Re: [PATCH v3 0/3] arm64: meson-sm1: add support for the SM1 based VIM3L

[Neil Armstrong <narmstrong@baylibre.com>]

On 28/08/2019 19:55, Kevin Hilman wrote:
> Neil Armstrong <narmstrong@baylibre.com> writes:
> 
>> This patchset adds support for the Amlogic SM1 based Khadas VIM3L variant.
>>
>> The S903D3 package variant of SM1 is pin-to-pin compatible with the
>> S922X and A311d, so only internal DT changes are needed :
>> - DVFS support is different
>> - Audio support not yet available for SM1
>>
>> This patchset moved all the non-g12b nodes to meson-khadas-vim3.dtsi
>> and add the sm1 specific nodes into meson-sm1-khadas-vim3l.dts.
> 
> Reviewed-by: Kevin Hilman <khilman@baylibre.com>
> Tested-by: Kevin Hilman <khilman@baylibre.com>
> 
> Basic boot test + suspend/resume test OK on my vim3L (thanks to Khadas
> for the board!)
> 
>> Display has a color conversion bug on SM1 by using a more recent vendor
>> bootloader on the SM1 based VIM3, this is out of scope of this patchset
>> and will be fixed in the drm/meson driver.
>>
>> Dependencies:
>> - patch 1,2: None
>> - patch 3: Depends on the "arm64: meson-sm1: add support for DVFS" patchset at [1]
> 
> I tested in my integ branch where this series is applied, but I'm not
> seeing any OPPs created (/sys/devices/system/cpu/cpufreq/)

These patches were sent from your integ branch, on top of :
commit 395df5af4c782ad19fb34b9a2009ca240eeb9749 (khilman-amlogic/v5.4/integ)
Merge: 2fcc5666dd45 9557737987bb
Author: Kevin Hilman <khilman@baylibre.com>
Date:   Tue Aug 27 15:39:46 2019 -0700

    Merge branch 'v5.4/testing' into tmp/aml-rebuild

Rebuilt and retested, and I get the OPPs just fine :
# cat /sys/bus/cpu/devices/cpu0/cpufreq/scaling_available_frequencies
100000 250000 500000 666666 1000000 1200000 1404000 1500000 1608000 1704000 1800000 1908000

Here is the boot log:
https://pastebin.com/LY21gU9E

and .config:
https://termbin.com/1s5g

Neil

> 
> Kevin
>