* [PATCH] Added double quotes aound variables in bitbake/source to prevent gobbling or splitting
@ 2022-04-05 18:29 Abongwa Bonalais Amahnui
2022-04-05 19:34 ` [bitbake-devel] " Richard Purdie
2022-04-05 20:44 ` [bitbake-devel] " Peter Kjellerstedt
0 siblings, 2 replies; 7+ messages in thread
From: Abongwa Bonalais Amahnui @ 2022-04-05 18:29 UTC (permalink / raw)
To: bitbake-devel; +Cc: Abongwa Bonalais Amahnui
Signed-off-by: Abongwa Bonalais Amahnui <abongwabonalais@gmail.com>
---
bitbake/bin/toaster | 65 +++++++++++++++++++++++----------------------
1 file changed, 33 insertions(+), 32 deletions(-)
diff --git a/bitbake/bin/toaster b/bitbake/bin/toaster
index 558a819570..d98c4c69f0 100755
--- a/bitbake/bin/toaster
+++ b/bitbake/bin/toaster
@@ -1,4 +1,5 @@
-#!/bin/echo ERROR: This script needs to be sourced. Please run as .
+#!/bin/sh
+echo ERROR: This script needs to be sourced. Please run as .
# toaster - shell script to start Toaster
@@ -20,8 +21,8 @@ Usage 2: source toaster manage [createsuperuser|lsupdates|migrate|makemigrations
custom_extention()
{
custom_extension=$BBBASEDIR/lib/toaster/orm/fixtures/custom_toaster_append.sh
- if [ -f $custom_extension ] ; then
- $custom_extension $*
+ if [ -f "$custom_extension" ] ; then
+ $custom_extension "$*"
fi
}
@@ -51,19 +52,19 @@ databaseCheck()
webserverKillAll()
{
local pidfile
- if [ -f ${BUILDDIR}/.toastermain.pid ] ; then
+ if [ -f "${BUILDDIR}"/.toastermain.pid ] ; then
custom_extention web_stop_postpend
else
custom_extention noweb_stop_postpend
fi
- for pidfile in ${BUILDDIR}/.toastermain.pid ${BUILDDIR}/.runbuilds.pid; do
- if [ -f ${pidfile} ]; then
- pid=`cat ${pidfile}`
- while kill -0 $pid 2>/dev/null; do
- kill -SIGTERM $pid 2>/dev/null
+ for pidfile in "${BUILDDIR}"/.toastermain.pid "${BUILDDIR}"/.runbuilds.pid; do
+ if [ -f "${pidfile}" ]; then
+ pid=`cat "${pidfile}"`
+ while kill -0 "$pid" 2>/dev/null; do
+ kill -SIGTERM "$pid" 2>/dev/null
sleep 1
done
- rm ${pidfile}
+ rm "${pidfile}"
fi
done
}
@@ -84,8 +85,8 @@ webserverStartAll()
echo "Starting webserver..."
$MANAGE runserver --noreload "$ADDR_PORT" \
- </dev/null >>${BUILDDIR}/toaster_web.log 2>&1 \
- & echo $! >${BUILDDIR}/.toastermain.pid
+ </dev/null >>"${BUILDDIR}"/toaster_web.log 2>&1 \
+ & echo "$!" >"${BUILDDIR}"/.toastermain.pid
sleep 1
@@ -95,7 +96,7 @@ webserverStartAll()
else
echo "Toaster development webserver started at http://$ADDR_PORT"
echo -e "\nYou can now run 'bitbake <target>' on the command line and monitor your build in Toaster.\nYou can also use a Toaster project to configure and run a build.\n"
- custom_extention web_start_postpend $ADDR_PORT
+ custom_extention web_start_postpend "$ADDR_PORT"
fi
return $retval
@@ -131,8 +132,8 @@ verify_prereq() {
exp=$exp'vmax=["%02d" % int(n) for n in "\4".split(".")];'
exp=$exp'sys.exit(not (version \1 vmin and version \3 vmax))'
exp=$exp'/p'
- if ! sed -n "$exp" $reqfile | python3 - ; then
- req=`grep ^Django $reqfile`
+ if ! sed -n "$exp" "$reqfile" | python3 - ; then
+ req=`grep ^Django "$reqfile"`
echo "This program needs $req"
echo "Please install with pip3 install -r $reqfile"
return 2
@@ -150,10 +151,10 @@ else
TOASTER=$0
fi
-export BBBASEDIR=`dirname $TOASTER`/..
+export BBBASEDIR=`dirname "$TOASTER"`/..
MANAGE="python3 $BBBASEDIR/lib/toaster/manage.py"
if [ -z "$OE_ROOT" ]; then
- OE_ROOT=`dirname $TOASTER`/../..
+ OE_ROOT=`dirname "$TOASTER"`/../..
fi
# this is the configuraton file we are using for toaster
@@ -164,7 +165,7 @@ fi
# in the local layers that currently make using an arbitrary
# toasterconf.json difficult.
-. $OE_ROOT/.templateconf
+. "$OE_ROOT"/.templateconf
if [ -n "$TEMPLATECONF" ]; then
if [ ! -d "$TEMPLATECONF" ]; then
# Allow TEMPLATECONF=meta-xyz/conf as a shortcut
@@ -199,10 +200,10 @@ for param in $*; do
webport=*)
ADDR_PORT="${param#*=}"
# Split the addr:port string
- ADDR=`echo $ADDR_PORT | cut -f 1 -d ':'`
- PORT=`echo $ADDR_PORT | cut -f 2 -d ':'`
+ ADDR=`echo "$ADDR_PORT" | cut -f 1 -d ':'`
+ PORT=`echo "$ADDR_PORT" | cut -f 2 -d ':'`
# If only a port has been speified then set address to localhost.
- if [ $ADDR = $PORT ] ; then
+ if [ "$ADDR" = "$PORT" ] ; then
ADDR_PORT="localhost:$PORT"
fi
;;
@@ -229,7 +230,7 @@ for param in $*; do
esac
done
-if [ `basename \"$0\"` = `basename \"${TOASTER}\"` ]; then
+if [ `basename \""$0"\"` = `basename \""${TOASTER}"\"` ]; then
echo "Error: This script needs to be sourced. Please run as . $TOASTER"
return 1
fi
@@ -265,7 +266,7 @@ fi
echo "The system will $CMD."
# Execute the commands
-custom_extention toaster_prepend $CMD $ADDR_PORT
+custom_extention toaster_prepend "$CMD" "$ADDR_PORT"
case $CMD in
start )
@@ -279,7 +280,7 @@ case $CMD in
# Create configuration file
conf=${BUILDDIR}/conf/local.conf
line='INHERIT+="toaster buildhistory"'
- grep -q "$line" $conf || echo $line >> $conf
+ grep -q "$line" "$conf" || echo "$line" >> "$conf"
if [ $WEBSERVER -eq 0 ] ; then
# Do not update the database for "noweb" unless
@@ -290,17 +291,17 @@ case $CMD in
return 4
fi
fi
- custom_extention noweb_start_postpend $ADDR_PORT
+ custom_extention noweb_start_postpend "$ADDR_PORT"
fi
- if [ $WEBSERVER -gt 0 ] && ! webserverStartAll; then
+ if [ "$WEBSERVER" -gt 0 ] && ! webserverStartAll; then
echo "Failed ${CMD}."
return 4
fi
export BITBAKE_UI='toasterui'
if [ $TOASTER_BUILDSERVER -eq 1 ] ; then
$MANAGE runbuilds \
- </dev/null >>${BUILDDIR}/toaster_runbuilds.log 2>&1 \
- & echo $! >${BUILDDIR}/.runbuilds.pid
+ </dev/null >>"${BUILDDIR}"/toaster_runbuilds.log 2>&1 \
+ & echo $! >"${BUILDDIR}"/.runbuilds.pid
else
echo "Toaster build server not started."
fi
@@ -308,7 +309,7 @@ case $CMD in
# set fail safe stop system on terminal exit
trap stop_system SIGHUP
echo "Successful ${CMD}."
- custom_extention toaster_postpend $CMD $ADDR_PORT
+ custom_extention toaster_postpend "$CMD" "$ADDR_PORT"
return 0
;;
stop )
@@ -316,9 +317,9 @@ case $CMD in
echo "Successful ${CMD}."
;;
manage )
- cd $BBBASEDIR/lib/toaster
- $MANAGE $manage_cmd
+ cd "$BBBASEDIR"/lib/toaster
+ "$MANAGE $manage_cmd"
;;
esac
-custom_extention toaster_postpend $CMD $ADDR_PORT
+custom_extention toaster_postpend "$CMD" "$ADDR_PORT"
--
2.25.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [bitbake-devel] [PATCH] Added double quotes aound variables in bitbake/source to prevent gobbling or splitting
2022-04-05 18:29 [PATCH] Added double quotes aound variables in bitbake/source to prevent gobbling or splitting Abongwa Bonalais Amahnui
@ 2022-04-05 19:34 ` Richard Purdie
2022-04-05 20:02 ` Abongwa Amahnui Bonalais
2022-04-05 20:44 ` [bitbake-devel] " Peter Kjellerstedt
1 sibling, 1 reply; 7+ messages in thread
From: Richard Purdie @ 2022-04-05 19:34 UTC (permalink / raw)
To: Abongwa Amahnui Bonalais, bitbake-devel
Hi,
Thanks for the patch, I have a question below.
On Tue, 2022-04-05 at 19:29 +0100, Abongwa Amahnui Bonalais wrote:
> Signed-off-by: Abongwa Bonalais Amahnui <abongwabonalais@gmail.com>
> ---
> bitbake/bin/toaster | 65 +++++++++++++++++++++++----------------------
> 1 file changed, 33 insertions(+), 32 deletions(-)
>
> diff --git a/bitbake/bin/toaster b/bitbake/bin/toaster
> index 558a819570..d98c4c69f0 100755
> --- a/bitbake/bin/toaster
> +++ b/bitbake/bin/toaster
> @@ -1,4 +1,5 @@
> -#!/bin/echo ERROR: This script needs to be sourced. Please run as .
> +#!/bin/sh
> +echo ERROR: This script needs to be sourced. Please run as .
>
> # toaster - shell script to start Toaster
>
Changing /bin/echo to /bin/sh probably isn't intentional? We do intend the
script to be sourced rather than run directly. How did you test the changes?
Cheers,
Richard
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] Added double quotes aound variables in bitbake/source to prevent gobbling or splitting
2022-04-05 19:34 ` [bitbake-devel] " Richard Purdie
@ 2022-04-05 20:02 ` Abongwa Amahnui Bonalais
2022-04-05 20:16 ` Abongwa Amahnui Bonalais
0 siblings, 1 reply; 7+ messages in thread
From: Abongwa Amahnui Bonalais @ 2022-04-05 20:02 UTC (permalink / raw)
To: bitbake-devel
[-- Attachment #1.1: Type: text/plain, Size: 327 bytes --]
I tested the changes by running shellcheck toaster.
I did so the first time and it returned
"^-- SC1008: This shebang was unrecognized. ShellCheck only supports sh/bash/dash/ksh. Add a 'shell' directive to specify.
^-- SC2096: On most OS, shebangs can only specify a single parameter.
"
as shown in the attachment below.
[-- Attachment #1.2: Type: text/html, Size: 363 bytes --]
[-- Attachment #2: Screenshot from 2022-04-05 20-58-32.png --]
[-- Type: image/png, Size: 252206 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] Added double quotes aound variables in bitbake/source to prevent gobbling or splitting
2022-04-05 20:02 ` Abongwa Amahnui Bonalais
@ 2022-04-05 20:16 ` Abongwa Amahnui Bonalais
0 siblings, 0 replies; 7+ messages in thread
From: Abongwa Amahnui Bonalais @ 2022-04-05 20:16 UTC (permalink / raw)
To: bitbake-devel
[-- Attachment #1: Type: text/plain, Size: 361 bytes --]
Hi Richard
I'm sorry, I just saw the first email now. I wish to ask if the I could revert the change on the first line, Allowing just the changes to the spaces quoting. I actually intended to send that as a different patch but u I untintentionally included it this path.
If the quoting is fine, I will send a patch that fixes just the quoting issue.
Thanks
[-- Attachment #2: Type: text/html, Size: 373 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: [bitbake-devel] [PATCH] Added double quotes aound variables in bitbake/source to prevent gobbling or splitting
2022-04-05 18:29 [PATCH] Added double quotes aound variables in bitbake/source to prevent gobbling or splitting Abongwa Bonalais Amahnui
2022-04-05 19:34 ` [bitbake-devel] " Richard Purdie
@ 2022-04-05 20:44 ` Peter Kjellerstedt
2022-04-05 21:22 ` Abongwa Amahnui Bonalais
2022-04-05 21:50 ` Abongwa Amahnui Bonalais
1 sibling, 2 replies; 7+ messages in thread
From: Peter Kjellerstedt @ 2022-04-05 20:44 UTC (permalink / raw)
To: Abongwa Amahnui Bonalais, bitbake-devel
[ Since you seem new to the process of reviewing via mail, please
note that I have added comments throughout the entire patch below. ]
> -----Original Message-----
> From: bitbake-devel@lists.openembedded.org <bitbake-
> devel@lists.openembedded.org> On Behalf Of Abongwa Amahnui Bonalais
> Sent: den 5 april 2022 20:29
> To: bitbake-devel@lists.openembedded.org
> Cc: Abongwa Bonalais Amahnui <abongwabonalais@gmail.com>
> Subject: [bitbake-devel] [PATCH] Added double quotes aound variables in bitbake/source to prevent gobbling or splitting
Always prefix the subject line with the affected recipe name or similar.
Also keep the subject short, typically shorter than 72 characters.
A better subject in this case would be:
toaster: Add quoting of variables to avoid splitting
Then there should be a description that gives a motivation for
why this is needed and any other relevant information.
>
> Signed-off-by: Abongwa Bonalais Amahnui <abongwabonalais@gmail.com>
> ---
> bitbake/bin/toaster | 65 +++++++++++++++++++++++----------------------
> 1 file changed, 33 insertions(+), 32 deletions(-)
>
> diff --git a/bitbake/bin/toaster b/bitbake/bin/toaster
> index 558a819570..d98c4c69f0 100755
> --- a/bitbake/bin/toaster
> +++ b/bitbake/bin/toaster
> @@ -1,4 +1,5 @@
> -#!/bin/echo ERROR: This script needs to be sourced. Please run as .
> +#!/bin/sh
> +echo ERROR: This script needs to be sourced. Please run as .
Leave as it was. It is explicitly _not_ using #!/bin/sh as shebang line
to catch misuse.
>
> # toaster - shell script to start Toaster
>
> @@ -20,8 +21,8 @@ Usage 2: source toaster manage [createsuperuser|lsupdates|migrate|makemigrations
> custom_extention()
> {
>
> custom_extension=$BBBASEDIR/lib/toaster/orm/fixtures/custom_toaster_append.sh
> - if [ -f $custom_extension ] ; then
> - $custom_extension $*
> + if [ -f "$custom_extension" ] ; then
> + $custom_extension "$*"
> fi
> }
>
> @@ -51,19 +52,19 @@ databaseCheck()
> webserverKillAll()
> {
> local pidfile
> - if [ -f ${BUILDDIR}/.toastermain.pid ] ; then
> + if [ -f "${BUILDDIR}"/.toastermain.pid ] ; then
While it is technically correct, please put the quotes around the
entire string to make it more readable, i.e.:
if [ -f "${BUILDDIR}/.toastermain.pid" ] ; then
This applies to the rest of the changes in this file.
> custom_extention web_stop_postpend
> else
> custom_extention noweb_stop_postpend
> fi
> - for pidfile in ${BUILDDIR}/.toastermain.pid ${BUILDDIR}/.runbuilds.pid; do
> - if [ -f ${pidfile} ]; then
> - pid=`cat ${pidfile}`
> - while kill -0 $pid 2>/dev/null; do
> - kill -SIGTERM $pid 2>/dev/null
> + for pidfile in "${BUILDDIR}"/.toastermain.pid "${BUILDDIR}"/.runbuilds.pid; do
> + if [ -f "${pidfile}" ]; then
> + pid=`cat "${pidfile}"`
> + while kill -0 "$pid" 2>/dev/null; do
> + kill -SIGTERM "$pid" 2>/dev/null
> sleep 1
> done
> - rm ${pidfile}
> + rm "${pidfile}"
> fi
> done
> }
> @@ -84,8 +85,8 @@ webserverStartAll()
> echo "Starting webserver..."
>
> $MANAGE runserver --noreload "$ADDR_PORT" \
> - </dev/null >>${BUILDDIR}/toaster_web.log 2>&1 \
> - & echo $! >${BUILDDIR}/.toastermain.pid
> + </dev/null >>"${BUILDDIR}"/toaster_web.log 2>&1 \
> + & echo "$!" >"${BUILDDIR}"/.toastermain.pid
>
> sleep 1
>
> @@ -95,7 +96,7 @@ webserverStartAll()
> else
> echo "Toaster development webserver started at http://$ADDR_PORT"
> echo -e "\nYou can now run 'bitbake <target>' on the command line and monitor your build in Toaster.\nYou can also use a Toaster project to configure and run a build.\n"
> - custom_extention web_start_postpend $ADDR_PORT
> + custom_extention web_start_postpend "$ADDR_PORT"
> fi
>
> return $retval
> @@ -131,8 +132,8 @@ verify_prereq() {
> exp=$exp'vmax=["%02d" % int(n) for n in "\4".split(".")];'
> exp=$exp'sys.exit(not (version \1 vmin and version \3 vmax))'
> exp=$exp'/p'
> - if ! sed -n "$exp" $reqfile | python3 - ; then
> - req=`grep ^Django $reqfile`
> + if ! sed -n "$exp" "$reqfile" | python3 - ; then
> + req=`grep ^Django "$reqfile"`
> echo "This program needs $req"
> echo "Please install with pip3 install -r $reqfile"
> return 2
> @@ -150,10 +151,10 @@ else
> TOASTER=$0
> fi
>
> -export BBBASEDIR=`dirname $TOASTER`/..
> +export BBBASEDIR=`dirname "$TOASTER"`/..
> MANAGE="python3 $BBBASEDIR/lib/toaster/manage.py"
> if [ -z "$OE_ROOT" ]; then
> - OE_ROOT=`dirname $TOASTER`/../..
> + OE_ROOT=`dirname "$TOASTER"`/../..
> fi
>
> # this is the configuraton file we are using for toaster
> @@ -164,7 +165,7 @@ fi
> # in the local layers that currently make using an arbitrary
> # toasterconf.json difficult.
>
> -. $OE_ROOT/.templateconf
> +. "$OE_ROOT"/.templateconf
> if [ -n "$TEMPLATECONF" ]; then
> if [ ! -d "$TEMPLATECONF" ]; then
> # Allow TEMPLATECONF=meta-xyz/conf as a shortcut
> @@ -199,10 +200,10 @@ for param in $*; do
> webport=*)
> ADDR_PORT="${param#*=}"
> # Split the addr:port string
> - ADDR=`echo $ADDR_PORT | cut -f 1 -d ':'`
> - PORT=`echo $ADDR_PORT | cut -f 2 -d ':'`
> + ADDR=`echo "$ADDR_PORT" | cut -f 1 -d ':'`
> + PORT=`echo "$ADDR_PORT" | cut -f 2 -d ':'`
> # If only a port has been speified then set address to localhost.
> - if [ $ADDR = $PORT ] ; then
> + if [ "$ADDR" = "$PORT" ] ; then
> ADDR_PORT="localhost:$PORT"
> fi
> ;;
> @@ -229,7 +230,7 @@ for param in $*; do
> esac
> done
>
> -if [ `basename \"$0\"` = `basename \"${TOASTER}\"` ]; then
> +if [ `basename \""$0"\"` = `basename \""${TOASTER}"\"` ]; then
That is wrong (as the original code was wrong). Change it to:
if [ `basename "$0"` = `basename "${TOASTER}"` ]; then
> echo "Error: This script needs to be sourced. Please run as . $TOASTER"
> return 1
> fi
> @@ -265,7 +266,7 @@ fi
> echo "The system will $CMD."
>
> # Execute the commands
> -custom_extention toaster_prepend $CMD $ADDR_PORT
> +custom_extention toaster_prepend "$CMD" "$ADDR_PORT"
>
> case $CMD in
> start )
> @@ -279,7 +280,7 @@ case $CMD in
> # Create configuration file
> conf=${BUILDDIR}/conf/local.conf
> line='INHERIT+="toaster buildhistory"'
> - grep -q "$line" $conf || echo $line >> $conf
> + grep -q "$line" "$conf" || echo "$line" >> "$conf"
>
> if [ $WEBSERVER -eq 0 ] ; then
> # Do not update the database for "noweb" unless
> @@ -290,17 +291,17 @@ case $CMD in
> return 4
> fi
> fi
> - custom_extention noweb_start_postpend $ADDR_PORT
> + custom_extention noweb_start_postpend "$ADDR_PORT"
> fi
> - if [ $WEBSERVER -gt 0 ] && ! webserverStartAll; then
> + if [ "$WEBSERVER" -gt 0 ] && ! webserverStartAll; then
> echo "Failed ${CMD}."
> return 4
> fi
> export BITBAKE_UI='toasterui'
> if [ $TOASTER_BUILDSERVER -eq 1 ] ; then
> $MANAGE runbuilds \
> - </dev/null >>${BUILDDIR}/toaster_runbuilds.log 2>&1 \
> - & echo $! >${BUILDDIR}/.runbuilds.pid
> + </dev/null >>"${BUILDDIR}"/toaster_runbuilds.log 2>&1 \
> + & echo $! >"${BUILDDIR}"/.runbuilds.pid
> else
> echo "Toaster build server not started."
> fi
> @@ -308,7 +309,7 @@ case $CMD in
> # set fail safe stop system on terminal exit
> trap stop_system SIGHUP
> echo "Successful ${CMD}."
> - custom_extention toaster_postpend $CMD $ADDR_PORT
> + custom_extention toaster_postpend "$CMD" "$ADDR_PORT"
> return 0
> ;;
> stop )
> @@ -316,9 +317,9 @@ case $CMD in
> echo "Successful ${CMD}."
> ;;
> manage )
> - cd $BBBASEDIR/lib/toaster
> - $MANAGE $manage_cmd
> + cd "$BBBASEDIR"/lib/toaster
> + "$MANAGE $manage_cmd"
> ;;
> esac
> -custom_extention toaster_postpend $CMD $ADDR_PORT
> +custom_extention toaster_postpend "$CMD" "$ADDR_PORT"
>
> --
> 2.25.1
//Peter
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] Added double quotes aound variables in bitbake/source to prevent gobbling or splitting
2022-04-05 20:44 ` [bitbake-devel] " Peter Kjellerstedt
@ 2022-04-05 21:22 ` Abongwa Amahnui Bonalais
2022-04-05 21:50 ` Abongwa Amahnui Bonalais
1 sibling, 0 replies; 7+ messages in thread
From: Abongwa Amahnui Bonalais @ 2022-04-05 21:22 UTC (permalink / raw)
To: bitbake-devel
[-- Attachment #1: Type: text/plain, Size: 87 bytes --]
Hi Peter,
Thanks alot for the review, I will do the changes and send a patch for it.
[-- Attachment #2: Type: text/html, Size: 91 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] Added double quotes aound variables in bitbake/source to prevent gobbling or splitting
2022-04-05 20:44 ` [bitbake-devel] " Peter Kjellerstedt
2022-04-05 21:22 ` Abongwa Amahnui Bonalais
@ 2022-04-05 21:50 ` Abongwa Amahnui Bonalais
1 sibling, 0 replies; 7+ messages in thread
From: Abongwa Amahnui Bonalais @ 2022-04-05 21:50 UTC (permalink / raw)
To: bitbake-devel
[-- Attachment #1: Type: text/plain, Size: 118 bytes --]
Hi Peter
this is the link to the new patch I created.
https://lists.openembedded.org/g/bitbake-devel/message/13591
[-- Attachment #2: Type: text/html, Size: 238 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2022-04-06 16:33 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-04-05 18:29 [PATCH] Added double quotes aound variables in bitbake/source to prevent gobbling or splitting Abongwa Bonalais Amahnui
2022-04-05 19:34 ` [bitbake-devel] " Richard Purdie
2022-04-05 20:02 ` Abongwa Amahnui Bonalais
2022-04-05 20:16 ` Abongwa Amahnui Bonalais
2022-04-05 20:44 ` [bitbake-devel] " Peter Kjellerstedt
2022-04-05 21:22 ` Abongwa Amahnui Bonalais
2022-04-05 21:50 ` Abongwa Amahnui Bonalais
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.