All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Michael Ellerman <mpe@ellerman.id.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>,
	linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v1 11/15] powerpc/kuap: Wire-up KUAP on 44x
Date: Wed,  6 Oct 2021 14:43:44 +0200	[thread overview]
Message-ID: <6f7dfafe22d5d681135c7e66a39d860d3963b862.1633523837.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <cover.1633523837.git.christophe.leroy@csgroup.eu>

This adds KUAP support to 44x. This is done by checking
the content of SPRN_PID at the time it is read and written
into SPRN_MMUCR.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
 arch/powerpc/kernel/head_44x.S         | 16 ++++++++++++++++
 arch/powerpc/platforms/Kconfig.cputype |  1 +
 2 files changed, 17 insertions(+)

diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 02d2928d1e01..cf92a3434acd 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -334,6 +334,10 @@ interrupt_base:
 	mfspr	r12,SPRN_MMUCR
 	mfspr   r13,SPRN_PID		/* Get PID */
 	rlwimi	r12,r13,0,24,31		/* Set TID */
+#ifdef CONFIG_PPC_KUAP
+	cmpwi	r13,0
+	beq	2f			/* KUAP Fault */
+#endif
 
 4:
 	mtspr	SPRN_MMUCR,r12
@@ -444,6 +448,10 @@ interrupt_base:
 	mfspr	r12,SPRN_MMUCR
 	mfspr   r13,SPRN_PID		/* Get PID */
 	rlwimi	r12,r13,0,24,31		/* Set TID */
+#ifdef CONFIG_PPC_KUAP
+	cmpwi	r13,0
+	beq	2f			/* KUAP Fault */
+#endif
 
 4:
 	mtspr	SPRN_MMUCR,r12
@@ -575,6 +583,10 @@ finish_tlb_load_44x:
 3:	mfspr	r11,SPRN_SPRG3
 	lwz	r11,PGDIR(r11)
 	mfspr   r12,SPRN_PID		/* Get PID */
+#ifdef CONFIG_PPC_KUAP
+	cmpwi	r12,0
+	beq	2f			/* KUAP Fault */
+#endif
 4:	mtspr	SPRN_MMUCR,r12		/* Set MMUCR */
 
 	/* Mask of required permission bits. Note that while we
@@ -672,6 +684,10 @@ finish_tlb_load_44x:
 3:	mfspr	r11,SPRN_SPRG_THREAD
 	lwz	r11,PGDIR(r11)
 	mfspr   r12,SPRN_PID		/* Get PID */
+#ifdef CONFIG_PPC_KUAP
+	cmpwi	r12,0
+	beq	2f			/* KUAP Fault */
+#endif
 4:	mtspr	SPRN_MMUCR,r12		/* Set MMUCR */
 
 	/* Make up the required permissions */
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index dce1cf31047b..74e5887abbce 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -62,6 +62,7 @@ config 44x
 	select HAVE_PCI
 	select PHYS_64BIT
 	select PPC_HAVE_KUEP
+	select PPC_HAVE_KUAP
 
 endchoice
 
-- 
2.31.1


WARNING: multiple messages have this Message-ID (diff)
From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 11/15] powerpc/kuap: Wire-up KUAP on 44x
Date: Wed,  6 Oct 2021 14:43:44 +0200	[thread overview]
Message-ID: <6f7dfafe22d5d681135c7e66a39d860d3963b862.1633523837.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <cover.1633523837.git.christophe.leroy@csgroup.eu>

This adds KUAP support to 44x. This is done by checking
the content of SPRN_PID at the time it is read and written
into SPRN_MMUCR.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
 arch/powerpc/kernel/head_44x.S         | 16 ++++++++++++++++
 arch/powerpc/platforms/Kconfig.cputype |  1 +
 2 files changed, 17 insertions(+)

diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 02d2928d1e01..cf92a3434acd 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -334,6 +334,10 @@ interrupt_base:
 	mfspr	r12,SPRN_MMUCR
 	mfspr   r13,SPRN_PID		/* Get PID */
 	rlwimi	r12,r13,0,24,31		/* Set TID */
+#ifdef CONFIG_PPC_KUAP
+	cmpwi	r13,0
+	beq	2f			/* KUAP Fault */
+#endif
 
 4:
 	mtspr	SPRN_MMUCR,r12
@@ -444,6 +448,10 @@ interrupt_base:
 	mfspr	r12,SPRN_MMUCR
 	mfspr   r13,SPRN_PID		/* Get PID */
 	rlwimi	r12,r13,0,24,31		/* Set TID */
+#ifdef CONFIG_PPC_KUAP
+	cmpwi	r13,0
+	beq	2f			/* KUAP Fault */
+#endif
 
 4:
 	mtspr	SPRN_MMUCR,r12
@@ -575,6 +583,10 @@ finish_tlb_load_44x:
 3:	mfspr	r11,SPRN_SPRG3
 	lwz	r11,PGDIR(r11)
 	mfspr   r12,SPRN_PID		/* Get PID */
+#ifdef CONFIG_PPC_KUAP
+	cmpwi	r12,0
+	beq	2f			/* KUAP Fault */
+#endif
 4:	mtspr	SPRN_MMUCR,r12		/* Set MMUCR */
 
 	/* Mask of required permission bits. Note that while we
@@ -672,6 +684,10 @@ finish_tlb_load_44x:
 3:	mfspr	r11,SPRN_SPRG_THREAD
 	lwz	r11,PGDIR(r11)
 	mfspr   r12,SPRN_PID		/* Get PID */
+#ifdef CONFIG_PPC_KUAP
+	cmpwi	r12,0
+	beq	2f			/* KUAP Fault */
+#endif
 4:	mtspr	SPRN_MMUCR,r12		/* Set MMUCR */
 
 	/* Make up the required permissions */
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index dce1cf31047b..74e5887abbce 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -62,6 +62,7 @@ config 44x
 	select HAVE_PCI
 	select PHYS_64BIT
 	select PPC_HAVE_KUEP
+	select PPC_HAVE_KUAP
 
 endchoice
 
-- 
2.31.1


  parent reply	other threads:[~2021-10-06 12:49 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-06 12:43 [PATCH v1 00/15] powerpc: Add KUAP support for BOOKE and 40x Christophe Leroy
2021-10-06 12:43 ` Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 01/15] powerpc/32s: Do kuep_lock() and kuep_unlock() in assembly Christophe Leroy
2021-10-06 12:43   ` Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 02/15] powerpc/32s: Save content of sr0 to avoid 'mfsr' Christophe Leroy
2021-10-06 12:43   ` Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 03/15] powerpc/kuap: Add a generic intermediate layer Christophe Leroy
2021-10-06 12:43   ` Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 04/15] powerpc/kuap: Check KUAP activation in generic functions Christophe Leroy
2021-10-06 12:43   ` Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 05/15] powerpc/kuap: Remove __kuap_assert_locked() Christophe Leroy
2021-10-06 12:43   ` Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 06/15] powerpc/kuap: Add kuap_lock() Christophe Leroy
2021-10-06 12:43   ` Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 07/15] powerpc/nohash: Move setup_kuap out of 8xx.c Christophe Leroy
2021-10-06 12:43   ` Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 08/15] powerpc/config: Add CONFIG_BOOKE_OR_40x Christophe Leroy
2021-10-06 12:43   ` Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 09/15] powerpc/kuap: Prepare for supporting KUAP on BOOK3E/64 Christophe Leroy
2021-10-06 12:43   ` Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 10/15] powerpc: Add KUAP support for BOOKE and 40x Christophe Leroy
2021-10-06 12:43   ` Christophe Leroy
2021-10-06 12:43 ` Christophe Leroy [this message]
2021-10-06 12:43   ` [PATCH v1 11/15] powerpc/kuap: Wire-up KUAP on 44x Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 12/15] powerpc/kuap: Wire-up KUAP on 40x Christophe Leroy
2021-10-06 12:43   ` Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 13/15] powerpc/kuap: Wire-up KUAP on 85xx in 32 bits mode Christophe Leroy
2021-10-06 12:43   ` Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 14/15] powerpc/kuap: Wire-up KUAP on book3e/64 Christophe Leroy
2021-10-06 12:43   ` Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 15/15] powerpc: Remove CONFIG_PPC_HAVE_KUAP Christophe Leroy
2021-10-06 12:43   ` Christophe Leroy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6f7dfafe22d5d681135c7e66a39d860d3963b862.1633523837.git.christophe.leroy@csgroup.eu \
    --to=christophe.leroy@csgroup.eu \
    --cc=benh@kernel.crashing.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.