All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
To: Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Kevin Hilman <khilman@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org,
	Christophe JAILLET <christophe.jaillet@wanadoo.fr>,
	linux-watchdog@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org
Subject: [PATCH] watchdog: meson_gxbb: Use devm_clk_get_enabled() helper
Date: Sat, 31 Dec 2022 13:34:44 +0100	[thread overview]
Message-ID: <6c5948373d309408095c1a098b7b4c491c5265f7.1672490071.git.christophe.jaillet@wanadoo.fr> (raw)

The devm_clk_get_enabled() helper:
   - calls devm_clk_get()
   - calls clk_prepare_enable() and registers what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids the need of a dedicated function used
with devm_add_action_or_reset().

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
 drivers/watchdog/meson_gxbb_wdt.c | 16 +---------------
 1 file changed, 1 insertion(+), 15 deletions(-)

diff --git a/drivers/watchdog/meson_gxbb_wdt.c b/drivers/watchdog/meson_gxbb_wdt.c
index 981a2f7c3bec..35d80cb39856 100644
--- a/drivers/watchdog/meson_gxbb_wdt.c
+++ b/drivers/watchdog/meson_gxbb_wdt.c
@@ -146,16 +146,10 @@ static const struct of_device_id meson_gxbb_wdt_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, meson_gxbb_wdt_dt_ids);
 
-static void meson_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int meson_gxbb_wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct meson_gxbb_wdt *data;
-	int ret;
 	u32 ctrl_reg;
 
 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
@@ -166,18 +160,10 @@ static int meson_gxbb_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(data->reg_base))
 		return PTR_ERR(data->reg_base);
 
-	data->clk = devm_clk_get(dev, NULL);
+	data->clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(data->clk))
 		return PTR_ERR(data->clk);
 
-	ret = clk_prepare_enable(data->clk);
-	if (ret)
-		return ret;
-	ret = devm_add_action_or_reset(dev, meson_clk_disable_unprepare,
-				       data->clk);
-	if (ret)
-		return ret;
-
 	platform_set_drvdata(pdev, data);
 
 	data->wdt_dev.parent = dev;
-- 
2.34.1


WARNING: multiple messages have this Message-ID (diff)
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
To: Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Kevin Hilman <khilman@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org,
	Christophe JAILLET <christophe.jaillet@wanadoo.fr>,
	linux-watchdog@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org
Subject: [PATCH] watchdog: meson_gxbb: Use devm_clk_get_enabled() helper
Date: Sat, 31 Dec 2022 13:34:44 +0100	[thread overview]
Message-ID: <6c5948373d309408095c1a098b7b4c491c5265f7.1672490071.git.christophe.jaillet@wanadoo.fr> (raw)

The devm_clk_get_enabled() helper:
   - calls devm_clk_get()
   - calls clk_prepare_enable() and registers what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids the need of a dedicated function used
with devm_add_action_or_reset().

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
 drivers/watchdog/meson_gxbb_wdt.c | 16 +---------------
 1 file changed, 1 insertion(+), 15 deletions(-)

diff --git a/drivers/watchdog/meson_gxbb_wdt.c b/drivers/watchdog/meson_gxbb_wdt.c
index 981a2f7c3bec..35d80cb39856 100644
--- a/drivers/watchdog/meson_gxbb_wdt.c
+++ b/drivers/watchdog/meson_gxbb_wdt.c
@@ -146,16 +146,10 @@ static const struct of_device_id meson_gxbb_wdt_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, meson_gxbb_wdt_dt_ids);
 
-static void meson_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int meson_gxbb_wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct meson_gxbb_wdt *data;
-	int ret;
 	u32 ctrl_reg;
 
 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
@@ -166,18 +160,10 @@ static int meson_gxbb_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(data->reg_base))
 		return PTR_ERR(data->reg_base);
 
-	data->clk = devm_clk_get(dev, NULL);
+	data->clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(data->clk))
 		return PTR_ERR(data->clk);
 
-	ret = clk_prepare_enable(data->clk);
-	if (ret)
-		return ret;
-	ret = devm_add_action_or_reset(dev, meson_clk_disable_unprepare,
-				       data->clk);
-	if (ret)
-		return ret;
-
 	platform_set_drvdata(pdev, data);
 
 	data->wdt_dev.parent = dev;
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

WARNING: multiple messages have this Message-ID (diff)
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
To: Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Kevin Hilman <khilman@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org,
	Christophe JAILLET <christophe.jaillet@wanadoo.fr>,
	linux-watchdog@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org
Subject: [PATCH] watchdog: meson_gxbb: Use devm_clk_get_enabled() helper
Date: Sat, 31 Dec 2022 13:34:44 +0100	[thread overview]
Message-ID: <6c5948373d309408095c1a098b7b4c491c5265f7.1672490071.git.christophe.jaillet@wanadoo.fr> (raw)

The devm_clk_get_enabled() helper:
   - calls devm_clk_get()
   - calls clk_prepare_enable() and registers what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids the need of a dedicated function used
with devm_add_action_or_reset().

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
 drivers/watchdog/meson_gxbb_wdt.c | 16 +---------------
 1 file changed, 1 insertion(+), 15 deletions(-)

diff --git a/drivers/watchdog/meson_gxbb_wdt.c b/drivers/watchdog/meson_gxbb_wdt.c
index 981a2f7c3bec..35d80cb39856 100644
--- a/drivers/watchdog/meson_gxbb_wdt.c
+++ b/drivers/watchdog/meson_gxbb_wdt.c
@@ -146,16 +146,10 @@ static const struct of_device_id meson_gxbb_wdt_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, meson_gxbb_wdt_dt_ids);
 
-static void meson_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int meson_gxbb_wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct meson_gxbb_wdt *data;
-	int ret;
 	u32 ctrl_reg;
 
 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
@@ -166,18 +160,10 @@ static int meson_gxbb_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(data->reg_base))
 		return PTR_ERR(data->reg_base);
 
-	data->clk = devm_clk_get(dev, NULL);
+	data->clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(data->clk))
 		return PTR_ERR(data->clk);
 
-	ret = clk_prepare_enable(data->clk);
-	if (ret)
-		return ret;
-	ret = devm_add_action_or_reset(dev, meson_clk_disable_unprepare,
-				       data->clk);
-	if (ret)
-		return ret;
-
 	platform_set_drvdata(pdev, data);
 
 	data->wdt_dev.parent = dev;
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2022-12-31 12:35 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-31 12:34 Christophe JAILLET [this message]
2022-12-31 12:34 ` [PATCH] watchdog: meson_gxbb: Use devm_clk_get_enabled() helper Christophe JAILLET
2022-12-31 12:34 ` Christophe JAILLET
2023-01-03 21:13 ` Guenter Roeck
2023-01-03 21:13   ` Guenter Roeck
2023-01-03 21:13   ` Guenter Roeck
2023-01-03 21:26 ` Martin Blumenstingl
2023-01-03 21:26   ` Martin Blumenstingl
2023-01-03 21:26   ` Martin Blumenstingl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6c5948373d309408095c1a098b7b4c491c5265f7.1672490071.git.christophe.jaillet@wanadoo.fr \
    --to=christophe.jaillet@wanadoo.fr \
    --cc=jbrunet@baylibre.com \
    --cc=kernel-janitors@vger.kernel.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=neil.armstrong@linaro.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.