* [U-Boot] [PATCH] sunxi: Add defconfig for Allwinner A23 EVB
@ 2017-02-16 10:46 Florent Jacquet
2017-02-16 18:32 ` Maxime Ripard
0 siblings, 1 reply; 9+ messages in thread
From: Florent Jacquet @ 2017-02-16 10:46 UTC (permalink / raw)
To: u-boot
This enables the support for the Allwinner A23 Evaluation Board (EVB),
that already had a device tree (from Linux) but no defconfig.
This board has an AXP223 PMIC, some NAND, Audio out and in plugs, an
accelerometer and light sensor, as well as a USB HSIC hub and a USB
OTG mini-USB connector. It also has a Wifi/BT chip.
Access to the other buses (LCD, MIPI DSI, LVDS, etc) can be done
through dedicated pin headers.
Signed-off-by: Florent Jacquet <florent.jacquet@free-electrons.com>
Cc: Jagan Teki <jagan@openedev.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
---
configs/sun8i_a23_evb_defconfig | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
create mode 100644 configs/sun8i_a23_evb_defconfig
diff --git a/configs/sun8i_a23_evb_defconfig b/configs/sun8i_a23_evb_defconfig
new file mode 100644
index 0000000..296df00
--- /dev/null
+++ b/configs/sun8i_a23_evb_defconfig
@@ -0,0 +1,19 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_A23=y
+CONFIG_DRAM_CLK=552
+CONFIG_DRAM_ZQ=63351
+CONFIG_USB0_VBUS_PIN="axp_drivebus"
+CONFIG_USB0_VBUS_DET="axp_vbus_detect"
+CONFIG_USB1_VBUS_PIN="PH7"
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-evb"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_USB_EHCI_HCD=y
--
2.7.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH] sunxi: Add defconfig for Allwinner A23 EVB
2017-02-16 10:46 [U-Boot] [PATCH] sunxi: Add defconfig for Allwinner A23 EVB Florent Jacquet
@ 2017-02-16 18:32 ` Maxime Ripard
2017-03-06 12:19 ` Florent Jacquet
0 siblings, 1 reply; 9+ messages in thread
From: Maxime Ripard @ 2017-02-16 18:32 UTC (permalink / raw)
To: u-boot
On Thu, Feb 16, 2017 at 11:46:42AM +0100, Florent Jacquet wrote:
> This enables the support for the Allwinner A23 Evaluation Board (EVB),
> that already had a device tree (from Linux) but no defconfig.
>
> This board has an AXP223 PMIC, some NAND, Audio out and in plugs, an
> accelerometer and light sensor, as well as a USB HSIC hub and a USB
> OTG mini-USB connector. It also has a Wifi/BT chip.
>
> Access to the other buses (LCD, MIPI DSI, LVDS, etc) can be done
> through dedicated pin headers.
>
> Signed-off-by: Florent Jacquet <florent.jacquet@free-electrons.com>
> Cc: Jagan Teki <jagan@openedev.com>
> Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170216/a2a7ef38/attachment.sig>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH] sunxi: Add defconfig for Allwinner A23 EVB
2017-02-16 18:32 ` Maxime Ripard
@ 2017-03-06 12:19 ` Florent Jacquet
2017-03-13 8:42 ` Florent Jacquet
0 siblings, 1 reply; 9+ messages in thread
From: Florent Jacquet @ 2017-03-06 12:19 UTC (permalink / raw)
To: u-boot
On 16/02/2017 19:32, Maxime Ripard wrote:
> On Thu, Feb 16, 2017 at 11:46:42AM +0100, Florent Jacquet wrote:
>> This enables the support for the Allwinner A23 Evaluation Board (EVB),
>> that already had a device tree (from Linux) but no defconfig.
>>
>> This board has an AXP223 PMIC, some NAND, Audio out and in plugs, an
>> accelerometer and light sensor, as well as a USB HSIC hub and a USB
>> OTG mini-USB connector. It also has a Wifi/BT chip.
>>
>> Access to the other buses (LCD, MIPI DSI, LVDS, etc) can be done
>> through dedicated pin headers.
>>
>> Signed-off-by: Florent Jacquet <florent.jacquet@free-electrons.com>
>> Cc: Jagan Teki <jagan@openedev.com>
>> Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
>
> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
>
> Thanks!
> Maxime
>
Hello,
Any updates on this patch?
Thanks
Florent
--
Florent Jacquet, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH] sunxi: Add defconfig for Allwinner A23 EVB
2017-03-06 12:19 ` Florent Jacquet
@ 2017-03-13 8:42 ` Florent Jacquet
2017-03-20 7:19 ` Florent Jacquet
0 siblings, 1 reply; 9+ messages in thread
From: Florent Jacquet @ 2017-03-13 8:42 UTC (permalink / raw)
To: u-boot
On 06/03/2017 13:19, Florent Jacquet wrote:
> On 16/02/2017 19:32, Maxime Ripard wrote:
>> On Thu, Feb 16, 2017 at 11:46:42AM +0100, Florent Jacquet wrote:
>>> This enables the support for the Allwinner A23 Evaluation Board (EVB),
>>> that already had a device tree (from Linux) but no defconfig.
>>>
>>> This board has an AXP223 PMIC, some NAND, Audio out and in plugs, an
>>> accelerometer and light sensor, as well as a USB HSIC hub and a USB
>>> OTG mini-USB connector. It also has a Wifi/BT chip.
>>>
>>> Access to the other buses (LCD, MIPI DSI, LVDS, etc) can be done
>>> through dedicated pin headers.
>>>
>>> Signed-off-by: Florent Jacquet <florent.jacquet@free-electrons.com>
>>> Cc: Jagan Teki <jagan@openedev.com>
>>> Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
>>
>> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
>>
>> Thanks!
>> Maxime
>>
>
> Hello,
>
> Any updates on this patch?
>
> Thanks
> Florent
>
Hello,
Has somebody any news concerning this patch?
Thanks
Florent
--
Florent Jacquet, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH] sunxi: Add defconfig for Allwinner A23 EVB
2017-03-13 8:42 ` Florent Jacquet
@ 2017-03-20 7:19 ` Florent Jacquet
2017-03-20 7:29 ` Maxime Ripard
2017-03-20 18:58 ` Maxime Ripard
0 siblings, 2 replies; 9+ messages in thread
From: Florent Jacquet @ 2017-03-20 7:19 UTC (permalink / raw)
To: u-boot
On 13/03/2017 09:42, Florent Jacquet wrote:
> On 06/03/2017 13:19, Florent Jacquet wrote:
>> On 16/02/2017 19:32, Maxime Ripard wrote:
>>> On Thu, Feb 16, 2017 at 11:46:42AM +0100, Florent Jacquet wrote:
>>>> This enables the support for the Allwinner A23 Evaluation Board (EVB),
>>>> that already had a device tree (from Linux) but no defconfig.
>>>>
>>>> This board has an AXP223 PMIC, some NAND, Audio out and in plugs, an
>>>> accelerometer and light sensor, as well as a USB HSIC hub and a USB
>>>> OTG mini-USB connector. It also has a Wifi/BT chip.
>>>>
>>>> Access to the other buses (LCD, MIPI DSI, LVDS, etc) can be done
>>>> through dedicated pin headers.
>>>>
>>>> Signed-off-by: Florent Jacquet <florent.jacquet@free-electrons.com>
>>>> Cc: Jagan Teki <jagan@openedev.com>
>>>> Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
>>>
>>> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
>>>
>>> Thanks!
>>> Maxime
>>>
>>
>> Hello,
>>
>> Any updates on this patch?
>>
>> Thanks
>> Florent
>>
>
> Hello,
>
> Has somebody any news concerning this patch?
>
> Thanks
> Florent
>
Hello,
Has someone seen this patch? Is there any update?
Regards
Florent
--
Florent Jacquet, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH] sunxi: Add defconfig for Allwinner A23 EVB
2017-03-20 7:19 ` Florent Jacquet
@ 2017-03-20 7:29 ` Maxime Ripard
2017-03-20 18:58 ` Maxime Ripard
1 sibling, 0 replies; 9+ messages in thread
From: Maxime Ripard @ 2017-03-20 7:29 UTC (permalink / raw)
To: u-boot
On Mon, Mar 20, 2017 at 08:19:14AM +0100, Florent Jacquet wrote:
> On 13/03/2017 09:42, Florent Jacquet wrote:
> > On 06/03/2017 13:19, Florent Jacquet wrote:
> >> On 16/02/2017 19:32, Maxime Ripard wrote:
> >>> On Thu, Feb 16, 2017 at 11:46:42AM +0100, Florent Jacquet wrote:
> >>>> This enables the support for the Allwinner A23 Evaluation Board (EVB),
> >>>> that already had a device tree (from Linux) but no defconfig.
> >>>>
> >>>> This board has an AXP223 PMIC, some NAND, Audio out and in plugs, an
> >>>> accelerometer and light sensor, as well as a USB HSIC hub and a USB
> >>>> OTG mini-USB connector. It also has a Wifi/BT chip.
> >>>>
> >>>> Access to the other buses (LCD, MIPI DSI, LVDS, etc) can be done
> >>>> through dedicated pin headers.
> >>>>
> >>>> Signed-off-by: Florent Jacquet <florent.jacquet@free-electrons.com>
> >>>> Cc: Jagan Teki <jagan@openedev.com>
> >>>> Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
> >>>
> >>> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> >>>
> >>> Thanks!
> >>> Maxime
> >>>
> >>
> >> Hello,
> >>
> >> Any updates on this patch?
> >>
> >> Thanks
> >> Florent
> >>
> >
> > Hello,
> >
> > Has somebody any news concerning this patch?
> >
> > Thanks
> > Florent
> >
>
> Hello,
>
> Has someone seen this patch? Is there any update?
Jagan, could you apply this please?
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170320/9014e498/attachment.sig>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH] sunxi: Add defconfig for Allwinner A23 EVB
2017-03-20 7:19 ` Florent Jacquet
2017-03-20 7:29 ` Maxime Ripard
@ 2017-03-20 18:58 ` Maxime Ripard
2017-03-21 7:11 ` Florent Jacquet
1 sibling, 1 reply; 9+ messages in thread
From: Maxime Ripard @ 2017-03-20 18:58 UTC (permalink / raw)
To: u-boot
1;4601;0c
On Mon, Mar 20, 2017 at 08:19:14AM +0100, Florent Jacquet wrote:
> On 13/03/2017 09:42, Florent Jacquet wrote:
> > On 06/03/2017 13:19, Florent Jacquet wrote:
> >> On 16/02/2017 19:32, Maxime Ripard wrote:
> >>> On Thu, Feb 16, 2017 at 11:46:42AM +0100, Florent Jacquet wrote:
> >>>> This enables the support for the Allwinner A23 Evaluation Board (EVB),
> >>>> that already had a device tree (from Linux) but no defconfig.
> >>>>
> >>>> This board has an AXP223 PMIC, some NAND, Audio out and in plugs, an
> >>>> accelerometer and light sensor, as well as a USB HSIC hub and a USB
> >>>> OTG mini-USB connector. It also has a Wifi/BT chip.
> >>>>
> >>>> Access to the other buses (LCD, MIPI DSI, LVDS, etc) can be done
> >>>> through dedicated pin headers.
> >>>>
> >>>> Signed-off-by: Florent Jacquet <florent.jacquet@free-electrons.com>
> >>>> Cc: Jagan Teki <jagan@openedev.com>
> >>>> Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
> >>>
> >>> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> >>>
> >>> Thanks!
> >>> Maxime
> >>>
> >>
> >> Hello,
> >>
> >> Any updates on this patch?
> >>
> >> Thanks
> >> Florent
> >>
> >
> > Hello,
> >
> > Has somebody any news concerning this patch?
> >
> > Thanks
> > Florent
> >
>
> Hello,
>
> Has someone seen this patch? Is there any update?
I just applied it.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170320/b407be9d/attachment.sig>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH] sunxi: Add defconfig for Allwinner A23 EVB
2017-03-20 18:58 ` Maxime Ripard
@ 2017-03-21 7:11 ` Florent Jacquet
0 siblings, 0 replies; 9+ messages in thread
From: Florent Jacquet @ 2017-03-21 7:11 UTC (permalink / raw)
To: u-boot
On 20/03/2017 19:58, Maxime Ripard wrote:
> 1;4601;0c
> On Mon, Mar 20, 2017 at 08:19:14AM +0100, Florent Jacquet wrote:
>> On 13/03/2017 09:42, Florent Jacquet wrote:
>>> On 06/03/2017 13:19, Florent Jacquet wrote:
>>>> On 16/02/2017 19:32, Maxime Ripard wrote:
>>>>> On Thu, Feb 16, 2017 at 11:46:42AM +0100, Florent Jacquet wrote:
>>>>>> This enables the support for the Allwinner A23 Evaluation Board (EVB),
>>>>>> that already had a device tree (from Linux) but no defconfig.
>>>>>>
>>>>>> This board has an AXP223 PMIC, some NAND, Audio out and in plugs, an
>>>>>> accelerometer and light sensor, as well as a USB HSIC hub and a USB
>>>>>> OTG mini-USB connector. It also has a Wifi/BT chip.
>>>>>>
>>>>>> Access to the other buses (LCD, MIPI DSI, LVDS, etc) can be done
>>>>>> through dedicated pin headers.
>>>>>>
>>>>>> Signed-off-by: Florent Jacquet <florent.jacquet@free-electrons.com>
>>>>>> Cc: Jagan Teki <jagan@openedev.com>
>>>>>> Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
>>>>>
>>>>> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
>>>>>
>>>>> Thanks!
>>>>> Maxime
>>>>>
>>>>
>>>> Hello,
>>>>
>>>> Any updates on this patch?
>>>>
>>>> Thanks
>>>> Florent
>>>>
>>>
>>> Hello,
>>>
>>> Has somebody any news concerning this patch?
>>>
>>> Thanks
>>> Florent
>>>
>>
>> Hello,
>>
>> Has someone seen this patch? Is there any update?
>
> I just applied it.
>
> Maxime
>
Thanks! :)
Florent
--
Florent Jacquet, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH] sunxi: Add defconfig for Allwinner A23 EVB
@ 2017-02-15 16:03 Florent Jacquet
0 siblings, 0 replies; 9+ messages in thread
From: Florent Jacquet @ 2017-02-15 16:03 UTC (permalink / raw)
To: u-boot
This enables the support for the Allwinner A23 Evaluation Board (EVB),
that already had a device tree (from Linux) but no defconfig.
This board has an AXP223 PMIC, some NAND, Audio out and in plugs, an
accelerometer and light sensor, as well as a USB HSIC hub and a USB
OTG mini-USB connector. It also has a Wifi/BT chip.
Access to the other buses (LCD, MIPI DSI, LVDS, etc) can be done
through dedicated pin headers.
Signed-off-by: Florent Jacquet <florent.jacquet@free-electrons.com>
---
configs/sun8i_a23_evb_defconfig | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
create mode 100644 configs/sun8i_a23_evb_defconfig
diff --git a/configs/sun8i_a23_evb_defconfig b/configs/sun8i_a23_evb_defconfig
new file mode 100644
index 0000000..296df00
--- /dev/null
+++ b/configs/sun8i_a23_evb_defconfig
@@ -0,0 +1,19 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_A23=y
+CONFIG_DRAM_CLK=552
+CONFIG_DRAM_ZQ=63351
+CONFIG_USB0_VBUS_PIN="axp_drivebus"
+CONFIG_USB0_VBUS_DET="axp_vbus_detect"
+CONFIG_USB1_VBUS_PIN="PH7"
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-evb"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_USB_EHCI_HCD=y
--
2.7.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
end of thread, other threads:[~2017-03-21 7:11 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-16 10:46 [U-Boot] [PATCH] sunxi: Add defconfig for Allwinner A23 EVB Florent Jacquet
2017-02-16 18:32 ` Maxime Ripard
2017-03-06 12:19 ` Florent Jacquet
2017-03-13 8:42 ` Florent Jacquet
2017-03-20 7:19 ` Florent Jacquet
2017-03-20 7:29 ` Maxime Ripard
2017-03-20 18:58 ` Maxime Ripard
2017-03-21 7:11 ` Florent Jacquet
-- strict thread matches above, loose matches on Subject: below --
2017-02-15 16:03 Florent Jacquet
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.