Re: [PATCH 5/5] i2c: stm32f7: indicate the address being accessed on errors

[Pierre Yves MORDRET <pierre-yves.mordret@foss.st.com>]

Hello all

Looks good to me

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>

Regards

On 2/5/21 9:51 AM, Alain Volmat wrote:
> To help debugging issues, add the address of the slave being
> accessed when getting an error.
> 
> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
> ---
>  drivers/i2c/busses/i2c-stm32f7.c | 9 ++++++---
>  1 file changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
> index f77cd6512a86..ef642fe1eb2c 100644
> --- a/drivers/i2c/busses/i2c-stm32f7.c
> +++ b/drivers/i2c/busses/i2c-stm32f7.c
> @@ -1602,7 +1602,8 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
>  
>  	/* Bus error */
>  	if (status & STM32F7_I2C_ISR_BERR) {
> -		dev_err(dev, "<%s>: Bus error\n", __func__);
> +		dev_err(dev, "<%s>: Bus error accessing addr 0x%x\n",
> +			__func__, f7_msg->addr);
>  		writel_relaxed(STM32F7_I2C_ICR_BERRCF, base + STM32F7_I2C_ICR);
>  		stm32f7_i2c_release_bus(&i2c_dev->adap);
>  		f7_msg->result = -EIO;
> @@ -1610,13 +1611,15 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
>  
>  	/* Arbitration loss */
>  	if (status & STM32F7_I2C_ISR_ARLO) {
> -		dev_dbg(dev, "<%s>: Arbitration loss\n", __func__);
> +		dev_dbg(dev, "<%s>: Arbitration loss accessing addr 0x%x\n",
> +			__func__, f7_msg->addr);
>  		writel_relaxed(STM32F7_I2C_ICR_ARLOCF, base + STM32F7_I2C_ICR);
>  		f7_msg->result = -EAGAIN;
>  	}
>  
>  	if (status & STM32F7_I2C_ISR_PECERR) {
> -		dev_err(dev, "<%s>: PEC error in reception\n", __func__);
> +		dev_err(dev, "<%s>: PEC error in reception accessing addr 0x%x\n",
> +			__func__, f7_msg->addr);
>  		writel_relaxed(STM32F7_I2C_ICR_PECCF, base + STM32F7_I2C_ICR);
>  		f7_msg->result = -EINVAL;
>  	}
> 

-- 
--
~ Py MORDRET
--