* [PATCH 1/5] classes: minor corrections to kernel-fitimage section
2020-12-22 1:05 [PATCH 0/5] fitimage-related changes Paul Eggleton
@ 2020-12-22 1:06 ` Paul Eggleton
2020-12-22 1:06 ` [PATCH 2/5] variables: clarify KERNEL_ALT_IMAGETYPE reference Paul Eggleton
` (4 subsequent siblings)
5 siblings, 0 replies; 11+ messages in thread
From: Paul Eggleton @ 2020-12-22 1:06 UTC (permalink / raw)
To: docs
From: Paul Eggleton <paul.eggleton@microsoft.com>
Minor syntax and formatting corrections.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
---
documentation/ref-manual/classes.rst | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/documentation/ref-manual/classes.rst b/documentation/ref-manual/classes.rst
index 5a30ce3..08ced7f 100644
--- a/documentation/ref-manual/classes.rst
+++ b/documentation/ref-manual/classes.rst
@@ -1374,18 +1374,18 @@ generation.
``kernel-fitimage.bbclass``
===========================
-The ``kernel-fitimage`` class provides support to pack a kernel Image,
+The ``kernel-fitimage`` class provides support to pack a kernel image,
device trees and a RAM disk into a single FIT image. In theory, a FIT
-image can support any number of kernels, RAM disks and device-trees.
+image can support any number of kernels, RAM disks and device trees.
However, ``kernel-fitimage`` currently only supports
limited usescases: just one kernel image, an optional RAM disk, and
-any number of device tree.
+any number of device trees.
To create a FIT image, it is required that :term:`KERNEL_CLASSES`
-is set to "kernel-fitimage" and :term:`KERNEL_IMAGETYPE`
+is set to include "kernel-fitimage" and :term:`KERNEL_IMAGETYPE`
is set to "fitImage".
-The options for the device tree compiler passed to mkimage -D feature
+The options for the device tree compiler passed to ``mkimage -D``
when creating the FIT image are specified using the
:term:`UBOOT_MKIMAGE_DTCOPTS` variable.
--
1.8.3.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH 2/5] variables: clarify KERNEL_ALT_IMAGETYPE reference
2020-12-22 1:05 [PATCH 0/5] fitimage-related changes Paul Eggleton
2020-12-22 1:06 ` [PATCH 1/5] classes: minor corrections to kernel-fitimage section Paul Eggleton
@ 2020-12-22 1:06 ` Paul Eggleton
2020-12-22 1:06 ` [PATCH 3/5] variables: explicitly state that UBOOT_MKIMAGE_DTCOPTS is optional Paul Eggleton
` (3 subsequent siblings)
5 siblings, 0 replies; 11+ messages in thread
From: Paul Eggleton @ 2020-12-22 1:06 UTC (permalink / raw)
To: docs
From: Paul Eggleton <paul.eggleton@microsoft.com>
Make it clear that KERNEL_ALT_IMAGETYPE is intended to allow building an
additional image type.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
---
documentation/ref-manual/variables.rst | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/documentation/ref-manual/variables.rst b/documentation/ref-manual/variables.rst
index 8c6cc46..4508bb1 100644
--- a/documentation/ref-manual/variables.rst
+++ b/documentation/ref-manual/variables.rst
@@ -3983,8 +3983,9 @@ system and gives an overview of their function and contents.
when building the kernel and is passed to ``make`` as the target to
build.
- If you want to build an alternate kernel image type, use the
- :term:`KERNEL_ALT_IMAGETYPE` variable.
+ If you want to build an alternate kernel image type in addition to that
+ specified by ``KERNEL_IMAGETYPE``, use the :term:`KERNEL_ALT_IMAGETYPE`
+ variable.
:term:`KERNEL_MODULE_AUTOLOAD`
Lists kernel modules that need to be auto-loaded during boot.
--
1.8.3.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH 3/5] variables: explicitly state that UBOOT_MKIMAGE_DTCOPTS is optional
2020-12-22 1:05 [PATCH 0/5] fitimage-related changes Paul Eggleton
2020-12-22 1:06 ` [PATCH 1/5] classes: minor corrections to kernel-fitimage section Paul Eggleton
2020-12-22 1:06 ` [PATCH 2/5] variables: clarify KERNEL_ALT_IMAGETYPE reference Paul Eggleton
@ 2020-12-22 1:06 ` Paul Eggleton
2020-12-22 1:06 ` [PATCH 4/5] variables: Add documentation for new kernel-fitimage vars Paul Eggleton
` (2 subsequent siblings)
5 siblings, 0 replies; 11+ messages in thread
From: Paul Eggleton @ 2020-12-22 1:06 UTC (permalink / raw)
To: docs
From: Paul Eggleton <paul.eggleton@microsoft.com>
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
---
documentation/ref-manual/variables.rst | 2 ++
1 file changed, 2 insertions(+)
diff --git a/documentation/ref-manual/variables.rst b/documentation/ref-manual/variables.rst
index 4508bb1..8f7f86e 100644
--- a/documentation/ref-manual/variables.rst
+++ b/documentation/ref-manual/variables.rst
@@ -8444,6 +8444,8 @@ system and gives an overview of their function and contents.
:term:`UBOOT_MKIMAGE_DTCOPTS`
Options for the device tree compiler passed to mkimage '-D'
feature while creating FIT image in :ref:`kernel-fitimage <ref-classes-kernel-fitimage>` class.
+ If ``UBOOT_MKIMAGE_DTCOPTS`` is not set then kernel-fitimage will not
+ pass the ``-D`` option to mkimage.
:term:`UBOOT_RD_ENTRYPOINT`
Specifies the entrypoint for the RAM disk image.
--
1.8.3.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH 4/5] variables: Add documentation for new kernel-fitimage vars
2020-12-22 1:05 [PATCH 0/5] fitimage-related changes Paul Eggleton
` (2 preceding siblings ...)
2020-12-22 1:06 ` [PATCH 3/5] variables: explicitly state that UBOOT_MKIMAGE_DTCOPTS is optional Paul Eggleton
@ 2020-12-22 1:06 ` Paul Eggleton
2020-12-22 9:39 ` [docs] " Quentin Schulz
2020-12-22 1:06 ` [PATCH 5/5] ref-manual: use consistent capitalisation of U-Boot Paul Eggleton
2020-12-22 9:41 ` [docs] [PATCH 0/5] fitimage-related changes Quentin Schulz
5 siblings, 1 reply; 11+ messages in thread
From: Paul Eggleton @ 2020-12-22 1:06 UTC (permalink / raw)
To: docs
From: Paul Eggleton <paul.eggleton@microsoft.com>
Add documentation for FIT_DESC, FIT_SIGN_INDIVIDUAL, UBOOT_MKIMAGE,
UBOOT_MKIMAGE_SIGN and UBOOT_MKIMAGE_SIGN_ARGS.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
---
documentation/ref-manual/variables.rst | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/documentation/ref-manual/variables.rst b/documentation/ref-manual/variables.rst
index 8f7f86e..607ebfe 100644
--- a/documentation/ref-manual/variables.rst
+++ b/documentation/ref-manual/variables.rst
@@ -2538,6 +2538,14 @@ system and gives an overview of their function and contents.
For guidance on how to create your own file permissions settings
table file, examine the existing ``fs-perms.txt``.
+ :term:`FIT_DESC`
+ Specifies the description string encoded into a fitImage. The default
+ value is set by the :ref:`kernel-fitimage <ref-classes-kernel-fitimage>`
+ class as follows:
+ ::
+
+ FIT_DESC ?= "U-Boot fitImage for ${DISTRO_NAME}/${PV}/${MACHINE}"
+
:term:`FIT_GENERATE_KEYS`
Decides whether to generate the keys for signing fitImage if they
don't already exist. The keys are created in ``UBOOT_SIGN_KEYDIR``.
@@ -2568,6 +2576,13 @@ system and gives an overview of their function and contents.
Size of private key in number of bits used in fitImage. The default
value is "2048".
+ :term:`FIT_SIGN_INDIVIDUAL`
+ If set to "1", then the :ref:`kernel-fitimage <ref-classes-kernel-fitimage>`
+ class will sign the kernel, dtb and ramdisk images individually in addition
+ to signing the fitImage itself. This could be useful if you are
+ intending to verify signatures in another context than booting via
+ U-Boot.
+
:term:`FONT_EXTRA_RDEPENDS`
When inheriting the :ref:`fontcache <ref-classes-fontcache>` class,
this variable specifies the runtime dependencies for font packages.
@@ -8441,12 +8456,30 @@ system and gives an overview of their function and contents.
Specifies the target called in the ``Makefile``. The default target
is "all".
+ :term:`UBOOT_MKIMAGE`
+ Specifies the name of the mkimage command as used by the
+ :ref:`kernel-fitimage <ref-classes-kernel-fitimage>` class to assemble
+ the FIT image. This can be used to substitute an alternative command, wrapper
+ script or function if desired. The default is "uboot-mkimage".
+
:term:`UBOOT_MKIMAGE_DTCOPTS`
Options for the device tree compiler passed to mkimage '-D'
feature while creating FIT image in :ref:`kernel-fitimage <ref-classes-kernel-fitimage>` class.
If ``UBOOT_MKIMAGE_DTCOPTS`` is not set then kernel-fitimage will not
pass the ``-D`` option to mkimage.
+ :term:`UBOOT_MKIMAGE_SIGN`
+ Specifies the name of the mkimage command as used by the
+ :ref:`kernel-fitimage <ref-classes-kernel-fitimage>` class to sign
+ the FIT image after it has been assembled (if enabled). This can be used
+ to substitute an alternative command, wrapper script or function if
+ desired. The default is "${:term:`UBOOT_MKIMAGE`}".
+
+ :term:`UBOOT_MKIMAGE_SIGN_ARGS`
+ Optionally specifies additional arguments for the
+ :ref:`kernel-fitimage <ref-classes-kernel-fitimage>` class to pass to the
+ mkimage command when signing the FIT image.
+
:term:`UBOOT_RD_ENTRYPOINT`
Specifies the entrypoint for the RAM disk image.
During FIT image creation, the
--
1.8.3.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [docs] [PATCH 4/5] variables: Add documentation for new kernel-fitimage vars
2020-12-22 1:06 ` [PATCH 4/5] variables: Add documentation for new kernel-fitimage vars Paul Eggleton
@ 2020-12-22 9:39 ` Quentin Schulz
2020-12-22 11:40 ` Nicolas Dechesne
0 siblings, 1 reply; 11+ messages in thread
From: Quentin Schulz @ 2020-12-22 9:39 UTC (permalink / raw)
To: Paul Eggleton; +Cc: docs
Hi Paul,
On Mon, Dec 21, 2020 at 05:06:03PM -0800, Paul Eggleton wrote:
> From: Paul Eggleton <paul.eggleton@microsoft.com>
>
> Add documentation for FIT_DESC, FIT_SIGN_INDIVIDUAL, UBOOT_MKIMAGE,
> UBOOT_MKIMAGE_SIGN and UBOOT_MKIMAGE_SIGN_ARGS.
>
> Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
> ---
> documentation/ref-manual/variables.rst | 33 +++++++++++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/documentation/ref-manual/variables.rst b/documentation/ref-manual/variables.rst
> index 8f7f86e..607ebfe 100644
> --- a/documentation/ref-manual/variables.rst
> +++ b/documentation/ref-manual/variables.rst
> @@ -2538,6 +2538,14 @@ system and gives an overview of their function and contents.
> For guidance on how to create your own file permissions settings
> table file, examine the existing ``fs-perms.txt``.
>
> + :term:`FIT_DESC`
> + Specifies the description string encoded into a fitImage. The default
> + value is set by the :ref:`kernel-fitimage <ref-classes-kernel-fitimage>`
> + class as follows:
> + ::
The two lines above have the same outcome as:
class as follows::
IIRC. I don't remember if a patch was sent by Robert recently nor if it
was merged (does not seem so?) but we strive for consistency on this one
by having all :\n:: migrated to :: at the end of a paragraph.
c.f.: https://lists.yoctoproject.org/g/docs/message/557
Thanks,
Quentin
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [docs] [PATCH 4/5] variables: Add documentation for new kernel-fitimage vars
2020-12-22 9:39 ` [docs] " Quentin Schulz
@ 2020-12-22 11:40 ` Nicolas Dechesne
2020-12-22 11:42 ` Robert P. J. Day
0 siblings, 1 reply; 11+ messages in thread
From: Nicolas Dechesne @ 2020-12-22 11:40 UTC (permalink / raw)
To: Quentin Schulz; +Cc: Paul Eggleton, YP docs mailing list
On Tue, Dec 22, 2020 at 10:39 AM Quentin Schulz
<quentin.schulz@streamunlimited.com> wrote:
>
> Hi Paul,
>
> On Mon, Dec 21, 2020 at 05:06:03PM -0800, Paul Eggleton wrote:
> > From: Paul Eggleton <paul.eggleton@microsoft.com>
> >
> > Add documentation for FIT_DESC, FIT_SIGN_INDIVIDUAL, UBOOT_MKIMAGE,
> > UBOOT_MKIMAGE_SIGN and UBOOT_MKIMAGE_SIGN_ARGS.
> >
> > Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
> > ---
> > documentation/ref-manual/variables.rst | 33 +++++++++++++++++++++++++++++++++
> > 1 file changed, 33 insertions(+)
> >
> > diff --git a/documentation/ref-manual/variables.rst b/documentation/ref-manual/variables.rst
> > index 8f7f86e..607ebfe 100644
> > --- a/documentation/ref-manual/variables.rst
> > +++ b/documentation/ref-manual/variables.rst
> > @@ -2538,6 +2538,14 @@ system and gives an overview of their function and contents.
> > For guidance on how to create your own file permissions settings
> > table file, examine the existing ``fs-perms.txt``.
> >
> > + :term:`FIT_DESC`
> > + Specifies the description string encoded into a fitImage. The default
> > + value is set by the :ref:`kernel-fitimage <ref-classes-kernel-fitimage>`
> > + class as follows:
> > + ::
>
> The two lines above have the same outcome as:
>
> class as follows::
>
> IIRC. I don't remember if a patch was sent by Robert recently nor if it
> was merged (does not seem so?) but we strive for consistency on this one
> by having all :\n:: migrated to :: at the end of a paragraph.
>
> c.f.: https://lists.yoctoproject.org/g/docs/message/557
We agreed to do it, I haven't seen any updates/response on that
thread. So as of now, it's not done..
As such, I don't think it's blocking for new patches.
>
> Thanks,
> Quentin
>
>
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [docs] [PATCH 4/5] variables: Add documentation for new kernel-fitimage vars
2020-12-22 11:40 ` Nicolas Dechesne
@ 2020-12-22 11:42 ` Robert P. J. Day
0 siblings, 0 replies; 11+ messages in thread
From: Robert P. J. Day @ 2020-12-22 11:42 UTC (permalink / raw)
To: Nicolas Dechesne; +Cc: Quentin Schulz, Paul Eggleton, YP docs mailing list
On Tue, 22 Dec 2020, Nicolas Dechesne wrote:
> On Tue, Dec 22, 2020 at 10:39 AM Quentin Schulz
> <quentin.schulz@streamunlimited.com> wrote:
> >
> > Hi Paul,
> >
> > On Mon, Dec 21, 2020 at 05:06:03PM -0800, Paul Eggleton wrote:
> > > From: Paul Eggleton <paul.eggleton@microsoft.com>
> > >
> > > Add documentation for FIT_DESC, FIT_SIGN_INDIVIDUAL, UBOOT_MKIMAGE,
> > > UBOOT_MKIMAGE_SIGN and UBOOT_MKIMAGE_SIGN_ARGS.
> > >
> > > Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
> > > ---
> > > documentation/ref-manual/variables.rst | 33 +++++++++++++++++++++++++++++++++
> > > 1 file changed, 33 insertions(+)
> > >
> > > diff --git a/documentation/ref-manual/variables.rst b/documentation/ref-manual/variables.rst
> > > index 8f7f86e..607ebfe 100644
> > > --- a/documentation/ref-manual/variables.rst
> > > +++ b/documentation/ref-manual/variables.rst
> > > @@ -2538,6 +2538,14 @@ system and gives an overview of their function and contents.
> > > For guidance on how to create your own file permissions settings
> > > table file, examine the existing ``fs-perms.txt``.
> > >
> > > + :term:`FIT_DESC`
> > > + Specifies the description string encoded into a fitImage. The default
> > > + value is set by the :ref:`kernel-fitimage <ref-classes-kernel-fitimage>`
> > > + class as follows:
> > > + ::
> >
> > The two lines above have the same outcome as:
> >
> > class as follows::
> >
> > IIRC. I don't remember if a patch was sent by Robert recently nor if it
> > was merged (does not seem so?) but we strive for consistency on this one
> > by having all :\n:: migrated to :: at the end of a paragraph.
> >
> > c.f.: https://lists.yoctoproject.org/g/docs/message/557
>
> We agreed to do it, I haven't seen any updates/response on that
> thread. So as of now, it's not done..
> As such, I don't think it's blocking for new patches.
apologies ... i've been swamped with my current contract. here's
hoping i get some free time over the holidays.
rday
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 5/5] ref-manual: use consistent capitalisation of U-Boot
2020-12-22 1:05 [PATCH 0/5] fitimage-related changes Paul Eggleton
` (3 preceding siblings ...)
2020-12-22 1:06 ` [PATCH 4/5] variables: Add documentation for new kernel-fitimage vars Paul Eggleton
@ 2020-12-22 1:06 ` Paul Eggleton
2020-12-22 9:41 ` [docs] [PATCH 0/5] fitimage-related changes Quentin Schulz
5 siblings, 0 replies; 11+ messages in thread
From: Paul Eggleton @ 2020-12-22 1:06 UTC (permalink / raw)
To: docs
From: Paul Eggleton <paul.eggleton@microsoft.com>
Change all instances of U-boot to U-Boot.
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
---
documentation/ref-manual/classes.rst | 6 +++---
documentation/ref-manual/migration-1.7.rst | 2 +-
documentation/ref-manual/variables.rst | 8 ++++----
3 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/documentation/ref-manual/classes.rst b/documentation/ref-manual/classes.rst
index 08ced7f..d049ca7 100644
--- a/documentation/ref-manual/classes.rst
+++ b/documentation/ref-manual/classes.rst
@@ -1391,19 +1391,19 @@ when creating the FIT image are specified using the
Only a single kernel can be added to the FIT image created by
``kernel-fitimage`` and the kernel image in FIT is mandatory. The
-address where the kernel image is to be loaded by U-boot is
+address where the kernel image is to be loaded by U-Boot is
specified by :term:`UBOOT_LOADADDRESS` and the entrypoint by
:term:`UBOOT_ENTRYPOINT`.
Multiple device trees can be added to the FIT image created by
``kernel-fitimage`` and the device tree is optional.
-The address where the device tree is to be loaded by U-boot is
+The address where the device tree is to be loaded by U-Boot is
specified by :term:`UBOOT_DTBO_LOADADDRESS` for device tree overlays
and by :term:`UBOOT_DTB_LOADADDRESS` for device tree binaries.
Only a single RAM disk can be added to the FIT image created by
``kernel-fitimage`` and the RAM disk in FIT is optional.
-The address where the RAM disk image is to be loaded by U-boot
+The address where the RAM disk image is to be loaded by U-Boot
is specified by :term:`UBOOT_RD_LOADADDRESS` and the entrypoint by
:term:`UBOOT_RD_ENTRYPOINT`. The ramdisk is added to FIT image when
:term:`INITRAMFS_IMAGE` is specified.
diff --git a/documentation/ref-manual/migration-1.7.rst b/documentation/ref-manual/migration-1.7.rst
index 19275b3..54544e4 100644
--- a/documentation/ref-manual/migration-1.7.rst
+++ b/documentation/ref-manual/migration-1.7.rst
@@ -190,7 +190,7 @@ Removed Recipes
The following recipes have been removed:
-- ``x-load``: This recipe has been superseded by U-boot SPL for all
+- ``x-load``: This recipe has been superseded by U-Boot SPL for all
Cortex-based TI SoCs. For legacy boards, the ``meta-ti`` layer, which
contains a maintained recipe, should be used instead.
diff --git a/documentation/ref-manual/variables.rst b/documentation/ref-manual/variables.rst
index 607ebfe..330f7dd 100644
--- a/documentation/ref-manual/variables.rst
+++ b/documentation/ref-manual/variables.rst
@@ -8405,21 +8405,21 @@ system and gives an overview of their function and contents.
In this example, "sd" is selected as the configuration of the possible four for the
``UBOOT_MACHINE``. The "sd" configuration defines
"mx6qsabreauto_config" as the value for ``UBOOT_MACHINE``, while the
- "sdcard" specifies the ``IMAGE_FSTYPES`` to use for the U-boot image.
+ "sdcard" specifies the ``IMAGE_FSTYPES`` to use for the U-Boot image.
For more information on how the ``UBOOT_CONFIG`` is handled, see the
:ref:`uboot-config <ref-classes-uboot-config>`
class.
:term:`UBOOT_DTB_LOADADDRESS`
- Specifies the load address for the dtb image used by U-boot. During FIT
+ Specifies the load address for the dtb image used by U-Boot. During FIT
image creation, the ``UBOOT_DTB_LOADADDRESS`` variable is used in
:ref:`kernel-fitimage <ref-classes-kernel-fitimage>` class to specify
the load address to be used in
creating the dtb sections of Image Tree Source for the FIT image.
:term:`UBOOT_DTBO_LOADADDRESS`
- Specifies the load address for the dtbo image used by U-boot. During FIT
+ Specifies the load address for the dtbo image used by U-Boot. During FIT
image creation, the ``UBOOT_DTBO_LOADADDRESS`` variable is used in
:ref:`kernel-fitimage <ref-classes-kernel-fitimage>` class to specify the load address to be used in
creating the dtbo sections of Image Tree Source for the FIT image.
@@ -8504,7 +8504,7 @@ system and gives an overview of their function and contents.
certificate used for signing FIT image.
:term:`UBOOT_SIGN_KEYNAME`
- The name of keys used for signing U-boot FIT image stored in
+ The name of keys used for signing U-Boot FIT image stored in
:term:`UBOOT_SIGN_KEYDIR` directory. For e.g. dev.key key and dev.crt
certificate stored in :term:`UBOOT_SIGN_KEYDIR` directory will have
:term:`UBOOT_SIGN_KEYNAME` set to "dev".
--
1.8.3.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [docs] [PATCH 0/5] fitimage-related changes
2020-12-22 1:05 [PATCH 0/5] fitimage-related changes Paul Eggleton
` (4 preceding siblings ...)
2020-12-22 1:06 ` [PATCH 5/5] ref-manual: use consistent capitalisation of U-Boot Paul Eggleton
@ 2020-12-22 9:41 ` Quentin Schulz
2020-12-22 10:00 ` Richard Purdie
5 siblings, 1 reply; 11+ messages in thread
From: Quentin Schulz @ 2020-12-22 9:41 UTC (permalink / raw)
To: Paul Eggleton; +Cc: docs
Hi Paul,
On Mon, Dec 21, 2020 at 05:05:59PM -0800, Paul Eggleton wrote:
> Doc changes corresponding to patches for kernel-fitimage class that were
> recently merged to master, as well as some related tweaks.
>
>
> The following changes since commit b268b1b190861cb203fa642e57794acb402280a7:
>
> releases: conf: add link to 3.2.1, update to include 3.2.1 (2020-12-15 10:59:41 -0800)
>
> are available in the git repository at:
>
> git://git.yoctoproject.org/poky-contrib paule/fitimage-docs
> http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=paule/fitimage-docs
>
> Paul Eggleton (5):
> classes: minor corrections to kernel-fitimage section
> variables: clarify KERNEL_ALT_IMAGETYPE reference
> variables: explicitly state that UBOOT_MKIMAGE_DTCOPTS is optional
> variables: Add documentation for new kernel-fitimage vars
Except for the small :\n:: issue in this one ^:
Reviewed-by: Quentin Schulz <quentin.schulz@streamunlimited.com>
Thanks!
Quentin
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [docs] [PATCH 0/5] fitimage-related changes
2020-12-22 9:41 ` [docs] [PATCH 0/5] fitimage-related changes Quentin Schulz
@ 2020-12-22 10:00 ` Richard Purdie
0 siblings, 0 replies; 11+ messages in thread
From: Richard Purdie @ 2020-12-22 10:00 UTC (permalink / raw)
To: Quentin Schulz, Paul Eggleton; +Cc: docs
On Tue, 2020-12-22 at 10:41 +0100, Quentin Schulz wrote:
> Hi Paul,
>
> On Mon, Dec 21, 2020 at 05:05:59PM -0800, Paul Eggleton wrote:
> > Doc changes corresponding to patches for kernel-fitimage class that
> > were
> > recently merged to master, as well as some related tweaks.
> >
> >
> > The following changes since commit
> > b268b1b190861cb203fa642e57794acb402280a7:
> >
> > releases: conf: add link to 3.2.1, update to include 3.2.1 (2020-
> > 12-15 10:59:41 -0800)
> >
> > are available in the git repository at:
> >
> > git://git.yoctoproject.org/poky-contrib paule/fitimage-docs
> >
> > http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=paule/fitimage-docs
> >
> > Paul Eggleton (5):
> > classes: minor corrections to kernel-fitimage section
> > variables: clarify KERNEL_ALT_IMAGETYPE reference
> > variables: explicitly state that UBOOT_MKIMAGE_DTCOPTS is
> > optional
> > variables: Add documentation for new kernel-fitimage vars
>
> Except for the small :\n:: issue in this one ^:
I tweaked that as I queued the patches on master-next...
Cheers,
Richard
^ permalink raw reply [flat|nested] 11+ messages in thread