From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Arnd Bergmann <arnd@arndb.de>,
Boris BREZILLON <boris.brezillon@free-electrons.com>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>,
Ludovic Desroches <ludovic.desroches@atmel.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, Olof Johansson <olof@lixom.net>,
<arm@kernel.org>, Nicolas Ferre <nicolas.ferre@atmel.com>
Subject: [PATCH 7/8] pinctrl: at91: add registers definitions directly into driver
Date: Tue, 2 Dec 2014 18:27:27 +0100 [thread overview]
Message-ID: <720f350230a76bb5df0beed7b9a1b7cfd01ab158.1417541118.git.nicolas.ferre@atmel.com> (raw)
In-Reply-To: <e093d7cf37ec9ff24b0631b0a2e405a7cf7574db.1417541118.git.nicolas.ferre@atmel.com>
As the old gpio.c driver is gone, we can merge the registers definitions with
the pinctrl driver.
This also allows us to empty the AT91 include/mach directory.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
---
arch/arm/mach-at91/include/mach/at91_pio.h | 80 ------------------------------
drivers/pinctrl/pinctrl-at91.c | 65 ++++++++++++++++++++++--
2 files changed, 62 insertions(+), 83 deletions(-)
delete mode 100644 arch/arm/mach-at91/include/mach/at91_pio.h
diff --git a/arch/arm/mach-at91/include/mach/at91_pio.h b/arch/arm/mach-at91/include/mach/at91_pio.h
deleted file mode 100644
index 7b7366253ceb..000000000000
--- a/arch/arm/mach-at91/include/mach/at91_pio.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_pio.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Parallel I/O Controller (PIO) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PIO_H
-#define AT91_PIO_H
-
-#define PIO_PER 0x00 /* Enable Register */
-#define PIO_PDR 0x04 /* Disable Register */
-#define PIO_PSR 0x08 /* Status Register */
-#define PIO_OER 0x10 /* Output Enable Register */
-#define PIO_ODR 0x14 /* Output Disable Register */
-#define PIO_OSR 0x18 /* Output Status Register */
-#define PIO_IFER 0x20 /* Glitch Input Filter Enable */
-#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */
-#define PIO_IFSR 0x28 /* Glitch Input Filter Status */
-#define PIO_SODR 0x30 /* Set Output Data Register */
-#define PIO_CODR 0x34 /* Clear Output Data Register */
-#define PIO_ODSR 0x38 /* Output Data Status Register */
-#define PIO_PDSR 0x3c /* Pin Data Status Register */
-#define PIO_IER 0x40 /* Interrupt Enable Register */
-#define PIO_IDR 0x44 /* Interrupt Disable Register */
-#define PIO_IMR 0x48 /* Interrupt Mask Register */
-#define PIO_ISR 0x4c /* Interrupt Status Register */
-#define PIO_MDER 0x50 /* Multi-driver Enable Register */
-#define PIO_MDDR 0x54 /* Multi-driver Disable Register */
-#define PIO_MDSR 0x58 /* Multi-driver Status Register */
-#define PIO_PUDR 0x60 /* Pull-up Disable Register */
-#define PIO_PUER 0x64 /* Pull-up Enable Register */
-#define PIO_PUSR 0x68 /* Pull-up Status Register */
-#define PIO_ASR 0x70 /* Peripheral A Select Register */
-#define PIO_ABCDSR1 0x70 /* Peripheral ABCD Select Register 1 [some sam9 only] */
-#define PIO_BSR 0x74 /* Peripheral B Select Register */
-#define PIO_ABCDSR2 0x74 /* Peripheral ABCD Select Register 2 [some sam9 only] */
-#define PIO_ABSR 0x78 /* AB Status Register */
-#define PIO_IFSCDR 0x80 /* Input Filter Slow Clock Disable Register */
-#define PIO_IFSCER 0x84 /* Input Filter Slow Clock Enable Register */
-#define PIO_IFSCSR 0x88 /* Input Filter Slow Clock Status Register */
-#define PIO_SCDR 0x8c /* Slow Clock Divider Debouncing Register */
-#define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */
-#define PIO_PPDDR 0x90 /* Pad Pull-down Disable Register */
-#define PIO_PPDER 0x94 /* Pad Pull-down Enable Register */
-#define PIO_PPDSR 0x98 /* Pad Pull-down Status Register */
-#define PIO_OWER 0xa0 /* Output Write Enable Register */
-#define PIO_OWDR 0xa4 /* Output Write Disable Register */
-#define PIO_OWSR 0xa8 /* Output Write Status Register */
-#define PIO_AIMER 0xb0 /* Additional Interrupt Modes Enable Register */
-#define PIO_AIMDR 0xb4 /* Additional Interrupt Modes Disable Register */
-#define PIO_AIMMR 0xb8 /* Additional Interrupt Modes Mask Register */
-#define PIO_ESR 0xc0 /* Edge Select Register */
-#define PIO_LSR 0xc4 /* Level Select Register */
-#define PIO_ELSR 0xc8 /* Edge/Level Status Register */
-#define PIO_FELLSR 0xd0 /* Falling Edge/Low Level Select Register */
-#define PIO_REHLSR 0xd4 /* Rising Edge/ High Level Select Register */
-#define PIO_FRLHSR 0xd8 /* Fall/Rise - Low/High Status Register */
-#define PIO_SCHMITT 0x100 /* Schmitt Trigger Register */
-
-#define ABCDSR_PERIPH_A 0x0
-#define ABCDSR_PERIPH_B 0x1
-#define ABCDSR_PERIPH_C 0x2
-#define ABCDSR_PERIPH_D 0x3
-
-#define SAMA5D3_PIO_DRIVER1 0x118 /*PIO Driver 1 register offset*/
-#define SAMA5D3_PIO_DRIVER2 0x11C /*PIO Driver 2 register offset*/
-
-#define AT91SAM9X5_PIO_DRIVER1 0x114 /*PIO Driver 1 register offset*/
-#define AT91SAM9X5_PIO_DRIVER2 0x118 /*PIO Driver 2 register offset*/
-
-#endif
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 354a81d40925..47d755861b5a 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -25,11 +25,70 @@
/* Since we request GPIOs from ourself */
#include <linux/pinctrl/consumer.h>
-#include <mach/hardware.h>
-#include <mach/at91_pio.h>
-
#include "core.h"
+/* PIO register definitions */
+#define PIO_PER 0x00 /* Enable Register */
+#define PIO_PDR 0x04 /* Disable Register */
+#define PIO_PSR 0x08 /* Status Register */
+#define PIO_OER 0x10 /* Output Enable Register */
+#define PIO_ODR 0x14 /* Output Disable Register */
+#define PIO_OSR 0x18 /* Output Status Register */
+#define PIO_IFER 0x20 /* Glitch Input Filter Enable */
+#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */
+#define PIO_IFSR 0x28 /* Glitch Input Filter Status */
+#define PIO_SODR 0x30 /* Set Output Data Register */
+#define PIO_CODR 0x34 /* Clear Output Data Register */
+#define PIO_ODSR 0x38 /* Output Data Status Register */
+#define PIO_PDSR 0x3c /* Pin Data Status Register */
+#define PIO_IER 0x40 /* Interrupt Enable Register */
+#define PIO_IDR 0x44 /* Interrupt Disable Register */
+#define PIO_IMR 0x48 /* Interrupt Mask Register */
+#define PIO_ISR 0x4c /* Interrupt Status Register */
+#define PIO_MDER 0x50 /* Multi-driver Enable Register */
+#define PIO_MDDR 0x54 /* Multi-driver Disable Register */
+#define PIO_MDSR 0x58 /* Multi-driver Status Register */
+#define PIO_PUDR 0x60 /* Pull-up Disable Register */
+#define PIO_PUER 0x64 /* Pull-up Enable Register */
+#define PIO_PUSR 0x68 /* Pull-up Status Register */
+#define PIO_ASR 0x70 /* Peripheral A Select Register */
+#define PIO_ABCDSR1 0x70 /* Peripheral ABCD Select Register 1 [some SoCs only] */
+#define PIO_BSR 0x74 /* Peripheral B Select Register */
+#define PIO_ABCDSR2 0x74 /* Peripheral ABCD Select Register 2 [some SoCs only] */
+#define PIO_ABSR 0x78 /* AB Status Register */
+#define PIO_IFSCDR 0x80 /* Input Filter Slow Clock Disable Register */
+#define PIO_IFSCER 0x84 /* Input Filter Slow Clock Enable Register */
+#define PIO_IFSCSR 0x88 /* Input Filter Slow Clock Status Register */
+#define PIO_SCDR 0x8c /* Slow Clock Divider Debouncing Register */
+#define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */
+#define PIO_PPDDR 0x90 /* Pad Pull-down Disable Register */
+#define PIO_PPDER 0x94 /* Pad Pull-down Enable Register */
+#define PIO_PPDSR 0x98 /* Pad Pull-down Status Register */
+#define PIO_OWER 0xa0 /* Output Write Enable Register */
+#define PIO_OWDR 0xa4 /* Output Write Disable Register */
+#define PIO_OWSR 0xa8 /* Output Write Status Register */
+#define PIO_AIMER 0xb0 /* Additional Interrupt Modes Enable Register */
+#define PIO_AIMDR 0xb4 /* Additional Interrupt Modes Disable Register */
+#define PIO_AIMMR 0xb8 /* Additional Interrupt Modes Mask Register */
+#define PIO_ESR 0xc0 /* Edge Select Register */
+#define PIO_LSR 0xc4 /* Level Select Register */
+#define PIO_ELSR 0xc8 /* Edge/Level Status Register */
+#define PIO_FELLSR 0xd0 /* Falling Edge/Low Level Select Register */
+#define PIO_REHLSR 0xd4 /* Rising Edge/ High Level Select Register */
+#define PIO_FRLHSR 0xd8 /* Fall/Rise - Low/High Status Register */
+#define PIO_SCHMITT 0x100 /* Schmitt Trigger Register */
+
+#define ABCDSR_PERIPH_A 0x0
+#define ABCDSR_PERIPH_B 0x1
+#define ABCDSR_PERIPH_C 0x2
+#define ABCDSR_PERIPH_D 0x3
+
+#define SAMA5D3_PIO_DRIVER1 0x118 /*PIO Driver 1 register offset*/
+#define SAMA5D3_PIO_DRIVER2 0x11C /*PIO Driver 2 register offset*/
+
+#define AT91SAM9X5_PIO_DRIVER1 0x114 /*PIO Driver 1 register offset*/
+#define AT91SAM9X5_PIO_DRIVER2 0x118 /*PIO Driver 2 register offset*/
+
#define MAX_GPIO_BANKS 5
#define MAX_NB_GPIO_PER_BANK 32
--
2.1.3
WARNING: multiple messages have this Message-ID (diff)
From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 7/8] pinctrl: at91: add registers definitions directly into driver
Date: Tue, 2 Dec 2014 18:27:27 +0100 [thread overview]
Message-ID: <720f350230a76bb5df0beed7b9a1b7cfd01ab158.1417541118.git.nicolas.ferre@atmel.com> (raw)
In-Reply-To: <e093d7cf37ec9ff24b0631b0a2e405a7cf7574db.1417541118.git.nicolas.ferre@atmel.com>
As the old gpio.c driver is gone, we can merge the registers definitions with
the pinctrl driver.
This also allows us to empty the AT91 include/mach directory.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
---
arch/arm/mach-at91/include/mach/at91_pio.h | 80 ------------------------------
drivers/pinctrl/pinctrl-at91.c | 65 ++++++++++++++++++++++--
2 files changed, 62 insertions(+), 83 deletions(-)
delete mode 100644 arch/arm/mach-at91/include/mach/at91_pio.h
diff --git a/arch/arm/mach-at91/include/mach/at91_pio.h b/arch/arm/mach-at91/include/mach/at91_pio.h
deleted file mode 100644
index 7b7366253ceb..000000000000
--- a/arch/arm/mach-at91/include/mach/at91_pio.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_pio.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Parallel I/O Controller (PIO) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PIO_H
-#define AT91_PIO_H
-
-#define PIO_PER 0x00 /* Enable Register */
-#define PIO_PDR 0x04 /* Disable Register */
-#define PIO_PSR 0x08 /* Status Register */
-#define PIO_OER 0x10 /* Output Enable Register */
-#define PIO_ODR 0x14 /* Output Disable Register */
-#define PIO_OSR 0x18 /* Output Status Register */
-#define PIO_IFER 0x20 /* Glitch Input Filter Enable */
-#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */
-#define PIO_IFSR 0x28 /* Glitch Input Filter Status */
-#define PIO_SODR 0x30 /* Set Output Data Register */
-#define PIO_CODR 0x34 /* Clear Output Data Register */
-#define PIO_ODSR 0x38 /* Output Data Status Register */
-#define PIO_PDSR 0x3c /* Pin Data Status Register */
-#define PIO_IER 0x40 /* Interrupt Enable Register */
-#define PIO_IDR 0x44 /* Interrupt Disable Register */
-#define PIO_IMR 0x48 /* Interrupt Mask Register */
-#define PIO_ISR 0x4c /* Interrupt Status Register */
-#define PIO_MDER 0x50 /* Multi-driver Enable Register */
-#define PIO_MDDR 0x54 /* Multi-driver Disable Register */
-#define PIO_MDSR 0x58 /* Multi-driver Status Register */
-#define PIO_PUDR 0x60 /* Pull-up Disable Register */
-#define PIO_PUER 0x64 /* Pull-up Enable Register */
-#define PIO_PUSR 0x68 /* Pull-up Status Register */
-#define PIO_ASR 0x70 /* Peripheral A Select Register */
-#define PIO_ABCDSR1 0x70 /* Peripheral ABCD Select Register 1 [some sam9 only] */
-#define PIO_BSR 0x74 /* Peripheral B Select Register */
-#define PIO_ABCDSR2 0x74 /* Peripheral ABCD Select Register 2 [some sam9 only] */
-#define PIO_ABSR 0x78 /* AB Status Register */
-#define PIO_IFSCDR 0x80 /* Input Filter Slow Clock Disable Register */
-#define PIO_IFSCER 0x84 /* Input Filter Slow Clock Enable Register */
-#define PIO_IFSCSR 0x88 /* Input Filter Slow Clock Status Register */
-#define PIO_SCDR 0x8c /* Slow Clock Divider Debouncing Register */
-#define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */
-#define PIO_PPDDR 0x90 /* Pad Pull-down Disable Register */
-#define PIO_PPDER 0x94 /* Pad Pull-down Enable Register */
-#define PIO_PPDSR 0x98 /* Pad Pull-down Status Register */
-#define PIO_OWER 0xa0 /* Output Write Enable Register */
-#define PIO_OWDR 0xa4 /* Output Write Disable Register */
-#define PIO_OWSR 0xa8 /* Output Write Status Register */
-#define PIO_AIMER 0xb0 /* Additional Interrupt Modes Enable Register */
-#define PIO_AIMDR 0xb4 /* Additional Interrupt Modes Disable Register */
-#define PIO_AIMMR 0xb8 /* Additional Interrupt Modes Mask Register */
-#define PIO_ESR 0xc0 /* Edge Select Register */
-#define PIO_LSR 0xc4 /* Level Select Register */
-#define PIO_ELSR 0xc8 /* Edge/Level Status Register */
-#define PIO_FELLSR 0xd0 /* Falling Edge/Low Level Select Register */
-#define PIO_REHLSR 0xd4 /* Rising Edge/ High Level Select Register */
-#define PIO_FRLHSR 0xd8 /* Fall/Rise - Low/High Status Register */
-#define PIO_SCHMITT 0x100 /* Schmitt Trigger Register */
-
-#define ABCDSR_PERIPH_A 0x0
-#define ABCDSR_PERIPH_B 0x1
-#define ABCDSR_PERIPH_C 0x2
-#define ABCDSR_PERIPH_D 0x3
-
-#define SAMA5D3_PIO_DRIVER1 0x118 /*PIO Driver 1 register offset*/
-#define SAMA5D3_PIO_DRIVER2 0x11C /*PIO Driver 2 register offset*/
-
-#define AT91SAM9X5_PIO_DRIVER1 0x114 /*PIO Driver 1 register offset*/
-#define AT91SAM9X5_PIO_DRIVER2 0x118 /*PIO Driver 2 register offset*/
-
-#endif
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 354a81d40925..47d755861b5a 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -25,11 +25,70 @@
/* Since we request GPIOs from ourself */
#include <linux/pinctrl/consumer.h>
-#include <mach/hardware.h>
-#include <mach/at91_pio.h>
-
#include "core.h"
+/* PIO register definitions */
+#define PIO_PER 0x00 /* Enable Register */
+#define PIO_PDR 0x04 /* Disable Register */
+#define PIO_PSR 0x08 /* Status Register */
+#define PIO_OER 0x10 /* Output Enable Register */
+#define PIO_ODR 0x14 /* Output Disable Register */
+#define PIO_OSR 0x18 /* Output Status Register */
+#define PIO_IFER 0x20 /* Glitch Input Filter Enable */
+#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */
+#define PIO_IFSR 0x28 /* Glitch Input Filter Status */
+#define PIO_SODR 0x30 /* Set Output Data Register */
+#define PIO_CODR 0x34 /* Clear Output Data Register */
+#define PIO_ODSR 0x38 /* Output Data Status Register */
+#define PIO_PDSR 0x3c /* Pin Data Status Register */
+#define PIO_IER 0x40 /* Interrupt Enable Register */
+#define PIO_IDR 0x44 /* Interrupt Disable Register */
+#define PIO_IMR 0x48 /* Interrupt Mask Register */
+#define PIO_ISR 0x4c /* Interrupt Status Register */
+#define PIO_MDER 0x50 /* Multi-driver Enable Register */
+#define PIO_MDDR 0x54 /* Multi-driver Disable Register */
+#define PIO_MDSR 0x58 /* Multi-driver Status Register */
+#define PIO_PUDR 0x60 /* Pull-up Disable Register */
+#define PIO_PUER 0x64 /* Pull-up Enable Register */
+#define PIO_PUSR 0x68 /* Pull-up Status Register */
+#define PIO_ASR 0x70 /* Peripheral A Select Register */
+#define PIO_ABCDSR1 0x70 /* Peripheral ABCD Select Register 1 [some SoCs only] */
+#define PIO_BSR 0x74 /* Peripheral B Select Register */
+#define PIO_ABCDSR2 0x74 /* Peripheral ABCD Select Register 2 [some SoCs only] */
+#define PIO_ABSR 0x78 /* AB Status Register */
+#define PIO_IFSCDR 0x80 /* Input Filter Slow Clock Disable Register */
+#define PIO_IFSCER 0x84 /* Input Filter Slow Clock Enable Register */
+#define PIO_IFSCSR 0x88 /* Input Filter Slow Clock Status Register */
+#define PIO_SCDR 0x8c /* Slow Clock Divider Debouncing Register */
+#define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */
+#define PIO_PPDDR 0x90 /* Pad Pull-down Disable Register */
+#define PIO_PPDER 0x94 /* Pad Pull-down Enable Register */
+#define PIO_PPDSR 0x98 /* Pad Pull-down Status Register */
+#define PIO_OWER 0xa0 /* Output Write Enable Register */
+#define PIO_OWDR 0xa4 /* Output Write Disable Register */
+#define PIO_OWSR 0xa8 /* Output Write Status Register */
+#define PIO_AIMER 0xb0 /* Additional Interrupt Modes Enable Register */
+#define PIO_AIMDR 0xb4 /* Additional Interrupt Modes Disable Register */
+#define PIO_AIMMR 0xb8 /* Additional Interrupt Modes Mask Register */
+#define PIO_ESR 0xc0 /* Edge Select Register */
+#define PIO_LSR 0xc4 /* Level Select Register */
+#define PIO_ELSR 0xc8 /* Edge/Level Status Register */
+#define PIO_FELLSR 0xd0 /* Falling Edge/Low Level Select Register */
+#define PIO_REHLSR 0xd4 /* Rising Edge/ High Level Select Register */
+#define PIO_FRLHSR 0xd8 /* Fall/Rise - Low/High Status Register */
+#define PIO_SCHMITT 0x100 /* Schmitt Trigger Register */
+
+#define ABCDSR_PERIPH_A 0x0
+#define ABCDSR_PERIPH_B 0x1
+#define ABCDSR_PERIPH_C 0x2
+#define ABCDSR_PERIPH_D 0x3
+
+#define SAMA5D3_PIO_DRIVER1 0x118 /*PIO Driver 1 register offset*/
+#define SAMA5D3_PIO_DRIVER2 0x11C /*PIO Driver 2 register offset*/
+
+#define AT91SAM9X5_PIO_DRIVER1 0x114 /*PIO Driver 1 register offset*/
+#define AT91SAM9X5_PIO_DRIVER2 0x118 /*PIO Driver 2 register offset*/
+
#define MAX_GPIO_BANKS 5
#define MAX_NB_GPIO_PER_BANK 32
--
2.1.3
next prev parent reply other threads:[~2014-12-02 17:28 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-28 12:10 [GIT PULL] at91: cleanup for 3.19 #4 Nicolas Ferre
2014-11-28 12:10 ` Nicolas Ferre
2014-11-28 20:52 ` Arnd Bergmann
2014-11-28 20:52 ` Arnd Bergmann
2014-12-01 16:15 ` Nicolas Ferre
2014-12-01 16:15 ` Nicolas Ferre
2014-12-02 17:27 ` [PATCH 1/8] ARM: at91/Kconfig: select board files automatically Nicolas Ferre
2014-12-02 17:27 ` Nicolas Ferre
2014-12-02 17:27 ` [PATCH 2/8] ARM: at91: cleanup initilisation code by removing dead code Nicolas Ferre
2014-12-02 17:27 ` Nicolas Ferre
2014-12-02 17:27 ` [PATCH 3/8] ARM: at91: remove old AT91-specific drivers Nicolas Ferre
2014-12-02 17:27 ` Nicolas Ferre
2014-12-02 17:27 ` [PATCH 4/8] ARM: at91: at91rm9200 ST initialization is now DT only Nicolas Ferre
2014-12-02 17:27 ` Nicolas Ferre
2014-12-02 17:27 ` [PATCH 5/8] ARM: at91/clocksource: remove !DT PIT initializations Nicolas Ferre
2014-12-02 17:27 ` Nicolas Ferre
2014-12-03 13:01 ` Maxime Ripard
2014-12-03 13:01 ` Maxime Ripard
2014-12-03 16:31 ` Nicolas Ferre
2014-12-03 16:31 ` Nicolas Ferre
2014-12-02 17:27 ` [PATCH 6/8] ARM: at91: remove unneeded header files Nicolas Ferre
2014-12-02 17:27 ` Nicolas Ferre
2014-12-02 17:27 ` Nicolas Ferre [this message]
2014-12-02 17:27 ` [PATCH 7/8] pinctrl: at91: add registers definitions directly into driver Nicolas Ferre
2014-12-03 9:53 ` Nicolas Ferre
2014-12-03 9:53 ` Nicolas Ferre
2014-12-02 17:27 ` [PATCH 8/8] ARM: at91: remove unused board.h file Nicolas Ferre
2014-12-02 17:27 ` Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=720f350230a76bb5df0beed7b9a1b7cfd01ab158.1417541118.git.nicolas.ferre@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=boris.brezillon@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.desroches@atmel.com \
--cc=olof@lixom.net \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.