* [U-Boot] [PATCH 1/8] arm: zynq: Add identification string to Xilinx boards
@ 2018-01-10 15:26 Michal Simek
2018-01-10 15:26 ` [U-Boot] [PATCH 2/8] arm: zynq: Enable debug console for zc770 xm011 Michal Simek
` (6 more replies)
0 siblings, 7 replies; 8+ messages in thread
From: Michal Simek @ 2018-01-10 15:26 UTC (permalink / raw)
To: u-boot
It is good to see this string to make sure that u-boot which runs on the
board is the same which should run there.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
configs/zynq_zc702_defconfig | 1 +
configs/zynq_zc706_defconfig | 1 +
configs/zynq_zc770_xm010_defconfig | 1 +
configs/zynq_zc770_xm011_defconfig | 1 +
configs/zynq_zc770_xm012_defconfig | 1 +
configs/zynq_zc770_xm013_defconfig | 1 +
6 files changed, 6 insertions(+)
diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig
index 0d0efc223dd4..1d097014f0d3 100644
--- a/configs/zynq_zc702_defconfig
+++ b/configs/zynq_zc702_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="zynq_zc70x"
CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
+CONFIG_IDENT_STRING=" Xilinx Zynq ZC702"
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_DEFAULT_DEVICE_TREE="zynq-zc702"
CONFIG_DEBUG_UART=y
diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig
index 4b186c9fffc6..dbcb4de1d8af 100644
--- a/configs/zynq_zc706_defconfig
+++ b/configs/zynq_zc706_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="zynq_zc70x"
CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
+CONFIG_IDENT_STRING=" Xilinx Zynq ZC706"
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_DEFAULT_DEVICE_TREE="zynq-zc706"
CONFIG_DEBUG_UART=y
diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig
index 2b8fb3c9214a..f38ce4f1ce10 100644
--- a/configs/zynq_zc770_xm010_defconfig
+++ b/configs/zynq_zc770_xm010_defconfig
@@ -1,6 +1,7 @@
CONFIG_ARM=y
CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
+CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM010"
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm010"
CONFIG_DEBUG_UART=y
diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig
index 52ad66a38f61..d46238202ed2 100644
--- a/configs/zynq_zc770_xm011_defconfig
+++ b/configs/zynq_zc770_xm011_defconfig
@@ -1,6 +1,7 @@
CONFIG_ARM=y
CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
+CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM011"
CONFIG_SPL_STACK_R_ADDR=0x200000
# CONFIG_SPL_FAT_SUPPORT is not set
CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm011"
diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig
index a8338f5c2d82..38937800497f 100644
--- a/configs/zynq_zc770_xm012_defconfig
+++ b/configs/zynq_zc770_xm012_defconfig
@@ -1,6 +1,7 @@
CONFIG_ARM=y
CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
+CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM012"
CONFIG_SPL_STACK_R_ADDR=0x200000
# CONFIG_SPL_FAT_SUPPORT is not set
CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm012"
diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig
index 01e2cfe04fb2..6e9c957dddb3 100644
--- a/configs/zynq_zc770_xm013_defconfig
+++ b/configs/zynq_zc770_xm013_defconfig
@@ -1,6 +1,7 @@
CONFIG_ARM=y
CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
+CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM013"
CONFIG_SPL_STACK_R_ADDR=0x200000
# CONFIG_SPL_FAT_SUPPORT is not set
CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm013"
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 2/8] arm: zynq: Enable debug console for zc770 xm011
2018-01-10 15:26 [U-Boot] [PATCH 1/8] arm: zynq: Add identification string to Xilinx boards Michal Simek
@ 2018-01-10 15:26 ` Michal Simek
2018-01-10 15:26 ` [U-Boot] [PATCH 3/8] arm: zynq: Disable networking " Michal Simek
` (5 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Michal Simek @ 2018-01-10 15:26 UTC (permalink / raw)
To: u-boot
Wire debug console which is useful for early debugging.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
configs/zynq_zc770_xm011_defconfig | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig
index d46238202ed2..3043c82c9dbe 100644
--- a/configs/zynq_zc770_xm011_defconfig
+++ b/configs/zynq_zc770_xm011_defconfig
@@ -5,6 +5,7 @@ CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM011"
CONFIG_SPL_STACK_R_ADDR=0x200000
# CONFIG_SPL_FAT_SUPPORT is not set
CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm011"
+CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
@@ -35,4 +36,8 @@ CONFIG_FPGA_XILINX=y
CONFIG_NAND=y
CONFIG_NAND_ZYNQ=y
CONFIG_ZYNQ_GEM=y
+CONFIG_DEBUG_UART_ZYNQ=y
+CONFIG_DEBUG_UART_BASE=0xe0001000
+CONFIG_DEBUG_UART_CLOCK=50000000
+CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ZYNQ_SERIAL=y
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 3/8] arm: zynq: Disable networking for zc770 xm011
2018-01-10 15:26 [U-Boot] [PATCH 1/8] arm: zynq: Add identification string to Xilinx boards Michal Simek
2018-01-10 15:26 ` [U-Boot] [PATCH 2/8] arm: zynq: Enable debug console for zc770 xm011 Michal Simek
@ 2018-01-10 15:26 ` Michal Simek
2018-01-10 15:26 ` [U-Boot] [PATCH 4/8] arm: zynq: Enable BLK when needed Michal Simek
` (4 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Michal Simek @ 2018-01-10 15:26 UTC (permalink / raw)
To: u-boot
Ethernet cable is not connected for xm011 that's why disable all
ethernet related configurations.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
configs/zynq_zc770_xm011_defconfig | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig
index 3043c82c9dbe..2f1205aef1ef 100644
--- a/configs/zynq_zc770_xm011_defconfig
+++ b/configs/zynq_zc770_xm011_defconfig
@@ -24,20 +24,18 @@ CONFIG_CMD_FPGA_LOADP=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_NAND_LOCK_UNLOCK=y
# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
+# CONFIG_CMD_NET is not set
+# CONFIG_CMD_NFS is not set
CONFIG_CMD_CACHE=y
-CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_FPGA_XILINX=y
# CONFIG_MMC is not set
CONFIG_NAND=y
CONFIG_NAND_ZYNQ=y
-CONFIG_ZYNQ_GEM=y
CONFIG_DEBUG_UART_ZYNQ=y
CONFIG_DEBUG_UART_BASE=0xe0001000
CONFIG_DEBUG_UART_CLOCK=50000000
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ZYNQ_SERIAL=y
+CONFIG_REGEX=y
+CONFIG_LIB_RAND=y
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 4/8] arm: zynq: Enable BLK when needed
2018-01-10 15:26 [U-Boot] [PATCH 1/8] arm: zynq: Add identification string to Xilinx boards Michal Simek
2018-01-10 15:26 ` [U-Boot] [PATCH 2/8] arm: zynq: Enable debug console for zc770 xm011 Michal Simek
2018-01-10 15:26 ` [U-Boot] [PATCH 3/8] arm: zynq: Disable networking " Michal Simek
@ 2018-01-10 15:26 ` Michal Simek
2018-01-10 15:26 ` [U-Boot] [PATCH 5/8] arm: zynq: Enable DM_ETH and DM_MMC only if subsystem is enabled Michal Simek
` (3 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Michal Simek @ 2018-01-10 15:26 UTC (permalink / raw)
To: u-boot
There is no reason to enable BLK by default for all boards which is just
increasing memory footprint for memory contrained boards like cse.
zc770s are also saving some space.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/Kconfig | 1 -
configs/zynq_cse_qspi_defconfig | 1 -
configs/zynq_zc770_xm011_defconfig | 1 +
configs/zynq_zc770_xm012_defconfig | 1 +
configs/zynq_zc770_xm013_defconfig | 1 +
5 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f2c35e32c649..fdeef4d05d9d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -755,7 +755,6 @@ config ARCH_ZYNQ
select DM_SPI_FLASH
select SPL_SEPARATE_BSS if SPL
select DM_USB if USB
- select BLK
select CLK
select SPL_CLK
select CLK_ZYNQ
diff --git a/configs/zynq_cse_qspi_defconfig b/configs/zynq_cse_qspi_defconfig
index 9659faefbf33..f6241cdf8c73 100644
--- a/configs/zynq_cse_qspi_defconfig
+++ b/configs/zynq_cse_qspi_defconfig
@@ -48,7 +48,6 @@ CONFIG_OF_EMBED=y
# CONFIG_DM_WARN is not set
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_SPL_DM_SEQ_ALIAS=y
-# CONFIG_SPL_BLK is not set
# CONFIG_ZYNQ_GPIO is not set
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig
index 2f1205aef1ef..e350ae04c758 100644
--- a/configs/zynq_zc770_xm011_defconfig
+++ b/configs/zynq_zc770_xm011_defconfig
@@ -28,6 +28,7 @@ CONFIG_CMD_NAND_LOCK_UNLOCK=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_CACHE=y
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_BLK=y
CONFIG_FPGA_XILINX=y
# CONFIG_MMC is not set
CONFIG_NAND=y
diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig
index 38937800497f..2ec53c3ceab7 100644
--- a/configs/zynq_zc770_xm012_defconfig
+++ b/configs/zynq_zc770_xm012_defconfig
@@ -30,6 +30,7 @@ CONFIG_CMD_CACHE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_BLK=y
CONFIG_FPGA_XILINX=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig
index 6e9c957dddb3..08f8adef845d 100644
--- a/configs/zynq_zc770_xm013_defconfig
+++ b/configs/zynq_zc770_xm013_defconfig
@@ -29,6 +29,7 @@ CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_BLK=y
CONFIG_FPGA_XILINX=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 5/8] arm: zynq: Enable DM_ETH and DM_MMC only if subsystem is enabled
2018-01-10 15:26 [U-Boot] [PATCH 1/8] arm: zynq: Add identification string to Xilinx boards Michal Simek
` (2 preceding siblings ...)
2018-01-10 15:26 ` [U-Boot] [PATCH 4/8] arm: zynq: Enable BLK when needed Michal Simek
@ 2018-01-10 15:26 ` Michal Simek
2018-01-10 15:26 ` [U-Boot] [PATCH 6/8] arm: zynq: Enable DM_GPIO when needed Michal Simek
` (2 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Michal Simek @ 2018-01-10 15:26 UTC (permalink / raw)
To: u-boot
Do not enable DM_ETH/MMC if subsystems are not enabled.
This saves memory for memory constrained boards like cse.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fdeef4d05d9d..d5fb5fed5c70 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -746,10 +746,10 @@ config ARCH_ZYNQ
select SPL_BOARD_INIT if SPL
select SPL_OF_CONTROL if SPL
select DM
- select DM_ETH
+ select DM_ETH if NET
select DM_GPIO
select SPL_DM if SPL
- select DM_MMC
+ select DM_MMC if MMC
select DM_SPI
select DM_SERIAL
select DM_SPI_FLASH
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 6/8] arm: zynq: Enable DM_GPIO when needed
2018-01-10 15:26 [U-Boot] [PATCH 1/8] arm: zynq: Add identification string to Xilinx boards Michal Simek
` (3 preceding siblings ...)
2018-01-10 15:26 ` [U-Boot] [PATCH 5/8] arm: zynq: Enable DM_ETH and DM_MMC only if subsystem is enabled Michal Simek
@ 2018-01-10 15:26 ` Michal Simek
2018-01-10 15:26 ` [U-Boot] [PATCH 7/8] arm: zynq: Move bootcommand to defconfig Michal Simek
2018-01-10 15:26 ` [U-Boot] [PATCH 8/8] arm: zynq: Enable distro defaults setting Michal Simek
6 siblings, 0 replies; 8+ messages in thread
From: Michal Simek @ 2018-01-10 15:26 UTC (permalink / raw)
To: u-boot
There are two reasons for doing this change.
There is still !DM driver for xilinx soft gpio IP and especially it is
saving some space for memory constrained boards like cse (almost ~400B).
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/Kconfig | 1 -
configs/syzygy_hub_defconfig | 1 +
configs/topic_miami_defconfig | 1 +
configs/topic_miamilite_defconfig | 1 +
configs/topic_miamiplus_defconfig | 1 +
configs/zynq_cc108_defconfig | 1 +
configs/zynq_cse_qspi_defconfig | 1 -
configs/zynq_microzed_defconfig | 1 +
configs/zynq_picozed_defconfig | 1 +
configs/zynq_z_turn_defconfig | 1 +
configs/zynq_zc702_defconfig | 1 +
configs/zynq_zc706_defconfig | 1 +
configs/zynq_zc770_xm010_defconfig | 1 +
configs/zynq_zc770_xm011_defconfig | 1 +
configs/zynq_zc770_xm012_defconfig | 1 +
configs/zynq_zc770_xm013_defconfig | 1 +
configs/zynq_zed_defconfig | 1 +
configs/zynq_zybo_defconfig | 1 +
18 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d5fb5fed5c70..fa050e22162c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -747,7 +747,6 @@ config ARCH_ZYNQ
select SPL_OF_CONTROL if SPL
select DM
select DM_ETH if NET
- select DM_GPIO
select SPL_DM if SPL
select DM_MMC if MMC
select DM_SPI
diff --git a/configs/syzygy_hub_defconfig b/configs/syzygy_hub_defconfig
index 8bdc4be67d70..17a671b44615 100644
--- a/configs/syzygy_hub_defconfig
+++ b/configs/syzygy_hub_defconfig
@@ -40,6 +40,7 @@ CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_EMBED=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_FPGA_XILINX=y
+CONFIG_DM_GPIO=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_ZYNQ_GEM=y
diff --git a/configs/topic_miami_defconfig b/configs/topic_miami_defconfig
index aabd705da0fb..d2dd1373d8d9 100644
--- a/configs/topic_miami_defconfig
+++ b/configs/topic_miami_defconfig
@@ -32,6 +32,7 @@ CONFIG_OF_EMBED=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_DFU_RAM=y
CONFIG_FPGA_XILINX=y
+CONFIG_DM_GPIO=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
diff --git a/configs/topic_miamilite_defconfig b/configs/topic_miamilite_defconfig
index 7228283b3c6b..fac6e9f54d1d 100644
--- a/configs/topic_miamilite_defconfig
+++ b/configs/topic_miamilite_defconfig
@@ -32,6 +32,7 @@ CONFIG_OF_EMBED=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_DFU_RAM=y
CONFIG_FPGA_XILINX=y
+CONFIG_DM_GPIO=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
diff --git a/configs/topic_miamiplus_defconfig b/configs/topic_miamiplus_defconfig
index d511a942838b..e2d6c935f480 100644
--- a/configs/topic_miamiplus_defconfig
+++ b/configs/topic_miamiplus_defconfig
@@ -30,6 +30,7 @@ CONFIG_OF_EMBED=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_DFU_RAM=y
CONFIG_FPGA_XILINX=y
+CONFIG_DM_GPIO=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
diff --git a/configs/zynq_cc108_defconfig b/configs/zynq_cc108_defconfig
index bdba0d1cc9ba..1b2b34821b7f 100644
--- a/configs/zynq_cc108_defconfig
+++ b/configs/zynq_cc108_defconfig
@@ -33,6 +33,7 @@ CONFIG_CMD_FS_GENERIC=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_FPGA_XILINX=y
+CONFIG_DM_GPIO=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
diff --git a/configs/zynq_cse_qspi_defconfig b/configs/zynq_cse_qspi_defconfig
index f6241cdf8c73..d4baeaa0c548 100644
--- a/configs/zynq_cse_qspi_defconfig
+++ b/configs/zynq_cse_qspi_defconfig
@@ -48,7 +48,6 @@ CONFIG_OF_EMBED=y
# CONFIG_DM_WARN is not set
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_SPL_DM_SEQ_ALIAS=y
-# CONFIG_ZYNQ_GPIO is not set
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig
index fc21eb8f67a3..2ea885e67e22 100644
--- a/configs/zynq_microzed_defconfig
+++ b/configs/zynq_microzed_defconfig
@@ -40,6 +40,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_FPGA_XILINX=y
+CONFIG_DM_GPIO=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig
index f36e7bd849f4..c39b2cb7af3b 100644
--- a/configs/zynq_picozed_defconfig
+++ b/configs/zynq_picozed_defconfig
@@ -35,6 +35,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_FPGA_XILINX=y
+CONFIG_DM_GPIO=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_ZYNQ_GEM=y
diff --git a/configs/zynq_z_turn_defconfig b/configs/zynq_z_turn_defconfig
index c727b2acbf28..b5a81d5e19f4 100644
--- a/configs/zynq_z_turn_defconfig
+++ b/configs/zynq_z_turn_defconfig
@@ -36,6 +36,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_FPGA_XILINX=y
+CONFIG_DM_GPIO=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig
index 1d097014f0d3..2c38f006fcd2 100644
--- a/configs/zynq_zc702_defconfig
+++ b/configs/zynq_zc702_defconfig
@@ -46,6 +46,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_FPGA_XILINX=y
+CONFIG_DM_GPIO=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig
index dbcb4de1d8af..b5777ec0e8f5 100644
--- a/configs/zynq_zc706_defconfig
+++ b/configs/zynq_zc706_defconfig
@@ -46,6 +46,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_FPGA_XILINX=y
+CONFIG_DM_GPIO=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig
index f38ce4f1ce10..8fa66710ac1e 100644
--- a/configs/zynq_zc770_xm010_defconfig
+++ b/configs/zynq_zc770_xm010_defconfig
@@ -38,6 +38,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_FPGA_XILINX=y
+CONFIG_DM_GPIO=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig
index e350ae04c758..c9b289529579 100644
--- a/configs/zynq_zc770_xm011_defconfig
+++ b/configs/zynq_zc770_xm011_defconfig
@@ -30,6 +30,7 @@ CONFIG_CMD_CACHE=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_BLK=y
CONFIG_FPGA_XILINX=y
+CONFIG_DM_GPIO=y
# CONFIG_MMC is not set
CONFIG_NAND=y
CONFIG_NAND_ZYNQ=y
diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig
index 2ec53c3ceab7..1b21b1783f88 100644
--- a/configs/zynq_zc770_xm012_defconfig
+++ b/configs/zynq_zc770_xm012_defconfig
@@ -32,6 +32,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_BLK=y
CONFIG_FPGA_XILINX=y
+CONFIG_DM_GPIO=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_ZYNQ_GEM=y
diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig
index 08f8adef845d..e9c86cbb6e70 100644
--- a/configs/zynq_zc770_xm013_defconfig
+++ b/configs/zynq_zc770_xm013_defconfig
@@ -31,6 +31,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_BLK=y
CONFIG_FPGA_XILINX=y
+CONFIG_DM_GPIO=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig
index c18f056debc4..7de42238289c 100644
--- a/configs/zynq_zed_defconfig
+++ b/configs/zynq_zed_defconfig
@@ -41,6 +41,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_FPGA_XILINX=y
+CONFIG_DM_GPIO=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig
index 21f8c08fd824..a25a750718f1 100644
--- a/configs/zynq_zybo_defconfig
+++ b/configs/zynq_zybo_defconfig
@@ -44,6 +44,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_FPGA_XILINX=y
+CONFIG_DM_GPIO=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 7/8] arm: zynq: Move bootcommand to defconfig
2018-01-10 15:26 [U-Boot] [PATCH 1/8] arm: zynq: Add identification string to Xilinx boards Michal Simek
` (4 preceding siblings ...)
2018-01-10 15:26 ` [U-Boot] [PATCH 6/8] arm: zynq: Enable DM_GPIO when needed Michal Simek
@ 2018-01-10 15:26 ` Michal Simek
2018-01-10 15:26 ` [U-Boot] [PATCH 8/8] arm: zynq: Enable distro defaults setting Michal Simek
6 siblings, 0 replies; 8+ messages in thread
From: Michal Simek @ 2018-01-10 15:26 UTC (permalink / raw)
To: u-boot
It will cleanup generic config and enable option to change it for every
board.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
Alex: Feel free to remove that run $modeboot for z_turn.
---
configs/syzygy_hub_defconfig | 2 ++
configs/topic_miami_defconfig | 2 ++
configs/topic_miamilite_defconfig | 2 ++
configs/topic_miamiplus_defconfig | 2 ++
configs/zynq_cc108_defconfig | 2 ++
configs/zynq_microzed_defconfig | 2 ++
configs/zynq_picozed_defconfig | 2 ++
configs/zynq_z_turn_defconfig | 2 ++
configs/zynq_zc702_defconfig | 2 ++
configs/zynq_zc706_defconfig | 2 ++
configs/zynq_zc770_xm010_defconfig | 2 ++
configs/zynq_zc770_xm011_defconfig | 2 ++
configs/zynq_zc770_xm012_defconfig | 2 ++
configs/zynq_zc770_xm013_defconfig | 2 ++
configs/zynq_zed_defconfig | 2 ++
configs/zynq_zybo_defconfig | 2 ++
include/configs/zynq-common.h | 1 -
include/configs/zynq_cse.h | 1 -
18 files changed, 32 insertions(+), 2 deletions(-)
diff --git a/configs/syzygy_hub_defconfig b/configs/syzygy_hub_defconfig
index 17a671b44615..117476f64c72 100644
--- a/configs/syzygy_hub_defconfig
+++ b/configs/syzygy_hub_defconfig
@@ -9,6 +9,8 @@ CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/topic_miami_defconfig b/configs/topic_miami_defconfig
index d2dd1373d8d9..cf2f513e94d1 100644
--- a/configs/topic_miami_defconfig
+++ b/configs/topic_miami_defconfig
@@ -8,6 +8,8 @@ CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miami/ps7_regs.txt"
CONFIG_DEFAULT_DEVICE_TREE="zynq-topic-miami"
CONFIG_DEBUG_UART=y
CONFIG_BOOTDELAY=0
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/topic_miamilite_defconfig b/configs/topic_miamilite_defconfig
index fac6e9f54d1d..cfdaff1340d2 100644
--- a/configs/topic_miamilite_defconfig
+++ b/configs/topic_miamilite_defconfig
@@ -8,6 +8,8 @@ CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miamilite/ps7_regs.txt"
CONFIG_DEFAULT_DEVICE_TREE="zynq-topic-miamilite"
CONFIG_DEBUG_UART=y
CONFIG_BOOTDELAY=0
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/topic_miamiplus_defconfig b/configs/topic_miamiplus_defconfig
index e2d6c935f480..223dc2efef5c 100644
--- a/configs/topic_miamiplus_defconfig
+++ b/configs/topic_miamiplus_defconfig
@@ -8,6 +8,8 @@ CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miamiplus/ps7_regs.txt"
CONFIG_DEFAULT_DEVICE_TREE="zynq-topic-miamiplus"
CONFIG_DEBUG_UART=y
CONFIG_BOOTDELAY=0
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/zynq_cc108_defconfig b/configs/zynq_cc108_defconfig
index 1b2b34821b7f..83560f2630b4 100644
--- a/configs/zynq_cc108_defconfig
+++ b/configs/zynq_cc108_defconfig
@@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig
index 2ea885e67e22..232b285c10f6 100644
--- a/configs/zynq_microzed_defconfig
+++ b/configs/zynq_microzed_defconfig
@@ -6,6 +6,8 @@ CONFIG_DEFAULT_DEVICE_TREE="zynq-microzed"
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig
index c39b2cb7af3b..7e4dfdf7cef8 100644
--- a/configs/zynq_picozed_defconfig
+++ b/configs/zynq_picozed_defconfig
@@ -3,6 +3,8 @@ CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_DEFAULT_DEVICE_TREE="zynq-picozed"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/zynq_z_turn_defconfig b/configs/zynq_z_turn_defconfig
index b5a81d5e19f4..7376d1febb32 100644
--- a/configs/zynq_z_turn_defconfig
+++ b/configs/zynq_z_turn_defconfig
@@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig
index 2c38f006fcd2..f92bba6f39c6 100644
--- a/configs/zynq_zc702_defconfig
+++ b/configs/zynq_zc702_defconfig
@@ -9,6 +9,8 @@ CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig
index b5777ec0e8f5..7d9d0151a149 100644
--- a/configs/zynq_zc706_defconfig
+++ b/configs/zynq_zc706_defconfig
@@ -9,6 +9,8 @@ CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig
index 8fa66710ac1e..8360bbbc2362 100644
--- a/configs/zynq_zc770_xm010_defconfig
+++ b/configs/zynq_zc770_xm010_defconfig
@@ -8,6 +8,8 @@ CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig
index c9b289529579..80fb3d9c0ddd 100644
--- a/configs/zynq_zc770_xm011_defconfig
+++ b/configs/zynq_zc770_xm011_defconfig
@@ -9,6 +9,8 @@ CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig
index 1b21b1783f88..205d2c5f7bac 100644
--- a/configs/zynq_zc770_xm012_defconfig
+++ b/configs/zynq_zc770_xm012_defconfig
@@ -8,6 +8,8 @@ CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm012"
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig
index e9c86cbb6e70..856470d4d188 100644
--- a/configs/zynq_zc770_xm013_defconfig
+++ b/configs/zynq_zc770_xm013_defconfig
@@ -8,6 +8,8 @@ CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm013"
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig
index 7de42238289c..58ba75b7c7ca 100644
--- a/configs/zynq_zed_defconfig
+++ b/configs/zynq_zed_defconfig
@@ -6,6 +6,8 @@ CONFIG_DEFAULT_DEVICE_TREE="zynq-zed"
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig
index a25a750718f1..1dc2924ae3dd 100644
--- a/configs/zynq_zybo_defconfig
+++ b/configs/zynq_zybo_defconfig
@@ -8,6 +8,8 @@ CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index b10cb3f57220..f24aeda5c9fc 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -164,7 +164,6 @@
#define CONFIG_PREBOOT
/* Boot configuration */
-#define CONFIG_BOOTCOMMAND "run $modeboot || run distro_bootcmd"
#define CONFIG_SYS_LOAD_ADDR 0 /* default? */
/* Distro boot enablement */
diff --git a/include/configs/zynq_cse.h b/include/configs/zynq_cse.h
index dd65b5234380..f0f19a67bf34 100644
--- a/include/configs/zynq_cse.h
+++ b/include/configs/zynq_cse.h
@@ -19,7 +19,6 @@
/* Undef unneeded configs */
#undef CONFIG_EXTRA_ENV_SETTINGS
#undef CONFIG_BOARD_LATE_INIT
-#undef CONFIG_BOOTCOMMAND
#undef CONFIG_ENV_SIZE
#undef CONFIG_CMDLINE_EDITING
#undef CONFIG_AUTO_COMPLETE
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 8/8] arm: zynq: Enable distro defaults setting
2018-01-10 15:26 [U-Boot] [PATCH 1/8] arm: zynq: Add identification string to Xilinx boards Michal Simek
` (5 preceding siblings ...)
2018-01-10 15:26 ` [U-Boot] [PATCH 7/8] arm: zynq: Move bootcommand to defconfig Michal Simek
@ 2018-01-10 15:26 ` Michal Simek
6 siblings, 0 replies; 8+ messages in thread
From: Michal Simek @ 2018-01-10 15:26 UTC (permalink / raw)
To: u-boot
BOOTCOMMAND is composed with distro_bootcmd but this variable is not
present. Enabling distro defaults setting is fixing it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
configs/syzygy_hub_defconfig | 11 +----------
configs/topic_miami_defconfig | 6 +-----
configs/topic_miamilite_defconfig | 6 +-----
configs/topic_miamiplus_defconfig | 6 +-----
configs/zynq_cc108_defconfig | 11 +----------
configs/zynq_microzed_defconfig | 10 +---------
configs/zynq_picozed_defconfig | 10 +---------
configs/zynq_z_turn_defconfig | 10 +---------
configs/zynq_zc702_defconfig | 11 +----------
configs/zynq_zc706_defconfig | 11 +----------
configs/zynq_zc770_xm010_defconfig | 11 +----------
configs/zynq_zed_defconfig | 11 +----------
configs/zynq_zybo_defconfig | 10 +---------
13 files changed, 13 insertions(+), 111 deletions(-)
diff --git a/configs/syzygy_hub_defconfig b/configs/syzygy_hub_defconfig
index 117476f64c72..f4ae8e0f25eb 100644
--- a/configs/syzygy_hub_defconfig
+++ b/configs/syzygy_hub_defconfig
@@ -6,18 +6,16 @@ CONFIG_SYS_TEXT_BASE=0x4000000
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_DEFAULT_DEVICE_TREE="zynq-syzygy-hub"
CONFIG_DEBUG_UART=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
-CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
-CONFIG_CMD_BOOTZ=y
CONFIG_CMD_EEPROM=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_FPGA_LOADBP=y
@@ -30,15 +28,8 @@ CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_EMBED=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_FPGA_XILINX=y
diff --git a/configs/topic_miami_defconfig b/configs/topic_miami_defconfig
index cf2f513e94d1..1e1a3ddb4917 100644
--- a/configs/topic_miami_defconfig
+++ b/configs/topic_miami_defconfig
@@ -7,13 +7,12 @@ CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miami/ps7_regs.txt"
CONFIG_DEFAULT_DEVICE_TREE="zynq-topic-miami"
CONFIG_DEBUG_UART=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTDELAY=0
-CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="zynq-uboot> "
CONFIG_CMD_THOR_DOWNLOAD=y
CONFIG_CMD_DFU=y
@@ -27,9 +26,6 @@ CONFIG_CMD_USB=y
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_EMBED=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_DFU_RAM=y
diff --git a/configs/topic_miamilite_defconfig b/configs/topic_miamilite_defconfig
index cfdaff1340d2..1e51bc5c873f 100644
--- a/configs/topic_miamilite_defconfig
+++ b/configs/topic_miamilite_defconfig
@@ -7,13 +7,12 @@ CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miamilite/ps7_regs.txt"
CONFIG_DEFAULT_DEVICE_TREE="zynq-topic-miamilite"
CONFIG_DEBUG_UART=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTDELAY=0
-CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="zynq-uboot> "
CONFIG_CMD_THOR_DOWNLOAD=y
CONFIG_CMD_DFU=y
@@ -27,9 +26,6 @@ CONFIG_CMD_USB=y
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_EMBED=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_DFU_RAM=y
diff --git a/configs/topic_miamiplus_defconfig b/configs/topic_miamiplus_defconfig
index 223dc2efef5c..7dd07c7e48b0 100644
--- a/configs/topic_miamiplus_defconfig
+++ b/configs/topic_miamiplus_defconfig
@@ -7,13 +7,12 @@ CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miamiplus/ps7_regs.txt"
CONFIG_DEFAULT_DEVICE_TREE="zynq-topic-miamiplus"
CONFIG_DEBUG_UART=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTDELAY=0
-CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="zynq-uboot> "
CONFIG_CMD_THOR_DOWNLOAD=y
CONFIG_CMD_DFU=y
@@ -25,9 +24,6 @@ CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_EMBED=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_DFU_RAM=y
diff --git a/configs/zynq_cc108_defconfig b/configs/zynq_cc108_defconfig
index 83560f2630b4..02445ac4ab7d 100644
--- a/configs/zynq_cc108_defconfig
+++ b/configs/zynq_cc108_defconfig
@@ -4,17 +4,15 @@ CONFIG_SYS_TEXT_BASE=0x4000000
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_DEFAULT_DEVICE_TREE="zynq-cc108"
CONFIG_DEBUG_UART=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
-CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
-CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
-CONFIG_CMD_BOOTZ=y
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
@@ -23,15 +21,8 @@ CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_FPGA_XILINX=y
diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig
index 232b285c10f6..c9829ade0209 100644
--- a/configs/zynq_microzed_defconfig
+++ b/configs/zynq_microzed_defconfig
@@ -3,16 +3,15 @@ CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_DEFAULT_DEVICE_TREE="zynq-microzed"
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
-CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
CONFIG_CMD_THOR_DOWNLOAD=y
CONFIG_CMD_DFU=y
@@ -27,15 +26,8 @@ CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig
index 7e4dfdf7cef8..40befdaf8d43 100644
--- a/configs/zynq_picozed_defconfig
+++ b/configs/zynq_picozed_defconfig
@@ -3,13 +3,12 @@ CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_DEFAULT_DEVICE_TREE="zynq-picozed"
-CONFIG_USE_BOOTCOMMAND=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
CONFIG_CMD_THOR_DOWNLOAD=y
CONFIG_CMD_DFU=y
@@ -23,15 +22,8 @@ CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_DFU_MMC=y
diff --git a/configs/zynq_z_turn_defconfig b/configs/zynq_z_turn_defconfig
index 7376d1febb32..dd12f7c8155b 100644
--- a/configs/zynq_z_turn_defconfig
+++ b/configs/zynq_z_turn_defconfig
@@ -4,16 +4,15 @@ CONFIG_SYS_TEXT_BASE=0x4000000
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_DEFAULT_DEVICE_TREE="zynq-zturn-myir"
CONFIG_DEBUG_UART=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
-CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
CONFIG_CMD_THOR_DOWNLOAD=y
CONFIG_CMD_DFU=y
@@ -24,15 +23,8 @@ CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_DFU_MMC=y
diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig
index f92bba6f39c6..09584db67cea 100644
--- a/configs/zynq_zc702_defconfig
+++ b/configs/zynq_zc702_defconfig
@@ -6,18 +6,16 @@ CONFIG_IDENT_STRING=" Xilinx Zynq ZC702"
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_DEFAULT_DEVICE_TREE="zynq-zc702"
CONFIG_DEBUG_UART=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
-CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
-CONFIG_CMD_BOOTZ=y
CONFIG_CMD_THOR_DOWNLOAD=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_DFU=y
@@ -33,15 +31,8 @@ CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig
index 7d9d0151a149..e9f701dce7fa 100644
--- a/configs/zynq_zc706_defconfig
+++ b/configs/zynq_zc706_defconfig
@@ -6,18 +6,16 @@ CONFIG_IDENT_STRING=" Xilinx Zynq ZC706"
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_DEFAULT_DEVICE_TREE="zynq-zc706"
CONFIG_DEBUG_UART=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
-CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
-CONFIG_CMD_BOOTZ=y
CONFIG_CMD_THOR_DOWNLOAD=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_DFU=y
@@ -33,15 +31,8 @@ CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig
index 8360bbbc2362..0503715768df 100644
--- a/configs/zynq_zc770_xm010_defconfig
+++ b/configs/zynq_zc770_xm010_defconfig
@@ -5,18 +5,16 @@ CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM010"
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm010"
CONFIG_DEBUG_UART=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
-CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
-CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_FPGA_LOADBP=y
CONFIG_CMD_FPGA_LOADFS=y
@@ -27,15 +25,8 @@ CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig
index 58ba75b7c7ca..da93c9688faa 100644
--- a/configs/zynq_zed_defconfig
+++ b/configs/zynq_zed_defconfig
@@ -3,18 +3,16 @@ CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_DEFAULT_DEVICE_TREE="zynq-zed"
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
-CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
-CONFIG_CMD_BOOTZ=y
CONFIG_CMD_THOR_DOWNLOAD=y
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set
@@ -28,15 +26,8 @@ CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig
index 1dc2924ae3dd..ba5c50393fc0 100644
--- a/configs/zynq_zybo_defconfig
+++ b/configs/zynq_zybo_defconfig
@@ -5,16 +5,15 @@ CONFIG_SYS_TEXT_BASE=0x4000000
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_DEFAULT_DEVICE_TREE="zynq-zybo"
CONFIG_DEBUG_UART=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
-CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_OS_BOOT=y
-CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Zynq> "
CONFIG_CMD_THOR_DOWNLOAD=y
CONFIG_CMD_EEPROM=y
@@ -31,15 +30,8 @@ CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
end of thread, other threads:[~2018-01-10 15:26 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-01-10 15:26 [U-Boot] [PATCH 1/8] arm: zynq: Add identification string to Xilinx boards Michal Simek
2018-01-10 15:26 ` [U-Boot] [PATCH 2/8] arm: zynq: Enable debug console for zc770 xm011 Michal Simek
2018-01-10 15:26 ` [U-Boot] [PATCH 3/8] arm: zynq: Disable networking " Michal Simek
2018-01-10 15:26 ` [U-Boot] [PATCH 4/8] arm: zynq: Enable BLK when needed Michal Simek
2018-01-10 15:26 ` [U-Boot] [PATCH 5/8] arm: zynq: Enable DM_ETH and DM_MMC only if subsystem is enabled Michal Simek
2018-01-10 15:26 ` [U-Boot] [PATCH 6/8] arm: zynq: Enable DM_GPIO when needed Michal Simek
2018-01-10 15:26 ` [U-Boot] [PATCH 7/8] arm: zynq: Move bootcommand to defconfig Michal Simek
2018-01-10 15:26 ` [U-Boot] [PATCH 8/8] arm: zynq: Enable distro defaults setting Michal Simek
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.