* [Buildroot] [PATCH v3] configs/friendlyarm_nanopi_r2s: new defconfig
@ 2022-01-30 10:11 Gilles Talis
2022-02-03 23:40 ` Giulio Benetti
2022-02-12 13:46 ` Arnout Vandecappelle
0 siblings, 2 replies; 4+ messages in thread
From: Gilles Talis @ 2022-01-30 10:11 UTC (permalink / raw)
To: buildroot; +Cc: Gilles Talis
The NanoPi R2S is a FriendlyElec mini-router based on:
- Rockchip RK3328 SoC
- 1GB (or 2GB) DDR4 RAM
- Gigabit Ethernet (WAN)
- Gigabit Ethernet (USB3) (LAN)
- USB 2.0 Host Port
- MicroSD slot
- Reset button
- WAN - LAN - SYS LED
https://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=282
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
---
Changes v1 -> v2:
- Drop VFAT partition (kernel, DTB and ext4linux.conf in ext4 partition)
Changes v2 -> v3:
- Use fixed versions of u-boot, kernel and TF-A
---
DEVELOPERS | 2 +
board/friendlyarm/nanopi-r2s/extlinux.conf | 4 ++
board/friendlyarm/nanopi-r2s/genimage.cfg | 22 +++++++++
board/friendlyarm/nanopi-r2s/post-build.sh | 5 ++
board/friendlyarm/nanopi-r2s/readme.txt | 57 ++++++++++++++++++++++
configs/friendlyarm_nanopi_r2s_defconfig | 41 ++++++++++++++++
6 files changed, 131 insertions(+)
create mode 100644 board/friendlyarm/nanopi-r2s/extlinux.conf
create mode 100644 board/friendlyarm/nanopi-r2s/genimage.cfg
create mode 100755 board/friendlyarm/nanopi-r2s/post-build.sh
create mode 100644 board/friendlyarm/nanopi-r2s/readme.txt
create mode 100644 configs/friendlyarm_nanopi_r2s_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index fe8de1916e..f8a062558c 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1073,7 +1073,9 @@ F: configs/qemu_*
N: Gilles Talis <gilles.talis@gmail.com>
F: board/freescale/imx8mmevk/
+F: board/friendlyarm/nanopi-r2s/
F: configs/freescale_imx8mmevk_defconfig
+F: configs/friendlyarm_nanopi_r2s_defconfig
F: package/cctz/
F: package/faad2/
F: package/fdk-aac/
diff --git a/board/friendlyarm/nanopi-r2s/extlinux.conf b/board/friendlyarm/nanopi-r2s/extlinux.conf
new file mode 100644
index 0000000000..1ea0cdd8a5
--- /dev/null
+++ b/board/friendlyarm/nanopi-r2s/extlinux.conf
@@ -0,0 +1,4 @@
+label NanoPi R2S linux
+ kernel /boot/Image
+ devicetree /boot/rk3328-nanopi-r2s.dtb
+ append root=/dev/mmcblk0p1 rw rootwait
diff --git a/board/friendlyarm/nanopi-r2s/genimage.cfg b/board/friendlyarm/nanopi-r2s/genimage.cfg
new file mode 100644
index 0000000000..a686b4f14e
--- /dev/null
+++ b/board/friendlyarm/nanopi-r2s/genimage.cfg
@@ -0,0 +1,22 @@
+image sdcard.img {
+ hdimage {
+ }
+
+ partition u-boot-tpl-spl-dtb {
+ in-partition-table = "no"
+ image = "idbloader.img"
+ offset = 32K
+ }
+
+ partition u-boot-dtb {
+ in-partition-table = "no"
+ image = "u-boot.itb"
+ offset = 8M
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ offset = 16M
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/friendlyarm/nanopi-r2s/post-build.sh b/board/friendlyarm/nanopi-r2s/post-build.sh
new file mode 100755
index 0000000000..1f5ff6a611
--- /dev/null
+++ b/board/friendlyarm/nanopi-r2s/post-build.sh
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
diff --git a/board/friendlyarm/nanopi-r2s/readme.txt b/board/friendlyarm/nanopi-r2s/readme.txt
new file mode 100644
index 0000000000..6d291cdd60
--- /dev/null
+++ b/board/friendlyarm/nanopi-r2s/readme.txt
@@ -0,0 +1,57 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Nanopi R2S. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+Nanopi R2S link:
+https://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=282
+
+This configuration uses ATF, U-Boot mainline and kernel mainline.
+
+How to build
+============
+
+ $ make friendlyarm_nanopi_r2s_defconfig
+ $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+Files created in output directory
+=================================
+
+output/images
+
+├── bl31.elf
+├── boot.vfat
+├── extlinux
+├── idbloader.img
+├── Image
+├── rk3328-nanopi-r2s.dtb
+├── rootfs.ext2
+├── rootfs.ext4 -> rootfs.ext2
+├── rootfs.tar
+├── sdcard.img
+├── u-boot.bin
+└── u-boot.itb
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+ $ sudo sync
+
+Insert the micro SDcard in your Nanopi R2S and power it up. The console
+is on the serial line, 1500000 8N1.
+
+Notes
+=====
+
+This configuration can also be used to drive the Friendlyarm Nanopi Neo3 board.
diff --git a/configs/friendlyarm_nanopi_r2s_defconfig b/configs/friendlyarm_nanopi_r2s_defconfig
new file mode 100644
index 0000000000..6fcfcd7159
--- /dev/null
+++ b/configs/friendlyarm_nanopi_r2s_defconfig
@@ -0,0 +1,41 @@
+BR2_aarch64=y
+BR2_ARM_FPU_VFPV4=y
+BR2_TARGET_GENERIC_HOSTNAME="rk3328-nanopi-r2s"
+BR2_TARGET_GENERIC_ISSUE="Welcome to Nanopi R2S RK3328"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-r2s/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-r2s/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.16"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3328-nanopi-r2s"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3328"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES=""
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.10"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-r2s-rk3328"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
--
2.32.0
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [Buildroot] [PATCH v3] configs/friendlyarm_nanopi_r2s: new defconfig
2022-01-30 10:11 [Buildroot] [PATCH v3] configs/friendlyarm_nanopi_r2s: new defconfig Gilles Talis
@ 2022-02-03 23:40 ` Giulio Benetti
2022-02-04 0:31 ` Giulio Benetti
2022-02-12 13:46 ` Arnout Vandecappelle
1 sibling, 1 reply; 4+ messages in thread
From: Giulio Benetti @ 2022-02-03 23:40 UTC (permalink / raw)
To: Gilles Talis, buildroot
Hi Giles,
On 30/01/22 11:11, Gilles Talis wrote:
> The NanoPi R2S is a FriendlyElec mini-router based on:
>
> - Rockchip RK3328 SoC
> - 1GB (or 2GB) DDR4 RAM
> - Gigabit Ethernet (WAN)
> - Gigabit Ethernet (USB3) (LAN)
> - USB 2.0 Host Port
> - MicroSD slot
> - Reset button
> - WAN - LAN - SYS LED
>
> https://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=282
>
> Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
> ---
> Changes v1 -> v2:
> - Drop VFAT partition (kernel, DTB and ext4linux.conf in ext4 partition)
>
> Changes v2 -> v3:
> - Use fixed versions of u-boot, kernel and TF-A
> ---
> DEVELOPERS | 2 +
> board/friendlyarm/nanopi-r2s/extlinux.conf | 4 ++
> board/friendlyarm/nanopi-r2s/genimage.cfg | 22 +++++++++
> board/friendlyarm/nanopi-r2s/post-build.sh | 5 ++
> board/friendlyarm/nanopi-r2s/readme.txt | 57 ++++++++++++++++++++++
> configs/friendlyarm_nanopi_r2s_defconfig | 41 ++++++++++++++++
> 6 files changed, 131 insertions(+)
> create mode 100644 board/friendlyarm/nanopi-r2s/extlinux.conf
> create mode 100644 board/friendlyarm/nanopi-r2s/genimage.cfg
> create mode 100755 board/friendlyarm/nanopi-r2s/post-build.sh
> create mode 100644 board/friendlyarm/nanopi-r2s/readme.txt
> create mode 100644 configs/friendlyarm_nanopi_r2s_defconfig
>
> diff --git a/DEVELOPERS b/DEVELOPERS
> index fe8de1916e..f8a062558c 100644
> --- a/DEVELOPERS
> +++ b/DEVELOPERS
> @@ -1073,7 +1073,9 @@ F: configs/qemu_*
>
> N: Gilles Talis <gilles.talis@gmail.com>
> F: board/freescale/imx8mmevk/
> +F: board/friendlyarm/nanopi-r2s/
> F: configs/freescale_imx8mmevk_defconfig
> +F: configs/friendlyarm_nanopi_r2s_defconfig
> F: package/cctz/
> F: package/faad2/
> F: package/fdk-aac/
> diff --git a/board/friendlyarm/nanopi-r2s/extlinux.conf b/board/friendlyarm/nanopi-r2s/extlinux.conf
> new file mode 100644
> index 0000000000..1ea0cdd8a5
> --- /dev/null
> +++ b/board/friendlyarm/nanopi-r2s/extlinux.conf
> @@ -0,0 +1,4 @@
> +label NanoPi R2S linux
> + kernel /boot/Image
> + devicetree /boot/rk3328-nanopi-r2s.dtb
> + append root=/dev/mmcblk0p1 rw rootwait
> diff --git a/board/friendlyarm/nanopi-r2s/genimage.cfg b/board/friendlyarm/nanopi-r2s/genimage.cfg
> new file mode 100644
> index 0000000000..a686b4f14e
> --- /dev/null
> +++ b/board/friendlyarm/nanopi-r2s/genimage.cfg
> @@ -0,0 +1,22 @@
> +image sdcard.img {
> + hdimage {
> + }
> +
> + partition u-boot-tpl-spl-dtb {
> + in-partition-table = "no"
> + image = "idbloader.img"
> + offset = 32K
> + }
> +
> + partition u-boot-dtb {
> + in-partition-table = "no"
> + image = "u-boot.itb"
> + offset = 8M
> + }
> +
> + partition rootfs {
> + partition-type = 0x83
This ^^^ will fail due to latest genimage version. You can't specify
partition-type anymore but you have to specify:
partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
That means "Root partition (64-bit ARM/AArch64)", check this out:
https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs
> + offset = 16M
> + image = "rootfs.ext4"
> + }
> +}
> diff --git a/board/friendlyarm/nanopi-r2s/post-build.sh b/board/friendlyarm/nanopi-r2s/post-build.sh
> new file mode 100755
> index 0000000000..1f5ff6a611
> --- /dev/null
> +++ b/board/friendlyarm/nanopi-r2s/post-build.sh
> @@ -0,0 +1,5 @@
> +#!/bin/sh
> +
> +BOARD_DIR="$(dirname $0)"
> +
> +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
> diff --git a/board/friendlyarm/nanopi-r2s/readme.txt b/board/friendlyarm/nanopi-r2s/readme.txt
> new file mode 100644
> index 0000000000..6d291cdd60
> --- /dev/null
> +++ b/board/friendlyarm/nanopi-r2s/readme.txt
> @@ -0,0 +1,57 @@
> +Intro
> +=====
> +
> +This default configuration will allow you to start experimenting with the
> +buildroot environment for the Nanopi R2S. With the current configuration
> +it will bring-up the board, and allow access through the serial console.
> +
> +Nanopi R2S link:
> +https://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=282
> +
> +This configuration uses ATF, U-Boot mainline and kernel mainline.
> +
> +How to build
> +============
> +
> + $ make friendlyarm_nanopi_r2s_defconfig
> + $ make
> +
> +Note: you will need access to the internet to download the required
> +sources.
> +
> +Files created in output directory
> +=================================
> +
> +output/images
> +
> +├── bl31.elf
> +├── boot.vfat
> +├── extlinux
> +├── idbloader.img
> +├── Image
> +├── rk3328-nanopi-r2s.dtb
> +├── rootfs.ext2
> +├── rootfs.ext4 -> rootfs.ext2
> +├── rootfs.tar
> +├── sdcard.img
> +├── u-boot.bin
> +└── u-boot.itb
> +
> +How to write the SD card
> +========================
> +
> +Once the build process is finished you will have an image called "sdcard.img"
> +in the output/images/ directory.
> +
> +Copy the bootable "sdcard.img" onto an SD card with "dd":
> +
> + $ sudo dd if=output/images/sdcard.img of=/dev/sdX
> + $ sudo sync
> +
> +Insert the micro SDcard in your Nanopi R2S and power it up. The console
> +is on the serial line, 1500000 8N1.
> +
> +Notes
> +=====
> +
> +This configuration can also be used to drive the Friendlyarm Nanopi Neo3 board.
> diff --git a/configs/friendlyarm_nanopi_r2s_defconfig b/configs/friendlyarm_nanopi_r2s_defconfig
> new file mode 100644
> index 0000000000..6fcfcd7159
> --- /dev/null
> +++ b/configs/friendlyarm_nanopi_r2s_defconfig
> @@ -0,0 +1,41 @@
> +BR2_aarch64=y
> +BR2_ARM_FPU_VFPV4=y
On aarch64 this ^^^ became useless so you can drop it
> +BR2_TARGET_GENERIC_HOSTNAME="rk3328-nanopi-r2s"
> +BR2_TARGET_GENERIC_ISSUE="Welcome to Nanopi R2S RK3328"
> +BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-r2s/post-build.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
> +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-r2s/genimage.cfg"
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.16"
> +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3328-nanopi-r2s"
> +BR2_LINUX_KERNEL_INSTALL_TARGET=y
> +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3328"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES=""
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> +BR2_TARGET_UBOOT_CUSTOM_VERSION=y
> +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.10"
> +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-r2s-rk3328"
> +BR2_TARGET_UBOOT_NEEDS_DTC=y
> +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
> +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
> +BR2_TARGET_UBOOT_SPL=y
> +BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_MTOOLS=y
> +BR2_PACKAGE_HOST_UBOOT_TOOLS=y
Have you tested this defconfig with Gitlab-CI docker?
registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314
It helps to check if any possible host tool is missing.
Can you give a go with it?
Thank you!
Best regards
--
Giulio Benetti
Benetti Engineering sas
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Buildroot] [PATCH v3] configs/friendlyarm_nanopi_r2s: new defconfig
2022-02-03 23:40 ` Giulio Benetti
@ 2022-02-04 0:31 ` Giulio Benetti
0 siblings, 0 replies; 4+ messages in thread
From: Giulio Benetti @ 2022-02-04 0:31 UTC (permalink / raw)
To: Gilles Talis, buildroot
Hi Gilles,
On 04/02/22 00:40, Giulio Benetti wrote:
> Hi Giles,
>
> On 30/01/22 11:11, Gilles Talis wrote:
>> The NanoPi R2S is a FriendlyElec mini-router based on:
>>
>> - Rockchip RK3328 SoC
>> - 1GB (or 2GB) DDR4 RAM
>> - Gigabit Ethernet (WAN)
>> - Gigabit Ethernet (USB3) (LAN)
>> - USB 2.0 Host Port
>> - MicroSD slot
>> - Reset button
>> - WAN - LAN - SYS LED
>>
>> https://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=282
>>
>> Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
>> ---
>> Changes v1 -> v2:
>> - Drop VFAT partition (kernel, DTB and ext4linux.conf in ext4 partition)
>>
>> Changes v2 -> v3:
>> - Use fixed versions of u-boot, kernel and TF-A
>> ---
>> DEVELOPERS | 2 +
>> board/friendlyarm/nanopi-r2s/extlinux.conf | 4 ++
>> board/friendlyarm/nanopi-r2s/genimage.cfg | 22 +++++++++
>> board/friendlyarm/nanopi-r2s/post-build.sh | 5 ++
>> board/friendlyarm/nanopi-r2s/readme.txt | 57 ++++++++++++++++++++++
>> configs/friendlyarm_nanopi_r2s_defconfig | 41 ++++++++++++++++
>> 6 files changed, 131 insertions(+)
>> create mode 100644 board/friendlyarm/nanopi-r2s/extlinux.conf
>> create mode 100644 board/friendlyarm/nanopi-r2s/genimage.cfg
>> create mode 100755 board/friendlyarm/nanopi-r2s/post-build.sh
>> create mode 100644 board/friendlyarm/nanopi-r2s/readme.txt
>> create mode 100644 configs/friendlyarm_nanopi_r2s_defconfig
>>
>> diff --git a/DEVELOPERS b/DEVELOPERS
>> index fe8de1916e..f8a062558c 100644
>> --- a/DEVELOPERS
>> +++ b/DEVELOPERS
>> @@ -1073,7 +1073,9 @@ F: configs/qemu_*
>>
>> N: Gilles Talis <gilles.talis@gmail.com>
>> F: board/freescale/imx8mmevk/
>> +F: board/friendlyarm/nanopi-r2s/
>> F: configs/freescale_imx8mmevk_defconfig
>> +F: configs/friendlyarm_nanopi_r2s_defconfig
>> F: package/cctz/
>> F: package/faad2/
>> F: package/fdk-aac/
>> diff --git a/board/friendlyarm/nanopi-r2s/extlinux.conf b/board/friendlyarm/nanopi-r2s/extlinux.conf
>> new file mode 100644
>> index 0000000000..1ea0cdd8a5
>> --- /dev/null
>> +++ b/board/friendlyarm/nanopi-r2s/extlinux.conf
>> @@ -0,0 +1,4 @@
>> +label NanoPi R2S linux
>> + kernel /boot/Image
>> + devicetree /boot/rk3328-nanopi-r2s.dtb
>> + append root=/dev/mmcblk0p1 rw rootwait
>> diff --git a/board/friendlyarm/nanopi-r2s/genimage.cfg b/board/friendlyarm/nanopi-r2s/genimage.cfg
>> new file mode 100644
>> index 0000000000..a686b4f14e
>> --- /dev/null
>> +++ b/board/friendlyarm/nanopi-r2s/genimage.cfg
>> @@ -0,0 +1,22 @@
>> +image sdcard.img {
>> + hdimage {
>> + }
>> +
>> + partition u-boot-tpl-spl-dtb {
>> + in-partition-table = "no"
>> + image = "idbloader.img"
>> + offset = 32K
>> + }
>> +
>> + partition u-boot-dtb {
>> + in-partition-table = "no"
>> + image = "u-boot.itb"
>> + offset = 8M
>> + }
>> +
>> + partition rootfs {
>> + partition-type = 0x83
>
> This ^^^ will fail due to latest genimage version. You can't specify
> partition-type anymore but you have to specify:
> partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
>
> That means "Root partition (64-bit ARM/AArch64)", check this out:
> https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs
This is not true since you're not using "gpt" partition table. So you leave:
partition-type = 0x83
Sorry for the noise!
Best regards
--
Giulio Benetti
Benetti Engineering sas
>> + offset = 16M
>> + image = "rootfs.ext4"
>> + }
>> +}
>> diff --git a/board/friendlyarm/nanopi-r2s/post-build.sh b/board/friendlyarm/nanopi-r2s/post-build.sh
>> new file mode 100755
>> index 0000000000..1f5ff6a611
>> --- /dev/null
>> +++ b/board/friendlyarm/nanopi-r2s/post-build.sh
>> @@ -0,0 +1,5 @@
>> +#!/bin/sh
>> +
>> +BOARD_DIR="$(dirname $0)"
>> +
>> +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
>> diff --git a/board/friendlyarm/nanopi-r2s/readme.txt b/board/friendlyarm/nanopi-r2s/readme.txt
>> new file mode 100644
>> index 0000000000..6d291cdd60
>> --- /dev/null
>> +++ b/board/friendlyarm/nanopi-r2s/readme.txt
>> @@ -0,0 +1,57 @@
>> +Intro
>> +=====
>> +
>> +This default configuration will allow you to start experimenting with the
>> +buildroot environment for the Nanopi R2S. With the current configuration
>> +it will bring-up the board, and allow access through the serial console.
>> +
>> +Nanopi R2S link:
>> +https://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=282
>> +
>> +This configuration uses ATF, U-Boot mainline and kernel mainline.
>> +
>> +How to build
>> +============
>> +
>> + $ make friendlyarm_nanopi_r2s_defconfig
>> + $ make
>> +
>> +Note: you will need access to the internet to download the required
>> +sources.
>> +
>> +Files created in output directory
>> +=================================
>> +
>> +output/images
>> +
>> +├── bl31.elf
>> +├── boot.vfat
>> +├── extlinux
>> +├── idbloader.img
>> +├── Image
>> +├── rk3328-nanopi-r2s.dtb
>> +├── rootfs.ext2
>> +├── rootfs.ext4 -> rootfs.ext2
>> +├── rootfs.tar
>> +├── sdcard.img
>> +├── u-boot.bin
>> +└── u-boot.itb
>> +
>> +How to write the SD card
>> +========================
>> +
>> +Once the build process is finished you will have an image called "sdcard.img"
>> +in the output/images/ directory.
>> +
>> +Copy the bootable "sdcard.img" onto an SD card with "dd":
>> +
>> + $ sudo dd if=output/images/sdcard.img of=/dev/sdX
>> + $ sudo sync
>> +
>> +Insert the micro SDcard in your Nanopi R2S and power it up. The console
>> +is on the serial line, 1500000 8N1.
>> +
>> +Notes
>> +=====
>> +
>> +This configuration can also be used to drive the Friendlyarm Nanopi Neo3 board.
>> diff --git a/configs/friendlyarm_nanopi_r2s_defconfig b/configs/friendlyarm_nanopi_r2s_defconfig
>> new file mode 100644
>> index 0000000000..6fcfcd7159
>> --- /dev/null
>> +++ b/configs/friendlyarm_nanopi_r2s_defconfig
>> @@ -0,0 +1,41 @@
>> +BR2_aarch64=y
>> +BR2_ARM_FPU_VFPV4=y
>
> On aarch64 this ^^^ became useless so you can drop it
>
>> +BR2_TARGET_GENERIC_HOSTNAME="rk3328-nanopi-r2s"
>> +BR2_TARGET_GENERIC_ISSUE="Welcome to Nanopi R2S RK3328"
>> +BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-r2s/post-build.sh"
>> +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
>> +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-r2s/genimage.cfg"
>> +BR2_LINUX_KERNEL=y
>> +BR2_LINUX_KERNEL_CUSTOM_VERSION=y
>> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.16"
>> +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
>> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
>> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3328-nanopi-r2s"
>> +BR2_LINUX_KERNEL_INSTALL_TARGET=y
>> +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
>> +BR2_TARGET_ROOTFS_EXT2=y
>> +BR2_TARGET_ROOTFS_EXT2_4=y
>> +BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
>> +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
>> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
>> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5"
>> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3328"
>> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES=""
>> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y
>> +BR2_TARGET_UBOOT=y
>> +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
>> +BR2_TARGET_UBOOT_CUSTOM_VERSION=y
>> +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.10"
>> +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-r2s-rk3328"
>> +BR2_TARGET_UBOOT_NEEDS_DTC=y
>> +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
>> +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
>> +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
>> +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
>> +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
>> +BR2_TARGET_UBOOT_SPL=y
>> +BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
>> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
>> +BR2_PACKAGE_HOST_GENIMAGE=y
>> +BR2_PACKAGE_HOST_MTOOLS=y
>> +BR2_PACKAGE_HOST_UBOOT_TOOLS=y
>
> Have you tested this defconfig with Gitlab-CI docker?
> registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314
>
> It helps to check if any possible host tool is missing.
>
> Can you give a go with it?
>
> Thank you!
>
> Best regards
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Buildroot] [PATCH v3] configs/friendlyarm_nanopi_r2s: new defconfig
2022-01-30 10:11 [Buildroot] [PATCH v3] configs/friendlyarm_nanopi_r2s: new defconfig Gilles Talis
2022-02-03 23:40 ` Giulio Benetti
@ 2022-02-12 13:46 ` Arnout Vandecappelle
1 sibling, 0 replies; 4+ messages in thread
From: Arnout Vandecappelle @ 2022-02-12 13:46 UTC (permalink / raw)
To: Gilles Talis, buildroot
On 30/01/2022 11:11, Gilles Talis wrote:
> The NanoPi R2S is a FriendlyElec mini-router based on:
>
> - Rockchip RK3328 SoC
> - 1GB (or 2GB) DDR4 RAM
> - Gigabit Ethernet (WAN)
> - Gigabit Ethernet (USB3) (LAN)
> - USB 2.0 Host Port
> - MicroSD slot
> - Reset button
> - WAN - LAN - SYS LED
>
> https://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=282
>
> Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
[snip]
> diff --git a/configs/friendlyarm_nanopi_r2s_defconfig b/configs/friendlyarm_nanopi_r2s_defconfig
> new file mode 100644
> index 0000000000..6fcfcd7159
> --- /dev/null
> +++ b/configs/friendlyarm_nanopi_r2s_defconfig
> @@ -0,0 +1,41 @@
> +BR2_aarch64=y
I've added an explicit BR2_cortex_a53=y
> +BR2_ARM_FPU_VFPV4=y
> +BR2_TARGET_GENERIC_HOSTNAME="rk3328-nanopi-r2s"
> +BR2_TARGET_GENERIC_ISSUE="Welcome to Nanopi R2S RK3328"
> +BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-r2s/post-build.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
> +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-r2s/genimage.cfg"
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.16"
> +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3328-nanopi-r2s"
> +BR2_LINUX_KERNEL_INSTALL_TARGET=y
> +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3328"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES=""
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> +BR2_TARGET_UBOOT_CUSTOM_VERSION=y
> +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.10"
> +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-r2s-rk3328"
> +BR2_TARGET_UBOOT_NEEDS_DTC=y
> +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
python3 is not enough, it uses pylibfdt, so I added
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
> +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
> +BR2_TARGET_UBOOT_SPL=y
> +BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
Since you switch to ext4-only, dosfstools and mtools are not longer needed, so
I removed those.
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_MTOOLS=y
> +BR2_PACKAGE_HOST_UBOOT_TOOLS=y
I don't think this is needed either, but I wasn't 100% sure so I kept it.
Applied to master with those changes, thanks.
Regards,
Arnout
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-02-12 13:46 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-30 10:11 [Buildroot] [PATCH v3] configs/friendlyarm_nanopi_r2s: new defconfig Gilles Talis
2022-02-03 23:40 ` Giulio Benetti
2022-02-04 0:31 ` Giulio Benetti
2022-02-12 13:46 ` Arnout Vandecappelle
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.