* RGW + erasure coding @ 2015-05-06 1:35 Somnath Roy [not found] ` <755F6B91B3BE364F9BCA11EA3F9E0C6F2CD86F12-cXZ6iGhjG0il5HHZYNR2WTJ2aSJ780jGSxCzGc5ayCJWk0Htik3J/w@public.gmane.org> 0 siblings, 1 reply; 3+ messages in thread From: Somnath Roy @ 2015-05-06 1:35 UTC (permalink / raw) To: ceph-users, ceph-devel Hi, I am planning to setup RGW on top of Erasure coded pool. RGW stores all of its data in the .rgw.buckets pool and I am planning to configure this pool as erasure-coded. I think configuring all other rgw pools as replicated should be fine as they don't store lot of data. Please let me know if I am missing anything, any comments/suggestion/performance tuning insight on this will be very helpful. Thanks & Regards Somnath ________________________________ PLEASE NOTE: The information contained in this electronic mail message is intended only for the use of the designated recipient(s) named above. If the reader of this message is not the intended recipient, you are hereby notified that you have received this message in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify the sender by telephone or e-mail (as shown above) immediately and destroy any and all copies of this message in your possession (whether hard copies or electronically stored copies). ^ permalink raw reply [flat|nested] 3+ messages in thread
[parent not found: <755F6B91B3BE364F9BCA11EA3F9E0C6F2CD86F12-cXZ6iGhjG0il5HHZYNR2WTJ2aSJ780jGSxCzGc5ayCJWk0Htik3J/w@public.gmane.org>]
* Re: RGW + erasure coding [not found] ` <755F6B91B3BE364F9BCA11EA3F9E0C6F2CD86F12-cXZ6iGhjG0il5HHZYNR2WTJ2aSJ780jGSxCzGc5ayCJWk0Htik3J/w@public.gmane.org> @ 2015-05-06 1:48 ` Italo Santos [not found] ` <ABACEE296F334616AE79B9075D49C8D1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 0 siblings, 1 reply; 3+ messages in thread From: Italo Santos @ 2015-05-06 1:48 UTC (permalink / raw) To: Somnath Roy; +Cc: ceph-users@lists.ceph.com, ceph-devel [-- Attachment #1.1: Type: text/plain, Size: 1809 bytes --] I use RGW with the .rgw.bucktes as EC pool and works fine as well, I’m able to reach ~300MB/s using a physical RGW server with 4 OSD nodes with SAS 10K drives w/out SSD journal. Also, I’ve tested create all other pools as EC pool too but RGW daemon doesn’t start, so I realised that the only pool should be EC was the data pool (.rgw.buckets) Regards. Italo Santos http://italosantos.com.br/ On Tuesday, May 5, 2015 at 22:35, Somnath Roy wrote: > Hi, > I am planning to setup RGW on top of Erasure coded pool. RGW stores all of its data in the .rgw.buckets pool and I am planning to configure this pool as erasure-coded. I think configuring all other rgw pools as replicated should be fine as they don't store lot of data. > Please let me know if I am missing anything, any comments/suggestion/performance tuning insight on this will be very helpful. > > Thanks & Regards > Somnath > > ________________________________ > > PLEASE NOTE: The information contained in this electronic mail message is intended only for the use of the designated recipient(s) named above. If the reader of this message is not the intended recipient, you are hereby notified that you have received this message in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify the sender by telephone or e-mail (as shown above) immediately and destroy any and all copies of this message in your possession (whether hard copies or electronically stored copies). > > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com (mailto:ceph-users@lists.ceph.com) > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > [-- Attachment #1.2: Type: text/html, Size: 2901 bytes --] [-- Attachment #2: Type: text/plain, Size: 178 bytes --] _______________________________________________ ceph-users mailing list ceph-users-idqoXFIVOFJgJs9I8MT0rw@public.gmane.org http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com ^ permalink raw reply [flat|nested] 3+ messages in thread
[parent not found: <ABACEE296F334616AE79B9075D49C8D1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* Re: RGW + erasure coding [not found] ` <ABACEE296F334616AE79B9075D49C8D1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2015-05-06 4:27 ` Somnath Roy 0 siblings, 0 replies; 3+ messages in thread From: Somnath Roy @ 2015-05-06 4:27 UTC (permalink / raw) To: Italo Santos; +Cc: ceph-users-idqoXFIVOFJgJs9I8MT0rw, ceph-devel [-- Attachment #1.1: Type: text/plain, Size: 2181 bytes --] Thanks for the information Italo. I think RGW should support all the pools on top of EC backend, not sure this is because of bucket-index sharding or not. You should probably raise a defect in the community. Regards Somnath From: Italo Santos [mailto:okdokk@gmail.com] Sent: Tuesday, May 05, 2015 6:49 PM To: Somnath Roy Cc: ceph-users@lists.ceph.com; ceph-devel Subject: Re: [ceph-users] RGW + erasure coding I use RGW with the .rgw.bucktes as EC pool and works fine as well, I’m able to reach ~300MB/s using a physical RGW server with 4 OSD nodes with SAS 10K drives w/out SSD journal. Also, I’ve tested create all other pools as EC pool too but RGW daemon doesn’t start, so I realised that the only pool should be EC was the data pool (.rgw.buckets) Regards. Italo Santos http://italosantos.com.br/ On Tuesday, May 5, 2015 at 22:35, Somnath Roy wrote: Hi, I am planning to setup RGW on top of Erasure coded pool. RGW stores all of its data in the .rgw.buckets pool and I am planning to configure this pool as erasure-coded. I think configuring all other rgw pools as replicated should be fine as they don't store lot of data. Please let me know if I am missing anything, any comments/suggestion/performance tuning insight on this will be very helpful. Thanks & Regards Somnath ________________________________ PLEASE NOTE: The information contained in this electronic mail message is intended only for the use of the designated recipient(s) named above. If the reader of this message is not the intended recipient, you are hereby notified that you have received this message in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify the sender by telephone or e-mail (as shown above) immediately and destroy any and all copies of this message in your possession (whether hard copies or electronically stored copies). _______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com<mailto:ceph-users@lists.ceph.com> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com [-- Attachment #1.2: Type: text/html, Size: 7024 bytes --] [-- Attachment #2: Type: text/plain, Size: 178 bytes --] _______________________________________________ ceph-users mailing list ceph-users-idqoXFIVOFJgJs9I8MT0rw@public.gmane.org http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-05-06 4:27 UTC | newest] Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2015-05-06 1:35 RGW + erasure coding Somnath Roy [not found] ` <755F6B91B3BE364F9BCA11EA3F9E0C6F2CD86F12-cXZ6iGhjG0il5HHZYNR2WTJ2aSJ780jGSxCzGc5ayCJWk0Htik3J/w@public.gmane.org> 2015-05-06 1:48 ` Italo Santos [not found] ` <ABACEE296F334616AE79B9075D49C8D1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2015-05-06 4:27 ` Somnath Roy
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.