* ath10k-firmware: QCA4019 hw1.0: Add EnGenius EAP1300 specific BDFs
@ 2018-10-22 10:38 steven.lin
2019-06-28 13:26 ` Kalle Valo
0 siblings, 1 reply; 2+ messages in thread
From: steven.lin @ 2018-10-22 10:38 UTC (permalink / raw)
To: ath10k
[-- Attachment #1: Type: text/plain, Size: 1083 bytes --]
Hi,
The support for this device was added a while ago to OpenWrt. This AP requires
two special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board-
id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't
provide special IDs for customers and seems to use the AP-DK board-ids in the
wifi firmware to change its behavior.
Now to the questions from the wiki page [1]:
description for what hardware this is:
- it is a IPQ4018 based board
- one QCA40xx radio is used as 2.4GHz radio
- one QCA40xx radio is used as 5GHz radio
origin of the board file (did you create it yourself or where you downloaded)
- taken from stock firmware image
ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- QCA4019 hw1.0
md5sum of each new board file to add
+ bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EAP1300'
md5sum: d7a7cb11fdb435380cb77a5a2d5c885d
+ bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-EAP1300'
md5sum: 3b286e4e6df83f1cb4a9241badd93961
Best regards,
Steven Lin
[-- Attachment #2: bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-EAP1300.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #3: bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EAP1300.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #4: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: ath10k-firmware: QCA4019 hw1.0: Add EnGenius EAP1300 specific BDFs
2018-10-22 10:38 ath10k-firmware: QCA4019 hw1.0: Add EnGenius EAP1300 specific BDFs steven.lin
@ 2019-06-28 13:26 ` Kalle Valo
0 siblings, 0 replies; 2+ messages in thread
From: Kalle Valo @ 2019-06-28 13:26 UTC (permalink / raw)
To: steven.lin; +Cc: ath10k
<steven.lin@senao.com> writes:
> The support for this device was added a while ago to OpenWrt. This AP requires
> two special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board-
> id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't
> provide special IDs for customers and seems to use the AP-DK board-ids in the
> wifi firmware to change its behavior.
>
> Now to the questions from the wiki page [1]:
>
> description for what hardware this is:
> - it is a IPQ4018 based board
> - one QCA40xx radio is used as 2.4GHz radio
> - one QCA40xx radio is used as 5GHz radio
>
> origin of the board file (did you create it yourself or where you downloaded)
> - taken from stock firmware image
>
> ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
> - QCA4019 hw1.0
>
> md5sum of each new board file to add
> + bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EAP1300'
> md5sum: d7a7cb11fdb435380cb77a5a2d5c885d
> + bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-EAP1300'
> md5sum: 3b286e4e6df83f1cb4a9241badd93961
Thanks, added to QCA4019/hw1.0/board-2.bin:
New:
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EAP1300
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-EAP1300
Changed:
Deleted:
2 board image(s) added, 0 changed, 0 deleted, 39 in total
https://github.com/kvalo/ath10k-firmware/commit/9453e34e1689e13e919547c5f31f41e725c27f71
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-06-28 13:26 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-22 10:38 ath10k-firmware: QCA4019 hw1.0: Add EnGenius EAP1300 specific BDFs steven.lin
2019-06-28 13:26 ` Kalle Valo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.