From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> To: linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH v3 04/20] ARM: shmobile: r8a7779: Add clocks Date: Wed, 26 Feb 2014 14:45:03 +0000 [thread overview] Message-ID: <7964326.0VzqzhpvEl@avalon> (raw) In-Reply-To: <1393400016-23433-5-git-send-email-horms+renesas@verge.net.au> Hi Simon, One more comment. On Wednesday 26 February 2014 16:33:20 Simon Horman wrote: > Declare all core and MSTP clocks currently used by r8a7779-based boards. > > Based on work by Laurent Pinchart for the r8a7790 and r8a7791 SoCs. > > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au> > > --- > v3 > * As suggested by Laurent Pinchart > - Add and use extal_clk > - Fix bogus status register use for MSTP clocks > - Fix bogus mstp3_cls to use its own entries rather than > that of mstp1_clks > > * Update to use "main" in cpg_clocks as per updated > binding in previous patch > * Update for new, consolidated and renamed index macros > - R8A7779_CLK_ETHER > - R8A7779_CLK_HSCIF > - R8A7779_CLK_HSPI > - R8A7779_CLK_MMC0,1 > - R8A7779_CLK_PCIE > - R8A7779_CLK_USB01,2 > --- > arch/arm/boot/dts/r8a7779.dtsi | 129 ++++++++++++++++++++++++++++++++++++++ > 1 file changed, 129 insertions(+) > > diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi > index d0561d4..240a03e 100644 > --- a/arch/arm/boot/dts/r8a7779.dtsi > +++ b/arch/arm/boot/dts/r8a7779.dtsi > @@ -11,6 +11,7 @@ > > /include/ "skeleton.dtsi" > > +#include <dt-bindings/clock/r8a7779-clock.h> > #include <dt-bindings/interrupt-controller/irq.h> > > / { > @@ -278,4 +279,132 @@ > interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; > status = "disabled"; > }; > + > + clocks { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + /* External root clock */ > + extal_clk: extal_clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + /* This value must be overriden by the board. */ > + clock-frequency = <0>; > + clock-output-names = "extal"; > + }; > + > + /* Special CPG clocks */ > + cpg_clocks: cpg_clocks@0xe6150000 { > + compatible = "renesas,r8a7779-cpg-clocks"; > + reg = <0 0xe6150000 0 0x1000>; Copied from H2 ? :-) This should probably be reg = <0 0xffc80000 0 0x30>; > + clocks = <&extal_clk>; > + #clock-cells = <1>; > + clock-output-names = "plla", "z", "zs", "s", > + "s1", "p", "out"; > + }; > + > + /* Fixed factor clocks */ > + i_clk: i_clk { > + compatible = "fixed-factor-clock"; > + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; > + #clock-cells = <0>; > + clock-div = <2>; > + clock-mult = <1>; > + clock-output-names = "i"; > + }; > + s3_clk: s3_clk { > + compatible = "fixed-factor-clock"; > + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; > + #clock-cells = <0>; > + clock-div = <8>; > + clock-mult = <1>; > + clock-output-names = "s3"; > + }; > + s4_clk: s4_clk { > + compatible = "fixed-factor-clock"; > + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; > + #clock-cells = <0>; > + clock-div = <16>; > + clock-mult = <1>; > + clock-output-names = "s4"; > + }; > + g_clk: g_clk { > + compatible = "fixed-factor-clock"; > + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; > + #clock-cells = <0>; > + clock-div = <24>; > + clock-mult = <1>; > + clock-output-names = "g"; > + }; > + > + /* Gate clocks */ > + mstp0_clks: mstp0_clks { > + compatible = "renesas,r8a7779-mstp-clocks", "renesas,cpg-mstp- clocks"; > + reg = <0 0xffc80030 0 4>; > + clocks = <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, > <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, > <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, + > <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks > R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks > R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks > R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, > + <&cpg_clocks R8A7779_CLK_P>; > + #clock-cells = <1>; > + renesas,clock-indices = < > + R8A7779_CLK_HSPI R8A7779_CLK_TMU0 R8A7779_CLK_TMU0 > + R8A7779_CLK_TMU0 R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4 > + R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2 R8A7779_CLK_SCIF1 > + R8A7779_CLK_SCIF0 R8A7779_CLK_I2C3 R8A7779_CLK_I2C2 > + R8A7779_CLK_I2C1 R8A7779_CLK_I2C0 > + >; > + clock-output-names > + "hspi", "tmu00", "tmu01", > + "tmu02", "scif5", "scif4", > + "scif3", "scif2", "scif1", > + "scif0", "i2c3", "i2c2", > + "i2c1", "i2c0"; > + }; > + mstp1_clks: mstp1_clks { > + compatible = "renesas,r8a7779-mstp-clocks", "renesas,cpg-mstp- clocks"; > + reg = <0 0xffc80034 0 4>, <0 0xffc80044 0 4>; > + clocks = <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, > + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, > + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, > + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, > + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, > + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>; > + #clock-cells = <1>; > + renesas,clock-indices = < > + R8A7779_CLK_USB01 R8A7779_CLK_USB01 > + R8A7779_CLK_USB2 R8A7779_CLK_USB2 > + R8A7779_CLK_DU R8A7779_CLK_VIN2 > + R8A7779_CLK_VIN1 R8A7779_CLK_VIN0 > + R8A7779_CLK_ETHER R8A7779_CLK_SATA > + R8A7779_CLK_PCIE R8A7779_CLK_VIN3 > + >; > + clock-output-names > + "ehci0", "ohci0", > + "ehci1", "ohci1", > + "du", "vin2", > + "vin1", "vin0", > + "ether", "sata", > + "pcie", "vin3"; > + }; > + mstp3_clks: mstp3_clks { > + compatible = "renesas,r8a7779-mstp-clocks", "renesas,cpg-mstp- clocks"; > + reg = <0 0xffc8003c 0 4>; > + clocks = <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, > + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, > + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>; > + #clock-cells = <1>; > + renesas,clock-indices = < > + R8A7779_CLK_SDHI3 R8A7779_CLK_SDHI2 > + R8A7779_CLK_SDHI1 R8A7779_CLK_SDHI0 > + R8A7779_CLK_MMC1 R8A7779_CLK_MMC0 > + >; > + clock-output-names > + "sdhi3", "sdhi2", > + "sdhi1", "sdhi0", > + "mmc1", "mmc0"; > + }; > + }; > }; -- Regards, Laurent Pinchart
WARNING: multiple messages have this Message-ID (diff)
From: laurent.pinchart@ideasonboard.com (Laurent Pinchart) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 04/20] ARM: shmobile: r8a7779: Add clocks Date: Wed, 26 Feb 2014 15:45:03 +0100 [thread overview] Message-ID: <7964326.0VzqzhpvEl@avalon> (raw) In-Reply-To: <1393400016-23433-5-git-send-email-horms+renesas@verge.net.au> Hi Simon, One more comment. On Wednesday 26 February 2014 16:33:20 Simon Horman wrote: > Declare all core and MSTP clocks currently used by r8a7779-based boards. > > Based on work by Laurent Pinchart for the r8a7790 and r8a7791 SoCs. > > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au> > > --- > v3 > * As suggested by Laurent Pinchart > - Add and use extal_clk > - Fix bogus status register use for MSTP clocks > - Fix bogus mstp3_cls to use its own entries rather than > that of mstp1_clks > > * Update to use "main" in cpg_clocks as per updated > binding in previous patch > * Update for new, consolidated and renamed index macros > - R8A7779_CLK_ETHER > - R8A7779_CLK_HSCIF > - R8A7779_CLK_HSPI > - R8A7779_CLK_MMC0,1 > - R8A7779_CLK_PCIE > - R8A7779_CLK_USB01,2 > --- > arch/arm/boot/dts/r8a7779.dtsi | 129 ++++++++++++++++++++++++++++++++++++++ > 1 file changed, 129 insertions(+) > > diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi > index d0561d4..240a03e 100644 > --- a/arch/arm/boot/dts/r8a7779.dtsi > +++ b/arch/arm/boot/dts/r8a7779.dtsi > @@ -11,6 +11,7 @@ > > /include/ "skeleton.dtsi" > > +#include <dt-bindings/clock/r8a7779-clock.h> > #include <dt-bindings/interrupt-controller/irq.h> > > / { > @@ -278,4 +279,132 @@ > interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; > status = "disabled"; > }; > + > + clocks { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + /* External root clock */ > + extal_clk: extal_clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + /* This value must be overriden by the board. */ > + clock-frequency = <0>; > + clock-output-names = "extal"; > + }; > + > + /* Special CPG clocks */ > + cpg_clocks: cpg_clocks at 0xe6150000 { > + compatible = "renesas,r8a7779-cpg-clocks"; > + reg = <0 0xe6150000 0 0x1000>; Copied from H2 ? :-) This should probably be reg = <0 0xffc80000 0 0x30>; > + clocks = <&extal_clk>; > + #clock-cells = <1>; > + clock-output-names = "plla", "z", "zs", "s", > + "s1", "p", "out"; > + }; > + > + /* Fixed factor clocks */ > + i_clk: i_clk { > + compatible = "fixed-factor-clock"; > + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; > + #clock-cells = <0>; > + clock-div = <2>; > + clock-mult = <1>; > + clock-output-names = "i"; > + }; > + s3_clk: s3_clk { > + compatible = "fixed-factor-clock"; > + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; > + #clock-cells = <0>; > + clock-div = <8>; > + clock-mult = <1>; > + clock-output-names = "s3"; > + }; > + s4_clk: s4_clk { > + compatible = "fixed-factor-clock"; > + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; > + #clock-cells = <0>; > + clock-div = <16>; > + clock-mult = <1>; > + clock-output-names = "s4"; > + }; > + g_clk: g_clk { > + compatible = "fixed-factor-clock"; > + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; > + #clock-cells = <0>; > + clock-div = <24>; > + clock-mult = <1>; > + clock-output-names = "g"; > + }; > + > + /* Gate clocks */ > + mstp0_clks: mstp0_clks { > + compatible = "renesas,r8a7779-mstp-clocks", "renesas,cpg-mstp- clocks"; > + reg = <0 0xffc80030 0 4>; > + clocks = <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, > <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, > <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, + > <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks > R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks > R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks > R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, > + <&cpg_clocks R8A7779_CLK_P>; > + #clock-cells = <1>; > + renesas,clock-indices = < > + R8A7779_CLK_HSPI R8A7779_CLK_TMU0 R8A7779_CLK_TMU0 > + R8A7779_CLK_TMU0 R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4 > + R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2 R8A7779_CLK_SCIF1 > + R8A7779_CLK_SCIF0 R8A7779_CLK_I2C3 R8A7779_CLK_I2C2 > + R8A7779_CLK_I2C1 R8A7779_CLK_I2C0 > + >; > + clock-output-names = > + "hspi", "tmu00", "tmu01", > + "tmu02", "scif5", "scif4", > + "scif3", "scif2", "scif1", > + "scif0", "i2c3", "i2c2", > + "i2c1", "i2c0"; > + }; > + mstp1_clks: mstp1_clks { > + compatible = "renesas,r8a7779-mstp-clocks", "renesas,cpg-mstp- clocks"; > + reg = <0 0xffc80034 0 4>, <0 0xffc80044 0 4>; > + clocks = <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, > + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, > + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, > + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, > + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, > + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>; > + #clock-cells = <1>; > + renesas,clock-indices = < > + R8A7779_CLK_USB01 R8A7779_CLK_USB01 > + R8A7779_CLK_USB2 R8A7779_CLK_USB2 > + R8A7779_CLK_DU R8A7779_CLK_VIN2 > + R8A7779_CLK_VIN1 R8A7779_CLK_VIN0 > + R8A7779_CLK_ETHER R8A7779_CLK_SATA > + R8A7779_CLK_PCIE R8A7779_CLK_VIN3 > + >; > + clock-output-names = > + "ehci0", "ohci0", > + "ehci1", "ohci1", > + "du", "vin2", > + "vin1", "vin0", > + "ether", "sata", > + "pcie", "vin3"; > + }; > + mstp3_clks: mstp3_clks { > + compatible = "renesas,r8a7779-mstp-clocks", "renesas,cpg-mstp- clocks"; > + reg = <0 0xffc8003c 0 4>; > + clocks = <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, > + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, > + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>; > + #clock-cells = <1>; > + renesas,clock-indices = < > + R8A7779_CLK_SDHI3 R8A7779_CLK_SDHI2 > + R8A7779_CLK_SDHI1 R8A7779_CLK_SDHI0 > + R8A7779_CLK_MMC1 R8A7779_CLK_MMC0 > + >; > + clock-output-names = > + "sdhi3", "sdhi2", > + "sdhi1", "sdhi0", > + "mmc1", "mmc0"; > + }; > + }; > }; -- Regards, Laurent Pinchart
next prev parent reply other threads:[~2014-02-26 14:45 UTC|newest] Thread overview: 118+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-02-26 7:33 [PATCH v3 00/20] ARM: shmobile: r8a7779, marzen: CCF and multiplatform Simon Horman 2014-02-26 7:33 ` Simon Horman 2014-02-26 7:33 ` [PATCH v3 01/20] clk: shmobile: r8a7779: Add clocks support Simon Horman 2014-02-26 7:33 ` Simon Horman 2014-02-26 8:05 ` Geert Uytterhoeven 2014-02-26 8:05 ` Geert Uytterhoeven 2014-02-26 8:59 ` Simon Horman 2014-02-26 8:59 ` Simon Horman 2014-02-26 9:06 ` Geert Uytterhoeven 2014-02-26 9:06 ` Geert Uytterhoeven 2014-02-28 1:35 ` Simon Horman 2014-02-28 1:35 ` Simon Horman 2014-02-26 12:53 ` Laurent Pinchart 2014-02-26 12:53 ` Laurent Pinchart 2014-02-26 13:02 ` Laurent Pinchart 2014-02-26 13:02 ` Laurent Pinchart 2014-03-12 7:55 ` Simon Horman 2014-03-12 7:55 ` Simon Horman 2014-03-12 10:12 ` Laurent Pinchart 2014-03-12 10:12 ` Laurent Pinchart 2014-03-13 2:22 ` Simon Horman 2014-03-13 2:22 ` Simon Horman 2014-03-13 9:07 ` Laurent Pinchart 2014-03-13 9:07 ` Laurent Pinchart 2014-03-14 0:38 ` Simon Horman 2014-03-14 0:38 ` Simon Horman 2014-03-01 13:50 ` Wolfram Sang 2014-03-01 13:50 ` Wolfram Sang 2014-03-01 17:33 ` Geert Uytterhoeven 2014-03-01 17:33 ` Geert Uytterhoeven 2014-03-02 11:35 ` Laurent Pinchart 2014-03-02 11:35 ` Laurent Pinchart 2014-03-02 11:51 ` Geert Uytterhoeven 2014-03-02 11:51 ` Geert Uytterhoeven 2014-03-02 11:59 ` Wolfram Sang 2014-03-02 11:59 ` Wolfram Sang 2014-02-26 7:33 ` [PATCH v3 02/20] clk: shmobile: r8a7779: Add MSTP clock support Simon Horman 2014-02-26 7:33 ` Simon Horman 2014-02-26 12:53 ` Laurent Pinchart 2014-02-26 12:53 ` Laurent Pinchart 2014-02-26 7:33 ` [PATCH v3 03/20] ARM: shmobile: r8a7779: Add clock index macros for DT sources Simon Horman 2014-02-26 7:33 ` Simon Horman 2014-02-26 12:56 ` Laurent Pinchart 2014-02-26 12:56 ` Laurent Pinchart 2014-02-26 7:33 ` [PATCH v3 04/20] ARM: shmobile: r8a7779: Add clocks Simon Horman 2014-02-26 7:33 ` Simon Horman 2014-02-26 8:13 ` Geert Uytterhoeven 2014-02-26 8:13 ` Geert Uytterhoeven 2014-02-26 8:55 ` Simon Horman 2014-02-26 8:55 ` Simon Horman 2014-02-26 13:15 ` Laurent Pinchart 2014-02-26 13:15 ` Laurent Pinchart 2014-03-12 8:40 ` Simon Horman 2014-03-12 8:40 ` Simon Horman 2014-02-26 14:45 ` Laurent Pinchart [this message] 2014-02-26 14:45 ` Laurent Pinchart 2014-03-12 8:43 ` Simon Horman 2014-03-12 8:43 ` Simon Horman 2014-03-01 14:29 ` Wolfram Sang 2014-03-01 14:29 ` Wolfram Sang 2014-02-26 7:33 ` [PATCH v3 05/20] ARM: shmobile: Sync Marzen DTS with Marzen reference DTS Simon Horman 2014-02-26 7:33 ` Simon Horman 2014-02-26 13:17 ` Laurent Pinchart 2014-02-26 13:17 ` Laurent Pinchart 2014-02-26 7:33 ` [PATCH v3 06/20] ARM: shmobile: marzen: Specify external clock frequency in DT Simon Horman 2014-02-26 7:33 ` Simon Horman 2014-02-26 13:19 ` Laurent Pinchart 2014-02-26 13:19 ` Laurent Pinchart 2014-02-26 7:33 ` [PATCH v3 07/20] ARM: shmobile: marzen: Reference clocks Simon Horman 2014-02-26 7:33 ` Simon Horman 2014-02-26 13:20 ` Laurent Pinchart 2014-02-26 13:20 ` Laurent Pinchart 2014-02-26 14:23 ` Sergei Shtylyov 2014-02-26 15:23 ` Sergei Shtylyov 2014-03-13 0:09 ` Simon Horman 2014-03-13 0:09 ` Simon Horman 2014-02-26 7:33 ` [PATCH v3 08/20] ARM: shmobile: r8a7779: " Simon Horman 2014-02-26 7:33 ` Simon Horman 2014-02-26 13:21 ` Laurent Pinchart 2014-02-26 13:21 ` Laurent Pinchart 2014-02-26 7:33 ` [PATCH v3 09/20] ARM: shmobile: r8a7779: Add helper to read mode pins Simon Horman 2014-02-26 7:33 ` Simon Horman 2014-02-26 7:33 ` [PATCH v3 10/20] ARM: shmobile: r8a7779: Move r8a7779_earlytimer_init to clock-r8a7779.c Simon Horman 2014-02-26 7:33 ` Simon Horman 2014-02-26 7:33 ` [PATCH v3 11/20] ARM: shmobile: marzen-reference: Move clock and OF device initialisation into board Simon Horman 2014-02-26 7:33 ` [PATCH v3 11/20] ARM: shmobile: marzen-reference: Move clock and OF device initialisation into board code Simon Horman 2014-02-26 7:33 ` [PATCH v3 12/20] ARM: shmobile: r8a7779: Do not include sh_clk.h in r8a7779.h Simon Horman 2014-02-26 7:33 ` Simon Horman 2014-02-26 7:33 ` [PATCH v3 13/20] ARM: shmobile: r8a7779: Initial multiplatform support Simon Horman 2014-02-26 7:33 ` Simon Horman 2014-02-26 7:33 ` [PATCH v3 14/20] ARM: shmobile: marzen-reference: Initialize CPG device Simon Horman 2014-02-26 7:33 ` Simon Horman 2014-02-26 13:22 ` Laurent Pinchart 2014-02-26 13:22 ` Laurent Pinchart 2014-02-26 7:33 ` [PATCH v3 15/20] ARM: shmobile: marzen-reference: Instantiate clkdevs for SCIF and TMU Simon Horman 2014-02-26 7:33 ` Simon Horman 2014-02-26 8:29 ` Geert Uytterhoeven 2014-02-26 8:29 ` Geert Uytterhoeven 2014-02-26 8:56 ` Simon Horman 2014-02-26 8:56 ` Simon Horman 2014-02-26 13:24 ` Laurent Pinchart 2014-02-26 13:24 ` Laurent Pinchart 2014-03-13 0:03 ` Simon Horman 2014-03-13 0:03 ` Simon Horman 2014-02-26 7:33 ` [PATCH v3 16/20] ARM: shmobile: marzen: Add to shmobile defconfig Simon Horman 2014-02-26 7:33 ` Simon Horman 2014-02-26 7:33 ` [PATCH v3 17/20] ARM: shmobile: Remove non-multiplatform Marzen reference support Simon Horman 2014-02-26 7:33 ` Simon Horman 2014-02-26 7:33 ` [PATCH v3 18/20] ARM: shmobile: Let Marzen multiplatform boot with Marzen DTB Simon Horman 2014-02-26 7:33 ` Simon Horman 2014-02-26 7:33 ` [PATCH v3 19/20] ARM: shmobile: Remove Marzen reference DTS Simon Horman 2014-02-26 7:33 ` Simon Horman 2014-02-26 7:33 ` [PATCH v3 20/20] ARM: shmobile: marzen-reference: Remove legacy clock support Simon Horman 2014-02-26 7:33 ` Simon Horman 2014-02-26 8:33 ` Geert Uytterhoeven 2014-02-26 8:33 ` Geert Uytterhoeven 2014-02-26 8:57 ` Simon Horman 2014-02-26 8:57 ` Simon Horman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=7964326.0VzqzhpvEl@avalon \ --to=laurent.pinchart@ideasonboard.com \ --cc=linux-arm-kernel@lists.infradead.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.