* [GIT PULL] ARM part of USB patches
@ 2013-02-05 15:24 ` kishon
0 siblings, 0 replies; 18+ messages in thread
From: kishon @ 2013-02-05 15:24 UTC (permalink / raw)
To: gregkh, Tony Lindgren
Cc: Felipe Balbi, KISHON, linux-usb, linux-arm-kernel, linux-omap,
linux-kernel, linux-doc, devicetree-discuss, linux
Hi Tony,
As discussed, I'm sending a pull request for the arch/arm part of my USB
patches. These patches are necessary to get MUSB functional in both dt
and non-dt boot. Also added dt data for dwc3 present in OMAP. This patch
series *depends* on some of the patches which are merged in usb-next.
Thanks
Kishon
The following changes since commit 88b62b915b0b7e25870eb0604ed9a92ba4bfc9f7:
Linux 3.8-rc6 (2013-02-01 12:08:14 +1100)
are available in the git repository at:
git://gitorious.org/linux-usb/linux-usb.git arm-usb-dt
for you to fetch changes up to 09084a48903c6056e20e27ae5054902958a10275:
ARM: dts: omap5: add dwc3 core dt data (2013-02-05 20:11:46 +0530)
----------------------------------------------------------------
Kishon Vijay Abraham I (12):
ARM: OMAP4: remove control module address space from PHY and OTG
ARM: OMAP: devices: create device for usb part of control module
ARM: OMAP2: MUSB: Specify omap4 has mailbox
ARM: dts: omap: Add omap control usb data
ARM: dts: omap: Add omap-usb2 dt data
ARM: dts: omap: Add usb_otg and glue data
ARM: OMAP: USB: Add phy binding information
ARM: dts: omap5: Add omap control usb data
ARM: dts: omap5: Add ocp2scp data
ARM: dts: omap5: Add omap-usb3 and omap-usb2 dt data
ARM: dts: omap5: add dwc3 omap dt data
ARM: dts: omap5: add dwc3 core dt data
Documentation/devicetree/bindings/usb/omap-usb.txt | 1 +
arch/arm/boot/dts/omap3-beagle-xm.dts | 6 ++++++
arch/arm/boot/dts/omap3-evm.dts | 6 ++++++
arch/arm/boot/dts/omap3-overo.dtsi | 6 ++++++
arch/arm/boot/dts/omap3.dtsi | 12 ++++++++++++
arch/arm/boot/dts/omap4-panda.dts | 6 ++++++
arch/arm/boot/dts/omap4-sdp.dts | 6 ++++++
arch/arm/boot/dts/omap4.dtsi | 26
++++++++++++++++++++++++++
arch/arm/boot/dts/omap5.dtsi | 48
++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/twl4030.dtsi | 2 +-
arch/arm/mach-omap2/board-2430sdp.c | 2 ++
arch/arm/mach-omap2/board-3430sdp.c | 2 ++
arch/arm/mach-omap2/board-4430sdp.c | 2 ++
arch/arm/mach-omap2/board-cm-t35.c | 2 ++
arch/arm/mach-omap2/board-devkit8000.c | 2 ++
arch/arm/mach-omap2/board-igep0020.c | 2 ++
arch/arm/mach-omap2/board-ldp.c | 2 ++
arch/arm/mach-omap2/board-omap3beagle.c | 2 ++
arch/arm/mach-omap2/board-omap3evm.c | 2 ++
arch/arm/mach-omap2/board-omap3logic.c | 2 ++
arch/arm/mach-omap2/board-omap3pandora.c | 2 ++
arch/arm/mach-omap2/board-omap3stalker.c | 2 ++
arch/arm/mach-omap2/board-omap3touchbook.c | 2 ++
arch/arm/mach-omap2/board-omap4panda.c | 2 ++
arch/arm/mach-omap2/board-overo.c | 2 ++
arch/arm/mach-omap2/board-rm680.c | 2 ++
arch/arm/mach-omap2/board-zoom-peripherals.c | 2 ++
arch/arm/mach-omap2/devices.c | 45
+++++++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 13 -------------
arch/arm/mach-omap2/usb-musb.c | 3 +++
include/linux/usb/musb.h | 2 ++
31 files changed, 202 insertions(+), 14 deletions(-)
^ permalink raw reply [flat|nested] 18+ messages in thread
* [GIT PULL] ARM part of USB patches
@ 2013-02-05 15:24 ` kishon
0 siblings, 0 replies; 18+ messages in thread
From: kishon @ 2013-02-05 15:24 UTC (permalink / raw)
To: gregkh, Tony Lindgren
Cc: Felipe Balbi, KISHON, linux-usb, linux-arm-kernel, linux-omap,
linux-kernel, linux-doc, devicetree-discuss, linux
Hi Tony,
As discussed, I'm sending a pull request for the arch/arm part of my USB
patches. These patches are necessary to get MUSB functional in both dt
and non-dt boot. Also added dt data for dwc3 present in OMAP. This patch
series *depends* on some of the patches which are merged in usb-next.
Thanks
Kishon
The following changes since commit 88b62b915b0b7e25870eb0604ed9a92ba4bfc9f7:
Linux 3.8-rc6 (2013-02-01 12:08:14 +1100)
are available in the git repository at:
git://gitorious.org/linux-usb/linux-usb.git arm-usb-dt
for you to fetch changes up to 09084a48903c6056e20e27ae5054902958a10275:
ARM: dts: omap5: add dwc3 core dt data (2013-02-05 20:11:46 +0530)
----------------------------------------------------------------
Kishon Vijay Abraham I (12):
ARM: OMAP4: remove control module address space from PHY and OTG
ARM: OMAP: devices: create device for usb part of control module
ARM: OMAP2: MUSB: Specify omap4 has mailbox
ARM: dts: omap: Add omap control usb data
ARM: dts: omap: Add omap-usb2 dt data
ARM: dts: omap: Add usb_otg and glue data
ARM: OMAP: USB: Add phy binding information
ARM: dts: omap5: Add omap control usb data
ARM: dts: omap5: Add ocp2scp data
ARM: dts: omap5: Add omap-usb3 and omap-usb2 dt data
ARM: dts: omap5: add dwc3 omap dt data
ARM: dts: omap5: add dwc3 core dt data
Documentation/devicetree/bindings/usb/omap-usb.txt | 1 +
arch/arm/boot/dts/omap3-beagle-xm.dts | 6 ++++++
arch/arm/boot/dts/omap3-evm.dts | 6 ++++++
arch/arm/boot/dts/omap3-overo.dtsi | 6 ++++++
arch/arm/boot/dts/omap3.dtsi | 12 ++++++++++++
arch/arm/boot/dts/omap4-panda.dts | 6 ++++++
arch/arm/boot/dts/omap4-sdp.dts | 6 ++++++
arch/arm/boot/dts/omap4.dtsi | 26
++++++++++++++++++++++++++
arch/arm/boot/dts/omap5.dtsi | 48
++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/twl4030.dtsi | 2 +-
arch/arm/mach-omap2/board-2430sdp.c | 2 ++
arch/arm/mach-omap2/board-3430sdp.c | 2 ++
arch/arm/mach-omap2/board-4430sdp.c | 2 ++
arch/arm/mach-omap2/board-cm-t35.c | 2 ++
arch/arm/mach-omap2/board-devkit8000.c | 2 ++
arch/arm/mach-omap2/board-igep0020.c | 2 ++
arch/arm/mach-omap2/board-ldp.c | 2 ++
arch/arm/mach-omap2/board-omap3beagle.c | 2 ++
arch/arm/mach-omap2/board-omap3evm.c | 2 ++
arch/arm/mach-omap2/board-omap3logic.c | 2 ++
arch/arm/mach-omap2/board-omap3pandora.c | 2 ++
arch/arm/mach-omap2/board-omap3stalker.c | 2 ++
arch/arm/mach-omap2/board-omap3touchbook.c | 2 ++
arch/arm/mach-omap2/board-omap4panda.c | 2 ++
arch/arm/mach-omap2/board-overo.c | 2 ++
arch/arm/mach-omap2/board-rm680.c | 2 ++
arch/arm/mach-omap2/board-zoom-peripherals.c | 2 ++
arch/arm/mach-omap2/devices.c | 45
+++++++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 13 -------------
arch/arm/mach-omap2/usb-musb.c | 3 +++
include/linux/usb/musb.h | 2 ++
31 files changed, 202 insertions(+), 14 deletions(-)
^ permalink raw reply [flat|nested] 18+ messages in thread
* [GIT PULL] ARM part of USB patches
@ 2013-02-05 15:24 ` kishon
0 siblings, 0 replies; 18+ messages in thread
From: kishon @ 2013-02-05 15:24 UTC (permalink / raw)
To: linux-arm-kernel
Hi Tony,
As discussed, I'm sending a pull request for the arch/arm part of my USB
patches. These patches are necessary to get MUSB functional in both dt
and non-dt boot. Also added dt data for dwc3 present in OMAP. This patch
series *depends* on some of the patches which are merged in usb-next.
Thanks
Kishon
The following changes since commit 88b62b915b0b7e25870eb0604ed9a92ba4bfc9f7:
Linux 3.8-rc6 (2013-02-01 12:08:14 +1100)
are available in the git repository at:
git://gitorious.org/linux-usb/linux-usb.git arm-usb-dt
for you to fetch changes up to 09084a48903c6056e20e27ae5054902958a10275:
ARM: dts: omap5: add dwc3 core dt data (2013-02-05 20:11:46 +0530)
----------------------------------------------------------------
Kishon Vijay Abraham I (12):
ARM: OMAP4: remove control module address space from PHY and OTG
ARM: OMAP: devices: create device for usb part of control module
ARM: OMAP2: MUSB: Specify omap4 has mailbox
ARM: dts: omap: Add omap control usb data
ARM: dts: omap: Add omap-usb2 dt data
ARM: dts: omap: Add usb_otg and glue data
ARM: OMAP: USB: Add phy binding information
ARM: dts: omap5: Add omap control usb data
ARM: dts: omap5: Add ocp2scp data
ARM: dts: omap5: Add omap-usb3 and omap-usb2 dt data
ARM: dts: omap5: add dwc3 omap dt data
ARM: dts: omap5: add dwc3 core dt data
Documentation/devicetree/bindings/usb/omap-usb.txt | 1 +
arch/arm/boot/dts/omap3-beagle-xm.dts | 6 ++++++
arch/arm/boot/dts/omap3-evm.dts | 6 ++++++
arch/arm/boot/dts/omap3-overo.dtsi | 6 ++++++
arch/arm/boot/dts/omap3.dtsi | 12 ++++++++++++
arch/arm/boot/dts/omap4-panda.dts | 6 ++++++
arch/arm/boot/dts/omap4-sdp.dts | 6 ++++++
arch/arm/boot/dts/omap4.dtsi | 26
++++++++++++++++++++++++++
arch/arm/boot/dts/omap5.dtsi | 48
++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/twl4030.dtsi | 2 +-
arch/arm/mach-omap2/board-2430sdp.c | 2 ++
arch/arm/mach-omap2/board-3430sdp.c | 2 ++
arch/arm/mach-omap2/board-4430sdp.c | 2 ++
arch/arm/mach-omap2/board-cm-t35.c | 2 ++
arch/arm/mach-omap2/board-devkit8000.c | 2 ++
arch/arm/mach-omap2/board-igep0020.c | 2 ++
arch/arm/mach-omap2/board-ldp.c | 2 ++
arch/arm/mach-omap2/board-omap3beagle.c | 2 ++
arch/arm/mach-omap2/board-omap3evm.c | 2 ++
arch/arm/mach-omap2/board-omap3logic.c | 2 ++
arch/arm/mach-omap2/board-omap3pandora.c | 2 ++
arch/arm/mach-omap2/board-omap3stalker.c | 2 ++
arch/arm/mach-omap2/board-omap3touchbook.c | 2 ++
arch/arm/mach-omap2/board-omap4panda.c | 2 ++
arch/arm/mach-omap2/board-overo.c | 2 ++
arch/arm/mach-omap2/board-rm680.c | 2 ++
arch/arm/mach-omap2/board-zoom-peripherals.c | 2 ++
arch/arm/mach-omap2/devices.c | 45
+++++++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 13 -------------
arch/arm/mach-omap2/usb-musb.c | 3 +++
include/linux/usb/musb.h | 2 ++
31 files changed, 202 insertions(+), 14 deletions(-)
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [GIT PULL] ARM part of USB patches
2013-02-05 15:24 ` kishon
(?)
@ 2013-02-05 15:26 ` kishon
-1 siblings, 0 replies; 18+ messages in thread
From: kishon @ 2013-02-05 15:26 UTC (permalink / raw)
To: gregkh, Tony Lindgren
Cc: Felipe Balbi, linux-usb, linux-arm-kernel, linux-omap,
linux-kernel, linux-doc, devicetree-discuss, linux
Hi Tony, Greg,
On Tuesday 05 February 2013 08:54 PM, kishon wrote:
> Hi Tony,
>
> As discussed, I'm sending a pull request for the arch/arm part of my USB
> patches. These patches are necessary to get MUSB functional in both dt
> and non-dt boot. Also added dt data for dwc3 present in OMAP. This patch
> series *depends* on some of the patches which are merged in usb-next.
This patch series should go in only after USB. Or else it will break
compilation.
Thanks
Kishon
>
> Thanks
> Kishon
>
> The following changes since commit
> 88b62b915b0b7e25870eb0604ed9a92ba4bfc9f7:
>
> Linux 3.8-rc6 (2013-02-01 12:08:14 +1100)
>
> are available in the git repository at:
>
> git://gitorious.org/linux-usb/linux-usb.git arm-usb-dt
>
> for you to fetch changes up to 09084a48903c6056e20e27ae5054902958a10275:
>
> ARM: dts: omap5: add dwc3 core dt data (2013-02-05 20:11:46 +0530)
>
> ----------------------------------------------------------------
> Kishon Vijay Abraham I (12):
> ARM: OMAP4: remove control module address space from PHY and OTG
> ARM: OMAP: devices: create device for usb part of control module
> ARM: OMAP2: MUSB: Specify omap4 has mailbox
> ARM: dts: omap: Add omap control usb data
> ARM: dts: omap: Add omap-usb2 dt data
> ARM: dts: omap: Add usb_otg and glue data
> ARM: OMAP: USB: Add phy binding information
> ARM: dts: omap5: Add omap control usb data
> ARM: dts: omap5: Add ocp2scp data
> ARM: dts: omap5: Add omap-usb3 and omap-usb2 dt data
> ARM: dts: omap5: add dwc3 omap dt data
> ARM: dts: omap5: add dwc3 core dt data
>
> Documentation/devicetree/bindings/usb/omap-usb.txt | 1 +
> arch/arm/boot/dts/omap3-beagle-xm.dts | 6 ++++++
> arch/arm/boot/dts/omap3-evm.dts | 6 ++++++
> arch/arm/boot/dts/omap3-overo.dtsi | 6 ++++++
> arch/arm/boot/dts/omap3.dtsi | 12 ++++++++++++
> arch/arm/boot/dts/omap4-panda.dts | 6 ++++++
> arch/arm/boot/dts/omap4-sdp.dts | 6 ++++++
> arch/arm/boot/dts/omap4.dtsi | 26
> ++++++++++++++++++++++++++
> arch/arm/boot/dts/omap5.dtsi | 48
> ++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/twl4030.dtsi | 2 +-
> arch/arm/mach-omap2/board-2430sdp.c | 2 ++
> arch/arm/mach-omap2/board-3430sdp.c | 2 ++
> arch/arm/mach-omap2/board-4430sdp.c | 2 ++
> arch/arm/mach-omap2/board-cm-t35.c | 2 ++
> arch/arm/mach-omap2/board-devkit8000.c | 2 ++
> arch/arm/mach-omap2/board-igep0020.c | 2 ++
> arch/arm/mach-omap2/board-ldp.c | 2 ++
> arch/arm/mach-omap2/board-omap3beagle.c | 2 ++
> arch/arm/mach-omap2/board-omap3evm.c | 2 ++
> arch/arm/mach-omap2/board-omap3logic.c | 2 ++
> arch/arm/mach-omap2/board-omap3pandora.c | 2 ++
> arch/arm/mach-omap2/board-omap3stalker.c | 2 ++
> arch/arm/mach-omap2/board-omap3touchbook.c | 2 ++
> arch/arm/mach-omap2/board-omap4panda.c | 2 ++
> arch/arm/mach-omap2/board-overo.c | 2 ++
> arch/arm/mach-omap2/board-rm680.c | 2 ++
> arch/arm/mach-omap2/board-zoom-peripherals.c | 2 ++
> arch/arm/mach-omap2/devices.c | 45
> +++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 13 -------------
> arch/arm/mach-omap2/usb-musb.c | 3 +++
> include/linux/usb/musb.h | 2 ++
> 31 files changed, 202 insertions(+), 14 deletions(-)
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [GIT PULL] ARM part of USB patches
@ 2013-02-05 15:26 ` kishon
0 siblings, 0 replies; 18+ messages in thread
From: kishon @ 2013-02-05 15:26 UTC (permalink / raw)
To: gregkh, Tony Lindgren
Cc: Felipe Balbi, linux-usb, linux-arm-kernel, linux-omap,
linux-kernel, linux-doc, devicetree-discuss, linux
Hi Tony, Greg,
On Tuesday 05 February 2013 08:54 PM, kishon wrote:
> Hi Tony,
>
> As discussed, I'm sending a pull request for the arch/arm part of my USB
> patches. These patches are necessary to get MUSB functional in both dt
> and non-dt boot. Also added dt data for dwc3 present in OMAP. This patch
> series *depends* on some of the patches which are merged in usb-next.
This patch series should go in only after USB. Or else it will break
compilation.
Thanks
Kishon
>
> Thanks
> Kishon
>
> The following changes since commit
> 88b62b915b0b7e25870eb0604ed9a92ba4bfc9f7:
>
> Linux 3.8-rc6 (2013-02-01 12:08:14 +1100)
>
> are available in the git repository at:
>
> git://gitorious.org/linux-usb/linux-usb.git arm-usb-dt
>
> for you to fetch changes up to 09084a48903c6056e20e27ae5054902958a10275:
>
> ARM: dts: omap5: add dwc3 core dt data (2013-02-05 20:11:46 +0530)
>
> ----------------------------------------------------------------
> Kishon Vijay Abraham I (12):
> ARM: OMAP4: remove control module address space from PHY and OTG
> ARM: OMAP: devices: create device for usb part of control module
> ARM: OMAP2: MUSB: Specify omap4 has mailbox
> ARM: dts: omap: Add omap control usb data
> ARM: dts: omap: Add omap-usb2 dt data
> ARM: dts: omap: Add usb_otg and glue data
> ARM: OMAP: USB: Add phy binding information
> ARM: dts: omap5: Add omap control usb data
> ARM: dts: omap5: Add ocp2scp data
> ARM: dts: omap5: Add omap-usb3 and omap-usb2 dt data
> ARM: dts: omap5: add dwc3 omap dt data
> ARM: dts: omap5: add dwc3 core dt data
>
> Documentation/devicetree/bindings/usb/omap-usb.txt | 1 +
> arch/arm/boot/dts/omap3-beagle-xm.dts | 6 ++++++
> arch/arm/boot/dts/omap3-evm.dts | 6 ++++++
> arch/arm/boot/dts/omap3-overo.dtsi | 6 ++++++
> arch/arm/boot/dts/omap3.dtsi | 12 ++++++++++++
> arch/arm/boot/dts/omap4-panda.dts | 6 ++++++
> arch/arm/boot/dts/omap4-sdp.dts | 6 ++++++
> arch/arm/boot/dts/omap4.dtsi | 26
> ++++++++++++++++++++++++++
> arch/arm/boot/dts/omap5.dtsi | 48
> ++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/twl4030.dtsi | 2 +-
> arch/arm/mach-omap2/board-2430sdp.c | 2 ++
> arch/arm/mach-omap2/board-3430sdp.c | 2 ++
> arch/arm/mach-omap2/board-4430sdp.c | 2 ++
> arch/arm/mach-omap2/board-cm-t35.c | 2 ++
> arch/arm/mach-omap2/board-devkit8000.c | 2 ++
> arch/arm/mach-omap2/board-igep0020.c | 2 ++
> arch/arm/mach-omap2/board-ldp.c | 2 ++
> arch/arm/mach-omap2/board-omap3beagle.c | 2 ++
> arch/arm/mach-omap2/board-omap3evm.c | 2 ++
> arch/arm/mach-omap2/board-omap3logic.c | 2 ++
> arch/arm/mach-omap2/board-omap3pandora.c | 2 ++
> arch/arm/mach-omap2/board-omap3stalker.c | 2 ++
> arch/arm/mach-omap2/board-omap3touchbook.c | 2 ++
> arch/arm/mach-omap2/board-omap4panda.c | 2 ++
> arch/arm/mach-omap2/board-overo.c | 2 ++
> arch/arm/mach-omap2/board-rm680.c | 2 ++
> arch/arm/mach-omap2/board-zoom-peripherals.c | 2 ++
> arch/arm/mach-omap2/devices.c | 45
> +++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 13 -------------
> arch/arm/mach-omap2/usb-musb.c | 3 +++
> include/linux/usb/musb.h | 2 ++
> 31 files changed, 202 insertions(+), 14 deletions(-)
^ permalink raw reply [flat|nested] 18+ messages in thread
* [GIT PULL] ARM part of USB patches
@ 2013-02-05 15:26 ` kishon
0 siblings, 0 replies; 18+ messages in thread
From: kishon @ 2013-02-05 15:26 UTC (permalink / raw)
To: linux-arm-kernel
Hi Tony, Greg,
On Tuesday 05 February 2013 08:54 PM, kishon wrote:
> Hi Tony,
>
> As discussed, I'm sending a pull request for the arch/arm part of my USB
> patches. These patches are necessary to get MUSB functional in both dt
> and non-dt boot. Also added dt data for dwc3 present in OMAP. This patch
> series *depends* on some of the patches which are merged in usb-next.
This patch series should go in only after USB. Or else it will break
compilation.
Thanks
Kishon
>
> Thanks
> Kishon
>
> The following changes since commit
> 88b62b915b0b7e25870eb0604ed9a92ba4bfc9f7:
>
> Linux 3.8-rc6 (2013-02-01 12:08:14 +1100)
>
> are available in the git repository at:
>
> git://gitorious.org/linux-usb/linux-usb.git arm-usb-dt
>
> for you to fetch changes up to 09084a48903c6056e20e27ae5054902958a10275:
>
> ARM: dts: omap5: add dwc3 core dt data (2013-02-05 20:11:46 +0530)
>
> ----------------------------------------------------------------
> Kishon Vijay Abraham I (12):
> ARM: OMAP4: remove control module address space from PHY and OTG
> ARM: OMAP: devices: create device for usb part of control module
> ARM: OMAP2: MUSB: Specify omap4 has mailbox
> ARM: dts: omap: Add omap control usb data
> ARM: dts: omap: Add omap-usb2 dt data
> ARM: dts: omap: Add usb_otg and glue data
> ARM: OMAP: USB: Add phy binding information
> ARM: dts: omap5: Add omap control usb data
> ARM: dts: omap5: Add ocp2scp data
> ARM: dts: omap5: Add omap-usb3 and omap-usb2 dt data
> ARM: dts: omap5: add dwc3 omap dt data
> ARM: dts: omap5: add dwc3 core dt data
>
> Documentation/devicetree/bindings/usb/omap-usb.txt | 1 +
> arch/arm/boot/dts/omap3-beagle-xm.dts | 6 ++++++
> arch/arm/boot/dts/omap3-evm.dts | 6 ++++++
> arch/arm/boot/dts/omap3-overo.dtsi | 6 ++++++
> arch/arm/boot/dts/omap3.dtsi | 12 ++++++++++++
> arch/arm/boot/dts/omap4-panda.dts | 6 ++++++
> arch/arm/boot/dts/omap4-sdp.dts | 6 ++++++
> arch/arm/boot/dts/omap4.dtsi | 26
> ++++++++++++++++++++++++++
> arch/arm/boot/dts/omap5.dtsi | 48
> ++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/twl4030.dtsi | 2 +-
> arch/arm/mach-omap2/board-2430sdp.c | 2 ++
> arch/arm/mach-omap2/board-3430sdp.c | 2 ++
> arch/arm/mach-omap2/board-4430sdp.c | 2 ++
> arch/arm/mach-omap2/board-cm-t35.c | 2 ++
> arch/arm/mach-omap2/board-devkit8000.c | 2 ++
> arch/arm/mach-omap2/board-igep0020.c | 2 ++
> arch/arm/mach-omap2/board-ldp.c | 2 ++
> arch/arm/mach-omap2/board-omap3beagle.c | 2 ++
> arch/arm/mach-omap2/board-omap3evm.c | 2 ++
> arch/arm/mach-omap2/board-omap3logic.c | 2 ++
> arch/arm/mach-omap2/board-omap3pandora.c | 2 ++
> arch/arm/mach-omap2/board-omap3stalker.c | 2 ++
> arch/arm/mach-omap2/board-omap3touchbook.c | 2 ++
> arch/arm/mach-omap2/board-omap4panda.c | 2 ++
> arch/arm/mach-omap2/board-overo.c | 2 ++
> arch/arm/mach-omap2/board-rm680.c | 2 ++
> arch/arm/mach-omap2/board-zoom-peripherals.c | 2 ++
> arch/arm/mach-omap2/devices.c | 45
> +++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 13 -------------
> arch/arm/mach-omap2/usb-musb.c | 3 +++
> include/linux/usb/musb.h | 2 ++
> 31 files changed, 202 insertions(+), 14 deletions(-)
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [GIT PULL] ARM part of USB patches
2013-02-05 15:26 ` kishon
(?)
@ 2013-02-05 17:27 ` gregkh
-1 siblings, 0 replies; 18+ messages in thread
From: gregkh @ 2013-02-05 17:27 UTC (permalink / raw)
To: kishon
Cc: Tony Lindgren, Felipe Balbi, linux-usb, linux-arm-kernel,
linux-omap, linux-kernel, linux-doc, devicetree-discuss, linux
On Tue, Feb 05, 2013 at 08:56:13PM +0530, kishon wrote:
> Hi Tony, Greg,
>
> On Tuesday 05 February 2013 08:54 PM, kishon wrote:
> >Hi Tony,
> >
> >As discussed, I'm sending a pull request for the arch/arm part of my USB
> >patches. These patches are necessary to get MUSB functional in both dt
> >and non-dt boot. Also added dt data for dwc3 present in OMAP. This patch
> >series *depends* on some of the patches which are merged in usb-next.
>
> This patch series should go in only after USB. Or else it will break
> compilation.
Then it probably should go through the USB tree, right? We don't want
to break bisectability.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [GIT PULL] ARM part of USB patches
@ 2013-02-05 17:27 ` gregkh
0 siblings, 0 replies; 18+ messages in thread
From: gregkh @ 2013-02-05 17:27 UTC (permalink / raw)
To: kishon
Cc: Tony Lindgren, Felipe Balbi, linux-usb, linux-arm-kernel,
linux-omap, linux-kernel, linux-doc, devicetree-discuss, linux
On Tue, Feb 05, 2013 at 08:56:13PM +0530, kishon wrote:
> Hi Tony, Greg,
>
> On Tuesday 05 February 2013 08:54 PM, kishon wrote:
> >Hi Tony,
> >
> >As discussed, I'm sending a pull request for the arch/arm part of my USB
> >patches. These patches are necessary to get MUSB functional in both dt
> >and non-dt boot. Also added dt data for dwc3 present in OMAP. This patch
> >series *depends* on some of the patches which are merged in usb-next.
>
> This patch series should go in only after USB. Or else it will break
> compilation.
Then it probably should go through the USB tree, right? We don't want
to break bisectability.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 18+ messages in thread
* [GIT PULL] ARM part of USB patches
@ 2013-02-05 17:27 ` gregkh
0 siblings, 0 replies; 18+ messages in thread
From: gregkh at linuxfoundation.org @ 2013-02-05 17:27 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Feb 05, 2013 at 08:56:13PM +0530, kishon wrote:
> Hi Tony, Greg,
>
> On Tuesday 05 February 2013 08:54 PM, kishon wrote:
> >Hi Tony,
> >
> >As discussed, I'm sending a pull request for the arch/arm part of my USB
> >patches. These patches are necessary to get MUSB functional in both dt
> >and non-dt boot. Also added dt data for dwc3 present in OMAP. This patch
> >series *depends* on some of the patches which are merged in usb-next.
>
> This patch series should go in only after USB. Or else it will break
> compilation.
Then it probably should go through the USB tree, right? We don't want
to break bisectability.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [GIT PULL] ARM part of USB patches
@ 2013-02-05 18:19 ` Tony Lindgren
0 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2013-02-05 18:19 UTC (permalink / raw)
To: gregkh, Cousson, Benoit
Cc: kishon, Felipe Balbi, linux-usb, linux-arm-kernel, linux-omap,
linux-kernel, linux-doc, devicetree-discuss, linux
* gregkh@linuxfoundation.org <gregkh@linuxfoundation.org> [130205 09:28]:
> On Tue, Feb 05, 2013 at 08:56:13PM +0530, kishon wrote:
> > Hi Tony, Greg,
> >
> > On Tuesday 05 February 2013 08:54 PM, kishon wrote:
> > >Hi Tony,
> > >
> > >As discussed, I'm sending a pull request for the arch/arm part of my USB
> > >patches. These patches are necessary to get MUSB functional in both dt
> > >and non-dt boot. Also added dt data for dwc3 present in OMAP. This patch
> > >series *depends* on some of the patches which are merged in usb-next.
> >
> > This patch series should go in only after USB. Or else it will break
> > compilation.
>
> Then it probably should go through the USB tree, right? We don't want
> to break bisectability.
Looks like this branch needs to be based on at least 01658f0f (usb: phy:
add a new driver for usb part of control module) to compile. Probably
needs other USB patches too to make sense.
This branch has a high likelihood of conflicting with .dts files, so
Kishon, I suggest you do two branches:
1. A branch for Greg based on top of the USB changes
This branch should contain:
ARM: OMAP4: remove control module address space from PHY and OTG
ARM: OMAP: devices: create device for usb part of control module
ARM: OMAP2: MUSB: Specify omap4 has mailbox
ARM: OMAP: USB: Add phy binding information
Naturally please make sure they compile and boot on their own.
Looks like this will only cause few trivial include merge conflicts
with what I have queued up.
You can add my Acked-by: Tony Lindgren <tony@atomide.com> for those.
2. A branch for Benoit based on v3.8-rc6
That branch should contain all the .dts changes as those will
most likely cause nasty merge conflicts otherwise with what
Benoit has queued up.
Regards,
Tony
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [GIT PULL] ARM part of USB patches
@ 2013-02-05 18:19 ` Tony Lindgren
0 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2013-02-05 18:19 UTC (permalink / raw)
To: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, Cousson, Benoit
Cc: linux-lFZ/pmaqli7XmaaqVzeoHQ, linux-doc-u79uwXL29TY76Z2rM5mHXA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-usb-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Felipe Balbi, kishon,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
* gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org> [130205 09:28]:
> On Tue, Feb 05, 2013 at 08:56:13PM +0530, kishon wrote:
> > Hi Tony, Greg,
> >
> > On Tuesday 05 February 2013 08:54 PM, kishon wrote:
> > >Hi Tony,
> > >
> > >As discussed, I'm sending a pull request for the arch/arm part of my USB
> > >patches. These patches are necessary to get MUSB functional in both dt
> > >and non-dt boot. Also added dt data for dwc3 present in OMAP. This patch
> > >series *depends* on some of the patches which are merged in usb-next.
> >
> > This patch series should go in only after USB. Or else it will break
> > compilation.
>
> Then it probably should go through the USB tree, right? We don't want
> to break bisectability.
Looks like this branch needs to be based on at least 01658f0f (usb: phy:
add a new driver for usb part of control module) to compile. Probably
needs other USB patches too to make sense.
This branch has a high likelihood of conflicting with .dts files, so
Kishon, I suggest you do two branches:
1. A branch for Greg based on top of the USB changes
This branch should contain:
ARM: OMAP4: remove control module address space from PHY and OTG
ARM: OMAP: devices: create device for usb part of control module
ARM: OMAP2: MUSB: Specify omap4 has mailbox
ARM: OMAP: USB: Add phy binding information
Naturally please make sure they compile and boot on their own.
Looks like this will only cause few trivial include merge conflicts
with what I have queued up.
You can add my Acked-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> for those.
2. A branch for Benoit based on v3.8-rc6
That branch should contain all the .dts changes as those will
most likely cause nasty merge conflicts otherwise with what
Benoit has queued up.
Regards,
Tony
^ permalink raw reply [flat|nested] 18+ messages in thread
* [GIT PULL] ARM part of USB patches
@ 2013-02-05 18:19 ` Tony Lindgren
0 siblings, 0 replies; 18+ messages in thread
From: Tony Lindgren @ 2013-02-05 18:19 UTC (permalink / raw)
To: linux-arm-kernel
* gregkh at linuxfoundation.org <gregkh@linuxfoundation.org> [130205 09:28]:
> On Tue, Feb 05, 2013 at 08:56:13PM +0530, kishon wrote:
> > Hi Tony, Greg,
> >
> > On Tuesday 05 February 2013 08:54 PM, kishon wrote:
> > >Hi Tony,
> > >
> > >As discussed, I'm sending a pull request for the arch/arm part of my USB
> > >patches. These patches are necessary to get MUSB functional in both dt
> > >and non-dt boot. Also added dt data for dwc3 present in OMAP. This patch
> > >series *depends* on some of the patches which are merged in usb-next.
> >
> > This patch series should go in only after USB. Or else it will break
> > compilation.
>
> Then it probably should go through the USB tree, right? We don't want
> to break bisectability.
Looks like this branch needs to be based on at least 01658f0f (usb: phy:
add a new driver for usb part of control module) to compile. Probably
needs other USB patches too to make sense.
This branch has a high likelihood of conflicting with .dts files, so
Kishon, I suggest you do two branches:
1. A branch for Greg based on top of the USB changes
This branch should contain:
ARM: OMAP4: remove control module address space from PHY and OTG
ARM: OMAP: devices: create device for usb part of control module
ARM: OMAP2: MUSB: Specify omap4 has mailbox
ARM: OMAP: USB: Add phy binding information
Naturally please make sure they compile and boot on their own.
Looks like this will only cause few trivial include merge conflicts
with what I have queued up.
You can add my Acked-by: Tony Lindgren <tony@atomide.com> for those.
2. A branch for Benoit based on v3.8-rc6
That branch should contain all the .dts changes as those will
most likely cause nasty merge conflicts otherwise with what
Benoit has queued up.
Regards,
Tony
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [GIT PULL] ARM part of USB patches
2013-02-05 18:19 ` Tony Lindgren
(?)
@ 2013-02-05 18:37 ` gregkh
-1 siblings, 0 replies; 18+ messages in thread
From: gregkh @ 2013-02-05 18:37 UTC (permalink / raw)
To: Tony Lindgren
Cc: Cousson, Benoit, kishon, Felipe Balbi, linux-usb,
linux-arm-kernel, linux-omap, linux-kernel, linux-doc,
devicetree-discuss, linux
On Tue, Feb 05, 2013 at 10:19:47AM -0800, Tony Lindgren wrote:
> * gregkh@linuxfoundation.org <gregkh@linuxfoundation.org> [130205 09:28]:
> > On Tue, Feb 05, 2013 at 08:56:13PM +0530, kishon wrote:
> > > Hi Tony, Greg,
> > >
> > > On Tuesday 05 February 2013 08:54 PM, kishon wrote:
> > > >Hi Tony,
> > > >
> > > >As discussed, I'm sending a pull request for the arch/arm part of my USB
> > > >patches. These patches are necessary to get MUSB functional in both dt
> > > >and non-dt boot. Also added dt data for dwc3 present in OMAP. This patch
> > > >series *depends* on some of the patches which are merged in usb-next.
> > >
> > > This patch series should go in only after USB. Or else it will break
> > > compilation.
> >
> > Then it probably should go through the USB tree, right? We don't want
> > to break bisectability.
>
> Looks like this branch needs to be based on at least 01658f0f (usb: phy:
> add a new driver for usb part of control module) to compile. Probably
> needs other USB patches too to make sense.
>
> This branch has a high likelihood of conflicting with .dts files, so
> Kishon, I suggest you do two branches:
>
> 1. A branch for Greg based on top of the USB changes
>
> This branch should contain:
>
> ARM: OMAP4: remove control module address space from PHY and OTG
> ARM: OMAP: devices: create device for usb part of control module
> ARM: OMAP2: MUSB: Specify omap4 has mailbox
> ARM: OMAP: USB: Add phy binding information
>
> Naturally please make sure they compile and boot on their own.
> Looks like this will only cause few trivial include merge conflicts
> with what I have queued up.
>
> You can add my Acked-by: Tony Lindgren <tony@atomide.com> for those.
If that happens, please send me patches in email, I don't take git
pull requests, especially for something as small as 4 patches.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [GIT PULL] ARM part of USB patches
@ 2013-02-05 18:37 ` gregkh
0 siblings, 0 replies; 18+ messages in thread
From: gregkh @ 2013-02-05 18:37 UTC (permalink / raw)
To: Tony Lindgren
Cc: Cousson, Benoit, kishon, Felipe Balbi, linux-usb,
linux-arm-kernel, linux-omap, linux-kernel, linux-doc,
devicetree-discuss, linux
On Tue, Feb 05, 2013 at 10:19:47AM -0800, Tony Lindgren wrote:
> * gregkh@linuxfoundation.org <gregkh@linuxfoundation.org> [130205 09:28]:
> > On Tue, Feb 05, 2013 at 08:56:13PM +0530, kishon wrote:
> > > Hi Tony, Greg,
> > >
> > > On Tuesday 05 February 2013 08:54 PM, kishon wrote:
> > > >Hi Tony,
> > > >
> > > >As discussed, I'm sending a pull request for the arch/arm part of my USB
> > > >patches. These patches are necessary to get MUSB functional in both dt
> > > >and non-dt boot. Also added dt data for dwc3 present in OMAP. This patch
> > > >series *depends* on some of the patches which are merged in usb-next.
> > >
> > > This patch series should go in only after USB. Or else it will break
> > > compilation.
> >
> > Then it probably should go through the USB tree, right? We don't want
> > to break bisectability.
>
> Looks like this branch needs to be based on at least 01658f0f (usb: phy:
> add a new driver for usb part of control module) to compile. Probably
> needs other USB patches too to make sense.
>
> This branch has a high likelihood of conflicting with .dts files, so
> Kishon, I suggest you do two branches:
>
> 1. A branch for Greg based on top of the USB changes
>
> This branch should contain:
>
> ARM: OMAP4: remove control module address space from PHY and OTG
> ARM: OMAP: devices: create device for usb part of control module
> ARM: OMAP2: MUSB: Specify omap4 has mailbox
> ARM: OMAP: USB: Add phy binding information
>
> Naturally please make sure they compile and boot on their own.
> Looks like this will only cause few trivial include merge conflicts
> with what I have queued up.
>
> You can add my Acked-by: Tony Lindgren <tony@atomide.com> for those.
If that happens, please send me patches in email, I don't take git
pull requests, especially for something as small as 4 patches.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 18+ messages in thread
* [GIT PULL] ARM part of USB patches
@ 2013-02-05 18:37 ` gregkh
0 siblings, 0 replies; 18+ messages in thread
From: gregkh at linuxfoundation.org @ 2013-02-05 18:37 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Feb 05, 2013 at 10:19:47AM -0800, Tony Lindgren wrote:
> * gregkh at linuxfoundation.org <gregkh@linuxfoundation.org> [130205 09:28]:
> > On Tue, Feb 05, 2013 at 08:56:13PM +0530, kishon wrote:
> > > Hi Tony, Greg,
> > >
> > > On Tuesday 05 February 2013 08:54 PM, kishon wrote:
> > > >Hi Tony,
> > > >
> > > >As discussed, I'm sending a pull request for the arch/arm part of my USB
> > > >patches. These patches are necessary to get MUSB functional in both dt
> > > >and non-dt boot. Also added dt data for dwc3 present in OMAP. This patch
> > > >series *depends* on some of the patches which are merged in usb-next.
> > >
> > > This patch series should go in only after USB. Or else it will break
> > > compilation.
> >
> > Then it probably should go through the USB tree, right? We don't want
> > to break bisectability.
>
> Looks like this branch needs to be based on at least 01658f0f (usb: phy:
> add a new driver for usb part of control module) to compile. Probably
> needs other USB patches too to make sense.
>
> This branch has a high likelihood of conflicting with .dts files, so
> Kishon, I suggest you do two branches:
>
> 1. A branch for Greg based on top of the USB changes
>
> This branch should contain:
>
> ARM: OMAP4: remove control module address space from PHY and OTG
> ARM: OMAP: devices: create device for usb part of control module
> ARM: OMAP2: MUSB: Specify omap4 has mailbox
> ARM: OMAP: USB: Add phy binding information
>
> Naturally please make sure they compile and boot on their own.
> Looks like this will only cause few trivial include merge conflicts
> with what I have queued up.
>
> You can add my Acked-by: Tony Lindgren <tony@atomide.com> for those.
If that happens, please send me patches in email, I don't take git
pull requests, especially for something as small as 4 patches.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 18+ messages in thread
* RE: [GIT PULL] ARM part of USB patches
@ 2013-02-06 5:16 ` Hiremath, Vaibhav
0 siblings, 0 replies; 18+ messages in thread
From: Hiremath, Vaibhav @ 2013-02-06 5:16 UTC (permalink / raw)
To: Tony Lindgren, gregkh, Cousson, Benoit
Cc: linux, linux-doc, devicetree-discuss, linux-usb, linux-kernel,
Balbi, Felipe, ABRAHAM, KISHON VIJAY, linux-omap,
linux-arm-kernel
On Tue, Feb 05, 2013 at 23:49:47, Tony Lindgren wrote:
> * gregkh@linuxfoundation.org <gregkh@linuxfoundation.org> [130205 09:28]:
> > On Tue, Feb 05, 2013 at 08:56:13PM +0530, kishon wrote:
> > > Hi Tony, Greg,
> > >
> > > On Tuesday 05 February 2013 08:54 PM, kishon wrote:
> > > >Hi Tony,
> > > >
> > > >As discussed, I'm sending a pull request for the arch/arm part of my USB
> > > >patches. These patches are necessary to get MUSB functional in both dt
> > > >and non-dt boot. Also added dt data for dwc3 present in OMAP. This patch
> > > >series *depends* on some of the patches which are merged in usb-next.
> > >
> > > This patch series should go in only after USB. Or else it will break
> > > compilation.
> >
> > Then it probably should go through the USB tree, right? We don't want
> > to break bisectability.
>
> Looks like this branch needs to be based on at least 01658f0f (usb: phy:
> add a new driver for usb part of control module) to compile. Probably
> needs other USB patches too to make sense.
>
> This branch has a high likelihood of conflicting with .dts files, so
> Kishon, I suggest you do two branches:
>
> 1. A branch for Greg based on top of the USB changes
>
> This branch should contain:
>
> ARM: OMAP4: remove control module address space from PHY and OTG
> ARM: OMAP: devices: create device for usb part of control module
> ARM: OMAP2: MUSB: Specify omap4 has mailbox
> ARM: OMAP: USB: Add phy binding information
>
> Naturally please make sure they compile and boot on their own.
> Looks like this will only cause few trivial include merge conflicts
> with what I have queued up.
>
> You can add my Acked-by: Tony Lindgren <tony@atomide.com> for those.
>
> 2. A branch for Benoit based on v3.8-rc6
>
> That branch should contain all the .dts changes as those will
> most likely cause nasty merge conflicts otherwise with what
> Benoit has queued up.
>
Tony/Benoit,
There are few AM33xx DTS patches pending from long time, how do you want to
take it forward? You want me to put it into one branch and share? OR just
provide the list of all patches to you?
Thanks,
Vaibhav
> Regards,
>
> Tony
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* RE: [GIT PULL] ARM part of USB patches
@ 2013-02-06 5:16 ` Hiremath, Vaibhav
0 siblings, 0 replies; 18+ messages in thread
From: Hiremath, Vaibhav @ 2013-02-06 5:16 UTC (permalink / raw)
To: Tony Lindgren, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, Cousson, Benoit
Cc: linux-lFZ/pmaqli7XmaaqVzeoHQ, linux-doc-u79uwXL29TY76Z2rM5mHXA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-usb-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Balbi, Felipe, ABRAHAM,
KISHON VIJAY, linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On Tue, Feb 05, 2013 at 23:49:47, Tony Lindgren wrote:
> * gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org> [130205 09:28]:
> > On Tue, Feb 05, 2013 at 08:56:13PM +0530, kishon wrote:
> > > Hi Tony, Greg,
> > >
> > > On Tuesday 05 February 2013 08:54 PM, kishon wrote:
> > > >Hi Tony,
> > > >
> > > >As discussed, I'm sending a pull request for the arch/arm part of my USB
> > > >patches. These patches are necessary to get MUSB functional in both dt
> > > >and non-dt boot. Also added dt data for dwc3 present in OMAP. This patch
> > > >series *depends* on some of the patches which are merged in usb-next.
> > >
> > > This patch series should go in only after USB. Or else it will break
> > > compilation.
> >
> > Then it probably should go through the USB tree, right? We don't want
> > to break bisectability.
>
> Looks like this branch needs to be based on at least 01658f0f (usb: phy:
> add a new driver for usb part of control module) to compile. Probably
> needs other USB patches too to make sense.
>
> This branch has a high likelihood of conflicting with .dts files, so
> Kishon, I suggest you do two branches:
>
> 1. A branch for Greg based on top of the USB changes
>
> This branch should contain:
>
> ARM: OMAP4: remove control module address space from PHY and OTG
> ARM: OMAP: devices: create device for usb part of control module
> ARM: OMAP2: MUSB: Specify omap4 has mailbox
> ARM: OMAP: USB: Add phy binding information
>
> Naturally please make sure they compile and boot on their own.
> Looks like this will only cause few trivial include merge conflicts
> with what I have queued up.
>
> You can add my Acked-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> for those.
>
> 2. A branch for Benoit based on v3.8-rc6
>
> That branch should contain all the .dts changes as those will
> most likely cause nasty merge conflicts otherwise with what
> Benoit has queued up.
>
Tony/Benoit,
There are few AM33xx DTS patches pending from long time, how do you want to
take it forward? You want me to put it into one branch and share? OR just
provide the list of all patches to you?
Thanks,
Vaibhav
> Regards,
>
> Tony
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 18+ messages in thread
* [GIT PULL] ARM part of USB patches
@ 2013-02-06 5:16 ` Hiremath, Vaibhav
0 siblings, 0 replies; 18+ messages in thread
From: Hiremath, Vaibhav @ 2013-02-06 5:16 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Feb 05, 2013 at 23:49:47, Tony Lindgren wrote:
> * gregkh at linuxfoundation.org <gregkh@linuxfoundation.org> [130205 09:28]:
> > On Tue, Feb 05, 2013 at 08:56:13PM +0530, kishon wrote:
> > > Hi Tony, Greg,
> > >
> > > On Tuesday 05 February 2013 08:54 PM, kishon wrote:
> > > >Hi Tony,
> > > >
> > > >As discussed, I'm sending a pull request for the arch/arm part of my USB
> > > >patches. These patches are necessary to get MUSB functional in both dt
> > > >and non-dt boot. Also added dt data for dwc3 present in OMAP. This patch
> > > >series *depends* on some of the patches which are merged in usb-next.
> > >
> > > This patch series should go in only after USB. Or else it will break
> > > compilation.
> >
> > Then it probably should go through the USB tree, right? We don't want
> > to break bisectability.
>
> Looks like this branch needs to be based on at least 01658f0f (usb: phy:
> add a new driver for usb part of control module) to compile. Probably
> needs other USB patches too to make sense.
>
> This branch has a high likelihood of conflicting with .dts files, so
> Kishon, I suggest you do two branches:
>
> 1. A branch for Greg based on top of the USB changes
>
> This branch should contain:
>
> ARM: OMAP4: remove control module address space from PHY and OTG
> ARM: OMAP: devices: create device for usb part of control module
> ARM: OMAP2: MUSB: Specify omap4 has mailbox
> ARM: OMAP: USB: Add phy binding information
>
> Naturally please make sure they compile and boot on their own.
> Looks like this will only cause few trivial include merge conflicts
> with what I have queued up.
>
> You can add my Acked-by: Tony Lindgren <tony@atomide.com> for those.
>
> 2. A branch for Benoit based on v3.8-rc6
>
> That branch should contain all the .dts changes as those will
> most likely cause nasty merge conflicts otherwise with what
> Benoit has queued up.
>
Tony/Benoit,
There are few AM33xx DTS patches pending from long time, how do you want to
take it forward? You want me to put it into one branch and share? OR just
provide the list of all patches to you?
Thanks,
Vaibhav
> Regards,
>
> Tony
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
>
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2013-02-06 5:17 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-02-05 15:24 [GIT PULL] ARM part of USB patches kishon
2013-02-05 15:24 ` kishon
2013-02-05 15:24 ` kishon
2013-02-05 15:26 ` kishon
2013-02-05 15:26 ` kishon
2013-02-05 15:26 ` kishon
2013-02-05 17:27 ` gregkh
2013-02-05 17:27 ` gregkh at linuxfoundation.org
2013-02-05 17:27 ` gregkh
2013-02-05 18:19 ` Tony Lindgren
2013-02-05 18:19 ` Tony Lindgren
2013-02-05 18:19 ` Tony Lindgren
2013-02-05 18:37 ` gregkh
2013-02-05 18:37 ` gregkh at linuxfoundation.org
2013-02-05 18:37 ` gregkh
2013-02-06 5:16 ` Hiremath, Vaibhav
2013-02-06 5:16 ` Hiremath, Vaibhav
2013-02-06 5:16 ` Hiremath, Vaibhav
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.