[RFC PATCH 0/5] Split a huge page to any lower order pages

[RFC PATCH 0/5] Split a huge page to any lower order pages

[Zi Yan]

From: Zi Yan <ziy@nvidia.com>

Hi all,

With Matthew's huge pagecache page patches merged, we are able to handle any
size pagecache pages, but currently split_huge_page can only split a huge page
to order-0 pages. This can easily erase the benefit of having huge pagecache
pages, when operations like truncate might want to keep pages larger than
order-0. In response, here is the patches to add support for splitting a huge
page to any lower order pages.

The patchset is on top of mmotm-2022-03-16-17-42.

* Patch 1 and 2 add new_order parameter split_page_memcg() and
  split_page_owner() and prepare for upcoming changes.
* Patch 3 adds split_huge_page_to_list_to_order() to split a huge page
  to any lower order. The original split_huge_page_to_list() calls
  split_huge_page_to_list_to_order() with new_order = 0.
* Patch 4 uses split_huge_page_to_list_to_order() in huge pagecache page
  truncation instead of split the huge page all the way down to order-0.
* Patch 5 adds a test API to debugfs and test cases in
  split_huge_page_test selftests.

Comments and/or suggestions are welcome.

Zi Yan (5):
  mm: memcg: make memcg huge page split support any order split.
  mm: page_owner: add support for splitting to any order in split
    page_owner.
  mm: thp: split huge page to any lower order pages.
  mm: truncate: split huge page cache page to a non-zero order if
    possible.
  mm: huge_memory: enable debugfs to split huge pages to any order.

 include/linux/huge_mm.h                       |   8 +
 include/linux/memcontrol.h                    |   2 +-
 include/linux/page_owner.h                    |  12 +-
 mm/huge_memory.c                              | 139 +++++++----
 mm/memcontrol.c                               |  10 +-
 mm/page_alloc.c                               |   4 +-
 mm/page_owner.c                               |  13 +-
 mm/truncate.c                                 |  33 ++-
 .../selftests/vm/split_huge_page_test.c       | 219 +++++++++++++++---
 9 files changed, 347 insertions(+), 93 deletions(-)

-- 
2.35.1

[RFC PATCH 0/5] Split a huge page to any lower order pages

[Zi Yan]

From: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

Hi all,

With Matthew's huge pagecache page patches merged, we are able to handle any
size pagecache pages, but currently split_huge_page can only split a huge page
to order-0 pages. This can easily erase the benefit of having huge pagecache
pages, when operations like truncate might want to keep pages larger than
order-0. In response, here is the patches to add support for splitting a huge
page to any lower order pages.

The patchset is on top of mmotm-2022-03-16-17-42.

* Patch 1 and 2 add new_order parameter split_page_memcg() and
  split_page_owner() and prepare for upcoming changes.
* Patch 3 adds split_huge_page_to_list_to_order() to split a huge page
  to any lower order. The original split_huge_page_to_list() calls
  split_huge_page_to_list_to_order() with new_order = 0.
* Patch 4 uses split_huge_page_to_list_to_order() in huge pagecache page
  truncation instead of split the huge page all the way down to order-0.
* Patch 5 adds a test API to debugfs and test cases in
  split_huge_page_test selftests.

Comments and/or suggestions are welcome.

Zi Yan (5):
  mm: memcg: make memcg huge page split support any order split.
  mm: page_owner: add support for splitting to any order in split
    page_owner.
  mm: thp: split huge page to any lower order pages.
  mm: truncate: split huge page cache page to a non-zero order if
    possible.
  mm: huge_memory: enable debugfs to split huge pages to any order.

 include/linux/huge_mm.h                       |   8 +
 include/linux/memcontrol.h                    |   2 +-
 include/linux/page_owner.h                    |  12 +-
 mm/huge_memory.c                              | 139 +++++++----
 mm/memcontrol.c                               |  10 +-
 mm/page_alloc.c                               |   4 +-
 mm/page_owner.c                               |  13 +-
 mm/truncate.c                                 |  33 ++-
 .../selftests/vm/split_huge_page_test.c       | 219 +++++++++++++++---
 9 files changed, 347 insertions(+), 93 deletions(-)

-- 
2.35.1

[RFC PATCH 1/5] mm: memcg: make memcg huge page split support any order split.

[Zi Yan]

From: Zi Yan <ziy@nvidia.com>

It sets memcg information for the pages after the split. A new parameter
new_order is added to tell the new page order, always 0 for now. It
prepares for upcoming changes to support split huge page to any lower
order.

Signed-off-by: Zi Yan <ziy@nvidia.com>
---
 include/linux/memcontrol.h |  2 +-
 mm/huge_memory.c           |  2 +-
 mm/memcontrol.c            | 10 +++++-----
 mm/page_alloc.c            |  2 +-
 4 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 89b14729d59f..e71189454bf0 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -1116,7 +1116,7 @@ static inline void memcg_memory_event_mm(struct mm_struct *mm,
 	rcu_read_unlock();
 }
 
-void split_page_memcg(struct page *head, unsigned int nr);
+void split_page_memcg(struct page *head, unsigned int nr, unsigned int new_order);
 
 unsigned long mem_cgroup_soft_limit_reclaim(pg_data_t *pgdat, int order,
 						gfp_t gfp_mask,
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 2fe38212e07c..640040c386f0 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2371,7 +2371,7 @@ static void __split_huge_page(struct page *page, struct list_head *list,
 	int i;
 
 	/* complete memcg works before add pages to LRU */
-	split_page_memcg(head, nr);
+	split_page_memcg(head, nr, 0);
 
 	if (PageAnon(head) && PageSwapCache(head)) {
 		swp_entry_t entry = { .val = page_private(head) };
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 43b2a22ce812..e7da413ac174 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -3262,22 +3262,22 @@ void obj_cgroup_uncharge(struct obj_cgroup *objcg, size_t size)
 /*
  * Because page_memcg(head) is not set on tails, set it now.
  */
-void split_page_memcg(struct page *head, unsigned int nr)
+void split_page_memcg(struct page *head, unsigned int nr, unsigned int new_order)
 {
 	struct folio *folio = page_folio(head);
 	struct mem_cgroup *memcg = folio_memcg(folio);
-	int i;
+	int i, new_nr = 1 << new_order;
 
 	if (mem_cgroup_disabled() || !memcg)
 		return;
 
-	for (i = 1; i < nr; i++)
+	for (i = new_nr; i < nr; i += new_nr)
 		folio_page(folio, i)->memcg_data = folio->memcg_data;
 
 	if (folio_memcg_kmem(folio))
-		obj_cgroup_get_many(__folio_objcg(folio), nr - 1);
+		obj_cgroup_get_many(__folio_objcg(folio), nr / new_nr - 1);
 	else
-		css_get_many(&memcg->css, nr - 1);
+		css_get_many(&memcg->css, nr / new_nr - 1);
 }
 
 #ifdef CONFIG_MEMCG_SWAP
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index f648decfe39d..d982919b9e51 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3515,7 +3515,7 @@ void split_page(struct page *page, unsigned int order)
 	for (i = 1; i < (1 << order); i++)
 		set_page_refcounted(page + i);
 	split_page_owner(page, 1 << order);
-	split_page_memcg(page, 1 << order);
+	split_page_memcg(page, 1 << order, 0);
 }
 EXPORT_SYMBOL_GPL(split_page);
 
-- 
2.35.1

[RFC PATCH 1/5] mm: memcg: make memcg huge page split support any order split.

[Zi Yan]

From: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

It sets memcg information for the pages after the split. A new parameter
new_order is added to tell the new page order, always 0 for now. It
prepares for upcoming changes to support split huge page to any lower
order.

Signed-off-by: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 include/linux/memcontrol.h |  2 +-
 mm/huge_memory.c           |  2 +-
 mm/memcontrol.c            | 10 +++++-----
 mm/page_alloc.c            |  2 +-
 4 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 89b14729d59f..e71189454bf0 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -1116,7 +1116,7 @@ static inline void memcg_memory_event_mm(struct mm_struct *mm,
 	rcu_read_unlock();
 }
 
-void split_page_memcg(struct page *head, unsigned int nr);
+void split_page_memcg(struct page *head, unsigned int nr, unsigned int new_order);
 
 unsigned long mem_cgroup_soft_limit_reclaim(pg_data_t *pgdat, int order,
 						gfp_t gfp_mask,
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 2fe38212e07c..640040c386f0 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2371,7 +2371,7 @@ static void __split_huge_page(struct page *page, struct list_head *list,
 	int i;
 
 	/* complete memcg works before add pages to LRU */
-	split_page_memcg(head, nr);
+	split_page_memcg(head, nr, 0);
 
 	if (PageAnon(head) && PageSwapCache(head)) {
 		swp_entry_t entry = { .val = page_private(head) };
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 43b2a22ce812..e7da413ac174 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -3262,22 +3262,22 @@ void obj_cgroup_uncharge(struct obj_cgroup *objcg, size_t size)
 /*
  * Because page_memcg(head) is not set on tails, set it now.
  */
-void split_page_memcg(struct page *head, unsigned int nr)
+void split_page_memcg(struct page *head, unsigned int nr, unsigned int new_order)
 {
 	struct folio *folio = page_folio(head);
 	struct mem_cgroup *memcg = folio_memcg(folio);
-	int i;
+	int i, new_nr = 1 << new_order;
 
 	if (mem_cgroup_disabled() || !memcg)
 		return;
 
-	for (i = 1; i < nr; i++)
+	for (i = new_nr; i < nr; i += new_nr)
 		folio_page(folio, i)->memcg_data = folio->memcg_data;
 
 	if (folio_memcg_kmem(folio))
-		obj_cgroup_get_many(__folio_objcg(folio), nr - 1);
+		obj_cgroup_get_many(__folio_objcg(folio), nr / new_nr - 1);
 	else
-		css_get_many(&memcg->css, nr - 1);
+		css_get_many(&memcg->css, nr / new_nr - 1);
 }
 
 #ifdef CONFIG_MEMCG_SWAP
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index f648decfe39d..d982919b9e51 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3515,7 +3515,7 @@ void split_page(struct page *page, unsigned int order)
 	for (i = 1; i < (1 << order); i++)
 		set_page_refcounted(page + i);
 	split_page_owner(page, 1 << order);
-	split_page_memcg(page, 1 << order);
+	split_page_memcg(page, 1 << order, 0);
 }
 EXPORT_SYMBOL_GPL(split_page);
 
-- 
2.35.1

Re: [RFC PATCH 1/5] mm: memcg: make memcg huge page split support any order split.

[Roman Gushchin]

On Mon, Mar 21, 2022 at 10:21:24AM -0400, Zi Yan wrote:
> From: Zi Yan <ziy@nvidia.com>
> 
> It sets memcg information for the pages after the split. A new parameter
> new_order is added to tell the new page order, always 0 for now. It
> prepares for upcoming changes to support split huge page to any lower
> order.
> 
> Signed-off-by: Zi Yan <ziy@nvidia.com>
> ---
>  include/linux/memcontrol.h |  2 +-
>  mm/huge_memory.c           |  2 +-
>  mm/memcontrol.c            | 10 +++++-----
>  mm/page_alloc.c            |  2 +-
>  4 files changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
> index 89b14729d59f..e71189454bf0 100644
> --- a/include/linux/memcontrol.h
> +++ b/include/linux/memcontrol.h
> @@ -1116,7 +1116,7 @@ static inline void memcg_memory_event_mm(struct mm_struct *mm,
>  	rcu_read_unlock();
>  }
>  
> -void split_page_memcg(struct page *head, unsigned int nr);
> +void split_page_memcg(struct page *head, unsigned int nr, unsigned int new_order);

It looks a bit inconsistent, can't we switch to use either nr or order for both
arguments? The latter is preferable.

Other than that, the patch looks good to me.

Thanks!

Re: [RFC PATCH 1/5] mm: memcg: make memcg huge page split support any order split.

[Roman Gushchin]

On Mon, Mar 21, 2022 at 10:21:24AM -0400, Zi Yan wrote:
> From: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> 
> It sets memcg information for the pages after the split. A new parameter
> new_order is added to tell the new page order, always 0 for now. It
> prepares for upcoming changes to support split huge page to any lower
> order.
> 
> Signed-off-by: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---
>  include/linux/memcontrol.h |  2 +-
>  mm/huge_memory.c           |  2 +-
>  mm/memcontrol.c            | 10 +++++-----
>  mm/page_alloc.c            |  2 +-
>  4 files changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
> index 89b14729d59f..e71189454bf0 100644
> --- a/include/linux/memcontrol.h
> +++ b/include/linux/memcontrol.h
> @@ -1116,7 +1116,7 @@ static inline void memcg_memory_event_mm(struct mm_struct *mm,
>  	rcu_read_unlock();
>  }
>  
> -void split_page_memcg(struct page *head, unsigned int nr);
> +void split_page_memcg(struct page *head, unsigned int nr, unsigned int new_order);

It looks a bit inconsistent, can't we switch to use either nr or order for both
arguments? The latter is preferable.

Other than that, the patch looks good to me.

Thanks!

Re: [RFC PATCH 1/5] mm: memcg: make memcg huge page split support any order split.

[Zi Yan]

[-- Attachment #1: Type: text/plain, Size: 1378 bytes --]

On 21 Mar 2022, at 14:57, Roman Gushchin wrote:

> On Mon, Mar 21, 2022 at 10:21:24AM -0400, Zi Yan wrote:
>> From: Zi Yan <ziy@nvidia.com>
>>
>> It sets memcg information for the pages after the split. A new parameter
>> new_order is added to tell the new page order, always 0 for now. It
>> prepares for upcoming changes to support split huge page to any lower
>> order.
>>
>> Signed-off-by: Zi Yan <ziy@nvidia.com>
>> ---
>>  include/linux/memcontrol.h |  2 +-
>>  mm/huge_memory.c           |  2 +-
>>  mm/memcontrol.c            | 10 +++++-----
>>  mm/page_alloc.c            |  2 +-
>>  4 files changed, 8 insertions(+), 8 deletions(-)
>>
>> diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
>> index 89b14729d59f..e71189454bf0 100644
>> --- a/include/linux/memcontrol.h
>> +++ b/include/linux/memcontrol.h
>> @@ -1116,7 +1116,7 @@ static inline void memcg_memory_event_mm(struct mm_struct *mm,
>>  	rcu_read_unlock();
>>  }
>>
>> -void split_page_memcg(struct page *head, unsigned int nr);
>> +void split_page_memcg(struct page *head, unsigned int nr, unsigned int new_order);
>
> It looks a bit inconsistent, can't we switch to use either nr or order for both
> arguments? The latter is preferable.

Yes. Will change it to new_nr to be consistent.

>
> Other than that, the patch looks good to me.

Thank you for the review.

--
Best Regards,
Yan, Zi

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 854 bytes --]

Re: [RFC PATCH 1/5] mm: memcg: make memcg huge page split support any order split.

[Zi Yan]

[-- Attachment #1: Type: text/plain, Size: 1409 bytes --]

On 21 Mar 2022, at 14:57, Roman Gushchin wrote:

> On Mon, Mar 21, 2022 at 10:21:24AM -0400, Zi Yan wrote:
>> From: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>>
>> It sets memcg information for the pages after the split. A new parameter
>> new_order is added to tell the new page order, always 0 for now. It
>> prepares for upcoming changes to support split huge page to any lower
>> order.
>>
>> Signed-off-by: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>> ---
>>  include/linux/memcontrol.h |  2 +-
>>  mm/huge_memory.c           |  2 +-
>>  mm/memcontrol.c            | 10 +++++-----
>>  mm/page_alloc.c            |  2 +-
>>  4 files changed, 8 insertions(+), 8 deletions(-)
>>
>> diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
>> index 89b14729d59f..e71189454bf0 100644
>> --- a/include/linux/memcontrol.h
>> +++ b/include/linux/memcontrol.h
>> @@ -1116,7 +1116,7 @@ static inline void memcg_memory_event_mm(struct mm_struct *mm,
>>  	rcu_read_unlock();
>>  }
>>
>> -void split_page_memcg(struct page *head, unsigned int nr);
>> +void split_page_memcg(struct page *head, unsigned int nr, unsigned int new_order);
>
> It looks a bit inconsistent, can't we switch to use either nr or order for both
> arguments? The latter is preferable.

Yes. Will change it to new_nr to be consistent.

>
> Other than that, the patch looks good to me.

Thank you for the review.

Re: [RFC PATCH 1/5] mm: memcg: make memcg huge page split support any order split.

[Matthew Wilcox]

On Mon, Mar 21, 2022 at 03:07:46PM -0400, Zi Yan wrote:
> Yes. Will change it to new_nr to be consistent.

uh, you're going to call ilog2?

I think this would look less inconsistent if 'nr' were an unsigned long
(how long until we need 16GB pages?  Think PPC already supports those)

Re: [RFC PATCH 1/5] mm: memcg: make memcg huge page split support any order split.

[Matthew Wilcox]

On Mon, Mar 21, 2022 at 03:07:46PM -0400, Zi Yan wrote:
> Yes. Will change it to new_nr to be consistent.

uh, you're going to call ilog2?

I think this would look less inconsistent if 'nr' were an unsigned long
(how long until we need 16GB pages?  Think PPC already supports those)

Re: [RFC PATCH 1/5] mm: memcg: make memcg huge page split support any order split.

[Zi Yan]

[-- Attachment #1: Type: text/plain, Size: 584 bytes --]

On 21 Mar 2022, at 15:54, Matthew Wilcox wrote:

> On Mon, Mar 21, 2022 at 03:07:46PM -0400, Zi Yan wrote:
>> Yes. Will change it to new_nr to be consistent.
>
> uh, you're going to call ilog2?

fortunately, no. Inside split_page_memcg(), I probably
need to add VM_BUG_ON(nr % new_nr != 0) to make sure
new_nr is a divisor of nr, since there are a couple
of nr / new_nr operations. Otherwise, new_nr works.

>
> I think this would look less inconsistent if 'nr' were an unsigned long
> (how long until we need 16GB pages?  Think PPC already supports those)


--
Best Regards,
Yan, Zi

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 854 bytes --]

Re: [RFC PATCH 1/5] mm: memcg: make memcg huge page split support any order split.

[Zi Yan]

[-- Attachment #1: Type: text/plain, Size: 557 bytes --]

On 21 Mar 2022, at 15:54, Matthew Wilcox wrote:

> On Mon, Mar 21, 2022 at 03:07:46PM -0400, Zi Yan wrote:
>> Yes. Will change it to new_nr to be consistent.
>
> uh, you're going to call ilog2?

fortunately, no. Inside split_page_memcg(), I probably
need to add VM_BUG_ON(nr % new_nr != 0) to make sure
new_nr is a divisor of nr, since there are a couple
of nr / new_nr operations. Otherwise, new_nr works.

>
> I think this would look less inconsistent if 'nr' were an unsigned long
> (how long until we need 16GB pages?  Think PPC already supports those)

[RFC PATCH 2/5] mm: page_owner: add support for splitting to any order in split page_owner.

[Zi Yan]

From: Zi Yan <ziy@nvidia.com>

It adds a new_order parameter to set new page order in page owner and
uses old_order instead of nr to make the parameters look consistent.
It prepares for upcoming changes to support split huge page to any
lower order.

Signed-off-by: Zi Yan <ziy@nvidia.com>
---
 include/linux/page_owner.h | 12 +++++++-----
 mm/huge_memory.c           |  3 ++-
 mm/page_alloc.c            |  2 +-
 mm/page_owner.c            | 13 +++++++------
 4 files changed, 17 insertions(+), 13 deletions(-)

diff --git a/include/linux/page_owner.h b/include/linux/page_owner.h
index 119a0c9d2a8b..16050cc89274 100644
--- a/include/linux/page_owner.h
+++ b/include/linux/page_owner.h
@@ -11,7 +11,8 @@ extern struct page_ext_operations page_owner_ops;
 extern void __reset_page_owner(struct page *page, unsigned short order);
 extern void __set_page_owner(struct page *page,
 			unsigned short order, gfp_t gfp_mask);
-extern void __split_page_owner(struct page *page, unsigned int nr);
+extern void __split_page_owner(struct page *page, unsigned short old_order,
+			unsigned short new_order);
 extern void __folio_copy_owner(struct folio *newfolio, struct folio *old);
 extern void __set_page_owner_migrate_reason(struct page *page, int reason);
 extern void __dump_page_owner(const struct page *page);
@@ -31,10 +32,11 @@ static inline void set_page_owner(struct page *page,
 		__set_page_owner(page, order, gfp_mask);
 }
 
-static inline void split_page_owner(struct page *page, unsigned int nr)
+static inline void split_page_owner(struct page *page, unsigned int old_order,
+			unsigned int new_order)
 {
 	if (static_branch_unlikely(&page_owner_inited))
-		__split_page_owner(page, nr);
+		__split_page_owner(page, old_order, new_order);
 }
 static inline void folio_copy_owner(struct folio *newfolio, struct folio *old)
 {
@@ -56,11 +58,11 @@ static inline void reset_page_owner(struct page *page, unsigned short order)
 {
 }
 static inline void set_page_owner(struct page *page,
-			unsigned int order, gfp_t gfp_mask)
+			unsigned short order, gfp_t gfp_mask)
 {
 }
 static inline void split_page_owner(struct page *page,
-			unsigned short order)
+			unsigned short old_order, unsigned short new_order)
 {
 }
 static inline void folio_copy_owner(struct folio *newfolio, struct folio *folio)
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 640040c386f0..fcfa46af6c4c 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2367,6 +2367,7 @@ static void __split_huge_page(struct page *page, struct list_head *list,
 	struct lruvec *lruvec;
 	struct address_space *swap_cache = NULL;
 	unsigned long offset = 0;
+	unsigned int order = thp_order(head);
 	unsigned int nr = thp_nr_pages(head);
 	int i;
 
@@ -2408,7 +2409,7 @@ static void __split_huge_page(struct page *page, struct list_head *list,
 	unlock_page_lruvec(lruvec);
 	/* Caller disabled irqs, so they are still disabled here */
 
-	split_page_owner(head, nr);
+	split_page_owner(head, order, 0);
 
 	/* See comment in __split_huge_page_tail() */
 	if (PageAnon(head)) {
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index d982919b9e51..9cac40c26c58 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3514,7 +3514,7 @@ void split_page(struct page *page, unsigned int order)
 
 	for (i = 1; i < (1 << order); i++)
 		set_page_refcounted(page + i);
-	split_page_owner(page, 1 << order);
+	split_page_owner(page, order, 0);
 	split_page_memcg(page, 1 << order, 0);
 }
 EXPORT_SYMBOL_GPL(split_page);
diff --git a/mm/page_owner.c b/mm/page_owner.c
index 0a9588506571..52013c846d19 100644
--- a/mm/page_owner.c
+++ b/mm/page_owner.c
@@ -202,19 +202,20 @@ void __set_page_owner_migrate_reason(struct page *page, int reason)
 	page_owner->last_migrate_reason = reason;
 }
 
-void __split_page_owner(struct page *page, unsigned int nr)
+void __split_page_owner(struct page *page, unsigned short old_order,
+			unsigned short new_order)
 {
-	int i;
-	struct page_ext *page_ext = lookup_page_ext(page);
+	int i, old_nr = 1 << old_order, new_nr = 1 << new_order;
+	struct page_ext *page_ext;
 	struct page_owner *page_owner;
 
 	if (unlikely(!page_ext))
 		return;
 
-	for (i = 0; i < nr; i++) {
+	for (i = 0; i < old_nr; i += new_nr) {
+		page_ext = lookup_page_ext(page + i);
 		page_owner = get_page_owner(page_ext);
-		page_owner->order = 0;
-		page_ext = page_ext_next(page_ext);
+		page_owner->order = new_order;
 	}
 }
 
-- 
2.35.1

[RFC PATCH 2/5] mm: page_owner: add support for splitting to any order in split page_owner.

[Zi Yan]

From: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

It adds a new_order parameter to set new page order in page owner and
uses old_order instead of nr to make the parameters look consistent.
It prepares for upcoming changes to support split huge page to any
lower order.

Signed-off-by: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 include/linux/page_owner.h | 12 +++++++-----
 mm/huge_memory.c           |  3 ++-
 mm/page_alloc.c            |  2 +-
 mm/page_owner.c            | 13 +++++++------
 4 files changed, 17 insertions(+), 13 deletions(-)

diff --git a/include/linux/page_owner.h b/include/linux/page_owner.h
index 119a0c9d2a8b..16050cc89274 100644
--- a/include/linux/page_owner.h
+++ b/include/linux/page_owner.h
@@ -11,7 +11,8 @@ extern struct page_ext_operations page_owner_ops;
 extern void __reset_page_owner(struct page *page, unsigned short order);
 extern void __set_page_owner(struct page *page,
 			unsigned short order, gfp_t gfp_mask);
-extern void __split_page_owner(struct page *page, unsigned int nr);
+extern void __split_page_owner(struct page *page, unsigned short old_order,
+			unsigned short new_order);
 extern void __folio_copy_owner(struct folio *newfolio, struct folio *old);
 extern void __set_page_owner_migrate_reason(struct page *page, int reason);
 extern void __dump_page_owner(const struct page *page);
@@ -31,10 +32,11 @@ static inline void set_page_owner(struct page *page,
 		__set_page_owner(page, order, gfp_mask);
 }
 
-static inline void split_page_owner(struct page *page, unsigned int nr)
+static inline void split_page_owner(struct page *page, unsigned int old_order,
+			unsigned int new_order)
 {
 	if (static_branch_unlikely(&page_owner_inited))
-		__split_page_owner(page, nr);
+		__split_page_owner(page, old_order, new_order);
 }
 static inline void folio_copy_owner(struct folio *newfolio, struct folio *old)
 {
@@ -56,11 +58,11 @@ static inline void reset_page_owner(struct page *page, unsigned short order)
 {
 }
 static inline void set_page_owner(struct page *page,
-			unsigned int order, gfp_t gfp_mask)
+			unsigned short order, gfp_t gfp_mask)
 {
 }
 static inline void split_page_owner(struct page *page,
-			unsigned short order)
+			unsigned short old_order, unsigned short new_order)
 {
 }
 static inline void folio_copy_owner(struct folio *newfolio, struct folio *folio)
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 640040c386f0..fcfa46af6c4c 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2367,6 +2367,7 @@ static void __split_huge_page(struct page *page, struct list_head *list,
 	struct lruvec *lruvec;
 	struct address_space *swap_cache = NULL;
 	unsigned long offset = 0;
+	unsigned int order = thp_order(head);
 	unsigned int nr = thp_nr_pages(head);
 	int i;
 
@@ -2408,7 +2409,7 @@ static void __split_huge_page(struct page *page, struct list_head *list,
 	unlock_page_lruvec(lruvec);
 	/* Caller disabled irqs, so they are still disabled here */
 
-	split_page_owner(head, nr);
+	split_page_owner(head, order, 0);
 
 	/* See comment in __split_huge_page_tail() */
 	if (PageAnon(head)) {
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index d982919b9e51..9cac40c26c58 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3514,7 +3514,7 @@ void split_page(struct page *page, unsigned int order)
 
 	for (i = 1; i < (1 << order); i++)
 		set_page_refcounted(page + i);
-	split_page_owner(page, 1 << order);
+	split_page_owner(page, order, 0);
 	split_page_memcg(page, 1 << order, 0);
 }
 EXPORT_SYMBOL_GPL(split_page);
diff --git a/mm/page_owner.c b/mm/page_owner.c
index 0a9588506571..52013c846d19 100644
--- a/mm/page_owner.c
+++ b/mm/page_owner.c
@@ -202,19 +202,20 @@ void __set_page_owner_migrate_reason(struct page *page, int reason)
 	page_owner->last_migrate_reason = reason;
 }
 
-void __split_page_owner(struct page *page, unsigned int nr)
+void __split_page_owner(struct page *page, unsigned short old_order,
+			unsigned short new_order)
 {
-	int i;
-	struct page_ext *page_ext = lookup_page_ext(page);
+	int i, old_nr = 1 << old_order, new_nr = 1 << new_order;
+	struct page_ext *page_ext;
 	struct page_owner *page_owner;
 
 	if (unlikely(!page_ext))
 		return;
 
-	for (i = 0; i < nr; i++) {
+	for (i = 0; i < old_nr; i += new_nr) {
+		page_ext = lookup_page_ext(page + i);
 		page_owner = get_page_owner(page_ext);
-		page_owner->order = 0;
-		page_ext = page_ext_next(page_ext);
+		page_owner->order = new_order;
 	}
 }
 
-- 
2.35.1

Re: [RFC PATCH 2/5] mm: page_owner: add support for splitting to any order in split page_owner.

[Roman Gushchin]

On Mon, Mar 21, 2022 at 10:21:25AM -0400, Zi Yan wrote:
> From: Zi Yan <ziy@nvidia.com>
> 
> It adds a new_order parameter to set new page order in page owner and
> uses old_order instead of nr to make the parameters look consistent.
> It prepares for upcoming changes to support split huge page to any
> lower order.
> 
> Signed-off-by: Zi Yan <ziy@nvidia.com>
> ---
>  include/linux/page_owner.h | 12 +++++++-----
>  mm/huge_memory.c           |  3 ++-
>  mm/page_alloc.c            |  2 +-
>  mm/page_owner.c            | 13 +++++++------
>  4 files changed, 17 insertions(+), 13 deletions(-)
> 
> diff --git a/include/linux/page_owner.h b/include/linux/page_owner.h
> index 119a0c9d2a8b..16050cc89274 100644
> --- a/include/linux/page_owner.h
> +++ b/include/linux/page_owner.h
> @@ -11,7 +11,8 @@ extern struct page_ext_operations page_owner_ops;
>  extern void __reset_page_owner(struct page *page, unsigned short order);
>  extern void __set_page_owner(struct page *page,
>  			unsigned short order, gfp_t gfp_mask);
> -extern void __split_page_owner(struct page *page, unsigned int nr);
> +extern void __split_page_owner(struct page *page, unsigned short old_order,
> +			unsigned short new_order);

Unsigned short here,

>  extern void __folio_copy_owner(struct folio *newfolio, struct folio *old);
>  extern void __set_page_owner_migrate_reason(struct page *page, int reason);
>  extern void __dump_page_owner(const struct page *page);
> @@ -31,10 +32,11 @@ static inline void set_page_owner(struct page *page,
>  		__set_page_owner(page, order, gfp_mask);
>  }
>  
> -static inline void split_page_owner(struct page *page, unsigned int nr)
> +static inline void split_page_owner(struct page *page, unsigned int old_order,
> +			unsigned int new_order)

but unsigned int here.

>  {
>  	if (static_branch_unlikely(&page_owner_inited))
> -		__split_page_owner(page, nr);
> +		__split_page_owner(page, old_order, new_order);
>  }
>  static inline void folio_copy_owner(struct folio *newfolio, struct folio *old)
>  {
> @@ -56,11 +58,11 @@ static inline void reset_page_owner(struct page *page, unsigned short order)
>  {
>  }
>  static inline void set_page_owner(struct page *page,
> -			unsigned int order, gfp_t gfp_mask)
> +			unsigned short order, gfp_t gfp_mask)
>  {
>  }
>  static inline void split_page_owner(struct page *page,
> -			unsigned short order)
> +			unsigned short old_order, unsigned short new_order)
>  {
>  }
>  static inline void folio_copy_owner(struct folio *newfolio, struct folio *folio)
> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> index 640040c386f0..fcfa46af6c4c 100644
> --- a/mm/huge_memory.c
> +++ b/mm/huge_memory.c
> @@ -2367,6 +2367,7 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>  	struct lruvec *lruvec;
>  	struct address_space *swap_cache = NULL;
>  	unsigned long offset = 0;
> +	unsigned int order = thp_order(head);
>  	unsigned int nr = thp_nr_pages(head);
>  	int i;
>  
> @@ -2408,7 +2409,7 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>  	unlock_page_lruvec(lruvec);
>  	/* Caller disabled irqs, so they are still disabled here */
>  
> -	split_page_owner(head, nr);
> +	split_page_owner(head, order, 0);
>  
>  	/* See comment in __split_huge_page_tail() */
>  	if (PageAnon(head)) {
> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> index d982919b9e51..9cac40c26c58 100644
> --- a/mm/page_alloc.c
> +++ b/mm/page_alloc.c
> @@ -3514,7 +3514,7 @@ void split_page(struct page *page, unsigned int order)
>  
>  	for (i = 1; i < (1 << order); i++)
>  		set_page_refcounted(page + i);
> -	split_page_owner(page, 1 << order);
> +	split_page_owner(page, order, 0);
>  	split_page_memcg(page, 1 << order, 0);
>  }
>  EXPORT_SYMBOL_GPL(split_page);
> diff --git a/mm/page_owner.c b/mm/page_owner.c
> index 0a9588506571..52013c846d19 100644
> --- a/mm/page_owner.c
> +++ b/mm/page_owner.c
> @@ -202,19 +202,20 @@ void __set_page_owner_migrate_reason(struct page *page, int reason)
>  	page_owner->last_migrate_reason = reason;
>  }
>  
> -void __split_page_owner(struct page *page, unsigned int nr)
> +void __split_page_owner(struct page *page, unsigned short old_order,
> +			unsigned short new_order)

And short again here. Please, make it consistent.

Other than that, looks good to me. Please, feel free to add
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
after fixing the type inconsistency.

Thank you!

Re: [RFC PATCH 2/5] mm: page_owner: add support for splitting to any order in split page_owner.

[Roman Gushchin]

On Mon, Mar 21, 2022 at 10:21:25AM -0400, Zi Yan wrote:
> From: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> 
> It adds a new_order parameter to set new page order in page owner and
> uses old_order instead of nr to make the parameters look consistent.
> It prepares for upcoming changes to support split huge page to any
> lower order.
> 
> Signed-off-by: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---
>  include/linux/page_owner.h | 12 +++++++-----
>  mm/huge_memory.c           |  3 ++-
>  mm/page_alloc.c            |  2 +-
>  mm/page_owner.c            | 13 +++++++------
>  4 files changed, 17 insertions(+), 13 deletions(-)
> 
> diff --git a/include/linux/page_owner.h b/include/linux/page_owner.h
> index 119a0c9d2a8b..16050cc89274 100644
> --- a/include/linux/page_owner.h
> +++ b/include/linux/page_owner.h
> @@ -11,7 +11,8 @@ extern struct page_ext_operations page_owner_ops;
>  extern void __reset_page_owner(struct page *page, unsigned short order);
>  extern void __set_page_owner(struct page *page,
>  			unsigned short order, gfp_t gfp_mask);
> -extern void __split_page_owner(struct page *page, unsigned int nr);
> +extern void __split_page_owner(struct page *page, unsigned short old_order,
> +			unsigned short new_order);

Unsigned short here,

>  extern void __folio_copy_owner(struct folio *newfolio, struct folio *old);
>  extern void __set_page_owner_migrate_reason(struct page *page, int reason);
>  extern void __dump_page_owner(const struct page *page);
> @@ -31,10 +32,11 @@ static inline void set_page_owner(struct page *page,
>  		__set_page_owner(page, order, gfp_mask);
>  }
>  
> -static inline void split_page_owner(struct page *page, unsigned int nr)
> +static inline void split_page_owner(struct page *page, unsigned int old_order,
> +			unsigned int new_order)

but unsigned int here.

>  {
>  	if (static_branch_unlikely(&page_owner_inited))
> -		__split_page_owner(page, nr);
> +		__split_page_owner(page, old_order, new_order);
>  }
>  static inline void folio_copy_owner(struct folio *newfolio, struct folio *old)
>  {
> @@ -56,11 +58,11 @@ static inline void reset_page_owner(struct page *page, unsigned short order)
>  {
>  }
>  static inline void set_page_owner(struct page *page,
> -			unsigned int order, gfp_t gfp_mask)
> +			unsigned short order, gfp_t gfp_mask)
>  {
>  }
>  static inline void split_page_owner(struct page *page,
> -			unsigned short order)
> +			unsigned short old_order, unsigned short new_order)
>  {
>  }
>  static inline void folio_copy_owner(struct folio *newfolio, struct folio *folio)
> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> index 640040c386f0..fcfa46af6c4c 100644
> --- a/mm/huge_memory.c
> +++ b/mm/huge_memory.c
> @@ -2367,6 +2367,7 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>  	struct lruvec *lruvec;
>  	struct address_space *swap_cache = NULL;
>  	unsigned long offset = 0;
> +	unsigned int order = thp_order(head);
>  	unsigned int nr = thp_nr_pages(head);
>  	int i;
>  
> @@ -2408,7 +2409,7 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>  	unlock_page_lruvec(lruvec);
>  	/* Caller disabled irqs, so they are still disabled here */
>  
> -	split_page_owner(head, nr);
> +	split_page_owner(head, order, 0);
>  
>  	/* See comment in __split_huge_page_tail() */
>  	if (PageAnon(head)) {
> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> index d982919b9e51..9cac40c26c58 100644
> --- a/mm/page_alloc.c
> +++ b/mm/page_alloc.c
> @@ -3514,7 +3514,7 @@ void split_page(struct page *page, unsigned int order)
>  
>  	for (i = 1; i < (1 << order); i++)
>  		set_page_refcounted(page + i);
> -	split_page_owner(page, 1 << order);
> +	split_page_owner(page, order, 0);
>  	split_page_memcg(page, 1 << order, 0);
>  }
>  EXPORT_SYMBOL_GPL(split_page);
> diff --git a/mm/page_owner.c b/mm/page_owner.c
> index 0a9588506571..52013c846d19 100644
> --- a/mm/page_owner.c
> +++ b/mm/page_owner.c
> @@ -202,19 +202,20 @@ void __set_page_owner_migrate_reason(struct page *page, int reason)
>  	page_owner->last_migrate_reason = reason;
>  }
>  
> -void __split_page_owner(struct page *page, unsigned int nr)
> +void __split_page_owner(struct page *page, unsigned short old_order,
> +			unsigned short new_order)

And short again here. Please, make it consistent.

Other than that, looks good to me. Please, feel free to add
Reviewed-by: Roman Gushchin <roman.gushchin-fxUVXftIFDnyG1zEObXtfA@public.gmane.org>
after fixing the type inconsistency.

Thank you!

Re: [RFC PATCH 2/5] mm: page_owner: add support for splitting to any order in split page_owner.

[Zi Yan]

[-- Attachment #1: Type: text/plain, Size: 4785 bytes --]

On 21 Mar 2022, at 15:02, Roman Gushchin wrote:

> On Mon, Mar 21, 2022 at 10:21:25AM -0400, Zi Yan wrote:
>> From: Zi Yan <ziy@nvidia.com>
>>
>> It adds a new_order parameter to set new page order in page owner and
>> uses old_order instead of nr to make the parameters look consistent.
>> It prepares for upcoming changes to support split huge page to any
>> lower order.
>>
>> Signed-off-by: Zi Yan <ziy@nvidia.com>
>> ---
>>  include/linux/page_owner.h | 12 +++++++-----
>>  mm/huge_memory.c           |  3 ++-
>>  mm/page_alloc.c            |  2 +-
>>  mm/page_owner.c            | 13 +++++++------
>>  4 files changed, 17 insertions(+), 13 deletions(-)
>>
>> diff --git a/include/linux/page_owner.h b/include/linux/page_owner.h
>> index 119a0c9d2a8b..16050cc89274 100644
>> --- a/include/linux/page_owner.h
>> +++ b/include/linux/page_owner.h
>> @@ -11,7 +11,8 @@ extern struct page_ext_operations page_owner_ops;
>>  extern void __reset_page_owner(struct page *page, unsigned short order);
>>  extern void __set_page_owner(struct page *page,
>>  			unsigned short order, gfp_t gfp_mask);
>> -extern void __split_page_owner(struct page *page, unsigned int nr);
>> +extern void __split_page_owner(struct page *page, unsigned short old_order,
>> +			unsigned short new_order);
>
> Unsigned short here,
>
>>  extern void __folio_copy_owner(struct folio *newfolio, struct folio *old);
>>  extern void __set_page_owner_migrate_reason(struct page *page, int reason);
>>  extern void __dump_page_owner(const struct page *page);
>> @@ -31,10 +32,11 @@ static inline void set_page_owner(struct page *page,
>>  		__set_page_owner(page, order, gfp_mask);
>>  }
>>
>> -static inline void split_page_owner(struct page *page, unsigned int nr)
>> +static inline void split_page_owner(struct page *page, unsigned int old_order,
>> +			unsigned int new_order)
>
> but unsigned int here.
>
>>  {
>>  	if (static_branch_unlikely(&page_owner_inited))
>> -		__split_page_owner(page, nr);
>> +		__split_page_owner(page, old_order, new_order);
>>  }
>>  static inline void folio_copy_owner(struct folio *newfolio, struct folio *old)
>>  {
>> @@ -56,11 +58,11 @@ static inline void reset_page_owner(struct page *page, unsigned short order)
>>  {
>>  }
>>  static inline void set_page_owner(struct page *page,
>> -			unsigned int order, gfp_t gfp_mask)
>> +			unsigned short order, gfp_t gfp_mask)
>>  {
>>  }
>>  static inline void split_page_owner(struct page *page,
>> -			unsigned short order)
>> +			unsigned short old_order, unsigned short new_order)
>>  {
>>  }
>>  static inline void folio_copy_owner(struct folio *newfolio, struct folio *folio)
>> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
>> index 640040c386f0..fcfa46af6c4c 100644
>> --- a/mm/huge_memory.c
>> +++ b/mm/huge_memory.c
>> @@ -2367,6 +2367,7 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>>  	struct lruvec *lruvec;
>>  	struct address_space *swap_cache = NULL;
>>  	unsigned long offset = 0;
>> +	unsigned int order = thp_order(head);
>>  	unsigned int nr = thp_nr_pages(head);
>>  	int i;
>>
>> @@ -2408,7 +2409,7 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>>  	unlock_page_lruvec(lruvec);
>>  	/* Caller disabled irqs, so they are still disabled here */
>>
>> -	split_page_owner(head, nr);
>> +	split_page_owner(head, order, 0);
>>
>>  	/* See comment in __split_huge_page_tail() */
>>  	if (PageAnon(head)) {
>> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
>> index d982919b9e51..9cac40c26c58 100644
>> --- a/mm/page_alloc.c
>> +++ b/mm/page_alloc.c
>> @@ -3514,7 +3514,7 @@ void split_page(struct page *page, unsigned int order)
>>
>>  	for (i = 1; i < (1 << order); i++)
>>  		set_page_refcounted(page + i);
>> -	split_page_owner(page, 1 << order);
>> +	split_page_owner(page, order, 0);
>>  	split_page_memcg(page, 1 << order, 0);
>>  }
>>  EXPORT_SYMBOL_GPL(split_page);
>> diff --git a/mm/page_owner.c b/mm/page_owner.c
>> index 0a9588506571..52013c846d19 100644
>> --- a/mm/page_owner.c
>> +++ b/mm/page_owner.c
>> @@ -202,19 +202,20 @@ void __set_page_owner_migrate_reason(struct page *page, int reason)
>>  	page_owner->last_migrate_reason = reason;
>>  }
>>
>> -void __split_page_owner(struct page *page, unsigned int nr)
>> +void __split_page_owner(struct page *page, unsigned short old_order,
>> +			unsigned short new_order)
>
> And short again here. Please, make it consistent.
>
> Other than that, looks good to me. Please, feel free to add
> Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
> after fixing the type inconsistency.

Sure. Will fix all the inconsistent types. Thanks.


--
Best Regards,
Yan, Zi

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 854 bytes --]

Re: [RFC PATCH 2/5] mm: page_owner: add support for splitting to any order in split page_owner.

[Zi Yan]

[-- Attachment #1: Type: text/plain, Size: 4841 bytes --]

On 21 Mar 2022, at 15:02, Roman Gushchin wrote:

> On Mon, Mar 21, 2022 at 10:21:25AM -0400, Zi Yan wrote:
>> From: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>>
>> It adds a new_order parameter to set new page order in page owner and
>> uses old_order instead of nr to make the parameters look consistent.
>> It prepares for upcoming changes to support split huge page to any
>> lower order.
>>
>> Signed-off-by: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>> ---
>>  include/linux/page_owner.h | 12 +++++++-----
>>  mm/huge_memory.c           |  3 ++-
>>  mm/page_alloc.c            |  2 +-
>>  mm/page_owner.c            | 13 +++++++------
>>  4 files changed, 17 insertions(+), 13 deletions(-)
>>
>> diff --git a/include/linux/page_owner.h b/include/linux/page_owner.h
>> index 119a0c9d2a8b..16050cc89274 100644
>> --- a/include/linux/page_owner.h
>> +++ b/include/linux/page_owner.h
>> @@ -11,7 +11,8 @@ extern struct page_ext_operations page_owner_ops;
>>  extern void __reset_page_owner(struct page *page, unsigned short order);
>>  extern void __set_page_owner(struct page *page,
>>  			unsigned short order, gfp_t gfp_mask);
>> -extern void __split_page_owner(struct page *page, unsigned int nr);
>> +extern void __split_page_owner(struct page *page, unsigned short old_order,
>> +			unsigned short new_order);
>
> Unsigned short here,
>
>>  extern void __folio_copy_owner(struct folio *newfolio, struct folio *old);
>>  extern void __set_page_owner_migrate_reason(struct page *page, int reason);
>>  extern void __dump_page_owner(const struct page *page);
>> @@ -31,10 +32,11 @@ static inline void set_page_owner(struct page *page,
>>  		__set_page_owner(page, order, gfp_mask);
>>  }
>>
>> -static inline void split_page_owner(struct page *page, unsigned int nr)
>> +static inline void split_page_owner(struct page *page, unsigned int old_order,
>> +			unsigned int new_order)
>
> but unsigned int here.
>
>>  {
>>  	if (static_branch_unlikely(&page_owner_inited))
>> -		__split_page_owner(page, nr);
>> +		__split_page_owner(page, old_order, new_order);
>>  }
>>  static inline void folio_copy_owner(struct folio *newfolio, struct folio *old)
>>  {
>> @@ -56,11 +58,11 @@ static inline void reset_page_owner(struct page *page, unsigned short order)
>>  {
>>  }
>>  static inline void set_page_owner(struct page *page,
>> -			unsigned int order, gfp_t gfp_mask)
>> +			unsigned short order, gfp_t gfp_mask)
>>  {
>>  }
>>  static inline void split_page_owner(struct page *page,
>> -			unsigned short order)
>> +			unsigned short old_order, unsigned short new_order)
>>  {
>>  }
>>  static inline void folio_copy_owner(struct folio *newfolio, struct folio *folio)
>> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
>> index 640040c386f0..fcfa46af6c4c 100644
>> --- a/mm/huge_memory.c
>> +++ b/mm/huge_memory.c
>> @@ -2367,6 +2367,7 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>>  	struct lruvec *lruvec;
>>  	struct address_space *swap_cache = NULL;
>>  	unsigned long offset = 0;
>> +	unsigned int order = thp_order(head);
>>  	unsigned int nr = thp_nr_pages(head);
>>  	int i;
>>
>> @@ -2408,7 +2409,7 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>>  	unlock_page_lruvec(lruvec);
>>  	/* Caller disabled irqs, so they are still disabled here */
>>
>> -	split_page_owner(head, nr);
>> +	split_page_owner(head, order, 0);
>>
>>  	/* See comment in __split_huge_page_tail() */
>>  	if (PageAnon(head)) {
>> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
>> index d982919b9e51..9cac40c26c58 100644
>> --- a/mm/page_alloc.c
>> +++ b/mm/page_alloc.c
>> @@ -3514,7 +3514,7 @@ void split_page(struct page *page, unsigned int order)
>>
>>  	for (i = 1; i < (1 << order); i++)
>>  		set_page_refcounted(page + i);
>> -	split_page_owner(page, 1 << order);
>> +	split_page_owner(page, order, 0);
>>  	split_page_memcg(page, 1 << order, 0);
>>  }
>>  EXPORT_SYMBOL_GPL(split_page);
>> diff --git a/mm/page_owner.c b/mm/page_owner.c
>> index 0a9588506571..52013c846d19 100644
>> --- a/mm/page_owner.c
>> +++ b/mm/page_owner.c
>> @@ -202,19 +202,20 @@ void __set_page_owner_migrate_reason(struct page *page, int reason)
>>  	page_owner->last_migrate_reason = reason;
>>  }
>>
>> -void __split_page_owner(struct page *page, unsigned int nr)
>> +void __split_page_owner(struct page *page, unsigned short old_order,
>> +			unsigned short new_order)
>
> And short again here. Please, make it consistent.
>
> Other than that, looks good to me. Please, feel free to add
> Reviewed-by: Roman Gushchin <roman.gushchin-fxUVXftIFDnyG1zEObXtfA@public.gmane.org>
> after fixing the type inconsistency.

Sure. Will fix all the inconsistent types. Thanks.

[RFC PATCH 3/5] mm: thp: split huge page to any lower order pages.

[Zi Yan]

From: Zi Yan <ziy@nvidia.com>

To split a THP to any lower order pages, we need to reform THPs on
subpages at given order and add page refcount based on the new page
order. Also we need to reinitialize page_deferred_list after removing
the page from the split_queue, otherwise a subsequent split will see
list corruption when checking the page_deferred_list again.

It has many uses, like minimizing the number of pages after
truncating a pagecache THP. For anonymous THPs, we can only split them
to order-0 like before until we add support for any size anonymous THPs.

Signed-off-by: Zi Yan <ziy@nvidia.com>
---
 include/linux/huge_mm.h |   8 +++
 mm/huge_memory.c        | 111 ++++++++++++++++++++++++++++++----------
 2 files changed, 91 insertions(+), 28 deletions(-)

diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
index 2999190adc22..c7153cd7e9e4 100644
--- a/include/linux/huge_mm.h
+++ b/include/linux/huge_mm.h
@@ -186,6 +186,8 @@ void free_transhuge_page(struct page *page);
 
 bool can_split_folio(struct folio *folio, int *pextra_pins);
 int split_huge_page_to_list(struct page *page, struct list_head *list);
+int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
+		unsigned int new_order);
 static inline int split_huge_page(struct page *page)
 {
 	return split_huge_page_to_list(page, NULL);
@@ -355,6 +357,12 @@ split_huge_page_to_list(struct page *page, struct list_head *list)
 {
 	return 0;
 }
+static inline int
+split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
+		unsigned int new_order)
+{
+	return 0;
+}
 static inline int split_huge_page(struct page *page)
 {
 	return 0;
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index fcfa46af6c4c..3617aa3ad0b1 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2236,11 +2236,13 @@ void vma_adjust_trans_huge(struct vm_area_struct *vma,
 static void unmap_page(struct page *page)
 {
 	struct folio *folio = page_folio(page);
-	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SPLIT_HUGE_PMD |
-		TTU_SYNC;
+	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SYNC;
 
 	VM_BUG_ON_PAGE(!PageHead(page), page);
 
+	if (folio_order(folio) >= HPAGE_PMD_ORDER)
+		ttu_flags |= TTU_SPLIT_HUGE_PMD;
+
 	/*
 	 * Anon pages need migration entries to preserve them, but file
 	 * pages can simply be left unmapped, then faulted back on demand.
@@ -2254,9 +2256,9 @@ static void unmap_page(struct page *page)
 	VM_WARN_ON_ONCE_PAGE(page_mapped(page), page);
 }
 
-static void remap_page(struct folio *folio, unsigned long nr)
+static void remap_page(struct folio *folio, unsigned short nr)
 {
-	int i = 0;
+	unsigned int i;
 
 	/* If unmap_page() uses try_to_migrate() on file, remove this check */
 	if (!folio_test_anon(folio))
@@ -2274,7 +2276,6 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
 		struct lruvec *lruvec, struct list_head *list)
 {
 	VM_BUG_ON_PAGE(!PageHead(head), head);
-	VM_BUG_ON_PAGE(PageCompound(tail), head);
 	VM_BUG_ON_PAGE(PageLRU(tail), head);
 	lockdep_assert_held(&lruvec->lru_lock);
 
@@ -2295,9 +2296,10 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
 }
 
 static void __split_huge_page_tail(struct page *head, int tail,
-		struct lruvec *lruvec, struct list_head *list)
+		struct lruvec *lruvec, struct list_head *list, unsigned int new_order)
 {
 	struct page *page_tail = head + tail;
+	unsigned long compound_head_flag = new_order ? (1L << PG_head) : 0;
 
 	VM_BUG_ON_PAGE(atomic_read(&page_tail->_mapcount) != -1, page_tail);
 
@@ -2321,6 +2323,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
 #ifdef CONFIG_64BIT
 			 (1L << PG_arch_2) |
 #endif
+			 compound_head_flag |
 			 (1L << PG_dirty)));
 
 	/* ->mapping in first tail page is compound_mapcount */
@@ -2329,7 +2332,10 @@ static void __split_huge_page_tail(struct page *head, int tail,
 	page_tail->mapping = head->mapping;
 	page_tail->index = head->index + tail;
 
-	/* Page flags must be visible before we make the page non-compound. */
+	/*
+	 * Page flags must be visible before we make the page non-compound or
+	 * a compound page in new_order.
+	 */
 	smp_wmb();
 
 	/*
@@ -2339,10 +2345,15 @@ static void __split_huge_page_tail(struct page *head, int tail,
 	 * which needs correct compound_head().
 	 */
 	clear_compound_head(page_tail);
+	if (new_order) {
+		prep_compound_page(page_tail, new_order);
+		prep_transhuge_page(page_tail);
+	}
 
 	/* Finally unfreeze refcount. Additional reference from page cache. */
-	page_ref_unfreeze(page_tail, 1 + (!PageAnon(head) ||
-					  PageSwapCache(head)));
+	page_ref_unfreeze(page_tail, 1 + ((!PageAnon(head) ||
+					   PageSwapCache(head)) ?
+						thp_nr_pages(page_tail) : 0));
 
 	if (page_is_young(head))
 		set_page_young(page_tail);
@@ -2360,7 +2371,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
 }
 
 static void __split_huge_page(struct page *page, struct list_head *list,
-		pgoff_t end)
+		pgoff_t end, unsigned int new_order)
 {
 	struct folio *folio = page_folio(page);
 	struct page *head = &folio->page;
@@ -2369,10 +2380,11 @@ static void __split_huge_page(struct page *page, struct list_head *list,
 	unsigned long offset = 0;
 	unsigned int order = thp_order(head);
 	unsigned int nr = thp_nr_pages(head);
+	unsigned int new_nr = 1 << new_order;
 	int i;
 
 	/* complete memcg works before add pages to LRU */
-	split_page_memcg(head, nr, 0);
+	split_page_memcg(head, nr, new_order);
 
 	if (PageAnon(head) && PageSwapCache(head)) {
 		swp_entry_t entry = { .val = page_private(head) };
@@ -2387,42 +2399,50 @@ static void __split_huge_page(struct page *page, struct list_head *list,
 
 	ClearPageHasHWPoisoned(head);
 
-	for (i = nr - 1; i >= 1; i--) {
-		__split_huge_page_tail(head, i, lruvec, list);
+	for (i = nr - new_nr; i >= new_nr; i -= new_nr) {
+		__split_huge_page_tail(head, i, lruvec, list, new_order);
 		/* Some pages can be beyond EOF: drop them from page cache */
 		if (head[i].index >= end) {
 			ClearPageDirty(head + i);
 			__delete_from_page_cache(head + i, NULL);
 			if (shmem_mapping(head->mapping))
-				shmem_uncharge(head->mapping->host, 1);
+				shmem_uncharge(head->mapping->host, new_nr);
 			put_page(head + i);
 		} else if (!PageAnon(page)) {
 			__xa_store(&head->mapping->i_pages, head[i].index,
 					head + i, 0);
 		} else if (swap_cache) {
+			/*
+			 * split anonymous THPs (including swapped out ones) to
+			 * non-zero order not supported
+			 */
+			VM_BUG_ON(new_order);
 			__xa_store(&swap_cache->i_pages, offset + i,
 					head + i, 0);
 		}
 	}
 
-	ClearPageCompound(head);
+	if (!new_order)
+		ClearPageCompound(head);
+	else
+		set_compound_order(head, new_order);
 	unlock_page_lruvec(lruvec);
 	/* Caller disabled irqs, so they are still disabled here */
 
-	split_page_owner(head, order, 0);
+	split_page_owner(head, order, new_order);
 
 	/* See comment in __split_huge_page_tail() */
 	if (PageAnon(head)) {
 		/* Additional pin to swap cache */
 		if (PageSwapCache(head)) {
-			page_ref_add(head, 2);
+			page_ref_add(head, 1 + new_nr);
 			xa_unlock(&swap_cache->i_pages);
 		} else {
 			page_ref_inc(head);
 		}
 	} else {
 		/* Additional pin to page cache */
-		page_ref_add(head, 2);
+		page_ref_add(head, 1 + new_nr);
 		xa_unlock(&head->mapping->i_pages);
 	}
 	local_irq_enable();
@@ -2435,7 +2455,14 @@ static void __split_huge_page(struct page *page, struct list_head *list,
 		split_swap_cluster(entry);
 	}
 
-	for (i = 0; i < nr; i++) {
+	/*
+	 * set page to its compound_head when split to THPs, so that GUP pin and
+	 * PG_locked are transferred to the right after-split page
+	 */
+	if (new_order)
+		page = compound_head(page);
+
+	for (i = 0; i < nr; i += new_nr) {
 		struct page *subpage = head + i;
 		if (subpage == page)
 			continue;
@@ -2472,36 +2499,60 @@ bool can_split_folio(struct folio *folio, int *pextra_pins)
  * This function splits huge page into normal pages. @page can point to any
  * subpage of huge page to split. Split doesn't change the position of @page.
  *
+ * See split_huge_page_to_list_to_order() for more details.
+ *
+ * Returns 0 if the hugepage is split successfully.
+ * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
+ * us.
+ */
+int split_huge_page_to_list(struct page *page, struct list_head *list)
+{
+	return split_huge_page_to_list_to_order(page, list, 0);
+}
+
+/*
+ * This function splits huge page into pages in @new_order. @page can point to
+ * any subpage of huge page to split. Split doesn't change the position of
+ * @page.
+ *
  * Only caller must hold pin on the @page, otherwise split fails with -EBUSY.
  * The huge page must be locked.
  *
  * If @list is null, tail pages will be added to LRU list, otherwise, to @list.
  *
- * Both head page and tail pages will inherit mapping, flags, and so on from
- * the hugepage.
+ * Pages in new_order will inherit mapping, flags, and so on from the hugepage.
  *
- * GUP pin and PG_locked transferred to @page. Rest subpages can be freed if
- * they are not mapped.
+ * GUP pin and PG_locked transferred to @page or the compound page @page belongs
+ * to. Rest subpages can be freed if they are not mapped.
  *
  * Returns 0 if the hugepage is split successfully.
  * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
  * us.
  */
-int split_huge_page_to_list(struct page *page, struct list_head *list)
+int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
+				     unsigned int new_order)
 {
 	struct folio *folio = page_folio(page);
 	struct page *head = &folio->page;
 	struct deferred_split *ds_queue = get_deferred_split_queue(head);
-	XA_STATE(xas, &head->mapping->i_pages, head->index);
+	/* reset xarray order to new order after split */
+	XA_STATE_ORDER(xas, &head->mapping->i_pages, head->index, new_order);
 	struct anon_vma *anon_vma = NULL;
 	struct address_space *mapping = NULL;
 	int extra_pins, ret;
 	pgoff_t end;
 
+	VM_BUG_ON(thp_order(head) <= new_order);
 	VM_BUG_ON_PAGE(is_huge_zero_page(head), head);
 	VM_BUG_ON_PAGE(!PageLocked(head), head);
 	VM_BUG_ON_PAGE(!PageCompound(head), head);
 
+	/* Cannot split THP to order-1 (no order-1 THPs) */
+	VM_BUG_ON(new_order == 1);
+
+	/* Split anonymous THP to non-zero order not support */
+	VM_BUG_ON(PageAnon(head) && new_order);
+
 	if (PageWriteback(head))
 		return -EBUSY;
 
@@ -2582,7 +2633,7 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
 	if (page_ref_freeze(head, 1 + extra_pins)) {
 		if (!list_empty(page_deferred_list(head))) {
 			ds_queue->split_queue_len--;
-			list_del(page_deferred_list(head));
+			list_del_init(page_deferred_list(head));
 		}
 		spin_unlock(&ds_queue->split_queue_lock);
 		if (mapping) {
@@ -2592,14 +2643,18 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
 			if (PageSwapBacked(head)) {
 				__mod_lruvec_page_state(head, NR_SHMEM_THPS,
 							-nr);
-			} else {
+			} else if (!new_order) {
+				/*
+				 * Decrease THP stats only if split to normal
+				 * pages
+				 */
 				__mod_lruvec_page_state(head, NR_FILE_THPS,
 							-nr);
 				filemap_nr_thps_dec(mapping);
 			}
 		}
 
-		__split_huge_page(page, list, end);
+		__split_huge_page(page, list, end, new_order);
 		ret = 0;
 	} else {
 		spin_unlock(&ds_queue->split_queue_lock);
-- 
2.35.1

[RFC PATCH 3/5] mm: thp: split huge page to any lower order pages.

[Zi Yan]

From: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

To split a THP to any lower order pages, we need to reform THPs on
subpages at given order and add page refcount based on the new page
order. Also we need to reinitialize page_deferred_list after removing
the page from the split_queue, otherwise a subsequent split will see
list corruption when checking the page_deferred_list again.

It has many uses, like minimizing the number of pages after
truncating a pagecache THP. For anonymous THPs, we can only split them
to order-0 like before until we add support for any size anonymous THPs.

Signed-off-by: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 include/linux/huge_mm.h |   8 +++
 mm/huge_memory.c        | 111 ++++++++++++++++++++++++++++++----------
 2 files changed, 91 insertions(+), 28 deletions(-)

diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
index 2999190adc22..c7153cd7e9e4 100644
--- a/include/linux/huge_mm.h
+++ b/include/linux/huge_mm.h
@@ -186,6 +186,8 @@ void free_transhuge_page(struct page *page);
 
 bool can_split_folio(struct folio *folio, int *pextra_pins);
 int split_huge_page_to_list(struct page *page, struct list_head *list);
+int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
+		unsigned int new_order);
 static inline int split_huge_page(struct page *page)
 {
 	return split_huge_page_to_list(page, NULL);
@@ -355,6 +357,12 @@ split_huge_page_to_list(struct page *page, struct list_head *list)
 {
 	return 0;
 }
+static inline int
+split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
+		unsigned int new_order)
+{
+	return 0;
+}
 static inline int split_huge_page(struct page *page)
 {
 	return 0;
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index fcfa46af6c4c..3617aa3ad0b1 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2236,11 +2236,13 @@ void vma_adjust_trans_huge(struct vm_area_struct *vma,
 static void unmap_page(struct page *page)
 {
 	struct folio *folio = page_folio(page);
-	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SPLIT_HUGE_PMD |
-		TTU_SYNC;
+	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SYNC;
 
 	VM_BUG_ON_PAGE(!PageHead(page), page);
 
+	if (folio_order(folio) >= HPAGE_PMD_ORDER)
+		ttu_flags |= TTU_SPLIT_HUGE_PMD;
+
 	/*
 	 * Anon pages need migration entries to preserve them, but file
 	 * pages can simply be left unmapped, then faulted back on demand.
@@ -2254,9 +2256,9 @@ static void unmap_page(struct page *page)
 	VM_WARN_ON_ONCE_PAGE(page_mapped(page), page);
 }
 
-static void remap_page(struct folio *folio, unsigned long nr)
+static void remap_page(struct folio *folio, unsigned short nr)
 {
-	int i = 0;
+	unsigned int i;
 
 	/* If unmap_page() uses try_to_migrate() on file, remove this check */
 	if (!folio_test_anon(folio))
@@ -2274,7 +2276,6 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
 		struct lruvec *lruvec, struct list_head *list)
 {
 	VM_BUG_ON_PAGE(!PageHead(head), head);
-	VM_BUG_ON_PAGE(PageCompound(tail), head);
 	VM_BUG_ON_PAGE(PageLRU(tail), head);
 	lockdep_assert_held(&lruvec->lru_lock);
 
@@ -2295,9 +2296,10 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
 }
 
 static void __split_huge_page_tail(struct page *head, int tail,
-		struct lruvec *lruvec, struct list_head *list)
+		struct lruvec *lruvec, struct list_head *list, unsigned int new_order)
 {
 	struct page *page_tail = head + tail;
+	unsigned long compound_head_flag = new_order ? (1L << PG_head) : 0;
 
 	VM_BUG_ON_PAGE(atomic_read(&page_tail->_mapcount) != -1, page_tail);
 
@@ -2321,6 +2323,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
 #ifdef CONFIG_64BIT
 			 (1L << PG_arch_2) |
 #endif
+			 compound_head_flag |
 			 (1L << PG_dirty)));
 
 	/* ->mapping in first tail page is compound_mapcount */
@@ -2329,7 +2332,10 @@ static void __split_huge_page_tail(struct page *head, int tail,
 	page_tail->mapping = head->mapping;
 	page_tail->index = head->index + tail;
 
-	/* Page flags must be visible before we make the page non-compound. */
+	/*
+	 * Page flags must be visible before we make the page non-compound or
+	 * a compound page in new_order.
+	 */
 	smp_wmb();
 
 	/*
@@ -2339,10 +2345,15 @@ static void __split_huge_page_tail(struct page *head, int tail,
 	 * which needs correct compound_head().
 	 */
 	clear_compound_head(page_tail);
+	if (new_order) {
+		prep_compound_page(page_tail, new_order);
+		prep_transhuge_page(page_tail);
+	}
 
 	/* Finally unfreeze refcount. Additional reference from page cache. */
-	page_ref_unfreeze(page_tail, 1 + (!PageAnon(head) ||
-					  PageSwapCache(head)));
+	page_ref_unfreeze(page_tail, 1 + ((!PageAnon(head) ||
+					   PageSwapCache(head)) ?
+						thp_nr_pages(page_tail) : 0));
 
 	if (page_is_young(head))
 		set_page_young(page_tail);
@@ -2360,7 +2371,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
 }
 
 static void __split_huge_page(struct page *page, struct list_head *list,
-		pgoff_t end)
+		pgoff_t end, unsigned int new_order)
 {
 	struct folio *folio = page_folio(page);
 	struct page *head = &folio->page;
@@ -2369,10 +2380,11 @@ static void __split_huge_page(struct page *page, struct list_head *list,
 	unsigned long offset = 0;
 	unsigned int order = thp_order(head);
 	unsigned int nr = thp_nr_pages(head);
+	unsigned int new_nr = 1 << new_order;
 	int i;
 
 	/* complete memcg works before add pages to LRU */
-	split_page_memcg(head, nr, 0);
+	split_page_memcg(head, nr, new_order);
 
 	if (PageAnon(head) && PageSwapCache(head)) {
 		swp_entry_t entry = { .val = page_private(head) };
@@ -2387,42 +2399,50 @@ static void __split_huge_page(struct page *page, struct list_head *list,
 
 	ClearPageHasHWPoisoned(head);
 
-	for (i = nr - 1; i >= 1; i--) {
-		__split_huge_page_tail(head, i, lruvec, list);
+	for (i = nr - new_nr; i >= new_nr; i -= new_nr) {
+		__split_huge_page_tail(head, i, lruvec, list, new_order);
 		/* Some pages can be beyond EOF: drop them from page cache */
 		if (head[i].index >= end) {
 			ClearPageDirty(head + i);
 			__delete_from_page_cache(head + i, NULL);
 			if (shmem_mapping(head->mapping))
-				shmem_uncharge(head->mapping->host, 1);
+				shmem_uncharge(head->mapping->host, new_nr);
 			put_page(head + i);
 		} else if (!PageAnon(page)) {
 			__xa_store(&head->mapping->i_pages, head[i].index,
 					head + i, 0);
 		} else if (swap_cache) {
+			/*
+			 * split anonymous THPs (including swapped out ones) to
+			 * non-zero order not supported
+			 */
+			VM_BUG_ON(new_order);
 			__xa_store(&swap_cache->i_pages, offset + i,
 					head + i, 0);
 		}
 	}
 
-	ClearPageCompound(head);
+	if (!new_order)
+		ClearPageCompound(head);
+	else
+		set_compound_order(head, new_order);
 	unlock_page_lruvec(lruvec);
 	/* Caller disabled irqs, so they are still disabled here */
 
-	split_page_owner(head, order, 0);
+	split_page_owner(head, order, new_order);
 
 	/* See comment in __split_huge_page_tail() */
 	if (PageAnon(head)) {
 		/* Additional pin to swap cache */
 		if (PageSwapCache(head)) {
-			page_ref_add(head, 2);
+			page_ref_add(head, 1 + new_nr);
 			xa_unlock(&swap_cache->i_pages);
 		} else {
 			page_ref_inc(head);
 		}
 	} else {
 		/* Additional pin to page cache */
-		page_ref_add(head, 2);
+		page_ref_add(head, 1 + new_nr);
 		xa_unlock(&head->mapping->i_pages);
 	}
 	local_irq_enable();
@@ -2435,7 +2455,14 @@ static void __split_huge_page(struct page *page, struct list_head *list,
 		split_swap_cluster(entry);
 	}
 
-	for (i = 0; i < nr; i++) {
+	/*
+	 * set page to its compound_head when split to THPs, so that GUP pin and
+	 * PG_locked are transferred to the right after-split page
+	 */
+	if (new_order)
+		page = compound_head(page);
+
+	for (i = 0; i < nr; i += new_nr) {
 		struct page *subpage = head + i;
 		if (subpage == page)
 			continue;
@@ -2472,36 +2499,60 @@ bool can_split_folio(struct folio *folio, int *pextra_pins)
  * This function splits huge page into normal pages. @page can point to any
  * subpage of huge page to split. Split doesn't change the position of @page.
  *
+ * See split_huge_page_to_list_to_order() for more details.
+ *
+ * Returns 0 if the hugepage is split successfully.
+ * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
+ * us.
+ */
+int split_huge_page_to_list(struct page *page, struct list_head *list)
+{
+	return split_huge_page_to_list_to_order(page, list, 0);
+}
+
+/*
+ * This function splits huge page into pages in @new_order. @page can point to
+ * any subpage of huge page to split. Split doesn't change the position of
+ * @page.
+ *
  * Only caller must hold pin on the @page, otherwise split fails with -EBUSY.
  * The huge page must be locked.
  *
  * If @list is null, tail pages will be added to LRU list, otherwise, to @list.
  *
- * Both head page and tail pages will inherit mapping, flags, and so on from
- * the hugepage.
+ * Pages in new_order will inherit mapping, flags, and so on from the hugepage.
  *
- * GUP pin and PG_locked transferred to @page. Rest subpages can be freed if
- * they are not mapped.
+ * GUP pin and PG_locked transferred to @page or the compound page @page belongs
+ * to. Rest subpages can be freed if they are not mapped.
  *
  * Returns 0 if the hugepage is split successfully.
  * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
  * us.
  */
-int split_huge_page_to_list(struct page *page, struct list_head *list)
+int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
+				     unsigned int new_order)
 {
 	struct folio *folio = page_folio(page);
 	struct page *head = &folio->page;
 	struct deferred_split *ds_queue = get_deferred_split_queue(head);
-	XA_STATE(xas, &head->mapping->i_pages, head->index);
+	/* reset xarray order to new order after split */
+	XA_STATE_ORDER(xas, &head->mapping->i_pages, head->index, new_order);
 	struct anon_vma *anon_vma = NULL;
 	struct address_space *mapping = NULL;
 	int extra_pins, ret;
 	pgoff_t end;
 
+	VM_BUG_ON(thp_order(head) <= new_order);
 	VM_BUG_ON_PAGE(is_huge_zero_page(head), head);
 	VM_BUG_ON_PAGE(!PageLocked(head), head);
 	VM_BUG_ON_PAGE(!PageCompound(head), head);
 
+	/* Cannot split THP to order-1 (no order-1 THPs) */
+	VM_BUG_ON(new_order == 1);
+
+	/* Split anonymous THP to non-zero order not support */
+	VM_BUG_ON(PageAnon(head) && new_order);
+
 	if (PageWriteback(head))
 		return -EBUSY;
 
@@ -2582,7 +2633,7 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
 	if (page_ref_freeze(head, 1 + extra_pins)) {
 		if (!list_empty(page_deferred_list(head))) {
 			ds_queue->split_queue_len--;
-			list_del(page_deferred_list(head));
+			list_del_init(page_deferred_list(head));
 		}
 		spin_unlock(&ds_queue->split_queue_lock);
 		if (mapping) {
@@ -2592,14 +2643,18 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
 			if (PageSwapBacked(head)) {
 				__mod_lruvec_page_state(head, NR_SHMEM_THPS,
 							-nr);
-			} else {
+			} else if (!new_order) {
+				/*
+				 * Decrease THP stats only if split to normal
+				 * pages
+				 */
 				__mod_lruvec_page_state(head, NR_FILE_THPS,
 							-nr);
 				filemap_nr_thps_dec(mapping);
 			}
 		}
 
-		__split_huge_page(page, list, end);
+		__split_huge_page(page, list, end, new_order);
 		ret = 0;
 	} else {
 		spin_unlock(&ds_queue->split_queue_lock);
-- 
2.35.1

Re: [RFC PATCH 3/5] mm: thp: split huge page to any lower order pages.

[Roman Gushchin]

On Mon, Mar 21, 2022 at 10:21:26AM -0400, Zi Yan wrote:
> From: Zi Yan <ziy@nvidia.com>
> 
> To split a THP to any lower order pages, we need to reform THPs on
> subpages at given order and add page refcount based on the new page
> order. Also we need to reinitialize page_deferred_list after removing
> the page from the split_queue, otherwise a subsequent split will see
> list corruption when checking the page_deferred_list again.
> 
> It has many uses, like minimizing the number of pages after
> truncating a pagecache THP. For anonymous THPs, we can only split them
> to order-0 like before until we add support for any size anonymous THPs.
> 
> Signed-off-by: Zi Yan <ziy@nvidia.com>

Overall the patch looks good to me, please, feel free to add
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
to the next version.

Couple of small nits below:

> ---
>  include/linux/huge_mm.h |   8 +++
>  mm/huge_memory.c        | 111 ++++++++++++++++++++++++++++++----------
>  2 files changed, 91 insertions(+), 28 deletions(-)
> 
> diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
> index 2999190adc22..c7153cd7e9e4 100644
> --- a/include/linux/huge_mm.h
> +++ b/include/linux/huge_mm.h
> @@ -186,6 +186,8 @@ void free_transhuge_page(struct page *page);
>  
>  bool can_split_folio(struct folio *folio, int *pextra_pins);
>  int split_huge_page_to_list(struct page *page, struct list_head *list);
> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
> +		unsigned int new_order);

Do we really need both? Maybe add the new_order argument to the existing function?
It seems like there are not so many call sites.

>  static inline int split_huge_page(struct page *page)
>  {
>  	return split_huge_page_to_list(page, NULL);
> @@ -355,6 +357,12 @@ split_huge_page_to_list(struct page *page, struct list_head *list)
>  {
>  	return 0;
>  }
> +static inline int
> +split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
> +		unsigned int new_order)
> +{
> +	return 0;
> +}
>  static inline int split_huge_page(struct page *page)
>  {
>  	return 0;
> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> index fcfa46af6c4c..3617aa3ad0b1 100644
> --- a/mm/huge_memory.c
> +++ b/mm/huge_memory.c
> @@ -2236,11 +2236,13 @@ void vma_adjust_trans_huge(struct vm_area_struct *vma,
>  static void unmap_page(struct page *page)
>  {
>  	struct folio *folio = page_folio(page);
> -	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SPLIT_HUGE_PMD |
> -		TTU_SYNC;
> +	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SYNC;
>  
>  	VM_BUG_ON_PAGE(!PageHead(page), page);
>  
> +	if (folio_order(folio) >= HPAGE_PMD_ORDER)
> +		ttu_flags |= TTU_SPLIT_HUGE_PMD;
> +
>  	/*
>  	 * Anon pages need migration entries to preserve them, but file
>  	 * pages can simply be left unmapped, then faulted back on demand.
> @@ -2254,9 +2256,9 @@ static void unmap_page(struct page *page)
>  	VM_WARN_ON_ONCE_PAGE(page_mapped(page), page);
>  }
>  
> -static void remap_page(struct folio *folio, unsigned long nr)
> +static void remap_page(struct folio *folio, unsigned short nr)
>  {
> -	int i = 0;
> +	unsigned int i;
>  
>  	/* If unmap_page() uses try_to_migrate() on file, remove this check */
>  	if (!folio_test_anon(folio))
> @@ -2274,7 +2276,6 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>  		struct lruvec *lruvec, struct list_head *list)
>  {
>  	VM_BUG_ON_PAGE(!PageHead(head), head);
> -	VM_BUG_ON_PAGE(PageCompound(tail), head);
>  	VM_BUG_ON_PAGE(PageLRU(tail), head);
>  	lockdep_assert_held(&lruvec->lru_lock);
>  
> @@ -2295,9 +2296,10 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>  }
>  
>  static void __split_huge_page_tail(struct page *head, int tail,
> -		struct lruvec *lruvec, struct list_head *list)
> +		struct lruvec *lruvec, struct list_head *list, unsigned int new_order)
>  {
>  	struct page *page_tail = head + tail;
> +	unsigned long compound_head_flag = new_order ? (1L << PG_head) : 0;
>  
>  	VM_BUG_ON_PAGE(atomic_read(&page_tail->_mapcount) != -1, page_tail);
>  
> @@ -2321,6 +2323,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>  #ifdef CONFIG_64BIT
>  			 (1L << PG_arch_2) |
>  #endif
> +			 compound_head_flag |
>  			 (1L << PG_dirty)));
>  
>  	/* ->mapping in first tail page is compound_mapcount */
> @@ -2329,7 +2332,10 @@ static void __split_huge_page_tail(struct page *head, int tail,
>  	page_tail->mapping = head->mapping;
>  	page_tail->index = head->index + tail;
>  
> -	/* Page flags must be visible before we make the page non-compound. */
> +	/*
> +	 * Page flags must be visible before we make the page non-compound or
> +	 * a compound page in new_order.
> +	 */
>  	smp_wmb();
>  
>  	/*
> @@ -2339,10 +2345,15 @@ static void __split_huge_page_tail(struct page *head, int tail,
>  	 * which needs correct compound_head().
>  	 */
>  	clear_compound_head(page_tail);
> +	if (new_order) {
> +		prep_compound_page(page_tail, new_order);
> +		prep_transhuge_page(page_tail);
> +	}
>  
>  	/* Finally unfreeze refcount. Additional reference from page cache. */
> -	page_ref_unfreeze(page_tail, 1 + (!PageAnon(head) ||
> -					  PageSwapCache(head)));
> +	page_ref_unfreeze(page_tail, 1 + ((!PageAnon(head) ||
> +					   PageSwapCache(head)) ?
> +						thp_nr_pages(page_tail) : 0));
>  
>  	if (page_is_young(head))
>  		set_page_young(page_tail);
> @@ -2360,7 +2371,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>  }
>  
>  static void __split_huge_page(struct page *page, struct list_head *list,
> -		pgoff_t end)
> +		pgoff_t end, unsigned int new_order)
>  {
>  	struct folio *folio = page_folio(page);
>  	struct page *head = &folio->page;
> @@ -2369,10 +2380,11 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>  	unsigned long offset = 0;
>  	unsigned int order = thp_order(head);
>  	unsigned int nr = thp_nr_pages(head);
> +	unsigned int new_nr = 1 << new_order;
>  	int i;
>  
>  	/* complete memcg works before add pages to LRU */
> -	split_page_memcg(head, nr, 0);
> +	split_page_memcg(head, nr, new_order);
>  
>  	if (PageAnon(head) && PageSwapCache(head)) {
>  		swp_entry_t entry = { .val = page_private(head) };
> @@ -2387,42 +2399,50 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>  
>  	ClearPageHasHWPoisoned(head);
>  
> -	for (i = nr - 1; i >= 1; i--) {
> -		__split_huge_page_tail(head, i, lruvec, list);
> +	for (i = nr - new_nr; i >= new_nr; i -= new_nr) {
> +		__split_huge_page_tail(head, i, lruvec, list, new_order);
>  		/* Some pages can be beyond EOF: drop them from page cache */
>  		if (head[i].index >= end) {
>  			ClearPageDirty(head + i);
>  			__delete_from_page_cache(head + i, NULL);
>  			if (shmem_mapping(head->mapping))
> -				shmem_uncharge(head->mapping->host, 1);
> +				shmem_uncharge(head->mapping->host, new_nr);
>  			put_page(head + i);
>  		} else if (!PageAnon(page)) {
>  			__xa_store(&head->mapping->i_pages, head[i].index,
>  					head + i, 0);
>  		} else if (swap_cache) {
> +			/*
> +			 * split anonymous THPs (including swapped out ones) to
> +			 * non-zero order not supported
> +			 */
> +			VM_BUG_ON(new_order);
>  			__xa_store(&swap_cache->i_pages, offset + i,
>  					head + i, 0);
>  		}
>  	}
>  
> -	ClearPageCompound(head);
> +	if (!new_order)
> +		ClearPageCompound(head);
> +	else
> +		set_compound_order(head, new_order);
>  	unlock_page_lruvec(lruvec);
>  	/* Caller disabled irqs, so they are still disabled here */
>  
> -	split_page_owner(head, order, 0);
> +	split_page_owner(head, order, new_order);
>  
>  	/* See comment in __split_huge_page_tail() */
>  	if (PageAnon(head)) {
>  		/* Additional pin to swap cache */
>  		if (PageSwapCache(head)) {
> -			page_ref_add(head, 2);
> +			page_ref_add(head, 1 + new_nr);
>  			xa_unlock(&swap_cache->i_pages);
>  		} else {
>  			page_ref_inc(head);
>  		}
>  	} else {
>  		/* Additional pin to page cache */
> -		page_ref_add(head, 2);
> +		page_ref_add(head, 1 + new_nr);
>  		xa_unlock(&head->mapping->i_pages);
>  	}
>  	local_irq_enable();
> @@ -2435,7 +2455,14 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>  		split_swap_cluster(entry);
>  	}
>  
> -	for (i = 0; i < nr; i++) {
> +	/*
> +	 * set page to its compound_head when split to THPs, so that GUP pin and
> +	 * PG_locked are transferred to the right after-split page
> +	 */
> +	if (new_order)
> +		page = compound_head(page);
> +
> +	for (i = 0; i < nr; i += new_nr) {
>  		struct page *subpage = head + i;
>  		if (subpage == page)
>  			continue;
> @@ -2472,36 +2499,60 @@ bool can_split_folio(struct folio *folio, int *pextra_pins)
>   * This function splits huge page into normal pages. @page can point to any
>   * subpage of huge page to split. Split doesn't change the position of @page.
>   *
> + * See split_huge_page_to_list_to_order() for more details.
> + *
> + * Returns 0 if the hugepage is split successfully.
> + * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
> + * us.
> + */
> +int split_huge_page_to_list(struct page *page, struct list_head *list)
> +{
> +	return split_huge_page_to_list_to_order(page, list, 0);
> +}
> +
> +/*
> + * This function splits huge page into pages in @new_order. @page can point to
> + * any subpage of huge page to split. Split doesn't change the position of
> + * @page.
> + *
>   * Only caller must hold pin on the @page, otherwise split fails with -EBUSY.
>   * The huge page must be locked.
>   *
>   * If @list is null, tail pages will be added to LRU list, otherwise, to @list.
>   *
> - * Both head page and tail pages will inherit mapping, flags, and so on from
> - * the hugepage.
> + * Pages in new_order will inherit mapping, flags, and so on from the hugepage.
>   *
> - * GUP pin and PG_locked transferred to @page. Rest subpages can be freed if
> - * they are not mapped.
> + * GUP pin and PG_locked transferred to @page or the compound page @page belongs
> + * to. Rest subpages can be freed if they are not mapped.
>   *
>   * Returns 0 if the hugepage is split successfully.
>   * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
>   * us.
>   */
> -int split_huge_page_to_list(struct page *page, struct list_head *list)
> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
> +				     unsigned int new_order)
>  {
>  	struct folio *folio = page_folio(page);
>  	struct page *head = &folio->page;
>  	struct deferred_split *ds_queue = get_deferred_split_queue(head);
> -	XA_STATE(xas, &head->mapping->i_pages, head->index);
> +	/* reset xarray order to new order after split */
> +	XA_STATE_ORDER(xas, &head->mapping->i_pages, head->index, new_order);
>  	struct anon_vma *anon_vma = NULL;
>  	struct address_space *mapping = NULL;
>  	int extra_pins, ret;
>  	pgoff_t end;
>  
> +	VM_BUG_ON(thp_order(head) <= new_order);
>  	VM_BUG_ON_PAGE(is_huge_zero_page(head), head);
>  	VM_BUG_ON_PAGE(!PageLocked(head), head);
>  	VM_BUG_ON_PAGE(!PageCompound(head), head);
>  
> +	/* Cannot split THP to order-1 (no order-1 THPs) */
> +	VM_BUG_ON(new_order == 1);
> +
> +	/* Split anonymous THP to non-zero order not support */
> +	VM_BUG_ON(PageAnon(head) && new_order);
> +
>  	if (PageWriteback(head))
>  		return -EBUSY;
>  
> @@ -2582,7 +2633,7 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
>  	if (page_ref_freeze(head, 1 + extra_pins)) {
>  		if (!list_empty(page_deferred_list(head))) {
>  			ds_queue->split_queue_len--;
> -			list_del(page_deferred_list(head));
> +			list_del_init(page_deferred_list(head));

Can you, please, add the comment from the changelog here as well?

Thanks!

Re: [RFC PATCH 3/5] mm: thp: split huge page to any lower order pages.

[Roman Gushchin]

On Mon, Mar 21, 2022 at 10:21:26AM -0400, Zi Yan wrote:
> From: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> 
> To split a THP to any lower order pages, we need to reform THPs on
> subpages at given order and add page refcount based on the new page
> order. Also we need to reinitialize page_deferred_list after removing
> the page from the split_queue, otherwise a subsequent split will see
> list corruption when checking the page_deferred_list again.
> 
> It has many uses, like minimizing the number of pages after
> truncating a pagecache THP. For anonymous THPs, we can only split them
> to order-0 like before until we add support for any size anonymous THPs.
> 
> Signed-off-by: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

Overall the patch looks good to me, please, feel free to add
Reviewed-by: Roman Gushchin <roman.gushchin-fxUVXftIFDnyG1zEObXtfA@public.gmane.org>
to the next version.

Couple of small nits below:

> ---
>  include/linux/huge_mm.h |   8 +++
>  mm/huge_memory.c        | 111 ++++++++++++++++++++++++++++++----------
>  2 files changed, 91 insertions(+), 28 deletions(-)
> 
> diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
> index 2999190adc22..c7153cd7e9e4 100644
> --- a/include/linux/huge_mm.h
> +++ b/include/linux/huge_mm.h
> @@ -186,6 +186,8 @@ void free_transhuge_page(struct page *page);
>  
>  bool can_split_folio(struct folio *folio, int *pextra_pins);
>  int split_huge_page_to_list(struct page *page, struct list_head *list);
> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
> +		unsigned int new_order);

Do we really need both? Maybe add the new_order argument to the existing function?
It seems like there are not so many call sites.

>  static inline int split_huge_page(struct page *page)
>  {
>  	return split_huge_page_to_list(page, NULL);
> @@ -355,6 +357,12 @@ split_huge_page_to_list(struct page *page, struct list_head *list)
>  {
>  	return 0;
>  }
> +static inline int
> +split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
> +		unsigned int new_order)
> +{
> +	return 0;
> +}
>  static inline int split_huge_page(struct page *page)
>  {
>  	return 0;
> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> index fcfa46af6c4c..3617aa3ad0b1 100644
> --- a/mm/huge_memory.c
> +++ b/mm/huge_memory.c
> @@ -2236,11 +2236,13 @@ void vma_adjust_trans_huge(struct vm_area_struct *vma,
>  static void unmap_page(struct page *page)
>  {
>  	struct folio *folio = page_folio(page);
> -	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SPLIT_HUGE_PMD |
> -		TTU_SYNC;
> +	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SYNC;
>  
>  	VM_BUG_ON_PAGE(!PageHead(page), page);
>  
> +	if (folio_order(folio) >= HPAGE_PMD_ORDER)
> +		ttu_flags |= TTU_SPLIT_HUGE_PMD;
> +
>  	/*
>  	 * Anon pages need migration entries to preserve them, but file
>  	 * pages can simply be left unmapped, then faulted back on demand.
> @@ -2254,9 +2256,9 @@ static void unmap_page(struct page *page)
>  	VM_WARN_ON_ONCE_PAGE(page_mapped(page), page);
>  }
>  
> -static void remap_page(struct folio *folio, unsigned long nr)
> +static void remap_page(struct folio *folio, unsigned short nr)
>  {
> -	int i = 0;
> +	unsigned int i;
>  
>  	/* If unmap_page() uses try_to_migrate() on file, remove this check */
>  	if (!folio_test_anon(folio))
> @@ -2274,7 +2276,6 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>  		struct lruvec *lruvec, struct list_head *list)
>  {
>  	VM_BUG_ON_PAGE(!PageHead(head), head);
> -	VM_BUG_ON_PAGE(PageCompound(tail), head);
>  	VM_BUG_ON_PAGE(PageLRU(tail), head);
>  	lockdep_assert_held(&lruvec->lru_lock);
>  
> @@ -2295,9 +2296,10 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>  }
>  
>  static void __split_huge_page_tail(struct page *head, int tail,
> -		struct lruvec *lruvec, struct list_head *list)
> +		struct lruvec *lruvec, struct list_head *list, unsigned int new_order)
>  {
>  	struct page *page_tail = head + tail;
> +	unsigned long compound_head_flag = new_order ? (1L << PG_head) : 0;
>  
>  	VM_BUG_ON_PAGE(atomic_read(&page_tail->_mapcount) != -1, page_tail);
>  
> @@ -2321,6 +2323,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>  #ifdef CONFIG_64BIT
>  			 (1L << PG_arch_2) |
>  #endif
> +			 compound_head_flag |
>  			 (1L << PG_dirty)));
>  
>  	/* ->mapping in first tail page is compound_mapcount */
> @@ -2329,7 +2332,10 @@ static void __split_huge_page_tail(struct page *head, int tail,
>  	page_tail->mapping = head->mapping;
>  	page_tail->index = head->index + tail;
>  
> -	/* Page flags must be visible before we make the page non-compound. */
> +	/*
> +	 * Page flags must be visible before we make the page non-compound or
> +	 * a compound page in new_order.
> +	 */
>  	smp_wmb();
>  
>  	/*
> @@ -2339,10 +2345,15 @@ static void __split_huge_page_tail(struct page *head, int tail,
>  	 * which needs correct compound_head().
>  	 */
>  	clear_compound_head(page_tail);
> +	if (new_order) {
> +		prep_compound_page(page_tail, new_order);
> +		prep_transhuge_page(page_tail);
> +	}
>  
>  	/* Finally unfreeze refcount. Additional reference from page cache. */
> -	page_ref_unfreeze(page_tail, 1 + (!PageAnon(head) ||
> -					  PageSwapCache(head)));
> +	page_ref_unfreeze(page_tail, 1 + ((!PageAnon(head) ||
> +					   PageSwapCache(head)) ?
> +						thp_nr_pages(page_tail) : 0));
>  
>  	if (page_is_young(head))
>  		set_page_young(page_tail);
> @@ -2360,7 +2371,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>  }
>  
>  static void __split_huge_page(struct page *page, struct list_head *list,
> -		pgoff_t end)
> +		pgoff_t end, unsigned int new_order)
>  {
>  	struct folio *folio = page_folio(page);
>  	struct page *head = &folio->page;
> @@ -2369,10 +2380,11 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>  	unsigned long offset = 0;
>  	unsigned int order = thp_order(head);
>  	unsigned int nr = thp_nr_pages(head);
> +	unsigned int new_nr = 1 << new_order;
>  	int i;
>  
>  	/* complete memcg works before add pages to LRU */
> -	split_page_memcg(head, nr, 0);
> +	split_page_memcg(head, nr, new_order);
>  
>  	if (PageAnon(head) && PageSwapCache(head)) {
>  		swp_entry_t entry = { .val = page_private(head) };
> @@ -2387,42 +2399,50 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>  
>  	ClearPageHasHWPoisoned(head);
>  
> -	for (i = nr - 1; i >= 1; i--) {
> -		__split_huge_page_tail(head, i, lruvec, list);
> +	for (i = nr - new_nr; i >= new_nr; i -= new_nr) {
> +		__split_huge_page_tail(head, i, lruvec, list, new_order);
>  		/* Some pages can be beyond EOF: drop them from page cache */
>  		if (head[i].index >= end) {
>  			ClearPageDirty(head + i);
>  			__delete_from_page_cache(head + i, NULL);
>  			if (shmem_mapping(head->mapping))
> -				shmem_uncharge(head->mapping->host, 1);
> +				shmem_uncharge(head->mapping->host, new_nr);
>  			put_page(head + i);
>  		} else if (!PageAnon(page)) {
>  			__xa_store(&head->mapping->i_pages, head[i].index,
>  					head + i, 0);
>  		} else if (swap_cache) {
> +			/*
> +			 * split anonymous THPs (including swapped out ones) to
> +			 * non-zero order not supported
> +			 */
> +			VM_BUG_ON(new_order);
>  			__xa_store(&swap_cache->i_pages, offset + i,
>  					head + i, 0);
>  		}
>  	}
>  
> -	ClearPageCompound(head);
> +	if (!new_order)
> +		ClearPageCompound(head);
> +	else
> +		set_compound_order(head, new_order);
>  	unlock_page_lruvec(lruvec);
>  	/* Caller disabled irqs, so they are still disabled here */
>  
> -	split_page_owner(head, order, 0);
> +	split_page_owner(head, order, new_order);
>  
>  	/* See comment in __split_huge_page_tail() */
>  	if (PageAnon(head)) {
>  		/* Additional pin to swap cache */
>  		if (PageSwapCache(head)) {
> -			page_ref_add(head, 2);
> +			page_ref_add(head, 1 + new_nr);
>  			xa_unlock(&swap_cache->i_pages);
>  		} else {
>  			page_ref_inc(head);
>  		}
>  	} else {
>  		/* Additional pin to page cache */
> -		page_ref_add(head, 2);
> +		page_ref_add(head, 1 + new_nr);
>  		xa_unlock(&head->mapping->i_pages);
>  	}
>  	local_irq_enable();
> @@ -2435,7 +2455,14 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>  		split_swap_cluster(entry);
>  	}
>  
> -	for (i = 0; i < nr; i++) {
> +	/*
> +	 * set page to its compound_head when split to THPs, so that GUP pin and
> +	 * PG_locked are transferred to the right after-split page
> +	 */
> +	if (new_order)
> +		page = compound_head(page);
> +
> +	for (i = 0; i < nr; i += new_nr) {
>  		struct page *subpage = head + i;
>  		if (subpage == page)
>  			continue;
> @@ -2472,36 +2499,60 @@ bool can_split_folio(struct folio *folio, int *pextra_pins)
>   * This function splits huge page into normal pages. @page can point to any
>   * subpage of huge page to split. Split doesn't change the position of @page.
>   *
> + * See split_huge_page_to_list_to_order() for more details.
> + *
> + * Returns 0 if the hugepage is split successfully.
> + * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
> + * us.
> + */
> +int split_huge_page_to_list(struct page *page, struct list_head *list)
> +{
> +	return split_huge_page_to_list_to_order(page, list, 0);
> +}
> +
> +/*
> + * This function splits huge page into pages in @new_order. @page can point to
> + * any subpage of huge page to split. Split doesn't change the position of
> + * @page.
> + *
>   * Only caller must hold pin on the @page, otherwise split fails with -EBUSY.
>   * The huge page must be locked.
>   *
>   * If @list is null, tail pages will be added to LRU list, otherwise, to @list.
>   *
> - * Both head page and tail pages will inherit mapping, flags, and so on from
> - * the hugepage.
> + * Pages in new_order will inherit mapping, flags, and so on from the hugepage.
>   *
> - * GUP pin and PG_locked transferred to @page. Rest subpages can be freed if
> - * they are not mapped.
> + * GUP pin and PG_locked transferred to @page or the compound page @page belongs
> + * to. Rest subpages can be freed if they are not mapped.
>   *
>   * Returns 0 if the hugepage is split successfully.
>   * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
>   * us.
>   */
> -int split_huge_page_to_list(struct page *page, struct list_head *list)
> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
> +				     unsigned int new_order)
>  {
>  	struct folio *folio = page_folio(page);
>  	struct page *head = &folio->page;
>  	struct deferred_split *ds_queue = get_deferred_split_queue(head);
> -	XA_STATE(xas, &head->mapping->i_pages, head->index);
> +	/* reset xarray order to new order after split */
> +	XA_STATE_ORDER(xas, &head->mapping->i_pages, head->index, new_order);
>  	struct anon_vma *anon_vma = NULL;
>  	struct address_space *mapping = NULL;
>  	int extra_pins, ret;
>  	pgoff_t end;
>  
> +	VM_BUG_ON(thp_order(head) <= new_order);
>  	VM_BUG_ON_PAGE(is_huge_zero_page(head), head);
>  	VM_BUG_ON_PAGE(!PageLocked(head), head);
>  	VM_BUG_ON_PAGE(!PageCompound(head), head);
>  
> +	/* Cannot split THP to order-1 (no order-1 THPs) */
> +	VM_BUG_ON(new_order == 1);
> +
> +	/* Split anonymous THP to non-zero order not support */
> +	VM_BUG_ON(PageAnon(head) && new_order);
> +
>  	if (PageWriteback(head))
>  		return -EBUSY;
>  
> @@ -2582,7 +2633,7 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
>  	if (page_ref_freeze(head, 1 + extra_pins)) {
>  		if (!list_empty(page_deferred_list(head))) {
>  			ds_queue->split_queue_len--;
> -			list_del(page_deferred_list(head));
> +			list_del_init(page_deferred_list(head));

Can you, please, add the comment from the changelog here as well?

Thanks!

Re: [RFC PATCH 3/5] mm: thp: split huge page to any lower order pages.

[Zi Yan]

[-- Attachment #1: Type: text/plain, Size: 12468 bytes --]

On 21 Mar 2022, at 18:18, Roman Gushchin wrote:

> On Mon, Mar 21, 2022 at 10:21:26AM -0400, Zi Yan wrote:
>> From: Zi Yan <ziy@nvidia.com>
>>
>> To split a THP to any lower order pages, we need to reform THPs on
>> subpages at given order and add page refcount based on the new page
>> order. Also we need to reinitialize page_deferred_list after removing
>> the page from the split_queue, otherwise a subsequent split will see
>> list corruption when checking the page_deferred_list again.
>>
>> It has many uses, like minimizing the number of pages after
>> truncating a pagecache THP. For anonymous THPs, we can only split them
>> to order-0 like before until we add support for any size anonymous THPs.
>>
>> Signed-off-by: Zi Yan <ziy@nvidia.com>
>
> Overall the patch looks good to me, please, feel free to add
> Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
> to the next version.
>
> Couple of small nits below:
>
>> ---
>>  include/linux/huge_mm.h |   8 +++
>>  mm/huge_memory.c        | 111 ++++++++++++++++++++++++++++++----------
>>  2 files changed, 91 insertions(+), 28 deletions(-)
>>
>> diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
>> index 2999190adc22..c7153cd7e9e4 100644
>> --- a/include/linux/huge_mm.h
>> +++ b/include/linux/huge_mm.h
>> @@ -186,6 +186,8 @@ void free_transhuge_page(struct page *page);
>>
>>  bool can_split_folio(struct folio *folio, int *pextra_pins);
>>  int split_huge_page_to_list(struct page *page, struct list_head *list);
>> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>> +		unsigned int new_order);
>
> Do we really need both? Maybe add the new_order argument to the existing function?
> It seems like there are not so many call sites.

Sure. I can do that.

>
>>  static inline int split_huge_page(struct page *page)
>>  {
>>  	return split_huge_page_to_list(page, NULL);
>> @@ -355,6 +357,12 @@ split_huge_page_to_list(struct page *page, struct list_head *list)
>>  {
>>  	return 0;
>>  }
>> +static inline int
>> +split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>> +		unsigned int new_order)
>> +{
>> +	return 0;
>> +}
>>  static inline int split_huge_page(struct page *page)
>>  {
>>  	return 0;
>> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
>> index fcfa46af6c4c..3617aa3ad0b1 100644
>> --- a/mm/huge_memory.c
>> +++ b/mm/huge_memory.c
>> @@ -2236,11 +2236,13 @@ void vma_adjust_trans_huge(struct vm_area_struct *vma,
>>  static void unmap_page(struct page *page)
>>  {
>>  	struct folio *folio = page_folio(page);
>> -	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SPLIT_HUGE_PMD |
>> -		TTU_SYNC;
>> +	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SYNC;
>>
>>  	VM_BUG_ON_PAGE(!PageHead(page), page);
>>
>> +	if (folio_order(folio) >= HPAGE_PMD_ORDER)
>> +		ttu_flags |= TTU_SPLIT_HUGE_PMD;
>> +
>>  	/*
>>  	 * Anon pages need migration entries to preserve them, but file
>>  	 * pages can simply be left unmapped, then faulted back on demand.
>> @@ -2254,9 +2256,9 @@ static void unmap_page(struct page *page)
>>  	VM_WARN_ON_ONCE_PAGE(page_mapped(page), page);
>>  }
>>
>> -static void remap_page(struct folio *folio, unsigned long nr)
>> +static void remap_page(struct folio *folio, unsigned short nr)
>>  {
>> -	int i = 0;
>> +	unsigned int i;
>>
>>  	/* If unmap_page() uses try_to_migrate() on file, remove this check */
>>  	if (!folio_test_anon(folio))
>> @@ -2274,7 +2276,6 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>>  		struct lruvec *lruvec, struct list_head *list)
>>  {
>>  	VM_BUG_ON_PAGE(!PageHead(head), head);
>> -	VM_BUG_ON_PAGE(PageCompound(tail), head);
>>  	VM_BUG_ON_PAGE(PageLRU(tail), head);
>>  	lockdep_assert_held(&lruvec->lru_lock);
>>
>> @@ -2295,9 +2296,10 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>>  }
>>
>>  static void __split_huge_page_tail(struct page *head, int tail,
>> -		struct lruvec *lruvec, struct list_head *list)
>> +		struct lruvec *lruvec, struct list_head *list, unsigned int new_order)
>>  {
>>  	struct page *page_tail = head + tail;
>> +	unsigned long compound_head_flag = new_order ? (1L << PG_head) : 0;
>>
>>  	VM_BUG_ON_PAGE(atomic_read(&page_tail->_mapcount) != -1, page_tail);
>>
>> @@ -2321,6 +2323,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>  #ifdef CONFIG_64BIT
>>  			 (1L << PG_arch_2) |
>>  #endif
>> +			 compound_head_flag |
>>  			 (1L << PG_dirty)));
>>
>>  	/* ->mapping in first tail page is compound_mapcount */
>> @@ -2329,7 +2332,10 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>  	page_tail->mapping = head->mapping;
>>  	page_tail->index = head->index + tail;
>>
>> -	/* Page flags must be visible before we make the page non-compound. */
>> +	/*
>> +	 * Page flags must be visible before we make the page non-compound or
>> +	 * a compound page in new_order.
>> +	 */
>>  	smp_wmb();
>>
>>  	/*
>> @@ -2339,10 +2345,15 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>  	 * which needs correct compound_head().
>>  	 */
>>  	clear_compound_head(page_tail);
>> +	if (new_order) {
>> +		prep_compound_page(page_tail, new_order);
>> +		prep_transhuge_page(page_tail);
>> +	}
>>
>>  	/* Finally unfreeze refcount. Additional reference from page cache. */
>> -	page_ref_unfreeze(page_tail, 1 + (!PageAnon(head) ||
>> -					  PageSwapCache(head)));
>> +	page_ref_unfreeze(page_tail, 1 + ((!PageAnon(head) ||
>> +					   PageSwapCache(head)) ?
>> +						thp_nr_pages(page_tail) : 0));
>>
>>  	if (page_is_young(head))
>>  		set_page_young(page_tail);
>> @@ -2360,7 +2371,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>  }
>>
>>  static void __split_huge_page(struct page *page, struct list_head *list,
>> -		pgoff_t end)
>> +		pgoff_t end, unsigned int new_order)
>>  {
>>  	struct folio *folio = page_folio(page);
>>  	struct page *head = &folio->page;
>> @@ -2369,10 +2380,11 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>>  	unsigned long offset = 0;
>>  	unsigned int order = thp_order(head);
>>  	unsigned int nr = thp_nr_pages(head);
>> +	unsigned int new_nr = 1 << new_order;
>>  	int i;
>>
>>  	/* complete memcg works before add pages to LRU */
>> -	split_page_memcg(head, nr, 0);
>> +	split_page_memcg(head, nr, new_order);
>>
>>  	if (PageAnon(head) && PageSwapCache(head)) {
>>  		swp_entry_t entry = { .val = page_private(head) };
>> @@ -2387,42 +2399,50 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>>
>>  	ClearPageHasHWPoisoned(head);
>>
>> -	for (i = nr - 1; i >= 1; i--) {
>> -		__split_huge_page_tail(head, i, lruvec, list);
>> +	for (i = nr - new_nr; i >= new_nr; i -= new_nr) {
>> +		__split_huge_page_tail(head, i, lruvec, list, new_order);
>>  		/* Some pages can be beyond EOF: drop them from page cache */
>>  		if (head[i].index >= end) {
>>  			ClearPageDirty(head + i);
>>  			__delete_from_page_cache(head + i, NULL);
>>  			if (shmem_mapping(head->mapping))
>> -				shmem_uncharge(head->mapping->host, 1);
>> +				shmem_uncharge(head->mapping->host, new_nr);
>>  			put_page(head + i);
>>  		} else if (!PageAnon(page)) {
>>  			__xa_store(&head->mapping->i_pages, head[i].index,
>>  					head + i, 0);
>>  		} else if (swap_cache) {
>> +			/*
>> +			 * split anonymous THPs (including swapped out ones) to
>> +			 * non-zero order not supported
>> +			 */
>> +			VM_BUG_ON(new_order);
>>  			__xa_store(&swap_cache->i_pages, offset + i,
>>  					head + i, 0);
>>  		}
>>  	}
>>
>> -	ClearPageCompound(head);
>> +	if (!new_order)
>> +		ClearPageCompound(head);
>> +	else
>> +		set_compound_order(head, new_order);
>>  	unlock_page_lruvec(lruvec);
>>  	/* Caller disabled irqs, so they are still disabled here */
>>
>> -	split_page_owner(head, order, 0);
>> +	split_page_owner(head, order, new_order);
>>
>>  	/* See comment in __split_huge_page_tail() */
>>  	if (PageAnon(head)) {
>>  		/* Additional pin to swap cache */
>>  		if (PageSwapCache(head)) {
>> -			page_ref_add(head, 2);
>> +			page_ref_add(head, 1 + new_nr);
>>  			xa_unlock(&swap_cache->i_pages);
>>  		} else {
>>  			page_ref_inc(head);
>>  		}
>>  	} else {
>>  		/* Additional pin to page cache */
>> -		page_ref_add(head, 2);
>> +		page_ref_add(head, 1 + new_nr);
>>  		xa_unlock(&head->mapping->i_pages);
>>  	}
>>  	local_irq_enable();
>> @@ -2435,7 +2455,14 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>>  		split_swap_cluster(entry);
>>  	}
>>
>> -	for (i = 0; i < nr; i++) {
>> +	/*
>> +	 * set page to its compound_head when split to THPs, so that GUP pin and
>> +	 * PG_locked are transferred to the right after-split page
>> +	 */
>> +	if (new_order)
>> +		page = compound_head(page);
>> +
>> +	for (i = 0; i < nr; i += new_nr) {
>>  		struct page *subpage = head + i;
>>  		if (subpage == page)
>>  			continue;
>> @@ -2472,36 +2499,60 @@ bool can_split_folio(struct folio *folio, int *pextra_pins)
>>   * This function splits huge page into normal pages. @page can point to any
>>   * subpage of huge page to split. Split doesn't change the position of @page.
>>   *
>> + * See split_huge_page_to_list_to_order() for more details.
>> + *
>> + * Returns 0 if the hugepage is split successfully.
>> + * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
>> + * us.
>> + */
>> +int split_huge_page_to_list(struct page *page, struct list_head *list)
>> +{
>> +	return split_huge_page_to_list_to_order(page, list, 0);
>> +}
>> +
>> +/*
>> + * This function splits huge page into pages in @new_order. @page can point to
>> + * any subpage of huge page to split. Split doesn't change the position of
>> + * @page.
>> + *
>>   * Only caller must hold pin on the @page, otherwise split fails with -EBUSY.
>>   * The huge page must be locked.
>>   *
>>   * If @list is null, tail pages will be added to LRU list, otherwise, to @list.
>>   *
>> - * Both head page and tail pages will inherit mapping, flags, and so on from
>> - * the hugepage.
>> + * Pages in new_order will inherit mapping, flags, and so on from the hugepage.
>>   *
>> - * GUP pin and PG_locked transferred to @page. Rest subpages can be freed if
>> - * they are not mapped.
>> + * GUP pin and PG_locked transferred to @page or the compound page @page belongs
>> + * to. Rest subpages can be freed if they are not mapped.
>>   *
>>   * Returns 0 if the hugepage is split successfully.
>>   * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
>>   * us.
>>   */
>> -int split_huge_page_to_list(struct page *page, struct list_head *list)
>> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>> +				     unsigned int new_order)
>>  {
>>  	struct folio *folio = page_folio(page);
>>  	struct page *head = &folio->page;
>>  	struct deferred_split *ds_queue = get_deferred_split_queue(head);
>> -	XA_STATE(xas, &head->mapping->i_pages, head->index);
>> +	/* reset xarray order to new order after split */
>> +	XA_STATE_ORDER(xas, &head->mapping->i_pages, head->index, new_order);
>>  	struct anon_vma *anon_vma = NULL;
>>  	struct address_space *mapping = NULL;
>>  	int extra_pins, ret;
>>  	pgoff_t end;
>>
>> +	VM_BUG_ON(thp_order(head) <= new_order);
>>  	VM_BUG_ON_PAGE(is_huge_zero_page(head), head);
>>  	VM_BUG_ON_PAGE(!PageLocked(head), head);
>>  	VM_BUG_ON_PAGE(!PageCompound(head), head);
>>
>> +	/* Cannot split THP to order-1 (no order-1 THPs) */
>> +	VM_BUG_ON(new_order == 1);
>> +
>> +	/* Split anonymous THP to non-zero order not support */
>> +	VM_BUG_ON(PageAnon(head) && new_order);
>> +
>>  	if (PageWriteback(head))
>>  		return -EBUSY;
>>
>> @@ -2582,7 +2633,7 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
>>  	if (page_ref_freeze(head, 1 + extra_pins)) {
>>  		if (!list_empty(page_deferred_list(head))) {
>>  			ds_queue->split_queue_len--;
>> -			list_del(page_deferred_list(head));
>> +			list_del_init(page_deferred_list(head));
>
> Can you, please, add the comment from the changelog here as well?

Make sense. Will do.

Thanks.

--
Best Regards,
Yan, Zi

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 854 bytes --]

Re: [RFC PATCH 3/5] mm: thp: split huge page to any lower order pages.

[Zi Yan]

[-- Attachment #1: Type: text/plain, Size: 12524 bytes --]

On 21 Mar 2022, at 18:18, Roman Gushchin wrote:

> On Mon, Mar 21, 2022 at 10:21:26AM -0400, Zi Yan wrote:
>> From: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>>
>> To split a THP to any lower order pages, we need to reform THPs on
>> subpages at given order and add page refcount based on the new page
>> order. Also we need to reinitialize page_deferred_list after removing
>> the page from the split_queue, otherwise a subsequent split will see
>> list corruption when checking the page_deferred_list again.
>>
>> It has many uses, like minimizing the number of pages after
>> truncating a pagecache THP. For anonymous THPs, we can only split them
>> to order-0 like before until we add support for any size anonymous THPs.
>>
>> Signed-off-by: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>
> Overall the patch looks good to me, please, feel free to add
> Reviewed-by: Roman Gushchin <roman.gushchin-fxUVXftIFDnyG1zEObXtfA@public.gmane.org>
> to the next version.
>
> Couple of small nits below:
>
>> ---
>>  include/linux/huge_mm.h |   8 +++
>>  mm/huge_memory.c        | 111 ++++++++++++++++++++++++++++++----------
>>  2 files changed, 91 insertions(+), 28 deletions(-)
>>
>> diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
>> index 2999190adc22..c7153cd7e9e4 100644
>> --- a/include/linux/huge_mm.h
>> +++ b/include/linux/huge_mm.h
>> @@ -186,6 +186,8 @@ void free_transhuge_page(struct page *page);
>>
>>  bool can_split_folio(struct folio *folio, int *pextra_pins);
>>  int split_huge_page_to_list(struct page *page, struct list_head *list);
>> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>> +		unsigned int new_order);
>
> Do we really need both? Maybe add the new_order argument to the existing function?
> It seems like there are not so many call sites.

Sure. I can do that.

>
>>  static inline int split_huge_page(struct page *page)
>>  {
>>  	return split_huge_page_to_list(page, NULL);
>> @@ -355,6 +357,12 @@ split_huge_page_to_list(struct page *page, struct list_head *list)
>>  {
>>  	return 0;
>>  }
>> +static inline int
>> +split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>> +		unsigned int new_order)
>> +{
>> +	return 0;
>> +}
>>  static inline int split_huge_page(struct page *page)
>>  {
>>  	return 0;
>> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
>> index fcfa46af6c4c..3617aa3ad0b1 100644
>> --- a/mm/huge_memory.c
>> +++ b/mm/huge_memory.c
>> @@ -2236,11 +2236,13 @@ void vma_adjust_trans_huge(struct vm_area_struct *vma,
>>  static void unmap_page(struct page *page)
>>  {
>>  	struct folio *folio = page_folio(page);
>> -	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SPLIT_HUGE_PMD |
>> -		TTU_SYNC;
>> +	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SYNC;
>>
>>  	VM_BUG_ON_PAGE(!PageHead(page), page);
>>
>> +	if (folio_order(folio) >= HPAGE_PMD_ORDER)
>> +		ttu_flags |= TTU_SPLIT_HUGE_PMD;
>> +
>>  	/*
>>  	 * Anon pages need migration entries to preserve them, but file
>>  	 * pages can simply be left unmapped, then faulted back on demand.
>> @@ -2254,9 +2256,9 @@ static void unmap_page(struct page *page)
>>  	VM_WARN_ON_ONCE_PAGE(page_mapped(page), page);
>>  }
>>
>> -static void remap_page(struct folio *folio, unsigned long nr)
>> +static void remap_page(struct folio *folio, unsigned short nr)
>>  {
>> -	int i = 0;
>> +	unsigned int i;
>>
>>  	/* If unmap_page() uses try_to_migrate() on file, remove this check */
>>  	if (!folio_test_anon(folio))
>> @@ -2274,7 +2276,6 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>>  		struct lruvec *lruvec, struct list_head *list)
>>  {
>>  	VM_BUG_ON_PAGE(!PageHead(head), head);
>> -	VM_BUG_ON_PAGE(PageCompound(tail), head);
>>  	VM_BUG_ON_PAGE(PageLRU(tail), head);
>>  	lockdep_assert_held(&lruvec->lru_lock);
>>
>> @@ -2295,9 +2296,10 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>>  }
>>
>>  static void __split_huge_page_tail(struct page *head, int tail,
>> -		struct lruvec *lruvec, struct list_head *list)
>> +		struct lruvec *lruvec, struct list_head *list, unsigned int new_order)
>>  {
>>  	struct page *page_tail = head + tail;
>> +	unsigned long compound_head_flag = new_order ? (1L << PG_head) : 0;
>>
>>  	VM_BUG_ON_PAGE(atomic_read(&page_tail->_mapcount) != -1, page_tail);
>>
>> @@ -2321,6 +2323,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>  #ifdef CONFIG_64BIT
>>  			 (1L << PG_arch_2) |
>>  #endif
>> +			 compound_head_flag |
>>  			 (1L << PG_dirty)));
>>
>>  	/* ->mapping in first tail page is compound_mapcount */
>> @@ -2329,7 +2332,10 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>  	page_tail->mapping = head->mapping;
>>  	page_tail->index = head->index + tail;
>>
>> -	/* Page flags must be visible before we make the page non-compound. */
>> +	/*
>> +	 * Page flags must be visible before we make the page non-compound or
>> +	 * a compound page in new_order.
>> +	 */
>>  	smp_wmb();
>>
>>  	/*
>> @@ -2339,10 +2345,15 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>  	 * which needs correct compound_head().
>>  	 */
>>  	clear_compound_head(page_tail);
>> +	if (new_order) {
>> +		prep_compound_page(page_tail, new_order);
>> +		prep_transhuge_page(page_tail);
>> +	}
>>
>>  	/* Finally unfreeze refcount. Additional reference from page cache. */
>> -	page_ref_unfreeze(page_tail, 1 + (!PageAnon(head) ||
>> -					  PageSwapCache(head)));
>> +	page_ref_unfreeze(page_tail, 1 + ((!PageAnon(head) ||
>> +					   PageSwapCache(head)) ?
>> +						thp_nr_pages(page_tail) : 0));
>>
>>  	if (page_is_young(head))
>>  		set_page_young(page_tail);
>> @@ -2360,7 +2371,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>  }
>>
>>  static void __split_huge_page(struct page *page, struct list_head *list,
>> -		pgoff_t end)
>> +		pgoff_t end, unsigned int new_order)
>>  {
>>  	struct folio *folio = page_folio(page);
>>  	struct page *head = &folio->page;
>> @@ -2369,10 +2380,11 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>>  	unsigned long offset = 0;
>>  	unsigned int order = thp_order(head);
>>  	unsigned int nr = thp_nr_pages(head);
>> +	unsigned int new_nr = 1 << new_order;
>>  	int i;
>>
>>  	/* complete memcg works before add pages to LRU */
>> -	split_page_memcg(head, nr, 0);
>> +	split_page_memcg(head, nr, new_order);
>>
>>  	if (PageAnon(head) && PageSwapCache(head)) {
>>  		swp_entry_t entry = { .val = page_private(head) };
>> @@ -2387,42 +2399,50 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>>
>>  	ClearPageHasHWPoisoned(head);
>>
>> -	for (i = nr - 1; i >= 1; i--) {
>> -		__split_huge_page_tail(head, i, lruvec, list);
>> +	for (i = nr - new_nr; i >= new_nr; i -= new_nr) {
>> +		__split_huge_page_tail(head, i, lruvec, list, new_order);
>>  		/* Some pages can be beyond EOF: drop them from page cache */
>>  		if (head[i].index >= end) {
>>  			ClearPageDirty(head + i);
>>  			__delete_from_page_cache(head + i, NULL);
>>  			if (shmem_mapping(head->mapping))
>> -				shmem_uncharge(head->mapping->host, 1);
>> +				shmem_uncharge(head->mapping->host, new_nr);
>>  			put_page(head + i);
>>  		} else if (!PageAnon(page)) {
>>  			__xa_store(&head->mapping->i_pages, head[i].index,
>>  					head + i, 0);
>>  		} else if (swap_cache) {
>> +			/*
>> +			 * split anonymous THPs (including swapped out ones) to
>> +			 * non-zero order not supported
>> +			 */
>> +			VM_BUG_ON(new_order);
>>  			__xa_store(&swap_cache->i_pages, offset + i,
>>  					head + i, 0);
>>  		}
>>  	}
>>
>> -	ClearPageCompound(head);
>> +	if (!new_order)
>> +		ClearPageCompound(head);
>> +	else
>> +		set_compound_order(head, new_order);
>>  	unlock_page_lruvec(lruvec);
>>  	/* Caller disabled irqs, so they are still disabled here */
>>
>> -	split_page_owner(head, order, 0);
>> +	split_page_owner(head, order, new_order);
>>
>>  	/* See comment in __split_huge_page_tail() */
>>  	if (PageAnon(head)) {
>>  		/* Additional pin to swap cache */
>>  		if (PageSwapCache(head)) {
>> -			page_ref_add(head, 2);
>> +			page_ref_add(head, 1 + new_nr);
>>  			xa_unlock(&swap_cache->i_pages);
>>  		} else {
>>  			page_ref_inc(head);
>>  		}
>>  	} else {
>>  		/* Additional pin to page cache */
>> -		page_ref_add(head, 2);
>> +		page_ref_add(head, 1 + new_nr);
>>  		xa_unlock(&head->mapping->i_pages);
>>  	}
>>  	local_irq_enable();
>> @@ -2435,7 +2455,14 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>>  		split_swap_cluster(entry);
>>  	}
>>
>> -	for (i = 0; i < nr; i++) {
>> +	/*
>> +	 * set page to its compound_head when split to THPs, so that GUP pin and
>> +	 * PG_locked are transferred to the right after-split page
>> +	 */
>> +	if (new_order)
>> +		page = compound_head(page);
>> +
>> +	for (i = 0; i < nr; i += new_nr) {
>>  		struct page *subpage = head + i;
>>  		if (subpage == page)
>>  			continue;
>> @@ -2472,36 +2499,60 @@ bool can_split_folio(struct folio *folio, int *pextra_pins)
>>   * This function splits huge page into normal pages. @page can point to any
>>   * subpage of huge page to split. Split doesn't change the position of @page.
>>   *
>> + * See split_huge_page_to_list_to_order() for more details.
>> + *
>> + * Returns 0 if the hugepage is split successfully.
>> + * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
>> + * us.
>> + */
>> +int split_huge_page_to_list(struct page *page, struct list_head *list)
>> +{
>> +	return split_huge_page_to_list_to_order(page, list, 0);
>> +}
>> +
>> +/*
>> + * This function splits huge page into pages in @new_order. @page can point to
>> + * any subpage of huge page to split. Split doesn't change the position of
>> + * @page.
>> + *
>>   * Only caller must hold pin on the @page, otherwise split fails with -EBUSY.
>>   * The huge page must be locked.
>>   *
>>   * If @list is null, tail pages will be added to LRU list, otherwise, to @list.
>>   *
>> - * Both head page and tail pages will inherit mapping, flags, and so on from
>> - * the hugepage.
>> + * Pages in new_order will inherit mapping, flags, and so on from the hugepage.
>>   *
>> - * GUP pin and PG_locked transferred to @page. Rest subpages can be freed if
>> - * they are not mapped.
>> + * GUP pin and PG_locked transferred to @page or the compound page @page belongs
>> + * to. Rest subpages can be freed if they are not mapped.
>>   *
>>   * Returns 0 if the hugepage is split successfully.
>>   * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
>>   * us.
>>   */
>> -int split_huge_page_to_list(struct page *page, struct list_head *list)
>> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>> +				     unsigned int new_order)
>>  {
>>  	struct folio *folio = page_folio(page);
>>  	struct page *head = &folio->page;
>>  	struct deferred_split *ds_queue = get_deferred_split_queue(head);
>> -	XA_STATE(xas, &head->mapping->i_pages, head->index);
>> +	/* reset xarray order to new order after split */
>> +	XA_STATE_ORDER(xas, &head->mapping->i_pages, head->index, new_order);
>>  	struct anon_vma *anon_vma = NULL;
>>  	struct address_space *mapping = NULL;
>>  	int extra_pins, ret;
>>  	pgoff_t end;
>>
>> +	VM_BUG_ON(thp_order(head) <= new_order);
>>  	VM_BUG_ON_PAGE(is_huge_zero_page(head), head);
>>  	VM_BUG_ON_PAGE(!PageLocked(head), head);
>>  	VM_BUG_ON_PAGE(!PageCompound(head), head);
>>
>> +	/* Cannot split THP to order-1 (no order-1 THPs) */
>> +	VM_BUG_ON(new_order == 1);
>> +
>> +	/* Split anonymous THP to non-zero order not support */
>> +	VM_BUG_ON(PageAnon(head) && new_order);
>> +
>>  	if (PageWriteback(head))
>>  		return -EBUSY;
>>
>> @@ -2582,7 +2633,7 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
>>  	if (page_ref_freeze(head, 1 + extra_pins)) {
>>  		if (!list_empty(page_deferred_list(head))) {
>>  			ds_queue->split_queue_len--;
>> -			list_del(page_deferred_list(head));
>> +			list_del_init(page_deferred_list(head));
>
> Can you, please, add the comment from the changelog here as well?

Make sense. Will do.

Thanks.

Re: [RFC PATCH 3/5] mm: thp: split huge page to any lower order pages.

[Miaohe Lin]

On 2022/3/21 22:21, Zi Yan wrote:
> From: Zi Yan <ziy@nvidia.com>
> 
> To split a THP to any lower order pages, we need to reform THPs on
> subpages at given order and add page refcount based on the new page
> order. Also we need to reinitialize page_deferred_list after removing
> the page from the split_queue, otherwise a subsequent split will see
> list corruption when checking the page_deferred_list again.
> 
> It has many uses, like minimizing the number of pages after
> truncating a pagecache THP. For anonymous THPs, we can only split them
> to order-0 like before until we add support for any size anonymous THPs.
> 
> Signed-off-by: Zi Yan <ziy@nvidia.com>
> ---
>  include/linux/huge_mm.h |   8 +++
>  mm/huge_memory.c        | 111 ++++++++++++++++++++++++++++++----------
>  2 files changed, 91 insertions(+), 28 deletions(-)
> 
> diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
> index 2999190adc22..c7153cd7e9e4 100644
> --- a/include/linux/huge_mm.h
> +++ b/include/linux/huge_mm.h
> @@ -186,6 +186,8 @@ void free_transhuge_page(struct page *page);
>  
>  bool can_split_folio(struct folio *folio, int *pextra_pins);
>  int split_huge_page_to_list(struct page *page, struct list_head *list);
> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
> +		unsigned int new_order);
>  static inline int split_huge_page(struct page *page)
>  {
>  	return split_huge_page_to_list(page, NULL);
> @@ -355,6 +357,12 @@ split_huge_page_to_list(struct page *page, struct list_head *list)
>  {
>  	return 0;
>  }
> +static inline int
> +split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
> +		unsigned int new_order)
> +{
> +	return 0;
> +}
>  static inline int split_huge_page(struct page *page)
>  {
>  	return 0;
> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> index fcfa46af6c4c..3617aa3ad0b1 100644
> --- a/mm/huge_memory.c
> +++ b/mm/huge_memory.c
> @@ -2236,11 +2236,13 @@ void vma_adjust_trans_huge(struct vm_area_struct *vma,
>  static void unmap_page(struct page *page)
>  {
>  	struct folio *folio = page_folio(page);
> -	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SPLIT_HUGE_PMD |
> -		TTU_SYNC;
> +	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SYNC;
>  
>  	VM_BUG_ON_PAGE(!PageHead(page), page);
>  
> +	if (folio_order(folio) >= HPAGE_PMD_ORDER)
> +		ttu_flags |= TTU_SPLIT_HUGE_PMD;
> +
>  	/*
>  	 * Anon pages need migration entries to preserve them, but file
>  	 * pages can simply be left unmapped, then faulted back on demand.
> @@ -2254,9 +2256,9 @@ static void unmap_page(struct page *page)
>  	VM_WARN_ON_ONCE_PAGE(page_mapped(page), page);
>  }
>  
> -static void remap_page(struct folio *folio, unsigned long nr)
> +static void remap_page(struct folio *folio, unsigned short nr)
>  {
> -	int i = 0;
> +	unsigned int i;
>  
>  	/* If unmap_page() uses try_to_migrate() on file, remove this check */
>  	if (!folio_test_anon(folio))
> @@ -2274,7 +2276,6 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>  		struct lruvec *lruvec, struct list_head *list)
>  {
>  	VM_BUG_ON_PAGE(!PageHead(head), head);
> -	VM_BUG_ON_PAGE(PageCompound(tail), head);
>  	VM_BUG_ON_PAGE(PageLRU(tail), head);
>  	lockdep_assert_held(&lruvec->lru_lock);
>  
> @@ -2295,9 +2296,10 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>  }
>  
>  static void __split_huge_page_tail(struct page *head, int tail,
> -		struct lruvec *lruvec, struct list_head *list)
> +		struct lruvec *lruvec, struct list_head *list, unsigned int new_order)
>  {
>  	struct page *page_tail = head + tail;
> +	unsigned long compound_head_flag = new_order ? (1L << PG_head) : 0;
>  
>  	VM_BUG_ON_PAGE(atomic_read(&page_tail->_mapcount) != -1, page_tail);
>  
> @@ -2321,6 +2323,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>  #ifdef CONFIG_64BIT
>  			 (1L << PG_arch_2) |
>  #endif
> +			 compound_head_flag |
>  			 (1L << PG_dirty)));
>  
>  	/* ->mapping in first tail page is compound_mapcount */
> @@ -2329,7 +2332,10 @@ static void __split_huge_page_tail(struct page *head, int tail,
>  	page_tail->mapping = head->mapping;
>  	page_tail->index = head->index + tail;
>  
> -	/* Page flags must be visible before we make the page non-compound. */
> +	/*
> +	 * Page flags must be visible before we make the page non-compound or
> +	 * a compound page in new_order.
> +	 */
>  	smp_wmb();
>  
>  	/*
> @@ -2339,10 +2345,15 @@ static void __split_huge_page_tail(struct page *head, int tail,
>  	 * which needs correct compound_head().
>  	 */
>  	clear_compound_head(page_tail);
> +	if (new_order) {
> +		prep_compound_page(page_tail, new_order);
> +		prep_transhuge_page(page_tail);
> +	}

Many thanks for your series. It looks really good. One question:
IIUC, It seems there has assumption that LRU compound_pages should
be PageTransHuge. So PageTransHuge just checks PageHead:

static inline int PageTransHuge(struct page *page)
{
	VM_BUG_ON_PAGE(PageTail(page), page);
	return PageHead(page);
}

So LRU pages with any order( > 0) will might be wrongly treated as THP which
has order = HPAGE_PMD_ORDER. We should ensure thp_nr_pages is used instead of
hard coded HPAGE_PMD_ORDER.

Looks at the below code snippet:
mm/mempolicy.c:
static struct page *new_page(struct page *page, unsigned long start)
{
...
	} else if (PageTransHuge(page)) {
		struct page *thp;

		thp = alloc_hugepage_vma(GFP_TRANSHUGE, vma, address,
					 HPAGE_PMD_ORDER);
					 ^^^^^^^^^^^^^^^^
		if (!thp)
			return NULL;
		prep_transhuge_page(thp);
		return thp;
	}
...
}

HPAGE_PMD_ORDER is used instead of thp_nr_pages. So the lower order pages might be
used as if its order is HPAGE_PMD_ORDER. All of such usage might need to be fixed.
Or am I miss something ?

Thanks again for your work. :)

>  
>  	/* Finally unfreeze refcount. Additional reference from page cache. */
> -	page_ref_unfreeze(page_tail, 1 + (!PageAnon(head) ||
> -					  PageSwapCache(head)));
> +	page_ref_unfreeze(page_tail, 1 + ((!PageAnon(head) ||
> +					   PageSwapCache(head)) ?
> +						thp_nr_pages(page_tail) : 0));
>  
>  	if (page_is_young(head))
>  		set_page_young(page_tail);
> @@ -2360,7 +2371,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>  }
>  
>  static void __split_huge_page(struct page *page, struct list_head *list,
> -		pgoff_t end)
> +		pgoff_t end, unsigned int new_order)
>  {
>  	struct folio *folio = page_folio(page);
>  	struct page *head = &folio->page;
> @@ -2369,10 +2380,11 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>  	unsigned long offset = 0;
>  	unsigned int order = thp_order(head);
>  	unsigned int nr = thp_nr_pages(head);
> +	unsigned int new_nr = 1 << new_order;
>  	int i;
>  
>  	/* complete memcg works before add pages to LRU */
> -	split_page_memcg(head, nr, 0);
> +	split_page_memcg(head, nr, new_order);
>  
>  	if (PageAnon(head) && PageSwapCache(head)) {
>  		swp_entry_t entry = { .val = page_private(head) };
> @@ -2387,42 +2399,50 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>  
>  	ClearPageHasHWPoisoned(head);
>  
> -	for (i = nr - 1; i >= 1; i--) {
> -		__split_huge_page_tail(head, i, lruvec, list);
> +	for (i = nr - new_nr; i >= new_nr; i -= new_nr) {
> +		__split_huge_page_tail(head, i, lruvec, list, new_order);
>  		/* Some pages can be beyond EOF: drop them from page cache */
>  		if (head[i].index >= end) {
>  			ClearPageDirty(head + i);
>  			__delete_from_page_cache(head + i, NULL);
>  			if (shmem_mapping(head->mapping))
> -				shmem_uncharge(head->mapping->host, 1);
> +				shmem_uncharge(head->mapping->host, new_nr);
>  			put_page(head + i);
>  		} else if (!PageAnon(page)) {
>  			__xa_store(&head->mapping->i_pages, head[i].index,
>  					head + i, 0);
>  		} else if (swap_cache) {
> +			/*
> +			 * split anonymous THPs (including swapped out ones) to
> +			 * non-zero order not supported
> +			 */
> +			VM_BUG_ON(new_order);
>  			__xa_store(&swap_cache->i_pages, offset + i,
>  					head + i, 0);
>  		}
>  	}
>  
> -	ClearPageCompound(head);
> +	if (!new_order)
> +		ClearPageCompound(head);
> +	else
> +		set_compound_order(head, new_order);
>  	unlock_page_lruvec(lruvec);
>  	/* Caller disabled irqs, so they are still disabled here */
>  
> -	split_page_owner(head, order, 0);
> +	split_page_owner(head, order, new_order);
>  
>  	/* See comment in __split_huge_page_tail() */
>  	if (PageAnon(head)) {
>  		/* Additional pin to swap cache */
>  		if (PageSwapCache(head)) {
> -			page_ref_add(head, 2);
> +			page_ref_add(head, 1 + new_nr);
>  			xa_unlock(&swap_cache->i_pages);
>  		} else {
>  			page_ref_inc(head);
>  		}
>  	} else {
>  		/* Additional pin to page cache */
> -		page_ref_add(head, 2);
> +		page_ref_add(head, 1 + new_nr);
>  		xa_unlock(&head->mapping->i_pages);
>  	}
>  	local_irq_enable();
> @@ -2435,7 +2455,14 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>  		split_swap_cluster(entry);
>  	}
>  
> -	for (i = 0; i < nr; i++) {
> +	/*
> +	 * set page to its compound_head when split to THPs, so that GUP pin and
> +	 * PG_locked are transferred to the right after-split page
> +	 */
> +	if (new_order)
> +		page = compound_head(page);
> +
> +	for (i = 0; i < nr; i += new_nr) {
>  		struct page *subpage = head + i;
>  		if (subpage == page)
>  			continue;
> @@ -2472,36 +2499,60 @@ bool can_split_folio(struct folio *folio, int *pextra_pins)
>   * This function splits huge page into normal pages. @page can point to any
>   * subpage of huge page to split. Split doesn't change the position of @page.
>   *
> + * See split_huge_page_to_list_to_order() for more details.
> + *
> + * Returns 0 if the hugepage is split successfully.
> + * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
> + * us.
> + */
> +int split_huge_page_to_list(struct page *page, struct list_head *list)
> +{
> +	return split_huge_page_to_list_to_order(page, list, 0);
> +}
> +
> +/*
> + * This function splits huge page into pages in @new_order. @page can point to
> + * any subpage of huge page to split. Split doesn't change the position of
> + * @page.
> + *
>   * Only caller must hold pin on the @page, otherwise split fails with -EBUSY.
>   * The huge page must be locked.
>   *
>   * If @list is null, tail pages will be added to LRU list, otherwise, to @list.
>   *
> - * Both head page and tail pages will inherit mapping, flags, and so on from
> - * the hugepage.
> + * Pages in new_order will inherit mapping, flags, and so on from the hugepage.
>   *
> - * GUP pin and PG_locked transferred to @page. Rest subpages can be freed if
> - * they are not mapped.
> + * GUP pin and PG_locked transferred to @page or the compound page @page belongs
> + * to. Rest subpages can be freed if they are not mapped.
>   *
>   * Returns 0 if the hugepage is split successfully.
>   * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
>   * us.
>   */
> -int split_huge_page_to_list(struct page *page, struct list_head *list)
> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
> +				     unsigned int new_order)
>  {
>  	struct folio *folio = page_folio(page);
>  	struct page *head = &folio->page;
>  	struct deferred_split *ds_queue = get_deferred_split_queue(head);
> -	XA_STATE(xas, &head->mapping->i_pages, head->index);
> +	/* reset xarray order to new order after split */
> +	XA_STATE_ORDER(xas, &head->mapping->i_pages, head->index, new_order);
>  	struct anon_vma *anon_vma = NULL;
>  	struct address_space *mapping = NULL;
>  	int extra_pins, ret;
>  	pgoff_t end;
>  
> +	VM_BUG_ON(thp_order(head) <= new_order);
>  	VM_BUG_ON_PAGE(is_huge_zero_page(head), head);
>  	VM_BUG_ON_PAGE(!PageLocked(head), head);
>  	VM_BUG_ON_PAGE(!PageCompound(head), head);
>  
> +	/* Cannot split THP to order-1 (no order-1 THPs) */
> +	VM_BUG_ON(new_order == 1);
> +
> +	/* Split anonymous THP to non-zero order not support */
> +	VM_BUG_ON(PageAnon(head) && new_order);
> +
>  	if (PageWriteback(head))
>  		return -EBUSY;
>  
> @@ -2582,7 +2633,7 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
>  	if (page_ref_freeze(head, 1 + extra_pins)) {
>  		if (!list_empty(page_deferred_list(head))) {
>  			ds_queue->split_queue_len--;
> -			list_del(page_deferred_list(head));
> +			list_del_init(page_deferred_list(head));
>  		}
>  		spin_unlock(&ds_queue->split_queue_lock);
>  		if (mapping) {
> @@ -2592,14 +2643,18 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
>  			if (PageSwapBacked(head)) {
>  				__mod_lruvec_page_state(head, NR_SHMEM_THPS,
>  							-nr);
> -			} else {
> +			} else if (!new_order) {
> +				/*
> +				 * Decrease THP stats only if split to normal
> +				 * pages
> +				 */
>  				__mod_lruvec_page_state(head, NR_FILE_THPS,
>  							-nr);
>  				filemap_nr_thps_dec(mapping);
>  			}
>  		}
>  
> -		__split_huge_page(page, list, end);
> +		__split_huge_page(page, list, end, new_order);
>  		ret = 0;
>  	} else {
>  		spin_unlock(&ds_queue->split_queue_lock);
> 

Re: [RFC PATCH 3/5] mm: thp: split huge page to any lower order pages.

[Miaohe Lin]

On 2022/3/21 22:21, Zi Yan wrote:
> From: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> 
> To split a THP to any lower order pages, we need to reform THPs on
> subpages at given order and add page refcount based on the new page
> order. Also we need to reinitialize page_deferred_list after removing
> the page from the split_queue, otherwise a subsequent split will see
> list corruption when checking the page_deferred_list again.
> 
> It has many uses, like minimizing the number of pages after
> truncating a pagecache THP. For anonymous THPs, we can only split them
> to order-0 like before until we add support for any size anonymous THPs.
> 
> Signed-off-by: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---
>  include/linux/huge_mm.h |   8 +++
>  mm/huge_memory.c        | 111 ++++++++++++++++++++++++++++++----------
>  2 files changed, 91 insertions(+), 28 deletions(-)
> 
> diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
> index 2999190adc22..c7153cd7e9e4 100644
> --- a/include/linux/huge_mm.h
> +++ b/include/linux/huge_mm.h
> @@ -186,6 +186,8 @@ void free_transhuge_page(struct page *page);
>  
>  bool can_split_folio(struct folio *folio, int *pextra_pins);
>  int split_huge_page_to_list(struct page *page, struct list_head *list);
> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
> +		unsigned int new_order);
>  static inline int split_huge_page(struct page *page)
>  {
>  	return split_huge_page_to_list(page, NULL);
> @@ -355,6 +357,12 @@ split_huge_page_to_list(struct page *page, struct list_head *list)
>  {
>  	return 0;
>  }
> +static inline int
> +split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
> +		unsigned int new_order)
> +{
> +	return 0;
> +}
>  static inline int split_huge_page(struct page *page)
>  {
>  	return 0;
> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> index fcfa46af6c4c..3617aa3ad0b1 100644
> --- a/mm/huge_memory.c
> +++ b/mm/huge_memory.c
> @@ -2236,11 +2236,13 @@ void vma_adjust_trans_huge(struct vm_area_struct *vma,
>  static void unmap_page(struct page *page)
>  {
>  	struct folio *folio = page_folio(page);
> -	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SPLIT_HUGE_PMD |
> -		TTU_SYNC;
> +	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SYNC;
>  
>  	VM_BUG_ON_PAGE(!PageHead(page), page);
>  
> +	if (folio_order(folio) >= HPAGE_PMD_ORDER)
> +		ttu_flags |= TTU_SPLIT_HUGE_PMD;
> +
>  	/*
>  	 * Anon pages need migration entries to preserve them, but file
>  	 * pages can simply be left unmapped, then faulted back on demand.
> @@ -2254,9 +2256,9 @@ static void unmap_page(struct page *page)
>  	VM_WARN_ON_ONCE_PAGE(page_mapped(page), page);
>  }
>  
> -static void remap_page(struct folio *folio, unsigned long nr)
> +static void remap_page(struct folio *folio, unsigned short nr)
>  {
> -	int i = 0;
> +	unsigned int i;
>  
>  	/* If unmap_page() uses try_to_migrate() on file, remove this check */
>  	if (!folio_test_anon(folio))
> @@ -2274,7 +2276,6 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>  		struct lruvec *lruvec, struct list_head *list)
>  {
>  	VM_BUG_ON_PAGE(!PageHead(head), head);
> -	VM_BUG_ON_PAGE(PageCompound(tail), head);
>  	VM_BUG_ON_PAGE(PageLRU(tail), head);
>  	lockdep_assert_held(&lruvec->lru_lock);
>  
> @@ -2295,9 +2296,10 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>  }
>  
>  static void __split_huge_page_tail(struct page *head, int tail,
> -		struct lruvec *lruvec, struct list_head *list)
> +		struct lruvec *lruvec, struct list_head *list, unsigned int new_order)
>  {
>  	struct page *page_tail = head + tail;
> +	unsigned long compound_head_flag = new_order ? (1L << PG_head) : 0;
>  
>  	VM_BUG_ON_PAGE(atomic_read(&page_tail->_mapcount) != -1, page_tail);
>  
> @@ -2321,6 +2323,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>  #ifdef CONFIG_64BIT
>  			 (1L << PG_arch_2) |
>  #endif
> +			 compound_head_flag |
>  			 (1L << PG_dirty)));
>  
>  	/* ->mapping in first tail page is compound_mapcount */
> @@ -2329,7 +2332,10 @@ static void __split_huge_page_tail(struct page *head, int tail,
>  	page_tail->mapping = head->mapping;
>  	page_tail->index = head->index + tail;
>  
> -	/* Page flags must be visible before we make the page non-compound. */
> +	/*
> +	 * Page flags must be visible before we make the page non-compound or
> +	 * a compound page in new_order.
> +	 */
>  	smp_wmb();
>  
>  	/*
> @@ -2339,10 +2345,15 @@ static void __split_huge_page_tail(struct page *head, int tail,
>  	 * which needs correct compound_head().
>  	 */
>  	clear_compound_head(page_tail);
> +	if (new_order) {
> +		prep_compound_page(page_tail, new_order);
> +		prep_transhuge_page(page_tail);
> +	}

Many thanks for your series. It looks really good. One question:
IIUC, It seems there has assumption that LRU compound_pages should
be PageTransHuge. So PageTransHuge just checks PageHead:

static inline int PageTransHuge(struct page *page)
{
	VM_BUG_ON_PAGE(PageTail(page), page);
	return PageHead(page);
}

So LRU pages with any order( > 0) will might be wrongly treated as THP which
has order = HPAGE_PMD_ORDER. We should ensure thp_nr_pages is used instead of
hard coded HPAGE_PMD_ORDER.

Looks at the below code snippet:
mm/mempolicy.c:
static struct page *new_page(struct page *page, unsigned long start)
{
...
	} else if (PageTransHuge(page)) {
		struct page *thp;

		thp = alloc_hugepage_vma(GFP_TRANSHUGE, vma, address,
					 HPAGE_PMD_ORDER);
					 ^^^^^^^^^^^^^^^^
		if (!thp)
			return NULL;
		prep_transhuge_page(thp);
		return thp;
	}
...
}

HPAGE_PMD_ORDER is used instead of thp_nr_pages. So the lower order pages might be
used as if its order is HPAGE_PMD_ORDER. All of such usage might need to be fixed.
Or am I miss something ?

Thanks again for your work. :)

>  
>  	/* Finally unfreeze refcount. Additional reference from page cache. */
> -	page_ref_unfreeze(page_tail, 1 + (!PageAnon(head) ||
> -					  PageSwapCache(head)));
> +	page_ref_unfreeze(page_tail, 1 + ((!PageAnon(head) ||
> +					   PageSwapCache(head)) ?
> +						thp_nr_pages(page_tail) : 0));
>  
>  	if (page_is_young(head))
>  		set_page_young(page_tail);
> @@ -2360,7 +2371,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>  }
>  
>  static void __split_huge_page(struct page *page, struct list_head *list,
> -		pgoff_t end)
> +		pgoff_t end, unsigned int new_order)
>  {
>  	struct folio *folio = page_folio(page);
>  	struct page *head = &folio->page;
> @@ -2369,10 +2380,11 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>  	unsigned long offset = 0;
>  	unsigned int order = thp_order(head);
>  	unsigned int nr = thp_nr_pages(head);
> +	unsigned int new_nr = 1 << new_order;
>  	int i;
>  
>  	/* complete memcg works before add pages to LRU */
> -	split_page_memcg(head, nr, 0);
> +	split_page_memcg(head, nr, new_order);
>  
>  	if (PageAnon(head) && PageSwapCache(head)) {
>  		swp_entry_t entry = { .val = page_private(head) };
> @@ -2387,42 +2399,50 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>  
>  	ClearPageHasHWPoisoned(head);
>  
> -	for (i = nr - 1; i >= 1; i--) {
> -		__split_huge_page_tail(head, i, lruvec, list);
> +	for (i = nr - new_nr; i >= new_nr; i -= new_nr) {
> +		__split_huge_page_tail(head, i, lruvec, list, new_order);
>  		/* Some pages can be beyond EOF: drop them from page cache */
>  		if (head[i].index >= end) {
>  			ClearPageDirty(head + i);
>  			__delete_from_page_cache(head + i, NULL);
>  			if (shmem_mapping(head->mapping))
> -				shmem_uncharge(head->mapping->host, 1);
> +				shmem_uncharge(head->mapping->host, new_nr);
>  			put_page(head + i);
>  		} else if (!PageAnon(page)) {
>  			__xa_store(&head->mapping->i_pages, head[i].index,
>  					head + i, 0);
>  		} else if (swap_cache) {
> +			/*
> +			 * split anonymous THPs (including swapped out ones) to
> +			 * non-zero order not supported
> +			 */
> +			VM_BUG_ON(new_order);
>  			__xa_store(&swap_cache->i_pages, offset + i,
>  					head + i, 0);
>  		}
>  	}
>  
> -	ClearPageCompound(head);
> +	if (!new_order)
> +		ClearPageCompound(head);
> +	else
> +		set_compound_order(head, new_order);
>  	unlock_page_lruvec(lruvec);
>  	/* Caller disabled irqs, so they are still disabled here */
>  
> -	split_page_owner(head, order, 0);
> +	split_page_owner(head, order, new_order);
>  
>  	/* See comment in __split_huge_page_tail() */
>  	if (PageAnon(head)) {
>  		/* Additional pin to swap cache */
>  		if (PageSwapCache(head)) {
> -			page_ref_add(head, 2);
> +			page_ref_add(head, 1 + new_nr);
>  			xa_unlock(&swap_cache->i_pages);
>  		} else {
>  			page_ref_inc(head);
>  		}
>  	} else {
>  		/* Additional pin to page cache */
> -		page_ref_add(head, 2);
> +		page_ref_add(head, 1 + new_nr);
>  		xa_unlock(&head->mapping->i_pages);
>  	}
>  	local_irq_enable();
> @@ -2435,7 +2455,14 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>  		split_swap_cluster(entry);
>  	}
>  
> -	for (i = 0; i < nr; i++) {
> +	/*
> +	 * set page to its compound_head when split to THPs, so that GUP pin and
> +	 * PG_locked are transferred to the right after-split page
> +	 */
> +	if (new_order)
> +		page = compound_head(page);
> +
> +	for (i = 0; i < nr; i += new_nr) {
>  		struct page *subpage = head + i;
>  		if (subpage == page)
>  			continue;
> @@ -2472,36 +2499,60 @@ bool can_split_folio(struct folio *folio, int *pextra_pins)
>   * This function splits huge page into normal pages. @page can point to any
>   * subpage of huge page to split. Split doesn't change the position of @page.
>   *
> + * See split_huge_page_to_list_to_order() for more details.
> + *
> + * Returns 0 if the hugepage is split successfully.
> + * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
> + * us.
> + */
> +int split_huge_page_to_list(struct page *page, struct list_head *list)
> +{
> +	return split_huge_page_to_list_to_order(page, list, 0);
> +}
> +
> +/*
> + * This function splits huge page into pages in @new_order. @page can point to
> + * any subpage of huge page to split. Split doesn't change the position of
> + * @page.
> + *
>   * Only caller must hold pin on the @page, otherwise split fails with -EBUSY.
>   * The huge page must be locked.
>   *
>   * If @list is null, tail pages will be added to LRU list, otherwise, to @list.
>   *
> - * Both head page and tail pages will inherit mapping, flags, and so on from
> - * the hugepage.
> + * Pages in new_order will inherit mapping, flags, and so on from the hugepage.
>   *
> - * GUP pin and PG_locked transferred to @page. Rest subpages can be freed if
> - * they are not mapped.
> + * GUP pin and PG_locked transferred to @page or the compound page @page belongs
> + * to. Rest subpages can be freed if they are not mapped.
>   *
>   * Returns 0 if the hugepage is split successfully.
>   * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
>   * us.
>   */
> -int split_huge_page_to_list(struct page *page, struct list_head *list)
> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
> +				     unsigned int new_order)
>  {
>  	struct folio *folio = page_folio(page);
>  	struct page *head = &folio->page;
>  	struct deferred_split *ds_queue = get_deferred_split_queue(head);
> -	XA_STATE(xas, &head->mapping->i_pages, head->index);
> +	/* reset xarray order to new order after split */
> +	XA_STATE_ORDER(xas, &head->mapping->i_pages, head->index, new_order);
>  	struct anon_vma *anon_vma = NULL;
>  	struct address_space *mapping = NULL;
>  	int extra_pins, ret;
>  	pgoff_t end;
>  
> +	VM_BUG_ON(thp_order(head) <= new_order);
>  	VM_BUG_ON_PAGE(is_huge_zero_page(head), head);
>  	VM_BUG_ON_PAGE(!PageLocked(head), head);
>  	VM_BUG_ON_PAGE(!PageCompound(head), head);
>  
> +	/* Cannot split THP to order-1 (no order-1 THPs) */
> +	VM_BUG_ON(new_order == 1);
> +
> +	/* Split anonymous THP to non-zero order not support */
> +	VM_BUG_ON(PageAnon(head) && new_order);
> +
>  	if (PageWriteback(head))
>  		return -EBUSY;
>  
> @@ -2582,7 +2633,7 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
>  	if (page_ref_freeze(head, 1 + extra_pins)) {
>  		if (!list_empty(page_deferred_list(head))) {
>  			ds_queue->split_queue_len--;
> -			list_del(page_deferred_list(head));
> +			list_del_init(page_deferred_list(head));
>  		}
>  		spin_unlock(&ds_queue->split_queue_lock);
>  		if (mapping) {
> @@ -2592,14 +2643,18 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
>  			if (PageSwapBacked(head)) {
>  				__mod_lruvec_page_state(head, NR_SHMEM_THPS,
>  							-nr);
> -			} else {
> +			} else if (!new_order) {
> +				/*
> +				 * Decrease THP stats only if split to normal
> +				 * pages
> +				 */
>  				__mod_lruvec_page_state(head, NR_FILE_THPS,
>  							-nr);
>  				filemap_nr_thps_dec(mapping);
>  			}
>  		}
>  
> -		__split_huge_page(page, list, end);
> +		__split_huge_page(page, list, end, new_order);
>  		ret = 0;
>  	} else {
>  		spin_unlock(&ds_queue->split_queue_lock);
> 

Re: [RFC PATCH 3/5] mm: thp: split huge page to any lower order pages.

[Zi Yan]

[-- Attachment #1: Type: text/plain, Size: 14400 bytes --]

On 21 Mar 2022, at 23:21, Miaohe Lin wrote:

> On 2022/3/21 22:21, Zi Yan wrote:
>> From: Zi Yan <ziy@nvidia.com>
>>
>> To split a THP to any lower order pages, we need to reform THPs on
>> subpages at given order and add page refcount based on the new page
>> order. Also we need to reinitialize page_deferred_list after removing
>> the page from the split_queue, otherwise a subsequent split will see
>> list corruption when checking the page_deferred_list again.
>>
>> It has many uses, like minimizing the number of pages after
>> truncating a pagecache THP. For anonymous THPs, we can only split them
>> to order-0 like before until we add support for any size anonymous THPs.
>>
>> Signed-off-by: Zi Yan <ziy@nvidia.com>
>> ---
>>  include/linux/huge_mm.h |   8 +++
>>  mm/huge_memory.c        | 111 ++++++++++++++++++++++++++++++----------
>>  2 files changed, 91 insertions(+), 28 deletions(-)
>>
>> diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
>> index 2999190adc22..c7153cd7e9e4 100644
>> --- a/include/linux/huge_mm.h
>> +++ b/include/linux/huge_mm.h
>> @@ -186,6 +186,8 @@ void free_transhuge_page(struct page *page);
>>
>>  bool can_split_folio(struct folio *folio, int *pextra_pins);
>>  int split_huge_page_to_list(struct page *page, struct list_head *list);
>> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>> +		unsigned int new_order);
>>  static inline int split_huge_page(struct page *page)
>>  {
>>  	return split_huge_page_to_list(page, NULL);
>> @@ -355,6 +357,12 @@ split_huge_page_to_list(struct page *page, struct list_head *list)
>>  {
>>  	return 0;
>>  }
>> +static inline int
>> +split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>> +		unsigned int new_order)
>> +{
>> +	return 0;
>> +}
>>  static inline int split_huge_page(struct page *page)
>>  {
>>  	return 0;
>> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
>> index fcfa46af6c4c..3617aa3ad0b1 100644
>> --- a/mm/huge_memory.c
>> +++ b/mm/huge_memory.c
>> @@ -2236,11 +2236,13 @@ void vma_adjust_trans_huge(struct vm_area_struct *vma,
>>  static void unmap_page(struct page *page)
>>  {
>>  	struct folio *folio = page_folio(page);
>> -	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SPLIT_HUGE_PMD |
>> -		TTU_SYNC;
>> +	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SYNC;
>>
>>  	VM_BUG_ON_PAGE(!PageHead(page), page);
>>
>> +	if (folio_order(folio) >= HPAGE_PMD_ORDER)
>> +		ttu_flags |= TTU_SPLIT_HUGE_PMD;
>> +
>>  	/*
>>  	 * Anon pages need migration entries to preserve them, but file
>>  	 * pages can simply be left unmapped, then faulted back on demand.
>> @@ -2254,9 +2256,9 @@ static void unmap_page(struct page *page)
>>  	VM_WARN_ON_ONCE_PAGE(page_mapped(page), page);
>>  }
>>
>> -static void remap_page(struct folio *folio, unsigned long nr)
>> +static void remap_page(struct folio *folio, unsigned short nr)
>>  {
>> -	int i = 0;
>> +	unsigned int i;
>>
>>  	/* If unmap_page() uses try_to_migrate() on file, remove this check */
>>  	if (!folio_test_anon(folio))
>> @@ -2274,7 +2276,6 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>>  		struct lruvec *lruvec, struct list_head *list)
>>  {
>>  	VM_BUG_ON_PAGE(!PageHead(head), head);
>> -	VM_BUG_ON_PAGE(PageCompound(tail), head);
>>  	VM_BUG_ON_PAGE(PageLRU(tail), head);
>>  	lockdep_assert_held(&lruvec->lru_lock);
>>
>> @@ -2295,9 +2296,10 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>>  }
>>
>>  static void __split_huge_page_tail(struct page *head, int tail,
>> -		struct lruvec *lruvec, struct list_head *list)
>> +		struct lruvec *lruvec, struct list_head *list, unsigned int new_order)
>>  {
>>  	struct page *page_tail = head + tail;
>> +	unsigned long compound_head_flag = new_order ? (1L << PG_head) : 0;
>>
>>  	VM_BUG_ON_PAGE(atomic_read(&page_tail->_mapcount) != -1, page_tail);
>>
>> @@ -2321,6 +2323,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>  #ifdef CONFIG_64BIT
>>  			 (1L << PG_arch_2) |
>>  #endif
>> +			 compound_head_flag |
>>  			 (1L << PG_dirty)));
>>
>>  	/* ->mapping in first tail page is compound_mapcount */
>> @@ -2329,7 +2332,10 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>  	page_tail->mapping = head->mapping;
>>  	page_tail->index = head->index + tail;
>>
>> -	/* Page flags must be visible before we make the page non-compound. */
>> +	/*
>> +	 * Page flags must be visible before we make the page non-compound or
>> +	 * a compound page in new_order.
>> +	 */
>>  	smp_wmb();
>>
>>  	/*
>> @@ -2339,10 +2345,15 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>  	 * which needs correct compound_head().
>>  	 */
>>  	clear_compound_head(page_tail);
>> +	if (new_order) {
>> +		prep_compound_page(page_tail, new_order);
>> +		prep_transhuge_page(page_tail);
>> +	}
>
> Many thanks for your series. It looks really good. One question:
> IIUC, It seems there has assumption that LRU compound_pages should
> be PageTransHuge. So PageTransHuge just checks PageHead:
>
> static inline int PageTransHuge(struct page *page)
> {
> 	VM_BUG_ON_PAGE(PageTail(page), page);
> 	return PageHead(page);
> }
>
> So LRU pages with any order( > 0) will might be wrongly treated as THP which
> has order = HPAGE_PMD_ORDER. We should ensure thp_nr_pages is used instead of
> hard coded HPAGE_PMD_ORDER.
>
> Looks at the below code snippet:
> mm/mempolicy.c:
> static struct page *new_page(struct page *page, unsigned long start)
> {
> ...
> 	} else if (PageTransHuge(page)) {
> 		struct page *thp;
>
> 		thp = alloc_hugepage_vma(GFP_TRANSHUGE, vma, address,
> 					 HPAGE_PMD_ORDER);
> 					 ^^^^^^^^^^^^^^^^
> 		if (!thp)
> 			return NULL;
> 		prep_transhuge_page(thp);
> 		return thp;
> 	}
> ...
> }
>
> HPAGE_PMD_ORDER is used instead of thp_nr_pages. So the lower order pages might be
> used as if its order is HPAGE_PMD_ORDER. All of such usage might need to be fixed.
> Or am I miss something ?
>
> Thanks again for your work. :)

THP will still only have HPAGE_PMD_ORDER and will not be split into any order
other than 0. This series only allows to split huge page cache folio (added by Matthew)
into any lower order. I have an explicit VM_BUG_ON() to ensure new_order
is only 0 when non page cache page is the input. Since there is still non-trivial
amount of work to add any order THP support in the kernel. IIRC, Yu Zhao (cc’d) was
planning to work on that.

Thanks for checking the patches.

>>
>>  	/* Finally unfreeze refcount. Additional reference from page cache. */
>> -	page_ref_unfreeze(page_tail, 1 + (!PageAnon(head) ||
>> -					  PageSwapCache(head)));
>> +	page_ref_unfreeze(page_tail, 1 + ((!PageAnon(head) ||
>> +					   PageSwapCache(head)) ?
>> +						thp_nr_pages(page_tail) : 0));
>>
>>  	if (page_is_young(head))
>>  		set_page_young(page_tail);
>> @@ -2360,7 +2371,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>  }
>>
>>  static void __split_huge_page(struct page *page, struct list_head *list,
>> -		pgoff_t end)
>> +		pgoff_t end, unsigned int new_order)
>>  {
>>  	struct folio *folio = page_folio(page);
>>  	struct page *head = &folio->page;
>> @@ -2369,10 +2380,11 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>>  	unsigned long offset = 0;
>>  	unsigned int order = thp_order(head);
>>  	unsigned int nr = thp_nr_pages(head);
>> +	unsigned int new_nr = 1 << new_order;
>>  	int i;
>>
>>  	/* complete memcg works before add pages to LRU */
>> -	split_page_memcg(head, nr, 0);
>> +	split_page_memcg(head, nr, new_order);
>>
>>  	if (PageAnon(head) && PageSwapCache(head)) {
>>  		swp_entry_t entry = { .val = page_private(head) };
>> @@ -2387,42 +2399,50 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>>
>>  	ClearPageHasHWPoisoned(head);
>>
>> -	for (i = nr - 1; i >= 1; i--) {
>> -		__split_huge_page_tail(head, i, lruvec, list);
>> +	for (i = nr - new_nr; i >= new_nr; i -= new_nr) {
>> +		__split_huge_page_tail(head, i, lruvec, list, new_order);
>>  		/* Some pages can be beyond EOF: drop them from page cache */
>>  		if (head[i].index >= end) {
>>  			ClearPageDirty(head + i);
>>  			__delete_from_page_cache(head + i, NULL);
>>  			if (shmem_mapping(head->mapping))
>> -				shmem_uncharge(head->mapping->host, 1);
>> +				shmem_uncharge(head->mapping->host, new_nr);
>>  			put_page(head + i);
>>  		} else if (!PageAnon(page)) {
>>  			__xa_store(&head->mapping->i_pages, head[i].index,
>>  					head + i, 0);
>>  		} else if (swap_cache) {
>> +			/*
>> +			 * split anonymous THPs (including swapped out ones) to
>> +			 * non-zero order not supported
>> +			 */
>> +			VM_BUG_ON(new_order);
>>  			__xa_store(&swap_cache->i_pages, offset + i,
>>  					head + i, 0);
>>  		}
>>  	}
>>
>> -	ClearPageCompound(head);
>> +	if (!new_order)
>> +		ClearPageCompound(head);
>> +	else
>> +		set_compound_order(head, new_order);
>>  	unlock_page_lruvec(lruvec);
>>  	/* Caller disabled irqs, so they are still disabled here */
>>
>> -	split_page_owner(head, order, 0);
>> +	split_page_owner(head, order, new_order);
>>
>>  	/* See comment in __split_huge_page_tail() */
>>  	if (PageAnon(head)) {
>>  		/* Additional pin to swap cache */
>>  		if (PageSwapCache(head)) {
>> -			page_ref_add(head, 2);
>> +			page_ref_add(head, 1 + new_nr);
>>  			xa_unlock(&swap_cache->i_pages);
>>  		} else {
>>  			page_ref_inc(head);
>>  		}
>>  	} else {
>>  		/* Additional pin to page cache */
>> -		page_ref_add(head, 2);
>> +		page_ref_add(head, 1 + new_nr);
>>  		xa_unlock(&head->mapping->i_pages);
>>  	}
>>  	local_irq_enable();
>> @@ -2435,7 +2455,14 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>>  		split_swap_cluster(entry);
>>  	}
>>
>> -	for (i = 0; i < nr; i++) {
>> +	/*
>> +	 * set page to its compound_head when split to THPs, so that GUP pin and
>> +	 * PG_locked are transferred to the right after-split page
>> +	 */
>> +	if (new_order)
>> +		page = compound_head(page);
>> +
>> +	for (i = 0; i < nr; i += new_nr) {
>>  		struct page *subpage = head + i;
>>  		if (subpage == page)
>>  			continue;
>> @@ -2472,36 +2499,60 @@ bool can_split_folio(struct folio *folio, int *pextra_pins)
>>   * This function splits huge page into normal pages. @page can point to any
>>   * subpage of huge page to split. Split doesn't change the position of @page.
>>   *
>> + * See split_huge_page_to_list_to_order() for more details.
>> + *
>> + * Returns 0 if the hugepage is split successfully.
>> + * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
>> + * us.
>> + */
>> +int split_huge_page_to_list(struct page *page, struct list_head *list)
>> +{
>> +	return split_huge_page_to_list_to_order(page, list, 0);
>> +}
>> +
>> +/*
>> + * This function splits huge page into pages in @new_order. @page can point to
>> + * any subpage of huge page to split. Split doesn't change the position of
>> + * @page.
>> + *
>>   * Only caller must hold pin on the @page, otherwise split fails with -EBUSY.
>>   * The huge page must be locked.
>>   *
>>   * If @list is null, tail pages will be added to LRU list, otherwise, to @list.
>>   *
>> - * Both head page and tail pages will inherit mapping, flags, and so on from
>> - * the hugepage.
>> + * Pages in new_order will inherit mapping, flags, and so on from the hugepage.
>>   *
>> - * GUP pin and PG_locked transferred to @page. Rest subpages can be freed if
>> - * they are not mapped.
>> + * GUP pin and PG_locked transferred to @page or the compound page @page belongs
>> + * to. Rest subpages can be freed if they are not mapped.
>>   *
>>   * Returns 0 if the hugepage is split successfully.
>>   * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
>>   * us.
>>   */
>> -int split_huge_page_to_list(struct page *page, struct list_head *list)
>> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>> +				     unsigned int new_order)
>>  {
>>  	struct folio *folio = page_folio(page);
>>  	struct page *head = &folio->page;
>>  	struct deferred_split *ds_queue = get_deferred_split_queue(head);
>> -	XA_STATE(xas, &head->mapping->i_pages, head->index);
>> +	/* reset xarray order to new order after split */
>> +	XA_STATE_ORDER(xas, &head->mapping->i_pages, head->index, new_order);
>>  	struct anon_vma *anon_vma = NULL;
>>  	struct address_space *mapping = NULL;
>>  	int extra_pins, ret;
>>  	pgoff_t end;
>>
>> +	VM_BUG_ON(thp_order(head) <= new_order);
>>  	VM_BUG_ON_PAGE(is_huge_zero_page(head), head);
>>  	VM_BUG_ON_PAGE(!PageLocked(head), head);
>>  	VM_BUG_ON_PAGE(!PageCompound(head), head);
>>
>> +	/* Cannot split THP to order-1 (no order-1 THPs) */
>> +	VM_BUG_ON(new_order == 1);
>> +
>> +	/* Split anonymous THP to non-zero order not support */
>> +	VM_BUG_ON(PageAnon(head) && new_order);
>> +
>>  	if (PageWriteback(head))
>>  		return -EBUSY;
>>
>> @@ -2582,7 +2633,7 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
>>  	if (page_ref_freeze(head, 1 + extra_pins)) {
>>  		if (!list_empty(page_deferred_list(head))) {
>>  			ds_queue->split_queue_len--;
>> -			list_del(page_deferred_list(head));
>> +			list_del_init(page_deferred_list(head));
>>  		}
>>  		spin_unlock(&ds_queue->split_queue_lock);
>>  		if (mapping) {
>> @@ -2592,14 +2643,18 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
>>  			if (PageSwapBacked(head)) {
>>  				__mod_lruvec_page_state(head, NR_SHMEM_THPS,
>>  							-nr);
>> -			} else {
>> +			} else if (!new_order) {
>> +				/*
>> +				 * Decrease THP stats only if split to normal
>> +				 * pages
>> +				 */
>>  				__mod_lruvec_page_state(head, NR_FILE_THPS,
>>  							-nr);
>>  				filemap_nr_thps_dec(mapping);
>>  			}
>>  		}
>>
>> -		__split_huge_page(page, list, end);
>> +		__split_huge_page(page, list, end, new_order);
>>  		ret = 0;
>>  	} else {
>>  		spin_unlock(&ds_queue->split_queue_lock);
>>


--
Best Regards,
Yan, Zi

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 854 bytes --]

Re: [RFC PATCH 3/5] mm: thp: split huge page to any lower order pages.

[Zi Yan]

[-- Attachment #1: Type: text/plain, Size: 14426 bytes --]

On 21 Mar 2022, at 23:21, Miaohe Lin wrote:

> On 2022/3/21 22:21, Zi Yan wrote:
>> From: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>>
>> To split a THP to any lower order pages, we need to reform THPs on
>> subpages at given order and add page refcount based on the new page
>> order. Also we need to reinitialize page_deferred_list after removing
>> the page from the split_queue, otherwise a subsequent split will see
>> list corruption when checking the page_deferred_list again.
>>
>> It has many uses, like minimizing the number of pages after
>> truncating a pagecache THP. For anonymous THPs, we can only split them
>> to order-0 like before until we add support for any size anonymous THPs.
>>
>> Signed-off-by: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>> ---
>>  include/linux/huge_mm.h |   8 +++
>>  mm/huge_memory.c        | 111 ++++++++++++++++++++++++++++++----------
>>  2 files changed, 91 insertions(+), 28 deletions(-)
>>
>> diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
>> index 2999190adc22..c7153cd7e9e4 100644
>> --- a/include/linux/huge_mm.h
>> +++ b/include/linux/huge_mm.h
>> @@ -186,6 +186,8 @@ void free_transhuge_page(struct page *page);
>>
>>  bool can_split_folio(struct folio *folio, int *pextra_pins);
>>  int split_huge_page_to_list(struct page *page, struct list_head *list);
>> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>> +		unsigned int new_order);
>>  static inline int split_huge_page(struct page *page)
>>  {
>>  	return split_huge_page_to_list(page, NULL);
>> @@ -355,6 +357,12 @@ split_huge_page_to_list(struct page *page, struct list_head *list)
>>  {
>>  	return 0;
>>  }
>> +static inline int
>> +split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>> +		unsigned int new_order)
>> +{
>> +	return 0;
>> +}
>>  static inline int split_huge_page(struct page *page)
>>  {
>>  	return 0;
>> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
>> index fcfa46af6c4c..3617aa3ad0b1 100644
>> --- a/mm/huge_memory.c
>> +++ b/mm/huge_memory.c
>> @@ -2236,11 +2236,13 @@ void vma_adjust_trans_huge(struct vm_area_struct *vma,
>>  static void unmap_page(struct page *page)
>>  {
>>  	struct folio *folio = page_folio(page);
>> -	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SPLIT_HUGE_PMD |
>> -		TTU_SYNC;
>> +	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SYNC;
>>
>>  	VM_BUG_ON_PAGE(!PageHead(page), page);
>>
>> +	if (folio_order(folio) >= HPAGE_PMD_ORDER)
>> +		ttu_flags |= TTU_SPLIT_HUGE_PMD;
>> +
>>  	/*
>>  	 * Anon pages need migration entries to preserve them, but file
>>  	 * pages can simply be left unmapped, then faulted back on demand.
>> @@ -2254,9 +2256,9 @@ static void unmap_page(struct page *page)
>>  	VM_WARN_ON_ONCE_PAGE(page_mapped(page), page);
>>  }
>>
>> -static void remap_page(struct folio *folio, unsigned long nr)
>> +static void remap_page(struct folio *folio, unsigned short nr)
>>  {
>> -	int i = 0;
>> +	unsigned int i;
>>
>>  	/* If unmap_page() uses try_to_migrate() on file, remove this check */
>>  	if (!folio_test_anon(folio))
>> @@ -2274,7 +2276,6 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>>  		struct lruvec *lruvec, struct list_head *list)
>>  {
>>  	VM_BUG_ON_PAGE(!PageHead(head), head);
>> -	VM_BUG_ON_PAGE(PageCompound(tail), head);
>>  	VM_BUG_ON_PAGE(PageLRU(tail), head);
>>  	lockdep_assert_held(&lruvec->lru_lock);
>>
>> @@ -2295,9 +2296,10 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>>  }
>>
>>  static void __split_huge_page_tail(struct page *head, int tail,
>> -		struct lruvec *lruvec, struct list_head *list)
>> +		struct lruvec *lruvec, struct list_head *list, unsigned int new_order)
>>  {
>>  	struct page *page_tail = head + tail;
>> +	unsigned long compound_head_flag = new_order ? (1L << PG_head) : 0;
>>
>>  	VM_BUG_ON_PAGE(atomic_read(&page_tail->_mapcount) != -1, page_tail);
>>
>> @@ -2321,6 +2323,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>  #ifdef CONFIG_64BIT
>>  			 (1L << PG_arch_2) |
>>  #endif
>> +			 compound_head_flag |
>>  			 (1L << PG_dirty)));
>>
>>  	/* ->mapping in first tail page is compound_mapcount */
>> @@ -2329,7 +2332,10 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>  	page_tail->mapping = head->mapping;
>>  	page_tail->index = head->index + tail;
>>
>> -	/* Page flags must be visible before we make the page non-compound. */
>> +	/*
>> +	 * Page flags must be visible before we make the page non-compound or
>> +	 * a compound page in new_order.
>> +	 */
>>  	smp_wmb();
>>
>>  	/*
>> @@ -2339,10 +2345,15 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>  	 * which needs correct compound_head().
>>  	 */
>>  	clear_compound_head(page_tail);
>> +	if (new_order) {
>> +		prep_compound_page(page_tail, new_order);
>> +		prep_transhuge_page(page_tail);
>> +	}
>
> Many thanks for your series. It looks really good. One question:
> IIUC, It seems there has assumption that LRU compound_pages should
> be PageTransHuge. So PageTransHuge just checks PageHead:
>
> static inline int PageTransHuge(struct page *page)
> {
> 	VM_BUG_ON_PAGE(PageTail(page), page);
> 	return PageHead(page);
> }
>
> So LRU pages with any order( > 0) will might be wrongly treated as THP which
> has order = HPAGE_PMD_ORDER. We should ensure thp_nr_pages is used instead of
> hard coded HPAGE_PMD_ORDER.
>
> Looks at the below code snippet:
> mm/mempolicy.c:
> static struct page *new_page(struct page *page, unsigned long start)
> {
> ...
> 	} else if (PageTransHuge(page)) {
> 		struct page *thp;
>
> 		thp = alloc_hugepage_vma(GFP_TRANSHUGE, vma, address,
> 					 HPAGE_PMD_ORDER);
> 					 ^^^^^^^^^^^^^^^^
> 		if (!thp)
> 			return NULL;
> 		prep_transhuge_page(thp);
> 		return thp;
> 	}
> ...
> }
>
> HPAGE_PMD_ORDER is used instead of thp_nr_pages. So the lower order pages might be
> used as if its order is HPAGE_PMD_ORDER. All of such usage might need to be fixed.
> Or am I miss something ?
>
> Thanks again for your work. :)

THP will still only have HPAGE_PMD_ORDER and will not be split into any order
other than 0. This series only allows to split huge page cache folio (added by Matthew)
into any lower order. I have an explicit VM_BUG_ON() to ensure new_order
is only 0 when non page cache page is the input. Since there is still non-trivial
amount of work to add any order THP support in the kernel. IIRC, Yu Zhao (cc’d) was
planning to work on that.

Thanks for checking the patches.

>>
>>  	/* Finally unfreeze refcount. Additional reference from page cache. */
>> -	page_ref_unfreeze(page_tail, 1 + (!PageAnon(head) ||
>> -					  PageSwapCache(head)));
>> +	page_ref_unfreeze(page_tail, 1 + ((!PageAnon(head) ||
>> +					   PageSwapCache(head)) ?
>> +						thp_nr_pages(page_tail) : 0));
>>
>>  	if (page_is_young(head))
>>  		set_page_young(page_tail);
>> @@ -2360,7 +2371,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>  }
>>
>>  static void __split_huge_page(struct page *page, struct list_head *list,
>> -		pgoff_t end)
>> +		pgoff_t end, unsigned int new_order)
>>  {
>>  	struct folio *folio = page_folio(page);
>>  	struct page *head = &folio->page;
>> @@ -2369,10 +2380,11 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>>  	unsigned long offset = 0;
>>  	unsigned int order = thp_order(head);
>>  	unsigned int nr = thp_nr_pages(head);
>> +	unsigned int new_nr = 1 << new_order;
>>  	int i;
>>
>>  	/* complete memcg works before add pages to LRU */
>> -	split_page_memcg(head, nr, 0);
>> +	split_page_memcg(head, nr, new_order);
>>
>>  	if (PageAnon(head) && PageSwapCache(head)) {
>>  		swp_entry_t entry = { .val = page_private(head) };
>> @@ -2387,42 +2399,50 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>>
>>  	ClearPageHasHWPoisoned(head);
>>
>> -	for (i = nr - 1; i >= 1; i--) {
>> -		__split_huge_page_tail(head, i, lruvec, list);
>> +	for (i = nr - new_nr; i >= new_nr; i -= new_nr) {
>> +		__split_huge_page_tail(head, i, lruvec, list, new_order);
>>  		/* Some pages can be beyond EOF: drop them from page cache */
>>  		if (head[i].index >= end) {
>>  			ClearPageDirty(head + i);
>>  			__delete_from_page_cache(head + i, NULL);
>>  			if (shmem_mapping(head->mapping))
>> -				shmem_uncharge(head->mapping->host, 1);
>> +				shmem_uncharge(head->mapping->host, new_nr);
>>  			put_page(head + i);
>>  		} else if (!PageAnon(page)) {
>>  			__xa_store(&head->mapping->i_pages, head[i].index,
>>  					head + i, 0);
>>  		} else if (swap_cache) {
>> +			/*
>> +			 * split anonymous THPs (including swapped out ones) to
>> +			 * non-zero order not supported
>> +			 */
>> +			VM_BUG_ON(new_order);
>>  			__xa_store(&swap_cache->i_pages, offset + i,
>>  					head + i, 0);
>>  		}
>>  	}
>>
>> -	ClearPageCompound(head);
>> +	if (!new_order)
>> +		ClearPageCompound(head);
>> +	else
>> +		set_compound_order(head, new_order);
>>  	unlock_page_lruvec(lruvec);
>>  	/* Caller disabled irqs, so they are still disabled here */
>>
>> -	split_page_owner(head, order, 0);
>> +	split_page_owner(head, order, new_order);
>>
>>  	/* See comment in __split_huge_page_tail() */
>>  	if (PageAnon(head)) {
>>  		/* Additional pin to swap cache */
>>  		if (PageSwapCache(head)) {
>> -			page_ref_add(head, 2);
>> +			page_ref_add(head, 1 + new_nr);
>>  			xa_unlock(&swap_cache->i_pages);
>>  		} else {
>>  			page_ref_inc(head);
>>  		}
>>  	} else {
>>  		/* Additional pin to page cache */
>> -		page_ref_add(head, 2);
>> +		page_ref_add(head, 1 + new_nr);
>>  		xa_unlock(&head->mapping->i_pages);
>>  	}
>>  	local_irq_enable();
>> @@ -2435,7 +2455,14 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>>  		split_swap_cluster(entry);
>>  	}
>>
>> -	for (i = 0; i < nr; i++) {
>> +	/*
>> +	 * set page to its compound_head when split to THPs, so that GUP pin and
>> +	 * PG_locked are transferred to the right after-split page
>> +	 */
>> +	if (new_order)
>> +		page = compound_head(page);
>> +
>> +	for (i = 0; i < nr; i += new_nr) {
>>  		struct page *subpage = head + i;
>>  		if (subpage == page)
>>  			continue;
>> @@ -2472,36 +2499,60 @@ bool can_split_folio(struct folio *folio, int *pextra_pins)
>>   * This function splits huge page into normal pages. @page can point to any
>>   * subpage of huge page to split. Split doesn't change the position of @page.
>>   *
>> + * See split_huge_page_to_list_to_order() for more details.
>> + *
>> + * Returns 0 if the hugepage is split successfully.
>> + * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
>> + * us.
>> + */
>> +int split_huge_page_to_list(struct page *page, struct list_head *list)
>> +{
>> +	return split_huge_page_to_list_to_order(page, list, 0);
>> +}
>> +
>> +/*
>> + * This function splits huge page into pages in @new_order. @page can point to
>> + * any subpage of huge page to split. Split doesn't change the position of
>> + * @page.
>> + *
>>   * Only caller must hold pin on the @page, otherwise split fails with -EBUSY.
>>   * The huge page must be locked.
>>   *
>>   * If @list is null, tail pages will be added to LRU list, otherwise, to @list.
>>   *
>> - * Both head page and tail pages will inherit mapping, flags, and so on from
>> - * the hugepage.
>> + * Pages in new_order will inherit mapping, flags, and so on from the hugepage.
>>   *
>> - * GUP pin and PG_locked transferred to @page. Rest subpages can be freed if
>> - * they are not mapped.
>> + * GUP pin and PG_locked transferred to @page or the compound page @page belongs
>> + * to. Rest subpages can be freed if they are not mapped.
>>   *
>>   * Returns 0 if the hugepage is split successfully.
>>   * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
>>   * us.
>>   */
>> -int split_huge_page_to_list(struct page *page, struct list_head *list)
>> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>> +				     unsigned int new_order)
>>  {
>>  	struct folio *folio = page_folio(page);
>>  	struct page *head = &folio->page;
>>  	struct deferred_split *ds_queue = get_deferred_split_queue(head);
>> -	XA_STATE(xas, &head->mapping->i_pages, head->index);
>> +	/* reset xarray order to new order after split */
>> +	XA_STATE_ORDER(xas, &head->mapping->i_pages, head->index, new_order);
>>  	struct anon_vma *anon_vma = NULL;
>>  	struct address_space *mapping = NULL;
>>  	int extra_pins, ret;
>>  	pgoff_t end;
>>
>> +	VM_BUG_ON(thp_order(head) <= new_order);
>>  	VM_BUG_ON_PAGE(is_huge_zero_page(head), head);
>>  	VM_BUG_ON_PAGE(!PageLocked(head), head);
>>  	VM_BUG_ON_PAGE(!PageCompound(head), head);
>>
>> +	/* Cannot split THP to order-1 (no order-1 THPs) */
>> +	VM_BUG_ON(new_order == 1);
>> +
>> +	/* Split anonymous THP to non-zero order not support */
>> +	VM_BUG_ON(PageAnon(head) && new_order);
>> +
>>  	if (PageWriteback(head))
>>  		return -EBUSY;
>>
>> @@ -2582,7 +2633,7 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
>>  	if (page_ref_freeze(head, 1 + extra_pins)) {
>>  		if (!list_empty(page_deferred_list(head))) {
>>  			ds_queue->split_queue_len--;
>> -			list_del(page_deferred_list(head));
>> +			list_del_init(page_deferred_list(head));
>>  		}
>>  		spin_unlock(&ds_queue->split_queue_lock);
>>  		if (mapping) {
>> @@ -2592,14 +2643,18 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
>>  			if (PageSwapBacked(head)) {
>>  				__mod_lruvec_page_state(head, NR_SHMEM_THPS,
>>  							-nr);
>> -			} else {
>> +			} else if (!new_order) {
>> +				/*
>> +				 * Decrease THP stats only if split to normal
>> +				 * pages
>> +				 */
>>  				__mod_lruvec_page_state(head, NR_FILE_THPS,
>>  							-nr);
>>  				filemap_nr_thps_dec(mapping);
>>  			}
>>  		}
>>
>> -		__split_huge_page(page, list, end);
>> +		__split_huge_page(page, list, end, new_order);
>>  		ret = 0;
>>  	} else {
>>  		spin_unlock(&ds_queue->split_queue_lock);
>>

Re: [RFC PATCH 3/5] mm: thp: split huge page to any lower order pages.

[Miaohe Lin]

On 2022/3/22 22:30, Zi Yan wrote:
> On 21 Mar 2022, at 23:21, Miaohe Lin wrote:
> 
>> On 2022/3/21 22:21, Zi Yan wrote:
>>> From: Zi Yan <ziy@nvidia.com>
>>>
>>> To split a THP to any lower order pages, we need to reform THPs on
>>> subpages at given order and add page refcount based on the new page
>>> order. Also we need to reinitialize page_deferred_list after removing
>>> the page from the split_queue, otherwise a subsequent split will see
>>> list corruption when checking the page_deferred_list again.
>>>
>>> It has many uses, like minimizing the number of pages after
>>> truncating a pagecache THP. For anonymous THPs, we can only split them
>>> to order-0 like before until we add support for any size anonymous THPs.
>>>
>>> Signed-off-by: Zi Yan <ziy@nvidia.com>
>>> ---
>>>  include/linux/huge_mm.h |   8 +++
>>>  mm/huge_memory.c        | 111 ++++++++++++++++++++++++++++++----------
>>>  2 files changed, 91 insertions(+), 28 deletions(-)
>>>
>>> diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
>>> index 2999190adc22..c7153cd7e9e4 100644
>>> --- a/include/linux/huge_mm.h
>>> +++ b/include/linux/huge_mm.h
>>> @@ -186,6 +186,8 @@ void free_transhuge_page(struct page *page);
>>>
>>>  bool can_split_folio(struct folio *folio, int *pextra_pins);
>>>  int split_huge_page_to_list(struct page *page, struct list_head *list);
>>> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>>> +		unsigned int new_order);
>>>  static inline int split_huge_page(struct page *page)
>>>  {
>>>  	return split_huge_page_to_list(page, NULL);
>>> @@ -355,6 +357,12 @@ split_huge_page_to_list(struct page *page, struct list_head *list)
>>>  {
>>>  	return 0;
>>>  }
>>> +static inline int
>>> +split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>>> +		unsigned int new_order)
>>> +{
>>> +	return 0;
>>> +}
>>>  static inline int split_huge_page(struct page *page)
>>>  {
>>>  	return 0;
>>> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
>>> index fcfa46af6c4c..3617aa3ad0b1 100644
>>> --- a/mm/huge_memory.c
>>> +++ b/mm/huge_memory.c
>>> @@ -2236,11 +2236,13 @@ void vma_adjust_trans_huge(struct vm_area_struct *vma,
>>>  static void unmap_page(struct page *page)
>>>  {
>>>  	struct folio *folio = page_folio(page);
>>> -	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SPLIT_HUGE_PMD |
>>> -		TTU_SYNC;
>>> +	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SYNC;
>>>
>>>  	VM_BUG_ON_PAGE(!PageHead(page), page);
>>>
>>> +	if (folio_order(folio) >= HPAGE_PMD_ORDER)
>>> +		ttu_flags |= TTU_SPLIT_HUGE_PMD;
>>> +
>>>  	/*
>>>  	 * Anon pages need migration entries to preserve them, but file
>>>  	 * pages can simply be left unmapped, then faulted back on demand.
>>> @@ -2254,9 +2256,9 @@ static void unmap_page(struct page *page)
>>>  	VM_WARN_ON_ONCE_PAGE(page_mapped(page), page);
>>>  }
>>>
>>> -static void remap_page(struct folio *folio, unsigned long nr)
>>> +static void remap_page(struct folio *folio, unsigned short nr)
>>>  {
>>> -	int i = 0;
>>> +	unsigned int i;
>>>
>>>  	/* If unmap_page() uses try_to_migrate() on file, remove this check */
>>>  	if (!folio_test_anon(folio))
>>> @@ -2274,7 +2276,6 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>>>  		struct lruvec *lruvec, struct list_head *list)
>>>  {
>>>  	VM_BUG_ON_PAGE(!PageHead(head), head);
>>> -	VM_BUG_ON_PAGE(PageCompound(tail), head);
>>>  	VM_BUG_ON_PAGE(PageLRU(tail), head);
>>>  	lockdep_assert_held(&lruvec->lru_lock);
>>>
>>> @@ -2295,9 +2296,10 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>>>  }
>>>
>>>  static void __split_huge_page_tail(struct page *head, int tail,
>>> -		struct lruvec *lruvec, struct list_head *list)
>>> +		struct lruvec *lruvec, struct list_head *list, unsigned int new_order)
>>>  {
>>>  	struct page *page_tail = head + tail;
>>> +	unsigned long compound_head_flag = new_order ? (1L << PG_head) : 0;
>>>
>>>  	VM_BUG_ON_PAGE(atomic_read(&page_tail->_mapcount) != -1, page_tail);
>>>
>>> @@ -2321,6 +2323,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>>  #ifdef CONFIG_64BIT
>>>  			 (1L << PG_arch_2) |
>>>  #endif
>>> +			 compound_head_flag |
>>>  			 (1L << PG_dirty)));
>>>
>>>  	/* ->mapping in first tail page is compound_mapcount */
>>> @@ -2329,7 +2332,10 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>>  	page_tail->mapping = head->mapping;
>>>  	page_tail->index = head->index + tail;
>>>
>>> -	/* Page flags must be visible before we make the page non-compound. */
>>> +	/*
>>> +	 * Page flags must be visible before we make the page non-compound or
>>> +	 * a compound page in new_order.
>>> +	 */
>>>  	smp_wmb();
>>>
>>>  	/*
>>> @@ -2339,10 +2345,15 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>>  	 * which needs correct compound_head().
>>>  	 */
>>>  	clear_compound_head(page_tail);
>>> +	if (new_order) {
>>> +		prep_compound_page(page_tail, new_order);
>>> +		prep_transhuge_page(page_tail);
>>> +	}
>>
>> Many thanks for your series. It looks really good. One question:
>> IIUC, It seems there has assumption that LRU compound_pages should
>> be PageTransHuge. So PageTransHuge just checks PageHead:
>>
>> static inline int PageTransHuge(struct page *page)
>> {
>> 	VM_BUG_ON_PAGE(PageTail(page), page);
>> 	return PageHead(page);
>> }
>>
>> So LRU pages with any order( > 0) will might be wrongly treated as THP which
>> has order = HPAGE_PMD_ORDER. We should ensure thp_nr_pages is used instead of
>> hard coded HPAGE_PMD_ORDER.
>>
>> Looks at the below code snippet:
>> mm/mempolicy.c:
>> static struct page *new_page(struct page *page, unsigned long start)
>> {
>> ...
>> 	} else if (PageTransHuge(page)) {
>> 		struct page *thp;
>>
>> 		thp = alloc_hugepage_vma(GFP_TRANSHUGE, vma, address,
>> 					 HPAGE_PMD_ORDER);
>> 					 ^^^^^^^^^^^^^^^^
>> 		if (!thp)
>> 			return NULL;
>> 		prep_transhuge_page(thp);
>> 		return thp;
>> 	}
>> ...
>> }
>>
>> HPAGE_PMD_ORDER is used instead of thp_nr_pages. So the lower order pages might be
>> used as if its order is HPAGE_PMD_ORDER. All of such usage might need to be fixed.
>> Or am I miss something ?
>>
>> Thanks again for your work. :)
> 
> THP will still only have HPAGE_PMD_ORDER and will not be split into any order
> other than 0. This series only allows to split huge page cache folio (added by Matthew)
> into any lower order. I have an explicit VM_BUG_ON() to ensure new_order
> is only 0 when non page cache page is the input. Since there is still non-trivial
> amount of work to add any order THP support in the kernel. IIRC, Yu Zhao (cc’d) was
> planning to work on that.
> 

Many thanks for clarifying. I'm sorry but I haven't followed Matthew's patches. I am
wondering could huge page cache folio be treated as THP ? If so, how to ensure the
correctness of huge page cache ?

Thanks again!

> Thanks for checking the patches.

BTW: I like your patches. It's really interesting. :)

> 

Re: [RFC PATCH 3/5] mm: thp: split huge page to any lower order pages.

[Miaohe Lin]

On 2022/3/22 22:30, Zi Yan wrote:
> On 21 Mar 2022, at 23:21, Miaohe Lin wrote:
> 
>> On 2022/3/21 22:21, Zi Yan wrote:
>>> From: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>>>
>>> To split a THP to any lower order pages, we need to reform THPs on
>>> subpages at given order and add page refcount based on the new page
>>> order. Also we need to reinitialize page_deferred_list after removing
>>> the page from the split_queue, otherwise a subsequent split will see
>>> list corruption when checking the page_deferred_list again.
>>>
>>> It has many uses, like minimizing the number of pages after
>>> truncating a pagecache THP. For anonymous THPs, we can only split them
>>> to order-0 like before until we add support for any size anonymous THPs.
>>>
>>> Signed-off-by: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>>> ---
>>>  include/linux/huge_mm.h |   8 +++
>>>  mm/huge_memory.c        | 111 ++++++++++++++++++++++++++++++----------
>>>  2 files changed, 91 insertions(+), 28 deletions(-)
>>>
>>> diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
>>> index 2999190adc22..c7153cd7e9e4 100644
>>> --- a/include/linux/huge_mm.h
>>> +++ b/include/linux/huge_mm.h
>>> @@ -186,6 +186,8 @@ void free_transhuge_page(struct page *page);
>>>
>>>  bool can_split_folio(struct folio *folio, int *pextra_pins);
>>>  int split_huge_page_to_list(struct page *page, struct list_head *list);
>>> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>>> +		unsigned int new_order);
>>>  static inline int split_huge_page(struct page *page)
>>>  {
>>>  	return split_huge_page_to_list(page, NULL);
>>> @@ -355,6 +357,12 @@ split_huge_page_to_list(struct page *page, struct list_head *list)
>>>  {
>>>  	return 0;
>>>  }
>>> +static inline int
>>> +split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>>> +		unsigned int new_order)
>>> +{
>>> +	return 0;
>>> +}
>>>  static inline int split_huge_page(struct page *page)
>>>  {
>>>  	return 0;
>>> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
>>> index fcfa46af6c4c..3617aa3ad0b1 100644
>>> --- a/mm/huge_memory.c
>>> +++ b/mm/huge_memory.c
>>> @@ -2236,11 +2236,13 @@ void vma_adjust_trans_huge(struct vm_area_struct *vma,
>>>  static void unmap_page(struct page *page)
>>>  {
>>>  	struct folio *folio = page_folio(page);
>>> -	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SPLIT_HUGE_PMD |
>>> -		TTU_SYNC;
>>> +	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SYNC;
>>>
>>>  	VM_BUG_ON_PAGE(!PageHead(page), page);
>>>
>>> +	if (folio_order(folio) >= HPAGE_PMD_ORDER)
>>> +		ttu_flags |= TTU_SPLIT_HUGE_PMD;
>>> +
>>>  	/*
>>>  	 * Anon pages need migration entries to preserve them, but file
>>>  	 * pages can simply be left unmapped, then faulted back on demand.
>>> @@ -2254,9 +2256,9 @@ static void unmap_page(struct page *page)
>>>  	VM_WARN_ON_ONCE_PAGE(page_mapped(page), page);
>>>  }
>>>
>>> -static void remap_page(struct folio *folio, unsigned long nr)
>>> +static void remap_page(struct folio *folio, unsigned short nr)
>>>  {
>>> -	int i = 0;
>>> +	unsigned int i;
>>>
>>>  	/* If unmap_page() uses try_to_migrate() on file, remove this check */
>>>  	if (!folio_test_anon(folio))
>>> @@ -2274,7 +2276,6 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>>>  		struct lruvec *lruvec, struct list_head *list)
>>>  {
>>>  	VM_BUG_ON_PAGE(!PageHead(head), head);
>>> -	VM_BUG_ON_PAGE(PageCompound(tail), head);
>>>  	VM_BUG_ON_PAGE(PageLRU(tail), head);
>>>  	lockdep_assert_held(&lruvec->lru_lock);
>>>
>>> @@ -2295,9 +2296,10 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>>>  }
>>>
>>>  static void __split_huge_page_tail(struct page *head, int tail,
>>> -		struct lruvec *lruvec, struct list_head *list)
>>> +		struct lruvec *lruvec, struct list_head *list, unsigned int new_order)
>>>  {
>>>  	struct page *page_tail = head + tail;
>>> +	unsigned long compound_head_flag = new_order ? (1L << PG_head) : 0;
>>>
>>>  	VM_BUG_ON_PAGE(atomic_read(&page_tail->_mapcount) != -1, page_tail);
>>>
>>> @@ -2321,6 +2323,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>>  #ifdef CONFIG_64BIT
>>>  			 (1L << PG_arch_2) |
>>>  #endif
>>> +			 compound_head_flag |
>>>  			 (1L << PG_dirty)));
>>>
>>>  	/* ->mapping in first tail page is compound_mapcount */
>>> @@ -2329,7 +2332,10 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>>  	page_tail->mapping = head->mapping;
>>>  	page_tail->index = head->index + tail;
>>>
>>> -	/* Page flags must be visible before we make the page non-compound. */
>>> +	/*
>>> +	 * Page flags must be visible before we make the page non-compound or
>>> +	 * a compound page in new_order.
>>> +	 */
>>>  	smp_wmb();
>>>
>>>  	/*
>>> @@ -2339,10 +2345,15 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>>  	 * which needs correct compound_head().
>>>  	 */
>>>  	clear_compound_head(page_tail);
>>> +	if (new_order) {
>>> +		prep_compound_page(page_tail, new_order);
>>> +		prep_transhuge_page(page_tail);
>>> +	}
>>
>> Many thanks for your series. It looks really good. One question:
>> IIUC, It seems there has assumption that LRU compound_pages should
>> be PageTransHuge. So PageTransHuge just checks PageHead:
>>
>> static inline int PageTransHuge(struct page *page)
>> {
>> 	VM_BUG_ON_PAGE(PageTail(page), page);
>> 	return PageHead(page);
>> }
>>
>> So LRU pages with any order( > 0) will might be wrongly treated as THP which
>> has order = HPAGE_PMD_ORDER. We should ensure thp_nr_pages is used instead of
>> hard coded HPAGE_PMD_ORDER.
>>
>> Looks at the below code snippet:
>> mm/mempolicy.c:
>> static struct page *new_page(struct page *page, unsigned long start)
>> {
>> ...
>> 	} else if (PageTransHuge(page)) {
>> 		struct page *thp;
>>
>> 		thp = alloc_hugepage_vma(GFP_TRANSHUGE, vma, address,
>> 					 HPAGE_PMD_ORDER);
>> 					 ^^^^^^^^^^^^^^^^
>> 		if (!thp)
>> 			return NULL;
>> 		prep_transhuge_page(thp);
>> 		return thp;
>> 	}
>> ...
>> }
>>
>> HPAGE_PMD_ORDER is used instead of thp_nr_pages. So the lower order pages might be
>> used as if its order is HPAGE_PMD_ORDER. All of such usage might need to be fixed.
>> Or am I miss something ?
>>
>> Thanks again for your work. :)
> 
> THP will still only have HPAGE_PMD_ORDER and will not be split into any order
> other than 0. This series only allows to split huge page cache folio (added by Matthew)
> into any lower order. I have an explicit VM_BUG_ON() to ensure new_order
> is only 0 when non page cache page is the input. Since there is still non-trivial
> amount of work to add any order THP support in the kernel. IIRC, Yu Zhao (cc’d) was
> planning to work on that.
> 

Many thanks for clarifying. I'm sorry but I haven't followed Matthew's patches. I am
wondering could huge page cache folio be treated as THP ? If so, how to ensure the
correctness of huge page cache ?

Thanks again!

> Thanks for checking the patches.

BTW: I like your patches. It's really interesting. :)

> 

Re: [RFC PATCH 3/5] mm: thp: split huge page to any lower order pages.

[Zi Yan]

[-- Attachment #1: Type: text/plain, Size: 7445 bytes --]

On 22 Mar 2022, at 22:31, Miaohe Lin wrote:

> On 2022/3/22 22:30, Zi Yan wrote:
>> On 21 Mar 2022, at 23:21, Miaohe Lin wrote:
>>
>>> On 2022/3/21 22:21, Zi Yan wrote:
>>>> From: Zi Yan <ziy@nvidia.com>
>>>>
>>>> To split a THP to any lower order pages, we need to reform THPs on
>>>> subpages at given order and add page refcount based on the new page
>>>> order. Also we need to reinitialize page_deferred_list after removing
>>>> the page from the split_queue, otherwise a subsequent split will see
>>>> list corruption when checking the page_deferred_list again.
>>>>
>>>> It has many uses, like minimizing the number of pages after
>>>> truncating a pagecache THP. For anonymous THPs, we can only split them
>>>> to order-0 like before until we add support for any size anonymous THPs.
>>>>
>>>> Signed-off-by: Zi Yan <ziy@nvidia.com>
>>>> ---
>>>>  include/linux/huge_mm.h |   8 +++
>>>>  mm/huge_memory.c        | 111 ++++++++++++++++++++++++++++++----------
>>>>  2 files changed, 91 insertions(+), 28 deletions(-)
>>>>
>>>> diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
>>>> index 2999190adc22..c7153cd7e9e4 100644
>>>> --- a/include/linux/huge_mm.h
>>>> +++ b/include/linux/huge_mm.h
>>>> @@ -186,6 +186,8 @@ void free_transhuge_page(struct page *page);
>>>>
>>>>  bool can_split_folio(struct folio *folio, int *pextra_pins);
>>>>  int split_huge_page_to_list(struct page *page, struct list_head *list);
>>>> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>>>> +		unsigned int new_order);
>>>>  static inline int split_huge_page(struct page *page)
>>>>  {
>>>>  	return split_huge_page_to_list(page, NULL);
>>>> @@ -355,6 +357,12 @@ split_huge_page_to_list(struct page *page, struct list_head *list)
>>>>  {
>>>>  	return 0;
>>>>  }
>>>> +static inline int
>>>> +split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>>>> +		unsigned int new_order)
>>>> +{
>>>> +	return 0;
>>>> +}
>>>>  static inline int split_huge_page(struct page *page)
>>>>  {
>>>>  	return 0;
>>>> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
>>>> index fcfa46af6c4c..3617aa3ad0b1 100644
>>>> --- a/mm/huge_memory.c
>>>> +++ b/mm/huge_memory.c
>>>> @@ -2236,11 +2236,13 @@ void vma_adjust_trans_huge(struct vm_area_struct *vma,
>>>>  static void unmap_page(struct page *page)
>>>>  {
>>>>  	struct folio *folio = page_folio(page);
>>>> -	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SPLIT_HUGE_PMD |
>>>> -		TTU_SYNC;
>>>> +	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SYNC;
>>>>
>>>>  	VM_BUG_ON_PAGE(!PageHead(page), page);
>>>>
>>>> +	if (folio_order(folio) >= HPAGE_PMD_ORDER)
>>>> +		ttu_flags |= TTU_SPLIT_HUGE_PMD;
>>>> +
>>>>  	/*
>>>>  	 * Anon pages need migration entries to preserve them, but file
>>>>  	 * pages can simply be left unmapped, then faulted back on demand.
>>>> @@ -2254,9 +2256,9 @@ static void unmap_page(struct page *page)
>>>>  	VM_WARN_ON_ONCE_PAGE(page_mapped(page), page);
>>>>  }
>>>>
>>>> -static void remap_page(struct folio *folio, unsigned long nr)
>>>> +static void remap_page(struct folio *folio, unsigned short nr)
>>>>  {
>>>> -	int i = 0;
>>>> +	unsigned int i;
>>>>
>>>>  	/* If unmap_page() uses try_to_migrate() on file, remove this check */
>>>>  	if (!folio_test_anon(folio))
>>>> @@ -2274,7 +2276,6 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>>>>  		struct lruvec *lruvec, struct list_head *list)
>>>>  {
>>>>  	VM_BUG_ON_PAGE(!PageHead(head), head);
>>>> -	VM_BUG_ON_PAGE(PageCompound(tail), head);
>>>>  	VM_BUG_ON_PAGE(PageLRU(tail), head);
>>>>  	lockdep_assert_held(&lruvec->lru_lock);
>>>>
>>>> @@ -2295,9 +2296,10 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>>>>  }
>>>>
>>>>  static void __split_huge_page_tail(struct page *head, int tail,
>>>> -		struct lruvec *lruvec, struct list_head *list)
>>>> +		struct lruvec *lruvec, struct list_head *list, unsigned int new_order)
>>>>  {
>>>>  	struct page *page_tail = head + tail;
>>>> +	unsigned long compound_head_flag = new_order ? (1L << PG_head) : 0;
>>>>
>>>>  	VM_BUG_ON_PAGE(atomic_read(&page_tail->_mapcount) != -1, page_tail);
>>>>
>>>> @@ -2321,6 +2323,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>>>  #ifdef CONFIG_64BIT
>>>>  			 (1L << PG_arch_2) |
>>>>  #endif
>>>> +			 compound_head_flag |
>>>>  			 (1L << PG_dirty)));
>>>>
>>>>  	/* ->mapping in first tail page is compound_mapcount */
>>>> @@ -2329,7 +2332,10 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>>>  	page_tail->mapping = head->mapping;
>>>>  	page_tail->index = head->index + tail;
>>>>
>>>> -	/* Page flags must be visible before we make the page non-compound. */
>>>> +	/*
>>>> +	 * Page flags must be visible before we make the page non-compound or
>>>> +	 * a compound page in new_order.
>>>> +	 */
>>>>  	smp_wmb();
>>>>
>>>>  	/*
>>>> @@ -2339,10 +2345,15 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>>>  	 * which needs correct compound_head().
>>>>  	 */
>>>>  	clear_compound_head(page_tail);
>>>> +	if (new_order) {
>>>> +		prep_compound_page(page_tail, new_order);
>>>> +		prep_transhuge_page(page_tail);
>>>> +	}
>>>
>>> Many thanks for your series. It looks really good. One question:
>>> IIUC, It seems there has assumption that LRU compound_pages should
>>> be PageTransHuge. So PageTransHuge just checks PageHead:
>>>
>>> static inline int PageTransHuge(struct page *page)
>>> {
>>> 	VM_BUG_ON_PAGE(PageTail(page), page);
>>> 	return PageHead(page);
>>> }
>>>
>>> So LRU pages with any order( > 0) will might be wrongly treated as THP which
>>> has order = HPAGE_PMD_ORDER. We should ensure thp_nr_pages is used instead of
>>> hard coded HPAGE_PMD_ORDER.
>>>
>>> Looks at the below code snippet:
>>> mm/mempolicy.c:
>>> static struct page *new_page(struct page *page, unsigned long start)
>>> {
>>> ...
>>> 	} else if (PageTransHuge(page)) {
>>> 		struct page *thp;
>>>
>>> 		thp = alloc_hugepage_vma(GFP_TRANSHUGE, vma, address,
>>> 					 HPAGE_PMD_ORDER);
>>> 					 ^^^^^^^^^^^^^^^^
>>> 		if (!thp)
>>> 			return NULL;
>>> 		prep_transhuge_page(thp);
>>> 		return thp;
>>> 	}
>>> ...
>>> }
>>>
>>> HPAGE_PMD_ORDER is used instead of thp_nr_pages. So the lower order pages might be
>>> used as if its order is HPAGE_PMD_ORDER. All of such usage might need to be fixed.
>>> Or am I miss something ?
>>>
>>> Thanks again for your work. :)
>>
>> THP will still only have HPAGE_PMD_ORDER and will not be split into any order
>> other than 0. This series only allows to split huge page cache folio (added by Matthew)
>> into any lower order. I have an explicit VM_BUG_ON() to ensure new_order
>> is only 0 when non page cache page is the input. Since there is still non-trivial
>> amount of work to add any order THP support in the kernel. IIRC, Yu Zhao (cc’d) was
>> planning to work on that.
>>
>
> Many thanks for clarifying. I'm sorry but I haven't followed Matthew's patches. I am
> wondering could huge page cache folio be treated as THP ? If so, how to ensure the
> correctness of huge page cache ?

You are right. All these HPAGE_PMD_ORDRE locations should be replaced by thp_nr_pages().
I will look into it.

Thanks a lot.

--
Best Regards,
Yan, Zi

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 854 bytes --]

Re: [RFC PATCH 3/5] mm: thp: split huge page to any lower order pages.

[Miaohe Lin]

On 2022/3/24 6:10, Zi Yan wrote:
> On 22 Mar 2022, at 22:31, Miaohe Lin wrote:
> 
>> On 2022/3/22 22:30, Zi Yan wrote:
>>> On 21 Mar 2022, at 23:21, Miaohe Lin wrote:
>>>
>>>> On 2022/3/21 22:21, Zi Yan wrote:
>>>>> From: Zi Yan <ziy@nvidia.com>
>>>>>
>>>>> To split a THP to any lower order pages, we need to reform THPs on
>>>>> subpages at given order and add page refcount based on the new page
>>>>> order. Also we need to reinitialize page_deferred_list after removing
>>>>> the page from the split_queue, otherwise a subsequent split will see
>>>>> list corruption when checking the page_deferred_list again.
>>>>>
>>>>> It has many uses, like minimizing the number of pages after
>>>>> truncating a pagecache THP. For anonymous THPs, we can only split them
>>>>> to order-0 like before until we add support for any size anonymous THPs.
>>>>>
>>>>> Signed-off-by: Zi Yan <ziy@nvidia.com>
>>>>> ---
>>>>>  include/linux/huge_mm.h |   8 +++
>>>>>  mm/huge_memory.c        | 111 ++++++++++++++++++++++++++++++----------
>>>>>  2 files changed, 91 insertions(+), 28 deletions(-)
>>>>>
>>>>> diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
>>>>> index 2999190adc22..c7153cd7e9e4 100644
>>>>> --- a/include/linux/huge_mm.h
>>>>> +++ b/include/linux/huge_mm.h
>>>>> @@ -186,6 +186,8 @@ void free_transhuge_page(struct page *page);
>>>>>
>>>>>  bool can_split_folio(struct folio *folio, int *pextra_pins);
>>>>>  int split_huge_page_to_list(struct page *page, struct list_head *list);
>>>>> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>>>>> +		unsigned int new_order);
>>>>>  static inline int split_huge_page(struct page *page)
>>>>>  {
>>>>>  	return split_huge_page_to_list(page, NULL);
>>>>> @@ -355,6 +357,12 @@ split_huge_page_to_list(struct page *page, struct list_head *list)
>>>>>  {
>>>>>  	return 0;
>>>>>  }
>>>>> +static inline int
>>>>> +split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>>>>> +		unsigned int new_order)
>>>>> +{
>>>>> +	return 0;
>>>>> +}
>>>>>  static inline int split_huge_page(struct page *page)
>>>>>  {
>>>>>  	return 0;
>>>>> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
>>>>> index fcfa46af6c4c..3617aa3ad0b1 100644
>>>>> --- a/mm/huge_memory.c
>>>>> +++ b/mm/huge_memory.c
>>>>> @@ -2236,11 +2236,13 @@ void vma_adjust_trans_huge(struct vm_area_struct *vma,
>>>>>  static void unmap_page(struct page *page)
>>>>>  {
>>>>>  	struct folio *folio = page_folio(page);
>>>>> -	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SPLIT_HUGE_PMD |
>>>>> -		TTU_SYNC;
>>>>> +	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SYNC;
>>>>>
>>>>>  	VM_BUG_ON_PAGE(!PageHead(page), page);
>>>>>
>>>>> +	if (folio_order(folio) >= HPAGE_PMD_ORDER)
>>>>> +		ttu_flags |= TTU_SPLIT_HUGE_PMD;
>>>>> +
>>>>>  	/*
>>>>>  	 * Anon pages need migration entries to preserve them, but file
>>>>>  	 * pages can simply be left unmapped, then faulted back on demand.
>>>>> @@ -2254,9 +2256,9 @@ static void unmap_page(struct page *page)
>>>>>  	VM_WARN_ON_ONCE_PAGE(page_mapped(page), page);
>>>>>  }
>>>>>
>>>>> -static void remap_page(struct folio *folio, unsigned long nr)
>>>>> +static void remap_page(struct folio *folio, unsigned short nr)
>>>>>  {
>>>>> -	int i = 0;
>>>>> +	unsigned int i;
>>>>>
>>>>>  	/* If unmap_page() uses try_to_migrate() on file, remove this check */
>>>>>  	if (!folio_test_anon(folio))
>>>>> @@ -2274,7 +2276,6 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>>>>>  		struct lruvec *lruvec, struct list_head *list)
>>>>>  {
>>>>>  	VM_BUG_ON_PAGE(!PageHead(head), head);
>>>>> -	VM_BUG_ON_PAGE(PageCompound(tail), head);
>>>>>  	VM_BUG_ON_PAGE(PageLRU(tail), head);
>>>>>  	lockdep_assert_held(&lruvec->lru_lock);
>>>>>
>>>>> @@ -2295,9 +2296,10 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>>>>>  }
>>>>>
>>>>>  static void __split_huge_page_tail(struct page *head, int tail,
>>>>> -		struct lruvec *lruvec, struct list_head *list)
>>>>> +		struct lruvec *lruvec, struct list_head *list, unsigned int new_order)
>>>>>  {
>>>>>  	struct page *page_tail = head + tail;
>>>>> +	unsigned long compound_head_flag = new_order ? (1L << PG_head) : 0;
>>>>>
>>>>>  	VM_BUG_ON_PAGE(atomic_read(&page_tail->_mapcount) != -1, page_tail);
>>>>>
>>>>> @@ -2321,6 +2323,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>>>>  #ifdef CONFIG_64BIT
>>>>>  			 (1L << PG_arch_2) |
>>>>>  #endif
>>>>> +			 compound_head_flag |
>>>>>  			 (1L << PG_dirty)));
>>>>>
>>>>>  	/* ->mapping in first tail page is compound_mapcount */
>>>>> @@ -2329,7 +2332,10 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>>>>  	page_tail->mapping = head->mapping;
>>>>>  	page_tail->index = head->index + tail;
>>>>>
>>>>> -	/* Page flags must be visible before we make the page non-compound. */
>>>>> +	/*
>>>>> +	 * Page flags must be visible before we make the page non-compound or
>>>>> +	 * a compound page in new_order.
>>>>> +	 */
>>>>>  	smp_wmb();
>>>>>
>>>>>  	/*
>>>>> @@ -2339,10 +2345,15 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>>>>  	 * which needs correct compound_head().
>>>>>  	 */
>>>>>  	clear_compound_head(page_tail);
>>>>> +	if (new_order) {
>>>>> +		prep_compound_page(page_tail, new_order);
>>>>> +		prep_transhuge_page(page_tail);
>>>>> +	}
>>>>
>>>> Many thanks for your series. It looks really good. One question:
>>>> IIUC, It seems there has assumption that LRU compound_pages should
>>>> be PageTransHuge. So PageTransHuge just checks PageHead:
>>>>
>>>> static inline int PageTransHuge(struct page *page)
>>>> {
>>>> 	VM_BUG_ON_PAGE(PageTail(page), page);
>>>> 	return PageHead(page);
>>>> }
>>>>
>>>> So LRU pages with any order( > 0) will might be wrongly treated as THP which
>>>> has order = HPAGE_PMD_ORDER. We should ensure thp_nr_pages is used instead of
>>>> hard coded HPAGE_PMD_ORDER.
>>>>
>>>> Looks at the below code snippet:
>>>> mm/mempolicy.c:
>>>> static struct page *new_page(struct page *page, unsigned long start)
>>>> {
>>>> ...
>>>> 	} else if (PageTransHuge(page)) {
>>>> 		struct page *thp;
>>>>
>>>> 		thp = alloc_hugepage_vma(GFP_TRANSHUGE, vma, address,
>>>> 					 HPAGE_PMD_ORDER);
>>>> 					 ^^^^^^^^^^^^^^^^
>>>> 		if (!thp)
>>>> 			return NULL;
>>>> 		prep_transhuge_page(thp);
>>>> 		return thp;
>>>> 	}
>>>> ...
>>>> }
>>>>
>>>> HPAGE_PMD_ORDER is used instead of thp_nr_pages. So the lower order pages might be
>>>> used as if its order is HPAGE_PMD_ORDER. All of such usage might need to be fixed.
>>>> Or am I miss something ?
>>>>
>>>> Thanks again for your work. :)
>>>
>>> THP will still only have HPAGE_PMD_ORDER and will not be split into any order
>>> other than 0. This series only allows to split huge page cache folio (added by Matthew)
>>> into any lower order. I have an explicit VM_BUG_ON() to ensure new_order
>>> is only 0 when non page cache page is the input. Since there is still non-trivial
>>> amount of work to add any order THP support in the kernel. IIRC, Yu Zhao (cc’d) was
>>> planning to work on that.
>>>
>>
>> Many thanks for clarifying. I'm sorry but I haven't followed Matthew's patches. I am
>> wondering could huge page cache folio be treated as THP ? If so, how to ensure the
>> correctness of huge page cache ?
> 
> You are right. All these HPAGE_PMD_ORDRE locations should be replaced by thp_nr_pages().
> I will look into it.
> 

Many thanks for doing this. :)

> Thanks a lot.
> 
> --
> Best Regards,
> Yan, Zi
> 

Re: [RFC PATCH 3/5] mm: thp: split huge page to any lower order pages.

[Miaohe Lin]

On 2022/3/24 6:10, Zi Yan wrote:
> On 22 Mar 2022, at 22:31, Miaohe Lin wrote:
> 
>> On 2022/3/22 22:30, Zi Yan wrote:
>>> On 21 Mar 2022, at 23:21, Miaohe Lin wrote:
>>>
>>>> On 2022/3/21 22:21, Zi Yan wrote:
>>>>> From: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>>>>>
>>>>> To split a THP to any lower order pages, we need to reform THPs on
>>>>> subpages at given order and add page refcount based on the new page
>>>>> order. Also we need to reinitialize page_deferred_list after removing
>>>>> the page from the split_queue, otherwise a subsequent split will see
>>>>> list corruption when checking the page_deferred_list again.
>>>>>
>>>>> It has many uses, like minimizing the number of pages after
>>>>> truncating a pagecache THP. For anonymous THPs, we can only split them
>>>>> to order-0 like before until we add support for any size anonymous THPs.
>>>>>
>>>>> Signed-off-by: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>>>>> ---
>>>>>  include/linux/huge_mm.h |   8 +++
>>>>>  mm/huge_memory.c        | 111 ++++++++++++++++++++++++++++++----------
>>>>>  2 files changed, 91 insertions(+), 28 deletions(-)
>>>>>
>>>>> diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
>>>>> index 2999190adc22..c7153cd7e9e4 100644
>>>>> --- a/include/linux/huge_mm.h
>>>>> +++ b/include/linux/huge_mm.h
>>>>> @@ -186,6 +186,8 @@ void free_transhuge_page(struct page *page);
>>>>>
>>>>>  bool can_split_folio(struct folio *folio, int *pextra_pins);
>>>>>  int split_huge_page_to_list(struct page *page, struct list_head *list);
>>>>> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>>>>> +		unsigned int new_order);
>>>>>  static inline int split_huge_page(struct page *page)
>>>>>  {
>>>>>  	return split_huge_page_to_list(page, NULL);
>>>>> @@ -355,6 +357,12 @@ split_huge_page_to_list(struct page *page, struct list_head *list)
>>>>>  {
>>>>>  	return 0;
>>>>>  }
>>>>> +static inline int
>>>>> +split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
>>>>> +		unsigned int new_order)
>>>>> +{
>>>>> +	return 0;
>>>>> +}
>>>>>  static inline int split_huge_page(struct page *page)
>>>>>  {
>>>>>  	return 0;
>>>>> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
>>>>> index fcfa46af6c4c..3617aa3ad0b1 100644
>>>>> --- a/mm/huge_memory.c
>>>>> +++ b/mm/huge_memory.c
>>>>> @@ -2236,11 +2236,13 @@ void vma_adjust_trans_huge(struct vm_area_struct *vma,
>>>>>  static void unmap_page(struct page *page)
>>>>>  {
>>>>>  	struct folio *folio = page_folio(page);
>>>>> -	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SPLIT_HUGE_PMD |
>>>>> -		TTU_SYNC;
>>>>> +	enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SYNC;
>>>>>
>>>>>  	VM_BUG_ON_PAGE(!PageHead(page), page);
>>>>>
>>>>> +	if (folio_order(folio) >= HPAGE_PMD_ORDER)
>>>>> +		ttu_flags |= TTU_SPLIT_HUGE_PMD;
>>>>> +
>>>>>  	/*
>>>>>  	 * Anon pages need migration entries to preserve them, but file
>>>>>  	 * pages can simply be left unmapped, then faulted back on demand.
>>>>> @@ -2254,9 +2256,9 @@ static void unmap_page(struct page *page)
>>>>>  	VM_WARN_ON_ONCE_PAGE(page_mapped(page), page);
>>>>>  }
>>>>>
>>>>> -static void remap_page(struct folio *folio, unsigned long nr)
>>>>> +static void remap_page(struct folio *folio, unsigned short nr)
>>>>>  {
>>>>> -	int i = 0;
>>>>> +	unsigned int i;
>>>>>
>>>>>  	/* If unmap_page() uses try_to_migrate() on file, remove this check */
>>>>>  	if (!folio_test_anon(folio))
>>>>> @@ -2274,7 +2276,6 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>>>>>  		struct lruvec *lruvec, struct list_head *list)
>>>>>  {
>>>>>  	VM_BUG_ON_PAGE(!PageHead(head), head);
>>>>> -	VM_BUG_ON_PAGE(PageCompound(tail), head);
>>>>>  	VM_BUG_ON_PAGE(PageLRU(tail), head);
>>>>>  	lockdep_assert_held(&lruvec->lru_lock);
>>>>>
>>>>> @@ -2295,9 +2296,10 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>>>>>  }
>>>>>
>>>>>  static void __split_huge_page_tail(struct page *head, int tail,
>>>>> -		struct lruvec *lruvec, struct list_head *list)
>>>>> +		struct lruvec *lruvec, struct list_head *list, unsigned int new_order)
>>>>>  {
>>>>>  	struct page *page_tail = head + tail;
>>>>> +	unsigned long compound_head_flag = new_order ? (1L << PG_head) : 0;
>>>>>
>>>>>  	VM_BUG_ON_PAGE(atomic_read(&page_tail->_mapcount) != -1, page_tail);
>>>>>
>>>>> @@ -2321,6 +2323,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>>>>  #ifdef CONFIG_64BIT
>>>>>  			 (1L << PG_arch_2) |
>>>>>  #endif
>>>>> +			 compound_head_flag |
>>>>>  			 (1L << PG_dirty)));
>>>>>
>>>>>  	/* ->mapping in first tail page is compound_mapcount */
>>>>> @@ -2329,7 +2332,10 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>>>>  	page_tail->mapping = head->mapping;
>>>>>  	page_tail->index = head->index + tail;
>>>>>
>>>>> -	/* Page flags must be visible before we make the page non-compound. */
>>>>> +	/*
>>>>> +	 * Page flags must be visible before we make the page non-compound or
>>>>> +	 * a compound page in new_order.
>>>>> +	 */
>>>>>  	smp_wmb();
>>>>>
>>>>>  	/*
>>>>> @@ -2339,10 +2345,15 @@ static void __split_huge_page_tail(struct page *head, int tail,
>>>>>  	 * which needs correct compound_head().
>>>>>  	 */
>>>>>  	clear_compound_head(page_tail);
>>>>> +	if (new_order) {
>>>>> +		prep_compound_page(page_tail, new_order);
>>>>> +		prep_transhuge_page(page_tail);
>>>>> +	}
>>>>
>>>> Many thanks for your series. It looks really good. One question:
>>>> IIUC, It seems there has assumption that LRU compound_pages should
>>>> be PageTransHuge. So PageTransHuge just checks PageHead:
>>>>
>>>> static inline int PageTransHuge(struct page *page)
>>>> {
>>>> 	VM_BUG_ON_PAGE(PageTail(page), page);
>>>> 	return PageHead(page);
>>>> }
>>>>
>>>> So LRU pages with any order( > 0) will might be wrongly treated as THP which
>>>> has order = HPAGE_PMD_ORDER. We should ensure thp_nr_pages is used instead of
>>>> hard coded HPAGE_PMD_ORDER.
>>>>
>>>> Looks at the below code snippet:
>>>> mm/mempolicy.c:
>>>> static struct page *new_page(struct page *page, unsigned long start)
>>>> {
>>>> ...
>>>> 	} else if (PageTransHuge(page)) {
>>>> 		struct page *thp;
>>>>
>>>> 		thp = alloc_hugepage_vma(GFP_TRANSHUGE, vma, address,
>>>> 					 HPAGE_PMD_ORDER);
>>>> 					 ^^^^^^^^^^^^^^^^
>>>> 		if (!thp)
>>>> 			return NULL;
>>>> 		prep_transhuge_page(thp);
>>>> 		return thp;
>>>> 	}
>>>> ...
>>>> }
>>>>
>>>> HPAGE_PMD_ORDER is used instead of thp_nr_pages. So the lower order pages might be
>>>> used as if its order is HPAGE_PMD_ORDER. All of such usage might need to be fixed.
>>>> Or am I miss something ?
>>>>
>>>> Thanks again for your work. :)
>>>
>>> THP will still only have HPAGE_PMD_ORDER and will not be split into any order
>>> other than 0. This series only allows to split huge page cache folio (added by Matthew)
>>> into any lower order. I have an explicit VM_BUG_ON() to ensure new_order
>>> is only 0 when non page cache page is the input. Since there is still non-trivial
>>> amount of work to add any order THP support in the kernel. IIRC, Yu Zhao (cc’d) was
>>> planning to work on that.
>>>
>>
>> Many thanks for clarifying. I'm sorry but I haven't followed Matthew's patches. I am
>> wondering could huge page cache folio be treated as THP ? If so, how to ensure the
>> correctness of huge page cache ?
> 
> You are right. All these HPAGE_PMD_ORDRE locations should be replaced by thp_nr_pages().
> I will look into it.
> 

Many thanks for doing this. :)

> Thanks a lot.
> 
> --
> Best Regards,
> Yan, Zi
> 

Re: [RFC PATCH 3/5] mm: thp: split huge page to any lower order pages.

[Yang Shi]

On Mon, Mar 21, 2022 at 7:21 AM Zi Yan <zi.yan@sent.com> wrote:
>
> From: Zi Yan <ziy@nvidia.com>
>
> To split a THP to any lower order pages, we need to reform THPs on
> subpages at given order and add page refcount based on the new page
> order. Also we need to reinitialize page_deferred_list after removing
> the page from the split_queue, otherwise a subsequent split will see
> list corruption when checking the page_deferred_list again.
>
> It has many uses, like minimizing the number of pages after
> truncating a pagecache THP. For anonymous THPs, we can only split them
> to order-0 like before until we add support for any size anonymous THPs.

Yes, I think it is good for now. The arbitrary sized anonymous huge
page may be more useful with continuous PTEs supported by some
architectures otherwise it doesn't sound that intriguing given its
complexity.

>
> Signed-off-by: Zi Yan <ziy@nvidia.com>
> ---
>  include/linux/huge_mm.h |   8 +++
>  mm/huge_memory.c        | 111 ++++++++++++++++++++++++++++++----------
>  2 files changed, 91 insertions(+), 28 deletions(-)
>
> diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
> index 2999190adc22..c7153cd7e9e4 100644
> --- a/include/linux/huge_mm.h
> +++ b/include/linux/huge_mm.h
> @@ -186,6 +186,8 @@ void free_transhuge_page(struct page *page);
>
>  bool can_split_folio(struct folio *folio, int *pextra_pins);
>  int split_huge_page_to_list(struct page *page, struct list_head *list);
> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
> +               unsigned int new_order);
>  static inline int split_huge_page(struct page *page)
>  {
>         return split_huge_page_to_list(page, NULL);
> @@ -355,6 +357,12 @@ split_huge_page_to_list(struct page *page, struct list_head *list)
>  {
>         return 0;
>  }
> +static inline int
> +split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
> +               unsigned int new_order)
> +{
> +       return 0;
> +}
>  static inline int split_huge_page(struct page *page)
>  {
>         return 0;
> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> index fcfa46af6c4c..3617aa3ad0b1 100644
> --- a/mm/huge_memory.c
> +++ b/mm/huge_memory.c
> @@ -2236,11 +2236,13 @@ void vma_adjust_trans_huge(struct vm_area_struct *vma,
>  static void unmap_page(struct page *page)
>  {
>         struct folio *folio = page_folio(page);
> -       enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SPLIT_HUGE_PMD |
> -               TTU_SYNC;
> +       enum ttu_flags ttu_flags = TTU_RMAP_LOCKED | TTU_SYNC;
>
>         VM_BUG_ON_PAGE(!PageHead(page), page);
>
> +       if (folio_order(folio) >= HPAGE_PMD_ORDER)
> +               ttu_flags |= TTU_SPLIT_HUGE_PMD;
> +
>         /*
>          * Anon pages need migration entries to preserve them, but file
>          * pages can simply be left unmapped, then faulted back on demand.
> @@ -2254,9 +2256,9 @@ static void unmap_page(struct page *page)
>         VM_WARN_ON_ONCE_PAGE(page_mapped(page), page);
>  }
>
> -static void remap_page(struct folio *folio, unsigned long nr)
> +static void remap_page(struct folio *folio, unsigned short nr)
>  {
> -       int i = 0;
> +       unsigned int i;
>
>         /* If unmap_page() uses try_to_migrate() on file, remove this check */
>         if (!folio_test_anon(folio))
> @@ -2274,7 +2276,6 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>                 struct lruvec *lruvec, struct list_head *list)
>  {
>         VM_BUG_ON_PAGE(!PageHead(head), head);
> -       VM_BUG_ON_PAGE(PageCompound(tail), head);
>         VM_BUG_ON_PAGE(PageLRU(tail), head);
>         lockdep_assert_held(&lruvec->lru_lock);
>
> @@ -2295,9 +2296,10 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
>  }
>
>  static void __split_huge_page_tail(struct page *head, int tail,
> -               struct lruvec *lruvec, struct list_head *list)
> +               struct lruvec *lruvec, struct list_head *list, unsigned int new_order)
>  {
>         struct page *page_tail = head + tail;
> +       unsigned long compound_head_flag = new_order ? (1L << PG_head) : 0;
>
>         VM_BUG_ON_PAGE(atomic_read(&page_tail->_mapcount) != -1, page_tail);
>
> @@ -2321,6 +2323,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>  #ifdef CONFIG_64BIT
>                          (1L << PG_arch_2) |
>  #endif
> +                        compound_head_flag |
>                          (1L << PG_dirty)));
>
>         /* ->mapping in first tail page is compound_mapcount */
> @@ -2329,7 +2332,10 @@ static void __split_huge_page_tail(struct page *head, int tail,
>         page_tail->mapping = head->mapping;
>         page_tail->index = head->index + tail;
>
> -       /* Page flags must be visible before we make the page non-compound. */
> +       /*
> +        * Page flags must be visible before we make the page non-compound or
> +        * a compound page in new_order.
> +        */
>         smp_wmb();
>
>         /*
> @@ -2339,10 +2345,15 @@ static void __split_huge_page_tail(struct page *head, int tail,
>          * which needs correct compound_head().
>          */
>         clear_compound_head(page_tail);
> +       if (new_order) {
> +               prep_compound_page(page_tail, new_order);
> +               prep_transhuge_page(page_tail);
> +       }
>
>         /* Finally unfreeze refcount. Additional reference from page cache. */
> -       page_ref_unfreeze(page_tail, 1 + (!PageAnon(head) ||
> -                                         PageSwapCache(head)));
> +       page_ref_unfreeze(page_tail, 1 + ((!PageAnon(head) ||
> +                                          PageSwapCache(head)) ?
> +                                               thp_nr_pages(page_tail) : 0));
>
>         if (page_is_young(head))
>                 set_page_young(page_tail);
> @@ -2360,7 +2371,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
>  }
>
>  static void __split_huge_page(struct page *page, struct list_head *list,
> -               pgoff_t end)
> +               pgoff_t end, unsigned int new_order)
>  {
>         struct folio *folio = page_folio(page);
>         struct page *head = &folio->page;
> @@ -2369,10 +2380,11 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>         unsigned long offset = 0;
>         unsigned int order = thp_order(head);
>         unsigned int nr = thp_nr_pages(head);
> +       unsigned int new_nr = 1 << new_order;
>         int i;
>
>         /* complete memcg works before add pages to LRU */
> -       split_page_memcg(head, nr, 0);
> +       split_page_memcg(head, nr, new_order);
>
>         if (PageAnon(head) && PageSwapCache(head)) {
>                 swp_entry_t entry = { .val = page_private(head) };
> @@ -2387,42 +2399,50 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>
>         ClearPageHasHWPoisoned(head);
>
> -       for (i = nr - 1; i >= 1; i--) {
> -               __split_huge_page_tail(head, i, lruvec, list);
> +       for (i = nr - new_nr; i >= new_nr; i -= new_nr) {
> +               __split_huge_page_tail(head, i, lruvec, list, new_order);
>                 /* Some pages can be beyond EOF: drop them from page cache */
>                 if (head[i].index >= end) {
>                         ClearPageDirty(head + i);
>                         __delete_from_page_cache(head + i, NULL);
>                         if (shmem_mapping(head->mapping))
> -                               shmem_uncharge(head->mapping->host, 1);
> +                               shmem_uncharge(head->mapping->host, new_nr);
>                         put_page(head + i);
>                 } else if (!PageAnon(page)) {
>                         __xa_store(&head->mapping->i_pages, head[i].index,
>                                         head + i, 0);
>                 } else if (swap_cache) {
> +                       /*
> +                        * split anonymous THPs (including swapped out ones) to
> +                        * non-zero order not supported
> +                        */
> +                       VM_BUG_ON(new_order);
>                         __xa_store(&swap_cache->i_pages, offset + i,
>                                         head + i, 0);
>                 }
>         }
>
> -       ClearPageCompound(head);
> +       if (!new_order)
> +               ClearPageCompound(head);
> +       else
> +               set_compound_order(head, new_order);
>         unlock_page_lruvec(lruvec);
>         /* Caller disabled irqs, so they are still disabled here */
>
> -       split_page_owner(head, order, 0);
> +       split_page_owner(head, order, new_order);
>
>         /* See comment in __split_huge_page_tail() */
>         if (PageAnon(head)) {
>                 /* Additional pin to swap cache */
>                 if (PageSwapCache(head)) {
> -                       page_ref_add(head, 2);
> +                       page_ref_add(head, 1 + new_nr);
>                         xa_unlock(&swap_cache->i_pages);
>                 } else {
>                         page_ref_inc(head);
>                 }
>         } else {
>                 /* Additional pin to page cache */
> -               page_ref_add(head, 2);
> +               page_ref_add(head, 1 + new_nr);
>                 xa_unlock(&head->mapping->i_pages);
>         }
>         local_irq_enable();
> @@ -2435,7 +2455,14 @@ static void __split_huge_page(struct page *page, struct list_head *list,
>                 split_swap_cluster(entry);
>         }
>
> -       for (i = 0; i < nr; i++) {
> +       /*
> +        * set page to its compound_head when split to THPs, so that GUP pin and
> +        * PG_locked are transferred to the right after-split page
> +        */
> +       if (new_order)
> +               page = compound_head(page);
> +
> +       for (i = 0; i < nr; i += new_nr) {
>                 struct page *subpage = head + i;
>                 if (subpage == page)
>                         continue;
> @@ -2472,36 +2499,60 @@ bool can_split_folio(struct folio *folio, int *pextra_pins)
>   * This function splits huge page into normal pages. @page can point to any
>   * subpage of huge page to split. Split doesn't change the position of @page.
>   *
> + * See split_huge_page_to_list_to_order() for more details.
> + *
> + * Returns 0 if the hugepage is split successfully.
> + * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
> + * us.
> + */
> +int split_huge_page_to_list(struct page *page, struct list_head *list)
> +{
> +       return split_huge_page_to_list_to_order(page, list, 0);
> +}
> +
> +/*
> + * This function splits huge page into pages in @new_order. @page can point to
> + * any subpage of huge page to split. Split doesn't change the position of
> + * @page.
> + *
>   * Only caller must hold pin on the @page, otherwise split fails with -EBUSY.
>   * The huge page must be locked.
>   *
>   * If @list is null, tail pages will be added to LRU list, otherwise, to @list.
>   *
> - * Both head page and tail pages will inherit mapping, flags, and so on from
> - * the hugepage.
> + * Pages in new_order will inherit mapping, flags, and so on from the hugepage.
>   *
> - * GUP pin and PG_locked transferred to @page. Rest subpages can be freed if
> - * they are not mapped.
> + * GUP pin and PG_locked transferred to @page or the compound page @page belongs
> + * to. Rest subpages can be freed if they are not mapped.
>   *
>   * Returns 0 if the hugepage is split successfully.
>   * Returns -EBUSY if the page is pinned or if anon_vma disappeared from under
>   * us.
>   */
> -int split_huge_page_to_list(struct page *page, struct list_head *list)
> +int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
> +                                    unsigned int new_order)
>  {
>         struct folio *folio = page_folio(page);
>         struct page *head = &folio->page;
>         struct deferred_split *ds_queue = get_deferred_split_queue(head);
> -       XA_STATE(xas, &head->mapping->i_pages, head->index);
> +       /* reset xarray order to new order after split */
> +       XA_STATE_ORDER(xas, &head->mapping->i_pages, head->index, new_order);
>         struct anon_vma *anon_vma = NULL;
>         struct address_space *mapping = NULL;
>         int extra_pins, ret;
>         pgoff_t end;
>
> +       VM_BUG_ON(thp_order(head) <= new_order);
>         VM_BUG_ON_PAGE(is_huge_zero_page(head), head);
>         VM_BUG_ON_PAGE(!PageLocked(head), head);
>         VM_BUG_ON_PAGE(!PageCompound(head), head);
>
> +       /* Cannot split THP to order-1 (no order-1 THPs) */
> +       VM_BUG_ON(new_order == 1);
> +
> +       /* Split anonymous THP to non-zero order not support */
> +       VM_BUG_ON(PageAnon(head) && new_order);
> +
>         if (PageWriteback(head))
>                 return -EBUSY;
>
> @@ -2582,7 +2633,7 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
>         if (page_ref_freeze(head, 1 + extra_pins)) {
>                 if (!list_empty(page_deferred_list(head))) {
>                         ds_queue->split_queue_len--;
> -                       list_del(page_deferred_list(head));
> +                       list_del_init(page_deferred_list(head));
>                 }
>                 spin_unlock(&ds_queue->split_queue_lock);
>                 if (mapping) {
> @@ -2592,14 +2643,18 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
>                         if (PageSwapBacked(head)) {
>                                 __mod_lruvec_page_state(head, NR_SHMEM_THPS,
>                                                         -nr);
> -                       } else {
> +                       } else if (!new_order) {
> +                               /*
> +                                * Decrease THP stats only if split to normal
> +                                * pages
> +                                */
>                                 __mod_lruvec_page_state(head, NR_FILE_THPS,
>                                                         -nr);
>                                 filemap_nr_thps_dec(mapping);
>                         }
>                 }
>
> -               __split_huge_page(page, list, end);
> +               __split_huge_page(page, list, end, new_order);
>                 ret = 0;
>         } else {
>                 spin_unlock(&ds_queue->split_queue_lock);
> --
> 2.35.1
>

[RFC PATCH 4/5] mm: truncate: split huge page cache page to a non-zero order if possible.

[Zi Yan]

From: Zi Yan <ziy@nvidia.com>

To minimize the number of pages after a huge page truncation, we do not
need to split it all the way down to order-0. The huge page has at most
three parts, the part before offset, the part to be truncated, the part
remaining at the end. Find the greatest common power of two multiplier of
the non-zero values of them as the new order, so we can split the huge
page to this order and keep the remaining pages as large and as few as
possible.

Signed-off-by: Zi Yan <ziy@nvidia.com>
---
 mm/huge_memory.c |  1 +
 mm/truncate.c    | 33 +++++++++++++++++++++++++++++++--
 2 files changed, 32 insertions(+), 2 deletions(-)

diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 3617aa3ad0b1..76db0092a1e2 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2349,6 +2349,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
 		prep_compound_page(page_tail, new_order);
 		prep_transhuge_page(page_tail);
 	}
+	VM_BUG_ON_PAGE(PageTail(page_tail), page_tail);
 
 	/* Finally unfreeze refcount. Additional reference from page cache. */
 	page_ref_unfreeze(page_tail, 1 + ((!PageAnon(head) ||
diff --git a/mm/truncate.c b/mm/truncate.c
index ab50d0d59a2a..4f71e67dec09 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -197,6 +197,14 @@ int truncate_inode_folio(struct address_space *mapping, struct folio *folio)
 	return 0;
 }
 
+static unsigned int greatest_pow_of_two_multiplier(unsigned int num)
+{
+	if (num & 1)
+		return 0;
+	return min_t(unsigned int, ilog2(num),
+		ilog2(num - rounddown_pow_of_two(num)));
+}
+
 /*
  * Handle partial folios.  The folio may be entirely within the
  * range if a split has raced with us.  If not, we zero the part of the
@@ -211,7 +219,8 @@ int truncate_inode_folio(struct address_space *mapping, struct folio *folio)
 bool truncate_inode_partial_folio(struct folio *folio, loff_t start, loff_t end)
 {
 	loff_t pos = folio_pos(folio);
-	unsigned int offset, length;
+	unsigned int offset, length, remaining;
+	unsigned int new_order = folio_order(folio);
 
 	if (pos < start)
 		offset = start - pos;
@@ -222,6 +231,7 @@ bool truncate_inode_partial_folio(struct folio *folio, loff_t start, loff_t end)
 		length = length - offset;
 	else
 		length = end + 1 - pos - offset;
+	remaining = folio_size(folio) - offset - length;
 
 	folio_wait_writeback(folio);
 	if (length == folio_size(folio)) {
@@ -236,11 +246,30 @@ bool truncate_inode_partial_folio(struct folio *folio, loff_t start, loff_t end)
 	 */
 	folio_zero_range(folio, offset, length);
 
+	/*
+	 * Find the greatest common power of two multiplier of the non-zero
+	 * offset, length, and remaining as the new order. So we can truncate
+	 * a subpage as large as possible.
+	 */
+	if (offset)
+		new_order = greatest_pow_of_two_multiplier(offset / PAGE_SIZE);
+	if (length)
+		new_order = min_t(unsigned int, new_order,
+			greatest_pow_of_two_multiplier(length / PAGE_SIZE));
+	if (remaining)
+		new_order = min_t(unsigned int, new_order,
+			greatest_pow_of_two_multiplier(remaining / PAGE_SIZE));
+
+	/* order-1 THP not supported, downgrade to order-0 */
+	if (new_order == 1)
+		new_order = 0;
+
+
 	if (folio_has_private(folio))
 		folio_invalidate(folio, offset, length);
 	if (!folio_test_large(folio))
 		return true;
-	if (split_huge_page(&folio->page) == 0)
+	if (split_huge_page_to_list_to_order(&folio->page, NULL, new_order) == 0)
 		return true;
 	if (folio_test_dirty(folio))
 		return false;
-- 
2.35.1

[RFC PATCH 4/5] mm: truncate: split huge page cache page to a non-zero order if possible.

[Zi Yan]

From: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

To minimize the number of pages after a huge page truncation, we do not
need to split it all the way down to order-0. The huge page has at most
three parts, the part before offset, the part to be truncated, the part
remaining at the end. Find the greatest common power of two multiplier of
the non-zero values of them as the new order, so we can split the huge
page to this order and keep the remaining pages as large and as few as
possible.

Signed-off-by: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 mm/huge_memory.c |  1 +
 mm/truncate.c    | 33 +++++++++++++++++++++++++++++++--
 2 files changed, 32 insertions(+), 2 deletions(-)

diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 3617aa3ad0b1..76db0092a1e2 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2349,6 +2349,7 @@ static void __split_huge_page_tail(struct page *head, int tail,
 		prep_compound_page(page_tail, new_order);
 		prep_transhuge_page(page_tail);
 	}
+	VM_BUG_ON_PAGE(PageTail(page_tail), page_tail);
 
 	/* Finally unfreeze refcount. Additional reference from page cache. */
 	page_ref_unfreeze(page_tail, 1 + ((!PageAnon(head) ||
diff --git a/mm/truncate.c b/mm/truncate.c
index ab50d0d59a2a..4f71e67dec09 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -197,6 +197,14 @@ int truncate_inode_folio(struct address_space *mapping, struct folio *folio)
 	return 0;
 }
 
+static unsigned int greatest_pow_of_two_multiplier(unsigned int num)
+{
+	if (num & 1)
+		return 0;
+	return min_t(unsigned int, ilog2(num),
+		ilog2(num - rounddown_pow_of_two(num)));
+}
+
 /*
  * Handle partial folios.  The folio may be entirely within the
  * range if a split has raced with us.  If not, we zero the part of the
@@ -211,7 +219,8 @@ int truncate_inode_folio(struct address_space *mapping, struct folio *folio)
 bool truncate_inode_partial_folio(struct folio *folio, loff_t start, loff_t end)
 {
 	loff_t pos = folio_pos(folio);
-	unsigned int offset, length;
+	unsigned int offset, length, remaining;
+	unsigned int new_order = folio_order(folio);
 
 	if (pos < start)
 		offset = start - pos;
@@ -222,6 +231,7 @@ bool truncate_inode_partial_folio(struct folio *folio, loff_t start, loff_t end)
 		length = length - offset;
 	else
 		length = end + 1 - pos - offset;
+	remaining = folio_size(folio) - offset - length;
 
 	folio_wait_writeback(folio);
 	if (length == folio_size(folio)) {
@@ -236,11 +246,30 @@ bool truncate_inode_partial_folio(struct folio *folio, loff_t start, loff_t end)
 	 */
 	folio_zero_range(folio, offset, length);
 
+	/*
+	 * Find the greatest common power of two multiplier of the non-zero
+	 * offset, length, and remaining as the new order. So we can truncate
+	 * a subpage as large as possible.
+	 */
+	if (offset)
+		new_order = greatest_pow_of_two_multiplier(offset / PAGE_SIZE);
+	if (length)
+		new_order = min_t(unsigned int, new_order,
+			greatest_pow_of_two_multiplier(length / PAGE_SIZE));
+	if (remaining)
+		new_order = min_t(unsigned int, new_order,
+			greatest_pow_of_two_multiplier(remaining / PAGE_SIZE));
+
+	/* order-1 THP not supported, downgrade to order-0 */
+	if (new_order == 1)
+		new_order = 0;
+
+
 	if (folio_has_private(folio))
 		folio_invalidate(folio, offset, length);
 	if (!folio_test_large(folio))
 		return true;
-	if (split_huge_page(&folio->page) == 0)
+	if (split_huge_page_to_list_to_order(&folio->page, NULL, new_order) == 0)
 		return true;
 	if (folio_test_dirty(folio))
 		return false;
-- 
2.35.1

Re: [RFC PATCH 4/5] mm: truncate: split huge page cache page to a non-zero order if possible.

[Roman Gushchin]

On Mon, Mar 21, 2022 at 10:21:27AM -0400, Zi Yan wrote:
> From: Zi Yan <ziy@nvidia.com>
> 
> To minimize the number of pages after a huge page truncation, we do not
> need to split it all the way down to order-0. The huge page has at most
> three parts, the part before offset, the part to be truncated, the part
> remaining at the end. Find the greatest common power of two multiplier of
> the non-zero values of them as the new order, so we can split the huge
> page to this order and keep the remaining pages as large and as few as
> possible.

Would you mind please to describe the algorithm in more details?

Thanks!

Re: [RFC PATCH 4/5] mm: truncate: split huge page cache page to a non-zero order if possible.

[Roman Gushchin]

On Mon, Mar 21, 2022 at 10:21:27AM -0400, Zi Yan wrote:
> From: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> 
> To minimize the number of pages after a huge page truncation, we do not
> need to split it all the way down to order-0. The huge page has at most
> three parts, the part before offset, the part to be truncated, the part
> remaining at the end. Find the greatest common power of two multiplier of
> the non-zero values of them as the new order, so we can split the huge
> page to this order and keep the remaining pages as large and as few as
> possible.

Would you mind please to describe the algorithm in more details?

Thanks!

Re: [RFC PATCH 4/5] mm: truncate: split huge page cache page to a non-zero order if possible.

[Zi Yan]

[-- Attachment #1: Type: text/plain, Size: 1333 bytes --]

On 21 Mar 2022, at 18:32, Roman Gushchin wrote:

> On Mon, Mar 21, 2022 at 10:21:27AM -0400, Zi Yan wrote:
>> From: Zi Yan <ziy@nvidia.com>
>>
>> To minimize the number of pages after a huge page truncation, we do not
>> need to split it all the way down to order-0. The huge page has at most
>> three parts, the part before offset, the part to be truncated, the part
>> remaining at the end. Find the greatest common power of two multiplier of
>> the non-zero values of them as the new order, so we can split the huge
>> page to this order and keep the remaining pages as large and as few as
>> possible.
>
> Would you mind please to describe the algorithm in more details?

Sure.

During truncation, there can be three parts in a huge page:
1. the _offset_ from the beginning of the huge page,
2. the _length_ of the to-be-truncated part,
3. the _remaining_ part after the to-be-truncated part.

the size of the split huge page need to be the greatest common divisor
of the non-zero ones of three after being rounded down to power of two.

OK, I actually find there is a gcd function. I think the algorithm can
simplified to

new_order = ilog2(gcd(gcd(offset, length), remaining)) - PAGE_SHIFT;

I will update the code, the commit message, and the comment in the next
version.

Thank you for the comment.

--
Best Regards,
Yan, Zi

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 854 bytes --]

Re: [RFC PATCH 4/5] mm: truncate: split huge page cache page to a non-zero order if possible.

[Zi Yan]

[-- Attachment #1: Type: text/plain, Size: 1335 bytes --]

On 21 Mar 2022, at 18:32, Roman Gushchin wrote:

> On Mon, Mar 21, 2022 at 10:21:27AM -0400, Zi Yan wrote:
>> From: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>>
>> To minimize the number of pages after a huge page truncation, we do not
>> need to split it all the way down to order-0. The huge page has at most
>> three parts, the part before offset, the part to be truncated, the part
>> remaining at the end. Find the greatest common power of two multiplier of
>> the non-zero values of them as the new order, so we can split the huge
>> page to this order and keep the remaining pages as large and as few as
>> possible.
>
> Would you mind please to describe the algorithm in more details?

Sure.

During truncation, there can be three parts in a huge page:
1. the _offset_ from the beginning of the huge page,
2. the _length_ of the to-be-truncated part,
3. the _remaining_ part after the to-be-truncated part.

the size of the split huge page need to be the greatest common divisor
of the non-zero ones of three after being rounded down to power of two.

OK, I actually find there is a gcd function. I think the algorithm can
simplified to

new_order = ilog2(gcd(gcd(offset, length), remaining)) - PAGE_SHIFT;

I will update the code, the commit message, and the comment in the next
version.

Thank you for the comment.

[mm] 2757cee2d6: UBSAN:shift-out-of-bounds_in_include/linux/log2.h

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 9426 bytes --]



Greeting,

FYI, we noticed the following commit (built with gcc-9):

commit: 2757cee2d6c6c76f672ec6566ade2dcb8c1605dd ("[RFC PATCH 4/5] mm: truncate: split huge page cache page to a non-zero order if possible.")
url: https://github.com/0day-ci/linux/commits/Zi-Yan/Split-a-huge-page-to-any-lower-order-pages/20220321-222304
base: https://github.com/hnaz/linux-mm master
patch link: https://lore.kernel.org/linux-mm/20220321142128.2471199-5-zi.yan@sent.com

in testcase: boot

on test machine: qemu-system-x86_64 -enable-kvm -cpu Icelake-Server -smp 4 -m 16G

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):



If you fix the issue, kindly add following tag
Reported-by: kernel test robot <oliver.sang@intel.com>


[   25.633813][  T275] UBSAN: shift-out-of-bounds in include/linux/log2.h:67:13
[   25.635404][  T275] shift exponent 4294967295 is too large for 32-bit type 'long unsigned int'
[   25.636781][  T275] CPU: 3 PID: 275 Comm: cron Not tainted 5.17.0-rc8-mm1-00485-g2757cee2d6c6 #1
[   25.638246][  T275] Call Trace:
[ 25.638768][ T275] dump_stack_lvl (lib/dump_stack.c:107) 
[ 25.651568][ T275] dump_stack (lib/dump_stack.c:114) 
[ 25.652209][ T275] ubsan_epilogue (lib/ubsan.c:152) 
[ 25.652926][ T275] __ubsan_handle_shift_out_of_bounds.cold (arch/x86/include/asm/smap.h:85) 
[ 25.654034][ T275] ? lock_release (kernel/locking/lockdep.c:5348 kernel/locking/lockdep.c:5692) 
[ 25.654781][ T275] ? __kmap_local_pfn_prot (mm/highmem.c:532) 
[ 25.655650][ T275] ? kunmap_local_indexed (mm/highmem.c:600 (discriminator 3)) 
[ 25.656382][ T275] ? zero_user_segments (mm/highmem.c:408) 
[ 25.657110][ T275] greatest_pow_of_two_multiplier.cold (include/linux/log2.h:67 mm/truncate.c:204) 
[ 25.658134][ T275] truncate_inode_partial_folio (mm/truncate.c:255) 
g System Logging[ 25.659902][ T275] shmem_undo_range (mm/shmem.c:966) 
Service...
[ 25.660789][ T275] ? zero_user_segments (mm/highmem.c:408) 
[ 25.661744][ T275] ? folio_mark_dirty (mm/page-writeback.c:2717) 
[ 25.662480][ T275] ? unlock_page (mm/folio-compat.c:21) 
[ 25.663179][ T275] ? __lock_acquire (kernel/locking/lockdep.c:5060) 
[ 25.668235][ T275] shmem_truncate_range (mm/shmem.c:1045) 
[ 25.668251][ T275] ? setattr_prepare (fs/attr.c:108) 
[ 25.668256][ T275] ? mark_held_locks (kernel/locking/lockdep.c:4239) 
Startin[ 25.668262][ T275] shmem_setattr (mm/shmem.c:1109) 
g /etc/rc.local [ 25.675802][ T275] ? shmem_setattr (mm/shmem.c:1109) 
Compatibility...[ 25.676621][ T275] ? current_time (fs/inode.c:2406) 

[ 25.677351][ T275] notify_change (fs/attr.c:414) 
[ 25.677989][ T275] ? shmem_evict_inode (mm/shmem.c:1077) 
[ 25.678735][ T275] ? notify_change (fs/attr.c:414) 
[ 25.679481][ T275] ? lock_acquire (kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5674) 
[ 25.680186][ T275] do_truncate (fs/open.c:67) 
[ 25.680843][ T275] ? do_truncate (fs/open.c:67) 
[ 25.681520][ T275] ? do_truncate (fs/open.c:67) 
[ 25.682230][ T275] do_sys_ftruncate (fs/open.c:197) 
[ 25.683001][ T275] __ia32_sys_ftruncate (fs/open.c:204) 
[ 25.684027][ T275] __do_fast_syscall_32 (arch/x86/entry/common.c:112 arch/x86/entry/common.c:178) 
[ 25.684801][ T275] ? irqentry_exit_to_user_mode (kernel/entry/common.c:324) 
[ 25.685720][ T275] do_fast_syscall_32 (arch/x86/entry/common.c:203) 
[ 25.686464][ T275] do_SYSENTER_32 (arch/x86/entry/common.c:247) 
[ 25.687172][ T275] entry_SYSENTER_32 (arch/x86/entry/entry_32.S:869) 
[   25.687180][  T275] EIP: 0xa7f00549
[ 25.687184][ T275] Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76
All code
========
   0:	03 74 c0 01          	add    0x1(%rax,%rax,8),%esi
   4:	10 05 03 74 b8 01    	adc    %al,0x1b87403(%rip)        # 0x1b8740d
   a:	10 06                	adc    %al,(%rsi)
   c:	03 74 b4 01          	add    0x1(%rsp,%rsi,4),%esi
  10:	10 07                	adc    %al,(%rdi)
  12:	03 74 b0 01          	add    0x1(%rax,%rsi,4),%esi
  16:	10 08                	adc    %cl,(%rax)
  18:	03 74 d8 01          	add    0x1(%rax,%rbx,8),%esi
  1c:	00 00                	add    %al,(%rax)
  1e:	00 00                	add    %al,(%rax)
  20:	00 51 52             	add    %dl,0x52(%rcx)
  23:	55                   	push   %rbp
  24:	89 e5                	mov    %esp,%ebp
  26:	0f 34                	sysenter 
  28:	cd 80                	int    $0x80
  2a:*	5d                   	pop    %rbp		<-- trapping instruction
  2b:	5a                   	pop    %rdx
  2c:	59                   	pop    %rcx
  2d:	c3                   	retq   
  2e:	90                   	nop
  2f:	90                   	nop
  30:	90                   	nop
  31:	90                   	nop
  32:	8d 76 00             	lea    0x0(%rsi),%esi
  35:	58                   	pop    %rax
  36:	b8 77 00 00 00       	mov    $0x77,%eax
  3b:	cd 80                	int    $0x80
  3d:	90                   	nop
  3e:	8d                   	.byte 0x8d
  3f:	76                   	.byte 0x76

Code starting with the faulting instruction
===========================================
   0:	5d                   	pop    %rbp
   1:	5a                   	pop    %rdx
   2:	59                   	pop    %rcx
   3:	c3                   	retq   
   4:	90                   	nop
   5:	90                   	nop
   6:	90                   	nop
   7:	90                   	nop
   8:	8d 76 00             	lea    0x0(%rsi),%esi
   b:	58                   	pop    %rax
   c:	b8 77 00 00 00       	mov    $0x77,%eax
  11:	cd 80                	int    $0x80
  13:	90                   	nop
  14:	8d                   	.byte 0x8d
  15:	76                   	.byte 0x76
[   25.687187][  T275] EAX: ffffffda EBX: 00000003 ECX: 00000004 EDX: 00453000
[   25.687190][  T275] ESI: 00000004 EDI: 00000002 EBP: 0207e168 ESP: aff7174c
[   25.687193][  T275] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000292
[   25.687280][  T275] ================================================================================
Starting LKP bootstrap...
[  OK  ] Started D-Bus System Message Bus.
[   25.719619] rc.local[280]: mkdir: cannot create directory '/var/lock/lkp-bootstrap.lock': File exists
[  OK  ] Started Daily Cleanup of Temporary Directories.
Starting Login Service...
[  OK  ] Started Daily apt upgrade and clean activities.
[  OK  ] Reached target Timers.
Starting LSB: Execute the kexec -e command to reboot system...
Starting OpenBSD Secure Shell server...
Starting Permit User Sessions...
[  OK  ] Started LKP bootstrap.
[  OK  ] Started Permit User Sessions.
[  OK  ] Started LSB: Start and stop bmc-watchdog.
[  OK  ] Started OpenBSD Secure Shell server.
[  OK  ] Started LSB: Execute the kexec -e command to reboot system.
[  OK  ] Started Login Service.
Starting LSB: Load kernel image with kexec...
LKP: ttyS0: 290: Kernel tests: Boot OK!
LKP: ttyS0: 290: HOSTNAME vm-icl-74, MAC 52:54:00:12:34:56, kernel 5.17.0-rc8-mm1-00485-g2757cee2d6c6 1
[  OK  ] Reached target Sound Card.
[  OK  ] Reached target Printer.
[  OK  ] Started LSB: Load kernel image with kexec.
LKP: ttyS0: 290:  /lkp/lkp/src/bin/run-lkp /lkp/jobs/scheduled/vm-icl-74/boot-1-debian-i386-20191205.cgz-2757cee2d6c6c76f672ec6566ade2dcb8c1605dd-20220322-39641-na3mp9-2.yaml
[   32.682503][  T516] wget (516) used greatest stack depth: 5812 bytes left
[  OK  ] Started System Logging Service.
[   36.389049][  T556] rsync (556) used greatest stack depth: 5772 bytes left
[   37.653297][  T315] LKP: stdout: 290: Kernel tests: Boot OK!
[   37.653316][  T315]
[   40.012523][  T605] wget (605) used greatest stack depth: 5732 bytes left
LKP: ttyS0: 290: LKP: rebooting forcely
[   42.275963][  T315] LKP: stdout: 290: HOSTNAME vm-icl-74, MAC 52:54:00:12:34:56, kernel 5.17.0-rc8-mm1-00485-g2757cee2d6c6 1
[   42.275991][  T315]
[   42.291539][  T315] install debs round one: dpkg -i --force-confdef --force-depends /opt/deb/gawk_1%3a4.1.4+dfsg-1_i386.deb
[   42.291562][  T315]
[   42.297409][  T315] Selecting previously unselected package gawk.
[   42.297426][  T315]
[   42.314957][  T315] (Reading database ... 16210 files and directories currently installed.)
[   42.314974][  T315]
[   42.319689][  T315] Preparing to unpack .../gawk_1%3a4.1.4+dfsg-1_i386.deb ...
[   42.319710][  T315]
[   42.323192][  T315] Unpacking gawk (1:4.1.4+dfsg-1) ...
[   42.323208][  T315]
[   42.326270][  T315] Setting up gawk (1:4.1.4+dfsg-1) ...
[   42.326285][  T315]
[   42.941438][  T290] sysrq: Emergency Sync
[   42.942418][   T36] Emergency Sync complete
[   42.943081][  T290] sysrq: Resetting

Kboot worker: lkp-worker04
Elapsed time: 60

kvm=(
qemu-system-x86_64
-enable-kvm


To reproduce:

        # build kernel
	cd linux
	cp config-5.17.0-rc8-mm1-00485-g2757cee2d6c6 .config
	make HOSTCC=gcc-9 CC=gcc-9 ARCH=i386 olddefconfig prepare modules_prepare bzImage modules
	make HOSTCC=gcc-9 CC=gcc-9 ARCH=i386 INSTALL_MOD_PATH=<mod-install-dir> modules_install
	cd <mod-install-dir>
	find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz


        git clone https://github.com/intel/lkp-tests.git
        cd lkp-tests
        bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email

        # if come across any failure that blocks the test,
        # please remove ~/.lkp and /lkp dir to run from a clean state.



-- 
0-DAY CI Kernel Test Service
https://01.org/lkp



[-- Attachment #2: config-5.17.0-rc8-mm1-00485-g2757cee2d6c6 --]
[-- Type: text/plain, Size: 125746 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 5.17.0-rc8-mm1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc-9 (Ubuntu 9.4.0-1ubuntu1~20.04) 9.4.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=90400
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23502
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23502
CONFIG_LLD_VERSION=0
CONFIG_RUST_IS_AVAILABLE=y
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=n
CONFIG_WERROR=n
CONFIG_UAPI_HEADER_TEST=y
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_KERNEL_GZIP=n
CONFIG_KERNEL_BZIP2=y
CONFIG_KERNEL_LZMA=n
CONFIG_KERNEL_XZ=n
CONFIG_KERNEL_LZO=n
CONFIG_KERNEL_LZ4=n
CONFIG_KERNEL_ZSTD=n
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=n
CONFIG_POSIX_MQUEUE=n
CONFIG_WATCH_QUEUE=n
CONFIG_CROSS_MEMORY_ATTACH=n
CONFIG_USELIB=y
CONFIG_AUDIT=n
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
CONFIG_HZ_PERIODIC=n
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=n
CONFIG_HIGH_RES_TIMERS=n
CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=100
# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=n
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
CONFIG_BPF_PRELOAD=n
# end of BPF subsystem

CONFIG_PREEMPT_VOLUNTARY_BUILD=y
CONFIG_PREEMPT_NONE=n
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_PREEMPT=n
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPT_DYNAMIC=n
CONFIG_SCHED_CORE=y
CONFIG_ARCH_WANTS_RT_DELAYED_SIGNALS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_SCHED_AVG_IRQ=y
CONFIG_BSD_PROCESS_ACCT=n
CONFIG_TASKSTATS=n
CONFIG_PSI=y
CONFIG_PSI_DEFAULT_DISABLED=n
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=n

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_RCU_EXPERT=n
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_IKHEADERS=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_PRINTK_INDEX=y
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y

#
# Scheduler features
#
CONFIG_UCLAMP_TASK=y
CONFIG_UCLAMP_BUCKETS_COUNT=5
# end of Scheduler features

CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_CGROUP_SCHED=n
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=n
CONFIG_CGROUP_HUGETLB=n
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=n
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=n
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=n
CONFIG_CHECKPOINT_RESTORE=n
CONFIG_SCHED_AUTOGROUP=n
CONFIG_SYSFS_DEPRECATED=n
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=n
CONFIG_BOOT_CONFIG=n
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=n
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=n
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=n
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=n
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=n
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=n
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=n

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# end of Kernel Performance Events And Counters

CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=n
CONFIG_SLAB=n
CONFIG_SLUB=y
CONFIG_SLOB=n
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=n
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_PROFILING=n
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_NR_GPIO=512
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_X86_32_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_MPPARSE=y
CONFIG_GOLDFISH=y
CONFIG_RETPOLINE=n
CONFIG_X86_BIGSMP=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_GOLDFISH=n
CONFIG_X86_INTEL_LPSS=n
CONFIG_X86_AMD_PLATFORM_DEVICE=n
CONFIG_IOSF_MBI=y
CONFIG_IOSF_MBI_DEBUG=y
CONFIG_X86_RDC321X=n
CONFIG_X86_32_NON_STANDARD=y
CONFIG_STA2X11=n
CONFIG_X86_32_IRIS=y
CONFIG_SCHED_OMIT_FRAME_POINTER=n
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_DEBUG=n
CONFIG_PARAVIRT_SPINLOCKS=n
CONFIG_X86_HV_CALLBACK_VECTOR=y
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
CONFIG_PVH=n
CONFIG_PARAVIRT_TIME_ACCOUNTING=n
CONFIG_PARAVIRT_CLOCK=y
CONFIG_M486SX=n
CONFIG_M486=n
CONFIG_M586=n
CONFIG_M586TSC=n
CONFIG_M586MMX=n
CONFIG_M686=y
CONFIG_MPENTIUMII=n
CONFIG_MPENTIUMIII=n
CONFIG_MPENTIUMM=n
CONFIG_MPENTIUM4=n
CONFIG_MK6=n
CONFIG_MK7=n
CONFIG_MK8=n
CONFIG_MCRUSOE=n
CONFIG_MEFFICEON=n
CONFIG_MWINCHIPC6=n
CONFIG_MWINCHIP3D=n
CONFIG_MELAN=n
CONFIG_MGEODEGX1=n
CONFIG_MGEODE_LX=n
CONFIG_MCYRIXIII=n
CONFIG_MVIAC3_2=n
CONFIG_MVIAC7=n
CONFIG_MCORE2=n
CONFIG_MATOM=n
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=6
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=n
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=n
CONFIG_CPU_SUP_HYGON=n
CONFIG_CPU_SUP_CENTAUR=n
CONFIG_CPU_SUP_TRANSMETA_32=n
CONFIG_CPU_SUP_UMC_32=n
CONFIG_CPU_SUP_ZHAOXIN=n
CONFIG_CPU_SUP_VORTEX_32=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=n
CONFIG_NR_CPUS_RANGE_BEGIN=2
CONFIG_NR_CPUS_RANGE_END=64
CONFIG_NR_CPUS_DEFAULT=32
CONFIG_NR_CPUS=32
CONFIG_SCHED_CLUSTER=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=n
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=n
CONFIG_X86_ANCIENT_MCE=y
CONFIG_X86_MCE_INJECT=y

#
# Performance monitoring
#
# end of Performance monitoring

CONFIG_X86_LEGACY_VM86=n
CONFIG_X86_IOPL_IOPERM=y
CONFIG_TOSHIBA=y
CONFIG_X86_REBOOTFIXUPS=n
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_NOHIGHMEM=n
CONFIG_HIGHMEM4G=y
CONFIG_HIGHMEM64G=n
CONFIG_VMSPLIT_3G=n
CONFIG_VMSPLIT_3G_OPT=y
CONFIG_VMSPLIT_2G=n
CONFIG_VMSPLIT_2G_OPT=n
CONFIG_VMSPLIT_1G=n
CONFIG_PAGE_OFFSET=0xB0000000
CONFIG_HIGHMEM=y
CONFIG_X86_CPA_STATISTICS=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=n
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=n
CONFIG_X86_PAT=n
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=n
CONFIG_X86_UMIP=y
CONFIG_CC_HAS_IBT=y
CONFIG_EFI=n
CONFIG_HZ_100=n
CONFIG_HZ_250=n
CONFIG_HZ_300=y
CONFIG_HZ_1000=n
CONFIG_HZ=300
CONFIG_KEXEC=n
CONFIG_CRASH_DUMP=n
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=n
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=n
CONFIG_DEBUG_HOTPLUG_CPU0=y
CONFIG_COMPAT_VDSO=n
CONFIG_CMDLINE_BOOL=n
CONFIG_MODIFY_LDT_SYSCALL=n
CONFIG_STRICT_SIGALTSTACK_SIZE=y
# end of Processor type and features

CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_SUSPEND_SKIP_SYNC=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=n
CONFIG_PM_WAKELOCKS=n
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=n
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_DPM_WATCHDOG=n
CONFIG_PM_TRACE_RTC=n
CONFIG_PM_CLK=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ENERGY_MODEL=y
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
CONFIG_ACPI_DEBUGGER=n
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=n
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_TAD=n
CONFIG_ACPI_DOCK=n
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=n
CONFIG_ACPI_THERMAL=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=n
CONFIG_ACPI_PCI_SLOT=n
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=n
CONFIG_ACPI_HED=n
CONFIG_ACPI_CUSTOM_METHOD=n
CONFIG_ACPI_REDUCED_HARDWARE_ONLY=n
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=n
CONFIG_ACPI_DPTF=n
CONFIG_ACPI_EXTLOG=n
CONFIG_ACPI_CONFIGFS=n
CONFIG_PMIC_OPREGION=n
CONFIG_X86_PM_TIMER=y
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
CONFIG_APM_IGNORE_USER_SUSPEND=n
CONFIG_APM_DO_ENABLE=n
CONFIG_APM_CPU_IDLE=n
CONFIG_APM_DISPLAY_BLANK=y
CONFIG_APM_ALLOW_INTS=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=n
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=n
CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=n
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=n
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
CONFIG_CPUFREQ_DT=n
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=n
CONFIG_X86_AMD_PSTATE=n
CONFIG_X86_ACPI_CPUFREQ=n
CONFIG_X86_POWERNOW_K6=y
CONFIG_X86_POWERNOW_K7=n
CONFIG_X86_GX_SUSPMOD=y
CONFIG_X86_SPEEDSTEP_CENTRINO=n
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=n
CONFIG_X86_P4_CLOCKMOD=y
CONFIG_X86_CPUFREQ_NFORCE2=n
CONFIG_X86_LONGRUN=n
CONFIG_X86_LONGHAUL=n
CONFIG_X86_E_POWERSAVER=n

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
# end of CPU Frequency scaling

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=n
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_GOV_TEO=n
CONFIG_CPU_IDLE_GOV_HALTPOLL=n
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle
# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
CONFIG_PCI_GOBIOS=n
CONFIG_PCI_GOMMCONFIG=n
CONFIG_PCI_GODIRECT=n
CONFIG_PCI_GOOLPC=y
CONFIG_PCI_GOANY=n
CONFIG_PCI_DIRECT=y
CONFIG_PCI_OLPC=y
CONFIG_PCI_CNB20LE_QUIRK=n
CONFIG_ISA_BUS=n
CONFIG_ISA_DMA_API=y
CONFIG_ISA=n
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
CONFIG_OLPC=y
CONFIG_OLPC_XO1_PM=y
CONFIG_OLPC_XO1_SCI=y
CONFIG_OLPC_XO15_SCI=n
CONFIG_ALIX=n
CONFIG_NET5501=n
# end of Bus options (PCI etc.)

#
# Binary Emulations
#
CONFIG_COMPAT_32=y
# end of Binary Emulations

CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=n
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y

#
# General architecture-dependent options
#
CONFIG_HOTPLUG_SMT=y
CONFIG_GENERIC_ENTRY=y
CONFIG_KPROBES=n
CONFIG_JUMP_LABEL=n
CONFIG_STATIC_CALL_SELFTEST=n
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
CONFIG_SECCOMP_CACHE_DEBUG=n
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=n
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ISA_BUS_API=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_LOCK_EVENT_COUNTS=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SPLIT_ARG64=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=n
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=n
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=n
CONFIG_MODVERSIONS=n
CONFIG_MODULE_SRCVERSION_ALL=n
CONFIG_MODULE_SIG=n
CONFIG_MODULE_COMPRESS_NONE=y
CONFIG_MODULE_COMPRESS_GZIP=n
CONFIG_MODULE_COMPRESS_XZ=n
CONFIG_MODULE_COMPRESS_ZSTD=n
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_TRIM_UNUSED_KSYMS=n
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=n
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=n
# end of Executable file formats

#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=n
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=n
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_SYSFS=y
CONFIG_CMA_AREAS=7
CONFIG_ZPOOL=y
CONFIG_ZBUD=n
CONFIG_Z3FOLD=n
CONFIG_ZSMALLOC=n
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_ARCH_HAS_ZONE_DMA_SET=y
CONFIG_ZONE_DMA=y
CONFIG_VMAP_PFN=y
CONFIG_PERCPU_STATS=n
CONFIG_GUP_TEST=n
CONFIG_READ_ONLY_THP_FOR_FS=y
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_MAPPING_DIRTY_HELPERS=y
CONFIG_KMAP_LOCAL=y

#
# Data Access Monitoring
#
CONFIG_DAMON=n
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=n
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=n
CONFIG_TLS=n
CONFIG_XFRM_USER=n
CONFIG_NET_KEY=n
CONFIG_XDP_SOCKETS=n
CONFIG_INET=y
CONFIG_IP_MULTICAST=n
CONFIG_IP_ADVANCED_ROUTER=n
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=n
CONFIG_IP_PNP_RARP=n
CONFIG_NET_IPIP=n
CONFIG_NET_IPGRE_DEMUX=n
CONFIG_NET_IP_TUNNEL=y
CONFIG_SYN_COOKIES=n
CONFIG_NET_IPVTI=n
CONFIG_NET_FOU=n
CONFIG_NET_FOU_IP_TUNNELS=n
CONFIG_INET_AH=n
CONFIG_INET_ESP=n
CONFIG_INET_IPCOMP=n
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=n
CONFIG_INET_RAW_DIAG=n
CONFIG_INET_DIAG_DESTROY=n
CONFIG_TCP_CONG_ADVANCED=n
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=n
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=n
CONFIG_IPV6_OPTIMISTIC_DAD=n
CONFIG_INET6_AH=n
CONFIG_INET6_ESP=n
CONFIG_INET6_IPCOMP=n
CONFIG_IPV6_MIP6=n
CONFIG_IPV6_VTI=n
CONFIG_IPV6_SIT=y
CONFIG_IPV6_SIT_6RD=n
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=n
CONFIG_IPV6_MULTIPLE_TABLES=n
CONFIG_IPV6_MROUTE=n
CONFIG_IPV6_SEG6_LWTUNNEL=n
CONFIG_IPV6_SEG6_HMAC=n
CONFIG_IPV6_RPL_LWTUNNEL=n
CONFIG_IPV6_IOAM6_LWTUNNEL=n
CONFIG_NETLABEL=n
CONFIG_MPTCP=n
CONFIG_NETWORK_SECMARK=n
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=n
CONFIG_NETFILTER=n
CONFIG_BPFILTER=n
CONFIG_IP_DCCP=n
CONFIG_IP_SCTP=n
CONFIG_RDS=n
CONFIG_TIPC=n
CONFIG_ATM=n
CONFIG_L2TP=n
CONFIG_BRIDGE=n
CONFIG_NET_DSA=n
CONFIG_VLAN_8021Q=n
CONFIG_DECNET=n
CONFIG_LLC2=n
CONFIG_ATALK=n
CONFIG_X25=n
CONFIG_LAPB=n
CONFIG_PHONET=n
CONFIG_6LOWPAN=n
CONFIG_IEEE802154=n
CONFIG_NET_SCHED=n
CONFIG_DCB=n
CONFIG_DNS_RESOLVER=m
CONFIG_BATMAN_ADV=n
CONFIG_OPENVSWITCH=n
CONFIG_VSOCKETS=n
CONFIG_NETLINK_DIAG=n
CONFIG_MPLS=n
CONFIG_NET_NSH=n
CONFIG_HSR=n
CONFIG_NET_SWITCHDEV=n
CONFIG_NET_L3_MASTER_DEV=n
CONFIG_QRTR=n
CONFIG_NET_NCSI=n
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=n
CONFIG_CGROUP_NET_CLASSID=n
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=n
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=n
CONFIG_NET_DROP_MONITOR=n
# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=n
CONFIG_CAN=n
CONFIG_BT=n
CONFIG_AF_RXRPC=n
CONFIG_AF_KCM=n
CONFIG_MCTP=n
CONFIG_WIRELESS=y
CONFIG_CFG80211=n

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=n
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NET_9P_DEBUG=n
CONFIG_CAIF=n
CONFIG_CEPH_LIB=n
CONFIG_NFC=n
CONFIG_PSAMPLE=n
CONFIG_NET_IFE=n
CONFIG_LWTUNNEL=n
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
CONFIG_PAGE_POOL_STATS=n
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=n
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=n
CONFIG_EISA_NAMES=y
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=n
CONFIG_PCIEAER=n
CONFIG_PCIEASPM=n
CONFIG_PCIE_PME=y
CONFIG_PCIE_PTM=n
CONFIG_PCI_MSI=n
CONFIG_PCI_QUIRKS=y
CONFIG_PCI_DEBUG=n
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=n
CONFIG_PCI_PF_STUB=y
CONFIG_PCI_ATS=y
CONFIG_PCI_ECAM=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
CONFIG_PCIE_BUS_TUNE_OFF=n
CONFIG_PCIE_BUS_DEFAULT=n
CONFIG_PCIE_BUS_SAFE=n
CONFIG_PCIE_BUS_PERFORMANCE=n
CONFIG_PCIE_BUS_PEER2PEER=y
CONFIG_VGA_ARB=n
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=n
CONFIG_HOTPLUG_PCI_CPCI=n
CONFIG_HOTPLUG_PCI_SHPC=n

#
# PCI controller drivers
#
CONFIG_PCI_FTPCI100=n
CONFIG_PCI_HOST_COMMON=y
CONFIG_PCI_HOST_GENERIC=y

#
# DesignWare PCI Core Support
#
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
CONFIG_PCIE_CADENCE=y
CONFIG_PCIE_CADENCE_HOST=y
CONFIG_PCIE_CADENCE_EP=y
CONFIG_PCIE_CADENCE_PLAT=y
CONFIG_PCIE_CADENCE_PLAT_HOST=y
CONFIG_PCIE_CADENCE_PLAT_EP=n
CONFIG_PCI_J721E=y
CONFIG_PCI_J721E_HOST=y
CONFIG_PCI_J721E_EP=y
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
CONFIG_PCI_EPF_TEST=n
CONFIG_PCI_EPF_NTB=y
# end of PCI Endpoint

#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=y
# end of PCI switch controller drivers

CONFIG_CXL_BUS=n
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=n
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=n
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=n
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
CONFIG_RAPIDIO_DMA_ENGINE=n
CONFIG_RAPIDIO_DEBUG=n
CONFIG_RAPIDIO_ENUM_BASIC=y
CONFIG_RAPIDIO_CHMAN=y
CONFIG_RAPIDIO_MPORT_CDEV=y

#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_CPS_XX=n
CONFIG_RAPIDIO_CPS_GEN2=y
CONFIG_RAPIDIO_RXS_GEN3=n
# end of RapidIO Switch drivers

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=n
CONFIG_DEVTMPFS_SAFE=n
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_CACHE=n
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
CONFIG_DEBUG_DRIVER=n
CONFIG_DEBUG_DEVRES=n
CONFIG_DEBUG_TEST_DRIVER_REMOVE=n
CONFIG_TEST_ASYNC_DRIVER_PROBE=n
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=y
CONFIG_REGMAP_SOUNDWIRE_MBQ=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=n
# end of Generic Driver Options

#
# Bus devices
#
CONFIG_MHI_BUS=y
CONFIG_MHI_BUS_DEBUG=y
CONFIG_MHI_BUS_PCI_GENERIC=y
CONFIG_MHI_BUS_EP=n
# end of Bus devices

CONFIG_CONNECTOR=n

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol

CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_FW_CFG_SYSFS=y
CONFIG_FW_CFG_SYSFS_CMDLINE=y
CONFIG_SYSFB=y
CONFIG_SYSFB_SIMPLEFB=n
CONFIG_CS_DSP=y
CONFIG_GOOGLE_FIRMWARE=y
CONFIG_GOOGLE_COREBOOT_TABLE=y
CONFIG_GOOGLE_MEMCONSOLE=y
CONFIG_GOOGLE_MEMCONSOLE_COREBOOT=y
CONFIG_GOOGLE_VPD=y

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=y
CONFIG_GNSS_MTK_SERIAL=n
CONFIG_GNSS_SIRF_SERIAL=y
CONFIG_GNSS_UBX_SERIAL=y
CONFIG_MTD=y
CONFIG_MTD_TESTS=n

#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=y
CONFIG_MTD_CMDLINE_PARTS=n
CONFIG_MTD_OF_PARTS=n
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=n
CONFIG_MTD_REDBOOT_PARTS_READONLY=n
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_OOPS=y
CONFIG_MTD_PARTITIONED_MASTER=n

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=n
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_OF=n
CONFIG_MTD_PHYSMAP_GPIO_ADDR=n
CONFIG_MTD_SBC_GXX=n
CONFIG_MTD_SCx200_DOCFLASH=n
CONFIG_MTD_AMD76XROM=n
CONFIG_MTD_ICHXROM=y
CONFIG_MTD_ESB2ROM=y
CONFIG_MTD_CK804XROM=y
CONFIG_MTD_SCB2_FLASH=y
CONFIG_MTD_NETtel=n
CONFIG_MTD_L440GX=n
CONFIG_MTD_PCI=n
CONFIG_MTD_PCMCIA=y
CONFIG_MTD_PCMCIA_ANONYMOUS=n
CONFIG_MTD_INTEL_VR_NOR=n
CONFIG_MTD_PLATRAM=y
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=n
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=n
# end of Self-contained MTD device drivers

#
# NAND
#
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=n
CONFIG_MTD_ONENAND_GENERIC=y
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_RAW_NAND=n

#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=n
CONFIG_MTD_NAND_ECC_SW_BCH=y
CONFIG_MTD_NAND_ECC_MXIC=n
# end of ECC engine support
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=n
# end of LPDDR & LPDDR2 PCM memory drivers

CONFIG_MTD_UBI=n
CONFIG_MTD_HYPERBUS=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=n
CONFIG_OF_PROMTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_OVERLAY=n
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=n
CONFIG_PARPORT_PC_FIFO=n
CONFIG_PARPORT_PC_SUPERIO=n
CONFIG_PARPORT_PC_PCMCIA=n
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y

#
# NVME Support
#
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_DUMMY_IRQ=y
CONFIG_IBM_ASM=n
CONFIG_PHANTOM=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
CONFIG_CS5535_CLOCK_EVENT_SRC=n
CONFIG_HP_ILO=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=n
CONFIG_SENSORS_TSL2550=n
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
CONFIG_VMWARE_BALLOON=n
CONFIG_PCH_PHUB=y
CONFIG_SRAM=y
CONFIG_DW_XDATA_PCIE=n
CONFIG_PCI_ENDPOINT_TEST=n
CONFIG_XILINX_SDFEC=y
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_IDT_89HPESX=y
CONFIG_EEPROM_EE1004=n
# end of EEPROM support

CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=n
# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_I2C=y
CONFIG_ALTERA_STAPL=y
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
CONFIG_INTEL_MEI_TXE=y
CONFIG_INTEL_MEI_HDCP=y
CONFIG_INTEL_MEI_PXP=y
CONFIG_VMWARE_VMCI=y
CONFIG_ECHO=y
CONFIG_MISC_ALCOR_PCI=n
CONFIG_MISC_RTSX_PCI=n
CONFIG_HABANA_AI=y
CONFIG_UACCE=y
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=n
CONFIG_PVPANIC_PCI=n
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# end of SCSI device support

CONFIG_FUSION=n

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_NET=n
CONFIG_FIREWIRE_NOSY=n
# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=n
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=n
CONFIG_DUMMY=n
CONFIG_WIREGUARD=n
CONFIG_EQUALIZER=n
CONFIG_NET_TEAM=n
CONFIG_MACVLAN=n
CONFIG_IPVLAN=n
CONFIG_VXLAN=n
CONFIG_GENEVE=n
CONFIG_BAREUDP=n
CONFIG_GTP=n
CONFIG_MACSEC=n
CONFIG_NETCONSOLE=n
CONFIG_NTB_NETDEV=n
CONFIG_RIONET=n
CONFIG_TUN=n
CONFIG_TUN_VNET_CROSS_LE=n
CONFIG_VETH=n
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=n
CONFIG_MHI_NET=n
CONFIG_ARCNET=n
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL3=n
CONFIG_PCMCIA_3C574=n
CONFIG_PCMCIA_3C589=n
CONFIG_VORTEX=n
CONFIG_TYPHOON=n
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=n
CONFIG_NET_VENDOR_AGERE=y
CONFIG_ET131X=n
CONFIG_NET_VENDOR_ALACRITECH=y
CONFIG_SLICOSS=n
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=n
CONFIG_ALTERA_TSE=n
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AMD=n
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_AQTION=n
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=n
CONFIG_ATL1=n
CONFIG_ATL1E=n
CONFIG_ATL1C=n
CONFIG_ALX=n
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=n
CONFIG_BCMGENET=n
CONFIG_BNX2=n
CONFIG_CNIC=n
CONFIG_TIGON3=n
CONFIG_BNX2X=n
CONFIG_SYSTEMPORT=n
CONFIG_BNXT=n
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=n
CONFIG_NET_VENDOR_CADENCE=y
CONFIG_MACB=n
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=n
CONFIG_CHELSIO_T3=n
CONFIG_CHELSIO_T4=n
CONFIG_CHELSIO_T4VF=n
CONFIG_NET_VENDOR_CIRRUS=y
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=n
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_GEMINI_ETHERNET=n
CONFIG_CX_ECAT=n
CONFIG_NET_VENDOR_DAVICOM=y
CONFIG_DNET=n
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=n
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=n
CONFIG_SUNDANCE=n
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=n
CONFIG_NET_VENDOR_ENGLEDER=y
CONFIG_TSNEP=n
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=n
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_PCMCIA_FMVJ18X=n
CONFIG_NET_VENDOR_FUNGIBLE=y
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=n
CONFIG_E1000=y
CONFIG_E1000E=n
CONFIG_IGB=n
CONFIG_IGBVF=n
CONFIG_IXGB=n
CONFIG_IXGBE=n
CONFIG_I40E=n
CONFIG_IGC=n
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_JME=n
CONFIG_NET_VENDOR_LITEX=y
CONFIG_LITEX_LITEETH=n
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=n
CONFIG_SKGE=n
CONFIG_SKY2=n
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=n
CONFIG_MLX5_CORE=n
CONFIG_MLXSW_CORE=n
CONFIG_MLXFW=n
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=n
CONFIG_KS8851_MLL=n
CONFIG_KSZ884X_PCI=n
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_LAN743X=n
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=n
CONFIG_FEALNX=n
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=n
CONFIG_NS83820=n
CONFIG_NET_VENDOR_NETERION=y
CONFIG_S2IO=n
CONFIG_VXGE=n
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_NI=y
CONFIG_NI_XGE_MANAGEMENT_ENET=n
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=n
CONFIG_NE2K_PCI=n
CONFIG_PCMCIA_PCNET=n
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=n
CONFIG_NET_VENDOR_OKI=y
CONFIG_PCH_GBE=n
CONFIG_ETHOC=n
CONFIG_NET_VENDOR_PACKET_ENGINES=y
CONFIG_HAMACHI=n
CONFIG_YELLOWFIN=n
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=n
CONFIG_QLCNIC=n
CONFIG_NETXEN_NIC=n
CONFIG_QED=n
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_QCA7000_UART=n
CONFIG_QCOM_EMAC=n
CONFIG_RMNET=n
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=n
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_ATP=n
CONFIG_8139CP=n
CONFIG_8139TOO=n
CONFIG_R8169=n
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
CONFIG_SXGBE_ETH=n
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=n
CONFIG_SFC_FALCON=n
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=n
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=n
CONFIG_SIS190=n
CONFIG_NET_VENDOR_SMSC=y
CONFIG_PCMCIA_SMC91C92=n
CONFIG_EPIC100=n
CONFIG_SMSC911X=n
CONFIG_SMSC9420=n
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=n
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=n
CONFIG_SUNGEM=n
CONFIG_CASSINI=n
CONFIG_NIU=n
CONFIG_NET_VENDOR_SYNOPSYS=y
CONFIG_DWC_XLGMAC=n
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=n
CONFIG_NET_VENDOR_TI=y
CONFIG_TI_CPSW_PHY_SEL=n
CONFIG_TLAN=n
CONFIG_NET_VENDOR_VERTEXCOM=y
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=n
CONFIG_VIA_VELOCITY=n
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=n
CONFIG_WIZNET_W5300=n
CONFIG_NET_VENDOR_XILINX=y
CONFIG_XILINX_EMACLITE=n
CONFIG_XILINX_AXI_EMAC=n
CONFIG_XILINX_LL_TEMAC=n
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=n
CONFIG_FDDI=n
CONFIG_HIPPI=n
CONFIG_NET_SB1000=n
CONFIG_PHYLIB=n
CONFIG_MDIO_DEVICE=n

#
# PCS device drivers
#
# end of PCS device drivers

CONFIG_PLIP=n
CONFIG_PPP=n
CONFIG_SLIP=n

#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_WLAN_VENDOR_ATH=y
CONFIG_ATH_DEBUG=n
CONFIG_ATH5K_PCI=n
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_IWLMEI=n
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=n
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
CONFIG_PCMCIA_RAYCS=n
CONFIG_WAN=n

#
# Wireless WAN
#
CONFIG_WWAN=n
# end of Wireless WAN

CONFIG_VMXNET3=n
CONFIG_FUJITSU_ES=n
CONFIG_USB4_NET=n
CONFIG_NETDEVSIM=n
CONFIG_NET_FAILOVER=m
CONFIG_ISDN=n

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=n
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5520=n
CONFIG_KEYBOARD_ADP5588=n
CONFIG_KEYBOARD_ADP5589=n
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1050=n
CONFIG_KEYBOARD_QT1070=n
CONFIG_KEYBOARD_QT2160=n
CONFIG_KEYBOARD_DLINK_DIR685=n
CONFIG_KEYBOARD_LKKBD=n
CONFIG_KEYBOARD_GPIO=n
CONFIG_KEYBOARD_GPIO_POLLED=n
CONFIG_KEYBOARD_TCA6416=n
CONFIG_KEYBOARD_TCA8418=n
CONFIG_KEYBOARD_MATRIX=n
CONFIG_KEYBOARD_LM8323=n
CONFIG_KEYBOARD_LM8333=n
CONFIG_KEYBOARD_MAX7359=n
CONFIG_KEYBOARD_MCS=n
CONFIG_KEYBOARD_MPR121=n
CONFIG_KEYBOARD_NEWTON=n
CONFIG_KEYBOARD_OPENCORES=n
CONFIG_KEYBOARD_SAMSUNG=n
CONFIG_KEYBOARD_GOLDFISH_EVENTS=n
CONFIG_KEYBOARD_STOWAWAY=n
CONFIG_KEYBOARD_SUNKBD=n
CONFIG_KEYBOARD_IQS62X=n
CONFIG_KEYBOARD_OMAP4=n
CONFIG_KEYBOARD_TC3589X=n
CONFIG_KEYBOARD_TM2_TOUCHKEY=n
CONFIG_KEYBOARD_TWL4030=n
CONFIG_KEYBOARD_XTKBD=n
CONFIG_KEYBOARD_CAP11XX=n
CONFIG_KEYBOARD_BCM=n
CONFIG_KEYBOARD_MTK_PMIC=n
CONFIG_KEYBOARD_CYPRESS_SF=n
CONFIG_INPUT_MOUSE=n
CONFIG_INPUT_JOYSTICK=n
CONFIG_INPUT_TABLET=n
CONFIG_INPUT_TOUCHSCREEN=n
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=n
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
CONFIG_INPUT_ATC260X_ONKEY=n
CONFIG_INPUT_ATMEL_CAPTOUCH=y
CONFIG_INPUT_BMA150=y
CONFIG_INPUT_E3X0_BUTTON=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_MAX8925_ONKEY=y
CONFIG_INPUT_MAX8997_HAPTIC=y
CONFIG_INPUT_MC13783_PWRBUTTON=n
CONFIG_INPUT_MMA8450=y
CONFIG_INPUT_APANEL=n
CONFIG_INPUT_GPIO_BEEPER=y
CONFIG_INPUT_GPIO_DECODER=y
CONFIG_INPUT_GPIO_VIBRA=y
CONFIG_INPUT_WISTRON_BTNS=n
CONFIG_INPUT_ATLAS_BTNS=n
CONFIG_INPUT_ATI_REMOTE2=n
CONFIG_INPUT_KEYSPAN_REMOTE=n
CONFIG_INPUT_KXTJ9=y
CONFIG_INPUT_POWERMATE=n
CONFIG_INPUT_YEALINK=n
CONFIG_INPUT_CM109=n
CONFIG_INPUT_REGULATOR_HAPTIC=n
CONFIG_INPUT_RETU_PWRBUTTON=n
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_INPUT_TWL4030_VIBRA=y
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PCF50633_PMU=n
CONFIG_INPUT_PCF8574=n
CONFIG_INPUT_PWM_BEEPER=n
CONFIG_INPUT_PWM_VIBRA=n
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
CONFIG_INPUT_DA7280_HAPTICS=y
CONFIG_INPUT_DA9052_ONKEY=n
CONFIG_INPUT_DA9055_ONKEY=y
CONFIG_INPUT_DA9063_ONKEY=y
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_ADXL34X=y
CONFIG_INPUT_ADXL34X_I2C=y
CONFIG_INPUT_IQS269A=n
CONFIG_INPUT_IQS626A=n
CONFIG_INPUT_CMA3000=n
CONFIG_INPUT_IDEAPAD_SLIDEBAR=y
CONFIG_INPUT_DRV260X_HAPTICS=y
CONFIG_INPUT_DRV2665_HAPTICS=n
CONFIG_INPUT_DRV2667_HAPTICS=y
CONFIG_INPUT_STPMIC1_ONKEY=n
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
CONFIG_RMI4_SMB=y
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=n
CONFIG_RMI4_F3A=y
CONFIG_RMI4_F55=n

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=n
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=n
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=n
CONFIG_GAMEPORT_L4=n
CONFIG_GAMEPORT_EMU10K1=n
CONFIG_GAMEPORT_FM801=n
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=n
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=n
CONFIG_LDISC_AUTOLOAD=n

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_16550A_VARIANTS=n
CONFIG_SERIAL_8250_FINTEK=n
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_CS=n
CONFIG_SERIAL_8250_MEN_MCB=n
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=n
CONFIG_SERIAL_8250_ASPEED_VUART=n
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_DW=n
CONFIG_SERIAL_8250_RT288X=n
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
CONFIG_SERIAL_8250_PERICOM=y
CONFIG_SERIAL_OF_PLATFORM=n

#
# Non-8250 serial port support
#
CONFIG_SERIAL_UARTLITE=n
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=n
CONFIG_SERIAL_SIFIVE=y
CONFIG_SERIAL_SIFIVE_CONSOLE=y
CONFIG_SERIAL_LANTIQ=y
CONFIG_SERIAL_LANTIQ_CONSOLE=n
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=n
CONFIG_SERIAL_SC16IS7XX_CORE=y
CONFIG_SERIAL_SC16IS7XX=y
CONFIG_SERIAL_SC16IS7XX_I2C=y
CONFIG_SERIAL_TIMBERDALE=n
CONFIG_SERIAL_BCM63XX=n
CONFIG_SERIAL_ALTERA_JTAGUART=n
CONFIG_SERIAL_ALTERA_UART=n
CONFIG_SERIAL_PCH_UART=y
CONFIG_SERIAL_PCH_UART_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=n
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_SERIAL_FSL_LINFLEXUART=n
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
CONFIG_SERIAL_MEN_Z135=y
CONFIG_SERIAL_SPRD=y
CONFIG_SERIAL_SPRD_CONSOLE=y
CONFIG_SERIAL_LITEUART=y
CONFIG_SERIAL_LITEUART_MAX_PORTS=1
CONFIG_SERIAL_LITEUART_CONSOLE=y
CONFIG_SERIAL_SUNPLUS=n
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=n
CONFIG_GOLDFISH_TTY=n
CONFIG_N_GSM=n
CONFIG_NOZOMI=y
CONFIG_NULL_TTY=n
CONFIG_RPMSG_TTY=n
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=n
CONFIG_TTY_PRINTK=y
CONFIG_TTY_PRINTK_LEVEL=6
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
CONFIG_VIRTIO_CONSOLE=n
CONFIG_IPMI_HANDLER=n
CONFIG_IPMB_DEVICE_INTERFACE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=n
CONFIG_HW_RANDOM_AMD=n
CONFIG_HW_RANDOM_BA431=n
CONFIG_HW_RANDOM_GEODE=n
CONFIG_HW_RANDOM_VIA=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_CCTRNG=y
CONFIG_HW_RANDOM_XIPHERA=y
CONFIG_APPLICOM=y
CONFIG_SONYPI=n

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=n
CONFIG_CARDMAN_4000=n
CONFIG_CARDMAN_4040=y
CONFIG_SCR24X=n
CONFIG_IPWIRELESS=n
# end of PCMCIA character devices

CONFIG_MWAVE=n
CONFIG_SCx200_GPIO=y
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
CONFIG_DEVMEM=y
CONFIG_NVRAM=n
CONFIG_DEVPORT=n
CONFIG_HPET=n
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=n
CONFIG_TCG_TIS=n
CONFIG_TCG_TIS_I2C_CR50=y
CONFIG_TCG_TIS_I2C_ATMEL=y
CONFIG_TCG_TIS_I2C_INFINEON=n
CONFIG_TCG_TIS_I2C_NUVOTON=n
CONFIG_TCG_NSC=n
CONFIG_TCG_ATMEL=y
CONFIG_TCG_INFINEON=n
CONFIG_TCG_CRB=n
CONFIG_TCG_VTPM_PROXY=n
CONFIG_TCG_TIS_ST33ZP24_I2C=n
CONFIG_TELCLOCK=y
CONFIG_XILLYBUS_CLASS=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_OF=n
CONFIG_RANDOM_TRUST_CPU=n
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=n
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_GPMUX=y
CONFIG_I2C_MUX_LTC4306=y
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=n
CONFIG_I2C_MUX_REG=y
CONFIG_I2C_DEMUX_PINCTRL=y
CONFIG_I2C_MUX_MLXCPLD=y
# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=n
CONFIG_I2C_SMBUS=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
# end of I2C Algorithms

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=y
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=n
CONFIG_I2C_AMD8111=n
CONFIG_I2C_AMD_MP2=n
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=n
CONFIG_I2C_ISMT=n
CONFIG_I2C_PIIX4=n
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_NFORCE2_S4985=y
CONFIG_I2C_NVIDIA_GPU=n
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=n
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y

#
# ACPI drivers
#
CONFIG_I2C_SCMI=n

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_SLAVE=n
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DESIGNWARE_AMDPSP=n
CONFIG_I2C_DESIGNWARE_BAYTRAIL=n
CONFIG_I2C_DESIGNWARE_PCI=y
CONFIG_I2C_EG20T=n
CONFIG_I2C_EMEV2=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_GPIO_FAULT_INJECTOR=n
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_PXA=y
CONFIG_I2C_PXA_PCI=y
CONFIG_I2C_RK3X=n
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=n

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=n
CONFIG_I2C_TAOS_EVM=y

#
# Other I2C/SMBus bus drivers
#
CONFIG_SCx200_ACB=y
CONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support

CONFIG_I2C_STUB=n
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
CONFIG_I2C_SLAVE_TESTUNIT=y
CONFIG_I2C_DEBUG_CORE=n
CONFIG_I2C_DEBUG_ALGO=n
CONFIG_I2C_DEBUG_BUS=n
# end of I2C support

CONFIG_I3C=n
CONFIG_SPI=n
CONFIG_SPMI=n
CONFIG_HSI=n
CONFIG_PPS=y
CONFIG_PPS_DEBUG=n

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_LDISC=y
CONFIG_PPS_CLIENT_PARPORT=y
CONFIG_PPS_CLIENT_GPIO=y

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=n
CONFIG_PTP_1588_CLOCK_KVM=y
CONFIG_PTP_1588_CLOCK_IDT82P33=n
CONFIG_PTP_1588_CLOCK_IDTCM=n
CONFIG_PTP_1588_CLOCK_VMW=n
CONFIG_PTP_1588_CLOCK_OCP=n
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=n
CONFIG_PINCTRL_AMD=n
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_EQUILIBRIUM=y
CONFIG_PINCTRL_MCP23S08=n
CONFIG_PINCTRL_MICROCHIP_SGPIO=y
CONFIG_PINCTRL_OCELOT=n
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_STMFX=n
CONFIG_PINCTRL_SX150X=n
CONFIG_PINCTRL_LOCHNAGAR=n
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L15=y
CONFIG_PINCTRL_CS47L90=y

#
# Intel pinctrl drivers
#
CONFIG_PINCTRL_BAYTRAIL=n
CONFIG_PINCTRL_CHERRYVIEW=n
CONFIG_PINCTRL_LYNXPOINT=n
CONFIG_PINCTRL_ALDERLAKE=n
CONFIG_PINCTRL_BROXTON=n
CONFIG_PINCTRL_CANNONLAKE=n
CONFIG_PINCTRL_CEDARFORK=n
CONFIG_PINCTRL_DENVERTON=n
CONFIG_PINCTRL_ELKHARTLAKE=n
CONFIG_PINCTRL_EMMITSBURG=n
CONFIG_PINCTRL_GEMINILAKE=n
CONFIG_PINCTRL_ICELAKE=n
CONFIG_PINCTRL_JASPERLAKE=n
CONFIG_PINCTRL_LAKEFIELD=n
CONFIG_PINCTRL_LEWISBURG=n
CONFIG_PINCTRL_SUNRISEPOINT=n
CONFIG_PINCTRL_TIGERLAKE=n
# end of Intel pinctrl drivers

#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers

CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=n
CONFIG_GPIO_GENERIC=y

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
CONFIG_GPIO_AMDPT=n
CONFIG_GPIO_CADENCE=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_EXAR=n
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=n
CONFIG_GPIO_GRGPIO=y
CONFIG_GPIO_HLWD=y
CONFIG_GPIO_ICH=y
CONFIG_GPIO_LOGICVC=y
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_MENZ127=y
CONFIG_GPIO_SAMA5D2_PIOBU=y
CONFIG_GPIO_SIFIVE=y
CONFIG_GPIO_SIOX=n
CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_VX855=y
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_AMD_FCH=y
# end of Memory mapped GPIO drivers

#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_F7188X=y
CONFIG_GPIO_IT87=n
CONFIG_GPIO_SCH=n
CONFIG_GPIO_SCH311X=y
CONFIG_GPIO_WINBOND=n
CONFIG_GPIO_WS16C48=y
# end of Port-mapped I/O GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=n
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_GW_PLD=n
CONFIG_GPIO_MAX7300=n
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_MAX732X_IRQ=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=n
CONFIG_GPIO_PCA9570=n
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=n
CONFIG_GPIO_BD71815=n
CONFIG_GPIO_BD71828=y
CONFIG_GPIO_CS5535=y
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_JANZ_TTL=y
CONFIG_GPIO_LP3943=n
CONFIG_GPIO_MADERA=y
CONFIG_GPIO_TC3589X=n
CONFIG_GPIO_TIMBERDALE=y
CONFIG_GPIO_TPS65086=y
CONFIG_GPIO_TPS6586X=n
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=y
CONFIG_GPIO_BT8XX=y
CONFIG_GPIO_ML_IOH=n
CONFIG_GPIO_PCH=y
CONFIG_GPIO_PCI_IDIO_16=y
CONFIG_GPIO_PCIE_IDIO_24=y
CONFIG_GPIO_RDC321X=y
CONFIG_GPIO_SODAVILLE=y
# end of PCI GPIO expanders

#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=y
CONFIG_GPIO_MOCKUP=y
CONFIG_GPIO_VIRTIO=y
CONFIG_GPIO_SIM=n
# end of Virtual GPIO drivers

CONFIG_W1=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_DS1WM=n
CONFIG_W1_MASTER_GPIO=y
CONFIG_W1_MASTER_SGI=y
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=n
CONFIG_W1_SLAVE_DS2405=n
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=n
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2805=y
CONFIG_W1_SLAVE_DS2430=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=n
CONFIG_W1_SLAVE_DS2438=n
CONFIG_W1_SLAVE_DS250X=y
CONFIG_W1_SLAVE_DS2780=n
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_DS28E17=n
# end of 1-wire Slaves

CONFIG_POWER_RESET=n
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=n
CONFIG_POWER_SUPPLY_HWMON=y
CONFIG_PDA_POWER=y
CONFIG_IP5XXX_POWER=n
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
CONFIG_WM8350_POWER=y
CONFIG_TEST_POWER=n
CONFIG_BATTERY_88PM860X=y
CONFIG_CHARGER_ADP5061=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_CW2015=n
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=n
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=n
CONFIG_BATTERY_OLPC=y
CONFIG_BATTERY_SAMSUNG_SDI=n
CONFIG_BATTERY_SBS=n
CONFIG_CHARGER_SBS=y
CONFIG_MANAGER_SBS=y
CONFIG_BATTERY_BQ27XXX=n
CONFIG_BATTERY_DA9052=y
CONFIG_BATTERY_DA9150=n
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_MAX1721X=y
CONFIG_CHARGER_88PM860X=n
CONFIG_CHARGER_PCF50633=y
CONFIG_CHARGER_MAX8903=n
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_GPIO=n
CONFIG_CHARGER_MANAGER=n
CONFIG_CHARGER_LT3651=n
CONFIG_CHARGER_LTC4162L=y
CONFIG_CHARGER_DETECTOR_MAX14656=n
CONFIG_CHARGER_MAX77976=n
CONFIG_CHARGER_MAX8997=y
CONFIG_CHARGER_MT6360=y
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
CONFIG_CHARGER_BQ24257=n
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ2515X=y
CONFIG_CHARGER_BQ25890=n
CONFIG_CHARGER_BQ25980=n
CONFIG_CHARGER_BQ256XX=y
CONFIG_CHARGER_SMB347=y
CONFIG_CHARGER_TPS65090=y
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_GOLDFISH=y
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
CONFIG_CHARGER_UCS1002=y
CONFIG_CHARGER_BD99954=n
CONFIG_BATTERY_UG3105=n
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=n

#
# Native drivers
#
CONFIG_SENSORS_AD7414=n
CONFIG_SENSORS_AD7418=n
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=n
CONFIG_SENSORS_ADM1031=n
CONFIG_SENSORS_ADM1177=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=n
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_AHT10=y
CONFIG_SENSORS_AS370=n
CONFIG_SENSORS_ASC7621=n
CONFIG_SENSORS_AXI_FAN_CONTROL=y
CONFIG_SENSORS_K8TEMP=n
CONFIG_SENSORS_APPLESMC=y
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ASPEED=y
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_CORSAIR_CPRO=y
CONFIG_SENSORS_CORSAIR_PSU=y
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DELL_SMM=y
CONFIG_I8K=y
CONFIG_SENSORS_DA9052_ADC=n
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_I5K_AMB=n
CONFIG_SENSORS_F71805F=n
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_MC13783_ADC=y
CONFIG_SENSORS_FSCHMD=n
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_G762=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_I5500=n
CONFIG_SENSORS_CORETEMP=n
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=n
CONFIG_SENSORS_POWR1220=n
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LOCHNAGAR=y
CONFIG_SENSORS_LTC2945=n
CONFIG_SENSORS_LTC2947=y
CONFIG_SENSORS_LTC2947_I2C=y
CONFIG_SENSORS_LTC2990=y
CONFIG_SENSORS_LTC2992=y
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
CONFIG_SENSORS_LTC4245=n
CONFIG_SENSORS_LTC4260=y
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX127=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=n
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX31730=n
CONFIG_SENSORS_MAX6620=n
CONFIG_SENSORS_MAX6621=y
CONFIG_SENSORS_MAX6639=n
CONFIG_SENSORS_MAX6642=n
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_MAX31790=y
CONFIG_SENSORS_MCP3021=n
CONFIG_SENSORS_MLXREG_FAN=y
CONFIG_SENSORS_TC654=y
CONFIG_SENSORS_TPS23861=y
CONFIG_SENSORS_MR75203=n
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=n
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=n
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LM95234=n
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=n
CONFIG_SENSORS_PC87360=n
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NCT6683=n
CONFIG_SENSORS_NCT6775=n
CONFIG_SENSORS_NCT7802=y
CONFIG_SENSORS_NPCM7XX=n
CONFIG_SENSORS_PCF8591=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=n
CONFIG_SENSORS_ADM1266=y
CONFIG_SENSORS_ADM1275=n
CONFIG_SENSORS_BEL_PFE=y
CONFIG_SENSORS_BPA_RS600=y
CONFIG_SENSORS_DELTA_AHE50DC_FAN=y
CONFIG_SENSORS_FSP_3Y=y
CONFIG_SENSORS_IBM_CFFPS=n
CONFIG_SENSORS_DPS920AB=y
CONFIG_SENSORS_INSPUR_IPSPS=n
CONFIG_SENSORS_IR35221=y
CONFIG_SENSORS_IR36021=y
CONFIG_SENSORS_IR38064=y
CONFIG_SENSORS_IR38064_REGULATOR=n
CONFIG_SENSORS_IRPS5401=n
CONFIG_SENSORS_ISL68137=y
CONFIG_SENSORS_LM25066=n
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=y
CONFIG_SENSORS_MAX15301=y
CONFIG_SENSORS_MAX16064=n
CONFIG_SENSORS_MAX16601=y
CONFIG_SENSORS_MAX20730=y
CONFIG_SENSORS_MAX20751=n
CONFIG_SENSORS_MAX31785=y
CONFIG_SENSORS_MAX34440=y
CONFIG_SENSORS_MAX8688=y
CONFIG_SENSORS_MP2888=y
CONFIG_SENSORS_MP2975=y
CONFIG_SENSORS_MP5023=y
CONFIG_SENSORS_PIM4328=n
CONFIG_SENSORS_PLI1209BC=n
CONFIG_SENSORS_PM6764TR=y
CONFIG_SENSORS_PXE1610=y
CONFIG_SENSORS_Q54SJ108A2=y
CONFIG_SENSORS_STPDDC60=y
CONFIG_SENSORS_TPS40422=n
CONFIG_SENSORS_TPS53679=y
CONFIG_SENSORS_UCD9000=y
CONFIG_SENSORS_UCD9200=n
CONFIG_SENSORS_XDPE122=y
CONFIG_SENSORS_XDPE122_REGULATOR=n
CONFIG_SENSORS_ZL6100=n
CONFIG_SENSORS_PWM_FAN=n
CONFIG_SENSORS_SBTSI=y
CONFIG_SENSORS_SBRMI=y
CONFIG_SENSORS_SHT15=n
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SHT3x=n
CONFIG_SENSORS_SHT4x=n
CONFIG_SENSORS_SHTC1=n
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_SY7636A=n
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=n
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=n
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_STTS751=y
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_AMC6821=y
CONFIG_SENSORS_INA209=y
CONFIG_SENSORS_INA2XX=n
CONFIG_SENSORS_INA238=y
CONFIG_SENSORS_INA3221=n
CONFIG_SENSORS_TC74=n
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP103=y
CONFIG_SENSORS_TMP108=y
CONFIG_SENSORS_TMP401=n
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_TMP464=n
CONFIG_SENSORS_TMP513=y
CONFIG_SENSORS_VIA_CPUTEMP=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=n
CONFIG_SENSORS_VT8231=n
CONFIG_SENSORS_W83773G=n
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
CONFIG_SENSORS_W83795_FANCTRL=n
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_WM8350=y

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=n
CONFIG_SENSORS_ATK0110=n
CONFIG_SENSORS_ASUS_EC=n
CONFIG_THERMAL=y
CONFIG_THERMAL_NETLINK=n
CONFIG_THERMAL_STATISTICS=n
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=n
CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=n
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=n
CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR=y
CONFIG_THERMAL_GOV_FAIR_SHARE=n
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=n
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=n
CONFIG_DEVFREQ_THERMAL=y
CONFIG_THERMAL_EMULATION=n
CONFIG_THERMAL_MMIO=n

#
# Intel thermal drivers
#
CONFIG_INTEL_SOC_DTS_THERMAL=n

#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers

CONFIG_INTEL_PCH_THERMAL=y
CONFIG_INTEL_TCC_COOLING=n
CONFIG_INTEL_MENLOW=n
# end of Intel thermal drivers

CONFIG_WATCHDOG=n
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=n
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=n
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_DRIVER_GPIO=n
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=n
CONFIG_BCMA_HOST_SOC=n
CONFIG_BCMA_DRIVER_PCI=n
CONFIG_BCMA_DRIVER_GMAC_CMN=n
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=n
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=n
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_BD9571MWV=n
CONFIG_MFD_AXP20X_I2C=n
CONFIG_MFD_MADERA=y
CONFIG_MFD_MADERA_I2C=y
CONFIG_MFD_CS47L15=y
CONFIG_MFD_CS47L35=n
CONFIG_MFD_CS47L85=n
CONFIG_MFD_CS47L90=y
CONFIG_MFD_CS47L92=n
CONFIG_PMIC_DA903X=n
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=n
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
CONFIG_MFD_GATEWORKS_GSC=n
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_MP2629=y
CONFIG_MFD_HI6421_PMIC=n
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=y
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
CONFIG_INTEL_SOC_PMIC=n
CONFIG_INTEL_SOC_PMIC_CHTWC=n
CONFIG_INTEL_SOC_PMIC_CHTDC_TI=n
CONFIG_INTEL_SOC_PMIC_MRFLD=n
CONFIG_MFD_INTEL_LPSS_ACPI=n
CONFIG_MFD_INTEL_LPSS_PCI=n
CONFIG_MFD_INTEL_PMC_BXT=n
CONFIG_MFD_IQS62X=y
CONFIG_MFD_JANZ_CMODIO=y
CONFIG_MFD_KEMPLD=n
CONFIG_MFD_88PM800=n
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=n
CONFIG_MFD_MAX77620=n
CONFIG_MFD_MAX77650=n
CONFIG_MFD_MAX77686=n
CONFIG_MFD_MAX77693=n
CONFIG_MFD_MAX77714=n
CONFIG_MFD_MAX77843=n
CONFIG_MFD_MAX8907=n
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=n
CONFIG_MFD_MT6360=y
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=n
CONFIG_MFD_NTXEC=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=n
CONFIG_MFD_RDC321X=y
CONFIG_MFD_RT4831=n
CONFIG_MFD_RT5033=y
CONFIG_MFD_RC5T583=n
CONFIG_MFD_RK808=n
CONFIG_MFD_RN5T618=y
CONFIG_MFD_SEC_CORE=n
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SIMPLE_MFD_I2C=n
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=n
CONFIG_MFD_SKY81452=y
CONFIG_MFD_STMPE=n
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=n
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=n
CONFIG_MFD_TI_LMU=y
CONFIG_MFD_PALMAS=n
CONFIG_TPS6105X=n
CONFIG_TPS65010=n
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=n
CONFIG_MFD_TI_LP873X=n
CONFIG_MFD_TI_LP87565=n
CONFIG_MFD_TPS65218=n
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=n
CONFIG_MFD_TPS65912_I2C=n
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=n
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=n
CONFIG_MFD_TIMBERDALE=y
CONFIG_MFD_TC3589X=y
CONFIG_MFD_TQMX86=n
CONFIG_MFD_VX855=y
CONFIG_MFD_LOCHNAGAR=y
CONFIG_MFD_ARIZONA_I2C=n
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=n
CONFIG_MFD_ROHM_BD718XX=n
CONFIG_MFD_ROHM_BD71828=y
CONFIG_MFD_ROHM_BD957XMUF=y
CONFIG_MFD_STPMIC1=y
CONFIG_MFD_STMFX=n
CONFIG_MFD_ATC260X=y
CONFIG_MFD_ATC260X_I2C=y
CONFIG_MFD_QCOM_PM8008=y
CONFIG_RAVE_SP_CORE=n
CONFIG_MFD_RSMU_I2C=y
# end of Multifunction device drivers

CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=n
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=y
CONFIG_REGULATOR_88PM8607=y
CONFIG_REGULATOR_ACT8865=n
CONFIG_REGULATOR_ACT8945A=y
CONFIG_REGULATOR_AD5398=n
CONFIG_REGULATOR_ARIZONA_LDO1=n
CONFIG_REGULATOR_ARIZONA_MICSUPP=n
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_ATC260X=n
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_BD71815=y
CONFIG_REGULATOR_BD71828=y
CONFIG_REGULATOR_BD957XMUF=n
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_DA9055=y
CONFIG_REGULATOR_DA9063=n
CONFIG_REGULATOR_DA9121=y
CONFIG_REGULATOR_DA9210=n
CONFIG_REGULATOR_DA9211=n
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_FAN53880=n
CONFIG_REGULATOR_GPIO=n
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=n
CONFIG_REGULATOR_LM363X=y
CONFIG_REGULATOR_LOCHNAGAR=n
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LTC3589=n
CONFIG_REGULATOR_LTC3676=n
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX8649=n
CONFIG_REGULATOR_MAX8660=n
CONFIG_REGULATOR_MAX8893=y
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_MAX8952=n
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX20086=n
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MC13783=n
CONFIG_REGULATOR_MC13892=n
CONFIG_REGULATOR_MCP16502=y
CONFIG_REGULATOR_MP5416=n
CONFIG_REGULATOR_MP8859=n
CONFIG_REGULATOR_MP886X=y
CONFIG_REGULATOR_MPQ7920=y
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6323=n
CONFIG_REGULATOR_MT6358=n
CONFIG_REGULATOR_MT6359=y
CONFIG_REGULATOR_MT6360=y
CONFIG_REGULATOR_MT6397=y
CONFIG_REGULATOR_PCA9450=y
CONFIG_REGULATOR_PCF50633=n
CONFIG_REGULATOR_PF8X00=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=n
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=y
CONFIG_REGULATOR_RN5T618=y
CONFIG_REGULATOR_ROHM=y
CONFIG_REGULATOR_RT4801=y
CONFIG_REGULATOR_RT5033=y
CONFIG_REGULATOR_RT5190A=n
CONFIG_REGULATOR_RT6160=n
CONFIG_REGULATOR_RT6245=n
CONFIG_REGULATOR_RTQ2134=y
CONFIG_REGULATOR_RTMV20=y
CONFIG_REGULATOR_RTQ6752=n
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_SLG51000=y
CONFIG_REGULATOR_STPMIC1=y
CONFIG_REGULATOR_SY7636A=n
CONFIG_REGULATOR_SY8106A=y
CONFIG_REGULATOR_SY8824X=n
CONFIG_REGULATOR_SY8827N=y
CONFIG_REGULATOR_TPS51632=n
CONFIG_REGULATOR_TPS62360=n
CONFIG_REGULATOR_TPS6286X=n
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=n
CONFIG_REGULATOR_TPS65086=y
CONFIG_REGULATOR_TPS65090=n
CONFIG_REGULATOR_TPS65132=y
CONFIG_REGULATOR_TPS6586X=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_VCTRL=n
CONFIG_REGULATOR_WM831X=n
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8400=n
CONFIG_RC_CORE=y
CONFIG_BPF_LIRC_MODE2=y
CONFIG_LIRC=y
CONFIG_RC_MAP=y
CONFIG_RC_DECODERS=y
CONFIG_IR_IMON_DECODER=y
CONFIG_IR_JVC_DECODER=n
CONFIG_IR_MCE_KBD_DECODER=n
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_RCMM_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=n
CONFIG_IR_SONY_DECODER=n
CONFIG_IR_XMP_DECODER=y
CONFIG_RC_DEVICES=y
CONFIG_IR_ENE=n
CONFIG_IR_FINTEK=n
CONFIG_IR_GPIO_CIR=y
CONFIG_IR_GPIO_TX=y
CONFIG_IR_HIX5HD2=n
CONFIG_IR_ITE_CIR=n
CONFIG_IR_NUVOTON=n
CONFIG_IR_PWM_TX=y
CONFIG_IR_SERIAL=y
CONFIG_IR_SERIAL_TRANSMITTER=y
CONFIG_IR_WINBOND_CIR=n
CONFIG_RC_LOOPBACK=n
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y

#
# CEC support
#
CONFIG_MEDIA_CEC_RC=n
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=y
CONFIG_USB_PULSE8_CEC=n
CONFIG_USB_RAINSHADOW_CEC=n
# end of CEC support

CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_SUPPORT_FILTER=n
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y

#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types

#
# Media core support
#
CONFIG_VIDEO_DEV=n
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=y
# end of Media core support

#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
# end of Media controller options

#
# Digital TV options
#
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_DEMUX_SECTION_LOSS_LOG=y
CONFIG_DVB_ULE_DEBUG=n
# end of Digital TV options

#
# Media drivers
#

#
# Media drivers
#
CONFIG_MEDIA_PCI_SUPPORT=n
CONFIG_MEDIA_PLATFORM_DRIVERS=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SDR_PLATFORM_DRIVERS=n
CONFIG_DVB_PLATFORM_DRIVERS=y

#
# Allegro DVT drivers
#

#
# Amlogic drivers
#

#
# Amphion drivers
#

#
# Aspeed drivers
#

#
# Atmel drivers
#

#
# Cadence drivers
#

#
# Chips&Media drivers
#

#
# Intel drivers
#

#
# Marvell drivers
#

#
# Mediatek drivers
#

#
# NVidia drivers
#

#
# NXP drivers
#
CONFIG_VIDEO_IMX_MIPI_CSIS=n

#
# Qualcomm drivers
#

#
# Renesas drivers
#

#
# Rockchip drivers
#

#
# Samsung drivers
#

#
# STMicroelectronics drivers
#

#
# Texas Instruments drivers
#

#
# VIA drivers
#

#
# Xilinx drivers
#

#
# MMC/SDIO DVB adapters
#
CONFIG_SMS_SDIO_DRV=n
CONFIG_DVB_TEST_DRIVERS=n

#
# FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=y
CONFIG_DVB_FIREDTV_INPUT=y
# end of Media drivers

#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=y

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_FC0011=y
CONFIG_MEDIA_TUNER_FC0012=y
CONFIG_MEDIA_TUNER_FC0013=n
CONFIG_MEDIA_TUNER_IT913X=n
CONFIG_MEDIA_TUNER_M88RS6000T=n
CONFIG_MEDIA_TUNER_MAX2165=n
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2063=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_MT2266=n
CONFIG_MEDIA_TUNER_MXL301RF=n
CONFIG_MEDIA_TUNER_MXL5005S=y
CONFIG_MEDIA_TUNER_MXL5007T=y
CONFIG_MEDIA_TUNER_QM1D1B0004=y
CONFIG_MEDIA_TUNER_QM1D1C0042=y
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_R820T=y
CONFIG_MEDIA_TUNER_SI2157=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA18212=y
CONFIG_MEDIA_TUNER_TDA18218=y
CONFIG_MEDIA_TUNER_TDA18250=n
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_TUA9001=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_XC5000=y
# end of Customize TV tuners

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_M88DS3103=y
CONFIG_DVB_MXL5XX=y
CONFIG_DVB_STB0899=y
CONFIG_DVB_STB6100=y
CONFIG_DVB_STV090x=y
CONFIG_DVB_STV0910=y
CONFIG_DVB_STV6110x=y
CONFIG_DVB_STV6111=y

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=y
CONFIG_DVB_MN88472=n
CONFIG_DVB_MN88473=n
CONFIG_DVB_SI2165=y
CONFIG_DVB_TDA18271C2DD=y

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=y
CONFIG_DVB_CX24116=y
CONFIG_DVB_CX24117=y
CONFIG_DVB_CX24120=y
CONFIG_DVB_CX24123=y
CONFIG_DVB_DS3000=n
CONFIG_DVB_MB86A16=y
CONFIG_DVB_MT312=y
CONFIG_DVB_S5H1420=y
CONFIG_DVB_SI21XX=n
CONFIG_DVB_STB6000=n
CONFIG_DVB_STV0288=y
CONFIG_DVB_STV0299=y
CONFIG_DVB_STV0900=y
CONFIG_DVB_STV6110=n
CONFIG_DVB_TDA10071=n
CONFIG_DVB_TDA10086=y
CONFIG_DVB_TDA8083=n
CONFIG_DVB_TDA8261=n
CONFIG_DVB_TDA826X=y
CONFIG_DVB_TS2020=y
CONFIG_DVB_TUA6100=n
CONFIG_DVB_TUNER_CX24113=y
CONFIG_DVB_TUNER_ITD1000=n
CONFIG_DVB_VES1X93=n
CONFIG_DVB_ZL10036=n
CONFIG_DVB_ZL10039=n

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_AF9013=y
CONFIG_DVB_CX22700=n
CONFIG_DVB_CX22702=n
CONFIG_DVB_CXD2820R=n
CONFIG_DVB_CXD2841ER=n
CONFIG_DVB_DIB3000MB=y
CONFIG_DVB_DIB3000MC=n
CONFIG_DVB_DIB7000M=y
CONFIG_DVB_DIB7000P=y
CONFIG_DVB_DIB9000=y
CONFIG_DVB_DRXD=y
CONFIG_DVB_EC100=n
CONFIG_DVB_L64781=y
CONFIG_DVB_MT352=y
CONFIG_DVB_NXT6000=y
CONFIG_DVB_RTL2830=y
CONFIG_DVB_RTL2832=y
CONFIG_DVB_S5H1432=y
CONFIG_DVB_SI2168=y
CONFIG_DVB_SP887X=y
CONFIG_DVB_STV0367=y
CONFIG_DVB_TDA10048=n
CONFIG_DVB_TDA1004X=n
CONFIG_DVB_ZD1301_DEMOD=y
CONFIG_DVB_ZL10353=y

#
# DVB-C (cable) frontends
#
CONFIG_DVB_STV0297=y
CONFIG_DVB_TDA10021=y
CONFIG_DVB_TDA10023=n
CONFIG_DVB_VES1820=y

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_AU8522=y
CONFIG_DVB_AU8522_DTV=y
CONFIG_DVB_BCM3510=y
CONFIG_DVB_LG2160=y
CONFIG_DVB_LGDT3305=y
CONFIG_DVB_LGDT3306A=n
CONFIG_DVB_LGDT330X=y
CONFIG_DVB_MXL692=n
CONFIG_DVB_NXT200X=y
CONFIG_DVB_OR51132=y
CONFIG_DVB_OR51211=y
CONFIG_DVB_S5H1409=y
CONFIG_DVB_S5H1411=n

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_DIB8000=y
CONFIG_DVB_MB86A20S=y
CONFIG_DVB_S921=n

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_MN88443X=n
CONFIG_DVB_TC90522=y

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
CONFIG_DVB_TUNER_DIB0070=y
CONFIG_DVB_TUNER_DIB0090=n

#
# SEC control devices for DVB-S
#
CONFIG_DVB_A8293=n
CONFIG_DVB_AF9033=n
CONFIG_DVB_ASCOT2E=n
CONFIG_DVB_ATBM8830=y
CONFIG_DVB_HELENE=y
CONFIG_DVB_HORUS3A=n
CONFIG_DVB_ISL6405=n
CONFIG_DVB_ISL6421=y
CONFIG_DVB_ISL6423=y
CONFIG_DVB_IX2505V=y
CONFIG_DVB_LGS8GL5=y
CONFIG_DVB_LGS8GXX=n
CONFIG_DVB_LNBH25=n
CONFIG_DVB_LNBH29=y
CONFIG_DVB_LNBP21=n
CONFIG_DVB_LNBP22=n
CONFIG_DVB_M88RS2000=n
CONFIG_DVB_TDA665x=n
CONFIG_DVB_DRX39XYJ=y

#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=y
CONFIG_DVB_SP2=y
# end of Customise DVB Frontends

#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=y
# end of Media ancillary drivers

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=n
CONFIG_AGP_ATI=y
CONFIG_AGP_AMD=y
CONFIG_AGP_INTEL=n
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=n
CONFIG_AGP_VIA=n
CONFIG_AGP_EFFICEON=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_SWITCHEROO=n
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_BUS=y
CONFIG_DRM_DP_AUX_CHARDEV=y
CONFIG_DRM_DEBUG_MM=y
CONFIG_DRM_DEBUG_SELFTEST=n
CONFIG_DRM_DP_HELPER=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS=y
CONFIG_DRM_DEBUG_MODESET_LOCK=n
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM=n
CONFIG_DRM_LOAD_EDID_FIRMWARE=n
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_TTM=y
CONFIG_DRM_BUDDY=y
CONFIG_DRM_VRAM_HELPER=y
CONFIG_DRM_TTM_HELPER=y
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_SCHED=y

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
CONFIG_DRM_I2C_SIL164=y
CONFIG_DRM_I2C_NXP_TDA998X=y
CONFIG_DRM_I2C_NXP_TDA9950=y
# end of I2C encoder or helper chips

#
# ARM devices
#
CONFIG_DRM_KOMEDA=y
# end of ARM devices

CONFIG_DRM_RADEON=n
CONFIG_DRM_AMDGPU=n
CONFIG_DRM_NOUVEAU=n
CONFIG_DRM_I915=y
CONFIG_DRM_I915_FORCE_PROBE=""
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=n
CONFIG_DRM_I915_USERPTR=n
CONFIG_DRM_I915_PXP=n

#
# drm/i915 Debugging
#
CONFIG_DRM_I915_WERROR=y
CONFIG_DRM_I915_DEBUG=n
CONFIG_DRM_I915_DEBUG_MMIO=y
CONFIG_DRM_I915_DEBUG_GEM=y
CONFIG_DRM_I915_DEBUG_GEM_ONCE=y
CONFIG_DRM_I915_ERRLOG_GEM=y
CONFIG_DRM_I915_TRACE_GEM=y
CONFIG_DRM_I915_TRACE_GTT=y
CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS=y
CONFIG_DRM_I915_SW_FENCE_CHECK_DAG=y
CONFIG_DRM_I915_DEBUG_GUC=y
CONFIG_DRM_I915_SELFTEST=n
CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS=y
CONFIG_DRM_I915_DEBUG_VBLANK_EVADE=n
CONFIG_DRM_I915_DEBUG_RUNTIME_PM=y
# end of drm/i915 Debugging

#
# drm/i915 Profile Guided Optimisation
#
CONFIG_DRM_I915_REQUEST_TIMEOUT=20000
CONFIG_DRM_I915_FENCE_TIMEOUT=10000
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500
CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000
CONFIG_DRM_I915_STOP_TIMEOUT=100
CONFIG_DRM_I915_TIMESLICE_DURATION=1
# end of drm/i915 Profile Guided Optimisation

CONFIG_DRM_VGEM=y
CONFIG_DRM_VKMS=y
CONFIG_DRM_VMWGFX=y
CONFIG_DRM_VMWGFX_FBCON=n
CONFIG_DRM_VMWGFX_MKSSTATS=y
CONFIG_DRM_GMA500=y
CONFIG_DRM_AST=y
CONFIG_DRM_MGAG200=y
CONFIG_DRM_RCAR_DW_HDMI=n
CONFIG_DRM_RCAR_USE_LVDS=y
CONFIG_DRM_RCAR_MIPI_DSI=y
CONFIG_DRM_QXL=n
CONFIG_DRM_VIRTIO_GPU=n
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_PANEL_ARM_VERSATILE=n
CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596=y
CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0=y
CONFIG_DRM_PANEL_BOE_HIMAX8279D=n
CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=y
CONFIG_DRM_PANEL_DSI_CM=y
CONFIG_DRM_PANEL_LVDS=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_PANEL_EDP=n
CONFIG_DRM_PANEL_ELIDA_KD35T133=y
CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02=n
CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D=n
CONFIG_DRM_PANEL_ILITEK_ILI9881C=y
CONFIG_DRM_PANEL_INNOLUX_P079ZCA=y
CONFIG_DRM_PANEL_JDI_LT070ME05000=y
CONFIG_DRM_PANEL_JDI_R63452=n
CONFIG_DRM_PANEL_KHADAS_TS050=y
CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04=n
CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W=y
CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=y
CONFIG_DRM_PANEL_NOVATEK_NT35510=y
CONFIG_DRM_PANEL_NOVATEK_NT35560=n
CONFIG_DRM_PANEL_NOVATEK_NT35950=y
CONFIG_DRM_PANEL_NOVATEK_NT36672A=n
CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=y
CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=n
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=y
CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=y
CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=y
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=n
CONFIG_DRM_PANEL_RAYDIUM_RM67191=n
CONFIG_DRM_PANEL_RAYDIUM_RM68200=y
CONFIG_DRM_PANEL_RONBO_RB070D30=y
CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20=y
CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=n
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI=n
CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01=y
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
CONFIG_DRM_PANEL_SAMSUNG_SOFEF00=y
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=y
CONFIG_DRM_PANEL_SHARP_LS037V7DW01=n
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=y
CONFIG_DRM_PANEL_SHARP_LS060T1SX01=n
CONFIG_DRM_PANEL_SITRONIX_ST7701=y
CONFIG_DRM_PANEL_SITRONIX_ST7703=y
CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521=n
CONFIG_DRM_PANEL_TDO_TL070WSH30=y
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=y
CONFIG_DRM_PANEL_VISIONOX_RM69299=y
CONFIG_DRM_PANEL_XINPENG_XPP055C272=y
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
CONFIG_DRM_CDNS_DSI=y
CONFIG_DRM_CHIPONE_ICN6211=y
CONFIG_DRM_CHRONTEL_CH7033=n
CONFIG_DRM_DISPLAY_CONNECTOR=y
CONFIG_DRM_ITE_IT6505=n
CONFIG_DRM_LONTIUM_LT8912B=y
CONFIG_DRM_LONTIUM_LT9611=y
CONFIG_DRM_LONTIUM_LT9611UXC=n
CONFIG_DRM_ITE_IT66121=y
CONFIG_DRM_LVDS_CODEC=y
CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW=y
CONFIG_DRM_NWL_MIPI_DSI=y
CONFIG_DRM_NXP_PTN3460=n
CONFIG_DRM_PARADE_PS8622=n
CONFIG_DRM_PARADE_PS8640=n
CONFIG_DRM_SIL_SII8620=y
CONFIG_DRM_SII902X=n
CONFIG_DRM_SII9234=y
CONFIG_DRM_SIMPLE_BRIDGE=n
CONFIG_DRM_THINE_THC63LVD1024=y
CONFIG_DRM_TOSHIBA_TC358762=n
CONFIG_DRM_TOSHIBA_TC358764=y
CONFIG_DRM_TOSHIBA_TC358767=n
CONFIG_DRM_TOSHIBA_TC358768=y
CONFIG_DRM_TOSHIBA_TC358775=y
CONFIG_DRM_TI_TFP410=y
CONFIG_DRM_TI_SN65DSI83=n
CONFIG_DRM_TI_SN65DSI86=n
CONFIG_DRM_TI_TPD12S015=y
CONFIG_DRM_ANALOGIX_ANX6345=n
CONFIG_DRM_ANALOGIX_ANX78XX=y
CONFIG_DRM_ANALOGIX_DP=y
CONFIG_DRM_ANALOGIX_ANX7625=y
CONFIG_DRM_I2C_ADV7511=n
CONFIG_DRM_CDNS_MHDP8546=n
# end of Display Interface Bridges

CONFIG_DRM_ETNAVIV=y
CONFIG_DRM_ETNAVIV_THERMAL=y
CONFIG_DRM_MXS=y
CONFIG_DRM_MXSFB=y
CONFIG_DRM_ARCPGU=n
CONFIG_DRM_BOCHS=y
CONFIG_DRM_CIRRUS_QEMU=n
CONFIG_DRM_SIMPLEDRM=y
CONFIG_DRM_VBOXVIDEO=y
CONFIG_DRM_SSD130X=n
CONFIG_DRM_LEGACY=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
CONFIG_DRM_MGA=y
CONFIG_DRM_SIS=n
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_NOMODESET=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=n
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=n
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=n
CONFIG_FB_CYBER2000=n
CONFIG_FB_ARC=y
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=n
CONFIG_FB_VESA=y
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_OPENCORES=y
CONFIG_FB_S1D13XXX=n
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=n
CONFIG_FB_NVIDIA_DEBUG=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I740=y
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
CONFIG_FB_MATROX=n
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=n
CONFIG_FB_RADEON_BACKLIGHT=y
CONFIG_FB_RADEON_DEBUG=y
CONFIG_FB_ATY128=n
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=n
CONFIG_FB_ATY_BACKLIGHT=n
CONFIG_FB_S3=y
CONFIG_FB_S3_DDC=n
CONFIG_FB_SAVAGE=n
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=n
CONFIG_FB_VIA=y
CONFIG_FB_VIA_DIRECT_PROCFS=n
CONFIG_FB_VIA_X_COMPATIBILITY=y
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=n
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=n
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=n
CONFIG_FB_ARK=y
CONFIG_FB_PM3=n
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=n
CONFIG_CARMINE_DRAM_CUSTOM=y
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=n
CONFIG_FB_GEODE_GX=y
CONFIG_FB_GEODE_GX1=y
CONFIG_FB_SM501=y
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_GOLDFISH=n
CONFIG_FB_VIRTUAL=y
CONFIG_FB_METRONOME=n
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=n
CONFIG_FB_SSD1307=y
CONFIG_FB_SM712=y
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=y
CONFIG_BACKLIGHT_CARILLO_RANCH=n
CONFIG_BACKLIGHT_PWM=n
CONFIG_BACKLIGHT_DA9052=n
CONFIG_BACKLIGHT_MAX8925=y
CONFIG_BACKLIGHT_APPLE=n
CONFIG_BACKLIGHT_QCOM_WLED=y
CONFIG_BACKLIGHT_SAHARA=n
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=n
CONFIG_BACKLIGHT_PCF50633=n
CONFIG_BACKLIGHT_LM3630A=y
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
CONFIG_BACKLIGHT_PANDORA=y
CONFIG_BACKLIGHT_SKY81452=y
CONFIG_BACKLIGHT_AS3711=n
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=n
CONFIG_BACKLIGHT_ARCXCNN=y
CONFIG_BACKLIGHT_LED=y
# end of Backlight & LCD device support

CONFIG_VGASTATE=y
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
CONFIG_LOGO=n
# end of Graphics support

CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=n
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_DYNAMIC_MINORS=n
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=n
CONFIG_SND_DEBUG=n
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_SEQUENCER=n
CONFIG_SND_MPU401_UART=y
CONFIG_SND_VX_LIB=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=y
CONFIG_SND_ALOOP=n
CONFIG_SND_MTPAV=n
CONFIG_SND_MTS64=y
CONFIG_SND_SERIAL_U16550=n
CONFIG_SND_MPU401=y
CONFIG_SND_PORTMAN2X4=n
CONFIG_SND_PCI=n

#
# HD-Audio
#
# end of HD-Audio

CONFIG_SND_HDA_PREALLOC_SIZE=0
CONFIG_SND_INTEL_NHLT=y
CONFIG_SND_INTEL_DSP_CONFIG=y
CONFIG_SND_INTEL_SOUNDWIRE_ACPI=y
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=y
CONFIG_SND_DICE=y
CONFIG_SND_OXFW=y
CONFIG_SND_ISIGHT=y
CONFIG_SND_FIREWORKS=y
CONFIG_SND_BEBOB=y
CONFIG_SND_FIREWIRE_DIGI00X=y
CONFIG_SND_FIREWIRE_TASCAM=y
CONFIG_SND_FIREWIRE_MOTU=y
CONFIG_SND_FIREFACE=n
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=y
CONFIG_SND_PDAUDIOCF=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_ACPI=y
CONFIG_SND_SOC_ADI=n
CONFIG_SND_SOC_AMD_ACP=n
CONFIG_SND_SOC_AMD_ACP3x=n
CONFIG_SND_SOC_AMD_RENOIR=n
CONFIG_SND_SOC_AMD_ACP5x=y
CONFIG_SND_SOC_AMD_ACP6x=y
CONFIG_SND_SOC_AMD_YC_MACH=y
CONFIG_SND_AMD_ACP_CONFIG=y
CONFIG_SND_SOC_AMD_ACP_COMMON=n
CONFIG_SND_ATMEL_SOC=y
CONFIG_SND_SOC_MIKROE_PROTO=n
CONFIG_SND_BCM63XX_I2S_WHISTLER=y
CONFIG_SND_DESIGNWARE_I2S=y
CONFIG_SND_DESIGNWARE_PCM=n

#
# SoC Audio for Freescale CPUs
#

#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=n
CONFIG_SND_SOC_FSL_SAI=n
CONFIG_SND_SOC_FSL_AUDMIX=n
CONFIG_SND_SOC_FSL_SSI=y
CONFIG_SND_SOC_FSL_SPDIF=y
CONFIG_SND_SOC_FSL_ESAI=y
CONFIG_SND_SOC_FSL_MICFIL=y
CONFIG_SND_SOC_FSL_XCVR=y
CONFIG_SND_SOC_FSL_RPMSG=n
CONFIG_SND_SOC_IMX_AUDMUX=y
# end of SoC Audio for Freescale CPUs

CONFIG_SND_I2S_HI6210_I2S=n
CONFIG_SND_SOC_IMG=n
CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
CONFIG_SND_SOC_INTEL_CATPT=n
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=y
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI=n
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=y
CONFIG_SND_SOC_INTEL_SKYLAKE=n
CONFIG_SND_SOC_INTEL_SKL=n
CONFIG_SND_SOC_INTEL_APL=n
CONFIG_SND_SOC_INTEL_KBL=n
CONFIG_SND_SOC_INTEL_GLK=n
CONFIG_SND_SOC_INTEL_CNL=n
CONFIG_SND_SOC_INTEL_CFL=n
CONFIG_SND_SOC_INTEL_CML_H=n
CONFIG_SND_SOC_INTEL_CML_LP=n
CONFIG_SND_SOC_ACPI_INTEL_MATCH=y
CONFIG_SND_SOC_INTEL_AVS=n
CONFIG_SND_SOC_INTEL_MACH=y
CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES=y
CONFIG_SND_SOC_MTK_BTCVSD=y
CONFIG_SND_SOC_SOF_TOPLEVEL=y
CONFIG_SND_SOC_SOF_PCI=y
CONFIG_SND_SOC_SOF_ACPI=n
CONFIG_SND_SOC_SOF_OF=y
CONFIG_SND_SOC_SOF_AMD_TOPLEVEL=n
CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL=n

#
# STMicroelectronics STM32 SOC audio support
#
# end of STMicroelectronics STM32 SOC audio support

CONFIG_SND_SOC_XILINX_I2S=n
CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=y
CONFIG_SND_SOC_XILINX_SPDIF=n
CONFIG_SND_SOC_XTFPGA_I2S=y
CONFIG_SND_SOC_I2C_AND_SPI=y

#
# CODEC drivers
#
CONFIG_SND_SOC_WM_ADSP=y
CONFIG_SND_SOC_AC97_CODEC=n
CONFIG_SND_SOC_ADAU_UTILS=y
CONFIG_SND_SOC_ADAU1372=y
CONFIG_SND_SOC_ADAU1372_I2C=y
CONFIG_SND_SOC_ADAU1701=y
CONFIG_SND_SOC_ADAU1761_I2C=n
CONFIG_SND_SOC_ADAU7002=n
CONFIG_SND_SOC_ADAU7118=y
CONFIG_SND_SOC_ADAU7118_HW=y
CONFIG_SND_SOC_ADAU7118_I2C=y
CONFIG_SND_SOC_AK4118=y
CONFIG_SND_SOC_AK4375=y
CONFIG_SND_SOC_AK4458=y
CONFIG_SND_SOC_AK4554=n
CONFIG_SND_SOC_AK4613=y
CONFIG_SND_SOC_AK4642=y
CONFIG_SND_SOC_AK5386=y
CONFIG_SND_SOC_AK5558=n
CONFIG_SND_SOC_ALC5623=y
CONFIG_SND_SOC_AW8738=n
CONFIG_SND_SOC_BD28623=y
CONFIG_SND_SOC_BT_SCO=y
CONFIG_SND_SOC_CS35L32=y
CONFIG_SND_SOC_CS35L33=n
CONFIG_SND_SOC_CS35L34=y
CONFIG_SND_SOC_CS35L35=y
CONFIG_SND_SOC_CS35L36=n
CONFIG_SND_SOC_CS35L41_LIB=y
CONFIG_SND_SOC_CS35L41=y
CONFIG_SND_SOC_CS35L41_I2C=y
CONFIG_SND_SOC_CS42L42=y
CONFIG_SND_SOC_CS42L51_I2C=n
CONFIG_SND_SOC_CS42L52=y
CONFIG_SND_SOC_CS42L56=y
CONFIG_SND_SOC_CS42L73=y
CONFIG_SND_SOC_CS4234=y
CONFIG_SND_SOC_CS4265=n
CONFIG_SND_SOC_CS4270=y
CONFIG_SND_SOC_CS4271=y
CONFIG_SND_SOC_CS4271_I2C=y
CONFIG_SND_SOC_CS42XX8=y
CONFIG_SND_SOC_CS42XX8_I2C=y
CONFIG_SND_SOC_CS43130=y
CONFIG_SND_SOC_CS4341=y
CONFIG_SND_SOC_CS4349=n
CONFIG_SND_SOC_CS53L30=y
CONFIG_SND_SOC_CX2072X=n
CONFIG_SND_SOC_DA7213=y
CONFIG_SND_SOC_DMIC=y
CONFIG_SND_SOC_HDMI_CODEC=y
CONFIG_SND_SOC_ES7134=y
CONFIG_SND_SOC_ES7241=y
CONFIG_SND_SOC_ES8316=y
CONFIG_SND_SOC_ES8328_I2C=n
CONFIG_SND_SOC_GTM601=n
CONFIG_SND_SOC_ICS43432=y
CONFIG_SND_SOC_INNO_RK3036=y
CONFIG_SND_SOC_LOCHNAGAR_SC=y
CONFIG_SND_SOC_MAX98088=n
CONFIG_SND_SOC_MAX98357A=y
CONFIG_SND_SOC_MAX98504=y
CONFIG_SND_SOC_MAX9867=y
CONFIG_SND_SOC_MAX98927=n
CONFIG_SND_SOC_MAX98520=y
CONFIG_SND_SOC_MAX98373=y
CONFIG_SND_SOC_MAX98373_I2C=y
CONFIG_SND_SOC_MAX98373_SDW=y
CONFIG_SND_SOC_MAX98390=y
CONFIG_SND_SOC_MAX9860=n
CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=n
CONFIG_SND_SOC_PCM1681=y
CONFIG_SND_SOC_PCM1789=y
CONFIG_SND_SOC_PCM1789_I2C=y
CONFIG_SND_SOC_PCM179X=y
CONFIG_SND_SOC_PCM179X_I2C=y
CONFIG_SND_SOC_PCM186X=y
CONFIG_SND_SOC_PCM186X_I2C=y
CONFIG_SND_SOC_PCM3060=y
CONFIG_SND_SOC_PCM3060_I2C=y
CONFIG_SND_SOC_PCM3168A_I2C=n
CONFIG_SND_SOC_PCM5102A=y
CONFIG_SND_SOC_PCM512x=y
CONFIG_SND_SOC_PCM512x_I2C=y
CONFIG_SND_SOC_RK3328=y
CONFIG_SND_SOC_RL6231=y
CONFIG_SND_SOC_RT1308_SDW=y
CONFIG_SND_SOC_RT1316_SDW=n
CONFIG_SND_SOC_RT5616=y
CONFIG_SND_SOC_RT5631=y
CONFIG_SND_SOC_RT5640=y
CONFIG_SND_SOC_RT5659=y
CONFIG_SND_SOC_RT5682=y
CONFIG_SND_SOC_RT5682_SDW=y
CONFIG_SND_SOC_RT700=y
CONFIG_SND_SOC_RT700_SDW=y
CONFIG_SND_SOC_RT711=y
CONFIG_SND_SOC_RT711_SDW=y
CONFIG_SND_SOC_RT711_SDCA_SDW=y
CONFIG_SND_SOC_RT715_SDW=n
CONFIG_SND_SOC_RT715_SDCA_SDW=n
CONFIG_SND_SOC_RT9120=y
CONFIG_SND_SOC_SDW_MOCKUP=y
CONFIG_SND_SOC_SGTL5000=n
CONFIG_SND_SOC_SIGMADSP=y
CONFIG_SND_SOC_SIGMADSP_I2C=y
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=n
CONFIG_SND_SOC_SIMPLE_MUX=y
CONFIG_SND_SOC_SPDIF=y
CONFIG_SND_SOC_SSM2305=y
CONFIG_SND_SOC_SSM2518=y
CONFIG_SND_SOC_SSM2602=y
CONFIG_SND_SOC_SSM2602_I2C=y
CONFIG_SND_SOC_SSM4567=y
CONFIG_SND_SOC_STA32X=y
CONFIG_SND_SOC_STA350=y
CONFIG_SND_SOC_STI_SAS=y
CONFIG_SND_SOC_TAS2552=n
CONFIG_SND_SOC_TAS2562=y
CONFIG_SND_SOC_TAS2764=y
CONFIG_SND_SOC_TAS2770=y
CONFIG_SND_SOC_TAS5086=n
CONFIG_SND_SOC_TAS571X=n
CONFIG_SND_SOC_TAS5720=y
CONFIG_SND_SOC_TAS5805M=n
CONFIG_SND_SOC_TAS6424=y
CONFIG_SND_SOC_TDA7419=y
CONFIG_SND_SOC_TFA9879=y
CONFIG_SND_SOC_TFA989X=y
CONFIG_SND_SOC_TLV320ADC3XXX=y
CONFIG_SND_SOC_TLV320AIC23_I2C=n
CONFIG_SND_SOC_TLV320AIC31XX=y
CONFIG_SND_SOC_TLV320AIC32X4=y
CONFIG_SND_SOC_TLV320AIC32X4_I2C=y
CONFIG_SND_SOC_TLV320AIC3X=y
CONFIG_SND_SOC_TLV320AIC3X_I2C=y
CONFIG_SND_SOC_TLV320ADCX140=n
CONFIG_SND_SOC_TS3A227E=y
CONFIG_SND_SOC_TSCS42XX=n
CONFIG_SND_SOC_TSCS454=y
CONFIG_SND_SOC_UDA1334=y
CONFIG_SND_SOC_WCD938X_SDW=n
CONFIG_SND_SOC_WM8510=n
CONFIG_SND_SOC_WM8523=y
CONFIG_SND_SOC_WM8524=y
CONFIG_SND_SOC_WM8580=y
CONFIG_SND_SOC_WM8711=y
CONFIG_SND_SOC_WM8728=y
CONFIG_SND_SOC_WM8731=y
CONFIG_SND_SOC_WM8737=y
CONFIG_SND_SOC_WM8741=n
CONFIG_SND_SOC_WM8750=n
CONFIG_SND_SOC_WM8753=y
CONFIG_SND_SOC_WM8776=y
CONFIG_SND_SOC_WM8782=n
CONFIG_SND_SOC_WM8804=y
CONFIG_SND_SOC_WM8804_I2C=y
CONFIG_SND_SOC_WM8903=y
CONFIG_SND_SOC_WM8904=y
CONFIG_SND_SOC_WM8960=y
CONFIG_SND_SOC_WM8962=y
CONFIG_SND_SOC_WM8974=n
CONFIG_SND_SOC_WM8978=y
CONFIG_SND_SOC_WM8985=y
CONFIG_SND_SOC_WSA881X=y
CONFIG_SND_SOC_MAX9759=n
CONFIG_SND_SOC_MT6351=n
CONFIG_SND_SOC_MT6358=y
CONFIG_SND_SOC_MT6660=y
CONFIG_SND_SOC_NAU8315=y
CONFIG_SND_SOC_NAU8540=y
CONFIG_SND_SOC_NAU8810=y
CONFIG_SND_SOC_NAU8821=y
CONFIG_SND_SOC_NAU8822=y
CONFIG_SND_SOC_NAU8824=y
CONFIG_SND_SOC_TPA6130A2=y
CONFIG_SND_SOC_LPASS_MACRO_COMMON=y
CONFIG_SND_SOC_LPASS_WSA_MACRO=n
CONFIG_SND_SOC_LPASS_VA_MACRO=y
CONFIG_SND_SOC_LPASS_RX_MACRO=n
CONFIG_SND_SOC_LPASS_TX_MACRO=y
# end of CODEC drivers

CONFIG_SND_SIMPLE_CARD_UTILS=y
CONFIG_SND_SIMPLE_CARD=y
CONFIG_SND_AUDIO_GRAPH_CARD=y
CONFIG_SND_AUDIO_GRAPH_CARD2=y
CONFIG_SND_AUDIO_GRAPH_CARD2_CUSTOM_SAMPLE=y
CONFIG_SND_TEST_COMPONENT=n
CONFIG_SND_X86=y
CONFIG_HDMI_LPE_AUDIO=y
CONFIG_SND_VIRTIO=y

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=y
CONFIG_HID_GENERIC=n

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=n
CONFIG_HID_APPLE=n
CONFIG_HID_AUREAL=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_COUGAR=n
CONFIG_HID_MACALLY=y
CONFIG_HID_CMEDIA=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELECOM=n
CONFIG_HID_EZKEY=y
CONFIG_HID_GEMBIRD=y
CONFIG_HID_GFRM=n
CONFIG_HID_GLORIOUS=y
CONFIG_HID_VIVALDI_COMMON=y
CONFIG_HID_VIVALDI=y
CONFIG_HID_KEYTOUCH=n
CONFIG_HID_KYE=y
CONFIG_HID_WALTOP=y
CONFIG_HID_VIEWSONIC=n
CONFIG_HID_XIAOMI=y
CONFIG_HID_GYRATION=n
CONFIG_HID_ICADE=n
CONFIG_HID_ITE=y
CONFIG_HID_JABRA=n
CONFIG_HID_TWINHAN=n
CONFIG_HID_KENSINGTON=n
CONFIG_HID_LCPOWER=y
CONFIG_HID_LED=y
CONFIG_HID_LENOVO=y
CONFIG_HID_MAGICMOUSE=n
CONFIG_HID_MALTRON=y
CONFIG_HID_MAYFLASH=n
CONFIG_HID_REDRAGON=n
CONFIG_HID_MICROSOFT=n
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NINTENDO=y
CONFIG_NINTENDO_FF=y
CONFIG_HID_NTI=n
CONFIG_HID_ORTEK=n
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=n
CONFIG_HID_PETALYNX=n
CONFIG_HID_PICOLCD=n
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PLAYSTATION=y
CONFIG_PLAYSTATION_FF=n
CONFIG_HID_RAZER=n
CONFIG_HID_PRIMAX=n
CONFIG_HID_SAITEK=y
CONFIG_HID_SEMITEK=y
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEAM=n
CONFIG_HID_STEELSERIES=n
CONFIG_HID_SUNPLUS=y
CONFIG_HID_RMI=y
CONFIG_HID_GREENASIA=n
CONFIG_HID_SMARTJOYPLUS=n
CONFIG_HID_TIVO=y
CONFIG_HID_TOPSEED=y
CONFIG_HID_THINGM=y
CONFIG_HID_UDRAW_PS3=y
CONFIG_HID_WIIMOTE=y
CONFIG_HID_XINMO=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=y
CONFIG_HID_ALPS=y
# end of Special HID drivers

#
# I2C HID support
#
CONFIG_I2C_HID_ACPI=n
CONFIG_I2C_HID_OF=y
CONFIG_I2C_HID_OF_GOODIX=y
# end of I2C HID support

CONFIG_I2C_HID_CORE=y
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ULPI_BUS=n
CONFIG_USB_CONN_GPIO=n
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=n
CONFIG_USB_PCI=y

#
# USB port drivers
#

#
# USB Physical Layer drivers
#
CONFIG_NOP_USB_XCEIV=n
CONFIG_USB_GPIO_VBUS=n
CONFIG_TAHVO_USB=n
# end of USB Physical Layer drivers

CONFIG_USB_GADGET=n
CONFIG_TYPEC=n
CONFIG_USB_ROLE_SWITCH=n
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=n
CONFIG_PWRSEQ_SIMPLE=n
CONFIG_SDIO_UART=y
CONFIG_MMC_TEST=n

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_DEBUG=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=n
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=n
CONFIG_MMC_SDHCI_OF_ASPEED=n
CONFIG_MMC_SDHCI_OF_AT91=y
CONFIG_MMC_SDHCI_OF_DWCMSHC=y
CONFIG_MMC_SDHCI_CADENCE=y
CONFIG_MMC_SDHCI_F_SDH30=y
CONFIG_MMC_SDHCI_MILBEAUT=y
CONFIG_MMC_WBSD=n
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_SDRICOH_CS=y
CONFIG_MMC_CB710=y
CONFIG_MMC_VIA_SDMMC=n
CONFIG_MMC_USDHI6ROL0=y
CONFIG_MMC_CQHCI=y
CONFIG_MMC_HSQ=y
CONFIG_MMC_TOSHIBA_PCI=n
CONFIG_MMC_MTK=y
CONFIG_MMC_SDHCI_XENON=n
CONFIG_MMC_SDHCI_OMAP=n
CONFIG_MMC_SDHCI_AM654=n
CONFIG_MMC_LITEX=n
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=n

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_MEMSTICK_R592=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
CONFIG_LEDS_CLASS_MULTICOLOR=y
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y

#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
CONFIG_LEDS_AN30259A=y
CONFIG_LEDS_AW2013=n
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=n
CONFIG_LEDS_LM3530=n
CONFIG_LEDS_LM3532=y
CONFIG_LEDS_LM3642=n
CONFIG_LEDS_LM3692X=y
CONFIG_LEDS_MT6323=y
CONFIG_LEDS_NET48XX=y
CONFIG_LEDS_WRAP=y
CONFIG_LEDS_PCA9532=n
CONFIG_LEDS_GPIO=n
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP50XX=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=n
CONFIG_LEDS_LP8501=y
CONFIG_LEDS_LP8860=n
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA955X_GPIO=n
CONFIG_LEDS_PCA963X=n
CONFIG_LEDS_WM831X_STATUS=n
CONFIG_LEDS_WM8350=y
CONFIG_LEDS_DA9052=y
CONFIG_LEDS_PWM=n
CONFIG_LEDS_REGULATOR=n
CONFIG_LEDS_BD2802=n
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_ADP5520=n
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX8997=n
CONFIG_LEDS_LM355x=n
CONFIG_LEDS_OT200=y
CONFIG_LEDS_IS31FL319X=n
CONFIG_LEDS_IS31FL32XX=y

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=n
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_MLXREG=y
CONFIG_LEDS_USER=y
CONFIG_LEDS_NIC78BX=n
CONFIG_LEDS_TI_LMU_COMMON=n
CONFIG_LEDS_LGM=y

#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AAT1290=n
CONFIG_LEDS_AS3645A=n
CONFIG_LEDS_KTD2692=n
CONFIG_LEDS_LM3601X=y
CONFIG_LEDS_MT6360=y
CONFIG_LEDS_RT4505=y
CONFIG_LEDS_RT8515=n
CONFIG_LEDS_SGM3140=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=n

#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y

#
# Speakup console speech
#
# end of Speakup console speech

CONFIG_INFINIBAND=n
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_AMD76X=y
CONFIG_EDAC_E7XXX=y
CONFIG_EDAC_E752X=y
CONFIG_EDAC_I82875P=y
CONFIG_EDAC_I82975X=y
CONFIG_EDAC_I3000=y
CONFIG_EDAC_I3200=n
CONFIG_EDAC_IE31200=y
CONFIG_EDAC_X38=n
CONFIG_EDAC_I5400=y
CONFIG_EDAC_I82860=n
CONFIG_EDAC_R82600=y
CONFIG_EDAC_I5000=y
CONFIG_EDAC_I5100=n
CONFIG_EDAC_I7300=y
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=n
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_DMA_OF=y
CONFIG_ALTERA_MSGDMA=y
CONFIG_DW_AXI_DMAC=y
CONFIG_FSL_EDMA=y
CONFIG_INTEL_IDMA64=n
CONFIG_PCH_DMA=y
CONFIG_PLX_DMA=y
CONFIG_TIMB_DMA=y
CONFIG_XILINX_ZYNQMP_DPDMA=y
CONFIG_QCOM_HIDMA_MGMT=n
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
CONFIG_DW_DMAC_PCI=y
CONFIG_HSU_DMA=y
CONFIG_SF_PDMA=y
CONFIG_INTEL_LDMA=n

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_UDMABUF=n
CONFIG_DMABUF_MOVE_NOTIFY=y
CONFIG_DMABUF_DEBUG=n
CONFIG_DMABUF_SELFTESTS=n
CONFIG_DMABUF_HEAPS=y
CONFIG_DMABUF_SYSFS_STATS=n
CONFIG_DMABUF_HEAPS_SYSTEM=n
CONFIG_DMABUF_HEAPS_CMA=n
# end of DMABUF options

CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=y
CONFIG_LINEDISP=y
CONFIG_HD44780_COMMON=y
CONFIG_HD44780=n
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=y
CONFIG_CFAG12864B_RATE=20
CONFIG_IMG_ASCII_LCD=y
CONFIG_HT16K33=y
CONFIG_LCD2S=y
CONFIG_PARPORT_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=n
CONFIG_CHARLCD_BL_OFF=y
CONFIG_CHARLCD_BL_ON=n
CONFIG_CHARLCD_BL_FLASH=n
CONFIG_PANEL=y
CONFIG_UIO=n
CONFIG_VFIO=y
CONFIG_VFIO_IOMMU_TYPE1=y
CONFIG_VFIO_VIRQFD=y
CONFIG_VFIO_NOIOMMU=n
CONFIG_VFIO_PCI_CORE=y
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI=y
CONFIG_VFIO_PCI_IGD=n
CONFIG_VFIO_MDEV=n
CONFIG_IRQ_BYPASS_MANAGER=y
CONFIG_VIRT_DRIVERS=n
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=n
CONFIG_VIRTIO_BALLOON=n
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
CONFIG_VDPA=n
CONFIG_VHOST_MENU=n

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=n
# end of Microsoft Hyper-V guest support

CONFIG_GREYBUS=y
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=n
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=n
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=y
CONFIG_COMEDI_PCL724=y
CONFIG_COMEDI_PCL726=y
CONFIG_COMEDI_PCL730=y
CONFIG_COMEDI_PCL812=n
CONFIG_COMEDI_PCL816=y
CONFIG_COMEDI_PCL818=y
CONFIG_COMEDI_PCM3724=y
CONFIG_COMEDI_AMPLC_DIO200_ISA=n
CONFIG_COMEDI_AMPLC_PC236_ISA=y
CONFIG_COMEDI_AMPLC_PC263_ISA=y
CONFIG_COMEDI_RTI800=y
CONFIG_COMEDI_RTI802=y
CONFIG_COMEDI_DAC02=y
CONFIG_COMEDI_DAS16M1=y
CONFIG_COMEDI_DAS08_ISA=y
CONFIG_COMEDI_DAS16=y
CONFIG_COMEDI_DAS800=y
CONFIG_COMEDI_DAS1800=y
CONFIG_COMEDI_DAS6402=y
CONFIG_COMEDI_DT2801=y
CONFIG_COMEDI_DT2811=y
CONFIG_COMEDI_DT2814=y
CONFIG_COMEDI_DT2815=n
CONFIG_COMEDI_DT2817=n
CONFIG_COMEDI_DT282X=y
CONFIG_COMEDI_DMM32AT=n
CONFIG_COMEDI_FL512=n
CONFIG_COMEDI_AIO_AIO12_8=n
CONFIG_COMEDI_AIO_IIRO_16=y
CONFIG_COMEDI_II_PCI20KC=n
CONFIG_COMEDI_C6XDIGIO=y
CONFIG_COMEDI_MPC624=y
CONFIG_COMEDI_ADQ12B=y
CONFIG_COMEDI_NI_AT_A2150=y
CONFIG_COMEDI_NI_AT_AO=y
CONFIG_COMEDI_NI_ATMIO=y
CONFIG_COMEDI_NI_ATMIO16D=y
CONFIG_COMEDI_NI_LABPC_ISA=y
CONFIG_COMEDI_PCMAD=n
CONFIG_COMEDI_PCMDA12=y
CONFIG_COMEDI_PCMMIO=y
CONFIG_COMEDI_PCMUIO=y
CONFIG_COMEDI_MULTIQ3=y
CONFIG_COMEDI_S526=n
CONFIG_COMEDI_PCI_DRIVERS=y
CONFIG_COMEDI_8255_PCI=y
CONFIG_COMEDI_ADDI_WATCHDOG=y
CONFIG_COMEDI_ADDI_APCI_1032=n
CONFIG_COMEDI_ADDI_APCI_1500=y
CONFIG_COMEDI_ADDI_APCI_1516=y
CONFIG_COMEDI_ADDI_APCI_1564=y
CONFIG_COMEDI_ADDI_APCI_16XX=y
CONFIG_COMEDI_ADDI_APCI_2032=y
CONFIG_COMEDI_ADDI_APCI_2200=y
CONFIG_COMEDI_ADDI_APCI_3120=n
CONFIG_COMEDI_ADDI_APCI_3501=y
CONFIG_COMEDI_ADDI_APCI_3XXX=n
CONFIG_COMEDI_ADL_PCI6208=y
CONFIG_COMEDI_ADL_PCI7X3X=y
CONFIG_COMEDI_ADL_PCI8164=y
CONFIG_COMEDI_ADL_PCI9111=y
CONFIG_COMEDI_ADL_PCI9118=n
CONFIG_COMEDI_ADV_PCI1710=y
CONFIG_COMEDI_ADV_PCI1720=y
CONFIG_COMEDI_ADV_PCI1723=y
CONFIG_COMEDI_ADV_PCI1724=n
CONFIG_COMEDI_ADV_PCI1760=y
CONFIG_COMEDI_ADV_PCI_DIO=n
CONFIG_COMEDI_AMPLC_DIO200_PCI=y
CONFIG_COMEDI_AMPLC_PC236_PCI=y
CONFIG_COMEDI_AMPLC_PC263_PCI=y
CONFIG_COMEDI_AMPLC_PCI224=y
CONFIG_COMEDI_AMPLC_PCI230=n
CONFIG_COMEDI_CONTEC_PCI_DIO=y
CONFIG_COMEDI_DAS08_PCI=y
CONFIG_COMEDI_DT3000=y
CONFIG_COMEDI_DYNA_PCI10XX=y
CONFIG_COMEDI_GSC_HPDI=y
CONFIG_COMEDI_MF6X4=y
CONFIG_COMEDI_ICP_MULTI=n
CONFIG_COMEDI_DAQBOARD2000=y
CONFIG_COMEDI_JR3_PCI=y
CONFIG_COMEDI_KE_COUNTER=y
CONFIG_COMEDI_CB_PCIDAS64=y
CONFIG_COMEDI_CB_PCIDAS=n
CONFIG_COMEDI_CB_PCIDDA=y
CONFIG_COMEDI_CB_PCIMDAS=y
CONFIG_COMEDI_CB_PCIMDDA=n
CONFIG_COMEDI_ME4000=y
CONFIG_COMEDI_ME_DAQ=y
CONFIG_COMEDI_NI_6527=y
CONFIG_COMEDI_NI_65XX=n
CONFIG_COMEDI_NI_660X=n
CONFIG_COMEDI_NI_670X=y
CONFIG_COMEDI_NI_LABPC_PCI=y
CONFIG_COMEDI_NI_PCIDIO=y
CONFIG_COMEDI_NI_PCIMIO=y
CONFIG_COMEDI_RTD520=y
CONFIG_COMEDI_S626=y
CONFIG_COMEDI_MITE=y
CONFIG_COMEDI_NI_TIOCMD=y
CONFIG_COMEDI_PCMCIA_DRIVERS=y
CONFIG_COMEDI_CB_DAS16_CS=y
CONFIG_COMEDI_DAS08_CS=n
CONFIG_COMEDI_NI_DAQ_700_CS=n
CONFIG_COMEDI_NI_DAQ_DIO24_CS=y
CONFIG_COMEDI_NI_LABPC_CS=y
CONFIG_COMEDI_NI_MIO_CS=y
CONFIG_COMEDI_QUATECH_DAQP_CS=n
CONFIG_COMEDI_8254=y
CONFIG_COMEDI_8255=y
CONFIG_COMEDI_8255_SA=y
CONFIG_COMEDI_KCOMEDILIB=y
CONFIG_COMEDI_AMPLC_DIO200=y
CONFIG_COMEDI_AMPLC_PC236=y
CONFIG_COMEDI_DAS08=y
CONFIG_COMEDI_ISADMA=y
CONFIG_COMEDI_NI_LABPC=y
CONFIG_COMEDI_NI_LABPC_ISADMA=y
CONFIG_COMEDI_NI_TIO=y
CONFIG_COMEDI_NI_ROUTING=y
CONFIG_COMEDI_TESTS=n
CONFIG_STAGING=n
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACPI_WMI=n
CONFIG_ACERHDF=n
CONFIG_ACER_WIRELESS=n
CONFIG_ADV_SWBUTTON=n
CONFIG_APPLE_GMUX=n
CONFIG_ASUS_LAPTOP=n
CONFIG_ASUS_WIRELESS=n
CONFIG_ASUS_TF103C_DOCK=n
CONFIG_MERAKI_MX100=n
CONFIG_EEEPC_LAPTOP=n
CONFIG_X86_PLATFORM_DRIVERS_DELL=y
CONFIG_DCDBAS=y
CONFIG_DELL_RBU=y
CONFIG_DELL_SMBIOS=n
CONFIG_DELL_SMO8800=m
CONFIG_FUJITSU_LAPTOP=n
CONFIG_FUJITSU_TABLET=n
CONFIG_GPD_POCKET_FAN=n
CONFIG_HP_ACCEL=n
CONFIG_WIRELESS_HOTKEY=n
CONFIG_IBM_RTL=y
CONFIG_SENSORS_HDAPS=y
CONFIG_THINKPAD_ACPI=n
CONFIG_INTEL_ATOMISP2_PDX86=y
CONFIG_INTEL_ATOMISP2_PM=y
CONFIG_INTEL_SAR_INT1092=n
CONFIG_INTEL_SKL_INT3472=n
CONFIG_INTEL_PMC_CORE=n
CONFIG_INTEL_PMT_CLASS=y
CONFIG_INTEL_PMT_TELEMETRY=y
CONFIG_INTEL_PMT_CRASHLOG=n
CONFIG_INTEL_HID_EVENT=n
CONFIG_INTEL_VBTN=n
CONFIG_INTEL_INT0002_VGPIO=n
CONFIG_INTEL_PUNIT_IPC=y
CONFIG_INTEL_RST=n
CONFIG_INTEL_SMARTCONNECT=n
CONFIG_INTEL_VSEC=y
CONFIG_XO15_EBOOK=n
CONFIG_PCENGINES_APU2=n
CONFIG_BARCO_P50_GPIO=y
CONFIG_SAMSUNG_LAPTOP=y
CONFIG_SAMSUNG_Q10=n
CONFIG_TOSHIBA_BT_RFKILL=n
CONFIG_TOSHIBA_HAPS=n
CONFIG_ACPI_CMPC=n
CONFIG_PANASONIC_LAPTOP=n
CONFIG_SYSTEM76_ACPI=n
CONFIG_TOPSTAR_LAPTOP=n
CONFIG_MLX_PLATFORM=y
CONFIG_INTEL_IPS=n
CONFIG_INTEL_SCU_IPC=y
CONFIG_INTEL_SCU=y
CONFIG_INTEL_SCU_PCI=y
CONFIG_INTEL_SCU_PLATFORM=n
CONFIG_INTEL_SCU_IPC_UTIL=y
CONFIG_SIEMENS_SIMATIC_IPC=n
CONFIG_PMC_ATOM=y
CONFIG_GOLDFISH_PIPE=n
CONFIG_CHROME_PLATFORMS=n
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=y
CONFIG_MLXREG_IO=n
CONFIG_MLXREG_LC=y
CONFIG_OLPC_EC=y
CONFIG_SURFACE_PLATFORMS=n
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_WM831X=y
CONFIG_COMMON_CLK_MAX9485=n
CONFIG_COMMON_CLK_SI5341=n
CONFIG_COMMON_CLK_SI5351=n
CONFIG_COMMON_CLK_SI514=n
CONFIG_COMMON_CLK_SI544=n
CONFIG_COMMON_CLK_SI570=y
CONFIG_COMMON_CLK_CDCE706=y
CONFIG_COMMON_CLK_CDCE925=n
CONFIG_COMMON_CLK_CS2000_CP=y
CONFIG_COMMON_CLK_AXI_CLKGEN=n
CONFIG_COMMON_CLK_LOCHNAGAR=y
CONFIG_COMMON_CLK_PWM=y
CONFIG_COMMON_CLK_VC5=n
CONFIG_COMMON_CLK_BD718XX=y
CONFIG_COMMON_CLK_FIXED_MMIO=y
CONFIG_CLK_LGM_CGU=n
CONFIG_XILINX_VCU=n
CONFIG_HWSPINLOCK=n

#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_MICROCHIP_PIT64B=y
# end of Clock Source drivers

CONFIG_MAILBOX=n
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support

CONFIG_IOMMU_DEBUGFS=y
CONFIG_IOMMU_DEFAULT_DMA_STRICT=n
CONFIG_IOMMU_DEFAULT_DMA_LAZY=n
CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y
CONFIG_OF_IOMMU=y
CONFIG_VIRTIO_IOMMU=n

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=n
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CHAR=n
CONFIG_RPMSG_CTRL=n
CONFIG_RPMSG_NS=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers

CONFIG_SOUNDWIRE=y

#
# SoundWire Devices
#
CONFIG_SOUNDWIRE_INTEL=n
CONFIG_SOUNDWIRE_QCOM=n

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
CONFIG_LITEX=y
CONFIG_LITEX_SOC_CONTROLLER=y
# end of Enable LiteX SoC Builder specific drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

CONFIG_SOC_TI=y

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=n
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y

#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=n
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_FSA9480=y
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_INTEL_INT3496=n
CONFIG_EXTCON_MAX3355=n
CONFIG_EXTCON_MAX8997=y
CONFIG_EXTCON_PTN5150=y
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=n
CONFIG_EXTCON_USBC_TUSB320=y
CONFIG_MEMORY=n
CONFIG_IIO=n
CONFIG_NTB=y
CONFIG_NTB_IDT=y
CONFIG_NTB_EPF=n
CONFIG_NTB_SWITCHTEC=y
CONFIG_NTB_PINGPONG=n
CONFIG_NTB_TOOL=y
CONFIG_NTB_PERF=y
CONFIG_NTB_TRANSPORT=y
CONFIG_VME_BUS=y

#
# VME Bridge Drivers
#
CONFIG_VME_CA91CX42=n
CONFIG_VME_TSI148=n
CONFIG_VME_FAKE=y

#
# VME Board Drivers
#
CONFIG_VMIVME_7805=y

#
# VME Device Drivers
#
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_DEBUG=n
CONFIG_PWM_ATMEL_TCB=y
CONFIG_PWM_DWC=y
CONFIG_PWM_FSL_FTM=n
CONFIG_PWM_INTEL_LGM=y
CONFIG_PWM_IQS620A=n
CONFIG_PWM_LP3943=n
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PCI=y
CONFIG_PWM_LPSS_PLATFORM=n
CONFIG_PWM_NTXEC=n
CONFIG_PWM_PCA9685=n
CONFIG_PWM_TWL=n
CONFIG_PWM_TWL_LED=n

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_AL_FIC=n
CONFIG_MADERA_IRQ=y
# end of IRQ chip support

CONFIG_IPACK_BUS=n
CONFIG_RESET_CONTROLLER=n

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_USB_LGM_PHY=n
CONFIG_PHY_CAN_TRANSCEIVER=y

#
# PHY drivers for Broadcom platforms
#
CONFIG_BCM_KONA_USB2_PHY=y
# end of PHY drivers for Broadcom platforms

CONFIG_PHY_CADENCE_TORRENT=y
CONFIG_PHY_CADENCE_DPHY=y
CONFIG_PHY_CADENCE_DPHY_RX=n
CONFIG_PHY_CADENCE_SALVO=y
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=n
CONFIG_PHY_LAN966X_SERDES=y
CONFIG_PHY_MAPPHONE_MDM6600=n
CONFIG_PHY_OCELOT_SERDES=y
CONFIG_PHY_INTEL_LGM_COMBO=y
CONFIG_PHY_INTEL_LGM_EMMC=y
# end of PHY Subsystem

CONFIG_POWERCAP=n
CONFIG_MCB=y
CONFIG_MCB_PCI=y
CONFIG_MCB_LPC=n

#
# Performance monitor support
#
# end of Performance monitor support

CONFIG_RAS=y
CONFIG_USB4=y
CONFIG_USB4_DEBUGFS_WRITE=n
CONFIG_USB4_DMA_TEST=n

#
# Android
#
CONFIG_ANDROID=n
# end of Android

CONFIG_DAX=y
CONFIG_DEV_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_RMEM=y

#
# HW tracing support
#
CONFIG_STM=n
CONFIG_INTEL_TH=y
CONFIG_INTEL_TH_PCI=y
CONFIG_INTEL_TH_ACPI=n
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_MSU=y
CONFIG_INTEL_TH_PTI=y
CONFIG_INTEL_TH_DEBUG=n
# end of HW tracing support

CONFIG_FPGA=y
CONFIG_ALTERA_PR_IP_CORE=n
CONFIG_FPGA_MGR_ALTERA_CVP=y
CONFIG_FPGA_BRIDGE=n
CONFIG_FPGA_DFL=n
CONFIG_FSI=n
CONFIG_MULTIPLEXER=y

#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=y
CONFIG_MUX_GPIO=y
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers

CONFIG_PM_OPP=y
CONFIG_SIOX=y
CONFIG_SIOX_BUS_GPIO=y
CONFIG_SLIMBUS=n
CONFIG_INTERCONNECT=y
CONFIG_COUNTER=n
CONFIG_MOST=y
CONFIG_MOST_CDEV=n
CONFIG_MOST_SND=n
CONFIG_PECI=n
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=n
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_VERITY=n
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=n
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=n
CONFIG_QUOTA=n
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=n
CONFIG_VIRTIO_FS=n
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=n
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_NFS_EXPORT=y
CONFIG_OVERLAY_FS_METACOPY=n

#
# Caches
#
CONFIG_NETFS_SUPPORT=y
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=n
CONFIG_FSCACHE_DEBUG=y
# end of Caches

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=n
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=n
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
CONFIG_ECRYPT_FS=y
CONFIG_ECRYPT_FS_MESSAGING=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=n
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=n
CONFIG_JFFS2_FS_SECURITY=n
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=n
CONFIG_JFFS2_RUBIN=y
CONFIG_JFFS2_CMODE_NONE=n
CONFIG_JFFS2_CMODE_PRIORITY=n
CONFIG_JFFS2_CMODE_SIZE=n
CONFIG_JFFS2_CMODE_FAVOURLZO=y
CONFIG_CRAMFS=n
CONFIG_ROMFS_FS=n
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_DEFLATE_COMPRESS=n
CONFIG_PSTORE_LZO_COMPRESS=y
CONFIG_PSTORE_LZ4_COMPRESS=y
CONFIG_PSTORE_LZ4HC_COMPRESS=y
CONFIG_PSTORE_842_COMPRESS=y
CONFIG_PSTORE_ZSTD_COMPRESS=y
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_LZO_COMPRESS_DEFAULT=n
CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT=n
CONFIG_PSTORE_LZ4HC_COMPRESS_DEFAULT=y
CONFIG_PSTORE_842_COMPRESS_DEFAULT=n
CONFIG_PSTORE_ZSTD_COMPRESS_DEFAULT=n
CONFIG_PSTORE_COMPRESS_DEFAULT="lz4hc"
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=n
CONFIG_PSTORE_RAM=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=n
CONFIG_NFS_V4=m
CONFIG_NFS_V4_1=n
CONFIG_ROOT_NFS=n
CONFIG_NFS_FSCACHE=n
CONFIG_NFS_USE_LEGACY_DNS=n
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
CONFIG_NFSD=n
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=n
CONFIG_SUNRPC_DEBUG=n
CONFIG_CEPH_FS=n
CONFIG_CIFS=m
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_UPCALL=n
CONFIG_CIFS_XATTR=n
CONFIG_CIFS_DEBUG=y
CONFIG_CIFS_DEBUG2=n
CONFIG_CIFS_DEBUG_DUMP_KEYS=n
CONFIG_CIFS_DFS_UPCALL=n
CONFIG_CIFS_SWN_UPCALL=n
CONFIG_CIFS_FSCACHE=n
CONFIG_SMB_SERVER=n
CONFIG_SMBFS_COMMON=m
CONFIG_CODA_FS=n
CONFIG_AFS_FS=n
CONFIG_9P_FS=n
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=n
CONFIG_NLS_CODEPAGE_737=n
CONFIG_NLS_CODEPAGE_775=n
CONFIG_NLS_CODEPAGE_850=n
CONFIG_NLS_CODEPAGE_852=n
CONFIG_NLS_CODEPAGE_855=n
CONFIG_NLS_CODEPAGE_857=n
CONFIG_NLS_CODEPAGE_860=n
CONFIG_NLS_CODEPAGE_861=n
CONFIG_NLS_CODEPAGE_862=n
CONFIG_NLS_CODEPAGE_863=n
CONFIG_NLS_CODEPAGE_864=n
CONFIG_NLS_CODEPAGE_865=n
CONFIG_NLS_CODEPAGE_866=n
CONFIG_NLS_CODEPAGE_869=n
CONFIG_NLS_CODEPAGE_936=n
CONFIG_NLS_CODEPAGE_950=n
CONFIG_NLS_CODEPAGE_932=n
CONFIG_NLS_CODEPAGE_949=n
CONFIG_NLS_CODEPAGE_874=n
CONFIG_NLS_ISO8859_8=n
CONFIG_NLS_CODEPAGE_1250=n
CONFIG_NLS_CODEPAGE_1251=n
CONFIG_NLS_ASCII=n
CONFIG_NLS_ISO8859_1=n
CONFIG_NLS_ISO8859_2=n
CONFIG_NLS_ISO8859_3=n
CONFIG_NLS_ISO8859_4=n
CONFIG_NLS_ISO8859_5=n
CONFIG_NLS_ISO8859_6=n
CONFIG_NLS_ISO8859_7=n
CONFIG_NLS_ISO8859_9=n
CONFIG_NLS_ISO8859_13=n
CONFIG_NLS_ISO8859_14=n
CONFIG_NLS_ISO8859_15=n
CONFIG_NLS_KOI8_R=n
CONFIG_NLS_KOI8_U=n
CONFIG_NLS_MAC_ROMAN=n
CONFIG_NLS_MAC_CELTIC=n
CONFIG_NLS_MAC_CENTEURO=n
CONFIG_NLS_MAC_CROATIAN=n
CONFIG_NLS_MAC_CYRILLIC=n
CONFIG_NLS_MAC_GAELIC=n
CONFIG_NLS_MAC_GREEK=n
CONFIG_NLS_MAC_ICELAND=n
CONFIG_NLS_MAC_INUIT=n
CONFIG_NLS_MAC_ROMANIAN=n
CONFIG_NLS_MAC_TURKISH=n
CONFIG_NLS_UTF8=n
CONFIG_DLM=n
CONFIG_UNICODE=n
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=n
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_USER_DECRYPTED_DATA=n
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=n
CONFIG_SECURITY=y
CONFIG_SECURITYFS=n
CONFIG_SECURITY_NETWORK=n
CONFIG_SECURITY_PATH=n
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY_PAGESPAN=n
CONFIG_FORTIFY_SOURCE=y
CONFIG_STATIC_USERMODEHELPER=n
CONFIG_SECURITY_SMACK=n
CONFIG_SECURITY_TOMOYO=n
CONFIG_SECURITY_APPARMOR=n
CONFIG_SECURITY_YAMA=n
CONFIG_SECURITY_SAFESETID=n
CONFIG_SECURITY_LOCKDOWN_LSM=n
CONFIG_SECURITY_LANDLOCK=n
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=n
CONFIG_IMA=n
CONFIG_EVM=n
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
CONFIG_INIT_ON_FREE_DEFAULT_ON=n
# end of Memory initialization
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=n
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=n
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_ENGINE=y

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_DH_RFC7919_GROUPS=n
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECDSA=n
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_SM2=y
CONFIG_CRYPTO_CURVE25519=n

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=n
CONFIG_CRYPTO_AEGIS128=n
CONFIG_CRYPTO_SEQIV=n
CONFIG_CRYPTO_ECHAINIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=n
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=n
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=n
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=n
CONFIG_CRYPTO_NHPOLY1305=y
CONFIG_CRYPTO_ADIANTUM=y
CONFIG_CRYPTO_ESSIV=y

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32_PCLMUL=n
CONFIG_CRYPTO_XXHASH=y
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_BLAKE2S=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=n
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=n
CONFIG_CRYPTO_RMD160=n
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
CONFIG_CRYPTO_AES_NI_INTEL=n
CONFIG_CRYPTO_BLOWFISH=n
CONFIG_CRYPTO_CAMELLIA=n
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_586=y
CONFIG_CRYPTO_SM4=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=n

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=n
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=n
CONFIG_CRYPTO_DRBG_CTR=n
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_KDF800108_CTR=y
CONFIG_CRYPTO_USER_API_HASH=n
CONFIG_CRYPTO_USER_API_SKCIPHER=n
CONFIG_CRYPTO_USER_API_RNG=n
CONFIG_CRYPTO_USER_API_AEAD=n
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=n
CONFIG_CRYPTO_DEV_GEODE=n
CONFIG_CRYPTO_DEV_HIFN_795X=y
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_CRYPTO_DEV_ATMEL_I2C=y
CONFIG_CRYPTO_DEV_ATMEL_ECC=y
CONFIG_CRYPTO_DEV_ATMEL_SHA204A=y
CONFIG_CRYPTO_DEV_CCP=n
CONFIG_CRYPTO_DEV_QAT=y
CONFIG_CRYPTO_DEV_QAT_DH895xCC=n
CONFIG_CRYPTO_DEV_QAT_C3XXX=y
CONFIG_CRYPTO_DEV_QAT_C62X=y
CONFIG_CRYPTO_DEV_QAT_4XXX=n
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=y
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=n
CONFIG_CRYPTO_DEV_QAT_C62XVF=y
CONFIG_CRYPTO_DEV_VIRTIO=y
CONFIG_CRYPTO_DEV_SAFEXCEL=n
CONFIG_CRYPTO_DEV_CCREE=y
CONFIG_CRYPTO_DEV_AMLOGIC_GXL=y
CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG=y
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=n

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=n
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=n
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_LIB_SM3=y
CONFIG_CRYPTO_LIB_SM4=y
# end of Crypto library routines

CONFIG_CRC_CCITT=n
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=n
CONFIG_CRC64_ROCKSOFT=n
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=n
CONFIG_CRC32_SLICEBY8=n
CONFIG_CRC32_SLICEBY4=y
CONFIG_CRC32_SARWATE=n
CONFIG_CRC32_BIT=n
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_RANDOM32_SELFTEST=n
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=n
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_MICROLZMA=n
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=n
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_BCH=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_DMA_CMA=y
CONFIG_DMA_PERNUMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CMA_SIZE_SEL_MBYTES=y
CONFIG_CMA_SIZE_SEL_PERCENTAGE=n
CONFIG_CMA_SIZE_SEL_MIN=n
CONFIG_CMA_SIZE_SEL_MAX=n
CONFIG_CMA_ALIGNMENT=8
CONFIG_DMA_API_DEBUG=n
CONFIG_DMA_MAP_BENCHMARK=y
CONFIG_SGL_ALLOC=y
CONFIG_CPUMASK_OFFSTACK=n
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=n
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=n
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_32=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACK_HASH_ORDER=20
CONFIG_REF_TRACKER=y
# end of Library routines

CONFIG_ASN1_ENCODER=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
CONFIG_STACKTRACE_BUILD_ID=n
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_DEBUG_SYNCHRO_TEST=n
CONFIG_BOOT_PRINTK_DELAY=n
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=n
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=n

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_NONE=n
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_DEBUG_INFO_DWARF4=n
CONFIG_DEBUG_INFO_DWARF5=n
CONFIG_DEBUG_INFO_REDUCED=y
CONFIG_DEBUG_INFO_COMPRESSED=n
CONFIG_DEBUG_INFO_SPLIT=n
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_GDB_SCRIPTS=y
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=n
CONFIG_READABLE_ASM=y
CONFIG_HEADERS_INSTALL=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_FRAME_POINTER=y
CONFIG_VMLINUX_MAP=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
CONFIG_DEBUG_FS_DISALLOW_MOUNT=n
CONFIG_DEBUG_FS_ALLOW_NONE=n
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=n
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
CONFIG_UBSAN_TRAP=n
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ONLY_BOUNDS=y
CONFIG_UBSAN_SHIFT=y
CONFIG_UBSAN_DIV_ZERO=n
CONFIG_UBSAN_UNREACHABLE=n
CONFIG_UBSAN_BOOL=n
CONFIG_UBSAN_ENUM=n
CONFIG_UBSAN_ALIGNMENT=n
CONFIG_UBSAN_SANITIZE_ALL=y
CONFIG_TEST_UBSAN=n
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
CONFIG_NET_DEV_REFCNT_TRACKER=y
CONFIG_NET_NS_REFCNT_TRACKER=y
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=n
CONFIG_PAGE_OWNER=n
CONFIG_PAGE_POISONING=n
CONFIG_DEBUG_PAGE_REF=n
CONFIG_DEBUG_RODATA_TEST=n
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
CONFIG_PTDUMP_DEBUGFS=n
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=n
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=n
CONFIG_DEBUG_OBJECTS_WORK=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=n
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=n
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM=n
CONFIG_DEBUG_VM_PGTABLE=n
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_DEBUG_KMAP_LOCAL=y
CONFIG_ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP=y
CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y
CONFIG_DEBUG_HIGHMEM=n
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_HAVE_ARCH_KFENCE=y
CONFIG_KFENCE=y
CONFIG_KFENCE_SAMPLE_INTERVAL=100
CONFIG_KFENCE_NUM_OBJECTS=255
CONFIG_KFENCE_DEFERRABLE=n
CONFIG_KFENCE_STRESS_TEST_FAULTS=0
# end of Memory Debugging

CONFIG_DEBUG_SHIRQ=n

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_HARDLOCKUP_DETECTOR=n
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=480
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
CONFIG_WQ_WATCHDOG=y
CONFIG_TEST_LOCKUP=n
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

CONFIG_DEBUG_TIMEKEEPING=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RAW_LOCK_NESTING=n
CONFIG_LOCK_STAT=n
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
CONFIG_DEBUG_LOCKDEP=n
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=n
CONFIG_LOCK_TORTURE_TEST=m
CONFIG_WW_MUTEX_SELFTEST=n
CONFIG_SCF_TORTURE_TEST=n
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_TRACE_IRQFLAGS=y
CONFIG_TRACE_IRQFLAGS_NMI=y
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=n
CONFIG_DEBUG_KOBJECT=n

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=n
CONFIG_DEBUG_SG=n
CONFIG_DEBUG_NOTIFIERS=n
CONFIG_BUG_ON_DATA_CORRUPTION=n
# end of Debug kernel data structures

CONFIG_DEBUG_CREDENTIALS=n

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_TORTURE_TEST=m
CONFIG_RCU_SCALE_TEST=m
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_REF_SCALE_TEST=n
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=n
CONFIG_RCU_EQS_DEBUG=n
# end of RCU Debugging

CONFIG_DEBUG_WQ_FORCE_RR_CPU=n
CONFIG_CPU_HOTPLUG_STATE_CONTROL=y
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_BOOTTIME_TRACING=n
CONFIG_FUNCTION_TRACER=n
CONFIG_STACK_TRACER=n
CONFIG_IRQSOFF_TRACER=y
CONFIG_SCHED_TRACER=n
CONFIG_HWLAT_TRACER=n
CONFIG_OSNOISE_TRACER=y
CONFIG_TIMERLAT_TRACER=y
CONFIG_MMIOTRACE=n
CONFIG_FTRACE_SYSCALLS=n
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_BRANCH_PROFILE_NONE=y
CONFIG_PROFILE_ANNOTATED_BRANCHES=n
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_SYNTH_EVENTS=y
CONFIG_USER_EVENTS=n
CONFIG_HIST_TRIGGERS=n
CONFIG_TRACE_EVENT_INJECT=n
CONFIG_TRACEPOINT_BENCHMARK=y
CONFIG_RING_BUFFER_BENCHMARK=y
CONFIG_TRACE_EVAL_MAP_FILE=n
CONFIG_FTRACE_STARTUP_TEST=n
CONFIG_RING_BUFFER_STARTUP_TEST=n
CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS=y
CONFIG_PREEMPTIRQ_DELAY_TEST=n
CONFIG_SYNTH_EVENT_GEN_TEST=n
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_SAMPLES=y
CONFIG_SAMPLE_AUXDISPLAY=y
CONFIG_SAMPLE_TRACE_EVENTS=n
CONFIG_SAMPLE_TRACE_CUSTOM_EVENTS=n
CONFIG_SAMPLE_TRACE_PRINTK=n
CONFIG_SAMPLE_TRACE_ARRAY=n
CONFIG_SAMPLE_KOBJECT=y
CONFIG_SAMPLE_HW_BREAKPOINT=n
CONFIG_SAMPLE_KFIFO=n
CONFIG_SAMPLE_RPMSG_CLIENT=n
CONFIG_SAMPLE_CONFIGFS=n
CONFIG_SAMPLE_FANOTIFY_ERROR=n
CONFIG_SAMPLE_HIDRAW=n
CONFIG_SAMPLE_LANDLOCK=y
CONFIG_SAMPLE_PIDFD=y
CONFIG_SAMPLE_SECCOMP=n
CONFIG_SAMPLE_TIMER=y
CONFIG_SAMPLE_UHID=y
CONFIG_SAMPLE_VFIO_MDEV_MDPY_FB=n
CONFIG_SAMPLE_ANDROID_BINDERFS=y
CONFIG_SAMPLE_VFS=y
CONFIG_SAMPLE_INTEL_MEI=n
CONFIG_SAMPLE_WATCHDOG=n
CONFIG_SAMPLE_WATCH_QUEUE=n
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y

#
# x86 Debugging
#
CONFIG_DEBUG_AID_FOR_SYZBOT=n
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_USB_XDBC=y
CONFIG_DEBUG_TLBFLUSH=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=n
CONFIG_IO_DELAY_0X80=n
CONFIG_IO_DELAY_0XED=n
CONFIG_IO_DELAY_UDELAY=n
CONFIG_IO_DELAY_NONE=y
CONFIG_DEBUG_BOOT_PARAMS=n
CONFIG_CPA_DEBUG=n
CONFIG_DEBUG_ENTRY=y
CONFIG_DEBUG_NMI_SELFTEST=n
CONFIG_X86_DEBUG_FPU=y
CONFIG_PUNIT_ATOM_DEBUG=y
CONFIG_UNWINDER_FRAME_POINTER=y
# end of x86 Debugging

#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=n
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=y
CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=n
CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=n
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=n
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAULT_INJECTION_USERCOPY=n
CONFIG_FAIL_FUTEX=n
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAIL_MMC_REQUEST=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=n
CONFIG_TEST_MIN_HEAP=n
CONFIG_TEST_DIV64=n
CONFIG_BACKTRACE_SELF_TEST=n
CONFIG_TEST_REF_TRACKER=n
CONFIG_RBTREE_TEST=n
CONFIG_REED_SOLOMON_TEST=n
CONFIG_INTERVAL_TREE_TEST=n
CONFIG_PERCPU_TEST=n
CONFIG_ATOMIC64_SELFTEST=n
CONFIG_TEST_HEXDUMP=n
CONFIG_STRING_SELFTEST=n
CONFIG_TEST_STRING_HELPERS=n
CONFIG_TEST_STRSCPY=n
CONFIG_TEST_KSTRTOX=n
CONFIG_TEST_PRINTF=n
CONFIG_TEST_SCANF=n
CONFIG_TEST_BITMAP=n
CONFIG_TEST_UUID=n
CONFIG_TEST_XARRAY=n
CONFIG_TEST_RHASHTABLE=n
CONFIG_TEST_SIPHASH=n
CONFIG_TEST_IDA=n
CONFIG_TEST_LKM=n
CONFIG_TEST_BITOPS=n
CONFIG_TEST_VMALLOC=n
CONFIG_TEST_USER_COPY=n
CONFIG_TEST_BPF=n
CONFIG_TEST_BLACKHOLE_DEV=n
CONFIG_FIND_BIT_BENCHMARK=n
CONFIG_TEST_FIRMWARE=n
CONFIG_TEST_SYSCTL=n
CONFIG_TEST_UDELAY=n
CONFIG_TEST_STATIC_KEYS=n
CONFIG_TEST_DEBUG_VIRTUAL=n
CONFIG_TEST_MEMCAT_P=n
CONFIG_TEST_MEMINIT=n
CONFIG_TEST_FREE_PAGES=n
CONFIG_TEST_FPU=n
CONFIG_TEST_CLOCKSOURCE_WATCHDOG=n
CONFIG_ARCH_USE_MEMTEST=y
CONFIG_MEMTEST=n
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking

[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 4783 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='boot'
	export testcase='boot'
	export category='functional'
	export timeout='10m'
	export job_origin='boot.yaml'
	export queue_cmdline_keys='branch
commit'
	export queue='validate'
	export testbox='vm-icl-74'
	export tbox_group='vm-icl'
	export branch='linux-review/Zi-Yan/Split-a-huge-page-to-any-lower-order-pages/20220321-222304'
	export commit='2757cee2d6c6c76f672ec6566ade2dcb8c1605dd'
	export kconfig='i386-randconfig-a013-20220321'
	export repeat_to=6
	export nr_vm=160
	export submit_id='6239b87c7f50e69ad9ce9eb3'
	export job_file='/lkp/jobs/scheduled/vm-icl-74/boot-1-debian-i386-20191205.cgz-2757cee2d6c6c76f672ec6566ade2dcb8c1605dd-20220322-39641-na3mp9-2.yaml'
	export id='1f903110bb362c394ded483eacf9f2d79fdd2374'
	export queuer_version='/lkp-src'
	export model='qemu-system-x86_64 -enable-kvm -cpu Icelake-Server'
	export nr_cpu=4
	export memory='16G'
	export need_kconfig=\{\"KVM_GUEST\"\=\>\"y\"\}
	export ssh_base_port=23600
	export kernel_cmdline='vmalloc=128M initramfs_async=0 page_owner=on'
	export rootfs='debian-i386-20191205.cgz'
	export compiler='gcc-9'
	export enqueue_time='2022-03-22 19:52:28 +0800'
	export _id='6239b87c7f50e69ad9ce9eb3'
	export _rt='/result/boot/1/vm-icl/debian-i386-20191205.cgz/i386-randconfig-a013-20220321/gcc-9/2757cee2d6c6c76f672ec6566ade2dcb8c1605dd'
	export user='lkp'
	export LKP_SERVER='internal-lkp-server'
	export result_root='/result/boot/1/vm-icl/debian-i386-20191205.cgz/i386-randconfig-a013-20220321/gcc-9/2757cee2d6c6c76f672ec6566ade2dcb8c1605dd/3'
	export scheduler_version='/lkp/lkp/.src-20220322-165139'
	export arch='i386'
	export max_uptime=600
	export initrd='/osimage/debian/debian-i386-20191205.cgz'
	export bootloader_append='root=/dev/ram0
RESULT_ROOT=/result/boot/1/vm-icl/debian-i386-20191205.cgz/i386-randconfig-a013-20220321/gcc-9/2757cee2d6c6c76f672ec6566ade2dcb8c1605dd/3
BOOT_IMAGE=/pkg/linux/i386-randconfig-a013-20220321/gcc-9/2757cee2d6c6c76f672ec6566ade2dcb8c1605dd/vmlinuz-5.17.0-rc8-mm1-00485-g2757cee2d6c6
branch=linux-review/Zi-Yan/Split-a-huge-page-to-any-lower-order-pages/20220321-222304
job=/lkp/jobs/scheduled/vm-icl-74/boot-1-debian-i386-20191205.cgz-2757cee2d6c6c76f672ec6566ade2dcb8c1605dd-20220322-39641-na3mp9-2.yaml
user=lkp
ARCH=i386
kconfig=i386-randconfig-a013-20220321
commit=2757cee2d6c6c76f672ec6566ade2dcb8c1605dd
vmalloc=128M initramfs_async=0 page_owner=on
max_uptime=600
LKP_SERVER=internal-lkp-server
selinux=0
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
console=tty0
earlyprintk=ttyS0,115200
console=ttyS0,115200
vga=normal
rw'
	export modules_initrd='/pkg/linux/i386-randconfig-a013-20220321/gcc-9/2757cee2d6c6c76f672ec6566ade2dcb8c1605dd/modules.cgz'
	export bm_initrd='/osimage/deps/debian-i386-20191205.cgz/lkp_20201203.cgz'
	export lkp_initrd='/osimage/user/lkp/lkp-i386.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export schedule_notify_address=
	export kernel='/pkg/linux/i386-randconfig-a013-20220321/gcc-9/2757cee2d6c6c76f672ec6566ade2dcb8c1605dd/vmlinuz-5.17.0-rc8-mm1-00485-g2757cee2d6c6'
	export dequeue_time='2022-03-22 19:55:49 +0800'
	export job_initrd='/lkp/jobs/scheduled/vm-icl-74/boot-1-debian-i386-20191205.cgz-2757cee2d6c6c76f672ec6566ade2dcb8c1605dd-20220322-39641-na3mp9-2.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-slabinfo
	run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-meminfo
	run_monitor $LKP_SRC/monitors/one-shot/wrapper memmap
	run_monitor $LKP_SRC/monitors/no-stdout/wrapper boot-time
	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper heartbeat
	run_monitor $LKP_SRC/monitors/wrapper meminfo
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog

	run_test $LKP_SRC/tests/wrapper sleep 1
}

extract_stats()
{
	export stats_part_begin=
	export stats_part_end=

	$LKP_SRC/stats/wrapper boot-slabinfo
	$LKP_SRC/stats/wrapper boot-meminfo
	$LKP_SRC/stats/wrapper memmap
	$LKP_SRC/stats/wrapper boot-memory
	$LKP_SRC/stats/wrapper boot-time
	$LKP_SRC/stats/wrapper kernel-size
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper sleep
	$LKP_SRC/stats/wrapper meminfo

	$LKP_SRC/stats/wrapper time sleep.time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper last_state
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper time
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/x-xz, Size: 15936 bytes --]

[mm] 2757cee2d6: UBSAN:shift-out-of-bounds_in_include/linux/log2.h

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 9629 bytes --]



Greeting,

FYI, we noticed the following commit (built with gcc-9):

commit: 2757cee2d6c6c76f672ec6566ade2dcb8c1605dd ("[RFC PATCH 4/5] mm: truncate: split huge page cache page to a non-zero order if possible.")
url: https://github.com/0day-ci/linux/commits/Zi-Yan/Split-a-huge-page-to-any-lower-order-pages/20220321-222304
base: https://github.com/hnaz/linux-mm master
patch link: https://lore.kernel.org/linux-mm/20220321142128.2471199-5-zi.yan(a)sent.com

in testcase: boot

on test machine: qemu-system-x86_64 -enable-kvm -cpu Icelake-Server -smp 4 -m 16G

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):



If you fix the issue, kindly add following tag
Reported-by: kernel test robot <oliver.sang@intel.com>


[   25.633813][  T275] UBSAN: shift-out-of-bounds in include/linux/log2.h:67:13
[   25.635404][  T275] shift exponent 4294967295 is too large for 32-bit type 'long unsigned int'
[   25.636781][  T275] CPU: 3 PID: 275 Comm: cron Not tainted 5.17.0-rc8-mm1-00485-g2757cee2d6c6 #1
[   25.638246][  T275] Call Trace:
[ 25.638768][ T275] dump_stack_lvl (lib/dump_stack.c:107) 
[ 25.651568][ T275] dump_stack (lib/dump_stack.c:114) 
[ 25.652209][ T275] ubsan_epilogue (lib/ubsan.c:152) 
[ 25.652926][ T275] __ubsan_handle_shift_out_of_bounds.cold (arch/x86/include/asm/smap.h:85) 
[ 25.654034][ T275] ? lock_release (kernel/locking/lockdep.c:5348 kernel/locking/lockdep.c:5692) 
[ 25.654781][ T275] ? __kmap_local_pfn_prot (mm/highmem.c:532) 
[ 25.655650][ T275] ? kunmap_local_indexed (mm/highmem.c:600 (discriminator 3)) 
[ 25.656382][ T275] ? zero_user_segments (mm/highmem.c:408) 
[ 25.657110][ T275] greatest_pow_of_two_multiplier.cold (include/linux/log2.h:67 mm/truncate.c:204) 
[ 25.658134][ T275] truncate_inode_partial_folio (mm/truncate.c:255) 
g System Logging[ 25.659902][ T275] shmem_undo_range (mm/shmem.c:966) 
Service...
[ 25.660789][ T275] ? zero_user_segments (mm/highmem.c:408) 
[ 25.661744][ T275] ? folio_mark_dirty (mm/page-writeback.c:2717) 
[ 25.662480][ T275] ? unlock_page (mm/folio-compat.c:21) 
[ 25.663179][ T275] ? __lock_acquire (kernel/locking/lockdep.c:5060) 
[ 25.668235][ T275] shmem_truncate_range (mm/shmem.c:1045) 
[ 25.668251][ T275] ? setattr_prepare (fs/attr.c:108) 
[ 25.668256][ T275] ? mark_held_locks (kernel/locking/lockdep.c:4239) 
Startin[ 25.668262][ T275] shmem_setattr (mm/shmem.c:1109) 
g /etc/rc.local [ 25.675802][ T275] ? shmem_setattr (mm/shmem.c:1109) 
Compatibility...[ 25.676621][ T275] ? current_time (fs/inode.c:2406) 

[ 25.677351][ T275] notify_change (fs/attr.c:414) 
[ 25.677989][ T275] ? shmem_evict_inode (mm/shmem.c:1077) 
[ 25.678735][ T275] ? notify_change (fs/attr.c:414) 
[ 25.679481][ T275] ? lock_acquire (kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5674) 
[ 25.680186][ T275] do_truncate (fs/open.c:67) 
[ 25.680843][ T275] ? do_truncate (fs/open.c:67) 
[ 25.681520][ T275] ? do_truncate (fs/open.c:67) 
[ 25.682230][ T275] do_sys_ftruncate (fs/open.c:197) 
[ 25.683001][ T275] __ia32_sys_ftruncate (fs/open.c:204) 
[ 25.684027][ T275] __do_fast_syscall_32 (arch/x86/entry/common.c:112 arch/x86/entry/common.c:178) 
[ 25.684801][ T275] ? irqentry_exit_to_user_mode (kernel/entry/common.c:324) 
[ 25.685720][ T275] do_fast_syscall_32 (arch/x86/entry/common.c:203) 
[ 25.686464][ T275] do_SYSENTER_32 (arch/x86/entry/common.c:247) 
[ 25.687172][ T275] entry_SYSENTER_32 (arch/x86/entry/entry_32.S:869) 
[   25.687180][  T275] EIP: 0xa7f00549
[ 25.687184][ T275] Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76
All code
========
   0:	03 74 c0 01          	add    0x1(%rax,%rax,8),%esi
   4:	10 05 03 74 b8 01    	adc    %al,0x1b87403(%rip)        # 0x1b8740d
   a:	10 06                	adc    %al,(%rsi)
   c:	03 74 b4 01          	add    0x1(%rsp,%rsi,4),%esi
  10:	10 07                	adc    %al,(%rdi)
  12:	03 74 b0 01          	add    0x1(%rax,%rsi,4),%esi
  16:	10 08                	adc    %cl,(%rax)
  18:	03 74 d8 01          	add    0x1(%rax,%rbx,8),%esi
  1c:	00 00                	add    %al,(%rax)
  1e:	00 00                	add    %al,(%rax)
  20:	00 51 52             	add    %dl,0x52(%rcx)
  23:	55                   	push   %rbp
  24:	89 e5                	mov    %esp,%ebp
  26:	0f 34                	sysenter 
  28:	cd 80                	int    $0x80
  2a:*	5d                   	pop    %rbp		<-- trapping instruction
  2b:	5a                   	pop    %rdx
  2c:	59                   	pop    %rcx
  2d:	c3                   	retq   
  2e:	90                   	nop
  2f:	90                   	nop
  30:	90                   	nop
  31:	90                   	nop
  32:	8d 76 00             	lea    0x0(%rsi),%esi
  35:	58                   	pop    %rax
  36:	b8 77 00 00 00       	mov    $0x77,%eax
  3b:	cd 80                	int    $0x80
  3d:	90                   	nop
  3e:	8d                   	.byte 0x8d
  3f:	76                   	.byte 0x76

Code starting with the faulting instruction
===========================================
   0:	5d                   	pop    %rbp
   1:	5a                   	pop    %rdx
   2:	59                   	pop    %rcx
   3:	c3                   	retq   
   4:	90                   	nop
   5:	90                   	nop
   6:	90                   	nop
   7:	90                   	nop
   8:	8d 76 00             	lea    0x0(%rsi),%esi
   b:	58                   	pop    %rax
   c:	b8 77 00 00 00       	mov    $0x77,%eax
  11:	cd 80                	int    $0x80
  13:	90                   	nop
  14:	8d                   	.byte 0x8d
  15:	76                   	.byte 0x76
[   25.687187][  T275] EAX: ffffffda EBX: 00000003 ECX: 00000004 EDX: 00453000
[   25.687190][  T275] ESI: 00000004 EDI: 00000002 EBP: 0207e168 ESP: aff7174c
[   25.687193][  T275] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000292
[   25.687280][  T275] ================================================================================
Starting LKP bootstrap...
[  OK  ] Started D-Bus System Message Bus.
[   25.719619] rc.local[280]: mkdir: cannot create directory '/var/lock/lkp-bootstrap.lock': File exists
[  OK  ] Started Daily Cleanup of Temporary Directories.
Starting Login Service...
[  OK  ] Started Daily apt upgrade and clean activities.
[  OK  ] Reached target Timers.
Starting LSB: Execute the kexec -e command to reboot system...
Starting OpenBSD Secure Shell server...
Starting Permit User Sessions...
[  OK  ] Started LKP bootstrap.
[  OK  ] Started Permit User Sessions.
[  OK  ] Started LSB: Start and stop bmc-watchdog.
[  OK  ] Started OpenBSD Secure Shell server.
[  OK  ] Started LSB: Execute the kexec -e command to reboot system.
[  OK  ] Started Login Service.
Starting LSB: Load kernel image with kexec...
LKP: ttyS0: 290: Kernel tests: Boot OK!
LKP: ttyS0: 290: HOSTNAME vm-icl-74, MAC 52:54:00:12:34:56, kernel 5.17.0-rc8-mm1-00485-g2757cee2d6c6 1
[  OK  ] Reached target Sound Card.
[  OK  ] Reached target Printer.
[  OK  ] Started LSB: Load kernel image with kexec.
LKP: ttyS0: 290:  /lkp/lkp/src/bin/run-lkp /lkp/jobs/scheduled/vm-icl-74/boot-1-debian-i386-20191205.cgz-2757cee2d6c6c76f672ec6566ade2dcb8c1605dd-20220322-39641-na3mp9-2.yaml
[   32.682503][  T516] wget (516) used greatest stack depth: 5812 bytes left
[  OK  ] Started System Logging Service.
[   36.389049][  T556] rsync (556) used greatest stack depth: 5772 bytes left
[   37.653297][  T315] LKP: stdout: 290: Kernel tests: Boot OK!
[   37.653316][  T315]
[   40.012523][  T605] wget (605) used greatest stack depth: 5732 bytes left
LKP: ttyS0: 290: LKP: rebooting forcely
[   42.275963][  T315] LKP: stdout: 290: HOSTNAME vm-icl-74, MAC 52:54:00:12:34:56, kernel 5.17.0-rc8-mm1-00485-g2757cee2d6c6 1
[   42.275991][  T315]
[   42.291539][  T315] install debs round one: dpkg -i --force-confdef --force-depends /opt/deb/gawk_1%3a4.1.4+dfsg-1_i386.deb
[   42.291562][  T315]
[   42.297409][  T315] Selecting previously unselected package gawk.
[   42.297426][  T315]
[   42.314957][  T315] (Reading database ... 16210 files and directories currently installed.)
[   42.314974][  T315]
[   42.319689][  T315] Preparing to unpack .../gawk_1%3a4.1.4+dfsg-1_i386.deb ...
[   42.319710][  T315]
[   42.323192][  T315] Unpacking gawk (1:4.1.4+dfsg-1) ...
[   42.323208][  T315]
[   42.326270][  T315] Setting up gawk (1:4.1.4+dfsg-1) ...
[   42.326285][  T315]
[   42.941438][  T290] sysrq: Emergency Sync
[   42.942418][   T36] Emergency Sync complete
[   42.943081][  T290] sysrq: Resetting

Kboot worker: lkp-worker04
Elapsed time: 60

kvm=(
qemu-system-x86_64
-enable-kvm


To reproduce:

        # build kernel
	cd linux
	cp config-5.17.0-rc8-mm1-00485-g2757cee2d6c6 .config
	make HOSTCC=gcc-9 CC=gcc-9 ARCH=i386 olddefconfig prepare modules_prepare bzImage modules
	make HOSTCC=gcc-9 CC=gcc-9 ARCH=i386 INSTALL_MOD_PATH=<mod-install-dir> modules_install
	cd <mod-install-dir>
	find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz


        git clone https://github.com/intel/lkp-tests.git
        cd lkp-tests
        bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email

        # if come across any failure that blocks the test,
        # please remove ~/.lkp and /lkp dir to run from a clean state.



-- 
0-DAY CI Kernel Test Service
https://01.org/lkp



[-- Attachment #2: config-5.17.0-rc8-mm1-00485-g2757cee2d6c6 --]
[-- Type: text/plain, Size: 125746 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 5.17.0-rc8-mm1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc-9 (Ubuntu 9.4.0-1ubuntu1~20.04) 9.4.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=90400
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23502
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23502
CONFIG_LLD_VERSION=0
CONFIG_RUST_IS_AVAILABLE=y
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=n
CONFIG_WERROR=n
CONFIG_UAPI_HEADER_TEST=y
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_KERNEL_GZIP=n
CONFIG_KERNEL_BZIP2=y
CONFIG_KERNEL_LZMA=n
CONFIG_KERNEL_XZ=n
CONFIG_KERNEL_LZO=n
CONFIG_KERNEL_LZ4=n
CONFIG_KERNEL_ZSTD=n
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=n
CONFIG_POSIX_MQUEUE=n
CONFIG_WATCH_QUEUE=n
CONFIG_CROSS_MEMORY_ATTACH=n
CONFIG_USELIB=y
CONFIG_AUDIT=n
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
CONFIG_HZ_PERIODIC=n
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=n
CONFIG_HIGH_RES_TIMERS=n
CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=100
# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=n
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
CONFIG_BPF_PRELOAD=n
# end of BPF subsystem

CONFIG_PREEMPT_VOLUNTARY_BUILD=y
CONFIG_PREEMPT_NONE=n
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_PREEMPT=n
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPT_DYNAMIC=n
CONFIG_SCHED_CORE=y
CONFIG_ARCH_WANTS_RT_DELAYED_SIGNALS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_SCHED_AVG_IRQ=y
CONFIG_BSD_PROCESS_ACCT=n
CONFIG_TASKSTATS=n
CONFIG_PSI=y
CONFIG_PSI_DEFAULT_DISABLED=n
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=n

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_RCU_EXPERT=n
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_IKHEADERS=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_PRINTK_INDEX=y
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y

#
# Scheduler features
#
CONFIG_UCLAMP_TASK=y
CONFIG_UCLAMP_BUCKETS_COUNT=5
# end of Scheduler features

CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_CGROUP_SCHED=n
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=n
CONFIG_CGROUP_HUGETLB=n
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=n
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=n
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=n
CONFIG_CHECKPOINT_RESTORE=n
CONFIG_SCHED_AUTOGROUP=n
CONFIG_SYSFS_DEPRECATED=n
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=n
CONFIG_BOOT_CONFIG=n
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=n
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=n
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=n
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=n
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=n
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=n
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=n

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# end of Kernel Performance Events And Counters

CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=n
CONFIG_SLAB=n
CONFIG_SLUB=y
CONFIG_SLOB=n
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=n
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_PROFILING=n
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_NR_GPIO=512
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_X86_32_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_MPPARSE=y
CONFIG_GOLDFISH=y
CONFIG_RETPOLINE=n
CONFIG_X86_BIGSMP=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_GOLDFISH=n
CONFIG_X86_INTEL_LPSS=n
CONFIG_X86_AMD_PLATFORM_DEVICE=n
CONFIG_IOSF_MBI=y
CONFIG_IOSF_MBI_DEBUG=y
CONFIG_X86_RDC321X=n
CONFIG_X86_32_NON_STANDARD=y
CONFIG_STA2X11=n
CONFIG_X86_32_IRIS=y
CONFIG_SCHED_OMIT_FRAME_POINTER=n
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_DEBUG=n
CONFIG_PARAVIRT_SPINLOCKS=n
CONFIG_X86_HV_CALLBACK_VECTOR=y
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
CONFIG_PVH=n
CONFIG_PARAVIRT_TIME_ACCOUNTING=n
CONFIG_PARAVIRT_CLOCK=y
CONFIG_M486SX=n
CONFIG_M486=n
CONFIG_M586=n
CONFIG_M586TSC=n
CONFIG_M586MMX=n
CONFIG_M686=y
CONFIG_MPENTIUMII=n
CONFIG_MPENTIUMIII=n
CONFIG_MPENTIUMM=n
CONFIG_MPENTIUM4=n
CONFIG_MK6=n
CONFIG_MK7=n
CONFIG_MK8=n
CONFIG_MCRUSOE=n
CONFIG_MEFFICEON=n
CONFIG_MWINCHIPC6=n
CONFIG_MWINCHIP3D=n
CONFIG_MELAN=n
CONFIG_MGEODEGX1=n
CONFIG_MGEODE_LX=n
CONFIG_MCYRIXIII=n
CONFIG_MVIAC3_2=n
CONFIG_MVIAC7=n
CONFIG_MCORE2=n
CONFIG_MATOM=n
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=6
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=n
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=n
CONFIG_CPU_SUP_HYGON=n
CONFIG_CPU_SUP_CENTAUR=n
CONFIG_CPU_SUP_TRANSMETA_32=n
CONFIG_CPU_SUP_UMC_32=n
CONFIG_CPU_SUP_ZHAOXIN=n
CONFIG_CPU_SUP_VORTEX_32=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=n
CONFIG_NR_CPUS_RANGE_BEGIN=2
CONFIG_NR_CPUS_RANGE_END=64
CONFIG_NR_CPUS_DEFAULT=32
CONFIG_NR_CPUS=32
CONFIG_SCHED_CLUSTER=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=n
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=n
CONFIG_X86_ANCIENT_MCE=y
CONFIG_X86_MCE_INJECT=y

#
# Performance monitoring
#
# end of Performance monitoring

CONFIG_X86_LEGACY_VM86=n
CONFIG_X86_IOPL_IOPERM=y
CONFIG_TOSHIBA=y
CONFIG_X86_REBOOTFIXUPS=n
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_NOHIGHMEM=n
CONFIG_HIGHMEM4G=y
CONFIG_HIGHMEM64G=n
CONFIG_VMSPLIT_3G=n
CONFIG_VMSPLIT_3G_OPT=y
CONFIG_VMSPLIT_2G=n
CONFIG_VMSPLIT_2G_OPT=n
CONFIG_VMSPLIT_1G=n
CONFIG_PAGE_OFFSET=0xB0000000
CONFIG_HIGHMEM=y
CONFIG_X86_CPA_STATISTICS=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=n
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=n
CONFIG_X86_PAT=n
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=n
CONFIG_X86_UMIP=y
CONFIG_CC_HAS_IBT=y
CONFIG_EFI=n
CONFIG_HZ_100=n
CONFIG_HZ_250=n
CONFIG_HZ_300=y
CONFIG_HZ_1000=n
CONFIG_HZ=300
CONFIG_KEXEC=n
CONFIG_CRASH_DUMP=n
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=n
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=n
CONFIG_DEBUG_HOTPLUG_CPU0=y
CONFIG_COMPAT_VDSO=n
CONFIG_CMDLINE_BOOL=n
CONFIG_MODIFY_LDT_SYSCALL=n
CONFIG_STRICT_SIGALTSTACK_SIZE=y
# end of Processor type and features

CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_SUSPEND_SKIP_SYNC=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=n
CONFIG_PM_WAKELOCKS=n
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=n
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_DPM_WATCHDOG=n
CONFIG_PM_TRACE_RTC=n
CONFIG_PM_CLK=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ENERGY_MODEL=y
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
CONFIG_ACPI_DEBUGGER=n
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=n
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_TAD=n
CONFIG_ACPI_DOCK=n
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=n
CONFIG_ACPI_THERMAL=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=n
CONFIG_ACPI_PCI_SLOT=n
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=n
CONFIG_ACPI_HED=n
CONFIG_ACPI_CUSTOM_METHOD=n
CONFIG_ACPI_REDUCED_HARDWARE_ONLY=n
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=n
CONFIG_ACPI_DPTF=n
CONFIG_ACPI_EXTLOG=n
CONFIG_ACPI_CONFIGFS=n
CONFIG_PMIC_OPREGION=n
CONFIG_X86_PM_TIMER=y
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
CONFIG_APM_IGNORE_USER_SUSPEND=n
CONFIG_APM_DO_ENABLE=n
CONFIG_APM_CPU_IDLE=n
CONFIG_APM_DISPLAY_BLANK=y
CONFIG_APM_ALLOW_INTS=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=n
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=n
CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=n
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=n
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
CONFIG_CPUFREQ_DT=n
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=n
CONFIG_X86_AMD_PSTATE=n
CONFIG_X86_ACPI_CPUFREQ=n
CONFIG_X86_POWERNOW_K6=y
CONFIG_X86_POWERNOW_K7=n
CONFIG_X86_GX_SUSPMOD=y
CONFIG_X86_SPEEDSTEP_CENTRINO=n
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=n
CONFIG_X86_P4_CLOCKMOD=y
CONFIG_X86_CPUFREQ_NFORCE2=n
CONFIG_X86_LONGRUN=n
CONFIG_X86_LONGHAUL=n
CONFIG_X86_E_POWERSAVER=n

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
# end of CPU Frequency scaling

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=n
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_GOV_TEO=n
CONFIG_CPU_IDLE_GOV_HALTPOLL=n
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle
# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
CONFIG_PCI_GOBIOS=n
CONFIG_PCI_GOMMCONFIG=n
CONFIG_PCI_GODIRECT=n
CONFIG_PCI_GOOLPC=y
CONFIG_PCI_GOANY=n
CONFIG_PCI_DIRECT=y
CONFIG_PCI_OLPC=y
CONFIG_PCI_CNB20LE_QUIRK=n
CONFIG_ISA_BUS=n
CONFIG_ISA_DMA_API=y
CONFIG_ISA=n
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
CONFIG_OLPC=y
CONFIG_OLPC_XO1_PM=y
CONFIG_OLPC_XO1_SCI=y
CONFIG_OLPC_XO15_SCI=n
CONFIG_ALIX=n
CONFIG_NET5501=n
# end of Bus options (PCI etc.)

#
# Binary Emulations
#
CONFIG_COMPAT_32=y
# end of Binary Emulations

CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=n
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y

#
# General architecture-dependent options
#
CONFIG_HOTPLUG_SMT=y
CONFIG_GENERIC_ENTRY=y
CONFIG_KPROBES=n
CONFIG_JUMP_LABEL=n
CONFIG_STATIC_CALL_SELFTEST=n
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
CONFIG_SECCOMP_CACHE_DEBUG=n
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=n
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ISA_BUS_API=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_LOCK_EVENT_COUNTS=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SPLIT_ARG64=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=n
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=n
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=n
CONFIG_MODVERSIONS=n
CONFIG_MODULE_SRCVERSION_ALL=n
CONFIG_MODULE_SIG=n
CONFIG_MODULE_COMPRESS_NONE=y
CONFIG_MODULE_COMPRESS_GZIP=n
CONFIG_MODULE_COMPRESS_XZ=n
CONFIG_MODULE_COMPRESS_ZSTD=n
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_TRIM_UNUSED_KSYMS=n
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=n
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=n
# end of Executable file formats

#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=n
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=n
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_SYSFS=y
CONFIG_CMA_AREAS=7
CONFIG_ZPOOL=y
CONFIG_ZBUD=n
CONFIG_Z3FOLD=n
CONFIG_ZSMALLOC=n
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_ARCH_HAS_ZONE_DMA_SET=y
CONFIG_ZONE_DMA=y
CONFIG_VMAP_PFN=y
CONFIG_PERCPU_STATS=n
CONFIG_GUP_TEST=n
CONFIG_READ_ONLY_THP_FOR_FS=y
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_MAPPING_DIRTY_HELPERS=y
CONFIG_KMAP_LOCAL=y

#
# Data Access Monitoring
#
CONFIG_DAMON=n
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=n
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=n
CONFIG_TLS=n
CONFIG_XFRM_USER=n
CONFIG_NET_KEY=n
CONFIG_XDP_SOCKETS=n
CONFIG_INET=y
CONFIG_IP_MULTICAST=n
CONFIG_IP_ADVANCED_ROUTER=n
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=n
CONFIG_IP_PNP_RARP=n
CONFIG_NET_IPIP=n
CONFIG_NET_IPGRE_DEMUX=n
CONFIG_NET_IP_TUNNEL=y
CONFIG_SYN_COOKIES=n
CONFIG_NET_IPVTI=n
CONFIG_NET_FOU=n
CONFIG_NET_FOU_IP_TUNNELS=n
CONFIG_INET_AH=n
CONFIG_INET_ESP=n
CONFIG_INET_IPCOMP=n
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=n
CONFIG_INET_RAW_DIAG=n
CONFIG_INET_DIAG_DESTROY=n
CONFIG_TCP_CONG_ADVANCED=n
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=n
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=n
CONFIG_IPV6_OPTIMISTIC_DAD=n
CONFIG_INET6_AH=n
CONFIG_INET6_ESP=n
CONFIG_INET6_IPCOMP=n
CONFIG_IPV6_MIP6=n
CONFIG_IPV6_VTI=n
CONFIG_IPV6_SIT=y
CONFIG_IPV6_SIT_6RD=n
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=n
CONFIG_IPV6_MULTIPLE_TABLES=n
CONFIG_IPV6_MROUTE=n
CONFIG_IPV6_SEG6_LWTUNNEL=n
CONFIG_IPV6_SEG6_HMAC=n
CONFIG_IPV6_RPL_LWTUNNEL=n
CONFIG_IPV6_IOAM6_LWTUNNEL=n
CONFIG_NETLABEL=n
CONFIG_MPTCP=n
CONFIG_NETWORK_SECMARK=n
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=n
CONFIG_NETFILTER=n
CONFIG_BPFILTER=n
CONFIG_IP_DCCP=n
CONFIG_IP_SCTP=n
CONFIG_RDS=n
CONFIG_TIPC=n
CONFIG_ATM=n
CONFIG_L2TP=n
CONFIG_BRIDGE=n
CONFIG_NET_DSA=n
CONFIG_VLAN_8021Q=n
CONFIG_DECNET=n
CONFIG_LLC2=n
CONFIG_ATALK=n
CONFIG_X25=n
CONFIG_LAPB=n
CONFIG_PHONET=n
CONFIG_6LOWPAN=n
CONFIG_IEEE802154=n
CONFIG_NET_SCHED=n
CONFIG_DCB=n
CONFIG_DNS_RESOLVER=m
CONFIG_BATMAN_ADV=n
CONFIG_OPENVSWITCH=n
CONFIG_VSOCKETS=n
CONFIG_NETLINK_DIAG=n
CONFIG_MPLS=n
CONFIG_NET_NSH=n
CONFIG_HSR=n
CONFIG_NET_SWITCHDEV=n
CONFIG_NET_L3_MASTER_DEV=n
CONFIG_QRTR=n
CONFIG_NET_NCSI=n
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=n
CONFIG_CGROUP_NET_CLASSID=n
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=n
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=n
CONFIG_NET_DROP_MONITOR=n
# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=n
CONFIG_CAN=n
CONFIG_BT=n
CONFIG_AF_RXRPC=n
CONFIG_AF_KCM=n
CONFIG_MCTP=n
CONFIG_WIRELESS=y
CONFIG_CFG80211=n

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=n
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NET_9P_DEBUG=n
CONFIG_CAIF=n
CONFIG_CEPH_LIB=n
CONFIG_NFC=n
CONFIG_PSAMPLE=n
CONFIG_NET_IFE=n
CONFIG_LWTUNNEL=n
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
CONFIG_PAGE_POOL_STATS=n
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=n
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=n
CONFIG_EISA_NAMES=y
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=n
CONFIG_PCIEAER=n
CONFIG_PCIEASPM=n
CONFIG_PCIE_PME=y
CONFIG_PCIE_PTM=n
CONFIG_PCI_MSI=n
CONFIG_PCI_QUIRKS=y
CONFIG_PCI_DEBUG=n
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=n
CONFIG_PCI_PF_STUB=y
CONFIG_PCI_ATS=y
CONFIG_PCI_ECAM=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
CONFIG_PCIE_BUS_TUNE_OFF=n
CONFIG_PCIE_BUS_DEFAULT=n
CONFIG_PCIE_BUS_SAFE=n
CONFIG_PCIE_BUS_PERFORMANCE=n
CONFIG_PCIE_BUS_PEER2PEER=y
CONFIG_VGA_ARB=n
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=n
CONFIG_HOTPLUG_PCI_CPCI=n
CONFIG_HOTPLUG_PCI_SHPC=n

#
# PCI controller drivers
#
CONFIG_PCI_FTPCI100=n
CONFIG_PCI_HOST_COMMON=y
CONFIG_PCI_HOST_GENERIC=y

#
# DesignWare PCI Core Support
#
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
CONFIG_PCIE_CADENCE=y
CONFIG_PCIE_CADENCE_HOST=y
CONFIG_PCIE_CADENCE_EP=y
CONFIG_PCIE_CADENCE_PLAT=y
CONFIG_PCIE_CADENCE_PLAT_HOST=y
CONFIG_PCIE_CADENCE_PLAT_EP=n
CONFIG_PCI_J721E=y
CONFIG_PCI_J721E_HOST=y
CONFIG_PCI_J721E_EP=y
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
CONFIG_PCI_EPF_TEST=n
CONFIG_PCI_EPF_NTB=y
# end of PCI Endpoint

#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=y
# end of PCI switch controller drivers

CONFIG_CXL_BUS=n
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=n
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=n
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=n
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
CONFIG_RAPIDIO_DMA_ENGINE=n
CONFIG_RAPIDIO_DEBUG=n
CONFIG_RAPIDIO_ENUM_BASIC=y
CONFIG_RAPIDIO_CHMAN=y
CONFIG_RAPIDIO_MPORT_CDEV=y

#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_CPS_XX=n
CONFIG_RAPIDIO_CPS_GEN2=y
CONFIG_RAPIDIO_RXS_GEN3=n
# end of RapidIO Switch drivers

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=n
CONFIG_DEVTMPFS_SAFE=n
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_CACHE=n
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
CONFIG_DEBUG_DRIVER=n
CONFIG_DEBUG_DEVRES=n
CONFIG_DEBUG_TEST_DRIVER_REMOVE=n
CONFIG_TEST_ASYNC_DRIVER_PROBE=n
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=y
CONFIG_REGMAP_SOUNDWIRE_MBQ=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=n
# end of Generic Driver Options

#
# Bus devices
#
CONFIG_MHI_BUS=y
CONFIG_MHI_BUS_DEBUG=y
CONFIG_MHI_BUS_PCI_GENERIC=y
CONFIG_MHI_BUS_EP=n
# end of Bus devices

CONFIG_CONNECTOR=n

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol

CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_FW_CFG_SYSFS=y
CONFIG_FW_CFG_SYSFS_CMDLINE=y
CONFIG_SYSFB=y
CONFIG_SYSFB_SIMPLEFB=n
CONFIG_CS_DSP=y
CONFIG_GOOGLE_FIRMWARE=y
CONFIG_GOOGLE_COREBOOT_TABLE=y
CONFIG_GOOGLE_MEMCONSOLE=y
CONFIG_GOOGLE_MEMCONSOLE_COREBOOT=y
CONFIG_GOOGLE_VPD=y

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=y
CONFIG_GNSS_MTK_SERIAL=n
CONFIG_GNSS_SIRF_SERIAL=y
CONFIG_GNSS_UBX_SERIAL=y
CONFIG_MTD=y
CONFIG_MTD_TESTS=n

#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=y
CONFIG_MTD_CMDLINE_PARTS=n
CONFIG_MTD_OF_PARTS=n
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=n
CONFIG_MTD_REDBOOT_PARTS_READONLY=n
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_OOPS=y
CONFIG_MTD_PARTITIONED_MASTER=n

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=n
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_OF=n
CONFIG_MTD_PHYSMAP_GPIO_ADDR=n
CONFIG_MTD_SBC_GXX=n
CONFIG_MTD_SCx200_DOCFLASH=n
CONFIG_MTD_AMD76XROM=n
CONFIG_MTD_ICHXROM=y
CONFIG_MTD_ESB2ROM=y
CONFIG_MTD_CK804XROM=y
CONFIG_MTD_SCB2_FLASH=y
CONFIG_MTD_NETtel=n
CONFIG_MTD_L440GX=n
CONFIG_MTD_PCI=n
CONFIG_MTD_PCMCIA=y
CONFIG_MTD_PCMCIA_ANONYMOUS=n
CONFIG_MTD_INTEL_VR_NOR=n
CONFIG_MTD_PLATRAM=y
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=n
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=n
# end of Self-contained MTD device drivers

#
# NAND
#
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=n
CONFIG_MTD_ONENAND_GENERIC=y
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_RAW_NAND=n

#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=n
CONFIG_MTD_NAND_ECC_SW_BCH=y
CONFIG_MTD_NAND_ECC_MXIC=n
# end of ECC engine support
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=n
# end of LPDDR & LPDDR2 PCM memory drivers

CONFIG_MTD_UBI=n
CONFIG_MTD_HYPERBUS=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=n
CONFIG_OF_PROMTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_OVERLAY=n
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=n
CONFIG_PARPORT_PC_FIFO=n
CONFIG_PARPORT_PC_SUPERIO=n
CONFIG_PARPORT_PC_PCMCIA=n
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y

#
# NVME Support
#
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_DUMMY_IRQ=y
CONFIG_IBM_ASM=n
CONFIG_PHANTOM=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
CONFIG_CS5535_CLOCK_EVENT_SRC=n
CONFIG_HP_ILO=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=n
CONFIG_SENSORS_TSL2550=n
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
CONFIG_VMWARE_BALLOON=n
CONFIG_PCH_PHUB=y
CONFIG_SRAM=y
CONFIG_DW_XDATA_PCIE=n
CONFIG_PCI_ENDPOINT_TEST=n
CONFIG_XILINX_SDFEC=y
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_IDT_89HPESX=y
CONFIG_EEPROM_EE1004=n
# end of EEPROM support

CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=n
# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_I2C=y
CONFIG_ALTERA_STAPL=y
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
CONFIG_INTEL_MEI_TXE=y
CONFIG_INTEL_MEI_HDCP=y
CONFIG_INTEL_MEI_PXP=y
CONFIG_VMWARE_VMCI=y
CONFIG_ECHO=y
CONFIG_MISC_ALCOR_PCI=n
CONFIG_MISC_RTSX_PCI=n
CONFIG_HABANA_AI=y
CONFIG_UACCE=y
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=n
CONFIG_PVPANIC_PCI=n
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# end of SCSI device support

CONFIG_FUSION=n

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_NET=n
CONFIG_FIREWIRE_NOSY=n
# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=n
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=n
CONFIG_DUMMY=n
CONFIG_WIREGUARD=n
CONFIG_EQUALIZER=n
CONFIG_NET_TEAM=n
CONFIG_MACVLAN=n
CONFIG_IPVLAN=n
CONFIG_VXLAN=n
CONFIG_GENEVE=n
CONFIG_BAREUDP=n
CONFIG_GTP=n
CONFIG_MACSEC=n
CONFIG_NETCONSOLE=n
CONFIG_NTB_NETDEV=n
CONFIG_RIONET=n
CONFIG_TUN=n
CONFIG_TUN_VNET_CROSS_LE=n
CONFIG_VETH=n
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=n
CONFIG_MHI_NET=n
CONFIG_ARCNET=n
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL3=n
CONFIG_PCMCIA_3C574=n
CONFIG_PCMCIA_3C589=n
CONFIG_VORTEX=n
CONFIG_TYPHOON=n
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=n
CONFIG_NET_VENDOR_AGERE=y
CONFIG_ET131X=n
CONFIG_NET_VENDOR_ALACRITECH=y
CONFIG_SLICOSS=n
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=n
CONFIG_ALTERA_TSE=n
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AMD=n
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_AQTION=n
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=n
CONFIG_ATL1=n
CONFIG_ATL1E=n
CONFIG_ATL1C=n
CONFIG_ALX=n
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=n
CONFIG_BCMGENET=n
CONFIG_BNX2=n
CONFIG_CNIC=n
CONFIG_TIGON3=n
CONFIG_BNX2X=n
CONFIG_SYSTEMPORT=n
CONFIG_BNXT=n
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=n
CONFIG_NET_VENDOR_CADENCE=y
CONFIG_MACB=n
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=n
CONFIG_CHELSIO_T3=n
CONFIG_CHELSIO_T4=n
CONFIG_CHELSIO_T4VF=n
CONFIG_NET_VENDOR_CIRRUS=y
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=n
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_GEMINI_ETHERNET=n
CONFIG_CX_ECAT=n
CONFIG_NET_VENDOR_DAVICOM=y
CONFIG_DNET=n
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=n
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=n
CONFIG_SUNDANCE=n
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=n
CONFIG_NET_VENDOR_ENGLEDER=y
CONFIG_TSNEP=n
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=n
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_PCMCIA_FMVJ18X=n
CONFIG_NET_VENDOR_FUNGIBLE=y
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=n
CONFIG_E1000=y
CONFIG_E1000E=n
CONFIG_IGB=n
CONFIG_IGBVF=n
CONFIG_IXGB=n
CONFIG_IXGBE=n
CONFIG_I40E=n
CONFIG_IGC=n
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_JME=n
CONFIG_NET_VENDOR_LITEX=y
CONFIG_LITEX_LITEETH=n
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=n
CONFIG_SKGE=n
CONFIG_SKY2=n
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=n
CONFIG_MLX5_CORE=n
CONFIG_MLXSW_CORE=n
CONFIG_MLXFW=n
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=n
CONFIG_KS8851_MLL=n
CONFIG_KSZ884X_PCI=n
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_LAN743X=n
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=n
CONFIG_FEALNX=n
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=n
CONFIG_NS83820=n
CONFIG_NET_VENDOR_NETERION=y
CONFIG_S2IO=n
CONFIG_VXGE=n
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_NI=y
CONFIG_NI_XGE_MANAGEMENT_ENET=n
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=n
CONFIG_NE2K_PCI=n
CONFIG_PCMCIA_PCNET=n
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=n
CONFIG_NET_VENDOR_OKI=y
CONFIG_PCH_GBE=n
CONFIG_ETHOC=n
CONFIG_NET_VENDOR_PACKET_ENGINES=y
CONFIG_HAMACHI=n
CONFIG_YELLOWFIN=n
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=n
CONFIG_QLCNIC=n
CONFIG_NETXEN_NIC=n
CONFIG_QED=n
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_QCA7000_UART=n
CONFIG_QCOM_EMAC=n
CONFIG_RMNET=n
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=n
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_ATP=n
CONFIG_8139CP=n
CONFIG_8139TOO=n
CONFIG_R8169=n
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
CONFIG_SXGBE_ETH=n
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=n
CONFIG_SFC_FALCON=n
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=n
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=n
CONFIG_SIS190=n
CONFIG_NET_VENDOR_SMSC=y
CONFIG_PCMCIA_SMC91C92=n
CONFIG_EPIC100=n
CONFIG_SMSC911X=n
CONFIG_SMSC9420=n
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=n
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=n
CONFIG_SUNGEM=n
CONFIG_CASSINI=n
CONFIG_NIU=n
CONFIG_NET_VENDOR_SYNOPSYS=y
CONFIG_DWC_XLGMAC=n
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=n
CONFIG_NET_VENDOR_TI=y
CONFIG_TI_CPSW_PHY_SEL=n
CONFIG_TLAN=n
CONFIG_NET_VENDOR_VERTEXCOM=y
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=n
CONFIG_VIA_VELOCITY=n
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=n
CONFIG_WIZNET_W5300=n
CONFIG_NET_VENDOR_XILINX=y
CONFIG_XILINX_EMACLITE=n
CONFIG_XILINX_AXI_EMAC=n
CONFIG_XILINX_LL_TEMAC=n
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=n
CONFIG_FDDI=n
CONFIG_HIPPI=n
CONFIG_NET_SB1000=n
CONFIG_PHYLIB=n
CONFIG_MDIO_DEVICE=n

#
# PCS device drivers
#
# end of PCS device drivers

CONFIG_PLIP=n
CONFIG_PPP=n
CONFIG_SLIP=n

#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_WLAN_VENDOR_ATH=y
CONFIG_ATH_DEBUG=n
CONFIG_ATH5K_PCI=n
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_IWLMEI=n
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=n
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
CONFIG_PCMCIA_RAYCS=n
CONFIG_WAN=n

#
# Wireless WAN
#
CONFIG_WWAN=n
# end of Wireless WAN

CONFIG_VMXNET3=n
CONFIG_FUJITSU_ES=n
CONFIG_USB4_NET=n
CONFIG_NETDEVSIM=n
CONFIG_NET_FAILOVER=m
CONFIG_ISDN=n

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=n
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5520=n
CONFIG_KEYBOARD_ADP5588=n
CONFIG_KEYBOARD_ADP5589=n
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1050=n
CONFIG_KEYBOARD_QT1070=n
CONFIG_KEYBOARD_QT2160=n
CONFIG_KEYBOARD_DLINK_DIR685=n
CONFIG_KEYBOARD_LKKBD=n
CONFIG_KEYBOARD_GPIO=n
CONFIG_KEYBOARD_GPIO_POLLED=n
CONFIG_KEYBOARD_TCA6416=n
CONFIG_KEYBOARD_TCA8418=n
CONFIG_KEYBOARD_MATRIX=n
CONFIG_KEYBOARD_LM8323=n
CONFIG_KEYBOARD_LM8333=n
CONFIG_KEYBOARD_MAX7359=n
CONFIG_KEYBOARD_MCS=n
CONFIG_KEYBOARD_MPR121=n
CONFIG_KEYBOARD_NEWTON=n
CONFIG_KEYBOARD_OPENCORES=n
CONFIG_KEYBOARD_SAMSUNG=n
CONFIG_KEYBOARD_GOLDFISH_EVENTS=n
CONFIG_KEYBOARD_STOWAWAY=n
CONFIG_KEYBOARD_SUNKBD=n
CONFIG_KEYBOARD_IQS62X=n
CONFIG_KEYBOARD_OMAP4=n
CONFIG_KEYBOARD_TC3589X=n
CONFIG_KEYBOARD_TM2_TOUCHKEY=n
CONFIG_KEYBOARD_TWL4030=n
CONFIG_KEYBOARD_XTKBD=n
CONFIG_KEYBOARD_CAP11XX=n
CONFIG_KEYBOARD_BCM=n
CONFIG_KEYBOARD_MTK_PMIC=n
CONFIG_KEYBOARD_CYPRESS_SF=n
CONFIG_INPUT_MOUSE=n
CONFIG_INPUT_JOYSTICK=n
CONFIG_INPUT_TABLET=n
CONFIG_INPUT_TOUCHSCREEN=n
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=n
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
CONFIG_INPUT_ATC260X_ONKEY=n
CONFIG_INPUT_ATMEL_CAPTOUCH=y
CONFIG_INPUT_BMA150=y
CONFIG_INPUT_E3X0_BUTTON=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_MAX8925_ONKEY=y
CONFIG_INPUT_MAX8997_HAPTIC=y
CONFIG_INPUT_MC13783_PWRBUTTON=n
CONFIG_INPUT_MMA8450=y
CONFIG_INPUT_APANEL=n
CONFIG_INPUT_GPIO_BEEPER=y
CONFIG_INPUT_GPIO_DECODER=y
CONFIG_INPUT_GPIO_VIBRA=y
CONFIG_INPUT_WISTRON_BTNS=n
CONFIG_INPUT_ATLAS_BTNS=n
CONFIG_INPUT_ATI_REMOTE2=n
CONFIG_INPUT_KEYSPAN_REMOTE=n
CONFIG_INPUT_KXTJ9=y
CONFIG_INPUT_POWERMATE=n
CONFIG_INPUT_YEALINK=n
CONFIG_INPUT_CM109=n
CONFIG_INPUT_REGULATOR_HAPTIC=n
CONFIG_INPUT_RETU_PWRBUTTON=n
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_INPUT_TWL4030_VIBRA=y
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PCF50633_PMU=n
CONFIG_INPUT_PCF8574=n
CONFIG_INPUT_PWM_BEEPER=n
CONFIG_INPUT_PWM_VIBRA=n
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
CONFIG_INPUT_DA7280_HAPTICS=y
CONFIG_INPUT_DA9052_ONKEY=n
CONFIG_INPUT_DA9055_ONKEY=y
CONFIG_INPUT_DA9063_ONKEY=y
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_ADXL34X=y
CONFIG_INPUT_ADXL34X_I2C=y
CONFIG_INPUT_IQS269A=n
CONFIG_INPUT_IQS626A=n
CONFIG_INPUT_CMA3000=n
CONFIG_INPUT_IDEAPAD_SLIDEBAR=y
CONFIG_INPUT_DRV260X_HAPTICS=y
CONFIG_INPUT_DRV2665_HAPTICS=n
CONFIG_INPUT_DRV2667_HAPTICS=y
CONFIG_INPUT_STPMIC1_ONKEY=n
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
CONFIG_RMI4_SMB=y
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=n
CONFIG_RMI4_F3A=y
CONFIG_RMI4_F55=n

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=n
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=n
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=n
CONFIG_GAMEPORT_L4=n
CONFIG_GAMEPORT_EMU10K1=n
CONFIG_GAMEPORT_FM801=n
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=n
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=n
CONFIG_LDISC_AUTOLOAD=n

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_16550A_VARIANTS=n
CONFIG_SERIAL_8250_FINTEK=n
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_CS=n
CONFIG_SERIAL_8250_MEN_MCB=n
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=n
CONFIG_SERIAL_8250_ASPEED_VUART=n
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_DW=n
CONFIG_SERIAL_8250_RT288X=n
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
CONFIG_SERIAL_8250_PERICOM=y
CONFIG_SERIAL_OF_PLATFORM=n

#
# Non-8250 serial port support
#
CONFIG_SERIAL_UARTLITE=n
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=n
CONFIG_SERIAL_SIFIVE=y
CONFIG_SERIAL_SIFIVE_CONSOLE=y
CONFIG_SERIAL_LANTIQ=y
CONFIG_SERIAL_LANTIQ_CONSOLE=n
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=n
CONFIG_SERIAL_SC16IS7XX_CORE=y
CONFIG_SERIAL_SC16IS7XX=y
CONFIG_SERIAL_SC16IS7XX_I2C=y
CONFIG_SERIAL_TIMBERDALE=n
CONFIG_SERIAL_BCM63XX=n
CONFIG_SERIAL_ALTERA_JTAGUART=n
CONFIG_SERIAL_ALTERA_UART=n
CONFIG_SERIAL_PCH_UART=y
CONFIG_SERIAL_PCH_UART_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=n
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_SERIAL_FSL_LINFLEXUART=n
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
CONFIG_SERIAL_MEN_Z135=y
CONFIG_SERIAL_SPRD=y
CONFIG_SERIAL_SPRD_CONSOLE=y
CONFIG_SERIAL_LITEUART=y
CONFIG_SERIAL_LITEUART_MAX_PORTS=1
CONFIG_SERIAL_LITEUART_CONSOLE=y
CONFIG_SERIAL_SUNPLUS=n
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=n
CONFIG_GOLDFISH_TTY=n
CONFIG_N_GSM=n
CONFIG_NOZOMI=y
CONFIG_NULL_TTY=n
CONFIG_RPMSG_TTY=n
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=n
CONFIG_TTY_PRINTK=y
CONFIG_TTY_PRINTK_LEVEL=6
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
CONFIG_VIRTIO_CONSOLE=n
CONFIG_IPMI_HANDLER=n
CONFIG_IPMB_DEVICE_INTERFACE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=n
CONFIG_HW_RANDOM_AMD=n
CONFIG_HW_RANDOM_BA431=n
CONFIG_HW_RANDOM_GEODE=n
CONFIG_HW_RANDOM_VIA=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_CCTRNG=y
CONFIG_HW_RANDOM_XIPHERA=y
CONFIG_APPLICOM=y
CONFIG_SONYPI=n

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=n
CONFIG_CARDMAN_4000=n
CONFIG_CARDMAN_4040=y
CONFIG_SCR24X=n
CONFIG_IPWIRELESS=n
# end of PCMCIA character devices

CONFIG_MWAVE=n
CONFIG_SCx200_GPIO=y
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
CONFIG_DEVMEM=y
CONFIG_NVRAM=n
CONFIG_DEVPORT=n
CONFIG_HPET=n
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=n
CONFIG_TCG_TIS=n
CONFIG_TCG_TIS_I2C_CR50=y
CONFIG_TCG_TIS_I2C_ATMEL=y
CONFIG_TCG_TIS_I2C_INFINEON=n
CONFIG_TCG_TIS_I2C_NUVOTON=n
CONFIG_TCG_NSC=n
CONFIG_TCG_ATMEL=y
CONFIG_TCG_INFINEON=n
CONFIG_TCG_CRB=n
CONFIG_TCG_VTPM_PROXY=n
CONFIG_TCG_TIS_ST33ZP24_I2C=n
CONFIG_TELCLOCK=y
CONFIG_XILLYBUS_CLASS=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_OF=n
CONFIG_RANDOM_TRUST_CPU=n
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=n
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_GPMUX=y
CONFIG_I2C_MUX_LTC4306=y
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=n
CONFIG_I2C_MUX_REG=y
CONFIG_I2C_DEMUX_PINCTRL=y
CONFIG_I2C_MUX_MLXCPLD=y
# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=n
CONFIG_I2C_SMBUS=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
# end of I2C Algorithms

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=y
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=n
CONFIG_I2C_AMD8111=n
CONFIG_I2C_AMD_MP2=n
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=n
CONFIG_I2C_ISMT=n
CONFIG_I2C_PIIX4=n
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_NFORCE2_S4985=y
CONFIG_I2C_NVIDIA_GPU=n
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=n
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y

#
# ACPI drivers
#
CONFIG_I2C_SCMI=n

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_SLAVE=n
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DESIGNWARE_AMDPSP=n
CONFIG_I2C_DESIGNWARE_BAYTRAIL=n
CONFIG_I2C_DESIGNWARE_PCI=y
CONFIG_I2C_EG20T=n
CONFIG_I2C_EMEV2=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_GPIO_FAULT_INJECTOR=n
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_PXA=y
CONFIG_I2C_PXA_PCI=y
CONFIG_I2C_RK3X=n
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=n

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=n
CONFIG_I2C_TAOS_EVM=y

#
# Other I2C/SMBus bus drivers
#
CONFIG_SCx200_ACB=y
CONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support

CONFIG_I2C_STUB=n
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
CONFIG_I2C_SLAVE_TESTUNIT=y
CONFIG_I2C_DEBUG_CORE=n
CONFIG_I2C_DEBUG_ALGO=n
CONFIG_I2C_DEBUG_BUS=n
# end of I2C support

CONFIG_I3C=n
CONFIG_SPI=n
CONFIG_SPMI=n
CONFIG_HSI=n
CONFIG_PPS=y
CONFIG_PPS_DEBUG=n

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_LDISC=y
CONFIG_PPS_CLIENT_PARPORT=y
CONFIG_PPS_CLIENT_GPIO=y

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=n
CONFIG_PTP_1588_CLOCK_KVM=y
CONFIG_PTP_1588_CLOCK_IDT82P33=n
CONFIG_PTP_1588_CLOCK_IDTCM=n
CONFIG_PTP_1588_CLOCK_VMW=n
CONFIG_PTP_1588_CLOCK_OCP=n
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=n
CONFIG_PINCTRL_AMD=n
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_EQUILIBRIUM=y
CONFIG_PINCTRL_MCP23S08=n
CONFIG_PINCTRL_MICROCHIP_SGPIO=y
CONFIG_PINCTRL_OCELOT=n
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_STMFX=n
CONFIG_PINCTRL_SX150X=n
CONFIG_PINCTRL_LOCHNAGAR=n
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L15=y
CONFIG_PINCTRL_CS47L90=y

#
# Intel pinctrl drivers
#
CONFIG_PINCTRL_BAYTRAIL=n
CONFIG_PINCTRL_CHERRYVIEW=n
CONFIG_PINCTRL_LYNXPOINT=n
CONFIG_PINCTRL_ALDERLAKE=n
CONFIG_PINCTRL_BROXTON=n
CONFIG_PINCTRL_CANNONLAKE=n
CONFIG_PINCTRL_CEDARFORK=n
CONFIG_PINCTRL_DENVERTON=n
CONFIG_PINCTRL_ELKHARTLAKE=n
CONFIG_PINCTRL_EMMITSBURG=n
CONFIG_PINCTRL_GEMINILAKE=n
CONFIG_PINCTRL_ICELAKE=n
CONFIG_PINCTRL_JASPERLAKE=n
CONFIG_PINCTRL_LAKEFIELD=n
CONFIG_PINCTRL_LEWISBURG=n
CONFIG_PINCTRL_SUNRISEPOINT=n
CONFIG_PINCTRL_TIGERLAKE=n
# end of Intel pinctrl drivers

#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers

CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=n
CONFIG_GPIO_GENERIC=y

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
CONFIG_GPIO_AMDPT=n
CONFIG_GPIO_CADENCE=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_EXAR=n
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=n
CONFIG_GPIO_GRGPIO=y
CONFIG_GPIO_HLWD=y
CONFIG_GPIO_ICH=y
CONFIG_GPIO_LOGICVC=y
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_MENZ127=y
CONFIG_GPIO_SAMA5D2_PIOBU=y
CONFIG_GPIO_SIFIVE=y
CONFIG_GPIO_SIOX=n
CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_VX855=y
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_AMD_FCH=y
# end of Memory mapped GPIO drivers

#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_F7188X=y
CONFIG_GPIO_IT87=n
CONFIG_GPIO_SCH=n
CONFIG_GPIO_SCH311X=y
CONFIG_GPIO_WINBOND=n
CONFIG_GPIO_WS16C48=y
# end of Port-mapped I/O GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=n
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_GW_PLD=n
CONFIG_GPIO_MAX7300=n
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_MAX732X_IRQ=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=n
CONFIG_GPIO_PCA9570=n
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=n
CONFIG_GPIO_BD71815=n
CONFIG_GPIO_BD71828=y
CONFIG_GPIO_CS5535=y
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_JANZ_TTL=y
CONFIG_GPIO_LP3943=n
CONFIG_GPIO_MADERA=y
CONFIG_GPIO_TC3589X=n
CONFIG_GPIO_TIMBERDALE=y
CONFIG_GPIO_TPS65086=y
CONFIG_GPIO_TPS6586X=n
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=y
CONFIG_GPIO_BT8XX=y
CONFIG_GPIO_ML_IOH=n
CONFIG_GPIO_PCH=y
CONFIG_GPIO_PCI_IDIO_16=y
CONFIG_GPIO_PCIE_IDIO_24=y
CONFIG_GPIO_RDC321X=y
CONFIG_GPIO_SODAVILLE=y
# end of PCI GPIO expanders

#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=y
CONFIG_GPIO_MOCKUP=y
CONFIG_GPIO_VIRTIO=y
CONFIG_GPIO_SIM=n
# end of Virtual GPIO drivers

CONFIG_W1=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_DS1WM=n
CONFIG_W1_MASTER_GPIO=y
CONFIG_W1_MASTER_SGI=y
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=n
CONFIG_W1_SLAVE_DS2405=n
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=n
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2805=y
CONFIG_W1_SLAVE_DS2430=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=n
CONFIG_W1_SLAVE_DS2438=n
CONFIG_W1_SLAVE_DS250X=y
CONFIG_W1_SLAVE_DS2780=n
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_DS28E17=n
# end of 1-wire Slaves

CONFIG_POWER_RESET=n
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=n
CONFIG_POWER_SUPPLY_HWMON=y
CONFIG_PDA_POWER=y
CONFIG_IP5XXX_POWER=n
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
CONFIG_WM8350_POWER=y
CONFIG_TEST_POWER=n
CONFIG_BATTERY_88PM860X=y
CONFIG_CHARGER_ADP5061=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_CW2015=n
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=n
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=n
CONFIG_BATTERY_OLPC=y
CONFIG_BATTERY_SAMSUNG_SDI=n
CONFIG_BATTERY_SBS=n
CONFIG_CHARGER_SBS=y
CONFIG_MANAGER_SBS=y
CONFIG_BATTERY_BQ27XXX=n
CONFIG_BATTERY_DA9052=y
CONFIG_BATTERY_DA9150=n
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_MAX1721X=y
CONFIG_CHARGER_88PM860X=n
CONFIG_CHARGER_PCF50633=y
CONFIG_CHARGER_MAX8903=n
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_GPIO=n
CONFIG_CHARGER_MANAGER=n
CONFIG_CHARGER_LT3651=n
CONFIG_CHARGER_LTC4162L=y
CONFIG_CHARGER_DETECTOR_MAX14656=n
CONFIG_CHARGER_MAX77976=n
CONFIG_CHARGER_MAX8997=y
CONFIG_CHARGER_MT6360=y
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
CONFIG_CHARGER_BQ24257=n
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ2515X=y
CONFIG_CHARGER_BQ25890=n
CONFIG_CHARGER_BQ25980=n
CONFIG_CHARGER_BQ256XX=y
CONFIG_CHARGER_SMB347=y
CONFIG_CHARGER_TPS65090=y
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_GOLDFISH=y
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
CONFIG_CHARGER_UCS1002=y
CONFIG_CHARGER_BD99954=n
CONFIG_BATTERY_UG3105=n
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=n

#
# Native drivers
#
CONFIG_SENSORS_AD7414=n
CONFIG_SENSORS_AD7418=n
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=n
CONFIG_SENSORS_ADM1031=n
CONFIG_SENSORS_ADM1177=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=n
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_AHT10=y
CONFIG_SENSORS_AS370=n
CONFIG_SENSORS_ASC7621=n
CONFIG_SENSORS_AXI_FAN_CONTROL=y
CONFIG_SENSORS_K8TEMP=n
CONFIG_SENSORS_APPLESMC=y
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ASPEED=y
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_CORSAIR_CPRO=y
CONFIG_SENSORS_CORSAIR_PSU=y
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DELL_SMM=y
CONFIG_I8K=y
CONFIG_SENSORS_DA9052_ADC=n
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_I5K_AMB=n
CONFIG_SENSORS_F71805F=n
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_MC13783_ADC=y
CONFIG_SENSORS_FSCHMD=n
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_G762=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_I5500=n
CONFIG_SENSORS_CORETEMP=n
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=n
CONFIG_SENSORS_POWR1220=n
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LOCHNAGAR=y
CONFIG_SENSORS_LTC2945=n
CONFIG_SENSORS_LTC2947=y
CONFIG_SENSORS_LTC2947_I2C=y
CONFIG_SENSORS_LTC2990=y
CONFIG_SENSORS_LTC2992=y
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
CONFIG_SENSORS_LTC4245=n
CONFIG_SENSORS_LTC4260=y
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX127=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=n
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX31730=n
CONFIG_SENSORS_MAX6620=n
CONFIG_SENSORS_MAX6621=y
CONFIG_SENSORS_MAX6639=n
CONFIG_SENSORS_MAX6642=n
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_MAX31790=y
CONFIG_SENSORS_MCP3021=n
CONFIG_SENSORS_MLXREG_FAN=y
CONFIG_SENSORS_TC654=y
CONFIG_SENSORS_TPS23861=y
CONFIG_SENSORS_MR75203=n
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=n
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=n
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LM95234=n
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=n
CONFIG_SENSORS_PC87360=n
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NCT6683=n
CONFIG_SENSORS_NCT6775=n
CONFIG_SENSORS_NCT7802=y
CONFIG_SENSORS_NPCM7XX=n
CONFIG_SENSORS_PCF8591=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=n
CONFIG_SENSORS_ADM1266=y
CONFIG_SENSORS_ADM1275=n
CONFIG_SENSORS_BEL_PFE=y
CONFIG_SENSORS_BPA_RS600=y
CONFIG_SENSORS_DELTA_AHE50DC_FAN=y
CONFIG_SENSORS_FSP_3Y=y
CONFIG_SENSORS_IBM_CFFPS=n
CONFIG_SENSORS_DPS920AB=y
CONFIG_SENSORS_INSPUR_IPSPS=n
CONFIG_SENSORS_IR35221=y
CONFIG_SENSORS_IR36021=y
CONFIG_SENSORS_IR38064=y
CONFIG_SENSORS_IR38064_REGULATOR=n
CONFIG_SENSORS_IRPS5401=n
CONFIG_SENSORS_ISL68137=y
CONFIG_SENSORS_LM25066=n
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=y
CONFIG_SENSORS_MAX15301=y
CONFIG_SENSORS_MAX16064=n
CONFIG_SENSORS_MAX16601=y
CONFIG_SENSORS_MAX20730=y
CONFIG_SENSORS_MAX20751=n
CONFIG_SENSORS_MAX31785=y
CONFIG_SENSORS_MAX34440=y
CONFIG_SENSORS_MAX8688=y
CONFIG_SENSORS_MP2888=y
CONFIG_SENSORS_MP2975=y
CONFIG_SENSORS_MP5023=y
CONFIG_SENSORS_PIM4328=n
CONFIG_SENSORS_PLI1209BC=n
CONFIG_SENSORS_PM6764TR=y
CONFIG_SENSORS_PXE1610=y
CONFIG_SENSORS_Q54SJ108A2=y
CONFIG_SENSORS_STPDDC60=y
CONFIG_SENSORS_TPS40422=n
CONFIG_SENSORS_TPS53679=y
CONFIG_SENSORS_UCD9000=y
CONFIG_SENSORS_UCD9200=n
CONFIG_SENSORS_XDPE122=y
CONFIG_SENSORS_XDPE122_REGULATOR=n
CONFIG_SENSORS_ZL6100=n
CONFIG_SENSORS_PWM_FAN=n
CONFIG_SENSORS_SBTSI=y
CONFIG_SENSORS_SBRMI=y
CONFIG_SENSORS_SHT15=n
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SHT3x=n
CONFIG_SENSORS_SHT4x=n
CONFIG_SENSORS_SHTC1=n
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_SY7636A=n
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=n
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=n
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_STTS751=y
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_AMC6821=y
CONFIG_SENSORS_INA209=y
CONFIG_SENSORS_INA2XX=n
CONFIG_SENSORS_INA238=y
CONFIG_SENSORS_INA3221=n
CONFIG_SENSORS_TC74=n
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP103=y
CONFIG_SENSORS_TMP108=y
CONFIG_SENSORS_TMP401=n
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_TMP464=n
CONFIG_SENSORS_TMP513=y
CONFIG_SENSORS_VIA_CPUTEMP=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=n
CONFIG_SENSORS_VT8231=n
CONFIG_SENSORS_W83773G=n
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
CONFIG_SENSORS_W83795_FANCTRL=n
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_WM8350=y

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=n
CONFIG_SENSORS_ATK0110=n
CONFIG_SENSORS_ASUS_EC=n
CONFIG_THERMAL=y
CONFIG_THERMAL_NETLINK=n
CONFIG_THERMAL_STATISTICS=n
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=n
CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=n
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=n
CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR=y
CONFIG_THERMAL_GOV_FAIR_SHARE=n
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=n
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=n
CONFIG_DEVFREQ_THERMAL=y
CONFIG_THERMAL_EMULATION=n
CONFIG_THERMAL_MMIO=n

#
# Intel thermal drivers
#
CONFIG_INTEL_SOC_DTS_THERMAL=n

#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers

CONFIG_INTEL_PCH_THERMAL=y
CONFIG_INTEL_TCC_COOLING=n
CONFIG_INTEL_MENLOW=n
# end of Intel thermal drivers

CONFIG_WATCHDOG=n
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=n
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=n
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_DRIVER_GPIO=n
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=n
CONFIG_BCMA_HOST_SOC=n
CONFIG_BCMA_DRIVER_PCI=n
CONFIG_BCMA_DRIVER_GMAC_CMN=n
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=n
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=n
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_BD9571MWV=n
CONFIG_MFD_AXP20X_I2C=n
CONFIG_MFD_MADERA=y
CONFIG_MFD_MADERA_I2C=y
CONFIG_MFD_CS47L15=y
CONFIG_MFD_CS47L35=n
CONFIG_MFD_CS47L85=n
CONFIG_MFD_CS47L90=y
CONFIG_MFD_CS47L92=n
CONFIG_PMIC_DA903X=n
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=n
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
CONFIG_MFD_GATEWORKS_GSC=n
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_MP2629=y
CONFIG_MFD_HI6421_PMIC=n
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=y
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
CONFIG_INTEL_SOC_PMIC=n
CONFIG_INTEL_SOC_PMIC_CHTWC=n
CONFIG_INTEL_SOC_PMIC_CHTDC_TI=n
CONFIG_INTEL_SOC_PMIC_MRFLD=n
CONFIG_MFD_INTEL_LPSS_ACPI=n
CONFIG_MFD_INTEL_LPSS_PCI=n
CONFIG_MFD_INTEL_PMC_BXT=n
CONFIG_MFD_IQS62X=y
CONFIG_MFD_JANZ_CMODIO=y
CONFIG_MFD_KEMPLD=n
CONFIG_MFD_88PM800=n
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=n
CONFIG_MFD_MAX77620=n
CONFIG_MFD_MAX77650=n
CONFIG_MFD_MAX77686=n
CONFIG_MFD_MAX77693=n
CONFIG_MFD_MAX77714=n
CONFIG_MFD_MAX77843=n
CONFIG_MFD_MAX8907=n
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=n
CONFIG_MFD_MT6360=y
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=n
CONFIG_MFD_NTXEC=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=n
CONFIG_MFD_RDC321X=y
CONFIG_MFD_RT4831=n
CONFIG_MFD_RT5033=y
CONFIG_MFD_RC5T583=n
CONFIG_MFD_RK808=n
CONFIG_MFD_RN5T618=y
CONFIG_MFD_SEC_CORE=n
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SIMPLE_MFD_I2C=n
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=n
CONFIG_MFD_SKY81452=y
CONFIG_MFD_STMPE=n
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=n
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=n
CONFIG_MFD_TI_LMU=y
CONFIG_MFD_PALMAS=n
CONFIG_TPS6105X=n
CONFIG_TPS65010=n
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=n
CONFIG_MFD_TI_LP873X=n
CONFIG_MFD_TI_LP87565=n
CONFIG_MFD_TPS65218=n
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=n
CONFIG_MFD_TPS65912_I2C=n
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=n
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=n
CONFIG_MFD_TIMBERDALE=y
CONFIG_MFD_TC3589X=y
CONFIG_MFD_TQMX86=n
CONFIG_MFD_VX855=y
CONFIG_MFD_LOCHNAGAR=y
CONFIG_MFD_ARIZONA_I2C=n
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=n
CONFIG_MFD_ROHM_BD718XX=n
CONFIG_MFD_ROHM_BD71828=y
CONFIG_MFD_ROHM_BD957XMUF=y
CONFIG_MFD_STPMIC1=y
CONFIG_MFD_STMFX=n
CONFIG_MFD_ATC260X=y
CONFIG_MFD_ATC260X_I2C=y
CONFIG_MFD_QCOM_PM8008=y
CONFIG_RAVE_SP_CORE=n
CONFIG_MFD_RSMU_I2C=y
# end of Multifunction device drivers

CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=n
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=y
CONFIG_REGULATOR_88PM8607=y
CONFIG_REGULATOR_ACT8865=n
CONFIG_REGULATOR_ACT8945A=y
CONFIG_REGULATOR_AD5398=n
CONFIG_REGULATOR_ARIZONA_LDO1=n
CONFIG_REGULATOR_ARIZONA_MICSUPP=n
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_ATC260X=n
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_BD71815=y
CONFIG_REGULATOR_BD71828=y
CONFIG_REGULATOR_BD957XMUF=n
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_DA9055=y
CONFIG_REGULATOR_DA9063=n
CONFIG_REGULATOR_DA9121=y
CONFIG_REGULATOR_DA9210=n
CONFIG_REGULATOR_DA9211=n
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_FAN53880=n
CONFIG_REGULATOR_GPIO=n
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=n
CONFIG_REGULATOR_LM363X=y
CONFIG_REGULATOR_LOCHNAGAR=n
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LTC3589=n
CONFIG_REGULATOR_LTC3676=n
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX8649=n
CONFIG_REGULATOR_MAX8660=n
CONFIG_REGULATOR_MAX8893=y
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_MAX8952=n
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX20086=n
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MC13783=n
CONFIG_REGULATOR_MC13892=n
CONFIG_REGULATOR_MCP16502=y
CONFIG_REGULATOR_MP5416=n
CONFIG_REGULATOR_MP8859=n
CONFIG_REGULATOR_MP886X=y
CONFIG_REGULATOR_MPQ7920=y
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6323=n
CONFIG_REGULATOR_MT6358=n
CONFIG_REGULATOR_MT6359=y
CONFIG_REGULATOR_MT6360=y
CONFIG_REGULATOR_MT6397=y
CONFIG_REGULATOR_PCA9450=y
CONFIG_REGULATOR_PCF50633=n
CONFIG_REGULATOR_PF8X00=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=n
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=y
CONFIG_REGULATOR_RN5T618=y
CONFIG_REGULATOR_ROHM=y
CONFIG_REGULATOR_RT4801=y
CONFIG_REGULATOR_RT5033=y
CONFIG_REGULATOR_RT5190A=n
CONFIG_REGULATOR_RT6160=n
CONFIG_REGULATOR_RT6245=n
CONFIG_REGULATOR_RTQ2134=y
CONFIG_REGULATOR_RTMV20=y
CONFIG_REGULATOR_RTQ6752=n
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_SLG51000=y
CONFIG_REGULATOR_STPMIC1=y
CONFIG_REGULATOR_SY7636A=n
CONFIG_REGULATOR_SY8106A=y
CONFIG_REGULATOR_SY8824X=n
CONFIG_REGULATOR_SY8827N=y
CONFIG_REGULATOR_TPS51632=n
CONFIG_REGULATOR_TPS62360=n
CONFIG_REGULATOR_TPS6286X=n
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=n
CONFIG_REGULATOR_TPS65086=y
CONFIG_REGULATOR_TPS65090=n
CONFIG_REGULATOR_TPS65132=y
CONFIG_REGULATOR_TPS6586X=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_VCTRL=n
CONFIG_REGULATOR_WM831X=n
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8400=n
CONFIG_RC_CORE=y
CONFIG_BPF_LIRC_MODE2=y
CONFIG_LIRC=y
CONFIG_RC_MAP=y
CONFIG_RC_DECODERS=y
CONFIG_IR_IMON_DECODER=y
CONFIG_IR_JVC_DECODER=n
CONFIG_IR_MCE_KBD_DECODER=n
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_RCMM_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=n
CONFIG_IR_SONY_DECODER=n
CONFIG_IR_XMP_DECODER=y
CONFIG_RC_DEVICES=y
CONFIG_IR_ENE=n
CONFIG_IR_FINTEK=n
CONFIG_IR_GPIO_CIR=y
CONFIG_IR_GPIO_TX=y
CONFIG_IR_HIX5HD2=n
CONFIG_IR_ITE_CIR=n
CONFIG_IR_NUVOTON=n
CONFIG_IR_PWM_TX=y
CONFIG_IR_SERIAL=y
CONFIG_IR_SERIAL_TRANSMITTER=y
CONFIG_IR_WINBOND_CIR=n
CONFIG_RC_LOOPBACK=n
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y

#
# CEC support
#
CONFIG_MEDIA_CEC_RC=n
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=y
CONFIG_USB_PULSE8_CEC=n
CONFIG_USB_RAINSHADOW_CEC=n
# end of CEC support

CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_SUPPORT_FILTER=n
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y

#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types

#
# Media core support
#
CONFIG_VIDEO_DEV=n
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=y
# end of Media core support

#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
# end of Media controller options

#
# Digital TV options
#
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_DEMUX_SECTION_LOSS_LOG=y
CONFIG_DVB_ULE_DEBUG=n
# end of Digital TV options

#
# Media drivers
#

#
# Media drivers
#
CONFIG_MEDIA_PCI_SUPPORT=n
CONFIG_MEDIA_PLATFORM_DRIVERS=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SDR_PLATFORM_DRIVERS=n
CONFIG_DVB_PLATFORM_DRIVERS=y

#
# Allegro DVT drivers
#

#
# Amlogic drivers
#

#
# Amphion drivers
#

#
# Aspeed drivers
#

#
# Atmel drivers
#

#
# Cadence drivers
#

#
# Chips&Media drivers
#

#
# Intel drivers
#

#
# Marvell drivers
#

#
# Mediatek drivers
#

#
# NVidia drivers
#

#
# NXP drivers
#
CONFIG_VIDEO_IMX_MIPI_CSIS=n

#
# Qualcomm drivers
#

#
# Renesas drivers
#

#
# Rockchip drivers
#

#
# Samsung drivers
#

#
# STMicroelectronics drivers
#

#
# Texas Instruments drivers
#

#
# VIA drivers
#

#
# Xilinx drivers
#

#
# MMC/SDIO DVB adapters
#
CONFIG_SMS_SDIO_DRV=n
CONFIG_DVB_TEST_DRIVERS=n

#
# FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=y
CONFIG_DVB_FIREDTV_INPUT=y
# end of Media drivers

#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=y

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_FC0011=y
CONFIG_MEDIA_TUNER_FC0012=y
CONFIG_MEDIA_TUNER_FC0013=n
CONFIG_MEDIA_TUNER_IT913X=n
CONFIG_MEDIA_TUNER_M88RS6000T=n
CONFIG_MEDIA_TUNER_MAX2165=n
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2063=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_MT2266=n
CONFIG_MEDIA_TUNER_MXL301RF=n
CONFIG_MEDIA_TUNER_MXL5005S=y
CONFIG_MEDIA_TUNER_MXL5007T=y
CONFIG_MEDIA_TUNER_QM1D1B0004=y
CONFIG_MEDIA_TUNER_QM1D1C0042=y
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_R820T=y
CONFIG_MEDIA_TUNER_SI2157=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA18212=y
CONFIG_MEDIA_TUNER_TDA18218=y
CONFIG_MEDIA_TUNER_TDA18250=n
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_TUA9001=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_XC5000=y
# end of Customize TV tuners

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_M88DS3103=y
CONFIG_DVB_MXL5XX=y
CONFIG_DVB_STB0899=y
CONFIG_DVB_STB6100=y
CONFIG_DVB_STV090x=y
CONFIG_DVB_STV0910=y
CONFIG_DVB_STV6110x=y
CONFIG_DVB_STV6111=y

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=y
CONFIG_DVB_MN88472=n
CONFIG_DVB_MN88473=n
CONFIG_DVB_SI2165=y
CONFIG_DVB_TDA18271C2DD=y

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=y
CONFIG_DVB_CX24116=y
CONFIG_DVB_CX24117=y
CONFIG_DVB_CX24120=y
CONFIG_DVB_CX24123=y
CONFIG_DVB_DS3000=n
CONFIG_DVB_MB86A16=y
CONFIG_DVB_MT312=y
CONFIG_DVB_S5H1420=y
CONFIG_DVB_SI21XX=n
CONFIG_DVB_STB6000=n
CONFIG_DVB_STV0288=y
CONFIG_DVB_STV0299=y
CONFIG_DVB_STV0900=y
CONFIG_DVB_STV6110=n
CONFIG_DVB_TDA10071=n
CONFIG_DVB_TDA10086=y
CONFIG_DVB_TDA8083=n
CONFIG_DVB_TDA8261=n
CONFIG_DVB_TDA826X=y
CONFIG_DVB_TS2020=y
CONFIG_DVB_TUA6100=n
CONFIG_DVB_TUNER_CX24113=y
CONFIG_DVB_TUNER_ITD1000=n
CONFIG_DVB_VES1X93=n
CONFIG_DVB_ZL10036=n
CONFIG_DVB_ZL10039=n

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_AF9013=y
CONFIG_DVB_CX22700=n
CONFIG_DVB_CX22702=n
CONFIG_DVB_CXD2820R=n
CONFIG_DVB_CXD2841ER=n
CONFIG_DVB_DIB3000MB=y
CONFIG_DVB_DIB3000MC=n
CONFIG_DVB_DIB7000M=y
CONFIG_DVB_DIB7000P=y
CONFIG_DVB_DIB9000=y
CONFIG_DVB_DRXD=y
CONFIG_DVB_EC100=n
CONFIG_DVB_L64781=y
CONFIG_DVB_MT352=y
CONFIG_DVB_NXT6000=y
CONFIG_DVB_RTL2830=y
CONFIG_DVB_RTL2832=y
CONFIG_DVB_S5H1432=y
CONFIG_DVB_SI2168=y
CONFIG_DVB_SP887X=y
CONFIG_DVB_STV0367=y
CONFIG_DVB_TDA10048=n
CONFIG_DVB_TDA1004X=n
CONFIG_DVB_ZD1301_DEMOD=y
CONFIG_DVB_ZL10353=y

#
# DVB-C (cable) frontends
#
CONFIG_DVB_STV0297=y
CONFIG_DVB_TDA10021=y
CONFIG_DVB_TDA10023=n
CONFIG_DVB_VES1820=y

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_AU8522=y
CONFIG_DVB_AU8522_DTV=y
CONFIG_DVB_BCM3510=y
CONFIG_DVB_LG2160=y
CONFIG_DVB_LGDT3305=y
CONFIG_DVB_LGDT3306A=n
CONFIG_DVB_LGDT330X=y
CONFIG_DVB_MXL692=n
CONFIG_DVB_NXT200X=y
CONFIG_DVB_OR51132=y
CONFIG_DVB_OR51211=y
CONFIG_DVB_S5H1409=y
CONFIG_DVB_S5H1411=n

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_DIB8000=y
CONFIG_DVB_MB86A20S=y
CONFIG_DVB_S921=n

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_MN88443X=n
CONFIG_DVB_TC90522=y

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
CONFIG_DVB_TUNER_DIB0070=y
CONFIG_DVB_TUNER_DIB0090=n

#
# SEC control devices for DVB-S
#
CONFIG_DVB_A8293=n
CONFIG_DVB_AF9033=n
CONFIG_DVB_ASCOT2E=n
CONFIG_DVB_ATBM8830=y
CONFIG_DVB_HELENE=y
CONFIG_DVB_HORUS3A=n
CONFIG_DVB_ISL6405=n
CONFIG_DVB_ISL6421=y
CONFIG_DVB_ISL6423=y
CONFIG_DVB_IX2505V=y
CONFIG_DVB_LGS8GL5=y
CONFIG_DVB_LGS8GXX=n
CONFIG_DVB_LNBH25=n
CONFIG_DVB_LNBH29=y
CONFIG_DVB_LNBP21=n
CONFIG_DVB_LNBP22=n
CONFIG_DVB_M88RS2000=n
CONFIG_DVB_TDA665x=n
CONFIG_DVB_DRX39XYJ=y

#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=y
CONFIG_DVB_SP2=y
# end of Customise DVB Frontends

#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=y
# end of Media ancillary drivers

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=n
CONFIG_AGP_ATI=y
CONFIG_AGP_AMD=y
CONFIG_AGP_INTEL=n
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=n
CONFIG_AGP_VIA=n
CONFIG_AGP_EFFICEON=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_SWITCHEROO=n
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_BUS=y
CONFIG_DRM_DP_AUX_CHARDEV=y
CONFIG_DRM_DEBUG_MM=y
CONFIG_DRM_DEBUG_SELFTEST=n
CONFIG_DRM_DP_HELPER=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS=y
CONFIG_DRM_DEBUG_MODESET_LOCK=n
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM=n
CONFIG_DRM_LOAD_EDID_FIRMWARE=n
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_TTM=y
CONFIG_DRM_BUDDY=y
CONFIG_DRM_VRAM_HELPER=y
CONFIG_DRM_TTM_HELPER=y
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_SCHED=y

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
CONFIG_DRM_I2C_SIL164=y
CONFIG_DRM_I2C_NXP_TDA998X=y
CONFIG_DRM_I2C_NXP_TDA9950=y
# end of I2C encoder or helper chips

#
# ARM devices
#
CONFIG_DRM_KOMEDA=y
# end of ARM devices

CONFIG_DRM_RADEON=n
CONFIG_DRM_AMDGPU=n
CONFIG_DRM_NOUVEAU=n
CONFIG_DRM_I915=y
CONFIG_DRM_I915_FORCE_PROBE=""
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=n
CONFIG_DRM_I915_USERPTR=n
CONFIG_DRM_I915_PXP=n

#
# drm/i915 Debugging
#
CONFIG_DRM_I915_WERROR=y
CONFIG_DRM_I915_DEBUG=n
CONFIG_DRM_I915_DEBUG_MMIO=y
CONFIG_DRM_I915_DEBUG_GEM=y
CONFIG_DRM_I915_DEBUG_GEM_ONCE=y
CONFIG_DRM_I915_ERRLOG_GEM=y
CONFIG_DRM_I915_TRACE_GEM=y
CONFIG_DRM_I915_TRACE_GTT=y
CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS=y
CONFIG_DRM_I915_SW_FENCE_CHECK_DAG=y
CONFIG_DRM_I915_DEBUG_GUC=y
CONFIG_DRM_I915_SELFTEST=n
CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS=y
CONFIG_DRM_I915_DEBUG_VBLANK_EVADE=n
CONFIG_DRM_I915_DEBUG_RUNTIME_PM=y
# end of drm/i915 Debugging

#
# drm/i915 Profile Guided Optimisation
#
CONFIG_DRM_I915_REQUEST_TIMEOUT=20000
CONFIG_DRM_I915_FENCE_TIMEOUT=10000
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500
CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000
CONFIG_DRM_I915_STOP_TIMEOUT=100
CONFIG_DRM_I915_TIMESLICE_DURATION=1
# end of drm/i915 Profile Guided Optimisation

CONFIG_DRM_VGEM=y
CONFIG_DRM_VKMS=y
CONFIG_DRM_VMWGFX=y
CONFIG_DRM_VMWGFX_FBCON=n
CONFIG_DRM_VMWGFX_MKSSTATS=y
CONFIG_DRM_GMA500=y
CONFIG_DRM_AST=y
CONFIG_DRM_MGAG200=y
CONFIG_DRM_RCAR_DW_HDMI=n
CONFIG_DRM_RCAR_USE_LVDS=y
CONFIG_DRM_RCAR_MIPI_DSI=y
CONFIG_DRM_QXL=n
CONFIG_DRM_VIRTIO_GPU=n
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_PANEL_ARM_VERSATILE=n
CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596=y
CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0=y
CONFIG_DRM_PANEL_BOE_HIMAX8279D=n
CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=y
CONFIG_DRM_PANEL_DSI_CM=y
CONFIG_DRM_PANEL_LVDS=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_PANEL_EDP=n
CONFIG_DRM_PANEL_ELIDA_KD35T133=y
CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02=n
CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D=n
CONFIG_DRM_PANEL_ILITEK_ILI9881C=y
CONFIG_DRM_PANEL_INNOLUX_P079ZCA=y
CONFIG_DRM_PANEL_JDI_LT070ME05000=y
CONFIG_DRM_PANEL_JDI_R63452=n
CONFIG_DRM_PANEL_KHADAS_TS050=y
CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04=n
CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W=y
CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=y
CONFIG_DRM_PANEL_NOVATEK_NT35510=y
CONFIG_DRM_PANEL_NOVATEK_NT35560=n
CONFIG_DRM_PANEL_NOVATEK_NT35950=y
CONFIG_DRM_PANEL_NOVATEK_NT36672A=n
CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=y
CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=n
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=y
CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=y
CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=y
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=n
CONFIG_DRM_PANEL_RAYDIUM_RM67191=n
CONFIG_DRM_PANEL_RAYDIUM_RM68200=y
CONFIG_DRM_PANEL_RONBO_RB070D30=y
CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20=y
CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=n
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI=n
CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01=y
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
CONFIG_DRM_PANEL_SAMSUNG_SOFEF00=y
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=y
CONFIG_DRM_PANEL_SHARP_LS037V7DW01=n
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=y
CONFIG_DRM_PANEL_SHARP_LS060T1SX01=n
CONFIG_DRM_PANEL_SITRONIX_ST7701=y
CONFIG_DRM_PANEL_SITRONIX_ST7703=y
CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521=n
CONFIG_DRM_PANEL_TDO_TL070WSH30=y
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=y
CONFIG_DRM_PANEL_VISIONOX_RM69299=y
CONFIG_DRM_PANEL_XINPENG_XPP055C272=y
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
CONFIG_DRM_CDNS_DSI=y
CONFIG_DRM_CHIPONE_ICN6211=y
CONFIG_DRM_CHRONTEL_CH7033=n
CONFIG_DRM_DISPLAY_CONNECTOR=y
CONFIG_DRM_ITE_IT6505=n
CONFIG_DRM_LONTIUM_LT8912B=y
CONFIG_DRM_LONTIUM_LT9611=y
CONFIG_DRM_LONTIUM_LT9611UXC=n
CONFIG_DRM_ITE_IT66121=y
CONFIG_DRM_LVDS_CODEC=y
CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW=y
CONFIG_DRM_NWL_MIPI_DSI=y
CONFIG_DRM_NXP_PTN3460=n
CONFIG_DRM_PARADE_PS8622=n
CONFIG_DRM_PARADE_PS8640=n
CONFIG_DRM_SIL_SII8620=y
CONFIG_DRM_SII902X=n
CONFIG_DRM_SII9234=y
CONFIG_DRM_SIMPLE_BRIDGE=n
CONFIG_DRM_THINE_THC63LVD1024=y
CONFIG_DRM_TOSHIBA_TC358762=n
CONFIG_DRM_TOSHIBA_TC358764=y
CONFIG_DRM_TOSHIBA_TC358767=n
CONFIG_DRM_TOSHIBA_TC358768=y
CONFIG_DRM_TOSHIBA_TC358775=y
CONFIG_DRM_TI_TFP410=y
CONFIG_DRM_TI_SN65DSI83=n
CONFIG_DRM_TI_SN65DSI86=n
CONFIG_DRM_TI_TPD12S015=y
CONFIG_DRM_ANALOGIX_ANX6345=n
CONFIG_DRM_ANALOGIX_ANX78XX=y
CONFIG_DRM_ANALOGIX_DP=y
CONFIG_DRM_ANALOGIX_ANX7625=y
CONFIG_DRM_I2C_ADV7511=n
CONFIG_DRM_CDNS_MHDP8546=n
# end of Display Interface Bridges

CONFIG_DRM_ETNAVIV=y
CONFIG_DRM_ETNAVIV_THERMAL=y
CONFIG_DRM_MXS=y
CONFIG_DRM_MXSFB=y
CONFIG_DRM_ARCPGU=n
CONFIG_DRM_BOCHS=y
CONFIG_DRM_CIRRUS_QEMU=n
CONFIG_DRM_SIMPLEDRM=y
CONFIG_DRM_VBOXVIDEO=y
CONFIG_DRM_SSD130X=n
CONFIG_DRM_LEGACY=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
CONFIG_DRM_MGA=y
CONFIG_DRM_SIS=n
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_NOMODESET=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=n
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=n
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=n
CONFIG_FB_CYBER2000=n
CONFIG_FB_ARC=y
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=n
CONFIG_FB_VESA=y
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_OPENCORES=y
CONFIG_FB_S1D13XXX=n
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=n
CONFIG_FB_NVIDIA_DEBUG=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I740=y
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
CONFIG_FB_MATROX=n
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=n
CONFIG_FB_RADEON_BACKLIGHT=y
CONFIG_FB_RADEON_DEBUG=y
CONFIG_FB_ATY128=n
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=n
CONFIG_FB_ATY_BACKLIGHT=n
CONFIG_FB_S3=y
CONFIG_FB_S3_DDC=n
CONFIG_FB_SAVAGE=n
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=n
CONFIG_FB_VIA=y
CONFIG_FB_VIA_DIRECT_PROCFS=n
CONFIG_FB_VIA_X_COMPATIBILITY=y
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=n
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=n
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=n
CONFIG_FB_ARK=y
CONFIG_FB_PM3=n
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=n
CONFIG_CARMINE_DRAM_CUSTOM=y
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=n
CONFIG_FB_GEODE_GX=y
CONFIG_FB_GEODE_GX1=y
CONFIG_FB_SM501=y
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_GOLDFISH=n
CONFIG_FB_VIRTUAL=y
CONFIG_FB_METRONOME=n
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=n
CONFIG_FB_SSD1307=y
CONFIG_FB_SM712=y
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=y
CONFIG_BACKLIGHT_CARILLO_RANCH=n
CONFIG_BACKLIGHT_PWM=n
CONFIG_BACKLIGHT_DA9052=n
CONFIG_BACKLIGHT_MAX8925=y
CONFIG_BACKLIGHT_APPLE=n
CONFIG_BACKLIGHT_QCOM_WLED=y
CONFIG_BACKLIGHT_SAHARA=n
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=n
CONFIG_BACKLIGHT_PCF50633=n
CONFIG_BACKLIGHT_LM3630A=y
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
CONFIG_BACKLIGHT_PANDORA=y
CONFIG_BACKLIGHT_SKY81452=y
CONFIG_BACKLIGHT_AS3711=n
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=n
CONFIG_BACKLIGHT_ARCXCNN=y
CONFIG_BACKLIGHT_LED=y
# end of Backlight & LCD device support

CONFIG_VGASTATE=y
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
CONFIG_LOGO=n
# end of Graphics support

CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=n
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_DYNAMIC_MINORS=n
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=n
CONFIG_SND_DEBUG=n
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_SEQUENCER=n
CONFIG_SND_MPU401_UART=y
CONFIG_SND_VX_LIB=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=y
CONFIG_SND_ALOOP=n
CONFIG_SND_MTPAV=n
CONFIG_SND_MTS64=y
CONFIG_SND_SERIAL_U16550=n
CONFIG_SND_MPU401=y
CONFIG_SND_PORTMAN2X4=n
CONFIG_SND_PCI=n

#
# HD-Audio
#
# end of HD-Audio

CONFIG_SND_HDA_PREALLOC_SIZE=0
CONFIG_SND_INTEL_NHLT=y
CONFIG_SND_INTEL_DSP_CONFIG=y
CONFIG_SND_INTEL_SOUNDWIRE_ACPI=y
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=y
CONFIG_SND_DICE=y
CONFIG_SND_OXFW=y
CONFIG_SND_ISIGHT=y
CONFIG_SND_FIREWORKS=y
CONFIG_SND_BEBOB=y
CONFIG_SND_FIREWIRE_DIGI00X=y
CONFIG_SND_FIREWIRE_TASCAM=y
CONFIG_SND_FIREWIRE_MOTU=y
CONFIG_SND_FIREFACE=n
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=y
CONFIG_SND_PDAUDIOCF=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_ACPI=y
CONFIG_SND_SOC_ADI=n
CONFIG_SND_SOC_AMD_ACP=n
CONFIG_SND_SOC_AMD_ACP3x=n
CONFIG_SND_SOC_AMD_RENOIR=n
CONFIG_SND_SOC_AMD_ACP5x=y
CONFIG_SND_SOC_AMD_ACP6x=y
CONFIG_SND_SOC_AMD_YC_MACH=y
CONFIG_SND_AMD_ACP_CONFIG=y
CONFIG_SND_SOC_AMD_ACP_COMMON=n
CONFIG_SND_ATMEL_SOC=y
CONFIG_SND_SOC_MIKROE_PROTO=n
CONFIG_SND_BCM63XX_I2S_WHISTLER=y
CONFIG_SND_DESIGNWARE_I2S=y
CONFIG_SND_DESIGNWARE_PCM=n

#
# SoC Audio for Freescale CPUs
#

#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=n
CONFIG_SND_SOC_FSL_SAI=n
CONFIG_SND_SOC_FSL_AUDMIX=n
CONFIG_SND_SOC_FSL_SSI=y
CONFIG_SND_SOC_FSL_SPDIF=y
CONFIG_SND_SOC_FSL_ESAI=y
CONFIG_SND_SOC_FSL_MICFIL=y
CONFIG_SND_SOC_FSL_XCVR=y
CONFIG_SND_SOC_FSL_RPMSG=n
CONFIG_SND_SOC_IMX_AUDMUX=y
# end of SoC Audio for Freescale CPUs

CONFIG_SND_I2S_HI6210_I2S=n
CONFIG_SND_SOC_IMG=n
CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
CONFIG_SND_SOC_INTEL_CATPT=n
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=y
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI=n
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=y
CONFIG_SND_SOC_INTEL_SKYLAKE=n
CONFIG_SND_SOC_INTEL_SKL=n
CONFIG_SND_SOC_INTEL_APL=n
CONFIG_SND_SOC_INTEL_KBL=n
CONFIG_SND_SOC_INTEL_GLK=n
CONFIG_SND_SOC_INTEL_CNL=n
CONFIG_SND_SOC_INTEL_CFL=n
CONFIG_SND_SOC_INTEL_CML_H=n
CONFIG_SND_SOC_INTEL_CML_LP=n
CONFIG_SND_SOC_ACPI_INTEL_MATCH=y
CONFIG_SND_SOC_INTEL_AVS=n
CONFIG_SND_SOC_INTEL_MACH=y
CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES=y
CONFIG_SND_SOC_MTK_BTCVSD=y
CONFIG_SND_SOC_SOF_TOPLEVEL=y
CONFIG_SND_SOC_SOF_PCI=y
CONFIG_SND_SOC_SOF_ACPI=n
CONFIG_SND_SOC_SOF_OF=y
CONFIG_SND_SOC_SOF_AMD_TOPLEVEL=n
CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL=n

#
# STMicroelectronics STM32 SOC audio support
#
# end of STMicroelectronics STM32 SOC audio support

CONFIG_SND_SOC_XILINX_I2S=n
CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=y
CONFIG_SND_SOC_XILINX_SPDIF=n
CONFIG_SND_SOC_XTFPGA_I2S=y
CONFIG_SND_SOC_I2C_AND_SPI=y

#
# CODEC drivers
#
CONFIG_SND_SOC_WM_ADSP=y
CONFIG_SND_SOC_AC97_CODEC=n
CONFIG_SND_SOC_ADAU_UTILS=y
CONFIG_SND_SOC_ADAU1372=y
CONFIG_SND_SOC_ADAU1372_I2C=y
CONFIG_SND_SOC_ADAU1701=y
CONFIG_SND_SOC_ADAU1761_I2C=n
CONFIG_SND_SOC_ADAU7002=n
CONFIG_SND_SOC_ADAU7118=y
CONFIG_SND_SOC_ADAU7118_HW=y
CONFIG_SND_SOC_ADAU7118_I2C=y
CONFIG_SND_SOC_AK4118=y
CONFIG_SND_SOC_AK4375=y
CONFIG_SND_SOC_AK4458=y
CONFIG_SND_SOC_AK4554=n
CONFIG_SND_SOC_AK4613=y
CONFIG_SND_SOC_AK4642=y
CONFIG_SND_SOC_AK5386=y
CONFIG_SND_SOC_AK5558=n
CONFIG_SND_SOC_ALC5623=y
CONFIG_SND_SOC_AW8738=n
CONFIG_SND_SOC_BD28623=y
CONFIG_SND_SOC_BT_SCO=y
CONFIG_SND_SOC_CS35L32=y
CONFIG_SND_SOC_CS35L33=n
CONFIG_SND_SOC_CS35L34=y
CONFIG_SND_SOC_CS35L35=y
CONFIG_SND_SOC_CS35L36=n
CONFIG_SND_SOC_CS35L41_LIB=y
CONFIG_SND_SOC_CS35L41=y
CONFIG_SND_SOC_CS35L41_I2C=y
CONFIG_SND_SOC_CS42L42=y
CONFIG_SND_SOC_CS42L51_I2C=n
CONFIG_SND_SOC_CS42L52=y
CONFIG_SND_SOC_CS42L56=y
CONFIG_SND_SOC_CS42L73=y
CONFIG_SND_SOC_CS4234=y
CONFIG_SND_SOC_CS4265=n
CONFIG_SND_SOC_CS4270=y
CONFIG_SND_SOC_CS4271=y
CONFIG_SND_SOC_CS4271_I2C=y
CONFIG_SND_SOC_CS42XX8=y
CONFIG_SND_SOC_CS42XX8_I2C=y
CONFIG_SND_SOC_CS43130=y
CONFIG_SND_SOC_CS4341=y
CONFIG_SND_SOC_CS4349=n
CONFIG_SND_SOC_CS53L30=y
CONFIG_SND_SOC_CX2072X=n
CONFIG_SND_SOC_DA7213=y
CONFIG_SND_SOC_DMIC=y
CONFIG_SND_SOC_HDMI_CODEC=y
CONFIG_SND_SOC_ES7134=y
CONFIG_SND_SOC_ES7241=y
CONFIG_SND_SOC_ES8316=y
CONFIG_SND_SOC_ES8328_I2C=n
CONFIG_SND_SOC_GTM601=n
CONFIG_SND_SOC_ICS43432=y
CONFIG_SND_SOC_INNO_RK3036=y
CONFIG_SND_SOC_LOCHNAGAR_SC=y
CONFIG_SND_SOC_MAX98088=n
CONFIG_SND_SOC_MAX98357A=y
CONFIG_SND_SOC_MAX98504=y
CONFIG_SND_SOC_MAX9867=y
CONFIG_SND_SOC_MAX98927=n
CONFIG_SND_SOC_MAX98520=y
CONFIG_SND_SOC_MAX98373=y
CONFIG_SND_SOC_MAX98373_I2C=y
CONFIG_SND_SOC_MAX98373_SDW=y
CONFIG_SND_SOC_MAX98390=y
CONFIG_SND_SOC_MAX9860=n
CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=n
CONFIG_SND_SOC_PCM1681=y
CONFIG_SND_SOC_PCM1789=y
CONFIG_SND_SOC_PCM1789_I2C=y
CONFIG_SND_SOC_PCM179X=y
CONFIG_SND_SOC_PCM179X_I2C=y
CONFIG_SND_SOC_PCM186X=y
CONFIG_SND_SOC_PCM186X_I2C=y
CONFIG_SND_SOC_PCM3060=y
CONFIG_SND_SOC_PCM3060_I2C=y
CONFIG_SND_SOC_PCM3168A_I2C=n
CONFIG_SND_SOC_PCM5102A=y
CONFIG_SND_SOC_PCM512x=y
CONFIG_SND_SOC_PCM512x_I2C=y
CONFIG_SND_SOC_RK3328=y
CONFIG_SND_SOC_RL6231=y
CONFIG_SND_SOC_RT1308_SDW=y
CONFIG_SND_SOC_RT1316_SDW=n
CONFIG_SND_SOC_RT5616=y
CONFIG_SND_SOC_RT5631=y
CONFIG_SND_SOC_RT5640=y
CONFIG_SND_SOC_RT5659=y
CONFIG_SND_SOC_RT5682=y
CONFIG_SND_SOC_RT5682_SDW=y
CONFIG_SND_SOC_RT700=y
CONFIG_SND_SOC_RT700_SDW=y
CONFIG_SND_SOC_RT711=y
CONFIG_SND_SOC_RT711_SDW=y
CONFIG_SND_SOC_RT711_SDCA_SDW=y
CONFIG_SND_SOC_RT715_SDW=n
CONFIG_SND_SOC_RT715_SDCA_SDW=n
CONFIG_SND_SOC_RT9120=y
CONFIG_SND_SOC_SDW_MOCKUP=y
CONFIG_SND_SOC_SGTL5000=n
CONFIG_SND_SOC_SIGMADSP=y
CONFIG_SND_SOC_SIGMADSP_I2C=y
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=n
CONFIG_SND_SOC_SIMPLE_MUX=y
CONFIG_SND_SOC_SPDIF=y
CONFIG_SND_SOC_SSM2305=y
CONFIG_SND_SOC_SSM2518=y
CONFIG_SND_SOC_SSM2602=y
CONFIG_SND_SOC_SSM2602_I2C=y
CONFIG_SND_SOC_SSM4567=y
CONFIG_SND_SOC_STA32X=y
CONFIG_SND_SOC_STA350=y
CONFIG_SND_SOC_STI_SAS=y
CONFIG_SND_SOC_TAS2552=n
CONFIG_SND_SOC_TAS2562=y
CONFIG_SND_SOC_TAS2764=y
CONFIG_SND_SOC_TAS2770=y
CONFIG_SND_SOC_TAS5086=n
CONFIG_SND_SOC_TAS571X=n
CONFIG_SND_SOC_TAS5720=y
CONFIG_SND_SOC_TAS5805M=n
CONFIG_SND_SOC_TAS6424=y
CONFIG_SND_SOC_TDA7419=y
CONFIG_SND_SOC_TFA9879=y
CONFIG_SND_SOC_TFA989X=y
CONFIG_SND_SOC_TLV320ADC3XXX=y
CONFIG_SND_SOC_TLV320AIC23_I2C=n
CONFIG_SND_SOC_TLV320AIC31XX=y
CONFIG_SND_SOC_TLV320AIC32X4=y
CONFIG_SND_SOC_TLV320AIC32X4_I2C=y
CONFIG_SND_SOC_TLV320AIC3X=y
CONFIG_SND_SOC_TLV320AIC3X_I2C=y
CONFIG_SND_SOC_TLV320ADCX140=n
CONFIG_SND_SOC_TS3A227E=y
CONFIG_SND_SOC_TSCS42XX=n
CONFIG_SND_SOC_TSCS454=y
CONFIG_SND_SOC_UDA1334=y
CONFIG_SND_SOC_WCD938X_SDW=n
CONFIG_SND_SOC_WM8510=n
CONFIG_SND_SOC_WM8523=y
CONFIG_SND_SOC_WM8524=y
CONFIG_SND_SOC_WM8580=y
CONFIG_SND_SOC_WM8711=y
CONFIG_SND_SOC_WM8728=y
CONFIG_SND_SOC_WM8731=y
CONFIG_SND_SOC_WM8737=y
CONFIG_SND_SOC_WM8741=n
CONFIG_SND_SOC_WM8750=n
CONFIG_SND_SOC_WM8753=y
CONFIG_SND_SOC_WM8776=y
CONFIG_SND_SOC_WM8782=n
CONFIG_SND_SOC_WM8804=y
CONFIG_SND_SOC_WM8804_I2C=y
CONFIG_SND_SOC_WM8903=y
CONFIG_SND_SOC_WM8904=y
CONFIG_SND_SOC_WM8960=y
CONFIG_SND_SOC_WM8962=y
CONFIG_SND_SOC_WM8974=n
CONFIG_SND_SOC_WM8978=y
CONFIG_SND_SOC_WM8985=y
CONFIG_SND_SOC_WSA881X=y
CONFIG_SND_SOC_MAX9759=n
CONFIG_SND_SOC_MT6351=n
CONFIG_SND_SOC_MT6358=y
CONFIG_SND_SOC_MT6660=y
CONFIG_SND_SOC_NAU8315=y
CONFIG_SND_SOC_NAU8540=y
CONFIG_SND_SOC_NAU8810=y
CONFIG_SND_SOC_NAU8821=y
CONFIG_SND_SOC_NAU8822=y
CONFIG_SND_SOC_NAU8824=y
CONFIG_SND_SOC_TPA6130A2=y
CONFIG_SND_SOC_LPASS_MACRO_COMMON=y
CONFIG_SND_SOC_LPASS_WSA_MACRO=n
CONFIG_SND_SOC_LPASS_VA_MACRO=y
CONFIG_SND_SOC_LPASS_RX_MACRO=n
CONFIG_SND_SOC_LPASS_TX_MACRO=y
# end of CODEC drivers

CONFIG_SND_SIMPLE_CARD_UTILS=y
CONFIG_SND_SIMPLE_CARD=y
CONFIG_SND_AUDIO_GRAPH_CARD=y
CONFIG_SND_AUDIO_GRAPH_CARD2=y
CONFIG_SND_AUDIO_GRAPH_CARD2_CUSTOM_SAMPLE=y
CONFIG_SND_TEST_COMPONENT=n
CONFIG_SND_X86=y
CONFIG_HDMI_LPE_AUDIO=y
CONFIG_SND_VIRTIO=y

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=y
CONFIG_HID_GENERIC=n

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=n
CONFIG_HID_APPLE=n
CONFIG_HID_AUREAL=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_COUGAR=n
CONFIG_HID_MACALLY=y
CONFIG_HID_CMEDIA=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELECOM=n
CONFIG_HID_EZKEY=y
CONFIG_HID_GEMBIRD=y
CONFIG_HID_GFRM=n
CONFIG_HID_GLORIOUS=y
CONFIG_HID_VIVALDI_COMMON=y
CONFIG_HID_VIVALDI=y
CONFIG_HID_KEYTOUCH=n
CONFIG_HID_KYE=y
CONFIG_HID_WALTOP=y
CONFIG_HID_VIEWSONIC=n
CONFIG_HID_XIAOMI=y
CONFIG_HID_GYRATION=n
CONFIG_HID_ICADE=n
CONFIG_HID_ITE=y
CONFIG_HID_JABRA=n
CONFIG_HID_TWINHAN=n
CONFIG_HID_KENSINGTON=n
CONFIG_HID_LCPOWER=y
CONFIG_HID_LED=y
CONFIG_HID_LENOVO=y
CONFIG_HID_MAGICMOUSE=n
CONFIG_HID_MALTRON=y
CONFIG_HID_MAYFLASH=n
CONFIG_HID_REDRAGON=n
CONFIG_HID_MICROSOFT=n
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NINTENDO=y
CONFIG_NINTENDO_FF=y
CONFIG_HID_NTI=n
CONFIG_HID_ORTEK=n
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=n
CONFIG_HID_PETALYNX=n
CONFIG_HID_PICOLCD=n
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PLAYSTATION=y
CONFIG_PLAYSTATION_FF=n
CONFIG_HID_RAZER=n
CONFIG_HID_PRIMAX=n
CONFIG_HID_SAITEK=y
CONFIG_HID_SEMITEK=y
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEAM=n
CONFIG_HID_STEELSERIES=n
CONFIG_HID_SUNPLUS=y
CONFIG_HID_RMI=y
CONFIG_HID_GREENASIA=n
CONFIG_HID_SMARTJOYPLUS=n
CONFIG_HID_TIVO=y
CONFIG_HID_TOPSEED=y
CONFIG_HID_THINGM=y
CONFIG_HID_UDRAW_PS3=y
CONFIG_HID_WIIMOTE=y
CONFIG_HID_XINMO=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=y
CONFIG_HID_ALPS=y
# end of Special HID drivers

#
# I2C HID support
#
CONFIG_I2C_HID_ACPI=n
CONFIG_I2C_HID_OF=y
CONFIG_I2C_HID_OF_GOODIX=y
# end of I2C HID support

CONFIG_I2C_HID_CORE=y
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ULPI_BUS=n
CONFIG_USB_CONN_GPIO=n
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=n
CONFIG_USB_PCI=y

#
# USB port drivers
#

#
# USB Physical Layer drivers
#
CONFIG_NOP_USB_XCEIV=n
CONFIG_USB_GPIO_VBUS=n
CONFIG_TAHVO_USB=n
# end of USB Physical Layer drivers

CONFIG_USB_GADGET=n
CONFIG_TYPEC=n
CONFIG_USB_ROLE_SWITCH=n
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=n
CONFIG_PWRSEQ_SIMPLE=n
CONFIG_SDIO_UART=y
CONFIG_MMC_TEST=n

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_DEBUG=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=n
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=n
CONFIG_MMC_SDHCI_OF_ASPEED=n
CONFIG_MMC_SDHCI_OF_AT91=y
CONFIG_MMC_SDHCI_OF_DWCMSHC=y
CONFIG_MMC_SDHCI_CADENCE=y
CONFIG_MMC_SDHCI_F_SDH30=y
CONFIG_MMC_SDHCI_MILBEAUT=y
CONFIG_MMC_WBSD=n
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_SDRICOH_CS=y
CONFIG_MMC_CB710=y
CONFIG_MMC_VIA_SDMMC=n
CONFIG_MMC_USDHI6ROL0=y
CONFIG_MMC_CQHCI=y
CONFIG_MMC_HSQ=y
CONFIG_MMC_TOSHIBA_PCI=n
CONFIG_MMC_MTK=y
CONFIG_MMC_SDHCI_XENON=n
CONFIG_MMC_SDHCI_OMAP=n
CONFIG_MMC_SDHCI_AM654=n
CONFIG_MMC_LITEX=n
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=n

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_MEMSTICK_R592=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
CONFIG_LEDS_CLASS_MULTICOLOR=y
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y

#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
CONFIG_LEDS_AN30259A=y
CONFIG_LEDS_AW2013=n
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=n
CONFIG_LEDS_LM3530=n
CONFIG_LEDS_LM3532=y
CONFIG_LEDS_LM3642=n
CONFIG_LEDS_LM3692X=y
CONFIG_LEDS_MT6323=y
CONFIG_LEDS_NET48XX=y
CONFIG_LEDS_WRAP=y
CONFIG_LEDS_PCA9532=n
CONFIG_LEDS_GPIO=n
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP50XX=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=n
CONFIG_LEDS_LP8501=y
CONFIG_LEDS_LP8860=n
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA955X_GPIO=n
CONFIG_LEDS_PCA963X=n
CONFIG_LEDS_WM831X_STATUS=n
CONFIG_LEDS_WM8350=y
CONFIG_LEDS_DA9052=y
CONFIG_LEDS_PWM=n
CONFIG_LEDS_REGULATOR=n
CONFIG_LEDS_BD2802=n
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_ADP5520=n
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX8997=n
CONFIG_LEDS_LM355x=n
CONFIG_LEDS_OT200=y
CONFIG_LEDS_IS31FL319X=n
CONFIG_LEDS_IS31FL32XX=y

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=n
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_MLXREG=y
CONFIG_LEDS_USER=y
CONFIG_LEDS_NIC78BX=n
CONFIG_LEDS_TI_LMU_COMMON=n
CONFIG_LEDS_LGM=y

#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AAT1290=n
CONFIG_LEDS_AS3645A=n
CONFIG_LEDS_KTD2692=n
CONFIG_LEDS_LM3601X=y
CONFIG_LEDS_MT6360=y
CONFIG_LEDS_RT4505=y
CONFIG_LEDS_RT8515=n
CONFIG_LEDS_SGM3140=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=n

#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y

#
# Speakup console speech
#
# end of Speakup console speech

CONFIG_INFINIBAND=n
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_AMD76X=y
CONFIG_EDAC_E7XXX=y
CONFIG_EDAC_E752X=y
CONFIG_EDAC_I82875P=y
CONFIG_EDAC_I82975X=y
CONFIG_EDAC_I3000=y
CONFIG_EDAC_I3200=n
CONFIG_EDAC_IE31200=y
CONFIG_EDAC_X38=n
CONFIG_EDAC_I5400=y
CONFIG_EDAC_I82860=n
CONFIG_EDAC_R82600=y
CONFIG_EDAC_I5000=y
CONFIG_EDAC_I5100=n
CONFIG_EDAC_I7300=y
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=n
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_DMA_OF=y
CONFIG_ALTERA_MSGDMA=y
CONFIG_DW_AXI_DMAC=y
CONFIG_FSL_EDMA=y
CONFIG_INTEL_IDMA64=n
CONFIG_PCH_DMA=y
CONFIG_PLX_DMA=y
CONFIG_TIMB_DMA=y
CONFIG_XILINX_ZYNQMP_DPDMA=y
CONFIG_QCOM_HIDMA_MGMT=n
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
CONFIG_DW_DMAC_PCI=y
CONFIG_HSU_DMA=y
CONFIG_SF_PDMA=y
CONFIG_INTEL_LDMA=n

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_UDMABUF=n
CONFIG_DMABUF_MOVE_NOTIFY=y
CONFIG_DMABUF_DEBUG=n
CONFIG_DMABUF_SELFTESTS=n
CONFIG_DMABUF_HEAPS=y
CONFIG_DMABUF_SYSFS_STATS=n
CONFIG_DMABUF_HEAPS_SYSTEM=n
CONFIG_DMABUF_HEAPS_CMA=n
# end of DMABUF options

CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=y
CONFIG_LINEDISP=y
CONFIG_HD44780_COMMON=y
CONFIG_HD44780=n
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=y
CONFIG_CFAG12864B_RATE=20
CONFIG_IMG_ASCII_LCD=y
CONFIG_HT16K33=y
CONFIG_LCD2S=y
CONFIG_PARPORT_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=n
CONFIG_CHARLCD_BL_OFF=y
CONFIG_CHARLCD_BL_ON=n
CONFIG_CHARLCD_BL_FLASH=n
CONFIG_PANEL=y
CONFIG_UIO=n
CONFIG_VFIO=y
CONFIG_VFIO_IOMMU_TYPE1=y
CONFIG_VFIO_VIRQFD=y
CONFIG_VFIO_NOIOMMU=n
CONFIG_VFIO_PCI_CORE=y
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI=y
CONFIG_VFIO_PCI_IGD=n
CONFIG_VFIO_MDEV=n
CONFIG_IRQ_BYPASS_MANAGER=y
CONFIG_VIRT_DRIVERS=n
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=n
CONFIG_VIRTIO_BALLOON=n
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
CONFIG_VDPA=n
CONFIG_VHOST_MENU=n

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=n
# end of Microsoft Hyper-V guest support

CONFIG_GREYBUS=y
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=n
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=n
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=y
CONFIG_COMEDI_PCL724=y
CONFIG_COMEDI_PCL726=y
CONFIG_COMEDI_PCL730=y
CONFIG_COMEDI_PCL812=n
CONFIG_COMEDI_PCL816=y
CONFIG_COMEDI_PCL818=y
CONFIG_COMEDI_PCM3724=y
CONFIG_COMEDI_AMPLC_DIO200_ISA=n
CONFIG_COMEDI_AMPLC_PC236_ISA=y
CONFIG_COMEDI_AMPLC_PC263_ISA=y
CONFIG_COMEDI_RTI800=y
CONFIG_COMEDI_RTI802=y
CONFIG_COMEDI_DAC02=y
CONFIG_COMEDI_DAS16M1=y
CONFIG_COMEDI_DAS08_ISA=y
CONFIG_COMEDI_DAS16=y
CONFIG_COMEDI_DAS800=y
CONFIG_COMEDI_DAS1800=y
CONFIG_COMEDI_DAS6402=y
CONFIG_COMEDI_DT2801=y
CONFIG_COMEDI_DT2811=y
CONFIG_COMEDI_DT2814=y
CONFIG_COMEDI_DT2815=n
CONFIG_COMEDI_DT2817=n
CONFIG_COMEDI_DT282X=y
CONFIG_COMEDI_DMM32AT=n
CONFIG_COMEDI_FL512=n
CONFIG_COMEDI_AIO_AIO12_8=n
CONFIG_COMEDI_AIO_IIRO_16=y
CONFIG_COMEDI_II_PCI20KC=n
CONFIG_COMEDI_C6XDIGIO=y
CONFIG_COMEDI_MPC624=y
CONFIG_COMEDI_ADQ12B=y
CONFIG_COMEDI_NI_AT_A2150=y
CONFIG_COMEDI_NI_AT_AO=y
CONFIG_COMEDI_NI_ATMIO=y
CONFIG_COMEDI_NI_ATMIO16D=y
CONFIG_COMEDI_NI_LABPC_ISA=y
CONFIG_COMEDI_PCMAD=n
CONFIG_COMEDI_PCMDA12=y
CONFIG_COMEDI_PCMMIO=y
CONFIG_COMEDI_PCMUIO=y
CONFIG_COMEDI_MULTIQ3=y
CONFIG_COMEDI_S526=n
CONFIG_COMEDI_PCI_DRIVERS=y
CONFIG_COMEDI_8255_PCI=y
CONFIG_COMEDI_ADDI_WATCHDOG=y
CONFIG_COMEDI_ADDI_APCI_1032=n
CONFIG_COMEDI_ADDI_APCI_1500=y
CONFIG_COMEDI_ADDI_APCI_1516=y
CONFIG_COMEDI_ADDI_APCI_1564=y
CONFIG_COMEDI_ADDI_APCI_16XX=y
CONFIG_COMEDI_ADDI_APCI_2032=y
CONFIG_COMEDI_ADDI_APCI_2200=y
CONFIG_COMEDI_ADDI_APCI_3120=n
CONFIG_COMEDI_ADDI_APCI_3501=y
CONFIG_COMEDI_ADDI_APCI_3XXX=n
CONFIG_COMEDI_ADL_PCI6208=y
CONFIG_COMEDI_ADL_PCI7X3X=y
CONFIG_COMEDI_ADL_PCI8164=y
CONFIG_COMEDI_ADL_PCI9111=y
CONFIG_COMEDI_ADL_PCI9118=n
CONFIG_COMEDI_ADV_PCI1710=y
CONFIG_COMEDI_ADV_PCI1720=y
CONFIG_COMEDI_ADV_PCI1723=y
CONFIG_COMEDI_ADV_PCI1724=n
CONFIG_COMEDI_ADV_PCI1760=y
CONFIG_COMEDI_ADV_PCI_DIO=n
CONFIG_COMEDI_AMPLC_DIO200_PCI=y
CONFIG_COMEDI_AMPLC_PC236_PCI=y
CONFIG_COMEDI_AMPLC_PC263_PCI=y
CONFIG_COMEDI_AMPLC_PCI224=y
CONFIG_COMEDI_AMPLC_PCI230=n
CONFIG_COMEDI_CONTEC_PCI_DIO=y
CONFIG_COMEDI_DAS08_PCI=y
CONFIG_COMEDI_DT3000=y
CONFIG_COMEDI_DYNA_PCI10XX=y
CONFIG_COMEDI_GSC_HPDI=y
CONFIG_COMEDI_MF6X4=y
CONFIG_COMEDI_ICP_MULTI=n
CONFIG_COMEDI_DAQBOARD2000=y
CONFIG_COMEDI_JR3_PCI=y
CONFIG_COMEDI_KE_COUNTER=y
CONFIG_COMEDI_CB_PCIDAS64=y
CONFIG_COMEDI_CB_PCIDAS=n
CONFIG_COMEDI_CB_PCIDDA=y
CONFIG_COMEDI_CB_PCIMDAS=y
CONFIG_COMEDI_CB_PCIMDDA=n
CONFIG_COMEDI_ME4000=y
CONFIG_COMEDI_ME_DAQ=y
CONFIG_COMEDI_NI_6527=y
CONFIG_COMEDI_NI_65XX=n
CONFIG_COMEDI_NI_660X=n
CONFIG_COMEDI_NI_670X=y
CONFIG_COMEDI_NI_LABPC_PCI=y
CONFIG_COMEDI_NI_PCIDIO=y
CONFIG_COMEDI_NI_PCIMIO=y
CONFIG_COMEDI_RTD520=y
CONFIG_COMEDI_S626=y
CONFIG_COMEDI_MITE=y
CONFIG_COMEDI_NI_TIOCMD=y
CONFIG_COMEDI_PCMCIA_DRIVERS=y
CONFIG_COMEDI_CB_DAS16_CS=y
CONFIG_COMEDI_DAS08_CS=n
CONFIG_COMEDI_NI_DAQ_700_CS=n
CONFIG_COMEDI_NI_DAQ_DIO24_CS=y
CONFIG_COMEDI_NI_LABPC_CS=y
CONFIG_COMEDI_NI_MIO_CS=y
CONFIG_COMEDI_QUATECH_DAQP_CS=n
CONFIG_COMEDI_8254=y
CONFIG_COMEDI_8255=y
CONFIG_COMEDI_8255_SA=y
CONFIG_COMEDI_KCOMEDILIB=y
CONFIG_COMEDI_AMPLC_DIO200=y
CONFIG_COMEDI_AMPLC_PC236=y
CONFIG_COMEDI_DAS08=y
CONFIG_COMEDI_ISADMA=y
CONFIG_COMEDI_NI_LABPC=y
CONFIG_COMEDI_NI_LABPC_ISADMA=y
CONFIG_COMEDI_NI_TIO=y
CONFIG_COMEDI_NI_ROUTING=y
CONFIG_COMEDI_TESTS=n
CONFIG_STAGING=n
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACPI_WMI=n
CONFIG_ACERHDF=n
CONFIG_ACER_WIRELESS=n
CONFIG_ADV_SWBUTTON=n
CONFIG_APPLE_GMUX=n
CONFIG_ASUS_LAPTOP=n
CONFIG_ASUS_WIRELESS=n
CONFIG_ASUS_TF103C_DOCK=n
CONFIG_MERAKI_MX100=n
CONFIG_EEEPC_LAPTOP=n
CONFIG_X86_PLATFORM_DRIVERS_DELL=y
CONFIG_DCDBAS=y
CONFIG_DELL_RBU=y
CONFIG_DELL_SMBIOS=n
CONFIG_DELL_SMO8800=m
CONFIG_FUJITSU_LAPTOP=n
CONFIG_FUJITSU_TABLET=n
CONFIG_GPD_POCKET_FAN=n
CONFIG_HP_ACCEL=n
CONFIG_WIRELESS_HOTKEY=n
CONFIG_IBM_RTL=y
CONFIG_SENSORS_HDAPS=y
CONFIG_THINKPAD_ACPI=n
CONFIG_INTEL_ATOMISP2_PDX86=y
CONFIG_INTEL_ATOMISP2_PM=y
CONFIG_INTEL_SAR_INT1092=n
CONFIG_INTEL_SKL_INT3472=n
CONFIG_INTEL_PMC_CORE=n
CONFIG_INTEL_PMT_CLASS=y
CONFIG_INTEL_PMT_TELEMETRY=y
CONFIG_INTEL_PMT_CRASHLOG=n
CONFIG_INTEL_HID_EVENT=n
CONFIG_INTEL_VBTN=n
CONFIG_INTEL_INT0002_VGPIO=n
CONFIG_INTEL_PUNIT_IPC=y
CONFIG_INTEL_RST=n
CONFIG_INTEL_SMARTCONNECT=n
CONFIG_INTEL_VSEC=y
CONFIG_XO15_EBOOK=n
CONFIG_PCENGINES_APU2=n
CONFIG_BARCO_P50_GPIO=y
CONFIG_SAMSUNG_LAPTOP=y
CONFIG_SAMSUNG_Q10=n
CONFIG_TOSHIBA_BT_RFKILL=n
CONFIG_TOSHIBA_HAPS=n
CONFIG_ACPI_CMPC=n
CONFIG_PANASONIC_LAPTOP=n
CONFIG_SYSTEM76_ACPI=n
CONFIG_TOPSTAR_LAPTOP=n
CONFIG_MLX_PLATFORM=y
CONFIG_INTEL_IPS=n
CONFIG_INTEL_SCU_IPC=y
CONFIG_INTEL_SCU=y
CONFIG_INTEL_SCU_PCI=y
CONFIG_INTEL_SCU_PLATFORM=n
CONFIG_INTEL_SCU_IPC_UTIL=y
CONFIG_SIEMENS_SIMATIC_IPC=n
CONFIG_PMC_ATOM=y
CONFIG_GOLDFISH_PIPE=n
CONFIG_CHROME_PLATFORMS=n
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=y
CONFIG_MLXREG_IO=n
CONFIG_MLXREG_LC=y
CONFIG_OLPC_EC=y
CONFIG_SURFACE_PLATFORMS=n
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_WM831X=y
CONFIG_COMMON_CLK_MAX9485=n
CONFIG_COMMON_CLK_SI5341=n
CONFIG_COMMON_CLK_SI5351=n
CONFIG_COMMON_CLK_SI514=n
CONFIG_COMMON_CLK_SI544=n
CONFIG_COMMON_CLK_SI570=y
CONFIG_COMMON_CLK_CDCE706=y
CONFIG_COMMON_CLK_CDCE925=n
CONFIG_COMMON_CLK_CS2000_CP=y
CONFIG_COMMON_CLK_AXI_CLKGEN=n
CONFIG_COMMON_CLK_LOCHNAGAR=y
CONFIG_COMMON_CLK_PWM=y
CONFIG_COMMON_CLK_VC5=n
CONFIG_COMMON_CLK_BD718XX=y
CONFIG_COMMON_CLK_FIXED_MMIO=y
CONFIG_CLK_LGM_CGU=n
CONFIG_XILINX_VCU=n
CONFIG_HWSPINLOCK=n

#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_MICROCHIP_PIT64B=y
# end of Clock Source drivers

CONFIG_MAILBOX=n
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support

CONFIG_IOMMU_DEBUGFS=y
CONFIG_IOMMU_DEFAULT_DMA_STRICT=n
CONFIG_IOMMU_DEFAULT_DMA_LAZY=n
CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y
CONFIG_OF_IOMMU=y
CONFIG_VIRTIO_IOMMU=n

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=n
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CHAR=n
CONFIG_RPMSG_CTRL=n
CONFIG_RPMSG_NS=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers

CONFIG_SOUNDWIRE=y

#
# SoundWire Devices
#
CONFIG_SOUNDWIRE_INTEL=n
CONFIG_SOUNDWIRE_QCOM=n

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
CONFIG_LITEX=y
CONFIG_LITEX_SOC_CONTROLLER=y
# end of Enable LiteX SoC Builder specific drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

CONFIG_SOC_TI=y

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=n
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y

#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=n
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_FSA9480=y
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_INTEL_INT3496=n
CONFIG_EXTCON_MAX3355=n
CONFIG_EXTCON_MAX8997=y
CONFIG_EXTCON_PTN5150=y
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=n
CONFIG_EXTCON_USBC_TUSB320=y
CONFIG_MEMORY=n
CONFIG_IIO=n
CONFIG_NTB=y
CONFIG_NTB_IDT=y
CONFIG_NTB_EPF=n
CONFIG_NTB_SWITCHTEC=y
CONFIG_NTB_PINGPONG=n
CONFIG_NTB_TOOL=y
CONFIG_NTB_PERF=y
CONFIG_NTB_TRANSPORT=y
CONFIG_VME_BUS=y

#
# VME Bridge Drivers
#
CONFIG_VME_CA91CX42=n
CONFIG_VME_TSI148=n
CONFIG_VME_FAKE=y

#
# VME Board Drivers
#
CONFIG_VMIVME_7805=y

#
# VME Device Drivers
#
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_DEBUG=n
CONFIG_PWM_ATMEL_TCB=y
CONFIG_PWM_DWC=y
CONFIG_PWM_FSL_FTM=n
CONFIG_PWM_INTEL_LGM=y
CONFIG_PWM_IQS620A=n
CONFIG_PWM_LP3943=n
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PCI=y
CONFIG_PWM_LPSS_PLATFORM=n
CONFIG_PWM_NTXEC=n
CONFIG_PWM_PCA9685=n
CONFIG_PWM_TWL=n
CONFIG_PWM_TWL_LED=n

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_AL_FIC=n
CONFIG_MADERA_IRQ=y
# end of IRQ chip support

CONFIG_IPACK_BUS=n
CONFIG_RESET_CONTROLLER=n

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_USB_LGM_PHY=n
CONFIG_PHY_CAN_TRANSCEIVER=y

#
# PHY drivers for Broadcom platforms
#
CONFIG_BCM_KONA_USB2_PHY=y
# end of PHY drivers for Broadcom platforms

CONFIG_PHY_CADENCE_TORRENT=y
CONFIG_PHY_CADENCE_DPHY=y
CONFIG_PHY_CADENCE_DPHY_RX=n
CONFIG_PHY_CADENCE_SALVO=y
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=n
CONFIG_PHY_LAN966X_SERDES=y
CONFIG_PHY_MAPPHONE_MDM6600=n
CONFIG_PHY_OCELOT_SERDES=y
CONFIG_PHY_INTEL_LGM_COMBO=y
CONFIG_PHY_INTEL_LGM_EMMC=y
# end of PHY Subsystem

CONFIG_POWERCAP=n
CONFIG_MCB=y
CONFIG_MCB_PCI=y
CONFIG_MCB_LPC=n

#
# Performance monitor support
#
# end of Performance monitor support

CONFIG_RAS=y
CONFIG_USB4=y
CONFIG_USB4_DEBUGFS_WRITE=n
CONFIG_USB4_DMA_TEST=n

#
# Android
#
CONFIG_ANDROID=n
# end of Android

CONFIG_DAX=y
CONFIG_DEV_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_RMEM=y

#
# HW tracing support
#
CONFIG_STM=n
CONFIG_INTEL_TH=y
CONFIG_INTEL_TH_PCI=y
CONFIG_INTEL_TH_ACPI=n
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_MSU=y
CONFIG_INTEL_TH_PTI=y
CONFIG_INTEL_TH_DEBUG=n
# end of HW tracing support

CONFIG_FPGA=y
CONFIG_ALTERA_PR_IP_CORE=n
CONFIG_FPGA_MGR_ALTERA_CVP=y
CONFIG_FPGA_BRIDGE=n
CONFIG_FPGA_DFL=n
CONFIG_FSI=n
CONFIG_MULTIPLEXER=y

#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=y
CONFIG_MUX_GPIO=y
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers

CONFIG_PM_OPP=y
CONFIG_SIOX=y
CONFIG_SIOX_BUS_GPIO=y
CONFIG_SLIMBUS=n
CONFIG_INTERCONNECT=y
CONFIG_COUNTER=n
CONFIG_MOST=y
CONFIG_MOST_CDEV=n
CONFIG_MOST_SND=n
CONFIG_PECI=n
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=n
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_VERITY=n
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=n
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=n
CONFIG_QUOTA=n
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=n
CONFIG_VIRTIO_FS=n
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=n
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_NFS_EXPORT=y
CONFIG_OVERLAY_FS_METACOPY=n

#
# Caches
#
CONFIG_NETFS_SUPPORT=y
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=n
CONFIG_FSCACHE_DEBUG=y
# end of Caches

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=n
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=n
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
CONFIG_ECRYPT_FS=y
CONFIG_ECRYPT_FS_MESSAGING=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=n
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=n
CONFIG_JFFS2_FS_SECURITY=n
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=n
CONFIG_JFFS2_RUBIN=y
CONFIG_JFFS2_CMODE_NONE=n
CONFIG_JFFS2_CMODE_PRIORITY=n
CONFIG_JFFS2_CMODE_SIZE=n
CONFIG_JFFS2_CMODE_FAVOURLZO=y
CONFIG_CRAMFS=n
CONFIG_ROMFS_FS=n
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_DEFLATE_COMPRESS=n
CONFIG_PSTORE_LZO_COMPRESS=y
CONFIG_PSTORE_LZ4_COMPRESS=y
CONFIG_PSTORE_LZ4HC_COMPRESS=y
CONFIG_PSTORE_842_COMPRESS=y
CONFIG_PSTORE_ZSTD_COMPRESS=y
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_LZO_COMPRESS_DEFAULT=n
CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT=n
CONFIG_PSTORE_LZ4HC_COMPRESS_DEFAULT=y
CONFIG_PSTORE_842_COMPRESS_DEFAULT=n
CONFIG_PSTORE_ZSTD_COMPRESS_DEFAULT=n
CONFIG_PSTORE_COMPRESS_DEFAULT="lz4hc"
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=n
CONFIG_PSTORE_RAM=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=n
CONFIG_NFS_V4=m
CONFIG_NFS_V4_1=n
CONFIG_ROOT_NFS=n
CONFIG_NFS_FSCACHE=n
CONFIG_NFS_USE_LEGACY_DNS=n
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
CONFIG_NFSD=n
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=n
CONFIG_SUNRPC_DEBUG=n
CONFIG_CEPH_FS=n
CONFIG_CIFS=m
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_UPCALL=n
CONFIG_CIFS_XATTR=n
CONFIG_CIFS_DEBUG=y
CONFIG_CIFS_DEBUG2=n
CONFIG_CIFS_DEBUG_DUMP_KEYS=n
CONFIG_CIFS_DFS_UPCALL=n
CONFIG_CIFS_SWN_UPCALL=n
CONFIG_CIFS_FSCACHE=n
CONFIG_SMB_SERVER=n
CONFIG_SMBFS_COMMON=m
CONFIG_CODA_FS=n
CONFIG_AFS_FS=n
CONFIG_9P_FS=n
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=n
CONFIG_NLS_CODEPAGE_737=n
CONFIG_NLS_CODEPAGE_775=n
CONFIG_NLS_CODEPAGE_850=n
CONFIG_NLS_CODEPAGE_852=n
CONFIG_NLS_CODEPAGE_855=n
CONFIG_NLS_CODEPAGE_857=n
CONFIG_NLS_CODEPAGE_860=n
CONFIG_NLS_CODEPAGE_861=n
CONFIG_NLS_CODEPAGE_862=n
CONFIG_NLS_CODEPAGE_863=n
CONFIG_NLS_CODEPAGE_864=n
CONFIG_NLS_CODEPAGE_865=n
CONFIG_NLS_CODEPAGE_866=n
CONFIG_NLS_CODEPAGE_869=n
CONFIG_NLS_CODEPAGE_936=n
CONFIG_NLS_CODEPAGE_950=n
CONFIG_NLS_CODEPAGE_932=n
CONFIG_NLS_CODEPAGE_949=n
CONFIG_NLS_CODEPAGE_874=n
CONFIG_NLS_ISO8859_8=n
CONFIG_NLS_CODEPAGE_1250=n
CONFIG_NLS_CODEPAGE_1251=n
CONFIG_NLS_ASCII=n
CONFIG_NLS_ISO8859_1=n
CONFIG_NLS_ISO8859_2=n
CONFIG_NLS_ISO8859_3=n
CONFIG_NLS_ISO8859_4=n
CONFIG_NLS_ISO8859_5=n
CONFIG_NLS_ISO8859_6=n
CONFIG_NLS_ISO8859_7=n
CONFIG_NLS_ISO8859_9=n
CONFIG_NLS_ISO8859_13=n
CONFIG_NLS_ISO8859_14=n
CONFIG_NLS_ISO8859_15=n
CONFIG_NLS_KOI8_R=n
CONFIG_NLS_KOI8_U=n
CONFIG_NLS_MAC_ROMAN=n
CONFIG_NLS_MAC_CELTIC=n
CONFIG_NLS_MAC_CENTEURO=n
CONFIG_NLS_MAC_CROATIAN=n
CONFIG_NLS_MAC_CYRILLIC=n
CONFIG_NLS_MAC_GAELIC=n
CONFIG_NLS_MAC_GREEK=n
CONFIG_NLS_MAC_ICELAND=n
CONFIG_NLS_MAC_INUIT=n
CONFIG_NLS_MAC_ROMANIAN=n
CONFIG_NLS_MAC_TURKISH=n
CONFIG_NLS_UTF8=n
CONFIG_DLM=n
CONFIG_UNICODE=n
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=n
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_USER_DECRYPTED_DATA=n
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=n
CONFIG_SECURITY=y
CONFIG_SECURITYFS=n
CONFIG_SECURITY_NETWORK=n
CONFIG_SECURITY_PATH=n
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY_PAGESPAN=n
CONFIG_FORTIFY_SOURCE=y
CONFIG_STATIC_USERMODEHELPER=n
CONFIG_SECURITY_SMACK=n
CONFIG_SECURITY_TOMOYO=n
CONFIG_SECURITY_APPARMOR=n
CONFIG_SECURITY_YAMA=n
CONFIG_SECURITY_SAFESETID=n
CONFIG_SECURITY_LOCKDOWN_LSM=n
CONFIG_SECURITY_LANDLOCK=n
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=n
CONFIG_IMA=n
CONFIG_EVM=n
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
CONFIG_INIT_ON_FREE_DEFAULT_ON=n
# end of Memory initialization
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=n
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=n
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_ENGINE=y

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_DH_RFC7919_GROUPS=n
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECDSA=n
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_SM2=y
CONFIG_CRYPTO_CURVE25519=n

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=n
CONFIG_CRYPTO_AEGIS128=n
CONFIG_CRYPTO_SEQIV=n
CONFIG_CRYPTO_ECHAINIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=n
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=n
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=n
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=n
CONFIG_CRYPTO_NHPOLY1305=y
CONFIG_CRYPTO_ADIANTUM=y
CONFIG_CRYPTO_ESSIV=y

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32_PCLMUL=n
CONFIG_CRYPTO_XXHASH=y
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_BLAKE2S=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=n
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=n
CONFIG_CRYPTO_RMD160=n
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
CONFIG_CRYPTO_AES_NI_INTEL=n
CONFIG_CRYPTO_BLOWFISH=n
CONFIG_CRYPTO_CAMELLIA=n
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_586=y
CONFIG_CRYPTO_SM4=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=n

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=n
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=n
CONFIG_CRYPTO_DRBG_CTR=n
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_KDF800108_CTR=y
CONFIG_CRYPTO_USER_API_HASH=n
CONFIG_CRYPTO_USER_API_SKCIPHER=n
CONFIG_CRYPTO_USER_API_RNG=n
CONFIG_CRYPTO_USER_API_AEAD=n
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=n
CONFIG_CRYPTO_DEV_GEODE=n
CONFIG_CRYPTO_DEV_HIFN_795X=y
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_CRYPTO_DEV_ATMEL_I2C=y
CONFIG_CRYPTO_DEV_ATMEL_ECC=y
CONFIG_CRYPTO_DEV_ATMEL_SHA204A=y
CONFIG_CRYPTO_DEV_CCP=n
CONFIG_CRYPTO_DEV_QAT=y
CONFIG_CRYPTO_DEV_QAT_DH895xCC=n
CONFIG_CRYPTO_DEV_QAT_C3XXX=y
CONFIG_CRYPTO_DEV_QAT_C62X=y
CONFIG_CRYPTO_DEV_QAT_4XXX=n
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=y
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=n
CONFIG_CRYPTO_DEV_QAT_C62XVF=y
CONFIG_CRYPTO_DEV_VIRTIO=y
CONFIG_CRYPTO_DEV_SAFEXCEL=n
CONFIG_CRYPTO_DEV_CCREE=y
CONFIG_CRYPTO_DEV_AMLOGIC_GXL=y
CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG=y
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=n

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=n
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=n
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_LIB_SM3=y
CONFIG_CRYPTO_LIB_SM4=y
# end of Crypto library routines

CONFIG_CRC_CCITT=n
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=n
CONFIG_CRC64_ROCKSOFT=n
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=n
CONFIG_CRC32_SLICEBY8=n
CONFIG_CRC32_SLICEBY4=y
CONFIG_CRC32_SARWATE=n
CONFIG_CRC32_BIT=n
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_RANDOM32_SELFTEST=n
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=n
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_MICROLZMA=n
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=n
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_BCH=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_DMA_CMA=y
CONFIG_DMA_PERNUMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CMA_SIZE_SEL_MBYTES=y
CONFIG_CMA_SIZE_SEL_PERCENTAGE=n
CONFIG_CMA_SIZE_SEL_MIN=n
CONFIG_CMA_SIZE_SEL_MAX=n
CONFIG_CMA_ALIGNMENT=8
CONFIG_DMA_API_DEBUG=n
CONFIG_DMA_MAP_BENCHMARK=y
CONFIG_SGL_ALLOC=y
CONFIG_CPUMASK_OFFSTACK=n
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=n
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=n
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_32=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACK_HASH_ORDER=20
CONFIG_REF_TRACKER=y
# end of Library routines

CONFIG_ASN1_ENCODER=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
CONFIG_STACKTRACE_BUILD_ID=n
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_DEBUG_SYNCHRO_TEST=n
CONFIG_BOOT_PRINTK_DELAY=n
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=n
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=n

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_NONE=n
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_DEBUG_INFO_DWARF4=n
CONFIG_DEBUG_INFO_DWARF5=n
CONFIG_DEBUG_INFO_REDUCED=y
CONFIG_DEBUG_INFO_COMPRESSED=n
CONFIG_DEBUG_INFO_SPLIT=n
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_GDB_SCRIPTS=y
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=n
CONFIG_READABLE_ASM=y
CONFIG_HEADERS_INSTALL=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_FRAME_POINTER=y
CONFIG_VMLINUX_MAP=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
CONFIG_DEBUG_FS_DISALLOW_MOUNT=n
CONFIG_DEBUG_FS_ALLOW_NONE=n
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=n
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
CONFIG_UBSAN_TRAP=n
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ONLY_BOUNDS=y
CONFIG_UBSAN_SHIFT=y
CONFIG_UBSAN_DIV_ZERO=n
CONFIG_UBSAN_UNREACHABLE=n
CONFIG_UBSAN_BOOL=n
CONFIG_UBSAN_ENUM=n
CONFIG_UBSAN_ALIGNMENT=n
CONFIG_UBSAN_SANITIZE_ALL=y
CONFIG_TEST_UBSAN=n
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
CONFIG_NET_DEV_REFCNT_TRACKER=y
CONFIG_NET_NS_REFCNT_TRACKER=y
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=n
CONFIG_PAGE_OWNER=n
CONFIG_PAGE_POISONING=n
CONFIG_DEBUG_PAGE_REF=n
CONFIG_DEBUG_RODATA_TEST=n
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
CONFIG_PTDUMP_DEBUGFS=n
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=n
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=n
CONFIG_DEBUG_OBJECTS_WORK=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=n
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=n
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM=n
CONFIG_DEBUG_VM_PGTABLE=n
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_DEBUG_KMAP_LOCAL=y
CONFIG_ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP=y
CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y
CONFIG_DEBUG_HIGHMEM=n
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_HAVE_ARCH_KFENCE=y
CONFIG_KFENCE=y
CONFIG_KFENCE_SAMPLE_INTERVAL=100
CONFIG_KFENCE_NUM_OBJECTS=255
CONFIG_KFENCE_DEFERRABLE=n
CONFIG_KFENCE_STRESS_TEST_FAULTS=0
# end of Memory Debugging

CONFIG_DEBUG_SHIRQ=n

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_HARDLOCKUP_DETECTOR=n
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=480
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
CONFIG_WQ_WATCHDOG=y
CONFIG_TEST_LOCKUP=n
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

CONFIG_DEBUG_TIMEKEEPING=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RAW_LOCK_NESTING=n
CONFIG_LOCK_STAT=n
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
CONFIG_DEBUG_LOCKDEP=n
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=n
CONFIG_LOCK_TORTURE_TEST=m
CONFIG_WW_MUTEX_SELFTEST=n
CONFIG_SCF_TORTURE_TEST=n
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_TRACE_IRQFLAGS=y
CONFIG_TRACE_IRQFLAGS_NMI=y
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=n
CONFIG_DEBUG_KOBJECT=n

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=n
CONFIG_DEBUG_SG=n
CONFIG_DEBUG_NOTIFIERS=n
CONFIG_BUG_ON_DATA_CORRUPTION=n
# end of Debug kernel data structures

CONFIG_DEBUG_CREDENTIALS=n

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_TORTURE_TEST=m
CONFIG_RCU_SCALE_TEST=m
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_REF_SCALE_TEST=n
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=n
CONFIG_RCU_EQS_DEBUG=n
# end of RCU Debugging

CONFIG_DEBUG_WQ_FORCE_RR_CPU=n
CONFIG_CPU_HOTPLUG_STATE_CONTROL=y
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_BOOTTIME_TRACING=n
CONFIG_FUNCTION_TRACER=n
CONFIG_STACK_TRACER=n
CONFIG_IRQSOFF_TRACER=y
CONFIG_SCHED_TRACER=n
CONFIG_HWLAT_TRACER=n
CONFIG_OSNOISE_TRACER=y
CONFIG_TIMERLAT_TRACER=y
CONFIG_MMIOTRACE=n
CONFIG_FTRACE_SYSCALLS=n
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_BRANCH_PROFILE_NONE=y
CONFIG_PROFILE_ANNOTATED_BRANCHES=n
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_SYNTH_EVENTS=y
CONFIG_USER_EVENTS=n
CONFIG_HIST_TRIGGERS=n
CONFIG_TRACE_EVENT_INJECT=n
CONFIG_TRACEPOINT_BENCHMARK=y
CONFIG_RING_BUFFER_BENCHMARK=y
CONFIG_TRACE_EVAL_MAP_FILE=n
CONFIG_FTRACE_STARTUP_TEST=n
CONFIG_RING_BUFFER_STARTUP_TEST=n
CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS=y
CONFIG_PREEMPTIRQ_DELAY_TEST=n
CONFIG_SYNTH_EVENT_GEN_TEST=n
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_SAMPLES=y
CONFIG_SAMPLE_AUXDISPLAY=y
CONFIG_SAMPLE_TRACE_EVENTS=n
CONFIG_SAMPLE_TRACE_CUSTOM_EVENTS=n
CONFIG_SAMPLE_TRACE_PRINTK=n
CONFIG_SAMPLE_TRACE_ARRAY=n
CONFIG_SAMPLE_KOBJECT=y
CONFIG_SAMPLE_HW_BREAKPOINT=n
CONFIG_SAMPLE_KFIFO=n
CONFIG_SAMPLE_RPMSG_CLIENT=n
CONFIG_SAMPLE_CONFIGFS=n
CONFIG_SAMPLE_FANOTIFY_ERROR=n
CONFIG_SAMPLE_HIDRAW=n
CONFIG_SAMPLE_LANDLOCK=y
CONFIG_SAMPLE_PIDFD=y
CONFIG_SAMPLE_SECCOMP=n
CONFIG_SAMPLE_TIMER=y
CONFIG_SAMPLE_UHID=y
CONFIG_SAMPLE_VFIO_MDEV_MDPY_FB=n
CONFIG_SAMPLE_ANDROID_BINDERFS=y
CONFIG_SAMPLE_VFS=y
CONFIG_SAMPLE_INTEL_MEI=n
CONFIG_SAMPLE_WATCHDOG=n
CONFIG_SAMPLE_WATCH_QUEUE=n
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y

#
# x86 Debugging
#
CONFIG_DEBUG_AID_FOR_SYZBOT=n
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_USB_XDBC=y
CONFIG_DEBUG_TLBFLUSH=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=n
CONFIG_IO_DELAY_0X80=n
CONFIG_IO_DELAY_0XED=n
CONFIG_IO_DELAY_UDELAY=n
CONFIG_IO_DELAY_NONE=y
CONFIG_DEBUG_BOOT_PARAMS=n
CONFIG_CPA_DEBUG=n
CONFIG_DEBUG_ENTRY=y
CONFIG_DEBUG_NMI_SELFTEST=n
CONFIG_X86_DEBUG_FPU=y
CONFIG_PUNIT_ATOM_DEBUG=y
CONFIG_UNWINDER_FRAME_POINTER=y
# end of x86 Debugging

#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=n
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=y
CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=n
CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=n
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=n
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAULT_INJECTION_USERCOPY=n
CONFIG_FAIL_FUTEX=n
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAIL_MMC_REQUEST=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=n
CONFIG_TEST_MIN_HEAP=n
CONFIG_TEST_DIV64=n
CONFIG_BACKTRACE_SELF_TEST=n
CONFIG_TEST_REF_TRACKER=n
CONFIG_RBTREE_TEST=n
CONFIG_REED_SOLOMON_TEST=n
CONFIG_INTERVAL_TREE_TEST=n
CONFIG_PERCPU_TEST=n
CONFIG_ATOMIC64_SELFTEST=n
CONFIG_TEST_HEXDUMP=n
CONFIG_STRING_SELFTEST=n
CONFIG_TEST_STRING_HELPERS=n
CONFIG_TEST_STRSCPY=n
CONFIG_TEST_KSTRTOX=n
CONFIG_TEST_PRINTF=n
CONFIG_TEST_SCANF=n
CONFIG_TEST_BITMAP=n
CONFIG_TEST_UUID=n
CONFIG_TEST_XARRAY=n
CONFIG_TEST_RHASHTABLE=n
CONFIG_TEST_SIPHASH=n
CONFIG_TEST_IDA=n
CONFIG_TEST_LKM=n
CONFIG_TEST_BITOPS=n
CONFIG_TEST_VMALLOC=n
CONFIG_TEST_USER_COPY=n
CONFIG_TEST_BPF=n
CONFIG_TEST_BLACKHOLE_DEV=n
CONFIG_FIND_BIT_BENCHMARK=n
CONFIG_TEST_FIRMWARE=n
CONFIG_TEST_SYSCTL=n
CONFIG_TEST_UDELAY=n
CONFIG_TEST_STATIC_KEYS=n
CONFIG_TEST_DEBUG_VIRTUAL=n
CONFIG_TEST_MEMCAT_P=n
CONFIG_TEST_MEMINIT=n
CONFIG_TEST_FREE_PAGES=n
CONFIG_TEST_FPU=n
CONFIG_TEST_CLOCKSOURCE_WATCHDOG=n
CONFIG_ARCH_USE_MEMTEST=y
CONFIG_MEMTEST=n
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking

[-- Attachment #3: job-script.ksh --]
[-- Type: text/plain, Size: 4783 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='boot'
	export testcase='boot'
	export category='functional'
	export timeout='10m'
	export job_origin='boot.yaml'
	export queue_cmdline_keys='branch
commit'
	export queue='validate'
	export testbox='vm-icl-74'
	export tbox_group='vm-icl'
	export branch='linux-review/Zi-Yan/Split-a-huge-page-to-any-lower-order-pages/20220321-222304'
	export commit='2757cee2d6c6c76f672ec6566ade2dcb8c1605dd'
	export kconfig='i386-randconfig-a013-20220321'
	export repeat_to=6
	export nr_vm=160
	export submit_id='6239b87c7f50e69ad9ce9eb3'
	export job_file='/lkp/jobs/scheduled/vm-icl-74/boot-1-debian-i386-20191205.cgz-2757cee2d6c6c76f672ec6566ade2dcb8c1605dd-20220322-39641-na3mp9-2.yaml'
	export id='1f903110bb362c394ded483eacf9f2d79fdd2374'
	export queuer_version='/lkp-src'
	export model='qemu-system-x86_64 -enable-kvm -cpu Icelake-Server'
	export nr_cpu=4
	export memory='16G'
	export need_kconfig=\{\"KVM_GUEST\"\=\>\"y\"\}
	export ssh_base_port=23600
	export kernel_cmdline='vmalloc=128M initramfs_async=0 page_owner=on'
	export rootfs='debian-i386-20191205.cgz'
	export compiler='gcc-9'
	export enqueue_time='2022-03-22 19:52:28 +0800'
	export _id='6239b87c7f50e69ad9ce9eb3'
	export _rt='/result/boot/1/vm-icl/debian-i386-20191205.cgz/i386-randconfig-a013-20220321/gcc-9/2757cee2d6c6c76f672ec6566ade2dcb8c1605dd'
	export user='lkp'
	export LKP_SERVER='internal-lkp-server'
	export result_root='/result/boot/1/vm-icl/debian-i386-20191205.cgz/i386-randconfig-a013-20220321/gcc-9/2757cee2d6c6c76f672ec6566ade2dcb8c1605dd/3'
	export scheduler_version='/lkp/lkp/.src-20220322-165139'
	export arch='i386'
	export max_uptime=600
	export initrd='/osimage/debian/debian-i386-20191205.cgz'
	export bootloader_append='root=/dev/ram0
RESULT_ROOT=/result/boot/1/vm-icl/debian-i386-20191205.cgz/i386-randconfig-a013-20220321/gcc-9/2757cee2d6c6c76f672ec6566ade2dcb8c1605dd/3
BOOT_IMAGE=/pkg/linux/i386-randconfig-a013-20220321/gcc-9/2757cee2d6c6c76f672ec6566ade2dcb8c1605dd/vmlinuz-5.17.0-rc8-mm1-00485-g2757cee2d6c6
branch=linux-review/Zi-Yan/Split-a-huge-page-to-any-lower-order-pages/20220321-222304
job=/lkp/jobs/scheduled/vm-icl-74/boot-1-debian-i386-20191205.cgz-2757cee2d6c6c76f672ec6566ade2dcb8c1605dd-20220322-39641-na3mp9-2.yaml
user=lkp
ARCH=i386
kconfig=i386-randconfig-a013-20220321
commit=2757cee2d6c6c76f672ec6566ade2dcb8c1605dd
vmalloc=128M initramfs_async=0 page_owner=on
max_uptime=600
LKP_SERVER=internal-lkp-server
selinux=0
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
console=tty0
earlyprintk=ttyS0,115200
console=ttyS0,115200
vga=normal
rw'
	export modules_initrd='/pkg/linux/i386-randconfig-a013-20220321/gcc-9/2757cee2d6c6c76f672ec6566ade2dcb8c1605dd/modules.cgz'
	export bm_initrd='/osimage/deps/debian-i386-20191205.cgz/lkp_20201203.cgz'
	export lkp_initrd='/osimage/user/lkp/lkp-i386.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export schedule_notify_address=
	export kernel='/pkg/linux/i386-randconfig-a013-20220321/gcc-9/2757cee2d6c6c76f672ec6566ade2dcb8c1605dd/vmlinuz-5.17.0-rc8-mm1-00485-g2757cee2d6c6'
	export dequeue_time='2022-03-22 19:55:49 +0800'
	export job_initrd='/lkp/jobs/scheduled/vm-icl-74/boot-1-debian-i386-20191205.cgz-2757cee2d6c6c76f672ec6566ade2dcb8c1605dd-20220322-39641-na3mp9-2.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-slabinfo
	run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-meminfo
	run_monitor $LKP_SRC/monitors/one-shot/wrapper memmap
	run_monitor $LKP_SRC/monitors/no-stdout/wrapper boot-time
	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper heartbeat
	run_monitor $LKP_SRC/monitors/wrapper meminfo
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog

	run_test $LKP_SRC/tests/wrapper sleep 1
}

extract_stats()
{
	export stats_part_begin=
	export stats_part_end=

	$LKP_SRC/stats/wrapper boot-slabinfo
	$LKP_SRC/stats/wrapper boot-meminfo
	$LKP_SRC/stats/wrapper memmap
	$LKP_SRC/stats/wrapper boot-memory
	$LKP_SRC/stats/wrapper boot-time
	$LKP_SRC/stats/wrapper kernel-size
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper sleep
	$LKP_SRC/stats/wrapper meminfo

	$LKP_SRC/stats/wrapper time sleep.time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper last_state
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper time
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/x-xz, Size: 15936 bytes --]

[RFC PATCH 5/5] mm: huge_memory: enable debugfs to split huge pages to any order.

[Zi Yan]

From: Zi Yan <ziy@nvidia.com>

It is used to test split_huge_page_to_list_to_order for pagecache THPs.
Also add test cases for split_huge_page_to_list_to_order via both
debugfs, truncating a file, and punching holes in a file.

Signed-off-by: Zi Yan <ziy@nvidia.com>
---
 mm/huge_memory.c                              |  26 ++-
 .../selftests/vm/split_huge_page_test.c       | 219 +++++++++++++++---
 2 files changed, 201 insertions(+), 44 deletions(-)

diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 76db0092a1e2..7645bb12fcbc 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2856,7 +2856,7 @@ static inline bool vma_not_suitable_for_thp_split(struct vm_area_struct *vma)
 }
 
 static int split_huge_pages_pid(int pid, unsigned long vaddr_start,
-				unsigned long vaddr_end)
+				unsigned long vaddr_end, unsigned int new_order)
 {
 	int ret = 0;
 	struct task_struct *task;
@@ -2926,7 +2926,7 @@ static int split_huge_pages_pid(int pid, unsigned long vaddr_start,
 		if (!trylock_page(page))
 			goto next;
 
-		if (!split_huge_page(page))
+		if (!split_huge_page_to_list_to_order(page, NULL, new_order))
 			split++;
 
 		unlock_page(page);
@@ -2944,7 +2944,7 @@ static int split_huge_pages_pid(int pid, unsigned long vaddr_start,
 }
 
 static int split_huge_pages_in_file(const char *file_path, pgoff_t off_start,
-				pgoff_t off_end)
+				pgoff_t off_end, unsigned int new_order)
 {
 	struct filename *file;
 	struct file *candidate;
@@ -2984,7 +2984,7 @@ static int split_huge_pages_in_file(const char *file_path, pgoff_t off_start,
 		if (!trylock_page(fpage))
 			goto next;
 
-		if (!split_huge_page(fpage))
+		if (!split_huge_page_to_list_to_order(fpage, NULL, new_order))
 			split++;
 
 		unlock_page(fpage);
@@ -3009,10 +3009,14 @@ static ssize_t split_huge_pages_write(struct file *file, const char __user *buf,
 {
 	static DEFINE_MUTEX(split_debug_mutex);
 	ssize_t ret;
-	/* hold pid, start_vaddr, end_vaddr or file_path, off_start, off_end */
+	/*
+	 * hold pid, start_vaddr, end_vaddr, new_order or
+	 * file_path, off_start, off_end, new_order
+	 */
 	char input_buf[MAX_INPUT_BUF_SZ];
 	int pid;
 	unsigned long vaddr_start, vaddr_end;
+	unsigned int new_order = 0;
 
 	ret = mutex_lock_interruptible(&split_debug_mutex);
 	if (ret)
@@ -3041,29 +3045,29 @@ static ssize_t split_huge_pages_write(struct file *file, const char __user *buf,
 			goto out;
 		}
 
-		ret = sscanf(buf, "0x%lx,0x%lx", &off_start, &off_end);
-		if (ret != 2) {
+		ret = sscanf(buf, "0x%lx,0x%lx,%d", &off_start, &off_end, &new_order);
+		if (ret != 2 && ret != 3) {
 			ret = -EINVAL;
 			goto out;
 		}
-		ret = split_huge_pages_in_file(file_path, off_start, off_end);
+		ret = split_huge_pages_in_file(file_path, off_start, off_end, new_order);
 		if (!ret)
 			ret = input_len;
 
 		goto out;
 	}
 
-	ret = sscanf(input_buf, "%d,0x%lx,0x%lx", &pid, &vaddr_start, &vaddr_end);
+	ret = sscanf(input_buf, "%d,0x%lx,0x%lx,%d", &pid, &vaddr_start, &vaddr_end, &new_order);
 	if (ret == 1 && pid == 1) {
 		split_huge_pages_all();
 		ret = strlen(input_buf);
 		goto out;
-	} else if (ret != 3) {
+	} else if (ret != 3 && ret != 4) {
 		ret = -EINVAL;
 		goto out;
 	}
 
-	ret = split_huge_pages_pid(pid, vaddr_start, vaddr_end);
+	ret = split_huge_pages_pid(pid, vaddr_start, vaddr_end, new_order);
 	if (!ret)
 		ret = strlen(input_buf);
 out:
diff --git a/tools/testing/selftests/vm/split_huge_page_test.c b/tools/testing/selftests/vm/split_huge_page_test.c
index 52497b7b9f1d..af01e7dca9c8 100644
--- a/tools/testing/selftests/vm/split_huge_page_test.c
+++ b/tools/testing/selftests/vm/split_huge_page_test.c
@@ -16,6 +16,7 @@
 #include <sys/mount.h>
 #include <malloc.h>
 #include <stdbool.h>
+#include <time.h>
 
 uint64_t pagesize;
 unsigned int pageshift;
@@ -24,10 +25,11 @@ uint64_t pmd_pagesize;
 #define PMD_SIZE_PATH "/sys/kernel/mm/transparent_hugepage/hpage_pmd_size"
 #define SPLIT_DEBUGFS "/sys/kernel/debug/split_huge_pages"
 #define SMAP_PATH "/proc/self/smaps"
+#define THP_FS_PATH "/mnt/thp_fs"
 #define INPUT_MAX 80
 
-#define PID_FMT "%d,0x%lx,0x%lx"
-#define PATH_FMT "%s,0x%lx,0x%lx"
+#define PID_FMT "%d,0x%lx,0x%lx,%d"
+#define PATH_FMT "%s,0x%lx,0x%lx,%d"
 
 #define PFN_MASK     ((1UL<<55)-1)
 #define KPF_THP      (1UL<<22)
@@ -75,23 +77,6 @@ static uint64_t read_pmd_pagesize(void)
 	return strtoul(buf, NULL, 10);
 }
 
-static int write_file(const char *path, const char *buf, size_t buflen)
-{
-	int fd;
-	ssize_t numwritten;
-
-	fd = open(path, O_WRONLY);
-	if (fd == -1)
-		return 0;
-
-	numwritten = write(fd, buf, buflen - 1);
-	close(fd);
-	if (numwritten < 1)
-		return 0;
-
-	return (unsigned int) numwritten;
-}
-
 static void write_debugfs(const char *fmt, ...)
 {
 	char input[INPUT_MAX];
@@ -106,11 +91,6 @@ static void write_debugfs(const char *fmt, ...)
 		printf("%s: Debugfs input is too long\n", __func__);
 		exit(EXIT_FAILURE);
 	}
-
-	if (!write_file(SPLIT_DEBUGFS, input, ret + 1)) {
-		perror(SPLIT_DEBUGFS);
-		exit(EXIT_FAILURE);
-	}
 }
 
 #define MAX_LINE_LENGTH 500
@@ -124,7 +104,7 @@ static bool check_for_pattern(FILE *fp, const char *pattern, char *buf)
 	return false;
 }
 
-static uint64_t check_huge(void *addr)
+static uint64_t check_huge(void *addr, const char *prefix)
 {
 	uint64_t thp = 0;
 	int ret;
@@ -149,13 +129,13 @@ static uint64_t check_huge(void *addr)
 		goto err_out;
 
 	/*
-	 * Fetch the AnonHugePages: in the same block and check the number of
+	 * Fetch the @prefix in the same block and check the number of
 	 * hugepages.
 	 */
-	if (!check_for_pattern(fp, "AnonHugePages:", buffer))
+	if (!check_for_pattern(fp, prefix, buffer))
 		goto err_out;
 
-	if (sscanf(buffer, "AnonHugePages:%10ld kB", &thp) != 1) {
+	if (sscanf(&buffer[strlen(prefix)], "%10ld kB", &thp) != 1) {
 		printf("Reading smap error\n");
 		exit(EXIT_FAILURE);
 	}
@@ -184,7 +164,7 @@ void split_pmd_thp(void)
 	for (i = 0; i < len; i++)
 		one_page[i] = (char)i;
 
-	thp_size = check_huge(one_page);
+	thp_size = check_huge(one_page, "AnonHugePages:");
 	if (!thp_size) {
 		printf("No THP is allocated\n");
 		exit(EXIT_FAILURE);
@@ -192,7 +172,7 @@ void split_pmd_thp(void)
 
 	/* split all THPs */
 	write_debugfs(PID_FMT, getpid(), (uint64_t)one_page,
-		(uint64_t)one_page + len);
+		(uint64_t)one_page + len, 0);
 
 	for (i = 0; i < len; i++)
 		if (one_page[i] != (char)i) {
@@ -201,7 +181,7 @@ void split_pmd_thp(void)
 		}
 
 
-	thp_size = check_huge(one_page);
+	thp_size = check_huge(one_page, "AnonHugePages:");
 	if (thp_size) {
 		printf("Still %ld kB AnonHugePages not split\n", thp_size);
 		exit(EXIT_FAILURE);
@@ -249,7 +229,7 @@ void split_pte_mapped_thp(void)
 	for (i = 0; i < len; i++)
 		one_page[i] = (char)i;
 
-	thp_size = check_huge(one_page);
+	thp_size = check_huge(one_page, "AnonHugePages:");
 	if (!thp_size) {
 		printf("No THP is allocated\n");
 		exit(EXIT_FAILURE);
@@ -284,7 +264,7 @@ void split_pte_mapped_thp(void)
 
 	/* split all remapped THPs */
 	write_debugfs(PID_FMT, getpid(), (uint64_t)pte_mapped,
-		      (uint64_t)pte_mapped + pagesize * 4);
+		      (uint64_t)pte_mapped + pagesize * 4, 0);
 
 	/* smap does not show THPs after mremap, use kpageflags instead */
 	thp_size = 0;
@@ -371,20 +351,193 @@ void split_file_backed_thp(void)
 	printf("file-backed THP split test done, please check dmesg for more information\n");
 }
 
+void create_pagecache_thp_and_fd(const char *testfile, size_t fd_size, int *fd, char **addr)
+{
+	size_t i;
+	int dummy;
+
+	srand(time(NULL));
+
+	*fd = open(testfile, O_CREAT | O_RDWR, 0664);
+	if (*fd == -1) {
+		perror("Failed to create a file at "THP_FS_PATH);
+		exit(EXIT_FAILURE);
+	}
+
+	for (i = 0; i < fd_size; i++) {
+		unsigned char byte = (unsigned char)i;
+
+		write(*fd, &byte, sizeof(byte));
+	}
+	close(*fd);
+	sync();
+	*fd = open("/proc/sys/vm/drop_caches", O_WRONLY);
+	if (*fd == -1) {
+		perror("open drop_caches");
+		exit(EXIT_FAILURE);
+	}
+	if (write(*fd, "3", 1) != 1) {
+		perror("write to drop_caches");
+		exit(EXIT_FAILURE);
+	}
+	close(*fd);
+
+	*fd = open(testfile, O_RDWR);
+	if (*fd == -1) {
+		perror("Failed to open a file at "THP_FS_PATH);
+		exit(EXIT_FAILURE);
+	}
+
+	*addr = mmap(NULL, fd_size, PROT_READ|PROT_WRITE, MAP_SHARED, *fd, 0);
+	if (*addr == (char *)-1) {
+		perror("cannot mmap");
+		exit(1);
+	}
+	madvise(*addr, fd_size, MADV_HUGEPAGE);
+
+	for (size_t i = 0; i < fd_size; i++)
+		dummy += *(*addr + i);
+
+	if (!check_huge(*addr, "FilePmdMapped:")) {
+		printf("No pagecache THP generated, please mount a filesystem "
+			"supporting pagecache THP at "THP_FS_PATH"\n");
+		exit(EXIT_FAILURE);
+	}
+}
+
+void split_thp_in_pagecache_to_order(size_t fd_size, int order)
+{
+	int fd;
+	char *addr;
+	size_t i;
+	const char testfile[] = THP_FS_PATH "/test";
+
+	create_pagecache_thp_and_fd(testfile, fd_size, &fd, &addr);
+
+	printf("split %ld kB pagecache page to order %d ... ", fd_size >> 10, order);
+	write_debugfs(PID_FMT, getpid(), (uint64_t)addr, (uint64_t)addr + fd_size, order);
+
+	for (i = 0; i < fd_size; i++)
+		if (*(addr + i) != (char)i) {
+			printf("%lu byte corrupted in the file\n", i);
+			exit(EXIT_FAILURE);
+		}
+
+	close(fd);
+	unlink(testfile);
+	printf("done\n");
+}
+
+void truncate_thp_in_pagecache_to_order(size_t fd_size, int order)
+{
+	int fd;
+	char *addr;
+	size_t i;
+	const char testfile[] = THP_FS_PATH "/test";
+
+	create_pagecache_thp_and_fd(testfile, fd_size, &fd, &addr);
+
+	printf("truncate %ld kB pagecache page to size %lu kB ... ", fd_size >> 10, 4UL << order);
+	ftruncate(fd, pagesize << order);
+
+	for (i = 0; i < (pagesize << order); i++)
+		if (*(addr + i) != (char)i) {
+			printf("%lu byte corrupted in the file\n", i);
+			exit(EXIT_FAILURE);
+		}
+
+	close(fd);
+	unlink(testfile);
+	printf("done\n");
+}
+
+void punch_hole_in_pagecache_thp(size_t fd_size, off_t offset[], off_t len[], int n)
+{
+	int fd, j;
+	char *addr;
+	size_t i;
+	const char testfile[] = THP_FS_PATH "/test";
+
+	create_pagecache_thp_and_fd(testfile, fd_size, &fd, &addr);
+
+	for (j = 0; j < n; j++) {
+		printf("addr: %lx, punch a hole at offset %ld kB with len %ld kB ... ",
+			(unsigned long)addr, offset[j] >> 10, len[j] >> 10);
+		fallocate(fd, FALLOC_FL_PUNCH_HOLE|FALLOC_FL_KEEP_SIZE, offset[j], len[j]);
+		printf("done\n");
+	}
+
+	for (i = 0; i < fd_size; i++) {
+		int in_hole = 0;
+
+		for (j = 0; j < n; j++)
+			if (i >= offset[j] && i <= (offset[j] + len[j])) {
+				in_hole = 1;
+				break;
+			}
+
+		if (in_hole) {
+			if (*(addr + i)) {
+				printf("%lu byte non-zero after punch\n", i);
+				exit(EXIT_FAILURE);
+			}
+			continue;
+		}
+		if (*(addr + i) != (char)i) {
+			printf("%lu byte corrupted in the file\n", i);
+			exit(EXIT_FAILURE);
+		}
+	}
+
+	close(fd);
+	unlink(testfile);
+}
+
 int main(int argc, char **argv)
 {
+	int i;
+	size_t fd_size;
+	off_t offset[2], len[2];
+
 	if (geteuid() != 0) {
 		printf("Please run the benchmark as root\n");
 		exit(EXIT_FAILURE);
 	}
 
+	setbuf(stdout, NULL);
+
 	pagesize = getpagesize();
 	pageshift = ffs(pagesize) - 1;
 	pmd_pagesize = read_pmd_pagesize();
+	fd_size = 2 * pmd_pagesize;
 
 	split_pmd_thp();
 	split_pte_mapped_thp();
 	split_file_backed_thp();
 
+	for (i = 8; i >= 0; i--)
+		if (i != 1)
+			split_thp_in_pagecache_to_order(fd_size, i);
+
+	/*
+	 * for i is 1, truncate code in the kernel should create order-0 pages
+	 * instead of order-1 THPs, since order-1 THP is not supported. No error
+	 * is expected.
+	 */
+	for (i = 8; i >= 0; i--)
+		truncate_thp_in_pagecache_to_order(fd_size, i);
+
+	offset[0] = 123 * pagesize;
+	offset[1] = 4 * pagesize;
+	len[0] = 200 * pagesize;
+	len[1] = 16 * pagesize;
+	punch_hole_in_pagecache_thp(fd_size, offset, len, 2);
+
+	offset[0] = 259 * pagesize + pagesize / 2;
+	offset[1] = 33 * pagesize;
+	len[0] = 129 * pagesize;
+	len[1] = 16 * pagesize;
+	punch_hole_in_pagecache_thp(fd_size, offset, len, 2);
+
 	return 0;
 }
-- 
2.35.1

[RFC PATCH 5/5] mm: huge_memory: enable debugfs to split huge pages to any order.

[Zi Yan]

From: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

It is used to test split_huge_page_to_list_to_order for pagecache THPs.
Also add test cases for split_huge_page_to_list_to_order via both
debugfs, truncating a file, and punching holes in a file.

Signed-off-by: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 mm/huge_memory.c                              |  26 ++-
 .../selftests/vm/split_huge_page_test.c       | 219 +++++++++++++++---
 2 files changed, 201 insertions(+), 44 deletions(-)

diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 76db0092a1e2..7645bb12fcbc 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2856,7 +2856,7 @@ static inline bool vma_not_suitable_for_thp_split(struct vm_area_struct *vma)
 }
 
 static int split_huge_pages_pid(int pid, unsigned long vaddr_start,
-				unsigned long vaddr_end)
+				unsigned long vaddr_end, unsigned int new_order)
 {
 	int ret = 0;
 	struct task_struct *task;
@@ -2926,7 +2926,7 @@ static int split_huge_pages_pid(int pid, unsigned long vaddr_start,
 		if (!trylock_page(page))
 			goto next;
 
-		if (!split_huge_page(page))
+		if (!split_huge_page_to_list_to_order(page, NULL, new_order))
 			split++;
 
 		unlock_page(page);
@@ -2944,7 +2944,7 @@ static int split_huge_pages_pid(int pid, unsigned long vaddr_start,
 }
 
 static int split_huge_pages_in_file(const char *file_path, pgoff_t off_start,
-				pgoff_t off_end)
+				pgoff_t off_end, unsigned int new_order)
 {
 	struct filename *file;
 	struct file *candidate;
@@ -2984,7 +2984,7 @@ static int split_huge_pages_in_file(const char *file_path, pgoff_t off_start,
 		if (!trylock_page(fpage))
 			goto next;
 
-		if (!split_huge_page(fpage))
+		if (!split_huge_page_to_list_to_order(fpage, NULL, new_order))
 			split++;
 
 		unlock_page(fpage);
@@ -3009,10 +3009,14 @@ static ssize_t split_huge_pages_write(struct file *file, const char __user *buf,
 {
 	static DEFINE_MUTEX(split_debug_mutex);
 	ssize_t ret;
-	/* hold pid, start_vaddr, end_vaddr or file_path, off_start, off_end */
+	/*
+	 * hold pid, start_vaddr, end_vaddr, new_order or
+	 * file_path, off_start, off_end, new_order
+	 */
 	char input_buf[MAX_INPUT_BUF_SZ];
 	int pid;
 	unsigned long vaddr_start, vaddr_end;
+	unsigned int new_order = 0;
 
 	ret = mutex_lock_interruptible(&split_debug_mutex);
 	if (ret)
@@ -3041,29 +3045,29 @@ static ssize_t split_huge_pages_write(struct file *file, const char __user *buf,
 			goto out;
 		}
 
-		ret = sscanf(buf, "0x%lx,0x%lx", &off_start, &off_end);
-		if (ret != 2) {
+		ret = sscanf(buf, "0x%lx,0x%lx,%d", &off_start, &off_end, &new_order);
+		if (ret != 2 && ret != 3) {
 			ret = -EINVAL;
 			goto out;
 		}
-		ret = split_huge_pages_in_file(file_path, off_start, off_end);
+		ret = split_huge_pages_in_file(file_path, off_start, off_end, new_order);
 		if (!ret)
 			ret = input_len;
 
 		goto out;
 	}
 
-	ret = sscanf(input_buf, "%d,0x%lx,0x%lx", &pid, &vaddr_start, &vaddr_end);
+	ret = sscanf(input_buf, "%d,0x%lx,0x%lx,%d", &pid, &vaddr_start, &vaddr_end, &new_order);
 	if (ret == 1 && pid == 1) {
 		split_huge_pages_all();
 		ret = strlen(input_buf);
 		goto out;
-	} else if (ret != 3) {
+	} else if (ret != 3 && ret != 4) {
 		ret = -EINVAL;
 		goto out;
 	}
 
-	ret = split_huge_pages_pid(pid, vaddr_start, vaddr_end);
+	ret = split_huge_pages_pid(pid, vaddr_start, vaddr_end, new_order);
 	if (!ret)
 		ret = strlen(input_buf);
 out:
diff --git a/tools/testing/selftests/vm/split_huge_page_test.c b/tools/testing/selftests/vm/split_huge_page_test.c
index 52497b7b9f1d..af01e7dca9c8 100644
--- a/tools/testing/selftests/vm/split_huge_page_test.c
+++ b/tools/testing/selftests/vm/split_huge_page_test.c
@@ -16,6 +16,7 @@
 #include <sys/mount.h>
 #include <malloc.h>
 #include <stdbool.h>
+#include <time.h>
 
 uint64_t pagesize;
 unsigned int pageshift;
@@ -24,10 +25,11 @@ uint64_t pmd_pagesize;
 #define PMD_SIZE_PATH "/sys/kernel/mm/transparent_hugepage/hpage_pmd_size"
 #define SPLIT_DEBUGFS "/sys/kernel/debug/split_huge_pages"
 #define SMAP_PATH "/proc/self/smaps"
+#define THP_FS_PATH "/mnt/thp_fs"
 #define INPUT_MAX 80
 
-#define PID_FMT "%d,0x%lx,0x%lx"
-#define PATH_FMT "%s,0x%lx,0x%lx"
+#define PID_FMT "%d,0x%lx,0x%lx,%d"
+#define PATH_FMT "%s,0x%lx,0x%lx,%d"
 
 #define PFN_MASK     ((1UL<<55)-1)
 #define KPF_THP      (1UL<<22)
@@ -75,23 +77,6 @@ static uint64_t read_pmd_pagesize(void)
 	return strtoul(buf, NULL, 10);
 }
 
-static int write_file(const char *path, const char *buf, size_t buflen)
-{
-	int fd;
-	ssize_t numwritten;
-
-	fd = open(path, O_WRONLY);
-	if (fd == -1)
-		return 0;
-
-	numwritten = write(fd, buf, buflen - 1);
-	close(fd);
-	if (numwritten < 1)
-		return 0;
-
-	return (unsigned int) numwritten;
-}
-
 static void write_debugfs(const char *fmt, ...)
 {
 	char input[INPUT_MAX];
@@ -106,11 +91,6 @@ static void write_debugfs(const char *fmt, ...)
 		printf("%s: Debugfs input is too long\n", __func__);
 		exit(EXIT_FAILURE);
 	}
-
-	if (!write_file(SPLIT_DEBUGFS, input, ret + 1)) {
-		perror(SPLIT_DEBUGFS);
-		exit(EXIT_FAILURE);
-	}
 }
 
 #define MAX_LINE_LENGTH 500
@@ -124,7 +104,7 @@ static bool check_for_pattern(FILE *fp, const char *pattern, char *buf)
 	return false;
 }
 
-static uint64_t check_huge(void *addr)
+static uint64_t check_huge(void *addr, const char *prefix)
 {
 	uint64_t thp = 0;
 	int ret;
@@ -149,13 +129,13 @@ static uint64_t check_huge(void *addr)
 		goto err_out;
 
 	/*
-	 * Fetch the AnonHugePages: in the same block and check the number of
+	 * Fetch the @prefix in the same block and check the number of
 	 * hugepages.
 	 */
-	if (!check_for_pattern(fp, "AnonHugePages:", buffer))
+	if (!check_for_pattern(fp, prefix, buffer))
 		goto err_out;
 
-	if (sscanf(buffer, "AnonHugePages:%10ld kB", &thp) != 1) {
+	if (sscanf(&buffer[strlen(prefix)], "%10ld kB", &thp) != 1) {
 		printf("Reading smap error\n");
 		exit(EXIT_FAILURE);
 	}
@@ -184,7 +164,7 @@ void split_pmd_thp(void)
 	for (i = 0; i < len; i++)
 		one_page[i] = (char)i;
 
-	thp_size = check_huge(one_page);
+	thp_size = check_huge(one_page, "AnonHugePages:");
 	if (!thp_size) {
 		printf("No THP is allocated\n");
 		exit(EXIT_FAILURE);
@@ -192,7 +172,7 @@ void split_pmd_thp(void)
 
 	/* split all THPs */
 	write_debugfs(PID_FMT, getpid(), (uint64_t)one_page,
-		(uint64_t)one_page + len);
+		(uint64_t)one_page + len, 0);
 
 	for (i = 0; i < len; i++)
 		if (one_page[i] != (char)i) {
@@ -201,7 +181,7 @@ void split_pmd_thp(void)
 		}
 
 
-	thp_size = check_huge(one_page);
+	thp_size = check_huge(one_page, "AnonHugePages:");
 	if (thp_size) {
 		printf("Still %ld kB AnonHugePages not split\n", thp_size);
 		exit(EXIT_FAILURE);
@@ -249,7 +229,7 @@ void split_pte_mapped_thp(void)
 	for (i = 0; i < len; i++)
 		one_page[i] = (char)i;
 
-	thp_size = check_huge(one_page);
+	thp_size = check_huge(one_page, "AnonHugePages:");
 	if (!thp_size) {
 		printf("No THP is allocated\n");
 		exit(EXIT_FAILURE);
@@ -284,7 +264,7 @@ void split_pte_mapped_thp(void)
 
 	/* split all remapped THPs */
 	write_debugfs(PID_FMT, getpid(), (uint64_t)pte_mapped,
-		      (uint64_t)pte_mapped + pagesize * 4);
+		      (uint64_t)pte_mapped + pagesize * 4, 0);
 
 	/* smap does not show THPs after mremap, use kpageflags instead */
 	thp_size = 0;
@@ -371,20 +351,193 @@ void split_file_backed_thp(void)
 	printf("file-backed THP split test done, please check dmesg for more information\n");
 }
 
+void create_pagecache_thp_and_fd(const char *testfile, size_t fd_size, int *fd, char **addr)
+{
+	size_t i;
+	int dummy;
+
+	srand(time(NULL));
+
+	*fd = open(testfile, O_CREAT | O_RDWR, 0664);
+	if (*fd == -1) {
+		perror("Failed to create a file at "THP_FS_PATH);
+		exit(EXIT_FAILURE);
+	}
+
+	for (i = 0; i < fd_size; i++) {
+		unsigned char byte = (unsigned char)i;
+
+		write(*fd, &byte, sizeof(byte));
+	}
+	close(*fd);
+	sync();
+	*fd = open("/proc/sys/vm/drop_caches", O_WRONLY);
+	if (*fd == -1) {
+		perror("open drop_caches");
+		exit(EXIT_FAILURE);
+	}
+	if (write(*fd, "3", 1) != 1) {
+		perror("write to drop_caches");
+		exit(EXIT_FAILURE);
+	}
+	close(*fd);
+
+	*fd = open(testfile, O_RDWR);
+	if (*fd == -1) {
+		perror("Failed to open a file at "THP_FS_PATH);
+		exit(EXIT_FAILURE);
+	}
+
+	*addr = mmap(NULL, fd_size, PROT_READ|PROT_WRITE, MAP_SHARED, *fd, 0);
+	if (*addr == (char *)-1) {
+		perror("cannot mmap");
+		exit(1);
+	}
+	madvise(*addr, fd_size, MADV_HUGEPAGE);
+
+	for (size_t i = 0; i < fd_size; i++)
+		dummy += *(*addr + i);
+
+	if (!check_huge(*addr, "FilePmdMapped:")) {
+		printf("No pagecache THP generated, please mount a filesystem "
+			"supporting pagecache THP at "THP_FS_PATH"\n");
+		exit(EXIT_FAILURE);
+	}
+}
+
+void split_thp_in_pagecache_to_order(size_t fd_size, int order)
+{
+	int fd;
+	char *addr;
+	size_t i;
+	const char testfile[] = THP_FS_PATH "/test";
+
+	create_pagecache_thp_and_fd(testfile, fd_size, &fd, &addr);
+
+	printf("split %ld kB pagecache page to order %d ... ", fd_size >> 10, order);
+	write_debugfs(PID_FMT, getpid(), (uint64_t)addr, (uint64_t)addr + fd_size, order);
+
+	for (i = 0; i < fd_size; i++)
+		if (*(addr + i) != (char)i) {
+			printf("%lu byte corrupted in the file\n", i);
+			exit(EXIT_FAILURE);
+		}
+
+	close(fd);
+	unlink(testfile);
+	printf("done\n");
+}
+
+void truncate_thp_in_pagecache_to_order(size_t fd_size, int order)
+{
+	int fd;
+	char *addr;
+	size_t i;
+	const char testfile[] = THP_FS_PATH "/test";
+
+	create_pagecache_thp_and_fd(testfile, fd_size, &fd, &addr);
+
+	printf("truncate %ld kB pagecache page to size %lu kB ... ", fd_size >> 10, 4UL << order);
+	ftruncate(fd, pagesize << order);
+
+	for (i = 0; i < (pagesize << order); i++)
+		if (*(addr + i) != (char)i) {
+			printf("%lu byte corrupted in the file\n", i);
+			exit(EXIT_FAILURE);
+		}
+
+	close(fd);
+	unlink(testfile);
+	printf("done\n");
+}
+
+void punch_hole_in_pagecache_thp(size_t fd_size, off_t offset[], off_t len[], int n)
+{
+	int fd, j;
+	char *addr;
+	size_t i;
+	const char testfile[] = THP_FS_PATH "/test";
+
+	create_pagecache_thp_and_fd(testfile, fd_size, &fd, &addr);
+
+	for (j = 0; j < n; j++) {
+		printf("addr: %lx, punch a hole at offset %ld kB with len %ld kB ... ",
+			(unsigned long)addr, offset[j] >> 10, len[j] >> 10);
+		fallocate(fd, FALLOC_FL_PUNCH_HOLE|FALLOC_FL_KEEP_SIZE, offset[j], len[j]);
+		printf("done\n");
+	}
+
+	for (i = 0; i < fd_size; i++) {
+		int in_hole = 0;
+
+		for (j = 0; j < n; j++)
+			if (i >= offset[j] && i <= (offset[j] + len[j])) {
+				in_hole = 1;
+				break;
+			}
+
+		if (in_hole) {
+			if (*(addr + i)) {
+				printf("%lu byte non-zero after punch\n", i);
+				exit(EXIT_FAILURE);
+			}
+			continue;
+		}
+		if (*(addr + i) != (char)i) {
+			printf("%lu byte corrupted in the file\n", i);
+			exit(EXIT_FAILURE);
+		}
+	}
+
+	close(fd);
+	unlink(testfile);
+}
+
 int main(int argc, char **argv)
 {
+	int i;
+	size_t fd_size;
+	off_t offset[2], len[2];
+
 	if (geteuid() != 0) {
 		printf("Please run the benchmark as root\n");
 		exit(EXIT_FAILURE);
 	}
 
+	setbuf(stdout, NULL);
+
 	pagesize = getpagesize();
 	pageshift = ffs(pagesize) - 1;
 	pmd_pagesize = read_pmd_pagesize();
+	fd_size = 2 * pmd_pagesize;
 
 	split_pmd_thp();
 	split_pte_mapped_thp();
 	split_file_backed_thp();
 
+	for (i = 8; i >= 0; i--)
+		if (i != 1)
+			split_thp_in_pagecache_to_order(fd_size, i);
+
+	/*
+	 * for i is 1, truncate code in the kernel should create order-0 pages
+	 * instead of order-1 THPs, since order-1 THP is not supported. No error
+	 * is expected.
+	 */
+	for (i = 8; i >= 0; i--)
+		truncate_thp_in_pagecache_to_order(fd_size, i);
+
+	offset[0] = 123 * pagesize;
+	offset[1] = 4 * pagesize;
+	len[0] = 200 * pagesize;
+	len[1] = 16 * pagesize;
+	punch_hole_in_pagecache_thp(fd_size, offset, len, 2);
+
+	offset[0] = 259 * pagesize + pagesize / 2;
+	offset[1] = 33 * pagesize;
+	len[0] = 129 * pagesize;
+	len[1] = 16 * pagesize;
+	punch_hole_in_pagecache_thp(fd_size, offset, len, 2);
+
 	return 0;
 }
-- 
2.35.1

Re: [RFC PATCH 5/5] mm: huge_memory: enable debugfs to split huge pages to any order.

[Roman Gushchin]

On Mon, Mar 21, 2022 at 10:21:28AM -0400, Zi Yan wrote:
> From: Zi Yan <ziy@nvidia.com>
> 
> It is used to test split_huge_page_to_list_to_order for pagecache THPs.
> Also add test cases for split_huge_page_to_list_to_order via both
> debugfs, truncating a file, and punching holes in a file.
> 
> Signed-off-by: Zi Yan <ziy@nvidia.com>

Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>

Thanks!

> ---
>  mm/huge_memory.c                              |  26 ++-
>  .../selftests/vm/split_huge_page_test.c       | 219 +++++++++++++++---
>  2 files changed, 201 insertions(+), 44 deletions(-)
> 
> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> index 76db0092a1e2..7645bb12fcbc 100644
> --- a/mm/huge_memory.c
> +++ b/mm/huge_memory.c
> @@ -2856,7 +2856,7 @@ static inline bool vma_not_suitable_for_thp_split(struct vm_area_struct *vma)
>  }
>  
>  static int split_huge_pages_pid(int pid, unsigned long vaddr_start,
> -				unsigned long vaddr_end)
> +				unsigned long vaddr_end, unsigned int new_order)
>  {
>  	int ret = 0;
>  	struct task_struct *task;
> @@ -2926,7 +2926,7 @@ static int split_huge_pages_pid(int pid, unsigned long vaddr_start,
>  		if (!trylock_page(page))
>  			goto next;
>  
> -		if (!split_huge_page(page))
> +		if (!split_huge_page_to_list_to_order(page, NULL, new_order))
>  			split++;
>  
>  		unlock_page(page);
> @@ -2944,7 +2944,7 @@ static int split_huge_pages_pid(int pid, unsigned long vaddr_start,
>  }
>  
>  static int split_huge_pages_in_file(const char *file_path, pgoff_t off_start,
> -				pgoff_t off_end)
> +				pgoff_t off_end, unsigned int new_order)
>  {
>  	struct filename *file;
>  	struct file *candidate;
> @@ -2984,7 +2984,7 @@ static int split_huge_pages_in_file(const char *file_path, pgoff_t off_start,
>  		if (!trylock_page(fpage))
>  			goto next;
>  
> -		if (!split_huge_page(fpage))
> +		if (!split_huge_page_to_list_to_order(fpage, NULL, new_order))
>  			split++;
>  
>  		unlock_page(fpage);
> @@ -3009,10 +3009,14 @@ static ssize_t split_huge_pages_write(struct file *file, const char __user *buf,
>  {
>  	static DEFINE_MUTEX(split_debug_mutex);
>  	ssize_t ret;
> -	/* hold pid, start_vaddr, end_vaddr or file_path, off_start, off_end */
> +	/*
> +	 * hold pid, start_vaddr, end_vaddr, new_order or
> +	 * file_path, off_start, off_end, new_order
> +	 */
>  	char input_buf[MAX_INPUT_BUF_SZ];
>  	int pid;
>  	unsigned long vaddr_start, vaddr_end;
> +	unsigned int new_order = 0;
>  
>  	ret = mutex_lock_interruptible(&split_debug_mutex);
>  	if (ret)
> @@ -3041,29 +3045,29 @@ static ssize_t split_huge_pages_write(struct file *file, const char __user *buf,
>  			goto out;
>  		}
>  
> -		ret = sscanf(buf, "0x%lx,0x%lx", &off_start, &off_end);
> -		if (ret != 2) {
> +		ret = sscanf(buf, "0x%lx,0x%lx,%d", &off_start, &off_end, &new_order);
> +		if (ret != 2 && ret != 3) {
>  			ret = -EINVAL;
>  			goto out;
>  		}
> -		ret = split_huge_pages_in_file(file_path, off_start, off_end);
> +		ret = split_huge_pages_in_file(file_path, off_start, off_end, new_order);
>  		if (!ret)
>  			ret = input_len;
>  
>  		goto out;
>  	}
>  
> -	ret = sscanf(input_buf, "%d,0x%lx,0x%lx", &pid, &vaddr_start, &vaddr_end);
> +	ret = sscanf(input_buf, "%d,0x%lx,0x%lx,%d", &pid, &vaddr_start, &vaddr_end, &new_order);
>  	if (ret == 1 && pid == 1) {
>  		split_huge_pages_all();
>  		ret = strlen(input_buf);
>  		goto out;
> -	} else if (ret != 3) {
> +	} else if (ret != 3 && ret != 4) {
>  		ret = -EINVAL;
>  		goto out;
>  	}
>  
> -	ret = split_huge_pages_pid(pid, vaddr_start, vaddr_end);
> +	ret = split_huge_pages_pid(pid, vaddr_start, vaddr_end, new_order);
>  	if (!ret)
>  		ret = strlen(input_buf);
>  out:
> diff --git a/tools/testing/selftests/vm/split_huge_page_test.c b/tools/testing/selftests/vm/split_huge_page_test.c
> index 52497b7b9f1d..af01e7dca9c8 100644
> --- a/tools/testing/selftests/vm/split_huge_page_test.c
> +++ b/tools/testing/selftests/vm/split_huge_page_test.c
> @@ -16,6 +16,7 @@
>  #include <sys/mount.h>
>  #include <malloc.h>
>  #include <stdbool.h>
> +#include <time.h>
>  
>  uint64_t pagesize;
>  unsigned int pageshift;
> @@ -24,10 +25,11 @@ uint64_t pmd_pagesize;
>  #define PMD_SIZE_PATH "/sys/kernel/mm/transparent_hugepage/hpage_pmd_size"
>  #define SPLIT_DEBUGFS "/sys/kernel/debug/split_huge_pages"
>  #define SMAP_PATH "/proc/self/smaps"
> +#define THP_FS_PATH "/mnt/thp_fs"
>  #define INPUT_MAX 80
>  
> -#define PID_FMT "%d,0x%lx,0x%lx"
> -#define PATH_FMT "%s,0x%lx,0x%lx"
> +#define PID_FMT "%d,0x%lx,0x%lx,%d"
> +#define PATH_FMT "%s,0x%lx,0x%lx,%d"
>  
>  #define PFN_MASK     ((1UL<<55)-1)
>  #define KPF_THP      (1UL<<22)
> @@ -75,23 +77,6 @@ static uint64_t read_pmd_pagesize(void)
>  	return strtoul(buf, NULL, 10);
>  }
>  
> -static int write_file(const char *path, const char *buf, size_t buflen)
> -{
> -	int fd;
> -	ssize_t numwritten;
> -
> -	fd = open(path, O_WRONLY);
> -	if (fd == -1)
> -		return 0;
> -
> -	numwritten = write(fd, buf, buflen - 1);
> -	close(fd);
> -	if (numwritten < 1)
> -		return 0;
> -
> -	return (unsigned int) numwritten;
> -}
> -
>  static void write_debugfs(const char *fmt, ...)
>  {
>  	char input[INPUT_MAX];
> @@ -106,11 +91,6 @@ static void write_debugfs(const char *fmt, ...)
>  		printf("%s: Debugfs input is too long\n", __func__);
>  		exit(EXIT_FAILURE);
>  	}
> -
> -	if (!write_file(SPLIT_DEBUGFS, input, ret + 1)) {
> -		perror(SPLIT_DEBUGFS);
> -		exit(EXIT_FAILURE);
> -	}
>  }
>  
>  #define MAX_LINE_LENGTH 500
> @@ -124,7 +104,7 @@ static bool check_for_pattern(FILE *fp, const char *pattern, char *buf)
>  	return false;
>  }
>  
> -static uint64_t check_huge(void *addr)
> +static uint64_t check_huge(void *addr, const char *prefix)
>  {
>  	uint64_t thp = 0;
>  	int ret;
> @@ -149,13 +129,13 @@ static uint64_t check_huge(void *addr)
>  		goto err_out;
>  
>  	/*
> -	 * Fetch the AnonHugePages: in the same block and check the number of
> +	 * Fetch the @prefix in the same block and check the number of
>  	 * hugepages.
>  	 */
> -	if (!check_for_pattern(fp, "AnonHugePages:", buffer))
> +	if (!check_for_pattern(fp, prefix, buffer))
>  		goto err_out;
>  
> -	if (sscanf(buffer, "AnonHugePages:%10ld kB", &thp) != 1) {
> +	if (sscanf(&buffer[strlen(prefix)], "%10ld kB", &thp) != 1) {
>  		printf("Reading smap error\n");
>  		exit(EXIT_FAILURE);
>  	}
> @@ -184,7 +164,7 @@ void split_pmd_thp(void)
>  	for (i = 0; i < len; i++)
>  		one_page[i] = (char)i;
>  
> -	thp_size = check_huge(one_page);
> +	thp_size = check_huge(one_page, "AnonHugePages:");
>  	if (!thp_size) {
>  		printf("No THP is allocated\n");
>  		exit(EXIT_FAILURE);
> @@ -192,7 +172,7 @@ void split_pmd_thp(void)
>  
>  	/* split all THPs */
>  	write_debugfs(PID_FMT, getpid(), (uint64_t)one_page,
> -		(uint64_t)one_page + len);
> +		(uint64_t)one_page + len, 0);
>  
>  	for (i = 0; i < len; i++)
>  		if (one_page[i] != (char)i) {
> @@ -201,7 +181,7 @@ void split_pmd_thp(void)
>  		}
>  
>  
> -	thp_size = check_huge(one_page);
> +	thp_size = check_huge(one_page, "AnonHugePages:");
>  	if (thp_size) {
>  		printf("Still %ld kB AnonHugePages not split\n", thp_size);
>  		exit(EXIT_FAILURE);
> @@ -249,7 +229,7 @@ void split_pte_mapped_thp(void)
>  	for (i = 0; i < len; i++)
>  		one_page[i] = (char)i;
>  
> -	thp_size = check_huge(one_page);
> +	thp_size = check_huge(one_page, "AnonHugePages:");
>  	if (!thp_size) {
>  		printf("No THP is allocated\n");
>  		exit(EXIT_FAILURE);
> @@ -284,7 +264,7 @@ void split_pte_mapped_thp(void)
>  
>  	/* split all remapped THPs */
>  	write_debugfs(PID_FMT, getpid(), (uint64_t)pte_mapped,
> -		      (uint64_t)pte_mapped + pagesize * 4);
> +		      (uint64_t)pte_mapped + pagesize * 4, 0);
>  
>  	/* smap does not show THPs after mremap, use kpageflags instead */
>  	thp_size = 0;
> @@ -371,20 +351,193 @@ void split_file_backed_thp(void)
>  	printf("file-backed THP split test done, please check dmesg for more information\n");
>  }
>  
> +void create_pagecache_thp_and_fd(const char *testfile, size_t fd_size, int *fd, char **addr)
> +{
> +	size_t i;
> +	int dummy;
> +
> +	srand(time(NULL));
> +
> +	*fd = open(testfile, O_CREAT | O_RDWR, 0664);
> +	if (*fd == -1) {
> +		perror("Failed to create a file at "THP_FS_PATH);
> +		exit(EXIT_FAILURE);
> +	}
> +
> +	for (i = 0; i < fd_size; i++) {
> +		unsigned char byte = (unsigned char)i;
> +
> +		write(*fd, &byte, sizeof(byte));
> +	}
> +	close(*fd);
> +	sync();
> +	*fd = open("/proc/sys/vm/drop_caches", O_WRONLY);
> +	if (*fd == -1) {
> +		perror("open drop_caches");
> +		exit(EXIT_FAILURE);
> +	}
> +	if (write(*fd, "3", 1) != 1) {
> +		perror("write to drop_caches");
> +		exit(EXIT_FAILURE);
> +	}
> +	close(*fd);
> +
> +	*fd = open(testfile, O_RDWR);
> +	if (*fd == -1) {
> +		perror("Failed to open a file at "THP_FS_PATH);
> +		exit(EXIT_FAILURE);
> +	}
> +
> +	*addr = mmap(NULL, fd_size, PROT_READ|PROT_WRITE, MAP_SHARED, *fd, 0);
> +	if (*addr == (char *)-1) {
> +		perror("cannot mmap");
> +		exit(1);
> +	}
> +	madvise(*addr, fd_size, MADV_HUGEPAGE);
> +
> +	for (size_t i = 0; i < fd_size; i++)
> +		dummy += *(*addr + i);
> +
> +	if (!check_huge(*addr, "FilePmdMapped:")) {
> +		printf("No pagecache THP generated, please mount a filesystem "
> +			"supporting pagecache THP at "THP_FS_PATH"\n");
> +		exit(EXIT_FAILURE);
> +	}
> +}
> +
> +void split_thp_in_pagecache_to_order(size_t fd_size, int order)
> +{
> +	int fd;
> +	char *addr;
> +	size_t i;
> +	const char testfile[] = THP_FS_PATH "/test";
> +
> +	create_pagecache_thp_and_fd(testfile, fd_size, &fd, &addr);
> +
> +	printf("split %ld kB pagecache page to order %d ... ", fd_size >> 10, order);
> +	write_debugfs(PID_FMT, getpid(), (uint64_t)addr, (uint64_t)addr + fd_size, order);
> +
> +	for (i = 0; i < fd_size; i++)
> +		if (*(addr + i) != (char)i) {
> +			printf("%lu byte corrupted in the file\n", i);
> +			exit(EXIT_FAILURE);
> +		}
> +
> +	close(fd);
> +	unlink(testfile);
> +	printf("done\n");
> +}
> +
> +void truncate_thp_in_pagecache_to_order(size_t fd_size, int order)
> +{
> +	int fd;
> +	char *addr;
> +	size_t i;
> +	const char testfile[] = THP_FS_PATH "/test";
> +
> +	create_pagecache_thp_and_fd(testfile, fd_size, &fd, &addr);
> +
> +	printf("truncate %ld kB pagecache page to size %lu kB ... ", fd_size >> 10, 4UL << order);
> +	ftruncate(fd, pagesize << order);
> +
> +	for (i = 0; i < (pagesize << order); i++)
> +		if (*(addr + i) != (char)i) {
> +			printf("%lu byte corrupted in the file\n", i);
> +			exit(EXIT_FAILURE);
> +		}
> +
> +	close(fd);
> +	unlink(testfile);
> +	printf("done\n");
> +}
> +
> +void punch_hole_in_pagecache_thp(size_t fd_size, off_t offset[], off_t len[], int n)
> +{
> +	int fd, j;
> +	char *addr;
> +	size_t i;
> +	const char testfile[] = THP_FS_PATH "/test";
> +
> +	create_pagecache_thp_and_fd(testfile, fd_size, &fd, &addr);
> +
> +	for (j = 0; j < n; j++) {
> +		printf("addr: %lx, punch a hole at offset %ld kB with len %ld kB ... ",
> +			(unsigned long)addr, offset[j] >> 10, len[j] >> 10);
> +		fallocate(fd, FALLOC_FL_PUNCH_HOLE|FALLOC_FL_KEEP_SIZE, offset[j], len[j]);
> +		printf("done\n");
> +	}
> +
> +	for (i = 0; i < fd_size; i++) {
> +		int in_hole = 0;
> +
> +		for (j = 0; j < n; j++)
> +			if (i >= offset[j] && i <= (offset[j] + len[j])) {
> +				in_hole = 1;
> +				break;
> +			}
> +
> +		if (in_hole) {
> +			if (*(addr + i)) {
> +				printf("%lu byte non-zero after punch\n", i);
> +				exit(EXIT_FAILURE);
> +			}
> +			continue;
> +		}
> +		if (*(addr + i) != (char)i) {
> +			printf("%lu byte corrupted in the file\n", i);
> +			exit(EXIT_FAILURE);
> +		}
> +	}
> +
> +	close(fd);
> +	unlink(testfile);
> +}
> +
>  int main(int argc, char **argv)
>  {
> +	int i;
> +	size_t fd_size;
> +	off_t offset[2], len[2];
> +
>  	if (geteuid() != 0) {
>  		printf("Please run the benchmark as root\n");
>  		exit(EXIT_FAILURE);
>  	}
>  
> +	setbuf(stdout, NULL);
> +
>  	pagesize = getpagesize();
>  	pageshift = ffs(pagesize) - 1;
>  	pmd_pagesize = read_pmd_pagesize();
> +	fd_size = 2 * pmd_pagesize;
>  
>  	split_pmd_thp();
>  	split_pte_mapped_thp();
>  	split_file_backed_thp();
>  
> +	for (i = 8; i >= 0; i--)
> +		if (i != 1)
> +			split_thp_in_pagecache_to_order(fd_size, i);
> +
> +	/*
> +	 * for i is 1, truncate code in the kernel should create order-0 pages
> +	 * instead of order-1 THPs, since order-1 THP is not supported. No error
> +	 * is expected.
> +	 */
> +	for (i = 8; i >= 0; i--)
> +		truncate_thp_in_pagecache_to_order(fd_size, i);
> +
> +	offset[0] = 123 * pagesize;
> +	offset[1] = 4 * pagesize;
> +	len[0] = 200 * pagesize;
> +	len[1] = 16 * pagesize;
> +	punch_hole_in_pagecache_thp(fd_size, offset, len, 2);
> +
> +	offset[0] = 259 * pagesize + pagesize / 2;
> +	offset[1] = 33 * pagesize;
> +	len[0] = 129 * pagesize;
> +	len[1] = 16 * pagesize;
> +	punch_hole_in_pagecache_thp(fd_size, offset, len, 2);
> +
>  	return 0;
>  }
> -- 
> 2.35.1
> 

Re: [RFC PATCH 5/5] mm: huge_memory: enable debugfs to split huge pages to any order.

[Roman Gushchin]

On Mon, Mar 21, 2022 at 10:21:28AM -0400, Zi Yan wrote:
> From: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> 
> It is used to test split_huge_page_to_list_to_order for pagecache THPs.
> Also add test cases for split_huge_page_to_list_to_order via both
> debugfs, truncating a file, and punching holes in a file.
> 
> Signed-off-by: Zi Yan <ziy-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

Reviewed-by: Roman Gushchin <roman.gushchin-fxUVXftIFDnyG1zEObXtfA@public.gmane.org>

Thanks!

> ---
>  mm/huge_memory.c                              |  26 ++-
>  .../selftests/vm/split_huge_page_test.c       | 219 +++++++++++++++---
>  2 files changed, 201 insertions(+), 44 deletions(-)
> 
> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> index 76db0092a1e2..7645bb12fcbc 100644
> --- a/mm/huge_memory.c
> +++ b/mm/huge_memory.c
> @@ -2856,7 +2856,7 @@ static inline bool vma_not_suitable_for_thp_split(struct vm_area_struct *vma)
>  }
>  
>  static int split_huge_pages_pid(int pid, unsigned long vaddr_start,
> -				unsigned long vaddr_end)
> +				unsigned long vaddr_end, unsigned int new_order)
>  {
>  	int ret = 0;
>  	struct task_struct *task;
> @@ -2926,7 +2926,7 @@ static int split_huge_pages_pid(int pid, unsigned long vaddr_start,
>  		if (!trylock_page(page))
>  			goto next;
>  
> -		if (!split_huge_page(page))
> +		if (!split_huge_page_to_list_to_order(page, NULL, new_order))
>  			split++;
>  
>  		unlock_page(page);
> @@ -2944,7 +2944,7 @@ static int split_huge_pages_pid(int pid, unsigned long vaddr_start,
>  }
>  
>  static int split_huge_pages_in_file(const char *file_path, pgoff_t off_start,
> -				pgoff_t off_end)
> +				pgoff_t off_end, unsigned int new_order)
>  {
>  	struct filename *file;
>  	struct file *candidate;
> @@ -2984,7 +2984,7 @@ static int split_huge_pages_in_file(const char *file_path, pgoff_t off_start,
>  		if (!trylock_page(fpage))
>  			goto next;
>  
> -		if (!split_huge_page(fpage))
> +		if (!split_huge_page_to_list_to_order(fpage, NULL, new_order))
>  			split++;
>  
>  		unlock_page(fpage);
> @@ -3009,10 +3009,14 @@ static ssize_t split_huge_pages_write(struct file *file, const char __user *buf,
>  {
>  	static DEFINE_MUTEX(split_debug_mutex);
>  	ssize_t ret;
> -	/* hold pid, start_vaddr, end_vaddr or file_path, off_start, off_end */
> +	/*
> +	 * hold pid, start_vaddr, end_vaddr, new_order or
> +	 * file_path, off_start, off_end, new_order
> +	 */
>  	char input_buf[MAX_INPUT_BUF_SZ];
>  	int pid;
>  	unsigned long vaddr_start, vaddr_end;
> +	unsigned int new_order = 0;
>  
>  	ret = mutex_lock_interruptible(&split_debug_mutex);
>  	if (ret)
> @@ -3041,29 +3045,29 @@ static ssize_t split_huge_pages_write(struct file *file, const char __user *buf,
>  			goto out;
>  		}
>  
> -		ret = sscanf(buf, "0x%lx,0x%lx", &off_start, &off_end);
> -		if (ret != 2) {
> +		ret = sscanf(buf, "0x%lx,0x%lx,%d", &off_start, &off_end, &new_order);
> +		if (ret != 2 && ret != 3) {
>  			ret = -EINVAL;
>  			goto out;
>  		}
> -		ret = split_huge_pages_in_file(file_path, off_start, off_end);
> +		ret = split_huge_pages_in_file(file_path, off_start, off_end, new_order);
>  		if (!ret)
>  			ret = input_len;
>  
>  		goto out;
>  	}
>  
> -	ret = sscanf(input_buf, "%d,0x%lx,0x%lx", &pid, &vaddr_start, &vaddr_end);
> +	ret = sscanf(input_buf, "%d,0x%lx,0x%lx,%d", &pid, &vaddr_start, &vaddr_end, &new_order);
>  	if (ret == 1 && pid == 1) {
>  		split_huge_pages_all();
>  		ret = strlen(input_buf);
>  		goto out;
> -	} else if (ret != 3) {
> +	} else if (ret != 3 && ret != 4) {
>  		ret = -EINVAL;
>  		goto out;
>  	}
>  
> -	ret = split_huge_pages_pid(pid, vaddr_start, vaddr_end);
> +	ret = split_huge_pages_pid(pid, vaddr_start, vaddr_end, new_order);
>  	if (!ret)
>  		ret = strlen(input_buf);
>  out:
> diff --git a/tools/testing/selftests/vm/split_huge_page_test.c b/tools/testing/selftests/vm/split_huge_page_test.c
> index 52497b7b9f1d..af01e7dca9c8 100644
> --- a/tools/testing/selftests/vm/split_huge_page_test.c
> +++ b/tools/testing/selftests/vm/split_huge_page_test.c
> @@ -16,6 +16,7 @@
>  #include <sys/mount.h>
>  #include <malloc.h>
>  #include <stdbool.h>
> +#include <time.h>
>  
>  uint64_t pagesize;
>  unsigned int pageshift;
> @@ -24,10 +25,11 @@ uint64_t pmd_pagesize;
>  #define PMD_SIZE_PATH "/sys/kernel/mm/transparent_hugepage/hpage_pmd_size"
>  #define SPLIT_DEBUGFS "/sys/kernel/debug/split_huge_pages"
>  #define SMAP_PATH "/proc/self/smaps"
> +#define THP_FS_PATH "/mnt/thp_fs"
>  #define INPUT_MAX 80
>  
> -#define PID_FMT "%d,0x%lx,0x%lx"
> -#define PATH_FMT "%s,0x%lx,0x%lx"
> +#define PID_FMT "%d,0x%lx,0x%lx,%d"
> +#define PATH_FMT "%s,0x%lx,0x%lx,%d"
>  
>  #define PFN_MASK     ((1UL<<55)-1)
>  #define KPF_THP      (1UL<<22)
> @@ -75,23 +77,6 @@ static uint64_t read_pmd_pagesize(void)
>  	return strtoul(buf, NULL, 10);
>  }
>  
> -static int write_file(const char *path, const char *buf, size_t buflen)
> -{
> -	int fd;
> -	ssize_t numwritten;
> -
> -	fd = open(path, O_WRONLY);
> -	if (fd == -1)
> -		return 0;
> -
> -	numwritten = write(fd, buf, buflen - 1);
> -	close(fd);
> -	if (numwritten < 1)
> -		return 0;
> -
> -	return (unsigned int) numwritten;
> -}
> -
>  static void write_debugfs(const char *fmt, ...)
>  {
>  	char input[INPUT_MAX];
> @@ -106,11 +91,6 @@ static void write_debugfs(const char *fmt, ...)
>  		printf("%s: Debugfs input is too long\n", __func__);
>  		exit(EXIT_FAILURE);
>  	}
> -
> -	if (!write_file(SPLIT_DEBUGFS, input, ret + 1)) {
> -		perror(SPLIT_DEBUGFS);
> -		exit(EXIT_FAILURE);
> -	}
>  }
>  
>  #define MAX_LINE_LENGTH 500
> @@ -124,7 +104,7 @@ static bool check_for_pattern(FILE *fp, const char *pattern, char *buf)
>  	return false;
>  }
>  
> -static uint64_t check_huge(void *addr)
> +static uint64_t check_huge(void *addr, const char *prefix)
>  {
>  	uint64_t thp = 0;
>  	int ret;
> @@ -149,13 +129,13 @@ static uint64_t check_huge(void *addr)
>  		goto err_out;
>  
>  	/*
> -	 * Fetch the AnonHugePages: in the same block and check the number of
> +	 * Fetch the @prefix in the same block and check the number of
>  	 * hugepages.
>  	 */
> -	if (!check_for_pattern(fp, "AnonHugePages:", buffer))
> +	if (!check_for_pattern(fp, prefix, buffer))
>  		goto err_out;
>  
> -	if (sscanf(buffer, "AnonHugePages:%10ld kB", &thp) != 1) {
> +	if (sscanf(&buffer[strlen(prefix)], "%10ld kB", &thp) != 1) {
>  		printf("Reading smap error\n");
>  		exit(EXIT_FAILURE);
>  	}
> @@ -184,7 +164,7 @@ void split_pmd_thp(void)
>  	for (i = 0; i < len; i++)
>  		one_page[i] = (char)i;
>  
> -	thp_size = check_huge(one_page);
> +	thp_size = check_huge(one_page, "AnonHugePages:");
>  	if (!thp_size) {
>  		printf("No THP is allocated\n");
>  		exit(EXIT_FAILURE);
> @@ -192,7 +172,7 @@ void split_pmd_thp(void)
>  
>  	/* split all THPs */
>  	write_debugfs(PID_FMT, getpid(), (uint64_t)one_page,
> -		(uint64_t)one_page + len);
> +		(uint64_t)one_page + len, 0);
>  
>  	for (i = 0; i < len; i++)
>  		if (one_page[i] != (char)i) {
> @@ -201,7 +181,7 @@ void split_pmd_thp(void)
>  		}
>  
>  
> -	thp_size = check_huge(one_page);
> +	thp_size = check_huge(one_page, "AnonHugePages:");
>  	if (thp_size) {
>  		printf("Still %ld kB AnonHugePages not split\n", thp_size);
>  		exit(EXIT_FAILURE);
> @@ -249,7 +229,7 @@ void split_pte_mapped_thp(void)
>  	for (i = 0; i < len; i++)
>  		one_page[i] = (char)i;
>  
> -	thp_size = check_huge(one_page);
> +	thp_size = check_huge(one_page, "AnonHugePages:");
>  	if (!thp_size) {
>  		printf("No THP is allocated\n");
>  		exit(EXIT_FAILURE);
> @@ -284,7 +264,7 @@ void split_pte_mapped_thp(void)
>  
>  	/* split all remapped THPs */
>  	write_debugfs(PID_FMT, getpid(), (uint64_t)pte_mapped,
> -		      (uint64_t)pte_mapped + pagesize * 4);
> +		      (uint64_t)pte_mapped + pagesize * 4, 0);
>  
>  	/* smap does not show THPs after mremap, use kpageflags instead */
>  	thp_size = 0;
> @@ -371,20 +351,193 @@ void split_file_backed_thp(void)
>  	printf("file-backed THP split test done, please check dmesg for more information\n");
>  }
>  
> +void create_pagecache_thp_and_fd(const char *testfile, size_t fd_size, int *fd, char **addr)
> +{
> +	size_t i;
> +	int dummy;
> +
> +	srand(time(NULL));
> +
> +	*fd = open(testfile, O_CREAT | O_RDWR, 0664);
> +	if (*fd == -1) {
> +		perror("Failed to create a file at "THP_FS_PATH);
> +		exit(EXIT_FAILURE);
> +	}
> +
> +	for (i = 0; i < fd_size; i++) {
> +		unsigned char byte = (unsigned char)i;
> +
> +		write(*fd, &byte, sizeof(byte));
> +	}
> +	close(*fd);
> +	sync();
> +	*fd = open("/proc/sys/vm/drop_caches", O_WRONLY);
> +	if (*fd == -1) {
> +		perror("open drop_caches");
> +		exit(EXIT_FAILURE);
> +	}
> +	if (write(*fd, "3", 1) != 1) {
> +		perror("write to drop_caches");
> +		exit(EXIT_FAILURE);
> +	}
> +	close(*fd);
> +
> +	*fd = open(testfile, O_RDWR);
> +	if (*fd == -1) {
> +		perror("Failed to open a file at "THP_FS_PATH);
> +		exit(EXIT_FAILURE);
> +	}
> +
> +	*addr = mmap(NULL, fd_size, PROT_READ|PROT_WRITE, MAP_SHARED, *fd, 0);
> +	if (*addr == (char *)-1) {
> +		perror("cannot mmap");
> +		exit(1);
> +	}
> +	madvise(*addr, fd_size, MADV_HUGEPAGE);
> +
> +	for (size_t i = 0; i < fd_size; i++)
> +		dummy += *(*addr + i);
> +
> +	if (!check_huge(*addr, "FilePmdMapped:")) {
> +		printf("No pagecache THP generated, please mount a filesystem "
> +			"supporting pagecache THP at "THP_FS_PATH"\n");
> +		exit(EXIT_FAILURE);
> +	}
> +}
> +
> +void split_thp_in_pagecache_to_order(size_t fd_size, int order)
> +{
> +	int fd;
> +	char *addr;
> +	size_t i;
> +	const char testfile[] = THP_FS_PATH "/test";
> +
> +	create_pagecache_thp_and_fd(testfile, fd_size, &fd, &addr);
> +
> +	printf("split %ld kB pagecache page to order %d ... ", fd_size >> 10, order);
> +	write_debugfs(PID_FMT, getpid(), (uint64_t)addr, (uint64_t)addr + fd_size, order);
> +
> +	for (i = 0; i < fd_size; i++)
> +		if (*(addr + i) != (char)i) {
> +			printf("%lu byte corrupted in the file\n", i);
> +			exit(EXIT_FAILURE);
> +		}
> +
> +	close(fd);
> +	unlink(testfile);
> +	printf("done\n");
> +}
> +
> +void truncate_thp_in_pagecache_to_order(size_t fd_size, int order)
> +{
> +	int fd;
> +	char *addr;
> +	size_t i;
> +	const char testfile[] = THP_FS_PATH "/test";
> +
> +	create_pagecache_thp_and_fd(testfile, fd_size, &fd, &addr);
> +
> +	printf("truncate %ld kB pagecache page to size %lu kB ... ", fd_size >> 10, 4UL << order);
> +	ftruncate(fd, pagesize << order);
> +
> +	for (i = 0; i < (pagesize << order); i++)
> +		if (*(addr + i) != (char)i) {
> +			printf("%lu byte corrupted in the file\n", i);
> +			exit(EXIT_FAILURE);
> +		}
> +
> +	close(fd);
> +	unlink(testfile);
> +	printf("done\n");
> +}
> +
> +void punch_hole_in_pagecache_thp(size_t fd_size, off_t offset[], off_t len[], int n)
> +{
> +	int fd, j;
> +	char *addr;
> +	size_t i;
> +	const char testfile[] = THP_FS_PATH "/test";
> +
> +	create_pagecache_thp_and_fd(testfile, fd_size, &fd, &addr);
> +
> +	for (j = 0; j < n; j++) {
> +		printf("addr: %lx, punch a hole at offset %ld kB with len %ld kB ... ",
> +			(unsigned long)addr, offset[j] >> 10, len[j] >> 10);
> +		fallocate(fd, FALLOC_FL_PUNCH_HOLE|FALLOC_FL_KEEP_SIZE, offset[j], len[j]);
> +		printf("done\n");
> +	}
> +
> +	for (i = 0; i < fd_size; i++) {
> +		int in_hole = 0;
> +
> +		for (j = 0; j < n; j++)
> +			if (i >= offset[j] && i <= (offset[j] + len[j])) {
> +				in_hole = 1;
> +				break;
> +			}
> +
> +		if (in_hole) {
> +			if (*(addr + i)) {
> +				printf("%lu byte non-zero after punch\n", i);
> +				exit(EXIT_FAILURE);
> +			}
> +			continue;
> +		}
> +		if (*(addr + i) != (char)i) {
> +			printf("%lu byte corrupted in the file\n", i);
> +			exit(EXIT_FAILURE);
> +		}
> +	}
> +
> +	close(fd);
> +	unlink(testfile);
> +}
> +
>  int main(int argc, char **argv)
>  {
> +	int i;
> +	size_t fd_size;
> +	off_t offset[2], len[2];
> +
>  	if (geteuid() != 0) {
>  		printf("Please run the benchmark as root\n");
>  		exit(EXIT_FAILURE);
>  	}
>  
> +	setbuf(stdout, NULL);
> +
>  	pagesize = getpagesize();
>  	pageshift = ffs(pagesize) - 1;
>  	pmd_pagesize = read_pmd_pagesize();
> +	fd_size = 2 * pmd_pagesize;
>  
>  	split_pmd_thp();
>  	split_pte_mapped_thp();
>  	split_file_backed_thp();
>  
> +	for (i = 8; i >= 0; i--)
> +		if (i != 1)
> +			split_thp_in_pagecache_to_order(fd_size, i);
> +
> +	/*
> +	 * for i is 1, truncate code in the kernel should create order-0 pages
> +	 * instead of order-1 THPs, since order-1 THP is not supported. No error
> +	 * is expected.
> +	 */
> +	for (i = 8; i >= 0; i--)
> +		truncate_thp_in_pagecache_to_order(fd_size, i);
> +
> +	offset[0] = 123 * pagesize;
> +	offset[1] = 4 * pagesize;
> +	len[0] = 200 * pagesize;
> +	len[1] = 16 * pagesize;
> +	punch_hole_in_pagecache_thp(fd_size, offset, len, 2);
> +
> +	offset[0] = 259 * pagesize + pagesize / 2;
> +	offset[1] = 33 * pagesize;
> +	len[0] = 129 * pagesize;
> +	len[1] = 16 * pagesize;
> +	punch_hole_in_pagecache_thp(fd_size, offset, len, 2);
> +
>  	return 0;
>  }
> -- 
> 2.35.1
>