* [PATCH 0/9] staging: sm750: Fix most style errors
@ 2015-03-12 1:23 Ioana Ciornei
2015-03-12 1:23 ` [PATCH 1/9] staging: sm750: Place space before after control flow instructions Ioana Ciornei
` (8 more replies)
0 siblings, 9 replies; 14+ messages in thread
From: Ioana Ciornei @ 2015-03-12 1:23 UTC (permalink / raw)
To: outreachy-kernel; +Cc: Ioana Ciornei
This patchset cleans up multiple style errors found using checkpatch.pl
in order to improve readability and code quality.
Ioana Ciornei (9):
staging: sm750: Place space before after control flow instructions
staging: sm750: Add space before open bracket '{'
staging: sm750: Place space before and after curly brackets
staging: sm750: Remove space before semicolon
staging: sm750: Place open bracket '{' on the next line
staging: sm750: Move open curly bracket on previous line
staging: sm750: Remove space before ')'
staging: sm750: Place * next to identifier
staging: sm750: Add space before and after '=', ':' etc
drivers/staging/sm750fb/sm750.c | 256 +++++++++++++++++++---------------------
1 file changed, 122 insertions(+), 134 deletions(-)
--
1.9.1
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 1/9] staging: sm750: Place space before after control flow instructions
2015-03-12 1:23 [PATCH 0/9] staging: sm750: Fix most style errors Ioana Ciornei
@ 2015-03-12 1:23 ` Ioana Ciornei
2015-03-12 1:23 ` [PATCH 2/9] staging: sm750: Add space before open bracket '{' Ioana Ciornei
` (7 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Ioana Ciornei @ 2015-03-12 1:23 UTC (permalink / raw)
To: outreachy-kernel; +Cc: Ioana Ciornei
Place space between control flow instructions such as: if, switch,
while etc and '(' in order to improve readability.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
---
drivers/staging/sm750fb/sm750.c | 180 ++++++++++++++++++++--------------------
1 file changed, 90 insertions(+), 90 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index 010b849..46c3aeb 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -64,7 +64,7 @@ static inline void myspin_lock(spinlock_t *sl){
struct lynx_share *share;
share = container_of(sl, struct lynx_share, slock);
- if(share->dual)
+ if (share->dual)
spin_lock(sl);
}
@@ -72,7 +72,7 @@ static inline void myspin_unlock(spinlock_t *sl){
struct lynx_share *share;
share = container_of(sl, struct lynx_share, slock);
- if(share->dual)
+ if (share->dual)
spin_unlock(sl);
}
static const struct fb_videomode lynx750_ext[] = {
@@ -142,22 +142,22 @@ static int lynxfb_ops_cursor(struct fb_info* info, struct fb_cursor* fbcursor)
crtc = &par->crtc;
cursor = &crtc->cursor;
- if(fbcursor->image.width > cursor->maxW ||
+ if (fbcursor->image.width > cursor->maxW ||
fbcursor->image.height > cursor->maxH ||
fbcursor->image.depth > 1){
return -ENXIO;
}
cursor->disable(cursor);
- if(fbcursor->set & FB_CUR_SETSIZE)
+ if (fbcursor->set & FB_CUR_SETSIZE)
cursor->setSize(cursor, fbcursor->image.width, fbcursor->image.height);
- if(fbcursor->set & FB_CUR_SETPOS){
+ if (fbcursor->set & FB_CUR_SETPOS){
cursor->setPos(cursor, fbcursor->image.dx - info->var.xoffset,
fbcursor->image.dy - info->var.yoffset);
}
- if(fbcursor->set & FB_CUR_SETCMAP){
+ if (fbcursor->set & FB_CUR_SETCMAP){
/* get the 16bit color of kernel means */
u16 fg, bg;
@@ -173,7 +173,7 @@ static int lynxfb_ops_cursor(struct fb_info* info, struct fb_cursor* fbcursor)
}
- if(fbcursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE))
+ if (fbcursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE))
{
cursor->setData(cursor,
fbcursor->rop,
@@ -181,7 +181,7 @@ static int lynxfb_ops_cursor(struct fb_info* info, struct fb_cursor* fbcursor)
fbcursor->mask);
}
- if(fbcursor->enable)
+ if (fbcursor->enable)
cursor->enable(cursor);
return 0;
@@ -194,7 +194,7 @@ static void lynxfb_ops_fillrect(struct fb_info* info, const struct fb_fillrect*
unsigned int base, pitch, Bpp, rop;
u32 color;
- if(info->state != FBINFO_STATE_RUNNING)
+ if (info->state != FBINFO_STATE_RUNNING)
return;
par = info->par;
@@ -256,8 +256,8 @@ static void lynxfb_ops_imageblit(struct fb_info *info, const struct fb_image *im
pitch = info->fix.line_length;
Bpp = info->var.bits_per_pixel >> 3;
- if(image->depth == 1){
- if(info->fix.visual == FB_VISUAL_TRUECOLOR ||
+ if (image->depth == 1){
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
info->fix.visual == FB_VISUAL_DIRECTCOLOR)
{
fgcol = ((u32*)info->pseudo_palette)[image->fg_color];
@@ -290,7 +290,7 @@ static int lynxfb_ops_pan_display(struct fb_var_screeninfo *var,
int ret;
- if(!info)
+ if (!info)
return -EINVAL;
ret = 0;
@@ -312,7 +312,7 @@ static int lynxfb_suspend(struct pci_dev *pdev, pm_message_t mesg)
int ret;
- if(mesg.event == pdev->dev.power.power_state.event)
+ if (mesg.event == pdev->dev.power.power_state.event)
return 0;
ret = 0;
@@ -327,26 +327,26 @@ static int lynxfb_suspend(struct pci_dev *pdev, pm_message_t mesg)
console_lock();
if (mesg.event & PM_EVENT_SLEEP) {
info = share->fbinfo[0];
- if(info)
+ if (info)
fb_set_suspend(info, 1);/* 1 means do suspend*/
info = share->fbinfo[1];
- if(info)
+ if (info)
fb_set_suspend(info, 1);/* 1 means do suspend*/
ret = pci_save_state(pdev);
- if(ret){
+ if (ret){
pr_err("error:%d occured in pci_save_state\n", ret);
return ret;
}
/* set chip to sleep mode */
- if(share->suspend)
+ if (share->suspend)
(*share->suspend)(share);
pci_disable_device(pdev);
ret = pci_set_power_state(pdev, pci_choose_state(pdev, mesg));
- if(ret){
+ if (ret){
pr_err("error:%d occured in pci_set_power_state\n", ret);
return ret;
}
@@ -369,7 +369,7 @@ static int lynxfb_ops_set_par(struct fb_info *info)
unsigned int line_length;
- if(!info)
+ if (!info)
return -EINVAL;
ret = 0;
@@ -390,7 +390,7 @@ static int lynxfb_ops_set_par(struct fb_info *info)
* and these data should be set before setcolreg routine
* */
- switch(var->bits_per_pixel){
+ switch (var->bits_per_pixel){
case 8:
fix->visual = FB_VISUAL_PSEUDOCOLOR;
var->red.offset = 0;
@@ -430,12 +430,12 @@ static int lynxfb_ops_set_par(struct fb_info *info)
var->height = var->width = -1;
var->accel_flags = 0;/*FB_ACCELF_TEXT;*/
- if(ret){
+ if (ret){
pr_err("pixel bpp format not satisfied\n.");
return ret;
}
ret = crtc->proc_setMode(crtc, var, fix);
- if(!ret)
+ if (!ret)
ret = output->proc_setMode(output, var, fix);
return ret;
}
@@ -464,13 +464,13 @@ static int lynxfb_resume(struct pci_dev *pdev)
console_lock();
- if((ret = pci_set_power_state(pdev, PCI_D0)) != 0){
+ if ((ret = pci_set_power_state(pdev, PCI_D0)) != 0){
pr_err("error:%d occured in pci_set_power_state\n", ret);
return ret;
}
- if(pdev->dev.power.power_state.event != PM_EVENT_FREEZE){
+ if (pdev->dev.power.power_state.event != PM_EVENT_FREEZE){
pci_restore_state(pdev);
if ((ret = pci_enable_device(pdev)) != 0){
pr_err("error:%d occured in pci_enable_device\n", ret);
@@ -478,7 +478,7 @@ static int lynxfb_resume(struct pci_dev *pdev)
}
pci_set_master(pdev);
}
- if(share->resume)
+ if (share->resume)
(*share->resume)(share);
hw_sm750_inithw(share, pdev);
@@ -486,7 +486,7 @@ static int lynxfb_resume(struct pci_dev *pdev)
info = share->fbinfo[0];
- if(info){
+ if (info){
par = info->par;
crtc = &par->crtc;
cursor = &crtc->cursor;
@@ -498,7 +498,7 @@ static int lynxfb_resume(struct pci_dev *pdev)
info = share->fbinfo[1];
- if(info){
+ if (info){
par = info->par;
crtc = &par->crtc;
cursor = &crtc->cursor;
@@ -599,7 +599,7 @@ static int lynxfb_ops_check_var(struct fb_var_screeninfo *var, struct fb_info *i
var->bits_per_pixel);
- switch(var->bits_per_pixel){
+ switch (var->bits_per_pixel){
case 8:
case 16:
case 24: /* support 24 bpp for only lynx712/722/720 */
@@ -611,7 +611,7 @@ static int lynxfb_ops_check_var(struct fb_var_screeninfo *var, struct fb_info *i
goto exit;
}
- switch(var->bits_per_pixel){
+ switch (var->bits_per_pixel){
case 8:
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
var->red.offset = 0;
@@ -657,13 +657,13 @@ static int lynxfb_ops_check_var(struct fb_var_screeninfo *var, struct fb_info *i
request = PADDING(crtc->line_pad, request);
request = request * var->yres_virtual;
- if(crtc->vidmem_size < request){
+ if (crtc->vidmem_size < request){
pr_err("not enough video memory for mode\n");
return -ENOMEM;
}
ret = output->proc_checkMode(output, var);
- if(!ret)
+ if (!ret)
ret = crtc->proc_checkMode(crtc, var);
exit:
return ret;
@@ -685,15 +685,15 @@ static int lynxfb_ops_setcolreg(unsigned regno, unsigned red,
ret = 0;
//pr_debug("regno=%d, red=%d, green=%d, blue=%d\n", regno, red, green, blue);
- if(regno > 256){
+ if (regno > 256){
pr_err("regno = %d\n", regno);
return -EINVAL;
}
- if(info->var.grayscale)
+ if (info->var.grayscale)
red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
- if(var->bits_per_pixel == 8 && info->fix.visual == FB_VISUAL_PSEUDOCOLOR)
+ if (var->bits_per_pixel == 8 && info->fix.visual == FB_VISUAL_PSEUDOCOLOR)
{
red >>= 8;
green >>= 8;
@@ -703,11 +703,11 @@ static int lynxfb_ops_setcolreg(unsigned regno, unsigned red,
}
- if(info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 256 )
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 256 )
{
u32 val;
- if(var->bits_per_pixel == 16 ||
+ if (var->bits_per_pixel == 16 ||
var->bits_per_pixel == 32 ||
var->bits_per_pixel == 24)
{
@@ -788,7 +788,7 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
crtc->vScreen = share->pvMem;
break;
case sm750_dual_normal:
- if(par->index == 0){
+ if (par->index == 0){
output->paths = sm750_panel;
crtc->channel = sm750_primary;
crtc->oScreen = 0;
@@ -802,7 +802,7 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
}
break;
case sm750_dual_swap:
- if(par->index == 0){
+ if (par->index == 0){
output->paths = sm750_panel;
crtc->channel = sm750_secondary;
crtc->oScreen = 0;
@@ -900,14 +900,14 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
crtc->cursor.share = share;
memset(crtc->cursor.vstart, 0, crtc->cursor.size);
- if(!g_hwcursor) {
+ if (!g_hwcursor) {
lynxfb_ops.fb_cursor = NULL;
crtc->cursor.disable(&crtc->cursor);
}
/* set info->fbops, must be set before fb_find_mode */
- if(!share->accel_off){
+ if (!share->accel_off){
/* use 2d acceleration */
lynxfb_ops.fb_fillrect = lynxfb_ops_fillrect;
lynxfb_ops.fb_copyarea = lynxfb_ops_copyarea;
@@ -915,32 +915,32 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
}
info->fbops = &lynxfb_ops;
- if(!g_fbmode[index]) {
+ if (!g_fbmode[index]) {
g_fbmode[index] = g_def_fbmode;
- if(index)
+ if (index)
g_fbmode[index] = g_fbmode[0];
}
- for(i=0;i<3;i++){
+ for (i=0;i<3;i++){
ret = fb_find_mode(var, info, g_fbmode[index],
pdb[i], cdb[i], NULL, 8);
- if(ret == 1){
+ if (ret == 1){
pr_info("success! use specified mode:%s in %s\n",
g_fbmode[index],
mdb_desc[i]);
break;
- }else if(ret == 2){
+ }else if (ret == 2){
pr_warn("use specified mode:%s in %s, with an ignored refresh rate\n",
g_fbmode[index],
mdb_desc[i]);
break;
- }else if(ret == 3){
+ }else if (ret == 3){
pr_warn("wanna use default mode\n");
// break;
- }else if(ret == 4){
+ }else if (ret == 4){
pr_warn("fall back to any valid mode\n");
}else{
pr_warn("ret = %d, fb_find_mode failed, with %s\n", ret, mdb_desc[i]);
@@ -1000,7 +1000,7 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
pr_info("fix->mmio_start = %lx\n", fix->mmio_start);
fix->mmio_len = share->vidreg_size;
pr_info("fix->mmio_len = %x\n", fix->mmio_len);
- switch(var->bits_per_pixel) {
+ switch (var->bits_per_pixel) {
case 8:
fix->visual = FB_VISUAL_PSEUDOCOLOR;
break;
@@ -1020,7 +1020,7 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
info->cmap.red, info->cmap.green, info->cmap.blue,
info->cmap.transp);
- if((ret = fb_alloc_cmap(&info->cmap, 256, 0)) < 0) {
+ if ((ret = fb_alloc_cmap(&info->cmap, 256, 0)) < 0) {
pr_err("Could not allcate memory for cmap.\n");
goto exit;
}
@@ -1064,40 +1064,40 @@ static void sm750fb_setup(struct lynx_share *share, char *src)
/*defaultly turn g_hwcursor on for both view */
g_hwcursor = 3;
- if(!src || !*src){
+ if (!src || !*src){
pr_warn("no specific g_option.\n");
goto NO_PARAM;
}
- while((opt = strsep(&src, ":")) != NULL && *opt != NULL) {
+ while ((opt = strsep(&src, ":")) != NULL && *opt != NULL) {
pr_err("opt=%s\n", opt);
pr_err("src=%s\n", src);
- if(!strncmp(opt, "swap", strlen("swap")))
+ if (!strncmp(opt, "swap", strlen("swap")))
swap = 1;
- else if(!strncmp(opt, "nocrt", strlen("nocrt")))
+ else if (!strncmp(opt, "nocrt", strlen("nocrt")))
spec_share->state.nocrt = 1;
- else if(!strncmp(opt, "36bit", strlen("36bit")))
+ else if (!strncmp(opt, "36bit", strlen("36bit")))
spec_share->state.pnltype = sm750_doubleTFT;
- else if(!strncmp(opt, "18bit", strlen("18bit")))
+ else if (!strncmp(opt, "18bit", strlen("18bit")))
spec_share->state.pnltype = sm750_dualTFT;
- else if(!strncmp(opt, "24bit", strlen("24bit")))
+ else if (!strncmp(opt, "24bit", strlen("24bit")))
spec_share->state.pnltype = sm750_24TFT;
#ifdef CAP_EXPANSION
- else if(!strncmp(opt, "exp:", strlen("exp:")))
+ else if (!strncmp(opt, "exp:", strlen("exp:")))
exp_res = opt + strlen("exp:");
#endif
- else if(!strncmp(opt, "nohwc0", strlen("nohwc0")))
+ else if (!strncmp(opt, "nohwc0", strlen("nohwc0")))
g_hwcursor &= ~0x1;
- else if(!strncmp(opt, "nohwc1", strlen("nohwc1")))
+ else if (!strncmp(opt, "nohwc1", strlen("nohwc1")))
g_hwcursor &= ~0x2;
- else if(!strncmp(opt, "nohwc", strlen("nohwc")))
+ else if (!strncmp(opt, "nohwc", strlen("nohwc")))
g_hwcursor = 0;
else {
- if(!g_fbmode[0]){
+ if (!g_fbmode[0]){
g_fbmode[0] = opt;
pr_info("find fbmode0 : %s\n", g_fbmode[0]);
- }else if(!g_fbmode[1]){
+ }else if (!g_fbmode[1]){
g_fbmode[1] = opt;
pr_info("find fbmode1 : %s\n", g_fbmode[1]);
}else{
@@ -1106,21 +1106,21 @@ static void sm750fb_setup(struct lynx_share *share, char *src)
}
}
#ifdef CAP_EXPANSION
- if(getExpRes(exp_res, &spec_share->state.xLCD, &spec_share->state.yLCD)) {
+ if (getExpRes(exp_res, &spec_share->state.xLCD, &spec_share->state.yLCD)) {
/* seems exp_res is not valid*/
spec_share->state.xLCD = spec_share->state.yLCD = 0;
}
#endif
NO_PARAM:
- if(share->revid != SM750LE_REVISION_ID){
- if(share->dual) {
- if(swap)
+ if (share->revid != SM750LE_REVISION_ID){
+ if (share->dual) {
+ if (swap)
spec_share->state.dataflow = sm750_dual_swap;
else
spec_share->state.dataflow = sm750_dual_normal;
} else {
- if(swap)
+ if (swap)
spec_share->state.dataflow = sm750_simul_sec;
else
spec_share->state.dataflow = sm750_simul_pri;
@@ -1145,7 +1145,7 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
/* enable device */
- if(pci_enable_device(pdev)){
+ if (pci_enable_device(pdev)){
pr_err("can not enable device.\n");
goto err_enable;
}
@@ -1155,7 +1155,7 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
spec_offset = offsetof(struct sm750_share, share);
spec_share = kzalloc(sizeof(*spec_share), GFP_KERNEL);
- if(!spec_share){
+ if (!spec_share){
pr_err("Could not allocate memory for share.\n");
goto err_share;
}
@@ -1177,7 +1177,7 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
share->dual = g_dualview;
spin_lock_init(&share->slock);
- if(!share->accel_off){
+ if (!share->accel_off){
/* hook deInit and 2d routines, notes that below hw_xxx
* routine can work on most of lynx chips
* if some chip need specific function, please hook it in smXXX_set_drv
@@ -1195,19 +1195,19 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
sm750fb_setup(share, g_settings);
/* call chip specific mmap routine */
- if(hw_sm750_map(share, pdev)){
+ if (hw_sm750_map(share, pdev)){
pr_err("Memory map failed\n");
goto err_map;
}
#ifdef CONFIG_MTRR
- if(!share->mtrr_off){
+ if (!share->mtrr_off){
pr_info("enable mtrr\n");
share->mtrr.vram = mtrr_add(share->vidmem_start,
share->vidmem_size,
MTRR_TYPE_WRCOMB, 1);
- if(share->mtrr.vram < 0){
+ if (share->mtrr.vram < 0){
/* don't block driver with the failure of MTRR */
pr_err("Unable to setup MTRR.\n");
}else{
@@ -1230,10 +1230,10 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
fbidx = 0;
ALLOC_FB:
info[fbidx] = framebuffer_alloc(sizeof(struct lynxfb_par), &pdev->dev);
- if(!info[fbidx])
+ if (!info[fbidx])
{
pr_err("Could not allocate framebuffer #%d.\n", fbidx);
- if(fbidx == 0)
+ if (fbidx == 0)
goto err_info0_alloc;
else
goto err_info1_alloc;
@@ -1248,9 +1248,9 @@ ALLOC_FB:
par->share = share;
/* set fb_info structure */
- if(lynxfb_set_fbinfo(info[fbidx], fbidx)){
+ if (lynxfb_set_fbinfo(info[fbidx], fbidx)){
pr_err("Failed to initial fb_info #%d.\n", fbidx);
- if(fbidx == 0)
+ if (fbidx == 0)
goto err_info0_set;
else
goto err_info1_set;
@@ -1262,7 +1262,7 @@ ALLOC_FB:
if (errno < 0) {
pr_err("Failed to register fb_info #%d. err %d\n", fbidx, errno);
- if(fbidx == 0)
+ if (fbidx == 0)
goto err_register0;
else
goto err_register1;
@@ -1272,7 +1272,7 @@ ALLOC_FB:
/* no dual view by far */
fbidx++;
- if(share->dual && fbidx < 2)
+ if (share->dual && fbidx < 2)
goto ALLOC_FB;
return 0;
@@ -1304,9 +1304,9 @@ static void __exit lynxfb_pci_remove(struct pci_dev *pdev)
cnt = 2;
share = pci_get_drvdata(pdev);
- while(cnt-- > 0){
+ while (cnt-- > 0){
info = share->fbinfo[cnt];
- if(!info)
+ if (!info)
continue;
par = info->par;
@@ -1318,7 +1318,7 @@ static void __exit lynxfb_pci_remove(struct pci_dev *pdev)
framebuffer_release(info);
}
#ifdef CONFIG_MTRR
- if(share->mtrr.vram_added)
+ if (share->mtrr.vram_added)
mtrr_del(share->mtrr.vram, share->vidmem_start, share->vidmem_size);
#endif
// pci_release_regions(pdev);
@@ -1337,7 +1337,7 @@ static int __init lynxfb_setup(char *options)
char *opt, *tmp;
- if(!options || !*options){
+ if (!options || !*options){
pr_warn("no options.\n");
return 0;
}
@@ -1346,7 +1346,7 @@ static int __init lynxfb_setup(char *options)
len = strlen(options) + 1;
g_settings = kmalloc(len, GFP_KERNEL);
- if(!g_settings)
+ if (!g_settings)
return -ENOMEM;
memset(g_settings, 0, len);
@@ -1360,22 +1360,22 @@ static int __init lynxfb_setup(char *options)
strsep() updates @options to pointer after the first found token
it also returns the pointer ahead the token.
*/
- while((opt = strsep(&options, ":"))!=NULL)
+ while ((opt = strsep(&options, ":"))!=NULL)
{
/* options that mean for any lynx chips are configured here */
- if(!strncmp(opt, "noaccel", strlen("noaccel")))
+ if (!strncmp(opt, "noaccel", strlen("noaccel")))
g_noaccel = 1;
#ifdef CONFIG_MTRR
- else if(!strncmp(opt, "nomtrr", strlen("nomtrr")))
+ else if (!strncmp(opt, "nomtrr", strlen("nomtrr")))
g_nomtrr = 1;
#endif
- else if(!strncmp(opt, "dual", strlen("dual")))
+ else if (!strncmp(opt, "dual", strlen("dual")))
g_dualview = 1;
else
{
strcat(tmp, opt);
tmp += strlen(opt);
- if(options != NULL)
+ if (options != NULL)
*tmp++ = ':';
else
*tmp++ = 0;
@@ -1414,7 +1414,7 @@ static int __init lynxfb_init(void)
#ifdef MODULE
option = g_option;
#else
- if(fb_get_options("sm750fb", &option))
+ if (fb_get_options("sm750fb", &option))
return -ENODEV;
#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/9] staging: sm750: Add space before open bracket '{'
2015-03-12 1:23 [PATCH 0/9] staging: sm750: Fix most style errors Ioana Ciornei
2015-03-12 1:23 ` [PATCH 1/9] staging: sm750: Place space before after control flow instructions Ioana Ciornei
@ 2015-03-12 1:23 ` Ioana Ciornei
2015-03-12 1:23 ` [PATCH 3/9] staging: sm750: Place space before and after curly brackets Ioana Ciornei
` (6 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Ioana Ciornei @ 2015-03-12 1:23 UTC (permalink / raw)
To: outreachy-kernel; +Cc: Ioana Ciornei
Add space before curly open bracket '{', to follow Linux coding style.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
---
drivers/staging/sm750fb/sm750.c | 80 ++++++++++++++++++++---------------------
1 file changed, 40 insertions(+), 40 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index 46c3aeb..67c3751 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -60,7 +60,7 @@ static char *g_option = NULL;
/* if not use spin_lock, system will die if user load driver
* and immediatly unload driver frequently (dual)*/
-static inline void myspin_lock(spinlock_t *sl){
+static inline void myspin_lock(spinlock_t *sl) {
struct lynx_share *share;
share = container_of(sl, struct lynx_share, slock);
@@ -68,7 +68,7 @@ static inline void myspin_lock(spinlock_t *sl){
spin_lock(sl);
}
-static inline void myspin_unlock(spinlock_t *sl){
+static inline void myspin_unlock(spinlock_t *sl) {
struct lynx_share *share;
share = container_of(sl, struct lynx_share, slock);
@@ -144,7 +144,7 @@ static int lynxfb_ops_cursor(struct fb_info* info, struct fb_cursor* fbcursor)
if (fbcursor->image.width > cursor->maxW ||
fbcursor->image.height > cursor->maxH ||
- fbcursor->image.depth > 1){
+ fbcursor->image.depth > 1) {
return -ENXIO;
}
@@ -152,12 +152,12 @@ static int lynxfb_ops_cursor(struct fb_info* info, struct fb_cursor* fbcursor)
if (fbcursor->set & FB_CUR_SETSIZE)
cursor->setSize(cursor, fbcursor->image.width, fbcursor->image.height);
- if (fbcursor->set & FB_CUR_SETPOS){
+ if (fbcursor->set & FB_CUR_SETPOS) {
cursor->setPos(cursor, fbcursor->image.dx - info->var.xoffset,
fbcursor->image.dy - info->var.yoffset);
}
- if (fbcursor->set & FB_CUR_SETCMAP){
+ if (fbcursor->set & FB_CUR_SETCMAP) {
/* get the 16bit color of kernel means */
u16 fg, bg;
@@ -256,7 +256,7 @@ static void lynxfb_ops_imageblit(struct fb_info *info, const struct fb_image *im
pitch = info->fix.line_length;
Bpp = info->var.bits_per_pixel >> 3;
- if (image->depth == 1){
+ if (image->depth == 1) {
if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
info->fix.visual == FB_VISUAL_DIRECTCOLOR)
{
@@ -335,7 +335,7 @@ static int lynxfb_suspend(struct pci_dev *pdev, pm_message_t mesg)
fb_set_suspend(info, 1);/* 1 means do suspend*/
ret = pci_save_state(pdev);
- if (ret){
+ if (ret) {
pr_err("error:%d occured in pci_save_state\n", ret);
return ret;
}
@@ -346,7 +346,7 @@ static int lynxfb_suspend(struct pci_dev *pdev, pm_message_t mesg)
pci_disable_device(pdev);
ret = pci_set_power_state(pdev, pci_choose_state(pdev, mesg));
- if (ret){
+ if (ret) {
pr_err("error:%d occured in pci_set_power_state\n", ret);
return ret;
}
@@ -390,7 +390,7 @@ static int lynxfb_ops_set_par(struct fb_info *info)
* and these data should be set before setcolreg routine
* */
- switch (var->bits_per_pixel){
+ switch (var->bits_per_pixel) {
case 8:
fix->visual = FB_VISUAL_PSEUDOCOLOR;
var->red.offset = 0;
@@ -430,7 +430,7 @@ static int lynxfb_ops_set_par(struct fb_info *info)
var->height = var->width = -1;
var->accel_flags = 0;/*FB_ACCELF_TEXT;*/
- if (ret){
+ if (ret) {
pr_err("pixel bpp format not satisfied\n.");
return ret;
}
@@ -464,15 +464,15 @@ static int lynxfb_resume(struct pci_dev *pdev)
console_lock();
- if ((ret = pci_set_power_state(pdev, PCI_D0)) != 0){
+ if ((ret = pci_set_power_state(pdev, PCI_D0)) != 0) {
pr_err("error:%d occured in pci_set_power_state\n", ret);
return ret;
}
- if (pdev->dev.power.power_state.event != PM_EVENT_FREEZE){
+ if (pdev->dev.power.power_state.event != PM_EVENT_FREEZE) {
pci_restore_state(pdev);
- if ((ret = pci_enable_device(pdev)) != 0){
+ if ((ret = pci_enable_device(pdev)) != 0) {
pr_err("error:%d occured in pci_enable_device\n", ret);
return ret;
}
@@ -486,7 +486,7 @@ static int lynxfb_resume(struct pci_dev *pdev)
info = share->fbinfo[0];
- if (info){
+ if (info) {
par = info->par;
crtc = &par->crtc;
cursor = &crtc->cursor;
@@ -498,7 +498,7 @@ static int lynxfb_resume(struct pci_dev *pdev)
info = share->fbinfo[1];
- if (info){
+ if (info) {
par = info->par;
crtc = &par->crtc;
cursor = &crtc->cursor;
@@ -599,7 +599,7 @@ static int lynxfb_ops_check_var(struct fb_var_screeninfo *var, struct fb_info *i
var->bits_per_pixel);
- switch (var->bits_per_pixel){
+ switch (var->bits_per_pixel) {
case 8:
case 16:
case 24: /* support 24 bpp for only lynx712/722/720 */
@@ -611,7 +611,7 @@ static int lynxfb_ops_check_var(struct fb_var_screeninfo *var, struct fb_info *i
goto exit;
}
- switch (var->bits_per_pixel){
+ switch (var->bits_per_pixel) {
case 8:
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
var->red.offset = 0;
@@ -657,7 +657,7 @@ static int lynxfb_ops_check_var(struct fb_var_screeninfo *var, struct fb_info *i
request = PADDING(crtc->line_pad, request);
request = request * var->yres_virtual;
- if (crtc->vidmem_size < request){
+ if (crtc->vidmem_size < request) {
pr_err("not enough video memory for mode\n");
return -ENOMEM;
}
@@ -685,7 +685,7 @@ static int lynxfb_ops_setcolreg(unsigned regno, unsigned red,
ret = 0;
//pr_debug("regno=%d, red=%d, green=%d, blue=%d\n", regno, red, green, blue);
- if (regno > 256){
+ if (regno > 256) {
pr_err("regno = %d\n", regno);
return -EINVAL;
}
@@ -788,7 +788,7 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
crtc->vScreen = share->pvMem;
break;
case sm750_dual_normal:
- if (par->index == 0){
+ if (par->index == 0) {
output->paths = sm750_panel;
crtc->channel = sm750_primary;
crtc->oScreen = 0;
@@ -802,7 +802,7 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
}
break;
case sm750_dual_swap:
- if (par->index == 0){
+ if (par->index == 0) {
output->paths = sm750_panel;
crtc->channel = sm750_secondary;
crtc->oScreen = 0;
@@ -907,7 +907,7 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
/* set info->fbops, must be set before fb_find_mode */
- if (!share->accel_off){
+ if (!share->accel_off) {
/* use 2d acceleration */
lynxfb_ops.fb_fillrect = lynxfb_ops_fillrect;
lynxfb_ops.fb_copyarea = lynxfb_ops_copyarea;
@@ -922,25 +922,25 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
}
- for (i=0;i<3;i++){
+ for (i=0;i<3;i++) {
ret = fb_find_mode(var, info, g_fbmode[index],
pdb[i], cdb[i], NULL, 8);
- if (ret == 1){
+ if (ret == 1) {
pr_info("success! use specified mode:%s in %s\n",
g_fbmode[index],
mdb_desc[i]);
break;
- }else if (ret == 2){
+ }else if (ret == 2) {
pr_warn("use specified mode:%s in %s, with an ignored refresh rate\n",
g_fbmode[index],
mdb_desc[i]);
break;
- }else if (ret == 3){
+ }else if (ret == 3) {
pr_warn("wanna use default mode\n");
// break;
- }else if (ret == 4){
+ }else if (ret == 4) {
pr_warn("fall back to any valid mode\n");
}else{
pr_warn("ret = %d, fb_find_mode failed, with %s\n", ret, mdb_desc[i]);
@@ -1064,7 +1064,7 @@ static void sm750fb_setup(struct lynx_share *share, char *src)
/*defaultly turn g_hwcursor on for both view */
g_hwcursor = 3;
- if (!src || !*src){
+ if (!src || !*src) {
pr_warn("no specific g_option.\n");
goto NO_PARAM;
}
@@ -1094,10 +1094,10 @@ static void sm750fb_setup(struct lynx_share *share, char *src)
else if (!strncmp(opt, "nohwc", strlen("nohwc")))
g_hwcursor = 0;
else {
- if (!g_fbmode[0]){
+ if (!g_fbmode[0]) {
g_fbmode[0] = opt;
pr_info("find fbmode0 : %s\n", g_fbmode[0]);
- }else if (!g_fbmode[1]){
+ }else if (!g_fbmode[1]) {
g_fbmode[1] = opt;
pr_info("find fbmode1 : %s\n", g_fbmode[1]);
}else{
@@ -1113,7 +1113,7 @@ static void sm750fb_setup(struct lynx_share *share, char *src)
#endif
NO_PARAM:
- if (share->revid != SM750LE_REVISION_ID){
+ if (share->revid != SM750LE_REVISION_ID) {
if (share->dual) {
if (swap)
spec_share->state.dataflow = sm750_dual_swap;
@@ -1145,7 +1145,7 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
/* enable device */
- if (pci_enable_device(pdev)){
+ if (pci_enable_device(pdev)) {
pr_err("can not enable device.\n");
goto err_enable;
}
@@ -1155,7 +1155,7 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
spec_offset = offsetof(struct sm750_share, share);
spec_share = kzalloc(sizeof(*spec_share), GFP_KERNEL);
- if (!spec_share){
+ if (!spec_share) {
pr_err("Could not allocate memory for share.\n");
goto err_share;
}
@@ -1177,7 +1177,7 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
share->dual = g_dualview;
spin_lock_init(&share->slock);
- if (!share->accel_off){
+ if (!share->accel_off) {
/* hook deInit and 2d routines, notes that below hw_xxx
* routine can work on most of lynx chips
* if some chip need specific function, please hook it in smXXX_set_drv
@@ -1195,19 +1195,19 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
sm750fb_setup(share, g_settings);
/* call chip specific mmap routine */
- if (hw_sm750_map(share, pdev)){
+ if (hw_sm750_map(share, pdev)) {
pr_err("Memory map failed\n");
goto err_map;
}
#ifdef CONFIG_MTRR
- if (!share->mtrr_off){
+ if (!share->mtrr_off) {
pr_info("enable mtrr\n");
share->mtrr.vram = mtrr_add(share->vidmem_start,
share->vidmem_size,
MTRR_TYPE_WRCOMB, 1);
- if (share->mtrr.vram < 0){
+ if (share->mtrr.vram < 0) {
/* don't block driver with the failure of MTRR */
pr_err("Unable to setup MTRR.\n");
}else{
@@ -1248,7 +1248,7 @@ ALLOC_FB:
par->share = share;
/* set fb_info structure */
- if (lynxfb_set_fbinfo(info[fbidx], fbidx)){
+ if (lynxfb_set_fbinfo(info[fbidx], fbidx)) {
pr_err("Failed to initial fb_info #%d.\n", fbidx);
if (fbidx == 0)
goto err_info0_set;
@@ -1304,7 +1304,7 @@ static void __exit lynxfb_pci_remove(struct pci_dev *pdev)
cnt = 2;
share = pci_get_drvdata(pdev);
- while (cnt-- > 0){
+ while (cnt-- > 0) {
info = share->fbinfo[cnt];
if (!info)
continue;
@@ -1337,7 +1337,7 @@ static int __init lynxfb_setup(char *options)
char *opt, *tmp;
- if (!options || !*options){
+ if (!options || !*options) {
pr_warn("no options.\n");
return 0;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 3/9] staging: sm750: Place space before and after curly brackets
2015-03-12 1:23 [PATCH 0/9] staging: sm750: Fix most style errors Ioana Ciornei
2015-03-12 1:23 ` [PATCH 1/9] staging: sm750: Place space before after control flow instructions Ioana Ciornei
2015-03-12 1:23 ` [PATCH 2/9] staging: sm750: Add space before open bracket '{' Ioana Ciornei
@ 2015-03-12 1:23 ` Ioana Ciornei
2015-03-12 1:23 ` [PATCH 4/9] staging: sm750: Remove space before semicolon Ioana Ciornei
` (5 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Ioana Ciornei @ 2015-03-12 1:23 UTC (permalink / raw)
To: outreachy-kernel; +Cc: Ioana Ciornei
Add space before and after curly brackets when is needed in order to
follow Linux coding style.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
---
drivers/staging/sm750fb/sm750.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index 67c3751..2eab4de 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -793,7 +793,7 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
crtc->channel = sm750_primary;
crtc->oScreen = 0;
crtc->vScreen = share->pvMem;
- }else{
+ } else {
output->paths = sm750_crt;
crtc->channel = sm750_secondary;
/* not consider of padding stuffs for oScreen, need fix*/
@@ -807,7 +807,7 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
crtc->channel = sm750_secondary;
crtc->oScreen = 0;
crtc->vScreen = share->pvMem;
- }else{
+ } else {
output->paths = sm750_crt;
crtc->channel = sm750_primary;
/* not consider of padding stuffs for oScreen, need fix*/
@@ -932,17 +932,17 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
g_fbmode[index],
mdb_desc[i]);
break;
- }else if (ret == 2) {
+ } else if (ret == 2) {
pr_warn("use specified mode:%s in %s, with an ignored refresh rate\n",
g_fbmode[index],
mdb_desc[i]);
break;
- }else if (ret == 3) {
+ } else if (ret == 3) {
pr_warn("wanna use default mode\n");
// break;
- }else if (ret == 4) {
+ } else if (ret == 4) {
pr_warn("fall back to any valid mode\n");
- }else{
+ } else {
pr_warn("ret = %d, fb_find_mode failed, with %s\n", ret, mdb_desc[i]);
}
}
@@ -1097,10 +1097,10 @@ static void sm750fb_setup(struct lynx_share *share, char *src)
if (!g_fbmode[0]) {
g_fbmode[0] = opt;
pr_info("find fbmode0 : %s\n", g_fbmode[0]);
- }else if (!g_fbmode[1]) {
+ } else if (!g_fbmode[1]) {
g_fbmode[1] = opt;
pr_info("find fbmode1 : %s\n", g_fbmode[1]);
- }else{
+ } else {
pr_warn("How many view you wann set?\n");
}
}
@@ -1187,7 +1187,7 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
share->accel.de_copyarea = hw_copyarea;
share->accel.de_imageblit = hw_imageblit;
pr_info("enable 2d acceleration\n");
- }else{
+ } else {
pr_info("disable 2d acceleration\n");
}
@@ -1210,7 +1210,7 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
if (share->mtrr.vram < 0) {
/* don't block driver with the failure of MTRR */
pr_err("Unable to setup MTRR.\n");
- }else{
+ } else {
share->mtrr.vram_added = 1;
pr_info("MTRR added succesfully\n");
}
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 4/9] staging: sm750: Remove space before semicolon
2015-03-12 1:23 [PATCH 0/9] staging: sm750: Fix most style errors Ioana Ciornei
` (2 preceding siblings ...)
2015-03-12 1:23 ` [PATCH 3/9] staging: sm750: Place space before and after curly brackets Ioana Ciornei
@ 2015-03-12 1:23 ` Ioana Ciornei
2015-03-12 1:23 ` [PATCH 5/9] staging: sm750: Place open bracket '{' on the next line Ioana Ciornei
` (4 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Ioana Ciornei @ 2015-03-12 1:23 UTC (permalink / raw)
To: outreachy-kernel; +Cc: Ioana Ciornei
Remove space before semicolon as it is prohibited by tghe Linux coding style.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
---
drivers/staging/sm750fb/sm750.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index 2eab4de..6ac572c 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -419,7 +419,7 @@ static int lynxfb_ops_set_par(struct fb_info *info)
var->red.length = 8;
var->green.offset = 8;
var->green.length = 8;
- var->blue.offset = 0 ;
+ var->blue.offset = 0;
var->blue.length = 8;
fix->visual = FB_VISUAL_TRUECOLOR;
break;
@@ -640,7 +640,7 @@ static int lynxfb_ops_check_var(struct fb_var_screeninfo *var, struct fb_info *i
var->red.length = 8;
var->green.offset = 8;
var->green.length = 8;
- var->blue.offset = 0 ;
+ var->blue.offset = 0;
var->blue.length = 8;
info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
@@ -1408,7 +1408,7 @@ static struct pci_driver lynxfb_driver = {
static int __init lynxfb_init(void)
{
- char *option ;
+ char *option;
int ret;
#ifdef MODULE
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 5/9] staging: sm750: Place open bracket '{' on the next line
2015-03-12 1:23 [PATCH 0/9] staging: sm750: Fix most style errors Ioana Ciornei
` (3 preceding siblings ...)
2015-03-12 1:23 ` [PATCH 4/9] staging: sm750: Remove space before semicolon Ioana Ciornei
@ 2015-03-12 1:23 ` Ioana Ciornei
2015-03-12 6:28 ` [Outreachy kernel] " Julia Lawall
2015-03-12 1:23 ` [PATCH 6/9] staging: sm750: Move open curly bracket on previous line Ioana Ciornei
` (3 subsequent siblings)
8 siblings, 1 reply; 14+ messages in thread
From: Ioana Ciornei @ 2015-03-12 1:23 UTC (permalink / raw)
To: outreachy-kernel; +Cc: Ioana Ciornei
Move open curly bracket on next line after the definition of a function, to follow
the Linux coding style.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
---
drivers/staging/sm750fb/sm750.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index 6ac572c..f6083c4 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -60,7 +60,8 @@ static char *g_option = NULL;
/* if not use spin_lock, system will die if user load driver
* and immediatly unload driver frequently (dual)*/
-static inline void myspin_lock(spinlock_t *sl) {
+static inline void myspin_lock(spinlock_t *sl)
+{
struct lynx_share *share;
share = container_of(sl, struct lynx_share, slock);
@@ -68,7 +69,8 @@ static inline void myspin_lock(spinlock_t *sl) {
spin_lock(sl);
}
-static inline void myspin_unlock(spinlock_t *sl) {
+static inline void myspin_unlock(spinlock_t *sl)
+{
struct lynx_share *share;
share = container_of(sl, struct lynx_share, slock);
@@ -419,7 +421,7 @@ static int lynxfb_ops_set_par(struct fb_info *info)
var->red.length = 8;
var->green.offset = 8;
var->green.length = 8;
- var->blue.offset = 0;
+ var->blue.offset = 0 ;
var->blue.length = 8;
fix->visual = FB_VISUAL_TRUECOLOR;
break;
@@ -640,7 +642,7 @@ static int lynxfb_ops_check_var(struct fb_var_screeninfo *var, struct fb_info *i
var->red.length = 8;
var->green.offset = 8;
var->green.length = 8;
- var->blue.offset = 0;
+ var->blue.offset = 0 ;
var->blue.length = 8;
info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
@@ -772,7 +774,7 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
output->proc_setBLANK = (share->revid == SM750LE_REVISION_ID)?hw_sm750le_setBLANK:hw_sm750_setBLANK;
output->clear = hw_sm750_output_clear;
/* chip specific phase */
- share->accel.de_wait = (share->revid == SM750LE_REVISION_ID)?hw_sm750le_deWait: hw_sm750_deWait;
+ share->accel.de_wait = (share->revid == SM750LE_REVIvSION_ID)?hw_sm750le_deWait: hw_sm750_deWait;
switch (spec_share->state.dataflow) {
case sm750_simul_pri:
output->paths = sm750_pnc;
@@ -1408,7 +1410,7 @@ static struct pci_driver lynxfb_driver = {
static int __init lynxfb_init(void)
{
- char *option;
+ char *option ;
int ret;
#ifdef MODULE
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 6/9] staging: sm750: Move open curly bracket on previous line
2015-03-12 1:23 [PATCH 0/9] staging: sm750: Fix most style errors Ioana Ciornei
` (4 preceding siblings ...)
2015-03-12 1:23 ` [PATCH 5/9] staging: sm750: Place open bracket '{' on the next line Ioana Ciornei
@ 2015-03-12 1:23 ` Ioana Ciornei
2015-03-12 6:27 ` [Outreachy kernel] " Julia Lawall
2015-03-12 1:23 ` [PATCH 7/9] staging: sm750: Remove space before ')' Ioana Ciornei
` (2 subsequent siblings)
8 siblings, 1 reply; 14+ messages in thread
From: Ioana Ciornei @ 2015-03-12 1:23 UTC (permalink / raw)
To: outreachy-kernel; +Cc: Ioana Ciornei
Place curly open bracket surrounding statements blocks on the same line
as the control flow instruction in order to follow with Linux coding style.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
---
drivers/staging/sm750fb/sm750.c | 48 +++++++++++++++--------------------------
1 file changed, 17 insertions(+), 31 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index f6083c4..8f12370 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -175,8 +175,7 @@ static int lynxfb_ops_cursor(struct fb_info* info, struct fb_cursor* fbcursor)
}
- if (fbcursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE))
- {
+ if (fbcursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE)) {
cursor->setData(cursor,
fbcursor->rop,
fbcursor->image.data,
@@ -260,13 +259,10 @@ static void lynxfb_ops_imageblit(struct fb_info *info, const struct fb_image *im
if (image->depth == 1) {
if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
- info->fix.visual == FB_VISUAL_DIRECTCOLOR)
- {
+ info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
fgcol = ((u32*)info->pseudo_palette)[image->fg_color];
bgcol = ((u32*)info->pseudo_palette)[image->bg_color];
- }
- else
- {
+ } else {
fgcol = image->fg_color;
bgcol = image->bg_color;
}
@@ -421,7 +417,7 @@ static int lynxfb_ops_set_par(struct fb_info *info)
var->red.length = 8;
var->green.offset = 8;
var->green.length = 8;
- var->blue.offset = 0 ;
+ var->blue.offset = 0;
var->blue.length = 8;
fix->visual = FB_VISUAL_TRUECOLOR;
break;
@@ -560,8 +556,7 @@ static int lynxfb_ops_mmap(struct fb_info *info, struct vm_area_struct *vma)
printk("lynxfb mmap vm end: %x\n", vma->vm_end);
printk("lynxfb mmap len: %x\n", len);
printk("lynxfb mmap off: %x\n", off);
- if ((vma->vm_end - vma->vm_start + off) > len)
- {
+ if ((vma->vm_end - vma->vm_start + off) > len) {
return -EINVAL;
}
off += start;
@@ -642,7 +637,7 @@ static int lynxfb_ops_check_var(struct fb_var_screeninfo *var, struct fb_info *i
var->red.length = 8;
var->green.offset = 8;
var->green.length = 8;
- var->blue.offset = 0 ;
+ var->blue.offset = 0;
var->blue.length = 8;
info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
@@ -695,8 +690,7 @@ static int lynxfb_ops_setcolreg(unsigned regno, unsigned red,
if (info->var.grayscale)
red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
- if (var->bits_per_pixel == 8 && info->fix.visual == FB_VISUAL_PSEUDOCOLOR)
- {
+ if (var->bits_per_pixel == 8 && info->fix.visual == FB_VISUAL_PSEUDOCOLOR) {
red >>= 8;
green >>= 8;
blue >>= 8;
@@ -705,14 +699,12 @@ static int lynxfb_ops_setcolreg(unsigned regno, unsigned red,
}
- if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 256 )
- {
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 256 ) {
u32 val;
if (var->bits_per_pixel == 16 ||
var->bits_per_pixel == 32 ||
- var->bits_per_pixel == 24)
- {
+ var->bits_per_pixel == 24) {
val = chan_to_field(red, &var->red);
val |= chan_to_field(green, &var->green);
val |= chan_to_field(blue, &var->blue);
@@ -861,9 +853,8 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
};
- static const char *fixId[2]=
- {
- "sm750_fb1", "sm750_fb2",
+ static const char *fixId[2] = {
+ "sm750_fb1", "sm750_fb2",
};
int ret, line_length;
@@ -924,7 +915,7 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
}
- for (i=0;i<3;i++) {
+ for (i = 0; i < 3; i++) {
ret = fb_find_mode(var, info, g_fbmode[index],
pdb[i], cdb[i], NULL, 8);
@@ -1232,16 +1223,13 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
fbidx = 0;
ALLOC_FB:
info[fbidx] = framebuffer_alloc(sizeof(struct lynxfb_par), &pdev->dev);
- if (!info[fbidx])
- {
+ if (!info[fbidx]) {
pr_err("Could not allocate framebuffer #%d.\n", fbidx);
if (fbidx == 0)
goto err_info0_alloc;
else
goto err_info1_alloc;
- }
- else
- {
+ } else {
struct lynxfb_par *par;
pr_info("framebuffer #%d alloc okay\n", fbidx);
@@ -1362,8 +1350,7 @@ static int __init lynxfb_setup(char *options)
strsep() updates @options to pointer after the first found token
it also returns the pointer ahead the token.
*/
- while ((opt = strsep(&options, ":"))!=NULL)
- {
+ while ((opt = strsep(&options, ":"))!=NULL) {
/* options that mean for any lynx chips are configured here */
if (!strncmp(opt, "noaccel", strlen("noaccel")))
g_noaccel = 1;
@@ -1373,8 +1360,7 @@ static int __init lynxfb_setup(char *options)
#endif
else if (!strncmp(opt, "dual", strlen("dual")))
g_dualview = 1;
- else
- {
+ else {
strcat(tmp, opt);
tmp += strlen(opt);
if (options != NULL)
@@ -1410,7 +1396,7 @@ static struct pci_driver lynxfb_driver = {
static int __init lynxfb_init(void)
{
- char *option ;
+ char *option;
int ret;
#ifdef MODULE
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 7/9] staging: sm750: Remove space before ')'
2015-03-12 1:23 [PATCH 0/9] staging: sm750: Fix most style errors Ioana Ciornei
` (5 preceding siblings ...)
2015-03-12 1:23 ` [PATCH 6/9] staging: sm750: Move open curly bracket on previous line Ioana Ciornei
@ 2015-03-12 1:23 ` Ioana Ciornei
2015-03-12 6:26 ` [Outreachy kernel] " Julia Lawall
2015-03-12 1:23 ` [PATCH 8/9] staging: sm750: Place * next to identifier Ioana Ciornei
2015-03-12 1:23 ` [PATCH 9/9] staging: sm750: Add space before and after '=', ':' etc Ioana Ciornei
8 siblings, 1 reply; 14+ messages in thread
From: Ioana Ciornei @ 2015-03-12 1:23 UTC (permalink / raw)
To: outreachy-kernel; +Cc: Ioana Ciornei
Remove space before ')' as it is prohibited by the Linux coding style.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
---
drivers/staging/sm750fb/sm750.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index 8f12370..f5b4dae 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -208,7 +208,7 @@ static void lynxfb_ops_fillrect(struct fb_info* info, const struct fb_fillrect*
Bpp = info->var.bits_per_pixel >> 3;
color = (Bpp == 1)?region->color:((u32*)info->pseudo_palette)[region->color];
- rop = ( region->rop != ROP_COPY ) ? HW_ROP2_XOR:HW_ROP2_COPY;
+ rop = (region->rop != ROP_COPY) ? HW_ROP2_XOR:HW_ROP2_COPY;
myspin_lock(&share->slock);
share->accel.de_fillrect(&share->accel,
@@ -699,7 +699,7 @@ static int lynxfb_ops_setcolreg(unsigned regno, unsigned red,
}
- if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 256 ) {
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 256) {
u32 val;
if (var->bits_per_pixel == 16 ||
@@ -1154,7 +1154,7 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
}
/* setting share structure */
- share = (struct lynx_share * )(&(spec_share->share));
+ share = (struct lynx_share *)(&(spec_share->share));
share->fbinfo[0] = share->fbinfo[1] = NULL;
share->devid = pdev->device;
share->revid = pdev->revision;
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 8/9] staging: sm750: Place * next to identifier
2015-03-12 1:23 [PATCH 0/9] staging: sm750: Fix most style errors Ioana Ciornei
` (6 preceding siblings ...)
2015-03-12 1:23 ` [PATCH 7/9] staging: sm750: Remove space before ')' Ioana Ciornei
@ 2015-03-12 1:23 ` Ioana Ciornei
2015-03-12 1:23 ` [PATCH 9/9] staging: sm750: Add space before and after '=', ':' etc Ioana Ciornei
8 siblings, 0 replies; 14+ messages in thread
From: Ioana Ciornei @ 2015-03-12 1:23 UTC (permalink / raw)
To: outreachy-kernel; +Cc: Ioana Ciornei
Place * in pointer type next to the identifier, to follow Linux
coding style.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
---
drivers/staging/sm750fb/sm750.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index f5b4dae..ffc977b 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -134,7 +134,7 @@ static const struct fb_videomode lynx750_ext[] = {
/* no hardware cursor supported under version 2.6.10, kernel bug */
-static int lynxfb_ops_cursor(struct fb_info* info, struct fb_cursor* fbcursor)
+static int lynxfb_ops_cursor(struct fb_info *info, struct fb_cursor *fbcursor)
{
struct lynxfb_par *par;
struct lynxfb_crtc *crtc;
@@ -188,7 +188,7 @@ static int lynxfb_ops_cursor(struct fb_info* info, struct fb_cursor* fbcursor)
return 0;
}
-static void lynxfb_ops_fillrect(struct fb_info* info, const struct fb_fillrect* region)
+static void lynxfb_ops_fillrect(struct fb_info *info, const struct fb_fillrect *region)
{
struct lynxfb_par *par;
struct lynx_share *share;
@@ -207,7 +207,7 @@ static void lynxfb_ops_fillrect(struct fb_info* info, const struct fb_fillrect*
pitch = info->fix.line_length;
Bpp = info->var.bits_per_pixel >> 3;
- color = (Bpp == 1)?region->color:((u32*)info->pseudo_palette)[region->color];
+ color = (Bpp == 1)?region->color:((u32 *)info->pseudo_palette)[region->color];
rop = (region->rop != ROP_COPY) ? HW_ROP2_XOR:HW_ROP2_COPY;
myspin_lock(&share->slock);
@@ -260,8 +260,8 @@ static void lynxfb_ops_imageblit(struct fb_info *info, const struct fb_image *im
if (image->depth == 1) {
if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
- fgcol = ((u32*)info->pseudo_palette)[image->fg_color];
- bgcol = ((u32*)info->pseudo_palette)[image->bg_color];
+ fgcol = ((u32 *)info->pseudo_palette)[image->fg_color];
+ bgcol = ((u32 *)info->pseudo_palette)[image->bg_color];
} else {
fgcol = image->fg_color;
bgcol = image->bg_color;
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 9/9] staging: sm750: Add space before and after '=', ':' etc
2015-03-12 1:23 [PATCH 0/9] staging: sm750: Fix most style errors Ioana Ciornei
` (7 preceding siblings ...)
2015-03-12 1:23 ` [PATCH 8/9] staging: sm750: Place * next to identifier Ioana Ciornei
@ 2015-03-12 1:23 ` Ioana Ciornei
2015-03-12 6:24 ` [Outreachy kernel] " Julia Lawall
8 siblings, 1 reply; 14+ messages in thread
From: Ioana Ciornei @ 2015-03-12 1:23 UTC (permalink / raw)
To: outreachy-kernel; +Cc: Ioana Ciornei
Add space before and after '=', ':', '!=' etc in order to improve readability.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
---
drivers/staging/sm750fb/sm750.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index ffc977b..75d505a 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -766,7 +766,7 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
output->proc_setBLANK = (share->revid == SM750LE_REVISION_ID)?hw_sm750le_setBLANK:hw_sm750_setBLANK;
output->clear = hw_sm750_output_clear;
/* chip specific phase */
- share->accel.de_wait = (share->revid == SM750LE_REVIvSION_ID)?hw_sm750le_deWait: hw_sm750_deWait;
+ share->accel.de_wait = (share->revid == SM750LE_REVIvSION_ID)?hw_sm750le_deWait : hw_sm750_deWait;
switch (spec_share->state.dataflow) {
case sm750_simul_pri:
output->paths = sm750_pnc;
@@ -816,7 +816,7 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
return ret;
}
-static struct fb_ops lynxfb_ops={
+static struct fb_ops lynxfb_ops = {
.owner = THIS_MODULE,
.fb_check_var = lynxfb_ops_check_var,
.fb_set_par = lynxfb_ops_set_par,
@@ -1350,7 +1350,7 @@ static int __init lynxfb_setup(char *options)
strsep() updates @options to pointer after the first found token
it also returns the pointer ahead the token.
*/
- while ((opt = strsep(&options, ":"))!=NULL) {
+ while ((opt = strsep(&options, ":")) != NULL) {
/* options that mean for any lynx chips are configured here */
if (!strncmp(opt, "noaccel", strlen("noaccel")))
g_noaccel = 1;
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [Outreachy kernel] [PATCH 9/9] staging: sm750: Add space before and after '=', ':' etc
2015-03-12 1:23 ` [PATCH 9/9] staging: sm750: Add space before and after '=', ':' etc Ioana Ciornei
@ 2015-03-12 6:24 ` Julia Lawall
0 siblings, 0 replies; 14+ messages in thread
From: Julia Lawall @ 2015-03-12 6:24 UTC (permalink / raw)
To: Ioana Ciornei; +Cc: outreachy-kernel
On Thu, 12 Mar 2015, Ioana Ciornei wrote:
> Add space before and after '=', ':', '!=' etc in order to improve readability.
>
> Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
> ---
> drivers/staging/sm750fb/sm750.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
> index ffc977b..75d505a 100644
> --- a/drivers/staging/sm750fb/sm750.c
> +++ b/drivers/staging/sm750fb/sm750.c
> @@ -766,7 +766,7 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
> output->proc_setBLANK = (share->revid == SM750LE_REVISION_ID)?hw_sm750le_setBLANK:hw_sm750_setBLANK;
> output->clear = hw_sm750_output_clear;
> /* chip specific phase */
> - share->accel.de_wait = (share->revid == SM750LE_REVIvSION_ID)?hw_sm750le_deWait: hw_sm750_deWait;
> + share->accel.de_wait = (share->revid == SM750LE_REVIvSION_ID)?hw_sm750le_deWait : hw_sm750_deWait;
You could take care of ? at the same time. It may be that checkpatch
overlooks this for some reason.
julia
> switch (spec_share->state.dataflow) {
> case sm750_simul_pri:
> output->paths = sm750_pnc;
> @@ -816,7 +816,7 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
> return ret;
> }
>
> -static struct fb_ops lynxfb_ops={
> +static struct fb_ops lynxfb_ops = {
> .owner = THIS_MODULE,
> .fb_check_var = lynxfb_ops_check_var,
> .fb_set_par = lynxfb_ops_set_par,
> @@ -1350,7 +1350,7 @@ static int __init lynxfb_setup(char *options)
> strsep() updates @options to pointer after the first found token
> it also returns the pointer ahead the token.
> */
> - while ((opt = strsep(&options, ":"))!=NULL) {
> + while ((opt = strsep(&options, ":")) != NULL) {
> /* options that mean for any lynx chips are configured here */
> if (!strncmp(opt, "noaccel", strlen("noaccel")))
> g_noaccel = 1;
> --
> 1.9.1
>
> --
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
> To post to this group, send email to outreachy-kernel@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/4b3b31362eee75a1c82c29e6ca359ca85b4d540c.1426121972.git.ciorneiioana%40gmail.com.
> For more options, visit https://groups.google.com/d/optout.
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Outreachy kernel] [PATCH 7/9] staging: sm750: Remove space before ')'
2015-03-12 1:23 ` [PATCH 7/9] staging: sm750: Remove space before ')' Ioana Ciornei
@ 2015-03-12 6:26 ` Julia Lawall
0 siblings, 0 replies; 14+ messages in thread
From: Julia Lawall @ 2015-03-12 6:26 UTC (permalink / raw)
To: Ioana Ciornei; +Cc: outreachy-kernel
On Thu, 12 Mar 2015, Ioana Ciornei wrote:
> Remove space before ')' as it is prohibited by the Linux coding style.
In one case you remve a space after (. It is better to describe
everything you do.
julia
>
> Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
> ---
> drivers/staging/sm750fb/sm750.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
> index 8f12370..f5b4dae 100644
> --- a/drivers/staging/sm750fb/sm750.c
> +++ b/drivers/staging/sm750fb/sm750.c
> @@ -208,7 +208,7 @@ static void lynxfb_ops_fillrect(struct fb_info* info, const struct fb_fillrect*
> Bpp = info->var.bits_per_pixel >> 3;
>
> color = (Bpp == 1)?region->color:((u32*)info->pseudo_palette)[region->color];
> - rop = ( region->rop != ROP_COPY ) ? HW_ROP2_XOR:HW_ROP2_COPY;
> + rop = (region->rop != ROP_COPY) ? HW_ROP2_XOR:HW_ROP2_COPY;
>
> myspin_lock(&share->slock);
> share->accel.de_fillrect(&share->accel,
> @@ -699,7 +699,7 @@ static int lynxfb_ops_setcolreg(unsigned regno, unsigned red,
> }
>
>
> - if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 256 ) {
> + if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 256) {
> u32 val;
>
> if (var->bits_per_pixel == 16 ||
> @@ -1154,7 +1154,7 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
> }
>
> /* setting share structure */
> - share = (struct lynx_share * )(&(spec_share->share));
> + share = (struct lynx_share *)(&(spec_share->share));
> share->fbinfo[0] = share->fbinfo[1] = NULL;
> share->devid = pdev->device;
> share->revid = pdev->revision;
> --
> 1.9.1
>
> --
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
> To post to this group, send email to outreachy-kernel@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/dc9a353f0623e2e1ada333f76573f3417e4e8a51.1426121972.git.ciorneiioana%40gmail.com.
> For more options, visit https://groups.google.com/d/optout.
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Outreachy kernel] [PATCH 6/9] staging: sm750: Move open curly bracket on previous line
2015-03-12 1:23 ` [PATCH 6/9] staging: sm750: Move open curly bracket on previous line Ioana Ciornei
@ 2015-03-12 6:27 ` Julia Lawall
0 siblings, 0 replies; 14+ messages in thread
From: Julia Lawall @ 2015-03-12 6:27 UTC (permalink / raw)
To: Ioana Ciornei; +Cc: outreachy-kernel
On Thu, 12 Mar 2015, Ioana Ciornei wrote:
> Place curly open bracket surrounding statements blocks on the same line
> as the control flow instruction in order to follow with Linux coding style.
It looks like you have mixed two patches somehow. In several cases here
you remove a space before a semicolon.
julia
>
> Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
> ---
> drivers/staging/sm750fb/sm750.c | 48 +++++++++++++++--------------------------
> 1 file changed, 17 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
> index f6083c4..8f12370 100644
> --- a/drivers/staging/sm750fb/sm750.c
> +++ b/drivers/staging/sm750fb/sm750.c
> @@ -175,8 +175,7 @@ static int lynxfb_ops_cursor(struct fb_info* info, struct fb_cursor* fbcursor)
> }
>
>
> - if (fbcursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE))
> - {
> + if (fbcursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE)) {
> cursor->setData(cursor,
> fbcursor->rop,
> fbcursor->image.data,
> @@ -260,13 +259,10 @@ static void lynxfb_ops_imageblit(struct fb_info *info, const struct fb_image *im
>
> if (image->depth == 1) {
> if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
> - info->fix.visual == FB_VISUAL_DIRECTCOLOR)
> - {
> + info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
> fgcol = ((u32*)info->pseudo_palette)[image->fg_color];
> bgcol = ((u32*)info->pseudo_palette)[image->bg_color];
> - }
> - else
> - {
> + } else {
> fgcol = image->fg_color;
> bgcol = image->bg_color;
> }
> @@ -421,7 +417,7 @@ static int lynxfb_ops_set_par(struct fb_info *info)
> var->red.length = 8;
> var->green.offset = 8;
> var->green.length = 8;
> - var->blue.offset = 0 ;
> + var->blue.offset = 0;
> var->blue.length = 8;
> fix->visual = FB_VISUAL_TRUECOLOR;
> break;
> @@ -560,8 +556,7 @@ static int lynxfb_ops_mmap(struct fb_info *info, struct vm_area_struct *vma)
> printk("lynxfb mmap vm end: %x\n", vma->vm_end);
> printk("lynxfb mmap len: %x\n", len);
> printk("lynxfb mmap off: %x\n", off);
> - if ((vma->vm_end - vma->vm_start + off) > len)
> - {
> + if ((vma->vm_end - vma->vm_start + off) > len) {
> return -EINVAL;
> }
> off += start;
> @@ -642,7 +637,7 @@ static int lynxfb_ops_check_var(struct fb_var_screeninfo *var, struct fb_info *i
> var->red.length = 8;
> var->green.offset = 8;
> var->green.length = 8;
> - var->blue.offset = 0 ;
> + var->blue.offset = 0;
> var->blue.length = 8;
> info->fix.visual = FB_VISUAL_TRUECOLOR;
> break;
> @@ -695,8 +690,7 @@ static int lynxfb_ops_setcolreg(unsigned regno, unsigned red,
> if (info->var.grayscale)
> red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
>
> - if (var->bits_per_pixel == 8 && info->fix.visual == FB_VISUAL_PSEUDOCOLOR)
> - {
> + if (var->bits_per_pixel == 8 && info->fix.visual == FB_VISUAL_PSEUDOCOLOR) {
> red >>= 8;
> green >>= 8;
> blue >>= 8;
> @@ -705,14 +699,12 @@ static int lynxfb_ops_setcolreg(unsigned regno, unsigned red,
> }
>
>
> - if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 256 )
> - {
> + if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 256 ) {
> u32 val;
>
> if (var->bits_per_pixel == 16 ||
> var->bits_per_pixel == 32 ||
> - var->bits_per_pixel == 24)
> - {
> + var->bits_per_pixel == 24) {
> val = chan_to_field(red, &var->red);
> val |= chan_to_field(green, &var->green);
> val |= chan_to_field(blue, &var->blue);
> @@ -861,9 +853,8 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
> };
>
>
> - static const char *fixId[2]=
> - {
> - "sm750_fb1", "sm750_fb2",
> + static const char *fixId[2] = {
> + "sm750_fb1", "sm750_fb2",
> };
>
> int ret, line_length;
> @@ -924,7 +915,7 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
> }
>
>
> - for (i=0;i<3;i++) {
> + for (i = 0; i < 3; i++) {
>
> ret = fb_find_mode(var, info, g_fbmode[index],
> pdb[i], cdb[i], NULL, 8);
> @@ -1232,16 +1223,13 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
> fbidx = 0;
> ALLOC_FB:
> info[fbidx] = framebuffer_alloc(sizeof(struct lynxfb_par), &pdev->dev);
> - if (!info[fbidx])
> - {
> + if (!info[fbidx]) {
> pr_err("Could not allocate framebuffer #%d.\n", fbidx);
> if (fbidx == 0)
> goto err_info0_alloc;
> else
> goto err_info1_alloc;
> - }
> - else
> - {
> + } else {
> struct lynxfb_par *par;
>
> pr_info("framebuffer #%d alloc okay\n", fbidx);
> @@ -1362,8 +1350,7 @@ static int __init lynxfb_setup(char *options)
> strsep() updates @options to pointer after the first found token
> it also returns the pointer ahead the token.
> */
> - while ((opt = strsep(&options, ":"))!=NULL)
> - {
> + while ((opt = strsep(&options, ":"))!=NULL) {
> /* options that mean for any lynx chips are configured here */
> if (!strncmp(opt, "noaccel", strlen("noaccel")))
> g_noaccel = 1;
> @@ -1373,8 +1360,7 @@ static int __init lynxfb_setup(char *options)
> #endif
> else if (!strncmp(opt, "dual", strlen("dual")))
> g_dualview = 1;
> - else
> - {
> + else {
> strcat(tmp, opt);
> tmp += strlen(opt);
> if (options != NULL)
> @@ -1410,7 +1396,7 @@ static struct pci_driver lynxfb_driver = {
>
> static int __init lynxfb_init(void)
> {
> - char *option ;
> + char *option;
> int ret;
>
> #ifdef MODULE
> --
> 1.9.1
>
> --
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
> To post to this group, send email to outreachy-kernel@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/e915b7cd1e15db4d41555662a06b1bdc80b22ad2.1426121972.git.ciorneiioana%40gmail.com.
> For more options, visit https://groups.google.com/d/optout.
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Outreachy kernel] [PATCH 5/9] staging: sm750: Place open bracket '{' on the next line
2015-03-12 1:23 ` [PATCH 5/9] staging: sm750: Place open bracket '{' on the next line Ioana Ciornei
@ 2015-03-12 6:28 ` Julia Lawall
0 siblings, 0 replies; 14+ messages in thread
From: Julia Lawall @ 2015-03-12 6:28 UTC (permalink / raw)
To: Ioana Ciornei; +Cc: outreachy-kernel
On Thu, 12 Mar 2015, Ioana Ciornei wrote:
> Move open curly bracket on next line after the definition of a function, to follow
> the Linux coding style.
This patch has the space and semicolon changes too.
julia
>
> Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
> ---
> drivers/staging/sm750fb/sm750.c | 14 ++++++++------
> 1 file changed, 8 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
> index 6ac572c..f6083c4 100644
> --- a/drivers/staging/sm750fb/sm750.c
> +++ b/drivers/staging/sm750fb/sm750.c
> @@ -60,7 +60,8 @@ static char *g_option = NULL;
>
> /* if not use spin_lock, system will die if user load driver
> * and immediatly unload driver frequently (dual)*/
> -static inline void myspin_lock(spinlock_t *sl) {
> +static inline void myspin_lock(spinlock_t *sl)
> +{
> struct lynx_share *share;
>
> share = container_of(sl, struct lynx_share, slock);
> @@ -68,7 +69,8 @@ static inline void myspin_lock(spinlock_t *sl) {
> spin_lock(sl);
> }
>
> -static inline void myspin_unlock(spinlock_t *sl) {
> +static inline void myspin_unlock(spinlock_t *sl)
> +{
> struct lynx_share *share;
>
> share = container_of(sl, struct lynx_share, slock);
> @@ -419,7 +421,7 @@ static int lynxfb_ops_set_par(struct fb_info *info)
> var->red.length = 8;
> var->green.offset = 8;
> var->green.length = 8;
> - var->blue.offset = 0;
> + var->blue.offset = 0 ;
> var->blue.length = 8;
> fix->visual = FB_VISUAL_TRUECOLOR;
> break;
> @@ -640,7 +642,7 @@ static int lynxfb_ops_check_var(struct fb_var_screeninfo *var, struct fb_info *i
> var->red.length = 8;
> var->green.offset = 8;
> var->green.length = 8;
> - var->blue.offset = 0;
> + var->blue.offset = 0 ;
> var->blue.length = 8;
> info->fix.visual = FB_VISUAL_TRUECOLOR;
> break;
> @@ -772,7 +774,7 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
> output->proc_setBLANK = (share->revid == SM750LE_REVISION_ID)?hw_sm750le_setBLANK:hw_sm750_setBLANK;
> output->clear = hw_sm750_output_clear;
> /* chip specific phase */
> - share->accel.de_wait = (share->revid == SM750LE_REVISION_ID)?hw_sm750le_deWait: hw_sm750_deWait;
> + share->accel.de_wait = (share->revid == SM750LE_REVIvSION_ID)?hw_sm750le_deWait: hw_sm750_deWait;
> switch (spec_share->state.dataflow) {
> case sm750_simul_pri:
> output->paths = sm750_pnc;
> @@ -1408,7 +1410,7 @@ static struct pci_driver lynxfb_driver = {
>
> static int __init lynxfb_init(void)
> {
> - char *option;
> + char *option ;
> int ret;
>
> #ifdef MODULE
> --
> 1.9.1
>
> --
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
> To post to this group, send email to outreachy-kernel@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/73002c755cfd51cb124daf7f26ea81b686429f5a.1426121972.git.ciorneiioana%40gmail.com.
> For more options, visit https://groups.google.com/d/optout.
>
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2015-03-12 6:28 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-12 1:23 [PATCH 0/9] staging: sm750: Fix most style errors Ioana Ciornei
2015-03-12 1:23 ` [PATCH 1/9] staging: sm750: Place space before after control flow instructions Ioana Ciornei
2015-03-12 1:23 ` [PATCH 2/9] staging: sm750: Add space before open bracket '{' Ioana Ciornei
2015-03-12 1:23 ` [PATCH 3/9] staging: sm750: Place space before and after curly brackets Ioana Ciornei
2015-03-12 1:23 ` [PATCH 4/9] staging: sm750: Remove space before semicolon Ioana Ciornei
2015-03-12 1:23 ` [PATCH 5/9] staging: sm750: Place open bracket '{' on the next line Ioana Ciornei
2015-03-12 6:28 ` [Outreachy kernel] " Julia Lawall
2015-03-12 1:23 ` [PATCH 6/9] staging: sm750: Move open curly bracket on previous line Ioana Ciornei
2015-03-12 6:27 ` [Outreachy kernel] " Julia Lawall
2015-03-12 1:23 ` [PATCH 7/9] staging: sm750: Remove space before ')' Ioana Ciornei
2015-03-12 6:26 ` [Outreachy kernel] " Julia Lawall
2015-03-12 1:23 ` [PATCH 8/9] staging: sm750: Place * next to identifier Ioana Ciornei
2015-03-12 1:23 ` [PATCH 9/9] staging: sm750: Add space before and after '=', ':' etc Ioana Ciornei
2015-03-12 6:24 ` [Outreachy kernel] " Julia Lawall
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.