* [Buildroot] [pull request] Pull request for branch for-2010.11/remove-deprecated-packages
@ 2010-09-12 18:33 Thomas Petazzoni
2010-09-12 18:33 ` [Buildroot] [PATCH 1/5] pcmcia: remove deprecated package Thomas Petazzoni
` (5 more replies)
0 siblings, 6 replies; 7+ messages in thread
From: Thomas Petazzoni @ 2010-09-12 18:33 UTC (permalink / raw)
To: buildroot
Hello,
This set of patches removes five packages that were marked as
deprecated and to be removed in the release notes of 2010.08 :
* The GTK 1.x stack, and its only user in Buildroot, the Dillo web
browser. Newer versions of Dillo use FLTK 2, if someone needs it,
we can package it.
* The pcmcia-cs package, which is useless with 2.6 kernels.
Peter: the libgtk12 removal contains a patch that has a line longer
than 998, so if you apply the patch using the e-mail sent to the list,
it may not work. Instead, could you pull the branch directly from
git.busybox.net ?
Thanks,
Thomas
The following changes since commit 33070528796dafe90ebab836356fea03f2dc24f9:
Marcus Osdoba (1):
usbutils: bump to 0.90
are available in the git repository at:
git://git.busybox.net/~tpetazzoni/git/buildroot for-2010.11/remove-deprecated-packages
Thomas Petazzoni (5):
pcmcia: remove deprecated package
dillo: remove deprecated package
libgtk12: Remove deprecated package
libglib12: remove deprecated package
microwin: remove deprecated package
configs/arm_nptl_toolchain_defconfig | 1 -
configs/arm_toolchain_defconfig | 1 -
configs/at91rm9200df_defconfig | 2 -
configs/at91rm9200df_ext_bare_defconfig | 1 -
configs/at91rm9200df_ext_defconfig | 2 -
configs/at91sam9260dfc_defconfig | 2 -
configs/at91sam9260dfc_ext_bare_defconfig | 1 -
configs/at91sam9260dfc_ext_defconfig | 2 -
configs/at91sam9260pf_defconfig | 2 -
configs/at91sam9261ek_defconfig | 2 -
configs/at91sam9261ek_ext_bare_defconfig | 1 -
configs/at91sam9261ek_ext_defconfig | 2 -
configs/at91sam9263ek_defconfig | 2 -
configs/at91sam9263ek_ext_bare_defconfig | 1 -
configs/at91sam9263ek_ext_defconfig | 2 -
configs/at91sam9g20dfc_defconfig | 2 -
configs/at91sam9g20dfc_ext_bare_defconfig | 1 -
configs/at91sam9g20dfc_ext_defconfig | 2 -
configs/atngw100-base_defconfig | 2 -
configs/atngw100_defconfig | 2 -
configs/atstk1005_defconfig | 2 -
configs/atstk100x_defconfig | 2 -
configs/i386_defconfig | 2 -
configs/i686_defconfig | 2 -
configs/integrator926_defconfig | 2 -
configs/integrator926_huge_defconfig | 2 -
configs/kb9202_defconfig | 2 -
configs/v100sc2_defconfig | 1 -
package/Config.in | 7 -
package/dillo/Config.in | 13 -
package/dillo/dillo.mk | 58 -
package/libglib12/Config.in | 7 -
package/libglib12/glib-1.2.10-gcc34-fix.patch | 41 -
package/libglib12/libglib-libtool.patch | 88 -
package/libglib12/libglib12.mk | 97 -
package/libglib12/libglib_configure.patch | 1800 -
package/libgtk12/Config.in | 9 -
package/libgtk12/gtk+1.2-reconf.patch | 643 -
package/libgtk12/libgtk12.mk | 105 -
package/libgtk12/no-xwc.patch | 267 -
package/libgtk12/timezone-fix.patch | 15 -
package/libgtk12/update-libtool.patch |50327 -------------------------
package/microwin/Config.in | 9 -
package/microwin/microwin.mk | 61 -
package/pcmcia/Config.in | 9 -
package/pcmcia/pcmcia.mk | 114 -
package/pcmcia/pcmcia.patch | 123 -
47 files changed, 0 insertions(+), 53841 deletions(-)
delete mode 100644 package/dillo/Config.in
delete mode 100644 package/dillo/dillo.mk
delete mode 100644 package/libglib12/Config.in
delete mode 100644 package/libglib12/glib-1.2.10-gcc34-fix.patch
delete mode 100644 package/libglib12/libglib-libtool.patch
delete mode 100644 package/libglib12/libglib12.mk
delete mode 100644 package/libglib12/libglib_configure.patch
delete mode 100644 package/libgtk12/Config.in
delete mode 100644 package/libgtk12/gtk+1.2-reconf.patch
delete mode 100644 package/libgtk12/libgtk12.mk
delete mode 100644 package/libgtk12/no-xwc.patch
delete mode 100644 package/libgtk12/timezone-fix.patch
delete mode 100644 package/libgtk12/update-libtool.patch
delete mode 100644 package/microwin/Config.in
delete mode 100644 package/microwin/microwin.mk
delete mode 100644 package/pcmcia/Config.in
delete mode 100644 package/pcmcia/pcmcia.mk
delete mode 100644 package/pcmcia/pcmcia.patch
Thanks,
--
Thomas Petazzoni
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] [PATCH 1/5] pcmcia: remove deprecated package
2010-09-12 18:33 [Buildroot] [pull request] Pull request for branch for-2010.11/remove-deprecated-packages Thomas Petazzoni
@ 2010-09-12 18:33 ` Thomas Petazzoni
2010-09-12 18:33 ` [Buildroot] [PATCH 2/5] dillo: " Thomas Petazzoni
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Thomas Petazzoni @ 2010-09-12 18:33 UTC (permalink / raw)
To: buildroot
As stated on http://pcmcia-cs.sourceforge.net/: "The Linux pcmcia-cs
package is officially deprecated. It can only be used with 2.4 and
older kernels.".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
configs/at91rm9200df_defconfig | 1 -
configs/at91rm9200df_ext_defconfig | 1 -
configs/at91sam9260dfc_defconfig | 1 -
configs/at91sam9260dfc_ext_defconfig | 1 -
configs/at91sam9260pf_defconfig | 1 -
configs/at91sam9261ek_defconfig | 1 -
configs/at91sam9261ek_ext_defconfig | 1 -
configs/at91sam9263ek_defconfig | 1 -
configs/at91sam9263ek_ext_defconfig | 1 -
configs/at91sam9g20dfc_defconfig | 1 -
configs/at91sam9g20dfc_ext_defconfig | 1 -
configs/atngw100-base_defconfig | 1 -
configs/atngw100_defconfig | 1 -
configs/atstk1005_defconfig | 1 -
configs/atstk100x_defconfig | 1 -
configs/i386_defconfig | 1 -
configs/i686_defconfig | 1 -
configs/integrator926_defconfig | 1 -
configs/integrator926_huge_defconfig | 1 -
configs/kb9202_defconfig | 1 -
package/Config.in | 1 -
package/pcmcia/Config.in | 9 ---
package/pcmcia/pcmcia.mk | 114 -------------------------------
package/pcmcia/pcmcia.patch | 123 ----------------------------------
24 files changed, 0 insertions(+), 267 deletions(-)
delete mode 100644 package/pcmcia/Config.in
delete mode 100644 package/pcmcia/pcmcia.mk
delete mode 100644 package/pcmcia/pcmcia.patch
diff --git a/configs/at91rm9200df_defconfig b/configs/at91rm9200df_defconfig
index 727a6ea..8abbef9 100644
--- a/configs/at91rm9200df_defconfig
+++ b/configs/at91rm9200df_defconfig
@@ -623,7 +623,6 @@ BR2_PACKAGE_MTD_NFTLDUMP=y
BR2_PACKAGE_MTD_SUMTOOL=y
# BR2_PACKAGE_NTFS-3G is not set
# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_PCMCIA is not set
BR2_PACKAGE_SETSERIAL=y
# BR2_PACKAGE_SMARTMONTOOLS is not set
BR2_PACKAGE_UDEV_VOLUME_ID=y
diff --git a/configs/at91rm9200df_ext_defconfig b/configs/at91rm9200df_ext_defconfig
index c73e372..54755e7 100644
--- a/configs/at91rm9200df_ext_defconfig
+++ b/configs/at91rm9200df_ext_defconfig
@@ -552,7 +552,6 @@ BR2_PACKAGE_MTD_NFTLDUMP=y
BR2_PACKAGE_MTD_SUMTOOL=y
# BR2_PACKAGE_NTFS-3G is not set
# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_PCMCIA is not set
BR2_PACKAGE_SETSERIAL=y
# BR2_PACKAGE_SMARTMONTOOLS is not set
BR2_PACKAGE_UDEV_VOLUME_ID=y
diff --git a/configs/at91sam9260dfc_defconfig b/configs/at91sam9260dfc_defconfig
index de002c4..c0dbac1 100644
--- a/configs/at91sam9260dfc_defconfig
+++ b/configs/at91sam9260dfc_defconfig
@@ -637,7 +637,6 @@ BR2_PACKAGE_MTD_NFTLDUMP=y
BR2_PACKAGE_MTD_SUMTOOL=y
# BR2_PACKAGE_NTFS-3G is not set
# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_PCMCIA is not set
BR2_PACKAGE_SETSERIAL=y
# BR2_PACKAGE_SMARTMONTOOLS is not set
BR2_PACKAGE_UDEV_VOLUME_ID=y
diff --git a/configs/at91sam9260dfc_ext_defconfig b/configs/at91sam9260dfc_ext_defconfig
index 91cdedd..3a6191d 100644
--- a/configs/at91sam9260dfc_ext_defconfig
+++ b/configs/at91sam9260dfc_ext_defconfig
@@ -560,7 +560,6 @@ BR2_PACKAGE_MTD_NFTLDUMP=y
BR2_PACKAGE_MTD_SUMTOOL=y
# BR2_PACKAGE_NTFS-3G is not set
# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_PCMCIA is not set
BR2_PACKAGE_SETSERIAL=y
# BR2_PACKAGE_SMARTMONTOOLS is not set
BR2_PACKAGE_UDEV_VOLUME_ID=y
diff --git a/configs/at91sam9260pf_defconfig b/configs/at91sam9260pf_defconfig
index ab29133..0bc17ae 100644
--- a/configs/at91sam9260pf_defconfig
+++ b/configs/at91sam9260pf_defconfig
@@ -423,7 +423,6 @@ BR2_BLOCKDEV_SUPPORT=y
# BR2_PACKAGE_MKDOSFS is not set
# BR2_PACKAGE_MTD is not set
# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_PCMCIA is not set
# BR2_PACKAGE_RAIDTOOLS is not set
# BR2_PACKAGE_SETSERIAL is not set
# BR2_PACKAGE_SFDISK is not set
diff --git a/configs/at91sam9261ek_defconfig b/configs/at91sam9261ek_defconfig
index 0a1fc51..dd63d5b 100644
--- a/configs/at91sam9261ek_defconfig
+++ b/configs/at91sam9261ek_defconfig
@@ -580,7 +580,6 @@ BR2_PACKAGE_MTD_NFTLDUMP=y
BR2_PACKAGE_MTD_SUMTOOL=y
# BR2_PACKAGE_NTFS-3G is not set
# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_PCMCIA is not set
BR2_PACKAGE_SETSERIAL=y
# BR2_PACKAGE_SMARTMONTOOLS is not set
BR2_PACKAGE_UDEV_VOLUME_ID=y
diff --git a/configs/at91sam9261ek_ext_defconfig b/configs/at91sam9261ek_ext_defconfig
index 6ebe9fd..367bcfa 100644
--- a/configs/at91sam9261ek_ext_defconfig
+++ b/configs/at91sam9261ek_ext_defconfig
@@ -539,7 +539,6 @@ BR2_PACKAGE_MTD_NFTLDUMP=y
BR2_PACKAGE_MTD_SUMTOOL=y
# BR2_PACKAGE_NTFS-3G is not set
# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_PCMCIA is not set
BR2_PACKAGE_SETSERIAL=y
# BR2_PACKAGE_SMARTMONTOOLS is not set
BR2_PACKAGE_UDEV_VOLUME_ID=y
diff --git a/configs/at91sam9263ek_defconfig b/configs/at91sam9263ek_defconfig
index d293108..8fb9b00 100644
--- a/configs/at91sam9263ek_defconfig
+++ b/configs/at91sam9263ek_defconfig
@@ -577,7 +577,6 @@ BR2_PACKAGE_MTD_NFTLDUMP=y
BR2_PACKAGE_MTD_SUMTOOL=y
# BR2_PACKAGE_NTFS-3G is not set
# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_PCMCIA is not set
BR2_PACKAGE_SETSERIAL=y
# BR2_PACKAGE_SMARTMONTOOLS is not set
BR2_PACKAGE_UDEV_VOLUME_ID=y
diff --git a/configs/at91sam9263ek_ext_defconfig b/configs/at91sam9263ek_ext_defconfig
index 843b0fb..3f6e478 100644
--- a/configs/at91sam9263ek_ext_defconfig
+++ b/configs/at91sam9263ek_ext_defconfig
@@ -502,7 +502,6 @@ BR2_PACKAGE_MTD_NFTLDUMP=y
BR2_PACKAGE_MTD_SUMTOOL=y
# BR2_PACKAGE_NTFS-3G is not set
# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_PCMCIA is not set
BR2_PACKAGE_SETSERIAL=y
# BR2_PACKAGE_SMARTMONTOOLS is not set
BR2_PACKAGE_UDEV_VOLUME_ID=y
diff --git a/configs/at91sam9g20dfc_defconfig b/configs/at91sam9g20dfc_defconfig
index a9347a8..bdab741 100644
--- a/configs/at91sam9g20dfc_defconfig
+++ b/configs/at91sam9g20dfc_defconfig
@@ -573,7 +573,6 @@ BR2_PACKAGE_MTD_NFTLDUMP=y
BR2_PACKAGE_MTD_SUMTOOL=y
# BR2_PACKAGE_NTFS-3G is not set
# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_PCMCIA is not set
BR2_PACKAGE_SETSERIAL=y
# BR2_PACKAGE_SMARTMONTOOLS is not set
BR2_PACKAGE_UDEV_VOLUME_ID=y
diff --git a/configs/at91sam9g20dfc_ext_defconfig b/configs/at91sam9g20dfc_ext_defconfig
index bd96723..cb21324 100644
--- a/configs/at91sam9g20dfc_ext_defconfig
+++ b/configs/at91sam9g20dfc_ext_defconfig
@@ -560,7 +560,6 @@ BR2_PACKAGE_MTD_NFTLDUMP=y
BR2_PACKAGE_MTD_SUMTOOL=y
# BR2_PACKAGE_NTFS-3G is not set
# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_PCMCIA is not set
BR2_PACKAGE_SETSERIAL=y
# BR2_PACKAGE_SMARTMONTOOLS is not set
BR2_PACKAGE_UDEV_VOLUME_ID=y
diff --git a/configs/atngw100-base_defconfig b/configs/atngw100-base_defconfig
index 116f671..0af8bc2 100644
--- a/configs/atngw100-base_defconfig
+++ b/configs/atngw100-base_defconfig
@@ -486,7 +486,6 @@ BR2_PACKAGE_MTD_NANDWRITE=y
BR2_PACKAGE_MTD_SUMTOOL=y
# BR2_PACKAGE_NTFS_3G is not set
# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_PCMCIA is not set
# BR2_PACKAGE_SETSERIAL is not set
# BR2_PACKAGE_SMARTMONTOOLS is not set
# BR2_PACKAGE_USBMOUNT is not set
diff --git a/configs/atngw100_defconfig b/configs/atngw100_defconfig
index 50c376b..01d0d7a 100644
--- a/configs/atngw100_defconfig
+++ b/configs/atngw100_defconfig
@@ -428,7 +428,6 @@ BR2_PACKAGE_MTD_UBIUPDATEVOL=y
# BR2_PACKAGE_NTFS_3G is not set
# BR2_PACKAGE_NTFSPROGS is not set
# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_PCMCIA is not set
# BR2_PACKAGE_SETSERIAL is not set
# BR2_PACKAGE_SMARTMONTOOLS is not set
# BR2_PACKAGE_SQUASHFS is not set
diff --git a/configs/atstk1005_defconfig b/configs/atstk1005_defconfig
index d95b666..2e6d94f 100644
--- a/configs/atstk1005_defconfig
+++ b/configs/atstk1005_defconfig
@@ -537,7 +537,6 @@ BR2_PACKAGE_MTD_MTD_DEBUG=y
# BR2_PACKAGE_MTD_SUMTOOL is not set
# BR2_PACKAGE_NTFS-3G is not set
# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_PCMCIA is not set
# BR2_PACKAGE_SETSERIAL is not set
# BR2_PACKAGE_SMARTMONTOOLS is not set
# BR2_PACKAGE_USBMOUNT is not set
diff --git a/configs/atstk100x_defconfig b/configs/atstk100x_defconfig
index 3069f6a..ca9902f 100644
--- a/configs/atstk100x_defconfig
+++ b/configs/atstk100x_defconfig
@@ -544,7 +544,6 @@ BR2_PACKAGE_MTD_MTD_DEBUG=y
# ntfs-3g requires a toolchain with LARGEFILE and WCHAR support
#
# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_PCMCIA is not set
# BR2_PACKAGE_SETSERIAL is not set
# BR2_PACKAGE_SFDISK is not set
# BR2_PACKAGE_SMARTMONTOOLS is not set
diff --git a/configs/i386_defconfig b/configs/i386_defconfig
index e30ec3f..184bc30 100644
--- a/configs/i386_defconfig
+++ b/configs/i386_defconfig
@@ -484,7 +484,6 @@ BR2_PACKAGE_MTD_NFTLDUMP=y
BR2_PACKAGE_MTD_SUMTOOL=y
# BR2_PACKAGE_NTFS_3G is not set
# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_PCMCIA is not set
# BR2_PACKAGE_SETSERIAL is not set
# BR2_PACKAGE_SMARTMONTOOLS is not set
# BR2_PACKAGE_USBMOUNT is not set
diff --git a/configs/i686_defconfig b/configs/i686_defconfig
index 916454d..e537a8a 100644
--- a/configs/i686_defconfig
+++ b/configs/i686_defconfig
@@ -484,7 +484,6 @@ BR2_PACKAGE_MTD_NFTLDUMP=y
BR2_PACKAGE_MTD_SUMTOOL=y
# BR2_PACKAGE_NTFS_3G is not set
# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_PCMCIA is not set
# BR2_PACKAGE_SETSERIAL is not set
# BR2_PACKAGE_SMARTMONTOOLS is not set
# BR2_PACKAGE_USBMOUNT is not set
diff --git a/configs/integrator926_defconfig b/configs/integrator926_defconfig
index 3d82ba2..cd25820 100644
--- a/configs/integrator926_defconfig
+++ b/configs/integrator926_defconfig
@@ -471,7 +471,6 @@ BR2_PACKAGE_TCPDUMP=y
# BR2_PACKAGE_MTD is not set
# BR2_PACKAGE_NTFS-3G is not set
BR2_PACKAGE_PCIUTILS=y
-# BR2_PACKAGE_PCMCIA is not set
# BR2_PACKAGE_SETSERIAL is not set
# BR2_PACKAGE_SMARTMONTOOLS is not set
# BR2_PACKAGE_USBMOUNT is not set
diff --git a/configs/integrator926_huge_defconfig b/configs/integrator926_huge_defconfig
index ca13339..cc6e866 100644
--- a/configs/integrator926_huge_defconfig
+++ b/configs/integrator926_huge_defconfig
@@ -453,7 +453,6 @@ BR2_PACKAGE_TCPDUMP=y
# BR2_PACKAGE_MTD is not set
# BR2_PACKAGE_NTFS-3G is not set
BR2_PACKAGE_PCIUTILS=y
-# BR2_PACKAGE_PCMCIA is not set
# BR2_PACKAGE_SETSERIAL is not set
# BR2_PACKAGE_SMARTMONTOOLS is not set
# BR2_PACKAGE_USBMOUNT is not set
diff --git a/configs/kb9202_defconfig b/configs/kb9202_defconfig
index 4f392ab..842a8a6 100644
--- a/configs/kb9202_defconfig
+++ b/configs/kb9202_defconfig
@@ -473,7 +473,6 @@ BR2_BLOCKDEV_SUPPORT=y
# BR2_PACKAGE_MTD is not set
# BR2_PACKAGE_NTFS-3G is not set
# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_PCMCIA is not set
# BR2_PACKAGE_RAIDTOOLS is not set
# BR2_PACKAGE_SETSERIAL is not set
# BR2_PACKAGE_SFDISK is not set
diff --git a/package/Config.in b/package/Config.in
index d60d8ef..ce730ac 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -180,7 +180,6 @@ source "package/mtd/Config.in"
source "package/ntfs-3g/Config.in"
source "package/ntfsprogs/Config.in"
source "package/pciutils/Config.in"
-source "package/pcmcia/Config.in"
source "package/setserial/Config.in"
if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
# busybox has fdisk
diff --git a/package/pcmcia/Config.in b/package/pcmcia/Config.in
deleted file mode 100644
index de1e33b..0000000
--- a/package/pcmcia/Config.in
+++ /dev/null
@@ -1,9 +0,0 @@
-config BR2_PACKAGE_PCMCIA
- bool "pcmcia"
- depends on BR2_PACKAGE_LINUX
- # The website says it's deprecated after 2.4.x kernels
- depends on BR2_DEPRECATED
- help
- PCMCIA tools for Linux.
-
- http://pcmcia-cs.sourceforge.net/
diff --git a/package/pcmcia/pcmcia.mk b/package/pcmcia/pcmcia.mk
deleted file mode 100644
index 8080b87..0000000
--- a/package/pcmcia/pcmcia.mk
+++ /dev/null
@@ -1,114 +0,0 @@
-#############################################################
-#
-# pcmcia card services
-#
-#############################################################
-# Copyright (C) 2001-2003 by Erik Andersen <andersen@codepoet.org>
-# Copyright (C) 2002 by Tim Riker <Tim@Rikers.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Library General Public License as
-# published by the Free Software Foundation; either version 2 of the
-# License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Library General Public License for more details.
-#
-# You should have received a copy of the GNU Library General Public
-# License along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA
-
-PCMCIA_SOURCE:=pcmcia-cs-3.2.7.tar.gz
-PCMCIA_SITE:=http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/pcmcia-cs
-PCMCIA_DIR:=$(BUILD_DIR)/pcmcia-cs-3.2.7
-PCMCIA_CAT:=$(ZCAT)
-
-$(DL_DIR)/$(PCMCIA_SOURCE):
- $(call DOWNLOAD,$(PCMCIA_SITE),$(PCMCIA_SOURCE))
-
-pcmcia-source: $(DL_DIR)/$(PCMCIA_SOURCE)
-
-$(PCMCIA_DIR)/.unpacked: $(DL_DIR)/$(PCMCIA_SOURCE)
- $(PCMCIA_CAT) $(DL_DIR)/$(PCMCIA_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
- touch $(PCMCIA_DIR)/.unpacked
-
-$(PCMCIA_DIR)/.patched: $(PCMCIA_DIR)/.unpacked
- toolchain/patch-kernel.sh $(PCMCIA_DIR) package/pcmcia/ pcmcia\*.patch
- touch $(PCMCIA_DIR)/.patched
-
-$(PCMCIA_DIR)/.configured: $(PCMCIA_DIR)/.patched
- ( cd $(PCMCIA_DIR); ./Configure --kernel=$(LINUX26_DIR) --noprompt \
- --rcdir=/etc --arch=$(ARCH) --trust --srctree --nocardbus \
- --sysv --kcc=$(TARGET_CROSS)gcc --ucc="$(TARGET_CC)" --ld=$(TARGET_CROSS)ld \
- --target=$(TARGET_DIR))
- $(SED) "s/pump/udhcpc/" $(PCMCIA_DIR)/etc/network
- $(SED) "s/ide_cs/ide-cs/" $(PCMCIA_DIR)/etc/config
- $(SED) "s/bind \"wvlan_cs\"/bind \"orinoco_cs\"/g" $(PCMCIA_DIR)/etc/config
- touch $(PCMCIA_DIR)/.configured
-
-$(PCMCIA_DIR)/cardmgr/cardmgr: $(PCMCIA_DIR)/.configured
- $(MAKE) -C $(PCMCIA_DIR) -i all
- -A=`find $(PCMCIA_DIR) -type f -perm +111`; \
- for fo in $$A; do \
- file $$fo | grep "ELF" | grep "executable" > /dev/null 2>&1; \
- if [ $$? = 0 ]; then \
- $(STRIPCMD) $$fo; \
- fi; \
- done
- touch -c $(PCMCIA_DIR)/cardmgr/cardmgr
-
-$(TARGET_DIR)/sbin/cardmgr: $(PCMCIA_DIR)/cardmgr/cardmgr
- rm -rf $(TARGET_DIR)/etc/pcmcia
- $(MAKE) -i -C $(PCMCIA_DIR) install
- rm -rf $(TARGET_DIR)/usr/man
- rm -rf $(TARGET_DIR)/usr/share/man
- rm -rf $(TARGET_DIR)/usr/X11R6/man
- rm -rf $(TARGET_DIR)/etc/rc.d
- rm -rf $(TARGET_DIR)/etc/rc?.d
- rm -f $(TARGET_DIR)/etc/init.d/pcmcia*
- rm -f $(TARGET_DIR)/sbin/dump_cis $(TARGET_DIR)/sbin/pack_cis
- rm -f $(TARGET_DIR)/usr/share/pnp.ids $(TARGET_DIR)/sbin/lspnp $(TARGET_DIR)/sbin/setpnp
- rm -f $(TARGET_DIR)/sbin/pcinitrd
- rm -f $(TARGET_DIR)/sbin/probe
- rm -f $(TARGET_DIR)/sbin/ide_info
- rm -f $(TARGET_DIR)/sbin/scsi_info
- rm -f $(TARGET_DIR)/sbin/ftl_check
- rm -f $(TARGET_DIR)/sbin/ftl_format
- rm -f $(TARGET_DIR)/usr/X11R6/bin/xcardinfo
- rm -rf $(TARGET_DIR)/etc/sysconfig
- mkdir -p $(TARGET_DIR)/etc/default
- cp -f $(PCMCIA_DIR)/etc/pcmcia $(TARGET_DIR)/etc/default/
- cp -f $(PCMCIA_DIR)/etc/rc.pcmcia $(TARGET_DIR)/etc/init.d/S30pcmcia
- rm -rf $(TARGET_DIR)/etc/pcmcia/cis
- chmod a+x $(TARGET_DIR)/etc/init.d/S30pcmcia
- chmod -R u+w $(TARGET_DIR)/etc/pcmcia/*
-
-# use busybox depmod.pl so we need the sources unpacked
-$(PCMCIA_DIR)/.modules.dep: $(BUSYBOX_DIR)/.configured $(TARGET_DIR)/lib/modules
- [ -d $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION) ] && \
- $(BUSYBOX_DIR)/examples/depmod.pl \
- -b $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/ \
- -F $(LINUX26_DIR)/System.map \
- > $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep
- touch $(PCMCIA_DIR)/.modules.dep
-
-pcmcia: linux26 $(TARGET_DIR)/sbin/cardmgr $(PCMCIA_DIR)/.modules.dep
-
-pcmcia-clean:
- rm -f $(TARGET_DIR)/sbin/cardmgr
- -$(MAKE) -C $(PCMCIA_DIR) clean
- rm -f $(PCMCIA_DIR)/.configured $(PCMCIA_DIR)/config.out
-
-pcmcia-dirclean:
- rm -rf $(PCMCIA_DIR)
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_PACKAGE_PCMCIA),y)
-TARGETS+=pcmcia
-endif
diff --git a/package/pcmcia/pcmcia.patch b/package/pcmcia/pcmcia.patch
deleted file mode 100644
index 121435f..0000000
--- a/package/pcmcia/pcmcia.patch
+++ /dev/null
@@ -1,123 +0,0 @@
---- pcmcia-cs-3.1.34/etc/config.opts.orig Tue Jul 9 09:36:23 2002
-+++ pcmcia-cs-3.1.34/etc/config.opts Tue Jul 9 09:37:47 2002
-@@ -5,7 +5,7 @@
-
- # System resources available for PCMCIA devices
-
--include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff
-+include port 0x100-0x4ff, port 0xc00-0xcff
- include memory 0xc0000-0xfffff
- include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff
-
-diff -urN pcmcia-cs-3.2.3.orig/etc/shared pcmcia-cs-3.2.3/etc/shared
---- pcmcia-cs-3.2.3.orig/etc/shared 2002-08-18 21:21:11.000000000 -0600
-+++ pcmcia-cs-3.2.3/etc/shared 2003-02-14 05:05:07.000000000 -0700
-@@ -2,6 +2,8 @@
- # shared 1.31 2002/08/19 03:21:11 (David Hinds)
- #
-
-+umask 022
-+
- usage ()
- {
- echo "usage: $0 [action] [device name]"
---- /dev/null 2003-01-21 22:14:35.000000000 -0700
-+++ pcmcia-cs-3.2.4/etc/pcmcia 2003-06-09 12:04:02.000000000 -0600
-@@ -0,0 +1,6 @@
-+# Defaults for pcmcia (sourced by /etc/init.d/S30pcmcia)
-+PCMCIA=yes
-+PCIC=yenta_socket
-+PCIC_OPTS=
-+CORE_OPTS=
-+CARDMGR_OPTS=
---- pcmcia-cs-3.2.4/etc/rc.pcmcia.orig 2002-08-08 00:43:43.000000000 -0600
-+++ pcmcia-cs-3.2.4/etc/rc.pcmcia 2003-06-09 15:17:28.000000000 -0600
-@@ -4,6 +4,8 @@
- #
- # This is designed to work in BSD as well as SysV init setups. See
- # the HOWTO for customization instructions.
-+# Modified to comply with Debian's standards by Brian Mays
-+# <brian@debian.org>.
-
- # Tags for Red Hat init configuration tools
- #
-@@ -26,9 +28,9 @@
- done
-
- # Source PCMCIA configuration, if available
--if [ -f /etc/pcmcia.conf ] ; then
-+if [ -f /etc/default/pcmcia ] ; then
- # Debian startup option file
-- . /etc/pcmcia.conf
-+ . /etc/default/pcmcia
- elif [ -f /etc/sysconfig/pcmcia ] ; then
- # Red Hat startup option file
- . /etc/sysconfig/pcmcia
-@@ -50,9 +52,22 @@
- done
- if [ "$PCMCIA" -a "$PCMCIA" != "yes" ] ; then exit 0 ; fi
-
-+# Debian modification: Fix PCIC for stand-alone modules.
-+# yenta_socket -> i82365 on these systems.
-+# Existence of a standalone module implies that it is preferred.
-+if [ -d /lib/modules/preferred ] ; then
-+ PC=/lib/modules/preferred/pcmcia
-+else
-+ PC=/lib/modules/`uname -r`/pcmcia
-+fi
-+if [ "$PCIC" = yenta_socket -a -e $PC/i82365.o \
-+ -a ! -L $PC/i82365.o ]; then
-+ PCIC=i82365
-+fi
-+
- usage()
- {
-- echo "Usage: $0 {start|stop|status|restart|reload}"
-+ echo "Usage: $0 {start|stop|status|restart|reload|force-reload}"
- }
-
- cleanup()
-@@ -84,7 +99,7 @@
- SC=/var/lib/pcmcia/scheme
- RUN=/var/lib/pcmcia
- else
-- SC=/var/run/pcmcia-scheme
-+ SC=/var/lib/misc/pcmcia-scheme
- RUN=/var/run
- fi
- if [ -L $SC -o ! -O $SC ] ; then rm -f $SC ; fi
-@@ -154,7 +172,7 @@
- ;;
-
- status)
-- pid=`/sbin/pidof cardmgr`
-+ pid=`/bin/pidof cardmgr`
- if [ "$pid" != "" ] ; then
- echo "cardmgr (pid $pid) is running..."
- EXITCODE=0
-@@ -164,12 +182,18 @@
- fi
- ;;
-
-- restart|reload)
-+ restart)
- $0 stop
- $0 start
- EXITCODE=$?
- ;;
-
-+ reload|force-reload)
-+ echo "Reloading $DESC configuration files."
-+ kill -1 `cat /var/run/cardmgr.pid` 2>/dev/null
-+ EXITCODE=0
-+ ;;
-+
- *)
- usage
- ;;
-@@ -179,4 +203,4 @@
- done
-
- # Only exit if we're in our own subshell
--case $0 in *rc.pcmcia) exit $EXITCODE ;; esac
-+case $0 in *pcmcia) exit $EXITCODE ;; esac
--
1.7.0.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [Buildroot] [PATCH 2/5] dillo: remove deprecated package
2010-09-12 18:33 [Buildroot] [pull request] Pull request for branch for-2010.11/remove-deprecated-packages Thomas Petazzoni
2010-09-12 18:33 ` [Buildroot] [PATCH 1/5] pcmcia: remove deprecated package Thomas Petazzoni
@ 2010-09-12 18:33 ` Thomas Petazzoni
2010-09-12 18:33 ` [Buildroot] [PATCH 3/5] libgtk12: Remove " Thomas Petazzoni
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Thomas Petazzoni @ 2010-09-12 18:33 UTC (permalink / raw)
To: buildroot
This version of Dillo, based on Gtk 1.x is no longer maintained.
If someone needs the newer version of Dillo, we'll have to package
FLTK2 first.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/Config.in | 1 -
package/dillo/Config.in | 13 ----------
package/dillo/dillo.mk | 58 -----------------------------------------------
3 files changed, 0 insertions(+), 72 deletions(-)
delete mode 100644 package/dillo/Config.in
delete mode 100644 package/dillo/dillo.mk
diff --git a/package/Config.in b/package/Config.in
index ce730ac..1e57172 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -123,7 +123,6 @@ source "package/blackbox/Config.in"
comment "X applications"
source "package/alsamixergui/Config.in"
-source "package/dillo/Config.in"
source "package/docker/Config.in"
source "package/gqview/Config.in"
source "package/gmpc/Config.in"
diff --git a/package/dillo/Config.in b/package/dillo/Config.in
deleted file mode 100644
index 63a4f7d..0000000
--- a/package/dillo/Config.in
+++ /dev/null
@@ -1,13 +0,0 @@
-config BR2_PACKAGE_DILLO
- bool "dillo"
- depends on BR2_DEPRECATED
- select BR2_PACKAGE_JPEG
- select BR2_PACKAGE_LIBGLIB12
- select BR2_PACKAGE_LIBGTK12
- select BR2_PACKAGE_ZLIB
- select BR2_PACKAGE_LIBPNG
- depends on BR2_PACKAGE_XORG7
- help
- Dillo is a small GTK+ based web browser written in C.
-
- http://www.dillo.org/
diff --git a/package/dillo/dillo.mk b/package/dillo/dillo.mk
deleted file mode 100644
index cffb827..0000000
--- a/package/dillo/dillo.mk
+++ /dev/null
@@ -1,58 +0,0 @@
-#############################################################
-#
-# dillo
-#
-#############################################################
-
-DILLO_VERSION=0.8.6
-DILLO_SOURCE=dillo-$(DILLO_VERSION).tar.bz2
-DILLO_SITE=http://www.dillo.org/download/
-DILLO_DIR=$(BUILD_DIR)/dillo-$(DILLO_VERSION)
-DILLO_CAT:=$(BZCAT)
-
-$(DL_DIR)/$(DILLO_SOURCE):
- $(call DOWNLOAD,$(DILLO_SITE),$(DILLO_SOURCE))
-
-$(DILLO_DIR)/.unpacked: $(DL_DIR)/$(DILLO_SOURCE)
- $(DILLO_CAT) $(DL_DIR)/$(DILLO_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
- touch $(DILLO_DIR)/.unpacked
-
-$(DILLO_DIR)/.configured: $(DILLO_DIR)/.unpacked
- (cd $(DILLO_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- $(TARGET_CONFIGURE_ARGS) \
- ./configure $(QUIET) \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --sysconfdir=/etc \
- --program-transform-name='' \
- --disable-dlgui \
- )
- touch $(DILLO_DIR)/.configured
-
-$(DILLO_DIR)/src/dillo: $(DILLO_DIR)/.configured
- $(MAKE) CC="$(TARGET_CC)" -C $(DILLO_DIR)
-
-$(DILLO_DIR)/.installed: $(DILLO_DIR)/src/dillo
- $(MAKE) -C $(DILLO_DIR) DESTDIR=$(TARGET_DIR) install
- touch $(DILLO_DIR)/.installed
-
-dillo: xserver_xorg-server libglib12 libgtk12 jpeg libpng $(DILLO_DIR)/.installed
-
-dillo-source: $(DL_DIR)/$(DILLO_SOURCE)
-
-dillo-clean:
- -$(MAKE) -C $(DILLO_DIR) clean
-
-dillo-dirclean:
- rm -rf $(DILLO_DIR)
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_PACKAGE_DILLO),y)
-TARGETS+=dillo
-endif
--
1.7.0.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [Buildroot] [PATCH 3/5] libgtk12: Remove deprecated package
2010-09-12 18:33 [Buildroot] [pull request] Pull request for branch for-2010.11/remove-deprecated-packages Thomas Petazzoni
2010-09-12 18:33 ` [Buildroot] [PATCH 1/5] pcmcia: remove deprecated package Thomas Petazzoni
2010-09-12 18:33 ` [Buildroot] [PATCH 2/5] dillo: " Thomas Petazzoni
@ 2010-09-12 18:33 ` Thomas Petazzoni
2010-09-12 18:33 ` [Buildroot] [PATCH 4/5] libglib12: remove " Thomas Petazzoni
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Thomas Petazzoni @ 2010-09-12 18:33 UTC (permalink / raw)
To: buildroot
The Gtk 1.x is now very old, and Gtk 2.x has been around for a long
time now. Besides Dillo that just got removed, we no longer have any
package that depend on Gtk 1.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/Config.in | 1 -
package/libgtk12/Config.in | 9 -
package/libgtk12/gtk+1.2-reconf.patch | 643 -
package/libgtk12/libgtk12.mk | 105 -
package/libgtk12/no-xwc.patch | 267 -
package/libgtk12/timezone-fix.patch | 15 -
package/libgtk12/update-libtool.patch |50327 ---------------------------------
7 files changed, 0 insertions(+), 51367 deletions(-)
delete mode 100644 package/libgtk12/Config.in
delete mode 100644 package/libgtk12/gtk+1.2-reconf.patch
delete mode 100644 package/libgtk12/libgtk12.mk
delete mode 100644 package/libgtk12/no-xwc.patch
delete mode 100644 package/libgtk12/timezone-fix.patch
delete mode 100644 package/libgtk12/update-libtool.patch
diff --git a/package/Config.in b/package/Config.in
index 1e57172..62ff1b6 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -266,7 +266,6 @@ source "package/libart/Config.in"
source "package/libdrm/Config.in"
source "package/libgail/Config.in"
source "package/libglade/Config.in"
-source "package/libgtk12/Config.in"
source "package/libgtk2/Config.in"
source "package/libpng/Config.in"
source "package/libsvgtiny/Config.in"
diff --git a/package/libgtk12/Config.in b/package/libgtk12/Config.in
deleted file mode 100644
index 7845f20..0000000
--- a/package/libgtk12/Config.in
+++ /dev/null
@@ -1,9 +0,0 @@
-config BR2_PACKAGE_LIBGTK12
- bool "libgtk12"
- depends on BR2_DEPRECATED
- select BR2_PACKAGE_LIBGLIB12
- depends on BR2_PACKAGE_XORG7
- help
- The GTK+ graphical user interface library
-
- http://www.gtk.org/
diff --git a/package/libgtk12/gtk+1.2-reconf.patch b/package/libgtk12/gtk+1.2-reconf.patch
deleted file mode 100644
index 6caf675..0000000
--- a/package/libgtk12/gtk+1.2-reconf.patch
+++ /dev/null
@@ -1,643 +0,0 @@
-fixup configure.in, acinclude.m4 and Makefile.am's for reconfigurability. make
-gtk-config use pkg-config
-
-#
-# Patch managed by http://www.holgerschurig.de/patcher.html
-#
-
---- gtk+-1.2.10/configure.in~gtk+1.2-reconf-fix
-+++ gtk+-1.2.10/configure.in
-@@ -17,7 +17,9 @@
-
- dnl we need to AC_DIVERT_PUSH/AC_DIVERT_POP these variable definitions so they
- dnl are available for $ac_help expansion (don't we all *love* autoconf?)
--AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)dnl
-+ifdef([AC_DIVERSION_NOTICE],
-+ [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-+ [AC_DIVERT_PUSH(NOTICE)])dnl
- #
- # Making releases:
- # GTK_MICRO_VERSION += 1;
-@@ -76,7 +78,10 @@
-
- dnl figure debugging default, prior to $ac_help setup
- dnl
--AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)dnl
-+ifdef([AC_DIVERSION_NOTICE],
-+ [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-+ [AC_DIVERT_PUSH(NOTICE)])dnl
-+
- if test `expr $GTK_MINOR_VERSION \% 2` = 1 ; then
- debug_default=yes
- else
-@@ -292,12 +297,9 @@
- AC_SUBST(GLIB_DEPLIBS)
-
- # Find the X11 include and library directories
--AC_PATH_X
- AC_PATH_XTRA
-
--if test "x$x_includes" = "x"; then
-- x_includes="/usr/include"
--fi
-+PKG_CHECK_MODULES(X,x11 xau)
-
- saved_cflags="$CFLAGS"
- saved_ldflags="$LDFLAGS"
---- gtk+-1.2.10/gdk/Makefile.am~gtk+1.2-reconf-fix
-+++ gtk+-1.2.10/gdk/Makefile.am
-@@ -31,7 +31,7 @@
- # setup source file variables
- #
- # GDK header files for public installation (non-generated)
--gdk_public_h_sources = @STRIP_BEGIN@ \
-+gdk_public_h_sources = \
- gdk.h \
- gdkcursors.h \
- gdkrgb.h \
-@@ -39,9 +39,9 @@
- gdkkeysyms.h \
- gdkprivate.h \
- gdktypes.h \
-- gdkx.h \
-- at STRIP_END@
--gdk_c_sources = @STRIP_BEGIN@ \
-+ gdkx.h
-+
-+gdk_c_sources = \
- gdk.c \
- gdkcc.c \
- gdkcolor.c \
-@@ -72,18 +72,16 @@
- MwmUtil.h \
- gxid_lib.h \
- gxid_proto.h \
-- gxid_lib.c \
-- at STRIP_END@
-+ gxid_lib.c
-
- #
- # setup GDK sources and their dependancies
- #
- libgdkinclude_HEADERS = $(gdk_public_h_sources)
- libgdk_la_SOURCES = $(gdk_c_sources)
--MAINTAINERCLEANFILES +=
--EXTRA_HEADERS +=
--EXTRA_DIST +=
--EXTRA_DIST +=
-+MAINTAINERCLEANFILES =
-+EXTRA_HEADERS =
-+EXTRA_DIST =
-
- #
- # rules to generate built sources
---- gtk+-1.2.10/gtk/Makefile.am~gtk+1.2-reconf-fix
-+++ gtk+-1.2.10/gtk/Makefile.am
-@@ -39,7 +39,7 @@
- # setup source file variables
- #
- # GTK+ header files for public installation (non-generated)
--gtk_public_h_sources = @STRIP_BEGIN@ \
-+gtk_public_h_sources = \
- gtk.h \
- gtkaccelgroup.h \
- gtkaccellabel.h \
-@@ -148,13 +148,13 @@
- gtkvscrollbar.h \
- gtkvseparator.h \
- gtkwidget.h \
-- gtkwindow.h \
-- at STRIP_END@
-+ gtkwindow.h
-+
- # GTK+ header files that don't get installed
--gtk_private_h_sources = @STRIP_BEGIN@ \
-- at STRIP_END@
-+gtk_private_h_sources =
-+
- # GTK+ C sources to build the library from
--gtk_c_sources = @STRIP_BEGIN@ \
-+gtk_c_sources = \
- gtkaccelgroup.c \
- gtkaccellabel.c \
- gtkadjustment.c \
-@@ -262,8 +262,8 @@
- gtkwidget.c \
- gtkwindow.c \
- fnmatch.c \
-- fnmatch.h \
-- at STRIP_END@
-+ fnmatch.h
-+
- # we use our own built_sources variable rules to avoid automake's
- # BUILT_SOURCES oddities
- # we generate frequently rebuild files piggyback on a stamp file, so sources
-@@ -271,7 +271,7 @@
- # content
- #
- # built sources that don't get installed
--gtk_built_sources = @STRIP_BEGIN@ \
-+gtk_built_sources = \
- stamp-gtk.defs \
- stamp-gtktypebuiltins.h \
- stamp-gtkmarshal.h \
-@@ -279,17 +279,18 @@
- gtktypebuiltins_ids.c \
- gtktypebuiltins_evals.c \
- gtkmarshal.c \
-- gtk.defs \
-- at STRIP_END@
-+ gtk.defs
-+
-+
- # built sources that get installed with the header files
--gtk_built_public_sources = @STRIP_BEGIN@ \
-+gtk_built_public_sources = \
- gtkmarshal.h \
-- gtktypebuiltins.h \
-- at STRIP_END@
-+ gtktypebuiltins.h
-+
- # non-header sources (headers should be specified in the above variables)
- # that don't serve as direct make target sources, i.e. they don't have
- # their own .lo rules and don't get publically installed
--gtk_extra_sources = @STRIP_BEGIN@ \
-+gtk_extra_sources = \
- gtkfeatures.h.in \
- makeenums.pl \
- makeenums.awk \
-@@ -298,8 +299,8 @@
- gtkargcollector.c \
- gtk-boxed.defs \
- genmarshal.pl \
-- gtkmarshal.list \
-- at STRIP_END@
-+ gtkmarshal.list
-+
- # Extra headers that are used for enum type array/id generation
- gdk_headers = @STRIP_BEGIN@ \
- ../gdk/gdktypes.h \
-@@ -311,9 +312,9 @@
- #
- libgtkinclude_HEADERS = $(gtk_public_h_sources) $(gtk_built_public_sources) gtkfeatures.h
- libgtk_la_SOURCES = $(gtk_c_sources)
--MAINTAINERCLEANFILES += $(gtk_built_public_sources) $(gtk_built_sources)
--EXTRA_HEADERS +=
--EXTRA_DIST += $(gtk_private_h_sources)
-+MAINTAINERCLEANFILES = $(gtk_built_public_sources) $(gtk_built_sources)
-+EXTRA_HEADERS =
-+EXTRA_DIST = $(gtk_private_h_sources)
- EXTRA_DIST += $(gtk_built_sources) $(gtk_built_public_sources) $(gtk_extra_sources)
-
- #
-@@ -321,7 +322,7 @@
- #
- # setup autogeneration dependancies
- gen_sources = xgen-gdef xgen-gtbh xgen-gtbvc xgen-gtbic xgen-gtbec xgen-gmh xgen-gmc
--CLEANFILES += $(gen_sources)
-+CLEANFILES = $(gen_sources)
- COPYING: $(gtk_built_public_sources) $(gtk_built_sources)
- $(OBJECTS): COPYING # this is our oldest-source-stamp
- # initial creation of the real stamp-* files
---- gtk+-1.2.10/docs/Makefile.am~gtk+1.2-reconf-fix
-+++ gtk+-1.2.10/docs/Makefile.am
-@@ -166,7 +166,7 @@
- echo $$p; \
- done
-
--EXTRA_DIST += \
-+EXTRA_DIST = \
- Changes-1.2.txt \
- debugging.txt \
- developers.txt \
---- gtk+-1.2.10/acinclude.m4~gtk+1.2-reconf-fix
-+++ gtk+-1.2.10/acinclude.m4
-@@ -21,428 +21,6 @@
- ## configuration script generated by Autoconf, you may include it under
- ## the same distribution terms that you use for the rest of that program.
-
--# serial 40 AC_PROG_LIBTOOL
--AC_DEFUN(AC_PROG_LIBTOOL,
--[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
--
--# Save cache, so that ltconfig can load it
--AC_CACHE_SAVE
--
--# Actually configure libtool. ac_aux_dir is where install-sh is found.
--CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
--LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
--LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
--DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
--${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
--$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
--|| AC_MSG_ERROR([libtool configure failed])
--
--# Reload cache, that may have been modified by ltconfig
--AC_CACHE_LOAD
--
--# This can be used to rebuild libtool when needed
--LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
--
--# Always use our own libtool.
--LIBTOOL='$(SHELL) $(top_builddir)/libtool'
--AC_SUBST(LIBTOOL)dnl
--
--# Redirect the config.log output again, so that the ltconfig log is not
--# clobbered by the next message.
--exec 5>>./config.log
--])
--
--AC_DEFUN(AC_LIBTOOL_SETUP,
--[AC_PREREQ(2.13)dnl
--AC_REQUIRE([AC_ENABLE_SHARED])dnl
--AC_REQUIRE([AC_ENABLE_STATIC])dnl
--AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--AC_REQUIRE([AC_PROG_RANLIB])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_PROG_LD])dnl
--AC_REQUIRE([AC_PROG_NM])dnl
--AC_REQUIRE([AC_PROG_LN_S])dnl
--dnl
--
--case "$target" in
--NONE) lt_target="$host" ;;
--*) lt_target="$target" ;;
--esac
--
--# Check for any special flags to pass to ltconfig.
--libtool_flags="--cache-file=$cache_file"
--test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
--test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
--test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
--test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
--test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
--ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
--[libtool_flags="$libtool_flags --enable-dlopen"])
--ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
--[libtool_flags="$libtool_flags --enable-win32-dll"])
--AC_ARG_ENABLE(libtool-lock,
-- [ --disable-libtool-lock avoid locking (might break parallel builds)])
--test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
--test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
--
--# Some flags need to be propagated to the compiler or linker for good
--# libtool support.
--case "$lt_target" in
--*-*-irix6*)
-- # Find out which ABI we are using.
-- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case "`/usr/bin/file conftest.o`" in
-- *32-bit*)
-- LD="${LD-ld} -32"
-- ;;
-- *N32*)
-- LD="${LD-ld} -n32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -64"
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--
--*-*-sco3.2v5*)
-- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-- SAVE_CFLAGS="$CFLAGS"
-- CFLAGS="$CFLAGS -belf"
-- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-- [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
-- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-- CFLAGS="$SAVE_CFLAGS"
-- fi
-- ;;
--
--ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
--[*-*-cygwin* | *-*-mingw*)
-- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-- AC_CHECK_TOOL(AS, as, false)
-- AC_CHECK_TOOL(OBJDUMP, objdump, false)
-- ;;
--])
--esac
--])
--
--# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
--AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
--
--# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
--AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
--
--# AC_ENABLE_SHARED - implement the --enable-shared flag
--# Usage: AC_ENABLE_SHARED[(DEFAULT)]
--# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
--# `yes'.
--AC_DEFUN(AC_ENABLE_SHARED, [dnl
--define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE(shared,
--changequote(<<, >>)dnl
--<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
--changequote([, ])dnl
--[p=${PACKAGE-default}
--case "$enableval" in
--yes) enable_shared=yes ;;
--no) enable_shared=no ;;
--*)
-- enable_shared=no
-- # Look at the argument we got. We use all the common list separators.
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-- for pkg in $enableval; do
-- if test "X$pkg" = "X$p"; then
-- enable_shared=yes
-- fi
-- done
-- IFS="$ac_save_ifs"
-- ;;
--esac],
--enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
--])
--
--# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
--AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_SHARED(no)])
--
--# AC_ENABLE_STATIC - implement the --enable-static flag
--# Usage: AC_ENABLE_STATIC[(DEFAULT)]
--# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
--# `yes'.
--AC_DEFUN(AC_ENABLE_STATIC, [dnl
--define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE(static,
--changequote(<<, >>)dnl
--<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
--changequote([, ])dnl
--[p=${PACKAGE-default}
--case "$enableval" in
--yes) enable_static=yes ;;
--no) enable_static=no ;;
--*)
-- enable_static=no
-- # Look at the argument we got. We use all the common list separators.
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-- for pkg in $enableval; do
-- if test "X$pkg" = "X$p"; then
-- enable_static=yes
-- fi
-- done
-- IFS="$ac_save_ifs"
-- ;;
--esac],
--enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
--])
--
--# AC_DISABLE_STATIC - set the default static flag to --disable-static
--AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_STATIC(no)])
--
--
--# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
--# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
--# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
--# `yes'.
--AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
--define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE(fast-install,
--changequote(<<, >>)dnl
--<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
--changequote([, ])dnl
--[p=${PACKAGE-default}
--case "$enableval" in
--yes) enable_fast_install=yes ;;
--no) enable_fast_install=no ;;
--*)
-- enable_fast_install=no
-- # Look at the argument we got. We use all the common list separators.
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-- for pkg in $enableval; do
-- if test "X$pkg" = "X$p"; then
-- enable_fast_install=yes
-- fi
-- done
-- IFS="$ac_save_ifs"
-- ;;
--esac],
--enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
--])
--
--# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
--AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_FAST_INSTALL(no)])
--
--# AC_PROG_LD - find the path to the GNU or non-GNU linker
--AC_DEFUN(AC_PROG_LD,
--[AC_ARG_WITH(gnu-ld,
--[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
--test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--ac_prog=ld
--if test "$ac_cv_prog_gcc" = yes; then
-- # Check if gcc -print-prog-name=ld gives a path.
-- AC_MSG_CHECKING([for ld used by GCC])
-- ac_prog=`($CC -print-prog-name=ld) 2>&5`
-- case "$ac_prog" in
-- # Accept absolute paths.
--changequote(,)dnl
-- [\\/]* | [A-Za-z]:[\\/]*)
-- re_direlt='/[^/][^/]*/\.\./'
--changequote([,])dnl
-- # Canonicalize the path of ld
-- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-- done
-- test -z "$LD" && LD="$ac_prog"
-- ;;
-- "")
-- # If it fails, then pretend we aren't using GCC.
-- ac_prog=ld
-- ;;
-- *)
-- # If it is relative, then search for the first ld in PATH.
-- with_gnu_ld=unknown
-- ;;
-- esac
--elif test "$with_gnu_ld" = yes; then
-- AC_MSG_CHECKING([for GNU ld])
--else
-- AC_MSG_CHECKING([for non-GNU ld])
--fi
--AC_CACHE_VAL(ac_cv_path_LD,
--[if test -z "$LD"; then
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-- for ac_dir in $PATH; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-- ac_cv_path_LD="$ac_dir/$ac_prog"
-- # Check to see if the program is GNU ld. I'd rather use --version,
-- # but apparently some GNU ld's only accept -v.
-- # Break only if it was the GNU/non-GNU ld that we prefer.
-- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-- test "$with_gnu_ld" != no && break
-- else
-- test "$with_gnu_ld" != yes && break
-- fi
-- fi
-- done
-- IFS="$ac_save_ifs"
--else
-- ac_cv_path_LD="$LD" # Let the user override the test with a path.
--fi])
--LD="$ac_cv_path_LD"
--if test -n "$LD"; then
-- AC_MSG_RESULT($LD)
--else
-- AC_MSG_RESULT(no)
--fi
--test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
--AC_PROG_LD_GNU
--])
--
--AC_DEFUN(AC_PROG_LD_GNU,
--[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
--[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
--if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-- ac_cv_prog_gnu_ld=yes
--else
-- ac_cv_prog_gnu_ld=no
--fi])
--])
--
--# AC_PROG_NM - find the path to a BSD-compatible name lister
--AC_DEFUN(AC_PROG_NM,
--[AC_MSG_CHECKING([for BSD-compatible nm])
--AC_CACHE_VAL(ac_cv_path_NM,
--[if test -n "$NM"; then
-- # Let the user override the test.
-- ac_cv_path_NM="$NM"
--else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
-- # Check to see if the nm accepts a BSD-compat flag.
-- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-- # nm: unknown option "B" ignored
-- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-- ac_cv_path_NM="$ac_dir/nm -B"
-- break
-- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-- ac_cv_path_NM="$ac_dir/nm -p"
-- break
-- else
-- ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
-- continue # so that we can try to find one that supports BSD flags
-- fi
-- fi
-- done
-- IFS="$ac_save_ifs"
-- test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
--fi])
--NM="$ac_cv_path_NM"
--AC_MSG_RESULT([$NM])
--])
--
--# AC_CHECK_LIBM - check for math library
--AC_DEFUN(AC_CHECK_LIBM,
--[AC_REQUIRE([AC_CANONICAL_HOST])dnl
--LIBM=
--case "$lt_target" in
--*-*-beos* | *-*-cygwin*)
-- # These system don't have libm
-- ;;
--*-ncr-sysv4.3*)
-- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-- AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-- ;;
--*)
-- AC_CHECK_LIB(m, main, LIBM="-lm")
-- ;;
--esac
--])
--
--# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
--# the libltdl convenience library, adds --enable-ltdl-convenience to
--# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
--# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
--# to be `${top_builddir}/libltdl'. Make sure you start DIR with
--# '${top_builddir}/' (note the single quotes!) if your package is not
--# flat, and, if you're not using automake, define top_builddir as
--# appropriate in the Makefiles.
--AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- case "$enable_ltdl_convenience" in
-- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-- "") enable_ltdl_convenience=yes
-- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-- esac
-- LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
-- INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
--])
--
--# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
--# the libltdl installable library, and adds --enable-ltdl-install to
--# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
--# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
--# to be `${top_builddir}/libltdl'. Make sure you start DIR with
--# '${top_builddir}/' (note the single quotes!) if your package is not
--# flat, and, if you're not using automake, define top_builddir as
--# appropriate in the Makefiles.
--# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
--AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- AC_CHECK_LIB(ltdl, main,
-- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-- [if test x"$enable_ltdl_install" = xno; then
-- AC_MSG_WARN([libltdl not installed, but installation disabled])
-- else
-- enable_ltdl_install=yes
-- fi
-- ])
-- if test x"$enable_ltdl_install" = x"yes"; then
-- ac_configure_args="$ac_configure_args --enable-ltdl-install"
-- LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
-- INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
-- else
-- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-- LIBLTDL="-lltdl"
-- INCLTDL=
-- fi
--])
--
--dnl old names
--AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
--AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
--AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
--AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
--AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
--AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
--AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
--
--dnl This is just to silence aclocal about the macro not being used
--ifelse([AC_DISABLE_FAST_INSTALL])dnl
--
--# Macro to add for using GNU gettext.
--# Ulrich Drepper <drepper@cygnus.com>, 1995.
--#
--# Modified to never use included libintl.
--# Owen Taylor <otaylor@redhat.com>, 12/15/1998
--#
--#
--# This file can be copied and used freely without restrictions. It can
--# be used in projects which are not available under the GNU Public License
--# but which still want to provide support for the GNU gettext functionality.
--# Please note that the actual code is *not* freely available.
--
--# serial 5
--
- AC_DEFUN(AM_GTK_WITH_NLS,
- [AC_MSG_CHECKING([whether NLS is requested])
- dnl Default is enabled NLS
diff --git a/package/libgtk12/libgtk12.mk b/package/libgtk12/libgtk12.mk
deleted file mode 100644
index 63aac1a..0000000
--- a/package/libgtk12/libgtk12.mk
+++ /dev/null
@@ -1,105 +0,0 @@
-#############################################################
-#
-# libgtk1.2
-#
-#############################################################
-LIBGTK12_VERSION:=1.2.10
-LIBGTK12_SOURCE:=gtk+-$(LIBGTK12_VERSION).tar.gz
-LIBGTK12_SITE:=http://ftp.gnome.org/pub/gnome/sources/gtk+/1.2
-LIBGTK12_CAT:=$(ZCAT)
-LIBGTK12_DIR:=$(BUILD_DIR)/gtk+-$(LIBGTK12_VERSION)
-LIBGTK12_BINARY:=libgtk.a
-
-
-$(DL_DIR)/$(LIBGTK12_SOURCE):
- $(call DOWNLOAD,$(LIBGTK12_SITE),$(LIBGTK12_SOURCE))
-
-libgtk12-source: $(DL_DIR)/$(LIBGTK12_SOURCE)
-
-$(LIBGTK12_DIR)/.unpacked: $(DL_DIR)/$(LIBGTK12_SOURCE)
- $(LIBGTK12_CAT) $(DL_DIR)/$(LIBGTK12_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
- toolchain/patch-kernel.sh $(LIBGTK12_DIR) package/libgtk12/ \*.patch*
- $(CONFIG_UPDATE) $(LIBGTK12_DIR)
- touch $(LIBGTK12_DIR)/.unpacked
-
-$(LIBGTK12_DIR)/.configured: $(LIBGTK12_DIR)/.unpacked
- (cd $(LIBGTK12_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- $(TARGET_CONFIGURE_ARGS) \
- GLIB_CONFIG=$(STAGING_DIR)/bin/glib-config \
- ./configure $(QUIET) \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libdir=/lib \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --includedir=/usr/include \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- --x-includes=$(STAGING_DIR)/usr/include/X11 \
- --x-libraries=$(STAGING_DIR)/usr/lib \
- --enable-debug=no \
- --disable-glibtest \
- --disable-xim \
- --enable-shared \
- )
- touch $(LIBGTK12_DIR)/.configured
-
-$(LIBGTK12_DIR)/gtk/.libs/$(LIBGTK12_BINARY): $(LIBGTK12_DIR)/.configured
- $(MAKE) CC="$(TARGET_CC)" -C $(LIBGTK12_DIR)
- touch -c $(LIBGTK12_DIR)/gtk/.libs/$(LIBGTK12_BINARY)
-
-$(STAGING_DIR)/lib/$(LIBGTK12_BINARY): $(LIBGTK12_DIR)/gtk/.libs/$(LIBGTK12_BINARY)
- $(MAKE) prefix=$(STAGING_DIR) \
- exec_prefix=$(STAGING_DIR) \
- bindir=$(STAGING_DIR)/bin \
- sbindir=$(STAGING_DIR)/sbin \
- libexecdir=$(STAGING_DIR)/bin \
- datadir=$(STAGING_DIR)/share \
- sysconfdir=$(STAGING_DIR)/etc \
- sharedstatedir=$(STAGING_DIR)/com \
- localstatedir=$(STAGING_DIR)/var \
- libdir=$(STAGING_DIR)/lib \
- includedir=$(STAGING_DIR)/usr/include \
- oldincludedir=$(STAGING_DIR)/include \
- infodir=$(STAGING_DIR)/info \
- mandir=$(STAGING_DIR)/man \
- -C $(LIBGTK12_DIR) install
- touch -c $(STAGING_DIR)/lib/$(LIBGTK12_BINARY)
-
-$(TARGET_DIR)/lib/libgtk-1.2.so.0.9.1: $(STAGING_DIR)/lib/$(LIBGTK12_BINARY)
- cp -a $(STAGING_DIR)/lib/libgtk.so $(TARGET_DIR)/lib/
- cp -a $(STAGING_DIR)/lib/libgtk-1.2.so.0 $(TARGET_DIR)/lib/
- cp -a $(STAGING_DIR)/lib/libgtk-1.2.so.0.9.1 $(TARGET_DIR)/lib/
- cp -a $(STAGING_DIR)/lib/libgdk.so $(TARGET_DIR)/lib/
- cp -a $(STAGING_DIR)/lib/libgdk-1.2.so.0 $(TARGET_DIR)/lib/
- cp -a $(STAGING_DIR)/lib/libgdk-1.2.so.0.9.1 $(TARGET_DIR)/lib/
- $(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $(TARGET_DIR)/lib/libgtk-1.2.so.0.9.1
- $(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $(TARGET_DIR)/lib/libgdk-1.2.so.0.9.1
- touch -c $(TARGET_DIR)/lib/libgtk-1.2.so.0.9.1
-
-libgtk12: libglib12 xserver_xorg-server $(TARGET_DIR)/lib/libgtk-1.2.so.0.9.1
-
-libgtk12-clean:
- rm -f $(TARGET_DIR)/lib/libgtk* $(TARGET_DIR)/lib/libgdk*
- -$(MAKE) -C $(LIBGTK12_DIR) clean
-
-libgtk12-dirclean:
- rm -rf $(LIBGTK12_DIR)
-
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_PACKAGE_LIBGTK12),y)
-TARGETS+=libgtk12
-endif
diff --git a/package/libgtk12/no-xwc.patch b/package/libgtk12/no-xwc.patch
deleted file mode 100644
index e26bba8..0000000
--- a/package/libgtk12/no-xwc.patch
+++ /dev/null
@@ -1,267 +0,0 @@
-remove mb and XWC support, as tinyx doesnt support this
-
-#
-# Patch managed by http://www.holgerschurig.de/patcher.html
-#
-
---- gtk+-1.2.10/gdk/gdkdraw.c~no-xwc
-+++ gtk+-1.2.10/gdk/gdkdraw.c
-@@ -236,12 +236,14 @@
- strlen (string) / 2);
- }
- }
-+#ifdef HAVE_XWC
- else if (font->type == GDK_FONT_FONTSET)
- {
- XFontSet fontset = (XFontSet) font_private->xfont;
- XmbDrawString (drawable_private->xdisplay, drawable_private->xwindow,
- fontset, gc_private->xgc, x, y, string, strlen (string));
- }
-+#endif
- else
- g_error("undefined font type\n");
- }
-@@ -291,12 +293,14 @@
- gc_private->xgc, x, y, (XChar2b *) text, text_length / 2);
- }
- }
-+#ifdef HAVE_XWC
- else if (font->type == GDK_FONT_FONTSET)
- {
- XFontSet fontset = (XFontSet) font_private->xfont;
- XmbDrawString (drawable_private->xdisplay, drawable_private->xwindow,
- fontset, gc_private->xgc, x, y, text, text_length);
- }
-+#endif
- else
- g_error("undefined font type\n");
- }
-@@ -337,6 +341,7 @@
- g_free (glyphs);
- }
- }
-+#ifdef HAVE_XWC
- else if (font->type == GDK_FONT_FONTSET)
- {
- if (sizeof(GdkWChar) == sizeof(wchar_t))
-@@ -357,6 +362,7 @@
- g_free (text_wchar);
- }
- }
-+#endif
- else
- g_error("undefined font type\n");
- }
---- gtk+-1.2.10/gdk/gdkim.c~no-xwc
-+++ gtk+-1.2.10/gdk/gdkim.c
-@@ -121,6 +121,7 @@
-
- current_locale = setlocale (LC_ALL, NULL);
-
-+#ifdef HAVE_XWC
- if ((strcmp (current_locale, "C")) && (strcmp (current_locale, "POSIX")))
- {
- gdk_use_mb = TRUE;
-@@ -145,7 +146,8 @@
- GDK_NOTE (XIM,
- g_message ("%s multi-byte string functions.",
- gdk_use_mb ? "Using" : "Not using"));
--
-+#endif
-+
- return current_locale;
- }
-
-@@ -1551,6 +1553,7 @@
- else
- length = len;
-
-+#ifdef HAVE_XWC
- if (gdk_use_mb)
- {
- XTextProperty tpr;
-@@ -1589,6 +1592,7 @@
- g_free (src_wc);
- }
- else
-+#endif
- {
- gint i;
-
-@@ -1644,6 +1648,7 @@
- /* NoMem or LocaleNotSupp */
- return -1;
- }
-+#ifdef HAVE_XWC
- if (XwcTextPropertyToTextList (gdk_display, &tpr, &wstrs, &num_wstrs)
- != Success)
- {
-@@ -1659,6 +1664,7 @@
- dest[len_cpy] = wstr_src[len_cpy];
- XwcFreeStringList (wstrs);
- return len_cpy;
-+#endif
- }
- else
- {
---- gtk+-1.2.10/gdk/gdkfont.c~no-xwc
-+++ gtk+-1.2.10/gdk/gdkfont.c
-@@ -244,9 +244,11 @@
- gdk_xid_table_remove (((XFontStruct *) private->xfont)->fid);
- XFreeFont (private->xdisplay, (XFontStruct *) private->xfont);
- break;
-+#ifdef HAVE_XWC
- case GDK_FONT_FONTSET:
- XFreeFontSet (private->xdisplay, (XFontSet) private->xfont);
- break;
-+#endif
- default:
- g_error ("unknown font type.");
- break;
-@@ -292,6 +294,7 @@
- return (((XFontStruct *) privatea->xfont)->fid ==
- ((XFontStruct *) privateb->xfont)->fid);
- }
-+#ifdef HAVE_XWC
- else if (fonta->type == GDK_FONT_FONTSET && fontb->type == GDK_FONT_FONTSET)
- {
- gchar *namea, *nameb;
-@@ -301,6 +304,7 @@
-
- return (strcmp(namea, nameb) == 0);
- }
-+#endif
- else
- /* fontset != font */
- return FALSE;
-@@ -333,10 +337,12 @@
- width = XTextWidth16 (xfont, (XChar2b *) string, strlen (string) / 2);
- }
- break;
-+#ifdef HAVE_XWC
- case GDK_FONT_FONTSET:
- fontset = (XFontSet) font_private->xfont;
- width = XmbTextEscapement (fontset, string, strlen(string));
- break;
-+#endif
- default:
- width = 0;
- }
-@@ -372,10 +378,12 @@
- width = XTextWidth16 (xfont, (XChar2b *) text, text_length / 2);
- }
- break;
-+#ifdef HAVE_XWC
- case GDK_FONT_FONTSET:
- fontset = (XFontSet) private->xfont;
- width = XmbTextEscapement (fontset, text, text_length);
- break;
-+#endif
- default:
- width = 0;
- }
-@@ -414,6 +422,7 @@
-
- break;
- }
-+#ifdef HAVE_XWC
- case GDK_FONT_FONTSET:
- if (sizeof(GdkWChar) == sizeof(wchar_t))
- {
-@@ -431,6 +440,7 @@
- g_free (text_wchar);
- }
- break;
-+#endif
- default:
- width = 0;
- }
-@@ -474,10 +484,12 @@
- width = XTextWidth (xfont, &character, 1);
- }
- break;
-+#ifdef HAVE_XWC
- case GDK_FONT_FONTSET:
- fontset = (XFontSet) private->xfont;
- width = XmbTextEscapement (fontset, &character, 1) ;
- break;
-+#endif
- default:
- width = 0;
- }
-@@ -523,6 +535,7 @@
-
- break;
- }
-+#ifdef HAVE_XWC
- case GDK_FONT_FONTSET:
- fontset = (XFontSet) private->xfont;
- {
-@@ -530,6 +543,7 @@
- width = XwcTextEscapement (fontset, &char_wc, 1) ;
- }
- break;
-+#endif
- default:
- width = 0;
- }
-@@ -597,6 +611,7 @@
- if (descent)
- *descent = overall.descent;
- break;
-+#ifdef HAVE_XWC
- case GDK_FONT_FONTSET:
- fontset = (XFontSet) private->xfont;
- XmbTextExtents (fontset, text, text_length, &ink, &logical);
-@@ -611,6 +626,7 @@
- if (descent)
- *descent = ink.y + ink.height;
- break;
-+#endif
- }
-
- }
-@@ -664,6 +680,7 @@
-
- break;
- }
-+#ifdef HAVE_XWC
- case GDK_FONT_FONTSET:
- fontset = (XFontSet) private->xfont;
-
-@@ -691,6 +708,7 @@
- if (descent)
- *descent = ink.y + ink.height;
- break;
-+#endif
- }
-
- }
-@@ -750,11 +768,13 @@
- }
- width = overall.rbearing;
- break;
-+#ifdef HAVE_XWC
- case GDK_FONT_FONTSET:
- fontset = (XFontSet) private->xfont;
- XmbTextExtents (fontset, text, text_length, &ink, &log);
- width = ink.x + ink.width;
- break;
-+#endif
- default:
- width = 0;
- }
-@@ -818,11 +838,13 @@
- }
- height = overall.ascent + overall.descent;
- break;
-+#ifdef HAVE_XWC
- case GDK_FONT_FONTSET:
- fontset = (XFontSet) private->xfont;
- XmbTextExtents (fontset, text, text_length, &ink, &log);
- height = log.height;
- break;
-+#endif
- default:
- height = 0;
- }
diff --git a/package/libgtk12/timezone-fix.patch b/package/libgtk12/timezone-fix.patch
deleted file mode 100644
index 1568414..0000000
--- a/package/libgtk12/timezone-fix.patch
+++ /dev/null
@@ -1,15 +0,0 @@
-diff -NurBabdH gtk+-1.2.10/gtk/testrgb.c gtk+-1.2.10-timezone-fix/gtk/testrgb.c
---- gtk+-1.2.10/gtk/testrgb.c 2000-08-18 23:36:34.000000000 +0200
-+++ gtk+-1.2.10-timezone-fix/gtk/testrgb.c 2005-03-03 11:18:09.000000000 +0100
-@@ -49,7 +49,10 @@
- get_time (void)
- {
- struct timeval tv;
-- struct timezone tz;
-+ struct timezone {
-+ int tz_minuteswest; /* minutes W of Greenwich */
-+ int tz_dsttime; /* type of dst correction */
-+ } tz;
-
- gettimeofday (&tv, &tz);
-
diff --git a/package/libgtk12/update-libtool.patch b/package/libgtk12/update-libtool.patch
deleted file mode 100644
index f710e28..0000000
--- a/package/libgtk12/update-libtool.patch
+++ /dev/null
@@ -1,50327 +0,0 @@
-diff -urN gtk+-1.2.10.orig/Makefile.in gtk+-1.2.10/Makefile.in
---- gtk+-1.2.10.orig/Makefile.in 2001-04-01 21:14:07.000000000 -0600
-+++ gtk+-1.2.10/Makefile.in 2006-07-09 02:29:45.000000000 -0600
-@@ -1,6 +1,6 @@
--# Makefile.in generated automatically by automake 1.4 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
--# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
- # gives unlimited permission to copy and/or distribute it,
- # with or without modifications, as long as this notice is preserved.
-@@ -59,13 +59,22 @@
- POST_UNINSTALL = :
- host_alias = @host_alias@
- host_triplet = @host@
-+AR = @AR@
- AS = @AS@
- AWK = @AWK@
- CATALOGS = @CATALOGS@
- CATOBJEXT = @CATOBJEXT@
- CC = @CC@
-+CXX = @CXX@
-+CXXCPP = @CXXCPP@
- DATADIRNAME = @DATADIRNAME@
- DLLTOOL = @DLLTOOL@
-+ECHO = @ECHO@
-+EGREP = @EGREP@
-+EXEEXT = @EXEEXT@
-+F77 = @F77@
-+GCJ = @GCJ@
-+GCJFLAGS = @GCJFLAGS@
- GDK_WLIBS = @GDK_WLIBS@
- GENCAT = @GENCAT@
- GLIB_CFLAGS = @GLIB_CFLAGS@
-@@ -85,14 +94,17 @@
- GTK_XIM_FLAGS = @GTK_XIM_FLAGS@
- GT_NO = @GT_NO@
- GT_YES = @GT_YES@
-+HAVE_LIB = @HAVE_LIB@
- INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
- INDENT = @INDENT@
- INSTOBJEXT = @INSTOBJEXT@
- INTLDEPS = @INTLDEPS@
- INTLLIBS = @INTLLIBS@
- INTLOBJS = @INTLOBJS@
-+LIB = @LIB@
- LIBTOOL = @LIBTOOL@
- LN_S = @LN_S@
-+LTLIB = @LTLIB@
- LT_AGE = @LT_AGE@
- LT_CURRENT = @LT_CURRENT@
- LT_RELEASE = @LT_RELEASE@
-@@ -101,12 +113,16 @@
- MAKEINFO = @MAKEINFO@
- MKINSTALLDIRS = @MKINSTALLDIRS@
- OBJDUMP = @OBJDUMP@
-+OBJEXT = @OBJEXT@
- PACKAGE = @PACKAGE@
- PERL = @PERL@
-+PKG_CONFIG = @PKG_CONFIG@
- POFILES = @POFILES@
- POSUB = @POSUB@
- RANLIB = @RANLIB@
-+RC = @RC@
- REBUILD = @REBUILD@
-+STRIP = @STRIP@
- STRIP_BEGIN = @STRIP_BEGIN@
- STRIP_DUMMY = @STRIP_DUMMY@
- STRIP_END = @STRIP_END@
-@@ -158,14 +174,14 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
- all: all-redirect
- .SUFFIXES:
- $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -306,7 +322,7 @@
- dot_seen=no; \
- rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
- rev="$$subdir $$rev"; \
-- test "$$subdir" = "." && dot_seen=yes; \
-+ test "$$subdir" != "." || dot_seen=yes; \
- done; \
- test "$$dot_seen" = "no" && rev=". $$rev"; \
- target=`echo $@ | sed s/-recursive//`; \
-@@ -348,7 +364,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -397,6 +413,11 @@
- -rm -rf $(distdir)
- mkdir $(distdir)
- -chmod 777 $(distdir)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile
- $(mkinstalldirs) $(distdir)/examples $(distdir)/examples/aspectframe \
- $(distdir)/examples/base $(distdir)/examples/buttons \
- $(distdir)/examples/calendar $(distdir)/examples/clist \
-diff -urN gtk+-1.2.10.orig/acinclude.m4 gtk+-1.2.10/acinclude.m4
---- gtk+-1.2.10.orig/acinclude.m4 2006-07-09 02:29:43.000000000 -0600
-+++ gtk+-1.2.10/acinclude.m4 2006-07-09 02:29:43.000000000 -0600
-@@ -248,7 +248,7 @@
- AC_DEFINE(HAVE_STPCPY)
- fi
-
-- AM_LC_MESSAGES
-+
- AM_GTK_WITH_NLS
-
- if test "x$CATOBJEXT" != "x"; then
-diff -urN gtk+-1.2.10.orig/aclocal.m4 gtk+-1.2.10/aclocal.m4
---- gtk+-1.2.10.orig/aclocal.m4 2001-03-28 14:11:43.000000000 -0700
-+++ gtk+-1.2.10/aclocal.m4 2006-07-09 02:29:45.000000000 -0600
-@@ -1,6 +1,6 @@
--dnl aclocal.m4 generated automatically by aclocal 1.4
-+dnl aclocal.m4 generated automatically by aclocal 1.4-p6
-
--dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-+dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- dnl This file is free software; the Free Software Foundation
- dnl gives unlimited permission to copy and/or distribute it,
- dnl with or without modifications, as long as this notice is preserved.
-@@ -11,428 +11,6 @@
- dnl PARTICULAR PURPOSE.
-
-
--# serial 40 AC_PROG_LIBTOOL
--AC_DEFUN(AC_PROG_LIBTOOL,
--[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
--
--# Save cache, so that ltconfig can load it
--AC_CACHE_SAVE
--
--# Actually configure libtool. ac_aux_dir is where install-sh is found.
--CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
--LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
--LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
--DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
--${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
--$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
--|| AC_MSG_ERROR([libtool configure failed])
--
--# Reload cache, that may have been modified by ltconfig
--AC_CACHE_LOAD
--
--# This can be used to rebuild libtool when needed
--LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
--
--# Always use our own libtool.
--LIBTOOL='$(SHELL) $(top_builddir)/libtool'
--AC_SUBST(LIBTOOL)dnl
--
--# Redirect the config.log output again, so that the ltconfig log is not
--# clobbered by the next message.
--exec 5>>./config.log
--])
--
--AC_DEFUN(AC_LIBTOOL_SETUP,
--[AC_PREREQ(2.13)dnl
--AC_REQUIRE([AC_ENABLE_SHARED])dnl
--AC_REQUIRE([AC_ENABLE_STATIC])dnl
--AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--AC_REQUIRE([AC_PROG_RANLIB])dnl
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_PROG_LD])dnl
--AC_REQUIRE([AC_PROG_NM])dnl
--AC_REQUIRE([AC_PROG_LN_S])dnl
--dnl
--
--case "$target" in
--NONE) lt_target="$host" ;;
--*) lt_target="$target" ;;
--esac
--
--# Check for any special flags to pass to ltconfig.
--libtool_flags="--cache-file=$cache_file"
--test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
--test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
--test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
--test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
--test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
--ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
--[libtool_flags="$libtool_flags --enable-dlopen"])
--ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
--[libtool_flags="$libtool_flags --enable-win32-dll"])
--AC_ARG_ENABLE(libtool-lock,
-- [ --disable-libtool-lock avoid locking (might break parallel builds)])
--test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
--test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
--
--# Some flags need to be propagated to the compiler or linker for good
--# libtool support.
--case "$lt_target" in
--*-*-irix6*)
-- # Find out which ABI we are using.
-- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-- if AC_TRY_EVAL(ac_compile); then
-- case "`/usr/bin/file conftest.o`" in
-- *32-bit*)
-- LD="${LD-ld} -32"
-- ;;
-- *N32*)
-- LD="${LD-ld} -n32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -64"
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
--
--*-*-sco3.2v5*)
-- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-- SAVE_CFLAGS="$CFLAGS"
-- CFLAGS="$CFLAGS -belf"
-- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-- [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
-- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-- CFLAGS="$SAVE_CFLAGS"
-- fi
-- ;;
--
--ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
--[*-*-cygwin* | *-*-mingw*)
-- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-- AC_CHECK_TOOL(AS, as, false)
-- AC_CHECK_TOOL(OBJDUMP, objdump, false)
-- ;;
--])
--esac
--])
--
--# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
--AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
--
--# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
--AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
--
--# AC_ENABLE_SHARED - implement the --enable-shared flag
--# Usage: AC_ENABLE_SHARED[(DEFAULT)]
--# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
--# `yes'.
--AC_DEFUN(AC_ENABLE_SHARED, [dnl
--define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE(shared,
--changequote(<<, >>)dnl
--<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
--changequote([, ])dnl
--[p=${PACKAGE-default}
--case "$enableval" in
--yes) enable_shared=yes ;;
--no) enable_shared=no ;;
--*)
-- enable_shared=no
-- # Look at the argument we got. We use all the common list separators.
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-- for pkg in $enableval; do
-- if test "X$pkg" = "X$p"; then
-- enable_shared=yes
-- fi
-- done
-- IFS="$ac_save_ifs"
-- ;;
--esac],
--enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
--])
--
--# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
--AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_SHARED(no)])
--
--# AC_ENABLE_STATIC - implement the --enable-static flag
--# Usage: AC_ENABLE_STATIC[(DEFAULT)]
--# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
--# `yes'.
--AC_DEFUN(AC_ENABLE_STATIC, [dnl
--define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE(static,
--changequote(<<, >>)dnl
--<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
--changequote([, ])dnl
--[p=${PACKAGE-default}
--case "$enableval" in
--yes) enable_static=yes ;;
--no) enable_static=no ;;
--*)
-- enable_static=no
-- # Look at the argument we got. We use all the common list separators.
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-- for pkg in $enableval; do
-- if test "X$pkg" = "X$p"; then
-- enable_static=yes
-- fi
-- done
-- IFS="$ac_save_ifs"
-- ;;
--esac],
--enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
--])
--
--# AC_DISABLE_STATIC - set the default static flag to --disable-static
--AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_STATIC(no)])
--
--
--# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
--# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
--# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
--# `yes'.
--AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
--define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
--AC_ARG_ENABLE(fast-install,
--changequote(<<, >>)dnl
--<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
--changequote([, ])dnl
--[p=${PACKAGE-default}
--case "$enableval" in
--yes) enable_fast_install=yes ;;
--no) enable_fast_install=no ;;
--*)
-- enable_fast_install=no
-- # Look at the argument we got. We use all the common list separators.
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-- for pkg in $enableval; do
-- if test "X$pkg" = "X$p"; then
-- enable_fast_install=yes
-- fi
-- done
-- IFS="$ac_save_ifs"
-- ;;
--esac],
--enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
--])
--
--# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
--AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
--AC_ENABLE_FAST_INSTALL(no)])
--
--# AC_PROG_LD - find the path to the GNU or non-GNU linker
--AC_DEFUN(AC_PROG_LD,
--[AC_ARG_WITH(gnu-ld,
--[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
--test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
--AC_REQUIRE([AC_PROG_CC])dnl
--AC_REQUIRE([AC_CANONICAL_HOST])dnl
--AC_REQUIRE([AC_CANONICAL_BUILD])dnl
--ac_prog=ld
--if test "$ac_cv_prog_gcc" = yes; then
-- # Check if gcc -print-prog-name=ld gives a path.
-- AC_MSG_CHECKING([for ld used by GCC])
-- ac_prog=`($CC -print-prog-name=ld) 2>&5`
-- case "$ac_prog" in
-- # Accept absolute paths.
--changequote(,)dnl
-- [\\/]* | [A-Za-z]:[\\/]*)
-- re_direlt='/[^/][^/]*/\.\./'
--changequote([,])dnl
-- # Canonicalize the path of ld
-- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-- done
-- test -z "$LD" && LD="$ac_prog"
-- ;;
-- "")
-- # If it fails, then pretend we aren't using GCC.
-- ac_prog=ld
-- ;;
-- *)
-- # If it is relative, then search for the first ld in PATH.
-- with_gnu_ld=unknown
-- ;;
-- esac
--elif test "$with_gnu_ld" = yes; then
-- AC_MSG_CHECKING([for GNU ld])
--else
-- AC_MSG_CHECKING([for non-GNU ld])
--fi
--AC_CACHE_VAL(ac_cv_path_LD,
--[if test -z "$LD"; then
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-- for ac_dir in $PATH; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-- ac_cv_path_LD="$ac_dir/$ac_prog"
-- # Check to see if the program is GNU ld. I'd rather use --version,
-- # but apparently some GNU ld's only accept -v.
-- # Break only if it was the GNU/non-GNU ld that we prefer.
-- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-- test "$with_gnu_ld" != no && break
-- else
-- test "$with_gnu_ld" != yes && break
-- fi
-- fi
-- done
-- IFS="$ac_save_ifs"
--else
-- ac_cv_path_LD="$LD" # Let the user override the test with a path.
--fi])
--LD="$ac_cv_path_LD"
--if test -n "$LD"; then
-- AC_MSG_RESULT($LD)
--else
-- AC_MSG_RESULT(no)
--fi
--test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
--AC_PROG_LD_GNU
--])
--
--AC_DEFUN(AC_PROG_LD_GNU,
--[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
--[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
--if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-- ac_cv_prog_gnu_ld=yes
--else
-- ac_cv_prog_gnu_ld=no
--fi])
--])
--
--# AC_PROG_NM - find the path to a BSD-compatible name lister
--AC_DEFUN(AC_PROG_NM,
--[AC_MSG_CHECKING([for BSD-compatible nm])
--AC_CACHE_VAL(ac_cv_path_NM,
--[if test -n "$NM"; then
-- # Let the user override the test.
-- ac_cv_path_NM="$NM"
--else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
-- # Check to see if the nm accepts a BSD-compat flag.
-- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-- # nm: unknown option "B" ignored
-- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-- ac_cv_path_NM="$ac_dir/nm -B"
-- break
-- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-- ac_cv_path_NM="$ac_dir/nm -p"
-- break
-- else
-- ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
-- continue # so that we can try to find one that supports BSD flags
-- fi
-- fi
-- done
-- IFS="$ac_save_ifs"
-- test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
--fi])
--NM="$ac_cv_path_NM"
--AC_MSG_RESULT([$NM])
--])
--
--# AC_CHECK_LIBM - check for math library
--AC_DEFUN(AC_CHECK_LIBM,
--[AC_REQUIRE([AC_CANONICAL_HOST])dnl
--LIBM=
--case "$lt_target" in
--*-*-beos* | *-*-cygwin*)
-- # These system don't have libm
-- ;;
--*-ncr-sysv4.3*)
-- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-- AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-- ;;
--*)
-- AC_CHECK_LIB(m, main, LIBM="-lm")
-- ;;
--esac
--])
--
--# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
--# the libltdl convenience library, adds --enable-ltdl-convenience to
--# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
--# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
--# to be `${top_builddir}/libltdl'. Make sure you start DIR with
--# '${top_builddir}/' (note the single quotes!) if your package is not
--# flat, and, if you're not using automake, define top_builddir as
--# appropriate in the Makefiles.
--AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- case "$enable_ltdl_convenience" in
-- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-- "") enable_ltdl_convenience=yes
-- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-- esac
-- LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
-- INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
--])
--
--# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
--# the libltdl installable library, and adds --enable-ltdl-install to
--# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
--# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
--# to be `${top_builddir}/libltdl'. Make sure you start DIR with
--# '${top_builddir}/' (note the single quotes!) if your package is not
--# flat, and, if you're not using automake, define top_builddir as
--# appropriate in the Makefiles.
--# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
--AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-- AC_CHECK_LIB(ltdl, main,
-- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-- [if test x"$enable_ltdl_install" = xno; then
-- AC_MSG_WARN([libltdl not installed, but installation disabled])
-- else
-- enable_ltdl_install=yes
-- fi
-- ])
-- if test x"$enable_ltdl_install" = x"yes"; then
-- ac_configure_args="$ac_configure_args --enable-ltdl-install"
-- LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
-- INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
-- else
-- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-- LIBLTDL="-lltdl"
-- INCLTDL=
-- fi
--])
--
--dnl old names
--AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
--AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
--AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
--AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
--AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
--AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
--AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
--
--dnl This is just to silence aclocal about the macro not being used
--ifelse([AC_DISABLE_FAST_INSTALL])dnl
--
--# Macro to add for using GNU gettext.
--# Ulrich Drepper <drepper@cygnus.com>, 1995.
--#
--# Modified to never use included libintl.
--# Owen Taylor <otaylor@redhat.com>, 12/15/1998
--#
--#
--# This file can be copied and used freely without restrictions. It can
--# be used in projects which are not available under the GNU Public License
--# but which still want to provide support for the GNU gettext functionality.
--# Please note that the actual code is *not* freely available.
--
--# serial 5
--
- AC_DEFUN(AM_GTK_WITH_NLS,
- [AC_MSG_CHECKING([whether NLS is requested])
- dnl Default is enabled NLS
-@@ -660,7 +238,7 @@
- AC_DEFINE(HAVE_STPCPY)
- fi
-
-- AM_LC_MESSAGES
-+
- AM_GTK_WITH_NLS
-
- if test "x$CATOBJEXT" != "x"; then
-@@ -723,229 +301,7533 @@
- AC_SUBST(GT_NO)
- AC_SUBST(GT_YES)
-
-- dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
-- dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
-- dnl Try to locate is.
-- MKINSTALLDIRS=
-- if test -n "$ac_aux_dir"; then
-- MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
-- fi
-- if test -z "$MKINSTALLDIRS"; then
-- MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
-- fi
-- AC_SUBST(MKINSTALLDIRS)
-+ dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
-+ dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
-+ dnl Try to locate is.
-+ MKINSTALLDIRS=
-+ if test -n "$ac_aux_dir"; then
-+ MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
-+ fi
-+ if test -z "$MKINSTALLDIRS"; then
-+ MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
-+ fi
-+ AC_SUBST(MKINSTALLDIRS)
-+
-+ dnl *** For now the libtool support in intl/Makefile is not for real.
-+ l=
-+ AC_SUBST(l)
-+
-+ dnl Generate list of files to be processed by xgettext which will
-+ dnl be included in po/Makefile.
-+ test -d po || mkdir po
-+ if test "x$srcdir" != "x."; then
-+ if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
-+ posrcprefix="$srcdir/"
-+ else
-+ posrcprefix="../$srcdir/"
-+ fi
-+ else
-+ posrcprefix="../"
-+ fi
-+ rm -f po/POTFILES
-+ sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
-+ < $srcdir/po/POTFILES.in > po/POTFILES
-+ ])
-+
-+
-+# lib-prefix.m4 serial 4 (gettext-0.14.2)
-+dnl Copyright (C) 2001-2005 Free Software Foundation, Inc.
-+dnl This file is free software; the Free Software Foundation
-+dnl gives unlimited permission to copy and/or distribute it,
-+dnl with or without modifications, as long as this notice is preserved.
-+
-+dnl From Bruno Haible.
-+
-+dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
-+dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
-+dnl require excessive bracketing.
-+ifdef([AC_HELP_STRING],
-+[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
-+[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
-+
-+dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
-+dnl to access previously installed libraries. The basic assumption is that
-+dnl a user will want packages to use other packages he previously installed
-+dnl with the same --prefix option.
-+dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
-+dnl libraries, but is otherwise very convenient.
-+AC_DEFUN([AC_LIB_PREFIX],
-+[
-+ AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
-+ AC_REQUIRE([AC_PROG_CC])
-+ AC_REQUIRE([AC_CANONICAL_HOST])
-+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
-+ dnl By default, look in $includedir and $libdir.
-+ use_additional=yes
-+ AC_LIB_WITH_FINAL_PREFIX([
-+ eval additional_includedir=\"$includedir\"
-+ eval additional_libdir=\"$libdir\"
-+ ])
-+ AC_LIB_ARG_WITH([lib-prefix],
-+[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
-+ --without-lib-prefix don't search for libraries in includedir and libdir],
-+[
-+ if test "X$withval" = "Xno"; then
-+ use_additional=no
-+ else
-+ if test "X$withval" = "X"; then
-+ AC_LIB_WITH_FINAL_PREFIX([
-+ eval additional_includedir=\"$includedir\"
-+ eval additional_libdir=\"$libdir\"
-+ ])
-+ else
-+ additional_includedir="$withval/include"
-+ additional_libdir="$withval/lib"
-+ fi
-+ fi
-+])
-+ if test $use_additional = yes; then
-+ dnl Potentially add $additional_includedir to $CPPFLAGS.
-+ dnl But don't add it
-+ dnl 1. if it's the standard /usr/include,
-+ dnl 2. if it's already present in $CPPFLAGS,
-+ dnl 3. if it's /usr/local/include and we are using GCC on Linux,
-+ dnl 4. if it doesn't exist as a directory.
-+ if test "X$additional_includedir" != "X/usr/include"; then
-+ haveit=
-+ for x in $CPPFLAGS; do
-+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-+ if test "X$x" = "X-I$additional_includedir"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ if test "X$additional_includedir" = "X/usr/local/include"; then
-+ if test -n "$GCC"; then
-+ case $host_os in
-+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
-+ esac
-+ fi
-+ fi
-+ if test -z "$haveit"; then
-+ if test -d "$additional_includedir"; then
-+ dnl Really add $additional_includedir to $CPPFLAGS.
-+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
-+ fi
-+ fi
-+ fi
-+ fi
-+ dnl Potentially add $additional_libdir to $LDFLAGS.
-+ dnl But don't add it
-+ dnl 1. if it's the standard /usr/lib,
-+ dnl 2. if it's already present in $LDFLAGS,
-+ dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
-+ dnl 4. if it doesn't exist as a directory.
-+ if test "X$additional_libdir" != "X/usr/lib"; then
-+ haveit=
-+ for x in $LDFLAGS; do
-+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-+ if test "X$x" = "X-L$additional_libdir"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ if test "X$additional_libdir" = "X/usr/local/lib"; then
-+ if test -n "$GCC"; then
-+ case $host_os in
-+ linux*) haveit=yes;;
-+ esac
-+ fi
-+ fi
-+ if test -z "$haveit"; then
-+ if test -d "$additional_libdir"; then
-+ dnl Really add $additional_libdir to $LDFLAGS.
-+ LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
-+ fi
-+ fi
-+ fi
-+ fi
-+ fi
-+])
-+
-+dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
-+dnl acl_final_exec_prefix, containing the values to which $prefix and
-+dnl $exec_prefix will expand at the end of the configure script.
-+AC_DEFUN([AC_LIB_PREPARE_PREFIX],
-+[
-+ dnl Unfortunately, prefix and exec_prefix get only finally determined
-+ dnl at the end of configure.
-+ if test "X$prefix" = "XNONE"; then
-+ acl_final_prefix="$ac_default_prefix"
-+ else
-+ acl_final_prefix="$prefix"
-+ fi
-+ if test "X$exec_prefix" = "XNONE"; then
-+ acl_final_exec_prefix='${prefix}'
-+ else
-+ acl_final_exec_prefix="$exec_prefix"
-+ fi
-+ acl_save_prefix="$prefix"
-+ prefix="$acl_final_prefix"
-+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
-+ prefix="$acl_save_prefix"
-+])
-+
-+dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
-+dnl variables prefix and exec_prefix bound to the values they will have
-+dnl at the end of the configure script.
-+AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
-+[
-+ acl_save_prefix="$prefix"
-+ prefix="$acl_final_prefix"
-+ acl_save_exec_prefix="$exec_prefix"
-+ exec_prefix="$acl_final_exec_prefix"
-+ $1
-+ exec_prefix="$acl_save_exec_prefix"
-+ prefix="$acl_save_prefix"
-+])
-+
-+# lib-link.m4 serial 6 (gettext-0.14.3)
-+dnl Copyright (C) 2001-2005 Free Software Foundation, Inc.
-+dnl This file is free software; the Free Software Foundation
-+dnl gives unlimited permission to copy and/or distribute it,
-+dnl with or without modifications, as long as this notice is preserved.
-+
-+dnl From Bruno Haible.
-+
-+AC_PREREQ(2.50)
-+
-+dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
-+dnl the libraries corresponding to explicit and implicit dependencies.
-+dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
-+dnl augments the CPPFLAGS variable.
-+AC_DEFUN([AC_LIB_LINKFLAGS],
-+[
-+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
-+ AC_REQUIRE([AC_LIB_RPATH])
-+ define([Name],[translit([$1],[./-], [___])])
-+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
-+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
-+ AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
-+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
-+ ac_cv_lib[]Name[]_libs="$LIB[]NAME"
-+ ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
-+ ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
-+ ])
-+ LIB[]NAME="$ac_cv_lib[]Name[]_libs"
-+ LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
-+ INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
-+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
-+ AC_SUBST([LIB]NAME)
-+ AC_SUBST([LTLIB]NAME)
-+ dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
-+ dnl results of this search when this library appears as a dependency.
-+ HAVE_LIB[]NAME=yes
-+ undefine([Name])
-+ undefine([NAME])
-+])
-+
-+dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode)
-+dnl searches for libname and the libraries corresponding to explicit and
-+dnl implicit dependencies, together with the specified include files and
-+dnl the ability to compile and link the specified testcode. If found, it
-+dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
-+dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
-+dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
-+dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
-+AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
-+[
-+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
-+ AC_REQUIRE([AC_LIB_RPATH])
-+ define([Name],[translit([$1],[./-], [___])])
-+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
-+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
-+
-+ dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
-+ dnl accordingly.
-+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
-+
-+ dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
-+ dnl because if the user has installed lib[]Name and not disabled its use
-+ dnl via --without-lib[]Name-prefix, he wants to use it.
-+ ac_save_CPPFLAGS="$CPPFLAGS"
-+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
-+
-+ AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
-+ ac_save_LIBS="$LIBS"
-+ LIBS="$LIBS $LIB[]NAME"
-+ AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no])
-+ LIBS="$ac_save_LIBS"
-+ ])
-+ if test "$ac_cv_lib[]Name" = yes; then
-+ HAVE_LIB[]NAME=yes
-+ AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.])
-+ AC_MSG_CHECKING([how to link with lib[]$1])
-+ AC_MSG_RESULT([$LIB[]NAME])
-+ else
-+ HAVE_LIB[]NAME=no
-+ dnl If $LIB[]NAME didn't lead to a usable library, we don't need
-+ dnl $INC[]NAME either.
-+ CPPFLAGS="$ac_save_CPPFLAGS"
-+ LIB[]NAME=
-+ LTLIB[]NAME=
-+ fi
-+ AC_SUBST([HAVE_LIB]NAME)
-+ AC_SUBST([LIB]NAME)
-+ AC_SUBST([LTLIB]NAME)
-+ undefine([Name])
-+ undefine([NAME])
-+])
-+
-+dnl Determine the platform dependent parameters needed to use rpath:
-+dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
-+dnl hardcode_direct, hardcode_minus_L.
-+AC_DEFUN([AC_LIB_RPATH],
-+[
-+ dnl Tell automake >= 1.10 to complain if config.rpath is missing.
-+ m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
-+ AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
-+ AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
-+ AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
-+ AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
-+ AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [
-+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
-+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
-+ . ./conftest.sh
-+ rm -f ./conftest.sh
-+ acl_cv_rpath=done
-+ ])
-+ wl="$acl_cv_wl"
-+ libext="$acl_cv_libext"
-+ shlibext="$acl_cv_shlibext"
-+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
-+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
-+ hardcode_direct="$acl_cv_hardcode_direct"
-+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
-+ dnl Determine whether the user wants rpath handling at all.
-+ AC_ARG_ENABLE(rpath,
-+ [ --disable-rpath do not hardcode runtime library paths],
-+ :, enable_rpath=yes)
-+])
-+
-+dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
-+dnl the libraries corresponding to explicit and implicit dependencies.
-+dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
-+AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
-+[
-+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
-+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
-+ dnl By default, look in $includedir and $libdir.
-+ use_additional=yes
-+ AC_LIB_WITH_FINAL_PREFIX([
-+ eval additional_includedir=\"$includedir\"
-+ eval additional_libdir=\"$libdir\"
-+ ])
-+ AC_LIB_ARG_WITH([lib$1-prefix],
-+[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib
-+ --without-lib$1-prefix don't search for lib$1 in includedir and libdir],
-+[
-+ if test "X$withval" = "Xno"; then
-+ use_additional=no
-+ else
-+ if test "X$withval" = "X"; then
-+ AC_LIB_WITH_FINAL_PREFIX([
-+ eval additional_includedir=\"$includedir\"
-+ eval additional_libdir=\"$libdir\"
-+ ])
-+ else
-+ additional_includedir="$withval/include"
-+ additional_libdir="$withval/lib"
-+ fi
-+ fi
-+])
-+ dnl Search the library and its dependencies in $additional_libdir and
-+ dnl $LDFLAGS. Using breadth-first-seach.
-+ LIB[]NAME=
-+ LTLIB[]NAME=
-+ INC[]NAME=
-+ rpathdirs=
-+ ltrpathdirs=
-+ names_already_handled=
-+ names_next_round='$1 $2'
-+ while test -n "$names_next_round"; do
-+ names_this_round="$names_next_round"
-+ names_next_round=
-+ for name in $names_this_round; do
-+ already_handled=
-+ for n in $names_already_handled; do
-+ if test "$n" = "$name"; then
-+ already_handled=yes
-+ break
-+ fi
-+ done
-+ if test -z "$already_handled"; then
-+ names_already_handled="$names_already_handled $name"
-+ dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
-+ dnl or AC_LIB_HAVE_LINKFLAGS call.
-+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
-+ eval value=\"\$HAVE_LIB$uppername\"
-+ if test -n "$value"; then
-+ if test "$value" = yes; then
-+ eval value=\"\$LIB$uppername\"
-+ test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
-+ eval value=\"\$LTLIB$uppername\"
-+ test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
-+ else
-+ dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
-+ dnl that this library doesn't exist. So just drop it.
-+ :
-+ fi
-+ else
-+ dnl Search the library lib$name in $additional_libdir and $LDFLAGS
-+ dnl and the already constructed $LIBNAME/$LTLIBNAME.
-+ found_dir=
-+ found_la=
-+ found_so=
-+ found_a=
-+ if test $use_additional = yes; then
-+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
-+ found_dir="$additional_libdir"
-+ found_so="$additional_libdir/lib$name.$shlibext"
-+ if test -f "$additional_libdir/lib$name.la"; then
-+ found_la="$additional_libdir/lib$name.la"
-+ fi
-+ else
-+ if test -f "$additional_libdir/lib$name.$libext"; then
-+ found_dir="$additional_libdir"
-+ found_a="$additional_libdir/lib$name.$libext"
-+ if test -f "$additional_libdir/lib$name.la"; then
-+ found_la="$additional_libdir/lib$name.la"
-+ fi
-+ fi
-+ fi
-+ fi
-+ if test "X$found_dir" = "X"; then
-+ for x in $LDFLAGS $LTLIB[]NAME; do
-+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-+ case "$x" in
-+ -L*)
-+ dir=`echo "X$x" | sed -e 's/^X-L//'`
-+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
-+ found_dir="$dir"
-+ found_so="$dir/lib$name.$shlibext"
-+ if test -f "$dir/lib$name.la"; then
-+ found_la="$dir/lib$name.la"
-+ fi
-+ else
-+ if test -f "$dir/lib$name.$libext"; then
-+ found_dir="$dir"
-+ found_a="$dir/lib$name.$libext"
-+ if test -f "$dir/lib$name.la"; then
-+ found_la="$dir/lib$name.la"
-+ fi
-+ fi
-+ fi
-+ ;;
-+ esac
-+ if test "X$found_dir" != "X"; then
-+ break
-+ fi
-+ done
-+ fi
-+ if test "X$found_dir" != "X"; then
-+ dnl Found the library.
-+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
-+ if test "X$found_so" != "X"; then
-+ dnl Linking with a shared library. We attempt to hardcode its
-+ dnl directory into the executable's runpath, unless it's the
-+ dnl standard /usr/lib.
-+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
-+ dnl No hardcoding is needed.
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
-+ else
-+ dnl Use an explicit option to hardcode DIR into the resulting
-+ dnl binary.
-+ dnl Potentially add DIR to ltrpathdirs.
-+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
-+ haveit=
-+ for x in $ltrpathdirs; do
-+ if test "X$x" = "X$found_dir"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ ltrpathdirs="$ltrpathdirs $found_dir"
-+ fi
-+ dnl The hardcoding into $LIBNAME is system dependent.
-+ if test "$hardcode_direct" = yes; then
-+ dnl Using DIR/libNAME.so during linking hardcodes DIR into the
-+ dnl resulting binary.
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
-+ else
-+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
-+ dnl Use an explicit option to hardcode DIR into the resulting
-+ dnl binary.
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
-+ dnl Potentially add DIR to rpathdirs.
-+ dnl The rpathdirs will be appended to $LIBNAME at the end.
-+ haveit=
-+ for x in $rpathdirs; do
-+ if test "X$x" = "X$found_dir"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ rpathdirs="$rpathdirs $found_dir"
-+ fi
-+ else
-+ dnl Rely on "-L$found_dir".
-+ dnl But don't add it if it's already contained in the LDFLAGS
-+ dnl or the already constructed $LIBNAME
-+ haveit=
-+ for x in $LDFLAGS $LIB[]NAME; do
-+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-+ if test "X$x" = "X-L$found_dir"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
-+ fi
-+ if test "$hardcode_minus_L" != no; then
-+ dnl FIXME: Not sure whether we should use
-+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
-+ dnl here.
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
-+ else
-+ dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
-+ dnl here, because this doesn't fit in flags passed to the
-+ dnl compiler. So give up. No hardcoding. This affects only
-+ dnl very old systems.
-+ dnl FIXME: Not sure whether we should use
-+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
-+ dnl here.
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
-+ fi
-+ fi
-+ fi
-+ fi
-+ else
-+ if test "X$found_a" != "X"; then
-+ dnl Linking with a static library.
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
-+ else
-+ dnl We shouldn't come here, but anyway it's good to have a
-+ dnl fallback.
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
-+ fi
-+ fi
-+ dnl Assume the include files are nearby.
-+ additional_includedir=
-+ case "$found_dir" in
-+ */lib | */lib/)
-+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
-+ additional_includedir="$basedir/include"
-+ ;;
-+ esac
-+ if test "X$additional_includedir" != "X"; then
-+ dnl Potentially add $additional_includedir to $INCNAME.
-+ dnl But don't add it
-+ dnl 1. if it's the standard /usr/include,
-+ dnl 2. if it's /usr/local/include and we are using GCC on Linux,
-+ dnl 3. if it's already present in $CPPFLAGS or the already
-+ dnl constructed $INCNAME,
-+ dnl 4. if it doesn't exist as a directory.
-+ if test "X$additional_includedir" != "X/usr/include"; then
-+ haveit=
-+ if test "X$additional_includedir" = "X/usr/local/include"; then
-+ if test -n "$GCC"; then
-+ case $host_os in
-+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
-+ esac
-+ fi
-+ fi
-+ if test -z "$haveit"; then
-+ for x in $CPPFLAGS $INC[]NAME; do
-+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-+ if test "X$x" = "X-I$additional_includedir"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ if test -d "$additional_includedir"; then
-+ dnl Really add $additional_includedir to $INCNAME.
-+ INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
-+ fi
-+ fi
-+ fi
-+ fi
-+ fi
-+ dnl Look for dependencies.
-+ if test -n "$found_la"; then
-+ dnl Read the .la file. It defines the variables
-+ dnl dlname, library_names, old_library, dependency_libs, current,
-+ dnl age, revision, installed, dlopen, dlpreopen, libdir.
-+ save_libdir="$libdir"
-+ case "$found_la" in
-+ */* | *\\*) . "$found_la" ;;
-+ *) . "./$found_la" ;;
-+ esac
-+ libdir="$save_libdir"
-+ dnl We use only dependency_libs.
-+ for dep in $dependency_libs; do
-+ case "$dep" in
-+ -L*)
-+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
-+ dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
-+ dnl But don't add it
-+ dnl 1. if it's the standard /usr/lib,
-+ dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
-+ dnl 3. if it's already present in $LDFLAGS or the already
-+ dnl constructed $LIBNAME,
-+ dnl 4. if it doesn't exist as a directory.
-+ if test "X$additional_libdir" != "X/usr/lib"; then
-+ haveit=
-+ if test "X$additional_libdir" = "X/usr/local/lib"; then
-+ if test -n "$GCC"; then
-+ case $host_os in
-+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
-+ esac
-+ fi
-+ fi
-+ if test -z "$haveit"; then
-+ haveit=
-+ for x in $LDFLAGS $LIB[]NAME; do
-+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-+ if test "X$x" = "X-L$additional_libdir"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ if test -d "$additional_libdir"; then
-+ dnl Really add $additional_libdir to $LIBNAME.
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
-+ fi
-+ fi
-+ haveit=
-+ for x in $LDFLAGS $LTLIB[]NAME; do
-+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-+ if test "X$x" = "X-L$additional_libdir"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ if test -d "$additional_libdir"; then
-+ dnl Really add $additional_libdir to $LTLIBNAME.
-+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
-+ fi
-+ fi
-+ fi
-+ fi
-+ ;;
-+ -R*)
-+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
-+ if test "$enable_rpath" != no; then
-+ dnl Potentially add DIR to rpathdirs.
-+ dnl The rpathdirs will be appended to $LIBNAME at the end.
-+ haveit=
-+ for x in $rpathdirs; do
-+ if test "X$x" = "X$dir"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ rpathdirs="$rpathdirs $dir"
-+ fi
-+ dnl Potentially add DIR to ltrpathdirs.
-+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
-+ haveit=
-+ for x in $ltrpathdirs; do
-+ if test "X$x" = "X$dir"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ ltrpathdirs="$ltrpathdirs $dir"
-+ fi
-+ fi
-+ ;;
-+ -l*)
-+ dnl Handle this in the next round.
-+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
-+ ;;
-+ *.la)
-+ dnl Handle this in the next round. Throw away the .la's
-+ dnl directory; it is already contained in a preceding -L
-+ dnl option.
-+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
-+ ;;
-+ *)
-+ dnl Most likely an immediate library name.
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
-+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
-+ ;;
-+ esac
-+ done
-+ fi
-+ else
-+ dnl Didn't find the library; assume it is in the system directories
-+ dnl known to the linker and runtime loader. (All the system
-+ dnl directories known to the linker should also be known to the
-+ dnl runtime loader, otherwise the system is severely misconfigured.)
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
-+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
-+ fi
-+ fi
-+ fi
-+ done
-+ done
-+ if test "X$rpathdirs" != "X"; then
-+ if test -n "$hardcode_libdir_separator"; then
-+ dnl Weird platform: only the last -rpath option counts, the user must
-+ dnl pass all path elements in one option. We can arrange that for a
-+ dnl single library, but not when more than one $LIBNAMEs are used.
-+ alldirs=
-+ for found_dir in $rpathdirs; do
-+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
-+ done
-+ dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
-+ acl_save_libdir="$libdir"
-+ libdir="$alldirs"
-+ eval flag=\"$hardcode_libdir_flag_spec\"
-+ libdir="$acl_save_libdir"
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
-+ else
-+ dnl The -rpath options are cumulative.
-+ for found_dir in $rpathdirs; do
-+ acl_save_libdir="$libdir"
-+ libdir="$found_dir"
-+ eval flag=\"$hardcode_libdir_flag_spec\"
-+ libdir="$acl_save_libdir"
-+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
-+ done
-+ fi
-+ fi
-+ if test "X$ltrpathdirs" != "X"; then
-+ dnl When using libtool, the option that works for both libraries and
-+ dnl executables is -R. The -R options are cumulative.
-+ for found_dir in $ltrpathdirs; do
-+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
-+ done
-+ fi
-+])
-+
-+dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
-+dnl unless already present in VAR.
-+dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
-+dnl contains two or three consecutive elements that belong together.
-+AC_DEFUN([AC_LIB_APPENDTOVAR],
-+[
-+ for element in [$2]; do
-+ haveit=
-+ for x in $[$1]; do
-+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-+ if test "X$x" = "X$element"; then
-+ haveit=yes
-+ break
-+ fi
-+ done
-+ if test -z "$haveit"; then
-+ [$1]="${[$1]}${[$1]:+ }$element"
-+ fi
-+ done
-+])
-+
-+# lib-ld.m4 serial 3 (gettext-0.13)
-+dnl Copyright (C) 1996-2003 Free Software Foundation, Inc.
-+dnl This file is free software; the Free Software Foundation
-+dnl gives unlimited permission to copy and/or distribute it,
-+dnl with or without modifications, as long as this notice is preserved.
-+
-+dnl Subroutines of libtool.m4,
-+dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
-+dnl with libtool.m4.
-+
-+dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
-+AC_DEFUN([AC_LIB_PROG_LD_GNU],
-+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld,
-+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-+case `$LD -v 2>&1 </dev/null` in
-+*GNU* | *'with BFD'*)
-+ acl_cv_prog_gnu_ld=yes ;;
-+*)
-+ acl_cv_prog_gnu_ld=no ;;
-+esac])
-+with_gnu_ld=$acl_cv_prog_gnu_ld
-+])
-+
-+dnl From libtool-1.4. Sets the variable LD.
-+AC_DEFUN([AC_LIB_PROG_LD],
-+[AC_ARG_WITH(gnu-ld,
-+[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-+AC_REQUIRE([AC_PROG_CC])dnl
-+AC_REQUIRE([AC_CANONICAL_HOST])dnl
-+# Prepare PATH_SEPARATOR.
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
-+fi
-+ac_prog=ld
-+if test "$GCC" = yes; then
-+ # Check if gcc -print-prog-name=ld gives a path.
-+ AC_MSG_CHECKING([for ld used by GCC])
-+ case $host in
-+ *-*-mingw*)
-+ # gcc leaves a trailing carriage return which upsets mingw
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-+ *)
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-+ esac
-+ case $ac_prog in
-+ # Accept absolute paths.
-+ [[\\/]* | [A-Za-z]:[\\/]*)]
-+ [re_direlt='/[^/][^/]*/\.\./']
-+ # Canonicalize the path of ld
-+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-+ done
-+ test -z "$LD" && LD="$ac_prog"
-+ ;;
-+ "")
-+ # If it fails, then pretend we aren't using GCC.
-+ ac_prog=ld
-+ ;;
-+ *)
-+ # If it is relative, then search for the first ld in PATH.
-+ with_gnu_ld=unknown
-+ ;;
-+ esac
-+elif test "$with_gnu_ld" = yes; then
-+ AC_MSG_CHECKING([for GNU ld])
-+else
-+ AC_MSG_CHECKING([for non-GNU ld])
-+fi
-+AC_CACHE_VAL(acl_cv_path_LD,
-+[if test -z "$LD"; then
-+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-+ for ac_dir in $PATH; do
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-+ acl_cv_path_LD="$ac_dir/$ac_prog"
-+ # Check to see if the program is GNU ld. I'd rather use --version,
-+ # but apparently some GNU ld's only accept -v.
-+ # Break only if it was the GNU/non-GNU ld that we prefer.
-+ case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
-+ *GNU* | *'with BFD'*)
-+ test "$with_gnu_ld" != no && break ;;
-+ *)
-+ test "$with_gnu_ld" != yes && break ;;
-+ esac
-+ fi
-+ done
-+ IFS="$ac_save_ifs"
-+else
-+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
-+fi])
-+LD="$acl_cv_path_LD"
-+if test -n "$LD"; then
-+ AC_MSG_RESULT($LD)
-+else
-+ AC_MSG_RESULT(no)
-+fi
-+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-+AC_LIB_PROG_LD_GNU
-+])
-+
-+# progtest.m4 serial 4 (gettext-0.14.2)
-+dnl Copyright (C) 1996-2003, 2005 Free Software Foundation, Inc.
-+dnl This file is free software; the Free Software Foundation
-+dnl gives unlimited permission to copy and/or distribute it,
-+dnl with or without modifications, as long as this notice is preserved.
-+dnl
-+dnl This file can can be used in projects which are not available under
-+dnl the GNU General Public License or the GNU Library General Public
-+dnl License but which still want to provide support for the GNU gettext
-+dnl functionality.
-+dnl Please note that the actual code of the GNU gettext library is covered
-+dnl by the GNU Library General Public License, and the rest of the GNU
-+dnl gettext package package is covered by the GNU General Public License.
-+dnl They are *not* in the public domain.
-+
-+dnl Authors:
-+dnl Ulrich Drepper <drepper@cygnus.com>, 1996.
-+
-+AC_PREREQ(2.50)
-+
-+# Search path for a program which passes the given test.
-+
-+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
-+dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-+AC_DEFUN([AM_PATH_PROG_WITH_TEST],
-+[
-+# Prepare PATH_SEPARATOR.
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
-+fi
-+
-+# Find out how to test for executable files. Don't use a zero-byte file,
-+# as systems may use methods other than mode bits to determine executability.
-+cat >conf$$.file <<_ASEOF
-+#! /bin/sh
-+exit 0
-+_ASEOF
-+chmod +x conf$$.file
-+if test -x conf$$.file >/dev/null 2>&1; then
-+ ac_executable_p="test -x"
-+else
-+ ac_executable_p="test -f"
-+fi
-+rm -f conf$$.file
-+
-+# Extract the first word of "$2", so it can be a program name with args.
-+set dummy $2; ac_word=[$]2
-+AC_MSG_CHECKING([for $ac_word])
-+AC_CACHE_VAL(ac_cv_path_$1,
-+[case "[$]$1" in
-+ [[\\/]]* | ?:[[\\/]]*)
-+ ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
-+ ;;
-+ *)
-+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
-+ for ac_dir in ifelse([$5], , $PATH, [$5]); do
-+ IFS="$ac_save_IFS"
-+ test -z "$ac_dir" && ac_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
-+ echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD
-+ if [$3]; then
-+ ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext"
-+ break 2
-+ fi
-+ fi
-+ done
-+ done
-+ IFS="$ac_save_IFS"
-+dnl If no 4th arg is given, leave the cache variable unset,
-+dnl so AC_PATH_PROGS will keep looking.
-+ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-+])dnl
-+ ;;
-+esac])dnl
-+$1="$ac_cv_path_$1"
-+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
-+ AC_MSG_RESULT([$]$1)
-+else
-+ AC_MSG_RESULT(no)
-+fi
-+AC_SUBST($1)dnl
-+])
-+
-+# isc-posix.m4 serial 2 (gettext-0.11.2)
-+dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
-+dnl This file is free software; the Free Software Foundation
-+dnl gives unlimited permission to copy and/or distribute it,
-+dnl with or without modifications, as long as this notice is preserved.
-+
-+# This file is not needed with autoconf-2.53 and newer. Remove it in 2005.
-+
-+# This test replaces the one in autoconf.
-+# Currently this macro should have the same name as the autoconf macro
-+# because gettext's gettext.m4 (distributed in the automake package)
-+# still uses it. Otherwise, the use in gettext.m4 makes autoheader
-+# give these diagnostics:
-+# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX
-+# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX
-+
-+undefine([AC_ISC_POSIX])
-+
-+AC_DEFUN([AC_ISC_POSIX],
-+ [
-+ dnl This test replaces the obsolescent AC_ISC_POSIX kludge.
-+ AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"])
-+ ]
-+)
-+
-+# Do all the work for Automake. This macro actually does too much --
-+# some checks are only needed if your package does certain things.
-+# But this isn't really a big deal.
-+
-+# serial 1
-+
-+dnl Usage:
-+dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-+
-+AC_DEFUN([AM_INIT_AUTOMAKE],
-+[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-+AC_REQUIRE([AC_PROG_INSTALL])
-+PACKAGE=[$1]
-+AC_SUBST(PACKAGE)
-+VERSION=[$2]
-+AC_SUBST(VERSION)
-+dnl test to see if srcdir already configured
-+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-+fi
-+ifelse([$3],,
-+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-+AC_REQUIRE([AM_SANITY_CHECK])
-+AC_REQUIRE([AC_ARG_PROGRAM])
-+dnl FIXME This is truly gross.
-+missing_dir=`cd $ac_aux_dir && pwd`
-+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir)
-+AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir)
-+AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-+AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-+AC_REQUIRE([AC_PROG_MAKE_SET])])
-+
-+# Copyright 2002 Free Software Foundation, Inc.
-+
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2, or (at your option)
-+# any later version.
-+
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+
-+# AM_AUTOMAKE_VERSION(VERSION)
-+# ----------------------------
-+# Automake X.Y traces this macro to ensure aclocal.m4 has been
-+# generated from the m4 files accompanying Automake X.Y.
-+AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"])
-+
-+# AM_SET_CURRENT_AUTOMAKE_VERSION
-+# -------------------------------
-+# Call AM_AUTOMAKE_VERSION so it can be traced.
-+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-+ [AM_AUTOMAKE_VERSION([1.4-p6])])
-+
-+#
-+# Check to make sure that the build environment is sane.
-+#
-+
-+AC_DEFUN([AM_SANITY_CHECK],
-+[AC_MSG_CHECKING([whether build environment is sane])
-+# Just in case
-+sleep 1
-+echo timestamp > conftestfile
-+# Do `set' in a subshell so we don't clobber the current shell's
-+# arguments. Must try -L first in case configure is actually a
-+# symlink; some systems play weird games with the mod time of symlinks
-+# (eg FreeBSD returns the mod time of the symlink's containing
-+# directory).
-+if (
-+ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-+ if test "[$]*" = "X"; then
-+ # -L didn't work.
-+ set X `ls -t $srcdir/configure conftestfile`
-+ fi
-+ if test "[$]*" != "X $srcdir/configure conftestfile" \
-+ && test "[$]*" != "X conftestfile $srcdir/configure"; then
-+
-+ # If neither matched, then we have a broken ls. This can happen
-+ # if, for instance, CONFIG_SHELL is bash and it inherits a
-+ # broken ls alias from the environment. This has actually
-+ # happened. Such a system could not be considered "sane".
-+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
-+alias in your environment])
-+ fi
-+
-+ test "[$]2" = conftestfile
-+ )
-+then
-+ # Ok.
-+ :
-+else
-+ AC_MSG_ERROR([newly created file is older than distributed files!
-+Check your system clock])
-+fi
-+rm -f conftest*
-+AC_MSG_RESULT(yes)])
-+
-+dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-+dnl The program must properly implement --version.
-+AC_DEFUN([AM_MISSING_PROG],
-+[AC_MSG_CHECKING(for working $2)
-+# Run test in a subshell; some versions of sh will print an error if
-+# an executable is not found, even if stderr is redirected.
-+# Redirect stdin to placate older versions of autoconf. Sigh.
-+if ($2 --version) < /dev/null > /dev/null 2>&1; then
-+ $1=$2
-+ AC_MSG_RESULT(found)
-+else
-+ $1="$3/missing $2"
-+ AC_MSG_RESULT(missing)
-+fi
-+AC_SUBST($1)])
-+
-+# Like AC_CONFIG_HEADER, but automatically create stamp file.
-+
-+AC_DEFUN([AM_CONFIG_HEADER],
-+[AC_PREREQ([2.12])
-+AC_CONFIG_HEADER([$1])
-+dnl When config.status generates a header, we must update the stamp-h file.
-+dnl This file resides in the same directory as the config header
-+dnl that is generated. We must strip everything past the first ":",
-+dnl and everything past the last "/".
-+AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
-+ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
-+<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
-+<<am_indx=1
-+for am_file in <<$1>>; do
-+ case " <<$>>CONFIG_HEADERS " in
-+ *" <<$>>am_file "*<<)>>
-+ echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
-+ ;;
-+ esac
-+ am_indx=`expr "<<$>>am_indx" + 1`
-+done<<>>dnl>>)
-+changequote([,]))])
-+
-+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-+
-+# serial 48 Debian 1.5.22-2 AC_PROG_LIBTOOL
-+
-+
-+# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-+# -----------------------------------------------------------
-+# If this macro is not defined by Autoconf, define it here.
-+m4_ifdef([AC_PROVIDE_IFELSE],
-+ [],
-+ [m4_define([AC_PROVIDE_IFELSE],
-+ [m4_ifdef([AC_PROVIDE_$1],
-+ [$2], [$3])])])
-+
-+
-+# AC_PROG_LIBTOOL
-+# ---------------
-+AC_DEFUN([AC_PROG_LIBTOOL],
-+[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-+dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-+dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-+ AC_PROVIDE_IFELSE([AC_PROG_CXX],
-+ [AC_LIBTOOL_CXX],
-+ [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-+ ])])
-+dnl And a similar setup for Fortran 77 support
-+ AC_PROVIDE_IFELSE([AC_PROG_F77],
-+ [AC_LIBTOOL_F77],
-+ [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
-+])])
-+
-+dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-+dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-+dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-+ AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-+ [AC_LIBTOOL_GCJ],
-+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-+ [AC_LIBTOOL_GCJ],
-+ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-+ [AC_LIBTOOL_GCJ],
-+ [ifdef([AC_PROG_GCJ],
-+ [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-+ ifdef([A][M_PROG_GCJ],
-+ [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-+ ifdef([LT_AC_PROG_GCJ],
-+ [define([LT_AC_PROG_GCJ],
-+ defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
-+])])# AC_PROG_LIBTOOL
-+
-+
-+# _AC_PROG_LIBTOOL
-+# ----------------
-+AC_DEFUN([_AC_PROG_LIBTOOL],
-+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-+AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-+AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
-+AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-+
-+# This can be used to rebuild libtool when needed
-+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-+
-+# Always use our own libtool.
-+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-+AC_SUBST(LIBTOOL)dnl
-+
-+# Prevent multiple expansion
-+define([AC_PROG_LIBTOOL], [])
-+])# _AC_PROG_LIBTOOL
-+
-+
-+# AC_LIBTOOL_SETUP
-+# ----------------
-+AC_DEFUN([AC_LIBTOOL_SETUP],
-+[AC_PREREQ(2.50)dnl
-+AC_REQUIRE([AC_ENABLE_SHARED])dnl
-+AC_REQUIRE([AC_ENABLE_STATIC])dnl
-+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-+AC_REQUIRE([AC_CANONICAL_HOST])dnl
-+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-+AC_REQUIRE([AC_PROG_CC])dnl
-+AC_REQUIRE([AC_PROG_LD])dnl
-+AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-+AC_REQUIRE([AC_PROG_NM])dnl
-+
-+AC_REQUIRE([AC_PROG_LN_S])dnl
-+AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-+AC_REQUIRE([AC_OBJEXT])dnl
-+AC_REQUIRE([AC_EXEEXT])dnl
-+dnl
-+
-+AC_LIBTOOL_SYS_MAX_CMD_LEN
-+AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-+AC_LIBTOOL_OBJDIR
-+
-+AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-+_LT_AC_PROG_ECHO_BACKSLASH
-+
-+case $host_os in
-+aix3*)
-+ # AIX sometimes has problems with the GCC collect2 program. For some
-+ # reason, if we set the COLLECT_NAMES environment variable, the problems
-+ # vanish in a puff of smoke.
-+ if test "X${COLLECT_NAMES+set}" != Xset; then
-+ COLLECT_NAMES=
-+ export COLLECT_NAMES
-+ fi
-+ ;;
-+esac
-+
-+# Sed substitution that helps us do robust quoting. It backslashifies
-+# metacharacters that are still active within double-quoted strings.
-+Xsed='sed -e 1s/^X//'
-+[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
-+
-+# Same as above, but do not quote variable references.
-+[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
-+
-+# Sed substitution to delay expansion of an escaped shell variable in a
-+# double_quote_subst'ed string.
-+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-+
-+# Sed substitution to avoid accidental globbing in evaled expressions
-+no_glob_subst='s/\*/\\\*/g'
-+
-+# Constants:
-+rm="rm -f"
-+
-+# Global variables:
-+default_ofile=libtool
-+can_build_shared=yes
-+
-+# All known linkers require a `.a' archive for static linking (except MSVC,
-+# which needs '.lib').
-+libext=a
-+ltmain="$ac_aux_dir/ltmain.sh"
-+ofile="$default_ofile"
-+with_gnu_ld="$lt_cv_prog_gnu_ld"
-+
-+AC_CHECK_TOOL(AR, ar, false)
-+AC_CHECK_TOOL(RANLIB, ranlib, :)
-+AC_CHECK_TOOL(STRIP, strip, :)
-+
-+old_CC="$CC"
-+old_CFLAGS="$CFLAGS"
-+
-+# Set sane defaults for various variables
-+test -z "$AR" && AR=ar
-+test -z "$AR_FLAGS" && AR_FLAGS=cru
-+test -z "$AS" && AS=as
-+test -z "$CC" && CC=cc
-+test -z "$LTCC" && LTCC=$CC
-+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-+test -z "$DLLTOOL" && DLLTOOL=dlltool
-+test -z "$LD" && LD=ld
-+test -z "$LN_S" && LN_S="ln -s"
-+test -z "$MAGIC_CMD" && MAGIC_CMD=file
-+test -z "$NM" && NM=nm
-+test -z "$SED" && SED=sed
-+test -z "$OBJDUMP" && OBJDUMP=objdump
-+test -z "$RANLIB" && RANLIB=:
-+test -z "$STRIP" && STRIP=:
-+test -z "$ac_objext" && ac_objext=o
-+
-+# Determine commands to create old-style static archives.
-+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-+old_postinstall_cmds='chmod 644 $oldlib'
-+old_postuninstall_cmds=
-+
-+if test -n "$RANLIB"; then
-+ case $host_os in
-+ openbsd*)
-+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-+ ;;
-+ *)
-+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-+ ;;
-+ esac
-+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-+fi
-+
-+_LT_CC_BASENAME([$compiler])
-+
-+# Only perform the check for file, if the check method requires it
-+case $deplibs_check_method in
-+file_magic*)
-+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-+ AC_PATH_MAGIC
-+ fi
-+ ;;
-+esac
-+
-+AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-+enable_win32_dll=yes, enable_win32_dll=no)
-+
-+AC_ARG_ENABLE([libtool-lock],
-+ [AC_HELP_STRING([--disable-libtool-lock],
-+ [avoid locking (might break parallel builds)])])
-+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-+
-+AC_ARG_WITH([pic],
-+ [AC_HELP_STRING([--with-pic],
-+ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-+ [pic_mode="$withval"],
-+ [pic_mode=default])
-+test -z "$pic_mode" && pic_mode=default
-+
-+# Use C for the default configuration in the libtool script
-+tagname=
-+AC_LIBTOOL_LANG_C_CONFIG
-+_LT_AC_TAGCONFIG
-+])# AC_LIBTOOL_SETUP
-+
-+
-+# _LT_AC_SYS_COMPILER
-+# -------------------
-+AC_DEFUN([_LT_AC_SYS_COMPILER],
-+[AC_REQUIRE([AC_PROG_CC])dnl
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+])# _LT_AC_SYS_COMPILER
-+
-+
-+# _LT_CC_BASENAME(CC)
-+# -------------------
-+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
-+AC_DEFUN([_LT_CC_BASENAME],
-+[for cc_temp in $1""; do
-+ case $cc_temp in
-+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
-+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+])
-+
-+
-+# _LT_COMPILER_BOILERPLATE
-+# ------------------------
-+# Check for compiler boilerplate output or warnings with
-+# the simple compiler test code.
-+AC_DEFUN([_LT_COMPILER_BOILERPLATE],
-+[ac_outfile=conftest.$ac_objext
-+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+])# _LT_COMPILER_BOILERPLATE
-+
-+
-+# _LT_LINKER_BOILERPLATE
-+# ----------------------
-+# Check for linker boilerplate output or warnings with
-+# the simple link test code.
-+AC_DEFUN([_LT_LINKER_BOILERPLATE],
-+[ac_outfile=conftest.$ac_objext
-+printf "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm conftest*
-+])# _LT_LINKER_BOILERPLATE
-+
-+
-+# _LT_AC_SYS_LIBPATH_AIX
-+# ----------------------
-+# Links a minimal program and checks the executable
-+# for the system default hardcoded library path. In most cases,
-+# this is /usr/lib:/lib, but when the MPI compilers are used
-+# the location of the communication and MPI libs are included too.
-+# If we don't find anything, use the default library path according
-+# to the aix ld manual.
-+AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-+[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`; fi],[])
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+])# _LT_AC_SYS_LIBPATH_AIX
-+
-+
-+# _LT_AC_SHELL_INIT(ARG)
-+# ----------------------
-+AC_DEFUN([_LT_AC_SHELL_INIT],
-+[ifdef([AC_DIVERSION_NOTICE],
-+ [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-+ [AC_DIVERT_PUSH(NOTICE)])
-+$1
-+AC_DIVERT_POP
-+])# _LT_AC_SHELL_INIT
-+
-+
-+# _LT_AC_PROG_ECHO_BACKSLASH
-+# --------------------------
-+# Add some code to the start of the generated configure script which
-+# will find an echo command which doesn't interpret backslashes.
-+AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-+[_LT_AC_SHELL_INIT([
-+# Check that we are running under the correct shell.
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+
-+case X$ECHO in
-+X*--fallback-echo)
-+ # Remove one level of quotation (which was required for Make).
-+ ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-+ ;;
-+esac
-+
-+echo=${ECHO-echo}
-+if test "X[$]1" = X--no-reexec; then
-+ # Discard the --no-reexec flag, and continue.
-+ shift
-+elif test "X[$]1" = X--fallback-echo; then
-+ # Avoid inline document here, it may be left over
-+ :
-+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-+ # Yippee, $echo works!
-+ :
-+else
-+ # Restart under the correct shell.
-+ exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-+fi
-+
-+if test "X[$]1" = X--fallback-echo; then
-+ # used as fallback echo
-+ shift
-+ cat <<EOF
-+[$]*
-+EOF
-+ exit 0
-+fi
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-+
-+if test -z "$ECHO"; then
-+if test "X${echo_test_string+set}" != Xset; then
-+# find a string as large as possible, as long as the shell can cope with it
-+ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-+ if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-+ echo_test_string=`eval $cmd` &&
-+ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-+ then
-+ break
-+ fi
-+ done
-+fi
-+
-+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ :
-+else
-+ # The Solaris, AIX, and Digital Unix default echo programs unquote
-+ # backslashes. This makes it impossible to quote backslashes using
-+ # echo "$something" | sed 's/\\/\\\\/g'
-+ #
-+ # So, first we look for a working echo in the user's PATH.
-+
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for dir in $PATH /usr/ucb; do
-+ IFS="$lt_save_ifs"
-+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ echo="$dir/echo"
-+ break
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+
-+ if test "X$echo" = Xecho; then
-+ # We didn't find a better echo, so look for alternatives.
-+ if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ # This shell has a builtin print -r that does the trick.
-+ echo='print -r'
-+ elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-+ test "X$CONFIG_SHELL" != X/bin/ksh; then
-+ # If we have ksh, try running configure again with it.
-+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-+ export ORIGINAL_CONFIG_SHELL
-+ CONFIG_SHELL=/bin/ksh
-+ export CONFIG_SHELL
-+ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-+ else
-+ # Try using printf.
-+ echo='printf %s\n'
-+ if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ # Cool, printf works
-+ :
-+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-+ test "X$echo_testing_string" = 'X\t' &&
-+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-+ export CONFIG_SHELL
-+ SHELL="$CONFIG_SHELL"
-+ export SHELL
-+ echo="$CONFIG_SHELL [$]0 --fallback-echo"
-+ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-+ test "X$echo_testing_string" = 'X\t' &&
-+ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ echo="$CONFIG_SHELL [$]0 --fallback-echo"
-+ else
-+ # maybe with a smaller string...
-+ prev=:
-+
-+ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-+ if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-+ then
-+ break
-+ fi
-+ prev="$cmd"
-+ done
-+
-+ if test "$prev" != 'sed 50q "[$]0"'; then
-+ echo_test_string=`eval $prev`
-+ export echo_test_string
-+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-+ else
-+ # Oops. We lost completely, so just stick with echo.
-+ echo=echo
-+ fi
-+ fi
-+ fi
-+ fi
-+fi
-+fi
-+
-+# Copy echo and quote the copy suitably for passing to libtool from
-+# the Makefile, instead of quoting the original, which is used later.
-+ECHO=$echo
-+if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-+ ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-+fi
-+
-+AC_SUBST(ECHO)
-+])])# _LT_AC_PROG_ECHO_BACKSLASH
-+
-+
-+# _LT_AC_LOCK
-+# -----------
-+AC_DEFUN([_LT_AC_LOCK],
-+[AC_ARG_ENABLE([libtool-lock],
-+ [AC_HELP_STRING([--disable-libtool-lock],
-+ [avoid locking (might break parallel builds)])])
-+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-+
-+# Some flags need to be propagated to the compiler or linker for good
-+# libtool support.
-+case $host in
-+ia64-*-hpux*)
-+ # Find out which ABI we are using.
-+ echo 'int i;' > conftest.$ac_ext
-+ if AC_TRY_EVAL(ac_compile); then
-+ case `/usr/bin/file conftest.$ac_objext` in
-+ *ELF-32*)
-+ HPUX_IA64_MODE="32"
-+ ;;
-+ *ELF-64*)
-+ HPUX_IA64_MODE="64"
-+ ;;
-+ esac
-+ fi
-+ rm -rf conftest*
-+ ;;
-+*-*-irix6*)
-+ # Find out which ABI we are using.
-+ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-+ if AC_TRY_EVAL(ac_compile); then
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ case `/usr/bin/file conftest.$ac_objext` in
-+ *32-bit*)
-+ LD="${LD-ld} -melf32bsmip"
-+ ;;
-+ *N32*)
-+ LD="${LD-ld} -melf32bmipn32"
-+ ;;
-+ *64-bit*)
-+ LD="${LD-ld} -melf64bmip"
-+ ;;
-+ esac
-+ else
-+ case `/usr/bin/file conftest.$ac_objext` in
-+ *32-bit*)
-+ LD="${LD-ld} -32"
-+ ;;
-+ *N32*)
-+ LD="${LD-ld} -n32"
-+ ;;
-+ *64-bit*)
-+ LD="${LD-ld} -64"
-+ ;;
-+ esac
-+ fi
-+ fi
-+ rm -rf conftest*
-+ ;;
-+
-+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
-+ # Find out which ABI we are using.
-+ echo 'int i;' > conftest.$ac_ext
-+ if AC_TRY_EVAL(ac_compile); then
-+ case `/usr/bin/file conftest.o` in
-+ *32-bit*)
-+ case $host in
-+ x86_64-*linux*)
-+ LD="${LD-ld} -m elf_i386"
-+ ;;
-+ ppc64-*linux*|powerpc64-*linux*)
-+ LD="${LD-ld} -m elf32ppclinux"
-+ ;;
-+ s390x-*linux*)
-+ LD="${LD-ld} -m elf_s390"
-+ ;;
-+ sparc64-*linux*)
-+ LD="${LD-ld} -m elf32_sparc"
-+ ;;
-+ esac
-+ ;;
-+ *64-bit*)
-+ case $host in
-+ x86_64-*linux*)
-+ LD="${LD-ld} -m elf_x86_64"
-+ ;;
-+ ppc*-*linux*|powerpc*-*linux*)
-+ LD="${LD-ld} -m elf64ppc"
-+ ;;
-+ s390*-*linux*)
-+ LD="${LD-ld} -m elf64_s390"
-+ ;;
-+ sparc*-*linux*)
-+ LD="${LD-ld} -m elf64_sparc"
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ fi
-+ rm -rf conftest*
-+ ;;
-+
-+*-*-sco3.2v5*)
-+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-+ SAVE_CFLAGS="$CFLAGS"
-+ CFLAGS="$CFLAGS -belf"
-+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-+ [AC_LANG_PUSH(C)
-+ AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-+ AC_LANG_POP])
-+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-+ CFLAGS="$SAVE_CFLAGS"
-+ fi
-+ ;;
-+sparc*-*solaris*)
-+ # Find out which ABI we are using.
-+ echo 'int i;' > conftest.$ac_ext
-+ if AC_TRY_EVAL(ac_compile); then
-+ case `/usr/bin/file conftest.o` in
-+ *64-bit*)
-+ case $lt_cv_prog_gnu_ld in
-+ yes*) LD="${LD-ld} -m elf64_sparc" ;;
-+ *) LD="${LD-ld} -64" ;;
-+ esac
-+ ;;
-+ esac
-+ fi
-+ rm -rf conftest*
-+ ;;
-+
-+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-+[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-+ AC_CHECK_TOOL(AS, as, false)
-+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
-+ ;;
-+ ])
-+esac
-+
-+need_locks="$enable_libtool_lock"
-+
-+])# _LT_AC_LOCK
-+
-+
-+# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-+# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-+# ----------------------------------------------------------------
-+# Check whether the given compiler option works
-+AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-+[AC_REQUIRE([LT_AC_PROG_SED])
-+AC_CACHE_CHECK([$1], [$2],
-+ [$2=no
-+ ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="$3"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&AS_MESSAGE_LOG_FD
-+ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings other than the usual output.
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+ $2=yes
-+ fi
-+ fi
-+ $rm conftest*
-+])
-+
-+if test x"[$]$2" = xyes; then
-+ ifelse([$5], , :, [$5])
-+else
-+ ifelse([$6], , :, [$6])
-+fi
-+])# AC_LIBTOOL_COMPILER_OPTION
-+
-+
-+# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-+# [ACTION-SUCCESS], [ACTION-FAILURE])
-+# ------------------------------------------------------------
-+# Check whether the given compiler option works
-+AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-+[AC_CACHE_CHECK([$1], [$2],
-+ [$2=no
-+ save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS $3"
-+ printf "$lt_simple_link_test_code" > conftest.$ac_ext
-+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+ # The linker can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ if test -s conftest.err; then
-+ # Append any errors to the config.log.
-+ cat conftest.err 1>&AS_MESSAGE_LOG_FD
-+ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if diff conftest.exp conftest.er2 >/dev/null; then
-+ $2=yes
-+ fi
-+ else
-+ $2=yes
-+ fi
-+ fi
-+ $rm conftest*
-+ LDFLAGS="$save_LDFLAGS"
-+])
-+
-+if test x"[$]$2" = xyes; then
-+ ifelse([$4], , :, [$4])
-+else
-+ ifelse([$5], , :, [$5])
-+fi
-+])# AC_LIBTOOL_LINKER_OPTION
-+
-+
-+# AC_LIBTOOL_SYS_MAX_CMD_LEN
-+# --------------------------
-+AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
-+[# find the maximum length of command line arguments
-+AC_MSG_CHECKING([the maximum length of command line arguments])
-+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-+ i=0
-+ teststring="ABCD"
-+
-+ case $build_os in
-+ msdosdjgpp*)
-+ # On DJGPP, this test can blow up pretty badly due to problems in libc
-+ # (any single argument exceeding 2000 bytes causes a buffer overrun
-+ # during glob expansion). Even if it were fixed, the result of this
-+ # check would be larger than it should be.
-+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
-+ ;;
-+
-+ gnu*)
-+ # Under GNU Hurd, this test is not required because there is
-+ # no limit to the length of command line arguments.
-+ # Libtool will interpret -1 as no limit whatsoever
-+ lt_cv_sys_max_cmd_len=-1;
-+ ;;
-+
-+ cygwin* | mingw*)
-+ # On Win9x/ME, this test blows up -- it succeeds, but takes
-+ # about 5 minutes as the teststring grows exponentially.
-+ # Worse, since 9x/ME are not pre-emptively multitasking,
-+ # you end up with a "frozen" computer, even though with patience
-+ # the test eventually succeeds (with a max line length of 256k).
-+ # Instead, let's just punt: use the minimum linelength reported by
-+ # all of the supported platforms: 8192 (on NT/2K/XP).
-+ lt_cv_sys_max_cmd_len=8192;
-+ ;;
-+
-+ amigaos*)
-+ # On AmigaOS with pdksh, this test takes hours, literally.
-+ # So we just punt and use a minimum line length of 8192.
-+ lt_cv_sys_max_cmd_len=8192;
-+ ;;
-+
-+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-+ # This has been around since 386BSD, at least. Likely further.
-+ if test -x /sbin/sysctl; then
-+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-+ elif test -x /usr/sbin/sysctl; then
-+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-+ else
-+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
-+ fi
-+ # And add a safety zone
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-+ ;;
-+
-+ interix*)
-+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
-+ lt_cv_sys_max_cmd_len=196608
-+ ;;
-+
-+ osf*)
-+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-+ # nice to cause kernel panics so lets avoid the loop below.
-+ # First set a reasonable default.
-+ lt_cv_sys_max_cmd_len=16384
-+ #
-+ if test -x /sbin/sysconfig; then
-+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
-+ esac
-+ fi
-+ ;;
-+ sco3.2v5*)
-+ lt_cv_sys_max_cmd_len=102400
-+ ;;
-+ sysv5* | sco5v6* | sysv4.2uw2*)
-+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-+ if test -n "$kargmax"; then
-+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
-+ else
-+ lt_cv_sys_max_cmd_len=32768
-+ fi
-+ ;;
-+ *)
-+ # If test is not a shell built-in, we'll probably end up computing a
-+ # maximum length that is only half of the actual maximum length, but
-+ # we can't tell.
-+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-+ while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
-+ = "XX$teststring") >/dev/null 2>&1 &&
-+ new_result=`expr "X$teststring" : ".*" 2>&1` &&
-+ lt_cv_sys_max_cmd_len=$new_result &&
-+ test $i != 17 # 1/2 MB should be enough
-+ do
-+ i=`expr $i + 1`
-+ teststring=$teststring$teststring
-+ done
-+ teststring=
-+ # Add a significant safety factor because C++ compilers can tack on massive
-+ # amounts of additional arguments before passing them to the linker.
-+ # It appears as though 1/2 is a usable value.
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-+ ;;
-+ esac
-+])
-+if test -n $lt_cv_sys_max_cmd_len ; then
-+ AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-+else
-+ AC_MSG_RESULT(none)
-+fi
-+])# AC_LIBTOOL_SYS_MAX_CMD_LEN
-+
-+
-+# _LT_AC_CHECK_DLFCN
-+# ------------------
-+AC_DEFUN([_LT_AC_CHECK_DLFCN],
-+[AC_CHECK_HEADERS(dlfcn.h)dnl
-+])# _LT_AC_CHECK_DLFCN
-+
-+
-+# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-+# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-+# ---------------------------------------------------------------------
-+AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-+[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-+if test "$cross_compiling" = yes; then :
-+ [$4]
-+else
-+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-+ lt_status=$lt_dlunknown
-+ cat > conftest.$ac_ext <<EOF
-+[#line __oline__ "configure"
-+#include "confdefs.h"
-+
-+#if HAVE_DLFCN_H
-+#include <dlfcn.h>
-+#endif
-+
-+#include <stdio.h>
-+
-+#ifdef RTLD_GLOBAL
-+# define LT_DLGLOBAL RTLD_GLOBAL
-+#else
-+# ifdef DL_GLOBAL
-+# define LT_DLGLOBAL DL_GLOBAL
-+# else
-+# define LT_DLGLOBAL 0
-+# endif
-+#endif
-+
-+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-+ find out it does not work in some platform. */
-+#ifndef LT_DLLAZY_OR_NOW
-+# ifdef RTLD_LAZY
-+# define LT_DLLAZY_OR_NOW RTLD_LAZY
-+# else
-+# ifdef DL_LAZY
-+# define LT_DLLAZY_OR_NOW DL_LAZY
-+# else
-+# ifdef RTLD_NOW
-+# define LT_DLLAZY_OR_NOW RTLD_NOW
-+# else
-+# ifdef DL_NOW
-+# define LT_DLLAZY_OR_NOW DL_NOW
-+# else
-+# define LT_DLLAZY_OR_NOW 0
-+# endif
-+# endif
-+# endif
-+# endif
-+#endif
-+
-+#ifdef __cplusplus
-+extern "C" void exit (int);
-+#endif
-+
-+void fnord() { int i=42;}
-+int main ()
-+{
-+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-+ int status = $lt_dlunknown;
-+
-+ if (self)
-+ {
-+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
-+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-+ /* dlclose (self); */
-+ }
-+ else
-+ puts (dlerror ());
-+
-+ exit (status);
-+}]
-+EOF
-+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-+ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
-+ lt_status=$?
-+ case x$lt_status in
-+ x$lt_dlno_uscore) $1 ;;
-+ x$lt_dlneed_uscore) $2 ;;
-+ x$lt_dlunknown|x*) $3 ;;
-+ esac
-+ else :
-+ # compilation failed
-+ $3
-+ fi
-+fi
-+rm -fr conftest*
-+])# _LT_AC_TRY_DLOPEN_SELF
-+
-+
-+# AC_LIBTOOL_DLOPEN_SELF
-+# ----------------------
-+AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-+[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-+if test "x$enable_dlopen" != xyes; then
-+ enable_dlopen=unknown
-+ enable_dlopen_self=unknown
-+ enable_dlopen_self_static=unknown
-+else
-+ lt_cv_dlopen=no
-+ lt_cv_dlopen_libs=
-+
-+ case $host_os in
-+ beos*)
-+ lt_cv_dlopen="load_add_on"
-+ lt_cv_dlopen_libs=
-+ lt_cv_dlopen_self=yes
-+ ;;
-+
-+ mingw* | pw32*)
-+ lt_cv_dlopen="LoadLibrary"
-+ lt_cv_dlopen_libs=
-+ ;;
-+
-+ cygwin*)
-+ lt_cv_dlopen="dlopen"
-+ lt_cv_dlopen_libs=
-+ ;;
-+
-+ darwin*)
-+ # if libdl is installed we need to link against it
-+ AC_CHECK_LIB([dl], [dlopen],
-+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-+ lt_cv_dlopen="dyld"
-+ lt_cv_dlopen_libs=
-+ lt_cv_dlopen_self=yes
-+ ])
-+ ;;
-+
-+ *)
-+ AC_CHECK_FUNC([shl_load],
-+ [lt_cv_dlopen="shl_load"],
-+ [AC_CHECK_LIB([dld], [shl_load],
-+ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-+ [AC_CHECK_FUNC([dlopen],
-+ [lt_cv_dlopen="dlopen"],
-+ [AC_CHECK_LIB([dl], [dlopen],
-+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-+ [AC_CHECK_LIB([svld], [dlopen],
-+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-+ [AC_CHECK_LIB([dld], [dld_link],
-+ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-+ ])
-+ ])
-+ ])
-+ ])
-+ ])
-+ ;;
-+ esac
-+
-+ if test "x$lt_cv_dlopen" != xno; then
-+ enable_dlopen=yes
-+ else
-+ enable_dlopen=no
-+ fi
-+
-+ case $lt_cv_dlopen in
-+ dlopen)
-+ save_CPPFLAGS="$CPPFLAGS"
-+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-+
-+ save_LDFLAGS="$LDFLAGS"
-+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-+
-+ save_LIBS="$LIBS"
-+ LIBS="$lt_cv_dlopen_libs $LIBS"
-+
-+ AC_CACHE_CHECK([whether a program can dlopen itself],
-+ lt_cv_dlopen_self, [dnl
-+ _LT_AC_TRY_DLOPEN_SELF(
-+ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-+ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-+ ])
-+
-+ if test "x$lt_cv_dlopen_self" = xyes; then
-+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-+ AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-+ lt_cv_dlopen_self_static, [dnl
-+ _LT_AC_TRY_DLOPEN_SELF(
-+ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-+ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
-+ ])
-+ fi
-+
-+ CPPFLAGS="$save_CPPFLAGS"
-+ LDFLAGS="$save_LDFLAGS"
-+ LIBS="$save_LIBS"
-+ ;;
-+ esac
-+
-+ case $lt_cv_dlopen_self in
-+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-+ *) enable_dlopen_self=unknown ;;
-+ esac
-+
-+ case $lt_cv_dlopen_self_static in
-+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-+ *) enable_dlopen_self_static=unknown ;;
-+ esac
-+fi
-+])# AC_LIBTOOL_DLOPEN_SELF
-+
-+
-+# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
-+# ---------------------------------
-+# Check to see if options -c and -o are simultaneously supported by compiler
-+AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-+[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-+ [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-+ [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-+ $rm -r conftest 2>/dev/null
-+ mkdir conftest
-+ cd conftest
-+ mkdir out
-+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ lt_compiler_flag="-o out/conftest2.$ac_objext"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-+ (eval "$lt_compile" 2>out/conftest.err)
-+ ac_status=$?
-+ cat out/conftest.err >&AS_MESSAGE_LOG_FD
-+ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+ then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+ _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-+ fi
-+ fi
-+ chmod u+w . 2>&AS_MESSAGE_LOG_FD
-+ $rm conftest*
-+ # SGI C++ compiler will create directory out/ii_files/ for
-+ # template instantiation
-+ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+ $rm out/* && rmdir out
-+ cd ..
-+ rmdir conftest
-+ $rm conftest*
-+])
-+])# AC_LIBTOOL_PROG_CC_C_O
-+
-+
-+# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
-+# -----------------------------------------
-+# Check to see if we can do hard links to lock some files if needed
-+AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
-+[AC_REQUIRE([_LT_AC_LOCK])dnl
-+
-+hard_links="nottested"
-+if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-+ # do not overwrite the value of need_locks provided by the user
-+ AC_MSG_CHECKING([if we can lock with hard links])
-+ hard_links=yes
-+ $rm conftest*
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ touch conftest.a
-+ ln conftest.a conftest.b 2>&5 || hard_links=no
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ AC_MSG_RESULT([$hard_links])
-+ if test "$hard_links" = no; then
-+ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-+ need_locks=warn
-+ fi
-+else
-+ need_locks=no
-+fi
-+])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
-+
-+
-+# AC_LIBTOOL_OBJDIR
-+# -----------------
-+AC_DEFUN([AC_LIBTOOL_OBJDIR],
-+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-+[rm -f .libs 2>/dev/null
-+mkdir .libs 2>/dev/null
-+if test -d .libs; then
-+ lt_cv_objdir=.libs
-+else
-+ # MS-DOS does not allow filenames that begin with a dot.
-+ lt_cv_objdir=_libs
-+fi
-+rmdir .libs 2>/dev/null])
-+objdir=$lt_cv_objdir
-+])# AC_LIBTOOL_OBJDIR
-+
-+
-+# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
-+# ----------------------------------------------
-+# Check hardcoding attributes.
-+AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
-+[AC_MSG_CHECKING([how to hardcode library paths into programs])
-+_LT_AC_TAGVAR(hardcode_action, $1)=
-+if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-+ test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
-+ test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
-+
-+ # We can hardcode non-existant directories.
-+ if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+ # have to relink, otherwise we might link with an installed library
-+ # when we should be linking with a yet-to-be-installed one
-+ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-+ test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
-+ # Linking always hardcodes the temporary library directory.
-+ _LT_AC_TAGVAR(hardcode_action, $1)=relink
-+ else
-+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+ _LT_AC_TAGVAR(hardcode_action, $1)=immediate
-+ fi
-+else
-+ # We cannot hardcode anything, or else we can only hardcode existing
-+ # directories.
-+ _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
-+fi
-+AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
-+
-+if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
-+ # Fast installation is not supported
-+ enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+ test "$enable_shared" = no; then
-+ # Fast installation is not necessary
-+ enable_fast_install=needless
-+fi
-+])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
-+
-+
-+# AC_LIBTOOL_SYS_LIB_STRIP
-+# ------------------------
-+AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
-+[striplib=
-+old_striplib=
-+AC_MSG_CHECKING([whether stripping libraries is possible])
-+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-+ AC_MSG_RESULT([yes])
-+else
-+# FIXME - insert some real tests, host_os isn't really good enough
-+ case $host_os in
-+ darwin*)
-+ if test -n "$STRIP" ; then
-+ striplib="$STRIP -x"
-+ AC_MSG_RESULT([yes])
-+ else
-+ AC_MSG_RESULT([no])
-+fi
-+ ;;
-+ *)
-+ AC_MSG_RESULT([no])
-+ ;;
-+ esac
-+fi
-+])# AC_LIBTOOL_SYS_LIB_STRIP
-+
-+
-+# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-+# -----------------------------
-+# PORTME Fill in your ld.so characteristics
-+AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-+[AC_MSG_CHECKING([dynamic linker characteristics])
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+if test "$GCC" = yes; then
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-+ # if the path contains ";" then we assume it to be the separator
-+ # otherwise default to the standard path separator (i.e. ":") - it is
-+ # assumed that no part of a normal pathname contains ";" but that should
-+ # okay in the real world where ";" in dirpaths is itself problematic.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+else
-+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-+fi
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+ shlibpath_var=LIBPATH
-+
-+ # AIX 3 has no versioning support, so we append a major version to the name.
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+
-+aix4* | aix5*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ hardcode_into_libs=yes
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 supports IA64
-+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ else
-+ # With GCC up to 2.95.x, collect2 would create an import file
-+ # for dependence libraries. The import file would start with
-+ # the line `#! .'. This would cause the generated library to
-+ # depend on `.', always an invalid library. This was fixed in
-+ # development snapshots of GCC prior to 3.0.
-+ case $host_os in
-+ aix4 | aix4.[[01]] | aix4.[[01]].*)
-+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+ echo ' yes '
-+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+ :
-+ else
-+ can_build_shared=no
-+ fi
-+ ;;
-+ esac
-+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+ # soname into executable. Probably we can add versioning support to
-+ # collect2, so additional links can be useful in future.
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+ # instead of lib<name>.a to let people know that these are not
-+ # typical AIX shared libraries.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ else
-+ # We preserve .a as extension for shared libraries through AIX4.2
-+ # and later when we are not doing run time linking.
-+ library_names_spec='${libname}${release}.a $libname.a'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ fi
-+ shlibpath_var=LIBPATH
-+ fi
-+ ;;
-+
-+amigaos*)
-+ library_names_spec='$libname.ixlibrary $libname.a'
-+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+ ;;
-+
-+beos*)
-+ library_names_spec='${libname}${shared_ext}'
-+ dynamic_linker="$host_os ld.so"
-+ shlibpath_var=LIBRARY_PATH
-+ ;;
-+
-+bsdi[[45]]*)
-+ version_type=linux
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+ # the default ld.so.conf also contains /usr/contrib/lib and
-+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+ # libtool to hard-code these into programs
-+ ;;
-+
-+cygwin* | mingw* | pw32*)
-+ version_type=windows
-+ shrext_cmds=".dll"
-+ need_version=no
-+ need_lib_prefix=no
-+
-+ case $GCC,$host_os in
-+ yes,cygwin* | yes,mingw* | yes,pw32*)
-+ library_names_spec='$libname.dll.a'
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname~
-+ chmod a+x \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $rm \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+
-+ case $host_os in
-+ cygwin*)
-+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+ ;;
-+ mingw*)
-+ # MinGW DLLs use traditional 'lib' prefix
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
-+ # It is most probably a Windows format PATH printed by
-+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+ # path with ; separators, and with drive letters. We can handle the
-+ # drive letters (cygwin fileutils understands them), so leave them,
-+ # especially as we might pass files found there to a mingw objdump,
-+ # which wouldn't understand a cygwinified path. Ahh.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ ;;
-+ pw32*)
-+ # pw32 DLLs use 'pw' prefix rather than 'lib'
-+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ ;;
-+ esac
-+ dynamic_linker='Win32 ld.exe'
-+ # FIXME: first we should search . and the directory the executable is in
-+ shlibpath_var=PATH
-+ ;;
-+
-+darwin* | rhapsody*)
-+ dynamic_linker="$host_os dyld"
-+ version_type=darwin
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+ soname_spec='${libname}${release}${major}$shared_ext'
-+ shlibpath_overrides_runpath=yes
-+ shlibpath_var=DYLD_LIBRARY_PATH
-+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-+ if test "$GCC" = yes; then
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-+ else
-+ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
-+ fi
-+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+ ;;
-+
-+dgux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+freebsd1*)
-+ dynamic_linker=no
-+ ;;
-+
-+kfreebsd*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='GNU ld.so'
-+ ;;
-+
-+freebsd* | dragonfly*)
-+ # DragonFly does not have aout. When/if they implement a new
-+ # versioning mechanism, adjust this.
-+ if test -x /usr/bin/objformat; then
-+ objformat=`/usr/bin/objformat`
-+ else
-+ case $host_os in
-+ freebsd[[123]]*) objformat=aout ;;
-+ *) objformat=elf ;;
-+ esac
-+ fi
-+ version_type=freebsd-$objformat
-+ case $version_type in
-+ freebsd-elf*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ need_version=no
-+ need_lib_prefix=no
-+ ;;
-+ freebsd-*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+ need_version=yes
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_os in
-+ freebsd2*)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ freebsd3.[[01]]* | freebsdelf3.[[01]]*)
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
-+ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+ freebsd*) # from 4.6 on
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ esac
-+ ;;
-+
-+gnu*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+ # Give a soname corresponding to the major version so that dld.sl refuses to
-+ # link against other versions.
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ case $host_cpu in
-+ ia64*)
-+ shrext_cmds='.so'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.so"
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ if test "X$HPUX_IA64_MODE" = X32; then
-+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+ else
-+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+ fi
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ hppa*64*)
-+ shrext_cmds='.sl'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ *)
-+ shrext_cmds='.sl'
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=SHLIB_PATH
-+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+ esac
-+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+ postinstall_cmds='chmod 555 $lib'
-+ ;;
-+
-+interix3*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $host_os in
-+ nonstopux*) version_type=nonstopux ;;
-+ *)
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ version_type=linux
-+ else
-+ version_type=irix
-+ fi ;;
-+ esac
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ case $host_os in
-+ irix5* | nonstopux*)
-+ libsuff= shlibsuff=
-+ ;;
-+ *)
-+ case $LD in # libtool.m4 will add one of these switches to LD
-+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+ libsuff= shlibsuff= libmagic=32-bit;;
-+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+ libsuff=32 shlibsuff=N32 libmagic=N32;;
-+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+ *) libsuff= shlibsuff= libmagic=never-match;;
-+ esac
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+ hardcode_into_libs=yes
-+ ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+ dynamic_linker=no
-+ ;;
-+
-+# This must be Linux ELF.
-+linux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ # This implies no fast_install, which is unacceptable.
-+ # Some rework will be needed to allow for fast_install
-+ # before this can be enabled.
-+ hardcode_into_libs=yes
-+
-+ # Append ld.so.conf contents to the search path
-+ if test -f /etc/ld.so.conf; then
-+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+ fi
-+
-+ # We used to test for /lib/ld.so.1 and disable shared libraries on
-+ # powerpc, because MkLinux only supported shared libraries with the
-+ # GNU dynamic linker. Since this was broken with cross compilers,
-+ # most powerpc-linux boxes support dynamic linking these days and
-+ # people can always --disable-shared, the test was removed, and we
-+ # assume the GNU/Linux dynamic linker is in use.
-+ dynamic_linker='GNU/Linux ld.so'
-+ ;;
-+
-+netbsdelf*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='NetBSD ld.elf_so'
-+ ;;
-+
-+knetbsd*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='GNU ld.so'
-+ ;;
-+
-+netbsd*)
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ dynamic_linker='NetBSD (a.out) ld.so'
-+ else
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='NetBSD ld.elf_so'
-+ fi
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+
-+newsos6)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+nto-qnx*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+openbsd*)
-+ version_type=sunos
-+ sys_lib_dlsearch_path_spec="/usr/lib"
-+ need_lib_prefix=no
-+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+ case $host_os in
-+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+ *) need_version=no ;;
-+ esac
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ case $host_os in
-+ openbsd2.[[89]] | openbsd2.[[89]].*)
-+ shlibpath_overrides_runpath=no
-+ ;;
-+ *)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ esac
-+ else
-+ shlibpath_overrides_runpath=yes
-+ fi
-+ ;;
-+
-+os2*)
-+ libname_spec='$name'
-+ shrext_cmds=".dll"
-+ need_lib_prefix=no
-+ library_names_spec='$libname${shared_ext} $libname.a'
-+ dynamic_linker='OS/2 ld.exe'
-+ shlibpath_var=LIBPATH
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ version_type=osf
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+ ;;
-+
-+solaris*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ # ldd complains unless libraries are executable
-+ postinstall_cmds='chmod +x $lib'
-+ ;;
-+
-+sunos4*)
-+ version_type=sunos
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ if test "$with_gnu_ld" = yes; then
-+ need_lib_prefix=no
-+ fi
-+ need_version=yes
-+ ;;
-+
-+sysv4 | sysv4.3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_vendor in
-+ sni)
-+ shlibpath_overrides_runpath=no
-+ need_lib_prefix=no
-+ export_dynamic_flag_spec='${wl}-Blargedynsym'
-+ runpath_var=LD_RUN_PATH
-+ ;;
-+ siemens)
-+ need_lib_prefix=no
-+ ;;
-+ motorola)
-+ need_lib_prefix=no
-+ need_version=no
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+ ;;
-+ esac
-+ ;;
-+
-+sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ version_type=linux
-+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+ soname_spec='$libname${shared_ext}.$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ fi
-+ ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+ version_type=freebsd-elf
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ if test "$with_gnu_ld" = yes; then
-+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+ shlibpath_overrides_runpath=no
-+ else
-+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+ shlibpath_overrides_runpath=yes
-+ case $host_os in
-+ sco3.2v5*)
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+ ;;
-+ esac
-+ fi
-+ sys_lib_dlsearch_path_spec='/usr/lib'
-+ ;;
-+
-+uts4*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+*)
-+ dynamic_linker=no
-+ ;;
-+esac
-+AC_MSG_RESULT([$dynamic_linker])
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-+
-+
-+# _LT_AC_TAGCONFIG
-+# ----------------
-+AC_DEFUN([_LT_AC_TAGCONFIG],
-+[AC_ARG_WITH([tags],
-+ [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-+ [include additional configurations @<:@automatic@:>@])],
-+ [tagnames="$withval"])
-+
-+if test -f "$ltmain" && test -n "$tagnames"; then
-+ if test ! -f "${ofile}"; then
-+ AC_MSG_WARN([output file `$ofile' does not exist])
-+ fi
-+
-+ if test -z "$LTCC"; then
-+ eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-+ if test -z "$LTCC"; then
-+ AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-+ else
-+ AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-+ fi
-+ fi
-+ if test -z "$LTCFLAGS"; then
-+ eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
-+ fi
-+
-+ # Extract list of available tagged configurations in $ofile.
-+ # Note that this assumes the entire list is on one line.
-+ available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-+
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for tagname in $tagnames; do
-+ IFS="$lt_save_ifs"
-+ # Check whether tagname contains only valid characters
-+ case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-+ "") ;;
-+ *) AC_MSG_ERROR([invalid tag name: $tagname])
-+ ;;
-+ esac
-+
-+ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-+ then
-+ AC_MSG_ERROR([tag name \"$tagname\" already exists])
-+ fi
-+
-+ # Update the list of available tags.
-+ if test -n "$tagname"; then
-+ echo appending configuration tag \"$tagname\" to $ofile
-+
-+ case $tagname in
-+ CXX)
-+ if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-+ (test "X$CXX" != "Xg++"))) ; then
-+ AC_LIBTOOL_LANG_CXX_CONFIG
-+ else
-+ tagname=""
-+ fi
-+ ;;
-+
-+ F77)
-+ if test -n "$F77" && test "X$F77" != "Xno"; then
-+ AC_LIBTOOL_LANG_F77_CONFIG
-+ else
-+ tagname=""
-+ fi
-+ ;;
-+
-+ GCJ)
-+ if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-+ AC_LIBTOOL_LANG_GCJ_CONFIG
-+ else
-+ tagname=""
-+ fi
-+ ;;
-+
-+ RC)
-+ AC_LIBTOOL_LANG_RC_CONFIG
-+ ;;
-+
-+ *)
-+ AC_MSG_ERROR([Unsupported tag name: $tagname])
-+ ;;
-+ esac
-+
-+ # Append the new tag name to the list of available tags.
-+ if test -n "$tagname" ; then
-+ available_tags="$available_tags $tagname"
-+ fi
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+
-+ # Now substitute the updated list of available tags.
-+ if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-+ mv "${ofile}T" "$ofile"
-+ chmod +x "$ofile"
-+ else
-+ rm -f "${ofile}T"
-+ AC_MSG_ERROR([unable to update list of available tagged configurations.])
-+ fi
-+fi
-+])# _LT_AC_TAGCONFIG
-+
-+
-+# AC_LIBTOOL_DLOPEN
-+# -----------------
-+# enable checks for dlopen support
-+AC_DEFUN([AC_LIBTOOL_DLOPEN],
-+ [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-+])# AC_LIBTOOL_DLOPEN
-+
-+
-+# AC_LIBTOOL_WIN32_DLL
-+# --------------------
-+# declare package support for building win32 DLLs
-+AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
-+[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-+])# AC_LIBTOOL_WIN32_DLL
-+
-+
-+# AC_ENABLE_SHARED([DEFAULT])
-+# ---------------------------
-+# implement the --enable-shared flag
-+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-+AC_DEFUN([AC_ENABLE_SHARED],
-+[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-+AC_ARG_ENABLE([shared],
-+ [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-+ [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-+ [p=${PACKAGE-default}
-+ case $enableval in
-+ yes) enable_shared=yes ;;
-+ no) enable_shared=no ;;
-+ *)
-+ enable_shared=no
-+ # Look at the argument we got. We use all the common list separators.
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for pkg in $enableval; do
-+ IFS="$lt_save_ifs"
-+ if test "X$pkg" = "X$p"; then
-+ enable_shared=yes
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ ;;
-+ esac],
-+ [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-+])# AC_ENABLE_SHARED
-+
-+
-+# AC_DISABLE_SHARED
-+# -----------------
-+# set the default shared flag to --disable-shared
-+AC_DEFUN([AC_DISABLE_SHARED],
-+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-+AC_ENABLE_SHARED(no)
-+])# AC_DISABLE_SHARED
-+
-+
-+# AC_ENABLE_STATIC([DEFAULT])
-+# ---------------------------
-+# implement the --enable-static flag
-+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-+AC_DEFUN([AC_ENABLE_STATIC],
-+[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-+AC_ARG_ENABLE([static],
-+ [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-+ [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-+ [p=${PACKAGE-default}
-+ case $enableval in
-+ yes) enable_static=yes ;;
-+ no) enable_static=no ;;
-+ *)
-+ enable_static=no
-+ # Look at the argument we got. We use all the common list separators.
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for pkg in $enableval; do
-+ IFS="$lt_save_ifs"
-+ if test "X$pkg" = "X$p"; then
-+ enable_static=yes
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ ;;
-+ esac],
-+ [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-+])# AC_ENABLE_STATIC
-+
-+
-+# AC_DISABLE_STATIC
-+# -----------------
-+# set the default static flag to --disable-static
-+AC_DEFUN([AC_DISABLE_STATIC],
-+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-+AC_ENABLE_STATIC(no)
-+])# AC_DISABLE_STATIC
-+
-+
-+# AC_ENABLE_FAST_INSTALL([DEFAULT])
-+# ---------------------------------
-+# implement the --enable-fast-install flag
-+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-+AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-+[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-+AC_ARG_ENABLE([fast-install],
-+ [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-+ [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-+ [p=${PACKAGE-default}
-+ case $enableval in
-+ yes) enable_fast_install=yes ;;
-+ no) enable_fast_install=no ;;
-+ *)
-+ enable_fast_install=no
-+ # Look at the argument we got. We use all the common list separators.
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for pkg in $enableval; do
-+ IFS="$lt_save_ifs"
-+ if test "X$pkg" = "X$p"; then
-+ enable_fast_install=yes
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ ;;
-+ esac],
-+ [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-+])# AC_ENABLE_FAST_INSTALL
-+
-+
-+# AC_DISABLE_FAST_INSTALL
-+# -----------------------
-+# set the default to --disable-fast-install
-+AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-+AC_ENABLE_FAST_INSTALL(no)
-+])# AC_DISABLE_FAST_INSTALL
-+
-+
-+# AC_LIBTOOL_PICMODE([MODE])
-+# --------------------------
-+# implement the --with-pic flag
-+# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
-+AC_DEFUN([AC_LIBTOOL_PICMODE],
-+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-+pic_mode=ifelse($#,1,$1,default)
-+])# AC_LIBTOOL_PICMODE
-+
-+
-+# AC_PROG_EGREP
-+# -------------
-+# This is predefined starting with Autoconf 2.54, so this conditional
-+# definition can be removed once we require Autoconf 2.54 or later.
-+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
-+[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
-+ [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-+ then ac_cv_prog_egrep='grep -E'
-+ else ac_cv_prog_egrep='egrep'
-+ fi])
-+ EGREP=$ac_cv_prog_egrep
-+ AC_SUBST([EGREP])
-+])])
-+
-+
-+# AC_PATH_TOOL_PREFIX
-+# -------------------
-+# find a file program which can recognise shared library
-+AC_DEFUN([AC_PATH_TOOL_PREFIX],
-+[AC_REQUIRE([AC_PROG_EGREP])dnl
-+AC_MSG_CHECKING([for $1])
-+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-+[case $MAGIC_CMD in
-+[[\\/*] | ?:[\\/]*])
-+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-+ ;;
-+*)
-+ lt_save_MAGIC_CMD="$MAGIC_CMD"
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+dnl $ac_dummy forces splitting on constant user-supplied paths.
-+dnl POSIX.2 word splitting is done only on the output of word expansions,
-+dnl not every word. This closes a longstanding sh security hole.
-+ ac_dummy="ifelse([$2], , $PATH, [$2])"
-+ for ac_dir in $ac_dummy; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f $ac_dir/$1; then
-+ lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-+ if test -n "$file_magic_test_file"; then
-+ case $deplibs_check_method in
-+ "file_magic "*)
-+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-+ $EGREP "$file_magic_regex" > /dev/null; then
-+ :
-+ else
-+ cat <<EOF 1>&2
-+
-+*** Warning: the command libtool uses to detect shared libraries,
-+*** $file_magic_cmd, produces output that libtool cannot recognize.
-+*** The result is that libtool may fail to recognize shared libraries
-+*** as such. This will affect the creation of libtool libraries that
-+*** depend on shared libraries, but programs linked with such libtool
-+*** libraries will work regardless of this problem. Nevertheless, you
-+*** may want to report the problem to your system manager and/or to
-+*** bug-libtool at gnu.org
-+
-+EOF
-+ fi ;;
-+ esac
-+ fi
-+ break
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ MAGIC_CMD="$lt_save_MAGIC_CMD"
-+ ;;
-+esac])
-+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+if test -n "$MAGIC_CMD"; then
-+ AC_MSG_RESULT($MAGIC_CMD)
-+else
-+ AC_MSG_RESULT(no)
-+fi
-+])# AC_PATH_TOOL_PREFIX
-+
-+
-+# AC_PATH_MAGIC
-+# -------------
-+# find a file program which can recognise a shared library
-+AC_DEFUN([AC_PATH_MAGIC],
-+[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-+if test -z "$lt_cv_path_MAGIC_CMD"; then
-+ if test -n "$ac_tool_prefix"; then
-+ AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-+ else
-+ MAGIC_CMD=:
-+ fi
-+fi
-+])# AC_PATH_MAGIC
-+
-+
-+# AC_PROG_LD
-+# ----------
-+# find the pathname to the GNU or non-GNU linker
-+AC_DEFUN([AC_PROG_LD],
-+[AC_ARG_WITH([gnu-ld],
-+ [AC_HELP_STRING([--with-gnu-ld],
-+ [assume the C compiler uses GNU ld @<:@default=no@:>@])],
-+ [test "$withval" = no || with_gnu_ld=yes],
-+ [with_gnu_ld=no])
-+AC_REQUIRE([LT_AC_PROG_SED])dnl
-+AC_REQUIRE([AC_PROG_CC])dnl
-+AC_REQUIRE([AC_CANONICAL_HOST])dnl
-+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-+ac_prog=ld
-+if test "$GCC" = yes; then
-+ # Check if gcc -print-prog-name=ld gives a path.
-+ AC_MSG_CHECKING([for ld used by $CC])
-+ case $host in
-+ *-*-mingw*)
-+ # gcc leaves a trailing carriage return which upsets mingw
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-+ *)
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-+ esac
-+ case $ac_prog in
-+ # Accept absolute paths.
-+ [[\\/]]* | ?:[[\\/]]*)
-+ re_direlt='/[[^/]][[^/]]*/\.\./'
-+ # Canonicalize the pathname of ld
-+ ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-+ ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-+ done
-+ test -z "$LD" && LD="$ac_prog"
-+ ;;
-+ "")
-+ # If it fails, then pretend we aren't using GCC.
-+ ac_prog=ld
-+ ;;
-+ *)
-+ # If it is relative, then search for the first ld in PATH.
-+ with_gnu_ld=unknown
-+ ;;
-+ esac
-+elif test "$with_gnu_ld" = yes; then
-+ AC_MSG_CHECKING([for GNU ld])
-+else
-+ AC_MSG_CHECKING([for non-GNU ld])
-+fi
-+AC_CACHE_VAL(lt_cv_path_LD,
-+[if test -z "$LD"; then
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for ac_dir in $PATH; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-+ lt_cv_path_LD="$ac_dir/$ac_prog"
-+ # Check to see if the program is GNU ld. I'd rather use --version,
-+ # but apparently some variants of GNU ld only accept -v.
-+ # Break only if it was the GNU/non-GNU ld that we prefer.
-+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-+ *GNU* | *'with BFD'*)
-+ test "$with_gnu_ld" != no && break
-+ ;;
-+ *)
-+ test "$with_gnu_ld" != yes && break
-+ ;;
-+ esac
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+else
-+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
-+fi])
-+LD="$lt_cv_path_LD"
-+if test -n "$LD"; then
-+ AC_MSG_RESULT($LD)
-+else
-+ AC_MSG_RESULT(no)
-+fi
-+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-+AC_PROG_LD_GNU
-+])# AC_PROG_LD
-+
-+
-+# AC_PROG_LD_GNU
-+# --------------
-+AC_DEFUN([AC_PROG_LD_GNU],
-+[AC_REQUIRE([AC_PROG_EGREP])dnl
-+AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
-+case `$LD -v 2>&1 </dev/null` in
-+*GNU* | *'with BFD'*)
-+ lt_cv_prog_gnu_ld=yes
-+ ;;
-+*)
-+ lt_cv_prog_gnu_ld=no
-+ ;;
-+esac])
-+with_gnu_ld=$lt_cv_prog_gnu_ld
-+])# AC_PROG_LD_GNU
-+
-+
-+# AC_PROG_LD_RELOAD_FLAG
-+# ----------------------
-+# find reload flag for linker
-+# -- PORTME Some linkers may need a different reload flag.
-+AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-+[AC_CACHE_CHECK([for $LD option to reload object files],
-+ lt_cv_ld_reload_flag,
-+ [lt_cv_ld_reload_flag='-r'])
-+reload_flag=$lt_cv_ld_reload_flag
-+case $reload_flag in
-+"" | " "*) ;;
-+*) reload_flag=" $reload_flag" ;;
-+esac
-+reload_cmds='$LD$reload_flag -o $output$reload_objs'
-+case $host_os in
-+ darwin*)
-+ if test "$GCC" = yes; then
-+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-+ else
-+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
-+ fi
-+ ;;
-+esac
-+])# AC_PROG_LD_RELOAD_FLAG
-+
-+
-+# AC_DEPLIBS_CHECK_METHOD
-+# -----------------------
-+# how to check for library dependencies
-+# -- PORTME fill in with the dynamic library characteristics
-+AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-+[AC_CACHE_CHECK([how to recognise dependent libraries],
-+lt_cv_deplibs_check_method,
-+[lt_cv_file_magic_cmd='$MAGIC_CMD'
-+lt_cv_file_magic_test_file=
-+lt_cv_deplibs_check_method='unknown'
-+# Need to set the preceding variable on all platforms that support
-+# interlibrary dependencies.
-+# 'none' -- dependencies not supported.
-+# `unknown' -- same as none, but documents that we really don't know.
-+# 'pass_all' -- all dependencies passed with no checks.
-+# 'test_compile' -- check by making test program.
-+# 'file_magic [[regex]]' -- check by looking for files in library path
-+# which responds to the $file_magic_cmd with a given extended regex.
-+# If you have `file' or equivalent on your system and you're not sure
-+# whether `pass_all' will *always* work, you probably want this one.
-+
-+case $host_os in
-+aix4* | aix5*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+beos*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+bsdi[[45]]*)
-+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-+ lt_cv_file_magic_cmd='/usr/bin/file -L'
-+ lt_cv_file_magic_test_file=/shlib/libc.so
-+ ;;
-+
-+cygwin*)
-+ # func_win32_libid is a shell function defined in ltmain.sh
-+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-+ lt_cv_file_magic_cmd='func_win32_libid'
-+ ;;
-+
-+mingw* | pw32*)
-+ # Base MSYS/MinGW do not provide the 'file' command needed by
-+ # func_win32_libid shell function, so use a weaker test based on 'objdump'.
-+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-+ lt_cv_file_magic_cmd='$OBJDUMP -f'
-+ ;;
-+
-+darwin* | rhapsody*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+freebsd* | kfreebsd*-gnu | dragonfly*)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-+ case $host_cpu in
-+ i*86 )
-+ # Not sure whether the presence of OpenBSD here was a mistake.
-+ # Let's accept both of them until this is cleared up.
-+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-+ ;;
-+ esac
-+ else
-+ lt_cv_deplibs_check_method=pass_all
-+ fi
-+ ;;
-+
-+gnu*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+hpux10.20* | hpux11*)
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ case $host_cpu in
-+ ia64*)
-+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-+ ;;
-+ hppa*64*)
-+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
-+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-+ ;;
-+ *)
-+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
-+ ;;
-+ esac
-+ ;;
-+
-+interix3*)
-+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $LD in
-+ *-32|*"-32 ") libmagic=32-bit;;
-+ *-n32|*"-n32 ") libmagic=N32;;
-+ *-64|*"-64 ") libmagic=64-bit;;
-+ *) libmagic=never-match;;
-+ esac
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+# This must be Linux ELF.
-+linux*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-+ else
-+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-+ fi
-+ ;;
-+
-+newos6*)
-+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
-+ ;;
-+
-+nto-qnx*)
-+ lt_cv_deplibs_check_method=unknown
-+ ;;
-+
-+openbsd*)
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
-+ else
-+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-+ fi
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+solaris*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+sysv4 | sysv4.3*)
-+ case $host_vendor in
-+ motorola)
-+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-+ ;;
-+ ncr)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+ sequent)
-+ lt_cv_file_magic_cmd='/bin/file'
-+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-+ ;;
-+ sni)
-+ lt_cv_file_magic_cmd='/bin/file'
-+ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-+ lt_cv_file_magic_test_file=/lib/libc.so
-+ ;;
-+ siemens)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+ pc)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+ esac
-+ ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+esac
-+])
-+file_magic_cmd=$lt_cv_file_magic_cmd
-+deplibs_check_method=$lt_cv_deplibs_check_method
-+test -z "$deplibs_check_method" && deplibs_check_method=unknown
-+])# AC_DEPLIBS_CHECK_METHOD
-+
-+
-+# AC_PROG_NM
-+# ----------
-+# find the pathname to a BSD-compatible name lister
-+AC_DEFUN([AC_PROG_NM],
-+[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
-+[if test -n "$NM"; then
-+ # Let the user override the test.
-+ lt_cv_path_NM="$NM"
-+else
-+ lt_nm_to_check="${ac_tool_prefix}nm"
-+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-+ lt_nm_to_check="$lt_nm_to_check nm"
-+ fi
-+ for lt_tmp_nm in $lt_nm_to_check; do
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ tmp_nm="$ac_dir/$lt_tmp_nm"
-+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-+ # Check to see if the nm accepts a BSD-compat flag.
-+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-+ # nm: unknown option "B" ignored
-+ # Tru64's nm complains that /dev/null is an invalid object file
-+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-+ */dev/null* | *'Invalid file or object type'*)
-+ lt_cv_path_NM="$tmp_nm -B"
-+ break
-+ ;;
-+ *)
-+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-+ */dev/null*)
-+ lt_cv_path_NM="$tmp_nm -p"
-+ break
-+ ;;
-+ *)
-+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-+ continue # so that we can try to find one that supports BSD flags
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ done
-+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-+fi])
-+NM="$lt_cv_path_NM"
-+])# AC_PROG_NM
-+
-+
-+# AC_CHECK_LIBM
-+# -------------
-+# check for math library
-+AC_DEFUN([AC_CHECK_LIBM],
-+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-+LIBM=
-+case $host in
-+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
-+ # These system don't have libm, or don't need it
-+ ;;
-+*-ncr-sysv4.3*)
-+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-+ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-+ ;;
-+*)
-+ AC_CHECK_LIB(m, cos, LIBM="-lm")
-+ ;;
-+esac
-+])# AC_CHECK_LIBM
-+
-+
-+# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
-+# -----------------------------------
-+# sets LIBLTDL to the link flags for the libltdl convenience library and
-+# LTDLINCL to the include flags for the libltdl header and adds
-+# --enable-ltdl-convenience to the configure arguments. Note that
-+# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
-+# it is assumed to be `libltdl'. LIBLTDL will be prefixed with
-+# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
-+# (note the single quotes!). If your package is not flat and you're not
-+# using automake, define top_builddir and top_srcdir appropriately in
-+# the Makefiles.
-+AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-+ case $enable_ltdl_convenience in
-+ no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-+ "") enable_ltdl_convenience=yes
-+ ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-+ esac
-+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-+ LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-+ # For backwards non-gettext consistent compatibility...
-+ INCLTDL="$LTDLINCL"
-+])# AC_LIBLTDL_CONVENIENCE
-+
-+
-+# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
-+# -----------------------------------
-+# sets LIBLTDL to the link flags for the libltdl installable library and
-+# LTDLINCL to the include flags for the libltdl header and adds
-+# --enable-ltdl-install to the configure arguments. Note that
-+# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
-+# and an installed libltdl is not found, it is assumed to be `libltdl'.
-+# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
-+# '${top_srcdir}/' (note the single quotes!). If your package is not
-+# flat and you're not using automake, define top_builddir and top_srcdir
-+# appropriately in the Makefiles.
-+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-+AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-+ AC_CHECK_LIB(ltdl, lt_dlinit,
-+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-+ [if test x"$enable_ltdl_install" = xno; then
-+ AC_MSG_WARN([libltdl not installed, but installation disabled])
-+ else
-+ enable_ltdl_install=yes
-+ fi
-+ ])
-+ if test x"$enable_ltdl_install" = x"yes"; then
-+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
-+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-+ LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-+ else
-+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-+ LIBLTDL="-lltdl"
-+ LTDLINCL=
-+ fi
-+ # For backwards non-gettext consistent compatibility...
-+ INCLTDL="$LTDLINCL"
-+])# AC_LIBLTDL_INSTALLABLE
-+
-+
-+# AC_LIBTOOL_CXX
-+# --------------
-+# enable support for C++ libraries
-+AC_DEFUN([AC_LIBTOOL_CXX],
-+[AC_REQUIRE([_LT_AC_LANG_CXX])
-+])# AC_LIBTOOL_CXX
-+
-+
-+# _LT_AC_LANG_CXX
-+# ---------------
-+AC_DEFUN([_LT_AC_LANG_CXX],
-+[AC_REQUIRE([AC_PROG_CXX])
-+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
-+])# _LT_AC_LANG_CXX
-+
-+# _LT_AC_PROG_CXXCPP
-+# ------------------
-+AC_DEFUN([_LT_AC_PROG_CXXCPP],
-+[
-+AC_REQUIRE([AC_PROG_CXX])
-+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-+ (test "X$CXX" != "Xg++"))) ; then
-+ AC_PROG_CXXCPP
-+fi
-+])# _LT_AC_PROG_CXXCPP
-+
-+# AC_LIBTOOL_F77
-+# --------------
-+# enable support for Fortran 77 libraries
-+AC_DEFUN([AC_LIBTOOL_F77],
-+[AC_REQUIRE([_LT_AC_LANG_F77])
-+])# AC_LIBTOOL_F77
-+
-+
-+# _LT_AC_LANG_F77
-+# ---------------
-+AC_DEFUN([_LT_AC_LANG_F77],
-+[AC_REQUIRE([AC_PROG_F77])
-+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
-+])# _LT_AC_LANG_F77
-+
-+
-+# AC_LIBTOOL_GCJ
-+# --------------
-+# enable support for GCJ libraries
-+AC_DEFUN([AC_LIBTOOL_GCJ],
-+[AC_REQUIRE([_LT_AC_LANG_GCJ])
-+])# AC_LIBTOOL_GCJ
-+
-+
-+# _LT_AC_LANG_GCJ
-+# ---------------
-+AC_DEFUN([_LT_AC_LANG_GCJ],
-+[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-+ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-+ [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-+ [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-+ [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
-+])# _LT_AC_LANG_GCJ
-+
-+
-+# AC_LIBTOOL_RC
-+# -------------
-+# enable support for Windows resource files
-+AC_DEFUN([AC_LIBTOOL_RC],
-+[AC_REQUIRE([LT_AC_PROG_RC])
-+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
-+])# AC_LIBTOOL_RC
-+
-+
-+# AC_LIBTOOL_LANG_C_CONFIG
-+# ------------------------
-+# Ensure that the configuration vars for the C compiler are
-+# suitably defined. Those variables are subsequently used by
-+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-+AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-+AC_DEFUN([_LT_AC_LANG_C_CONFIG],
-+[lt_save_CC="$CC"
-+AC_LANG_PUSH(C)
-+
-+# Source file extension for C test sources.
-+ac_ext=c
-+
-+# Object file extension for compiled C test sources.
-+objext=o
-+_LT_AC_TAGVAR(objext, $1)=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="int some_variable = 0;\n"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='int main(){return(0);}\n'
-+
-+_LT_AC_SYS_COMPILER
-+
-+# save warnings/boilerplate of simple test code
-+_LT_COMPILER_BOILERPLATE
-+_LT_LINKER_BOILERPLATE
-+
-+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-+AC_LIBTOOL_PROG_COMPILER_PIC($1)
-+AC_LIBTOOL_PROG_CC_C_O($1)
-+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-+AC_LIBTOOL_PROG_LD_SHLIBS($1)
-+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-+AC_LIBTOOL_SYS_LIB_STRIP
-+AC_LIBTOOL_DLOPEN_SELF
-+
-+# Report which library types will actually be built
-+AC_MSG_CHECKING([if libtool supports shared libraries])
-+AC_MSG_RESULT([$can_build_shared])
-+
-+AC_MSG_CHECKING([whether to build shared libraries])
-+test "$can_build_shared" = "no" && enable_shared=no
-+
-+# On AIX, shared libraries and static libraries use the same namespace, and
-+# are all built from PIC.
-+case $host_os in
-+aix3*)
-+ test "$enable_shared" = yes && enable_static=no
-+ if test -n "$RANLIB"; then
-+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
-+ postinstall_cmds='$RANLIB $lib'
-+ fi
-+ ;;
-+
-+aix4* | aix5*)
-+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-+ test "$enable_shared" = yes && enable_static=no
-+ fi
-+ ;;
-+esac
-+AC_MSG_RESULT([$enable_shared])
-+
-+AC_MSG_CHECKING([whether to build static libraries])
-+# Make sure either enable_shared or enable_static is yes.
-+test "$enable_shared" = yes || enable_static=yes
-+AC_MSG_RESULT([$enable_static])
-+
-+AC_LIBTOOL_CONFIG($1)
-+
-+AC_LANG_POP
-+CC="$lt_save_CC"
-+])# AC_LIBTOOL_LANG_C_CONFIG
-+
-+
-+# AC_LIBTOOL_LANG_CXX_CONFIG
-+# --------------------------
-+# Ensure that the configuration vars for the C compiler are
-+# suitably defined. Those variables are subsequently used by
-+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-+AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
-+AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
-+[AC_LANG_PUSH(C++)
-+AC_REQUIRE([AC_PROG_CXX])
-+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-+
-+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-+_LT_AC_TAGVAR(always_export_symbols, $1)=no
-+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-+_LT_AC_TAGVAR(hardcode_direct, $1)=no
-+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-+_LT_AC_TAGVAR(module_cmds, $1)=
-+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-+_LT_AC_TAGVAR(no_undefined_flag, $1)=
-+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-+
-+# Dependencies to place before and after the object being linked:
-+_LT_AC_TAGVAR(predep_objects, $1)=
-+_LT_AC_TAGVAR(postdep_objects, $1)=
-+_LT_AC_TAGVAR(predeps, $1)=
-+_LT_AC_TAGVAR(postdeps, $1)=
-+_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
-+
-+# Source file extension for C++ test sources.
-+ac_ext=cpp
-+
-+# Object file extension for compiled C++ test sources.
-+objext=o
-+_LT_AC_TAGVAR(objext, $1)=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="int some_variable = 0;\n"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }\n'
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+_LT_AC_SYS_COMPILER
-+
-+# save warnings/boilerplate of simple test code
-+_LT_COMPILER_BOILERPLATE
-+_LT_LINKER_BOILERPLATE
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC=$CC
-+lt_save_LD=$LD
-+lt_save_GCC=$GCC
-+GCC=$GXX
-+lt_save_with_gnu_ld=$with_gnu_ld
-+lt_save_path_LD=$lt_cv_path_LD
-+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-+else
-+ $as_unset lt_cv_prog_gnu_ld
-+fi
-+if test -n "${lt_cv_path_LDCXX+set}"; then
-+ lt_cv_path_LD=$lt_cv_path_LDCXX
-+else
-+ $as_unset lt_cv_path_LD
-+fi
-+test -z "${LDCXX+set}" || LD=$LDCXX
-+CC=${CXX-"c++"}
-+compiler=$CC
-+_LT_AC_TAGVAR(compiler, $1)=$CC
-+_LT_CC_BASENAME([$compiler])
-+
-+# We don't want -fno-exception wen compiling C++ code, so set the
-+# no_builtin_flag separately
-+if test "$GXX" = yes; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-+else
-+ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-+fi
-+
-+if test "$GXX" = yes; then
-+ # Set up default GNU C++ configuration
-+
-+ AC_PROG_LD
-+
-+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
-+ # archiving commands below assume that GNU ld is being used.
-+ if test "$with_gnu_ld" = yes; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-+
-+ # If archive_cmds runs LD, not CC, wlarc should be empty
-+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-+ # investigate it a little bit more. (MM)
-+ wlarc='${wl}'
-+
-+ # ancient GNU ld didn't support --whole-archive et. al.
-+ if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-+ grep 'no-whole-archive' > /dev/null; then
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ else
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-+ fi
-+ else
-+ with_gnu_ld=no
-+ wlarc=
-+
-+ # A generic and very simple default shared library creation
-+ # command for GNU C++ for the case where it uses the native
-+ # linker, instead of GNU ld. If possible, this setting should
-+ # overridden to take advantage of the native linker features on
-+ # the platform it is being used on.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-+ fi
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+else
-+ GXX=no
-+ with_gnu_ld=no
-+ wlarc=
-+fi
-+
-+# PORTME: fill in a description of your system's C++ link characteristics
-+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-+_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-+case $host_os in
-+ aix3*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ aix4* | aix5*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ exp_sym_flag='-Bexport'
-+ no_entry_flag=""
-+ else
-+ aix_use_runtimelinking=no
-+
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-+ for ld_flag in $LDFLAGS; do
-+ case $ld_flag in
-+ *-brtl*)
-+ aix_use_runtimelinking=yes
-+ break
-+ ;;
-+ esac
-+ done
-+ ;;
-+ esac
-+
-+ exp_sym_flag='-bexport'
-+ no_entry_flag='-bnoentry'
-+ fi
-+
-+ # When large executables or shared objects are built, AIX ld can
-+ # have problems creating the table of contents. If linking a library
-+ # or program results in "error TOC overflow" add -mminimal-toc to
-+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+ _LT_AC_TAGVAR(archive_cmds, $1)=''
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+
-+ if test "$GXX" = yes; then
-+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
-+ # We only want to do this on AIX 4.2 and lower, the check
-+ # below for broken collect2 doesn't work under 4.3+
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ else
-+ # We have old collect2
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-+ # It fails to find uninstalled libraries when the uninstalled
-+ # path is not listed in the libpath. Setting hardcode_minus_L
-+ # to unsupported forces relinking
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-+ fi
-+ ;;
-+ esac
-+ shared_flag='-shared'
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag="$shared_flag "'${wl}-G'
-+ fi
-+ else
-+ # not using gcc
-+ if test "$host_cpu" = ia64; then
-+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+ # chokes on -Wl,-G. The following line is correct:
-+ shared_flag='-G'
-+ else
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag='${wl}-G'
-+ else
-+ shared_flag='${wl}-bM:SRE'
-+ fi
-+ fi
-+ fi
-+
-+ # It seems that -bexpall does not export symbols beginning with
-+ # underscore (_), so it is better to generate a list of symbols to export.
-+ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # Warning - without using the other runtime loading flags (-brtl),
-+ # -berok will link without error, but may produce a broken library.
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ _LT_AC_SYS_LIBPATH_AIX
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-+
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+ else
-+ if test "$host_cpu" = ia64; then
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+ else
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ _LT_AC_SYS_LIBPATH_AIX
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ # Warning - without using the other run time loading flags,
-+ # -berok will link without error, but may produce a broken library.
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-+ # Exported symbols can be pulled into shared objects from archives
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-+ # This is similar to how AIX traditionally builds its shared libraries.
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+ fi
-+ fi
-+ ;;
-+
-+ beos*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-+ # support --undefined. This deserves some investigation. FIXME
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+
-+ chorus*)
-+ case $cc_basename in
-+ *)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-+ # as there is no search path for DLLs.
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ _LT_AC_TAGVAR(always_export_symbols, $1)=no
-+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-+
-+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ # If the export-symbols file already is a .def file (1st line
-+ # is EXPORTS), use it as is; otherwise, prepend...
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname.def;
-+ else
-+ echo EXPORTS > $output_objdir/$soname.def;
-+ cat $export_symbols >> $output_objdir/$soname.def;
-+ fi~
-+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ darwin* | rhapsody*)
-+ case $host_os in
-+ rhapsody* | darwin1.[[012]])
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
-+ ;;
-+ *) # Darwin 1.3 on
-+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ else
-+ case ${MACOSX_DEPLOYMENT_TARGET} in
-+ 10.[[012]])
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ ;;
-+ 10.*)
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+ esac
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+
-+ if test "$GXX" = yes ; then
-+ lt_int_apple_cc_single_mod=no
-+ output_verbose_link_cmd='echo'
-+ if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
-+ lt_int_apple_cc_single_mod=yes
-+ fi
-+ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+ fi
-+ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ else
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ fi
-+ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ else
-+ case $cc_basename in
-+ xlc*)
-+ output_verbose_link_cmd='echo'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
-+ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ dgux*)
-+ case $cc_basename in
-+ ec++*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ ghcx*)
-+ # Green Hills C++ Compiler
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ ;;
-+ freebsd[[12]]*)
-+ # C++ shared libraries reported to be fairly broken before switch to ELF
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ freebsd-elf*)
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ ;;
-+ freebsd* | kfreebsd*-gnu | dragonfly*)
-+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-+ # conventions
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-+ ;;
-+ gnu*)
-+ ;;
-+ hpux9*)
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-+ # but as the default
-+ # location of the library.
-+
-+ case $cc_basename in
-+ CC*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ aCC*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ else
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ hpux10*|hpux11*)
-+ if test $with_gnu_ld = no; then
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+ ;;
-+ esac
-+ fi
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-+ # but as the default
-+ # location of the library.
-+ ;;
-+ esac
-+
-+ case $cc_basename in
-+ CC*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ aCC*)
-+ case $host_cpu in
-+ hppa*64*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ ia64*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ esac
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes; then
-+ if test $with_gnu_ld = no; then
-+ case $host_cpu in
-+ hppa*64*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ ia64*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ esac
-+ fi
-+ else
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ interix3*)
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+ # Instead, shared libraries are loaded at an image base (0x10000000 by
-+ # default) and relocated if they conflict, which is a slow very memory
-+ # consuming and fragmenting process. To avoid this, we pick a random,
-+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ ;;
-+ irix5* | irix6*)
-+ case $cc_basename in
-+ CC*)
-+ # SGI C++
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
-+ # necessary to make sure instantiated templates are included
-+ # in the archive.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-+ ;;
-+ *)
-+ if test "$GXX" = yes; then
-+ if test "$with_gnu_ld" = no; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-+ fi
-+ fi
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+ ;;
-+ esac
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ ;;
-+ linux*)
-+ case $cc_basename in
-+ KCC*)
-+ # Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+ # KCC will only create a shared library if the output file
-+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
-+ # to its proper name (with version) after linking.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-+ ;;
-+ icpc*)
-+ # Intel C++
-+ with_gnu_ld=yes
-+ # version 8.0 and above of icpc choke on multiply defined symbols
-+ # if we add $predep_objects and $postdep_objects, however 7.1 and
-+ # earlier do not add the objects themselves.
-+ case `$CC -V 2>&1` in
-+ *"Version 7."*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ ;;
-+ *) # Version 8.0 or newer
-+ tmp_idyn=
-+ case $host_cpu in
-+ ia64*) tmp_idyn=' -i_dynamic';;
-+ esac
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ ;;
-+ esac
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-+ ;;
-+ pgCC*)
-+ # Portland Group C++ compiler
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ ;;
-+ cxx*)
-+ # Compaq C++
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-+
-+ runpath_var=LD_RUN_PATH
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ esac
-+ ;;
-+ lynxos*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ m88k*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ mvs*)
-+ case $cc_basename in
-+ cxx*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ ;;
-+ netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-+ wlarc=
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ fi
-+ # Workaround some broken pre-1.5 toolchains
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-+ ;;
-+ openbsd2*)
-+ # C++ shared libraries are fairly broken
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ openbsd*)
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ fi
-+ output_verbose_link_cmd='echo'
-+ ;;
-+ osf3*)
-+ case $cc_basename in
-+ KCC*)
-+ # Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+ # KCC will only create a shared library if the output file
-+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
-+ # to its proper name (with version) after linking.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-+
-+ ;;
-+ RCC*)
-+ # Rational C++ 2.4.1
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ cxx*)
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+ else
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ osf4* | osf5*)
-+ case $cc_basename in
-+ KCC*)
-+ # Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+ # KCC will only create a shared library if the output file
-+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
-+ # to its proper name (with version) after linking.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Archives containing C++ object files must be created using
-+ # the KAI C++ compiler.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-+ ;;
-+ RCC*)
-+ # Rational C++ 2.4.1
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ cxx*)
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-+ echo "-hidden">> $lib.exp~
-+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
-+ $rm $lib.exp'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+ else
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ psos*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ sunos4*)
-+ case $cc_basename in
-+ CC*)
-+ # Sun C++ 4.x
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ lcc*)
-+ # Lucid
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ ;;
-+ solaris*)
-+ case $cc_basename in
-+ CC*)
-+ # Sun C++ 4.2, 5.x and Centerline C++
-+ _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ case $host_os in
-+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-+ *)
-+ # The C++ compiler is used as linker so we must use $wl
-+ # flag to pass the commands to the underlying system
-+ # linker. We must also pass each convience library through
-+ # to the system linker between allextract/defaultextract.
-+ # The C++ compiler will combine linker options so we
-+ # cannot just pass the convience library names through
-+ # without $wl.
-+ # Supported since Solaris 2.6 (maybe 2.5.1?)
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
-+ ;;
-+ esac
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+
-+ output_verbose_link_cmd='echo'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
-+ # necessary to make sure instantiated templates are included
-+ # in the archive.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-+ ;;
-+ gcx*)
-+ # Green Hills C++ Compiler
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+
-+ # The C++ compiler must be used to create the archive.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-+ ;;
-+ *)
-+ # GNU C++ compiler with Solaris linker
-+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-+ if $CC --version | grep -v '^2\.7' > /dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-+ else
-+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
-+ # platform.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-+ fi
-+
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ runpath_var='LD_RUN_PATH'
-+
-+ case $cc_basename in
-+ CC*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ ;;
-+ sysv5* | sco3.2v5* | sco5v6*)
-+ # Note: We can NOT use -z defs as we might desire, because we do not
-+ # link with -lc, and that would cause any symbols used from libc to
-+ # always be unresolved, which means just about no library would
-+ # ever link correctly. If we're not using GNU ld we use -z text
-+ # though, which does catch some bad symbols but isn't as heavy-handed
-+ # as -z defs.
-+ # For security reasons, it is highly recommended that you always
-+ # use absolute paths for naming shared libraries, and exclude the
-+ # DT_RUNPATH tag from executables and libraries. But doing so
-+ # requires that you compile everything twice, which is a pain.
-+ # So that behaviour is only enabled if SCOABSPATH is set to a
-+ # non-empty value in the environment. Most likely only useful for
-+ # creating official distributions of packages.
-+ # This is a hack until libtool officially supports absolute path
-+ # names for shared libraries.
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-+ runpath_var='LD_RUN_PATH'
-+
-+ case $cc_basename in
-+ CC*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ ;;
-+ tandem*)
-+ case $cc_basename in
-+ NCC*)
-+ # NonStop-UX NCC 3.20
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ ;;
-+ vxworks*)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+esac
-+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-+
-+_LT_AC_TAGVAR(GCC, $1)="$GXX"
-+_LT_AC_TAGVAR(LD, $1)="$LD"
-+
-+AC_LIBTOOL_POSTDEP_PREDEP($1)
-+AC_LIBTOOL_PROG_COMPILER_PIC($1)
-+AC_LIBTOOL_PROG_CC_C_O($1)
-+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-+AC_LIBTOOL_PROG_LD_SHLIBS($1)
-+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-+
-+AC_LIBTOOL_CONFIG($1)
-+
-+AC_LANG_POP
-+CC=$lt_save_CC
-+LDCXX=$LD
-+LD=$lt_save_LD
-+GCC=$lt_save_GCC
-+with_gnu_ldcxx=$with_gnu_ld
-+with_gnu_ld=$lt_save_with_gnu_ld
-+lt_cv_path_LDCXX=$lt_cv_path_LD
-+lt_cv_path_LD=$lt_save_path_LD
-+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-+])# AC_LIBTOOL_LANG_CXX_CONFIG
-+
-+# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
-+# ------------------------------------
-+# Figure out "hidden" library dependencies from verbose
-+# compiler output when linking a shared library.
-+# Parse the compiler output and extract the necessary
-+# objects, libraries and library flags.
-+AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
-+dnl we can't use the lt_simple_compile_test_code here,
-+dnl because it contains code intended for an executable,
-+dnl not a library. It's possible we should let each
-+dnl tag define a new lt_????_link_test_code variable,
-+dnl but it's only used here...
-+ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
-+int a;
-+void foo (void) { a = 0; }
-+EOF
-+],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
-+class Foo
-+{
-+public:
-+ Foo (void) { a = 0; }
-+private:
-+ int a;
-+};
-+EOF
-+],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-+ subroutine foo
-+ implicit none
-+ integer*4 a
-+ a=0
-+ return
-+ end
-+EOF
-+],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
-+public class foo {
-+ private int a;
-+ public void bar (void) {
-+ a = 0;
-+ }
-+};
-+EOF
-+])
-+dnl Parse the compiler output and extract the necessary
-+dnl objects, libraries and library flags.
-+if AC_TRY_EVAL(ac_compile); then
-+ # Parse the compiler output and extract the necessary
-+ # objects, libraries and library flags.
-+
-+ # Sentinel used to keep track of whether or not we are before
-+ # the conftest object file.
-+ pre_test_object_deps_done=no
-+
-+ # The `*' in the case matches for architectures that use `case' in
-+ # $output_verbose_cmd can trigger glob expansion during the loop
-+ # eval without this substitution.
-+ output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-+
-+ for p in `eval $output_verbose_link_cmd`; do
-+ case $p in
-+
-+ -L* | -R* | -l*)
-+ # Some compilers place space between "-{L,R}" and the path.
-+ # Remove the space.
-+ if test $p = "-L" \
-+ || test $p = "-R"; then
-+ prev=$p
-+ continue
-+ else
-+ prev=
-+ fi
-+
-+ if test "$pre_test_object_deps_done" = no; then
-+ case $p in
-+ -L* | -R*)
-+ # Internal compiler library paths should come after those
-+ # provided the user. The postdeps already come after the
-+ # user supplied libs so there is no need to process them.
-+ if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-+ _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-+ else
-+ _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-+ fi
-+ ;;
-+ # The "-l" case would never come before the object being
-+ # linked, so don't bother handling this case.
-+ esac
-+ else
-+ if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-+ _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-+ else
-+ _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-+ fi
-+ fi
-+ ;;
-+
-+ *.$objext)
-+ # This assumes that the test object file only shows up
-+ # once in the compiler output.
-+ if test "$p" = "conftest.$objext"; then
-+ pre_test_object_deps_done=yes
-+ continue
-+ fi
-+
-+ if test "$pre_test_object_deps_done" = no; then
-+ if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-+ _LT_AC_TAGVAR(predep_objects, $1)="$p"
-+ else
-+ _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-+ fi
-+ else
-+ if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-+ _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-+ else
-+ _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-+ fi
-+ fi
-+ ;;
-+
-+ *) ;; # Ignore the rest.
-+
-+ esac
-+ done
-+
-+ # Clean up.
-+ rm -f a.out a.exe
-+else
-+ echo "libtool.m4: error: problem compiling $1 test program"
-+fi
-+
-+$rm -f confest.$objext
-+
-+# PORTME: override above test on systems where it is broken
-+ifelse([$1],[CXX],
-+[case $host_os in
-+interix3*)
-+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
-+ # hack all around it, let's just trust "g++" to DTRT.
-+ _LT_AC_TAGVAR(predep_objects,$1)=
-+ _LT_AC_TAGVAR(postdep_objects,$1)=
-+ _LT_AC_TAGVAR(postdeps,$1)=
-+ ;;
-+
-+solaris*)
-+ case $cc_basename in
-+ CC*)
-+ # Adding this requires a known-good setup of shared libraries for
-+ # Sun compiler versions before 5.6, else PIC objects from an old
-+ # archive will be linked into the output, leading to subtle bugs.
-+ _LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun'
-+ ;;
-+ esac
-+ ;;
-+esac
-+])
-+
-+case " $_LT_AC_TAGVAR(postdeps, $1) " in
-+*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-+esac
-+])# AC_LIBTOOL_POSTDEP_PREDEP
-+
-+# AC_LIBTOOL_LANG_F77_CONFIG
-+# --------------------------
-+# Ensure that the configuration vars for the C compiler are
-+# suitably defined. Those variables are subsequently used by
-+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-+AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
-+AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
-+[AC_REQUIRE([AC_PROG_F77])
-+AC_LANG_PUSH(Fortran 77)
-+
-+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-+_LT_AC_TAGVAR(always_export_symbols, $1)=no
-+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-+_LT_AC_TAGVAR(hardcode_direct, $1)=no
-+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-+_LT_AC_TAGVAR(module_cmds, $1)=
-+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-+_LT_AC_TAGVAR(no_undefined_flag, $1)=
-+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-+
-+# Source file extension for f77 test sources.
-+ac_ext=f
-+
-+# Object file extension for compiled f77 test sources.
-+objext=o
-+_LT_AC_TAGVAR(objext, $1)=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code=" subroutine t\n return\n end\n"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code=" program t\n end\n"
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+_LT_AC_SYS_COMPILER
-+
-+# save warnings/boilerplate of simple test code
-+_LT_COMPILER_BOILERPLATE
-+_LT_LINKER_BOILERPLATE
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${F77-"f77"}
-+compiler=$CC
-+_LT_AC_TAGVAR(compiler, $1)=$CC
-+_LT_CC_BASENAME([$compiler])
-+
-+AC_MSG_CHECKING([if libtool supports shared libraries])
-+AC_MSG_RESULT([$can_build_shared])
-+
-+AC_MSG_CHECKING([whether to build shared libraries])
-+test "$can_build_shared" = "no" && enable_shared=no
-+
-+# On AIX, shared libraries and static libraries use the same namespace, and
-+# are all built from PIC.
-+case $host_os in
-+aix3*)
-+ test "$enable_shared" = yes && enable_static=no
-+ if test -n "$RANLIB"; then
-+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
-+ postinstall_cmds='$RANLIB $lib'
-+ fi
-+ ;;
-+aix4* | aix5*)
-+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-+ test "$enable_shared" = yes && enable_static=no
-+ fi
-+ ;;
-+esac
-+AC_MSG_RESULT([$enable_shared])
-+
-+AC_MSG_CHECKING([whether to build static libraries])
-+# Make sure either enable_shared or enable_static is yes.
-+test "$enable_shared" = yes || enable_static=yes
-+AC_MSG_RESULT([$enable_static])
-+
-+_LT_AC_TAGVAR(GCC, $1)="$G77"
-+_LT_AC_TAGVAR(LD, $1)="$LD"
-+
-+AC_LIBTOOL_PROG_COMPILER_PIC($1)
-+AC_LIBTOOL_PROG_CC_C_O($1)
-+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-+AC_LIBTOOL_PROG_LD_SHLIBS($1)
-+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-+
-+AC_LIBTOOL_CONFIG($1)
-+
-+AC_LANG_POP
-+CC="$lt_save_CC"
-+])# AC_LIBTOOL_LANG_F77_CONFIG
-+
-+
-+# AC_LIBTOOL_LANG_GCJ_CONFIG
-+# --------------------------
-+# Ensure that the configuration vars for the C compiler are
-+# suitably defined. Those variables are subsequently used by
-+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-+AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
-+AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
-+[AC_LANG_SAVE
-+
-+# Source file extension for Java test sources.
-+ac_ext=java
-+
-+# Object file extension for compiled Java test sources.
-+objext=o
-+_LT_AC_TAGVAR(objext, $1)=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="class foo {}\n"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n'
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+_LT_AC_SYS_COMPILER
-+
-+# save warnings/boilerplate of simple test code
-+_LT_COMPILER_BOILERPLATE
-+_LT_LINKER_BOILERPLATE
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${GCJ-"gcj"}
-+compiler=$CC
-+_LT_AC_TAGVAR(compiler, $1)=$CC
-+_LT_CC_BASENAME([$compiler])
-+
-+# GCJ did not exist@the time GCC didn't implicitly link libc in.
-+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+
-+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-+
-+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-+AC_LIBTOOL_PROG_COMPILER_PIC($1)
-+AC_LIBTOOL_PROG_CC_C_O($1)
-+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-+AC_LIBTOOL_PROG_LD_SHLIBS($1)
-+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-+
-+AC_LIBTOOL_CONFIG($1)
-+
-+AC_LANG_RESTORE
-+CC="$lt_save_CC"
-+])# AC_LIBTOOL_LANG_GCJ_CONFIG
-+
-+
-+# AC_LIBTOOL_LANG_RC_CONFIG
-+# -------------------------
-+# Ensure that the configuration vars for the Windows resource compiler are
-+# suitably defined. Those variables are subsequently used by
-+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-+AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
-+AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
-+[AC_LANG_SAVE
-+
-+# Source file extension for RC test sources.
-+ac_ext=rc
-+
-+# Object file extension for compiled RC test sources.
-+objext=o
-+_LT_AC_TAGVAR(objext, $1)=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code="$lt_simple_compile_test_code"
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+_LT_AC_SYS_COMPILER
-+
-+# save warnings/boilerplate of simple test code
-+_LT_COMPILER_BOILERPLATE
-+_LT_LINKER_BOILERPLATE
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${RC-"windres"}
-+compiler=$CC
-+_LT_AC_TAGVAR(compiler, $1)=$CC
-+_LT_CC_BASENAME([$compiler])
-+_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-+
-+AC_LIBTOOL_CONFIG($1)
-+
-+AC_LANG_RESTORE
-+CC="$lt_save_CC"
-+])# AC_LIBTOOL_LANG_RC_CONFIG
-+
-+
-+# AC_LIBTOOL_CONFIG([TAGNAME])
-+# ----------------------------
-+# If TAGNAME is not passed, then create an initial libtool script
-+# with a default configuration from the untagged config vars. Otherwise
-+# add code to config.status for appending the configuration named by
-+# TAGNAME from the matching tagged config vars.
-+AC_DEFUN([AC_LIBTOOL_CONFIG],
-+[# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+ # See if we are running on zsh, and set the options which allow our commands through
-+ # without removal of \ escapes.
-+ if test -n "${ZSH_VERSION+set}" ; then
-+ setopt NO_GLOB_SUBST
-+ fi
-+ # Now quote all the things that may contain metacharacters while being
-+ # careful not to overquote the AC_SUBSTed values. We take copies of the
-+ # variables and quote the copies for generation of the libtool script.
-+ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+ SED SHELL STRIP \
-+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+ deplibs_check_method reload_flag reload_cmds need_locks \
-+ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+ lt_cv_sys_global_symbol_to_c_name_address \
-+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+ old_postinstall_cmds old_postuninstall_cmds \
-+ _LT_AC_TAGVAR(compiler, $1) \
-+ _LT_AC_TAGVAR(CC, $1) \
-+ _LT_AC_TAGVAR(LD, $1) \
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-+ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-+ _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
-+ _LT_AC_TAGVAR(old_archive_cmds, $1) \
-+ _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-+ _LT_AC_TAGVAR(predep_objects, $1) \
-+ _LT_AC_TAGVAR(postdep_objects, $1) \
-+ _LT_AC_TAGVAR(predeps, $1) \
-+ _LT_AC_TAGVAR(postdeps, $1) \
-+ _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-+ _LT_AC_TAGVAR(archive_cmds, $1) \
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-+ _LT_AC_TAGVAR(postinstall_cmds, $1) \
-+ _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-+ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-+ _LT_AC_TAGVAR(no_undefined_flag, $1) \
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-+ _LT_AC_TAGVAR(hardcode_automatic, $1) \
-+ _LT_AC_TAGVAR(module_cmds, $1) \
-+ _LT_AC_TAGVAR(module_expsym_cmds, $1) \
-+ _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-+ _LT_AC_TAGVAR(exclude_expsyms, $1) \
-+ _LT_AC_TAGVAR(include_expsyms, $1); do
-+
-+ case $var in
-+ _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-+ _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-+ _LT_AC_TAGVAR(archive_cmds, $1) | \
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-+ _LT_AC_TAGVAR(module_cmds, $1) | \
-+ _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
-+ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+ postinstall_cmds | postuninstall_cmds | \
-+ old_postinstall_cmds | old_postuninstall_cmds | \
-+ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+ # Double-quote double-evaled strings.
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+ ;;
-+ *)
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+ ;;
-+ esac
-+ done
-+
-+ case $lt_echo in
-+ *'\[$]0 --fallback-echo"')
-+ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-+ ;;
-+ esac
-+
-+ifelse([$1], [],
-+ [cfgfile="${ofile}T"
-+ trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-+ $rm -f "$cfgfile"
-+ AC_MSG_NOTICE([creating $ofile])],
-+ [cfgfile="$ofile"])
-+
-+ cat <<__EOF__ >> "$cfgfile"
-+ifelse([$1], [],
-+[#! $SHELL
-+
-+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-+#
-+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-+# Free Software Foundation, Inc.
-+#
-+# This file is part of GNU Libtool:
-+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-+#
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+# General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-+#
-+# As a special exception to the GNU General Public License, if you
-+# distribute this file as part of a program that contains a
-+# configuration script generated by Autoconf, you may include it under
-+# the same distribution terms that you use for the rest of that program.
-+
-+# A sed program that does not truncate output.
-+SED=$lt_SED
-+
-+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-+Xsed="$SED -e 1s/^X//"
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-+
-+# The names of the tagged configurations supported by this script.
-+available_tags=
-+
-+# ### BEGIN LIBTOOL CONFIG],
-+[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$_LT_AC_TAGVAR(GCC, $1)
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names. First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
-+archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
-+module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
-+
-+ifelse([$1],[],
-+[# ### END LIBTOOL CONFIG],
-+[# ### END LIBTOOL TAG CONFIG: $tagname])
-+
-+__EOF__
-+
-+ifelse([$1],[], [
-+ case $host_os in
-+ aix3*)
-+ cat <<\EOF >> "$cfgfile"
-+
-+# AIX sometimes has problems with the GCC collect2 program. For some
-+# reason, if we set the COLLECT_NAMES environment variable, the problems
-+# vanish in a puff of smoke.
-+if test "X${COLLECT_NAMES+set}" != Xset; then
-+ COLLECT_NAMES=
-+ export COLLECT_NAMES
-+fi
-+EOF
-+ ;;
-+ esac
-+
-+ # We use sed instead of cat because bash on DJGPP gets confused if
-+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
-+ # text mode, it properly converts lines to CR/LF. This bash problem
-+ # is reportedly fixed, but why not run on old versions too?
-+ sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-+
-+ mv -f "$cfgfile" "$ofile" || \
-+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-+ chmod +x "$ofile"
-+])
-+else
-+ # If there is no Makefile yet, we rely on a make rule to execute
-+ # `config.status --recheck' to rerun these tests and create the
-+ # libtool script then.
-+ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+ if test -f "$ltmain_in"; then
-+ test -f Makefile && make "$ltmain"
-+ fi
-+fi
-+])# AC_LIBTOOL_CONFIG
-+
-+
-+# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
-+# -------------------------------------------
-+AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
-+[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-+
-+_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-+
-+if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-+
-+ AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-+ lt_cv_prog_compiler_rtti_exceptions,
-+ [-fno-rtti -fno-exceptions], [],
-+ [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-+fi
-+])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
-+
-+
-+# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-+# ---------------------------------
-+AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-+[AC_REQUIRE([AC_CANONICAL_HOST])
-+AC_REQUIRE([AC_PROG_NM])
-+AC_REQUIRE([AC_OBJEXT])
-+# Check for command to grab the raw symbol name followed by C symbol from nm.
-+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-+[
-+# These are sane defaults that work on at least a few old systems.
-+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-+
-+# Character class describing NM global symbol codes.
-+symcode='[[BCDEGRST]]'
-+
-+# Regexp to match symbols that can be accessed directly from C.
-+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-+
-+# Transform an extracted symbol line into a proper C declaration
-+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-+
-+# Transform an extracted symbol line into symbol name and symbol address
-+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-+
-+# Define system-specific variables.
-+case $host_os in
-+aix*)
-+ symcode='[[BCDT]]'
-+ ;;
-+cygwin* | mingw* | pw32*)
-+ symcode='[[ABCDGISTW]]'
-+ ;;
-+hpux*) # Its linker distinguishes data from code symbols
-+ if test "$host_cpu" = ia64; then
-+ symcode='[[ABCDEGRST]]'
-+ fi
-+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-+ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-+ ;;
-+linux*)
-+ if test "$host_cpu" = ia64; then
-+ symcode='[[ABCDGIRSTW]]'
-+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-+ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-+ fi
-+ ;;
-+irix* | nonstopux*)
-+ symcode='[[BCDEGRST]]'
-+ ;;
-+osf*)
-+ symcode='[[BCDEGQRST]]'
-+ ;;
-+solaris*)
-+ symcode='[[BDRT]]'
-+ ;;
-+sco3.2v5*)
-+ symcode='[[DT]]'
-+ ;;
-+sysv4.2uw2*)
-+ symcode='[[DT]]'
-+ ;;
-+sysv5* | sco5v6* | unixware* | OpenUNIX*)
-+ symcode='[[ABDT]]'
-+ ;;
-+sysv4)
-+ symcode='[[DFNSTU]]'
-+ ;;
-+esac
-+
-+# Handle CRLF in mingw tool chain
-+opt_cr=
-+case $build_os in
-+mingw*)
-+ opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-+ ;;
-+esac
-+
-+# If we're using GNU nm, then use its standard symbol codes.
-+case `$NM -V 2>&1` in
-+*GNU* | *'with BFD'*)
-+ symcode='[[ABCDGIRSTW]]' ;;
-+esac
-+
-+# Try without a prefix undercore, then with it.
-+for ac_symprfx in "" "_"; do
-+
-+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-+ symxfrm="\\1 $ac_symprfx\\2 \\2"
-+
-+ # Write the raw and C identifiers.
-+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-+
-+ # Check to see that the pipe works correctly.
-+ pipe_works=no
-+
-+ rm -f conftest*
-+ cat > conftest.$ac_ext <<EOF
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+char nm_test_var;
-+void nm_test_func(){}
-+#ifdef __cplusplus
-+}
-+#endif
-+int main(){nm_test_var='a';nm_test_func();return(0);}
-+EOF
-+
-+ if AC_TRY_EVAL(ac_compile); then
-+ # Now try to grab the symbols.
-+ nlist=conftest.nm
-+ if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-+ # Try sorting and uniquifying the output.
-+ if sort "$nlist" | uniq > "$nlist"T; then
-+ mv -f "$nlist"T "$nlist"
-+ else
-+ rm -f "$nlist"T
-+ fi
-+
-+ # Make sure that we snagged all the symbols we need.
-+ if grep ' nm_test_var$' "$nlist" >/dev/null; then
-+ if grep ' nm_test_func$' "$nlist" >/dev/null; then
-+ cat <<EOF > conftest.$ac_ext
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+EOF
-+ # Now generate the symbol file.
-+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-+
-+ cat <<EOF >> conftest.$ac_ext
-+#if defined (__STDC__) && __STDC__
-+# define lt_ptr_t void *
-+#else
-+# define lt_ptr_t char *
-+# define const
-+#endif
-+
-+/* The mapping between symbol names and symbols. */
-+const struct {
-+ const char *name;
-+ lt_ptr_t address;
-+}
-+lt_preloaded_symbols[[]] =
-+{
-+EOF
-+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-+ cat <<\EOF >> conftest.$ac_ext
-+ {0, (lt_ptr_t) 0}
-+};
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+EOF
-+ # Now try linking the two files.
-+ mv conftest.$ac_objext conftstm.$ac_objext
-+ lt_save_LIBS="$LIBS"
-+ lt_save_CFLAGS="$CFLAGS"
-+ LIBS="conftstm.$ac_objext"
-+ CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-+ pipe_works=yes
-+ fi
-+ LIBS="$lt_save_LIBS"
-+ CFLAGS="$lt_save_CFLAGS"
-+ else
-+ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-+ fi
-+ else
-+ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-+ fi
-+ else
-+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-+ fi
-+ else
-+ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-+ cat conftest.$ac_ext >&5
-+ fi
-+ rm -f conftest* conftst*
-+
-+ # Do not use the global_symbol_pipe unless it works.
-+ if test "$pipe_works" = yes; then
-+ break
-+ else
-+ lt_cv_sys_global_symbol_pipe=
-+ fi
-+done
-+])
-+if test -z "$lt_cv_sys_global_symbol_pipe"; then
-+ lt_cv_sys_global_symbol_to_cdecl=
-+fi
-+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-+ AC_MSG_RESULT(failed)
-+else
-+ AC_MSG_RESULT(ok)
-+fi
-+]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-+
-+
-+# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
-+# ---------------------------------------
-+AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
-+[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
-+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
-+
-+AC_MSG_CHECKING([for $compiler option to produce PIC])
-+ ifelse([$1],[CXX],[
-+ # C++ specific cases for pic, static, wl, etc.
-+ if test "$GXX" = yes; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-+
-+ case $host_os in
-+ aix*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ fi
-+ ;;
-+ amigaos*)
-+ # FIXME: we need at least 68020 code to build shared libraries, but
-+ # adding the `-m68020' flag to GCC prevents building anything better,
-+ # like `-m68040'.
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-+ ;;
-+ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+ # PIC is the default for these OSes.
-+ ;;
-+ mingw* | os2* | pw32*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-+ ;;
-+ darwin* | rhapsody*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-+ ;;
-+ *djgpp*)
-+ # DJGPP does not support shared libraries at all
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-+ ;;
-+ interix3*)
-+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+ # Instead, we relocate shared libraries at runtime.
-+ ;;
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-+ fi
-+ ;;
-+ hpux*)
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-+ ;;
-+ esac
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-+ ;;
-+ esac
-+ else
-+ case $host_os in
-+ aix4* | aix5*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ else
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-+ fi
-+ ;;
-+ chorus*)
-+ case $cc_basename in
-+ cxch68*)
-+ # Green Hills C++ Compiler
-+ # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-+ ;;
-+ esac
-+ ;;
-+ darwin*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ case $cc_basename in
-+ xlc*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ ;;
-+ esac
-+ ;;
-+ dgux*)
-+ case $cc_basename in
-+ ec++*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ ;;
-+ ghcx*)
-+ # Green Hills C++ Compiler
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ freebsd* | kfreebsd*-gnu | dragonfly*)
-+ # FreeBSD uses GNU C++
-+ ;;
-+ hpux9* | hpux10* | hpux11*)
-+ case $cc_basename in
-+ CC*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-+ if test "$host_cpu" != ia64; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-+ fi
-+ ;;
-+ aCC*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-+ ;;
-+ esac
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ interix*)
-+ # This is c89, which is MS Visual C++ (no shared libs)
-+ # Anyone wants to do a port?
-+ ;;
-+ irix5* | irix6* | nonstopux*)
-+ case $cc_basename in
-+ CC*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-+ # CC pic flag -KPIC is the default.
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ linux*)
-+ case $cc_basename in
-+ KCC*)
-+ # KAI C++ Compiler
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-+ ;;
-+ icpc* | ecpc*)
-+ # Intel C++
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-+ ;;
-+ pgCC*)
-+ # Portland Group C++ compiler.
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+ cxx*)
-+ # Compaq C++
-+ # Make sure the PIC flag is empty. It appears that all Alpha
-+ # Linux and Compaq Tru64 Unix objects are PIC.
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ lynxos*)
-+ ;;
-+ m88k*)
-+ ;;
-+ mvs*)
-+ case $cc_basename in
-+ cxx*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
-+ ;;
-+ osf3* | osf4* | osf5*)
-+ case $cc_basename in
-+ KCC*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-+ ;;
-+ RCC*)
-+ # Rational C++ 2.4.1
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-+ ;;
-+ cxx*)
-+ # Digital/Compaq C++
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ # Make sure the PIC flag is empty. It appears that all Alpha
-+ # Linux and Compaq Tru64 Unix objects are PIC.
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ psos*)
-+ ;;
-+ solaris*)
-+ case $cc_basename in
-+ CC*)
-+ # Sun C++ 4.2, 5.x and Centerline C++
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-+ ;;
-+ gcx*)
-+ # Green Hills C++ Compiler
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ sunos4*)
-+ case $cc_basename in
-+ CC*)
-+ # Sun C++ 4.x
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+ lcc*)
-+ # Lucid
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ tandem*)
-+ case $cc_basename in
-+ NCC*)
-+ # NonStop-UX NCC 3.20
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+ case $cc_basename in
-+ CC*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+ esac
-+ ;;
-+ vxworks*)
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-+ ;;
-+ esac
-+ fi
-+],
-+[
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-+
-+ case $host_os in
-+ aix*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ # FIXME: we need at least 68020 code to build shared libraries, but
-+ # adding the `-m68020' flag to GCC prevents building anything better,
-+ # like `-m68040'.
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-+ ;;
-+
-+ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+ # PIC is the default for these OSes.
-+ ;;
-+
-+ mingw* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-+ ;;
-+
-+ interix3*)
-+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+ # Instead, we relocate shared libraries at runtime.
-+ ;;
-+
-+ msdosdjgpp*)
-+ # Just because we use GCC doesn't mean we suddenly get shared libraries
-+ # on systems that don't support them.
-+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-+ enable_shared=no
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-+ fi
-+ ;;
-+
-+ hpux*)
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-+ ;;
-+ esac
-+ else
-+ # PORTME Check for flag to pass linker flags through the system compiler.
-+ case $host_os in
-+ aix*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ else
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-+ fi
-+ ;;
-+ darwin*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ case $cc_basename in
-+ xlc*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ ;;
-+ esac
-+ ;;
-+
-+ mingw* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
-+ ;;
-+
-+ hpux9* | hpux10* | hpux11*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-+ ;;
-+ esac
-+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ # PIC (with -KPIC) is the default.
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-+ ;;
-+
-+ newsos6)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+
-+ linux*)
-+ case $cc_basename in
-+ icc* | ecc*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-+ ;;
-+ pgcc* | pgf77* | pgf90* | pgf95*)
-+ # Portland Group compilers (*not* the Pentium gcc compiler,
-+ # which looks to be a dead project)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+ ccc*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ # All Alpha code is PIC.
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-+ ;;
-+ esac
-+ ;;
-+
-+ osf3* | osf4* | osf5*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ # All OSF/1 code is PIC.
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-+ ;;
-+
-+ solaris*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ case $cc_basename in
-+ f77* | f90* | f95*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+
-+ sysv4 | sysv4.2uw2* | sysv4.3*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ fi
-+ ;;
-+
-+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+
-+ unicos*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-+ ;;
-+
-+ uts4*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
-+
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-+ ;;
-+ esac
-+ fi
-+])
-+AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-+ AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
-+ [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
-+ [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-+ "" | " "*) ;;
-+ *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-+ esac],
-+ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-+fi
-+case $host_os in
-+ # For platforms which do not support PIC, -DPIC is meaningless:
-+ *djgpp*)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
-+ ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
-+AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
-+ _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
-+ $lt_tmp_static_flag,
-+ [],
-+ [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
-+])
-+
-+
-+# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
-+# ------------------------------------
-+# See if the linker supports building shared libraries.
-+AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-+[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-+ifelse([$1],[CXX],[
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ case $host_os in
-+ aix4* | aix5*)
-+ # If we're using GNU nm, then we don't want the "-C" option.
-+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
-+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-+ else
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-+ fi
-+ ;;
-+ pw32*)
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-+ ;;
-+ cygwin* | mingw*)
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-+ ;;
-+ kfreebsd*-gnu)
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=no
-+ ;;
-+ linux*)
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=no
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ ;;
-+ esac
-+],[
-+ runpath_var=
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-+ _LT_AC_TAGVAR(archive_cmds, $1)=
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-+ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-+ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-+ _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-+ _LT_AC_TAGVAR(hardcode_automatic, $1)=no
-+ _LT_AC_TAGVAR(module_cmds, $1)=
-+ _LT_AC_TAGVAR(module_expsym_cmds, $1)=
-+ _LT_AC_TAGVAR(always_export_symbols, $1)=no
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ # include_expsyms should be a list of space-separated symbols to be *always*
-+ # included in the symbol list
-+ _LT_AC_TAGVAR(include_expsyms, $1)=
-+ # exclude_expsyms can be an extended regexp of symbols to exclude
-+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
-+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-+ # as well as any symbol that contains `d'.
-+ _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
-+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-+ # platforms (ab)use it in PIC code, but their linkers get confused if
-+ # the symbol is explicitly referenced. Since portable code cannot
-+ # rely on this symbol name, it's probably fine to never include it in
-+ # preloaded symbol tables.
-+ extract_expsyms_cmds=
-+ # Just being paranoid about ensuring that cc_basename is set.
-+ _LT_CC_BASENAME([$compiler])
-+ case $host_os in
-+ cygwin* | mingw* | pw32*)
-+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ if test "$GCC" != yes; then
-+ with_gnu_ld=no
-+ fi
-+ ;;
-+ interix*)
-+ # we just hope/assume this is gcc and not c89 (= MSVC++)
-+ with_gnu_ld=yes
-+ ;;
-+ openbsd*)
-+ with_gnu_ld=no
-+ ;;
-+ esac
-+
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-+ if test "$with_gnu_ld" = yes; then
-+ # If archive_cmds runs LD, not CC, wlarc should be empty
-+ wlarc='${wl}'
-+
-+ # Set some defaults for GNU ld with shared library support. These
-+ # are reset later if shared libraries are not supported. Putting them
-+ # here allows them to be overridden if necessary.
-+ runpath_var=LD_RUN_PATH
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-+ # ancient GNU ld didn't support --whole-archive et. al.
-+ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ else
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-+ fi
-+ supports_anon_versioning=no
-+ case `$LD -v 2>/dev/null` in
-+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
-+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-+ *\ 2.11.*) ;; # other 2.11 versions
-+ *) supports_anon_versioning=yes ;;
-+ esac
-+
-+ # See if GNU ld supports shared libraries.
-+ case $host_os in
-+ aix3* | aix4* | aix5*)
-+ # On AIX/PPC, the GNU linker is very broken
-+ if test "$host_cpu" != ia64; then
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-+*** to be unable to reliably create shared libraries on AIX.
-+*** Therefore, libtool is disabling shared libraries support. If you
-+*** really care for shared libraries, you may want to modify your PATH
-+*** so that a non-GNU linker is found, and then restart.
-+
-+EOF
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+
-+ # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-+ # that the semantics of dynamic libraries on AmigaOS, at least up
-+ # to version 4, is to share data among multiple programs linked
-+ # with the same dynamic library. Since this doesn't match the
-+ # behavior of shared libraries on other platforms, we can't use
-+ # them.
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+
-+ beos*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-+ # support --undefined. This deserves some investigation. FIXME
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-+ # as there is no search path for DLLs.
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ _LT_AC_TAGVAR(always_export_symbols, $1)=no
-+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-+
-+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ # If the export-symbols file already is a .def file (1st line
-+ # is EXPORTS), use it as is; otherwise, prepend...
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname.def;
-+ else
-+ echo EXPORTS > $output_objdir/$soname.def;
-+ cat $export_symbols >> $output_objdir/$soname.def;
-+ fi~
-+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+
-+ interix3*)
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+ # Instead, shared libraries are loaded at an image base (0x10000000 by
-+ # default) and relocated if they conflict, which is a slow very memory
-+ # consuming and fragmenting process. To avoid this, we pick a random,
-+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ ;;
-+
-+ linux*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ tmp_addflag=
-+ case $cc_basename,$host_cpu in
-+ pgcc*) # Portland Group C compiler
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag'
-+ ;;
-+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag -Mnomain' ;;
-+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
-+ tmp_addflag=' -i_dynamic' ;;
-+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
-+ tmp_addflag=' -i_dynamic -nofor_main' ;;
-+ ifc* | ifort*) # Intel Fortran compiler
-+ tmp_addflag=' -nofor_main' ;;
-+ esac
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+
-+ if test $supports_anon_versioning = yes; then
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
-+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-+ $echo "local: *; };" >> $output_objdir/$libname.ver~
-+ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-+ fi
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=no
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-+ wlarc=
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ fi
-+ ;;
-+
-+ solaris*)
-+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-+*** create shared libraries on Solaris systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.9.1 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+EOF
-+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-+ case `$LD -v 2>&1` in
-+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ cat <<_LT_EOF 1>&2
-+
-+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-+*** reliably create shared libraries on SCO systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+_LT_EOF
-+ ;;
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ wlarc=
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ esac
-+
-+ if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
-+ runpath_var=
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-+ fi
-+ else
-+ # PORTME fill in a description of your system's linker (not GNU ld)
-+ case $host_os in
-+ aix3*)
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-+ # Note: this linker hardcodes the directories in LIBPATH if there
-+ # are no directories specified by -L.
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-+ # Neither direct hardcoding nor static linking is supported with a
-+ # broken collect2.
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-+ fi
-+ ;;
-+
-+ aix4* | aix5*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ exp_sym_flag='-Bexport'
-+ no_entry_flag=""
-+ else
-+ # If we're using GNU nm, then we don't want the "-C" option.
-+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
-+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-+ else
-+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-+ fi
-+ aix_use_runtimelinking=no
-+
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-+ for ld_flag in $LDFLAGS; do
-+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-+ aix_use_runtimelinking=yes
-+ break
-+ fi
-+ done
-+ ;;
-+ esac
-+
-+ exp_sym_flag='-bexport'
-+ no_entry_flag='-bnoentry'
-+ fi
-+
-+ # When large executables or shared objects are built, AIX ld can
-+ # have problems creating the table of contents. If linking a library
-+ # or program results in "error TOC overflow" add -mminimal-toc to
-+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+ _LT_AC_TAGVAR(archive_cmds, $1)=''
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+
-+ if test "$GCC" = yes; then
-+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
-+ # We only want to do this on AIX 4.2 and lower, the check
-+ # below for broken collect2 doesn't work under 4.3+
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ else
-+ # We have old collect2
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-+ # It fails to find uninstalled libraries when the uninstalled
-+ # path is not listed in the libpath. Setting hardcode_minus_L
-+ # to unsupported forces relinking
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-+ fi
-+ ;;
-+ esac
-+ shared_flag='-shared'
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag="$shared_flag "'${wl}-G'
-+ fi
-+ else
-+ # not using gcc
-+ if test "$host_cpu" = ia64; then
-+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+ # chokes on -Wl,-G. The following line is correct:
-+ shared_flag='-G'
-+ else
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag='${wl}-G'
-+ else
-+ shared_flag='${wl}-bM:SRE'
-+ fi
-+ fi
-+ fi
-+
-+ # It seems that -bexpall does not export symbols beginning with
-+ # underscore (_), so it is better to generate a list of symbols to export.
-+ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # Warning - without using the other runtime loading flags (-brtl),
-+ # -berok will link without error, but may produce a broken library.
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ _LT_AC_SYS_LIBPATH_AIX
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+ else
-+ if test "$host_cpu" = ia64; then
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+ else
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ _LT_AC_SYS_LIBPATH_AIX
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ # Warning - without using the other run time loading flags,
-+ # -berok will link without error, but may produce a broken library.
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-+ # Exported symbols can be pulled into shared objects from archives
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-+ # This is similar to how AIX traditionally builds its shared libraries.
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+ fi
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ # see comment about different semantics on the GNU ld section
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+
-+ bsdi[[45]]*)
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ # hardcode_libdir_flag_spec is actually meaningless, as there is
-+ # no search path for DLLs.
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-+ # The linker will automatically build a .lib file if we build a DLL.
-+ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
-+ # FIXME: Should let the user specify the lib program.
-+ _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-+ _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
-+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ case $host_os in
-+ rhapsody* | darwin1.[[012]])
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
-+ ;;
-+ *) # Darwin 1.3 on
-+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ else
-+ case ${MACOSX_DEPLOYMENT_TARGET} in
-+ 10.[[012]])
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ ;;
-+ 10.*)
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+ esac
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+ if test "$GCC" = yes ; then
-+ output_verbose_link_cmd='echo'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ else
-+ case $cc_basename in
-+ xlc*)
-+ output_verbose_link_cmd='echo'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
-+ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ dgux*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ freebsd1*)
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+
-+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-+ # support. Future versions do this automatically, but an explicit c++rt0.o
-+ # does not break anything, and helps significantly (at the cost of a little
-+ # extra space).
-+ freebsd2.2*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-+ freebsd2*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-+ freebsd* | dragonfly*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+
-+ # GNU/kFreeBSD uses gcc -shared to do shared libraries.
-+ kfreebsd*-gnu)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=no
-+ ;;
-+
-+ hpux9*)
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ fi
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+ ;;
-+
-+ hpux10*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ fi
-+ ;;
-+
-+ hpux11*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ case $host_cpu in
-+ hppa*64*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ else
-+ case $host_cpu in
-+ hppa*64*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-+ fi
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-+ fi
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-
-- dnl *** For now the libtool support in intl/Makefile is not for real.
-- l=
-- AC_SUBST(l)
-+ newsos6)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-
-- dnl Generate list of files to be processed by xgettext which will
-- dnl be included in po/Makefile.
-- test -d po || mkdir po
-- if test "x$srcdir" != "x."; then
-- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
-- posrcprefix="$srcdir/"
-- else
-- posrcprefix="../$srcdir/"
-- fi
-- else
-- posrcprefix="../"
-- fi
-- rm -f po/POTFILES
-- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
-- < $srcdir/po/POTFILES.in > po/POTFILES
-- ])
-+ openbsd*)
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-+ else
-+ case $host_os in
-+ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ ;;
-+ *)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-+ ;;
-+ esac
-+ fi
-+ ;;
-
-+ os2*)
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-+ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-+ ;;
-
--# Search path for a program which passes the given test.
--# Ulrich Drepper <drepper@cygnus.com>, 1996.
--#
--# This file can be copied and used freely without restrictions. It can
--# be used in projects which are not available under the GNU Public License
--# but which still want to provide support for the GNU gettext functionality.
--# Please note that the actual code is *not* freely available.
-+ osf3*)
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ fi
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ ;;
-
--# serial 1
-+ osf4* | osf5*) # as osf3* with the addition of -msym flag
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-+ else
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
--dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
--dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
--AC_DEFUN(AM_PATH_PROG_WITH_TEST,
--[# Extract the first word of "$2", so it can be a program name with args.
--set dummy $2; ac_word=[$]2
--AC_MSG_CHECKING([for $ac_word])
--AC_CACHE_VAL(ac_cv_path_$1,
--[case "[$]$1" in
-- /*)
-- ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
-- ;;
-- *)
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-- for ac_dir in ifelse([$5], , $PATH, [$5]); do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- if [$3]; then
-- ac_cv_path_$1="$ac_dir/$ac_word"
-- break
-+ # Both c and cxx compiler support -rpath directly
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- fi
-- fi
-- done
-- IFS="$ac_save_ifs"
--dnl If no 4th arg is given, leave the cache variable unset,
--dnl so AC_PATH_PROGS will keep looking.
--ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
--])dnl
-- ;;
--esac])dnl
--$1="$ac_cv_path_$1"
--if test -n "[$]$1"; then
-- AC_MSG_RESULT([$]$1)
--else
-- AC_MSG_RESULT(no)
--fi
--AC_SUBST($1)dnl
--])
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-+ ;;
-
--# Check whether LC_MESSAGES is available in <locale.h>.
--# Ulrich Drepper <drepper@cygnus.com>, 1995.
--#
--# This file can be copied and used freely without restrictions. It can
--# be used in projects which are not available under the GNU Public License
--# but which still want to provide support for the GNU gettext functionality.
--# Please note that the actual code is *not* freely available.
-+ solaris*)
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-+ if test "$GCC" = yes; then
-+ wlarc='${wl}'
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-+ else
-+ wlarc=''
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-+ fi
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ case $host_os in
-+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-+ *)
-+ # The compiler driver will combine linker options so we
-+ # cannot just pass the convience library names through
-+ # without $wl, iff we do not link with $LD.
-+ # Luckily, gcc supports the same syntax we need for Sun Studio.
-+ # Supported since Solaris 2.6 (maybe 2.5.1?)
-+ case $wlarc in
-+ '')
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
-+ *)
-+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
-+ esac ;;
-+ esac
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+ ;;
-
--# serial 1
-+ sunos4*)
-+ if test "x$host_vendor" = xsequent; then
-+ # Use $CC to link under sequent, because it throws in some extra .o
-+ # files that make .init and .fini sections work.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-
--AC_DEFUN(AM_LC_MESSAGES,
-- [if test $ac_cv_header_locale_h = yes; then
-- AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
-- [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
-- am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
-- if test $am_cv_val_LC_MESSAGES = yes; then
-- AC_DEFINE(HAVE_LC_MESSAGES)
-- fi
-- fi])
-+ sysv4)
-+ case $host_vendor in
-+ sni)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-+ ;;
-+ siemens)
-+ ## LD is ld it makes a PLAMLIB
-+ ## CC just makes a GrossModule.
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
-+ ;;
-+ motorola)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-+ ;;
-+ esac
-+ runpath_var='LD_RUN_PATH'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-
--# Do all the work for Automake. This macro actually does too much --
--# some checks are only needed if your package does certain things.
--# But this isn't really a big deal.
-+ sysv4.3*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-+ ;;
-
--# serial 1
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ runpath_var=LD_RUN_PATH
-+ hardcode_runpath_var=yes
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-+ fi
-+ ;;
-
--dnl Usage:
--dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7*)
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-
--AC_DEFUN(AM_INIT_AUTOMAKE,
--[AC_REQUIRE([AC_PROG_INSTALL])
--PACKAGE=[$1]
--AC_SUBST(PACKAGE)
--VERSION=[$2]
--AC_SUBST(VERSION)
--dnl test to see if srcdir already configured
--if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
--fi
--ifelse([$3],,
--AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
--AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
--AC_REQUIRE([AM_SANITY_CHECK])
--AC_REQUIRE([AC_ARG_PROGRAM])
--dnl FIXME This is truly gross.
--missing_dir=`cd $ac_aux_dir && pwd`
--AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
--AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
--AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
--AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
--AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
--AC_REQUIRE([AC_PROG_MAKE_SET])])
-+ sysv5* | sco3.2v5* | sco5v6*)
-+ # Note: We can NOT use -z defs as we might desire, because we do not
-+ # link with -lc, and that would cause any symbols used from libc to
-+ # always be unresolved, which means just about no library would
-+ # ever link correctly. If we're not using GNU ld we use -z text
-+ # though, which does catch some bad symbols but isn't as heavy-handed
-+ # as -z defs.
-+ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-
--#
--# Check to make sure that the build environment is sane.
--#
-+ uts4*)
-+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-+ ;;
-
--AC_DEFUN(AM_SANITY_CHECK,
--[AC_MSG_CHECKING([whether build environment is sane])
--# Just in case
--sleep 1
--echo timestamp > conftestfile
--# Do `set' in a subshell so we don't clobber the current shell's
--# arguments. Must try -L first in case configure is actually a
--# symlink; some systems play weird games with the mod time of symlinks
--# (eg FreeBSD returns the mod time of the symlink's containing
--# directory).
--if (
-- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-- if test "[$]*" = "X"; then
-- # -L didn't work.
-- set X `ls -t $srcdir/configure conftestfile`
-- fi
-- if test "[$]*" != "X $srcdir/configure conftestfile" \
-- && test "[$]*" != "X conftestfile $srcdir/configure"; then
-+ *)
-+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
-+ ;;
-+ esac
-+ fi
-+])
-+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-- # If neither matched, then we have a broken ls. This can happen
-- # if, for instance, CONFIG_SHELL is bash and it inherits a
-- # broken ls alias from the environment. This has actually
-- # happened. Such a system could not be considered "sane".
-- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
--alias in your environment])
-- fi
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
-+x|xyes)
-+ # Assume -lc should be added
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-+
-+ if test "$enable_shared" = yes && test "$GCC" = yes; then
-+ case $_LT_AC_TAGVAR(archive_cmds, $1) in
-+ *'~'*)
-+ # FIXME: we may have to deal with multi-command sequences.
-+ ;;
-+ '$CC '*)
-+ # Test whether the compiler implicitly links with -lc since on some
-+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+ # to ld, don't add -lc before -lgcc.
-+ AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-+ $rm conftest*
-+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-+ soname=conftest
-+ lib=conftest
-+ libobjs=conftest.$ac_objext
-+ deplibs=
-+ wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-+ pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-+ compiler_flags=-v
-+ linker_flags=-v
-+ verstring=
-+ output_objdir=.
-+ libname=conftest
-+ lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-+ if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-+ then
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-+ else
-+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-+ fi
-+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-+ else
-+ cat conftest.err 1>&5
-+ fi
-+ $rm conftest*
-+ AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
-+ ;;
-+ esac
-+ fi
-+ ;;
-+esac
-+])# AC_LIBTOOL_PROG_LD_SHLIBS
-
-- test "[$]2" = conftestfile
-- )
--then
-- # Ok.
-- :
--else
-- AC_MSG_ERROR([newly created file is older than distributed files!
--Check your system clock])
--fi
--rm -f conftest*
--AC_MSG_RESULT(yes)])
-
--dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
--dnl The program must properly implement --version.
--AC_DEFUN(AM_MISSING_PROG,
--[AC_MSG_CHECKING(for working $2)
--# Run test in a subshell; some versions of sh will print an error if
--# an executable is not found, even if stderr is redirected.
--# Redirect stdin to placate older versions of autoconf. Sigh.
--if ($2 --version) < /dev/null > /dev/null 2>&1; then
-- $1=$2
-- AC_MSG_RESULT(found)
--else
-- $1="$3/missing $2"
-- AC_MSG_RESULT(missing)
--fi
--AC_SUBST($1)])
-+# _LT_AC_FILE_LTDLL_C
-+# -------------------
-+# Be careful that the start marker always follows a newline.
-+AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
-+# /* ltdll.c starts here */
-+# #define WIN32_LEAN_AND_MEAN
-+# #include <windows.h>
-+# #undef WIN32_LEAN_AND_MEAN
-+# #include <stdio.h>
-+#
-+# #ifndef __CYGWIN__
-+# # ifdef __CYGWIN32__
-+# # define __CYGWIN__ __CYGWIN32__
-+# # endif
-+# #endif
-+#
-+# #ifdef __cplusplus
-+# extern "C" {
-+# #endif
-+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-+# #ifdef __cplusplus
-+# }
-+# #endif
-+#
-+# #ifdef __CYGWIN__
-+# #include <cygwin/cygwin_dll.h>
-+# DECLARE_CYGWIN_DLL( DllMain );
-+# #endif
-+# HINSTANCE __hDllInstance_base;
-+#
-+# BOOL APIENTRY
-+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-+# {
-+# __hDllInstance_base = hInst;
-+# return TRUE;
-+# }
-+# /* ltdll.c ends here */
-+])# _LT_AC_FILE_LTDLL_C
-+
-+
-+# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
-+# ---------------------------------
-+AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
-+
-+
-+# old names
-+AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
-+AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
-+AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
-+AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-+AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-+AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
-+AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
-+
-+# This is just to silence aclocal about the macro not being used
-+ifelse([AC_DISABLE_FAST_INSTALL])
-+
-+AC_DEFUN([LT_AC_PROG_GCJ],
-+[AC_CHECK_TOOL(GCJ, gcj, no)
-+ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-+ AC_SUBST(GCJFLAGS)
-+])
-
--# Like AC_CONFIG_HEADER, but automatically create stamp file.
-+AC_DEFUN([LT_AC_PROG_RC],
-+[AC_CHECK_TOOL(RC, windres, no)
-+])
-
--AC_DEFUN(AM_CONFIG_HEADER,
--[AC_PREREQ([2.12])
--AC_CONFIG_HEADER([$1])
--dnl When config.status generates a header, we must update the stamp-h file.
--dnl This file resides in the same directory as the config header
--dnl that is generated. We must strip everything past the first ":",
--dnl and everything past the last "/".
--AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
--ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
--<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
--<<am_indx=1
--for am_file in <<$1>>; do
-- case " <<$>>CONFIG_HEADERS " in
-- *" <<$>>am_file "*<<)>>
-- echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
-- ;;
-- esac
-- am_indx=`expr "<<$>>am_indx" + 1`
--done<<>>dnl>>)
--changequote([,]))])
-+# NOTE: This macro has been submitted for inclusion into #
-+# GNU Autoconf as AC_PROG_SED. When it is available in #
-+# a released version of Autoconf we should remove this #
-+# macro and use it instead. #
-+# LT_AC_PROG_SED
-+# --------------
-+# Check for a fully-functional sed program, that truncates
-+# as few characters as possible. Prefer GNU sed if found.
-+AC_DEFUN([LT_AC_PROG_SED],
-+[AC_MSG_CHECKING([for a sed that does not truncate output])
-+AC_CACHE_VAL(lt_cv_path_SED,
-+[# Loop through the user's path and test for sed and gsed.
-+# Then use that list of sed's as ones to test for truncation.
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for lt_ac_prog in sed gsed; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-+ fi
-+ done
-+ done
-+done
-+lt_ac_max=0
-+lt_ac_count=0
-+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-+# along with /bin/sed that truncates output.
-+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-+ test ! -f $lt_ac_sed && continue
-+ cat /dev/null > conftest.in
-+ lt_ac_count=0
-+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-+ # Check for GNU sed and select it if it is found.
-+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-+ lt_cv_path_SED=$lt_ac_sed
-+ break
-+ fi
-+ while true; do
-+ cat conftest.in conftest.in >conftest.tmp
-+ mv conftest.tmp conftest.in
-+ cp conftest.in conftest.nl
-+ echo >>conftest.nl
-+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-+ cmp -s conftest.out conftest.nl || break
-+ # 10000 chars as input seems more than enough
-+ test $lt_ac_count -gt 10 && break
-+ lt_ac_count=`expr $lt_ac_count + 1`
-+ if test $lt_ac_count -gt $lt_ac_max; then
-+ lt_ac_max=$lt_ac_count
-+ lt_cv_path_SED=$lt_ac_sed
-+ fi
-+ done
-+done
-+])
-+SED=$lt_cv_path_SED
-+AC_MSG_RESULT([$SED])
-+])
-
- # Add --enable-maintainer-mode option to configure.
- # From Jim Meyering
-
- # serial 1
-
--AC_DEFUN(AM_MAINTAINER_MODE,
-+AC_DEFUN([AM_MAINTAINER_MODE],
- [AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
- dnl maintainer-mode is disabled by default
- AC_ARG_ENABLE(maintainer-mode,
-@@ -962,7 +7844,7 @@
-
- # Define a conditional.
-
--AC_DEFUN(AM_CONDITIONAL,
-+AC_DEFUN([AM_CONDITIONAL],
- [AC_SUBST($1_TRUE)
- AC_SUBST($1_FALSE)
- if $2; then
-@@ -991,7 +7873,7 @@
- # program @code{ansi2knr}, which comes with Ghostscript.
- # @end defmac
-
--AC_DEFUN(AM_PROG_CC_STDC,
-+AC_DEFUN([AM_PROG_CC_STDC],
- [AC_REQUIRE([AC_PROG_CC])
- AC_BEFORE([$0], [AC_C_INLINE])
- AC_BEFORE([$0], [AC_C_CONST])
-@@ -1258,3 +8140,160 @@
- rm -f conf.glibtest
- ])
-
-+# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
-+#
-+# Copyright ?? 2004 Scott James Remnant <scott@netsplit.com>.
-+#
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+# General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+#
-+# As a special exception to the GNU General Public License, if you
-+# distribute this file as part of a program that contains a
-+# configuration script generated by Autoconf, you may include it under
-+# the same distribution terms that you use for the rest of that program.
-+
-+# PKG_PROG_PKG_CONFIG([MIN-VERSION])
-+# ----------------------------------
-+AC_DEFUN([PKG_PROG_PKG_CONFIG],
-+[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
-+m4_pattern_allow([^PKG_CONFIG(_PATH)?$])
-+AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl
-+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
-+ AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
-+fi
-+if test -n "$PKG_CONFIG"; then
-+ _pkg_min_version=m4_default([$1], [0.9.0])
-+ AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
-+ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
-+ AC_MSG_RESULT([yes])
-+ else
-+ AC_MSG_RESULT([no])
-+ PKG_CONFIG=""
-+ fi
-+
-+fi[]dnl
-+])# PKG_PROG_PKG_CONFIG
-+
-+# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-+#
-+# Check to see whether a particular set of modules exists. Similar
-+# to PKG_CHECK_MODULES(), but does not set variables or print errors.
-+#
-+#
-+# Similar to PKG_CHECK_MODULES, make sure that the first instance of
-+# this or PKG_CHECK_MODULES is called, or make sure to call
-+# PKG_CHECK_EXISTS manually
-+# --------------------------------------------------------------
-+AC_DEFUN([PKG_CHECK_EXISTS],
-+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-+if test -n "$PKG_CONFIG" && \
-+ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
-+ m4_ifval([$2], [$2], [:])
-+m4_ifvaln([$3], [else
-+ $3])dnl
-+fi])
-+
-+
-+# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
-+# ---------------------------------------------
-+m4_define([_PKG_CONFIG],
-+[if test -n "$PKG_CONFIG"; then
-+ if test -n "$$1"; then
-+ pkg_cv_[]$1="$$1"
-+ else
-+ PKG_CHECK_EXISTS([$3],
-+ [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
-+ [pkg_failed=yes])
-+ fi
-+else
-+ pkg_failed=untried
-+fi[]dnl
-+])# _PKG_CONFIG
-+
-+# _PKG_SHORT_ERRORS_SUPPORTED
-+# -----------------------------
-+AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
-+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
-+ _pkg_short_errors_supported=yes
-+else
-+ _pkg_short_errors_supported=no
-+fi[]dnl
-+])# _PKG_SHORT_ERRORS_SUPPORTED
-+
-+
-+# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
-+# [ACTION-IF-NOT-FOUND])
-+#
-+#
-+# Note that if there is a possibility the first call to
-+# PKG_CHECK_MODULES might not happen, you should be sure to include an
-+# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
-+#
-+#
-+# --------------------------------------------------------------
-+AC_DEFUN([PKG_CHECK_MODULES],
-+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-+AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
-+AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
-+
-+pkg_failed=no
-+AC_MSG_CHECKING([for $1])
-+
-+_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
-+_PKG_CONFIG([$1][_LIBS], [libs], [$2])
-+
-+m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
-+and $1[]_LIBS to avoid the need to call pkg-config.
-+See the pkg-config man page for more details.])
-+
-+if test $pkg_failed = yes; then
-+ _PKG_SHORT_ERRORS_SUPPORTED
-+ if test $_pkg_short_errors_supported = yes; then
-+ $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"`
-+ else
-+ $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`
-+ fi
-+ # Put the nasty error message in config.log where it belongs
-+ echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
-+
-+ ifelse([$4], , [AC_MSG_ERROR(dnl
-+[Package requirements ($2) were not met:
-+
-+$$1_PKG_ERRORS
-+
-+Consider adjusting the PKG_CONFIG_PATH environment variable if you
-+installed software in a non-standard prefix.
-+
-+_PKG_TEXT
-+])],
-+ [$4])
-+elif test $pkg_failed = untried; then
-+ ifelse([$4], , [AC_MSG_FAILURE(dnl
-+[The pkg-config script could not be found or is too old. Make sure it
-+is in your PATH or set the PKG_CONFIG environment variable to the full
-+path to pkg-config.
-+
-+_PKG_TEXT
-+
-+To get pkg-config, see <http://www.freedesktop.org/software/pkgconfig>.])],
-+ [$4])
-+else
-+ $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
-+ $1[]_LIBS=$pkg_cv_[]$1[]_LIBS
-+ AC_MSG_RESULT([yes])
-+ ifelse([$3], , :, [$3])
-+fi[]dnl
-+])# PKG_CHECK_MODULES
-+
-diff -urN gtk+-1.2.10.orig/config.h.in gtk+-1.2.10/config.h.in
---- gtk+-1.2.10.orig/config.h.in 2001-02-27 00:49:58.000000000 -0700
-+++ gtk+-1.2.10/config.h.in 2006-07-09 02:29:44.000000000 -0600
-@@ -1,59 +1,19 @@
--/* config.h.in. Generated automatically from configure.in by autoheader. */
-+/* config.h.in. Generated from configure.in by autoheader. */
-+/* acconfig.h
-+ This file is in the public domain.
-+
-+ Descriptive text for the C preprocessor macros that
-+ the distributed Autoconf macros can define.
-+ No software package will use all of them; autoheader copies the ones
-+ your configure.in uses into your configuration header file templates.
-+
-+ The entries are in sort -df order: alphabetical, case insensitive,
-+ ignoring punctuation (such as underscores). Although this order
-+ can split up related entries, it makes it easier to check whether
-+ a given entry is in the file.
-
--/* Define if using alloca.c. */
--#undef C_ALLOCA
--
--/* Define to empty if the keyword does not work. */
--#undef const
--
--/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
-- This function is required for alloca.c support on those systems. */
--#undef CRAY_STACKSEG_END
--
--/* Define to `int' if <sys/types.h> doesn't define. */
--#undef gid_t
--
--/* Define if you have alloca, as a function or macro. */
--#undef HAVE_ALLOCA
--
--/* Define if you have <alloca.h> and it should be used (not on Ultrix). */
--#undef HAVE_ALLOCA_H
--
--/* Define if you have a working `mmap' system call. */
--#undef HAVE_MMAP
--
--/* Define as __inline if that's what the C compiler calls it. */
--#undef inline
--
--/* Define to `long' if <sys/types.h> doesn't define. */
--#undef off_t
--
--/* Define if you need to in order for stat and other things to work. */
--#undef _POSIX_SOURCE
--
--/* Define as the return type of signal handlers (int or void). */
--#undef RETSIGTYPE
--
--/* Define to `unsigned' if <sys/types.h> doesn't define. */
--#undef size_t
--
--/* If using the C implementation of alloca, define if you know the
-- direction of stack growth for your system; otherwise it will be
-- automatically deduced at run-time.
-- STACK_DIRECTION > 0 => grows toward higher addresses
-- STACK_DIRECTION < 0 => grows toward lower addresses
-- STACK_DIRECTION = 0 => direction of growth unknown
-- */
--#undef STACK_DIRECTION
--
--/* Define if you have the ANSI C header files. */
--#undef STDC_HEADERS
--
--/* Define to `int' if <sys/types.h> doesn't define. */
--#undef uid_t
--
--/* Define if the X Window System is missing or not being used. */
--#undef X_DISPLAY_MISSING
-+ Leave the following blank line there!! Autoheader needs it. */
-+\f
-
- /* Other stuff */
- #undef ENABLE_NLS
-@@ -72,6 +32,8 @@
-
- #undef NO_FD_SET
-
-+#undef RESOURCE_BASE
-+
- /* Define to use X11R6 additions to XIM */
- #undef USE_X11R6_XIM
-
-@@ -86,77 +48,122 @@
- /* Define as the return type of signal handlers (int or void). */
- #undef RETSIGTYPE
-
--/* Define if you have the __argz_count function. */
--#undef HAVE___ARGZ_COUNT
-+/* Most machines will be happy with int or void. IRIX requires '...' */
-+#undef SIGNAL_ARG_TYPE
-
--/* Define if you have the __argz_next function. */
--#undef HAVE___ARGZ_NEXT
-+/* #undef PACKAGE */
-+/* #undef VERSION */
-
--/* Define if you have the __argz_stringify function. */
--#undef HAVE___ARGZ_STRINGIFY
-+\f
-+/* Leave that blank line there!! Autoheader needs it.
-+ If you're adding to this file, keep in mind:
-+ The entries are in sort -df order: alphabetical, case insensitive,
-+ ignoring punctuation (such as underscores). */
-+
-+/* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP
-+ systems. This function is required for `alloca.c' support on those systems.
-+ */
-+#undef CRAY_STACKSEG_END
-+
-+/* Define to 1 if using `alloca.c'. */
-+#undef C_ALLOCA
-+
-+/* Define to 1 if you have `alloca', as a function or macro. */
-+#undef HAVE_ALLOCA
-
--/* Define if you have the dcgettext function. */
-+/* Define to 1 if you have <alloca.h> and it should be used (not on Ultrix).
-+ */
-+#undef HAVE_ALLOCA_H
-+
-+/* Define to 1 if you have the <argz.h> header file. */
-+#undef HAVE_ARGZ_H
-+
-+/* Define if the wctype function is broken */
-+#undef HAVE_BROKEN_WCTYPE
-+
-+/* Define to 1 if you have the `dcgettext' function. */
- #undef HAVE_DCGETTEXT
-
--/* Define if you have the getcwd function. */
-+/* Define to 1 if you have the `getcwd' function. */
- #undef HAVE_GETCWD
-
--/* Define if you have the getpagesize function. */
-+/* Define to 1 if you have the `getpagesize' function. */
- #undef HAVE_GETPAGESIZE
-
--/* Define if you have the getresuid function. */
-+/* Define to 1 if you have the `getresuid' function. */
- #undef HAVE_GETRESUID
-
--/* Define if you have the munmap function. */
-+/* Define to 1 if you have the <inttypes.h> header file. */
-+#undef HAVE_INTTYPES_H
-+
-+/* Define to 1 if you have the `i' library (-li). */
-+#undef HAVE_LIBI
-+
-+/* Define to 1 if you have the <limits.h> header file. */
-+#undef HAVE_LIMITS_H
-+
-+/* Define to 1 if you have the <locale.h> header file. */
-+#undef HAVE_LOCALE_H
-+
-+/* Define to 1 if you have the <malloc.h> header file. */
-+#undef HAVE_MALLOC_H
-+
-+/* Define to 1 if you have the <memory.h> header file. */
-+#undef HAVE_MEMORY_H
-+
-+/* Define to 1 if you have a working `mmap' system call. */
-+#undef HAVE_MMAP
-+
-+/* Define to 1 if you have the `munmap' function. */
- #undef HAVE_MUNMAP
-
--/* Define if you have the putenv function. */
-+/* Define to 1 if you have the <nl_types.h> header file. */
-+#undef HAVE_NL_TYPES_H
-+
-+/* Define to 1 if you have the `putenv' function. */
- #undef HAVE_PUTENV
-
--/* Define if you have the setenv function. */
-+/* Define to 1 if you have the `setenv' function. */
- #undef HAVE_SETENV
-
--/* Define if you have the setlocale function. */
-+/* Define to 1 if you have the `setlocale' function. */
- #undef HAVE_SETLOCALE
-
--/* Define if you have the stpcpy function. */
-+/* Define to 1 if you have the <stdint.h> header file. */
-+#undef HAVE_STDINT_H
-+
-+/* Define to 1 if you have the <stdlib.h> header file. */
-+#undef HAVE_STDLIB_H
-+
-+/* Define to 1 if you have the `stpcpy' function. */
- #undef HAVE_STPCPY
-
--/* Define if you have the strcasecmp function. */
-+/* Define to 1 if you have the `strcasecmp' function. */
- #undef HAVE_STRCASECMP
-
--/* Define if you have the strchr function. */
-+/* Define to 1 if you have the `strchr' function. */
- #undef HAVE_STRCHR
-
--/* Define if you have the strdup function. */
-+/* Define to 1 if you have the `strdup' function. */
- #undef HAVE_STRDUP
-
--/* Define if you have the <argz.h> header file. */
--#undef HAVE_ARGZ_H
--
--/* Define if you have the <limits.h> header file. */
--#undef HAVE_LIMITS_H
-+/* Define to 1 if you have the <strings.h> header file. */
-+#undef HAVE_STRINGS_H
-
--/* Define if you have the <locale.h> header file. */
--#undef HAVE_LOCALE_H
--
--/* Define if you have the <malloc.h> header file. */
--#undef HAVE_MALLOC_H
--
--/* Define if you have the <nl_types.h> header file. */
--#undef HAVE_NL_TYPES_H
--
--/* Define if you have the <string.h> header file. */
-+/* Define to 1 if you have the <string.h> header file. */
- #undef HAVE_STRING_H
-
--/* Define if you have the <sys/param.h> header file. */
-+/* Define to 1 if you have the <sys/param.h> header file. */
- #undef HAVE_SYS_PARAM_H
-
--/* Define if you have the <unistd.h> header file. */
--#undef HAVE_UNISTD_H
-+/* Define to 1 if you have the <sys/stat.h> header file. */
-+#undef HAVE_SYS_STAT_H
-
--/* Define if you have the i library (-li). */
--#undef HAVE_LIBI
-+/* Define to 1 if you have the <sys/types.h> header file. */
-+#undef HAVE_SYS_TYPES_H
-+
-+/* Define to 1 if you have the <unistd.h> header file. */
-+#undef HAVE_UNISTD_H
-
- /* Define if wchar.h exists */
- #undef HAVE_WCHAR_H
-@@ -164,6 +171,70 @@
- /* Define if wctype.h exists */
- #undef HAVE_WCTYPE_H
-
--/* Define if the wctype function is broken */
--#undef HAVE_BROKEN_WCTYPE
-+/* Define to 1 if you have the `__argz_count' function. */
-+#undef HAVE___ARGZ_COUNT
-+
-+/* Define to 1 if you have the `__argz_next' function. */
-+#undef HAVE___ARGZ_NEXT
-+
-+/* Define to 1 if you have the `__argz_stringify' function. */
-+#undef HAVE___ARGZ_STRINGIFY
-
-+/* Name of package */
-+#undef PACKAGE
-+
-+/* Define to the address where bug reports for this package should be sent. */
-+#undef PACKAGE_BUGREPORT
-+
-+/* Define to the full name of this package. */
-+#undef PACKAGE_NAME
-+
-+/* Define to the full name and version of this package. */
-+#undef PACKAGE_STRING
-+
-+/* Define to the one symbol short name of this package. */
-+#undef PACKAGE_TARNAME
-+
-+/* Define to the version of this package. */
-+#undef PACKAGE_VERSION
-+
-+/* Define as the return type of signal handlers (`int' or `void'). */
-+#undef RETSIGTYPE
-+
-+/* If using the C implementation of alloca, define if you know the
-+ direction of stack growth for your system; otherwise it will be
-+ automatically deduced at run-time.
-+ STACK_DIRECTION > 0 => grows toward higher addresses
-+ STACK_DIRECTION < 0 => grows toward lower addresses
-+ STACK_DIRECTION = 0 => direction of growth unknown */
-+#undef STACK_DIRECTION
-+
-+/* Define to 1 if you have the ANSI C header files. */
-+#undef STDC_HEADERS
-+
-+/* Version number of package */
-+#undef VERSION
-+
-+/* Define to 1 if the X Window System is missing or not being used. */
-+#undef X_DISPLAY_MISSING
-+
-+/* Define to empty if `const' does not conform to ANSI C. */
-+#undef const
-+
-+/* Define to `int' if <sys/types.h> doesn't define. */
-+#undef gid_t
-+
-+/* Define to `__inline__' or `__inline' if that's what the C compiler
-+ calls it, or to nothing if 'inline' is not supported under any name. */
-+#ifndef __cplusplus
-+#undef inline
-+#endif
-+
-+/* Define to `long' if <sys/types.h> does not define. */
-+#undef off_t
-+
-+/* Define to `unsigned' if <sys/types.h> does not define. */
-+#undef size_t
-+
-+/* Define to `int' if <sys/types.h> doesn't define. */
-+#undef uid_t
-diff -urN gtk+-1.2.10.orig/configure gtk+-1.2.10/configure
---- gtk+-1.2.10.orig/configure 2001-03-28 14:11:45.000000000 -0700
-+++ gtk+-1.2.10/configure 2006-07-09 02:29:47.000000000 -0600
-@@ -1,16 +1,245 @@
- #! /bin/sh
--
- # Guess values for system-dependent variables and create Makefiles.
--# Generated automatically using autoconf version 2.13
--# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-+# Generated by GNU Autoconf 2.59.
- #
-+# Copyright (C) 2003 Free Software Foundation, Inc.
- # This configure script is free software; the Free Software Foundation
- # gives unlimited permission to copy, distribute and modify it.
-+## --------------------- ##
-+## M4sh Initialization. ##
-+## --------------------- ##
-+
-+# Be Bourne compatible
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-+ set -o posix
-+fi
-+DUALCASE=1; export DUALCASE # for MKS sh
-+
-+# Support unset when possible.
-+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-+ as_unset=unset
-+else
-+ as_unset=false
-+fi
-+
-+
-+# Work around bugs in pre-3.0 UWIN ksh.
-+$as_unset ENV MAIL MAILPATH
-+PS1='$ '
-+PS2='> '
-+PS4='+ '
-+
-+# NLS nuisances.
-+for as_var in \
-+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-+ LC_TELEPHONE LC_TIME
-+do
-+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-+ eval $as_var=C; export $as_var
-+ else
-+ $as_unset $as_var
-+ fi
-+done
-+
-+# Required to use basename.
-+if expr a : '\(a\)' >/dev/null 2>&1; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-+ as_basename=basename
-+else
-+ as_basename=false
-+fi
-+
-+
-+# Name of the executable.
-+as_me=`$as_basename "$0" ||
-+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-+ X"$0" : 'X\(//\)$' \| \
-+ X"$0" : 'X\(/\)$' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X/"$0" |
-+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-+ /^X\/\(\/\/\)$/{ s//\1/; q; }
-+ /^X\/\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+
-+
-+# PATH needs CR, and LINENO needs CR and PATH.
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
-+fi
-+
-+
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x$as_lineno_3" = "x$as_lineno_2" || {
-+ # Find who we are. Look in the path if we contain no path at all
-+ # relative or not.
-+ case $0 in
-+ *[\\/]* ) as_myself=$0 ;;
-+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+
-+ ;;
-+ esac
-+ # We did not find ourselves, most probably we were run as `sh COMMAND'
-+ # in which case we are not to be found in the path.
-+ if test "x$as_myself" = x; then
-+ as_myself=$0
-+ fi
-+ if test ! -f "$as_myself"; then
-+ { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-+ { (exit 1); exit 1; }; }
-+ fi
-+ case $CONFIG_SHELL in
-+ '')
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for as_base in sh bash ksh sh5; do
-+ case $as_dir in
-+ /*)
-+ if ("$as_dir/$as_base" -c '
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
-+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-+ CONFIG_SHELL=$as_dir/$as_base
-+ export CONFIG_SHELL
-+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-+ fi;;
-+ esac
-+ done
-+done
-+;;
-+ esac
-+
-+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-+ # uniformly replaced by the line number. The first 'sed' inserts a
-+ # line-number line before each line; the second 'sed' does the real
-+ # work. The second script uses 'N' to pair each line-number line
-+ # with the numbered line, and appends trailing '-' during
-+ # substitution so that $LINENO is not a special case at line end.
-+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
-+ sed '=' <$as_myself |
-+ sed '
-+ N
-+ s,$,-,
-+ : loop
-+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-+ t loop
-+ s,-$,,
-+ s,^['$as_cr_digits']*\n,,
-+ ' >$as_me.lineno &&
-+ chmod +x $as_me.lineno ||
-+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-+ { (exit 1); exit 1; }; }
-+
-+ # Don't try to exec as it changes $[0], causing all sort of problems
-+ # (the dirname of $[0] is not the place where we might find the
-+ # original and so on. Autoconf is especially sensible to this).
-+ . ./$as_me.lineno
-+ # Exit status is that of the last command.
-+ exit
-+}
-+
-+
-+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-+ *c*,-n*) ECHO_N= ECHO_C='
-+' ECHO_T=' ' ;;
-+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-+esac
-+
-+if expr a : '\(a\)' >/dev/null 2>&1; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+rm -f conf$$ conf$$.exe conf$$.file
-+echo >conf$$.file
-+if ln -s conf$$.file conf$$ 2>/dev/null; then
-+ # We could just check for DJGPP; but this test a) works b) is more generic
-+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-+ if test -f conf$$.exe; then
-+ # Don't use ln at all; we don't have any links
-+ as_ln_s='cp -p'
-+ else
-+ as_ln_s='ln -s'
-+ fi
-+elif ln conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s=ln
-+else
-+ as_ln_s='cp -p'
-+fi
-+rm -f conf$$ conf$$.exe conf$$.file
-+
-+if mkdir -p . 2>/dev/null; then
-+ as_mkdir_p=:
-+else
-+ test -d ./-p && rmdir ./-p
-+ as_mkdir_p=false
-+fi
-+
-+as_executable_p="test -f"
-+
-+# Sed expression to map a string onto a valid CPP name.
-+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-+
-+# Sed expression to map a string onto a valid variable name.
-+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-+
-+
-+# IFS
-+# We need space, tab and new line, in precisely that order.
-+as_nl='
-+'
-+IFS=" $as_nl"
-+
-+# CDPATH.
-+$as_unset CDPATH
-
--# Defaults:
--ac_help=
--ac_default_prefix=/usr/local
--# Any additions from configure.in:
- #
- # Making releases:
- # GTK_MICRO_VERSION += 1;
-@@ -26,66 +255,246 @@
- GTK_INTERFACE_AGE=1
- GTK_BINARY_AGE=10
- GTK_VERSION=$GTK_MAJOR_VERSION.$GTK_MINOR_VERSION.$GTK_MICRO_VERSION
--ac_help="$ac_help
-- --enable-shared[=PKGS] build shared libraries [default=yes]"
--ac_help="$ac_help
-- --enable-static[=PKGS] build static libraries [default=yes]"
--ac_help="$ac_help
-- --enable-fast-install[=PKGS] optimize for fast installation [default=yes]"
--ac_help="$ac_help
-- --with-gnu-ld assume the C compiler uses GNU ld [default=no]"
--ac_help="$ac_help
-- --disable-libtool-lock avoid locking (might break parallel builds)"
--ac_help="$ac_help
-- --enable-maintainer-mode enable make rules and dependencies not useful
-- (and sometimes confusing) to the casual installer"
-+
-+
-+# Check that we are running under the correct shell.
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+
-+case X$ECHO in
-+X*--fallback-echo)
-+ # Remove one level of quotation (which was required for Make).
-+ ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
-+ ;;
-+esac
-+
-+echo=${ECHO-echo}
-+if test "X$1" = X--no-reexec; then
-+ # Discard the --no-reexec flag, and continue.
-+ shift
-+elif test "X$1" = X--fallback-echo; then
-+ # Avoid inline document here, it may be left over
-+ :
-+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-+ # Yippee, $echo works!
-+ :
-+else
-+ # Restart under the correct shell.
-+ exec $SHELL "$0" --no-reexec ${1+"$@"}
-+fi
-+
-+if test "X$1" = X--fallback-echo; then
-+ # used as fallback echo
-+ shift
-+ cat <<EOF
-+$*
-+EOF
-+ exit 0
-+fi
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-+
-+if test -z "$ECHO"; then
-+if test "X${echo_test_string+set}" != Xset; then
-+# find a string as large as possible, as long as the shell can cope with it
-+ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
-+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-+ if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-+ echo_test_string=`eval $cmd` &&
-+ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-+ then
-+ break
-+ fi
-+ done
-+fi
-+
-+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ :
-+else
-+ # The Solaris, AIX, and Digital Unix default echo programs unquote
-+ # backslashes. This makes it impossible to quote backslashes using
-+ # echo "$something" | sed 's/\\/\\\\/g'
-+ #
-+ # So, first we look for a working echo in the user's PATH.
-+
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for dir in $PATH /usr/ucb; do
-+ IFS="$lt_save_ifs"
-+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ echo="$dir/echo"
-+ break
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+
-+ if test "X$echo" = Xecho; then
-+ # We didn't find a better echo, so look for alternatives.
-+ if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ # This shell has a builtin print -r that does the trick.
-+ echo='print -r'
-+ elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-+ test "X$CONFIG_SHELL" != X/bin/ksh; then
-+ # If we have ksh, try running configure again with it.
-+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-+ export ORIGINAL_CONFIG_SHELL
-+ CONFIG_SHELL=/bin/ksh
-+ export CONFIG_SHELL
-+ exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
-+ else
-+ # Try using printf.
-+ echo='printf %s\n'
-+ if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ # Cool, printf works
-+ :
-+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-+ test "X$echo_testing_string" = 'X\t' &&
-+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-+ export CONFIG_SHELL
-+ SHELL="$CONFIG_SHELL"
-+ export SHELL
-+ echo="$CONFIG_SHELL $0 --fallback-echo"
-+ elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-+ test "X$echo_testing_string" = 'X\t' &&
-+ echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-+ test "X$echo_testing_string" = "X$echo_test_string"; then
-+ echo="$CONFIG_SHELL $0 --fallback-echo"
-+ else
-+ # maybe with a smaller string...
-+ prev=:
-+
-+ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
-+ if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-+ then
-+ break
-+ fi
-+ prev="$cmd"
-+ done
-+
-+ if test "$prev" != 'sed 50q "$0"'; then
-+ echo_test_string=`eval $prev`
-+ export echo_test_string
-+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
-+ else
-+ # Oops. We lost completely, so just stick with echo.
-+ echo=echo
-+ fi
-+ fi
-+ fi
-+ fi
-+fi
-+fi
-+
-+# Copy echo and quote the copy suitably for passing to libtool from
-+# the Makefile, instead of quoting the original, which is used later.
-+ECHO=$echo
-+if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
-+ ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-+fi
-+
-+
-+
-+
-+tagnames=${tagnames+${tagnames},}CXX
-+
-+tagnames=${tagnames+${tagnames},}F77
-+
- if test `expr $GTK_MINOR_VERSION \% 2` = 1 ; then
- debug_default=yes
- else
- debug_default=minimum
- fi
--ac_help="$ac_help
-- --enable-debug=[no/minimum/yes] turn on debugging [default=$debug_default]"
--ac_help="$ac_help
-- --enable-shm support shared memory if available [default=yes]"
--ac_help="$ac_help
-- --enable-ansi turn on strict ansi [default=no]"
--ac_help="$ac_help
-- --with-glib=DIR Use uninstalled copy of glib"
--ac_help="$ac_help
-- --enable-xim support XIM [default=yes]"
--ac_help="$ac_help
-- --disable-xim-inst does not use xim instantiate callback"
--ac_help="$ac_help
-- --disable-rebuilds disable all source autogeneration rules"
--ac_help="$ac_help
-- --with-locale=LOCALE locale name you want to use "
--ac_help="$ac_help
-- --with-xinput=[no/gxi/xfree] support XInput "
--ac_help="$ac_help
-- --with-native-locale=[yes/no] Use native locale support [default=no]"
--ac_help="$ac_help
-- --disable-nls do not use Native Language Support"
--ac_help="$ac_help
-- --with-catgets use catgets functions if available"
--ac_help="$ac_help
-- --with-glib-prefix=PFX Prefix where GLIB is installed (optional)"
--ac_help="$ac_help
-- --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)"
--ac_help="$ac_help
-- --disable-glibtest Do not try to compile and run a test GLIB program"
--ac_help="$ac_help
-- --with-x use the X Window System"
-+
-+# Name of the host.
-+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-+# so uname gets run too.
-+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-+
-+exec 6>&1
-+
-+#
-+# Initializations.
-+#
-+ac_default_prefix=/usr/local
-+ac_config_libobj_dir=.
-+cross_compiling=no
-+subdirs=
-+MFLAGS=
-+MAKEFLAGS=
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+
-+# Maximum number of lines to put in a shell here document.
-+# This variable seems obsolete. It should probably be removed, and
-+# only ac_max_sed_lines should be used.
-+: ${ac_max_here_lines=38}
-+
-+# Identity of this package.
-+PACKAGE_NAME=
-+PACKAGE_TARNAME=
-+PACKAGE_VERSION=
-+PACKAGE_STRING=
-+PACKAGE_BUGREPORT=
-+
-+ac_unique_file="gdk/gdktypes.h"
-+# Factoring default headers for most tests.
-+ac_includes_default="\
-+#include <stdio.h>
-+#if HAVE_SYS_TYPES_H
-+# include <sys/types.h>
-+#endif
-+#if HAVE_SYS_STAT_H
-+# include <sys/stat.h>
-+#endif
-+#if STDC_HEADERS
-+# include <stdlib.h>
-+# include <stddef.h>
-+#else
-+# if HAVE_STDLIB_H
-+# include <stdlib.h>
-+# endif
-+#endif
-+#if HAVE_STRING_H
-+# if !STDC_HEADERS && HAVE_MEMORY_H
-+# include <memory.h>
-+# endif
-+# include <string.h>
-+#endif
-+#if HAVE_STRINGS_H
-+# include <strings.h>
-+#endif
-+#if HAVE_INTTYPES_H
-+# include <inttypes.h>
-+#else
-+# if HAVE_STDINT_H
-+# include <stdint.h>
-+# endif
-+#endif
-+#if HAVE_UNISTD_H
-+# include <unistd.h>
-+#endif"
-+
-+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS GTK_MAJOR_VERSION GTK_MINOR_VERSION GTK_MICRO_VERSION GTK_INTERFACE_AGE GTK_BINARY_AGE GTK_VERSION LT_RELEASE LT_CURRENT LT_REVISION LT_AGE INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO SET_MAKE build build_cpu build_vendor build_os host host_cpu host_vendor host_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB STRIP ac_ct_STRIP CPP CXX CXXFLAGS ac_ct_CXX CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT AWK PERL INDENT REBUILD STRIP_DUMMY STRIP_BEGIN STRIP_END ALLOCA USE_NLS MSGFMT GMSGFMT X
GETTEXT GENCAT USE_INCLUDED_LIBINTL CATALOGS CATOBJEXT DATADIRNAME GMOFILES INSTOBJEXT INTLDEPS INTLLIBS INTLOBJS POFILES POSUB INCLUDE_LOCALE_H GT_NO GT_YES MKINSTALLDIRS l gtklocaledir GLIB_CONFIG GLIB_CFLAGS GLIB_LIBS glib_cflags glib_libs glib_thread_cflags glib_thread_libs GLIB_DEPLIBS X_CFLAGS X_PRE_LIBS X_LIBS X_EXTRA_LIBS PKG_CONFIG ac_pt_PKG_CONFIG x_cflags x_includes x_ldflags x_libs xinput_progs GDK_WLIBS GTK_DEBUG_FLAGS GTK_XIM_FLAGS GTK_LOCALE_FLAGS LIBOBJS LTLIBOBJS'
-+ac_subst_files=''
-
- # Initialize some variables set by options.
-+ac_init_help=
-+ac_init_version=false
- # The variables have the same names as the options, with
- # dashes changed to underlines.
--build=NONE
--cache_file=./config.cache
-+cache_file=/dev/null
- exec_prefix=NONE
--host=NONE
- no_create=
--nonopt=NONE
- no_recursion=
- prefix=NONE
- program_prefix=NONE
-@@ -94,10 +503,15 @@
- silent=
- site=
- srcdir=
--target=NONE
- verbose=
- x_includes=NONE
- x_libraries=NONE
-+
-+# Installation directory options.
-+# These are left unexpanded so users can "make install exec_prefix=/foo"
-+# and all the variables that are supposed to be based on exec_prefix
-+# by default will actually change.
-+# Use braces instead of parens because sh, perl, etc. also accept them.
- bindir='${exec_prefix}/bin'
- sbindir='${exec_prefix}/sbin'
- libexecdir='${exec_prefix}/libexec'
-@@ -111,17 +525,9 @@
- infodir='${prefix}/info'
- mandir='${prefix}/man'
-
--# Initialize some other variables.
--subdirs=
--MFLAGS= MAKEFLAGS=
--SHELL=${CONFIG_SHELL-/bin/sh}
--# Maximum number of lines to put in a shell here document.
--ac_max_here_lines=12
--
- ac_prev=
- for ac_option
- do
--
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval "$ac_prev=\$ac_option"
-@@ -129,59 +535,59 @@
- continue
- fi
-
-- case "$ac_option" in
-- -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-- *) ac_optarg= ;;
-- esac
-+ ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
-- case "$ac_option" in
-+ case $ac_option in
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-- bindir="$ac_optarg" ;;
-+ bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
-- ac_prev=build ;;
-+ ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-- build="$ac_optarg" ;;
-+ build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-- cache_file="$ac_optarg" ;;
-+ cache_file=$ac_optarg ;;
-+
-+ --config-cache | -C)
-+ cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
- | --da=*)
-- datadir="$ac_optarg" ;;
-+ datadir=$ac_optarg ;;
-
- -disable-* | --disable-*)
-- ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
-- if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-- fi
-- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-- eval "enable_${ac_feature}=no" ;;
-+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-+ eval "enable_$ac_feature=no" ;;
-
- -enable-* | --enable-*)
-- ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
-- if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-- fi
-- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-- case "$ac_option" in
-- *=*) ;;
-+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-+ case $ac_option in
-+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
-- eval "enable_${ac_feature}='$ac_optarg'" ;;
-+ eval "enable_$ac_feature='$ac_optarg'" ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-@@ -190,95 +596,47 @@
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
-- exec_prefix="$ac_optarg" ;;
-+ exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
-- -help | --help | --hel | --he)
-- # Omit some internal or obsolete options to make the list less imposing.
-- # This message is too long to be a string in the A/UX 3.1 sh.
-- cat << EOF
--Usage: configure [options] [host]
--Options: [defaults in brackets after descriptions]
--Configuration:
-- --cache-file=FILE cache test results in FILE
-- --help print this message
-- --no-create do not create output files
-- --quiet, --silent do not print \`checking...' messages
-- --version print the version of autoconf that created configure
--Directory and file names:
-- --prefix=PREFIX install architecture-independent files in PREFIX
-- [$ac_default_prefix]
-- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
-- [same as prefix]
-- --bindir=DIR user executables in DIR [EPREFIX/bin]
-- --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
-- --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
-- --datadir=DIR read-only architecture-independent data in DIR
-- [PREFIX/share]
-- --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
-- --sharedstatedir=DIR modifiable architecture-independent data in DIR
-- [PREFIX/com]
-- --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
-- --libdir=DIR object code libraries in DIR [EPREFIX/lib]
-- --includedir=DIR C header files in DIR [PREFIX/include]
-- --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
-- --infodir=DIR info documentation in DIR [PREFIX/info]
-- --mandir=DIR man documentation in DIR [PREFIX/man]
-- --srcdir=DIR find the sources in DIR [configure dir or ..]
-- --program-prefix=PREFIX prepend PREFIX to installed program names
-- --program-suffix=SUFFIX append SUFFIX to installed program names
-- --program-transform-name=PROGRAM
-- run sed PROGRAM on installed program names
--EOF
-- cat << EOF
--Host type:
-- --build=BUILD configure for building on BUILD [BUILD=HOST]
-- --host=HOST configure for HOST [guessed]
-- --target=TARGET configure for TARGET [TARGET=HOST]
--Features and packages:
-- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
-- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
-- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
-- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
-- --x-includes=DIR X include files are in DIR
-- --x-libraries=DIR X library files are in DIR
--EOF
-- if test -n "$ac_help"; then
-- echo "--enable and --with options recognized:$ac_help"
-- fi
-- exit 0 ;;
-+ -help | --help | --hel | --he | -h)
-+ ac_init_help=long ;;
-+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-+ ac_init_help=recursive ;;
-+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-+ ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
-- ac_prev=host ;;
-+ ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
-- host="$ac_optarg" ;;
-+ host_alias=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
-- includedir="$ac_optarg" ;;
-+ includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-- infodir="$ac_optarg" ;;
-+ infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
-- libdir="$ac_optarg" ;;
-+ libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
-- libexecdir="$ac_optarg" ;;
-+ libexecdir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst \
-@@ -287,19 +645,19 @@
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-- localstatedir="$ac_optarg" ;;
-+ localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-- mandir="$ac_optarg" ;;
-+ mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-- | --no-cr | --no-c)
-+ | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-@@ -313,26 +671,26 @@
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-- oldincludedir="$ac_optarg" ;;
-+ oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-- prefix="$ac_optarg" ;;
-+ prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-- program_prefix="$ac_optarg" ;;
-+ program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-- program_suffix="$ac_optarg" ;;
-+ program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
-@@ -349,7 +707,7 @@
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
-- program_transform_name="$ac_optarg" ;;
-+ program_transform_name=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
-@@ -359,7 +717,7 @@
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
-- sbindir="$ac_optarg" ;;
-+ sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-@@ -370,58 +728,57 @@
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
-- sharedstatedir="$ac_optarg" ;;
-+ sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
-- site="$ac_optarg" ;;
-+ site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-- srcdir="$ac_optarg" ;;
-+ srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-- sysconfdir="$ac_optarg" ;;
-+ sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
-- ac_prev=target ;;
-+ ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-- target="$ac_optarg" ;;
-+ target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
-- -version | --version | --versio | --versi | --vers)
-- echo "configure generated by autoconf version 2.13"
-- exit 0 ;;
-+ -version | --version | --versio | --versi | --vers | -V)
-+ ac_init_version=: ;;
-
- -with-* | --with-*)
-- ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
-- if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-- fi
-+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid package name: $ac_package" >&2
-+ { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package| sed 's/-/_/g'`
-- case "$ac_option" in
-- *=*) ;;
-+ case $ac_option in
-+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
-- eval "with_${ac_package}='$ac_optarg'" ;;
-+ eval "with_$ac_package='$ac_optarg'" ;;
-
- -without-* | --without-*)
-- ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
-- if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-- fi
-- ac_package=`echo $ac_package| sed 's/-/_/g'`
-- eval "with_${ac_package}=no" ;;
-+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid package name: $ac_package" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_package=`echo $ac_package | sed 's/-/_/g'`
-+ eval "with_$ac_package=no" ;;
-
- --x)
- # Obsolete; use --with-x.
-@@ -432,99 +789,110 @@
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-- x_includes="$ac_optarg" ;;
-+ x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-- x_libraries="$ac_optarg" ;;
-+ x_libraries=$ac_optarg ;;
-
-- -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-+ -*) { echo "$as_me: error: unrecognized option: $ac_option
-+Try \`$0 --help' for more information." >&2
-+ { (exit 1); exit 1; }; }
- ;;
-
-+ *=*)
-+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-+ # Reject names that are not valid shell variable names.
-+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-+ eval "$ac_envvar='$ac_optarg'"
-+ export $ac_envvar ;;
-+
- *)
-- if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-- echo "configure: warning: $ac_option: invalid host type" 1>&2
-- fi
-- if test "x$nonopt" != xNONE; then
-- { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-- fi
-- nonopt="$ac_option"
-+ # FIXME: should be removed in autoconf 3.0.
-+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
- ;;
-
- esac
- done
-
- if test -n "$ac_prev"; then
-- { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-+ { echo "$as_me: error: missing argument to $ac_option" >&2
-+ { (exit 1); exit 1; }; }
- fi
-
--trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
--
--# File descriptor usage:
--# 0 standard input
--# 1 file creation
--# 2 errors and warnings
--# 3 some systems may open it to /dev/tty
--# 4 used on the Kubota Titan
--# 6 checking for... messages and results
--# 5 compiler messages saved in config.log
--if test "$silent" = yes; then
-- exec 6>/dev/null
--else
-- exec 6>&1
--fi
--exec 5>./config.log
--
--echo "\
--This file contains any messages produced by compilers while
--running configure, to aid debugging if configure makes a mistake.
--" 1>&5
-+# Be sure to have absolute paths.
-+for ac_var in exec_prefix prefix
-+do
-+ eval ac_val=$`echo $ac_var`
-+ case $ac_val in
-+ [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-+ { (exit 1); exit 1; }; };;
-+ esac
-+done
-
--# Strip out --no-create and --no-recursion so they do not pile up.
--# Also quote any args containing shell metacharacters.
--ac_configure_args=
--for ac_arg
-+# Be sure to have absolute paths.
-+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-+ localstatedir libdir includedir oldincludedir infodir mandir
- do
-- case "$ac_arg" in
-- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-- | --no-cr | --no-c) ;;
-- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-- ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-- *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-+ eval ac_val=$`echo $ac_var`
-+ case $ac_val in
-+ [\\/$]* | ?:[\\/]* ) ;;
-+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-+ { (exit 1); exit 1; }; };;
- esac
- done
-
--# NLS nuisances.
--# Only set these to C if already set. These must not be set unconditionally
--# because not all systems understand e.g. LANG=C (notably SCO).
--# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
--# Non-C LC_CTYPE values break the ctype check.
--if test "${LANG+set}" = set; then LANG=C; export LANG; fi
--if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
--if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
--if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
-+# There might be people who depend on the old broken behavior: `$host'
-+# used to hold the argument of --host etc.
-+# FIXME: To remove some day.
-+build=$build_alias
-+host=$host_alias
-+target=$target_alias
-+
-+# FIXME: To remove some day.
-+if test "x$host_alias" != x; then
-+ if test "x$build_alias" = x; then
-+ cross_compiling=maybe
-+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-+ If a cross compiler is detected then cross compile mode will be used." >&2
-+ elif test "x$build_alias" != "x$host_alias"; then
-+ cross_compiling=yes
-+ fi
-+fi
-
--# confdefs.h avoids OS command line length limits that DEFS can exceed.
--rm -rf conftest* confdefs.h
--# AIX cpp loses on an empty file, so make sure it contains at least a newline.
--echo > confdefs.h
-+ac_tool_prefix=
-+test -n "$host_alias" && ac_tool_prefix=$host_alias-
-+
-+test "$silent" = yes && exec 6>/dev/null
-
--# A filename unique to this package, relative to the directory that
--# configure is in, which we can look for to find out if srcdir is correct.
--ac_unique_file=gdk/gdktypes.h
-
- # Find the source files, if location was not specified.
- if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then its parent.
-- ac_prog=$0
-- ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-- test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-+ ac_confdir=`(dirname "$0") 2>/dev/null ||
-+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$0" : 'X\(//\)[^/]' \| \
-+ X"$0" : 'X\(//\)$' \| \
-+ X"$0" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$0" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r $srcdir/$ac_unique_file; then
- srcdir=..
-@@ -534,116 +902,719 @@
- fi
- if test ! -r $srcdir/$ac_unique_file; then
- if test "$ac_srcdir_defaulted" = yes; then
-- { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-+ { (exit 1); exit 1; }; }
- else
-- { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-+ { (exit 1); exit 1; }; }
- fi
- fi
--srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
-+ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
-+ { (exit 1); exit 1; }; }
-+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-+ac_env_build_alias_set=${build_alias+set}
-+ac_env_build_alias_value=$build_alias
-+ac_cv_env_build_alias_set=${build_alias+set}
-+ac_cv_env_build_alias_value=$build_alias
-+ac_env_host_alias_set=${host_alias+set}
-+ac_env_host_alias_value=$host_alias
-+ac_cv_env_host_alias_set=${host_alias+set}
-+ac_cv_env_host_alias_value=$host_alias
-+ac_env_target_alias_set=${target_alias+set}
-+ac_env_target_alias_value=$target_alias
-+ac_cv_env_target_alias_set=${target_alias+set}
-+ac_cv_env_target_alias_value=$target_alias
-+ac_env_CC_set=${CC+set}
-+ac_env_CC_value=$CC
-+ac_cv_env_CC_set=${CC+set}
-+ac_cv_env_CC_value=$CC
-+ac_env_CFLAGS_set=${CFLAGS+set}
-+ac_env_CFLAGS_value=$CFLAGS
-+ac_cv_env_CFLAGS_set=${CFLAGS+set}
-+ac_cv_env_CFLAGS_value=$CFLAGS
-+ac_env_LDFLAGS_set=${LDFLAGS+set}
-+ac_env_LDFLAGS_value=$LDFLAGS
-+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-+ac_cv_env_LDFLAGS_value=$LDFLAGS
-+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-+ac_env_CPPFLAGS_value=$CPPFLAGS
-+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-+ac_env_CPP_set=${CPP+set}
-+ac_env_CPP_value=$CPP
-+ac_cv_env_CPP_set=${CPP+set}
-+ac_cv_env_CPP_value=$CPP
-+ac_env_CXX_set=${CXX+set}
-+ac_env_CXX_value=$CXX
-+ac_cv_env_CXX_set=${CXX+set}
-+ac_cv_env_CXX_value=$CXX
-+ac_env_CXXFLAGS_set=${CXXFLAGS+set}
-+ac_env_CXXFLAGS_value=$CXXFLAGS
-+ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set}
-+ac_cv_env_CXXFLAGS_value=$CXXFLAGS
-+ac_env_CXXCPP_set=${CXXCPP+set}
-+ac_env_CXXCPP_value=$CXXCPP
-+ac_cv_env_CXXCPP_set=${CXXCPP+set}
-+ac_cv_env_CXXCPP_value=$CXXCPP
-+ac_env_F77_set=${F77+set}
-+ac_env_F77_value=$F77
-+ac_cv_env_F77_set=${F77+set}
-+ac_cv_env_F77_value=$F77
-+ac_env_FFLAGS_set=${FFLAGS+set}
-+ac_env_FFLAGS_value=$FFLAGS
-+ac_cv_env_FFLAGS_set=${FFLAGS+set}
-+ac_cv_env_FFLAGS_value=$FFLAGS
-+ac_env_PKG_CONFIG_set=${PKG_CONFIG+set}
-+ac_env_PKG_CONFIG_value=$PKG_CONFIG
-+ac_cv_env_PKG_CONFIG_set=${PKG_CONFIG+set}
-+ac_cv_env_PKG_CONFIG_value=$PKG_CONFIG
-+ac_env_X_CFLAGS_set=${X_CFLAGS+set}
-+ac_env_X_CFLAGS_value=$X_CFLAGS
-+ac_cv_env_X_CFLAGS_set=${X_CFLAGS+set}
-+ac_cv_env_X_CFLAGS_value=$X_CFLAGS
-+ac_env_X_LIBS_set=${X_LIBS+set}
-+ac_env_X_LIBS_value=$X_LIBS
-+ac_cv_env_X_LIBS_set=${X_LIBS+set}
-+ac_cv_env_X_LIBS_value=$X_LIBS
-
--# Prefer explicitly selected file to automatically selected ones.
--if test -z "$CONFIG_SITE"; then
-- if test "x$prefix" != xNONE; then
-- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-- else
-- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-- fi
--fi
--for ac_site_file in $CONFIG_SITE; do
-- if test -r "$ac_site_file"; then
-- echo "loading site script $ac_site_file"
-- . "$ac_site_file"
-- fi
--done
-+#
-+# Report the --help message.
-+#
-+if test "$ac_init_help" = "long"; then
-+ # Omit some internal or obsolete options to make the list less imposing.
-+ # This message is too long to be a string in the A/UX 3.1 sh.
-+ cat <<_ACEOF
-+\`configure' configures this package to adapt to many kinds of systems.
-
--if test -r "$cache_file"; then
-- echo "loading cache $cache_file"
-- . $cache_file
--else
-- echo "creating cache $cache_file"
-- > $cache_file
--fi
-+Usage: $0 [OPTION]... [VAR=VALUE]...
-
--ac_ext=c
--# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
--ac_cpp='$CPP $CPPFLAGS'
--ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
--ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
--cross_compiling=$ac_cv_prog_cc_cross
--
--ac_exeext=
--ac_objext=o
--if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-- # Stardent Vistra SVR4 grep lacks -e, says ghazi at caip.rutgers.edu.
-- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-- ac_n= ac_c='
--' ac_t=' '
-- else
-- ac_n=-n ac_c= ac_t=
-- fi
--else
-- ac_n= ac_c='\c' ac_t=
--fi
-+To assign environment variables (e.g., CC, CFLAGS...), specify them as
-+VAR=VALUE. See below for descriptions of some of the useful variables.
-
-+Defaults for the options are specified in brackets.
-
-+Configuration:
-+ -h, --help display this help and exit
-+ --help=short display options specific to this package
-+ --help=recursive display the short help of all the included packages
-+ -V, --version display version information and exit
-+ -q, --quiet, --silent do not print \`checking...' messages
-+ --cache-file=FILE cache test results in FILE [disabled]
-+ -C, --config-cache alias for \`--cache-file=config.cache'
-+ -n, --no-create do not create output files
-+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
--# In the following, there are a the following variants
--# of GLib cflags and libs variables
--#
--# GLIB_CFLAGS: cflags for compiling libraries and example progs
--# GLIB_LIBS: libraries for linking example programs
--# GLIB_DEPLIBS: libraries for linking libraries against
--# glib_cflags: cflags to store in gtk-config
--# glib_libs: libs to store in gtk-config
--# glib_thread_cflags: cflags to store in gtk-config for gtk-config gthread
--# glib_thread_libs: libs to store in gtk-config for gtk-config gthread
-+_ACEOF
-
--# Save this value here, since automake will set cflags later
--cflags_set=${CFLAGS+set}
-+ cat <<_ACEOF
-+Installation directories:
-+ --prefix=PREFIX install architecture-independent files in PREFIX
-+ [$ac_default_prefix]
-+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
-+ [PREFIX]
-
-+By default, \`make install' will install all the files in
-+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-+for instance \`--prefix=\$HOME'.
-+
-+For better control, use the options below.
-+
-+Fine tuning of the installation directories:
-+ --bindir=DIR user executables [EPREFIX/bin]
-+ --sbindir=DIR system admin executables [EPREFIX/sbin]
-+ --libexecdir=DIR program executables [EPREFIX/libexec]
-+ --datadir=DIR read-only architecture-independent data [PREFIX/share]
-+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
-+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
-+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
-+ --libdir=DIR object code libraries [EPREFIX/lib]
-+ --includedir=DIR C header files [PREFIX/include]
-+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
-+ --infodir=DIR info documentation [PREFIX/info]
-+ --mandir=DIR man documentation [PREFIX/man]
-+_ACEOF
-+
-+ cat <<\_ACEOF
-+
-+Program names:
-+ --program-prefix=PREFIX prepend PREFIX to installed program names
-+ --program-suffix=SUFFIX append SUFFIX to installed program names
-+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
-+
-+X features:
-+ --x-includes=DIR X include files are in DIR
-+ --x-libraries=DIR X library files are in DIR
-+
-+System types:
-+ --build=BUILD configure for building on BUILD [guessed]
-+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
-+_ACEOF
-+fi
-
-+if test -n "$ac_init_help"; then
-
-+ cat <<\_ACEOF
-
-+Optional Features:
-+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
-+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
-+ --enable-shared[=PKGS]
-+ build shared libraries [default=yes]
-+ --enable-static[=PKGS]
-+ build static libraries [default=yes]
-+ --enable-fast-install[=PKGS]
-+ optimize for fast installation [default=yes]
-+ --disable-libtool-lock avoid locking (might break parallel builds)
-+ --enable-maintainer-mode enable make rules and dependencies not useful
-+ (and sometimes confusing) to the casual installer
-+ --enable-debug=no/minimum/yes turn on debugging default=$debug_default
-+ --enable-shm support shared memory if available default=yes
-+ --enable-ansi turn on strict ansi default=no
-+ --enable-xim support XIM default=yes
-+ --disable-xim-inst does not use xim instantiate callback
-+ --disable-rebuilds disable all source autogeneration rules
-+ --disable-nls do not use Native Language Support
-+ --disable-glibtest Do not try to compile and run a test GLIB program
-
-+Optional Packages:
-+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
-+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
-+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
-+ --with-pic try to use only PIC/non-PIC objects [default=use
-+ both]
-+ --with-tags[=TAGS]
-+ include additional configurations [automatic]
-+ --with-glib=DIR Use uninstalled copy of glib
-+ --with-locale=LOCALE locale name you want to use
-+ --with-xinput=no/gxi/xfree support XInput
-+ --with-native-locale=yes/no Use native locale support default=no
-+ --with-catgets use catgets functions if available
-+ --with-glib-prefix=PFX Prefix where GLIB is installed (optional)
-+ --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)
-+ --with-x use the X Window System
-+
-+Some influential environment variables:
-+ CC C compiler command
-+ CFLAGS C compiler flags
-+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
-+ nonstandard directory <lib dir>
-+ CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
-+ headers in a nonstandard directory <include dir>
-+ CPP C preprocessor
-+ CXX C++ compiler command
-+ CXXFLAGS C++ compiler flags
-+ CXXCPP C++ preprocessor
-+ F77 Fortran 77 compiler command
-+ FFLAGS Fortran 77 compiler flags
-+ PKG_CONFIG path to pkg-config utility
-+ X_CFLAGS C compiler flags for X, overriding pkg-config
-+ X_LIBS linker flags for X, overriding pkg-config
-+
-+Use these variables to override the choices made by `configure' or to help
-+it to find libraries and programs with nonstandard names/locations.
-+
-+_ACEOF
-+fi
-+
-+if test "$ac_init_help" = "recursive"; then
-+ # If there are subdirs, report their specific --help.
-+ ac_popdir=`pwd`
-+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-+ test -d $ac_dir || continue
-+ ac_builddir=.
-+
-+if test "$ac_dir" != .; then
-+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-+ # A "../" for each directory in $ac_dir_suffix.
-+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-+else
-+ ac_dir_suffix= ac_top_builddir=
-+fi
-+
-+case $srcdir in
-+ .) # No --srcdir option. We are building in place.
-+ ac_srcdir=.
-+ if test -z "$ac_top_builddir"; then
-+ ac_top_srcdir=.
-+ else
-+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-+ fi ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute path.
-+ ac_srcdir=$srcdir$ac_dir_suffix;
-+ ac_top_srcdir=$srcdir ;;
-+ *) # Relative path.
-+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
-+esac
-
-+# Do not use `cd foo && pwd` to compute absolute paths, because
-+# the directories may not exist.
-+case `pwd` in
-+.) ac_abs_builddir="$ac_dir";;
-+*)
-+ case "$ac_dir" in
-+ .) ac_abs_builddir=`pwd`;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
-+ esac;;
-+esac
-+case $ac_abs_builddir in
-+.) ac_abs_top_builddir=${ac_top_builddir}.;;
-+*)
-+ case ${ac_top_builddir}. in
-+ .) ac_abs_top_builddir=$ac_abs_builddir;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-+ esac;;
-+esac
-+case $ac_abs_builddir in
-+.) ac_abs_srcdir=$ac_srcdir;;
-+*)
-+ case $ac_srcdir in
-+ .) ac_abs_srcdir=$ac_abs_builddir;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-+ esac;;
-+esac
-+case $ac_abs_builddir in
-+.) ac_abs_top_srcdir=$ac_top_srcdir;;
-+*)
-+ case $ac_top_srcdir in
-+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-+ esac;;
-+esac
-
-+ cd $ac_dir
-+ # Check for guested configure; otherwise get Cygnus style configure.
-+ if test -f $ac_srcdir/configure.gnu; then
-+ echo
-+ $SHELL $ac_srcdir/configure.gnu --help=recursive
-+ elif test -f $ac_srcdir/configure; then
-+ echo
-+ $SHELL $ac_srcdir/configure --help=recursive
-+ elif test -f $ac_srcdir/configure.ac ||
-+ test -f $ac_srcdir/configure.in; then
-+ echo
-+ $ac_configure --help
-+ else
-+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-+ fi
-+ cd "$ac_popdir"
-+ done
-+fi
-
-+test -n "$ac_init_help" && exit 0
-+if $ac_init_version; then
-+ cat <<\_ACEOF
-+
-+Copyright (C) 2003 Free Software Foundation, Inc.
-+This configure script is free software; the Free Software Foundation
-+gives unlimited permission to copy, distribute and modify it.
-+_ACEOF
-+ exit 0
-+fi
-+exec 5>config.log
-+cat >&5 <<_ACEOF
-+This file contains any messages produced by compilers while
-+running configure, to aid debugging if configure makes a mistake.
-
--# libtool versioning
--LT_RELEASE=$GTK_MAJOR_VERSION.$GTK_MINOR_VERSION
--LT_CURRENT=`expr $GTK_MICRO_VERSION - $GTK_INTERFACE_AGE`
--LT_REVISION=$GTK_INTERFACE_AGE
--LT_AGE=`expr $GTK_BINARY_AGE - $GTK_INTERFACE_AGE`
-+It was created by $as_me, which was
-+generated by GNU Autoconf 2.59. Invocation command line was
-
-+ $ $0 $@
-
-+_ACEOF
-+{
-+cat <<_ASUNAME
-+## --------- ##
-+## Platform. ##
-+## --------- ##
-+
-+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-+uname -m = `(uname -m) 2>/dev/null || echo unknown`
-+uname -r = `(uname -r) 2>/dev/null || echo unknown`
-+uname -s = `(uname -s) 2>/dev/null || echo unknown`
-+uname -v = `(uname -v) 2>/dev/null || echo unknown`
-+
-+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-+
-+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-+hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
-+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-
-+_ASUNAME
-
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ echo "PATH: $as_dir"
-+done
-
--# For automake.
--VERSION=$GTK_VERSION
--PACKAGE=gtk+
-+} >&5
-
--# Save this value here, since automake will set cflags later
--cflags_set=${CFLAGS+set}
-+cat >&5 <<_ACEOF
-
--ac_aux_dir=
--for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-- if test -f $ac_dir/install-sh; then
-- ac_aux_dir=$ac_dir
-- ac_install_sh="$ac_aux_dir/install-sh -c"
-- break
-+
-+## ----------- ##
-+## Core tests. ##
-+## ----------- ##
-+
-+_ACEOF
-+
-+
-+# Keep a trace of the command line.
-+# Strip out --no-create and --no-recursion so they do not pile up.
-+# Strip out --silent because we don't want to record it for future runs.
-+# Also quote any args containing shell meta-characters.
-+# Make two passes to allow for proper duplicate-argument suppression.
-+ac_configure_args=
-+ac_configure_args0=
-+ac_configure_args1=
-+ac_sep=
-+ac_must_keep_next=false
-+for ac_pass in 1 2
-+do
-+ for ac_arg
-+ do
-+ case $ac_arg in
-+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+ | -silent | --silent | --silen | --sile | --sil)
-+ continue ;;
-+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ esac
-+ case $ac_pass in
-+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
-+ 2)
-+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
-+ if test $ac_must_keep_next = true; then
-+ ac_must_keep_next=false # Got value, back to normal.
-+ else
-+ case $ac_arg in
-+ *=* | --config-cache | -C | -disable-* | --disable-* \
-+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-+ | -with-* | --with-* | -without-* | --without-* | --x)
-+ case "$ac_configure_args0 " in
-+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-+ esac
-+ ;;
-+ -* ) ac_must_keep_next=true ;;
-+ esac
-+ fi
-+ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-+ # Get rid of the leading space.
-+ ac_sep=" "
-+ ;;
-+ esac
-+ done
-+done
-+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-+
-+# When interrupted or exit'd, cleanup temporary files, and complete
-+# config.log. We remove comments because anyway the quotes in there
-+# would cause problems or look ugly.
-+# WARNING: Be sure not to use single quotes in there, as some shells,
-+# such as our DU 5.0 friend, will then `close' the trap.
-+trap 'exit_status=$?
-+ # Save into config.log some information that might help in debugging.
-+ {
-+ echo
-+
-+ cat <<\_ASBOX
-+## ---------------- ##
-+## Cache variables. ##
-+## ---------------- ##
-+_ASBOX
-+ echo
-+ # The following way of writing the cache mishandles newlines in values,
-+{
-+ (set) 2>&1 |
-+ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-+ *ac_space=\ *)
-+ sed -n \
-+ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-+ ;;
-+ *)
-+ sed -n \
-+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-+ ;;
-+ esac;
-+}
-+ echo
-+
-+ cat <<\_ASBOX
-+## ----------------- ##
-+## Output variables. ##
-+## ----------------- ##
-+_ASBOX
-+ echo
-+ for ac_var in $ac_subst_vars
-+ do
-+ eval ac_val=$`echo $ac_var`
-+ echo "$ac_var='"'"'$ac_val'"'"'"
-+ done | sort
-+ echo
-+
-+ if test -n "$ac_subst_files"; then
-+ cat <<\_ASBOX
-+## ------------- ##
-+## Output files. ##
-+## ------------- ##
-+_ASBOX
-+ echo
-+ for ac_var in $ac_subst_files
-+ do
-+ eval ac_val=$`echo $ac_var`
-+ echo "$ac_var='"'"'$ac_val'"'"'"
-+ done | sort
-+ echo
-+ fi
-+
-+ if test -s confdefs.h; then
-+ cat <<\_ASBOX
-+## ----------- ##
-+## confdefs.h. ##
-+## ----------- ##
-+_ASBOX
-+ echo
-+ sed "/^$/d" confdefs.h | sort
-+ echo
-+ fi
-+ test "$ac_signal" != 0 &&
-+ echo "$as_me: caught signal $ac_signal"
-+ echo "$as_me: exit $exit_status"
-+ } >&5
-+ rm -f core *.core &&
-+ rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
-+ exit $exit_status
-+ ' 0
-+for ac_signal in 1 2 13 15; do
-+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-+done
-+ac_signal=0
-+
-+# confdefs.h avoids OS command line length limits that DEFS can exceed.
-+rm -rf conftest* confdefs.h
-+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-+echo >confdefs.h
-+
-+# Predefined preprocessor variables.
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_NAME "$PACKAGE_NAME"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_VERSION "$PACKAGE_VERSION"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_STRING "$PACKAGE_STRING"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-+_ACEOF
-+
-+
-+# Let the site file select an alternate cache file if it wants to.
-+# Prefer explicitly selected file to automatically selected ones.
-+if test -z "$CONFIG_SITE"; then
-+ if test "x$prefix" != xNONE; then
-+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-+ else
-+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-+ fi
-+fi
-+for ac_site_file in $CONFIG_SITE; do
-+ if test -r "$ac_site_file"; then
-+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-+echo "$as_me: loading site script $ac_site_file" >&6;}
-+ sed 's/^/| /' "$ac_site_file" >&5
-+ . "$ac_site_file"
-+ fi
-+done
-+
-+if test -r "$cache_file"; then
-+ # Some versions of bash will fail to source /dev/null (special
-+ # files actually), so we avoid doing that.
-+ if test -f "$cache_file"; then
-+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-+echo "$as_me: loading cache $cache_file" >&6;}
-+ case $cache_file in
-+ [\\/]* | ?:[\\/]* ) . $cache_file;;
-+ *) . ./$cache_file;;
-+ esac
-+ fi
-+else
-+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-+echo "$as_me: creating cache $cache_file" >&6;}
-+ >$cache_file
-+fi
-+
-+# Check that the precious variables saved in the cache have kept the same
-+# value.
-+ac_cache_corrupted=false
-+for ac_var in `(set) 2>&1 |
-+ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
-+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
-+ eval ac_new_set=\$ac_env_${ac_var}_set
-+ eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-+ eval ac_new_val="\$ac_env_${ac_var}_value"
-+ case $ac_old_set,$ac_new_set in
-+ set,)
-+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-+ ac_cache_corrupted=: ;;
-+ ,set)
-+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-+ ac_cache_corrupted=: ;;
-+ ,);;
-+ *)
-+ if test "x$ac_old_val" != "x$ac_new_val"; then
-+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
-+echo "$as_me: former value: $ac_old_val" >&2;}
-+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
-+echo "$as_me: current value: $ac_new_val" >&2;}
-+ ac_cache_corrupted=:
-+ fi;;
-+ esac
-+ # Pass precious variables to config.status.
-+ if test "$ac_new_set" = set; then
-+ case $ac_new_val in
-+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-+ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ *) ac_arg=$ac_var=$ac_new_val ;;
-+ esac
-+ case " $ac_configure_args " in
-+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
-+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-+ esac
-+ fi
-+done
-+if $ac_cache_corrupted; then
-+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+# In the following, there are a the following variants
-+# of GLib cflags and libs variables
-+#
-+# GLIB_CFLAGS: cflags for compiling libraries and example progs
-+# GLIB_LIBS: libraries for linking example programs
-+# GLIB_DEPLIBS: libraries for linking libraries against
-+# glib_cflags: cflags to store in gtk-config
-+# glib_libs: libs to store in gtk-config
-+# glib_thread_cflags: cflags to store in gtk-config for gtk-config gthread
-+# glib_thread_libs: libs to store in gtk-config for gtk-config gthread
-+
-+# Save this value here, since automake will set cflags later
-+cflags_set=${CFLAGS+set}
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+# libtool versioning
-+LT_RELEASE=$GTK_MAJOR_VERSION.$GTK_MINOR_VERSION
-+LT_CURRENT=`expr $GTK_MICRO_VERSION - $GTK_INTERFACE_AGE`
-+LT_REVISION=$GTK_INTERFACE_AGE
-+LT_AGE=`expr $GTK_BINARY_AGE - $GTK_INTERFACE_AGE`
-+
-+
-+
-+
-+
-+# For automake.
-+VERSION=$GTK_VERSION
-+PACKAGE=gtk+
-+
-+# Save this value here, since automake will set cflags later
-+cflags_set=${CFLAGS+set}
-+
-+am__api_version="1.4"
-+ac_aux_dir=
-+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-+ if test -f $ac_dir/install-sh; then
-+ ac_aux_dir=$ac_dir
-+ ac_install_sh="$ac_aux_dir/install-sh -c"
-+ break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
-+ elif test -f $ac_dir/shtool; then
-+ ac_aux_dir=$ac_dir
-+ ac_install_sh="$ac_aux_dir/shtool install -c"
-+ break
- fi
- done
- if test -z "$ac_aux_dir"; then
-- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
--fi
--ac_config_guess=$ac_aux_dir/config.guess
--ac_config_sub=$ac_aux_dir/config.sub
--ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
-+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
- # Find a good install program. We prefer a C program (faster),
- # so one script is as good as another. But avoid the broken or
-@@ -652,65 +1623,80 @@
- # SunOS /usr/etc/install
- # IRIX /sbin/install
- # AIX /bin/install
-+# AmigaOS /C/install, which installs bootblocks on floppy discs
- # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
- # AFS /usr/afsws/bin/install, which mishandles nonexistent args
- # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-+# OS/2's system install, which has a completely different semantic
- # ./install, which can be erroneously created by make from ./install.sh.
--echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
--echo "configure:661: checking for a BSD compatible install" >&5
-+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
- if test -z "$INSTALL"; then
--if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+if test "${ac_cv_path_install+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
-- for ac_dir in $PATH; do
-- # Account for people who put trailing slashes in PATH elements.
-- case "$ac_dir/" in
-- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-- *)
-- # OSF1 and SCO ODT 3.0 have their own names for install.
-- # Don't use installbsd from OSF since it installs stuff as root
-- # by default.
-- for ac_prog in ginstall scoinst install; do
-- if test -f $ac_dir/$ac_prog; then
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ # Account for people who put trailing slashes in PATH elements.
-+case $as_dir/ in
-+ ./ | .// | /cC/* | \
-+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-+ /usr/ucb/* ) ;;
-+ *)
-+ # OSF1 and SCO ODT 3.0 have their own names for install.
-+ # Don't use installbsd from OSF since it installs stuff as root
-+ # by default.
-+ for ac_prog in ginstall scoinst install; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
- if test $ac_prog = install &&
-- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
-+ elif test $ac_prog = install &&
-+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+ # program-specific install script used by HP pwplus--don't use.
-+ :
- else
-- ac_cv_path_install="$ac_dir/$ac_prog -c"
-- break 2
-+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-+ break 3
- fi
- fi
- done
-- ;;
-- esac
-- done
-- IFS="$ac_save_IFS"
-+ done
-+ ;;
-+esac
-+done
-+
-
- fi
- if test "${ac_cv_path_install+set}" = set; then
-- INSTALL="$ac_cv_path_install"
-+ INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
-- INSTALL="$ac_install_sh"
-+ INSTALL=$ac_install_sh
- fi
- fi
--echo "$ac_t""$INSTALL" 1>&6
-+echo "$as_me:$LINENO: result: $INSTALL" >&5
-+echo "${ECHO_T}$INSTALL" >&6
-
- # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
- # It thinks the first close brace ends the variable substitution.
- test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
--test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
- test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
--echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
--echo "configure:714: checking whether build environment is sane" >&5
-+echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
- # Just in case
- sleep 1
- echo timestamp > conftestfile
-@@ -732,8 +1718,11 @@
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
-- { echo "configure: error: ls -t appears to fail. Make sure there is not a broken
--alias in your environment" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
-+alias in your environment" >&5
-+echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
-+alias in your environment" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
- test "$2" = conftestfile
-@@ -742,54 +1731,54 @@
- # Ok.
- :
- else
-- { echo "configure: error: newly created file is older than distributed files!
--Check your system clock" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
-+Check your system clock" >&5
-+echo "$as_me: error: newly created file is older than distributed files!
-+Check your system clock" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
- rm -f conftest*
--echo "$ac_t""yes" 1>&6
--if test "$program_transform_name" = s,x,x,; then
-- program_transform_name=
--else
-- # Double any \ or $. echo might interpret backslashes.
-- cat <<\EOF_SED > conftestsed
--s,\\,\\\\,g; s,\$,$$,g
--EOF_SED
-- program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-- rm -f conftestsed
--fi
-+echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
- test "$program_prefix" != NONE &&
-- program_transform_name="s,^,${program_prefix},; $program_transform_name"
-+ program_transform_name="s,^,$program_prefix,;$program_transform_name"
- # Use a double $ so make ignores it.
- test "$program_suffix" != NONE &&
-- program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
--
--# sed with no file args requires a program.
--test "$program_transform_name" = "" && program_transform_name="s,x,x,"
--
--echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
--echo "configure:771: checking whether ${MAKE-make} sets \${MAKE}" >&5
--set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ program_transform_name="s,\$,$program_suffix,;$program_transform_name"
-+# Double any \ or $. echo might interpret backslashes.
-+# By default was `s,x,x', remove it if useless.
-+cat <<\_ACEOF >conftest.sed
-+s/[\\$]/&&/g;s/;s,x,x,$//
-+_ACEOF
-+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-+rm conftest.sed
-+
-+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
-+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
-+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftestmake <<\EOF
-+ cat >conftest.make <<\_ACEOF
- all:
-- @echo 'ac_maketemp="${MAKE}"'
--EOF
-+ @echo 'ac_maketemp="$(MAKE)"'
-+_ACEOF
- # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
--eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
- if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
- else
- eval ac_cv_prog_make_${ac_make}_set=no
- fi
--rm -f conftestmake
-+rm -f conftest.make
- fi
- if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
- SET_MAKE=
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- SET_MAKE="MAKE=${MAKE-make}"
- fi
-
-@@ -799,436 +1788,875 @@
- VERSION=$VERSION
-
- if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-- { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
-
-
- missing_dir=`cd $ac_aux_dir && pwd`
--echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
--echo "configure:810: checking for working aclocal" >&5
-+echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5
-+echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6
- # Run test in a subshell; some versions of sh will print an error if
- # an executable is not found, even if stderr is redirected.
- # Redirect stdin to placate older versions of autoconf. Sigh.
--if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-- ACLOCAL=aclocal
-- echo "$ac_t""found" 1>&6
--else
-- ACLOCAL="$missing_dir/missing aclocal"
-- echo "$ac_t""missing" 1>&6
-+if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
-+ ACLOCAL=aclocal-${am__api_version}
-+ echo "$as_me:$LINENO: result: found" >&5
-+echo "${ECHO_T}found" >&6
-+else
-+ ACLOCAL="$missing_dir/missing aclocal-${am__api_version}"
-+ echo "$as_me:$LINENO: result: missing" >&5
-+echo "${ECHO_T}missing" >&6
- fi
-
--echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
--echo "configure:823: checking for working autoconf" >&5
-+echo "$as_me:$LINENO: checking for working autoconf" >&5
-+echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6
- # Run test in a subshell; some versions of sh will print an error if
- # an executable is not found, even if stderr is redirected.
- # Redirect stdin to placate older versions of autoconf. Sigh.
- if (autoconf --version) < /dev/null > /dev/null 2>&1; then
- AUTOCONF=autoconf
-- echo "$ac_t""found" 1>&6
-+ echo "$as_me:$LINENO: result: found" >&5
-+echo "${ECHO_T}found" >&6
- else
- AUTOCONF="$missing_dir/missing autoconf"
-- echo "$ac_t""missing" 1>&6
-+ echo "$as_me:$LINENO: result: missing" >&5
-+echo "${ECHO_T}missing" >&6
- fi
-
--echo $ac_n "checking for working automake""... $ac_c" 1>&6
--echo "configure:836: checking for working automake" >&5
-+echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5
-+echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6
- # Run test in a subshell; some versions of sh will print an error if
- # an executable is not found, even if stderr is redirected.
- # Redirect stdin to placate older versions of autoconf. Sigh.
--if (automake --version) < /dev/null > /dev/null 2>&1; then
-- AUTOMAKE=automake
-- echo "$ac_t""found" 1>&6
--else
-- AUTOMAKE="$missing_dir/missing automake"
-- echo "$ac_t""missing" 1>&6
-+if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
-+ AUTOMAKE=automake-${am__api_version}
-+ echo "$as_me:$LINENO: result: found" >&5
-+echo "${ECHO_T}found" >&6
-+else
-+ AUTOMAKE="$missing_dir/missing automake-${am__api_version}"
-+ echo "$as_me:$LINENO: result: missing" >&5
-+echo "${ECHO_T}missing" >&6
- fi
-
--echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
--echo "configure:849: checking for working autoheader" >&5
-+echo "$as_me:$LINENO: checking for working autoheader" >&5
-+echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6
- # Run test in a subshell; some versions of sh will print an error if
- # an executable is not found, even if stderr is redirected.
- # Redirect stdin to placate older versions of autoconf. Sigh.
- if (autoheader --version) < /dev/null > /dev/null 2>&1; then
- AUTOHEADER=autoheader
-- echo "$ac_t""found" 1>&6
-+ echo "$as_me:$LINENO: result: found" >&5
-+echo "${ECHO_T}found" >&6
- else
- AUTOHEADER="$missing_dir/missing autoheader"
-- echo "$ac_t""missing" 1>&6
-+ echo "$as_me:$LINENO: result: missing" >&5
-+echo "${ECHO_T}missing" >&6
- fi
-
--echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
--echo "configure:862: checking for working makeinfo" >&5
-+echo "$as_me:$LINENO: checking for working makeinfo" >&5
-+echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6
- # Run test in a subshell; some versions of sh will print an error if
- # an executable is not found, even if stderr is redirected.
- # Redirect stdin to placate older versions of autoconf. Sigh.
- if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
- MAKEINFO=makeinfo
-- echo "$ac_t""found" 1>&6
-+ echo "$as_me:$LINENO: result: found" >&5
-+echo "${ECHO_T}found" >&6
- else
- MAKEINFO="$missing_dir/missing makeinfo"
-- echo "$ac_t""missing" 1>&6
-+ echo "$as_me:$LINENO: result: missing" >&5
-+echo "${ECHO_T}missing" >&6
- fi
-
-
-
- # Specify a configuration file
-
-+ ac_config_headers="$ac_config_headers config.h"
-
-+ ac_config_commands="$ac_config_commands default-1"
-
-
- # Check whether --enable-shared or --disable-shared was given.
- if test "${enable_shared+set}" = set; then
- enableval="$enable_shared"
- p=${PACKAGE-default}
--case "$enableval" in
--yes) enable_shared=yes ;;
--no) enable_shared=no ;;
--*)
-- enable_shared=no
-- # Look at the argument we got. We use all the common list separators.
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-- for pkg in $enableval; do
-- if test "X$pkg" = "X$p"; then
-- enable_shared=yes
-- fi
-- done
-- IFS="$ac_save_ifs"
-- ;;
--esac
-+ case $enableval in
-+ yes) enable_shared=yes ;;
-+ no) enable_shared=no ;;
-+ *)
-+ enable_shared=no
-+ # Look at the argument we got. We use all the common list separators.
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for pkg in $enableval; do
-+ IFS="$lt_save_ifs"
-+ if test "X$pkg" = "X$p"; then
-+ enable_shared=yes
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ ;;
-+ esac
- else
- enable_shared=yes
--fi
-+fi;
-
- # Check whether --enable-static or --disable-static was given.
- if test "${enable_static+set}" = set; then
- enableval="$enable_static"
- p=${PACKAGE-default}
--case "$enableval" in
--yes) enable_static=yes ;;
--no) enable_static=no ;;
--*)
-- enable_static=no
-- # Look at the argument we got. We use all the common list separators.
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-- for pkg in $enableval; do
-- if test "X$pkg" = "X$p"; then
-- enable_static=yes
-- fi
-- done
-- IFS="$ac_save_ifs"
-- ;;
--esac
-+ case $enableval in
-+ yes) enable_static=yes ;;
-+ no) enable_static=no ;;
-+ *)
-+ enable_static=no
-+ # Look at the argument we got. We use all the common list separators.
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for pkg in $enableval; do
-+ IFS="$lt_save_ifs"
-+ if test "X$pkg" = "X$p"; then
-+ enable_static=yes
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ ;;
-+ esac
- else
- enable_static=yes
--fi
-+fi;
-
- # Check whether --enable-fast-install or --disable-fast-install was given.
- if test "${enable_fast_install+set}" = set; then
- enableval="$enable_fast_install"
- p=${PACKAGE-default}
--case "$enableval" in
--yes) enable_fast_install=yes ;;
--no) enable_fast_install=no ;;
--*)
-- enable_fast_install=no
-- # Look at the argument we got. We use all the common list separators.
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-- for pkg in $enableval; do
-- if test "X$pkg" = "X$p"; then
-- enable_fast_install=yes
-- fi
-- done
-- IFS="$ac_save_ifs"
-- ;;
--esac
-+ case $enableval in
-+ yes) enable_fast_install=yes ;;
-+ no) enable_fast_install=no ;;
-+ *)
-+ enable_fast_install=no
-+ # Look at the argument we got. We use all the common list separators.
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for pkg in $enableval; do
-+ IFS="$lt_save_ifs"
-+ if test "X$pkg" = "X$p"; then
-+ enable_fast_install=yes
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ ;;
-+ esac
- else
- enable_fast_install=yes
--fi
--
-+fi;
-
- # Make sure we can run config.sub.
--if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
--else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
--fi
-+$ac_config_sub sun4 >/dev/null 2>&1 ||
-+ { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
-+echo "$as_me: error: cannot run $ac_config_sub" >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+echo "$as_me:$LINENO: checking build system type" >&5
-+echo $ECHO_N "checking build system type... $ECHO_C" >&6
-+if test "${ac_cv_build+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_build_alias=$build_alias
-+test -z "$ac_cv_build_alias" &&
-+ ac_cv_build_alias=`$ac_config_guess`
-+test -z "$ac_cv_build_alias" &&
-+ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
-+ { (exit 1); exit 1; }; }
-+ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
-+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
-+echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-+echo "${ECHO_T}$ac_cv_build" >&6
-+build=$ac_cv_build
-+build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-+build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-+build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-+
-+
-+echo "$as_me:$LINENO: checking host system type" >&5
-+echo $ECHO_N "checking host system type... $ECHO_C" >&6
-+if test "${ac_cv_host+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_host_alias=$host_alias
-+test -z "$ac_cv_host_alias" &&
-+ ac_cv_host_alias=$ac_cv_build_alias
-+ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
-+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
-+echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-+echo "${ECHO_T}$ac_cv_host" >&6
-+host=$ac_cv_host
-+host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-+host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-+host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
--echo $ac_n "checking host system type""... $ac_c" 1>&6
--echo "configure:957: checking host system type" >&5
-
--host_alias=$host
--case "$host_alias" in
--NONE)
-- case $nonopt in
-- NONE)
-- if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-- fi ;;
-- *) host_alias=$nonopt ;;
-- esac ;;
--esac
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}gcc; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$CC"; then
-+ ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-
--host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
--host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
--host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
--host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
--echo "$ac_t""$host" 1>&6
--
--echo $ac_n "checking build system type""... $ac_c" 1>&6
--echo "configure:978: checking build system type" >&5
--
--build_alias=$build
--case "$build_alias" in
--NONE)
-- case $nonopt in
-- NONE) build_alias=$host_alias ;;
-- *) build_alias=$nonopt ;;
-- esac ;;
--esac
--
--build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
--build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
--build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
--build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
--echo "$ac_t""$build" 1>&6
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+ echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-
--# Extract the first word of "ranlib", so it can be a program name with args.
--set dummy ranlib; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:998: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+fi
-+if test -z "$ac_cv_prog_CC"; then
-+ ac_ct_CC=$CC
-+ # Extract the first word of "gcc", so it can be a program name with args.
-+set dummy gcc; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- if test -n "$RANLIB"; then
-- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-+ if test -n "$ac_ct_CC"; then
-+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_RANLIB="ranlib"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_CC="gcc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- fi
- fi
--RANLIB="$ac_cv_prog_RANLIB"
--if test -n "$RANLIB"; then
-- echo "$ac_t""$RANLIB" 1>&6
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
--# Extract the first word of "gcc", so it can be a program name with args.
--set dummy gcc; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:1028: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ CC=$ac_ct_CC
-+else
-+ CC="$ac_cv_prog_CC"
-+fi
-+
-+if test -z "$CC"; then
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}cc; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_CC="gcc"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_CC="${ac_tool_prefix}cc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- fi
- fi
--CC="$ac_cv_prog_CC"
-+CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$ac_t""$CC" 1>&6
-+ echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
--if test -z "$CC"; then
-+fi
-+if test -z "$ac_cv_prog_CC"; then
-+ ac_ct_CC=$CC
- # Extract the first word of "cc", so it can be a program name with args.
- set dummy cc; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:1058: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- if test -n "$CC"; then
-- ac_cv_prog_CC="$CC" # Let the user override the test.
-+ if test -n "$ac_ct_CC"; then
-+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_prog_rejected=no
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-- ac_prog_rejected=yes
-- continue
-- fi
-- ac_cv_prog_CC="cc"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
--if test $ac_prog_rejected = yes; then
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_CC="cc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+ CC=$ac_ct_CC
-+else
-+ CC="$ac_cv_prog_CC"
-+fi
-+
-+fi
-+if test -z "$CC"; then
-+ # Extract the first word of "cc", so it can be a program name with args.
-+set dummy cc; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$CC"; then
-+ ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+ ac_prog_rejected=no
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-+ ac_prog_rejected=yes
-+ continue
-+ fi
-+ ac_cv_prog_CC="cc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
-- if test $# -gt 0; then
-+ if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
-- set dummy "$ac_dir/$ac_word" "$@"
-- shift
-- ac_cv_prog_CC="$@"
-+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
- fi
- fi
- fi
--CC="$ac_cv_prog_CC"
-+CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$ac_t""$CC" 1>&6
-+ echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
-- if test -z "$CC"; then
-- case "`uname -s`" in
-- *win32* | *WIN32*)
-- # Extract the first word of "cl", so it can be a program name with args.
--set dummy cl; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:1109: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+fi
-+if test -z "$CC"; then
-+ if test -n "$ac_tool_prefix"; then
-+ for ac_prog in cl
-+ do
-+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_CC="cl"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- fi
- fi
--CC="$ac_cv_prog_CC"
-+CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$ac_t""$CC" 1>&6
-+ echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-- ;;
-- esac
-+
-+ test -n "$CC" && break
-+ done
-+fi
-+if test -z "$CC"; then
-+ ac_ct_CC=$CC
-+ for ac_prog in cl
-+do
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_CC"; then
-+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_CC="$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
- fi
-- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-+done
-+done
-+
- fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+ test -n "$ac_ct_CC" && break
-+done
-
--echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
--echo "configure:1141: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-+ CC=$ac_ct_CC
-+fi
-
--ac_ext=c
--# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
--ac_cpp='$CPP $CPPFLAGS'
--ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
--ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
--cross_compiling=$ac_cv_prog_cc_cross
-+fi
-
--cat > conftest.$ac_ext << EOF
-
--#line 1152 "configure"
--#include "confdefs.h"
-+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+# Provide some information about the compiler.
-+echo "$as_me:$LINENO:" \
-+ "checking for C compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-+ (eval $ac_compiler --version </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-+ (eval $ac_compiler -v </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-+ (eval $ac_compiler -V </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--main(){return(0);}
--EOF
--if { (eval echo configure:1157: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- ac_cv_prog_cc_works=yes
-- # If we can't run a trivial program, we are probably using a cross compiler.
-- if (./conftest; exit) 2>/dev/null; then
-- ac_cv_prog_cc_cross=no
-- else
-- ac_cv_prog_cc_cross=yes
-- fi
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+ac_clean_files_save=$ac_clean_files
-+ac_clean_files="$ac_clean_files a.out a.exe b.out"
-+# Try to create an executable without -o first, disregard a.out.
-+# It will help us diagnose broken compilers, and finding out an intuition
-+# of exeext.
-+echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
-+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
-+ (eval $ac_link_default) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ # Find the output, starting from the most likely. This scheme is
-+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-+# resort.
-+
-+# Be careful to initialize this variable, since it used to be cached.
-+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-+ac_cv_exeext=
-+# b.out is created by i960 compilers.
-+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
-+do
-+ test -f "$ac_file" || continue
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-+ ;;
-+ conftest.$ac_ext )
-+ # This is the source file.
-+ ;;
-+ [ab].out )
-+ # We found the default executable, but exeext='' is most
-+ # certainly right.
-+ break;;
-+ *.* )
-+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-+ # FIXME: I believe we export ac_cv_exeext for Libtool,
-+ # but it would be cool to find out if it's true. Does anybody
-+ # maintain Libtool? --akim.
-+ export ac_cv_exeext
-+ break;;
-+ * )
-+ break;;
-+ esac
-+done
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- ac_cv_prog_cc_works=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C compiler cannot create executables
-+See \`config.log' for more details." >&2;}
-+ { (exit 77); exit 77; }; }
-+fi
-+
-+ac_exeext=$ac_cv_exeext
-+echo "$as_me:$LINENO: result: $ac_file" >&5
-+echo "${ECHO_T}$ac_file" >&6
-+
-+# Check the compiler produces executables we can run. If not, either
-+# the compiler is broken, or we cross compile.
-+echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
-+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-+# If not cross compiling, check that we can run a simple program.
-+if test "$cross_compiling" != yes; then
-+ if { ac_try='./$ac_file'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ cross_compiling=no
-+ else
-+ if test "$cross_compiling" = maybe; then
-+ cross_compiling=yes
-+ else
-+ { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-+If you meant to cross compile, use \`--host'.
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot run C compiled programs.
-+If you meant to cross compile, use \`--host'.
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi
-+ fi
- fi
--rm -fr conftest*
--ac_ext=c
--# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
--ac_cpp='$CPP $CPPFLAGS'
--ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
--ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
--cross_compiling=$ac_cv_prog_cc_cross
--
--echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
--if test $ac_cv_prog_cc_works = no; then
-- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
--fi
--echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
--echo "configure:1183: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
--echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
--cross_compiling=$ac_cv_prog_cc_cross
--
--echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
--echo "configure:1188: checking whether we are using GNU C" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.c <<EOF
--#ifdef __GNUC__
-- yes;
--#endif
--EOF
--if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1197: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-- ac_cv_prog_gcc=yes
-+echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
-+
-+rm -f a.out a.exe conftest$ac_cv_exeext b.out
-+ac_clean_files=$ac_clean_files_save
-+# Check the compiler produces executables we can run. If not, either
-+# the compiler is broken, or we cross compile.
-+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-+echo "$as_me:$LINENO: result: $cross_compiling" >&5
-+echo "${ECHO_T}$cross_compiling" >&6
-+
-+echo "$as_me:$LINENO: checking for suffix of executables" >&5
-+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
-+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-+# work properly (i.e., refer to `conftest.exe'), while it won't with
-+# `rm'.
-+for ac_file in conftest.exe conftest conftest.*; do
-+ test -f "$ac_file" || continue
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
-+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-+ export ac_cv_exeext
-+ break;;
-+ * ) break;;
-+ esac
-+done
- else
-- ac_cv_prog_gcc=no
--fi
--fi
-+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+rm -f conftest$ac_cv_exeext
-+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-+echo "${ECHO_T}$ac_cv_exeext" >&6
-+
-+rm -f conftest.$ac_ext
-+EXEEXT=$ac_cv_exeext
-+ac_exeext=$EXEEXT
-+echo "$as_me:$LINENO: checking for suffix of object files" >&5
-+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
-+if test "${ac_cv_objext+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-+int
-+main ()
-+{
-
--if test $ac_cv_prog_gcc = yes; then
-- GCC=yes
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.o conftest.obj
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
-+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-+ break;;
-+ esac
-+done
- else
-- GCC=
--fi
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
--ac_test_CFLAGS="${CFLAGS+set}"
--ac_save_CFLAGS="$CFLAGS"
--CFLAGS=
--echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
--echo "configure:1216: checking whether ${CC-cc} accepts -g" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- echo 'void f(){}' > conftest.c
--if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot compute suffix of object files: cannot compile
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+rm -f conftest.$ac_cv_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-+echo "${ECHO_T}$ac_cv_objext" >&6
-+OBJEXT=$ac_cv_objext
-+ac_objext=$OBJEXT
-+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
-+if test "${ac_cv_c_compiler_gnu+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+#ifndef __GNUC__
-+ choke me
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_compiler_gnu=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_compiler_gnu=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_cv_c_compiler_gnu=$ac_compiler_gnu
-+
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-+GCC=`test $ac_compiler_gnu = yes && echo yes`
-+ac_test_CFLAGS=${CFLAGS+set}
-+ac_save_CFLAGS=$CFLAGS
-+CFLAGS="-g"
-+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
-+if test "${ac_cv_prog_cc_g+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_cv_prog_cc_g=yes
- else
-- ac_cv_prog_cc_g=no
--fi
--rm -f conftest*
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-+ac_cv_prog_cc_g=no
- fi
--
--echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
- if test "$ac_test_CFLAGS" = set; then
-- CFLAGS="$ac_save_CFLAGS"
-+ CFLAGS=$ac_save_CFLAGS
- elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
-@@ -1242,6 +2670,338 @@
- CFLAGS=
- fi
- fi
-+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-+if test "${ac_cv_prog_cc_stdc+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_prog_cc_stdc=no
-+ac_save_CC=$CC
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdarg.h>
-+#include <stdio.h>
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-+struct buf { int x; };
-+FILE * (*rcsopen) (struct buf *, struct stat *, int);
-+static char *e (p, i)
-+ char **p;
-+ int i;
-+{
-+ return p[i];
-+}
-+static char *f (char * (*g) (char **, int), char **p, ...)
-+{
-+ char *s;
-+ va_list v;
-+ va_start (v,p);
-+ s = g (p, va_arg (v,int));
-+ va_end (v);
-+ return s;
-+}
-+
-+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
-+ function prototypes and stuff, but not '\xHH' hex character constants.
-+ These don't provoke an error unfortunately, instead are silently treated
-+ as 'x'. The following induces an error, until -std1 is added to get
-+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
-+ array size at least. It's necessary to write '\x00'==0 to get something
-+ that's true only with -std1. */
-+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-+
-+int test (int i, double x);
-+struct s1 {int (*f) (int a);};
-+struct s2 {int (*f) (double a);};
-+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-+int argc;
-+char **argv;
-+int
-+main ()
-+{
-+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+# Don't try gcc -ansi; that turns off useful extensions and
-+# breaks some systems' header files.
-+# AIX -qlanglvl=ansi
-+# Ultrix and OSF/1 -std1
-+# HP-UX 10.20 and later -Ae
-+# HP-UX older versions -Aa -D_HPUX_SOURCE
-+# SVR4 -Xc -D__EXTENSIONS__
-+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-+do
-+ CC="$ac_save_CC $ac_arg"
-+ rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_prog_cc_stdc=$ac_arg
-+break
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.err conftest.$ac_objext
-+done
-+rm -f conftest.$ac_ext conftest.$ac_objext
-+CC=$ac_save_CC
-+
-+fi
-+
-+case "x$ac_cv_prog_cc_stdc" in
-+ x|xno)
-+ echo "$as_me:$LINENO: result: none needed" >&5
-+echo "${ECHO_T}none needed" >&6 ;;
-+ *)
-+ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-+ CC="$CC $ac_cv_prog_cc_stdc" ;;
-+esac
-+
-+# Some people use a C++ compiler to compile C. Since we use `exit',
-+# in C++ we need to declare it. In case someone uses the same compiler
-+# for both compiling C and C++ we need to have the C++ compiler decide
-+# the declaration of exit, since it's the most demanding environment.
-+cat >conftest.$ac_ext <<_ACEOF
-+#ifndef __cplusplus
-+ choke me
-+#endif
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ for ac_declaration in \
-+ '' \
-+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
-+ 'extern "C" void std::exit (int); using std::exit;' \
-+ 'extern "C" void exit (int) throw ();' \
-+ 'extern "C" void exit (int);' \
-+ 'void exit (int);'
-+do
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_declaration
-+#include <stdlib.h>
-+int
-+main ()
-+{
-+exit (42);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+continue
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_declaration
-+int
-+main ()
-+{
-+exit (42);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ break
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+done
-+rm -f conftest*
-+if test -n "$ac_declaration"; then
-+ echo '#ifdef __cplusplus' >>confdefs.h
-+ echo $ac_declaration >>confdefs.h
-+ echo '#endif' >>confdefs.h
-+fi
-+
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
-+echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6
-+if test "${lt_cv_path_SED+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # Loop through the user's path and test for sed and gsed.
-+# Then use that list of sed's as ones to test for truncation.
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for lt_ac_prog in sed gsed; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-+ fi
-+ done
-+ done
-+done
-+lt_ac_max=0
-+lt_ac_count=0
-+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-+# along with /bin/sed that truncates output.
-+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-+ test ! -f $lt_ac_sed && continue
-+ cat /dev/null > conftest.in
-+ lt_ac_count=0
-+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-+ # Check for GNU sed and select it if it is found.
-+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-+ lt_cv_path_SED=$lt_ac_sed
-+ break
-+ fi
-+ while true; do
-+ cat conftest.in conftest.in >conftest.tmp
-+ mv conftest.tmp conftest.in
-+ cp conftest.in conftest.nl
-+ echo >>conftest.nl
-+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-+ cmp -s conftest.out conftest.nl || break
-+ # 10000 chars as input seems more than enough
-+ test $lt_ac_count -gt 10 && break
-+ lt_ac_count=`expr $lt_ac_count + 1`
-+ if test $lt_ac_count -gt $lt_ac_max; then
-+ lt_ac_max=$lt_ac_count
-+ lt_cv_path_SED=$lt_ac_sed
-+ fi
-+ done
-+done
-+
-+fi
-+
-+SED=$lt_cv_path_SED
-+echo "$as_me:$LINENO: result: $SED" >&5
-+echo "${ECHO_T}$SED" >&6
-+
-+echo "$as_me:$LINENO: checking for egrep" >&5
-+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-+if test "${ac_cv_prog_egrep+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-+ then ac_cv_prog_egrep='grep -E'
-+ else ac_cv_prog_egrep='egrep'
-+ fi
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
-+ EGREP=$ac_cv_prog_egrep
-+
-+
-
- # Check whether --with-gnu-ld or --without-gnu-ld was given.
- if test "${with_gnu_ld+set}" = set; then
-@@ -1249,22 +3009,27 @@
- test "$withval" = no || with_gnu_ld=yes
- else
- with_gnu_ld=no
--fi
--
-+fi;
- ac_prog=ld
--if test "$ac_cv_prog_gcc" = yes; then
-+if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
-- echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
--echo "configure:1259: checking for ld used by GCC" >&5
-- ac_prog=`($CC -print-prog-name=ld) 2>&5`
-- case "$ac_prog" in
-+ echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6
-+ case $host in
-+ *-*-mingw*)
-+ # gcc leaves a trailing carriage return which upsets mingw
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-+ *)
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-+ esac
-+ case $ac_prog in
- # Accept absolute paths.
-- [\\/]* | [A-Za-z]:[\\/]*)
-+ [\\/]* | ?:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
-- # Canonicalize the path of ld
-- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-+ # Canonicalize the pathname of ld
-+ ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-+ ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
-@@ -1278,294 +3043,15189 @@
- ;;
- esac
- elif test "$with_gnu_ld" = yes; then
-- echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
--echo "configure:1283: checking for GNU ld" >&5
-+ echo "$as_me:$LINENO: checking for GNU ld" >&5
-+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
- else
-- echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
--echo "configure:1286: checking for non-GNU ld" >&5
-+ echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
- fi
--if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+if test "${lt_cv_path_LD+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -z "$LD"; then
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
-+ IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-- ac_cv_path_LD="$ac_dir/$ac_prog"
-+ lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
-- # but apparently some GNU ld's only accept -v.
-+ # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
-- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-+ *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
-- else
-+ ;;
-+ *)
- test "$with_gnu_ld" != yes && break
-- fi
-+ ;;
-+ esac
- fi
- done
-- IFS="$ac_save_ifs"
-+ IFS="$lt_save_ifs"
- else
-- ac_cv_path_LD="$LD" # Let the user override the test with a path.
-+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
- fi
- fi
-
--LD="$ac_cv_path_LD"
-+LD="$lt_cv_path_LD"
- if test -n "$LD"; then
-- echo "$ac_t""$LD" 1>&6
--else
-- echo "$ac_t""no" 1>&6
--fi
--test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
--echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
--echo "configure:1321: checking if the linker ($LD) is GNU ld" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ echo "$as_me:$LINENO: result: $LD" >&5
-+echo "${ECHO_T}$LD" >&6
- else
-- # I'd rather use --version here, but apparently some GNU ld's only accept -v.
--if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-- ac_cv_prog_gnu_ld=yes
--else
-- ac_cv_prog_gnu_ld=no
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-+ { (exit 1); exit 1; }; }
-+echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
-+if test "${lt_cv_prog_gnu_ld+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
-+case `$LD -v 2>&1 </dev/null` in
-+*GNU* | *'with BFD'*)
-+ lt_cv_prog_gnu_ld=yes
-+ ;;
-+*)
-+ lt_cv_prog_gnu_ld=no
-+ ;;
-+esac
- fi
-+echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
-+with_gnu_ld=$lt_cv_prog_gnu_ld
-+
-+
-+echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
-+if test "${lt_cv_ld_reload_flag+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_ld_reload_flag='-r'
-+fi
-+echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
-+reload_flag=$lt_cv_ld_reload_flag
-+case $reload_flag in
-+"" | " "*) ;;
-+*) reload_flag=" $reload_flag" ;;
-+esac
-+reload_cmds='$LD$reload_flag -o $output$reload_objs'
-+case $host_os in
-+ darwin*)
-+ if test "$GCC" = yes; then
-+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-+ else
-+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
-+ fi
-+ ;;
-+esac
-
--echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
--
--
--echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
--echo "configure:1337: checking for BSD-compatible nm" >&5
--if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-+echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
-+if test "${lt_cv_path_NM+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$NM"; then
- # Let the user override the test.
-- ac_cv_path_NM="$NM"
-+ lt_cv_path_NM="$NM"
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
-- # Check to see if the nm accepts a BSD-compat flag.
-- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-- # nm: unknown option "B" ignored
-- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-- ac_cv_path_NM="$ac_dir/nm -B"
-- break
-- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-- ac_cv_path_NM="$ac_dir/nm -p"
-- break
-- else
-- ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
-- continue # so that we can try to find one that supports BSD flags
-+ lt_nm_to_check="${ac_tool_prefix}nm"
-+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-+ lt_nm_to_check="$lt_nm_to_check nm"
-+ fi
-+ for lt_tmp_nm in $lt_nm_to_check; do
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ tmp_nm="$ac_dir/$lt_tmp_nm"
-+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-+ # Check to see if the nm accepts a BSD-compat flag.
-+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-+ # nm: unknown option "B" ignored
-+ # Tru64's nm complains that /dev/null is an invalid object file
-+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-+ */dev/null* | *'Invalid file or object type'*)
-+ lt_cv_path_NM="$tmp_nm -B"
-+ break
-+ ;;
-+ *)
-+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-+ */dev/null*)
-+ lt_cv_path_NM="$tmp_nm -p"
-+ break
-+ ;;
-+ *)
-+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-+ continue # so that we can try to find one that supports BSD flags
-+ ;;
-+ esac
-+ ;;
-+ esac
- fi
-- fi
-+ done
-+ IFS="$lt_save_ifs"
- done
-- IFS="$ac_save_ifs"
-- test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
-+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
- fi
- fi
-+echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
-+echo "${ECHO_T}$lt_cv_path_NM" >&6
-+NM="$lt_cv_path_NM"
-+
-+echo "$as_me:$LINENO: checking whether ln -s works" >&5
-+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
-+LN_S=$as_ln_s
-+if test "$LN_S" = "ln -s"; then
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
-+else
-+ echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-+echo "${ECHO_T}no, using $LN_S" >&6
-+fi
-+
-+echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5
-+echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6
-+if test "${lt_cv_deplibs_check_method+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_file_magic_cmd='$MAGIC_CMD'
-+lt_cv_file_magic_test_file=
-+lt_cv_deplibs_check_method='unknown'
-+# Need to set the preceding variable on all platforms that support
-+# interlibrary dependencies.
-+# 'none' -- dependencies not supported.
-+# `unknown' -- same as none, but documents that we really don't know.
-+# 'pass_all' -- all dependencies passed with no checks.
-+# 'test_compile' -- check by making test program.
-+# 'file_magic [[regex]]' -- check by looking for files in library path
-+# which responds to the $file_magic_cmd with a given extended regex.
-+# If you have `file' or equivalent on your system and you're not sure
-+# whether `pass_all' will *always* work, you probably want this one.
-+
-+case $host_os in
-+aix4* | aix5*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-
--NM="$ac_cv_path_NM"
--echo "$ac_t""$NM" 1>&6
-+beos*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-
--echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
--echo "configure:1373: checking whether ln -s works" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- rm -f conftestdata
--if ln -s X conftestdata 2>/dev/null
--then
-- rm -f conftestdata
-- ac_cv_prog_LN_S="ln -s"
--else
-- ac_cv_prog_LN_S=ln
--fi
--fi
--LN_S="$ac_cv_prog_LN_S"
--if test "$ac_cv_prog_LN_S" = "ln -s"; then
-- echo "$ac_t""yes" 1>&6
--else
-- echo "$ac_t""no" 1>&6
--fi
-+bsdi[45]*)
-+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-+ lt_cv_file_magic_cmd='/usr/bin/file -L'
-+ lt_cv_file_magic_test_file=/shlib/libc.so
-+ ;;
-
-+cygwin*)
-+ # func_win32_libid is a shell function defined in ltmain.sh
-+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-+ lt_cv_file_magic_cmd='func_win32_libid'
-+ ;;
-
--case "$target" in
--NONE) lt_target="$host" ;;
--*) lt_target="$target" ;;
--esac
-+mingw* | pw32*)
-+ # Base MSYS/MinGW do not provide the 'file' command needed by
-+ # func_win32_libid shell function, so use a weaker test based on 'objdump'.
-+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-+ lt_cv_file_magic_cmd='$OBJDUMP -f'
-+ ;;
-+
-+darwin* | rhapsody*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+freebsd* | kfreebsd*-gnu | dragonfly*)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-+ case $host_cpu in
-+ i*86 )
-+ # Not sure whether the presence of OpenBSD here was a mistake.
-+ # Let's accept both of them until this is cleared up.
-+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-+ ;;
-+ esac
-+ else
-+ lt_cv_deplibs_check_method=pass_all
-+ fi
-+ ;;
-+
-+gnu*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+hpux10.20* | hpux11*)
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ case $host_cpu in
-+ ia64*)
-+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-+ ;;
-+ hppa*64*)
-+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
-+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-+ ;;
-+ *)
-+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
-+ ;;
-+ esac
-+ ;;
-+
-+interix3*)
-+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $LD in
-+ *-32|*"-32 ") libmagic=32-bit;;
-+ *-n32|*"-n32 ") libmagic=N32;;
-+ *-64|*"-64 ") libmagic=64-bit;;
-+ *) libmagic=never-match;;
-+ esac
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+# This must be Linux ELF.
-+linux*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-+ else
-+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
-+ fi
-+ ;;
-+
-+newos6*)
-+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-+ lt_cv_file_magic_cmd=/usr/bin/file
-+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
-+ ;;
-+
-+nto-qnx*)
-+ lt_cv_deplibs_check_method=unknown
-+ ;;
-+
-+openbsd*)
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
-+ else
-+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-+ fi
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+solaris*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+
-+sysv4 | sysv4.3*)
-+ case $host_vendor in
-+ motorola)
-+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-+ ;;
-+ ncr)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+ sequent)
-+ lt_cv_file_magic_cmd='/bin/file'
-+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
-+ ;;
-+ sni)
-+ lt_cv_file_magic_cmd='/bin/file'
-+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
-+ lt_cv_file_magic_test_file=/lib/libc.so
-+ ;;
-+ siemens)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+ pc)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+ esac
-+ ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+ lt_cv_deplibs_check_method=pass_all
-+ ;;
-+esac
-+
-+fi
-+echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
-+file_magic_cmd=$lt_cv_file_magic_cmd
-+deplibs_check_method=$lt_cv_deplibs_check_method
-+test -z "$deplibs_check_method" && deplibs_check_method=unknown
-+
-+
-+
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-+if test "${enable_libtool_lock+set}" = set; then
-+ enableval="$enable_libtool_lock"
-+
-+fi;
-+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-+
-+# Some flags need to be propagated to the compiler or linker for good
-+# libtool support.
-+case $host in
-+ia64-*-hpux*)
-+ # Find out which ABI we are using.
-+ echo 'int i;' > conftest.$ac_ext
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ case `/usr/bin/file conftest.$ac_objext` in
-+ *ELF-32*)
-+ HPUX_IA64_MODE="32"
-+ ;;
-+ *ELF-64*)
-+ HPUX_IA64_MODE="64"
-+ ;;
-+ esac
-+ fi
-+ rm -rf conftest*
-+ ;;
-+*-*-irix6*)
-+ # Find out which ABI we are using.
-+ echo '#line 3427 "configure"' > conftest.$ac_ext
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ case `/usr/bin/file conftest.$ac_objext` in
-+ *32-bit*)
-+ LD="${LD-ld} -melf32bsmip"
-+ ;;
-+ *N32*)
-+ LD="${LD-ld} -melf32bmipn32"
-+ ;;
-+ *64-bit*)
-+ LD="${LD-ld} -melf64bmip"
-+ ;;
-+ esac
-+ else
-+ case `/usr/bin/file conftest.$ac_objext` in
-+ *32-bit*)
-+ LD="${LD-ld} -32"
-+ ;;
-+ *N32*)
-+ LD="${LD-ld} -n32"
-+ ;;
-+ *64-bit*)
-+ LD="${LD-ld} -64"
-+ ;;
-+ esac
-+ fi
-+ fi
-+ rm -rf conftest*
-+ ;;
-+
-+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
-+ # Find out which ABI we are using.
-+ echo 'int i;' > conftest.$ac_ext
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ case `/usr/bin/file conftest.o` in
-+ *32-bit*)
-+ case $host in
-+ x86_64-*linux*)
-+ LD="${LD-ld} -m elf_i386"
-+ ;;
-+ ppc64-*linux*|powerpc64-*linux*)
-+ LD="${LD-ld} -m elf32ppclinux"
-+ ;;
-+ s390x-*linux*)
-+ LD="${LD-ld} -m elf_s390"
-+ ;;
-+ sparc64-*linux*)
-+ LD="${LD-ld} -m elf32_sparc"
-+ ;;
-+ esac
-+ ;;
-+ *64-bit*)
-+ case $host in
-+ x86_64-*linux*)
-+ LD="${LD-ld} -m elf_x86_64"
-+ ;;
-+ ppc*-*linux*|powerpc*-*linux*)
-+ LD="${LD-ld} -m elf64ppc"
-+ ;;
-+ s390*-*linux*)
-+ LD="${LD-ld} -m elf64_s390"
-+ ;;
-+ sparc*-*linux*)
-+ LD="${LD-ld} -m elf64_sparc"
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ fi
-+ rm -rf conftest*
-+ ;;
-+
-+*-*-sco3.2v5*)
-+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-+ SAVE_CFLAGS="$CFLAGS"
-+ CFLAGS="$CFLAGS -belf"
-+ echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
-+if test "${lt_cv_cc_needs_belf+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ lt_cv_cc_needs_belf=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+lt_cv_cc_needs_belf=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+ ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+fi
-+echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
-+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-+ CFLAGS="$SAVE_CFLAGS"
-+ fi
-+ ;;
-+sparc*-*solaris*)
-+ # Find out which ABI we are using.
-+ echo 'int i;' > conftest.$ac_ext
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ case `/usr/bin/file conftest.o` in
-+ *64-bit*)
-+ case $lt_cv_prog_gnu_ld in
-+ yes*) LD="${LD-ld} -m elf64_sparc" ;;
-+ *) LD="${LD-ld} -64" ;;
-+ esac
-+ ;;
-+ esac
-+ fi
-+ rm -rf conftest*
-+ ;;
-+
-+
-+esac
-+
-+need_locks="$enable_libtool_lock"
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
-+# On Suns, sometimes $CPP names a directory.
-+if test -n "$CPP" && test -d "$CPP"; then
-+ CPP=
-+fi
-+if test -z "$CPP"; then
-+ if test "${ac_cv_prog_CPP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # Double quotes because CPP needs to be expanded
-+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-+ do
-+ ac_preproc_ok=false
-+for ac_c_preproc_warn_flag in '' yes
-+do
-+ # Use a header file that comes with gcc, so configuring glibc
-+ # with a fresh cross-compiler works.
-+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ # <limits.h> exists even on freestanding compilers.
-+ # On the NeXT, cc -E runs the code through the compiler's parser,
-+ # not just through cpp. "Syntax error" is here to catch this case.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+ Syntax error
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Broken: fails on valid input.
-+continue
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+
-+ # OK, works on sane cases. Now check whether non-existent headers
-+ # can be detected and how.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <ac_nonexistent.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ # Broken: success on invalid input.
-+continue
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+ break
-+fi
-+
-+ done
-+ ac_cv_prog_CPP=$CPP
-+
-+fi
-+ CPP=$ac_cv_prog_CPP
-+else
-+ ac_cv_prog_CPP=$CPP
-+fi
-+echo "$as_me:$LINENO: result: $CPP" >&5
-+echo "${ECHO_T}$CPP" >&6
-+ac_preproc_ok=false
-+for ac_c_preproc_warn_flag in '' yes
-+do
-+ # Use a header file that comes with gcc, so configuring glibc
-+ # with a fresh cross-compiler works.
-+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ # <limits.h> exists even on freestanding compilers.
-+ # On the NeXT, cc -E runs the code through the compiler's parser,
-+ # not just through cpp. "Syntax error" is here to catch this case.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+ Syntax error
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Broken: fails on valid input.
-+continue
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+
-+ # OK, works on sane cases. Now check whether non-existent headers
-+ # can be detected and how.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <ac_nonexistent.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ # Broken: success on invalid input.
-+continue
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+ :
-+else
-+ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-+if test "${ac_cv_header_stdc+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdlib.h>
-+#include <stdarg.h>
-+#include <string.h>
-+#include <float.h>
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_header_stdc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_header_stdc=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+if test $ac_cv_header_stdc = yes; then
-+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <string.h>
-+
-+_ACEOF
-+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-+ $EGREP "memchr" >/dev/null 2>&1; then
-+ :
-+else
-+ ac_cv_header_stdc=no
-+fi
-+rm -f conftest*
-+
-+fi
-+
-+if test $ac_cv_header_stdc = yes; then
-+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdlib.h>
-+
-+_ACEOF
-+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-+ $EGREP "free" >/dev/null 2>&1; then
-+ :
-+else
-+ ac_cv_header_stdc=no
-+fi
-+rm -f conftest*
-+
-+fi
-+
-+if test $ac_cv_header_stdc = yes; then
-+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-+ if test "$cross_compiling" = yes; then
-+ :
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <ctype.h>
-+#if ((' ' & 0x0FF) == 0x020)
-+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-+#else
-+# define ISLOWER(c) \
-+ (('a' <= (c) && (c) <= 'i') \
-+ || ('j' <= (c) && (c) <= 'r') \
-+ || ('s' <= (c) && (c) <= 'z'))
-+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-+#endif
-+
-+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-+int
-+main ()
-+{
-+ int i;
-+ for (i = 0; i < 256; i++)
-+ if (XOR (islower (i), ISLOWER (i))
-+ || toupper (i) != TOUPPER (i))
-+ exit(2);
-+ exit (0);
-+}
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ :
-+else
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+ac_cv_header_stdc=no
-+fi
-+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+fi
-+fi
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-+echo "${ECHO_T}$ac_cv_header_stdc" >&6
-+if test $ac_cv_header_stdc = yes; then
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define STDC_HEADERS 1
-+_ACEOF
-+
-+fi
-+
-+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-+ inttypes.h stdint.h unistd.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_Header=yes"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_Header=no"
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
-+
-+for ac_header in dlfcn.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+else
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+ yes:no: )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-+ ac_header_preproc=yes
-+ ;;
-+ no:yes:* )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------------ ##
-+## Report this to the AC_PACKAGE_NAME lists. ##
-+## ------------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ eval "$as_ac_Header=\$ac_header_preproc"
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+
-+fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+ac_ext=cc
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+if test -n "$ac_tool_prefix"; then
-+ for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
-+ do
-+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CXX+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$CXX"; then
-+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
-+fi
-+CXX=$ac_cv_prog_CXX
-+if test -n "$CXX"; then
-+ echo "$as_me:$LINENO: result: $CXX" >&5
-+echo "${ECHO_T}$CXX" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+ test -n "$CXX" && break
-+ done
-+fi
-+if test -z "$CXX"; then
-+ ac_ct_CXX=$CXX
-+ for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
-+do
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_CXX"; then
-+ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_CXX="$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
-+fi
-+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
-+if test -n "$ac_ct_CXX"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
-+echo "${ECHO_T}$ac_ct_CXX" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+ test -n "$ac_ct_CXX" && break
-+done
-+test -n "$ac_ct_CXX" || ac_ct_CXX="g++"
-+
-+ CXX=$ac_ct_CXX
-+fi
-+
-+
-+# Provide some information about the compiler.
-+echo "$as_me:$LINENO:" \
-+ "checking for C++ compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-+ (eval $ac_compiler --version </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-+ (eval $ac_compiler -v </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-+ (eval $ac_compiler -V </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+
-+echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6
-+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+#ifndef __GNUC__
-+ choke me
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_compiler_gnu=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_compiler_gnu=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
-+
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6
-+GXX=`test $ac_compiler_gnu = yes && echo yes`
-+ac_test_CXXFLAGS=${CXXFLAGS+set}
-+ac_save_CXXFLAGS=$CXXFLAGS
-+CXXFLAGS="-g"
-+echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
-+echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6
-+if test "${ac_cv_prog_cxx_g+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_prog_cxx_g=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_prog_cxx_g=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6
-+if test "$ac_test_CXXFLAGS" = set; then
-+ CXXFLAGS=$ac_save_CXXFLAGS
-+elif test $ac_cv_prog_cxx_g = yes; then
-+ if test "$GXX" = yes; then
-+ CXXFLAGS="-g -O2"
-+ else
-+ CXXFLAGS="-g"
-+ fi
-+else
-+ if test "$GXX" = yes; then
-+ CXXFLAGS="-O2"
-+ else
-+ CXXFLAGS=
-+ fi
-+fi
-+for ac_declaration in \
-+ '' \
-+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
-+ 'extern "C" void std::exit (int); using std::exit;' \
-+ 'extern "C" void exit (int) throw ();' \
-+ 'extern "C" void exit (int);' \
-+ 'void exit (int);'
-+do
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_declaration
-+#include <stdlib.h>
-+int
-+main ()
-+{
-+exit (42);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+continue
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_declaration
-+int
-+main ()
-+{
-+exit (42);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ break
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+done
-+rm -f conftest*
-+if test -n "$ac_declaration"; then
-+ echo '#ifdef __cplusplus' >>confdefs.h
-+ echo $ac_declaration >>confdefs.h
-+ echo '#endif' >>confdefs.h
-+fi
-+
-+ac_ext=cc
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+
-+
-+
-+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-+ (test "X$CXX" != "Xg++"))) ; then
-+ ac_ext=cc
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
-+echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6
-+if test -z "$CXXCPP"; then
-+ if test "${ac_cv_prog_CXXCPP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # Double quotes because CXXCPP needs to be expanded
-+ for CXXCPP in "$CXX -E" "/lib/cpp"
-+ do
-+ ac_preproc_ok=false
-+for ac_cxx_preproc_warn_flag in '' yes
-+do
-+ # Use a header file that comes with gcc, so configuring glibc
-+ # with a fresh cross-compiler works.
-+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ # <limits.h> exists even on freestanding compilers.
-+ # On the NeXT, cc -E runs the code through the compiler's parser,
-+ # not just through cpp. "Syntax error" is here to catch this case.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+ Syntax error
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_cxx_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Broken: fails on valid input.
-+continue
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+
-+ # OK, works on sane cases. Now check whether non-existent headers
-+ # can be detected and how.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <ac_nonexistent.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_cxx_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ # Broken: success on invalid input.
-+continue
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+ break
-+fi
-+
-+ done
-+ ac_cv_prog_CXXCPP=$CXXCPP
-+
-+fi
-+ CXXCPP=$ac_cv_prog_CXXCPP
-+else
-+ ac_cv_prog_CXXCPP=$CXXCPP
-+fi
-+echo "$as_me:$LINENO: result: $CXXCPP" >&5
-+echo "${ECHO_T}$CXXCPP" >&6
-+ac_preproc_ok=false
-+for ac_cxx_preproc_warn_flag in '' yes
-+do
-+ # Use a header file that comes with gcc, so configuring glibc
-+ # with a fresh cross-compiler works.
-+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ # <limits.h> exists even on freestanding compilers.
-+ # On the NeXT, cc -E runs the code through the compiler's parser,
-+ # not just through cpp. "Syntax error" is here to catch this case.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+ Syntax error
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_cxx_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Broken: fails on valid input.
-+continue
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+
-+ # OK, works on sane cases. Now check whether non-existent headers
-+ # can be detected and how.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <ac_nonexistent.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_cxx_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ # Broken: success on invalid input.
-+continue
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+ :
-+else
-+ { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+ac_ext=cc
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+
-+fi
-+
-+
-+ac_ext=f
-+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-+if test -n "$ac_tool_prefix"; then
-+ for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran
-+ do
-+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_F77+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$F77"; then
-+ ac_cv_prog_F77="$F77" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
-+fi
-+F77=$ac_cv_prog_F77
-+if test -n "$F77"; then
-+ echo "$as_me:$LINENO: result: $F77" >&5
-+echo "${ECHO_T}$F77" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+ test -n "$F77" && break
-+ done
-+fi
-+if test -z "$F77"; then
-+ ac_ct_F77=$F77
-+ for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran
-+do
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_F77"; then
-+ ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_F77="$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
-+fi
-+ac_ct_F77=$ac_cv_prog_ac_ct_F77
-+if test -n "$ac_ct_F77"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
-+echo "${ECHO_T}$ac_ct_F77" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+ test -n "$ac_ct_F77" && break
-+done
-+
-+ F77=$ac_ct_F77
-+fi
-+
-+
-+# Provide some information about the compiler.
-+echo "$as_me:4909:" \
-+ "checking for Fortran 77 compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-+ (eval $ac_compiler --version </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-+ (eval $ac_compiler -v </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-+ (eval $ac_compiler -V </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+rm -f a.out
-+
-+# If we don't use `.F' as extension, the preprocessor is not run on the
-+# input file. (Note that this only needs to work for GNU compilers.)
-+ac_save_ext=$ac_ext
-+ac_ext=F
-+echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6
-+if test "${ac_cv_f77_compiler_gnu+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+ program main
-+#ifndef __GNUC__
-+ choke me
-+#endif
-+
-+ end
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_compiler_gnu=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_compiler_gnu=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_cv_f77_compiler_gnu=$ac_compiler_gnu
-+
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6
-+ac_ext=$ac_save_ext
-+ac_test_FFLAGS=${FFLAGS+set}
-+ac_save_FFLAGS=$FFLAGS
-+FFLAGS=
-+echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
-+echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6
-+if test "${ac_cv_prog_f77_g+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ FFLAGS=-g
-+cat >conftest.$ac_ext <<_ACEOF
-+ program main
-+
-+ end
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_prog_f77_g=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_prog_f77_g=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_f77_g" >&6
-+if test "$ac_test_FFLAGS" = set; then
-+ FFLAGS=$ac_save_FFLAGS
-+elif test $ac_cv_prog_f77_g = yes; then
-+ if test "x$ac_cv_f77_compiler_gnu" = xyes; then
-+ FFLAGS="-g -O2"
-+ else
-+ FFLAGS="-g"
-+ fi
-+else
-+ if test "x$ac_cv_f77_compiler_gnu" = xyes; then
-+ FFLAGS="-O2"
-+ else
-+ FFLAGS=
-+ fi
-+fi
-+
-+G77=`test $ac_compiler_gnu = yes && echo yes`
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+
-+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-+
-+# find the maximum length of command line arguments
-+echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
-+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6
-+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ i=0
-+ teststring="ABCD"
-+
-+ case $build_os in
-+ msdosdjgpp*)
-+ # On DJGPP, this test can blow up pretty badly due to problems in libc
-+ # (any single argument exceeding 2000 bytes causes a buffer overrun
-+ # during glob expansion). Even if it were fixed, the result of this
-+ # check would be larger than it should be.
-+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
-+ ;;
-+
-+ gnu*)
-+ # Under GNU Hurd, this test is not required because there is
-+ # no limit to the length of command line arguments.
-+ # Libtool will interpret -1 as no limit whatsoever
-+ lt_cv_sys_max_cmd_len=-1;
-+ ;;
-+
-+ cygwin* | mingw*)
-+ # On Win9x/ME, this test blows up -- it succeeds, but takes
-+ # about 5 minutes as the teststring grows exponentially.
-+ # Worse, since 9x/ME are not pre-emptively multitasking,
-+ # you end up with a "frozen" computer, even though with patience
-+ # the test eventually succeeds (with a max line length of 256k).
-+ # Instead, let's just punt: use the minimum linelength reported by
-+ # all of the supported platforms: 8192 (on NT/2K/XP).
-+ lt_cv_sys_max_cmd_len=8192;
-+ ;;
-+
-+ amigaos*)
-+ # On AmigaOS with pdksh, this test takes hours, literally.
-+ # So we just punt and use a minimum line length of 8192.
-+ lt_cv_sys_max_cmd_len=8192;
-+ ;;
-+
-+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-+ # This has been around since 386BSD, at least. Likely further.
-+ if test -x /sbin/sysctl; then
-+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-+ elif test -x /usr/sbin/sysctl; then
-+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-+ else
-+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
-+ fi
-+ # And add a safety zone
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-+ ;;
-+
-+ interix*)
-+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
-+ lt_cv_sys_max_cmd_len=196608
-+ ;;
-+
-+ osf*)
-+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-+ # nice to cause kernel panics so lets avoid the loop below.
-+ # First set a reasonable default.
-+ lt_cv_sys_max_cmd_len=16384
-+ #
-+ if test -x /sbin/sysconfig; then
-+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
-+ esac
-+ fi
-+ ;;
-+ sco3.2v5*)
-+ lt_cv_sys_max_cmd_len=102400
-+ ;;
-+ sysv5* | sco5v6* | sysv4.2uw2*)
-+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-+ if test -n "$kargmax"; then
-+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
-+ else
-+ lt_cv_sys_max_cmd_len=32768
-+ fi
-+ ;;
-+ *)
-+ # If test is not a shell built-in, we'll probably end up computing a
-+ # maximum length that is only half of the actual maximum length, but
-+ # we can't tell.
-+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-+ while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
-+ = "XX$teststring") >/dev/null 2>&1 &&
-+ new_result=`expr "X$teststring" : ".*" 2>&1` &&
-+ lt_cv_sys_max_cmd_len=$new_result &&
-+ test $i != 17 # 1/2 MB should be enough
-+ do
-+ i=`expr $i + 1`
-+ teststring=$teststring$teststring
-+ done
-+ teststring=
-+ # Add a significant safety factor because C++ compilers can tack on massive
-+ # amounts of additional arguments before passing them to the linker.
-+ # It appears as though 1/2 is a usable value.
-+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-+ ;;
-+ esac
-+
-+fi
-+
-+if test -n $lt_cv_sys_max_cmd_len ; then
-+ echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
-+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6
-+else
-+ echo "$as_me:$LINENO: result: none" >&5
-+echo "${ECHO_T}none" >&6
-+fi
-+
-+
-+
-+
-+# Check for command to grab the raw symbol name followed by C symbol from nm.
-+echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-+echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6
-+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+
-+# These are sane defaults that work on at least a few old systems.
-+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-+
-+# Character class describing NM global symbol codes.
-+symcode='[BCDEGRST]'
-+
-+# Regexp to match symbols that can be accessed directly from C.
-+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-+
-+# Transform an extracted symbol line into a proper C declaration
-+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-+
-+# Transform an extracted symbol line into symbol name and symbol address
-+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-+
-+# Define system-specific variables.
-+case $host_os in
-+aix*)
-+ symcode='[BCDT]'
-+ ;;
-+cygwin* | mingw* | pw32*)
-+ symcode='[ABCDGISTW]'
-+ ;;
-+hpux*) # Its linker distinguishes data from code symbols
-+ if test "$host_cpu" = ia64; then
-+ symcode='[ABCDEGRST]'
-+ fi
-+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-+ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-+ ;;
-+linux*)
-+ if test "$host_cpu" = ia64; then
-+ symcode='[ABCDGIRSTW]'
-+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-+ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-+ fi
-+ ;;
-+irix* | nonstopux*)
-+ symcode='[BCDEGRST]'
-+ ;;
-+osf*)
-+ symcode='[BCDEGQRST]'
-+ ;;
-+solaris*)
-+ symcode='[BDRT]'
-+ ;;
-+sco3.2v5*)
-+ symcode='[DT]'
-+ ;;
-+sysv4.2uw2*)
-+ symcode='[DT]'
-+ ;;
-+sysv5* | sco5v6* | unixware* | OpenUNIX*)
-+ symcode='[ABDT]'
-+ ;;
-+sysv4)
-+ symcode='[DFNSTU]'
-+ ;;
-+esac
-+
-+# Handle CRLF in mingw tool chain
-+opt_cr=
-+case $build_os in
-+mingw*)
-+ opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-+ ;;
-+esac
-+
-+# If we're using GNU nm, then use its standard symbol codes.
-+case `$NM -V 2>&1` in
-+*GNU* | *'with BFD'*)
-+ symcode='[ABCDGIRSTW]' ;;
-+esac
-+
-+# Try without a prefix undercore, then with it.
-+for ac_symprfx in "" "_"; do
-+
-+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-+ symxfrm="\\1 $ac_symprfx\\2 \\2"
-+
-+ # Write the raw and C identifiers.
-+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-+
-+ # Check to see that the pipe works correctly.
-+ pipe_works=no
-+
-+ rm -f conftest*
-+ cat > conftest.$ac_ext <<EOF
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+char nm_test_var;
-+void nm_test_func(){}
-+#ifdef __cplusplus
-+}
-+#endif
-+int main(){nm_test_var='a';nm_test_func();return(0);}
-+EOF
-+
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ # Now try to grab the symbols.
-+ nlist=conftest.nm
-+ if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
-+ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && test -s "$nlist"; then
-+ # Try sorting and uniquifying the output.
-+ if sort "$nlist" | uniq > "$nlist"T; then
-+ mv -f "$nlist"T "$nlist"
-+ else
-+ rm -f "$nlist"T
-+ fi
-+
-+ # Make sure that we snagged all the symbols we need.
-+ if grep ' nm_test_var$' "$nlist" >/dev/null; then
-+ if grep ' nm_test_func$' "$nlist" >/dev/null; then
-+ cat <<EOF > conftest.$ac_ext
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+EOF
-+ # Now generate the symbol file.
-+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-+
-+ cat <<EOF >> conftest.$ac_ext
-+#if defined (__STDC__) && __STDC__
-+# define lt_ptr_t void *
-+#else
-+# define lt_ptr_t char *
-+# define const
-+#endif
-+
-+/* The mapping between symbol names and symbols. */
-+const struct {
-+ const char *name;
-+ lt_ptr_t address;
-+}
-+lt_preloaded_symbols[] =
-+{
-+EOF
-+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-+ cat <<\EOF >> conftest.$ac_ext
-+ {0, (lt_ptr_t) 0}
-+};
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+EOF
-+ # Now try linking the two files.
-+ mv conftest.$ac_objext conftstm.$ac_objext
-+ lt_save_LIBS="$LIBS"
-+ lt_save_CFLAGS="$CFLAGS"
-+ LIBS="conftstm.$ac_objext"
-+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
-+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && test -s conftest${ac_exeext}; then
-+ pipe_works=yes
-+ fi
-+ LIBS="$lt_save_LIBS"
-+ CFLAGS="$lt_save_CFLAGS"
-+ else
-+ echo "cannot find nm_test_func in $nlist" >&5
-+ fi
-+ else
-+ echo "cannot find nm_test_var in $nlist" >&5
-+ fi
-+ else
-+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
-+ fi
-+ else
-+ echo "$progname: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ fi
-+ rm -f conftest* conftst*
-+
-+ # Do not use the global_symbol_pipe unless it works.
-+ if test "$pipe_works" = yes; then
-+ break
-+ else
-+ lt_cv_sys_global_symbol_pipe=
-+ fi
-+done
-+
-+fi
-+
-+if test -z "$lt_cv_sys_global_symbol_pipe"; then
-+ lt_cv_sys_global_symbol_to_cdecl=
-+fi
-+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-+ echo "$as_me:$LINENO: result: failed" >&5
-+echo "${ECHO_T}failed" >&6
-+else
-+ echo "$as_me:$LINENO: result: ok" >&5
-+echo "${ECHO_T}ok" >&6
-+fi
-+
-+echo "$as_me:$LINENO: checking for objdir" >&5
-+echo $ECHO_N "checking for objdir... $ECHO_C" >&6
-+if test "${lt_cv_objdir+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ rm -f .libs 2>/dev/null
-+mkdir .libs 2>/dev/null
-+if test -d .libs; then
-+ lt_cv_objdir=.libs
-+else
-+ # MS-DOS does not allow filenames that begin with a dot.
-+ lt_cv_objdir=_libs
-+fi
-+rmdir .libs 2>/dev/null
-+fi
-+echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
-+echo "${ECHO_T}$lt_cv_objdir" >&6
-+objdir=$lt_cv_objdir
-+
-+
-+
-+
-+
-+case $host_os in
-+aix3*)
-+ # AIX sometimes has problems with the GCC collect2 program. For some
-+ # reason, if we set the COLLECT_NAMES environment variable, the problems
-+ # vanish in a puff of smoke.
-+ if test "X${COLLECT_NAMES+set}" != Xset; then
-+ COLLECT_NAMES=
-+ export COLLECT_NAMES
-+ fi
-+ ;;
-+esac
-+
-+# Sed substitution that helps us do robust quoting. It backslashifies
-+# metacharacters that are still active within double-quoted strings.
-+Xsed='sed -e 1s/^X//'
-+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
-+
-+# Same as above, but do not quote variable references.
-+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
-+
-+# Sed substitution to delay expansion of an escaped shell variable in a
-+# double_quote_subst'ed string.
-+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-+
-+# Sed substitution to avoid accidental globbing in evaled expressions
-+no_glob_subst='s/\*/\\\*/g'
-+
-+# Constants:
-+rm="rm -f"
-+
-+# Global variables:
-+default_ofile=libtool
-+can_build_shared=yes
-+
-+# All known linkers require a `.a' archive for static linking (except MSVC,
-+# which needs '.lib').
-+libext=a
-+ltmain="$ac_aux_dir/ltmain.sh"
-+ofile="$default_ofile"
-+with_gnu_ld="$lt_cv_prog_gnu_ld"
-+
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}ar; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_AR+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$AR"; then
-+ ac_cv_prog_AR="$AR" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_AR="${ac_tool_prefix}ar"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
-+fi
-+AR=$ac_cv_prog_AR
-+if test -n "$AR"; then
-+ echo "$as_me:$LINENO: result: $AR" >&5
-+echo "${ECHO_T}$AR" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+fi
-+if test -z "$ac_cv_prog_AR"; then
-+ ac_ct_AR=$AR
-+ # Extract the first word of "ar", so it can be a program name with args.
-+set dummy ar; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_AR"; then
-+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_AR="ar"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+ test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false"
-+fi
-+fi
-+ac_ct_AR=$ac_cv_prog_ac_ct_AR
-+if test -n "$ac_ct_AR"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-+echo "${ECHO_T}$ac_ct_AR" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+ AR=$ac_ct_AR
-+else
-+ AR="$ac_cv_prog_AR"
-+fi
-+
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_RANLIB+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$RANLIB"; then
-+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
-+fi
-+RANLIB=$ac_cv_prog_RANLIB
-+if test -n "$RANLIB"; then
-+ echo "$as_me:$LINENO: result: $RANLIB" >&5
-+echo "${ECHO_T}$RANLIB" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+fi
-+if test -z "$ac_cv_prog_RANLIB"; then
-+ ac_ct_RANLIB=$RANLIB
-+ # Extract the first word of "ranlib", so it can be a program name with args.
-+set dummy ranlib; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_RANLIB"; then
-+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_RANLIB="ranlib"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+ test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
-+fi
-+fi
-+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-+if test -n "$ac_ct_RANLIB"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-+echo "${ECHO_T}$ac_ct_RANLIB" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+ RANLIB=$ac_ct_RANLIB
-+else
-+ RANLIB="$ac_cv_prog_RANLIB"
-+fi
-+
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}strip; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_STRIP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$STRIP"; then
-+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
-+fi
-+STRIP=$ac_cv_prog_STRIP
-+if test -n "$STRIP"; then
-+ echo "$as_me:$LINENO: result: $STRIP" >&5
-+echo "${ECHO_T}$STRIP" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+fi
-+if test -z "$ac_cv_prog_STRIP"; then
-+ ac_ct_STRIP=$STRIP
-+ # Extract the first word of "strip", so it can be a program name with args.
-+set dummy strip; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_STRIP"; then
-+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_STRIP="strip"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+ test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
-+fi
-+fi
-+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-+if test -n "$ac_ct_STRIP"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-+echo "${ECHO_T}$ac_ct_STRIP" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+ STRIP=$ac_ct_STRIP
-+else
-+ STRIP="$ac_cv_prog_STRIP"
-+fi
-+
-+
-+old_CC="$CC"
-+old_CFLAGS="$CFLAGS"
-+
-+# Set sane defaults for various variables
-+test -z "$AR" && AR=ar
-+test -z "$AR_FLAGS" && AR_FLAGS=cru
-+test -z "$AS" && AS=as
-+test -z "$CC" && CC=cc
-+test -z "$LTCC" && LTCC=$CC
-+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-+test -z "$DLLTOOL" && DLLTOOL=dlltool
-+test -z "$LD" && LD=ld
-+test -z "$LN_S" && LN_S="ln -s"
-+test -z "$MAGIC_CMD" && MAGIC_CMD=file
-+test -z "$NM" && NM=nm
-+test -z "$SED" && SED=sed
-+test -z "$OBJDUMP" && OBJDUMP=objdump
-+test -z "$RANLIB" && RANLIB=:
-+test -z "$STRIP" && STRIP=:
-+test -z "$ac_objext" && ac_objext=o
-+
-+# Determine commands to create old-style static archives.
-+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-+old_postinstall_cmds='chmod 644 $oldlib'
-+old_postuninstall_cmds=
-+
-+if test -n "$RANLIB"; then
-+ case $host_os in
-+ openbsd*)
-+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-+ ;;
-+ *)
-+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-+ ;;
-+ esac
-+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-+fi
-+
-+for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+
-+# Only perform the check for file, if the check method requires it
-+case $deplibs_check_method in
-+file_magic*)
-+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-+ echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
-+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ case $MAGIC_CMD in
-+[\\/*] | ?:[\\/]*)
-+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-+ ;;
-+*)
-+ lt_save_MAGIC_CMD="$MAGIC_CMD"
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-+ for ac_dir in $ac_dummy; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f $ac_dir/${ac_tool_prefix}file; then
-+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-+ if test -n "$file_magic_test_file"; then
-+ case $deplibs_check_method in
-+ "file_magic "*)
-+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-+ $EGREP "$file_magic_regex" > /dev/null; then
-+ :
-+ else
-+ cat <<EOF 1>&2
-+
-+*** Warning: the command libtool uses to detect shared libraries,
-+*** $file_magic_cmd, produces output that libtool cannot recognize.
-+*** The result is that libtool may fail to recognize shared libraries
-+*** as such. This will affect the creation of libtool libraries that
-+*** depend on shared libraries, but programs linked with such libtool
-+*** libraries will work regardless of this problem. Nevertheless, you
-+*** may want to report the problem to your system manager and/or to
-+*** bug-libtool at gnu.org
-+
-+EOF
-+ fi ;;
-+ esac
-+ fi
-+ break
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ MAGIC_CMD="$lt_save_MAGIC_CMD"
-+ ;;
-+esac
-+fi
-+
-+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+if test -n "$MAGIC_CMD"; then
-+ echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-+echo "${ECHO_T}$MAGIC_CMD" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+if test -z "$lt_cv_path_MAGIC_CMD"; then
-+ if test -n "$ac_tool_prefix"; then
-+ echo "$as_me:$LINENO: checking for file" >&5
-+echo $ECHO_N "checking for file... $ECHO_C" >&6
-+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ case $MAGIC_CMD in
-+[\\/*] | ?:[\\/]*)
-+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-+ ;;
-+*)
-+ lt_save_MAGIC_CMD="$MAGIC_CMD"
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-+ for ac_dir in $ac_dummy; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f $ac_dir/file; then
-+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
-+ if test -n "$file_magic_test_file"; then
-+ case $deplibs_check_method in
-+ "file_magic "*)
-+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-+ $EGREP "$file_magic_regex" > /dev/null; then
-+ :
-+ else
-+ cat <<EOF 1>&2
-+
-+*** Warning: the command libtool uses to detect shared libraries,
-+*** $file_magic_cmd, produces output that libtool cannot recognize.
-+*** The result is that libtool may fail to recognize shared libraries
-+*** as such. This will affect the creation of libtool libraries that
-+*** depend on shared libraries, but programs linked with such libtool
-+*** libraries will work regardless of this problem. Nevertheless, you
-+*** may want to report the problem to your system manager and/or to
-+*** bug-libtool at gnu.org
-+
-+EOF
-+ fi ;;
-+ esac
-+ fi
-+ break
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+ MAGIC_CMD="$lt_save_MAGIC_CMD"
-+ ;;
-+esac
-+fi
-+
-+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-+if test -n "$MAGIC_CMD"; then
-+ echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-+echo "${ECHO_T}$MAGIC_CMD" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+ else
-+ MAGIC_CMD=:
-+ fi
-+fi
-+
-+ fi
-+ ;;
-+esac
-+
-+enable_dlopen=no
-+enable_win32_dll=no
-+
-+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-+if test "${enable_libtool_lock+set}" = set; then
-+ enableval="$enable_libtool_lock"
-+
-+fi;
-+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-+
-+
-+# Check whether --with-pic or --without-pic was given.
-+if test "${with_pic+set}" = set; then
-+ withval="$with_pic"
-+ pic_mode="$withval"
-+else
-+ pic_mode=default
-+fi;
-+test -z "$pic_mode" && pic_mode=default
-+
-+# Use C for the default configuration in the libtool script
-+tagname=
-+lt_save_CC="$CC"
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+# Source file extension for C test sources.
-+ac_ext=c
-+
-+# Object file extension for compiled C test sources.
-+objext=o
-+objext=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="int some_variable = 0;\n"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='int main(){return(0);}\n'
-+
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+printf "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+
-+
-+lt_prog_compiler_no_builtin_flag=
-+
-+if test "$GCC" = yes; then
-+ lt_prog_compiler_no_builtin_flag=' -fno-builtin'
-+
-+
-+echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
-+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_rtti_exceptions=no
-+ ac_outfile=conftest.$ac_objext
-+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="-fno-rtti -fno-exceptions"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:5970: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&5
-+ echo "$as_me:5974: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings other than the usual output.
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_rtti_exceptions=yes
-+ fi
-+ fi
-+ $rm conftest*
-+
-+fi
-+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
-+
-+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-+ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
-+else
-+ :
-+fi
-+
-+fi
-+
-+lt_prog_compiler_wl=
-+lt_prog_compiler_pic=
-+lt_prog_compiler_static=
-+
-+echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
-+
-+ if test "$GCC" = yes; then
-+ lt_prog_compiler_wl='-Wl,'
-+ lt_prog_compiler_static='-static'
-+
-+ case $host_os in
-+ aix*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static='-Bstatic'
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ # FIXME: we need at least 68020 code to build shared libraries, but
-+ # adding the `-m68020' flag to GCC prevents building anything better,
-+ # like `-m68040'.
-+ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
-+ ;;
-+
-+ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+ # PIC is the default for these OSes.
-+ ;;
-+
-+ mingw* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ lt_prog_compiler_pic='-DDLL_EXPORT'
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ lt_prog_compiler_pic='-fno-common'
-+ ;;
-+
-+ interix3*)
-+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+ # Instead, we relocate shared libraries at runtime.
-+ ;;
-+
-+ msdosdjgpp*)
-+ # Just because we use GCC doesn't mean we suddenly get shared libraries
-+ # on systems that don't support them.
-+ lt_prog_compiler_can_build_shared=no
-+ enable_shared=no
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ lt_prog_compiler_pic=-Kconform_pic
-+ fi
-+ ;;
-+
-+ hpux*)
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic='-fPIC'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ lt_prog_compiler_pic='-fPIC'
-+ ;;
-+ esac
-+ else
-+ # PORTME Check for flag to pass linker flags through the system compiler.
-+ case $host_os in
-+ aix*)
-+ lt_prog_compiler_wl='-Wl,'
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static='-Bstatic'
-+ else
-+ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
-+ fi
-+ ;;
-+ darwin*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ case $cc_basename in
-+ xlc*)
-+ lt_prog_compiler_pic='-qnocommon'
-+ lt_prog_compiler_wl='-Wl,'
-+ ;;
-+ esac
-+ ;;
-+
-+ mingw* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ lt_prog_compiler_pic='-DDLL_EXPORT'
-+ ;;
-+
-+ hpux9* | hpux10* | hpux11*)
-+ lt_prog_compiler_wl='-Wl,'
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic='+Z'
-+ ;;
-+ esac
-+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
-+ lt_prog_compiler_static='${wl}-a ${wl}archive'
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ lt_prog_compiler_wl='-Wl,'
-+ # PIC (with -KPIC) is the default.
-+ lt_prog_compiler_static='-non_shared'
-+ ;;
-+
-+ newsos6)
-+ lt_prog_compiler_pic='-KPIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
-+
-+ linux*)
-+ case $cc_basename in
-+ icc* | ecc*)
-+ lt_prog_compiler_wl='-Wl,'
-+ lt_prog_compiler_pic='-KPIC'
-+ lt_prog_compiler_static='-static'
-+ ;;
-+ pgcc* | pgf77* | pgf90* | pgf95*)
-+ # Portland Group compilers (*not* the Pentium gcc compiler,
-+ # which looks to be a dead project)
-+ lt_prog_compiler_wl='-Wl,'
-+ lt_prog_compiler_pic='-fpic'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
-+ ccc*)
-+ lt_prog_compiler_wl='-Wl,'
-+ # All Alpha code is PIC.
-+ lt_prog_compiler_static='-non_shared'
-+ ;;
-+ esac
-+ ;;
-+
-+ osf3* | osf4* | osf5*)
-+ lt_prog_compiler_wl='-Wl,'
-+ # All OSF/1 code is PIC.
-+ lt_prog_compiler_static='-non_shared'
-+ ;;
-+
-+ solaris*)
-+ lt_prog_compiler_pic='-KPIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ case $cc_basename in
-+ f77* | f90* | f95*)
-+ lt_prog_compiler_wl='-Qoption ld ';;
-+ *)
-+ lt_prog_compiler_wl='-Wl,';;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ lt_prog_compiler_wl='-Qoption ld '
-+ lt_prog_compiler_pic='-PIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
-+
-+ sysv4 | sysv4.2uw2* | sysv4.3*)
-+ lt_prog_compiler_wl='-Wl,'
-+ lt_prog_compiler_pic='-KPIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ lt_prog_compiler_pic='-Kconform_pic'
-+ lt_prog_compiler_static='-Bstatic'
-+ fi
-+ ;;
-+
-+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+ lt_prog_compiler_wl='-Wl,'
-+ lt_prog_compiler_pic='-KPIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
-+
-+ unicos*)
-+ lt_prog_compiler_wl='-Wl,'
-+ lt_prog_compiler_can_build_shared=no
-+ ;;
-+
-+ uts4*)
-+ lt_prog_compiler_pic='-pic'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
-+
-+ *)
-+ lt_prog_compiler_can_build_shared=no
-+ ;;
-+ esac
-+ fi
-+
-+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic" >&6
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$lt_prog_compiler_pic"; then
-+
-+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6
-+if test "${lt_prog_compiler_pic_works+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_prog_compiler_pic_works=no
-+ ac_outfile=conftest.$ac_objext
-+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:6238: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&5
-+ echo "$as_me:6242: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings other than the usual output.
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_prog_compiler_pic_works=yes
-+ fi
-+ fi
-+ $rm conftest*
-+
-+fi
-+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6
-+
-+if test x"$lt_prog_compiler_pic_works" = xyes; then
-+ case $lt_prog_compiler_pic in
-+ "" | " "*) ;;
-+ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
-+ esac
-+else
-+ lt_prog_compiler_pic=
-+ lt_prog_compiler_can_build_shared=no
-+fi
-+
-+fi
-+case $host_os in
-+ # For platforms which do not support PIC, -DPIC is meaningless:
-+ *djgpp*)
-+ lt_prog_compiler_pic=
-+ ;;
-+ *)
-+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
-+ ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
-+if test "${lt_prog_compiler_static_works+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_prog_compiler_static_works=no
-+ save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-+ printf "$lt_simple_link_test_code" > conftest.$ac_ext
-+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+ # The linker can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ if test -s conftest.err; then
-+ # Append any errors to the config.log.
-+ cat conftest.err 1>&5
-+ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_prog_compiler_static_works=yes
-+ fi
-+ else
-+ lt_prog_compiler_static_works=yes
-+ fi
-+ fi
-+ $rm conftest*
-+ LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
-+echo "${ECHO_T}$lt_prog_compiler_static_works" >&6
-+
-+if test x"$lt_prog_compiler_static_works" = xyes; then
-+ :
-+else
-+ lt_prog_compiler_static=
-+fi
-+
-+
-+echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
-+if test "${lt_cv_prog_compiler_c_o+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_c_o=no
-+ $rm -r conftest 2>/dev/null
-+ mkdir conftest
-+ cd conftest
-+ mkdir out
-+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ lt_compiler_flag="-o out/conftest2.$ac_objext"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:6342: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>out/conftest.err)
-+ ac_status=$?
-+ cat out/conftest.err >&5
-+ echo "$as_me:6346: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+ then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_c_o=yes
-+ fi
-+ fi
-+ chmod u+w . 2>&5
-+ $rm conftest*
-+ # SGI C++ compiler will create directory out/ii_files/ for
-+ # template instantiation
-+ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+ $rm out/* && rmdir out
-+ cd ..
-+ rmdir conftest
-+ $rm conftest*
-+
-+fi
-+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6
-+
-+
-+hard_links="nottested"
-+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
-+ # do not overwrite the value of need_locks provided by the user
-+ echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
-+ hard_links=yes
-+ $rm conftest*
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ touch conftest.a
-+ ln conftest.a conftest.b 2>&5 || hard_links=no
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6
-+ if test "$hard_links" = no; then
-+ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-+ need_locks=warn
-+ fi
-+else
-+ need_locks=no
-+fi
-+
-+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
-+
-+ runpath_var=
-+ allow_undefined_flag=
-+ enable_shared_with_static_runtimes=no
-+ archive_cmds=
-+ archive_expsym_cmds=
-+ old_archive_From_new_cmds=
-+ old_archive_from_expsyms_cmds=
-+ export_dynamic_flag_spec=
-+ whole_archive_flag_spec=
-+ thread_safe_flag_spec=
-+ hardcode_libdir_flag_spec=
-+ hardcode_libdir_flag_spec_ld=
-+ hardcode_libdir_separator=
-+ hardcode_direct=no
-+ hardcode_minus_L=no
-+ hardcode_shlibpath_var=unsupported
-+ link_all_deplibs=unknown
-+ hardcode_automatic=no
-+ module_cmds=
-+ module_expsym_cmds=
-+ always_export_symbols=no
-+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ # include_expsyms should be a list of space-separated symbols to be *always*
-+ # included in the symbol list
-+ include_expsyms=
-+ # exclude_expsyms can be an extended regexp of symbols to exclude
-+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
-+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-+ # as well as any symbol that contains `d'.
-+ exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
-+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-+ # platforms (ab)use it in PIC code, but their linkers get confused if
-+ # the symbol is explicitly referenced. Since portable code cannot
-+ # rely on this symbol name, it's probably fine to never include it in
-+ # preloaded symbol tables.
-+ extract_expsyms_cmds=
-+ # Just being paranoid about ensuring that cc_basename is set.
-+ for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+ case $host_os in
-+ cygwin* | mingw* | pw32*)
-+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ if test "$GCC" != yes; then
-+ with_gnu_ld=no
-+ fi
-+ ;;
-+ interix*)
-+ # we just hope/assume this is gcc and not c89 (= MSVC++)
-+ with_gnu_ld=yes
-+ ;;
-+ openbsd*)
-+ with_gnu_ld=no
-+ ;;
-+ esac
-+
-+ ld_shlibs=yes
-+ if test "$with_gnu_ld" = yes; then
-+ # If archive_cmds runs LD, not CC, wlarc should be empty
-+ wlarc='${wl}'
-+
-+ # Set some defaults for GNU ld with shared library support. These
-+ # are reset later if shared libraries are not supported. Putting them
-+ # here allows them to be overridden if necessary.
-+ runpath_var=LD_RUN_PATH
-+ hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
-+ export_dynamic_flag_spec='${wl}--export-dynamic'
-+ # ancient GNU ld didn't support --whole-archive et. al.
-+ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ else
-+ whole_archive_flag_spec=
-+ fi
-+ supports_anon_versioning=no
-+ case `$LD -v 2>/dev/null` in
-+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-+ *\ 2.11.*) ;; # other 2.11 versions
-+ *) supports_anon_versioning=yes ;;
-+ esac
-+
-+ # See if GNU ld supports shared libraries.
-+ case $host_os in
-+ aix3* | aix4* | aix5*)
-+ # On AIX/PPC, the GNU linker is very broken
-+ if test "$host_cpu" != ia64; then
-+ ld_shlibs=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-+*** to be unable to reliably create shared libraries on AIX.
-+*** Therefore, libtool is disabling shared libraries support. If you
-+*** really care for shared libraries, you may want to modify your PATH
-+*** so that a non-GNU linker is found, and then restart.
-+
-+EOF
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_minus_L=yes
-+
-+ # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-+ # that the semantics of dynamic libraries on AmigaOS, at least up
-+ # to version 4, is to share data among multiple programs linked
-+ # with the same dynamic library. Since this doesn't match the
-+ # behavior of shared libraries on other platforms, we can't use
-+ # them.
-+ ld_shlibs=no
-+ ;;
-+
-+ beos*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ allow_undefined_flag=unsupported
-+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-+ # support --undefined. This deserves some investigation. FIXME
-+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
-+ # as there is no search path for DLLs.
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ allow_undefined_flag=unsupported
-+ always_export_symbols=no
-+ enable_shared_with_static_runtimes=yes
-+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
-+
-+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ # If the export-symbols file already is a .def file (1st line
-+ # is EXPORTS), use it as is; otherwise, prepend...
-+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname.def;
-+ else
-+ echo EXPORTS > $output_objdir/$soname.def;
-+ cat $export_symbols >> $output_objdir/$soname.def;
-+ fi~
-+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+
-+ interix3*)
-+ hardcode_direct=no
-+ hardcode_shlibpath_var=no
-+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec='${wl}-E'
-+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+ # Instead, shared libraries are loaded at an image base (0x10000000 by
-+ # default) and relocated if they conflict, which is a slow very memory
-+ # consuming and fragmenting process. To avoid this, we pick a random,
-+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ ;;
-+
-+ linux*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ tmp_addflag=
-+ case $cc_basename,$host_cpu in
-+ pgcc*) # Portland Group C compiler
-+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag'
-+ ;;
-+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
-+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag -Mnomain' ;;
-+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
-+ tmp_addflag=' -i_dynamic' ;;
-+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
-+ tmp_addflag=' -i_dynamic -nofor_main' ;;
-+ ifc* | ifort*) # Intel Fortran compiler
-+ tmp_addflag=' -nofor_main' ;;
-+ esac
-+ archive_cmds='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+
-+ if test $supports_anon_versioning = yes; then
-+ archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
-+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-+ $echo "local: *; };" >> $output_objdir/$libname.ver~
-+ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-+ fi
-+ link_all_deplibs=no
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-+ wlarc=
-+ else
-+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ fi
-+ ;;
-+
-+ solaris*)
-+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-+ ld_shlibs=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-+*** create shared libraries on Solaris systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.9.1 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+EOF
-+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-+ case `$LD -v 2>&1` in
-+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-+ ld_shlibs=no
-+ cat <<_LT_EOF 1>&2
-+
-+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-+*** reliably create shared libraries on SCO systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+_LT_EOF
-+ ;;
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ wlarc=
-+ hardcode_direct=yes
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ ld_shlibs=no
-+ fi
-+ ;;
-+ esac
-+
-+ if test "$ld_shlibs" = no; then
-+ runpath_var=
-+ hardcode_libdir_flag_spec=
-+ export_dynamic_flag_spec=
-+ whole_archive_flag_spec=
-+ fi
-+ else
-+ # PORTME fill in a description of your system's linker (not GNU ld)
-+ case $host_os in
-+ aix3*)
-+ allow_undefined_flag=unsupported
-+ always_export_symbols=yes
-+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-+ # Note: this linker hardcodes the directories in LIBPATH if there
-+ # are no directories specified by -L.
-+ hardcode_minus_L=yes
-+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-+ # Neither direct hardcoding nor static linking is supported with a
-+ # broken collect2.
-+ hardcode_direct=unsupported
-+ fi
-+ ;;
-+
-+ aix4* | aix5*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ exp_sym_flag='-Bexport'
-+ no_entry_flag=""
-+ else
-+ # If we're using GNU nm, then we don't want the "-C" option.
-+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
-+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ else
-+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ fi
-+ aix_use_runtimelinking=no
-+
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-+ for ld_flag in $LDFLAGS; do
-+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-+ aix_use_runtimelinking=yes
-+ break
-+ fi
-+ done
-+ ;;
-+ esac
-+
-+ exp_sym_flag='-bexport'
-+ no_entry_flag='-bnoentry'
-+ fi
-+
-+ # When large executables or shared objects are built, AIX ld can
-+ # have problems creating the table of contents. If linking a library
-+ # or program results in "error TOC overflow" add -mminimal-toc to
-+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+ archive_cmds=''
-+ hardcode_direct=yes
-+ hardcode_libdir_separator=':'
-+ link_all_deplibs=yes
-+
-+ if test "$GCC" = yes; then
-+ case $host_os in aix4.[012]|aix4.[012].*)
-+ # We only want to do this on AIX 4.2 and lower, the check
-+ # below for broken collect2 doesn't work under 4.3+
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ hardcode_direct=yes
-+ else
-+ # We have old collect2
-+ hardcode_direct=unsupported
-+ # It fails to find uninstalled libraries when the uninstalled
-+ # path is not listed in the libpath. Setting hardcode_minus_L
-+ # to unsupported forces relinking
-+ hardcode_minus_L=yes
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_libdir_separator=
-+ fi
-+ ;;
-+ esac
-+ shared_flag='-shared'
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag="$shared_flag "'${wl}-G'
-+ fi
-+ else
-+ # not using gcc
-+ if test "$host_cpu" = ia64; then
-+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+ # chokes on -Wl,-G. The following line is correct:
-+ shared_flag='-G'
-+ else
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag='${wl}-G'
-+ else
-+ shared_flag='${wl}-bM:SRE'
-+ fi
-+ fi
-+ fi
-+
-+ # It seems that -bexpall does not export symbols beginning with
-+ # underscore (_), so it is better to generate a list of symbols to export.
-+ always_export_symbols=yes
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # Warning - without using the other runtime loading flags (-brtl),
-+ # -berok will link without error, but may produce a broken library.
-+ allow_undefined_flag='-berok'
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`; fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+ else
-+ if test "$host_cpu" = ia64; then
-+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-+ allow_undefined_flag="-z nodefs"
-+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+ else
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`; fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ # Warning - without using the other run time loading flags,
-+ # -berok will link without error, but may produce a broken library.
-+ no_undefined_flag=' ${wl}-bernotok'
-+ allow_undefined_flag=' ${wl}-berok'
-+ # Exported symbols can be pulled into shared objects from archives
-+ whole_archive_flag_spec='$convenience'
-+ archive_cmds_need_lc=yes
-+ # This is similar to how AIX traditionally builds its shared libraries.
-+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+ fi
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_minus_L=yes
-+ # see comment about different semantics on the GNU ld section
-+ ld_shlibs=no
-+ ;;
-+
-+ bsdi[45]*)
-+ export_dynamic_flag_spec=-rdynamic
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ # hardcode_libdir_flag_spec is actually meaningless, as there is
-+ # no search path for DLLs.
-+ hardcode_libdir_flag_spec=' '
-+ allow_undefined_flag=unsupported
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-+ # The linker will automatically build a .lib file if we build a DLL.
-+ old_archive_From_new_cmds='true'
-+ # FIXME: Should let the user specify the lib program.
-+ old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
-+ fix_srcfile_path='`cygpath -w "$srcfile"`'
-+ enable_shared_with_static_runtimes=yes
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ case $host_os in
-+ rhapsody* | darwin1.[012])
-+ allow_undefined_flag='${wl}-undefined ${wl}suppress'
-+ ;;
-+ *) # Darwin 1.3 on
-+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+ allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ else
-+ case ${MACOSX_DEPLOYMENT_TARGET} in
-+ 10.[012])
-+ allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ ;;
-+ 10.*)
-+ allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+ esac
-+ archive_cmds_need_lc=no
-+ hardcode_direct=no
-+ hardcode_automatic=yes
-+ hardcode_shlibpath_var=unsupported
-+ whole_archive_flag_spec=''
-+ link_all_deplibs=yes
-+ if test "$GCC" = yes ; then
-+ output_verbose_link_cmd='echo'
-+ archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+ module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ else
-+ case $cc_basename in
-+ xlc*)
-+ output_verbose_link_cmd='echo'
-+ archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
-+ module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ ;;
-+ *)
-+ ld_shlibs=no
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ dgux*)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ freebsd1*)
-+ ld_shlibs=no
-+ ;;
-+
-+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-+ # support. Future versions do this automatically, but an explicit c++rt0.o
-+ # does not break anything, and helps significantly (at the cost of a little
-+ # extra space).
-+ freebsd2.2*)
-+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ hardcode_direct=yes
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-+ freebsd2*)
-+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct=yes
-+ hardcode_minus_L=yes
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-+ freebsd* | dragonfly*)
-+ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ hardcode_direct=yes
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ # GNU/kFreeBSD uses gcc -shared to do shared libraries.
-+ kfreebsd*-gnu)
-+ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ hardcode_direct=yes
-+ hardcode_shlibpath_var=no
-+ link_all_deplibs=no
-+ ;;
-+
-+ hpux9*)
-+ if test "$GCC" = yes; then
-+ archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ else
-+ archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ fi
-+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ hardcode_direct=yes
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L=yes
-+ export_dynamic_flag_spec='${wl}-E'
-+ ;;
-+
-+ hpux10*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+
-+ hardcode_direct=yes
-+ export_dynamic_flag_spec='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L=yes
-+ fi
-+ ;;
-+
-+ hpux11*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ else
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ hardcode_libdir_flag_spec_ld='+b $libdir'
-+ hardcode_direct=no
-+ hardcode_shlibpath_var=no
-+ ;;
-+ *)
-+ hardcode_direct=yes
-+ export_dynamic_flag_spec='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L=yes
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ if test "$GCC" = yes; then
-+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec_ld='-rpath $libdir'
-+ fi
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ link_all_deplibs=yes
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-+ else
-+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-+ fi
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ hardcode_direct=yes
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ newsos6)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct=yes
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ openbsd*)
-+ hardcode_direct=yes
-+ hardcode_shlibpath_var=no
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec='${wl}-E'
-+ else
-+ case $host_os in
-+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ ;;
-+ *)
-+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ os2*)
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_minus_L=yes
-+ allow_undefined_flag=unsupported
-+ archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-+ old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-+ ;;
-+
-+ osf3*)
-+ if test "$GCC" = yes; then
-+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ allow_undefined_flag=' -expect_unresolved \*'
-+ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ fi
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator=:
-+ ;;
-+
-+ osf4* | osf5*) # as osf3* with the addition of -msym flag
-+ if test "$GCC" = yes; then
-+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-+ else
-+ allow_undefined_flag=' -expect_unresolved \*'
-+ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-+
-+ # Both c and cxx compiler support -rpath directly
-+ hardcode_libdir_flag_spec='-rpath $libdir'
-+ fi
-+ hardcode_libdir_separator=:
-+ ;;
-+
-+ solaris*)
-+ no_undefined_flag=' -z text'
-+ if test "$GCC" = yes; then
-+ wlarc='${wl}'
-+ archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-+ else
-+ wlarc=''
-+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-+ fi
-+ hardcode_libdir_flag_spec='-R$libdir'
-+ hardcode_shlibpath_var=no
-+ case $host_os in
-+ solaris2.[0-5] | solaris2.[0-5].*) ;;
-+ *)
-+ # The compiler driver will combine linker options so we
-+ # cannot just pass the convience library names through
-+ # without $wl, iff we do not link with $LD.
-+ # Luckily, gcc supports the same syntax we need for Sun Studio.
-+ # Supported since Solaris 2.6 (maybe 2.5.1?)
-+ case $wlarc in
-+ '')
-+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
-+ *)
-+ whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
-+ esac ;;
-+ esac
-+ link_all_deplibs=yes
-+ ;;
-+
-+ sunos4*)
-+ if test "x$host_vendor" = xsequent; then
-+ # Use $CC to link under sequent, because it throws in some extra .o
-+ # files that make .init and .fini sections work.
-+ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_direct=yes
-+ hardcode_minus_L=yes
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ sysv4)
-+ case $host_vendor in
-+ sni)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct=yes # is this really true???
-+ ;;
-+ siemens)
-+ ## LD is ld it makes a PLAMLIB
-+ ## CC just makes a GrossModule.
-+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+ reload_cmds='$CC -r -o $output$reload_objs'
-+ hardcode_direct=no
-+ ;;
-+ motorola)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-+ ;;
-+ esac
-+ runpath_var='LD_RUN_PATH'
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ sysv4.3*)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_shlibpath_var=no
-+ export_dynamic_flag_spec='-Bexport'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_shlibpath_var=no
-+ runpath_var=LD_RUN_PATH
-+ hardcode_runpath_var=yes
-+ ld_shlibs=yes
-+ fi
-+ ;;
-+
-+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
-+ no_undefined_flag='${wl}-z,text'
-+ archive_cmds_need_lc=no
-+ hardcode_shlibpath_var=no
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6*)
-+ # Note: We can NOT use -z defs as we might desire, because we do not
-+ # link with -lc, and that would cause any symbols used from libc to
-+ # always be unresolved, which means just about no library would
-+ # ever link correctly. If we're not using GNU ld we use -z text
-+ # though, which does catch some bad symbols but isn't as heavy-handed
-+ # as -z defs.
-+ no_undefined_flag='${wl}-z,text'
-+ allow_undefined_flag='${wl}-z,nodefs'
-+ archive_cmds_need_lc=no
-+ hardcode_shlibpath_var=no
-+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+ hardcode_libdir_separator=':'
-+ link_all_deplibs=yes
-+ export_dynamic_flag_spec='${wl}-Bexport'
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-+
-+ uts4*)
-+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec='-L$libdir'
-+ hardcode_shlibpath_var=no
-+ ;;
-+
-+ *)
-+ ld_shlibs=no
-+ ;;
-+ esac
-+ fi
-+
-+echo "$as_me:$LINENO: result: $ld_shlibs" >&5
-+echo "${ECHO_T}$ld_shlibs" >&6
-+test "$ld_shlibs" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$archive_cmds_need_lc" in
-+x|xyes)
-+ # Assume -lc should be added
-+ archive_cmds_need_lc=yes
-+
-+ if test "$enable_shared" = yes && test "$GCC" = yes; then
-+ case $archive_cmds in
-+ *'~'*)
-+ # FIXME: we may have to deal with multi-command sequences.
-+ ;;
-+ '$CC '*)
-+ # Test whether the compiler implicitly links with -lc since on some
-+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+ # to ld, don't add -lc before -lgcc.
-+ echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
-+ $rm conftest*
-+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } 2>conftest.err; then
-+ soname=conftest
-+ lib=conftest
-+ libobjs=conftest.$ac_objext
-+ deplibs=
-+ wl=$lt_prog_compiler_wl
-+ pic_flag=$lt_prog_compiler_pic
-+ compiler_flags=-v
-+ linker_flags=-v
-+ verstring=
-+ output_objdir=.
-+ libname=conftest
-+ lt_save_allow_undefined_flag=$allow_undefined_flag
-+ allow_undefined_flag=
-+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+ (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+ then
-+ archive_cmds_need_lc=no
-+ else
-+ archive_cmds_need_lc=yes
-+ fi
-+ allow_undefined_flag=$lt_save_allow_undefined_flag
-+ else
-+ cat conftest.err 1>&5
-+ fi
-+ $rm conftest*
-+ echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
-+echo "${ECHO_T}$archive_cmds_need_lc" >&6
-+ ;;
-+ esac
-+ fi
-+ ;;
-+esac
-+
-+echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+if test "$GCC" = yes; then
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-+ # if the path contains ";" then we assume it to be the separator
-+ # otherwise default to the standard path separator (i.e. ":") - it is
-+ # assumed that no part of a normal pathname contains ";" but that should
-+ # okay in the real world where ";" in dirpaths is itself problematic.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+else
-+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-+fi
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+ shlibpath_var=LIBPATH
-+
-+ # AIX 3 has no versioning support, so we append a major version to the name.
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+
-+aix4* | aix5*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ hardcode_into_libs=yes
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 supports IA64
-+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ else
-+ # With GCC up to 2.95.x, collect2 would create an import file
-+ # for dependence libraries. The import file would start with
-+ # the line `#! .'. This would cause the generated library to
-+ # depend on `.', always an invalid library. This was fixed in
-+ # development snapshots of GCC prior to 3.0.
-+ case $host_os in
-+ aix4 | aix4.[01] | aix4.[01].*)
-+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+ echo ' yes '
-+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+ :
-+ else
-+ can_build_shared=no
-+ fi
-+ ;;
-+ esac
-+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+ # soname into executable. Probably we can add versioning support to
-+ # collect2, so additional links can be useful in future.
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+ # instead of lib<name>.a to let people know that these are not
-+ # typical AIX shared libraries.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ else
-+ # We preserve .a as extension for shared libraries through AIX4.2
-+ # and later when we are not doing run time linking.
-+ library_names_spec='${libname}${release}.a $libname.a'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ fi
-+ shlibpath_var=LIBPATH
-+ fi
-+ ;;
-+
-+amigaos*)
-+ library_names_spec='$libname.ixlibrary $libname.a'
-+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+ ;;
-+
-+beos*)
-+ library_names_spec='${libname}${shared_ext}'
-+ dynamic_linker="$host_os ld.so"
-+ shlibpath_var=LIBRARY_PATH
-+ ;;
-+
-+bsdi[45]*)
-+ version_type=linux
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+ # the default ld.so.conf also contains /usr/contrib/lib and
-+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+ # libtool to hard-code these into programs
-+ ;;
-+
-+cygwin* | mingw* | pw32*)
-+ version_type=windows
-+ shrext_cmds=".dll"
-+ need_version=no
-+ need_lib_prefix=no
-+
-+ case $GCC,$host_os in
-+ yes,cygwin* | yes,mingw* | yes,pw32*)
-+ library_names_spec='$libname.dll.a'
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname~
-+ chmod a+x \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $rm \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+
-+ case $host_os in
-+ cygwin*)
-+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+ ;;
-+ mingw*)
-+ # MinGW DLLs use traditional 'lib' prefix
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-+ # It is most probably a Windows format PATH printed by
-+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+ # path with ; separators, and with drive letters. We can handle the
-+ # drive letters (cygwin fileutils understands them), so leave them,
-+ # especially as we might pass files found there to a mingw objdump,
-+ # which wouldn't understand a cygwinified path. Ahh.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ ;;
-+ pw32*)
-+ # pw32 DLLs use 'pw' prefix rather than 'lib'
-+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ ;;
-+ esac
-+ dynamic_linker='Win32 ld.exe'
-+ # FIXME: first we should search . and the directory the executable is in
-+ shlibpath_var=PATH
-+ ;;
-+
-+darwin* | rhapsody*)
-+ dynamic_linker="$host_os dyld"
-+ version_type=darwin
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+ soname_spec='${libname}${release}${major}$shared_ext'
-+ shlibpath_overrides_runpath=yes
-+ shlibpath_var=DYLD_LIBRARY_PATH
-+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-+ if test "$GCC" = yes; then
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-+ else
-+ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
-+ fi
-+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+ ;;
-+
-+dgux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+freebsd1*)
-+ dynamic_linker=no
-+ ;;
-+
-+kfreebsd*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='GNU ld.so'
-+ ;;
-+
-+freebsd* | dragonfly*)
-+ # DragonFly does not have aout. When/if they implement a new
-+ # versioning mechanism, adjust this.
-+ if test -x /usr/bin/objformat; then
-+ objformat=`/usr/bin/objformat`
-+ else
-+ case $host_os in
-+ freebsd[123]*) objformat=aout ;;
-+ *) objformat=elf ;;
-+ esac
-+ fi
-+ version_type=freebsd-$objformat
-+ case $version_type in
-+ freebsd-elf*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ need_version=no
-+ need_lib_prefix=no
-+ ;;
-+ freebsd-*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+ need_version=yes
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_os in
-+ freebsd2*)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ freebsd3.[01]* | freebsdelf3.[01]*)
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+ freebsd*) # from 4.6 on
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ esac
-+ ;;
-+
-+gnu*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+ # Give a soname corresponding to the major version so that dld.sl refuses to
-+ # link against other versions.
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ case $host_cpu in
-+ ia64*)
-+ shrext_cmds='.so'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.so"
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ if test "X$HPUX_IA64_MODE" = X32; then
-+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+ else
-+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+ fi
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ hppa*64*)
-+ shrext_cmds='.sl'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ *)
-+ shrext_cmds='.sl'
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=SHLIB_PATH
-+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+ esac
-+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+ postinstall_cmds='chmod 555 $lib'
-+ ;;
-+
-+interix3*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $host_os in
-+ nonstopux*) version_type=nonstopux ;;
-+ *)
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ version_type=linux
-+ else
-+ version_type=irix
-+ fi ;;
-+ esac
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ case $host_os in
-+ irix5* | nonstopux*)
-+ libsuff= shlibsuff=
-+ ;;
-+ *)
-+ case $LD in # libtool.m4 will add one of these switches to LD
-+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+ libsuff= shlibsuff= libmagic=32-bit;;
-+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+ libsuff=32 shlibsuff=N32 libmagic=N32;;
-+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+ *) libsuff= shlibsuff= libmagic=never-match;;
-+ esac
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+ hardcode_into_libs=yes
-+ ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+ dynamic_linker=no
-+ ;;
-+
-+# This must be Linux ELF.
-+linux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ # This implies no fast_install, which is unacceptable.
-+ # Some rework will be needed to allow for fast_install
-+ # before this can be enabled.
-+ hardcode_into_libs=yes
-+
-+ # Append ld.so.conf contents to the search path
-+ if test -f /etc/ld.so.conf; then
-+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+ fi
-+
-+ # We used to test for /lib/ld.so.1 and disable shared libraries on
-+ # powerpc, because MkLinux only supported shared libraries with the
-+ # GNU dynamic linker. Since this was broken with cross compilers,
-+ # most powerpc-linux boxes support dynamic linking these days and
-+ # people can always --disable-shared, the test was removed, and we
-+ # assume the GNU/Linux dynamic linker is in use.
-+ dynamic_linker='GNU/Linux ld.so'
-+ ;;
-+
-+netbsdelf*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='NetBSD ld.elf_so'
-+ ;;
-+
-+knetbsd*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='GNU ld.so'
-+ ;;
-+
-+netbsd*)
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ dynamic_linker='NetBSD (a.out) ld.so'
-+ else
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='NetBSD ld.elf_so'
-+ fi
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+
-+newsos6)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+nto-qnx*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+openbsd*)
-+ version_type=sunos
-+ sys_lib_dlsearch_path_spec="/usr/lib"
-+ need_lib_prefix=no
-+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+ case $host_os in
-+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+ *) need_version=no ;;
-+ esac
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ case $host_os in
-+ openbsd2.[89] | openbsd2.[89].*)
-+ shlibpath_overrides_runpath=no
-+ ;;
-+ *)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ esac
-+ else
-+ shlibpath_overrides_runpath=yes
-+ fi
-+ ;;
-+
-+os2*)
-+ libname_spec='$name'
-+ shrext_cmds=".dll"
-+ need_lib_prefix=no
-+ library_names_spec='$libname${shared_ext} $libname.a'
-+ dynamic_linker='OS/2 ld.exe'
-+ shlibpath_var=LIBPATH
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ version_type=osf
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+ ;;
-+
-+solaris*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ # ldd complains unless libraries are executable
-+ postinstall_cmds='chmod +x $lib'
-+ ;;
-+
-+sunos4*)
-+ version_type=sunos
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ if test "$with_gnu_ld" = yes; then
-+ need_lib_prefix=no
-+ fi
-+ need_version=yes
-+ ;;
-+
-+sysv4 | sysv4.3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_vendor in
-+ sni)
-+ shlibpath_overrides_runpath=no
-+ need_lib_prefix=no
-+ export_dynamic_flag_spec='${wl}-Blargedynsym'
-+ runpath_var=LD_RUN_PATH
-+ ;;
-+ siemens)
-+ need_lib_prefix=no
-+ ;;
-+ motorola)
-+ need_lib_prefix=no
-+ need_version=no
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+ ;;
-+ esac
-+ ;;
-+
-+sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ version_type=linux
-+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+ soname_spec='$libname${shared_ext}.$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ fi
-+ ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+ version_type=freebsd-elf
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ if test "$with_gnu_ld" = yes; then
-+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+ shlibpath_overrides_runpath=no
-+ else
-+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+ shlibpath_overrides_runpath=yes
-+ case $host_os in
-+ sco3.2v5*)
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+ ;;
-+ esac
-+ fi
-+ sys_lib_dlsearch_path_spec='/usr/lib'
-+ ;;
-+
-+uts4*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+*)
-+ dynamic_linker=no
-+ ;;
-+esac
-+echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
-+hardcode_action=
-+if test -n "$hardcode_libdir_flag_spec" || \
-+ test -n "$runpath_var" || \
-+ test "X$hardcode_automatic" = "Xyes" ; then
-+
-+ # We can hardcode non-existant directories.
-+ if test "$hardcode_direct" != no &&
-+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+ # have to relink, otherwise we might link with an installed library
-+ # when we should be linking with a yet-to-be-installed one
-+ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
-+ test "$hardcode_minus_L" != no; then
-+ # Linking always hardcodes the temporary library directory.
-+ hardcode_action=relink
-+ else
-+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+ hardcode_action=immediate
-+ fi
-+else
-+ # We cannot hardcode anything, or else we can only hardcode existing
-+ # directories.
-+ hardcode_action=unsupported
-+fi
-+echo "$as_me:$LINENO: result: $hardcode_action" >&5
-+echo "${ECHO_T}$hardcode_action" >&6
-+
-+if test "$hardcode_action" = relink; then
-+ # Fast installation is not supported
-+ enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+ test "$enable_shared" = no; then
-+ # Fast installation is not necessary
-+ enable_fast_install=needless
-+fi
-+
-+striplib=
-+old_striplib=
-+echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
-+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
-+else
-+# FIXME - insert some real tests, host_os isn't really good enough
-+ case $host_os in
-+ darwin*)
-+ if test -n "$STRIP" ; then
-+ striplib="$STRIP -x"
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
-+ else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+ ;;
-+ *)
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+ ;;
-+ esac
-+fi
-+
-+if test "x$enable_dlopen" != xyes; then
-+ enable_dlopen=unknown
-+ enable_dlopen_self=unknown
-+ enable_dlopen_self_static=unknown
-+else
-+ lt_cv_dlopen=no
-+ lt_cv_dlopen_libs=
-+
-+ case $host_os in
-+ beos*)
-+ lt_cv_dlopen="load_add_on"
-+ lt_cv_dlopen_libs=
-+ lt_cv_dlopen_self=yes
-+ ;;
-+
-+ mingw* | pw32*)
-+ lt_cv_dlopen="LoadLibrary"
-+ lt_cv_dlopen_libs=
-+ ;;
-+
-+ cygwin*)
-+ lt_cv_dlopen="dlopen"
-+ lt_cv_dlopen_libs=
-+ ;;
-+
-+ darwin*)
-+ # if libdl is installed we need to link against it
-+ echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
-+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldl $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char dlopen ();
-+int
-+main ()
-+{
-+dlopen ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_dl_dlopen=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_dl_dlopen=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
-+if test $ac_cv_lib_dl_dlopen = yes; then
-+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-+else
-+
-+ lt_cv_dlopen="dyld"
-+ lt_cv_dlopen_libs=
-+ lt_cv_dlopen_self=yes
-+
-+fi
-+
-+ ;;
-+
-+ *)
-+ echo "$as_me:$LINENO: checking for shl_load" >&5
-+echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
-+if test "${ac_cv_func_shl_load+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define shl_load innocuous_shl_load
-+
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char shl_load (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+
-+#undef shl_load
-+
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char shl_load ();
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined (__stub_shl_load) || defined (__stub___shl_load)
-+choke me
-+#else
-+char (*f) () = shl_load;
-+#endif
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+int
-+main ()
-+{
-+return f != shl_load;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_shl_load=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_func_shl_load=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-+echo "${ECHO_T}$ac_cv_func_shl_load" >&6
-+if test $ac_cv_func_shl_load = yes; then
-+ lt_cv_dlopen="shl_load"
-+else
-+ echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-+echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
-+if test "${ac_cv_lib_dld_shl_load+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldld $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char shl_load ();
-+int
-+main ()
-+{
-+shl_load ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_dld_shl_load=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_dld_shl_load=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-+echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
-+if test $ac_cv_lib_dld_shl_load = yes; then
-+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
-+else
-+ echo "$as_me:$LINENO: checking for dlopen" >&5
-+echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
-+if test "${ac_cv_func_dlopen+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define dlopen innocuous_dlopen
-+
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char dlopen (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+
-+#undef dlopen
-+
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char dlopen ();
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined (__stub_dlopen) || defined (__stub___dlopen)
-+choke me
-+#else
-+char (*f) () = dlopen;
-+#endif
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+int
-+main ()
-+{
-+return f != dlopen;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_dlopen=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_func_dlopen=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_func_dlopen" >&6
-+if test $ac_cv_func_dlopen = yes; then
-+ lt_cv_dlopen="dlopen"
-+else
-+ echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
-+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldl $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char dlopen ();
-+int
-+main ()
-+{
-+dlopen ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_dl_dlopen=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_dl_dlopen=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
-+if test $ac_cv_lib_dl_dlopen = yes; then
-+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-+else
-+ echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-+echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
-+if test "${ac_cv_lib_svld_dlopen+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-lsvld $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char dlopen ();
-+int
-+main ()
-+{
-+dlopen ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_svld_dlopen=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_svld_dlopen=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-+echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
-+if test $ac_cv_lib_svld_dlopen = yes; then
-+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-+else
-+ echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-+echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
-+if test "${ac_cv_lib_dld_dld_link+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldld $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char dld_link ();
-+int
-+main ()
-+{
-+dld_link ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_dld_dld_link=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_dld_dld_link=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-+echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
-+if test $ac_cv_lib_dld_dld_link = yes; then
-+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
-+fi
-+
-+
-+fi
-+
-+
-+fi
-+
-+
-+fi
-+
-+
-+fi
-+
-+
-+fi
-+
-+ ;;
-+ esac
-+
-+ if test "x$lt_cv_dlopen" != xno; then
-+ enable_dlopen=yes
-+ else
-+ enable_dlopen=no
-+ fi
-+
-+ case $lt_cv_dlopen in
-+ dlopen)
-+ save_CPPFLAGS="$CPPFLAGS"
-+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-+
-+ save_LDFLAGS="$LDFLAGS"
-+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-+
-+ save_LIBS="$LIBS"
-+ LIBS="$lt_cv_dlopen_libs $LIBS"
-+
-+ echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-+echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
-+if test "${lt_cv_dlopen_self+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "$cross_compiling" = yes; then :
-+ lt_cv_dlopen_self=cross
-+else
-+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-+ lt_status=$lt_dlunknown
-+ cat > conftest.$ac_ext <<EOF
-+#line 8700 "configure"
-+#include "confdefs.h"
-+
-+#if HAVE_DLFCN_H
-+#include <dlfcn.h>
-+#endif
-+
-+#include <stdio.h>
-+
-+#ifdef RTLD_GLOBAL
-+# define LT_DLGLOBAL RTLD_GLOBAL
-+#else
-+# ifdef DL_GLOBAL
-+# define LT_DLGLOBAL DL_GLOBAL
-+# else
-+# define LT_DLGLOBAL 0
-+# endif
-+#endif
-+
-+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-+ find out it does not work in some platform. */
-+#ifndef LT_DLLAZY_OR_NOW
-+# ifdef RTLD_LAZY
-+# define LT_DLLAZY_OR_NOW RTLD_LAZY
-+# else
-+# ifdef DL_LAZY
-+# define LT_DLLAZY_OR_NOW DL_LAZY
-+# else
-+# ifdef RTLD_NOW
-+# define LT_DLLAZY_OR_NOW RTLD_NOW
-+# else
-+# ifdef DL_NOW
-+# define LT_DLLAZY_OR_NOW DL_NOW
-+# else
-+# define LT_DLLAZY_OR_NOW 0
-+# endif
-+# endif
-+# endif
-+# endif
-+#endif
-+
-+#ifdef __cplusplus
-+extern "C" void exit (int);
-+#endif
-+
-+void fnord() { int i=42;}
-+int main ()
-+{
-+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-+ int status = $lt_dlunknown;
-+
-+ if (self)
-+ {
-+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
-+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-+ /* dlclose (self); */
-+ }
-+ else
-+ puts (dlerror ());
-+
-+ exit (status);
-+}
-+EOF
-+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-+ (./conftest; exit; ) >&5 2>/dev/null
-+ lt_status=$?
-+ case x$lt_status in
-+ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-+ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-+ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
-+ esac
-+ else :
-+ # compilation failed
-+ lt_cv_dlopen_self=no
-+ fi
-+fi
-+rm -fr conftest*
-+
-+
-+fi
-+echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-+echo "${ECHO_T}$lt_cv_dlopen_self" >&6
-+
-+ if test "x$lt_cv_dlopen_self" = xyes; then
-+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-+ echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-+echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
-+if test "${lt_cv_dlopen_self_static+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "$cross_compiling" = yes; then :
-+ lt_cv_dlopen_self_static=cross
-+else
-+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-+ lt_status=$lt_dlunknown
-+ cat > conftest.$ac_ext <<EOF
-+#line 8800 "configure"
-+#include "confdefs.h"
-+
-+#if HAVE_DLFCN_H
-+#include <dlfcn.h>
-+#endif
-+
-+#include <stdio.h>
-+
-+#ifdef RTLD_GLOBAL
-+# define LT_DLGLOBAL RTLD_GLOBAL
-+#else
-+# ifdef DL_GLOBAL
-+# define LT_DLGLOBAL DL_GLOBAL
-+# else
-+# define LT_DLGLOBAL 0
-+# endif
-+#endif
-+
-+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-+ find out it does not work in some platform. */
-+#ifndef LT_DLLAZY_OR_NOW
-+# ifdef RTLD_LAZY
-+# define LT_DLLAZY_OR_NOW RTLD_LAZY
-+# else
-+# ifdef DL_LAZY
-+# define LT_DLLAZY_OR_NOW DL_LAZY
-+# else
-+# ifdef RTLD_NOW
-+# define LT_DLLAZY_OR_NOW RTLD_NOW
-+# else
-+# ifdef DL_NOW
-+# define LT_DLLAZY_OR_NOW DL_NOW
-+# else
-+# define LT_DLLAZY_OR_NOW 0
-+# endif
-+# endif
-+# endif
-+# endif
-+#endif
-+
-+#ifdef __cplusplus
-+extern "C" void exit (int);
-+#endif
-+
-+void fnord() { int i=42;}
-+int main ()
-+{
-+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-+ int status = $lt_dlunknown;
-+
-+ if (self)
-+ {
-+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
-+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-+ /* dlclose (self); */
-+ }
-+ else
-+ puts (dlerror ());
-+
-+ exit (status);
-+}
-+EOF
-+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-+ (./conftest; exit; ) >&5 2>/dev/null
-+ lt_status=$?
-+ case x$lt_status in
-+ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-+ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-+ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
-+ esac
-+ else :
-+ # compilation failed
-+ lt_cv_dlopen_self_static=no
-+ fi
-+fi
-+rm -fr conftest*
-+
-+
-+fi
-+echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-+echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
-+ fi
-+
-+ CPPFLAGS="$save_CPPFLAGS"
-+ LDFLAGS="$save_LDFLAGS"
-+ LIBS="$save_LIBS"
-+ ;;
-+ esac
-+
-+ case $lt_cv_dlopen_self in
-+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-+ *) enable_dlopen_self=unknown ;;
-+ esac
-+
-+ case $lt_cv_dlopen_self_static in
-+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-+ *) enable_dlopen_self_static=unknown ;;
-+ esac
-+fi
-+
-+
-+# Report which library types will actually be built
-+echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
-+echo "$as_me:$LINENO: result: $can_build_shared" >&5
-+echo "${ECHO_T}$can_build_shared" >&6
-+
-+echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
-+test "$can_build_shared" = "no" && enable_shared=no
-+
-+# On AIX, shared libraries and static libraries use the same namespace, and
-+# are all built from PIC.
-+case $host_os in
-+aix3*)
-+ test "$enable_shared" = yes && enable_static=no
-+ if test -n "$RANLIB"; then
-+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
-+ postinstall_cmds='$RANLIB $lib'
-+ fi
-+ ;;
-+
-+aix4* | aix5*)
-+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-+ test "$enable_shared" = yes && enable_static=no
-+ fi
-+ ;;
-+esac
-+echo "$as_me:$LINENO: result: $enable_shared" >&5
-+echo "${ECHO_T}$enable_shared" >&6
-+
-+echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
-+# Make sure either enable_shared or enable_static is yes.
-+test "$enable_shared" = yes || enable_static=yes
-+echo "$as_me:$LINENO: result: $enable_static" >&5
-+echo "${ECHO_T}$enable_static" >&6
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+ # See if we are running on zsh, and set the options which allow our commands through
-+ # without removal of \ escapes.
-+ if test -n "${ZSH_VERSION+set}" ; then
-+ setopt NO_GLOB_SUBST
-+ fi
-+ # Now quote all the things that may contain metacharacters while being
-+ # careful not to overquote the AC_SUBSTed values. We take copies of the
-+ # variables and quote the copies for generation of the libtool script.
-+ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+ SED SHELL STRIP \
-+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+ deplibs_check_method reload_flag reload_cmds need_locks \
-+ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+ lt_cv_sys_global_symbol_to_c_name_address \
-+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+ old_postinstall_cmds old_postuninstall_cmds \
-+ compiler \
-+ CC \
-+ LD \
-+ lt_prog_compiler_wl \
-+ lt_prog_compiler_pic \
-+ lt_prog_compiler_static \
-+ lt_prog_compiler_no_builtin_flag \
-+ export_dynamic_flag_spec \
-+ thread_safe_flag_spec \
-+ whole_archive_flag_spec \
-+ enable_shared_with_static_runtimes \
-+ old_archive_cmds \
-+ old_archive_from_new_cmds \
-+ predep_objects \
-+ postdep_objects \
-+ predeps \
-+ postdeps \
-+ compiler_lib_search_path \
-+ archive_cmds \
-+ archive_expsym_cmds \
-+ postinstall_cmds \
-+ postuninstall_cmds \
-+ old_archive_from_expsyms_cmds \
-+ allow_undefined_flag \
-+ no_undefined_flag \
-+ export_symbols_cmds \
-+ hardcode_libdir_flag_spec \
-+ hardcode_libdir_flag_spec_ld \
-+ hardcode_libdir_separator \
-+ hardcode_automatic \
-+ module_cmds \
-+ module_expsym_cmds \
-+ lt_cv_prog_compiler_c_o \
-+ exclude_expsyms \
-+ include_expsyms; do
-+
-+ case $var in
-+ old_archive_cmds | \
-+ old_archive_from_new_cmds | \
-+ archive_cmds | \
-+ archive_expsym_cmds | \
-+ module_cmds | \
-+ module_expsym_cmds | \
-+ old_archive_from_expsyms_cmds | \
-+ export_symbols_cmds | \
-+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+ postinstall_cmds | postuninstall_cmds | \
-+ old_postinstall_cmds | old_postuninstall_cmds | \
-+ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+ # Double-quote double-evaled strings.
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+ ;;
-+ *)
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+ ;;
-+ esac
-+ done
-+
-+ case $lt_echo in
-+ *'\$0 --fallback-echo"')
-+ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+ ;;
-+ esac
-+
-+cfgfile="${ofile}T"
-+ trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-+ $rm -f "$cfgfile"
-+ { echo "$as_me:$LINENO: creating $ofile" >&5
-+echo "$as_me: creating $ofile" >&6;}
-+
-+ cat <<__EOF__ >> "$cfgfile"
-+#! $SHELL
-+
-+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-+#
-+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-+# Free Software Foundation, Inc.
-+#
-+# This file is part of GNU Libtool:
-+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-+#
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+# General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-+#
-+# As a special exception to the GNU General Public License, if you
-+# distribute this file as part of a program that contains a
-+# configuration script generated by Autoconf, you may include it under
-+# the same distribution terms that you use for the rest of that program.
-+
-+# A sed program that does not truncate output.
-+SED=$lt_SED
-+
-+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-+Xsed="$SED -e 1s/^X//"
-+
-+# The HP-UX ksh and POSIX shell print the target directory to stdout
-+# if CDPATH is set.
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-+
-+# The names of the tagged configurations supported by this script.
-+available_tags=
-+
-+# ### BEGIN LIBTOOL CONFIG
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names. First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds
-+archive_expsym_cmds=$lt_archive_expsym_cmds
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds
-+module_expsym_cmds=$lt_module_expsym_cmds
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path="$fix_srcfile_path"
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms
-+
-+# ### END LIBTOOL CONFIG
-+
-+__EOF__
-+
-+
-+ case $host_os in
-+ aix3*)
-+ cat <<\EOF >> "$cfgfile"
-+
-+# AIX sometimes has problems with the GCC collect2 program. For some
-+# reason, if we set the COLLECT_NAMES environment variable, the problems
-+# vanish in a puff of smoke.
-+if test "X${COLLECT_NAMES+set}" != Xset; then
-+ COLLECT_NAMES=
-+ export COLLECT_NAMES
-+fi
-+EOF
-+ ;;
-+ esac
-+
-+ # We use sed instead of cat because bash on DJGPP gets confused if
-+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
-+ # text mode, it properly converts lines to CR/LF. This bash problem
-+ # is reportedly fixed, but why not run on old versions too?
-+ sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-+
-+ mv -f "$cfgfile" "$ofile" || \
-+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-+ chmod +x "$ofile"
-+
-+else
-+ # If there is no Makefile yet, we rely on a make rule to execute
-+ # `config.status --recheck' to rerun these tests and create the
-+ # libtool script then.
-+ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+ if test -f "$ltmain_in"; then
-+ test -f Makefile && make "$ltmain"
-+ fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC="$lt_save_CC"
-+
-+
-+# Check whether --with-tags or --without-tags was given.
-+if test "${with_tags+set}" = set; then
-+ withval="$with_tags"
-+ tagnames="$withval"
-+fi;
-+
-+if test -f "$ltmain" && test -n "$tagnames"; then
-+ if test ! -f "${ofile}"; then
-+ { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
-+echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
-+ fi
-+
-+ if test -z "$LTCC"; then
-+ eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-+ if test -z "$LTCC"; then
-+ { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
-+echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
-+ else
-+ { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
-+echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
-+ fi
-+ fi
-+ if test -z "$LTCFLAGS"; then
-+ eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
-+ fi
-+
-+ # Extract list of available tagged configurations in $ofile.
-+ # Note that this assumes the entire list is on one line.
-+ available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-+
-+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-+ for tagname in $tagnames; do
-+ IFS="$lt_save_ifs"
-+ # Check whether tagname contains only valid characters
-+ case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
-+ "") ;;
-+ *) { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
-+echo "$as_me: error: invalid tag name: $tagname" >&2;}
-+ { (exit 1); exit 1; }; }
-+ ;;
-+ esac
-+
-+ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-+ then
-+ { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
-+echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi
-+
-+ # Update the list of available tags.
-+ if test -n "$tagname"; then
-+ echo appending configuration tag \"$tagname\" to $ofile
-+
-+ case $tagname in
-+ CXX)
-+ if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-+ (test "X$CXX" != "Xg++"))) ; then
-+ ac_ext=cc
-+ac_cpp='$CXXCPP $CPPFLAGS'
-+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-+
-+
-+
-+
-+archive_cmds_need_lc_CXX=no
-+allow_undefined_flag_CXX=
-+always_export_symbols_CXX=no
-+archive_expsym_cmds_CXX=
-+export_dynamic_flag_spec_CXX=
-+hardcode_direct_CXX=no
-+hardcode_libdir_flag_spec_CXX=
-+hardcode_libdir_flag_spec_ld_CXX=
-+hardcode_libdir_separator_CXX=
-+hardcode_minus_L_CXX=no
-+hardcode_shlibpath_var_CXX=unsupported
-+hardcode_automatic_CXX=no
-+module_cmds_CXX=
-+module_expsym_cmds_CXX=
-+link_all_deplibs_CXX=unknown
-+old_archive_cmds_CXX=$old_archive_cmds
-+no_undefined_flag_CXX=
-+whole_archive_flag_spec_CXX=
-+enable_shared_with_static_runtimes_CXX=no
-+
-+# Dependencies to place before and after the object being linked:
-+predep_objects_CXX=
-+postdep_objects_CXX=
-+predeps_CXX=
-+postdeps_CXX=
-+compiler_lib_search_path_CXX=
-+
-+# Source file extension for C++ test sources.
-+ac_ext=cpp
-+
-+# Object file extension for compiled C++ test sources.
-+objext=o
-+objext_CXX=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="int some_variable = 0;\n"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+printf "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC=$CC
-+lt_save_LD=$LD
-+lt_save_GCC=$GCC
-+GCC=$GXX
-+lt_save_with_gnu_ld=$with_gnu_ld
-+lt_save_path_LD=$lt_cv_path_LD
-+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-+else
-+ $as_unset lt_cv_prog_gnu_ld
-+fi
-+if test -n "${lt_cv_path_LDCXX+set}"; then
-+ lt_cv_path_LD=$lt_cv_path_LDCXX
-+else
-+ $as_unset lt_cv_path_LD
-+fi
-+test -z "${LDCXX+set}" || LD=$LDCXX
-+CC=${CXX-"c++"}
-+compiler=$CC
-+compiler_CXX=$CC
-+for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+
-+# We don't want -fno-exception wen compiling C++ code, so set the
-+# no_builtin_flag separately
-+if test "$GXX" = yes; then
-+ lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
-+else
-+ lt_prog_compiler_no_builtin_flag_CXX=
-+fi
-+
-+if test "$GXX" = yes; then
-+ # Set up default GNU C++ configuration
-+
-+
-+# Check whether --with-gnu-ld or --without-gnu-ld was given.
-+if test "${with_gnu_ld+set}" = set; then
-+ withval="$with_gnu_ld"
-+ test "$withval" = no || with_gnu_ld=yes
-+else
-+ with_gnu_ld=no
-+fi;
-+ac_prog=ld
-+if test "$GCC" = yes; then
-+ # Check if gcc -print-prog-name=ld gives a path.
-+ echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6
-+ case $host in
-+ *-*-mingw*)
-+ # gcc leaves a trailing carriage return which upsets mingw
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-+ *)
-+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-+ esac
-+ case $ac_prog in
-+ # Accept absolute paths.
-+ [\\/]* | ?:[\\/]*)
-+ re_direlt='/[^/][^/]*/\.\./'
-+ # Canonicalize the pathname of ld
-+ ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-+ ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-+ done
-+ test -z "$LD" && LD="$ac_prog"
-+ ;;
-+ "")
-+ # If it fails, then pretend we aren't using GCC.
-+ ac_prog=ld
-+ ;;
-+ *)
-+ # If it is relative, then search for the first ld in PATH.
-+ with_gnu_ld=unknown
-+ ;;
-+ esac
-+elif test "$with_gnu_ld" = yes; then
-+ echo "$as_me:$LINENO: checking for GNU ld" >&5
-+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
-+else
-+ echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
-+fi
-+if test "${lt_cv_path_LD+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -z "$LD"; then
-+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-+ for ac_dir in $PATH; do
-+ IFS="$lt_save_ifs"
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-+ lt_cv_path_LD="$ac_dir/$ac_prog"
-+ # Check to see if the program is GNU ld. I'd rather use --version,
-+ # but apparently some variants of GNU ld only accept -v.
-+ # Break only if it was the GNU/non-GNU ld that we prefer.
-+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-+ *GNU* | *'with BFD'*)
-+ test "$with_gnu_ld" != no && break
-+ ;;
-+ *)
-+ test "$with_gnu_ld" != yes && break
-+ ;;
-+ esac
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+else
-+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
-+fi
-+fi
-+
-+LD="$lt_cv_path_LD"
-+if test -n "$LD"; then
-+ echo "$as_me:$LINENO: result: $LD" >&5
-+echo "${ECHO_T}$LD" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-+ { (exit 1); exit 1; }; }
-+echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
-+if test "${lt_cv_prog_gnu_ld+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
-+case `$LD -v 2>&1 </dev/null` in
-+*GNU* | *'with BFD'*)
-+ lt_cv_prog_gnu_ld=yes
-+ ;;
-+*)
-+ lt_cv_prog_gnu_ld=no
-+ ;;
-+esac
-+fi
-+echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
-+with_gnu_ld=$lt_cv_prog_gnu_ld
-+
-+
-+
-+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
-+ # archiving commands below assume that GNU ld is being used.
-+ if test "$with_gnu_ld" = yes; then
-+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-+
-+ # If archive_cmds runs LD, not CC, wlarc should be empty
-+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-+ # investigate it a little bit more. (MM)
-+ wlarc='${wl}'
-+
-+ # ancient GNU ld didn't support --whole-archive et. al.
-+ if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-+ grep 'no-whole-archive' > /dev/null; then
-+ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ else
-+ whole_archive_flag_spec_CXX=
-+ fi
-+ else
-+ with_gnu_ld=no
-+ wlarc=
-+
-+ # A generic and very simple default shared library creation
-+ # command for GNU C++ for the case where it uses the native
-+ # linker, instead of GNU ld. If possible, this setting should
-+ # overridden to take advantage of the native linker features on
-+ # the platform it is being used on.
-+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-+ fi
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+else
-+ GXX=no
-+ with_gnu_ld=no
-+ wlarc=
-+fi
-+
-+# PORTME: fill in a description of your system's C++ link characteristics
-+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
-+ld_shlibs_CXX=yes
-+case $host_os in
-+ aix3*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ aix4* | aix5*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ exp_sym_flag='-Bexport'
-+ no_entry_flag=""
-+ else
-+ aix_use_runtimelinking=no
-+
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-+ for ld_flag in $LDFLAGS; do
-+ case $ld_flag in
-+ *-brtl*)
-+ aix_use_runtimelinking=yes
-+ break
-+ ;;
-+ esac
-+ done
-+ ;;
-+ esac
-+
-+ exp_sym_flag='-bexport'
-+ no_entry_flag='-bnoentry'
-+ fi
-+
-+ # When large executables or shared objects are built, AIX ld can
-+ # have problems creating the table of contents. If linking a library
-+ # or program results in "error TOC overflow" add -mminimal-toc to
-+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+ archive_cmds_CXX=''
-+ hardcode_direct_CXX=yes
-+ hardcode_libdir_separator_CXX=':'
-+ link_all_deplibs_CXX=yes
-+
-+ if test "$GXX" = yes; then
-+ case $host_os in aix4.[012]|aix4.[012].*)
-+ # We only want to do this on AIX 4.2 and lower, the check
-+ # below for broken collect2 doesn't work under 4.3+
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ hardcode_direct_CXX=yes
-+ else
-+ # We have old collect2
-+ hardcode_direct_CXX=unsupported
-+ # It fails to find uninstalled libraries when the uninstalled
-+ # path is not listed in the libpath. Setting hardcode_minus_L
-+ # to unsupported forces relinking
-+ hardcode_minus_L_CXX=yes
-+ hardcode_libdir_flag_spec_CXX='-L$libdir'
-+ hardcode_libdir_separator_CXX=
-+ fi
-+ ;;
-+ esac
-+ shared_flag='-shared'
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag="$shared_flag "'${wl}-G'
-+ fi
-+ else
-+ # not using gcc
-+ if test "$host_cpu" = ia64; then
-+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+ # chokes on -Wl,-G. The following line is correct:
-+ shared_flag='-G'
-+ else
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag='${wl}-G'
-+ else
-+ shared_flag='${wl}-bM:SRE'
-+ fi
-+ fi
-+ fi
-+
-+ # It seems that -bexpall does not export symbols beginning with
-+ # underscore (_), so it is better to generate a list of symbols to export.
-+ always_export_symbols_CXX=yes
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # Warning - without using the other runtime loading flags (-brtl),
-+ # -berok will link without error, but may produce a broken library.
-+ allow_undefined_flag_CXX='-berok'
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`; fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-+
-+ archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+ else
-+ if test "$host_cpu" = ia64; then
-+ hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
-+ allow_undefined_flag_CXX="-z nodefs"
-+ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+ else
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`; fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ # Warning - without using the other run time loading flags,
-+ # -berok will link without error, but may produce a broken library.
-+ no_undefined_flag_CXX=' ${wl}-bernotok'
-+ allow_undefined_flag_CXX=' ${wl}-berok'
-+ # Exported symbols can be pulled into shared objects from archives
-+ whole_archive_flag_spec_CXX='$convenience'
-+ archive_cmds_need_lc_CXX=yes
-+ # This is similar to how AIX traditionally builds its shared libraries.
-+ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+ fi
-+ fi
-+ ;;
-+
-+ beos*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ allow_undefined_flag_CXX=unsupported
-+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-+ # support --undefined. This deserves some investigation. FIXME
-+ archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ else
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+
-+ chorus*)
-+ case $cc_basename in
-+ *)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ esac
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
-+ # as there is no search path for DLLs.
-+ hardcode_libdir_flag_spec_CXX='-L$libdir'
-+ allow_undefined_flag_CXX=unsupported
-+ always_export_symbols_CXX=no
-+ enable_shared_with_static_runtimes_CXX=yes
-+
-+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ # If the export-symbols file already is a .def file (1st line
-+ # is EXPORTS), use it as is; otherwise, prepend...
-+ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname.def;
-+ else
-+ echo EXPORTS > $output_objdir/$soname.def;
-+ cat $export_symbols >> $output_objdir/$soname.def;
-+ fi~
-+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ else
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+ darwin* | rhapsody*)
-+ case $host_os in
-+ rhapsody* | darwin1.[012])
-+ allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress'
-+ ;;
-+ *) # Darwin 1.3 on
-+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+ allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ else
-+ case ${MACOSX_DEPLOYMENT_TARGET} in
-+ 10.[012])
-+ allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ ;;
-+ 10.*)
-+ allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+ esac
-+ archive_cmds_need_lc_CXX=no
-+ hardcode_direct_CXX=no
-+ hardcode_automatic_CXX=yes
-+ hardcode_shlibpath_var_CXX=unsupported
-+ whole_archive_flag_spec_CXX=''
-+ link_all_deplibs_CXX=yes
-+
-+ if test "$GXX" = yes ; then
-+ lt_int_apple_cc_single_mod=no
-+ output_verbose_link_cmd='echo'
-+ if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
-+ lt_int_apple_cc_single_mod=yes
-+ fi
-+ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-+ archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+ else
-+ archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+ fi
-+ module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-+ archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ else
-+ archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ fi
-+ module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ else
-+ case $cc_basename in
-+ xlc*)
-+ output_verbose_link_cmd='echo'
-+ archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
-+ module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ ;;
-+ *)
-+ ld_shlibs_CXX=no
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ dgux*)
-+ case $cc_basename in
-+ ec++*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ ghcx*)
-+ # Green Hills C++ Compiler
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ esac
-+ ;;
-+ freebsd[12]*)
-+ # C++ shared libraries reported to be fairly broken before switch to ELF
-+ ld_shlibs_CXX=no
-+ ;;
-+ freebsd-elf*)
-+ archive_cmds_need_lc_CXX=no
-+ ;;
-+ freebsd* | kfreebsd*-gnu | dragonfly*)
-+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-+ # conventions
-+ ld_shlibs_CXX=yes
-+ ;;
-+ gnu*)
-+ ;;
-+ hpux9*)
-+ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_CXX=:
-+ export_dynamic_flag_spec_CXX='${wl}-E'
-+ hardcode_direct_CXX=yes
-+ hardcode_minus_L_CXX=yes # Not in the search PATH,
-+ # but as the default
-+ # location of the library.
-+
-+ case $cc_basename in
-+ CC*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ aCC*)
-+ archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes; then
-+ archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ else
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ hpux10*|hpux11*)
-+ if test $with_gnu_ld = no; then
-+ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ hardcode_libdir_flag_spec_ld_CXX='+b $libdir'
-+ ;;
-+ *)
-+ export_dynamic_flag_spec_CXX='${wl}-E'
-+ ;;
-+ esac
-+ fi
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ hardcode_direct_CXX=no
-+ hardcode_shlibpath_var_CXX=no
-+ ;;
-+ *)
-+ hardcode_direct_CXX=yes
-+ hardcode_minus_L_CXX=yes # Not in the search PATH,
-+ # but as the default
-+ # location of the library.
-+ ;;
-+ esac
-+
-+ case $cc_basename in
-+ CC*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ aCC*)
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ esac
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes; then
-+ if test $with_gnu_ld = no; then
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ ;;
-+ esac
-+ fi
-+ else
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ interix3*)
-+ hardcode_direct_CXX=no
-+ hardcode_shlibpath_var_CXX=no
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec_CXX='${wl}-E'
-+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+ # Instead, shared libraries are loaded at an image base (0x10000000 by
-+ # default) and relocated if they conflict, which is a slow very memory
-+ # consuming and fragmenting process. To avoid this, we pick a random,
-+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
-+ archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ ;;
-+ irix5* | irix6*)
-+ case $cc_basename in
-+ CC*)
-+ # SGI C++
-+ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
-+ # necessary to make sure instantiated templates are included
-+ # in the archive.
-+ old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
-+ ;;
-+ *)
-+ if test "$GXX" = yes; then
-+ if test "$with_gnu_ld" = no; then
-+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-+ fi
-+ fi
-+ link_all_deplibs_CXX=yes
-+ ;;
-+ esac
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_CXX=:
-+ ;;
-+ linux*)
-+ case $cc_basename in
-+ KCC*)
-+ # Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+ # KCC will only create a shared library if the output file
-+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
-+ # to its proper name (with version) after linking.
-+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+ archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
-+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-+ old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-+ ;;
-+ icpc*)
-+ # Intel C++
-+ with_gnu_ld=yes
-+ # version 8.0 and above of icpc choke on multiply defined symbols
-+ # if we add $predep_objects and $postdep_objects, however 7.1 and
-+ # earlier do not add the objects themselves.
-+ case `$CC -V 2>&1` in
-+ *"Version 7."*)
-+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ ;;
-+ *) # Version 8.0 or newer
-+ tmp_idyn=
-+ case $host_cpu in
-+ ia64*) tmp_idyn=' -i_dynamic';;
-+ esac
-+ archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ ;;
-+ esac
-+ archive_cmds_need_lc_CXX=no
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-+ whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-+ ;;
-+ pgCC*)
-+ # Portland Group C++ compiler
-+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-+ whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ ;;
-+ cxx*)
-+ # Compaq C++
-+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-+
-+ runpath_var=LD_RUN_PATH
-+ hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ esac
-+ ;;
-+ lynxos*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ m88k*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ mvs*)
-+ case $cc_basename in
-+ cxx*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ esac
-+ ;;
-+ netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-+ wlarc=
-+ hardcode_libdir_flag_spec_CXX='-R$libdir'
-+ hardcode_direct_CXX=yes
-+ hardcode_shlibpath_var_CXX=no
-+ fi
-+ # Workaround some broken pre-1.5 toolchains
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-+ ;;
-+ openbsd2*)
-+ # C++ shared libraries are fairly broken
-+ ld_shlibs_CXX=no
-+ ;;
-+ openbsd*)
-+ hardcode_direct_CXX=yes
-+ hardcode_shlibpath_var_CXX=no
-+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-+ export_dynamic_flag_spec_CXX='${wl}-E'
-+ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ fi
-+ output_verbose_link_cmd='echo'
-+ ;;
-+ osf3*)
-+ case $cc_basename in
-+ KCC*)
-+ # Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+ # KCC will only create a shared library if the output file
-+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
-+ # to its proper name (with version) after linking.
-+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-+ old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-+
-+ ;;
-+ RCC*)
-+ # Rational C++ 2.4.1
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ cxx*)
-+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+ else
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ osf4* | osf5*)
-+ case $cc_basename in
-+ KCC*)
-+ # Kuck and Associates, Inc. (KAI) C++ Compiler
-+
-+ # KCC will only create a shared library if the output file
-+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
-+ # to its proper name (with version) after linking.
-+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Archives containing C++ object files must be created using
-+ # the KAI C++ compiler.
-+ old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
-+ ;;
-+ RCC*)
-+ # Rational C++ 2.4.1
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ cxx*)
-+ allow_undefined_flag_CXX=' -expect_unresolved \*'
-+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-+ echo "-hidden">> $lib.exp~
-+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
-+ $rm $lib.exp'
-+
-+ hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ #
-+ # There doesn't appear to be a way to prevent this compiler from
-+ # explicitly linking system object files so we need to strip them
-+ # from the output so that they don't get included in the library
-+ # dependencies.
-+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-+ ;;
-+ *)
-+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_CXX=:
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-+
-+ else
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ psos*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ sunos4*)
-+ case $cc_basename in
-+ CC*)
-+ # Sun C++ 4.x
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ lcc*)
-+ # Lucid
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ esac
-+ ;;
-+ solaris*)
-+ case $cc_basename in
-+ CC*)
-+ # Sun C++ 4.2, 5.x and Centerline C++
-+ archive_cmds_need_lc_CXX=yes
-+ no_undefined_flag_CXX=' -zdefs'
-+ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+ hardcode_libdir_flag_spec_CXX='-R$libdir'
-+ hardcode_shlibpath_var_CXX=no
-+ case $host_os in
-+ solaris2.[0-5] | solaris2.[0-5].*) ;;
-+ *)
-+ # The C++ compiler is used as linker so we must use $wl
-+ # flag to pass the commands to the underlying system
-+ # linker. We must also pass each convience library through
-+ # to the system linker between allextract/defaultextract.
-+ # The C++ compiler will combine linker options so we
-+ # cannot just pass the convience library names through
-+ # without $wl.
-+ # Supported since Solaris 2.6 (maybe 2.5.1?)
-+ whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
-+ ;;
-+ esac
-+ link_all_deplibs_CXX=yes
-+
-+ output_verbose_link_cmd='echo'
-+
-+ # Archives containing C++ object files must be created using
-+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
-+ # necessary to make sure instantiated templates are included
-+ # in the archive.
-+ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
-+ ;;
-+ gcx*)
-+ # Green Hills C++ Compiler
-+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+
-+ # The C++ compiler must be used to create the archive.
-+ old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-+ ;;
-+ *)
-+ # GNU C++ compiler with Solaris linker
-+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-+ no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
-+ if $CC --version | grep -v '^2\.7' > /dev/null; then
-+ archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+ archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-+ else
-+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
-+ # platform.
-+ archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+ archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-+
-+ # Commands to make compiler produce verbose output that lists
-+ # what "hidden" libraries, object files and flags are used when
-+ # linking a shared library.
-+ output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-+ fi
-+
-+ hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
-+ fi
-+ ;;
-+ esac
-+ ;;
-+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-+ no_undefined_flag_CXX='${wl}-z,text'
-+ archive_cmds_need_lc_CXX=no
-+ hardcode_shlibpath_var_CXX=no
-+ runpath_var='LD_RUN_PATH'
-+
-+ case $cc_basename in
-+ CC*)
-+ archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ ;;
-+ sysv5* | sco3.2v5* | sco5v6*)
-+ # Note: We can NOT use -z defs as we might desire, because we do not
-+ # link with -lc, and that would cause any symbols used from libc to
-+ # always be unresolved, which means just about no library would
-+ # ever link correctly. If we're not using GNU ld we use -z text
-+ # though, which does catch some bad symbols but isn't as heavy-handed
-+ # as -z defs.
-+ # For security reasons, it is highly recommended that you always
-+ # use absolute paths for naming shared libraries, and exclude the
-+ # DT_RUNPATH tag from executables and libraries. But doing so
-+ # requires that you compile everything twice, which is a pain.
-+ # So that behaviour is only enabled if SCOABSPATH is set to a
-+ # non-empty value in the environment. Most likely only useful for
-+ # creating official distributions of packages.
-+ # This is a hack until libtool officially supports absolute path
-+ # names for shared libraries.
-+ no_undefined_flag_CXX='${wl}-z,text'
-+ allow_undefined_flag_CXX='${wl}-z,nodefs'
-+ archive_cmds_need_lc_CXX=no
-+ hardcode_shlibpath_var_CXX=no
-+ hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+ hardcode_libdir_separator_CXX=':'
-+ link_all_deplibs_CXX=yes
-+ export_dynamic_flag_spec_CXX='${wl}-Bexport'
-+ runpath_var='LD_RUN_PATH'
-+
-+ case $cc_basename in
-+ CC*)
-+ archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ ;;
-+ tandem*)
-+ case $cc_basename in
-+ NCC*)
-+ # NonStop-UX NCC 3.20
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ esac
-+ ;;
-+ vxworks*)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+ *)
-+ # FIXME: insert proper C++ library support
-+ ld_shlibs_CXX=no
-+ ;;
-+esac
-+echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-+echo "${ECHO_T}$ld_shlibs_CXX" >&6
-+test "$ld_shlibs_CXX" = no && can_build_shared=no
-+
-+GCC_CXX="$GXX"
-+LD_CXX="$LD"
-+
-+
-+cat > conftest.$ac_ext <<EOF
-+class Foo
-+{
-+public:
-+ Foo (void) { a = 0; }
-+private:
-+ int a;
-+};
-+EOF
-+
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ # Parse the compiler output and extract the necessary
-+ # objects, libraries and library flags.
-+
-+ # Sentinel used to keep track of whether or not we are before
-+ # the conftest object file.
-+ pre_test_object_deps_done=no
-+
-+ # The `*' in the case matches for architectures that use `case' in
-+ # $output_verbose_cmd can trigger glob expansion during the loop
-+ # eval without this substitution.
-+ output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-+
-+ for p in `eval $output_verbose_link_cmd`; do
-+ case $p in
-+
-+ -L* | -R* | -l*)
-+ # Some compilers place space between "-{L,R}" and the path.
-+ # Remove the space.
-+ if test $p = "-L" \
-+ || test $p = "-R"; then
-+ prev=$p
-+ continue
-+ else
-+ prev=
-+ fi
-+
-+ if test "$pre_test_object_deps_done" = no; then
-+ case $p in
-+ -L* | -R*)
-+ # Internal compiler library paths should come after those
-+ # provided the user. The postdeps already come after the
-+ # user supplied libs so there is no need to process them.
-+ if test -z "$compiler_lib_search_path_CXX"; then
-+ compiler_lib_search_path_CXX="${prev}${p}"
-+ else
-+ compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
-+ fi
-+ ;;
-+ # The "-l" case would never come before the object being
-+ # linked, so don't bother handling this case.
-+ esac
-+ else
-+ if test -z "$postdeps_CXX"; then
-+ postdeps_CXX="${prev}${p}"
-+ else
-+ postdeps_CXX="${postdeps_CXX} ${prev}${p}"
-+ fi
-+ fi
-+ ;;
-+
-+ *.$objext)
-+ # This assumes that the test object file only shows up
-+ # once in the compiler output.
-+ if test "$p" = "conftest.$objext"; then
-+ pre_test_object_deps_done=yes
-+ continue
-+ fi
-+
-+ if test "$pre_test_object_deps_done" = no; then
-+ if test -z "$predep_objects_CXX"; then
-+ predep_objects_CXX="$p"
-+ else
-+ predep_objects_CXX="$predep_objects_CXX $p"
-+ fi
-+ else
-+ if test -z "$postdep_objects_CXX"; then
-+ postdep_objects_CXX="$p"
-+ else
-+ postdep_objects_CXX="$postdep_objects_CXX $p"
-+ fi
-+ fi
-+ ;;
-+
-+ *) ;; # Ignore the rest.
-+
-+ esac
-+ done
-+
-+ # Clean up.
-+ rm -f a.out a.exe
-+else
-+ echo "libtool.m4: error: problem compiling CXX test program"
-+fi
-+
-+$rm -f confest.$objext
-+
-+# PORTME: override above test on systems where it is broken
-+case $host_os in
-+interix3*)
-+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
-+ # hack all around it, let's just trust "g++" to DTRT.
-+ predep_objects_CXX=
-+ postdep_objects_CXX=
-+ postdeps_CXX=
-+ ;;
-+
-+solaris*)
-+ case $cc_basename in
-+ CC*)
-+ # Adding this requires a known-good setup of shared libraries for
-+ # Sun compiler versions before 5.6, else PIC objects from an old
-+ # archive will be linked into the output, leading to subtle bugs.
-+ postdeps_CXX='-lCstd -lCrun'
-+ ;;
-+ esac
-+ ;;
-+esac
-+
-+
-+case " $postdeps_CXX " in
-+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
-+esac
-+
-+lt_prog_compiler_wl_CXX=
-+lt_prog_compiler_pic_CXX=
-+lt_prog_compiler_static_CXX=
-+
-+echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
-+
-+ # C++ specific cases for pic, static, wl, etc.
-+ if test "$GXX" = yes; then
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_static_CXX='-static'
-+
-+ case $host_os in
-+ aix*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static_CXX='-Bstatic'
-+ fi
-+ ;;
-+ amigaos*)
-+ # FIXME: we need at least 68020 code to build shared libraries, but
-+ # adding the `-m68020' flag to GCC prevents building anything better,
-+ # like `-m68040'.
-+ lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
-+ ;;
-+ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+ # PIC is the default for these OSes.
-+ ;;
-+ mingw* | os2* | pw32*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
-+ ;;
-+ darwin* | rhapsody*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ lt_prog_compiler_pic_CXX='-fno-common'
-+ ;;
-+ *djgpp*)
-+ # DJGPP does not support shared libraries at all
-+ lt_prog_compiler_pic_CXX=
-+ ;;
-+ interix3*)
-+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+ # Instead, we relocate shared libraries at runtime.
-+ ;;
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ lt_prog_compiler_pic_CXX=-Kconform_pic
-+ fi
-+ ;;
-+ hpux*)
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_CXX='-fPIC'
-+ ;;
-+ esac
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_CXX='-fPIC'
-+ ;;
-+ esac
-+ else
-+ case $host_os in
-+ aix4* | aix5*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static_CXX='-Bstatic'
-+ else
-+ lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
-+ fi
-+ ;;
-+ chorus*)
-+ case $cc_basename in
-+ cxch68*)
-+ # Green Hills C++ Compiler
-+ # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-+ ;;
-+ esac
-+ ;;
-+ darwin*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ case $cc_basename in
-+ xlc*)
-+ lt_prog_compiler_pic_CXX='-qnocommon'
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ ;;
-+ esac
-+ ;;
-+ dgux*)
-+ case $cc_basename in
-+ ec++*)
-+ lt_prog_compiler_pic_CXX='-KPIC'
-+ ;;
-+ ghcx*)
-+ # Green Hills C++ Compiler
-+ lt_prog_compiler_pic_CXX='-pic'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ freebsd* | kfreebsd*-gnu | dragonfly*)
-+ # FreeBSD uses GNU C++
-+ ;;
-+ hpux9* | hpux10* | hpux11*)
-+ case $cc_basename in
-+ CC*)
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-+ if test "$host_cpu" != ia64; then
-+ lt_prog_compiler_pic_CXX='+Z'
-+ fi
-+ ;;
-+ aCC*)
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_CXX='+Z'
-+ ;;
-+ esac
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ interix*)
-+ # This is c89, which is MS Visual C++ (no shared libs)
-+ # Anyone wants to do a port?
-+ ;;
-+ irix5* | irix6* | nonstopux*)
-+ case $cc_basename in
-+ CC*)
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_static_CXX='-non_shared'
-+ # CC pic flag -KPIC is the default.
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ linux*)
-+ case $cc_basename in
-+ KCC*)
-+ # KAI C++ Compiler
-+ lt_prog_compiler_wl_CXX='--backend -Wl,'
-+ lt_prog_compiler_pic_CXX='-fPIC'
-+ ;;
-+ icpc* | ecpc*)
-+ # Intel C++
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_pic_CXX='-KPIC'
-+ lt_prog_compiler_static_CXX='-static'
-+ ;;
-+ pgCC*)
-+ # Portland Group C++ compiler.
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_pic_CXX='-fpic'
-+ lt_prog_compiler_static_CXX='-Bstatic'
-+ ;;
-+ cxx*)
-+ # Compaq C++
-+ # Make sure the PIC flag is empty. It appears that all Alpha
-+ # Linux and Compaq Tru64 Unix objects are PIC.
-+ lt_prog_compiler_pic_CXX=
-+ lt_prog_compiler_static_CXX='-non_shared'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ lynxos*)
-+ ;;
-+ m88k*)
-+ ;;
-+ mvs*)
-+ case $cc_basename in
-+ cxx*)
-+ lt_prog_compiler_pic_CXX='-W c,exportall'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
-+ ;;
-+ osf3* | osf4* | osf5*)
-+ case $cc_basename in
-+ KCC*)
-+ lt_prog_compiler_wl_CXX='--backend -Wl,'
-+ ;;
-+ RCC*)
-+ # Rational C++ 2.4.1
-+ lt_prog_compiler_pic_CXX='-pic'
-+ ;;
-+ cxx*)
-+ # Digital/Compaq C++
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ # Make sure the PIC flag is empty. It appears that all Alpha
-+ # Linux and Compaq Tru64 Unix objects are PIC.
-+ lt_prog_compiler_pic_CXX=
-+ lt_prog_compiler_static_CXX='-non_shared'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ psos*)
-+ ;;
-+ solaris*)
-+ case $cc_basename in
-+ CC*)
-+ # Sun C++ 4.2, 5.x and Centerline C++
-+ lt_prog_compiler_pic_CXX='-KPIC'
-+ lt_prog_compiler_static_CXX='-Bstatic'
-+ lt_prog_compiler_wl_CXX='-Qoption ld '
-+ ;;
-+ gcx*)
-+ # Green Hills C++ Compiler
-+ lt_prog_compiler_pic_CXX='-PIC'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ sunos4*)
-+ case $cc_basename in
-+ CC*)
-+ # Sun C++ 4.x
-+ lt_prog_compiler_pic_CXX='-pic'
-+ lt_prog_compiler_static_CXX='-Bstatic'
-+ ;;
-+ lcc*)
-+ # Lucid
-+ lt_prog_compiler_pic_CXX='-pic'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ tandem*)
-+ case $cc_basename in
-+ NCC*)
-+ # NonStop-UX NCC 3.20
-+ lt_prog_compiler_pic_CXX='-KPIC'
-+ ;;
-+ *)
-+ ;;
-+ esac
-+ ;;
-+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+ case $cc_basename in
-+ CC*)
-+ lt_prog_compiler_wl_CXX='-Wl,'
-+ lt_prog_compiler_pic_CXX='-KPIC'
-+ lt_prog_compiler_static_CXX='-Bstatic'
-+ ;;
-+ esac
-+ ;;
-+ vxworks*)
-+ ;;
-+ *)
-+ lt_prog_compiler_can_build_shared_CXX=no
-+ ;;
-+ esac
-+ fi
-+
-+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$lt_prog_compiler_pic_CXX"; then
-+
-+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6
-+if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_prog_compiler_pic_works_CXX=no
-+ ac_outfile=conftest.$ac_objext
-+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:11138: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&5
-+ echo "$as_me:11142: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings other than the usual output.
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_prog_compiler_pic_works_CXX=yes
-+ fi
-+ fi
-+ $rm conftest*
-+
-+fi
-+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6
-+
-+if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then
-+ case $lt_prog_compiler_pic_CXX in
-+ "" | " "*) ;;
-+ *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
-+ esac
-+else
-+ lt_prog_compiler_pic_CXX=
-+ lt_prog_compiler_can_build_shared_CXX=no
-+fi
-+
-+fi
-+case $host_os in
-+ # For platforms which do not support PIC, -DPIC is meaningless:
-+ *djgpp*)
-+ lt_prog_compiler_pic_CXX=
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
-+ ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
-+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
-+if test "${lt_prog_compiler_static_works_CXX+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_prog_compiler_static_works_CXX=no
-+ save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-+ printf "$lt_simple_link_test_code" > conftest.$ac_ext
-+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+ # The linker can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ if test -s conftest.err; then
-+ # Append any errors to the config.log.
-+ cat conftest.err 1>&5
-+ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_prog_compiler_static_works_CXX=yes
-+ fi
-+ else
-+ lt_prog_compiler_static_works_CXX=yes
-+ fi
-+ fi
-+ $rm conftest*
-+ LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5
-+echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6
-+
-+if test x"$lt_prog_compiler_static_works_CXX" = xyes; then
-+ :
-+else
-+ lt_prog_compiler_static_CXX=
-+fi
-+
-+
-+echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
-+if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_c_o_CXX=no
-+ $rm -r conftest 2>/dev/null
-+ mkdir conftest
-+ cd conftest
-+ mkdir out
-+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ lt_compiler_flag="-o out/conftest2.$ac_objext"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:11242: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>out/conftest.err)
-+ ac_status=$?
-+ cat out/conftest.err >&5
-+ echo "$as_me:11246: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+ then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_c_o_CXX=yes
-+ fi
-+ fi
-+ chmod u+w . 2>&5
-+ $rm conftest*
-+ # SGI C++ compiler will create directory out/ii_files/ for
-+ # template instantiation
-+ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+ $rm out/* && rmdir out
-+ cd ..
-+ rmdir conftest
-+ $rm conftest*
-+
-+fi
-+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6
-+
-+
-+hard_links="nottested"
-+if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
-+ # do not overwrite the value of need_locks provided by the user
-+ echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
-+ hard_links=yes
-+ $rm conftest*
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ touch conftest.a
-+ ln conftest.a conftest.b 2>&5 || hard_links=no
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6
-+ if test "$hard_links" = no; then
-+ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-+ need_locks=warn
-+ fi
-+else
-+ need_locks=no
-+fi
-+
-+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
-+
-+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ case $host_os in
-+ aix4* | aix5*)
-+ # If we're using GNU nm, then we don't want the "-C" option.
-+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
-+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+ export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ else
-+ export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ fi
-+ ;;
-+ pw32*)
-+ export_symbols_cmds_CXX="$ltdll_cmds"
-+ ;;
-+ cygwin* | mingw*)
-+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
-+ ;;
-+ kfreebsd*-gnu)
-+ link_all_deplibs_CXX=no
-+ ;;
-+ linux*)
-+ link_all_deplibs_CXX=no
-+ ;;
-+ *)
-+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ ;;
-+ esac
-+
-+echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-+echo "${ECHO_T}$ld_shlibs_CXX" >&6
-+test "$ld_shlibs_CXX" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$archive_cmds_need_lc_CXX" in
-+x|xyes)
-+ # Assume -lc should be added
-+ archive_cmds_need_lc_CXX=yes
-+
-+ if test "$enable_shared" = yes && test "$GCC" = yes; then
-+ case $archive_cmds_CXX in
-+ *'~'*)
-+ # FIXME: we may have to deal with multi-command sequences.
-+ ;;
-+ '$CC '*)
-+ # Test whether the compiler implicitly links with -lc since on some
-+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+ # to ld, don't add -lc before -lgcc.
-+ echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
-+ $rm conftest*
-+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } 2>conftest.err; then
-+ soname=conftest
-+ lib=conftest
-+ libobjs=conftest.$ac_objext
-+ deplibs=
-+ wl=$lt_prog_compiler_wl_CXX
-+ pic_flag=$lt_prog_compiler_pic_CXX
-+ compiler_flags=-v
-+ linker_flags=-v
-+ verstring=
-+ output_objdir=.
-+ libname=conftest
-+ lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
-+ allow_undefined_flag_CXX=
-+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+ (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+ then
-+ archive_cmds_need_lc_CXX=no
-+ else
-+ archive_cmds_need_lc_CXX=yes
-+ fi
-+ allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
-+ else
-+ cat conftest.err 1>&5
-+ fi
-+ $rm conftest*
-+ echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
-+echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6
-+ ;;
-+ esac
-+ fi
-+ ;;
-+esac
-+
-+echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+if test "$GCC" = yes; then
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-+ # if the path contains ";" then we assume it to be the separator
-+ # otherwise default to the standard path separator (i.e. ":") - it is
-+ # assumed that no part of a normal pathname contains ";" but that should
-+ # okay in the real world where ";" in dirpaths is itself problematic.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+else
-+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-+fi
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+ shlibpath_var=LIBPATH
-+
-+ # AIX 3 has no versioning support, so we append a major version to the name.
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+
-+aix4* | aix5*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ hardcode_into_libs=yes
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 supports IA64
-+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ else
-+ # With GCC up to 2.95.x, collect2 would create an import file
-+ # for dependence libraries. The import file would start with
-+ # the line `#! .'. This would cause the generated library to
-+ # depend on `.', always an invalid library. This was fixed in
-+ # development snapshots of GCC prior to 3.0.
-+ case $host_os in
-+ aix4 | aix4.[01] | aix4.[01].*)
-+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+ echo ' yes '
-+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+ :
-+ else
-+ can_build_shared=no
-+ fi
-+ ;;
-+ esac
-+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+ # soname into executable. Probably we can add versioning support to
-+ # collect2, so additional links can be useful in future.
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+ # instead of lib<name>.a to let people know that these are not
-+ # typical AIX shared libraries.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ else
-+ # We preserve .a as extension for shared libraries through AIX4.2
-+ # and later when we are not doing run time linking.
-+ library_names_spec='${libname}${release}.a $libname.a'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ fi
-+ shlibpath_var=LIBPATH
-+ fi
-+ ;;
-+
-+amigaos*)
-+ library_names_spec='$libname.ixlibrary $libname.a'
-+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+ ;;
-+
-+beos*)
-+ library_names_spec='${libname}${shared_ext}'
-+ dynamic_linker="$host_os ld.so"
-+ shlibpath_var=LIBRARY_PATH
-+ ;;
-+
-+bsdi[45]*)
-+ version_type=linux
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+ # the default ld.so.conf also contains /usr/contrib/lib and
-+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+ # libtool to hard-code these into programs
-+ ;;
-+
-+cygwin* | mingw* | pw32*)
-+ version_type=windows
-+ shrext_cmds=".dll"
-+ need_version=no
-+ need_lib_prefix=no
-+
-+ case $GCC,$host_os in
-+ yes,cygwin* | yes,mingw* | yes,pw32*)
-+ library_names_spec='$libname.dll.a'
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname~
-+ chmod a+x \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $rm \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+
-+ case $host_os in
-+ cygwin*)
-+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+ ;;
-+ mingw*)
-+ # MinGW DLLs use traditional 'lib' prefix
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-+ # It is most probably a Windows format PATH printed by
-+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+ # path with ; separators, and with drive letters. We can handle the
-+ # drive letters (cygwin fileutils understands them), so leave them,
-+ # especially as we might pass files found there to a mingw objdump,
-+ # which wouldn't understand a cygwinified path. Ahh.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ ;;
-+ pw32*)
-+ # pw32 DLLs use 'pw' prefix rather than 'lib'
-+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ ;;
-+ esac
-+ dynamic_linker='Win32 ld.exe'
-+ # FIXME: first we should search . and the directory the executable is in
-+ shlibpath_var=PATH
-+ ;;
-+
-+darwin* | rhapsody*)
-+ dynamic_linker="$host_os dyld"
-+ version_type=darwin
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+ soname_spec='${libname}${release}${major}$shared_ext'
-+ shlibpath_overrides_runpath=yes
-+ shlibpath_var=DYLD_LIBRARY_PATH
-+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-+ if test "$GCC" = yes; then
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-+ else
-+ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
-+ fi
-+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+ ;;
-+
-+dgux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+freebsd1*)
-+ dynamic_linker=no
-+ ;;
-+
-+kfreebsd*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='GNU ld.so'
-+ ;;
-+
-+freebsd* | dragonfly*)
-+ # DragonFly does not have aout. When/if they implement a new
-+ # versioning mechanism, adjust this.
-+ if test -x /usr/bin/objformat; then
-+ objformat=`/usr/bin/objformat`
-+ else
-+ case $host_os in
-+ freebsd[123]*) objformat=aout ;;
-+ *) objformat=elf ;;
-+ esac
-+ fi
-+ version_type=freebsd-$objformat
-+ case $version_type in
-+ freebsd-elf*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ need_version=no
-+ need_lib_prefix=no
-+ ;;
-+ freebsd-*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+ need_version=yes
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_os in
-+ freebsd2*)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ freebsd3.[01]* | freebsdelf3.[01]*)
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+ freebsd*) # from 4.6 on
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ esac
-+ ;;
-+
-+gnu*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+ # Give a soname corresponding to the major version so that dld.sl refuses to
-+ # link against other versions.
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ case $host_cpu in
-+ ia64*)
-+ shrext_cmds='.so'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.so"
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ if test "X$HPUX_IA64_MODE" = X32; then
-+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+ else
-+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+ fi
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ hppa*64*)
-+ shrext_cmds='.sl'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ *)
-+ shrext_cmds='.sl'
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=SHLIB_PATH
-+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+ esac
-+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+ postinstall_cmds='chmod 555 $lib'
-+ ;;
-+
-+interix3*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $host_os in
-+ nonstopux*) version_type=nonstopux ;;
-+ *)
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ version_type=linux
-+ else
-+ version_type=irix
-+ fi ;;
-+ esac
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ case $host_os in
-+ irix5* | nonstopux*)
-+ libsuff= shlibsuff=
-+ ;;
-+ *)
-+ case $LD in # libtool.m4 will add one of these switches to LD
-+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+ libsuff= shlibsuff= libmagic=32-bit;;
-+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+ libsuff=32 shlibsuff=N32 libmagic=N32;;
-+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+ *) libsuff= shlibsuff= libmagic=never-match;;
-+ esac
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+ hardcode_into_libs=yes
-+ ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+ dynamic_linker=no
-+ ;;
-+
-+# This must be Linux ELF.
-+linux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ # This implies no fast_install, which is unacceptable.
-+ # Some rework will be needed to allow for fast_install
-+ # before this can be enabled.
-+ hardcode_into_libs=yes
-+
-+ # Append ld.so.conf contents to the search path
-+ if test -f /etc/ld.so.conf; then
-+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+ fi
-+
-+ # We used to test for /lib/ld.so.1 and disable shared libraries on
-+ # powerpc, because MkLinux only supported shared libraries with the
-+ # GNU dynamic linker. Since this was broken with cross compilers,
-+ # most powerpc-linux boxes support dynamic linking these days and
-+ # people can always --disable-shared, the test was removed, and we
-+ # assume the GNU/Linux dynamic linker is in use.
-+ dynamic_linker='GNU/Linux ld.so'
-+ ;;
-+
-+netbsdelf*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='NetBSD ld.elf_so'
-+ ;;
-+
-+knetbsd*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='GNU ld.so'
-+ ;;
-+
-+netbsd*)
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ dynamic_linker='NetBSD (a.out) ld.so'
-+ else
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='NetBSD ld.elf_so'
-+ fi
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+
-+newsos6)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+nto-qnx*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+openbsd*)
-+ version_type=sunos
-+ sys_lib_dlsearch_path_spec="/usr/lib"
-+ need_lib_prefix=no
-+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+ case $host_os in
-+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+ *) need_version=no ;;
-+ esac
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ case $host_os in
-+ openbsd2.[89] | openbsd2.[89].*)
-+ shlibpath_overrides_runpath=no
-+ ;;
-+ *)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ esac
-+ else
-+ shlibpath_overrides_runpath=yes
-+ fi
-+ ;;
-+
-+os2*)
-+ libname_spec='$name'
-+ shrext_cmds=".dll"
-+ need_lib_prefix=no
-+ library_names_spec='$libname${shared_ext} $libname.a'
-+ dynamic_linker='OS/2 ld.exe'
-+ shlibpath_var=LIBPATH
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ version_type=osf
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+ ;;
-+
-+solaris*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ # ldd complains unless libraries are executable
-+ postinstall_cmds='chmod +x $lib'
-+ ;;
-+
-+sunos4*)
-+ version_type=sunos
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ if test "$with_gnu_ld" = yes; then
-+ need_lib_prefix=no
-+ fi
-+ need_version=yes
-+ ;;
-+
-+sysv4 | sysv4.3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_vendor in
-+ sni)
-+ shlibpath_overrides_runpath=no
-+ need_lib_prefix=no
-+ export_dynamic_flag_spec='${wl}-Blargedynsym'
-+ runpath_var=LD_RUN_PATH
-+ ;;
-+ siemens)
-+ need_lib_prefix=no
-+ ;;
-+ motorola)
-+ need_lib_prefix=no
-+ need_version=no
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+ ;;
-+ esac
-+ ;;
-+
-+sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ version_type=linux
-+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+ soname_spec='$libname${shared_ext}.$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ fi
-+ ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+ version_type=freebsd-elf
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ if test "$with_gnu_ld" = yes; then
-+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+ shlibpath_overrides_runpath=no
-+ else
-+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+ shlibpath_overrides_runpath=yes
-+ case $host_os in
-+ sco3.2v5*)
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+ ;;
-+ esac
-+ fi
-+ sys_lib_dlsearch_path_spec='/usr/lib'
-+ ;;
-+
-+uts4*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+*)
-+ dynamic_linker=no
-+ ;;
-+esac
-+echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
-+hardcode_action_CXX=
-+if test -n "$hardcode_libdir_flag_spec_CXX" || \
-+ test -n "$runpath_var_CXX" || \
-+ test "X$hardcode_automatic_CXX" = "Xyes" ; then
-+
-+ # We can hardcode non-existant directories.
-+ if test "$hardcode_direct_CXX" != no &&
-+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+ # have to relink, otherwise we might link with an installed library
-+ # when we should be linking with a yet-to-be-installed one
-+ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
-+ test "$hardcode_minus_L_CXX" != no; then
-+ # Linking always hardcodes the temporary library directory.
-+ hardcode_action_CXX=relink
-+ else
-+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+ hardcode_action_CXX=immediate
-+ fi
-+else
-+ # We cannot hardcode anything, or else we can only hardcode existing
-+ # directories.
-+ hardcode_action_CXX=unsupported
-+fi
-+echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
-+echo "${ECHO_T}$hardcode_action_CXX" >&6
-+
-+if test "$hardcode_action_CXX" = relink; then
-+ # Fast installation is not supported
-+ enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+ test "$enable_shared" = no; then
-+ # Fast installation is not necessary
-+ enable_fast_install=needless
-+fi
-+
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+ # See if we are running on zsh, and set the options which allow our commands through
-+ # without removal of \ escapes.
-+ if test -n "${ZSH_VERSION+set}" ; then
-+ setopt NO_GLOB_SUBST
-+ fi
-+ # Now quote all the things that may contain metacharacters while being
-+ # careful not to overquote the AC_SUBSTed values. We take copies of the
-+ # variables and quote the copies for generation of the libtool script.
-+ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+ SED SHELL STRIP \
-+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+ deplibs_check_method reload_flag reload_cmds need_locks \
-+ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+ lt_cv_sys_global_symbol_to_c_name_address \
-+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+ old_postinstall_cmds old_postuninstall_cmds \
-+ compiler_CXX \
-+ CC_CXX \
-+ LD_CXX \
-+ lt_prog_compiler_wl_CXX \
-+ lt_prog_compiler_pic_CXX \
-+ lt_prog_compiler_static_CXX \
-+ lt_prog_compiler_no_builtin_flag_CXX \
-+ export_dynamic_flag_spec_CXX \
-+ thread_safe_flag_spec_CXX \
-+ whole_archive_flag_spec_CXX \
-+ enable_shared_with_static_runtimes_CXX \
-+ old_archive_cmds_CXX \
-+ old_archive_from_new_cmds_CXX \
-+ predep_objects_CXX \
-+ postdep_objects_CXX \
-+ predeps_CXX \
-+ postdeps_CXX \
-+ compiler_lib_search_path_CXX \
-+ archive_cmds_CXX \
-+ archive_expsym_cmds_CXX \
-+ postinstall_cmds_CXX \
-+ postuninstall_cmds_CXX \
-+ old_archive_from_expsyms_cmds_CXX \
-+ allow_undefined_flag_CXX \
-+ no_undefined_flag_CXX \
-+ export_symbols_cmds_CXX \
-+ hardcode_libdir_flag_spec_CXX \
-+ hardcode_libdir_flag_spec_ld_CXX \
-+ hardcode_libdir_separator_CXX \
-+ hardcode_automatic_CXX \
-+ module_cmds_CXX \
-+ module_expsym_cmds_CXX \
-+ lt_cv_prog_compiler_c_o_CXX \
-+ exclude_expsyms_CXX \
-+ include_expsyms_CXX; do
-+
-+ case $var in
-+ old_archive_cmds_CXX | \
-+ old_archive_from_new_cmds_CXX | \
-+ archive_cmds_CXX | \
-+ archive_expsym_cmds_CXX | \
-+ module_cmds_CXX | \
-+ module_expsym_cmds_CXX | \
-+ old_archive_from_expsyms_cmds_CXX | \
-+ export_symbols_cmds_CXX | \
-+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+ postinstall_cmds | postuninstall_cmds | \
-+ old_postinstall_cmds | old_postuninstall_cmds | \
-+ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+ # Double-quote double-evaled strings.
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+ ;;
-+ *)
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+ ;;
-+ esac
-+ done
-+
-+ case $lt_echo in
-+ *'\$0 --fallback-echo"')
-+ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+ ;;
-+ esac
-+
-+cfgfile="$ofile"
-+
-+ cat <<__EOF__ >> "$cfgfile"
-+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc_CXX
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler_CXX
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC_CXX
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD_CXX
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_CXX
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic_CXX
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static_CXX
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names. First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds_CXX
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds_CXX
-+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds_CXX
-+module_expsym_cmds=$lt_module_expsym_cmds_CXX
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects_CXX
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects_CXX
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps_CXX
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps_CXX
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag_CXX
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag_CXX
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action_CXX
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct_CXX
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L_CXX
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic_CXX
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs_CXX
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path="$fix_srcfile_path_CXX"
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols_CXX
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds_CXX
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms_CXX
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms_CXX
-+
-+# ### END LIBTOOL TAG CONFIG: $tagname
-+
-+__EOF__
-+
-+
-+else
-+ # If there is no Makefile yet, we rely on a make rule to execute
-+ # `config.status --recheck' to rerun these tests and create the
-+ # libtool script then.
-+ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+ if test -f "$ltmain_in"; then
-+ test -f Makefile && make "$ltmain"
-+ fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC=$lt_save_CC
-+LDCXX=$LD
-+LD=$lt_save_LD
-+GCC=$lt_save_GCC
-+with_gnu_ldcxx=$with_gnu_ld
-+with_gnu_ld=$lt_save_with_gnu_ld
-+lt_cv_path_LDCXX=$lt_cv_path_LD
-+lt_cv_path_LD=$lt_save_path_LD
-+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-+
-+ else
-+ tagname=""
-+ fi
-+ ;;
-+
-+ F77)
-+ if test -n "$F77" && test "X$F77" != "Xno"; then
-+
-+ac_ext=f
-+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-+
-+
-+archive_cmds_need_lc_F77=no
-+allow_undefined_flag_F77=
-+always_export_symbols_F77=no
-+archive_expsym_cmds_F77=
-+export_dynamic_flag_spec_F77=
-+hardcode_direct_F77=no
-+hardcode_libdir_flag_spec_F77=
-+hardcode_libdir_flag_spec_ld_F77=
-+hardcode_libdir_separator_F77=
-+hardcode_minus_L_F77=no
-+hardcode_automatic_F77=no
-+module_cmds_F77=
-+module_expsym_cmds_F77=
-+link_all_deplibs_F77=unknown
-+old_archive_cmds_F77=$old_archive_cmds
-+no_undefined_flag_F77=
-+whole_archive_flag_spec_F77=
-+enable_shared_with_static_runtimes_F77=no
-+
-+# Source file extension for f77 test sources.
-+ac_ext=f
-+
-+# Object file extension for compiled f77 test sources.
-+objext=o
-+objext_F77=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code=" subroutine t\n return\n end\n"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code=" program t\n end\n"
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+printf "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${F77-"f77"}
-+compiler=$CC
-+compiler_F77=$CC
-+for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+
-+echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
-+echo "$as_me:$LINENO: result: $can_build_shared" >&5
-+echo "${ECHO_T}$can_build_shared" >&6
-+
-+echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
-+test "$can_build_shared" = "no" && enable_shared=no
-+
-+# On AIX, shared libraries and static libraries use the same namespace, and
-+# are all built from PIC.
-+case $host_os in
-+aix3*)
-+ test "$enable_shared" = yes && enable_static=no
-+ if test -n "$RANLIB"; then
-+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
-+ postinstall_cmds='$RANLIB $lib'
-+ fi
-+ ;;
-+aix4* | aix5*)
-+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-+ test "$enable_shared" = yes && enable_static=no
-+ fi
-+ ;;
-+esac
-+echo "$as_me:$LINENO: result: $enable_shared" >&5
-+echo "${ECHO_T}$enable_shared" >&6
-+
-+echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
-+# Make sure either enable_shared or enable_static is yes.
-+test "$enable_shared" = yes || enable_static=yes
-+echo "$as_me:$LINENO: result: $enable_static" >&5
-+echo "${ECHO_T}$enable_static" >&6
-+
-+GCC_F77="$G77"
-+LD_F77="$LD"
-+
-+lt_prog_compiler_wl_F77=
-+lt_prog_compiler_pic_F77=
-+lt_prog_compiler_static_F77=
-+
-+echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
-+
-+ if test "$GCC" = yes; then
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ lt_prog_compiler_static_F77='-static'
-+
-+ case $host_os in
-+ aix*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ # FIXME: we need at least 68020 code to build shared libraries, but
-+ # adding the `-m68020' flag to GCC prevents building anything better,
-+ # like `-m68040'.
-+ lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
-+ ;;
-+
-+ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+ # PIC is the default for these OSes.
-+ ;;
-+
-+ mingw* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ lt_prog_compiler_pic_F77='-DDLL_EXPORT'
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ lt_prog_compiler_pic_F77='-fno-common'
-+ ;;
-+
-+ interix3*)
-+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+ # Instead, we relocate shared libraries at runtime.
-+ ;;
-+
-+ msdosdjgpp*)
-+ # Just because we use GCC doesn't mean we suddenly get shared libraries
-+ # on systems that don't support them.
-+ lt_prog_compiler_can_build_shared_F77=no
-+ enable_shared=no
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ lt_prog_compiler_pic_F77=-Kconform_pic
-+ fi
-+ ;;
-+
-+ hpux*)
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_F77='-fPIC'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ lt_prog_compiler_pic_F77='-fPIC'
-+ ;;
-+ esac
-+ else
-+ # PORTME Check for flag to pass linker flags through the system compiler.
-+ case $host_os in
-+ aix*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ else
-+ lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
-+ fi
-+ ;;
-+ darwin*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ case $cc_basename in
-+ xlc*)
-+ lt_prog_compiler_pic_F77='-qnocommon'
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ ;;
-+ esac
-+ ;;
-+
-+ mingw* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ lt_prog_compiler_pic_F77='-DDLL_EXPORT'
-+ ;;
-+
-+ hpux9* | hpux10* | hpux11*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_F77='+Z'
-+ ;;
-+ esac
-+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
-+ lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ # PIC (with -KPIC) is the default.
-+ lt_prog_compiler_static_F77='-non_shared'
-+ ;;
-+
-+ newsos6)
-+ lt_prog_compiler_pic_F77='-KPIC'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ ;;
-+
-+ linux*)
-+ case $cc_basename in
-+ icc* | ecc*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ lt_prog_compiler_pic_F77='-KPIC'
-+ lt_prog_compiler_static_F77='-static'
-+ ;;
-+ pgcc* | pgf77* | pgf90* | pgf95*)
-+ # Portland Group compilers (*not* the Pentium gcc compiler,
-+ # which looks to be a dead project)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ lt_prog_compiler_pic_F77='-fpic'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ ;;
-+ ccc*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ # All Alpha code is PIC.
-+ lt_prog_compiler_static_F77='-non_shared'
-+ ;;
-+ esac
-+ ;;
-+
-+ osf3* | osf4* | osf5*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ # All OSF/1 code is PIC.
-+ lt_prog_compiler_static_F77='-non_shared'
-+ ;;
-+
-+ solaris*)
-+ lt_prog_compiler_pic_F77='-KPIC'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ case $cc_basename in
-+ f77* | f90* | f95*)
-+ lt_prog_compiler_wl_F77='-Qoption ld ';;
-+ *)
-+ lt_prog_compiler_wl_F77='-Wl,';;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ lt_prog_compiler_wl_F77='-Qoption ld '
-+ lt_prog_compiler_pic_F77='-PIC'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ ;;
-+
-+ sysv4 | sysv4.2uw2* | sysv4.3*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ lt_prog_compiler_pic_F77='-KPIC'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ lt_prog_compiler_pic_F77='-Kconform_pic'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ fi
-+ ;;
-+
-+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ lt_prog_compiler_pic_F77='-KPIC'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ ;;
-+
-+ unicos*)
-+ lt_prog_compiler_wl_F77='-Wl,'
-+ lt_prog_compiler_can_build_shared_F77=no
-+ ;;
-+
-+ uts4*)
-+ lt_prog_compiler_pic_F77='-pic'
-+ lt_prog_compiler_static_F77='-Bstatic'
-+ ;;
-+
-+ *)
-+ lt_prog_compiler_can_build_shared_F77=no
-+ ;;
-+ esac
-+ fi
-+
-+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$lt_prog_compiler_pic_F77"; then
-+
-+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6
-+if test "${lt_prog_compiler_pic_works_F77+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_prog_compiler_pic_works_F77=no
-+ ac_outfile=conftest.$ac_objext
-+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="$lt_prog_compiler_pic_F77"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:12830: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&5
-+ echo "$as_me:12834: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings other than the usual output.
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_prog_compiler_pic_works_F77=yes
-+ fi
-+ fi
-+ $rm conftest*
-+
-+fi
-+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6
-+
-+if test x"$lt_prog_compiler_pic_works_F77" = xyes; then
-+ case $lt_prog_compiler_pic_F77 in
-+ "" | " "*) ;;
-+ *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
-+ esac
-+else
-+ lt_prog_compiler_pic_F77=
-+ lt_prog_compiler_can_build_shared_F77=no
-+fi
-+
-+fi
-+case $host_os in
-+ # For platforms which do not support PIC, -DPIC is meaningless:
-+ *djgpp*)
-+ lt_prog_compiler_pic_F77=
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
-+ ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
-+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
-+if test "${lt_prog_compiler_static_works_F77+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_prog_compiler_static_works_F77=no
-+ save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-+ printf "$lt_simple_link_test_code" > conftest.$ac_ext
-+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+ # The linker can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ if test -s conftest.err; then
-+ # Append any errors to the config.log.
-+ cat conftest.err 1>&5
-+ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_prog_compiler_static_works_F77=yes
-+ fi
-+ else
-+ lt_prog_compiler_static_works_F77=yes
-+ fi
-+ fi
-+ $rm conftest*
-+ LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5
-+echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6
-+
-+if test x"$lt_prog_compiler_static_works_F77" = xyes; then
-+ :
-+else
-+ lt_prog_compiler_static_F77=
-+fi
-+
-+
-+echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
-+if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_c_o_F77=no
-+ $rm -r conftest 2>/dev/null
-+ mkdir conftest
-+ cd conftest
-+ mkdir out
-+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ lt_compiler_flag="-o out/conftest2.$ac_objext"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:12934: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>out/conftest.err)
-+ ac_status=$?
-+ cat out/conftest.err >&5
-+ echo "$as_me:12938: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+ then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_c_o_F77=yes
-+ fi
-+ fi
-+ chmod u+w . 2>&5
-+ $rm conftest*
-+ # SGI C++ compiler will create directory out/ii_files/ for
-+ # template instantiation
-+ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+ $rm out/* && rmdir out
-+ cd ..
-+ rmdir conftest
-+ $rm conftest*
-+
-+fi
-+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6
-+
-+
-+hard_links="nottested"
-+if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
-+ # do not overwrite the value of need_locks provided by the user
-+ echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
-+ hard_links=yes
-+ $rm conftest*
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ touch conftest.a
-+ ln conftest.a conftest.b 2>&5 || hard_links=no
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6
-+ if test "$hard_links" = no; then
-+ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-+ need_locks=warn
-+ fi
-+else
-+ need_locks=no
-+fi
-+
-+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
-+
-+ runpath_var=
-+ allow_undefined_flag_F77=
-+ enable_shared_with_static_runtimes_F77=no
-+ archive_cmds_F77=
-+ archive_expsym_cmds_F77=
-+ old_archive_From_new_cmds_F77=
-+ old_archive_from_expsyms_cmds_F77=
-+ export_dynamic_flag_spec_F77=
-+ whole_archive_flag_spec_F77=
-+ thread_safe_flag_spec_F77=
-+ hardcode_libdir_flag_spec_F77=
-+ hardcode_libdir_flag_spec_ld_F77=
-+ hardcode_libdir_separator_F77=
-+ hardcode_direct_F77=no
-+ hardcode_minus_L_F77=no
-+ hardcode_shlibpath_var_F77=unsupported
-+ link_all_deplibs_F77=unknown
-+ hardcode_automatic_F77=no
-+ module_cmds_F77=
-+ module_expsym_cmds_F77=
-+ always_export_symbols_F77=no
-+ export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ # include_expsyms should be a list of space-separated symbols to be *always*
-+ # included in the symbol list
-+ include_expsyms_F77=
-+ # exclude_expsyms can be an extended regexp of symbols to exclude
-+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
-+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-+ # as well as any symbol that contains `d'.
-+ exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_"
-+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-+ # platforms (ab)use it in PIC code, but their linkers get confused if
-+ # the symbol is explicitly referenced. Since portable code cannot
-+ # rely on this symbol name, it's probably fine to never include it in
-+ # preloaded symbol tables.
-+ extract_expsyms_cmds=
-+ # Just being paranoid about ensuring that cc_basename is set.
-+ for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+ case $host_os in
-+ cygwin* | mingw* | pw32*)
-+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ if test "$GCC" != yes; then
-+ with_gnu_ld=no
-+ fi
-+ ;;
-+ interix*)
-+ # we just hope/assume this is gcc and not c89 (= MSVC++)
-+ with_gnu_ld=yes
-+ ;;
-+ openbsd*)
-+ with_gnu_ld=no
-+ ;;
-+ esac
-+
-+ ld_shlibs_F77=yes
-+ if test "$with_gnu_ld" = yes; then
-+ # If archive_cmds runs LD, not CC, wlarc should be empty
-+ wlarc='${wl}'
-+
-+ # Set some defaults for GNU ld with shared library support. These
-+ # are reset later if shared libraries are not supported. Putting them
-+ # here allows them to be overridden if necessary.
-+ runpath_var=LD_RUN_PATH
-+ hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
-+ export_dynamic_flag_spec_F77='${wl}--export-dynamic'
-+ # ancient GNU ld didn't support --whole-archive et. al.
-+ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-+ whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ else
-+ whole_archive_flag_spec_F77=
-+ fi
-+ supports_anon_versioning=no
-+ case `$LD -v 2>/dev/null` in
-+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-+ *\ 2.11.*) ;; # other 2.11 versions
-+ *) supports_anon_versioning=yes ;;
-+ esac
-+
-+ # See if GNU ld supports shared libraries.
-+ case $host_os in
-+ aix3* | aix4* | aix5*)
-+ # On AIX/PPC, the GNU linker is very broken
-+ if test "$host_cpu" != ia64; then
-+ ld_shlibs_F77=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-+*** to be unable to reliably create shared libraries on AIX.
-+*** Therefore, libtool is disabling shared libraries support. If you
-+*** really care for shared libraries, you may want to modify your PATH
-+*** so that a non-GNU linker is found, and then restart.
-+
-+EOF
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_minus_L_F77=yes
-+
-+ # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-+ # that the semantics of dynamic libraries on AmigaOS, at least up
-+ # to version 4, is to share data among multiple programs linked
-+ # with the same dynamic library. Since this doesn't match the
-+ # behavior of shared libraries on other platforms, we can't use
-+ # them.
-+ ld_shlibs_F77=no
-+ ;;
-+
-+ beos*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ allow_undefined_flag_F77=unsupported
-+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-+ # support --undefined. This deserves some investigation. FIXME
-+ archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ else
-+ ld_shlibs_F77=no
-+ fi
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
-+ # as there is no search path for DLLs.
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ allow_undefined_flag_F77=unsupported
-+ always_export_symbols_F77=no
-+ enable_shared_with_static_runtimes_F77=yes
-+ export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
-+
-+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ # If the export-symbols file already is a .def file (1st line
-+ # is EXPORTS), use it as is; otherwise, prepend...
-+ archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname.def;
-+ else
-+ echo EXPORTS > $output_objdir/$soname.def;
-+ cat $export_symbols >> $output_objdir/$soname.def;
-+ fi~
-+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ else
-+ ld_shlibs_F77=no
-+ fi
-+ ;;
-+
-+ interix3*)
-+ hardcode_direct_F77=no
-+ hardcode_shlibpath_var_F77=no
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec_F77='${wl}-E'
-+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+ # Instead, shared libraries are loaded at an image base (0x10000000 by
-+ # default) and relocated if they conflict, which is a slow very memory
-+ # consuming and fragmenting process. To avoid this, we pick a random,
-+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
-+ archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ ;;
-+
-+ linux*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ tmp_addflag=
-+ case $cc_basename,$host_cpu in
-+ pgcc*) # Portland Group C compiler
-+ whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag'
-+ ;;
-+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
-+ whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag -Mnomain' ;;
-+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
-+ tmp_addflag=' -i_dynamic' ;;
-+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
-+ tmp_addflag=' -i_dynamic -nofor_main' ;;
-+ ifc* | ifort*) # Intel Fortran compiler
-+ tmp_addflag=' -nofor_main' ;;
-+ esac
-+ archive_cmds_F77='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+
-+ if test $supports_anon_versioning = yes; then
-+ archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
-+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-+ $echo "local: *; };" >> $output_objdir/$libname.ver~
-+ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-+ fi
-+ link_all_deplibs_F77=no
-+ else
-+ ld_shlibs_F77=no
-+ fi
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-+ wlarc=
-+ else
-+ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ fi
-+ ;;
-+
-+ solaris*)
-+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-+ ld_shlibs_F77=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-+*** create shared libraries on Solaris systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.9.1 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+EOF
-+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ ld_shlibs_F77=no
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-+ case `$LD -v 2>&1` in
-+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-+ ld_shlibs_F77=no
-+ cat <<_LT_EOF 1>&2
-+
-+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-+*** reliably create shared libraries on SCO systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+_LT_EOF
-+ ;;
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-+ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-+ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-+ else
-+ ld_shlibs_F77=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ wlarc=
-+ hardcode_direct_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ ld_shlibs_F77=no
-+ fi
-+ ;;
-+ esac
-+
-+ if test "$ld_shlibs_F77" = no; then
-+ runpath_var=
-+ hardcode_libdir_flag_spec_F77=
-+ export_dynamic_flag_spec_F77=
-+ whole_archive_flag_spec_F77=
-+ fi
-+ else
-+ # PORTME fill in a description of your system's linker (not GNU ld)
-+ case $host_os in
-+ aix3*)
-+ allow_undefined_flag_F77=unsupported
-+ always_export_symbols_F77=yes
-+ archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-+ # Note: this linker hardcodes the directories in LIBPATH if there
-+ # are no directories specified by -L.
-+ hardcode_minus_L_F77=yes
-+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-+ # Neither direct hardcoding nor static linking is supported with a
-+ # broken collect2.
-+ hardcode_direct_F77=unsupported
-+ fi
-+ ;;
-+
-+ aix4* | aix5*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ exp_sym_flag='-Bexport'
-+ no_entry_flag=""
-+ else
-+ # If we're using GNU nm, then we don't want the "-C" option.
-+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
-+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+ export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ else
-+ export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ fi
-+ aix_use_runtimelinking=no
-+
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-+ for ld_flag in $LDFLAGS; do
-+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-+ aix_use_runtimelinking=yes
-+ break
-+ fi
-+ done
-+ ;;
-+ esac
-+
-+ exp_sym_flag='-bexport'
-+ no_entry_flag='-bnoentry'
-+ fi
-+
-+ # When large executables or shared objects are built, AIX ld can
-+ # have problems creating the table of contents. If linking a library
-+ # or program results in "error TOC overflow" add -mminimal-toc to
-+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+ archive_cmds_F77=''
-+ hardcode_direct_F77=yes
-+ hardcode_libdir_separator_F77=':'
-+ link_all_deplibs_F77=yes
-+
-+ if test "$GCC" = yes; then
-+ case $host_os in aix4.[012]|aix4.[012].*)
-+ # We only want to do this on AIX 4.2 and lower, the check
-+ # below for broken collect2 doesn't work under 4.3+
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ hardcode_direct_F77=yes
-+ else
-+ # We have old collect2
-+ hardcode_direct_F77=unsupported
-+ # It fails to find uninstalled libraries when the uninstalled
-+ # path is not listed in the libpath. Setting hardcode_minus_L
-+ # to unsupported forces relinking
-+ hardcode_minus_L_F77=yes
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_libdir_separator_F77=
-+ fi
-+ ;;
-+ esac
-+ shared_flag='-shared'
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag="$shared_flag "'${wl}-G'
-+ fi
-+ else
-+ # not using gcc
-+ if test "$host_cpu" = ia64; then
-+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+ # chokes on -Wl,-G. The following line is correct:
-+ shared_flag='-G'
-+ else
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag='${wl}-G'
-+ else
-+ shared_flag='${wl}-bM:SRE'
-+ fi
-+ fi
-+ fi
-+
-+ # It seems that -bexpall does not export symbols beginning with
-+ # underscore (_), so it is better to generate a list of symbols to export.
-+ always_export_symbols_F77=yes
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # Warning - without using the other runtime loading flags (-brtl),
-+ # -berok will link without error, but may produce a broken library.
-+ allow_undefined_flag_F77='-berok'
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+ program main
-+
-+ end
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`; fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+ else
-+ if test "$host_cpu" = ia64; then
-+ hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
-+ allow_undefined_flag_F77="-z nodefs"
-+ archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+ else
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+ program main
-+
-+ end
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`; fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ # Warning - without using the other run time loading flags,
-+ # -berok will link without error, but may produce a broken library.
-+ no_undefined_flag_F77=' ${wl}-bernotok'
-+ allow_undefined_flag_F77=' ${wl}-berok'
-+ # Exported symbols can be pulled into shared objects from archives
-+ whole_archive_flag_spec_F77='$convenience'
-+ archive_cmds_need_lc_F77=yes
-+ # This is similar to how AIX traditionally builds its shared libraries.
-+ archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+ fi
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_minus_L_F77=yes
-+ # see comment about different semantics on the GNU ld section
-+ ld_shlibs_F77=no
-+ ;;
-+
-+ bsdi[45]*)
-+ export_dynamic_flag_spec_F77=-rdynamic
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ # hardcode_libdir_flag_spec is actually meaningless, as there is
-+ # no search path for DLLs.
-+ hardcode_libdir_flag_spec_F77=' '
-+ allow_undefined_flag_F77=unsupported
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-+ # The linker will automatically build a .lib file if we build a DLL.
-+ old_archive_From_new_cmds_F77='true'
-+ # FIXME: Should let the user specify the lib program.
-+ old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs'
-+ fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
-+ enable_shared_with_static_runtimes_F77=yes
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ case $host_os in
-+ rhapsody* | darwin1.[012])
-+ allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
-+ ;;
-+ *) # Darwin 1.3 on
-+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+ allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ else
-+ case ${MACOSX_DEPLOYMENT_TARGET} in
-+ 10.[012])
-+ allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ ;;
-+ 10.*)
-+ allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+ esac
-+ archive_cmds_need_lc_F77=no
-+ hardcode_direct_F77=no
-+ hardcode_automatic_F77=yes
-+ hardcode_shlibpath_var_F77=unsupported
-+ whole_archive_flag_spec_F77=''
-+ link_all_deplibs_F77=yes
-+ if test "$GCC" = yes ; then
-+ output_verbose_link_cmd='echo'
-+ archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+ module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ else
-+ case $cc_basename in
-+ xlc*)
-+ output_verbose_link_cmd='echo'
-+ archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
-+ module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ ;;
-+ *)
-+ ld_shlibs_F77=no
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ dgux*)
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ freebsd1*)
-+ ld_shlibs_F77=no
-+ ;;
-+
-+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-+ # support. Future versions do this automatically, but an explicit c++rt0.o
-+ # does not break anything, and helps significantly (at the cost of a little
-+ # extra space).
-+ freebsd2.2*)
-+ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-+ hardcode_libdir_flag_spec_F77='-R$libdir'
-+ hardcode_direct_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-+ freebsd2*)
-+ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_F77=yes
-+ hardcode_minus_L_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-+ freebsd* | dragonfly*)
-+ archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec_F77='-R$libdir'
-+ hardcode_direct_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ # GNU/kFreeBSD uses gcc -shared to do shared libraries.
-+ kfreebsd*-gnu)
-+ archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec_F77='-R$libdir'
-+ hardcode_direct_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ link_all_deplibs_F77=no
-+ ;;
-+
-+ hpux9*)
-+ if test "$GCC" = yes; then
-+ archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ else
-+ archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ fi
-+ hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_F77=:
-+ hardcode_direct_F77=yes
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L_F77=yes
-+ export_dynamic_flag_spec_F77='${wl}-E'
-+ ;;
-+
-+ hpux10*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_F77=:
-+
-+ hardcode_direct_F77=yes
-+ export_dynamic_flag_spec_F77='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L_F77=yes
-+ fi
-+ ;;
-+
-+ hpux11*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ else
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_F77=:
-+
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ hardcode_libdir_flag_spec_ld_F77='+b $libdir'
-+ hardcode_direct_F77=no
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+ *)
-+ hardcode_direct_F77=yes
-+ export_dynamic_flag_spec_F77='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L_F77=yes
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ if test "$GCC" = yes; then
-+ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
-+ fi
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_F77=:
-+ link_all_deplibs_F77=yes
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-+ else
-+ archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-+ fi
-+ hardcode_libdir_flag_spec_F77='-R$libdir'
-+ hardcode_direct_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ newsos6)
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_F77=yes
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_F77=:
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ openbsd*)
-+ hardcode_direct_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec_F77='${wl}-E'
-+ else
-+ case $host_os in
-+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-+ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec_F77='-R$libdir'
-+ ;;
-+ *)
-+ archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ os2*)
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_minus_L_F77=yes
-+ allow_undefined_flag_F77=unsupported
-+ archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-+ old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-+ ;;
-+
-+ osf3*)
-+ if test "$GCC" = yes; then
-+ allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ allow_undefined_flag_F77=' -expect_unresolved \*'
-+ archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ fi
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_F77=:
-+ ;;
-+
-+ osf4* | osf5*) # as osf3* with the addition of -msym flag
-+ if test "$GCC" = yes; then
-+ allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-+ else
-+ allow_undefined_flag_F77=' -expect_unresolved \*'
-+ archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-+
-+ # Both c and cxx compiler support -rpath directly
-+ hardcode_libdir_flag_spec_F77='-rpath $libdir'
-+ fi
-+ hardcode_libdir_separator_F77=:
-+ ;;
-+
-+ solaris*)
-+ no_undefined_flag_F77=' -z text'
-+ if test "$GCC" = yes; then
-+ wlarc='${wl}'
-+ archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-+ else
-+ wlarc=''
-+ archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-+ fi
-+ hardcode_libdir_flag_spec_F77='-R$libdir'
-+ hardcode_shlibpath_var_F77=no
-+ case $host_os in
-+ solaris2.[0-5] | solaris2.[0-5].*) ;;
-+ *)
-+ # The compiler driver will combine linker options so we
-+ # cannot just pass the convience library names through
-+ # without $wl, iff we do not link with $LD.
-+ # Luckily, gcc supports the same syntax we need for Sun Studio.
-+ # Supported since Solaris 2.6 (maybe 2.5.1?)
-+ case $wlarc in
-+ '')
-+ whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;;
-+ *)
-+ whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
-+ esac ;;
-+ esac
-+ link_all_deplibs_F77=yes
-+ ;;
-+
-+ sunos4*)
-+ if test "x$host_vendor" = xsequent; then
-+ # Use $CC to link under sequent, because it throws in some extra .o
-+ # files that make .init and .fini sections work.
-+ archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_direct_F77=yes
-+ hardcode_minus_L_F77=yes
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ sysv4)
-+ case $host_vendor in
-+ sni)
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_F77=yes # is this really true???
-+ ;;
-+ siemens)
-+ ## LD is ld it makes a PLAMLIB
-+ ## CC just makes a GrossModule.
-+ archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+ reload_cmds_F77='$CC -r -o $output$reload_objs'
-+ hardcode_direct_F77=no
-+ ;;
-+ motorola)
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
-+ ;;
-+ esac
-+ runpath_var='LD_RUN_PATH'
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ sysv4.3*)
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_shlibpath_var_F77=no
-+ export_dynamic_flag_spec_F77='-Bexport'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_shlibpath_var_F77=no
-+ runpath_var=LD_RUN_PATH
-+ hardcode_runpath_var=yes
-+ ld_shlibs_F77=yes
-+ fi
-+ ;;
-+
-+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
-+ no_undefined_flag_F77='${wl}-z,text'
-+ archive_cmds_need_lc_F77=no
-+ hardcode_shlibpath_var_F77=no
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6*)
-+ # Note: We can NOT use -z defs as we might desire, because we do not
-+ # link with -lc, and that would cause any symbols used from libc to
-+ # always be unresolved, which means just about no library would
-+ # ever link correctly. If we're not using GNU ld we use -z text
-+ # though, which does catch some bad symbols but isn't as heavy-handed
-+ # as -z defs.
-+ no_undefined_flag_F77='${wl}-z,text'
-+ allow_undefined_flag_F77='${wl}-z,nodefs'
-+ archive_cmds_need_lc_F77=no
-+ hardcode_shlibpath_var_F77=no
-+ hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+ hardcode_libdir_separator_F77=':'
-+ link_all_deplibs_F77=yes
-+ export_dynamic_flag_spec_F77='${wl}-Bexport'
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-+
-+ uts4*)
-+ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec_F77='-L$libdir'
-+ hardcode_shlibpath_var_F77=no
-+ ;;
-+
-+ *)
-+ ld_shlibs_F77=no
-+ ;;
-+ esac
-+ fi
-+
-+echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
-+echo "${ECHO_T}$ld_shlibs_F77" >&6
-+test "$ld_shlibs_F77" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$archive_cmds_need_lc_F77" in
-+x|xyes)
-+ # Assume -lc should be added
-+ archive_cmds_need_lc_F77=yes
-+
-+ if test "$enable_shared" = yes && test "$GCC" = yes; then
-+ case $archive_cmds_F77 in
-+ *'~'*)
-+ # FIXME: we may have to deal with multi-command sequences.
-+ ;;
-+ '$CC '*)
-+ # Test whether the compiler implicitly links with -lc since on some
-+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+ # to ld, don't add -lc before -lgcc.
-+ echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
-+ $rm conftest*
-+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } 2>conftest.err; then
-+ soname=conftest
-+ lib=conftest
-+ libobjs=conftest.$ac_objext
-+ deplibs=
-+ wl=$lt_prog_compiler_wl_F77
-+ pic_flag=$lt_prog_compiler_pic_F77
-+ compiler_flags=-v
-+ linker_flags=-v
-+ verstring=
-+ output_objdir=.
-+ libname=conftest
-+ lt_save_allow_undefined_flag=$allow_undefined_flag_F77
-+ allow_undefined_flag_F77=
-+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+ (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+ then
-+ archive_cmds_need_lc_F77=no
-+ else
-+ archive_cmds_need_lc_F77=yes
-+ fi
-+ allow_undefined_flag_F77=$lt_save_allow_undefined_flag
-+ else
-+ cat conftest.err 1>&5
-+ fi
-+ $rm conftest*
-+ echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
-+echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6
-+ ;;
-+ esac
-+ fi
-+ ;;
-+esac
-+
-+echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+if test "$GCC" = yes; then
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-+ # if the path contains ";" then we assume it to be the separator
-+ # otherwise default to the standard path separator (i.e. ":") - it is
-+ # assumed that no part of a normal pathname contains ";" but that should
-+ # okay in the real world where ";" in dirpaths is itself problematic.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+else
-+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-+fi
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+ shlibpath_var=LIBPATH
-+
-+ # AIX 3 has no versioning support, so we append a major version to the name.
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+
-+aix4* | aix5*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ hardcode_into_libs=yes
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 supports IA64
-+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ else
-+ # With GCC up to 2.95.x, collect2 would create an import file
-+ # for dependence libraries. The import file would start with
-+ # the line `#! .'. This would cause the generated library to
-+ # depend on `.', always an invalid library. This was fixed in
-+ # development snapshots of GCC prior to 3.0.
-+ case $host_os in
-+ aix4 | aix4.[01] | aix4.[01].*)
-+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+ echo ' yes '
-+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+ :
-+ else
-+ can_build_shared=no
-+ fi
-+ ;;
-+ esac
-+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+ # soname into executable. Probably we can add versioning support to
-+ # collect2, so additional links can be useful in future.
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+ # instead of lib<name>.a to let people know that these are not
-+ # typical AIX shared libraries.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ else
-+ # We preserve .a as extension for shared libraries through AIX4.2
-+ # and later when we are not doing run time linking.
-+ library_names_spec='${libname}${release}.a $libname.a'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ fi
-+ shlibpath_var=LIBPATH
-+ fi
-+ ;;
-+
-+amigaos*)
-+ library_names_spec='$libname.ixlibrary $libname.a'
-+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+ ;;
-+
-+beos*)
-+ library_names_spec='${libname}${shared_ext}'
-+ dynamic_linker="$host_os ld.so"
-+ shlibpath_var=LIBRARY_PATH
-+ ;;
-+
-+bsdi[45]*)
-+ version_type=linux
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+ # the default ld.so.conf also contains /usr/contrib/lib and
-+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+ # libtool to hard-code these into programs
-+ ;;
-+
-+cygwin* | mingw* | pw32*)
-+ version_type=windows
-+ shrext_cmds=".dll"
-+ need_version=no
-+ need_lib_prefix=no
-+
-+ case $GCC,$host_os in
-+ yes,cygwin* | yes,mingw* | yes,pw32*)
-+ library_names_spec='$libname.dll.a'
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname~
-+ chmod a+x \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $rm \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+
-+ case $host_os in
-+ cygwin*)
-+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+ ;;
-+ mingw*)
-+ # MinGW DLLs use traditional 'lib' prefix
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-+ # It is most probably a Windows format PATH printed by
-+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+ # path with ; separators, and with drive letters. We can handle the
-+ # drive letters (cygwin fileutils understands them), so leave them,
-+ # especially as we might pass files found there to a mingw objdump,
-+ # which wouldn't understand a cygwinified path. Ahh.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ ;;
-+ pw32*)
-+ # pw32 DLLs use 'pw' prefix rather than 'lib'
-+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ ;;
-+ esac
-+ dynamic_linker='Win32 ld.exe'
-+ # FIXME: first we should search . and the directory the executable is in
-+ shlibpath_var=PATH
-+ ;;
-+
-+darwin* | rhapsody*)
-+ dynamic_linker="$host_os dyld"
-+ version_type=darwin
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+ soname_spec='${libname}${release}${major}$shared_ext'
-+ shlibpath_overrides_runpath=yes
-+ shlibpath_var=DYLD_LIBRARY_PATH
-+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-+ if test "$GCC" = yes; then
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-+ else
-+ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
-+ fi
-+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+ ;;
-+
-+dgux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+freebsd1*)
-+ dynamic_linker=no
-+ ;;
-+
-+kfreebsd*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='GNU ld.so'
-+ ;;
-+
-+freebsd* | dragonfly*)
-+ # DragonFly does not have aout. When/if they implement a new
-+ # versioning mechanism, adjust this.
-+ if test -x /usr/bin/objformat; then
-+ objformat=`/usr/bin/objformat`
-+ else
-+ case $host_os in
-+ freebsd[123]*) objformat=aout ;;
-+ *) objformat=elf ;;
-+ esac
-+ fi
-+ version_type=freebsd-$objformat
-+ case $version_type in
-+ freebsd-elf*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ need_version=no
-+ need_lib_prefix=no
-+ ;;
-+ freebsd-*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+ need_version=yes
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_os in
-+ freebsd2*)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ freebsd3.[01]* | freebsdelf3.[01]*)
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+ freebsd*) # from 4.6 on
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ esac
-+ ;;
-+
-+gnu*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+ # Give a soname corresponding to the major version so that dld.sl refuses to
-+ # link against other versions.
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ case $host_cpu in
-+ ia64*)
-+ shrext_cmds='.so'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.so"
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ if test "X$HPUX_IA64_MODE" = X32; then
-+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+ else
-+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+ fi
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ hppa*64*)
-+ shrext_cmds='.sl'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ *)
-+ shrext_cmds='.sl'
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=SHLIB_PATH
-+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+ esac
-+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+ postinstall_cmds='chmod 555 $lib'
-+ ;;
-+
-+interix3*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $host_os in
-+ nonstopux*) version_type=nonstopux ;;
-+ *)
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ version_type=linux
-+ else
-+ version_type=irix
-+ fi ;;
-+ esac
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ case $host_os in
-+ irix5* | nonstopux*)
-+ libsuff= shlibsuff=
-+ ;;
-+ *)
-+ case $LD in # libtool.m4 will add one of these switches to LD
-+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+ libsuff= shlibsuff= libmagic=32-bit;;
-+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+ libsuff=32 shlibsuff=N32 libmagic=N32;;
-+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+ *) libsuff= shlibsuff= libmagic=never-match;;
-+ esac
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+ hardcode_into_libs=yes
-+ ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+ dynamic_linker=no
-+ ;;
-+
-+# This must be Linux ELF.
-+linux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ # This implies no fast_install, which is unacceptable.
-+ # Some rework will be needed to allow for fast_install
-+ # before this can be enabled.
-+ hardcode_into_libs=yes
-+
-+ # Append ld.so.conf contents to the search path
-+ if test -f /etc/ld.so.conf; then
-+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+ fi
-+
-+ # We used to test for /lib/ld.so.1 and disable shared libraries on
-+ # powerpc, because MkLinux only supported shared libraries with the
-+ # GNU dynamic linker. Since this was broken with cross compilers,
-+ # most powerpc-linux boxes support dynamic linking these days and
-+ # people can always --disable-shared, the test was removed, and we
-+ # assume the GNU/Linux dynamic linker is in use.
-+ dynamic_linker='GNU/Linux ld.so'
-+ ;;
-+
-+netbsdelf*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='NetBSD ld.elf_so'
-+ ;;
-+
-+knetbsd*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='GNU ld.so'
-+ ;;
-+
-+netbsd*)
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ dynamic_linker='NetBSD (a.out) ld.so'
-+ else
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='NetBSD ld.elf_so'
-+ fi
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+
-+newsos6)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+nto-qnx*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+openbsd*)
-+ version_type=sunos
-+ sys_lib_dlsearch_path_spec="/usr/lib"
-+ need_lib_prefix=no
-+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+ case $host_os in
-+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+ *) need_version=no ;;
-+ esac
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ case $host_os in
-+ openbsd2.[89] | openbsd2.[89].*)
-+ shlibpath_overrides_runpath=no
-+ ;;
-+ *)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ esac
-+ else
-+ shlibpath_overrides_runpath=yes
-+ fi
-+ ;;
-+
-+os2*)
-+ libname_spec='$name'
-+ shrext_cmds=".dll"
-+ need_lib_prefix=no
-+ library_names_spec='$libname${shared_ext} $libname.a'
-+ dynamic_linker='OS/2 ld.exe'
-+ shlibpath_var=LIBPATH
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ version_type=osf
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+ ;;
-+
-+solaris*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ # ldd complains unless libraries are executable
-+ postinstall_cmds='chmod +x $lib'
-+ ;;
-+
-+sunos4*)
-+ version_type=sunos
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ if test "$with_gnu_ld" = yes; then
-+ need_lib_prefix=no
-+ fi
-+ need_version=yes
-+ ;;
-+
-+sysv4 | sysv4.3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_vendor in
-+ sni)
-+ shlibpath_overrides_runpath=no
-+ need_lib_prefix=no
-+ export_dynamic_flag_spec='${wl}-Blargedynsym'
-+ runpath_var=LD_RUN_PATH
-+ ;;
-+ siemens)
-+ need_lib_prefix=no
-+ ;;
-+ motorola)
-+ need_lib_prefix=no
-+ need_version=no
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+ ;;
-+ esac
-+ ;;
-+
-+sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ version_type=linux
-+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+ soname_spec='$libname${shared_ext}.$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ fi
-+ ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+ version_type=freebsd-elf
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ if test "$with_gnu_ld" = yes; then
-+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+ shlibpath_overrides_runpath=no
-+ else
-+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+ shlibpath_overrides_runpath=yes
-+ case $host_os in
-+ sco3.2v5*)
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+ ;;
-+ esac
-+ fi
-+ sys_lib_dlsearch_path_spec='/usr/lib'
-+ ;;
-+
-+uts4*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+*)
-+ dynamic_linker=no
-+ ;;
-+esac
-+echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
-+hardcode_action_F77=
-+if test -n "$hardcode_libdir_flag_spec_F77" || \
-+ test -n "$runpath_var_F77" || \
-+ test "X$hardcode_automatic_F77" = "Xyes" ; then
-+
-+ # We can hardcode non-existant directories.
-+ if test "$hardcode_direct_F77" != no &&
-+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+ # have to relink, otherwise we might link with an installed library
-+ # when we should be linking with a yet-to-be-installed one
-+ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
-+ test "$hardcode_minus_L_F77" != no; then
-+ # Linking always hardcodes the temporary library directory.
-+ hardcode_action_F77=relink
-+ else
-+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+ hardcode_action_F77=immediate
-+ fi
-+else
-+ # We cannot hardcode anything, or else we can only hardcode existing
-+ # directories.
-+ hardcode_action_F77=unsupported
-+fi
-+echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
-+echo "${ECHO_T}$hardcode_action_F77" >&6
-+
-+if test "$hardcode_action_F77" = relink; then
-+ # Fast installation is not supported
-+ enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+ test "$enable_shared" = no; then
-+ # Fast installation is not necessary
-+ enable_fast_install=needless
-+fi
-+
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+ # See if we are running on zsh, and set the options which allow our commands through
-+ # without removal of \ escapes.
-+ if test -n "${ZSH_VERSION+set}" ; then
-+ setopt NO_GLOB_SUBST
-+ fi
-+ # Now quote all the things that may contain metacharacters while being
-+ # careful not to overquote the AC_SUBSTed values. We take copies of the
-+ # variables and quote the copies for generation of the libtool script.
-+ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+ SED SHELL STRIP \
-+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+ deplibs_check_method reload_flag reload_cmds need_locks \
-+ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+ lt_cv_sys_global_symbol_to_c_name_address \
-+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+ old_postinstall_cmds old_postuninstall_cmds \
-+ compiler_F77 \
-+ CC_F77 \
-+ LD_F77 \
-+ lt_prog_compiler_wl_F77 \
-+ lt_prog_compiler_pic_F77 \
-+ lt_prog_compiler_static_F77 \
-+ lt_prog_compiler_no_builtin_flag_F77 \
-+ export_dynamic_flag_spec_F77 \
-+ thread_safe_flag_spec_F77 \
-+ whole_archive_flag_spec_F77 \
-+ enable_shared_with_static_runtimes_F77 \
-+ old_archive_cmds_F77 \
-+ old_archive_from_new_cmds_F77 \
-+ predep_objects_F77 \
-+ postdep_objects_F77 \
-+ predeps_F77 \
-+ postdeps_F77 \
-+ compiler_lib_search_path_F77 \
-+ archive_cmds_F77 \
-+ archive_expsym_cmds_F77 \
-+ postinstall_cmds_F77 \
-+ postuninstall_cmds_F77 \
-+ old_archive_from_expsyms_cmds_F77 \
-+ allow_undefined_flag_F77 \
-+ no_undefined_flag_F77 \
-+ export_symbols_cmds_F77 \
-+ hardcode_libdir_flag_spec_F77 \
-+ hardcode_libdir_flag_spec_ld_F77 \
-+ hardcode_libdir_separator_F77 \
-+ hardcode_automatic_F77 \
-+ module_cmds_F77 \
-+ module_expsym_cmds_F77 \
-+ lt_cv_prog_compiler_c_o_F77 \
-+ exclude_expsyms_F77 \
-+ include_expsyms_F77; do
-+
-+ case $var in
-+ old_archive_cmds_F77 | \
-+ old_archive_from_new_cmds_F77 | \
-+ archive_cmds_F77 | \
-+ archive_expsym_cmds_F77 | \
-+ module_cmds_F77 | \
-+ module_expsym_cmds_F77 | \
-+ old_archive_from_expsyms_cmds_F77 | \
-+ export_symbols_cmds_F77 | \
-+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+ postinstall_cmds | postuninstall_cmds | \
-+ old_postinstall_cmds | old_postuninstall_cmds | \
-+ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+ # Double-quote double-evaled strings.
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+ ;;
-+ *)
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+ ;;
-+ esac
-+ done
-+
-+ case $lt_echo in
-+ *'\$0 --fallback-echo"')
-+ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+ ;;
-+ esac
-+
-+cfgfile="$ofile"
-+
-+ cat <<__EOF__ >> "$cfgfile"
-+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc_F77
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler_F77
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC_F77
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD_F77
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_F77
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic_F77
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static_F77
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names. First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds_F77
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds_F77
-+archive_expsym_cmds=$lt_archive_expsym_cmds_F77
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds_F77
-+module_expsym_cmds=$lt_module_expsym_cmds_F77
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects_F77
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects_F77
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps_F77
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps_F77
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path_F77
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag_F77
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag_F77
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action_F77
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct_F77
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L_F77
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic_F77
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs_F77
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path="$fix_srcfile_path_F77"
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols_F77
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds_F77
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms_F77
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms_F77
-+
-+# ### END LIBTOOL TAG CONFIG: $tagname
-+
-+__EOF__
-+
-+
-+else
-+ # If there is no Makefile yet, we rely on a make rule to execute
-+ # `config.status --recheck' to rerun these tests and create the
-+ # libtool script then.
-+ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+ if test -f "$ltmain_in"; then
-+ test -f Makefile && make "$ltmain"
-+ fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC="$lt_save_CC"
-+
-+ else
-+ tagname=""
-+ fi
-+ ;;
-+
-+ GCJ)
-+ if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-+
-+
-+
-+# Source file extension for Java test sources.
-+ac_ext=java
-+
-+# Object file extension for compiled Java test sources.
-+objext=o
-+objext_GCJ=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code="class foo {}\n"
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+printf "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${GCJ-"gcj"}
-+compiler=$CC
-+compiler_GCJ=$CC
-+for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+
-+# GCJ did not exist at the time GCC didn't implicitly link libc in.
-+archive_cmds_need_lc_GCJ=no
-+
-+old_archive_cmds_GCJ=$old_archive_cmds
-+
-+
-+lt_prog_compiler_no_builtin_flag_GCJ=
-+
-+if test "$GCC" = yes; then
-+ lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
-+
-+
-+echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
-+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_rtti_exceptions=no
-+ ac_outfile=conftest.$ac_objext
-+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="-fno-rtti -fno-exceptions"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:15157: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&5
-+ echo "$as_me:15161: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings other than the usual output.
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_rtti_exceptions=yes
-+ fi
-+ fi
-+ $rm conftest*
-+
-+fi
-+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
-+
-+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-+ lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
-+else
-+ :
-+fi
-+
-+fi
-+
-+lt_prog_compiler_wl_GCJ=
-+lt_prog_compiler_pic_GCJ=
-+lt_prog_compiler_static_GCJ=
-+
-+echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
-+
-+ if test "$GCC" = yes; then
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ lt_prog_compiler_static_GCJ='-static'
-+
-+ case $host_os in
-+ aix*)
-+ # All AIX code is PIC.
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ # FIXME: we need at least 68020 code to build shared libraries, but
-+ # adding the `-m68020' flag to GCC prevents building anything better,
-+ # like `-m68040'.
-+ lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
-+ ;;
-+
-+ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-+ # PIC is the default for these OSes.
-+ ;;
-+
-+ mingw* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ lt_prog_compiler_pic_GCJ='-fno-common'
-+ ;;
-+
-+ interix3*)
-+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-+ # Instead, we relocate shared libraries at runtime.
-+ ;;
-+
-+ msdosdjgpp*)
-+ # Just because we use GCC doesn't mean we suddenly get shared libraries
-+ # on systems that don't support them.
-+ lt_prog_compiler_can_build_shared_GCJ=no
-+ enable_shared=no
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ lt_prog_compiler_pic_GCJ=-Kconform_pic
-+ fi
-+ ;;
-+
-+ hpux*)
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_GCJ='-fPIC'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ lt_prog_compiler_pic_GCJ='-fPIC'
-+ ;;
-+ esac
-+ else
-+ # PORTME Check for flag to pass linker flags through the system compiler.
-+ case $host_os in
-+ aix*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 now supports IA64 processor
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ else
-+ lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
-+ fi
-+ ;;
-+ darwin*)
-+ # PIC is the default on this platform
-+ # Common symbols not allowed in MH_DYLIB files
-+ case $cc_basename in
-+ xlc*)
-+ lt_prog_compiler_pic_GCJ='-qnocommon'
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ ;;
-+ esac
-+ ;;
-+
-+ mingw* | pw32* | os2*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
-+ ;;
-+
-+ hpux9* | hpux10* | hpux11*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-+ # not for PA HP-UX.
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ # +Z the default
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_GCJ='+Z'
-+ ;;
-+ esac
-+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
-+ lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ # PIC (with -KPIC) is the default.
-+ lt_prog_compiler_static_GCJ='-non_shared'
-+ ;;
-+
-+ newsos6)
-+ lt_prog_compiler_pic_GCJ='-KPIC'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ ;;
-+
-+ linux*)
-+ case $cc_basename in
-+ icc* | ecc*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ lt_prog_compiler_pic_GCJ='-KPIC'
-+ lt_prog_compiler_static_GCJ='-static'
-+ ;;
-+ pgcc* | pgf77* | pgf90* | pgf95*)
-+ # Portland Group compilers (*not* the Pentium gcc compiler,
-+ # which looks to be a dead project)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ lt_prog_compiler_pic_GCJ='-fpic'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ ;;
-+ ccc*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ # All Alpha code is PIC.
-+ lt_prog_compiler_static_GCJ='-non_shared'
-+ ;;
-+ esac
-+ ;;
-+
-+ osf3* | osf4* | osf5*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ # All OSF/1 code is PIC.
-+ lt_prog_compiler_static_GCJ='-non_shared'
-+ ;;
-+
-+ solaris*)
-+ lt_prog_compiler_pic_GCJ='-KPIC'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ case $cc_basename in
-+ f77* | f90* | f95*)
-+ lt_prog_compiler_wl_GCJ='-Qoption ld ';;
-+ *)
-+ lt_prog_compiler_wl_GCJ='-Wl,';;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ lt_prog_compiler_wl_GCJ='-Qoption ld '
-+ lt_prog_compiler_pic_GCJ='-PIC'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ ;;
-+
-+ sysv4 | sysv4.2uw2* | sysv4.3*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ lt_prog_compiler_pic_GCJ='-KPIC'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ lt_prog_compiler_pic_GCJ='-Kconform_pic'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ fi
-+ ;;
-+
-+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ lt_prog_compiler_pic_GCJ='-KPIC'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ ;;
-+
-+ unicos*)
-+ lt_prog_compiler_wl_GCJ='-Wl,'
-+ lt_prog_compiler_can_build_shared_GCJ=no
-+ ;;
-+
-+ uts4*)
-+ lt_prog_compiler_pic_GCJ='-pic'
-+ lt_prog_compiler_static_GCJ='-Bstatic'
-+ ;;
-+
-+ *)
-+ lt_prog_compiler_can_build_shared_GCJ=no
-+ ;;
-+ esac
-+ fi
-+
-+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6
-+
-+#
-+# Check to make sure the PIC flag actually works.
-+#
-+if test -n "$lt_prog_compiler_pic_GCJ"; then
-+
-+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
-+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6
-+if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_prog_compiler_pic_works_GCJ=no
-+ ac_outfile=conftest.$ac_objext
-+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-+ lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ # The option is referenced via a variable to avoid confusing sed.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:15425: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>conftest.err)
-+ ac_status=$?
-+ cat conftest.err >&5
-+ echo "$as_me:15429: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s "$ac_outfile"; then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings other than the usual output.
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_prog_compiler_pic_works_GCJ=yes
-+ fi
-+ fi
-+ $rm conftest*
-+
-+fi
-+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5
-+echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6
-+
-+if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then
-+ case $lt_prog_compiler_pic_GCJ in
-+ "" | " "*) ;;
-+ *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
-+ esac
-+else
-+ lt_prog_compiler_pic_GCJ=
-+ lt_prog_compiler_can_build_shared_GCJ=no
-+fi
-+
-+fi
-+case $host_os in
-+ # For platforms which do not support PIC, -DPIC is meaningless:
-+ *djgpp*)
-+ lt_prog_compiler_pic_GCJ=
-+ ;;
-+ *)
-+ lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
-+ ;;
-+esac
-+
-+#
-+# Check to make sure the static flag actually works.
-+#
-+wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
-+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
-+if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_prog_compiler_static_works_GCJ=no
-+ save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-+ printf "$lt_simple_link_test_code" > conftest.$ac_ext
-+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-+ # The linker can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ if test -s conftest.err; then
-+ # Append any errors to the config.log.
-+ cat conftest.err 1>&5
-+ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-+ if diff conftest.exp conftest.er2 >/dev/null; then
-+ lt_prog_compiler_static_works_GCJ=yes
-+ fi
-+ else
-+ lt_prog_compiler_static_works_GCJ=yes
-+ fi
-+ fi
-+ $rm conftest*
-+ LDFLAGS="$save_LDFLAGS"
-+
-+fi
-+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5
-+echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6
-+
-+if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then
-+ :
-+else
-+ lt_prog_compiler_static_GCJ=
-+fi
-+
-+
-+echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
-+if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ lt_cv_prog_compiler_c_o_GCJ=no
-+ $rm -r conftest 2>/dev/null
-+ mkdir conftest
-+ cd conftest
-+ mkdir out
-+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ lt_compiler_flag="-o out/conftest2.$ac_objext"
-+ # Insert the option either (1) after the last *FLAGS variable, or
-+ # (2) before a word containing "conftest.", or (3) at the end.
-+ # Note that $ac_compile itself does not contain backslashes and begins
-+ # with a dollar sign (not a hyphen), so the echo should work correctly.
-+ lt_compile=`echo "$ac_compile" | $SED \
-+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-+ -e 's:$: $lt_compiler_flag:'`
-+ (eval echo "\"\$as_me:15529: $lt_compile\"" >&5)
-+ (eval "$lt_compile" 2>out/conftest.err)
-+ ac_status=$?
-+ cat out/conftest.err >&5
-+ echo "$as_me:15533: \$? = $ac_status" >&5
-+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
-+ then
-+ # The compiler can only warn and ignore the option if not recognized
-+ # So say no if there are warnings
-+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-+ lt_cv_prog_compiler_c_o_GCJ=yes
-+ fi
-+ fi
-+ chmod u+w . 2>&5
-+ $rm conftest*
-+ # SGI C++ compiler will create directory out/ii_files/ for
-+ # template instantiation
-+ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-+ $rm out/* && rmdir out
-+ cd ..
-+ rmdir conftest
-+ $rm conftest*
-+
-+fi
-+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
-+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6
-+
-+
-+hard_links="nottested"
-+if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
-+ # do not overwrite the value of need_locks provided by the user
-+ echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
-+ hard_links=yes
-+ $rm conftest*
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ touch conftest.a
-+ ln conftest.a conftest.b 2>&5 || hard_links=no
-+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
-+ echo "$as_me:$LINENO: result: $hard_links" >&5
-+echo "${ECHO_T}$hard_links" >&6
-+ if test "$hard_links" = no; then
-+ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-+ need_locks=warn
-+ fi
-+else
-+ need_locks=no
-+fi
-+
-+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
-+
-+ runpath_var=
-+ allow_undefined_flag_GCJ=
-+ enable_shared_with_static_runtimes_GCJ=no
-+ archive_cmds_GCJ=
-+ archive_expsym_cmds_GCJ=
-+ old_archive_From_new_cmds_GCJ=
-+ old_archive_from_expsyms_cmds_GCJ=
-+ export_dynamic_flag_spec_GCJ=
-+ whole_archive_flag_spec_GCJ=
-+ thread_safe_flag_spec_GCJ=
-+ hardcode_libdir_flag_spec_GCJ=
-+ hardcode_libdir_flag_spec_ld_GCJ=
-+ hardcode_libdir_separator_GCJ=
-+ hardcode_direct_GCJ=no
-+ hardcode_minus_L_GCJ=no
-+ hardcode_shlibpath_var_GCJ=unsupported
-+ link_all_deplibs_GCJ=unknown
-+ hardcode_automatic_GCJ=no
-+ module_cmds_GCJ=
-+ module_expsym_cmds_GCJ=
-+ always_export_symbols_GCJ=no
-+ export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ # include_expsyms should be a list of space-separated symbols to be *always*
-+ # included in the symbol list
-+ include_expsyms_GCJ=
-+ # exclude_expsyms can be an extended regexp of symbols to exclude
-+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
-+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-+ # as well as any symbol that contains `d'.
-+ exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_"
-+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-+ # platforms (ab)use it in PIC code, but their linkers get confused if
-+ # the symbol is explicitly referenced. Since portable code cannot
-+ # rely on this symbol name, it's probably fine to never include it in
-+ # preloaded symbol tables.
-+ extract_expsyms_cmds=
-+ # Just being paranoid about ensuring that cc_basename is set.
-+ for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+ case $host_os in
-+ cygwin* | mingw* | pw32*)
-+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ if test "$GCC" != yes; then
-+ with_gnu_ld=no
-+ fi
-+ ;;
-+ interix*)
-+ # we just hope/assume this is gcc and not c89 (= MSVC++)
-+ with_gnu_ld=yes
-+ ;;
-+ openbsd*)
-+ with_gnu_ld=no
-+ ;;
-+ esac
-+
-+ ld_shlibs_GCJ=yes
-+ if test "$with_gnu_ld" = yes; then
-+ # If archive_cmds runs LD, not CC, wlarc should be empty
-+ wlarc='${wl}'
-+
-+ # Set some defaults for GNU ld with shared library support. These
-+ # are reset later if shared libraries are not supported. Putting them
-+ # here allows them to be overridden if necessary.
-+ runpath_var=LD_RUN_PATH
-+ hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
-+ export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
-+ # ancient GNU ld didn't support --whole-archive et. al.
-+ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-+ whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-+ else
-+ whole_archive_flag_spec_GCJ=
-+ fi
-+ supports_anon_versioning=no
-+ case `$LD -v 2>/dev/null` in
-+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-+ *\ 2.11.*) ;; # other 2.11 versions
-+ *) supports_anon_versioning=yes ;;
-+ esac
-+
-+ # See if GNU ld supports shared libraries.
-+ case $host_os in
-+ aix3* | aix4* | aix5*)
-+ # On AIX/PPC, the GNU linker is very broken
-+ if test "$host_cpu" != ia64; then
-+ ld_shlibs_GCJ=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-+*** to be unable to reliably create shared libraries on AIX.
-+*** Therefore, libtool is disabling shared libraries support. If you
-+*** really care for shared libraries, you may want to modify your PATH
-+*** so that a non-GNU linker is found, and then restart.
-+
-+EOF
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_minus_L_GCJ=yes
-+
-+ # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-+ # that the semantics of dynamic libraries on AmigaOS, at least up
-+ # to version 4, is to share data among multiple programs linked
-+ # with the same dynamic library. Since this doesn't match the
-+ # behavior of shared libraries on other platforms, we can't use
-+ # them.
-+ ld_shlibs_GCJ=no
-+ ;;
-+
-+ beos*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ allow_undefined_flag_GCJ=unsupported
-+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-+ # support --undefined. This deserves some investigation. FIXME
-+ archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ else
-+ ld_shlibs_GCJ=no
-+ fi
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
-+ # as there is no search path for DLLs.
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ allow_undefined_flag_GCJ=unsupported
-+ always_export_symbols_GCJ=no
-+ enable_shared_with_static_runtimes_GCJ=yes
-+ export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
-+
-+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-+ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ # If the export-symbols file already is a .def file (1st line
-+ # is EXPORTS), use it as is; otherwise, prepend...
-+ archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname.def;
-+ else
-+ echo EXPORTS > $output_objdir/$soname.def;
-+ cat $export_symbols >> $output_objdir/$soname.def;
-+ fi~
-+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ else
-+ ld_shlibs_GCJ=no
-+ fi
-+ ;;
-+
-+ interix3*)
-+ hardcode_direct_GCJ=no
-+ hardcode_shlibpath_var_GCJ=no
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec_GCJ='${wl}-E'
-+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-+ # Instead, shared libraries are loaded at an image base (0x10000000 by
-+ # default) and relocated if they conflict, which is a slow very memory
-+ # consuming and fragmenting process. To avoid this, we pick a random,
-+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
-+ archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-+ ;;
-+
-+ linux*)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ tmp_addflag=
-+ case $cc_basename,$host_cpu in
-+ pgcc*) # Portland Group C compiler
-+ whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag'
-+ ;;
-+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
-+ whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-+ tmp_addflag=' $pic_flag -Mnomain' ;;
-+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
-+ tmp_addflag=' -i_dynamic' ;;
-+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
-+ tmp_addflag=' -i_dynamic -nofor_main' ;;
-+ ifc* | ifort*) # Intel Fortran compiler
-+ tmp_addflag=' -nofor_main' ;;
-+ esac
-+ archive_cmds_GCJ='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+
-+ if test $supports_anon_versioning = yes; then
-+ archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
-+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-+ $echo "local: *; };" >> $output_objdir/$libname.ver~
-+ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-+ fi
-+ link_all_deplibs_GCJ=no
-+ else
-+ ld_shlibs_GCJ=no
-+ fi
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-+ wlarc=
-+ else
-+ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ fi
-+ ;;
-+
-+ solaris*)
-+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-+ ld_shlibs_GCJ=no
-+ cat <<EOF 1>&2
-+
-+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-+*** create shared libraries on Solaris systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.9.1 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+EOF
-+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ ld_shlibs_GCJ=no
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-+ case `$LD -v 2>&1` in
-+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-+ ld_shlibs_GCJ=no
-+ cat <<_LT_EOF 1>&2
-+
-+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-+*** reliably create shared libraries on SCO systems. Therefore, libtool
-+*** is disabling shared libraries support. We urge you to upgrade GNU
-+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-+*** your PATH or compiler configuration so that the native linker is
-+*** used, and then restart.
-+
-+_LT_EOF
-+ ;;
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-+ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-+ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-+ else
-+ ld_shlibs_GCJ=no
-+ fi
-+ ;;
-+ esac
-+ ;;
-+
-+ sunos4*)
-+ archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ wlarc=
-+ hardcode_direct_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ *)
-+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-+ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ else
-+ ld_shlibs_GCJ=no
-+ fi
-+ ;;
-+ esac
-+
-+ if test "$ld_shlibs_GCJ" = no; then
-+ runpath_var=
-+ hardcode_libdir_flag_spec_GCJ=
-+ export_dynamic_flag_spec_GCJ=
-+ whole_archive_flag_spec_GCJ=
-+ fi
-+ else
-+ # PORTME fill in a description of your system's linker (not GNU ld)
-+ case $host_os in
-+ aix3*)
-+ allow_undefined_flag_GCJ=unsupported
-+ always_export_symbols_GCJ=yes
-+ archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-+ # Note: this linker hardcodes the directories in LIBPATH if there
-+ # are no directories specified by -L.
-+ hardcode_minus_L_GCJ=yes
-+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-+ # Neither direct hardcoding nor static linking is supported with a
-+ # broken collect2.
-+ hardcode_direct_GCJ=unsupported
-+ fi
-+ ;;
-+
-+ aix4* | aix5*)
-+ if test "$host_cpu" = ia64; then
-+ # On IA64, the linker does run time linking by default, so we don't
-+ # have to do anything special.
-+ aix_use_runtimelinking=no
-+ exp_sym_flag='-Bexport'
-+ no_entry_flag=""
-+ else
-+ # If we're using GNU nm, then we don't want the "-C" option.
-+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
-+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-+ export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ else
-+ export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-+ fi
-+ aix_use_runtimelinking=no
-+
-+ # Test if we are trying to use run time linking or normal
-+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-+ # need to do runtime linking.
-+ case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-+ for ld_flag in $LDFLAGS; do
-+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-+ aix_use_runtimelinking=yes
-+ break
-+ fi
-+ done
-+ ;;
-+ esac
-+
-+ exp_sym_flag='-bexport'
-+ no_entry_flag='-bnoentry'
-+ fi
-+
-+ # When large executables or shared objects are built, AIX ld can
-+ # have problems creating the table of contents. If linking a library
-+ # or program results in "error TOC overflow" add -mminimal-toc to
-+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
-+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-+
-+ archive_cmds_GCJ=''
-+ hardcode_direct_GCJ=yes
-+ hardcode_libdir_separator_GCJ=':'
-+ link_all_deplibs_GCJ=yes
-+
-+ if test "$GCC" = yes; then
-+ case $host_os in aix4.[012]|aix4.[012].*)
-+ # We only want to do this on AIX 4.2 and lower, the check
-+ # below for broken collect2 doesn't work under 4.3+
-+ collect2name=`${CC} -print-prog-name=collect2`
-+ if test -f "$collect2name" && \
-+ strings "$collect2name" | grep resolve_lib_name >/dev/null
-+ then
-+ # We have reworked collect2
-+ hardcode_direct_GCJ=yes
-+ else
-+ # We have old collect2
-+ hardcode_direct_GCJ=unsupported
-+ # It fails to find uninstalled libraries when the uninstalled
-+ # path is not listed in the libpath. Setting hardcode_minus_L
-+ # to unsupported forces relinking
-+ hardcode_minus_L_GCJ=yes
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_libdir_separator_GCJ=
-+ fi
-+ ;;
-+ esac
-+ shared_flag='-shared'
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag="$shared_flag "'${wl}-G'
-+ fi
-+ else
-+ # not using gcc
-+ if test "$host_cpu" = ia64; then
-+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-+ # chokes on -Wl,-G. The following line is correct:
-+ shared_flag='-G'
-+ else
-+ if test "$aix_use_runtimelinking" = yes; then
-+ shared_flag='${wl}-G'
-+ else
-+ shared_flag='${wl}-bM:SRE'
-+ fi
-+ fi
-+ fi
-+
-+ # It seems that -bexpall does not export symbols beginning with
-+ # underscore (_), so it is better to generate a list of symbols to export.
-+ always_export_symbols_GCJ=yes
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # Warning - without using the other runtime loading flags (-brtl),
-+ # -berok will link without error, but may produce a broken library.
-+ allow_undefined_flag_GCJ='-berok'
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`; fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-+ else
-+ if test "$host_cpu" = ia64; then
-+ hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
-+ allow_undefined_flag_GCJ="-z nodefs"
-+ archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-+ else
-+ # Determine the default libpath from the value encoded in an empty executable.
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+
-+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`
-+# Check for a 64-bit object if we didn't find anything.
-+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-+}'`; fi
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+
-+ hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-+ # Warning - without using the other run time loading flags,
-+ # -berok will link without error, but may produce a broken library.
-+ no_undefined_flag_GCJ=' ${wl}-bernotok'
-+ allow_undefined_flag_GCJ=' ${wl}-berok'
-+ # Exported symbols can be pulled into shared objects from archives
-+ whole_archive_flag_spec_GCJ='$convenience'
-+ archive_cmds_need_lc_GCJ=yes
-+ # This is similar to how AIX traditionally builds its shared libraries.
-+ archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-+ fi
-+ fi
-+ ;;
-+
-+ amigaos*)
-+ archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_minus_L_GCJ=yes
-+ # see comment about different semantics on the GNU ld section
-+ ld_shlibs_GCJ=no
-+ ;;
-+
-+ bsdi[45]*)
-+ export_dynamic_flag_spec_GCJ=-rdynamic
-+ ;;
-+
-+ cygwin* | mingw* | pw32*)
-+ # When not using gcc, we currently assume that we are using
-+ # Microsoft Visual C++.
-+ # hardcode_libdir_flag_spec is actually meaningless, as there is
-+ # no search path for DLLs.
-+ hardcode_libdir_flag_spec_GCJ=' '
-+ allow_undefined_flag_GCJ=unsupported
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-+ # The linker will automatically build a .lib file if we build a DLL.
-+ old_archive_From_new_cmds_GCJ='true'
-+ # FIXME: Should let the user specify the lib program.
-+ old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs'
-+ fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
-+ enable_shared_with_static_runtimes_GCJ=yes
-+ ;;
-+
-+ darwin* | rhapsody*)
-+ case $host_os in
-+ rhapsody* | darwin1.[012])
-+ allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
-+ ;;
-+ *) # Darwin 1.3 on
-+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-+ allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ else
-+ case ${MACOSX_DEPLOYMENT_TARGET} in
-+ 10.[012])
-+ allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-+ ;;
-+ 10.*)
-+ allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+ esac
-+ archive_cmds_need_lc_GCJ=no
-+ hardcode_direct_GCJ=no
-+ hardcode_automatic_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=unsupported
-+ whole_archive_flag_spec_GCJ=''
-+ link_all_deplibs_GCJ=yes
-+ if test "$GCC" = yes ; then
-+ output_verbose_link_cmd='echo'
-+ archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-+ module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ else
-+ case $cc_basename in
-+ xlc*)
-+ output_verbose_link_cmd='echo'
-+ archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
-+ module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-+ archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-+ ;;
-+ *)
-+ ld_shlibs_GCJ=no
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ dgux*)
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ freebsd1*)
-+ ld_shlibs_GCJ=no
-+ ;;
-+
-+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-+ # support. Future versions do this automatically, but an explicit c++rt0.o
-+ # does not break anything, and helps significantly (at the cost of a little
-+ # extra space).
-+ freebsd2.2*)
-+ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-+ hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+ hardcode_direct_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-+ freebsd2*)
-+ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_GCJ=yes
-+ hardcode_minus_L_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-+ freebsd* | dragonfly*)
-+ archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+ hardcode_direct_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ # GNU/kFreeBSD uses gcc -shared to do shared libraries.
-+ kfreebsd*-gnu)
-+ archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+ hardcode_direct_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ link_all_deplibs_GCJ=no
-+ ;;
-+
-+ hpux9*)
-+ if test "$GCC" = yes; then
-+ archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ else
-+ archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ fi
-+ hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_GCJ=:
-+ hardcode_direct_GCJ=yes
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L_GCJ=yes
-+ export_dynamic_flag_spec_GCJ='${wl}-E'
-+ ;;
-+
-+ hpux10*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_GCJ=:
-+
-+ hardcode_direct_GCJ=yes
-+ export_dynamic_flag_spec_GCJ='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L_GCJ=yes
-+ fi
-+ ;;
-+
-+ hpux11*)
-+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ else
-+ case $host_cpu in
-+ hppa*64*)
-+ archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ ia64*)
-+ archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ *)
-+ archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ ;;
-+ esac
-+ fi
-+ if test "$with_gnu_ld" = no; then
-+ hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-+ hardcode_libdir_separator_GCJ=:
-+
-+ case $host_cpu in
-+ hppa*64*|ia64*)
-+ hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
-+ hardcode_direct_GCJ=no
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+ *)
-+ hardcode_direct_GCJ=yes
-+ export_dynamic_flag_spec_GCJ='${wl}-E'
-+
-+ # hardcode_minus_L: Not really in the search PATH,
-+ # but as the default location of the library.
-+ hardcode_minus_L_GCJ=yes
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ irix5* | irix6* | nonstopux*)
-+ if test "$GCC" = yes; then
-+ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
-+ fi
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_GCJ=:
-+ link_all_deplibs_GCJ=yes
-+ ;;
-+
-+ netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
-+ else
-+ archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
-+ fi
-+ hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+ hardcode_direct_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ newsos6)
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_GCJ=yes
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_GCJ=:
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ openbsd*)
-+ hardcode_direct_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-+ export_dynamic_flag_spec_GCJ='${wl}-E'
-+ else
-+ case $host_os in
-+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-+ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+ ;;
-+ *)
-+ archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-+ ;;
-+ esac
-+ fi
-+ ;;
-+
-+ os2*)
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_minus_L_GCJ=yes
-+ allow_undefined_flag_GCJ=unsupported
-+ archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-+ old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-+ ;;
-+
-+ osf3*)
-+ if test "$GCC" = yes; then
-+ allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ else
-+ allow_undefined_flag_GCJ=' -expect_unresolved \*'
-+ archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ fi
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-+ hardcode_libdir_separator_GCJ=:
-+ ;;
-+
-+ osf4* | osf5*) # as osf3* with the addition of -msym flag
-+ if test "$GCC" = yes; then
-+ allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-+ archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-+ else
-+ allow_undefined_flag_GCJ=' -expect_unresolved \*'
-+ archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-+ archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-+
-+ # Both c and cxx compiler support -rpath directly
-+ hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
-+ fi
-+ hardcode_libdir_separator_GCJ=:
-+ ;;
-+
-+ solaris*)
-+ no_undefined_flag_GCJ=' -z text'
-+ if test "$GCC" = yes; then
-+ wlarc='${wl}'
-+ archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-+ else
-+ wlarc=''
-+ archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-+ fi
-+ hardcode_libdir_flag_spec_GCJ='-R$libdir'
-+ hardcode_shlibpath_var_GCJ=no
-+ case $host_os in
-+ solaris2.[0-5] | solaris2.[0-5].*) ;;
-+ *)
-+ # The compiler driver will combine linker options so we
-+ # cannot just pass the convience library names through
-+ # without $wl, iff we do not link with $LD.
-+ # Luckily, gcc supports the same syntax we need for Sun Studio.
-+ # Supported since Solaris 2.6 (maybe 2.5.1?)
-+ case $wlarc in
-+ '')
-+ whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;;
-+ *)
-+ whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
-+ esac ;;
-+ esac
-+ link_all_deplibs_GCJ=yes
-+ ;;
-+
-+ sunos4*)
-+ if test "x$host_vendor" = xsequent; then
-+ # Use $CC to link under sequent, because it throws in some extra .o
-+ # files that make .init and .fini sections work.
-+ archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-+ fi
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_direct_GCJ=yes
-+ hardcode_minus_L_GCJ=yes
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ sysv4)
-+ case $host_vendor in
-+ sni)
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_GCJ=yes # is this really true???
-+ ;;
-+ siemens)
-+ ## LD is ld it makes a PLAMLIB
-+ ## CC just makes a GrossModule.
-+ archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-+ reload_cmds_GCJ='$CC -r -o $output$reload_objs'
-+ hardcode_direct_GCJ=no
-+ ;;
-+ motorola)
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
-+ ;;
-+ esac
-+ runpath_var='LD_RUN_PATH'
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ sysv4.3*)
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_shlibpath_var_GCJ=no
-+ export_dynamic_flag_spec_GCJ='-Bexport'
-+ ;;
-+
-+ sysv4*MP*)
-+ if test -d /usr/nec; then
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_shlibpath_var_GCJ=no
-+ runpath_var=LD_RUN_PATH
-+ hardcode_runpath_var=yes
-+ ld_shlibs_GCJ=yes
-+ fi
-+ ;;
-+
-+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
-+ no_undefined_flag_GCJ='${wl}-z,text'
-+ archive_cmds_need_lc_GCJ=no
-+ hardcode_shlibpath_var_GCJ=no
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-+
-+ sysv5* | sco3.2v5* | sco5v6*)
-+ # Note: We can NOT use -z defs as we might desire, because we do not
-+ # link with -lc, and that would cause any symbols used from libc to
-+ # always be unresolved, which means just about no library would
-+ # ever link correctly. If we're not using GNU ld we use -z text
-+ # though, which does catch some bad symbols but isn't as heavy-handed
-+ # as -z defs.
-+ no_undefined_flag_GCJ='${wl}-z,text'
-+ allow_undefined_flag_GCJ='${wl}-z,nodefs'
-+ archive_cmds_need_lc_GCJ=no
-+ hardcode_shlibpath_var_GCJ=no
-+ hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-+ hardcode_libdir_separator_GCJ=':'
-+ link_all_deplibs_GCJ=yes
-+ export_dynamic_flag_spec_GCJ='${wl}-Bexport'
-+ runpath_var='LD_RUN_PATH'
-+
-+ if test "$GCC" = yes; then
-+ archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ else
-+ archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ fi
-+ ;;
-+
-+ uts4*)
-+ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-+ hardcode_libdir_flag_spec_GCJ='-L$libdir'
-+ hardcode_shlibpath_var_GCJ=no
-+ ;;
-+
-+ *)
-+ ld_shlibs_GCJ=no
-+ ;;
-+ esac
-+ fi
-+
-+echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
-+echo "${ECHO_T}$ld_shlibs_GCJ" >&6
-+test "$ld_shlibs_GCJ" = no && can_build_shared=no
-+
-+#
-+# Do we need to explicitly link libc?
-+#
-+case "x$archive_cmds_need_lc_GCJ" in
-+x|xyes)
-+ # Assume -lc should be added
-+ archive_cmds_need_lc_GCJ=yes
-+
-+ if test "$enable_shared" = yes && test "$GCC" = yes; then
-+ case $archive_cmds_GCJ in
-+ *'~'*)
-+ # FIXME: we may have to deal with multi-command sequences.
-+ ;;
-+ '$CC '*)
-+ # Test whether the compiler implicitly links with -lc since on some
-+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
-+ # to ld, don't add -lc before -lgcc.
-+ echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
-+ $rm conftest*
-+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-+
-+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } 2>conftest.err; then
-+ soname=conftest
-+ lib=conftest
-+ libobjs=conftest.$ac_objext
-+ deplibs=
-+ wl=$lt_prog_compiler_wl_GCJ
-+ pic_flag=$lt_prog_compiler_pic_GCJ
-+ compiler_flags=-v
-+ linker_flags=-v
-+ verstring=
-+ output_objdir=.
-+ libname=conftest
-+ lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
-+ allow_undefined_flag_GCJ=
-+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-+ (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+ then
-+ archive_cmds_need_lc_GCJ=no
-+ else
-+ archive_cmds_need_lc_GCJ=yes
-+ fi
-+ allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
-+ else
-+ cat conftest.err 1>&5
-+ fi
-+ $rm conftest*
-+ echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
-+echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6
-+ ;;
-+ esac
-+ fi
-+ ;;
-+esac
-+
-+echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
-+library_names_spec=
-+libname_spec='lib$name'
-+soname_spec=
-+shrext_cmds=".so"
-+postinstall_cmds=
-+postuninstall_cmds=
-+finish_cmds=
-+finish_eval=
-+shlibpath_var=
-+shlibpath_overrides_runpath=unknown
-+version_type=none
-+dynamic_linker="$host_os ld.so"
-+sys_lib_dlsearch_path_spec="/lib /usr/lib"
-+if test "$GCC" = yes; then
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
-+ # if the path contains ";" then we assume it to be the separator
-+ # otherwise default to the standard path separator (i.e. ":") - it is
-+ # assumed that no part of a normal pathname contains ";" but that should
-+ # okay in the real world where ";" in dirpaths is itself problematic.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+else
-+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-+fi
-+need_lib_prefix=unknown
-+hardcode_into_libs=no
-+
-+# when you set need_version to no, make sure it does not cause -set_version
-+# flags to be left without arguments
-+need_version=unknown
-+
-+case $host_os in
-+aix3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-+ shlibpath_var=LIBPATH
-+
-+ # AIX 3 has no versioning support, so we append a major version to the name.
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+
-+aix4* | aix5*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ hardcode_into_libs=yes
-+ if test "$host_cpu" = ia64; then
-+ # AIX 5 supports IA64
-+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ else
-+ # With GCC up to 2.95.x, collect2 would create an import file
-+ # for dependence libraries. The import file would start with
-+ # the line `#! .'. This would cause the generated library to
-+ # depend on `.', always an invalid library. This was fixed in
-+ # development snapshots of GCC prior to 3.0.
-+ case $host_os in
-+ aix4 | aix4.[01] | aix4.[01].*)
-+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-+ echo ' yes '
-+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-+ :
-+ else
-+ can_build_shared=no
-+ fi
-+ ;;
-+ esac
-+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-+ # soname into executable. Probably we can add versioning support to
-+ # collect2, so additional links can be useful in future.
-+ if test "$aix_use_runtimelinking" = yes; then
-+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-+ # instead of lib<name>.a to let people know that these are not
-+ # typical AIX shared libraries.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ else
-+ # We preserve .a as extension for shared libraries through AIX4.2
-+ # and later when we are not doing run time linking.
-+ library_names_spec='${libname}${release}.a $libname.a'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ fi
-+ shlibpath_var=LIBPATH
-+ fi
-+ ;;
-+
-+amigaos*)
-+ library_names_spec='$libname.ixlibrary $libname.a'
-+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
-+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-+ ;;
-+
-+beos*)
-+ library_names_spec='${libname}${shared_ext}'
-+ dynamic_linker="$host_os ld.so"
-+ shlibpath_var=LIBRARY_PATH
-+ ;;
-+
-+bsdi[45]*)
-+ version_type=linux
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-+ # the default ld.so.conf also contains /usr/contrib/lib and
-+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-+ # libtool to hard-code these into programs
-+ ;;
-+
-+cygwin* | mingw* | pw32*)
-+ version_type=windows
-+ shrext_cmds=".dll"
-+ need_version=no
-+ need_lib_prefix=no
-+
-+ case $GCC,$host_os in
-+ yes,cygwin* | yes,mingw* | yes,pw32*)
-+ library_names_spec='$libname.dll.a'
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname~
-+ chmod a+x \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $rm \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+
-+ case $host_os in
-+ cygwin*)
-+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-+ ;;
-+ mingw*)
-+ # MinGW DLLs use traditional 'lib' prefix
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-+ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-+ # It is most probably a Windows format PATH printed by
-+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
-+ # path with ; separators, and with drive letters. We can handle the
-+ # drive letters (cygwin fileutils understands them), so leave them,
-+ # especially as we might pass files found there to a mingw objdump,
-+ # which wouldn't understand a cygwinified path. Ahh.
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ ;;
-+ pw32*)
-+ # pw32 DLLs use 'pw' prefix rather than 'lib'
-+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ ;;
-+ esac
-+ ;;
-+
-+ *)
-+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ ;;
-+ esac
-+ dynamic_linker='Win32 ld.exe'
-+ # FIXME: first we should search . and the directory the executable is in
-+ shlibpath_var=PATH
-+ ;;
-+
-+darwin* | rhapsody*)
-+ dynamic_linker="$host_os dyld"
-+ version_type=darwin
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-+ soname_spec='${libname}${release}${major}$shared_ext'
-+ shlibpath_overrides_runpath=yes
-+ shlibpath_var=DYLD_LIBRARY_PATH
-+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-+ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-+ if test "$GCC" = yes; then
-+ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-+ else
-+ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
-+ fi
-+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-+ ;;
-+
-+dgux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+freebsd1*)
-+ dynamic_linker=no
-+ ;;
-+
-+kfreebsd*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='GNU ld.so'
-+ ;;
-+
-+freebsd* | dragonfly*)
-+ # DragonFly does not have aout. When/if they implement a new
-+ # versioning mechanism, adjust this.
-+ if test -x /usr/bin/objformat; then
-+ objformat=`/usr/bin/objformat`
-+ else
-+ case $host_os in
-+ freebsd[123]*) objformat=aout ;;
-+ *) objformat=elf ;;
-+ esac
-+ fi
-+ version_type=freebsd-$objformat
-+ case $version_type in
-+ freebsd-elf*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ need_version=no
-+ need_lib_prefix=no
-+ ;;
-+ freebsd-*)
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-+ need_version=yes
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_os in
-+ freebsd2*)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ freebsd3.[01]* | freebsdelf3.[01]*)
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+ freebsd*) # from 4.6 on
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+ esac
-+ ;;
-+
-+gnu*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ ;;
-+
-+hpux9* | hpux10* | hpux11*)
-+ # Give a soname corresponding to the major version so that dld.sl refuses to
-+ # link against other versions.
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ case $host_cpu in
-+ ia64*)
-+ shrext_cmds='.so'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.so"
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ if test "X$HPUX_IA64_MODE" = X32; then
-+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-+ else
-+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-+ fi
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ hppa*64*)
-+ shrext_cmds='.sl'
-+ hardcode_into_libs=yes
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-+ ;;
-+ *)
-+ shrext_cmds='.sl'
-+ dynamic_linker="$host_os dld.sl"
-+ shlibpath_var=SHLIB_PATH
-+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ ;;
-+ esac
-+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
-+ postinstall_cmds='chmod 555 $lib'
-+ ;;
-+
-+interix3*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ ;;
-+
-+irix5* | irix6* | nonstopux*)
-+ case $host_os in
-+ nonstopux*) version_type=nonstopux ;;
-+ *)
-+ if test "$lt_cv_prog_gnu_ld" = yes; then
-+ version_type=linux
-+ else
-+ version_type=irix
-+ fi ;;
-+ esac
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ case $host_os in
-+ irix5* | nonstopux*)
-+ libsuff= shlibsuff=
-+ ;;
-+ *)
-+ case $LD in # libtool.m4 will add one of these switches to LD
-+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-+ libsuff= shlibsuff= libmagic=32-bit;;
-+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-+ libsuff=32 shlibsuff=N32 libmagic=N32;;
-+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
-+ *) libsuff= shlibsuff= libmagic=never-match;;
-+ esac
-+ ;;
-+ esac
-+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-+ hardcode_into_libs=yes
-+ ;;
-+
-+# No shared lib support for Linux oldld, aout, or coff.
-+linux*oldld* | linux*aout* | linux*coff*)
-+ dynamic_linker=no
-+ ;;
-+
-+# This must be Linux ELF.
-+linux*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ # This implies no fast_install, which is unacceptable.
-+ # Some rework will be needed to allow for fast_install
-+ # before this can be enabled.
-+ hardcode_into_libs=yes
-+
-+ # Append ld.so.conf contents to the search path
-+ if test -f /etc/ld.so.conf; then
-+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-+ fi
-+
-+ # We used to test for /lib/ld.so.1 and disable shared libraries on
-+ # powerpc, because MkLinux only supported shared libraries with the
-+ # GNU dynamic linker. Since this was broken with cross compilers,
-+ # most powerpc-linux boxes support dynamic linking these days and
-+ # people can always --disable-shared, the test was removed, and we
-+ # assume the GNU/Linux dynamic linker is in use.
-+ dynamic_linker='GNU/Linux ld.so'
-+ ;;
-+
-+netbsdelf*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='NetBSD ld.elf_so'
-+ ;;
-+
-+knetbsd*-gnu)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ hardcode_into_libs=yes
-+ dynamic_linker='GNU ld.so'
-+ ;;
-+
-+netbsd*)
-+ version_type=sunos
-+ need_lib_prefix=no
-+ need_version=no
-+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ dynamic_linker='NetBSD (a.out) ld.so'
-+ else
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ dynamic_linker='NetBSD ld.elf_so'
-+ fi
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ ;;
-+
-+newsos6)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+nto-qnx*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+
-+openbsd*)
-+ version_type=sunos
-+ sys_lib_dlsearch_path_spec="/usr/lib"
-+ need_lib_prefix=no
-+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-+ case $host_os in
-+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-+ *) need_version=no ;;
-+ esac
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-+ case $host_os in
-+ openbsd2.[89] | openbsd2.[89].*)
-+ shlibpath_overrides_runpath=no
-+ ;;
-+ *)
-+ shlibpath_overrides_runpath=yes
-+ ;;
-+ esac
-+ else
-+ shlibpath_overrides_runpath=yes
-+ fi
-+ ;;
-+
-+os2*)
-+ libname_spec='$name'
-+ shrext_cmds=".dll"
-+ need_lib_prefix=no
-+ library_names_spec='$libname${shared_ext} $libname.a'
-+ dynamic_linker='OS/2 ld.exe'
-+ shlibpath_var=LIBPATH
-+ ;;
-+
-+osf3* | osf4* | osf5*)
-+ version_type=osf
-+ need_lib_prefix=no
-+ need_version=no
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-+ ;;
-+
-+solaris*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ hardcode_into_libs=yes
-+ # ldd complains unless libraries are executable
-+ postinstall_cmds='chmod +x $lib'
-+ ;;
-+
-+sunos4*)
-+ version_type=sunos
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=yes
-+ if test "$with_gnu_ld" = yes; then
-+ need_lib_prefix=no
-+ fi
-+ need_version=yes
-+ ;;
-+
-+sysv4 | sysv4.3*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ case $host_vendor in
-+ sni)
-+ shlibpath_overrides_runpath=no
-+ need_lib_prefix=no
-+ export_dynamic_flag_spec='${wl}-Blargedynsym'
-+ runpath_var=LD_RUN_PATH
-+ ;;
-+ siemens)
-+ need_lib_prefix=no
-+ ;;
-+ motorola)
-+ need_lib_prefix=no
-+ need_version=no
-+ shlibpath_overrides_runpath=no
-+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-+ ;;
-+ esac
-+ ;;
-+
-+sysv4*MP*)
-+ if test -d /usr/nec ;then
-+ version_type=linux
-+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-+ soname_spec='$libname${shared_ext}.$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ fi
-+ ;;
-+
-+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-+ version_type=freebsd-elf
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ hardcode_into_libs=yes
-+ if test "$with_gnu_ld" = yes; then
-+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-+ shlibpath_overrides_runpath=no
-+ else
-+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-+ shlibpath_overrides_runpath=yes
-+ case $host_os in
-+ sco3.2v5*)
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-+ ;;
-+ esac
-+ fi
-+ sys_lib_dlsearch_path_spec='/usr/lib'
-+ ;;
-+
-+uts4*)
-+ version_type=linux
-+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-+ soname_spec='${libname}${release}${shared_ext}$major'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ ;;
-+
-+*)
-+ dynamic_linker=no
-+ ;;
-+esac
-+echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-+echo "${ECHO_T}$dynamic_linker" >&6
-+test "$dynamic_linker" = no && can_build_shared=no
-+
-+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-+if test "$GCC" = yes; then
-+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-+fi
-+
-+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
-+hardcode_action_GCJ=
-+if test -n "$hardcode_libdir_flag_spec_GCJ" || \
-+ test -n "$runpath_var_GCJ" || \
-+ test "X$hardcode_automatic_GCJ" = "Xyes" ; then
-+
-+ # We can hardcode non-existant directories.
-+ if test "$hardcode_direct_GCJ" != no &&
-+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
-+ # have to relink, otherwise we might link with an installed library
-+ # when we should be linking with a yet-to-be-installed one
-+ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
-+ test "$hardcode_minus_L_GCJ" != no; then
-+ # Linking always hardcodes the temporary library directory.
-+ hardcode_action_GCJ=relink
-+ else
-+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
-+ hardcode_action_GCJ=immediate
-+ fi
-+else
-+ # We cannot hardcode anything, or else we can only hardcode existing
-+ # directories.
-+ hardcode_action_GCJ=unsupported
-+fi
-+echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
-+echo "${ECHO_T}$hardcode_action_GCJ" >&6
-+
-+if test "$hardcode_action_GCJ" = relink; then
-+ # Fast installation is not supported
-+ enable_fast_install=no
-+elif test "$shlibpath_overrides_runpath" = yes ||
-+ test "$enable_shared" = no; then
-+ # Fast installation is not necessary
-+ enable_fast_install=needless
-+fi
-+
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+ # See if we are running on zsh, and set the options which allow our commands through
-+ # without removal of \ escapes.
-+ if test -n "${ZSH_VERSION+set}" ; then
-+ setopt NO_GLOB_SUBST
-+ fi
-+ # Now quote all the things that may contain metacharacters while being
-+ # careful not to overquote the AC_SUBSTed values. We take copies of the
-+ # variables and quote the copies for generation of the libtool script.
-+ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+ SED SHELL STRIP \
-+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+ deplibs_check_method reload_flag reload_cmds need_locks \
-+ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+ lt_cv_sys_global_symbol_to_c_name_address \
-+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+ old_postinstall_cmds old_postuninstall_cmds \
-+ compiler_GCJ \
-+ CC_GCJ \
-+ LD_GCJ \
-+ lt_prog_compiler_wl_GCJ \
-+ lt_prog_compiler_pic_GCJ \
-+ lt_prog_compiler_static_GCJ \
-+ lt_prog_compiler_no_builtin_flag_GCJ \
-+ export_dynamic_flag_spec_GCJ \
-+ thread_safe_flag_spec_GCJ \
-+ whole_archive_flag_spec_GCJ \
-+ enable_shared_with_static_runtimes_GCJ \
-+ old_archive_cmds_GCJ \
-+ old_archive_from_new_cmds_GCJ \
-+ predep_objects_GCJ \
-+ postdep_objects_GCJ \
-+ predeps_GCJ \
-+ postdeps_GCJ \
-+ compiler_lib_search_path_GCJ \
-+ archive_cmds_GCJ \
-+ archive_expsym_cmds_GCJ \
-+ postinstall_cmds_GCJ \
-+ postuninstall_cmds_GCJ \
-+ old_archive_from_expsyms_cmds_GCJ \
-+ allow_undefined_flag_GCJ \
-+ no_undefined_flag_GCJ \
-+ export_symbols_cmds_GCJ \
-+ hardcode_libdir_flag_spec_GCJ \
-+ hardcode_libdir_flag_spec_ld_GCJ \
-+ hardcode_libdir_separator_GCJ \
-+ hardcode_automatic_GCJ \
-+ module_cmds_GCJ \
-+ module_expsym_cmds_GCJ \
-+ lt_cv_prog_compiler_c_o_GCJ \
-+ exclude_expsyms_GCJ \
-+ include_expsyms_GCJ; do
-+
-+ case $var in
-+ old_archive_cmds_GCJ | \
-+ old_archive_from_new_cmds_GCJ | \
-+ archive_cmds_GCJ | \
-+ archive_expsym_cmds_GCJ | \
-+ module_cmds_GCJ | \
-+ module_expsym_cmds_GCJ | \
-+ old_archive_from_expsyms_cmds_GCJ | \
-+ export_symbols_cmds_GCJ | \
-+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+ postinstall_cmds | postuninstall_cmds | \
-+ old_postinstall_cmds | old_postuninstall_cmds | \
-+ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+ # Double-quote double-evaled strings.
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+ ;;
-+ *)
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+ ;;
-+ esac
-+ done
-+
-+ case $lt_echo in
-+ *'\$0 --fallback-echo"')
-+ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+ ;;
-+ esac
-+
-+cfgfile="$ofile"
-+
-+ cat <<__EOF__ >> "$cfgfile"
-+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc_GCJ
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler_GCJ
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC_GCJ
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD_GCJ
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_GCJ
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic_GCJ
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static_GCJ
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names. First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds_GCJ
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds_GCJ
-+archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds_GCJ
-+module_expsym_cmds=$lt_module_expsym_cmds_GCJ
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects_GCJ
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects_GCJ
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps_GCJ
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps_GCJ
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag_GCJ
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag_GCJ
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-+
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-+
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action_GCJ
-+
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-+
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
-+
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ
-+
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
-+
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct_GCJ
-+
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L_GCJ
-+
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
-+
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic_GCJ
-+
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs_GCJ
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path="$fix_srcfile_path_GCJ"
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols_GCJ
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds_GCJ
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms_GCJ
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms_GCJ
-+
-+# ### END LIBTOOL TAG CONFIG: $tagname
-+
-+__EOF__
-+
-+
-+else
-+ # If there is no Makefile yet, we rely on a make rule to execute
-+ # `config.status --recheck' to rerun these tests and create the
-+ # libtool script then.
-+ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+ if test -f "$ltmain_in"; then
-+ test -f Makefile && make "$ltmain"
-+ fi
-+fi
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC="$lt_save_CC"
-+
-+ else
-+ tagname=""
-+ fi
-+ ;;
-+
-+ RC)
-+
-+
-+
-+# Source file extension for RC test sources.
-+ac_ext=rc
-+
-+# Object file extension for compiled RC test sources.
-+objext=o
-+objext_RC=$objext
-+
-+# Code to be used in simple compile tests
-+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
-+
-+# Code to be used in simple link tests
-+lt_simple_link_test_code="$lt_simple_compile_test_code"
-+
-+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-+
-+# If no C compiler was specified, use CC.
-+LTCC=${LTCC-"$CC"}
-+
-+# If no C compiler flags were specified, use CFLAGS.
-+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-+
-+# Allow CC to be a program name with arguments.
-+compiler=$CC
-+
-+
-+# save warnings/boilerplate of simple test code
-+ac_outfile=conftest.$ac_objext
-+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_compiler_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+ac_outfile=conftest.$ac_objext
-+printf "$lt_simple_link_test_code" >conftest.$ac_ext
-+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-+_lt_linker_boilerplate=`cat conftest.err`
-+$rm conftest*
-+
-+
-+# Allow CC to be a program name with arguments.
-+lt_save_CC="$CC"
-+CC=${RC-"windres"}
-+compiler=$CC
-+compiler_RC=$CC
-+for cc_temp in $compiler""; do
-+ case $cc_temp in
-+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-+ \-*) ;;
-+ *) break;;
-+ esac
-+done
-+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-+
-+lt_cv_prog_compiler_c_o_RC=yes
-+
-+# The else clause should only fire when bootstrapping the
-+# libtool distribution, otherwise you forgot to ship ltmain.sh
-+# with your package, and you will get complaints that there are
-+# no rules to generate ltmain.sh.
-+if test -f "$ltmain"; then
-+ # See if we are running on zsh, and set the options which allow our commands through
-+ # without removal of \ escapes.
-+ if test -n "${ZSH_VERSION+set}" ; then
-+ setopt NO_GLOB_SUBST
-+ fi
-+ # Now quote all the things that may contain metacharacters while being
-+ # careful not to overquote the AC_SUBSTed values. We take copies of the
-+ # variables and quote the copies for generation of the libtool script.
-+ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-+ SED SHELL STRIP \
-+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-+ deplibs_check_method reload_flag reload_cmds need_locks \
-+ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-+ lt_cv_sys_global_symbol_to_c_name_address \
-+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-+ old_postinstall_cmds old_postuninstall_cmds \
-+ compiler_RC \
-+ CC_RC \
-+ LD_RC \
-+ lt_prog_compiler_wl_RC \
-+ lt_prog_compiler_pic_RC \
-+ lt_prog_compiler_static_RC \
-+ lt_prog_compiler_no_builtin_flag_RC \
-+ export_dynamic_flag_spec_RC \
-+ thread_safe_flag_spec_RC \
-+ whole_archive_flag_spec_RC \
-+ enable_shared_with_static_runtimes_RC \
-+ old_archive_cmds_RC \
-+ old_archive_from_new_cmds_RC \
-+ predep_objects_RC \
-+ postdep_objects_RC \
-+ predeps_RC \
-+ postdeps_RC \
-+ compiler_lib_search_path_RC \
-+ archive_cmds_RC \
-+ archive_expsym_cmds_RC \
-+ postinstall_cmds_RC \
-+ postuninstall_cmds_RC \
-+ old_archive_from_expsyms_cmds_RC \
-+ allow_undefined_flag_RC \
-+ no_undefined_flag_RC \
-+ export_symbols_cmds_RC \
-+ hardcode_libdir_flag_spec_RC \
-+ hardcode_libdir_flag_spec_ld_RC \
-+ hardcode_libdir_separator_RC \
-+ hardcode_automatic_RC \
-+ module_cmds_RC \
-+ module_expsym_cmds_RC \
-+ lt_cv_prog_compiler_c_o_RC \
-+ exclude_expsyms_RC \
-+ include_expsyms_RC; do
-+
-+ case $var in
-+ old_archive_cmds_RC | \
-+ old_archive_from_new_cmds_RC | \
-+ archive_cmds_RC | \
-+ archive_expsym_cmds_RC | \
-+ module_cmds_RC | \
-+ module_expsym_cmds_RC | \
-+ old_archive_from_expsyms_cmds_RC | \
-+ export_symbols_cmds_RC | \
-+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
-+ postinstall_cmds | postuninstall_cmds | \
-+ old_postinstall_cmds | old_postuninstall_cmds | \
-+ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-+ # Double-quote double-evaled strings.
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-+ ;;
-+ *)
-+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-+ ;;
-+ esac
-+ done
-+
-+ case $lt_echo in
-+ *'\$0 --fallback-echo"')
-+ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-+ ;;
-+ esac
-+
-+cfgfile="$ofile"
-+
-+ cat <<__EOF__ >> "$cfgfile"
-+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-+
-+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+
-+# Shell to use when invoking shell scripts.
-+SHELL=$lt_SHELL
-+
-+# Whether or not to build shared libraries.
-+build_libtool_libs=$enable_shared
-+
-+# Whether or not to build static libraries.
-+build_old_libs=$enable_static
-+
-+# Whether or not to add -lc for building shared libraries.
-+build_libtool_need_lc=$archive_cmds_need_lc_RC
-+
-+# Whether or not to disallow shared libs when runtime libs are static
-+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
-+
-+# Whether or not to optimize for fast installation.
-+fast_install=$enable_fast_install
-+
-+# The host system.
-+host_alias=$host_alias
-+host=$host
-+host_os=$host_os
-+
-+# The build system.
-+build_alias=$build_alias
-+build=$build
-+build_os=$build_os
-+
-+# An echo program that does not interpret backslashes.
-+echo=$lt_echo
-+
-+# The archiver.
-+AR=$lt_AR
-+AR_FLAGS=$lt_AR_FLAGS
-+
-+# A C compiler.
-+LTCC=$lt_LTCC
-+
-+# LTCC compiler flags.
-+LTCFLAGS=$lt_LTCFLAGS
-+
-+# A language-specific compiler.
-+CC=$lt_compiler_RC
-+
-+# Is the compiler the GNU C compiler?
-+with_gcc=$GCC_RC
-+
-+# An ERE matcher.
-+EGREP=$lt_EGREP
-+
-+# The linker used to build libraries.
-+LD=$lt_LD_RC
-+
-+# Whether we need hard or soft links.
-+LN_S=$lt_LN_S
-+
-+# A BSD-compatible nm program.
-+NM=$lt_NM
-+
-+# A symbol stripping program
-+STRIP=$lt_STRIP
-+
-+# Used to examine libraries when file_magic_cmd begins "file"
-+MAGIC_CMD=$MAGIC_CMD
-+
-+# Used on cygwin: DLL creation program.
-+DLLTOOL="$DLLTOOL"
-+
-+# Used on cygwin: object dumper.
-+OBJDUMP="$OBJDUMP"
-+
-+# Used on cygwin: assembler.
-+AS="$AS"
-+
-+# The name of the directory that contains temporary libtool files.
-+objdir=$objdir
-+
-+# How to create reloadable object files.
-+reload_flag=$lt_reload_flag
-+reload_cmds=$lt_reload_cmds
-+
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_RC
-+
-+# Object file suffix (normally "o").
-+objext="$ac_objext"
-+
-+# Old archive suffix (normally "a").
-+libext="$libext"
-+
-+# Shared library suffix (normally ".so").
-+shrext_cmds='$shrext_cmds'
-+
-+# Executable file suffix (normally "").
-+exeext="$exeext"
-+
-+# Additional compiler flags for building library objects.
-+pic_flag=$lt_lt_prog_compiler_pic_RC
-+pic_mode=$pic_mode
-+
-+# What is the maximum length of a command?
-+max_cmd_len=$lt_cv_sys_max_cmd_len
-+
-+# Does compiler simultaneously support -c and -o options?
-+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
-+
-+# Must we lock files when doing compilation?
-+need_locks=$lt_need_locks
-+
-+# Do we need the lib prefix for modules?
-+need_lib_prefix=$need_lib_prefix
-+
-+# Do we need a version for libraries?
-+need_version=$need_version
-+
-+# Whether dlopen is supported.
-+dlopen_support=$enable_dlopen
-+
-+# Whether dlopen of programs is supported.
-+dlopen_self=$enable_dlopen_self
-+
-+# Whether dlopen of statically linked programs is supported.
-+dlopen_self_static=$enable_dlopen_self_static
-+
-+# Compiler flag to prevent dynamic linking.
-+link_static_flag=$lt_lt_prog_compiler_static_RC
-+
-+# Compiler flag to turn off builtin functions.
-+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
-+
-+# Compiler flag to allow reflexive dlopens.
-+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
-+
-+# Compiler flag to generate shared objects directly from archives.
-+whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
-+
-+# Compiler flag to generate thread-safe objects.
-+thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
-+
-+# Library versioning type.
-+version_type=$version_type
-+
-+# Format of library name prefix.
-+libname_spec=$lt_libname_spec
-+
-+# List of archive names. First name is the real one, the rest are links.
-+# The last name is the one that the linker finds with -lNAME.
-+library_names_spec=$lt_library_names_spec
-+
-+# The coded name of the library, if different from the real name.
-+soname_spec=$lt_soname_spec
-+
-+# Commands used to build and install an old-style archive.
-+RANLIB=$lt_RANLIB
-+old_archive_cmds=$lt_old_archive_cmds_RC
-+old_postinstall_cmds=$lt_old_postinstall_cmds
-+old_postuninstall_cmds=$lt_old_postuninstall_cmds
-+
-+# Create an old-style archive from a shared archive.
-+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
-+
-+# Create a temporary old-style archive to link instead of a shared archive.
-+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
-+
-+# Commands used to build and install a shared archive.
-+archive_cmds=$lt_archive_cmds_RC
-+archive_expsym_cmds=$lt_archive_expsym_cmds_RC
-+postinstall_cmds=$lt_postinstall_cmds
-+postuninstall_cmds=$lt_postuninstall_cmds
-+
-+# Commands used to build a loadable module (assumed same as above if empty)
-+module_cmds=$lt_module_cmds_RC
-+module_expsym_cmds=$lt_module_expsym_cmds_RC
-+
-+# Commands to strip libraries.
-+old_striplib=$lt_old_striplib
-+striplib=$lt_striplib
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predep_objects=$lt_predep_objects_RC
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdep_objects=$lt_postdep_objects_RC
-+
-+# Dependencies to place before the objects being linked to create a
-+# shared library.
-+predeps=$lt_predeps_RC
-+
-+# Dependencies to place after the objects being linked to create a
-+# shared library.
-+postdeps=$lt_postdeps_RC
-+
-+# The library search path used internally by the compiler when linking
-+# a shared library.
-+compiler_lib_search_path=$lt_compiler_lib_search_path_RC
-+
-+# Method to check whether dependent libraries are shared objects.
-+deplibs_check_method=$lt_deplibs_check_method
-+
-+# Command to use when deplibs_check_method == file_magic.
-+file_magic_cmd=$lt_file_magic_cmd
-+
-+# Flag that allows shared libraries with undefined symbols to be built.
-+allow_undefined_flag=$lt_allow_undefined_flag_RC
-+
-+# Flag that forces no undefined symbols.
-+no_undefined_flag=$lt_no_undefined_flag_RC
-+
-+# Commands used to finish a libtool library installation in a directory.
-+finish_cmds=$lt_finish_cmds
-+
-+# Same as above, but a single script fragment to be evaled but not shown.
-+finish_eval=$lt_finish_eval
-+
-+# Take the output of nm and produce a listing of raw symbols and C names.
-+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-+
-+# Transform the output of nm in a proper C declaration
-+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-+
-+# Transform the output of nm in a C name address pair
-+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-+
-+# This is the shared library runtime path variable.
-+runpath_var=$runpath_var
-+
-+# This is the shared library path variable.
-+shlibpath_var=$shlibpath_var
-
--# Check for any special flags to pass to ltconfig.
--libtool_flags="--cache-file=$cache_file"
--test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
--test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
--test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
--test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
--test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-+# Is shlibpath searched before the hard-coded library search path?
-+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-+# How to hardcode a shared library path into an executable.
-+hardcode_action=$hardcode_action_RC
-
--# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
--if test "${enable_libtool_lock+set}" = set; then
-- enableval="$enable_libtool_lock"
-- :
--fi
-+# Whether we should hardcode library paths into libraries.
-+hardcode_into_libs=$hardcode_into_libs
-
--test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
--test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-+# Flag to hardcode \$libdir into a binary during linking.
-+# This must work even if \$libdir does not exist.
-+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
-
--# Some flags need to be propagated to the compiler or linker for good
--# libtool support.
--case "$lt_target" in
--*-*-irix6*)
-- # Find out which ABI we are using.
-- echo '#line 1422 "configure"' > conftest.$ac_ext
-- if { (eval echo configure:1423: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- case "`/usr/bin/file conftest.o`" in
-- *32-bit*)
-- LD="${LD-ld} -32"
-- ;;
-- *N32*)
-- LD="${LD-ld} -n32"
-- ;;
-- *64-bit*)
-- LD="${LD-ld} -64"
-- ;;
-- esac
-- fi
-- rm -rf conftest*
-- ;;
-+# If ld is used when linking, flag to hardcode \$libdir into
-+# a binary during linking. This must work even if \$libdir does
-+# not exist.
-+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
-
--*-*-sco3.2v5*)
-- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-- SAVE_CFLAGS="$CFLAGS"
-- CFLAGS="$CFLAGS -belf"
-- echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
--echo "configure:1444: checking whether the C compiler needs -belf" >&5
--if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 1449 "configure"
--#include "confdefs.h"
-+# Whether we need a single -rpath flag with a separated argument.
-+hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
-
--int main() {
-+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_direct=$hardcode_direct_RC
-
--; return 0; }
--EOF
--if { (eval echo configure:1456: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- lt_cv_cc_needs_belf=yes
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- lt_cv_cc_needs_belf=no
--fi
--rm -f conftest*
--fi
-+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-+# resulting binary.
-+hardcode_minus_L=$hardcode_minus_L_RC
-
--echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
-- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-- CFLAGS="$SAVE_CFLAGS"
-- fi
-- ;;
-+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-+# the resulting binary.
-+hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
-
-+# Set to yes if building a shared library automatically hardcodes DIR into the library
-+# and all subsequent libraries and executables linked against it.
-+hardcode_automatic=$hardcode_automatic_RC
-
--esac
-+# Variables whose values should be saved in libtool wrapper scripts and
-+# restored at relink time.
-+variables_saved_for_relink="$variables_saved_for_relink"
-+
-+# Whether libtool must link a program against all its dependency libraries.
-+link_all_deplibs=$link_all_deplibs_RC
-+
-+# Compile-time system search path for libraries
-+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-+
-+# Run-time system search path for libraries
-+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-+
-+# Fix the shell variable \$srcfile for the compiler.
-+fix_srcfile_path="$fix_srcfile_path_RC"
-+
-+# Set to yes if exported symbols are required.
-+always_export_symbols=$always_export_symbols_RC
-+
-+# The commands to list exported symbols.
-+export_symbols_cmds=$lt_export_symbols_cmds_RC
-+
-+# The commands to extract the exported symbol list from a shared archive.
-+extract_expsyms_cmds=$lt_extract_expsyms_cmds
-+
-+# Symbols that should not be listed in the preloaded symbols.
-+exclude_expsyms=$lt_exclude_expsyms_RC
-+
-+# Symbols that must always be exported.
-+include_expsyms=$lt_include_expsyms_RC
-+
-+# ### END LIBTOOL TAG CONFIG: $tagname
-+
-+__EOF__
-
-
--# Save cache, so that ltconfig can load it
--cat > confcache <<\EOF
--# This file is a shell script that caches the results of configure
--# tests run on this system so they can be shared between configure
--# scripts and configure runs. It is not useful on other systems.
--# If it contains results you don't want to keep, you may remove or edit it.
--#
--# By default, configure uses ./config.cache as the cache file,
--# creating it if it does not exist already. You can give configure
--# the --cache-file=FILE option to use a different cache file; that is
--# what configure does when it calls configure scripts in
--# subdirectories, so they share the cache.
--# Giving --cache-file=/dev/null disables caching, for debugging configure.
--# config.status only pays attention to the cache file if you give it the
--# --recheck option to rerun configure.
--#
--EOF
--# The following way of writing the cache mishandles newlines in values,
--# but we know of no workaround that is simple, portable, and efficient.
--# So, don't put newlines in cache variables' values.
--# Ultrix sh set writes to stderr and can't be redirected directly,
--# and sets the high bit in the cache file unless we assign to the vars.
--(set) 2>&1 |
-- case `(ac_space=' '; set | grep ac_space) 2>&1` in
-- *ac_space=\ *)
-- # `set' does not quote correctly, so add quotes (double-quote substitution
-- # turns \\\\ into \\, and sed turns \\ into \).
-- sed -n \
-- -e "s/'/'\\\\''/g" \
-- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-- ;;
-- *)
-- # `set' quotes correctly as required by POSIX, so do not add quotes.
-- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-- ;;
-- esac >> confcache
--if cmp -s $cache_file confcache; then
-- :
- else
-- if test -w $cache_file; then
-- echo "updating cache $cache_file"
-- cat confcache > $cache_file
-- else
-- echo "not updating unwritable cache $cache_file"
-+ # If there is no Makefile yet, we rely on a make rule to execute
-+ # `config.status --recheck' to rerun these tests and create the
-+ # libtool script then.
-+ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-+ if test -f "$ltmain_in"; then
-+ test -f Makefile && make "$ltmain"
- fi
- fi
--rm -f confcache
-
-
--# Actually configure libtool. ac_aux_dir is where install-sh is found.
--CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
--LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
--LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
--DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
--${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
--$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
--|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+CC="$lt_save_CC"
-+
-+ ;;
-+
-+ *)
-+ { { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
-+echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
-+ { (exit 1); exit 1; }; }
-+ ;;
-+ esac
-
--# Reload cache, that may have been modified by ltconfig
--if test -r "$cache_file"; then
-- echo "loading cache $cache_file"
-- . $cache_file
--else
-- echo "creating cache $cache_file"
-- > $cache_file
-+ # Append the new tag name to the list of available tags.
-+ if test -n "$tagname" ; then
-+ available_tags="$available_tags $tagname"
-+ fi
-+ fi
-+ done
-+ IFS="$lt_save_ifs"
-+
-+ # Now substitute the updated list of available tags.
-+ if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-+ mv "${ofile}T" "$ofile"
-+ chmod +x "$ofile"
-+ else
-+ rm -f "${ofile}T"
-+ { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
-+echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi
- fi
-
-
-+
- # This can be used to rebuild libtool when needed
--LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
-+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
- # Always use our own libtool.
- LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
--# Redirect the config.log output again, so that the ltconfig log is not
--# clobbered by the next message.
--exec 5>>./config.log
-+# Prevent multiple expansion
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-
-
--echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
--echo "configure:1559: checking whether to enable maintainer-specific portions of Makefiles" >&5
-+
-+
-+
-+
-+
-+
-+
-+echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
-+echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6
- # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
- if test "${enable_maintainer_mode+set}" = set; then
- enableval="$enable_maintainer_mode"
- USE_MAINTAINER_MODE=$enableval
- else
- USE_MAINTAINER_MODE=no
--fi
-+fi;
-+ echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
-+echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6
-
-- echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
--
-
- if test $USE_MAINTAINER_MODE = yes; then
- MAINTAINER_MODE_TRUE=
-@@ -1575,113 +18235,81 @@
- MAINTAINER_MODE_FALSE=
- fi
- MAINT=$MAINTAINER_MODE_TRUE
--
-
-
-
--# Make sure we can run config.sub.
--if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
--else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
--fi
--
--echo $ac_n "checking host system type""... $ac_c" 1>&6
--echo "configure:1589: checking host system type" >&5
--
--host_alias=$host
--case "$host_alias" in
--NONE)
-- case $nonopt in
-- NONE)
-- if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-- fi ;;
-- *) host_alias=$nonopt ;;
-- esac ;;
--esac
--
--host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
--host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
--host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
--host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
--echo "$ac_t""$host" 1>&6
-
-
-
- # Check whether --enable-debug or --disable-debug was given.
- if test "${enable_debug+set}" = set; then
- enableval="$enable_debug"
-- :
-+
- else
- enable_debug=$debug_default
--fi
--
-+fi;
- # Check whether --enable-shm or --disable-shm was given.
- if test "${enable_shm+set}" = set; then
- enableval="$enable_shm"
- echo $enable_shm
- else
- enable_shm="yes"
--fi
--
-+fi;
- # Check whether --enable-ansi or --disable-ansi was given.
- if test "${enable_ansi+set}" = set; then
- enableval="$enable_ansi"
-- :
-+
- else
- enable_ansi=no
--fi
-+fi;
-
- # Check whether --with-glib or --without-glib was given.
- if test "${with_glib+set}" = set; then
- withval="$with_glib"
-- :
--fi
-
-+fi;
- # Check whether --enable-xim or --disable-xim was given.
- if test "${enable_xim+set}" = set; then
- enableval="$enable_xim"
-- :
-+
- else
- enable_xim="yes"
--fi
--
-+fi;
- # Check whether --enable-xim_inst or --disable-xim_inst was given.
- if test "${enable_xim_inst+set}" = set; then
- enableval="$enable_xim_inst"
-- :
-+
- else
- enable_xim_inst="maybe"
--fi
--
-+fi;
- # Check whether --enable-rebuilds or --disable-rebuilds was given.
- if test "${enable_rebuilds+set}" = set; then
- enableval="$enable_rebuilds"
-- :
-+
- else
- enable_rebuilds=yes
--fi
-+fi;
-
- # Check whether --with-locale or --without-locale was given.
- if test "${with_locale+set}" = set; then
- withval="$with_locale"
-- :
--fi
-+
-+fi;
-
-
- # Check whether --with-xinput or --without-xinput was given.
- if test "${with_xinput+set}" = set; then
- withval="$with_xinput"
-- :
--fi
-+
-+fi;
-
- # Check whether --with-native_locale or --without-native_locale was given.
- if test "${with_native_locale+set}" = set; then
- withval="$with_native_locale"
-- :
-+
- else
- with_native_locale=no
--fi
--
-+fi;
-
- if test "x$enable_debug" = "xyes"; then
- test "$cflags_set" = set || CFLAGS="$CFLAGS -g"
-@@ -1694,14 +18322,14 @@
- fi
- fi
-
--cat >> confdefs.h <<EOF
-+cat >>confdefs.h <<_ACEOF
- #define GTK_COMPILED_WITH_DEBUGGING "${enable_debug}"
--EOF
-+_ACEOF
-
-
- # Build time sanity check...
--echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
--echo "configure:1705: checking whether build environment is sane" >&5
-+echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
- # Just in case
- sleep 1
- echo timestamp > conftestfile
-@@ -1723,8 +18351,11 @@
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
-- { echo "configure: error: ls -t appears to fail. Make sure there is not a broken
--alias in your environment" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
-+alias in your environment" >&5
-+echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
-+alias in your environment" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
- test "$2" = conftestfile
-@@ -1733,221 +18364,467 @@
- # Ok.
- :
- else
-- { echo "configure: error: newly created file is older than distributed files!
--Check your system clock" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
-+Check your system clock" >&5
-+echo "$as_me: error: newly created file is older than distributed files!
-+Check your system clock" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
- rm -f conftest*
--echo "$ac_t""yes" 1>&6
-+echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
-
- # Checks for programs.
--# Extract the first word of "gcc", so it can be a program name with args.
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}gcc; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$CC"; then
-+ ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+ echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+fi
-+if test -z "$ac_cv_prog_CC"; then
-+ ac_ct_CC=$CC
-+ # Extract the first word of "gcc", so it can be a program name with args.
- set dummy gcc; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:1747: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_CC"; then
-+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_CC="gcc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+ CC=$ac_ct_CC
-+else
-+ CC="$ac_cv_prog_CC"
-+fi
-+
-+if test -z "$CC"; then
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}cc; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_CC="gcc"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_CC="${ac_tool_prefix}cc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- fi
- fi
--CC="$ac_cv_prog_CC"
-+CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$ac_t""$CC" 1>&6
-+ echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+fi
-+if test -z "$ac_cv_prog_CC"; then
-+ ac_ct_CC=$CC
-+ # Extract the first word of "cc", so it can be a program name with args.
-+set dummy cc; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_CC"; then
-+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_CC="cc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+ CC=$ac_ct_CC
- else
-- echo "$ac_t""no" 1>&6
-+ CC="$ac_cv_prog_CC"
- fi
-
-+fi
- if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
- set dummy cc; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:1777: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_prog_rejected=no
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-- ac_prog_rejected=yes
-- continue
-- fi
-- ac_cv_prog_CC="cc"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-+ ac_prog_rejected=yes
-+ continue
-+ fi
-+ ac_cv_prog_CC="cc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
-- if test $# -gt 0; then
-+ if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
-- set dummy "$ac_dir/$ac_word" "$@"
-- shift
-- ac_cv_prog_CC="$@"
-+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
- fi
- fi
- fi
--CC="$ac_cv_prog_CC"
-+CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$ac_t""$CC" 1>&6
-+ echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
-- if test -z "$CC"; then
-- case "`uname -s`" in
-- *win32* | *WIN32*)
-- # Extract the first word of "cl", so it can be a program name with args.
--set dummy cl; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:1828: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+fi
-+if test -z "$CC"; then
-+ if test -n "$ac_tool_prefix"; then
-+ for ac_prog in cl
-+ do
-+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_CC="cl"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- fi
- fi
--CC="$ac_cv_prog_CC"
-+CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$ac_t""$CC" 1>&6
-+ echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6
- else
-- echo "$ac_t""no" 1>&6
--fi
-- ;;
-- esac
-- fi
-- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
--echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
--echo "configure:1860: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
--
--ac_ext=c
--# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
--ac_cpp='$CPP $CPPFLAGS'
--ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
--ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
--cross_compiling=$ac_cv_prog_cc_cross
--
--cat > conftest.$ac_ext << EOF
--
--#line 1871 "configure"
--#include "confdefs.h"
--
--main(){return(0);}
--EOF
--if { (eval echo configure:1876: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- ac_cv_prog_cc_works=yes
-- # If we can't run a trivial program, we are probably using a cross compiler.
-- if (./conftest; exit) 2>/dev/null; then
-- ac_cv_prog_cc_cross=no
-- else
-- ac_cv_prog_cc_cross=yes
-- fi
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- ac_cv_prog_cc_works=no
-+ test -n "$CC" && break
-+ done
- fi
--rm -fr conftest*
--ac_ext=c
--# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
--ac_cpp='$CPP $CPPFLAGS'
--ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
--ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
--cross_compiling=$ac_cv_prog_cc_cross
--
--echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
--if test $ac_cv_prog_cc_works = no; then
-- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
--fi
--echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
--echo "configure:1902: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
--echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
--cross_compiling=$ac_cv_prog_cc_cross
--
--echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
--echo "configure:1907: checking whether we are using GNU C" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+if test -z "$CC"; then
-+ ac_ct_CC=$CC
-+ for ac_prog in cl
-+do
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.c <<EOF
--#ifdef __GNUC__
-- yes;
--#endif
--EOF
--if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1916: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-- ac_cv_prog_gcc=yes
-+ if test -n "$ac_ct_CC"; then
-+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
- else
-- ac_cv_prog_gcc=no
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_CC="$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
- fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
--echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-+ test -n "$ac_ct_CC" && break
-+done
-+
-+ CC=$ac_ct_CC
-+fi
-
--if test $ac_cv_prog_gcc = yes; then
-- GCC=yes
--else
-- GCC=
- fi
-
--ac_test_CFLAGS="${CFLAGS+set}"
--ac_save_CFLAGS="$CFLAGS"
--CFLAGS=
--echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
--echo "configure:1935: checking whether ${CC-cc} accepts -g" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- echo 'void f(){}' > conftest.c
--if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-+
-+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+# Provide some information about the compiler.
-+echo "$as_me:$LINENO:" \
-+ "checking for C compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-+ (eval $ac_compiler --version </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-+ (eval $ac_compiler -v </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-+ (eval $ac_compiler -V </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+
-+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
-+if test "${ac_cv_c_compiler_gnu+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+#ifndef __GNUC__
-+ choke me
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_compiler_gnu=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_compiler_gnu=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_cv_c_compiler_gnu=$ac_compiler_gnu
-+
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-+GCC=`test $ac_compiler_gnu = yes && echo yes`
-+ac_test_CFLAGS=${CFLAGS+set}
-+ac_save_CFLAGS=$CFLAGS
-+CFLAGS="-g"
-+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
-+if test "${ac_cv_prog_cc_g+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_cv_prog_cc_g=yes
- else
-- ac_cv_prog_cc_g=no
--fi
--rm -f conftest*
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-+ac_cv_prog_cc_g=no
- fi
--
--echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
- if test "$ac_test_CFLAGS" = set; then
-- CFLAGS="$ac_save_CFLAGS"
-+ CFLAGS=$ac_save_CFLAGS
- elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
-@@ -1961,35 +18838,343 @@
- CFLAGS=
- fi
- fi
-+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-+if test "${ac_cv_prog_cc_stdc+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_prog_cc_stdc=no
-+ac_save_CC=$CC
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdarg.h>
-+#include <stdio.h>
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-+struct buf { int x; };
-+FILE * (*rcsopen) (struct buf *, struct stat *, int);
-+static char *e (p, i)
-+ char **p;
-+ int i;
-+{
-+ return p[i];
-+}
-+static char *f (char * (*g) (char **, int), char **p, ...)
-+{
-+ char *s;
-+ va_list v;
-+ va_start (v,p);
-+ s = g (p, va_arg (v,int));
-+ va_end (v);
-+ return s;
-+}
-
--echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
--echo "configure:1967: checking for POSIXized ISC" >&5
--if test -d /etc/conf/kconfig.d &&
-- grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
--then
-- echo "$ac_t""yes" 1>&6
-- ISC=yes # If later tests want to check for ISC.
-- cat >> confdefs.h <<\EOF
--#define _POSIX_SOURCE 1
--EOF
-+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
-+ function prototypes and stuff, but not '\xHH' hex character constants.
-+ These don't provoke an error unfortunately, instead are silently treated
-+ as 'x'. The following induces an error, until -std1 is added to get
-+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
-+ array size@least. It's necessary to write '\x00'==0 to get something
-+ that's true only with -std1. */
-+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-+
-+int test (int i, double x);
-+struct s1 {int (*f) (int a);};
-+struct s2 {int (*f) (double a);};
-+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-+int argc;
-+char **argv;
-+int
-+main ()
-+{
-+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+# Don't try gcc -ansi; that turns off useful extensions and
-+# breaks some systems' header files.
-+# AIX -qlanglvl=ansi
-+# Ultrix and OSF/1 -std1
-+# HP-UX 10.20 and later -Ae
-+# HP-UX older versions -Aa -D_HPUX_SOURCE
-+# SVR4 -Xc -D__EXTENSIONS__
-+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-+do
-+ CC="$ac_save_CC $ac_arg"
-+ rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_prog_cc_stdc=$ac_arg
-+break
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.err conftest.$ac_objext
-+done
-+rm -f conftest.$ac_ext conftest.$ac_objext
-+CC=$ac_save_CC
-+
-+fi
-+
-+case "x$ac_cv_prog_cc_stdc" in
-+ x|xno)
-+ echo "$as_me:$LINENO: result: none needed" >&5
-+echo "${ECHO_T}none needed" >&6 ;;
-+ *)
-+ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-+ CC="$CC $ac_cv_prog_cc_stdc" ;;
-+esac
-+
-+# Some people use a C++ compiler to compile C. Since we use `exit',
-+# in C++ we need to declare it. In case someone uses the same compiler
-+# for both compiling C and C++ we need to have the C++ compiler decide
-+# the declaration of exit, since it's the most demanding environment.
-+cat >conftest.$ac_ext <<_ACEOF
-+#ifndef __cplusplus
-+ choke me
-+#endif
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ for ac_declaration in \
-+ '' \
-+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
-+ 'extern "C" void std::exit (int); using std::exit;' \
-+ 'extern "C" void exit (int) throw ();' \
-+ 'extern "C" void exit (int);' \
-+ 'void exit (int);'
-+do
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_declaration
-+#include <stdlib.h>
-+int
-+main ()
-+{
-+exit (42);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+continue
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_declaration
-+int
-+main ()
-+{
-+exit (42);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ break
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+done
-+rm -f conftest*
-+if test -n "$ac_declaration"; then
-+ echo '#ifdef __cplusplus' >>confdefs.h
-+ echo $ac_declaration >>confdefs.h
-+ echo '#endif' >>confdefs.h
-+fi
-
-- if test "$GCC" = yes; then
-- CC="$CC -posix"
-- else
-- CC="$CC -Xp"
-- fi
- else
-- echo "$ac_t""no" 1>&6
-- ISC=
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+
-+ echo "$as_me:$LINENO: checking for strerror in -lcposix" >&5
-+echo $ECHO_N "checking for strerror in -lcposix... $ECHO_C" >&6
-+if test "${ac_cv_lib_cposix_strerror+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-lcposix $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char strerror ();
-+int
-+main ()
-+{
-+strerror ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_cposix_strerror=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_cposix_strerror=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_cposix_strerror" >&5
-+echo "${ECHO_T}$ac_cv_lib_cposix_strerror" >&6
-+if test $ac_cv_lib_cposix_strerror = yes; then
-+ LIBS="$LIBS -lcposix"
- fi
-
-
-
-
--echo $ac_n "checking for ${CC-cc} option to accept ANSI C""... $ac_c" 1>&6
--echo "configure:1991: checking for ${CC-cc} option to accept ANSI C" >&5
--if eval "test \"`echo '$''{'am_cv_prog_cc_stdc'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+
-+
-+echo "$as_me:$LINENO: checking for ${CC-cc} option to accept ANSI C" >&5
-+echo $ECHO_N "checking for ${CC-cc} option to accept ANSI C... $ECHO_C" >&6
-+if test "${am_cv_prog_cc_stdc+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- am_cv_prog_cc_stdc=no
- ac_save_CC="$CC"
-@@ -2002,9 +19187,12 @@
- for ac_arg in "" -qlanglvl=ansi -std1 "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
- do
- CC="$ac_save_CC $ac_arg"
-- cat > conftest.$ac_ext <<EOF
--#line 2007 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <stdarg.h>
- #include <stdio.h>
- #include <sys/types.h>
-@@ -2034,29 +19222,55 @@
- int argc;
- char **argv;
-
--int main() {
-+int
-+main ()
-+{
-
- return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
-
--; return 0; }
--EOF
--if { (eval echo configure:2044: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- am_cv_prog_cc_stdc="$ac_arg"; break
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- done
- CC="$ac_save_CC"
-
- fi
-
- if test -z "$am_cv_prog_cc_stdc"; then
-- echo "$ac_t""none needed" 1>&6
-+ echo "$as_me:$LINENO: result: none needed" >&5
-+echo "${ECHO_T}none needed" >&6
- else
-- echo "$ac_t""$am_cv_prog_cc_stdc" 1>&6
-+ echo "$as_me:$LINENO: result: $am_cv_prog_cc_stdc" >&5
-+echo "${ECHO_T}$am_cv_prog_cc_stdc" >&6
- fi
- case "x$am_cv_prog_cc_stdc" in
- x|xno) ;;
-@@ -2070,87 +19284,104 @@
- # SunOS /usr/etc/install
- # IRIX /sbin/install
- # AIX /bin/install
-+# AmigaOS /C/install, which installs bootblocks on floppy discs
- # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
- # AFS /usr/afsws/bin/install, which mishandles nonexistent args
- # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-+# OS/2's system install, which has a completely different semantic
- # ./install, which can be erroneously created by make from ./install.sh.
--echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
--echo "configure:2079: checking for a BSD compatible install" >&5
-+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
- if test -z "$INSTALL"; then
--if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+if test "${ac_cv_path_install+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
-- for ac_dir in $PATH; do
-- # Account for people who put trailing slashes in PATH elements.
-- case "$ac_dir/" in
-- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-- *)
-- # OSF1 and SCO ODT 3.0 have their own names for install.
-- # Don't use installbsd from OSF since it installs stuff as root
-- # by default.
-- for ac_prog in ginstall scoinst install; do
-- if test -f $ac_dir/$ac_prog; then
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ # Account for people who put trailing slashes in PATH elements.
-+case $as_dir/ in
-+ ./ | .// | /cC/* | \
-+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-+ /usr/ucb/* ) ;;
-+ *)
-+ # OSF1 and SCO ODT 3.0 have their own names for install.
-+ # Don't use installbsd from OSF since it installs stuff as root
-+ # by default.
-+ for ac_prog in ginstall scoinst install; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
- if test $ac_prog = install &&
-- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
-+ elif test $ac_prog = install &&
-+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+ # program-specific install script used by HP pwplus--don't use.
-+ :
- else
-- ac_cv_path_install="$ac_dir/$ac_prog -c"
-- break 2
-+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-+ break 3
- fi
- fi
- done
-- ;;
-- esac
-- done
-- IFS="$ac_save_IFS"
-+ done
-+ ;;
-+esac
-+done
-+
-
- fi
- if test "${ac_cv_path_install+set}" = set; then
-- INSTALL="$ac_cv_path_install"
-+ INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
-- INSTALL="$ac_install_sh"
-+ INSTALL=$ac_install_sh
- fi
- fi
--echo "$ac_t""$INSTALL" 1>&6
-+echo "$as_me:$LINENO: result: $INSTALL" >&5
-+echo "${ECHO_T}$INSTALL" >&6
-
- # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
- # It thinks the first close brace ends the variable substitution.
- test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
--test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
- test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
--echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
--echo "configure:2132: checking whether ${MAKE-make} sets \${MAKE}" >&5
--set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
-+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
-+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftestmake <<\EOF
-+ cat >conftest.make <<\_ACEOF
- all:
-- @echo 'ac_maketemp="${MAKE}"'
--EOF
-+ @echo 'ac_maketemp="$(MAKE)"'
-+_ACEOF
- # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
--eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
- if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
- else
- eval ac_cv_prog_make_${ac_make}_set=no
- fi
--rm -f conftestmake
-+rm -f conftest.make
- fi
- if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
- SET_MAKE=
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- SET_MAKE="MAKE=${MAKE-make}"
- fi
-
-@@ -2182,540 +19413,611 @@
-
- for ac_prog in gawk mawk nawk awk
- do
--# Extract the first word of "$ac_prog", so it can be a program name with args.
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:2189: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_AWK+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_AWK="$ac_prog"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_AWK="$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- fi
- fi
--AWK="$ac_cv_prog_AWK"
-+AWK=$ac_cv_prog_AWK
- if test -n "$AWK"; then
-- echo "$ac_t""$AWK" 1>&6
-+ echo "$as_me:$LINENO: result: $AWK" >&5
-+echo "${ECHO_T}$AWK" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
--test -n "$AWK" && break
-+ test -n "$AWK" && break
- done
-
- for ac_prog in perl5 perl
- do
--# Extract the first word of "$ac_prog", so it can be a program name with args.
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:2223: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_PERL'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_PERL+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$PERL"; then
- ac_cv_prog_PERL="$PERL" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_PERL="$ac_prog"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_PERL="$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- fi
- fi
--PERL="$ac_cv_prog_PERL"
-+PERL=$ac_cv_prog_PERL
- if test -n "$PERL"; then
-- echo "$ac_t""$PERL" 1>&6
-+ echo "$as_me:$LINENO: result: $PERL" >&5
-+echo "${ECHO_T}$PERL" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
--test -n "$PERL" && break
-+ test -n "$PERL" && break
- done
-
-
- # We would like indent, but don't require it.
- # Extract the first word of "indent", so it can be a program name with args.
- set dummy indent; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:2257: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_INDENT'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_INDENT+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$INDENT"; then
- ac_cv_prog_INDENT="$INDENT" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_INDENT="indent"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
--fi
--fi
--INDENT="$ac_cv_prog_INDENT"
--if test -n "$INDENT"; then
-- echo "$ac_t""$INDENT" 1>&6
--else
-- echo "$ac_t""no" 1>&6
--fi
--
--
--REBUILD=\#
--if test "x$enable_rebuilds" = "xyes" && \
-- test -n "$PERL" && \
-- $PERL -e 'exit !($] >= 5.002)' > /dev/null 2>&1 && \
-- test -n "$AWK" ; then
-- REBUILD=
--fi
--
--
--echo $ac_n "checking whether make is GNU Make""... $ac_c" 1>&6
--echo "configure:2294: checking whether make is GNU Make" >&5
--STRIP_BEGIN=
--STRIP_END=
--if $ac_make --version 2>/dev/null | grep '^GNU Make ' >/dev/null ; then
-- STRIP_BEGIN='$(strip $(STRIP_DUMMY)'
-- STRIP_END=')'
-- echo "$ac_t""yes" 1>&6
--else
-- echo "$ac_t""no" 1>&6
--fi
--STRIP_DUMMY=
--
--
--
--
--# i18n stuff
--ALL_LINGUAS="az ca cs da de el es et eu fi fr ga gl hr hu it ja ko lt nl no nn pl pt pt_BR ro ru sk sl sp sr sv tr uk vi wa zh_CN.GB2312 zh_TW.Big5"
--echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
--echo "configure:2312: checking how to run the C preprocessor" >&5
--# On Suns, sometimes $CPP names a directory.
--if test -n "$CPP" && test -d "$CPP"; then
-- CPP=
--fi
--if test -z "$CPP"; then
--if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- # This must be in double quotes, not single quotes, because CPP may get
-- # substituted into the Makefile and "${CC-cc}" will confuse make.
-- CPP="${CC-cc} -E"
-- # On the NeXT, cc -E runs the code through the compiler's parser,
-- # not just through cpp.
-- cat > conftest.$ac_ext <<EOF
--#line 2327 "configure"
--#include "confdefs.h"
--#include <assert.h>
--Syntax Error
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:2333: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- :
--else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- CPP="${CC-cc} -E -traditional-cpp"
-- cat > conftest.$ac_ext <<EOF
--#line 2344 "configure"
--#include "confdefs.h"
--#include <assert.h>
--Syntax Error
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:2350: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- :
--else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- CPP="${CC-cc} -nologo -E"
-- cat > conftest.$ac_ext <<EOF
--#line 2361 "configure"
--#include "confdefs.h"
--#include <assert.h>
--Syntax Error
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:2367: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- :
--else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- CPP=/lib/cpp
--fi
--rm -f conftest*
--fi
--rm -f conftest*
--fi
--rm -f conftest*
-- ac_cv_prog_CPP="$CPP"
--fi
-- CPP="$ac_cv_prog_CPP"
--else
-- ac_cv_prog_CPP="$CPP"
--fi
--echo "$ac_t""$CPP" 1>&6
--
--echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
--echo "configure:2392: checking for ANSI C header files" >&5
--if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 2397 "configure"
--#include "confdefs.h"
--#include <stdlib.h>
--#include <stdarg.h>
--#include <string.h>
--#include <float.h>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:2405: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- ac_cv_header_stdc=yes
--else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_cv_header_stdc=no
--fi
--rm -f conftest*
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_INDENT="indent"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-
--if test $ac_cv_header_stdc = yes; then
-- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
--cat > conftest.$ac_ext <<EOF
--#line 2422 "configure"
--#include "confdefs.h"
--#include <string.h>
--EOF
--if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "memchr" >/dev/null 2>&1; then
-- :
-+fi
-+fi
-+INDENT=$ac_cv_prog_INDENT
-+if test -n "$INDENT"; then
-+ echo "$as_me:$LINENO: result: $INDENT" >&5
-+echo "${ECHO_T}$INDENT" >&6
- else
-- rm -rf conftest*
-- ac_cv_header_stdc=no
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
--rm -f conftest*
-
-+
-+REBUILD=\#
-+if test "x$enable_rebuilds" = "xyes" && \
-+ test -n "$PERL" && \
-+ $PERL -e 'exit !($] >= 5.002)' > /dev/null 2>&1 && \
-+ test -n "$AWK" ; then
-+ REBUILD=
- fi
-
--if test $ac_cv_header_stdc = yes; then
-- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
--cat > conftest.$ac_ext <<EOF
--#line 2440 "configure"
--#include "confdefs.h"
--#include <stdlib.h>
--EOF
--if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "free" >/dev/null 2>&1; then
-- :
-+
-+echo "$as_me:$LINENO: checking whether make is GNU Make" >&5
-+echo $ECHO_N "checking whether make is GNU Make... $ECHO_C" >&6
-+STRIP_BEGIN=
-+STRIP_END=
-+if $ac_make --version 2>/dev/null | grep '^GNU Make ' >/dev/null ; then
-+ STRIP_BEGIN='$(strip $(STRIP_DUMMY)'
-+ STRIP_END=')'
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
- else
-- rm -rf conftest*
-- ac_cv_header_stdc=no
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
--rm -f conftest*
-+STRIP_DUMMY=
-
--fi
-
--if test $ac_cv_header_stdc = yes; then
-- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
--if test "$cross_compiling" = yes; then
-- :
-+
-+
-+# i18n stuff
-+ALL_LINGUAS="az ca cs da de el es et eu fi fr ga gl hr hu it ja ko lt nl no nn pl pt pt_BR ro ru sk sl sp sr sv tr uk vi wa zh_CN.GB2312 zh_TW.Big5"
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_RANLIB+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2461 "configure"
--#include "confdefs.h"
--#include <ctype.h>
--#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
--#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
--#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
--int main () { int i; for (i = 0; i < 256; i++)
--if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
--exit (0); }
-+ if test -n "$RANLIB"; then
-+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-
--EOF
--if { (eval echo configure:2472: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
--then
-- :
-+fi
-+fi
-+RANLIB=$ac_cv_prog_RANLIB
-+if test -n "$RANLIB"; then
-+ echo "$as_me:$LINENO: result: $RANLIB" >&5
-+echo "${ECHO_T}$RANLIB" >&6
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -fr conftest*
-- ac_cv_header_stdc=no
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
--rm -fr conftest*
-+
- fi
-+if test -z "$ac_cv_prog_RANLIB"; then
-+ ac_ct_RANLIB=$RANLIB
-+ # Extract the first word of "ranlib", so it can be a program name with args.
-+set dummy ranlib; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_RANLIB"; then
-+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_RANLIB="ranlib"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-
-+ test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
- fi
- fi
-+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-+if test -n "$ac_ct_RANLIB"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-+echo "${ECHO_T}$ac_ct_RANLIB" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-
--echo "$ac_t""$ac_cv_header_stdc" 1>&6
--if test $ac_cv_header_stdc = yes; then
-- cat >> confdefs.h <<\EOF
--#define STDC_HEADERS 1
--EOF
--
-+ RANLIB=$ac_ct_RANLIB
-+else
-+ RANLIB="$ac_cv_prog_RANLIB"
- fi
-
--echo $ac_n "checking for working const""... $ac_c" 1>&6
--echo "configure:2496: checking for working const" >&5
--if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
-+echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6
-+if test "${ac_cv_c_const+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2501 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--int main() {
-+int
-+main ()
-+{
-+/* FIXME: Include the comments suggested by Paul. */
-+#ifndef __cplusplus
-+ /* Ultrix mips cc rejects this. */
-+ typedef int charset[2];
-+ const charset x;
-+ /* SunOS 4.1.1 cc rejects this. */
-+ char const *const *ccp;
-+ char **p;
-+ /* NEC SVR4.0.2 mips cc rejects this. */
-+ struct point {int x, y;};
-+ static struct point const zero = {0,0};
-+ /* AIX XL C 1.02.0.0 rejects this.
-+ It does not let you subtract one const X* pointer from another in
-+ an arm of an if-expression whose if-part is not a constant
-+ expression */
-+ const char *g = "string";
-+ ccp = &g + (g ? g-g : 0);
-+ /* HPUX 7.0 cc rejects these. */
-+ ++ccp;
-+ p = (char**) ccp;
-+ ccp = (char const *const *) p;
-+ { /* SCO 3.2v4 cc rejects this. */
-+ char *t;
-+ char const *s = 0 ? (char *) 0 : (char const *) 0;
-
--/* Ultrix mips cc rejects this. */
--typedef int charset[2]; const charset x;
--/* SunOS 4.1.1 cc rejects this. */
--char const *const *ccp;
--char **p;
--/* NEC SVR4.0.2 mips cc rejects this. */
--struct point {int x, y;};
--static struct point const zero = {0,0};
--/* AIX XL C 1.02.0.0 rejects this.
-- It does not let you subtract one const X* pointer from another in an arm
-- of an if-expression whose if-part is not a constant expression */
--const char *g = "string";
--ccp = &g + (g ? g-g : 0);
--/* HPUX 7.0 cc rejects these. */
--++ccp;
--p = (char**) ccp;
--ccp = (char const *const *) p;
--{ /* SCO 3.2v4 cc rejects this. */
-- char *t;
-- char const *s = 0 ? (char *) 0 : (char const *) 0;
--
-- *t++ = 0;
--}
--{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
-- int x[] = {25, 17};
-- const int *foo = &x[0];
-- ++foo;
--}
--{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
-- typedef const int *iptr;
-- iptr p = 0;
-- ++p;
--}
--{ /* AIX XL C 1.02.0.0 rejects this saying
-- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
-- struct s { int j; const int *ap[3]; };
-- struct s *b; b->j = 5;
--}
--{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
-- const int foo = 10;
--}
-+ *t++ = 0;
-+ }
-+ { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
-+ int x[] = {25, 17};
-+ const int *foo = &x[0];
-+ ++foo;
-+ }
-+ { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
-+ typedef const int *iptr;
-+ iptr p = 0;
-+ ++p;
-+ }
-+ { /* AIX XL C 1.02.0.0 rejects this saying
-+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
-+ struct s { int j; const int *ap[3]; };
-+ struct s *b; b->j = 5;
-+ }
-+ { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
-+ const int foo = 10;
-+ }
-+#endif
-
--; return 0; }
--EOF
--if { (eval echo configure:2550: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_cv_c_const=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_cv_c_const=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_c_const=no
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
--
--echo "$ac_t""$ac_cv_c_const" 1>&6
-+echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
-+echo "${ECHO_T}$ac_cv_c_const" >&6
- if test $ac_cv_c_const = no; then
-- cat >> confdefs.h <<\EOF
--#define const
--EOF
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define const
-+_ACEOF
-
- fi
-
--echo $ac_n "checking for inline""... $ac_c" 1>&6
--echo "configure:2571: checking for inline" >&5
--if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for inline" >&5
-+echo $ECHO_N "checking for inline... $ECHO_C" >&6
-+if test "${ac_cv_c_inline+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- ac_cv_c_inline=no
- for ac_kw in inline __inline__ __inline; do
-- cat > conftest.$ac_ext <<EOF
--#line 2578 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#ifndef __cplusplus
-+typedef int foo_t;
-+static $ac_kw foo_t static_foo () {return 0; }
-+$ac_kw foo_t foo () {return 0; }
-+#endif
-
--int main() {
--} $ac_kw foo() {
--; return 0; }
--EOF
--if { (eval echo configure:2585: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_cv_c_inline=$ac_kw; break
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- done
-
- fi
-+echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5
-+echo "${ECHO_T}$ac_cv_c_inline" >&6
-+
-
--echo "$ac_t""$ac_cv_c_inline" 1>&6
--case "$ac_cv_c_inline" in
-+case $ac_cv_c_inline in
- inline | yes) ;;
-- no) cat >> confdefs.h <<\EOF
--#define inline
--EOF
-- ;;
-- *) cat >> confdefs.h <<EOF
--#define inline $ac_cv_c_inline
--EOF
-- ;;
-+ *)
-+ case $ac_cv_c_inline in
-+ no) ac_val=;;
-+ *) ac_val=$ac_cv_c_inline;;
-+ esac
-+ cat >>confdefs.h <<_ACEOF
-+#ifndef __cplusplus
-+#define inline $ac_val
-+#endif
-+_ACEOF
-+ ;;
- esac
-
--echo $ac_n "checking for off_t""... $ac_c" 1>&6
--echo "configure:2611: checking for off_t" >&5
--if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 2616 "configure"
--#include "confdefs.h"
--#include <sys/types.h>
--#if STDC_HEADERS
--#include <stdlib.h>
--#include <stddef.h>
--#endif
--EOF
--if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
-- rm -rf conftest*
-+echo "$as_me:$LINENO: checking for off_t" >&5
-+echo $ECHO_N "checking for off_t... $ECHO_C" >&6
-+if test "${ac_cv_type_off_t+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+if ((off_t *) 0)
-+ return 0;
-+if (sizeof (off_t))
-+ return 0;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_cv_type_off_t=yes
- else
-- rm -rf conftest*
-- ac_cv_type_off_t=no
--fi
--rm -f conftest*
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-+ac_cv_type_off_t=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
--echo "$ac_t""$ac_cv_type_off_t" 1>&6
--if test $ac_cv_type_off_t = no; then
-- cat >> confdefs.h <<\EOF
-+echo "$as_me:$LINENO: result: $ac_cv_type_off_t" >&5
-+echo "${ECHO_T}$ac_cv_type_off_t" >&6
-+if test $ac_cv_type_off_t = yes; then
-+ :
-+else
-+
-+cat >>confdefs.h <<_ACEOF
- #define off_t long
--EOF
-+_ACEOF
-
- fi
-
--echo $ac_n "checking for size_t""... $ac_c" 1>&6
--echo "configure:2644: checking for size_t" >&5
--if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 2649 "configure"
--#include "confdefs.h"
--#include <sys/types.h>
--#if STDC_HEADERS
--#include <stdlib.h>
--#include <stddef.h>
--#endif
--EOF
--if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
-- rm -rf conftest*
-+echo "$as_me:$LINENO: checking for size_t" >&5
-+echo $ECHO_N "checking for size_t... $ECHO_C" >&6
-+if test "${ac_cv_type_size_t+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+if ((size_t *) 0)
-+ return 0;
-+if (sizeof (size_t))
-+ return 0;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_cv_type_size_t=yes
- else
-- rm -rf conftest*
-- ac_cv_type_size_t=no
--fi
--rm -f conftest*
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-+ac_cv_type_size_t=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
--echo "$ac_t""$ac_cv_type_size_t" 1>&6
--if test $ac_cv_type_size_t = no; then
-- cat >> confdefs.h <<\EOF
-+echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
-+echo "${ECHO_T}$ac_cv_type_size_t" >&6
-+if test $ac_cv_type_size_t = yes; then
-+ :
-+else
-+
-+cat >>confdefs.h <<_ACEOF
- #define size_t unsigned
--EOF
-+_ACEOF
-
- fi
-
- # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
- # for constant arguments. Useless!
--echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
--echo "configure:2679: checking for working alloca.h" >&5
--if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 2684 "configure"
--#include "confdefs.h"
-+echo "$as_me:$LINENO: checking for working alloca.h" >&5
-+echo $ECHO_N "checking for working alloca.h... $ECHO_C" >&6
-+if test "${ac_cv_working_alloca_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <alloca.h>
--int main() {
--char *p = alloca(2 * sizeof(int));
--; return 0; }
--EOF
--if { (eval echo configure:2691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- ac_cv_header_alloca_h=yes
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_cv_header_alloca_h=no
--fi
--rm -f conftest*
--fi
-+int
-+main ()
-+{
-+char *p = (char *) alloca (2 * sizeof (int));
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_working_alloca_h=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_working_alloca_h=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_working_alloca_h" >&5
-+echo "${ECHO_T}$ac_cv_working_alloca_h" >&6
-+if test $ac_cv_working_alloca_h = yes; then
-
--echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
--if test $ac_cv_header_alloca_h = yes; then
-- cat >> confdefs.h <<\EOF
-+cat >>confdefs.h <<\_ACEOF
- #define HAVE_ALLOCA_H 1
--EOF
-+_ACEOF
-
- fi
-
--echo $ac_n "checking for alloca""... $ac_c" 1>&6
--echo "configure:2712: checking for alloca" >&5
--if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for alloca" >&5
-+echo $ECHO_N "checking for alloca... $ECHO_C" >&6
-+if test "${ac_cv_func_alloca_works+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2717 "configure"
--#include "confdefs.h"
--
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #ifdef __GNUC__
- # define alloca __builtin_alloca
- #else
-@@ -2737,137 +20039,215 @@
- # endif
- #endif
-
--int main() {
--char *p = (char *) alloca(1);
--; return 0; }
--EOF
--if { (eval echo configure:2745: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-+int
-+main ()
-+{
-+char *p = (char *) alloca (1);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_cv_func_alloca_works=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_cv_func_alloca_works=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_func_alloca_works=no
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_alloca_works" >&5
-+echo "${ECHO_T}$ac_cv_func_alloca_works" >&6
-
--echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
- if test $ac_cv_func_alloca_works = yes; then
-- cat >> confdefs.h <<\EOF
--#define HAVE_ALLOCA 1
--EOF
-
--fi
-+cat >>confdefs.h <<\_ACEOF
-+#define HAVE_ALLOCA 1
-+_ACEOF
-
--if test $ac_cv_func_alloca_works = no; then
-+else
- # The SVR3 libPW and SVR4 libucb both contain incompatible functions
-- # that cause trouble. Some versions do not even contain alloca or
-- # contain a buggy version. If you still want to use their alloca,
-- # use ar to extract alloca.o from them instead of compiling alloca.c.
-- ALLOCA=alloca.${ac_objext}
-- cat >> confdefs.h <<\EOF
-+# that cause trouble. Some versions do not even contain alloca or
-+# contain a buggy version. If you still want to use their alloca,
-+# use ar to extract alloca.o from them instead of compiling alloca.c.
-+
-+ALLOCA=alloca.$ac_objext
-+
-+cat >>confdefs.h <<\_ACEOF
- #define C_ALLOCA 1
--EOF
-+_ACEOF
-
-
--echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
--echo "configure:2777: checking whether alloca needs Cray hooks" >&5
--if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 2782 "configure"
--#include "confdefs.h"
-+echo "$as_me:$LINENO: checking whether \`alloca.c' needs Cray hooks" >&5
-+echo $ECHO_N "checking whether \`alloca.c' needs Cray hooks... $ECHO_C" >&6
-+if test "${ac_cv_os_cray+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #if defined(CRAY) && ! defined(CRAY2)
- webecray
- #else
- wenotbecray
- #endif
-
--EOF
-+_ACEOF
- if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "webecray" >/dev/null 2>&1; then
-- rm -rf conftest*
-+ $EGREP "webecray" >/dev/null 2>&1; then
- ac_cv_os_cray=yes
- else
-- rm -rf conftest*
- ac_cv_os_cray=no
- fi
- rm -f conftest*
-
- fi
--
--echo "$ac_t""$ac_cv_os_cray" 1>&6
-+echo "$as_me:$LINENO: result: $ac_cv_os_cray" >&5
-+echo "${ECHO_T}$ac_cv_os_cray" >&6
- if test $ac_cv_os_cray = yes; then
--for ac_func in _getb67 GETB67 getb67; do
-- echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
--echo "configure:2807: checking for $ac_func" >&5
--if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 2812 "configure"
--#include "confdefs.h"
-+ for ac_func in _getb67 GETB67 getb67; do
-+ as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define $ac_func innocuous_$ac_func
-+
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char $ac_func(); below. */
--#include <assert.h>
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char $ac_func();
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-
--int main() {
-+#undef $ac_func
-
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
- choke me
- #else
--$ac_func();
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:2835: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_$ac_func=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_$ac_func=no"
--fi
--rm -f conftest*
--fi
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_var=no"
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-
--if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- cat >> confdefs.h <<EOF
-+cat >>confdefs.h <<_ACEOF
- #define CRAY_STACKSEG_END $ac_func
--EOF
-+_ACEOF
-
-- break
--else
-- echo "$ac_t""no" 1>&6
-+ break
- fi
-
--done
-+ done
- fi
-
--echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
--echo "configure:2862: checking stack direction for C alloca" >&5
--if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking stack direction for C alloca" >&5
-+echo $ECHO_N "checking stack direction for C alloca... $ECHO_C" >&6
-+if test "${ac_cv_c_stack_direction+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test "$cross_compiling" = yes; then
- ac_cv_c_stack_direction=0
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2870 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+int
- find_stack_direction ()
- {
- static char *addr = 0;
-@@ -2880,138 +20260,314 @@
- else
- return (&dummy > addr) ? 1 : -1;
- }
-+
-+int
- main ()
- {
-- exit (find_stack_direction() < 0);
-+ exit (find_stack_direction () < 0);
- }
--EOF
--if { (eval echo configure:2889: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
--then
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_cv_c_stack_direction=1
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -fr conftest*
-- ac_cv_c_stack_direction=-1
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+ac_cv_c_stack_direction=-1
- fi
--rm -fr conftest*
-+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
- fi
--
- fi
-+echo "$as_me:$LINENO: result: $ac_cv_c_stack_direction" >&5
-+echo "${ECHO_T}$ac_cv_c_stack_direction" >&6
-
--echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
--cat >> confdefs.h <<EOF
-+cat >>confdefs.h <<_ACEOF
- #define STACK_DIRECTION $ac_cv_c_stack_direction
--EOF
-+_ACEOF
-+
-
- fi
-
--for ac_hdr in unistd.h
-+
-+
-+for ac_header in stdlib.h unistd.h
- do
--ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
--echo "configure:2914: checking for $ac_hdr" >&5
--if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+else
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2919 "configure"
--#include "confdefs.h"
--#include <$ac_hdr>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:2924: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=yes"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+ yes:no: )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-+ ac_header_preproc=yes
-+ ;;
-+ no:yes:* )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------------ ##
-+## Report this to the AC_PACKAGE_NAME lists. ##
-+## ------------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=no"
-+ eval "$as_ac_Header=\$ac_header_preproc"
- fi
--rm -f conftest*
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+
- fi
--if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_hdr 1
--EOF
--
--else
-- echo "$ac_t""no" 1>&6
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
- fi
-+
- done
-
-+
- for ac_func in getpagesize
- do
--echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
--echo "configure:2953: checking for $ac_func" >&5
--if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 2958 "configure"
--#include "confdefs.h"
-+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define $ac_func innocuous_$ac_func
-+
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char $ac_func(); below. */
--#include <assert.h>
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char $ac_func();
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-
--int main() {
-+#undef $ac_func
-
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
- choke me
- #else
--$ac_func();
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:2981: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_$ac_func=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_$ac_func=no"
--fi
--rm -f conftest*
--fi
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_var=no"
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+_ACEOF
-
--if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_func 1
--EOF
--
--else
-- echo "$ac_t""no" 1>&6
- fi
- done
-
--echo $ac_n "checking for working mmap""... $ac_c" 1>&6
--echo "configure:3006: checking for working mmap" >&5
--if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for working mmap" >&5
-+echo $ECHO_N "checking for working mmap... $ECHO_C" >&6
-+if test "${ac_cv_func_mmap_fixed_mapped+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test "$cross_compiling" = yes; then
- ac_cv_func_mmap_fixed_mapped=no
- else
-- cat > conftest.$ac_ext <<EOF
--#line 3014 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+/* malloc might have been renamed as rpl_malloc. */
-+#undef malloc
-
- /* Thanks to Mike Haertel and Jim Avera for this test.
- Here is a matrix of mmap possibilities:
-@@ -3025,34 +20581,34 @@
- back from the file, nor mmap's back from the file@a different
- address. (There have been systems where private was not correctly
- implemented like the infamous i386 svr4.0, and systems where the
-- VM page cache was not coherent with the filesystem buffer cache
-+ VM page cache was not coherent with the file system buffer cache
- like early versions of FreeBSD and possibly contemporary NetBSD.)
- For shared mappings, we should conversely verify that changes get
-- propogated back to all the places they're supposed to be.
-+ propagated back to all the places they're supposed to be.
-
- Grep wants private fixed already mapped.
- The main things grep needs to know about mmap are:
- * does it exist and is it safe to write into the mmap'd area
- * how to use it (BSD variants) */
--#include <sys/types.h>
-+
- #include <fcntl.h>
- #include <sys/mman.h>
-
--/* This mess was copied from the GNU getpagesize.h. */
--#ifndef HAVE_GETPAGESIZE
--# ifdef HAVE_UNISTD_H
--# include <unistd.h>
--# endif
-+#if !STDC_HEADERS && !HAVE_STDLIB_H
-+char *malloc ();
-+#endif
-
-+/* This mess was copied from the GNU getpagesize.h. */
-+#if !HAVE_GETPAGESIZE
- /* Assume that all systems that can run configure have sys/param.h. */
--# ifndef HAVE_SYS_PARAM_H
-+# if !HAVE_SYS_PARAM_H
- # define HAVE_SYS_PARAM_H 1
- # endif
-
- # ifdef _SC_PAGESIZE
- # define getpagesize() sysconf(_SC_PAGESIZE)
- # else /* no _SC_PAGESIZE */
--# ifdef HAVE_SYS_PARAM_H
-+# if HAVE_SYS_PARAM_H
- # include <sys/param.h>
- # ifdef EXEC_PAGESIZE
- # define getpagesize() EXEC_PAGESIZE
-@@ -3079,308 +20635,491 @@
-
- #endif /* no HAVE_GETPAGESIZE */
-
--#ifdef __cplusplus
--extern "C" { void *malloc(unsigned); }
--#else
--char *malloc();
--#endif
--
- int
--main()
-+main ()
- {
-- char *data, *data2, *data3;
-- int i, pagesize;
-- int fd;
--
-- pagesize = getpagesize();
--
-- /*
-- * First, make a file with some known garbage in it.
-- */
-- data = malloc(pagesize);
-- if (!data)
-- exit(1);
-- for (i = 0; i < pagesize; ++i)
-- *(data + i) = rand();
-- umask(0);
-- fd = creat("conftestmmap", 0600);
-- if (fd < 0)
-- exit(1);
-- if (write(fd, data, pagesize) != pagesize)
-- exit(1);
-- close(fd);
--
-- /*
-- * Next, try to mmap the file at a fixed address which
-- * already has something else allocated at it. If we can,
-- * also make sure that we see the same garbage.
-- */
-- fd = open("conftestmmap", O_RDWR);
-- if (fd < 0)
-- exit(1);
-- data2 = malloc(2 * pagesize);
-- if (!data2)
-- exit(1);
-- data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1);
-- if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE,
-- MAP_PRIVATE | MAP_FIXED, fd, 0L))
-- exit(1);
-- for (i = 0; i < pagesize; ++i)
-- if (*(data + i) != *(data2 + i))
-- exit(1);
--
-- /*
-- * Finally, make sure that changes to the mapped area
-- * do not percolate back to the file as seen by read().
-- * (This is a bug on some variants of i386 svr4.0.)
-- */
-- for (i = 0; i < pagesize; ++i)
-- *(data2 + i) = *(data2 + i) + 1;
-- data3 = malloc(pagesize);
-- if (!data3)
-- exit(1);
-- if (read(fd, data3, pagesize) != pagesize)
-- exit(1);
-- for (i = 0; i < pagesize; ++i)
-- if (*(data + i) != *(data3 + i))
-- exit(1);
-- close(fd);
-- unlink("conftestmmap");
-- exit(0);
-+ char *data, *data2, *data3;
-+ int i, pagesize;
-+ int fd;
-+
-+ pagesize = getpagesize ();
-+
-+ /* First, make a file with some known garbage in it. */
-+ data = (char *) malloc (pagesize);
-+ if (!data)
-+ exit (1);
-+ for (i = 0; i < pagesize; ++i)
-+ *(data + i) = rand ();
-+ umask (0);
-+ fd = creat ("conftest.mmap", 0600);
-+ if (fd < 0)
-+ exit (1);
-+ if (write (fd, data, pagesize) != pagesize)
-+ exit (1);
-+ close (fd);
-+
-+ /* Next, try to mmap the file at a fixed address which already has
-+ something else allocated@it. If we can, also make sure that
-+ we see the same garbage. */
-+ fd = open ("conftest.mmap", O_RDWR);
-+ if (fd < 0)
-+ exit (1);
-+ data2 = (char *) malloc (2 * pagesize);
-+ if (!data2)
-+ exit (1);
-+ data2 += (pagesize - ((long) data2 & (pagesize - 1))) & (pagesize - 1);
-+ if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE,
-+ MAP_PRIVATE | MAP_FIXED, fd, 0L))
-+ exit (1);
-+ for (i = 0; i < pagesize; ++i)
-+ if (*(data + i) != *(data2 + i))
-+ exit (1);
-+
-+ /* Finally, make sure that changes to the mapped area do not
-+ percolate back to the file as seen by read(). (This is a bug on
-+ some variants of i386 svr4.0.) */
-+ for (i = 0; i < pagesize; ++i)
-+ *(data2 + i) = *(data2 + i) + 1;
-+ data3 = (char *) malloc (pagesize);
-+ if (!data3)
-+ exit (1);
-+ if (read (fd, data3, pagesize) != pagesize)
-+ exit (1);
-+ for (i = 0; i < pagesize; ++i)
-+ if (*(data + i) != *(data3 + i))
-+ exit (1);
-+ close (fd);
-+ exit (0);
- }
--
--EOF
--if { (eval echo configure:3154: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
--then
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_cv_func_mmap_fixed_mapped=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -fr conftest*
-- ac_cv_func_mmap_fixed_mapped=no
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+ac_cv_func_mmap_fixed_mapped=no
- fi
--rm -fr conftest*
-+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
- fi
--
- fi
--
--echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6
-+echo "$as_me:$LINENO: result: $ac_cv_func_mmap_fixed_mapped" >&5
-+echo "${ECHO_T}$ac_cv_func_mmap_fixed_mapped" >&6
- if test $ac_cv_func_mmap_fixed_mapped = yes; then
-- cat >> confdefs.h <<\EOF
-+
-+cat >>confdefs.h <<\_ACEOF
- #define HAVE_MMAP 1
--EOF
-+_ACEOF
-
- fi
-+rm -f conftest.mmap
-+
-+
-+
-
--
-- for ac_hdr in argz.h limits.h locale.h nl_types.h malloc.h string.h \
-+
-+
-+
-+
-+
-+
-+for ac_header in argz.h limits.h locale.h nl_types.h malloc.h string.h \
- unistd.h sys/param.h
- do
--ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
--echo "configure:3182: checking for $ac_hdr" >&5
--if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+else
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
- else
-- cat > conftest.$ac_ext <<EOF
--#line 3187 "configure"
--#include "confdefs.h"
--#include <$ac_hdr>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:3192: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=yes"
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=no"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+ yes:no: )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-+ ac_header_preproc=yes
-+ ;;
-+ no:yes:* )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------------ ##
-+## Report this to the AC_PACKAGE_NAME lists. ##
-+## ------------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ eval "$as_ac_Header=\$ac_header_preproc"
- fi
--rm -f conftest*
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+
- fi
--if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_hdr 1
--EOF
--
--else
-- echo "$ac_t""no" 1>&6
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
- fi
-+
- done
-
-- for ac_func in getcwd munmap putenv setenv setlocale strchr strcasecmp \
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+for ac_func in getcwd munmap putenv setenv setlocale strchr strcasecmp \
- strdup __argz_count __argz_stringify __argz_next
- do
--echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
--echo "configure:3222: checking for $ac_func" >&5
--if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 3227 "configure"
--#include "confdefs.h"
-+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define $ac_func innocuous_$ac_func
-+
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char $ac_func(); below. */
--#include <assert.h>
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char $ac_func();
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-
--int main() {
-+#undef $ac_func
-
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
- choke me
- #else
--$ac_func();
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:3250: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_$ac_func=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_$ac_func=no"
--fi
--rm -f conftest*
--fi
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_var=no"
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+_ACEOF
-
--if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_func 1
--EOF
--
--else
-- echo "$ac_t""no" 1>&6
- fi
- done
-
-
- if test "${ac_cv_func_stpcpy+set}" != "set"; then
-- for ac_func in stpcpy
-+
-+for ac_func in stpcpy
- do
--echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
--echo "configure:3279: checking for $ac_func" >&5
--if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 3284 "configure"
--#include "confdefs.h"
-+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define $ac_func innocuous_$ac_func
-+
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char $ac_func(); below. */
--#include <assert.h>
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char $ac_func();
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-
--int main() {
-+#undef $ac_func
-
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
- choke me
- #else
--$ac_func();
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:3307: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_$ac_func=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_$ac_func=no"
--fi
--rm -f conftest*
--fi
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_var=no"
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+_ACEOF
-
--if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_func 1
--EOF
--
--else
-- echo "$ac_t""no" 1>&6
- fi
- done
-
- fi
- if test "${ac_cv_func_stpcpy}" = "yes"; then
-- cat >> confdefs.h <<\EOF
-+ cat >>confdefs.h <<\_ACEOF
- #define HAVE_STPCPY 1
--EOF
-+_ACEOF
-
- fi
-
-- if test $ac_cv_header_locale_h = yes; then
-- echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
--echo "configure:3341: checking for LC_MESSAGES" >&5
--if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 3346 "configure"
--#include "confdefs.h"
--#include <locale.h>
--int main() {
--return LC_MESSAGES
--; return 0; }
--EOF
--if { (eval echo configure:3353: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- am_cv_val_LC_MESSAGES=yes
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- am_cv_val_LC_MESSAGES=no
--fi
--rm -f conftest*
--fi
--
--echo "$ac_t""$am_cv_val_LC_MESSAGES" 1>&6
-- if test $am_cv_val_LC_MESSAGES = yes; then
-- cat >> confdefs.h <<\EOF
--#define HAVE_LC_MESSAGES 1
--EOF
-
-- fi
-- fi
-- echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
--echo "configure:3374: checking whether NLS is requested" >&5
-+ echo "$as_me:$LINENO: checking whether NLS is requested" >&5
-+echo $ECHO_N "checking whether NLS is requested... $ECHO_C" >&6
- # Check whether --enable-nls or --disable-nls was given.
- if test "${enable_nls+set}" = set; then
- enableval="$enable_nls"
- USE_NLS=$enableval
- else
- USE_NLS=yes
--fi
-+fi;
-+ echo "$as_me:$LINENO: result: $USE_NLS" >&5
-+echo "${ECHO_T}$USE_NLS" >&6
-
-- echo "$ac_t""$USE_NLS" 1>&6
--
-
- USE_INCLUDED_LIBINTL=no
-
-@@ -3400,148 +21139,339 @@
- nls_cv_header_libgt=
- CATOBJEXT=NONE
-
-- ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
--echo "configure:3406: checking for libintl.h" >&5
--if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 3411 "configure"
--#include "confdefs.h"
-+ if test "${ac_cv_header_libintl_h+set}" = set; then
-+ echo "$as_me:$LINENO: checking for libintl.h" >&5
-+echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6
-+if test "${ac_cv_header_libintl_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5
-+echo "${ECHO_T}$ac_cv_header_libintl_h" >&6
-+else
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking libintl.h usability" >&5
-+echo $ECHO_N "checking libintl.h usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
- #include <libintl.h>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:3416: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=yes"
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking libintl.h presence" >&5
-+echo $ECHO_N "checking libintl.h presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <libintl.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=no"
--fi
--rm -f conftest*
-+ ac_cpp_err=yes
- fi
--if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- echo $ac_n "checking for dgettext in libc""... $ac_c" 1>&6
--echo "configure:3433: checking for dgettext in libc" >&5
--if eval "test \"`echo '$''{'gt_cv_func_dgettext_libc'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
- else
-- cat > conftest.$ac_ext <<EOF
--#line 3438 "configure"
--#include "confdefs.h"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+ yes:no: )
-+ { echo "$as_me:$LINENO: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: libintl.h: proceeding with the compiler's result" >&2;}
-+ ac_header_preproc=yes
-+ ;;
-+ no:yes:* )
-+ { echo "$as_me:$LINENO: WARNING: libintl.h: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: libintl.h: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: libintl.h: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: libintl.h: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: libintl.h: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: libintl.h: see the Autoconf documentation" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: libintl.h: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: libintl.h: in the future, the compiler will take precedence" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------------ ##
-+## Report this to the AC_PACKAGE_NAME lists. ##
-+## ------------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for libintl.h" >&5
-+echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6
-+if test "${ac_cv_header_libintl_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_header_libintl_h=$ac_header_preproc
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5
-+echo "${ECHO_T}$ac_cv_header_libintl_h" >&6
-+
-+fi
-+if test $ac_cv_header_libintl_h = yes; then
-+ echo "$as_me:$LINENO: checking for dgettext in libc" >&5
-+echo $ECHO_N "checking for dgettext in libc... $ECHO_C" >&6
-+if test "${gt_cv_func_dgettext_libc+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <libintl.h>
--int main() {
-+int
-+main ()
-+{
- return (int) dgettext ("","")
--; return 0; }
--EOF
--if { (eval echo configure:3445: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- gt_cv_func_dgettext_libc=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- gt_cv_func_dgettext_libc=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+gt_cv_func_dgettext_libc=no
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- fi
--
--echo "$ac_t""$gt_cv_func_dgettext_libc" 1>&6
-+echo "$as_me:$LINENO: result: $gt_cv_func_dgettext_libc" >&5
-+echo "${ECHO_T}$gt_cv_func_dgettext_libc" >&6
-
- if test "$gt_cv_func_dgettext_libc" != "yes"; then
-- echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
--echo "configure:3461: checking for bindtextdomain in -lintl" >&5
--ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ echo "$as_me:$LINENO: checking for bindtextdomain in -lintl" >&5
-+echo $ECHO_N "checking for bindtextdomain in -lintl... $ECHO_C" >&6
-+if test "${ac_cv_lib_intl_bindtextdomain+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-lintl $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 3469 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char bindtextdomain();
--
--int main() {
--bindtextdomain()
--; return 0; }
--EOF
--if { (eval echo configure:3480: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
--
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- echo $ac_n "checking for dgettext in libintl""... $ac_c" 1>&6
--echo "configure:3496: checking for dgettext in libintl" >&5
--if eval "test \"`echo '$''{'gt_cv_func_dgettext_libintl'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- echo $ac_n "checking for dgettext in -lintl""... $ac_c" 1>&6
--echo "configure:3501: checking for dgettext in -lintl" >&5
--ac_lib_var=`echo intl'_'dgettext | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ builtin and then its argument prototype would still apply. */
-+char bindtextdomain ();
-+int
-+main ()
-+{
-+bindtextdomain ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_intl_bindtextdomain=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_intl_bindtextdomain=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_intl_bindtextdomain" >&5
-+echo "${ECHO_T}$ac_cv_lib_intl_bindtextdomain" >&6
-+if test $ac_cv_lib_intl_bindtextdomain = yes; then
-+ echo "$as_me:$LINENO: checking for dgettext in libintl" >&5
-+echo $ECHO_N "checking for dgettext in libintl... $ECHO_C" >&6
-+if test "${gt_cv_func_dgettext_libintl+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ echo "$as_me:$LINENO: checking for dgettext in -lintl" >&5
-+echo $ECHO_N "checking for dgettext in -lintl... $ECHO_C" >&6
-+if test "${ac_cv_lib_intl_dgettext+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-lintl $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 3509 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char dgettext();
--
--int main() {
--dgettext()
--; return 0; }
--EOF
--if { (eval echo configure:3520: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
--
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+ builtin and then its argument prototype would still apply. */
-+char dgettext ();
-+int
-+main ()
-+{
-+dgettext ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_intl_dgettext=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_intl_dgettext=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dgettext" >&5
-+echo "${ECHO_T}$ac_cv_lib_intl_dgettext" >&6
-+if test $ac_cv_lib_intl_dgettext = yes; then
- gt_cv_func_dgettext_libintl=yes
- else
-- echo "$ac_t""no" 1>&6
--gt_cv_func_dgettext_libintl=no
-+ gt_cv_func_dgettext_libintl=no
- fi
-
- fi
--
--echo "$ac_t""$gt_cv_func_dgettext_libintl" 1>&6
--else
-- echo "$ac_t""no" 1>&6
-+echo "$as_me:$LINENO: result: $gt_cv_func_dgettext_libintl" >&5
-+echo "${ECHO_T}$gt_cv_func_dgettext_libintl" >&6
- fi
-
- fi
-@@ -3552,190 +21482,337 @@
-
- if test "$gt_cv_func_dgettext_libc" = "yes" \
- || test "$gt_cv_func_dgettext_libintl" = "yes"; then
-- cat >> confdefs.h <<\EOF
-+ cat >>confdefs.h <<\_ACEOF
- #define HAVE_GETTEXT 1
--EOF
-+_ACEOF
-+
-+
-+# Prepare PATH_SEPARATOR.
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
-+fi
-+
-+# Find out how to test for executable files. Don't use a zero-byte file,
-+# as systems may use methods other than mode bits to determine executability.
-+cat >conf$$.file <<_ASEOF
-+#! /bin/sh
-+exit 0
-+_ASEOF
-+chmod +x conf$$.file
-+if test -x conf$$.file >/dev/null 2>&1; then
-+ ac_executable_p="test -x"
-+else
-+ ac_executable_p="test -f"
-+fi
-+rm -f conf$$.file
-
-- # Extract the first word of "msgfmt", so it can be a program name with args.
-+# Extract the first word of "msgfmt", so it can be a program name with args.
- set dummy msgfmt; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:3563: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_path_MSGFMT+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- case "$MSGFMT" in
-- /*)
-- ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
-- ;;
-+ [\\/]* | ?:[\\/]*)
-+ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
-+ ;;
- *)
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-- for ac_dir in $PATH; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
-- ac_cv_path_MSGFMT="$ac_dir/$ac_word"
-- break
-- fi
-- fi
-- done
-- IFS="$ac_save_ifs"
-+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
-+ for ac_dir in $PATH; do
-+ IFS="$ac_save_IFS"
-+ test -z "$ac_dir" && ac_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
-+ echo "$as_me: trying $ac_dir/$ac_word..." >&5
-+ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
-+ ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext"
-+ break 2
-+ fi
-+ fi
-+ done
-+ done
-+ IFS="$ac_save_IFS"
- test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no"
-- ;;
-+ ;;
- esac
- fi
- MSGFMT="$ac_cv_path_MSGFMT"
--if test -n "$MSGFMT"; then
-- echo "$ac_t""$MSGFMT" 1>&6
-+if test "$MSGFMT" != "no"; then
-+ echo "$as_me:$LINENO: result: $MSGFMT" >&5
-+echo "${ECHO_T}$MSGFMT" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
- if test "$MSGFMT" != "no"; then
-- for ac_func in dcgettext
-+
-+for ac_func in dcgettext
- do
--echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
--echo "configure:3597: checking for $ac_func" >&5
--if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 3602 "configure"
--#include "confdefs.h"
-+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define $ac_func innocuous_$ac_func
-+
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char $ac_func(); below. */
--#include <assert.h>
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char $ac_func();
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-
--int main() {
-+#undef $ac_func
-
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
- choke me
- #else
--$ac_func();
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:3625: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_$ac_func=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_$ac_func=no"
--fi
--rm -f conftest*
--fi
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_var=no"
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+_ACEOF
-
--if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_func 1
--EOF
--
--else
-- echo "$ac_t""no" 1>&6
- fi
- done
-
- # Extract the first word of "gmsgfmt", so it can be a program name with args.
- set dummy gmsgfmt; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:3652: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_path_GMSGFMT+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- case "$GMSGFMT" in
-- /*)
-+ case $GMSGFMT in
-+ [\\/]* | ?:[\\/]*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
- ;;
-- ?:/*)
-- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
-- ;;
- *)
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
- ;;
- esac
- fi
--GMSGFMT="$ac_cv_path_GMSGFMT"
-+GMSGFMT=$ac_cv_path_GMSGFMT
-+
- if test -n "$GMSGFMT"; then
-- echo "$ac_t""$GMSGFMT" 1>&6
-+ echo "$as_me:$LINENO: result: $GMSGFMT" >&5
-+echo "${ECHO_T}$GMSGFMT" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+
-+# Prepare PATH_SEPARATOR.
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
-+fi
-+
-+# Find out how to test for executable files. Don't use a zero-byte file,
-+# as systems may use methods other than mode bits to determine executability.
-+cat >conf$$.file <<_ASEOF
-+#! /bin/sh
-+exit 0
-+_ASEOF
-+chmod +x conf$$.file
-+if test -x conf$$.file >/dev/null 2>&1; then
-+ ac_executable_p="test -x"
- else
-- echo "$ac_t""no" 1>&6
-+ ac_executable_p="test -f"
- fi
-+rm -f conf$$.file
-
-- # Extract the first word of "xgettext", so it can be a program name with args.
-+# Extract the first word of "xgettext", so it can be a program name with args.
- set dummy xgettext; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:3688: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_path_XGETTEXT+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- case "$XGETTEXT" in
-- /*)
-- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
-- ;;
-+ [\\/]* | ?:[\\/]*)
-+ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
-+ ;;
- *)
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-- for ac_dir in $PATH; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
-- ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
-- break
-- fi
-- fi
-- done
-- IFS="$ac_save_ifs"
-+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
-+ for ac_dir in $PATH; do
-+ IFS="$ac_save_IFS"
-+ test -z "$ac_dir" && ac_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
-+ echo "$as_me: trying $ac_dir/$ac_word..." >&5
-+ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
-+ ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext"
-+ break 2
-+ fi
-+ fi
-+ done
-+ done
-+ IFS="$ac_save_IFS"
- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
-- ;;
-+ ;;
- esac
- fi
- XGETTEXT="$ac_cv_path_XGETTEXT"
--if test -n "$XGETTEXT"; then
-- echo "$ac_t""$XGETTEXT" 1>&6
--else
-- echo "$ac_t""no" 1>&6
-+if test "$XGETTEXT" != ":"; then
-+ echo "$as_me:$LINENO: result: $XGETTEXT" >&5
-+echo "${ECHO_T}$XGETTEXT" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
-- cat > conftest.$ac_ext <<EOF
--#line 3720 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--int main() {
-+int
-+main ()
-+{
- extern int _nl_msg_cat_cntr;
- return _nl_msg_cat_cntr
--; return 0; }
--EOF
--if { (eval echo configure:3728: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- CATOBJEXT=.gmo
- DATADIRNAME=share
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- CATOBJEXT=.mo
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+CATOBJEXT=.mo
- DATADIRNAME=lib
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- INSTOBJEXT=.mo
- fi
- fi
-@@ -3746,151 +21823,226 @@
- INTLLIBS=-lintl
- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
- fi
--
--else
-- echo "$ac_t""no" 1>&6
-+
- fi
-
-
-+
- if test "$CATOBJEXT" = "NONE"; then
-- echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
--echo "configure:3758: checking whether catgets can be used" >&5
-- # Check whether --with-catgets or --without-catgets was given.
-+ echo "$as_me:$LINENO: checking whether catgets can be used" >&5
-+echo $ECHO_N "checking whether catgets can be used... $ECHO_C" >&6
-+
-+# Check whether --with-catgets or --without-catgets was given.
- if test "${with_catgets+set}" = set; then
- withval="$with_catgets"
- nls_cv_use_catgets=$withval
- else
- nls_cv_use_catgets=no
--fi
--
-- echo "$ac_t""$nls_cv_use_catgets" 1>&6
-+fi;
-+ echo "$as_me:$LINENO: result: $nls_cv_use_catgets" >&5
-+echo "${ECHO_T}$nls_cv_use_catgets" >&6
-
- if test "$nls_cv_use_catgets" = "yes"; then
-- echo $ac_n "checking for main in -li""... $ac_c" 1>&6
--echo "configure:3771: checking for main in -li" >&5
--ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+
-+echo "$as_me:$LINENO: checking for main in -li" >&5
-+echo $ECHO_N "checking for main in -li... $ECHO_C" >&6
-+if test "${ac_cv_lib_i_main+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-li $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 3779 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--int main() {
--main()
--; return 0; }
--EOF
--if { (eval echo configure:3786: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
-
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_lib=HAVE_LIB`echo i | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_lib 1
--EOF
-+int
-+main ()
-+{
-+main ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_i_main=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_i_main=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_i_main" >&5
-+echo "${ECHO_T}$ac_cv_lib_i_main" >&6
-+if test $ac_cv_lib_i_main = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_LIBI 1
-+_ACEOF
-
- LIBS="-li $LIBS"
-
--else
-- echo "$ac_t""no" 1>&6
- fi
-
-- echo $ac_n "checking for catgets""... $ac_c" 1>&6
--echo "configure:3814: checking for catgets" >&5
--if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 3819 "configure"
--#include "confdefs.h"
-+ echo "$as_me:$LINENO: checking for catgets" >&5
-+echo $ECHO_N "checking for catgets... $ECHO_C" >&6
-+if test "${ac_cv_func_catgets+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define catgets to an innocuous variant, in case <limits.h> declares catgets.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define catgets innocuous_catgets
-+
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char catgets(); below. */
--#include <assert.h>
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char catgets();
-+ which can conflict with char catgets (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-
--int main() {
-+#undef catgets
-
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char catgets ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_catgets) || defined (__stub___catgets)
- choke me
- #else
--catgets();
-+char (*f) () = catgets;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:3842: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_catgets=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_catgets=no"
--fi
--rm -f conftest*
--fi
--
--if eval "test \"`echo '$ac_cv_func_'catgets`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- cat >> confdefs.h <<\EOF
-+int
-+main ()
-+{
-+return f != catgets;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_catgets=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_func_catgets=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_catgets" >&5
-+echo "${ECHO_T}$ac_cv_func_catgets" >&6
-+if test $ac_cv_func_catgets = yes; then
-+ cat >>confdefs.h <<\_ACEOF
- #define HAVE_CATGETS 1
--EOF
-+_ACEOF
-
- INTLOBJS="\$(CATOBJS)"
- # Extract the first word of "gencat", so it can be a program name with args.
- set dummy gencat; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:3864: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_path_GENCAT'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_path_GENCAT+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- case "$GENCAT" in
-- /*)
-+ case $GENCAT in
-+ [\\/]* | ?:[\\/]*)
- ac_cv_path_GENCAT="$GENCAT" # Let the user override the test with a path.
- ;;
-- ?:/*)
-- ac_cv_path_GENCAT="$GENCAT" # Let the user override the test with a dos path.
-- ;;
- *)
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_path_GENCAT="$ac_dir/$ac_word"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_path_GENCAT="$as_dir/$ac_word$ac_exec_ext"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- test -z "$ac_cv_path_GENCAT" && ac_cv_path_GENCAT="no"
- ;;
- esac
- fi
--GENCAT="$ac_cv_path_GENCAT"
-+GENCAT=$ac_cv_path_GENCAT
-+
- if test -n "$GENCAT"; then
-- echo "$ac_t""$GENCAT" 1>&6
-+ echo "$as_me:$LINENO: result: $GENCAT" >&5
-+echo "${ECHO_T}$GENCAT" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
- # if test "$GENCAT" != "no"; then
- # AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
-@@ -3910,9 +22062,7 @@
- # nls_cv_header_intl=intl/libintl.h
- # nls_cv_header_libgt=intl/libgettext.h
- # fi
--
--else
-- echo "$ac_t""no" 1>&6
-+
- fi
-
- fi
-@@ -3924,9 +22074,9 @@
- fi
-
- if test "$nls_cv_use_gnu_gettext" != "yes"; then
-- cat >> confdefs.h <<\EOF
-+ cat >>confdefs.h <<\_ACEOF
- #define ENABLE_NLS 1
--EOF
-+_ACEOF
-
- else
- # Unset this variable since we use the non-zero value as a flag.
-@@ -3954,7 +22104,8 @@
- if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
- : ;
- else
-- echo "$ac_t""found xgettext program is not GNU xgettext; ignore it" 1>&6
-+ echo "$as_me:$LINENO: result: found xgettext program is not GNU xgettext; ignore it" >&5
-+echo "${ECHO_T}found xgettext program is not GNU xgettext; ignore it" >&6
- XGETTEXT=":"
- fi
- fi
-@@ -3966,8 +22117,17 @@
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
- fi
--
--
-+ ac_sources="$nls_cv_header_libgt"
-+ac_dests="$nls_cv_header_intl"
-+while test -n "$ac_sources"; do
-+ set $ac_dests; ac_dest=$1; shift; ac_dests=$*
-+ set $ac_sources; ac_source=$1; shift; ac_sources=$*
-+ ac_config_links_1="$ac_config_links_1 $ac_dest:$ac_source"
-+done
-+ ac_config_links="$ac_config_links $ac_config_links_1"
-+
-+ ac_config_commands="$ac_config_commands default-2"
-+
-
-
- # # If this is used in GNU gettext we have to set USE_NLS to `yes'
-@@ -3982,25 +22142,25 @@
- POFILES="$POFILES $lang.po"
- done
-
--
--
--
--
--
--
--
--
--
--
--
--
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-
- if test "x$CATOBJEXT" != "x"; then
- if test "x$ALL_LINGUAS" = "x"; then
- LINGUAS=
- else
-- echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
--echo "configure:4004: checking for catalogs to be installed" >&5
-+ echo "$as_me:$LINENO: checking for catalogs to be installed" >&5
-+echo $ECHO_N "checking for catalogs to be installed... $ECHO_C" >&6
- NEW_LINGUAS=
- for lang in ${LINGUAS=$ALL_LINGUAS}; do
- case "$ALL_LINGUAS" in
-@@ -4008,7 +22168,8 @@
- esac
- done
- LINGUAS=$NEW_LINGUAS
-- echo "$ac_t""$LINGUAS" 1>&6
-+ echo "$as_me:$LINENO: result: $LINGUAS" >&5
-+echo "${ECHO_T}$LINGUAS" >&6
- fi
-
- if test -n "$LINGUAS"; then
-@@ -4022,45 +22183,154 @@
- INCLUDE_LOCALE_H="\
- /* The system does not provide the header <locale.h>. Take care yourself. */"
- fi
--
-+
-
- test -d intl || mkdir intl
- if test "$CATOBJEXT" = ".cat"; then
-- ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
--echo "configure:4032: checking for linux/version.h" >&5
--if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 4037 "configure"
--#include "confdefs.h"
-+ if test "${ac_cv_header_linux_version_h+set}" = set; then
-+ echo "$as_me:$LINENO: checking for linux/version.h" >&5
-+echo $ECHO_N "checking for linux/version.h... $ECHO_C" >&6
-+if test "${ac_cv_header_linux_version_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_linux_version_h" >&5
-+echo "${ECHO_T}$ac_cv_header_linux_version_h" >&6
-+else
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking linux/version.h usability" >&5
-+echo $ECHO_N "checking linux/version.h usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
- #include <linux/version.h>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:4042: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=yes"
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking linux/version.h presence" >&5
-+echo $ECHO_N "checking linux/version.h presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <linux/version.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=no"
-+ ac_cpp_err=yes
- fi
--rm -f conftest*
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+ yes:no: )
-+ { echo "$as_me:$LINENO: WARNING: linux/version.h: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: linux/version.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: linux/version.h: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: linux/version.h: proceeding with the compiler's result" >&2;}
-+ ac_header_preproc=yes
-+ ;;
-+ no:yes:* )
-+ { echo "$as_me:$LINENO: WARNING: linux/version.h: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: linux/version.h: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: linux/version.h: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: linux/version.h: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: linux/version.h: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: linux/version.h: see the Autoconf documentation" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: linux/version.h: section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: linux/version.h: section \"Present But Cannot Be Compiled\"" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: linux/version.h: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: linux/version.h: proceeding with the preprocessor's result" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: linux/version.h: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: linux/version.h: in the future, the compiler will take precedence" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------------ ##
-+## Report this to the AC_PACKAGE_NAME lists. ##
-+## ------------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for linux/version.h" >&5
-+echo $ECHO_N "checking for linux/version.h... $ECHO_C" >&6
-+if test "${ac_cv_header_linux_version_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_header_linux_version_h=$ac_header_preproc
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_linux_version_h" >&5
-+echo "${ECHO_T}$ac_cv_header_linux_version_h" >&6
-+
- fi
--if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+if test $ac_cv_header_linux_version_h = yes; then
- msgformat=linux
- else
-- echo "$ac_t""no" 1>&6
--msgformat=xopen
-+ msgformat=xopen
- fi
-
-
-+
- sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
- fi
- sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
-@@ -4073,8 +22343,8 @@
- GT_NO=
- GT_YES="#YES#"
- fi
--
--
-+
-+
-
- MKINSTALLDIRS=
- if test -n "$ac_aux_dir"; then
-@@ -4083,10 +22353,10 @@
- if test -z "$MKINSTALLDIRS"; then
- MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
- fi
--
-+
-
- l=
--
-+
-
- test -d po || mkdir po
- if test "x$srcdir" != "x."; then
-@@ -4101,7 +22371,7 @@
- rm -f po/POTFILES
- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
- < $srcdir/po/POTFILES.in > po/POTFILES
--
-+
- LIBS="$LIBS $INTLLIBS"
-
- # AM_GTK_GNU_GETTEXT above substs $DATADIRNAME
-@@ -4109,117 +22379,208 @@
- gtklocaledir='${prefix}/${DATADIRNAME}/locale'
-
-
--echo $ac_n "checking for extra flags to get ANSI library prototypes""... $ac_c" 1>&6
--echo "configure:4114: checking for extra flags to get ANSI library prototypes" >&5
-+echo "$as_me:$LINENO: checking for extra flags to get ANSI library prototypes" >&5
-+echo $ECHO_N "checking for extra flags to get ANSI library prototypes... $ECHO_C" >&6
-
- gtk_save_LIBS=$LIBS
- LIBS="$LIBS -lm"
- if test "$cross_compiling" = yes; then
-- echo "$ac_t""none needed" 1>&6
-+ echo "$as_me:$LINENO: result: none needed" >&5
-+echo "${ECHO_T}none needed" >&6
-
- else
-- cat > conftest.$ac_ext <<EOF
--#line 4123 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <math.h>
- int main (void) { return (log(1) != log(1.)); }
--EOF
--if { (eval echo configure:4128: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
--then
-- echo "$ac_t""none needed" 1>&6
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -fr conftest*
-- gtk_save_CFLAGS=$CFLAGS
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ echo "$as_me:$LINENO: result: none needed" >&5
-+echo "${ECHO_T}none needed" >&6
-+else
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+gtk_save_CFLAGS=$CFLAGS
- CFLAGS="$CFLAGS -std1"
- if test "$cross_compiling" = yes; then
- true
--
-+
- else
-- cat > conftest.$ac_ext <<EOF
--#line 4142 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <math.h>
- int main (void) { return (log(1) != log(1.)); }
--EOF
--if { (eval echo configure:4147: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
--then
-- echo "$ac_t""-std1" 1>&6
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -fr conftest*
-- echo "$ac_t""" 1>&6
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ echo "$as_me:$LINENO: result: -std1" >&5
-+echo "${ECHO_T}-std1" >&6
-+else
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+echo "$as_me:$LINENO: result: " >&5
-+echo "${ECHO_T}" >&6
- CFLAGS=$gtk_save_CFLAGS
-- echo "configure: warning: No ANSI prototypes found in library. (-std1 didn't work.)" 1>&2
-+ { echo "$as_me:$LINENO: WARNING: No ANSI prototypes found in library. (-std1 didn't work.)" >&5
-+echo "$as_me: WARNING: No ANSI prototypes found in library. (-std1 didn't work.)" >&2;}
- fi
--rm -fr conftest*
-+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
- fi
--
- fi
--rm -fr conftest*
-+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
- fi
--
- LIBS=$gtk_save_LIBS
-
--echo $ac_n "checking for extra flags for POSIX compliance""... $ac_c" 1>&6
--echo "configure:4168: checking for extra flags for POSIX compliance" >&5
--cat > conftest.$ac_ext <<EOF
--#line 4170 "configure"
--#include "confdefs.h"
-+echo "$as_me:$LINENO: checking for extra flags for POSIX compliance" >&5
-+echo $ECHO_N "checking for extra flags for POSIX compliance... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <dirent.h>
--int main() {
-+int
-+main ()
-+{
- DIR *dir;
--; return 0; }
--EOF
--if { (eval echo configure:4177: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-- echo "$ac_t""none needed" 1>&6
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ echo "$as_me:$LINENO: result: none needed" >&5
-+echo "${ECHO_T}none needed" >&6
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- gtk_save_CFLAGS=$CFLAGS
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+gtk_save_CFLAGS=$CFLAGS
- CFLAGS="$CFLAGS -posix"
-- cat > conftest.$ac_ext <<EOF
--#line 4187 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <dirent.h>
--int main() {
-+int
-+main ()
-+{
- DIR *dir;
--; return 0; }
--EOF
--if { (eval echo configure:4194: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-- echo "$ac_t""-posix" 1>&6
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ echo "$as_me:$LINENO: result: -posix" >&5
-+echo "${ECHO_T}-posix" >&6
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- echo "$ac_t""" 1>&6
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+echo "$as_me:$LINENO: result: " >&5
-+echo "${ECHO_T}" >&6
- CFLAGS=$gtk_save_CFLAGS
-- echo "configure: warning: Could not determine POSIX flag. (-posix didn't work.)" 1>&2
-+ { echo "$as_me:$LINENO: WARNING: Could not determine POSIX flag. (-posix didn't work.)" >&5
-+echo "$as_me: WARNING: Could not determine POSIX flag. (-posix didn't work.)" >&2;}
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-
- if test x$with_glib = xyes ; then
-- { echo "configure: error:
--*** Directory must be specified for --with-glib" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error:
-+*** Directory must be specified for --with-glib" >&5
-+echo "$as_me: error:
-+*** Directory must be specified for --with-glib" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
--if test x$with_glib = x ; then
-+if test x$with_glib = x ; then
- # Look for separately installed glib
-
-- # Check whether --with-glib-prefix or --without-glib-prefix was given.
-+
-+# Check whether --with-glib-prefix or --without-glib-prefix was given.
- if test "${with_glib_prefix+set}" = set; then
- withval="$with_glib_prefix"
- glib_config_prefix="$withval"
- else
- glib_config_prefix=""
--fi
-+fi;
-
- # Check whether --with-glib-exec-prefix or --without-glib-exec-prefix was given.
- if test "${with_glib_exec_prefix+set}" = set; then
-@@ -4227,16 +22588,14 @@
- glib_config_exec_prefix="$withval"
- else
- glib_config_exec_prefix=""
--fi
--
-+fi;
- # Check whether --enable-glibtest or --disable-glibtest was given.
- if test "${enable_glibtest+set}" = set; then
- enableval="$enable_glibtest"
-- :
-+
- else
- enable_glibtest=yes
--fi
--
-+fi;
-
- if test x$glib_config_exec_prefix != x ; then
- glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
-@@ -4254,10 +22613,10 @@
- for module in . gmodule gthread
- do
- case "$module" in
-- gmodule)
-+ gmodule)
- glib_config_args="$glib_config_args gmodule"
- ;;
-- gthread)
-+ gthread)
- glib_config_args="$glib_config_args gthread"
- ;;
- esac
-@@ -4265,43 +22624,47 @@
-
- # Extract the first word of "glib-config", so it can be a program name with args.
- set dummy glib-config; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:4270: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_path_GLIB_CONFIG'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_path_GLIB_CONFIG+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- case "$GLIB_CONFIG" in
-- /*)
-+ case $GLIB_CONFIG in
-+ [\\/]* | ?:[\\/]*)
- ac_cv_path_GLIB_CONFIG="$GLIB_CONFIG" # Let the user override the test with a path.
-- ;;
-- ?:/*)
-- ac_cv_path_GLIB_CONFIG="$GLIB_CONFIG" # Let the user override the test with a dos path.
-- ;;
-- *)
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_path_GLIB_CONFIG="$ac_dir/$ac_word"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+ ;;
-+ *)
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_path_GLIB_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- test -z "$ac_cv_path_GLIB_CONFIG" && ac_cv_path_GLIB_CONFIG="no"
- ;;
- esac
- fi
--GLIB_CONFIG="$ac_cv_path_GLIB_CONFIG"
-+GLIB_CONFIG=$ac_cv_path_GLIB_CONFIG
-+
- if test -n "$GLIB_CONFIG"; then
-- echo "$ac_t""$GLIB_CONFIG" 1>&6
-+ echo "$as_me:$LINENO: result: $GLIB_CONFIG" >&5
-+echo "${ECHO_T}$GLIB_CONFIG" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
- min_glib_version=1.2.8
-- echo $ac_n "checking for GLIB - version >= $min_glib_version""... $ac_c" 1>&6
--echo "configure:4305: checking for GLIB - version >= $min_glib_version" >&5
-+ echo "$as_me:$LINENO: checking for GLIB - version >= $min_glib_version" >&5
-+echo $ECHO_N "checking for GLIB - version >= $min_glib_version... $ECHO_C" >&6
- no_glib=""
- if test "$GLIB_CONFIG" = "no" ; then
- no_glib=yes
-@@ -4323,15 +22686,18 @@
- if test "$cross_compiling" = yes; then
- echo $ac_n "cross compiling; assumed OK... $ac_c"
- else
-- cat > conftest.$ac_ext <<EOF
--#line 4328 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
- #include <glib.h>
- #include <stdio.h>
- #include <stdlib.h>
-
--int
-+int
- main ()
- {
- int major, minor, micro;
-@@ -4350,7 +22716,7 @@
- (glib_minor_version != $glib_config_minor_version) ||
- (glib_micro_version != $glib_config_micro_version))
- {
-- printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n",
-+ printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n",
- $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
- glib_major_version, glib_minor_version, glib_micro_version);
- printf ("*** was found! If glib-config was correct, then it is best\n");
-@@ -4361,7 +22727,7 @@
- printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n");
- printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n");
- printf("*** before re-running configure\n");
-- }
-+ }
- else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
- (glib_minor_version != GLIB_MINOR_VERSION) ||
- (glib_micro_version != GLIB_MICRO_VERSION))
-@@ -4399,28 +22765,40 @@
- return 1;
- }
-
--EOF
--if { (eval echo configure:4404: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
--then
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- :
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -fr conftest*
-- no_glib=yes
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+no_glib=yes
- fi
--rm -fr conftest*
-+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
- fi
--
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
- if test "x$no_glib" = x ; then
-- echo "$ac_t""yes" 1>&6
-- :
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
-+ :
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- if test "$GLIB_CONFIG" = "no" ; then
- echo "*** The glib-config script installed by GLIB could not be found"
- echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
-@@ -4433,19 +22811,45 @@
- echo "*** Could not run GLIB test program, checking why..."
- CFLAGS="$CFLAGS $GLIB_CFLAGS"
- LIBS="$LIBS $GLIB_LIBS"
-- cat > conftest.$ac_ext <<EOF
--#line 4438 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
- #include <glib.h>
- #include <stdio.h>
-
--int main() {
-- return ((glib_major_version) || (glib_minor_version) || (glib_micro_version));
--; return 0; }
--EOF
--if { (eval echo configure:4448: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-+int
-+main ()
-+{
-+ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version));
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- echo "*** The test program compiled, but did not run. This usually means"
- echo "*** that the run-time linker is not finding GLIB or finding the wrong"
- echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
-@@ -4459,29 +22863,34 @@
- echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
- echo "*** came with the system with the command"
- echo "***"
-- echo "*** rpm --erase --nodeps gtk gtk-devel"
-+ echo "*** rpm --erase --nodeps gtk gtk-devel"
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- echo "*** The test program failed to compile or link. See the file config.log for the"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ echo "*** The test program failed to compile or link. See the file config.log for the"
- echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
- echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
-- echo "*** may want to edit the glib-config script: $GLIB_CONFIG"
-+ echo "*** may want to edit the glib-config script: $GLIB_CONFIG"
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
- GLIB_CFLAGS=""
- GLIB_LIBS=""
-- { echo "configure: error:
-+ { { echo "$as_me:$LINENO: error:
-+*** GLIB 1.2.8 or better is required. The latest version of GLIB
-+*** is always available from ftp://ftp.gtk.org/." >&5
-+echo "$as_me: error:
- *** GLIB 1.2.8 or better is required. The latest version of GLIB
--*** is always available from ftp://ftp.gtk.org/." 1>&2; exit 1; }
-+*** is always available from ftp://ftp.gtk.org/." >&2;}
-+ { (exit 1); exit 1; }; }
- fi
--
--
-+
-+
- rm -f conf.glibtest
-
-
-@@ -4496,10 +22905,12 @@
- # Use uninstalled glib (assume they got the version right)
-
- GLIB_CONFIG=$with_glib/glib-config
-- if test -x $GLIB_CONFIG ; then
-+ if test -x $GLIB_CONFIG ; then
- :
- else
-- { echo "configure: error: GLIB directory ($with_glib) not present or not configured" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: GLIB directory ($with_glib) not present or not configured" >&5
-+echo "$as_me: error: GLIB directory ($with_glib) not present or not configured" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
- # For use in gtk-config
-@@ -4511,7 +22922,7 @@
- glib_release=`$GLIB_CONFIG --version | sed 's%\\.[0-9]*$%%'`
-
- # canonicalize relative paths
-- case $with_glib in
-+ case $with_glib in
- /*)
- glib_dir=$with_glib
- ;;
-@@ -4524,8 +22935,8 @@
- GLIB_LIBS="$glib_dir/libglib.la $glib_dir/gmodule/libgmodule.la"
- GLIB_DEPLIBS=
-
--
--
-+
-+
- fi
-
-
-@@ -4535,19 +22946,18 @@
-
-
- # Find the X11 include and library directories
--# If we find X, set shell vars x_includes and x_libraries to the
--# paths, otherwise set no_x=yes.
--# Uses ac_ vars as temps to allow command line to override cache and checks.
--# --without-x overrides everything else, but does not touch the cache.
--echo $ac_n "checking for X""... $ac_c" 1>&6
--echo "configure:4544: checking for X" >&5
-+
-+if test "x$ac_path_x_has_been_run" != xyes; then
-+ echo "$as_me:$LINENO: checking for X" >&5
-+echo $ECHO_N "checking for X... $ECHO_C" >&6
-+
-+ac_path_x_has_been_run=yes
-
- # Check whether --with-x or --without-x was given.
- if test "${with_x+set}" = set; then
- withval="$with_x"
-- :
--fi
-
-+fi;
- # $have_x is `yes', `no', `disabled', or empty when we do not yet know.
- if test "x$with_x" = xno; then
- # The user explicitly disabled X.
-@@ -4557,207 +22967,209 @@
- # Both variables are already set.
- have_x=yes
- else
--if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ if test "${ac_cv_have_x+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- # One or both of the vars are not set, and there is no cached value.
--ac_x_includes=NO ac_x_libraries=NO
--rm -fr conftestdir
--if mkdir conftestdir; then
-- cd conftestdir
-+ac_x_includes=no ac_x_libraries=no
-+rm -fr conftest.dir
-+if mkdir conftest.dir; then
-+ cd conftest.dir
- # Make sure to not put "make" in the Imakefile rules, since we grep it out.
-- cat > Imakefile <<'EOF'
-+ cat >Imakefile <<'_ACEOF'
- acfindx:
- @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
--EOF
-+_ACEOF
- if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
- # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
- eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
- # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
- for ac_extension in a so sl; do
- if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
-- test -f $ac_im_libdir/libX11.$ac_extension; then
-- ac_im_usrlibdir=$ac_im_libdir; break
-+ test -f $ac_im_libdir/libX11.$ac_extension; then
-+ ac_im_usrlibdir=$ac_im_libdir; break
- fi
- done
- # Screen out bogus values from the imake configuration. They are
- # bogus both because they are the default anyway, and because
- # using them would break gcc on systems where it needs fixed includes.
-- case "$ac_im_incroot" in
-+ case $ac_im_incroot in
- /usr/include) ;;
-- *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;;
-+ *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;;
- esac
-- case "$ac_im_usrlibdir" in
-+ case $ac_im_usrlibdir in
- /usr/lib | /lib) ;;
-- *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;;
-+ *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;;
- esac
- fi
- cd ..
-- rm -fr conftestdir
-+ rm -fr conftest.dir
- fi
-
--if test "$ac_x_includes" = NO; then
-- # Guess where to find include files, by looking for this one X11 .h file.
-- test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
-+# Standard set of common directories for X headers.
-+# Check X11 before X11Rn because it is often a symlink to the current release.
-+ac_x_header_dirs='
-+/usr/X11/include
-+/usr/X11R6/include
-+/usr/X11R5/include
-+/usr/X11R4/include
-+
-+/usr/include/X11
-+/usr/include/X11R6
-+/usr/include/X11R5
-+/usr/include/X11R4
-+
-+/usr/local/X11/include
-+/usr/local/X11R6/include
-+/usr/local/X11R5/include
-+/usr/local/X11R4/include
-+
-+/usr/local/include/X11
-+/usr/local/include/X11R6
-+/usr/local/include/X11R5
-+/usr/local/include/X11R4
-+
-+/usr/X386/include
-+/usr/x386/include
-+/usr/XFree86/include/X11
-+
-+/usr/include
-+/usr/local/include
-+/usr/unsupported/include
-+/usr/athena/include
-+/usr/local/x11r5/include
-+/usr/lpp/Xamples/include
-+
-+/usr/openwin/include
-+/usr/openwin/share/include'
-
-+if test "$ac_x_includes" = no; then
-+ # Guess where to find include files, by looking for a specified header file.
- # First, try using that file with no special directory specified.
--cat > conftest.$ac_ext <<EOF
--#line 4606 "configure"
--#include "confdefs.h"
--#include <$x_direct_test_include>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:4611: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <X11/Xlib.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
- # We can compile using X headers with no special include directory.
- ac_x_includes=
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- # Look for the header file in a standard set of common directories.
--# Check X11 before X11Rn because it is often a symlink to the current release.
-- for ac_dir in \
-- /usr/X11/include \
-- /usr/X11R6/include \
-- /usr/X11R5/include \
-- /usr/X11R4/include \
-- \
-- /usr/include/X11 \
-- /usr/include/X11R6 \
-- /usr/include/X11R5 \
-- /usr/include/X11R4 \
-- \
-- /usr/local/X11/include \
-- /usr/local/X11R6/include \
-- /usr/local/X11R5/include \
-- /usr/local/X11R4/include \
-- \
-- /usr/local/include/X11 \
-- /usr/local/include/X11R6 \
-- /usr/local/include/X11R5 \
-- /usr/local/include/X11R4 \
-- \
-- /usr/X386/include \
-- /usr/x386/include \
-- /usr/XFree86/include/X11 \
-- \
-- /usr/include \
-- /usr/local/include \
-- /usr/unsupported/include \
-- /usr/athena/include \
-- /usr/local/x11r5/include \
-- /usr/lpp/Xamples/include \
-- \
-- /usr/openwin/include \
-- /usr/openwin/share/include \
-- ; \
-- do
-- if test -r "$ac_dir/$x_direct_test_include"; then
-- ac_x_includes=$ac_dir
-- break
-- fi
-- done
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ for ac_dir in $ac_x_header_dirs; do
-+ if test -r "$ac_dir/X11/Xlib.h"; then
-+ ac_x_includes=$ac_dir
-+ break
-+ fi
-+done
- fi
--rm -f conftest*
--fi # $ac_x_includes = NO
-+rm -f conftest.err conftest.$ac_ext
-+fi # $ac_x_includes = no
-
--if test "$ac_x_libraries" = NO; then
-+if test "$ac_x_libraries" = no; then
- # Check for the libraries.
--
-- test -z "$x_direct_test_library" && x_direct_test_library=Xt
-- test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
--
- # See if we find them without any special options.
- # Don't add to $LIBS permanently.
-- ac_save_LIBS="$LIBS"
-- LIBS="-l$x_direct_test_library $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 4680 "configure"
--#include "confdefs.h"
--
--int main() {
--${x_direct_test_function}()
--; return 0; }
--EOF
--if { (eval echo configure:4687: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- LIBS="$ac_save_LIBS"
-+ ac_save_LIBS=$LIBS
-+ LIBS="-lX11 $LIBS"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <X11/Xlib.h>
-+int
-+main ()
-+{
-+XrmInitialize ()
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ LIBS=$ac_save_LIBS
- # We can link X programs with no special library path.
- ac_x_libraries=
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- LIBS="$ac_save_LIBS"
--# First see if replacing the include by lib works.
--# Check X11 before X11Rn because it is often a symlink to the current release.
--for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \
-- /usr/X11/lib \
-- /usr/X11R6/lib \
-- /usr/X11R5/lib \
-- /usr/X11R4/lib \
-- \
-- /usr/lib/X11 \
-- /usr/lib/X11R6 \
-- /usr/lib/X11R5 \
-- /usr/lib/X11R4 \
-- \
-- /usr/local/X11/lib \
-- /usr/local/X11R6/lib \
-- /usr/local/X11R5/lib \
-- /usr/local/X11R4/lib \
-- \
-- /usr/local/lib/X11 \
-- /usr/local/lib/X11R6 \
-- /usr/local/lib/X11R5 \
-- /usr/local/lib/X11R4 \
-- \
-- /usr/X386/lib \
-- /usr/x386/lib \
-- /usr/XFree86/lib/X11 \
-- \
-- /usr/lib \
-- /usr/local/lib \
-- /usr/unsupported/lib \
-- /usr/athena/lib \
-- /usr/local/x11r5/lib \
-- /usr/lpp/Xamples/lib \
-- /lib/usr/lib/X11 \
-- \
-- /usr/openwin/lib \
-- /usr/openwin/share/lib \
-- ; \
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+LIBS=$ac_save_LIBS
-+for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g`
- do
-+ # Don't even attempt the hair of trying to link an X program!
- for ac_extension in a so sl; do
-- if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
-+ if test -r $ac_dir/libX11.$ac_extension; then
- ac_x_libraries=$ac_dir
- break 2
- fi
- done
- done
- fi
--rm -f conftest*
--fi # $ac_x_libraries = NO
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi # $ac_x_libraries = no
-
--if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then
-+if test "$ac_x_includes" = no || test "$ac_x_libraries" = no; then
- # Didn't find X anywhere. Cache the known absence of X.
- ac_cv_have_x="have_x=no"
- else
- # Record where we found X for the cache.
- ac_cv_have_x="have_x=yes \
-- ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
-+ ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
- fi
- fi
-+
- fi
- eval "$ac_cv_have_x"
- fi # $with_x != no
-
- if test "$have_x" != yes; then
-- echo "$ac_t""$have_x" 1>&6
-+ echo "$as_me:$LINENO: result: $have_x" >&5
-+echo "${ECHO_T}$have_x" >&6
- no_x=yes
- else
- # If each of the values was on the command line, it overrides each guess.
-@@ -4766,14 +23178,21 @@
- # Update the cache value to reflect the command line values.
- ac_cv_have_x="have_x=yes \
- ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
-- echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6
-+ # It might be that x_includes is empty (headers are found in the
-+ # standard search path. Then output the corresponding message
-+ ac_out_x_includes=$x_includes
-+ test "x$x_includes" = x && ac_out_x_includes="in standard search path"
-+ echo "$as_me:$LINENO: result: libraries $x_libraries, headers $ac_out_x_includes" >&5
-+echo "${ECHO_T}libraries $x_libraries, headers $ac_out_x_includes" >&6
- fi
-
-+fi
- if test "$no_x" = yes; then
- # Not all programs may use this symbol, but it does not hurt to define it.
-- cat >> confdefs.h <<\EOF
-+
-+cat >>confdefs.h <<\_ACEOF
- #define X_DISPLAY_MISSING 1
--EOF
-+_ACEOF
-
- X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS=
- else
-@@ -4786,60 +23205,117 @@
- X_LIBS="$X_LIBS -L$x_libraries"
- # For Solaris; some versions of Sun CC require a space after -R and
- # others require no space. Words are not sufficient . . . .
-- case "`(uname -sr) 2>/dev/null`" in
-+ case `(uname -sr) 2>/dev/null` in
- "SunOS 5"*)
-- echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
--echo "configure:4793: checking whether -R must be followed by a space" >&5
-- ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
-- cat > conftest.$ac_ext <<EOF
--#line 4796 "configure"
--#include "confdefs.h"
-+ echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5
-+echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6
-+ ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--int main() {
-+int
-+main ()
-+{
-
--; return 0; }
--EOF
--if { (eval echo configure:4803: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_R_nospace=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_R_nospace=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_R_nospace=no
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- if test $ac_R_nospace = yes; then
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- X_LIBS="$X_LIBS -R$x_libraries"
- else
- LIBS="$ac_xsave_LIBS -R $x_libraries"
-- cat > conftest.$ac_ext <<EOF
--#line 4819 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--int main() {
-+int
-+main ()
-+{
-
--; return 0; }
--EOF
--if { (eval echo configure:4826: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_R_space=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_R_space=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_R_space=no
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
- if test $ac_R_space = yes; then
-- echo "$ac_t""yes" 1>&6
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
- X_LIBS="$X_LIBS -R $x_libraries"
- else
-- echo "$ac_t""neither works" 1>&6
-+ echo "$as_me:$LINENO: result: neither works" >&5
-+echo "${ECHO_T}neither works" >&6
- fi
- fi
-- LIBS="$ac_xsave_LIBS"
-+ LIBS=$ac_xsave_LIBS
- esac
- fi
-
-@@ -4850,528 +23326,1222 @@
- if test "$ISC" = yes; then
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet"
- else
-- # Martyn.Johnson at cl.cam.ac.uk says this is needed for Ultrix, if the X
-- # libraries were built with DECnet support. And karl at cs.umb.edu says
-+ # Martyn Johnson says this is needed for Ultrix, if the X
-+ # libraries were built with DECnet support. And Karl Berry says
- # the Alpha needs dnet_stub (dnet does not exist).
-- echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
--echo "configure:4858: checking for dnet_ntoa in -ldnet" >&5
--ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- ac_save_LIBS="$LIBS"
--LIBS="-ldnet $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 4866 "configure"
--#include "confdefs.h"
-+ ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char dnet_ntoa();
-+ builtin and then its argument prototype would still apply. */
-+char XOpenDisplay ();
-+int
-+main ()
-+{
-+XOpenDisplay ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
--int main() {
--dnet_ntoa()
--; return 0; }
--EOF
--if { (eval echo configure:4877: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
-+echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5
-+echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6
-+if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-ldnet $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char dnet_ntoa ();
-+int
-+main ()
-+{
-+dnet_ntoa ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_dnet_dnet_ntoa=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_dnet_dnet_ntoa=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5
-+echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6
-+if test $ac_cv_lib_dnet_dnet_ntoa = yes; then
- X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
--else
-- echo "$ac_t""no" 1>&6
- fi
-
- if test $ac_cv_lib_dnet_dnet_ntoa = no; then
-- echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
--echo "configure:4899: checking for dnet_ntoa in -ldnet_stub" >&5
--ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5
-+echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6
-+if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-ldnet_stub $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 4907 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char dnet_ntoa();
--
--int main() {
--dnet_ntoa()
--; return 0; }
--EOF
--if { (eval echo configure:4918: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
--
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+ builtin and then its argument prototype would still apply. */
-+char dnet_ntoa ();
-+int
-+main ()
-+{
-+dnet_ntoa ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_dnet_stub_dnet_ntoa=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_dnet_stub_dnet_ntoa=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5
-+echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6
-+if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then
- X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
--else
-- echo "$ac_t""no" 1>&6
- fi
-
- fi
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+ LIBS="$ac_xsave_LIBS"
-
- # msh at cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT,
- # to get the SysV transport functions.
-- # chad at anasazi.com says the Pyramis MIS-ES running DC/OSx (SVR4)
-+ # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4)
- # needs -lnsl.
- # The nsl library prevents programs from opening the X display
-- # on Irix 5.2, according to dickey at clark.net.
-- echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
--echo "configure:4947: checking for gethostbyname" >&5
--if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 4952 "configure"
--#include "confdefs.h"
-+ # on Irix 5.2, according to T.E. Dickey.
-+ # The functions gethostbyname, getservbyname, and inet_addr are
-+ # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking.
-+ echo "$as_me:$LINENO: checking for gethostbyname" >&5
-+echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6
-+if test "${ac_cv_func_gethostbyname+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define gethostbyname to an innocuous variant, in case <limits.h> declares gethostbyname.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define gethostbyname innocuous_gethostbyname
-+
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char gethostbyname(); below. */
--#include <assert.h>
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char gethostbyname();
-+ which can conflict with char gethostbyname (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-
--int main() {
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-
-+#undef gethostbyname
-+
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char gethostbyname ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
- choke me
- #else
--gethostbyname();
-+char (*f) () = gethostbyname;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:4975: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_gethostbyname=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_gethostbyname=no"
--fi
--rm -f conftest*
--fi
-+int
-+main ()
-+{
-+return f != gethostbyname;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_gethostbyname=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
--if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- :
--else
-- echo "$ac_t""no" 1>&6
-+ac_cv_func_gethostbyname=no
- fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5
-+echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6
-
- if test $ac_cv_func_gethostbyname = no; then
-- echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
--echo "configure:4996: checking for gethostbyname in -lnsl" >&5
--ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5
-+echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6
-+if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-lnsl $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 5004 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char gethostbyname();
--
--int main() {
--gethostbyname()
--; return 0; }
--EOF
--if { (eval echo configure:5015: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
-+ builtin and then its argument prototype would still apply. */
-+char gethostbyname ();
-+int
-+main ()
-+{
-+gethostbyname ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_nsl_gethostbyname=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_nsl_gethostbyname=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5
-+echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6
-+if test $ac_cv_lib_nsl_gethostbyname = yes; then
-+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
- fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
-
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
--else
-- echo "$ac_t""no" 1>&6
-+ if test $ac_cv_lib_nsl_gethostbyname = no; then
-+ echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5
-+echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6
-+if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-lbsd $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char gethostbyname ();
-+int
-+main ()
-+{
-+gethostbyname ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_bsd_gethostbyname=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_bsd_gethostbyname=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5
-+echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6
-+if test $ac_cv_lib_bsd_gethostbyname = yes; then
-+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd"
- fi
-
-+ fi
- fi
-
- # lieder at skyler.mavd.honeywell.com says without -lsocket,
- # socket/setsockopt and other routines are undefined under SCO ODT
- # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary
-- # on later versions), says simon at lia.di.epfl.ch: it contains
-- # gethostby* variants that don't use the nameserver (or something).
-- # -lsocket must be given before -lnsl if both are needed.
-- # We assume that if connect needs -lnsl, so does gethostbyname.
-- echo $ac_n "checking for connect""... $ac_c" 1>&6
--echo "configure:5045: checking for connect" >&5
--if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 5050 "configure"
--#include "confdefs.h"
-+ # on later versions), says Simon Leinen: it contains gethostby*
-+ # variants that don't use the name server (or something). -lsocket
-+ # must be given before -lnsl if both are needed. We assume that
-+ # if connect needs -lnsl, so does gethostbyname.
-+ echo "$as_me:$LINENO: checking for connect" >&5
-+echo $ECHO_N "checking for connect... $ECHO_C" >&6
-+if test "${ac_cv_func_connect+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define connect to an innocuous variant, in case <limits.h> declares connect.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define connect innocuous_connect
-+
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char connect(); below. */
--#include <assert.h>
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char connect();
-+ which can conflict with char connect (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-
--int main() {
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-
-+#undef connect
-+
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char connect ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_connect) || defined (__stub___connect)
- choke me
- #else
--connect();
-+char (*f) () = connect;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:5073: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_connect=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_connect=no"
--fi
--rm -f conftest*
--fi
-+int
-+main ()
-+{
-+return f != connect;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_connect=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
--if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- :
--else
-- echo "$ac_t""no" 1>&6
-+ac_cv_func_connect=no
- fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5
-+echo "${ECHO_T}$ac_cv_func_connect" >&6
-
- if test $ac_cv_func_connect = no; then
-- echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
--echo "configure:5094: checking for connect in -lsocket" >&5
--ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ echo "$as_me:$LINENO: checking for connect in -lsocket" >&5
-+echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6
-+if test "${ac_cv_lib_socket_connect+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 5102 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char connect();
--
--int main() {
--connect()
--; return 0; }
--EOF
--if { (eval echo configure:5113: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
--
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+ builtin and then its argument prototype would still apply. */
-+char connect ();
-+int
-+main ()
-+{
-+connect ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_socket_connect=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_socket_connect=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5
-+echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6
-+if test $ac_cv_lib_socket_connect = yes; then
- X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
--else
-- echo "$ac_t""no" 1>&6
- fi
-
- fi
-
-- # gomez at mi.uni-erlangen.de says -lposix is necessary on A/UX.
-- echo $ac_n "checking for remove""... $ac_c" 1>&6
--echo "configure:5137: checking for remove" >&5
--if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 5142 "configure"
--#include "confdefs.h"
-+ # Guillermo Gomez says -lposix is necessary on A/UX.
-+ echo "$as_me:$LINENO: checking for remove" >&5
-+echo $ECHO_N "checking for remove... $ECHO_C" >&6
-+if test "${ac_cv_func_remove+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define remove to an innocuous variant, in case <limits.h> declares remove.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define remove innocuous_remove
-+
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char remove(); below. */
--#include <assert.h>
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char remove();
-+ which can conflict with char remove (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-
--int main() {
-+#undef remove
-
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char remove ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_remove) || defined (__stub___remove)
- choke me
- #else
--remove();
-+char (*f) () = remove;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:5165: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_remove=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_remove=no"
--fi
--rm -f conftest*
--fi
-+int
-+main ()
-+{
-+return f != remove;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_remove=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
--if eval "test \"`echo '$ac_cv_func_'remove`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- :
--else
-- echo "$ac_t""no" 1>&6
-+ac_cv_func_remove=no
- fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5
-+echo "${ECHO_T}$ac_cv_func_remove" >&6
-
- if test $ac_cv_func_remove = no; then
-- echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
--echo "configure:5186: checking for remove in -lposix" >&5
--ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ echo "$as_me:$LINENO: checking for remove in -lposix" >&5
-+echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6
-+if test "${ac_cv_lib_posix_remove+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-lposix $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 5194 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char remove();
--
--int main() {
--remove()
--; return 0; }
--EOF
--if { (eval echo configure:5205: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
--
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+ builtin and then its argument prototype would still apply. */
-+char remove ();
-+int
-+main ()
-+{
-+remove ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_posix_remove=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_posix_remove=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5
-+echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6
-+if test $ac_cv_lib_posix_remove = yes; then
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
--else
-- echo "$ac_t""no" 1>&6
- fi
-
- fi
-
- # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
-- echo $ac_n "checking for shmat""... $ac_c" 1>&6
--echo "configure:5229: checking for shmat" >&5
--if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 5234 "configure"
--#include "confdefs.h"
-+ echo "$as_me:$LINENO: checking for shmat" >&5
-+echo $ECHO_N "checking for shmat... $ECHO_C" >&6
-+if test "${ac_cv_func_shmat+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define shmat to an innocuous variant, in case <limits.h> declares shmat.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define shmat innocuous_shmat
-+
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char shmat(); below. */
--#include <assert.h>
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char shmat();
-+ which can conflict with char shmat (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-
--int main() {
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-
-+#undef shmat
-+
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char shmat ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_shmat) || defined (__stub___shmat)
- choke me
- #else
--shmat();
-+char (*f) () = shmat;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:5257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_shmat=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_shmat=no"
--fi
--rm -f conftest*
--fi
-+int
-+main ()
-+{
-+return f != shmat;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_shmat=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
--if eval "test \"`echo '$ac_cv_func_'shmat`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- :
--else
-- echo "$ac_t""no" 1>&6
-+ac_cv_func_shmat=no
- fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5
-+echo "${ECHO_T}$ac_cv_func_shmat" >&6
-
- if test $ac_cv_func_shmat = no; then
-- echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
--echo "configure:5278: checking for shmat in -lipc" >&5
--ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ echo "$as_me:$LINENO: checking for shmat in -lipc" >&5
-+echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6
-+if test "${ac_cv_lib_ipc_shmat+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-lipc $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 5286 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char shmat();
--
--int main() {
--shmat()
--; return 0; }
--EOF
--if { (eval echo configure:5297: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
--
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+ builtin and then its argument prototype would still apply. */
-+char shmat ();
-+int
-+main ()
-+{
-+shmat ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_ipc_shmat=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_ipc_shmat=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5
-+echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6
-+if test $ac_cv_lib_ipc_shmat = yes; then
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
--else
-- echo "$ac_t""no" 1>&6
- fi
-
- fi
- fi
-
- # Check for libraries that X11R6 Xt/Xaw programs need.
-- ac_save_LDFLAGS="$LDFLAGS"
-+ ac_save_LDFLAGS=$LDFLAGS
- test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries"
- # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
- # check for ICE first), but we must link in the order -lSM -lICE or
- # we get undefined symbols. So assume we have SM if we have ICE.
- # These have to be linked with before -lX11, unlike the other
- # libraries we check for below, so use a different variable.
-- # --interran at uluru.Stanford.EDU, kb at cs.umb.edu.
-- echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
--echo "configure:5330: checking for IceConnectionNumber in -lICE" >&5
--ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ # John Interrante, Karl Berry
-+ echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5
-+echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6
-+if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-lICE $X_EXTRA_LIBS $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 5338 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char IceConnectionNumber();
-+ builtin and then its argument prototype would still apply. */
-+char IceConnectionNumber ();
-+int
-+main ()
-+{
-+IceConnectionNumber ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_ICE_IceConnectionNumber=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_ICE_IceConnectionNumber=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5
-+echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6
-+if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then
-+ X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
-+fi
-
--int main() {
--IceConnectionNumber()
--; return 0; }
--EOF
--if { (eval echo configure:5349: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
-+ LDFLAGS=$ac_save_LDFLAGS
-+
-+fi
-+
-+
-+
-+
-+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
-+ case $PKG_CONFIG in
-+ [\\/]* | ?:[\\/]*)
-+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
-+ ;;
-+ *)
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+ ;;
-+esac
- fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
-+PKG_CONFIG=$ac_cv_path_PKG_CONFIG
-
-+if test -n "$PKG_CONFIG"; then
-+ echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5
-+echo "${ECHO_T}$PKG_CONFIG" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
-+
-+fi
-+if test -z "$ac_cv_path_PKG_CONFIG"; then
-+ ac_pt_PKG_CONFIG=$PKG_CONFIG
-+ # Extract the first word of "pkg-config", so it can be a program name with args.
-+set dummy pkg-config; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ case $ac_pt_PKG_CONFIG in
-+ [\\/]* | ?:[\\/]*)
-+ ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
-+ ;;
-+ *)
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+ ;;
-+esac
-+fi
-+ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
-+
-+if test -n "$ac_pt_PKG_CONFIG"; then
-+ echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5
-+echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+ PKG_CONFIG=$ac_pt_PKG_CONFIG
-+else
-+ PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
-+fi
-+
-+fi
-+if test -n "$PKG_CONFIG"; then
-+ _pkg_min_version=0.9.0
-+ echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5
-+echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6
-+ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
-+ else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+ PKG_CONFIG=""
-+ fi
-+
-+fi
-+
-+pkg_failed=no
-+echo "$as_me:$LINENO: checking for X" >&5
-+echo $ECHO_N "checking for X... $ECHO_C" >&6
-+
-+if test -n "$PKG_CONFIG"; then
-+ if test -n "$X_CFLAGS"; then
-+ pkg_cv_X_CFLAGS="$X_CFLAGS"
-+ else
-+ if test -n "$PKG_CONFIG" && \
-+ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"x11 xau\"") >&5
-+ ($PKG_CONFIG --exists --print-errors "x11 xau") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ pkg_cv_X_CFLAGS=`$PKG_CONFIG --cflags "x11 xau" 2>/dev/null`
-+else
-+ pkg_failed=yes
-+fi
-+ fi
-+else
-+ pkg_failed=untried
-+fi
-+if test -n "$PKG_CONFIG"; then
-+ if test -n "$X_LIBS"; then
-+ pkg_cv_X_LIBS="$X_LIBS"
-+ else
-+ if test -n "$PKG_CONFIG" && \
-+ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"x11 xau\"") >&5
-+ ($PKG_CONFIG --exists --print-errors "x11 xau") 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ pkg_cv_X_LIBS=`$PKG_CONFIG --libs "x11 xau" 2>/dev/null`
-+else
-+ pkg_failed=yes
-+fi
-+ fi
- else
-- echo "$ac_t""no" 1>&6
-+ pkg_failed=untried
- fi
-
-- LDFLAGS="$ac_save_LDFLAGS"
-
-+
-+if test $pkg_failed = yes; then
-+
-+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
-+ _pkg_short_errors_supported=yes
-+else
-+ _pkg_short_errors_supported=no
- fi
-+ if test $_pkg_short_errors_supported = yes; then
-+ X_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "x11 xau"`
-+ else
-+ X_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "x11 xau"`
-+ fi
-+ # Put the nasty error message in config.log where it belongs
-+ echo "$X_PKG_ERRORS" >&5
-
-+ { { echo "$as_me:$LINENO: error: Package requirements (x11 xau) were not met:
-
--if test "x$x_includes" = "x"; then
-- x_includes="/usr/include"
-+$X_PKG_ERRORS
-+
-+Consider adjusting the PKG_CONFIG_PATH environment variable if you
-+installed software in a non-standard prefix.
-+
-+Alternatively, you may set the environment variables X_CFLAGS
-+and X_LIBS to avoid the need to call pkg-config.
-+See the pkg-config man page for more details.
-+" >&5
-+echo "$as_me: error: Package requirements (x11 xau) were not met:
-+
-+$X_PKG_ERRORS
-+
-+Consider adjusting the PKG_CONFIG_PATH environment variable if you
-+installed software in a non-standard prefix.
-+
-+Alternatively, you may set the environment variables X_CFLAGS
-+and X_LIBS to avoid the need to call pkg-config.
-+See the pkg-config man page for more details.
-+" >&2;}
-+ { (exit 1); exit 1; }; }
-+elif test $pkg_failed = untried; then
-+ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it
-+is in your PATH or set the PKG_CONFIG environment variable to the full
-+path to pkg-config.
-+
-+Alternatively, you may set the environment variables X_CFLAGS
-+and X_LIBS to avoid the need to call pkg-config.
-+See the pkg-config man page for more details.
-+
-+To get pkg-config, see <http://www.freedesktop.org/software/pkgconfig>.
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it
-+is in your PATH or set the PKG_CONFIG environment variable to the full
-+path to pkg-config.
-+
-+Alternatively, you may set the environment variables X_CFLAGS
-+and X_LIBS to avoid the need to call pkg-config.
-+See the pkg-config man page for more details.
-+
-+To get pkg-config, see <http://www.freedesktop.org/software/pkgconfig>.
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+else
-+ X_CFLAGS=$pkg_cv_X_CFLAGS
-+ X_LIBS=$pkg_cv_X_LIBS
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
-+ :
- fi
-
- saved_cflags="$CFLAGS"
-@@ -5380,136 +24550,226 @@
- CFLAGS="$CFLAGS $X_CFLAGS"
- LDFLAGS="$LDFLAGS $X_LDFLAGS $X_LIBS"
-
--if test "x$no_x" = "xyes"; then
-- { echo "configure: error:
--*** X libraries or include files not found. Check 'config.log' for
--*** more details." 1>&2; exit 1; }
-+if test "x$no_x" = "xyes"; then
-+ { { echo "$as_me:$LINENO: error:
-+*** X libraries or include files not found. Check 'config.log' for
-+*** more details." >&5
-+echo "$as_me: error:
-+*** X libraries or include files not found. Check 'config.log' for
-+*** more details." >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
- # Checks for libraries.
- # Check for the X11 library
--echo $ac_n "checking for XOpenDisplay in -lX11""... $ac_c" 1>&6
--echo "configure:5393: checking for XOpenDisplay in -lX11" >&5
--ac_lib_var=`echo X11'_'XOpenDisplay | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for XOpenDisplay in -lX11" >&5
-+echo $ECHO_N "checking for XOpenDisplay in -lX11... $ECHO_C" >&6
-+if test "${ac_cv_lib_X11_XOpenDisplay+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-lX11 $X_EXTRA_LIBS $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 5401 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char XOpenDisplay();
--
--int main() {
--XOpenDisplay()
--; return 0; }
--EOF
--if { (eval echo configure:5412: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
--
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+ builtin and then its argument prototype would still apply. */
-+char XOpenDisplay ();
-+int
-+main ()
-+{
-+XOpenDisplay ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_X11_XOpenDisplay=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_X11_XOpenDisplay=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_X11_XOpenDisplay" >&5
-+echo "${ECHO_T}$ac_cv_lib_X11_XOpenDisplay" >&6
-+if test $ac_cv_lib_X11_XOpenDisplay = yes; then
- x_libs="-lX11 $X_EXTRA_LIBS"
- else
-- echo "$ac_t""no" 1>&6
--{ echo "configure: error: *** libX11 not found. Check 'config.log' for more details." 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: *** libX11 not found. Check 'config.log' for more details." >&5
-+echo "$as_me: error: *** libX11 not found. Check 'config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
-
- if test "x$enable_shm" = "xyes"; then
- # Check for the Xext library (needed for XShm extention)
-- echo $ac_n "checking for XShmAttach in -lXext""... $ac_c" 1>&6
--echo "configure:5437: checking for XShmAttach in -lXext" >&5
--ac_lib_var=`echo Xext'_'XShmAttach | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ echo "$as_me:$LINENO: checking for XShmAttach in -lXext" >&5
-+echo $ECHO_N "checking for XShmAttach in -lXext... $ECHO_C" >&6
-+if test "${ac_cv_lib_Xext_XShmAttach+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-lXext $x_libs $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 5445 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char XShmAttach();
--
--int main() {
--XShmAttach()
--; return 0; }
--EOF
--if { (eval echo configure:5456: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
--
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+ builtin and then its argument prototype would still apply. */
-+char XShmAttach ();
-+int
-+main ()
-+{
-+XShmAttach ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_Xext_XShmAttach=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_Xext_XShmAttach=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_Xext_XShmAttach" >&5
-+echo "${ECHO_T}$ac_cv_lib_Xext_XShmAttach" >&6
-+if test $ac_cv_lib_Xext_XShmAttach = yes; then
- x_libs="-lXext $x_libs"
- else
-- echo "$ac_t""no" 1>&6
--# On AIX, it is in XextSam instead, but we still need -lXext
-- echo $ac_n "checking for XShmAttach in -lXextSam""... $ac_c" 1>&6
--echo "configure:5476: checking for XShmAttach in -lXextSam" >&5
--ac_lib_var=`echo XextSam'_'XShmAttach | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ # On AIX, it is in XextSam instead, but we still need -lXext
-+ echo "$as_me:$LINENO: checking for XShmAttach in -lXextSam" >&5
-+echo $ECHO_N "checking for XShmAttach in -lXextSam... $ECHO_C" >&6
-+if test "${ac_cv_lib_XextSam_XShmAttach+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-lXextSam $x_libs $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 5484 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char XShmAttach();
--
--int main() {
--XShmAttach()
--; return 0; }
--EOF
--if { (eval echo configure:5495: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
--
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+ builtin and then its argument prototype would still apply. */
-+char XShmAttach ();
-+int
-+main ()
-+{
-+XShmAttach ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_XextSam_XShmAttach=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_XextSam_XShmAttach=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_XextSam_XShmAttach" >&5
-+echo "${ECHO_T}$ac_cv_lib_XextSam_XShmAttach" >&6
-+if test $ac_cv_lib_XextSam_XShmAttach = yes; then
- x_libs="-lXextSam -lXext $x_libs"
- else
-- echo "$ac_t""no" 1>&6
--no_xext_lib=yes
-+ no_xext_lib=yes
- fi
-
- fi
-@@ -5518,140 +24778,222 @@
-
- # Check for shaped window extension
-
--echo $ac_n "checking for XShapeCombineMask in -lXext""... $ac_c" 1>&6
--echo "configure:5523: checking for XShapeCombineMask in -lXext" >&5
--ac_lib_var=`echo Xext'_'XShapeCombineMask | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for XShapeCombineMask in -lXext" >&5
-+echo $ECHO_N "checking for XShapeCombineMask in -lXext... $ECHO_C" >&6
-+if test "${ac_cv_lib_Xext_XShapeCombineMask+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-lXext $x_libs $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 5531 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char XShapeCombineMask();
--
--int main() {
--XShapeCombineMask()
--; return 0; }
--EOF
--if { (eval echo configure:5542: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
--
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+ builtin and then its argument prototype would still apply. */
-+char XShapeCombineMask ();
-+int
-+main ()
-+{
-+XShapeCombineMask ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_Xext_XShapeCombineMask=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_Xext_XShapeCombineMask=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_Xext_XShapeCombineMask" >&5
-+echo "${ECHO_T}$ac_cv_lib_Xext_XShapeCombineMask" >&6
-+if test $ac_cv_lib_Xext_XShapeCombineMask = yes; then
- if test -z "`echo $x_libs | grep "\-lXext" 2> /dev/null`"; then
- x_libs="-lXext $x_libs"
- fi
-- cat >> confdefs.h <<\EOF
-+ cat >>confdefs.h <<\_ACEOF
- #define HAVE_SHAPE_EXT 1
--EOF
-+_ACEOF
-
--else
-- echo "$ac_t""no" 1>&6
- fi
-
-
- # Check for XConvertCase (X11R6 specific)
-
--echo $ac_n "checking for XConvertCase in -lX11""... $ac_c" 1>&6
--echo "configure:5572: checking for XConvertCase in -lX11" >&5
--ac_lib_var=`echo X11'_'XConvertCase | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- ac_save_LIBS="$LIBS"
--LIBS="-lX11 $x_libs $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 5580 "configure"
--#include "confdefs.h"
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char XConvertCase();
--
--int main() {
--XConvertCase()
--; return 0; }
--EOF
--if { (eval echo configure:5591: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
-+echo "$as_me:$LINENO: checking for XConvertCase in -lX11" >&5
-+echo $ECHO_N "checking for XConvertCase in -lX11... $ECHO_C" >&6
-+if test "${ac_cv_lib_X11_XConvertCase+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-lX11 $x_libs $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- cat >> confdefs.h <<\EOF
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char XConvertCase ();
-+int
-+main ()
-+{
-+XConvertCase ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_X11_XConvertCase=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_X11_XConvertCase=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_X11_XConvertCase" >&5
-+echo "${ECHO_T}$ac_cv_lib_X11_XConvertCase" >&6
-+if test $ac_cv_lib_X11_XConvertCase = yes; then
-+ cat >>confdefs.h <<\_ACEOF
- #define HAVE_XCONVERTCASE 1
--EOF
-+_ACEOF
-
--else
-- echo "$ac_t""no" 1>&6
- fi
-
-
- # Check for XIM support.
-
--echo $ac_n "checking for XUnregisterIMInstantiateCallback in -lX11""... $ac_c" 1>&6
--echo "configure:5618: checking for XUnregisterIMInstantiateCallback in -lX11" >&5
--ac_lib_var=`echo X11'_'XUnregisterIMInstantiateCallback | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for XUnregisterIMInstantiateCallback in -lX11" >&5
-+echo $ECHO_N "checking for XUnregisterIMInstantiateCallback in -lX11... $ECHO_C" >&6
-+if test "${ac_cv_lib_X11_XUnregisterIMInstantiateCallback+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
-+ ac_check_lib_save_LIBS=$LIBS
- LIBS="-lX11 $x_libs $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 5626 "configure"
--#include "confdefs.h"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char XUnregisterIMInstantiateCallback();
--
--int main() {
--XUnregisterIMInstantiateCallback()
--; return 0; }
--EOF
--if { (eval echo configure:5637: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
--fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
--
--fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- :
-+ builtin and then its argument prototype would still apply. */
-+char XUnregisterIMInstantiateCallback ();
-+int
-+main ()
-+{
-+XUnregisterIMInstantiateCallback ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_X11_XUnregisterIMInstantiateCallback=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_X11_XUnregisterIMInstantiateCallback=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_X11_XUnregisterIMInstantiateCallback" >&5
-+echo "${ECHO_T}$ac_cv_lib_X11_XUnregisterIMInstantiateCallback" >&6
-+if test $ac_cv_lib_X11_XUnregisterIMInstantiateCallback = yes; then
-+ :
- else
-- echo "$ac_t""no" 1>&6
--enable_xim_inst="no"
-+ enable_xim_inst="no"
- fi
-
-
-@@ -5673,9 +25015,9 @@
- if test "x$enable_xim" = "xyes"; then
- GTK_XIM_FLAGS="-DUSE_XIM"
- if test "x$enable_xim_inst" = "xyes"; then
-- cat >> confdefs.h <<\EOF
-+ cat >>confdefs.h <<\_ACEOF
- #define USE_X11R6_XIM 1
--EOF
-+_ACEOF
-
- fi
- fi
-@@ -5686,25 +25028,28 @@
- # set up things for XInput
-
- if test "x$with_xinput" = "xgxi"; then
-- echo "configure: warning:
-+ { echo "$as_me:$LINENO: WARNING:
-+*** The generic XInput support has not been tested for several years
-+*** and is not known to work with any currently available X servers" >&5
-+echo "$as_me: WARNING:
- *** The generic XInput support has not been tested for several years
--*** and is not known to work with any currently available X servers" 1>&2
-- cat >> confdefs.h <<\EOF
-+*** and is not known to work with any currently available X servers" >&2;}
-+ cat >>confdefs.h <<\_ACEOF
- #define XINPUT_GXI 1
--EOF
-+_ACEOF
-
- xinput_progs=gxid
- x_libs="-lXi $x_libs"
- elif test "x$with_xinput" = "xxfree" || test "x$with_xinput" = "xyes"; then
-- cat >> confdefs.h <<\EOF
-+ cat >>confdefs.h <<\_ACEOF
- #define XINPUT_XFREE 1
--EOF
-+_ACEOF
-
- x_libs="-lXi $x_libs"
- else
-- cat >> confdefs.h <<\EOF
-+ cat >>confdefs.h <<\_ACEOF
- #define XINPUT_NONE 1
--EOF
-+_ACEOF
-
- fi
-
-@@ -5719,96 +25064,317 @@
-
- if test "x$enable_shm" = "xyes"; then
- # Check for shared memory
-- ac_safe=`echo "sys/ipc.h" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for sys/ipc.h""... $ac_c" 1>&6
--echo "configure:5725: checking for sys/ipc.h" >&5
--if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 5730 "configure"
--#include "confdefs.h"
-+ if test "${ac_cv_header_sys_ipc_h+set}" = set; then
-+ echo "$as_me:$LINENO: checking for sys/ipc.h" >&5
-+echo $ECHO_N "checking for sys/ipc.h... $ECHO_C" >&6
-+if test "${ac_cv_header_sys_ipc_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_sys_ipc_h" >&5
-+echo "${ECHO_T}$ac_cv_header_sys_ipc_h" >&6
-+else
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking sys/ipc.h usability" >&5
-+echo $ECHO_N "checking sys/ipc.h usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
- #include <sys/ipc.h>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:5735: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=yes"
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking sys/ipc.h presence" >&5
-+echo $ECHO_N "checking sys/ipc.h presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <sys/ipc.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=no"
-+ ac_cpp_err=yes
- fi
--rm -f conftest*
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+ yes:no: )
-+ { echo "$as_me:$LINENO: WARNING: sys/ipc.h: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: sys/ipc.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/ipc.h: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: sys/ipc.h: proceeding with the compiler's result" >&2;}
-+ ac_header_preproc=yes
-+ ;;
-+ no:yes:* )
-+ { echo "$as_me:$LINENO: WARNING: sys/ipc.h: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: sys/ipc.h: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/ipc.h: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: sys/ipc.h: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/ipc.h: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: sys/ipc.h: see the Autoconf documentation" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/ipc.h: section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: sys/ipc.h: section \"Present But Cannot Be Compiled\"" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/ipc.h: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: sys/ipc.h: proceeding with the preprocessor's result" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/ipc.h: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: sys/ipc.h: in the future, the compiler will take precedence" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------------ ##
-+## Report this to the AC_PACKAGE_NAME lists. ##
-+## ------------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for sys/ipc.h" >&5
-+echo $ECHO_N "checking for sys/ipc.h... $ECHO_C" >&6
-+if test "${ac_cv_header_sys_ipc_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_header_sys_ipc_h=$ac_header_preproc
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_sys_ipc_h" >&5
-+echo "${ECHO_T}$ac_cv_header_sys_ipc_h" >&6
-+
- fi
--if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- cat >> confdefs.h <<\EOF
-+if test $ac_cv_header_sys_ipc_h = yes; then
-+ cat >>confdefs.h <<\_ACEOF
- #define HAVE_IPC_H 1
--EOF
-+_ACEOF
-
- else
-- echo "$ac_t""no" 1>&6
--no_sys_ipc=yes
-+ no_sys_ipc=yes
- fi
-
-- ac_safe=`echo "sys/shm.h" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for sys/shm.h""... $ac_c" 1>&6
--echo "configure:5762: checking for sys/shm.h" >&5
--if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+
-+ if test "${ac_cv_header_sys_shm_h+set}" = set; then
-+ echo "$as_me:$LINENO: checking for sys/shm.h" >&5
-+echo $ECHO_N "checking for sys/shm.h... $ECHO_C" >&6
-+if test "${ac_cv_header_sys_shm_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_sys_shm_h" >&5
-+echo "${ECHO_T}$ac_cv_header_sys_shm_h" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 5767 "configure"
--#include "confdefs.h"
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking sys/shm.h usability" >&5
-+echo $ECHO_N "checking sys/shm.h usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
- #include <sys/shm.h>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:5772: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=yes"
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking sys/shm.h presence" >&5
-+echo $ECHO_N "checking sys/shm.h presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <sys/shm.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=no"
-+ ac_cpp_err=yes
- fi
--rm -f conftest*
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+ yes:no: )
-+ { echo "$as_me:$LINENO: WARNING: sys/shm.h: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: sys/shm.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/shm.h: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: sys/shm.h: proceeding with the compiler's result" >&2;}
-+ ac_header_preproc=yes
-+ ;;
-+ no:yes:* )
-+ { echo "$as_me:$LINENO: WARNING: sys/shm.h: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: sys/shm.h: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/shm.h: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: sys/shm.h: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/shm.h: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: sys/shm.h: see the Autoconf documentation" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/shm.h: section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: sys/shm.h: section \"Present But Cannot Be Compiled\"" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/shm.h: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: sys/shm.h: proceeding with the preprocessor's result" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: sys/shm.h: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: sys/shm.h: in the future, the compiler will take precedence" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------------ ##
-+## Report this to the AC_PACKAGE_NAME lists. ##
-+## ------------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for sys/shm.h" >&5
-+echo $ECHO_N "checking for sys/shm.h... $ECHO_C" >&6
-+if test "${ac_cv_header_sys_shm_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_header_sys_shm_h=$ac_header_preproc
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_sys_shm_h" >&5
-+echo "${ECHO_T}$ac_cv_header_sys_shm_h" >&6
-+
- fi
--if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- cat >> confdefs.h <<\EOF
-+if test $ac_cv_header_sys_shm_h = yes; then
-+ cat >>confdefs.h <<\_ACEOF
- #define HAVE_SHM_H 1
--EOF
-+_ACEOF
-
- else
-- echo "$ac_t""no" 1>&6
--no_sys_shm=yes
-+ no_sys_shm=yes
- fi
-
-
-+
- # Check for the X shared memory extension header file
-- echo $ac_n "checking X11/extensions/XShm.h""... $ac_c" 1>&6
--echo "configure:5800: checking X11/extensions/XShm.h" >&5
-+ echo "$as_me:$LINENO: checking X11/extensions/XShm.h" >&5
-+echo $ECHO_N "checking X11/extensions/XShm.h... $ECHO_C" >&6
- if test "x$no_xext_lib" = "xyes"; then
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- no_xshm=yes
- else
- if test -f "$x_includes/X11/extensions/XShm.h"; then
-- echo "$ac_t""yes" 1>&6
-- cat >> confdefs.h <<\EOF
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
-+ cat >>confdefs.h <<\_ACEOF
- #define HAVE_XSHM_H 1
--EOF
-+_ACEOF
-
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- no_xshm=yes
- fi
- fi
-@@ -5816,15 +25382,18 @@
-
- # Check if X_LOCALE definition is necessary
-
--echo $ac_n "checking need -DX_LOCALE""... $ac_c" 1>&6
--echo "configure:5821: checking need -DX_LOCALE" >&5
-+echo "$as_me:$LINENO: checking need -DX_LOCALE" >&5
-+echo $ECHO_N "checking need -DX_LOCALE... $ECHO_C" >&6
-
- if test "$cross_compiling" = yes; then
- need_x_locale=no
- else
-- cat > conftest.$ac_ext <<EOF
--#line 5827 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
- #include <stdio.h>
- #include <locale.h>
-@@ -5834,65 +25403,107 @@
- {
- return setlocale (LC_ALL, "${with_locale}") == NULL;
- }
--EOF
--if { (eval echo configure:5839: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
--then
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- need_x_locale=no
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -fr conftest*
-- need_x_locale=yes
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+need_x_locale=yes
- fi
--rm -fr conftest*
-+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
- fi
--
--echo "$ac_t""$need_x_locale" 1>&6
-+echo "$as_me:$LINENO: result: $need_x_locale" >&5
-+echo "${ECHO_T}$need_x_locale" >&6
-
- use_native_locale=no
- if test $need_x_locale = yes; then
- GTK_LOCALE_FLAGS="-DX_LOCALE"
- else
- if test x$with_native_locale = xyes ; then
-- echo $ac_n "checking functioning locale support""... $ac_c" 1>&6
--echo "configure:5859: checking functioning locale support" >&5
--
-- cat > conftest.$ac_ext <<EOF
--#line 5862 "configure"
--#include "confdefs.h"
-+ echo "$as_me:$LINENO: checking functioning locale support" >&5
-+echo $ECHO_N "checking functioning locale support... $ECHO_C" >&6
-+
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <stdlib.h>
--int main() {
-+int
-+main ()
-+{
-
- char c;
- if (MB_CUR_MAX == 1) {
- wctomb(&c, 42);
- }
--
--; return 0; }
--EOF
--if { (eval echo configure:5874: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- use_native_locale=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-
-- echo "$ac_t""$use_native_locale" 1>&6
-+ echo "$as_me:$LINENO: result: $use_native_locale" >&5
-+echo "${ECHO_T}$use_native_locale" >&6
- fi
- fi
-
- if test x$use_native_locale = xyes ; then
-- echo $ac_n "checking if sizeof(wchar_t) == 4""... $ac_c" 1>&6
--echo "configure:5889: checking if sizeof(wchar_t) == 4" >&5
-+ echo "$as_me:$LINENO: checking if sizeof(wchar_t) == 4" >&5
-+echo $ECHO_N "checking if sizeof(wchar_t) == 4... $ECHO_C" >&6
-
- if test "$cross_compiling" = yes; then
- :
- else
-- cat > conftest.$ac_ext <<EOF
--#line 5895 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
- #include <stdlib.h>
-
-@@ -5901,70 +25512,110 @@
- {
- return (sizeof(wchar_t) == 4) ? 0 : 1;
- }
--EOF
--if { (eval echo configure:5906: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
--then
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- :
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -fr conftest*
-- use_native_locale=no
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+use_native_locale=no
- fi
--rm -fr conftest*
-+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
- fi
--
-- echo "$ac_t""$use_native_locale" 1>&6
-+ echo "$as_me:$LINENO: result: $use_native_locale" >&5
-+echo "${ECHO_T}$use_native_locale" >&6
- fi
-
--if test $use_native_locale = yes ; then
-- cat >> confdefs.h <<\EOF
-+if test $use_native_locale = yes ; then
-+ cat >>confdefs.h <<\_ACEOF
- #define USE_NATIVE_LOCALE 1
--EOF
-+_ACEOF
-
- fi
-
- # Checks for header files.
--echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
--echo "configure:5930: checking for ANSI C header files" >&5
--if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 5935 "configure"
--#include "confdefs.h"
-+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-+if test "${ac_cv_header_stdc+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <stdlib.h>
- #include <stdarg.h>
- #include <string.h>
- #include <float.h>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:5943: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_cv_header_stdc=yes
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_cv_header_stdc=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_header_stdc=no
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-
- if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
--cat > conftest.$ac_ext <<EOF
--#line 5960 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <string.h>
--EOF
-+
-+_ACEOF
- if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "memchr" >/dev/null 2>&1; then
-+ $EGREP "memchr" >/dev/null 2>&1; then
- :
- else
-- rm -rf conftest*
- ac_cv_header_stdc=no
- fi
- rm -f conftest*
-@@ -5973,16 +25624,19 @@
-
- if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
--cat > conftest.$ac_ext <<EOF
--#line 5978 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <stdlib.h>
--EOF
-+
-+_ACEOF
- if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "free" >/dev/null 2>&1; then
-+ $EGREP "free" >/dev/null 2>&1; then
- :
- else
-- rm -rf conftest*
- ac_cv_header_stdc=no
- fi
- rm -f conftest*
-@@ -5991,135 +25645,198 @@
-
- if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
--if test "$cross_compiling" = yes; then
-+ if test "$cross_compiling" = yes; then
- :
- else
-- cat > conftest.$ac_ext <<EOF
--#line 5999 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <ctype.h>
--#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
--#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
--#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
--int main () { int i; for (i = 0; i < 256; i++)
--if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
--exit (0); }
-+#if ((' ' & 0x0FF) == 0x020)
-+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-+#else
-+# define ISLOWER(c) \
-+ (('a' <= (c) && (c) <= 'i') \
-+ || ('j' <= (c) && (c) <= 'r') \
-+ || ('s' <= (c) && (c) <= 'z'))
-+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-+#endif
-
--EOF
--if { (eval echo configure:6010: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
--then
-+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-+int
-+main ()
-+{
-+ int i;
-+ for (i = 0; i < 256; i++)
-+ if (XOR (islower (i), ISLOWER (i))
-+ || toupper (i) != TOUPPER (i))
-+ exit(2);
-+ exit (0);
-+}
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- :
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -fr conftest*
-- ac_cv_header_stdc=no
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+ac_cv_header_stdc=no
- fi
--rm -fr conftest*
-+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
- fi
--
- fi
- fi
--
--echo "$ac_t""$ac_cv_header_stdc" 1>&6
-+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-+echo "${ECHO_T}$ac_cv_header_stdc" >&6
- if test $ac_cv_header_stdc = yes; then
-- cat >> confdefs.h <<\EOF
-+
-+cat >>confdefs.h <<\_ACEOF
- #define STDC_HEADERS 1
--EOF
-+_ACEOF
-
- fi
-
-
- # Checks for typedefs, structures, and compiler characteristics.
--echo $ac_n "checking for working const""... $ac_c" 1>&6
--echo "configure:6036: checking for working const" >&5
--if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 6041 "configure"
--#include "confdefs.h"
-+echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
-+echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6
-+if test "${ac_cv_c_const+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--int main() {
-+int
-+main ()
-+{
-+/* FIXME: Include the comments suggested by Paul. */
-+#ifndef __cplusplus
-+ /* Ultrix mips cc rejects this. */
-+ typedef int charset[2];
-+ const charset x;
-+ /* SunOS 4.1.1 cc rejects this. */
-+ char const *const *ccp;
-+ char **p;
-+ /* NEC SVR4.0.2 mips cc rejects this. */
-+ struct point {int x, y;};
-+ static struct point const zero = {0,0};
-+ /* AIX XL C 1.02.0.0 rejects this.
-+ It does not let you subtract one const X* pointer from another in
-+ an arm of an if-expression whose if-part is not a constant
-+ expression */
-+ const char *g = "string";
-+ ccp = &g + (g ? g-g : 0);
-+ /* HPUX 7.0 cc rejects these. */
-+ ++ccp;
-+ p = (char**) ccp;
-+ ccp = (char const *const *) p;
-+ { /* SCO 3.2v4 cc rejects this. */
-+ char *t;
-+ char const *s = 0 ? (char *) 0 : (char const *) 0;
-
--/* Ultrix mips cc rejects this. */
--typedef int charset[2]; const charset x;
--/* SunOS 4.1.1 cc rejects this. */
--char const *const *ccp;
--char **p;
--/* NEC SVR4.0.2 mips cc rejects this. */
--struct point {int x, y;};
--static struct point const zero = {0,0};
--/* AIX XL C 1.02.0.0 rejects this.
-- It does not let you subtract one const X* pointer from another in an arm
-- of an if-expression whose if-part is not a constant expression */
--const char *g = "string";
--ccp = &g + (g ? g-g : 0);
--/* HPUX 7.0 cc rejects these. */
--++ccp;
--p = (char**) ccp;
--ccp = (char const *const *) p;
--{ /* SCO 3.2v4 cc rejects this. */
-- char *t;
-- char const *s = 0 ? (char *) 0 : (char const *) 0;
--
-- *t++ = 0;
--}
--{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
-- int x[] = {25, 17};
-- const int *foo = &x[0];
-- ++foo;
--}
--{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
-- typedef const int *iptr;
-- iptr p = 0;
-- ++p;
--}
--{ /* AIX XL C 1.02.0.0 rejects this saying
-- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
-- struct s { int j; const int *ap[3]; };
-- struct s *b; b->j = 5;
--}
--{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
-- const int foo = 10;
--}
-+ *t++ = 0;
-+ }
-+ { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
-+ int x[] = {25, 17};
-+ const int *foo = &x[0];
-+ ++foo;
-+ }
-+ { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
-+ typedef const int *iptr;
-+ iptr p = 0;
-+ ++p;
-+ }
-+ { /* AIX XL C 1.02.0.0 rejects this saying
-+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
-+ struct s { int j; const int *ap[3]; };
-+ struct s *b; b->j = 5;
-+ }
-+ { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
-+ const int foo = 10;
-+ }
-+#endif
-
--; return 0; }
--EOF
--if { (eval echo configure:6090: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_cv_c_const=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_cv_c_const=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_c_const=no
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
--
--echo "$ac_t""$ac_cv_c_const" 1>&6
-+echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
-+echo "${ECHO_T}$ac_cv_c_const" >&6
- if test $ac_cv_c_const = no; then
-- cat >> confdefs.h <<\EOF
--#define const
--EOF
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define const
-+_ACEOF
-
- fi
-
-
- # Checks for library functions.
--echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
--echo "configure:6113: checking return type of signal handlers" >&5
--if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 6118 "configure"
--#include "confdefs.h"
-+echo "$as_me:$LINENO: checking return type of signal handlers" >&5
-+echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6
-+if test "${ac_cv_type_signal+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <sys/types.h>
- #include <signal.h>
- #ifdef signal
--#undef signal
-+# undef signal
- #endif
- #ifdef __cplusplus
- extern "C" void (*signal (int, void (*)(int)))(int);
-@@ -6127,134 +25844,320 @@
- void (*signal ()) ();
- #endif
-
--int main() {
-+int
-+main ()
-+{
- int i;
--; return 0; }
--EOF
--if { (eval echo configure:6135: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_cv_type_signal=void
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_cv_type_signal=int
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_type_signal=int
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
-+echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5
-+echo "${ECHO_T}$ac_cv_type_signal" >&6
-
--echo "$ac_t""$ac_cv_type_signal" 1>&6
--cat >> confdefs.h <<EOF
-+cat >>confdefs.h <<_ACEOF
- #define RETSIGTYPE $ac_cv_type_signal
--EOF
-+_ACEOF
-+
-
-
--for ac_hdr in unistd.h
-+
-+for ac_header in stdlib.h unistd.h
- do
--ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
--echo "configure:6157: checking for $ac_hdr" >&5
--if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+else
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
- else
-- cat > conftest.$ac_ext <<EOF
--#line 6162 "configure"
--#include "confdefs.h"
--#include <$ac_hdr>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:6167: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=yes"
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=no"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-+ yes:no: )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-+ ac_header_preproc=yes
-+ ;;
-+ no:yes:* )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------------ ##
-+## Report this to the AC_PACKAGE_NAME lists. ##
-+## ------------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ eval "$as_ac_Header=\$ac_header_preproc"
- fi
--rm -f conftest*
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+
- fi
--if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_hdr 1
--EOF
--
--else
-- echo "$ac_t""no" 1>&6
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
- fi
-+
- done
-
-+
- for ac_func in getpagesize
- do
--echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
--echo "configure:6196: checking for $ac_func" >&5
--if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 6201 "configure"
--#include "confdefs.h"
-+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define $ac_func innocuous_$ac_func
-+
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char $ac_func(); below. */
--#include <assert.h>
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char $ac_func();
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-
--int main() {
-+#undef $ac_func
-
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
- choke me
- #else
--$ac_func();
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:6224: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_$ac_func=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_$ac_func=no"
--fi
--rm -f conftest*
--fi
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_var=no"
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+_ACEOF
-
--if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_func 1
--EOF
--
--else
-- echo "$ac_t""no" 1>&6
- fi
- done
-
--echo $ac_n "checking for working mmap""... $ac_c" 1>&6
--echo "configure:6249: checking for working mmap" >&5
--if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for working mmap" >&5
-+echo $ECHO_N "checking for working mmap... $ECHO_C" >&6
-+if test "${ac_cv_func_mmap_fixed_mapped+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test "$cross_compiling" = yes; then
- ac_cv_func_mmap_fixed_mapped=no
- else
-- cat > conftest.$ac_ext <<EOF
--#line 6257 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+/* malloc might have been renamed as rpl_malloc. */
-+#undef malloc
-
- /* Thanks to Mike Haertel and Jim Avera for this test.
- Here is a matrix of mmap possibilities:
-@@ -6268,34 +26171,34 @@
- back from the file, nor mmap's back from the file@a different
- address. (There have been systems where private was not correctly
- implemented like the infamous i386 svr4.0, and systems where the
-- VM page cache was not coherent with the filesystem buffer cache
-+ VM page cache was not coherent with the file system buffer cache
- like early versions of FreeBSD and possibly contemporary NetBSD.)
- For shared mappings, we should conversely verify that changes get
-- propogated back to all the places they're supposed to be.
-+ propagated back to all the places they're supposed to be.
-
- Grep wants private fixed already mapped.
- The main things grep needs to know about mmap are:
- * does it exist and is it safe to write into the mmap'd area
- * how to use it (BSD variants) */
--#include <sys/types.h>
-+
- #include <fcntl.h>
- #include <sys/mman.h>
-
--/* This mess was copied from the GNU getpagesize.h. */
--#ifndef HAVE_GETPAGESIZE
--# ifdef HAVE_UNISTD_H
--# include <unistd.h>
--# endif
-+#if !STDC_HEADERS && !HAVE_STDLIB_H
-+char *malloc ();
-+#endif
-
-+/* This mess was copied from the GNU getpagesize.h. */
-+#if !HAVE_GETPAGESIZE
- /* Assume that all systems that can run configure have sys/param.h. */
--# ifndef HAVE_SYS_PARAM_H
-+# if !HAVE_SYS_PARAM_H
- # define HAVE_SYS_PARAM_H 1
- # endif
-
- # ifdef _SC_PAGESIZE
- # define getpagesize() sysconf(_SC_PAGESIZE)
- # else /* no _SC_PAGESIZE */
--# ifdef HAVE_SYS_PARAM_H
-+# if HAVE_SYS_PARAM_H
- # include <sys/param.h>
- # ifdef EXEC_PAGESIZE
- # define getpagesize() EXEC_PAGESIZE
-@@ -6318,962 +26221,2169 @@
- # else /* no HAVE_SYS_PARAM_H */
- # define getpagesize() 8192 /* punt totally */
- # endif /* no HAVE_SYS_PARAM_H */
--# endif /* no _SC_PAGESIZE */
--
--#endif /* no HAVE_GETPAGESIZE */
--
--#ifdef __cplusplus
--extern "C" { void *malloc(unsigned); }
--#else
--char *malloc();
--#endif
-+# endif /* no _SC_PAGESIZE */
-+
-+#endif /* no HAVE_GETPAGESIZE */
-
- int
--main()
-+main ()
- {
-- char *data, *data2, *data3;
-- int i, pagesize;
-- int fd;
--
-- pagesize = getpagesize();
--
-- /*
-- * First, make a file with some known garbage in it.
-- */
-- data = malloc(pagesize);
-- if (!data)
-- exit(1);
-- for (i = 0; i < pagesize; ++i)
-- *(data + i) = rand();
-- umask(0);
-- fd = creat("conftestmmap", 0600);
-- if (fd < 0)
-- exit(1);
-- if (write(fd, data, pagesize) != pagesize)
-- exit(1);
-- close(fd);
--
-- /*
-- * Next, try to mmap the file at a fixed address which
-- * already has something else allocated at it. If we can,
-- * also make sure that we see the same garbage.
-- */
-- fd = open("conftestmmap", O_RDWR);
-- if (fd < 0)
-- exit(1);
-- data2 = malloc(2 * pagesize);
-- if (!data2)
-- exit(1);
-- data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1);
-- if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE,
-- MAP_PRIVATE | MAP_FIXED, fd, 0L))
-- exit(1);
-- for (i = 0; i < pagesize; ++i)
-- if (*(data + i) != *(data2 + i))
-- exit(1);
--
-- /*
-- * Finally, make sure that changes to the mapped area
-- * do not percolate back to the file as seen by read().
-- * (This is a bug on some variants of i386 svr4.0.)
-- */
-- for (i = 0; i < pagesize; ++i)
-- *(data2 + i) = *(data2 + i) + 1;
-- data3 = malloc(pagesize);
-- if (!data3)
-- exit(1);
-- if (read(fd, data3, pagesize) != pagesize)
-- exit(1);
-- for (i = 0; i < pagesize; ++i)
-- if (*(data + i) != *(data3 + i))
-- exit(1);
-- close(fd);
-- unlink("conftestmmap");
-- exit(0);
-+ char *data, *data2, *data3;
-+ int i, pagesize;
-+ int fd;
-+
-+ pagesize = getpagesize ();
-+
-+ /* First, make a file with some known garbage in it. */
-+ data = (char *) malloc (pagesize);
-+ if (!data)
-+ exit (1);
-+ for (i = 0; i < pagesize; ++i)
-+ *(data + i) = rand ();
-+ umask (0);
-+ fd = creat ("conftest.mmap", 0600);
-+ if (fd < 0)
-+ exit (1);
-+ if (write (fd, data, pagesize) != pagesize)
-+ exit (1);
-+ close (fd);
-+
-+ /* Next, try to mmap the file at a fixed address which already has
-+ something else allocated@it. If we can, also make sure that
-+ we see the same garbage. */
-+ fd = open ("conftest.mmap", O_RDWR);
-+ if (fd < 0)
-+ exit (1);
-+ data2 = (char *) malloc (2 * pagesize);
-+ if (!data2)
-+ exit (1);
-+ data2 += (pagesize - ((long) data2 & (pagesize - 1))) & (pagesize - 1);
-+ if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE,
-+ MAP_PRIVATE | MAP_FIXED, fd, 0L))
-+ exit (1);
-+ for (i = 0; i < pagesize; ++i)
-+ if (*(data + i) != *(data2 + i))
-+ exit (1);
-+
-+ /* Finally, make sure that changes to the mapped area do not
-+ percolate back to the file as seen by read(). (This is a bug on
-+ some variants of i386 svr4.0.) */
-+ for (i = 0; i < pagesize; ++i)
-+ *(data2 + i) = *(data2 + i) + 1;
-+ data3 = (char *) malloc (pagesize);
-+ if (!data3)
-+ exit (1);
-+ if (read (fd, data3, pagesize) != pagesize)
-+ exit (1);
-+ for (i = 0; i < pagesize; ++i)
-+ if (*(data + i) != *(data3 + i))
-+ exit (1);
-+ close (fd);
-+ exit (0);
- }
--
--EOF
--if { (eval echo configure:6397: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
--then
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_cv_func_mmap_fixed_mapped=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -fr conftest*
-- ac_cv_func_mmap_fixed_mapped=no
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+ac_cv_func_mmap_fixed_mapped=no
- fi
--rm -fr conftest*
-+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
- fi
--
- fi
--
--echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6
-+echo "$as_me:$LINENO: result: $ac_cv_func_mmap_fixed_mapped" >&5
-+echo "${ECHO_T}$ac_cv_func_mmap_fixed_mapped" >&6
- if test $ac_cv_func_mmap_fixed_mapped = yes; then
-- cat >> confdefs.h <<\EOF
-+
-+cat >>confdefs.h <<\_ACEOF
- #define HAVE_MMAP 1
--EOF
-+_ACEOF
-
- fi
-+rm -f conftest.mmap
-+
-
-
- for ac_func in getresuid
- do
--echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
--echo "configure:6423: checking for $ac_func" >&5
--if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 6428 "configure"
--#include "confdefs.h"
-+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define $ac_func innocuous_$ac_func
-+
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char $ac_func(); below. */
--#include <assert.h>
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char $ac_func();
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-
--int main() {
-+#undef $ac_func
-
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
- choke me
- #else
--$ac_func();
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:6451: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_$ac_func=yes"
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_$ac_func=no"
--fi
--rm -f conftest*
--fi
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_var=no"
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+_ACEOF
-
--if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_func 1
--EOF
--
--else
-- echo "$ac_t""no" 1>&6
- fi
- done
-
--echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
--echo "configure:6476: checking for uid_t in sys/types.h" >&5
--if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 6481 "configure"
--#include "confdefs.h"
-+echo "$as_me:$LINENO: checking for uid_t in sys/types.h" >&5
-+echo $ECHO_N "checking for uid_t in sys/types.h... $ECHO_C" >&6
-+if test "${ac_cv_type_uid_t+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <sys/types.h>
--EOF
-+
-+_ACEOF
- if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "uid_t" >/dev/null 2>&1; then
-- rm -rf conftest*
-+ $EGREP "uid_t" >/dev/null 2>&1; then
- ac_cv_type_uid_t=yes
- else
-- rm -rf conftest*
- ac_cv_type_uid_t=no
- fi
- rm -f conftest*
-
- fi
--
--echo "$ac_t""$ac_cv_type_uid_t" 1>&6
-+echo "$as_me:$LINENO: result: $ac_cv_type_uid_t" >&5
-+echo "${ECHO_T}$ac_cv_type_uid_t" >&6
- if test $ac_cv_type_uid_t = no; then
-- cat >> confdefs.h <<\EOF
-+
-+cat >>confdefs.h <<\_ACEOF
- #define uid_t int
--EOF
-+_ACEOF
-+
-
-- cat >> confdefs.h <<\EOF
-+cat >>confdefs.h <<\_ACEOF
- #define gid_t int
--EOF
-+_ACEOF
-
- fi
-
-
- # Check if <sys/select.h> needs to be included for fd_set
--echo $ac_n "checking for fd_set""... $ac_c" 1>&6
--echo "configure:6512: checking for fd_set" >&5
--cat > conftest.$ac_ext <<EOF
--#line 6514 "configure"
--#include "confdefs.h"
-+echo "$as_me:$LINENO: checking for fd_set" >&5
-+echo $ECHO_N "checking for fd_set... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <sys/types.h>
--int main() {
-+int
-+main ()
-+{
- fd_set readMask, writeMask;
--; return 0; }
--EOF
--if { (eval echo configure:6521: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- gtk_ok=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- gtk_ok=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+gtk_ok=no
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- if test $gtk_ok = yes; then
-- echo "$ac_t""yes, found in sys/types.h" 1>&6
-+ echo "$as_me:$LINENO: result: yes, found in sys/types.h" >&5
-+echo "${ECHO_T}yes, found in sys/types.h" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 6535 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <sys/select.h>
--EOF
-+
-+_ACEOF
- if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "fd_mask" >/dev/null 2>&1; then
-- rm -rf conftest*
-+ $EGREP "fd_mask" >/dev/null 2>&1; then
- gtk_ok=yes
- fi
- rm -f conftest*
-
- if test $gtk_ok = yes; then
-- cat >> confdefs.h <<\EOF
-+ cat >>confdefs.h <<\_ACEOF
- #define HAVE_SYS_SELECT_H 1
--EOF
-+_ACEOF
-
-- echo "$ac_t""yes, found in sys/select.h" 1>&6
-+ echo "$as_me:$LINENO: result: yes, found in sys/select.h" >&5
-+echo "${ECHO_T}yes, found in sys/select.h" >&6
- else
-- cat >> confdefs.h <<\EOF
-+ cat >>confdefs.h <<\_ACEOF
- #define NO_FD_SET 1
--EOF
-+_ACEOF
-
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
- fi
-
- # Duplicate `widechar' tests from `glib'.
- # Check for wchar.h
--echo $ac_n "checking for wchar.h""... $ac_c" 1>&6
--echo "configure:6564: checking for wchar.h" >&5
--cat > conftest.$ac_ext <<EOF
--#line 6566 "configure"
--#include "confdefs.h"
-+echo "$as_me:$LINENO: checking for wchar.h" >&5
-+echo $ECHO_N "checking for wchar.h... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <wchar.h>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:6571: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
- gtk_ok=yes
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- gtk_ok=no
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_ext
- if test $gtk_ok = yes; then
-- cat >> confdefs.h <<\EOF
-+
-+cat >>confdefs.h <<\_ACEOF
- #define HAVE_WCHAR_H 1
--EOF
-+_ACEOF
-
- fi
--echo "$ac_t""$gtk_ok" 1>&6
-+echo "$as_me:$LINENO: result: $gtk_ok" >&5
-+echo "${ECHO_T}$gtk_ok" >&6
-
- # Check for wctype.h (for iswalnum)
--echo $ac_n "checking for wctype.h""... $ac_c" 1>&6
--echo "configure:6594: checking for wctype.h" >&5
--cat > conftest.$ac_ext <<EOF
--#line 6596 "configure"
--#include "confdefs.h"
-+echo "$as_me:$LINENO: checking for wctype.h" >&5
-+echo $ECHO_N "checking for wctype.h... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <wctype.h>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:6601: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
- gtk_ok=yes
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- gtk_ok=no
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_ext
- if test $gtk_ok = yes; then
-- cat >> confdefs.h <<\EOF
-+
-+cat >>confdefs.h <<\_ACEOF
- #define HAVE_WCTYPE_H 1
--EOF
-+_ACEOF
-
- fi
--echo "$ac_t""$gtk_ok" 1>&6
-+echo "$as_me:$LINENO: result: $gtk_ok" >&5
-+echo "${ECHO_T}$gtk_ok" >&6
-
- # in Solaris 2.5, `iswalnum' is in -lw
- GDK_WLIBS=
--echo $ac_n "checking for iswalnum""... $ac_c" 1>&6
--echo "configure:6625: checking for iswalnum" >&5
--if eval "test \"`echo '$''{'ac_cv_func_iswalnum'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 6630 "configure"
--#include "confdefs.h"
-+echo "$as_me:$LINENO: checking for iswalnum" >&5
-+echo $ECHO_N "checking for iswalnum... $ECHO_C" >&6
-+if test "${ac_cv_func_iswalnum+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* Define iswalnum to an innocuous variant, in case <limits.h> declares iswalnum.
-+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
-+#define iswalnum innocuous_iswalnum
-+
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char iswalnum(); below. */
--#include <assert.h>
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char iswalnum();
-+ which can conflict with char iswalnum (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-
--int main() {
-+#undef iswalnum
-
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char iswalnum ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_iswalnum) || defined (__stub___iswalnum)
- choke me
- #else
--iswalnum();
-+char (*f) () = iswalnum;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:6653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_iswalnum=yes"
-+int
-+main ()
-+{
-+return f != iswalnum;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_iswalnum=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_func_iswalnum=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_iswalnum" >&5
-+echo "${ECHO_T}$ac_cv_func_iswalnum" >&6
-+if test $ac_cv_func_iswalnum = yes; then
-+ :
-+else
-+ echo "$as_me:$LINENO: checking for iswalnum in -lw" >&5
-+echo $ECHO_N "checking for iswalnum in -lw... $ECHO_C" >&6
-+if test "${ac_cv_lib_w_iswalnum+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_check_lib_save_LIBS=$LIBS
-+LIBS="-lw $LIBS"
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char iswalnum ();
-+int
-+main ()
-+{
-+iswalnum ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_w_iswalnum=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_w_iswalnum=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS=$ac_check_lib_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_w_iswalnum" >&5
-+echo "${ECHO_T}$ac_cv_lib_w_iswalnum" >&6
-+if test $ac_cv_lib_w_iswalnum = yes; then
-+ GDK_WLIBS=-lw
-+fi
-+
-+fi
-+
-+
-+# The following is necessary for Linux libc-5.4.38
-+oLIBS="$LIBS"
-+LIBS="$LIBS $GDK_WLIBS"
-+echo "$as_me:$LINENO: checking if iswalnum() and friends are properly defined" >&5
-+echo $ECHO_N "checking if iswalnum() and friends are properly defined... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdlib.h>
-+int
-+main ()
-+{
-+
-+#if (defined(HAVE_WCTYPE_H) || defined(HAVE_WCHAR_H))
-+# ifdef HAVE_WCTYPE_H
-+# include <wctype.h>
-+# else
-+# ifdef HAVE_WCHAR_H
-+# include <wchar.h>
-+# endif
-+# endif
-+#else
-+# define iswalnum(c) ((wchar_t)(c) <= 0xFF && isalnum(c))
-+#endif
-+iswalnum((wchar_t) 0);
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ gtk_ok=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+gtk_ok=no
-+fi
-+rm -f conftest.err conftest.$ac_objext \
-+ conftest$ac_exeext conftest.$ac_ext
-+LIBS="$oLIBS"
-+
-+if test $gtk_ok = no; then
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define HAVE_BROKEN_WCTYPE 1
-+_ACEOF
-+
-+ GDK_WLIBS=
-+fi
-+echo "$as_me:$LINENO: result: $gtk_ok" >&5
-+echo "${ECHO_T}$gtk_ok" >&6
-+
-+
-+
-+
-+
-+
-+ ac_config_files="$ac_config_files gtk+.spec docs/gtk-config.1 Makefile gtk-config po/Makefile.in docs/Makefile gdk/Makefile gtk/Makefile gtk/gtkfeatures.h gdk.pc gtk+.pc"
-+ ac_config_commands="$ac_config_commands default"
-+cat >confcache <<\_ACEOF
-+# This file is a shell script that caches the results of configure
-+# tests run on this system so they can be shared between configure
-+# scripts and configure runs, see configure's option --config-cache.
-+# It is not useful on other systems. If it contains results you don't
-+# want to keep, you may remove or edit it.
-+#
-+# config.status only pays attention to the cache file if you give it
-+# the --recheck option to rerun configure.
-+#
-+# `ac_cv_env_foo' variables (set or unset) will be overridden when
-+# loading this file, other *unset* `ac_cv_foo' will be assigned the
-+# following values.
-+
-+_ACEOF
-+
-+# The following way of writing the cache mishandles newlines in values,
-+# but we know of no workaround that is simple, portable, and efficient.
-+# So, don't put newlines in cache variables' values.
-+# Ultrix sh set writes to stderr and can't be redirected directly,
-+# and sets the high bit in the cache file unless we assign to the vars.
-+{
-+ (set) 2>&1 |
-+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
-+ *ac_space=\ *)
-+ # `set' does not quote correctly, so add quotes (double-quote
-+ # substitution turns \\\\ into \\, and sed turns \\ into \).
-+ sed -n \
-+ "s/'/'\\\\''/g;
-+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-+ ;;
-+ *)
-+ # `set' quotes correctly as required by POSIX, so do not add quotes.
-+ sed -n \
-+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-+ ;;
-+ esac;
-+} |
-+ sed '
-+ t clear
-+ : clear
-+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-+ t end
-+ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-+ : end' >>confcache
-+if diff $cache_file confcache >/dev/null 2>&1; then :; else
-+ if test -w $cache_file; then
-+ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
-+ cat confcache >$cache_file
-+ else
-+ echo "not updating unwritable cache $cache_file"
-+ fi
-+fi
-+rm -f confcache
-+
-+test "x$prefix" = xNONE && prefix=$ac_default_prefix
-+# Let make expand exec_prefix.
-+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-+
-+# VPATH may cause trouble with some makes, so we remove $(srcdir),
-+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-+# trailing colons and then remove the whole line if VPATH becomes empty
-+# (actually we leave an empty line to preserve line numbers).
-+if test "x$srcdir" = x.; then
-+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
-+s/:*\$(srcdir):*/:/;
-+s/:*\${srcdir}:*/:/;
-+s/:*@srcdir@:*/:/;
-+s/^\([^=]*=[ ]*\):*/\1/;
-+s/:*$//;
-+s/^[^=]*=[ ]*$//;
-+}'
-+fi
-+
-+DEFS=-DHAVE_CONFIG_H
-+
-+ac_libobjs=
-+ac_ltlibobjs=
-+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-+ # 1. Remove the extension, and $U if already installed.
-+ ac_i=`echo "$ac_i" |
-+ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-+ # 2. Add them.
-+ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-+ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
-+done
-+LIBOBJS=$ac_libobjs
-+
-+LTLIBOBJS=$ac_ltlibobjs
-+
-+
-+
-+: ${CONFIG_STATUS=./config.status}
-+ac_clean_files_save=$ac_clean_files
-+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-+echo "$as_me: creating $CONFIG_STATUS" >&6;}
-+cat >$CONFIG_STATUS <<_ACEOF
-+#! $SHELL
-+# Generated by $as_me.
-+# Run this file to recreate the current configuration.
-+# Compiler output produced by configure, useful for debugging
-+# configure, is in config.log if it exists.
-+
-+debug=false
-+ac_cs_recheck=false
-+ac_cs_silent=false
-+SHELL=\${CONFIG_SHELL-$SHELL}
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+## --------------------- ##
-+## M4sh Initialization. ##
-+## --------------------- ##
-+
-+# Be Bourne compatible
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-+ set -o posix
-+fi
-+DUALCASE=1; export DUALCASE # for MKS sh
-+
-+# Support unset when possible.
-+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-+ as_unset=unset
-+else
-+ as_unset=false
-+fi
-+
-+
-+# Work around bugs in pre-3.0 UWIN ksh.
-+$as_unset ENV MAIL MAILPATH
-+PS1='$ '
-+PS2='> '
-+PS4='+ '
-+
-+# NLS nuisances.
-+for as_var in \
-+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-+ LC_TELEPHONE LC_TIME
-+do
-+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-+ eval $as_var=C; export $as_var
-+ else
-+ $as_unset $as_var
-+ fi
-+done
-+
-+# Required to use basename.
-+if expr a : '\(a\)' >/dev/null 2>&1; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-+ as_basename=basename
-+else
-+ as_basename=false
-+fi
-+
-+
-+# Name of the executable.
-+as_me=`$as_basename "$0" ||
-+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-+ X"$0" : 'X\(//\)$' \| \
-+ X"$0" : 'X\(/\)$' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X/"$0" |
-+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-+ /^X\/\(\/\/\)$/{ s//\1/; q; }
-+ /^X\/\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+
-+
-+# PATH needs CR, and LINENO needs CR and PATH.
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
-+fi
-+
-+
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x$as_lineno_3" = "x$as_lineno_2" || {
-+ # Find who we are. Look in the path if we contain no path at all
-+ # relative or not.
-+ case $0 in
-+ *[\\/]* ) as_myself=$0 ;;
-+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+
-+ ;;
-+ esac
-+ # We did not find ourselves, most probably we were run as `sh COMMAND'
-+ # in which case we are not to be found in the path.
-+ if test "x$as_myself" = x; then
-+ as_myself=$0
-+ fi
-+ if test ! -f "$as_myself"; then
-+ { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi
-+ case $CONFIG_SHELL in
-+ '')
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for as_base in sh bash ksh sh5; do
-+ case $as_dir in
-+ /*)
-+ if ("$as_dir/$as_base" -c '
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
-+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-+ CONFIG_SHELL=$as_dir/$as_base
-+ export CONFIG_SHELL
-+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-+ fi;;
-+ esac
-+ done
-+done
-+;;
-+ esac
-+
-+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-+ # uniformly replaced by the line number. The first 'sed' inserts a
-+ # line-number line before each line; the second 'sed' does the real
-+ # work. The second script uses 'N' to pair each line-number line
-+ # with the numbered line, and appends trailing '-' during
-+ # substitution so that $LINENO is not a special case at line end.
-+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
-+ sed '=' <$as_myself |
-+ sed '
-+ N
-+ s,$,-,
-+ : loop
-+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-+ t loop
-+ s,-$,,
-+ s,^['$as_cr_digits']*\n,,
-+ ' >$as_me.lineno &&
-+ chmod +x $as_me.lineno ||
-+ { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+ # Don't try to exec as it changes $[0], causing all sort of problems
-+ # (the dirname of $[0] is not the place where we might find the
-+ # original and so on. Autoconf is especially sensible to this).
-+ . ./$as_me.lineno
-+ # Exit status is that of the last command.
-+ exit
-+}
-+
-+
-+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-+ *c*,-n*) ECHO_N= ECHO_C='
-+' ECHO_T=' ' ;;
-+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-+esac
-+
-+if expr a : '\(a\)' >/dev/null 2>&1; then
-+ as_expr=expr
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_iswalnum=no"
--fi
--rm -f conftest*
-+ as_expr=false
- fi
-
--if eval "test \"`echo '$ac_cv_func_'iswalnum`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- :
--else
-- echo "$ac_t""no" 1>&6
--echo $ac_n "checking for iswalnum in -lw""... $ac_c" 1>&6
--echo "configure:6671: checking for iswalnum in -lw" >&5
--ac_lib_var=`echo w'_'iswalnum | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+rm -f conf$$ conf$$.exe conf$$.file
-+echo >conf$$.file
-+if ln -s conf$$.file conf$$ 2>/dev/null; then
-+ # We could just check for DJGPP; but this test a) works b) is more generic
-+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-+ if test -f conf$$.exe; then
-+ # Don't use ln at all; we don't have any links
-+ as_ln_s='cp -p'
-+ else
-+ as_ln_s='ln -s'
-+ fi
-+elif ln conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s=ln
- else
-- ac_save_LIBS="$LIBS"
--LIBS="-lw $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 6679 "configure"
--#include "confdefs.h"
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char iswalnum();
-+ as_ln_s='cp -p'
-+fi
-+rm -f conf$$ conf$$.exe conf$$.file
-
--int main() {
--iswalnum()
--; return 0; }
--EOF
--if { (eval echo configure:6690: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
-+if mkdir -p . 2>/dev/null; then
-+ as_mkdir_p=:
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
-+ test -d ./-p && rmdir ./-p
-+ as_mkdir_p=false
- fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
-
-+as_executable_p="test -f"
-+
-+# Sed expression to map a string onto a valid CPP name.
-+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-+
-+# Sed expression to map a string onto a valid variable name.
-+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-+
-+
-+# IFS
-+# We need space, tab and new line, in precisely that order.
-+as_nl='
-+'
-+IFS=" $as_nl"
-+
-+# CDPATH.
-+$as_unset CDPATH
-+
-+exec 6>&1
-+
-+# Open the log real soon, to keep \$[0] and so on meaningful, and to
-+# report actual input values of CONFIG_FILES etc. instead of their
-+# values after options handling. Logging --version etc. is OK.
-+exec 5>>config.log
-+{
-+ echo
-+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-+## Running $as_me. ##
-+_ASBOX
-+} >&5
-+cat >&5 <<_CSEOF
-+
-+This file was extended by $as_me, which was
-+generated by GNU Autoconf 2.59. Invocation command line was
-+
-+ CONFIG_FILES = $CONFIG_FILES
-+ CONFIG_HEADERS = $CONFIG_HEADERS
-+ CONFIG_LINKS = $CONFIG_LINKS
-+ CONFIG_COMMANDS = $CONFIG_COMMANDS
-+ $ $0 $@
-+
-+_CSEOF
-+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-+echo >&5
-+_ACEOF
-+
-+# Files that config.status was made for.
-+if test -n "$ac_config_files"; then
-+ echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
- fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- GDK_WLIBS=-lw
--else
-- echo "$ac_t""no" 1>&6
-+
-+if test -n "$ac_config_headers"; then
-+ echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
- fi
-
-+if test -n "$ac_config_links"; then
-+ echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
- fi
-
-+if test -n "$ac_config_commands"; then
-+ echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-+fi
-
--# The following is necessary for Linux libc-5.4.38
--oLIBS="$LIBS"
--LIBS="$LIBS $GDK_WLIBS"
--echo $ac_n "checking if iswalnum() and friends are properly defined""... $ac_c" 1>&6
--echo "configure:6717: checking if iswalnum() and friends are properly defined" >&5
--cat > conftest.$ac_ext <<EOF
--#line 6719 "configure"
--#include "confdefs.h"
--#include <stdlib.h>
--int main() {
-+cat >>$CONFIG_STATUS <<\_ACEOF
-
--#if (defined(HAVE_WCTYPE_H) || defined(HAVE_WCHAR_H))
--# ifdef HAVE_WCTYPE_H
--# include <wctype.h>
--# else
--# ifdef HAVE_WCHAR_H
--# include <wchar.h>
--# endif
--# endif
--#else
--# define iswalnum(c) ((wchar_t)(c) <= 0xFF && isalnum(c))
--#endif
--iswalnum((wchar_t) 0);
-+ac_cs_usage="\
-+\`$as_me' instantiates files from templates according to the
-+current configuration.
-
--; return 0; }
--EOF
--if { (eval echo configure:6739: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- gtk_ok=yes
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- gtk_ok=no
--fi
--rm -f conftest*
--LIBS="$oLIBS"
-+Usage: $0 [OPTIONS] [FILE]...
-
--if test $gtk_ok = no; then
-- cat >> confdefs.h <<\EOF
--#define HAVE_BROKEN_WCTYPE 1
--EOF
-+ -h, --help print this help, then exit
-+ -V, --version print version number, then exit
-+ -q, --quiet do not print progress messages
-+ -d, --debug don't remove temporary files
-+ --recheck update $as_me by reconfiguring in the same conditions
-+ --file=FILE[:TEMPLATE]
-+ instantiate the configuration file FILE
-+ --header=FILE[:TEMPLATE]
-+ instantiate the configuration header FILE
-
-- GDK_WLIBS=
--fi
--echo "$ac_t""$gtk_ok" 1>&6
-+Configuration files:
-+$config_files
-
-+Configuration headers:
-+$config_headers
-
-+Configuration links:
-+$config_links
-
-+Configuration commands:
-+$config_commands
-
-+Report bugs to <bug-autoconf@gnu.org>."
-+_ACEOF
-
-+cat >>$CONFIG_STATUS <<_ACEOF
-+ac_cs_version="\\
-+config.status
-+configured by $0, generated by GNU Autoconf 2.59,
-+ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
-
--trap '' 1 2 15
--cat > confcache <<\EOF
--# This file is a shell script that caches the results of configure
--# tests run on this system so they can be shared between configure
--# scripts and configure runs. It is not useful on other systems.
--# If it contains results you don't want to keep, you may remove or edit it.
--#
--# By default, configure uses ./config.cache as the cache file,
--# creating it if it does not exist already. You can give configure
--# the --cache-file=FILE option to use a different cache file; that is
--# what configure does when it calls configure scripts in
--# subdirectories, so they share the cache.
--# Giving --cache-file=/dev/null disables caching, for debugging configure.
--# config.status only pays attention to the cache file if you give it the
--# --recheck option to rerun configure.
--#
--EOF
--# The following way of writing the cache mishandles newlines in values,
--# but we know of no workaround that is simple, portable, and efficient.
--# So, don't put newlines in cache variables' values.
--# Ultrix sh set writes to stderr and can't be redirected directly,
--# and sets the high bit in the cache file unless we assign to the vars.
--(set) 2>&1 |
-- case `(ac_space=' '; set | grep ac_space) 2>&1` in
-- *ac_space=\ *)
-- # `set' does not quote correctly, so add quotes (double-quote substitution
-- # turns \\\\ into \\, and sed turns \\ into \).
-- sed -n \
-- -e "s/'/'\\\\''/g" \
-- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-+Copyright (C) 2003 Free Software Foundation, Inc.
-+This config.status script is free software; the Free Software Foundation
-+gives unlimited permission to copy, distribute and modify it."
-+srcdir=$srcdir
-+INSTALL="$INSTALL"
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+# If no file are specified by the user, then we need to provide default
-+# value. By we need to know if files were specified by the user.
-+ac_need_defaults=:
-+while test $# != 0
-+do
-+ case $1 in
-+ --*=*)
-+ ac_option=`expr "x$1" : 'x\([^=]*\)='`
-+ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
-+ ac_shift=:
- ;;
-- *)
-- # `set' quotes correctly as required by POSIX, so do not add quotes.
-- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-+ -*)
-+ ac_option=$1
-+ ac_optarg=$2
-+ ac_shift=shift
- ;;
-- esac >> confcache
--if cmp -s $cache_file confcache; then
-- :
--else
-- if test -w $cache_file; then
-- echo "updating cache $cache_file"
-- cat confcache > $cache_file
-- else
-- echo "not updating unwritable cache $cache_file"
-- fi
--fi
--rm -f confcache
-+ *) # This is not an option, so the user has probably given explicit
-+ # arguments.
-+ ac_option=$1
-+ ac_need_defaults=false;;
-+ esac
-
--trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-+ case $ac_option in
-+ # Handling of the options.
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-+ ac_cs_recheck=: ;;
-+ --version | --vers* | -V )
-+ echo "$ac_cs_version"; exit 0 ;;
-+ --he | --h)
-+ # Conflict between --help and --header
-+ { { echo "$as_me:$LINENO: error: ambiguous option: $1
-+Try \`$0 --help' for more information." >&5
-+echo "$as_me: error: ambiguous option: $1
-+Try \`$0 --help' for more information." >&2;}
-+ { (exit 1); exit 1; }; };;
-+ --help | --hel | -h )
-+ echo "$ac_cs_usage"; exit 0 ;;
-+ --debug | --d* | -d )
-+ debug=: ;;
-+ --file | --fil | --fi | --f )
-+ $ac_shift
-+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-+ ac_need_defaults=false;;
-+ --header | --heade | --head | --hea )
-+ $ac_shift
-+ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
-+ ac_need_defaults=false;;
-+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
-+ ac_cs_silent=: ;;
-
--test "x$prefix" = xNONE && prefix=$ac_default_prefix
--# Let make expand exec_prefix.
--test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-+ # This is an error.
-+ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-+Try \`$0 --help' for more information." >&5
-+echo "$as_me: error: unrecognized option: $1
-+Try \`$0 --help' for more information." >&2;}
-+ { (exit 1); exit 1; }; } ;;
-
--# Any assignment to VPATH causes Sun make to only execute
--# the first set of double-colon rules, so remove it if not needed.
--# If there is a colon in the path, we need to keep it.
--if test "x$srcdir" = x.; then
-- ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
--fi
-+ *) ac_config_targets="$ac_config_targets $1" ;;
-+
-+ esac
-+ shift
-+done
-
--trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-+ac_configure_extra_args=
-
--DEFS=-DHAVE_CONFIG_H
-+if $ac_cs_silent; then
-+ exec 6>/dev/null
-+ ac_configure_extra_args="$ac_configure_extra_args --silent"
-+fi
-
--# Without the "./", some shells look in PATH for config.status.
--: ${CONFIG_STATUS=./config.status}
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+if \$ac_cs_recheck; then
-+ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-+ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-+fi
-
--echo creating $CONFIG_STATUS
--rm -f $CONFIG_STATUS
--cat > $CONFIG_STATUS <<EOF
--#! /bin/sh
--# Generated automatically by configure.
--# Run this file to recreate the current configuration.
--# This directory was configured as follows,
--# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
- #
--# $0 $ac_configure_args
-+# INIT-COMMANDS section.
- #
--# Compiler output produced by configure, useful for debugging
--# configure, is in ./config.log if it exists.
-
--ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
--for ac_option
-+
-+
-+
-+_ACEOF
-+
-+
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+for ac_config_target in $ac_config_targets
- do
-- case "\$ac_option" in
-- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-- echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-- exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-- -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-- echo "$CONFIG_STATUS generated by autoconf version 2.13"
-- exit 0 ;;
-- -help | --help | --hel | --he | --h)
-- echo "\$ac_cs_usage"; exit 0 ;;
-- *) echo "\$ac_cs_usage"; exit 1 ;;
-+ case "$ac_config_target" in
-+ # Handling of arguments.
-+ "gtk+.spec" ) CONFIG_FILES="$CONFIG_FILES gtk+.spec" ;;
-+ "docs/gtk-config.1" ) CONFIG_FILES="$CONFIG_FILES docs/gtk-config.1" ;;
-+ "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-+ "gtk-config" ) CONFIG_FILES="$CONFIG_FILES gtk-config" ;;
-+ "po/Makefile.in" ) CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
-+ "docs/Makefile" ) CONFIG_FILES="$CONFIG_FILES docs/Makefile" ;;
-+ "gdk/Makefile" ) CONFIG_FILES="$CONFIG_FILES gdk/Makefile" ;;
-+ "gtk/Makefile" ) CONFIG_FILES="$CONFIG_FILES gtk/Makefile" ;;
-+ "gtk/gtkfeatures.h" ) CONFIG_FILES="$CONFIG_FILES gtk/gtkfeatures.h" ;;
-+ "gdk.pc" ) CONFIG_FILES="$CONFIG_FILES gdk.pc" ;;
-+ "gtk+.pc" ) CONFIG_FILES="$CONFIG_FILES gtk+.pc" ;;
-+ "$ac_config_links_1" ) CONFIG_LINKS="$CONFIG_LINKS $ac_config_links_1" ;;
-+ "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
-+ "default-2" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-2" ;;
-+ "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
-+ "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
-+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-+ { (exit 1); exit 1; }; };;
- esac
- done
-
--ac_given_srcdir=$srcdir
--ac_given_INSTALL="$INSTALL"
--
--trap 'rm -fr `echo "
--gtk+.spec
--docs/gtk-config.1
--Makefile
--gtk-config
--po/Makefile.in
--docs/Makefile
--gdk/Makefile
--gtk/Makefile
--gtk/gtkfeatures.h
--gdk.pc
--gtk+.pc
-- config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
--EOF
--cat >> $CONFIG_STATUS <<EOF
-+# If the user did not use the arguments to specify the items to instantiate,
-+# then the envvar interface is used. Set only those that are not.
-+# We use the long form for the default assignment because of an extremely
-+# bizarre bug on SunOS 4.1.3.
-+if $ac_need_defaults; then
-+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-+ test "${CONFIG_LINKS+set}" = set || CONFIG_LINKS=$config_links
-+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-+fi
-+
-+# Have a temporary directory for convenience. Make it in the build tree
-+# simply because there is no reason to put it here, and in addition,
-+# creating and moving files from /tmp can sometimes cause problems.
-+# Create a temporary directory, and hook for its removal unless debugging.
-+$debug ||
-+{
-+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-+ trap '{ (exit 1); exit 1; }' 1 2 13 15
-+}
-
--# Protect against being on the right side of a sed subst in config.status.
--sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
-- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
--$ac_vpsub
--$extrasub
--s%@SHELL@%$SHELL%g
--s%@CFLAGS@%$CFLAGS%g
--s%@CPPFLAGS@%$CPPFLAGS%g
--s%@CXXFLAGS@%$CXXFLAGS%g
--s%@FFLAGS@%$FFLAGS%g
--s%@DEFS@%$DEFS%g
--s%@LDFLAGS@%$LDFLAGS%g
--s%@LIBS@%$LIBS%g
--s%@exec_prefix@%$exec_prefix%g
--s%@prefix@%$prefix%g
--s%@program_transform_name@%$program_transform_name%g
--s%@bindir@%$bindir%g
--s%@sbindir@%$sbindir%g
--s%@libexecdir@%$libexecdir%g
--s%@datadir@%$datadir%g
--s%@sysconfdir@%$sysconfdir%g
--s%@sharedstatedir@%$sharedstatedir%g
--s%@localstatedir@%$localstatedir%g
--s%@libdir@%$libdir%g
--s%@includedir@%$includedir%g
--s%@oldincludedir@%$oldincludedir%g
--s%@infodir@%$infodir%g
--s%@mandir@%$mandir%g
--s%@GTK_MAJOR_VERSION@%$GTK_MAJOR_VERSION%g
--s%@GTK_MINOR_VERSION@%$GTK_MINOR_VERSION%g
--s%@GTK_MICRO_VERSION@%$GTK_MICRO_VERSION%g
--s%@GTK_INTERFACE_AGE@%$GTK_INTERFACE_AGE%g
--s%@GTK_BINARY_AGE@%$GTK_BINARY_AGE%g
--s%@GTK_VERSION@%$GTK_VERSION%g
--s%@LT_RELEASE@%$LT_RELEASE%g
--s%@LT_CURRENT@%$LT_CURRENT%g
--s%@LT_REVISION@%$LT_REVISION%g
--s%@LT_AGE@%$LT_AGE%g
--s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
--s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
--s%@INSTALL_DATA@%$INSTALL_DATA%g
--s%@PACKAGE@%$PACKAGE%g
--s%@VERSION@%$VERSION%g
--s%@ACLOCAL@%$ACLOCAL%g
--s%@AUTOCONF@%$AUTOCONF%g
--s%@AUTOMAKE@%$AUTOMAKE%g
--s%@AUTOHEADER@%$AUTOHEADER%g
--s%@MAKEINFO@%$MAKEINFO%g
--s%@SET_MAKE@%$SET_MAKE%g
--s%@host@%$host%g
--s%@host_alias@%$host_alias%g
--s%@host_cpu@%$host_cpu%g
--s%@host_vendor@%$host_vendor%g
--s%@host_os@%$host_os%g
--s%@build@%$build%g
--s%@build_alias@%$build_alias%g
--s%@build_cpu@%$build_cpu%g
--s%@build_vendor@%$build_vendor%g
--s%@build_os@%$build_os%g
--s%@RANLIB@%$RANLIB%g
--s%@CC@%$CC%g
--s%@LN_S@%$LN_S%g
--s%@LIBTOOL@%$LIBTOOL%g
--s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
--s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
--s%@MAINT@%$MAINT%g
--s%@AWK@%$AWK%g
--s%@PERL@%$PERL%g
--s%@INDENT@%$INDENT%g
--s%@REBUILD@%$REBUILD%g
--s%@STRIP_DUMMY@%$STRIP_DUMMY%g
--s%@STRIP_BEGIN@%$STRIP_BEGIN%g
--s%@STRIP_END@%$STRIP_END%g
--s%@CPP@%$CPP%g
--s%@ALLOCA@%$ALLOCA%g
--s%@USE_NLS@%$USE_NLS%g
--s%@MSGFMT@%$MSGFMT%g
--s%@GMSGFMT@%$GMSGFMT%g
--s%@XGETTEXT@%$XGETTEXT%g
--s%@GENCAT@%$GENCAT%g
--s%@USE_INCLUDED_LIBINTL@%$USE_INCLUDED_LIBINTL%g
--s%@CATALOGS@%$CATALOGS%g
--s%@CATOBJEXT@%$CATOBJEXT%g
--s%@DATADIRNAME@%$DATADIRNAME%g
--s%@GMOFILES@%$GMOFILES%g
--s%@INSTOBJEXT@%$INSTOBJEXT%g
--s%@INTLDEPS@%$INTLDEPS%g
--s%@INTLLIBS@%$INTLLIBS%g
--s%@INTLOBJS@%$INTLOBJS%g
--s%@POFILES@%$POFILES%g
--s%@POSUB@%$POSUB%g
--s%@INCLUDE_LOCALE_H@%$INCLUDE_LOCALE_H%g
--s%@GT_NO@%$GT_NO%g
--s%@GT_YES@%$GT_YES%g
--s%@MKINSTALLDIRS@%$MKINSTALLDIRS%g
--s%@l@%$l%g
--s%@gtklocaledir@%$gtklocaledir%g
--s%@GLIB_CONFIG@%$GLIB_CONFIG%g
--s%@GLIB_CFLAGS@%$GLIB_CFLAGS%g
--s%@GLIB_LIBS@%$GLIB_LIBS%g
--s%@glib_cflags@%$glib_cflags%g
--s%@glib_libs@%$glib_libs%g
--s%@glib_thread_cflags@%$glib_thread_cflags%g
--s%@glib_thread_libs@%$glib_thread_libs%g
--s%@GLIB_DEPLIBS@%$GLIB_DEPLIBS%g
--s%@X_CFLAGS@%$X_CFLAGS%g
--s%@X_PRE_LIBS@%$X_PRE_LIBS%g
--s%@X_LIBS@%$X_LIBS%g
--s%@X_EXTRA_LIBS@%$X_EXTRA_LIBS%g
--s%@x_cflags@%$x_cflags%g
--s%@x_includes@%$x_includes%g
--s%@x_ldflags@%$x_ldflags%g
--s%@x_libs@%$x_libs%g
--s%@xinput_progs@%$xinput_progs%g
--s%@GDK_WLIBS@%$GDK_WLIBS%g
--s%@GTK_DEBUG_FLAGS@%$GTK_DEBUG_FLAGS%g
--s%@GTK_XIM_FLAGS@%$GTK_XIM_FLAGS%g
--s%@GTK_LOCALE_FLAGS@%$GTK_LOCALE_FLAGS%g
-+# Create a (secure) tmp directory for tmp files.
-+
-+{
-+ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
-+ test -n "$tmp" && test -d "$tmp"
-+} ||
-+{
-+ tmp=./confstat$$-$RANDOM
-+ (umask 077 && mkdir $tmp)
-+} ||
-+{
-+ echo "$me: cannot create a temporary directory in ." >&2
-+ { (exit 1); exit 1; }
-+}
-+
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
-+
-+#
-+# CONFIG_FILES section.
-+#
-
-+# No need to generate the scripts if there are no CONFIG_FILES.
-+# This happens for instance when ./config.status config.h
-+if test -n "\$CONFIG_FILES"; then
-+ # Protect against being on the right side of a sed subst in config.status.
-+ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-+ s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-+s, at SHELL@,$SHELL,;t t
-+s, at PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-+s, at PACKAGE_NAME@,$PACKAGE_NAME,;t t
-+s, at PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-+s, at PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-+s, at PACKAGE_STRING@,$PACKAGE_STRING,;t t
-+s, at PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-+s, at exec_prefix@,$exec_prefix,;t t
-+s, at prefix@,$prefix,;t t
-+s, at program_transform_name@,$program_transform_name,;t t
-+s, at bindir@,$bindir,;t t
-+s, at sbindir@,$sbindir,;t t
-+s, at libexecdir@,$libexecdir,;t t
-+s, at datadir@,$datadir,;t t
-+s, at sysconfdir@,$sysconfdir,;t t
-+s, at sharedstatedir@,$sharedstatedir,;t t
-+s, at localstatedir@,$localstatedir,;t t
-+s, at libdir@,$libdir,;t t
-+s, at includedir@,$includedir,;t t
-+s, at oldincludedir@,$oldincludedir,;t t
-+s, at infodir@,$infodir,;t t
-+s, at mandir@,$mandir,;t t
-+s, at build_alias@,$build_alias,;t t
-+s, at host_alias@,$host_alias,;t t
-+s, at target_alias@,$target_alias,;t t
-+s, at DEFS@,$DEFS,;t t
-+s, at ECHO_C@,$ECHO_C,;t t
-+s, at ECHO_N@,$ECHO_N,;t t
-+s, at ECHO_T@,$ECHO_T,;t t
-+s, at LIBS@,$LIBS,;t t
-+s, at GTK_MAJOR_VERSION@,$GTK_MAJOR_VERSION,;t t
-+s, at GTK_MINOR_VERSION@,$GTK_MINOR_VERSION,;t t
-+s, at GTK_MICRO_VERSION@,$GTK_MICRO_VERSION,;t t
-+s, at GTK_INTERFACE_AGE@,$GTK_INTERFACE_AGE,;t t
-+s, at GTK_BINARY_AGE@,$GTK_BINARY_AGE,;t t
-+s, at GTK_VERSION@,$GTK_VERSION,;t t
-+s, at LT_RELEASE@,$LT_RELEASE,;t t
-+s, at LT_CURRENT@,$LT_CURRENT,;t t
-+s, at LT_REVISION@,$LT_REVISION,;t t
-+s, at LT_AGE@,$LT_AGE,;t t
-+s, at INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-+s, at INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-+s, at INSTALL_DATA@,$INSTALL_DATA,;t t
-+s, at PACKAGE@,$PACKAGE,;t t
-+s, at VERSION@,$VERSION,;t t
-+s, at ACLOCAL@,$ACLOCAL,;t t
-+s, at AUTOCONF@,$AUTOCONF,;t t
-+s, at AUTOMAKE@,$AUTOMAKE,;t t
-+s, at AUTOHEADER@,$AUTOHEADER,;t t
-+s, at MAKEINFO@,$MAKEINFO,;t t
-+s, at SET_MAKE@,$SET_MAKE,;t t
-+s, at build@,$build,;t t
-+s, at build_cpu@,$build_cpu,;t t
-+s, at build_vendor@,$build_vendor,;t t
-+s, at build_os@,$build_os,;t t
-+s, at host@,$host,;t t
-+s, at host_cpu@,$host_cpu,;t t
-+s, at host_vendor@,$host_vendor,;t t
-+s, at host_os@,$host_os,;t t
-+s, at CC@,$CC,;t t
-+s, at CFLAGS@,$CFLAGS,;t t
-+s, at LDFLAGS@,$LDFLAGS,;t t
-+s, at CPPFLAGS@,$CPPFLAGS,;t t
-+s, at ac_ct_CC@,$ac_ct_CC,;t t
-+s, at EXEEXT@,$EXEEXT,;t t
-+s, at OBJEXT@,$OBJEXT,;t t
-+s, at EGREP@,$EGREP,;t t
-+s, at LN_S@,$LN_S,;t t
-+s, at ECHO@,$ECHO,;t t
-+s, at AR@,$AR,;t t
-+s, at ac_ct_AR@,$ac_ct_AR,;t t
-+s, at RANLIB@,$RANLIB,;t t
-+s, at ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
-+s, at STRIP@,$STRIP,;t t
-+s, at ac_ct_STRIP@,$ac_ct_STRIP,;t t
-+s, at CPP@,$CPP,;t t
-+s, at CXX@,$CXX,;t t
-+s, at CXXFLAGS@,$CXXFLAGS,;t t
-+s, at ac_ct_CXX@,$ac_ct_CXX,;t t
-+s, at CXXCPP@,$CXXCPP,;t t
-+s, at F77@,$F77,;t t
-+s, at FFLAGS@,$FFLAGS,;t t
-+s, at ac_ct_F77@,$ac_ct_F77,;t t
-+s, at LIBTOOL@,$LIBTOOL,;t t
-+s, at MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
-+s, at MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
-+s, at MAINT@,$MAINT,;t t
-+s, at AWK@,$AWK,;t t
-+s, at PERL@,$PERL,;t t
-+s, at INDENT@,$INDENT,;t t
-+s, at REBUILD@,$REBUILD,;t t
-+s, at STRIP_DUMMY@,$STRIP_DUMMY,;t t
-+s, at STRIP_BEGIN@,$STRIP_BEGIN,;t t
-+s, at STRIP_END@,$STRIP_END,;t t
-+s, at ALLOCA@,$ALLOCA,;t t
-+s, at USE_NLS@,$USE_NLS,;t t
-+s, at MSGFMT@,$MSGFMT,;t t
-+s, at GMSGFMT@,$GMSGFMT,;t t
-+s, at XGETTEXT@,$XGETTEXT,;t t
-+s, at GENCAT@,$GENCAT,;t t
-+s, at USE_INCLUDED_LIBINTL@,$USE_INCLUDED_LIBINTL,;t t
-+s, at CATALOGS@,$CATALOGS,;t t
-+s, at CATOBJEXT@,$CATOBJEXT,;t t
-+s, at DATADIRNAME@,$DATADIRNAME,;t t
-+s, at GMOFILES@,$GMOFILES,;t t
-+s, at INSTOBJEXT@,$INSTOBJEXT,;t t
-+s, at INTLDEPS@,$INTLDEPS,;t t
-+s, at INTLLIBS@,$INTLLIBS,;t t
-+s, at INTLOBJS@,$INTLOBJS,;t t
-+s, at POFILES@,$POFILES,;t t
-+s, at POSUB@,$POSUB,;t t
-+s, at INCLUDE_LOCALE_H@,$INCLUDE_LOCALE_H,;t t
-+s, at GT_NO@,$GT_NO,;t t
-+s, at GT_YES@,$GT_YES,;t t
-+s, at MKINSTALLDIRS@,$MKINSTALLDIRS,;t t
-+s, at l@,$l,;t t
-+s, at gtklocaledir@,$gtklocaledir,;t t
-+s, at GLIB_CONFIG@,$GLIB_CONFIG,;t t
-+s, at GLIB_CFLAGS@,$GLIB_CFLAGS,;t t
-+s, at GLIB_LIBS@,$GLIB_LIBS,;t t
-+s, at glib_cflags@,$glib_cflags,;t t
-+s, at glib_libs@,$glib_libs,;t t
-+s, at glib_thread_cflags@,$glib_thread_cflags,;t t
-+s, at glib_thread_libs@,$glib_thread_libs,;t t
-+s, at GLIB_DEPLIBS@,$GLIB_DEPLIBS,;t t
-+s, at X_CFLAGS@,$X_CFLAGS,;t t
-+s, at X_PRE_LIBS@,$X_PRE_LIBS,;t t
-+s, at X_LIBS@,$X_LIBS,;t t
-+s, at X_EXTRA_LIBS@,$X_EXTRA_LIBS,;t t
-+s, at PKG_CONFIG@,$PKG_CONFIG,;t t
-+s, at ac_pt_PKG_CONFIG@,$ac_pt_PKG_CONFIG,;t t
-+s, at x_cflags@,$x_cflags,;t t
-+s, at x_includes@,$x_includes,;t t
-+s, at x_ldflags@,$x_ldflags,;t t
-+s, at x_libs@,$x_libs,;t t
-+s, at xinput_progs@,$xinput_progs,;t t
-+s, at GDK_WLIBS@,$GDK_WLIBS,;t t
-+s, at GTK_DEBUG_FLAGS@,$GTK_DEBUG_FLAGS,;t t
-+s, at GTK_XIM_FLAGS@,$GTK_XIM_FLAGS,;t t
-+s, at GTK_LOCALE_FLAGS@,$GTK_LOCALE_FLAGS,;t t
-+s, at LIBOBJS@,$LIBOBJS,;t t
-+s,@LTLIBOBJS@,$LTLIBOBJS,;t t
- CEOF
--EOF
-
--cat >> $CONFIG_STATUS <<\EOF
-+_ACEOF
-
--# Split the substitutions into bite-sized pieces for seds with
--# small command number limits, like on Digital OSF/1 and HP-UX.
--ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
--ac_file=1 # Number of current file.
--ac_beg=1 # First line for current file.
--ac_end=$ac_max_sed_cmds # Line after last line for current file.
--ac_more_lines=:
--ac_sed_cmds=""
--while $ac_more_lines; do
-- if test $ac_beg -gt 1; then
-- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-- else
-- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-- fi
-- if test ! -s conftest.s$ac_file; then
-- ac_more_lines=false
-- rm -f conftest.s$ac_file
-- else
-- if test -z "$ac_sed_cmds"; then
-- ac_sed_cmds="sed -f conftest.s$ac_file"
-+ cat >>$CONFIG_STATUS <<\_ACEOF
-+ # Split the substitutions into bite-sized pieces for seds with
-+ # small command number limits, like on Digital OSF/1 and HP-UX.
-+ ac_max_sed_lines=48
-+ ac_sed_frag=1 # Number of current file.
-+ ac_beg=1 # First line for current file.
-+ ac_end=$ac_max_sed_lines # Line after last line for current file.
-+ ac_more_lines=:
-+ ac_sed_cmds=
-+ while $ac_more_lines; do
-+ if test $ac_beg -gt 1; then
-+ sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- else
-- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-+ sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-+ fi
-+ if test ! -s $tmp/subs.frag; then
-+ ac_more_lines=false
-+ else
-+ # The purpose of the label and of the branching condition is to
-+ # speed up the sed processing (if there are no `@' at all, there
-+ # is no need to browse any of the substitutions).
-+ # These are the two extra sed commands mentioned above.
-+ (echo ':t
-+ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-+ if test -z "$ac_sed_cmds"; then
-+ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-+ else
-+ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-+ fi
-+ ac_sed_frag=`expr $ac_sed_frag + 1`
-+ ac_beg=$ac_end
-+ ac_end=`expr $ac_end + $ac_max_sed_lines`
- fi
-- ac_file=`expr $ac_file + 1`
-- ac_beg=$ac_end
-- ac_end=`expr $ac_end + $ac_max_sed_cmds`
-+ done
-+ if test -z "$ac_sed_cmds"; then
-+ ac_sed_cmds=cat
- fi
--done
--if test -z "$ac_sed_cmds"; then
-- ac_sed_cmds=cat
--fi
--EOF
-+fi # test -n "$CONFIG_FILES"
-
--cat >> $CONFIG_STATUS <<EOF
--
--CONFIG_FILES=\${CONFIG_FILES-"gtk+.spec
--docs/gtk-config.1
--Makefile
--gtk-config
--po/Makefile.in
--docs/Makefile
--gdk/Makefile
--gtk/Makefile
--gtk/gtkfeatures.h
--gdk.pc
--gtk+.pc
--"}
--EOF
--cat >> $CONFIG_STATUS <<\EOF
--for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-- case "$ac_file" in
-- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-- *) ac_file_in="${ac_file}.in" ;;
-- esac
--
-- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
--
-- # Remove last slash and all that follows it. Not all systems have dirname.
-- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-- # The file is in a subdirectory.
-- test ! -d "$ac_dir" && mkdir "$ac_dir"
-- ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-- # A "../" for each directory in $ac_dir_suffix.
-- ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-- else
-- ac_dir_suffix= ac_dots=
-- fi
--
-- case "$ac_given_srcdir" in
-- .) srcdir=.
-- if test -z "$ac_dots"; then top_srcdir=.
-- else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-- /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-+ case $ac_file in
-+ - | *:- | *:-:* ) # input from stdin
-+ cat >$tmp/stdin
-+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-+ * ) ac_file_in=$ac_file.in ;;
-+ esac
-+
-+ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$ac_file" : 'X\(//\)[^/]' \| \
-+ X"$ac_file" : 'X\(//\)$' \| \
-+ X"$ac_file" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$ac_file" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ { if $as_mkdir_p; then
-+ mkdir -p "$ac_dir"
-+ else
-+ as_dir="$ac_dir"
-+ as_dirs=
-+ while test ! -d "$as_dir"; do
-+ as_dirs="$as_dir $as_dirs"
-+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$as_dir" : 'X\(//\)[^/]' \| \
-+ X"$as_dir" : 'X\(//\)$' \| \
-+ X"$as_dir" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$as_dir" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ done
-+ test ! -n "$as_dirs" || mkdir $as_dirs
-+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-+ { (exit 1); exit 1; }; }; }
-+
-+ ac_builddir=.
-+
-+if test "$ac_dir" != .; then
-+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-+ # A "../" for each directory in $ac_dir_suffix.
-+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-+else
-+ ac_dir_suffix= ac_top_builddir=
-+fi
-+
-+case $srcdir in
-+ .) # No --srcdir option. We are building in place.
-+ ac_srcdir=.
-+ if test -z "$ac_top_builddir"; then
-+ ac_top_srcdir=.
-+ else
-+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-+ fi ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute path.
-+ ac_srcdir=$srcdir$ac_dir_suffix;
-+ ac_top_srcdir=$srcdir ;;
- *) # Relative path.
-- srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-- top_srcdir="$ac_dots$ac_given_srcdir" ;;
-+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
-+esac
-+
-+# Do not use `cd foo && pwd` to compute absolute paths, because
-+# the directories may not exist.
-+case `pwd` in
-+.) ac_abs_builddir="$ac_dir";;
-+*)
-+ case "$ac_dir" in
-+ .) ac_abs_builddir=`pwd`;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
-+ esac;;
-+esac
-+case $ac_abs_builddir in
-+.) ac_abs_top_builddir=${ac_top_builddir}.;;
-+*)
-+ case ${ac_top_builddir}. in
-+ .) ac_abs_top_builddir=$ac_abs_builddir;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-+ esac;;
-+esac
-+case $ac_abs_builddir in
-+.) ac_abs_srcdir=$ac_srcdir;;
-+*)
-+ case $ac_srcdir in
-+ .) ac_abs_srcdir=$ac_abs_builddir;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-+ esac;;
-+esac
-+case $ac_abs_builddir in
-+.) ac_abs_top_srcdir=$ac_top_srcdir;;
-+*)
-+ case $ac_top_srcdir in
-+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-+ esac;;
-+esac
-+
-+
-+ case $INSTALL in
-+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-+ *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
- esac
-
-- case "$ac_given_INSTALL" in
-- [/$]*) INSTALL="$ac_given_INSTALL" ;;
-- *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-- esac
--
-- echo creating "$ac_file"
-- rm -f "$ac_file"
-- configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-- case "$ac_file" in
-- *Makefile*) ac_comsub="1i\\
--# $configure_input" ;;
-- *) ac_comsub= ;;
-- esac
--
-- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-- sed -e "$ac_comsub
--s%@configure_input@%$configure_input%g
--s%@srcdir@%$srcdir%g
--s%@top_srcdir@%$top_srcdir%g
--s%@INSTALL@%$INSTALL%g
--" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
--fi; done
--rm -f conftest.s*
-+ # Let's still pretend it is `configure' which instantiates (i.e., don't
-+ # use $as_me), people would be surprised to read:
-+ # /* config.h. Generated by config.status. */
-+ if test x"$ac_file" = x-; then
-+ configure_input=
-+ else
-+ configure_input="$ac_file. "
-+ fi
-+ configure_input=$configure_input"Generated from `echo $ac_file_in |
-+ sed 's,.*/,,'` by configure."
-+
-+ # First look for the input files in the build tree, otherwise in the
-+ # src tree.
-+ ac_file_inputs=`IFS=:
-+ for f in $ac_file_in; do
-+ case $f in
-+ -) echo $tmp/stdin ;;
-+ [\\/$]*)
-+ # Absolute (can't be DOS-style, as IFS=:)
-+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-+echo "$as_me: error: cannot find input file: $f" >&2;}
-+ { (exit 1); exit 1; }; }
-+ echo "$f";;
-+ *) # Relative
-+ if test -f "$f"; then
-+ # Build tree
-+ echo "$f"
-+ elif test -f "$srcdir/$f"; then
-+ # Source tree
-+ echo "$srcdir/$f"
-+ else
-+ # /dev/null tree
-+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-+echo "$as_me: error: cannot find input file: $f" >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi;;
-+ esac
-+ done` || { (exit 1); exit 1; }
-+
-+ if test x"$ac_file" != x-; then
-+ { echo "$as_me:$LINENO: creating $ac_file" >&5
-+echo "$as_me: creating $ac_file" >&6;}
-+ rm -f "$ac_file"
-+ fi
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+ sed "$ac_vpsub
-+$extrasub
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+:t
-+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-+s, at configure_input@,$configure_input,;t t
-+s, at srcdir@,$ac_srcdir,;t t
-+s, at abs_srcdir@,$ac_abs_srcdir,;t t
-+s, at top_srcdir@,$ac_top_srcdir,;t t
-+s, at abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-+s, at builddir@,$ac_builddir,;t t
-+s, at abs_builddir@,$ac_abs_builddir,;t t
-+s, at top_builddir@,$ac_top_builddir,;t t
-+s, at abs_top_builddir@,$ac_abs_top_builddir,;t t
-+s,@INSTALL@,$ac_INSTALL,;t t
-+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-+ rm -f $tmp/stdin
-+ if test x"$ac_file" != x-; then
-+ mv $tmp/out $ac_file
-+ else
-+ cat $tmp/out
-+ rm -f $tmp/out
-+ fi
-+
-+done
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+
-+#
-+# CONFIG_HEADER section.
-+#
-
- # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
- # NAME is the cpp macro being defined and VALUE is the value it is being given.
- #
- # ac_d sets the value in "#define NAME VALUE" lines.
--ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
--ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
--ac_dC='\3'
--ac_dD='%g'
--# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
--ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
--ac_uB='\([ ]\)%\1#\2define\3'
-+ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
-+ac_dB='[ ].*$,\1#\2'
-+ac_dC=' '
-+ac_dD=',;t'
-+# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-+ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
-+ac_uB='$,\1#\2define\3'
- ac_uC=' '
--ac_uD='\4%g'
--# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
--ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
--ac_eB='$%\1#\2define\3'
--ac_eC=' '
--ac_eD='%g'
-+ac_uD=',;t'
-
--if test "${CONFIG_HEADERS+set}" != set; then
--EOF
--cat >> $CONFIG_STATUS <<EOF
-- CONFIG_HEADERS="config.h"
--EOF
--cat >> $CONFIG_STATUS <<\EOF
--fi
--for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
-+for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-- case "$ac_file" in
-- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-- *) ac_file_in="${ac_file}.in" ;;
-+ case $ac_file in
-+ - | *:- | *:-:* ) # input from stdin
-+ cat >$tmp/stdin
-+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-+ * ) ac_file_in=$ac_file.in ;;
- esac
-
-- echo creating $ac_file
--
-- rm -f conftest.frag conftest.in conftest.out
-- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-- cat $ac_file_inputs > conftest.in
--
--EOF
-+ test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-+echo "$as_me: creating $ac_file" >&6;}
-
--# Transform confdefs.h into a sed script conftest.vals that substitutes
--# the proper values into config.h.in to produce config.h. And first:
--# Protect against being on the right side of a sed subst in config.status.
--# Protect against being in an unquoted here document in config.status.
--rm -f conftest.vals
--cat > conftest.hdr <<\EOF
--s/[\\&%]/\\&/g
--s%[\\$`]%\\&%g
--s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
--s%ac_d%ac_u%gp
--s%ac_u%ac_e%gp
--EOF
--sed -n -f conftest.hdr confdefs.h > conftest.vals
--rm -f conftest.hdr
-+ # First look for the input files in the build tree, otherwise in the
-+ # src tree.
-+ ac_file_inputs=`IFS=:
-+ for f in $ac_file_in; do
-+ case $f in
-+ -) echo $tmp/stdin ;;
-+ [\\/$]*)
-+ # Absolute (can't be DOS-style, as IFS=:)
-+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-+echo "$as_me: error: cannot find input file: $f" >&2;}
-+ { (exit 1); exit 1; }; }
-+ # Do quote $f, to prevent DOS paths from being IFS'd.
-+ echo "$f";;
-+ *) # Relative
-+ if test -f "$f"; then
-+ # Build tree
-+ echo "$f"
-+ elif test -f "$srcdir/$f"; then
-+ # Source tree
-+ echo "$srcdir/$f"
-+ else
-+ # /dev/null tree
-+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-+echo "$as_me: error: cannot find input file: $f" >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi;;
-+ esac
-+ done` || { (exit 1); exit 1; }
-+ # Remove the trailing spaces.
-+ sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
-+
-+_ACEOF
-+
-+# Transform confdefs.h into two sed scripts, `conftest.defines' and
-+# `conftest.undefs', that substitutes the proper values into
-+# config.h.in to produce config.h. The first handles `#define'
-+# templates, and the second `#undef' templates.
-+# And first: Protect against being on the right side of a sed subst in
-+# config.status. Protect against being in an unquoted here document
-+# in config.status.
-+rm -f conftest.defines conftest.undefs
-+# Using a here document instead of a string reduces the quoting nightmare.
-+# Putting comments in sed scripts is not portable.
-+#
-+# `end' is used to avoid that the second main sed command (meant for
-+# 0-ary CPP macros) applies to n-ary macro definitions.
-+# See the Autoconf documentation for `clear'.
-+cat >confdef2sed.sed <<\_ACEOF
-+s/[\\&,]/\\&/g
-+s,[\\$`],\\&,g
-+t clear
-+: clear
-+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
-+t end
-+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
-+: end
-+_ACEOF
-+# If some macros were called several times there might be several times
-+# the same #defines, which is useless. Nevertheless, we may not want to
-+# sort them, since we want the *last* AC-DEFINE to be honored.
-+uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
-+sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
-+rm -f confdef2sed.sed
-
- # This sed command replaces #undef with comments. This is necessary, for
- # example, in the case of _POSIX_SOURCE, which is predefined and required
- # on some systems where configure will not decide to define it.
--cat >> conftest.vals <<\EOF
--s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
--EOF
--
--# Break up conftest.vals because some shells have a limit on
--# the size of here documents, and old seds have small limits too.
--
-+cat >>conftest.undefs <<\_ACEOF
-+s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-+_ACEOF
-+
-+# Break up conftest.defines because some shells have a limit on the size
-+# of here documents, and old seds have small limits too (100 cmds).
-+echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-+echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
-+echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
-+echo ' :' >>$CONFIG_STATUS
- rm -f conftest.tail
--while :
-+while grep . conftest.defines >/dev/null
- do
-- ac_lines=`grep -c . conftest.vals`
-- # grep -c gives empty output for an empty file on some AIX systems.
-- if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
-- # Write a limited-size here document to conftest.frag.
-- echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
-- sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
-+ # Write a limited-size here document to $tmp/defines.sed.
-+ echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
-+ # Speed up: don't consider the non `#define' lines.
-+ echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
-+ # Work around the forget-to-reset-the-flag bug.
-+ echo 't clr' >>$CONFIG_STATUS
-+ echo ': clr' >>$CONFIG_STATUS
-+ sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
- echo 'CEOF
-- sed -f conftest.frag conftest.in > conftest.out
-- rm -f conftest.in
-- mv conftest.out conftest.in
--' >> $CONFIG_STATUS
-- sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
-- rm -f conftest.vals
-- mv conftest.tail conftest.vals
--done
--rm -f conftest.vals
--
--cat >> $CONFIG_STATUS <<\EOF
-- rm -f conftest.frag conftest.h
-- echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
-- cat conftest.in >> conftest.h
-- rm -f conftest.in
-- if cmp -s $ac_file conftest.h 2>/dev/null; then
-- echo "$ac_file is unchanged"
-- rm -f conftest.h
-- else
-- # Remove last slash and all that follows it. Not all systems have dirname.
-- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-- # The file is in a subdirectory.
-- test ! -d "$ac_dir" && mkdir "$ac_dir"
-- fi
-- rm -f $ac_file
-- mv conftest.h $ac_file
-+ sed -f $tmp/defines.sed $tmp/in >$tmp/out
-+ rm -f $tmp/in
-+ mv $tmp/out $tmp/in
-+' >>$CONFIG_STATUS
-+ sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
-+ rm -f conftest.defines
-+ mv conftest.tail conftest.defines
-+done
-+rm -f conftest.defines
-+echo ' fi # grep' >>$CONFIG_STATUS
-+echo >>$CONFIG_STATUS
-+
-+# Break up conftest.undefs because some shells have a limit on the size
-+# of here documents, and old seds have small limits too (100 cmds).
-+echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
-+rm -f conftest.tail
-+while grep . conftest.undefs >/dev/null
-+do
-+ # Write a limited-size here document to $tmp/undefs.sed.
-+ echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
-+ # Speed up: don't consider the non `#undef'
-+ echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
-+ # Work around the forget-to-reset-the-flag bug.
-+ echo 't clr' >>$CONFIG_STATUS
-+ echo ': clr' >>$CONFIG_STATUS
-+ sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
-+ echo 'CEOF
-+ sed -f $tmp/undefs.sed $tmp/in >$tmp/out
-+ rm -f $tmp/in
-+ mv $tmp/out $tmp/in
-+' >>$CONFIG_STATUS
-+ sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
-+ rm -f conftest.undefs
-+ mv conftest.tail conftest.undefs
-+done
-+rm -f conftest.undefs
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+ # Let's still pretend it is `configure' which instantiates (i.e., don't
-+ # use $as_me), people would be surprised to read:
-+ # /* config.h. Generated by config.status. */
-+ if test x"$ac_file" = x-; then
-+ echo "/* Generated by configure. */" >$tmp/config.h
-+ else
-+ echo "/* $ac_file. Generated by configure. */" >$tmp/config.h
- fi
--fi; done
-+ cat $tmp/in >>$tmp/config.h
-+ rm -f $tmp/in
-+ if test x"$ac_file" != x-; then
-+ if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
-+ { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-+echo "$as_me: $ac_file is unchanged" >&6;}
-+ else
-+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$ac_file" : 'X\(//\)[^/]' \| \
-+ X"$ac_file" : 'X\(//\)$' \| \
-+ X"$ac_file" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$ac_file" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ { if $as_mkdir_p; then
-+ mkdir -p "$ac_dir"
-+ else
-+ as_dir="$ac_dir"
-+ as_dirs=
-+ while test ! -d "$as_dir"; do
-+ as_dirs="$as_dir $as_dirs"
-+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$as_dir" : 'X\(//\)[^/]' \| \
-+ X"$as_dir" : 'X\(//\)$' \| \
-+ X"$as_dir" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$as_dir" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ done
-+ test ! -n "$as_dirs" || mkdir $as_dirs
-+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-+ { (exit 1); exit 1; }; }; }
-
--EOF
-+ rm -f $ac_file
-+ mv $tmp/config.h $ac_file
-+ fi
-+ else
-+ cat $tmp/config.h
-+ rm -f $tmp/config.h
-+ fi
-+done
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-
--cat >> $CONFIG_STATUS <<EOF
--ac_sources="$nls_cv_header_libgt"
--ac_dests="$nls_cv_header_intl"
--EOF
-+#
-+# CONFIG_LINKS section.
-+#
-
--cat >> $CONFIG_STATUS <<\EOF
--srcdir=$ac_given_srcdir
--while test -n "$ac_sources"; do
-- set $ac_dests; ac_dest=$1; shift; ac_dests=$*
-- set $ac_sources; ac_source=$1; shift; ac_sources=$*
-+for ac_file in : $CONFIG_LINKS; do test "x$ac_file" = x: && continue
-+ ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
-+ ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
-
-- echo "linking $srcdir/$ac_source to $ac_dest"
-+ { echo "$as_me:$LINENO: linking $srcdir/$ac_source to $ac_dest" >&5
-+echo "$as_me: linking $srcdir/$ac_source to $ac_dest" >&6;}
-
- if test ! -r $srcdir/$ac_source; then
-- { echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; }
-+ { { echo "$as_me:$LINENO: error: $srcdir/$ac_source: file not found" >&5
-+echo "$as_me: error: $srcdir/$ac_source: file not found" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
- rm -f $ac_dest
-
- # Make relative symlinks.
-- # Remove last slash and all that follows it. Not all systems have dirname.
-- ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'`
-- if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then
-- # The dest file is in a subdirectory.
-- test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir"
-- ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`"
-- # A "../" for each directory in $ac_dest_dir_suffix.
-- ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'`
-+ ac_dest_dir=`(dirname "$ac_dest") 2>/dev/null ||
-+$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$ac_dest" : 'X\(//\)[^/]' \| \
-+ X"$ac_dest" : 'X\(//\)$' \| \
-+ X"$ac_dest" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$ac_dest" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ { if $as_mkdir_p; then
-+ mkdir -p "$ac_dest_dir"
- else
-- ac_dest_dir_suffix= ac_dots=
-- fi
-+ as_dir="$ac_dest_dir"
-+ as_dirs=
-+ while test ! -d "$as_dir"; do
-+ as_dirs="$as_dir $as_dirs"
-+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$as_dir" : 'X\(//\)[^/]' \| \
-+ X"$as_dir" : 'X\(//\)$' \| \
-+ X"$as_dir" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$as_dir" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ done
-+ test ! -n "$as_dirs" || mkdir $as_dirs
-+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dest_dir\"" >&5
-+echo "$as_me: error: cannot create directory \"$ac_dest_dir\"" >&2;}
-+ { (exit 1); exit 1; }; }; }
-+
-+ ac_builddir=.
-+
-+if test "$ac_dest_dir" != .; then
-+ ac_dir_suffix=/`echo "$ac_dest_dir" | sed 's,^\.[\\/],,'`
-+ # A "../" for each directory in $ac_dir_suffix.
-+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-+else
-+ ac_dir_suffix= ac_top_builddir=
-+fi
-+
-+case $srcdir in
-+ .) # No --srcdir option. We are building in place.
-+ ac_srcdir=.
-+ if test -z "$ac_top_builddir"; then
-+ ac_top_srcdir=.
-+ else
-+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-+ fi ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute path.
-+ ac_srcdir=$srcdir$ac_dir_suffix;
-+ ac_top_srcdir=$srcdir ;;
-+ *) # Relative path.
-+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
-+esac
-+
-+# Do not use `cd foo && pwd` to compute absolute paths, because
-+# the directories may not exist.
-+case `pwd` in
-+.) ac_abs_builddir="$ac_dest_dir";;
-+*)
-+ case "$ac_dest_dir" in
-+ .) ac_abs_builddir=`pwd`;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dest_dir";;
-+ *) ac_abs_builddir=`pwd`/"$ac_dest_dir";;
-+ esac;;
-+esac
-+case $ac_abs_builddir in
-+.) ac_abs_top_builddir=${ac_top_builddir}.;;
-+*)
-+ case ${ac_top_builddir}. in
-+ .) ac_abs_top_builddir=$ac_abs_builddir;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-+ esac;;
-+esac
-+case $ac_abs_builddir in
-+.) ac_abs_srcdir=$ac_srcdir;;
-+*)
-+ case $ac_srcdir in
-+ .) ac_abs_srcdir=$ac_abs_builddir;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-+ esac;;
-+esac
-+case $ac_abs_builddir in
-+.) ac_abs_top_srcdir=$ac_top_srcdir;;
-+*)
-+ case $ac_top_srcdir in
-+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-+ esac;;
-+esac
-
-- case "$srcdir" in
-- [/$]*) ac_rel_source="$srcdir/$ac_source" ;;
-- *) ac_rel_source="$ac_dots$srcdir/$ac_source" ;;
-+
-+ case $srcdir in
-+ [\\/$]* | ?:[\\/]* ) ac_rel_source=$srcdir/$ac_source ;;
-+ *) ac_rel_source=$ac_top_builddir$srcdir/$ac_source ;;
- esac
-
-- # Make a symlink if possible; otherwise try a hard link.
-- if ln -s $ac_rel_source $ac_dest 2>/dev/null ||
-- ln $srcdir/$ac_source $ac_dest; then :
-- else
-- { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
-- fi
-+ # Try a symlink, then a hard link, then a copy.
-+ ln -s $ac_rel_source $ac_dest 2>/dev/null ||
-+ ln $srcdir/$ac_source $ac_dest 2>/dev/null ||
-+ cp -p $srcdir/$ac_source $ac_dest ||
-+ { { echo "$as_me:$LINENO: error: cannot link or copy $srcdir/$ac_source to $ac_dest" >&5
-+echo "$as_me: error: cannot link or copy $srcdir/$ac_source to $ac_dest" >&2;}
-+ { (exit 1); exit 1; }; }
- done
--EOF
--cat >> $CONFIG_STATUS <<EOF
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+
-+#
-+# CONFIG_COMMANDS section.
-+#
-+for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
-+ ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
-+ ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
-+ ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
-+$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$ac_dest" : 'X\(//\)[^/]' \| \
-+ X"$ac_dest" : 'X\(//\)$' \| \
-+ X"$ac_dest" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$ac_dest" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ { if $as_mkdir_p; then
-+ mkdir -p "$ac_dir"
-+ else
-+ as_dir="$ac_dir"
-+ as_dirs=
-+ while test ! -d "$as_dir"; do
-+ as_dirs="$as_dir $as_dirs"
-+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$as_dir" : 'X\(//\)[^/]' \| \
-+ X"$as_dir" : 'X\(//\)$' \| \
-+ X"$as_dir" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$as_dir" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ done
-+ test ! -n "$as_dirs" || mkdir $as_dirs
-+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-+ { (exit 1); exit 1; }; }; }
-+
-+ ac_builddir=.
-+
-+if test "$ac_dir" != .; then
-+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-+ # A "../" for each directory in $ac_dir_suffix.
-+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-+else
-+ ac_dir_suffix= ac_top_builddir=
-+fi
-+
-+case $srcdir in
-+ .) # No --srcdir option. We are building in place.
-+ ac_srcdir=.
-+ if test -z "$ac_top_builddir"; then
-+ ac_top_srcdir=.
-+ else
-+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-+ fi ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute path.
-+ ac_srcdir=$srcdir$ac_dir_suffix;
-+ ac_top_srcdir=$srcdir ;;
-+ *) # Relative path.
-+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
-+esac
-
-+# Do not use `cd foo && pwd` to compute absolute paths, because
-+# the directories may not exist.
-+case `pwd` in
-+.) ac_abs_builddir="$ac_dir";;
-+*)
-+ case "$ac_dir" in
-+ .) ac_abs_builddir=`pwd`;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
-+ esac;;
-+esac
-+case $ac_abs_builddir in
-+.) ac_abs_top_builddir=${ac_top_builddir}.;;
-+*)
-+ case ${ac_top_builddir}. in
-+ .) ac_abs_top_builddir=$ac_abs_builddir;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-+ esac;;
-+esac
-+case $ac_abs_builddir in
-+.) ac_abs_srcdir=$ac_srcdir;;
-+*)
-+ case $ac_srcdir in
-+ .) ac_abs_srcdir=$ac_abs_builddir;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-+ esac;;
-+esac
-+case $ac_abs_builddir in
-+.) ac_abs_top_srcdir=$ac_top_srcdir;;
-+*)
-+ case $ac_top_srcdir in
-+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
-+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-+ esac;;
-+esac
-
-
--EOF
--cat >> $CONFIG_STATUS <<\EOF
--test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
--case "$CONFIG_FILES" in *po/Makefile.in*)
-+ { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
-+echo "$as_me: executing $ac_dest commands" >&6;}
-+ case $ac_dest in
-+ default-1 ) test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h ;;
-+ default-2 ) case "$CONFIG_FILES" in *po/Makefile.in*)
- sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
-- esac
--chmod +x gtk-config
--exit 0
--EOF
-+ esac ;;
-+ default ) chmod +x gtk-config ;;
-+ esac
-+done
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+
-+{ (exit 0); exit 0; }
-+_ACEOF
- chmod +x $CONFIG_STATUS
--rm -fr confdefs* $ac_clean_files
--test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-+ac_clean_files=$ac_clean_files_save
-+
-+
-+# configure is writing to config.log, and then calls config.status.
-+# config.status does its own redirection, appending to config.log.
-+# Unfortunately, on DOS this fails, as config.log is still kept open
-+# by configure, so config.status won't be able to write to it; its
-+# output is simply discarded. So we exec the FD to /dev/null,
-+# effectively closing config.log, so it can be properly (re)opened and
-+# appended to by config.status. When coming back to configure, we
-+# need to make the FD available again.
-+if test "$no_create" != yes; then
-+ ac_cs_success=:
-+ ac_config_status_args=
-+ test "$silent" = yes &&
-+ ac_config_status_args="$ac_config_status_args --quiet"
-+ exec 5>/dev/null
-+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-+ exec 5>>config.log
-+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-+ # would make configure fail if this is the last instruction.
-+ $ac_cs_success || { (exit 1); exit 1; }
-+fi
-
-diff -urN gtk+-1.2.10.orig/docs/Makefile.in gtk+-1.2.10/docs/Makefile.in
---- gtk+-1.2.10.orig/docs/Makefile.in 2001-04-01 21:15:08.000000000 -0600
-+++ gtk+-1.2.10/docs/Makefile.in 2006-07-09 02:29:45.000000000 -0600
-@@ -1,6 +1,6 @@
--# Makefile.in generated automatically by automake 1.4 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
--# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
- # gives unlimited permission to copy and/or distribute it,
- # with or without modifications, as long as this notice is preserved.
-@@ -59,13 +59,22 @@
- POST_UNINSTALL = :
- host_alias = @host_alias@
- host_triplet = @host@
-+AR = @AR@
- AS = @AS@
- AWK = @AWK@
- CATALOGS = @CATALOGS@
- CATOBJEXT = @CATOBJEXT@
- CC = @CC@
-+CXX = @CXX@
-+CXXCPP = @CXXCPP@
- DATADIRNAME = @DATADIRNAME@
- DLLTOOL = @DLLTOOL@
-+ECHO = @ECHO@
-+EGREP = @EGREP@
-+EXEEXT = @EXEEXT@
-+F77 = @F77@
-+GCJ = @GCJ@
-+GCJFLAGS = @GCJFLAGS@
- GDK_WLIBS = @GDK_WLIBS@
- GENCAT = @GENCAT@
- GLIB_CFLAGS = @GLIB_CFLAGS@
-@@ -85,14 +94,17 @@
- GTK_XIM_FLAGS = @GTK_XIM_FLAGS@
- GT_NO = @GT_NO@
- GT_YES = @GT_YES@
-+HAVE_LIB = @HAVE_LIB@
- INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
- INDENT = @INDENT@
- INSTOBJEXT = @INSTOBJEXT@
- INTLDEPS = @INTLDEPS@
- INTLLIBS = @INTLLIBS@
- INTLOBJS = @INTLOBJS@
-+LIB = @LIB@
- LIBTOOL = @LIBTOOL@
- LN_S = @LN_S@
-+LTLIB = @LTLIB@
- LT_AGE = @LT_AGE@
- LT_CURRENT = @LT_CURRENT@
- LT_RELEASE = @LT_RELEASE@
-@@ -101,12 +113,16 @@
- MAKEINFO = @MAKEINFO@
- MKINSTALLDIRS = @MKINSTALLDIRS@
- OBJDUMP = @OBJDUMP@
-+OBJEXT = @OBJEXT@
- PACKAGE = @PACKAGE@
- PERL = @PERL@
-+PKG_CONFIG = @PKG_CONFIG@
- POFILES = @POFILES@
- POSUB = @POSUB@
- RANLIB = @RANLIB@
-+RC = @RC@
- REBUILD = @REBUILD@
-+STRIP = @STRIP@
- STRIP_BEGIN = @STRIP_BEGIN@
- STRIP_DUMMY = @STRIP_DUMMY@
- STRIP_END = @STRIP_END@
-@@ -159,15 +175,15 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
- all: all-redirect
- .SUFFIXES:
- .SUFFIXES: .dvi .info .ps .texi .texinfo .txi
- $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps docs/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -257,7 +273,7 @@
- else ii=; fi; \
- list='$(INFO_DEPS)'; \
- for file in $$list; do \
-- test -z "$ii" \
-+ test -z "$$ii" \
- || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
- done
- @$(NORMAL_UNINSTALL)
-@@ -343,6 +359,11 @@
- subdir = docs
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu docs/Makefile
- $(mkinstalldirs) $(distdir)/html $(distdir)/text
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
-diff -urN gtk+-1.2.10.orig/gdk/Makefile.in gtk+-1.2.10/gdk/Makefile.in
---- gtk+-1.2.10.orig/gdk/Makefile.in 2001-04-01 21:14:11.000000000 -0600
-+++ gtk+-1.2.10/gdk/Makefile.in 2006-07-09 02:29:45.000000000 -0600
-@@ -1,6 +1,6 @@
--# Makefile.in generated automatically by automake 1.4 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
--# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
- # gives unlimited permission to copy and/or distribute it,
- # with or without modifications, as long as this notice is preserved.
-@@ -59,13 +59,22 @@
- POST_UNINSTALL = :
- host_alias = @host_alias@
- host_triplet = @host@
-+AR = @AR@
- AS = @AS@
- AWK = @AWK@
- CATALOGS = @CATALOGS@
- CATOBJEXT = @CATOBJEXT@
- CC = @CC@
-+CXX = @CXX@
-+CXXCPP = @CXXCPP@
- DATADIRNAME = @DATADIRNAME@
- DLLTOOL = @DLLTOOL@
-+ECHO = @ECHO@
-+EGREP = @EGREP@
-+EXEEXT = @EXEEXT@
-+F77 = @F77@
-+GCJ = @GCJ@
-+GCJFLAGS = @GCJFLAGS@
- GDK_WLIBS = @GDK_WLIBS@
- GENCAT = @GENCAT@
- GLIB_CFLAGS = @GLIB_CFLAGS@
-@@ -85,14 +94,17 @@
- GTK_XIM_FLAGS = @GTK_XIM_FLAGS@
- GT_NO = @GT_NO@
- GT_YES = @GT_YES@
-+HAVE_LIB = @HAVE_LIB@
- INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
- INDENT = @INDENT@
- INSTOBJEXT = @INSTOBJEXT@
- INTLDEPS = @INTLDEPS@
- INTLLIBS = @INTLLIBS@
- INTLOBJS = @INTLOBJS@
-+LIB = @LIB@
- LIBTOOL = @LIBTOOL@
- LN_S = @LN_S@
-+LTLIB = @LTLIB@
- LT_AGE = @LT_AGE@
- LT_CURRENT = @LT_CURRENT@
- LT_RELEASE = @LT_RELEASE@
-@@ -101,12 +113,16 @@
- MAKEINFO = @MAKEINFO@
- MKINSTALLDIRS = @MKINSTALLDIRS@
- OBJDUMP = @OBJDUMP@
-+OBJEXT = @OBJEXT@
- PACKAGE = @PACKAGE@
- PERL = @PERL@
-+PKG_CONFIG = @PKG_CONFIG@
- POFILES = @POFILES@
- POSUB = @POSUB@
- RANLIB = @RANLIB@
-+RC = @RC@
- REBUILD = @REBUILD@
-+STRIP = @STRIP@
- STRIP_BEGIN = @STRIP_BEGIN@
- STRIP_DUMMY = @STRIP_DUMMY@
- STRIP_END = @STRIP_END@
-@@ -142,9 +158,10 @@
- # setup source file variables
- #
- # GDK header files for public installation (non-generated)
--gdk_public_h_sources = @STRIP_BEGIN@ gdk.h gdkcursors.h gdkrgb.h gdki18n.h gdkkeysyms.h gdkprivate.h gdktypes.h gdkx.h @STRIP_END@
-+gdk_public_h_sources = gdk.h gdkcursors.h gdkrgb.h gdki18n.h gdkkeysyms.h gdkprivate.h gdktypes.h gdkx.h
-
--gdk_c_sources = @STRIP_BEGIN@ gdk.c gdkcc.c gdkcolor.c gdkcursor.c gdkdnd.c gdkdraw.c gdkevents.c gdkfont.c gdkgc.c gdkglobals.c gdkim.c gdkimage.c gdkinput.c gdkinput.h gdkinputnone.h gdkinputcommon.h gdkinputgxi.h gdkinputxfree.h gdkpixmap.c gdkproperty.c gdkrgb.c gdkrectangle.c gdkregion.c gdkselection.c gdkvisual.c gdkwindow.c gdkxid.c MwmUtil.h gxid_lib.h gxid_proto.h gxid_lib.c @STRIP_END@
-+
-+gdk_c_sources = gdk.c gdkcc.c gdkcolor.c gdkcursor.c gdkdnd.c gdkdraw.c gdkevents.c gdkfont.c gdkgc.c gdkglobals.c gdkim.c gdkimage.c gdkinput.c gdkinput.h gdkinputnone.h gdkinputcommon.h gdkinputgxi.h gdkinputxfree.h gdkpixmap.c gdkproperty.c gdkrgb.c gdkrectangle.c gdkregion.c gdkselection.c gdkvisual.c gdkwindow.c gdkxid.c MwmUtil.h gxid_lib.h gxid_proto.h gxid_lib.c
-
-
- #
-@@ -152,9 +169,9 @@
- #
- libgdkinclude_HEADERS = $(gdk_public_h_sources)
- libgdk_la_SOURCES = $(gdk_c_sources)
--MAINTAINERCLEANFILES =
--EXTRA_HEADERS =
--EXTRA_DIST =
-+MAINTAINERCLEANFILES =
-+EXTRA_HEADERS =
-+EXTRA_DIST =
-
- #
- # extra programs
-@@ -185,9 +202,10 @@
- gdkimage.lo gdkinput.lo gdkpixmap.lo gdkproperty.lo gdkrgb.lo \
- gdkrectangle.lo gdkregion.lo gdkselection.lo gdkvisual.lo gdkwindow.lo \
- gdkxid.lo gxid_lib.lo
-+bin_PROGRAMS = @xinput_progs@
- PROGRAMS = $(bin_PROGRAMS)
-
--gxid_OBJECTS = gxid.o
-+gxid_OBJECTS = gxid.$(OBJEXT)
- gxid_DEPENDENCIES =
- gxid_LDFLAGS =
- CFLAGS = @CFLAGS@
-@@ -202,18 +220,25 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
-+DEP_FILES = .deps/gdk.P .deps/gdkcc.P .deps/gdkcolor.P \
-+.deps/gdkcursor.P .deps/gdkdnd.P .deps/gdkdraw.P .deps/gdkevents.P \
-+.deps/gdkfont.P .deps/gdkgc.P .deps/gdkglobals.P .deps/gdkim.P \
-+.deps/gdkimage.P .deps/gdkinput.P .deps/gdkpixmap.P .deps/gdkproperty.P \
-+.deps/gdkrectangle.P .deps/gdkregion.P .deps/gdkrgb.P \
-+.deps/gdkselection.P .deps/gdkvisual.P .deps/gdkwindow.P .deps/gdkxid.P \
-+.deps/gxid.P .deps/gxid_lib.P
- SOURCES = $(libgdk_la_SOURCES) $(gxid_SOURCES)
- OBJECTS = $(libgdk_la_OBJECTS) $(gxid_OBJECTS)
-
- all: all-redirect
- .SUFFIXES:
--.SUFFIXES: .S .c .lo .o .s
-+.SUFFIXES: .S .c .lo .o .obj .s
- $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps gdk/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu gdk/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -243,8 +268,10 @@
- $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
- done
-
--.c.o:
-- $(COMPILE) -c $<
-+# FIXME: We should only use cygpath when building on Windows,
-+# and only if it is available.
-+.c.obj:
-+ $(COMPILE) -c `cygpath -w $<`
-
- .s.o:
- $(COMPILE) -c $<
-@@ -254,6 +281,7 @@
-
- mostlyclean-compile:
- -rm -f *.o core *.core
-+ -rm -f *.$(OBJEXT)
-
- clean-compile:
-
-@@ -262,9 +290,6 @@
-
- maintainer-clean-compile:
-
--.c.lo:
-- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
--
- .s.lo:
- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-@@ -309,8 +334,8 @@
- rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
- done
-
--gxid: $(gxid_OBJECTS) $(gxid_DEPENDENCIES)
-- @rm -f gxid
-+gxid$(EXEEXT): $(gxid_OBJECTS) $(gxid_DEPENDENCIES)
-+ @rm -f gxid$(EXEEXT)
- $(LINK) $(gxid_LDFLAGS) $(gxid_OBJECTS) $(gxid_LDADD) $(LIBS)
-
- install-libgdkincludeHEADERS: $(libgdkinclude_HEADERS)
-@@ -346,7 +371,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -362,6 +387,11 @@
- subdir = gdk
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu gdk/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
-@@ -372,55 +402,38 @@
- || cp -p $$d/$$file $(distdir)/$$file || :; \
- fi; \
- done
--gdk.lo gdk.o : gdk.c ../config.h gdk.h gdktypes.h gdkcursors.h gdkrgb.h \
-- gdkprivate.h gdkinput.h gdkx.h gdkprivate.h gdki18n.h \
-- gdkkeysyms.h
--gdkcc.lo gdkcc.o : gdkcc.c gdk.h gdktypes.h gdkcursors.h gdkrgb.h \
-- gdkprivate.h gdkx.h gdkprivate.h
--gdkcolor.lo gdkcolor.o : gdkcolor.c gdk.h gdktypes.h gdkcursors.h \
-- gdkrgb.h gdkprivate.h gdkx.h gdkprivate.h
--gdkcursor.lo gdkcursor.o : gdkcursor.c gdk.h gdktypes.h gdkcursors.h \
-- gdkrgb.h gdkprivate.h
--gdkdnd.lo gdkdnd.o : gdkdnd.c gdkx.h gdkprivate.h gdktypes.h \
-- gdkcursors.h gdk.h gdkrgb.h
--gdkdraw.lo gdkdraw.o : gdkdraw.c gdk.h gdktypes.h gdkcursors.h gdkrgb.h \
-- gdkprivate.h
--gdkevents.lo gdkevents.o : gdkevents.c gdk.h gdktypes.h gdkcursors.h \
-- gdkrgb.h gdkx.h gdkprivate.h gdkprivate.h gdkkeysyms.h \
-- ../config.h gdkinput.h
--gdkfont.lo gdkfont.o : gdkfont.c gdk.h gdktypes.h gdkcursors.h gdkrgb.h \
-- gdkprivate.h ../config.h
--gdkgc.lo gdkgc.o : gdkgc.c gdk.h gdktypes.h gdkcursors.h gdkrgb.h \
-- gdkprivate.h
--gdkglobals.lo gdkglobals.o : gdkglobals.c gdktypes.h gdkcursors.h \
-- gdkprivate.h gdktypes.h ../config.h
--gdkim.lo gdkim.o : gdkim.c gdk.h gdktypes.h gdkcursors.h gdkrgb.h \
-- gdkprivate.h gdki18n.h gdkx.h gdkprivate.h ../config.h
--gdkimage.lo gdkimage.o : gdkimage.c ../config.h gdk.h gdktypes.h \
-- gdkcursors.h gdkrgb.h gdkprivate.h
--gdkinput.lo gdkinput.o : gdkinput.c ../config.h gdk.h gdktypes.h \
-- gdkcursors.h gdkrgb.h gdkx.h gdkprivate.h gdkprivate.h \
-- gdkinput.h gdkinputnone.h gdkinputcommon.h gdkinputxfree.h \
-- gdkinputgxi.h
--gdkpixmap.lo gdkpixmap.o : gdkpixmap.c ../config.h gdk.h gdktypes.h \
-- gdkcursors.h gdkrgb.h gdkprivate.h
--gdkproperty.lo gdkproperty.o : gdkproperty.c gdk.h gdktypes.h \
-- gdkcursors.h gdkrgb.h gdkprivate.h
--gdkrectangle.lo gdkrectangle.o : gdkrectangle.c gdk.h gdktypes.h \
-- gdkcursors.h gdkrgb.h
--gdkregion.lo gdkregion.o : gdkregion.c gdk.h gdktypes.h gdkcursors.h \
-- gdkrgb.h gdkprivate.h
--gdkrgb.lo gdkrgb.o : gdkrgb.c ../config.h gdk.h gdktypes.h gdkcursors.h \
-- gdkrgb.h gdkprivate.h gdkrgb.h
--gdkselection.lo gdkselection.o : gdkselection.c gdk.h gdktypes.h \
-- gdkcursors.h gdkrgb.h gdkprivate.h gdkx.h gdkprivate.h
--gdkvisual.lo gdkvisual.o : gdkvisual.c gdk.h gdktypes.h gdkcursors.h \
-- gdkrgb.h gdkprivate.h gdkx.h gdkprivate.h
--gdkwindow.lo gdkwindow.o : gdkwindow.c gdk.h gdktypes.h gdkcursors.h \
-- gdkrgb.h ../config.h gdkinput.h gdkprivate.h MwmUtil.h
--gdkxid.lo gdkxid.o : gdkxid.c gdkprivate.h gdktypes.h gdkcursors.h
--gxid_lib.lo gxid_lib.o : gxid_lib.c ../config.h gxid_lib.h gxid_proto.h
-
-+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-+
-+-include $(DEP_FILES)
-+
-+mostlyclean-depend:
-+
-+clean-depend:
-+
-+distclean-depend:
-+ -rm -rf .deps
-+
-+maintainer-clean-depend:
-+
-+%.o: %.c
-+ @echo '$(COMPILE) -c $<'; \
-+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm .deps/$(*F).pp
-+
-+%.lo: %.c
-+ @echo '$(LTCOMPILE) -c $<'; \
-+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
-+ < .deps/$(*F).pp > .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm -f .deps/$(*F).pp
- info-am:
- info: info-am
- dvi-am:
-@@ -462,19 +475,19 @@
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
- mostlyclean-am: mostlyclean-libLTLIBRARIES mostlyclean-compile \
- mostlyclean-libtool mostlyclean-binPROGRAMS \
-- mostlyclean-tags mostlyclean-generic
-+ mostlyclean-tags mostlyclean-depend mostlyclean-generic
-
- mostlyclean: mostlyclean-am
-
- clean-am: clean-libLTLIBRARIES clean-compile clean-libtool \
-- clean-binPROGRAMS clean-tags clean-generic \
-+ clean-binPROGRAMS clean-tags clean-depend clean-generic \
- mostlyclean-am
-
- clean: clean-am
-
- distclean-am: distclean-libLTLIBRARIES distclean-compile \
- distclean-libtool distclean-binPROGRAMS distclean-tags \
-- distclean-generic clean-am
-+ distclean-depend distclean-generic clean-am
- -rm -f libtool
-
- distclean: distclean-am
-@@ -482,7 +495,8 @@
- maintainer-clean-am: maintainer-clean-libLTLIBRARIES \
- maintainer-clean-compile maintainer-clean-libtool \
- maintainer-clean-binPROGRAMS maintainer-clean-tags \
-- maintainer-clean-generic distclean-am
-+ maintainer-clean-depend maintainer-clean-generic \
-+ distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-@@ -497,12 +511,13 @@
- clean-binPROGRAMS maintainer-clean-binPROGRAMS uninstall-binPROGRAMS \
- install-binPROGRAMS uninstall-libgdkincludeHEADERS \
- install-libgdkincludeHEADERS tags mostlyclean-tags distclean-tags \
--clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
--check-am installcheck-am installcheck install-exec-am install-exec \
--install-data-am install-data install-am install uninstall-am uninstall \
--all-redirect all-am all installdirs mostlyclean-generic \
--distclean-generic clean-generic maintainer-clean-generic clean \
--mostlyclean distclean maintainer-clean
-+clean-tags maintainer-clean-tags distdir mostlyclean-depend \
-+distclean-depend clean-depend maintainer-clean-depend info-am info \
-+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
-+install-exec install-data-am install-data install-am install \
-+uninstall-am uninstall all-redirect all-am all installdirs \
-+mostlyclean-generic distclean-generic clean-generic \
-+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
- #
-diff -urN gtk+-1.2.10.orig/gtk/Makefile.in gtk+-1.2.10/gtk/Makefile.in
---- gtk+-1.2.10.orig/gtk/Makefile.in 2001-04-01 21:14:13.000000000 -0600
-+++ gtk+-1.2.10/gtk/Makefile.in 2006-07-09 02:29:45.000000000 -0600
-@@ -1,6 +1,6 @@
--# Makefile.in generated automatically by automake 1.4 from Makefile.am
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-
--# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
- # gives unlimited permission to copy and/or distribute it,
- # with or without modifications, as long as this notice is preserved.
-@@ -59,13 +59,22 @@
- POST_UNINSTALL = :
- host_alias = @host_alias@
- host_triplet = @host@
-+AR = @AR@
- AS = @AS@
- AWK = @AWK@
- CATALOGS = @CATALOGS@
- CATOBJEXT = @CATOBJEXT@
- CC = @CC@
-+CXX = @CXX@
-+CXXCPP = @CXXCPP@
- DATADIRNAME = @DATADIRNAME@
- DLLTOOL = @DLLTOOL@
-+ECHO = @ECHO@
-+EGREP = @EGREP@
-+EXEEXT = @EXEEXT@
-+F77 = @F77@
-+GCJ = @GCJ@
-+GCJFLAGS = @GCJFLAGS@
- GDK_WLIBS = @GDK_WLIBS@
- GENCAT = @GENCAT@
- GLIB_CFLAGS = @GLIB_CFLAGS@
-@@ -85,14 +94,17 @@
- GTK_XIM_FLAGS = @GTK_XIM_FLAGS@
- GT_NO = @GT_NO@
- GT_YES = @GT_YES@
-+HAVE_LIB = @HAVE_LIB@
- INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
- INDENT = @INDENT@
- INSTOBJEXT = @INSTOBJEXT@
- INTLDEPS = @INTLDEPS@
- INTLLIBS = @INTLLIBS@
- INTLOBJS = @INTLOBJS@
-+LIB = @LIB@
- LIBTOOL = @LIBTOOL@
- LN_S = @LN_S@
-+LTLIB = @LTLIB@
- LT_AGE = @LT_AGE@
- LT_CURRENT = @LT_CURRENT@
- LT_RELEASE = @LT_RELEASE@
-@@ -101,12 +113,16 @@
- MAKEINFO = @MAKEINFO@
- MKINSTALLDIRS = @MKINSTALLDIRS@
- OBJDUMP = @OBJDUMP@
-+OBJEXT = @OBJEXT@
- PACKAGE = @PACKAGE@
- PERL = @PERL@
-+PKG_CONFIG = @PKG_CONFIG@
- POFILES = @POFILES@
- POSUB = @POSUB@
- RANLIB = @RANLIB@
-+RC = @RC@
- REBUILD = @REBUILD@
-+STRIP = @STRIP@
- STRIP_BEGIN = @STRIP_BEGIN@
- STRIP_DUMMY = @STRIP_DUMMY@
- STRIP_END = @STRIP_END@
-@@ -143,13 +159,15 @@
- # setup source file variables
- #
- # GTK+ header files for public installation (non-generated)
--gtk_public_h_sources = @STRIP_BEGIN@ gtk.h gtkaccelgroup.h gtkaccellabel.h gtkadjustment.h gtkalignment.h gtkarg.h gtkarrow.h gtkaspectframe.h gtkbin.h gtkbindings.h gtkbbox.h gtkbox.h gtkbutton.h gtkcalendar.h gtkcheckbutton.h gtkcheckmenuitem.h gtkclist.h gtkcolorsel.h gtkcombo.h gtkcompat.h gtkcontainer.h gtkctree.h gtkcurve.h gtkdata.h gtkdebug.h gtkdialog.h gtkdnd.h gtkdrawingarea.h gtkeditable.h gtkentry.h gtkenums.h gtkeventbox.h gtkfilesel.h gtkfixed.h gtkfontsel.h gtkframe.h gtkgamma.h gtkgc.h gtkhandlebox.h gtkhbbox.h gtkhbox.h gtkhpaned.h gtkhruler.h gtkhscale.h gtkhscrollbar.h gtkhseparator.h gtkimage.h gtkinputdialog.h gtkinvisible.h gtkitem.h gtkitemfactory.h gtklabel.h gtklayout.h gtklist.h gtklistitem.h gtkmain.h gtkmenu.h gtkmenubar.h gtkmenufactory.h gtkmenuitem.h gtkmenushell.h gtkmisc.h gtknotebook.h gt
kobject.h gtkoptionmenu.h gtkpacker.h gtkpaned.h gtkpixmap.h gtkplug.h gtkpreview.h gtkprivate.h gtkprogress.h gtkprogressbar.h gtkradiobutton.h gtkradiomenuitem.h gtkrange.h gtkrc.h gtkruler.h gtkscale.h gtkscrollbar.h gtkscrolledwindow.h gtkselection.h gtkseparator.h gtksignal.h gtksocket.h gtkspinbutton.h gtkstyle.h gtkstatusbar.h gtktable.h gtktearoffmenuitem.h gtktext.h gtkthemes.h gtktipsquery.h gtktogglebutton.h gtktoolbar.h gtktooltips.h gtktree.h gtktreeitem.h gtktypeutils.h gtkvbbox.h gtkvbox.h gtkviewport.h gtkvpaned.h gtkvruler.h gtkvscale.h gtkvscrollbar.h gtkvseparator.h gtkwidget.h gtkwindow.h @STRIP_END@
-+gtk_public_h_sources = gtk.h gtkaccelgroup.h gtkaccellabel.h gtkadjustment.h gtkalignment.h gtkarg.h gtkarrow.h gtkaspectframe.h gtkbin.h gtkbindings.h gtkbbox.h gtkbox.h gtkbutton.h gtkcalendar.h gtkcheckbutton.h gtkcheckmenuitem.h gtkclist.h gtkcolorsel.h gtkcombo.h gtkcompat.h gtkcontainer.h gtkctree.h gtkcurve.h gtkdata.h gtkdebug.h gtkdialog.h gtkdnd.h gtkdrawingarea.h gtkeditable.h gtkentry.h gtkenums.h gtkeventbox.h gtkfilesel.h gtkfixed.h gtkfontsel.h gtkframe.h gtkgamma.h gtkgc.h gtkhandlebox.h gtkhbbox.h gtkhbox.h gtkhpaned.h gtkhruler.h gtkhscale.h gtkhscrollbar.h gtkhseparator.h gtkimage.h gtkinputdialog.h gtkinvisible.h gtkitem.h gtkitemfactory.h gtklabel.h gtklayout.h gtklist.h gtklistitem.h gtkmain.h gtkmenu.h gtkmenubar.h gtkmenufactory.h gtkmenuitem.h gtkmenushell.h gtkmisc.h gtknotebook.h gtkobject.h g
tkoptionmenu.h gtkpacker.h gtkpaned.h gtkpixmap.h gtkplug.h gtkpreview.h gtkprivate.h gtkprogress.h gtkprogressbar.h gtkradiobutton.h gtkradiomenuitem.h gtkrange.h gtkrc.h gtkruler.h gtkscale.h gtkscrollbar.h gtkscrolledwindow.h gtkselection.h gtkseparator.h gtksignal.h gtksocket.h gtkspinbutton.h gtkstyle.h gtkstatusbar.h gtktable.h gtktearoffmenuitem.h gtktext.h gtkthemes.h gtktipsquery.h gtktogglebutton.h gtktoolbar.h gtktooltips.h gtktree.h gtktreeitem.h gtktypeutils.h gtkvbbox.h gtkvbox.h gtkviewport.h gtkvpaned.h gtkvruler.h gtkvscale.h gtkvscrollbar.h gtkvseparator.h gtkwidget.h gtkwindow.h
-+
-
- # GTK+ header files that don't get installed
--gtk_private_h_sources = @STRIP_BEGIN@ @STRIP_END@
-+gtk_private_h_sources =
-
- # GTK+ C sources to build the library from
--gtk_c_sources = @STRIP_BEGIN@ gtkaccelgroup.c gtkaccellabel.c gtkadjustment.c gtkalignment.c gtkarg.c gtkarrow.c gtkaspectframe.c gtkbin.c gtkbindings.c gtkbbox.c gtkbox.c gtkbutton.c gtkcalendar.c gtkcheckbutton.c gtkcheckmenuitem.c gtkclist.c gtkcolorsel.c gtkcombo.c gtkcontainer.c gtkctree.c gtkcurve.c gtkdata.c gtkdialog.c gtkdnd.c gtkdrawingarea.c gtkeditable.c gtkentry.c gtkeventbox.c gtkfilesel.c gtkfixed.c gtkfontsel.c gtkframe.c gtkgamma.c gtkgc.c gtkhandlebox.c gtkhbbox.c gtkhbox.c gtkhpaned.c gtkhruler.c gtkhscale.c gtkhscrollbar.c gtkhseparator.c gtkimage.c gtkinputdialog.c gtkintl.h gtkinvisible.c gtkitem.c gtkitemfactory.c gtklabel.c gtklayout.c gtklist.c gtklistitem.c gtkmain.c gtkmarshal.c gtkmenu.c gtkmenubar.c gtkmenufactory.c gtkmenuitem.c gtkmenushell.c gtkmisc.c gtknotebook.c gtkobject.c gtkoptionmenu.c gtkpacker.c
gtkpaned.c gtkpixmap.c gtkplug.c gtkpreview.c gtkprogress.c gtkprogressbar.c gtkradiobutton.c gtkradiomenuitem.c gtkrange.c gtkrc.c gtkruler.c gtkscale.c gtkscrollbar.c gtkscrolledwindow.c gtkselection.c gtkseparator.c gtksignal.c gtksocket.c gtkspinbutton.c gtkstyle.c gtkstatusbar.c gtktable.c gtktearoffmenuitem.c gtktext.c gtkthemes.c gtktipsquery.c gtktogglebutton.c gtktoolbar.c gtktooltips.c gtktree.c gtktreeitem.c gtktypeutils.c gtkvbbox.c gtkvbox.c gtkviewport.c gtkvpaned.c gtkvruler.c gtkvscale.c gtkvscrollbar.c gtkvseparator.c gtkwidget.c gtkwindow.c fnmatch.c fnmatch.h @STRIP_END@
-+gtk_c_sources = gtkaccelgroup.c gtkaccellabel.c gtkadjustment.c gtkalignment.c gtkarg.c gtkarrow.c gtkaspectframe.c gtkbin.c gtkbindings.c gtkbbox.c gtkbox.c gtkbutton.c gtkcalendar.c gtkcheckbutton.c gtkcheckmenuitem.c gtkclist.c gtkcolorsel.c gtkcombo.c gtkcontainer.c gtkctree.c gtkcurve.c gtkdata.c gtkdialog.c gtkdnd.c gtkdrawingarea.c gtkeditable.c gtkentry.c gtkeventbox.c gtkfilesel.c gtkfixed.c gtkfontsel.c gtkframe.c gtkgamma.c gtkgc.c gtkhandlebox.c gtkhbbox.c gtkhbox.c gtkhpaned.c gtkhruler.c gtkhscale.c gtkhscrollbar.c gtkhseparator.c gtkimage.c gtkinputdialog.c gtkintl.h gtkinvisible.c gtkitem.c gtkitemfactory.c gtklabel.c gtklayout.c gtklist.c gtklistitem.c gtkmain.c gtkmarshal.c gtkmenu.c gtkmenubar.c gtkmenufactory.c gtkmenuitem.c gtkmenushell.c gtkmisc.c gtknotebook.c gtkobject.c gtkoptionmenu.c gtkpacker.c gtkpaned.c
gtkpixmap.c gtkplug.c gtkpreview.c gtkprogress.c gtkprogressbar.c gtkradiobutton.c gtkradiomenuitem.c gtkrange.c gtkrc.c gtkruler.c gtkscale.c gtkscrollbar.c gtkscrolledwindow.c gtkselection.c gtkseparator.c gtksignal.c gtksocket.c gtkspinbutton.c gtkstyle.c gtkstatusbar.c gtktable.c gtktearoffmenuitem.c gtktext.c gtkthemes.c gtktipsquery.c gtktogglebutton.c gtktoolbar.c gtktooltips.c gtktree.c gtktreeitem.c gtktypeutils.c gtkvbbox.c gtkvbox.c gtkviewport.c gtkvpaned.c gtkvruler.c gtkvscale.c gtkvscrollbar.c gtkvseparator.c gtkwidget.c gtkwindow.c fnmatch.c fnmatch.h
-+
-
- # we use our own built_sources variable rules to avoid automake's
- # BUILT_SOURCES oddities
-@@ -158,15 +176,18 @@
- # content
- #
- # built sources that don't get installed
--gtk_built_sources = @STRIP_BEGIN@ stamp-gtk.defs stamp-gtktypebuiltins.h stamp-gtkmarshal.h gtktypebuiltins_vars.c gtktypebuiltins_ids.c gtktypebuiltins_evals.c gtkmarshal.c gtk.defs @STRIP_END@
-+gtk_built_sources = stamp-gtk.defs stamp-gtktypebuiltins.h stamp-gtkmarshal.h gtktypebuiltins_vars.c gtktypebuiltins_ids.c gtktypebuiltins_evals.c gtkmarshal.c gtk.defs
-+
-
- # built sources that get installed with the header files
--gtk_built_public_sources = @STRIP_BEGIN@ gtkmarshal.h gtktypebuiltins.h @STRIP_END@
-+gtk_built_public_sources = gtkmarshal.h gtktypebuiltins.h
-+
-
- # non-header sources (headers should be specified in the above variables)
- # that don't serve as direct make target sources, i.e. they don't have
- # their own .lo rules and don't get publically installed
--gtk_extra_sources = @STRIP_BEGIN@ gtkfeatures.h.in makeenums.pl makeenums.awk maketypes.awk makeenums.h gtkargcollector.c gtk-boxed.defs genmarshal.pl gtkmarshal.list @STRIP_END@
-+gtk_extra_sources = gtkfeatures.h.in makeenums.pl makeenums.awk maketypes.awk makeenums.h gtkargcollector.c gtk-boxed.defs genmarshal.pl gtkmarshal.list
-+
-
- # Extra headers that are used for enum type array/id generation
- gdk_headers = @STRIP_BEGIN@ ../gdk/gdktypes.h ../gdk/gdkrgb.h @STRIP_END@
-@@ -177,10 +198,10 @@
- #
- libgtkinclude_HEADERS = $(gtk_public_h_sources) $(gtk_built_public_sources) gtkfeatures.h
- libgtk_la_SOURCES = $(gtk_c_sources)
--MAINTAINERCLEANFILES = $(gtk_built_public_sources) $(gtk_built_sources)
--EXTRA_HEADERS =
-+MAINTAINERCLEANFILES = $(gtk_built_public_sources) $(gtk_built_sources)
-+EXTRA_HEADERS =
-
--EXTRA_DIST = $(gtk_private_h_sources) $(gtk_built_sources) $(gtk_built_public_sources) $(gtk_extra_sources) @STRIP_BEGIN@ testgtk.1 testgtkrc testgtkrc2 circles.xbm line-arrow.xbm line-wrap.xbm tree_plus.xbm tree_minus.xbm 3DRings.xpm FilesQueue.xpm Modeller.xpm check-y.xpm check-n.xpm marble.xpm tree_minus.xpm tree_plus.xpm test.xpm check-y.xpm check-n.xpm test.xpm $(gtkconf_DATA) @STRIP_END@
-+EXTRA_DIST = $(gtk_private_h_sources) $(gtk_built_sources) $(gtk_built_public_sources) $(gtk_extra_sources) @STRIP_BEGIN@ testgtk.1 testgtkrc testgtkrc2 circles.xbm line-arrow.xbm line-wrap.xbm tree_plus.xbm tree_minus.xbm 3DRings.xpm FilesQueue.xpm Modeller.xpm check-y.xpm check-n.xpm marble.xpm tree_minus.xpm tree_plus.xpm test.xpm check-y.xpm check-n.xpm test.xpm $(gtkconf_DATA) @STRIP_END@
-
-
- #
-@@ -188,7 +209,7 @@
- #
- # setup autogeneration dependancies
- gen_sources = xgen-gdef xgen-gtbh xgen-gtbvc xgen-gtbic xgen-gtbec xgen-gmh xgen-gmc
--CLEANFILES = $(gen_sources)
-+CLEANFILES = $(gen_sources)
-
- gtkconfdir = $(sysconfdir)/gtk
- gtkconf_DATA = gtkrc.az gtkrc.el gtkrc.eo gtkrc.he gtkrc.hy gtkrc.ja gtkrc.ko gtkrc.ru gtkrc.tr gtkrc.th gtkrc.uk gtkrc.iso-8859-2 gtkrc.iso-8859-5 gtkrc.iso-8859-13 gtkrc.iso-8859-14 gtkrc.iso-8859-15 gtkrc.zh_CN gtkrc.zh_TW.big5 gtkrc.ka_GE.georgianacademy gtkrc.ka_GE.georgianps gtkrc.vi_VN.tcvn gtkrc.vi_VN.viscii gtkrc.cp1251 gtkrc.cp1255
-@@ -252,25 +273,28 @@
- gtktooltips.lo gtktree.lo gtktreeitem.lo gtktypeutils.lo gtkvbbox.lo \
- gtkvbox.lo gtkviewport.lo gtkvpaned.lo gtkvruler.lo gtkvscale.lo \
- gtkvscrollbar.lo gtkvseparator.lo gtkwidget.lo gtkwindow.lo fnmatch.lo
-+noinst_PROGRAMS = testgtk$(EXEEXT) testinput$(EXEEXT) \
-+testselection$(EXEEXT) testrgb$(EXEEXT) testdnd$(EXEEXT) \
-+simple$(EXEEXT)
- PROGRAMS = $(noinst_PROGRAMS)
-
- testgtk_SOURCES = testgtk.c
--testgtk_OBJECTS = testgtk.o
-+testgtk_OBJECTS = testgtk.$(OBJEXT)
- testgtk_LDFLAGS =
- testinput_SOURCES = testinput.c
--testinput_OBJECTS = testinput.o
-+testinput_OBJECTS = testinput.$(OBJEXT)
- testinput_LDFLAGS =
- testselection_SOURCES = testselection.c
--testselection_OBJECTS = testselection.o
-+testselection_OBJECTS = testselection.$(OBJEXT)
- testselection_LDFLAGS =
- testrgb_SOURCES = testrgb.c
--testrgb_OBJECTS = testrgb.o
-+testrgb_OBJECTS = testrgb.$(OBJEXT)
- testrgb_LDFLAGS =
- testdnd_SOURCES = testdnd.c
--testdnd_OBJECTS = testdnd.o
-+testdnd_OBJECTS = testdnd.$(OBJEXT)
- testdnd_LDFLAGS =
- simple_SOURCES = simple.c
--simple_OBJECTS = simple.o
-+simple_OBJECTS = simple.$(OBJEXT)
- simple_LDFLAGS =
- CFLAGS = @CFLAGS@
- COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-@@ -286,18 +310,52 @@
-
- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
--TAR = gtar
-+TAR = tar
- GZIP_ENV = --best
-+DEP_FILES = .deps/fnmatch.P .deps/gtkaccelgroup.P .deps/gtkaccellabel.P \
-+.deps/gtkadjustment.P .deps/gtkalignment.P .deps/gtkarg.P \
-+.deps/gtkarrow.P .deps/gtkaspectframe.P .deps/gtkbbox.P .deps/gtkbin.P \
-+.deps/gtkbindings.P .deps/gtkbox.P .deps/gtkbutton.P \
-+.deps/gtkcalendar.P .deps/gtkcheckbutton.P .deps/gtkcheckmenuitem.P \
-+.deps/gtkclist.P .deps/gtkcolorsel.P .deps/gtkcombo.P \
-+.deps/gtkcontainer.P .deps/gtkctree.P .deps/gtkcurve.P .deps/gtkdata.P \
-+.deps/gtkdialog.P .deps/gtkdnd.P .deps/gtkdrawingarea.P \
-+.deps/gtkeditable.P .deps/gtkentry.P .deps/gtkeventbox.P \
-+.deps/gtkfilesel.P .deps/gtkfixed.P .deps/gtkfontsel.P .deps/gtkframe.P \
-+.deps/gtkgamma.P .deps/gtkgc.P .deps/gtkhandlebox.P .deps/gtkhbbox.P \
-+.deps/gtkhbox.P .deps/gtkhpaned.P .deps/gtkhruler.P .deps/gtkhscale.P \
-+.deps/gtkhscrollbar.P .deps/gtkhseparator.P .deps/gtkimage.P \
-+.deps/gtkinputdialog.P .deps/gtkinvisible.P .deps/gtkitem.P \
-+.deps/gtkitemfactory.P .deps/gtklabel.P .deps/gtklayout.P \
-+.deps/gtklist.P .deps/gtklistitem.P .deps/gtkmain.P .deps/gtkmarshal.P \
-+.deps/gtkmenu.P .deps/gtkmenubar.P .deps/gtkmenufactory.P \
-+.deps/gtkmenuitem.P .deps/gtkmenushell.P .deps/gtkmisc.P \
-+.deps/gtknotebook.P .deps/gtkobject.P .deps/gtkoptionmenu.P \
-+.deps/gtkpacker.P .deps/gtkpaned.P .deps/gtkpixmap.P .deps/gtkplug.P \
-+.deps/gtkpreview.P .deps/gtkprogress.P .deps/gtkprogressbar.P \
-+.deps/gtkradiobutton.P .deps/gtkradiomenuitem.P .deps/gtkrange.P \
-+.deps/gtkrc.P .deps/gtkruler.P .deps/gtkscale.P .deps/gtkscrollbar.P \
-+.deps/gtkscrolledwindow.P .deps/gtkselection.P .deps/gtkseparator.P \
-+.deps/gtksignal.P .deps/gtksocket.P .deps/gtkspinbutton.P \
-+.deps/gtkstatusbar.P .deps/gtkstyle.P .deps/gtktable.P \
-+.deps/gtktearoffmenuitem.P .deps/gtktext.P .deps/gtkthemes.P \
-+.deps/gtktipsquery.P .deps/gtktogglebutton.P .deps/gtktoolbar.P \
-+.deps/gtktooltips.P .deps/gtktree.P .deps/gtktreeitem.P \
-+.deps/gtktypeutils.P .deps/gtkvbbox.P .deps/gtkvbox.P \
-+.deps/gtkviewport.P .deps/gtkvpaned.P .deps/gtkvruler.P \
-+.deps/gtkvscale.P .deps/gtkvscrollbar.P .deps/gtkvseparator.P \
-+.deps/gtkwidget.P .deps/gtkwindow.P .deps/simple.P .deps/testdnd.P \
-+.deps/testgtk.P .deps/testinput.P .deps/testrgb.P .deps/testselection.P
- SOURCES = $(libgtk_la_SOURCES) testgtk.c testinput.c testselection.c testrgb.c testdnd.c simple.c
--OBJECTS = $(libgtk_la_OBJECTS) testgtk.o testinput.o testselection.o testrgb.o testdnd.o simple.o
-+OBJECTS = $(libgtk_la_OBJECTS) testgtk.$(OBJEXT) testinput.$(OBJEXT) testselection.$(OBJEXT) testrgb.$(OBJEXT) testdnd.$(OBJEXT) simple.$(OBJEXT)
-
- all: all-redirect
- .SUFFIXES:
--.SUFFIXES: .S .c .lo .o .s
-+.SUFFIXES: .S .c .lo .o .obj .s
- $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps gtk/Makefile
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu gtk/Makefile
-
--Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-@@ -329,8 +387,10 @@
- $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
- done
-
--.c.o:
-- $(COMPILE) -c $<
-+# FIXME: We should only use cygpath when building on Windows,
-+# and only if it is available.
-+.c.obj:
-+ $(COMPILE) -c `cygpath -w $<`
-
- .s.o:
- $(COMPILE) -c $<
-@@ -340,6 +400,7 @@
-
- mostlyclean-compile:
- -rm -f *.o core *.core
-+ -rm -f *.$(OBJEXT)
-
- clean-compile:
-
-@@ -348,9 +409,6 @@
-
- maintainer-clean-compile:
-
--.c.lo:
-- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
--
- .s.lo:
- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-@@ -379,28 +437,28 @@
-
- maintainer-clean-noinstPROGRAMS:
-
--testgtk: $(testgtk_OBJECTS) $(testgtk_DEPENDENCIES)
-- @rm -f testgtk
-+testgtk$(EXEEXT): $(testgtk_OBJECTS) $(testgtk_DEPENDENCIES)
-+ @rm -f testgtk$(EXEEXT)
- $(LINK) $(testgtk_LDFLAGS) $(testgtk_OBJECTS) $(testgtk_LDADD) $(LIBS)
-
--testinput: $(testinput_OBJECTS) $(testinput_DEPENDENCIES)
-- @rm -f testinput
-+testinput$(EXEEXT): $(testinput_OBJECTS) $(testinput_DEPENDENCIES)
-+ @rm -f testinput$(EXEEXT)
- $(LINK) $(testinput_LDFLAGS) $(testinput_OBJECTS) $(testinput_LDADD) $(LIBS)
-
--testselection: $(testselection_OBJECTS) $(testselection_DEPENDENCIES)
-- @rm -f testselection
-+testselection$(EXEEXT): $(testselection_OBJECTS) $(testselection_DEPENDENCIES)
-+ @rm -f testselection$(EXEEXT)
- $(LINK) $(testselection_LDFLAGS) $(testselection_OBJECTS) $(testselection_LDADD) $(LIBS)
-
--testrgb: $(testrgb_OBJECTS) $(testrgb_DEPENDENCIES)
-- @rm -f testrgb
-+testrgb$(EXEEXT): $(testrgb_OBJECTS) $(testrgb_DEPENDENCIES)
-+ @rm -f testrgb$(EXEEXT)
- $(LINK) $(testrgb_LDFLAGS) $(testrgb_OBJECTS) $(testrgb_LDADD) $(LIBS)
-
--testdnd: $(testdnd_OBJECTS) $(testdnd_DEPENDENCIES)
-- @rm -f testdnd
-+testdnd$(EXEEXT): $(testdnd_OBJECTS) $(testdnd_DEPENDENCIES)
-+ @rm -f testdnd$(EXEEXT)
- $(LINK) $(testdnd_LDFLAGS) $(testdnd_OBJECTS) $(testdnd_LDADD) $(LIBS)
-
--simple: $(simple_OBJECTS) $(simple_DEPENDENCIES)
-- @rm -f simple
-+simple$(EXEEXT): $(simple_OBJECTS) $(simple_DEPENDENCIES)
-+ @rm -f simple$(EXEEXT)
- $(LINK) $(simple_LDFLAGS) $(simple_OBJECTS) $(simple_LDADD) $(LIBS)
-
- install-gtkconfDATA: $(gtkconf_DATA)
-@@ -455,7 +513,7 @@
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-
- mostlyclean-tags:
-
-@@ -471,6 +529,11 @@
- subdir = gtk
-
- distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu gtk/Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
-@@ -481,866 +544,38 @@
- || cp -p $$d/$$file $(distdir)/$$file || :; \
- fi; \
- done
--fnmatch.lo fnmatch.o : fnmatch.c ../config.h fnmatch.h
--gtkaccelgroup.lo gtkaccelgroup.o : gtkaccelgroup.c gtkaccelgroup.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkenums.h gtkdebug.h ../gdk/gdkkeysyms.h \
-- gtksignal.h gtkmarshal.h gtkwidget.h gtkaccelgroup.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h
--gtkaccellabel.lo gtkaccellabel.o : gtkaccellabel.c gtkmain.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkwidget.h gtkaccelgroup.h gtkobject.h \
-- gtkarg.h gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h gtksignal.h gtkmarshal.h \
-- gtkaccellabel.h gtklabel.h gtkmisc.h
--gtkadjustment.lo gtkadjustment.o : gtkadjustment.c gtkadjustment.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkdata.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkenums.h gtkdebug.h gtksignal.h \
-- gtkmarshal.h
--gtkalignment.lo gtkalignment.o : gtkalignment.c gtkalignment.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkbin.h gtkcontainer.h gtkenums.h gtkwidget.h \
-- gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkdebug.h gtkadjustment.h gtkdata.h \
-- gtkstyle.h
--gtkarg.lo gtkarg.o : gtkarg.c gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkenums.h gtkdebug.h gtkargcollector.c
--gtkarrow.lo gtkarrow.o : gtkarrow.c gtkarrow.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkmisc.h \
-- gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkenums.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h
--gtkaspectframe.lo gtkaspectframe.o : gtkaspectframe.c gtkaspectframe.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkbin.h gtkcontainer.h gtkenums.h gtkwidget.h \
-- gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkdebug.h gtkadjustment.h gtkdata.h \
-- gtkstyle.h gtkframe.h
--gtkbbox.lo gtkbbox.o : gtkbbox.c gtkbbox.h gtkbox.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h
--gtkbin.lo gtkbin.o : gtkbin.c gtkbin.h ../gdk/gdk.h ../gdk/gdktypes.h \
-- ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkcontainer.h gtkenums.h \
-- gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkdebug.h gtkadjustment.h gtkdata.h \
-- gtkstyle.h
--gtkbindings.lo gtkbindings.o : gtkbindings.c gtkbindings.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkenums.h gtkdebug.h gtksignal.h gtkmarshal.h gtkwidget.h \
-- gtkaccelgroup.h gtkadjustment.h gtkdata.h gtkstyle.h gtkrc.h \
-- gtkwidget.h
--gtkbox.lo gtkbox.o : gtkbox.c gtkbox.h ../gdk/gdk.h ../gdk/gdktypes.h \
-- ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkcontainer.h gtkenums.h \
-- gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkdebug.h gtkadjustment.h gtkdata.h \
-- gtkstyle.h
--gtkbutton.lo gtkbutton.o : gtkbutton.c gtkbutton.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkbin.h \
-- gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h gtklabel.h \
-- gtkmisc.h gtkmain.h gtksignal.h gtkmarshal.h
--gtkcalendar.lo gtkcalendar.o : gtkcalendar.c gtkcalendar.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtksignal.h gtkenums.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkdebug.h gtkmarshal.h gtkwidget.h \
-- gtkaccelgroup.h gtkadjustment.h gtkdata.h gtkstyle.h \
-- ../gdk/gdkkeysyms.h
--gtkcheckbutton.lo gtkcheckbutton.o : gtkcheckbutton.c gtkcheckbutton.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtktogglebutton.h gtkbutton.h gtkbin.h \
-- gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h gtklabel.h \
-- gtkmisc.h
--gtkcheckmenuitem.lo gtkcheckmenuitem.o : gtkcheckmenuitem.c \
-- gtkcheckmenuitem.h ../gdk/gdk.h ../gdk/gdktypes.h \
-- ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkmenuitem.h gtkitem.h \
-- gtkbin.h gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h gtkaccellabel.h \
-- gtklabel.h gtkmisc.h gtksignal.h gtkmarshal.h
--gtkclist.lo gtkclist.o : gtkclist.c ../config.h gtkmain.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkenums.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h gtkclist.h gtksignal.h gtkmarshal.h \
-- gtkalignment.h gtkbin.h gtkcontainer.h gtklabel.h gtkmisc.h \
-- gtkbutton.h gtkhscrollbar.h gtkscrollbar.h gtkrange.h \
-- gtkvscrollbar.h gtkbindings.h gtkdnd.h gtkselection.h \
-- gtkwindow.h ../gdk/gdkx.h ../gdk/gdkprivate.h \
-- ../gdk/gdkkeysyms.h
--gtkcolorsel.lo gtkcolorsel.o : gtkcolorsel.c ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkcolorsel.h gtkwindow.h gtkaccelgroup.h gtkobject.h gtkarg.h \
-- gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h gtkbin.h \
-- gtkcontainer.h gtkwidget.h gtkadjustment.h gtkdata.h gtkstyle.h \
-- gtkvbox.h gtkbox.h gtkframe.h gtkpreview.h gtkbutton.h \
-- gtkentry.h gtkeditable.h gtkhbox.h gtklabel.h gtkmisc.h \
-- gtkmain.h gtksignal.h gtkmarshal.h gtkrange.h gtkscale.h \
-- gtkhscale.h gtktable.h gtkeventbox.h gtkwindow.h gtkhbbox.h \
-- gtkbbox.h gtkintl.h ../config.h gtkdnd.h gtkselection.h \
-- gtkselection.h
--gtkcombo.lo gtkcombo.o : gtkcombo.c gtkarrow.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkmisc.h \
-- gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkenums.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h gtklabel.h gtklist.h gtkcontainer.h \
-- gtklistitem.h gtkitem.h gtkbin.h gtkentry.h gtkeditable.h \
-- gtkeventbox.h gtkbutton.h gtklistitem.h gtkscrolledwindow.h \
-- gtkhscrollbar.h gtkscrollbar.h gtkrange.h gtkvscrollbar.h \
-- gtkviewport.h gtkmain.h gtksignal.h gtkmarshal.h gtkwindow.h \
-- ../gdk/gdkkeysyms.h gtkcombo.h gtkhbox.h gtkbox.h gtkframe.h
--gtkcontainer.lo gtkcontainer.o : gtkcontainer.c gtkcontainer.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h gtkprivate.h \
-- gtksignal.h gtkmarshal.h gtkmain.h
--gtkctree.lo gtkctree.o : gtkctree.c gtkctree.h gtkclist.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtksignal.h gtkenums.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkdebug.h gtkmarshal.h gtkalignment.h \
-- gtkbin.h gtkcontainer.h gtkwidget.h gtkaccelgroup.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h gtklabel.h gtkmisc.h \
-- gtkbutton.h gtkhscrollbar.h gtkscrollbar.h gtkrange.h \
-- gtkvscrollbar.h gtkbindings.h gtkmain.h gtkdnd.h gtkselection.h \
-- ../gdk/gdkx.h ../gdk/gdkprivate.h ../gdk/gdkkeysyms.h
--gtkcurve.lo gtkcurve.o : gtkcurve.c gtkcurve.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkdrawingarea.h gtkwidget.h gtkaccelgroup.h gtkobject.h \
-- gtkarg.h gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h gtkdrawingarea.h gtkmain.h \
-- gtkradiobutton.h gtkcheckbutton.h gtktogglebutton.h gtkbutton.h \
-- gtkbin.h gtkcontainer.h gtksignal.h gtkmarshal.h gtktable.h
--gtkdata.lo gtkdata.o : gtkdata.c gtkdata.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkenums.h gtkdebug.h gtksignal.h gtkmarshal.h
--gtkdialog.lo gtkdialog.o : gtkdialog.c gtkbutton.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkbin.h \
-- gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h gtkdialog.h \
-- gtkwindow.h gtkhbox.h gtkbox.h gtkhseparator.h gtkseparator.h \
-- gtkvbox.h
--gtkdnd.lo gtkdnd.o : gtkdnd.c ../gdk/gdkx.h ../gdk/gdkprivate.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkkeysyms.h \
-- gtkdnd.h ../gdk/gdk.h ../gdk/gdkrgb.h gtkenums.h gtkwidget.h \
-- gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkdebug.h gtkadjustment.h gtkdata.h \
-- gtkstyle.h gtkselection.h gtkinvisible.h gtkbin.h \
-- gtkcontainer.h gtkmain.h gtksignal.h gtkmarshal.h gtkwindow.h
--gtkdrawingarea.lo gtkdrawingarea.o : gtkdrawingarea.c gtkdrawingarea.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkwidget.h gtkaccelgroup.h gtkobject.h \
-- gtkarg.h gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h
--gtkeditable.lo gtkeditable.o : gtkeditable.c ../gdk/gdkx.h \
-- ../gdk/gdkprivate.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkkeysyms.h ../gdk/gdki18n.h gtkeditable.h ../gdk/gdk.h \
-- ../gdk/gdkrgb.h gtkwidget.h gtkaccelgroup.h gtkobject.h \
-- gtkarg.h gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h gtkmain.h gtkselection.h \
-- gtksignal.h gtkmarshal.h
--gtkentry.lo gtkentry.o : gtkentry.c ../gdk/gdkkeysyms.h ../gdk/gdki18n.h \
-- gtkentry.h ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkeditable.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkenums.h gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h \
-- gtkmain.h gtkselection.h gtksignal.h gtkmarshal.h gtkstyle.h
--gtkeventbox.lo gtkeventbox.o : gtkeventbox.c gtksignal.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkenums.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkdebug.h gtkmarshal.h gtkeventbox.h \
-- gtkbin.h gtkcontainer.h gtkwidget.h gtkaccelgroup.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h
--gtkfilesel.lo gtkfilesel.o : gtkfilesel.c fnmatch.h ../gdk/gdkkeysyms.h \
-- gtkbutton.h ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkbin.h gtkcontainer.h gtkenums.h gtkwidget.h \
-- gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkdebug.h gtkadjustment.h gtkdata.h \
-- gtkstyle.h gtkentry.h gtkeditable.h gtkfilesel.h gtkwindow.h \
-- gtkhbox.h gtkbox.h gtkhbbox.h gtkbbox.h gtklabel.h gtkmisc.h \
-- gtklist.h gtklistitem.h gtkitem.h gtklistitem.h gtkmain.h \
-- gtkscrolledwindow.h gtkhscrollbar.h gtkscrollbar.h gtkrange.h \
-- gtkvscrollbar.h gtkviewport.h gtksignal.h gtkmarshal.h \
-- gtkvbox.h gtkmenu.h gtkmenushell.h gtkmenuitem.h \
-- gtkoptionmenu.h gtkbutton.h gtkclist.h gtksignal.h \
-- gtkalignment.h gtklabel.h gtkdialog.h gtkintl.h ../config.h
--gtkfixed.lo gtkfixed.o : gtkfixed.c gtkfixed.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h
--gtkfontsel.lo gtkfontsel.o : gtkfontsel.c ../gdk/gdkx.h \
-- ../gdk/gdkprivate.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkkeysyms.h gtkbutton.h ../gdk/gdk.h ../gdk/gdkrgb.h \
-- gtkbin.h gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h \
-- gtkcheckbutton.h gtktogglebutton.h gtkbutton.h gtkclist.h \
-- gtksignal.h gtkmarshal.h gtkalignment.h gtklabel.h gtkmisc.h \
-- gtkhscrollbar.h gtkscrollbar.h gtkrange.h gtkvscrollbar.h \
-- gtkentry.h gtkeditable.h gtkfontsel.h gtkwindow.h gtknotebook.h \
-- gtkframe.h gtkhbbox.h gtkbbox.h gtkbox.h gtkhbox.h gtklabel.h \
-- gtknotebook.h gtkradiobutton.h gtkcheckbutton.h gtksignal.h \
-- gtktable.h gtkvbox.h gtkscrolledwindow.h gtkviewport.h \
-- gtkintl.h ../config.h
--gtkframe.lo gtkframe.o : gtkframe.c gtkframe.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkbin.h \
-- gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h
--gtkgamma.lo gtkgamma.o : gtkgamma.c gtkgamma.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkvbox.h \
-- gtkbox.h gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h gtkcurve.h \
-- gtkdrawingarea.h gtkdialog.h gtkwindow.h gtkbin.h \
-- gtkdrawingarea.h gtkentry.h gtkeditable.h gtkhbox.h gtklabel.h \
-- gtkmisc.h gtkmain.h gtkpixmap.h gtkradiobutton.h \
-- gtkcheckbutton.h gtktogglebutton.h gtkbutton.h gtksignal.h \
-- gtkmarshal.h gtktable.h gtkvbox.h gtkwindow.h gtkintl.h \
-- ../config.h
--gtkgc.lo gtkgc.o : gtkgc.c gtkgc.h ../gdk/gdk.h ../gdk/gdktypes.h \
-- ../gdk/gdkcursors.h ../gdk/gdkrgb.h
--gtkhandlebox.lo gtkhandlebox.o : gtkhandlebox.c ../gdk/gdkx.h \
-- ../gdk/gdkprivate.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- gtkhandlebox.h ../gdk/gdk.h ../gdk/gdkrgb.h gtkbin.h \
-- gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h gtkinvisible.h \
-- gtkmain.h gtksignal.h gtkmarshal.h gtkwindow.h
--gtkhbbox.lo gtkhbbox.o : gtkhbbox.c gtkhbbox.h gtkbbox.h gtkbox.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkcontainer.h gtkenums.h gtkwidget.h \
-- gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkdebug.h gtkadjustment.h gtkdata.h \
-- gtkstyle.h
--gtkhbox.lo gtkhbox.o : gtkhbox.c gtkhbox.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkbox.h \
-- gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h
--gtkhpaned.lo gtkhpaned.o : gtkhpaned.c gtkhpaned.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkpaned.h gtkcontainer.h gtkenums.h gtkwidget.h \
-- gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkdebug.h gtkadjustment.h gtkdata.h \
-- gtkstyle.h gtkmain.h gtksignal.h gtkmarshal.h
--gtkhruler.lo gtkhruler.o : gtkhruler.c gtkhruler.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkruler.h gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h \
-- gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h
--gtkhscale.lo gtkhscale.o : gtkhscale.c gtkhscale.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkscale.h gtkrange.h gtkadjustment.h gtkdata.h gtkobject.h \
-- gtkarg.h gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkwidget.h gtkaccelgroup.h gtkstyle.h gtksignal.h gtkmarshal.h \
-- ../gdk/gdkkeysyms.h
--gtkhscrollbar.lo gtkhscrollbar.o : gtkhscrollbar.c gtkhscrollbar.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkscrollbar.h gtkrange.h gtkadjustment.h \
-- gtkdata.h gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkenums.h gtkdebug.h gtkwidget.h gtkaccelgroup.h gtkstyle.h \
-- gtksignal.h gtkmarshal.h ../gdk/gdkkeysyms.h
--gtkhseparator.lo gtkhseparator.o : gtkhseparator.c gtkhseparator.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkseparator.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkenums.h gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h
--gtkimage.lo gtkimage.o : gtkimage.c gtkcontainer.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkenums.h gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h \
-- gtktypeutils.h gtktypebuiltins.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h gtkimage.h gtkmisc.h
--gtkinputdialog.lo gtkinputdialog.o : gtkinputdialog.c \
-- ../gdk/gdkkeysyms.h gtkbutton.h ../gdk/gdk.h ../gdk/gdktypes.h \
-- ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkbin.h gtkcontainer.h \
-- gtkenums.h gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h \
-- gtktypeutils.h gtktypebuiltins.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h gtkentry.h gtkeditable.h gtkhbox.h \
-- gtkbox.h gtkhseparator.h gtkseparator.h gtkinputdialog.h \
-- gtkdialog.h gtkwindow.h gtklabel.h gtkmisc.h gtklistitem.h \
-- gtkitem.h gtkmain.h gtkmenu.h gtkmenushell.h gtkmenuitem.h \
-- gtknotebook.h gtkoptionmenu.h gtkbutton.h gtkscrolledwindow.h \
-- gtkhscrollbar.h gtkscrollbar.h gtkrange.h gtkvscrollbar.h \
-- gtkviewport.h gtksignal.h gtkmarshal.h gtktable.h gtkvbox.h \
-- gtkintl.h ../config.h
--gtkinvisible.lo gtkinvisible.o : gtkinvisible.c gtksignal.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkenums.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkdebug.h gtkmarshal.h gtkinvisible.h \
-- gtkbin.h gtkcontainer.h gtkwidget.h gtkaccelgroup.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h
--gtkitem.lo gtkitem.o : gtkitem.c gtkitem.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkbin.h \
-- gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h gtksignal.h \
-- gtkmarshal.h
--gtkitemfactory.lo gtkitemfactory.o : gtkitemfactory.c gtkitemfactory.h \
-- gtkwidget.h ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkaccelgroup.h gtkobject.h gtkarg.h \
-- gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h gtkmenufactory.h \
-- gtkbindings.h gtksignal.h gtkmarshal.h gtkoptionmenu.h \
-- gtkbutton.h gtkbin.h gtkcontainer.h gtkmenubar.h gtkmenushell.h \
-- gtkmenu.h gtkmenuitem.h gtkitem.h gtkradiomenuitem.h \
-- gtkcheckmenuitem.h gtktearoffmenuitem.h gtkaccellabel.h \
-- gtklabel.h gtkmisc.h ../gdk/gdkkeysyms.h
--gtklabel.lo gtklabel.o : gtklabel.c gtklabel.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkmisc.h \
-- gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkenums.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h ../gdk/gdkkeysyms.h ../gdk/gdki18n.h
--gtklayout.lo gtklayout.o : gtklayout.c gtklayout.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h gtksignal.h \
-- gtkmarshal.h gtkprivate.h ../gdk/gdkx.h ../gdk/gdkprivate.h
--gtklist.lo gtklist.o : gtklist.c gtklist.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkenums.h gtkcontainer.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h gtklistitem.h \
-- gtkitem.h gtkbin.h gtklistitem.h gtkmain.h gtksignal.h \
-- gtkmarshal.h gtklabel.h gtkmisc.h
--gtklistitem.lo gtklistitem.o : gtklistitem.c gtkbindings.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkenums.h gtkdebug.h gtklabel.h gtkmisc.h gtkwidget.h \
-- gtkaccelgroup.h gtkadjustment.h gtkdata.h gtkstyle.h \
-- gtklistitem.h gtkitem.h gtkbin.h gtkcontainer.h gtklist.h \
-- gtklistitem.h gtksignal.h gtkmarshal.h ../gdk/gdkkeysyms.h
--gtkmain.lo gtkmain.o : gtkmain.c gtkbutton.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkbin.h \
-- gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h gtkdnd.h \
-- gtkselection.h gtkfeatures.h gtkhscrollbar.h gtkscrollbar.h \
-- gtkrange.h gtkhseparator.h gtkseparator.h gtkmain.h \
-- gtkpreview.h gtkrc.h gtkscrolledwindow.h gtkhscrollbar.h \
-- gtkvscrollbar.h gtkviewport.h gtkselection.h gtksignal.h \
-- gtkmarshal.h gtktable.h gtktext.h gtkeditable.h gtkvbox.h \
-- gtkbox.h gtkvscrollbar.h gtkwidget.h gtkwindow.h gtkprivate.h \
-- ../gdk/gdki18n.h ../config.h gtkdebug.h gtkintl.h
--gtkmarshal.lo gtkmarshal.o : gtkmarshal.c gtkmarshal.h gtktypeutils.h \
-- gtktypebuiltins.h gtkobject.h gtkarg.h gtkenums.h gtkdebug.h
--gtkmenu.lo gtkmenu.o : gtkmenu.c ../gdk/gdkkeysyms.h gtkbindings.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkenums.h gtkdebug.h gtklabel.h gtkmisc.h \
-- gtkwidget.h gtkaccelgroup.h gtkadjustment.h gtkdata.h \
-- gtkstyle.h gtkmain.h gtkmenu.h gtkmenushell.h gtkcontainer.h \
-- gtkmenuitem.h gtkitem.h gtkbin.h gtksignal.h gtkmarshal.h \
-- gtkwindow.h
--gtkmenubar.lo gtkmenubar.o : gtkmenubar.c ../gdk/gdkkeysyms.h \
-- gtkbindings.h ../gdk/gdk.h ../gdk/gdktypes.h \
-- ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkobject.h gtkarg.h \
-- gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkmain.h gtkwidget.h gtkaccelgroup.h gtkadjustment.h gtkdata.h \
-- gtkstyle.h gtkmenubar.h gtkmenushell.h gtkcontainer.h \
-- gtkmenuitem.h gtkitem.h gtkbin.h
--gtkmenufactory.lo gtkmenufactory.o : gtkmenufactory.c gtkcheckmenuitem.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkmenuitem.h gtkitem.h gtkbin.h gtkcontainer.h \
-- gtkenums.h gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h \
-- gtktypeutils.h gtktypebuiltins.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h gtkmenu.h gtkmenushell.h gtkmenubar.h \
-- gtkmenufactory.h gtkmenuitem.h gtksignal.h gtkmarshal.h
--gtkmenuitem.lo gtkmenuitem.o : gtkmenuitem.c gtkaccellabel.h gtklabel.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkmisc.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkenums.h gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h \
-- gtkmain.h gtkmenu.h gtkmenushell.h gtkcontainer.h gtkmenubar.h \
-- gtkmenuitem.h gtkitem.h gtkbin.h gtksignal.h gtkmarshal.h
--gtkmenushell.lo gtkmenushell.o : gtkmenushell.c ../gdk/gdkkeysyms.h \
-- gtkbindings.h ../gdk/gdk.h ../gdk/gdktypes.h \
-- ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkobject.h gtkarg.h \
-- gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkmain.h gtkwidget.h gtkaccelgroup.h gtkadjustment.h gtkdata.h \
-- gtkstyle.h gtkmenuitem.h gtkitem.h gtkbin.h gtkcontainer.h \
-- gtktearoffmenuitem.h gtkmenuitem.h gtkmenushell.h gtksignal.h \
-- gtkmarshal.h
--gtkmisc.lo gtkmisc.o : gtkmisc.c gtkcontainer.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkenums.h gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h \
-- gtktypeutils.h gtktypebuiltins.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h gtkmisc.h
--gtknotebook.lo gtknotebook.o : gtknotebook.c gtknotebook.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h gtksignal.h \
-- gtkmarshal.h gtkmain.h gtkmenu.h gtkmenushell.h gtkmenuitem.h \
-- gtkitem.h gtkbin.h gtklabel.h gtkmisc.h ../gdk/gdkkeysyms.h \
-- gtkintl.h ../config.h
--gtkobject.lo gtkobject.o : gtkobject.c gtkobject.h gtkarg.h \
-- gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtksignal.h ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkobject.h gtkmarshal.h
--gtkoptionmenu.lo gtkoptionmenu.o : gtkoptionmenu.c gtkmenu.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkaccelgroup.h gtkobject.h gtkarg.h \
-- gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkmenushell.h gtkcontainer.h gtkwidget.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h gtkmenuitem.h gtkitem.h gtkbin.h \
-- gtkoptionmenu.h gtkbutton.h gtksignal.h gtkmarshal.h \
-- ../gdk/gdkkeysyms.h
--gtkpacker.lo gtkpacker.o : gtkpacker.c gtkpacker.h gtkcontainer.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h
--gtkpaned.lo gtkpaned.o : gtkpaned.c gtkpaned.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h gtkhpaned.h \
-- gtkpaned.h
--gtkpixmap.lo gtkpixmap.o : gtkpixmap.c gtkcontainer.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkenums.h gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h \
-- gtktypeutils.h gtktypebuiltins.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h gtkpixmap.h gtkmisc.h
--gtkplug.lo gtkplug.o : gtkplug.c ../gdk/gdkx.h ../gdk/gdkprivate.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkkeysyms.h \
-- gtkplug.h ../gdk/gdk.h ../gdk/gdkrgb.h gtkwindow.h \
-- gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkenums.h gtkdebug.h gtkbin.h gtkcontainer.h \
-- gtkwidget.h gtkadjustment.h gtkdata.h gtkstyle.h
--gtkpreview.lo gtkpreview.o : gtkpreview.c ../gdk/gdkx.h \
-- ../gdk/gdkprivate.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkpreview.h gtkwidget.h ../gdk/gdk.h \
-- gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkenums.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h gtksignal.h gtkmarshal.h
--gtkprogress.lo gtkprogress.o : gtkprogress.c gtkprogress.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkenums.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h gtksignal.h gtkmarshal.h
--gtkprogressbar.lo gtkprogressbar.o : gtkprogressbar.c ../config.h \
-- gtkprogressbar.h ../gdk/gdk.h ../gdk/gdktypes.h \
-- ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkprogress.h gtkwidget.h \
-- gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkenums.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h gtksignal.h gtkmarshal.h
--gtkradiobutton.lo gtkradiobutton.o : gtkradiobutton.c gtklabel.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkmisc.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkenums.h gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h \
-- gtkradiobutton.h gtkcheckbutton.h gtktogglebutton.h gtkbutton.h \
-- gtkbin.h gtkcontainer.h gtksignal.h gtkmarshal.h
--gtkradiomenuitem.lo gtkradiomenuitem.o : gtkradiomenuitem.c \
-- gtkaccellabel.h gtklabel.h ../gdk/gdk.h ../gdk/gdktypes.h \
-- ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkmisc.h gtkwidget.h \
-- gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkenums.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h gtkradiomenuitem.h gtkcheckmenuitem.h \
-- gtkmenuitem.h gtkitem.h gtkbin.h gtkcontainer.h
--gtkrange.lo gtkrange.o : gtkrange.c gtkmain.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkenums.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h gtkrange.h gtksignal.h gtkmarshal.h
--gtkrc.lo gtkrc.o : gtkrc.c gtkrc.h gtkstyle.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkenums.h gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h \
-- gtktypeutils.h gtktypebuiltins.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkbindings.h gtkthemes.h gtkintl.h ../config.h
--gtkruler.lo gtkruler.o : gtkruler.c gtkruler.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkenums.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h
--gtkscale.lo gtkscale.o : gtkscale.c gtkcontainer.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkenums.h gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h \
-- gtktypeutils.h gtktypebuiltins.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h gtkscale.h gtkrange.h
--gtkscrollbar.lo gtkscrollbar.o : gtkscrollbar.c gtkscrollbar.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkrange.h gtkadjustment.h gtkdata.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkenums.h gtkdebug.h gtkwidget.h gtkaccelgroup.h gtkstyle.h
--gtkscrolledwindow.lo gtkscrolledwindow.o : gtkscrolledwindow.c \
-- gtkscrolledwindow.h ../gdk/gdk.h ../gdk/gdktypes.h \
-- ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkhscrollbar.h \
-- gtkscrollbar.h gtkrange.h gtkadjustment.h gtkdata.h gtkobject.h \
-- gtkarg.h gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkwidget.h gtkaccelgroup.h gtkstyle.h gtkvscrollbar.h \
-- gtkviewport.h gtkbin.h gtkcontainer.h gtksignal.h gtkmarshal.h
--gtkselection.lo gtkselection.o : gtkselection.c ../gdk/gdkx.h \
-- ../gdk/gdkprivate.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- gtkmain.h ../gdk/gdk.h ../gdk/gdkrgb.h gtkwidget.h \
-- gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkenums.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h gtkselection.h gtksignal.h gtkmarshal.h
--gtkseparator.lo gtkseparator.o : gtkseparator.c gtkseparator.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkwidget.h gtkaccelgroup.h gtkobject.h \
-- gtkarg.h gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h
--gtksignal.lo gtksignal.o : gtksignal.c gtksignal.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkenums.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkdebug.h gtkmarshal.h gtkargcollector.c
--gtksocket.lo gtksocket.o : gtksocket.c ../gdk/gdkx.h ../gdk/gdkprivate.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkkeysyms.h \
-- gtkwindow.h ../gdk/gdk.h ../gdk/gdkrgb.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkenums.h gtkdebug.h gtkbin.h gtkcontainer.h gtkwidget.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h gtksignal.h gtkmarshal.h \
-- gtksocket.h gtkdnd.h gtkselection.h
--gtkspinbutton.lo gtkspinbutton.o : gtkspinbutton.c ../gdk/gdkkeysyms.h \
-- gtkspinbutton.h ../gdk/gdk.h ../gdk/gdktypes.h \
-- ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkentry.h gtkeditable.h \
-- gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkenums.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h gtkmain.h gtksignal.h gtkmarshal.h
--gtkstatusbar.lo gtkstatusbar.o : gtkstatusbar.c gtkframe.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkbin.h \
-- gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h gtklabel.h \
-- gtkmisc.h gtksignal.h gtkmarshal.h gtkstatusbar.h gtkhbox.h \
-- gtkbox.h
--gtkstyle.lo gtkstyle.o : gtkstyle.c gtkgc.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkrc.h \
-- gtkstyle.h gtkenums.h gtkwidget.h gtkaccelgroup.h gtkobject.h \
-- gtkarg.h gtktypeutils.h gtktypebuiltins.h gtkdebug.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h gtkwidget.h gtkthemes.h \
-- ../gdk/gdkprivate.h
--gtktable.lo gtktable.o : gtktable.c gtktable.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h
--gtktearoffmenuitem.lo gtktearoffmenuitem.o : gtktearoffmenuitem.c \
-- gtkmenu.h ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkaccelgroup.h gtkobject.h gtkarg.h \
-- gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkmenushell.h gtkcontainer.h gtkwidget.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h gtksignal.h gtkmarshal.h \
-- gtktearoffmenuitem.h gtkmenuitem.h gtkitem.h gtkbin.h
--gtktext.lo gtktext.o : gtktext.c ../gdk/gdkkeysyms.h ../gdk/gdki18n.h \
-- gtkmain.h ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkwidget.h gtkaccelgroup.h gtkobject.h \
-- gtkarg.h gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h gtkselection.h gtksignal.h \
-- gtkmarshal.h gtktext.h gtkeditable.h line-wrap.xbm \
-- line-arrow.xbm
--gtkthemes.lo gtkthemes.o : gtkthemes.c gtkthemes.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkstyle.h gtkenums.h gtkwidget.h gtkaccelgroup.h gtkobject.h \
-- gtkarg.h gtktypeutils.h gtktypebuiltins.h gtkdebug.h \
-- gtkadjustment.h gtkdata.h gtkmain.h gtkrc.h gtkselection.h \
-- gtksignal.h gtkmarshal.h gtkwidget.h ../config.h gtkintl.h
--gtktipsquery.lo gtktipsquery.o : gtktipsquery.c gtktipsquery.h \
-- gtklabel.h ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkmisc.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkenums.h gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h \
-- gtksignal.h gtkmarshal.h gtktooltips.h gtkmain.h gtkintl.h \
-- ../config.h
--gtktogglebutton.lo gtktogglebutton.o : gtktogglebutton.c gtklabel.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkmisc.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkenums.h gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h \
-- gtkmain.h gtksignal.h gtkmarshal.h gtktogglebutton.h \
-- gtkbutton.h gtkbin.h gtkcontainer.h
--gtktoolbar.lo gtktoolbar.o : gtktoolbar.c gtkbutton.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkbin.h \
-- gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h \
-- gtktogglebutton.h gtkbutton.h gtkradiobutton.h gtkcheckbutton.h \
-- gtktogglebutton.h gtklabel.h gtkmisc.h gtkvbox.h gtkbox.h \
-- gtktoolbar.h gtkpixmap.h gtksignal.h gtkmarshal.h gtktooltips.h
--gtktooltips.lo gtktooltips.o : gtktooltips.c gtkmain.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkenums.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h gtkwidget.h gtkwindow.h gtkbin.h \
-- gtkcontainer.h gtksignal.h gtkmarshal.h gtkstyle.h \
-- gtktooltips.h
--gtktree.lo gtktree.o : gtktree.c gtktree.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h gtktreeitem.h \
-- gtkitem.h gtkbin.h gtkmain.h gtksignal.h gtkmarshal.h gtklist.h \
-- gtklistitem.h
--gtktreeitem.lo gtktreeitem.o : gtktreeitem.c gtklabel.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkmisc.h \
-- gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkenums.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h gtktree.h gtkcontainer.h gtktreeitem.h \
-- gtkitem.h gtkbin.h gtkeventbox.h gtkpixmap.h gtkmain.h \
-- gtksignal.h gtkmarshal.h tree_plus.xpm tree_minus.xpm
--gtktypeutils.lo gtktypeutils.o : gtktypeutils.c gtktypeutils.h \
-- gtktypebuiltins.h makeenums.h ../gdk/gdkprivate.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdk.h \
-- ../gdk/gdkrgb.h gtk.h gtkaccelgroup.h gtkobject.h gtkarg.h \
-- gtktypeutils.h gtkenums.h gtkdebug.h gtkaccellabel.h gtklabel.h \
-- gtkmisc.h gtkwidget.h gtkadjustment.h gtkdata.h gtkstyle.h \
-- gtkalignment.h gtkbin.h gtkcontainer.h gtkaspectframe.h \
-- gtkframe.h gtkarrow.h gtkbindings.h gtkbox.h gtkbbox.h \
-- gtkbutton.h gtkcalendar.h gtksignal.h gtkmarshal.h \
-- gtkcheckbutton.h gtktogglebutton.h gtkcheckmenuitem.h \
-- gtkmenuitem.h gtkitem.h gtkclist.h gtkhscrollbar.h \
-- gtkscrollbar.h gtkrange.h gtkvscrollbar.h gtkcolorsel.h \
-- gtkwindow.h gtkvbox.h gtkpreview.h gtkentry.h gtkeditable.h \
-- gtkhbox.h gtkmain.h gtkscale.h gtkhscale.h gtktable.h \
-- gtkeventbox.h gtkcombo.h gtkcompat.h gtkctree.h gtkcurve.h \
-- gtkdrawingarea.h gtkdialog.h gtkdnd.h gtkselection.h \
-- gtkfeatures.h gtkfilesel.h gtkfixed.h gtkfontsel.h \
-- gtknotebook.h gtkgamma.h gtkgc.h gtkhandlebox.h gtkhbbox.h \
-- gtkhpaned.h gtkpaned.h gtkhruler.h gtkruler.h gtkhseparator.h \
-- gtkseparator.h gtkimage.h gtkinputdialog.h gtkitemfactory.h \
-- gtkmenufactory.h gtklayout.h gtklist.h gtklistitem.h gtkmenu.h \
-- gtkmenushell.h gtkmenubar.h gtkoptionmenu.h gtkpacker.h \
-- gtkpixmap.h gtkplug.h gtkprogress.h gtkprogressbar.h \
-- gtkradiobutton.h gtkradiomenuitem.h gtkrc.h gtkscrolledwindow.h \
-- gtkviewport.h gtksocket.h gtkspinbutton.h gtkstatusbar.h \
-- gtktearoffmenuitem.h gtktext.h gtkthemes.h gtktipsquery.h \
-- gtktoolbar.h gtktooltips.h gtktree.h gtktreeitem.h gtkvbbox.h \
-- gtkvpaned.h gtkvruler.h gtkvscale.h gtkvseparator.h \
-- gtkprivate.h gtktypebuiltins_vars.c gtktypebuiltins_evals.c \
-- gtktypebuiltins_ids.c
--gtkvbbox.lo gtkvbbox.o : gtkvbbox.c gtkvbbox.h gtkbbox.h gtkbox.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkcontainer.h gtkenums.h gtkwidget.h \
-- gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkdebug.h gtkadjustment.h gtkdata.h \
-- gtkstyle.h
--gtkvbox.lo gtkvbox.o : gtkvbox.c gtkvbox.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkbox.h \
-- gtkcontainer.h gtkenums.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h
--gtkviewport.lo gtkviewport.o : gtkviewport.c gtksignal.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkenums.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkdebug.h gtkmarshal.h gtkviewport.h \
-- gtkadjustment.h gtkdata.h gtkbin.h gtkcontainer.h gtkwidget.h \
-- gtkaccelgroup.h gtkstyle.h
--gtkvpaned.lo gtkvpaned.o : gtkvpaned.c gtkvpaned.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkpaned.h gtkcontainer.h gtkenums.h gtkwidget.h \
-- gtkaccelgroup.h gtkobject.h gtkarg.h gtktypeutils.h \
-- gtktypebuiltins.h gtkdebug.h gtkadjustment.h gtkdata.h \
-- gtkstyle.h gtkmain.h gtksignal.h gtkmarshal.h
--gtkvruler.lo gtkvruler.o : gtkvruler.c gtkvruler.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkruler.h gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h \
-- gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h
--gtkvscale.lo gtkvscale.o : gtkvscale.c gtkvscale.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkscale.h gtkrange.h gtkadjustment.h gtkdata.h gtkobject.h \
-- gtkarg.h gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkwidget.h gtkaccelgroup.h gtkstyle.h gtksignal.h gtkmarshal.h \
-- ../gdk/gdkkeysyms.h
--gtkvscrollbar.lo gtkvscrollbar.o : gtkvscrollbar.c gtkvscrollbar.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkscrollbar.h gtkrange.h gtkadjustment.h \
-- gtkdata.h gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkenums.h gtkdebug.h gtkwidget.h gtkaccelgroup.h gtkstyle.h \
-- gtksignal.h gtkmarshal.h ../gdk/gdkkeysyms.h
--gtkvseparator.lo gtkvseparator.o : gtkvseparator.c gtkvseparator.h \
-- ../gdk/gdk.h ../gdk/gdktypes.h ../gdk/gdkcursors.h \
-- ../gdk/gdkrgb.h gtkseparator.h gtkwidget.h gtkaccelgroup.h \
-- gtkobject.h gtkarg.h gtktypeutils.h gtktypebuiltins.h \
-- gtkenums.h gtkdebug.h gtkadjustment.h gtkdata.h gtkstyle.h
--gtkwidget.lo gtkwidget.o : gtkwidget.c gtkcontainer.h ../gdk/gdk.h \
-- ../gdk/gdktypes.h ../gdk/gdkcursors.h ../gdk/gdkrgb.h \
-- gtkenums.h gtkwidget.h gtkaccelgroup.h gtkobject.h gtkarg.h \
-- gtktypeutils.h gtktypebuiltins.h gtkdebug.h gtkadjustment.h \
-- gtkdata.h gtkstyle.h gtkmain.h gtkrc.h gtkselection.h \
-- gtksignal.h gtkmarshal.h gtkwidget.h gtkwindow.h gtkbin.h \
-- gtkcontainer.h gtkbindings.h gtkprivate.h ../gdk/gdkx.h \
-- ../gdk/gdkprivate.h
--gtkwindow.lo gtkwindow.o : gtkwindow.c ../gdk/gdk.h ../gdk/gdktypes.h \
-- ../gdk/gdkcursors.h ../gdk/gdkrgb.h ../gdk/gdkkeysyms.h \
-- ../gdk/gdkx.h ../gdk/gdkprivate.h gtkprivate.h gtkobject.h \
-- gtkarg.h gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkwidget.h gtkaccelgroup.h gtkadjustment.h gtkdata.h \
-- gtkstyle.h gtkrc.h gtksignal.h gtkmarshal.h gtkwindow.h \
-- gtkbin.h gtkcontainer.h gtkbindings.h gtkmain.h
--simple.o: simple.c gtk.h ../gdk/gdk.h ../gdk/gdktypes.h \
-- ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkaccelgroup.h gtkobject.h \
-- gtkarg.h gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkaccellabel.h gtklabel.h gtkmisc.h gtkwidget.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h gtkalignment.h gtkbin.h \
-- gtkcontainer.h gtkaspectframe.h gtkframe.h gtkarrow.h \
-- gtkbindings.h gtkbox.h gtkbbox.h gtkbutton.h gtkcalendar.h \
-- gtksignal.h gtkmarshal.h gtkcheckbutton.h gtktogglebutton.h \
-- gtkcheckmenuitem.h gtkmenuitem.h gtkitem.h gtkclist.h \
-- gtkhscrollbar.h gtkscrollbar.h gtkrange.h gtkvscrollbar.h \
-- gtkcolorsel.h gtkwindow.h gtkvbox.h gtkpreview.h gtkentry.h \
-- gtkeditable.h gtkhbox.h gtkmain.h gtkscale.h gtkhscale.h \
-- gtktable.h gtkeventbox.h gtkcombo.h gtkcompat.h gtkctree.h \
-- gtkcurve.h gtkdrawingarea.h gtkdialog.h gtkdnd.h gtkselection.h \
-- gtkfeatures.h gtkfilesel.h gtkfixed.h gtkfontsel.h \
-- gtknotebook.h gtkgamma.h gtkgc.h gtkhandlebox.h gtkhbbox.h \
-- gtkhpaned.h gtkpaned.h gtkhruler.h gtkruler.h gtkhseparator.h \
-- gtkseparator.h gtkimage.h gtkinputdialog.h gtkitemfactory.h \
-- gtkmenufactory.h gtklayout.h gtklist.h gtklistitem.h gtkmenu.h \
-- gtkmenushell.h gtkmenubar.h gtkoptionmenu.h gtkpacker.h \
-- gtkpixmap.h gtkplug.h gtkprogress.h gtkprogressbar.h \
-- gtkradiobutton.h gtkradiomenuitem.h gtkrc.h gtkscrolledwindow.h \
-- gtkviewport.h gtksocket.h gtkspinbutton.h gtkstatusbar.h \
-- gtktearoffmenuitem.h gtktext.h gtkthemes.h gtktipsquery.h \
-- gtktoolbar.h gtktooltips.h gtktree.h gtktreeitem.h gtkvbbox.h \
-- gtkvpaned.h gtkvruler.h gtkvscale.h gtkvseparator.h \
-- ../gdk/gdkprivate.h
--testdnd.o: testdnd.c gtk.h ../gdk/gdk.h ../gdk/gdktypes.h \
-- ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkaccelgroup.h gtkobject.h \
-- gtkarg.h gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkaccellabel.h gtklabel.h gtkmisc.h gtkwidget.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h gtkalignment.h gtkbin.h \
-- gtkcontainer.h gtkaspectframe.h gtkframe.h gtkarrow.h \
-- gtkbindings.h gtkbox.h gtkbbox.h gtkbutton.h gtkcalendar.h \
-- gtksignal.h gtkmarshal.h gtkcheckbutton.h gtktogglebutton.h \
-- gtkcheckmenuitem.h gtkmenuitem.h gtkitem.h gtkclist.h \
-- gtkhscrollbar.h gtkscrollbar.h gtkrange.h gtkvscrollbar.h \
-- gtkcolorsel.h gtkwindow.h gtkvbox.h gtkpreview.h gtkentry.h \
-- gtkeditable.h gtkhbox.h gtkmain.h gtkscale.h gtkhscale.h \
-- gtktable.h gtkeventbox.h gtkcombo.h gtkcompat.h gtkctree.h \
-- gtkcurve.h gtkdrawingarea.h gtkdialog.h gtkdnd.h gtkselection.h \
-- gtkfeatures.h gtkfilesel.h gtkfixed.h gtkfontsel.h \
-- gtknotebook.h gtkgamma.h gtkgc.h gtkhandlebox.h gtkhbbox.h \
-- gtkhpaned.h gtkpaned.h gtkhruler.h gtkruler.h gtkhseparator.h \
-- gtkseparator.h gtkimage.h gtkinputdialog.h gtkitemfactory.h \
-- gtkmenufactory.h gtklayout.h gtklist.h gtklistitem.h gtkmenu.h \
-- gtkmenushell.h gtkmenubar.h gtkoptionmenu.h gtkpacker.h \
-- gtkpixmap.h gtkplug.h gtkprogress.h gtkprogressbar.h \
-- gtkradiobutton.h gtkradiomenuitem.h gtkrc.h gtkscrolledwindow.h \
-- gtkviewport.h gtksocket.h gtkspinbutton.h gtkstatusbar.h \
-- gtktearoffmenuitem.h gtktext.h gtkthemes.h gtktipsquery.h \
-- gtktoolbar.h gtktooltips.h gtktree.h gtktreeitem.h gtkvbbox.h \
-- gtkvpaned.h gtkvruler.h gtkvscale.h gtkvseparator.h
--testgtk.o: testgtk.c gtk.h ../gdk/gdk.h ../gdk/gdktypes.h \
-- ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkaccelgroup.h gtkobject.h \
-- gtkarg.h gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkaccellabel.h gtklabel.h gtkmisc.h gtkwidget.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h gtkalignment.h gtkbin.h \
-- gtkcontainer.h gtkaspectframe.h gtkframe.h gtkarrow.h \
-- gtkbindings.h gtkbox.h gtkbbox.h gtkbutton.h gtkcalendar.h \
-- gtksignal.h gtkmarshal.h gtkcheckbutton.h gtktogglebutton.h \
-- gtkcheckmenuitem.h gtkmenuitem.h gtkitem.h gtkclist.h \
-- gtkhscrollbar.h gtkscrollbar.h gtkrange.h gtkvscrollbar.h \
-- gtkcolorsel.h gtkwindow.h gtkvbox.h gtkpreview.h gtkentry.h \
-- gtkeditable.h gtkhbox.h gtkmain.h gtkscale.h gtkhscale.h \
-- gtktable.h gtkeventbox.h gtkcombo.h gtkcompat.h gtkctree.h \
-- gtkcurve.h gtkdrawingarea.h gtkdialog.h gtkdnd.h gtkselection.h \
-- gtkfeatures.h gtkfilesel.h gtkfixed.h gtkfontsel.h \
-- gtknotebook.h gtkgamma.h gtkgc.h gtkhandlebox.h gtkhbbox.h \
-- gtkhpaned.h gtkpaned.h gtkhruler.h gtkruler.h gtkhseparator.h \
-- gtkseparator.h gtkimage.h gtkinputdialog.h gtkitemfactory.h \
-- gtkmenufactory.h gtklayout.h gtklist.h gtklistitem.h gtkmenu.h \
-- gtkmenushell.h gtkmenubar.h gtkoptionmenu.h gtkpacker.h \
-- gtkpixmap.h gtkplug.h gtkprogress.h gtkprogressbar.h \
-- gtkradiobutton.h gtkradiomenuitem.h gtkrc.h gtkscrolledwindow.h \
-- gtkviewport.h gtksocket.h gtkspinbutton.h gtkstatusbar.h \
-- gtktearoffmenuitem.h gtktext.h gtkthemes.h gtktipsquery.h \
-- gtktoolbar.h gtktooltips.h gtktree.h gtktreeitem.h gtkvbbox.h \
-- gtkvpaned.h gtkvruler.h gtkvscale.h gtkvseparator.h \
-- ../gdk/gdkx.h ../gdk/gdkprivate.h ../gdk/gdkkeysyms.h \
-- circles.xbm
--testinput.o: testinput.c gtk.h ../gdk/gdk.h ../gdk/gdktypes.h \
-- ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkaccelgroup.h gtkobject.h \
-- gtkarg.h gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkaccellabel.h gtklabel.h gtkmisc.h gtkwidget.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h gtkalignment.h gtkbin.h \
-- gtkcontainer.h gtkaspectframe.h gtkframe.h gtkarrow.h \
-- gtkbindings.h gtkbox.h gtkbbox.h gtkbutton.h gtkcalendar.h \
-- gtksignal.h gtkmarshal.h gtkcheckbutton.h gtktogglebutton.h \
-- gtkcheckmenuitem.h gtkmenuitem.h gtkitem.h gtkclist.h \
-- gtkhscrollbar.h gtkscrollbar.h gtkrange.h gtkvscrollbar.h \
-- gtkcolorsel.h gtkwindow.h gtkvbox.h gtkpreview.h gtkentry.h \
-- gtkeditable.h gtkhbox.h gtkmain.h gtkscale.h gtkhscale.h \
-- gtktable.h gtkeventbox.h gtkcombo.h gtkcompat.h gtkctree.h \
-- gtkcurve.h gtkdrawingarea.h gtkdialog.h gtkdnd.h gtkselection.h \
-- gtkfeatures.h gtkfilesel.h gtkfixed.h gtkfontsel.h \
-- gtknotebook.h gtkgamma.h gtkgc.h gtkhandlebox.h gtkhbbox.h \
-- gtkhpaned.h gtkpaned.h gtkhruler.h gtkruler.h gtkhseparator.h \
-- gtkseparator.h gtkimage.h gtkinputdialog.h gtkitemfactory.h \
-- gtkmenufactory.h gtklayout.h gtklist.h gtklistitem.h gtkmenu.h \
-- gtkmenushell.h gtkmenubar.h gtkoptionmenu.h gtkpacker.h \
-- gtkpixmap.h gtkplug.h gtkprogress.h gtkprogressbar.h \
-- gtkradiobutton.h gtkradiomenuitem.h gtkrc.h gtkscrolledwindow.h \
-- gtkviewport.h gtksocket.h gtkspinbutton.h gtkstatusbar.h \
-- gtktearoffmenuitem.h gtktext.h gtkthemes.h gtktipsquery.h \
-- gtktoolbar.h gtktooltips.h gtktree.h gtktreeitem.h gtkvbbox.h \
-- gtkvpaned.h gtkvruler.h gtkvscale.h gtkvseparator.h
--testrgb.o: testrgb.c gtk.h ../gdk/gdk.h ../gdk/gdktypes.h \
-- ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkaccelgroup.h gtkobject.h \
-- gtkarg.h gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkaccellabel.h gtklabel.h gtkmisc.h gtkwidget.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h gtkalignment.h gtkbin.h \
-- gtkcontainer.h gtkaspectframe.h gtkframe.h gtkarrow.h \
-- gtkbindings.h gtkbox.h gtkbbox.h gtkbutton.h gtkcalendar.h \
-- gtksignal.h gtkmarshal.h gtkcheckbutton.h gtktogglebutton.h \
-- gtkcheckmenuitem.h gtkmenuitem.h gtkitem.h gtkclist.h \
-- gtkhscrollbar.h gtkscrollbar.h gtkrange.h gtkvscrollbar.h \
-- gtkcolorsel.h gtkwindow.h gtkvbox.h gtkpreview.h gtkentry.h \
-- gtkeditable.h gtkhbox.h gtkmain.h gtkscale.h gtkhscale.h \
-- gtktable.h gtkeventbox.h gtkcombo.h gtkcompat.h gtkctree.h \
-- gtkcurve.h gtkdrawingarea.h gtkdialog.h gtkdnd.h gtkselection.h \
-- gtkfeatures.h gtkfilesel.h gtkfixed.h gtkfontsel.h \
-- gtknotebook.h gtkgamma.h gtkgc.h gtkhandlebox.h gtkhbbox.h \
-- gtkhpaned.h gtkpaned.h gtkhruler.h gtkruler.h gtkhseparator.h \
-- gtkseparator.h gtkimage.h gtkinputdialog.h gtkitemfactory.h \
-- gtkmenufactory.h gtklayout.h gtklist.h gtklistitem.h gtkmenu.h \
-- gtkmenushell.h gtkmenubar.h gtkoptionmenu.h gtkpacker.h \
-- gtkpixmap.h gtkplug.h gtkprogress.h gtkprogressbar.h \
-- gtkradiobutton.h gtkradiomenuitem.h gtkrc.h gtkscrolledwindow.h \
-- gtkviewport.h gtksocket.h gtkspinbutton.h gtkstatusbar.h \
-- gtktearoffmenuitem.h gtktext.h gtkthemes.h gtktipsquery.h \
-- gtktoolbar.h gtktooltips.h gtktree.h gtktreeitem.h gtkvbbox.h \
-- gtkvpaned.h gtkvruler.h gtkvscale.h gtkvseparator.h
--testselection.o: testselection.c gtk.h ../gdk/gdk.h ../gdk/gdktypes.h \
-- ../gdk/gdkcursors.h ../gdk/gdkrgb.h gtkaccelgroup.h gtkobject.h \
-- gtkarg.h gtktypeutils.h gtktypebuiltins.h gtkenums.h gtkdebug.h \
-- gtkaccellabel.h gtklabel.h gtkmisc.h gtkwidget.h \
-- gtkadjustment.h gtkdata.h gtkstyle.h gtkalignment.h gtkbin.h \
-- gtkcontainer.h gtkaspectframe.h gtkframe.h gtkarrow.h \
-- gtkbindings.h gtkbox.h gtkbbox.h gtkbutton.h gtkcalendar.h \
-- gtksignal.h gtkmarshal.h gtkcheckbutton.h gtktogglebutton.h \
-- gtkcheckmenuitem.h gtkmenuitem.h gtkitem.h gtkclist.h \
-- gtkhscrollbar.h gtkscrollbar.h gtkrange.h gtkvscrollbar.h \
-- gtkcolorsel.h gtkwindow.h gtkvbox.h gtkpreview.h gtkentry.h \
-- gtkeditable.h gtkhbox.h gtkmain.h gtkscale.h gtkhscale.h \
-- gtktable.h gtkeventbox.h gtkcombo.h gtkcompat.h gtkctree.h \
-- gtkcurve.h gtkdrawingarea.h gtkdialog.h gtkdnd.h gtkselection.h \
-- gtkfeatures.h gtkfilesel.h gtkfixed.h gtkfontsel.h \
-- gtknotebook.h gtkgamma.h gtkgc.h gtkhandlebox.h gtkhbbox.h \
-- gtkhpaned.h gtkpaned.h gtkhruler.h gtkruler.h gtkhseparator.h \
-- gtkseparator.h gtkimage.h gtkinputdialog.h gtkitemfactory.h \
-- gtkmenufactory.h gtklayout.h gtklist.h gtklistitem.h gtkmenu.h \
-- gtkmenushell.h gtkmenubar.h gtkoptionmenu.h gtkpacker.h \
-- gtkpixmap.h gtkplug.h gtkprogress.h gtkprogressbar.h \
-- gtkradiobutton.h gtkradiomenuitem.h gtkrc.h gtkscrolledwindow.h \
-- gtkviewport.h gtksocket.h gtkspinbutton.h gtkstatusbar.h \
-- gtktearoffmenuitem.h gtktext.h gtkthemes.h gtktipsquery.h \
-- gtktoolbar.h gtktooltips.h gtktree.h gtktreeitem.h gtkvbbox.h \
-- gtkvpaned.h gtkvruler.h gtkvscale.h gtkvseparator.h
-
-+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-+
-+-include $(DEP_FILES)
-+
-+mostlyclean-depend:
-+
-+clean-depend:
-+
-+distclean-depend:
-+ -rm -rf .deps
-+
-+maintainer-clean-depend:
-+
-+%.o: %.c
-+ @echo '$(COMPILE) -c $<'; \
-+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm .deps/$(*F).pp
-+
-+%.lo: %.c
-+ @echo '$(LTCOMPILE) -c $<'; \
-+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
-+ < .deps/$(*F).pp > .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm -f .deps/$(*F).pp
- info-am:
- info: info-am
- dvi-am:
-@@ -1384,19 +619,20 @@
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
- mostlyclean-am: mostlyclean-libLTLIBRARIES mostlyclean-compile \
- mostlyclean-libtool mostlyclean-noinstPROGRAMS \
-- mostlyclean-tags mostlyclean-generic
-+ mostlyclean-tags mostlyclean-depend mostlyclean-generic
-
- mostlyclean: mostlyclean-am
-
- clean-am: clean-libLTLIBRARIES clean-compile clean-libtool \
-- clean-noinstPROGRAMS clean-tags clean-generic \
-- mostlyclean-am
-+ clean-noinstPROGRAMS clean-tags clean-depend \
-+ clean-generic mostlyclean-am
-
- clean: clean-am
-
- distclean-am: distclean-libLTLIBRARIES distclean-compile \
- distclean-libtool distclean-noinstPROGRAMS \
-- distclean-tags distclean-generic clean-am
-+ distclean-tags distclean-depend distclean-generic \
-+ clean-am
- -rm -f libtool
-
- distclean: distclean-am
-@@ -1404,7 +640,8 @@
- maintainer-clean-am: maintainer-clean-libLTLIBRARIES \
- maintainer-clean-compile maintainer-clean-libtool \
- maintainer-clean-noinstPROGRAMS maintainer-clean-tags \
-- maintainer-clean-generic distclean-am
-+ maintainer-clean-depend maintainer-clean-generic \
-+ distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-@@ -1420,10 +657,11 @@
- maintainer-clean-noinstPROGRAMS uninstall-gtkconfDATA \
- install-gtkconfDATA uninstall-libgtkincludeHEADERS \
- install-libgtkincludeHEADERS tags mostlyclean-tags distclean-tags \
--clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
--check-am installcheck-am installcheck install-exec-am install-exec \
--install-data-local install-data-am install-data install-am install \
--uninstall-local uninstall-am uninstall all-redirect all-am all \
-+clean-tags maintainer-clean-tags distdir mostlyclean-depend \
-+distclean-depend clean-depend maintainer-clean-depend info-am info \
-+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
-+install-exec install-data-local install-data-am install-data install-am \
-+install uninstall-local uninstall-am uninstall all-redirect all-am all \
- installdirs mostlyclean-generic distclean-generic clean-generic \
- maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-diff -urN gtk+-1.2.10.orig/ltmain.sh gtk+-1.2.10/ltmain.sh
---- gtk+-1.2.10.orig/ltmain.sh 2000-02-02 18:07:43.000000000 -0700
-+++ gtk+-1.2.10/ltmain.sh 2006-01-10 08:23:52.000000000 -0700
-@@ -1,7 +1,8 @@
- # ltmain.sh - Provide generalized library-building support services.
--# NOTE: Changing this file will not affect anything until you rerun ltconfig.
-+# NOTE: Changing this file will not affect anything until you rerun configure.
- #
--# Copyright (C) 1996-1999 Free Software Foundation, Inc.
-+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
-+# Free Software Foundation, Inc.
- # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
- #
- # This program is free software; you can redistribute it and/or modify
-@@ -16,13 +17,41 @@
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- #
- # As a special exception to the GNU General Public License, if you
- # distribute this file as part of a program that contains a
- # configuration script generated by Autoconf, you may include it under
- # the same distribution terms that you use for the rest of that program.
-
-+basename="s,^.*/,,g"
-+
-+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-+# is ksh but when the shell is invoked as "sh" and the current value of
-+# the _XPG environment variable is not equal to 1 (one), the special
-+# positional parameter $0, within a function call, is the name of the
-+# function.
-+progpath="$0"
-+
-+# The name of this program:
-+progname=`echo "$progpath" | $SED $basename`
-+modename="$progname"
-+
-+# Global variables:
-+EXIT_SUCCESS=0
-+EXIT_FAILURE=1
-+
-+PROGRAM=ltmain.sh
-+PACKAGE=libtool
-+VERSION="1.5.22 Debian 1.5.22-2"
-+TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
-+
-+# See if we are running on zsh, and set the options which allow our
-+# commands through without removal of \ escapes.
-+if test -n "${ZSH_VERSION+set}" ; then
-+ setopt NO_GLOB_SUBST
-+fi
-+
- # Check that we have a working $echo.
- if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
-@@ -35,7 +64,7 @@
- :
- else
- # Restart under the correct shell, and then maybe $echo will work.
-- exec $SHELL "$0" --no-reexec ${1+"$@"}
-+ exec $SHELL "$progpath" --no-reexec ${1+"$@"}
- fi
-
- if test "X$1" = X--fallback-echo; then
-@@ -44,19 +73,9 @@
- cat <<EOF
- $*
- EOF
-- exit 0
-+ exit $EXIT_SUCCESS
- fi
-
--# The name of this program.
--progname=`$echo "$0" | sed 's%^.*/%%'`
--modename="$progname"
--
--# Constants.
--PROGRAM=ltmain.sh
--PACKAGE=libtool
--VERSION=1.3.4
--TIMESTAMP=" (1.385.2.196 1999/12/07 21:47:57)"
--
- default_mode=
- help="Try \`$progname --help' for more information."
- magic="%%%MAGIC variable%%%"
-@@ -66,10 +85,20 @@
-
- # Sed substitution that helps us do robust quoting. It backslashifies
- # metacharacters that are still active within double-quoted strings.
--Xsed='sed -e 1s/^X//'
-+Xsed="${SED}"' -e 1s/^X//'
- sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
--SP2NL='tr \040 \012'
--NL2SP='tr \015\012 \040\040'
-+# test EBCDIC or ASCII
-+case `echo X|tr X '\101'` in
-+ A) # ASCII based system
-+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
-+ SP2NL='tr \040 \012'
-+ NL2SP='tr \015\012 \040\040'
-+ ;;
-+ *) # EBCDIC based system
-+ SP2NL='tr \100 \n'
-+ NL2SP='tr \r\n \100\100'
-+ ;;
-+esac
-
- # NLS nuisances.
- # Only set LANG and LC_ALL to C if already set.
-@@ -83,16 +112,15 @@
- save_LANG="$LANG"; LANG=C; export LANG
- fi
-
--if test "$LTCONFIG_VERSION" != "$VERSION"; then
-- echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
-- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
-- exit 1
--fi
-+# Make sure IFS has a sensible default
-+lt_nl='
-+'
-+IFS=" $lt_nl"
-
- if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-- echo "$modename: not configured to build any kind of library" 1>&2
-- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
-- exit 1
-+ $echo "$modename: not configured to build any kind of library" 1>&2
-+ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
-+ exit $EXIT_FAILURE
- fi
-
- # Global variables.
-@@ -104,25 +132,310 @@
- show="$echo"
- show_help=
- execute_dlfiles=
-+duplicate_deps=no
-+preserve_args=
- lo2o="s/\\.lo\$/.${objext}/"
- o2lo="s/\\.${objext}\$/.lo/"
-
-+#####################################
-+# Shell function definitions:
-+# This seems to be the best place for them
-+
-+# func_mktempdir [string]
-+# Make a temporary directory that won't clash with other running
-+# libtool processes, and avoids race conditions if possible. If
-+# given, STRING is the basename for that directory.
-+func_mktempdir ()
-+{
-+ my_template="${TMPDIR-/tmp}/${1-$progname}"
-+
-+ if test "$run" = ":"; then
-+ # Return a directory name, but don't create it in dry-run mode
-+ my_tmpdir="${my_template}-$$"
-+ else
-+
-+ # If mktemp works, use that first and foremost
-+ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
-+
-+ if test ! -d "$my_tmpdir"; then
-+ # Failing that, at least try and use $RANDOM to avoid a race
-+ my_tmpdir="${my_template}-${RANDOM-0}$$"
-+
-+ save_mktempdir_umask=`umask`
-+ umask 0077
-+ $mkdir "$my_tmpdir"
-+ umask $save_mktempdir_umask
-+ fi
-+
-+ # If we're not in dry-run mode, bomb out on failure
-+ test -d "$my_tmpdir" || {
-+ $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
-+ exit $EXIT_FAILURE
-+ }
-+ fi
-+
-+ $echo "X$my_tmpdir" | $Xsed
-+}
-+
-+
-+# func_win32_libid arg
-+# return the library type of file 'arg'
-+#
-+# Need a lot of goo to handle *both* DLLs and import libs
-+# Has to be a shell function in order to 'eat' the argument
-+# that is supplied when $file_magic_command is called.
-+func_win32_libid ()
-+{
-+ win32_libid_type="unknown"
-+ win32_fileres=`file -L $1 2>/dev/null`
-+ case $win32_fileres in
-+ *ar\ archive\ import\ library*) # definitely import
-+ win32_libid_type="x86 archive import"
-+ ;;
-+ *ar\ archive*) # could be an import, or static
-+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
-+ $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
-+ win32_nmres=`eval $NM -f posix -A $1 | \
-+ $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
-+ case $win32_nmres in
-+ import*) win32_libid_type="x86 archive import";;
-+ *) win32_libid_type="x86 archive static";;
-+ esac
-+ fi
-+ ;;
-+ *DLL*)
-+ win32_libid_type="x86 DLL"
-+ ;;
-+ *executable*) # but shell scripts are "executable" too...
-+ case $win32_fileres in
-+ *MS\ Windows\ PE\ Intel*)
-+ win32_libid_type="x86 DLL"
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ $echo $win32_libid_type
-+}
-+
-+
-+# func_infer_tag arg
-+# Infer tagged configuration to use if any are available and
-+# if one wasn't chosen via the "--tag" command line option.
-+# Only attempt this if the compiler in the base compile
-+# command doesn't match the default compiler.
-+# arg is usually of the form 'gcc ...'
-+func_infer_tag ()
-+{
-+ if test -n "$available_tags" && test -z "$tagname"; then
-+ CC_quoted=
-+ for arg in $CC; do
-+ case $arg in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
-+ arg="\"$arg\""
-+ ;;
-+ esac
-+ CC_quoted="$CC_quoted $arg"
-+ done
-+ case $@ in
-+ # Blanks in the command may have been stripped by the calling shell,
-+ # but not from the CC environment variable when configure was run.
-+ " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
-+ # Blanks at the start of $base_compile will cause this to fail
-+ # if we don't check for them as well.
-+ *)
-+ for z in $available_tags; do
-+ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
-+ # Evaluate the configuration.
-+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
-+ CC_quoted=
-+ for arg in $CC; do
-+ # Double-quote args containing other shell metacharacters.
-+ case $arg in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
-+ arg="\"$arg\""
-+ ;;
-+ esac
-+ CC_quoted="$CC_quoted $arg"
-+ done
-+ case "$@ " in
-+ " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
-+ # The compiler in the base compile command matches
-+ # the one in the tagged configuration.
-+ # Assume this is the tagged configuration we want.
-+ tagname=$z
-+ break
-+ ;;
-+ esac
-+ fi
-+ done
-+ # If $tagname still isn't set, then no tagged configuration
-+ # was found and let the user know that the "--tag" command
-+ # line option must be used.
-+ if test -z "$tagname"; then
-+ $echo "$modename: unable to infer tagged configuration"
-+ $echo "$modename: specify a tag with \`--tag'" 1>&2
-+ exit $EXIT_FAILURE
-+# else
-+# $echo "$modename: using $tagname tagged configuration"
-+ fi
-+ ;;
-+ esac
-+ fi
-+}
-+
-+
-+# func_extract_an_archive dir oldlib
-+func_extract_an_archive ()
-+{
-+ f_ex_an_ar_dir="$1"; shift
-+ f_ex_an_ar_oldlib="$1"
-+
-+ $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
-+ $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
-+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
-+ :
-+ else
-+ $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
-+ exit $EXIT_FAILURE
-+ fi
-+}
-+
-+# func_extract_archives gentop oldlib ...
-+func_extract_archives ()
-+{
-+ my_gentop="$1"; shift
-+ my_oldlibs=${1+"$@"}
-+ my_oldobjs=""
-+ my_xlib=""
-+ my_xabs=""
-+ my_xdir=""
-+ my_status=""
-+
-+ $show "${rm}r $my_gentop"
-+ $run ${rm}r "$my_gentop"
-+ $show "$mkdir $my_gentop"
-+ $run $mkdir "$my_gentop"
-+ my_status=$?
-+ if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
-+ exit $my_status
-+ fi
-+
-+ for my_xlib in $my_oldlibs; do
-+ # Extract the objects.
-+ case $my_xlib in
-+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
-+ *) my_xabs=`pwd`"/$my_xlib" ;;
-+ esac
-+ my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
-+ my_xdir="$my_gentop/$my_xlib"
-+
-+ $show "${rm}r $my_xdir"
-+ $run ${rm}r "$my_xdir"
-+ $show "$mkdir $my_xdir"
-+ $run $mkdir "$my_xdir"
-+ exit_status=$?
-+ if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
-+ exit $exit_status
-+ fi
-+ case $host in
-+ *-darwin*)
-+ $show "Extracting $my_xabs"
-+ # Do not bother doing anything if just a dry run
-+ if test -z "$run"; then
-+ darwin_orig_dir=`pwd`
-+ cd $my_xdir || exit $?
-+ darwin_archive=$my_xabs
-+ darwin_curdir=`pwd`
-+ darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
-+ darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
-+ if test -n "$darwin_arches"; then
-+ darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
-+ darwin_arch=
-+ $show "$darwin_base_archive has multiple architectures $darwin_arches"
-+ for darwin_arch in $darwin_arches ; do
-+ mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-+ lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
-+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
-+ cd "$darwin_curdir"
-+ $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
-+ done # $darwin_arches
-+ ## Okay now we have a bunch of thin objects, gotta fatten them up :)
-+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
-+ darwin_file=
-+ darwin_files=
-+ for darwin_file in $darwin_filelist; do
-+ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
-+ lipo -create -output "$darwin_file" $darwin_files
-+ done # $darwin_filelist
-+ ${rm}r unfat-$$
-+ cd "$darwin_orig_dir"
-+ else
-+ cd "$darwin_orig_dir"
-+ func_extract_an_archive "$my_xdir" "$my_xabs"
-+ fi # $darwin_arches
-+ fi # $run
-+ ;;
-+ *)
-+ func_extract_an_archive "$my_xdir" "$my_xabs"
-+ ;;
-+ esac
-+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-+ done
-+ func_extract_archives_result="$my_oldobjs"
-+}
-+# End of Shell function definitions
-+#####################################
-+
-+# Darwin sucks
-+eval std_shrext=\"$shrext_cmds\"
-+
-+disable_libs=no
-+
- # Parse our command line options once, thoroughly.
--while test $# -gt 0
-+while test "$#" -gt 0
- do
- arg="$1"
- shift
-
-- case "$arg" in
-+ case $arg in
- -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
- *) optarg= ;;
- esac
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
-- case "$prev" in
-+ case $prev in
- execute_dlfiles)
-- eval "$prev=\"\$$prev \$arg\""
-+ execute_dlfiles="$execute_dlfiles $arg"
-+ ;;
-+ tag)
-+ tagname="$arg"
-+ preserve_args="${preserve_args}=$arg"
-+
-+ # Check whether tagname contains only valid characters
-+ case $tagname in
-+ *[!-_A-Za-z0-9,/]*)
-+ $echo "$progname: invalid tag name: $tagname" 1>&2
-+ exit $EXIT_FAILURE
-+ ;;
-+ esac
-+
-+ case $tagname in
-+ CC)
-+ # Don't test for the "default" C tag, as we know, it's there, but
-+ # not specially marked.
-+ ;;
-+ *)
-+ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
-+ taglist="$taglist $tagname"
-+ # Evaluate the configuration.
-+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
-+ else
-+ $echo "$progname: ignoring unknown tag $tagname" 1>&2
-+ fi
-+ ;;
-+ esac
- ;;
- *)
- eval "$prev=\$arg"
-@@ -135,24 +448,33 @@
- fi
-
- # Have we seen a non-optional argument yet?
-- case "$arg" in
-+ case $arg in
- --help)
- show_help=yes
- ;;
-
- --version)
-- echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
-- exit 0
-+ $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
-+ $echo
-+ $echo "Copyright (C) 2005 Free Software Foundation, Inc."
-+ $echo "This is free software; see the source for copying conditions. There is NO"
-+ $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-+ exit $?
- ;;
-
- --config)
-- sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0
-- exit 0
-+ ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
-+ # Now print the configurations for the tags.
-+ for tagname in $taglist; do
-+ ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
-+ done
-+ exit $?
- ;;
-
- --debug)
-- echo "$progname: enabling shell trace mode"
-+ $echo "$progname: enabling shell trace mode"
- set -x
-+ preserve_args="$preserve_args $arg"
- ;;
-
- --dry-run | -n)
-@@ -160,18 +482,18 @@
- ;;
-
- --features)
-- echo "host: $host"
-+ $echo "host: $host"
- if test "$build_libtool_libs" = yes; then
-- echo "enable shared libraries"
-+ $echo "enable shared libraries"
- else
-- echo "disable shared libraries"
-+ $echo "disable shared libraries"
- fi
- if test "$build_old_libs" = yes; then
-- echo "enable static libraries"
-+ $echo "enable static libraries"
- else
-- echo "disable static libraries"
-+ $echo "disable static libraries"
- fi
-- exit 0
-+ exit $?
- ;;
-
- --finish) mode="finish" ;;
-@@ -179,8 +501,23 @@
- --mode) prevopt="--mode" prev=mode ;;
- --mode=*) mode="$optarg" ;;
-
-+ --preserve-dup-deps) duplicate_deps="yes" ;;
-+
- --quiet | --silent)
- show=:
-+ preserve_args="$preserve_args $arg"
-+ ;;
-+
-+ --tag)
-+ prevopt="--tag"
-+ prev=tag
-+ preserve_args="$preserve_args --tag"
-+ ;;
-+ --tag=*)
-+ set tag "$optarg" ${1+"$@"}
-+ shift
-+ prev=tag
-+ preserve_args="$preserve_args --tag"
- ;;
-
- -dlopen)
-@@ -191,7 +528,7 @@
- -*)
- $echo "$modename: unrecognized option \`$arg'" 1>&2
- $echo "$help" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- ;;
-
- *)
-@@ -204,19 +541,38 @@
- if test -n "$prevopt"; then
- $echo "$modename: option \`$prevopt' requires an argument" 1>&2
- $echo "$help" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- fi
-
-+case $disable_libs in
-+no)
-+ ;;
-+shared)
-+ build_libtool_libs=no
-+ build_old_libs=yes
-+ ;;
-+static)
-+ build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
-+ ;;
-+esac
-+
-+# If this variable is set in any of the actions, the command in it
-+# will be execed at the end. This prevents here-documents from being
-+# left over by shells.
-+exec_cmd=
-+
- if test -z "$show_help"; then
-
- # Infer the operation mode.
- if test -z "$mode"; then
-- case "$nonopt" in
-- *cc | *++ | gcc* | *-gcc*)
-+ $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
-+ $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
-+ case $nonopt in
-+ *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
- mode=link
- for arg
- do
-- case "$arg" in
-+ case $arg in
- -c)
- mode=compile
- break
-@@ -253,7 +609,7 @@
- if test -n "$execute_dlfiles" && test "$mode" != execute; then
- $echo "$modename: unrecognized option \`-dlopen'" 1>&2
- $echo "$help" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- fi
-
- # Change the help message to a mode-specific one.
-@@ -261,140 +617,233 @@
- help="Try \`$modename --help --mode=$mode' for more information."
-
- # These modes are in order of execution frequency so that they run quickly.
-- case "$mode" in
-+ case $mode in
- # libtool compile mode
- compile)
- modename="$modename: compile"
- # Get the compilation command and the source file.
- base_compile=
-- lastarg=
-- srcfile="$nonopt"
-+ srcfile="$nonopt" # always keep a non-empty value in "srcfile"
-+ suppress_opt=yes
- suppress_output=
-+ arg_mode=normal
-+ libobj=
-+ later=
-
-- user_target=no
- for arg
- do
-- # Accept any command-line options.
-- case "$arg" in
-- -o)
-- if test "$user_target" != "no"; then
-- $echo "$modename: you cannot specify \`-o' more than once" 1>&2
-- exit 1
-- fi
-- user_target=next
-- ;;
--
-- -static)
-- build_old_libs=yes
-- continue
-+ case $arg_mode in
-+ arg )
-+ # do not "continue". Instead, add this to base_compile
-+ lastarg="$arg"
-+ arg_mode=normal
- ;;
-- esac
-
-- case "$user_target" in
-- next)
-- # The next one is the -o target name
-- user_target=yes
-- continue
-- ;;
-- yes)
-- # We got the output file
-- user_target=set
-+ target )
- libobj="$arg"
-+ arg_mode=normal
- continue
- ;;
-- esac
-
-- # Accept the current argument as the source file.
-- lastarg="$srcfile"
-- srcfile="$arg"
-+ normal )
-+ # Accept any command-line options.
-+ case $arg in
-+ -o)
-+ if test -n "$libobj" ; then
-+ $echo "$modename: you cannot specify \`-o' more than once" 1>&2
-+ exit $EXIT_FAILURE
-+ fi
-+ arg_mode=target
-+ continue
-+ ;;
-
-- # Aesthetically quote the previous argument.
-+ -static | -prefer-pic | -prefer-non-pic)
-+ later="$later $arg"
-+ continue
-+ ;;
-
-- # Backslashify any backslashes, double quotes, and dollar signs.
-- # These are the only characters that are still specially
-- # interpreted inside of double-quoted scrings.
-+ -no-suppress)
-+ suppress_opt=no
-+ continue
-+ ;;
-+
-+ -Xcompiler)
-+ arg_mode=arg # the next one goes into the "base_compile" arg list
-+ continue # The current "srcfile" will either be retained or
-+ ;; # replaced later. I would guess that would be a bug.
-+
-+ -Wc,*)
-+ args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
-+ lastarg=
-+ save_ifs="$IFS"; IFS=','
-+ for arg in $args; do
-+ IFS="$save_ifs"
-+
-+ # Double-quote args containing other shell metacharacters.
-+ # Many Bourne shells cannot handle close brackets correctly
-+ # in scan sets, so we specify it separately.
-+ case $arg in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
-+ arg="\"$arg\""
-+ ;;
-+ esac
-+ lastarg="$lastarg $arg"
-+ done
-+ IFS="$save_ifs"
-+ lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
-+
-+ # Add the arguments to base_compile.
-+ base_compile="$base_compile $lastarg"
-+ continue
-+ ;;
-+
-+ * )
-+ # Accept the current argument as the source file.
-+ # The previous "srcfile" becomes the current argument.
-+ #
-+ lastarg="$srcfile"
-+ srcfile="$arg"
-+ ;;
-+ esac # case $arg
-+ ;;
-+ esac # case $arg_mode
-+
-+ # Aesthetically quote the previous argument.
- lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
-+ case $lastarg in
- # Double-quote args containing other shell metacharacters.
-- # Many Bourne shells cannot handle close brackets correctly in scan
-- # sets, so we specify it separately.
-- case "$lastarg" in
-- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
-+ # Many Bourne shells cannot handle close brackets correctly
-+ # in scan sets, and some SunOS ksh mistreat backslash-escaping
-+ # in scan sets (worked around with variable expansion),
-+ # and furthermore cannot handle '|' '&' '(' ')' in scan sets
-+ # at all, so we specify them separately.
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- lastarg="\"$lastarg\""
- ;;
- esac
-
-- # Add the previous argument to base_compile.
-- if test -z "$base_compile"; then
-- base_compile="$lastarg"
-- else
-- base_compile="$base_compile $lastarg"
-- fi
-- done
-+ base_compile="$base_compile $lastarg"
-+ done # for arg
-
-- case "$user_target" in
-- set)
-+ case $arg_mode in
-+ arg)
-+ $echo "$modename: you must specify an argument for -Xcompile"
-+ exit $EXIT_FAILURE
- ;;
-- no)
-- # Get the name of the library object.
-- libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
-+ target)
-+ $echo "$modename: you must specify a target with \`-o'" 1>&2
-+ exit $EXIT_FAILURE
- ;;
- *)
-- $echo "$modename: you must specify a target with \`-o'" 1>&2
-- exit 1
-+ # Get the name of the library object.
-+ [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
- ;;
- esac
-
- # Recognize several different file suffixes.
- # If the user specifies -o file.o, it is replaced with file.lo
-- xform='[cCFSfmso]'
-- case "$libobj" in
-+ xform='[cCFSifmso]'
-+ case $libobj in
- *.ada) xform=ada ;;
- *.adb) xform=adb ;;
- *.ads) xform=ads ;;
- *.asm) xform=asm ;;
- *.c++) xform=c++ ;;
- *.cc) xform=cc ;;
-+ *.ii) xform=ii ;;
-+ *.class) xform=class ;;
- *.cpp) xform=cpp ;;
- *.cxx) xform=cxx ;;
- *.f90) xform=f90 ;;
- *.for) xform=for ;;
-+ *.java) xform=java ;;
- esac
-
- libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
-- case "$libobj" in
-+ case $libobj in
- *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
- *)
- $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- ;;
- esac
-
-+ func_infer_tag $base_compile
-+
-+ for arg in $later; do
-+ case $arg in
-+ -static)
-+ build_old_libs=yes
-+ continue
-+ ;;
-+
-+ -prefer-pic)
-+ pic_mode=yes
-+ continue
-+ ;;
-+
-+ -prefer-non-pic)
-+ pic_mode=no
-+ continue
-+ ;;
-+ esac
-+ done
-+
-+ qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
-+ case $qlibobj in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
-+ qlibobj="\"$qlibobj\"" ;;
-+ esac
-+ test "X$libobj" != "X$qlibobj" \
-+ && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \
-+ && $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
-+ objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-+ xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-+ if test "X$xdir" = "X$obj"; then
-+ xdir=
-+ else
-+ xdir=$xdir/
-+ fi
-+ lobj=${xdir}$objdir/$objname
-+
- if test -z "$base_compile"; then
- $echo "$modename: you must specify a compilation command" 1>&2
- $echo "$help" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- fi
-
- # Delete any leftover library objects.
- if test "$build_old_libs" = yes; then
-- removelist="$obj $libobj"
-+ removelist="$obj $lobj $libobj ${libobj}T"
- else
-- removelist="$libobj"
-+ removelist="$lobj $libobj ${libobj}T"
- fi
-
- $run $rm $removelist
-- trap "$run $rm $removelist; exit 1" 1 2 15
-+ trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
-+
-+ # On Cygwin there's no "real" PIC flag so we must build both object types
-+ case $host_os in
-+ cygwin* | mingw* | pw32* | os2*)
-+ pic_mode=default
-+ ;;
-+ esac
-+ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
-+ # non-PIC code in shared libraries is not supported
-+ pic_mode=default
-+ fi
-
- # Calculate the filename of the output object if compiler does
- # not support -o with -c
- if test "$compiler_c_o" = no; then
-- output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext}
-+ output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
- lockfile="$output_obj.lock"
- removelist="$removelist $output_obj $lockfile"
-- trap "$run $rm $removelist; exit 1" 1 2 15
-+ trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
- else
-+ output_obj=
- need_locks=no
- lockfile=
- fi
-@@ -402,13 +851,13 @@
- # Lock this critical section if it is needed
- # We use this script file to make the link, it avoids creating a new file
- if test "$need_locks" = yes; then
-- until ln "$0" "$lockfile" 2>/dev/null; do
-+ until $run ln "$progpath" "$lockfile" 2>/dev/null; do
- $show "Waiting for $lockfile to be removed"
- sleep 2
- done
- elif test "$need_locks" = warn; then
- if test -f "$lockfile"; then
-- echo "\
-+ $echo "\
- *** ERROR, $lockfile exists and contains:
- `cat $lockfile 2>/dev/null`
-
-@@ -420,63 +869,72 @@
- compiler."
-
- $run $rm $removelist
-- exit 1
-+ exit $EXIT_FAILURE
- fi
-- echo $srcfile > "$lockfile"
-+ $echo "$srcfile" > "$lockfile"
- fi
-
- if test -n "$fix_srcfile_path"; then
- eval srcfile=\"$fix_srcfile_path\"
- fi
-+ qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
-+ case $qsrcfile in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
-+ qsrcfile="\"$qsrcfile\"" ;;
-+ esac
-+
-+ $run $rm "$libobj" "${libobj}T"
-+
-+ # Create a libtool object file (analogous to a ".la" file),
-+ # but don't create it if we're doing a dry run.
-+ test -z "$run" && cat > ${libobj}T <<EOF
-+# $libobj - a libtool object file
-+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-+#
-+# Please DO NOT delete this file!
-+# It is necessary for linking the library.
-+
-+# Name of the PIC object.
-+EOF
-
- # Only build a PIC object if we are building libtool libraries.
- if test "$build_libtool_libs" = yes; then
- # Without this assignment, base_compile gets emptied.
- fbsd_hideous_sh_bug=$base_compile
-
-- # All platforms use -DPIC, to notify preprocessed assembler code.
-- command="$base_compile $srcfile $pic_flag -DPIC"
-- if test "$build_old_libs" = yes; then
-- lo_libobj="$libobj"
-- dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
-- if test "X$dir" = "X$libobj"; then
-- dir="$objdir"
-- else
-- dir="$dir/$objdir"
-- fi
-- libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
-+ if test "$pic_mode" != no; then
-+ command="$base_compile $qsrcfile $pic_flag"
-+ else
-+ # Don't build PIC code
-+ command="$base_compile $qsrcfile"
-+ fi
-
-- if test -d "$dir"; then
-- $show "$rm $libobj"
-- $run $rm $libobj
-- else
-- $show "$mkdir $dir"
-- $run $mkdir $dir
-- status=$?
-- if test $status -ne 0 && test ! -d $dir; then
-- exit $status
-- fi
-+ if test ! -d "${xdir}$objdir"; then
-+ $show "$mkdir ${xdir}$objdir"
-+ $run $mkdir ${xdir}$objdir
-+ exit_status=$?
-+ if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
-+ exit $exit_status
- fi
- fi
-- if test "$compiler_o_lo" = yes; then
-- output_obj="$libobj"
-- command="$command -o $output_obj"
-- elif test "$compiler_c_o" = yes; then
-- output_obj="$obj"
-- command="$command -o $output_obj"
-+
-+ if test -z "$output_obj"; then
-+ # Place PIC objects in $objdir
-+ command="$command -o $lobj"
- fi
-
-- $run $rm "$output_obj"
-+ $run $rm "$lobj" "$output_obj"
-+
- $show "$command"
- if $run eval "$command"; then :
- else
- test -n "$output_obj" && $run $rm $removelist
-- exit 1
-+ exit $EXIT_FAILURE
- fi
-
- if test "$need_locks" = warn &&
-- test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
-- echo "\
-+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-+ $echo "\
- *** ERROR, $lockfile contains:
- `cat $lockfile 2>/dev/null`
-
-@@ -491,13 +949,13 @@
- compiler."
-
- $run $rm $removelist
-- exit 1
-+ exit $EXIT_FAILURE
- fi
-
- # Just move the object if needed, then go on to compile the next one
-- if test x"$output_obj" != x"$libobj"; then
-- $show "$mv $output_obj $libobj"
-- if $run $mv $output_obj $libobj; then :
-+ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
-+ $show "$mv $output_obj $lobj"
-+ if $run $mv $output_obj $lobj; then :
- else
- error=$?
- $run $rm $removelist
-@@ -505,66 +963,50 @@
- fi
- fi
-
-- # If we have no pic_flag, then copy the object into place and finish.
-- if test -z "$pic_flag" && test "$build_old_libs" = yes; then
-- # Rename the .lo from within objdir to obj
-- if test -f $obj; then
-- $show $rm $obj
-- $run $rm $obj
-- fi
-+ # Append the name of the PIC object to the libtool object file.
-+ test -z "$run" && cat >> ${libobj}T <<EOF
-+pic_object='$objdir/$objname'
-
-- $show "$mv $libobj $obj"
-- if $run $mv $libobj $obj; then :
-- else
-- error=$?
-- $run $rm $removelist
-- exit $error
-- fi
-+EOF
-
-- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-- if test "X$xdir" = "X$obj"; then
-- xdir="."
-- else
-- xdir="$xdir"
-- fi
-- baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
-- libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
-- # Now arrange that obj and lo_libobj become the same file
-- $show "(cd $xdir && $LN_S $baseobj $libobj)"
-- if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
-- exit 0
-- else
-- error=$?
-- $run $rm $removelist
-- exit $error
-- fi
-+ # Allow error messages only from the first compilation.
-+ if test "$suppress_opt" = yes; then
-+ suppress_output=' >/dev/null 2>&1'
- fi
-+ else
-+ # No PIC object so indicate it doesn't exist in the libtool
-+ # object file.
-+ test -z "$run" && cat >> ${libobj}T <<EOF
-+pic_object=none
-
-- # Allow error messages only from the first compilation.
-- suppress_output=' >/dev/null 2>&1'
-+EOF
- fi
-
- # Only build a position-dependent object if we build old libraries.
- if test "$build_old_libs" = yes; then
-- command="$base_compile $srcfile"
-+ if test "$pic_mode" != yes; then
-+ # Don't build PIC code
-+ command="$base_compile $qsrcfile"
-+ else
-+ command="$base_compile $qsrcfile $pic_flag"
-+ fi
- if test "$compiler_c_o" = yes; then
- command="$command -o $obj"
-- output_obj="$obj"
- fi
-
- # Suppress compiler output if we already did a PIC compilation.
- command="$command$suppress_output"
-- $run $rm "$output_obj"
-+ $run $rm "$obj" "$output_obj"
- $show "$command"
- if $run eval "$command"; then :
- else
- $run $rm $removelist
-- exit 1
-+ exit $EXIT_FAILURE
- fi
-
- if test "$need_locks" = warn &&
-- test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
-- echo "\
-+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-+ $echo "\
- *** ERROR, $lockfile contains:
- `cat $lockfile 2>/dev/null`
-
-@@ -579,11 +1021,11 @@
- compiler."
-
- $run $rm $removelist
-- exit 1
-+ exit $EXIT_FAILURE
- fi
-
- # Just move the object if needed
-- if test x"$output_obj" != x"$obj"; then
-+ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
- $show "$mv $output_obj $obj"
- if $run $mv $output_obj $obj; then :
- else
-@@ -593,40 +1035,42 @@
- fi
- fi
-
-- # Create an invalid libtool object if no PIC, so that we do not
-- # accidentally link it into a program.
-- if test "$build_libtool_libs" != yes; then
-- $show "echo timestamp > $libobj"
-- $run eval "echo timestamp > \$libobj" || exit $?
-- else
-- # Move the .lo from within objdir
-- $show "$mv $libobj $lo_libobj"
-- if $run $mv $libobj $lo_libobj; then :
-- else
-- error=$?
-- $run $rm $removelist
-- exit $error
-- fi
-- fi
-+ # Append the name of the non-PIC object the libtool object file.
-+ # Only append if the libtool object file exists.
-+ test -z "$run" && cat >> ${libobj}T <<EOF
-+# Name of the non-PIC object.
-+non_pic_object='$objname'
-+
-+EOF
-+ else
-+ # Append the name of the non-PIC object the libtool object file.
-+ # Only append if the libtool object file exists.
-+ test -z "$run" && cat >> ${libobj}T <<EOF
-+# Name of the non-PIC object.
-+non_pic_object=none
-+
-+EOF
- fi
-
-+ $run $mv "${libobj}T" "${libobj}"
-+
- # Unlock the critical section if it was locked
- if test "$need_locks" != no; then
-- $rm "$lockfile"
-+ $run $rm "$lockfile"
- fi
-
-- exit 0
-+ exit $EXIT_SUCCESS
- ;;
-
- # libtool link mode
-- link)
-+ link | relink)
- modename="$modename: link"
-- case "$host" in
-- *-*-cygwin* | *-*-mingw* | *-*-os2*)
-+ case $host in
-+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- # It is impossible to link a dll without this setting, and
- # we shouldn't force the makefile maintainer to figure out
- # which system we are compiling for in order to pass an extra
-- # flag for every libtool invokation.
-+ # flag for every libtool invocation.
- # allow_undefined=no
-
- # FIXME: Unfortunately, there are problems with the above when trying
-@@ -635,179 +1079,13 @@
- # -no-undefined on the libtool link line when we can be certain
- # that all symbols are satisfied, otherwise we get a static library.
- allow_undefined=yes
--
-- # This is a source program that is used to create dlls on Windows
-- # Don't remove nor modify the starting and closing comments
--# /* ltdll.c starts here */
--# #define WIN32_LEAN_AND_MEAN
--# #include <windows.h>
--# #undef WIN32_LEAN_AND_MEAN
--# #include <stdio.h>
--#
--# #ifndef __CYGWIN__
--# # ifdef __CYGWIN32__
--# # define __CYGWIN__ __CYGWIN32__
--# # endif
--# #endif
--#
--# #ifdef __cplusplus
--# extern "C" {
--# #endif
--# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
--# #ifdef __cplusplus
--# }
--# #endif
--#
--# #ifdef __CYGWIN__
--# #include <cygwin/cygwin_dll.h>
--# DECLARE_CYGWIN_DLL( DllMain );
--# #endif
--# HINSTANCE __hDllInstance_base;
--#
--# BOOL APIENTRY
--# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
--# {
--# __hDllInstance_base = hInst;
--# return TRUE;
--# }
--# /* ltdll.c ends here */
-- # This is a source program that is used to create import libraries
-- # on Windows for dlls which lack them. Don't remove nor modify the
-- # starting and closing comments
--# /* impgen.c starts here */
--# /* Copyright (C) 1999 Free Software Foundation, Inc.
--#
--# This file is part of GNU libtool.
--#
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2 of the License, or
--# (at your option) any later version.
--#
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--#
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--# */
--#
--# #include <stdio.h> /* for printf() */
--# #include <unistd.h> /* for open(), lseek(), read() */
--# #include <fcntl.h> /* for O_RDONLY, O_BINARY */
--# #include <string.h> /* for strdup() */
--#
--# static unsigned int
--# pe_get16 (fd, offset)
--# int fd;
--# int offset;
--# {
--# unsigned char b[2];
--# lseek (fd, offset, SEEK_SET);
--# read (fd, b, 2);
--# return b[0] + (b[1]<<8);
--# }
--#
--# static unsigned int
--# pe_get32 (fd, offset)
--# int fd;
--# int offset;
--# {
--# unsigned char b[4];
--# lseek (fd, offset, SEEK_SET);
--# read (fd, b, 4);
--# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
--# }
--#
--# static unsigned int
--# pe_as32 (ptr)
--# void *ptr;
--# {
--# unsigned char *b = ptr;
--# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
--# }
--#
--# int
--# main (argc, argv)
--# int argc;
--# char *argv[];
--# {
--# int dll;
--# unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
--# unsigned long export_rva, export_size, nsections, secptr, expptr;
--# unsigned long name_rvas, nexp;
--# unsigned char *expdata, *erva;
--# char *filename, *dll_name;
--#
--# filename = argv[1];
--#
--# dll = open(filename, O_RDONLY|O_BINARY);
--# if (!dll)
--# return 1;
--#
--# dll_name = filename;
--#
--# for (i=0; filename[i]; i++)
--# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':')
--# dll_name = filename + i +1;
--#
--# pe_header_offset = pe_get32 (dll, 0x3c);
--# opthdr_ofs = pe_header_offset + 4 + 20;
--# num_entries = pe_get32 (dll, opthdr_ofs + 92);
--#
--# if (num_entries < 1) /* no exports */
--# return 1;
--#
--# export_rva = pe_get32 (dll, opthdr_ofs + 96);
--# export_size = pe_get32 (dll, opthdr_ofs + 100);
--# nsections = pe_get16 (dll, pe_header_offset + 4 +2);
--# secptr = (pe_header_offset + 4 + 20 +
--# pe_get16 (dll, pe_header_offset + 4 + 16));
--#
--# expptr = 0;
--# for (i = 0; i < nsections; i++)
--# {
--# char sname[8];
--# unsigned long secptr1 = secptr + 40 * i;
--# unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
--# unsigned long vsize = pe_get32 (dll, secptr1 + 16);
--# unsigned long fptr = pe_get32 (dll, secptr1 + 20);
--# lseek(dll, secptr1, SEEK_SET);
--# read(dll, sname, 8);
--# if (vaddr <= export_rva && vaddr+vsize > export_rva)
--# {
--# expptr = fptr + (export_rva - vaddr);
--# if (export_rva + export_size > vaddr + vsize)
--# export_size = vsize - (export_rva - vaddr);
--# break;
--# }
--# }
--#
--# expdata = (unsigned char*)malloc(export_size);
--# lseek (dll, expptr, SEEK_SET);
--# read (dll, expdata, export_size);
--# erva = expdata - export_rva;
--#
--# nexp = pe_as32 (expdata+24);
--# name_rvas = pe_as32 (expdata+32);
--#
--# printf ("EXPORTS\n");
--# for (i = 0; i<nexp; i++)
--# {
--# unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
--# printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
--# }
--#
--# return 0;
--# }
--# /* impgen.c ends here */
- ;;
- *)
- allow_undefined=yes
- ;;
- esac
-+ libtool_args="$nonopt"
-+ base_compile="$nonopt $@"
- compile_command="$nonopt"
- finalize_command="$nonopt"
-
-@@ -818,18 +1096,13 @@
- convenience=
- old_convenience=
- deplibs=
-- linkopts=
-+ old_deplibs=
-+ compiler_flags=
-+ linker_flags=
-+ dllsearchpath=
-+ lib_search_path=`pwd`
-+ inst_prefix_dir=
-
-- if test -n "$shlibpath_var"; then
-- # get the directories listed in $shlibpath_var
-- eval lib_search_path=\`\$echo \"X \${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
-- else
-- lib_search_path=
-- fi
-- # now prepend the system-specific ones
-- eval lib_search_path=\"$sys_lib_search_path_spec\$lib_search_path\"
-- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
--
- avoid_version=no
- dlfiles=
- dlprefiles=
-@@ -839,10 +1112,13 @@
- export_symbols_regex=
- generated=
- libobjs=
-- link_against_libtool_libs=
- ltlibs=
- module=no
-+ no_install=no
- objs=
-+ non_pic_objects=
-+ notinst_path= # paths that contain not-installed libtool libraries
-+ precious_files_regex=
- prefer_static_libs=no
- preload=no
- prev=
-@@ -854,11 +1130,14 @@
- temp_rpath=
- thread_safe=no
- vinfo=
-+ vinfo_number=no
-+
-+ func_infer_tag $base_compile
-
- # We need to know -static, to get the right output filenames.
- for arg
- do
-- case "$arg" in
-+ case $arg in
- -all-static | -static)
- if test "X$arg" = "X-all-static"; then
- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-@@ -867,14 +1146,15 @@
- if test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
-+ prefer_static_libs=yes
- else
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
-+ prefer_static_libs=built
- fi
- build_libtool_libs=no
- build_old_libs=yes
-- prefer_static_libs=yes
- break
- ;;
- esac
-@@ -884,20 +1164,27 @@
- test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
- # Go through the arguments, transforming them on the way.
-- while test $# -gt 0; do
-+ while test "$#" -gt 0; do
- arg="$1"
- shift
-+ case $arg in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
-+ qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
-+ ;;
-+ *) qarg=$arg ;;
-+ esac
-+ libtool_args="$libtool_args $qarg"
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
-- case "$prev" in
-+ case $prev in
- output)
- compile_command="$compile_command @OUTPUT@"
- finalize_command="$finalize_command @OUTPUT@"
- ;;
- esac
-
-- case "$prev" in
-+ case $prev in
- dlfiles|dlprefiles)
- if test "$preload" = no; then
- # Add the symbol object into the linking commands.
-@@ -905,7 +1192,7 @@
- finalize_command="$finalize_command @SYMFILE@"
- preload=yes
- fi
-- case "$arg" in
-+ case $arg in
- *.la | *.lo) ;; # We handle these cases below.
- force)
- if test "$dlself" = no; then
-@@ -934,6 +1221,7 @@
- dlprefiles="$dlprefiles $arg"
- fi
- prev=
-+ continue
- ;;
- esac
- ;;
-@@ -941,7 +1229,7 @@
- export_symbols="$arg"
- if test ! -f "$arg"; then
- $echo "$modename: symbol file \`$arg' does not exist"
-- exit 1
-+ exit $EXIT_FAILURE
- fi
- prev=
- continue
-@@ -951,18 +1239,140 @@
- prev=
- continue
- ;;
-+ inst_prefix)
-+ inst_prefix_dir="$arg"
-+ prev=
-+ continue
-+ ;;
-+ precious_regex)
-+ precious_files_regex="$arg"
-+ prev=
-+ continue
-+ ;;
- release)
- release="-$arg"
- prev=
- continue
- ;;
-+ objectlist)
-+ if test -f "$arg"; then
-+ save_arg=$arg
-+ moreargs=
-+ for fil in `cat $save_arg`
-+ do
-+# moreargs="$moreargs $fil"
-+ arg=$fil
-+ # A libtool-controlled object.
-+
-+ # Check to see that this really is a libtool object.
-+ if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-+ pic_object=
-+ non_pic_object=
-+
-+ # Read the .lo file
-+ # If there is no directory component, then add one.
-+ case $arg in
-+ */* | *\\*) . $arg ;;
-+ *) . ./$arg ;;
-+ esac
-+
-+ if test -z "$pic_object" || \
-+ test -z "$non_pic_object" ||
-+ test "$pic_object" = none && \
-+ test "$non_pic_object" = none; then
-+ $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-+ exit $EXIT_FAILURE
-+ fi
-+
-+ # Extract subdirectory from the argument.
-+ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-+ if test "X$xdir" = "X$arg"; then
-+ xdir=
-+ else
-+ xdir="$xdir/"
-+ fi
-+
-+ if test "$pic_object" != none; then
-+ # Prepend the subdirectory the object is found in.
-+ pic_object="$xdir$pic_object"
-+
-+ if test "$prev" = dlfiles; then
-+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-+ dlfiles="$dlfiles $pic_object"
-+ prev=
-+ continue
-+ else
-+ # If libtool objects are unsupported, then we need to preload.
-+ prev=dlprefiles
-+ fi
-+ fi
-+
-+ # CHECK ME: I think I busted this. -Ossama
-+ if test "$prev" = dlprefiles; then
-+ # Preload the old-style object.
-+ dlprefiles="$dlprefiles $pic_object"
-+ prev=
-+ fi
-+
-+ # A PIC object.
-+ libobjs="$libobjs $pic_object"
-+ arg="$pic_object"
-+ fi
-+
-+ # Non-PIC object.
-+ if test "$non_pic_object" != none; then
-+ # Prepend the subdirectory the object is found in.
-+ non_pic_object="$xdir$non_pic_object"
-+
-+ # A standard non-PIC object
-+ non_pic_objects="$non_pic_objects $non_pic_object"
-+ if test -z "$pic_object" || test "$pic_object" = none ; then
-+ arg="$non_pic_object"
-+ fi
-+ else
-+ # If the PIC object exists, use it instead.
-+ # $xdir was prepended to $pic_object above.
-+ non_pic_object="$pic_object"
-+ non_pic_objects="$non_pic_objects $non_pic_object"
-+ fi
-+ else
-+ # Only an error if not doing a dry-run.
-+ if test -z "$run"; then
-+ $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-+ exit $EXIT_FAILURE
-+ else
-+ # Dry-run case.
-+
-+ # Extract subdirectory from the argument.
-+ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-+ if test "X$xdir" = "X$arg"; then
-+ xdir=
-+ else
-+ xdir="$xdir/"
-+ fi
-+
-+ pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-+ non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-+ libobjs="$libobjs $pic_object"
-+ non_pic_objects="$non_pic_objects $non_pic_object"
-+ fi
-+ fi
-+ done
-+ else
-+ $echo "$modename: link input file \`$save_arg' does not exist"
-+ exit $EXIT_FAILURE
-+ fi
-+ arg=$save_arg
-+ prev=
-+ continue
-+ ;;
- rpath | xrpath)
- # We need an absolute path.
-- case "$arg" in
-+ case $arg in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- $echo "$modename: only absolute run-paths are allowed" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- ;;
- esac
- if test "$prev" = rpath; then
-@@ -979,17 +1389,52 @@
- prev=
- continue
- ;;
-+ xcompiler)
-+ compiler_flags="$compiler_flags $qarg"
-+ prev=
-+ compile_command="$compile_command $qarg"
-+ finalize_command="$finalize_command $qarg"
-+ continue
-+ ;;
-+ xlinker)
-+ linker_flags="$linker_flags $qarg"
-+ compiler_flags="$compiler_flags $wl$qarg"
-+ prev=
-+ compile_command="$compile_command $wl$qarg"
-+ finalize_command="$finalize_command $wl$qarg"
-+ continue
-+ ;;
-+ xcclinker)
-+ linker_flags="$linker_flags $qarg"
-+ compiler_flags="$compiler_flags $qarg"
-+ prev=
-+ compile_command="$compile_command $qarg"
-+ finalize_command="$finalize_command $qarg"
-+ continue
-+ ;;
-+ shrext)
-+ shrext_cmds="$arg"
-+ prev=
-+ continue
-+ ;;
-+ darwin_framework|darwin_framework_skip)
-+ test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
-+ compile_command="$compile_command $arg"
-+ finalize_command="$finalize_command $arg"
-+ prev=
-+ continue
-+ ;;
- *)
- eval "$prev=\"\$arg\""
- prev=
- continue
- ;;
- esac
-- fi
-+ fi # test -n "$prev"
-
- prevarg="$arg"
-
-- case "$arg" in
-+ case $arg in
- -all-static)
- if test -n "$link_static_flag"; then
- compile_command="$compile_command $link_static_flag"
-@@ -1026,8 +1471,8 @@
-
- -export-symbols | -export-symbols-regex)
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-- $echo "$modename: not more than one -exported-symbols argument allowed"
-- exit 1
-+ $echo "$modename: more than one -exported-symbols argument is not allowed"
-+ exit $EXIT_FAILURE
- fi
- if test "X$arg" = "X-export-symbols"; then
- prev=expsyms
-@@ -1037,58 +1482,129 @@
- continue
- ;;
-
-+ -framework|-arch|-isysroot)
-+ case " $CC " in
-+ *" ${arg} ${1} "* | *" ${arg} ${1} "*)
-+ prev=darwin_framework_skip ;;
-+ *) compiler_flags="$compiler_flags $arg"
-+ prev=darwin_framework ;;
-+ esac
-+ compile_command="$compile_command $arg"
-+ finalize_command="$finalize_command $arg"
-+ continue
-+ ;;
-+
-+ -inst-prefix-dir)
-+ prev=inst_prefix
-+ continue
-+ ;;
-+
-+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
-+ # so, if we see these flags be careful not to treat them like -L
-+ -L[A-Z][A-Z]*:*)
-+ case $with_gcc/$host in
-+ no/*-*-irix* | /*-*-irix*)
-+ compile_command="$compile_command $arg"
-+ finalize_command="$finalize_command $arg"
-+ ;;
-+ esac
-+ continue
-+ ;;
-+
- -L*)
- dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
- # We need an absolute path.
-- case "$dir" in
-+ case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
-- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
-- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
-+ $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
- absdir="$dir"
-+ notinst_path="$notinst_path $dir"
- fi
- dir="$absdir"
- ;;
- esac
-- case " $deplibs " in
-- *" $arg "*) ;;
-- *) deplibs="$deplibs $arg";;
-- esac
-- case " $lib_search_path " in
-- *" $dir "*) ;;
-- *) lib_search_path="$lib_search_path $dir";;
-+ case "$deplibs " in
-+ *" -L$dir "*) ;;
-+ *)
-+ deplibs="$deplibs -L$dir"
-+ lib_search_path="$lib_search_path $dir"
-+ ;;
- esac
-- case "$host" in
-- *-*-cygwin* | *-*-mingw* | *-*-os2*)
-- dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
-- case ":$dllsearchpath:" in
-- ::) dllsearchpath="$dllsearchdir";;
-- *":$dllsearchdir:"*) ;;
-- *) dllsearchpath="$dllsearchpath:$dllsearchdir";;
-+ case $host in
-+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-+ testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
-+ case :$dllsearchpath: in
-+ *":$dir:"*) ;;
-+ *) dllsearchpath="$dllsearchpath:$dir";;
-+ esac
-+ case :$dllsearchpath: in
-+ *":$testbindir:"*) ;;
-+ *) dllsearchpath="$dllsearchpath:$testbindir";;
- esac
- ;;
- esac
-+ continue
- ;;
-
- -l*)
-- if test "$arg" = "-lc"; then
-- case "$host" in
-- *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
-- # These systems don't actually have c library (as such)
-+ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
-+ case $host in
-+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
-+ # These systems don't actually have a C or math library (as such)
- continue
- ;;
-- esac
-- elif test "$arg" = "-lm"; then
-- case "$host" in
-- *-*-cygwin* | *-*-beos*)
-- # These systems don't actually have math library (as such)
-+ *-*-os2*)
-+ # These systems don't actually have a C library (as such)
-+ test "X$arg" = "X-lc" && continue
-+ ;;
-+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-+ # Do not include libc due to us having libc/libc_r.
-+ test "X$arg" = "X-lc" && continue
-+ ;;
-+ *-*-rhapsody* | *-*-darwin1.[012])
-+ # Rhapsody C and math libraries are in the System framework
-+ deplibs="$deplibs -framework System"
- continue
- ;;
-+ *-*-sco3.2v5* | *-*-sco5v6*)
-+ # Causes problems with __ctype
-+ test "X$arg" = "X-lc" && continue
-+ ;;
-+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
-+ # Compiler inserts libc in the correct place for threads to work
-+ test "X$arg" = "X-lc" && continue
-+ ;;
- esac
-+ elif test "X$arg" = "X-lc_r"; then
-+ case $host in
-+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-+ # Do not include libc_r directly, use -pthread flag.
-+ continue
-+ ;;
-+ esac
- fi
- deplibs="$deplibs $arg"
-+ continue
-+ ;;
-+
-+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
-+ # classes, name mangling, and exception handling.
-+ -model)
-+ compile_command="$compile_command $arg"
-+ compiler_flags="$compiler_flags $arg"
-+ finalize_command="$finalize_command $arg"
-+ prev=xcompiler
-+ continue
-+ ;;
-+
-+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
-+ compiler_flags="$compiler_flags $arg"
-+ compile_command="$compile_command $arg"
-+ finalize_command="$finalize_command $arg"
-+ continue
- ;;
-
- -module)
-@@ -1096,13 +1612,74 @@
- continue
- ;;
-
-+ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
-+ # -r[0-9][0-9]* specifies the processor on the SGI compiler
-+ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
-+ # +DA*, +DD* enable 64-bit mode on the HP compiler
-+ # -q* pass through compiler args for the IBM compiler
-+ # -m* pass through architecture-specific compiler args for GCC
-+ # -m*, -t[45]*, -txscale* pass through architecture-specific
-+ # compiler args for GCC
-+ # -pg pass through profiling flag for GCC
-+ # @file GCC response files
-+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
-+ -t[45]*|-txscale*|@*)
-+
-+ # Unknown arguments in both finalize_command and compile_command need
-+ # to be aesthetically quoted because they are evaled later.
-+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-+ case $arg in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
-+ arg="\"$arg\""
-+ ;;
-+ esac
-+ compile_command="$compile_command $arg"
-+ finalize_command="$finalize_command $arg"
-+ compiler_flags="$compiler_flags $arg"
-+ continue
-+ ;;
-+
-+ -shrext)
-+ prev=shrext
-+ continue
-+ ;;
-+
-+ -no-fast-install)
-+ fast_install=no
-+ continue
-+ ;;
-+
-+ -no-install)
-+ case $host in
-+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-+ # The PATH hackery in wrapper scripts is required on Windows
-+ # in order for the loader to find any dlls it needs.
-+ $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
-+ $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
-+ fast_install=no
-+ ;;
-+ *) no_install=yes ;;
-+ esac
-+ continue
-+ ;;
-+
- -no-undefined)
- allow_undefined=no
- continue
- ;;
-
-+ -objectlist)
-+ prev=objectlist
-+ continue
-+ ;;
-+
- -o) prev=output ;;
-
-+ -precious-files-regex)
-+ prev=precious_regex
-+ continue
-+ ;;
-+
- -release)
- prev=release
- continue
-@@ -1121,11 +1698,11 @@
- -R*)
- dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
- # We need an absolute path.
-- case "$dir" in
-+ case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- $echo "$modename: only absolute run-paths are allowed" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- ;;
- esac
- case "$xrpath " in
-@@ -1136,11 +1713,11 @@
- ;;
-
- -static)
-- # If we have no pic_flag, then this is the same as -all-static.
-- if test -z "$pic_flag" && test -n "$link_static_flag"; then
-- compile_command="$compile_command $link_static_flag"
-- finalize_command="$finalize_command $link_static_flag"
-- fi
-+ # The effects of -static are defined in a previous loop.
-+ # We used to do the same as -all-static on platforms that
-+ # didn't have a PIC flag, but the assumption that the effects
-+ # would be equivalent was wrong. It would break on at least
-+ # Digital Unix and AIX.
- continue
- ;;
-
-@@ -1153,388 +1730,1335 @@
- prev=vinfo
- continue
- ;;
-+ -version-number)
-+ prev=vinfo
-+ vinfo_number=yes
-+ continue
-+ ;;
-+
-+ -Wc,*)
-+ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
-+ arg=
-+ save_ifs="$IFS"; IFS=','
-+ for flag in $args; do
-+ IFS="$save_ifs"
-+ case $flag in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
-+ flag="\"$flag\""
-+ ;;
-+ esac
-+ arg="$arg $wl$flag"
-+ compiler_flags="$compiler_flags $flag"
-+ done
-+ IFS="$save_ifs"
-+ arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
-+ ;;
-+
-+ -Wl,*)
-+ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
-+ arg=
-+ save_ifs="$IFS"; IFS=','
-+ for flag in $args; do
-+ IFS="$save_ifs"
-+ case $flag in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
-+ flag="\"$flag\""
-+ ;;
-+ esac
-+ arg="$arg $wl$flag"
-+ compiler_flags="$compiler_flags $wl$flag"
-+ linker_flags="$linker_flags $flag"
-+ done
-+ IFS="$save_ifs"
-+ arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
-+ ;;
-+
-+ -Xcompiler)
-+ prev=xcompiler
-+ continue
-+ ;;
-+
-+ -Xlinker)
-+ prev=xlinker
-+ continue
-+ ;;
-+
-+ -XCClinker)
-+ prev=xcclinker
-+ continue
-+ ;;
-
- # Some other compiler flag.
- -* | +*)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-- case "$arg" in
-- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
-+ case $arg in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- ;;
-
-- *.o | *.obj | *.a | *.lib)
-+ *.$objext)
- # A standard object.
- objs="$objs $arg"
- ;;
-
- *.lo)
-- # A library object.
-- if test "$prev" = dlfiles; then
-- dlfiles="$dlfiles $arg"
-- if test "$build_libtool_libs" = yes && test "$dlopen" = yes; then
-- prev=
-- continue
-+ # A libtool-controlled object.
-+
-+ # Check to see that this really is a libtool object.
-+ if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-+ pic_object=
-+ non_pic_object=
-+
-+ # Read the .lo file
-+ # If there is no directory component, then add one.
-+ case $arg in
-+ */* | *\\*) . $arg ;;
-+ *) . ./$arg ;;
-+ esac
-+
-+ if test -z "$pic_object" || \
-+ test -z "$non_pic_object" ||
-+ test "$pic_object" = none && \
-+ test "$non_pic_object" = none; then
-+ $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-+ exit $EXIT_FAILURE
-+ fi
-+
-+ # Extract subdirectory from the argument.
-+ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-+ if test "X$xdir" = "X$arg"; then
-+ xdir=
-+ else
-+ xdir="$xdir/"
-+ fi
-+
-+ if test "$pic_object" != none; then
-+ # Prepend the subdirectory the object is found in.
-+ pic_object="$xdir$pic_object"
-+
-+ if test "$prev" = dlfiles; then
-+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-+ dlfiles="$dlfiles $pic_object"
-+ prev=
-+ continue
-+ else
-+ # If libtool objects are unsupported, then we need to preload.
-+ prev=dlprefiles
-+ fi
-+ fi
-+
-+ # CHECK ME: I think I busted this. -Ossama
-+ if test "$prev" = dlprefiles; then
-+ # Preload the old-style object.
-+ dlprefiles="$dlprefiles $pic_object"
-+ prev=
-+ fi
-+
-+ # A PIC object.
-+ libobjs="$libobjs $pic_object"
-+ arg="$pic_object"
-+ fi
-+
-+ # Non-PIC object.
-+ if test "$non_pic_object" != none; then
-+ # Prepend the subdirectory the object is found in.
-+ non_pic_object="$xdir$non_pic_object"
-+
-+ # A standard non-PIC object
-+ non_pic_objects="$non_pic_objects $non_pic_object"
-+ if test -z "$pic_object" || test "$pic_object" = none ; then
-+ arg="$non_pic_object"
-+ fi
- else
-- # If libtool objects are unsupported, then we need to preload.
-- prev=dlprefiles
-+ # If the PIC object exists, use it instead.
-+ # $xdir was prepended to $pic_object above.
-+ non_pic_object="$pic_object"
-+ non_pic_objects="$non_pic_objects $non_pic_object"
- fi
-- fi
-+ else
-+ # Only an error if not doing a dry-run.
-+ if test -z "$run"; then
-+ $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-+ exit $EXIT_FAILURE
-+ else
-+ # Dry-run case.
-
-- if test "$prev" = dlprefiles; then
-- # Preload the old-style object.
-- dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
-- prev=
-+ # Extract subdirectory from the argument.
-+ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-+ if test "X$xdir" = "X$arg"; then
-+ xdir=
-+ else
-+ xdir="$xdir/"
-+ fi
-+
-+ pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-+ non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-+ libobjs="$libobjs $pic_object"
-+ non_pic_objects="$non_pic_objects $non_pic_object"
-+ fi
- fi
-- libobjs="$libobjs $arg"
-+ ;;
-+
-+ *.$libext)
-+ # An archive.
-+ deplibs="$deplibs $arg"
-+ old_deplibs="$old_deplibs $arg"
-+ continue
- ;;
-
- *.la)
- # A libtool-controlled library.
-
-- dlname=
-- libdir=
-- library_names=
-- old_library=
--
-- # Check to see that this really is a libtool archive.
-- if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-+ if test "$prev" = dlfiles; then
-+ # This library was specified with -dlopen.
-+ dlfiles="$dlfiles $arg"
-+ prev=
-+ elif test "$prev" = dlprefiles; then
-+ # The library was specified with -dlpreopen.
-+ dlprefiles="$dlprefiles $arg"
-+ prev=
- else
-- $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2
-- exit 1
-+ deplibs="$deplibs $arg"
- fi
-+ continue
-+ ;;
-
-- # If the library was installed with an old release of libtool,
-- # it will not redefine variable installed.
-- installed=yes
--
-- # Read the .la file
-- # If there is no directory component, then add one.
-- case "$arg" in
-- */* | *\\*) . $arg ;;
-- *) . ./$arg ;;
-+ # Some other compiler argument.
-+ *)
-+ # Unknown arguments in both finalize_command and compile_command need
-+ # to be aesthetically quoted because they are evaled later.
-+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-+ case $arg in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
-+ arg="\"$arg\""
-+ ;;
- esac
-+ ;;
-+ esac # arg
-
-- # Get the name of the library we link against.
-- linklib=
-- for l in $old_library $library_names; do
-- linklib="$l"
-- done
-+ # Now actually substitute the argument into the commands.
-+ if test -n "$arg"; then
-+ compile_command="$compile_command $arg"
-+ finalize_command="$finalize_command $arg"
-+ fi
-+ done # argument parsing loop
-
-- if test -z "$linklib"; then
-- $echo "$modename: cannot find name of link library for \`$arg'" 1>&2
-- exit 1
-- fi
-+ if test -n "$prev"; then
-+ $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
-+ $echo "$help" 1>&2
-+ exit $EXIT_FAILURE
-+ fi
-
-- # Find the relevant object directory and library name.
-- name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'`
-+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
-+ eval arg=\"$export_dynamic_flag_spec\"
-+ compile_command="$compile_command $arg"
-+ finalize_command="$finalize_command $arg"
-+ fi
-
-- if test "X$installed" = Xyes; then
-- dir="$libdir"
-- else
-- dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-- if test "X$dir" = "X$arg"; then
-- dir="$objdir"
-- else
-- dir="$dir/$objdir"
-- fi
-- fi
-+ oldlibs=
-+ # calculate the name of the file, without its directory
-+ outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
-+ libobjs_save="$libobjs"
-
-- if test -n "$dependency_libs"; then
-- # Extract -R and -L from dependency_libs
-- temp_deplibs=
-- for deplib in $dependency_libs; do
-- case "$deplib" in
-- -R*) temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
-- case " $rpath $xrpath " in
-- *" $temp_xrpath "*) ;;
-- *) xrpath="$xrpath $temp_xrpath";;
-- esac;;
-- -L*) case "$compile_command $temp_deplibs " in
-- *" $deplib "*) ;;
-- *) temp_deplibs="$temp_deplibs $deplib";;
-- esac
-- temp_dir=`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-- case " $lib_search_path " in
-- *" $temp_dir "*) ;;
-- *) lib_search_path="$lib_search_path $temp_dir";;
-- esac
-- ;;
-- *) temp_deplibs="$temp_deplibs $deplib";;
-- esac
-- done
-- dependency_libs="$temp_deplibs"
-- fi
-+ if test -n "$shlibpath_var"; then
-+ # get the directories listed in $shlibpath_var
-+ eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
-+ else
-+ shlib_search_path=
-+ fi
-+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
-+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
-- if test -z "$libdir"; then
-- # It is a libtool convenience library, so add in its objects.
-- convenience="$convenience $dir/$old_library"
-- old_convenience="$old_convenience $dir/$old_library"
-- deplibs="$deplibs$dependency_libs"
-- compile_command="$compile_command $dir/$old_library$dependency_libs"
-- finalize_command="$finalize_command $dir/$old_library$dependency_libs"
-- continue
-- fi
-+ output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
-+ if test "X$output_objdir" = "X$output"; then
-+ output_objdir="$objdir"
-+ else
-+ output_objdir="$output_objdir/$objdir"
-+ fi
-+ # Create the object directory.
-+ if test ! -d "$output_objdir"; then
-+ $show "$mkdir $output_objdir"
-+ $run $mkdir $output_objdir
-+ exit_status=$?
-+ if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
-+ exit $exit_status
-+ fi
-+ fi
-
-- # This library was specified with -dlopen.
-- if test "$prev" = dlfiles; then
-- dlfiles="$dlfiles $arg"
-- if test -z "$dlname" || test "$dlopen" != yes || test "$build_libtool_libs" = no; then
-- # If there is no dlname, no dlopen support or we're linking statically,
-- # we need to preload.
-- prev=dlprefiles
-- else
-- # We should not create a dependency on this library, but we
-- # may need any libraries it requires.
-- compile_command="$compile_command$dependency_libs"
-- finalize_command="$finalize_command$dependency_libs"
-- prev=
-- continue
-- fi
-- fi
-+ # Determine the type of output
-+ case $output in
-+ "")
-+ $echo "$modename: you must specify an output file" 1>&2
-+ $echo "$help" 1>&2
-+ exit $EXIT_FAILURE
-+ ;;
-+ *.$libext) linkmode=oldlib ;;
-+ *.lo | *.$objext) linkmode=obj ;;
-+ *.la) linkmode=lib ;;
-+ *) linkmode=prog ;; # Anything else should be a program.
-+ esac
-
-- # The library was specified with -dlpreopen.
-- if test "$prev" = dlprefiles; then
-- # Prefer using a static library (so that no silly _DYNAMIC symbols
-- # are required to link).
-- if test -n "$old_library"; then
-- dlprefiles="$dlprefiles $dir/$old_library"
-- else
-- dlprefiles="$dlprefiles $dir/$linklib"
-- fi
-- prev=
-- fi
-+ case $host in
-+ *cygwin* | *mingw* | *pw32*)
-+ # don't eliminate duplications in $postdeps and $predeps
-+ duplicate_compiler_generated_deps=yes
-+ ;;
-+ *)
-+ duplicate_compiler_generated_deps=$duplicate_deps
-+ ;;
-+ esac
-+ specialdeplibs=
-
-- if test -n "$library_names" &&
-- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
-- link_against_libtool_libs="$link_against_libtool_libs $arg"
-- if test -n "$shlibpath_var"; then
-- # Make sure the rpath contains only unique directories.
-- case "$temp_rpath " in
-- *" $dir "*) ;;
-- *) temp_rpath="$temp_rpath $dir" ;;
-- esac
-- fi
-+ libs=
-+ # Find all interdependent deplibs by searching for libraries
-+ # that are linked more than once (e.g. -la -lb -la)
-+ for deplib in $deplibs; do
-+ if test "X$duplicate_deps" = "Xyes" ; then
-+ case "$libs " in
-+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-+ esac
-+ fi
-+ libs="$libs $deplib"
-+ done
-
-- # We need an absolute path.
-- case "$dir" in
-- [\\/] | [A-Za-z]:[\\/]*) absdir="$dir" ;;
-+ if test "$linkmode" = lib; then
-+ libs="$predeps $libs $compiler_lib_search_path $postdeps"
-+
-+ # Compute libraries that are listed more than once in $predeps
-+ # $postdeps and mark them as special (i.e., whose duplicates are
-+ # not to be eliminated).
-+ pre_post_deps=
-+ if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
-+ for pre_post_dep in $predeps $postdeps; do
-+ case "$pre_post_deps " in
-+ *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
-+ esac
-+ pre_post_deps="$pre_post_deps $pre_post_dep"
-+ done
-+ fi
-+ pre_post_deps=
-+ fi
-+
-+ deplibs=
-+ newdependency_libs=
-+ newlib_search_path=
-+ need_relink=no # whether we're linking any uninstalled libtool libraries
-+ notinst_deplibs= # not-installed libtool libraries
-+ case $linkmode in
-+ lib)
-+ passes="conv link"
-+ for file in $dlfiles $dlprefiles; do
-+ case $file in
-+ *.la) ;;
- *)
-- absdir=`cd "$dir" && pwd`
-- if test -z "$absdir"; then
-- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
-- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
-- absdir="$dir"
-- fi
-+ $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
-+ exit $EXIT_FAILURE
- ;;
- esac
--
-- # This is the magic to use -rpath.
-- # Skip directories that are in the system default run-time
-- # search path, unless they have been requested with -R.
-- case " $sys_lib_dlsearch_path " in
-- *" $absdir "*) ;;
-- *)
-- case "$compile_rpath " in
-- *" $absdir "*) ;;
-- *) compile_rpath="$compile_rpath $absdir"
-- esac
-+ done
-+ ;;
-+ prog)
-+ compile_deplibs=
-+ finalize_deplibs=
-+ alldeplibs=no
-+ newdlfiles=
-+ newdlprefiles=
-+ passes="conv scan dlopen dlpreopen link"
-+ ;;
-+ *) passes="conv"
-+ ;;
-+ esac
-+ for pass in $passes; do
-+ if test "$linkmode,$pass" = "lib,link" ||
-+ test "$linkmode,$pass" = "prog,scan"; then
-+ libs="$deplibs"
-+ deplibs=
-+ fi
-+ if test "$linkmode" = prog; then
-+ case $pass in
-+ dlopen) libs="$dlfiles" ;;
-+ dlpreopen) libs="$dlprefiles" ;;
-+ link)
-+ libs="$deplibs %DEPLIBS%"
-+ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
-+ ;;
-+ esac
-+ fi
-+ if test "$pass" = dlopen; then
-+ # Collect dlpreopened libraries
-+ save_deplibs="$deplibs"
-+ deplibs=
-+ fi
-+ for deplib in $libs; do
-+ lib=
-+ found=no
-+ case $deplib in
-+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
-+ if test "$linkmode,$pass" = "prog,link"; then
-+ compile_deplibs="$deplib $compile_deplibs"
-+ finalize_deplibs="$deplib $finalize_deplibs"
-+ else
-+ compiler_flags="$compiler_flags $deplib"
-+ fi
-+ continue
-+ ;;
-+ -l*)
-+ if test "$linkmode" != lib && test "$linkmode" != prog; then
-+ $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
-+ continue
-+ fi
-+ name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
-+ for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
-+ for search_ext in .la $std_shrext .so .a; do
-+ # Search the libtool library
-+ lib="$searchdir/lib${name}${search_ext}"
-+ if test -f "$lib"; then
-+ if test "$search_ext" = ".la"; then
-+ found=yes
-+ else
-+ found=no
-+ fi
-+ break 2
-+ fi
-+ done
-+ done
-+ if test "$found" != yes; then
-+ # deplib doesn't seem to be a libtool library
-+ if test "$linkmode,$pass" = "prog,link"; then
-+ compile_deplibs="$deplib $compile_deplibs"
-+ finalize_deplibs="$deplib $finalize_deplibs"
-+ else
-+ deplibs="$deplib $deplibs"
-+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-+ fi
-+ continue
-+ else # deplib is a libtool library
-+ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
-+ # We need to do some special things here, and not later.
-+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-+ case " $predeps $postdeps " in
-+ *" $deplib "*)
-+ if (${SED} -e '2q' $lib |
-+ grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-+ library_names=
-+ old_library=
-+ case $lib in
-+ */* | *\\*) . $lib ;;
-+ *) . ./$lib ;;
-+ esac
-+ for l in $old_library $library_names; do
-+ ll="$l"
-+ done
-+ if test "X$ll" = "X$old_library" ; then # only static version available
-+ found=no
-+ ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-+ test "X$ladir" = "X$lib" && ladir="."
-+ lib=$ladir/$old_library
-+ if test "$linkmode,$pass" = "prog,link"; then
-+ compile_deplibs="$deplib $compile_deplibs"
-+ finalize_deplibs="$deplib $finalize_deplibs"
-+ else
-+ deplibs="$deplib $deplibs"
-+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-+ fi
-+ continue
-+ fi
-+ fi
-+ ;;
-+ *) ;;
-+ esac
-+ fi
-+ fi
-+ ;; # -l
-+ -L*)
-+ case $linkmode in
-+ lib)
-+ deplibs="$deplib $deplibs"
-+ test "$pass" = conv && continue
-+ newdependency_libs="$deplib $newdependency_libs"
-+ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-+ ;;
-+ prog)
-+ if test "$pass" = conv; then
-+ deplibs="$deplib $deplibs"
-+ continue
-+ fi
-+ if test "$pass" = scan; then
-+ deplibs="$deplib $deplibs"
-+ else
-+ compile_deplibs="$deplib $compile_deplibs"
-+ finalize_deplibs="$deplib $finalize_deplibs"
-+ fi
-+ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
- ;;
-- esac
--
-- case " $sys_lib_dlsearch_path " in
-- *" $libdir "*) ;;
- *)
-- case "$finalize_rpath " in
-- *" $libdir "*) ;;
-- *) finalize_rpath="$finalize_rpath $libdir"
-- esac
-+ $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
- ;;
-- esac
--
-- lib_linked=yes
-- case "$hardcode_action" in
-- immediate | unsupported)
-- if test "$hardcode_direct" = no; then
-- compile_command="$compile_command $dir/$linklib"
-- deplibs="$deplibs $dir/$linklib"
-- case "$host" in
-- *-*-cygwin* | *-*-mingw* | *-*-os2*)
-- dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
-- if test -n "$dllsearchpath"; then
-- dllsearchpath="$dllsearchpath:$dllsearchdir"
-- else
-- dllsearchpath="$dllsearchdir"
-+ esac # linkmode
-+ continue
-+ ;; # -L
-+ -R*)
-+ if test "$pass" = link; then
-+ dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
-+ # Make sure the xrpath contains only unique directories.
-+ case "$xrpath " in
-+ *" $dir "*) ;;
-+ *) xrpath="$xrpath $dir" ;;
-+ esac
-+ fi
-+ deplibs="$deplib $deplibs"
-+ continue
-+ ;;
-+ *.la) lib="$deplib" ;;
-+ *.$libext)
-+ if test "$pass" = conv; then
-+ deplibs="$deplib $deplibs"
-+ continue
-+ fi
-+ case $linkmode in
-+ lib)
-+ valid_a_lib=no
-+ case $deplibs_check_method in
-+ match_pattern*)
-+ set dummy $deplibs_check_method
-+ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-+ if eval $echo \"$deplib\" 2>/dev/null \
-+ | $SED 10q \
-+ | $EGREP "$match_pattern_regex" > /dev/null; then
-+ valid_a_lib=yes
- fi
- ;;
-- esac
-- elif test "$hardcode_minus_L" = no; then
-- case "$host" in
-- *-*-sunos*)
-- compile_shlibpath="$compile_shlibpath$dir:"
-+ pass_all)
-+ valid_a_lib=yes
- ;;
-- esac
-- case "$compile_command " in
-- *" -L$dir "*) ;;
-- *) compile_command="$compile_command -L$dir";;
-- esac
-- compile_command="$compile_command -l$name"
-- deplibs="$deplibs -L$dir -l$name"
-- elif test "$hardcode_shlibpath_var" = no; then
-- case ":$compile_shlibpath:" in
-- *":$dir:"*) ;;
-- *) compile_shlibpath="$compile_shlibpath$dir:";;
-- esac
-- compile_command="$compile_command -l$name"
-- deplibs="$deplibs -l$name"
-+ esac
-+ if test "$valid_a_lib" != yes; then
-+ $echo
-+ $echo "*** Warning: Trying to link with static lib archive $deplib."
-+ $echo "*** I have the capability to make that library automatically link in when"
-+ $echo "*** you link to this library. But I can only do this if you have a"
-+ $echo "*** shared version of the library, which you do not appear to have"
-+ $echo "*** because the file extensions .$libext of this argument makes me believe"
-+ $echo "*** that it is just a static archive that I should not used here."
- else
-- lib_linked=no
-+ $echo
-+ $echo "*** Warning: Linking the shared library $output against the"
-+ $echo "*** static library $deplib is not portable!"
-+ deplibs="$deplib $deplibs"
- fi
-+ continue
- ;;
--
-- relink)
-- if test "$hardcode_direct" = yes; then
-- compile_command="$compile_command $absdir/$linklib"
-- deplibs="$deplibs $absdir/$linklib"
-- elif test "$hardcode_minus_L" = yes; then
-- case "$compile_command " in
-- *" -L$absdir "*) ;;
-- *) compile_command="$compile_command -L$absdir";;
-- esac
-- compile_command="$compile_command -l$name"
-- deplibs="$deplibs -L$absdir -l$name"
-- elif test "$hardcode_shlibpath_var" = yes; then
-- case ":$compile_shlibpath:" in
-- *":$absdir:"*) ;;
-- *) compile_shlibpath="$compile_shlibpath$absdir:";;
-- esac
-- compile_command="$compile_command -l$name"
-- deplibs="$deplibs -l$name"
-+ prog)
-+ if test "$pass" != link; then
-+ deplibs="$deplib $deplibs"
- else
-- lib_linked=no
-+ compile_deplibs="$deplib $compile_deplibs"
-+ finalize_deplibs="$deplib $finalize_deplibs"
- fi
-+ continue
- ;;
-+ esac # linkmode
-+ ;; # *.$libext
-+ *.lo | *.$objext)
-+ if test "$pass" = conv; then
-+ deplibs="$deplib $deplibs"
-+ elif test "$linkmode" = prog; then
-+ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-+ # If there is no dlopen support or we're linking statically,
-+ # we need to preload.
-+ newdlprefiles="$newdlprefiles $deplib"
-+ compile_deplibs="$deplib $compile_deplibs"
-+ finalize_deplibs="$deplib $finalize_deplibs"
-+ else
-+ newdlfiles="$newdlfiles $deplib"
-+ fi
-+ fi
-+ continue
-+ ;;
-+ %DEPLIBS%)
-+ alldeplibs=yes
-+ continue
-+ ;;
-+ esac # case $deplib
-+ if test "$found" = yes || test -f "$lib"; then :
-+ else
-+ $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
-+ exit $EXIT_FAILURE
-+ fi
-
-- *)
-- lib_linked=no
-- ;;
-- esac
-+ # Check to see that this really is a libtool archive.
-+ if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-+ else
-+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-+ exit $EXIT_FAILURE
-+ fi
-+
-+ ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-+ test "X$ladir" = "X$lib" && ladir="."
-
-- if test "$lib_linked" != yes; then
-- $echo "$modename: configuration error: unsupported hardcode properties"
-- exit 1
-+ dlname=
-+ dlopen=
-+ dlpreopen=
-+ libdir=
-+ library_names=
-+ old_library=
-+ # If the library was installed with an old release of libtool,
-+ # it will not redefine variables installed, or shouldnotlink
-+ installed=yes
-+ shouldnotlink=no
-+ avoidtemprpath=
-+
-+
-+ # Read the .la file
-+ case $lib in
-+ */* | *\\*) . $lib ;;
-+ *) . ./$lib ;;
-+ esac
-+
-+ if test "$linkmode,$pass" = "lib,link" ||
-+ test "$linkmode,$pass" = "prog,scan" ||
-+ { test "$linkmode" != prog && test "$linkmode" != lib; }; then
-+ test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
-+ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
-+ fi
-+
-+ if test "$pass" = conv; then
-+ # Only check for convenience libraries
-+ deplibs="$lib $deplibs"
-+ if test -z "$libdir"; then
-+ if test -z "$old_library"; then
-+ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-+ exit $EXIT_FAILURE
-+ fi
-+ # It is a libtool convenience library, so add in its objects.
-+ convenience="$convenience $ladir/$objdir/$old_library"
-+ old_convenience="$old_convenience $ladir/$objdir/$old_library"
-+ tmp_libs=
-+ for deplib in $dependency_libs; do
-+ deplibs="$deplib $deplibs"
-+ if test "X$duplicate_deps" = "Xyes" ; then
-+ case "$tmp_libs " in
-+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-+ esac
-+ fi
-+ tmp_libs="$tmp_libs $deplib"
-+ done
-+ elif test "$linkmode" != prog && test "$linkmode" != lib; then
-+ $echo "$modename: \`$lib' is not a convenience library" 1>&2
-+ exit $EXIT_FAILURE
- fi
-+ continue
-+ fi # $pass = conv
-
-- # Finalize command for both is simple: just hardcode it.
-- if test "$hardcode_direct" = yes; then
-- finalize_command="$finalize_command $libdir/$linklib"
-- elif test "$hardcode_minus_L" = yes; then
-- case "$finalize_command " in
-- *" -L$libdir "*) ;;
-- *) finalize_command="$finalize_command -L$libdir";;
-- esac
-- finalize_command="$finalize_command -l$name"
-- elif test "$hardcode_shlibpath_var" = yes; then
-- case ":$finalize_shlibpath:" in
-- *":$libdir:"*) ;;
-- *) finalize_shlibpath="$finalize_shlibpath$libdir:";;
-- esac
-- finalize_command="$finalize_command -l$name"
-+
-+ # Get the name of the library we link against.
-+ linklib=
-+ for l in $old_library $library_names; do
-+ linklib="$l"
-+ done
-+ if test -z "$linklib"; then
-+ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-+ exit $EXIT_FAILURE
-+ fi
-+
-+ # This library was specified with -dlopen.
-+ if test "$pass" = dlopen; then
-+ if test -z "$libdir"; then
-+ $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
-+ exit $EXIT_FAILURE
-+ fi
-+ if test -z "$dlname" ||
-+ test "$dlopen_support" != yes ||
-+ test "$build_libtool_libs" = no; then
-+ # If there is no dlname, no dlopen support or we're linking
-+ # statically, we need to preload. We also need to preload any
-+ # dependent libraries so libltdl's deplib preloader doesn't
-+ # bomb out in the load deplibs phase.
-+ dlprefiles="$dlprefiles $lib $dependency_libs"
- else
-- # We cannot seem to hardcode it, guess we'll fake it.
-- case "$finalize_command " in
-- *" -L$dir "*) ;;
-- *) finalize_command="$finalize_command -L$libdir";;
-- esac
-- finalize_command="$finalize_command -l$name"
-+ newdlfiles="$newdlfiles $lib"
- fi
-+ continue
-+ fi # $pass = dlopen
-+
-+ # We need an absolute path.
-+ case $ladir in
-+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
-+ *)
-+ abs_ladir=`cd "$ladir" && pwd`
-+ if test -z "$abs_ladir"; then
-+ $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
-+ $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
-+ abs_ladir="$ladir"
-+ fi
-+ ;;
-+ esac
-+ laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-+
-+ # Find the relevant object directory and library name.
-+ if test "X$installed" = Xyes; then
-+ if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-+ $echo "$modename: warning: library \`$lib' was moved." 1>&2
-+ dir="$ladir"
-+ absdir="$abs_ladir"
-+ libdir="$abs_ladir"
-+ else
-+ dir="$libdir"
-+ absdir="$libdir"
-+ fi
-+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
- else
-- # Transform directly to old archives if we don't build new libraries.
-- if test -n "$pic_flag" && test -z "$old_library"; then
-- $echo "$modename: cannot find static library for \`$arg'" 1>&2
-- exit 1
-+ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-+ dir="$ladir"
-+ absdir="$abs_ladir"
-+ # Remove this search path later
-+ notinst_path="$notinst_path $abs_ladir"
-+ else
-+ dir="$ladir/$objdir"
-+ absdir="$abs_ladir/$objdir"
-+ # Remove this search path later
-+ notinst_path="$notinst_path $abs_ladir"
-+ fi
-+ fi # $installed = yes
-+ name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-+
-+ # This library was specified with -dlpreopen.
-+ if test "$pass" = dlpreopen; then
-+ if test -z "$libdir"; then
-+ $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
-+ exit $EXIT_FAILURE
-+ fi
-+ # Prefer using a static library (so that no silly _DYNAMIC symbols
-+ # are required to link).
-+ if test -n "$old_library"; then
-+ newdlprefiles="$newdlprefiles $dir/$old_library"
-+ # Otherwise, use the dlname, so that lt_dlopen finds it.
-+ elif test -n "$dlname"; then
-+ newdlprefiles="$newdlprefiles $dir/$dlname"
-+ else
-+ newdlprefiles="$newdlprefiles $dir/$linklib"
- fi
-+ fi # $pass = dlpreopen
-
-- # Here we assume that one of hardcode_direct or hardcode_minus_L
-- # is not unsupported. This is valid on all known static and
-- # shared platforms.
-- if test "$hardcode_direct" != unsupported; then
-- test -n "$old_library" && linklib="$old_library"
-- compile_command="$compile_command $dir/$linklib"
-- finalize_command="$finalize_command $dir/$linklib"
-+ if test -z "$libdir"; then
-+ # Link the convenience library
-+ if test "$linkmode" = lib; then
-+ deplibs="$dir/$old_library $deplibs"
-+ elif test "$linkmode,$pass" = "prog,link"; then
-+ compile_deplibs="$dir/$old_library $compile_deplibs"
-+ finalize_deplibs="$dir/$old_library $finalize_deplibs"
- else
-- case "$compile_command " in
-- *" -L$dir "*) ;;
-- *) compile_command="$compile_command -L$dir";;
-+ deplibs="$lib $deplibs" # used for prog,scan pass
-+ fi
-+ continue
-+ fi
-+
-+
-+ if test "$linkmode" = prog && test "$pass" != link; then
-+ newlib_search_path="$newlib_search_path $ladir"
-+ deplibs="$lib $deplibs"
-+
-+ linkalldeplibs=no
-+ if test "$link_all_deplibs" != no || test -z "$library_names" ||
-+ test "$build_libtool_libs" = no; then
-+ linkalldeplibs=yes
-+ fi
-+
-+ tmp_libs=
-+ for deplib in $dependency_libs; do
-+ case $deplib in
-+ -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
-+ esac
-+ # Need to link against all dependency_libs?
-+ if test "$linkalldeplibs" = yes; then
-+ deplibs="$deplib $deplibs"
-+ else
-+ # Need to hardcode shared library paths
-+ # or/and link against static libraries
-+ newdependency_libs="$deplib $newdependency_libs"
-+ fi
-+ if test "X$duplicate_deps" = "Xyes" ; then
-+ case "$tmp_libs " in
-+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-+ esac
-+ fi
-+ tmp_libs="$tmp_libs $deplib"
-+ done # for deplib
-+ continue
-+ fi # $linkmode = prog...
-+
-+ if test "$linkmode,$pass" = "prog,link"; then
-+ if test -n "$library_names" &&
-+ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
-+ # We need to hardcode the library path
-+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
-+ # Make sure the rpath contains only unique directories.
-+ case "$temp_rpath " in
-+ *" $dir "*) ;;
-+ *" $absdir "*) ;;
-+ *) temp_rpath="$temp_rpath $absdir" ;;
-+ esac
-+ fi
-+
-+ # Hardcode the library path.
-+ # Skip directories that are in the system default run-time
-+ # search path.
-+ case " $sys_lib_dlsearch_path " in
-+ *" $absdir "*) ;;
-+ *)
-+ case "$compile_rpath " in
-+ *" $absdir "*) ;;
-+ *) compile_rpath="$compile_rpath $absdir"
-+ esac
-+ ;;
- esac
-- compile_command="$compile_command -l$name"
-- case "$finalize_command " in
-- *" -L$dir "*) ;;
-- *) finalize_command="$finalize_command -L$dir";;
-+ case " $sys_lib_dlsearch_path " in
-+ *" $libdir "*) ;;
-+ *)
-+ case "$finalize_rpath " in
-+ *" $libdir "*) ;;
-+ *) finalize_rpath="$finalize_rpath $libdir"
-+ esac
-+ ;;
- esac
-- finalize_command="$finalize_command -l$name"
-+ fi # $linkmode,$pass = prog,link...
-+
-+ if test "$alldeplibs" = yes &&
-+ { test "$deplibs_check_method" = pass_all ||
-+ { test "$build_libtool_libs" = yes &&
-+ test -n "$library_names"; }; }; then
-+ # We only need to search for static libraries
-+ continue
- fi
- fi
-
-- # Add in any libraries that this one depends upon.
-- compile_command="$compile_command$dependency_libs"
-- finalize_command="$finalize_command$dependency_libs"
-- continue
-- ;;
-+ link_static=no # Whether the deplib will be linked statically
-+ use_static_libs=$prefer_static_libs
-+ if test "$use_static_libs" = built && test "$installed" = yes ; then
-+ use_static_libs=no
-+ fi
-+ if test -n "$library_names" &&
-+ { test "$use_static_libs" = no || test -z "$old_library"; }; then
-+ if test "$installed" = no; then
-+ notinst_deplibs="$notinst_deplibs $lib"
-+ need_relink=yes
-+ fi
-+ # This is a shared library
-+
-+ # Warn about portability, can't link against -module's on
-+ # some systems (darwin)
-+ if test "$shouldnotlink" = yes && test "$pass" = link ; then
-+ $echo
-+ if test "$linkmode" = prog; then
-+ $echo "*** Warning: Linking the executable $output against the loadable module"
-+ else
-+ $echo "*** Warning: Linking the shared library $output against the loadable module"
-+ fi
-+ $echo "*** $linklib is not portable!"
-+ fi
-+ if test "$linkmode" = lib &&
-+ test "$hardcode_into_libs" = yes; then
-+ # Hardcode the library path.
-+ # Skip directories that are in the system default run-time
-+ # search path.
-+ case " $sys_lib_dlsearch_path " in
-+ *" $absdir "*) ;;
-+ *)
-+ case "$compile_rpath " in
-+ *" $absdir "*) ;;
-+ *) compile_rpath="$compile_rpath $absdir"
-+ esac
-+ ;;
-+ esac
-+ case " $sys_lib_dlsearch_path " in
-+ *" $libdir "*) ;;
-+ *)
-+ case "$finalize_rpath " in
-+ *" $libdir "*) ;;
-+ *) finalize_rpath="$finalize_rpath $libdir"
-+ esac
-+ ;;
-+ esac
-+ fi
-
-- # Some other compiler argument.
-- *)
-- # Unknown arguments in both finalize_command and compile_command need
-- # to be aesthetically quoted because they are evaled later.
-- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-- case "$arg" in
-- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
-- arg="\"$arg\""
-- ;;
-- esac
-- ;;
-- esac
-+ if test -n "$old_archive_from_expsyms_cmds"; then
-+ # figure out the soname
-+ set dummy $library_names
-+ realname="$2"
-+ shift; shift
-+ libname=`eval \\$echo \"$libname_spec\"`
-+ # use dlname if we got it. it's perfectly good, no?
-+ if test -n "$dlname"; then
-+ soname="$dlname"
-+ elif test -n "$soname_spec"; then
-+ # bleh windows
-+ case $host in
-+ *cygwin* | mingw*)
-+ major=`expr $current - $age`
-+ versuffix="-$major"
-+ ;;
-+ esac
-+ eval soname=\"$soname_spec\"
-+ else
-+ soname="$realname"
-+ fi
-
-- # Now actually substitute the argument into the commands.
-- if test -n "$arg"; then
-- compile_command="$compile_command $arg"
-- finalize_command="$finalize_command $arg"
-- fi
-- done
-+ # Make a new name for the extract_expsyms_cmds to use
-+ soroot="$soname"
-+ soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
-+ newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
-
-- if test -n "$prev"; then
-- $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
-- $echo "$help" 1>&2
-- exit 1
-- fi
-+ # If the library has no export list, then create one now
-+ if test -f "$output_objdir/$soname-def"; then :
-+ else
-+ $show "extracting exported symbol list from \`$soname'"
-+ save_ifs="$IFS"; IFS='~'
-+ cmds=$extract_expsyms_cmds
-+ for cmd in $cmds; do
-+ IFS="$save_ifs"
-+ eval cmd=\"$cmd\"
-+ $show "$cmd"
-+ $run eval "$cmd" || exit $?
-+ done
-+ IFS="$save_ifs"
-+ fi
-
-- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
-- eval arg=\"$export_dynamic_flag_spec\"
-- compile_command="$compile_command $arg"
-- finalize_command="$finalize_command $arg"
-- fi
-+ # Create $newlib
-+ if test -f "$output_objdir/$newlib"; then :; else
-+ $show "generating import library for \`$soname'"
-+ save_ifs="$IFS"; IFS='~'
-+ cmds=$old_archive_from_expsyms_cmds
-+ for cmd in $cmds; do
-+ IFS="$save_ifs"
-+ eval cmd=\"$cmd\"
-+ $show "$cmd"
-+ $run eval "$cmd" || exit $?
-+ done
-+ IFS="$save_ifs"
-+ fi
-+ # make sure the library variables are pointing to the new library
-+ dir=$output_objdir
-+ linklib=$newlib
-+ fi # test -n "$old_archive_from_expsyms_cmds"
-+
-+ if test "$linkmode" = prog || test "$mode" != relink; then
-+ add_shlibpath=
-+ add_dir=
-+ add=
-+ lib_linked=yes
-+ case $hardcode_action in
-+ immediate | unsupported)
-+ if test "$hardcode_direct" = no; then
-+ add="$dir/$linklib"
-+ case $host in
-+ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
-+ *-*-sysv4*uw2*) add_dir="-L$dir" ;;
-+ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
-+ *-*-unixware7*) add_dir="-L$dir" ;;
-+ *-*-darwin* )
-+ # if the lib is a module then we can not link against
-+ # it, someone is ignoring the new warnings I added
-+ if /usr/bin/file -L $add 2> /dev/null |
-+ $EGREP ": [^:]* bundle" >/dev/null ; then
-+ $echo "** Warning, lib $linklib is a module, not a shared library"
-+ if test -z "$old_library" ; then
-+ $echo
-+ $echo "** And there doesn't seem to be a static archive available"
-+ $echo "** The link will probably fail, sorry"
-+ else
-+ add="$dir/$old_library"
-+ fi
-+ fi
-+ esac
-+ elif test "$hardcode_minus_L" = no; then
-+ case $host in
-+ *-*-sunos*) add_shlibpath="$dir" ;;
-+ esac
-+ add_dir="-L$dir"
-+ add="-l$name"
-+ elif test "$hardcode_shlibpath_var" = no; then
-+ add_shlibpath="$dir"
-+ add="-l$name"
-+ else
-+ lib_linked=no
-+ fi
-+ ;;
-+ relink)
-+ if test "$hardcode_direct" = yes; then
-+ add="$dir/$linklib"
-+ elif test "$hardcode_minus_L" = yes; then
-+ add_dir="-L$dir"
-+ # Try looking first in the location we're being installed to.
-+ if test -n "$inst_prefix_dir"; then
-+ case $libdir in
-+ [\\/]*)
-+ add_dir="$add_dir -L$inst_prefix_dir$libdir"
-+ ;;
-+ esac
-+ fi
-+ add="-l$name"
-+ elif test "$hardcode_shlibpath_var" = yes; then
-+ add_shlibpath="$dir"
-+ add="-l$name"
-+ else
-+ lib_linked=no
-+ fi
-+ ;;
-+ *) lib_linked=no ;;
-+ esac
-
-- oldlibs=
-- # calculate the name of the file, without its directory
-- outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
-- libobjs_save="$libobjs"
-+ if test "$lib_linked" != yes; then
-+ $echo "$modename: configuration error: unsupported hardcode properties"
-+ exit $EXIT_FAILURE
-+ fi
-
-- case "$output" in
-- "")
-- $echo "$modename: you must specify an output file" 1>&2
-- $echo "$help" 1>&2
-- exit 1
-- ;;
-+ if test -n "$add_shlibpath"; then
-+ case :$compile_shlibpath: in
-+ *":$add_shlibpath:"*) ;;
-+ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
-+ esac
-+ fi
-+ if test "$linkmode" = prog; then
-+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
-+ test -n "$add" && compile_deplibs="$add $compile_deplibs"
-+ else
-+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
-+ test -n "$add" && deplibs="$add $deplibs"
-+ if test "$hardcode_direct" != yes && \
-+ test "$hardcode_minus_L" != yes && \
-+ test "$hardcode_shlibpath_var" = yes; then
-+ case :$finalize_shlibpath: in
-+ *":$libdir:"*) ;;
-+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-+ esac
-+ fi
-+ fi
-+ fi
-+
-+ if test "$linkmode" = prog || test "$mode" = relink; then
-+ add_shlibpath=
-+ add_dir=
-+ add=
-+ # Finalize command for both is simple: just hardcode it.
-+ if test "$hardcode_direct" = yes; then
-+ add="$libdir/$linklib"
-+ elif test "$hardcode_minus_L" = yes; then
-+ add_dir="-L$libdir"
-+ add="-l$name"
-+ elif test "$hardcode_shlibpath_var" = yes; then
-+ case :$finalize_shlibpath: in
-+ *":$libdir:"*) ;;
-+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-+ esac
-+ add="-l$name"
-+ elif test "$hardcode_automatic" = yes; then
-+ if test -n "$inst_prefix_dir" &&
-+ test -f "$inst_prefix_dir$libdir/$linklib" ; then
-+ add="$inst_prefix_dir$libdir/$linklib"
-+ else
-+ add="$libdir/$linklib"
-+ fi
-+ else
-+ # We cannot seem to hardcode it, guess we'll fake it.
-+ add_dir="-L$libdir"
-+ # Try looking first in the location we're being installed to.
-+ if test -n "$inst_prefix_dir"; then
-+ case $libdir in
-+ [\\/]*)
-+ add_dir="$add_dir -L$inst_prefix_dir$libdir"
-+ ;;
-+ esac
-+ fi
-+ add="-l$name"
-+ fi
-+
-+ if test "$linkmode" = prog; then
-+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
-+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
-+ else
-+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
-+ test -n "$add" && deplibs="$add $deplibs"
-+ fi
-+ fi
-+ elif test "$linkmode" = prog; then
-+ # Here we assume that one of hardcode_direct or hardcode_minus_L
-+ # is not unsupported. This is valid on all known static and
-+ # shared platforms.
-+ if test "$hardcode_direct" != unsupported; then
-+ test -n "$old_library" && linklib="$old_library"
-+ compile_deplibs="$dir/$linklib $compile_deplibs"
-+ finalize_deplibs="$dir/$linklib $finalize_deplibs"
-+ else
-+ compile_deplibs="-l$name -L$dir $compile_deplibs"
-+ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
-+ fi
-+ elif test "$build_libtool_libs" = yes; then
-+ # Not a shared library
-+ if test "$deplibs_check_method" != pass_all; then
-+ # We're trying link a shared library against a static one
-+ # but the system doesn't support it.
-+
-+ # Just print a warning and add the library to dependency_libs so
-+ # that the program can be linked against the static library.
-+ $echo
-+ $echo "*** Warning: This system can not link to static lib archive $lib."
-+ $echo "*** I have the capability to make that library automatically link in when"
-+ $echo "*** you link to this library. But I can only do this if you have a"
-+ $echo "*** shared version of the library, which you do not appear to have."
-+ if test "$module" = yes; then
-+ $echo "*** But as you try to build a module library, libtool will still create "
-+ $echo "*** a static module, that should work as long as the dlopening application"
-+ $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
-+ if test -z "$global_symbol_pipe"; then
-+ $echo
-+ $echo "*** However, this would only work if libtool was able to extract symbol"
-+ $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-+ $echo "*** not find such a program. So, this module is probably useless."
-+ $echo "*** \`nm' from GNU binutils and a full rebuild may help."
-+ fi
-+ if test "$build_old_libs" = no; then
-+ build_libtool_libs=module
-+ build_old_libs=yes
-+ else
-+ build_libtool_libs=no
-+ fi
-+ fi
-+ else
-+ deplibs="$dir/$old_library $deplibs"
-+ link_static=yes
-+ fi
-+ fi # link shared/static library?
-+
-+ if test "$linkmode" = lib; then
-+ if test -n "$dependency_libs" &&
-+ { test "$hardcode_into_libs" != yes ||
-+ test "$build_old_libs" = yes ||
-+ test "$link_static" = yes; }; then
-+ # Extract -R from dependency_libs
-+ temp_deplibs=
-+ for libdir in $dependency_libs; do
-+ case $libdir in
-+ -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
-+ case " $xrpath " in
-+ *" $temp_xrpath "*) ;;
-+ *) xrpath="$xrpath $temp_xrpath";;
-+ esac;;
-+ *) temp_deplibs="$temp_deplibs $libdir";;
-+ esac
-+ done
-+ dependency_libs="$temp_deplibs"
-+ fi
-+
-+ newlib_search_path="$newlib_search_path $absdir"
-+ # Link against this library
-+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
-+ # ... and its dependency_libs
-+ tmp_libs=
-+ for deplib in $dependency_libs; do
-+ newdependency_libs="$deplib $newdependency_libs"
-+ if test "X$duplicate_deps" = "Xyes" ; then
-+ case "$tmp_libs " in
-+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-+ esac
-+ fi
-+ tmp_libs="$tmp_libs $deplib"
-+ done
-
-- *.a | *.lib)
-- if test -n "$link_against_libtool_libs"; then
-- $echo "$modename: error: cannot link libtool libraries into archives" 1>&2
-- exit 1
-+ if test "$link_all_deplibs" != no; then
-+ # Add the search paths of all dependency libraries
-+ for deplib in $dependency_libs; do
-+ case $deplib in
-+ -L*) path="$deplib" ;;
-+ *.la)
-+ dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
-+ test "X$dir" = "X$deplib" && dir="."
-+ # We need an absolute path.
-+ case $dir in
-+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
-+ *)
-+ absdir=`cd "$dir" && pwd`
-+ if test -z "$absdir"; then
-+ $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
-+ absdir="$dir"
-+ fi
-+ ;;
-+ esac
-+ if grep "^installed=no" $deplib > /dev/null; then
-+ path="$absdir/$objdir"
-+ else
-+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-+ if test -z "$libdir"; then
-+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-+ exit $EXIT_FAILURE
-+ fi
-+ if test "$absdir" != "$libdir"; then
-+ $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
-+ fi
-+ path="$absdir"
-+ fi
-+ depdepl=
-+ case $host in
-+ *-*-darwin*)
-+ # we do not want to link against static libs,
-+ # but need to link against shared
-+ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
-+ if test -n "$deplibrary_names" ; then
-+ for tmp in $deplibrary_names ; do
-+ depdepl=$tmp
-+ done
-+ if test -f "$path/$depdepl" ; then
-+ depdepl="$path/$depdepl"
-+ fi
-+ # do not add paths which are already there
-+ case " $newlib_search_path " in
-+ *" $path "*) ;;
-+ *) newlib_search_path="$newlib_search_path $path";;
-+ esac
-+ fi
-+ path=""
-+ ;;
-+ *)
-+ path="-L$path"
-+ ;;
-+ esac
-+ ;;
-+ -l*)
-+ case $host in
-+ *-*-darwin*)
-+ # Again, we only want to link against shared libraries
-+ eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
-+ for tmp in $newlib_search_path ; do
-+ if test -f "$tmp/lib$tmp_libs.dylib" ; then
-+ eval depdepl="$tmp/lib$tmp_libs.dylib"
-+ break
-+ fi
-+ done
-+ path=""
-+ ;;
-+ *) continue ;;
-+ esac
-+ ;;
-+ *) continue ;;
-+ esac
-+ case " $deplibs " in
-+ *" $path "*) ;;
-+ *) deplibs="$path $deplibs" ;;
-+ esac
-+ case " $deplibs " in
-+ *" $depdepl "*) ;;
-+ *) deplibs="$depdepl $deplibs" ;;
-+ esac
-+ done
-+ fi # link_all_deplibs != no
-+ fi # linkmode = lib
-+ done # for deplib in $libs
-+ dependency_libs="$newdependency_libs"
-+ if test "$pass" = dlpreopen; then
-+ # Link the dlpreopened libraries before other libraries
-+ for deplib in $save_deplibs; do
-+ deplibs="$deplib $deplibs"
-+ done
- fi
-+ if test "$pass" != dlopen; then
-+ if test "$pass" != conv; then
-+ # Make sure lib_search_path contains only unique directories.
-+ lib_search_path=
-+ for dir in $newlib_search_path; do
-+ case "$lib_search_path " in
-+ *" $dir "*) ;;
-+ *) lib_search_path="$lib_search_path $dir" ;;
-+ esac
-+ done
-+ newlib_search_path=
-+ fi
-
-+ if test "$linkmode,$pass" != "prog,link"; then
-+ vars="deplibs"
-+ else
-+ vars="compile_deplibs finalize_deplibs"
-+ fi
-+ for var in $vars dependency_libs; do
-+ # Add libraries to $var in reverse order
-+ eval tmp_libs=\"\$$var\"
-+ new_libs=
-+ for deplib in $tmp_libs; do
-+ # FIXME: Pedantically, this is the right thing to do, so
-+ # that some nasty dependency loop isn't accidentally
-+ # broken:
-+ #new_libs="$deplib $new_libs"
-+ # Pragmatically, this seems to cause very few problems in
-+ # practice:
-+ case $deplib in
-+ -L*) new_libs="$deplib $new_libs" ;;
-+ -R*) ;;
-+ *)
-+ # And here is the reason: when a library appears more
-+ # than once as an explicit dependence of a library, or
-+ # is implicitly linked in more than once by the
-+ # compiler, it is considered special, and multiple
-+ # occurrences thereof are not removed. Compare this
-+ # with having the same library being listed as a
-+ # dependency of multiple other libraries: in this case,
-+ # we know (pedantically, we assume) the library does not
-+ # need to be listed more than once, so we keep only the
-+ # last copy. This is not always right, but it is rare
-+ # enough that we require users that really mean to play
-+ # such unportable linking tricks to link the library
-+ # using -Wl,-lname, so that libtool does not consider it
-+ # for duplicate removal.
-+ case " $specialdeplibs " in
-+ *" $deplib "*) new_libs="$deplib $new_libs" ;;
-+ *)
-+ case " $new_libs " in
-+ *" $deplib "*) ;;
-+ *) new_libs="$deplib $new_libs" ;;
-+ esac
-+ ;;
-+ esac
-+ ;;
-+ esac
-+ done
-+ tmp_libs=
-+ for deplib in $new_libs; do
-+ case $deplib in
-+ -L*)
-+ case " $tmp_libs " in
-+ *" $deplib "*) ;;
-+ *) tmp_libs="$tmp_libs $deplib" ;;
-+ esac
-+ ;;
-+ *) tmp_libs="$tmp_libs $deplib" ;;
-+ esac
-+ done
-+ eval $var=\"$tmp_libs\"
-+ done # for var
-+ fi
-+ # Last step: remove runtime libs from dependency_libs
-+ # (they stay in deplibs)
-+ tmp_libs=
-+ for i in $dependency_libs ; do
-+ case " $predeps $postdeps $compiler_lib_search_path " in
-+ *" $i "*)
-+ i=""
-+ ;;
-+ esac
-+ if test -n "$i" ; then
-+ tmp_libs="$tmp_libs $i"
-+ fi
-+ done
-+ dependency_libs=$tmp_libs
-+ done # for pass
-+ if test "$linkmode" = prog; then
-+ dlfiles="$newdlfiles"
-+ dlprefiles="$newdlprefiles"
-+ fi
-+
-+ case $linkmode in
-+ oldlib)
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
- fi
-@@ -1552,7 +3076,7 @@
- fi
-
- if test -n "$vinfo"; then
-- $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
-+ $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
- fi
-
- if test -n "$release"; then
-@@ -1566,24 +3090,27 @@
- # Now set the variables for building old libraries.
- build_libtool_libs=no
- oldlibs="$output"
-+ objs="$objs$old_deplibs"
- ;;
-
-- *.la)
-+ lib)
- # Make sure we only generate libraries of the form `libNAME.la'.
-- case "$outputname" in
-+ case $outputname in
- lib*)
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-+ eval shared_ext=\"$shrext_cmds\"
- eval libname=\"$libname_spec\"
- ;;
- *)
- if test "$module" = no; then
- $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
- $echo "$help" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- fi
- if test "$need_lib_prefix" != no; then
- # Add the "lib" prefix for modules if required
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-+ eval shared_ext=\"$shrext_cmds\"
- eval libname=\"$libname_spec\"
- else
- libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-@@ -1591,30 +3118,24 @@
- ;;
- esac
-
-- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
-- if test "X$output_objdir" = "X$output"; then
-- output_objdir="$objdir"
-- else
-- output_objdir="$output_objdir/$objdir"
-- fi
--
- if test -n "$objs"; then
-- $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
-- exit 1
-- fi
--
-- # How the heck are we supposed to write a wrapper for a shared library?
-- if test -n "$link_against_libtool_libs"; then
-- $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2
-- exit 1
-+ if test "$deplibs_check_method" != pass_all; then
-+ $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
-+ exit $EXIT_FAILURE
-+ else
-+ $echo
-+ $echo "*** Warning: Linking the shared library $output against the non-libtool"
-+ $echo "*** objects $objs is not portable!"
-+ libobjs="$libobjs $objs"
-+ fi
- fi
-
-- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-- $echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2
-+ if test "$dlself" != no; then
-+ $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
- fi
-
- set dummy $rpath
-- if test $# -gt 2; then
-+ if test "$#" -gt 2; then
- $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
- fi
- install_libdir="$2"
-@@ -1623,15 +3144,16 @@
- if test -z "$rpath"; then
- if test "$build_libtool_libs" = yes; then
- # Building a libtool convenience library.
-- libext=al
-+ # Some compilers have problems with a `.al' extension so
-+ # convenience libraries should have the same extension an
-+ # archive normally would.
- oldlibs="$output_objdir/$libname.$libext $oldlibs"
- build_libtool_libs=convenience
- build_old_libs=yes
- fi
-- dependency_libs="$deplibs"
-
- if test -n "$vinfo"; then
-- $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
-+ $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
- fi
-
- if test -n "$release"; then
-@@ -1640,73 +3162,143 @@
- else
-
- # Parse the version information argument.
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS=':'
-+ save_ifs="$IFS"; IFS=':'
- set dummy $vinfo 0 0 0
- IFS="$save_ifs"
-
- if test -n "$8"; then
- $echo "$modename: too many parameters to \`-version-info'" 1>&2
- $echo "$help" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- fi
-
-- current="$2"
-- revision="$3"
-- age="$4"
-+ # convert absolute version numbers to libtool ages
-+ # this retains compatibility with .la files and attempts
-+ # to make the code below a bit more comprehensible
-+
-+ case $vinfo_number in
-+ yes)
-+ number_major="$2"
-+ number_minor="$3"
-+ number_revision="$4"
-+ #
-+ # There are really only two kinds -- those that
-+ # use the current revision as the major version
-+ # and those that subtract age and use age as
-+ # a minor version. But, then there is irix
-+ # which has an extra 1 added just for fun
-+ #
-+ case $version_type in
-+ darwin|linux|osf|windows)
-+ current=`expr $number_major + $number_minor`
-+ age="$number_minor"
-+ revision="$number_revision"
-+ ;;
-+ freebsd-aout|freebsd-elf|sunos)
-+ current="$number_major"
-+ revision="$number_minor"
-+ age="0"
-+ ;;
-+ irix|nonstopux)
-+ current=`expr $number_major + $number_minor - 1`
-+ age="$number_minor"
-+ revision="$number_minor"
-+ ;;
-+ *)
-+ $echo "$modename: unknown library version type \`$version_type'" 1>&2
-+ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
-+ exit $EXIT_FAILURE
-+ ;;
-+ esac
-+ ;;
-+ no)
-+ current="$2"
-+ revision="$3"
-+ age="$4"
-+ ;;
-+ esac
-
- # Check that each of the things are valid numbers.
-- case "$current" in
-- 0 | [1-9] | [1-9][0-9]*) ;;
-+ case $current in
-+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
-- $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
-+ $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- ;;
- esac
-
-- case "$revision" in
-- 0 | [1-9] | [1-9][0-9]*) ;;
-+ case $revision in
-+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
-- $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
-+ $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- ;;
- esac
-
-- case "$age" in
-- 0 | [1-9] | [1-9][0-9]*) ;;
-+ case $age in
-+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
-- $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
-+ $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- ;;
- esac
-
-- if test $age -gt $current; then
-+ if test "$age" -gt "$current"; then
- $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- fi
-
- # Calculate the version variables.
- major=
- versuffix=
- verstring=
-- case "$version_type" in
-+ case $version_type in
- none) ;;
-
-- irix)
-+ darwin)
-+ # Like Linux, but with the current version available in
-+ # verstring for coding it into the library header
-+ major=.`expr $current - $age`
-+ versuffix="$major.$age.$revision"
-+ # Darwin ld doesn't like 0 for these options...
-+ minor_current=`expr $current + 1`
-+ verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
-+ ;;
-+
-+ freebsd-aout)
-+ major=".$current"
-+ versuffix=".$current.$revision";
-+ ;;
-+
-+ freebsd-elf)
-+ major=".$current"
-+ versuffix=".$current";
-+ ;;
-+
-+ irix | nonstopux)
- major=`expr $current - $age + 1`
-- versuffix="$major.$revision"
-- verstring="sgi$major.$revision"
-+
-+ case $version_type in
-+ nonstopux) verstring_prefix=nonstopux ;;
-+ *) verstring_prefix=sgi ;;
-+ esac
-+ verstring="$verstring_prefix$major.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$revision
-- while test $loop != 0; do
-+ while test "$loop" -ne 0; do
- iface=`expr $revision - $loop`
- loop=`expr $loop - 1`
-- verstring="sgi$major.$iface:$verstring"
-+ verstring="$verstring_prefix$major.$iface:$verstring"
- done
-+
-+ # Before this point, $major must not contain `.'.
-+ major=.$major
-+ versuffix="$major.$revision"
- ;;
-
- linux)
-@@ -1715,13 +3307,13 @@
- ;;
-
- osf)
-- major=`expr $current - $age`
-+ major=.`expr $current - $age`
- versuffix=".$current.$age.$revision"
- verstring="$current.$age.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$age
-- while test $loop != 0; do
-+ while test "$loop" -ne 0; do
- iface=`expr $current - $loop`
- loop=`expr $loop - 1`
- verstring="$verstring:${iface}.0"
-@@ -1736,34 +3328,33 @@
- versuffix=".$current.$revision"
- ;;
-
-- freebsd-aout)
-- major=".$current"
-- versuffix=".$current.$revision";
-- ;;
--
-- freebsd-elf)
-- major=".$current"
-- versuffix=".$current";
-- ;;
--
- windows)
-- # Like Linux, but with '-' rather than '.', since we only
-- # want one extension on Windows 95.
-+ # Use '-' rather than '.', since we only want one
-+ # extension on DOS 8.3 filesystems.
- major=`expr $current - $age`
-- versuffix="-$major-$age-$revision"
-+ versuffix="-$major"
- ;;
-
- *)
- $echo "$modename: unknown library version type \`$version_type'" 1>&2
-- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
-- exit 1
-+ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
-+ exit $EXIT_FAILURE
- ;;
- esac
-
- # Clear the version info if we defaulted, and they specified a release.
- if test -z "$vinfo" && test -n "$release"; then
- major=
-- verstring="0.0"
-+ case $version_type in
-+ darwin)
-+ # we can't check for "0.0" in archive_cmds due to quoting
-+ # problems, so we reset it completely
-+ verstring=
-+ ;;
-+ *)
-+ verstring="0.0"
-+ ;;
-+ esac
- if test "$need_version" = no; then
- versuffix=
- else
-@@ -1777,7 +3368,7 @@
- versuffix=
- verstring=""
- fi
--
-+
- # Check to see if the archive will have undefined symbols.
- if test "$allow_undefined" = yes; then
- if test "$allow_undefined_flag" = unsupported; then
-@@ -1789,29 +3380,32 @@
- # Don't allow undefined symbols.
- allow_undefined_flag="$no_undefined_flag"
- fi
--
-- dependency_libs="$deplibs"
-- case "$host" in
-- *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
-- # these systems don't actually have a c library (as such)!
-- ;;
-- *)
-- # Add libc to deplibs on all other systems.
-- deplibs="$deplibs -lc"
-- ;;
-- esac
- fi
-
-- # Create the output directory, or remove our outputs if we need to.
-- if test -d $output_objdir; then
-- $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
-- $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
-- else
-- $show "$mkdir $output_objdir"
-- $run $mkdir $output_objdir
-- status=$?
-- if test $status -ne 0 && test ! -d $output_objdir; then
-- exit $status
-+ if test "$mode" != relink; then
-+ # Remove our outputs, but don't remove object files since they
-+ # may have been created when compiling PIC objects.
-+ removelist=
-+ tempremovelist=`$echo "$output_objdir/*"`
-+ for p in $tempremovelist; do
-+ case $p in
-+ *.$objext)
-+ ;;
-+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
-+ if test "X$precious_files_regex" != "X"; then
-+ if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
-+ then
-+ continue
-+ fi
-+ fi
-+ removelist="$removelist $p"
-+ ;;
-+ *) ;;
-+ esac
-+ done
-+ if test -n "$removelist"; then
-+ $show "${rm}r $removelist"
-+ $run ${rm}r $removelist
- fi
- fi
-
-@@ -1823,7 +3417,79 @@
- oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
- fi
-
-+ # Eliminate all temporary directories.
-+ for path in $notinst_path; do
-+ lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
-+ deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
-+ dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
-+ done
-+
-+ if test -n "$xrpath"; then
-+ # If the user specified any rpath flags, then add them.
-+ temp_xrpath=
-+ for libdir in $xrpath; do
-+ temp_xrpath="$temp_xrpath -R$libdir"
-+ case "$finalize_rpath " in
-+ *" $libdir "*) ;;
-+ *) finalize_rpath="$finalize_rpath $libdir" ;;
-+ esac
-+ done
-+ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
-+ dependency_libs="$temp_xrpath $dependency_libs"
-+ fi
-+ fi
-+
-+ # Make sure dlfiles contains only unique files that won't be dlpreopened
-+ old_dlfiles="$dlfiles"
-+ dlfiles=
-+ for lib in $old_dlfiles; do
-+ case " $dlprefiles $dlfiles " in
-+ *" $lib "*) ;;
-+ *) dlfiles="$dlfiles $lib" ;;
-+ esac
-+ done
-+
-+ # Make sure dlprefiles contains only unique files
-+ old_dlprefiles="$dlprefiles"
-+ dlprefiles=
-+ for lib in $old_dlprefiles; do
-+ case "$dlprefiles " in
-+ *" $lib "*) ;;
-+ *) dlprefiles="$dlprefiles $lib" ;;
-+ esac
-+ done
-+
- if test "$build_libtool_libs" = yes; then
-+ if test -n "$rpath"; then
-+ case $host in
-+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
-+ # these systems don't actually have a c library (as such)!
-+ ;;
-+ *-*-rhapsody* | *-*-darwin1.[012])
-+ # Rhapsody C library is in the System framework
-+ deplibs="$deplibs -framework System"
-+ ;;
-+ *-*-netbsd*)
-+ # Don't link with libc until the a.out ld.so is fixed.
-+ ;;
-+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-+ # Do not include libc due to us having libc/libc_r.
-+ ;;
-+ *-*-sco3.2v5* | *-*-sco5v6*)
-+ # Causes problems with __ctype
-+ ;;
-+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
-+ # Compiler inserts libc in the correct place for threads to work
-+ ;;
-+ *)
-+ # Add libc to deplibs on all other systems if necessary.
-+ if test "$build_libtool_need_lc" = "yes"; then
-+ deplibs="$deplibs -lc"
-+ fi
-+ ;;
-+ esac
-+ fi
-+
- # Transform deplibs into only deplibs that can be linked in shared.
- name_save=$name
- libname_save=$libname
-@@ -1838,13 +3504,13 @@
- major=""
- newdeplibs=
- droppeddeps=no
-- case "$deplibs_check_method" in
-+ case $deplibs_check_method in
- pass_all)
- # Don't check for shared/static. Everything works.
- # This might be a little naive. We might want to check
- # whether the library exists or not. But this is on
- # osf3 & osf4 and I'm not really sure... Just
-- # implementing what was already the behaviour.
-+ # implementing what was already the behavior.
- newdeplibs=$deplibs
- ;;
- test_compile)
-@@ -1857,64 +3523,88 @@
- int main() { return 0; }
- EOF
- $rm conftest
-- $CC -o conftest conftest.c $deplibs
-- if test $? -eq 0 ; then
-+ $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
-+ if test "$?" -eq 0 ; then
- ldd_output=`ldd conftest`
- for i in $deplibs; do
-- name="`expr $i : '-l\(.*\)'`"
-+ name=`expr $i : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
-- if test "$name" != "" ; then
-- libname=`eval \\$echo \"$libname_spec\"`
-- deplib_matches=`eval \\$echo \"$library_names_spec\"`
-- set dummy $deplib_matches
-- deplib_match=$2
-- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-- newdeplibs="$newdeplibs $i"
-- else
-- droppeddeps=yes
-- echo
-- echo "*** Warning: This library needs some functionality provided by $i."
-- echo "*** I have the capability to make that library automatically link in when"
-- echo "*** you link to this library. But I can only do this if you have a"
-- echo "*** shared version of the library, which you do not appear to have."
-+ if test "$name" != "" && test "$name" -ne "0"; then
-+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-+ case " $predeps $postdeps " in
-+ *" $i "*)
-+ newdeplibs="$newdeplibs $i"
-+ i=""
-+ ;;
-+ esac
-+ fi
-+ if test -n "$i" ; then
-+ libname=`eval \\$echo \"$libname_spec\"`
-+ deplib_matches=`eval \\$echo \"$library_names_spec\"`
-+ set dummy $deplib_matches
-+ deplib_match=$2
-+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-+ newdeplibs="$newdeplibs $i"
-+ else
-+ droppeddeps=yes
-+ $echo
-+ $echo "*** Warning: dynamic linker does not accept needed library $i."
-+ $echo "*** I have the capability to make that library automatically link in when"
-+ $echo "*** you link to this library. But I can only do this if you have a"
-+ $echo "*** shared version of the library, which I believe you do not have"
-+ $echo "*** because a test_compile did reveal that the linker did not use it for"
-+ $echo "*** its dynamic dependency list that programs get resolved with at runtime."
-+ fi
- fi
- else
- newdeplibs="$newdeplibs $i"
- fi
- done
- else
-- # Error occured in the first compile. Let's try to salvage the situation:
-- # Compile a seperate program for each library.
-+ # Error occurred in the first compile. Let's try to salvage
-+ # the situation: Compile a separate program for each library.
- for i in $deplibs; do
-- name="`expr $i : '-l\(.*\)'`"
-- # If $name is empty we are operating on a -L argument.
-- if test "$name" != "" ; then
-+ name=`expr $i : '-l\(.*\)'`
-+ # If $name is empty we are operating on a -L argument.
-+ if test "$name" != "" && test "$name" != "0"; then
- $rm conftest
-- $CC -o conftest conftest.c $i
-+ $LTCC $LTCFLAGS -o conftest conftest.c $i
- # Did it work?
-- if test $? -eq 0 ; then
-+ if test "$?" -eq 0 ; then
- ldd_output=`ldd conftest`
-- libname=`eval \\$echo \"$libname_spec\"`
-- deplib_matches=`eval \\$echo \"$library_names_spec\"`
-- set dummy $deplib_matches
-- deplib_match=$2
-- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-- newdeplibs="$newdeplibs $i"
-- else
-- droppeddeps=yes
-- echo
-- echo "*** Warning: This library needs some functionality provided by $i."
-- echo "*** I have the capability to make that library automatically link in when"
-- echo "*** you link to this library. But I can only do this if you have a"
-- echo "*** shared version of the library, which you do not appear to have."
-+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-+ case " $predeps $postdeps " in
-+ *" $i "*)
-+ newdeplibs="$newdeplibs $i"
-+ i=""
-+ ;;
-+ esac
-+ fi
-+ if test -n "$i" ; then
-+ libname=`eval \\$echo \"$libname_spec\"`
-+ deplib_matches=`eval \\$echo \"$library_names_spec\"`
-+ set dummy $deplib_matches
-+ deplib_match=$2
-+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-+ newdeplibs="$newdeplibs $i"
-+ else
-+ droppeddeps=yes
-+ $echo
-+ $echo "*** Warning: dynamic linker does not accept needed library $i."
-+ $echo "*** I have the capability to make that library automatically link in when"
-+ $echo "*** you link to this library. But I can only do this if you have a"
-+ $echo "*** shared version of the library, which you do not appear to have"
-+ $echo "*** because a test_compile did reveal that the linker did not use this one"
-+ $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
-+ fi
- fi
- else
- droppeddeps=yes
-- echo
-- echo "*** Warning! Library $i is needed by this library but I was not able to"
-- echo "*** make it link in! You will probably need to install it or some"
-- echo "*** library that it depends on before this library will be fully"
-- echo "*** functional. Installing it before continuing would be even better."
-+ $echo
-+ $echo "*** Warning! Library $i is needed by this library but I was not able to"
-+ $echo "*** make it link in! You will probably need to install it or some"
-+ $echo "*** library that it depends on before this library will be fully"
-+ $echo "*** functional. Installing it before continuing would be even better."
- fi
- else
- newdeplibs="$newdeplibs $i"
-@@ -1924,19 +3614,28 @@
- ;;
- file_magic*)
- set dummy $deplibs_check_method
-- file_magic_regex="`expr \"$deplibs_check_method\" : \"$2 \(.*\)\"`"
-+ file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- for a_deplib in $deplibs; do
-- name="`expr $a_deplib : '-l\(.*\)'`"
-+ name=`expr $a_deplib : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
-- if test "$name" != "" ; then
-- libname=`eval \\$echo \"$libname_spec\"`
-- for i in $lib_search_path; do
-- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-- for potent_lib in $potential_libs; do
-+ if test "$name" != "" && test "$name" != "0"; then
-+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-+ case " $predeps $postdeps " in
-+ *" $a_deplib "*)
-+ newdeplibs="$newdeplibs $a_deplib"
-+ a_deplib=""
-+ ;;
-+ esac
-+ fi
-+ if test -n "$a_deplib" ; then
-+ libname=`eval \\$echo \"$libname_spec\"`
-+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-+ for potent_lib in $potential_libs; do
- # Follow soft links.
- if ls -lLd "$potent_lib" 2>/dev/null \
- | grep " -> " >/dev/null; then
-- continue
-+ continue
- fi
- # The statement above tries to avoid entering an
- # endless loop below, in case of cyclic links.
-@@ -1945,28 +3644,88 @@
- # but so what?
- potlib="$potent_lib"
- while test -h "$potlib" 2>/dev/null; do
-- potliblink=`ls -ld $potlib | sed 's/.* -> //'`
-- case "$potliblink" in
-+ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
-+ case $potliblink in
- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
- esac
- done
- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
-- | sed 10q \
-- | egrep "$file_magic_regex" > /dev/null; then
-+ | ${SED} 10q \
-+ | $EGREP "$file_magic_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- break 2
- fi
-- done
-- done
-+ done
-+ done
-+ fi
-+ if test -n "$a_deplib" ; then
-+ droppeddeps=yes
-+ $echo
-+ $echo "*** Warning: linker path does not have real file for library $a_deplib."
-+ $echo "*** I have the capability to make that library automatically link in when"
-+ $echo "*** you link to this library. But I can only do this if you have a"
-+ $echo "*** shared version of the library, which you do not appear to have"
-+ $echo "*** because I did check the linker path looking for a file starting"
-+ if test -z "$potlib" ; then
-+ $echo "*** with $libname but no candidates were found. (...for file magic test)"
-+ else
-+ $echo "*** with $libname and none of the candidates passed a file format test"
-+ $echo "*** using a file magic. Last file checked: $potlib"
-+ fi
-+ fi
-+ else
-+ # Add a -L argument.
-+ newdeplibs="$newdeplibs $a_deplib"
-+ fi
-+ done # Gone through all deplibs.
-+ ;;
-+ match_pattern*)
-+ set dummy $deplibs_check_method
-+ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-+ for a_deplib in $deplibs; do
-+ name=`expr $a_deplib : '-l\(.*\)'`
-+ # If $name is empty we are operating on a -L argument.
-+ if test -n "$name" && test "$name" != "0"; then
-+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-+ case " $predeps $postdeps " in
-+ *" $a_deplib "*)
-+ newdeplibs="$newdeplibs $a_deplib"
-+ a_deplib=""
-+ ;;
-+ esac
-+ fi
-+ if test -n "$a_deplib" ; then
-+ libname=`eval \\$echo \"$libname_spec\"`
-+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-+ for potent_lib in $potential_libs; do
-+ potlib="$potent_lib" # see symlink-check above in file_magic test
-+ if eval $echo \"$potent_lib\" 2>/dev/null \
-+ | ${SED} 10q \
-+ | $EGREP "$match_pattern_regex" > /dev/null; then
-+ newdeplibs="$newdeplibs $a_deplib"
-+ a_deplib=""
-+ break 2
-+ fi
-+ done
-+ done
-+ fi
- if test -n "$a_deplib" ; then
- droppeddeps=yes
-- echo
-- echo "*** Warning: This library needs some functionality provided by $a_deplib."
-- echo "*** I have the capability to make that library automatically link in when"
-- echo "*** you link to this library. But I can only do this if you have a"
-- echo "*** shared version of the library, which you do not appear to have."
-+ $echo
-+ $echo "*** Warning: linker path does not have real file for library $a_deplib."
-+ $echo "*** I have the capability to make that library automatically link in when"
-+ $echo "*** you link to this library. But I can only do this if you have a"
-+ $echo "*** shared version of the library, which you do not appear to have"
-+ $echo "*** because I did check the linker path looking for a file starting"
-+ if test -z "$potlib" ; then
-+ $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
-+ else
-+ $echo "*** with $libname and none of the candidates passed a file format test"
-+ $echo "*** using a regex pattern. Last file checked: $potlib"
-+ fi
- fi
- else
- # Add a -L argument.
-@@ -1976,16 +3735,23 @@
- ;;
- none | unknown | *)
- newdeplibs=""
-- if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
-- -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' |
-- grep . >/dev/null; then
-- echo
-+ tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
-+ -e 's/ -[LR][^ ]*//g'`
-+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-+ for i in $predeps $postdeps ; do
-+ # can't use Xsed below, because $i might contain '/'
-+ tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
-+ done
-+ fi
-+ if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \
-+ | grep . >/dev/null; then
-+ $echo
- if test "X$deplibs_check_method" = "Xnone"; then
-- echo "*** Warning: inter-library dependencies are not supported in this platform."
-+ $echo "*** Warning: inter-library dependencies are not supported in this platform."
- else
-- echo "*** Warning: inter-library dependencies are not known to be supported."
-+ $echo "*** Warning: inter-library dependencies are not known to be supported."
- fi
-- echo "*** All declared inter-library dependencies are being dropped."
-+ $echo "*** All declared inter-library dependencies are being dropped."
- droppeddeps=yes
- fi
- ;;
-@@ -1996,19 +3762,26 @@
- libname=$libname_save
- name=$name_save
-
-+ case $host in
-+ *-*-rhapsody* | *-*-darwin1.[012])
-+ # On Rhapsody replace the C library is the System framework
-+ newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
-+ ;;
-+ esac
-+
- if test "$droppeddeps" = yes; then
- if test "$module" = yes; then
-- echo
-- echo "*** Warning: libtool could not satisfy all declared inter-library"
-- echo "*** dependencies of module $libname. Therefore, libtool will create"
-- echo "*** a static module, that should work as long as the dlopening"
-- echo "*** application is linked with the -dlopen flag."
-+ $echo
-+ $echo "*** Warning: libtool could not satisfy all declared inter-library"
-+ $echo "*** dependencies of module $libname. Therefore, libtool will create"
-+ $echo "*** a static module, that should work as long as the dlopening"
-+ $echo "*** application is linked with the -dlopen flag."
- if test -z "$global_symbol_pipe"; then
-- echo
-- echo "*** However, this would only work if libtool was able to extract symbol"
-- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-- echo "*** not find such a program. So, this module is probably useless."
-- echo "*** \`nm' from GNU binutils and a full rebuild may help."
-+ $echo
-+ $echo "*** However, this would only work if libtool was able to extract symbol"
-+ $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-+ $echo "*** not find such a program. So, this module is probably useless."
-+ $echo "*** \`nm' from GNU binutils and a full rebuild may help."
- fi
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
-@@ -2018,23 +3791,127 @@
- build_libtool_libs=no
- fi
- else
-- echo "*** The inter-library dependencies that have been dropped here will be"
-- echo "*** automatically added whenever a program is linked with this library"
-- echo "*** or is declared to -dlopen it."
-+ $echo "*** The inter-library dependencies that have been dropped here will be"
-+ $echo "*** automatically added whenever a program is linked with this library"
-+ $echo "*** or is declared to -dlopen it."
-+
-+ if test "$allow_undefined" = no; then
-+ $echo
-+ $echo "*** Since this library must not contain undefined symbols,"
-+ $echo "*** because either the platform does not support them or"
-+ $echo "*** it was explicitly requested with -no-undefined,"
-+ $echo "*** libtool will only create a static version of it."
-+ if test "$build_old_libs" = no; then
-+ oldlibs="$output_objdir/$libname.$libext"
-+ build_libtool_libs=module
-+ build_old_libs=yes
-+ else
-+ build_libtool_libs=no
-+ fi
-+ fi
- fi
- fi
- # Done checking deplibs!
- deplibs=$newdeplibs
- fi
-
-+
-+ # move library search paths that coincide with paths to not yet
-+ # installed libraries to the beginning of the library search list
-+ new_libs=
-+ for path in $notinst_path; do
-+ case " $new_libs " in
-+ *" -L$path/$objdir "*) ;;
-+ *)
-+ case " $deplibs " in
-+ *" -L$path/$objdir "*)
-+ new_libs="$new_libs -L$path/$objdir" ;;
-+ esac
-+ ;;
-+ esac
-+ done
-+ for deplib in $deplibs; do
-+ case $deplib in
-+ -L*)
-+ case " $new_libs " in
-+ *" $deplib "*) ;;
-+ *) new_libs="$new_libs $deplib" ;;
-+ esac
-+ ;;
-+ *) new_libs="$new_libs $deplib" ;;
-+ esac
-+ done
-+ deplibs="$new_libs"
-+
-+
- # All the library-specific variables (install_libdir is set above).
- library_names=
- old_library=
- dlname=
--
-+
- # Test again, we may have decided not to build it any more
- if test "$build_libtool_libs" = yes; then
-+ if test "$hardcode_into_libs" = yes; then
-+ # Hardcode the library paths
-+ hardcode_libdirs=
-+ dep_rpath=
-+ rpath="$finalize_rpath"
-+ test "$mode" != relink && rpath="$compile_rpath$rpath"
-+ for libdir in $rpath; do
-+ if test -n "$hardcode_libdir_flag_spec"; then
-+ if test -n "$hardcode_libdir_separator"; then
-+ if test -z "$hardcode_libdirs"; then
-+ hardcode_libdirs="$libdir"
-+ else
-+ # Just accumulate the unique libdirs.
-+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-+ ;;
-+ *)
-+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-+ ;;
-+ esac
-+ fi
-+ else
-+ eval flag=\"$hardcode_libdir_flag_spec\"
-+ dep_rpath="$dep_rpath $flag"
-+ fi
-+ elif test -n "$runpath_var"; then
-+ case "$perm_rpath " in
-+ *" $libdir "*) ;;
-+ *) perm_rpath="$perm_rpath $libdir" ;;
-+ esac
-+ fi
-+ done
-+ # Substitute the hardcoded libdirs into the rpath.
-+ if test -n "$hardcode_libdir_separator" &&
-+ test -n "$hardcode_libdirs"; then
-+ libdir="$hardcode_libdirs"
-+ if test -n "$hardcode_libdir_flag_spec_ld"; then
-+ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
-+ else
-+ eval dep_rpath=\"$hardcode_libdir_flag_spec\"
-+ fi
-+ fi
-+ if test -n "$runpath_var" && test -n "$perm_rpath"; then
-+ # We should set the runpath_var.
-+ rpath=
-+ for dir in $perm_rpath; do
-+ rpath="$rpath$dir:"
-+ done
-+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
-+ fi
-+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
-+ fi
-+
-+ shlibpath="$finalize_shlibpath"
-+ test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
-+ if test -n "$shlibpath"; then
-+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
-+ fi
-+
- # Get the real and link names of the library.
-+ eval shared_ext=\"$shrext_cmds\"
- eval library_names=\"$library_names_spec\"
- set dummy $library_names
- realname="$2"
-@@ -2045,30 +3922,17 @@
- else
- soname="$realname"
- fi
-+ if test -z "$dlname"; then
-+ dlname=$soname
-+ fi
-
- lib="$output_objdir/$realname"
-+ linknames=
- for link
- do
- linknames="$linknames $link"
- done
-
-- # Ensure that we have .o objects for linkers which dislike .lo
-- # (e.g. aix) in case we are running --disable-static
-- for obj in $libobjs; do
-- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-- if test "X$xdir" = "X$obj"; then
-- xdir="."
-- else
-- xdir="$xdir"
-- fi
-- baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-- oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
-- if test ! -f $xdir/$oldobj; then
-- $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
-- $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
-- fi
-- done
--
- # Use standard objects if they are pic
- test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-
-@@ -2078,17 +3942,29 @@
- $show "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
- $run $rm $export_symbols
-- eval cmds=\"$export_symbols_cmds\"
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-+ cmds=$export_symbols_cmds
-+ save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
-- $show "$cmd"
-- $run eval "$cmd" || exit $?
-+ eval cmd=\"$cmd\"
-+ if len=`expr "X$cmd" : ".*"` &&
-+ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-+ $show "$cmd"
-+ $run eval "$cmd" || exit $?
-+ skipped_export=false
-+ else
-+ # The command line is too long to execute in one step.
-+ $show "using reloadable object file for export list..."
-+ skipped_export=:
-+ # Break out early, otherwise skipped_export may be
-+ # set to false by a later but shorter cmd.
-+ break
-+ fi
- done
- IFS="$save_ifs"
- if test -n "$export_symbols_regex"; then
-- $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
-- $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-+ $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
-+ $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
- $show "$mv \"${export_symbols}T\" \"$export_symbols\""
- $run eval '$mv "${export_symbols}T" "$export_symbols"'
- fi
-@@ -2099,65 +3975,212 @@
- $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
- fi
-
-+ tmp_deplibs=
-+ for test_deplib in $deplibs; do
-+ case " $convenience " in
-+ *" $test_deplib "*) ;;
-+ *)
-+ tmp_deplibs="$tmp_deplibs $test_deplib"
-+ ;;
-+ esac
-+ done
-+ deplibs="$tmp_deplibs"
-+
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
-+ save_libobjs=$libobjs
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- else
- gentop="$output_objdir/${outputname}x"
-- $show "${rm}r $gentop"
-- $run ${rm}r "$gentop"
-- $show "mkdir $gentop"
-- $run mkdir "$gentop"
-- status=$?
-- if test $status -ne 0 && test ! -d "$gentop"; then
-- exit $status
-- fi
- generated="$generated $gentop"
-
-- for xlib in $convenience; do
-- # Extract the objects.
-- case "$xlib" in
-- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-- *) xabs=`pwd`"/$xlib" ;;
-- esac
-- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-- xdir="$gentop/$xlib"
--
-- $show "${rm}r $xdir"
-- $run ${rm}r "$xdir"
-- $show "mkdir $xdir"
-- $run mkdir "$xdir"
-- status=$?
-- if test $status -ne 0 && test ! -d "$xdir"; then
-- exit $status
-- fi
-- $show "(cd $xdir && $AR x $xabs)"
-- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
--
-- libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
-- done
-+ func_extract_archives $gentop $convenience
-+ libobjs="$libobjs $func_extract_archives_result"
- fi
- fi
--
-+
- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
- eval flag=\"$thread_safe_flag_spec\"
-- linkopts="$linkopts $flag"
-+ linker_flags="$linker_flags $flag"
-+ fi
-+
-+ # Make a backup of the uninstalled library when relinking
-+ if test "$mode" = relink; then
-+ $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
- fi
-
- # Do each of the archive commands.
-+ if test "$module" = yes && test -n "$module_cmds" ; then
-+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-+ eval test_cmds=\"$module_expsym_cmds\"
-+ cmds=$module_expsym_cmds
-+ else
-+ eval test_cmds=\"$module_cmds\"
-+ cmds=$module_cmds
-+ fi
-+ else
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-- eval cmds=\"$archive_expsym_cmds\"
-+ eval test_cmds=\"$archive_expsym_cmds\"
-+ cmds=$archive_expsym_cmds
-+ else
-+ eval test_cmds=\"$archive_cmds\"
-+ cmds=$archive_cmds
-+ fi
-+ fi
-+
-+ if test "X$skipped_export" != "X:" &&
-+ len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-+ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-+ :
- else
-- eval cmds=\"$archive_cmds\"
-+ # The command line is too long to link in one step, link piecewise.
-+ $echo "creating reloadable object files..."
-+
-+ # Save the value of $output and $libobjs because we want to
-+ # use them later. If we have whole_archive_flag_spec, we
-+ # want to use save_libobjs as it was before
-+ # whole_archive_flag_spec was expanded, because we can't
-+ # assume the linker understands whole_archive_flag_spec.
-+ # This may have to be revisited, in case too many
-+ # convenience libraries get linked in and end up exceeding
-+ # the spec.
-+ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
-+ save_libobjs=$libobjs
-+ fi
-+ save_output=$output
-+ output_la=`$echo "X$output" | $Xsed -e "$basename"`
-+
-+ # Clear the reloadable object creation command queue and
-+ # initialize k to one.
-+ test_cmds=
-+ concat_cmds=
-+ objlist=
-+ delfiles=
-+ last_robj=
-+ k=1
-+ output=$output_objdir/$output_la-${k}.$objext
-+ # Loop over the list of objects to be linked.
-+ for obj in $save_libobjs
-+ do
-+ eval test_cmds=\"$reload_cmds $objlist $last_robj\"
-+ if test "X$objlist" = X ||
-+ { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-+ test "$len" -le "$max_cmd_len"; }; then
-+ objlist="$objlist $obj"
-+ else
-+ # The command $test_cmds is almost too long, add a
-+ # command to the queue.
-+ if test "$k" -eq 1 ; then
-+ # The first file doesn't have a previous command to add.
-+ eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
-+ else
-+ # All subsequent reloadable object files will link in
-+ # the last one created.
-+ eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
-+ fi
-+ last_robj=$output_objdir/$output_la-${k}.$objext
-+ k=`expr $k + 1`
-+ output=$output_objdir/$output_la-${k}.$objext
-+ objlist=$obj
-+ len=1
-+ fi
-+ done
-+ # Handle the remaining objects by creating one last
-+ # reloadable object file. All subsequent reloadable object
-+ # files will link in the last one created.
-+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-+ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
-+
-+ if ${skipped_export-false}; then
-+ $show "generating symbol list for \`$libname.la'"
-+ export_symbols="$output_objdir/$libname.exp"
-+ $run $rm $export_symbols
-+ libobjs=$output
-+ # Append the command to create the export file.
-+ eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
-+ fi
-+
-+ # Set up a command to remove the reloadable object files
-+ # after they are used.
-+ i=0
-+ while test "$i" -lt "$k"
-+ do
-+ i=`expr $i + 1`
-+ delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
-+ done
-+
-+ $echo "creating a temporary reloadable object file: $output"
-+
-+ # Loop through the commands generated above and execute them.
-+ save_ifs="$IFS"; IFS='~'
-+ for cmd in $concat_cmds; do
-+ IFS="$save_ifs"
-+ $show "$cmd"
-+ $run eval "$cmd" || exit $?
-+ done
-+ IFS="$save_ifs"
-+
-+ libobjs=$output
-+ # Restore the value of output.
-+ output=$save_output
-+
-+ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
-+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-+ fi
-+ # Expand the library linking commands again to reset the
-+ # value of $libobjs for piecewise linking.
-+
-+ # Do each of the archive commands.
-+ if test "$module" = yes && test -n "$module_cmds" ; then
-+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-+ cmds=$module_expsym_cmds
-+ else
-+ cmds=$module_cmds
-+ fi
-+ else
-+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-+ cmds=$archive_expsym_cmds
-+ else
-+ cmds=$archive_cmds
-+ fi
-+ fi
-+
-+ # Append the command to remove the reloadable object files
-+ # to the just-reset $cmds.
-+ eval cmds=\"\$cmds~\$rm $delfiles\"
- fi
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-+ save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
-+ eval cmd=\"$cmd\"
- $show "$cmd"
-- $run eval "$cmd" || exit $?
-+ $run eval "$cmd" || {
-+ lt_exit=$?
-+
-+ # Restore the uninstalled library and exit
-+ if test "$mode" = relink; then
-+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
-+ fi
-+
-+ exit $lt_exit
-+ }
- done
- IFS="$save_ifs"
-
-+ # Restore the uninstalled library and exit
-+ if test "$mode" = relink; then
-+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
-+
-+ if test -n "$convenience"; then
-+ if test -z "$whole_archive_flag_spec"; then
-+ $show "${rm}r $gentop"
-+ $run ${rm}r "$gentop"
-+ fi
-+ fi
-+
-+ exit $EXIT_SUCCESS
-+ fi
-+
- # Create links to the real library.
- for linkname in $linknames; do
- if test "$realname" != "$linkname"; then
-@@ -2174,12 +4197,7 @@
- fi
- ;;
-
-- *.lo | *.o | *.obj)
-- if test -n "$link_against_libtool_libs"; then
-- $echo "$modename: error: cannot link libtool libraries into objects" 1>&2
-- exit 1
-- fi
--
-+ obj)
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
- fi
-@@ -2204,11 +4222,11 @@
- $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
- fi
-
-- case "$output" in
-+ case $output in
- *.lo)
-- if test -n "$objs"; then
-+ if test -n "$objs$old_deplibs"; then
- $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- fi
- libobj="$output"
- obj=`$echo "X$output" | $Xsed -e "$lo2o"`
-@@ -2230,56 +4248,29 @@
- gentop=
- # reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec
-- wl=
-+ wl=
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
- eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
- else
- gentop="$output_objdir/${obj}x"
-- $show "${rm}r $gentop"
-- $run ${rm}r "$gentop"
-- $show "mkdir $gentop"
-- $run mkdir "$gentop"
-- status=$?
-- if test $status -ne 0 && test ! -d "$gentop"; then
-- exit $status
-- fi
- generated="$generated $gentop"
-
-- for xlib in $convenience; do
-- # Extract the objects.
-- case "$xlib" in
-- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-- *) xabs=`pwd`"/$xlib" ;;
-- esac
-- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-- xdir="$gentop/$xlib"
--
-- $show "${rm}r $xdir"
-- $run ${rm}r "$xdir"
-- $show "mkdir $xdir"
-- $run mkdir "$xdir"
-- status=$?
-- if test $status -ne 0 && test ! -d "$xdir"; then
-- exit $status
-- fi
-- $show "(cd $xdir && $AR x $xabs)"
-- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
--
-- reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
-- done
-+ func_extract_archives $gentop $convenience
-+ reload_conv_objs="$reload_objs $func_extract_archives_result"
- fi
- fi
-
- # Create the old-style object.
-- reload_objs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs"
-+ reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-
- output="$obj"
-- eval cmds=\"$reload_cmds\"
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-+ cmds=$reload_cmds
-+ save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
-+ eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
-@@ -2292,7 +4283,7 @@
- $run ${rm}r $gentop
- fi
-
-- exit 0
-+ exit $EXIT_SUCCESS
- fi
-
- if test "$build_libtool_libs" != yes; then
-@@ -2303,37 +4294,24 @@
-
- # Create an invalid libtool object if no PIC, so that we don't
- # accidentally link it into a program.
-- $show "echo timestamp > $libobj"
-- $run eval "echo timestamp > $libobj" || exit $?
-- exit 0
-+ # $show "echo timestamp > $libobj"
-+ # $run eval "echo timestamp > $libobj" || exit $?
-+ exit $EXIT_SUCCESS
- fi
-
-- if test -n "$pic_flag"; then
-+ if test -n "$pic_flag" || test "$pic_mode" != default; then
- # Only do commands if we really have different PIC objects.
- reload_objs="$libobjs $reload_conv_objs"
- output="$libobj"
-- eval cmds=\"$reload_cmds\"
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-+ cmds=$reload_cmds
-+ save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
-+ eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-- else
-- # Just create a symlink.
-- $show $rm $libobj
-- $run $rm $libobj
-- xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
-- if test "X$xdir" = "X$libobj"; then
-- xdir="."
-- else
-- xdir="$xdir"
-- fi
-- baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
-- oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
-- $show "(cd $xdir && $LN_S $oldobj $baseobj)"
-- $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
- fi
-
- if test -n "$gentop"; then
-@@ -2341,11 +4319,13 @@
- $run ${rm}r $gentop
- fi
-
-- exit 0
-+ exit $EXIT_SUCCESS
- ;;
-
-- # Anything else should be a program.
-- *)
-+ prog)
-+ case $host in
-+ *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
-+ esac
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
- fi
-@@ -2355,20 +4335,66 @@
- fi
-
- if test "$preload" = yes; then
-- if test "$dlopen" = unknown && test "$dlopen_self" = unknown &&
-+ if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
- test "$dlopen_self_static" = unknown; then
- $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
-- fi
-+ fi
- fi
--
-+
-+ case $host in
-+ *-*-rhapsody* | *-*-darwin1.[012])
-+ # On Rhapsody replace the C library is the System framework
-+ compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-+ finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-+ ;;
-+ esac
-+
-+ case $host in
-+ *darwin*)
-+ # Don't allow lazy linking, it breaks C++ global constructors
-+ if test "$tagname" = CXX ; then
-+ compile_command="$compile_command ${wl}-bind_at_load"
-+ finalize_command="$finalize_command ${wl}-bind_at_load"
-+ fi
-+ ;;
-+ esac
-+
-+
-+ # move library search paths that coincide with paths to not yet
-+ # installed libraries to the beginning of the library search list
-+ new_libs=
-+ for path in $notinst_path; do
-+ case " $new_libs " in
-+ *" -L$path/$objdir "*) ;;
-+ *)
-+ case " $compile_deplibs " in
-+ *" -L$path/$objdir "*)
-+ new_libs="$new_libs -L$path/$objdir" ;;
-+ esac
-+ ;;
-+ esac
-+ done
-+ for deplib in $compile_deplibs; do
-+ case $deplib in
-+ -L*)
-+ case " $new_libs " in
-+ *" $deplib "*) ;;
-+ *) new_libs="$new_libs $deplib" ;;
-+ esac
-+ ;;
-+ *) new_libs="$new_libs $deplib" ;;
-+ esac
-+ done
-+ compile_deplibs="$new_libs"
-+
-+
-+ compile_command="$compile_command $compile_deplibs"
-+ finalize_command="$finalize_command $finalize_deplibs"
-+
- if test -n "$rpath$xrpath"; then
- # If the user specified any rpath flags, then add them.
- for libdir in $rpath $xrpath; do
- # This is the magic to use -rpath.
-- case "$compile_rpath " in
-- *" $libdir "*) ;;
-- *) compile_rpath="$compile_rpath $libdir" ;;
-- esac
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
-@@ -2386,7 +4412,7 @@
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
-- case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
-+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
-@@ -2404,6 +4430,19 @@
- *) perm_rpath="$perm_rpath $libdir" ;;
- esac
- fi
-+ case $host in
-+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-+ testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
-+ case :$dllsearchpath: in
-+ *":$libdir:"*) ;;
-+ *) dllsearchpath="$dllsearchpath:$libdir";;
-+ esac
-+ case :$dllsearchpath: in
-+ *":$testbindir:"*) ;;
-+ *) dllsearchpath="$dllsearchpath:$testbindir";;
-+ esac
-+ ;;
-+ esac
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
-@@ -2422,7 +4461,7 @@
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
-- case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
-+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
-@@ -2449,23 +4488,6 @@
- fi
- finalize_rpath="$rpath"
-
-- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
-- if test "X$output_objdir" = "X$output"; then
-- output_objdir="$objdir"
-- else
-- output_objdir="$output_objdir/$objdir"
-- fi
--
-- # Create the binary in the object directory, then wrap it.
-- if test ! -d $output_objdir; then
-- $show "$mkdir $output_objdir"
-- $run $mkdir $output_objdir
-- status=$?
-- if test $status -ne 0 && test ! -d $output_objdir; then
-- exit $status
-- fi
-- fi
--
- if test -n "$libobjs" && test "$build_old_libs" = yes; then
- # Transform all the library objects into standard objects.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-@@ -2482,7 +4504,7 @@
- fi
-
- if test -n "$dlsyms"; then
-- case "$dlsyms" in
-+ case $dlsyms in
- "") ;;
- *.c)
- # Discover the nlist of each of the dlfiles.
-@@ -2514,38 +4536,50 @@
- test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-
- # Add our own program objects to the symbol list.
-- progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-+ progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- for arg in $progfiles; do
- $show "extracting global C symbols from \`$arg'"
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -n "$exclude_expsyms"; then
-- $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-+ $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
- $run eval '$mv "$nlist"T "$nlist"'
- fi
--
-+
- if test -n "$export_symbols_regex"; then
-- $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-+ $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
- $run eval '$mv "$nlist"T "$nlist"'
- fi
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
-- export_symbols="$output_objdir/$output.exp"
-+ export_symbols="$output_objdir/$outputname.exp"
- $run $rm $export_symbols
-- $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-+ $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-+ case $host in
-+ *cygwin* | *mingw* )
-+ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-+ $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
-+ ;;
-+ esac
- else
-- $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
-- $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
-+ $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
-+ $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
- $run eval 'mv "$nlist"T "$nlist"'
-+ case $host in
-+ *cygwin* | *mingw* )
-+ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-+ $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
-+ ;;
-+ esac
- fi
- fi
-
- for arg in $dlprefiles; do
- $show "extracting global C symbols from \`$arg'"
-- name=`echo "$arg" | sed -e 's%^.*/%%'`
-- $run eval 'echo ": $name " >> "$nlist"'
-+ name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
-+ $run eval '$echo ": $name " >> "$nlist"'
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
-@@ -2554,12 +4588,18 @@
- test -f "$nlist" || : > "$nlist"
-
- if test -n "$exclude_expsyms"; then
-- egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-+ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
- $mv "$nlist"T "$nlist"
- fi
-
- # Try sorting and uniquifying the output.
-- if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
-+ if grep -v "^: " < "$nlist" |
-+ if sort -k 3 </dev/null >/dev/null 2>&1; then
-+ sort -k 3
-+ else
-+ sort +2
-+ fi |
-+ uniq > "$nlist"S; then
- :
- else
- grep -v "^: " < "$nlist" > "$nlist"S
-@@ -2568,7 +4608,7 @@
- if test -f "$nlist"S; then
- eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
- else
-- echo '/* NONE */' >> "$output_objdir/$dlsyms"
-+ $echo '/* NONE */' >> "$output_objdir/$dlsyms"
- fi
-
- $echo >> "$output_objdir/$dlsyms" "\
-@@ -2576,27 +4616,44 @@
- #undef lt_preloaded_symbols
-
- #if defined (__STDC__) && __STDC__
--# define lt_ptr_t void *
-+# define lt_ptr void *
- #else
--# define lt_ptr_t char *
-+# define lt_ptr char *
- # define const
- #endif
-
- /* The mapping between symbol names and symbols. */
-+"
-+
-+ case $host in
-+ *cygwin* | *mingw* )
-+ $echo >> "$output_objdir/$dlsyms" "\
-+/* DATA imports from DLLs on WIN32 can't be const, because
-+ runtime relocations are performed -- see ld's documentation
-+ on pseudo-relocs */
-+struct {
-+"
-+ ;;
-+ * )
-+ $echo >> "$output_objdir/$dlsyms" "\
- const struct {
-+"
-+ ;;
-+ esac
-+
-+
-+ $echo >> "$output_objdir/$dlsyms" "\
- const char *name;
-- lt_ptr_t address;
-+ lt_ptr address;
- }
- lt_preloaded_symbols[] =
- {\
- "
-
-- sed -n -e 's/^: \([^ ]*\) $/ {\"\1\", (lt_ptr_t) 0},/p' \
-- -e 's/^. \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr_t) \&\2},/p' \
-- < "$nlist" >> "$output_objdir/$dlsyms"
-+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
-
- $echo >> "$output_objdir/$dlsyms" "\
-- {0, (lt_ptr_t) 0}
-+ {0, (lt_ptr) 0}
- };
-
- /* This works around a problem in FreeBSD linker */
-@@ -2613,39 +4670,52 @@
- fi
-
- pic_flag_for_symtable=
-- case "$host" in
-+ case $host in
- # compiling the symbol table file with pic_flag works around
- # a FreeBSD bug that causes programs to crash when -lm is
- # linked before any other PIC object. But we must not use
- # pic_flag when linking with -static. The problem exists in
- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-+ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
- case "$compile_command " in
- *" -static "*) ;;
-- *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
-+ *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
- esac;;
- *-*-hpux*)
- case "$compile_command " in
- *" -static "*) ;;
-- *) pic_flag_for_symtable=" $pic_flag -DPIC";;
-+ *) pic_flag_for_symtable=" $pic_flag";;
- esac
- esac
-
- # Now compile the dynamic symbol file.
-- $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-- $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-+ $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-+ $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
- # Clean up the generated files.
- $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
- $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
- # Transform the symbol file into the correct name.
-- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-+ case $host in
-+ *cygwin* | *mingw* )
-+ if test -f "$output_objdir/${outputname}.def" ; then
-+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
-+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
-+ else
-+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-+ fi
-+ ;;
-+ * )
-+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-+ ;;
-+ esac
- ;;
- *)
- $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- ;;
- esac
- else
-@@ -2658,7 +4728,7 @@
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
- fi
-
-- if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then
-+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
- # Replace the output file specification.
- compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
- link_command="$compile_command$compile_rpath"
-@@ -2666,22 +4736,22 @@
- # We have no uninstalled library dependencies, so finalize right now.
- $show "$link_command"
- $run eval "$link_command"
-- status=$?
--
-+ exit_status=$?
-+
- # Delete the generated files.
- if test -n "$dlsyms"; then
- $show "$rm $output_objdir/${outputname}S.${objext}"
- $run $rm "$output_objdir/${outputname}S.${objext}"
- fi
-
-- exit $status
-+ exit $exit_status
- fi
-
- if test -n "$shlibpath_var"; then
- # We should set the shlibpath_var
- rpath=
- for dir in $temp_rpath; do
-- case "$dir" in
-+ case $dir in
- [\\/]* | [A-Za-z]:[\\/]*)
- # Absolute path.
- rpath="$rpath$dir:"
-@@ -2723,11 +4793,24 @@
- fi
- fi
-
-+ if test "$no_install" = yes; then
-+ # We don't need to create a wrapper script.
-+ link_command="$compile_var$compile_command$compile_rpath"
-+ # Replace the output file specification.
-+ link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-+ # Delete the old output file.
-+ $run $rm $output
-+ # Link the executable and exit
-+ $show "$link_command"
-+ $run eval "$link_command" || exit $?
-+ exit $EXIT_SUCCESS
-+ fi
-+
- if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
--
-+
- $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
- $echo "$modename: \`$output' will be relinked during installation" 1>&2
- else
-@@ -2747,7 +4830,7 @@
-
- # Replace the output file specification.
- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
--
-+
- # Delete the old output files.
- $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
-@@ -2759,14 +4842,26 @@
-
- # Quote the relink command for shipping.
- if test -n "$relink_command"; then
-+ # Preserve any variables that may affect compiler behavior
-+ for var in $variables_saved_for_relink; do
-+ if eval test -z \"\${$var+set}\"; then
-+ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
-+ elif eval var_value=\$$var; test -z "$var_value"; then
-+ relink_command="$var=; export $var; $relink_command"
-+ else
-+ var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-+ relink_command="$var=\"$var_value\"; export $var; $relink_command"
-+ fi
-+ done
-+ relink_command="(cd `pwd`; $relink_command)"
- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
- fi
-
- # Quote $echo for shipping.
-- if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
-- case "$0" in
-- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
-- *) qecho="$SHELL `pwd`/$0 --fallback-echo";;
-+ if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
-+ case $progpath in
-+ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
-+ *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
- esac
- qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
- else
-@@ -2778,10 +4873,376 @@
- # win32 will think the script is a binary if it has
- # a .exe suffix, so we strip it off here.
- case $output in
-- *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
-+ *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
-+ esac
-+ # test for cygwin because mv fails w/o .exe extensions
-+ case $host in
-+ *cygwin*)
-+ exeext=.exe
-+ outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
-+ *) exeext= ;;
- esac
-- $rm $output
-- trap "$rm $output; exit 1" 1 2 15
-+ case $host in
-+ *cygwin* | *mingw* )
-+ output_name=`basename $output`
-+ output_path=`dirname $output`
-+ cwrappersource="$output_path/$objdir/lt-$output_name.c"
-+ cwrapper="$output_path/$output_name.exe"
-+ $rm $cwrappersource $cwrapper
-+ trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-+
-+ cat > $cwrappersource <<EOF
-+
-+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
-+ Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-+
-+ The $output program cannot be directly executed until all the libtool
-+ libraries that it depends on are installed.
-+
-+ This wrapper executable should never be moved out of the build directory.
-+ If it is, it will not operate correctly.
-+
-+ Currently, it simply execs the wrapper *script* "/bin/sh $output",
-+ but could eventually absorb all of the scripts functionality and
-+ exec $objdir/$outputname directly.
-+*/
-+EOF
-+ cat >> $cwrappersource<<"EOF"
-+#include <stdio.h>
-+#include <stdlib.h>
-+#include <unistd.h>
-+#include <malloc.h>
-+#include <stdarg.h>
-+#include <assert.h>
-+#include <string.h>
-+#include <ctype.h>
-+#include <sys/stat.h>
-+
-+#if defined(PATH_MAX)
-+# define LT_PATHMAX PATH_MAX
-+#elif defined(MAXPATHLEN)
-+# define LT_PATHMAX MAXPATHLEN
-+#else
-+# define LT_PATHMAX 1024
-+#endif
-+
-+#ifndef DIR_SEPARATOR
-+# define DIR_SEPARATOR '/'
-+# define PATH_SEPARATOR ':'
-+#endif
-+
-+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
-+ defined (__OS2__)
-+# define HAVE_DOS_BASED_FILE_SYSTEM
-+# ifndef DIR_SEPARATOR_2
-+# define DIR_SEPARATOR_2 '\\'
-+# endif
-+# ifndef PATH_SEPARATOR_2
-+# define PATH_SEPARATOR_2 ';'
-+# endif
-+#endif
-+
-+#ifndef DIR_SEPARATOR_2
-+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-+#else /* DIR_SEPARATOR_2 */
-+# define IS_DIR_SEPARATOR(ch) \
-+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-+#endif /* DIR_SEPARATOR_2 */
-+
-+#ifndef PATH_SEPARATOR_2
-+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-+#else /* PATH_SEPARATOR_2 */
-+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-+#endif /* PATH_SEPARATOR_2 */
-+
-+#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
-+#define XFREE(stale) do { \
-+ if (stale) { free ((void *) stale); stale = 0; } \
-+} while (0)
-+
-+/* -DDEBUG is fairly common in CFLAGS. */
-+#undef DEBUG
-+#if defined DEBUGWRAPPER
-+# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
-+#else
-+# define DEBUG(format, ...)
-+#endif
-+
-+const char *program_name = NULL;
-+
-+void * xmalloc (size_t num);
-+char * xstrdup (const char *string);
-+const char * base_name (const char *name);
-+char * find_executable(const char *wrapper);
-+int check_executable(const char *path);
-+char * strendzap(char *str, const char *pat);
-+void lt_fatal (const char *message, ...);
-+
-+int
-+main (int argc, char *argv[])
-+{
-+ char **newargz;
-+ int i;
-+
-+ program_name = (char *) xstrdup (base_name (argv[0]));
-+ DEBUG("(main) argv[0] : %s\n",argv[0]);
-+ DEBUG("(main) program_name : %s\n",program_name);
-+ newargz = XMALLOC(char *, argc+2);
-+EOF
-+
-+ cat >> $cwrappersource <<EOF
-+ newargz[0] = (char *) xstrdup("$SHELL");
-+EOF
-+
-+ cat >> $cwrappersource <<"EOF"
-+ newargz[1] = find_executable(argv[0]);
-+ if (newargz[1] == NULL)
-+ lt_fatal("Couldn't find %s", argv[0]);
-+ DEBUG("(main) found exe@: %s\n",newargz[1]);
-+ /* we know the script has the same name, without the .exe */
-+ /* so make sure newargz[1] doesn't end in .exe */
-+ strendzap(newargz[1],".exe");
-+ for (i = 1; i < argc; i++)
-+ newargz[i+1] = xstrdup(argv[i]);
-+ newargz[argc+1] = NULL;
-+
-+ for (i=0; i<argc+1; i++)
-+ {
-+ DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]);
-+ ;
-+ }
-+
-+EOF
-+
-+ case $host_os in
-+ mingw*)
-+ cat >> $cwrappersource <<EOF
-+ execv("$SHELL",(char const **)newargz);
-+EOF
-+ ;;
-+ *)
-+ cat >> $cwrappersource <<EOF
-+ execv("$SHELL",newargz);
-+EOF
-+ ;;
-+ esac
-+
-+ cat >> $cwrappersource <<"EOF"
-+ return 127;
-+}
-+
-+void *
-+xmalloc (size_t num)
-+{
-+ void * p = (void *) malloc (num);
-+ if (!p)
-+ lt_fatal ("Memory exhausted");
-+
-+ return p;
-+}
-+
-+char *
-+xstrdup (const char *string)
-+{
-+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
-+;
-+}
-+
-+const char *
-+base_name (const char *name)
-+{
-+ const char *base;
-+
-+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-+ /* Skip over the disk name in MSDOS pathnames. */
-+ if (isalpha ((unsigned char)name[0]) && name[1] == ':')
-+ name += 2;
-+#endif
-+
-+ for (base = name; *name; name++)
-+ if (IS_DIR_SEPARATOR (*name))
-+ base = name + 1;
-+ return base;
-+}
-+
-+int
-+check_executable(const char * path)
-+{
-+ struct stat st;
-+
-+ DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
-+ if ((!path) || (!*path))
-+ return 0;
-+
-+ if ((stat (path, &st) >= 0) &&
-+ (
-+ /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
-+#if defined (S_IXOTH)
-+ ((st.st_mode & S_IXOTH) == S_IXOTH) ||
-+#endif
-+#if defined (S_IXGRP)
-+ ((st.st_mode & S_IXGRP) == S_IXGRP) ||
-+#endif
-+ ((st.st_mode & S_IXUSR) == S_IXUSR))
-+ )
-+ return 1;
-+ else
-+ return 0;
-+}
-+
-+/* Searches for the full path of the wrapper. Returns
-+ newly allocated full path name if found, NULL otherwise */
-+char *
-+find_executable (const char* wrapper)
-+{
-+ int has_slash = 0;
-+ const char* p;
-+ const char* p_next;
-+ /* static buffer for getcwd */
-+ char tmp[LT_PATHMAX + 1];
-+ int tmp_len;
-+ char* concat_name;
-+
-+ DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
-+
-+ if ((wrapper == NULL) || (*wrapper == '\0'))
-+ return NULL;
-+
-+ /* Absolute path? */
-+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-+ if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
-+ {
-+ concat_name = xstrdup (wrapper);
-+ if (check_executable(concat_name))
-+ return concat_name;
-+ XFREE(concat_name);
-+ }
-+ else
-+ {
-+#endif
-+ if (IS_DIR_SEPARATOR (wrapper[0]))
-+ {
-+ concat_name = xstrdup (wrapper);
-+ if (check_executable(concat_name))
-+ return concat_name;
-+ XFREE(concat_name);
-+ }
-+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-+ }
-+#endif
-+
-+ for (p = wrapper; *p; p++)
-+ if (*p == '/')
-+ {
-+ has_slash = 1;
-+ break;
-+ }
-+ if (!has_slash)
-+ {
-+ /* no slashes; search PATH */
-+ const char* path = getenv ("PATH");
-+ if (path != NULL)
-+ {
-+ for (p = path; *p; p = p_next)
-+ {
-+ const char* q;
-+ size_t p_len;
-+ for (q = p; *q; q++)
-+ if (IS_PATH_SEPARATOR(*q))
-+ break;
-+ p_len = q - p;
-+ p_next = (*q == '\0' ? q : q + 1);
-+ if (p_len == 0)
-+ {
-+ /* empty path: current directory */
-+ if (getcwd (tmp, LT_PATHMAX) == NULL)
-+ lt_fatal ("getcwd failed");
-+ tmp_len = strlen(tmp);
-+ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
-+ memcpy (concat_name, tmp, tmp_len);
-+ concat_name[tmp_len] = '/';
-+ strcpy (concat_name + tmp_len + 1, wrapper);
-+ }
-+ else
-+ {
-+ concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
-+ memcpy (concat_name, p, p_len);
-+ concat_name[p_len] = '/';
-+ strcpy (concat_name + p_len + 1, wrapper);
-+ }
-+ if (check_executable(concat_name))
-+ return concat_name;
-+ XFREE(concat_name);
-+ }
-+ }
-+ /* not found in PATH; assume curdir */
-+ }
-+ /* Relative path | not found in path: prepend cwd */
-+ if (getcwd (tmp, LT_PATHMAX) == NULL)
-+ lt_fatal ("getcwd failed");
-+ tmp_len = strlen(tmp);
-+ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
-+ memcpy (concat_name, tmp, tmp_len);
-+ concat_name[tmp_len] = '/';
-+ strcpy (concat_name + tmp_len + 1, wrapper);
-+
-+ if (check_executable(concat_name))
-+ return concat_name;
-+ XFREE(concat_name);
-+ return NULL;
-+}
-+
-+char *
-+strendzap(char *str, const char *pat)
-+{
-+ size_t len, patlen;
-+
-+ assert(str != NULL);
-+ assert(pat != NULL);
-+
-+ len = strlen(str);
-+ patlen = strlen(pat);
-+
-+ if (patlen <= len)
-+ {
-+ str += len - patlen;
-+ if (strcmp(str, pat) == 0)
-+ *str = '\0';
-+ }
-+ return str;
-+}
-+
-+static void
-+lt_error_core (int exit_status, const char * mode,
-+ const char * message, va_list ap)
-+{
-+ fprintf (stderr, "%s: %s: ", program_name, mode);
-+ vfprintf (stderr, message, ap);
-+ fprintf (stderr, ".\n");
-+
-+ if (exit_status >= 0)
-+ exit (exit_status);
-+}
-+
-+void
-+lt_fatal (const char *message, ...)
-+{
-+ va_list ap;
-+ va_start (ap, message);
-+ lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
-+ va_end (ap);
-+}
-+EOF
-+ # we should really use a build-platform specific compiler
-+ # here, but OTOH, the wrappers (shell script and this C one)
-+ # are only useful if you want to execute the "real" binary.
-+ # Since the "real" binary is built for $host, then this
-+ # wrapper might as well be built for $host, too.
-+ $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
-+ ;;
-+ esac
-+ $rm $output
-+ trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
-
- $echo > $output "\
- #! $SHELL
-@@ -2797,19 +5258,19 @@
-
- # Sed substitution that helps us do robust quoting. It backslashifies
- # metacharacters that are still active within double-quoted strings.
--Xsed='sed -e 1s/^X//'
-+Xsed='${SED} -e 1s/^X//'
- sed_quote_subst='$sed_quote_subst'
-
- # The HP-UX ksh and POSIX shell print the target directory to stdout
- # if CDPATH is set.
--if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
-+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
- relink_command=\"$relink_command\"
-
- # This environment variable determines our operation mode.
- if test \"\$libtool_install_magic\" = \"$magic\"; then
- # install mode needs the following variable:
-- link_against_libtool_libs='$link_against_libtool_libs'
-+ notinst_deplibs='$notinst_deplibs'
- else
- # When we are sourced in execute mode, \$file and \$echo are already set.
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
-@@ -2835,20 +5296,20 @@
- test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
- # Follow symbolic links until we get to the real thisdir.
-- file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
-+ file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
- while test -n \"\$file\"; do
- destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
- # If there was a directory component, then change thisdir.
- if test \"x\$destdir\" != \"x\$file\"; then
- case \"\$destdir\" in
-- [\\/]* | [A-Za-z]:[\\/]*) thisdir=\"\$destdir\" ;;
-+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
- *) thisdir=\"\$thisdir/\$destdir\" ;;
- esac
- fi
-
- file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-- file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
-+ file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
- done
-
- # Try to get the absolute directory name.
-@@ -2857,12 +5318,12 @@
- "
-
- if test "$fast_install" = yes; then
-- echo >> $output "\
-- program=lt-'$outputname'
-+ $echo >> $output "\
-+ program=lt-'$outputname'$exeext
- progdir=\"\$thisdir/$objdir\"
--
-+
- if test ! -f \"\$progdir/\$program\" || \\
-- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
-+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
- test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
- file=\"\$\$-\$program\"
-@@ -2873,14 +5334,15 @@
- $rm \"\$progdir/\$file\"
- fi"
-
-- echo >> $output "\
-+ $echo >> $output "\
-
- # relink executable if necessary
- if test -n \"\$relink_command\"; then
-- if (cd \"\$thisdir\" && eval \$relink_command); then :
-+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
- else
-+ $echo \"\$relink_command_output\" >&2
- $rm \"\$progdir/\$file\"
-- exit 1
-+ exit $EXIT_FAILURE
- fi
- fi
-
-@@ -2890,13 +5352,13 @@
- $rm \"\$progdir/\$file\"
- fi"
- else
-- echo >> $output "\
-+ $echo >> $output "\
- program='$outputname'
- progdir=\"\$thisdir/$objdir\"
- "
- fi
-
-- echo >> $output "\
-+ $echo >> $output "\
-
- if test -f \"\$progdir/\$program\"; then"
-
-@@ -2927,39 +5389,35 @@
- # Run the actual program with our arguments.
- "
- case $host in
-- *-*-cygwin* | *-*-mingw | *-*-os2*)
-- # win32 systems need to use the prog path for dll
-- # lookup to work
-+ # Backslashes separate directories on plain windows
-+ *-*-mingw | *-*-os2*)
- $echo >> $output "\
-- exec \$progdir\\\\\$program \${1+\"\$@\"}
-+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
- "
- ;;
-+
- *)
- $echo >> $output "\
-- # Export the path to the program.
-- PATH=\"\$progdir:\$PATH\"
-- export PATH
--
-- exec \$program \${1+\"\$@\"}
-+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
- "
- ;;
- esac
- $echo >> $output "\
- \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
-- exit 1
-+ exit $EXIT_FAILURE
- fi
- else
- # The program doesn't exist.
-- \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
-+ \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
- \$echo \"This script is just a wrapper for \$program.\" 1>&2
-- echo \"See the $PACKAGE documentation for more information.\" 1>&2
-- exit 1
-+ $echo \"See the $PACKAGE documentation for more information.\" 1>&2
-+ exit $EXIT_FAILURE
- fi
- fi\
- "
- chmod +x $output
- fi
-- exit 0
-+ exit $EXIT_SUCCESS
- ;;
- esac
-
-@@ -2975,74 +5433,130 @@
- oldobjs="$libobjs_save"
- build_libtool_libs=no
- else
-- oldobjs="$objs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
-+ oldobjs="$old_deplibs $non_pic_objects"
- fi
- addlibs="$old_convenience"
- fi
-
- if test -n "$addlibs"; then
- gentop="$output_objdir/${outputname}x"
-- $show "${rm}r $gentop"
-- $run ${rm}r "$gentop"
-- $show "mkdir $gentop"
-- $run mkdir "$gentop"
-- status=$?
-- if test $status -ne 0 && test ! -d "$gentop"; then
-- exit $status
-- fi
- generated="$generated $gentop"
--
-- # Add in members from convenience archives.
-- for xlib in $addlibs; do
-- # Extract the objects.
-- case "$xlib" in
-- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-- *) xabs=`pwd`"/$xlib" ;;
-- esac
-- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-- xdir="$gentop/$xlib"
--
-- $show "${rm}r $xdir"
-- $run ${rm}r "$xdir"
-- $show "mkdir $xdir"
-- $run mkdir "$xdir"
-- status=$?
-- if test $status -ne 0 && test ! -d "$xdir"; then
-- exit $status
-- fi
-- $show "(cd $xdir && $AR x $xabs)"
-- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
-- oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
-- done
-+ func_extract_archives $gentop $addlibs
-+ oldobjs="$oldobjs $func_extract_archives_result"
- fi
-
- # Do each command in the archive commands.
- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-- eval cmds=\"$old_archive_from_new_cmds\"
-+ cmds=$old_archive_from_new_cmds
- else
-- # Ensure that we have .o objects in place in case we decided
-- # not to build a shared library, and have fallen back to building
-- # static libs even though --disable-static was passed!
-- for oldobj in $oldobjs; do
-- if test ! -f $oldobj; then
-- xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
-- if test "X$xdir" = "X$oldobj"; then
-- xdir="."
-- else
-- xdir="$xdir"
-- fi
-- baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
-- obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
-- $show "(cd $xdir && ${LN_S} $obj $baseobj)"
-- $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
-+ # POSIX demands no paths to be encoded in archives. We have
-+ # to avoid creating archives with duplicate basenames if we
-+ # might have to extract them afterwards, e.g., when creating a
-+ # static archive out of a convenience library, or when linking
-+ # the entirety of a libtool archive into another (currently
-+ # not supported by libtool).
-+ if (for obj in $oldobjs
-+ do
-+ $echo "X$obj" | $Xsed -e 's%^.*/%%'
-+ done | sort | sort -uc >/dev/null 2>&1); then
-+ :
-+ else
-+ $echo "copying selected object files to avoid basename conflicts..."
-+
-+ if test -z "$gentop"; then
-+ gentop="$output_objdir/${outputname}x"
-+ generated="$generated $gentop"
-+
-+ $show "${rm}r $gentop"
-+ $run ${rm}r "$gentop"
-+ $show "$mkdir $gentop"
-+ $run $mkdir "$gentop"
-+ exit_status=$?
-+ if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
-+ exit $exit_status
-+ fi
- fi
-- done
-+
-+ save_oldobjs=$oldobjs
-+ oldobjs=
-+ counter=1
-+ for obj in $save_oldobjs
-+ do
-+ objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-+ case " $oldobjs " in
-+ " ") oldobjs=$obj ;;
-+ *[\ /]"$objbase "*)
-+ while :; do
-+ # Make sure we don't pick an alternate name that also
-+ # overlaps.
-+ newobj=lt$counter-$objbase
-+ counter=`expr $counter + 1`
-+ case " $oldobjs " in
-+ *[\ /]"$newobj "*) ;;
-+ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
-+ esac
-+ done
-+ $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
-+ $run ln "$obj" "$gentop/$newobj" ||
-+ $run cp "$obj" "$gentop/$newobj"
-+ oldobjs="$oldobjs $gentop/$newobj"
-+ ;;
-+ *) oldobjs="$oldobjs $obj" ;;
-+ esac
-+ done
-+ fi
-
- eval cmds=\"$old_archive_cmds\"
-+
-+ if len=`expr "X$cmds" : ".*"` &&
-+ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-+ cmds=$old_archive_cmds
-+ else
-+ # the command line is too long to link in one step, link in parts
-+ $echo "using piecewise archive linking..."
-+ save_RANLIB=$RANLIB
-+ RANLIB=:
-+ objlist=
-+ concat_cmds=
-+ save_oldobjs=$oldobjs
-+
-+ # Is there a better way of finding the last object in the list?
-+ for obj in $save_oldobjs
-+ do
-+ last_oldobj=$obj
-+ done
-+ for obj in $save_oldobjs
-+ do
-+ oldobjs="$objlist $obj"
-+ objlist="$objlist $obj"
-+ eval test_cmds=\"$old_archive_cmds\"
-+ if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-+ test "$len" -le "$max_cmd_len"; then
-+ :
-+ else
-+ # the above command should be used before it gets too long
-+ oldobjs=$objlist
-+ if test "$obj" = "$last_oldobj" ; then
-+ RANLIB=$save_RANLIB
-+ fi
-+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-+ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
-+ objlist=
-+ fi
-+ done
-+ RANLIB=$save_RANLIB
-+ oldobjs=$objlist
-+ if test "X$oldobjs" = "X" ; then
-+ eval cmds=\"\$concat_cmds\"
-+ else
-+ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
-+ fi
-+ fi
- fi
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-+ save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
-+ eval cmd=\"$cmd\"
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
-@@ -3056,20 +5570,31 @@
- fi
-
- # Now create the libtool archive.
-- case "$output" in
-+ case $output in
- *.la)
- old_library=
- test "$build_old_libs" = yes && old_library="$libname.$libext"
- $show "creating $output"
-
-- if test -n "$xrpath"; then
-- temp_xrpath=
-- for libdir in $xrpath; do
-- temp_xrpath="$temp_xrpath -R$libdir"
-- done
-- dependency_libs="$temp_xrpath $dependency_libs"
-+ # Preserve any variables that may affect compiler behavior
-+ for var in $variables_saved_for_relink; do
-+ if eval test -z \"\${$var+set}\"; then
-+ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
-+ elif eval var_value=\$$var; test -z "$var_value"; then
-+ relink_command="$var=; export $var; $relink_command"
-+ else
-+ var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-+ relink_command="$var=\"$var_value\"; export $var; $relink_command"
-+ fi
-+ done
-+ # Quote the link command for shipping.
-+ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-+ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-+ if test "$hardcode_automatic" = yes ; then
-+ relink_command=
- fi
-
-+
- # Only create the output if not a dry run.
- if test -z "$run"; then
- for installed in no yes; do
-@@ -3078,8 +5603,71 @@
- break
- fi
- output="$output_objdir/$outputname"i
-+ # Replace all uninstalled libtool libraries with the installed ones
-+ newdependency_libs=
-+ for deplib in $dependency_libs; do
-+ case $deplib in
-+ *.la)
-+ name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
-+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-+ if test -z "$libdir"; then
-+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-+ exit $EXIT_FAILURE
-+ fi
-+ newdependency_libs="$newdependency_libs $libdir/$name"
-+ ;;
-+ *) newdependency_libs="$newdependency_libs $deplib" ;;
-+ esac
-+ done
-+ dependency_libs="$newdependency_libs"
-+ newdlfiles=
-+ for lib in $dlfiles; do
-+ name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-+ if test -z "$libdir"; then
-+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-+ exit $EXIT_FAILURE
-+ fi
-+ newdlfiles="$newdlfiles $libdir/$name"
-+ done
-+ dlfiles="$newdlfiles"
-+ newdlprefiles=
-+ for lib in $dlprefiles; do
-+ name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-+ if test -z "$libdir"; then
-+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-+ exit $EXIT_FAILURE
-+ fi
-+ newdlprefiles="$newdlprefiles $libdir/$name"
-+ done
-+ dlprefiles="$newdlprefiles"
-+ else
-+ newdlfiles=
-+ for lib in $dlfiles; do
-+ case $lib in
-+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
-+ *) abs=`pwd`"/$lib" ;;
-+ esac
-+ newdlfiles="$newdlfiles $abs"
-+ done
-+ dlfiles="$newdlfiles"
-+ newdlprefiles=
-+ for lib in $dlprefiles; do
-+ case $lib in
-+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
-+ *) abs=`pwd`"/$lib" ;;
-+ esac
-+ newdlprefiles="$newdlprefiles $abs"
-+ done
-+ dlprefiles="$newdlprefiles"
- fi
- $rm $output
-+ # place dlname in correct position for cygwin
-+ tdlname=$dlname
-+ case $host,$output,$installed,$module,$dlname in
-+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
-+ esac
- $echo > $output "\
- # $outputname - a libtool library file
- # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-@@ -3088,7 +5676,7 @@
- # It is necessary for linking the library.
-
- # The name that we can dlopen(3).
--dlname='$dlname'
-+dlname='$tdlname'
-
- # Names of this library.
- library_names='$library_names'
-@@ -3107,19 +5695,29 @@
- # Is this an already installed library?
- installed=$installed
-
-+# Should we warn about portability when linking against -modules?
-+shouldnotlink=$module
-+
-+# Files to dlopen/dlpreopen
-+dlopen='$dlfiles'
-+dlpreopen='$dlprefiles'
-+
- # Directory that this library needs to be installed in:
--libdir='$install_libdir'\
--"
-+libdir='$install_libdir'"
-+ if test "$installed" = no && test "$need_relink" = yes; then
-+ $echo >> $output "\
-+relink_command=\"$relink_command\""
-+ fi
- done
- fi
-
- # Do a symbolic link so that the libtool archive can be found in
- # LD_LIBRARY_PATH before the program is installed.
- $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
-- $run eval "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" || exit $?
-+ $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
- ;;
- esac
-- exit 0
-+ exit $EXIT_SUCCESS
- ;;
-
- # libtool install mode
-@@ -3128,11 +5726,13 @@
-
- # There may be an optional sh(1) argument at the beginning of
- # install_prog (especially on Windows NT).
-- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh; then
-+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
-+ # Allow the use of GNU shtool's install command.
-+ $echo "X$nonopt" | grep shtool > /dev/null; then
- # Aesthetically quote it.
- arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
-- case "$arg" in
-- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
-+ case $arg in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
-@@ -3141,14 +5741,14 @@
- shift
- else
- install_prog=
-- arg="$nonopt"
-+ arg=$nonopt
- fi
-
- # The real first argument should be the name of the installation program.
- # Aesthetically quote it.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-- case "$arg" in
-- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
-+ case $arg in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
-@@ -3166,28 +5766,31 @@
- do
- if test -n "$dest"; then
- files="$files $dest"
-- dest="$arg"
-+ dest=$arg
- continue
- fi
-
-- case "$arg" in
-+ case $arg in
- -d) isdir=yes ;;
-- -f) prev="-f" ;;
-- -g) prev="-g" ;;
-- -m) prev="-m" ;;
-- -o) prev="-o" ;;
-+ -f)
-+ case " $install_prog " in
-+ *[\\\ /]cp\ *) ;;
-+ *) prev=$arg ;;
-+ esac
-+ ;;
-+ -g | -m | -o) prev=$arg ;;
- -s)
- stripme=" -s"
- continue
- ;;
-- -*) ;;
--
-+ -*)
-+ ;;
- *)
- # If the previous option needed an argument, then skip it.
- if test -n "$prev"; then
- prev=
- else
-- dest="$arg"
-+ dest=$arg
- continue
- fi
- ;;
-@@ -3195,8 +5798,8 @@
-
- # Aesthetically quote the argument.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-- case "$arg" in
-- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
-+ case $arg in
-+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
-@@ -3206,13 +5809,13 @@
- if test -z "$install_prog"; then
- $echo "$modename: you must specify an install program" 1>&2
- $echo "$help" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- fi
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prev' option requires an argument" 1>&2
- $echo "$help" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- fi
-
- if test -z "$files"; then
-@@ -3222,7 +5825,7 @@
- $echo "$modename: you must specify a destination" 1>&2
- fi
- $echo "$help" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- fi
-
- # Strip any trailing slash from the destination.
-@@ -3240,22 +5843,22 @@
-
- # Not a directory, so check to see that there is only one file specified.
- set dummy $files
-- if test $# -gt 2; then
-+ if test "$#" -gt 2; then
- $echo "$modename: \`$dest' is not a directory" 1>&2
- $echo "$help" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- fi
- fi
-- case "$destdir" in
-+ case $destdir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- for file in $files; do
-- case "$file" in
-+ case $file in
- *.lo) ;;
- *)
- $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
- $echo "$help" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- ;;
- esac
- done
-@@ -3272,25 +5875,26 @@
- for file in $files; do
-
- # Do each installation.
-- case "$file" in
-- *.a | *.lib)
-+ case $file in
-+ *.$libext)
- # Do the static libraries later.
- staticlibs="$staticlibs $file"
- ;;
-
- *.la)
- # Check to see that this really is a libtool archive.
-- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-+ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- fi
-
- library_names=
- old_library=
-+ relink_command=
- # If there is no directory component, then add one.
-- case "$file" in
-+ case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-@@ -3309,10 +5913,41 @@
- esac
- fi
-
-- dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/"
-+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
- test "X$dir" = "X$file/" && dir=
- dir="$dir$objdir"
-
-+ if test -n "$relink_command"; then
-+ # Determine the prefix the user has applied to our future dir.
-+ inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
-+
-+ # Don't allow the user to place us outside of our expected
-+ # location b/c this prevents finding dependent libraries that
-+ # are installed to the same prefix.
-+ # At present, this check doesn't affect windows .dll's that
-+ # are installed into $libdir/../bin (currently, that works fine)
-+ # but it's something to keep an eye on.
-+ if test "$inst_prefix_dir" = "$destdir"; then
-+ $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-+ exit $EXIT_FAILURE
-+ fi
-+
-+ if test -n "$inst_prefix_dir"; then
-+ # Stick the inst_prefix_dir data into the link command.
-+ relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
-+ else
-+ relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
-+ fi
-+
-+ $echo "$modename: warning: relinking \`$file'" 1>&2
-+ $show "$relink_command"
-+ if $run eval "$relink_command"; then :
-+ else
-+ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-+ exit $EXIT_FAILURE
-+ fi
-+ fi
-+
- # See the names of the shared library.
- set dummy $library_names
- if test -n "$2"; then
-@@ -3320,29 +5955,49 @@
- shift
- shift
-
-+ srcname="$realname"
-+ test -n "$relink_command" && srcname="$realname"T
-+
- # Install the shared library and build the symlinks.
-- $show "$install_prog $dir/$realname $destdir/$realname"
-- $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $?
-+ $show "$install_prog $dir/$srcname $destdir/$realname"
-+ $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
-+ if test -n "$stripme" && test -n "$striplib"; then
-+ $show "$striplib $destdir/$realname"
-+ $run eval "$striplib $destdir/$realname" || exit $?
-+ fi
-
-- if test $# -gt 0; then
-+ if test "$#" -gt 0; then
- # Delete the old symlinks, and create new ones.
-+ # Try `ln -sf' first, because the `ln' binary might depend on
-+ # the symlink we replace! Solaris /bin/ln does not understand -f,
-+ # so we also need to try rm && ln -s.
- for linkname
- do
- if test "$linkname" != "$realname"; then
-- $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
-- $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
-+ $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
-+ $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
- fi
- done
- fi
-
- # Do each command in the postinstall commands.
- lib="$destdir/$realname"
-- eval cmds=\"$postinstall_cmds\"
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-+ cmds=$postinstall_cmds
-+ save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
-+ eval cmd=\"$cmd\"
- $show "$cmd"
-- $run eval "$cmd" || exit $?
-+ $run eval "$cmd" || {
-+ lt_exit=$?
-+
-+ # Restore the uninstalled library and exit
-+ if test "$mode" = relink; then
-+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
-+ fi
-+
-+ exit $lt_exit
-+ }
- done
- IFS="$save_ifs"
- fi
-@@ -3369,18 +6024,18 @@
- fi
-
- # Deduce the name of the destination old-style object file.
-- case "$destfile" in
-+ case $destfile in
- *.lo)
- staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
- ;;
-- *.o | *.obj)
-+ *.$objext)
- staticdest="$destfile"
- destfile=
- ;;
- *)
- $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
- $echo "$help" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- ;;
- esac
-
-@@ -3398,7 +6053,7 @@
- $show "$install_prog $staticobj $staticdest"
- $run eval "$install_prog \$staticobj \$staticdest" || exit $?
- fi
-- exit 0
-+ exit $EXIT_SUCCESS
- ;;
-
- *)
-@@ -3410,52 +6065,84 @@
- destfile="$destdir/$destfile"
- fi
-
-+ # If the file is missing, and there is a .exe on the end, strip it
-+ # because it is most likely a libtool script we actually want to
-+ # install
-+ stripped_ext=""
-+ case $file in
-+ *.exe)
-+ if test ! -f "$file"; then
-+ file=`$echo $file|${SED} 's,.exe$,,'`
-+ stripped_ext=".exe"
-+ fi
-+ ;;
-+ esac
-+
- # Do a test to see if this is really a libtool program.
-- if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-- link_against_libtool_libs=
-+ case $host in
-+ *cygwin*|*mingw*)
-+ wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
-+ ;;
-+ *)
-+ wrapper=$file
-+ ;;
-+ esac
-+ if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
-+ notinst_deplibs=
- relink_command=
-
-+ # Note that it is not necessary on cygwin/mingw to append a dot to
-+ # foo even if both foo and FILE.exe exist: automatic-append-.exe
-+ # behavior happens only for exec(3), not for open(2)! Also, sourcing
-+ # `FILE.' does not work on cygwin managed mounts.
-+ #
- # If there is no directory component, then add one.
-- case "$file" in
-- */* | *\\*) . $file ;;
-- *) . ./$file ;;
-+ case $wrapper in
-+ */* | *\\*) . ${wrapper} ;;
-+ *) . ./${wrapper} ;;
- esac
-
- # Check the variables that should have been set.
-- if test -z "$link_against_libtool_libs"; then
-- $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
-- exit 1
-+ if test -z "$notinst_deplibs"; then
-+ $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
-+ exit $EXIT_FAILURE
- fi
-
- finalize=yes
-- for lib in $link_against_libtool_libs; do
-+ for lib in $notinst_deplibs; do
- # Check to see that each library is installed.
- libdir=
- if test -f "$lib"; then
- # If there is no directory component, then add one.
-- case "$lib" in
-+ case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
- fi
-- libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`"
-+ libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
- if test -n "$libdir" && test ! -f "$libfile"; then
- $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
- finalize=no
- fi
- done
-
-+ relink_command=
-+ # Note that it is not necessary on cygwin/mingw to append a dot to
-+ # foo even if both foo and FILE.exe exist: automatic-append-.exe
-+ # behavior happens only for exec(3), not for open(2)! Also, sourcing
-+ # `FILE.' does not work on cygwin managed mounts.
-+ #
-+ # If there is no directory component, then add one.
-+ case $wrapper in
-+ */* | *\\*) . ${wrapper} ;;
-+ *) . ./${wrapper} ;;
-+ esac
-+
- outputname=
- if test "$fast_install" = no && test -n "$relink_command"; then
- if test "$finalize" = yes && test -z "$run"; then
-- tmpdir="/tmp"
-- test -n "$TMPDIR" && tmpdir="$TMPDIR"
-- tmpdir="$tmpdir/libtool-$$"
-- if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
-- else
-- $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
-- continue
-- fi
-+ tmpdir=`func_mktempdir`
-+ file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
- outputname="$tmpdir/$file"
- # Replace the output file specification.
- relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-@@ -3473,10 +6160,27 @@
- fi
- else
- # Install the binary that we compiled earlier.
-- file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
-+ file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
- fi
- fi
-
-+ # remove .exe since cygwin /usr/bin/install will append another
-+ # one anyway
-+ case $install_prog,$host in
-+ */usr/bin/install*,*cygwin*)
-+ case $file:$destfile in
-+ *.exe:*.exe)
-+ # this is ok
-+ ;;
-+ *.exe:*)
-+ destfile=$destfile.exe
-+ ;;
-+ *:*.exe)
-+ destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
-+ ;;
-+ esac
-+ ;;
-+ esac
- $show "$install_prog$stripme $file $destfile"
- $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
- test -n "$outputname" && ${rm}r "$tmpdir"
-@@ -3493,11 +6197,17 @@
- $show "$install_prog $file $oldlib"
- $run eval "$install_prog \$file \$oldlib" || exit $?
-
-+ if test -n "$stripme" && test -n "$old_striplib"; then
-+ $show "$old_striplib $oldlib"
-+ $run eval "$old_striplib $oldlib" || exit $?
-+ fi
-+
- # Do each command in the postinstall commands.
-- eval cmds=\"$old_postinstall_cmds\"
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-+ cmds=$old_postinstall_cmds
-+ save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
-+ eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
-@@ -3511,11 +6221,10 @@
- if test -n "$current_libdirs"; then
- # Maybe just do a dry run.
- test -n "$run" && current_libdirs=" -n$current_libdirs"
-- exec $SHELL $0 --finish$current_libdirs
-- exit 1
-+ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
-+ else
-+ exit $EXIT_SUCCESS
- fi
--
-- exit 0
- ;;
-
- # libtool finish mode
-@@ -3533,10 +6242,11 @@
- for libdir in $libdirs; do
- if test -n "$finish_cmds"; then
- # Do each command in the finish commands.
-- eval cmds=\"$finish_cmds\"
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-+ cmds=$finish_cmds
-+ save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
-+ eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || admincmds="$admincmds
- $cmd"
-@@ -3553,43 +6263,43 @@
- fi
-
- # Exit here if they wanted silent mode.
-- test "$show" = : && exit 0
-+ test "$show" = : && exit $EXIT_SUCCESS
-
-- echo "----------------------------------------------------------------------"
-- echo "Libraries have been installed in:"
-+ $echo "X----------------------------------------------------------------------" | $Xsed
-+ $echo "Libraries have been installed in:"
- for libdir in $libdirs; do
-- echo " $libdir"
-+ $echo " $libdir"
- done
-- echo
-- echo "If you ever happen to want to link against installed libraries"
-- echo "in a given directory, LIBDIR, you must either use libtool, and"
-- echo "specify the full pathname of the library, or use \`-LLIBDIR'"
-- echo "flag during linking and do at least one of the following:"
-+ $echo
-+ $echo "If you ever happen to want to link against installed libraries"
-+ $echo "in a given directory, LIBDIR, you must either use libtool, and"
-+ $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-+ $echo "flag during linking and do at least one of the following:"
- if test -n "$shlibpath_var"; then
-- echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
-- echo " during execution"
-+ $echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
-+ $echo " during execution"
- fi
- if test -n "$runpath_var"; then
-- echo " - add LIBDIR to the \`$runpath_var' environment variable"
-- echo " during linking"
-+ $echo " - add LIBDIR to the \`$runpath_var' environment variable"
-+ $echo " during linking"
- fi
- if test -n "$hardcode_libdir_flag_spec"; then
- libdir=LIBDIR
- eval flag=\"$hardcode_libdir_flag_spec\"
-
-- echo " - use the \`$flag' linker flag"
-+ $echo " - use the \`$flag' linker flag"
- fi
- if test -n "$admincmds"; then
-- echo " - have your system administrator run these commands:$admincmds"
-+ $echo " - have your system administrator run these commands:$admincmds"
- fi
- if test -f /etc/ld.so.conf; then
-- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-+ $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
- fi
-- echo
-- echo "See any operating system documentation about shared libraries for"
-- echo "more information, such as the ld(1) and ld.so(8) manual pages."
-- echo "----------------------------------------------------------------------"
-- exit 0
-+ $echo
-+ $echo "See any operating system documentation about shared libraries for"
-+ $echo "more information, such as the ld(1) and ld.so(8) manual pages."
-+ $echo "X----------------------------------------------------------------------" | $Xsed
-+ exit $EXIT_SUCCESS
- ;;
-
- # libtool execute mode
-@@ -3601,7 +6311,7 @@
- if test -z "$cmd"; then
- $echo "$modename: you must specify a COMMAND" 1>&2
- $echo "$help"
-- exit 1
-+ exit $EXIT_FAILURE
- fi
-
- # Handle -dlopen flags immediately.
-@@ -3609,18 +6319,18 @@
- if test ! -f "$file"; then
- $echo "$modename: \`$file' is not a file" 1>&2
- $echo "$help" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- fi
-
- dir=
-- case "$file" in
-+ case $file in
- *.la)
- # Check to see that this really is a libtool archive.
-- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-+ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- fi
-
- # Read the libtool library.
-@@ -3628,7 +6338,7 @@
- library_names=
-
- # If there is no directory component, then add one.
-- case "$file" in
-+ case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-@@ -3647,7 +6357,7 @@
- dir="$dir/$objdir"
- else
- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- fi
- ;;
-
-@@ -3683,13 +6393,13 @@
- args=
- for file
- do
-- case "$file" in
-+ case $file in
- -*) ;;
- *)
- # Do a test to see if this is really a libtool program.
-- if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-+ if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- # If there is no directory component, then add one.
-- case "$file" in
-+ case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-@@ -3706,11 +6416,11 @@
-
- if test -z "$run"; then
- if test -n "$shlibpath_var"; then
-- # Export the shlibpath_var.
-- eval "export $shlibpath_var"
-+ # Export the shlibpath_var.
-+ eval "export $shlibpath_var"
- fi
-
-- # Restore saved enviroment variables
-+ # Restore saved environment variables
- if test "${save_LC_ALL+set}" = set; then
- LC_ALL="$save_LC_ALL"; export LC_ALL
- fi
-@@ -3718,31 +6428,35 @@
- LANG="$save_LANG"; export LANG
- fi
-
-- # Now actually exec the command.
-- eval "exec \$cmd$args"
--
-- $echo "$modename: cannot exec \$cmd$args"
-- exit 1
-+ # Now prepare to actually exec the command.
-+ exec_cmd="\$cmd$args"
- else
- # Display what would be done.
- if test -n "$shlibpath_var"; then
-- eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
-- $echo "export $shlibpath_var"
-+ eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
-+ $echo "export $shlibpath_var"
- fi
- $echo "$cmd$args"
-- exit 0
-+ exit $EXIT_SUCCESS
- fi
- ;;
-
-- # libtool uninstall mode
-- uninstall)
-- modename="$modename: uninstall"
-+ # libtool clean and uninstall mode
-+ clean | uninstall)
-+ modename="$modename: $mode"
- rm="$nonopt"
- files=
-+ rmforce=
-+ exit_status=0
-+
-+ # This variable tells wrapper scripts just to set variables rather
-+ # than running their programs.
-+ libtool_install_magic="$magic"
-
- for arg
- do
-- case "$arg" in
-+ case $arg in
-+ -f) rm="$rm $arg"; rmforce=yes ;;
- -*) rm="$rm $arg" ;;
- *) files="$files $arg" ;;
- esac
-@@ -3751,91 +6465,192 @@
- if test -z "$rm"; then
- $echo "$modename: you must specify an RM program" 1>&2
- $echo "$help" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- fi
-
-+ rmdirs=
-+
-+ origobjdir="$objdir"
- for file in $files; do
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-- test "X$dir" = "X$file" && dir=.
-+ if test "X$dir" = "X$file"; then
-+ dir=.
-+ objdir="$origobjdir"
-+ else
-+ objdir="$dir/$origobjdir"
-+ fi
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-+ test "$mode" = uninstall && objdir="$dir"
-+
-+ # Remember objdir for removal later, being careful to avoid duplicates
-+ if test "$mode" = clean; then
-+ case " $rmdirs " in
-+ *" $objdir "*) ;;
-+ *) rmdirs="$rmdirs $objdir" ;;
-+ esac
-+ fi
-+
-+ # Don't error if the file doesn't exist and rm -f was used.
-+ if (test -L "$file") >/dev/null 2>&1 \
-+ || (test -h "$file") >/dev/null 2>&1 \
-+ || test -f "$file"; then
-+ :
-+ elif test -d "$file"; then
-+ exit_status=1
-+ continue
-+ elif test "$rmforce" = yes; then
-+ continue
-+ fi
-
- rmfiles="$file"
-
-- case "$name" in
-+ case $name in
- *.la)
- # Possibly a libtool archive, so verify it.
-- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-+ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- . $dir/$name
-
- # Delete the libtool libraries and symlinks.
- for n in $library_names; do
-- rmfiles="$rmfiles $dir/$n"
-+ rmfiles="$rmfiles $objdir/$n"
- done
-- test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library"
-+ test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-
-- $show "$rm $rmfiles"
-- $run $rm $rmfiles
--
-- if test -n "$library_names"; then
-- # Do each command in the postuninstall commands.
-- eval cmds=\"$postuninstall_cmds\"
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-- for cmd in $cmds; do
-+ case "$mode" in
-+ clean)
-+ case " $library_names " in
-+ # " " in the beginning catches empty $dlname
-+ *" $dlname "*) ;;
-+ *) rmfiles="$rmfiles $objdir/$dlname" ;;
-+ esac
-+ test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
-+ ;;
-+ uninstall)
-+ if test -n "$library_names"; then
-+ # Do each command in the postuninstall commands.
-+ cmds=$postuninstall_cmds
-+ save_ifs="$IFS"; IFS='~'
-+ for cmd in $cmds; do
-+ IFS="$save_ifs"
-+ eval cmd=\"$cmd\"
-+ $show "$cmd"
-+ $run eval "$cmd"
-+ if test "$?" -ne 0 && test "$rmforce" != yes; then
-+ exit_status=1
-+ fi
-+ done
- IFS="$save_ifs"
-- $show "$cmd"
-- $run eval "$cmd"
-- done
-- IFS="$save_ifs"
-- fi
-+ fi
-
-- if test -n "$old_library"; then
-- # Do each command in the old_postuninstall commands.
-- eval cmds=\"$old_postuninstall_cmds\"
-- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
-- for cmd in $cmds; do
-+ if test -n "$old_library"; then
-+ # Do each command in the old_postuninstall commands.
-+ cmds=$old_postuninstall_cmds
-+ save_ifs="$IFS"; IFS='~'
-+ for cmd in $cmds; do
-+ IFS="$save_ifs"
-+ eval cmd=\"$cmd\"
-+ $show "$cmd"
-+ $run eval "$cmd"
-+ if test "$?" -ne 0 && test "$rmforce" != yes; then
-+ exit_status=1
-+ fi
-+ done
- IFS="$save_ifs"
-- $show "$cmd"
-- $run eval "$cmd"
-- done
-- IFS="$save_ifs"
-- fi
--
-- # FIXME: should reinstall the best remaining shared library.
-+ fi
-+ # FIXME: should reinstall the best remaining shared library.
-+ ;;
-+ esac
- fi
- ;;
-
- *.lo)
-- if test "$build_old_libs" = yes; then
-- oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
-- rmfiles="$rmfiles $dir/$oldobj"
-+ # Possibly a libtool object, so verify it.
-+ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-+
-+ # Read the .lo file
-+ . $dir/$name
-+
-+ # Add PIC object to the list of files to remove.
-+ if test -n "$pic_object" \
-+ && test "$pic_object" != none; then
-+ rmfiles="$rmfiles $dir/$pic_object"
-+ fi
-+
-+ # Add non-PIC object to the list of files to remove.
-+ if test -n "$non_pic_object" \
-+ && test "$non_pic_object" != none; then
-+ rmfiles="$rmfiles $dir/$non_pic_object"
-+ fi
- fi
-- $show "$rm $rmfiles"
-- $run $rm $rmfiles
- ;;
-
- *)
-- $show "$rm $rmfiles"
-- $run $rm $rmfiles
-+ if test "$mode" = clean ; then
-+ noexename=$name
-+ case $file in
-+ *.exe)
-+ file=`$echo $file|${SED} 's,.exe$,,'`
-+ noexename=`$echo $name|${SED} 's,.exe$,,'`
-+ # $file with .exe has already been added to rmfiles,
-+ # add $file without .exe
-+ rmfiles="$rmfiles $file"
-+ ;;
-+ esac
-+ # Do a test to see if this is a libtool program.
-+ if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-+ relink_command=
-+ . $dir/$noexename
-+
-+ # note $name still contains .exe if it was in $file originally
-+ # as does the version of $file that was added into $rmfiles
-+ rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
-+ if test "$fast_install" = yes && test -n "$relink_command"; then
-+ rmfiles="$rmfiles $objdir/lt-$name"
-+ fi
-+ if test "X$noexename" != "X$name" ; then
-+ rmfiles="$rmfiles $objdir/lt-${noexename}.c"
-+ fi
-+ fi
-+ fi
- ;;
- esac
-+ $show "$rm $rmfiles"
-+ $run $rm $rmfiles || exit_status=1
- done
-- exit 0
-+ objdir="$origobjdir"
-+
-+ # Try to remove the ${objdir}s in the directories where we deleted files
-+ for dir in $rmdirs; do
-+ if test -d "$dir"; then
-+ $show "rmdir $dir"
-+ $run rmdir $dir >/dev/null 2>&1
-+ fi
-+ done
-+
-+ exit $exit_status
- ;;
-
- "")
- $echo "$modename: you must specify a MODE" 1>&2
- $echo "$generic_help" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- ;;
- esac
-
-- $echo "$modename: invalid operation mode \`$mode'" 1>&2
-- $echo "$generic_help" 1>&2
-- exit 1
-+ if test -z "$exec_cmd"; then
-+ $echo "$modename: invalid operation mode \`$mode'" 1>&2
-+ $echo "$generic_help" 1>&2
-+ exit $EXIT_FAILURE
-+ fi
- fi # test -z "$show_help"
-
-+if test -n "$exec_cmd"; then
-+ eval exec $exec_cmd
-+ exit $EXIT_FAILURE
-+fi
-+
- # We need to display help for each of the modes.
--case "$mode" in
-+case $mode in
- "") $echo \
- "Usage: $modename [OPTION]... [MODE-ARG]...
-
-@@ -3850,10 +6665,12 @@
- --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
- --quiet same as \`--silent'
- --silent don't print informational messages
-+ --tag=TAG use configuration variables from tag TAG
- --version print version information
-
- MODE must be one of the following:
-
-+ clean remove files from the build directory
- compile compile a source file into a libtool object
- execute automatically set library path, then run a program
- finish complete the installation of libtool libraries
-@@ -3862,8 +6679,24 @@
- uninstall remove libraries from an installed directory
-
- MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
--a more detailed description of MODE."
-- exit 0
-+a more detailed description of MODE.
-+
-+Report bugs to <bug-libtool@gnu.org>."
-+ exit $EXIT_SUCCESS
-+ ;;
-+
-+clean)
-+ $echo \
-+"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-+
-+Remove files from the build directory.
-+
-+RM is the name of the program to use to delete files associated with each FILE
-+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-+to RM.
-+
-+If FILE is a libtool library, object or program, all the files associated
-+with it are deleted. Otherwise, only FILE itself is deleted using RM."
- ;;
-
- compile)
-@@ -3875,6 +6708,8 @@
- This mode accepts the following additional options:
-
- -o OUTPUT-FILE set the output file name to OUTPUT-FILE
-+ -prefer-pic try to building PIC objects only
-+ -prefer-non-pic try to building non-PIC objects only
- -static always build a \`.o' file suitable for static linking
-
- COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-@@ -3954,8 +6789,13 @@
- -LLIBDIR search LIBDIR for required installed libraries
- -lNAME OUTPUT-FILE requires the installed library libNAME
- -module build a library that can dlopened
-+ -no-fast-install disable the fast-install mode
-+ -no-install link a not-installable executable
- -no-undefined declare that a library does not refer to external symbols
- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
-+ -objectlist FILE Use a list of object files found in FILE to specify objects
-+ -precious-files-regex REGEX
-+ don't remove output files matching REGEX
- -release RELEASE specify package release information
- -rpath LIBDIR the created library will eventually be installed in LIBDIR
- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
-@@ -3997,14 +6837,33 @@
- *)
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$help" 1>&2
-- exit 1
-+ exit $EXIT_FAILURE
- ;;
- esac
-
--echo
-+$echo
- $echo "Try \`$modename --help' for more information about other modes."
-
--exit 0
-+exit $?
-+
-+# The TAGs below are defined such that we never get into a situation
-+# in which we disable both kinds of libraries. Given conflicting
-+# choices, we go for a static library, that is the most portable,
-+# since we can't tell whether shared libraries were disabled because
-+# the user asked for that or because the platform doesn't support
-+# them. This is particularly important on AIX, because we don't
-+# support having both static and shared libraries enabled at the same
-+# time on that platform, so we default to a shared-only configuration.
-+# If a disable-shared tag is given, we'll fallback to a static-only
-+# configuration. But we'll never go from static-only to shared-only.
-+
-+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-+disable_libs=shared
-+# ### END LIBTOOL TAG CONFIG: disable-shared
-+
-+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-+disable_libs=static
-+# ### END LIBTOOL TAG CONFIG: disable-static
-
- # Local Variables:
- # mode:shell-script
--
1.7.0.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [Buildroot] [PATCH 4/5] libglib12: remove deprecated package
2010-09-12 18:33 [Buildroot] [pull request] Pull request for branch for-2010.11/remove-deprecated-packages Thomas Petazzoni
` (2 preceding siblings ...)
2010-09-12 18:33 ` [Buildroot] [PATCH 3/5] libgtk12: Remove " Thomas Petazzoni
@ 2010-09-12 18:33 ` Thomas Petazzoni
2010-09-12 18:33 ` [Buildroot] [PATCH 5/5] microwin: " Thomas Petazzoni
2010-09-12 22:24 ` [Buildroot] [pull request] Pull request for branch for-2010.11/remove-deprecated-packages Peter Korsgaard
5 siblings, 0 replies; 7+ messages in thread
From: Thomas Petazzoni @ 2010-09-12 18:33 UTC (permalink / raw)
To: buildroot
This is part of the removal of the Gtk 1.x stack.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
configs/arm_nptl_toolchain_defconfig | 1 -
configs/arm_toolchain_defconfig | 1 -
configs/at91rm9200df_defconfig | 1 -
configs/at91rm9200df_ext_bare_defconfig | 1 -
configs/at91rm9200df_ext_defconfig | 1 -
configs/at91sam9260dfc_defconfig | 1 -
configs/at91sam9260dfc_ext_bare_defconfig | 1 -
configs/at91sam9260dfc_ext_defconfig | 1 -
configs/at91sam9260pf_defconfig | 1 -
configs/at91sam9261ek_defconfig | 1 -
configs/at91sam9261ek_ext_bare_defconfig | 1 -
configs/at91sam9261ek_ext_defconfig | 1 -
configs/at91sam9263ek_defconfig | 1 -
configs/at91sam9263ek_ext_bare_defconfig | 1 -
configs/at91sam9263ek_ext_defconfig | 1 -
configs/at91sam9g20dfc_defconfig | 1 -
configs/at91sam9g20dfc_ext_bare_defconfig | 1 -
configs/at91sam9g20dfc_ext_defconfig | 1 -
configs/atngw100-base_defconfig | 1 -
configs/atngw100_defconfig | 1 -
configs/atstk1005_defconfig | 1 -
configs/atstk100x_defconfig | 1 -
configs/i386_defconfig | 1 -
configs/i686_defconfig | 1 -
configs/integrator926_defconfig | 1 -
configs/integrator926_huge_defconfig | 1 -
configs/kb9202_defconfig | 1 -
configs/v100sc2_defconfig | 1 -
package/Config.in | 1 -
package/libglib12/Config.in | 7 -
package/libglib12/glib-1.2.10-gcc34-fix.patch | 41 -
package/libglib12/libglib-libtool.patch | 88 --
package/libglib12/libglib12.mk | 97 --
package/libglib12/libglib_configure.patch | 1800 -------------------------
34 files changed, 0 insertions(+), 2062 deletions(-)
delete mode 100644 package/libglib12/Config.in
delete mode 100644 package/libglib12/glib-1.2.10-gcc34-fix.patch
delete mode 100644 package/libglib12/libglib-libtool.patch
delete mode 100644 package/libglib12/libglib12.mk
delete mode 100644 package/libglib12/libglib_configure.patch
diff --git a/configs/arm_nptl_toolchain_defconfig b/configs/arm_nptl_toolchain_defconfig
index 02e6844..d7b26a5 100644
--- a/configs/arm_nptl_toolchain_defconfig
+++ b/configs/arm_nptl_toolchain_defconfig
@@ -568,7 +568,6 @@ BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
# BR2_PACKAGE_LIBDAEMON is not set
# BR2_PACKAGE_LIBELF is not set
# BR2_PACKAGE_LIBEVENT is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_LIBOIL is not set
diff --git a/configs/arm_toolchain_defconfig b/configs/arm_toolchain_defconfig
index bd6f3e2..08f5485 100644
--- a/configs/arm_toolchain_defconfig
+++ b/configs/arm_toolchain_defconfig
@@ -615,7 +615,6 @@ BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
diff --git a/configs/at91rm9200df_defconfig b/configs/at91rm9200df_defconfig
index 8abbef9..f589eeb 100644
--- a/configs/at91rm9200df_defconfig
+++ b/configs/at91rm9200df_defconfig
@@ -721,7 +721,6 @@ BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
BR2_PACKAGE_LIBGLIB2=y
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
diff --git a/configs/at91rm9200df_ext_bare_defconfig b/configs/at91rm9200df_ext_bare_defconfig
index fec2c04..651ac37 100644
--- a/configs/at91rm9200df_ext_bare_defconfig
+++ b/configs/at91rm9200df_ext_bare_defconfig
@@ -539,7 +539,6 @@ BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
diff --git a/configs/at91rm9200df_ext_defconfig b/configs/at91rm9200df_ext_defconfig
index 54755e7..d261fb8 100644
--- a/configs/at91rm9200df_ext_defconfig
+++ b/configs/at91rm9200df_ext_defconfig
@@ -650,7 +650,6 @@ BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
BR2_PACKAGE_LIBGLIB2=y
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
diff --git a/configs/at91sam9260dfc_defconfig b/configs/at91sam9260dfc_defconfig
index c0dbac1..8aeff0f 100644
--- a/configs/at91sam9260dfc_defconfig
+++ b/configs/at91sam9260dfc_defconfig
@@ -735,7 +735,6 @@ BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
BR2_PACKAGE_LIBGLIB2=y
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
diff --git a/configs/at91sam9260dfc_ext_bare_defconfig b/configs/at91sam9260dfc_ext_bare_defconfig
index 540eef6..9527522 100644
--- a/configs/at91sam9260dfc_ext_bare_defconfig
+++ b/configs/at91sam9260dfc_ext_bare_defconfig
@@ -539,7 +539,6 @@ BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
diff --git a/configs/at91sam9260dfc_ext_defconfig b/configs/at91sam9260dfc_ext_defconfig
index 3a6191d..e9ad28b 100644
--- a/configs/at91sam9260dfc_ext_defconfig
+++ b/configs/at91sam9260dfc_ext_defconfig
@@ -658,7 +658,6 @@ BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
BR2_PACKAGE_LIBGLIB2=y
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
diff --git a/configs/at91sam9260pf_defconfig b/configs/at91sam9260pf_defconfig
index 0bc17ae..a2a7fef 100644
--- a/configs/at91sam9260pf_defconfig
+++ b/configs/at91sam9260pf_defconfig
@@ -501,7 +501,6 @@ BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_ATK is not set
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
BR2_PACKAGE_FONTCONFIG=y
BR2_PACKAGE_FREETYPE=y
diff --git a/configs/at91sam9261ek_defconfig b/configs/at91sam9261ek_defconfig
index dd63d5b..5d45cd4 100644
--- a/configs/at91sam9261ek_defconfig
+++ b/configs/at91sam9261ek_defconfig
@@ -737,7 +737,6 @@ BR2_PACKAGE_PANGO=y
# BR2_PACKAGE_LIBDRM is not set
BR2_PACKAGE_LIBERATION=y
# BR2_PACKAGE_LIBGLADE is not set
-BR2_PACKAGE_LIBGLIB12=y
BR2_PACKAGE_LIBGLIB2=y
BR2_PACKAGE_LIBGTK2=y
BR2_PACKAGE_LIBGTK2_ENGINES=y
diff --git a/configs/at91sam9261ek_ext_bare_defconfig b/configs/at91sam9261ek_ext_bare_defconfig
index ab8851f..99b124d 100644
--- a/configs/at91sam9261ek_ext_bare_defconfig
+++ b/configs/at91sam9261ek_ext_bare_defconfig
@@ -542,7 +542,6 @@ BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
diff --git a/configs/at91sam9261ek_ext_defconfig b/configs/at91sam9261ek_ext_defconfig
index 367bcfa..45c8744 100644
--- a/configs/at91sam9261ek_ext_defconfig
+++ b/configs/at91sam9261ek_ext_defconfig
@@ -696,7 +696,6 @@ BR2_PACKAGE_PANGO=y
# BR2_PACKAGE_LIBDRM is not set
BR2_PACKAGE_LIBERATION=y
# BR2_PACKAGE_LIBGLADE is not set
-BR2_PACKAGE_LIBGLIB12=y
BR2_PACKAGE_LIBGLIB2=y
BR2_PACKAGE_LIBGTK2=y
BR2_PACKAGE_LIBGTK2_ENGINES=y
diff --git a/configs/at91sam9263ek_defconfig b/configs/at91sam9263ek_defconfig
index 8fb9b00..e4200e1 100644
--- a/configs/at91sam9263ek_defconfig
+++ b/configs/at91sam9263ek_defconfig
@@ -734,7 +734,6 @@ BR2_PACKAGE_PANGO=y
# BR2_PACKAGE_LIBDRM is not set
BR2_PACKAGE_LIBERATION=y
# BR2_PACKAGE_LIBGLADE is not set
-BR2_PACKAGE_LIBGLIB12=y
BR2_PACKAGE_LIBGLIB2=y
BR2_PACKAGE_LIBGTK2=y
BR2_PACKAGE_LIBGTK2_ENGINES=y
diff --git a/configs/at91sam9263ek_ext_bare_defconfig b/configs/at91sam9263ek_ext_bare_defconfig
index 2578b95..b9712b5 100644
--- a/configs/at91sam9263ek_ext_bare_defconfig
+++ b/configs/at91sam9263ek_ext_bare_defconfig
@@ -541,7 +541,6 @@ BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
diff --git a/configs/at91sam9263ek_ext_defconfig b/configs/at91sam9263ek_ext_defconfig
index 3f6e478..5c499e9 100644
--- a/configs/at91sam9263ek_ext_defconfig
+++ b/configs/at91sam9263ek_ext_defconfig
@@ -659,7 +659,6 @@ BR2_PACKAGE_PANGO=y
# BR2_PACKAGE_LIBDRM is not set
BR2_PACKAGE_LIBERATION=y
# BR2_PACKAGE_LIBGLADE is not set
-BR2_PACKAGE_LIBGLIB12=y
BR2_PACKAGE_LIBGLIB2=y
BR2_PACKAGE_LIBGTK2=y
BR2_PACKAGE_LIBGTK2_ENGINES=y
diff --git a/configs/at91sam9g20dfc_defconfig b/configs/at91sam9g20dfc_defconfig
index bdab741..bd46557 100644
--- a/configs/at91sam9g20dfc_defconfig
+++ b/configs/at91sam9g20dfc_defconfig
@@ -669,7 +669,6 @@ BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
diff --git a/configs/at91sam9g20dfc_ext_bare_defconfig b/configs/at91sam9g20dfc_ext_bare_defconfig
index 49a5124..a48822a 100644
--- a/configs/at91sam9g20dfc_ext_bare_defconfig
+++ b/configs/at91sam9g20dfc_ext_bare_defconfig
@@ -539,7 +539,6 @@ BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
diff --git a/configs/at91sam9g20dfc_ext_defconfig b/configs/at91sam9g20dfc_ext_defconfig
index cb21324..f233890 100644
--- a/configs/at91sam9g20dfc_ext_defconfig
+++ b/configs/at91sam9g20dfc_ext_defconfig
@@ -658,7 +658,6 @@ BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
BR2_PACKAGE_LIBGLIB2=y
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
diff --git a/configs/atngw100-base_defconfig b/configs/atngw100-base_defconfig
index 0af8bc2..b498524 100644
--- a/configs/atngw100-base_defconfig
+++ b/configs/atngw100-base_defconfig
@@ -586,7 +586,6 @@ BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
diff --git a/configs/atngw100_defconfig b/configs/atngw100_defconfig
index 01d0d7a..619cae6 100644
--- a/configs/atngw100_defconfig
+++ b/configs/atngw100_defconfig
@@ -544,7 +544,6 @@ BR2_PACKAGE_ZLIB=y
BR2_PACKAGE_LIBDAEMON=y
# BR2_PACKAGE_LIBELF is not set
# BR2_PACKAGE_LIBEVENT is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
BR2_PACKAGE_LIBGLIB2=y
# BR2_PACKAGE_LIBOIL is not set
# BR2_PACKAGE_STARTUP_NOTIFICATION is not set
diff --git a/configs/atstk1005_defconfig b/configs/atstk1005_defconfig
index 2e6d94f..48ea915 100644
--- a/configs/atstk1005_defconfig
+++ b/configs/atstk1005_defconfig
@@ -631,7 +631,6 @@ BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
BR2_PACKAGE_LIBGLIB2=y
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
diff --git a/configs/atstk100x_defconfig b/configs/atstk100x_defconfig
index ca9902f..4be9767 100644
--- a/configs/atstk100x_defconfig
+++ b/configs/atstk100x_defconfig
@@ -730,7 +730,6 @@ BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
BR2_PACKAGE_LIBGLIB2=y
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
diff --git a/configs/i386_defconfig b/configs/i386_defconfig
index 184bc30..7910511 100644
--- a/configs/i386_defconfig
+++ b/configs/i386_defconfig
@@ -574,7 +574,6 @@ BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
diff --git a/configs/i686_defconfig b/configs/i686_defconfig
index e537a8a..e75f105 100644
--- a/configs/i686_defconfig
+++ b/configs/i686_defconfig
@@ -574,7 +574,6 @@ BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
diff --git a/configs/integrator926_defconfig b/configs/integrator926_defconfig
index cd25820..724b025 100644
--- a/configs/integrator926_defconfig
+++ b/configs/integrator926_defconfig
@@ -572,7 +572,6 @@ BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
diff --git a/configs/integrator926_huge_defconfig b/configs/integrator926_huge_defconfig
index cc6e866..2b20b0b 100644
--- a/configs/integrator926_huge_defconfig
+++ b/configs/integrator926_huge_defconfig
@@ -551,7 +551,6 @@ BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
diff --git a/configs/kb9202_defconfig b/configs/kb9202_defconfig
index 842a8a6..ee2db69 100644
--- a/configs/kb9202_defconfig
+++ b/configs/kb9202_defconfig
@@ -557,7 +557,6 @@ BR2_PACKAGE_XSERVER_none=y
#
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_LIBSEXY is not set
diff --git a/configs/v100sc2_defconfig b/configs/v100sc2_defconfig
index c82e7d7..f71a0d3 100644
--- a/configs/v100sc2_defconfig
+++ b/configs/v100sc2_defconfig
@@ -574,7 +574,6 @@ BR2_PACKAGE_QT_OPENSSL=y
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
BR2_PACKAGE_LIBGLIB2=y
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
diff --git a/package/Config.in b/package/Config.in
index 62ff1b6..50f8841 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -315,7 +315,6 @@ source "package/libdaemon/Config.in"
source "package/libelf/Config.in"
source "package/libevent/Config.in"
source "package/libfloat/Config.in"
-source "package/libglib12/Config.in"
source "package/libglib2/Config.in"
source "package/liboil/Config.in"
source "package/startup-notification/Config.in"
diff --git a/package/libglib12/Config.in b/package/libglib12/Config.in
deleted file mode 100644
index f6b7d24..0000000
--- a/package/libglib12/Config.in
+++ /dev/null
@@ -1,7 +0,0 @@
-config BR2_PACKAGE_LIBGLIB12
- bool "libglib12"
- depends on BR2_DEPRECATED
- help
- Low-level core library that forms the basis of GTK+ and GNOME.
-
- http://www.gtk.org/
diff --git a/package/libglib12/glib-1.2.10-gcc34-fix.patch b/package/libglib12/glib-1.2.10-gcc34-fix.patch
deleted file mode 100644
index 1b89648..0000000
--- a/package/libglib12/glib-1.2.10-gcc34-fix.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- glib-1.2.10/gstrfuncs.c.orig 2001-02-27 07:00:22.000000000 +0100
-+++ glib-1.2.10/gstrfuncs.c 2004-03-01 13:19:49.531603760 +0100
-@@ -867,7 +867,7 @@
- /* beware of positional parameters
- */
- case '$':
-- g_warning (G_GNUC_PRETTY_FUNCTION
-+ g_warning ("%s%s", G_GNUC_PRETTY_FUNCTION,
- "(): unable to handle positional parameters (%%n$)");
- len += 1024; /* try adding some safety padding */
- break;
-@@ -1034,7 +1034,7 @@
- /* n . dddddddddddddddddddddddd E +- eeee */
- conv_len += 1 + 1 + MAX (24, spec.precision) + 1 + 1 + 4;
- if (spec.mod_extra_long)
-- g_warning (G_GNUC_PRETTY_FUNCTION
-+ g_warning ("%s%s", G_GNUC_PRETTY_FUNCTION,
- "(): unable to handle long double, collecting double only");
- #ifdef HAVE_LONG_DOUBLE
- #error need to implement special handling for long double
-@@ -1077,7 +1077,7 @@
- conv_done = TRUE;
- if (spec.mod_long)
- {
-- g_warning (G_GNUC_PRETTY_FUNCTION
-+ g_warning ("%s%s", G_GNUC_PRETTY_FUNCTION,
- "(): unable to handle wide char strings");
- len += 1024; /* try adding some safety padding */
- }
-@@ -1108,9 +1108,8 @@
- conv_len += format - spec_start;
- break;
- default:
-- g_warning (G_GNUC_PRETTY_FUNCTION
-- "(): unable to handle `%c' while parsing format",
-- c);
-+ g_warning ("%s(): unable to handle `%c' while parsing format",
-+ G_GNUC_PRETTY_FUNCTION, c);
- break;
- }
- conv_done |= conv_len > 0;
diff --git a/package/libglib12/libglib-libtool.patch b/package/libglib12/libglib-libtool.patch
deleted file mode 100644
index 5a78c69..0000000
--- a/package/libglib12/libglib-libtool.patch
+++ /dev/null
@@ -1,88 +0,0 @@
---- glib/ltconfig
-+++ glib/ltconfig
-@@ -450,6 +450,7 @@
- # Transform linux* to *-*-linux-gnu*, to support old configure scripts.
- case "$host_os" in
- linux-gnu*) ;;
-+linux-uclibc*) ;;
- linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
- esac
-
-@@ -1981,6 +1982,28 @@
- fi
- ;;
-
-+linux-uclibc*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-+ soname_spec='${libname}${release}.so$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ # deplibs_check_method=pass_all
-+ deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
-+ file_magic_cmd=/usr/bin/file
-+ file_magic_test_file=`echo /lib/libuClibc-*.so`
-+ # This implies no fast_install, which is unacceptable.
-+ # Some rework will be needed to allow for fast_install
-+ # before this can be enabled.
-+ # Note: copied from linux-gnu, and may not be appropriate.
-+ hardcode_into_libs=yes
-+ # Assume using the uClibc dynamic linker.
-+ dynamic_linker="uClibc ld.so"
-+ ;;
-+
- netbsd*)
- version_type=sunos
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
---- g/configure
-+++ g/configure
-@@ -966,6 +966,7 @@
- host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
- host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
- echo "$ac_t""$host" 1>&6
-+host_alias=$host
-
- echo $ac_n "checking build system type""... $ac_c" 1>&6
- echo "configure:972: checking build system type" >&5
-diff -urN glib-1.2.10-0rig/ltconfig glib-1.2.10/ltconfig
---- glib-1.2.10-0rig/ltconfig 2009-01-17 02:56:10.000000000 +0100
-+++ glib-1.2.10/ltconfig 2009-01-17 02:55:40.000000000 +0100
-@@ -448,6 +448,9 @@
- fi
-
- # Transform linux* to *-*-linux-gnu*, to support old configure scripts.
-+echo $ac_n "host_os... $host_os" 1>&5
-+echo $ac_n "host_os... $host_os" 1>&6
-+
- case "$host_os" in
- linux-gnu*) ;;
- linux-uclibc*) ;;
-@@ -761,6 +764,7 @@
- ;;
- *)
- can_build_shared=no
-+ echo "$progname:764: No OS found: host_os = $host_os" >&5
- ;;
- esac
- fi
-@@ -1791,6 +1795,8 @@
- # If you have `file' or equivalent on your system and you're not sure
- # whether `pass_all' will *always* work, you probably want this one.
- echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6
-+echo $ac_n "host_os... $host_os" 1>&5
-+echo $ac_n "host_os... $host_os" 1>&6
- case "$host_os" in
- aix3*)
- version_type=linux
-@@ -1982,7 +1988,7 @@
- fi
- ;;
-
--linux-uclibc*)
-+*-linux | linux-uclibc*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
diff --git a/package/libglib12/libglib12.mk b/package/libglib12/libglib12.mk
deleted file mode 100644
index 6d7d101..0000000
--- a/package/libglib12/libglib12.mk
+++ /dev/null
@@ -1,97 +0,0 @@
-#############################################################
-#
-# libglib1.2
-#
-#############################################################
-LIBGLIB12_VERSION:=1.2.10
-LIBGLIB12_SOURCE:=glib-$(LIBGLIB12_VERSION).tar.gz
-LIBGLIB12_SITE:=http://ftp.gtk.org/pub/gtk/v1.2
-LIBGLIB12_CAT:=$(ZCAT)
-LIBGLIB12_DIR:=$(BUILD_DIR)/glib-$(LIBGLIB12_VERSION)
-LIBGLIB12_BINARY:=libglib.a
-
-$(DL_DIR)/$(LIBGLIB12_SOURCE):
- $(call DOWNLOAD,$(LIBGLIB12_SITE),$(LIBGLIB12_SOURCE))
-
-$(LIBGLIB12_DIR)/.unpacked: $(DL_DIR)/$(LIBGLIB12_SOURCE)
- $(LIBGLIB12_CAT) $(DL_DIR)/$(LIBGLIB12_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
- toolchain/patch-kernel.sh $(LIBGLIB12_DIR) package/libglib12/ \*.patch*
- $(CONFIG_UPDATE) $(LIBGLIB12_DIR)
- touch $@
-
-$(LIBGLIB12_DIR)/.configured: $(LIBGLIB12_DIR)/.unpacked
- (cd $(LIBGLIB12_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- $(TARGET_CONFIGURE_ARGS) \
- ./configure $(QUIET) \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libdir=/lib \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --includedir=/usr/include \
- --mandir=/usr/man \
- --infodir=/usr/info \
- --enable-shared \
- $(DISABLE_NLS) \
- )
- touch $@
-
-$(LIBGLIB12_DIR)/.libs/$(LIBGLIB12_BINARY): $(LIBGLIB12_DIR)/.configured
- $(MAKE) CC="$(TARGET_CC)" -C $(LIBGLIB12_DIR)
-
-$(STAGING_DIR)/lib/$(LIBGLIB12_BINARY): $(LIBGLIB12_DIR)/.libs/$(LIBGLIB12_BINARY)
- $(MAKE) prefix=$(STAGING_DIR) \
- exec_prefix=$(STAGING_DIR) \
- bindir=$(STAGING_DIR)/bin \
- sbindir=$(STAGING_DIR)/sbin \
- libexecdir=$(STAGING_DIR)/bin \
- datadir=$(STAGING_DIR)/share \
- sysconfdir=$(STAGING_DIR)/etc \
- sharedstatedir=$(STAGING_DIR)/com \
- localstatedir=$(STAGING_DIR)/var \
- libdir=$(STAGING_DIR)/lib \
- includedir=$(STAGING_DIR)/usr/include \
- oldincludedir=$(STAGING_DIR)/include \
- infodir=$(STAGING_DIR)/info \
- mandir=$(STAGING_DIR)/man \
- -C $(LIBGLIB12_DIR) install
-
-$(TARGET_DIR)/lib/libglib-1.2.so.0.0.10: $(STAGING_DIR)/lib/$(LIBGLIB12_BINARY)
- cp -dpf $(STAGING_DIR)/lib/libglib.so $(TARGET_DIR)/lib/
- cp -dpf $(STAGING_DIR)/lib/libglib-1.2.so.0 $(TARGET_DIR)/lib/
- cp -dpf $(STAGING_DIR)/lib/libglib-1.2.so.0.0.10 $(TARGET_DIR)/lib/
- cp -dpf $(STAGING_DIR)/lib/libgmodule.so $(TARGET_DIR)/lib/
- cp -dpf $(STAGING_DIR)/lib/libgmodule-1.2.so.0 $(TARGET_DIR)/lib/
- cp -dpf $(STAGING_DIR)/lib/libgmodule-1.2.so.0.0.10 $(TARGET_DIR)/lib/
- $(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $(TARGET_DIR)/lib/libglib-1.2.so.0.0.10
- $(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $(TARGET_DIR)/lib/libgmodule-1.2.so.0.0.10
-
-libglib12-source: $(DL_DIR)/$(LIBGLIB12_SOURCE)
-
-libglib12-unpacked: $(LIBGLIB12_DIR)/.unpacked
-
-libglib12: $(TARGET_DIR)/lib/libglib-1.2.so.0.0.10
-
-libglib12-clean:
- rm -f $(TARGET_DIR)/lib/$(LIBGLIB12_BINARY)
- -$(MAKE) -C $(LIBGLIB12_DIR) clean
-
-libglib12-dirclean:
- rm -rf $(LIBGLIB12_DIR)
-
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_PACKAGE_LIBGLIB12),y)
-TARGETS+=libglib12
-endif
diff --git a/package/libglib12/libglib_configure.patch b/package/libglib12/libglib_configure.patch
deleted file mode 100644
index 632669a..0000000
--- a/package/libglib12/libglib_configure.patch
+++ /dev/null
@@ -1,1800 +0,0 @@
-diff -urN glib-1.2.10/acglib.m4 glib-1.2.10-1/acglib.m4
---- glib-1.2.10/acglib.m4 1999-01-04 16:37:40.000000000 -0700
-+++ glib-1.2.10-1/acglib.m4 2002-03-13 21:38:32.000000000 -0700
-@@ -122,6 +122,18 @@
- fi
- echo "#define GLIB_SYSDEF_$glib_sysdef$glib_default" >>$glib_sysdefso
- done
-- AC_MSG_RESULT(failed)])
-+ AC_MSG_RESULT(failed)],
-+[ for glib_sysdef_input in $2 ; do
-+ glib_sysdef=`echo $glib_sysdef_input | sed 's/^\([[^:]]*\):.*$/\1/'`
-+ glib_default=`echo $glib_sysdef_input | sed 's/^[[^:]]*:\(.*\)$/\1/'`
-+ if test $glib_sysdef != $glib_default; then
-+ glib_default=" $4$glib_default"
-+ else
-+ glib_default=
-+ fi
-+ echo "#define GLIB_SYSDEF_$glib_sysdef$glib_default" >>$glib_sysdefso
-+ done
-+ AC_MSG_WARN(cannot check it if cross compiling -- using defaults)]
-+)
- rm -f confrun.c
- ])
-diff -urN glib-1.2.10/configure glib-1.2.10-1/configure
---- glib-1.2.10/configure 2001-03-15 08:44:01.000000000 -0700
-+++ glib-1.2.10-1/configure 2002-03-13 21:38:32.000000000 -0700
-@@ -2099,15 +2099,16 @@
- glib_save_LIBS=$LIBS
- LIBS="$LIBS -lm"
- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-+ echo "configure: warning: cannot check it if cross compiling -- defaulting to none needed" 1>&2
-+
- else
- cat > conftest.$ac_ext <<EOF
--#line 2106 "configure"
-+#line 2107 "configure"
- #include "confdefs.h"
- #include <math.h>
- int main (void) { return (log(1) != log(1.)); }
- EOF
--if { (eval echo configure:2111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-+if { (eval echo configure:2112: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
- then
- echo "$ac_t""none needed" 1>&6
- else
-@@ -2117,15 +2118,16 @@
- glib_save_CFLAGS=$CFLAGS
- CFLAGS="$CFLAGS -std1"
- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-+ echo "configure: warning: suppress autoconf warning message" 1>&2
-+
- else
- cat > conftest.$ac_ext <<EOF
--#line 2124 "configure"
-+#line 2126 "configure"
- #include "confdefs.h"
- #include <math.h>
- int main (void) { return (log(1) != log(1.)); }
- EOF
--if { (eval echo configure:2129: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-+if { (eval echo configure:2131: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
- then
- echo "$ac_t""-std1" 1>&6
- else
-@@ -2135,12 +2137,10 @@
- echo "$ac_t""" 1>&6
- CFLAGS=$glib_save_CFLAGS
- echo "configure: warning: No ANSI prototypes found in library. (-std1 didn't work.)" 1>&2
--
- fi
- rm -fr conftest*
- fi
-
--
- fi
- rm -fr conftest*
- fi
-@@ -2544,7 +2544,7 @@
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-+ ac_cv_sizeof_char=1
- else
- cat > conftest.$ac_ext <<EOF
- #line 2551 "configure"
-@@ -2583,7 +2583,7 @@
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-+ ac_cv_sizeof_short=2
- else
- cat > conftest.$ac_ext <<EOF
- #line 2590 "configure"
-@@ -2622,7 +2622,7 @@
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-+ ac_cv_sizeof_long=4
- else
- cat > conftest.$ac_ext <<EOF
- #line 2629 "configure"
-@@ -2661,7 +2661,7 @@
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-+ ac_cv_sizeof_int=4
- else
- cat > conftest.$ac_ext <<EOF
- #line 2668 "configure"
-@@ -2700,7 +2700,7 @@
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-+ ac_cv_sizeof_void_p=4
- else
- cat > conftest.$ac_ext <<EOF
- #line 2707 "configure"
-@@ -2739,7 +2739,7 @@
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-+ ac_cv_sizeof_long_long=8
- else
- cat > conftest.$ac_ext <<EOF
- #line 2746 "configure"
-@@ -2785,7 +2785,7 @@
- int main() {
-
- /* Ultrix mips cc rejects this. */
--typedef int charset[2]; const charset x;
-+typedef int charset[2]; const charset x = {0,0};
- /* SunOS 4.1.1 cc rejects this. */
- char const *const *ccp;
- char **p;
-@@ -2855,31 +2855,29 @@
- echo $ac_n "(cached) $ac_c" 1>&6
- else
-
-- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
--else
-- cat > conftest.$ac_ext <<EOF
--#line 2863 "configure"
-+ cat > conftest.$ac_ext <<EOF
-+#line 2860 "configure"
- #include "confdefs.h"
-
-+int main() {
-+
- __inline int foo () { return 0; }
- int main () { return foo (); }
-
-+; return 0; }
- EOF
--if { (eval echo configure:2870: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
--then
-+if { (eval echo configure:2870: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-+ rm -rf conftest*
- glib_cv_has__inline=yes
-
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-- rm -fr conftest*
-+ rm -rf conftest*
- glib_cv_has__inline=no
--
--fi
--rm -fr conftest*
-+
- fi
--
-+rm -f conftest*
-
- fi
-
-@@ -2891,36 +2889,34 @@
-
- esac
- echo $ac_n "checking for __inline__""... $ac_c" 1>&6
--echo "configure:2895: checking for __inline__" >&5
-+echo "configure:2893: checking for __inline__" >&5
- if eval "test \"`echo '$''{'glib_cv_has__inline__'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
-
-- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
--else
-- cat > conftest.$ac_ext <<EOF
--#line 2904 "configure"
-+ cat > conftest.$ac_ext <<EOF
-+#line 2899 "configure"
- #include "confdefs.h"
-
-+int main() {
-+
- __inline__ int foo () { return 0; }
- int main () { return foo (); }
-
-+; return 0; }
- EOF
--if { (eval echo configure:2911: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
--then
-+if { (eval echo configure:2909: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-+ rm -rf conftest*
- glib_cv_has__inline__=yes
-
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-- rm -fr conftest*
-+ rm -rf conftest*
- glib_cv_has__inline__=no
-
- fi
--rm -fr conftest*
--fi
--
-+rm -f conftest*
-
- fi
-
-@@ -2932,36 +2928,34 @@
-
- esac
- echo $ac_n "checking for inline""... $ac_c" 1>&6
--echo "configure:2936: checking for inline" >&5
-+echo "configure:2932: checking for inline" >&5
- if eval "test \"`echo '$''{'glib_cv_hasinline'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
-
-- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
--else
-- cat > conftest.$ac_ext <<EOF
--#line 2945 "configure"
-+ cat > conftest.$ac_ext <<EOF
-+#line 2938 "configure"
- #include "confdefs.h"
-
-+int main() {
-+
- inline int foo () { return 0; }
- int main () { return foo (); }
-
-+; return 0; }
- EOF
--if { (eval echo configure:2952: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
--then
-+if { (eval echo configure:2948: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-+ rm -rf conftest*
- glib_cv_hasinline=yes
-
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-- rm -fr conftest*
-+ rm -rf conftest*
- glib_cv_hasinline=no
-
- fi
--rm -fr conftest*
--fi
--
-+rm -f conftest*
-
- fi
-
-@@ -2973,112 +2967,22 @@
-
- esac
-
--echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
--echo "configure:2978: checking whether byte ordering is bigendian" >&5
--if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- ac_cv_c_bigendian=unknown
--# See if sys/param.h defines the BYTE_ORDER macro.
--cat > conftest.$ac_ext <<EOF
--#line 2985 "configure"
--#include "confdefs.h"
--#include <sys/types.h>
--#include <sys/param.h>
--int main() {
--
--#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
-- bogus endian macros
--#endif
--; return 0; }
--EOF
--if { (eval echo configure:2996: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-- # It does; now see whether it defined to BIG_ENDIAN or not.
--cat > conftest.$ac_ext <<EOF
--#line 3000 "configure"
--#include "confdefs.h"
--#include <sys/types.h>
--#include <sys/param.h>
--int main() {
--
--#if BYTE_ORDER != BIG_ENDIAN
-- not big endian
--#endif
--; return 0; }
--EOF
--if { (eval echo configure:3011: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-- ac_cv_c_bigendian=yes
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_cv_c_bigendian=no
--fi
--rm -f conftest*
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
--fi
--rm -f conftest*
--if test $ac_cv_c_bigendian = unknown; then
--if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
--else
-- cat > conftest.$ac_ext <<EOF
--#line 3031 "configure"
--#include "confdefs.h"
--main () {
-- /* Are we little or big endian? From Harbison&Steele. */
-- union
-- {
-- long l;
-- char c[sizeof (long)];
-- } u;
-- u.l = 1;
-- exit (u.c[sizeof (long) - 1] == 1);
--}
--EOF
--if { (eval echo configure:3044: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
--then
-- ac_cv_c_bigendian=no
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -fr conftest*
-- ac_cv_c_bigendian=yes
--fi
--rm -fr conftest*
--fi
--
--fi
--fi
--
--echo "$ac_t""$ac_cv_c_bigendian" 1>&6
--if test $ac_cv_c_bigendian = yes; then
-- cat >> confdefs.h <<\EOF
--#define WORDS_BIGENDIAN 1
--EOF
--
--fi
--
-
- for ac_hdr in float.h
- do
- ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
- echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
--echo "configure:3072: checking for $ac_hdr" >&5
-+echo "configure:2976: checking for $ac_hdr" >&5
- if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
--#line 3077 "configure"
-+#line 2981 "configure"
- #include "confdefs.h"
- #include <$ac_hdr>
- EOF
- ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:3082: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-+{ (eval echo configure:2986: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
- ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
- if test -z "$ac_err"; then
- rm -rf conftest*
-@@ -3111,17 +3015,17 @@
- do
- ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
- echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
--echo "configure:3115: checking for $ac_hdr" >&5
-+echo "configure:3019: checking for $ac_hdr" >&5
- if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
--#line 3120 "configure"
-+#line 3024 "configure"
- #include "confdefs.h"
- #include <$ac_hdr>
- EOF
- ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:3125: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-+{ (eval echo configure:3029: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
- ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
- if test -z "$ac_err"; then
- rm -rf conftest*
-@@ -3154,17 +3058,17 @@
- do
- ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
- echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
--echo "configure:3158: checking for $ac_hdr" >&5
-+echo "configure:3062: checking for $ac_hdr" >&5
- if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
--#line 3163 "configure"
-+#line 3067 "configure"
- #include "confdefs.h"
- #include <$ac_hdr>
- EOF
- ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:3168: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-+{ (eval echo configure:3072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
- ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
- if test -z "$ac_err"; then
- rm -rf conftest*
-@@ -3197,17 +3101,17 @@
- do
- ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
- echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
--echo "configure:3201: checking for $ac_hdr" >&5
-+echo "configure:3105: checking for $ac_hdr" >&5
- if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
--#line 3206 "configure"
-+#line 3110 "configure"
- #include "confdefs.h"
- #include <$ac_hdr>
- EOF
- ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:3211: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-+{ (eval echo configure:3115: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
- ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
- if test -z "$ac_err"; then
- rm -rf conftest*
-@@ -3240,17 +3144,17 @@
- do
- ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
- echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
--echo "configure:3244: checking for $ac_hdr" >&5
-+echo "configure:3148: checking for $ac_hdr" >&5
- if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
--#line 3249 "configure"
-+#line 3153 "configure"
- #include "confdefs.h"
- #include <$ac_hdr>
- EOF
- ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:3254: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-+{ (eval echo configure:3158: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
- ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
- if test -z "$ac_err"; then
- rm -rf conftest*
-@@ -3283,17 +3187,17 @@
- do
- ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
- echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
--echo "configure:3287: checking for $ac_hdr" >&5
-+echo "configure:3191: checking for $ac_hdr" >&5
- if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
--#line 3292 "configure"
-+#line 3196 "configure"
- #include "confdefs.h"
- #include <$ac_hdr>
- EOF
- ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:3297: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-+{ (eval echo configure:3201: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
- ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
- if test -z "$ac_err"; then
- rm -rf conftest*
-@@ -3326,17 +3230,17 @@
- do
- ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
- echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
--echo "configure:3330: checking for $ac_hdr" >&5
-+echo "configure:3234: checking for $ac_hdr" >&5
- if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
--#line 3335 "configure"
-+#line 3239 "configure"
- #include "confdefs.h"
- #include <$ac_hdr>
- EOF
- ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:3340: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-+{ (eval echo configure:3244: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
- ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
- if test -z "$ac_err"; then
- rm -rf conftest*
-@@ -3369,17 +3273,17 @@
- do
- ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
- echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
--echo "configure:3373: checking for $ac_hdr" >&5
-+echo "configure:3277: checking for $ac_hdr" >&5
- if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
--#line 3378 "configure"
-+#line 3282 "configure"
- #include "confdefs.h"
- #include <$ac_hdr>
- EOF
- ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:3383: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-+{ (eval echo configure:3287: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
- ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
- if test -z "$ac_err"; then
- rm -rf conftest*
-@@ -3412,17 +3316,17 @@
- do
- ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
- echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
--echo "configure:3416: checking for $ac_hdr" >&5
-+echo "configure:3320: checking for $ac_hdr" >&5
- if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
--#line 3421 "configure"
-+#line 3325 "configure"
- #include "confdefs.h"
- #include <$ac_hdr>
- EOF
- ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:3426: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-+{ (eval echo configure:3330: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
- ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
- if test -z "$ac_err"; then
- rm -rf conftest*
-@@ -3455,17 +3359,17 @@
- do
- ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
- echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
--echo "configure:3459: checking for $ac_hdr" >&5
-+echo "configure:3363: checking for $ac_hdr" >&5
- if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
--#line 3464 "configure"
-+#line 3368 "configure"
- #include "confdefs.h"
- #include <$ac_hdr>
- EOF
- ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:3469: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-+{ (eval echo configure:3373: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
- ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
- if test -z "$ac_err"; then
- rm -rf conftest*
-@@ -3499,12 +3403,12 @@
- for ac_func in lstat strerror strsignal memmove vsnprintf strcasecmp strncasecmp poll
- do
- echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
--echo "configure:3503: checking for $ac_func" >&5
-+echo "configure:3407: checking for $ac_func" >&5
- if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
--#line 3508 "configure"
-+#line 3412 "configure"
- #include "confdefs.h"
- /* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-@@ -3527,7 +3431,7 @@
-
- ; return 0; }
- EOF
--if { (eval echo configure:3531: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:3435: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
- else
-@@ -3554,9 +3458,9 @@
-
- # Check for sys_errlist
- echo $ac_n "checking for sys_errlist""... $ac_c" 1>&6
--echo "configure:3558: checking for sys_errlist" >&5
-+echo "configure:3462: checking for sys_errlist" >&5
- cat > conftest.$ac_ext <<EOF
--#line 3560 "configure"
-+#line 3464 "configure"
- #include "confdefs.h"
-
- int main() {
-@@ -3567,7 +3471,7 @@
-
- ; return 0; }
- EOF
--if { (eval echo configure:3571: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:3475: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- glib_ok=yes
- else
-@@ -3587,9 +3491,9 @@
-
- # Check for sys_siglist
- echo $ac_n "checking for sys_siglist""... $ac_c" 1>&6
--echo "configure:3591: checking for sys_siglist" >&5
-+echo "configure:3495: checking for sys_siglist" >&5
- cat > conftest.$ac_ext <<EOF
--#line 3593 "configure"
-+#line 3497 "configure"
- #include "confdefs.h"
-
- int main() {
-@@ -3599,7 +3503,7 @@
-
- ; return 0; }
- EOF
--if { (eval echo configure:3603: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:3507: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- glib_ok=yes
- else
-@@ -3619,9 +3523,9 @@
-
- # Check for sys_siglist decl (see Tue Jan 19 00:44:24 1999 in changelog)
- echo $ac_n "checking for sys_siglist declaration""... $ac_c" 1>&6
--echo "configure:3623: checking for sys_siglist declaration" >&5
-+echo "configure:3527: checking for sys_siglist declaration" >&5
- cat > conftest.$ac_ext <<EOF
--#line 3625 "configure"
-+#line 3529 "configure"
- #include "confdefs.h"
- #include <signal.h>
- int main() {
-@@ -3630,7 +3534,7 @@
-
- ; return 0; }
- EOF
--if { (eval echo configure:3634: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-+if { (eval echo configure:3538: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- glib_ok=yes
- else
-@@ -3650,16 +3554,16 @@
-
- # Check if <sys/select.h> needs to be included for fd_set
- echo $ac_n "checking for fd_set""... $ac_c" 1>&6
--echo "configure:3654: checking for fd_set" >&5
-+echo "configure:3558: checking for fd_set" >&5
- cat > conftest.$ac_ext <<EOF
--#line 3656 "configure"
-+#line 3560 "configure"
- #include "confdefs.h"
- #include <sys/types.h>
- int main() {
- fd_set readMask, writeMask;
- ; return 0; }
- EOF
--if { (eval echo configure:3663: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-+if { (eval echo configure:3567: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- gtk_ok=yes
- else
-@@ -3673,7 +3577,7 @@
- echo "$ac_t""yes, found in sys/types.h" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
--#line 3677 "configure"
-+#line 3581 "configure"
- #include "confdefs.h"
- #include <sys/select.h>
- EOF
-@@ -3707,14 +3611,14 @@
- # Check for wchar.h
-
- echo $ac_n "checking for wchar.h""... $ac_c" 1>&6
--echo "configure:3711: checking for wchar.h" >&5
-+echo "configure:3615: checking for wchar.h" >&5
- cat > conftest.$ac_ext <<EOF
--#line 3713 "configure"
-+#line 3617 "configure"
- #include "confdefs.h"
- #include <wchar.h>
- EOF
- ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:3718: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-+{ (eval echo configure:3622: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
- ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
- if test -z "$ac_err"; then
- rm -rf conftest*
-@@ -3738,14 +3642,14 @@
- # Check for wctype.h (for iswalnum)
-
- echo $ac_n "checking for wctype.h""... $ac_c" 1>&6
--echo "configure:3742: checking for wctype.h" >&5
-+echo "configure:3646: checking for wctype.h" >&5
- cat > conftest.$ac_ext <<EOF
--#line 3744 "configure"
-+#line 3648 "configure"
- #include "confdefs.h"
- #include <wctype.h>
- EOF
- ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:3749: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-+{ (eval echo configure:3653: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
- ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
- if test -z "$ac_err"; then
- rm -rf conftest*
-@@ -3769,12 +3673,12 @@
- oLIBS="$LIBS"
- # in Solaris 2.5, `iswalnum' is in -lw
- echo $ac_n "checking for iswalnum""... $ac_c" 1>&6
--echo "configure:3773: checking for iswalnum" >&5
-+echo "configure:3677: checking for iswalnum" >&5
- if eval "test \"`echo '$''{'ac_cv_func_iswalnum'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
--#line 3778 "configure"
-+#line 3682 "configure"
- #include "confdefs.h"
- /* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char iswalnum(); below. */
-@@ -3797,7 +3701,7 @@
-
- ; return 0; }
- EOF
--if { (eval echo configure:3801: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:3705: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_iswalnum=yes"
- else
-@@ -3815,7 +3719,7 @@
- else
- echo "$ac_t""no" 1>&6
- echo $ac_n "checking for iswalnum in -lw""... $ac_c" 1>&6
--echo "configure:3819: checking for iswalnum in -lw" >&5
-+echo "configure:3723: checking for iswalnum in -lw" >&5
- ac_lib_var=`echo w'_'iswalnum | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-@@ -3823,7 +3727,7 @@
- ac_save_LIBS="$LIBS"
- LIBS="-lw $LIBS"
- cat > conftest.$ac_ext <<EOF
--#line 3827 "configure"
-+#line 3731 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- /* We use char because int might match the return type of a gcc2
-@@ -3834,7 +3738,7 @@
- iswalnum()
- ; return 0; }
- EOF
--if { (eval echo configure:3838: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:3742: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
-@@ -3866,9 +3770,9 @@
-
- # The following is necessary for Linux libc-5.4.38
- echo $ac_n "checking if iswalnum() and friends are properly defined""... $ac_c" 1>&6
--echo "configure:3870: checking if iswalnum() and friends are properly defined" >&5
-+echo "configure:3774: checking if iswalnum() and friends are properly defined" >&5
- cat > conftest.$ac_ext <<EOF
--#line 3872 "configure"
-+#line 3776 "configure"
- #include "confdefs.h"
- #include <stdlib.h>
- int main() {
-@@ -3888,7 +3792,7 @@
-
- ; return 0; }
- EOF
--if { (eval echo configure:3892: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:3796: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- glib_working_wctype=yes
- else
-@@ -3909,16 +3813,22 @@
- echo "$ac_t""$glib_working_wctype" 1>&6
-
- echo $ac_n "checking whether realloc (NULL,) will work""... $ac_c" 1>&6
--echo "configure:3913: checking whether realloc (NULL,) will work" >&5
-+echo "configure:3817: checking whether realloc (NULL,) will work" >&5
- if eval "test \"`echo '$''{'glib_cv_sane_realloc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
-
- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-+ echo "configure: warning: cannot check it if cross compiling -- defaulting to yes" 1>&2
-+ glib_cv_sane_realloc=yes
-+ cat >> confdefs.h <<\EOF
-+#define REALLOC_0_WORKS 1
-+EOF
-+
-+
- else
- cat > conftest.$ac_ext <<EOF
--#line 3922 "configure"
-+#line 3832 "configure"
- #include "confdefs.h"
-
- #include <stdlib.h>
-@@ -3926,7 +3836,7 @@
- return realloc (0, sizeof (int)) == 0;
- }
- EOF
--if { (eval echo configure:3930: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-+if { (eval echo configure:3840: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
- then
- glib_cv_sane_realloc=yes
- cat >> confdefs.h <<\EOF
-@@ -3951,16 +3861,18 @@
-
-
- echo $ac_n "checking for an implementation of va_copy()""... $ac_c" 1>&6
--echo "configure:3955: checking for an implementation of va_copy()" >&5
-+echo "configure:3865: checking for an implementation of va_copy()" >&5
- if eval "test \"`echo '$''{'glib_cv_va_copy'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
-
- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-+ echo "configure: warning: cannot check it if cross compiling -- defaulting to no" 1>&2
-+ glib_cv_va_copy=no
-+
- else
- cat > conftest.$ac_ext <<EOF
--#line 3964 "configure"
-+#line 3876 "configure"
- #include "confdefs.h"
-
- #include <stdarg.h>
-@@ -3977,7 +3889,7 @@
- return 0;
- }
- EOF
--if { (eval echo configure:3981: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-+if { (eval echo configure:3893: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
- then
- glib_cv_va_copy=yes
-
-@@ -3996,16 +3908,18 @@
-
- echo "$ac_t""$glib_cv_va_copy" 1>&6
- echo $ac_n "checking for an implementation of __va_copy()""... $ac_c" 1>&6
--echo "configure:4000: checking for an implementation of __va_copy()" >&5
-+echo "configure:3912: checking for an implementation of __va_copy()" >&5
- if eval "test \"`echo '$''{'glib_cv___va_copy'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
-
- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-+ echo "configure: warning: cannot check it if cross compiling -- defaulting to yes" 1>&2
-+ glib_cv___va_copy=yes
-+
- else
- cat > conftest.$ac_ext <<EOF
--#line 4009 "configure"
-+#line 3923 "configure"
- #include "confdefs.h"
-
- #include <stdarg.h>
-@@ -4022,7 +3936,7 @@
- return 0;
- }
- EOF
--if { (eval echo configure:4026: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-+if { (eval echo configure:3940: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
- then
- glib_cv___va_copy=yes
-
-@@ -4041,16 +3955,18 @@
-
- echo "$ac_t""$glib_cv___va_copy" 1>&6
- echo $ac_n "checking whether va_lists can be copied by value""... $ac_c" 1>&6
--echo "configure:4045: checking whether va_lists can be copied by value" >&5
-+echo "configure:3959: checking whether va_lists can be copied by value" >&5
- if eval "test \"`echo '$''{'glib_cv_va_val_copy'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
-
- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-+ echo "configure: warning: cannot check it if cross compiling -- defaulting to yes" 1>&2
-+ glib_cv_va_val_copy=yes
-+
- else
- cat > conftest.$ac_ext <<EOF
--#line 4054 "configure"
-+#line 3970 "configure"
- #include "confdefs.h"
-
- #include <stdarg.h>
-@@ -4067,7 +3983,7 @@
- return 0;
- }
- EOF
--if { (eval echo configure:4071: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-+if { (eval echo configure:3987: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
- then
- glib_cv_va_val_copy=yes
-
-@@ -4112,12 +4028,12 @@
- G_MODULE_HAVE_DLERROR=0
- if test -z "$G_MODULE_IMPL"; then
- echo $ac_n "checking for dlopen""... $ac_c" 1>&6
--echo "configure:4116: checking for dlopen" >&5
-+echo "configure:4032: checking for dlopen" >&5
- if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
--#line 4121 "configure"
-+#line 4037 "configure"
- #include "confdefs.h"
- /* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char dlopen(); below. */
-@@ -4140,7 +4056,7 @@
-
- ; return 0; }
- EOF
--if { (eval echo configure:4144: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:4060: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_dlopen=yes"
- else
-@@ -4155,12 +4071,12 @@
- if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- echo $ac_n "checking for dlsym""... $ac_c" 1>&6
--echo "configure:4159: checking for dlsym" >&5
-+echo "configure:4075: checking for dlsym" >&5
- if eval "test \"`echo '$''{'ac_cv_func_dlsym'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
--#line 4164 "configure"
-+#line 4080 "configure"
- #include "confdefs.h"
- /* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char dlsym(); below. */
-@@ -4183,7 +4099,7 @@
-
- ; return 0; }
- EOF
--if { (eval echo configure:4187: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:4103: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_dlsym=yes"
- else
-@@ -4211,7 +4127,7 @@
- fi
- if test -z "$G_MODULE_IMPL"; then
- echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
--echo "configure:4215: checking for dlopen in -ldl" >&5
-+echo "configure:4131: checking for dlopen in -ldl" >&5
- ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-@@ -4219,7 +4135,7 @@
- ac_save_LIBS="$LIBS"
- LIBS="-ldl $LIBS"
- cat > conftest.$ac_ext <<EOF
--#line 4223 "configure"
-+#line 4139 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- /* We use char because int might match the return type of a gcc2
-@@ -4230,7 +4146,7 @@
- dlopen()
- ; return 0; }
- EOF
--if { (eval echo configure:4234: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:4150: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
-@@ -4246,7 +4162,7 @@
- if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- echo $ac_n "checking for dlsym in -ldl""... $ac_c" 1>&6
--echo "configure:4250: checking for dlsym in -ldl" >&5
-+echo "configure:4166: checking for dlsym in -ldl" >&5
- ac_lib_var=`echo dl'_'dlsym | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-@@ -4254,7 +4170,7 @@
- ac_save_LIBS="$LIBS"
- LIBS="-ldl $LIBS"
- cat > conftest.$ac_ext <<EOF
--#line 4258 "configure"
-+#line 4174 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- /* We use char because int might match the return type of a gcc2
-@@ -4265,7 +4181,7 @@
- dlsym()
- ; return 0; }
- EOF
--if { (eval echo configure:4269: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:4185: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
-@@ -4295,18 +4211,18 @@
- fi
- if test -z "$G_MODULE_IMPL"; then
- echo $ac_n "checking how to export all symbols""... $ac_c" 1>&6
--echo "configure:4299: checking how to export all symbols" >&5
-+echo "configure:4215: checking how to export all symbols" >&5
- SAVED_LDFLAGS=$LDFLAGS
- LDFLAGS="$LDFLAGS -Wl,-E"
- cat > conftest.$ac_ext <<EOF
--#line 4303 "configure"
-+#line 4219 "configure"
- #include "confdefs.h"
-
- int main() {
- return 0;
- ; return 0; }
- EOF
--if { (eval echo configure:4310: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:4226: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- G_MODULE_LDFLAGS="-Wl,-E"
- else
-@@ -4316,14 +4232,14 @@
-
- LDFLAGS="$SAVED_LDFLAGS -bexpall"
- cat > conftest.$ac_ext <<EOF
--#line 4320 "configure"
-+#line 4236 "configure"
- #include "confdefs.h"
-
- int main() {
- return 0;
- ; return 0; }
- EOF
--if { (eval echo configure:4327: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:4243: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- G_MODULE_LDFLAGS="-bexpall"
- else
-@@ -4343,7 +4259,7 @@
- G_MODULE_LDFLAGS=
- fi
- echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
--echo "configure:4347: checking for shl_load in -ldld" >&5
-+echo "configure:4263: checking for shl_load in -ldld" >&5
- ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-@@ -4351,7 +4267,7 @@
- ac_save_LIBS="$LIBS"
- LIBS="-ldld $LIBS"
- cat > conftest.$ac_ext <<EOF
--#line 4355 "configure"
-+#line 4271 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- /* We use char because int might match the return type of a gcc2
-@@ -4362,7 +4278,7 @@
- shl_load()
- ; return 0; }
- EOF
--if { (eval echo configure:4366: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:4282: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
-@@ -4396,16 +4312,17 @@
- LIBS="$LIBS $G_MODULE_LIBS"
- LDFLAGS="$LDFLAGS $G_MODULE_LDFLAGS"
- echo $ac_n "checking for RTLD_GLOBAL brokenness""... $ac_c" 1>&6
--echo "configure:4400: checking for RTLD_GLOBAL brokenness" >&5
-+echo "configure:4316: checking for RTLD_GLOBAL brokenness" >&5
- if eval "test \"`echo '$''{'glib_cv_rtldglobal_broken'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
-
- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-+ echo "configure: warning: cannot check it if cross compiling -- defaulting to no" 1>&2
-+ glib_cv_rtldglobal_broken=no
- else
- cat > conftest.$ac_ext <<EOF
--#line 4409 "configure"
-+#line 4326 "configure"
- #include "confdefs.h"
-
- #include <dlfcn.h>
-@@ -4425,7 +4342,7 @@
- return global == local;
- }
- EOF
--if { (eval echo configure:4429: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-+if { (eval echo configure:4346: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
- then
- glib_cv_rtldglobal_broken=no
- else
-@@ -4448,16 +4365,18 @@
- G_MODULE_BROKEN_RTLD_GLOBAL=0
- fi
- echo $ac_n "checking for preceeding underscore in symbols""... $ac_c" 1>&6
--echo "configure:4452: checking for preceeding underscore in symbols" >&5
-+echo "configure:4369: checking for preceeding underscore in symbols" >&5
- if eval "test \"`echo '$''{'glib_cv_uscore'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
-
- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-+ echo "configure: warning: cannot check it if cross compiling -- defaulting to no" 1>&2
-+ glib_cv_uscore=no
-+
- else
- cat > conftest.$ac_ext <<EOF
--#line 4461 "configure"
-+#line 4380 "configure"
- #include "confdefs.h"
-
- #include <dlfcn.h>
-@@ -4471,7 +4390,7 @@
- } return (!f2 || f1);
- }
- EOF
--if { (eval echo configure:4475: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-+if { (eval echo configure:4394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
- then
- glib_cv_uscore=yes
- else
-@@ -4496,12 +4415,12 @@
-
- LDFLAGS="$LDFLAGS_orig"
- echo $ac_n "checking for dlerror""... $ac_c" 1>&6
--echo "configure:4500: checking for dlerror" >&5
-+echo "configure:4419: checking for dlerror" >&5
- if eval "test \"`echo '$''{'ac_cv_func_dlerror'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
--#line 4505 "configure"
-+#line 4424 "configure"
- #include "confdefs.h"
- /* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char dlerror(); below. */
-@@ -4524,7 +4443,7 @@
-
- ; return 0; }
- EOF
--if { (eval echo configure:4528: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:4447: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_dlerror=yes"
- else
-@@ -4608,7 +4527,7 @@
- case $host in
- *-*-solaris*)
- echo $ac_n "checking for cond_init in -lthread""... $ac_c" 1>&6
--echo "configure:4612: checking for cond_init in -lthread" >&5
-+echo "configure:4531: checking for cond_init in -lthread" >&5
- ac_lib_var=`echo thread'_'cond_init | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-@@ -4616,7 +4535,7 @@
- ac_save_LIBS="$LIBS"
- LIBS="-lthread $LIBS"
- cat > conftest.$ac_ext <<EOF
--#line 4620 "configure"
-+#line 4539 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- /* We use char because int might match the return type of a gcc2
-@@ -4627,7 +4546,7 @@
- cond_init()
- ; return 0; }
- EOF
--if { (eval echo configure:4631: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:4550: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
-@@ -4654,17 +4573,17 @@
- if test "x$have_threads" = xnone; then
- ac_safe=`echo "pthread.h" | sed 'y%./+-%__p_%'`
- echo $ac_n "checking for pthread.h""... $ac_c" 1>&6
--echo "configure:4658: checking for pthread.h" >&5
-+echo "configure:4577: checking for pthread.h" >&5
- if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
--#line 4663 "configure"
-+#line 4582 "configure"
- #include "confdefs.h"
- #include <pthread.h>
- EOF
- ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:4668: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-+{ (eval echo configure:4587: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
- ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
- if test -z "$ac_err"; then
- rm -rf conftest*
-@@ -4690,7 +4609,7 @@
- if test "x$want_threads" = xyes || test "x$want_threads" = xnspr; then
- if test "x$have_threads" = xnone; then
- echo $ac_n "checking for PRP_NewNakedCondVar in -lnspr21""... $ac_c" 1>&6
--echo "configure:4694: checking for PRP_NewNakedCondVar in -lnspr21" >&5
-+echo "configure:4613: checking for PRP_NewNakedCondVar in -lnspr21" >&5
- ac_lib_var=`echo nspr21'_'PRP_NewNakedCondVar | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-@@ -4698,7 +4617,7 @@
- ac_save_LIBS="$LIBS"
- LIBS="-lnspr21 $LIBS"
- cat > conftest.$ac_ext <<EOF
--#line 4702 "configure"
-+#line 4621 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- /* We use char because int might match the return type of a gcc2
-@@ -4709,7 +4628,7 @@
- PRP_NewNakedCondVar()
- ; return 0; }
- EOF
--if { (eval echo configure:4713: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:4632: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
-@@ -4733,7 +4652,7 @@
- fi
-
- echo $ac_n "checking for thread implementation""... $ac_c" 1>&6
--echo "configure:4737: checking for thread implementation" >&5
-+echo "configure:4656: checking for thread implementation" >&5
-
- if test "x$have_threads" = xnone && test "x$want_threads" != xno; then
- echo "$ac_t""none available" 1>&6
-@@ -4752,7 +4671,7 @@
- posix)
- G_THREAD_LIBS=error
- echo $ac_n "checking for pthread_attr_init in -lpthread""... $ac_c" 1>&6
--echo "configure:4756: checking for pthread_attr_init in -lpthread" >&5
-+echo "configure:4675: checking for pthread_attr_init in -lpthread" >&5
- ac_lib_var=`echo pthread'_'pthread_attr_init | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-@@ -4760,7 +4679,7 @@
- ac_save_LIBS="$LIBS"
- LIBS="-lpthread $LIBS"
- cat > conftest.$ac_ext <<EOF
--#line 4764 "configure"
-+#line 4683 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- /* We use char because int might match the return type of a gcc2
-@@ -4771,7 +4690,7 @@
- pthread_attr_init()
- ; return 0; }
- EOF
--if { (eval echo configure:4775: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:4694: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
-@@ -4793,7 +4712,7 @@
-
- if test "x$G_THREAD_LIBS" = xerror; then
- echo $ac_n "checking for pthread_attr_init in -lpthreads""... $ac_c" 1>&6
--echo "configure:4797: checking for pthread_attr_init in -lpthreads" >&5
-+echo "configure:4716: checking for pthread_attr_init in -lpthreads" >&5
- ac_lib_var=`echo pthreads'_'pthread_attr_init | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-@@ -4801,7 +4720,7 @@
- ac_save_LIBS="$LIBS"
- LIBS="-lpthreads $LIBS"
- cat > conftest.$ac_ext <<EOF
--#line 4805 "configure"
-+#line 4724 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- /* We use char because int might match the return type of a gcc2
-@@ -4812,7 +4731,7 @@
- pthread_attr_init()
- ; return 0; }
- EOF
--if { (eval echo configure:4816: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:4735: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
-@@ -4835,7 +4754,7 @@
- fi
- if test "x$G_THREAD_LIBS" = xerror; then
- echo $ac_n "checking for pthread_attr_init in -lthread""... $ac_c" 1>&6
--echo "configure:4839: checking for pthread_attr_init in -lthread" >&5
-+echo "configure:4758: checking for pthread_attr_init in -lthread" >&5
- ac_lib_var=`echo thread'_'pthread_attr_init | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-@@ -4843,7 +4762,7 @@
- ac_save_LIBS="$LIBS"
- LIBS="-lthread $LIBS"
- cat > conftest.$ac_ext <<EOF
--#line 4847 "configure"
-+#line 4766 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- /* We use char because int might match the return type of a gcc2
-@@ -4854,7 +4773,7 @@
- pthread_attr_init()
- ; return 0; }
- EOF
--if { (eval echo configure:4858: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:4777: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
-@@ -4877,7 +4796,7 @@
- fi
- if test "x$G_THREAD_LIBS" = xerror; then
- echo $ac_n "checking for pthread_attr_init in -lc_r""... $ac_c" 1>&6
--echo "configure:4881: checking for pthread_attr_init in -lc_r" >&5
-+echo "configure:4800: checking for pthread_attr_init in -lc_r" >&5
- ac_lib_var=`echo c_r'_'pthread_attr_init | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-@@ -4885,7 +4804,7 @@
- ac_save_LIBS="$LIBS"
- LIBS="-lc_r $LIBS"
- cat > conftest.$ac_ext <<EOF
--#line 4889 "configure"
-+#line 4808 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- /* We use char because int might match the return type of a gcc2
-@@ -4896,7 +4815,7 @@
- pthread_attr_init()
- ; return 0; }
- EOF
--if { (eval echo configure:4900: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:4819: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
-@@ -4919,12 +4838,12 @@
- fi
- if test "x$G_THREAD_LIBS" = xerror; then
- echo $ac_n "checking for pthread_attr_init""... $ac_c" 1>&6
--echo "configure:4923: checking for pthread_attr_init" >&5
-+echo "configure:4842: checking for pthread_attr_init" >&5
- if eval "test \"`echo '$''{'ac_cv_func_pthread_attr_init'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
--#line 4928 "configure"
-+#line 4847 "configure"
- #include "confdefs.h"
- /* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char pthread_attr_init(); below. */
-@@ -4947,7 +4866,7 @@
-
- ; return 0; }
- EOF
--if { (eval echo configure:4951: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:4870: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_pthread_attr_init=yes"
- else
-@@ -4969,7 +4888,7 @@
- fi
- if test "x$G_THREAD_LIBS" = xerror; then
- echo $ac_n "checking for __d10_pthread_attr_init in -lthread""... $ac_c" 1>&6
--echo "configure:4973: checking for __d10_pthread_attr_init in -lthread" >&5
-+echo "configure:4892: checking for __d10_pthread_attr_init in -lthread" >&5
- ac_lib_var=`echo thread'_'__d10_pthread_attr_init | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-@@ -4977,7 +4896,7 @@
- ac_save_LIBS="$LIBS"
- LIBS="-lthread $LIBS"
- cat > conftest.$ac_ext <<EOF
--#line 4981 "configure"
-+#line 4900 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- /* We use char because int might match the return type of a gcc2
-@@ -4988,7 +4907,7 @@
- __d10_pthread_attr_init()
- ; return 0; }
- EOF
--if { (eval echo configure:4992: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:4911: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
-@@ -5012,7 +4931,7 @@
- fi
- if test "x$G_THREAD_LIBS" = xerror; then
- echo $ac_n "checking for __pthread_attr_init_system in -lpthread""... $ac_c" 1>&6
--echo "configure:5016: checking for __pthread_attr_init_system in -lpthread" >&5
-+echo "configure:4935: checking for __pthread_attr_init_system in -lpthread" >&5
- ac_lib_var=`echo pthread'_'__pthread_attr_init_system | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-@@ -5020,7 +4939,7 @@
- ac_save_LIBS="$LIBS"
- LIBS="-lpthread $LIBS"
- cat > conftest.$ac_ext <<EOF
--#line 5024 "configure"
-+#line 4943 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- /* We use char because int might match the return type of a gcc2
-@@ -5031,7 +4950,7 @@
- __pthread_attr_init_system()
- ; return 0; }
- EOF
--if { (eval echo configure:5035: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:4954: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
-@@ -5061,7 +4980,7 @@
- solaris)
- G_THREAD_LIBS=error
- echo $ac_n "checking for cond_init in -lthread""... $ac_c" 1>&6
--echo "configure:5065: checking for cond_init in -lthread" >&5
-+echo "configure:4984: checking for cond_init in -lthread" >&5
- ac_lib_var=`echo thread'_'cond_init | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-@@ -5069,7 +4988,7 @@
- ac_save_LIBS="$LIBS"
- LIBS="-lthread $LIBS"
- cat > conftest.$ac_ext <<EOF
--#line 5073 "configure"
-+#line 4992 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- /* We use char because int might match the return type of a gcc2
-@@ -5080,7 +4999,7 @@
- cond_init()
- ; return 0; }
- EOF
--if { (eval echo configure:5084: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:5003: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
-@@ -5108,7 +5027,7 @@
- ;;
- nspr)
- echo $ac_n "checking for PRP_NewNakedCondVar in -lnspr21""... $ac_c" 1>&6
--echo "configure:5112: checking for PRP_NewNakedCondVar in -lnspr21" >&5
-+echo "configure:5031: checking for PRP_NewNakedCondVar in -lnspr21" >&5
- ac_lib_var=`echo nspr21'_'PRP_NewNakedCondVar | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-@@ -5116,7 +5035,7 @@
- ac_save_LIBS="$LIBS"
- LIBS="-lnspr21 $LIBS"
- cat > conftest.$ac_ext <<EOF
--#line 5120 "configure"
-+#line 5039 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- /* We use char because int might match the return type of a gcc2
-@@ -5127,7 +5046,7 @@
- PRP_NewNakedCondVar()
- ; return 0; }
- EOF
--if { (eval echo configure:5131: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:5050: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
-@@ -5163,7 +5082,7 @@
- fi
-
- echo $ac_n "checking necessary linker options""... $ac_c" 1>&6
--echo "configure:5167: checking necessary linker options" >&5
-+echo "configure:5086: checking necessary linker options" >&5
- echo "$ac_t""$G_THREAD_LIBS" 1>&6
-
-
-@@ -5191,7 +5110,7 @@
- old_CPPFLAGS=$CPPFLAGS
- CPPFLAGS="$CPPFLAGS $G_THREAD_CFLAGS"
- cat > conftest.$ac_ext <<EOF
--#line 5195 "configure"
-+#line 5114 "configure"
- #include "confdefs.h"
- #include <time.h>
- EOF
-@@ -5208,7 +5127,7 @@
- CPPFLAGS=$old_CPPFLAGS
-
- echo $ac_n "checking necessary compiler options""... $ac_c" 1>&6
--echo "configure:5212: checking necessary compiler options" >&5
-+echo "configure:5131: checking necessary compiler options" >&5
-
- echo "$ac_t""$G_THREAD_CFLAGS" 1>&6
- else
-@@ -5226,12 +5145,12 @@
- for ac_func in localtime_r rand_r
- do
- echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
--echo "configure:5230: checking for $ac_func" >&5
-+echo "configure:5149: checking for $ac_func" >&5
- if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
--#line 5235 "configure"
-+#line 5154 "configure"
- #include "confdefs.h"
- /* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-@@ -5254,7 +5173,7 @@
-
- ; return 0; }
- EOF
--if { (eval echo configure:5258: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if { (eval echo configure:5177: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
- else
-@@ -5280,15 +5199,17 @@
-
- if test "$ac_cv_header_pwd_h" = "yes"; then
- echo $ac_n "checking for getpwuid_r""... $ac_c" 1>&6
--echo "configure:5284: checking for getpwuid_r" >&5
-+echo "configure:5203: checking for getpwuid_r" >&5
- if eval "test \"`echo '$''{'ac_cv_func_getpwuid_r'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-+ echo "configure: warning: cannot check it if cross compiling -- defaulting to yes" 1>&2
-+ ac_cv_func_getpwuid_r=yes
-+
- else
- cat > conftest.$ac_ext <<EOF
--#line 5292 "configure"
-+#line 5213 "configure"
- #include "confdefs.h"
- #include <errno.h>
- int main () { char buffer[10000], *pointer;
-@@ -5300,7 +5221,7 @@
- sizeof (buffer), &pointer);
- return errno == ENOSYS || error == ENOSYS;}
- EOF
--if { (eval echo configure:5304: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-+if { (eval echo configure:5225: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
- then
- ac_cv_func_getpwuid_r=yes
- else
-@@ -5312,6 +5233,7 @@
- rm -fr conftest*
- fi
-
-+
- fi
-
- if test "$ac_cv_func_getpwuid_r" = yes; then
-@@ -5325,11 +5247,11 @@
- fi
- if test "$ac_cv_func_getpwuid_r" = "yes"; then
- echo $ac_n "checking whether getpwuid_r is posix like""... $ac_c" 1>&6
--echo "configure:5329: checking whether getpwuid_r is posix like" >&5
-+echo "configure:5251: checking whether getpwuid_r is posix like" >&5
- # The signature for the POSIX version is:
- # int getpwuid_r(uid_t, struct passwd *, char *, size_t, struct passwd **)
- cat > conftest.$ac_ext <<EOF
--#line 5333 "configure"
-+#line 5255 "configure"
- #include "confdefs.h"
- #include <pwd.h>
- #include <sys/types.h>
-@@ -5338,7 +5260,7 @@
- getpwuid_r((uid_t)0, NULL, NULL, (size_t)0, NULL);
- ; return 0; }
- EOF
--if { (eval echo configure:5342: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-+if { (eval echo configure:5264: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- cat >> confdefs.h <<\EOF
- #define HAVE_GETPWUID_R_POSIX 1
-@@ -5357,17 +5279,17 @@
- if test x"$have_threads" = xposix; then
- LIBS="$LIBS $G_THREAD_LIBS"
- echo $ac_n "checking whether pthread_getspecific is posix like""... $ac_c" 1>&6
--echo "configure:5361: checking whether pthread_getspecific is posix like" >&5
-+echo "configure:5283: checking whether pthread_getspecific is posix like" >&5
- # PCThreads has pthread_getspecific(pthread_key_t, void **);
- cat > conftest.$ac_ext <<EOF
--#line 5364 "configure"
-+#line 5286 "configure"
- #include "confdefs.h"
- #include <pthread.h>
- int main() {
- pthread_getspecific(0,NULL);
- ; return 0; }
- EOF
--if { (eval echo configure:5371: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-+if { (eval echo configure:5293: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- echo "$ac_t""no" 1>&6
- else
-@@ -5382,20 +5304,25 @@
- fi
- rm -f conftest*
- echo $ac_n "checking whether pthread_mutex_trylock is posix like""... $ac_c" 1>&6
--echo "configure:5386: checking whether pthread_mutex_trylock is posix like" >&5
-+echo "configure:5308: checking whether pthread_mutex_trylock is posix like" >&5
- # DCE Threads return 1 as success, posix 0. what a mess.
- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-+ echo "configure: warning: cannot check it if cross compiling -- defaulting to yes" 1>&2
-+ cat >> confdefs.h <<\EOF
-+#define HAVE_PTHREAD_MUTEX_TRYLOCK_POSIX 1
-+EOF
-+
-+
- else
- cat > conftest.$ac_ext <<EOF
--#line 5392 "configure"
-+#line 5319 "configure"
- #include "confdefs.h"
- #include <pthread.h>
- pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
- int main () {
- return !pthread_mutex_trylock (&mutex); }
- EOF
--if { (eval echo configure:5399: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-+if { (eval echo configure:5326: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
- then
- echo "$ac_t""no" 1>&6
- else
-@@ -5412,13 +5339,18 @@
- fi
-
- echo $ac_n "checking whether pthread_cond_timedwait is posix like""... $ac_c" 1>&6
--echo "configure:5416: checking whether pthread_cond_timedwait is posix like" >&5
-+echo "configure:5343: checking whether pthread_cond_timedwait is posix like" >&5
- # DCE Threads return -1 as failure, posix ETIMEDOUT.
- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-+ echo "configure: warning: cannot check it if cross compiling -- defaulting to yes" 1>&2
-+ cat >> confdefs.h <<\EOF
-+#define HAVE_PTHREAD_COND_TIMEDWAIT_POSIX 1
-+EOF
-+
-+
- else
- cat > conftest.$ac_ext <<EOF
--#line 5422 "configure"
-+#line 5354 "configure"
- #include "confdefs.h"
- #include <pthread.h>
- int main () {
-@@ -5432,7 +5364,7 @@
- return pthread_cond_timedwait (&cond,&mutex,&tspec)
- != -1;}
- EOF
--if { (eval echo configure:5436: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-+if { (eval echo configure:5368: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
- then
- echo "$ac_t""no" 1>&6
- else
-@@ -5475,15 +5407,16 @@
- case "$mutex_has_default" in
- "yes")
- echo $ac_n "checking size of $mutex_default_type""... $ac_c" 1>&6
--echo "configure:5479: checking size of $mutex_default_type" >&5
-+echo "configure:5411: checking size of $mutex_default_type" >&5
- if eval "test \"`echo '$''{'glib_cv_sizeof_gmutex'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-+ glib_cv_sizeof_gmutex=24
-+
- else
- cat > conftest.$ac_ext <<EOF
--#line 5487 "configure"
-+#line 5420 "configure"
- #include "confdefs.h"
- #include <stdio.h>
- #include <$mutex_header_file>
-@@ -5495,7 +5428,7 @@
- exit(0);
- }
- EOF
--if { (eval echo configure:5499: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-+if { (eval echo configure:5432: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
- then
- glib_cv_sizeof_gmutex=`cat conftestval`
- else
-@@ -5515,7 +5448,7 @@
-
-
- echo $ac_n "checking byte contents of $mutex_default_type""... $ac_c" 1>&6
--echo "configure:5519: checking byte contents of $mutex_default_type" >&5
-+echo "configure:5452: checking byte contents of $mutex_default_type" >&5
- if eval "test \"`echo '$''{'glib_cv_byte_contents_gmutex'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
-@@ -5523,7 +5456,7 @@
- glib_cv_byte_contents_gmutex=0
- else
- cat > conftest.$ac_ext <<EOF
--#line 5527 "configure"
-+#line 5460 "configure"
- #include "confdefs.h"
- #include <stdio.h>
- #include <$mutex_header_file>
-@@ -5540,7 +5473,7 @@
- exit(0);
- }
- EOF
--if { (eval echo configure:5544: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-+if { (eval echo configure:5477: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
- then
- glib_cv_byte_contents_gmutex=`cat conftestval`
- else
-@@ -5576,7 +5509,7 @@
- glib_nl='\n'
- fi
- echo $ac_n "checking system definitions for $glib_sysdef_msg""... $ac_c" 1>&6
--echo "configure:5580: checking system definitions for $glib_sysdef_msg" >&5
-+echo "configure:5513: checking system definitions for $glib_sysdef_msg" >&5
- cat >confrun.c <<_______EOF
- #include <stdio.h>
- #include <sys/types.h>
-@@ -5600,14 +5533,25 @@
- done
- echo "return 0; }" >>confrun.c
- if test "$cross_compiling" = yes; then
-- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-+ for glib_sysdef_input in POLLIN:1 POLLOUT:4 POLLPRI:2 POLLERR:8 POLLHUP:16 POLLNVAL:32 ; do
-+ glib_sysdef=`echo $glib_sysdef_input | sed 's/^\([^:]*\):.*$/\1/'`
-+ glib_default=`echo $glib_sysdef_input | sed 's/^[^:]*:\(.*\)$/\1/'`
-+ if test $glib_sysdef != $glib_default; then
-+ glib_default=" =$glib_default"
-+ else
-+ glib_default=
-+ fi
-+ echo "#define GLIB_SYSDEF_$glib_sysdef$glib_default" >>$glib_sysdefso
-+ done
-+ echo "configure: warning: cannot check it if cross compiling -- using defaults" 1>&2
-+
- else
- cat > conftest.$ac_ext <<EOF
--#line 5607 "configure"
-+#line 5551 "configure"
- #include "confdefs.h"
- `cat confrun.c`
- EOF
--if { (eval echo configure:5611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-+if { (eval echo configure:5555: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
- then
- echo "$ac_t""done" 1>&6
- else
--
1.7.0.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [Buildroot] [PATCH 5/5] microwin: remove deprecated package
2010-09-12 18:33 [Buildroot] [pull request] Pull request for branch for-2010.11/remove-deprecated-packages Thomas Petazzoni
` (3 preceding siblings ...)
2010-09-12 18:33 ` [Buildroot] [PATCH 4/5] libglib12: remove " Thomas Petazzoni
@ 2010-09-12 18:33 ` Thomas Petazzoni
2010-09-12 22:24 ` [Buildroot] [pull request] Pull request for branch for-2010.11/remove-deprecated-packages Peter Korsgaard
5 siblings, 0 replies; 7+ messages in thread
From: Thomas Petazzoni @ 2010-09-12 18:33 UTC (permalink / raw)
To: buildroot
Microwin is disabled in Buildroot since January 2007
(726abd4e519f97eda6f6dfc1b6b9505fc37e8b23) and nobody
complained. Moreover, the upstream project hasn't done any release
since five years, so let's remove this package, as announced in the
notes of 2010.08 release.
The project maintainer has announced in June 2010 that he is working
again on the project, and he has switched to Git. When a new release
is done, we can re-introduce it if people need it (this old package
needed serious work to be converted to the new package infrastructure
anyway).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/Config.in | 3 --
package/microwin/Config.in | 9 ------
package/microwin/microwin.mk | 61 ------------------------------------------
3 files changed, 0 insertions(+), 73 deletions(-)
delete mode 100644 package/microwin/Config.in
delete mode 100644 package/microwin/microwin.mk
diff --git a/package/Config.in b/package/Config.in
index 50f8841..2209b55 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -107,9 +107,6 @@ source "package/sdl_gfx/Config.in"
comment "other GUIs"
source "package/qt/Config.in"
-
-#source "package/microwin/Config.in"
-
source "package/x11r7/Config.in"
comment "X libraries and helper libraries"
diff --git a/package/microwin/Config.in b/package/microwin/Config.in
deleted file mode 100644
index 35a0370..0000000
--- a/package/microwin/Config.in
+++ /dev/null
@@ -1,9 +0,0 @@
-config BR2_PACKAGE_MICROWIN
- bool "microwin"
- # Old, unmaintained graphics stack
- depends on BR2_DEPRECATED
- help
- Microwindows Graphical User Interface for small and
- embedded enviroments.
-
- http://microwindows.censoft.com/
diff --git a/package/microwin/microwin.mk b/package/microwin/microwin.mk
deleted file mode 100644
index 5c7d303..0000000
--- a/package/microwin/microwin.mk
+++ /dev/null
@@ -1,61 +0,0 @@
-#############################################################
-#
-# Microwindows - 2003/11/17 Greg Haerr
-# (requires CVS 2003/11/17 or later)
-#
-#############################################################
-MICROWIN_SITE:=ftp://ftp.microwindows.org/pub/microwindows
-MICROWIN_SOURCE:=microwindows-src-snapshot.tar.gz
-MICROWIN_DIR:=$(BUILD_DIR)/microwin
-#MICROWIN_SOURCE:=microwindows-0.91.tar.gz
-#MICROWIN_DIR:=$(BUILD_DIR)/microwindows-0.91
-
-MICROWIN_CAT:=$(ZCAT)
-MICROWIN_BINARY:=$(MICROWIN_DIR)/src/bin/nano-X
-MICROWIN_TARGET_BINARY:=$(TARGET_DIR)/usr/bin/nano-X
-MICROWIN_VERSION=$(subst $(MICROWIN_DIR)/microwindows-,,$(wildcard $(MICROWIN_DIR)/microwindows-*))
-
-MICROWIN_CONFIG:=$(MICROWIN_DIR)/src/Configs/config.uclibc
-
-$(DL_DIR)/$(MICROWIN_SOURCE):
- $(call DOWNLOAD,$(MICROWIN_SITE),$(MICROWIN_SOURCE))
-
-microwin-source: $(DL_DIR)/$(MICROWIN_SOURCE)
-
-$(MICROWIN_DIR)/.unpacked: $(DL_DIR)/$(MICROWIN_SOURCE)
- [ -d $(MICROWIN_DIR) ] || mkdir $(MICROWIN_DIR)
- $(MICROWIN_CAT) $(DL_DIR)/$(MICROWIN_SOURCE) | tar -C $(MICROWIN_DIR) $(TAR_OPTIONS) -
- touch $(MICROWIN_DIR)/.unpacked
-
-$(MICROWIN_DIR)/.prepared: $(MICROWIN_DIR)/.unpacked
- mv $(MICROWIN_DIR)/microwindows-$(MICROWIN_VERSION)/* $(MICROWIN_DIR)
- toolchain/patch-kernel.sh $(MICROWIN_DIR) package/microwin/ microwindows-$(MICROWIN_VERSION)\*.patch
- touch $(MICROWIN_DIR)/.prepared
-
-$(MICROWIN_DIR)/.configured: $(MICROWIN_DIR)/.prepared
- (cd $(MICROWIN_DIR); \
- )
- touch $(MICROWIN_DIR)/.configured
-
-$(MICROWIN_BINARY): $(MICROWIN_DIR)/.configured
- $(MAKE) ARCH=LINUX-$(shell echo $(ARCH) | tr a-z A-Z) $(shell echo $(ARCH) | tr a-z A-Z)TOOLSPREFIX=$(TARGET_CROSS) CC="$(TARGET_CC)" -C $(MICROWIN_DIR)/src CONFIG=$(MICROWIN_CONFIG)
-
-$(MICROWIN_TARGET_BINARY): $(MICROWIN_BINARY)
- $(MAKE) INSTALL_PREFIX=$(TARGET_DIR)/usr INSTALL_OWNER1= INSTALL_OWNER2= CC="$(TARGET_CC)" -C $(MICROWIN_DIR)/src CONFIG=$(MICROWIN_CONFIG) install
-
-microwin: $(MICROWIN_TARGET_BINARY)
-
-microwin-clean:
- -$(MAKE) -C $(MICROWIN_DIR)/src clean
-
-microwin-dirclean:
- rm -rf $(MICROWIN_DIR)
-
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_PACKAGE_MICROWIN),y)
-TARGETS+=microwin
-endif
--
1.7.0.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [Buildroot] [pull request] Pull request for branch for-2010.11/remove-deprecated-packages
2010-09-12 18:33 [Buildroot] [pull request] Pull request for branch for-2010.11/remove-deprecated-packages Thomas Petazzoni
` (4 preceding siblings ...)
2010-09-12 18:33 ` [Buildroot] [PATCH 5/5] microwin: " Thomas Petazzoni
@ 2010-09-12 22:24 ` Peter Korsgaard
5 siblings, 0 replies; 7+ messages in thread
From: Peter Korsgaard @ 2010-09-12 22:24 UTC (permalink / raw)
To: buildroot
>>>>> "Thomas" == Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes:
Thomas> Hello,
Thomas> This set of patches removes five packages that were marked as
Thomas> deprecated and to be removed in the release notes of 2010.08 :
Thomas> * The GTK 1.x stack, and its only user in Buildroot, the Dillo web
Thomas> browser. Newer versions of Dillo use FLTK 2, if someone needs it,
Thomas> we can package it.
Thomas> * The pcmcia-cs package, which is useless with 2.6 kernels.
Thomas> Peter: the libgtk12 removal contains a patch that has a line longer
Thomas> than 998, so if you apply the patch using the e-mail sent to the list,
Thomas> it may not work. Instead, could you pull the branch directly from
Thomas> git.busybox.net ?
Pulled and pushed, thanks!
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2010-09-12 22:24 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-09-12 18:33 [Buildroot] [pull request] Pull request for branch for-2010.11/remove-deprecated-packages Thomas Petazzoni
2010-09-12 18:33 ` [Buildroot] [PATCH 1/5] pcmcia: remove deprecated package Thomas Petazzoni
2010-09-12 18:33 ` [Buildroot] [PATCH 2/5] dillo: " Thomas Petazzoni
2010-09-12 18:33 ` [Buildroot] [PATCH 3/5] libgtk12: Remove " Thomas Petazzoni
2010-09-12 18:33 ` [Buildroot] [PATCH 4/5] libglib12: remove " Thomas Petazzoni
2010-09-12 18:33 ` [Buildroot] [PATCH 5/5] microwin: " Thomas Petazzoni
2010-09-12 22:24 ` [Buildroot] [pull request] Pull request for branch for-2010.11/remove-deprecated-packages Peter Korsgaard
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.