* [PATCH 1/4] ntb_perf: refactor code for CPU and DMA transfers
2020-02-05 17:16 [PATCH 0/4] ntb perf and ntb tool improvements Arindam Nath
@ 2020-02-05 17:16 ` Arindam Nath
2020-02-05 17:16 ` [PATCH 2/4] ntb_perf: send command in response to EAGAIN Arindam Nath
` (2 subsequent siblings)
3 siblings, 0 replies; 7+ messages in thread
From: Arindam Nath @ 2020-02-05 17:16 UTC (permalink / raw)
To: Jon Mason, Dave Jiang, Allen Hubbe, Sanjay R Mehta
Cc: linux-ntb, linux-kernel, Arindam Nath
This patch creates separate function to handle CPU
and DMA transfers. Since CPU transfers use memcopy
and DMA transfers use dmaengine APIs, these changes
not only allow logical separation between the two,
but also allows someone to clearly see the difference
in the way the two are handled.
In the case of DMA, we DMA from system memory to the
memory window(MW) of NTB, which is a MMIO region, we
should not use dma_map_page() for mapping MW. The
correct way to map a MMIO region is to use
dma_map_resource(), so the code is modified
accordingly.
dma_map_resource() expects physical address of the
region to be mapped for DMA, we add a new field,
outbuf_phys_addr, to struct perf_peer, and also
another field, outbuf_dma_addr, to store the
corresponding mapped address returned by the API.
Since the MW is contiguous, rather than mapping
chunk-by-chunk, we map the entire MW before the
actual DMA transfer happens. Then for each chunk,
we simply pass offset into the mapped region and
DMA to that region. Then later, we unmap the MW
during perf_clear_test().
The above means that now we need to have different
function parameters to deal with in the case of
CPU and DMA transfers. In the case of CPU transfers,
we simply need the CPU virtual addresses for memcopy,
but in the case of DMA, we need dma_addr_t, which
will be different from CPU physical address depending
on whether IOMMU is enabled or not. Thus we now
have two separate functions, perf_copy_chunk_cpu(),
and perf_copy_chunk_dma() to take care of above
consideration.
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
---
drivers/ntb/test/ntb_perf.c | 143 ++++++++++++++++++++++++++----------
1 file changed, 105 insertions(+), 38 deletions(-)
diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c
index e9b7c2dfc730..0e9b9efe74a4 100644
--- a/drivers/ntb/test/ntb_perf.c
+++ b/drivers/ntb/test/ntb_perf.c
@@ -149,6 +149,8 @@ struct perf_peer {
u64 outbuf_xlat;
resource_size_t outbuf_size;
void __iomem *outbuf;
+ phys_addr_t outbuf_phys_addr;
+ dma_addr_t outbuf_dma_addr;
/* Inbound MW params */
dma_addr_t inbuf_xlat;
@@ -775,49 +777,41 @@ static void perf_dma_copy_callback(void *data)
wake_up(&pthr->dma_wait);
}
-static int perf_copy_chunk(struct perf_thread *pthr,
- void __iomem *dst, void *src, size_t len)
+static int perf_copy_chunk_cpu(struct perf_thread *pthr,
+ void __iomem *dst, void *src, size_t len)
+{
+ memcpy_toio(dst, src, len);
+
+ return likely(atomic_read(&pthr->perf->tsync) > 0) ? 0 : -EINTR;
+}
+
+static int perf_copy_chunk_dma(struct perf_thread *pthr,
+ dma_addr_t dst, void *src, size_t len)
{
struct dma_async_tx_descriptor *tx;
struct dmaengine_unmap_data *unmap;
struct device *dma_dev;
int try = 0, ret = 0;
- if (!use_dma) {
- memcpy_toio(dst, src, len);
- goto ret_check_tsync;
- }
-
dma_dev = pthr->dma_chan->device->dev;
-
- if (!is_dma_copy_aligned(pthr->dma_chan->device, offset_in_page(src),
- offset_in_page(dst), len))
- return -EIO;
-
- unmap = dmaengine_get_unmap_data(dma_dev, 2, GFP_NOWAIT);
+ unmap = dmaengine_get_unmap_data(dma_dev, 1, GFP_NOWAIT);
if (!unmap)
return -ENOMEM;
unmap->len = len;
unmap->addr[0] = dma_map_page(dma_dev, virt_to_page(src),
- offset_in_page(src), len, DMA_TO_DEVICE);
+ offset_in_page(src), len, DMA_TO_DEVICE);
if (dma_mapping_error(dma_dev, unmap->addr[0])) {
ret = -EIO;
goto err_free_resource;
}
unmap->to_cnt = 1;
- unmap->addr[1] = dma_map_page(dma_dev, virt_to_page(dst),
- offset_in_page(dst), len, DMA_FROM_DEVICE);
- if (dma_mapping_error(dma_dev, unmap->addr[1])) {
- ret = -EIO;
- goto err_free_resource;
- }
- unmap->from_cnt = 1;
-
do {
- tx = dmaengine_prep_dma_memcpy(pthr->dma_chan, unmap->addr[1],
- unmap->addr[0], len, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ tx = dmaengine_prep_dma_memcpy(pthr->dma_chan, dst,
+ unmap->addr[0], len,
+ DMA_PREP_INTERRUPT |
+ DMA_CTRL_ACK);
if (!tx)
msleep(DMA_MDELAY);
} while (!tx && (try++ < DMA_TRIES));
@@ -833,22 +827,16 @@ static int perf_copy_chunk(struct perf_thread *pthr,
ret = dma_submit_error(dmaengine_submit(tx));
if (ret) {
- dmaengine_unmap_put(unmap);
goto err_free_resource;
}
- dmaengine_unmap_put(unmap);
-
atomic_inc(&pthr->dma_sync);
dma_async_issue_pending(pthr->dma_chan);
-ret_check_tsync:
- return likely(atomic_read(&pthr->perf->tsync) > 0) ? 0 : -EINTR;
-
err_free_resource:
dmaengine_unmap_put(unmap);
- return ret;
+ return likely(atomic_read(&pthr->perf->tsync) > 0) ? ret : -EINTR;
}
static bool perf_dma_filter(struct dma_chan *chan, void *data)
@@ -893,7 +881,7 @@ static int perf_init_test(struct perf_thread *pthr)
return 0;
}
-static int perf_run_test(struct perf_thread *pthr)
+static int perf_run_test_cpu(struct perf_thread *pthr)
{
struct perf_peer *peer = pthr->perf->test_peer;
struct perf_ctx *perf = pthr->perf;
@@ -911,10 +899,9 @@ static int perf_run_test(struct perf_thread *pthr)
flt_dst = peer->outbuf;
pthr->duration = ktime_get();
-
/* Copied field is cleared on test launch stage */
while (pthr->copied < total_size) {
- ret = perf_copy_chunk(pthr, flt_dst, flt_src, chunk_size);
+ ret = perf_copy_chunk_cpu(pthr, flt_dst, flt_src, chunk_size);
if (ret) {
dev_err(&perf->ntb->dev, "%d: Got error %d on test\n",
pthr->tidx, ret);
@@ -937,6 +924,74 @@ static int perf_run_test(struct perf_thread *pthr)
return 0;
}
+static int perf_run_test_dma(struct perf_thread *pthr)
+{
+ struct perf_peer *peer = pthr->perf->test_peer;
+ struct perf_ctx *perf = pthr->perf;
+ struct device *dma_dev;
+ dma_addr_t flt_dst, bnd_dst;
+ u64 total_size, chunk_size;
+ void *flt_src;
+ int ret = 0;
+
+ total_size = 1ULL << total_order;
+ chunk_size = 1ULL << chunk_order;
+ chunk_size = min_t(u64, peer->outbuf_size, chunk_size);
+
+ /* Map MW for DMA */
+ dma_dev = pthr->dma_chan->device->dev;
+ peer->outbuf_dma_addr = dma_map_resource(dma_dev,
+ peer->outbuf_phys_addr,
+ peer->outbuf_size,
+ DMA_FROM_DEVICE, 0);
+ if (dma_mapping_error(dma_dev, peer->outbuf_dma_addr)) {
+ dma_unmap_resource(dma_dev, peer->outbuf_dma_addr,
+ peer->outbuf_size, DMA_FROM_DEVICE, 0);
+ return -EIO;
+ }
+
+ flt_src = pthr->src;
+ bnd_dst = peer->outbuf_dma_addr + peer->outbuf_size;
+ flt_dst = peer->outbuf_dma_addr;
+
+ pthr->duration = ktime_get();
+ /* Copied field is cleared on test launch stage */
+ while (pthr->copied < total_size) {
+ ret = perf_copy_chunk_dma(pthr, flt_dst, flt_src, chunk_size);
+ if (ret) {
+ dev_err(&perf->ntb->dev, "%d: Got error %d on test\n",
+ pthr->tidx, ret);
+ return ret;
+ }
+
+ pthr->copied += chunk_size;
+
+ flt_dst += chunk_size;
+ flt_src += chunk_size;
+ if (flt_dst >= bnd_dst || flt_dst < peer->outbuf_dma_addr) {
+ flt_dst = peer->outbuf_dma_addr;
+ flt_src = pthr->src;
+ }
+
+ /* Give up CPU to give a chance for other threads to use it */
+ schedule();
+ }
+
+ return 0;
+}
+
+static int perf_run_test(struct perf_thread *pthr)
+{
+ int ret = 0;
+
+ if (!use_dma)
+ ret = perf_run_test_cpu(pthr);
+ else
+ ret = perf_run_test_dma(pthr);
+
+ return ret;
+}
+
static int perf_sync_test(struct perf_thread *pthr)
{
struct perf_ctx *perf = pthr->perf;
@@ -969,6 +1024,8 @@ static int perf_sync_test(struct perf_thread *pthr)
static void perf_clear_test(struct perf_thread *pthr)
{
struct perf_ctx *perf = pthr->perf;
+ struct perf_peer *peer = pthr->perf->test_peer;
+ struct device *dma_dev;
if (!use_dma)
goto no_dma_notify;
@@ -978,6 +1035,10 @@ static void perf_clear_test(struct perf_thread *pthr)
* We call it anyway just to be sure of the transfers completion.
*/
(void)dmaengine_terminate_sync(pthr->dma_chan);
+ /* Un-map MW */
+ dma_dev = pthr->dma_chan->device->dev;
+ dma_unmap_resource(dma_dev, peer->outbuf_dma_addr, peer->outbuf_size,
+ DMA_FROM_DEVICE, 0);
dma_release_channel(pthr->dma_chan);
@@ -1383,10 +1444,16 @@ static int perf_setup_peer_mw(struct perf_peer *peer)
if (ret)
return ret;
- peer->outbuf = devm_ioremap_wc(&perf->ntb->dev, phys_addr,
- peer->outbuf_size);
- if (!peer->outbuf)
- return -ENOMEM;
+ if (use_dma) {
+ /* For DMA to/from MW */
+ peer->outbuf_phys_addr = phys_addr;
+ } else {
+ /* For CPU read(from)/write(to) MW */
+ peer->outbuf = devm_ioremap_wc(&perf->ntb->dev, phys_addr,
+ peer->outbuf_size);
+ if (!peer->outbuf)
+ return -ENOMEM;
+ }
if (max_mw_size && peer->outbuf_size > max_mw_size) {
peer->outbuf_size = max_mw_size;
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/4] ntb_perf: send command in response to EAGAIN
2020-02-05 17:16 [PATCH 0/4] ntb perf and ntb tool improvements Arindam Nath
2020-02-05 17:16 ` [PATCH 1/4] ntb_perf: refactor code for CPU and DMA transfers Arindam Nath
@ 2020-02-05 17:16 ` Arindam Nath
2020-02-05 17:16 ` [PATCH 3/4] ntb_perf: pass correct struct device to dma_alloc_coherent Arindam Nath
2020-02-05 17:16 ` [PATCH 4/4] ntb_tool: " Arindam Nath
3 siblings, 0 replies; 7+ messages in thread
From: Arindam Nath @ 2020-02-05 17:16 UTC (permalink / raw)
To: Jon Mason, Dave Jiang, Allen Hubbe, Sanjay R Mehta
Cc: linux-ntb, linux-kernel, Arindam Nath
perf_spad_cmd_send() and perf_msg_cmd_send() return
-EAGAIN after trying to send commands for a maximum
of MSG_TRIES re-tries. But currently there is no
handling for this error. These functions are invoked
from perf_service_work() through function pointers,
so rather than simply call these functions is not
enough. We need to make sure to invoke them again in
case of -EAGAIN. Since peer status bits were cleared
before calling these functions, we set the same status
bits before queueing the work again for later invocation.
This way we simply won't go ahead and initialize the
XLAT registers wrongfully in case sending the very first
command itself fails.
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
---
drivers/ntb/test/ntb_perf.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c
index 0e9b9efe74a4..5116655f0211 100644
--- a/drivers/ntb/test/ntb_perf.c
+++ b/drivers/ntb/test/ntb_perf.c
@@ -625,14 +625,24 @@ static void perf_service_work(struct work_struct *work)
{
struct perf_peer *peer = to_peer_service(work);
- if (test_and_clear_bit(PERF_CMD_SSIZE, &peer->sts))
- perf_cmd_send(peer, PERF_CMD_SSIZE, peer->outbuf_size);
+ if (test_and_clear_bit(PERF_CMD_SSIZE, &peer->sts)) {
+ if (perf_cmd_send(peer, PERF_CMD_SSIZE, peer->outbuf_size)
+ == -EAGAIN) {
+ set_bit(PERF_CMD_SSIZE, &peer->sts);
+ (void)queue_work(system_highpri_wq, &peer->service);
+ }
+ }
if (test_and_clear_bit(PERF_CMD_RSIZE, &peer->sts))
perf_setup_inbuf(peer);
- if (test_and_clear_bit(PERF_CMD_SXLAT, &peer->sts))
- perf_cmd_send(peer, PERF_CMD_SXLAT, peer->inbuf_xlat);
+ if (test_and_clear_bit(PERF_CMD_SXLAT, &peer->sts)) {
+ if (perf_cmd_send(peer, PERF_CMD_SXLAT, peer->inbuf_xlat)
+ == -EAGAIN) {
+ set_bit(PERF_CMD_SXLAT, &peer->sts);
+ (void)queue_work(system_highpri_wq, &peer->service);
+ }
+ }
if (test_and_clear_bit(PERF_CMD_RXLAT, &peer->sts))
perf_setup_outbuf(peer);
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 3/4] ntb_perf: pass correct struct device to dma_alloc_coherent
2020-02-05 17:16 [PATCH 0/4] ntb perf and ntb tool improvements Arindam Nath
2020-02-05 17:16 ` [PATCH 1/4] ntb_perf: refactor code for CPU and DMA transfers Arindam Nath
2020-02-05 17:16 ` [PATCH 2/4] ntb_perf: send command in response to EAGAIN Arindam Nath
@ 2020-02-05 17:16 ` Arindam Nath
2020-02-05 18:44 ` Logan Gunthorpe
2020-02-05 17:16 ` [PATCH 4/4] ntb_tool: " Arindam Nath
3 siblings, 1 reply; 7+ messages in thread
From: Arindam Nath @ 2020-02-05 17:16 UTC (permalink / raw)
To: Jon Mason, Dave Jiang, Allen Hubbe, Sanjay R Mehta
Cc: linux-ntb, linux-kernel, Arindam Nath
From: Sanjay R Mehta <sanju.mehta@amd.com>
Currently, ntb->dev is passed to dma_alloc_coherent
and dma_free_coherent calls. The returned dma_addr_t
is the CPU physical address. This works fine as long
as IOMMU is disabled. But when IOMMU is enabled, we
need to make sure that IOVA is returned for dma_addr_t.
So the correct way to achieve this is by changing the
first parameter of dma_alloc_coherent() as ntb->pdev->dev
instead.
Fixes: 5648e56 ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
---
drivers/ntb/test/ntb_perf.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c
index 5116655f0211..65501f24b742 100644
--- a/drivers/ntb/test/ntb_perf.c
+++ b/drivers/ntb/test/ntb_perf.c
@@ -558,7 +558,7 @@ static void perf_free_inbuf(struct perf_peer *peer)
return;
(void)ntb_mw_clear_trans(peer->perf->ntb, peer->pidx, peer->gidx);
- dma_free_coherent(&peer->perf->ntb->dev, peer->inbuf_size,
+ dma_free_coherent(&peer->perf->ntb->pdev->dev, peer->inbuf_size,
peer->inbuf, peer->inbuf_xlat);
peer->inbuf = NULL;
}
@@ -587,8 +587,9 @@ static int perf_setup_inbuf(struct perf_peer *peer)
perf_free_inbuf(peer);
- peer->inbuf = dma_alloc_coherent(&perf->ntb->dev, peer->inbuf_size,
- &peer->inbuf_xlat, GFP_KERNEL);
+ peer->inbuf = dma_alloc_coherent(&perf->ntb->pdev->dev,
+ peer->inbuf_size, &peer->inbuf_xlat,
+ GFP_KERNEL);
if (!peer->inbuf) {
dev_err(&perf->ntb->dev, "Failed to alloc inbuf of %pa\n",
&peer->inbuf_size);
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 4/4] ntb_tool: pass correct struct device to dma_alloc_coherent
2020-02-05 17:16 [PATCH 0/4] ntb perf and ntb tool improvements Arindam Nath
` (2 preceding siblings ...)
2020-02-05 17:16 ` [PATCH 3/4] ntb_perf: pass correct struct device to dma_alloc_coherent Arindam Nath
@ 2020-02-05 17:16 ` Arindam Nath
3 siblings, 0 replies; 7+ messages in thread
From: Arindam Nath @ 2020-02-05 17:16 UTC (permalink / raw)
To: Jon Mason, Dave Jiang, Allen Hubbe, Sanjay R Mehta
Cc: linux-ntb, linux-kernel, Arindam Nath
From: Sanjay R Mehta <sanju.mehta@amd.com>
Currently, ntb->dev is passed to dma_alloc_coherent
and dma_free_coherent calls. The returned dma_addr_t
is the CPU physical address. This works fine as long
as IOMMU is disabled. But when IOMMU is enabled, we
need to make sure that IOVA is returned for dma_addr_t.
So the correct way to achieve this is by changing the
first parameter of dma_alloc_coherent() as ntb->pdev->dev
instead.
Fixes: 5648e56 ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
---
drivers/ntb/test/ntb_tool.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/ntb/test/ntb_tool.c b/drivers/ntb/test/ntb_tool.c
index d592c0ffbd19..025747c1568e 100644
--- a/drivers/ntb/test/ntb_tool.c
+++ b/drivers/ntb/test/ntb_tool.c
@@ -590,7 +590,7 @@ static int tool_setup_mw(struct tool_ctx *tc, int pidx, int widx,
inmw->size = min_t(resource_size_t, req_size, size);
inmw->size = round_up(inmw->size, addr_align);
inmw->size = round_up(inmw->size, size_align);
- inmw->mm_base = dma_alloc_coherent(&tc->ntb->dev, inmw->size,
+ inmw->mm_base = dma_alloc_coherent(&tc->ntb->pdev->dev, inmw->size,
&inmw->dma_base, GFP_KERNEL);
if (!inmw->mm_base)
return -ENOMEM;
@@ -612,7 +612,7 @@ static int tool_setup_mw(struct tool_ctx *tc, int pidx, int widx,
return 0;
err_free_dma:
- dma_free_coherent(&tc->ntb->dev, inmw->size, inmw->mm_base,
+ dma_free_coherent(&tc->ntb->pdev->dev, inmw->size, inmw->mm_base,
inmw->dma_base);
inmw->mm_base = NULL;
inmw->dma_base = 0;
@@ -629,7 +629,7 @@ static void tool_free_mw(struct tool_ctx *tc, int pidx, int widx)
if (inmw->mm_base != NULL) {
ntb_mw_clear_trans(tc->ntb, pidx, widx);
- dma_free_coherent(&tc->ntb->dev, inmw->size,
+ dma_free_coherent(&tc->ntb->pdev->dev, inmw->size,
inmw->mm_base, inmw->dma_base);
}
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread