* [PATCH 0/3] TI-SoC-thermal: Fine-tuning for two functions
@ 2017-04-26 15:33 ` SF Markus Elfring
0 siblings, 0 replies; 25+ messages in thread
From: SF Markus Elfring @ 2017-04-26 15:33 UTC (permalink / raw)
To: linux-pm, linux-omap, Eduardo Valentin, Keerthy, Zhang Rui
Cc: LKML, kernel-janitors
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Wed, 26 Apr 2017 17:24:56 +0200
Three update suggestions were taken into account
from static source code analysis.
Markus Elfring (3):
Use devm_kcalloc() in ti_bandgap_build()
Delete error messages for failed memory allocations in ti_bandgap_build()
Fix a typo in a comment line
drivers/thermal/ti-soc-thermal/ti-bandgap.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
--
2.12.2
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH 0/3] TI-SoC-thermal: Fine-tuning for two functions
@ 2017-04-26 15:33 ` SF Markus Elfring
0 siblings, 0 replies; 25+ messages in thread
From: SF Markus Elfring @ 2017-04-26 15:33 UTC (permalink / raw)
To: linux-pm, linux-omap, Eduardo Valentin, Keerthy, Zhang Rui
Cc: LKML, kernel-janitors
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Wed, 26 Apr 2017 17:24:56 +0200
Three update suggestions were taken into account
from static source code analysis.
Markus Elfring (3):
Use devm_kcalloc() in ti_bandgap_build()
Delete error messages for failed memory allocations in ti_bandgap_build()
Fix a typo in a comment line
drivers/thermal/ti-soc-thermal/ti-bandgap.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
--
2.12.2
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH 1/3] ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build()
2017-04-26 15:33 ` SF Markus Elfring
@ 2017-04-26 15:34 ` SF Markus Elfring
-1 siblings, 0 replies; 25+ messages in thread
From: SF Markus Elfring @ 2017-04-26 15:34 UTC (permalink / raw)
To: linux-pm, linux-omap, Eduardo Valentin, Keerthy, Zhang Rui
Cc: LKML, kernel-janitors
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Wed, 26 Apr 2017 16:45:25 +0200
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "devm_kcalloc".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
drivers/thermal/ti-soc-thermal/ti-bandgap.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index ba9c302454fb..f19cb7612a65 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -1224,8 +1224,8 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
bgp->conf = of_id->data;
/* register shadow for context save and restore */
- bgp->regval = devm_kzalloc(&pdev->dev, sizeof(*bgp->regval) *
- bgp->conf->sensor_count, GFP_KERNEL);
+ bgp->regval = devm_kcalloc(&pdev->dev, bgp->conf->sensor_count,
+ sizeof(*bgp->regval), GFP_KERNEL);
if (!bgp->regval) {
dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
return ERR_PTR(-ENOMEM);
--
2.12.2
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 1/3] ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build()
@ 2017-04-26 15:34 ` SF Markus Elfring
0 siblings, 0 replies; 25+ messages in thread
From: SF Markus Elfring @ 2017-04-26 15:34 UTC (permalink / raw)
To: linux-pm, linux-omap, Eduardo Valentin, Keerthy, Zhang Rui
Cc: LKML, kernel-janitors
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Wed, 26 Apr 2017 16:45:25 +0200
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "devm_kcalloc".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
drivers/thermal/ti-soc-thermal/ti-bandgap.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index ba9c302454fb..f19cb7612a65 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -1224,8 +1224,8 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
bgp->conf = of_id->data;
/* register shadow for context save and restore */
- bgp->regval = devm_kzalloc(&pdev->dev, sizeof(*bgp->regval) *
- bgp->conf->sensor_count, GFP_KERNEL);
+ bgp->regval = devm_kcalloc(&pdev->dev, bgp->conf->sensor_count,
+ sizeof(*bgp->regval), GFP_KERNEL);
if (!bgp->regval) {
dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
return ERR_PTR(-ENOMEM);
--
2.12.2
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 2/3] ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build()
2017-04-26 15:33 ` SF Markus Elfring
@ 2017-04-26 15:37 ` SF Markus Elfring
-1 siblings, 0 replies; 25+ messages in thread
From: SF Markus Elfring @ 2017-04-26 15:37 UTC (permalink / raw)
To: linux-pm, linux-omap, Eduardo Valentin, Keerthy, Zhang Rui
Cc: LKML, kernel-janitors, Wolfram Sang
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Wed, 26 Apr 2017 17:03:07 +0200
The script "checkpatch.pl" pointed information out like the following.
WARNING: Possible unnecessary 'out of memory' message
Thus remove such statements here.
Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
drivers/thermal/ti-soc-thermal/ti-bandgap.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index f19cb7612a65..109fb0a5f19f 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -1217,7 +1217,5 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
- if (!bgp) {
- dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
+ if (!bgp)
return ERR_PTR(-ENOMEM);
- }
of_id = of_match_device(of_ti_bandgap_match, &pdev->dev);
if (of_id)
@@ -1229,7 +1227,5 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
- if (!bgp->regval) {
- dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
+ if (!bgp->regval)
return ERR_PTR(-ENOMEM);
- }
i = 0;
do {
--
2.12.2
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 2/3] ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build(
@ 2017-04-26 15:37 ` SF Markus Elfring
0 siblings, 0 replies; 25+ messages in thread
From: SF Markus Elfring @ 2017-04-26 15:37 UTC (permalink / raw)
To: linux-pm, linux-omap, Eduardo Valentin, Keerthy, Zhang Rui
Cc: LKML, kernel-janitors, Wolfram Sang
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Wed, 26 Apr 2017 17:03:07 +0200
The script "checkpatch.pl" pointed information out like the following.
WARNING: Possible unnecessary 'out of memory' message
Thus remove such statements here.
Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
drivers/thermal/ti-soc-thermal/ti-bandgap.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index f19cb7612a65..109fb0a5f19f 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -1217,7 +1217,5 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
- if (!bgp) {
- dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
+ if (!bgp)
return ERR_PTR(-ENOMEM);
- }
of_id = of_match_device(of_ti_bandgap_match, &pdev->dev);
if (of_id)
@@ -1229,7 +1227,5 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
- if (!bgp->regval) {
- dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
+ if (!bgp->regval)
return ERR_PTR(-ENOMEM);
- }
i = 0;
do {
--
2.12.2
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 3/3] ti-soc-thermal: Fix a typo in a comment line
2017-04-26 15:33 ` SF Markus Elfring
@ 2017-04-26 15:39 ` SF Markus Elfring
-1 siblings, 0 replies; 25+ messages in thread
From: SF Markus Elfring @ 2017-04-26 15:39 UTC (permalink / raw)
To: linux-pm, linux-omap, Eduardo Valentin, Keerthy, Zhang Rui
Cc: LKML, kernel-janitors
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Wed, 26 Apr 2017 17:11:28 +0200
Add a missing character in this description for a function.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
drivers/thermal/ti-soc-thermal/ti-bandgap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index 109fb0a5f19f..696ab3046b87 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -1010,7 +1010,7 @@ ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
}
/**
- * ti_bandgap_set_continous_mode() - One time enabling of continuous mode
+ * ti_bandgap_set_continuous_mode() - One time enabling of continuous mode
* @bgp: pointer to struct ti_bandgap
*
* Call this function only if HAS(MODE_CONFIG) is set. As this driver may
--
2.12.2
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 3/3] ti-soc-thermal: Fix a typo in a comment line
@ 2017-04-26 15:39 ` SF Markus Elfring
0 siblings, 0 replies; 25+ messages in thread
From: SF Markus Elfring @ 2017-04-26 15:39 UTC (permalink / raw)
To: linux-pm, linux-omap, Eduardo Valentin, Keerthy, Zhang Rui
Cc: LKML, kernel-janitors
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Wed, 26 Apr 2017 17:11:28 +0200
Add a missing character in this description for a function.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
drivers/thermal/ti-soc-thermal/ti-bandgap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index 109fb0a5f19f..696ab3046b87 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -1010,7 +1010,7 @@ ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
}
/**
- * ti_bandgap_set_continous_mode() - One time enabling of continuous mode
+ * ti_bandgap_set_continuous_mode() - One time enabling of continuous mode
* @bgp: pointer to struct ti_bandgap
*
* Call this function only if HAS(MODE_CONFIG) is set. As this driver may
--
2.12.2
^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [PATCH 0/3] TI-SoC-thermal: Fine-tuning for two functions
2017-04-26 15:33 ` SF Markus Elfring
@ 2017-04-27 16:20 ` Eduardo Valentin
-1 siblings, 0 replies; 25+ messages in thread
From: Eduardo Valentin @ 2017-04-27 16:20 UTC (permalink / raw)
To: SF Markus Elfring, Keerthy
Cc: linux-pm, linux-omap, Zhang Rui, LKML, kernel-janitors
[-- Attachment #1: Type: text/plain, Size: 792 bytes --]
On Wed, Apr 26, 2017 at 05:33:10PM +0200, SF Markus Elfring wrote:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Wed, 26 Apr 2017 17:24:56 +0200
>
> Three update suggestions were taken into account
> from static source code analysis.
>
> Markus Elfring (3):
> Use devm_kcalloc() in ti_bandgap_build()
> Delete error messages for failed memory allocations in ti_bandgap_build()
> Fix a typo in a comment line
>
Keerthy,
Can you please give it a shot of this series on all supported OMAP chip
boards? I do not see any major issue with the series at all, but would
like to get it tested by you.
BR,
> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 14 +++++---------
> 1 file changed, 5 insertions(+), 9 deletions(-)
>
> --
> 2.12.2
>
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/3] TI-SoC-thermal: Fine-tuning for two functions
@ 2017-04-27 16:20 ` Eduardo Valentin
0 siblings, 0 replies; 25+ messages in thread
From: Eduardo Valentin @ 2017-04-27 16:20 UTC (permalink / raw)
To: SF Markus Elfring, Keerthy
Cc: linux-pm, linux-omap, Zhang Rui, LKML, kernel-janitors
[-- Attachment #1: Type: text/plain, Size: 792 bytes --]
On Wed, Apr 26, 2017 at 05:33:10PM +0200, SF Markus Elfring wrote:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Wed, 26 Apr 2017 17:24:56 +0200
>
> Three update suggestions were taken into account
> from static source code analysis.
>
> Markus Elfring (3):
> Use devm_kcalloc() in ti_bandgap_build()
> Delete error messages for failed memory allocations in ti_bandgap_build()
> Fix a typo in a comment line
>
Keerthy,
Can you please give it a shot of this series on all supported OMAP chip
boards? I do not see any major issue with the series at all, but would
like to get it tested by you.
BR,
> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 14 +++++---------
> 1 file changed, 5 insertions(+), 9 deletions(-)
>
> --
> 2.12.2
>
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/3] TI-SoC-thermal: Fine-tuning for two functions
2017-04-27 16:20 ` Eduardo Valentin
(?)
@ 2017-05-01 5:20 ` Keerthy
-1 siblings, 0 replies; 25+ messages in thread
From: Keerthy @ 2017-05-01 5:20 UTC (permalink / raw)
To: Eduardo Valentin, SF Markus Elfring
Cc: linux-pm, linux-omap, Zhang Rui, LKML, kernel-janitors
On Thursday 27 April 2017 09:50 PM, Eduardo Valentin wrote:
> On Wed, Apr 26, 2017 at 05:33:10PM +0200, SF Markus Elfring wrote:
>> From: Markus Elfring <elfring@users.sourceforge.net>
>> Date: Wed, 26 Apr 2017 17:24:56 +0200
>>
>> Three update suggestions were taken into account
>> from static source code analysis.
>>
>> Markus Elfring (3):
>> Use devm_kcalloc() in ti_bandgap_build()
>> Delete error messages for failed memory allocations in ti_bandgap_build()
>> Fix a typo in a comment line
>>
>
> Keerthy,
>
> Can you please give it a shot of this series on all supported OMAP chip
> boards? I do not see any major issue with the series at all, but would
> like to get it tested by you.
Sure Eduardo. I will test and review this series.
>
> BR,
>
>> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 14 +++++---------
>> 1 file changed, 5 insertions(+), 9 deletions(-)
>>
>> --
>> 2.12.2
>>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/3] TI-SoC-thermal: Fine-tuning for two functions
@ 2017-05-01 5:20 ` Keerthy
0 siblings, 0 replies; 25+ messages in thread
From: Keerthy @ 2017-05-01 5:20 UTC (permalink / raw)
To: Eduardo Valentin, SF Markus Elfring
Cc: linux-pm, linux-omap, Zhang Rui, LKML, kernel-janitors
On Thursday 27 April 2017 09:50 PM, Eduardo Valentin wrote:
> On Wed, Apr 26, 2017 at 05:33:10PM +0200, SF Markus Elfring wrote:
>> From: Markus Elfring <elfring@users.sourceforge.net>
>> Date: Wed, 26 Apr 2017 17:24:56 +0200
>>
>> Three update suggestions were taken into account
>> from static source code analysis.
>>
>> Markus Elfring (3):
>> Use devm_kcalloc() in ti_bandgap_build()
>> Delete error messages for failed memory allocations in ti_bandgap_build()
>> Fix a typo in a comment line
>>
>
> Keerthy,
>
> Can you please give it a shot of this series on all supported OMAP chip
> boards? I do not see any major issue with the series at all, but would
> like to get it tested by you.
Sure Eduardo. I will test and review this series.
>
> BR,
>
>> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 14 +++++---------
>> 1 file changed, 5 insertions(+), 9 deletions(-)
>>
>> --
>> 2.12.2
>>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/3] TI-SoC-thermal: Fine-tuning for two functions
@ 2017-05-01 5:20 ` Keerthy
0 siblings, 0 replies; 25+ messages in thread
From: Keerthy @ 2017-05-01 5:32 UTC (permalink / raw)
To: Eduardo Valentin, SF Markus Elfring
Cc: linux-pm, linux-omap, Zhang Rui, LKML, kernel-janitors
On Thursday 27 April 2017 09:50 PM, Eduardo Valentin wrote:
> On Wed, Apr 26, 2017 at 05:33:10PM +0200, SF Markus Elfring wrote:
>> From: Markus Elfring <elfring@users.sourceforge.net>
>> Date: Wed, 26 Apr 2017 17:24:56 +0200
>>
>> Three update suggestions were taken into account
>> from static source code analysis.
>>
>> Markus Elfring (3):
>> Use devm_kcalloc() in ti_bandgap_build()
>> Delete error messages for failed memory allocations in ti_bandgap_build()
>> Fix a typo in a comment line
>>
>
> Keerthy,
>
> Can you please give it a shot of this series on all supported OMAP chip
> boards? I do not see any major issue with the series at all, but would
> like to get it tested by you.
Sure Eduardo. I will test and review this series.
>
> BR,
>
>> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 14 +++++---------
>> 1 file changed, 5 insertions(+), 9 deletions(-)
>>
>> --
>> 2.12.2
>>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 3/3] ti-soc-thermal: Fix a typo in a comment line
2017-04-26 15:39 ` SF Markus Elfring
(?)
@ 2017-05-02 3:51 ` Keerthy
-1 siblings, 0 replies; 25+ messages in thread
From: Keerthy @ 2017-05-02 3:51 UTC (permalink / raw)
To: SF Markus Elfring, linux-pm, linux-omap, Eduardo Valentin, Zhang Rui
Cc: LKML, kernel-janitors
On Wednesday 26 April 2017 09:09 PM, SF Markus Elfring wrote:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Wed, 26 Apr 2017 17:11:28 +0200
>
> Add a missing character in this description for a function.
Reviewed-by: Keerthy <j-keerthy@ti.com>
>
> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
> ---
> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> index 109fb0a5f19f..696ab3046b87 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> @@ -1010,7 +1010,7 @@ ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
> }
>
> /**
> - * ti_bandgap_set_continous_mode() - One time enabling of continuous mode
> + * ti_bandgap_set_continuous_mode() - One time enabling of continuous mode
> * @bgp: pointer to struct ti_bandgap
> *
> * Call this function only if HAS(MODE_CONFIG) is set. As this driver may
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 3/3] ti-soc-thermal: Fix a typo in a comment line
@ 2017-05-02 3:51 ` Keerthy
0 siblings, 0 replies; 25+ messages in thread
From: Keerthy @ 2017-05-02 3:51 UTC (permalink / raw)
To: SF Markus Elfring, linux-pm, linux-omap, Eduardo Valentin, Zhang Rui
Cc: LKML, kernel-janitors
On Wednesday 26 April 2017 09:09 PM, SF Markus Elfring wrote:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Wed, 26 Apr 2017 17:11:28 +0200
>
> Add a missing character in this description for a function.
Reviewed-by: Keerthy <j-keerthy@ti.com>
>
> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
> ---
> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> index 109fb0a5f19f..696ab3046b87 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> @@ -1010,7 +1010,7 @@ ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
> }
>
> /**
> - * ti_bandgap_set_continous_mode() - One time enabling of continuous mode
> + * ti_bandgap_set_continuous_mode() - One time enabling of continuous mode
> * @bgp: pointer to struct ti_bandgap
> *
> * Call this function only if HAS(MODE_CONFIG) is set. As this driver may
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 3/3] ti-soc-thermal: Fix a typo in a comment line
@ 2017-05-02 3:51 ` Keerthy
0 siblings, 0 replies; 25+ messages in thread
From: Keerthy @ 2017-05-02 3:52 UTC (permalink / raw)
To: SF Markus Elfring, linux-pm, linux-omap, Eduardo Valentin, Zhang Rui
Cc: LKML, kernel-janitors
On Wednesday 26 April 2017 09:09 PM, SF Markus Elfring wrote:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Wed, 26 Apr 2017 17:11:28 +0200
>
> Add a missing character in this description for a function.
Reviewed-by: Keerthy <j-keerthy@ti.com>
>
> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
> ---
> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> index 109fb0a5f19f..696ab3046b87 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> @@ -1010,7 +1010,7 @@ ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
> }
>
> /**
> - * ti_bandgap_set_continous_mode() - One time enabling of continuous mode
> + * ti_bandgap_set_continuous_mode() - One time enabling of continuous mode
> * @bgp: pointer to struct ti_bandgap
> *
> * Call this function only if HAS(MODE_CONFIG) is set. As this driver may
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 2/3] ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build()
2017-04-26 15:37 ` [PATCH 2/3] ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build( SF Markus Elfring
(?)
@ 2017-05-02 3:52 ` Keerthy
-1 siblings, 0 replies; 25+ messages in thread
From: Keerthy @ 2017-05-02 3:52 UTC (permalink / raw)
To: SF Markus Elfring, linux-pm, linux-omap, Eduardo Valentin, Zhang Rui
Cc: LKML, kernel-janitors, Wolfram Sang
On Wednesday 26 April 2017 09:07 PM, SF Markus Elfring wrote:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Wed, 26 Apr 2017 17:03:07 +0200
>
> The script "checkpatch.pl" pointed information out like the following.
>
> WARNING: Possible unnecessary 'out of memory' message
>
> Thus remove such statements here.
Reviewed-by: Keerthy <j-keerthy@ti.com>
>
> Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf
> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
> ---
> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 8 ++------
> 1 file changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> index f19cb7612a65..109fb0a5f19f 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> @@ -1217,7 +1217,5 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
> - if (!bgp) {
> - dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
> + if (!bgp)
> return ERR_PTR(-ENOMEM);
> - }
>
> of_id = of_match_device(of_ti_bandgap_match, &pdev->dev);
> if (of_id)
> @@ -1229,7 +1227,5 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
> - if (!bgp->regval) {
> - dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
> + if (!bgp->regval)
> return ERR_PTR(-ENOMEM);
> - }
>
> i = 0;
> do {
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 2/3] ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build()
@ 2017-05-02 3:52 ` Keerthy
0 siblings, 0 replies; 25+ messages in thread
From: Keerthy @ 2017-05-02 3:52 UTC (permalink / raw)
To: SF Markus Elfring, linux-pm, linux-omap, Eduardo Valentin, Zhang Rui
Cc: LKML, kernel-janitors, Wolfram Sang
On Wednesday 26 April 2017 09:07 PM, SF Markus Elfring wrote:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Wed, 26 Apr 2017 17:03:07 +0200
>
> The script "checkpatch.pl" pointed information out like the following.
>
> WARNING: Possible unnecessary 'out of memory' message
>
> Thus remove such statements here.
Reviewed-by: Keerthy <j-keerthy@ti.com>
>
> Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf
> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
> ---
> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 8 ++------
> 1 file changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> index f19cb7612a65..109fb0a5f19f 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> @@ -1217,7 +1217,5 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
> - if (!bgp) {
> - dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
> + if (!bgp)
> return ERR_PTR(-ENOMEM);
> - }
>
> of_id = of_match_device(of_ti_bandgap_match, &pdev->dev);
> if (of_id)
> @@ -1229,7 +1227,5 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
> - if (!bgp->regval) {
> - dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
> + if (!bgp->regval)
> return ERR_PTR(-ENOMEM);
> - }
>
> i = 0;
> do {
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 2/3] ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_bu
@ 2017-05-02 3:52 ` Keerthy
0 siblings, 0 replies; 25+ messages in thread
From: Keerthy @ 2017-05-02 3:53 UTC (permalink / raw)
To: SF Markus Elfring, linux-pm, linux-omap, Eduardo Valentin, Zhang Rui
Cc: LKML, kernel-janitors, Wolfram Sang
On Wednesday 26 April 2017 09:07 PM, SF Markus Elfring wrote:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Wed, 26 Apr 2017 17:03:07 +0200
>
> The script "checkpatch.pl" pointed information out like the following.
>
> WARNING: Possible unnecessary 'out of memory' message
>
> Thus remove such statements here.
Reviewed-by: Keerthy <j-keerthy@ti.com>
>
> Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf
> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
> ---
> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 8 ++------
> 1 file changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> index f19cb7612a65..109fb0a5f19f 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> @@ -1217,7 +1217,5 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
> - if (!bgp) {
> - dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
> + if (!bgp)
> return ERR_PTR(-ENOMEM);
> - }
>
> of_id = of_match_device(of_ti_bandgap_match, &pdev->dev);
> if (of_id)
> @@ -1229,7 +1227,5 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
> - if (!bgp->regval) {
> - dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
> + if (!bgp->regval)
> return ERR_PTR(-ENOMEM);
> - }
>
> i = 0;
> do {
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 1/3] ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build()
2017-04-26 15:34 ` SF Markus Elfring
(?)
@ 2017-05-02 3:55 ` Keerthy
-1 siblings, 0 replies; 25+ messages in thread
From: Keerthy @ 2017-05-02 3:55 UTC (permalink / raw)
To: SF Markus Elfring, linux-pm, linux-omap, Eduardo Valentin, Zhang Rui
Cc: LKML, kernel-janitors
On Wednesday 26 April 2017 09:04 PM, SF Markus Elfring wrote:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Wed, 26 Apr 2017 16:45:25 +0200
>
> A multiplication for the size determination of a memory allocation
> indicated that an array data structure should be processed.
> Thus use the corresponding function "devm_kcalloc".
Reviewed-by: Keerthy <j-keerthy@ti.com>
>
> This issue was detected by using the Coccinelle software.
>
> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
> ---
> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> index ba9c302454fb..f19cb7612a65 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> @@ -1224,8 +1224,8 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
> bgp->conf = of_id->data;
>
> /* register shadow for context save and restore */
> - bgp->regval = devm_kzalloc(&pdev->dev, sizeof(*bgp->regval) *
> - bgp->conf->sensor_count, GFP_KERNEL);
> + bgp->regval = devm_kcalloc(&pdev->dev, bgp->conf->sensor_count,
> + sizeof(*bgp->regval), GFP_KERNEL);
> if (!bgp->regval) {
> dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
> return ERR_PTR(-ENOMEM);
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 1/3] ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build()
@ 2017-05-02 3:55 ` Keerthy
0 siblings, 0 replies; 25+ messages in thread
From: Keerthy @ 2017-05-02 3:55 UTC (permalink / raw)
To: SF Markus Elfring, linux-pm, linux-omap, Eduardo Valentin, Zhang Rui
Cc: LKML, kernel-janitors
On Wednesday 26 April 2017 09:04 PM, SF Markus Elfring wrote:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Wed, 26 Apr 2017 16:45:25 +0200
>
> A multiplication for the size determination of a memory allocation
> indicated that an array data structure should be processed.
> Thus use the corresponding function "devm_kcalloc".
Reviewed-by: Keerthy <j-keerthy@ti.com>
>
> This issue was detected by using the Coccinelle software.
>
> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
> ---
> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> index ba9c302454fb..f19cb7612a65 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> @@ -1224,8 +1224,8 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
> bgp->conf = of_id->data;
>
> /* register shadow for context save and restore */
> - bgp->regval = devm_kzalloc(&pdev->dev, sizeof(*bgp->regval) *
> - bgp->conf->sensor_count, GFP_KERNEL);
> + bgp->regval = devm_kcalloc(&pdev->dev, bgp->conf->sensor_count,
> + sizeof(*bgp->regval), GFP_KERNEL);
> if (!bgp->regval) {
> dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
> return ERR_PTR(-ENOMEM);
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 1/3] ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build()
@ 2017-05-02 3:55 ` Keerthy
0 siblings, 0 replies; 25+ messages in thread
From: Keerthy @ 2017-05-02 3:57 UTC (permalink / raw)
To: SF Markus Elfring, linux-pm, linux-omap, Eduardo Valentin, Zhang Rui
Cc: LKML, kernel-janitors
On Wednesday 26 April 2017 09:04 PM, SF Markus Elfring wrote:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Wed, 26 Apr 2017 16:45:25 +0200
>
> A multiplication for the size determination of a memory allocation
> indicated that an array data structure should be processed.
> Thus use the corresponding function "devm_kcalloc".
Reviewed-by: Keerthy <j-keerthy@ti.com>
>
> This issue was detected by using the Coccinelle software.
>
> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
> ---
> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> index ba9c302454fb..f19cb7612a65 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> @@ -1224,8 +1224,8 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
> bgp->conf = of_id->data;
>
> /* register shadow for context save and restore */
> - bgp->regval = devm_kzalloc(&pdev->dev, sizeof(*bgp->regval) *
> - bgp->conf->sensor_count, GFP_KERNEL);
> + bgp->regval = devm_kcalloc(&pdev->dev, bgp->conf->sensor_count,
> + sizeof(*bgp->regval), GFP_KERNEL);
> if (!bgp->regval) {
> dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
> return ERR_PTR(-ENOMEM);
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/3] TI-SoC-thermal: Fine-tuning for two functions
2017-05-01 5:20 ` Keerthy
(?)
@ 2017-05-02 4:55 ` Keerthy
-1 siblings, 0 replies; 25+ messages in thread
From: Keerthy @ 2017-05-02 4:55 UTC (permalink / raw)
To: Eduardo Valentin, SF Markus Elfring
Cc: linux-pm, linux-omap, Zhang Rui, LKML, kernel-janitors
On Monday 01 May 2017 10:50 AM, Keerthy wrote:
>
>
> On Thursday 27 April 2017 09:50 PM, Eduardo Valentin wrote:
>> On Wed, Apr 26, 2017 at 05:33:10PM +0200, SF Markus Elfring wrote:
>>> From: Markus Elfring <elfring@users.sourceforge.net>
>>> Date: Wed, 26 Apr 2017 17:24:56 +0200
>>>
>>> Three update suggestions were taken into account
>>> from static source code analysis.
>>>
>>> Markus Elfring (3):
>>> Use devm_kcalloc() in ti_bandgap_build()
>>> Delete error messages for failed memory allocations in ti_bandgap_build()
>>> Fix a typo in a comment line
>>>
>>
>> Keerthy,
>>
>> Can you please give it a shot of this series on all supported OMAP chip
>> boards? I do not see any major issue with the series at all, but would
>> like to get it tested by you.
>
> Sure Eduardo. I will test and review this series.
Tested for Temperatures of all the sensors and thermal shutdown
triggering using emul_temp on DRA7/DRA72 AM57xx-evm boards.
For the series:
Acked-by: Keerthy <j-keerthy@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
- Keerthy
>
>>
>> BR,
>>
>>> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 14 +++++---------
>>> 1 file changed, 5 insertions(+), 9 deletions(-)
>>>
>>> --
>>> 2.12.2
>>>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/3] TI-SoC-thermal: Fine-tuning for two functions
@ 2017-05-02 4:55 ` Keerthy
0 siblings, 0 replies; 25+ messages in thread
From: Keerthy @ 2017-05-02 4:55 UTC (permalink / raw)
To: Eduardo Valentin, SF Markus Elfring
Cc: linux-pm, linux-omap, Zhang Rui, LKML, kernel-janitors
On Monday 01 May 2017 10:50 AM, Keerthy wrote:
>
>
> On Thursday 27 April 2017 09:50 PM, Eduardo Valentin wrote:
>> On Wed, Apr 26, 2017 at 05:33:10PM +0200, SF Markus Elfring wrote:
>>> From: Markus Elfring <elfring@users.sourceforge.net>
>>> Date: Wed, 26 Apr 2017 17:24:56 +0200
>>>
>>> Three update suggestions were taken into account
>>> from static source code analysis.
>>>
>>> Markus Elfring (3):
>>> Use devm_kcalloc() in ti_bandgap_build()
>>> Delete error messages for failed memory allocations in ti_bandgap_build()
>>> Fix a typo in a comment line
>>>
>>
>> Keerthy,
>>
>> Can you please give it a shot of this series on all supported OMAP chip
>> boards? I do not see any major issue with the series at all, but would
>> like to get it tested by you.
>
> Sure Eduardo. I will test and review this series.
Tested for Temperatures of all the sensors and thermal shutdown
triggering using emul_temp on DRA7/DRA72 AM57xx-evm boards.
For the series:
Acked-by: Keerthy <j-keerthy@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
- Keerthy
>
>>
>> BR,
>>
>>> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 14 +++++---------
>>> 1 file changed, 5 insertions(+), 9 deletions(-)
>>>
>>> --
>>> 2.12.2
>>>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/3] TI-SoC-thermal: Fine-tuning for two functions
@ 2017-05-02 4:55 ` Keerthy
0 siblings, 0 replies; 25+ messages in thread
From: Keerthy @ 2017-05-02 4:56 UTC (permalink / raw)
To: Eduardo Valentin, SF Markus Elfring
Cc: linux-pm, linux-omap, Zhang Rui, LKML, kernel-janitors
On Monday 01 May 2017 10:50 AM, Keerthy wrote:
>
>
> On Thursday 27 April 2017 09:50 PM, Eduardo Valentin wrote:
>> On Wed, Apr 26, 2017 at 05:33:10PM +0200, SF Markus Elfring wrote:
>>> From: Markus Elfring <elfring@users.sourceforge.net>
>>> Date: Wed, 26 Apr 2017 17:24:56 +0200
>>>
>>> Three update suggestions were taken into account
>>> from static source code analysis.
>>>
>>> Markus Elfring (3):
>>> Use devm_kcalloc() in ti_bandgap_build()
>>> Delete error messages for failed memory allocations in ti_bandgap_build()
>>> Fix a typo in a comment line
>>>
>>
>> Keerthy,
>>
>> Can you please give it a shot of this series on all supported OMAP chip
>> boards? I do not see any major issue with the series at all, but would
>> like to get it tested by you.
>
> Sure Eduardo. I will test and review this series.
Tested for Temperatures of all the sensors and thermal shutdown
triggering using emul_temp on DRA7/DRA72 AM57xx-evm boards.
For the series:
Acked-by: Keerthy <j-keerthy@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
- Keerthy
>
>>
>> BR,
>>
>>> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 14 +++++---------
>>> 1 file changed, 5 insertions(+), 9 deletions(-)
>>>
>>> --
>>> 2.12.2
>>>
^ permalink raw reply [flat|nested] 25+ messages in thread
end of thread, other threads:[~2017-05-02 4:56 UTC | newest]
Thread overview: 25+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-04-26 15:33 [PATCH 0/3] TI-SoC-thermal: Fine-tuning for two functions SF Markus Elfring
2017-04-26 15:33 ` SF Markus Elfring
2017-04-26 15:34 ` [PATCH 1/3] ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build() SF Markus Elfring
2017-04-26 15:34 ` SF Markus Elfring
2017-05-02 3:55 ` Keerthy
2017-05-02 3:57 ` Keerthy
2017-05-02 3:55 ` Keerthy
2017-04-26 15:37 ` [PATCH 2/3] ti-soc-thermal: Delete error messages for failed memory allocations " SF Markus Elfring
2017-04-26 15:37 ` [PATCH 2/3] ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build( SF Markus Elfring
2017-05-02 3:52 ` [PATCH 2/3] ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build() Keerthy
2017-05-02 3:53 ` [PATCH 2/3] ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_bu Keerthy
2017-05-02 3:52 ` [PATCH 2/3] ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build() Keerthy
2017-04-26 15:39 ` [PATCH 3/3] ti-soc-thermal: Fix a typo in a comment line SF Markus Elfring
2017-04-26 15:39 ` SF Markus Elfring
2017-05-02 3:51 ` Keerthy
2017-05-02 3:52 ` Keerthy
2017-05-02 3:51 ` Keerthy
2017-04-27 16:20 ` [PATCH 0/3] TI-SoC-thermal: Fine-tuning for two functions Eduardo Valentin
2017-04-27 16:20 ` Eduardo Valentin
2017-05-01 5:20 ` Keerthy
2017-05-01 5:32 ` Keerthy
2017-05-01 5:20 ` Keerthy
2017-05-02 4:55 ` Keerthy
2017-05-02 4:56 ` Keerthy
2017-05-02 4:55 ` Keerthy
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.