* [U-Boot] [PATCH 6/9] ARM: mvebu: add support for boot from SATA
[not found] <cover.1557997586.git.baruch@tkos.co.il>
@ 2019-05-16 10:03 ` Baruch Siach
2019-05-16 10:11 ` Baruch Siach
2019-05-16 10:04 ` [U-Boot] [PATCH 7/9] ARM: dts: clearfog: enable SATA in SPL Baruch Siach
1 sibling, 1 reply; 3+ messages in thread
From: Baruch Siach @ 2019-05-16 10:03 UTC (permalink / raw)
To: u-boot
Add the required Kconfig and macro definitions to allow boot from SATA
on Armada 38x systems.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
arch/arm/mach-mvebu/Kconfig | 5 +++++
arch/arm/mach-mvebu/Makefile | 3 +++
arch/arm/mach-mvebu/include/mach/soc.h | 2 ++
arch/arm/mach-mvebu/spl.c | 5 +++++
4 files changed, 15 insertions(+)
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 495c48e6c749..fdd39685b75d 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -239,6 +239,11 @@ config MVEBU_SPL_BOOT_DEVICE_MMC
bool "SDIO/MMC card"
select SPL_LIBDISK_SUPPORT
+config MVEBU_SPL_BOOT_DEVICE_SATA
+ bool "SATA"
+ select SPL_SATA_SUPPORT
+ select SPL_LIBDISK_SUPPORT
+
config MVEBU_SPL_BOOT_DEVICE_UART
bool "UART"
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 02d3ce27ee74..8228a17972f9 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -37,6 +37,9 @@ endif
ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC),)
KWB_CFG_BOOT_FROM=sdio
endif
+ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_SATA),)
+ KWB_CFG_BOOT_FROM=sata
+endif
ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_UART),)
KWB_CFG_BOOT_FROM=uart
endif
diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h
index f666ee24243b..acb9257c90fe 100644
--- a/arch/arm/mach-mvebu/include/mach/soc.h
+++ b/arch/arm/mach-mvebu/include/mach/soc.h
@@ -159,7 +159,9 @@
#define BOOT_DEV_SEL_MASK (0x3f << BOOT_DEV_SEL_OFFS)
#define BOOT_FROM_NAND 0x0A
+#define BOOT_FROM_SATA 0x22
#define BOOT_FROM_UART 0x28
+#define BOOT_FROM_SATA_ALT 0x2A
#define BOOT_FROM_UART_ALT 0x3f
#define BOOT_FROM_SPI 0x32
#define BOOT_FROM_MMC 0x30
diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c
index 530b98c1aa31..d54de5195624 100644
--- a/arch/arm/mach-mvebu/spl.c
+++ b/arch/arm/mach-mvebu/spl.c
@@ -59,6 +59,11 @@ static u32 get_boot_device(void)
case BOOT_FROM_UART_ALT:
#endif
return BOOT_DEVICE_UART;
+#ifdef BOOT_FROM_SATA
+ case BOOT_FROM_SATA:
+ case BOOT_FROM_SATA_ALT:
+ return BOOT_DEVICE_SATA;
+#endif
case BOOT_FROM_SPI:
default:
return BOOT_DEVICE_SPI;
--
2.20.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH 7/9] ARM: dts: clearfog: enable SATA in SPL
[not found] <cover.1557997586.git.baruch@tkos.co.il>
2019-05-16 10:03 ` [U-Boot] [PATCH 6/9] ARM: mvebu: add support for boot from SATA Baruch Siach
@ 2019-05-16 10:04 ` Baruch Siach
1 sibling, 0 replies; 3+ messages in thread
From: Baruch Siach @ 2019-05-16 10:04 UTC (permalink / raw)
To: u-boot
Enable SATA peripherals in SPL to allow boot from SATA.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
arch/arm/dts/armada-388-clearfog-u-boot.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/dts/armada-388-clearfog-u-boot.dtsi b/arch/arm/dts/armada-388-clearfog-u-boot.dtsi
index a12694e17103..cf6c08881b18 100644
--- a/arch/arm/dts/armada-388-clearfog-u-boot.dtsi
+++ b/arch/arm/dts/armada-388-clearfog-u-boot.dtsi
@@ -11,3 +11,11 @@
&sdhci {
u-boot,dm-spl;
};
+
+&ahci0 {
+ u-boot,dm-spl;
+};
+
+&ahci1 {
+ u-boot,dm-spl;
+};
--
2.20.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH 6/9] ARM: mvebu: add support for boot from SATA
2019-05-16 10:03 ` [U-Boot] [PATCH 6/9] ARM: mvebu: add support for boot from SATA Baruch Siach
@ 2019-05-16 10:11 ` Baruch Siach
0 siblings, 0 replies; 3+ messages in thread
From: Baruch Siach @ 2019-05-16 10:11 UTC (permalink / raw)
To: u-boot
Hi u-boot list, Stefan,
Please ignore this patch and the next. The patch series starts at the
0/9 cover letter.
Sorry for the spam.
baruch
On Thu, May 16 2019, Baruch Siach wrote:
> Add the required Kconfig and macro definitions to allow boot from SATA
> on Armada 38x systems.
>
> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
> ---
> arch/arm/mach-mvebu/Kconfig | 5 +++++
> arch/arm/mach-mvebu/Makefile | 3 +++
> arch/arm/mach-mvebu/include/mach/soc.h | 2 ++
> arch/arm/mach-mvebu/spl.c | 5 +++++
> 4 files changed, 15 insertions(+)
>
> diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
> index 495c48e6c749..fdd39685b75d 100644
> --- a/arch/arm/mach-mvebu/Kconfig
> +++ b/arch/arm/mach-mvebu/Kconfig
> @@ -239,6 +239,11 @@ config MVEBU_SPL_BOOT_DEVICE_MMC
> bool "SDIO/MMC card"
> select SPL_LIBDISK_SUPPORT
>
> +config MVEBU_SPL_BOOT_DEVICE_SATA
> + bool "SATA"
> + select SPL_SATA_SUPPORT
> + select SPL_LIBDISK_SUPPORT
> +
> config MVEBU_SPL_BOOT_DEVICE_UART
> bool "UART"
>
> diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
> index 02d3ce27ee74..8228a17972f9 100644
> --- a/arch/arm/mach-mvebu/Makefile
> +++ b/arch/arm/mach-mvebu/Makefile
> @@ -37,6 +37,9 @@ endif
> ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC),)
> KWB_CFG_BOOT_FROM=sdio
> endif
> +ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_SATA),)
> + KWB_CFG_BOOT_FROM=sata
> +endif
> ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_UART),)
> KWB_CFG_BOOT_FROM=uart
> endif
> diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h
> index f666ee24243b..acb9257c90fe 100644
> --- a/arch/arm/mach-mvebu/include/mach/soc.h
> +++ b/arch/arm/mach-mvebu/include/mach/soc.h
> @@ -159,7 +159,9 @@
> #define BOOT_DEV_SEL_MASK (0x3f << BOOT_DEV_SEL_OFFS)
>
> #define BOOT_FROM_NAND 0x0A
> +#define BOOT_FROM_SATA 0x22
> #define BOOT_FROM_UART 0x28
> +#define BOOT_FROM_SATA_ALT 0x2A
> #define BOOT_FROM_UART_ALT 0x3f
> #define BOOT_FROM_SPI 0x32
> #define BOOT_FROM_MMC 0x30
> diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c
> index 530b98c1aa31..d54de5195624 100644
> --- a/arch/arm/mach-mvebu/spl.c
> +++ b/arch/arm/mach-mvebu/spl.c
> @@ -59,6 +59,11 @@ static u32 get_boot_device(void)
> case BOOT_FROM_UART_ALT:
> #endif
> return BOOT_DEVICE_UART;
> +#ifdef BOOT_FROM_SATA
> + case BOOT_FROM_SATA:
> + case BOOT_FROM_SATA_ALT:
> + return BOOT_DEVICE_SATA;
> +#endif
> case BOOT_FROM_SPI:
> default:
> return BOOT_DEVICE_SPI;
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-05-16 10:11 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <cover.1557997586.git.baruch@tkos.co.il>
2019-05-16 10:03 ` [U-Boot] [PATCH 6/9] ARM: mvebu: add support for boot from SATA Baruch Siach
2019-05-16 10:11 ` Baruch Siach
2019-05-16 10:04 ` [U-Boot] [PATCH 7/9] ARM: dts: clearfog: enable SATA in SPL Baruch Siach
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.