New kernel recommendations for ath9k

New kernel recommendations for ath9k

[Luis R. Rodriguez]

For those not subscribed to the ath9k wiki on wireless.kernel.org [1]
(which we recommend you do if you're a user) here's a quick note to
let you know our latest kernel recommendations for using ath9k:

  *  >= 2.6.27.22
  *  >= 2.6.28.10
  *  2.6.29

If you want 802.11n support or AP support you'll want at least 2.6.29.
If you happen to have one of our new 1x1 AR9285 devices (all AR9285
devices are 1x1) then you'll need at least 2.6.29. If you want to
start using ath9k on APs with AHB you will need at least 2.6.30 (still
in RC series).

As usual if you happen to be stuck on older kernels for one reason or
another you can always use compat-wireless [2] and if that happens to
be a little too bleeding edge we have now compat-wireless releases for
stable kernel releases, starting as of the 2.6.30-rc series [3].

  Luis

[1] http://wireless.kernel.org/en/users/Drivers/ath9k
[2] http://wireless.kernel.org/en/users/Download
[3] http://wireless.kernel.org/en/users/Download/stable

New kernel recommendations for ath9k

[Luis R. Rodriguez]

For those not subscribed to the ath9k wiki on wireless.kernel.org [1]
(which we recommend you do if you're a user) here's a quick note to
let you know our latest kernel recommendations for using ath9k:

  *  >= 2.6.27.22
  *  >= 2.6.28.10
  *  2.6.29

If you want 802.11n support or AP support you'll want at least 2.6.29.
If you happen to have one of our new 1x1 AR9285 devices (all AR9285
devices are 1x1) then you'll need at least 2.6.29. If you want to
start using ath9k on APs with AHB you will need at least 2.6.30 (still
in RC series).

As usual if you happen to be stuck on older kernels for one reason or
another you can always use compat-wireless [2] and if that happens to
be a little too bleeding edge we have now compat-wireless releases for
stable kernel releases, starting as of the 2.6.30-rc series [3].

  Luis

[1] http://wireless.kernel.org/en/users/Drivers/ath9k
[2] http://wireless.kernel.org/en/users/Download
[3] http://wireless.kernel.org/en/users/Download/stable

[ath9k-devel] New kernel recommendations for ath9k

[Luis R. Rodriguez]

For those not subscribed to the ath9k wiki on wireless.kernel.org [1]
(which we recommend you do if you're a user) here's a quick note to
let you know our latest kernel recommendations for using ath9k:

  *  >= 2.6.27.22
  *  >= 2.6.28.10
  *  2.6.29

If you want 802.11n support or AP support you'll want at least 2.6.29.
If you happen to have one of our new 1x1 AR9285 devices (all AR9285
devices are 1x1) then you'll need at least 2.6.29. If you want to
start using ath9k on APs with AHB you will need at least 2.6.30 (still
in RC series).

As usual if you happen to be stuck on older kernels for one reason or
another you can always use compat-wireless [2] and if that happens to
be a little too bleeding edge we have now compat-wireless releases for
stable kernel releases, starting as of the 2.6.30-rc series [3].

  Luis

[1] http://wireless.kernel.org/en/users/Drivers/ath9k
[2] http://wireless.kernel.org/en/users/Download
[3] http://wireless.kernel.org/en/users/Download/stable

Re: [ath9k-devel] New kernel recommendations for ath9k

[Karl Hiramoto]

Luis R. Rodriguez wrote:
> For those not subscribed to the ath9k wiki on wireless.kernel.org [1]
> (which we recommend you do if you're a user) here's a quick note to
> let you know our latest kernel recommendations for using ath9k:
>
>   *  >= 2.6.27.22
>   *  >= 2.6.28.10
>   *  2.6.29
>
> If you want 802.11n support or AP support you'll want at least 2.6.29.
> If you happen to have one of our new 1x1 AR9285 devices (all AR9285
> devices are 1x1) then you'll need at least 2.6.29. If you want to
> start using ath9k on APs with AHB you will need at least 2.6.30 (still
> in RC series).
>
> As usual if you happen to be stuck on older kernels for one reason or
> another you can always use compat-wireless [2] and if that happens to
> be a little too bleeding edge we have now compat-wireless releases for
> stable kernel releases, starting as of the 2.6.30-rc series [3].
>
>   Luis
>
> [1] http://wireless.kernel.org/en/users/Drivers/ath9k
> [2] http://wireless.kernel.org/en/users/Download
> [3] http://wireless.kernel.org/en/users/Download/stable
>   
Thanks for the update.  If i want to use multiple AP's with Ath9k it it 
still best to use wireless-testing?  Is multiple AP support in 2.6.30-rc 
series net-next or wireless-next?

Thanks.
--
Karl

Re: [ath9k-devel] New kernel recommendations for ath9k

[Karl Hiramoto]

Luis R. Rodriguez wrote:
> For those not subscribed to the ath9k wiki on wireless.kernel.org [1]
> (which we recommend you do if you're a user) here's a quick note to
> let you know our latest kernel recommendations for using ath9k:
>
>   *  >= 2.6.27.22
>   *  >= 2.6.28.10
>   *  2.6.29
>
> If you want 802.11n support or AP support you'll want at least 2.6.29.
> If you happen to have one of our new 1x1 AR9285 devices (all AR9285
> devices are 1x1) then you'll need at least 2.6.29. If you want to
> start using ath9k on APs with AHB you will need at least 2.6.30 (still
> in RC series).
>
> As usual if you happen to be stuck on older kernels for one reason or
> another you can always use compat-wireless [2] and if that happens to
> be a little too bleeding edge we have now compat-wireless releases for
> stable kernel releases, starting as of the 2.6.30-rc series [3].
>
>   Luis
>
> [1] http://wireless.kernel.org/en/users/Drivers/ath9k
> [2] http://wireless.kernel.org/en/users/Download
> [3] http://wireless.kernel.org/en/users/Download/stable
>   
Thanks for the update.  If i want to use multiple AP's with Ath9k it it 
still best to use wireless-testing?  Is multiple AP support in 2.6.30-rc 
series net-next or wireless-next?

Thanks.
--
Karl

[ath9k-devel] New kernel recommendations for ath9k

[Karl Hiramoto]

Luis R. Rodriguez wrote:
> For those not subscribed to the ath9k wiki on wireless.kernel.org [1]
> (which we recommend you do if you're a user) here's a quick note to
> let you know our latest kernel recommendations for using ath9k:
>
>   *  >= 2.6.27.22
>   *  >= 2.6.28.10
>   *  2.6.29
>
> If you want 802.11n support or AP support you'll want at least 2.6.29.
> If you happen to have one of our new 1x1 AR9285 devices (all AR9285
> devices are 1x1) then you'll need at least 2.6.29. If you want to
> start using ath9k on APs with AHB you will need at least 2.6.30 (still
> in RC series).
>
> As usual if you happen to be stuck on older kernels for one reason or
> another you can always use compat-wireless [2] and if that happens to
> be a little too bleeding edge we have now compat-wireless releases for
> stable kernel releases, starting as of the 2.6.30-rc series [3].
>
>   Luis
>
> [1] http://wireless.kernel.org/en/users/Drivers/ath9k
> [2] http://wireless.kernel.org/en/users/Download
> [3] http://wireless.kernel.org/en/users/Download/stable
>   
Thanks for the update.  If i want to use multiple AP's with Ath9k it it 
still best to use wireless-testing?  Is multiple AP support in 2.6.30-rc 
series net-next or wireless-next?

Thanks.
--
Karl

Re: [ath9k-devel] New kernel recommendations for ath9k

[Luis R. Rodriguez]

On Thu, May 7, 2009 at 3:02 AM, Karl Hiramoto <karl@hiramoto.org> wrote=
:
> Luis R. Rodriguez wrote:
>>
>> For those not subscribed to the ath9k wiki on wireless.kernel.org [1=
]
>> (which we recommend you do if you're a user) here's a quick note to
>> let you know our latest kernel recommendations for using ath9k:
>>
>> =C2=A0* =C2=A0>=3D 2.6.27.22
>> =C2=A0* =C2=A0>=3D 2.6.28.10
>> =C2=A0* =C2=A02.6.29
>>
>> If you want 802.11n support or AP support you'll want at least 2.6.2=
9.
>> If you happen to have one of our new 1x1 AR9285 devices (all AR9285
>> devices are 1x1) then you'll need at least 2.6.29. If you want to
>> start using ath9k on APs with AHB you will need at least 2.6.30 (sti=
ll
>> in RC series).
>>
>> As usual if you happen to be stuck on older kernels for one reason o=
r
>> another you can always use compat-wireless [2] and if that happens t=
o
>> be a little too bleeding edge we have now compat-wireless releases f=
or
>> stable kernel releases, starting as of the 2.6.30-rc series [3].
>>
>> =C2=A0Luis
>>
>> [1] http://wireless.kernel.org/en/users/Drivers/ath9k
>> [2] http://wireless.kernel.org/en/users/Download
>> [3] http://wireless.kernel.org/en/users/Download/stable
>>
>
> Thanks for the update. =C2=A0If i want to use multiple AP's with Ath9=
k it it
> still best to use wireless-testing? =C2=A0Is multiple AP support in 2=
=2E6.30-rc
> series net-next or wireless-next?

Yeah wireless-testing is best for that. I should also mention that if
you want to use AP mode you want to be at least on 2.6.29 (your own
kernel, not the compat-wireless one) if you care about Power Save
buffering on the AP as otherwise even if you use a compat-wireless
with code from > 2.6.29 those frames will be dropped. IIRC its due to
the way we use skb->cb for this and there not being a clean way to
backport this (so we just drop them).

  Luis
--
To unsubscribe from this list: send the line "unsubscribe linux-wireles=
s" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [ath9k-devel] New kernel recommendations for ath9k

[Luis R. Rodriguez]

On Thu, May 7, 2009 at 3:02 AM, Karl Hiramoto <karl@hiramoto.org> wrote:
> Luis R. Rodriguez wrote:
>>
>> For those not subscribed to the ath9k wiki on wireless.kernel.org [1]
>> (which we recommend you do if you're a user) here's a quick note to
>> let you know our latest kernel recommendations for using ath9k:
>>
>>  *  >= 2.6.27.22
>>  *  >= 2.6.28.10
>>  *  2.6.29
>>
>> If you want 802.11n support or AP support you'll want at least 2.6.29.
>> If you happen to have one of our new 1x1 AR9285 devices (all AR9285
>> devices are 1x1) then you'll need at least 2.6.29. If you want to
>> start using ath9k on APs with AHB you will need at least 2.6.30 (still
>> in RC series).
>>
>> As usual if you happen to be stuck on older kernels for one reason or
>> another you can always use compat-wireless [2] and if that happens to
>> be a little too bleeding edge we have now compat-wireless releases for
>> stable kernel releases, starting as of the 2.6.30-rc series [3].
>>
>>  Luis
>>
>> [1] http://wireless.kernel.org/en/users/Drivers/ath9k
>> [2] http://wireless.kernel.org/en/users/Download
>> [3] http://wireless.kernel.org/en/users/Download/stable
>>
>
> Thanks for the update.  If i want to use multiple AP's with Ath9k it it
> still best to use wireless-testing?  Is multiple AP support in 2.6.30-rc
> series net-next or wireless-next?

Yeah wireless-testing is best for that. I should also mention that if
you want to use AP mode you want to be at least on 2.6.29 (your own
kernel, not the compat-wireless one) if you care about Power Save
buffering on the AP as otherwise even if you use a compat-wireless
with code from > 2.6.29 those frames will be dropped. IIRC its due to
the way we use skb->cb for this and there not being a clean way to
backport this (so we just drop them).

  Luis

[ath9k-devel] New kernel recommendations for ath9k

[Luis R. Rodriguez]

On Thu, May 7, 2009 at 3:02 AM, Karl Hiramoto <karl@hiramoto.org> wrote:
> Luis R. Rodriguez wrote:
>>
>> For those not subscribed to the ath9k wiki on wireless.kernel.org [1]
>> (which we recommend you do if you're a user) here's a quick note to
>> let you know our latest kernel recommendations for using ath9k:
>>
>> ?* ?>= 2.6.27.22
>> ?* ?>= 2.6.28.10
>> ?* ?2.6.29
>>
>> If you want 802.11n support or AP support you'll want at least 2.6.29.
>> If you happen to have one of our new 1x1 AR9285 devices (all AR9285
>> devices are 1x1) then you'll need at least 2.6.29. If you want to
>> start using ath9k on APs with AHB you will need at least 2.6.30 (still
>> in RC series).
>>
>> As usual if you happen to be stuck on older kernels for one reason or
>> another you can always use compat-wireless [2] and if that happens to
>> be a little too bleeding edge we have now compat-wireless releases for
>> stable kernel releases, starting as of the 2.6.30-rc series [3].
>>
>> ?Luis
>>
>> [1] http://wireless.kernel.org/en/users/Drivers/ath9k
>> [2] http://wireless.kernel.org/en/users/Download
>> [3] http://wireless.kernel.org/en/users/Download/stable
>>
>
> Thanks for the update. ?If i want to use multiple AP's with Ath9k it it
> still best to use wireless-testing? ?Is multiple AP support in 2.6.30-rc
> series net-next or wireless-next?

Yeah wireless-testing is best for that. I should also mention that if
you want to use AP mode you want to be at least on 2.6.29 (your own
kernel, not the compat-wireless one) if you care about Power Save
buffering on the AP as otherwise even if you use a compat-wireless
with code from > 2.6.29 those frames will be dropped. IIRC its due to
the way we use skb->cb for this and there not being a clean way to
backport this (so we just drop them).

  Luis

Re: [ath9k-devel] New kernel recommendations for ath9k

[Johannes Berg]

[-- Attachment #1: Type: text/plain, Size: 603 bytes --]

On Sat, 2009-05-09 at 01:50 -0400, Jason Daly wrote:
> Thanks for the kernel info.
> 
> How do you configure hostapd to work in N mode with ath9k?  Currently 
> the hw_mode parameter found in hostapd.conf does not accept anything 
> greater than g.

N isn't "greater than" G. N is more features than G. Just set the N
options in the config file. You may need a git hostapd, I don't know for
sure.

Also, please set your clock and timezone correctly _before_ you say
"thank you"!. You have posted on
	Sat, 09 May 2009 01:50:12 -0400 (07:50 CEST)

which is clearly impossible.

johannes

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

Re: [ath9k-devel] New kernel recommendations for ath9k

[Johannes Berg]

[-- Attachment #1: Type: text/plain, Size: 603 bytes --]

On Sat, 2009-05-09 at 01:50 -0400, Jason Daly wrote:
> Thanks for the kernel info.
> 
> How do you configure hostapd to work in N mode with ath9k?  Currently 
> the hw_mode parameter found in hostapd.conf does not accept anything 
> greater than g.

N isn't "greater than" G. N is more features than G. Just set the N
options in the config file. You may need a git hostapd, I don't know for
sure.

Also, please set your clock and timezone correctly _before_ you say
"thank you"!. You have posted on
	Sat, 09 May 2009 01:50:12 -0400 (07:50 CEST)

which is clearly impossible.

johannes

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

[ath9k-devel] New kernel recommendations for ath9k

[Johannes Berg]

On Sat, 2009-05-09 at 01:50 -0400, Jason Daly wrote:
> Thanks for the kernel info.
> 
> How do you configure hostapd to work in N mode with ath9k?  Currently 
> the hw_mode parameter found in hostapd.conf does not accept anything 
> greater than g.

N isn't "greater than" G. N is more features than G. Just set the N
options in the config file. You may need a git hostapd, I don't know for
sure.

Also, please set your clock and timezone correctly _before_ you say
"thank you"!. You have posted on
	Sat, 09 May 2009 01:50:12 -0400 (07:50 CEST)

which is clearly impossible.

johannes
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 801 bytes
Desc: This is a digitally signed message part
Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20090508/3838a1a6/attachment.pgp 

Re: [ath9k-devel] New kernel recommendations for ath9k

[Luis R. Rodriguez]

On Fri, May 08, 2009 at 02:02:04AM -0700, Johannes Berg wrote:
> On Sat, 2009-05-09 at 01:50 -0400, Jason Daly wrote:
> > Thanks for the kernel info.
> >
> > How do you configure hostapd to work in N mode with ath9k?  Currently
> > the hw_mode parameter found in hostapd.conf does not accept anything
> > greater than g.
> 
> N isn't "greater than" G. N is more features than G. Just set the N
> options in the config file. You may need a git hostapd, I don't know for
> sure.
> 
> Also, please set your clock and timezone correctly _before_ you say
> "thank you"!. You have posted on
>         Sat, 09 May 2009 01:50:12 -0400 (07:50 CEST)
> 
> which is clearly impossible.
> 
Also check out:

http://wireless.kernel.org/en/users/Documentation/hostapd

  Luis

Re: [ath9k-devel] New kernel recommendations for ath9k

[Luis R. Rodriguez]

On Fri, May 08, 2009 at 02:02:04AM -0700, Johannes Berg wrote:
> On Sat, 2009-05-09 at 01:50 -0400, Jason Daly wrote:
> > Thanks for the kernel info.
> >
> > How do you configure hostapd to work in N mode with ath9k?  Currently
> > the hw_mode parameter found in hostapd.conf does not accept anything
> > greater than g.
> 
> N isn't "greater than" G. N is more features than G. Just set the N
> options in the config file. You may need a git hostapd, I don't know for
> sure.
> 
> Also, please set your clock and timezone correctly _before_ you say
> "thank you"!. You have posted on
>         Sat, 09 May 2009 01:50:12 -0400 (07:50 CEST)
> 
> which is clearly impossible.
> 
Also check out:

http://wireless.kernel.org/en/users/Documentation/hostapd

  Luis

[ath9k-devel] New kernel recommendations for ath9k

[Luis R. Rodriguez]

On Fri, May 08, 2009 at 02:02:04AM -0700, Johannes Berg wrote:
> On Sat, 2009-05-09 at 01:50 -0400, Jason Daly wrote:
> > Thanks for the kernel info.
> >
> > How do you configure hostapd to work in N mode with ath9k?  Currently
> > the hw_mode parameter found in hostapd.conf does not accept anything
> > greater than g.
> 
> N isn't "greater than" G. N is more features than G. Just set the N
> options in the config file. You may need a git hostapd, I don't know for
> sure.
> 
> Also, please set your clock and timezone correctly _before_ you say
> "thank you"!. You have posted on
>         Sat, 09 May 2009 01:50:12 -0400 (07:50 CEST)
> 
> which is clearly impossible.
> 
Also check out:

http://wireless.kernel.org/en/users/Documentation/hostapd

  Luis

Re: [ath9k-devel] New kernel recommendations for ath9k

[Jason Daly]

Thanks for the kernel info.

How do you configure hostapd to work in N mode with ath9k?  Currently 
the hw_mode parameter found in hostapd.conf does not accept anything 
greater than g.

Thanks
-JD

Luis R. Rodriguez wrote:
> On Thu, May 7, 2009 at 3:02 AM, Karl Hiramoto <karl@hiramoto.org> wrote:
>> Luis R. Rodriguez wrote:
>>> For those not subscribed to the ath9k wiki on wireless.kernel.org [1]
>>> (which we recommend you do if you're a user) here's a quick note to
>>> let you know our latest kernel recommendations for using ath9k:
>>>
>>>  *  >= 2.6.27.22
>>>  *  >= 2.6.28.10
>>>  *  2.6.29
>>>
>>> If you want 802.11n support or AP support you'll want at least 2.6.29.
>>> If you happen to have one of our new 1x1 AR9285 devices (all AR9285
>>> devices are 1x1) then you'll need at least 2.6.29. If you want to
>>> start using ath9k on APs with AHB you will need at least 2.6.30 (still
>>> in RC series).
>>>
>>> As usual if you happen to be stuck on older kernels for one reason or
>>> another you can always use compat-wireless [2] and if that happens to
>>> be a little too bleeding edge we have now compat-wireless releases for
>>> stable kernel releases, starting as of the 2.6.30-rc series [3].
>>>
>>>  Luis
>>>
>>> [1] http://wireless.kernel.org/en/users/Drivers/ath9k
>>> [2] http://wireless.kernel.org/en/users/Download
>>> [3] http://wireless.kernel.org/en/users/Download/stable
>>>
>> Thanks for the update.  If i want to use multiple AP's with Ath9k it it
>> still best to use wireless-testing?  Is multiple AP support in 2.6.30-rc
>> series net-next or wireless-next?
> 
> Yeah wireless-testing is best for that. I should also mention that if
> you want to use AP mode you want to be at least on 2.6.29 (your own
> kernel, not the compat-wireless one) if you care about Power Save
> buffering on the AP as otherwise even if you use a compat-wireless
> with code from > 2.6.29 those frames will be dropped. IIRC its due to
> the way we use skb->cb for this and there not being a clean way to
> backport this (so we just drop them).
> 
>   Luis
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel@lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel

Re: [ath9k-devel] New kernel recommendations for ath9k

[Jason Daly]

Thanks for the kernel info.

How do you configure hostapd to work in N mode with ath9k?  Currently 
the hw_mode parameter found in hostapd.conf does not accept anything 
greater than g.

Thanks
-JD

Luis R. Rodriguez wrote:
> On Thu, May 7, 2009 at 3:02 AM, Karl Hiramoto <karl@hiramoto.org> wrote:
>> Luis R. Rodriguez wrote:
>>> For those not subscribed to the ath9k wiki on wireless.kernel.org [1]
>>> (which we recommend you do if you're a user) here's a quick note to
>>> let you know our latest kernel recommendations for using ath9k:
>>>
>>>  *  >= 2.6.27.22
>>>  *  >= 2.6.28.10
>>>  *  2.6.29
>>>
>>> If you want 802.11n support or AP support you'll want at least 2.6.29.
>>> If you happen to have one of our new 1x1 AR9285 devices (all AR9285
>>> devices are 1x1) then you'll need at least 2.6.29. If you want to
>>> start using ath9k on APs with AHB you will need at least 2.6.30 (still
>>> in RC series).
>>>
>>> As usual if you happen to be stuck on older kernels for one reason or
>>> another you can always use compat-wireless [2] and if that happens to
>>> be a little too bleeding edge we have now compat-wireless releases for
>>> stable kernel releases, starting as of the 2.6.30-rc series [3].
>>>
>>>  Luis
>>>
>>> [1] http://wireless.kernel.org/en/users/Drivers/ath9k
>>> [2] http://wireless.kernel.org/en/users/Download
>>> [3] http://wireless.kernel.org/en/users/Download/stable
>>>
>> Thanks for the update.  If i want to use multiple AP's with Ath9k it it
>> still best to use wireless-testing?  Is multiple AP support in 2.6.30-rc
>> series net-next or wireless-next?
> 
> Yeah wireless-testing is best for that. I should also mention that if
> you want to use AP mode you want to be at least on 2.6.29 (your own
> kernel, not the compat-wireless one) if you care about Power Save
> buffering on the AP as otherwise even if you use a compat-wireless
> with code from > 2.6.29 those frames will be dropped. IIRC its due to
> the way we use skb->cb for this and there not being a clean way to
> backport this (so we just drop them).
> 
>   Luis
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel@lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel

[ath9k-devel] New kernel recommendations for ath9k

[Jason Daly]

Thanks for the kernel info.

How do you configure hostapd to work in N mode with ath9k?  Currently 
the hw_mode parameter found in hostapd.conf does not accept anything 
greater than g.

Thanks
-JD

Luis R. Rodriguez wrote:
> On Thu, May 7, 2009 at 3:02 AM, Karl Hiramoto <karl@hiramoto.org> wrote:
>> Luis R. Rodriguez wrote:
>>> For those not subscribed to the ath9k wiki on wireless.kernel.org [1]
>>> (which we recommend you do if you're a user) here's a quick note to
>>> let you know our latest kernel recommendations for using ath9k:
>>>
>>>  *  >= 2.6.27.22
>>>  *  >= 2.6.28.10
>>>  *  2.6.29
>>>
>>> If you want 802.11n support or AP support you'll want at least 2.6.29.
>>> If you happen to have one of our new 1x1 AR9285 devices (all AR9285
>>> devices are 1x1) then you'll need at least 2.6.29. If you want to
>>> start using ath9k on APs with AHB you will need at least 2.6.30 (still
>>> in RC series).
>>>
>>> As usual if you happen to be stuck on older kernels for one reason or
>>> another you can always use compat-wireless [2] and if that happens to
>>> be a little too bleeding edge we have now compat-wireless releases for
>>> stable kernel releases, starting as of the 2.6.30-rc series [3].
>>>
>>>  Luis
>>>
>>> [1] http://wireless.kernel.org/en/users/Drivers/ath9k
>>> [2] http://wireless.kernel.org/en/users/Download
>>> [3] http://wireless.kernel.org/en/users/Download/stable
>>>
>> Thanks for the update.  If i want to use multiple AP's with Ath9k it it
>> still best to use wireless-testing?  Is multiple AP support in 2.6.30-rc
>> series net-next or wireless-next?
> 
> Yeah wireless-testing is best for that. I should also mention that if
> you want to use AP mode you want to be at least on 2.6.29 (your own
> kernel, not the compat-wireless one) if you care about Power Save
> buffering on the AP as otherwise even if you use a compat-wireless
> with code from > 2.6.29 those frames will be dropped. IIRC its due to
> the way we use skb->cb for this and there not being a clean way to
> backport this (so we just drop them).
> 
>   Luis
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel