* [LKP] [ocfs2] e2ac55b6a8e: ocfs2_init:1612 ERROR: Unable to create ocfs2 debugfs root
@ 2015-04-20 3:25 ` Huang Ying
0 siblings, 0 replies; 11+ messages in thread
From: Huang Ying @ 2015-04-20 3:25 UTC (permalink / raw)
To: Chengyu Song; +Cc: Linus Torvalds, LKML, LKP ML
[-- Attachment #1: Type: text/plain, Size: 2330 bytes --]
FYI, we noticed the below changes on
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
commit e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6 ("ocfs2: incorrect check for debugfs returns")
We found something as below in dmesg.
[ 1.225136] VFS: Disk quotas dquot_6.5.2
[ 1.225814] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.228207] (swapper/0,1,0):ocfs2_init:1612 ERROR: Unable to create ocfs2 debugfs root.
[ 1.232445] (swapper/0,1,0):ocfs2_init:1634 ERROR: status = -19
[ 1.233223] ocfs2: Registered cluster interface o2cb
[ 1.233994] OCFS2 User DLM kernel interface loaded
[ 1.234618] (swapper/0,1,0):o2hb_debug_init:1318 ERROR: status = -19
[ 1.236183] gfs2: GFS2 installed
[ 1.238123] Key type asymmetric registered
BUG: kernel boot hang
Elapsed time: 310
qemu-system-i386 -enable-kvm -cpu Haswell,+smep,+smap -kernel /kernel/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/vmlinuz-4.0.0-02646-ge2ac55b -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-i386-23/rand_boot-1-quantal-core-i386.cgz-i386-randconfig-ib0-04172352-e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6-1-20150418-31554-1woqtdb.yaml ARCH=i386 kconfig=i386-randconfig-ib0-04172352 branch=linus/master commit=e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6 BOOT_IMAGE=/kernel/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/vmlinuz-4.0.0-02646-ge2ac55b RESULT_ROOT=/result/vm-vp-quantal-i386/boot/1/quantal-core-i386.cgz/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-i386-23::dhcp drbd.minor_count=8' -initrd /fs/sde1/initrd-vm-vp-quantal-i386-23 -m 360 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-vm-vp-quantal-i386-23 -serial file:/dev/shm/kboot/serial-vm-vp-quantal-i386-23 -daemonize -display none -monitor null
Thanks,
Ying Huang
[-- Attachment #2: config-4.0.0-02646-ge2ac55b --]
[-- Type: text/plain, Size: 70921 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 4.0.0 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_FHANDLE=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_SRCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_FANOUT_EXACT=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_KTHREAD_PRIO=0
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_NONE is not set
CONFIG_RCU_NOCB_CPU_ZERO=y
# CONFIG_RCU_NOCB_CPU_ALL is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_MEMCG is not set
# CONFIG_CGROUP_HUGETLB is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
CONFIG_DEBUG_BLK_CGROUP=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
# CONFIG_NET_NS is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLUB_CPU_PARTIAL is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_PROFILING=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
CONFIG_OPTPROBES=y
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_FORCE=y
# CONFIG_MODULE_SIG_ALL is not set
#
# Do not forget to sign required modules with scripts/sign-file
#
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
CONFIG_MODULE_SIG_SHA384=y
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha384"
# CONFIG_MODULE_COMPRESS is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_THROTTLING is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=m
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUE_RWLOCK=y
CONFIG_QUEUE_RWLOCK=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
# CONFIG_IOSF_MBI is not set
# CONFIG_X86_32_IRIS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
# CONFIG_LGUEST_GUEST is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=5
CONFIG_X86_L1_CACHE_SHIFT=5
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX32=y
CONFIG_TOSHIBA=m
CONFIG_I8K=y
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_MICROCODE_INTEL_EARLY=y
CONFIG_MICROCODE_AMD_EARLY=y
CONFIG_MICROCODE_EARLY=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_BOUNCE is not set
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CLEANCACHE=y
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
CONFIG_CMA_AREAS=7
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
CONFIG_ZSMALLOC=y
CONFIG_PGTABLE_MAPPING=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
CONFIG_DEBUG_HOTPLUG_CPU0=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_TEST_SUSPEND=y
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_PMIC_OPREGION is not set
CONFIG_SFI=y
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
CONFIG_APM_IGNORE_USER_SUSPEND=y
CONFIG_APM_DO_ENABLE=y
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_ALLOW_INTS=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_GX_SUSPMOD=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=y
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_GOBIOS=y
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_BIOS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=m
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=y
# CONFIG_EISA_PCI_EISA is not set
CONFIG_EISA_VIRTUAL_ROOT=y
# CONFIG_EISA_NAMES is not set
CONFIG_SCx200=m
CONFIG_SCx200HR_TIMER=m
CONFIG_ALIX=y
# CONFIG_NET5501 is not set
CONFIG_GEOS=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=m
# CONFIG_PCMCIA_LOAD_CIS is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
# CONFIG_I82092 is not set
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
CONFIG_HOTPLUG_PCI_IBM=y
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_RAPIDIO=y
# CONFIG_RAPIDIO_TSI721 is not set
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
CONFIG_RAPIDIO_DMA_ENGINE=y
# CONFIG_RAPIDIO_DEBUG is not set
CONFIG_RAPIDIO_ENUM_BASIC=m
#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_TSI57X=m
CONFIG_RAPIDIO_CPS_XX=m
# CONFIG_RAPIDIO_TSI568 is not set
CONFIG_RAPIDIO_CPS_GEN2=m
# CONFIG_X86_SYSFB is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y
#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
# CONFIG_NETFILTER_ADVANCED is not set
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_BRIDGE=m
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_VLAN_8021Q_MVRP is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=m
# CONFIG_IPX is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
# CONFIG_COPS is not set
# CONFIG_IPDDP is not set
# CONFIG_X25 is not set
CONFIG_LAPB=m
CONFIG_PHONET=m
CONFIG_IEEE802154=y
CONFIG_IEEE802154_SOCKET=y
CONFIG_MAC802154=y
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
# CONFIG_DNS_RESOLVER is not set
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_NC is not set
CONFIG_BATMAN_ADV_MCAST=y
CONFIG_VSOCKETS=y
# CONFIG_VMWARE_VMCI_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
CONFIG_NETLINK_DIAG=m
# CONFIG_NET_MPLS_GSO is not set
CONFIG_HSR=m
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
# CONFIG_BT_RFCOMM_TTY is not set
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_HIDP is not set
CONFIG_BT_LE=y
# CONFIG_BT_SELFTEST is not set
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUART=m
# CONFIG_BT_HCIUART_H4 is not set
# CONFIG_BT_HCIUART_BCSP is not set
# CONFIG_BT_HCIUART_ATH3K is not set
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
# CONFIG_BT_HCIDTL1 is not set
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_WILINK=m
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
# CONFIG_RFKILL is not set
CONFIG_RFKILL_REGULATOR=m
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y
CONFIG_CAIF_USB=m
CONFIG_NFC=y
# CONFIG_NFC_DIGITAL is not set
# CONFIG_NFC_NCI is not set
# CONFIG_NFC_HCI is not set
#
# Near Field Communication (NFC) devices
#
# CONFIG_NFC_SIM is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
# CONFIG_DMA_SHARED_BUFFER is not set
CONFIG_DMA_CMA=y
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_PERCENTAGE=10
# CONFIG_CMA_SIZE_SEL_MBYTES is not set
CONFIG_CMA_SIZE_SEL_PERCENTAGE=y
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
#
# Bus devices
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y
# CONFIG_ZRAM is not set
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
#
# DRBD disabled because PROC_FS or INET not selected
#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_NVME=y
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
CONFIG_BLK_DEV_HD=y
CONFIG_BLK_DEV_RSXX=y
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
# CONFIG_AD525X_DPOT_I2C is not set
CONFIG_DUMMY_IRQ=m
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
CONFIG_SGI_IOC4=y
CONFIG_TIFM_CORE=m
# CONFIG_TIFM_7XX1 is not set
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_CS5535_MFGPT=m
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
# CONFIG_CS5535_CLOCK_EVENT_SRC is not set
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=y
# CONFIG_ISL29003 is not set
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1780=m
CONFIG_SENSORS_BH1770=m
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
CONFIG_DS1682=m
# CONFIG_VMWARE_BALLOON is not set
CONFIG_BMP085=y
CONFIG_BMP085_I2C=y
CONFIG_PCH_PHUB=m
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=m
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=m
CONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_VMWARE_VMCI=y
#
# Intel MIC Bus Driver
#
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
CONFIG_ECHO=y
# CONFIG_CXL_BASE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
CONFIG_IDE_LEGACY=y
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_IDE_GD is not set
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_DELKIN=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_PROC_FS is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_OPTI621=y
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=y
CONFIG_BLK_DEV_AMD74XX=m
# CONFIG_BLK_DEV_ATIIXP is not set
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=y
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
CONFIG_BLK_DEV_CS5535=y
CONFIG_BLK_DEV_CS5536=y
# CONFIG_BLK_DEV_HPT366 is not set
CONFIG_BLK_DEV_JMICRON=y
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
CONFIG_BLK_DEV_IT8213=m
# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=y
# CONFIG_BLK_DEV_SIS5513 is not set
CONFIG_BLK_DEV_SLC90E66=m
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
#
# Other IDE chipsets support
#
#
# Note: most of these also require special kernel boot parameters
#
# CONFIG_BLK_DEV_4DRIVES is not set
CONFIG_BLK_DEV_ALI14XX=m
CONFIG_BLK_DEV_DTC2278=y
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_QD65XX is not set
# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_FIREWIRE_NOSY=m
# CONFIG_MACINTOSH_DRIVERS is not set
# CONFIG_NETDEVICES is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5520=m
CONFIG_KEYBOARD_ADP5588=y
CONFIG_KEYBOARD_ADP5589=m
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
CONFIG_KEYBOARD_QT2160=y
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_MATRIX=y
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_LM8333=m
# CONFIG_KEYBOARD_MAX7359 is not set
CONFIG_KEYBOARD_MCS=y
# CONFIG_KEYBOARD_MPR121 is not set
CONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_OPENCORES is not set
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_INPORT is not set
CONFIG_MOUSE_LOGIBM=y
CONFIG_MOUSE_PC110PAD=y
CONFIG_MOUSE_VSXXXAA=y
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
CONFIG_JOYSTICK_A3D=m
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
# CONFIG_JOYSTICK_GUILLEMOT is not set
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_AS5011 is not set
CONFIG_JOYSTICK_JOYDUMP=m
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=y
CONFIG_INPUT_AD714X=m
# CONFIG_INPUT_AD714X_I2C is not set
CONFIG_INPUT_BMA150=m
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MAX77693_HAPTIC is not set
CONFIG_INPUT_MAX8925_ONKEY=m
CONFIG_INPUT_MC13783_PWRBUTTON=m
CONFIG_INPUT_MMA8450=y
CONFIG_INPUT_MPU3050=y
CONFIG_INPUT_APANEL=y
CONFIG_INPUT_GP2A=m
# CONFIG_INPUT_GPIO_BEEPER is not set
CONFIG_INPUT_GPIO_TILT_POLLED=y
CONFIG_INPUT_WISTRON_BTNS=y
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
CONFIG_INPUT_KXTJ9=y
# CONFIG_INPUT_KXTJ9_POLLED_MODE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_REGULATOR_HAPTIC is not set
# CONFIG_INPUT_TPS65218_PWRBUTTON is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PALMAS_PWRBUTTON is not set
CONFIG_INPUT_PCF50633_PMU=m
CONFIG_INPUT_PCF8574=y
# CONFIG_INPUT_PWM_BEEPER is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
CONFIG_INPUT_DA9052_ONKEY=y
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_ADXL34X=m
# CONFIG_INPUT_ADXL34X_I2C is not set
CONFIG_INPUT_CMA3000=m
# CONFIG_INPUT_CMA3000_I2C is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
CONFIG_INPUT_SOC_BUTTON_ARRAY=m
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_SERIO_PS2MULT=m
CONFIG_SERIO_ARC_PS2=m
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
CONFIG_MOXA_SMARTIO=m
# CONFIG_SYNCLINK is not set
CONFIG_SYNCLINKMP=y
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=y
CONFIG_ISI=m
CONFIG_N_HDLC=m
# CONFIG_N_GSM is not set
CONFIG_TRACE_ROUTER=m
CONFIG_TRACE_SINK=y
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_FOURPORT is not set
CONFIG_SERIAL_8250_ACCENT=y
# CONFIG_SERIAL_8250_BOCA is not set
CONFIG_SERIAL_8250_EXAR_ST16C554=m
CONFIG_SERIAL_8250_HUB6=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_RSA is not set
CONFIG_SERIAL_8250_DW=m
# CONFIG_SERIAL_8250_FINTEK is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_SCCNXP=y
# CONFIG_SERIAL_SCCNXP_CONSOLE is not set
# CONFIG_SERIAL_SC16IS7XX is not set
CONFIG_SERIAL_TIMBERDALE=m
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS=y
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_PCH_UART=y
CONFIG_SERIAL_PCH_UART_CONSOLE=y
# CONFIG_SERIAL_ARC is not set
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=m
# CONFIG_SERIAL_MEN_Z135 is not set
# CONFIG_PRINTER is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_GEODE=m
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=m
CONFIG_DTLK=y
CONFIG_R3964=m
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_MWAVE=y
CONFIG_SCx200_GPIO=m
# CONFIG_PC8736x_GPIO is not set
CONFIG_NSC_GPIO=m
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_ISMT=m
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_NFORCE2_S4985 is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PCI=y
CONFIG_I2C_EG20T=m
CONFIG_I2C_GPIO=y
# CONFIG_I2C_KEMPLD is not set
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_XILINX=y
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_TAOS_EVM is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_I2C_CROS_EC_TUNNEL is not set
CONFIG_SCx200_ACB=y
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
# CONFIG_HSI_CHAR is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_ACPI=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_DA9052=y
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_IT8761E=m
# CONFIG_GPIO_F7188X is not set
CONFIG_GPIO_SCH311X=y
CONFIG_GPIO_SCH=y
# CONFIG_GPIO_ICH is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_LYNXPOINT is not set
#
# I2C GPIO expanders:
#
CONFIG_GPIO_ARIZONA=m
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=m
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_RC5T583=y
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_WM831X is not set
CONFIG_GPIO_WM8350=y
CONFIG_GPIO_ADP5520=m
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_INTEL_MID is not set
CONFIG_GPIO_PCH=y
CONFIG_GPIO_ML_IOH=m
CONFIG_GPIO_RDC321X=y
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set
#
# AC97 GPIO expanders:
#
#
# LPC GPIO expanders:
#
CONFIG_GPIO_KEMPLD=m
#
# MODULbus GPIO expanders:
#
# CONFIG_GPIO_PALMAS is not set
CONFIG_GPIO_TPS65910=y
#
# USB GPIO expanders:
#
CONFIG_W1=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=y
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
# CONFIG_W1_SLAVE_DS2413 is not set
# CONFIG_W1_SLAVE_DS2406 is not set
CONFIG_W1_SLAVE_DS2423=y
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=y
# CONFIG_W1_SLAVE_DS28E04 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
# CONFIG_MAX8925_POWER is not set
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=m
CONFIG_WM8350_POWER=m
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_88PM860X=m
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_SBS is not set
CONFIG_BATTERY_BQ27x00=m
CONFIG_BATTERY_BQ27X00_I2C=y
# CONFIG_BATTERY_BQ27X00_PLATFORM is not set
CONFIG_BATTERY_DA9030=m
CONFIG_BATTERY_DA9052=m
CONFIG_BATTERY_MAX17040=m
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_CHARGER_88PM860X=m
CONFIG_CHARGER_PCF50633=m
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_GPIO=m
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_MAX14577=m
# CONFIG_CHARGER_MAX77693 is not set
CONFIG_CHARGER_BQ2415X=m
# CONFIG_CHARGER_BQ24190 is not set
CONFIG_CHARGER_BQ24735=y
# CONFIG_CHARGER_SMB347 is not set
CONFIG_CHARGER_TPS65090=y
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7410=m
# CONFIG_SENSORS_ADT7411 is not set
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_K8TEMP=m
# CONFIG_SENSORS_K10TEMP is not set
CONFIG_SENSORS_FAM15H_POWER=y
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_DA9052_ADC=y
CONFIG_SENSORS_I5K_AMB=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_MC13783_ADC=m
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_HIH6130=m
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LTC2945=m
CONFIG_SENSORS_LTC4151=m
# CONFIG_SENSORS_LTC4215 is not set
CONFIG_SENSORS_LTC4222=m
# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_LTC4260=y
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=y
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
CONFIG_SENSORS_MAX6650=y
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_HTU21 is not set
CONFIG_SENSORS_MCP3021=y
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=y
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NTC_THERMISTOR=y
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=y
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
CONFIG_SENSORS_PCF8591=y
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC2978_REGULATOR is not set
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
# CONFIG_SENSORS_ZL6100 is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=m
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_SCH56XX_COMMON is not set
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS1015=m
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_VIA_CPUTEMP=y
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
CONFIG_SENSORS_W83795_FANCTRL=y
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_WM8350=y
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_GOV_STEP_WISE is not set
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
CONFIG_THERMAL_EMULATION=y
# CONFIG_INTEL_POWERCLAMP is not set
# CONFIG_INT340X_THERMAL is not set
#
# Texas Instruments thermal drivers
#
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=m
# CONFIG_MFD_AS3711 is not set
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X is not set
CONFIG_MFD_CROS_EC=y
# CONFIG_MFD_CROS_EC_I2C is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_I2C=y
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_I2C=m
# CONFIG_HTC_PASIC3 is not set
CONFIG_HTC_I2CPLD=y
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=m
# CONFIG_MFD_88PM800 is not set
CONFIG_MFD_88PM805=m
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX8907 is not set
CONFIG_MFD_MAX8925=y
# CONFIG_MFD_MAX8997 is not set
CONFIG_MFD_MAX8998=y
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_RETU is not set
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
CONFIG_MFD_RDC321X=y
CONFIG_MFD_RTSX_PCI=y
# CONFIG_MFD_RT5033 is not set
CONFIG_MFD_RC5T583=y
# CONFIG_MFD_RN5T618 is not set
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SMSC=y
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
# CONFIG_AB3100_OTP is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=m
# CONFIG_MFD_LP3943 is not set
CONFIG_MFD_LP8788=y
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=m
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
# CONFIG_MFD_TPS65912_I2C is not set
CONFIG_MFD_TPS80031=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=m
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
# CONFIG_MFD_WM5102 is not set
# CONFIG_MFD_WM5110 is not set
# CONFIG_MFD_WM8997 is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_WM8994 is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=m
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_88PM8607 is not set
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_AD5398=y
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_AAT2870=y
# CONFIG_REGULATOR_AB3100 is not set
CONFIG_REGULATOR_DA903X=y
# CONFIG_REGULATOR_DA9052 is not set
CONFIG_REGULATOR_DA9210=m
# CONFIG_REGULATOR_DA9211 is not set
CONFIG_REGULATOR_FAN53555=y
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL9305 is not set
CONFIG_REGULATOR_ISL6271A=m
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_LP8788=y
# CONFIG_REGULATOR_LTC3589 is not set
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=m
# CONFIG_REGULATOR_MAX8925 is not set
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_MAX8973=m
# CONFIG_REGULATOR_MAX8998 is not set
CONFIG_REGULATOR_MAX77693=y
# CONFIG_REGULATOR_MC13783 is not set
# CONFIG_REGULATOR_MC13892 is not set
CONFIG_REGULATOR_PALMAS=m
CONFIG_REGULATOR_PCF50633=m
CONFIG_REGULATOR_PFUZE100=y
# CONFIG_REGULATOR_PWM is not set
CONFIG_REGULATOR_RC5T583=y
CONFIG_REGULATOR_S2MPA01=m
CONFIG_REGULATOR_S2MPS11=m
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS51632=y
# CONFIG_REGULATOR_TPS6105X is not set
CONFIG_REGULATOR_TPS62360=m
CONFIG_REGULATOR_TPS65023=y
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_REGULATOR_TPS65090=m
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TPS80031=m
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8400=m
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=m
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=m
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=y
CONFIG_AGP_EFFICEON=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
#
# Direct Rendering Manager
#
# CONFIG_DRM is not set
#
# Frame buffer Devices
#
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_VGASTATE is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_MDA_CONSOLE=m
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_SOUND=m
# CONFIG_SOUND_OSS_CORE is not set
# CONFIG_SND is not set
# CONFIG_SOUND_PRIME is not set
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set
CONFIG_UHID=y
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=y
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=y
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not set
CONFIG_HID_WALTOP=m
# CONFIG_HID_GYRATION is not set
CONFIG_HID_ICADE=y
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
# CONFIG_HID_LOGITECH_HIDPP is not set
# CONFIG_LOGITECH_FF is not set
CONFIG_LOGIRUMBLEPAD2_FF=y
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_ORTEK=m
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PRIMAX=m
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEELSERIES=m
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=y
CONFIG_HID_THINGM=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=y
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=y
# CONFIG_HID_SENSOR_HUB is not set
#
# I2C HID support
#
CONFIG_I2C_HID=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
#
# USB port drivers
#
#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_GADGET is not set
CONFIG_UWB=y
# CONFIG_UWB_WHCI is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=m
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
CONFIG_MS_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
# CONFIG_MEMSTICK_JMICRON_38X is not set
# CONFIG_MEMSTICK_R592 is not set
# CONFIG_MEMSTICK_REALTEK_PCI is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3533 is not set
CONFIG_LEDS_LM3642=m
CONFIG_LEDS_NET48XX=m
CONFIG_LEDS_WRAP=m
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=m
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=m
CONFIG_LEDS_LP8501=m
# CONFIG_LEDS_LP8788 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM831X_STATUS=y
# CONFIG_LEDS_WM8350 is not set
# CONFIG_LEDS_DA903X is not set
# CONFIG_LEDS_DA9052 is not set
CONFIG_LEDS_PWM=m
CONFIG_LEDS_REGULATOR=m
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_ADP5520=m
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_LM355x=y
CONFIG_LEDS_OT200=y
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_MM_EDAC=m
# CONFIG_EDAC_AMD76X is not set
CONFIG_EDAC_E7XXX=m
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82975X is not set
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
# CONFIG_EDAC_IE31200 is not set
CONFIG_EDAC_X38=m
# CONFIG_EDAC_I5400 is not set
CONFIG_EDAC_I82860=m
# CONFIG_EDAC_R82600 is not set
CONFIG_EDAC_I5000=m
# CONFIG_EDAC_I5100 is not set
CONFIG_EDAC_I7300=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_SYSTOHC is not set
CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_88PM860X is not set
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_DS1307 is not set
CONFIG_RTC_DRV_DS1374=y
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_LP8788=m
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_MAX8925=y
CONFIG_RTC_DRV_MAX8998=m
CONFIG_RTC_DRV_RS5C372=y
# CONFIG_RTC_DRV_ISL1208 is not set
CONFIG_RTC_DRV_ISL12022=m
# CONFIG_RTC_DRV_ISL12057 is not set
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PALMAS=y
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF85063 is not set
CONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_TPS65910=m
CONFIG_RTC_DRV_TPS80031=y
CONFIG_RTC_DRV_RC5T583=y
CONFIG_RTC_DRV_S35390A=m
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
CONFIG_RTC_DRV_RV3029C2=y
CONFIG_RTC_DRV_S5M=y
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1286=y
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_DS2404 is not set
CONFIG_RTC_DRV_DA9052=m
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=y
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=m
CONFIG_RTC_DRV_WM831X=m
CONFIG_RTC_DRV_WM8350=m
CONFIG_RTC_DRV_PCF50633=m
CONFIG_RTC_DRV_AB3100=m
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_MC13XXX=m
# CONFIG_RTC_DRV_XGENE is not set
#
# HID Sensor RTC drivers
#
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
CONFIG_DW_DMAC_CORE=y
# CONFIG_DW_DMAC is not set
CONFIG_DW_DMAC_PCI=y
CONFIG_PCH_DMA=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ACPI=y
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_THINKPAD_ACPI is not set
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
CONFIG_IBM_RTL=m
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_PVPANIC is not set
# CONFIG_CHROME_PLATFORMS is not set
#
# Hardware Spinlock drivers
#
#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers
#
#
# SOC (System On Chip) specific Drivers
#
# CONFIG_SOC_TI is not set
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_GPIO=m
CONFIG_EXTCON_MAX14577=m
# CONFIG_EXTCON_MAX77693 is not set
# CONFIG_EXTCON_PALMAS is not set
# CONFIG_EXTCON_RT8973A is not set
# CONFIG_EXTCON_SM5502 is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_LPSS is not set
CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=y
CONFIG_SERIAL_IPOCTAL=y
CONFIG_RESET_CONTROLLER=y
CONFIG_FMC=y
# CONFIG_FMC_FAKEDEV is not set
CONFIG_FMC_TRIVIAL=m
# CONFIG_FMC_WRITE_EEPROM is not set
# CONFIG_FMC_CHARDEV is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_POWERCAP=y
CONFIG_MCB=m
# CONFIG_MCB_PCI is not set
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set
#
# Android
#
# CONFIG_ANDROID is not set
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=y
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4_USE_FOR_EXT23 is not set
# CONFIG_EXT4_FS_POSIX_ACL is not set
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=y
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_OCFS2_DEBUG_FS=y
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y
CONFIG_BTRFS_DEBUG=y
# CONFIG_BTRFS_ASSERT is not set
CONFIG_NILFS2_FS=m
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
CONFIG_FSCACHE=m
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
# CONFIG_CACHEFILES is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
CONFIG_NTFS_DEBUG=y
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=m
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=m
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=m
# CONFIG_NLS_MAC_INUIT is not set
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
# CONFIG_DEBUG_OBJECTS_FREE is not set
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_VMACACHE is not set
CONFIG_DEBUG_VM_RB=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_TIMER_STATS=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_KOBJECT_RELEASE is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
# CONFIG_PROVE_RCU_REPEATEDLY is not set
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_CPU_STALL_INFO=y
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
# CONFIG_FAIL_PAGE_ALLOC is not set
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_LATENCYTOP=y
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
#
# Runtime Testing
#
# CONFIG_TEST_LIST_SORT is not set
CONFIG_KPROBES_SANITY_TEST=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_RHASHTABLE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_BUILD_DOCSRC=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
CONFIG_TEST_USER_COPY=m
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_GLUE_HELPER_X86=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
# CONFIG_CRYPTO_HMAC is not set
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_586=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_LZ4=y
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_DRBG_MENU is not set
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
# CONFIG_CRYPTO_USER_API_RNG is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_CRYPTO_DEV_GEODE=y
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
# CONFIG_CRYPTO_DEV_CCP_CRYPTO is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS7_MESSAGE_PARSER is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
CONFIG_CRC32_SARWATE=y
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_AVERAGE is not set
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
CONFIG_DDR=y
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_ARCH_HAS_SG_CHAIN=y
[-- Attachment #3: .dmesg --]
[-- Type: text/plain, Size: 46161 bytes --]
early console in setup code
Probing EDD (edd=off to disable)... ok
early console in decompress_kernel
Decompressing Linux... Parsing ELF... No relocation needed... done.
Booting the kernel.
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 4.0.0-02646-ge2ac55b (kbuild@lkp-ib03) (gcc version 4.9.2 (Debian 4.9.2-10) ) #15 SMP Sat Apr 18 20:13:55 CST 2015
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000167dffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000167e0000-0x00000000167fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x167e0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask FF80000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000f0ed0-0x000f0edf] mapped at [c00f0ed0]
[ 0.000000] mpc: f0ee0-f0fb0
[ 0.000000] initial memory mapped: [mem 0x00000000-0x029fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x14a00000-0x14bfffff]
[ 0.000000] [mem 0x14a00000-0x14bfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x149fffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x149fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x14c00000-0x167dffff]
[ 0.000000] [mem 0x14c00000-0x165fffff] page 2M
[ 0.000000] [mem 0x16600000-0x167dffff] page 4k
[ 0.000000] BRK [0x024ef000, 0x024effff] PGTABLE
[ 0.000000] BRK [0x024f0000, 0x024f0fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x14c57000-0x167d7fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000F0CF0 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x167E1854 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0x167E0B37 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x167E0040 000AF7 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACS 0x167E0000 000040
[ 0.000000] ACPI: SSDT 0x167E0BAB 000BF9 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0x167E17A4 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0x167E181C 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffb000 ( fee00000)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 359MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 167e0000
[ 0.000000] low ram: 0 - 167e0000
[ 0.000000] cma: dma_contiguous_reserve(limit 167e0000)
[ 0.000000] cma: dma_contiguous_reserve: reserving 35 MiB for global area
[ 0.000000] cma: cma_declare_contiguous(size 0x00000000023f3000, base 0x0000000000000000, limit 0x00000000167e0000 alignment 0x0000000000000000)
[ 0.000000] cma: Reserved 36 MiB at 0x0000000012800000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:167df001, primary cpu clock
[ 0.000000] clocksource kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000167dffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000167dffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000167dffff]
[ 0.000000] On node 0 totalpages: 92030
[ 0.000000] free_area_init_node: node 0, pgdat c19eb9a0, node_mem_map d2530020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 688 pages used for memmap
[ 0.000000] Normal zone: 88032 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffb000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] e820: [mem 0x16800000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 336 pages/cpu @d23e0000 s1346816 r0 d29440 u1376256
[ 0.000000] pcpu-alloc: s1346816 r0 d29440 u1376256 alloc=336*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 123e3840
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 91310
[ 0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-i386-23/rand_boot-1-quantal-core-i386.cgz-i386-randconfig-ib0-04172352-e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6-1-20150418-31554-1woqtdb.yaml ARCH=i386 kconfig=i386-randconfig-ib0-04172352 branch=linus/master commit=e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6 BOOT_IMAGE=/kernel/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/vmlinuz-4.0.0-02646-ge2ac55b RESULT_ROOT=/result/vm-vp-quantal-i386/boot/1/quantal-core-i386.cgz/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-i386-23::dhcp drbd.minor_count=8
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 276904K/368120K available (7195K kernel code, 472K rwdata, 2512K rodata, 1836K init, 9296K bss, 54352K reserved, 36864K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffe6e000 - 0xfffff000 (1604 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xd6fe0000 - 0xffbfe000 ( 652 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd67e0000 ( 359 MB)
[ 0.000000] .init : 0xc19f4000 - 0xc1bbf000 (1836 kB)
[ 0.000000] .data : 0xc17071ca - 0xc19f20a0 (2987 kB)
[ 0.000000] .text : 0xc1000000 - 0xc17071ca (7196 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] Running RCU self tests
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=d1c08000 soft=d1c0a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] bootconsole [earlyser0] disabled
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 4.0.0-02646-ge2ac55b (kbuild@lkp-ib03) (gcc version 4.9.2 (Debian 4.9.2-10) ) #15 SMP Sat Apr 18 20:13:55 CST 2015
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000167dffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000167e0000-0x00000000167fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x167e0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask FF80000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000f0ed0-0x000f0edf] mapped at [c00f0ed0]
[ 0.000000] mpc: f0ee0-f0fb0
[ 0.000000] initial memory mapped: [mem 0x00000000-0x029fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x14a00000-0x14bfffff]
[ 0.000000] [mem 0x14a00000-0x14bfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x149fffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x149fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x14c00000-0x167dffff]
[ 0.000000] [mem 0x14c00000-0x165fffff] page 2M
[ 0.000000] [mem 0x16600000-0x167dffff] page 4k
[ 0.000000] BRK [0x024ef000, 0x024effff] PGTABLE
[ 0.000000] BRK [0x024f0000, 0x024f0fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x14c57000-0x167d7fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000F0CF0 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x167E1854 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0x167E0B37 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x167E0040 000AF7 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACS 0x167E0000 000040
[ 0.000000] ACPI: SSDT 0x167E0BAB 000BF9 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0x167E17A4 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0x167E181C 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffb000 ( fee00000)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 359MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 167e0000
[ 0.000000] low ram: 0 - 167e0000
[ 0.000000] cma: dma_contiguous_reserve(limit 167e0000)
[ 0.000000] cma: dma_contiguous_reserve: reserving 35 MiB for global area
[ 0.000000] cma: cma_declare_contiguous(size 0x00000000023f3000, base 0x0000000000000000, limit 0x00000000167e0000 alignment 0x0000000000000000)
[ 0.000000] cma: Reserved 36 MiB at 0x0000000012800000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:167df001, primary cpu clock
[ 0.000000] clocksource kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000167dffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000167dffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000167dffff]
[ 0.000000] On node 0 totalpages: 92030
[ 0.000000] free_area_init_node: node 0, pgdat c19eb9a0, node_mem_map d2530020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 688 pages used for memmap
[ 0.000000] Normal zone: 88032 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffb000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] e820: [mem 0x16800000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 336 pages/cpu @d23e0000 s1346816 r0 d29440 u1376256
[ 0.000000] pcpu-alloc: s1346816 r0 d29440 u1376256 alloc=336*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 123e3840
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 91310
[ 0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-i386-23/rand_boot-1-quantal-core-i386.cgz-i386-randconfig-ib0-04172352-e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6-1-20150418-31554-1woqtdb.yaml ARCH=i386 kconfig=i386-randconfig-ib0-04172352 branch=linus/master commit=e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6 BOOT_IMAGE=/kernel/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/vmlinuz-4.0.0-02646-ge2ac55b RESULT_ROOT=/result/vm-vp-quantal-i386/boot/1/quantal-core-i386.cgz/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-i386-23::dhcp drbd.minor_count=8
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 276904K/368120K available (7195K kernel code, 472K rwdata, 2512K rodata, 1836K init, 9296K bss, 54352K reserved, 36864K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffe6e000 - 0xfffff000 (1604 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xd6fe0000 - 0xffbfe000 ( 652 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd67e0000 ( 359 MB)
[ 0.000000] .init : 0xc19f4000 - 0xc1bbf000 (1836 kB)
[ 0.000000] .data : 0xc17071ca - 0xc19f20a0 (2987 kB)
[ 0.000000] .text : 0xc1000000 - 0xc17071ca (7196 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] Running RCU self tests
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=d1c08000 soft=d1c0a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] bootconsole [earlyser0] disabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.000000] ... CHAINHASH_SIZE: 32768
[ 0.000000] memory used by lock dependency info: 5167 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2693.508 MHz processor
[ 0.003000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=2693508)
[ 0.003004] pid_max: default: 32768 minimum: 301
[ 0.004018] ACPI: Core revision 20150204
[ 0.006632] ACPI: All ACPI Tables successfully acquired
[ 0.007263] Security Framework initialized
[ 0.008025] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.008821] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.010258] Initializing cgroup subsys blkio
[ 0.010838] Initializing cgroup subsys devices
[ 0.011016] Initializing cgroup subsys freezer
[ 0.012016] Initializing cgroup subsys net_cls
[ 0.012613] Initializing cgroup subsys perf_event
[ 0.013094] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.014003] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.024346] Freeing SMP alternatives memory: 24K (c1bbf000 - c1bc5000)
[ 0.028944] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.029056] enabled ExtINT on CPU#0
[ 0.030709] ENABLING IO-APIC IRQs
[ 0.031017] init IO_APIC IRQs
[ 0.031470] apic 0 pin 0 not connected
[ 0.032038] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.033032] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.034024] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.035020] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.036020] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.037019] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[ 0.038020] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.039019] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.040019] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.041019] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.042021] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[ 0.043020] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[ 0.044020] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.045020] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[ 0.046020] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[ 0.047024] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[ 0.048017] apic 0 pin 16 not connected
[ 0.049002] apic 0 pin 17 not connected
[ 0.049545] apic 0 pin 18 not connected
[ 0.050002] apic 0 pin 19 not connected
[ 0.050541] apic 0 pin 20 not connected
[ 0.051002] apic 0 pin 21 not connected
[ 0.051540] apic 0 pin 22 not connected
[ 0.052002] apic 0 pin 23 not connected
[ 0.052676] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053028] TSC deadline timer enabled
[ 0.053550] smpboot: CPU0: Intel Core Processor (Haswell) (fam: 06, model: 3c, stepping: 01)
[ 0.054026] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only.
[ 0.055662] x86: Booted up 1 node, 1 CPUs
[ 0.056008] smpboot: Total of 1 processors activated (5387.01 BogoMIPS)
[ 0.057614] devtmpfs: initialized
[ 0.059022] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.060240] xor: automatically using best checksumming function:
[ 0.070004] avx : 29496.000 MB/sec
[ 0.070908] regulator-dummy: no parameters
[ 0.071354] NET: Registered protocol family 16
[ 0.072475] EISA bus registered
[ 0.072951] cpuidle: using governor ladder
[ 0.073008] cpuidle: using governor menu
[ 0.073811] ACPI: bus type PCI registered
[ 0.074194] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.075006] PCI: PCI BIOS revision 2.10 entry at 0xfd456, last bus=0
[ 0.096009] raid6: mmxx1 5250 MB/s
[ 0.113012] raid6: mmxx2 5679 MB/s
[ 0.130013] raid6: sse1x1 4429 MB/s
[ 0.147009] raid6: sse1x2 5480 MB/s
[ 0.164009] raid6: sse2x1 8082 MB/s
[ 0.181005] raid6: sse2x2 9949 MB/s
[ 0.181526] raid6: using algorithm sse2x2 (9949 MB/s)
[ 0.182005] raid6: using ssse3x1 recovery algorithm
[ 0.182802] ACPI: Added _OSI(Module Device)
[ 0.183005] ACPI: Added _OSI(Processor Device)
[ 0.183587] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.184005] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.186440] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.189875] ACPI: Interpreter enabled
[ 0.190012] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.191006] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.192031] ACPI: (supports S0 S3 S5)
[ 0.192534] ACPI: Using IOAPIC for interrupt routing
[ 0.193037] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.201666] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.202011] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.202839] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.203274] PCI host bridge to bus 0000:00
[ 0.203830] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.204006] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.204792] pci_bus 0000:00: root bus resource [io 0x0d00-0xadff window]
[ 0.205005] pci_bus 0000:00: root bus resource [io 0xae0f-0xaeff window]
[ 0.205787] pci_bus 0000:00: root bus resource [io 0xaf20-0xafdf window]
[ 0.206005] pci_bus 0000:00: root bus resource [io 0xafe4-0xffff window]
[ 0.206786] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.207005] pci_bus 0000:00: root bus resource [mem 0x16800000-0xfebfffff window]
[ 0.208030] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.209321] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.210545] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.213008] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f]
[ 0.214410] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.215005] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.215771] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.216005] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.217069] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.218072] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.219014] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.220161] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[ 0.221410] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[ 0.222812] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff]
[ 0.226394] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[ 0.227311] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 0.228739] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[ 0.229699] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f]
[ 0.233400] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[ 0.234318] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[ 0.235402] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[ 0.238437] pci_bus 0000:00: on NUMA node 0
[ 0.239647] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.240632] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.241614] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.242616] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.243554] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.244805] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 0.245720] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.246000] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.246007] vgaarb: loaded
[ 0.246428] vgaarb: bridge control possible 0000:00:02.0
[ 0.247494] PCI: Using ACPI for IRQ routing
[ 0.248005] PCI: pci_cache_line_size set to 64 bytes
[ 0.248742] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.249021] e820: reserve RAM buffer [mem 0x167e0000-0x17ffffff]
[ 0.250267] nfc: nfc_init: NFC Core ver 0.1
[ 0.250884] NET: Registered protocol family 39
[ 0.251254] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.252263] Switched to clocksource kvm-clock
[ 0.253000] pnp: PnP ACPI init
[ 0.253402] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.254510] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.255338] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.256448] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.257257] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.258368] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.268746] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.269788] pnp 00:03: [dma 2]
[ 0.270297] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.271131] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.272211] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.273047] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.274131] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.275311] pnp: PnP ACPI: found 6 devices
[ 0.315045] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.316153] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.316892] pci_bus 0000:00: resource 5 [io 0x0d00-0xadff window]
[ 0.317628] pci_bus 0000:00: resource 6 [io 0xae0f-0xaeff window]
[ 0.318371] pci_bus 0000:00: resource 7 [io 0xaf20-0xafdf window]
[ 0.319109] pci_bus 0000:00: resource 8 [io 0xafe4-0xffff window]
[ 0.319848] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window]
[ 0.320675] pci_bus 0000:00: resource 10 [mem 0x16800000-0xfebfffff window]
[ 0.321522] NET: Registered protocol family 1
[ 0.322115] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.322829] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.323543] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.324302] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.325018] PCI: CLS 0 bytes, default 64
[ 0.325768] Trying to unpack rootfs image as initramfs...
[ 1.196233] Freeing initrd memory: 28164K (d4c57000 - d67d8000)
[ 1.203629] microcode: CPU0 sig=0x306c1, pf=0x1, revision=0x1
[ 1.204567] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.205899] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 1.206660] apm: overridden by ACPI.
[ 1.207571] cryptomgr_test (21) used greatest stack depth: 7028 bytes left
[ 1.209424] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 1.210224] Initialise system trusted keyring
[ 1.210908] Kprobe smoke test: started
[ 1.217850] Kprobe smoke test: passed successfully
[ 1.218914] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.225136] VFS: Disk quotas dquot_6.5.2
[ 1.225814] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.228207] (swapper/0,1,0):ocfs2_init:1612 ERROR: Unable to create ocfs2 debugfs root.
[ 1.232445] (swapper/0,1,0):ocfs2_init:1634 ERROR: status = -19
[ 1.233223] ocfs2: Registered cluster interface o2cb
[ 1.233994] OCFS2 User DLM kernel interface loaded
[ 1.234618] (swapper/0,1,0):o2hb_debug_init:1318 ERROR: status = -19
[ 1.236183] gfs2: GFS2 installed
[ 1.238123] Key type asymmetric registered
[ 1.238687] Asymmetric key parser 'x509' registered
[ 1.239438] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1.240485] io scheduler noop registered (default)
[ 1.241119] start plist test
[ 1.243840] end plist test
[ 1.244504] xz_dec_test: module loaded
[ 1.245044] xz_dec_test: Create a device node with 'mknod xz_dec_test c 253 0' and write .xz files to it.
[ 1.246527] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.247266] ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6
[ 1.248294] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.249309] ACPI: Power Button [PWRF]
[ 1.279461] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.305227] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.315164] Initializing Nozomi driver 2.1d
[ 1.315762] SyncLink MultiPort driver $Revision: 4.38 $
[ 1.323995] SyncLink MultiPort driver $Revision: 4.38 $, tty major#249
[ 1.325018] DoubleTalk PC - not found
[ 1.325574] smapi::smapi_init, ERROR invalid usSmapiID
[ 1.326250] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[ 1.327424] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[ 1.328404] mwave: mwavedd::mwave_init: Error: Failed to initialize
[ 1.329196] Linux agpgart interface v0.103
[ 1.330528] Floppy drive(s): fd0 is 1.44M
[ 1.335704] brd: module loaded
[ 1.336337] MM: desc_per_page = 128
[ 1.336886] mtip32xx Version 1.3.1
[ 1.337394] Error creating debugfs parent
[ 1.338211] Guest personality initialized and is inactive
[ 1.338988] VMCI host device registered (name=vmci, major=10, minor=62)
[ 1.339787] Initialized host personality
[ 1.340609] Uniform Multi-Platform E-IDE driver
[ 1.341362] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[ 1.342333] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[ 1.343538] ide0: BM-DMA at 0xc040-0xc047
[ 1.344150] ide1: BM-DMA at 0xc048-0xc04f
[ 1.344729] Probing IDE interface ide0...
[ 1.354662] FDC 0 is a S82078B
[ 1.864216] Probing IDE interface ide1...
[ 2.200141] tsc: Refined TSC clocksource calibration: 2693.506 MHz
[ 2.200896] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x26d347b2dd9, max_idle_ns: 440795223616 ns
[ 2.536108] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[ 3.149195] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0
[ 3.150218] hdc: MWDMA2 mode selected
[ 3.150902] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.151655] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.153206] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 3.154612] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 3.156468] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.157196] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.159168] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 3.160902] logibm.c: Didn't find Logitech busmouse at 0x23c
[ 3.162051] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[ 3.162927] wistron_btns: System unknown
[ 3.164105] Driver for 1-wire Dallas network protocol.
[ 3.165995] platform eisa.0: Probing EISA bus 0
[ 3.166623] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 3.167463] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 3.168269] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 3.169069] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 3.169850] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 3.170652] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 3.171462] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 3.172275] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 3.173090] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 3.173874] platform eisa.0: EISA: Detected 0 cards
[ 3.174776] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 3.176701] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[ 3.177957] DECnet: Routing cache hash table of 512 buckets, 22Kbytes
[ 3.178814] NET: Registered protocol family 12
[ 3.179449] 8021q: 802.1Q VLAN Support v1.8
[ 3.180130] NET: Registered protocol family 37
[ 3.180753] NET: Registered protocol family 36
[ 3.181636] ... APIC ID: 00000000 (0)
[ 3.182219] ... APIC VERSION: 01050014
[ 3.182366] 0000000000000000000000000000000000000000000000000000000000000000
[ 3.182366] 000000000e200000000000000000000000000000000000000000000000000000
[ 3.182366] 0000000000000000000000000000000000000000000000000000000000008000
[ 3.182366]
[ 3.187099] number of MP IRQ sources: 15.
[ 3.187653] number of IO-APIC #0 registers: 24.
[ 3.188282] testing the IO APIC.......................
[ 3.188957] IO APIC #0......
[ 3.189427] .... register #00: 00000000
[ 3.189973] ....... : physical APIC id: 00
[ 3.190579] ....... : Delivery Type: 0
[ 3.191154] ....... : LTS : 0
[ 3.191700] .... register #01: 00170011
[ 3.192261] ....... : max redirection entries: 17
[ 3.192914] ....... : PRQ implemented: 0
[ 3.193507] ....... : IO APIC version: 11
[ 3.194116] .... register #02: 00000000
[ 3.194649] ....... : arbitration: 00
[ 3.195227] .... IRQ redirection table:
[ 3.195767] 1 0 0 0 0 0 0 00
[ 3.196402] 0 0 0 0 0 1 1 31
[ 3.197109] 0 0 0 0 0 1 1 30
[ 3.198134] 0 0 0 0 0 1 1 33
[ 3.199188] 1 0 0 0 0 1 1 34
[ 3.200247] 1 1 0 0 0 1 1 35
[ 3.201293] 0 0 0 0 0 1 1 36
[ 3.202360] 0 0 0 0 0 1 1 37
[ 3.203406] 0 0 0 0 0 1 1 38
[ 3.204452] 0 1 0 0 0 1 1 39
[ 3.205517] 1 1 0 0 0 1 1 3A
[ 3.206568] 1 1 0 0 0 1 1 3B
[ 3.207610] 0 0 0 0 0 1 1 3C
[ 3.208670] 0 0 0 0 0 1 1 3D
[ 3.209730] 0 0 0 0 0 1 1 3E
[ 3.210796] 0 0 0 0 0 1 1 3F
[ 3.211855] 1 0 0 0 0 0 0 00
[ 3.212906] 1 0 0 0 0 0 0 00
[ 3.213952] 1 0 0 0 0 0 0 00
[ 3.214999] 1 0 0 0 0 0 0 00
[ 3.216032] 1 0 0 0 0 0 0 00
[ 3.217067] 1 0 0 0 0 0 0 00
[ 3.218104] 1 0 0 0 0 0 0 00
[ 3.219155] 1 0 0 0 0 0 0 00
[ 3.220184] IRQ to pin mappings:
[ 3.220998] IRQ0 -> 0:2
[ 3.238836] IRQ1 -> 0:1
[ 3.239726] IRQ3 -> 0:3
[ 3.240608] IRQ4 -> 0:4
[ 3.241499] IRQ5 -> 0:5
[ 3.242399] IRQ6 -> 0:6
[ 3.243300] IRQ7 -> 0:7
[ 3.244190] IRQ8 -> 0:8
[ 3.245078] IRQ9 -> 0:9
[ 3.245951] IRQ10 -> 0:10
[ 3.246905] IRQ11 -> 0:11
[ 3.247514] IRQ12 -> 0:12
[ 3.248084] IRQ13 -> 0:13
[ 3.248615] IRQ14 -> 0:14
[ 3.249174] IRQ15 -> 0:15
[ 3.249705] .................................... done.
[ 3.250589] Using IPI No-Shortcut mode
[ 3.251516] Loading compiled-in X.509 certificates
[ 3.254874] Loaded X.509 cert 'Magrathea: Glacier signing key: e428e5604eb6dea2e9f39cf6ede8a52264f1b045'
[ 3.256155] registered taskstats version 1
[ 3.258165] Btrfs loaded, debug=on
[ 3.258761] BTRFS: selftest: Running btrfs free space cache tests
[ 3.259569] BTRFS: selftest: Running extent only tests
[ 3.260307] BTRFS: selftest: Running bitmap only tests
[ 3.261028] BTRFS: selftest: Running bitmap and extent tests
[ 3.261749] BTRFS: selftest: Running space stealing from bitmap to extent
[ 3.262834] BTRFS: selftest: Free space cache tests finished
[ 3.263646] BTRFS: selftest: Running extent buffer operation tests
[ 3.264312] BTRFS: selftest: Running btrfs_split_item tests
[ 3.265270] BTRFS: selftest: Running find delalloc tests
[ 302.048196] kworker/dying (69) used greatest stack depth: 6752 bytes left
BUG: kernel boot hang
Elapsed time: 310
qemu-system-i386 -enable-kvm -cpu Haswell,+smep,+smap -kernel /kernel/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/vmlinuz-4.0.0-02646-ge2ac55b -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-i386-23/rand_boot-1-quantal-core-i386.cgz-i386-randconfig-ib0-04172352-e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6-1-20150418-31554-1woqtdb.yaml ARCH=i386 kconfig=i386-randconfig-ib0-04172352 branch=linus/master commit=e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6 BOOT_IMAGE=/kernel/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/vmlinuz-4.0.0-02646-ge2ac55b RESULT_ROOT=/result/vm-vp-quantal-i386/boot/1/quantal-core-i386.cgz/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-i386-23::dhcp drbd.minor_count=8' -initrd /fs/sde1/initrd-vm-vp-quantal-i386-23 -m 360 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-vm-vp-quantal-i386-23 -serial file:/dev/shm/kboot/serial-vm-vp-quantal-i386-23 -daemonize -display none -monitor null
\r
[-- Attachment #4: Type: text/plain, Size: 89 bytes --]
_______________________________________________
LKP mailing list
LKP@linux.intel.com
\r
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ocfs2] e2ac55b6a8e: ocfs2_init:1612 ERROR: Unable to create ocfs2 debugfs root
@ 2015-04-20 3:25 ` Huang Ying
0 siblings, 0 replies; 11+ messages in thread
From: Huang Ying @ 2015-04-20 3:25 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 2424 bytes --]
FYI, we noticed the below changes on
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
commit e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6 ("ocfs2: incorrect check for debugfs returns")
We found something as below in dmesg.
[ 1.225136] VFS: Disk quotas dquot_6.5.2
[ 1.225814] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.228207] (swapper/0,1,0):ocfs2_init:1612 ERROR: Unable to create ocfs2 debugfs root.
[ 1.232445] (swapper/0,1,0):ocfs2_init:1634 ERROR: status = -19
[ 1.233223] ocfs2: Registered cluster interface o2cb
[ 1.233994] OCFS2 User DLM kernel interface loaded
[ 1.234618] (swapper/0,1,0):o2hb_debug_init:1318 ERROR: status = -19
[ 1.236183] gfs2: GFS2 installed
[ 1.238123] Key type asymmetric registered
BUG: kernel boot hang
Elapsed time: 310
qemu-system-i386 -enable-kvm -cpu Haswell,+smep,+smap -kernel /kernel/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/vmlinuz-4.0.0-02646-ge2ac55b -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-i386-23/rand_boot-1-quantal-core-i386.cgz-i386-randconfig-ib0-04172352-e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6-1-20150418-31554-1woqtdb.yaml ARCH=i386 kconfig=i386-randconfig-ib0-04172352 branch=linus/master commit=e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6 BOOT_IMAGE=/kernel/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/vmlinuz-4.0.0-02646-ge2ac55b RESULT_ROOT=/result/vm-vp-quantal-i386/boot/1/quantal-core-i386.cgz/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-i386-23::dhcp drbd.minor_count=8' -initrd /fs/sde1/initrd-vm-vp-quantal-i386-23 -m 360 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-vm-vp-quantal-i386-23 -serial file:/dev/shm/kboot/serial-vm-vp-quantal-i386-23 -daemonize -display none -monitor null
Thanks,
Ying Huang
_______________________________________________
LKP mailing list
LKP(a)linux.intel.com
[-- Attachment #2: config-4.0.0-02646-ge2ac55b --]
[-- Type: text/plain, Size: 70921 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 4.0.0 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_FHANDLE=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_SRCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_FANOUT_EXACT=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_KTHREAD_PRIO=0
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_NONE is not set
CONFIG_RCU_NOCB_CPU_ZERO=y
# CONFIG_RCU_NOCB_CPU_ALL is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_MEMCG is not set
# CONFIG_CGROUP_HUGETLB is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
CONFIG_DEBUG_BLK_CGROUP=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
# CONFIG_NET_NS is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLUB_CPU_PARTIAL is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_PROFILING=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
CONFIG_OPTPROBES=y
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_FORCE=y
# CONFIG_MODULE_SIG_ALL is not set
#
# Do not forget to sign required modules with scripts/sign-file
#
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
CONFIG_MODULE_SIG_SHA384=y
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha384"
# CONFIG_MODULE_COMPRESS is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_THROTTLING is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=m
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUE_RWLOCK=y
CONFIG_QUEUE_RWLOCK=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
# CONFIG_IOSF_MBI is not set
# CONFIG_X86_32_IRIS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
# CONFIG_LGUEST_GUEST is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=5
CONFIG_X86_L1_CACHE_SHIFT=5
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX32=y
CONFIG_TOSHIBA=m
CONFIG_I8K=y
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_MICROCODE_INTEL_EARLY=y
CONFIG_MICROCODE_AMD_EARLY=y
CONFIG_MICROCODE_EARLY=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_BOUNCE is not set
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CLEANCACHE=y
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
CONFIG_CMA_AREAS=7
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
CONFIG_ZSMALLOC=y
CONFIG_PGTABLE_MAPPING=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
CONFIG_DEBUG_HOTPLUG_CPU0=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_TEST_SUSPEND=y
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_PMIC_OPREGION is not set
CONFIG_SFI=y
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
CONFIG_APM_IGNORE_USER_SUSPEND=y
CONFIG_APM_DO_ENABLE=y
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_ALLOW_INTS=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_GX_SUSPMOD=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=y
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_GOBIOS=y
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_BIOS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=m
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=y
# CONFIG_EISA_PCI_EISA is not set
CONFIG_EISA_VIRTUAL_ROOT=y
# CONFIG_EISA_NAMES is not set
CONFIG_SCx200=m
CONFIG_SCx200HR_TIMER=m
CONFIG_ALIX=y
# CONFIG_NET5501 is not set
CONFIG_GEOS=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=m
# CONFIG_PCMCIA_LOAD_CIS is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
# CONFIG_I82092 is not set
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
CONFIG_HOTPLUG_PCI_IBM=y
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_RAPIDIO=y
# CONFIG_RAPIDIO_TSI721 is not set
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
CONFIG_RAPIDIO_DMA_ENGINE=y
# CONFIG_RAPIDIO_DEBUG is not set
CONFIG_RAPIDIO_ENUM_BASIC=m
#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_TSI57X=m
CONFIG_RAPIDIO_CPS_XX=m
# CONFIG_RAPIDIO_TSI568 is not set
CONFIG_RAPIDIO_CPS_GEN2=m
# CONFIG_X86_SYSFB is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y
#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
# CONFIG_NETFILTER_ADVANCED is not set
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_BRIDGE=m
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_VLAN_8021Q_MVRP is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=m
# CONFIG_IPX is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
# CONFIG_COPS is not set
# CONFIG_IPDDP is not set
# CONFIG_X25 is not set
CONFIG_LAPB=m
CONFIG_PHONET=m
CONFIG_IEEE802154=y
CONFIG_IEEE802154_SOCKET=y
CONFIG_MAC802154=y
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
# CONFIG_DNS_RESOLVER is not set
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_NC is not set
CONFIG_BATMAN_ADV_MCAST=y
CONFIG_VSOCKETS=y
# CONFIG_VMWARE_VMCI_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
CONFIG_NETLINK_DIAG=m
# CONFIG_NET_MPLS_GSO is not set
CONFIG_HSR=m
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
# CONFIG_BT_RFCOMM_TTY is not set
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_HIDP is not set
CONFIG_BT_LE=y
# CONFIG_BT_SELFTEST is not set
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUART=m
# CONFIG_BT_HCIUART_H4 is not set
# CONFIG_BT_HCIUART_BCSP is not set
# CONFIG_BT_HCIUART_ATH3K is not set
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
# CONFIG_BT_HCIDTL1 is not set
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_WILINK=m
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
# CONFIG_RFKILL is not set
CONFIG_RFKILL_REGULATOR=m
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y
CONFIG_CAIF_USB=m
CONFIG_NFC=y
# CONFIG_NFC_DIGITAL is not set
# CONFIG_NFC_NCI is not set
# CONFIG_NFC_HCI is not set
#
# Near Field Communication (NFC) devices
#
# CONFIG_NFC_SIM is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
# CONFIG_DMA_SHARED_BUFFER is not set
CONFIG_DMA_CMA=y
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_PERCENTAGE=10
# CONFIG_CMA_SIZE_SEL_MBYTES is not set
CONFIG_CMA_SIZE_SEL_PERCENTAGE=y
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
#
# Bus devices
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y
# CONFIG_ZRAM is not set
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
#
# DRBD disabled because PROC_FS or INET not selected
#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_NVME=y
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
CONFIG_BLK_DEV_HD=y
CONFIG_BLK_DEV_RSXX=y
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
# CONFIG_AD525X_DPOT_I2C is not set
CONFIG_DUMMY_IRQ=m
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
CONFIG_SGI_IOC4=y
CONFIG_TIFM_CORE=m
# CONFIG_TIFM_7XX1 is not set
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_CS5535_MFGPT=m
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
# CONFIG_CS5535_CLOCK_EVENT_SRC is not set
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=y
# CONFIG_ISL29003 is not set
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1780=m
CONFIG_SENSORS_BH1770=m
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
CONFIG_DS1682=m
# CONFIG_VMWARE_BALLOON is not set
CONFIG_BMP085=y
CONFIG_BMP085_I2C=y
CONFIG_PCH_PHUB=m
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=m
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=m
CONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_VMWARE_VMCI=y
#
# Intel MIC Bus Driver
#
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
CONFIG_ECHO=y
# CONFIG_CXL_BASE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
CONFIG_IDE_LEGACY=y
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_IDE_GD is not set
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_DELKIN=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_PROC_FS is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_OPTI621=y
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=y
CONFIG_BLK_DEV_AMD74XX=m
# CONFIG_BLK_DEV_ATIIXP is not set
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=y
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
CONFIG_BLK_DEV_CS5535=y
CONFIG_BLK_DEV_CS5536=y
# CONFIG_BLK_DEV_HPT366 is not set
CONFIG_BLK_DEV_JMICRON=y
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
CONFIG_BLK_DEV_IT8213=m
# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=y
# CONFIG_BLK_DEV_SIS5513 is not set
CONFIG_BLK_DEV_SLC90E66=m
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
#
# Other IDE chipsets support
#
#
# Note: most of these also require special kernel boot parameters
#
# CONFIG_BLK_DEV_4DRIVES is not set
CONFIG_BLK_DEV_ALI14XX=m
CONFIG_BLK_DEV_DTC2278=y
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_QD65XX is not set
# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_FIREWIRE_NOSY=m
# CONFIG_MACINTOSH_DRIVERS is not set
# CONFIG_NETDEVICES is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5520=m
CONFIG_KEYBOARD_ADP5588=y
CONFIG_KEYBOARD_ADP5589=m
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
CONFIG_KEYBOARD_QT2160=y
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_MATRIX=y
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_LM8333=m
# CONFIG_KEYBOARD_MAX7359 is not set
CONFIG_KEYBOARD_MCS=y
# CONFIG_KEYBOARD_MPR121 is not set
CONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_OPENCORES is not set
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_INPORT is not set
CONFIG_MOUSE_LOGIBM=y
CONFIG_MOUSE_PC110PAD=y
CONFIG_MOUSE_VSXXXAA=y
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
CONFIG_JOYSTICK_A3D=m
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
# CONFIG_JOYSTICK_GUILLEMOT is not set
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_AS5011 is not set
CONFIG_JOYSTICK_JOYDUMP=m
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=y
CONFIG_INPUT_AD714X=m
# CONFIG_INPUT_AD714X_I2C is not set
CONFIG_INPUT_BMA150=m
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MAX77693_HAPTIC is not set
CONFIG_INPUT_MAX8925_ONKEY=m
CONFIG_INPUT_MC13783_PWRBUTTON=m
CONFIG_INPUT_MMA8450=y
CONFIG_INPUT_MPU3050=y
CONFIG_INPUT_APANEL=y
CONFIG_INPUT_GP2A=m
# CONFIG_INPUT_GPIO_BEEPER is not set
CONFIG_INPUT_GPIO_TILT_POLLED=y
CONFIG_INPUT_WISTRON_BTNS=y
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
CONFIG_INPUT_KXTJ9=y
# CONFIG_INPUT_KXTJ9_POLLED_MODE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_REGULATOR_HAPTIC is not set
# CONFIG_INPUT_TPS65218_PWRBUTTON is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PALMAS_PWRBUTTON is not set
CONFIG_INPUT_PCF50633_PMU=m
CONFIG_INPUT_PCF8574=y
# CONFIG_INPUT_PWM_BEEPER is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
CONFIG_INPUT_DA9052_ONKEY=y
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_ADXL34X=m
# CONFIG_INPUT_ADXL34X_I2C is not set
CONFIG_INPUT_CMA3000=m
# CONFIG_INPUT_CMA3000_I2C is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
CONFIG_INPUT_SOC_BUTTON_ARRAY=m
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_SERIO_PS2MULT=m
CONFIG_SERIO_ARC_PS2=m
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
CONFIG_MOXA_SMARTIO=m
# CONFIG_SYNCLINK is not set
CONFIG_SYNCLINKMP=y
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=y
CONFIG_ISI=m
CONFIG_N_HDLC=m
# CONFIG_N_GSM is not set
CONFIG_TRACE_ROUTER=m
CONFIG_TRACE_SINK=y
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_FOURPORT is not set
CONFIG_SERIAL_8250_ACCENT=y
# CONFIG_SERIAL_8250_BOCA is not set
CONFIG_SERIAL_8250_EXAR_ST16C554=m
CONFIG_SERIAL_8250_HUB6=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_RSA is not set
CONFIG_SERIAL_8250_DW=m
# CONFIG_SERIAL_8250_FINTEK is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_SCCNXP=y
# CONFIG_SERIAL_SCCNXP_CONSOLE is not set
# CONFIG_SERIAL_SC16IS7XX is not set
CONFIG_SERIAL_TIMBERDALE=m
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS=y
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_PCH_UART=y
CONFIG_SERIAL_PCH_UART_CONSOLE=y
# CONFIG_SERIAL_ARC is not set
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=m
# CONFIG_SERIAL_MEN_Z135 is not set
# CONFIG_PRINTER is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_GEODE=m
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=m
CONFIG_DTLK=y
CONFIG_R3964=m
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_MWAVE=y
CONFIG_SCx200_GPIO=m
# CONFIG_PC8736x_GPIO is not set
CONFIG_NSC_GPIO=m
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_ISMT=m
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_NFORCE2_S4985 is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PCI=y
CONFIG_I2C_EG20T=m
CONFIG_I2C_GPIO=y
# CONFIG_I2C_KEMPLD is not set
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_XILINX=y
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_TAOS_EVM is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_I2C_CROS_EC_TUNNEL is not set
CONFIG_SCx200_ACB=y
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
# CONFIG_HSI_CHAR is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_ACPI=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_DA9052=y
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_IT8761E=m
# CONFIG_GPIO_F7188X is not set
CONFIG_GPIO_SCH311X=y
CONFIG_GPIO_SCH=y
# CONFIG_GPIO_ICH is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_LYNXPOINT is not set
#
# I2C GPIO expanders:
#
CONFIG_GPIO_ARIZONA=m
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=m
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_RC5T583=y
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_WM831X is not set
CONFIG_GPIO_WM8350=y
CONFIG_GPIO_ADP5520=m
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_INTEL_MID is not set
CONFIG_GPIO_PCH=y
CONFIG_GPIO_ML_IOH=m
CONFIG_GPIO_RDC321X=y
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set
#
# AC97 GPIO expanders:
#
#
# LPC GPIO expanders:
#
CONFIG_GPIO_KEMPLD=m
#
# MODULbus GPIO expanders:
#
# CONFIG_GPIO_PALMAS is not set
CONFIG_GPIO_TPS65910=y
#
# USB GPIO expanders:
#
CONFIG_W1=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=y
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
# CONFIG_W1_SLAVE_DS2413 is not set
# CONFIG_W1_SLAVE_DS2406 is not set
CONFIG_W1_SLAVE_DS2423=y
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=y
# CONFIG_W1_SLAVE_DS28E04 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
# CONFIG_MAX8925_POWER is not set
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=m
CONFIG_WM8350_POWER=m
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_88PM860X=m
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_SBS is not set
CONFIG_BATTERY_BQ27x00=m
CONFIG_BATTERY_BQ27X00_I2C=y
# CONFIG_BATTERY_BQ27X00_PLATFORM is not set
CONFIG_BATTERY_DA9030=m
CONFIG_BATTERY_DA9052=m
CONFIG_BATTERY_MAX17040=m
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_CHARGER_88PM860X=m
CONFIG_CHARGER_PCF50633=m
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_GPIO=m
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_MAX14577=m
# CONFIG_CHARGER_MAX77693 is not set
CONFIG_CHARGER_BQ2415X=m
# CONFIG_CHARGER_BQ24190 is not set
CONFIG_CHARGER_BQ24735=y
# CONFIG_CHARGER_SMB347 is not set
CONFIG_CHARGER_TPS65090=y
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7410=m
# CONFIG_SENSORS_ADT7411 is not set
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_K8TEMP=m
# CONFIG_SENSORS_K10TEMP is not set
CONFIG_SENSORS_FAM15H_POWER=y
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_DA9052_ADC=y
CONFIG_SENSORS_I5K_AMB=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_MC13783_ADC=m
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_HIH6130=m
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LTC2945=m
CONFIG_SENSORS_LTC4151=m
# CONFIG_SENSORS_LTC4215 is not set
CONFIG_SENSORS_LTC4222=m
# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_LTC4260=y
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=y
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
CONFIG_SENSORS_MAX6650=y
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_HTU21 is not set
CONFIG_SENSORS_MCP3021=y
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=y
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NTC_THERMISTOR=y
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=y
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
CONFIG_SENSORS_PCF8591=y
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC2978_REGULATOR is not set
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
# CONFIG_SENSORS_ZL6100 is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=m
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_SCH56XX_COMMON is not set
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS1015=m
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_VIA_CPUTEMP=y
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
CONFIG_SENSORS_W83795_FANCTRL=y
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_WM8350=y
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_GOV_STEP_WISE is not set
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
CONFIG_THERMAL_EMULATION=y
# CONFIG_INTEL_POWERCLAMP is not set
# CONFIG_INT340X_THERMAL is not set
#
# Texas Instruments thermal drivers
#
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=m
# CONFIG_MFD_AS3711 is not set
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X is not set
CONFIG_MFD_CROS_EC=y
# CONFIG_MFD_CROS_EC_I2C is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_I2C=y
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_I2C=m
# CONFIG_HTC_PASIC3 is not set
CONFIG_HTC_I2CPLD=y
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=m
# CONFIG_MFD_88PM800 is not set
CONFIG_MFD_88PM805=m
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX8907 is not set
CONFIG_MFD_MAX8925=y
# CONFIG_MFD_MAX8997 is not set
CONFIG_MFD_MAX8998=y
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_RETU is not set
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
CONFIG_MFD_RDC321X=y
CONFIG_MFD_RTSX_PCI=y
# CONFIG_MFD_RT5033 is not set
CONFIG_MFD_RC5T583=y
# CONFIG_MFD_RN5T618 is not set
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SMSC=y
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
# CONFIG_AB3100_OTP is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=m
# CONFIG_MFD_LP3943 is not set
CONFIG_MFD_LP8788=y
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=m
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
# CONFIG_MFD_TPS65912_I2C is not set
CONFIG_MFD_TPS80031=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=m
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
# CONFIG_MFD_WM5102 is not set
# CONFIG_MFD_WM5110 is not set
# CONFIG_MFD_WM8997 is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_WM8994 is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=m
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_88PM8607 is not set
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_AD5398=y
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_AAT2870=y
# CONFIG_REGULATOR_AB3100 is not set
CONFIG_REGULATOR_DA903X=y
# CONFIG_REGULATOR_DA9052 is not set
CONFIG_REGULATOR_DA9210=m
# CONFIG_REGULATOR_DA9211 is not set
CONFIG_REGULATOR_FAN53555=y
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL9305 is not set
CONFIG_REGULATOR_ISL6271A=m
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_LP8788=y
# CONFIG_REGULATOR_LTC3589 is not set
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=m
# CONFIG_REGULATOR_MAX8925 is not set
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_MAX8973=m
# CONFIG_REGULATOR_MAX8998 is not set
CONFIG_REGULATOR_MAX77693=y
# CONFIG_REGULATOR_MC13783 is not set
# CONFIG_REGULATOR_MC13892 is not set
CONFIG_REGULATOR_PALMAS=m
CONFIG_REGULATOR_PCF50633=m
CONFIG_REGULATOR_PFUZE100=y
# CONFIG_REGULATOR_PWM is not set
CONFIG_REGULATOR_RC5T583=y
CONFIG_REGULATOR_S2MPA01=m
CONFIG_REGULATOR_S2MPS11=m
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS51632=y
# CONFIG_REGULATOR_TPS6105X is not set
CONFIG_REGULATOR_TPS62360=m
CONFIG_REGULATOR_TPS65023=y
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_REGULATOR_TPS65090=m
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TPS80031=m
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8400=m
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=m
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=m
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=y
CONFIG_AGP_EFFICEON=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
#
# Direct Rendering Manager
#
# CONFIG_DRM is not set
#
# Frame buffer Devices
#
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_VGASTATE is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_MDA_CONSOLE=m
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_SOUND=m
# CONFIG_SOUND_OSS_CORE is not set
# CONFIG_SND is not set
# CONFIG_SOUND_PRIME is not set
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set
CONFIG_UHID=y
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=y
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=y
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not set
CONFIG_HID_WALTOP=m
# CONFIG_HID_GYRATION is not set
CONFIG_HID_ICADE=y
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
# CONFIG_HID_LOGITECH_HIDPP is not set
# CONFIG_LOGITECH_FF is not set
CONFIG_LOGIRUMBLEPAD2_FF=y
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_ORTEK=m
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PRIMAX=m
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEELSERIES=m
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=y
CONFIG_HID_THINGM=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=y
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=y
# CONFIG_HID_SENSOR_HUB is not set
#
# I2C HID support
#
CONFIG_I2C_HID=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
#
# USB port drivers
#
#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_GADGET is not set
CONFIG_UWB=y
# CONFIG_UWB_WHCI is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=m
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
CONFIG_MS_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
# CONFIG_MEMSTICK_JMICRON_38X is not set
# CONFIG_MEMSTICK_R592 is not set
# CONFIG_MEMSTICK_REALTEK_PCI is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3533 is not set
CONFIG_LEDS_LM3642=m
CONFIG_LEDS_NET48XX=m
CONFIG_LEDS_WRAP=m
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=m
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=m
CONFIG_LEDS_LP8501=m
# CONFIG_LEDS_LP8788 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM831X_STATUS=y
# CONFIG_LEDS_WM8350 is not set
# CONFIG_LEDS_DA903X is not set
# CONFIG_LEDS_DA9052 is not set
CONFIG_LEDS_PWM=m
CONFIG_LEDS_REGULATOR=m
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_ADP5520=m
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_LM355x=y
CONFIG_LEDS_OT200=y
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_MM_EDAC=m
# CONFIG_EDAC_AMD76X is not set
CONFIG_EDAC_E7XXX=m
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82975X is not set
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
# CONFIG_EDAC_IE31200 is not set
CONFIG_EDAC_X38=m
# CONFIG_EDAC_I5400 is not set
CONFIG_EDAC_I82860=m
# CONFIG_EDAC_R82600 is not set
CONFIG_EDAC_I5000=m
# CONFIG_EDAC_I5100 is not set
CONFIG_EDAC_I7300=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_SYSTOHC is not set
CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_88PM860X is not set
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_DS1307 is not set
CONFIG_RTC_DRV_DS1374=y
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_LP8788=m
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_MAX8925=y
CONFIG_RTC_DRV_MAX8998=m
CONFIG_RTC_DRV_RS5C372=y
# CONFIG_RTC_DRV_ISL1208 is not set
CONFIG_RTC_DRV_ISL12022=m
# CONFIG_RTC_DRV_ISL12057 is not set
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PALMAS=y
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF85063 is not set
CONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_TPS65910=m
CONFIG_RTC_DRV_TPS80031=y
CONFIG_RTC_DRV_RC5T583=y
CONFIG_RTC_DRV_S35390A=m
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
CONFIG_RTC_DRV_RV3029C2=y
CONFIG_RTC_DRV_S5M=y
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1286=y
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_DS2404 is not set
CONFIG_RTC_DRV_DA9052=m
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=y
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=m
CONFIG_RTC_DRV_WM831X=m
CONFIG_RTC_DRV_WM8350=m
CONFIG_RTC_DRV_PCF50633=m
CONFIG_RTC_DRV_AB3100=m
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_MC13XXX=m
# CONFIG_RTC_DRV_XGENE is not set
#
# HID Sensor RTC drivers
#
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
CONFIG_DW_DMAC_CORE=y
# CONFIG_DW_DMAC is not set
CONFIG_DW_DMAC_PCI=y
CONFIG_PCH_DMA=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ACPI=y
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_THINKPAD_ACPI is not set
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
CONFIG_IBM_RTL=m
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_PVPANIC is not set
# CONFIG_CHROME_PLATFORMS is not set
#
# Hardware Spinlock drivers
#
#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers
#
#
# SOC (System On Chip) specific Drivers
#
# CONFIG_SOC_TI is not set
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_GPIO=m
CONFIG_EXTCON_MAX14577=m
# CONFIG_EXTCON_MAX77693 is not set
# CONFIG_EXTCON_PALMAS is not set
# CONFIG_EXTCON_RT8973A is not set
# CONFIG_EXTCON_SM5502 is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_LPSS is not set
CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=y
CONFIG_SERIAL_IPOCTAL=y
CONFIG_RESET_CONTROLLER=y
CONFIG_FMC=y
# CONFIG_FMC_FAKEDEV is not set
CONFIG_FMC_TRIVIAL=m
# CONFIG_FMC_WRITE_EEPROM is not set
# CONFIG_FMC_CHARDEV is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_POWERCAP=y
CONFIG_MCB=m
# CONFIG_MCB_PCI is not set
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set
#
# Android
#
# CONFIG_ANDROID is not set
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=y
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4_USE_FOR_EXT23 is not set
# CONFIG_EXT4_FS_POSIX_ACL is not set
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=y
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_OCFS2_DEBUG_FS=y
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y
CONFIG_BTRFS_DEBUG=y
# CONFIG_BTRFS_ASSERT is not set
CONFIG_NILFS2_FS=m
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
CONFIG_FSCACHE=m
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
# CONFIG_CACHEFILES is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
CONFIG_NTFS_DEBUG=y
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=m
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=m
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=m
# CONFIG_NLS_MAC_INUIT is not set
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
# CONFIG_DEBUG_OBJECTS_FREE is not set
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_VMACACHE is not set
CONFIG_DEBUG_VM_RB=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_TIMER_STATS=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_KOBJECT_RELEASE is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
# CONFIG_PROVE_RCU_REPEATEDLY is not set
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_CPU_STALL_INFO=y
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
# CONFIG_FAIL_PAGE_ALLOC is not set
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_LATENCYTOP=y
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
#
# Runtime Testing
#
# CONFIG_TEST_LIST_SORT is not set
CONFIG_KPROBES_SANITY_TEST=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_RHASHTABLE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_BUILD_DOCSRC=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
CONFIG_TEST_USER_COPY=m
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_GLUE_HELPER_X86=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
# CONFIG_CRYPTO_HMAC is not set
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_586=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_LZ4=y
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_DRBG_MENU is not set
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
# CONFIG_CRYPTO_USER_API_RNG is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_CRYPTO_DEV_GEODE=y
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
# CONFIG_CRYPTO_DEV_CCP_CRYPTO is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS7_MESSAGE_PARSER is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
CONFIG_CRC32_SARWATE=y
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_AVERAGE is not set
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
CONFIG_DDR=y
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_ARCH_HAS_SG_CHAIN=y
[-- Attachment #3: dmesg.ksh --]
[-- Type: text/plain, Size: 46161 bytes --]
early console in setup code
Probing EDD (edd=off to disable)... ok
early console in decompress_kernel
Decompressing Linux... Parsing ELF... No relocation needed... done.
Booting the kernel.
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 4.0.0-02646-ge2ac55b (kbuild@lkp-ib03) (gcc version 4.9.2 (Debian 4.9.2-10) ) #15 SMP Sat Apr 18 20:13:55 CST 2015
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000167dffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000167e0000-0x00000000167fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x167e0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask FF80000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000f0ed0-0x000f0edf] mapped at [c00f0ed0]
[ 0.000000] mpc: f0ee0-f0fb0
[ 0.000000] initial memory mapped: [mem 0x00000000-0x029fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x14a00000-0x14bfffff]
[ 0.000000] [mem 0x14a00000-0x14bfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x149fffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x149fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x14c00000-0x167dffff]
[ 0.000000] [mem 0x14c00000-0x165fffff] page 2M
[ 0.000000] [mem 0x16600000-0x167dffff] page 4k
[ 0.000000] BRK [0x024ef000, 0x024effff] PGTABLE
[ 0.000000] BRK [0x024f0000, 0x024f0fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x14c57000-0x167d7fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000F0CF0 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x167E1854 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0x167E0B37 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x167E0040 000AF7 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACS 0x167E0000 000040
[ 0.000000] ACPI: SSDT 0x167E0BAB 000BF9 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0x167E17A4 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0x167E181C 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffb000 ( fee00000)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 359MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 167e0000
[ 0.000000] low ram: 0 - 167e0000
[ 0.000000] cma: dma_contiguous_reserve(limit 167e0000)
[ 0.000000] cma: dma_contiguous_reserve: reserving 35 MiB for global area
[ 0.000000] cma: cma_declare_contiguous(size 0x00000000023f3000, base 0x0000000000000000, limit 0x00000000167e0000 alignment 0x0000000000000000)
[ 0.000000] cma: Reserved 36 MiB at 0x0000000012800000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:167df001, primary cpu clock
[ 0.000000] clocksource kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000167dffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000167dffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000167dffff]
[ 0.000000] On node 0 totalpages: 92030
[ 0.000000] free_area_init_node: node 0, pgdat c19eb9a0, node_mem_map d2530020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 688 pages used for memmap
[ 0.000000] Normal zone: 88032 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffb000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] e820: [mem 0x16800000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 336 pages/cpu @d23e0000 s1346816 r0 d29440 u1376256
[ 0.000000] pcpu-alloc: s1346816 r0 d29440 u1376256 alloc=336*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 123e3840
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 91310
[ 0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-i386-23/rand_boot-1-quantal-core-i386.cgz-i386-randconfig-ib0-04172352-e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6-1-20150418-31554-1woqtdb.yaml ARCH=i386 kconfig=i386-randconfig-ib0-04172352 branch=linus/master commit=e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6 BOOT_IMAGE=/kernel/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/vmlinuz-4.0.0-02646-ge2ac55b RESULT_ROOT=/result/vm-vp-quantal-i386/boot/1/quantal-core-i386.cgz/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-i386-23::dhcp drbd.minor_count=8
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 276904K/368120K available (7195K kernel code, 472K rwdata, 2512K rodata, 1836K init, 9296K bss, 54352K reserved, 36864K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffe6e000 - 0xfffff000 (1604 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xd6fe0000 - 0xffbfe000 ( 652 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd67e0000 ( 359 MB)
[ 0.000000] .init : 0xc19f4000 - 0xc1bbf000 (1836 kB)
[ 0.000000] .data : 0xc17071ca - 0xc19f20a0 (2987 kB)
[ 0.000000] .text : 0xc1000000 - 0xc17071ca (7196 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] Running RCU self tests
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=d1c08000 soft=d1c0a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] bootconsole [earlyser0] disabled
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 4.0.0-02646-ge2ac55b (kbuild@lkp-ib03) (gcc version 4.9.2 (Debian 4.9.2-10) ) #15 SMP Sat Apr 18 20:13:55 CST 2015
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000167dffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000167e0000-0x00000000167fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x167e0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask FF80000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000f0ed0-0x000f0edf] mapped at [c00f0ed0]
[ 0.000000] mpc: f0ee0-f0fb0
[ 0.000000] initial memory mapped: [mem 0x00000000-0x029fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x14a00000-0x14bfffff]
[ 0.000000] [mem 0x14a00000-0x14bfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x149fffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x149fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x14c00000-0x167dffff]
[ 0.000000] [mem 0x14c00000-0x165fffff] page 2M
[ 0.000000] [mem 0x16600000-0x167dffff] page 4k
[ 0.000000] BRK [0x024ef000, 0x024effff] PGTABLE
[ 0.000000] BRK [0x024f0000, 0x024f0fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x14c57000-0x167d7fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000F0CF0 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x167E1854 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0x167E0B37 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x167E0040 000AF7 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACS 0x167E0000 000040
[ 0.000000] ACPI: SSDT 0x167E0BAB 000BF9 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0x167E17A4 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0x167E181C 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffb000 ( fee00000)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 359MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 167e0000
[ 0.000000] low ram: 0 - 167e0000
[ 0.000000] cma: dma_contiguous_reserve(limit 167e0000)
[ 0.000000] cma: dma_contiguous_reserve: reserving 35 MiB for global area
[ 0.000000] cma: cma_declare_contiguous(size 0x00000000023f3000, base 0x0000000000000000, limit 0x00000000167e0000 alignment 0x0000000000000000)
[ 0.000000] cma: Reserved 36 MiB at 0x0000000012800000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:167df001, primary cpu clock
[ 0.000000] clocksource kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000167dffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000167dffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000167dffff]
[ 0.000000] On node 0 totalpages: 92030
[ 0.000000] free_area_init_node: node 0, pgdat c19eb9a0, node_mem_map d2530020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 688 pages used for memmap
[ 0.000000] Normal zone: 88032 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffb000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] e820: [mem 0x16800000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 336 pages/cpu @d23e0000 s1346816 r0 d29440 u1376256
[ 0.000000] pcpu-alloc: s1346816 r0 d29440 u1376256 alloc=336*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 123e3840
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 91310
[ 0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-i386-23/rand_boot-1-quantal-core-i386.cgz-i386-randconfig-ib0-04172352-e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6-1-20150418-31554-1woqtdb.yaml ARCH=i386 kconfig=i386-randconfig-ib0-04172352 branch=linus/master commit=e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6 BOOT_IMAGE=/kernel/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/vmlinuz-4.0.0-02646-ge2ac55b RESULT_ROOT=/result/vm-vp-quantal-i386/boot/1/quantal-core-i386.cgz/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-i386-23::dhcp drbd.minor_count=8
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 276904K/368120K available (7195K kernel code, 472K rwdata, 2512K rodata, 1836K init, 9296K bss, 54352K reserved, 36864K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffe6e000 - 0xfffff000 (1604 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xd6fe0000 - 0xffbfe000 ( 652 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd67e0000 ( 359 MB)
[ 0.000000] .init : 0xc19f4000 - 0xc1bbf000 (1836 kB)
[ 0.000000] .data : 0xc17071ca - 0xc19f20a0 (2987 kB)
[ 0.000000] .text : 0xc1000000 - 0xc17071ca (7196 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] Running RCU self tests
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=d1c08000 soft=d1c0a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] bootconsole [earlyser0] disabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.000000] ... CHAINHASH_SIZE: 32768
[ 0.000000] memory used by lock dependency info: 5167 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2693.508 MHz processor
[ 0.003000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=2693508)
[ 0.003004] pid_max: default: 32768 minimum: 301
[ 0.004018] ACPI: Core revision 20150204
[ 0.006632] ACPI: All ACPI Tables successfully acquired
[ 0.007263] Security Framework initialized
[ 0.008025] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.008821] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.010258] Initializing cgroup subsys blkio
[ 0.010838] Initializing cgroup subsys devices
[ 0.011016] Initializing cgroup subsys freezer
[ 0.012016] Initializing cgroup subsys net_cls
[ 0.012613] Initializing cgroup subsys perf_event
[ 0.013094] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.014003] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.024346] Freeing SMP alternatives memory: 24K (c1bbf000 - c1bc5000)
[ 0.028944] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.029056] enabled ExtINT on CPU#0
[ 0.030709] ENABLING IO-APIC IRQs
[ 0.031017] init IO_APIC IRQs
[ 0.031470] apic 0 pin 0 not connected
[ 0.032038] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.033032] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.034024] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.035020] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.036020] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.037019] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[ 0.038020] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.039019] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.040019] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.041019] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.042021] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[ 0.043020] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[ 0.044020] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.045020] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[ 0.046020] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[ 0.047024] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[ 0.048017] apic 0 pin 16 not connected
[ 0.049002] apic 0 pin 17 not connected
[ 0.049545] apic 0 pin 18 not connected
[ 0.050002] apic 0 pin 19 not connected
[ 0.050541] apic 0 pin 20 not connected
[ 0.051002] apic 0 pin 21 not connected
[ 0.051540] apic 0 pin 22 not connected
[ 0.052002] apic 0 pin 23 not connected
[ 0.052676] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053028] TSC deadline timer enabled
[ 0.053550] smpboot: CPU0: Intel Core Processor (Haswell) (fam: 06, model: 3c, stepping: 01)
[ 0.054026] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only.
[ 0.055662] x86: Booted up 1 node, 1 CPUs
[ 0.056008] smpboot: Total of 1 processors activated (5387.01 BogoMIPS)
[ 0.057614] devtmpfs: initialized
[ 0.059022] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.060240] xor: automatically using best checksumming function:
[ 0.070004] avx : 29496.000 MB/sec
[ 0.070908] regulator-dummy: no parameters
[ 0.071354] NET: Registered protocol family 16
[ 0.072475] EISA bus registered
[ 0.072951] cpuidle: using governor ladder
[ 0.073008] cpuidle: using governor menu
[ 0.073811] ACPI: bus type PCI registered
[ 0.074194] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.075006] PCI: PCI BIOS revision 2.10 entry at 0xfd456, last bus=0
[ 0.096009] raid6: mmxx1 5250 MB/s
[ 0.113012] raid6: mmxx2 5679 MB/s
[ 0.130013] raid6: sse1x1 4429 MB/s
[ 0.147009] raid6: sse1x2 5480 MB/s
[ 0.164009] raid6: sse2x1 8082 MB/s
[ 0.181005] raid6: sse2x2 9949 MB/s
[ 0.181526] raid6: using algorithm sse2x2 (9949 MB/s)
[ 0.182005] raid6: using ssse3x1 recovery algorithm
[ 0.182802] ACPI: Added _OSI(Module Device)
[ 0.183005] ACPI: Added _OSI(Processor Device)
[ 0.183587] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.184005] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.186440] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.189875] ACPI: Interpreter enabled
[ 0.190012] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.191006] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.192031] ACPI: (supports S0 S3 S5)
[ 0.192534] ACPI: Using IOAPIC for interrupt routing
[ 0.193037] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.201666] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.202011] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.202839] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.203274] PCI host bridge to bus 0000:00
[ 0.203830] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.204006] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.204792] pci_bus 0000:00: root bus resource [io 0x0d00-0xadff window]
[ 0.205005] pci_bus 0000:00: root bus resource [io 0xae0f-0xaeff window]
[ 0.205787] pci_bus 0000:00: root bus resource [io 0xaf20-0xafdf window]
[ 0.206005] pci_bus 0000:00: root bus resource [io 0xafe4-0xffff window]
[ 0.206786] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.207005] pci_bus 0000:00: root bus resource [mem 0x16800000-0xfebfffff window]
[ 0.208030] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.209321] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.210545] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.213008] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f]
[ 0.214410] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.215005] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.215771] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.216005] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.217069] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.218072] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.219014] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.220161] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[ 0.221410] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[ 0.222812] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff]
[ 0.226394] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[ 0.227311] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 0.228739] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[ 0.229699] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f]
[ 0.233400] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[ 0.234318] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[ 0.235402] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[ 0.238437] pci_bus 0000:00: on NUMA node 0
[ 0.239647] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.240632] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.241614] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.242616] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.243554] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.244805] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 0.245720] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.246000] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.246007] vgaarb: loaded
[ 0.246428] vgaarb: bridge control possible 0000:00:02.0
[ 0.247494] PCI: Using ACPI for IRQ routing
[ 0.248005] PCI: pci_cache_line_size set to 64 bytes
[ 0.248742] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.249021] e820: reserve RAM buffer [mem 0x167e0000-0x17ffffff]
[ 0.250267] nfc: nfc_init: NFC Core ver 0.1
[ 0.250884] NET: Registered protocol family 39
[ 0.251254] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.252263] Switched to clocksource kvm-clock
[ 0.253000] pnp: PnP ACPI init
[ 0.253402] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.254510] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.255338] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.256448] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.257257] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.258368] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.268746] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.269788] pnp 00:03: [dma 2]
[ 0.270297] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.271131] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.272211] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.273047] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.274131] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.275311] pnp: PnP ACPI: found 6 devices
[ 0.315045] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.316153] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.316892] pci_bus 0000:00: resource 5 [io 0x0d00-0xadff window]
[ 0.317628] pci_bus 0000:00: resource 6 [io 0xae0f-0xaeff window]
[ 0.318371] pci_bus 0000:00: resource 7 [io 0xaf20-0xafdf window]
[ 0.319109] pci_bus 0000:00: resource 8 [io 0xafe4-0xffff window]
[ 0.319848] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window]
[ 0.320675] pci_bus 0000:00: resource 10 [mem 0x16800000-0xfebfffff window]
[ 0.321522] NET: Registered protocol family 1
[ 0.322115] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.322829] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.323543] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.324302] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.325018] PCI: CLS 0 bytes, default 64
[ 0.325768] Trying to unpack rootfs image as initramfs...
[ 1.196233] Freeing initrd memory: 28164K (d4c57000 - d67d8000)
[ 1.203629] microcode: CPU0 sig=0x306c1, pf=0x1, revision=0x1
[ 1.204567] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.205899] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 1.206660] apm: overridden by ACPI.
[ 1.207571] cryptomgr_test (21) used greatest stack depth: 7028 bytes left
[ 1.209424] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 1.210224] Initialise system trusted keyring
[ 1.210908] Kprobe smoke test: started
[ 1.217850] Kprobe smoke test: passed successfully
[ 1.218914] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.225136] VFS: Disk quotas dquot_6.5.2
[ 1.225814] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.228207] (swapper/0,1,0):ocfs2_init:1612 ERROR: Unable to create ocfs2 debugfs root.
[ 1.232445] (swapper/0,1,0):ocfs2_init:1634 ERROR: status = -19
[ 1.233223] ocfs2: Registered cluster interface o2cb
[ 1.233994] OCFS2 User DLM kernel interface loaded
[ 1.234618] (swapper/0,1,0):o2hb_debug_init:1318 ERROR: status = -19
[ 1.236183] gfs2: GFS2 installed
[ 1.238123] Key type asymmetric registered
[ 1.238687] Asymmetric key parser 'x509' registered
[ 1.239438] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1.240485] io scheduler noop registered (default)
[ 1.241119] start plist test
[ 1.243840] end plist test
[ 1.244504] xz_dec_test: module loaded
[ 1.245044] xz_dec_test: Create a device node with 'mknod xz_dec_test c 253 0' and write .xz files to it.
[ 1.246527] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.247266] ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6
[ 1.248294] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.249309] ACPI: Power Button [PWRF]
[ 1.279461] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.305227] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.315164] Initializing Nozomi driver 2.1d
[ 1.315762] SyncLink MultiPort driver $Revision: 4.38 $
[ 1.323995] SyncLink MultiPort driver $Revision: 4.38 $, tty major#249
[ 1.325018] DoubleTalk PC - not found
[ 1.325574] smapi::smapi_init, ERROR invalid usSmapiID
[ 1.326250] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[ 1.327424] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[ 1.328404] mwave: mwavedd::mwave_init: Error: Failed to initialize
[ 1.329196] Linux agpgart interface v0.103
[ 1.330528] Floppy drive(s): fd0 is 1.44M
[ 1.335704] brd: module loaded
[ 1.336337] MM: desc_per_page = 128
[ 1.336886] mtip32xx Version 1.3.1
[ 1.337394] Error creating debugfs parent
[ 1.338211] Guest personality initialized and is inactive
[ 1.338988] VMCI host device registered (name=vmci, major=10, minor=62)
[ 1.339787] Initialized host personality
[ 1.340609] Uniform Multi-Platform E-IDE driver
[ 1.341362] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[ 1.342333] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[ 1.343538] ide0: BM-DMA at 0xc040-0xc047
[ 1.344150] ide1: BM-DMA at 0xc048-0xc04f
[ 1.344729] Probing IDE interface ide0...
[ 1.354662] FDC 0 is a S82078B
[ 1.864216] Probing IDE interface ide1...
[ 2.200141] tsc: Refined TSC clocksource calibration: 2693.506 MHz
[ 2.200896] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x26d347b2dd9, max_idle_ns: 440795223616 ns
[ 2.536108] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[ 3.149195] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0
[ 3.150218] hdc: MWDMA2 mode selected
[ 3.150902] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.151655] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.153206] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 3.154612] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 3.156468] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.157196] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.159168] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 3.160902] logibm.c: Didn't find Logitech busmouse at 0x23c
[ 3.162051] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[ 3.162927] wistron_btns: System unknown
[ 3.164105] Driver for 1-wire Dallas network protocol.
[ 3.165995] platform eisa.0: Probing EISA bus 0
[ 3.166623] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 3.167463] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 3.168269] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 3.169069] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 3.169850] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 3.170652] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 3.171462] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 3.172275] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 3.173090] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 3.173874] platform eisa.0: EISA: Detected 0 cards
[ 3.174776] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 3.176701] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[ 3.177957] DECnet: Routing cache hash table of 512 buckets, 22Kbytes
[ 3.178814] NET: Registered protocol family 12
[ 3.179449] 8021q: 802.1Q VLAN Support v1.8
[ 3.180130] NET: Registered protocol family 37
[ 3.180753] NET: Registered protocol family 36
[ 3.181636] ... APIC ID: 00000000 (0)
[ 3.182219] ... APIC VERSION: 01050014
[ 3.182366] 0000000000000000000000000000000000000000000000000000000000000000
[ 3.182366] 000000000e200000000000000000000000000000000000000000000000000000
[ 3.182366] 0000000000000000000000000000000000000000000000000000000000008000
[ 3.182366]
[ 3.187099] number of MP IRQ sources: 15.
[ 3.187653] number of IO-APIC #0 registers: 24.
[ 3.188282] testing the IO APIC.......................
[ 3.188957] IO APIC #0......
[ 3.189427] .... register #00: 00000000
[ 3.189973] ....... : physical APIC id: 00
[ 3.190579] ....... : Delivery Type: 0
[ 3.191154] ....... : LTS : 0
[ 3.191700] .... register #01: 00170011
[ 3.192261] ....... : max redirection entries: 17
[ 3.192914] ....... : PRQ implemented: 0
[ 3.193507] ....... : IO APIC version: 11
[ 3.194116] .... register #02: 00000000
[ 3.194649] ....... : arbitration: 00
[ 3.195227] .... IRQ redirection table:
[ 3.195767] 1 0 0 0 0 0 0 00
[ 3.196402] 0 0 0 0 0 1 1 31
[ 3.197109] 0 0 0 0 0 1 1 30
[ 3.198134] 0 0 0 0 0 1 1 33
[ 3.199188] 1 0 0 0 0 1 1 34
[ 3.200247] 1 1 0 0 0 1 1 35
[ 3.201293] 0 0 0 0 0 1 1 36
[ 3.202360] 0 0 0 0 0 1 1 37
[ 3.203406] 0 0 0 0 0 1 1 38
[ 3.204452] 0 1 0 0 0 1 1 39
[ 3.205517] 1 1 0 0 0 1 1 3A
[ 3.206568] 1 1 0 0 0 1 1 3B
[ 3.207610] 0 0 0 0 0 1 1 3C
[ 3.208670] 0 0 0 0 0 1 1 3D
[ 3.209730] 0 0 0 0 0 1 1 3E
[ 3.210796] 0 0 0 0 0 1 1 3F
[ 3.211855] 1 0 0 0 0 0 0 00
[ 3.212906] 1 0 0 0 0 0 0 00
[ 3.213952] 1 0 0 0 0 0 0 00
[ 3.214999] 1 0 0 0 0 0 0 00
[ 3.216032] 1 0 0 0 0 0 0 00
[ 3.217067] 1 0 0 0 0 0 0 00
[ 3.218104] 1 0 0 0 0 0 0 00
[ 3.219155] 1 0 0 0 0 0 0 00
[ 3.220184] IRQ to pin mappings:
[ 3.220998] IRQ0 -> 0:2
[ 3.238836] IRQ1 -> 0:1
[ 3.239726] IRQ3 -> 0:3
[ 3.240608] IRQ4 -> 0:4
[ 3.241499] IRQ5 -> 0:5
[ 3.242399] IRQ6 -> 0:6
[ 3.243300] IRQ7 -> 0:7
[ 3.244190] IRQ8 -> 0:8
[ 3.245078] IRQ9 -> 0:9
[ 3.245951] IRQ10 -> 0:10
[ 3.246905] IRQ11 -> 0:11
[ 3.247514] IRQ12 -> 0:12
[ 3.248084] IRQ13 -> 0:13
[ 3.248615] IRQ14 -> 0:14
[ 3.249174] IRQ15 -> 0:15
[ 3.249705] .................................... done.
[ 3.250589] Using IPI No-Shortcut mode
[ 3.251516] Loading compiled-in X.509 certificates
[ 3.254874] Loaded X.509 cert 'Magrathea: Glacier signing key: e428e5604eb6dea2e9f39cf6ede8a52264f1b045'
[ 3.256155] registered taskstats version 1
[ 3.258165] Btrfs loaded, debug=on
[ 3.258761] BTRFS: selftest: Running btrfs free space cache tests
[ 3.259569] BTRFS: selftest: Running extent only tests
[ 3.260307] BTRFS: selftest: Running bitmap only tests
[ 3.261028] BTRFS: selftest: Running bitmap and extent tests
[ 3.261749] BTRFS: selftest: Running space stealing from bitmap to extent
[ 3.262834] BTRFS: selftest: Free space cache tests finished
[ 3.263646] BTRFS: selftest: Running extent buffer operation tests
[ 3.264312] BTRFS: selftest: Running btrfs_split_item tests
[ 3.265270] BTRFS: selftest: Running find delalloc tests
[ 302.048196] kworker/dying (69) used greatest stack depth: 6752 bytes left
BUG: kernel boot hang
Elapsed time: 310
qemu-system-i386 -enable-kvm -cpu Haswell,+smep,+smap -kernel /kernel/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/vmlinuz-4.0.0-02646-ge2ac55b -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-i386-23/rand_boot-1-quantal-core-i386.cgz-i386-randconfig-ib0-04172352-e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6-1-20150418-31554-1woqtdb.yaml ARCH=i386 kconfig=i386-randconfig-ib0-04172352 branch=linus/master commit=e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6 BOOT_IMAGE=/kernel/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/vmlinuz-4.0.0-02646-ge2ac55b RESULT_ROOT=/result/vm-vp-quantal-i386/boot/1/quantal-core-i386.cgz/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-i386-23::dhcp drbd.minor_count=8' -initrd /fs/sde1/initrd-vm-vp-quantal-i386-23 -m 360 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-vm-vp-quantal-i386-23 -serial file:/dev/shm/kboot/serial-vm-vp-quantal-i386-23 -daemonize -display none -monitor null
\r
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [LKP] [ocfs2] e2ac55b6a8e: ocfs2_init:1612 ERROR: Unable to create ocfs2 debugfs root
2015-04-20 3:25 ` Huang Ying
(?)
@ 2015-04-20 3:45 ` Chengyu Song
2015-04-20 4:32 ` Huang Ying
2015-04-20 20:50 ` Linus Torvalds
-1 siblings, 2 replies; 11+ messages in thread
From: Chengyu Song @ 2015-04-20 3:45 UTC (permalink / raw)
To: Huang Ying; +Cc: Linus Torvalds, LKML, LKP ML
Hi Ying,
As suggested in the patch, -19 (-ENODEV) happens when debugfs is not configured (see include/linux/debugfs.h). So if debugfs is necessary for the functionality, in Kconfig, we should either declare it as a dependency, or auto select it.
Chengyu
> On Apr 19, 2015, at 11:25 PM, Huang Ying <ying.huang@intel.com> wrote:
>
> FYI, we noticed the below changes on
>
> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> commit e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6 ("ocfs2: incorrect check for debugfs returns")
>
> We found something as below in dmesg.
>
> [ 1.225136] VFS: Disk quotas dquot_6.5.2
> [ 1.225814] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 1.228207] (swapper/0,1,0):ocfs2_init:1612 ERROR: Unable to create ocfs2 debugfs root.
> [ 1.232445] (swapper/0,1,0):ocfs2_init:1634 ERROR: status = -19
> [ 1.233223] ocfs2: Registered cluster interface o2cb
> [ 1.233994] OCFS2 User DLM kernel interface loaded
> [ 1.234618] (swapper/0,1,0):o2hb_debug_init:1318 ERROR: status = -19
> [ 1.236183] gfs2: GFS2 installed
> [ 1.238123] Key type asymmetric registered
>
> BUG: kernel boot hang
> Elapsed time: 310
> qemu-system-i386 -enable-kvm -cpu Haswell,+smep,+smap -kernel /kernel/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/vmlinuz-4.0.0-02646-ge2ac55b -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-i386-23/rand_boot-1-quantal-core-i386.cgz-i386-randconfig-ib0-04172352-e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6-1-20150418-31554-1woqtdb.yaml ARCH=i386 kconfig=i386-randconfig-ib0-04172352 branch=linus/master commit=e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6 BOOT_IMAGE=/kernel/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/vmlinuz-4.0.0-02646-ge2ac55b RESULT_ROOT=/result/vm-vp-quantal-i386/boot/1/quantal-core-i386.cgz/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-i386-23::dhcp drbd.minor_count=8' -initrd /fs/sde1/initrd-vm-vp-quantal-i386-23 -m 360 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-vm-vp-quantal-i386-23 -serial file:/dev/shm/kboot/serial-vm-vp-quantal-i386-23 -daemonize -display none -monitor null
>
> Thanks,
> Ying Huang
>
> <config-4.0.0-02646-ge2ac55b><.dmesg.txt>_______________________________________________
> LKP mailing list
> LKP@linux.intel.com
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [LKP] [ocfs2] e2ac55b6a8e: ocfs2_init:1612 ERROR: Unable to create ocfs2 debugfs root
2015-04-20 3:45 ` [LKP] " Chengyu Song
@ 2015-04-20 4:32 ` Huang Ying
2015-04-20 20:50 ` Linus Torvalds
1 sibling, 0 replies; 11+ messages in thread
From: Huang Ying @ 2015-04-20 4:32 UTC (permalink / raw)
To: Chengyu Song; +Cc: Linus Torvalds, LKML, LKP ML
On Sun, 2015-04-19 at 23:45 -0400, Chengyu Song wrote:
> Hi Ying,
>
> As suggested in the patch, -19 (-ENODEV) happens when debugfs is not configured (see include/linux/debugfs.h). So if debugfs is necessary for the functionality, in Kconfig, we should either declare it as a dependency, or auto select it.
I see. Thanks for explanation!
Best Regards,
Huang, Ying
> Chengyu
>
> > On Apr 19, 2015, at 11:25 PM, Huang Ying <ying.huang@intel.com> wrote:
> >
> > FYI, we noticed the below changes on
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> > commit e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6 ("ocfs2: incorrect check for debugfs returns")
> >
> > We found something as below in dmesg.
> >
> > [ 1.225136] VFS: Disk quotas dquot_6.5.2
> > [ 1.225814] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> > [ 1.228207] (swapper/0,1,0):ocfs2_init:1612 ERROR: Unable to create ocfs2 debugfs root.
> > [ 1.232445] (swapper/0,1,0):ocfs2_init:1634 ERROR: status = -19
> > [ 1.233223] ocfs2: Registered cluster interface o2cb
> > [ 1.233994] OCFS2 User DLM kernel interface loaded
> > [ 1.234618] (swapper/0,1,0):o2hb_debug_init:1318 ERROR: status = -19
> > [ 1.236183] gfs2: GFS2 installed
> > [ 1.238123] Key type asymmetric registered
> >
> > BUG: kernel boot hang
> > Elapsed time: 310
> > qemu-system-i386 -enable-kvm -cpu Haswell,+smep,+smap -kernel /kernel/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/vmlinuz-4.0.0-02646-ge2ac55b -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-i386-23/rand_boot-1-quantal-core-i386.cgz-i386-randconfig-ib0-04172352-e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6-1-20150418-31554-1woqtdb.yaml ARCH=i386 kconfig=i386-randconfig-ib0-04172352 branch=linus/master commit=e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6 BOOT_IMAGE=/kernel/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/vmlinuz-4.0.0-02646-ge2ac55b RESULT_ROOT=/result/vm-vp-quantal-i386/boot/1/quantal-core-i386.cgz/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-i386-23::dhcp drbd.minor_count=8' -initrd /fs/sde1/initrd-vm-vp-quantal-i386-23 -m 360 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-vm-vp-quantal-i386-23 -serial file:/dev/shm/kboot/serial-vm-vp-quantal-i386-23 -daemonize -display none -monitor null
> >
> > Thanks,
> > Ying Huang
> >
> > <config-4.0.0-02646-ge2ac55b><.dmesg.txt>_______________________________________________
> > LKP mailing list
> > LKP@linux.intel.com
> >
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [ocfs2] e2ac55b6a8e: ocfs2_init:1612 ERROR: Unable to create ocfs2 debugfs root
@ 2015-04-20 4:32 ` Huang Ying
0 siblings, 0 replies; 11+ messages in thread
From: Huang Ying @ 2015-04-20 4:32 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 3060 bytes --]
On Sun, 2015-04-19 at 23:45 -0400, Chengyu Song wrote:
> Hi Ying,
>
> As suggested in the patch, -19 (-ENODEV) happens when debugfs is not configured (see include/linux/debugfs.h). So if debugfs is necessary for the functionality, in Kconfig, we should either declare it as a dependency, or auto select it.
I see. Thanks for explanation!
Best Regards,
Huang, Ying
> Chengyu
>
> > On Apr 19, 2015, at 11:25 PM, Huang Ying <ying.huang@intel.com> wrote:
> >
> > FYI, we noticed the below changes on
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> > commit e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6 ("ocfs2: incorrect check for debugfs returns")
> >
> > We found something as below in dmesg.
> >
> > [ 1.225136] VFS: Disk quotas dquot_6.5.2
> > [ 1.225814] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> > [ 1.228207] (swapper/0,1,0):ocfs2_init:1612 ERROR: Unable to create ocfs2 debugfs root.
> > [ 1.232445] (swapper/0,1,0):ocfs2_init:1634 ERROR: status = -19
> > [ 1.233223] ocfs2: Registered cluster interface o2cb
> > [ 1.233994] OCFS2 User DLM kernel interface loaded
> > [ 1.234618] (swapper/0,1,0):o2hb_debug_init:1318 ERROR: status = -19
> > [ 1.236183] gfs2: GFS2 installed
> > [ 1.238123] Key type asymmetric registered
> >
> > BUG: kernel boot hang
> > Elapsed time: 310
> > qemu-system-i386 -enable-kvm -cpu Haswell,+smep,+smap -kernel /kernel/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/vmlinuz-4.0.0-02646-ge2ac55b -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-i386-23/rand_boot-1-quantal-core-i386.cgz-i386-randconfig-ib0-04172352-e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6-1-20150418-31554-1woqtdb.yaml ARCH=i386 kconfig=i386-randconfig-ib0-04172352 branch=linus/master commit=e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6 BOOT_IMAGE=/kernel/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/vmlinuz-4.0.0-02646-ge2ac55b RESULT_ROOT=/result/vm-vp-quantal-i386/boot/1/quantal-core-i386.cgz/i386-randconfig-ib0-04172352/e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-i386-23::dhcp drbd.minor_count=8' -initrd /fs/sde1/initrd-vm-vp-quantal-i386-23 -m 360 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-vm-vp-quantal-i386-23 -serial file:/dev/shm/kboot/serial-vm-vp-quantal-i386-23 -daemonize -display none -monitor null
> >
> > Thanks,
> > Ying Huang
> >
> > <config-4.0.0-02646-ge2ac55b><.dmesg.txt>_______________________________________________
> > LKP mailing list
> > LKP(a)linux.intel.com
> >
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [LKP] [ocfs2] e2ac55b6a8e: ocfs2_init:1612 ERROR: Unable to create ocfs2 debugfs root
2015-04-20 3:45 ` [LKP] " Chengyu Song
@ 2015-04-20 20:50 ` Linus Torvalds
2015-04-20 20:50 ` Linus Torvalds
1 sibling, 0 replies; 11+ messages in thread
From: Linus Torvalds @ 2015-04-20 20:50 UTC (permalink / raw)
To: Chengyu Song, Andrew Morton
Cc: Huang Ying, LKML, LKP ML, Mark Fasheh, Joel Becker
On Sun, Apr 19, 2015 at 8:45 PM, Chengyu Song <csong84@gatech.edu> wrote:
>
> As suggested in the patch, -19 (-ENODEV) happens when debugfs is not configured (see include/linux/debugfs.h). So if debugfs is necessary for the functionality, in Kconfig, we should either declare it as a dependency, or auto select it.
That makes no sense.
If it used to work before that patch, then this is a regression and
the patch needs to be reverted.
Yes, the old code apparently used to set "o2hb_debug_dir" to an error
pointer when debugfs was compiled out, but since debugfs was compiled
out, that error pointer was probably never actually *used*. So things
presumably worked.
Now, it hangs, according to Huang Ying. If so, that's clearly a
regression. That means that commit e2ac55b6a8e3 ("ocfs2: incorrect
check for debugfs returns") needs to be reverted or fixed.
Andrew?
Linus
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [ocfs2] e2ac55b6a8e: ocfs2_init:1612 ERROR: Unable to create ocfs2 debugfs root
@ 2015-04-20 20:50 ` Linus Torvalds
0 siblings, 0 replies; 11+ messages in thread
From: Linus Torvalds @ 2015-04-20 20:50 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 919 bytes --]
On Sun, Apr 19, 2015 at 8:45 PM, Chengyu Song <csong84@gatech.edu> wrote:
>
> As suggested in the patch, -19 (-ENODEV) happens when debugfs is not configured (see include/linux/debugfs.h). So if debugfs is necessary for the functionality, in Kconfig, we should either declare it as a dependency, or auto select it.
That makes no sense.
If it used to work before that patch, then this is a regression and
the patch needs to be reverted.
Yes, the old code apparently used to set "o2hb_debug_dir" to an error
pointer when debugfs was compiled out, but since debugfs was compiled
out, that error pointer was probably never actually *used*. So things
presumably worked.
Now, it hangs, according to Huang Ying. If so, that's clearly a
regression. That means that commit e2ac55b6a8e3 ("ocfs2: incorrect
check for debugfs returns") needs to be reverted or fixed.
Andrew?
Linus
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [LKP] [ocfs2] e2ac55b6a8e: ocfs2_init:1612 ERROR: Unable to create ocfs2 debugfs root
2015-04-20 20:50 ` Linus Torvalds
@ 2015-04-20 21:10 ` Andrew Morton
-1 siblings, 0 replies; 11+ messages in thread
From: Andrew Morton @ 2015-04-20 21:10 UTC (permalink / raw)
To: Linus Torvalds
Cc: Chengyu Song, Huang Ying, LKML, LKP ML, Mark Fasheh, Joel Becker
On Mon, 20 Apr 2015 13:50:38 -0700 Linus Torvalds <torvalds@linux-foundation.org> wrote:
> On Sun, Apr 19, 2015 at 8:45 PM, Chengyu Song <csong84@gatech.edu> wrote:
> >
> > As suggested in the patch, -19 (-ENODEV) happens when debugfs is not configured (see include/linux/debugfs.h). So if debugfs is necessary for the functionality, in Kconfig, we should either declare it as a dependency, or auto select it.
>
> That makes no sense.
>
> If it used to work before that patch, then this is a regression and
> the patch needs to be reverted.
>
> Yes, the old code apparently used to set "o2hb_debug_dir" to an error
> pointer when debugfs was compiled out, but since debugfs was compiled
> out, that error pointer was probably never actually *used*. So things
> presumably worked.
>
> Now, it hangs, according to Huang Ying. If so, that's clearly a
> regression. That means that commit e2ac55b6a8e3 ("ocfs2: incorrect
> check for debugfs returns") needs to be reverted or fixed.
>
> Andrew?
>
Yes, that one snuck through. I think a revert would be best at this
stage, please.
The debugfs interfaces are exceptional, and not very nice. My
understanding of the general idea is:
- debugfs is just for debug and subsystems shouldn't care whether
debugfs is present or not.
- if a debugfs call fails, the subsystem shouldn't care - don't log
it, just ignore it.
The return semantics from things like debugfs_create_dir() are:
NULL: debugfs is available, but something went wrong. We don't
tell you what it was.
-ENODEV: debugfs isn't available
-Exxx: I don't think other errnos are supposed to happen.
So the ofs2 code shouldn't log unless the debugfs calls return NULL.
And really, they shouldn't log at all, due to the general debugfs
philosophy of "errors should be silently ignored".
A problem with functions like o2hb_debug_init() is that when
CONFIG_DEBUG_FS=n they will still generate significant amounts of code.
That's fixable with something like
--- a/fs/ocfs2/cluster/heartbeat.c~a
+++ a/fs/ocfs2/cluster/heartbeat.c
@@ -1312,12 +1312,8 @@ static int o2hb_debug_init(void)
int ret = -ENOMEM;
o2hb_debug_dir = debugfs_create_dir(O2HB_DEBUG_DIR, NULL);
- if (IS_ERR_OR_NULL(o2hb_debug_dir)) {
- ret = o2hb_debug_dir ?
- PTR_ERR(o2hb_debug_dir) : -ENOMEM;
- mlog_errno(ret);
- goto bail;
- }
+ if (IS_ERR(o2hb_debug_dir))
+ return 0;
o2hb_debug_livenodes = o2hb_debug_create(O2HB_DEBUG_LIVENODES,
o2hb_debug_dir,
Here, the compiler shold see that the `return 0' is always taken (due
to the -ENODEV) and the rest of the function will be eliminated.
Or we wrap large pieces of code inside `#ifdef CONFIG_DEBUG_FS'.
Either way, a cleanup here needs some thought and study. And better
testing, plesae.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [ocfs2] e2ac55b6a8e: ocfs2_init:1612 ERROR: Unable to create ocfs2 debugfs root
@ 2015-04-20 21:10 ` Andrew Morton
0 siblings, 0 replies; 11+ messages in thread
From: Andrew Morton @ 2015-04-20 21:10 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 2854 bytes --]
On Mon, 20 Apr 2015 13:50:38 -0700 Linus Torvalds <torvalds@linux-foundation.org> wrote:
> On Sun, Apr 19, 2015 at 8:45 PM, Chengyu Song <csong84@gatech.edu> wrote:
> >
> > As suggested in the patch, -19 (-ENODEV) happens when debugfs is not configured (see include/linux/debugfs.h). So if debugfs is necessary for the functionality, in Kconfig, we should either declare it as a dependency, or auto select it.
>
> That makes no sense.
>
> If it used to work before that patch, then this is a regression and
> the patch needs to be reverted.
>
> Yes, the old code apparently used to set "o2hb_debug_dir" to an error
> pointer when debugfs was compiled out, but since debugfs was compiled
> out, that error pointer was probably never actually *used*. So things
> presumably worked.
>
> Now, it hangs, according to Huang Ying. If so, that's clearly a
> regression. That means that commit e2ac55b6a8e3 ("ocfs2: incorrect
> check for debugfs returns") needs to be reverted or fixed.
>
> Andrew?
>
Yes, that one snuck through. I think a revert would be best at this
stage, please.
The debugfs interfaces are exceptional, and not very nice. My
understanding of the general idea is:
- debugfs is just for debug and subsystems shouldn't care whether
debugfs is present or not.
- if a debugfs call fails, the subsystem shouldn't care - don't log
it, just ignore it.
The return semantics from things like debugfs_create_dir() are:
NULL: debugfs is available, but something went wrong. We don't
tell you what it was.
-ENODEV: debugfs isn't available
-Exxx: I don't think other errnos are supposed to happen.
So the ofs2 code shouldn't log unless the debugfs calls return NULL.
And really, they shouldn't log at all, due to the general debugfs
philosophy of "errors should be silently ignored".
A problem with functions like o2hb_debug_init() is that when
CONFIG_DEBUG_FS=n they will still generate significant amounts of code.
That's fixable with something like
--- a/fs/ocfs2/cluster/heartbeat.c~a
+++ a/fs/ocfs2/cluster/heartbeat.c
@@ -1312,12 +1312,8 @@ static int o2hb_debug_init(void)
int ret = -ENOMEM;
o2hb_debug_dir = debugfs_create_dir(O2HB_DEBUG_DIR, NULL);
- if (IS_ERR_OR_NULL(o2hb_debug_dir)) {
- ret = o2hb_debug_dir ?
- PTR_ERR(o2hb_debug_dir) : -ENOMEM;
- mlog_errno(ret);
- goto bail;
- }
+ if (IS_ERR(o2hb_debug_dir))
+ return 0;
o2hb_debug_livenodes = o2hb_debug_create(O2HB_DEBUG_LIVENODES,
o2hb_debug_dir,
Here, the compiler shold see that the `return 0' is always taken (due
to the -ENODEV) and the rest of the function will be eliminated.
Or we wrap large pieces of code inside `#ifdef CONFIG_DEBUG_FS'.
Either way, a cleanup here needs some thought and study. And better
testing, plesae.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [LKP] [ocfs2] e2ac55b6a8e: ocfs2_init:1612 ERROR: Unable to create ocfs2 debugfs root
2015-04-20 21:10 ` Andrew Morton
@ 2015-04-20 22:55 ` Chengyu Song
-1 siblings, 0 replies; 11+ messages in thread
From: Chengyu Song @ 2015-04-20 22:55 UTC (permalink / raw)
To: Andrew Morton
Cc: Linus Torvalds, Huang Ying, LKML, LKP ML, Mark Fasheh, Joel Becker
> On Apr 20, 2015, at 5:10 PM, Andrew Morton <akpm@linux-foundation.org> wrote:
>
> On Mon, 20 Apr 2015 13:50:38 -0700 Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
>> On Sun, Apr 19, 2015 at 8:45 PM, Chengyu Song <csong84@gatech.edu> wrote:
>>>
>>> As suggested in the patch, -19 (-ENODEV) happens when debugfs is not configured (see include/linux/debugfs.h). So if debugfs is necessary for the functionality, in Kconfig, we should either declare it as a dependency, or auto select it.
>>
>> That makes no sense.
>>
>> If it used to work before that patch, then this is a regression and
>> the patch needs to be reverted.
>>
>> Yes, the old code apparently used to set "o2hb_debug_dir" to an error
>> pointer when debugfs was compiled out, but since debugfs was compiled
>> out, that error pointer was probably never actually *used*. So things
>> presumably worked.
>>
>> Now, it hangs, according to Huang Ying. If so, that's clearly a
>> regression. That means that commit e2ac55b6a8e3 ("ocfs2: incorrect
>> check for debugfs returns") needs to be reverted or fixed.
>>
>> Andrew?
>>
>
> Yes, that one snuck through. I think a revert would be best at this
> stage, please.
>
>
>
> The debugfs interfaces are exceptional, and not very nice. My
> understanding of the general idea is:
>
> - debugfs is just for debug and subsystems shouldn't care whether
> debugfs is present or not.
>
> - if a debugfs call fails, the subsystem shouldn't care - don't log
> it, just ignore it.
>
>
> The return semantics from things like debugfs_create_dir() are:
>
> NULL: debugfs is available, but something went wrong. We don't
> tell you what it was.
>
> -ENODEV: debugfs isn't available
>
> -Exxx: I don't think other errnos are supposed to happen.
>
>
> So the ofs2 code shouldn't log unless the debugfs calls return NULL.
> And really, they shouldn't log at all, due to the general debugfs
> philosophy of "errors should be silently ignored".
>
>
>
> A problem with functions like o2hb_debug_init() is that when
> CONFIG_DEBUG_FS=n they will still generate significant amounts of code.
> That's fixable with something like
>
> --- a/fs/ocfs2/cluster/heartbeat.c~a
> +++ a/fs/ocfs2/cluster/heartbeat.c
> @@ -1312,12 +1312,8 @@ static int o2hb_debug_init(void)
> int ret = -ENOMEM;
>
> o2hb_debug_dir = debugfs_create_dir(O2HB_DEBUG_DIR, NULL);
> - if (IS_ERR_OR_NULL(o2hb_debug_dir)) {
> - ret = o2hb_debug_dir ?
> - PTR_ERR(o2hb_debug_dir) : -ENOMEM;
> - mlog_errno(ret);
> - goto bail;
> - }
> + if (IS_ERR(o2hb_debug_dir))
> + return 0;
>
> o2hb_debug_livenodes = o2hb_debug_create(O2HB_DEBUG_LIVENODES,
> o2hb_debug_dir,
>
> Here, the compiler shold see that the `return 0' is always taken (due
> to the -ENODEV) and the rest of the function will be eliminated.
>
> Or we wrap large pieces of code inside `#ifdef CONFIG_DEBUG_FS'.
>
> Either way, a cleanup here needs some thought and study. And better
> testing, plesae.
First of all, I apologize for this incorrect patch. It was created in concern of potential used of the error pointer, but as there is no such use at all, there’s no need for a patch and should be reverted.
This fake problem was discovered by our static checker that compares different fs implementations. And what we found is that there are three ways how debugfs is handled:
- aware of -ENODEV and explicitly check for this error => ubifs
- warp uses with `#ifdef CONFIG_DEBUG_FS’ => btrfs, certain module of ocfs2
- isolate the code and declare dependency on DEBUG_FS in Kconfig => OCFS2_FS_STATS
Lacking enough testing and understanding of actual dependency of ocfs2 on debugfs, especially it uses two different approaches to avoid -ENODEV, the initial patch was mainly for discussing and I didn’t expect it got merged. But since a little more study would reveal there’s no actual use of these error pointers if debugfs is not configured, it’s my fault and I want to apologize again.
Chengyu
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [ocfs2] e2ac55b6a8e: ocfs2_init:1612 ERROR: Unable to create ocfs2 debugfs root
@ 2015-04-20 22:55 ` Chengyu Song
0 siblings, 0 replies; 11+ messages in thread
From: Chengyu Song @ 2015-04-20 22:55 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 4094 bytes --]
> On Apr 20, 2015, at 5:10 PM, Andrew Morton <akpm@linux-foundation.org> wrote:
>
> On Mon, 20 Apr 2015 13:50:38 -0700 Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
>> On Sun, Apr 19, 2015 at 8:45 PM, Chengyu Song <csong84@gatech.edu> wrote:
>>>
>>> As suggested in the patch, -19 (-ENODEV) happens when debugfs is not configured (see include/linux/debugfs.h). So if debugfs is necessary for the functionality, in Kconfig, we should either declare it as a dependency, or auto select it.
>>
>> That makes no sense.
>>
>> If it used to work before that patch, then this is a regression and
>> the patch needs to be reverted.
>>
>> Yes, the old code apparently used to set "o2hb_debug_dir" to an error
>> pointer when debugfs was compiled out, but since debugfs was compiled
>> out, that error pointer was probably never actually *used*. So things
>> presumably worked.
>>
>> Now, it hangs, according to Huang Ying. If so, that's clearly a
>> regression. That means that commit e2ac55b6a8e3 ("ocfs2: incorrect
>> check for debugfs returns") needs to be reverted or fixed.
>>
>> Andrew?
>>
>
> Yes, that one snuck through. I think a revert would be best at this
> stage, please.
>
>
>
> The debugfs interfaces are exceptional, and not very nice. My
> understanding of the general idea is:
>
> - debugfs is just for debug and subsystems shouldn't care whether
> debugfs is present or not.
>
> - if a debugfs call fails, the subsystem shouldn't care - don't log
> it, just ignore it.
>
>
> The return semantics from things like debugfs_create_dir() are:
>
> NULL: debugfs is available, but something went wrong. We don't
> tell you what it was.
>
> -ENODEV: debugfs isn't available
>
> -Exxx: I don't think other errnos are supposed to happen.
>
>
> So the ofs2 code shouldn't log unless the debugfs calls return NULL.
> And really, they shouldn't log at all, due to the general debugfs
> philosophy of "errors should be silently ignored".
>
>
>
> A problem with functions like o2hb_debug_init() is that when
> CONFIG_DEBUG_FS=n they will still generate significant amounts of code.
> That's fixable with something like
>
> --- a/fs/ocfs2/cluster/heartbeat.c~a
> +++ a/fs/ocfs2/cluster/heartbeat.c
> @@ -1312,12 +1312,8 @@ static int o2hb_debug_init(void)
> int ret = -ENOMEM;
>
> o2hb_debug_dir = debugfs_create_dir(O2HB_DEBUG_DIR, NULL);
> - if (IS_ERR_OR_NULL(o2hb_debug_dir)) {
> - ret = o2hb_debug_dir ?
> - PTR_ERR(o2hb_debug_dir) : -ENOMEM;
> - mlog_errno(ret);
> - goto bail;
> - }
> + if (IS_ERR(o2hb_debug_dir))
> + return 0;
>
> o2hb_debug_livenodes = o2hb_debug_create(O2HB_DEBUG_LIVENODES,
> o2hb_debug_dir,
>
> Here, the compiler shold see that the `return 0' is always taken (due
> to the -ENODEV) and the rest of the function will be eliminated.
>
> Or we wrap large pieces of code inside `#ifdef CONFIG_DEBUG_FS'.
>
> Either way, a cleanup here needs some thought and study. And better
> testing, plesae.
First of all, I apologize for this incorrect patch. It was created in concern of potential used of the error pointer, but as there is no such use at all, there’s no need for a patch and should be reverted.
This fake problem was discovered by our static checker that compares different fs implementations. And what we found is that there are three ways how debugfs is handled:
- aware of -ENODEV and explicitly check for this error => ubifs
- warp uses with `#ifdef CONFIG_DEBUG_FS’ => btrfs, certain module of ocfs2
- isolate the code and declare dependency on DEBUG_FS in Kconfig => OCFS2_FS_STATS
Lacking enough testing and understanding of actual dependency of ocfs2 on debugfs, especially it uses two different approaches to avoid -ENODEV, the initial patch was mainly for discussing and I didn’t expect it got merged. But since a little more study would reveal there’s no actual use of these error pointers if debugfs is not configured, it’s my fault and I want to apologize again.
Chengyu
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2015-04-20 22:55 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-04-20 3:25 [LKP] [ocfs2] e2ac55b6a8e: ocfs2_init:1612 ERROR: Unable to create ocfs2 debugfs root Huang Ying
2015-04-20 3:25 ` Huang Ying
2015-04-20 3:45 ` [LKP] " Chengyu Song
2015-04-20 4:32 ` Huang Ying
2015-04-20 4:32 ` Huang Ying
2015-04-20 20:50 ` [LKP] " Linus Torvalds
2015-04-20 20:50 ` Linus Torvalds
2015-04-20 21:10 ` [LKP] " Andrew Morton
2015-04-20 21:10 ` Andrew Morton
2015-04-20 22:55 ` [LKP] " Chengyu Song
2015-04-20 22:55 ` Chengyu Song
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.