From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 22/28] boot: rename BR2_TARGET_* to BR2_BOOT_*
Date: Tue, 5 Jul 2011 21:54:13 +0200 [thread overview]
Message-ID: <66caabc54512ea1f23a7361744fd5e9c74d8a192.1309895466.git.thomas.petazzoni@free-electrons.com> (raw)
In-Reply-To: <cover.1309895466.git.thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
boot/at91bootstrap/Config.in | 18 +++---
boot/at91bootstrap/at91bootstrap.mk | 8 +-
boot/at91dataflashboot/Config.in | 2 +-
boot/at91dataflashboot/at91dataflashboot.mk | 2 +-
boot/barebox/Config.in | 8 +-
boot/barebox/barebox.mk | 12 ++--
boot/grub/Config.in | 94 +++++++++++++-------------
boot/grub/grub.mk | 50 +++++++-------
boot/syslinux/Config.in | 10 ++--
boot/syslinux/syslinux.mk | 6 +-
boot/u-boot/Config.in | 70 ++++++++++----------
boot/u-boot/u-boot.mk | 34 +++++-----
12 files changed, 157 insertions(+), 157 deletions(-)
diff --git a/boot/at91bootstrap/Config.in b/boot/at91bootstrap/Config.in
index f022dd5..26af93a 100644
--- a/boot/at91bootstrap/Config.in
+++ b/boot/at91bootstrap/Config.in
@@ -1,4 +1,4 @@
-menuconfig BR2_TARGET_AT91BOOTSTRAP
+menuconfig BR2_BOOT_AT91BOOTSTRAP
depends on BR2_arm
bool "AT91 Bootstrap"
help
@@ -8,9 +8,9 @@ menuconfig BR2_TARGET_AT91BOOTSTRAP
- Peripheral drivers such as PIO, PMC or SDRAMC...
- Physical media algorithm such as DataFlash, NandFlash, NOR Flash...
-if BR2_TARGET_AT91BOOTSTRAP
+if BR2_BOOT_AT91BOOTSTRAP
-config BR2_TARGET_AT91BOOTSTRAP_BOARD
+config BR2_BOOT_AT91BOOTSTRAP_BOARD
string "Bootstrap board"
default ""
help
@@ -18,22 +18,22 @@ config BR2_TARGET_AT91BOOTSTRAP_BOARD
choice
prompt "Boot Memory"
- default BR2_TARGET_AT91BOOTSTRAP_DATAFLASH
+ default BR2_BOOT_AT91BOOTSTRAP_DATAFLASH
help
Select Chip for which AT91 bootstrap should be built
-config BR2_TARGET_AT91BOOTSTRAP_DATAFLASH
+config BR2_BOOT_AT91BOOTSTRAP_DATAFLASH
bool "Data Flash"
-config BR2_TARGET_AT91BOOTSTRAP_NANDFLASH
+config BR2_BOOT_AT91BOOTSTRAP_NANDFLASH
bool "NAND Flash"
endchoice
-config BR2_TARGET_AT91BOOTSTRAP_MEMORY
+config BR2_BOOT_AT91BOOTSTRAP_MEMORY
string
- default "dataflash" if BR2_TARGET_AT91BOOTSTRAP_DATAFLASH
- default "nandflash" if BR2_TARGET_AT91BOOTSTRAP_NANDFLASH
+ default "dataflash" if BR2_BOOT_AT91BOOTSTRAP_DATAFLASH
+ default "nandflash" if BR2_BOOT_AT91BOOTSTRAP_NANDFLASH
endif
diff --git a/boot/at91bootstrap/at91bootstrap.mk b/boot/at91bootstrap/at91bootstrap.mk
index 66fc961..46627de 100644
--- a/boot/at91bootstrap/at91bootstrap.mk
+++ b/boot/at91bootstrap/at91bootstrap.mk
@@ -7,8 +7,8 @@ AT91BOOTSTRAP_VERSION := 1.16
AT91BOOTSTRAP_SITE := http://www.atmel.com/dyn/resources/prod_documents/
AT91BOOTSTRAP_SOURCE := AT91Bootstrap$(AT91BOOTSTRAP_VERSION).zip
-AT91BOOTSTRAP_BOARD := $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_BOARD))
-AT91BOOTSTRAP_MEMORY := $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_MEMORY))
+AT91BOOTSTRAP_BOARD := $(call qstrip,$(BR2_BOOT_AT91BOOTSTRAP_BOARD))
+AT91BOOTSTRAP_MEMORY := $(call qstrip,$(BR2_BOOT_AT91BOOTSTRAP_MEMORY))
AT91BOOTSTRAP_MAKE_SUBDIR := board/$(AT91BOOTSTRAP_BOARD)/$(AT91BOOTSTRAP_MEMORY)
AT91BOOTSTRAP_BINARY := $(AT91BOOTSTRAP_MAKE_SUBDIR)/$(AT91BOOTSTRAP_MEMORY)_$(AT91BOOTSTRAP_BOARD).bin
@@ -36,13 +36,13 @@ $(eval $(call GENTARGETS,boot,at91bootstrap))
# Toplevel Makefile options
#
#############################################################
-ifeq ($(BR2_TARGET_AT91BOOTSTRAP),y)
+ifeq ($(BR2_BOOT_AT91BOOTSTRAP),y)
TARGETS+=at91bootstrap
# we NEED a board name unless we're at make source
ifeq ($(filter source,$(MAKECMDGOALS)),)
ifeq ($(AT91BOOTSTRAP_BOARD),)
-$(error No AT91Bootstrap board name set. Check your BR2_TARGET_AT91BOOTSTRAP_BOARD setting)
+$(error No AT91Bootstrap board name set. Check your BR2_BOOT_AT91BOOTSTRAP_BOARD setting)
endif
endif
diff --git a/boot/at91dataflashboot/Config.in b/boot/at91dataflashboot/Config.in
index 88cd058..3ac2928 100644
--- a/boot/at91dataflashboot/Config.in
+++ b/boot/at91dataflashboot/Config.in
@@ -1,3 +1,3 @@
-menuconfig BR2_TARGET_AT91DATAFLASHBOOT
+menuconfig BR2_BOOT_AT91DATAFLASHBOOT
depends on BR2_arm
bool "AT91 DataFlashBoot"
diff --git a/boot/at91dataflashboot/at91dataflashboot.mk b/boot/at91dataflashboot/at91dataflashboot.mk
index 652b861..fb698ce 100644
--- a/boot/at91dataflashboot/at91dataflashboot.mk
+++ b/boot/at91dataflashboot/at91dataflashboot.mk
@@ -26,6 +26,6 @@ $(eval $(call GENTARGETS,boot,at91dataflashboot))
# Toplevel Makefile options
#
#############################################################
-ifeq ($(BR2_TARGET_AT91DATAFLASHBOOT),y)
+ifeq ($(BR2_BOOT_AT91DATAFLASHBOOT),y)
TARGETS+=at91dataflashboot
endif
diff --git a/boot/barebox/Config.in b/boot/barebox/Config.in
index a821c45..7f377a4 100644
--- a/boot/barebox/Config.in
+++ b/boot/barebox/Config.in
@@ -1,18 +1,18 @@
-menuconfig BR2_TARGET_BAREBOX
+menuconfig BR2_BOOT_BAREBOX
bool "Barebox"
help
The Barebox bootloader, formerly known as U-Boot v2.
http://www.barebox.org
-if BR2_TARGET_BAREBOX
-config BR2_TARGET_BAREBOX_BOARD_DEFCONFIG
+if BR2_BOOT_BAREBOX
+config BR2_BOOT_BAREBOX_BOARD_DEFCONFIG
string "board defconfig"
help
Name of the board for which Barebox should be built, without
the _defconfig suffix.
-config BR2_TARGET_BAREBOX_BAREBOXENV
+config BR2_BOOT_BAREBOX_BAREBOXENV
bool "bareboxenv tool in target"
help
Install bareboxenv tool in target.
diff --git a/boot/barebox/barebox.mk b/boot/barebox/barebox.mk
index 65a4f66..b844d43 100644
--- a/boot/barebox/barebox.mk
+++ b/boot/barebox/barebox.mk
@@ -9,11 +9,11 @@ BAREBOX_SOURCE := barebox-$(BAREBOX_VERSION).tar.bz2
BAREBOX_SITE := http://www.barebox.org/download/
BAREBOX_INSTALL_IMAGES = YES
-ifneq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
+ifneq ($(BR2_BOOT_BAREBOX_BAREBOXENV),y)
BAREBOX_INSTALL_TARGET = NO
endif
-BAREBOX_BOARD_DEFCONFIG = $(call qstrip,$(BR2_TARGET_BAREBOX_BOARD_DEFCONFIG))
+BAREBOX_BOARD_DEFCONFIG = $(call qstrip,$(BR2_BOOT_BAREBOX_BOARD_DEFCONFIG))
ifeq ($(KERNEL_ARCH),i386)
BAREBOX_ARCH=x86
@@ -29,7 +29,7 @@ define BAREBOX_CONFIGURE_CMDS
$(MAKE) $(BAREBOX_MAKE_FLAGS) -C $(@D) $(BAREBOX_BOARD_DEFCONFIG)_defconfig
endef
-ifeq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
+ifeq ($(BR2_BOOT_BAREBOX_BAREBOXENV),y)
define BAREBOX_BUILD_BAREBOXENV_CMDS
$(TARGET_CC) $(TARGET_CFLAGS) $(TARGET_LDFLAGS) -o $(@D)/bareboxenv \
$(@D)/scripts/bareboxenv.c
@@ -45,7 +45,7 @@ define BAREBOX_INSTALL_IMAGES_CMDS
cp $(@D)/barebox.bin $(BINARIES_DIR)
endef
-ifeq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
+ifeq ($(BR2_BOOT_BAREBOX_BAREBOXENV),y)
define BAREBOX_INSTALL_TARGET_CMDS
cp $(@D)/bareboxenv $(TARGET_DIR)/usr/bin
endef
@@ -53,13 +53,13 @@ endif
$(eval $(call GENTARGETS,boot,barebox))
-ifeq ($(BR2_TARGET_BAREBOX),y)
+ifeq ($(BR2_BOOT_BAREBOX),y)
TARGETS+=barebox
# we NEED a board defconfig file unless we're at make source
ifeq ($(filter source,$(MAKECMDGOALS)),)
ifeq ($(BAREBOX_BOARD_DEFCONFIG),)
-$(error No Barebox defconfig file. Check your BR2_TARGET_BAREBOX_BOARD_DEFCONFIG setting)
+$(error No Barebox defconfig file. Check your BR2_BOOT_BAREBOX_BOARD_DEFCONFIG setting)
endif
endif
diff --git a/boot/grub/Config.in b/boot/grub/Config.in
index bc7a73e..462ef70 100644
--- a/boot/grub/Config.in
+++ b/boot/grub/Config.in
@@ -1,146 +1,146 @@
-config BR2_TARGET_GRUB
+config BR2_BOOT_GRUB
bool "grub"
depends on BR2_i386 || BR2_x86_64
help
The GRand Unified Bootloader for x86 systems.
-config BR2_TARGET_GRUB_SPLASH
+config BR2_BOOT_GRUB_SPLASH
bool "Splashimage support"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
Add support for splashimage.
A splashimage is a 14-color indexed .xpm picture which
is displayed as background for the grub menu.
-config BR2_TARGET_GRUB_DISKLESS
+config BR2_BOOT_GRUB_DISKLESS
bool "diskless support"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable diskless support
-config BR2_TARGET_GRUB_3c595
+config BR2_BOOT_GRUB_3c595
bool "3Com595 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable 3Com595 driver
-config BR2_TARGET_GRUB_3c90x
+config BR2_BOOT_GRUB_3c90x
bool "3Com90x driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable 3Com90x driver
-config BR2_TARGET_GRUB_davicom
+config BR2_BOOT_GRUB_davicom
bool "Davicom driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Davicom driver
-config BR2_TARGET_GRUB_e1000
+config BR2_BOOT_GRUB_e1000
bool "Etherexpress Pro/1000 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Etherexpress Pro/1000 driver
-config BR2_TARGET_GRUB_eepro100
+config BR2_BOOT_GRUB_eepro100
bool "Etherexpress Pro/100 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Etherexpress Pro/100 driver
-config BR2_TARGET_GRUB_epic100
+config BR2_BOOT_GRUB_epic100
bool "SMC 83c170 EPIC/100 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable SMC 83c170 EPIC/100 driver
-config BR2_TARGET_GRUB_forcedeth
+config BR2_BOOT_GRUB_forcedeth
bool "Nvidia Geforce driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Nvidia Geforce driver
-config BR2_TARGET_GRUB_natsemi
+config BR2_BOOT_GRUB_natsemi
bool "NatSemi DP8381x driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable NatSemi DP8381x driver
-config BR2_TARGET_GRUB_ns83820
+config BR2_BOOT_GRUB_ns83820
bool "NS83820 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable NS83820 driver
-config BR2_TARGET_GRUB_ns8390
+config BR2_BOOT_GRUB_ns8390
bool "NE2000 PCI driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable NE2000 PCI driver
-config BR2_TARGET_GRUB_pcnet32
+config BR2_BOOT_GRUB_pcnet32
bool "AMD Lance/PCI PCNet/32 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable AMD Lance/PCI PCNet/32 driver
-config BR2_TARGET_GRUB_pnic
+config BR2_BOOT_GRUB_pnic
bool "Bochs Pseudo Nic driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Bochs Pseudo Nic driver
-config BR2_TARGET_GRUB_rtl8139
+config BR2_BOOT_GRUB_rtl8139
bool "Realtek 8139 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Realtek 8139 driver
-config BR2_TARGET_GRUB_r8169
+config BR2_BOOT_GRUB_r8169
bool "Realtek 8169 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Realtek 8169 driver
-config BR2_TARGET_GRUB_sis900
+config BR2_BOOT_GRUB_sis900
bool "SIS 900 and SIS 7016 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable SIS 900 and SIS 7016 driver
-config BR2_TARGET_GRUB_tg3
+config BR2_BOOT_GRUB_tg3
bool "Broadcom Tigon3 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Broadcom Tigon3 driver
-config BR2_TARGET_GRUB_tulip
+config BR2_BOOT_GRUB_tulip
bool "Tulip driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Tulip driver
-config BR2_TARGET_GRUB_tlan
+config BR2_BOOT_GRUB_tlan
bool "TI ThunderLAN driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable TI ThunderLAN driver
-config BR2_TARGET_GRUB_undi
+config BR2_BOOT_GRUB_undi
bool "PXE UNDI driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable PXE UNDI driver
-config BR2_TARGET_GRUB_via_rhine
+config BR2_BOOT_GRUB_via_rhine
bool "Rhine-I/II driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Rhine-I/II driver
-config BR2_TARGET_GRUB_w89c840
+config BR2_BOOT_GRUB_w89c840
bool "Winbond W89c840 driver"
- depends on BR2_TARGET_GRUB
+ depends on BR2_BOOT_GRUB
help
enable Winbond W89c840 driver
diff --git a/boot/grub/grub.mk b/boot/grub/grub.mk
index 4938416..93238cb 100644
--- a/boot/grub/grub.mk
+++ b/boot/grub/grub.mk
@@ -14,29 +14,29 @@ ifeq ($(BR2_LARGEFILE),)
GRUB_CFLAGS+=-U_FILE_OFFSET_BITS
endif
-GRUB_CONFIG-$(BR2_TARGET_GRUB_SPLASH) += --enable-graphics
-GRUB_CONFIG-$(BR2_TARGET_GRUB_DISKLESS) += --enable-diskless
-GRUB_CONFIG-$(BR2_TARGET_GRUB_3c595) += --enable-3c595
-GRUB_CONFIG-$(BR2_TARGET_GRUB_3c90x) += --enable-3c90x
-GRUB_CONFIG-$(BR2_TARGET_GRUB_davicom) += --enable-davicom
-GRUB_CONFIG-$(BR2_TARGET_GRUB_e1000) += --enable-e1000
-GRUB_CONFIG-$(BR2_TARGET_GRUB_eepro100) += --enable-eepro100
-GRUB_CONFIG-$(BR2_TARGET_GRUB_epic100) += --enable-epic100
-GRUB_CONFIG-$(BR2_TARGET_GRUB_forcedeth) += --enable-forcedeth
-GRUB_CONFIG-$(BR2_TARGET_GRUB_natsemi) += --enable-natsemi
-GRUB_CONFIG-$(BR2_TARGET_GRUB_ns83820) += --enable-ns83820
-GRUB_CONFIG-$(BR2_TARGET_GRUB_ns8390) += --enable-ns8390
-GRUB_CONFIG-$(BR2_TARGET_GRUB_pcnet32) += --enable-pcnet32
-GRUB_CONFIG-$(BR2_TARGET_GRUB_pnic) += --enable-pnic
-GRUB_CONFIG-$(BR2_TARGET_GRUB_rtl8139) += --enable-rtl8139
-GRUB_CONFIG-$(BR2_TARGET_GRUB_r8169) += --enable-r8169
-GRUB_CONFIG-$(BR2_TARGET_GRUB_sis900) += --enable-sis900
-GRUB_CONFIG-$(BR2_TARGET_GRUB_tg3) += --enable-tg3
-GRUB_CONFIG-$(BR2_TARGET_GRUB_tulip) += --enable-tulip
-GRUB_CONFIG-$(BR2_TARGET_GRUB_tlan) += --enable-tlan
-GRUB_CONFIG-$(BR2_TARGET_GRUB_undi) += --enable-undi
-GRUB_CONFIG-$(BR2_TARGET_GRUB_via_rhine) += --enable-via-rhine
-GRUB_CONFIG-$(BR2_TARGET_GRUB_w89c840) += --enable-w89c840
+GRUB_CONFIG-$(BR2_BOOT_GRUB_SPLASH) += --enable-graphics
+GRUB_CONFIG-$(BR2_BOOT_GRUB_DISKLESS) += --enable-diskless
+GRUB_CONFIG-$(BR2_BOOT_GRUB_3c595) += --enable-3c595
+GRUB_CONFIG-$(BR2_BOOT_GRUB_3c90x) += --enable-3c90x
+GRUB_CONFIG-$(BR2_BOOT_GRUB_davicom) += --enable-davicom
+GRUB_CONFIG-$(BR2_BOOT_GRUB_e1000) += --enable-e1000
+GRUB_CONFIG-$(BR2_BOOT_GRUB_eepro100) += --enable-eepro100
+GRUB_CONFIG-$(BR2_BOOT_GRUB_epic100) += --enable-epic100
+GRUB_CONFIG-$(BR2_BOOT_GRUB_forcedeth) += --enable-forcedeth
+GRUB_CONFIG-$(BR2_BOOT_GRUB_natsemi) += --enable-natsemi
+GRUB_CONFIG-$(BR2_BOOT_GRUB_ns83820) += --enable-ns83820
+GRUB_CONFIG-$(BR2_BOOT_GRUB_ns8390) += --enable-ns8390
+GRUB_CONFIG-$(BR2_BOOT_GRUB_pcnet32) += --enable-pcnet32
+GRUB_CONFIG-$(BR2_BOOT_GRUB_pnic) += --enable-pnic
+GRUB_CONFIG-$(BR2_BOOT_GRUB_rtl8139) += --enable-rtl8139
+GRUB_CONFIG-$(BR2_BOOT_GRUB_r8169) += --enable-r8169
+GRUB_CONFIG-$(BR2_BOOT_GRUB_sis900) += --enable-sis900
+GRUB_CONFIG-$(BR2_BOOT_GRUB_tg3) += --enable-tg3
+GRUB_CONFIG-$(BR2_BOOT_GRUB_tulip) += --enable-tulip
+GRUB_CONFIG-$(BR2_BOOT_GRUB_tlan) += --enable-tlan
+GRUB_CONFIG-$(BR2_BOOT_GRUB_undi) += --enable-undi
+GRUB_CONFIG-$(BR2_BOOT_GRUB_via_rhine) += --enable-via-rhine
+GRUB_CONFIG-$(BR2_BOOT_GRUB_w89c840) += --enable-w89c840
define GRUB_DEBIAN_PATCHES
# Apply the patches from the Debian patch
@@ -58,7 +58,7 @@ define GRUB_INSTALL_STAGING_CMDS
install -m 0755 -D $(@D)/grub/grub $(STAGING_DIR)/sbin/grub
endef
-ifeq ($(BR2_TARGET_GRUB_SPLASH),y)
+ifeq ($(BR2_BOOT_GRUB_SPLASH),y)
define GRUB_INSTALL_SPLASH
cp boot/grub/splash.xpm.gz $(TARGET_DIR)/boot/grub/
endef
@@ -89,6 +89,6 @@ $(eval $(call AUTOTARGETS,boot,grub))
# Toplevel Makefile options
#
#############################################################
-ifeq ($(BR2_TARGET_GRUB),y)
+ifeq ($(BR2_BOOT_GRUB),y)
TARGETS+=grub
endif
diff --git a/boot/syslinux/Config.in b/boot/syslinux/Config.in
index 60f3b8f..eaa3d70 100644
--- a/boot/syslinux/Config.in
+++ b/boot/syslinux/Config.in
@@ -1,16 +1,16 @@
-config BR2_TARGET_SYSLINUX
+config BR2_BOOT_SYSLINUX
bool "syslinux"
depends on BR2_i386 || BR2_x86_64
help
The syslinux bootloader for x86 systems.
This includes: syslinux, pxelinux, extlinux.
-config BR2_TARGET_SYSLINUX_ISOLINUX
+config BR2_BOOT_SYSLINUX_ISOLINUX
bool "Install isolinux"
- depends on BR2_TARGET_SYSLINUX
+ depends on BR2_BOOT_SYSLINUX
default y
-config BR2_TARGET_SYSLINUX_PXELINUX
+config BR2_BOOT_SYSLINUX_PXELINUX
bool "Install pxelinux"
- depends on BR2_TARGET_SYSLINUX
+ depends on BR2_BOOT_SYSLINUX
default y
diff --git a/boot/syslinux/syslinux.mk b/boot/syslinux/syslinux.mk
index d1b2907..1f50ed5 100644
--- a/boot/syslinux/syslinux.mk
+++ b/boot/syslinux/syslinux.mk
@@ -17,8 +17,8 @@ define SYSLINUX_BUILD_CMDS
$(TARGET_MAKE_ENV) $(MAKE) CC="$(HOSTCC)" AR="$(HOSTAR)" -C $(@D)
endef
-SYSLINUX_IMAGES-$(BR2_TARGET_SYSLINUX_ISOLINUX) += isolinux.bin
-SYSLINUX_IMAGES-$(BR2_TARGET_SYSLINUX_PXELINUX) += pxelinux.bin
+SYSLINUX_IMAGES-$(BR2_BOOT_SYSLINUX_ISOLINUX) += isolinux.bin
+SYSLINUX_IMAGES-$(BR2_BOOT_SYSLINUX_PXELINUX) += pxelinux.bin
define SYSLINUX_INSTALL_IMAGES_CMDS
for i in $(SYSLINUX_IMAGES-y); do \
@@ -33,6 +33,6 @@ $(eval $(call GENTARGETS,boot,syslinux))
# Toplevel Makefile options
#
#############################################################
-ifeq ($(BR2_TARGET_SYSLINUX),y)
+ifeq ($(BR2_BOOT_SYSLINUX),y)
TARGETS+=syslinux
endif
diff --git a/boot/u-boot/Config.in b/boot/u-boot/Config.in
index aada346..d9a6385 100644
--- a/boot/u-boot/Config.in
+++ b/boot/u-boot/Config.in
@@ -1,10 +1,10 @@
-menuconfig BR2_TARGET_UBOOT
+menuconfig BR2_BOOT_UBOOT
bool "U-Boot"
help
Build "Das U-Boot" Boot Monitor
-if BR2_TARGET_UBOOT
-config BR2_TARGET_UBOOT_BOARDNAME
+if BR2_BOOT_UBOOT
+config BR2_BOOT_UBOOT_BOARDNAME
string "U-Boot board name"
help
One of U-Boot supported boards to be built.
@@ -12,47 +12,47 @@ config BR2_TARGET_UBOOT_BOARDNAME
choice
prompt "U-Boot Version"
- default BR2_TARGET_UBOOT_2011_03
+ default BR2_BOOT_UBOOT_2011_03
help
Select the specific U-Boot version you want to use
-config BR2_TARGET_UBOOT_2011_03
+config BR2_BOOT_UBOOT_2011_03
bool "2011.03"
-config BR2_TARGET_UBOOT_2010_12
+config BR2_BOOT_UBOOT_2010_12
bool "2010.12"
-config BR2_TARGET_UBOOT_2010_09
+config BR2_BOOT_UBOOT_2010_09
bool "2010.09"
-config BR2_TARGET_UBOOT_2010_06
+config BR2_BOOT_UBOOT_2010_06
bool "2010.06"
-config BR2_TARGET_UBOOT_2010_03
+config BR2_BOOT_UBOOT_2010_03
bool "2010.03"
-config BR2_TARGET_UBOOT_CUSTOM_TARBALL
+config BR2_BOOT_UBOOT_CUSTOM_TARBALL
bool "Custom tarball"
endchoice
-if BR2_TARGET_UBOOT_CUSTOM_TARBALL
+if BR2_BOOT_UBOOT_CUSTOM_TARBALL
-config BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION
+config BR2_BOOT_UBOOT_CUSTOM_TARBALL_LOCATION
string "URL of custom U-Boot tarball"
endif
-config BR2_TARGET_UBOOT_VERSION
+config BR2_BOOT_UBOOT_VERSION
string
- default "2011.03" if BR2_TARGET_UBOOT_2011_03
- default "2010.12" if BR2_TARGET_UBOOT_2010_12
- default "2010.09" if BR2_TARGET_UBOOT_2010_09
- default "2010.06" if BR2_TARGET_UBOOT_2010_06
- default "2010.03" if BR2_TARGET_UBOOT_2010_03
- default "custom" if BR2_TARGET_UBOOT_CUSTOM_TARBALL
-
-config BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR
+ default "2011.03" if BR2_BOOT_UBOOT_2011_03
+ default "2010.12" if BR2_BOOT_UBOOT_2010_12
+ default "2010.09" if BR2_BOOT_UBOOT_2010_09
+ default "2010.06" if BR2_BOOT_UBOOT_2010_06
+ default "2010.03" if BR2_BOOT_UBOOT_2010_03
+ default "custom" if BR2_BOOT_UBOOT_CUSTOM_TARBALL
+
+config BR2_BOOT_UBOOT_CUSTOM_PATCH_DIR
string "custom patch dir"
help
If your board requires custom patches, add the path to the
@@ -64,68 +64,68 @@ config BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR
choice
prompt "U-Boot binary format"
-config BR2_TARGET_UBOOT_FORMAT_BIN
+config BR2_BOOT_UBOOT_FORMAT_BIN
bool "u-boot.bin"
-config BR2_TARGET_UBOOT_FORMAT_KWB
+config BR2_BOOT_UBOOT_FORMAT_KWB
depends on BR2_arm
bool "u-boot.kwb (Marvell)"
-config BR2_TARGET_UBOOT_FORMAT_LDR
+config BR2_BOOT_UBOOT_FORMAT_LDR
depends on BR2_bfin
bool "u-boot.ldr"
endchoice
-config BR2_TARGET_UBOOT_TOOL_ENV
+config BR2_BOOT_UBOOT_TOOL_ENV
bool "fw_printenv tool in target"
help
Install fw_printenv / fw_setenv tools in target.
-menuconfig BR2_TARGET_UBOOT_NETWORK
+menuconfig BR2_BOOT_UBOOT_NETWORK
bool "Network Settings"
default y
help
Network settings for U-boot
-if BR2_TARGET_UBOOT_NETWORK
+if BR2_BOOT_UBOOT_NETWORK
-config BR2_TARGET_UBOOT_SERVERIP
+config BR2_BOOT_UBOOT_SERVERIP
string "server ip"
default "10.175.196.221"
help
TFTP server ip address
-config BR2_TARGET_UBOOT_IPADDR
+config BR2_BOOT_UBOOT_IPADDR
string "ip address"
default "10.175.196.18"
help
Target ip address
-config BR2_TARGET_UBOOT_GATEWAY
+config BR2_BOOT_UBOOT_GATEWAY
string "gateway ip"
default "10.175.196.1"
help
Gateway ip address
-config BR2_TARGET_UBOOT_NETMASK
+config BR2_BOOT_UBOOT_NETMASK
string "netmask"
default "255.255.255.0"
help
Network Mask
-config BR2_TARGET_UBOOT_ETHADDR
+config BR2_BOOT_UBOOT_ETHADDR
string "ethernet address"
default "04:25:fe:ed:00:18"
help
Target MAC address for the ethernet interface.
This should be changed for production units
-config BR2_TARGET_UBOOT_ETH1ADDR
+config BR2_BOOT_UBOOT_ETH1ADDR
string "ethernet 2 address"
help
Target MAC address for the second ethernet interface.
-endif # BR2_TARGET_UBOOT_NETWORK
+endif # BR2_BOOT_UBOOT_NETWORK
-endif # BR2_TARGET_UBOOT
+endif # BR2_BOOT_UBOOT
diff --git a/boot/u-boot/u-boot.mk b/boot/u-boot/u-boot.mk
index 215b1c7..ecbf675 100644
--- a/boot/u-boot/u-boot.mk
+++ b/boot/u-boot/u-boot.mk
@@ -3,14 +3,14 @@
# U-Boot
#
#############################################################
-U_BOOT_VERSION = $(call qstrip,$(BR2_TARGET_UBOOT_VERSION))
-U_BOOT_BOARD_NAME = $(call qstrip,$(BR2_TARGET_UBOOT_BOARDNAME))
+U_BOOT_VERSION = $(call qstrip,$(BR2_BOOT_UBOOT_VERSION))
+U_BOOT_BOARD_NAME = $(call qstrip,$(BR2_BOOT_UBOOT_BOARDNAME))
U_BOOT_INSTALL_IMAGES = YES
ifeq ($(U_BOOT_VERSION),custom)
# Handle custom U-Boot tarballs as specified by the configuration
-U_BOOT_TARBALL = $(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION))
+U_BOOT_TARBALL = $(call qstrip,$(BR2_BOOT_UBOOT_CUSTOM_TARBALL_LOCATION))
U_BOOT_SITE = $(dir $(U_BOOT_TARBALL))
U_BOOT_SOURCE = $(notdir $(U_BOOT_TARBALL))
else
@@ -19,10 +19,10 @@ U_BOOT_SITE = ftp://ftp.denx.de/pub/u-boot
U_BOOT_SOURCE = u-boot-$(U_BOOT_VERSION).tar.bz2
endif
-ifeq ($(BR2_TARGET_UBOOT_FORMAT_KWB),y)
+ifeq ($(BR2_BOOT_UBOOT_FORMAT_KWB),y)
U_BOOT_BIN = u-boot.kwb
U_BOOT_MAKE_TARGET = $(U_BOOT_BIN)
-else ifeq ($(BR2_TARGET_UBOOT_FORMAT_LDR),y)
+else ifeq ($(BR2_BOOT_UBOOT_FORMAT_LDR),y)
U_BOOT_BIN = u-boot.ldr
else
U_BOOT_BIN = u-boot.bin
@@ -52,9 +52,9 @@ $(if $(call qstrip,$(2)),
@echo '#define $(strip $(1)) $(call qstrip,$(2))' >> $(@D)/include/config.h)
endef
-ifneq ($(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR)),)
+ifneq ($(call qstrip,$(BR2_BOOT_UBOOT_CUSTOM_PATCH_DIR)),)
define U_BOOT_APPLY_CUSTOM_PATCHES
- toolchain/patch-kernel.sh $(@D) $(BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR) \
+ toolchain/patch-kernel.sh $(@D) $(BR2_BOOT_UBOOT_CUSTOM_PATCH_DIR) \
u-boot-$(U_BOOT_VERSION)-\*.patch
endef
@@ -71,16 +71,16 @@ define U_BOOT_CONFIGURE_CMDS
@echo "#define __BR2_ADDED_CONFIG_H" >> $(@D)/include/config.h
$(call insert_define,DATE,$(DATE))
$(call insert_define,CONFIG_LOAD_SCRIPTS,1)
- $(call insert_define,CONFIG_IPADDR,$(BR2_TARGET_UBOOT_IPADDR))
- $(call insert_define,CONFIG_GATEWAYIP,$(BR2_TARGET_UBOOT_GATEWAY))
- $(call insert_define,CONFIG_NETMASK,$(BR2_TARGET_UBOOT_NETMASK))
- $(call insert_define,CONFIG_SERVERIP,$(BR2_TARGET_UBOOT_SERVERIP))
- $(call insert_define,CONFIG_ETHADDR,$(BR2_TARGET_UBOOT_ETHADDR))
- $(call insert_define,CONFIG_ETH1ADDR,$(BR2_TARGET_UBOOT_ETH1ADDR))
+ $(call insert_define,CONFIG_IPADDR,$(BR2_BOOT_UBOOT_IPADDR))
+ $(call insert_define,CONFIG_GATEWAYIP,$(BR2_BOOT_UBOOT_GATEWAY))
+ $(call insert_define,CONFIG_NETMASK,$(BR2_BOOT_UBOOT_NETMASK))
+ $(call insert_define,CONFIG_SERVERIP,$(BR2_BOOT_UBOOT_SERVERIP))
+ $(call insert_define,CONFIG_ETHADDR,$(BR2_BOOT_UBOOT_ETHADDR))
+ $(call insert_define,CONFIG_ETH1ADDR,$(BR2_BOOT_UBOOT_ETH1ADDR))
@echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(@D)/include/config.h
endef
-ifeq ($(BR2_TARGET_UBOOT_TOOL_ENV),y)
+ifeq ($(BR2_BOOT_UBOOT_TOOL_ENV),y)
define U_BOOT_BUILD_TARGET_ENV_UTILS
$(TARGET_CONFIGURE_OPTS) $(MAKE) HOSTCC="$(TARGET_CC)" -C $(@D) env
endef
@@ -97,7 +97,7 @@ define U_BOOT_INSTALL_IMAGES_CMDS
cp -dpf $(@D)/$(U_BOOT_BIN) $(BINARIES_DIR)/
endef
-ifeq ($(BR2_TARGET_UBOOT_TOOL_ENV),y)
+ifeq ($(BR2_BOOT_UBOOT_TOOL_ENV),y)
define U_BOOT_INSTALL_TARGET_ENV_UTILS
$(INSTALL) -m 0755 -D $(@D)/tools/env/fw_printenv \
$(TARGET_DIR)/usr/sbin/fw_printenv
@@ -116,13 +116,13 @@ $(eval $(call GENTARGETS,boot,u-boot))
# Toplevel Makefile options
#
#############################################################
-ifeq ($(BR2_TARGET_UBOOT),y)
+ifeq ($(BR2_BOOT_UBOOT),y)
TARGETS+=u-boot
# we NEED a board name unless we're at make source
ifeq ($(filter source,$(MAKECMDGOALS)),)
ifeq ($(U_BOOT_BOARD_NAME),)
-$(error NO U-Boot board name set. Check your BR2_TARGET_UBOOT_BOARDNAME setting)
+$(error NO U-Boot board name set. Check your BR2_BOOT_UBOOT_BOARDNAME setting)
endif
endif
--
1.7.4.1
next prev parent reply other threads:[~2011-07-05 19:54 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-05 19:53 [Buildroot] [pull request v3] Pull request for branch for-2011.08/bootloaders Thomas Petazzoni
2011-07-05 19:53 ` [Buildroot] [PATCH 01/28] Makefile.package.in: Makes it possible to override the default extract commands Thomas Petazzoni
2011-07-07 21:00 ` Peter Korsgaard
2011-07-05 19:53 ` [Buildroot] [PATCH 02/28] Fix quoting in default extract command Thomas Petazzoni
2011-07-07 21:05 ` Peter Korsgaard
2011-07-05 19:53 ` [Buildroot] [PATCH 03/28] linux: make it possible to install the kernel in /boot Thomas Petazzoni
2011-07-07 19:08 ` Sven Neumann
2011-07-07 21:17 ` Peter Korsgaard
2011-07-05 19:53 ` [Buildroot] [PATCH 04/28] linux: use the defconfig mechanism after tuning the config Thomas Petazzoni
2011-07-07 21:46 ` Peter Korsgaard
2011-07-08 17:08 ` Thomas Petazzoni
2011-07-08 18:11 ` Peter Korsgaard
2011-07-05 19:53 ` [Buildroot] [PATCH 05/28] package: add infrastructure to install things in images/ Thomas Petazzoni
2011-07-07 21:47 ` Peter Korsgaard
2011-07-05 19:53 ` [Buildroot] [PATCH 06/28] package: fix patching procedure for host packages Thomas Petazzoni
2011-07-07 21:50 ` Peter Korsgaard
2011-07-07 21:55 ` Yann E. MORIN
2011-07-07 21:59 ` Peter Korsgaard
2011-07-05 19:53 ` [Buildroot] [PATCH 07/28] barebox: re-indent variable definitions Thomas Petazzoni
2011-07-10 8:57 ` Peter Korsgaard
2011-07-10 10:25 ` Thomas Petazzoni
2011-07-10 12:00 ` Peter Korsgaard
2011-07-05 19:53 ` [Buildroot] [PATCH 08/28] barebox: convert to GENTARGETS Thomas Petazzoni
2011-07-10 13:03 ` Peter Korsgaard
2011-07-05 19:54 ` [Buildroot] [PATCH 09/28] at91bootstrap: indent properly variable definitions Thomas Petazzoni
2011-07-05 19:54 ` [Buildroot] [PATCH 10/28] at91bootstrap: convert to GENTARGETS Thomas Petazzoni
2011-07-10 13:10 ` Peter Korsgaard
2011-07-05 19:54 ` [Buildroot] [PATCH 11/28] at91dataflashboot: indent properly variable definitions Thomas Petazzoni
2011-07-05 19:54 ` [Buildroot] [PATCH 12/28] at91dataflashboot: convert to GENTARGETS Thomas Petazzoni
2011-07-10 13:16 ` Peter Korsgaard
2011-07-05 19:54 ` [Buildroot] [PATCH 13/28] syslinux: " Thomas Petazzoni
2011-07-10 13:27 ` Peter Korsgaard
2011-07-05 19:54 ` [Buildroot] [PATCH 14/28] grub: convert to AUTOTARGETS Thomas Petazzoni
2011-07-10 13:30 ` Peter Korsgaard
2011-08-20 9:22 ` Darius Augulis
2011-08-26 12:02 ` Peter Korsgaard
2011-08-29 17:22 ` Darius Augulis
2011-07-05 19:54 ` [Buildroot] [PATCH 15/28] grub2: remove package Thomas Petazzoni
2011-07-10 13:31 ` Peter Korsgaard
2011-07-05 19:54 ` [Buildroot] [PATCH 16/28] u-boot: convert to GENTARGETS Thomas Petazzoni
2011-07-10 20:07 ` Peter Korsgaard
2011-07-05 19:54 ` [Buildroot] [PATCH 17/28] uboot-mkimage: new package Thomas Petazzoni
2011-07-10 20:10 ` Peter Korsgaard
2011-07-05 19:54 ` [Buildroot] [PATCH 18/28] linux: rename LINUX26 to LINUX Thomas Petazzoni
2011-07-05 19:54 ` [Buildroot] [PATCH 19/28] linux: indent and align some definitions Thomas Petazzoni
2011-07-05 19:54 ` [Buildroot] [PATCH 20/28] package: add support for post-download hooks Thomas Petazzoni
2011-07-10 20:25 ` Peter Korsgaard
2011-07-05 19:54 ` [Buildroot] [PATCH 21/28] linux: convert to the GENTARGETS infrastructure Thomas Petazzoni
2011-07-05 19:54 ` Thomas Petazzoni [this message]
2011-07-10 20:27 ` [Buildroot] [PATCH 22/28] boot: rename BR2_TARGET_* to BR2_BOOT_* Peter Korsgaard
2011-07-10 21:27 ` Thomas Petazzoni
2011-07-05 19:54 ` [Buildroot] [PATCH 23/28] u-boot: rename options BR2_BOOT_UBOOT* to BR2_BOOT_U_BOOT* Thomas Petazzoni
2011-07-05 19:54 ` [Buildroot] [PATCH 24/28] Improve TARGETS handling for bootloaders and kernel Thomas Petazzoni
2011-07-05 19:54 ` [Buildroot] [PATCH 25/28] linux: allow specification of a custom Git repository as a source Thomas Petazzoni
2011-07-05 19:54 ` [Buildroot] [PATCH 26/28] u-boot: allow specification of custom Git repo as source Thomas Petazzoni
2011-07-05 19:54 ` [Buildroot] [PATCH 27/28] Add x-loader bootloader Thomas Petazzoni
2011-07-05 19:54 ` [Buildroot] [PATCH 28/28] barebox: bump version Thomas Petazzoni
2011-07-07 10:25 ` [Buildroot] [pull request v3] Pull request for branch for-2011.08/bootloaders Luca Ceresoli
-- strict thread matches above, loose matches on Subject: below --
2011-07-04 21:33 [Buildroot] [pull request v2] " Thomas Petazzoni
2011-07-04 21:33 ` [Buildroot] [PATCH 22/28] boot: rename BR2_TARGET_* to BR2_BOOT_* Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=66caabc54512ea1f23a7361744fd5e9c74d8a192.1309895466.git.thomas.petazzoni@free-electrons.com \
--to=thomas.petazzoni@free-electrons.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.