[U-Boot] [RESEND PATCH v2] bcm2835_sdhci: Add SDHCI_QUIRK_NO_HISPD_BIT flag

[U-Boot] [RESEND PATCH v2] bcm2835_sdhci: Add SDHCI_QUIRK_NO_HISPD_BIT flag

[Lubomir Rintel]

Seems like the controller doesn't support the flag. None of the hi-speed cards
I've tried could be read, while they successfully worked with the quirk enabled.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
---
Changes to v2:
    - I've sent the first version with extra and irrelevant hunk.
      Sorry.

 drivers/mmc/bcm2835_sdhci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c
index 54cfabf..82079d6 100644
--- a/drivers/mmc/bcm2835_sdhci.c
+++ b/drivers/mmc/bcm2835_sdhci.c
@@ -179,7 +179,7 @@ int bcm2835_sdhci_init(u32 regbase, u32 emmc_freq)
 	host->name = "bcm2835_sdhci";
 	host->ioaddr = (void *)regbase;
 	host->quirks = SDHCI_QUIRK_BROKEN_VOLTAGE | SDHCI_QUIRK_BROKEN_R1B |
-		SDHCI_QUIRK_WAIT_SEND_CMD;
+		SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_NO_HISPD_BIT;
 	host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
 	host->ops = &bcm2835_ops;
 
-- 
1.8.3.1

[U-Boot] [RESEND PATCH v2] bcm2835_sdhci: Add SDHCI_QUIRK_NO_HISPD_BIT flag

[Pantelis Antoniou]

Hi Lubomir,

On Jul 17, 2014, at 2:57 PM, Lubomir Rintel wrote:

> Seems like the controller doesn't support the flag. None of the hi-speed cards
> I've tried could be read, while they successfully worked with the quirk enabled.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> Tested-by: Stephen Warren <swarren@wwwdotorg.org>
> ---
> Changes to v2:
>    - I've sent the first version with extra and irrelevant hunk.
>      Sorry.
> 
> drivers/mmc/bcm2835_sdhci.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c
> index 54cfabf..82079d6 100644
> --- a/drivers/mmc/bcm2835_sdhci.c
> +++ b/drivers/mmc/bcm2835_sdhci.c
> @@ -179,7 +179,7 @@ int bcm2835_sdhci_init(u32 regbase, u32 emmc_freq)
> 	host->name = "bcm2835_sdhci";
> 	host->ioaddr = (void *)regbase;
> 	host->quirks = SDHCI_QUIRK_BROKEN_VOLTAGE | SDHCI_QUIRK_BROKEN_R1B |
> -		SDHCI_QUIRK_WAIT_SEND_CMD;
> +		SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_NO_HISPD_BIT;
> 	host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
> 	host->ops = &bcm2835_ops;
> 
> -- 
> 1.8.3.1
> 

Thanks,

Applied.