[PATCH v3] powerpc/32: Add support for out-of-line static calls

[PATCH v3] powerpc/32: Add support for out-of-line static calls

[Christophe Leroy]

Add support for out-of-line static calls on PPC32. This change
improve performance of calls to global function pointers by
using direct calls instead of indirect calls.

The trampoline is initialy populated with a 'blr' or branch to target,
followed by an unreachable long jump sequence.

In order to cater with parallele execution, the trampoline needs to
be updated in a way that ensures it remains consistent at all time.
This means we can't use the traditional lis/addi to load r12 with
the target address, otherwise there would be a window during which
the first instruction contains the upper part of the new target
address while the second instruction still contains the lower part of
the old target address. To avoid that the target address is stored
just after the 'bctr' and loaded from there with a single instruction.

Then, depending on the target distance, arch_static_call_transform()
will either replace the first instruction by a direct 'bl <target>' or
'nop' in order to have the trampoline fall through the long jump
sequence.

For the special case of __static_call_return0(), to avoid the risk of
a far branch, a version of it is inlined at the end of the trampoline.

Performancewise the long jump sequence is probably not better than
the indirect calls set by GCC when we don't use static calls, but
such calls are unlikely to be required on powerpc32: With most
configurations the kernel size is far below 32 Mbytes so only
modules may happen to be too far. And even modules are likely to
be close enough as they are allocated below the kernel core and
as close as possible of the kernel text.

static_call selftest is running successfully with this change.

With this patch, __do_irq() has the following sequence to trace
irq entries:

	c0004a00 <__SCT__tp_func_irq_entry>:
	c0004a00:	48 00 00 e0 	b       c0004ae0 <__traceiter_irq_entry>
	c0004a04:	3d 80 c0 00 	lis     r12,-16384
	c0004a08:	81 8c 4a 1c 	lwz     r12,18972(r12)
	c0004a0c:	7d 89 03 a6 	mtctr   r12
	c0004a10:	4e 80 04 20 	bctr
	c0004a14:	38 60 00 00 	li      r3,0
	c0004a18:	4e 80 00 20 	blr
	c0004a1c:	00 00 00 00 	.long 0x0
...
	c0005654 <__do_irq>:
...
	c0005664:	7c 7f 1b 78 	mr      r31,r3
...
	c00056a0:	81 22 00 00 	lwz     r9,0(r2)
	c00056a4:	39 29 00 01 	addi    r9,r9,1
	c00056a8:	91 22 00 00 	stw     r9,0(r2)
	c00056ac:	3d 20 c0 af 	lis     r9,-16209
	c00056b0:	81 29 74 cc 	lwz     r9,29900(r9)
	c00056b4:	2c 09 00 00 	cmpwi   r9,0
	c00056b8:	41 82 00 10 	beq     c00056c8 <__do_irq+0x74>
	c00056bc:	80 69 00 04 	lwz     r3,4(r9)
	c00056c0:	7f e4 fb 78 	mr      r4,r31
	c00056c4:	4b ff f3 3d 	bl      c0004a00 <__SCT__tp_func_irq_entry>

Before this patch, __do_irq() was doing the following to trace irq
entries:

	c0005700 <__do_irq>:
...
	c0005710:	7c 7e 1b 78 	mr      r30,r3
...
	c000574c:	93 e1 00 0c 	stw     r31,12(r1)
	c0005750:	81 22 00 00 	lwz     r9,0(r2)
	c0005754:	39 29 00 01 	addi    r9,r9,1
	c0005758:	91 22 00 00 	stw     r9,0(r2)
	c000575c:	3d 20 c0 af 	lis     r9,-16209
	c0005760:	83 e9 f4 cc 	lwz     r31,-2868(r9)
	c0005764:	2c 1f 00 00 	cmpwi   r31,0
	c0005768:	41 82 00 24 	beq     c000578c <__do_irq+0x8c>
	c000576c:	81 3f 00 00 	lwz     r9,0(r31)
	c0005770:	80 7f 00 04 	lwz     r3,4(r31)
	c0005774:	7d 29 03 a6 	mtctr   r9
	c0005778:	7f c4 f3 78 	mr      r4,r30
	c000577c:	4e 80 04 21 	bctrl
	c0005780:	85 3f 00 0c 	lwzu    r9,12(r31)
	c0005784:	2c 09 00 00 	cmpwi   r9,0
	c0005788:	40 82 ff e4 	bne     c000576c <__do_irq+0x6c>

Behind the fact of now using a direct 'bl' instead of a
'load/mtctr/bctr' sequence, we can also see that we get one less
register on the stack.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
v3: Adding the special case of __static_call_return0()

v2: Use indirect load in long jump sequence to cater with parallele execution and preemption.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
 arch/powerpc/Kconfig                   |  1 +
 arch/powerpc/include/asm/static_call.h | 28 +++++++++++++++++++
 arch/powerpc/kernel/Makefile           |  2 +-
 arch/powerpc/kernel/static_call.c      | 37 ++++++++++++++++++++++++++
 4 files changed, 67 insertions(+), 1 deletion(-)
 create mode 100644 arch/powerpc/include/asm/static_call.h
 create mode 100644 arch/powerpc/kernel/static_call.c

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 36b72d972568..a0fe69d8ec83 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -247,6 +247,7 @@ config PPC
 	select HAVE_SOFTIRQ_ON_OWN_STACK
 	select HAVE_STACKPROTECTOR		if PPC32 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r2)
 	select HAVE_STACKPROTECTOR		if PPC64 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r13)
+	select HAVE_STATIC_CALL			if PPC32
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_VIRT_CPU_ACCOUNTING
 	select HUGETLB_PAGE_SIZE_VARIABLE	if PPC_BOOK3S_64 && HUGETLB_PAGE
diff --git a/arch/powerpc/include/asm/static_call.h b/arch/powerpc/include/asm/static_call.h
new file mode 100644
index 000000000000..0a0bc79bd1fa
--- /dev/null
+++ b/arch/powerpc/include/asm/static_call.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_POWERPC_STATIC_CALL_H
+#define _ASM_POWERPC_STATIC_CALL_H
+
+#define __PPC_SCT(name, inst)					\
+	asm(".pushsection .text, \"ax\"				\n"	\
+	    ".align 5						\n"	\
+	    ".globl " STATIC_CALL_TRAMP_STR(name) "		\n"	\
+	    STATIC_CALL_TRAMP_STR(name) ":			\n"	\
+	    inst "						\n"	\
+	    "	lis	12,2f@ha				\n"	\
+	    "	lwz	12,2f@l(12)				\n"	\
+	    "	mtctr	12					\n"	\
+	    "	bctr						\n"	\
+	    "1:	li	3, 0					\n"	\
+	    "	blr						\n"	\
+	    "2:	.long 0						\n"	\
+	    ".type " STATIC_CALL_TRAMP_STR(name) ", @function	\n"	\
+	    ".size " STATIC_CALL_TRAMP_STR(name) ", . - " STATIC_CALL_TRAMP_STR(name) " \n" \
+	    ".popsection					\n")
+
+#define PPC_SCT_RET0		20		/* Offset of label 1 */
+#define PPC_SCT_DATA		28		/* Offset of label 2 */
+
+#define ARCH_DEFINE_STATIC_CALL_TRAMP(name, func)	__PPC_SCT(name, "b " #func)
+#define ARCH_DEFINE_STATIC_CALL_NULL_TRAMP(name)	__PPC_SCT(name, "blr")
+
+#endif /* _ASM_POWERPC_STATIC_CALL_H */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 7be36c1e1db6..0e3640e14eb1 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -106,7 +106,7 @@ extra-y				+= vmlinux.lds
 
 obj-$(CONFIG_RELOCATABLE)	+= reloc_$(BITS).o
 
-obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o early_32.o
+obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o early_32.o static_call.o
 obj-$(CONFIG_PPC64)		+= dma-iommu.o iommu.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
diff --git a/arch/powerpc/kernel/static_call.c b/arch/powerpc/kernel/static_call.c
new file mode 100644
index 000000000000..863a7aa24650
--- /dev/null
+++ b/arch/powerpc/kernel/static_call.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/memory.h>
+#include <linux/static_call.h>
+
+#include <asm/code-patching.h>
+
+void arch_static_call_transform(void *site, void *tramp, void *func, bool tail)
+{
+	int err;
+	bool is_ret0 = (func == __static_call_return0);
+	unsigned long target = (unsigned long)(is_ret0 ? tramp + PPC_SCT_RET0 : func);
+	bool is_short = is_offset_in_branch_range((long)target - (long)tramp);
+
+	if (!tramp)
+		return;
+
+	mutex_lock(&text_mutex);
+
+	if (func && !is_short) {
+		err = patch_instruction(tramp + PPC_SCT_DATA, ppc_inst(target));
+		if (err)
+			goto out;
+	}
+
+	if (!func)
+		err = patch_instruction(tramp, ppc_inst(PPC_RAW_BLR()));
+	else if (is_short)
+		err = patch_branch(tramp, target, 0);
+	else
+		err = patch_instruction(tramp, ppc_inst(PPC_RAW_NOP()));
+out:
+	mutex_unlock(&text_mutex);
+
+	if (err)
+		panic("%s: patching failed %pS at %pS\n", __func__, func, tramp);
+}
+EXPORT_SYMBOL_GPL(arch_static_call_transform);
-- 
2.25.0

[PATCH v3] powerpc/32: Add support for out-of-line static calls

[Christophe Leroy]

Add support for out-of-line static calls on PPC32. This change
improve performance of calls to global function pointers by
using direct calls instead of indirect calls.

The trampoline is initialy populated with a 'blr' or branch to target,
followed by an unreachable long jump sequence.

In order to cater with parallele execution, the trampoline needs to
be updated in a way that ensures it remains consistent at all time.
This means we can't use the traditional lis/addi to load r12 with
the target address, otherwise there would be a window during which
the first instruction contains the upper part of the new target
address while the second instruction still contains the lower part of
the old target address. To avoid that the target address is stored
just after the 'bctr' and loaded from there with a single instruction.

Then, depending on the target distance, arch_static_call_transform()
will either replace the first instruction by a direct 'bl <target>' or
'nop' in order to have the trampoline fall through the long jump
sequence.

For the special case of __static_call_return0(), to avoid the risk of
a far branch, a version of it is inlined at the end of the trampoline.

Performancewise the long jump sequence is probably not better than
the indirect calls set by GCC when we don't use static calls, but
such calls are unlikely to be required on powerpc32: With most
configurations the kernel size is far below 32 Mbytes so only
modules may happen to be too far. And even modules are likely to
be close enough as they are allocated below the kernel core and
as close as possible of the kernel text.

static_call selftest is running successfully with this change.

With this patch, __do_irq() has the following sequence to trace
irq entries:

	c0004a00 <__SCT__tp_func_irq_entry>:
	c0004a00:	48 00 00 e0 	b       c0004ae0 <__traceiter_irq_entry>
	c0004a04:	3d 80 c0 00 	lis     r12,-16384
	c0004a08:	81 8c 4a 1c 	lwz     r12,18972(r12)
	c0004a0c:	7d 89 03 a6 	mtctr   r12
	c0004a10:	4e 80 04 20 	bctr
	c0004a14:	38 60 00 00 	li      r3,0
	c0004a18:	4e 80 00 20 	blr
	c0004a1c:	00 00 00 00 	.long 0x0
...
	c0005654 <__do_irq>:
...
	c0005664:	7c 7f 1b 78 	mr      r31,r3
...
	c00056a0:	81 22 00 00 	lwz     r9,0(r2)
	c00056a4:	39 29 00 01 	addi    r9,r9,1
	c00056a8:	91 22 00 00 	stw     r9,0(r2)
	c00056ac:	3d 20 c0 af 	lis     r9,-16209
	c00056b0:	81 29 74 cc 	lwz     r9,29900(r9)
	c00056b4:	2c 09 00 00 	cmpwi   r9,0
	c00056b8:	41 82 00 10 	beq     c00056c8 <__do_irq+0x74>
	c00056bc:	80 69 00 04 	lwz     r3,4(r9)
	c00056c0:	7f e4 fb 78 	mr      r4,r31
	c00056c4:	4b ff f3 3d 	bl      c0004a00 <__SCT__tp_func_irq_entry>

Before this patch, __do_irq() was doing the following to trace irq
entries:

	c0005700 <__do_irq>:
...
	c0005710:	7c 7e 1b 78 	mr      r30,r3
...
	c000574c:	93 e1 00 0c 	stw     r31,12(r1)
	c0005750:	81 22 00 00 	lwz     r9,0(r2)
	c0005754:	39 29 00 01 	addi    r9,r9,1
	c0005758:	91 22 00 00 	stw     r9,0(r2)
	c000575c:	3d 20 c0 af 	lis     r9,-16209
	c0005760:	83 e9 f4 cc 	lwz     r31,-2868(r9)
	c0005764:	2c 1f 00 00 	cmpwi   r31,0
	c0005768:	41 82 00 24 	beq     c000578c <__do_irq+0x8c>
	c000576c:	81 3f 00 00 	lwz     r9,0(r31)
	c0005770:	80 7f 00 04 	lwz     r3,4(r31)
	c0005774:	7d 29 03 a6 	mtctr   r9
	c0005778:	7f c4 f3 78 	mr      r4,r30
	c000577c:	4e 80 04 21 	bctrl
	c0005780:	85 3f 00 0c 	lwzu    r9,12(r31)
	c0005784:	2c 09 00 00 	cmpwi   r9,0
	c0005788:	40 82 ff e4 	bne     c000576c <__do_irq+0x6c>

Behind the fact of now using a direct 'bl' instead of a
'load/mtctr/bctr' sequence, we can also see that we get one less
register on the stack.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
v3: Adding the special case of __static_call_return0()

v2: Use indirect load in long jump sequence to cater with parallele execution and preemption.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
 arch/powerpc/Kconfig                   |  1 +
 arch/powerpc/include/asm/static_call.h | 28 +++++++++++++++++++
 arch/powerpc/kernel/Makefile           |  2 +-
 arch/powerpc/kernel/static_call.c      | 37 ++++++++++++++++++++++++++
 4 files changed, 67 insertions(+), 1 deletion(-)
 create mode 100644 arch/powerpc/include/asm/static_call.h
 create mode 100644 arch/powerpc/kernel/static_call.c

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 36b72d972568..a0fe69d8ec83 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -247,6 +247,7 @@ config PPC
 	select HAVE_SOFTIRQ_ON_OWN_STACK
 	select HAVE_STACKPROTECTOR		if PPC32 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r2)
 	select HAVE_STACKPROTECTOR		if PPC64 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r13)
+	select HAVE_STATIC_CALL			if PPC32
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_VIRT_CPU_ACCOUNTING
 	select HUGETLB_PAGE_SIZE_VARIABLE	if PPC_BOOK3S_64 && HUGETLB_PAGE
diff --git a/arch/powerpc/include/asm/static_call.h b/arch/powerpc/include/asm/static_call.h
new file mode 100644
index 000000000000..0a0bc79bd1fa
--- /dev/null
+++ b/arch/powerpc/include/asm/static_call.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_POWERPC_STATIC_CALL_H
+#define _ASM_POWERPC_STATIC_CALL_H
+
+#define __PPC_SCT(name, inst)					\
+	asm(".pushsection .text, \"ax\"				\n"	\
+	    ".align 5						\n"	\
+	    ".globl " STATIC_CALL_TRAMP_STR(name) "		\n"	\
+	    STATIC_CALL_TRAMP_STR(name) ":			\n"	\
+	    inst "						\n"	\
+	    "	lis	12,2f@ha				\n"	\
+	    "	lwz	12,2f@l(12)				\n"	\
+	    "	mtctr	12					\n"	\
+	    "	bctr						\n"	\
+	    "1:	li	3, 0					\n"	\
+	    "	blr						\n"	\
+	    "2:	.long 0						\n"	\
+	    ".type " STATIC_CALL_TRAMP_STR(name) ", @function	\n"	\
+	    ".size " STATIC_CALL_TRAMP_STR(name) ", . - " STATIC_CALL_TRAMP_STR(name) " \n" \
+	    ".popsection					\n")
+
+#define PPC_SCT_RET0		20		/* Offset of label 1 */
+#define PPC_SCT_DATA		28		/* Offset of label 2 */
+
+#define ARCH_DEFINE_STATIC_CALL_TRAMP(name, func)	__PPC_SCT(name, "b " #func)
+#define ARCH_DEFINE_STATIC_CALL_NULL_TRAMP(name)	__PPC_SCT(name, "blr")
+
+#endif /* _ASM_POWERPC_STATIC_CALL_H */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 7be36c1e1db6..0e3640e14eb1 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -106,7 +106,7 @@ extra-y				+= vmlinux.lds
 
 obj-$(CONFIG_RELOCATABLE)	+= reloc_$(BITS).o
 
-obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o early_32.o
+obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o early_32.o static_call.o
 obj-$(CONFIG_PPC64)		+= dma-iommu.o iommu.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
diff --git a/arch/powerpc/kernel/static_call.c b/arch/powerpc/kernel/static_call.c
new file mode 100644
index 000000000000..863a7aa24650
--- /dev/null
+++ b/arch/powerpc/kernel/static_call.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/memory.h>
+#include <linux/static_call.h>
+
+#include <asm/code-patching.h>
+
+void arch_static_call_transform(void *site, void *tramp, void *func, bool tail)
+{
+	int err;
+	bool is_ret0 = (func == __static_call_return0);
+	unsigned long target = (unsigned long)(is_ret0 ? tramp + PPC_SCT_RET0 : func);
+	bool is_short = is_offset_in_branch_range((long)target - (long)tramp);
+
+	if (!tramp)
+		return;
+
+	mutex_lock(&text_mutex);
+
+	if (func && !is_short) {
+		err = patch_instruction(tramp + PPC_SCT_DATA, ppc_inst(target));
+		if (err)
+			goto out;
+	}
+
+	if (!func)
+		err = patch_instruction(tramp, ppc_inst(PPC_RAW_BLR()));
+	else if (is_short)
+		err = patch_branch(tramp, target, 0);
+	else
+		err = patch_instruction(tramp, ppc_inst(PPC_RAW_NOP()));
+out:
+	mutex_unlock(&text_mutex);
+
+	if (err)
+		panic("%s: patching failed %pS at %pS\n", __func__, func, tramp);
+}
+EXPORT_SYMBOL_GPL(arch_static_call_transform);
-- 
2.25.0

Re: [PATCH v3] powerpc/32: Add support for out-of-line static calls

[Peter Zijlstra]

On Wed, Sep 01, 2021 at 08:30:21AM +0000, Christophe Leroy wrote:
> Add support for out-of-line static calls on PPC32. This change
> improve performance of calls to global function pointers by
> using direct calls instead of indirect calls.
> 
> The trampoline is initialy populated with a 'blr' or branch to target,
> followed by an unreachable long jump sequence.
> 
> In order to cater with parallele execution, the trampoline needs to
> be updated in a way that ensures it remains consistent at all time.
> This means we can't use the traditional lis/addi to load r12 with
> the target address, otherwise there would be a window during which
> the first instruction contains the upper part of the new target
> address while the second instruction still contains the lower part of
> the old target address. To avoid that the target address is stored
> just after the 'bctr' and loaded from there with a single instruction.
> 
> Then, depending on the target distance, arch_static_call_transform()
> will either replace the first instruction by a direct 'bl <target>' or
> 'nop' in order to have the trampoline fall through the long jump
> sequence.
> 
> For the special case of __static_call_return0(), to avoid the risk of
> a far branch, a version of it is inlined at the end of the trampoline.

(also, it's in the same line, so it avoids another cachemiss and it
nicely fills the hole you had in your 32byte chunk)

> Performancewise the long jump sequence is probably not better than
> the indirect calls set by GCC when we don't use static calls, but
> such calls are unlikely to be required on powerpc32: With most
> configurations the kernel size is far below 32 Mbytes so only
> modules may happen to be too far. And even modules are likely to
> be close enough as they are allocated below the kernel core and
> as close as possible of the kernel text.
> 
> static_call selftest is running successfully with this change.

Nice!, I'd ask if you'd tried PREEMPT_DYNAMIC, since that should really
stress the thing, but I see that also requires GENERIC_ENTRY and you
don't have that. Alas.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>

Re: [PATCH v3] powerpc/32: Add support for out-of-line static calls

[Peter Zijlstra]

On Wed, Sep 01, 2021 at 08:30:21AM +0000, Christophe Leroy wrote:
> Add support for out-of-line static calls on PPC32. This change
> improve performance of calls to global function pointers by
> using direct calls instead of indirect calls.
> 
> The trampoline is initialy populated with a 'blr' or branch to target,
> followed by an unreachable long jump sequence.
> 
> In order to cater with parallele execution, the trampoline needs to
> be updated in a way that ensures it remains consistent at all time.
> This means we can't use the traditional lis/addi to load r12 with
> the target address, otherwise there would be a window during which
> the first instruction contains the upper part of the new target
> address while the second instruction still contains the lower part of
> the old target address. To avoid that the target address is stored
> just after the 'bctr' and loaded from there with a single instruction.
> 
> Then, depending on the target distance, arch_static_call_transform()
> will either replace the first instruction by a direct 'bl <target>' or
> 'nop' in order to have the trampoline fall through the long jump
> sequence.
> 
> For the special case of __static_call_return0(), to avoid the risk of
> a far branch, a version of it is inlined at the end of the trampoline.

(also, it's in the same line, so it avoids another cachemiss and it
nicely fills the hole you had in your 32byte chunk)

> Performancewise the long jump sequence is probably not better than
> the indirect calls set by GCC when we don't use static calls, but
> such calls are unlikely to be required on powerpc32: With most
> configurations the kernel size is far below 32 Mbytes so only
> modules may happen to be too far. And even modules are likely to
> be close enough as they are allocated below the kernel core and
> as close as possible of the kernel text.
> 
> static_call selftest is running successfully with this change.

Nice!, I'd ask if you'd tried PREEMPT_DYNAMIC, since that should really
stress the thing, but I see that also requires GENERIC_ENTRY and you
don't have that. Alas.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>

Re: [PATCH v3] powerpc/32: Add support for out-of-line static calls

[Michael Ellerman]

On Wed, 1 Sep 2021 08:30:21 +0000 (UTC), Christophe Leroy wrote:
> Add support for out-of-line static calls on PPC32. This change
> improve performance of calls to global function pointers by
> using direct calls instead of indirect calls.
> 
> The trampoline is initialy populated with a 'blr' or branch to target,
> followed by an unreachable long jump sequence.
> 
> [...]

Applied to powerpc/next.

[1/1] powerpc/32: Add support for out-of-line static calls
      https://git.kernel.org/powerpc/c/5c810ced36ae1a8f1a7403c1635b0dc07c115086

cheers

Re: [PATCH v3] powerpc/32: Add support for out-of-line static calls

[Michael Ellerman]

On Wed, 1 Sep 2021 08:30:21 +0000 (UTC), Christophe Leroy wrote:
> Add support for out-of-line static calls on PPC32. This change
> improve performance of calls to global function pointers by
> using direct calls instead of indirect calls.
> 
> The trampoline is initialy populated with a 'blr' or branch to target,
> followed by an unreachable long jump sequence.
> 
> [...]

Applied to powerpc/next.

[1/1] powerpc/32: Add support for out-of-line static calls
      https://git.kernel.org/powerpc/c/5c810ced36ae1a8f1a7403c1635b0dc07c115086

cheers