From: Finn Thain <fthain@linux-m68k.org>
To: Christophe Leroy <christophe.leroy@csgroup.eu>,
Stan Johnson <userm57@yahoo.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <mpe@ellerman.id.au>,
Nick Piggin <npiggin@gmail.com>,
linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH v3 31/41] powerpc/32: Dismantle EXC_XFER_STD/LITE/TEMPLATE
Date: Sat, 31 Jul 2021 20:12:22 +1000 (AEST) [thread overview]
Message-ID: <666e3ab4-372-27c2-4621-7cc3933756dd@linux-m68k.org> (raw)
In-Reply-To: <ca5795d04a220586b7037dbbbe6951dfa9e768eb.1615552867.git.christophe.leroy@csgroup.eu>
Hi Christophe,
On Fri, 12 Mar 2021, Christophe Leroy wrote:
> In order to get more control in exception prolog, dismantle all non
> standard exception macros, finishing with EXC_XFER_STD and EXC_XFER_LITE
> and EXC_XFER_TEMPLATE.
>
> Also remove transfer_to_handler_full and ret_from_except and
> ret_from_except_full as they are not used anymore.
>
> Last parameter of EXCEPTION() is now ignored, will be removed in a later
> patch to avoid too much churn.
>
> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> ---
> arch/powerpc/kernel/entry_32.S | 42 +-----------------------
> arch/powerpc/kernel/head_32.h | 21 ++++--------
> arch/powerpc/kernel/head_40x.S | 33 ++++++++++++-------
> arch/powerpc/kernel/head_8xx.S | 12 +++++--
> arch/powerpc/kernel/head_book3s_32.S | 27 ++++++++++-----
> arch/powerpc/kernel/head_booke.h | 49 +++++++++++++++-------------
> arch/powerpc/kernel/head_fsl_booke.S | 14 +++++---
> 7 files changed, 92 insertions(+), 106 deletions(-)
>
Stan Johnson contacted me about a regression in mainline that he observed
on his G3 Powerbooks. Using 'git bisect' we determined that this patch was
the cause of the regression, i.e. commit 4c0104a83fc3 ("powerpc/32:
Dismantle EXC_XFER_STD/LITE/TEMPLATE").
When testing 4c0104a83fc and all subsequent builds, various user processes
were liable to segfault. Here is the console log that Stan provided:
[ 0.000000] printk: debug: ignoring loglevel setting.
[ 0.000000] Total memory = 512MB; using 1024kB for hash table
[ 0.000000] Activating Kernel Userspace Execution Prevention
[ 0.000000] Activating Kernel Userspace Access Protection
[ 0.000000] Linux version 5.12.0-rc3-pmac-00067-g4c0104a83fc (johnson@ThinkPad) (powerpc-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #22 SMP Fri Jul 30 12:15:00 MDT 2021
[ 0.000000] ioremap() called early from probe_one_macio+0x130/0x268. Use early_ioremap() instead
[ 0.000000] Found a Gatwick mac-io controller, rev: 0, mapped at 0x(ptrval)
[ 0.000000] ioremap() called early from probe_one_macio+0x130/0x268. Use early_ioremap() instead
[ 0.000000] Found a Heathrow mac-io controller, rev: 0, mapped at 0x(ptrval)
[ 0.000000] PowerMac motherboard: PowerBook Wallstreet
[ 0.000000] ioremap() called early from find_via_pmu+0x244/0x56c. Use early_ioremap() instead
[ 0.000000] PMU driver v2 initialized for PowerBook G3 Series, firmware: 0a
[ 0.000000] Using PowerMac machine description
[ 0.000000] printk: bootconsole [udbg0] enabled
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] -----------------------------------------------------
[ 0.000000] phys_mem_size = 0x20000000
[ 0.000000] dcache_bsize = 0x20
[ 0.000000] icache_bsize = 0x20
[ 0.000000] cpu_features = 0x000000000501a008
[ 0.000000] possible = 0x00000000277de14a
[ 0.000000] always = 0x0000000001000000
[ 0.000000] cpu_user_features = 0x8c000001 0x00000000
[ 0.000000] mmu_features = 0x00000001
[ 0.000000] Hash_size = 0x100000
[ 0.000000] Hash_mask = 0x3fff
[ 0.000000] -----------------------------------------------------
[ 0.000000] ioremap() called early from pmac_setup_arch+0x10c/0x294. Use early_ioremap() instead
[ 0.000000] nvram: OF partition at 0x1800
[ 0.000000] nvram: XP partition at 0x1300
[ 0.000000] nvram: NR partition at 0x1400
[ 0.000000] Top of RAM: 0x20000000, Total RAM: 0x20000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] DMA zone: 1024 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 131072 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 13 pages/cpu s21644 r8192 d23412 u53248
[ 0.000000] pcpu-alloc: s21644 r8192 d23412 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: root=/dev/sda12 console=ttyS0 console=tty printk.time earlyprintk ignore_loglevel video=ofonly
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 498908K/524288K available (6756K kernel code, 352K rwdata, 1276K rodata, 1232K init, 176K bss, 25380K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xffbbf000..0xfffff000 : fixmap
[ 0.000000] * 0xff400000..0xff800000 : highmem PTEs
[ 0.000000] * 0xff2fd000..0xff400000 : early ioremap
[ 0.000000] * 0xe1000000..0xff2fd000 : vmalloc & ioremap
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] irq: Found primary Apple PIC /pci/mac-io for 64 irqs
[ 0.000000] irq: Found slave Apple PIC /pci/mac-io for 64 irqs cascade: 27
[ 0.000000] irq: System has 128 possible interrupts
[ 0.000000] GMT Delta read from XPRAM: -360 minutes, DST: on
[ 0.000000] random: get_random_u32 called from start_kernel+0x36c/0x4d8 with crng_init=0
[ 0.000000] time_init: decrementer frequency = 16.671650 MHz
[ 0.000000] time_init: processor frequency = 264.000000 MHz
[ 0.000038] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x3d85178a6, max_idle_ns: 440795202430 ns
[ 0.000097] clocksource: timebase mult[3bfb68a3] shift[24] registered
[ 0.000201] clockevent: decrementer mult[44497e0] shift[32] cpu[0]
[ 0.001368] Console: colour dummy device 80x25
[ 0.001436] printk: console [tty0] enabled
[ 0.001487] printk: bootconsole [udbg0] disabled
[ 0.001882] pmac_zilog: serial modem detected
[ 1.345729] printk: console [ttyS0] enabled
[ 1.358329] pid_max: default: 32768 minimum: 301
[ 1.372599] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 1.394156] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 1.422118] rcu: Hierarchical SRCU implementation.
[ 1.437119] smp: Bringing up secondary CPUs ...
[ 1.450268] smp: Brought up 1 node, 1 CPU
[ 1.463448] devtmpfs: initialized
[ 1.473485] Duplicate name in PowerPC,750, renamed to "l2-cache#1"
[ 1.494492] Duplicate name in pci, renamed to "mac-io#1"
[ 1.511648] Duplicate name in pci, renamed to "pccard#1"
[ 1.530211] Found Grackle (MPC106) PCI host bridge at 0x0000000080000000. Firmware bus number: 0->0
[ 1.556990] PCI host bridge /pci (primary) ranges:
[ 1.571383] IO 0x00000000fe000000..0x00000000fe7fffff -> 0x0000000000000000
[ 1.593309] MEM 0x00000000fd000000..0x00000000fdffffff -> 0x0000000000000000
[ 1.614579] MEM 0x0000000080000000..0x00000000fcffffff -> 0x0000000080000000
[ 1.637120] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 1.667441] futex hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 1.688431] NET: Registered protocol family 16
[ 1.707910] PMU i2c /pci/mac-io/via-pmu
[ 1.722983] channel 1 bus <multibus>
[ 1.733605] channel 2 bus <multibus>
[ 1.746841] PCI: Probing PCI hardware
[ 1.761155] PCI host bridge to bus 0000:00
[ 1.773432] pci_bus 0000:00: root bus resource [io 0x0000-0x7fffff]
[ 1.792247] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfdffffff] (bus address [0x00000000-0x00ffffff])
[ 1.822825] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffff]
[ 1.843419] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.859881] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 1.879871] pci 0000:00:00.0: [1057:0002] type 00 class 0x060000
[ 1.899189] pci 0000:00:0d.0: [106b:0017] type 00 class 0xff0000
[ 1.916838] pci 0000:00:0d.0: reg 0x10: [mem 0xf4000000-0xf407ffff]
[ 1.936859] pci 0000:00:10.0: [106b:0017] type 00 class 0xff0000
[ 1.954533] pci 0000:00:10.0: reg 0x10: [mem 0xf3000000-0xf307ffff]
[ 1.974637] pci 0000:00:11.0: [1002:4c50] type 00 class 0x038000
[ 1.992312] pci 0000:00:11.0: reg 0x10: [mem 0x82000000-0x82ffffff]
[ 2.011110] pci 0000:00:11.0: reg 0x14: [io 0x0400-0x04ff]
[ 2.027818] pci 0000:00:11.0: reg 0x18: [mem 0x82fff000-0x82ffffff]
[ 2.046665] pci 0000:00:11.0: reg 0x30: [mem 0xfd000000-0xfd01ffff pref]
[ 2.066830] pci 0000:00:11.0: supports D1 D2
[ 2.080778] pci 0000:00:13.0: [104c:ac15] type 02 class 0x060700
[ 2.098478] pci 0000:00:13.0: reg 0x10: [mem 0x81803000-0x81803fff]
[ 2.118276] pci 0000:00:13.1: [104c:ac15] type 02 class 0x060700
[ 2.135978] pci 0000:00:13.1: reg 0x10: [mem 0x81802000-0x81802fff]
[ 2.156532] pci_bus 0000:01: extended config space not accessible
[ 2.175227] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 04
[ 2.195189] pci_bus 0000:05: extended config space not accessible
[ 2.213538] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 08
[ 2.233067] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 08
[ 2.253708] PCI: Cannot allocate resource region 2 of device 0000:00:11.0, will remap
[ 2.277131] PCI 0000:00 Cannot reserve Legacy IO [io 0x0000-0x0fff]
[ 2.296121] pci 0000:00:13.0: BAR 9: assigned [mem 0x84000000-0x87ffffff pref]
[ 2.317651] pci 0000:00:13.0: BAR 10: assigned [mem 0x88000000-0x8bffffff]
[ 2.338269] pci 0000:00:13.1: BAR 9: assigned [mem 0x8c000000-0x8fffffff pref]
[ 2.359955] pci 0000:00:13.1: BAR 10: assigned [mem 0x90000000-0x93ffffff]
[ 2.380606] pci 0000:00:11.0: BAR 6: assigned [mem 0xfd000000-0xfd01ffff pref]
[ 2.402311] pci 0000:00:11.0: BAR 2: assigned [mem 0xfd020000-0xfd020fff]
[ 2.422704] pci 0000:00:13.0: BAR 7: assigned [io 0x1000-0x10ff]
[ 2.441000] pci 0000:00:13.0: BAR 8: assigned [io 0x1100-0x11ff]
[ 2.459300] pci 0000:00:13.1: BAR 7: assigned [io 0x1200-0x12ff]
[ 2.477600] pci 0000:00:13.1: BAR 8: assigned [io 0x1300-0x13ff]
[ 2.495919] pci 0000:00:13.0: CardBus bridge to [bus 01-04]
[ 2.512627] pci 0000:00:13.0: bridge window [io 0x1000-0x10ff]
[ 2.530925] pci 0000:00:13.0: bridge window [io 0x1100-0x11ff]
[ 2.549229] pci 0000:00:13.0: bridge window [mem 0x84000000-0x87ffffff pref]
[ 2.570928] pci 0000:00:13.0: bridge window [mem 0x88000000-0x8bffffff]
[ 2.591320] pci 0000:00:13.1: CardBus bridge to [bus 05-08]
[ 2.608046] pci 0000:00:13.1: bridge window [io 0x1200-0x12ff]
[ 2.626349] pci 0000:00:13.1: bridge window [io 0x1300-0x13ff]
[ 2.644651] pci 0000:00:13.1: bridge window [mem 0x8c000000-0x8fffffff pref]
[ 2.666350] pci 0000:00:13.1: bridge window [mem 0x90000000-0x93ffffff]
[ 2.686748] pci_bus 0000:00: resource 4 [io 0x0000-0x7fffff]
[ 2.703993] pci_bus 0000:00: resource 5 [mem 0xfd000000-0xfdffffff]
[ 2.722816] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffff]
[ 2.741641] pci_bus 0000:01: resource 0 [io 0x1000-0x10ff]
[ 2.758373] pci_bus 0000:01: resource 1 [io 0x1100-0x11ff]
[ 2.775105] pci_bus 0000:01: resource 2 [mem 0x84000000-0x87ffffff pref]
[ 2.795235] pci_bus 0000:01: resource 3 [mem 0x88000000-0x8bffffff]
[ 2.814059] pci_bus 0000:05: resource 0 [io 0x1200-0x12ff]
[ 2.830791] pci_bus 0000:05: resource 1 [io 0x1300-0x13ff]
[ 2.847523] pci_bus 0000:05: resource 2 [mem 0x8c000000-0x8fffffff pref]
[ 2.867653] pci_bus 0000:05: resource 3 [mem 0x90000000-0x93ffffff]
[ 3.004865] vgaarb: loaded
[ 3.015684] SCSI subsystem initialized
[ 3.028576] libata version 3.00 loaded.
[ 3.041525] usbcore: registered new interface driver usbfs
[ 3.058590] usbcore: registered new interface driver hub
[ 3.074722] usbcore: registered new device driver usb
[ 3.097574] clocksource: Switched to clocksource timebase
[ 3.176945] NET: Registered protocol family 2
[ 3.196269] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 3.221544] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 3.244755] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 3.266467] TCP: Hash tables configured (established 4096 bind 4096)
[ 3.285534] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 3.305032] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 3.326164] NET: Registered protocol family 1
[ 3.339985] RPC: Registered named UNIX socket transport module.
[ 3.357356] RPC: Registered udp transport module.
[ 3.371459] RPC: Registered tcp transport module.
[ 3.385564] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.405111] PCI: CLS 32 bytes, default 32
[ 3.418590] Thermal assist unit using workqueue, shrink_timer: 2000 ms
[ 3.444637] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 3.465435] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.484342] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.506233] io scheduler mq-deadline registered
[ 3.521141] pci 0000:00:11.0: enabling device (0086 -> 0087)
[ 3.537885] Using unsupported 1024x768 (null) at 82801000, depth=32, pitch=4096
[ 3.682913] Console: switching to colour frame buffer device 128x48
[ 3.823127] fb0: Open Firmware frame buffer device on /pci/ATY,RageLTPro
[ 3.845192] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 3.869499] Non-volatile memory driver v1.3
[ 3.893598] brd: module loaded
[ 3.931206] loop: module loaded
[ 3.942363] MacIO PCI driver attached to Gatwick chipset
[ 3.959805] MacIO PCI driver attached to Heathrow chipset
[ 3.986647] swim3 0.00015000:floppy: [fd0] SWIM3 floppy controller in media bay
[ 4.015851] 0.00013020:ch-a: ttyS0 at MMIO 0xf3013020 (irq = 16, base_baud = 230400) is a Z85c30 ESCC - Serial port
[ 4.052300] 0.00013000:ch-b: ttyS1 at MMIO 0xf3013000 (irq = 17, base_baud = 230400) is a Z85c30 ESCC - Infrared port
[ 4.090256] macio: fixed media-bay irq on gatwick
[ 4.107695] macio: fixed left floppy irqs
[ 4.121515] swim3 1.00015000:floppy: [fd1] Couldn't request interrupt
[ 4.142797] swim3: probe of 1.00015000:floppy failed with error -16
[ 4.163133] macio: fixed left ide irqs
[ 4.175485] macio: fixed SCC irqs on gatwick
[ 4.189655] 1.00013020:ch-a: ttyS2 at MMIO 0xf4013020 (irq = 79, base_baud = 230400) is a Z85c30 ESCC - Internal modem
[ 4.226442] mediabay0: Registered Heathrow media-bay
[ 4.455126] mediabay1: Registered Heathrow media-bay
[ 4.686271] PMU Backlight initialized (pmubl)
[ 4.703522] mesh: configured for synchronous 5 MB/s
[ 4.719262] mediabay1: Bay contains a floppy drive
[ 4.954580] mesh: performing initial bus reset...
[ 6.861383] random: fast init done
[ 6.976730] adb device [2]: 2 0xC3
[ 7.044008] adb device [3]: 3 0x1
[ 7.107927] adb device [7]: 7 0x1F
[ 7.181591] ADB keyboard at 2 has handler 0xC3
[ 7.244084] Detected ADB keyboard, type ANSI.
[ 7.306604] input: ADB keyboard as /devices/virtual/input/input0
[ 7.374680] input: ADB Powerbook buttons as /devices/virtual/input/input1
[ 7.509364] ADB mouse (trackpad) at 3 has handler 0x4
[ 7.573745] input: ADB mouse as /devices/virtual/input/input2
[ 9.034624] scsi host0: MESH
[ 12.394536] pata-macio 0.00020000:ata0: Activating pata-macio chipset Heathrow ATA, Apple bus ID 0
[ 12.477627] scsi host1: pata_macio
[ 12.540331] ata1: PATA max MWDMA2 irq 30
[ 12.795027] ata1.00: ATA-7: SAMSUNG HM100JC, YN100-08, max UDMA/100
[ 12.865009] ata1.00: 195371568 sectors, multi 8: LBA48
[ 12.935050] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HM100JC 0-08 PQ: 0 ANSI: 5
[ 13.013610] sd 1:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.2 GiB)
[ 13.088556] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 13.158582] sd 1:0:0:0: [sda] Write Protect is off
[ 13.223470] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 13.289075] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 13.674503] pata-macio 0.00021000:ata1: Activating pata-macio chipset Heathrow ATA, Apple bus ID 1
[ 13.757042] scsi host2: pata_macio
[ 13.819249] ata2: PATA max MWDMA2 irq 36
[ 13.904489] pata-macio 1.00021000:ata4: Activating pata-macio chipset Heathrow ATA, Apple bus ID 4
[ 13.983164] genirq: Flags mismatch irq 36. 00000000 (pata-macio[1.00021000:ata4]) vs. 00000000 (pata-macio[0.00021000:ata1])
[ 14.070207] pata-macio: probe of 1.00021000:ata4 failed with error -16
[ 14.479032] eth0: BMAC at 00:05:02:07:5a:a6
[ 14.479077]
[ 14.615187] aoe: AoE v85 initialised.
[ 14.679798] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 14.753685] ehci-pci: EHCI PCI platform driver
[ 14.820303] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 14.893038] ohci-pci: OHCI PCI platform driver
[ 14.959871] usbcore: registered new interface driver uas
[ 15.029671] usbcore: registered new interface driver usb-storage
[ 15.104150] mousedev: PS/2 mouse device common for all mice
[ 15.178852] rtc-generic rtc-generic: registered as rtc0
[ 15.248707] i2c /dev entries driver
[ 15.313358] PowerMac i2c bus pmu 2 registered
[ 15.379651] PowerMac i2c bus pmu 1 registered
[ 15.450539] usbcore: registered new interface driver usbhid
[ 15.517786] usbhid: USB HID core driver
[ 15.581161] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15
[ 15.682021] sd 1:0:0:0: [sda] Attached SCSI disk
[ 15.748688] NET: Registered protocol family 17
[ 15.815278] drmem: No dynamic reconfiguration memory found
[ 15.905030] EXT4-fs (sda12): mounting ext3 file system using the ext4 subsystem
[ 16.093352] EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[ 16.177770] VFS: Mounted root (ext3 filesystem) readonly on device 8:12.
[ 16.267681] Freeing unused kernel memory: 1232K
[ 16.337890] Kernel memory protection not selected by kernel config.
[ 16.413504] Run /sbin/init as init process
[ 16.481986] with arguments:
[ 16.546360] /sbin/init
[ 16.609020] earlyprintk
[ 16.671224] with environment:
[ 16.733922] HOME=/
[ 16.792877] TERM=linux
[ 17.149488] BUG: Unable to handle kernel data access on read at 0x5071b5f4
[ 17.222336] Faulting instruction address: 0xc0004194
[ 17.289513] Oops: Kernel access of bad area, sig: 11 [#1]
[ 17.357646] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
[ 17.426007] Modules linked in:
[ 17.485807] CPU: 0 PID: 1 Comm: init Not tainted 5.12.0-rc3-pmac-00067-g4c0104a83fc #22
[ 17.561902] NIP: c0004194 LR: c0004194 CTR: 00000000
[ 17.629263] REGS: e1025e70 TRAP: 0300 Not tainted (5.12.0-rc3-pmac-00067-g4c0104a83fc)
[ 17.707694] MSR: 00001032 <ME,IR,DR,RI> CR: 40025f30 XER: 00000000
[ 17.780835] DAR: 5071b5f4 DSISR: 40000000
[ 17.780835] GPR00: 00000000 e1025f30 c14432e0 e1025f40 00000000 00000000 00000000 00000000
[ 17.780835] GPR08: 00000000 0000d032 00000300 5071b53c c0000000 00000000 00000000 00000000
[ 17.780835] GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 17.780835] GPR24: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 18.155821] NIP [c0004194] DataAccess_virt+0x8c/0xac
[ 18.218757] LR [c0004194] DataAccess_virt+0x8c/0xac
[ 18.281072] Call Trace:
[ 18.335751] [e1025f30] [c0004240] InstructionAccess_virt+0x8c/0x90 (unreliable)
[ 18.407057] --- interrupt: 300 at 0xb780d500
[ 18.468711] NIP: b780d500 LR: b7828554 CTR: 00000000
[ 18.532657] REGS: e1025f40 TRAP: 0300 Not tainted (5.12.0-rc3-pmac-00067-g4c0104a83fc)
[ 18.607221] MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 00000000 XER: 00000000
[ 18.678419] DAR: bfcbfd50 DSISR: 42000000
[ 18.678419] GPR00: 00000000 bfcc0010 00000000 bfcc0020 00000000 00000000 00000000 00000000
[ 18.678419] GPR08: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 18.678419] GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 18.678419] GPR24: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 19.044798] NIP [b780d500] 0xb780d500
[ 19.104645] LR [b7828554] 0xb7828554
[ 19.164652] --- interrupt: 300
[ 19.222524] Instruction dump:
[ 19.279658] 3d407265 394a6773 914b0008 39400300 914b00b0 906b001c 908b0020 90ab0024
[ 19.352049] 90cb0028 90eb002c 910b0030 4800fe71 <80ab00b8> 74a00040 4082000c 48014f65
[ 19.424682] ---[ end trace 88a2dc920b595dd1 ]---
[ 19.487214]
[ 20.499171] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 20.571365] Rebooting in 180 seconds..
When testing a recent mainline build, 5.14.0-rc2-pmac-00323-gd8079fac1681,
PID 1 did not crash. Other processes crash instead and the kernel produces
messages like these:
[ 91.150956] xfce4-session[1792]: segfault (11) at 404cd4fc nip a6aed794 lr a6aed930 code 1 in libc-2.31.so[a6aa9000+1ce000]
[ 91.151194] xfce4-session[1792]: code: 2c170000 41820050 83f70004 3bb70008 57ff2036 3bfffff8 7ff7fa14 7c1df840
[ 91.151233] xfce4-session[1792]: code: 41810028 60000000 60000000 41920150 <813f000c> 7c09d800 41820144 3bfffff0
[ 115.700631] xfwm4[1978]: segfault (11) at 766d3243 nip a6c4af84 lr a6e07724 code 1 in libc-2.31.so[a6c0b000+1ce000]
[ 115.700948] xfwm4[1978]: code: 60420000 8121000c 5069063e 9121000c 60420000 c8010008 fdfe058e 38210010
[ 115.700995] xfwm4[1978]: code: 4e800020 7c250b78 80c28ff4 7cc52a78 <90a30000> 7c0802a6 91c3000c d9c30058
We found that reducing memory with the kernel parameter 'mem=464M' would
prevent the crash.
Below are Stan's notes from the 'git bisect' run. They include an
additional failure mode that might be of interest. We've also observed
"Kernel attempted to write user page (c6207c) - exploit attempt?" and
"kernel BUG at arch/powerpc/kernel/interrupt.c:49!".
On Thu, 29 Jul 2021, Stanley J. Johnson wrote:
> Here are the git bisect results (I saved the kernels and dmesg outputs
> in case they're needed later, though it's easy enough to re-create the
> results).
>
> We'll have up to two boots (only one if the first boot fails) for each
> kernel on WS-1 with the default memory setting of 512M.
>
> 1) 5.12.0-pmac-08447-g85f3f17b5db (good)
> -> works: no dmesg errs, X works
> -> works: no dmesg errs, X works
>
> 2) 5.12.0-pmac-12750-g23243c1ace9 (bad)
> (Crash and burn. I was tempted to mark this one "skip", since the errors
> are different, though we've seen them in earlier tests. So there could
> be multiple regressions. But let's keep chasing this one. I can re-run
> the bisect later and skip some failures if necessary.)
> -> fails: "Unable to contact settings server" after wdm login; dmesg errors:
> ...
> [ 127.169294] BUG: Unable to handle kernel instruction fetch (NULL pointer?)
> [ 127.169397] Faulting instruction address: 0x00000000
> [ 127.169635] Oops: Kernel access of bad area, sig: 11 [#2]
> [ 127.169661] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
> [ 127.169696] Modules linked in:
> [ 127.169736] CPU: 0 PID: 1877 Comm: gdbus Tainted: G D 5.12.0-pmac-12750-g23243c1ace9 #9
> [ 127.169776] NIP: 00000000 LR: 00000000 CTR: 00000000
> ...
>
> 3) 5.12.0-rc7-pmac-02335-gaeacb52a8de (good)
> -> works: no dmesg errs, X works
> -> works: no dmesg errs, X works
>
> 4) 5.12.0-pmac-11585-g95275402f66 (bad)
> -> fails: dmesg errs, wdm login fails with "Unable to contact settings
> server..."
> ...
> [ 58.290883] BUG: Unable to handle kernel instruction fetch
> [ 58.291009] Faulting instruction address: 0x7cc903a4
> [ 58.291240] Oops: Kernel access of bad area, sig: 11 [#1]
> [ 58.291268] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
> [ 58.291305] Modules linked in:
> [ 58.291349] CPU: 0 PID: 1750 Comm: Xorg Not tainted 5.12.0-pmac-11585-g95275402f66 #11
> [ 58.291391] NIP: 7cc903a4 LR: 7cc903a6 CTR: c0127eb8
> [ 58.291417] REGS: e2da1e70 TRAP: 0400 Not tainted (5.12.0-pmac-11585-g95275402f66)
> [ 58.291450] MSR: 40001030 <ME,IR,DR> CR: 28008228 XER: 20000000
> ...
>
> 5) 5.12.0-pmac-11068-g9d31d233895 (good)
> -> works: no dmesg errs, X works
> -> works: no dmesg errs, X works
>
> 6) 5.12.0-rc3-pmac-00258-ga9d2f9bb225 (bad)
> -> fails: wdm dies at login, screen hangs, dmesg errs that I haven't
> seen before:
> ...
> [ 59.988732] InputThread[1751]: bad frame in sys_rt_sigreturn: 51a79ab6 nip 001023c8 lr 001023c0
> [ 62.079043] InputThread[1760]: bad frame in sys_rt_sigreturn: a98be235 nip 001023c8 lr 001023c0
> [ 64.348063] InputThread[1776]: bad frame in sys_rt_sigreturn: a46b945e nip 001023c8 lr 001023c0
> [ 66.413980] InputThread[1785]: bad frame in sys_rt_sigreturn: a98be235 nip 001023c8 lr 001023c0
> [ 68.486768] InputThread[1794]: bad frame in sys_rt_sigreturn: 677e693b nip 001023c8 lr 001023c0
>
> 7) 5.12.0-rc3-pmac-00129-g036fc2cb1dc (bad)
> -> fails: dmesg errs, wdm hangs (wdm did not crash, screen seems hung)
> ...
> [ 101.136941] BUG: Unable to handle kernel instruction fetch
> [ 101.137059] Faulting instruction address: 0xfea31f74
> [ 101.137296] Oops: Kernel access of bad area, sig: 11 [#1]
> [ 101.137323] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
> [ 101.137358] Modules linked in:
> [ 101.137401] CPU: 0 PID: 1882 Comm: xfce4-session Not tainted 5.12.0-rc3-pmac-00129-g036fc2cb1dc #14
> [ 101.137443] NIP: fea31f74 LR: fea31f74 CTR: c00cfef4
> [ 101.137470] REGS: e2e21e70 TRAP: 0400 Not tainted (5.12.0-rc3-pmac-00129-g036fc2cb1dc)
> [ 101.137502] MSR: 40001030 <ME,IR,DR> CR: 220084e8 XER: 00000000
> ...
>
> 8) 5.12.0-rc3-pmac-00064-g719e7e212c7 (good)
> -> works: no dmesg errs, X works
> -> works: no dmesg errs, X works
>
> 9) 5.12.0-rc3-pmac-00096-ga2308836880 (bad)
> -> fails: dmesg errs, wdm hangs while validating login
> ...
> [ 104.559951] BUG: Unable to handle kernel instruction fetch
> [ 104.560086] Faulting instruction address: 0xfe988ba4
> [ 104.560307] Oops: Kernel access of bad area, sig: 11 [#1]
> [ 104.560337] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
> [ 104.560371] Modules linked in:
> [ 104.560415] CPU: 0 PID: 1834 Comm: xfce4-session Not tainted 5.12.0-rc3-pmac-00096-ga2308836880 #16
> [ 104.560457] NIP: fe988ba4 LR: fe988ba4 CTR: c00cfee8
> [ 104.560484] REGS: e2d9de70 TRAP: 0400 Not tainted (5.12.0-rc3-pmac-00096-ga2308836880)
> [ 104.560517] MSR: 40001030 <ME,IR,DR> CR: 220484e8 XER: 00000000
> ...
> [ 114.371853] BUG: Unable to handle kernel instruction fetch
> [ 114.371998] Faulting instruction address: 0x3e62a270
> [ 114.372270] Oops: Kernel access of bad area, sig: 11 [#2]
> [ 114.372298] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
> [ 114.372334] Modules linked in:
> [ 114.372382] CPU: 0 PID: 1858 Comm: xfwm4 Tainted: G D 5.12.0-rc3-pmac-00096-ga2308836880 #16
> [ 114.372425] NIP: 3e62a270 LR: 3e62a271 CTR: c065eebc
> [ 114.372452] REGS: e2dede70 TRAP: 0400 Tainted: G D (5.12.0-rc3-pmac-00096-ga2308836880)
> [ 114.372486] MSR: 40001030 <ME,IR,DR> CR: 22002284 XER: 00000000
> ...
>
> 10) 5.12.0-rc3-pmac-00080-g7a7d744ffe8 (bad)
> -> fails: dmesg errs, "Unable to contact settings server..."
> ...
> [ 170.622408] BUG: Unable to handle kernel instruction fetch
> [ 170.622546] Faulting instruction address: 0xfe9255d4
> [ 170.622777] Oops: Kernel access of bad area, sig: 11 [#1]
> [ 170.622806] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
> [ 170.622841] Modules linked in:
> [ 170.622885] CPU: 0 PID: 1863 Comm: xfce4-session Not tainted 5.12.0-rc3-pmac-00080-g7a7d744ffe8 #17
> [ 170.622927] NIP: fe9255d4 LR: fe9255d4 CTR: c00cfee8
> [ 170.622954] REGS: e2da1e70 TRAP: 0400 Not tainted (5.12.0-rc3-pmac-00080-g7a7d744ffe8)
> [ 170.622987] MSR: 40001030 <ME,IR,DR> CR: 220484e8 XER: 00000000
> ...
> [ 172.611235] BUG: Unable to handle kernel instruction fetch (NULL pointer?)
> [ 172.611364] Faulting instruction address: 0x00000000
> [ 172.611662] Oops: Kernel access of bad area, sig: 11 [#2]
> [ 172.611690] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
> [ 172.611725] Modules linked in:
> [ 172.611773] CPU: 0 PID: 1871 Comm: gmain Tainted: G D 5.12.0-rc3-pmac-00080-g7a7d744ffe8 #17
> [ 172.611814] NIP: 00000000 LR: 00000000 CTR: 00000000
> [ 172.611840] REGS: e2db9e70 TRAP: 0400 Tainted: G D (5.12.0-rc3-pmac-00080-g7a7d744ffe8)
> [ 172.611874] MSR: 40001030 <ME,IR,DR> CR: 28008468 XER: 00000000
> ...
>
> 11) 5.12.0-rc3-pmac-00072-ga2b3e09ae41 (bad)
> -> fails: kernel panic, I'd have to capture the output via a serial console
>
> 12) 5.12.0-rc3-pmac-00068-gacc142b6230 (bad)
> -> fails: kernel panic
>
> 13) 5.12.0-rc3-pmac-00066-g8f6ff5bd9b7 (good)
> -> works: no dmesg errs, X works
> -> works: no dmesg errs, X works
>
> 14) 5.12.0-rc3-pmac-00067-g4c0104a83fc (bad)
> -> fails: kernel panic
>
> The git bisect thinks this is the bad commit, but I'm not sure it means
> anything at all:
>
> -----
>
> 4c0104a83fc3990a76a01a2f4e504251fa9814c4 is the first bad commit
WARNING: multiple messages have this Message-ID (diff)
From: Finn Thain <fthain@linux-m68k.org>
To: Christophe Leroy <christophe.leroy@csgroup.eu>,
Stan Johnson <userm57@yahoo.com>
Cc: linux-kernel@vger.kernel.org, Nick Piggin <npiggin@gmail.com>,
Paul Mackerras <paulus@samba.org>,
linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH v3 31/41] powerpc/32: Dismantle EXC_XFER_STD/LITE/TEMPLATE
Date: Sat, 31 Jul 2021 20:12:22 +1000 (AEST) [thread overview]
Message-ID: <666e3ab4-372-27c2-4621-7cc3933756dd@linux-m68k.org> (raw)
In-Reply-To: <ca5795d04a220586b7037dbbbe6951dfa9e768eb.1615552867.git.christophe.leroy@csgroup.eu>
Hi Christophe,
On Fri, 12 Mar 2021, Christophe Leroy wrote:
> In order to get more control in exception prolog, dismantle all non
> standard exception macros, finishing with EXC_XFER_STD and EXC_XFER_LITE
> and EXC_XFER_TEMPLATE.
>
> Also remove transfer_to_handler_full and ret_from_except and
> ret_from_except_full as they are not used anymore.
>
> Last parameter of EXCEPTION() is now ignored, will be removed in a later
> patch to avoid too much churn.
>
> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> ---
> arch/powerpc/kernel/entry_32.S | 42 +-----------------------
> arch/powerpc/kernel/head_32.h | 21 ++++--------
> arch/powerpc/kernel/head_40x.S | 33 ++++++++++++-------
> arch/powerpc/kernel/head_8xx.S | 12 +++++--
> arch/powerpc/kernel/head_book3s_32.S | 27 ++++++++++-----
> arch/powerpc/kernel/head_booke.h | 49 +++++++++++++++-------------
> arch/powerpc/kernel/head_fsl_booke.S | 14 +++++---
> 7 files changed, 92 insertions(+), 106 deletions(-)
>
Stan Johnson contacted me about a regression in mainline that he observed
on his G3 Powerbooks. Using 'git bisect' we determined that this patch was
the cause of the regression, i.e. commit 4c0104a83fc3 ("powerpc/32:
Dismantle EXC_XFER_STD/LITE/TEMPLATE").
When testing 4c0104a83fc and all subsequent builds, various user processes
were liable to segfault. Here is the console log that Stan provided:
[ 0.000000] printk: debug: ignoring loglevel setting.
[ 0.000000] Total memory = 512MB; using 1024kB for hash table
[ 0.000000] Activating Kernel Userspace Execution Prevention
[ 0.000000] Activating Kernel Userspace Access Protection
[ 0.000000] Linux version 5.12.0-rc3-pmac-00067-g4c0104a83fc (johnson@ThinkPad) (powerpc-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #22 SMP Fri Jul 30 12:15:00 MDT 2021
[ 0.000000] ioremap() called early from probe_one_macio+0x130/0x268. Use early_ioremap() instead
[ 0.000000] Found a Gatwick mac-io controller, rev: 0, mapped at 0x(ptrval)
[ 0.000000] ioremap() called early from probe_one_macio+0x130/0x268. Use early_ioremap() instead
[ 0.000000] Found a Heathrow mac-io controller, rev: 0, mapped at 0x(ptrval)
[ 0.000000] PowerMac motherboard: PowerBook Wallstreet
[ 0.000000] ioremap() called early from find_via_pmu+0x244/0x56c. Use early_ioremap() instead
[ 0.000000] PMU driver v2 initialized for PowerBook G3 Series, firmware: 0a
[ 0.000000] Using PowerMac machine description
[ 0.000000] printk: bootconsole [udbg0] enabled
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] -----------------------------------------------------
[ 0.000000] phys_mem_size = 0x20000000
[ 0.000000] dcache_bsize = 0x20
[ 0.000000] icache_bsize = 0x20
[ 0.000000] cpu_features = 0x000000000501a008
[ 0.000000] possible = 0x00000000277de14a
[ 0.000000] always = 0x0000000001000000
[ 0.000000] cpu_user_features = 0x8c000001 0x00000000
[ 0.000000] mmu_features = 0x00000001
[ 0.000000] Hash_size = 0x100000
[ 0.000000] Hash_mask = 0x3fff
[ 0.000000] -----------------------------------------------------
[ 0.000000] ioremap() called early from pmac_setup_arch+0x10c/0x294. Use early_ioremap() instead
[ 0.000000] nvram: OF partition at 0x1800
[ 0.000000] nvram: XP partition at 0x1300
[ 0.000000] nvram: NR partition at 0x1400
[ 0.000000] Top of RAM: 0x20000000, Total RAM: 0x20000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] DMA zone: 1024 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 131072 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 13 pages/cpu s21644 r8192 d23412 u53248
[ 0.000000] pcpu-alloc: s21644 r8192 d23412 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: root=/dev/sda12 console=ttyS0 console=tty printk.time earlyprintk ignore_loglevel video=ofonly
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 498908K/524288K available (6756K kernel code, 352K rwdata, 1276K rodata, 1232K init, 176K bss, 25380K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xffbbf000..0xfffff000 : fixmap
[ 0.000000] * 0xff400000..0xff800000 : highmem PTEs
[ 0.000000] * 0xff2fd000..0xff400000 : early ioremap
[ 0.000000] * 0xe1000000..0xff2fd000 : vmalloc & ioremap
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] irq: Found primary Apple PIC /pci/mac-io for 64 irqs
[ 0.000000] irq: Found slave Apple PIC /pci/mac-io for 64 irqs cascade: 27
[ 0.000000] irq: System has 128 possible interrupts
[ 0.000000] GMT Delta read from XPRAM: -360 minutes, DST: on
[ 0.000000] random: get_random_u32 called from start_kernel+0x36c/0x4d8 with crng_init=0
[ 0.000000] time_init: decrementer frequency = 16.671650 MHz
[ 0.000000] time_init: processor frequency = 264.000000 MHz
[ 0.000038] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x3d85178a6, max_idle_ns: 440795202430 ns
[ 0.000097] clocksource: timebase mult[3bfb68a3] shift[24] registered
[ 0.000201] clockevent: decrementer mult[44497e0] shift[32] cpu[0]
[ 0.001368] Console: colour dummy device 80x25
[ 0.001436] printk: console [tty0] enabled
[ 0.001487] printk: bootconsole [udbg0] disabled
[ 0.001882] pmac_zilog: serial modem detected
[ 1.345729] printk: console [ttyS0] enabled
[ 1.358329] pid_max: default: 32768 minimum: 301
[ 1.372599] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 1.394156] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 1.422118] rcu: Hierarchical SRCU implementation.
[ 1.437119] smp: Bringing up secondary CPUs ...
[ 1.450268] smp: Brought up 1 node, 1 CPU
[ 1.463448] devtmpfs: initialized
[ 1.473485] Duplicate name in PowerPC,750, renamed to "l2-cache#1"
[ 1.494492] Duplicate name in pci, renamed to "mac-io#1"
[ 1.511648] Duplicate name in pci, renamed to "pccard#1"
[ 1.530211] Found Grackle (MPC106) PCI host bridge at 0x0000000080000000. Firmware bus number: 0->0
[ 1.556990] PCI host bridge /pci (primary) ranges:
[ 1.571383] IO 0x00000000fe000000..0x00000000fe7fffff -> 0x0000000000000000
[ 1.593309] MEM 0x00000000fd000000..0x00000000fdffffff -> 0x0000000000000000
[ 1.614579] MEM 0x0000000080000000..0x00000000fcffffff -> 0x0000000080000000
[ 1.637120] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 1.667441] futex hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 1.688431] NET: Registered protocol family 16
[ 1.707910] PMU i2c /pci/mac-io/via-pmu
[ 1.722983] channel 1 bus <multibus>
[ 1.733605] channel 2 bus <multibus>
[ 1.746841] PCI: Probing PCI hardware
[ 1.761155] PCI host bridge to bus 0000:00
[ 1.773432] pci_bus 0000:00: root bus resource [io 0x0000-0x7fffff]
[ 1.792247] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfdffffff] (bus address [0x00000000-0x00ffffff])
[ 1.822825] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffff]
[ 1.843419] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.859881] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 1.879871] pci 0000:00:00.0: [1057:0002] type 00 class 0x060000
[ 1.899189] pci 0000:00:0d.0: [106b:0017] type 00 class 0xff0000
[ 1.916838] pci 0000:00:0d.0: reg 0x10: [mem 0xf4000000-0xf407ffff]
[ 1.936859] pci 0000:00:10.0: [106b:0017] type 00 class 0xff0000
[ 1.954533] pci 0000:00:10.0: reg 0x10: [mem 0xf3000000-0xf307ffff]
[ 1.974637] pci 0000:00:11.0: [1002:4c50] type 00 class 0x038000
[ 1.992312] pci 0000:00:11.0: reg 0x10: [mem 0x82000000-0x82ffffff]
[ 2.011110] pci 0000:00:11.0: reg 0x14: [io 0x0400-0x04ff]
[ 2.027818] pci 0000:00:11.0: reg 0x18: [mem 0x82fff000-0x82ffffff]
[ 2.046665] pci 0000:00:11.0: reg 0x30: [mem 0xfd000000-0xfd01ffff pref]
[ 2.066830] pci 0000:00:11.0: supports D1 D2
[ 2.080778] pci 0000:00:13.0: [104c:ac15] type 02 class 0x060700
[ 2.098478] pci 0000:00:13.0: reg 0x10: [mem 0x81803000-0x81803fff]
[ 2.118276] pci 0000:00:13.1: [104c:ac15] type 02 class 0x060700
[ 2.135978] pci 0000:00:13.1: reg 0x10: [mem 0x81802000-0x81802fff]
[ 2.156532] pci_bus 0000:01: extended config space not accessible
[ 2.175227] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 04
[ 2.195189] pci_bus 0000:05: extended config space not accessible
[ 2.213538] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 08
[ 2.233067] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 08
[ 2.253708] PCI: Cannot allocate resource region 2 of device 0000:00:11.0, will remap
[ 2.277131] PCI 0000:00 Cannot reserve Legacy IO [io 0x0000-0x0fff]
[ 2.296121] pci 0000:00:13.0: BAR 9: assigned [mem 0x84000000-0x87ffffff pref]
[ 2.317651] pci 0000:00:13.0: BAR 10: assigned [mem 0x88000000-0x8bffffff]
[ 2.338269] pci 0000:00:13.1: BAR 9: assigned [mem 0x8c000000-0x8fffffff pref]
[ 2.359955] pci 0000:00:13.1: BAR 10: assigned [mem 0x90000000-0x93ffffff]
[ 2.380606] pci 0000:00:11.0: BAR 6: assigned [mem 0xfd000000-0xfd01ffff pref]
[ 2.402311] pci 0000:00:11.0: BAR 2: assigned [mem 0xfd020000-0xfd020fff]
[ 2.422704] pci 0000:00:13.0: BAR 7: assigned [io 0x1000-0x10ff]
[ 2.441000] pci 0000:00:13.0: BAR 8: assigned [io 0x1100-0x11ff]
[ 2.459300] pci 0000:00:13.1: BAR 7: assigned [io 0x1200-0x12ff]
[ 2.477600] pci 0000:00:13.1: BAR 8: assigned [io 0x1300-0x13ff]
[ 2.495919] pci 0000:00:13.0: CardBus bridge to [bus 01-04]
[ 2.512627] pci 0000:00:13.0: bridge window [io 0x1000-0x10ff]
[ 2.530925] pci 0000:00:13.0: bridge window [io 0x1100-0x11ff]
[ 2.549229] pci 0000:00:13.0: bridge window [mem 0x84000000-0x87ffffff pref]
[ 2.570928] pci 0000:00:13.0: bridge window [mem 0x88000000-0x8bffffff]
[ 2.591320] pci 0000:00:13.1: CardBus bridge to [bus 05-08]
[ 2.608046] pci 0000:00:13.1: bridge window [io 0x1200-0x12ff]
[ 2.626349] pci 0000:00:13.1: bridge window [io 0x1300-0x13ff]
[ 2.644651] pci 0000:00:13.1: bridge window [mem 0x8c000000-0x8fffffff pref]
[ 2.666350] pci 0000:00:13.1: bridge window [mem 0x90000000-0x93ffffff]
[ 2.686748] pci_bus 0000:00: resource 4 [io 0x0000-0x7fffff]
[ 2.703993] pci_bus 0000:00: resource 5 [mem 0xfd000000-0xfdffffff]
[ 2.722816] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffff]
[ 2.741641] pci_bus 0000:01: resource 0 [io 0x1000-0x10ff]
[ 2.758373] pci_bus 0000:01: resource 1 [io 0x1100-0x11ff]
[ 2.775105] pci_bus 0000:01: resource 2 [mem 0x84000000-0x87ffffff pref]
[ 2.795235] pci_bus 0000:01: resource 3 [mem 0x88000000-0x8bffffff]
[ 2.814059] pci_bus 0000:05: resource 0 [io 0x1200-0x12ff]
[ 2.830791] pci_bus 0000:05: resource 1 [io 0x1300-0x13ff]
[ 2.847523] pci_bus 0000:05: resource 2 [mem 0x8c000000-0x8fffffff pref]
[ 2.867653] pci_bus 0000:05: resource 3 [mem 0x90000000-0x93ffffff]
[ 3.004865] vgaarb: loaded
[ 3.015684] SCSI subsystem initialized
[ 3.028576] libata version 3.00 loaded.
[ 3.041525] usbcore: registered new interface driver usbfs
[ 3.058590] usbcore: registered new interface driver hub
[ 3.074722] usbcore: registered new device driver usb
[ 3.097574] clocksource: Switched to clocksource timebase
[ 3.176945] NET: Registered protocol family 2
[ 3.196269] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 3.221544] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 3.244755] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 3.266467] TCP: Hash tables configured (established 4096 bind 4096)
[ 3.285534] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 3.305032] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 3.326164] NET: Registered protocol family 1
[ 3.339985] RPC: Registered named UNIX socket transport module.
[ 3.357356] RPC: Registered udp transport module.
[ 3.371459] RPC: Registered tcp transport module.
[ 3.385564] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.405111] PCI: CLS 32 bytes, default 32
[ 3.418590] Thermal assist unit using workqueue, shrink_timer: 2000 ms
[ 3.444637] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 3.465435] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.484342] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.506233] io scheduler mq-deadline registered
[ 3.521141] pci 0000:00:11.0: enabling device (0086 -> 0087)
[ 3.537885] Using unsupported 1024x768 (null) at 82801000, depth=32, pitch=4096
[ 3.682913] Console: switching to colour frame buffer device 128x48
[ 3.823127] fb0: Open Firmware frame buffer device on /pci/ATY,RageLTPro
[ 3.845192] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 3.869499] Non-volatile memory driver v1.3
[ 3.893598] brd: module loaded
[ 3.931206] loop: module loaded
[ 3.942363] MacIO PCI driver attached to Gatwick chipset
[ 3.959805] MacIO PCI driver attached to Heathrow chipset
[ 3.986647] swim3 0.00015000:floppy: [fd0] SWIM3 floppy controller in media bay
[ 4.015851] 0.00013020:ch-a: ttyS0 at MMIO 0xf3013020 (irq = 16, base_baud = 230400) is a Z85c30 ESCC - Serial port
[ 4.052300] 0.00013000:ch-b: ttyS1 at MMIO 0xf3013000 (irq = 17, base_baud = 230400) is a Z85c30 ESCC - Infrared port
[ 4.090256] macio: fixed media-bay irq on gatwick
[ 4.107695] macio: fixed left floppy irqs
[ 4.121515] swim3 1.00015000:floppy: [fd1] Couldn't request interrupt
[ 4.142797] swim3: probe of 1.00015000:floppy failed with error -16
[ 4.163133] macio: fixed left ide irqs
[ 4.175485] macio: fixed SCC irqs on gatwick
[ 4.189655] 1.00013020:ch-a: ttyS2 at MMIO 0xf4013020 (irq = 79, base_baud = 230400) is a Z85c30 ESCC - Internal modem
[ 4.226442] mediabay0: Registered Heathrow media-bay
[ 4.455126] mediabay1: Registered Heathrow media-bay
[ 4.686271] PMU Backlight initialized (pmubl)
[ 4.703522] mesh: configured for synchronous 5 MB/s
[ 4.719262] mediabay1: Bay contains a floppy drive
[ 4.954580] mesh: performing initial bus reset...
[ 6.861383] random: fast init done
[ 6.976730] adb device [2]: 2 0xC3
[ 7.044008] adb device [3]: 3 0x1
[ 7.107927] adb device [7]: 7 0x1F
[ 7.181591] ADB keyboard at 2 has handler 0xC3
[ 7.244084] Detected ADB keyboard, type ANSI.
[ 7.306604] input: ADB keyboard as /devices/virtual/input/input0
[ 7.374680] input: ADB Powerbook buttons as /devices/virtual/input/input1
[ 7.509364] ADB mouse (trackpad) at 3 has handler 0x4
[ 7.573745] input: ADB mouse as /devices/virtual/input/input2
[ 9.034624] scsi host0: MESH
[ 12.394536] pata-macio 0.00020000:ata0: Activating pata-macio chipset Heathrow ATA, Apple bus ID 0
[ 12.477627] scsi host1: pata_macio
[ 12.540331] ata1: PATA max MWDMA2 irq 30
[ 12.795027] ata1.00: ATA-7: SAMSUNG HM100JC, YN100-08, max UDMA/100
[ 12.865009] ata1.00: 195371568 sectors, multi 8: LBA48
[ 12.935050] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HM100JC 0-08 PQ: 0 ANSI: 5
[ 13.013610] sd 1:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.2 GiB)
[ 13.088556] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 13.158582] sd 1:0:0:0: [sda] Write Protect is off
[ 13.223470] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 13.289075] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 13.674503] pata-macio 0.00021000:ata1: Activating pata-macio chipset Heathrow ATA, Apple bus ID 1
[ 13.757042] scsi host2: pata_macio
[ 13.819249] ata2: PATA max MWDMA2 irq 36
[ 13.904489] pata-macio 1.00021000:ata4: Activating pata-macio chipset Heathrow ATA, Apple bus ID 4
[ 13.983164] genirq: Flags mismatch irq 36. 00000000 (pata-macio[1.00021000:ata4]) vs. 00000000 (pata-macio[0.00021000:ata1])
[ 14.070207] pata-macio: probe of 1.00021000:ata4 failed with error -16
[ 14.479032] eth0: BMAC at 00:05:02:07:5a:a6
[ 14.479077]
[ 14.615187] aoe: AoE v85 initialised.
[ 14.679798] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 14.753685] ehci-pci: EHCI PCI platform driver
[ 14.820303] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 14.893038] ohci-pci: OHCI PCI platform driver
[ 14.959871] usbcore: registered new interface driver uas
[ 15.029671] usbcore: registered new interface driver usb-storage
[ 15.104150] mousedev: PS/2 mouse device common for all mice
[ 15.178852] rtc-generic rtc-generic: registered as rtc0
[ 15.248707] i2c /dev entries driver
[ 15.313358] PowerMac i2c bus pmu 2 registered
[ 15.379651] PowerMac i2c bus pmu 1 registered
[ 15.450539] usbcore: registered new interface driver usbhid
[ 15.517786] usbhid: USB HID core driver
[ 15.581161] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15
[ 15.682021] sd 1:0:0:0: [sda] Attached SCSI disk
[ 15.748688] NET: Registered protocol family 17
[ 15.815278] drmem: No dynamic reconfiguration memory found
[ 15.905030] EXT4-fs (sda12): mounting ext3 file system using the ext4 subsystem
[ 16.093352] EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[ 16.177770] VFS: Mounted root (ext3 filesystem) readonly on device 8:12.
[ 16.267681] Freeing unused kernel memory: 1232K
[ 16.337890] Kernel memory protection not selected by kernel config.
[ 16.413504] Run /sbin/init as init process
[ 16.481986] with arguments:
[ 16.546360] /sbin/init
[ 16.609020] earlyprintk
[ 16.671224] with environment:
[ 16.733922] HOME=/
[ 16.792877] TERM=linux
[ 17.149488] BUG: Unable to handle kernel data access on read at 0x5071b5f4
[ 17.222336] Faulting instruction address: 0xc0004194
[ 17.289513] Oops: Kernel access of bad area, sig: 11 [#1]
[ 17.357646] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
[ 17.426007] Modules linked in:
[ 17.485807] CPU: 0 PID: 1 Comm: init Not tainted 5.12.0-rc3-pmac-00067-g4c0104a83fc #22
[ 17.561902] NIP: c0004194 LR: c0004194 CTR: 00000000
[ 17.629263] REGS: e1025e70 TRAP: 0300 Not tainted (5.12.0-rc3-pmac-00067-g4c0104a83fc)
[ 17.707694] MSR: 00001032 <ME,IR,DR,RI> CR: 40025f30 XER: 00000000
[ 17.780835] DAR: 5071b5f4 DSISR: 40000000
[ 17.780835] GPR00: 00000000 e1025f30 c14432e0 e1025f40 00000000 00000000 00000000 00000000
[ 17.780835] GPR08: 00000000 0000d032 00000300 5071b53c c0000000 00000000 00000000 00000000
[ 17.780835] GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 17.780835] GPR24: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 18.155821] NIP [c0004194] DataAccess_virt+0x8c/0xac
[ 18.218757] LR [c0004194] DataAccess_virt+0x8c/0xac
[ 18.281072] Call Trace:
[ 18.335751] [e1025f30] [c0004240] InstructionAccess_virt+0x8c/0x90 (unreliable)
[ 18.407057] --- interrupt: 300 at 0xb780d500
[ 18.468711] NIP: b780d500 LR: b7828554 CTR: 00000000
[ 18.532657] REGS: e1025f40 TRAP: 0300 Not tainted (5.12.0-rc3-pmac-00067-g4c0104a83fc)
[ 18.607221] MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 00000000 XER: 00000000
[ 18.678419] DAR: bfcbfd50 DSISR: 42000000
[ 18.678419] GPR00: 00000000 bfcc0010 00000000 bfcc0020 00000000 00000000 00000000 00000000
[ 18.678419] GPR08: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 18.678419] GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 18.678419] GPR24: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 19.044798] NIP [b780d500] 0xb780d500
[ 19.104645] LR [b7828554] 0xb7828554
[ 19.164652] --- interrupt: 300
[ 19.222524] Instruction dump:
[ 19.279658] 3d407265 394a6773 914b0008 39400300 914b00b0 906b001c 908b0020 90ab0024
[ 19.352049] 90cb0028 90eb002c 910b0030 4800fe71 <80ab00b8> 74a00040 4082000c 48014f65
[ 19.424682] ---[ end trace 88a2dc920b595dd1 ]---
[ 19.487214]
[ 20.499171] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 20.571365] Rebooting in 180 seconds..
When testing a recent mainline build, 5.14.0-rc2-pmac-00323-gd8079fac1681,
PID 1 did not crash. Other processes crash instead and the kernel produces
messages like these:
[ 91.150956] xfce4-session[1792]: segfault (11) at 404cd4fc nip a6aed794 lr a6aed930 code 1 in libc-2.31.so[a6aa9000+1ce000]
[ 91.151194] xfce4-session[1792]: code: 2c170000 41820050 83f70004 3bb70008 57ff2036 3bfffff8 7ff7fa14 7c1df840
[ 91.151233] xfce4-session[1792]: code: 41810028 60000000 60000000 41920150 <813f000c> 7c09d800 41820144 3bfffff0
[ 115.700631] xfwm4[1978]: segfault (11) at 766d3243 nip a6c4af84 lr a6e07724 code 1 in libc-2.31.so[a6c0b000+1ce000]
[ 115.700948] xfwm4[1978]: code: 60420000 8121000c 5069063e 9121000c 60420000 c8010008 fdfe058e 38210010
[ 115.700995] xfwm4[1978]: code: 4e800020 7c250b78 80c28ff4 7cc52a78 <90a30000> 7c0802a6 91c3000c d9c30058
We found that reducing memory with the kernel parameter 'mem=464M' would
prevent the crash.
Below are Stan's notes from the 'git bisect' run. They include an
additional failure mode that might be of interest. We've also observed
"Kernel attempted to write user page (c6207c) - exploit attempt?" and
"kernel BUG at arch/powerpc/kernel/interrupt.c:49!".
On Thu, 29 Jul 2021, Stanley J. Johnson wrote:
> Here are the git bisect results (I saved the kernels and dmesg outputs
> in case they're needed later, though it's easy enough to re-create the
> results).
>
> We'll have up to two boots (only one if the first boot fails) for each
> kernel on WS-1 with the default memory setting of 512M.
>
> 1) 5.12.0-pmac-08447-g85f3f17b5db (good)
> -> works: no dmesg errs, X works
> -> works: no dmesg errs, X works
>
> 2) 5.12.0-pmac-12750-g23243c1ace9 (bad)
> (Crash and burn. I was tempted to mark this one "skip", since the errors
> are different, though we've seen them in earlier tests. So there could
> be multiple regressions. But let's keep chasing this one. I can re-run
> the bisect later and skip some failures if necessary.)
> -> fails: "Unable to contact settings server" after wdm login; dmesg errors:
> ...
> [ 127.169294] BUG: Unable to handle kernel instruction fetch (NULL pointer?)
> [ 127.169397] Faulting instruction address: 0x00000000
> [ 127.169635] Oops: Kernel access of bad area, sig: 11 [#2]
> [ 127.169661] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
> [ 127.169696] Modules linked in:
> [ 127.169736] CPU: 0 PID: 1877 Comm: gdbus Tainted: G D 5.12.0-pmac-12750-g23243c1ace9 #9
> [ 127.169776] NIP: 00000000 LR: 00000000 CTR: 00000000
> ...
>
> 3) 5.12.0-rc7-pmac-02335-gaeacb52a8de (good)
> -> works: no dmesg errs, X works
> -> works: no dmesg errs, X works
>
> 4) 5.12.0-pmac-11585-g95275402f66 (bad)
> -> fails: dmesg errs, wdm login fails with "Unable to contact settings
> server..."
> ...
> [ 58.290883] BUG: Unable to handle kernel instruction fetch
> [ 58.291009] Faulting instruction address: 0x7cc903a4
> [ 58.291240] Oops: Kernel access of bad area, sig: 11 [#1]
> [ 58.291268] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
> [ 58.291305] Modules linked in:
> [ 58.291349] CPU: 0 PID: 1750 Comm: Xorg Not tainted 5.12.0-pmac-11585-g95275402f66 #11
> [ 58.291391] NIP: 7cc903a4 LR: 7cc903a6 CTR: c0127eb8
> [ 58.291417] REGS: e2da1e70 TRAP: 0400 Not tainted (5.12.0-pmac-11585-g95275402f66)
> [ 58.291450] MSR: 40001030 <ME,IR,DR> CR: 28008228 XER: 20000000
> ...
>
> 5) 5.12.0-pmac-11068-g9d31d233895 (good)
> -> works: no dmesg errs, X works
> -> works: no dmesg errs, X works
>
> 6) 5.12.0-rc3-pmac-00258-ga9d2f9bb225 (bad)
> -> fails: wdm dies at login, screen hangs, dmesg errs that I haven't
> seen before:
> ...
> [ 59.988732] InputThread[1751]: bad frame in sys_rt_sigreturn: 51a79ab6 nip 001023c8 lr 001023c0
> [ 62.079043] InputThread[1760]: bad frame in sys_rt_sigreturn: a98be235 nip 001023c8 lr 001023c0
> [ 64.348063] InputThread[1776]: bad frame in sys_rt_sigreturn: a46b945e nip 001023c8 lr 001023c0
> [ 66.413980] InputThread[1785]: bad frame in sys_rt_sigreturn: a98be235 nip 001023c8 lr 001023c0
> [ 68.486768] InputThread[1794]: bad frame in sys_rt_sigreturn: 677e693b nip 001023c8 lr 001023c0
>
> 7) 5.12.0-rc3-pmac-00129-g036fc2cb1dc (bad)
> -> fails: dmesg errs, wdm hangs (wdm did not crash, screen seems hung)
> ...
> [ 101.136941] BUG: Unable to handle kernel instruction fetch
> [ 101.137059] Faulting instruction address: 0xfea31f74
> [ 101.137296] Oops: Kernel access of bad area, sig: 11 [#1]
> [ 101.137323] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
> [ 101.137358] Modules linked in:
> [ 101.137401] CPU: 0 PID: 1882 Comm: xfce4-session Not tainted 5.12.0-rc3-pmac-00129-g036fc2cb1dc #14
> [ 101.137443] NIP: fea31f74 LR: fea31f74 CTR: c00cfef4
> [ 101.137470] REGS: e2e21e70 TRAP: 0400 Not tainted (5.12.0-rc3-pmac-00129-g036fc2cb1dc)
> [ 101.137502] MSR: 40001030 <ME,IR,DR> CR: 220084e8 XER: 00000000
> ...
>
> 8) 5.12.0-rc3-pmac-00064-g719e7e212c7 (good)
> -> works: no dmesg errs, X works
> -> works: no dmesg errs, X works
>
> 9) 5.12.0-rc3-pmac-00096-ga2308836880 (bad)
> -> fails: dmesg errs, wdm hangs while validating login
> ...
> [ 104.559951] BUG: Unable to handle kernel instruction fetch
> [ 104.560086] Faulting instruction address: 0xfe988ba4
> [ 104.560307] Oops: Kernel access of bad area, sig: 11 [#1]
> [ 104.560337] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
> [ 104.560371] Modules linked in:
> [ 104.560415] CPU: 0 PID: 1834 Comm: xfce4-session Not tainted 5.12.0-rc3-pmac-00096-ga2308836880 #16
> [ 104.560457] NIP: fe988ba4 LR: fe988ba4 CTR: c00cfee8
> [ 104.560484] REGS: e2d9de70 TRAP: 0400 Not tainted (5.12.0-rc3-pmac-00096-ga2308836880)
> [ 104.560517] MSR: 40001030 <ME,IR,DR> CR: 220484e8 XER: 00000000
> ...
> [ 114.371853] BUG: Unable to handle kernel instruction fetch
> [ 114.371998] Faulting instruction address: 0x3e62a270
> [ 114.372270] Oops: Kernel access of bad area, sig: 11 [#2]
> [ 114.372298] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
> [ 114.372334] Modules linked in:
> [ 114.372382] CPU: 0 PID: 1858 Comm: xfwm4 Tainted: G D 5.12.0-rc3-pmac-00096-ga2308836880 #16
> [ 114.372425] NIP: 3e62a270 LR: 3e62a271 CTR: c065eebc
> [ 114.372452] REGS: e2dede70 TRAP: 0400 Tainted: G D (5.12.0-rc3-pmac-00096-ga2308836880)
> [ 114.372486] MSR: 40001030 <ME,IR,DR> CR: 22002284 XER: 00000000
> ...
>
> 10) 5.12.0-rc3-pmac-00080-g7a7d744ffe8 (bad)
> -> fails: dmesg errs, "Unable to contact settings server..."
> ...
> [ 170.622408] BUG: Unable to handle kernel instruction fetch
> [ 170.622546] Faulting instruction address: 0xfe9255d4
> [ 170.622777] Oops: Kernel access of bad area, sig: 11 [#1]
> [ 170.622806] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
> [ 170.622841] Modules linked in:
> [ 170.622885] CPU: 0 PID: 1863 Comm: xfce4-session Not tainted 5.12.0-rc3-pmac-00080-g7a7d744ffe8 #17
> [ 170.622927] NIP: fe9255d4 LR: fe9255d4 CTR: c00cfee8
> [ 170.622954] REGS: e2da1e70 TRAP: 0400 Not tainted (5.12.0-rc3-pmac-00080-g7a7d744ffe8)
> [ 170.622987] MSR: 40001030 <ME,IR,DR> CR: 220484e8 XER: 00000000
> ...
> [ 172.611235] BUG: Unable to handle kernel instruction fetch (NULL pointer?)
> [ 172.611364] Faulting instruction address: 0x00000000
> [ 172.611662] Oops: Kernel access of bad area, sig: 11 [#2]
> [ 172.611690] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
> [ 172.611725] Modules linked in:
> [ 172.611773] CPU: 0 PID: 1871 Comm: gmain Tainted: G D 5.12.0-rc3-pmac-00080-g7a7d744ffe8 #17
> [ 172.611814] NIP: 00000000 LR: 00000000 CTR: 00000000
> [ 172.611840] REGS: e2db9e70 TRAP: 0400 Tainted: G D (5.12.0-rc3-pmac-00080-g7a7d744ffe8)
> [ 172.611874] MSR: 40001030 <ME,IR,DR> CR: 28008468 XER: 00000000
> ...
>
> 11) 5.12.0-rc3-pmac-00072-ga2b3e09ae41 (bad)
> -> fails: kernel panic, I'd have to capture the output via a serial console
>
> 12) 5.12.0-rc3-pmac-00068-gacc142b6230 (bad)
> -> fails: kernel panic
>
> 13) 5.12.0-rc3-pmac-00066-g8f6ff5bd9b7 (good)
> -> works: no dmesg errs, X works
> -> works: no dmesg errs, X works
>
> 14) 5.12.0-rc3-pmac-00067-g4c0104a83fc (bad)
> -> fails: kernel panic
>
> The git bisect thinks this is the bad commit, but I'm not sure it means
> anything at all:
>
> -----
>
> 4c0104a83fc3990a76a01a2f4e504251fa9814c4 is the first bad commit
next prev parent reply other threads:[~2021-07-31 10:14 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-12 12:50 [PATCH v3 00/41] powerpc/32: Switch to interrupt entry/exit in C Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 01/41] powerpc/traps: Declare unrecoverable_exception() as __noreturn Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 02/41] powerpc/40x: Don't use SPRN_SPRG_SCRATCH0/1 in TLB miss handlers Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 03/41] powerpc/40x: Change CRITICAL_EXCEPTION_PROLOG macro to a gas macro Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 04/41] powerpc/40x: Save SRR0/SRR1 and r10/r11 earlier in critical exception Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 05/41] powerpc/40x: Reorder a few instructions in critical exception prolog Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 06/41] powerpc/40x: Prepare for enabling MMU " Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 07/41] powerpc/40x: Prepare normal exception handler for enabling MMU early Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 08/41] powerpc/32: Reconcile interrupts in C Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 09/41] powerpc/32: Entry cpu time accounting " Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 10/41] powerpc/32: Handle bookE debugging in C in exception entry Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 11/41] powerpc/32: Use fast instruction to set MSR RI in exception prolog on 8xx Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 12/41] powerpc/32: Remove ksp_limit Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 13/41] powerpc/32: Always enable data translation in exception prolog Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 14/41] powerpc/32: Tag DAR in EXCEPTION_PROLOG_2 for the 8xx Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 15/41] powerpc/32: Enable instruction translation at the same time as data translation Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 16/41] powerpc/32: Statically initialise first emergency context Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 17/41] powerpc/32: Add vmap_stack_overflow label inside the macro Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 18/41] powerpc/32: Use START_EXCEPTION() as much as possible Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 19/41] powerpc/32: Move exception prolog code into .text once MMU is back on Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 20/41] powerpc/32: Provide a name to exception prolog continuation in virtual mode Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 21/41] powerpc/32: Refactor booke critical registers saving Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 22/41] powerpc/32: Perform normal function call in exception entry Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 23/41] powerpc/32: Always save non volatile registers on " Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 24/41] powerpc/32: Replace ASM exception exit by C exception exit from ppc64 Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 25/41] powerpc/32: Don't save thread.regs on interrupt entry Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 26/41] powerpc/32: Set regs parameter in r3 in transfer_to_handler Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 27/41] powerpc/32: Call bad_page_fault() from do_page_fault() Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 28/41] powerpc/32: Save trap number on stack in exception prolog Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 29/41] powerpc/32: Add a prepare_transfer_to_handler macro for exception prologs Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 30/41] powerpc/32: Only restore non volatile registers when required Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 31/41] powerpc/32: Dismantle EXC_XFER_STD/LITE/TEMPLATE Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-07-31 10:12 ` Finn Thain [this message]
2021-07-31 10:12 ` Finn Thain
2021-07-31 15:39 ` Christophe Leroy
2021-07-31 15:39 ` Christophe Leroy
2021-08-01 1:21 ` Finn Thain
2021-08-01 1:21 ` Finn Thain
2021-08-01 6:57 ` Stan Johnson
2021-08-01 23:48 ` Finn Thain
2021-08-01 23:48 ` Finn Thain
2021-08-02 15:19 ` LEROY Christophe
2021-08-02 15:19 ` LEROY Christophe
2021-08-03 0:43 ` Finn Thain
2021-08-03 0:43 ` Finn Thain
[not found] ` <62d36dbb-4b39-f5bd-7962-4dcfbea729b3@linux-m68k.org>
[not found] ` <683c8156-97b0-5ba7-ce31-2e8613089836@yahoo.com>
2021-08-04 4:57 ` Finn Thain
2021-08-04 4:57 ` Finn Thain
2021-07-31 16:40 ` Christophe Leroy
2021-07-31 16:40 ` Christophe Leroy
2021-08-01 1:39 ` Finn Thain
2021-08-01 1:39 ` Finn Thain
2021-03-12 12:50 ` [PATCH v3 32/41] powerpc/32: Remove the xfer parameter in EXCEPTION() macro Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 33/41] powerpc/32: Refactor saving of volatile registers in exception prologs Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 34/41] powerpc/32: Save remaining registers in exception prolog Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 35/41] powerpc/32: Return directly from power_save_ppc32_restore() Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 36/41] powerpc/32: Only use prepare_transfer_to_handler function on book3s/32 and e500 Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 37/41] powerpc/32s: Move KUEP locking/unlocking in C Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-27 17:24 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 38/41] powerpc/64s: Make kuap_check_amr() and kuap_get_and_check_amr() generic Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 39/41] powerpc/32s: Create C version of kuap save/restore/check helpers Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 40/41] powerpc/8xx: " Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 41/41] powerpc/32: Manage KUAP in C Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy
2021-03-31 1:09 ` [PATCH v3 00/41] powerpc/32: Switch to interrupt entry/exit " Michael Ellerman
2021-03-31 1:09 ` Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=666e3ab4-372-27c2-4621-7cc3933756dd@linux-m68k.org \
--to=fthain@linux-m68k.org \
--cc=benh@kernel.crashing.org \
--cc=christophe.leroy@csgroup.eu \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=paulus@samba.org \
--cc=userm57@yahoo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.