMI_SPDIF>;
+ clock-names = "pixel", "pll", "bclk", "spdif";
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi";
+ mediatek,syscon-hdmi = <&mmsys 0x900>;
+ cec = <&cec>;
+ status = "disabled";
+ };
+
hifsys: syscon@1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
@@ -1071,6 +1233,21 @@
};
};
+ hdmi_pins_a: hdmi-default {
+ pins-hdmi {
+ pinmux = <MT7623_PIN_123_HTPLG_FUNC_HTPLG>;
+ input-enable;
+ bias-pull-down;
+ };
+ };
+
+ hdmi_ddc_pins_a: hdmi_ddc-default {
+ pins-hdmi-ddc {
+ pinmux = <MT7623_PIN_124_GPIO124_FUNC_HDMISCK>,
+ <MT7623_PIN_125_GPIO125_FUNC_HDMISD>;
+ };
+ };
+
i2c0_pins_a: i2c0-default {
pins-i2c0 {
pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 2b760f9..dbce86b 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -21,6 +21,19 @@
stdout-path = "serial2:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+ type = "d";
+ ddc-i2c-bus = <&hdmiddc0>;
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi0_out>;
+ };
+ };
+ };
+
cpus {
cpu@0 {
proc-supply = <&mt6323_vproc_reg>;
@@ -114,10 +127,24 @@
};
};
+&bls {
+ status = "okay";
+
+ port {
+ bls_out: endpoint {
+ remote-endpoint = <&dpi0_in>;
+ };
+ };
+};
+
&btif {
status = "okay";
};
+&cec {
+ status = "okay";
+};
+
&cir {
pinctrl-names = "default";
pinctrl-0 = <&cir_pins_a>;
@@ -128,6 +155,26 @@
status = "okay";
};
+&dpi0 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ dpi0_out: endpoint {
+ remote-endpoint = <&hdmi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpi0_in: endpoint {
+ remote-endpoint = <&bls_out>;
+ };
+ };
+ };
+};
+
ð {
status = "okay";
@@ -199,6 +246,42 @@
};
};
+&hdmi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins_a>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ hdmi0_in: endpoint {
+ remote-endpoint = <&dpi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+};
+
+&hdmiddc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_ddc_pins_a>;
+ status = "okay";
+};
+
+&hdmi_phy {
+ mediatek,ibias = <0xa>;
+ mediatek,ibias_up = <0x1c>;
+ status = "okay";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
index b760613..bdf9010 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -24,6 +24,19 @@
stdout-path = "serial2:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+ type = "d";
+ ddc-i2c-bus = <&hdmiddc0>;
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi0_out>;
+ };
+ };
+ };
+
cpus {
cpu@0 {
proc-supply = <&mt6323_vproc_reg>;
@@ -106,10 +119,24 @@
};
};
+&bls {
+ status = "okay";
+
+ port {
+ bls_out: endpoint {
+ remote-endpoint = <&dpi0_in>;
+ };
+ };
+};
+
&btif {
status = "okay";
};
+&cec {
+ status = "okay";
+};
+
&cir {
pinctrl-names = "default";
pinctrl-0 = <&cir_pins_a>;
@@ -120,6 +147,26 @@
status = "okay";
};
+&dpi0 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ dpi0_out: endpoint {
+ remote-endpoint = <&hdmi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpi0_in: endpoint {
+ remote-endpoint = <&bls_out>;
+ };
+ };
+ };
+};
+
ð {
status = "okay";
@@ -202,6 +249,42 @@
};
};
+&hdmi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins_a>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ hdmi0_in: endpoint {
+ remote-endpoint = <&dpi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+};
+
+&hdmiddc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_ddc_pins_a>;
+ status = "okay";
+};
+
+&hdmi_phy {
+ mediatek,ibias = <0xa>;
+ mediatek,ibias_up = <0x1c>;
+ status = "okay";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
--
1.9.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH 5/5] arm: dts: mt7623: add display subsystem related device nodes
@ 2018-09-05 10:22 ` Ryder Lee
0 siblings, 0 replies; 23+ messages in thread
From: Ryder Lee @ 2018-09-05 10:22 UTC (permalink / raw)
To: linux-arm-kernel
Add display subsystem related device nodes for MT7623.
Cc: CK Hu <ck.hu@mediatek.com>
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
This patch depends on the series: https://lkml.org/lkml/2018/9/5/223
Hi Matthias,
I know you're working on broken MMSYS - just want to ask whether it's possible
to let the patch to go to your tree (if others are okay with it), and we could
send another fixup one for MT7623 MMSYS later?
---
arch/arm/boot/dts/mt7623.dtsi | 177 ++++++++++++++++++++++++++
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 83 ++++++++++++
arch/arm/boot/dts/mt7623n-rfb-emmc.dts | 83 ++++++++++++
3 files changed, 343 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index d01bdee..c6e1e5b 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -23,6 +23,11 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ rdma0 = &rdma0;
+ rdma1 = &rdma1;
+ };
+
cpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-shared;
@@ -311,6 +316,25 @@
clock-names = "spi", "wrap";
};
+ mipi_tx0: mipi-dphy at 10010000 {
+ compatible = "mediatek,mt7623-mipi-tx",
+ "mediatek,mt2701-mipi-tx";
+ reg = <0 0x10010000 0 0x90>;
+ clocks = <&clk26m>;
+ clock-output-names = "mipi_tx0_pll";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ };
+
+ cec: cec at 10012000 {
+ compatible = "mediatek,mt7623-cec",
+ "mediatek,mt8173-cec";
+ reg = <0 0x10012000 0 0xbc>;
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_CEC>;
+ status = "disabled";
+ };
+
cir: cir at 10013000 {
compatible = "mediatek,mt7623-cir";
reg = <0 0x10013000 0 0x1000>;
@@ -359,6 +383,18 @@
#clock-cells = <1>;
};
+ hdmi_phy: phy at 10209100 {
+ compatible = "mediatek,mt7623-hdmi-phy",
+ "mediatek,mt2701-hdmi-phy";
+ reg = <0 0x10209100 0 0x24>;
+ clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+ clock-names = "pll_ref";
+ clock-output-names = "hdmitx_dig_cts";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
rng: rng at 1020f000 {
compatible = "mediatek,mt7623-rng";
reg = <0 0x1020f000 0 0x1000>;
@@ -505,6 +541,16 @@
status = "disabled";
};
+ hdmiddc0: i2c at 11013000 {
+ compatible = "mediatek,mt7623-hdmi-ddc",
+ "mediatek,mt8173-hdmi-ddc";
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+ reg = <0 0x11013000 0 0x1C>;
+ clocks = <&pericfg CLK_PERI_I2C3>;
+ clock-names = "ddc-i2c";
+ status = "disabled";
+ };
+
thermal: thermal at 1100b000 {
#thermal-sensor-cells = <1>;
compatible = "mediatek,mt7623-thermal",
@@ -732,6 +778,84 @@
#clock-cells = <1>;
};
+ display_components: dispsys at 14000000 {
+ compatible = "mediatek,mt7623-mmsys",
+ "mediatek,mt2701-mmsys";
+ reg = <0 0x14000000 0 0x1000>;
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
+ ovl at 14007000 {
+ compatible = "mediatek,mt7623-disp-ovl",
+ "mediatek,mt2701-disp-ovl";
+ reg = <0 0x14007000 0 0x1000>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_OVL>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
+ mediatek,larb = <&larb0>;
+ };
+
+ rdma0: rdma at 14008000 {
+ compatible = "mediatek,mt7623-disp-rdma",
+ "mediatek,mt2701-disp-rdma";
+ reg = <0 0x14008000 0 0x1000>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
+ mediatek,larb = <&larb0>;
+ };
+
+ wdma at 14009000 {
+ compatible = "mediatek,mt7623-disp-wdma",
+ "mediatek,mt2701-disp-wdma";
+ reg = <0 0x14009000 0 0x1000>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_WDMA>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
+ mediatek,larb = <&larb0>;
+ };
+
+ bls: bls at 1400a000 {
+ compatible = "mediatek,mt7623-disp-pwm",
+ "mediatek,mt2701-disp-pwm";
+ reg = <0 0x1400a000 0 0x1000>;
+ #pwm-cells = <2>;
+ clocks = <&mmsys CLK_MM_MDP_BLS_26M>,
+ <&mmsys CLK_MM_DISP_BLS>;
+ clock-names = "main", "mm";
+ status = "disabled";
+ };
+
+ color at 1400b000 {
+ compatible = "mediatek,mt7623-disp-color",
+ "mediatek,mt2701-disp-color";
+ reg = <0 0x1400b000 0 0x1000>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_COLOR>;
+ };
+
+ dsi: dsi at 1400c000 {
+ compatible = "mediatek,mt7623-dsi",
+ "mediatek,mt2701-dsi";
+ reg = <0 0x1400c000 0 0x1000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DSI_ENGINE>,
+ <&mmsys CLK_MM_DSI_DIG>,
+ <&mipi_tx0>;
+ clock-names = "engine", "digital", "hs";
+ phys = <&mipi_tx0>;
+ phy-names = "dphy";
+ status = "disabled";
+ };
+
+ mutex: mutex at 1400e000 {
+ compatible = "mediatek,mt7623-disp-mutex",
+ "mediatek,mt2701-disp-mutex";
+ reg = <0 0x1400e000 0 0x1000>;
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_MUTEX_32K>;
+ };
+
larb0: larb at 14010000 {
compatible = "mediatek,mt7623-smi-larb",
"mediatek,mt2701-smi-larb";
@@ -744,6 +868,16 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
};
+ rdma1: rdma at 14012000 {
+ compatible = "mediatek,mt7623-disp-rdma",
+ "mediatek,mt2701-disp-rdma";
+ reg = <0 0x14012000 0 0x1000>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
+ mediatek,larb = <&larb0>;
+ };
+
imgsys: syscon at 15000000 {
compatible = "mediatek,mt7623-imgsys",
"mediatek,mt2701-imgsys",
@@ -799,6 +933,34 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
};
+ dpi0: dpi at 14014000 {
+ compatible = "mediatek,mt7623-dpi",
+ "mediatek,mt2701-dpi";
+ reg = <0 0x14014000 0 0x1000>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DPI1_DIGL>,
+ <&mmsys CLK_MM_DPI1_ENGINE>,
+ <&topckgen CLK_TOP_TVDPLL>;
+ clock-names = "pixel", "engine", "pll";
+ status = "disabled";
+ };
+
+ hdmi0: hdmi at 14015000 {
+ compatible = "mediatek,mt7623-hdmi",
+ "mediatek,mt8173-hdmi";
+ reg = <0 0x14015000 0 0x400>;
+ clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
+ <&mmsys CLK_MM_HDMI_PLL>,
+ <&mmsys CLK_MM_HDMI_AUDIO>,
+ <&mmsys CLK_MM_HDMI_SPDIF>;
+ clock-names = "pixel", "pll", "bclk", "spdif";
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi";
+ mediatek,syscon-hdmi = <&mmsys 0x900>;
+ cec = <&cec>;
+ status = "disabled";
+ };
+
hifsys: syscon at 1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
@@ -1071,6 +1233,21 @@
};
};
+ hdmi_pins_a: hdmi-default {
+ pins-hdmi {
+ pinmux = <MT7623_PIN_123_HTPLG_FUNC_HTPLG>;
+ input-enable;
+ bias-pull-down;
+ };
+ };
+
+ hdmi_ddc_pins_a: hdmi_ddc-default {
+ pins-hdmi-ddc {
+ pinmux = <MT7623_PIN_124_GPIO124_FUNC_HDMISCK>,
+ <MT7623_PIN_125_GPIO125_FUNC_HDMISD>;
+ };
+ };
+
i2c0_pins_a: i2c0-default {
pins-i2c0 {
pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 2b760f9..dbce86b 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -21,6 +21,19 @@
stdout-path = "serial2:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+ type = "d";
+ ddc-i2c-bus = <&hdmiddc0>;
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi0_out>;
+ };
+ };
+ };
+
cpus {
cpu at 0 {
proc-supply = <&mt6323_vproc_reg>;
@@ -114,10 +127,24 @@
};
};
+&bls {
+ status = "okay";
+
+ port {
+ bls_out: endpoint {
+ remote-endpoint = <&dpi0_in>;
+ };
+ };
+};
+
&btif {
status = "okay";
};
+&cec {
+ status = "okay";
+};
+
&cir {
pinctrl-names = "default";
pinctrl-0 = <&cir_pins_a>;
@@ -128,6 +155,26 @@
status = "okay";
};
+&dpi0 {
+ status = "okay";
+
+ ports {
+ port at 0 {
+ reg = <0>;
+ dpi0_out: endpoint {
+ remote-endpoint = <&hdmi0_in>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ dpi0_in: endpoint {
+ remote-endpoint = <&bls_out>;
+ };
+ };
+ };
+};
+
ð {
status = "okay";
@@ -199,6 +246,42 @@
};
};
+&hdmi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins_a>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port at 0 {
+ reg = <0>;
+ hdmi0_in: endpoint {
+ remote-endpoint = <&dpi0_out>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+};
+
+&hdmiddc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_ddc_pins_a>;
+ status = "okay";
+};
+
+&hdmi_phy {
+ mediatek,ibias = <0xa>;
+ mediatek,ibias_up = <0x1c>;
+ status = "okay";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
index b760613..bdf9010 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -24,6 +24,19 @@
stdout-path = "serial2:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+ type = "d";
+ ddc-i2c-bus = <&hdmiddc0>;
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi0_out>;
+ };
+ };
+ };
+
cpus {
cpu at 0 {
proc-supply = <&mt6323_vproc_reg>;
@@ -106,10 +119,24 @@
};
};
+&bls {
+ status = "okay";
+
+ port {
+ bls_out: endpoint {
+ remote-endpoint = <&dpi0_in>;
+ };
+ };
+};
+
&btif {
status = "okay";
};
+&cec {
+ status = "okay";
+};
+
&cir {
pinctrl-names = "default";
pinctrl-0 = <&cir_pins_a>;
@@ -120,6 +147,26 @@
status = "okay";
};
+&dpi0 {
+ status = "okay";
+
+ ports {
+ port at 0 {
+ reg = <0>;
+ dpi0_out: endpoint {
+ remote-endpoint = <&hdmi0_in>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ dpi0_in: endpoint {
+ remote-endpoint = <&bls_out>;
+ };
+ };
+ };
+};
+
ð {
status = "okay";
@@ -202,6 +249,42 @@
};
};
+&hdmi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins_a>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port at 0 {
+ reg = <0>;
+ hdmi0_in: endpoint {
+ remote-endpoint = <&dpi0_out>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+};
+
+&hdmiddc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_ddc_pins_a>;
+ status = "okay";
+};
+
+&hdmi_phy {
+ mediatek,ibias = <0xa>;
+ mediatek,ibias_up = <0x1c>;
+ status = "okay";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
--
1.9.1
^ permalink raw reply related [flat|nested] 23+ messages in thread* [PATCH 5/5] arm: dts: mt7623: add display subsystem related device nodes
@ 2018-09-05 10:22 ` Ryder Lee
0 siblings, 0 replies; 23+ messages in thread
From: Ryder Lee @ 2018-09-05 10:22 UTC (permalink / raw)
To: Matthias Brugger
Cc: Sean Wang, Roy Luo, Weijie Gao, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek, Ryder Lee, CK Hu, chunhui dai,
Bibby Hsieh
Add display subsystem related device nodes for MT7623.
Cc: CK Hu <ck.hu@mediatek.com>
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
This patch depends on the series: https://lkml.org/lkml/2018/9/5/223
Hi Matthias,
I know you're working on broken MMSYS - just want to ask whether it's possible
to let the patch to go to your tree (if others are okay with it), and we could
send another fixup one for MT7623 MMSYS later?
---
arch/arm/boot/dts/mt7623.dtsi | 177 ++++++++++++++++++++++++++
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 83 ++++++++++++
arch/arm/boot/dts/mt7623n-rfb-emmc.dts | 83 ++++++++++++
3 files changed, 343 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index d01bdee..c6e1e5b 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -23,6 +23,11 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ rdma0 = &rdma0;
+ rdma1 = &rdma1;
+ };
+
cpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-shared;
@@ -311,6 +316,25 @@
clock-names = "spi", "wrap";
};
+ mipi_tx0: mipi-dphy@10010000 {
+ compatible = "mediatek,mt7623-mipi-tx",
+ "mediatek,mt2701-mipi-tx";
+ reg = <0 0x10010000 0 0x90>;
+ clocks = <&clk26m>;
+ clock-output-names = "mipi_tx0_pll";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ };
+
+ cec: cec@10012000 {
+ compatible = "mediatek,mt7623-cec",
+ "mediatek,mt8173-cec";
+ reg = <0 0x10012000 0 0xbc>;
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_CEC>;
+ status = "disabled";
+ };
+
cir: cir@10013000 {
compatible = "mediatek,mt7623-cir";
reg = <0 0x10013000 0 0x1000>;
@@ -359,6 +383,18 @@
#clock-cells = <1>;
};
+ hdmi_phy: phy@10209100 {
+ compatible = "mediatek,mt7623-hdmi-phy",
+ "mediatek,mt2701-hdmi-phy";
+ reg = <0 0x10209100 0 0x24>;
+ clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+ clock-names = "pll_ref";
+ clock-output-names = "hdmitx_dig_cts";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
rng: rng@1020f000 {
compatible = "mediatek,mt7623-rng";
reg = <0 0x1020f000 0 0x1000>;
@@ -505,6 +541,16 @@
status = "disabled";
};
+ hdmiddc0: i2c@11013000 {
+ compatible = "mediatek,mt7623-hdmi-ddc",
+ "mediatek,mt8173-hdmi-ddc";
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+ reg = <0 0x11013000 0 0x1C>;
+ clocks = <&pericfg CLK_PERI_I2C3>;
+ clock-names = "ddc-i2c";
+ status = "disabled";
+ };
+
thermal: thermal@1100b000 {
#thermal-sensor-cells = <1>;
compatible = "mediatek,mt7623-thermal",
@@ -732,6 +778,84 @@
#clock-cells = <1>;
};
+ display_components: dispsys@14000000 {
+ compatible = "mediatek,mt7623-mmsys",
+ "mediatek,mt2701-mmsys";
+ reg = <0 0x14000000 0 0x1000>;
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
+ ovl@14007000 {
+ compatible = "mediatek,mt7623-disp-ovl",
+ "mediatek,mt2701-disp-ovl";
+ reg = <0 0x14007000 0 0x1000>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_OVL>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
+ mediatek,larb = <&larb0>;
+ };
+
+ rdma0: rdma@14008000 {
+ compatible = "mediatek,mt7623-disp-rdma",
+ "mediatek,mt2701-disp-rdma";
+ reg = <0 0x14008000 0 0x1000>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
+ mediatek,larb = <&larb0>;
+ };
+
+ wdma@14009000 {
+ compatible = "mediatek,mt7623-disp-wdma",
+ "mediatek,mt2701-disp-wdma";
+ reg = <0 0x14009000 0 0x1000>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_WDMA>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
+ mediatek,larb = <&larb0>;
+ };
+
+ bls: bls@1400a000 {
+ compatible = "mediatek,mt7623-disp-pwm",
+ "mediatek,mt2701-disp-pwm";
+ reg = <0 0x1400a000 0 0x1000>;
+ #pwm-cells = <2>;
+ clocks = <&mmsys CLK_MM_MDP_BLS_26M>,
+ <&mmsys CLK_MM_DISP_BLS>;
+ clock-names = "main", "mm";
+ status = "disabled";
+ };
+
+ color@1400b000 {
+ compatible = "mediatek,mt7623-disp-color",
+ "mediatek,mt2701-disp-color";
+ reg = <0 0x1400b000 0 0x1000>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_COLOR>;
+ };
+
+ dsi: dsi@1400c000 {
+ compatible = "mediatek,mt7623-dsi",
+ "mediatek,mt2701-dsi";
+ reg = <0 0x1400c000 0 0x1000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DSI_ENGINE>,
+ <&mmsys CLK_MM_DSI_DIG>,
+ <&mipi_tx0>;
+ clock-names = "engine", "digital", "hs";
+ phys = <&mipi_tx0>;
+ phy-names = "dphy";
+ status = "disabled";
+ };
+
+ mutex: mutex@1400e000 {
+ compatible = "mediatek,mt7623-disp-mutex",
+ "mediatek,mt2701-disp-mutex";
+ reg = <0 0x1400e000 0 0x1000>;
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_MUTEX_32K>;
+ };
+
larb0: larb@14010000 {
compatible = "mediatek,mt7623-smi-larb",
"mediatek,mt2701-smi-larb";
@@ -744,6 +868,16 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
};
+ rdma1: rdma@14012000 {
+ compatible = "mediatek,mt7623-disp-rdma",
+ "mediatek,mt2701-disp-rdma";
+ reg = <0 0x14012000 0 0x1000>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
+ mediatek,larb = <&larb0>;
+ };
+
imgsys: syscon@15000000 {
compatible = "mediatek,mt7623-imgsys",
"mediatek,mt2701-imgsys",
@@ -799,6 +933,34 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
};
+ dpi0: dpi@14014000 {
+ compatible = "mediatek,mt7623-dpi",
+ "mediatek,mt2701-dpi";
+ reg = <0 0x14014000 0 0x1000>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DPI1_DIGL>,
+ <&mmsys CLK_MM_DPI1_ENGINE>,
+ <&topckgen CLK_TOP_TVDPLL>;
+ clock-names = "pixel", "engine", "pll";
+ status = "disabled";
+ };
+
+ hdmi0: hdmi@14015000 {
+ compatible = "mediatek,mt7623-hdmi",
+ "mediatek,mt8173-hdmi";
+ reg = <0 0x14015000 0 0x400>;
+ clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
+ <&mmsys CLK_MM_HDMI_PLL>,
+ <&mmsys CLK_MM_HDMI_AUDIO>,
+ <&mmsys CLK_MM_HDMI_SPDIF>;
+ clock-names = "pixel", "pll", "bclk", "spdif";
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi";
+ mediatek,syscon-hdmi = <&mmsys 0x900>;
+ cec = <&cec>;
+ status = "disabled";
+ };
+
hifsys: syscon@1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
@@ -1071,6 +1233,21 @@
};
};
+ hdmi_pins_a: hdmi-default {
+ pins-hdmi {
+ pinmux = <MT7623_PIN_123_HTPLG_FUNC_HTPLG>;
+ input-enable;
+ bias-pull-down;
+ };
+ };
+
+ hdmi_ddc_pins_a: hdmi_ddc-default {
+ pins-hdmi-ddc {
+ pinmux = <MT7623_PIN_124_GPIO124_FUNC_HDMISCK>,
+ <MT7623_PIN_125_GPIO125_FUNC_HDMISD>;
+ };
+ };
+
i2c0_pins_a: i2c0-default {
pins-i2c0 {
pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 2b760f9..dbce86b 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -21,6 +21,19 @@
stdout-path = "serial2:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+ type = "d";
+ ddc-i2c-bus = <&hdmiddc0>;
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi0_out>;
+ };
+ };
+ };
+
cpus {
cpu@0 {
proc-supply = <&mt6323_vproc_reg>;
@@ -114,10 +127,24 @@
};
};
+&bls {
+ status = "okay";
+
+ port {
+ bls_out: endpoint {
+ remote-endpoint = <&dpi0_in>;
+ };
+ };
+};
+
&btif {
status = "okay";
};
+&cec {
+ status = "okay";
+};
+
&cir {
pinctrl-names = "default";
pinctrl-0 = <&cir_pins_a>;
@@ -128,6 +155,26 @@
status = "okay";
};
+&dpi0 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ dpi0_out: endpoint {
+ remote-endpoint = <&hdmi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpi0_in: endpoint {
+ remote-endpoint = <&bls_out>;
+ };
+ };
+ };
+};
+
ð {
status = "okay";
@@ -199,6 +246,42 @@
};
};
+&hdmi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins_a>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ hdmi0_in: endpoint {
+ remote-endpoint = <&dpi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+};
+
+&hdmiddc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_ddc_pins_a>;
+ status = "okay";
+};
+
+&hdmi_phy {
+ mediatek,ibias = <0xa>;
+ mediatek,ibias_up = <0x1c>;
+ status = "okay";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
index b760613..bdf9010 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -24,6 +24,19 @@
stdout-path = "serial2:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+ type = "d";
+ ddc-i2c-bus = <&hdmiddc0>;
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi0_out>;
+ };
+ };
+ };
+
cpus {
cpu@0 {
proc-supply = <&mt6323_vproc_reg>;
@@ -106,10 +119,24 @@
};
};
+&bls {
+ status = "okay";
+
+ port {
+ bls_out: endpoint {
+ remote-endpoint = <&dpi0_in>;
+ };
+ };
+};
+
&btif {
status = "okay";
};
+&cec {
+ status = "okay";
+};
+
&cir {
pinctrl-names = "default";
pinctrl-0 = <&cir_pins_a>;
@@ -120,6 +147,26 @@
status = "okay";
};
+&dpi0 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ dpi0_out: endpoint {
+ remote-endpoint = <&hdmi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpi0_in: endpoint {
+ remote-endpoint = <&bls_out>;
+ };
+ };
+ };
+};
+
ð {
status = "okay";
@@ -202,6 +249,42 @@
};
};
+&hdmi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins_a>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ hdmi0_in: endpoint {
+ remote-endpoint = <&dpi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+};
+
+&hdmiddc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_ddc_pins_a>;
+ status = "okay";
+};
+
+&hdmi_phy {
+ mediatek,ibias = <0xa>;
+ mediatek,ibias_up = <0x1c>;
+ status = "okay";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
--
1.9.1
^ permalink raw reply related [flat|nested] 23+ messages in thread
* Re: [PATCH 1/5] arm: dts: mt7623: add a performance counter unit device node
2018-09-05 10:22 ` Ryder Lee
@ 2018-09-25 15:46 ` Matthias Brugger
-1 siblings, 0 replies; 23+ messages in thread
From: Matthias Brugger @ 2018-09-25 15:46 UTC (permalink / raw)
To: Ryder Lee
Cc: Sean Wang, Roy Luo, Weijie Gao, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek
On 05/09/2018 12:22, Ryder Lee wrote:
> Add ARM PMU device node to enable hardware perf events.
>
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Applied to v4.19-next/dts32
> ---
> arch/arm/boot/dts/mt7623.dtsi | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index 1cdc346..8c43bd0 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -121,6 +121,15 @@
> };
> };
>
> + pmu {
> + compatible = "arm,cortex-a7-pmu";
> + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
> + };
> +
> system_clk: dummy13m {
> compatible = "fixed-clock";
> clock-frequency = <13000000>;
>
^ permalink raw reply [flat|nested] 23+ messages in thread* [PATCH 1/5] arm: dts: mt7623: add a performance counter unit device node
@ 2018-09-25 15:46 ` Matthias Brugger
0 siblings, 0 replies; 23+ messages in thread
From: Matthias Brugger @ 2018-09-25 15:46 UTC (permalink / raw)
To: linux-arm-kernel
On 05/09/2018 12:22, Ryder Lee wrote:
> Add ARM PMU device node to enable hardware perf events.
>
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Applied to v4.19-next/dts32
> ---
> arch/arm/boot/dts/mt7623.dtsi | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index 1cdc346..8c43bd0 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -121,6 +121,15 @@
> };
> };
>
> + pmu {
> + compatible = "arm,cortex-a7-pmu";
> + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
> + };
> +
> system_clk: dummy13m {
> compatible = "fixed-clock";
> clock-frequency = <13000000>;
>
^ permalink raw reply [flat|nested] 23+ messages in thread