* [PATCH v2 0/2] Add mt8173 elm and hana board @ 2020-01-10 7:37 ` Hsin-Yi Wang 0 siblings, 0 replies; 42+ messages in thread From: Hsin-Yi Wang @ 2020-01-10 7:37 UTC (permalink / raw) To: linux-arm-kernel Cc: Rob Herring, Mark Rutland, Matthias Brugger, devicetree, linux-kernel, linux-mediatek, Nicolas Boichat, Enric Balletbo i Serra, Daniel Kurtz This series adds devicetree and binding document for Acer Chromebook R13 (elm) and Lenovo Chromebook (hana), which are using mt8173 as SoC. Changes in v2: - fix mediatek.yaml - fixup some nodes and remove unused nodes in dts Hsin-Yi Wang (2): dt-bindings: arm64: dts: mediatek: Add mt8173 elm and hana arm64: dts: mediatek: add mt8173 elm and hana board .../devicetree/bindings/arm/mediatek.yaml | 27 + arch/arm64/boot/dts/mediatek/Makefile | 3 + .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ 7 files changed, 1188 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi -- 2.25.0.rc1.283.g88dfdc4193-goog ^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v2 0/2] Add mt8173 elm and hana board @ 2020-01-10 7:37 ` Hsin-Yi Wang 0 siblings, 0 replies; 42+ messages in thread From: Hsin-Yi Wang @ 2020-01-10 7:37 UTC (permalink / raw) To: linux-arm-kernel Cc: Mark Rutland, devicetree, Nicolas Boichat, linux-kernel, Daniel Kurtz, Enric Balletbo i Serra, Rob Herring, linux-mediatek, Matthias Brugger This series adds devicetree and binding document for Acer Chromebook R13 (elm) and Lenovo Chromebook (hana), which are using mt8173 as SoC. Changes in v2: - fix mediatek.yaml - fixup some nodes and remove unused nodes in dts Hsin-Yi Wang (2): dt-bindings: arm64: dts: mediatek: Add mt8173 elm and hana arm64: dts: mediatek: add mt8173 elm and hana board .../devicetree/bindings/arm/mediatek.yaml | 27 + arch/arm64/boot/dts/mediatek/Makefile | 3 + .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ 7 files changed, 1188 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi -- 2.25.0.rc1.283.g88dfdc4193-goog _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v2 0/2] Add mt8173 elm and hana board @ 2020-01-10 7:37 ` Hsin-Yi Wang 0 siblings, 0 replies; 42+ messages in thread From: Hsin-Yi Wang @ 2020-01-10 7:37 UTC (permalink / raw) To: linux-arm-kernel Cc: Mark Rutland, devicetree, Nicolas Boichat, linux-kernel, Enric Balletbo i Serra, Rob Herring, linux-mediatek, Matthias Brugger This series adds devicetree and binding document for Acer Chromebook R13 (elm) and Lenovo Chromebook (hana), which are using mt8173 as SoC. Changes in v2: - fix mediatek.yaml - fixup some nodes and remove unused nodes in dts Hsin-Yi Wang (2): dt-bindings: arm64: dts: mediatek: Add mt8173 elm and hana arm64: dts: mediatek: add mt8173 elm and hana board .../devicetree/bindings/arm/mediatek.yaml | 27 + arch/arm64/boot/dts/mediatek/Makefile | 3 + .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ 7 files changed, 1188 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi -- 2.25.0.rc1.283.g88dfdc4193-goog _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v2 1/2] dt-bindings: arm64: dts: mediatek: Add mt8173 elm and hana 2020-01-10 7:37 ` Hsin-Yi Wang (?) @ 2020-01-10 7:37 ` Hsin-Yi Wang -1 siblings, 0 replies; 42+ messages in thread From: Hsin-Yi Wang @ 2020-01-10 7:37 UTC (permalink / raw) To: linux-arm-kernel Cc: Rob Herring, Mark Rutland, Matthias Brugger, devicetree, linux-kernel, linux-mediatek, Nicolas Boichat, Enric Balletbo i Serra, Daniel Kurtz Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 SoC. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> --- Changes in v2: - fix dtbs_check errors, use const instead of enum --- .../devicetree/bindings/arm/mediatek.yaml | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index 4043c5046441..5272899b08fa 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -84,6 +84,33 @@ properties: - enum: - mediatek,mt8135-evbp1 - const: mediatek,mt8135 + - description: Google Elm (Acer Chromebook R13) + items: + - const: google,elm-rev8 + - const: google,elm-rev7 + - const: google,elm-rev6 + - const: google,elm-rev5 + - const: google,elm-rev4 + - const: google,elm-rev3 + - const: google,elm-rev2 + - const: google,elm-rev1 + - const: google,elm + - const: mediatek,mt8173 + - description: Google Hana (Lenovo Chromebook and more) + items: + - const: google,hana-rev6 + - const: google,hana-rev5 + - const: google,hana-rev4 + - const: google,hana-rev3 + - const: google,hana-rev2 + - const: google,hana-rev1 + - const: google,hana-rev0 + - const: google,hana + - const: mediatek,mt8173 + - description: Google Hana rev7 (Poin2 Chromebook 11C) + items: + - const: google,hana-rev7 + - const: mediatek,mt8173 - items: - enum: - mediatek,mt8173-evb -- 2.25.0.rc1.283.g88dfdc4193-goog ^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v2 1/2] dt-bindings: arm64: dts: mediatek: Add mt8173 elm and hana @ 2020-01-10 7:37 ` Hsin-Yi Wang 0 siblings, 0 replies; 42+ messages in thread From: Hsin-Yi Wang @ 2020-01-10 7:37 UTC (permalink / raw) To: linux-arm-kernel Cc: Mark Rutland, devicetree, Nicolas Boichat, linux-kernel, Daniel Kurtz, Enric Balletbo i Serra, Rob Herring, linux-mediatek, Matthias Brugger Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 SoC. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> --- Changes in v2: - fix dtbs_check errors, use const instead of enum --- .../devicetree/bindings/arm/mediatek.yaml | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index 4043c5046441..5272899b08fa 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -84,6 +84,33 @@ properties: - enum: - mediatek,mt8135-evbp1 - const: mediatek,mt8135 + - description: Google Elm (Acer Chromebook R13) + items: + - const: google,elm-rev8 + - const: google,elm-rev7 + - const: google,elm-rev6 + - const: google,elm-rev5 + - const: google,elm-rev4 + - const: google,elm-rev3 + - const: google,elm-rev2 + - const: google,elm-rev1 + - const: google,elm + - const: mediatek,mt8173 + - description: Google Hana (Lenovo Chromebook and more) + items: + - const: google,hana-rev6 + - const: google,hana-rev5 + - const: google,hana-rev4 + - const: google,hana-rev3 + - const: google,hana-rev2 + - const: google,hana-rev1 + - const: google,hana-rev0 + - const: google,hana + - const: mediatek,mt8173 + - description: Google Hana rev7 (Poin2 Chromebook 11C) + items: + - const: google,hana-rev7 + - const: mediatek,mt8173 - items: - enum: - mediatek,mt8173-evb -- 2.25.0.rc1.283.g88dfdc4193-goog _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v2 1/2] dt-bindings: arm64: dts: mediatek: Add mt8173 elm and hana @ 2020-01-10 7:37 ` Hsin-Yi Wang 0 siblings, 0 replies; 42+ messages in thread From: Hsin-Yi Wang @ 2020-01-10 7:37 UTC (permalink / raw) To: linux-arm-kernel Cc: Mark Rutland, devicetree, Nicolas Boichat, linux-kernel, Enric Balletbo i Serra, Rob Herring, linux-mediatek, Matthias Brugger Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 SoC. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> --- Changes in v2: - fix dtbs_check errors, use const instead of enum --- .../devicetree/bindings/arm/mediatek.yaml | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index 4043c5046441..5272899b08fa 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -84,6 +84,33 @@ properties: - enum: - mediatek,mt8135-evbp1 - const: mediatek,mt8135 + - description: Google Elm (Acer Chromebook R13) + items: + - const: google,elm-rev8 + - const: google,elm-rev7 + - const: google,elm-rev6 + - const: google,elm-rev5 + - const: google,elm-rev4 + - const: google,elm-rev3 + - const: google,elm-rev2 + - const: google,elm-rev1 + - const: google,elm + - const: mediatek,mt8173 + - description: Google Hana (Lenovo Chromebook and more) + items: + - const: google,hana-rev6 + - const: google,hana-rev5 + - const: google,hana-rev4 + - const: google,hana-rev3 + - const: google,hana-rev2 + - const: google,hana-rev1 + - const: google,hana-rev0 + - const: google,hana + - const: mediatek,mt8173 + - description: Google Hana rev7 (Poin2 Chromebook 11C) + items: + - const: google,hana-rev7 + - const: mediatek,mt8173 - items: - enum: - mediatek,mt8173-evb -- 2.25.0.rc1.283.g88dfdc4193-goog _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply related [flat|nested] 42+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: arm64: dts: mediatek: Add mt8173 elm and hana 2020-01-10 7:37 ` Hsin-Yi Wang (?) @ 2020-01-10 11:38 ` Enric Balletbo i Serra -1 siblings, 0 replies; 42+ messages in thread From: Enric Balletbo i Serra @ 2020-01-10 11:38 UTC (permalink / raw) To: Hsin-Yi Wang, linux-arm-kernel Cc: Rob Herring, Mark Rutland, Matthias Brugger, devicetree, linux-kernel, linux-mediatek, Nicolas Boichat, Daniel Kurtz Hi Hsin-Yi, Just a nit that is most a decision of the maintainer ... On 10/1/20 8:37, Hsin-Yi Wang wrote: > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > SoC. > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested with patch 2 applied and saw that there is no errors with dtbs_check. Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> > --- > Changes in v2: > - fix dtbs_check errors, use const instead of enum > --- > .../devicetree/bindings/arm/mediatek.yaml | 27 +++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml > index 4043c5046441..5272899b08fa 100644 > --- a/Documentation/devicetree/bindings/arm/mediatek.yaml > +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml > @@ -84,6 +84,33 @@ properties: > - enum: > - mediatek,mt8135-evbp1 > - const: mediatek,mt8135 > + - description: Google Elm (Acer Chromebook R13) > + items: > + - const: google,elm-rev8 > + - const: google,elm-rev7 > + - const: google,elm-rev6 > + - const: google,elm-rev5 > + - const: google,elm-rev4 > + - const: google,elm-rev3 > + - const: google,elm-rev2 > + - const: google,elm-rev1 > + - const: google,elm > + - const: mediatek,mt8173 > + - description: Google Hana (Lenovo Chromebook and more) nit: and more? How many? I'd expect the commercial model names here Lenovo Chromebook C330? Thanks, Enric > + items: > + - const: google,hana-rev6 > + - const: google,hana-rev5 > + - const: google,hana-rev4 > + - const: google,hana-rev3 > + - const: google,hana-rev2 > + - const: google,hana-rev1 > + - const: google,hana-rev0 > + - const: google,hana > + - const: mediatek,mt8173 > + - description: Google Hana rev7 (Poin2 Chromebook 11C) > + items: > + - const: google,hana-rev7 > + - const: mediatek,mt8173 > - items: > - enum: > - mediatek,mt8173-evb > ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: arm64: dts: mediatek: Add mt8173 elm and hana @ 2020-01-10 11:38 ` Enric Balletbo i Serra 0 siblings, 0 replies; 42+ messages in thread From: Enric Balletbo i Serra @ 2020-01-10 11:38 UTC (permalink / raw) To: Hsin-Yi Wang, linux-arm-kernel Cc: Mark Rutland, devicetree, Nicolas Boichat, linux-kernel, Daniel Kurtz, Rob Herring, linux-mediatek, Matthias Brugger Hi Hsin-Yi, Just a nit that is most a decision of the maintainer ... On 10/1/20 8:37, Hsin-Yi Wang wrote: > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > SoC. > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested with patch 2 applied and saw that there is no errors with dtbs_check. Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> > --- > Changes in v2: > - fix dtbs_check errors, use const instead of enum > --- > .../devicetree/bindings/arm/mediatek.yaml | 27 +++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml > index 4043c5046441..5272899b08fa 100644 > --- a/Documentation/devicetree/bindings/arm/mediatek.yaml > +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml > @@ -84,6 +84,33 @@ properties: > - enum: > - mediatek,mt8135-evbp1 > - const: mediatek,mt8135 > + - description: Google Elm (Acer Chromebook R13) > + items: > + - const: google,elm-rev8 > + - const: google,elm-rev7 > + - const: google,elm-rev6 > + - const: google,elm-rev5 > + - const: google,elm-rev4 > + - const: google,elm-rev3 > + - const: google,elm-rev2 > + - const: google,elm-rev1 > + - const: google,elm > + - const: mediatek,mt8173 > + - description: Google Hana (Lenovo Chromebook and more) nit: and more? How many? I'd expect the commercial model names here Lenovo Chromebook C330? Thanks, Enric > + items: > + - const: google,hana-rev6 > + - const: google,hana-rev5 > + - const: google,hana-rev4 > + - const: google,hana-rev3 > + - const: google,hana-rev2 > + - const: google,hana-rev1 > + - const: google,hana-rev0 > + - const: google,hana > + - const: mediatek,mt8173 > + - description: Google Hana rev7 (Poin2 Chromebook 11C) > + items: > + - const: google,hana-rev7 > + - const: mediatek,mt8173 > - items: > - enum: > - mediatek,mt8173-evb > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: arm64: dts: mediatek: Add mt8173 elm and hana @ 2020-01-10 11:38 ` Enric Balletbo i Serra 0 siblings, 0 replies; 42+ messages in thread From: Enric Balletbo i Serra @ 2020-01-10 11:38 UTC (permalink / raw) To: Hsin-Yi Wang, linux-arm-kernel Cc: Mark Rutland, devicetree, Nicolas Boichat, linux-kernel, Rob Herring, linux-mediatek, Matthias Brugger Hi Hsin-Yi, Just a nit that is most a decision of the maintainer ... On 10/1/20 8:37, Hsin-Yi Wang wrote: > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > SoC. > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested with patch 2 applied and saw that there is no errors with dtbs_check. Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> > --- > Changes in v2: > - fix dtbs_check errors, use const instead of enum > --- > .../devicetree/bindings/arm/mediatek.yaml | 27 +++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml > index 4043c5046441..5272899b08fa 100644 > --- a/Documentation/devicetree/bindings/arm/mediatek.yaml > +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml > @@ -84,6 +84,33 @@ properties: > - enum: > - mediatek,mt8135-evbp1 > - const: mediatek,mt8135 > + - description: Google Elm (Acer Chromebook R13) > + items: > + - const: google,elm-rev8 > + - const: google,elm-rev7 > + - const: google,elm-rev6 > + - const: google,elm-rev5 > + - const: google,elm-rev4 > + - const: google,elm-rev3 > + - const: google,elm-rev2 > + - const: google,elm-rev1 > + - const: google,elm > + - const: mediatek,mt8173 > + - description: Google Hana (Lenovo Chromebook and more) nit: and more? How many? I'd expect the commercial model names here Lenovo Chromebook C330? Thanks, Enric > + items: > + - const: google,hana-rev6 > + - const: google,hana-rev5 > + - const: google,hana-rev4 > + - const: google,hana-rev3 > + - const: google,hana-rev2 > + - const: google,hana-rev1 > + - const: google,hana-rev0 > + - const: google,hana > + - const: mediatek,mt8173 > + - description: Google Hana rev7 (Poin2 Chromebook 11C) > + items: > + - const: google,hana-rev7 > + - const: mediatek,mt8173 > - items: > - enum: > - mediatek,mt8173-evb > _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: arm64: dts: mediatek: Add mt8173 elm and hana 2020-01-10 7:37 ` Hsin-Yi Wang (?) @ 2020-01-15 14:52 ` Rob Herring -1 siblings, 0 replies; 42+ messages in thread From: Rob Herring @ 2020-01-15 14:52 UTC (permalink / raw) To: Hsin-Yi Wang Cc: linux-arm-kernel, Mark Rutland, Matthias Brugger, devicetree, linux-kernel, linux-mediatek, Nicolas Boichat, Enric Balletbo i Serra, Daniel Kurtz On Fri, 10 Jan 2020 15:37:29 +0800, Hsin-Yi Wang wrote: > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > SoC. > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > --- > Changes in v2: > - fix dtbs_check errors, use const instead of enum > --- > .../devicetree/bindings/arm/mediatek.yaml | 27 +++++++++++++++++++ > 1 file changed, 27 insertions(+) > Reviewed-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: arm64: dts: mediatek: Add mt8173 elm and hana @ 2020-01-15 14:52 ` Rob Herring 0 siblings, 0 replies; 42+ messages in thread From: Rob Herring @ 2020-01-15 14:52 UTC (permalink / raw) To: Hsin-Yi Wang Cc: Mark Rutland, devicetree, Nicolas Boichat, linux-kernel, Daniel Kurtz, Enric Balletbo i Serra, linux-mediatek, Matthias Brugger, linux-arm-kernel On Fri, 10 Jan 2020 15:37:29 +0800, Hsin-Yi Wang wrote: > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > SoC. > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > --- > Changes in v2: > - fix dtbs_check errors, use const instead of enum > --- > .../devicetree/bindings/arm/mediatek.yaml | 27 +++++++++++++++++++ > 1 file changed, 27 insertions(+) > Reviewed-by: Rob Herring <robh@kernel.org> _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: arm64: dts: mediatek: Add mt8173 elm and hana @ 2020-01-15 14:52 ` Rob Herring 0 siblings, 0 replies; 42+ messages in thread From: Rob Herring @ 2020-01-15 14:52 UTC (permalink / raw) To: Hsin-Yi Wang Cc: Mark Rutland, devicetree, Nicolas Boichat, linux-kernel, Enric Balletbo i Serra, linux-mediatek, Matthias Brugger, linux-arm-kernel On Fri, 10 Jan 2020 15:37:29 +0800, Hsin-Yi Wang wrote: > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > SoC. > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > --- > Changes in v2: > - fix dtbs_check errors, use const instead of enum > --- > .../devicetree/bindings/arm/mediatek.yaml | 27 +++++++++++++++++++ > 1 file changed, 27 insertions(+) > Reviewed-by: Rob Herring <robh@kernel.org> _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board 2020-01-10 7:37 ` Hsin-Yi Wang (?) @ 2020-01-10 7:37 ` Hsin-Yi Wang -1 siblings, 0 replies; 42+ messages in thread From: Hsin-Yi Wang @ 2020-01-10 7:37 UTC (permalink / raw) To: linux-arm-kernel Cc: Rob Herring, Mark Rutland, Matthias Brugger, devicetree, linux-kernel, linux-mediatek, Nicolas Boichat, Enric Balletbo i Serra, Daniel Kurtz Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 SoC. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> --- Changes in v2: - remove downstream nodes and unused nodes - use GPIO_ACTIVE_LOW for ps8640 gpios - move trackpad to hana --- arch/arm64/boot/dts/mediatek/Makefile | 3 + .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ 6 files changed, 1161 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 458bbc422a94..b45a45a565a1 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts new file mode 100644 index 000000000000..a3616bc3d859 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2019 MediaTek Inc. + */ + +/dts-v1/; +#include "mt8173-elm-hana.dtsi" + +/ { + model = "Mediatek Hana rev7 board"; + compatible = "google,hana-rev7", "mediatek,mt8173"; +}; + +&cpu_thermal { + trips { + cpu_crit: cpu_crit@0 { + temperature = <100000>; + type = "critical"; + }; + }; +}; + +&gpio_keys { + /delete-node/tablet_mode; + /delete-node/volume_down; + /delete-node/volume_up; +}; \ No newline at end of file diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts new file mode 100644 index 000000000000..8cbcc75192e3 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2016 MediaTek Inc. + */ + +/dts-v1/; +#include "mt8173-elm-hana.dtsi" + +/ { + model = "Mediatek Hana rev0 board"; + compatible = "google,hana-rev6", + "google,hana-rev5", "google,hana-rev4", + "google,hana-rev3", "google,hana-rev2", + "google,hana-rev1", "google,hana-rev0", + "google,hana", "mediatek,mt8173"; +}; \ No newline at end of file diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi new file mode 100644 index 000000000000..35e12b290947 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2016 MediaTek Inc. + */ + +#include "mt8173-elm.dtsi" + +&i2c0 { + clock-frequency = <200000>; +}; + +&i2c3 { + touchscreen2: touchscreen@34 { + compatible = "melfas,mip4_ts"; + reg = <0x34>; + interrupt-parent = <&pio>; + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; + }; + + touchscreen3: touchscreen@20 { + compatible = "hid-over-i2c"; + reg = <0x20>; + hid-descr-addr = <0x0020>; + interrupt-parent = <&pio>; + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c4 { + trackpad2: trackpad@2c { + compatible = "hid-over-i2c"; + interrupt-parent = <&pio>; + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; + reg = <0x2c>; + hid-descr-addr = <0x0020>; + wakeup-source; + }; +}; + +&mmc1 { + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; +}; + +&pio { + hdmi_mux_pins: hdmi_mux_pins { + pins2 { + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; + bias-pull-up; + output-high; + }; + }; + + mmc1_pins_default: mmc1default { + pins_wp { + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; + input-enable; + bias-pull-up; + }; + }; +}; \ No newline at end of file diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts new file mode 100644 index 000000000000..e5da2355760e --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2016 MediaTek Inc. + */ + +/dts-v1/; +#include "mt8173-elm.dtsi" + +/ { + model = "Mediatek Elm board"; + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", + "google,elm-rev2", "google,elm-rev1", + "google,elm", "mediatek,mt8173"; +}; \ No newline at end of file diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi new file mode 100644 index 000000000000..2ac738bebe04 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi @@ -0,0 +1,1040 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2016 MediaTek Inc. + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "mt8173.dtsi" + +/ { + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + backlight_lcd: backlight_lcd { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 1000000>; + brightness-levels = < + 0 16 32 48 64 80 96 112 + 128 144 160 176 192 208 224 240 + 255 + >; + default-brightness-level = <9>; + power-supply = <&bl_fixed_reg>; + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&disp_pwm0_pins>; + status = "okay"; + }; + + bl_fixed_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "bl_fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <1000>; + enable-active-high; + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_fixed_pins>; + }; + + chosen { + stdout-path = &uart0; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins>; + + lid { + label = "Lid"; + gpios = <&pio 69 GPIO_ACTIVE_LOW>; + linux,code = <0>; /* SW_LID */ + linux,input-type = <5>; /* EV_SW */ + gpio-key,wakeup; + }; + + power { + label = "Power"; + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_POWER>; + debounce-interval = <30>; + gpio-key,wakeup; + }; + + tablet_mode { + label = "Tablet_mode"; + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; + linux,code = <1>; /* SW_TABLET_MODE */ + linux,input-type = <5>; /* EV_SW */ + gpio-key,wakeup; + }; + + volume_down { + label = "Volume_down"; + gpios = <&pio 123 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + volume_up { + label = "Volume_up"; + gpios = <&pio 124 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + panel: panel { + compatible = "lg,lp120up1"; + power-supply = <&panel_fixed_3v3>; + ddc-i2c-bus = <&i2c0>; + backlight = <&backlight_lcd>; + + port { + panel_in: endpoint { + remote-endpoint = <&ps8640_out>; + }; + }; + }; + + panel_fixed_3v3: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "PANEL_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&panel_fixed_pins>; + }; + + ps8640_fixed_1v2: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "PS8640_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <2000>; + enable-active-high; + regulator-boot-on; + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ps8640_fixed_pins>; + }; + + sdio_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; + }; + + sound: sound { + compatible = "mediatek,mt8173-rt5650"; + mediatek,audio-codec = <&rt5650 &hdmi0>; + mediatek,platform = <&afe>; + pinctrl-names = "default"; + pinctrl-0 = <&aud_i2s2>; + + mediatek,mclk = <1>; + codec-capture { + sound-dai = <&rt5650 1>; + }; + }; + + hdmicon: connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + ddc-i2c-bus = <&hdmiddc0>; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + }; +}; + +&cec { + status = "okay"; +}; + +&cpu0 { + proc-supply = <&mt6397_vpca15_reg>; +}; + +&cpu1 { + proc-supply = <&mt6397_vpca15_reg>; +}; + +&cpu2 { + proc-supply = <&da9211_vcpu_reg>; + sram-supply = <&mt6397_vsramca7_reg>; +}; + +&cpu3 { + proc-supply = <&da9211_vcpu_reg>; + sram-supply = <&mt6397_vsramca7_reg>; +}; + +&cpu_thermal { + sustainable-power = <4500>; /* milliwatts */ + trips { + threshold: trip-point@0 { + temperature = <60000>; + }; + + target: trip-point@1 { + temperature = <65000>; + }; + }; +}; + +&dsi0 { + status = "okay"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + dsi0_out: endpoint { + remote-endpoint = <&ps8640_in>; + }; + }; + }; +}; + +&dpi0 { + status = "okay"; +}; + +&hdmi0 { + status = "okay"; + ports { + port@1 { + reg = <1>; + + hdmi0_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +}; + +&hdmi_phy { + status = "okay"; + mediatek,ibias = <0xc>; +}; + +&i2c0 { + status = "okay"; + + rt5650: audio-codec@1a { + compatible = "realtek,rt5650"; + reg = <0x1a>; + avdd-supply = <&mt6397_vgp1_reg>; + cpvdd-supply = <&mt6397_vcama_reg>; + interrupt-parent = <&pio>; + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + pinctrl-names = "default"; + pinctrl-0 = <&rt5650_irq>; + #sound-dai-cells = <1>; + realtek,dmic1-data-pin = <2>; + realtek,jd-mode = <2>; + }; + + ps8640: edp-bridge@8 { + compatible = "parade,ps8640"; + reg = <0x8>; + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ps8640_pins>; + vdd12-supply = <&ps8640_fixed_1v2>; + vdd33-supply = <&mt6397_vgp2_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ps8640_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + ps8640_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; +}; + +&i2c1 { + clock-frequency = <1500000>; + status = "okay"; + + da9211: da9211@68 { + compatible = "dlg,da9211"; + reg = <0x68>; + + regulators { + da9211_vcpu_reg: BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1310000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <4400000>; + regulator-ramp-delay = <10000>; + regulator-always-on; + regulator-allowed-modes = <0 1>; + }; + + da9211_vgpu_reg: BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1310000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <3000000>; + regulator-ramp-delay = <10000>; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + + tpm: tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + powered-while-suspended; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + status = "okay"; + + touchscreen: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&pio>; + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_irq>; + + trackpad: trackpad@15 { + compatible = "elan,ekth3000"; + interrupt-parent = <&pio>; + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; + reg = <0x15>; + vcc-supply = <&mt6397_vgp6_reg>; + wakeup-source; + }; +}; + +&mipi_tx0 { + status = "okay"; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-hw-reset; + hs400-ds-delay = <0x14015>; + mediatek,hs200-cmd-int-delay=<30>; + mediatek,hs400-cmd-int-delay=<14>; + mediatek,hs400-cmd-resp-sel-rising; + vmmc-supply = <&mt6397_vemc_3v3_reg>; + vqmmc-supply = <&mt6397_vio18_reg>; + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; + non-removable; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_uhs>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&mt6397_vmch_reg>; + vqmmc-supply = <&mt6397_vmc_reg>; +}; + +&mmc3 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc3_pins_default>; + pinctrl-1 = <&mmc3_pins_uhs>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + sdr104-clk-delay = <5>; + keep-power-in-suspend; + enable-sdio-wakeup; + cap-sdio-irq; + vmmc-supply = <&sdio_fixed_3v3>; + vqmmc-supply = <&mt6397_vgp3_reg>; + non-removable; + cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + + btmrvl: btmrvl@2 { + compatible = "marvell,sd8897-bt"; + reg = <2>; + interrupt-parent = <&pio>; + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; + marvell,wakeup-pin = /bits/ 16 <0x0d>; + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; + }; + + mwifiex: mwifiex@1 { + compatible = "marvell,sd8897"; + reg = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + marvell,wakeup-pin = <3>; + marvell,caldata_ed_mac = /bits/ 8 < +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 + >; + }; +}; + +&nor_flash { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nor_gpio1_pins>; + bus-width = <8>; + max-frequency = <50000000>; + non-removable; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + }; +}; + +&pio { + aud_i2s2: aud_i2s2 { + pins1 { + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; + bias-pull-down; + }; + }; + + bl_fixed_pins: bl_fixed_pins { + pins1 { + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; + output-low; + }; + }; + + bt_wake_pins: bt_wake_pins { + pins1 { + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; + bias-pull-up; + }; + }; + + disp_pwm0_pins: disp_pwm0_pins { + pins1 { + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; + output-low; + }; + }; + + gpio_keys_pins: gpio_keys_pins { + volume_pins { + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; + bias-pull-up; + }; + + tablet_mode_pins { + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; + bias-pull-up; + }; + }; + + hdmi_mux_pins: hdmi_mux_pins { + pins1 { + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; + }; + }; + + mmc0_pins_default: mmc0default { + pins_cmd_dat { + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; + bias-pull-up; + }; + + pins_clk { + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; + bias-pull-down; + }; + + pins_rst { + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; + bias-pull-up; + }; + }; + + mmc1_pins_default: mmc1default { + pins_cmd_dat { + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_clk { + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; + bias-pull-down; + drive-strength = <MTK_DRIVE_4mA>; + }; + + pins_insert { + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; + bias-pull-up; + }; + }; + + mmc3_pins_default: mmc3default { + pins_dat { + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_cmd { + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_clk { + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; + bias-pull-down; + drive-strength = <MTK_DRIVE_8mA>; + }; + + pins_pdn { + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; + output-low; + }; + }; + + mmc0_pins_uhs: mmc0 { + pins_cmd_dat { + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins_clk { + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; + }; + + pins_ds { + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; + drive-strength = <MTK_DRIVE_10mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; + }; + + pins_rst { + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; + bias-pull-up; + }; + }; + + mmc1_pins_uhs: mmc1 { + pins_cmd_dat { + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_clk { + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + }; + + mmc3_pins_uhs: mmc3 { + pins_dat { + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_cmd { + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_clk { + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + }; + + nor_gpio1_pins: nor { + pins1 { + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, + <MT8173_PIN_8_EINT8__FUNC_SFIN>; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up; + }; + + pins2 { + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up; + }; + + pins_clk { + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up; + }; + }; + + panel_fixed_pins: panel_fixed_pins { + pins1 { + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; + }; + }; + + ps8640_pins: ps8640_pins { + pins1 { + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; + }; + }; + + ps8640_fixed_pins: ps8640_fixed_pins { + pins1 { + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; + }; + }; + + rt5650_irq: rt5650_irq { + pins1 { + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; + bias-pull-down; + }; + }; + + spi_pins_a: spi1 { + pins1 { + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; + bias-pull-up; + }; + + pins_spi { + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; + bias-disable; + }; + }; + + trackpad_irq: trackpad_irq { + pins1 { + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; + input-enable; + bias-pull-up; + }; + }; + + usb_pins: usb@0 { + pins1 { + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; + output-high; + bias-disable; + }; + }; + + wifi_wake_pins: wifi_wake_pins { + pins1 { + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; + bias-pull-up; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwrap { + pmic: mt6397 { + compatible = "mediatek,mt6397"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + mt6397rtc: mt6397rtc { + compatible = "mediatek,mt6397-rtc"; + }; + + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { + compatible = "mediatek,mt6397-pctl-pmic-syscfg", + "syscon"; + reg = <0 0x0000c000 0 0x0108>; + }; + + pio6397: pinctrl@c000 { + compatible = "mediatek,mt6397-pinctrl"; + pins-are-numbered; + gpio-controller; + #gpio-cells = <2>; + }; + + mt6397clock: mt6397clock { + compatible = "mediatek,mt6397-clk"; + #clock-cells = <1>; + }; + + mt6397regulator: mt6397regulator { + compatible = "mediatek,mt6397-regulator"; + + mt6397_vpca15_reg: buck_vpca15 { + regulator-compatible = "buck_vpca15"; + regulator-name = "vpca15"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + regulator-allowed-modes = <0 1>; + }; + + mt6397_vpca7_reg: buck_vpca7 { + regulator-compatible = "buck_vpca7"; + regulator-name = "vpca7"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + regulator-always-on; + }; + + mt6397_vsramca15_reg: buck_vsramca15 { + regulator-compatible = "buck_vsramca15"; + regulator-name = "vsramca15"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vsramca7_reg: buck_vsramca7 { + regulator-compatible = "buck_vsramca7"; + regulator-name = "vsramca7"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vcore_reg: buck_vcore { + regulator-compatible = "buck_vcore"; + regulator-name = "vcore"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vgpu_reg: buck_vgpu { + regulator-compatible = "buck_vgpu"; + regulator-name = "vgpu"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + }; + + mt6397_vdrm_reg: buck_vdrm { + regulator-compatible = "buck_vdrm"; + regulator-name = "vdrm"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vio18_reg: buck_vio18 { + regulator-compatible = "buck_vio18"; + regulator-name = "vio18"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vtcxo_reg: ldo_vtcxo { + regulator-compatible = "ldo_vtcxo"; + regulator-name = "vtcxo"; + regulator-always-on; + }; + + mt6397_va28_reg: ldo_va28 { + regulator-compatible = "ldo_va28"; + regulator-name = "va28"; + }; + + mt6397_vcama_reg: ldo_vcama { + regulator-compatible = "ldo_vcama"; + regulator-name = "vcama"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vio28_reg: ldo_vio28 { + regulator-compatible = "ldo_vio28"; + regulator-name = "vio28"; + regulator-always-on; + }; + + mt6397_vusb_reg: ldo_vusb { + regulator-compatible = "ldo_vusb"; + regulator-name = "vusb"; + }; + + mt6397_vmc_reg: ldo_vmc { + regulator-compatible = "ldo_vmc"; + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vmch_reg: ldo_vmch { + regulator-compatible = "ldo_vmch"; + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vemc_3v3_reg: ldo_vemc3v3 { + regulator-compatible = "ldo_vemc3v3"; + regulator-name = "vemc_3v3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp1_reg: ldo_vgp1 { + regulator-compatible = "ldo_vgp1"; + regulator-name = "vcamd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <240>; + }; + + mt6397_vgp2_reg: ldo_vgp2 { + regulator-compatible = "ldo_vgp2"; + regulator-name = "vcamio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp3_reg: ldo_vgp3 { + regulator-compatible = "ldo_vgp3"; + regulator-name = "vcamaf"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp4_reg: ldo_vgp4 { + regulator-compatible = "ldo_vgp4"; + regulator-name = "vgp4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp5_reg: ldo_vgp5 { + regulator-compatible = "ldo_vgp5"; + regulator-name = "vgp5"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp6_reg: ldo_vgp6 { + regulator-compatible = "ldo_vgp6"; + regulator-name = "vgp6"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + regulator-always-on; + }; + + mt6397_vibr_reg: ldo_vibr { + regulator-compatible = "ldo_vibr"; + regulator-name = "vibr"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + }; + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_a>; + mediatek,pad-select = <1>; + status = "okay"; + /* clients */ + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0x0>; + spi-max-frequency = <12000000>; + interrupt-parent = <&pio>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + google,cros-ec-spi-msg-delay = <500>; + + i2c_tunnel: i2c-tunnel@0 { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <1>; + }; + }; + }; +}; + +&thermal { + bank0-supply = <&mt6397_vpca15_reg>; + bank1-supply = <&da9211_vcpu_reg>; +}; + +&uart0 { + status = "okay"; +}; + +&ssusb { + dr_mode = "host"; + wakeup-source; + vusb33-supply = <&mt6397_vusb_reg>; + status = "okay"; +}; + +&usb_host { + pinctrl-names = "default"; + pinctrl-0 = <&usb_pins>; + vusb33-supply = <&mt6397_vusb_reg>; + status = "okay"; +}; + +#include "../../../../arm/boot/dts/cros-ec-keyboard.dtsi" \ No newline at end of file -- 2.25.0.rc1.283.g88dfdc4193-goog ^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board @ 2020-01-10 7:37 ` Hsin-Yi Wang 0 siblings, 0 replies; 42+ messages in thread From: Hsin-Yi Wang @ 2020-01-10 7:37 UTC (permalink / raw) To: linux-arm-kernel Cc: Mark Rutland, devicetree, Nicolas Boichat, linux-kernel, Daniel Kurtz, Enric Balletbo i Serra, Rob Herring, linux-mediatek, Matthias Brugger Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 SoC. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> --- Changes in v2: - remove downstream nodes and unused nodes - use GPIO_ACTIVE_LOW for ps8640 gpios - move trackpad to hana --- arch/arm64/boot/dts/mediatek/Makefile | 3 + .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ 6 files changed, 1161 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 458bbc422a94..b45a45a565a1 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts new file mode 100644 index 000000000000..a3616bc3d859 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2019 MediaTek Inc. + */ + +/dts-v1/; +#include "mt8173-elm-hana.dtsi" + +/ { + model = "Mediatek Hana rev7 board"; + compatible = "google,hana-rev7", "mediatek,mt8173"; +}; + +&cpu_thermal { + trips { + cpu_crit: cpu_crit@0 { + temperature = <100000>; + type = "critical"; + }; + }; +}; + +&gpio_keys { + /delete-node/tablet_mode; + /delete-node/volume_down; + /delete-node/volume_up; +}; \ No newline at end of file diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts new file mode 100644 index 000000000000..8cbcc75192e3 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2016 MediaTek Inc. + */ + +/dts-v1/; +#include "mt8173-elm-hana.dtsi" + +/ { + model = "Mediatek Hana rev0 board"; + compatible = "google,hana-rev6", + "google,hana-rev5", "google,hana-rev4", + "google,hana-rev3", "google,hana-rev2", + "google,hana-rev1", "google,hana-rev0", + "google,hana", "mediatek,mt8173"; +}; \ No newline at end of file diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi new file mode 100644 index 000000000000..35e12b290947 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2016 MediaTek Inc. + */ + +#include "mt8173-elm.dtsi" + +&i2c0 { + clock-frequency = <200000>; +}; + +&i2c3 { + touchscreen2: touchscreen@34 { + compatible = "melfas,mip4_ts"; + reg = <0x34>; + interrupt-parent = <&pio>; + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; + }; + + touchscreen3: touchscreen@20 { + compatible = "hid-over-i2c"; + reg = <0x20>; + hid-descr-addr = <0x0020>; + interrupt-parent = <&pio>; + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c4 { + trackpad2: trackpad@2c { + compatible = "hid-over-i2c"; + interrupt-parent = <&pio>; + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; + reg = <0x2c>; + hid-descr-addr = <0x0020>; + wakeup-source; + }; +}; + +&mmc1 { + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; +}; + +&pio { + hdmi_mux_pins: hdmi_mux_pins { + pins2 { + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; + bias-pull-up; + output-high; + }; + }; + + mmc1_pins_default: mmc1default { + pins_wp { + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; + input-enable; + bias-pull-up; + }; + }; +}; \ No newline at end of file diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts new file mode 100644 index 000000000000..e5da2355760e --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2016 MediaTek Inc. + */ + +/dts-v1/; +#include "mt8173-elm.dtsi" + +/ { + model = "Mediatek Elm board"; + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", + "google,elm-rev2", "google,elm-rev1", + "google,elm", "mediatek,mt8173"; +}; \ No newline at end of file diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi new file mode 100644 index 000000000000..2ac738bebe04 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi @@ -0,0 +1,1040 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2016 MediaTek Inc. + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "mt8173.dtsi" + +/ { + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + backlight_lcd: backlight_lcd { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 1000000>; + brightness-levels = < + 0 16 32 48 64 80 96 112 + 128 144 160 176 192 208 224 240 + 255 + >; + default-brightness-level = <9>; + power-supply = <&bl_fixed_reg>; + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&disp_pwm0_pins>; + status = "okay"; + }; + + bl_fixed_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "bl_fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <1000>; + enable-active-high; + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_fixed_pins>; + }; + + chosen { + stdout-path = &uart0; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins>; + + lid { + label = "Lid"; + gpios = <&pio 69 GPIO_ACTIVE_LOW>; + linux,code = <0>; /* SW_LID */ + linux,input-type = <5>; /* EV_SW */ + gpio-key,wakeup; + }; + + power { + label = "Power"; + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_POWER>; + debounce-interval = <30>; + gpio-key,wakeup; + }; + + tablet_mode { + label = "Tablet_mode"; + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; + linux,code = <1>; /* SW_TABLET_MODE */ + linux,input-type = <5>; /* EV_SW */ + gpio-key,wakeup; + }; + + volume_down { + label = "Volume_down"; + gpios = <&pio 123 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + volume_up { + label = "Volume_up"; + gpios = <&pio 124 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + panel: panel { + compatible = "lg,lp120up1"; + power-supply = <&panel_fixed_3v3>; + ddc-i2c-bus = <&i2c0>; + backlight = <&backlight_lcd>; + + port { + panel_in: endpoint { + remote-endpoint = <&ps8640_out>; + }; + }; + }; + + panel_fixed_3v3: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "PANEL_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&panel_fixed_pins>; + }; + + ps8640_fixed_1v2: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "PS8640_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <2000>; + enable-active-high; + regulator-boot-on; + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ps8640_fixed_pins>; + }; + + sdio_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; + }; + + sound: sound { + compatible = "mediatek,mt8173-rt5650"; + mediatek,audio-codec = <&rt5650 &hdmi0>; + mediatek,platform = <&afe>; + pinctrl-names = "default"; + pinctrl-0 = <&aud_i2s2>; + + mediatek,mclk = <1>; + codec-capture { + sound-dai = <&rt5650 1>; + }; + }; + + hdmicon: connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + ddc-i2c-bus = <&hdmiddc0>; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + }; +}; + +&cec { + status = "okay"; +}; + +&cpu0 { + proc-supply = <&mt6397_vpca15_reg>; +}; + +&cpu1 { + proc-supply = <&mt6397_vpca15_reg>; +}; + +&cpu2 { + proc-supply = <&da9211_vcpu_reg>; + sram-supply = <&mt6397_vsramca7_reg>; +}; + +&cpu3 { + proc-supply = <&da9211_vcpu_reg>; + sram-supply = <&mt6397_vsramca7_reg>; +}; + +&cpu_thermal { + sustainable-power = <4500>; /* milliwatts */ + trips { + threshold: trip-point@0 { + temperature = <60000>; + }; + + target: trip-point@1 { + temperature = <65000>; + }; + }; +}; + +&dsi0 { + status = "okay"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + dsi0_out: endpoint { + remote-endpoint = <&ps8640_in>; + }; + }; + }; +}; + +&dpi0 { + status = "okay"; +}; + +&hdmi0 { + status = "okay"; + ports { + port@1 { + reg = <1>; + + hdmi0_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +}; + +&hdmi_phy { + status = "okay"; + mediatek,ibias = <0xc>; +}; + +&i2c0 { + status = "okay"; + + rt5650: audio-codec@1a { + compatible = "realtek,rt5650"; + reg = <0x1a>; + avdd-supply = <&mt6397_vgp1_reg>; + cpvdd-supply = <&mt6397_vcama_reg>; + interrupt-parent = <&pio>; + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + pinctrl-names = "default"; + pinctrl-0 = <&rt5650_irq>; + #sound-dai-cells = <1>; + realtek,dmic1-data-pin = <2>; + realtek,jd-mode = <2>; + }; + + ps8640: edp-bridge@8 { + compatible = "parade,ps8640"; + reg = <0x8>; + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ps8640_pins>; + vdd12-supply = <&ps8640_fixed_1v2>; + vdd33-supply = <&mt6397_vgp2_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ps8640_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + ps8640_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; +}; + +&i2c1 { + clock-frequency = <1500000>; + status = "okay"; + + da9211: da9211@68 { + compatible = "dlg,da9211"; + reg = <0x68>; + + regulators { + da9211_vcpu_reg: BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1310000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <4400000>; + regulator-ramp-delay = <10000>; + regulator-always-on; + regulator-allowed-modes = <0 1>; + }; + + da9211_vgpu_reg: BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1310000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <3000000>; + regulator-ramp-delay = <10000>; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + + tpm: tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + powered-while-suspended; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + status = "okay"; + + touchscreen: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&pio>; + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_irq>; + + trackpad: trackpad@15 { + compatible = "elan,ekth3000"; + interrupt-parent = <&pio>; + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; + reg = <0x15>; + vcc-supply = <&mt6397_vgp6_reg>; + wakeup-source; + }; +}; + +&mipi_tx0 { + status = "okay"; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-hw-reset; + hs400-ds-delay = <0x14015>; + mediatek,hs200-cmd-int-delay=<30>; + mediatek,hs400-cmd-int-delay=<14>; + mediatek,hs400-cmd-resp-sel-rising; + vmmc-supply = <&mt6397_vemc_3v3_reg>; + vqmmc-supply = <&mt6397_vio18_reg>; + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; + non-removable; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_uhs>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&mt6397_vmch_reg>; + vqmmc-supply = <&mt6397_vmc_reg>; +}; + +&mmc3 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc3_pins_default>; + pinctrl-1 = <&mmc3_pins_uhs>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + sdr104-clk-delay = <5>; + keep-power-in-suspend; + enable-sdio-wakeup; + cap-sdio-irq; + vmmc-supply = <&sdio_fixed_3v3>; + vqmmc-supply = <&mt6397_vgp3_reg>; + non-removable; + cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + + btmrvl: btmrvl@2 { + compatible = "marvell,sd8897-bt"; + reg = <2>; + interrupt-parent = <&pio>; + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; + marvell,wakeup-pin = /bits/ 16 <0x0d>; + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; + }; + + mwifiex: mwifiex@1 { + compatible = "marvell,sd8897"; + reg = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + marvell,wakeup-pin = <3>; + marvell,caldata_ed_mac = /bits/ 8 < +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 + >; + }; +}; + +&nor_flash { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nor_gpio1_pins>; + bus-width = <8>; + max-frequency = <50000000>; + non-removable; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + }; +}; + +&pio { + aud_i2s2: aud_i2s2 { + pins1 { + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; + bias-pull-down; + }; + }; + + bl_fixed_pins: bl_fixed_pins { + pins1 { + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; + output-low; + }; + }; + + bt_wake_pins: bt_wake_pins { + pins1 { + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; + bias-pull-up; + }; + }; + + disp_pwm0_pins: disp_pwm0_pins { + pins1 { + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; + output-low; + }; + }; + + gpio_keys_pins: gpio_keys_pins { + volume_pins { + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; + bias-pull-up; + }; + + tablet_mode_pins { + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; + bias-pull-up; + }; + }; + + hdmi_mux_pins: hdmi_mux_pins { + pins1 { + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; + }; + }; + + mmc0_pins_default: mmc0default { + pins_cmd_dat { + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; + bias-pull-up; + }; + + pins_clk { + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; + bias-pull-down; + }; + + pins_rst { + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; + bias-pull-up; + }; + }; + + mmc1_pins_default: mmc1default { + pins_cmd_dat { + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_clk { + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; + bias-pull-down; + drive-strength = <MTK_DRIVE_4mA>; + }; + + pins_insert { + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; + bias-pull-up; + }; + }; + + mmc3_pins_default: mmc3default { + pins_dat { + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_cmd { + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_clk { + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; + bias-pull-down; + drive-strength = <MTK_DRIVE_8mA>; + }; + + pins_pdn { + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; + output-low; + }; + }; + + mmc0_pins_uhs: mmc0 { + pins_cmd_dat { + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins_clk { + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; + }; + + pins_ds { + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; + drive-strength = <MTK_DRIVE_10mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; + }; + + pins_rst { + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; + bias-pull-up; + }; + }; + + mmc1_pins_uhs: mmc1 { + pins_cmd_dat { + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_clk { + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + }; + + mmc3_pins_uhs: mmc3 { + pins_dat { + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_cmd { + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_clk { + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + }; + + nor_gpio1_pins: nor { + pins1 { + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, + <MT8173_PIN_8_EINT8__FUNC_SFIN>; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up; + }; + + pins2 { + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up; + }; + + pins_clk { + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up; + }; + }; + + panel_fixed_pins: panel_fixed_pins { + pins1 { + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; + }; + }; + + ps8640_pins: ps8640_pins { + pins1 { + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; + }; + }; + + ps8640_fixed_pins: ps8640_fixed_pins { + pins1 { + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; + }; + }; + + rt5650_irq: rt5650_irq { + pins1 { + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; + bias-pull-down; + }; + }; + + spi_pins_a: spi1 { + pins1 { + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; + bias-pull-up; + }; + + pins_spi { + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; + bias-disable; + }; + }; + + trackpad_irq: trackpad_irq { + pins1 { + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; + input-enable; + bias-pull-up; + }; + }; + + usb_pins: usb@0 { + pins1 { + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; + output-high; + bias-disable; + }; + }; + + wifi_wake_pins: wifi_wake_pins { + pins1 { + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; + bias-pull-up; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwrap { + pmic: mt6397 { + compatible = "mediatek,mt6397"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + mt6397rtc: mt6397rtc { + compatible = "mediatek,mt6397-rtc"; + }; + + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { + compatible = "mediatek,mt6397-pctl-pmic-syscfg", + "syscon"; + reg = <0 0x0000c000 0 0x0108>; + }; + + pio6397: pinctrl@c000 { + compatible = "mediatek,mt6397-pinctrl"; + pins-are-numbered; + gpio-controller; + #gpio-cells = <2>; + }; + + mt6397clock: mt6397clock { + compatible = "mediatek,mt6397-clk"; + #clock-cells = <1>; + }; + + mt6397regulator: mt6397regulator { + compatible = "mediatek,mt6397-regulator"; + + mt6397_vpca15_reg: buck_vpca15 { + regulator-compatible = "buck_vpca15"; + regulator-name = "vpca15"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + regulator-allowed-modes = <0 1>; + }; + + mt6397_vpca7_reg: buck_vpca7 { + regulator-compatible = "buck_vpca7"; + regulator-name = "vpca7"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + regulator-always-on; + }; + + mt6397_vsramca15_reg: buck_vsramca15 { + regulator-compatible = "buck_vsramca15"; + regulator-name = "vsramca15"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vsramca7_reg: buck_vsramca7 { + regulator-compatible = "buck_vsramca7"; + regulator-name = "vsramca7"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vcore_reg: buck_vcore { + regulator-compatible = "buck_vcore"; + regulator-name = "vcore"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vgpu_reg: buck_vgpu { + regulator-compatible = "buck_vgpu"; + regulator-name = "vgpu"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + }; + + mt6397_vdrm_reg: buck_vdrm { + regulator-compatible = "buck_vdrm"; + regulator-name = "vdrm"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vio18_reg: buck_vio18 { + regulator-compatible = "buck_vio18"; + regulator-name = "vio18"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vtcxo_reg: ldo_vtcxo { + regulator-compatible = "ldo_vtcxo"; + regulator-name = "vtcxo"; + regulator-always-on; + }; + + mt6397_va28_reg: ldo_va28 { + regulator-compatible = "ldo_va28"; + regulator-name = "va28"; + }; + + mt6397_vcama_reg: ldo_vcama { + regulator-compatible = "ldo_vcama"; + regulator-name = "vcama"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vio28_reg: ldo_vio28 { + regulator-compatible = "ldo_vio28"; + regulator-name = "vio28"; + regulator-always-on; + }; + + mt6397_vusb_reg: ldo_vusb { + regulator-compatible = "ldo_vusb"; + regulator-name = "vusb"; + }; + + mt6397_vmc_reg: ldo_vmc { + regulator-compatible = "ldo_vmc"; + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vmch_reg: ldo_vmch { + regulator-compatible = "ldo_vmch"; + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vemc_3v3_reg: ldo_vemc3v3 { + regulator-compatible = "ldo_vemc3v3"; + regulator-name = "vemc_3v3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp1_reg: ldo_vgp1 { + regulator-compatible = "ldo_vgp1"; + regulator-name = "vcamd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <240>; + }; + + mt6397_vgp2_reg: ldo_vgp2 { + regulator-compatible = "ldo_vgp2"; + regulator-name = "vcamio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp3_reg: ldo_vgp3 { + regulator-compatible = "ldo_vgp3"; + regulator-name = "vcamaf"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp4_reg: ldo_vgp4 { + regulator-compatible = "ldo_vgp4"; + regulator-name = "vgp4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp5_reg: ldo_vgp5 { + regulator-compatible = "ldo_vgp5"; + regulator-name = "vgp5"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp6_reg: ldo_vgp6 { + regulator-compatible = "ldo_vgp6"; + regulator-name = "vgp6"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + regulator-always-on; + }; + + mt6397_vibr_reg: ldo_vibr { + regulator-compatible = "ldo_vibr"; + regulator-name = "vibr"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + }; + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_a>; + mediatek,pad-select = <1>; + status = "okay"; + /* clients */ + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0x0>; + spi-max-frequency = <12000000>; + interrupt-parent = <&pio>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + google,cros-ec-spi-msg-delay = <500>; + + i2c_tunnel: i2c-tunnel@0 { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <1>; + }; + }; + }; +}; + +&thermal { + bank0-supply = <&mt6397_vpca15_reg>; + bank1-supply = <&da9211_vcpu_reg>; +}; + +&uart0 { + status = "okay"; +}; + +&ssusb { + dr_mode = "host"; + wakeup-source; + vusb33-supply = <&mt6397_vusb_reg>; + status = "okay"; +}; + +&usb_host { + pinctrl-names = "default"; + pinctrl-0 = <&usb_pins>; + vusb33-supply = <&mt6397_vusb_reg>; + status = "okay"; +}; + +#include "../../../../arm/boot/dts/cros-ec-keyboard.dtsi" \ No newline at end of file -- 2.25.0.rc1.283.g88dfdc4193-goog _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board @ 2020-01-10 7:37 ` Hsin-Yi Wang 0 siblings, 0 replies; 42+ messages in thread From: Hsin-Yi Wang @ 2020-01-10 7:37 UTC (permalink / raw) To: linux-arm-kernel Cc: Mark Rutland, devicetree, Nicolas Boichat, linux-kernel, Enric Balletbo i Serra, Rob Herring, linux-mediatek, Matthias Brugger Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 SoC. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> --- Changes in v2: - remove downstream nodes and unused nodes - use GPIO_ACTIVE_LOW for ps8640 gpios - move trackpad to hana --- arch/arm64/boot/dts/mediatek/Makefile | 3 + .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ 6 files changed, 1161 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 458bbc422a94..b45a45a565a1 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts new file mode 100644 index 000000000000..a3616bc3d859 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2019 MediaTek Inc. + */ + +/dts-v1/; +#include "mt8173-elm-hana.dtsi" + +/ { + model = "Mediatek Hana rev7 board"; + compatible = "google,hana-rev7", "mediatek,mt8173"; +}; + +&cpu_thermal { + trips { + cpu_crit: cpu_crit@0 { + temperature = <100000>; + type = "critical"; + }; + }; +}; + +&gpio_keys { + /delete-node/tablet_mode; + /delete-node/volume_down; + /delete-node/volume_up; +}; \ No newline at end of file diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts new file mode 100644 index 000000000000..8cbcc75192e3 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2016 MediaTek Inc. + */ + +/dts-v1/; +#include "mt8173-elm-hana.dtsi" + +/ { + model = "Mediatek Hana rev0 board"; + compatible = "google,hana-rev6", + "google,hana-rev5", "google,hana-rev4", + "google,hana-rev3", "google,hana-rev2", + "google,hana-rev1", "google,hana-rev0", + "google,hana", "mediatek,mt8173"; +}; \ No newline at end of file diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi new file mode 100644 index 000000000000..35e12b290947 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2016 MediaTek Inc. + */ + +#include "mt8173-elm.dtsi" + +&i2c0 { + clock-frequency = <200000>; +}; + +&i2c3 { + touchscreen2: touchscreen@34 { + compatible = "melfas,mip4_ts"; + reg = <0x34>; + interrupt-parent = <&pio>; + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; + }; + + touchscreen3: touchscreen@20 { + compatible = "hid-over-i2c"; + reg = <0x20>; + hid-descr-addr = <0x0020>; + interrupt-parent = <&pio>; + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c4 { + trackpad2: trackpad@2c { + compatible = "hid-over-i2c"; + interrupt-parent = <&pio>; + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; + reg = <0x2c>; + hid-descr-addr = <0x0020>; + wakeup-source; + }; +}; + +&mmc1 { + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; +}; + +&pio { + hdmi_mux_pins: hdmi_mux_pins { + pins2 { + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; + bias-pull-up; + output-high; + }; + }; + + mmc1_pins_default: mmc1default { + pins_wp { + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; + input-enable; + bias-pull-up; + }; + }; +}; \ No newline at end of file diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts new file mode 100644 index 000000000000..e5da2355760e --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2016 MediaTek Inc. + */ + +/dts-v1/; +#include "mt8173-elm.dtsi" + +/ { + model = "Mediatek Elm board"; + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", + "google,elm-rev2", "google,elm-rev1", + "google,elm", "mediatek,mt8173"; +}; \ No newline at end of file diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi new file mode 100644 index 000000000000..2ac738bebe04 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi @@ -0,0 +1,1040 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2016 MediaTek Inc. + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "mt8173.dtsi" + +/ { + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + backlight_lcd: backlight_lcd { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 1000000>; + brightness-levels = < + 0 16 32 48 64 80 96 112 + 128 144 160 176 192 208 224 240 + 255 + >; + default-brightness-level = <9>; + power-supply = <&bl_fixed_reg>; + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&disp_pwm0_pins>; + status = "okay"; + }; + + bl_fixed_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "bl_fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <1000>; + enable-active-high; + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_fixed_pins>; + }; + + chosen { + stdout-path = &uart0; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins>; + + lid { + label = "Lid"; + gpios = <&pio 69 GPIO_ACTIVE_LOW>; + linux,code = <0>; /* SW_LID */ + linux,input-type = <5>; /* EV_SW */ + gpio-key,wakeup; + }; + + power { + label = "Power"; + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_POWER>; + debounce-interval = <30>; + gpio-key,wakeup; + }; + + tablet_mode { + label = "Tablet_mode"; + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; + linux,code = <1>; /* SW_TABLET_MODE */ + linux,input-type = <5>; /* EV_SW */ + gpio-key,wakeup; + }; + + volume_down { + label = "Volume_down"; + gpios = <&pio 123 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + volume_up { + label = "Volume_up"; + gpios = <&pio 124 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + panel: panel { + compatible = "lg,lp120up1"; + power-supply = <&panel_fixed_3v3>; + ddc-i2c-bus = <&i2c0>; + backlight = <&backlight_lcd>; + + port { + panel_in: endpoint { + remote-endpoint = <&ps8640_out>; + }; + }; + }; + + panel_fixed_3v3: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "PANEL_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&panel_fixed_pins>; + }; + + ps8640_fixed_1v2: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "PS8640_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <2000>; + enable-active-high; + regulator-boot-on; + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ps8640_fixed_pins>; + }; + + sdio_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; + }; + + sound: sound { + compatible = "mediatek,mt8173-rt5650"; + mediatek,audio-codec = <&rt5650 &hdmi0>; + mediatek,platform = <&afe>; + pinctrl-names = "default"; + pinctrl-0 = <&aud_i2s2>; + + mediatek,mclk = <1>; + codec-capture { + sound-dai = <&rt5650 1>; + }; + }; + + hdmicon: connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + ddc-i2c-bus = <&hdmiddc0>; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + }; +}; + +&cec { + status = "okay"; +}; + +&cpu0 { + proc-supply = <&mt6397_vpca15_reg>; +}; + +&cpu1 { + proc-supply = <&mt6397_vpca15_reg>; +}; + +&cpu2 { + proc-supply = <&da9211_vcpu_reg>; + sram-supply = <&mt6397_vsramca7_reg>; +}; + +&cpu3 { + proc-supply = <&da9211_vcpu_reg>; + sram-supply = <&mt6397_vsramca7_reg>; +}; + +&cpu_thermal { + sustainable-power = <4500>; /* milliwatts */ + trips { + threshold: trip-point@0 { + temperature = <60000>; + }; + + target: trip-point@1 { + temperature = <65000>; + }; + }; +}; + +&dsi0 { + status = "okay"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + dsi0_out: endpoint { + remote-endpoint = <&ps8640_in>; + }; + }; + }; +}; + +&dpi0 { + status = "okay"; +}; + +&hdmi0 { + status = "okay"; + ports { + port@1 { + reg = <1>; + + hdmi0_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +}; + +&hdmi_phy { + status = "okay"; + mediatek,ibias = <0xc>; +}; + +&i2c0 { + status = "okay"; + + rt5650: audio-codec@1a { + compatible = "realtek,rt5650"; + reg = <0x1a>; + avdd-supply = <&mt6397_vgp1_reg>; + cpvdd-supply = <&mt6397_vcama_reg>; + interrupt-parent = <&pio>; + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + pinctrl-names = "default"; + pinctrl-0 = <&rt5650_irq>; + #sound-dai-cells = <1>; + realtek,dmic1-data-pin = <2>; + realtek,jd-mode = <2>; + }; + + ps8640: edp-bridge@8 { + compatible = "parade,ps8640"; + reg = <0x8>; + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ps8640_pins>; + vdd12-supply = <&ps8640_fixed_1v2>; + vdd33-supply = <&mt6397_vgp2_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ps8640_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + ps8640_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; +}; + +&i2c1 { + clock-frequency = <1500000>; + status = "okay"; + + da9211: da9211@68 { + compatible = "dlg,da9211"; + reg = <0x68>; + + regulators { + da9211_vcpu_reg: BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1310000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <4400000>; + regulator-ramp-delay = <10000>; + regulator-always-on; + regulator-allowed-modes = <0 1>; + }; + + da9211_vgpu_reg: BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1310000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <3000000>; + regulator-ramp-delay = <10000>; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + + tpm: tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + powered-while-suspended; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + status = "okay"; + + touchscreen: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&pio>; + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_irq>; + + trackpad: trackpad@15 { + compatible = "elan,ekth3000"; + interrupt-parent = <&pio>; + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; + reg = <0x15>; + vcc-supply = <&mt6397_vgp6_reg>; + wakeup-source; + }; +}; + +&mipi_tx0 { + status = "okay"; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-hw-reset; + hs400-ds-delay = <0x14015>; + mediatek,hs200-cmd-int-delay=<30>; + mediatek,hs400-cmd-int-delay=<14>; + mediatek,hs400-cmd-resp-sel-rising; + vmmc-supply = <&mt6397_vemc_3v3_reg>; + vqmmc-supply = <&mt6397_vio18_reg>; + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; + non-removable; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_uhs>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&mt6397_vmch_reg>; + vqmmc-supply = <&mt6397_vmc_reg>; +}; + +&mmc3 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc3_pins_default>; + pinctrl-1 = <&mmc3_pins_uhs>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + sdr104-clk-delay = <5>; + keep-power-in-suspend; + enable-sdio-wakeup; + cap-sdio-irq; + vmmc-supply = <&sdio_fixed_3v3>; + vqmmc-supply = <&mt6397_vgp3_reg>; + non-removable; + cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + + btmrvl: btmrvl@2 { + compatible = "marvell,sd8897-bt"; + reg = <2>; + interrupt-parent = <&pio>; + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; + marvell,wakeup-pin = /bits/ 16 <0x0d>; + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; + }; + + mwifiex: mwifiex@1 { + compatible = "marvell,sd8897"; + reg = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + marvell,wakeup-pin = <3>; + marvell,caldata_ed_mac = /bits/ 8 < +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 + >; + }; +}; + +&nor_flash { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nor_gpio1_pins>; + bus-width = <8>; + max-frequency = <50000000>; + non-removable; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + }; +}; + +&pio { + aud_i2s2: aud_i2s2 { + pins1 { + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; + bias-pull-down; + }; + }; + + bl_fixed_pins: bl_fixed_pins { + pins1 { + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; + output-low; + }; + }; + + bt_wake_pins: bt_wake_pins { + pins1 { + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; + bias-pull-up; + }; + }; + + disp_pwm0_pins: disp_pwm0_pins { + pins1 { + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; + output-low; + }; + }; + + gpio_keys_pins: gpio_keys_pins { + volume_pins { + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; + bias-pull-up; + }; + + tablet_mode_pins { + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; + bias-pull-up; + }; + }; + + hdmi_mux_pins: hdmi_mux_pins { + pins1 { + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; + }; + }; + + mmc0_pins_default: mmc0default { + pins_cmd_dat { + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; + bias-pull-up; + }; + + pins_clk { + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; + bias-pull-down; + }; + + pins_rst { + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; + bias-pull-up; + }; + }; + + mmc1_pins_default: mmc1default { + pins_cmd_dat { + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_clk { + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; + bias-pull-down; + drive-strength = <MTK_DRIVE_4mA>; + }; + + pins_insert { + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; + bias-pull-up; + }; + }; + + mmc3_pins_default: mmc3default { + pins_dat { + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_cmd { + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_clk { + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; + bias-pull-down; + drive-strength = <MTK_DRIVE_8mA>; + }; + + pins_pdn { + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; + output-low; + }; + }; + + mmc0_pins_uhs: mmc0 { + pins_cmd_dat { + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins_clk { + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; + }; + + pins_ds { + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; + drive-strength = <MTK_DRIVE_10mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; + }; + + pins_rst { + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; + bias-pull-up; + }; + }; + + mmc1_pins_uhs: mmc1 { + pins_cmd_dat { + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_clk { + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + }; + + mmc3_pins_uhs: mmc3 { + pins_dat { + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_cmd { + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_clk { + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + }; + + nor_gpio1_pins: nor { + pins1 { + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, + <MT8173_PIN_8_EINT8__FUNC_SFIN>; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up; + }; + + pins2 { + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up; + }; + + pins_clk { + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up; + }; + }; + + panel_fixed_pins: panel_fixed_pins { + pins1 { + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; + }; + }; + + ps8640_pins: ps8640_pins { + pins1 { + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; + }; + }; + + ps8640_fixed_pins: ps8640_fixed_pins { + pins1 { + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; + }; + }; + + rt5650_irq: rt5650_irq { + pins1 { + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; + bias-pull-down; + }; + }; + + spi_pins_a: spi1 { + pins1 { + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; + bias-pull-up; + }; + + pins_spi { + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; + bias-disable; + }; + }; + + trackpad_irq: trackpad_irq { + pins1 { + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; + input-enable; + bias-pull-up; + }; + }; + + usb_pins: usb@0 { + pins1 { + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; + output-high; + bias-disable; + }; + }; + + wifi_wake_pins: wifi_wake_pins { + pins1 { + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; + bias-pull-up; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwrap { + pmic: mt6397 { + compatible = "mediatek,mt6397"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + mt6397rtc: mt6397rtc { + compatible = "mediatek,mt6397-rtc"; + }; + + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { + compatible = "mediatek,mt6397-pctl-pmic-syscfg", + "syscon"; + reg = <0 0x0000c000 0 0x0108>; + }; + + pio6397: pinctrl@c000 { + compatible = "mediatek,mt6397-pinctrl"; + pins-are-numbered; + gpio-controller; + #gpio-cells = <2>; + }; + + mt6397clock: mt6397clock { + compatible = "mediatek,mt6397-clk"; + #clock-cells = <1>; + }; + + mt6397regulator: mt6397regulator { + compatible = "mediatek,mt6397-regulator"; + + mt6397_vpca15_reg: buck_vpca15 { + regulator-compatible = "buck_vpca15"; + regulator-name = "vpca15"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + regulator-allowed-modes = <0 1>; + }; + + mt6397_vpca7_reg: buck_vpca7 { + regulator-compatible = "buck_vpca7"; + regulator-name = "vpca7"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + regulator-always-on; + }; + + mt6397_vsramca15_reg: buck_vsramca15 { + regulator-compatible = "buck_vsramca15"; + regulator-name = "vsramca15"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vsramca7_reg: buck_vsramca7 { + regulator-compatible = "buck_vsramca7"; + regulator-name = "vsramca7"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vcore_reg: buck_vcore { + regulator-compatible = "buck_vcore"; + regulator-name = "vcore"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vgpu_reg: buck_vgpu { + regulator-compatible = "buck_vgpu"; + regulator-name = "vgpu"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + }; + + mt6397_vdrm_reg: buck_vdrm { + regulator-compatible = "buck_vdrm"; + regulator-name = "vdrm"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vio18_reg: buck_vio18 { + regulator-compatible = "buck_vio18"; + regulator-name = "vio18"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vtcxo_reg: ldo_vtcxo { + regulator-compatible = "ldo_vtcxo"; + regulator-name = "vtcxo"; + regulator-always-on; + }; + + mt6397_va28_reg: ldo_va28 { + regulator-compatible = "ldo_va28"; + regulator-name = "va28"; + }; + + mt6397_vcama_reg: ldo_vcama { + regulator-compatible = "ldo_vcama"; + regulator-name = "vcama"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vio28_reg: ldo_vio28 { + regulator-compatible = "ldo_vio28"; + regulator-name = "vio28"; + regulator-always-on; + }; + + mt6397_vusb_reg: ldo_vusb { + regulator-compatible = "ldo_vusb"; + regulator-name = "vusb"; + }; + + mt6397_vmc_reg: ldo_vmc { + regulator-compatible = "ldo_vmc"; + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vmch_reg: ldo_vmch { + regulator-compatible = "ldo_vmch"; + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vemc_3v3_reg: ldo_vemc3v3 { + regulator-compatible = "ldo_vemc3v3"; + regulator-name = "vemc_3v3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp1_reg: ldo_vgp1 { + regulator-compatible = "ldo_vgp1"; + regulator-name = "vcamd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <240>; + }; + + mt6397_vgp2_reg: ldo_vgp2 { + regulator-compatible = "ldo_vgp2"; + regulator-name = "vcamio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp3_reg: ldo_vgp3 { + regulator-compatible = "ldo_vgp3"; + regulator-name = "vcamaf"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp4_reg: ldo_vgp4 { + regulator-compatible = "ldo_vgp4"; + regulator-name = "vgp4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp5_reg: ldo_vgp5 { + regulator-compatible = "ldo_vgp5"; + regulator-name = "vgp5"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp6_reg: ldo_vgp6 { + regulator-compatible = "ldo_vgp6"; + regulator-name = "vgp6"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + regulator-always-on; + }; + + mt6397_vibr_reg: ldo_vibr { + regulator-compatible = "ldo_vibr"; + regulator-name = "vibr"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + }; + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_a>; + mediatek,pad-select = <1>; + status = "okay"; + /* clients */ + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0x0>; + spi-max-frequency = <12000000>; + interrupt-parent = <&pio>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + google,cros-ec-spi-msg-delay = <500>; + + i2c_tunnel: i2c-tunnel@0 { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <1>; + }; + }; + }; +}; + +&thermal { + bank0-supply = <&mt6397_vpca15_reg>; + bank1-supply = <&da9211_vcpu_reg>; +}; + +&uart0 { + status = "okay"; +}; + +&ssusb { + dr_mode = "host"; + wakeup-source; + vusb33-supply = <&mt6397_vusb_reg>; + status = "okay"; +}; + +&usb_host { + pinctrl-names = "default"; + pinctrl-0 = <&usb_pins>; + vusb33-supply = <&mt6397_vusb_reg>; + status = "okay"; +}; + +#include "../../../../arm/boot/dts/cros-ec-keyboard.dtsi" \ No newline at end of file -- 2.25.0.rc1.283.g88dfdc4193-goog _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply related [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board 2020-01-10 7:37 ` Hsin-Yi Wang (?) @ 2020-01-10 8:52 ` Yingjoe Chen -1 siblings, 0 replies; 42+ messages in thread From: Yingjoe Chen @ 2020-01-10 8:52 UTC (permalink / raw) To: Hsin-Yi Wang Cc: linux-arm-kernel, Mark Rutland, devicetree, Nicolas Boichat, linux-kernel, Enric Balletbo i Serra, Rob Herring, linux-mediatek, Matthias Brugger On Fri, 2020-01-10 at 15:37 +0800, Hsin-Yi Wang wrote: > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > SoC. > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > --- > Changes in v2: > - remove downstream nodes and unused nodes > - use GPIO_ACTIVE_LOW for ps8640 gpios > - move trackpad to hana > --- > arch/arm64/boot/dts/mediatek/Makefile | 3 + > .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > 6 files changed, 1161 insertions(+) > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > index 458bbc422a94..b45a45a565a1 100644 > --- a/arch/arm64/boot/dts/mediatek/Makefile > +++ b/arch/arm64/boot/dts/mediatek/Makefile > @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > new file mode 100644 > index 000000000000..a3616bc3d859 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > @@ -0,0 +1,27 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2019 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm-hana.dtsi" > + > +/ { > + model = "Mediatek Hana rev7 board"; > + compatible = "google,hana-rev7", "mediatek,mt8173"; > +}; > + > +&cpu_thermal { > + trips { > + cpu_crit: cpu_crit@0 { > + temperature = <100000>; > + type = "critical"; > + }; > + }; > +}; > + > +&gpio_keys { > + /delete-node/tablet_mode; > + /delete-node/volume_down; > + /delete-node/volume_up; > +}; > \ No newline at end of file nit: Please add a newline at end of file for all files in this patch. > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > new file mode 100644 > index 000000000000..8cbcc75192e3 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > @@ -0,0 +1,16 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm-hana.dtsi" > + > +/ { > + model = "Mediatek Hana rev0 board"; > + compatible = "google,hana-rev6", > + "google,hana-rev5", "google,hana-rev4", > + "google,hana-rev3", "google,hana-rev2", > + "google,hana-rev1", "google,hana-rev0", > + "google,hana", "mediatek,mt8173"; > +}; > \ No newline at end of file <...> > + > +&pwrap { > + pmic: mt6397 { > + compatible = "mediatek,mt6397"; > + #address-cells = <1>; > + #size-cells = <1>; > + interrupt-parent = <&pio>; > + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + mt6397rtc: mt6397rtc { > + compatible = "mediatek,mt6397-rtc"; > + }; > + > + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { > + compatible = "mediatek,mt6397-pctl-pmic-syscfg", > + "syscon"; > + reg = <0 0x0000c000 0 0x0108>; > + }; > + > + pio6397: pinctrl@c000 { > + compatible = "mediatek,mt6397-pinctrl"; > + pins-are-numbered; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + mt6397clock: mt6397clock { > + compatible = "mediatek,mt6397-clk"; > + #clock-cells = <1>; > + }; > + > + mt6397regulator: mt6397regulator { > + compatible = "mediatek,mt6397-regulator"; > + > + mt6397_vpca15_reg: buck_vpca15 { > + regulator-compatible = "buck_vpca15"; > + regulator-name = "vpca15"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + regulator-allowed-modes = <0 1>; > + }; > + > + mt6397_vpca7_reg: buck_vpca7 { > + regulator-compatible = "buck_vpca7"; > + regulator-name = "vpca7"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <115>; > + regulator-always-on; > + }; > + > + mt6397_vsramca15_reg: buck_vsramca15 { > + regulator-compatible = "buck_vsramca15"; > + regulator-name = "vsramca15"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vsramca7_reg: buck_vsramca7 { > + regulator-compatible = "buck_vsramca7"; > + regulator-name = "vsramca7"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vcore_reg: buck_vcore { > + regulator-compatible = "buck_vcore"; > + regulator-name = "vcore"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vgpu_reg: buck_vgpu { > + regulator-compatible = "buck_vgpu"; > + regulator-name = "vgpu"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <115>; > + }; > + > + mt6397_vdrm_reg: buck_vdrm { > + regulator-compatible = "buck_vdrm"; > + regulator-name = "vdrm"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1400000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vio18_reg: buck_vio18 { > + regulator-compatible = "buck_vio18"; > + regulator-name = "vio18"; > + regulator-min-microvolt = <1620000>; > + regulator-max-microvolt = <1980000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vtcxo_reg: ldo_vtcxo { > + regulator-compatible = "ldo_vtcxo"; > + regulator-name = "vtcxo"; > + regulator-always-on; > + }; > + > + mt6397_va28_reg: ldo_va28 { > + regulator-compatible = "ldo_va28"; > + regulator-name = "va28"; > + }; > + > + mt6397_vcama_reg: ldo_vcama { > + regulator-compatible = "ldo_vcama"; > + regulator-name = "vcama"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vio28_reg: ldo_vio28 { > + regulator-compatible = "ldo_vio28"; > + regulator-name = "vio28"; > + regulator-always-on; > + }; > + > + mt6397_vusb_reg: ldo_vusb { > + regulator-compatible = "ldo_vusb"; > + regulator-name = "vusb"; > + }; > + > + mt6397_vmc_reg: ldo_vmc { > + regulator-compatible = "ldo_vmc"; > + regulator-name = "vmc"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vmch_reg: ldo_vmch { > + regulator-compatible = "ldo_vmch"; > + regulator-name = "vmch"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vemc_3v3_reg: ldo_vemc3v3 { > + regulator-compatible = "ldo_vemc3v3"; > + regulator-name = "vemc_3v3"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp1_reg: ldo_vgp1 { > + regulator-compatible = "ldo_vgp1"; > + regulator-name = "vcamd"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <240>; > + }; > + > + mt6397_vgp2_reg: ldo_vgp2 { > + regulator-compatible = "ldo_vgp2"; > + regulator-name = "vcamio"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp3_reg: ldo_vgp3 { > + regulator-compatible = "ldo_vgp3"; > + regulator-name = "vcamaf"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp4_reg: ldo_vgp4 { > + regulator-compatible = "ldo_vgp4"; > + regulator-name = "vgp4"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp5_reg: ldo_vgp5 { > + regulator-compatible = "ldo_vgp5"; > + regulator-name = "vgp5"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3000000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp6_reg: ldo_vgp6 { > + regulator-compatible = "ldo_vgp6"; > + regulator-name = "vgp6"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + regulator-always-on; > + }; > + > + mt6397_vibr_reg: ldo_vibr { > + regulator-compatible = "ldo_vibr"; > + regulator-name = "vibr"; > + regulator-min-microvolt = <1300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + }; > + }; > +}; > + > +&spi { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi_pins_a>; > + mediatek,pad-select = <1>; > + status = "okay"; > + /* clients */ > + cros_ec: ec@0 { > + compatible = "google,cros-ec-spi"; > + reg = <0x0>; > + spi-max-frequency = <12000000>; > + interrupt-parent = <&pio>; > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > + google,cros-ec-spi-msg-delay = <500>; > + > + i2c_tunnel: i2c-tunnel@0 { > + compatible = "google,cros-ec-i2c-tunnel"; > + google,remote-bus = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + battery: sbs-battery@b { > + compatible = "sbs,sbs-battery"; > + reg = <0xb>; > + sbs,i2c-retry-count = <2>; > + sbs,poll-retry-count = <1>; > + }; > + }; > + }; > +}; > + > +&thermal { > + bank0-supply = <&mt6397_vpca15_reg>; > + bank1-supply = <&da9211_vcpu_reg>; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&ssusb { sorting according to name, please put this before thermal. Joe.C ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board @ 2020-01-10 8:52 ` Yingjoe Chen 0 siblings, 0 replies; 42+ messages in thread From: Yingjoe Chen @ 2020-01-10 8:52 UTC (permalink / raw) To: Hsin-Yi Wang Cc: Mark Rutland, devicetree, Nicolas Boichat, linux-kernel, Matthias Brugger, Rob Herring, linux-mediatek, Enric Balletbo i Serra, linux-arm-kernel On Fri, 2020-01-10 at 15:37 +0800, Hsin-Yi Wang wrote: > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > SoC. > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > --- > Changes in v2: > - remove downstream nodes and unused nodes > - use GPIO_ACTIVE_LOW for ps8640 gpios > - move trackpad to hana > --- > arch/arm64/boot/dts/mediatek/Makefile | 3 + > .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > 6 files changed, 1161 insertions(+) > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > index 458bbc422a94..b45a45a565a1 100644 > --- a/arch/arm64/boot/dts/mediatek/Makefile > +++ b/arch/arm64/boot/dts/mediatek/Makefile > @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > new file mode 100644 > index 000000000000..a3616bc3d859 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > @@ -0,0 +1,27 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2019 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm-hana.dtsi" > + > +/ { > + model = "Mediatek Hana rev7 board"; > + compatible = "google,hana-rev7", "mediatek,mt8173"; > +}; > + > +&cpu_thermal { > + trips { > + cpu_crit: cpu_crit@0 { > + temperature = <100000>; > + type = "critical"; > + }; > + }; > +}; > + > +&gpio_keys { > + /delete-node/tablet_mode; > + /delete-node/volume_down; > + /delete-node/volume_up; > +}; > \ No newline at end of file nit: Please add a newline at end of file for all files in this patch. > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > new file mode 100644 > index 000000000000..8cbcc75192e3 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > @@ -0,0 +1,16 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm-hana.dtsi" > + > +/ { > + model = "Mediatek Hana rev0 board"; > + compatible = "google,hana-rev6", > + "google,hana-rev5", "google,hana-rev4", > + "google,hana-rev3", "google,hana-rev2", > + "google,hana-rev1", "google,hana-rev0", > + "google,hana", "mediatek,mt8173"; > +}; > \ No newline at end of file <...> > + > +&pwrap { > + pmic: mt6397 { > + compatible = "mediatek,mt6397"; > + #address-cells = <1>; > + #size-cells = <1>; > + interrupt-parent = <&pio>; > + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + mt6397rtc: mt6397rtc { > + compatible = "mediatek,mt6397-rtc"; > + }; > + > + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { > + compatible = "mediatek,mt6397-pctl-pmic-syscfg", > + "syscon"; > + reg = <0 0x0000c000 0 0x0108>; > + }; > + > + pio6397: pinctrl@c000 { > + compatible = "mediatek,mt6397-pinctrl"; > + pins-are-numbered; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + mt6397clock: mt6397clock { > + compatible = "mediatek,mt6397-clk"; > + #clock-cells = <1>; > + }; > + > + mt6397regulator: mt6397regulator { > + compatible = "mediatek,mt6397-regulator"; > + > + mt6397_vpca15_reg: buck_vpca15 { > + regulator-compatible = "buck_vpca15"; > + regulator-name = "vpca15"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + regulator-allowed-modes = <0 1>; > + }; > + > + mt6397_vpca7_reg: buck_vpca7 { > + regulator-compatible = "buck_vpca7"; > + regulator-name = "vpca7"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <115>; > + regulator-always-on; > + }; > + > + mt6397_vsramca15_reg: buck_vsramca15 { > + regulator-compatible = "buck_vsramca15"; > + regulator-name = "vsramca15"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vsramca7_reg: buck_vsramca7 { > + regulator-compatible = "buck_vsramca7"; > + regulator-name = "vsramca7"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vcore_reg: buck_vcore { > + regulator-compatible = "buck_vcore"; > + regulator-name = "vcore"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vgpu_reg: buck_vgpu { > + regulator-compatible = "buck_vgpu"; > + regulator-name = "vgpu"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <115>; > + }; > + > + mt6397_vdrm_reg: buck_vdrm { > + regulator-compatible = "buck_vdrm"; > + regulator-name = "vdrm"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1400000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vio18_reg: buck_vio18 { > + regulator-compatible = "buck_vio18"; > + regulator-name = "vio18"; > + regulator-min-microvolt = <1620000>; > + regulator-max-microvolt = <1980000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vtcxo_reg: ldo_vtcxo { > + regulator-compatible = "ldo_vtcxo"; > + regulator-name = "vtcxo"; > + regulator-always-on; > + }; > + > + mt6397_va28_reg: ldo_va28 { > + regulator-compatible = "ldo_va28"; > + regulator-name = "va28"; > + }; > + > + mt6397_vcama_reg: ldo_vcama { > + regulator-compatible = "ldo_vcama"; > + regulator-name = "vcama"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vio28_reg: ldo_vio28 { > + regulator-compatible = "ldo_vio28"; > + regulator-name = "vio28"; > + regulator-always-on; > + }; > + > + mt6397_vusb_reg: ldo_vusb { > + regulator-compatible = "ldo_vusb"; > + regulator-name = "vusb"; > + }; > + > + mt6397_vmc_reg: ldo_vmc { > + regulator-compatible = "ldo_vmc"; > + regulator-name = "vmc"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vmch_reg: ldo_vmch { > + regulator-compatible = "ldo_vmch"; > + regulator-name = "vmch"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vemc_3v3_reg: ldo_vemc3v3 { > + regulator-compatible = "ldo_vemc3v3"; > + regulator-name = "vemc_3v3"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp1_reg: ldo_vgp1 { > + regulator-compatible = "ldo_vgp1"; > + regulator-name = "vcamd"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <240>; > + }; > + > + mt6397_vgp2_reg: ldo_vgp2 { > + regulator-compatible = "ldo_vgp2"; > + regulator-name = "vcamio"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp3_reg: ldo_vgp3 { > + regulator-compatible = "ldo_vgp3"; > + regulator-name = "vcamaf"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp4_reg: ldo_vgp4 { > + regulator-compatible = "ldo_vgp4"; > + regulator-name = "vgp4"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp5_reg: ldo_vgp5 { > + regulator-compatible = "ldo_vgp5"; > + regulator-name = "vgp5"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3000000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp6_reg: ldo_vgp6 { > + regulator-compatible = "ldo_vgp6"; > + regulator-name = "vgp6"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + regulator-always-on; > + }; > + > + mt6397_vibr_reg: ldo_vibr { > + regulator-compatible = "ldo_vibr"; > + regulator-name = "vibr"; > + regulator-min-microvolt = <1300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + }; > + }; > +}; > + > +&spi { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi_pins_a>; > + mediatek,pad-select = <1>; > + status = "okay"; > + /* clients */ > + cros_ec: ec@0 { > + compatible = "google,cros-ec-spi"; > + reg = <0x0>; > + spi-max-frequency = <12000000>; > + interrupt-parent = <&pio>; > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > + google,cros-ec-spi-msg-delay = <500>; > + > + i2c_tunnel: i2c-tunnel@0 { > + compatible = "google,cros-ec-i2c-tunnel"; > + google,remote-bus = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + battery: sbs-battery@b { > + compatible = "sbs,sbs-battery"; > + reg = <0xb>; > + sbs,i2c-retry-count = <2>; > + sbs,poll-retry-count = <1>; > + }; > + }; > + }; > +}; > + > +&thermal { > + bank0-supply = <&mt6397_vpca15_reg>; > + bank1-supply = <&da9211_vcpu_reg>; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&ssusb { sorting according to name, please put this before thermal. Joe.C _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board @ 2020-01-10 8:52 ` Yingjoe Chen 0 siblings, 0 replies; 42+ messages in thread From: Yingjoe Chen @ 2020-01-10 8:52 UTC (permalink / raw) To: Hsin-Yi Wang Cc: Mark Rutland, devicetree, Nicolas Boichat, linux-kernel, Matthias Brugger, Rob Herring, linux-mediatek, Enric Balletbo i Serra, linux-arm-kernel On Fri, 2020-01-10 at 15:37 +0800, Hsin-Yi Wang wrote: > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > SoC. > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > --- > Changes in v2: > - remove downstream nodes and unused nodes > - use GPIO_ACTIVE_LOW for ps8640 gpios > - move trackpad to hana > --- > arch/arm64/boot/dts/mediatek/Makefile | 3 + > .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > 6 files changed, 1161 insertions(+) > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > index 458bbc422a94..b45a45a565a1 100644 > --- a/arch/arm64/boot/dts/mediatek/Makefile > +++ b/arch/arm64/boot/dts/mediatek/Makefile > @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > new file mode 100644 > index 000000000000..a3616bc3d859 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > @@ -0,0 +1,27 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2019 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm-hana.dtsi" > + > +/ { > + model = "Mediatek Hana rev7 board"; > + compatible = "google,hana-rev7", "mediatek,mt8173"; > +}; > + > +&cpu_thermal { > + trips { > + cpu_crit: cpu_crit@0 { > + temperature = <100000>; > + type = "critical"; > + }; > + }; > +}; > + > +&gpio_keys { > + /delete-node/tablet_mode; > + /delete-node/volume_down; > + /delete-node/volume_up; > +}; > \ No newline at end of file nit: Please add a newline at end of file for all files in this patch. > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > new file mode 100644 > index 000000000000..8cbcc75192e3 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > @@ -0,0 +1,16 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm-hana.dtsi" > + > +/ { > + model = "Mediatek Hana rev0 board"; > + compatible = "google,hana-rev6", > + "google,hana-rev5", "google,hana-rev4", > + "google,hana-rev3", "google,hana-rev2", > + "google,hana-rev1", "google,hana-rev0", > + "google,hana", "mediatek,mt8173"; > +}; > \ No newline at end of file <...> > + > +&pwrap { > + pmic: mt6397 { > + compatible = "mediatek,mt6397"; > + #address-cells = <1>; > + #size-cells = <1>; > + interrupt-parent = <&pio>; > + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + mt6397rtc: mt6397rtc { > + compatible = "mediatek,mt6397-rtc"; > + }; > + > + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { > + compatible = "mediatek,mt6397-pctl-pmic-syscfg", > + "syscon"; > + reg = <0 0x0000c000 0 0x0108>; > + }; > + > + pio6397: pinctrl@c000 { > + compatible = "mediatek,mt6397-pinctrl"; > + pins-are-numbered; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + mt6397clock: mt6397clock { > + compatible = "mediatek,mt6397-clk"; > + #clock-cells = <1>; > + }; > + > + mt6397regulator: mt6397regulator { > + compatible = "mediatek,mt6397-regulator"; > + > + mt6397_vpca15_reg: buck_vpca15 { > + regulator-compatible = "buck_vpca15"; > + regulator-name = "vpca15"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + regulator-allowed-modes = <0 1>; > + }; > + > + mt6397_vpca7_reg: buck_vpca7 { > + regulator-compatible = "buck_vpca7"; > + regulator-name = "vpca7"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <115>; > + regulator-always-on; > + }; > + > + mt6397_vsramca15_reg: buck_vsramca15 { > + regulator-compatible = "buck_vsramca15"; > + regulator-name = "vsramca15"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vsramca7_reg: buck_vsramca7 { > + regulator-compatible = "buck_vsramca7"; > + regulator-name = "vsramca7"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vcore_reg: buck_vcore { > + regulator-compatible = "buck_vcore"; > + regulator-name = "vcore"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vgpu_reg: buck_vgpu { > + regulator-compatible = "buck_vgpu"; > + regulator-name = "vgpu"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <115>; > + }; > + > + mt6397_vdrm_reg: buck_vdrm { > + regulator-compatible = "buck_vdrm"; > + regulator-name = "vdrm"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1400000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vio18_reg: buck_vio18 { > + regulator-compatible = "buck_vio18"; > + regulator-name = "vio18"; > + regulator-min-microvolt = <1620000>; > + regulator-max-microvolt = <1980000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vtcxo_reg: ldo_vtcxo { > + regulator-compatible = "ldo_vtcxo"; > + regulator-name = "vtcxo"; > + regulator-always-on; > + }; > + > + mt6397_va28_reg: ldo_va28 { > + regulator-compatible = "ldo_va28"; > + regulator-name = "va28"; > + }; > + > + mt6397_vcama_reg: ldo_vcama { > + regulator-compatible = "ldo_vcama"; > + regulator-name = "vcama"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vio28_reg: ldo_vio28 { > + regulator-compatible = "ldo_vio28"; > + regulator-name = "vio28"; > + regulator-always-on; > + }; > + > + mt6397_vusb_reg: ldo_vusb { > + regulator-compatible = "ldo_vusb"; > + regulator-name = "vusb"; > + }; > + > + mt6397_vmc_reg: ldo_vmc { > + regulator-compatible = "ldo_vmc"; > + regulator-name = "vmc"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vmch_reg: ldo_vmch { > + regulator-compatible = "ldo_vmch"; > + regulator-name = "vmch"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vemc_3v3_reg: ldo_vemc3v3 { > + regulator-compatible = "ldo_vemc3v3"; > + regulator-name = "vemc_3v3"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp1_reg: ldo_vgp1 { > + regulator-compatible = "ldo_vgp1"; > + regulator-name = "vcamd"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <240>; > + }; > + > + mt6397_vgp2_reg: ldo_vgp2 { > + regulator-compatible = "ldo_vgp2"; > + regulator-name = "vcamio"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp3_reg: ldo_vgp3 { > + regulator-compatible = "ldo_vgp3"; > + regulator-name = "vcamaf"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp4_reg: ldo_vgp4 { > + regulator-compatible = "ldo_vgp4"; > + regulator-name = "vgp4"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp5_reg: ldo_vgp5 { > + regulator-compatible = "ldo_vgp5"; > + regulator-name = "vgp5"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3000000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp6_reg: ldo_vgp6 { > + regulator-compatible = "ldo_vgp6"; > + regulator-name = "vgp6"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + regulator-always-on; > + }; > + > + mt6397_vibr_reg: ldo_vibr { > + regulator-compatible = "ldo_vibr"; > + regulator-name = "vibr"; > + regulator-min-microvolt = <1300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + }; > + }; > +}; > + > +&spi { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi_pins_a>; > + mediatek,pad-select = <1>; > + status = "okay"; > + /* clients */ > + cros_ec: ec@0 { > + compatible = "google,cros-ec-spi"; > + reg = <0x0>; > + spi-max-frequency = <12000000>; > + interrupt-parent = <&pio>; > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > + google,cros-ec-spi-msg-delay = <500>; > + > + i2c_tunnel: i2c-tunnel@0 { > + compatible = "google,cros-ec-i2c-tunnel"; > + google,remote-bus = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + battery: sbs-battery@b { > + compatible = "sbs,sbs-battery"; > + reg = <0xb>; > + sbs,i2c-retry-count = <2>; > + sbs,poll-retry-count = <1>; > + }; > + }; > + }; > +}; > + > +&thermal { > + bank0-supply = <&mt6397_vpca15_reg>; > + bank1-supply = <&da9211_vcpu_reg>; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&ssusb { sorting according to name, please put this before thermal. Joe.C _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board 2020-01-10 7:37 ` Hsin-Yi Wang (?) @ 2020-01-10 13:42 ` Matthias Brugger -1 siblings, 0 replies; 42+ messages in thread From: Matthias Brugger @ 2020-01-10 13:42 UTC (permalink / raw) To: Hsin-Yi Wang, linux-arm-kernel Cc: Rob Herring, Mark Rutland, devicetree, linux-kernel, linux-mediatek, Nicolas Boichat, Enric Balletbo i Serra, Daniel Kurtz On 10/01/2020 08:37, Hsin-Yi Wang wrote: > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > SoC. > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > --- > Changes in v2: > - remove downstream nodes and unused nodes > - use GPIO_ACTIVE_LOW for ps8640 gpios > - move trackpad to hana > --- > arch/arm64/boot/dts/mediatek/Makefile | 3 + > .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > 6 files changed, 1161 insertions(+) > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > index 458bbc422a94..b45a45a565a1 100644 > --- a/arch/arm64/boot/dts/mediatek/Makefile > +++ b/arch/arm64/boot/dts/mediatek/Makefile > @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > new file mode 100644 > index 000000000000..a3616bc3d859 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > @@ -0,0 +1,27 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2019 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm-hana.dtsi" > + > +/ { > + model = "Mediatek Hana rev7 board"; > + compatible = "google,hana-rev7", "mediatek,mt8173"; > +}; > + > +&cpu_thermal { > + trips { > + cpu_crit: cpu_crit@0 { > + temperature = <100000>; > + type = "critical"; > + }; > + }; > +}; > + > +&gpio_keys { > + /delete-node/tablet_mode; > + /delete-node/volume_down; > + /delete-node/volume_up; > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > new file mode 100644 > index 000000000000..8cbcc75192e3 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > @@ -0,0 +1,16 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm-hana.dtsi" > + > +/ { > + model = "Mediatek Hana rev0 board"; > + compatible = "google,hana-rev6", > + "google,hana-rev5", "google,hana-rev4", > + "google,hana-rev3", "google,hana-rev2", > + "google,hana-rev1", "google,hana-rev0", > + "google,hana", "mediatek,mt8173"; > +}; I'm a bit confused about all this versions. Do you want to keep them for internal use, as I suppose only rev6 is available to the general public, correct? I'm fine with keeping the old revisions if that's of use for you, otherwise I'd prefer to delete them. Model name could be more verbose. > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > new file mode 100644 > index 000000000000..35e12b290947 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > @@ -0,0 +1,60 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +#include "mt8173-elm.dtsi" > + > +&i2c0 { > + clock-frequency = <200000>; > +}; > + > +&i2c3 { > + touchscreen2: touchscreen@34 { > + compatible = "melfas,mip4_ts"; > + reg = <0x34>; > + interrupt-parent = <&pio>; > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + touchscreen3: touchscreen@20 { > + compatible = "hid-over-i2c"; > + reg = <0x20>; > + hid-descr-addr = <0x0020>; > + interrupt-parent = <&pio>; > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > + }; In v1 you mentioned: "Partners wants to increase touchpad and touchscreen source (they choose synaptics) for hana 300e, and synaptics uses hid-over-i2c driver." So the partner uses the same compatible (google,hana-rev6?) for both devices? > +}; > + > +&i2c4 { > + trackpad2: trackpad@2c { > + compatible = "hid-over-i2c"; > + interrupt-parent = <&pio>; > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > + reg = <0x2c>; > + hid-descr-addr = <0x0020>; > + wakeup-source; > + }; > +}; > + > +&mmc1 { > + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; > +}; > + > +&pio { > + hdmi_mux_pins: hdmi_mux_pins { > + pins2 { > + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; > + bias-pull-up; > + output-high; > + }; > + }; > + > + mmc1_pins_default: mmc1default { > + pins_wp { > + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; > + input-enable; > + bias-pull-up; > + }; > + }; > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > new file mode 100644 > index 000000000000..e5da2355760e > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > @@ -0,0 +1,15 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm.dtsi" > + > +/ { > + model = "Mediatek Elm board"; > + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", > + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", > + "google,elm-rev2", "google,elm-rev1", > + "google,elm", "mediatek,mt8173"; > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > new file mode 100644 > index 000000000000..2ac738bebe04 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > @@ -0,0 +1,1040 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/gpio/gpio.h> > +#include "mt8173.dtsi" > + > +/ { > + aliases { > + serial0 = &uart0; > + serial1 = &uart1; > + serial2 = &uart2; > + serial3 = &uart3; > + }; > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0 0x40000000 0 0x80000000>; > + }; > + > + backlight_lcd: backlight_lcd { > + compatible = "pwm-backlight"; > + pwms = <&pwm0 0 1000000>; > + brightness-levels = < > + 0 16 32 48 64 80 96 112 > + 128 144 160 176 192 208 224 240 > + 255 > + >; > + default-brightness-level = <9>; > + power-supply = <&bl_fixed_reg>; > + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&disp_pwm0_pins>; > + status = "okay"; > + }; > + > + bl_fixed_reg: fixedregulator@2 { > + compatible = "regulator-fixed"; > + regulator-name = "bl_fixed"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + startup-delay-us = <1000>; > + enable-active-high; > + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&bl_fixed_pins>; > + }; > + > + chosen { > + stdout-path = &uart0; > + }; > + > + gpio_keys: gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&gpio_keys_pins>; > + > + lid { > + label = "Lid"; > + gpios = <&pio 69 GPIO_ACTIVE_LOW>; > + linux,code = <0>; /* SW_LID */ > + linux,input-type = <5>; /* EV_SW */ > + gpio-key,wakeup; > + }; > + > + power { > + label = "Power"; > + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; > + linux,code = <KEY_POWER>; > + debounce-interval = <30>; > + gpio-key,wakeup; > + }; > + > + tablet_mode { > + label = "Tablet_mode"; > + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; > + linux,code = <1>; /* SW_TABLET_MODE */ can't we use SW_TABLET_MODE fomr linux-event-codes.h? > + linux,input-type = <5>; /* EV_SW */ same here. > + gpio-key,wakeup; > + }; > + > + volume_down { > + label = "Volume_down"; > + gpios = <&pio 123 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEDOWN>; > + }; > + > + volume_up { > + label = "Volume_up"; > + gpios = <&pio 124 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEUP>; > + }; > + }; > + > + panel: panel { > + compatible = "lg,lp120up1"; > + power-supply = <&panel_fixed_3v3>; > + ddc-i2c-bus = <&i2c0>; > + backlight = <&backlight_lcd>; > + > + port { > + panel_in: endpoint { > + remote-endpoint = <&ps8640_out>; > + }; > + }; > + }; > + > + panel_fixed_3v3: regulator@1 { > + compatible = "regulator-fixed"; > + regulator-name = "PANEL_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + enable-active-high; > + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&panel_fixed_pins>; > + }; > + > + ps8640_fixed_1v2: regulator@2 { > + compatible = "regulator-fixed"; > + regulator-name = "PS8640_1V2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-enable-ramp-delay = <2000>; > + enable-active-high; > + regulator-boot-on; > + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&ps8640_fixed_pins>; > + }; > + > + sdio_fixed_3v3: fixedregulator@0 { > + compatible = "regulator-fixed"; > + regulator-name = "3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; we don't need to set the pincontroller mux here? > + }; > + > + sound: sound { > + compatible = "mediatek,mt8173-rt5650"; > + mediatek,audio-codec = <&rt5650 &hdmi0>; > + mediatek,platform = <&afe>; > + pinctrl-names = "default"; > + pinctrl-0 = <&aud_i2s2>; > + > + mediatek,mclk = <1>; > + codec-capture { > + sound-dai = <&rt5650 1>; > + }; > + }; > + > + hdmicon: connector { > + compatible = "hdmi-connector"; > + label = "hdmi"; > + type = "a"; > + ddc-i2c-bus = <&hdmiddc0>; > + > + port { > + hdmi_connector_in: endpoint { > + remote-endpoint = <&hdmi0_out>; > + }; > + }; > + }; > +}; > + > +&cec { > + status = "okay"; > +}; > + > +&cpu0 { > + proc-supply = <&mt6397_vpca15_reg>; > +}; > + > +&cpu1 { > + proc-supply = <&mt6397_vpca15_reg>; > +}; > + > +&cpu2 { > + proc-supply = <&da9211_vcpu_reg>; > + sram-supply = <&mt6397_vsramca7_reg>; > +}; > + > +&cpu3 { > + proc-supply = <&da9211_vcpu_reg>; > + sram-supply = <&mt6397_vsramca7_reg>; > +}; > + > +&cpu_thermal { > + sustainable-power = <4500>; /* milliwatts */ > + trips { > + threshold: trip-point@0 { > + temperature = <60000>; > + }; > + > + target: trip-point@1 { > + temperature = <65000>; > + }; > + }; > +}; > + > +&dsi0 { > + status = "okay"; > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + dsi0_out: endpoint { > + remote-endpoint = <&ps8640_in>; > + }; > + }; > + }; > +}; > + > +&dpi0 { > + status = "okay"; > +}; > + > +&hdmi0 { > + status = "okay"; > + ports { > + port@1 { > + reg = <1>; > + > + hdmi0_out: endpoint { > + remote-endpoint = <&hdmi_connector_in>; > + }; > + }; > + }; > +}; > + > +&hdmi_phy { > + status = "okay"; > + mediatek,ibias = <0xc>; > +}; > + > +&i2c0 { > + status = "okay"; > + > + rt5650: audio-codec@1a { > + compatible = "realtek,rt5650"; > + reg = <0x1a>; > + avdd-supply = <&mt6397_vgp1_reg>; > + cpvdd-supply = <&mt6397_vcama_reg>; Hm, only defined for "realtek,rt5663", I suppose that's an inconsistency in the binding documentation. Can you please double check? > + interrupt-parent = <&pio>; > + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&rt5650_irq>; > + #sound-dai-cells = <1>; > + realtek,dmic1-data-pin = <2>; > + realtek,jd-mode = <2>; > + }; > + > + ps8640: edp-bridge@8 { > + compatible = "parade,ps8640"; > + reg = <0x8>; > + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; > + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&ps8640_pins>; > + vdd12-supply = <&ps8640_fixed_1v2>; > + vdd33-supply = <&mt6397_vgp2_reg>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + ps8640_in: endpoint { > + remote-endpoint = <&dsi0_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + ps8640_out: endpoint { > + remote-endpoint = <&panel_in>; > + }; > + }; > + }; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <1500000>; > + status = "okay"; > + > + da9211: da9211@68 { > + compatible = "dlg,da9211"; > + reg = <0x68>; > + no interrupts? binding description have this stated as required. what happens when the device raises an interrupt? > + regulators { > + da9211_vcpu_reg: BUCKA { > + regulator-name = "VBUCKA"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1310000>; > + regulator-min-microamp = <2000000>; > + regulator-max-microamp = <4400000>; > + regulator-ramp-delay = <10000>; > + regulator-always-on; > + regulator-allowed-modes = <0 1>; > + }; > + > + da9211_vgpu_reg: BUCKB { > + regulator-name = "VBUCKB"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1310000>; > + regulator-min-microamp = <2000000>; > + regulator-max-microamp = <3000000>; > + regulator-ramp-delay = <10000>; > + }; > + }; > + }; > +}; > + > +&i2c2 { > + status = "okay"; > + > + tpm: tpm@20 { > + compatible = "infineon,slb9645tt"; > + reg = <0x20>; > + powered-while-suspended; > + }; > +}; > + > +&i2c3 { > + clock-frequency = <400000>; > + status = "okay"; > + > + touchscreen: touchscreen@10 { > + compatible = "elan,ekth3500"; > + reg = <0x10>; > + interrupt-parent = <&pio>; > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > + }; > +}; > + > +&i2c4 { > + clock-frequency = <400000>; > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&trackpad_irq>; Why not move the pinctrl properties into the trackpad node? > + > + trackpad: trackpad@15 { > + compatible = "elan,ekth3000"; > + interrupt-parent = <&pio>; > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > + reg = <0x15>; > + vcc-supply = <&mt6397_vgp6_reg>; > + wakeup-source; > + }; > +}; > + > +&mipi_tx0 { > + status = "okay"; > +}; > + > +&mmc0 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc0_pins_default>; > + pinctrl-1 = <&mmc0_pins_uhs>; > + bus-width = <8>; > + max-frequency = <200000000>; > + cap-mmc-highspeed; > + mmc-hs200-1_8v; > + mmc-hs400-1_8v; > + cap-mmc-hw-reset; > + hs400-ds-delay = <0x14015>; > + mediatek,hs200-cmd-int-delay=<30>; > + mediatek,hs400-cmd-int-delay=<14>; > + mediatek,hs400-cmd-resp-sel-rising; > + vmmc-supply = <&mt6397_vemc_3v3_reg>; > + vqmmc-supply = <&mt6397_vio18_reg>; > + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; > + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; > + non-removable; > +}; > + > +&mmc1 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc1_pins_default>; > + pinctrl-1 = <&mmc1_pins_uhs>; > + bus-width = <4>; > + max-frequency = <200000000>; > + cap-sd-highspeed; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; > + vmmc-supply = <&mt6397_vmch_reg>; > + vqmmc-supply = <&mt6397_vmc_reg>; > +}; > + > +&mmc3 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc3_pins_default>; > + pinctrl-1 = <&mmc3_pins_uhs>; > + bus-width = <4>; > + max-frequency = <200000000>; > + cap-sd-highspeed; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + sdr104-clk-delay = <5>; Not an upstream property, please delete it. > + keep-power-in-suspend; > + enable-sdio-wakeup; > + cap-sdio-irq; > + vmmc-supply = <&sdio_fixed_3v3>; > + vqmmc-supply = <&mt6397_vgp3_reg>; > + non-removable; > + cap-power-off-card; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + btmrvl: btmrvl@2 { > + compatible = "marvell,sd8897-bt"; > + reg = <2>; > + interrupt-parent = <&pio>; > + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; > + marvell,wakeup-pin = /bits/ 16 <0x0d>; > + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; > + }; > + > + mwifiex: mwifiex@1 { > + compatible = "marvell,sd8897"; > + reg = <1>; > + interrupt-parent = <&pio>; > + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; > + marvell,wakeup-pin = <3>; > + marvell,caldata_ed_mac = /bits/ 8 < > +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > + >; Not an upstream property, please delete. > + }; > +}; > + > +&nor_flash { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&nor_gpio1_pins>; > + bus-width = <8>; > + max-frequency = <50000000>; > + non-removable; > + flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + }; > +}; > + > +&pio { > + aud_i2s2: aud_i2s2 { > + pins1 { > + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, > + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, > + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, > + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, > + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, > + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, > + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; > + bias-pull-down; > + }; > + }; > + > + bl_fixed_pins: bl_fixed_pins { > + pins1 { > + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; > + output-low; > + }; > + }; > + > + bt_wake_pins: bt_wake_pins { > + pins1 { > + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; > + bias-pull-up; > + }; > + }; > + > + disp_pwm0_pins: disp_pwm0_pins { > + pins1 { > + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; > + output-low; > + }; > + }; > + > + gpio_keys_pins: gpio_keys_pins { > + volume_pins { > + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, > + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; > + bias-pull-up; > + }; > + > + tablet_mode_pins { > + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; > + bias-pull-up; > + }; > + }; > + > + hdmi_mux_pins: hdmi_mux_pins { > + pins1 { > + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; > + }; > + }; > + > + mmc0_pins_default: mmc0default { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > + bias-pull-up; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > + bias-pull-down; identation. > + }; > + > + pins_rst { > + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > + bias-pull-up; > + }; > + }; > + > + mmc1_pins_default: mmc1default { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > + bias-pull-down; > + drive-strength = <MTK_DRIVE_4mA>; > + }; > + > + pins_insert { > + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; > + bias-pull-up; > + }; > + }; > + > + mmc3_pins_default: mmc3default { > + pins_dat { > + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_cmd { > + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > + bias-pull-down; > + drive-strength = <MTK_DRIVE_8mA>; > + }; > + > + pins_pdn { > + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; > + output-low; > + }; > + }; > + > + mmc0_pins_uhs: mmc0 { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_ds { > + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; > + drive-strength = <MTK_DRIVE_10mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_rst { > + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > + bias-pull-up; > + }; > + }; > + > + mmc1_pins_uhs: mmc1 { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + }; > + > + mmc3_pins_uhs: mmc3 { > + pins_dat { > + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_cmd { > + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + }; > + > + nor_gpio1_pins: nor { > + pins1 { > + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, > + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, > + <MT8173_PIN_8_EINT8__FUNC_SFIN>; > + input-enable; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up; > + }; > + > + pins2 { > + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; > + input-enable; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up; > + }; > + }; > + > + panel_fixed_pins: panel_fixed_pins { > + pins1 { > + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; > + }; > + }; > + > + ps8640_pins: ps8640_pins { > + pins1 { > + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, > + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, > + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; > + }; > + }; > + > + ps8640_fixed_pins: ps8640_fixed_pins { > + pins1 { > + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; > + }; > + }; > + > + rt5650_irq: rt5650_irq { > + pins1 { > + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; > + bias-pull-down; > + }; > + }; > + > + spi_pins_a: spi1 { > + pins1 { > + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; > + bias-pull-up; > + }; > + > + pins_spi { > + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, > + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, > + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, > + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; > + bias-disable; > + }; > + }; > + > + trackpad_irq: trackpad_irq { > + pins1 { > + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; > + input-enable; > + bias-pull-up; > + }; > + }; > + > + usb_pins: usb@0 { > + pins1 { > + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; > + output-high; > + bias-disable; > + }; > + }; > + > + wifi_wake_pins: wifi_wake_pins { > + pins1 { > + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; > + bias-pull-up; > + }; > + }; > +}; > + > +&pwm0 { > + status = "okay"; > +}; > + > +&pwrap { > + pmic: mt6397 { > + compatible = "mediatek,mt6397"; > + #address-cells = <1>; > + #size-cells = <1>; > + interrupt-parent = <&pio>; > + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + mt6397rtc: mt6397rtc { AFAIK this should be rtc: mt6397rtc { Please fix that for all subnodes. > + compatible = "mediatek,mt6397-rtc"; > + }; > + > + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { > + compatible = "mediatek,mt6397-pctl-pmic-syscfg", > + "syscon"; > + reg = <0 0x0000c000 0 0x0108>; not an upstream compatible, please delete the node. > + }; > + > + pio6397: pinctrl@c000 { > + compatible = "mediatek,mt6397-pinctrl"; > + pins-are-numbered; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + mt6397clock: mt6397clock { > + compatible = "mediatek,mt6397-clk"; > + #clock-cells = <1>; > + }; > + > + mt6397regulator: mt6397regulator { > + compatible = "mediatek,mt6397-regulator"; > + > + mt6397_vpca15_reg: buck_vpca15 { > + regulator-compatible = "buck_vpca15"; > + regulator-name = "vpca15"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + regulator-allowed-modes = <0 1>; > + }; > + > + mt6397_vpca7_reg: buck_vpca7 { > + regulator-compatible = "buck_vpca7"; > + regulator-name = "vpca7"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <115>; > + regulator-always-on; > + }; > + > + mt6397_vsramca15_reg: buck_vsramca15 { > + regulator-compatible = "buck_vsramca15"; > + regulator-name = "vsramca15"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vsramca7_reg: buck_vsramca7 { > + regulator-compatible = "buck_vsramca7"; > + regulator-name = "vsramca7"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vcore_reg: buck_vcore { > + regulator-compatible = "buck_vcore"; > + regulator-name = "vcore"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vgpu_reg: buck_vgpu { > + regulator-compatible = "buck_vgpu"; > + regulator-name = "vgpu"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <115>; > + }; > + > + mt6397_vdrm_reg: buck_vdrm { > + regulator-compatible = "buck_vdrm"; > + regulator-name = "vdrm"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1400000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vio18_reg: buck_vio18 { > + regulator-compatible = "buck_vio18"; > + regulator-name = "vio18"; > + regulator-min-microvolt = <1620000>; > + regulator-max-microvolt = <1980000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vtcxo_reg: ldo_vtcxo { > + regulator-compatible = "ldo_vtcxo"; > + regulator-name = "vtcxo"; > + regulator-always-on; > + }; > + > + mt6397_va28_reg: ldo_va28 { > + regulator-compatible = "ldo_va28"; > + regulator-name = "va28"; > + }; > + > + mt6397_vcama_reg: ldo_vcama { > + regulator-compatible = "ldo_vcama"; > + regulator-name = "vcama"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vio28_reg: ldo_vio28 { > + regulator-compatible = "ldo_vio28"; > + regulator-name = "vio28"; > + regulator-always-on; > + }; > + > + mt6397_vusb_reg: ldo_vusb { > + regulator-compatible = "ldo_vusb"; > + regulator-name = "vusb"; > + }; > + > + mt6397_vmc_reg: ldo_vmc { > + regulator-compatible = "ldo_vmc"; > + regulator-name = "vmc"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vmch_reg: ldo_vmch { > + regulator-compatible = "ldo_vmch"; > + regulator-name = "vmch"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vemc_3v3_reg: ldo_vemc3v3 { > + regulator-compatible = "ldo_vemc3v3"; > + regulator-name = "vemc_3v3"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp1_reg: ldo_vgp1 { > + regulator-compatible = "ldo_vgp1"; > + regulator-name = "vcamd"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <240>; > + }; > + > + mt6397_vgp2_reg: ldo_vgp2 { > + regulator-compatible = "ldo_vgp2"; > + regulator-name = "vcamio"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp3_reg: ldo_vgp3 { > + regulator-compatible = "ldo_vgp3"; > + regulator-name = "vcamaf"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp4_reg: ldo_vgp4 { > + regulator-compatible = "ldo_vgp4"; > + regulator-name = "vgp4"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp5_reg: ldo_vgp5 { > + regulator-compatible = "ldo_vgp5"; > + regulator-name = "vgp5"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3000000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp6_reg: ldo_vgp6 { > + regulator-compatible = "ldo_vgp6"; > + regulator-name = "vgp6"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + regulator-always-on; > + }; > + > + mt6397_vibr_reg: ldo_vibr { > + regulator-compatible = "ldo_vibr"; > + regulator-name = "vibr"; > + regulator-min-microvolt = <1300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + }; > + }; > +}; > + > +&spi { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi_pins_a>; > + mediatek,pad-select = <1>; > + status = "okay"; > + /* clients */ > + cros_ec: ec@0 { > + compatible = "google,cros-ec-spi"; > + reg = <0x0>; > + spi-max-frequency = <12000000>; > + interrupt-parent = <&pio>; > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > + google,cros-ec-spi-msg-delay = <500>; > + > + i2c_tunnel: i2c-tunnel@0 { > + compatible = "google,cros-ec-i2c-tunnel"; > + google,remote-bus = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + battery: sbs-battery@b { > + compatible = "sbs,sbs-battery"; > + reg = <0xb>; > + sbs,i2c-retry-count = <2>; > + sbs,poll-retry-count = <1>; > + }; > + }; > + }; > +}; > + > +&thermal { > + bank0-supply = <&mt6397_vpca15_reg>; > + bank1-supply = <&da9211_vcpu_reg>; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&ssusb { > + dr_mode = "host"; > + wakeup-source; > + vusb33-supply = <&mt6397_vusb_reg>; > + status = "okay"; > +}; > + > +&usb_host { > + pinctrl-names = "default"; > + pinctrl-0 = <&usb_pins>; > + vusb33-supply = <&mt6397_vusb_reg>; > + status = "okay"; > +}; > + > +#include "../../../../arm/boot/dts/cros-ec-keyboard.dtsi" Why don't we use #include <arm/cros-ec-keyboard.dtsi> ? > \ No newline at end of file > As Yingjoe already mentioned, please add a newline :) Regards, Matthias ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board @ 2020-01-10 13:42 ` Matthias Brugger 0 siblings, 0 replies; 42+ messages in thread From: Matthias Brugger @ 2020-01-10 13:42 UTC (permalink / raw) To: Hsin-Yi Wang, linux-arm-kernel Cc: Mark Rutland, devicetree, Nicolas Boichat, linux-kernel, Daniel Kurtz, Rob Herring, linux-mediatek, Enric Balletbo i Serra On 10/01/2020 08:37, Hsin-Yi Wang wrote: > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > SoC. > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > --- > Changes in v2: > - remove downstream nodes and unused nodes > - use GPIO_ACTIVE_LOW for ps8640 gpios > - move trackpad to hana > --- > arch/arm64/boot/dts/mediatek/Makefile | 3 + > .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > 6 files changed, 1161 insertions(+) > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > index 458bbc422a94..b45a45a565a1 100644 > --- a/arch/arm64/boot/dts/mediatek/Makefile > +++ b/arch/arm64/boot/dts/mediatek/Makefile > @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > new file mode 100644 > index 000000000000..a3616bc3d859 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > @@ -0,0 +1,27 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2019 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm-hana.dtsi" > + > +/ { > + model = "Mediatek Hana rev7 board"; > + compatible = "google,hana-rev7", "mediatek,mt8173"; > +}; > + > +&cpu_thermal { > + trips { > + cpu_crit: cpu_crit@0 { > + temperature = <100000>; > + type = "critical"; > + }; > + }; > +}; > + > +&gpio_keys { > + /delete-node/tablet_mode; > + /delete-node/volume_down; > + /delete-node/volume_up; > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > new file mode 100644 > index 000000000000..8cbcc75192e3 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > @@ -0,0 +1,16 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm-hana.dtsi" > + > +/ { > + model = "Mediatek Hana rev0 board"; > + compatible = "google,hana-rev6", > + "google,hana-rev5", "google,hana-rev4", > + "google,hana-rev3", "google,hana-rev2", > + "google,hana-rev1", "google,hana-rev0", > + "google,hana", "mediatek,mt8173"; > +}; I'm a bit confused about all this versions. Do you want to keep them for internal use, as I suppose only rev6 is available to the general public, correct? I'm fine with keeping the old revisions if that's of use for you, otherwise I'd prefer to delete them. Model name could be more verbose. > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > new file mode 100644 > index 000000000000..35e12b290947 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > @@ -0,0 +1,60 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +#include "mt8173-elm.dtsi" > + > +&i2c0 { > + clock-frequency = <200000>; > +}; > + > +&i2c3 { > + touchscreen2: touchscreen@34 { > + compatible = "melfas,mip4_ts"; > + reg = <0x34>; > + interrupt-parent = <&pio>; > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + touchscreen3: touchscreen@20 { > + compatible = "hid-over-i2c"; > + reg = <0x20>; > + hid-descr-addr = <0x0020>; > + interrupt-parent = <&pio>; > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > + }; In v1 you mentioned: "Partners wants to increase touchpad and touchscreen source (they choose synaptics) for hana 300e, and synaptics uses hid-over-i2c driver." So the partner uses the same compatible (google,hana-rev6?) for both devices? > +}; > + > +&i2c4 { > + trackpad2: trackpad@2c { > + compatible = "hid-over-i2c"; > + interrupt-parent = <&pio>; > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > + reg = <0x2c>; > + hid-descr-addr = <0x0020>; > + wakeup-source; > + }; > +}; > + > +&mmc1 { > + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; > +}; > + > +&pio { > + hdmi_mux_pins: hdmi_mux_pins { > + pins2 { > + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; > + bias-pull-up; > + output-high; > + }; > + }; > + > + mmc1_pins_default: mmc1default { > + pins_wp { > + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; > + input-enable; > + bias-pull-up; > + }; > + }; > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > new file mode 100644 > index 000000000000..e5da2355760e > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > @@ -0,0 +1,15 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm.dtsi" > + > +/ { > + model = "Mediatek Elm board"; > + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", > + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", > + "google,elm-rev2", "google,elm-rev1", > + "google,elm", "mediatek,mt8173"; > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > new file mode 100644 > index 000000000000..2ac738bebe04 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > @@ -0,0 +1,1040 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/gpio/gpio.h> > +#include "mt8173.dtsi" > + > +/ { > + aliases { > + serial0 = &uart0; > + serial1 = &uart1; > + serial2 = &uart2; > + serial3 = &uart3; > + }; > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0 0x40000000 0 0x80000000>; > + }; > + > + backlight_lcd: backlight_lcd { > + compatible = "pwm-backlight"; > + pwms = <&pwm0 0 1000000>; > + brightness-levels = < > + 0 16 32 48 64 80 96 112 > + 128 144 160 176 192 208 224 240 > + 255 > + >; > + default-brightness-level = <9>; > + power-supply = <&bl_fixed_reg>; > + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&disp_pwm0_pins>; > + status = "okay"; > + }; > + > + bl_fixed_reg: fixedregulator@2 { > + compatible = "regulator-fixed"; > + regulator-name = "bl_fixed"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + startup-delay-us = <1000>; > + enable-active-high; > + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&bl_fixed_pins>; > + }; > + > + chosen { > + stdout-path = &uart0; > + }; > + > + gpio_keys: gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&gpio_keys_pins>; > + > + lid { > + label = "Lid"; > + gpios = <&pio 69 GPIO_ACTIVE_LOW>; > + linux,code = <0>; /* SW_LID */ > + linux,input-type = <5>; /* EV_SW */ > + gpio-key,wakeup; > + }; > + > + power { > + label = "Power"; > + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; > + linux,code = <KEY_POWER>; > + debounce-interval = <30>; > + gpio-key,wakeup; > + }; > + > + tablet_mode { > + label = "Tablet_mode"; > + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; > + linux,code = <1>; /* SW_TABLET_MODE */ can't we use SW_TABLET_MODE fomr linux-event-codes.h? > + linux,input-type = <5>; /* EV_SW */ same here. > + gpio-key,wakeup; > + }; > + > + volume_down { > + label = "Volume_down"; > + gpios = <&pio 123 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEDOWN>; > + }; > + > + volume_up { > + label = "Volume_up"; > + gpios = <&pio 124 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEUP>; > + }; > + }; > + > + panel: panel { > + compatible = "lg,lp120up1"; > + power-supply = <&panel_fixed_3v3>; > + ddc-i2c-bus = <&i2c0>; > + backlight = <&backlight_lcd>; > + > + port { > + panel_in: endpoint { > + remote-endpoint = <&ps8640_out>; > + }; > + }; > + }; > + > + panel_fixed_3v3: regulator@1 { > + compatible = "regulator-fixed"; > + regulator-name = "PANEL_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + enable-active-high; > + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&panel_fixed_pins>; > + }; > + > + ps8640_fixed_1v2: regulator@2 { > + compatible = "regulator-fixed"; > + regulator-name = "PS8640_1V2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-enable-ramp-delay = <2000>; > + enable-active-high; > + regulator-boot-on; > + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&ps8640_fixed_pins>; > + }; > + > + sdio_fixed_3v3: fixedregulator@0 { > + compatible = "regulator-fixed"; > + regulator-name = "3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; we don't need to set the pincontroller mux here? > + }; > + > + sound: sound { > + compatible = "mediatek,mt8173-rt5650"; > + mediatek,audio-codec = <&rt5650 &hdmi0>; > + mediatek,platform = <&afe>; > + pinctrl-names = "default"; > + pinctrl-0 = <&aud_i2s2>; > + > + mediatek,mclk = <1>; > + codec-capture { > + sound-dai = <&rt5650 1>; > + }; > + }; > + > + hdmicon: connector { > + compatible = "hdmi-connector"; > + label = "hdmi"; > + type = "a"; > + ddc-i2c-bus = <&hdmiddc0>; > + > + port { > + hdmi_connector_in: endpoint { > + remote-endpoint = <&hdmi0_out>; > + }; > + }; > + }; > +}; > + > +&cec { > + status = "okay"; > +}; > + > +&cpu0 { > + proc-supply = <&mt6397_vpca15_reg>; > +}; > + > +&cpu1 { > + proc-supply = <&mt6397_vpca15_reg>; > +}; > + > +&cpu2 { > + proc-supply = <&da9211_vcpu_reg>; > + sram-supply = <&mt6397_vsramca7_reg>; > +}; > + > +&cpu3 { > + proc-supply = <&da9211_vcpu_reg>; > + sram-supply = <&mt6397_vsramca7_reg>; > +}; > + > +&cpu_thermal { > + sustainable-power = <4500>; /* milliwatts */ > + trips { > + threshold: trip-point@0 { > + temperature = <60000>; > + }; > + > + target: trip-point@1 { > + temperature = <65000>; > + }; > + }; > +}; > + > +&dsi0 { > + status = "okay"; > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + dsi0_out: endpoint { > + remote-endpoint = <&ps8640_in>; > + }; > + }; > + }; > +}; > + > +&dpi0 { > + status = "okay"; > +}; > + > +&hdmi0 { > + status = "okay"; > + ports { > + port@1 { > + reg = <1>; > + > + hdmi0_out: endpoint { > + remote-endpoint = <&hdmi_connector_in>; > + }; > + }; > + }; > +}; > + > +&hdmi_phy { > + status = "okay"; > + mediatek,ibias = <0xc>; > +}; > + > +&i2c0 { > + status = "okay"; > + > + rt5650: audio-codec@1a { > + compatible = "realtek,rt5650"; > + reg = <0x1a>; > + avdd-supply = <&mt6397_vgp1_reg>; > + cpvdd-supply = <&mt6397_vcama_reg>; Hm, only defined for "realtek,rt5663", I suppose that's an inconsistency in the binding documentation. Can you please double check? > + interrupt-parent = <&pio>; > + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&rt5650_irq>; > + #sound-dai-cells = <1>; > + realtek,dmic1-data-pin = <2>; > + realtek,jd-mode = <2>; > + }; > + > + ps8640: edp-bridge@8 { > + compatible = "parade,ps8640"; > + reg = <0x8>; > + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; > + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&ps8640_pins>; > + vdd12-supply = <&ps8640_fixed_1v2>; > + vdd33-supply = <&mt6397_vgp2_reg>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + ps8640_in: endpoint { > + remote-endpoint = <&dsi0_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + ps8640_out: endpoint { > + remote-endpoint = <&panel_in>; > + }; > + }; > + }; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <1500000>; > + status = "okay"; > + > + da9211: da9211@68 { > + compatible = "dlg,da9211"; > + reg = <0x68>; > + no interrupts? binding description have this stated as required. what happens when the device raises an interrupt? > + regulators { > + da9211_vcpu_reg: BUCKA { > + regulator-name = "VBUCKA"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1310000>; > + regulator-min-microamp = <2000000>; > + regulator-max-microamp = <4400000>; > + regulator-ramp-delay = <10000>; > + regulator-always-on; > + regulator-allowed-modes = <0 1>; > + }; > + > + da9211_vgpu_reg: BUCKB { > + regulator-name = "VBUCKB"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1310000>; > + regulator-min-microamp = <2000000>; > + regulator-max-microamp = <3000000>; > + regulator-ramp-delay = <10000>; > + }; > + }; > + }; > +}; > + > +&i2c2 { > + status = "okay"; > + > + tpm: tpm@20 { > + compatible = "infineon,slb9645tt"; > + reg = <0x20>; > + powered-while-suspended; > + }; > +}; > + > +&i2c3 { > + clock-frequency = <400000>; > + status = "okay"; > + > + touchscreen: touchscreen@10 { > + compatible = "elan,ekth3500"; > + reg = <0x10>; > + interrupt-parent = <&pio>; > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > + }; > +}; > + > +&i2c4 { > + clock-frequency = <400000>; > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&trackpad_irq>; Why not move the pinctrl properties into the trackpad node? > + > + trackpad: trackpad@15 { > + compatible = "elan,ekth3000"; > + interrupt-parent = <&pio>; > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > + reg = <0x15>; > + vcc-supply = <&mt6397_vgp6_reg>; > + wakeup-source; > + }; > +}; > + > +&mipi_tx0 { > + status = "okay"; > +}; > + > +&mmc0 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc0_pins_default>; > + pinctrl-1 = <&mmc0_pins_uhs>; > + bus-width = <8>; > + max-frequency = <200000000>; > + cap-mmc-highspeed; > + mmc-hs200-1_8v; > + mmc-hs400-1_8v; > + cap-mmc-hw-reset; > + hs400-ds-delay = <0x14015>; > + mediatek,hs200-cmd-int-delay=<30>; > + mediatek,hs400-cmd-int-delay=<14>; > + mediatek,hs400-cmd-resp-sel-rising; > + vmmc-supply = <&mt6397_vemc_3v3_reg>; > + vqmmc-supply = <&mt6397_vio18_reg>; > + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; > + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; > + non-removable; > +}; > + > +&mmc1 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc1_pins_default>; > + pinctrl-1 = <&mmc1_pins_uhs>; > + bus-width = <4>; > + max-frequency = <200000000>; > + cap-sd-highspeed; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; > + vmmc-supply = <&mt6397_vmch_reg>; > + vqmmc-supply = <&mt6397_vmc_reg>; > +}; > + > +&mmc3 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc3_pins_default>; > + pinctrl-1 = <&mmc3_pins_uhs>; > + bus-width = <4>; > + max-frequency = <200000000>; > + cap-sd-highspeed; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + sdr104-clk-delay = <5>; Not an upstream property, please delete it. > + keep-power-in-suspend; > + enable-sdio-wakeup; > + cap-sdio-irq; > + vmmc-supply = <&sdio_fixed_3v3>; > + vqmmc-supply = <&mt6397_vgp3_reg>; > + non-removable; > + cap-power-off-card; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + btmrvl: btmrvl@2 { > + compatible = "marvell,sd8897-bt"; > + reg = <2>; > + interrupt-parent = <&pio>; > + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; > + marvell,wakeup-pin = /bits/ 16 <0x0d>; > + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; > + }; > + > + mwifiex: mwifiex@1 { > + compatible = "marvell,sd8897"; > + reg = <1>; > + interrupt-parent = <&pio>; > + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; > + marvell,wakeup-pin = <3>; > + marvell,caldata_ed_mac = /bits/ 8 < > +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > + >; Not an upstream property, please delete. > + }; > +}; > + > +&nor_flash { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&nor_gpio1_pins>; > + bus-width = <8>; > + max-frequency = <50000000>; > + non-removable; > + flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + }; > +}; > + > +&pio { > + aud_i2s2: aud_i2s2 { > + pins1 { > + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, > + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, > + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, > + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, > + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, > + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, > + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; > + bias-pull-down; > + }; > + }; > + > + bl_fixed_pins: bl_fixed_pins { > + pins1 { > + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; > + output-low; > + }; > + }; > + > + bt_wake_pins: bt_wake_pins { > + pins1 { > + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; > + bias-pull-up; > + }; > + }; > + > + disp_pwm0_pins: disp_pwm0_pins { > + pins1 { > + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; > + output-low; > + }; > + }; > + > + gpio_keys_pins: gpio_keys_pins { > + volume_pins { > + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, > + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; > + bias-pull-up; > + }; > + > + tablet_mode_pins { > + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; > + bias-pull-up; > + }; > + }; > + > + hdmi_mux_pins: hdmi_mux_pins { > + pins1 { > + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; > + }; > + }; > + > + mmc0_pins_default: mmc0default { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > + bias-pull-up; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > + bias-pull-down; identation. > + }; > + > + pins_rst { > + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > + bias-pull-up; > + }; > + }; > + > + mmc1_pins_default: mmc1default { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > + bias-pull-down; > + drive-strength = <MTK_DRIVE_4mA>; > + }; > + > + pins_insert { > + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; > + bias-pull-up; > + }; > + }; > + > + mmc3_pins_default: mmc3default { > + pins_dat { > + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_cmd { > + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > + bias-pull-down; > + drive-strength = <MTK_DRIVE_8mA>; > + }; > + > + pins_pdn { > + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; > + output-low; > + }; > + }; > + > + mmc0_pins_uhs: mmc0 { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_ds { > + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; > + drive-strength = <MTK_DRIVE_10mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_rst { > + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > + bias-pull-up; > + }; > + }; > + > + mmc1_pins_uhs: mmc1 { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + }; > + > + mmc3_pins_uhs: mmc3 { > + pins_dat { > + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_cmd { > + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + }; > + > + nor_gpio1_pins: nor { > + pins1 { > + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, > + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, > + <MT8173_PIN_8_EINT8__FUNC_SFIN>; > + input-enable; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up; > + }; > + > + pins2 { > + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; > + input-enable; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up; > + }; > + }; > + > + panel_fixed_pins: panel_fixed_pins { > + pins1 { > + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; > + }; > + }; > + > + ps8640_pins: ps8640_pins { > + pins1 { > + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, > + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, > + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; > + }; > + }; > + > + ps8640_fixed_pins: ps8640_fixed_pins { > + pins1 { > + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; > + }; > + }; > + > + rt5650_irq: rt5650_irq { > + pins1 { > + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; > + bias-pull-down; > + }; > + }; > + > + spi_pins_a: spi1 { > + pins1 { > + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; > + bias-pull-up; > + }; > + > + pins_spi { > + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, > + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, > + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, > + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; > + bias-disable; > + }; > + }; > + > + trackpad_irq: trackpad_irq { > + pins1 { > + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; > + input-enable; > + bias-pull-up; > + }; > + }; > + > + usb_pins: usb@0 { > + pins1 { > + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; > + output-high; > + bias-disable; > + }; > + }; > + > + wifi_wake_pins: wifi_wake_pins { > + pins1 { > + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; > + bias-pull-up; > + }; > + }; > +}; > + > +&pwm0 { > + status = "okay"; > +}; > + > +&pwrap { > + pmic: mt6397 { > + compatible = "mediatek,mt6397"; > + #address-cells = <1>; > + #size-cells = <1>; > + interrupt-parent = <&pio>; > + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + mt6397rtc: mt6397rtc { AFAIK this should be rtc: mt6397rtc { Please fix that for all subnodes. > + compatible = "mediatek,mt6397-rtc"; > + }; > + > + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { > + compatible = "mediatek,mt6397-pctl-pmic-syscfg", > + "syscon"; > + reg = <0 0x0000c000 0 0x0108>; not an upstream compatible, please delete the node. > + }; > + > + pio6397: pinctrl@c000 { > + compatible = "mediatek,mt6397-pinctrl"; > + pins-are-numbered; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + mt6397clock: mt6397clock { > + compatible = "mediatek,mt6397-clk"; > + #clock-cells = <1>; > + }; > + > + mt6397regulator: mt6397regulator { > + compatible = "mediatek,mt6397-regulator"; > + > + mt6397_vpca15_reg: buck_vpca15 { > + regulator-compatible = "buck_vpca15"; > + regulator-name = "vpca15"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + regulator-allowed-modes = <0 1>; > + }; > + > + mt6397_vpca7_reg: buck_vpca7 { > + regulator-compatible = "buck_vpca7"; > + regulator-name = "vpca7"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <115>; > + regulator-always-on; > + }; > + > + mt6397_vsramca15_reg: buck_vsramca15 { > + regulator-compatible = "buck_vsramca15"; > + regulator-name = "vsramca15"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vsramca7_reg: buck_vsramca7 { > + regulator-compatible = "buck_vsramca7"; > + regulator-name = "vsramca7"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vcore_reg: buck_vcore { > + regulator-compatible = "buck_vcore"; > + regulator-name = "vcore"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vgpu_reg: buck_vgpu { > + regulator-compatible = "buck_vgpu"; > + regulator-name = "vgpu"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <115>; > + }; > + > + mt6397_vdrm_reg: buck_vdrm { > + regulator-compatible = "buck_vdrm"; > + regulator-name = "vdrm"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1400000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vio18_reg: buck_vio18 { > + regulator-compatible = "buck_vio18"; > + regulator-name = "vio18"; > + regulator-min-microvolt = <1620000>; > + regulator-max-microvolt = <1980000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vtcxo_reg: ldo_vtcxo { > + regulator-compatible = "ldo_vtcxo"; > + regulator-name = "vtcxo"; > + regulator-always-on; > + }; > + > + mt6397_va28_reg: ldo_va28 { > + regulator-compatible = "ldo_va28"; > + regulator-name = "va28"; > + }; > + > + mt6397_vcama_reg: ldo_vcama { > + regulator-compatible = "ldo_vcama"; > + regulator-name = "vcama"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vio28_reg: ldo_vio28 { > + regulator-compatible = "ldo_vio28"; > + regulator-name = "vio28"; > + regulator-always-on; > + }; > + > + mt6397_vusb_reg: ldo_vusb { > + regulator-compatible = "ldo_vusb"; > + regulator-name = "vusb"; > + }; > + > + mt6397_vmc_reg: ldo_vmc { > + regulator-compatible = "ldo_vmc"; > + regulator-name = "vmc"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vmch_reg: ldo_vmch { > + regulator-compatible = "ldo_vmch"; > + regulator-name = "vmch"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vemc_3v3_reg: ldo_vemc3v3 { > + regulator-compatible = "ldo_vemc3v3"; > + regulator-name = "vemc_3v3"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp1_reg: ldo_vgp1 { > + regulator-compatible = "ldo_vgp1"; > + regulator-name = "vcamd"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <240>; > + }; > + > + mt6397_vgp2_reg: ldo_vgp2 { > + regulator-compatible = "ldo_vgp2"; > + regulator-name = "vcamio"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp3_reg: ldo_vgp3 { > + regulator-compatible = "ldo_vgp3"; > + regulator-name = "vcamaf"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp4_reg: ldo_vgp4 { > + regulator-compatible = "ldo_vgp4"; > + regulator-name = "vgp4"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp5_reg: ldo_vgp5 { > + regulator-compatible = "ldo_vgp5"; > + regulator-name = "vgp5"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3000000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp6_reg: ldo_vgp6 { > + regulator-compatible = "ldo_vgp6"; > + regulator-name = "vgp6"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + regulator-always-on; > + }; > + > + mt6397_vibr_reg: ldo_vibr { > + regulator-compatible = "ldo_vibr"; > + regulator-name = "vibr"; > + regulator-min-microvolt = <1300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + }; > + }; > +}; > + > +&spi { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi_pins_a>; > + mediatek,pad-select = <1>; > + status = "okay"; > + /* clients */ > + cros_ec: ec@0 { > + compatible = "google,cros-ec-spi"; > + reg = <0x0>; > + spi-max-frequency = <12000000>; > + interrupt-parent = <&pio>; > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > + google,cros-ec-spi-msg-delay = <500>; > + > + i2c_tunnel: i2c-tunnel@0 { > + compatible = "google,cros-ec-i2c-tunnel"; > + google,remote-bus = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + battery: sbs-battery@b { > + compatible = "sbs,sbs-battery"; > + reg = <0xb>; > + sbs,i2c-retry-count = <2>; > + sbs,poll-retry-count = <1>; > + }; > + }; > + }; > +}; > + > +&thermal { > + bank0-supply = <&mt6397_vpca15_reg>; > + bank1-supply = <&da9211_vcpu_reg>; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&ssusb { > + dr_mode = "host"; > + wakeup-source; > + vusb33-supply = <&mt6397_vusb_reg>; > + status = "okay"; > +}; > + > +&usb_host { > + pinctrl-names = "default"; > + pinctrl-0 = <&usb_pins>; > + vusb33-supply = <&mt6397_vusb_reg>; > + status = "okay"; > +}; > + > +#include "../../../../arm/boot/dts/cros-ec-keyboard.dtsi" Why don't we use #include <arm/cros-ec-keyboard.dtsi> ? > \ No newline at end of file > As Yingjoe already mentioned, please add a newline :) Regards, Matthias _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board @ 2020-01-10 13:42 ` Matthias Brugger 0 siblings, 0 replies; 42+ messages in thread From: Matthias Brugger @ 2020-01-10 13:42 UTC (permalink / raw) To: Hsin-Yi Wang, linux-arm-kernel Cc: Mark Rutland, devicetree, Nicolas Boichat, linux-kernel, Rob Herring, linux-mediatek, Enric Balletbo i Serra On 10/01/2020 08:37, Hsin-Yi Wang wrote: > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > SoC. > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > --- > Changes in v2: > - remove downstream nodes and unused nodes > - use GPIO_ACTIVE_LOW for ps8640 gpios > - move trackpad to hana > --- > arch/arm64/boot/dts/mediatek/Makefile | 3 + > .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > 6 files changed, 1161 insertions(+) > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > index 458bbc422a94..b45a45a565a1 100644 > --- a/arch/arm64/boot/dts/mediatek/Makefile > +++ b/arch/arm64/boot/dts/mediatek/Makefile > @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > new file mode 100644 > index 000000000000..a3616bc3d859 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > @@ -0,0 +1,27 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2019 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm-hana.dtsi" > + > +/ { > + model = "Mediatek Hana rev7 board"; > + compatible = "google,hana-rev7", "mediatek,mt8173"; > +}; > + > +&cpu_thermal { > + trips { > + cpu_crit: cpu_crit@0 { > + temperature = <100000>; > + type = "critical"; > + }; > + }; > +}; > + > +&gpio_keys { > + /delete-node/tablet_mode; > + /delete-node/volume_down; > + /delete-node/volume_up; > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > new file mode 100644 > index 000000000000..8cbcc75192e3 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > @@ -0,0 +1,16 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm-hana.dtsi" > + > +/ { > + model = "Mediatek Hana rev0 board"; > + compatible = "google,hana-rev6", > + "google,hana-rev5", "google,hana-rev4", > + "google,hana-rev3", "google,hana-rev2", > + "google,hana-rev1", "google,hana-rev0", > + "google,hana", "mediatek,mt8173"; > +}; I'm a bit confused about all this versions. Do you want to keep them for internal use, as I suppose only rev6 is available to the general public, correct? I'm fine with keeping the old revisions if that's of use for you, otherwise I'd prefer to delete them. Model name could be more verbose. > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > new file mode 100644 > index 000000000000..35e12b290947 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > @@ -0,0 +1,60 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +#include "mt8173-elm.dtsi" > + > +&i2c0 { > + clock-frequency = <200000>; > +}; > + > +&i2c3 { > + touchscreen2: touchscreen@34 { > + compatible = "melfas,mip4_ts"; > + reg = <0x34>; > + interrupt-parent = <&pio>; > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + touchscreen3: touchscreen@20 { > + compatible = "hid-over-i2c"; > + reg = <0x20>; > + hid-descr-addr = <0x0020>; > + interrupt-parent = <&pio>; > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > + }; In v1 you mentioned: "Partners wants to increase touchpad and touchscreen source (they choose synaptics) for hana 300e, and synaptics uses hid-over-i2c driver." So the partner uses the same compatible (google,hana-rev6?) for both devices? > +}; > + > +&i2c4 { > + trackpad2: trackpad@2c { > + compatible = "hid-over-i2c"; > + interrupt-parent = <&pio>; > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > + reg = <0x2c>; > + hid-descr-addr = <0x0020>; > + wakeup-source; > + }; > +}; > + > +&mmc1 { > + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; > +}; > + > +&pio { > + hdmi_mux_pins: hdmi_mux_pins { > + pins2 { > + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; > + bias-pull-up; > + output-high; > + }; > + }; > + > + mmc1_pins_default: mmc1default { > + pins_wp { > + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; > + input-enable; > + bias-pull-up; > + }; > + }; > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > new file mode 100644 > index 000000000000..e5da2355760e > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > @@ -0,0 +1,15 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm.dtsi" > + > +/ { > + model = "Mediatek Elm board"; > + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", > + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", > + "google,elm-rev2", "google,elm-rev1", > + "google,elm", "mediatek,mt8173"; > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > new file mode 100644 > index 000000000000..2ac738bebe04 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > @@ -0,0 +1,1040 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/gpio/gpio.h> > +#include "mt8173.dtsi" > + > +/ { > + aliases { > + serial0 = &uart0; > + serial1 = &uart1; > + serial2 = &uart2; > + serial3 = &uart3; > + }; > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0 0x40000000 0 0x80000000>; > + }; > + > + backlight_lcd: backlight_lcd { > + compatible = "pwm-backlight"; > + pwms = <&pwm0 0 1000000>; > + brightness-levels = < > + 0 16 32 48 64 80 96 112 > + 128 144 160 176 192 208 224 240 > + 255 > + >; > + default-brightness-level = <9>; > + power-supply = <&bl_fixed_reg>; > + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&disp_pwm0_pins>; > + status = "okay"; > + }; > + > + bl_fixed_reg: fixedregulator@2 { > + compatible = "regulator-fixed"; > + regulator-name = "bl_fixed"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + startup-delay-us = <1000>; > + enable-active-high; > + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&bl_fixed_pins>; > + }; > + > + chosen { > + stdout-path = &uart0; > + }; > + > + gpio_keys: gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&gpio_keys_pins>; > + > + lid { > + label = "Lid"; > + gpios = <&pio 69 GPIO_ACTIVE_LOW>; > + linux,code = <0>; /* SW_LID */ > + linux,input-type = <5>; /* EV_SW */ > + gpio-key,wakeup; > + }; > + > + power { > + label = "Power"; > + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; > + linux,code = <KEY_POWER>; > + debounce-interval = <30>; > + gpio-key,wakeup; > + }; > + > + tablet_mode { > + label = "Tablet_mode"; > + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; > + linux,code = <1>; /* SW_TABLET_MODE */ can't we use SW_TABLET_MODE fomr linux-event-codes.h? > + linux,input-type = <5>; /* EV_SW */ same here. > + gpio-key,wakeup; > + }; > + > + volume_down { > + label = "Volume_down"; > + gpios = <&pio 123 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEDOWN>; > + }; > + > + volume_up { > + label = "Volume_up"; > + gpios = <&pio 124 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEUP>; > + }; > + }; > + > + panel: panel { > + compatible = "lg,lp120up1"; > + power-supply = <&panel_fixed_3v3>; > + ddc-i2c-bus = <&i2c0>; > + backlight = <&backlight_lcd>; > + > + port { > + panel_in: endpoint { > + remote-endpoint = <&ps8640_out>; > + }; > + }; > + }; > + > + panel_fixed_3v3: regulator@1 { > + compatible = "regulator-fixed"; > + regulator-name = "PANEL_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + enable-active-high; > + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&panel_fixed_pins>; > + }; > + > + ps8640_fixed_1v2: regulator@2 { > + compatible = "regulator-fixed"; > + regulator-name = "PS8640_1V2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-enable-ramp-delay = <2000>; > + enable-active-high; > + regulator-boot-on; > + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&ps8640_fixed_pins>; > + }; > + > + sdio_fixed_3v3: fixedregulator@0 { > + compatible = "regulator-fixed"; > + regulator-name = "3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; we don't need to set the pincontroller mux here? > + }; > + > + sound: sound { > + compatible = "mediatek,mt8173-rt5650"; > + mediatek,audio-codec = <&rt5650 &hdmi0>; > + mediatek,platform = <&afe>; > + pinctrl-names = "default"; > + pinctrl-0 = <&aud_i2s2>; > + > + mediatek,mclk = <1>; > + codec-capture { > + sound-dai = <&rt5650 1>; > + }; > + }; > + > + hdmicon: connector { > + compatible = "hdmi-connector"; > + label = "hdmi"; > + type = "a"; > + ddc-i2c-bus = <&hdmiddc0>; > + > + port { > + hdmi_connector_in: endpoint { > + remote-endpoint = <&hdmi0_out>; > + }; > + }; > + }; > +}; > + > +&cec { > + status = "okay"; > +}; > + > +&cpu0 { > + proc-supply = <&mt6397_vpca15_reg>; > +}; > + > +&cpu1 { > + proc-supply = <&mt6397_vpca15_reg>; > +}; > + > +&cpu2 { > + proc-supply = <&da9211_vcpu_reg>; > + sram-supply = <&mt6397_vsramca7_reg>; > +}; > + > +&cpu3 { > + proc-supply = <&da9211_vcpu_reg>; > + sram-supply = <&mt6397_vsramca7_reg>; > +}; > + > +&cpu_thermal { > + sustainable-power = <4500>; /* milliwatts */ > + trips { > + threshold: trip-point@0 { > + temperature = <60000>; > + }; > + > + target: trip-point@1 { > + temperature = <65000>; > + }; > + }; > +}; > + > +&dsi0 { > + status = "okay"; > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + dsi0_out: endpoint { > + remote-endpoint = <&ps8640_in>; > + }; > + }; > + }; > +}; > + > +&dpi0 { > + status = "okay"; > +}; > + > +&hdmi0 { > + status = "okay"; > + ports { > + port@1 { > + reg = <1>; > + > + hdmi0_out: endpoint { > + remote-endpoint = <&hdmi_connector_in>; > + }; > + }; > + }; > +}; > + > +&hdmi_phy { > + status = "okay"; > + mediatek,ibias = <0xc>; > +}; > + > +&i2c0 { > + status = "okay"; > + > + rt5650: audio-codec@1a { > + compatible = "realtek,rt5650"; > + reg = <0x1a>; > + avdd-supply = <&mt6397_vgp1_reg>; > + cpvdd-supply = <&mt6397_vcama_reg>; Hm, only defined for "realtek,rt5663", I suppose that's an inconsistency in the binding documentation. Can you please double check? > + interrupt-parent = <&pio>; > + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&rt5650_irq>; > + #sound-dai-cells = <1>; > + realtek,dmic1-data-pin = <2>; > + realtek,jd-mode = <2>; > + }; > + > + ps8640: edp-bridge@8 { > + compatible = "parade,ps8640"; > + reg = <0x8>; > + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; > + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&ps8640_pins>; > + vdd12-supply = <&ps8640_fixed_1v2>; > + vdd33-supply = <&mt6397_vgp2_reg>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + ps8640_in: endpoint { > + remote-endpoint = <&dsi0_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + ps8640_out: endpoint { > + remote-endpoint = <&panel_in>; > + }; > + }; > + }; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <1500000>; > + status = "okay"; > + > + da9211: da9211@68 { > + compatible = "dlg,da9211"; > + reg = <0x68>; > + no interrupts? binding description have this stated as required. what happens when the device raises an interrupt? > + regulators { > + da9211_vcpu_reg: BUCKA { > + regulator-name = "VBUCKA"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1310000>; > + regulator-min-microamp = <2000000>; > + regulator-max-microamp = <4400000>; > + regulator-ramp-delay = <10000>; > + regulator-always-on; > + regulator-allowed-modes = <0 1>; > + }; > + > + da9211_vgpu_reg: BUCKB { > + regulator-name = "VBUCKB"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1310000>; > + regulator-min-microamp = <2000000>; > + regulator-max-microamp = <3000000>; > + regulator-ramp-delay = <10000>; > + }; > + }; > + }; > +}; > + > +&i2c2 { > + status = "okay"; > + > + tpm: tpm@20 { > + compatible = "infineon,slb9645tt"; > + reg = <0x20>; > + powered-while-suspended; > + }; > +}; > + > +&i2c3 { > + clock-frequency = <400000>; > + status = "okay"; > + > + touchscreen: touchscreen@10 { > + compatible = "elan,ekth3500"; > + reg = <0x10>; > + interrupt-parent = <&pio>; > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > + }; > +}; > + > +&i2c4 { > + clock-frequency = <400000>; > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&trackpad_irq>; Why not move the pinctrl properties into the trackpad node? > + > + trackpad: trackpad@15 { > + compatible = "elan,ekth3000"; > + interrupt-parent = <&pio>; > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > + reg = <0x15>; > + vcc-supply = <&mt6397_vgp6_reg>; > + wakeup-source; > + }; > +}; > + > +&mipi_tx0 { > + status = "okay"; > +}; > + > +&mmc0 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc0_pins_default>; > + pinctrl-1 = <&mmc0_pins_uhs>; > + bus-width = <8>; > + max-frequency = <200000000>; > + cap-mmc-highspeed; > + mmc-hs200-1_8v; > + mmc-hs400-1_8v; > + cap-mmc-hw-reset; > + hs400-ds-delay = <0x14015>; > + mediatek,hs200-cmd-int-delay=<30>; > + mediatek,hs400-cmd-int-delay=<14>; > + mediatek,hs400-cmd-resp-sel-rising; > + vmmc-supply = <&mt6397_vemc_3v3_reg>; > + vqmmc-supply = <&mt6397_vio18_reg>; > + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; > + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; > + non-removable; > +}; > + > +&mmc1 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc1_pins_default>; > + pinctrl-1 = <&mmc1_pins_uhs>; > + bus-width = <4>; > + max-frequency = <200000000>; > + cap-sd-highspeed; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; > + vmmc-supply = <&mt6397_vmch_reg>; > + vqmmc-supply = <&mt6397_vmc_reg>; > +}; > + > +&mmc3 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc3_pins_default>; > + pinctrl-1 = <&mmc3_pins_uhs>; > + bus-width = <4>; > + max-frequency = <200000000>; > + cap-sd-highspeed; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + sdr104-clk-delay = <5>; Not an upstream property, please delete it. > + keep-power-in-suspend; > + enable-sdio-wakeup; > + cap-sdio-irq; > + vmmc-supply = <&sdio_fixed_3v3>; > + vqmmc-supply = <&mt6397_vgp3_reg>; > + non-removable; > + cap-power-off-card; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + btmrvl: btmrvl@2 { > + compatible = "marvell,sd8897-bt"; > + reg = <2>; > + interrupt-parent = <&pio>; > + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; > + marvell,wakeup-pin = /bits/ 16 <0x0d>; > + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; > + }; > + > + mwifiex: mwifiex@1 { > + compatible = "marvell,sd8897"; > + reg = <1>; > + interrupt-parent = <&pio>; > + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; > + marvell,wakeup-pin = <3>; > + marvell,caldata_ed_mac = /bits/ 8 < > +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > + >; Not an upstream property, please delete. > + }; > +}; > + > +&nor_flash { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&nor_gpio1_pins>; > + bus-width = <8>; > + max-frequency = <50000000>; > + non-removable; > + flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + }; > +}; > + > +&pio { > + aud_i2s2: aud_i2s2 { > + pins1 { > + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, > + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, > + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, > + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, > + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, > + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, > + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; > + bias-pull-down; > + }; > + }; > + > + bl_fixed_pins: bl_fixed_pins { > + pins1 { > + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; > + output-low; > + }; > + }; > + > + bt_wake_pins: bt_wake_pins { > + pins1 { > + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; > + bias-pull-up; > + }; > + }; > + > + disp_pwm0_pins: disp_pwm0_pins { > + pins1 { > + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; > + output-low; > + }; > + }; > + > + gpio_keys_pins: gpio_keys_pins { > + volume_pins { > + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, > + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; > + bias-pull-up; > + }; > + > + tablet_mode_pins { > + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; > + bias-pull-up; > + }; > + }; > + > + hdmi_mux_pins: hdmi_mux_pins { > + pins1 { > + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; > + }; > + }; > + > + mmc0_pins_default: mmc0default { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > + bias-pull-up; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > + bias-pull-down; identation. > + }; > + > + pins_rst { > + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > + bias-pull-up; > + }; > + }; > + > + mmc1_pins_default: mmc1default { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > + bias-pull-down; > + drive-strength = <MTK_DRIVE_4mA>; > + }; > + > + pins_insert { > + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; > + bias-pull-up; > + }; > + }; > + > + mmc3_pins_default: mmc3default { > + pins_dat { > + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_cmd { > + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > + bias-pull-down; > + drive-strength = <MTK_DRIVE_8mA>; > + }; > + > + pins_pdn { > + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; > + output-low; > + }; > + }; > + > + mmc0_pins_uhs: mmc0 { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_ds { > + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; > + drive-strength = <MTK_DRIVE_10mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_rst { > + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > + bias-pull-up; > + }; > + }; > + > + mmc1_pins_uhs: mmc1 { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + }; > + > + mmc3_pins_uhs: mmc3 { > + pins_dat { > + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_cmd { > + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + }; > + > + nor_gpio1_pins: nor { > + pins1 { > + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, > + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, > + <MT8173_PIN_8_EINT8__FUNC_SFIN>; > + input-enable; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up; > + }; > + > + pins2 { > + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; > + input-enable; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up; > + }; > + }; > + > + panel_fixed_pins: panel_fixed_pins { > + pins1 { > + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; > + }; > + }; > + > + ps8640_pins: ps8640_pins { > + pins1 { > + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, > + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, > + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; > + }; > + }; > + > + ps8640_fixed_pins: ps8640_fixed_pins { > + pins1 { > + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; > + }; > + }; > + > + rt5650_irq: rt5650_irq { > + pins1 { > + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; > + bias-pull-down; > + }; > + }; > + > + spi_pins_a: spi1 { > + pins1 { > + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; > + bias-pull-up; > + }; > + > + pins_spi { > + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, > + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, > + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, > + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; > + bias-disable; > + }; > + }; > + > + trackpad_irq: trackpad_irq { > + pins1 { > + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; > + input-enable; > + bias-pull-up; > + }; > + }; > + > + usb_pins: usb@0 { > + pins1 { > + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; > + output-high; > + bias-disable; > + }; > + }; > + > + wifi_wake_pins: wifi_wake_pins { > + pins1 { > + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; > + bias-pull-up; > + }; > + }; > +}; > + > +&pwm0 { > + status = "okay"; > +}; > + > +&pwrap { > + pmic: mt6397 { > + compatible = "mediatek,mt6397"; > + #address-cells = <1>; > + #size-cells = <1>; > + interrupt-parent = <&pio>; > + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + mt6397rtc: mt6397rtc { AFAIK this should be rtc: mt6397rtc { Please fix that for all subnodes. > + compatible = "mediatek,mt6397-rtc"; > + }; > + > + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { > + compatible = "mediatek,mt6397-pctl-pmic-syscfg", > + "syscon"; > + reg = <0 0x0000c000 0 0x0108>; not an upstream compatible, please delete the node. > + }; > + > + pio6397: pinctrl@c000 { > + compatible = "mediatek,mt6397-pinctrl"; > + pins-are-numbered; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + mt6397clock: mt6397clock { > + compatible = "mediatek,mt6397-clk"; > + #clock-cells = <1>; > + }; > + > + mt6397regulator: mt6397regulator { > + compatible = "mediatek,mt6397-regulator"; > + > + mt6397_vpca15_reg: buck_vpca15 { > + regulator-compatible = "buck_vpca15"; > + regulator-name = "vpca15"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + regulator-allowed-modes = <0 1>; > + }; > + > + mt6397_vpca7_reg: buck_vpca7 { > + regulator-compatible = "buck_vpca7"; > + regulator-name = "vpca7"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <115>; > + regulator-always-on; > + }; > + > + mt6397_vsramca15_reg: buck_vsramca15 { > + regulator-compatible = "buck_vsramca15"; > + regulator-name = "vsramca15"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vsramca7_reg: buck_vsramca7 { > + regulator-compatible = "buck_vsramca7"; > + regulator-name = "vsramca7"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vcore_reg: buck_vcore { > + regulator-compatible = "buck_vcore"; > + regulator-name = "vcore"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vgpu_reg: buck_vgpu { > + regulator-compatible = "buck_vgpu"; > + regulator-name = "vgpu"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <115>; > + }; > + > + mt6397_vdrm_reg: buck_vdrm { > + regulator-compatible = "buck_vdrm"; > + regulator-name = "vdrm"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1400000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vio18_reg: buck_vio18 { > + regulator-compatible = "buck_vio18"; > + regulator-name = "vio18"; > + regulator-min-microvolt = <1620000>; > + regulator-max-microvolt = <1980000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vtcxo_reg: ldo_vtcxo { > + regulator-compatible = "ldo_vtcxo"; > + regulator-name = "vtcxo"; > + regulator-always-on; > + }; > + > + mt6397_va28_reg: ldo_va28 { > + regulator-compatible = "ldo_va28"; > + regulator-name = "va28"; > + }; > + > + mt6397_vcama_reg: ldo_vcama { > + regulator-compatible = "ldo_vcama"; > + regulator-name = "vcama"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vio28_reg: ldo_vio28 { > + regulator-compatible = "ldo_vio28"; > + regulator-name = "vio28"; > + regulator-always-on; > + }; > + > + mt6397_vusb_reg: ldo_vusb { > + regulator-compatible = "ldo_vusb"; > + regulator-name = "vusb"; > + }; > + > + mt6397_vmc_reg: ldo_vmc { > + regulator-compatible = "ldo_vmc"; > + regulator-name = "vmc"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vmch_reg: ldo_vmch { > + regulator-compatible = "ldo_vmch"; > + regulator-name = "vmch"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vemc_3v3_reg: ldo_vemc3v3 { > + regulator-compatible = "ldo_vemc3v3"; > + regulator-name = "vemc_3v3"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp1_reg: ldo_vgp1 { > + regulator-compatible = "ldo_vgp1"; > + regulator-name = "vcamd"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <240>; > + }; > + > + mt6397_vgp2_reg: ldo_vgp2 { > + regulator-compatible = "ldo_vgp2"; > + regulator-name = "vcamio"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp3_reg: ldo_vgp3 { > + regulator-compatible = "ldo_vgp3"; > + regulator-name = "vcamaf"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp4_reg: ldo_vgp4 { > + regulator-compatible = "ldo_vgp4"; > + regulator-name = "vgp4"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp5_reg: ldo_vgp5 { > + regulator-compatible = "ldo_vgp5"; > + regulator-name = "vgp5"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3000000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp6_reg: ldo_vgp6 { > + regulator-compatible = "ldo_vgp6"; > + regulator-name = "vgp6"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + regulator-always-on; > + }; > + > + mt6397_vibr_reg: ldo_vibr { > + regulator-compatible = "ldo_vibr"; > + regulator-name = "vibr"; > + regulator-min-microvolt = <1300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + }; > + }; > +}; > + > +&spi { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi_pins_a>; > + mediatek,pad-select = <1>; > + status = "okay"; > + /* clients */ > + cros_ec: ec@0 { > + compatible = "google,cros-ec-spi"; > + reg = <0x0>; > + spi-max-frequency = <12000000>; > + interrupt-parent = <&pio>; > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > + google,cros-ec-spi-msg-delay = <500>; > + > + i2c_tunnel: i2c-tunnel@0 { > + compatible = "google,cros-ec-i2c-tunnel"; > + google,remote-bus = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + battery: sbs-battery@b { > + compatible = "sbs,sbs-battery"; > + reg = <0xb>; > + sbs,i2c-retry-count = <2>; > + sbs,poll-retry-count = <1>; > + }; > + }; > + }; > +}; > + > +&thermal { > + bank0-supply = <&mt6397_vpca15_reg>; > + bank1-supply = <&da9211_vcpu_reg>; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&ssusb { > + dr_mode = "host"; > + wakeup-source; > + vusb33-supply = <&mt6397_vusb_reg>; > + status = "okay"; > +}; > + > +&usb_host { > + pinctrl-names = "default"; > + pinctrl-0 = <&usb_pins>; > + vusb33-supply = <&mt6397_vusb_reg>; > + status = "okay"; > +}; > + > +#include "../../../../arm/boot/dts/cros-ec-keyboard.dtsi" Why don't we use #include <arm/cros-ec-keyboard.dtsi> ? > \ No newline at end of file > As Yingjoe already mentioned, please add a newline :) Regards, Matthias _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board 2020-01-10 13:42 ` Matthias Brugger (?) @ 2020-01-13 18:01 ` Hsin-Yi Wang -1 siblings, 0 replies; 42+ messages in thread From: Hsin-Yi Wang @ 2020-01-13 18:01 UTC (permalink / raw) To: Matthias Brugger Cc: moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE, Rob Herring, Mark Rutland, Devicetree List, lkml, linux-mediatek, Nicolas Boichat, Enric Balletbo i Serra, Daniel Kurtz On Fri, Jan 10, 2020 at 9:42 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: > > Thanks, I will address the comments and send next version > > On 10/01/2020 08:37, Hsin-Yi Wang wrote: > > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > > SoC. > > > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > > --- > > Changes in v2: > > - remove downstream nodes and unused nodes > > - use GPIO_ACTIVE_LOW for ps8640 gpios > > - move trackpad to hana > > --- > > arch/arm64/boot/dts/mediatek/Makefile | 3 + > > .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > > .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > > .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > > arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > > arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > > 6 files changed, 1161 insertions(+) > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > > index 458bbc422a94..b45a45a565a1 100644 > > --- a/arch/arm64/boot/dts/mediatek/Makefile > > +++ b/arch/arm64/boot/dts/mediatek/Makefile > > @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > > new file mode 100644 > > index 000000000000..a3616bc3d859 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > > @@ -0,0 +1,27 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2019 MediaTek Inc. > > + */ > > + > > +/dts-v1/; > > +#include "mt8173-elm-hana.dtsi" > > + > > +/ { > > + model = "Mediatek Hana rev7 board"; > > + compatible = "google,hana-rev7", "mediatek,mt8173"; > > +}; > > + > > +&cpu_thermal { > > + trips { > > + cpu_crit: cpu_crit@0 { > > + temperature = <100000>; > > + type = "critical"; > > + }; > > + }; > > +}; > > + > > +&gpio_keys { > > + /delete-node/tablet_mode; > > + /delete-node/volume_down; > > + /delete-node/volume_up; > > +}; > > \ No newline at end of file > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > > new file mode 100644 > > index 000000000000..8cbcc75192e3 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > > @@ -0,0 +1,16 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2016 MediaTek Inc. > > + */ > > + > > +/dts-v1/; > > +#include "mt8173-elm-hana.dtsi" > > + > > +/ { > > + model = "Mediatek Hana rev0 board"; > > + compatible = "google,hana-rev6", > > + "google,hana-rev5", "google,hana-rev4", > > + "google,hana-rev3", "google,hana-rev2", > > + "google,hana-rev1", "google,hana-rev0", > > + "google,hana", "mediatek,mt8173"; > > +}; > > I'm a bit confused about all this versions. Do you want to keep them for > internal use, as I suppose only rev6 is available to the general public, > correct? I'm fine with keeping the old revisions if that's of use for you, > otherwise I'd prefer to delete them. According to internal feedback system, at least rev3, rev6, rev7 are in general public. I can delete rev0~rev2, since they are earlier version device. > > Model name could be more verbose. > > > \ No newline at end of file > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > > new file mode 100644 > > index 000000000000..35e12b290947 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > > @@ -0,0 +1,60 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2016 MediaTek Inc. > > + */ > > + > > +#include "mt8173-elm.dtsi" > > + > > +&i2c0 { > > + clock-frequency = <200000>; > > +}; > > + > > +&i2c3 { > > + touchscreen2: touchscreen@34 { > > + compatible = "melfas,mip4_ts"; > > + reg = <0x34>; > > + interrupt-parent = <&pio>; > > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > > + }; > > + > > + touchscreen3: touchscreen@20 { > > + compatible = "hid-over-i2c"; > > + reg = <0x20>; > > + hid-descr-addr = <0x0020>; > > + interrupt-parent = <&pio>; > > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > > + }; > > In v1 you mentioned: > "Partners wants to increase touchpad and touchscreen source (they choose > synaptics) for hana 300e, and synaptics uses hid-over-i2c driver." > > So the partner uses the same compatible (google,hana-rev6?) for both devices? > Confirmed with others, second source devices share same compatible. > > +}; > > + > > +&i2c4 { > > + trackpad2: trackpad@2c { > > + compatible = "hid-over-i2c"; > > + interrupt-parent = <&pio>; > > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > > + reg = <0x2c>; > > + hid-descr-addr = <0x0020>; > > + wakeup-source; > > + }; > > +}; > > + > > +&mmc1 { > > + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; > > +}; > > + > > +&pio { > > + hdmi_mux_pins: hdmi_mux_pins { > > + pins2 { > > + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; > > + bias-pull-up; > > + output-high; > > + }; > > + }; > > + > > + mmc1_pins_default: mmc1default { > > + pins_wp { > > + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; > > + input-enable; > > + bias-pull-up; > > + }; > > + }; > > +}; > > \ No newline at end of file > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > > new file mode 100644 > > index 000000000000..e5da2355760e > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > > @@ -0,0 +1,15 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2016 MediaTek Inc. > > + */ > > + > > +/dts-v1/; > > +#include "mt8173-elm.dtsi" > > + > > +/ { > > + model = "Mediatek Elm board"; > > + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", > > + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", > > + "google,elm-rev2", "google,elm-rev1", > > + "google,elm", "mediatek,mt8173"; > > +}; > > \ No newline at end of file > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > new file mode 100644 > > index 000000000000..2ac738bebe04 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > @@ -0,0 +1,1040 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2016 MediaTek Inc. > > + */ > > + > > +#include <dt-bindings/input/input.h> > > +#include <dt-bindings/gpio/gpio.h> > > +#include "mt8173.dtsi" > > + > > +/ { > > + aliases { > > + serial0 = &uart0; > > + serial1 = &uart1; > > + serial2 = &uart2; > > + serial3 = &uart3; > > + }; > > + > > + memory@40000000 { > > + device_type = "memory"; > > + reg = <0 0x40000000 0 0x80000000>; > > + }; > > + > > + backlight_lcd: backlight_lcd { > > + compatible = "pwm-backlight"; > > + pwms = <&pwm0 0 1000000>; > > + brightness-levels = < > > + 0 16 32 48 64 80 96 112 > > + 128 144 160 176 192 208 224 240 > > + 255 > > + >; > > + default-brightness-level = <9>; > > + power-supply = <&bl_fixed_reg>; > > + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; > > + > > + pinctrl-names = "default"; > > + pinctrl-0 = <&disp_pwm0_pins>; > > + status = "okay"; > > + }; > > + > > + bl_fixed_reg: fixedregulator@2 { > > + compatible = "regulator-fixed"; > > + regulator-name = "bl_fixed"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + startup-delay-us = <1000>; > > + enable-active-high; > > + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&bl_fixed_pins>; > > + }; > > + > > + chosen { > > + stdout-path = &uart0; > > + }; > > + > > + gpio_keys: gpio-keys { > > + compatible = "gpio-keys"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&gpio_keys_pins>; > > + > > + lid { > > + label = "Lid"; > > + gpios = <&pio 69 GPIO_ACTIVE_LOW>; > > + linux,code = <0>; /* SW_LID */ > > + linux,input-type = <5>; /* EV_SW */ > > + gpio-key,wakeup; > > + }; > > + > > + power { > > + label = "Power"; > > + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; > > + linux,code = <KEY_POWER>; > > + debounce-interval = <30>; > > + gpio-key,wakeup; > > + }; > > + > > + tablet_mode { > > + label = "Tablet_mode"; > > + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; > > + linux,code = <1>; /* SW_TABLET_MODE */ > > can't we use SW_TABLET_MODE fomr linux-event-codes.h? > Will fix this. > > + linux,input-type = <5>; /* EV_SW */ > > same here. > > > + gpio-key,wakeup; > > + }; > > + > > + volume_down { > > + label = "Volume_down"; > > + gpios = <&pio 123 GPIO_ACTIVE_LOW>; > > + linux,code = <KEY_VOLUMEDOWN>; > > + }; > > + > > + volume_up { > > + label = "Volume_up"; > > + gpios = <&pio 124 GPIO_ACTIVE_LOW>; > > + linux,code = <KEY_VOLUMEUP>; > > + }; > > + }; > > + > > + panel: panel { > > + compatible = "lg,lp120up1"; > > + power-supply = <&panel_fixed_3v3>; > > + ddc-i2c-bus = <&i2c0>; > > + backlight = <&backlight_lcd>; > > + > > + port { > > + panel_in: endpoint { > > + remote-endpoint = <&ps8640_out>; > > + }; > > + }; > > + }; > > + > > + panel_fixed_3v3: regulator@1 { > > + compatible = "regulator-fixed"; > > + regulator-name = "PANEL_3V3"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + enable-active-high; > > + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&panel_fixed_pins>; > > + }; > > + > > + ps8640_fixed_1v2: regulator@2 { > > + compatible = "regulator-fixed"; > > + regulator-name = "PS8640_1V2"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <1200000>; > > + regulator-enable-ramp-delay = <2000>; > > + enable-active-high; > > + regulator-boot-on; > > + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&ps8640_fixed_pins>; > > + }; > > + > > + sdio_fixed_3v3: fixedregulator@0 { > > + compatible = "regulator-fixed"; > > + regulator-name = "3V3"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; > > we don't need to set the pincontroller mux here? > Will double check on schematic and add it. > > + }; > > + > > + sound: sound { > > + compatible = "mediatek,mt8173-rt5650"; > > + mediatek,audio-codec = <&rt5650 &hdmi0>; > > + mediatek,platform = <&afe>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&aud_i2s2>; > > + > > + mediatek,mclk = <1>; > > + codec-capture { > > + sound-dai = <&rt5650 1>; > > + }; > > + }; > > + > > + hdmicon: connector { > > + compatible = "hdmi-connector"; > > + label = "hdmi"; > > + type = "a"; > > + ddc-i2c-bus = <&hdmiddc0>; > > + > > + port { > > + hdmi_connector_in: endpoint { > > + remote-endpoint = <&hdmi0_out>; > > + }; > > + }; > > + }; > > +}; > > + > > +&cec { > > + status = "okay"; > > +}; > > + > > +&cpu0 { > > + proc-supply = <&mt6397_vpca15_reg>; > > +}; > > + > > +&cpu1 { > > + proc-supply = <&mt6397_vpca15_reg>; > > +}; > > + > > +&cpu2 { > > + proc-supply = <&da9211_vcpu_reg>; > > + sram-supply = <&mt6397_vsramca7_reg>; > > +}; > > + > > +&cpu3 { > > + proc-supply = <&da9211_vcpu_reg>; > > + sram-supply = <&mt6397_vsramca7_reg>; > > +}; > > + > > +&cpu_thermal { > > + sustainable-power = <4500>; /* milliwatts */ > > + trips { > > + threshold: trip-point@0 { > > + temperature = <60000>; > > + }; > > + > > + target: trip-point@1 { > > + temperature = <65000>; > > + }; > > + }; > > +}; > > + > > +&dsi0 { > > + status = "okay"; > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@1 { > > + dsi0_out: endpoint { > > + remote-endpoint = <&ps8640_in>; > > + }; > > + }; > > + }; > > +}; > > + > > +&dpi0 { > > + status = "okay"; > > +}; > > + > > +&hdmi0 { > > + status = "okay"; > > + ports { > > + port@1 { > > + reg = <1>; > > + > > + hdmi0_out: endpoint { > > + remote-endpoint = <&hdmi_connector_in>; > > + }; > > + }; > > + }; > > +}; > > + > > +&hdmi_phy { > > + status = "okay"; > > + mediatek,ibias = <0xc>; > > +}; > > + > > +&i2c0 { > > + status = "okay"; > > + > > + rt5650: audio-codec@1a { > > + compatible = "realtek,rt5650"; > > + reg = <0x1a>; > > + avdd-supply = <&mt6397_vgp1_reg>; > > + cpvdd-supply = <&mt6397_vcama_reg>; > > Hm, only defined for "realtek,rt5663", I suppose that's an inconsistency in the > binding documentation. Can you please double check? > This one? https://github.com/torvalds/linux/blob/master/sound/soc/codecs/rt5645.c#L3582 > > + interrupt-parent = <&pio>; > > + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&rt5650_irq>; > > + #sound-dai-cells = <1>; > > + realtek,dmic1-data-pin = <2>; > > + realtek,jd-mode = <2>; > > + }; > > + > > + ps8640: edp-bridge@8 { > > + compatible = "parade,ps8640"; > > + reg = <0x8>; > > + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; > > + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&ps8640_pins>; > > + vdd12-supply = <&ps8640_fixed_1v2>; > > + vdd33-supply = <&mt6397_vgp2_reg>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + > > + ps8640_in: endpoint { > > + remote-endpoint = <&dsi0_out>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + > > + ps8640_out: endpoint { > > + remote-endpoint = <&panel_in>; > > + }; > > + }; > > + }; > > + }; > > +}; > > + > > +&i2c1 { > > + clock-frequency = <1500000>; > > + status = "okay"; > > + > > + da9211: da9211@68 { > > + compatible = "dlg,da9211"; > > + reg = <0x68>; > > + > > no interrupts? binding description have this stated as required. what happens > when the device raises an interrupt? Will double check on schematic and add it. > > > + regulators { > > + da9211_vcpu_reg: BUCKA { > > + regulator-name = "VBUCKA"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1310000>; > > + regulator-min-microamp = <2000000>; > > + regulator-max-microamp = <4400000>; > > + regulator-ramp-delay = <10000>; > > + regulator-always-on; > > + regulator-allowed-modes = <0 1>; > > + }; > > + > > + da9211_vgpu_reg: BUCKB { > > + regulator-name = "VBUCKB"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1310000>; > > + regulator-min-microamp = <2000000>; > > + regulator-max-microamp = <3000000>; > > + regulator-ramp-delay = <10000>; > > + }; > > + }; > > + }; > > +}; > > + > > +&i2c2 { > > + status = "okay"; > > + > > + tpm: tpm@20 { > > + compatible = "infineon,slb9645tt"; > > + reg = <0x20>; > > + powered-while-suspended; > > + }; > > +}; > > + > > +&i2c3 { > > + clock-frequency = <400000>; > > + status = "okay"; > > + > > + touchscreen: touchscreen@10 { > > + compatible = "elan,ekth3500"; > > + reg = <0x10>; > > + interrupt-parent = <&pio>; > > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > > + }; > > +}; > > + > > +&i2c4 { > > + clock-frequency = <400000>; > > + status = "okay"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&trackpad_irq>; > > Why not move the pinctrl properties into the trackpad node? > As second source trackpad device and original device shares same compatible string (rev id), we need to add 2nd trackpad node here. According to previous log (since I don't have a second source trackpad device to test), adding pinctrl in each trackpad node, there would be error: [ 0.643501] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin URXD3 already requested by 7-0015; cannot claim for 7-002c [ 0.643525] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin-117 (7-002c) status -22 [ 0.643548] mediatek-mt8173-pinctrl 1000b000.pinctrl: could not request pin 117 (URXD3) from group URXD3 on device 1000b000.pinctrl [ 0.643568] i2c_hid 7-002c: Error applying setting, reverse things back [ 0.643867] i2c 7-002c: Driver i2c_hid requests probe deferral > > + > > + trackpad: trackpad@15 { > > + compatible = "elan,ekth3000"; > > + interrupt-parent = <&pio>; > > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > > + reg = <0x15>; > > + vcc-supply = <&mt6397_vgp6_reg>; > > + wakeup-source; > > + }; > > +}; > > + > > +&mipi_tx0 { > > + status = "okay"; > > +}; > > + > > +&mmc0 { > > + status = "okay"; > > + pinctrl-names = "default", "state_uhs"; > > + pinctrl-0 = <&mmc0_pins_default>; > > + pinctrl-1 = <&mmc0_pins_uhs>; > > + bus-width = <8>; > > + max-frequency = <200000000>; > > + cap-mmc-highspeed; > > + mmc-hs200-1_8v; > > + mmc-hs400-1_8v; > > + cap-mmc-hw-reset; > > + hs400-ds-delay = <0x14015>; > > + mediatek,hs200-cmd-int-delay=<30>; > > + mediatek,hs400-cmd-int-delay=<14>; > > + mediatek,hs400-cmd-resp-sel-rising; > > + vmmc-supply = <&mt6397_vemc_3v3_reg>; > > + vqmmc-supply = <&mt6397_vio18_reg>; > > + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; > > + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; > > + non-removable; > > +}; > > + > > +&mmc1 { > > + status = "okay"; > > + pinctrl-names = "default", "state_uhs"; > > + pinctrl-0 = <&mmc1_pins_default>; > > + pinctrl-1 = <&mmc1_pins_uhs>; > > + bus-width = <4>; > > + max-frequency = <200000000>; > > + cap-sd-highspeed; > > + sd-uhs-sdr50; > > + sd-uhs-sdr104; > > + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; > > + vmmc-supply = <&mt6397_vmch_reg>; > > + vqmmc-supply = <&mt6397_vmc_reg>; > > +}; > > + > > +&mmc3 { > > + status = "okay"; > > + pinctrl-names = "default", "state_uhs"; > > + pinctrl-0 = <&mmc3_pins_default>; > > + pinctrl-1 = <&mmc3_pins_uhs>; > > + bus-width = <4>; > > + max-frequency = <200000000>; > > + cap-sd-highspeed; > > + sd-uhs-sdr50; > > + sd-uhs-sdr104; > > + sdr104-clk-delay = <5>; > > Not an upstream property, please delete it. > > > + keep-power-in-suspend; > > + enable-sdio-wakeup; > > + cap-sdio-irq; > > + vmmc-supply = <&sdio_fixed_3v3>; > > + vqmmc-supply = <&mt6397_vgp3_reg>; > > + non-removable; > > + cap-power-off-card; > > + > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + btmrvl: btmrvl@2 { > > + compatible = "marvell,sd8897-bt"; > > + reg = <2>; > > + interrupt-parent = <&pio>; > > + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; > > + marvell,wakeup-pin = /bits/ 16 <0x0d>; > > + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; > > + }; > > + > > + mwifiex: mwifiex@1 { > > + compatible = "marvell,sd8897"; > > + reg = <1>; > > + interrupt-parent = <&pio>; > > + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; > > + marvell,wakeup-pin = <3>; > > + marvell,caldata_ed_mac = /bits/ 8 < > > +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > > +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > > + >; > > Not an upstream property, please delete. > > > + }; > > +}; > > + > > +&nor_flash { > > + status = "okay"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&nor_gpio1_pins>; > > + bus-width = <8>; > > + max-frequency = <50000000>; > > + non-removable; > > + flash@0 { > > + compatible = "jedec,spi-nor"; > > + reg = <0>; > > + }; > > +}; > > + > > +&pio { > > + aud_i2s2: aud_i2s2 { > > + pins1 { > > + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, > > + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, > > + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, > > + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, > > + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, > > + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, > > + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; > > + bias-pull-down; > > + }; > > + }; > > + > > + bl_fixed_pins: bl_fixed_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; > > + output-low; > > + }; > > + }; > > + > > + bt_wake_pins: bt_wake_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; > > + bias-pull-up; > > + }; > > + }; > > + > > + disp_pwm0_pins: disp_pwm0_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; > > + output-low; > > + }; > > + }; > > + > > + gpio_keys_pins: gpio_keys_pins { > > + volume_pins { > > + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, > > + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; > > + bias-pull-up; > > + }; > > + > > + tablet_mode_pins { > > + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; > > + bias-pull-up; > > + }; > > + }; > > + > > + hdmi_mux_pins: hdmi_mux_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; > > + }; > > + }; > > + > > + mmc0_pins_default: mmc0default { > > + pins_cmd_dat { > > + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > > + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > > + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > > + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > > + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > > + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > > + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > > + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > > + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > > + bias-pull-up; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > > + bias-pull-down; > > identation. > > > + }; > > + > > + pins_rst { > > + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > > + bias-pull-up; > > + }; > > + }; > > + > > + mmc1_pins_default: mmc1default { > > + pins_cmd_dat { > > + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > > + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > > + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > > + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > > + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_4mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > > + bias-pull-down; > > + drive-strength = <MTK_DRIVE_4mA>; > > + }; > > + > > + pins_insert { > > + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; > > + bias-pull-up; > > + }; > > + }; > > + > > + mmc3_pins_default: mmc3default { > > + pins_dat { > > + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > > + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > > + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > > + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_cmd { > > + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > > + bias-pull-down; > > + drive-strength = <MTK_DRIVE_8mA>; > > + }; > > + > > + pins_pdn { > > + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; > > + output-low; > > + }; > > + }; > > + > > + mmc0_pins_uhs: mmc0 { > > + pins_cmd_dat { > > + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > > + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > > + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > > + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > > + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > > + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > > + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > > + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > > + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_6mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > > + drive-strength = <MTK_DRIVE_6mA>; > > + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > > + }; > > + > > + pins_ds { > > + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; > > + drive-strength = <MTK_DRIVE_10mA>; > > + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > > + }; > > + > > + pins_rst { > > + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > > + bias-pull-up; > > + }; > > + }; > > + > > + mmc1_pins_uhs: mmc1 { > > + pins_cmd_dat { > > + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > > + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > > + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > > + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > > + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_6mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + }; > > + > > + mmc3_pins_uhs: mmc3 { > > + pins_dat { > > + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > > + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > > + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > > + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_cmd { > > + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + }; > > + > > + nor_gpio1_pins: nor { > > + pins1 { > > + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, > > + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, > > + <MT8173_PIN_8_EINT8__FUNC_SFIN>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_4mA>; > > + bias-pull-up; > > + }; > > + > > + pins2 { > > + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; > > + drive-strength = <MTK_DRIVE_4mA>; > > + bias-pull-up; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_4mA>; > > + bias-pull-up; > > + }; > > + }; > > + > > + panel_fixed_pins: panel_fixed_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; > > + }; > > + }; > > + > > + ps8640_pins: ps8640_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, > > + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, > > + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; > > + }; > > + }; > > + > > + ps8640_fixed_pins: ps8640_fixed_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; > > + }; > > + }; > > + > > + rt5650_irq: rt5650_irq { > > + pins1 { > > + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; > > + bias-pull-down; > > + }; > > + }; > > + > > + spi_pins_a: spi1 { > > + pins1 { > > + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; > > + bias-pull-up; > > + }; > > + > > + pins_spi { > > + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, > > + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, > > + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, > > + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; > > + bias-disable; > > + }; > > + }; > > + > > + trackpad_irq: trackpad_irq { > > + pins1 { > > + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; > > + input-enable; > > + bias-pull-up; > > + }; > > + }; > > + > > + usb_pins: usb@0 { > > + pins1 { > > + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; > > + output-high; > > + bias-disable; > > + }; > > + }; > > + > > + wifi_wake_pins: wifi_wake_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; > > + bias-pull-up; > > + }; > > + }; > > +}; > > + > > +&pwm0 { > > + status = "okay"; > > +}; > > + > > +&pwrap { > > + pmic: mt6397 { > > + compatible = "mediatek,mt6397"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + interrupt-parent = <&pio>; > > + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + > > + mt6397rtc: mt6397rtc { > > AFAIK this should be > rtc: mt6397rtc { > > Please fix that for all subnodes. > Will fix in next version > > + compatible = "mediatek,mt6397-rtc"; > > + }; > > + > > + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { > > + compatible = "mediatek,mt6397-pctl-pmic-syscfg", > > + "syscon"; > > + reg = <0 0x0000c000 0 0x0108>; > > not an upstream compatible, please delete the node. > > > + }; > > + > > + pio6397: pinctrl@c000 { > > + compatible = "mediatek,mt6397-pinctrl"; > > + pins-are-numbered; > > + gpio-controller; > > + #gpio-cells = <2>; > > + }; > > + > > + mt6397clock: mt6397clock { > > + compatible = "mediatek,mt6397-clk"; > > + #clock-cells = <1>; > > + }; > > + > > + mt6397regulator: mt6397regulator { > > + compatible = "mediatek,mt6397-regulator"; > > + > > + mt6397_vpca15_reg: buck_vpca15 { > > + regulator-compatible = "buck_vpca15"; > > + regulator-name = "vpca15"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + regulator-allowed-modes = <0 1>; > > + }; > > + > > + mt6397_vpca7_reg: buck_vpca7 { > > + regulator-compatible = "buck_vpca7"; > > + regulator-name = "vpca7"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-enable-ramp-delay = <115>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vsramca15_reg: buck_vsramca15 { > > + regulator-compatible = "buck_vsramca15"; > > + regulator-name = "vsramca15"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vsramca7_reg: buck_vsramca7 { > > + regulator-compatible = "buck_vsramca7"; > > + regulator-name = "vsramca7"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vcore_reg: buck_vcore { > > + regulator-compatible = "buck_vcore"; > > + regulator-name = "vcore"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vgpu_reg: buck_vgpu { > > + regulator-compatible = "buck_vgpu"; > > + regulator-name = "vgpu"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-enable-ramp-delay = <115>; > > + }; > > + > > + mt6397_vdrm_reg: buck_vdrm { > > + regulator-compatible = "buck_vdrm"; > > + regulator-name = "vdrm"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <1400000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vio18_reg: buck_vio18 { > > + regulator-compatible = "buck_vio18"; > > + regulator-name = "vio18"; > > + regulator-min-microvolt = <1620000>; > > + regulator-max-microvolt = <1980000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vtcxo_reg: ldo_vtcxo { > > + regulator-compatible = "ldo_vtcxo"; > > + regulator-name = "vtcxo"; > > + regulator-always-on; > > + }; > > + > > + mt6397_va28_reg: ldo_va28 { > > + regulator-compatible = "ldo_va28"; > > + regulator-name = "va28"; > > + }; > > + > > + mt6397_vcama_reg: ldo_vcama { > > + regulator-compatible = "ldo_vcama"; > > + regulator-name = "vcama"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vio28_reg: ldo_vio28 { > > + regulator-compatible = "ldo_vio28"; > > + regulator-name = "vio28"; > > + regulator-always-on; > > + }; > > + > > + mt6397_vusb_reg: ldo_vusb { > > + regulator-compatible = "ldo_vusb"; > > + regulator-name = "vusb"; > > + }; > > + > > + mt6397_vmc_reg: ldo_vmc { > > + regulator-compatible = "ldo_vmc"; > > + regulator-name = "vmc"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vmch_reg: ldo_vmch { > > + regulator-compatible = "ldo_vmch"; > > + regulator-name = "vmch"; > > + regulator-min-microvolt = <3000000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vemc_3v3_reg: ldo_vemc3v3 { > > + regulator-compatible = "ldo_vemc3v3"; > > + regulator-name = "vemc_3v3"; > > + regulator-min-microvolt = <3000000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vgp1_reg: ldo_vgp1 { > > + regulator-compatible = "ldo_vgp1"; > > + regulator-name = "vcamd"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-enable-ramp-delay = <240>; > > + }; > > + > > + mt6397_vgp2_reg: ldo_vgp2 { > > + regulator-compatible = "ldo_vgp2"; > > + regulator-name = "vcamio"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vgp3_reg: ldo_vgp3 { > > + regulator-compatible = "ldo_vgp3"; > > + regulator-name = "vcamaf"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vgp4_reg: ldo_vgp4 { > > + regulator-compatible = "ldo_vgp4"; > > + regulator-name = "vgp4"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vgp5_reg: ldo_vgp5 { > > + regulator-compatible = "ldo_vgp5"; > > + regulator-name = "vgp5"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <3000000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vgp6_reg: ldo_vgp6 { > > + regulator-compatible = "ldo_vgp6"; > > + regulator-name = "vgp6"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vibr_reg: ldo_vibr { > > + regulator-compatible = "ldo_vibr"; > > + regulator-name = "vibr"; > > + regulator-min-microvolt = <1300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + }; > > + }; > > +}; > > + > > +&spi { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&spi_pins_a>; > > + mediatek,pad-select = <1>; > > + status = "okay"; > > + /* clients */ > > + cros_ec: ec@0 { > > + compatible = "google,cros-ec-spi"; > > + reg = <0x0>; > > + spi-max-frequency = <12000000>; > > + interrupt-parent = <&pio>; > > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > > + google,cros-ec-spi-msg-delay = <500>; > > + > > + i2c_tunnel: i2c-tunnel@0 { > > + compatible = "google,cros-ec-i2c-tunnel"; > > + google,remote-bus = <0>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + battery: sbs-battery@b { > > + compatible = "sbs,sbs-battery"; > > + reg = <0xb>; > > + sbs,i2c-retry-count = <2>; > > + sbs,poll-retry-count = <1>; > > + }; > > + }; > > + }; > > +}; > > + > > +&thermal { > > + bank0-supply = <&mt6397_vpca15_reg>; > > + bank1-supply = <&da9211_vcpu_reg>; > > +}; > > + > > +&uart0 { > > + status = "okay"; > > +}; > > + > > +&ssusb { > > + dr_mode = "host"; > > + wakeup-source; > > + vusb33-supply = <&mt6397_vusb_reg>; > > + status = "okay"; > > +}; > > + > > +&usb_host { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&usb_pins>; > > + vusb33-supply = <&mt6397_vusb_reg>; > > + status = "okay"; > > +}; > > + > > +#include "../../../../arm/boot/dts/cros-ec-keyboard.dtsi" > Why don't we use > #include <arm/cros-ec-keyboard.dtsi> ? > Will fix in next version > > \ No newline at end of file > > > > As Yingjoe already mentioned, please add a newline :) > > Regards, > Matthias ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board @ 2020-01-13 18:01 ` Hsin-Yi Wang 0 siblings, 0 replies; 42+ messages in thread From: Hsin-Yi Wang @ 2020-01-13 18:01 UTC (permalink / raw) To: Matthias Brugger Cc: Mark Rutland, Devicetree List, Nicolas Boichat, lkml, Daniel Kurtz, Rob Herring, linux-mediatek, Enric Balletbo i Serra, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Fri, Jan 10, 2020 at 9:42 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: > > Thanks, I will address the comments and send next version > > On 10/01/2020 08:37, Hsin-Yi Wang wrote: > > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > > SoC. > > > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > > --- > > Changes in v2: > > - remove downstream nodes and unused nodes > > - use GPIO_ACTIVE_LOW for ps8640 gpios > > - move trackpad to hana > > --- > > arch/arm64/boot/dts/mediatek/Makefile | 3 + > > .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > > .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > > .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > > arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > > arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > > 6 files changed, 1161 insertions(+) > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > > index 458bbc422a94..b45a45a565a1 100644 > > --- a/arch/arm64/boot/dts/mediatek/Makefile > > +++ b/arch/arm64/boot/dts/mediatek/Makefile > > @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > > new file mode 100644 > > index 000000000000..a3616bc3d859 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > > @@ -0,0 +1,27 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2019 MediaTek Inc. > > + */ > > + > > +/dts-v1/; > > +#include "mt8173-elm-hana.dtsi" > > + > > +/ { > > + model = "Mediatek Hana rev7 board"; > > + compatible = "google,hana-rev7", "mediatek,mt8173"; > > +}; > > + > > +&cpu_thermal { > > + trips { > > + cpu_crit: cpu_crit@0 { > > + temperature = <100000>; > > + type = "critical"; > > + }; > > + }; > > +}; > > + > > +&gpio_keys { > > + /delete-node/tablet_mode; > > + /delete-node/volume_down; > > + /delete-node/volume_up; > > +}; > > \ No newline at end of file > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > > new file mode 100644 > > index 000000000000..8cbcc75192e3 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > > @@ -0,0 +1,16 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2016 MediaTek Inc. > > + */ > > + > > +/dts-v1/; > > +#include "mt8173-elm-hana.dtsi" > > + > > +/ { > > + model = "Mediatek Hana rev0 board"; > > + compatible = "google,hana-rev6", > > + "google,hana-rev5", "google,hana-rev4", > > + "google,hana-rev3", "google,hana-rev2", > > + "google,hana-rev1", "google,hana-rev0", > > + "google,hana", "mediatek,mt8173"; > > +}; > > I'm a bit confused about all this versions. Do you want to keep them for > internal use, as I suppose only rev6 is available to the general public, > correct? I'm fine with keeping the old revisions if that's of use for you, > otherwise I'd prefer to delete them. According to internal feedback system, at least rev3, rev6, rev7 are in general public. I can delete rev0~rev2, since they are earlier version device. > > Model name could be more verbose. > > > \ No newline at end of file > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > > new file mode 100644 > > index 000000000000..35e12b290947 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > > @@ -0,0 +1,60 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2016 MediaTek Inc. > > + */ > > + > > +#include "mt8173-elm.dtsi" > > + > > +&i2c0 { > > + clock-frequency = <200000>; > > +}; > > + > > +&i2c3 { > > + touchscreen2: touchscreen@34 { > > + compatible = "melfas,mip4_ts"; > > + reg = <0x34>; > > + interrupt-parent = <&pio>; > > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > > + }; > > + > > + touchscreen3: touchscreen@20 { > > + compatible = "hid-over-i2c"; > > + reg = <0x20>; > > + hid-descr-addr = <0x0020>; > > + interrupt-parent = <&pio>; > > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > > + }; > > In v1 you mentioned: > "Partners wants to increase touchpad and touchscreen source (they choose > synaptics) for hana 300e, and synaptics uses hid-over-i2c driver." > > So the partner uses the same compatible (google,hana-rev6?) for both devices? > Confirmed with others, second source devices share same compatible. > > +}; > > + > > +&i2c4 { > > + trackpad2: trackpad@2c { > > + compatible = "hid-over-i2c"; > > + interrupt-parent = <&pio>; > > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > > + reg = <0x2c>; > > + hid-descr-addr = <0x0020>; > > + wakeup-source; > > + }; > > +}; > > + > > +&mmc1 { > > + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; > > +}; > > + > > +&pio { > > + hdmi_mux_pins: hdmi_mux_pins { > > + pins2 { > > + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; > > + bias-pull-up; > > + output-high; > > + }; > > + }; > > + > > + mmc1_pins_default: mmc1default { > > + pins_wp { > > + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; > > + input-enable; > > + bias-pull-up; > > + }; > > + }; > > +}; > > \ No newline at end of file > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > > new file mode 100644 > > index 000000000000..e5da2355760e > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > > @@ -0,0 +1,15 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2016 MediaTek Inc. > > + */ > > + > > +/dts-v1/; > > +#include "mt8173-elm.dtsi" > > + > > +/ { > > + model = "Mediatek Elm board"; > > + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", > > + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", > > + "google,elm-rev2", "google,elm-rev1", > > + "google,elm", "mediatek,mt8173"; > > +}; > > \ No newline at end of file > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > new file mode 100644 > > index 000000000000..2ac738bebe04 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > @@ -0,0 +1,1040 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2016 MediaTek Inc. > > + */ > > + > > +#include <dt-bindings/input/input.h> > > +#include <dt-bindings/gpio/gpio.h> > > +#include "mt8173.dtsi" > > + > > +/ { > > + aliases { > > + serial0 = &uart0; > > + serial1 = &uart1; > > + serial2 = &uart2; > > + serial3 = &uart3; > > + }; > > + > > + memory@40000000 { > > + device_type = "memory"; > > + reg = <0 0x40000000 0 0x80000000>; > > + }; > > + > > + backlight_lcd: backlight_lcd { > > + compatible = "pwm-backlight"; > > + pwms = <&pwm0 0 1000000>; > > + brightness-levels = < > > + 0 16 32 48 64 80 96 112 > > + 128 144 160 176 192 208 224 240 > > + 255 > > + >; > > + default-brightness-level = <9>; > > + power-supply = <&bl_fixed_reg>; > > + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; > > + > > + pinctrl-names = "default"; > > + pinctrl-0 = <&disp_pwm0_pins>; > > + status = "okay"; > > + }; > > + > > + bl_fixed_reg: fixedregulator@2 { > > + compatible = "regulator-fixed"; > > + regulator-name = "bl_fixed"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + startup-delay-us = <1000>; > > + enable-active-high; > > + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&bl_fixed_pins>; > > + }; > > + > > + chosen { > > + stdout-path = &uart0; > > + }; > > + > > + gpio_keys: gpio-keys { > > + compatible = "gpio-keys"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&gpio_keys_pins>; > > + > > + lid { > > + label = "Lid"; > > + gpios = <&pio 69 GPIO_ACTIVE_LOW>; > > + linux,code = <0>; /* SW_LID */ > > + linux,input-type = <5>; /* EV_SW */ > > + gpio-key,wakeup; > > + }; > > + > > + power { > > + label = "Power"; > > + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; > > + linux,code = <KEY_POWER>; > > + debounce-interval = <30>; > > + gpio-key,wakeup; > > + }; > > + > > + tablet_mode { > > + label = "Tablet_mode"; > > + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; > > + linux,code = <1>; /* SW_TABLET_MODE */ > > can't we use SW_TABLET_MODE fomr linux-event-codes.h? > Will fix this. > > + linux,input-type = <5>; /* EV_SW */ > > same here. > > > + gpio-key,wakeup; > > + }; > > + > > + volume_down { > > + label = "Volume_down"; > > + gpios = <&pio 123 GPIO_ACTIVE_LOW>; > > + linux,code = <KEY_VOLUMEDOWN>; > > + }; > > + > > + volume_up { > > + label = "Volume_up"; > > + gpios = <&pio 124 GPIO_ACTIVE_LOW>; > > + linux,code = <KEY_VOLUMEUP>; > > + }; > > + }; > > + > > + panel: panel { > > + compatible = "lg,lp120up1"; > > + power-supply = <&panel_fixed_3v3>; > > + ddc-i2c-bus = <&i2c0>; > > + backlight = <&backlight_lcd>; > > + > > + port { > > + panel_in: endpoint { > > + remote-endpoint = <&ps8640_out>; > > + }; > > + }; > > + }; > > + > > + panel_fixed_3v3: regulator@1 { > > + compatible = "regulator-fixed"; > > + regulator-name = "PANEL_3V3"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + enable-active-high; > > + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&panel_fixed_pins>; > > + }; > > + > > + ps8640_fixed_1v2: regulator@2 { > > + compatible = "regulator-fixed"; > > + regulator-name = "PS8640_1V2"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <1200000>; > > + regulator-enable-ramp-delay = <2000>; > > + enable-active-high; > > + regulator-boot-on; > > + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&ps8640_fixed_pins>; > > + }; > > + > > + sdio_fixed_3v3: fixedregulator@0 { > > + compatible = "regulator-fixed"; > > + regulator-name = "3V3"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; > > we don't need to set the pincontroller mux here? > Will double check on schematic and add it. > > + }; > > + > > + sound: sound { > > + compatible = "mediatek,mt8173-rt5650"; > > + mediatek,audio-codec = <&rt5650 &hdmi0>; > > + mediatek,platform = <&afe>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&aud_i2s2>; > > + > > + mediatek,mclk = <1>; > > + codec-capture { > > + sound-dai = <&rt5650 1>; > > + }; > > + }; > > + > > + hdmicon: connector { > > + compatible = "hdmi-connector"; > > + label = "hdmi"; > > + type = "a"; > > + ddc-i2c-bus = <&hdmiddc0>; > > + > > + port { > > + hdmi_connector_in: endpoint { > > + remote-endpoint = <&hdmi0_out>; > > + }; > > + }; > > + }; > > +}; > > + > > +&cec { > > + status = "okay"; > > +}; > > + > > +&cpu0 { > > + proc-supply = <&mt6397_vpca15_reg>; > > +}; > > + > > +&cpu1 { > > + proc-supply = <&mt6397_vpca15_reg>; > > +}; > > + > > +&cpu2 { > > + proc-supply = <&da9211_vcpu_reg>; > > + sram-supply = <&mt6397_vsramca7_reg>; > > +}; > > + > > +&cpu3 { > > + proc-supply = <&da9211_vcpu_reg>; > > + sram-supply = <&mt6397_vsramca7_reg>; > > +}; > > + > > +&cpu_thermal { > > + sustainable-power = <4500>; /* milliwatts */ > > + trips { > > + threshold: trip-point@0 { > > + temperature = <60000>; > > + }; > > + > > + target: trip-point@1 { > > + temperature = <65000>; > > + }; > > + }; > > +}; > > + > > +&dsi0 { > > + status = "okay"; > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@1 { > > + dsi0_out: endpoint { > > + remote-endpoint = <&ps8640_in>; > > + }; > > + }; > > + }; > > +}; > > + > > +&dpi0 { > > + status = "okay"; > > +}; > > + > > +&hdmi0 { > > + status = "okay"; > > + ports { > > + port@1 { > > + reg = <1>; > > + > > + hdmi0_out: endpoint { > > + remote-endpoint = <&hdmi_connector_in>; > > + }; > > + }; > > + }; > > +}; > > + > > +&hdmi_phy { > > + status = "okay"; > > + mediatek,ibias = <0xc>; > > +}; > > + > > +&i2c0 { > > + status = "okay"; > > + > > + rt5650: audio-codec@1a { > > + compatible = "realtek,rt5650"; > > + reg = <0x1a>; > > + avdd-supply = <&mt6397_vgp1_reg>; > > + cpvdd-supply = <&mt6397_vcama_reg>; > > Hm, only defined for "realtek,rt5663", I suppose that's an inconsistency in the > binding documentation. Can you please double check? > This one? https://github.com/torvalds/linux/blob/master/sound/soc/codecs/rt5645.c#L3582 > > + interrupt-parent = <&pio>; > > + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&rt5650_irq>; > > + #sound-dai-cells = <1>; > > + realtek,dmic1-data-pin = <2>; > > + realtek,jd-mode = <2>; > > + }; > > + > > + ps8640: edp-bridge@8 { > > + compatible = "parade,ps8640"; > > + reg = <0x8>; > > + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; > > + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&ps8640_pins>; > > + vdd12-supply = <&ps8640_fixed_1v2>; > > + vdd33-supply = <&mt6397_vgp2_reg>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + > > + ps8640_in: endpoint { > > + remote-endpoint = <&dsi0_out>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + > > + ps8640_out: endpoint { > > + remote-endpoint = <&panel_in>; > > + }; > > + }; > > + }; > > + }; > > +}; > > + > > +&i2c1 { > > + clock-frequency = <1500000>; > > + status = "okay"; > > + > > + da9211: da9211@68 { > > + compatible = "dlg,da9211"; > > + reg = <0x68>; > > + > > no interrupts? binding description have this stated as required. what happens > when the device raises an interrupt? Will double check on schematic and add it. > > > + regulators { > > + da9211_vcpu_reg: BUCKA { > > + regulator-name = "VBUCKA"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1310000>; > > + regulator-min-microamp = <2000000>; > > + regulator-max-microamp = <4400000>; > > + regulator-ramp-delay = <10000>; > > + regulator-always-on; > > + regulator-allowed-modes = <0 1>; > > + }; > > + > > + da9211_vgpu_reg: BUCKB { > > + regulator-name = "VBUCKB"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1310000>; > > + regulator-min-microamp = <2000000>; > > + regulator-max-microamp = <3000000>; > > + regulator-ramp-delay = <10000>; > > + }; > > + }; > > + }; > > +}; > > + > > +&i2c2 { > > + status = "okay"; > > + > > + tpm: tpm@20 { > > + compatible = "infineon,slb9645tt"; > > + reg = <0x20>; > > + powered-while-suspended; > > + }; > > +}; > > + > > +&i2c3 { > > + clock-frequency = <400000>; > > + status = "okay"; > > + > > + touchscreen: touchscreen@10 { > > + compatible = "elan,ekth3500"; > > + reg = <0x10>; > > + interrupt-parent = <&pio>; > > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > > + }; > > +}; > > + > > +&i2c4 { > > + clock-frequency = <400000>; > > + status = "okay"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&trackpad_irq>; > > Why not move the pinctrl properties into the trackpad node? > As second source trackpad device and original device shares same compatible string (rev id), we need to add 2nd trackpad node here. According to previous log (since I don't have a second source trackpad device to test), adding pinctrl in each trackpad node, there would be error: [ 0.643501] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin URXD3 already requested by 7-0015; cannot claim for 7-002c [ 0.643525] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin-117 (7-002c) status -22 [ 0.643548] mediatek-mt8173-pinctrl 1000b000.pinctrl: could not request pin 117 (URXD3) from group URXD3 on device 1000b000.pinctrl [ 0.643568] i2c_hid 7-002c: Error applying setting, reverse things back [ 0.643867] i2c 7-002c: Driver i2c_hid requests probe deferral > > + > > + trackpad: trackpad@15 { > > + compatible = "elan,ekth3000"; > > + interrupt-parent = <&pio>; > > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > > + reg = <0x15>; > > + vcc-supply = <&mt6397_vgp6_reg>; > > + wakeup-source; > > + }; > > +}; > > + > > +&mipi_tx0 { > > + status = "okay"; > > +}; > > + > > +&mmc0 { > > + status = "okay"; > > + pinctrl-names = "default", "state_uhs"; > > + pinctrl-0 = <&mmc0_pins_default>; > > + pinctrl-1 = <&mmc0_pins_uhs>; > > + bus-width = <8>; > > + max-frequency = <200000000>; > > + cap-mmc-highspeed; > > + mmc-hs200-1_8v; > > + mmc-hs400-1_8v; > > + cap-mmc-hw-reset; > > + hs400-ds-delay = <0x14015>; > > + mediatek,hs200-cmd-int-delay=<30>; > > + mediatek,hs400-cmd-int-delay=<14>; > > + mediatek,hs400-cmd-resp-sel-rising; > > + vmmc-supply = <&mt6397_vemc_3v3_reg>; > > + vqmmc-supply = <&mt6397_vio18_reg>; > > + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; > > + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; > > + non-removable; > > +}; > > + > > +&mmc1 { > > + status = "okay"; > > + pinctrl-names = "default", "state_uhs"; > > + pinctrl-0 = <&mmc1_pins_default>; > > + pinctrl-1 = <&mmc1_pins_uhs>; > > + bus-width = <4>; > > + max-frequency = <200000000>; > > + cap-sd-highspeed; > > + sd-uhs-sdr50; > > + sd-uhs-sdr104; > > + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; > > + vmmc-supply = <&mt6397_vmch_reg>; > > + vqmmc-supply = <&mt6397_vmc_reg>; > > +}; > > + > > +&mmc3 { > > + status = "okay"; > > + pinctrl-names = "default", "state_uhs"; > > + pinctrl-0 = <&mmc3_pins_default>; > > + pinctrl-1 = <&mmc3_pins_uhs>; > > + bus-width = <4>; > > + max-frequency = <200000000>; > > + cap-sd-highspeed; > > + sd-uhs-sdr50; > > + sd-uhs-sdr104; > > + sdr104-clk-delay = <5>; > > Not an upstream property, please delete it. > > > + keep-power-in-suspend; > > + enable-sdio-wakeup; > > + cap-sdio-irq; > > + vmmc-supply = <&sdio_fixed_3v3>; > > + vqmmc-supply = <&mt6397_vgp3_reg>; > > + non-removable; > > + cap-power-off-card; > > + > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + btmrvl: btmrvl@2 { > > + compatible = "marvell,sd8897-bt"; > > + reg = <2>; > > + interrupt-parent = <&pio>; > > + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; > > + marvell,wakeup-pin = /bits/ 16 <0x0d>; > > + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; > > + }; > > + > > + mwifiex: mwifiex@1 { > > + compatible = "marvell,sd8897"; > > + reg = <1>; > > + interrupt-parent = <&pio>; > > + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; > > + marvell,wakeup-pin = <3>; > > + marvell,caldata_ed_mac = /bits/ 8 < > > +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > > +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > > + >; > > Not an upstream property, please delete. > > > + }; > > +}; > > + > > +&nor_flash { > > + status = "okay"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&nor_gpio1_pins>; > > + bus-width = <8>; > > + max-frequency = <50000000>; > > + non-removable; > > + flash@0 { > > + compatible = "jedec,spi-nor"; > > + reg = <0>; > > + }; > > +}; > > + > > +&pio { > > + aud_i2s2: aud_i2s2 { > > + pins1 { > > + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, > > + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, > > + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, > > + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, > > + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, > > + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, > > + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; > > + bias-pull-down; > > + }; > > + }; > > + > > + bl_fixed_pins: bl_fixed_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; > > + output-low; > > + }; > > + }; > > + > > + bt_wake_pins: bt_wake_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; > > + bias-pull-up; > > + }; > > + }; > > + > > + disp_pwm0_pins: disp_pwm0_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; > > + output-low; > > + }; > > + }; > > + > > + gpio_keys_pins: gpio_keys_pins { > > + volume_pins { > > + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, > > + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; > > + bias-pull-up; > > + }; > > + > > + tablet_mode_pins { > > + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; > > + bias-pull-up; > > + }; > > + }; > > + > > + hdmi_mux_pins: hdmi_mux_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; > > + }; > > + }; > > + > > + mmc0_pins_default: mmc0default { > > + pins_cmd_dat { > > + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > > + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > > + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > > + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > > + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > > + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > > + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > > + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > > + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > > + bias-pull-up; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > > + bias-pull-down; > > identation. > > > + }; > > + > > + pins_rst { > > + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > > + bias-pull-up; > > + }; > > + }; > > + > > + mmc1_pins_default: mmc1default { > > + pins_cmd_dat { > > + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > > + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > > + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > > + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > > + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_4mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > > + bias-pull-down; > > + drive-strength = <MTK_DRIVE_4mA>; > > + }; > > + > > + pins_insert { > > + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; > > + bias-pull-up; > > + }; > > + }; > > + > > + mmc3_pins_default: mmc3default { > > + pins_dat { > > + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > > + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > > + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > > + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_cmd { > > + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > > + bias-pull-down; > > + drive-strength = <MTK_DRIVE_8mA>; > > + }; > > + > > + pins_pdn { > > + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; > > + output-low; > > + }; > > + }; > > + > > + mmc0_pins_uhs: mmc0 { > > + pins_cmd_dat { > > + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > > + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > > + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > > + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > > + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > > + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > > + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > > + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > > + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_6mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > > + drive-strength = <MTK_DRIVE_6mA>; > > + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > > + }; > > + > > + pins_ds { > > + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; > > + drive-strength = <MTK_DRIVE_10mA>; > > + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > > + }; > > + > > + pins_rst { > > + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > > + bias-pull-up; > > + }; > > + }; > > + > > + mmc1_pins_uhs: mmc1 { > > + pins_cmd_dat { > > + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > > + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > > + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > > + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > > + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_6mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + }; > > + > > + mmc3_pins_uhs: mmc3 { > > + pins_dat { > > + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > > + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > > + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > > + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_cmd { > > + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + }; > > + > > + nor_gpio1_pins: nor { > > + pins1 { > > + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, > > + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, > > + <MT8173_PIN_8_EINT8__FUNC_SFIN>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_4mA>; > > + bias-pull-up; > > + }; > > + > > + pins2 { > > + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; > > + drive-strength = <MTK_DRIVE_4mA>; > > + bias-pull-up; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_4mA>; > > + bias-pull-up; > > + }; > > + }; > > + > > + panel_fixed_pins: panel_fixed_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; > > + }; > > + }; > > + > > + ps8640_pins: ps8640_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, > > + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, > > + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; > > + }; > > + }; > > + > > + ps8640_fixed_pins: ps8640_fixed_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; > > + }; > > + }; > > + > > + rt5650_irq: rt5650_irq { > > + pins1 { > > + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; > > + bias-pull-down; > > + }; > > + }; > > + > > + spi_pins_a: spi1 { > > + pins1 { > > + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; > > + bias-pull-up; > > + }; > > + > > + pins_spi { > > + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, > > + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, > > + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, > > + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; > > + bias-disable; > > + }; > > + }; > > + > > + trackpad_irq: trackpad_irq { > > + pins1 { > > + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; > > + input-enable; > > + bias-pull-up; > > + }; > > + }; > > + > > + usb_pins: usb@0 { > > + pins1 { > > + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; > > + output-high; > > + bias-disable; > > + }; > > + }; > > + > > + wifi_wake_pins: wifi_wake_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; > > + bias-pull-up; > > + }; > > + }; > > +}; > > + > > +&pwm0 { > > + status = "okay"; > > +}; > > + > > +&pwrap { > > + pmic: mt6397 { > > + compatible = "mediatek,mt6397"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + interrupt-parent = <&pio>; > > + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + > > + mt6397rtc: mt6397rtc { > > AFAIK this should be > rtc: mt6397rtc { > > Please fix that for all subnodes. > Will fix in next version > > + compatible = "mediatek,mt6397-rtc"; > > + }; > > + > > + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { > > + compatible = "mediatek,mt6397-pctl-pmic-syscfg", > > + "syscon"; > > + reg = <0 0x0000c000 0 0x0108>; > > not an upstream compatible, please delete the node. > > > + }; > > + > > + pio6397: pinctrl@c000 { > > + compatible = "mediatek,mt6397-pinctrl"; > > + pins-are-numbered; > > + gpio-controller; > > + #gpio-cells = <2>; > > + }; > > + > > + mt6397clock: mt6397clock { > > + compatible = "mediatek,mt6397-clk"; > > + #clock-cells = <1>; > > + }; > > + > > + mt6397regulator: mt6397regulator { > > + compatible = "mediatek,mt6397-regulator"; > > + > > + mt6397_vpca15_reg: buck_vpca15 { > > + regulator-compatible = "buck_vpca15"; > > + regulator-name = "vpca15"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + regulator-allowed-modes = <0 1>; > > + }; > > + > > + mt6397_vpca7_reg: buck_vpca7 { > > + regulator-compatible = "buck_vpca7"; > > + regulator-name = "vpca7"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-enable-ramp-delay = <115>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vsramca15_reg: buck_vsramca15 { > > + regulator-compatible = "buck_vsramca15"; > > + regulator-name = "vsramca15"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vsramca7_reg: buck_vsramca7 { > > + regulator-compatible = "buck_vsramca7"; > > + regulator-name = "vsramca7"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vcore_reg: buck_vcore { > > + regulator-compatible = "buck_vcore"; > > + regulator-name = "vcore"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vgpu_reg: buck_vgpu { > > + regulator-compatible = "buck_vgpu"; > > + regulator-name = "vgpu"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-enable-ramp-delay = <115>; > > + }; > > + > > + mt6397_vdrm_reg: buck_vdrm { > > + regulator-compatible = "buck_vdrm"; > > + regulator-name = "vdrm"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <1400000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vio18_reg: buck_vio18 { > > + regulator-compatible = "buck_vio18"; > > + regulator-name = "vio18"; > > + regulator-min-microvolt = <1620000>; > > + regulator-max-microvolt = <1980000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vtcxo_reg: ldo_vtcxo { > > + regulator-compatible = "ldo_vtcxo"; > > + regulator-name = "vtcxo"; > > + regulator-always-on; > > + }; > > + > > + mt6397_va28_reg: ldo_va28 { > > + regulator-compatible = "ldo_va28"; > > + regulator-name = "va28"; > > + }; > > + > > + mt6397_vcama_reg: ldo_vcama { > > + regulator-compatible = "ldo_vcama"; > > + regulator-name = "vcama"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vio28_reg: ldo_vio28 { > > + regulator-compatible = "ldo_vio28"; > > + regulator-name = "vio28"; > > + regulator-always-on; > > + }; > > + > > + mt6397_vusb_reg: ldo_vusb { > > + regulator-compatible = "ldo_vusb"; > > + regulator-name = "vusb"; > > + }; > > + > > + mt6397_vmc_reg: ldo_vmc { > > + regulator-compatible = "ldo_vmc"; > > + regulator-name = "vmc"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vmch_reg: ldo_vmch { > > + regulator-compatible = "ldo_vmch"; > > + regulator-name = "vmch"; > > + regulator-min-microvolt = <3000000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vemc_3v3_reg: ldo_vemc3v3 { > > + regulator-compatible = "ldo_vemc3v3"; > > + regulator-name = "vemc_3v3"; > > + regulator-min-microvolt = <3000000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vgp1_reg: ldo_vgp1 { > > + regulator-compatible = "ldo_vgp1"; > > + regulator-name = "vcamd"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-enable-ramp-delay = <240>; > > + }; > > + > > + mt6397_vgp2_reg: ldo_vgp2 { > > + regulator-compatible = "ldo_vgp2"; > > + regulator-name = "vcamio"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vgp3_reg: ldo_vgp3 { > > + regulator-compatible = "ldo_vgp3"; > > + regulator-name = "vcamaf"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vgp4_reg: ldo_vgp4 { > > + regulator-compatible = "ldo_vgp4"; > > + regulator-name = "vgp4"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vgp5_reg: ldo_vgp5 { > > + regulator-compatible = "ldo_vgp5"; > > + regulator-name = "vgp5"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <3000000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vgp6_reg: ldo_vgp6 { > > + regulator-compatible = "ldo_vgp6"; > > + regulator-name = "vgp6"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vibr_reg: ldo_vibr { > > + regulator-compatible = "ldo_vibr"; > > + regulator-name = "vibr"; > > + regulator-min-microvolt = <1300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + }; > > + }; > > +}; > > + > > +&spi { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&spi_pins_a>; > > + mediatek,pad-select = <1>; > > + status = "okay"; > > + /* clients */ > > + cros_ec: ec@0 { > > + compatible = "google,cros-ec-spi"; > > + reg = <0x0>; > > + spi-max-frequency = <12000000>; > > + interrupt-parent = <&pio>; > > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > > + google,cros-ec-spi-msg-delay = <500>; > > + > > + i2c_tunnel: i2c-tunnel@0 { > > + compatible = "google,cros-ec-i2c-tunnel"; > > + google,remote-bus = <0>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + battery: sbs-battery@b { > > + compatible = "sbs,sbs-battery"; > > + reg = <0xb>; > > + sbs,i2c-retry-count = <2>; > > + sbs,poll-retry-count = <1>; > > + }; > > + }; > > + }; > > +}; > > + > > +&thermal { > > + bank0-supply = <&mt6397_vpca15_reg>; > > + bank1-supply = <&da9211_vcpu_reg>; > > +}; > > + > > +&uart0 { > > + status = "okay"; > > +}; > > + > > +&ssusb { > > + dr_mode = "host"; > > + wakeup-source; > > + vusb33-supply = <&mt6397_vusb_reg>; > > + status = "okay"; > > +}; > > + > > +&usb_host { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&usb_pins>; > > + vusb33-supply = <&mt6397_vusb_reg>; > > + status = "okay"; > > +}; > > + > > +#include "../../../../arm/boot/dts/cros-ec-keyboard.dtsi" > Why don't we use > #include <arm/cros-ec-keyboard.dtsi> ? > Will fix in next version > > \ No newline at end of file > > > > As Yingjoe already mentioned, please add a newline :) > > Regards, > Matthias _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board @ 2020-01-13 18:01 ` Hsin-Yi Wang 0 siblings, 0 replies; 42+ messages in thread From: Hsin-Yi Wang @ 2020-01-13 18:01 UTC (permalink / raw) To: Matthias Brugger Cc: Mark Rutland, Devicetree List, Nicolas Boichat, lkml, Rob Herring, linux-mediatek, Enric Balletbo i Serra, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Fri, Jan 10, 2020 at 9:42 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: > > Thanks, I will address the comments and send next version > > On 10/01/2020 08:37, Hsin-Yi Wang wrote: > > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > > SoC. > > > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > > --- > > Changes in v2: > > - remove downstream nodes and unused nodes > > - use GPIO_ACTIVE_LOW for ps8640 gpios > > - move trackpad to hana > > --- > > arch/arm64/boot/dts/mediatek/Makefile | 3 + > > .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > > .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > > .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > > arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > > arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > > 6 files changed, 1161 insertions(+) > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > > index 458bbc422a94..b45a45a565a1 100644 > > --- a/arch/arm64/boot/dts/mediatek/Makefile > > +++ b/arch/arm64/boot/dts/mediatek/Makefile > > @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > > new file mode 100644 > > index 000000000000..a3616bc3d859 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > > @@ -0,0 +1,27 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2019 MediaTek Inc. > > + */ > > + > > +/dts-v1/; > > +#include "mt8173-elm-hana.dtsi" > > + > > +/ { > > + model = "Mediatek Hana rev7 board"; > > + compatible = "google,hana-rev7", "mediatek,mt8173"; > > +}; > > + > > +&cpu_thermal { > > + trips { > > + cpu_crit: cpu_crit@0 { > > + temperature = <100000>; > > + type = "critical"; > > + }; > > + }; > > +}; > > + > > +&gpio_keys { > > + /delete-node/tablet_mode; > > + /delete-node/volume_down; > > + /delete-node/volume_up; > > +}; > > \ No newline at end of file > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > > new file mode 100644 > > index 000000000000..8cbcc75192e3 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > > @@ -0,0 +1,16 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2016 MediaTek Inc. > > + */ > > + > > +/dts-v1/; > > +#include "mt8173-elm-hana.dtsi" > > + > > +/ { > > + model = "Mediatek Hana rev0 board"; > > + compatible = "google,hana-rev6", > > + "google,hana-rev5", "google,hana-rev4", > > + "google,hana-rev3", "google,hana-rev2", > > + "google,hana-rev1", "google,hana-rev0", > > + "google,hana", "mediatek,mt8173"; > > +}; > > I'm a bit confused about all this versions. Do you want to keep them for > internal use, as I suppose only rev6 is available to the general public, > correct? I'm fine with keeping the old revisions if that's of use for you, > otherwise I'd prefer to delete them. According to internal feedback system, at least rev3, rev6, rev7 are in general public. I can delete rev0~rev2, since they are earlier version device. > > Model name could be more verbose. > > > \ No newline at end of file > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > > new file mode 100644 > > index 000000000000..35e12b290947 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > > @@ -0,0 +1,60 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2016 MediaTek Inc. > > + */ > > + > > +#include "mt8173-elm.dtsi" > > + > > +&i2c0 { > > + clock-frequency = <200000>; > > +}; > > + > > +&i2c3 { > > + touchscreen2: touchscreen@34 { > > + compatible = "melfas,mip4_ts"; > > + reg = <0x34>; > > + interrupt-parent = <&pio>; > > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > > + }; > > + > > + touchscreen3: touchscreen@20 { > > + compatible = "hid-over-i2c"; > > + reg = <0x20>; > > + hid-descr-addr = <0x0020>; > > + interrupt-parent = <&pio>; > > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > > + }; > > In v1 you mentioned: > "Partners wants to increase touchpad and touchscreen source (they choose > synaptics) for hana 300e, and synaptics uses hid-over-i2c driver." > > So the partner uses the same compatible (google,hana-rev6?) for both devices? > Confirmed with others, second source devices share same compatible. > > +}; > > + > > +&i2c4 { > > + trackpad2: trackpad@2c { > > + compatible = "hid-over-i2c"; > > + interrupt-parent = <&pio>; > > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > > + reg = <0x2c>; > > + hid-descr-addr = <0x0020>; > > + wakeup-source; > > + }; > > +}; > > + > > +&mmc1 { > > + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; > > +}; > > + > > +&pio { > > + hdmi_mux_pins: hdmi_mux_pins { > > + pins2 { > > + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; > > + bias-pull-up; > > + output-high; > > + }; > > + }; > > + > > + mmc1_pins_default: mmc1default { > > + pins_wp { > > + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; > > + input-enable; > > + bias-pull-up; > > + }; > > + }; > > +}; > > \ No newline at end of file > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > > new file mode 100644 > > index 000000000000..e5da2355760e > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > > @@ -0,0 +1,15 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2016 MediaTek Inc. > > + */ > > + > > +/dts-v1/; > > +#include "mt8173-elm.dtsi" > > + > > +/ { > > + model = "Mediatek Elm board"; > > + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", > > + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", > > + "google,elm-rev2", "google,elm-rev1", > > + "google,elm", "mediatek,mt8173"; > > +}; > > \ No newline at end of file > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > new file mode 100644 > > index 000000000000..2ac738bebe04 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > @@ -0,0 +1,1040 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2016 MediaTek Inc. > > + */ > > + > > +#include <dt-bindings/input/input.h> > > +#include <dt-bindings/gpio/gpio.h> > > +#include "mt8173.dtsi" > > + > > +/ { > > + aliases { > > + serial0 = &uart0; > > + serial1 = &uart1; > > + serial2 = &uart2; > > + serial3 = &uart3; > > + }; > > + > > + memory@40000000 { > > + device_type = "memory"; > > + reg = <0 0x40000000 0 0x80000000>; > > + }; > > + > > + backlight_lcd: backlight_lcd { > > + compatible = "pwm-backlight"; > > + pwms = <&pwm0 0 1000000>; > > + brightness-levels = < > > + 0 16 32 48 64 80 96 112 > > + 128 144 160 176 192 208 224 240 > > + 255 > > + >; > > + default-brightness-level = <9>; > > + power-supply = <&bl_fixed_reg>; > > + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; > > + > > + pinctrl-names = "default"; > > + pinctrl-0 = <&disp_pwm0_pins>; > > + status = "okay"; > > + }; > > + > > + bl_fixed_reg: fixedregulator@2 { > > + compatible = "regulator-fixed"; > > + regulator-name = "bl_fixed"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + startup-delay-us = <1000>; > > + enable-active-high; > > + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&bl_fixed_pins>; > > + }; > > + > > + chosen { > > + stdout-path = &uart0; > > + }; > > + > > + gpio_keys: gpio-keys { > > + compatible = "gpio-keys"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&gpio_keys_pins>; > > + > > + lid { > > + label = "Lid"; > > + gpios = <&pio 69 GPIO_ACTIVE_LOW>; > > + linux,code = <0>; /* SW_LID */ > > + linux,input-type = <5>; /* EV_SW */ > > + gpio-key,wakeup; > > + }; > > + > > + power { > > + label = "Power"; > > + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; > > + linux,code = <KEY_POWER>; > > + debounce-interval = <30>; > > + gpio-key,wakeup; > > + }; > > + > > + tablet_mode { > > + label = "Tablet_mode"; > > + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; > > + linux,code = <1>; /* SW_TABLET_MODE */ > > can't we use SW_TABLET_MODE fomr linux-event-codes.h? > Will fix this. > > + linux,input-type = <5>; /* EV_SW */ > > same here. > > > + gpio-key,wakeup; > > + }; > > + > > + volume_down { > > + label = "Volume_down"; > > + gpios = <&pio 123 GPIO_ACTIVE_LOW>; > > + linux,code = <KEY_VOLUMEDOWN>; > > + }; > > + > > + volume_up { > > + label = "Volume_up"; > > + gpios = <&pio 124 GPIO_ACTIVE_LOW>; > > + linux,code = <KEY_VOLUMEUP>; > > + }; > > + }; > > + > > + panel: panel { > > + compatible = "lg,lp120up1"; > > + power-supply = <&panel_fixed_3v3>; > > + ddc-i2c-bus = <&i2c0>; > > + backlight = <&backlight_lcd>; > > + > > + port { > > + panel_in: endpoint { > > + remote-endpoint = <&ps8640_out>; > > + }; > > + }; > > + }; > > + > > + panel_fixed_3v3: regulator@1 { > > + compatible = "regulator-fixed"; > > + regulator-name = "PANEL_3V3"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + enable-active-high; > > + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&panel_fixed_pins>; > > + }; > > + > > + ps8640_fixed_1v2: regulator@2 { > > + compatible = "regulator-fixed"; > > + regulator-name = "PS8640_1V2"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <1200000>; > > + regulator-enable-ramp-delay = <2000>; > > + enable-active-high; > > + regulator-boot-on; > > + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&ps8640_fixed_pins>; > > + }; > > + > > + sdio_fixed_3v3: fixedregulator@0 { > > + compatible = "regulator-fixed"; > > + regulator-name = "3V3"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; > > we don't need to set the pincontroller mux here? > Will double check on schematic and add it. > > + }; > > + > > + sound: sound { > > + compatible = "mediatek,mt8173-rt5650"; > > + mediatek,audio-codec = <&rt5650 &hdmi0>; > > + mediatek,platform = <&afe>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&aud_i2s2>; > > + > > + mediatek,mclk = <1>; > > + codec-capture { > > + sound-dai = <&rt5650 1>; > > + }; > > + }; > > + > > + hdmicon: connector { > > + compatible = "hdmi-connector"; > > + label = "hdmi"; > > + type = "a"; > > + ddc-i2c-bus = <&hdmiddc0>; > > + > > + port { > > + hdmi_connector_in: endpoint { > > + remote-endpoint = <&hdmi0_out>; > > + }; > > + }; > > + }; > > +}; > > + > > +&cec { > > + status = "okay"; > > +}; > > + > > +&cpu0 { > > + proc-supply = <&mt6397_vpca15_reg>; > > +}; > > + > > +&cpu1 { > > + proc-supply = <&mt6397_vpca15_reg>; > > +}; > > + > > +&cpu2 { > > + proc-supply = <&da9211_vcpu_reg>; > > + sram-supply = <&mt6397_vsramca7_reg>; > > +}; > > + > > +&cpu3 { > > + proc-supply = <&da9211_vcpu_reg>; > > + sram-supply = <&mt6397_vsramca7_reg>; > > +}; > > + > > +&cpu_thermal { > > + sustainable-power = <4500>; /* milliwatts */ > > + trips { > > + threshold: trip-point@0 { > > + temperature = <60000>; > > + }; > > + > > + target: trip-point@1 { > > + temperature = <65000>; > > + }; > > + }; > > +}; > > + > > +&dsi0 { > > + status = "okay"; > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@1 { > > + dsi0_out: endpoint { > > + remote-endpoint = <&ps8640_in>; > > + }; > > + }; > > + }; > > +}; > > + > > +&dpi0 { > > + status = "okay"; > > +}; > > + > > +&hdmi0 { > > + status = "okay"; > > + ports { > > + port@1 { > > + reg = <1>; > > + > > + hdmi0_out: endpoint { > > + remote-endpoint = <&hdmi_connector_in>; > > + }; > > + }; > > + }; > > +}; > > + > > +&hdmi_phy { > > + status = "okay"; > > + mediatek,ibias = <0xc>; > > +}; > > + > > +&i2c0 { > > + status = "okay"; > > + > > + rt5650: audio-codec@1a { > > + compatible = "realtek,rt5650"; > > + reg = <0x1a>; > > + avdd-supply = <&mt6397_vgp1_reg>; > > + cpvdd-supply = <&mt6397_vcama_reg>; > > Hm, only defined for "realtek,rt5663", I suppose that's an inconsistency in the > binding documentation. Can you please double check? > This one? https://github.com/torvalds/linux/blob/master/sound/soc/codecs/rt5645.c#L3582 > > + interrupt-parent = <&pio>; > > + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&rt5650_irq>; > > + #sound-dai-cells = <1>; > > + realtek,dmic1-data-pin = <2>; > > + realtek,jd-mode = <2>; > > + }; > > + > > + ps8640: edp-bridge@8 { > > + compatible = "parade,ps8640"; > > + reg = <0x8>; > > + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; > > + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&ps8640_pins>; > > + vdd12-supply = <&ps8640_fixed_1v2>; > > + vdd33-supply = <&mt6397_vgp2_reg>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + > > + ps8640_in: endpoint { > > + remote-endpoint = <&dsi0_out>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + > > + ps8640_out: endpoint { > > + remote-endpoint = <&panel_in>; > > + }; > > + }; > > + }; > > + }; > > +}; > > + > > +&i2c1 { > > + clock-frequency = <1500000>; > > + status = "okay"; > > + > > + da9211: da9211@68 { > > + compatible = "dlg,da9211"; > > + reg = <0x68>; > > + > > no interrupts? binding description have this stated as required. what happens > when the device raises an interrupt? Will double check on schematic and add it. > > > + regulators { > > + da9211_vcpu_reg: BUCKA { > > + regulator-name = "VBUCKA"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1310000>; > > + regulator-min-microamp = <2000000>; > > + regulator-max-microamp = <4400000>; > > + regulator-ramp-delay = <10000>; > > + regulator-always-on; > > + regulator-allowed-modes = <0 1>; > > + }; > > + > > + da9211_vgpu_reg: BUCKB { > > + regulator-name = "VBUCKB"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1310000>; > > + regulator-min-microamp = <2000000>; > > + regulator-max-microamp = <3000000>; > > + regulator-ramp-delay = <10000>; > > + }; > > + }; > > + }; > > +}; > > + > > +&i2c2 { > > + status = "okay"; > > + > > + tpm: tpm@20 { > > + compatible = "infineon,slb9645tt"; > > + reg = <0x20>; > > + powered-while-suspended; > > + }; > > +}; > > + > > +&i2c3 { > > + clock-frequency = <400000>; > > + status = "okay"; > > + > > + touchscreen: touchscreen@10 { > > + compatible = "elan,ekth3500"; > > + reg = <0x10>; > > + interrupt-parent = <&pio>; > > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > > + }; > > +}; > > + > > +&i2c4 { > > + clock-frequency = <400000>; > > + status = "okay"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&trackpad_irq>; > > Why not move the pinctrl properties into the trackpad node? > As second source trackpad device and original device shares same compatible string (rev id), we need to add 2nd trackpad node here. According to previous log (since I don't have a second source trackpad device to test), adding pinctrl in each trackpad node, there would be error: [ 0.643501] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin URXD3 already requested by 7-0015; cannot claim for 7-002c [ 0.643525] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin-117 (7-002c) status -22 [ 0.643548] mediatek-mt8173-pinctrl 1000b000.pinctrl: could not request pin 117 (URXD3) from group URXD3 on device 1000b000.pinctrl [ 0.643568] i2c_hid 7-002c: Error applying setting, reverse things back [ 0.643867] i2c 7-002c: Driver i2c_hid requests probe deferral > > + > > + trackpad: trackpad@15 { > > + compatible = "elan,ekth3000"; > > + interrupt-parent = <&pio>; > > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > > + reg = <0x15>; > > + vcc-supply = <&mt6397_vgp6_reg>; > > + wakeup-source; > > + }; > > +}; > > + > > +&mipi_tx0 { > > + status = "okay"; > > +}; > > + > > +&mmc0 { > > + status = "okay"; > > + pinctrl-names = "default", "state_uhs"; > > + pinctrl-0 = <&mmc0_pins_default>; > > + pinctrl-1 = <&mmc0_pins_uhs>; > > + bus-width = <8>; > > + max-frequency = <200000000>; > > + cap-mmc-highspeed; > > + mmc-hs200-1_8v; > > + mmc-hs400-1_8v; > > + cap-mmc-hw-reset; > > + hs400-ds-delay = <0x14015>; > > + mediatek,hs200-cmd-int-delay=<30>; > > + mediatek,hs400-cmd-int-delay=<14>; > > + mediatek,hs400-cmd-resp-sel-rising; > > + vmmc-supply = <&mt6397_vemc_3v3_reg>; > > + vqmmc-supply = <&mt6397_vio18_reg>; > > + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; > > + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; > > + non-removable; > > +}; > > + > > +&mmc1 { > > + status = "okay"; > > + pinctrl-names = "default", "state_uhs"; > > + pinctrl-0 = <&mmc1_pins_default>; > > + pinctrl-1 = <&mmc1_pins_uhs>; > > + bus-width = <4>; > > + max-frequency = <200000000>; > > + cap-sd-highspeed; > > + sd-uhs-sdr50; > > + sd-uhs-sdr104; > > + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; > > + vmmc-supply = <&mt6397_vmch_reg>; > > + vqmmc-supply = <&mt6397_vmc_reg>; > > +}; > > + > > +&mmc3 { > > + status = "okay"; > > + pinctrl-names = "default", "state_uhs"; > > + pinctrl-0 = <&mmc3_pins_default>; > > + pinctrl-1 = <&mmc3_pins_uhs>; > > + bus-width = <4>; > > + max-frequency = <200000000>; > > + cap-sd-highspeed; > > + sd-uhs-sdr50; > > + sd-uhs-sdr104; > > + sdr104-clk-delay = <5>; > > Not an upstream property, please delete it. > > > + keep-power-in-suspend; > > + enable-sdio-wakeup; > > + cap-sdio-irq; > > + vmmc-supply = <&sdio_fixed_3v3>; > > + vqmmc-supply = <&mt6397_vgp3_reg>; > > + non-removable; > > + cap-power-off-card; > > + > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + btmrvl: btmrvl@2 { > > + compatible = "marvell,sd8897-bt"; > > + reg = <2>; > > + interrupt-parent = <&pio>; > > + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; > > + marvell,wakeup-pin = /bits/ 16 <0x0d>; > > + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; > > + }; > > + > > + mwifiex: mwifiex@1 { > > + compatible = "marvell,sd8897"; > > + reg = <1>; > > + interrupt-parent = <&pio>; > > + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; > > + marvell,wakeup-pin = <3>; > > + marvell,caldata_ed_mac = /bits/ 8 < > > +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > > +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > > + >; > > Not an upstream property, please delete. > > > + }; > > +}; > > + > > +&nor_flash { > > + status = "okay"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&nor_gpio1_pins>; > > + bus-width = <8>; > > + max-frequency = <50000000>; > > + non-removable; > > + flash@0 { > > + compatible = "jedec,spi-nor"; > > + reg = <0>; > > + }; > > +}; > > + > > +&pio { > > + aud_i2s2: aud_i2s2 { > > + pins1 { > > + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, > > + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, > > + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, > > + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, > > + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, > > + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, > > + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; > > + bias-pull-down; > > + }; > > + }; > > + > > + bl_fixed_pins: bl_fixed_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; > > + output-low; > > + }; > > + }; > > + > > + bt_wake_pins: bt_wake_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; > > + bias-pull-up; > > + }; > > + }; > > + > > + disp_pwm0_pins: disp_pwm0_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; > > + output-low; > > + }; > > + }; > > + > > + gpio_keys_pins: gpio_keys_pins { > > + volume_pins { > > + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, > > + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; > > + bias-pull-up; > > + }; > > + > > + tablet_mode_pins { > > + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; > > + bias-pull-up; > > + }; > > + }; > > + > > + hdmi_mux_pins: hdmi_mux_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; > > + }; > > + }; > > + > > + mmc0_pins_default: mmc0default { > > + pins_cmd_dat { > > + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > > + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > > + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > > + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > > + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > > + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > > + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > > + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > > + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > > + bias-pull-up; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > > + bias-pull-down; > > identation. > > > + }; > > + > > + pins_rst { > > + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > > + bias-pull-up; > > + }; > > + }; > > + > > + mmc1_pins_default: mmc1default { > > + pins_cmd_dat { > > + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > > + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > > + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > > + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > > + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_4mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > > + bias-pull-down; > > + drive-strength = <MTK_DRIVE_4mA>; > > + }; > > + > > + pins_insert { > > + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; > > + bias-pull-up; > > + }; > > + }; > > + > > + mmc3_pins_default: mmc3default { > > + pins_dat { > > + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > > + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > > + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > > + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_cmd { > > + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > > + bias-pull-down; > > + drive-strength = <MTK_DRIVE_8mA>; > > + }; > > + > > + pins_pdn { > > + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; > > + output-low; > > + }; > > + }; > > + > > + mmc0_pins_uhs: mmc0 { > > + pins_cmd_dat { > > + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > > + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > > + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > > + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > > + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > > + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > > + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > > + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > > + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_6mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > > + drive-strength = <MTK_DRIVE_6mA>; > > + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > > + }; > > + > > + pins_ds { > > + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; > > + drive-strength = <MTK_DRIVE_10mA>; > > + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > > + }; > > + > > + pins_rst { > > + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > > + bias-pull-up; > > + }; > > + }; > > + > > + mmc1_pins_uhs: mmc1 { > > + pins_cmd_dat { > > + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > > + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > > + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > > + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > > + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_6mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + }; > > + > > + mmc3_pins_uhs: mmc3 { > > + pins_dat { > > + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > > + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > > + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > > + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_cmd { > > + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + }; > > + > > + nor_gpio1_pins: nor { > > + pins1 { > > + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, > > + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, > > + <MT8173_PIN_8_EINT8__FUNC_SFIN>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_4mA>; > > + bias-pull-up; > > + }; > > + > > + pins2 { > > + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; > > + drive-strength = <MTK_DRIVE_4mA>; > > + bias-pull-up; > > + }; > > + > > + pins_clk { > > + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_4mA>; > > + bias-pull-up; > > + }; > > + }; > > + > > + panel_fixed_pins: panel_fixed_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; > > + }; > > + }; > > + > > + ps8640_pins: ps8640_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, > > + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, > > + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; > > + }; > > + }; > > + > > + ps8640_fixed_pins: ps8640_fixed_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; > > + }; > > + }; > > + > > + rt5650_irq: rt5650_irq { > > + pins1 { > > + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; > > + bias-pull-down; > > + }; > > + }; > > + > > + spi_pins_a: spi1 { > > + pins1 { > > + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; > > + bias-pull-up; > > + }; > > + > > + pins_spi { > > + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, > > + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, > > + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, > > + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; > > + bias-disable; > > + }; > > + }; > > + > > + trackpad_irq: trackpad_irq { > > + pins1 { > > + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; > > + input-enable; > > + bias-pull-up; > > + }; > > + }; > > + > > + usb_pins: usb@0 { > > + pins1 { > > + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; > > + output-high; > > + bias-disable; > > + }; > > + }; > > + > > + wifi_wake_pins: wifi_wake_pins { > > + pins1 { > > + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; > > + bias-pull-up; > > + }; > > + }; > > +}; > > + > > +&pwm0 { > > + status = "okay"; > > +}; > > + > > +&pwrap { > > + pmic: mt6397 { > > + compatible = "mediatek,mt6397"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + interrupt-parent = <&pio>; > > + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + > > + mt6397rtc: mt6397rtc { > > AFAIK this should be > rtc: mt6397rtc { > > Please fix that for all subnodes. > Will fix in next version > > + compatible = "mediatek,mt6397-rtc"; > > + }; > > + > > + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { > > + compatible = "mediatek,mt6397-pctl-pmic-syscfg", > > + "syscon"; > > + reg = <0 0x0000c000 0 0x0108>; > > not an upstream compatible, please delete the node. > > > + }; > > + > > + pio6397: pinctrl@c000 { > > + compatible = "mediatek,mt6397-pinctrl"; > > + pins-are-numbered; > > + gpio-controller; > > + #gpio-cells = <2>; > > + }; > > + > > + mt6397clock: mt6397clock { > > + compatible = "mediatek,mt6397-clk"; > > + #clock-cells = <1>; > > + }; > > + > > + mt6397regulator: mt6397regulator { > > + compatible = "mediatek,mt6397-regulator"; > > + > > + mt6397_vpca15_reg: buck_vpca15 { > > + regulator-compatible = "buck_vpca15"; > > + regulator-name = "vpca15"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + regulator-allowed-modes = <0 1>; > > + }; > > + > > + mt6397_vpca7_reg: buck_vpca7 { > > + regulator-compatible = "buck_vpca7"; > > + regulator-name = "vpca7"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-enable-ramp-delay = <115>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vsramca15_reg: buck_vsramca15 { > > + regulator-compatible = "buck_vsramca15"; > > + regulator-name = "vsramca15"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vsramca7_reg: buck_vsramca7 { > > + regulator-compatible = "buck_vsramca7"; > > + regulator-name = "vsramca7"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vcore_reg: buck_vcore { > > + regulator-compatible = "buck_vcore"; > > + regulator-name = "vcore"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vgpu_reg: buck_vgpu { > > + regulator-compatible = "buck_vgpu"; > > + regulator-name = "vgpu"; > > + regulator-min-microvolt = < 700000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <12500>; > > + regulator-enable-ramp-delay = <115>; > > + }; > > + > > + mt6397_vdrm_reg: buck_vdrm { > > + regulator-compatible = "buck_vdrm"; > > + regulator-name = "vdrm"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <1400000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vio18_reg: buck_vio18 { > > + regulator-compatible = "buck_vio18"; > > + regulator-name = "vio18"; > > + regulator-min-microvolt = <1620000>; > > + regulator-max-microvolt = <1980000>; > > + regulator-ramp-delay = <12500>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vtcxo_reg: ldo_vtcxo { > > + regulator-compatible = "ldo_vtcxo"; > > + regulator-name = "vtcxo"; > > + regulator-always-on; > > + }; > > + > > + mt6397_va28_reg: ldo_va28 { > > + regulator-compatible = "ldo_va28"; > > + regulator-name = "va28"; > > + }; > > + > > + mt6397_vcama_reg: ldo_vcama { > > + regulator-compatible = "ldo_vcama"; > > + regulator-name = "vcama"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vio28_reg: ldo_vio28 { > > + regulator-compatible = "ldo_vio28"; > > + regulator-name = "vio28"; > > + regulator-always-on; > > + }; > > + > > + mt6397_vusb_reg: ldo_vusb { > > + regulator-compatible = "ldo_vusb"; > > + regulator-name = "vusb"; > > + }; > > + > > + mt6397_vmc_reg: ldo_vmc { > > + regulator-compatible = "ldo_vmc"; > > + regulator-name = "vmc"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vmch_reg: ldo_vmch { > > + regulator-compatible = "ldo_vmch"; > > + regulator-name = "vmch"; > > + regulator-min-microvolt = <3000000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vemc_3v3_reg: ldo_vemc3v3 { > > + regulator-compatible = "ldo_vemc3v3"; > > + regulator-name = "vemc_3v3"; > > + regulator-min-microvolt = <3000000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vgp1_reg: ldo_vgp1 { > > + regulator-compatible = "ldo_vgp1"; > > + regulator-name = "vcamd"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-enable-ramp-delay = <240>; > > + }; > > + > > + mt6397_vgp2_reg: ldo_vgp2 { > > + regulator-compatible = "ldo_vgp2"; > > + regulator-name = "vcamio"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vgp3_reg: ldo_vgp3 { > > + regulator-compatible = "ldo_vgp3"; > > + regulator-name = "vcamaf"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vgp4_reg: ldo_vgp4 { > > + regulator-compatible = "ldo_vgp4"; > > + regulator-name = "vgp4"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vgp5_reg: ldo_vgp5 { > > + regulator-compatible = "ldo_vgp5"; > > + regulator-name = "vgp5"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <3000000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + > > + mt6397_vgp6_reg: ldo_vgp6 { > > + regulator-compatible = "ldo_vgp6"; > > + regulator-name = "vgp6"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + regulator-always-on; > > + }; > > + > > + mt6397_vibr_reg: ldo_vibr { > > + regulator-compatible = "ldo_vibr"; > > + regulator-name = "vibr"; > > + regulator-min-microvolt = <1300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-enable-ramp-delay = <218>; > > + }; > > + }; > > + }; > > +}; > > + > > +&spi { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&spi_pins_a>; > > + mediatek,pad-select = <1>; > > + status = "okay"; > > + /* clients */ > > + cros_ec: ec@0 { > > + compatible = "google,cros-ec-spi"; > > + reg = <0x0>; > > + spi-max-frequency = <12000000>; > > + interrupt-parent = <&pio>; > > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > > + google,cros-ec-spi-msg-delay = <500>; > > + > > + i2c_tunnel: i2c-tunnel@0 { > > + compatible = "google,cros-ec-i2c-tunnel"; > > + google,remote-bus = <0>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + battery: sbs-battery@b { > > + compatible = "sbs,sbs-battery"; > > + reg = <0xb>; > > + sbs,i2c-retry-count = <2>; > > + sbs,poll-retry-count = <1>; > > + }; > > + }; > > + }; > > +}; > > + > > +&thermal { > > + bank0-supply = <&mt6397_vpca15_reg>; > > + bank1-supply = <&da9211_vcpu_reg>; > > +}; > > + > > +&uart0 { > > + status = "okay"; > > +}; > > + > > +&ssusb { > > + dr_mode = "host"; > > + wakeup-source; > > + vusb33-supply = <&mt6397_vusb_reg>; > > + status = "okay"; > > +}; > > + > > +&usb_host { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&usb_pins>; > > + vusb33-supply = <&mt6397_vusb_reg>; > > + status = "okay"; > > +}; > > + > > +#include "../../../../arm/boot/dts/cros-ec-keyboard.dtsi" > Why don't we use > #include <arm/cros-ec-keyboard.dtsi> ? > Will fix in next version > > \ No newline at end of file > > > > As Yingjoe already mentioned, please add a newline :) > > Regards, > Matthias _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board 2020-01-13 18:01 ` Hsin-Yi Wang (?) @ 2020-01-14 15:10 ` Matthias Brugger -1 siblings, 0 replies; 42+ messages in thread From: Matthias Brugger @ 2020-01-14 15:10 UTC (permalink / raw) To: Hsin-Yi Wang Cc: moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE, Rob Herring, Mark Rutland, Devicetree List, lkml, linux-mediatek, Nicolas Boichat, Enric Balletbo i Serra, Daniel Kurtz On 13/01/2020 19:01, Hsin-Yi Wang wrote: > On Fri, Jan 10, 2020 at 9:42 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: >> >> > Thanks, I will address the comments and send next version >> >> On 10/01/2020 08:37, Hsin-Yi Wang wrote: >>> Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 >>> SoC. >>> >>> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> >>> --- >>> Changes in v2: >>> - remove downstream nodes and unused nodes >>> - use GPIO_ACTIVE_LOW for ps8640 gpios >>> - move trackpad to hana >>> --- >>> arch/arm64/boot/dts/mediatek/Makefile | 3 + >>> .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + >>> .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + >>> .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + >>> arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + >>> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ >>> 6 files changed, 1161 insertions(+) >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi >>> >>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile >>> index 458bbc422a94..b45a45a565a1 100644 >>> --- a/arch/arm64/boot/dts/mediatek/Makefile >>> +++ b/arch/arm64/boot/dts/mediatek/Makefile >>> @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts >>> new file mode 100644 >>> index 000000000000..a3616bc3d859 >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts >>> @@ -0,0 +1,27 @@ >>> +// SPDX-License-Identifier: GPL-2.0-only >>> +/* >>> + * Copyright 2019 MediaTek Inc. >>> + */ >>> + >>> +/dts-v1/; >>> +#include "mt8173-elm-hana.dtsi" >>> + >>> +/ { >>> + model = "Mediatek Hana rev7 board"; >>> + compatible = "google,hana-rev7", "mediatek,mt8173"; >>> +}; >>> + >>> +&cpu_thermal { >>> + trips { >>> + cpu_crit: cpu_crit@0 { >>> + temperature = <100000>; >>> + type = "critical"; >>> + }; >>> + }; >>> +}; >>> + >>> +&gpio_keys { >>> + /delete-node/tablet_mode; >>> + /delete-node/volume_down; >>> + /delete-node/volume_up; >>> +}; >>> \ No newline at end of file >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts >>> new file mode 100644 >>> index 000000000000..8cbcc75192e3 >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts >>> @@ -0,0 +1,16 @@ >>> +// SPDX-License-Identifier: GPL-2.0-only >>> +/* >>> + * Copyright 2016 MediaTek Inc. >>> + */ >>> + >>> +/dts-v1/; >>> +#include "mt8173-elm-hana.dtsi" >>> + >>> +/ { >>> + model = "Mediatek Hana rev0 board"; If we can't make this more verbose, at least delete rev0, that's confusing. Should the name not be "Google Hana"? >>> + compatible = "google,hana-rev6", >>> + "google,hana-rev5", "google,hana-rev4", >>> + "google,hana-rev3", "google,hana-rev2", >>> + "google,hana-rev1", "google,hana-rev0", >>> + "google,hana", "mediatek,mt8173"; >>> +}; >> >> I'm a bit confused about all this versions. Do you want to keep them for >> internal use, as I suppose only rev6 is available to the general public, >> correct? I'm fine with keeping the old revisions if that's of use for you, >> otherwise I'd prefer to delete them. > According to internal feedback system, at least rev3, rev6, rev7 are > in general public. I can delete rev0~rev2, since they are earlier > version device. If you don't plan to use the rev0 to rev2 in-house, then we can delete them. >> >> Model name could be more verbose. >> >>> \ No newline at end of file >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi >>> new file mode 100644 >>> index 000000000000..35e12b290947 >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi >>> @@ -0,0 +1,60 @@ >>> +// SPDX-License-Identifier: GPL-2.0-only >>> +/* >>> + * Copyright 2016 MediaTek Inc. >>> + */ >>> + >>> +#include "mt8173-elm.dtsi" >>> + >>> +&i2c0 { >>> + clock-frequency = <200000>; >>> +}; >>> + >>> +&i2c3 { >>> + touchscreen2: touchscreen@34 { >>> + compatible = "melfas,mip4_ts"; >>> + reg = <0x34>; >>> + interrupt-parent = <&pio>; >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; >>> + }; >>> + >>> + touchscreen3: touchscreen@20 { >>> + compatible = "hid-over-i2c"; >>> + reg = <0x20>; >>> + hid-descr-addr = <0x0020>; >>> + interrupt-parent = <&pio>; >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; >>> + }; >> >> In v1 you mentioned: >> "Partners wants to increase touchpad and touchscreen source (they choose >> synaptics) for hana 300e, and synaptics uses hid-over-i2c driver." >> >> So the partner uses the same compatible (google,hana-rev6?) for both devices? >> > Confirmed with others, second source devices share same compatible. We should create independent dts for the different boards. Like it is done for gru-scarlett. Doesn't the FW provide the sku number in the compatible string? >>> +}; >>> + >>> +&i2c4 { >>> + trackpad2: trackpad@2c { >>> + compatible = "hid-over-i2c"; >>> + interrupt-parent = <&pio>; >>> + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; >>> + reg = <0x2c>; >>> + hid-descr-addr = <0x0020>; >>> + wakeup-source; >>> + }; >>> +}; >>> + >>> +&mmc1 { >>> + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; >>> +}; >>> + >>> +&pio { >>> + hdmi_mux_pins: hdmi_mux_pins { >>> + pins2 { >>> + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; >>> + bias-pull-up; >>> + output-high; >>> + }; >>> + }; >>> + >>> + mmc1_pins_default: mmc1default { >>> + pins_wp { >>> + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; >>> + input-enable; >>> + bias-pull-up; >>> + }; >>> + }; >>> +}; >>> \ No newline at end of file >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts >>> new file mode 100644 >>> index 000000000000..e5da2355760e >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts >>> @@ -0,0 +1,15 @@ >>> +// SPDX-License-Identifier: GPL-2.0-only >>> +/* >>> + * Copyright 2016 MediaTek Inc. >>> + */ >>> + >>> +/dts-v1/; >>> +#include "mt8173-elm.dtsi" >>> + >>> +/ { >>> + model = "Mediatek Elm board"; >>> + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", >>> + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", >>> + "google,elm-rev2", "google,elm-rev1", >>> + "google,elm", "mediatek,mt8173"; >>> +}; >>> \ No newline at end of file >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi >>> new file mode 100644 >>> index 000000000000..2ac738bebe04 >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi >>> @@ -0,0 +1,1040 @@ >>> +// SPDX-License-Identifier: GPL-2.0-only >>> +/* >>> + * Copyright 2016 MediaTek Inc. >>> + */ >>> + >>> +#include <dt-bindings/input/input.h> >>> +#include <dt-bindings/gpio/gpio.h> >>> +#include "mt8173.dtsi" >>> + >>> +/ { >>> + aliases { >>> + serial0 = &uart0; >>> + serial1 = &uart1; >>> + serial2 = &uart2; >>> + serial3 = &uart3; >>> + }; >>> + >>> + memory@40000000 { >>> + device_type = "memory"; >>> + reg = <0 0x40000000 0 0x80000000>; >>> + }; >>> + >>> + backlight_lcd: backlight_lcd { >>> + compatible = "pwm-backlight"; >>> + pwms = <&pwm0 0 1000000>; >>> + brightness-levels = < >>> + 0 16 32 48 64 80 96 112 >>> + 128 144 160 176 192 208 224 240 >>> + 255 >>> + >; >>> + default-brightness-level = <9>; >>> + power-supply = <&bl_fixed_reg>; >>> + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; >>> + >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&disp_pwm0_pins>; >>> + status = "okay"; >>> + }; >>> + >>> + bl_fixed_reg: fixedregulator@2 { >>> + compatible = "regulator-fixed"; >>> + regulator-name = "bl_fixed"; >>> + regulator-min-microvolt = <1800000>; >>> + regulator-max-microvolt = <1800000>; >>> + startup-delay-us = <1000>; >>> + enable-active-high; >>> + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&bl_fixed_pins>; >>> + }; >>> + >>> + chosen { >>> + stdout-path = &uart0; >>> + }; >>> + >>> + gpio_keys: gpio-keys { >>> + compatible = "gpio-keys"; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&gpio_keys_pins>; >>> + >>> + lid { >>> + label = "Lid"; >>> + gpios = <&pio 69 GPIO_ACTIVE_LOW>; >>> + linux,code = <0>; /* SW_LID */ >>> + linux,input-type = <5>; /* EV_SW */ >>> + gpio-key,wakeup; >>> + }; >>> + >>> + power { >>> + label = "Power"; >>> + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; >>> + linux,code = <KEY_POWER>; >>> + debounce-interval = <30>; >>> + gpio-key,wakeup; >>> + }; >>> + >>> + tablet_mode { >>> + label = "Tablet_mode"; >>> + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; >>> + linux,code = <1>; /* SW_TABLET_MODE */ >> >> can't we use SW_TABLET_MODE fomr linux-event-codes.h? >> > Will fix this. >>> + linux,input-type = <5>; /* EV_SW */ >> >> same here. >> >>> + gpio-key,wakeup; >>> + }; >>> + >>> + volume_down { >>> + label = "Volume_down"; >>> + gpios = <&pio 123 GPIO_ACTIVE_LOW>; >>> + linux,code = <KEY_VOLUMEDOWN>; >>> + }; >>> + >>> + volume_up { >>> + label = "Volume_up"; >>> + gpios = <&pio 124 GPIO_ACTIVE_LOW>; >>> + linux,code = <KEY_VOLUMEUP>; >>> + }; >>> + }; >>> + >>> + panel: panel { >>> + compatible = "lg,lp120up1"; >>> + power-supply = <&panel_fixed_3v3>; >>> + ddc-i2c-bus = <&i2c0>; >>> + backlight = <&backlight_lcd>; >>> + >>> + port { >>> + panel_in: endpoint { >>> + remote-endpoint = <&ps8640_out>; >>> + }; >>> + }; >>> + }; >>> + >>> + panel_fixed_3v3: regulator@1 { >>> + compatible = "regulator-fixed"; >>> + regulator-name = "PANEL_3V3"; >>> + regulator-min-microvolt = <3300000>; >>> + regulator-max-microvolt = <3300000>; >>> + enable-active-high; >>> + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&panel_fixed_pins>; >>> + }; >>> + >>> + ps8640_fixed_1v2: regulator@2 { >>> + compatible = "regulator-fixed"; >>> + regulator-name = "PS8640_1V2"; >>> + regulator-min-microvolt = <1200000>; >>> + regulator-max-microvolt = <1200000>; >>> + regulator-enable-ramp-delay = <2000>; >>> + enable-active-high; >>> + regulator-boot-on; >>> + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&ps8640_fixed_pins>; >>> + }; >>> + >>> + sdio_fixed_3v3: fixedregulator@0 { >>> + compatible = "regulator-fixed"; >>> + regulator-name = "3V3"; >>> + regulator-min-microvolt = <3300000>; >>> + regulator-max-microvolt = <3300000>; >>> + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; >> >> we don't need to set the pincontroller mux here? >> > Will double check on schematic and add it. >>> + }; >>> + >>> + sound: sound { >>> + compatible = "mediatek,mt8173-rt5650"; >>> + mediatek,audio-codec = <&rt5650 &hdmi0>; >>> + mediatek,platform = <&afe>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&aud_i2s2>; >>> + >>> + mediatek,mclk = <1>; >>> + codec-capture { >>> + sound-dai = <&rt5650 1>; >>> + }; >>> + }; >>> + >>> + hdmicon: connector { >>> + compatible = "hdmi-connector"; >>> + label = "hdmi"; >>> + type = "a"; >>> + ddc-i2c-bus = <&hdmiddc0>; >>> + >>> + port { >>> + hdmi_connector_in: endpoint { >>> + remote-endpoint = <&hdmi0_out>; >>> + }; >>> + }; >>> + }; >>> +}; >>> + >>> +&cec { >>> + status = "okay"; >>> +}; >>> + >>> +&cpu0 { >>> + proc-supply = <&mt6397_vpca15_reg>; >>> +}; >>> + >>> +&cpu1 { >>> + proc-supply = <&mt6397_vpca15_reg>; >>> +}; >>> + >>> +&cpu2 { >>> + proc-supply = <&da9211_vcpu_reg>; >>> + sram-supply = <&mt6397_vsramca7_reg>; >>> +}; >>> + >>> +&cpu3 { >>> + proc-supply = <&da9211_vcpu_reg>; >>> + sram-supply = <&mt6397_vsramca7_reg>; >>> +}; >>> + >>> +&cpu_thermal { >>> + sustainable-power = <4500>; /* milliwatts */ >>> + trips { >>> + threshold: trip-point@0 { >>> + temperature = <60000>; >>> + }; >>> + >>> + target: trip-point@1 { >>> + temperature = <65000>; >>> + }; >>> + }; >>> +}; >>> + >>> +&dsi0 { >>> + status = "okay"; >>> + ports { >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + >>> + port@1 { >>> + dsi0_out: endpoint { >>> + remote-endpoint = <&ps8640_in>; >>> + }; >>> + }; >>> + }; >>> +}; >>> + >>> +&dpi0 { >>> + status = "okay"; >>> +}; >>> + >>> +&hdmi0 { >>> + status = "okay"; >>> + ports { >>> + port@1 { >>> + reg = <1>; >>> + >>> + hdmi0_out: endpoint { >>> + remote-endpoint = <&hdmi_connector_in>; >>> + }; >>> + }; >>> + }; >>> +}; >>> + >>> +&hdmi_phy { >>> + status = "okay"; >>> + mediatek,ibias = <0xc>; >>> +}; >>> + >>> +&i2c0 { >>> + status = "okay"; >>> + >>> + rt5650: audio-codec@1a { >>> + compatible = "realtek,rt5650"; >>> + reg = <0x1a>; >>> + avdd-supply = <&mt6397_vgp1_reg>; >>> + cpvdd-supply = <&mt6397_vcama_reg>; >> >> Hm, only defined for "realtek,rt5663", I suppose that's an inconsistency in the >> binding documentation. Can you please double check? >> > This one? https://github.com/torvalds/linux/blob/master/sound/soc/codecs/rt5645.c#L3582 > Yes, I checked myself and send a patch to fix the binding description, which was missing the two suppliers. >>> + interrupt-parent = <&pio>; >>> + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&rt5650_irq>; >>> + #sound-dai-cells = <1>; >>> + realtek,dmic1-data-pin = <2>; >>> + realtek,jd-mode = <2>; >>> + }; >>> + >>> + ps8640: edp-bridge@8 { >>> + compatible = "parade,ps8640"; >>> + reg = <0x8>; >>> + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; >>> + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&ps8640_pins>; >>> + vdd12-supply = <&ps8640_fixed_1v2>; >>> + vdd33-supply = <&mt6397_vgp2_reg>; >>> + >>> + ports { >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + >>> + port@0 { >>> + reg = <0>; >>> + >>> + ps8640_in: endpoint { >>> + remote-endpoint = <&dsi0_out>; >>> + }; >>> + }; >>> + >>> + port@1 { >>> + reg = <1>; >>> + >>> + ps8640_out: endpoint { >>> + remote-endpoint = <&panel_in>; >>> + }; >>> + }; >>> + }; >>> + }; >>> +}; >>> + >>> +&i2c1 { >>> + clock-frequency = <1500000>; >>> + status = "okay"; >>> + >>> + da9211: da9211@68 { >>> + compatible = "dlg,da9211"; >>> + reg = <0x68>; >>> + >> >> no interrupts? binding description have this stated as required. what happens >> when the device raises an interrupt? > Will double check on schematic and add it. >> >>> + regulators { >>> + da9211_vcpu_reg: BUCKA { >>> + regulator-name = "VBUCKA"; >>> + regulator-min-microvolt = < 700000>; >>> + regulator-max-microvolt = <1310000>; >>> + regulator-min-microamp = <2000000>; >>> + regulator-max-microamp = <4400000>; >>> + regulator-ramp-delay = <10000>; >>> + regulator-always-on; >>> + regulator-allowed-modes = <0 1>; >>> + }; >>> + >>> + da9211_vgpu_reg: BUCKB { >>> + regulator-name = "VBUCKB"; >>> + regulator-min-microvolt = < 700000>; >>> + regulator-max-microvolt = <1310000>; >>> + regulator-min-microamp = <2000000>; >>> + regulator-max-microamp = <3000000>; >>> + regulator-ramp-delay = <10000>; >>> + }; >>> + }; >>> + }; >>> +}; >>> + >>> +&i2c2 { >>> + status = "okay"; >>> + >>> + tpm: tpm@20 { >>> + compatible = "infineon,slb9645tt"; >>> + reg = <0x20>; >>> + powered-while-suspended; >>> + }; >>> +}; >>> + >>> +&i2c3 { >>> + clock-frequency = <400000>; >>> + status = "okay"; >>> + >>> + touchscreen: touchscreen@10 { >>> + compatible = "elan,ekth3500"; >>> + reg = <0x10>; >>> + interrupt-parent = <&pio>; >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; >>> + }; >>> +}; >>> + >>> +&i2c4 { >>> + clock-frequency = <400000>; >>> + status = "okay"; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&trackpad_irq>; >> >> Why not move the pinctrl properties into the trackpad node? >> > As second source trackpad device and original device shares same > compatible string (rev id), we need to add 2nd trackpad node here. > According to previous log (since I don't have a second source trackpad > device to test), adding pinctrl in each trackpad node, there would be > error: > [ 0.643501] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin URXD3 > already requested by 7-0015; cannot claim for 7-002c > [ 0.643525] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin-117 > (7-002c) status -22 > [ 0.643548] mediatek-mt8173-pinctrl 1000b000.pinctrl: could not > request pin 117 (URXD3) from group URXD3 on device 1000b000.pinctrl > [ 0.643568] i2c_hid 7-002c: Error applying setting, reverse things back > [ 0.643867] i2c 7-002c: Driver i2c_hid requests probe deferral > > I think we can fix this, if we create the aforementioned two board DTS files. Correct? >>> + >>> + trackpad: trackpad@15 { >>> + compatible = "elan,ekth3000"; >>> + interrupt-parent = <&pio>; >>> + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; >>> + reg = <0x15>; >>> + vcc-supply = <&mt6397_vgp6_reg>; >>> + wakeup-source; >>> + }; >>> +}; >>> + >>> +&mipi_tx0 { >>> + status = "okay"; >>> +}; >>> + >>> +&mmc0 { >>> + status = "okay"; >>> + pinctrl-names = "default", "state_uhs"; >>> + pinctrl-0 = <&mmc0_pins_default>; >>> + pinctrl-1 = <&mmc0_pins_uhs>; >>> + bus-width = <8>; >>> + max-frequency = <200000000>; >>> + cap-mmc-highspeed; >>> + mmc-hs200-1_8v; >>> + mmc-hs400-1_8v; >>> + cap-mmc-hw-reset; >>> + hs400-ds-delay = <0x14015>; >>> + mediatek,hs200-cmd-int-delay=<30>; >>> + mediatek,hs400-cmd-int-delay=<14>; >>> + mediatek,hs400-cmd-resp-sel-rising; >>> + vmmc-supply = <&mt6397_vemc_3v3_reg>; >>> + vqmmc-supply = <&mt6397_vio18_reg>; >>> + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; >>> + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; >>> + non-removable; >>> +}; >>> + >>> +&mmc1 { >>> + status = "okay"; >>> + pinctrl-names = "default", "state_uhs"; >>> + pinctrl-0 = <&mmc1_pins_default>; >>> + pinctrl-1 = <&mmc1_pins_uhs>; >>> + bus-width = <4>; >>> + max-frequency = <200000000>; >>> + cap-sd-highspeed; >>> + sd-uhs-sdr50; >>> + sd-uhs-sdr104; >>> + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; >>> + vmmc-supply = <&mt6397_vmch_reg>; >>> + vqmmc-supply = <&mt6397_vmc_reg>; >>> +}; >>> + >>> +&mmc3 { >>> + status = "okay"; >>> + pinctrl-names = "default", "state_uhs"; >>> + pinctrl-0 = <&mmc3_pins_default>; >>> + pinctrl-1 = <&mmc3_pins_uhs>; >>> + bus-width = <4>; >>> + max-frequency = <200000000>; >>> + cap-sd-highspeed; >>> + sd-uhs-sdr50; >>> + sd-uhs-sdr104; >>> + sdr104-clk-delay = <5>; >> >> Not an upstream property, please delete it. >> >>> + keep-power-in-suspend; >>> + enable-sdio-wakeup; >>> + cap-sdio-irq; >>> + vmmc-supply = <&sdio_fixed_3v3>; >>> + vqmmc-supply = <&mt6397_vgp3_reg>; >>> + non-removable; >>> + cap-power-off-card; >>> + >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + >>> + btmrvl: btmrvl@2 { >>> + compatible = "marvell,sd8897-bt"; >>> + reg = <2>; >>> + interrupt-parent = <&pio>; >>> + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; >>> + marvell,wakeup-pin = /bits/ 16 <0x0d>; >>> + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; >>> + }; >>> + >>> + mwifiex: mwifiex@1 { >>> + compatible = "marvell,sd8897"; >>> + reg = <1>; >>> + interrupt-parent = <&pio>; >>> + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; >>> + marvell,wakeup-pin = <3>; >>> + marvell,caldata_ed_mac = /bits/ 8 < >>> +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 >>> +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 >>> + >; >> >> Not an upstream property, please delete. >> >>> + }; >>> +}; >>> + >>> +&nor_flash { >>> + status = "okay"; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&nor_gpio1_pins>; >>> + bus-width = <8>; >>> + max-frequency = <50000000>; >>> + non-removable; >>> + flash@0 { >>> + compatible = "jedec,spi-nor"; >>> + reg = <0>; >>> + }; >>> +}; >>> + >>> +&pio { >>> + aud_i2s2: aud_i2s2 { >>> + pins1 { >>> + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, >>> + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, >>> + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, >>> + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, >>> + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, >>> + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, >>> + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; >>> + bias-pull-down; >>> + }; >>> + }; >>> + >>> + bl_fixed_pins: bl_fixed_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; >>> + output-low; >>> + }; >>> + }; >>> + >>> + bt_wake_pins: bt_wake_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + disp_pwm0_pins: disp_pwm0_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; >>> + output-low; >>> + }; >>> + }; >>> + >>> + gpio_keys_pins: gpio_keys_pins { >>> + volume_pins { >>> + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, >>> + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; >>> + bias-pull-up; >>> + }; >>> + >>> + tablet_mode_pins { >>> + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + hdmi_mux_pins: hdmi_mux_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; >>> + }; >>> + }; >>> + >>> + mmc0_pins_default: mmc0default { >>> + pins_cmd_dat { >>> + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, >>> + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, >>> + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, >>> + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, >>> + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, >>> + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, >>> + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, >>> + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, >>> + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; >>> + bias-pull-up; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; >>> + bias-pull-down; >> >> identation. >> >>> + }; >>> + >>> + pins_rst { >>> + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + mmc1_pins_default: mmc1default { >>> + pins_cmd_dat { >>> + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, >>> + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, >>> + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, >>> + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, >>> + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_4mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; >>> + bias-pull-down; >>> + drive-strength = <MTK_DRIVE_4mA>; >>> + }; >>> + >>> + pins_insert { >>> + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + mmc3_pins_default: mmc3default { >>> + pins_dat { >>> + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, >>> + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, >>> + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, >>> + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + >>> + pins_cmd { >>> + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; >>> + bias-pull-down; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + }; >>> + >>> + pins_pdn { >>> + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; >>> + output-low; >>> + }; >>> + }; >>> + >>> + mmc0_pins_uhs: mmc0 { >>> + pins_cmd_dat { >>> + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, >>> + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, >>> + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, >>> + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, >>> + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, >>> + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, >>> + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, >>> + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, >>> + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_6mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; >>> + drive-strength = <MTK_DRIVE_6mA>; >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; >>> + }; >>> + >>> + pins_ds { >>> + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; >>> + drive-strength = <MTK_DRIVE_10mA>; >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; >>> + }; >>> + >>> + pins_rst { >>> + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + mmc1_pins_uhs: mmc1 { >>> + pins_cmd_dat { >>> + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, >>> + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, >>> + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, >>> + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, >>> + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_6mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + }; >>> + >>> + mmc3_pins_uhs: mmc3 { >>> + pins_dat { >>> + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, >>> + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, >>> + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, >>> + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + >>> + pins_cmd { >>> + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + }; >>> + >>> + nor_gpio1_pins: nor { >>> + pins1 { >>> + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, >>> + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, >>> + <MT8173_PIN_8_EINT8__FUNC_SFIN>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_4mA>; >>> + bias-pull-up; >>> + }; >>> + >>> + pins2 { >>> + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; >>> + drive-strength = <MTK_DRIVE_4mA>; >>> + bias-pull-up; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_4mA>; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + panel_fixed_pins: panel_fixed_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; >>> + }; >>> + }; >>> + >>> + ps8640_pins: ps8640_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, >>> + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, >>> + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; >>> + }; >>> + }; >>> + >>> + ps8640_fixed_pins: ps8640_fixed_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; >>> + }; >>> + }; >>> + >>> + rt5650_irq: rt5650_irq { >>> + pins1 { >>> + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; >>> + bias-pull-down; >>> + }; >>> + }; >>> + >>> + spi_pins_a: spi1 { >>> + pins1 { >>> + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; >>> + bias-pull-up; >>> + }; >>> + >>> + pins_spi { >>> + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, >>> + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, >>> + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, >>> + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; >>> + bias-disable; >>> + }; >>> + }; >>> + >>> + trackpad_irq: trackpad_irq { >>> + pins1 { >>> + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; >>> + input-enable; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + usb_pins: usb@0 { >>> + pins1 { >>> + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; >>> + output-high; >>> + bias-disable; >>> + }; >>> + }; >>> + >>> + wifi_wake_pins: wifi_wake_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; >>> + bias-pull-up; >>> + }; >>> + }; >>> +}; >>> + >>> +&pwm0 { >>> + status = "okay"; >>> +}; >>> + >>> +&pwrap { >>> + pmic: mt6397 { >>> + compatible = "mediatek,mt6397"; >>> + #address-cells = <1>; >>> + #size-cells = <1>; >>> + interrupt-parent = <&pio>; >>> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; >>> + interrupt-controller; >>> + #interrupt-cells = <2>; >>> + >>> + mt6397rtc: mt6397rtc { >> >> AFAIK this should be >> rtc: mt6397rtc { >> >> Please fix that for all subnodes. >> > Will fix in next version >>> + compatible = "mediatek,mt6397-rtc"; >>> + }; >>> + >>> + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { >>> + compatible = "mediatek,mt6397-pctl-pmic-syscfg", >>> + "syscon"; >>> + reg = <0 0x0000c000 0 0x0108>; >> >> not an upstream compatible, please delete the node. >> I think my comment was not correct. I'll have to dig more to understand why we have a compatible without a binding description. Regards, Matthias ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board @ 2020-01-14 15:10 ` Matthias Brugger 0 siblings, 0 replies; 42+ messages in thread From: Matthias Brugger @ 2020-01-14 15:10 UTC (permalink / raw) To: Hsin-Yi Wang Cc: Mark Rutland, Devicetree List, Nicolas Boichat, lkml, Daniel Kurtz, Rob Herring, linux-mediatek, Enric Balletbo i Serra, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On 13/01/2020 19:01, Hsin-Yi Wang wrote: > On Fri, Jan 10, 2020 at 9:42 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: >> >> > Thanks, I will address the comments and send next version >> >> On 10/01/2020 08:37, Hsin-Yi Wang wrote: >>> Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 >>> SoC. >>> >>> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> >>> --- >>> Changes in v2: >>> - remove downstream nodes and unused nodes >>> - use GPIO_ACTIVE_LOW for ps8640 gpios >>> - move trackpad to hana >>> --- >>> arch/arm64/boot/dts/mediatek/Makefile | 3 + >>> .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + >>> .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + >>> .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + >>> arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + >>> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ >>> 6 files changed, 1161 insertions(+) >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi >>> >>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile >>> index 458bbc422a94..b45a45a565a1 100644 >>> --- a/arch/arm64/boot/dts/mediatek/Makefile >>> +++ b/arch/arm64/boot/dts/mediatek/Makefile >>> @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts >>> new file mode 100644 >>> index 000000000000..a3616bc3d859 >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts >>> @@ -0,0 +1,27 @@ >>> +// SPDX-License-Identifier: GPL-2.0-only >>> +/* >>> + * Copyright 2019 MediaTek Inc. >>> + */ >>> + >>> +/dts-v1/; >>> +#include "mt8173-elm-hana.dtsi" >>> + >>> +/ { >>> + model = "Mediatek Hana rev7 board"; >>> + compatible = "google,hana-rev7", "mediatek,mt8173"; >>> +}; >>> + >>> +&cpu_thermal { >>> + trips { >>> + cpu_crit: cpu_crit@0 { >>> + temperature = <100000>; >>> + type = "critical"; >>> + }; >>> + }; >>> +}; >>> + >>> +&gpio_keys { >>> + /delete-node/tablet_mode; >>> + /delete-node/volume_down; >>> + /delete-node/volume_up; >>> +}; >>> \ No newline at end of file >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts >>> new file mode 100644 >>> index 000000000000..8cbcc75192e3 >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts >>> @@ -0,0 +1,16 @@ >>> +// SPDX-License-Identifier: GPL-2.0-only >>> +/* >>> + * Copyright 2016 MediaTek Inc. >>> + */ >>> + >>> +/dts-v1/; >>> +#include "mt8173-elm-hana.dtsi" >>> + >>> +/ { >>> + model = "Mediatek Hana rev0 board"; If we can't make this more verbose, at least delete rev0, that's confusing. Should the name not be "Google Hana"? >>> + compatible = "google,hana-rev6", >>> + "google,hana-rev5", "google,hana-rev4", >>> + "google,hana-rev3", "google,hana-rev2", >>> + "google,hana-rev1", "google,hana-rev0", >>> + "google,hana", "mediatek,mt8173"; >>> +}; >> >> I'm a bit confused about all this versions. Do you want to keep them for >> internal use, as I suppose only rev6 is available to the general public, >> correct? I'm fine with keeping the old revisions if that's of use for you, >> otherwise I'd prefer to delete them. > According to internal feedback system, at least rev3, rev6, rev7 are > in general public. I can delete rev0~rev2, since they are earlier > version device. If you don't plan to use the rev0 to rev2 in-house, then we can delete them. >> >> Model name could be more verbose. >> >>> \ No newline at end of file >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi >>> new file mode 100644 >>> index 000000000000..35e12b290947 >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi >>> @@ -0,0 +1,60 @@ >>> +// SPDX-License-Identifier: GPL-2.0-only >>> +/* >>> + * Copyright 2016 MediaTek Inc. >>> + */ >>> + >>> +#include "mt8173-elm.dtsi" >>> + >>> +&i2c0 { >>> + clock-frequency = <200000>; >>> +}; >>> + >>> +&i2c3 { >>> + touchscreen2: touchscreen@34 { >>> + compatible = "melfas,mip4_ts"; >>> + reg = <0x34>; >>> + interrupt-parent = <&pio>; >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; >>> + }; >>> + >>> + touchscreen3: touchscreen@20 { >>> + compatible = "hid-over-i2c"; >>> + reg = <0x20>; >>> + hid-descr-addr = <0x0020>; >>> + interrupt-parent = <&pio>; >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; >>> + }; >> >> In v1 you mentioned: >> "Partners wants to increase touchpad and touchscreen source (they choose >> synaptics) for hana 300e, and synaptics uses hid-over-i2c driver." >> >> So the partner uses the same compatible (google,hana-rev6?) for both devices? >> > Confirmed with others, second source devices share same compatible. We should create independent dts for the different boards. Like it is done for gru-scarlett. Doesn't the FW provide the sku number in the compatible string? >>> +}; >>> + >>> +&i2c4 { >>> + trackpad2: trackpad@2c { >>> + compatible = "hid-over-i2c"; >>> + interrupt-parent = <&pio>; >>> + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; >>> + reg = <0x2c>; >>> + hid-descr-addr = <0x0020>; >>> + wakeup-source; >>> + }; >>> +}; >>> + >>> +&mmc1 { >>> + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; >>> +}; >>> + >>> +&pio { >>> + hdmi_mux_pins: hdmi_mux_pins { >>> + pins2 { >>> + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; >>> + bias-pull-up; >>> + output-high; >>> + }; >>> + }; >>> + >>> + mmc1_pins_default: mmc1default { >>> + pins_wp { >>> + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; >>> + input-enable; >>> + bias-pull-up; >>> + }; >>> + }; >>> +}; >>> \ No newline at end of file >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts >>> new file mode 100644 >>> index 000000000000..e5da2355760e >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts >>> @@ -0,0 +1,15 @@ >>> +// SPDX-License-Identifier: GPL-2.0-only >>> +/* >>> + * Copyright 2016 MediaTek Inc. >>> + */ >>> + >>> +/dts-v1/; >>> +#include "mt8173-elm.dtsi" >>> + >>> +/ { >>> + model = "Mediatek Elm board"; >>> + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", >>> + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", >>> + "google,elm-rev2", "google,elm-rev1", >>> + "google,elm", "mediatek,mt8173"; >>> +}; >>> \ No newline at end of file >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi >>> new file mode 100644 >>> index 000000000000..2ac738bebe04 >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi >>> @@ -0,0 +1,1040 @@ >>> +// SPDX-License-Identifier: GPL-2.0-only >>> +/* >>> + * Copyright 2016 MediaTek Inc. >>> + */ >>> + >>> +#include <dt-bindings/input/input.h> >>> +#include <dt-bindings/gpio/gpio.h> >>> +#include "mt8173.dtsi" >>> + >>> +/ { >>> + aliases { >>> + serial0 = &uart0; >>> + serial1 = &uart1; >>> + serial2 = &uart2; >>> + serial3 = &uart3; >>> + }; >>> + >>> + memory@40000000 { >>> + device_type = "memory"; >>> + reg = <0 0x40000000 0 0x80000000>; >>> + }; >>> + >>> + backlight_lcd: backlight_lcd { >>> + compatible = "pwm-backlight"; >>> + pwms = <&pwm0 0 1000000>; >>> + brightness-levels = < >>> + 0 16 32 48 64 80 96 112 >>> + 128 144 160 176 192 208 224 240 >>> + 255 >>> + >; >>> + default-brightness-level = <9>; >>> + power-supply = <&bl_fixed_reg>; >>> + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; >>> + >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&disp_pwm0_pins>; >>> + status = "okay"; >>> + }; >>> + >>> + bl_fixed_reg: fixedregulator@2 { >>> + compatible = "regulator-fixed"; >>> + regulator-name = "bl_fixed"; >>> + regulator-min-microvolt = <1800000>; >>> + regulator-max-microvolt = <1800000>; >>> + startup-delay-us = <1000>; >>> + enable-active-high; >>> + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&bl_fixed_pins>; >>> + }; >>> + >>> + chosen { >>> + stdout-path = &uart0; >>> + }; >>> + >>> + gpio_keys: gpio-keys { >>> + compatible = "gpio-keys"; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&gpio_keys_pins>; >>> + >>> + lid { >>> + label = "Lid"; >>> + gpios = <&pio 69 GPIO_ACTIVE_LOW>; >>> + linux,code = <0>; /* SW_LID */ >>> + linux,input-type = <5>; /* EV_SW */ >>> + gpio-key,wakeup; >>> + }; >>> + >>> + power { >>> + label = "Power"; >>> + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; >>> + linux,code = <KEY_POWER>; >>> + debounce-interval = <30>; >>> + gpio-key,wakeup; >>> + }; >>> + >>> + tablet_mode { >>> + label = "Tablet_mode"; >>> + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; >>> + linux,code = <1>; /* SW_TABLET_MODE */ >> >> can't we use SW_TABLET_MODE fomr linux-event-codes.h? >> > Will fix this. >>> + linux,input-type = <5>; /* EV_SW */ >> >> same here. >> >>> + gpio-key,wakeup; >>> + }; >>> + >>> + volume_down { >>> + label = "Volume_down"; >>> + gpios = <&pio 123 GPIO_ACTIVE_LOW>; >>> + linux,code = <KEY_VOLUMEDOWN>; >>> + }; >>> + >>> + volume_up { >>> + label = "Volume_up"; >>> + gpios = <&pio 124 GPIO_ACTIVE_LOW>; >>> + linux,code = <KEY_VOLUMEUP>; >>> + }; >>> + }; >>> + >>> + panel: panel { >>> + compatible = "lg,lp120up1"; >>> + power-supply = <&panel_fixed_3v3>; >>> + ddc-i2c-bus = <&i2c0>; >>> + backlight = <&backlight_lcd>; >>> + >>> + port { >>> + panel_in: endpoint { >>> + remote-endpoint = <&ps8640_out>; >>> + }; >>> + }; >>> + }; >>> + >>> + panel_fixed_3v3: regulator@1 { >>> + compatible = "regulator-fixed"; >>> + regulator-name = "PANEL_3V3"; >>> + regulator-min-microvolt = <3300000>; >>> + regulator-max-microvolt = <3300000>; >>> + enable-active-high; >>> + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&panel_fixed_pins>; >>> + }; >>> + >>> + ps8640_fixed_1v2: regulator@2 { >>> + compatible = "regulator-fixed"; >>> + regulator-name = "PS8640_1V2"; >>> + regulator-min-microvolt = <1200000>; >>> + regulator-max-microvolt = <1200000>; >>> + regulator-enable-ramp-delay = <2000>; >>> + enable-active-high; >>> + regulator-boot-on; >>> + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&ps8640_fixed_pins>; >>> + }; >>> + >>> + sdio_fixed_3v3: fixedregulator@0 { >>> + compatible = "regulator-fixed"; >>> + regulator-name = "3V3"; >>> + regulator-min-microvolt = <3300000>; >>> + regulator-max-microvolt = <3300000>; >>> + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; >> >> we don't need to set the pincontroller mux here? >> > Will double check on schematic and add it. >>> + }; >>> + >>> + sound: sound { >>> + compatible = "mediatek,mt8173-rt5650"; >>> + mediatek,audio-codec = <&rt5650 &hdmi0>; >>> + mediatek,platform = <&afe>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&aud_i2s2>; >>> + >>> + mediatek,mclk = <1>; >>> + codec-capture { >>> + sound-dai = <&rt5650 1>; >>> + }; >>> + }; >>> + >>> + hdmicon: connector { >>> + compatible = "hdmi-connector"; >>> + label = "hdmi"; >>> + type = "a"; >>> + ddc-i2c-bus = <&hdmiddc0>; >>> + >>> + port { >>> + hdmi_connector_in: endpoint { >>> + remote-endpoint = <&hdmi0_out>; >>> + }; >>> + }; >>> + }; >>> +}; >>> + >>> +&cec { >>> + status = "okay"; >>> +}; >>> + >>> +&cpu0 { >>> + proc-supply = <&mt6397_vpca15_reg>; >>> +}; >>> + >>> +&cpu1 { >>> + proc-supply = <&mt6397_vpca15_reg>; >>> +}; >>> + >>> +&cpu2 { >>> + proc-supply = <&da9211_vcpu_reg>; >>> + sram-supply = <&mt6397_vsramca7_reg>; >>> +}; >>> + >>> +&cpu3 { >>> + proc-supply = <&da9211_vcpu_reg>; >>> + sram-supply = <&mt6397_vsramca7_reg>; >>> +}; >>> + >>> +&cpu_thermal { >>> + sustainable-power = <4500>; /* milliwatts */ >>> + trips { >>> + threshold: trip-point@0 { >>> + temperature = <60000>; >>> + }; >>> + >>> + target: trip-point@1 { >>> + temperature = <65000>; >>> + }; >>> + }; >>> +}; >>> + >>> +&dsi0 { >>> + status = "okay"; >>> + ports { >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + >>> + port@1 { >>> + dsi0_out: endpoint { >>> + remote-endpoint = <&ps8640_in>; >>> + }; >>> + }; >>> + }; >>> +}; >>> + >>> +&dpi0 { >>> + status = "okay"; >>> +}; >>> + >>> +&hdmi0 { >>> + status = "okay"; >>> + ports { >>> + port@1 { >>> + reg = <1>; >>> + >>> + hdmi0_out: endpoint { >>> + remote-endpoint = <&hdmi_connector_in>; >>> + }; >>> + }; >>> + }; >>> +}; >>> + >>> +&hdmi_phy { >>> + status = "okay"; >>> + mediatek,ibias = <0xc>; >>> +}; >>> + >>> +&i2c0 { >>> + status = "okay"; >>> + >>> + rt5650: audio-codec@1a { >>> + compatible = "realtek,rt5650"; >>> + reg = <0x1a>; >>> + avdd-supply = <&mt6397_vgp1_reg>; >>> + cpvdd-supply = <&mt6397_vcama_reg>; >> >> Hm, only defined for "realtek,rt5663", I suppose that's an inconsistency in the >> binding documentation. Can you please double check? >> > This one? https://github.com/torvalds/linux/blob/master/sound/soc/codecs/rt5645.c#L3582 > Yes, I checked myself and send a patch to fix the binding description, which was missing the two suppliers. >>> + interrupt-parent = <&pio>; >>> + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&rt5650_irq>; >>> + #sound-dai-cells = <1>; >>> + realtek,dmic1-data-pin = <2>; >>> + realtek,jd-mode = <2>; >>> + }; >>> + >>> + ps8640: edp-bridge@8 { >>> + compatible = "parade,ps8640"; >>> + reg = <0x8>; >>> + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; >>> + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&ps8640_pins>; >>> + vdd12-supply = <&ps8640_fixed_1v2>; >>> + vdd33-supply = <&mt6397_vgp2_reg>; >>> + >>> + ports { >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + >>> + port@0 { >>> + reg = <0>; >>> + >>> + ps8640_in: endpoint { >>> + remote-endpoint = <&dsi0_out>; >>> + }; >>> + }; >>> + >>> + port@1 { >>> + reg = <1>; >>> + >>> + ps8640_out: endpoint { >>> + remote-endpoint = <&panel_in>; >>> + }; >>> + }; >>> + }; >>> + }; >>> +}; >>> + >>> +&i2c1 { >>> + clock-frequency = <1500000>; >>> + status = "okay"; >>> + >>> + da9211: da9211@68 { >>> + compatible = "dlg,da9211"; >>> + reg = <0x68>; >>> + >> >> no interrupts? binding description have this stated as required. what happens >> when the device raises an interrupt? > Will double check on schematic and add it. >> >>> + regulators { >>> + da9211_vcpu_reg: BUCKA { >>> + regulator-name = "VBUCKA"; >>> + regulator-min-microvolt = < 700000>; >>> + regulator-max-microvolt = <1310000>; >>> + regulator-min-microamp = <2000000>; >>> + regulator-max-microamp = <4400000>; >>> + regulator-ramp-delay = <10000>; >>> + regulator-always-on; >>> + regulator-allowed-modes = <0 1>; >>> + }; >>> + >>> + da9211_vgpu_reg: BUCKB { >>> + regulator-name = "VBUCKB"; >>> + regulator-min-microvolt = < 700000>; >>> + regulator-max-microvolt = <1310000>; >>> + regulator-min-microamp = <2000000>; >>> + regulator-max-microamp = <3000000>; >>> + regulator-ramp-delay = <10000>; >>> + }; >>> + }; >>> + }; >>> +}; >>> + >>> +&i2c2 { >>> + status = "okay"; >>> + >>> + tpm: tpm@20 { >>> + compatible = "infineon,slb9645tt"; >>> + reg = <0x20>; >>> + powered-while-suspended; >>> + }; >>> +}; >>> + >>> +&i2c3 { >>> + clock-frequency = <400000>; >>> + status = "okay"; >>> + >>> + touchscreen: touchscreen@10 { >>> + compatible = "elan,ekth3500"; >>> + reg = <0x10>; >>> + interrupt-parent = <&pio>; >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; >>> + }; >>> +}; >>> + >>> +&i2c4 { >>> + clock-frequency = <400000>; >>> + status = "okay"; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&trackpad_irq>; >> >> Why not move the pinctrl properties into the trackpad node? >> > As second source trackpad device and original device shares same > compatible string (rev id), we need to add 2nd trackpad node here. > According to previous log (since I don't have a second source trackpad > device to test), adding pinctrl in each trackpad node, there would be > error: > [ 0.643501] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin URXD3 > already requested by 7-0015; cannot claim for 7-002c > [ 0.643525] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin-117 > (7-002c) status -22 > [ 0.643548] mediatek-mt8173-pinctrl 1000b000.pinctrl: could not > request pin 117 (URXD3) from group URXD3 on device 1000b000.pinctrl > [ 0.643568] i2c_hid 7-002c: Error applying setting, reverse things back > [ 0.643867] i2c 7-002c: Driver i2c_hid requests probe deferral > > I think we can fix this, if we create the aforementioned two board DTS files. Correct? >>> + >>> + trackpad: trackpad@15 { >>> + compatible = "elan,ekth3000"; >>> + interrupt-parent = <&pio>; >>> + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; >>> + reg = <0x15>; >>> + vcc-supply = <&mt6397_vgp6_reg>; >>> + wakeup-source; >>> + }; >>> +}; >>> + >>> +&mipi_tx0 { >>> + status = "okay"; >>> +}; >>> + >>> +&mmc0 { >>> + status = "okay"; >>> + pinctrl-names = "default", "state_uhs"; >>> + pinctrl-0 = <&mmc0_pins_default>; >>> + pinctrl-1 = <&mmc0_pins_uhs>; >>> + bus-width = <8>; >>> + max-frequency = <200000000>; >>> + cap-mmc-highspeed; >>> + mmc-hs200-1_8v; >>> + mmc-hs400-1_8v; >>> + cap-mmc-hw-reset; >>> + hs400-ds-delay = <0x14015>; >>> + mediatek,hs200-cmd-int-delay=<30>; >>> + mediatek,hs400-cmd-int-delay=<14>; >>> + mediatek,hs400-cmd-resp-sel-rising; >>> + vmmc-supply = <&mt6397_vemc_3v3_reg>; >>> + vqmmc-supply = <&mt6397_vio18_reg>; >>> + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; >>> + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; >>> + non-removable; >>> +}; >>> + >>> +&mmc1 { >>> + status = "okay"; >>> + pinctrl-names = "default", "state_uhs"; >>> + pinctrl-0 = <&mmc1_pins_default>; >>> + pinctrl-1 = <&mmc1_pins_uhs>; >>> + bus-width = <4>; >>> + max-frequency = <200000000>; >>> + cap-sd-highspeed; >>> + sd-uhs-sdr50; >>> + sd-uhs-sdr104; >>> + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; >>> + vmmc-supply = <&mt6397_vmch_reg>; >>> + vqmmc-supply = <&mt6397_vmc_reg>; >>> +}; >>> + >>> +&mmc3 { >>> + status = "okay"; >>> + pinctrl-names = "default", "state_uhs"; >>> + pinctrl-0 = <&mmc3_pins_default>; >>> + pinctrl-1 = <&mmc3_pins_uhs>; >>> + bus-width = <4>; >>> + max-frequency = <200000000>; >>> + cap-sd-highspeed; >>> + sd-uhs-sdr50; >>> + sd-uhs-sdr104; >>> + sdr104-clk-delay = <5>; >> >> Not an upstream property, please delete it. >> >>> + keep-power-in-suspend; >>> + enable-sdio-wakeup; >>> + cap-sdio-irq; >>> + vmmc-supply = <&sdio_fixed_3v3>; >>> + vqmmc-supply = <&mt6397_vgp3_reg>; >>> + non-removable; >>> + cap-power-off-card; >>> + >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + >>> + btmrvl: btmrvl@2 { >>> + compatible = "marvell,sd8897-bt"; >>> + reg = <2>; >>> + interrupt-parent = <&pio>; >>> + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; >>> + marvell,wakeup-pin = /bits/ 16 <0x0d>; >>> + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; >>> + }; >>> + >>> + mwifiex: mwifiex@1 { >>> + compatible = "marvell,sd8897"; >>> + reg = <1>; >>> + interrupt-parent = <&pio>; >>> + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; >>> + marvell,wakeup-pin = <3>; >>> + marvell,caldata_ed_mac = /bits/ 8 < >>> +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 >>> +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 >>> + >; >> >> Not an upstream property, please delete. >> >>> + }; >>> +}; >>> + >>> +&nor_flash { >>> + status = "okay"; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&nor_gpio1_pins>; >>> + bus-width = <8>; >>> + max-frequency = <50000000>; >>> + non-removable; >>> + flash@0 { >>> + compatible = "jedec,spi-nor"; >>> + reg = <0>; >>> + }; >>> +}; >>> + >>> +&pio { >>> + aud_i2s2: aud_i2s2 { >>> + pins1 { >>> + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, >>> + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, >>> + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, >>> + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, >>> + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, >>> + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, >>> + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; >>> + bias-pull-down; >>> + }; >>> + }; >>> + >>> + bl_fixed_pins: bl_fixed_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; >>> + output-low; >>> + }; >>> + }; >>> + >>> + bt_wake_pins: bt_wake_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + disp_pwm0_pins: disp_pwm0_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; >>> + output-low; >>> + }; >>> + }; >>> + >>> + gpio_keys_pins: gpio_keys_pins { >>> + volume_pins { >>> + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, >>> + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; >>> + bias-pull-up; >>> + }; >>> + >>> + tablet_mode_pins { >>> + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + hdmi_mux_pins: hdmi_mux_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; >>> + }; >>> + }; >>> + >>> + mmc0_pins_default: mmc0default { >>> + pins_cmd_dat { >>> + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, >>> + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, >>> + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, >>> + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, >>> + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, >>> + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, >>> + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, >>> + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, >>> + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; >>> + bias-pull-up; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; >>> + bias-pull-down; >> >> identation. >> >>> + }; >>> + >>> + pins_rst { >>> + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + mmc1_pins_default: mmc1default { >>> + pins_cmd_dat { >>> + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, >>> + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, >>> + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, >>> + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, >>> + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_4mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; >>> + bias-pull-down; >>> + drive-strength = <MTK_DRIVE_4mA>; >>> + }; >>> + >>> + pins_insert { >>> + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + mmc3_pins_default: mmc3default { >>> + pins_dat { >>> + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, >>> + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, >>> + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, >>> + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + >>> + pins_cmd { >>> + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; >>> + bias-pull-down; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + }; >>> + >>> + pins_pdn { >>> + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; >>> + output-low; >>> + }; >>> + }; >>> + >>> + mmc0_pins_uhs: mmc0 { >>> + pins_cmd_dat { >>> + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, >>> + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, >>> + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, >>> + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, >>> + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, >>> + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, >>> + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, >>> + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, >>> + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_6mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; >>> + drive-strength = <MTK_DRIVE_6mA>; >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; >>> + }; >>> + >>> + pins_ds { >>> + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; >>> + drive-strength = <MTK_DRIVE_10mA>; >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; >>> + }; >>> + >>> + pins_rst { >>> + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + mmc1_pins_uhs: mmc1 { >>> + pins_cmd_dat { >>> + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, >>> + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, >>> + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, >>> + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, >>> + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_6mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + }; >>> + >>> + mmc3_pins_uhs: mmc3 { >>> + pins_dat { >>> + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, >>> + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, >>> + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, >>> + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + >>> + pins_cmd { >>> + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + }; >>> + >>> + nor_gpio1_pins: nor { >>> + pins1 { >>> + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, >>> + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, >>> + <MT8173_PIN_8_EINT8__FUNC_SFIN>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_4mA>; >>> + bias-pull-up; >>> + }; >>> + >>> + pins2 { >>> + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; >>> + drive-strength = <MTK_DRIVE_4mA>; >>> + bias-pull-up; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_4mA>; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + panel_fixed_pins: panel_fixed_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; >>> + }; >>> + }; >>> + >>> + ps8640_pins: ps8640_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, >>> + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, >>> + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; >>> + }; >>> + }; >>> + >>> + ps8640_fixed_pins: ps8640_fixed_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; >>> + }; >>> + }; >>> + >>> + rt5650_irq: rt5650_irq { >>> + pins1 { >>> + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; >>> + bias-pull-down; >>> + }; >>> + }; >>> + >>> + spi_pins_a: spi1 { >>> + pins1 { >>> + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; >>> + bias-pull-up; >>> + }; >>> + >>> + pins_spi { >>> + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, >>> + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, >>> + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, >>> + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; >>> + bias-disable; >>> + }; >>> + }; >>> + >>> + trackpad_irq: trackpad_irq { >>> + pins1 { >>> + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; >>> + input-enable; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + usb_pins: usb@0 { >>> + pins1 { >>> + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; >>> + output-high; >>> + bias-disable; >>> + }; >>> + }; >>> + >>> + wifi_wake_pins: wifi_wake_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; >>> + bias-pull-up; >>> + }; >>> + }; >>> +}; >>> + >>> +&pwm0 { >>> + status = "okay"; >>> +}; >>> + >>> +&pwrap { >>> + pmic: mt6397 { >>> + compatible = "mediatek,mt6397"; >>> + #address-cells = <1>; >>> + #size-cells = <1>; >>> + interrupt-parent = <&pio>; >>> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; >>> + interrupt-controller; >>> + #interrupt-cells = <2>; >>> + >>> + mt6397rtc: mt6397rtc { >> >> AFAIK this should be >> rtc: mt6397rtc { >> >> Please fix that for all subnodes. >> > Will fix in next version >>> + compatible = "mediatek,mt6397-rtc"; >>> + }; >>> + >>> + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { >>> + compatible = "mediatek,mt6397-pctl-pmic-syscfg", >>> + "syscon"; >>> + reg = <0 0x0000c000 0 0x0108>; >> >> not an upstream compatible, please delete the node. >> I think my comment was not correct. I'll have to dig more to understand why we have a compatible without a binding description. Regards, Matthias _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board @ 2020-01-14 15:10 ` Matthias Brugger 0 siblings, 0 replies; 42+ messages in thread From: Matthias Brugger @ 2020-01-14 15:10 UTC (permalink / raw) To: Hsin-Yi Wang Cc: Mark Rutland, Devicetree List, Nicolas Boichat, lkml, Rob Herring, linux-mediatek, Enric Balletbo i Serra, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On 13/01/2020 19:01, Hsin-Yi Wang wrote: > On Fri, Jan 10, 2020 at 9:42 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: >> >> > Thanks, I will address the comments and send next version >> >> On 10/01/2020 08:37, Hsin-Yi Wang wrote: >>> Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 >>> SoC. >>> >>> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> >>> --- >>> Changes in v2: >>> - remove downstream nodes and unused nodes >>> - use GPIO_ACTIVE_LOW for ps8640 gpios >>> - move trackpad to hana >>> --- >>> arch/arm64/boot/dts/mediatek/Makefile | 3 + >>> .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + >>> .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + >>> .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + >>> arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + >>> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ >>> 6 files changed, 1161 insertions(+) >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi >>> >>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile >>> index 458bbc422a94..b45a45a565a1 100644 >>> --- a/arch/arm64/boot/dts/mediatek/Makefile >>> +++ b/arch/arm64/boot/dts/mediatek/Makefile >>> @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts >>> new file mode 100644 >>> index 000000000000..a3616bc3d859 >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts >>> @@ -0,0 +1,27 @@ >>> +// SPDX-License-Identifier: GPL-2.0-only >>> +/* >>> + * Copyright 2019 MediaTek Inc. >>> + */ >>> + >>> +/dts-v1/; >>> +#include "mt8173-elm-hana.dtsi" >>> + >>> +/ { >>> + model = "Mediatek Hana rev7 board"; >>> + compatible = "google,hana-rev7", "mediatek,mt8173"; >>> +}; >>> + >>> +&cpu_thermal { >>> + trips { >>> + cpu_crit: cpu_crit@0 { >>> + temperature = <100000>; >>> + type = "critical"; >>> + }; >>> + }; >>> +}; >>> + >>> +&gpio_keys { >>> + /delete-node/tablet_mode; >>> + /delete-node/volume_down; >>> + /delete-node/volume_up; >>> +}; >>> \ No newline at end of file >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts >>> new file mode 100644 >>> index 000000000000..8cbcc75192e3 >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts >>> @@ -0,0 +1,16 @@ >>> +// SPDX-License-Identifier: GPL-2.0-only >>> +/* >>> + * Copyright 2016 MediaTek Inc. >>> + */ >>> + >>> +/dts-v1/; >>> +#include "mt8173-elm-hana.dtsi" >>> + >>> +/ { >>> + model = "Mediatek Hana rev0 board"; If we can't make this more verbose, at least delete rev0, that's confusing. Should the name not be "Google Hana"? >>> + compatible = "google,hana-rev6", >>> + "google,hana-rev5", "google,hana-rev4", >>> + "google,hana-rev3", "google,hana-rev2", >>> + "google,hana-rev1", "google,hana-rev0", >>> + "google,hana", "mediatek,mt8173"; >>> +}; >> >> I'm a bit confused about all this versions. Do you want to keep them for >> internal use, as I suppose only rev6 is available to the general public, >> correct? I'm fine with keeping the old revisions if that's of use for you, >> otherwise I'd prefer to delete them. > According to internal feedback system, at least rev3, rev6, rev7 are > in general public. I can delete rev0~rev2, since they are earlier > version device. If you don't plan to use the rev0 to rev2 in-house, then we can delete them. >> >> Model name could be more verbose. >> >>> \ No newline at end of file >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi >>> new file mode 100644 >>> index 000000000000..35e12b290947 >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi >>> @@ -0,0 +1,60 @@ >>> +// SPDX-License-Identifier: GPL-2.0-only >>> +/* >>> + * Copyright 2016 MediaTek Inc. >>> + */ >>> + >>> +#include "mt8173-elm.dtsi" >>> + >>> +&i2c0 { >>> + clock-frequency = <200000>; >>> +}; >>> + >>> +&i2c3 { >>> + touchscreen2: touchscreen@34 { >>> + compatible = "melfas,mip4_ts"; >>> + reg = <0x34>; >>> + interrupt-parent = <&pio>; >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; >>> + }; >>> + >>> + touchscreen3: touchscreen@20 { >>> + compatible = "hid-over-i2c"; >>> + reg = <0x20>; >>> + hid-descr-addr = <0x0020>; >>> + interrupt-parent = <&pio>; >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; >>> + }; >> >> In v1 you mentioned: >> "Partners wants to increase touchpad and touchscreen source (they choose >> synaptics) for hana 300e, and synaptics uses hid-over-i2c driver." >> >> So the partner uses the same compatible (google,hana-rev6?) for both devices? >> > Confirmed with others, second source devices share same compatible. We should create independent dts for the different boards. Like it is done for gru-scarlett. Doesn't the FW provide the sku number in the compatible string? >>> +}; >>> + >>> +&i2c4 { >>> + trackpad2: trackpad@2c { >>> + compatible = "hid-over-i2c"; >>> + interrupt-parent = <&pio>; >>> + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; >>> + reg = <0x2c>; >>> + hid-descr-addr = <0x0020>; >>> + wakeup-source; >>> + }; >>> +}; >>> + >>> +&mmc1 { >>> + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; >>> +}; >>> + >>> +&pio { >>> + hdmi_mux_pins: hdmi_mux_pins { >>> + pins2 { >>> + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; >>> + bias-pull-up; >>> + output-high; >>> + }; >>> + }; >>> + >>> + mmc1_pins_default: mmc1default { >>> + pins_wp { >>> + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; >>> + input-enable; >>> + bias-pull-up; >>> + }; >>> + }; >>> +}; >>> \ No newline at end of file >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts >>> new file mode 100644 >>> index 000000000000..e5da2355760e >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts >>> @@ -0,0 +1,15 @@ >>> +// SPDX-License-Identifier: GPL-2.0-only >>> +/* >>> + * Copyright 2016 MediaTek Inc. >>> + */ >>> + >>> +/dts-v1/; >>> +#include "mt8173-elm.dtsi" >>> + >>> +/ { >>> + model = "Mediatek Elm board"; >>> + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", >>> + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", >>> + "google,elm-rev2", "google,elm-rev1", >>> + "google,elm", "mediatek,mt8173"; >>> +}; >>> \ No newline at end of file >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi >>> new file mode 100644 >>> index 000000000000..2ac738bebe04 >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi >>> @@ -0,0 +1,1040 @@ >>> +// SPDX-License-Identifier: GPL-2.0-only >>> +/* >>> + * Copyright 2016 MediaTek Inc. >>> + */ >>> + >>> +#include <dt-bindings/input/input.h> >>> +#include <dt-bindings/gpio/gpio.h> >>> +#include "mt8173.dtsi" >>> + >>> +/ { >>> + aliases { >>> + serial0 = &uart0; >>> + serial1 = &uart1; >>> + serial2 = &uart2; >>> + serial3 = &uart3; >>> + }; >>> + >>> + memory@40000000 { >>> + device_type = "memory"; >>> + reg = <0 0x40000000 0 0x80000000>; >>> + }; >>> + >>> + backlight_lcd: backlight_lcd { >>> + compatible = "pwm-backlight"; >>> + pwms = <&pwm0 0 1000000>; >>> + brightness-levels = < >>> + 0 16 32 48 64 80 96 112 >>> + 128 144 160 176 192 208 224 240 >>> + 255 >>> + >; >>> + default-brightness-level = <9>; >>> + power-supply = <&bl_fixed_reg>; >>> + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; >>> + >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&disp_pwm0_pins>; >>> + status = "okay"; >>> + }; >>> + >>> + bl_fixed_reg: fixedregulator@2 { >>> + compatible = "regulator-fixed"; >>> + regulator-name = "bl_fixed"; >>> + regulator-min-microvolt = <1800000>; >>> + regulator-max-microvolt = <1800000>; >>> + startup-delay-us = <1000>; >>> + enable-active-high; >>> + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&bl_fixed_pins>; >>> + }; >>> + >>> + chosen { >>> + stdout-path = &uart0; >>> + }; >>> + >>> + gpio_keys: gpio-keys { >>> + compatible = "gpio-keys"; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&gpio_keys_pins>; >>> + >>> + lid { >>> + label = "Lid"; >>> + gpios = <&pio 69 GPIO_ACTIVE_LOW>; >>> + linux,code = <0>; /* SW_LID */ >>> + linux,input-type = <5>; /* EV_SW */ >>> + gpio-key,wakeup; >>> + }; >>> + >>> + power { >>> + label = "Power"; >>> + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; >>> + linux,code = <KEY_POWER>; >>> + debounce-interval = <30>; >>> + gpio-key,wakeup; >>> + }; >>> + >>> + tablet_mode { >>> + label = "Tablet_mode"; >>> + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; >>> + linux,code = <1>; /* SW_TABLET_MODE */ >> >> can't we use SW_TABLET_MODE fomr linux-event-codes.h? >> > Will fix this. >>> + linux,input-type = <5>; /* EV_SW */ >> >> same here. >> >>> + gpio-key,wakeup; >>> + }; >>> + >>> + volume_down { >>> + label = "Volume_down"; >>> + gpios = <&pio 123 GPIO_ACTIVE_LOW>; >>> + linux,code = <KEY_VOLUMEDOWN>; >>> + }; >>> + >>> + volume_up { >>> + label = "Volume_up"; >>> + gpios = <&pio 124 GPIO_ACTIVE_LOW>; >>> + linux,code = <KEY_VOLUMEUP>; >>> + }; >>> + }; >>> + >>> + panel: panel { >>> + compatible = "lg,lp120up1"; >>> + power-supply = <&panel_fixed_3v3>; >>> + ddc-i2c-bus = <&i2c0>; >>> + backlight = <&backlight_lcd>; >>> + >>> + port { >>> + panel_in: endpoint { >>> + remote-endpoint = <&ps8640_out>; >>> + }; >>> + }; >>> + }; >>> + >>> + panel_fixed_3v3: regulator@1 { >>> + compatible = "regulator-fixed"; >>> + regulator-name = "PANEL_3V3"; >>> + regulator-min-microvolt = <3300000>; >>> + regulator-max-microvolt = <3300000>; >>> + enable-active-high; >>> + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&panel_fixed_pins>; >>> + }; >>> + >>> + ps8640_fixed_1v2: regulator@2 { >>> + compatible = "regulator-fixed"; >>> + regulator-name = "PS8640_1V2"; >>> + regulator-min-microvolt = <1200000>; >>> + regulator-max-microvolt = <1200000>; >>> + regulator-enable-ramp-delay = <2000>; >>> + enable-active-high; >>> + regulator-boot-on; >>> + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&ps8640_fixed_pins>; >>> + }; >>> + >>> + sdio_fixed_3v3: fixedregulator@0 { >>> + compatible = "regulator-fixed"; >>> + regulator-name = "3V3"; >>> + regulator-min-microvolt = <3300000>; >>> + regulator-max-microvolt = <3300000>; >>> + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; >> >> we don't need to set the pincontroller mux here? >> > Will double check on schematic and add it. >>> + }; >>> + >>> + sound: sound { >>> + compatible = "mediatek,mt8173-rt5650"; >>> + mediatek,audio-codec = <&rt5650 &hdmi0>; >>> + mediatek,platform = <&afe>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&aud_i2s2>; >>> + >>> + mediatek,mclk = <1>; >>> + codec-capture { >>> + sound-dai = <&rt5650 1>; >>> + }; >>> + }; >>> + >>> + hdmicon: connector { >>> + compatible = "hdmi-connector"; >>> + label = "hdmi"; >>> + type = "a"; >>> + ddc-i2c-bus = <&hdmiddc0>; >>> + >>> + port { >>> + hdmi_connector_in: endpoint { >>> + remote-endpoint = <&hdmi0_out>; >>> + }; >>> + }; >>> + }; >>> +}; >>> + >>> +&cec { >>> + status = "okay"; >>> +}; >>> + >>> +&cpu0 { >>> + proc-supply = <&mt6397_vpca15_reg>; >>> +}; >>> + >>> +&cpu1 { >>> + proc-supply = <&mt6397_vpca15_reg>; >>> +}; >>> + >>> +&cpu2 { >>> + proc-supply = <&da9211_vcpu_reg>; >>> + sram-supply = <&mt6397_vsramca7_reg>; >>> +}; >>> + >>> +&cpu3 { >>> + proc-supply = <&da9211_vcpu_reg>; >>> + sram-supply = <&mt6397_vsramca7_reg>; >>> +}; >>> + >>> +&cpu_thermal { >>> + sustainable-power = <4500>; /* milliwatts */ >>> + trips { >>> + threshold: trip-point@0 { >>> + temperature = <60000>; >>> + }; >>> + >>> + target: trip-point@1 { >>> + temperature = <65000>; >>> + }; >>> + }; >>> +}; >>> + >>> +&dsi0 { >>> + status = "okay"; >>> + ports { >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + >>> + port@1 { >>> + dsi0_out: endpoint { >>> + remote-endpoint = <&ps8640_in>; >>> + }; >>> + }; >>> + }; >>> +}; >>> + >>> +&dpi0 { >>> + status = "okay"; >>> +}; >>> + >>> +&hdmi0 { >>> + status = "okay"; >>> + ports { >>> + port@1 { >>> + reg = <1>; >>> + >>> + hdmi0_out: endpoint { >>> + remote-endpoint = <&hdmi_connector_in>; >>> + }; >>> + }; >>> + }; >>> +}; >>> + >>> +&hdmi_phy { >>> + status = "okay"; >>> + mediatek,ibias = <0xc>; >>> +}; >>> + >>> +&i2c0 { >>> + status = "okay"; >>> + >>> + rt5650: audio-codec@1a { >>> + compatible = "realtek,rt5650"; >>> + reg = <0x1a>; >>> + avdd-supply = <&mt6397_vgp1_reg>; >>> + cpvdd-supply = <&mt6397_vcama_reg>; >> >> Hm, only defined for "realtek,rt5663", I suppose that's an inconsistency in the >> binding documentation. Can you please double check? >> > This one? https://github.com/torvalds/linux/blob/master/sound/soc/codecs/rt5645.c#L3582 > Yes, I checked myself and send a patch to fix the binding description, which was missing the two suppliers. >>> + interrupt-parent = <&pio>; >>> + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&rt5650_irq>; >>> + #sound-dai-cells = <1>; >>> + realtek,dmic1-data-pin = <2>; >>> + realtek,jd-mode = <2>; >>> + }; >>> + >>> + ps8640: edp-bridge@8 { >>> + compatible = "parade,ps8640"; >>> + reg = <0x8>; >>> + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; >>> + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&ps8640_pins>; >>> + vdd12-supply = <&ps8640_fixed_1v2>; >>> + vdd33-supply = <&mt6397_vgp2_reg>; >>> + >>> + ports { >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + >>> + port@0 { >>> + reg = <0>; >>> + >>> + ps8640_in: endpoint { >>> + remote-endpoint = <&dsi0_out>; >>> + }; >>> + }; >>> + >>> + port@1 { >>> + reg = <1>; >>> + >>> + ps8640_out: endpoint { >>> + remote-endpoint = <&panel_in>; >>> + }; >>> + }; >>> + }; >>> + }; >>> +}; >>> + >>> +&i2c1 { >>> + clock-frequency = <1500000>; >>> + status = "okay"; >>> + >>> + da9211: da9211@68 { >>> + compatible = "dlg,da9211"; >>> + reg = <0x68>; >>> + >> >> no interrupts? binding description have this stated as required. what happens >> when the device raises an interrupt? > Will double check on schematic and add it. >> >>> + regulators { >>> + da9211_vcpu_reg: BUCKA { >>> + regulator-name = "VBUCKA"; >>> + regulator-min-microvolt = < 700000>; >>> + regulator-max-microvolt = <1310000>; >>> + regulator-min-microamp = <2000000>; >>> + regulator-max-microamp = <4400000>; >>> + regulator-ramp-delay = <10000>; >>> + regulator-always-on; >>> + regulator-allowed-modes = <0 1>; >>> + }; >>> + >>> + da9211_vgpu_reg: BUCKB { >>> + regulator-name = "VBUCKB"; >>> + regulator-min-microvolt = < 700000>; >>> + regulator-max-microvolt = <1310000>; >>> + regulator-min-microamp = <2000000>; >>> + regulator-max-microamp = <3000000>; >>> + regulator-ramp-delay = <10000>; >>> + }; >>> + }; >>> + }; >>> +}; >>> + >>> +&i2c2 { >>> + status = "okay"; >>> + >>> + tpm: tpm@20 { >>> + compatible = "infineon,slb9645tt"; >>> + reg = <0x20>; >>> + powered-while-suspended; >>> + }; >>> +}; >>> + >>> +&i2c3 { >>> + clock-frequency = <400000>; >>> + status = "okay"; >>> + >>> + touchscreen: touchscreen@10 { >>> + compatible = "elan,ekth3500"; >>> + reg = <0x10>; >>> + interrupt-parent = <&pio>; >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; >>> + }; >>> +}; >>> + >>> +&i2c4 { >>> + clock-frequency = <400000>; >>> + status = "okay"; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&trackpad_irq>; >> >> Why not move the pinctrl properties into the trackpad node? >> > As second source trackpad device and original device shares same > compatible string (rev id), we need to add 2nd trackpad node here. > According to previous log (since I don't have a second source trackpad > device to test), adding pinctrl in each trackpad node, there would be > error: > [ 0.643501] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin URXD3 > already requested by 7-0015; cannot claim for 7-002c > [ 0.643525] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin-117 > (7-002c) status -22 > [ 0.643548] mediatek-mt8173-pinctrl 1000b000.pinctrl: could not > request pin 117 (URXD3) from group URXD3 on device 1000b000.pinctrl > [ 0.643568] i2c_hid 7-002c: Error applying setting, reverse things back > [ 0.643867] i2c 7-002c: Driver i2c_hid requests probe deferral > > I think we can fix this, if we create the aforementioned two board DTS files. Correct? >>> + >>> + trackpad: trackpad@15 { >>> + compatible = "elan,ekth3000"; >>> + interrupt-parent = <&pio>; >>> + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; >>> + reg = <0x15>; >>> + vcc-supply = <&mt6397_vgp6_reg>; >>> + wakeup-source; >>> + }; >>> +}; >>> + >>> +&mipi_tx0 { >>> + status = "okay"; >>> +}; >>> + >>> +&mmc0 { >>> + status = "okay"; >>> + pinctrl-names = "default", "state_uhs"; >>> + pinctrl-0 = <&mmc0_pins_default>; >>> + pinctrl-1 = <&mmc0_pins_uhs>; >>> + bus-width = <8>; >>> + max-frequency = <200000000>; >>> + cap-mmc-highspeed; >>> + mmc-hs200-1_8v; >>> + mmc-hs400-1_8v; >>> + cap-mmc-hw-reset; >>> + hs400-ds-delay = <0x14015>; >>> + mediatek,hs200-cmd-int-delay=<30>; >>> + mediatek,hs400-cmd-int-delay=<14>; >>> + mediatek,hs400-cmd-resp-sel-rising; >>> + vmmc-supply = <&mt6397_vemc_3v3_reg>; >>> + vqmmc-supply = <&mt6397_vio18_reg>; >>> + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; >>> + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; >>> + non-removable; >>> +}; >>> + >>> +&mmc1 { >>> + status = "okay"; >>> + pinctrl-names = "default", "state_uhs"; >>> + pinctrl-0 = <&mmc1_pins_default>; >>> + pinctrl-1 = <&mmc1_pins_uhs>; >>> + bus-width = <4>; >>> + max-frequency = <200000000>; >>> + cap-sd-highspeed; >>> + sd-uhs-sdr50; >>> + sd-uhs-sdr104; >>> + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; >>> + vmmc-supply = <&mt6397_vmch_reg>; >>> + vqmmc-supply = <&mt6397_vmc_reg>; >>> +}; >>> + >>> +&mmc3 { >>> + status = "okay"; >>> + pinctrl-names = "default", "state_uhs"; >>> + pinctrl-0 = <&mmc3_pins_default>; >>> + pinctrl-1 = <&mmc3_pins_uhs>; >>> + bus-width = <4>; >>> + max-frequency = <200000000>; >>> + cap-sd-highspeed; >>> + sd-uhs-sdr50; >>> + sd-uhs-sdr104; >>> + sdr104-clk-delay = <5>; >> >> Not an upstream property, please delete it. >> >>> + keep-power-in-suspend; >>> + enable-sdio-wakeup; >>> + cap-sdio-irq; >>> + vmmc-supply = <&sdio_fixed_3v3>; >>> + vqmmc-supply = <&mt6397_vgp3_reg>; >>> + non-removable; >>> + cap-power-off-card; >>> + >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + >>> + btmrvl: btmrvl@2 { >>> + compatible = "marvell,sd8897-bt"; >>> + reg = <2>; >>> + interrupt-parent = <&pio>; >>> + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; >>> + marvell,wakeup-pin = /bits/ 16 <0x0d>; >>> + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; >>> + }; >>> + >>> + mwifiex: mwifiex@1 { >>> + compatible = "marvell,sd8897"; >>> + reg = <1>; >>> + interrupt-parent = <&pio>; >>> + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; >>> + marvell,wakeup-pin = <3>; >>> + marvell,caldata_ed_mac = /bits/ 8 < >>> +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 >>> +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 >>> + >; >> >> Not an upstream property, please delete. >> >>> + }; >>> +}; >>> + >>> +&nor_flash { >>> + status = "okay"; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&nor_gpio1_pins>; >>> + bus-width = <8>; >>> + max-frequency = <50000000>; >>> + non-removable; >>> + flash@0 { >>> + compatible = "jedec,spi-nor"; >>> + reg = <0>; >>> + }; >>> +}; >>> + >>> +&pio { >>> + aud_i2s2: aud_i2s2 { >>> + pins1 { >>> + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, >>> + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, >>> + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, >>> + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, >>> + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, >>> + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, >>> + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; >>> + bias-pull-down; >>> + }; >>> + }; >>> + >>> + bl_fixed_pins: bl_fixed_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; >>> + output-low; >>> + }; >>> + }; >>> + >>> + bt_wake_pins: bt_wake_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + disp_pwm0_pins: disp_pwm0_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; >>> + output-low; >>> + }; >>> + }; >>> + >>> + gpio_keys_pins: gpio_keys_pins { >>> + volume_pins { >>> + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, >>> + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; >>> + bias-pull-up; >>> + }; >>> + >>> + tablet_mode_pins { >>> + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + hdmi_mux_pins: hdmi_mux_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; >>> + }; >>> + }; >>> + >>> + mmc0_pins_default: mmc0default { >>> + pins_cmd_dat { >>> + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, >>> + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, >>> + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, >>> + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, >>> + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, >>> + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, >>> + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, >>> + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, >>> + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; >>> + bias-pull-up; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; >>> + bias-pull-down; >> >> identation. >> >>> + }; >>> + >>> + pins_rst { >>> + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + mmc1_pins_default: mmc1default { >>> + pins_cmd_dat { >>> + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, >>> + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, >>> + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, >>> + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, >>> + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_4mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; >>> + bias-pull-down; >>> + drive-strength = <MTK_DRIVE_4mA>; >>> + }; >>> + >>> + pins_insert { >>> + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + mmc3_pins_default: mmc3default { >>> + pins_dat { >>> + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, >>> + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, >>> + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, >>> + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + >>> + pins_cmd { >>> + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; >>> + bias-pull-down; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + }; >>> + >>> + pins_pdn { >>> + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; >>> + output-low; >>> + }; >>> + }; >>> + >>> + mmc0_pins_uhs: mmc0 { >>> + pins_cmd_dat { >>> + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, >>> + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, >>> + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, >>> + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, >>> + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, >>> + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, >>> + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, >>> + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, >>> + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_6mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; >>> + drive-strength = <MTK_DRIVE_6mA>; >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; >>> + }; >>> + >>> + pins_ds { >>> + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; >>> + drive-strength = <MTK_DRIVE_10mA>; >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; >>> + }; >>> + >>> + pins_rst { >>> + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + mmc1_pins_uhs: mmc1 { >>> + pins_cmd_dat { >>> + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, >>> + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, >>> + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, >>> + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, >>> + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_6mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + }; >>> + >>> + mmc3_pins_uhs: mmc3 { >>> + pins_dat { >>> + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, >>> + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, >>> + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, >>> + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + >>> + pins_cmd { >>> + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; >>> + drive-strength = <MTK_DRIVE_8mA>; >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; >>> + }; >>> + }; >>> + >>> + nor_gpio1_pins: nor { >>> + pins1 { >>> + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, >>> + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, >>> + <MT8173_PIN_8_EINT8__FUNC_SFIN>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_4mA>; >>> + bias-pull-up; >>> + }; >>> + >>> + pins2 { >>> + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; >>> + drive-strength = <MTK_DRIVE_4mA>; >>> + bias-pull-up; >>> + }; >>> + >>> + pins_clk { >>> + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; >>> + input-enable; >>> + drive-strength = <MTK_DRIVE_4mA>; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + panel_fixed_pins: panel_fixed_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; >>> + }; >>> + }; >>> + >>> + ps8640_pins: ps8640_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, >>> + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, >>> + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; >>> + }; >>> + }; >>> + >>> + ps8640_fixed_pins: ps8640_fixed_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; >>> + }; >>> + }; >>> + >>> + rt5650_irq: rt5650_irq { >>> + pins1 { >>> + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; >>> + bias-pull-down; >>> + }; >>> + }; >>> + >>> + spi_pins_a: spi1 { >>> + pins1 { >>> + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; >>> + bias-pull-up; >>> + }; >>> + >>> + pins_spi { >>> + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, >>> + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, >>> + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, >>> + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; >>> + bias-disable; >>> + }; >>> + }; >>> + >>> + trackpad_irq: trackpad_irq { >>> + pins1 { >>> + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; >>> + input-enable; >>> + bias-pull-up; >>> + }; >>> + }; >>> + >>> + usb_pins: usb@0 { >>> + pins1 { >>> + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; >>> + output-high; >>> + bias-disable; >>> + }; >>> + }; >>> + >>> + wifi_wake_pins: wifi_wake_pins { >>> + pins1 { >>> + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; >>> + bias-pull-up; >>> + }; >>> + }; >>> +}; >>> + >>> +&pwm0 { >>> + status = "okay"; >>> +}; >>> + >>> +&pwrap { >>> + pmic: mt6397 { >>> + compatible = "mediatek,mt6397"; >>> + #address-cells = <1>; >>> + #size-cells = <1>; >>> + interrupt-parent = <&pio>; >>> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; >>> + interrupt-controller; >>> + #interrupt-cells = <2>; >>> + >>> + mt6397rtc: mt6397rtc { >> >> AFAIK this should be >> rtc: mt6397rtc { >> >> Please fix that for all subnodes. >> > Will fix in next version >>> + compatible = "mediatek,mt6397-rtc"; >>> + }; >>> + >>> + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { >>> + compatible = "mediatek,mt6397-pctl-pmic-syscfg", >>> + "syscon"; >>> + reg = <0 0x0000c000 0 0x0108>; >> >> not an upstream compatible, please delete the node. >> I think my comment was not correct. I'll have to dig more to understand why we have a compatible without a binding description. Regards, Matthias _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board 2020-01-14 15:10 ` Matthias Brugger (?) @ 2020-01-14 15:33 ` Hsin-Yi Wang -1 siblings, 0 replies; 42+ messages in thread From: Hsin-Yi Wang @ 2020-01-14 15:33 UTC (permalink / raw) To: Matthias Brugger Cc: moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE, Rob Herring, Mark Rutland, Devicetree List, lkml, linux-mediatek, Nicolas Boichat, Enric Balletbo i Serra, Daniel Kurtz On Tue, Jan 14, 2020 at 11:10 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: > > > > On 13/01/2020 19:01, Hsin-Yi Wang wrote: > > On Fri, Jan 10, 2020 at 9:42 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: > >> > >> > > Thanks, I will address the comments and send next version > >> > >> On 10/01/2020 08:37, Hsin-Yi Wang wrote: > >>> Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > >>> SoC. > >>> > >>> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > >>> --- > >>> Changes in v2: > >>> - remove downstream nodes and unused nodes > >>> - use GPIO_ACTIVE_LOW for ps8640 gpios > >>> - move trackpad to hana > >>> --- > >>> arch/arm64/boot/dts/mediatek/Makefile | 3 + > >>> .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > >>> .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > >>> .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > >>> arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > >>> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > >>> 6 files changed, 1161 insertions(+) > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> > >>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > >>> index 458bbc422a94..b45a45a565a1 100644 > >>> --- a/arch/arm64/boot/dts/mediatek/Makefile > >>> +++ b/arch/arm64/boot/dts/mediatek/Makefile > >>> @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> new file mode 100644 > >>> index 000000000000..a3616bc3d859 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> @@ -0,0 +1,27 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2019 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm-hana.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Hana rev7 board"; > >>> + compatible = "google,hana-rev7", "mediatek,mt8173"; > >>> +}; > >>> + > >>> +&cpu_thermal { > >>> + trips { > >>> + cpu_crit: cpu_crit@0 { > >>> + temperature = <100000>; > >>> + type = "critical"; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&gpio_keys { > >>> + /delete-node/tablet_mode; > >>> + /delete-node/volume_down; > >>> + /delete-node/volume_up; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> new file mode 100644 > >>> index 000000000000..8cbcc75192e3 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> @@ -0,0 +1,16 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm-hana.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Hana rev0 board"; > > If we can't make this more verbose, at least delete rev0, that's confusing. > Should the name not be "Google Hana"? > Sure, Google Hana makes sense. > >>> + compatible = "google,hana-rev6", > >>> + "google,hana-rev5", "google,hana-rev4", > >>> + "google,hana-rev3", "google,hana-rev2", > >>> + "google,hana-rev1", "google,hana-rev0", > >>> + "google,hana", "mediatek,mt8173"; > >>> +}; > >> > >> I'm a bit confused about all this versions. Do you want to keep them for > >> internal use, as I suppose only rev6 is available to the general public, > >> correct? I'm fine with keeping the old revisions if that's of use for you, > >> otherwise I'd prefer to delete them. > > According to internal feedback system, at least rev3, rev6, rev7 are > > in general public. I can delete rev0~rev2, since they are earlier > > version device. > > If you don't plan to use the rev0 to rev2 in-house, then we can delete them. > > >> > >> Model name could be more verbose. > >> > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> new file mode 100644 > >>> index 000000000000..35e12b290947 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> @@ -0,0 +1,60 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +#include "mt8173-elm.dtsi" > >>> + > >>> +&i2c0 { > >>> + clock-frequency = <200000>; > >>> +}; > >>> + > >>> +&i2c3 { > >>> + touchscreen2: touchscreen@34 { > >>> + compatible = "melfas,mip4_ts"; > >>> + reg = <0x34>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >>> + > >>> + touchscreen3: touchscreen@20 { > >>> + compatible = "hid-over-i2c"; > >>> + reg = <0x20>; > >>> + hid-descr-addr = <0x0020>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >> > >> In v1 you mentioned: > >> "Partners wants to increase touchpad and touchscreen source (they choose > >> synaptics) for hana 300e, and synaptics uses hid-over-i2c driver." > >> > >> So the partner uses the same compatible (google,hana-rev6?) for both devices? > >> > > Confirmed with others, second source devices share same compatible. > > We should create independent dts for the different boards. Like it is done for > gru-scarlett. Doesn't the FW provide the sku number in the compatible string? > Since I don't have a second source device to verify, I checked with SIE, and he said the sku number(board id) are same for device using original trackpad and second source trackpad in hana's case. So I don't think we can split them to independent dts. > >>> +}; > >>> + > >>> +&i2c4 { > >>> + trackpad2: trackpad@2c { > >>> + compatible = "hid-over-i2c"; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > >>> + reg = <0x2c>; > >>> + hid-descr-addr = <0x0020>; > >>> + wakeup-source; > >>> + }; > >>> +}; > >>> + > >>> +&mmc1 { > >>> + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; > >>> +}; > >>> + > >>> +&pio { > >>> + hdmi_mux_pins: hdmi_mux_pins { > >>> + pins2 { > >>> + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; > >>> + bias-pull-up; > >>> + output-high; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_default: mmc1default { > >>> + pins_wp { > >>> + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; > >>> + input-enable; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> new file mode 100644 > >>> index 000000000000..e5da2355760e > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> @@ -0,0 +1,15 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Elm board"; > >>> + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", > >>> + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", > >>> + "google,elm-rev2", "google,elm-rev1", > >>> + "google,elm", "mediatek,mt8173"; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> new file mode 100644 > >>> index 000000000000..2ac738bebe04 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> @@ -0,0 +1,1040 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +#include <dt-bindings/input/input.h> > >>> +#include <dt-bindings/gpio/gpio.h> > >>> +#include "mt8173.dtsi" > >>> + > >>> +/ { > >>> + aliases { > >>> + serial0 = &uart0; > >>> + serial1 = &uart1; > >>> + serial2 = &uart2; > >>> + serial3 = &uart3; > >>> + }; > >>> + > >>> + memory@40000000 { > >>> + device_type = "memory"; > >>> + reg = <0 0x40000000 0 0x80000000>; > >>> + }; > >>> + > >>> + backlight_lcd: backlight_lcd { > >>> + compatible = "pwm-backlight"; > >>> + pwms = <&pwm0 0 1000000>; > >>> + brightness-levels = < > >>> + 0 16 32 48 64 80 96 112 > >>> + 128 144 160 176 192 208 224 240 > >>> + 255 > >>> + >; > >>> + default-brightness-level = <9>; > >>> + power-supply = <&bl_fixed_reg>; > >>> + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; > >>> + > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&disp_pwm0_pins>; > >>> + status = "okay"; > >>> + }; > >>> + > >>> + bl_fixed_reg: fixedregulator@2 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "bl_fixed"; > >>> + regulator-min-microvolt = <1800000>; > >>> + regulator-max-microvolt = <1800000>; > >>> + startup-delay-us = <1000>; > >>> + enable-active-high; > >>> + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&bl_fixed_pins>; > >>> + }; > >>> + > >>> + chosen { > >>> + stdout-path = &uart0; > >>> + }; > >>> + > >>> + gpio_keys: gpio-keys { > >>> + compatible = "gpio-keys"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&gpio_keys_pins>; > >>> + > >>> + lid { > >>> + label = "Lid"; > >>> + gpios = <&pio 69 GPIO_ACTIVE_LOW>; > >>> + linux,code = <0>; /* SW_LID */ > >>> + linux,input-type = <5>; /* EV_SW */ > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + power { > >>> + label = "Power"; > >>> + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; > >>> + linux,code = <KEY_POWER>; > >>> + debounce-interval = <30>; > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + tablet_mode { > >>> + label = "Tablet_mode"; > >>> + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; > >>> + linux,code = <1>; /* SW_TABLET_MODE */ > >> > >> can't we use SW_TABLET_MODE fomr linux-event-codes.h? > >> > > Will fix this. > >>> + linux,input-type = <5>; /* EV_SW */ > >> > >> same here. > >> > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + volume_down { > >>> + label = "Volume_down"; > >>> + gpios = <&pio 123 GPIO_ACTIVE_LOW>; > >>> + linux,code = <KEY_VOLUMEDOWN>; > >>> + }; > >>> + > >>> + volume_up { > >>> + label = "Volume_up"; > >>> + gpios = <&pio 124 GPIO_ACTIVE_LOW>; > >>> + linux,code = <KEY_VOLUMEUP>; > >>> + }; > >>> + }; > >>> + > >>> + panel: panel { > >>> + compatible = "lg,lp120up1"; > >>> + power-supply = <&panel_fixed_3v3>; > >>> + ddc-i2c-bus = <&i2c0>; > >>> + backlight = <&backlight_lcd>; > >>> + > >>> + port { > >>> + panel_in: endpoint { > >>> + remote-endpoint = <&ps8640_out>; > >>> + }; > >>> + }; > >>> + }; > >>> + > >>> + panel_fixed_3v3: regulator@1 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "PANEL_3V3"; > >>> + regulator-min-microvolt = <3300000>; > >>> + regulator-max-microvolt = <3300000>; > >>> + enable-active-high; > >>> + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&panel_fixed_pins>; > >>> + }; > >>> + > >>> + ps8640_fixed_1v2: regulator@2 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "PS8640_1V2"; > >>> + regulator-min-microvolt = <1200000>; > >>> + regulator-max-microvolt = <1200000>; > >>> + regulator-enable-ramp-delay = <2000>; > >>> + enable-active-high; > >>> + regulator-boot-on; > >>> + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&ps8640_fixed_pins>; > >>> + }; > >>> + > >>> + sdio_fixed_3v3: fixedregulator@0 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "3V3"; > >>> + regulator-min-microvolt = <3300000>; > >>> + regulator-max-microvolt = <3300000>; > >>> + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; > >> > >> we don't need to set the pincontroller mux here? > >> > > Will double check on schematic and add it. > >>> + }; > >>> + > >>> + sound: sound { > >>> + compatible = "mediatek,mt8173-rt5650"; > >>> + mediatek,audio-codec = <&rt5650 &hdmi0>; > >>> + mediatek,platform = <&afe>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&aud_i2s2>; > >>> + > >>> + mediatek,mclk = <1>; > >>> + codec-capture { > >>> + sound-dai = <&rt5650 1>; > >>> + }; > >>> + }; > >>> + > >>> + hdmicon: connector { > >>> + compatible = "hdmi-connector"; > >>> + label = "hdmi"; > >>> + type = "a"; > >>> + ddc-i2c-bus = <&hdmiddc0>; > >>> + > >>> + port { > >>> + hdmi_connector_in: endpoint { > >>> + remote-endpoint = <&hdmi0_out>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&cec { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&cpu0 { > >>> + proc-supply = <&mt6397_vpca15_reg>; > >>> +}; > >>> + > >>> +&cpu1 { > >>> + proc-supply = <&mt6397_vpca15_reg>; > >>> +}; > >>> + > >>> +&cpu2 { > >>> + proc-supply = <&da9211_vcpu_reg>; > >>> + sram-supply = <&mt6397_vsramca7_reg>; > >>> +}; > >>> + > >>> +&cpu3 { > >>> + proc-supply = <&da9211_vcpu_reg>; > >>> + sram-supply = <&mt6397_vsramca7_reg>; > >>> +}; > >>> + > >>> +&cpu_thermal { > >>> + sustainable-power = <4500>; /* milliwatts */ > >>> + trips { > >>> + threshold: trip-point@0 { > >>> + temperature = <60000>; > >>> + }; > >>> + > >>> + target: trip-point@1 { > >>> + temperature = <65000>; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&dsi0 { > >>> + status = "okay"; > >>> + ports { > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + port@1 { > >>> + dsi0_out: endpoint { > >>> + remote-endpoint = <&ps8640_in>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&dpi0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&hdmi0 { > >>> + status = "okay"; > >>> + ports { > >>> + port@1 { > >>> + reg = <1>; > >>> + > >>> + hdmi0_out: endpoint { > >>> + remote-endpoint = <&hdmi_connector_in>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&hdmi_phy { > >>> + status = "okay"; > >>> + mediatek,ibias = <0xc>; > >>> +}; > >>> + > >>> +&i2c0 { > >>> + status = "okay"; > >>> + > >>> + rt5650: audio-codec@1a { > >>> + compatible = "realtek,rt5650"; > >>> + reg = <0x1a>; > >>> + avdd-supply = <&mt6397_vgp1_reg>; > >>> + cpvdd-supply = <&mt6397_vcama_reg>; > >> > >> Hm, only defined for "realtek,rt5663", I suppose that's an inconsistency in the > >> binding documentation. Can you please double check? > >> > > This one? https://github.com/torvalds/linux/blob/master/sound/soc/codecs/rt5645.c#L3582 > > > > Yes, I checked myself and send a patch to fix the binding description, which was > missing the two suppliers. > > > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&rt5650_irq>; > >>> + #sound-dai-cells = <1>; > >>> + realtek,dmic1-data-pin = <2>; > >>> + realtek,jd-mode = <2>; > >>> + }; > >>> + > >>> + ps8640: edp-bridge@8 { > >>> + compatible = "parade,ps8640"; > >>> + reg = <0x8>; > >>> + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; > >>> + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&ps8640_pins>; > >>> + vdd12-supply = <&ps8640_fixed_1v2>; > >>> + vdd33-supply = <&mt6397_vgp2_reg>; > >>> + > >>> + ports { > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + port@0 { > >>> + reg = <0>; > >>> + > >>> + ps8640_in: endpoint { > >>> + remote-endpoint = <&dsi0_out>; > >>> + }; > >>> + }; > >>> + > >>> + port@1 { > >>> + reg = <1>; > >>> + > >>> + ps8640_out: endpoint { > >>> + remote-endpoint = <&panel_in>; > >>> + }; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&i2c1 { > >>> + clock-frequency = <1500000>; > >>> + status = "okay"; > >>> + > >>> + da9211: da9211@68 { > >>> + compatible = "dlg,da9211"; > >>> + reg = <0x68>; > >>> + > >> > >> no interrupts? binding description have this stated as required. what happens > >> when the device raises an interrupt? > > Will double check on schematic and add it. > >> > >>> + regulators { > >>> + da9211_vcpu_reg: BUCKA { > >>> + regulator-name = "VBUCKA"; > >>> + regulator-min-microvolt = < 700000>; > >>> + regulator-max-microvolt = <1310000>; > >>> + regulator-min-microamp = <2000000>; > >>> + regulator-max-microamp = <4400000>; > >>> + regulator-ramp-delay = <10000>; > >>> + regulator-always-on; > >>> + regulator-allowed-modes = <0 1>; > >>> + }; > >>> + > >>> + da9211_vgpu_reg: BUCKB { > >>> + regulator-name = "VBUCKB"; > >>> + regulator-min-microvolt = < 700000>; > >>> + regulator-max-microvolt = <1310000>; > >>> + regulator-min-microamp = <2000000>; > >>> + regulator-max-microamp = <3000000>; > >>> + regulator-ramp-delay = <10000>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&i2c2 { > >>> + status = "okay"; > >>> + > >>> + tpm: tpm@20 { > >>> + compatible = "infineon,slb9645tt"; > >>> + reg = <0x20>; > >>> + powered-while-suspended; > >>> + }; > >>> +}; > >>> + > >>> +&i2c3 { > >>> + clock-frequency = <400000>; > >>> + status = "okay"; > >>> + > >>> + touchscreen: touchscreen@10 { > >>> + compatible = "elan,ekth3500"; > >>> + reg = <0x10>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >>> +}; > >>> + > >>> +&i2c4 { > >>> + clock-frequency = <400000>; > >>> + status = "okay"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&trackpad_irq>; > >> > >> Why not move the pinctrl properties into the trackpad node? > >> > > As second source trackpad device and original device shares same > > compatible string (rev id), we need to add 2nd trackpad node here. > > According to previous log (since I don't have a second source trackpad > > device to test), adding pinctrl in each trackpad node, there would be > > error: > > [ 0.643501] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin URXD3 > > already requested by 7-0015; cannot claim for 7-002c > > [ 0.643525] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin-117 > > (7-002c) status -22 > > [ 0.643548] mediatek-mt8173-pinctrl 1000b000.pinctrl: could not > > request pin 117 (URXD3) from group URXD3 on device 1000b000.pinctrl > > [ 0.643568] i2c_hid 7-002c: Error applying setting, reverse things back > > [ 0.643867] i2c 7-002c: Driver i2c_hid requests probe deferral > > > > > > I think we can fix this, if we create the aforementioned two board DTS files. > Correct? > > >>> + > >>> + trackpad: trackpad@15 { > >>> + compatible = "elan,ekth3000"; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > >>> + reg = <0x15>; > >>> + vcc-supply = <&mt6397_vgp6_reg>; > >>> + wakeup-source; > >>> + }; > >>> +}; > >>> + > >>> +&mipi_tx0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&mmc0 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc0_pins_default>; > >>> + pinctrl-1 = <&mmc0_pins_uhs>; > >>> + bus-width = <8>; > >>> + max-frequency = <200000000>; > >>> + cap-mmc-highspeed; > >>> + mmc-hs200-1_8v; > >>> + mmc-hs400-1_8v; > >>> + cap-mmc-hw-reset; > >>> + hs400-ds-delay = <0x14015>; > >>> + mediatek,hs200-cmd-int-delay=<30>; > >>> + mediatek,hs400-cmd-int-delay=<14>; > >>> + mediatek,hs400-cmd-resp-sel-rising; > >>> + vmmc-supply = <&mt6397_vemc_3v3_reg>; > >>> + vqmmc-supply = <&mt6397_vio18_reg>; > >>> + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; > >>> + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; > >>> + non-removable; > >>> +}; > >>> + > >>> +&mmc1 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc1_pins_default>; > >>> + pinctrl-1 = <&mmc1_pins_uhs>; > >>> + bus-width = <4>; > >>> + max-frequency = <200000000>; > >>> + cap-sd-highspeed; > >>> + sd-uhs-sdr50; > >>> + sd-uhs-sdr104; > >>> + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; > >>> + vmmc-supply = <&mt6397_vmch_reg>; > >>> + vqmmc-supply = <&mt6397_vmc_reg>; > >>> +}; > >>> + > >>> +&mmc3 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc3_pins_default>; > >>> + pinctrl-1 = <&mmc3_pins_uhs>; > >>> + bus-width = <4>; > >>> + max-frequency = <200000000>; > >>> + cap-sd-highspeed; > >>> + sd-uhs-sdr50; > >>> + sd-uhs-sdr104; > >>> + sdr104-clk-delay = <5>; > >> > >> Not an upstream property, please delete it. > >> > >>> + keep-power-in-suspend; > >>> + enable-sdio-wakeup; > >>> + cap-sdio-irq; > >>> + vmmc-supply = <&sdio_fixed_3v3>; > >>> + vqmmc-supply = <&mt6397_vgp3_reg>; > >>> + non-removable; > >>> + cap-power-off-card; > >>> + > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + btmrvl: btmrvl@2 { > >>> + compatible = "marvell,sd8897-bt"; > >>> + reg = <2>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; > >>> + marvell,wakeup-pin = /bits/ 16 <0x0d>; > >>> + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; > >>> + }; > >>> + > >>> + mwifiex: mwifiex@1 { > >>> + compatible = "marvell,sd8897"; > >>> + reg = <1>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; > >>> + marvell,wakeup-pin = <3>; > >>> + marvell,caldata_ed_mac = /bits/ 8 < > >>> +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > >>> +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > >>> + >; > >> > >> Not an upstream property, please delete. > >> > >>> + }; > >>> +}; > >>> + > >>> +&nor_flash { > >>> + status = "okay"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&nor_gpio1_pins>; > >>> + bus-width = <8>; > >>> + max-frequency = <50000000>; > >>> + non-removable; > >>> + flash@0 { > >>> + compatible = "jedec,spi-nor"; > >>> + reg = <0>; > >>> + }; > >>> +}; > >>> + > >>> +&pio { > >>> + aud_i2s2: aud_i2s2 { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, > >>> + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, > >>> + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, > >>> + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, > >>> + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, > >>> + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, > >>> + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; > >>> + bias-pull-down; > >>> + }; > >>> + }; > >>> + > >>> + bl_fixed_pins: bl_fixed_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + bt_wake_pins: bt_wake_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + disp_pwm0_pins: disp_pwm0_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + gpio_keys_pins: gpio_keys_pins { > >>> + volume_pins { > >>> + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, > >>> + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + tablet_mode_pins { > >>> + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + hdmi_mux_pins: hdmi_mux_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; > >>> + }; > >>> + }; > >>> + > >>> + mmc0_pins_default: mmc0default { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > >>> + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > >>> + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > >>> + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > >>> + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > >>> + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > >>> + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > >>> + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > >>> + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > >>> + bias-pull-down; > >> > >> identation. > >> > >>> + }; > >>> + > >>> + pins_rst { > >>> + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_default: mmc1default { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > >>> + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > >>> + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > >>> + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > >>> + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > >>> + bias-pull-down; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + }; > >>> + > >>> + pins_insert { > >>> + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc3_pins_default: mmc3default { > >>> + pins_dat { > >>> + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > >>> + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > >>> + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > >>> + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_cmd { > >>> + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > >>> + bias-pull-down; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + }; > >>> + > >>> + pins_pdn { > >>> + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + mmc0_pins_uhs: mmc0 { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > >>> + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > >>> + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > >>> + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > >>> + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > >>> + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > >>> + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > >>> + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > >>> + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_6mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > >>> + drive-strength = <MTK_DRIVE_6mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > >>> + }; > >>> + > >>> + pins_ds { > >>> + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; > >>> + drive-strength = <MTK_DRIVE_10mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > >>> + }; > >>> + > >>> + pins_rst { > >>> + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_uhs: mmc1 { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > >>> + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > >>> + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > >>> + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > >>> + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_6mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + }; > >>> + > >>> + mmc3_pins_uhs: mmc3 { > >>> + pins_dat { > >>> + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > >>> + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > >>> + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > >>> + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_cmd { > >>> + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + }; > >>> + > >>> + nor_gpio1_pins: nor { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, > >>> + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, > >>> + <MT8173_PIN_8_EINT8__FUNC_SFIN>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins2 { > >>> + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + panel_fixed_pins: panel_fixed_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; > >>> + }; > >>> + }; > >>> + > >>> + ps8640_pins: ps8640_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, > >>> + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, > >>> + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; > >>> + }; > >>> + }; > >>> + > >>> + ps8640_fixed_pins: ps8640_fixed_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; > >>> + }; > >>> + }; > >>> + > >>> + rt5650_irq: rt5650_irq { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; > >>> + bias-pull-down; > >>> + }; > >>> + }; > >>> + > >>> + spi_pins_a: spi1 { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_spi { > >>> + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, > >>> + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, > >>> + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, > >>> + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; > >>> + bias-disable; > >>> + }; > >>> + }; > >>> + > >>> + trackpad_irq: trackpad_irq { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; > >>> + input-enable; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + usb_pins: usb@0 { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; > >>> + output-high; > >>> + bias-disable; > >>> + }; > >>> + }; > >>> + > >>> + wifi_wake_pins: wifi_wake_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&pwm0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&pwrap { > >>> + pmic: mt6397 { > >>> + compatible = "mediatek,mt6397"; > >>> + #address-cells = <1>; > >>> + #size-cells = <1>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > >>> + interrupt-controller; > >>> + #interrupt-cells = <2>; > >>> + > >>> + mt6397rtc: mt6397rtc { > >> > >> AFAIK this should be > >> rtc: mt6397rtc { > >> > >> Please fix that for all subnodes. > >> > > Will fix in next version > >>> + compatible = "mediatek,mt6397-rtc"; > >>> + }; > >>> + > >>> + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { > >>> + compatible = "mediatek,mt6397-pctl-pmic-syscfg", > >>> + "syscon"; > >>> + reg = <0 0x0000c000 0 0x0108>; > >> > >> not an upstream compatible, please delete the node. > >> > > I think my comment was not correct. I'll have to dig more to understand why we > have a compatible without a binding description. > > Regards, > Matthias ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board @ 2020-01-14 15:33 ` Hsin-Yi Wang 0 siblings, 0 replies; 42+ messages in thread From: Hsin-Yi Wang @ 2020-01-14 15:33 UTC (permalink / raw) To: Matthias Brugger Cc: Mark Rutland, Devicetree List, Nicolas Boichat, lkml, Daniel Kurtz, Rob Herring, linux-mediatek, Enric Balletbo i Serra, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Tue, Jan 14, 2020 at 11:10 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: > > > > On 13/01/2020 19:01, Hsin-Yi Wang wrote: > > On Fri, Jan 10, 2020 at 9:42 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: > >> > >> > > Thanks, I will address the comments and send next version > >> > >> On 10/01/2020 08:37, Hsin-Yi Wang wrote: > >>> Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > >>> SoC. > >>> > >>> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > >>> --- > >>> Changes in v2: > >>> - remove downstream nodes and unused nodes > >>> - use GPIO_ACTIVE_LOW for ps8640 gpios > >>> - move trackpad to hana > >>> --- > >>> arch/arm64/boot/dts/mediatek/Makefile | 3 + > >>> .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > >>> .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > >>> .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > >>> arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > >>> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > >>> 6 files changed, 1161 insertions(+) > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> > >>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > >>> index 458bbc422a94..b45a45a565a1 100644 > >>> --- a/arch/arm64/boot/dts/mediatek/Makefile > >>> +++ b/arch/arm64/boot/dts/mediatek/Makefile > >>> @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> new file mode 100644 > >>> index 000000000000..a3616bc3d859 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> @@ -0,0 +1,27 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2019 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm-hana.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Hana rev7 board"; > >>> + compatible = "google,hana-rev7", "mediatek,mt8173"; > >>> +}; > >>> + > >>> +&cpu_thermal { > >>> + trips { > >>> + cpu_crit: cpu_crit@0 { > >>> + temperature = <100000>; > >>> + type = "critical"; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&gpio_keys { > >>> + /delete-node/tablet_mode; > >>> + /delete-node/volume_down; > >>> + /delete-node/volume_up; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> new file mode 100644 > >>> index 000000000000..8cbcc75192e3 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> @@ -0,0 +1,16 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm-hana.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Hana rev0 board"; > > If we can't make this more verbose, at least delete rev0, that's confusing. > Should the name not be "Google Hana"? > Sure, Google Hana makes sense. > >>> + compatible = "google,hana-rev6", > >>> + "google,hana-rev5", "google,hana-rev4", > >>> + "google,hana-rev3", "google,hana-rev2", > >>> + "google,hana-rev1", "google,hana-rev0", > >>> + "google,hana", "mediatek,mt8173"; > >>> +}; > >> > >> I'm a bit confused about all this versions. Do you want to keep them for > >> internal use, as I suppose only rev6 is available to the general public, > >> correct? I'm fine with keeping the old revisions if that's of use for you, > >> otherwise I'd prefer to delete them. > > According to internal feedback system, at least rev3, rev6, rev7 are > > in general public. I can delete rev0~rev2, since they are earlier > > version device. > > If you don't plan to use the rev0 to rev2 in-house, then we can delete them. > > >> > >> Model name could be more verbose. > >> > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> new file mode 100644 > >>> index 000000000000..35e12b290947 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> @@ -0,0 +1,60 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +#include "mt8173-elm.dtsi" > >>> + > >>> +&i2c0 { > >>> + clock-frequency = <200000>; > >>> +}; > >>> + > >>> +&i2c3 { > >>> + touchscreen2: touchscreen@34 { > >>> + compatible = "melfas,mip4_ts"; > >>> + reg = <0x34>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >>> + > >>> + touchscreen3: touchscreen@20 { > >>> + compatible = "hid-over-i2c"; > >>> + reg = <0x20>; > >>> + hid-descr-addr = <0x0020>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >> > >> In v1 you mentioned: > >> "Partners wants to increase touchpad and touchscreen source (they choose > >> synaptics) for hana 300e, and synaptics uses hid-over-i2c driver." > >> > >> So the partner uses the same compatible (google,hana-rev6?) for both devices? > >> > > Confirmed with others, second source devices share same compatible. > > We should create independent dts for the different boards. Like it is done for > gru-scarlett. Doesn't the FW provide the sku number in the compatible string? > Since I don't have a second source device to verify, I checked with SIE, and he said the sku number(board id) are same for device using original trackpad and second source trackpad in hana's case. So I don't think we can split them to independent dts. > >>> +}; > >>> + > >>> +&i2c4 { > >>> + trackpad2: trackpad@2c { > >>> + compatible = "hid-over-i2c"; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > >>> + reg = <0x2c>; > >>> + hid-descr-addr = <0x0020>; > >>> + wakeup-source; > >>> + }; > >>> +}; > >>> + > >>> +&mmc1 { > >>> + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; > >>> +}; > >>> + > >>> +&pio { > >>> + hdmi_mux_pins: hdmi_mux_pins { > >>> + pins2 { > >>> + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; > >>> + bias-pull-up; > >>> + output-high; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_default: mmc1default { > >>> + pins_wp { > >>> + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; > >>> + input-enable; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> new file mode 100644 > >>> index 000000000000..e5da2355760e > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> @@ -0,0 +1,15 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Elm board"; > >>> + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", > >>> + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", > >>> + "google,elm-rev2", "google,elm-rev1", > >>> + "google,elm", "mediatek,mt8173"; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> new file mode 100644 > >>> index 000000000000..2ac738bebe04 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> @@ -0,0 +1,1040 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +#include <dt-bindings/input/input.h> > >>> +#include <dt-bindings/gpio/gpio.h> > >>> +#include "mt8173.dtsi" > >>> + > >>> +/ { > >>> + aliases { > >>> + serial0 = &uart0; > >>> + serial1 = &uart1; > >>> + serial2 = &uart2; > >>> + serial3 = &uart3; > >>> + }; > >>> + > >>> + memory@40000000 { > >>> + device_type = "memory"; > >>> + reg = <0 0x40000000 0 0x80000000>; > >>> + }; > >>> + > >>> + backlight_lcd: backlight_lcd { > >>> + compatible = "pwm-backlight"; > >>> + pwms = <&pwm0 0 1000000>; > >>> + brightness-levels = < > >>> + 0 16 32 48 64 80 96 112 > >>> + 128 144 160 176 192 208 224 240 > >>> + 255 > >>> + >; > >>> + default-brightness-level = <9>; > >>> + power-supply = <&bl_fixed_reg>; > >>> + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; > >>> + > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&disp_pwm0_pins>; > >>> + status = "okay"; > >>> + }; > >>> + > >>> + bl_fixed_reg: fixedregulator@2 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "bl_fixed"; > >>> + regulator-min-microvolt = <1800000>; > >>> + regulator-max-microvolt = <1800000>; > >>> + startup-delay-us = <1000>; > >>> + enable-active-high; > >>> + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&bl_fixed_pins>; > >>> + }; > >>> + > >>> + chosen { > >>> + stdout-path = &uart0; > >>> + }; > >>> + > >>> + gpio_keys: gpio-keys { > >>> + compatible = "gpio-keys"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&gpio_keys_pins>; > >>> + > >>> + lid { > >>> + label = "Lid"; > >>> + gpios = <&pio 69 GPIO_ACTIVE_LOW>; > >>> + linux,code = <0>; /* SW_LID */ > >>> + linux,input-type = <5>; /* EV_SW */ > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + power { > >>> + label = "Power"; > >>> + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; > >>> + linux,code = <KEY_POWER>; > >>> + debounce-interval = <30>; > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + tablet_mode { > >>> + label = "Tablet_mode"; > >>> + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; > >>> + linux,code = <1>; /* SW_TABLET_MODE */ > >> > >> can't we use SW_TABLET_MODE fomr linux-event-codes.h? > >> > > Will fix this. > >>> + linux,input-type = <5>; /* EV_SW */ > >> > >> same here. > >> > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + volume_down { > >>> + label = "Volume_down"; > >>> + gpios = <&pio 123 GPIO_ACTIVE_LOW>; > >>> + linux,code = <KEY_VOLUMEDOWN>; > >>> + }; > >>> + > >>> + volume_up { > >>> + label = "Volume_up"; > >>> + gpios = <&pio 124 GPIO_ACTIVE_LOW>; > >>> + linux,code = <KEY_VOLUMEUP>; > >>> + }; > >>> + }; > >>> + > >>> + panel: panel { > >>> + compatible = "lg,lp120up1"; > >>> + power-supply = <&panel_fixed_3v3>; > >>> + ddc-i2c-bus = <&i2c0>; > >>> + backlight = <&backlight_lcd>; > >>> + > >>> + port { > >>> + panel_in: endpoint { > >>> + remote-endpoint = <&ps8640_out>; > >>> + }; > >>> + }; > >>> + }; > >>> + > >>> + panel_fixed_3v3: regulator@1 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "PANEL_3V3"; > >>> + regulator-min-microvolt = <3300000>; > >>> + regulator-max-microvolt = <3300000>; > >>> + enable-active-high; > >>> + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&panel_fixed_pins>; > >>> + }; > >>> + > >>> + ps8640_fixed_1v2: regulator@2 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "PS8640_1V2"; > >>> + regulator-min-microvolt = <1200000>; > >>> + regulator-max-microvolt = <1200000>; > >>> + regulator-enable-ramp-delay = <2000>; > >>> + enable-active-high; > >>> + regulator-boot-on; > >>> + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&ps8640_fixed_pins>; > >>> + }; > >>> + > >>> + sdio_fixed_3v3: fixedregulator@0 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "3V3"; > >>> + regulator-min-microvolt = <3300000>; > >>> + regulator-max-microvolt = <3300000>; > >>> + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; > >> > >> we don't need to set the pincontroller mux here? > >> > > Will double check on schematic and add it. > >>> + }; > >>> + > >>> + sound: sound { > >>> + compatible = "mediatek,mt8173-rt5650"; > >>> + mediatek,audio-codec = <&rt5650 &hdmi0>; > >>> + mediatek,platform = <&afe>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&aud_i2s2>; > >>> + > >>> + mediatek,mclk = <1>; > >>> + codec-capture { > >>> + sound-dai = <&rt5650 1>; > >>> + }; > >>> + }; > >>> + > >>> + hdmicon: connector { > >>> + compatible = "hdmi-connector"; > >>> + label = "hdmi"; > >>> + type = "a"; > >>> + ddc-i2c-bus = <&hdmiddc0>; > >>> + > >>> + port { > >>> + hdmi_connector_in: endpoint { > >>> + remote-endpoint = <&hdmi0_out>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&cec { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&cpu0 { > >>> + proc-supply = <&mt6397_vpca15_reg>; > >>> +}; > >>> + > >>> +&cpu1 { > >>> + proc-supply = <&mt6397_vpca15_reg>; > >>> +}; > >>> + > >>> +&cpu2 { > >>> + proc-supply = <&da9211_vcpu_reg>; > >>> + sram-supply = <&mt6397_vsramca7_reg>; > >>> +}; > >>> + > >>> +&cpu3 { > >>> + proc-supply = <&da9211_vcpu_reg>; > >>> + sram-supply = <&mt6397_vsramca7_reg>; > >>> +}; > >>> + > >>> +&cpu_thermal { > >>> + sustainable-power = <4500>; /* milliwatts */ > >>> + trips { > >>> + threshold: trip-point@0 { > >>> + temperature = <60000>; > >>> + }; > >>> + > >>> + target: trip-point@1 { > >>> + temperature = <65000>; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&dsi0 { > >>> + status = "okay"; > >>> + ports { > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + port@1 { > >>> + dsi0_out: endpoint { > >>> + remote-endpoint = <&ps8640_in>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&dpi0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&hdmi0 { > >>> + status = "okay"; > >>> + ports { > >>> + port@1 { > >>> + reg = <1>; > >>> + > >>> + hdmi0_out: endpoint { > >>> + remote-endpoint = <&hdmi_connector_in>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&hdmi_phy { > >>> + status = "okay"; > >>> + mediatek,ibias = <0xc>; > >>> +}; > >>> + > >>> +&i2c0 { > >>> + status = "okay"; > >>> + > >>> + rt5650: audio-codec@1a { > >>> + compatible = "realtek,rt5650"; > >>> + reg = <0x1a>; > >>> + avdd-supply = <&mt6397_vgp1_reg>; > >>> + cpvdd-supply = <&mt6397_vcama_reg>; > >> > >> Hm, only defined for "realtek,rt5663", I suppose that's an inconsistency in the > >> binding documentation. Can you please double check? > >> > > This one? https://github.com/torvalds/linux/blob/master/sound/soc/codecs/rt5645.c#L3582 > > > > Yes, I checked myself and send a patch to fix the binding description, which was > missing the two suppliers. > > > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&rt5650_irq>; > >>> + #sound-dai-cells = <1>; > >>> + realtek,dmic1-data-pin = <2>; > >>> + realtek,jd-mode = <2>; > >>> + }; > >>> + > >>> + ps8640: edp-bridge@8 { > >>> + compatible = "parade,ps8640"; > >>> + reg = <0x8>; > >>> + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; > >>> + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&ps8640_pins>; > >>> + vdd12-supply = <&ps8640_fixed_1v2>; > >>> + vdd33-supply = <&mt6397_vgp2_reg>; > >>> + > >>> + ports { > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + port@0 { > >>> + reg = <0>; > >>> + > >>> + ps8640_in: endpoint { > >>> + remote-endpoint = <&dsi0_out>; > >>> + }; > >>> + }; > >>> + > >>> + port@1 { > >>> + reg = <1>; > >>> + > >>> + ps8640_out: endpoint { > >>> + remote-endpoint = <&panel_in>; > >>> + }; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&i2c1 { > >>> + clock-frequency = <1500000>; > >>> + status = "okay"; > >>> + > >>> + da9211: da9211@68 { > >>> + compatible = "dlg,da9211"; > >>> + reg = <0x68>; > >>> + > >> > >> no interrupts? binding description have this stated as required. what happens > >> when the device raises an interrupt? > > Will double check on schematic and add it. > >> > >>> + regulators { > >>> + da9211_vcpu_reg: BUCKA { > >>> + regulator-name = "VBUCKA"; > >>> + regulator-min-microvolt = < 700000>; > >>> + regulator-max-microvolt = <1310000>; > >>> + regulator-min-microamp = <2000000>; > >>> + regulator-max-microamp = <4400000>; > >>> + regulator-ramp-delay = <10000>; > >>> + regulator-always-on; > >>> + regulator-allowed-modes = <0 1>; > >>> + }; > >>> + > >>> + da9211_vgpu_reg: BUCKB { > >>> + regulator-name = "VBUCKB"; > >>> + regulator-min-microvolt = < 700000>; > >>> + regulator-max-microvolt = <1310000>; > >>> + regulator-min-microamp = <2000000>; > >>> + regulator-max-microamp = <3000000>; > >>> + regulator-ramp-delay = <10000>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&i2c2 { > >>> + status = "okay"; > >>> + > >>> + tpm: tpm@20 { > >>> + compatible = "infineon,slb9645tt"; > >>> + reg = <0x20>; > >>> + powered-while-suspended; > >>> + }; > >>> +}; > >>> + > >>> +&i2c3 { > >>> + clock-frequency = <400000>; > >>> + status = "okay"; > >>> + > >>> + touchscreen: touchscreen@10 { > >>> + compatible = "elan,ekth3500"; > >>> + reg = <0x10>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >>> +}; > >>> + > >>> +&i2c4 { > >>> + clock-frequency = <400000>; > >>> + status = "okay"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&trackpad_irq>; > >> > >> Why not move the pinctrl properties into the trackpad node? > >> > > As second source trackpad device and original device shares same > > compatible string (rev id), we need to add 2nd trackpad node here. > > According to previous log (since I don't have a second source trackpad > > device to test), adding pinctrl in each trackpad node, there would be > > error: > > [ 0.643501] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin URXD3 > > already requested by 7-0015; cannot claim for 7-002c > > [ 0.643525] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin-117 > > (7-002c) status -22 > > [ 0.643548] mediatek-mt8173-pinctrl 1000b000.pinctrl: could not > > request pin 117 (URXD3) from group URXD3 on device 1000b000.pinctrl > > [ 0.643568] i2c_hid 7-002c: Error applying setting, reverse things back > > [ 0.643867] i2c 7-002c: Driver i2c_hid requests probe deferral > > > > > > I think we can fix this, if we create the aforementioned two board DTS files. > Correct? > > >>> + > >>> + trackpad: trackpad@15 { > >>> + compatible = "elan,ekth3000"; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > >>> + reg = <0x15>; > >>> + vcc-supply = <&mt6397_vgp6_reg>; > >>> + wakeup-source; > >>> + }; > >>> +}; > >>> + > >>> +&mipi_tx0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&mmc0 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc0_pins_default>; > >>> + pinctrl-1 = <&mmc0_pins_uhs>; > >>> + bus-width = <8>; > >>> + max-frequency = <200000000>; > >>> + cap-mmc-highspeed; > >>> + mmc-hs200-1_8v; > >>> + mmc-hs400-1_8v; > >>> + cap-mmc-hw-reset; > >>> + hs400-ds-delay = <0x14015>; > >>> + mediatek,hs200-cmd-int-delay=<30>; > >>> + mediatek,hs400-cmd-int-delay=<14>; > >>> + mediatek,hs400-cmd-resp-sel-rising; > >>> + vmmc-supply = <&mt6397_vemc_3v3_reg>; > >>> + vqmmc-supply = <&mt6397_vio18_reg>; > >>> + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; > >>> + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; > >>> + non-removable; > >>> +}; > >>> + > >>> +&mmc1 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc1_pins_default>; > >>> + pinctrl-1 = <&mmc1_pins_uhs>; > >>> + bus-width = <4>; > >>> + max-frequency = <200000000>; > >>> + cap-sd-highspeed; > >>> + sd-uhs-sdr50; > >>> + sd-uhs-sdr104; > >>> + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; > >>> + vmmc-supply = <&mt6397_vmch_reg>; > >>> + vqmmc-supply = <&mt6397_vmc_reg>; > >>> +}; > >>> + > >>> +&mmc3 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc3_pins_default>; > >>> + pinctrl-1 = <&mmc3_pins_uhs>; > >>> + bus-width = <4>; > >>> + max-frequency = <200000000>; > >>> + cap-sd-highspeed; > >>> + sd-uhs-sdr50; > >>> + sd-uhs-sdr104; > >>> + sdr104-clk-delay = <5>; > >> > >> Not an upstream property, please delete it. > >> > >>> + keep-power-in-suspend; > >>> + enable-sdio-wakeup; > >>> + cap-sdio-irq; > >>> + vmmc-supply = <&sdio_fixed_3v3>; > >>> + vqmmc-supply = <&mt6397_vgp3_reg>; > >>> + non-removable; > >>> + cap-power-off-card; > >>> + > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + btmrvl: btmrvl@2 { > >>> + compatible = "marvell,sd8897-bt"; > >>> + reg = <2>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; > >>> + marvell,wakeup-pin = /bits/ 16 <0x0d>; > >>> + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; > >>> + }; > >>> + > >>> + mwifiex: mwifiex@1 { > >>> + compatible = "marvell,sd8897"; > >>> + reg = <1>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; > >>> + marvell,wakeup-pin = <3>; > >>> + marvell,caldata_ed_mac = /bits/ 8 < > >>> +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > >>> +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > >>> + >; > >> > >> Not an upstream property, please delete. > >> > >>> + }; > >>> +}; > >>> + > >>> +&nor_flash { > >>> + status = "okay"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&nor_gpio1_pins>; > >>> + bus-width = <8>; > >>> + max-frequency = <50000000>; > >>> + non-removable; > >>> + flash@0 { > >>> + compatible = "jedec,spi-nor"; > >>> + reg = <0>; > >>> + }; > >>> +}; > >>> + > >>> +&pio { > >>> + aud_i2s2: aud_i2s2 { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, > >>> + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, > >>> + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, > >>> + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, > >>> + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, > >>> + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, > >>> + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; > >>> + bias-pull-down; > >>> + }; > >>> + }; > >>> + > >>> + bl_fixed_pins: bl_fixed_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + bt_wake_pins: bt_wake_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + disp_pwm0_pins: disp_pwm0_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + gpio_keys_pins: gpio_keys_pins { > >>> + volume_pins { > >>> + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, > >>> + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + tablet_mode_pins { > >>> + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + hdmi_mux_pins: hdmi_mux_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; > >>> + }; > >>> + }; > >>> + > >>> + mmc0_pins_default: mmc0default { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > >>> + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > >>> + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > >>> + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > >>> + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > >>> + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > >>> + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > >>> + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > >>> + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > >>> + bias-pull-down; > >> > >> identation. > >> > >>> + }; > >>> + > >>> + pins_rst { > >>> + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_default: mmc1default { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > >>> + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > >>> + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > >>> + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > >>> + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > >>> + bias-pull-down; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + }; > >>> + > >>> + pins_insert { > >>> + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc3_pins_default: mmc3default { > >>> + pins_dat { > >>> + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > >>> + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > >>> + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > >>> + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_cmd { > >>> + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > >>> + bias-pull-down; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + }; > >>> + > >>> + pins_pdn { > >>> + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + mmc0_pins_uhs: mmc0 { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > >>> + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > >>> + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > >>> + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > >>> + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > >>> + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > >>> + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > >>> + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > >>> + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_6mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > >>> + drive-strength = <MTK_DRIVE_6mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > >>> + }; > >>> + > >>> + pins_ds { > >>> + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; > >>> + drive-strength = <MTK_DRIVE_10mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > >>> + }; > >>> + > >>> + pins_rst { > >>> + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_uhs: mmc1 { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > >>> + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > >>> + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > >>> + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > >>> + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_6mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + }; > >>> + > >>> + mmc3_pins_uhs: mmc3 { > >>> + pins_dat { > >>> + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > >>> + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > >>> + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > >>> + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_cmd { > >>> + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + }; > >>> + > >>> + nor_gpio1_pins: nor { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, > >>> + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, > >>> + <MT8173_PIN_8_EINT8__FUNC_SFIN>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins2 { > >>> + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + panel_fixed_pins: panel_fixed_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; > >>> + }; > >>> + }; > >>> + > >>> + ps8640_pins: ps8640_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, > >>> + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, > >>> + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; > >>> + }; > >>> + }; > >>> + > >>> + ps8640_fixed_pins: ps8640_fixed_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; > >>> + }; > >>> + }; > >>> + > >>> + rt5650_irq: rt5650_irq { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; > >>> + bias-pull-down; > >>> + }; > >>> + }; > >>> + > >>> + spi_pins_a: spi1 { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_spi { > >>> + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, > >>> + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, > >>> + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, > >>> + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; > >>> + bias-disable; > >>> + }; > >>> + }; > >>> + > >>> + trackpad_irq: trackpad_irq { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; > >>> + input-enable; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + usb_pins: usb@0 { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; > >>> + output-high; > >>> + bias-disable; > >>> + }; > >>> + }; > >>> + > >>> + wifi_wake_pins: wifi_wake_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&pwm0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&pwrap { > >>> + pmic: mt6397 { > >>> + compatible = "mediatek,mt6397"; > >>> + #address-cells = <1>; > >>> + #size-cells = <1>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > >>> + interrupt-controller; > >>> + #interrupt-cells = <2>; > >>> + > >>> + mt6397rtc: mt6397rtc { > >> > >> AFAIK this should be > >> rtc: mt6397rtc { > >> > >> Please fix that for all subnodes. > >> > > Will fix in next version > >>> + compatible = "mediatek,mt6397-rtc"; > >>> + }; > >>> + > >>> + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { > >>> + compatible = "mediatek,mt6397-pctl-pmic-syscfg", > >>> + "syscon"; > >>> + reg = <0 0x0000c000 0 0x0108>; > >> > >> not an upstream compatible, please delete the node. > >> > > I think my comment was not correct. I'll have to dig more to understand why we > have a compatible without a binding description. > > Regards, > Matthias _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board @ 2020-01-14 15:33 ` Hsin-Yi Wang 0 siblings, 0 replies; 42+ messages in thread From: Hsin-Yi Wang @ 2020-01-14 15:33 UTC (permalink / raw) To: Matthias Brugger Cc: Mark Rutland, Devicetree List, Nicolas Boichat, lkml, Rob Herring, linux-mediatek, Enric Balletbo i Serra, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Tue, Jan 14, 2020 at 11:10 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: > > > > On 13/01/2020 19:01, Hsin-Yi Wang wrote: > > On Fri, Jan 10, 2020 at 9:42 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: > >> > >> > > Thanks, I will address the comments and send next version > >> > >> On 10/01/2020 08:37, Hsin-Yi Wang wrote: > >>> Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > >>> SoC. > >>> > >>> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > >>> --- > >>> Changes in v2: > >>> - remove downstream nodes and unused nodes > >>> - use GPIO_ACTIVE_LOW for ps8640 gpios > >>> - move trackpad to hana > >>> --- > >>> arch/arm64/boot/dts/mediatek/Makefile | 3 + > >>> .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > >>> .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > >>> .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > >>> arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > >>> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > >>> 6 files changed, 1161 insertions(+) > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> > >>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > >>> index 458bbc422a94..b45a45a565a1 100644 > >>> --- a/arch/arm64/boot/dts/mediatek/Makefile > >>> +++ b/arch/arm64/boot/dts/mediatek/Makefile > >>> @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> new file mode 100644 > >>> index 000000000000..a3616bc3d859 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> @@ -0,0 +1,27 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2019 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm-hana.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Hana rev7 board"; > >>> + compatible = "google,hana-rev7", "mediatek,mt8173"; > >>> +}; > >>> + > >>> +&cpu_thermal { > >>> + trips { > >>> + cpu_crit: cpu_crit@0 { > >>> + temperature = <100000>; > >>> + type = "critical"; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&gpio_keys { > >>> + /delete-node/tablet_mode; > >>> + /delete-node/volume_down; > >>> + /delete-node/volume_up; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> new file mode 100644 > >>> index 000000000000..8cbcc75192e3 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> @@ -0,0 +1,16 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm-hana.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Hana rev0 board"; > > If we can't make this more verbose, at least delete rev0, that's confusing. > Should the name not be "Google Hana"? > Sure, Google Hana makes sense. > >>> + compatible = "google,hana-rev6", > >>> + "google,hana-rev5", "google,hana-rev4", > >>> + "google,hana-rev3", "google,hana-rev2", > >>> + "google,hana-rev1", "google,hana-rev0", > >>> + "google,hana", "mediatek,mt8173"; > >>> +}; > >> > >> I'm a bit confused about all this versions. Do you want to keep them for > >> internal use, as I suppose only rev6 is available to the general public, > >> correct? I'm fine with keeping the old revisions if that's of use for you, > >> otherwise I'd prefer to delete them. > > According to internal feedback system, at least rev3, rev6, rev7 are > > in general public. I can delete rev0~rev2, since they are earlier > > version device. > > If you don't plan to use the rev0 to rev2 in-house, then we can delete them. > > >> > >> Model name could be more verbose. > >> > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> new file mode 100644 > >>> index 000000000000..35e12b290947 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> @@ -0,0 +1,60 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +#include "mt8173-elm.dtsi" > >>> + > >>> +&i2c0 { > >>> + clock-frequency = <200000>; > >>> +}; > >>> + > >>> +&i2c3 { > >>> + touchscreen2: touchscreen@34 { > >>> + compatible = "melfas,mip4_ts"; > >>> + reg = <0x34>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >>> + > >>> + touchscreen3: touchscreen@20 { > >>> + compatible = "hid-over-i2c"; > >>> + reg = <0x20>; > >>> + hid-descr-addr = <0x0020>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >> > >> In v1 you mentioned: > >> "Partners wants to increase touchpad and touchscreen source (they choose > >> synaptics) for hana 300e, and synaptics uses hid-over-i2c driver." > >> > >> So the partner uses the same compatible (google,hana-rev6?) for both devices? > >> > > Confirmed with others, second source devices share same compatible. > > We should create independent dts for the different boards. Like it is done for > gru-scarlett. Doesn't the FW provide the sku number in the compatible string? > Since I don't have a second source device to verify, I checked with SIE, and he said the sku number(board id) are same for device using original trackpad and second source trackpad in hana's case. So I don't think we can split them to independent dts. > >>> +}; > >>> + > >>> +&i2c4 { > >>> + trackpad2: trackpad@2c { > >>> + compatible = "hid-over-i2c"; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > >>> + reg = <0x2c>; > >>> + hid-descr-addr = <0x0020>; > >>> + wakeup-source; > >>> + }; > >>> +}; > >>> + > >>> +&mmc1 { > >>> + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; > >>> +}; > >>> + > >>> +&pio { > >>> + hdmi_mux_pins: hdmi_mux_pins { > >>> + pins2 { > >>> + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; > >>> + bias-pull-up; > >>> + output-high; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_default: mmc1default { > >>> + pins_wp { > >>> + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; > >>> + input-enable; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> new file mode 100644 > >>> index 000000000000..e5da2355760e > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> @@ -0,0 +1,15 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Elm board"; > >>> + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", > >>> + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", > >>> + "google,elm-rev2", "google,elm-rev1", > >>> + "google,elm", "mediatek,mt8173"; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> new file mode 100644 > >>> index 000000000000..2ac738bebe04 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> @@ -0,0 +1,1040 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +#include <dt-bindings/input/input.h> > >>> +#include <dt-bindings/gpio/gpio.h> > >>> +#include "mt8173.dtsi" > >>> + > >>> +/ { > >>> + aliases { > >>> + serial0 = &uart0; > >>> + serial1 = &uart1; > >>> + serial2 = &uart2; > >>> + serial3 = &uart3; > >>> + }; > >>> + > >>> + memory@40000000 { > >>> + device_type = "memory"; > >>> + reg = <0 0x40000000 0 0x80000000>; > >>> + }; > >>> + > >>> + backlight_lcd: backlight_lcd { > >>> + compatible = "pwm-backlight"; > >>> + pwms = <&pwm0 0 1000000>; > >>> + brightness-levels = < > >>> + 0 16 32 48 64 80 96 112 > >>> + 128 144 160 176 192 208 224 240 > >>> + 255 > >>> + >; > >>> + default-brightness-level = <9>; > >>> + power-supply = <&bl_fixed_reg>; > >>> + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; > >>> + > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&disp_pwm0_pins>; > >>> + status = "okay"; > >>> + }; > >>> + > >>> + bl_fixed_reg: fixedregulator@2 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "bl_fixed"; > >>> + regulator-min-microvolt = <1800000>; > >>> + regulator-max-microvolt = <1800000>; > >>> + startup-delay-us = <1000>; > >>> + enable-active-high; > >>> + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&bl_fixed_pins>; > >>> + }; > >>> + > >>> + chosen { > >>> + stdout-path = &uart0; > >>> + }; > >>> + > >>> + gpio_keys: gpio-keys { > >>> + compatible = "gpio-keys"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&gpio_keys_pins>; > >>> + > >>> + lid { > >>> + label = "Lid"; > >>> + gpios = <&pio 69 GPIO_ACTIVE_LOW>; > >>> + linux,code = <0>; /* SW_LID */ > >>> + linux,input-type = <5>; /* EV_SW */ > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + power { > >>> + label = "Power"; > >>> + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; > >>> + linux,code = <KEY_POWER>; > >>> + debounce-interval = <30>; > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + tablet_mode { > >>> + label = "Tablet_mode"; > >>> + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; > >>> + linux,code = <1>; /* SW_TABLET_MODE */ > >> > >> can't we use SW_TABLET_MODE fomr linux-event-codes.h? > >> > > Will fix this. > >>> + linux,input-type = <5>; /* EV_SW */ > >> > >> same here. > >> > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + volume_down { > >>> + label = "Volume_down"; > >>> + gpios = <&pio 123 GPIO_ACTIVE_LOW>; > >>> + linux,code = <KEY_VOLUMEDOWN>; > >>> + }; > >>> + > >>> + volume_up { > >>> + label = "Volume_up"; > >>> + gpios = <&pio 124 GPIO_ACTIVE_LOW>; > >>> + linux,code = <KEY_VOLUMEUP>; > >>> + }; > >>> + }; > >>> + > >>> + panel: panel { > >>> + compatible = "lg,lp120up1"; > >>> + power-supply = <&panel_fixed_3v3>; > >>> + ddc-i2c-bus = <&i2c0>; > >>> + backlight = <&backlight_lcd>; > >>> + > >>> + port { > >>> + panel_in: endpoint { > >>> + remote-endpoint = <&ps8640_out>; > >>> + }; > >>> + }; > >>> + }; > >>> + > >>> + panel_fixed_3v3: regulator@1 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "PANEL_3V3"; > >>> + regulator-min-microvolt = <3300000>; > >>> + regulator-max-microvolt = <3300000>; > >>> + enable-active-high; > >>> + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&panel_fixed_pins>; > >>> + }; > >>> + > >>> + ps8640_fixed_1v2: regulator@2 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "PS8640_1V2"; > >>> + regulator-min-microvolt = <1200000>; > >>> + regulator-max-microvolt = <1200000>; > >>> + regulator-enable-ramp-delay = <2000>; > >>> + enable-active-high; > >>> + regulator-boot-on; > >>> + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&ps8640_fixed_pins>; > >>> + }; > >>> + > >>> + sdio_fixed_3v3: fixedregulator@0 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "3V3"; > >>> + regulator-min-microvolt = <3300000>; > >>> + regulator-max-microvolt = <3300000>; > >>> + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; > >> > >> we don't need to set the pincontroller mux here? > >> > > Will double check on schematic and add it. > >>> + }; > >>> + > >>> + sound: sound { > >>> + compatible = "mediatek,mt8173-rt5650"; > >>> + mediatek,audio-codec = <&rt5650 &hdmi0>; > >>> + mediatek,platform = <&afe>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&aud_i2s2>; > >>> + > >>> + mediatek,mclk = <1>; > >>> + codec-capture { > >>> + sound-dai = <&rt5650 1>; > >>> + }; > >>> + }; > >>> + > >>> + hdmicon: connector { > >>> + compatible = "hdmi-connector"; > >>> + label = "hdmi"; > >>> + type = "a"; > >>> + ddc-i2c-bus = <&hdmiddc0>; > >>> + > >>> + port { > >>> + hdmi_connector_in: endpoint { > >>> + remote-endpoint = <&hdmi0_out>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&cec { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&cpu0 { > >>> + proc-supply = <&mt6397_vpca15_reg>; > >>> +}; > >>> + > >>> +&cpu1 { > >>> + proc-supply = <&mt6397_vpca15_reg>; > >>> +}; > >>> + > >>> +&cpu2 { > >>> + proc-supply = <&da9211_vcpu_reg>; > >>> + sram-supply = <&mt6397_vsramca7_reg>; > >>> +}; > >>> + > >>> +&cpu3 { > >>> + proc-supply = <&da9211_vcpu_reg>; > >>> + sram-supply = <&mt6397_vsramca7_reg>; > >>> +}; > >>> + > >>> +&cpu_thermal { > >>> + sustainable-power = <4500>; /* milliwatts */ > >>> + trips { > >>> + threshold: trip-point@0 { > >>> + temperature = <60000>; > >>> + }; > >>> + > >>> + target: trip-point@1 { > >>> + temperature = <65000>; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&dsi0 { > >>> + status = "okay"; > >>> + ports { > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + port@1 { > >>> + dsi0_out: endpoint { > >>> + remote-endpoint = <&ps8640_in>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&dpi0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&hdmi0 { > >>> + status = "okay"; > >>> + ports { > >>> + port@1 { > >>> + reg = <1>; > >>> + > >>> + hdmi0_out: endpoint { > >>> + remote-endpoint = <&hdmi_connector_in>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&hdmi_phy { > >>> + status = "okay"; > >>> + mediatek,ibias = <0xc>; > >>> +}; > >>> + > >>> +&i2c0 { > >>> + status = "okay"; > >>> + > >>> + rt5650: audio-codec@1a { > >>> + compatible = "realtek,rt5650"; > >>> + reg = <0x1a>; > >>> + avdd-supply = <&mt6397_vgp1_reg>; > >>> + cpvdd-supply = <&mt6397_vcama_reg>; > >> > >> Hm, only defined for "realtek,rt5663", I suppose that's an inconsistency in the > >> binding documentation. Can you please double check? > >> > > This one? https://github.com/torvalds/linux/blob/master/sound/soc/codecs/rt5645.c#L3582 > > > > Yes, I checked myself and send a patch to fix the binding description, which was > missing the two suppliers. > > > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&rt5650_irq>; > >>> + #sound-dai-cells = <1>; > >>> + realtek,dmic1-data-pin = <2>; > >>> + realtek,jd-mode = <2>; > >>> + }; > >>> + > >>> + ps8640: edp-bridge@8 { > >>> + compatible = "parade,ps8640"; > >>> + reg = <0x8>; > >>> + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; > >>> + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&ps8640_pins>; > >>> + vdd12-supply = <&ps8640_fixed_1v2>; > >>> + vdd33-supply = <&mt6397_vgp2_reg>; > >>> + > >>> + ports { > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + port@0 { > >>> + reg = <0>; > >>> + > >>> + ps8640_in: endpoint { > >>> + remote-endpoint = <&dsi0_out>; > >>> + }; > >>> + }; > >>> + > >>> + port@1 { > >>> + reg = <1>; > >>> + > >>> + ps8640_out: endpoint { > >>> + remote-endpoint = <&panel_in>; > >>> + }; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&i2c1 { > >>> + clock-frequency = <1500000>; > >>> + status = "okay"; > >>> + > >>> + da9211: da9211@68 { > >>> + compatible = "dlg,da9211"; > >>> + reg = <0x68>; > >>> + > >> > >> no interrupts? binding description have this stated as required. what happens > >> when the device raises an interrupt? > > Will double check on schematic and add it. > >> > >>> + regulators { > >>> + da9211_vcpu_reg: BUCKA { > >>> + regulator-name = "VBUCKA"; > >>> + regulator-min-microvolt = < 700000>; > >>> + regulator-max-microvolt = <1310000>; > >>> + regulator-min-microamp = <2000000>; > >>> + regulator-max-microamp = <4400000>; > >>> + regulator-ramp-delay = <10000>; > >>> + regulator-always-on; > >>> + regulator-allowed-modes = <0 1>; > >>> + }; > >>> + > >>> + da9211_vgpu_reg: BUCKB { > >>> + regulator-name = "VBUCKB"; > >>> + regulator-min-microvolt = < 700000>; > >>> + regulator-max-microvolt = <1310000>; > >>> + regulator-min-microamp = <2000000>; > >>> + regulator-max-microamp = <3000000>; > >>> + regulator-ramp-delay = <10000>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&i2c2 { > >>> + status = "okay"; > >>> + > >>> + tpm: tpm@20 { > >>> + compatible = "infineon,slb9645tt"; > >>> + reg = <0x20>; > >>> + powered-while-suspended; > >>> + }; > >>> +}; > >>> + > >>> +&i2c3 { > >>> + clock-frequency = <400000>; > >>> + status = "okay"; > >>> + > >>> + touchscreen: touchscreen@10 { > >>> + compatible = "elan,ekth3500"; > >>> + reg = <0x10>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >>> +}; > >>> + > >>> +&i2c4 { > >>> + clock-frequency = <400000>; > >>> + status = "okay"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&trackpad_irq>; > >> > >> Why not move the pinctrl properties into the trackpad node? > >> > > As second source trackpad device and original device shares same > > compatible string (rev id), we need to add 2nd trackpad node here. > > According to previous log (since I don't have a second source trackpad > > device to test), adding pinctrl in each trackpad node, there would be > > error: > > [ 0.643501] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin URXD3 > > already requested by 7-0015; cannot claim for 7-002c > > [ 0.643525] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin-117 > > (7-002c) status -22 > > [ 0.643548] mediatek-mt8173-pinctrl 1000b000.pinctrl: could not > > request pin 117 (URXD3) from group URXD3 on device 1000b000.pinctrl > > [ 0.643568] i2c_hid 7-002c: Error applying setting, reverse things back > > [ 0.643867] i2c 7-002c: Driver i2c_hid requests probe deferral > > > > > > I think we can fix this, if we create the aforementioned two board DTS files. > Correct? > > >>> + > >>> + trackpad: trackpad@15 { > >>> + compatible = "elan,ekth3000"; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > >>> + reg = <0x15>; > >>> + vcc-supply = <&mt6397_vgp6_reg>; > >>> + wakeup-source; > >>> + }; > >>> +}; > >>> + > >>> +&mipi_tx0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&mmc0 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc0_pins_default>; > >>> + pinctrl-1 = <&mmc0_pins_uhs>; > >>> + bus-width = <8>; > >>> + max-frequency = <200000000>; > >>> + cap-mmc-highspeed; > >>> + mmc-hs200-1_8v; > >>> + mmc-hs400-1_8v; > >>> + cap-mmc-hw-reset; > >>> + hs400-ds-delay = <0x14015>; > >>> + mediatek,hs200-cmd-int-delay=<30>; > >>> + mediatek,hs400-cmd-int-delay=<14>; > >>> + mediatek,hs400-cmd-resp-sel-rising; > >>> + vmmc-supply = <&mt6397_vemc_3v3_reg>; > >>> + vqmmc-supply = <&mt6397_vio18_reg>; > >>> + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; > >>> + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; > >>> + non-removable; > >>> +}; > >>> + > >>> +&mmc1 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc1_pins_default>; > >>> + pinctrl-1 = <&mmc1_pins_uhs>; > >>> + bus-width = <4>; > >>> + max-frequency = <200000000>; > >>> + cap-sd-highspeed; > >>> + sd-uhs-sdr50; > >>> + sd-uhs-sdr104; > >>> + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; > >>> + vmmc-supply = <&mt6397_vmch_reg>; > >>> + vqmmc-supply = <&mt6397_vmc_reg>; > >>> +}; > >>> + > >>> +&mmc3 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc3_pins_default>; > >>> + pinctrl-1 = <&mmc3_pins_uhs>; > >>> + bus-width = <4>; > >>> + max-frequency = <200000000>; > >>> + cap-sd-highspeed; > >>> + sd-uhs-sdr50; > >>> + sd-uhs-sdr104; > >>> + sdr104-clk-delay = <5>; > >> > >> Not an upstream property, please delete it. > >> > >>> + keep-power-in-suspend; > >>> + enable-sdio-wakeup; > >>> + cap-sdio-irq; > >>> + vmmc-supply = <&sdio_fixed_3v3>; > >>> + vqmmc-supply = <&mt6397_vgp3_reg>; > >>> + non-removable; > >>> + cap-power-off-card; > >>> + > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + btmrvl: btmrvl@2 { > >>> + compatible = "marvell,sd8897-bt"; > >>> + reg = <2>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; > >>> + marvell,wakeup-pin = /bits/ 16 <0x0d>; > >>> + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; > >>> + }; > >>> + > >>> + mwifiex: mwifiex@1 { > >>> + compatible = "marvell,sd8897"; > >>> + reg = <1>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; > >>> + marvell,wakeup-pin = <3>; > >>> + marvell,caldata_ed_mac = /bits/ 8 < > >>> +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > >>> +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > >>> + >; > >> > >> Not an upstream property, please delete. > >> > >>> + }; > >>> +}; > >>> + > >>> +&nor_flash { > >>> + status = "okay"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&nor_gpio1_pins>; > >>> + bus-width = <8>; > >>> + max-frequency = <50000000>; > >>> + non-removable; > >>> + flash@0 { > >>> + compatible = "jedec,spi-nor"; > >>> + reg = <0>; > >>> + }; > >>> +}; > >>> + > >>> +&pio { > >>> + aud_i2s2: aud_i2s2 { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, > >>> + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, > >>> + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, > >>> + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, > >>> + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, > >>> + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, > >>> + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; > >>> + bias-pull-down; > >>> + }; > >>> + }; > >>> + > >>> + bl_fixed_pins: bl_fixed_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + bt_wake_pins: bt_wake_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + disp_pwm0_pins: disp_pwm0_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + gpio_keys_pins: gpio_keys_pins { > >>> + volume_pins { > >>> + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, > >>> + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + tablet_mode_pins { > >>> + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + hdmi_mux_pins: hdmi_mux_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; > >>> + }; > >>> + }; > >>> + > >>> + mmc0_pins_default: mmc0default { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > >>> + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > >>> + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > >>> + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > >>> + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > >>> + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > >>> + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > >>> + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > >>> + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > >>> + bias-pull-down; > >> > >> identation. > >> > >>> + }; > >>> + > >>> + pins_rst { > >>> + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_default: mmc1default { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > >>> + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > >>> + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > >>> + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > >>> + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > >>> + bias-pull-down; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + }; > >>> + > >>> + pins_insert { > >>> + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc3_pins_default: mmc3default { > >>> + pins_dat { > >>> + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > >>> + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > >>> + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > >>> + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_cmd { > >>> + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > >>> + bias-pull-down; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + }; > >>> + > >>> + pins_pdn { > >>> + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + mmc0_pins_uhs: mmc0 { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > >>> + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > >>> + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > >>> + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > >>> + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > >>> + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > >>> + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > >>> + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > >>> + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_6mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > >>> + drive-strength = <MTK_DRIVE_6mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > >>> + }; > >>> + > >>> + pins_ds { > >>> + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; > >>> + drive-strength = <MTK_DRIVE_10mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > >>> + }; > >>> + > >>> + pins_rst { > >>> + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_uhs: mmc1 { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > >>> + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > >>> + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > >>> + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > >>> + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_6mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + }; > >>> + > >>> + mmc3_pins_uhs: mmc3 { > >>> + pins_dat { > >>> + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > >>> + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > >>> + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > >>> + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_cmd { > >>> + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + }; > >>> + > >>> + nor_gpio1_pins: nor { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, > >>> + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, > >>> + <MT8173_PIN_8_EINT8__FUNC_SFIN>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins2 { > >>> + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + panel_fixed_pins: panel_fixed_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; > >>> + }; > >>> + }; > >>> + > >>> + ps8640_pins: ps8640_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, > >>> + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, > >>> + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; > >>> + }; > >>> + }; > >>> + > >>> + ps8640_fixed_pins: ps8640_fixed_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; > >>> + }; > >>> + }; > >>> + > >>> + rt5650_irq: rt5650_irq { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; > >>> + bias-pull-down; > >>> + }; > >>> + }; > >>> + > >>> + spi_pins_a: spi1 { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_spi { > >>> + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, > >>> + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, > >>> + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, > >>> + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; > >>> + bias-disable; > >>> + }; > >>> + }; > >>> + > >>> + trackpad_irq: trackpad_irq { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; > >>> + input-enable; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + usb_pins: usb@0 { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; > >>> + output-high; > >>> + bias-disable; > >>> + }; > >>> + }; > >>> + > >>> + wifi_wake_pins: wifi_wake_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&pwm0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&pwrap { > >>> + pmic: mt6397 { > >>> + compatible = "mediatek,mt6397"; > >>> + #address-cells = <1>; > >>> + #size-cells = <1>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > >>> + interrupt-controller; > >>> + #interrupt-cells = <2>; > >>> + > >>> + mt6397rtc: mt6397rtc { > >> > >> AFAIK this should be > >> rtc: mt6397rtc { > >> > >> Please fix that for all subnodes. > >> > > Will fix in next version > >>> + compatible = "mediatek,mt6397-rtc"; > >>> + }; > >>> + > >>> + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { > >>> + compatible = "mediatek,mt6397-pctl-pmic-syscfg", > >>> + "syscon"; > >>> + reg = <0 0x0000c000 0 0x0108>; > >> > >> not an upstream compatible, please delete the node. > >> > > I think my comment was not correct. I'll have to dig more to understand why we > have a compatible without a binding description. > > Regards, > Matthias _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board 2020-01-14 15:10 ` Matthias Brugger (?) @ 2020-01-15 8:53 ` Hsin-Yi Wang -1 siblings, 0 replies; 42+ messages in thread From: Hsin-Yi Wang @ 2020-01-15 8:53 UTC (permalink / raw) To: Matthias Brugger Cc: moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE, Rob Herring, Mark Rutland, Devicetree List, lkml, linux-mediatek, Nicolas Boichat, Enric Balletbo i Serra, Daniel Kurtz On Tue, Jan 14, 2020 at 11:10 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: > > > > On 13/01/2020 19:01, Hsin-Yi Wang wrote: > > On Fri, Jan 10, 2020 at 9:42 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: > >> > >> > > Thanks, I will address the comments and send next version > >> > >> On 10/01/2020 08:37, Hsin-Yi Wang wrote: > >>> Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > >>> SoC. > >>> > >>> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > >>> --- > >>> Changes in v2: > >>> - remove downstream nodes and unused nodes > >>> - use GPIO_ACTIVE_LOW for ps8640 gpios > >>> - move trackpad to hana > >>> --- > >>> arch/arm64/boot/dts/mediatek/Makefile | 3 + > >>> .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > >>> .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > >>> .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > >>> arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > >>> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > >>> 6 files changed, 1161 insertions(+) > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> > >>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > >>> index 458bbc422a94..b45a45a565a1 100644 > >>> --- a/arch/arm64/boot/dts/mediatek/Makefile > >>> +++ b/arch/arm64/boot/dts/mediatek/Makefile > >>> @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> new file mode 100644 > >>> index 000000000000..a3616bc3d859 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> @@ -0,0 +1,27 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2019 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm-hana.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Hana rev7 board"; > >>> + compatible = "google,hana-rev7", "mediatek,mt8173"; > >>> +}; > >>> + > >>> +&cpu_thermal { > >>> + trips { > >>> + cpu_crit: cpu_crit@0 { > >>> + temperature = <100000>; > >>> + type = "critical"; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&gpio_keys { > >>> + /delete-node/tablet_mode; > >>> + /delete-node/volume_down; > >>> + /delete-node/volume_up; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> new file mode 100644 > >>> index 000000000000..8cbcc75192e3 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> @@ -0,0 +1,16 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm-hana.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Hana rev0 board"; > > If we can't make this more verbose, at least delete rev0, that's confusing. > Should the name not be "Google Hana"? > > >>> + compatible = "google,hana-rev6", > >>> + "google,hana-rev5", "google,hana-rev4", > >>> + "google,hana-rev3", "google,hana-rev2", > >>> + "google,hana-rev1", "google,hana-rev0", > >>> + "google,hana", "mediatek,mt8173"; > >>> +}; > >> > >> I'm a bit confused about all this versions. Do you want to keep them for > >> internal use, as I suppose only rev6 is available to the general public, > >> correct? I'm fine with keeping the old revisions if that's of use for you, > >> otherwise I'd prefer to delete them. > > According to internal feedback system, at least rev3, rev6, rev7 are > > in general public. I can delete rev0~rev2, since they are earlier > > version device. > > If you don't plan to use the rev0 to rev2 in-house, then we can delete them. > > >> > >> Model name could be more verbose. > >> > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> new file mode 100644 > >>> index 000000000000..35e12b290947 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> @@ -0,0 +1,60 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +#include "mt8173-elm.dtsi" > >>> + > >>> +&i2c0 { > >>> + clock-frequency = <200000>; > >>> +}; > >>> + > >>> +&i2c3 { > >>> + touchscreen2: touchscreen@34 { > >>> + compatible = "melfas,mip4_ts"; > >>> + reg = <0x34>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >>> + > >>> + touchscreen3: touchscreen@20 { > >>> + compatible = "hid-over-i2c"; > >>> + reg = <0x20>; > >>> + hid-descr-addr = <0x0020>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >> > >> In v1 you mentioned: > >> "Partners wants to increase touchpad and touchscreen source (they choose > >> synaptics) for hana 300e, and synaptics uses hid-over-i2c driver." > >> > >> So the partner uses the same compatible (google,hana-rev6?) for both devices? > >> > > Confirmed with others, second source devices share same compatible. > > We should create independent dts for the different boards. Like it is done for > gru-scarlett. Doesn't the FW provide the sku number in the compatible string? > > >>> +}; > >>> + > >>> +&i2c4 { > >>> + trackpad2: trackpad@2c { > >>> + compatible = "hid-over-i2c"; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > >>> + reg = <0x2c>; > >>> + hid-descr-addr = <0x0020>; > >>> + wakeup-source; > >>> + }; > >>> +}; > >>> + > >>> +&mmc1 { > >>> + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; > >>> +}; > >>> + > >>> +&pio { > >>> + hdmi_mux_pins: hdmi_mux_pins { > >>> + pins2 { > >>> + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; > >>> + bias-pull-up; > >>> + output-high; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_default: mmc1default { > >>> + pins_wp { > >>> + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; > >>> + input-enable; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> new file mode 100644 > >>> index 000000000000..e5da2355760e > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> @@ -0,0 +1,15 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Elm board"; > >>> + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", > >>> + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", > >>> + "google,elm-rev2", "google,elm-rev1", > >>> + "google,elm", "mediatek,mt8173"; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> new file mode 100644 > >>> index 000000000000..2ac738bebe04 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> @@ -0,0 +1,1040 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +#include <dt-bindings/input/input.h> > >>> +#include <dt-bindings/gpio/gpio.h> > >>> +#include "mt8173.dtsi" > >>> + > >>> +/ { > >>> + aliases { > >>> + serial0 = &uart0; > >>> + serial1 = &uart1; > >>> + serial2 = &uart2; > >>> + serial3 = &uart3; > >>> + }; > >>> + > >>> + memory@40000000 { > >>> + device_type = "memory"; > >>> + reg = <0 0x40000000 0 0x80000000>; > >>> + }; > >>> + > >>> + backlight_lcd: backlight_lcd { > >>> + compatible = "pwm-backlight"; > >>> + pwms = <&pwm0 0 1000000>; > >>> + brightness-levels = < > >>> + 0 16 32 48 64 80 96 112 > >>> + 128 144 160 176 192 208 224 240 > >>> + 255 > >>> + >; > >>> + default-brightness-level = <9>; > >>> + power-supply = <&bl_fixed_reg>; > >>> + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; > >>> + > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&disp_pwm0_pins>; > >>> + status = "okay"; > >>> + }; > >>> + > >>> + bl_fixed_reg: fixedregulator@2 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "bl_fixed"; > >>> + regulator-min-microvolt = <1800000>; > >>> + regulator-max-microvolt = <1800000>; > >>> + startup-delay-us = <1000>; > >>> + enable-active-high; > >>> + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&bl_fixed_pins>; > >>> + }; > >>> + > >>> + chosen { > >>> + stdout-path = &uart0; > >>> + }; > >>> + > >>> + gpio_keys: gpio-keys { > >>> + compatible = "gpio-keys"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&gpio_keys_pins>; > >>> + > >>> + lid { > >>> + label = "Lid"; > >>> + gpios = <&pio 69 GPIO_ACTIVE_LOW>; > >>> + linux,code = <0>; /* SW_LID */ > >>> + linux,input-type = <5>; /* EV_SW */ > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + power { > >>> + label = "Power"; > >>> + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; > >>> + linux,code = <KEY_POWER>; > >>> + debounce-interval = <30>; > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + tablet_mode { > >>> + label = "Tablet_mode"; > >>> + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; > >>> + linux,code = <1>; /* SW_TABLET_MODE */ > >> > >> can't we use SW_TABLET_MODE fomr linux-event-codes.h? > >> > > Will fix this. > >>> + linux,input-type = <5>; /* EV_SW */ > >> > >> same here. > >> > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + volume_down { > >>> + label = "Volume_down"; > >>> + gpios = <&pio 123 GPIO_ACTIVE_LOW>; > >>> + linux,code = <KEY_VOLUMEDOWN>; > >>> + }; > >>> + > >>> + volume_up { > >>> + label = "Volume_up"; > >>> + gpios = <&pio 124 GPIO_ACTIVE_LOW>; > >>> + linux,code = <KEY_VOLUMEUP>; > >>> + }; > >>> + }; > >>> + > >>> + panel: panel { > >>> + compatible = "lg,lp120up1"; > >>> + power-supply = <&panel_fixed_3v3>; > >>> + ddc-i2c-bus = <&i2c0>; > >>> + backlight = <&backlight_lcd>; > >>> + > >>> + port { > >>> + panel_in: endpoint { > >>> + remote-endpoint = <&ps8640_out>; > >>> + }; > >>> + }; > >>> + }; > >>> + > >>> + panel_fixed_3v3: regulator@1 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "PANEL_3V3"; > >>> + regulator-min-microvolt = <3300000>; > >>> + regulator-max-microvolt = <3300000>; > >>> + enable-active-high; > >>> + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&panel_fixed_pins>; > >>> + }; > >>> + > >>> + ps8640_fixed_1v2: regulator@2 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "PS8640_1V2"; > >>> + regulator-min-microvolt = <1200000>; > >>> + regulator-max-microvolt = <1200000>; > >>> + regulator-enable-ramp-delay = <2000>; > >>> + enable-active-high; > >>> + regulator-boot-on; > >>> + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&ps8640_fixed_pins>; > >>> + }; > >>> + > >>> + sdio_fixed_3v3: fixedregulator@0 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "3V3"; > >>> + regulator-min-microvolt = <3300000>; > >>> + regulator-max-microvolt = <3300000>; > >>> + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; > >> > >> we don't need to set the pincontroller mux here? > >> > > Will double check on schematic and add it. > >>> + }; > >>> + > >>> + sound: sound { > >>> + compatible = "mediatek,mt8173-rt5650"; > >>> + mediatek,audio-codec = <&rt5650 &hdmi0>; > >>> + mediatek,platform = <&afe>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&aud_i2s2>; > >>> + > >>> + mediatek,mclk = <1>; > >>> + codec-capture { > >>> + sound-dai = <&rt5650 1>; > >>> + }; > >>> + }; > >>> + > >>> + hdmicon: connector { > >>> + compatible = "hdmi-connector"; > >>> + label = "hdmi"; > >>> + type = "a"; > >>> + ddc-i2c-bus = <&hdmiddc0>; > >>> + > >>> + port { > >>> + hdmi_connector_in: endpoint { > >>> + remote-endpoint = <&hdmi0_out>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&cec { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&cpu0 { > >>> + proc-supply = <&mt6397_vpca15_reg>; > >>> +}; > >>> + > >>> +&cpu1 { > >>> + proc-supply = <&mt6397_vpca15_reg>; > >>> +}; > >>> + > >>> +&cpu2 { > >>> + proc-supply = <&da9211_vcpu_reg>; > >>> + sram-supply = <&mt6397_vsramca7_reg>; > >>> +}; > >>> + > >>> +&cpu3 { > >>> + proc-supply = <&da9211_vcpu_reg>; > >>> + sram-supply = <&mt6397_vsramca7_reg>; > >>> +}; > >>> + > >>> +&cpu_thermal { > >>> + sustainable-power = <4500>; /* milliwatts */ > >>> + trips { > >>> + threshold: trip-point@0 { > >>> + temperature = <60000>; > >>> + }; > >>> + > >>> + target: trip-point@1 { > >>> + temperature = <65000>; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&dsi0 { > >>> + status = "okay"; > >>> + ports { > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + port@1 { > >>> + dsi0_out: endpoint { > >>> + remote-endpoint = <&ps8640_in>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&dpi0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&hdmi0 { > >>> + status = "okay"; > >>> + ports { > >>> + port@1 { > >>> + reg = <1>; > >>> + > >>> + hdmi0_out: endpoint { > >>> + remote-endpoint = <&hdmi_connector_in>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&hdmi_phy { > >>> + status = "okay"; > >>> + mediatek,ibias = <0xc>; > >>> +}; > >>> + > >>> +&i2c0 { > >>> + status = "okay"; > >>> + > >>> + rt5650: audio-codec@1a { > >>> + compatible = "realtek,rt5650"; > >>> + reg = <0x1a>; > >>> + avdd-supply = <&mt6397_vgp1_reg>; > >>> + cpvdd-supply = <&mt6397_vcama_reg>; > >> > >> Hm, only defined for "realtek,rt5663", I suppose that's an inconsistency in the > >> binding documentation. Can you please double check? > >> > > This one? https://github.com/torvalds/linux/blob/master/sound/soc/codecs/rt5645.c#L3582 > > > > Yes, I checked myself and send a patch to fix the binding description, which was > missing the two suppliers. > > > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&rt5650_irq>; > >>> + #sound-dai-cells = <1>; > >>> + realtek,dmic1-data-pin = <2>; > >>> + realtek,jd-mode = <2>; > >>> + }; > >>> + > >>> + ps8640: edp-bridge@8 { > >>> + compatible = "parade,ps8640"; > >>> + reg = <0x8>; > >>> + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; > >>> + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&ps8640_pins>; > >>> + vdd12-supply = <&ps8640_fixed_1v2>; > >>> + vdd33-supply = <&mt6397_vgp2_reg>; > >>> + > >>> + ports { > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + port@0 { > >>> + reg = <0>; > >>> + > >>> + ps8640_in: endpoint { > >>> + remote-endpoint = <&dsi0_out>; > >>> + }; > >>> + }; > >>> + > >>> + port@1 { > >>> + reg = <1>; > >>> + > >>> + ps8640_out: endpoint { > >>> + remote-endpoint = <&panel_in>; > >>> + }; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&i2c1 { > >>> + clock-frequency = <1500000>; > >>> + status = "okay"; > >>> + > >>> + da9211: da9211@68 { > >>> + compatible = "dlg,da9211"; > >>> + reg = <0x68>; > >>> + > >> > >> no interrupts? binding description have this stated as required. what happens > >> when the device raises an interrupt? > > Will double check on schematic and add it. > >> > >>> + regulators { > >>> + da9211_vcpu_reg: BUCKA { > >>> + regulator-name = "VBUCKA"; > >>> + regulator-min-microvolt = < 700000>; > >>> + regulator-max-microvolt = <1310000>; > >>> + regulator-min-microamp = <2000000>; > >>> + regulator-max-microamp = <4400000>; > >>> + regulator-ramp-delay = <10000>; > >>> + regulator-always-on; > >>> + regulator-allowed-modes = <0 1>; > >>> + }; > >>> + > >>> + da9211_vgpu_reg: BUCKB { > >>> + regulator-name = "VBUCKB"; > >>> + regulator-min-microvolt = < 700000>; > >>> + regulator-max-microvolt = <1310000>; > >>> + regulator-min-microamp = <2000000>; > >>> + regulator-max-microamp = <3000000>; > >>> + regulator-ramp-delay = <10000>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&i2c2 { > >>> + status = "okay"; > >>> + > >>> + tpm: tpm@20 { > >>> + compatible = "infineon,slb9645tt"; > >>> + reg = <0x20>; > >>> + powered-while-suspended; > >>> + }; > >>> +}; > >>> + > >>> +&i2c3 { > >>> + clock-frequency = <400000>; > >>> + status = "okay"; > >>> + > >>> + touchscreen: touchscreen@10 { > >>> + compatible = "elan,ekth3500"; > >>> + reg = <0x10>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >>> +}; > >>> + > >>> +&i2c4 { > >>> + clock-frequency = <400000>; > >>> + status = "okay"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&trackpad_irq>; > >> > >> Why not move the pinctrl properties into the trackpad node? > >> > > As second source trackpad device and original device shares same > > compatible string (rev id), we need to add 2nd trackpad node here. > > According to previous log (since I don't have a second source trackpad > > device to test), adding pinctrl in each trackpad node, there would be > > error: > > [ 0.643501] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin URXD3 > > already requested by 7-0015; cannot claim for 7-002c > > [ 0.643525] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin-117 > > (7-002c) status -22 > > [ 0.643548] mediatek-mt8173-pinctrl 1000b000.pinctrl: could not > > request pin 117 (URXD3) from group URXD3 on device 1000b000.pinctrl > > [ 0.643568] i2c_hid 7-002c: Error applying setting, reverse things back > > [ 0.643867] i2c 7-002c: Driver i2c_hid requests probe deferral > > > > > > I think we can fix this, if we create the aforementioned two board DTS files. > Correct? > > >>> + > >>> + trackpad: trackpad@15 { > >>> + compatible = "elan,ekth3000"; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > >>> + reg = <0x15>; > >>> + vcc-supply = <&mt6397_vgp6_reg>; > >>> + wakeup-source; > >>> + }; > >>> +}; > >>> + > >>> +&mipi_tx0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&mmc0 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc0_pins_default>; > >>> + pinctrl-1 = <&mmc0_pins_uhs>; > >>> + bus-width = <8>; > >>> + max-frequency = <200000000>; > >>> + cap-mmc-highspeed; > >>> + mmc-hs200-1_8v; > >>> + mmc-hs400-1_8v; > >>> + cap-mmc-hw-reset; > >>> + hs400-ds-delay = <0x14015>; > >>> + mediatek,hs200-cmd-int-delay=<30>; > >>> + mediatek,hs400-cmd-int-delay=<14>; > >>> + mediatek,hs400-cmd-resp-sel-rising; > >>> + vmmc-supply = <&mt6397_vemc_3v3_reg>; > >>> + vqmmc-supply = <&mt6397_vio18_reg>; > >>> + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; > >>> + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; > >>> + non-removable; > >>> +}; > >>> + > >>> +&mmc1 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc1_pins_default>; > >>> + pinctrl-1 = <&mmc1_pins_uhs>; > >>> + bus-width = <4>; > >>> + max-frequency = <200000000>; > >>> + cap-sd-highspeed; > >>> + sd-uhs-sdr50; > >>> + sd-uhs-sdr104; > >>> + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; > >>> + vmmc-supply = <&mt6397_vmch_reg>; > >>> + vqmmc-supply = <&mt6397_vmc_reg>; > >>> +}; > >>> + > >>> +&mmc3 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc3_pins_default>; > >>> + pinctrl-1 = <&mmc3_pins_uhs>; > >>> + bus-width = <4>; > >>> + max-frequency = <200000000>; > >>> + cap-sd-highspeed; > >>> + sd-uhs-sdr50; > >>> + sd-uhs-sdr104; > >>> + sdr104-clk-delay = <5>; > >> > >> Not an upstream property, please delete it. > >> > >>> + keep-power-in-suspend; > >>> + enable-sdio-wakeup; > >>> + cap-sdio-irq; > >>> + vmmc-supply = <&sdio_fixed_3v3>; > >>> + vqmmc-supply = <&mt6397_vgp3_reg>; > >>> + non-removable; > >>> + cap-power-off-card; > >>> + > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + btmrvl: btmrvl@2 { > >>> + compatible = "marvell,sd8897-bt"; > >>> + reg = <2>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; > >>> + marvell,wakeup-pin = /bits/ 16 <0x0d>; > >>> + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; > >>> + }; > >>> + > >>> + mwifiex: mwifiex@1 { > >>> + compatible = "marvell,sd8897"; > >>> + reg = <1>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; > >>> + marvell,wakeup-pin = <3>; > >>> + marvell,caldata_ed_mac = /bits/ 8 < > >>> +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > >>> +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > >>> + >; > >> > >> Not an upstream property, please delete. > >> > >>> + }; > >>> +}; > >>> + > >>> +&nor_flash { > >>> + status = "okay"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&nor_gpio1_pins>; > >>> + bus-width = <8>; > >>> + max-frequency = <50000000>; > >>> + non-removable; > >>> + flash@0 { > >>> + compatible = "jedec,spi-nor"; > >>> + reg = <0>; > >>> + }; > >>> +}; > >>> + > >>> +&pio { > >>> + aud_i2s2: aud_i2s2 { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, > >>> + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, > >>> + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, > >>> + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, > >>> + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, > >>> + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, > >>> + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; > >>> + bias-pull-down; > >>> + }; > >>> + }; > >>> + > >>> + bl_fixed_pins: bl_fixed_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + bt_wake_pins: bt_wake_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + disp_pwm0_pins: disp_pwm0_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + gpio_keys_pins: gpio_keys_pins { > >>> + volume_pins { > >>> + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, > >>> + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + tablet_mode_pins { > >>> + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + hdmi_mux_pins: hdmi_mux_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; > >>> + }; > >>> + }; > >>> + > >>> + mmc0_pins_default: mmc0default { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > >>> + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > >>> + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > >>> + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > >>> + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > >>> + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > >>> + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > >>> + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > >>> + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > >>> + bias-pull-down; > >> > >> identation. > >> > >>> + }; > >>> + > >>> + pins_rst { > >>> + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_default: mmc1default { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > >>> + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > >>> + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > >>> + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > >>> + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > >>> + bias-pull-down; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + }; > >>> + > >>> + pins_insert { > >>> + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc3_pins_default: mmc3default { > >>> + pins_dat { > >>> + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > >>> + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > >>> + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > >>> + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_cmd { > >>> + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > >>> + bias-pull-down; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + }; > >>> + > >>> + pins_pdn { > >>> + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + mmc0_pins_uhs: mmc0 { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > >>> + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > >>> + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > >>> + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > >>> + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > >>> + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > >>> + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > >>> + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > >>> + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_6mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > >>> + drive-strength = <MTK_DRIVE_6mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > >>> + }; > >>> + > >>> + pins_ds { > >>> + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; > >>> + drive-strength = <MTK_DRIVE_10mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > >>> + }; > >>> + > >>> + pins_rst { > >>> + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_uhs: mmc1 { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > >>> + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > >>> + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > >>> + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > >>> + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_6mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + }; > >>> + > >>> + mmc3_pins_uhs: mmc3 { > >>> + pins_dat { > >>> + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > >>> + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > >>> + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > >>> + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_cmd { > >>> + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + }; > >>> + > >>> + nor_gpio1_pins: nor { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, > >>> + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, > >>> + <MT8173_PIN_8_EINT8__FUNC_SFIN>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins2 { > >>> + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + panel_fixed_pins: panel_fixed_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; > >>> + }; > >>> + }; > >>> + > >>> + ps8640_pins: ps8640_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, > >>> + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, > >>> + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; > >>> + }; > >>> + }; > >>> + > >>> + ps8640_fixed_pins: ps8640_fixed_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; > >>> + }; > >>> + }; > >>> + > >>> + rt5650_irq: rt5650_irq { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; > >>> + bias-pull-down; > >>> + }; > >>> + }; > >>> + > >>> + spi_pins_a: spi1 { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_spi { > >>> + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, > >>> + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, > >>> + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, > >>> + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; > >>> + bias-disable; > >>> + }; > >>> + }; > >>> + > >>> + trackpad_irq: trackpad_irq { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; > >>> + input-enable; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + usb_pins: usb@0 { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; > >>> + output-high; > >>> + bias-disable; > >>> + }; > >>> + }; > >>> + > >>> + wifi_wake_pins: wifi_wake_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&pwm0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&pwrap { > >>> + pmic: mt6397 { > >>> + compatible = "mediatek,mt6397"; > >>> + #address-cells = <1>; > >>> + #size-cells = <1>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > >>> + interrupt-controller; > >>> + #interrupt-cells = <2>; > >>> + > >>> + mt6397rtc: mt6397rtc { > >> > >> AFAIK this should be > >> rtc: mt6397rtc { > >> > >> Please fix that for all subnodes. > >> > > Will fix in next version > >>> + compatible = "mediatek,mt6397-rtc"; > >>> + }; > >>> + > >>> + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { > >>> + compatible = "mediatek,mt6397-pctl-pmic-syscfg", > >>> + "syscon"; > >>> + reg = <0 0x0000c000 0 0x0108>; > >> > >> not an upstream compatible, please delete the node. > >> > > I think my comment was not correct. I'll have to dig more to understand why we > have a compatible without a binding description. > Here's a similar syscon node that is in a binding document's example: syscfg_pctl_a: syscfg-pctl-a@10005000 { compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon"; reg = <0 0x10005000 0 0x1000>; }; https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt#L81 > Regards, > Matthias ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board @ 2020-01-15 8:53 ` Hsin-Yi Wang 0 siblings, 0 replies; 42+ messages in thread From: Hsin-Yi Wang @ 2020-01-15 8:53 UTC (permalink / raw) To: Matthias Brugger Cc: Mark Rutland, Devicetree List, Nicolas Boichat, lkml, Daniel Kurtz, Rob Herring, linux-mediatek, Enric Balletbo i Serra, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Tue, Jan 14, 2020 at 11:10 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: > > > > On 13/01/2020 19:01, Hsin-Yi Wang wrote: > > On Fri, Jan 10, 2020 at 9:42 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: > >> > >> > > Thanks, I will address the comments and send next version > >> > >> On 10/01/2020 08:37, Hsin-Yi Wang wrote: > >>> Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > >>> SoC. > >>> > >>> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > >>> --- > >>> Changes in v2: > >>> - remove downstream nodes and unused nodes > >>> - use GPIO_ACTIVE_LOW for ps8640 gpios > >>> - move trackpad to hana > >>> --- > >>> arch/arm64/boot/dts/mediatek/Makefile | 3 + > >>> .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > >>> .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > >>> .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > >>> arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > >>> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > >>> 6 files changed, 1161 insertions(+) > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> > >>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > >>> index 458bbc422a94..b45a45a565a1 100644 > >>> --- a/arch/arm64/boot/dts/mediatek/Makefile > >>> +++ b/arch/arm64/boot/dts/mediatek/Makefile > >>> @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> new file mode 100644 > >>> index 000000000000..a3616bc3d859 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> @@ -0,0 +1,27 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2019 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm-hana.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Hana rev7 board"; > >>> + compatible = "google,hana-rev7", "mediatek,mt8173"; > >>> +}; > >>> + > >>> +&cpu_thermal { > >>> + trips { > >>> + cpu_crit: cpu_crit@0 { > >>> + temperature = <100000>; > >>> + type = "critical"; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&gpio_keys { > >>> + /delete-node/tablet_mode; > >>> + /delete-node/volume_down; > >>> + /delete-node/volume_up; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> new file mode 100644 > >>> index 000000000000..8cbcc75192e3 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> @@ -0,0 +1,16 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm-hana.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Hana rev0 board"; > > If we can't make this more verbose, at least delete rev0, that's confusing. > Should the name not be "Google Hana"? > > >>> + compatible = "google,hana-rev6", > >>> + "google,hana-rev5", "google,hana-rev4", > >>> + "google,hana-rev3", "google,hana-rev2", > >>> + "google,hana-rev1", "google,hana-rev0", > >>> + "google,hana", "mediatek,mt8173"; > >>> +}; > >> > >> I'm a bit confused about all this versions. Do you want to keep them for > >> internal use, as I suppose only rev6 is available to the general public, > >> correct? I'm fine with keeping the old revisions if that's of use for you, > >> otherwise I'd prefer to delete them. > > According to internal feedback system, at least rev3, rev6, rev7 are > > in general public. I can delete rev0~rev2, since they are earlier > > version device. > > If you don't plan to use the rev0 to rev2 in-house, then we can delete them. > > >> > >> Model name could be more verbose. > >> > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> new file mode 100644 > >>> index 000000000000..35e12b290947 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> @@ -0,0 +1,60 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +#include "mt8173-elm.dtsi" > >>> + > >>> +&i2c0 { > >>> + clock-frequency = <200000>; > >>> +}; > >>> + > >>> +&i2c3 { > >>> + touchscreen2: touchscreen@34 { > >>> + compatible = "melfas,mip4_ts"; > >>> + reg = <0x34>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >>> + > >>> + touchscreen3: touchscreen@20 { > >>> + compatible = "hid-over-i2c"; > >>> + reg = <0x20>; > >>> + hid-descr-addr = <0x0020>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >> > >> In v1 you mentioned: > >> "Partners wants to increase touchpad and touchscreen source (they choose > >> synaptics) for hana 300e, and synaptics uses hid-over-i2c driver." > >> > >> So the partner uses the same compatible (google,hana-rev6?) for both devices? > >> > > Confirmed with others, second source devices share same compatible. > > We should create independent dts for the different boards. Like it is done for > gru-scarlett. Doesn't the FW provide the sku number in the compatible string? > > >>> +}; > >>> + > >>> +&i2c4 { > >>> + trackpad2: trackpad@2c { > >>> + compatible = "hid-over-i2c"; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > >>> + reg = <0x2c>; > >>> + hid-descr-addr = <0x0020>; > >>> + wakeup-source; > >>> + }; > >>> +}; > >>> + > >>> +&mmc1 { > >>> + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; > >>> +}; > >>> + > >>> +&pio { > >>> + hdmi_mux_pins: hdmi_mux_pins { > >>> + pins2 { > >>> + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; > >>> + bias-pull-up; > >>> + output-high; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_default: mmc1default { > >>> + pins_wp { > >>> + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; > >>> + input-enable; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> new file mode 100644 > >>> index 000000000000..e5da2355760e > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> @@ -0,0 +1,15 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Elm board"; > >>> + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", > >>> + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", > >>> + "google,elm-rev2", "google,elm-rev1", > >>> + "google,elm", "mediatek,mt8173"; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> new file mode 100644 > >>> index 000000000000..2ac738bebe04 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> @@ -0,0 +1,1040 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +#include <dt-bindings/input/input.h> > >>> +#include <dt-bindings/gpio/gpio.h> > >>> +#include "mt8173.dtsi" > >>> + > >>> +/ { > >>> + aliases { > >>> + serial0 = &uart0; > >>> + serial1 = &uart1; > >>> + serial2 = &uart2; > >>> + serial3 = &uart3; > >>> + }; > >>> + > >>> + memory@40000000 { > >>> + device_type = "memory"; > >>> + reg = <0 0x40000000 0 0x80000000>; > >>> + }; > >>> + > >>> + backlight_lcd: backlight_lcd { > >>> + compatible = "pwm-backlight"; > >>> + pwms = <&pwm0 0 1000000>; > >>> + brightness-levels = < > >>> + 0 16 32 48 64 80 96 112 > >>> + 128 144 160 176 192 208 224 240 > >>> + 255 > >>> + >; > >>> + default-brightness-level = <9>; > >>> + power-supply = <&bl_fixed_reg>; > >>> + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; > >>> + > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&disp_pwm0_pins>; > >>> + status = "okay"; > >>> + }; > >>> + > >>> + bl_fixed_reg: fixedregulator@2 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "bl_fixed"; > >>> + regulator-min-microvolt = <1800000>; > >>> + regulator-max-microvolt = <1800000>; > >>> + startup-delay-us = <1000>; > >>> + enable-active-high; > >>> + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&bl_fixed_pins>; > >>> + }; > >>> + > >>> + chosen { > >>> + stdout-path = &uart0; > >>> + }; > >>> + > >>> + gpio_keys: gpio-keys { > >>> + compatible = "gpio-keys"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&gpio_keys_pins>; > >>> + > >>> + lid { > >>> + label = "Lid"; > >>> + gpios = <&pio 69 GPIO_ACTIVE_LOW>; > >>> + linux,code = <0>; /* SW_LID */ > >>> + linux,input-type = <5>; /* EV_SW */ > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + power { > >>> + label = "Power"; > >>> + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; > >>> + linux,code = <KEY_POWER>; > >>> + debounce-interval = <30>; > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + tablet_mode { > >>> + label = "Tablet_mode"; > >>> + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; > >>> + linux,code = <1>; /* SW_TABLET_MODE */ > >> > >> can't we use SW_TABLET_MODE fomr linux-event-codes.h? > >> > > Will fix this. > >>> + linux,input-type = <5>; /* EV_SW */ > >> > >> same here. > >> > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + volume_down { > >>> + label = "Volume_down"; > >>> + gpios = <&pio 123 GPIO_ACTIVE_LOW>; > >>> + linux,code = <KEY_VOLUMEDOWN>; > >>> + }; > >>> + > >>> + volume_up { > >>> + label = "Volume_up"; > >>> + gpios = <&pio 124 GPIO_ACTIVE_LOW>; > >>> + linux,code = <KEY_VOLUMEUP>; > >>> + }; > >>> + }; > >>> + > >>> + panel: panel { > >>> + compatible = "lg,lp120up1"; > >>> + power-supply = <&panel_fixed_3v3>; > >>> + ddc-i2c-bus = <&i2c0>; > >>> + backlight = <&backlight_lcd>; > >>> + > >>> + port { > >>> + panel_in: endpoint { > >>> + remote-endpoint = <&ps8640_out>; > >>> + }; > >>> + }; > >>> + }; > >>> + > >>> + panel_fixed_3v3: regulator@1 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "PANEL_3V3"; > >>> + regulator-min-microvolt = <3300000>; > >>> + regulator-max-microvolt = <3300000>; > >>> + enable-active-high; > >>> + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&panel_fixed_pins>; > >>> + }; > >>> + > >>> + ps8640_fixed_1v2: regulator@2 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "PS8640_1V2"; > >>> + regulator-min-microvolt = <1200000>; > >>> + regulator-max-microvolt = <1200000>; > >>> + regulator-enable-ramp-delay = <2000>; > >>> + enable-active-high; > >>> + regulator-boot-on; > >>> + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&ps8640_fixed_pins>; > >>> + }; > >>> + > >>> + sdio_fixed_3v3: fixedregulator@0 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "3V3"; > >>> + regulator-min-microvolt = <3300000>; > >>> + regulator-max-microvolt = <3300000>; > >>> + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; > >> > >> we don't need to set the pincontroller mux here? > >> > > Will double check on schematic and add it. > >>> + }; > >>> + > >>> + sound: sound { > >>> + compatible = "mediatek,mt8173-rt5650"; > >>> + mediatek,audio-codec = <&rt5650 &hdmi0>; > >>> + mediatek,platform = <&afe>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&aud_i2s2>; > >>> + > >>> + mediatek,mclk = <1>; > >>> + codec-capture { > >>> + sound-dai = <&rt5650 1>; > >>> + }; > >>> + }; > >>> + > >>> + hdmicon: connector { > >>> + compatible = "hdmi-connector"; > >>> + label = "hdmi"; > >>> + type = "a"; > >>> + ddc-i2c-bus = <&hdmiddc0>; > >>> + > >>> + port { > >>> + hdmi_connector_in: endpoint { > >>> + remote-endpoint = <&hdmi0_out>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&cec { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&cpu0 { > >>> + proc-supply = <&mt6397_vpca15_reg>; > >>> +}; > >>> + > >>> +&cpu1 { > >>> + proc-supply = <&mt6397_vpca15_reg>; > >>> +}; > >>> + > >>> +&cpu2 { > >>> + proc-supply = <&da9211_vcpu_reg>; > >>> + sram-supply = <&mt6397_vsramca7_reg>; > >>> +}; > >>> + > >>> +&cpu3 { > >>> + proc-supply = <&da9211_vcpu_reg>; > >>> + sram-supply = <&mt6397_vsramca7_reg>; > >>> +}; > >>> + > >>> +&cpu_thermal { > >>> + sustainable-power = <4500>; /* milliwatts */ > >>> + trips { > >>> + threshold: trip-point@0 { > >>> + temperature = <60000>; > >>> + }; > >>> + > >>> + target: trip-point@1 { > >>> + temperature = <65000>; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&dsi0 { > >>> + status = "okay"; > >>> + ports { > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + port@1 { > >>> + dsi0_out: endpoint { > >>> + remote-endpoint = <&ps8640_in>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&dpi0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&hdmi0 { > >>> + status = "okay"; > >>> + ports { > >>> + port@1 { > >>> + reg = <1>; > >>> + > >>> + hdmi0_out: endpoint { > >>> + remote-endpoint = <&hdmi_connector_in>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&hdmi_phy { > >>> + status = "okay"; > >>> + mediatek,ibias = <0xc>; > >>> +}; > >>> + > >>> +&i2c0 { > >>> + status = "okay"; > >>> + > >>> + rt5650: audio-codec@1a { > >>> + compatible = "realtek,rt5650"; > >>> + reg = <0x1a>; > >>> + avdd-supply = <&mt6397_vgp1_reg>; > >>> + cpvdd-supply = <&mt6397_vcama_reg>; > >> > >> Hm, only defined for "realtek,rt5663", I suppose that's an inconsistency in the > >> binding documentation. Can you please double check? > >> > > This one? https://github.com/torvalds/linux/blob/master/sound/soc/codecs/rt5645.c#L3582 > > > > Yes, I checked myself and send a patch to fix the binding description, which was > missing the two suppliers. > > > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&rt5650_irq>; > >>> + #sound-dai-cells = <1>; > >>> + realtek,dmic1-data-pin = <2>; > >>> + realtek,jd-mode = <2>; > >>> + }; > >>> + > >>> + ps8640: edp-bridge@8 { > >>> + compatible = "parade,ps8640"; > >>> + reg = <0x8>; > >>> + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; > >>> + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&ps8640_pins>; > >>> + vdd12-supply = <&ps8640_fixed_1v2>; > >>> + vdd33-supply = <&mt6397_vgp2_reg>; > >>> + > >>> + ports { > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + port@0 { > >>> + reg = <0>; > >>> + > >>> + ps8640_in: endpoint { > >>> + remote-endpoint = <&dsi0_out>; > >>> + }; > >>> + }; > >>> + > >>> + port@1 { > >>> + reg = <1>; > >>> + > >>> + ps8640_out: endpoint { > >>> + remote-endpoint = <&panel_in>; > >>> + }; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&i2c1 { > >>> + clock-frequency = <1500000>; > >>> + status = "okay"; > >>> + > >>> + da9211: da9211@68 { > >>> + compatible = "dlg,da9211"; > >>> + reg = <0x68>; > >>> + > >> > >> no interrupts? binding description have this stated as required. what happens > >> when the device raises an interrupt? > > Will double check on schematic and add it. > >> > >>> + regulators { > >>> + da9211_vcpu_reg: BUCKA { > >>> + regulator-name = "VBUCKA"; > >>> + regulator-min-microvolt = < 700000>; > >>> + regulator-max-microvolt = <1310000>; > >>> + regulator-min-microamp = <2000000>; > >>> + regulator-max-microamp = <4400000>; > >>> + regulator-ramp-delay = <10000>; > >>> + regulator-always-on; > >>> + regulator-allowed-modes = <0 1>; > >>> + }; > >>> + > >>> + da9211_vgpu_reg: BUCKB { > >>> + regulator-name = "VBUCKB"; > >>> + regulator-min-microvolt = < 700000>; > >>> + regulator-max-microvolt = <1310000>; > >>> + regulator-min-microamp = <2000000>; > >>> + regulator-max-microamp = <3000000>; > >>> + regulator-ramp-delay = <10000>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&i2c2 { > >>> + status = "okay"; > >>> + > >>> + tpm: tpm@20 { > >>> + compatible = "infineon,slb9645tt"; > >>> + reg = <0x20>; > >>> + powered-while-suspended; > >>> + }; > >>> +}; > >>> + > >>> +&i2c3 { > >>> + clock-frequency = <400000>; > >>> + status = "okay"; > >>> + > >>> + touchscreen: touchscreen@10 { > >>> + compatible = "elan,ekth3500"; > >>> + reg = <0x10>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >>> +}; > >>> + > >>> +&i2c4 { > >>> + clock-frequency = <400000>; > >>> + status = "okay"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&trackpad_irq>; > >> > >> Why not move the pinctrl properties into the trackpad node? > >> > > As second source trackpad device and original device shares same > > compatible string (rev id), we need to add 2nd trackpad node here. > > According to previous log (since I don't have a second source trackpad > > device to test), adding pinctrl in each trackpad node, there would be > > error: > > [ 0.643501] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin URXD3 > > already requested by 7-0015; cannot claim for 7-002c > > [ 0.643525] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin-117 > > (7-002c) status -22 > > [ 0.643548] mediatek-mt8173-pinctrl 1000b000.pinctrl: could not > > request pin 117 (URXD3) from group URXD3 on device 1000b000.pinctrl > > [ 0.643568] i2c_hid 7-002c: Error applying setting, reverse things back > > [ 0.643867] i2c 7-002c: Driver i2c_hid requests probe deferral > > > > > > I think we can fix this, if we create the aforementioned two board DTS files. > Correct? > > >>> + > >>> + trackpad: trackpad@15 { > >>> + compatible = "elan,ekth3000"; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > >>> + reg = <0x15>; > >>> + vcc-supply = <&mt6397_vgp6_reg>; > >>> + wakeup-source; > >>> + }; > >>> +}; > >>> + > >>> +&mipi_tx0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&mmc0 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc0_pins_default>; > >>> + pinctrl-1 = <&mmc0_pins_uhs>; > >>> + bus-width = <8>; > >>> + max-frequency = <200000000>; > >>> + cap-mmc-highspeed; > >>> + mmc-hs200-1_8v; > >>> + mmc-hs400-1_8v; > >>> + cap-mmc-hw-reset; > >>> + hs400-ds-delay = <0x14015>; > >>> + mediatek,hs200-cmd-int-delay=<30>; > >>> + mediatek,hs400-cmd-int-delay=<14>; > >>> + mediatek,hs400-cmd-resp-sel-rising; > >>> + vmmc-supply = <&mt6397_vemc_3v3_reg>; > >>> + vqmmc-supply = <&mt6397_vio18_reg>; > >>> + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; > >>> + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; > >>> + non-removable; > >>> +}; > >>> + > >>> +&mmc1 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc1_pins_default>; > >>> + pinctrl-1 = <&mmc1_pins_uhs>; > >>> + bus-width = <4>; > >>> + max-frequency = <200000000>; > >>> + cap-sd-highspeed; > >>> + sd-uhs-sdr50; > >>> + sd-uhs-sdr104; > >>> + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; > >>> + vmmc-supply = <&mt6397_vmch_reg>; > >>> + vqmmc-supply = <&mt6397_vmc_reg>; > >>> +}; > >>> + > >>> +&mmc3 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc3_pins_default>; > >>> + pinctrl-1 = <&mmc3_pins_uhs>; > >>> + bus-width = <4>; > >>> + max-frequency = <200000000>; > >>> + cap-sd-highspeed; > >>> + sd-uhs-sdr50; > >>> + sd-uhs-sdr104; > >>> + sdr104-clk-delay = <5>; > >> > >> Not an upstream property, please delete it. > >> > >>> + keep-power-in-suspend; > >>> + enable-sdio-wakeup; > >>> + cap-sdio-irq; > >>> + vmmc-supply = <&sdio_fixed_3v3>; > >>> + vqmmc-supply = <&mt6397_vgp3_reg>; > >>> + non-removable; > >>> + cap-power-off-card; > >>> + > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + btmrvl: btmrvl@2 { > >>> + compatible = "marvell,sd8897-bt"; > >>> + reg = <2>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; > >>> + marvell,wakeup-pin = /bits/ 16 <0x0d>; > >>> + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; > >>> + }; > >>> + > >>> + mwifiex: mwifiex@1 { > >>> + compatible = "marvell,sd8897"; > >>> + reg = <1>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; > >>> + marvell,wakeup-pin = <3>; > >>> + marvell,caldata_ed_mac = /bits/ 8 < > >>> +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > >>> +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > >>> + >; > >> > >> Not an upstream property, please delete. > >> > >>> + }; > >>> +}; > >>> + > >>> +&nor_flash { > >>> + status = "okay"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&nor_gpio1_pins>; > >>> + bus-width = <8>; > >>> + max-frequency = <50000000>; > >>> + non-removable; > >>> + flash@0 { > >>> + compatible = "jedec,spi-nor"; > >>> + reg = <0>; > >>> + }; > >>> +}; > >>> + > >>> +&pio { > >>> + aud_i2s2: aud_i2s2 { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, > >>> + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, > >>> + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, > >>> + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, > >>> + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, > >>> + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, > >>> + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; > >>> + bias-pull-down; > >>> + }; > >>> + }; > >>> + > >>> + bl_fixed_pins: bl_fixed_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + bt_wake_pins: bt_wake_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + disp_pwm0_pins: disp_pwm0_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + gpio_keys_pins: gpio_keys_pins { > >>> + volume_pins { > >>> + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, > >>> + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + tablet_mode_pins { > >>> + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + hdmi_mux_pins: hdmi_mux_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; > >>> + }; > >>> + }; > >>> + > >>> + mmc0_pins_default: mmc0default { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > >>> + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > >>> + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > >>> + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > >>> + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > >>> + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > >>> + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > >>> + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > >>> + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > >>> + bias-pull-down; > >> > >> identation. > >> > >>> + }; > >>> + > >>> + pins_rst { > >>> + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_default: mmc1default { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > >>> + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > >>> + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > >>> + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > >>> + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > >>> + bias-pull-down; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + }; > >>> + > >>> + pins_insert { > >>> + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc3_pins_default: mmc3default { > >>> + pins_dat { > >>> + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > >>> + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > >>> + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > >>> + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_cmd { > >>> + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > >>> + bias-pull-down; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + }; > >>> + > >>> + pins_pdn { > >>> + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + mmc0_pins_uhs: mmc0 { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > >>> + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > >>> + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > >>> + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > >>> + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > >>> + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > >>> + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > >>> + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > >>> + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_6mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > >>> + drive-strength = <MTK_DRIVE_6mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > >>> + }; > >>> + > >>> + pins_ds { > >>> + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; > >>> + drive-strength = <MTK_DRIVE_10mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > >>> + }; > >>> + > >>> + pins_rst { > >>> + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_uhs: mmc1 { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > >>> + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > >>> + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > >>> + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > >>> + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_6mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + }; > >>> + > >>> + mmc3_pins_uhs: mmc3 { > >>> + pins_dat { > >>> + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > >>> + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > >>> + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > >>> + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_cmd { > >>> + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + }; > >>> + > >>> + nor_gpio1_pins: nor { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, > >>> + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, > >>> + <MT8173_PIN_8_EINT8__FUNC_SFIN>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins2 { > >>> + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + panel_fixed_pins: panel_fixed_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; > >>> + }; > >>> + }; > >>> + > >>> + ps8640_pins: ps8640_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, > >>> + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, > >>> + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; > >>> + }; > >>> + }; > >>> + > >>> + ps8640_fixed_pins: ps8640_fixed_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; > >>> + }; > >>> + }; > >>> + > >>> + rt5650_irq: rt5650_irq { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; > >>> + bias-pull-down; > >>> + }; > >>> + }; > >>> + > >>> + spi_pins_a: spi1 { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_spi { > >>> + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, > >>> + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, > >>> + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, > >>> + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; > >>> + bias-disable; > >>> + }; > >>> + }; > >>> + > >>> + trackpad_irq: trackpad_irq { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; > >>> + input-enable; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + usb_pins: usb@0 { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; > >>> + output-high; > >>> + bias-disable; > >>> + }; > >>> + }; > >>> + > >>> + wifi_wake_pins: wifi_wake_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&pwm0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&pwrap { > >>> + pmic: mt6397 { > >>> + compatible = "mediatek,mt6397"; > >>> + #address-cells = <1>; > >>> + #size-cells = <1>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > >>> + interrupt-controller; > >>> + #interrupt-cells = <2>; > >>> + > >>> + mt6397rtc: mt6397rtc { > >> > >> AFAIK this should be > >> rtc: mt6397rtc { > >> > >> Please fix that for all subnodes. > >> > > Will fix in next version > >>> + compatible = "mediatek,mt6397-rtc"; > >>> + }; > >>> + > >>> + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { > >>> + compatible = "mediatek,mt6397-pctl-pmic-syscfg", > >>> + "syscon"; > >>> + reg = <0 0x0000c000 0 0x0108>; > >> > >> not an upstream compatible, please delete the node. > >> > > I think my comment was not correct. I'll have to dig more to understand why we > have a compatible without a binding description. > Here's a similar syscon node that is in a binding document's example: syscfg_pctl_a: syscfg-pctl-a@10005000 { compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon"; reg = <0 0x10005000 0 0x1000>; }; https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt#L81 > Regards, > Matthias _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board @ 2020-01-15 8:53 ` Hsin-Yi Wang 0 siblings, 0 replies; 42+ messages in thread From: Hsin-Yi Wang @ 2020-01-15 8:53 UTC (permalink / raw) To: Matthias Brugger Cc: Mark Rutland, Devicetree List, Nicolas Boichat, lkml, Rob Herring, linux-mediatek, Enric Balletbo i Serra, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Tue, Jan 14, 2020 at 11:10 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: > > > > On 13/01/2020 19:01, Hsin-Yi Wang wrote: > > On Fri, Jan 10, 2020 at 9:42 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: > >> > >> > > Thanks, I will address the comments and send next version > >> > >> On 10/01/2020 08:37, Hsin-Yi Wang wrote: > >>> Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > >>> SoC. > >>> > >>> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > >>> --- > >>> Changes in v2: > >>> - remove downstream nodes and unused nodes > >>> - use GPIO_ACTIVE_LOW for ps8640 gpios > >>> - move trackpad to hana > >>> --- > >>> arch/arm64/boot/dts/mediatek/Makefile | 3 + > >>> .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > >>> .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > >>> .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > >>> arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > >>> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > >>> 6 files changed, 1161 insertions(+) > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> > >>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > >>> index 458bbc422a94..b45a45a565a1 100644 > >>> --- a/arch/arm64/boot/dts/mediatek/Makefile > >>> +++ b/arch/arm64/boot/dts/mediatek/Makefile > >>> @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> new file mode 100644 > >>> index 000000000000..a3616bc3d859 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> @@ -0,0 +1,27 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2019 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm-hana.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Hana rev7 board"; > >>> + compatible = "google,hana-rev7", "mediatek,mt8173"; > >>> +}; > >>> + > >>> +&cpu_thermal { > >>> + trips { > >>> + cpu_crit: cpu_crit@0 { > >>> + temperature = <100000>; > >>> + type = "critical"; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&gpio_keys { > >>> + /delete-node/tablet_mode; > >>> + /delete-node/volume_down; > >>> + /delete-node/volume_up; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> new file mode 100644 > >>> index 000000000000..8cbcc75192e3 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> @@ -0,0 +1,16 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm-hana.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Hana rev0 board"; > > If we can't make this more verbose, at least delete rev0, that's confusing. > Should the name not be "Google Hana"? > > >>> + compatible = "google,hana-rev6", > >>> + "google,hana-rev5", "google,hana-rev4", > >>> + "google,hana-rev3", "google,hana-rev2", > >>> + "google,hana-rev1", "google,hana-rev0", > >>> + "google,hana", "mediatek,mt8173"; > >>> +}; > >> > >> I'm a bit confused about all this versions. Do you want to keep them for > >> internal use, as I suppose only rev6 is available to the general public, > >> correct? I'm fine with keeping the old revisions if that's of use for you, > >> otherwise I'd prefer to delete them. > > According to internal feedback system, at least rev3, rev6, rev7 are > > in general public. I can delete rev0~rev2, since they are earlier > > version device. > > If you don't plan to use the rev0 to rev2 in-house, then we can delete them. > > >> > >> Model name could be more verbose. > >> > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> new file mode 100644 > >>> index 000000000000..35e12b290947 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> @@ -0,0 +1,60 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +#include "mt8173-elm.dtsi" > >>> + > >>> +&i2c0 { > >>> + clock-frequency = <200000>; > >>> +}; > >>> + > >>> +&i2c3 { > >>> + touchscreen2: touchscreen@34 { > >>> + compatible = "melfas,mip4_ts"; > >>> + reg = <0x34>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >>> + > >>> + touchscreen3: touchscreen@20 { > >>> + compatible = "hid-over-i2c"; > >>> + reg = <0x20>; > >>> + hid-descr-addr = <0x0020>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >> > >> In v1 you mentioned: > >> "Partners wants to increase touchpad and touchscreen source (they choose > >> synaptics) for hana 300e, and synaptics uses hid-over-i2c driver." > >> > >> So the partner uses the same compatible (google,hana-rev6?) for both devices? > >> > > Confirmed with others, second source devices share same compatible. > > We should create independent dts for the different boards. Like it is done for > gru-scarlett. Doesn't the FW provide the sku number in the compatible string? > > >>> +}; > >>> + > >>> +&i2c4 { > >>> + trackpad2: trackpad@2c { > >>> + compatible = "hid-over-i2c"; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > >>> + reg = <0x2c>; > >>> + hid-descr-addr = <0x0020>; > >>> + wakeup-source; > >>> + }; > >>> +}; > >>> + > >>> +&mmc1 { > >>> + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; > >>> +}; > >>> + > >>> +&pio { > >>> + hdmi_mux_pins: hdmi_mux_pins { > >>> + pins2 { > >>> + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; > >>> + bias-pull-up; > >>> + output-high; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_default: mmc1default { > >>> + pins_wp { > >>> + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; > >>> + input-enable; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> new file mode 100644 > >>> index 000000000000..e5da2355760e > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> @@ -0,0 +1,15 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Elm board"; > >>> + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", > >>> + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", > >>> + "google,elm-rev2", "google,elm-rev1", > >>> + "google,elm", "mediatek,mt8173"; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> new file mode 100644 > >>> index 000000000000..2ac738bebe04 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> @@ -0,0 +1,1040 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +#include <dt-bindings/input/input.h> > >>> +#include <dt-bindings/gpio/gpio.h> > >>> +#include "mt8173.dtsi" > >>> + > >>> +/ { > >>> + aliases { > >>> + serial0 = &uart0; > >>> + serial1 = &uart1; > >>> + serial2 = &uart2; > >>> + serial3 = &uart3; > >>> + }; > >>> + > >>> + memory@40000000 { > >>> + device_type = "memory"; > >>> + reg = <0 0x40000000 0 0x80000000>; > >>> + }; > >>> + > >>> + backlight_lcd: backlight_lcd { > >>> + compatible = "pwm-backlight"; > >>> + pwms = <&pwm0 0 1000000>; > >>> + brightness-levels = < > >>> + 0 16 32 48 64 80 96 112 > >>> + 128 144 160 176 192 208 224 240 > >>> + 255 > >>> + >; > >>> + default-brightness-level = <9>; > >>> + power-supply = <&bl_fixed_reg>; > >>> + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; > >>> + > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&disp_pwm0_pins>; > >>> + status = "okay"; > >>> + }; > >>> + > >>> + bl_fixed_reg: fixedregulator@2 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "bl_fixed"; > >>> + regulator-min-microvolt = <1800000>; > >>> + regulator-max-microvolt = <1800000>; > >>> + startup-delay-us = <1000>; > >>> + enable-active-high; > >>> + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&bl_fixed_pins>; > >>> + }; > >>> + > >>> + chosen { > >>> + stdout-path = &uart0; > >>> + }; > >>> + > >>> + gpio_keys: gpio-keys { > >>> + compatible = "gpio-keys"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&gpio_keys_pins>; > >>> + > >>> + lid { > >>> + label = "Lid"; > >>> + gpios = <&pio 69 GPIO_ACTIVE_LOW>; > >>> + linux,code = <0>; /* SW_LID */ > >>> + linux,input-type = <5>; /* EV_SW */ > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + power { > >>> + label = "Power"; > >>> + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; > >>> + linux,code = <KEY_POWER>; > >>> + debounce-interval = <30>; > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + tablet_mode { > >>> + label = "Tablet_mode"; > >>> + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; > >>> + linux,code = <1>; /* SW_TABLET_MODE */ > >> > >> can't we use SW_TABLET_MODE fomr linux-event-codes.h? > >> > > Will fix this. > >>> + linux,input-type = <5>; /* EV_SW */ > >> > >> same here. > >> > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + volume_down { > >>> + label = "Volume_down"; > >>> + gpios = <&pio 123 GPIO_ACTIVE_LOW>; > >>> + linux,code = <KEY_VOLUMEDOWN>; > >>> + }; > >>> + > >>> + volume_up { > >>> + label = "Volume_up"; > >>> + gpios = <&pio 124 GPIO_ACTIVE_LOW>; > >>> + linux,code = <KEY_VOLUMEUP>; > >>> + }; > >>> + }; > >>> + > >>> + panel: panel { > >>> + compatible = "lg,lp120up1"; > >>> + power-supply = <&panel_fixed_3v3>; > >>> + ddc-i2c-bus = <&i2c0>; > >>> + backlight = <&backlight_lcd>; > >>> + > >>> + port { > >>> + panel_in: endpoint { > >>> + remote-endpoint = <&ps8640_out>; > >>> + }; > >>> + }; > >>> + }; > >>> + > >>> + panel_fixed_3v3: regulator@1 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "PANEL_3V3"; > >>> + regulator-min-microvolt = <3300000>; > >>> + regulator-max-microvolt = <3300000>; > >>> + enable-active-high; > >>> + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&panel_fixed_pins>; > >>> + }; > >>> + > >>> + ps8640_fixed_1v2: regulator@2 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "PS8640_1V2"; > >>> + regulator-min-microvolt = <1200000>; > >>> + regulator-max-microvolt = <1200000>; > >>> + regulator-enable-ramp-delay = <2000>; > >>> + enable-active-high; > >>> + regulator-boot-on; > >>> + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&ps8640_fixed_pins>; > >>> + }; > >>> + > >>> + sdio_fixed_3v3: fixedregulator@0 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "3V3"; > >>> + regulator-min-microvolt = <3300000>; > >>> + regulator-max-microvolt = <3300000>; > >>> + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; > >> > >> we don't need to set the pincontroller mux here? > >> > > Will double check on schematic and add it. > >>> + }; > >>> + > >>> + sound: sound { > >>> + compatible = "mediatek,mt8173-rt5650"; > >>> + mediatek,audio-codec = <&rt5650 &hdmi0>; > >>> + mediatek,platform = <&afe>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&aud_i2s2>; > >>> + > >>> + mediatek,mclk = <1>; > >>> + codec-capture { > >>> + sound-dai = <&rt5650 1>; > >>> + }; > >>> + }; > >>> + > >>> + hdmicon: connector { > >>> + compatible = "hdmi-connector"; > >>> + label = "hdmi"; > >>> + type = "a"; > >>> + ddc-i2c-bus = <&hdmiddc0>; > >>> + > >>> + port { > >>> + hdmi_connector_in: endpoint { > >>> + remote-endpoint = <&hdmi0_out>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&cec { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&cpu0 { > >>> + proc-supply = <&mt6397_vpca15_reg>; > >>> +}; > >>> + > >>> +&cpu1 { > >>> + proc-supply = <&mt6397_vpca15_reg>; > >>> +}; > >>> + > >>> +&cpu2 { > >>> + proc-supply = <&da9211_vcpu_reg>; > >>> + sram-supply = <&mt6397_vsramca7_reg>; > >>> +}; > >>> + > >>> +&cpu3 { > >>> + proc-supply = <&da9211_vcpu_reg>; > >>> + sram-supply = <&mt6397_vsramca7_reg>; > >>> +}; > >>> + > >>> +&cpu_thermal { > >>> + sustainable-power = <4500>; /* milliwatts */ > >>> + trips { > >>> + threshold: trip-point@0 { > >>> + temperature = <60000>; > >>> + }; > >>> + > >>> + target: trip-point@1 { > >>> + temperature = <65000>; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&dsi0 { > >>> + status = "okay"; > >>> + ports { > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + port@1 { > >>> + dsi0_out: endpoint { > >>> + remote-endpoint = <&ps8640_in>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&dpi0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&hdmi0 { > >>> + status = "okay"; > >>> + ports { > >>> + port@1 { > >>> + reg = <1>; > >>> + > >>> + hdmi0_out: endpoint { > >>> + remote-endpoint = <&hdmi_connector_in>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&hdmi_phy { > >>> + status = "okay"; > >>> + mediatek,ibias = <0xc>; > >>> +}; > >>> + > >>> +&i2c0 { > >>> + status = "okay"; > >>> + > >>> + rt5650: audio-codec@1a { > >>> + compatible = "realtek,rt5650"; > >>> + reg = <0x1a>; > >>> + avdd-supply = <&mt6397_vgp1_reg>; > >>> + cpvdd-supply = <&mt6397_vcama_reg>; > >> > >> Hm, only defined for "realtek,rt5663", I suppose that's an inconsistency in the > >> binding documentation. Can you please double check? > >> > > This one? https://github.com/torvalds/linux/blob/master/sound/soc/codecs/rt5645.c#L3582 > > > > Yes, I checked myself and send a patch to fix the binding description, which was > missing the two suppliers. > > > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&rt5650_irq>; > >>> + #sound-dai-cells = <1>; > >>> + realtek,dmic1-data-pin = <2>; > >>> + realtek,jd-mode = <2>; > >>> + }; > >>> + > >>> + ps8640: edp-bridge@8 { > >>> + compatible = "parade,ps8640"; > >>> + reg = <0x8>; > >>> + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; > >>> + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&ps8640_pins>; > >>> + vdd12-supply = <&ps8640_fixed_1v2>; > >>> + vdd33-supply = <&mt6397_vgp2_reg>; > >>> + > >>> + ports { > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + port@0 { > >>> + reg = <0>; > >>> + > >>> + ps8640_in: endpoint { > >>> + remote-endpoint = <&dsi0_out>; > >>> + }; > >>> + }; > >>> + > >>> + port@1 { > >>> + reg = <1>; > >>> + > >>> + ps8640_out: endpoint { > >>> + remote-endpoint = <&panel_in>; > >>> + }; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&i2c1 { > >>> + clock-frequency = <1500000>; > >>> + status = "okay"; > >>> + > >>> + da9211: da9211@68 { > >>> + compatible = "dlg,da9211"; > >>> + reg = <0x68>; > >>> + > >> > >> no interrupts? binding description have this stated as required. what happens > >> when the device raises an interrupt? > > Will double check on schematic and add it. > >> > >>> + regulators { > >>> + da9211_vcpu_reg: BUCKA { > >>> + regulator-name = "VBUCKA"; > >>> + regulator-min-microvolt = < 700000>; > >>> + regulator-max-microvolt = <1310000>; > >>> + regulator-min-microamp = <2000000>; > >>> + regulator-max-microamp = <4400000>; > >>> + regulator-ramp-delay = <10000>; > >>> + regulator-always-on; > >>> + regulator-allowed-modes = <0 1>; > >>> + }; > >>> + > >>> + da9211_vgpu_reg: BUCKB { > >>> + regulator-name = "VBUCKB"; > >>> + regulator-min-microvolt = < 700000>; > >>> + regulator-max-microvolt = <1310000>; > >>> + regulator-min-microamp = <2000000>; > >>> + regulator-max-microamp = <3000000>; > >>> + regulator-ramp-delay = <10000>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&i2c2 { > >>> + status = "okay"; > >>> + > >>> + tpm: tpm@20 { > >>> + compatible = "infineon,slb9645tt"; > >>> + reg = <0x20>; > >>> + powered-while-suspended; > >>> + }; > >>> +}; > >>> + > >>> +&i2c3 { > >>> + clock-frequency = <400000>; > >>> + status = "okay"; > >>> + > >>> + touchscreen: touchscreen@10 { > >>> + compatible = "elan,ekth3500"; > >>> + reg = <0x10>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >>> +}; > >>> + > >>> +&i2c4 { > >>> + clock-frequency = <400000>; > >>> + status = "okay"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&trackpad_irq>; > >> > >> Why not move the pinctrl properties into the trackpad node? > >> > > As second source trackpad device and original device shares same > > compatible string (rev id), we need to add 2nd trackpad node here. > > According to previous log (since I don't have a second source trackpad > > device to test), adding pinctrl in each trackpad node, there would be > > error: > > [ 0.643501] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin URXD3 > > already requested by 7-0015; cannot claim for 7-002c > > [ 0.643525] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin-117 > > (7-002c) status -22 > > [ 0.643548] mediatek-mt8173-pinctrl 1000b000.pinctrl: could not > > request pin 117 (URXD3) from group URXD3 on device 1000b000.pinctrl > > [ 0.643568] i2c_hid 7-002c: Error applying setting, reverse things back > > [ 0.643867] i2c 7-002c: Driver i2c_hid requests probe deferral > > > > > > I think we can fix this, if we create the aforementioned two board DTS files. > Correct? > > >>> + > >>> + trackpad: trackpad@15 { > >>> + compatible = "elan,ekth3000"; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > >>> + reg = <0x15>; > >>> + vcc-supply = <&mt6397_vgp6_reg>; > >>> + wakeup-source; > >>> + }; > >>> +}; > >>> + > >>> +&mipi_tx0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&mmc0 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc0_pins_default>; > >>> + pinctrl-1 = <&mmc0_pins_uhs>; > >>> + bus-width = <8>; > >>> + max-frequency = <200000000>; > >>> + cap-mmc-highspeed; > >>> + mmc-hs200-1_8v; > >>> + mmc-hs400-1_8v; > >>> + cap-mmc-hw-reset; > >>> + hs400-ds-delay = <0x14015>; > >>> + mediatek,hs200-cmd-int-delay=<30>; > >>> + mediatek,hs400-cmd-int-delay=<14>; > >>> + mediatek,hs400-cmd-resp-sel-rising; > >>> + vmmc-supply = <&mt6397_vemc_3v3_reg>; > >>> + vqmmc-supply = <&mt6397_vio18_reg>; > >>> + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; > >>> + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; > >>> + non-removable; > >>> +}; > >>> + > >>> +&mmc1 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc1_pins_default>; > >>> + pinctrl-1 = <&mmc1_pins_uhs>; > >>> + bus-width = <4>; > >>> + max-frequency = <200000000>; > >>> + cap-sd-highspeed; > >>> + sd-uhs-sdr50; > >>> + sd-uhs-sdr104; > >>> + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; > >>> + vmmc-supply = <&mt6397_vmch_reg>; > >>> + vqmmc-supply = <&mt6397_vmc_reg>; > >>> +}; > >>> + > >>> +&mmc3 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc3_pins_default>; > >>> + pinctrl-1 = <&mmc3_pins_uhs>; > >>> + bus-width = <4>; > >>> + max-frequency = <200000000>; > >>> + cap-sd-highspeed; > >>> + sd-uhs-sdr50; > >>> + sd-uhs-sdr104; > >>> + sdr104-clk-delay = <5>; > >> > >> Not an upstream property, please delete it. > >> > >>> + keep-power-in-suspend; > >>> + enable-sdio-wakeup; > >>> + cap-sdio-irq; > >>> + vmmc-supply = <&sdio_fixed_3v3>; > >>> + vqmmc-supply = <&mt6397_vgp3_reg>; > >>> + non-removable; > >>> + cap-power-off-card; > >>> + > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + btmrvl: btmrvl@2 { > >>> + compatible = "marvell,sd8897-bt"; > >>> + reg = <2>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; > >>> + marvell,wakeup-pin = /bits/ 16 <0x0d>; > >>> + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; > >>> + }; > >>> + > >>> + mwifiex: mwifiex@1 { > >>> + compatible = "marvell,sd8897"; > >>> + reg = <1>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; > >>> + marvell,wakeup-pin = <3>; > >>> + marvell,caldata_ed_mac = /bits/ 8 < > >>> +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > >>> +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > >>> + >; > >> > >> Not an upstream property, please delete. > >> > >>> + }; > >>> +}; > >>> + > >>> +&nor_flash { > >>> + status = "okay"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&nor_gpio1_pins>; > >>> + bus-width = <8>; > >>> + max-frequency = <50000000>; > >>> + non-removable; > >>> + flash@0 { > >>> + compatible = "jedec,spi-nor"; > >>> + reg = <0>; > >>> + }; > >>> +}; > >>> + > >>> +&pio { > >>> + aud_i2s2: aud_i2s2 { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, > >>> + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, > >>> + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, > >>> + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, > >>> + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, > >>> + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, > >>> + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; > >>> + bias-pull-down; > >>> + }; > >>> + }; > >>> + > >>> + bl_fixed_pins: bl_fixed_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + bt_wake_pins: bt_wake_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + disp_pwm0_pins: disp_pwm0_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + gpio_keys_pins: gpio_keys_pins { > >>> + volume_pins { > >>> + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, > >>> + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + tablet_mode_pins { > >>> + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + hdmi_mux_pins: hdmi_mux_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; > >>> + }; > >>> + }; > >>> + > >>> + mmc0_pins_default: mmc0default { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > >>> + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > >>> + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > >>> + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > >>> + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > >>> + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > >>> + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > >>> + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > >>> + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > >>> + bias-pull-down; > >> > >> identation. > >> > >>> + }; > >>> + > >>> + pins_rst { > >>> + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_default: mmc1default { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > >>> + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > >>> + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > >>> + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > >>> + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > >>> + bias-pull-down; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + }; > >>> + > >>> + pins_insert { > >>> + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc3_pins_default: mmc3default { > >>> + pins_dat { > >>> + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > >>> + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > >>> + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > >>> + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_cmd { > >>> + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > >>> + bias-pull-down; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + }; > >>> + > >>> + pins_pdn { > >>> + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + mmc0_pins_uhs: mmc0 { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > >>> + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > >>> + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > >>> + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > >>> + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > >>> + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > >>> + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > >>> + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > >>> + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_6mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > >>> + drive-strength = <MTK_DRIVE_6mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > >>> + }; > >>> + > >>> + pins_ds { > >>> + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; > >>> + drive-strength = <MTK_DRIVE_10mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > >>> + }; > >>> + > >>> + pins_rst { > >>> + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_uhs: mmc1 { > >>> + pins_cmd_dat { > >>> + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > >>> + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > >>> + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > >>> + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > >>> + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_6mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + }; > >>> + > >>> + mmc3_pins_uhs: mmc3 { > >>> + pins_dat { > >>> + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > >>> + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > >>> + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > >>> + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_cmd { > >>> + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > >>> + drive-strength = <MTK_DRIVE_8mA>; > >>> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > >>> + }; > >>> + }; > >>> + > >>> + nor_gpio1_pins: nor { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, > >>> + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, > >>> + <MT8173_PIN_8_EINT8__FUNC_SFIN>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins2 { > >>> + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; > >>> + input-enable; > >>> + drive-strength = <MTK_DRIVE_4mA>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + panel_fixed_pins: panel_fixed_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; > >>> + }; > >>> + }; > >>> + > >>> + ps8640_pins: ps8640_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, > >>> + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, > >>> + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; > >>> + }; > >>> + }; > >>> + > >>> + ps8640_fixed_pins: ps8640_fixed_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; > >>> + }; > >>> + }; > >>> + > >>> + rt5650_irq: rt5650_irq { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; > >>> + bias-pull-down; > >>> + }; > >>> + }; > >>> + > >>> + spi_pins_a: spi1 { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_spi { > >>> + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, > >>> + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, > >>> + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, > >>> + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; > >>> + bias-disable; > >>> + }; > >>> + }; > >>> + > >>> + trackpad_irq: trackpad_irq { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; > >>> + input-enable; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + usb_pins: usb@0 { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; > >>> + output-high; > >>> + bias-disable; > >>> + }; > >>> + }; > >>> + > >>> + wifi_wake_pins: wifi_wake_pins { > >>> + pins1 { > >>> + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&pwm0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&pwrap { > >>> + pmic: mt6397 { > >>> + compatible = "mediatek,mt6397"; > >>> + #address-cells = <1>; > >>> + #size-cells = <1>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > >>> + interrupt-controller; > >>> + #interrupt-cells = <2>; > >>> + > >>> + mt6397rtc: mt6397rtc { > >> > >> AFAIK this should be > >> rtc: mt6397rtc { > >> > >> Please fix that for all subnodes. > >> > > Will fix in next version > >>> + compatible = "mediatek,mt6397-rtc"; > >>> + }; > >>> + > >>> + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { > >>> + compatible = "mediatek,mt6397-pctl-pmic-syscfg", > >>> + "syscon"; > >>> + reg = <0 0x0000c000 0 0x0108>; > >> > >> not an upstream compatible, please delete the node. > >> > > I think my comment was not correct. I'll have to dig more to understand why we > have a compatible without a binding description. > Here's a similar syscon node that is in a binding document's example: syscfg_pctl_a: syscfg-pctl-a@10005000 { compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon"; reg = <0 0x10005000 0 0x1000>; }; https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt#L81 > Regards, > Matthias _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board 2020-01-15 8:53 ` Hsin-Yi Wang (?) @ 2020-01-15 16:14 ` Matthias Brugger -1 siblings, 0 replies; 42+ messages in thread From: Matthias Brugger @ 2020-01-15 16:14 UTC (permalink / raw) To: Hsin-Yi Wang Cc: moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE, Rob Herring, Mark Rutland, Devicetree List, lkml, linux-mediatek, Nicolas Boichat, Enric Balletbo i Serra, Daniel Kurtz On 15/01/2020 09:53, Hsin-Yi Wang wrote: > On Tue, Jan 14, 2020 at 11:10 PM Matthias Brugger > <matthias.bgg@gmail.com> wrote: >> >> >> >> On 13/01/2020 19:01, Hsin-Yi Wang wrote: >>> On Fri, Jan 10, 2020 at 9:42 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: >>>> >>>> >>> Thanks, I will address the comments and send next version >>>> >>>> On 10/01/2020 08:37, Hsin-Yi Wang wrote: >>>>> Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 >>>>> SoC. >>>>> >>>>> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> >>>>> --- >>>>> Changes in v2: >>>>> - remove downstream nodes and unused nodes >>>>> - use GPIO_ACTIVE_LOW for ps8640 gpios >>>>> - move trackpad to hana >>>>> --- >>>>> arch/arm64/boot/dts/mediatek/Makefile | 3 + >>>>> .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + >>>>> .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + >>>>> .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + >>>>> arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + >>>>> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ >>>>> 6 files changed, 1161 insertions(+) >>>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts >>>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts >>>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi >>>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts >>>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi >>>>> [...] >>>>> + compatible = "mediatek,mt6397-rtc"; >>>>> + }; >>>>> + >>>>> + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { >>>>> + compatible = "mediatek,mt6397-pctl-pmic-syscfg", >>>>> + "syscon"; >>>>> + reg = <0 0x0000c000 0 0x0108>; >>>> >>>> not an upstream compatible, please delete the node. >>>> >> >> I think my comment was not correct. I'll have to dig more to understand why we >> have a compatible without a binding description. >> > Here's a similar syscon node that is in a binding document's example: > > syscfg_pctl_a: syscfg-pctl-a@10005000 { > compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon"; > reg = <0 0x10005000 0 0x1000>; > }; > > https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt#L81 > Yes I know, that's why I said that my first comment was not correct. Just leave it in. Regards, Matthias ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board @ 2020-01-15 16:14 ` Matthias Brugger 0 siblings, 0 replies; 42+ messages in thread From: Matthias Brugger @ 2020-01-15 16:14 UTC (permalink / raw) To: Hsin-Yi Wang Cc: Mark Rutland, Devicetree List, Nicolas Boichat, lkml, Daniel Kurtz, Rob Herring, linux-mediatek, Enric Balletbo i Serra, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On 15/01/2020 09:53, Hsin-Yi Wang wrote: > On Tue, Jan 14, 2020 at 11:10 PM Matthias Brugger > <matthias.bgg@gmail.com> wrote: >> >> >> >> On 13/01/2020 19:01, Hsin-Yi Wang wrote: >>> On Fri, Jan 10, 2020 at 9:42 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: >>>> >>>> >>> Thanks, I will address the comments and send next version >>>> >>>> On 10/01/2020 08:37, Hsin-Yi Wang wrote: >>>>> Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 >>>>> SoC. >>>>> >>>>> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> >>>>> --- >>>>> Changes in v2: >>>>> - remove downstream nodes and unused nodes >>>>> - use GPIO_ACTIVE_LOW for ps8640 gpios >>>>> - move trackpad to hana >>>>> --- >>>>> arch/arm64/boot/dts/mediatek/Makefile | 3 + >>>>> .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + >>>>> .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + >>>>> .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + >>>>> arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + >>>>> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ >>>>> 6 files changed, 1161 insertions(+) >>>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts >>>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts >>>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi >>>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts >>>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi >>>>> [...] >>>>> + compatible = "mediatek,mt6397-rtc"; >>>>> + }; >>>>> + >>>>> + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { >>>>> + compatible = "mediatek,mt6397-pctl-pmic-syscfg", >>>>> + "syscon"; >>>>> + reg = <0 0x0000c000 0 0x0108>; >>>> >>>> not an upstream compatible, please delete the node. >>>> >> >> I think my comment was not correct. I'll have to dig more to understand why we >> have a compatible without a binding description. >> > Here's a similar syscon node that is in a binding document's example: > > syscfg_pctl_a: syscfg-pctl-a@10005000 { > compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon"; > reg = <0 0x10005000 0 0x1000>; > }; > > https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt#L81 > Yes I know, that's why I said that my first comment was not correct. Just leave it in. Regards, Matthias _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board @ 2020-01-15 16:14 ` Matthias Brugger 0 siblings, 0 replies; 42+ messages in thread From: Matthias Brugger @ 2020-01-15 16:14 UTC (permalink / raw) To: Hsin-Yi Wang Cc: Mark Rutland, Devicetree List, Nicolas Boichat, lkml, Rob Herring, linux-mediatek, Enric Balletbo i Serra, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On 15/01/2020 09:53, Hsin-Yi Wang wrote: > On Tue, Jan 14, 2020 at 11:10 PM Matthias Brugger > <matthias.bgg@gmail.com> wrote: >> >> >> >> On 13/01/2020 19:01, Hsin-Yi Wang wrote: >>> On Fri, Jan 10, 2020 at 9:42 PM Matthias Brugger <matthias.bgg@gmail.com> wrote: >>>> >>>> >>> Thanks, I will address the comments and send next version >>>> >>>> On 10/01/2020 08:37, Hsin-Yi Wang wrote: >>>>> Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 >>>>> SoC. >>>>> >>>>> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> >>>>> --- >>>>> Changes in v2: >>>>> - remove downstream nodes and unused nodes >>>>> - use GPIO_ACTIVE_LOW for ps8640 gpios >>>>> - move trackpad to hana >>>>> --- >>>>> arch/arm64/boot/dts/mediatek/Makefile | 3 + >>>>> .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + >>>>> .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + >>>>> .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + >>>>> arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + >>>>> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ >>>>> 6 files changed, 1161 insertions(+) >>>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts >>>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts >>>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi >>>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts >>>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi >>>>> [...] >>>>> + compatible = "mediatek,mt6397-rtc"; >>>>> + }; >>>>> + >>>>> + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { >>>>> + compatible = "mediatek,mt6397-pctl-pmic-syscfg", >>>>> + "syscon"; >>>>> + reg = <0 0x0000c000 0 0x0108>; >>>> >>>> not an upstream compatible, please delete the node. >>>> >> >> I think my comment was not correct. I'll have to dig more to understand why we >> have a compatible without a binding description. >> > Here's a similar syscon node that is in a binding document's example: > > syscfg_pctl_a: syscfg-pctl-a@10005000 { > compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon"; > reg = <0 0x10005000 0 0x1000>; > }; > > https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt#L81 > Yes I know, that's why I said that my first comment was not correct. Just leave it in. Regards, Matthias _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board 2020-01-10 7:37 ` Hsin-Yi Wang (?) @ 2020-01-13 9:29 ` Enric Balletbo i Serra -1 siblings, 0 replies; 42+ messages in thread From: Enric Balletbo i Serra @ 2020-01-13 9:29 UTC (permalink / raw) To: Hsin-Yi Wang, linux-arm-kernel Cc: Rob Herring, Mark Rutland, Matthias Brugger, devicetree, linux-kernel, linux-mediatek, Nicolas Boichat, Daniel Kurtz, Doug Anderson, Matthias Kaehlcke Hi Hsin-Yi, Apart from the maintainer comments, a few more comments ... cc'ing Matthias and Doug who I know played a bit with the pwm-backlight for the uprev of the veyron devices, and you might be interested in his feedback in general. On 10/1/20 8:37, Hsin-Yi Wang wrote: > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > SoC. > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > --- > Changes in v2: > - remove downstream nodes and unused nodes > - use GPIO_ACTIVE_LOW for ps8640 gpios > - move trackpad to hana > --- > arch/arm64/boot/dts/mediatek/Makefile | 3 + > .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > 6 files changed, 1161 insertions(+) > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > index 458bbc422a94..b45a45a565a1 100644 > --- a/arch/arm64/boot/dts/mediatek/Makefile > +++ b/arch/arm64/boot/dts/mediatek/Makefile > @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > new file mode 100644 > index 000000000000..a3616bc3d859 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > @@ -0,0 +1,27 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2019 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm-hana.dtsi" > + > +/ { > + model = "Mediatek Hana rev7 board"; > + compatible = "google,hana-rev7", "mediatek,mt8173"; > +}; > + > +&cpu_thermal { > + trips { > + cpu_crit: cpu_crit@0 { > + temperature = <100000>; > + type = "critical"; > + }; > + }; > +}; > + > +&gpio_keys { > + /delete-node/tablet_mode; > + /delete-node/volume_down; > + /delete-node/volume_up; > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > new file mode 100644 > index 000000000000..8cbcc75192e3 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > @@ -0,0 +1,16 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm-hana.dtsi" > + > +/ { > + model = "Mediatek Hana rev0 board"; > + compatible = "google,hana-rev6", > + "google,hana-rev5", "google,hana-rev4", > + "google,hana-rev3", "google,hana-rev2", > + "google,hana-rev1", "google,hana-rev0", > + "google,hana", "mediatek,mt8173"; nit: Usually we try to keep all aligned > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > new file mode 100644 > index 000000000000..35e12b290947 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > @@ -0,0 +1,60 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +#include "mt8173-elm.dtsi" > + > +&i2c0 { > + clock-frequency = <200000>; > +}; > + > +&i2c3 { > + touchscreen2: touchscreen@34 { > + compatible = "melfas,mip4_ts"; > + reg = <0x34>; > + interrupt-parent = <&pio>; > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + touchscreen3: touchscreen@20 { > + compatible = "hid-over-i2c"; > + reg = <0x20>; > + hid-descr-addr = <0x0020>; > + interrupt-parent = <&pio>; > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > + }; That still looks weird to me. I don't have the touchscreen working yet so I can really comment though. > +}; > + > +&i2c4 { > + trackpad2: trackpad@2c { > + compatible = "hid-over-i2c"; > + interrupt-parent = <&pio>; > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > + reg = <0x2c>; > + hid-descr-addr = <0x0020>; > + wakeup-source; The same for trackpads, still not working for me. There is no different compatible to distinguish between the boards that have one or the other trackpad? > + }; > +}; > + > +&mmc1 { > + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; > +}; > + > +&pio { > + hdmi_mux_pins: hdmi_mux_pins { > + pins2 { > + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; > + bias-pull-up; > + output-high; > + }; > + }; > + > + mmc1_pins_default: mmc1default { > + pins_wp { > + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; > + input-enable; > + bias-pull-up; > + }; > + }; > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > new file mode 100644 > index 000000000000..e5da2355760e > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > @@ -0,0 +1,15 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm.dtsi" > + > +/ { > + model = "Mediatek Elm board"; > + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", > + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", > + "google,elm-rev2", "google,elm-rev1", > + "google,elm", "mediatek,mt8173"; nit: keep it aligned. > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > new file mode 100644 > index 000000000000..2ac738bebe04 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > @@ -0,0 +1,1040 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/gpio/gpio.h> > +#include "mt8173.dtsi" > + > +/ { > + aliases { > + serial0 = &uart0; > + serial1 = &uart1; > + serial2 = &uart2; > + serial3 = &uart3; > + }; I think this should be in mt8173.dtsi? > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0 0x40000000 0 0x80000000>; > + }; > + > + backlight_lcd: backlight_lcd { nit: Not sure if you need to change or not, but this node is usually called backlight: backlight without the _lcd. Note that this imply a userspace change but /sys/class/backlight/backlight is more aligned with other boards (I guess) when you have only one backlight. See for example: git grep backlight arch/arm64/boot/* > + compatible = "pwm-backlight"; > + pwms = <&pwm0 0 1000000>; > + brightness-levels = < > + 0 16 32 48 64 80 96 112 > + 128 144 160 176 192 208 224 240 > + 255 > + >; > + default-brightness-level = <9>; The reason you see the display too dark is because userspace sets and remembers the default value you have using the above configuration which is only 16 levels. So after removing the two above properties you should set a new brightness from userspace. AFAIK 16 levels is not enough to have fancy backlight effects on Chrome OS userspace, at least is not enough for Rockchip devices so I suppose is the same for Mediatek. You have to options here. A) Remove brightness-levels and default-brightness-level. This will end with a non-linear brightness curve for the backlight up to 4095 levels. # cat max_brightness 4095 B) Use the num-interpolated-steps and default-brightness-level properties. This will end with a linear curve brightness. Similar to what is done for veyron devices but in this case with more levels because the PWM to control the backlight is 16-bits instead of 8-bits for veyron devices. * https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/rk3288-veyron-edp.dtsi#n42 My guess is that you're interested on option B here to be coherent with other Chromebooks. > + power-supply = <&bl_fixed_reg>; > + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&disp_pwm0_pins>; > + status = "okay"; > + }; > + > + bl_fixed_reg: fixedregulator@2 { > + compatible = "regulator-fixed"; > + regulator-name = "bl_fixed"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + startup-delay-us = <1000>; > + enable-active-high; > + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&bl_fixed_pins>; > + }; > + > + chosen { > + stdout-path = &uart0; You probably want stdout-path = "serial0:115200n8"; That way you'll get serial without needing to specify the console in the kernel command line. Otherwise doesn't work because baudrate is missing. > + }; > + > + gpio_keys: gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&gpio_keys_pins>; > + > + lid { > + label = "Lid"; > + gpios = <&pio 69 GPIO_ACTIVE_LOW>; > + linux,code = <0>; /* SW_LID */ > + linux,input-type = <5>; /* EV_SW */ > + gpio-key,wakeup; > + }; > + > + power { > + label = "Power"; > + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; > + linux,code = <KEY_POWER>; > + debounce-interval = <30>; > + gpio-key,wakeup; > + }; > + > + tablet_mode { > + label = "Tablet_mode"; > + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; > + linux,code = <1>; /* SW_TABLET_MODE */ > + linux,input-type = <5>; /* EV_SW */ > + gpio-key,wakeup; > + }; > + > + volume_down { > + label = "Volume_down"; > + gpios = <&pio 123 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEDOWN>; > + }; > + > + volume_up { > + label = "Volume_up"; > + gpios = <&pio 124 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEUP>; > + }; > + }; > + > + panel: panel { > + compatible = "lg,lp120up1"; > + power-supply = <&panel_fixed_3v3>; > + ddc-i2c-bus = <&i2c0>; > + backlight = <&backlight_lcd>; > + > + port { > + panel_in: endpoint { > + remote-endpoint = <&ps8640_out>; > + }; > + }; > + }; > + > + panel_fixed_3v3: regulator@1 { > + compatible = "regulator-fixed"; > + regulator-name = "PANEL_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + enable-active-high; > + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&panel_fixed_pins>; > + }; > + > + ps8640_fixed_1v2: regulator@2 { > + compatible = "regulator-fixed"; > + regulator-name = "PS8640_1V2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-enable-ramp-delay = <2000>; > + enable-active-high; > + regulator-boot-on; > + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&ps8640_fixed_pins>; > + }; > + > + sdio_fixed_3v3: fixedregulator@0 { > + compatible = "regulator-fixed"; > + regulator-name = "3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; > + }; > + > + sound: sound { > + compatible = "mediatek,mt8173-rt5650"; > + mediatek,audio-codec = <&rt5650 &hdmi0>; > + mediatek,platform = <&afe>; > + pinctrl-names = "default"; > + pinctrl-0 = <&aud_i2s2>; > + > + mediatek,mclk = <1>; > + codec-capture { > + sound-dai = <&rt5650 1>; > + }; > + }; > + > + hdmicon: connector { > + compatible = "hdmi-connector"; > + label = "hdmi"; > + type = "a"; > + ddc-i2c-bus = <&hdmiddc0>; > + > + port { > + hdmi_connector_in: endpoint { > + remote-endpoint = <&hdmi0_out>; > + }; > + }; > + }; > +}; > + > +&cec { > + status = "okay"; > +}; > + > +&cpu0 { > + proc-supply = <&mt6397_vpca15_reg>; > +}; > + > +&cpu1 { > + proc-supply = <&mt6397_vpca15_reg>; > +}; > + > +&cpu2 { > + proc-supply = <&da9211_vcpu_reg>; > + sram-supply = <&mt6397_vsramca7_reg>; > +}; > + > +&cpu3 { > + proc-supply = <&da9211_vcpu_reg>; > + sram-supply = <&mt6397_vsramca7_reg>; > +}; > + > +&cpu_thermal { > + sustainable-power = <4500>; /* milliwatts */ > + trips { > + threshold: trip-point@0 { > + temperature = <60000>; > + }; > + > + target: trip-point@1 { > + temperature = <65000>; > + }; > + }; > +}; > + > +&dsi0 { > + status = "okay"; > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + dsi0_out: endpoint { > + remote-endpoint = <&ps8640_in>; > + }; > + }; > + }; > +}; > + > +&dpi0 { > + status = "okay"; > +}; > + > +&hdmi0 { > + status = "okay"; > + ports { > + port@1 { > + reg = <1>; > + > + hdmi0_out: endpoint { > + remote-endpoint = <&hdmi_connector_in>; > + }; > + }; > + }; > +}; > + > +&hdmi_phy { > + status = "okay"; > + mediatek,ibias = <0xc>; > +}; > + > +&i2c0 { > + status = "okay"; > + > + rt5650: audio-codec@1a { > + compatible = "realtek,rt5650"; > + reg = <0x1a>; > + avdd-supply = <&mt6397_vgp1_reg>; > + cpvdd-supply = <&mt6397_vcama_reg>; > + interrupt-parent = <&pio>; > + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&rt5650_irq>; > + #sound-dai-cells = <1>; > + realtek,dmic1-data-pin = <2>; > + realtek,jd-mode = <2>; > + }; > + > + ps8640: edp-bridge@8 { > + compatible = "parade,ps8640"; > + reg = <0x8>; > + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; > + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&ps8640_pins>; > + vdd12-supply = <&ps8640_fixed_1v2>; > + vdd33-supply = <&mt6397_vgp2_reg>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + ps8640_in: endpoint { > + remote-endpoint = <&dsi0_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + ps8640_out: endpoint { > + remote-endpoint = <&panel_in>; > + }; > + }; > + }; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <1500000>; > + status = "okay"; > + > + da9211: da9211@68 { > + compatible = "dlg,da9211"; > + reg = <0x68>; > + > + regulators { > + da9211_vcpu_reg: BUCKA { > + regulator-name = "VBUCKA"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1310000>; > + regulator-min-microamp = <2000000>; > + regulator-max-microamp = <4400000>; > + regulator-ramp-delay = <10000>; > + regulator-always-on; > + regulator-allowed-modes = <0 1>; > + }; > + > + da9211_vgpu_reg: BUCKB { > + regulator-name = "VBUCKB"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1310000>; > + regulator-min-microamp = <2000000>; > + regulator-max-microamp = <3000000>; > + regulator-ramp-delay = <10000>; > + }; > + }; > + }; > +}; > + > +&i2c2 { > + status = "okay"; > + > + tpm: tpm@20 { > + compatible = "infineon,slb9645tt"; > + reg = <0x20>; > + powered-while-suspended; > + }; > +}; > + > +&i2c3 { > + clock-frequency = <400000>; > + status = "okay"; > + > + touchscreen: touchscreen@10 { > + compatible = "elan,ekth3500"; > + reg = <0x10>; > + interrupt-parent = <&pio>; > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > + }; > +}; > + > +&i2c4 { > + clock-frequency = <400000>; > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&trackpad_irq>; > + > + trackpad: trackpad@15 { > + compatible = "elan,ekth3000"; > + interrupt-parent = <&pio>; > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > + reg = <0x15>; > + vcc-supply = <&mt6397_vgp6_reg>; > + wakeup-source; > + }; > +}; > + > +&mipi_tx0 { > + status = "okay"; > +}; > + > +&mmc0 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc0_pins_default>; > + pinctrl-1 = <&mmc0_pins_uhs>; > + bus-width = <8>; > + max-frequency = <200000000>; > + cap-mmc-highspeed; > + mmc-hs200-1_8v; > + mmc-hs400-1_8v; > + cap-mmc-hw-reset; > + hs400-ds-delay = <0x14015>; > + mediatek,hs200-cmd-int-delay=<30>; > + mediatek,hs400-cmd-int-delay=<14>; > + mediatek,hs400-cmd-resp-sel-rising; > + vmmc-supply = <&mt6397_vemc_3v3_reg>; > + vqmmc-supply = <&mt6397_vio18_reg>; > + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; > + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; > + non-removable; > +}; > + > +&mmc1 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc1_pins_default>; > + pinctrl-1 = <&mmc1_pins_uhs>; > + bus-width = <4>; > + max-frequency = <200000000>; > + cap-sd-highspeed; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; Is this really a GPIO_ACTIVE_HIGH? I still have problems with this, I need to comment this line and add non-removable as a workaround in order to boot from the SD-card. I think that the problem is that is GPIO_ACTIVE_LOW (it works for me, but I don't have the schematics to confirm) > + vmmc-supply = <&mt6397_vmch_reg>; > + vqmmc-supply = <&mt6397_vmc_reg>; > +}; > + > +&mmc3 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc3_pins_default>; > + pinctrl-1 = <&mmc3_pins_uhs>; > + bus-width = <4>; > + max-frequency = <200000000>; > + cap-sd-highspeed; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + sdr104-clk-delay = <5>; > + keep-power-in-suspend; > + enable-sdio-wakeup; > + cap-sdio-irq; > + vmmc-supply = <&sdio_fixed_3v3>; > + vqmmc-supply = <&mt6397_vgp3_reg>; > + non-removable; > + cap-power-off-card; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + btmrvl: btmrvl@2 { > + compatible = "marvell,sd8897-bt"; > + reg = <2>; > + interrupt-parent = <&pio>; > + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; > + marvell,wakeup-pin = /bits/ 16 <0x0d>; > + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; > + }; > + > + mwifiex: mwifiex@1 { > + compatible = "marvell,sd8897"; > + reg = <1>; > + interrupt-parent = <&pio>; > + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; > + marvell,wakeup-pin = <3>; > + marvell,caldata_ed_mac = /bits/ 8 < > +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > + >; > + }; > +}; > + > +&nor_flash { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&nor_gpio1_pins>; > + bus-width = <8>; > + max-frequency = <50000000>; > + non-removable; > + flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + }; > +}; > + > +&pio { > + aud_i2s2: aud_i2s2 { > + pins1 { > + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, > + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, > + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, > + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, > + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, > + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, > + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; > + bias-pull-down; > + }; > + }; > + > + bl_fixed_pins: bl_fixed_pins { > + pins1 { > + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; > + output-low; > + }; > + }; > + > + bt_wake_pins: bt_wake_pins { > + pins1 { > + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; > + bias-pull-up; > + }; > + }; > + > + disp_pwm0_pins: disp_pwm0_pins { > + pins1 { > + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; > + output-low; > + }; > + }; > + > + gpio_keys_pins: gpio_keys_pins { > + volume_pins { > + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, > + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; > + bias-pull-up; > + }; > + > + tablet_mode_pins { > + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; > + bias-pull-up; > + }; > + }; > + > + hdmi_mux_pins: hdmi_mux_pins { > + pins1 { > + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; > + }; > + }; > + > + mmc0_pins_default: mmc0default { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > + bias-pull-up; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > + bias-pull-down; > + }; > + > + pins_rst { > + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > + bias-pull-up; > + }; > + }; > + > + mmc1_pins_default: mmc1default { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > + bias-pull-down; > + drive-strength = <MTK_DRIVE_4mA>; > + }; > + > + pins_insert { > + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; > + bias-pull-up; > + }; > + }; > + > + mmc3_pins_default: mmc3default { > + pins_dat { > + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_cmd { > + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > + bias-pull-down; > + drive-strength = <MTK_DRIVE_8mA>; > + }; > + > + pins_pdn { > + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; > + output-low; > + }; > + }; > + > + mmc0_pins_uhs: mmc0 { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_ds { > + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; > + drive-strength = <MTK_DRIVE_10mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_rst { > + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > + bias-pull-up; > + }; > + }; > + > + mmc1_pins_uhs: mmc1 { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + }; > + > + mmc3_pins_uhs: mmc3 { > + pins_dat { > + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_cmd { > + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + }; > + > + nor_gpio1_pins: nor { > + pins1 { > + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, > + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, > + <MT8173_PIN_8_EINT8__FUNC_SFIN>; > + input-enable; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up; > + }; > + > + pins2 { > + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; > + input-enable; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up; > + }; > + }; > + > + panel_fixed_pins: panel_fixed_pins { > + pins1 { > + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; > + }; > + }; > + > + ps8640_pins: ps8640_pins { > + pins1 { > + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, > + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, > + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; > + }; > + }; > + > + ps8640_fixed_pins: ps8640_fixed_pins { > + pins1 { > + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; > + }; > + }; > + > + rt5650_irq: rt5650_irq { > + pins1 { > + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; > + bias-pull-down; > + }; > + }; > + > + spi_pins_a: spi1 { > + pins1 { > + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; > + bias-pull-up; > + }; > + > + pins_spi { > + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, > + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, > + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, > + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; > + bias-disable; > + }; > + }; > + > + trackpad_irq: trackpad_irq { > + pins1 { > + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; > + input-enable; > + bias-pull-up; > + }; > + }; > + > + usb_pins: usb@0 { > + pins1 { > + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; > + output-high; > + bias-disable; > + }; > + }; > + > + wifi_wake_pins: wifi_wake_pins { > + pins1 { > + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; > + bias-pull-up; > + }; > + }; > +}; > + > +&pwm0 { > + status = "okay"; > +}; > + > +&pwrap { > + pmic: mt6397 { > + compatible = "mediatek,mt6397"; > + #address-cells = <1>; > + #size-cells = <1>; > + interrupt-parent = <&pio>; > + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + mt6397rtc: mt6397rtc { > + compatible = "mediatek,mt6397-rtc"; > + }; > + > + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { > + compatible = "mediatek,mt6397-pctl-pmic-syscfg", > + "syscon"; > + reg = <0 0x0000c000 0 0x0108>; > + }; > + > + pio6397: pinctrl@c000 { > + compatible = "mediatek,mt6397-pinctrl"; > + pins-are-numbered; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + mt6397clock: mt6397clock { > + compatible = "mediatek,mt6397-clk"; > + #clock-cells = <1>; > + }; > + > + mt6397regulator: mt6397regulator { > + compatible = "mediatek,mt6397-regulator"; > + > + mt6397_vpca15_reg: buck_vpca15 { > + regulator-compatible = "buck_vpca15"; > + regulator-name = "vpca15"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + regulator-allowed-modes = <0 1>; > + }; > + > + mt6397_vpca7_reg: buck_vpca7 { > + regulator-compatible = "buck_vpca7"; > + regulator-name = "vpca7"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <115>; > + regulator-always-on; > + }; > + > + mt6397_vsramca15_reg: buck_vsramca15 { > + regulator-compatible = "buck_vsramca15"; > + regulator-name = "vsramca15"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vsramca7_reg: buck_vsramca7 { > + regulator-compatible = "buck_vsramca7"; > + regulator-name = "vsramca7"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vcore_reg: buck_vcore { > + regulator-compatible = "buck_vcore"; > + regulator-name = "vcore"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vgpu_reg: buck_vgpu { > + regulator-compatible = "buck_vgpu"; > + regulator-name = "vgpu"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <115>; > + }; > + > + mt6397_vdrm_reg: buck_vdrm { > + regulator-compatible = "buck_vdrm"; > + regulator-name = "vdrm"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1400000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vio18_reg: buck_vio18 { > + regulator-compatible = "buck_vio18"; > + regulator-name = "vio18"; > + regulator-min-microvolt = <1620000>; > + regulator-max-microvolt = <1980000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vtcxo_reg: ldo_vtcxo { > + regulator-compatible = "ldo_vtcxo"; > + regulator-name = "vtcxo"; > + regulator-always-on; > + }; > + > + mt6397_va28_reg: ldo_va28 { > + regulator-compatible = "ldo_va28"; > + regulator-name = "va28"; > + }; > + > + mt6397_vcama_reg: ldo_vcama { > + regulator-compatible = "ldo_vcama"; > + regulator-name = "vcama"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vio28_reg: ldo_vio28 { > + regulator-compatible = "ldo_vio28"; > + regulator-name = "vio28"; > + regulator-always-on; > + }; > + > + mt6397_vusb_reg: ldo_vusb { > + regulator-compatible = "ldo_vusb"; > + regulator-name = "vusb"; > + }; > + > + mt6397_vmc_reg: ldo_vmc { > + regulator-compatible = "ldo_vmc"; > + regulator-name = "vmc"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vmch_reg: ldo_vmch { > + regulator-compatible = "ldo_vmch"; > + regulator-name = "vmch"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vemc_3v3_reg: ldo_vemc3v3 { > + regulator-compatible = "ldo_vemc3v3"; > + regulator-name = "vemc_3v3"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp1_reg: ldo_vgp1 { > + regulator-compatible = "ldo_vgp1"; > + regulator-name = "vcamd"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <240>; > + }; > + > + mt6397_vgp2_reg: ldo_vgp2 { > + regulator-compatible = "ldo_vgp2"; > + regulator-name = "vcamio"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp3_reg: ldo_vgp3 { > + regulator-compatible = "ldo_vgp3"; > + regulator-name = "vcamaf"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp4_reg: ldo_vgp4 { > + regulator-compatible = "ldo_vgp4"; > + regulator-name = "vgp4"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp5_reg: ldo_vgp5 { > + regulator-compatible = "ldo_vgp5"; > + regulator-name = "vgp5"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3000000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp6_reg: ldo_vgp6 { > + regulator-compatible = "ldo_vgp6"; > + regulator-name = "vgp6"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + regulator-always-on; > + }; > + > + mt6397_vibr_reg: ldo_vibr { > + regulator-compatible = "ldo_vibr"; > + regulator-name = "vibr"; > + regulator-min-microvolt = <1300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + }; > + }; > +}; > + > +&spi { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi_pins_a>; > + mediatek,pad-select = <1>; > + status = "okay"; > + /* clients */ > + cros_ec: ec@0 { > + compatible = "google,cros-ec-spi"; > + reg = <0x0>; > + spi-max-frequency = <12000000>; > + interrupt-parent = <&pio>; > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > + google,cros-ec-spi-msg-delay = <500>; > + > + i2c_tunnel: i2c-tunnel@0 { > + compatible = "google,cros-ec-i2c-tunnel"; > + google,remote-bus = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + battery: sbs-battery@b { > + compatible = "sbs,sbs-battery"; > + reg = <0xb>; > + sbs,i2c-retry-count = <2>; > + sbs,poll-retry-count = <1>; > + }; > + }; > + }; > +}; > + > +&thermal { > + bank0-supply = <&mt6397_vpca15_reg>; > + bank1-supply = <&da9211_vcpu_reg>; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&ssusb { > + dr_mode = "host"; > + wakeup-source; > + vusb33-supply = <&mt6397_vusb_reg>; > + status = "okay"; > +}; > + > +&usb_host { > + pinctrl-names = "default"; > + pinctrl-0 = <&usb_pins>; > + vusb33-supply = <&mt6397_vusb_reg>; > + status = "okay"; > +}; > + > +#include "../../../../arm/boot/dts/cros-ec-keyboard.dtsi" > \ No newline at end of file > ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board @ 2020-01-13 9:29 ` Enric Balletbo i Serra 0 siblings, 0 replies; 42+ messages in thread From: Enric Balletbo i Serra @ 2020-01-13 9:29 UTC (permalink / raw) To: Hsin-Yi Wang, linux-arm-kernel Cc: Mark Rutland, devicetree, Nicolas Boichat, linux-kernel, Daniel Kurtz, Doug Anderson, Rob Herring, linux-mediatek, Matthias Brugger, Matthias Kaehlcke Hi Hsin-Yi, Apart from the maintainer comments, a few more comments ... cc'ing Matthias and Doug who I know played a bit with the pwm-backlight for the uprev of the veyron devices, and you might be interested in his feedback in general. On 10/1/20 8:37, Hsin-Yi Wang wrote: > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > SoC. > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > --- > Changes in v2: > - remove downstream nodes and unused nodes > - use GPIO_ACTIVE_LOW for ps8640 gpios > - move trackpad to hana > --- > arch/arm64/boot/dts/mediatek/Makefile | 3 + > .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > 6 files changed, 1161 insertions(+) > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > index 458bbc422a94..b45a45a565a1 100644 > --- a/arch/arm64/boot/dts/mediatek/Makefile > +++ b/arch/arm64/boot/dts/mediatek/Makefile > @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > new file mode 100644 > index 000000000000..a3616bc3d859 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > @@ -0,0 +1,27 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2019 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm-hana.dtsi" > + > +/ { > + model = "Mediatek Hana rev7 board"; > + compatible = "google,hana-rev7", "mediatek,mt8173"; > +}; > + > +&cpu_thermal { > + trips { > + cpu_crit: cpu_crit@0 { > + temperature = <100000>; > + type = "critical"; > + }; > + }; > +}; > + > +&gpio_keys { > + /delete-node/tablet_mode; > + /delete-node/volume_down; > + /delete-node/volume_up; > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > new file mode 100644 > index 000000000000..8cbcc75192e3 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > @@ -0,0 +1,16 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm-hana.dtsi" > + > +/ { > + model = "Mediatek Hana rev0 board"; > + compatible = "google,hana-rev6", > + "google,hana-rev5", "google,hana-rev4", > + "google,hana-rev3", "google,hana-rev2", > + "google,hana-rev1", "google,hana-rev0", > + "google,hana", "mediatek,mt8173"; nit: Usually we try to keep all aligned > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > new file mode 100644 > index 000000000000..35e12b290947 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > @@ -0,0 +1,60 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +#include "mt8173-elm.dtsi" > + > +&i2c0 { > + clock-frequency = <200000>; > +}; > + > +&i2c3 { > + touchscreen2: touchscreen@34 { > + compatible = "melfas,mip4_ts"; > + reg = <0x34>; > + interrupt-parent = <&pio>; > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + touchscreen3: touchscreen@20 { > + compatible = "hid-over-i2c"; > + reg = <0x20>; > + hid-descr-addr = <0x0020>; > + interrupt-parent = <&pio>; > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > + }; That still looks weird to me. I don't have the touchscreen working yet so I can really comment though. > +}; > + > +&i2c4 { > + trackpad2: trackpad@2c { > + compatible = "hid-over-i2c"; > + interrupt-parent = <&pio>; > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > + reg = <0x2c>; > + hid-descr-addr = <0x0020>; > + wakeup-source; The same for trackpads, still not working for me. There is no different compatible to distinguish between the boards that have one or the other trackpad? > + }; > +}; > + > +&mmc1 { > + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; > +}; > + > +&pio { > + hdmi_mux_pins: hdmi_mux_pins { > + pins2 { > + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; > + bias-pull-up; > + output-high; > + }; > + }; > + > + mmc1_pins_default: mmc1default { > + pins_wp { > + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; > + input-enable; > + bias-pull-up; > + }; > + }; > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > new file mode 100644 > index 000000000000..e5da2355760e > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > @@ -0,0 +1,15 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm.dtsi" > + > +/ { > + model = "Mediatek Elm board"; > + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", > + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", > + "google,elm-rev2", "google,elm-rev1", > + "google,elm", "mediatek,mt8173"; nit: keep it aligned. > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > new file mode 100644 > index 000000000000..2ac738bebe04 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > @@ -0,0 +1,1040 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/gpio/gpio.h> > +#include "mt8173.dtsi" > + > +/ { > + aliases { > + serial0 = &uart0; > + serial1 = &uart1; > + serial2 = &uart2; > + serial3 = &uart3; > + }; I think this should be in mt8173.dtsi? > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0 0x40000000 0 0x80000000>; > + }; > + > + backlight_lcd: backlight_lcd { nit: Not sure if you need to change or not, but this node is usually called backlight: backlight without the _lcd. Note that this imply a userspace change but /sys/class/backlight/backlight is more aligned with other boards (I guess) when you have only one backlight. See for example: git grep backlight arch/arm64/boot/* > + compatible = "pwm-backlight"; > + pwms = <&pwm0 0 1000000>; > + brightness-levels = < > + 0 16 32 48 64 80 96 112 > + 128 144 160 176 192 208 224 240 > + 255 > + >; > + default-brightness-level = <9>; The reason you see the display too dark is because userspace sets and remembers the default value you have using the above configuration which is only 16 levels. So after removing the two above properties you should set a new brightness from userspace. AFAIK 16 levels is not enough to have fancy backlight effects on Chrome OS userspace, at least is not enough for Rockchip devices so I suppose is the same for Mediatek. You have to options here. A) Remove brightness-levels and default-brightness-level. This will end with a non-linear brightness curve for the backlight up to 4095 levels. # cat max_brightness 4095 B) Use the num-interpolated-steps and default-brightness-level properties. This will end with a linear curve brightness. Similar to what is done for veyron devices but in this case with more levels because the PWM to control the backlight is 16-bits instead of 8-bits for veyron devices. * https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/rk3288-veyron-edp.dtsi#n42 My guess is that you're interested on option B here to be coherent with other Chromebooks. > + power-supply = <&bl_fixed_reg>; > + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&disp_pwm0_pins>; > + status = "okay"; > + }; > + > + bl_fixed_reg: fixedregulator@2 { > + compatible = "regulator-fixed"; > + regulator-name = "bl_fixed"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + startup-delay-us = <1000>; > + enable-active-high; > + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&bl_fixed_pins>; > + }; > + > + chosen { > + stdout-path = &uart0; You probably want stdout-path = "serial0:115200n8"; That way you'll get serial without needing to specify the console in the kernel command line. Otherwise doesn't work because baudrate is missing. > + }; > + > + gpio_keys: gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&gpio_keys_pins>; > + > + lid { > + label = "Lid"; > + gpios = <&pio 69 GPIO_ACTIVE_LOW>; > + linux,code = <0>; /* SW_LID */ > + linux,input-type = <5>; /* EV_SW */ > + gpio-key,wakeup; > + }; > + > + power { > + label = "Power"; > + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; > + linux,code = <KEY_POWER>; > + debounce-interval = <30>; > + gpio-key,wakeup; > + }; > + > + tablet_mode { > + label = "Tablet_mode"; > + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; > + linux,code = <1>; /* SW_TABLET_MODE */ > + linux,input-type = <5>; /* EV_SW */ > + gpio-key,wakeup; > + }; > + > + volume_down { > + label = "Volume_down"; > + gpios = <&pio 123 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEDOWN>; > + }; > + > + volume_up { > + label = "Volume_up"; > + gpios = <&pio 124 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEUP>; > + }; > + }; > + > + panel: panel { > + compatible = "lg,lp120up1"; > + power-supply = <&panel_fixed_3v3>; > + ddc-i2c-bus = <&i2c0>; > + backlight = <&backlight_lcd>; > + > + port { > + panel_in: endpoint { > + remote-endpoint = <&ps8640_out>; > + }; > + }; > + }; > + > + panel_fixed_3v3: regulator@1 { > + compatible = "regulator-fixed"; > + regulator-name = "PANEL_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + enable-active-high; > + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&panel_fixed_pins>; > + }; > + > + ps8640_fixed_1v2: regulator@2 { > + compatible = "regulator-fixed"; > + regulator-name = "PS8640_1V2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-enable-ramp-delay = <2000>; > + enable-active-high; > + regulator-boot-on; > + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&ps8640_fixed_pins>; > + }; > + > + sdio_fixed_3v3: fixedregulator@0 { > + compatible = "regulator-fixed"; > + regulator-name = "3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; > + }; > + > + sound: sound { > + compatible = "mediatek,mt8173-rt5650"; > + mediatek,audio-codec = <&rt5650 &hdmi0>; > + mediatek,platform = <&afe>; > + pinctrl-names = "default"; > + pinctrl-0 = <&aud_i2s2>; > + > + mediatek,mclk = <1>; > + codec-capture { > + sound-dai = <&rt5650 1>; > + }; > + }; > + > + hdmicon: connector { > + compatible = "hdmi-connector"; > + label = "hdmi"; > + type = "a"; > + ddc-i2c-bus = <&hdmiddc0>; > + > + port { > + hdmi_connector_in: endpoint { > + remote-endpoint = <&hdmi0_out>; > + }; > + }; > + }; > +}; > + > +&cec { > + status = "okay"; > +}; > + > +&cpu0 { > + proc-supply = <&mt6397_vpca15_reg>; > +}; > + > +&cpu1 { > + proc-supply = <&mt6397_vpca15_reg>; > +}; > + > +&cpu2 { > + proc-supply = <&da9211_vcpu_reg>; > + sram-supply = <&mt6397_vsramca7_reg>; > +}; > + > +&cpu3 { > + proc-supply = <&da9211_vcpu_reg>; > + sram-supply = <&mt6397_vsramca7_reg>; > +}; > + > +&cpu_thermal { > + sustainable-power = <4500>; /* milliwatts */ > + trips { > + threshold: trip-point@0 { > + temperature = <60000>; > + }; > + > + target: trip-point@1 { > + temperature = <65000>; > + }; > + }; > +}; > + > +&dsi0 { > + status = "okay"; > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + dsi0_out: endpoint { > + remote-endpoint = <&ps8640_in>; > + }; > + }; > + }; > +}; > + > +&dpi0 { > + status = "okay"; > +}; > + > +&hdmi0 { > + status = "okay"; > + ports { > + port@1 { > + reg = <1>; > + > + hdmi0_out: endpoint { > + remote-endpoint = <&hdmi_connector_in>; > + }; > + }; > + }; > +}; > + > +&hdmi_phy { > + status = "okay"; > + mediatek,ibias = <0xc>; > +}; > + > +&i2c0 { > + status = "okay"; > + > + rt5650: audio-codec@1a { > + compatible = "realtek,rt5650"; > + reg = <0x1a>; > + avdd-supply = <&mt6397_vgp1_reg>; > + cpvdd-supply = <&mt6397_vcama_reg>; > + interrupt-parent = <&pio>; > + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&rt5650_irq>; > + #sound-dai-cells = <1>; > + realtek,dmic1-data-pin = <2>; > + realtek,jd-mode = <2>; > + }; > + > + ps8640: edp-bridge@8 { > + compatible = "parade,ps8640"; > + reg = <0x8>; > + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; > + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&ps8640_pins>; > + vdd12-supply = <&ps8640_fixed_1v2>; > + vdd33-supply = <&mt6397_vgp2_reg>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + ps8640_in: endpoint { > + remote-endpoint = <&dsi0_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + ps8640_out: endpoint { > + remote-endpoint = <&panel_in>; > + }; > + }; > + }; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <1500000>; > + status = "okay"; > + > + da9211: da9211@68 { > + compatible = "dlg,da9211"; > + reg = <0x68>; > + > + regulators { > + da9211_vcpu_reg: BUCKA { > + regulator-name = "VBUCKA"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1310000>; > + regulator-min-microamp = <2000000>; > + regulator-max-microamp = <4400000>; > + regulator-ramp-delay = <10000>; > + regulator-always-on; > + regulator-allowed-modes = <0 1>; > + }; > + > + da9211_vgpu_reg: BUCKB { > + regulator-name = "VBUCKB"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1310000>; > + regulator-min-microamp = <2000000>; > + regulator-max-microamp = <3000000>; > + regulator-ramp-delay = <10000>; > + }; > + }; > + }; > +}; > + > +&i2c2 { > + status = "okay"; > + > + tpm: tpm@20 { > + compatible = "infineon,slb9645tt"; > + reg = <0x20>; > + powered-while-suspended; > + }; > +}; > + > +&i2c3 { > + clock-frequency = <400000>; > + status = "okay"; > + > + touchscreen: touchscreen@10 { > + compatible = "elan,ekth3500"; > + reg = <0x10>; > + interrupt-parent = <&pio>; > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > + }; > +}; > + > +&i2c4 { > + clock-frequency = <400000>; > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&trackpad_irq>; > + > + trackpad: trackpad@15 { > + compatible = "elan,ekth3000"; > + interrupt-parent = <&pio>; > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > + reg = <0x15>; > + vcc-supply = <&mt6397_vgp6_reg>; > + wakeup-source; > + }; > +}; > + > +&mipi_tx0 { > + status = "okay"; > +}; > + > +&mmc0 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc0_pins_default>; > + pinctrl-1 = <&mmc0_pins_uhs>; > + bus-width = <8>; > + max-frequency = <200000000>; > + cap-mmc-highspeed; > + mmc-hs200-1_8v; > + mmc-hs400-1_8v; > + cap-mmc-hw-reset; > + hs400-ds-delay = <0x14015>; > + mediatek,hs200-cmd-int-delay=<30>; > + mediatek,hs400-cmd-int-delay=<14>; > + mediatek,hs400-cmd-resp-sel-rising; > + vmmc-supply = <&mt6397_vemc_3v3_reg>; > + vqmmc-supply = <&mt6397_vio18_reg>; > + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; > + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; > + non-removable; > +}; > + > +&mmc1 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc1_pins_default>; > + pinctrl-1 = <&mmc1_pins_uhs>; > + bus-width = <4>; > + max-frequency = <200000000>; > + cap-sd-highspeed; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; Is this really a GPIO_ACTIVE_HIGH? I still have problems with this, I need to comment this line and add non-removable as a workaround in order to boot from the SD-card. I think that the problem is that is GPIO_ACTIVE_LOW (it works for me, but I don't have the schematics to confirm) > + vmmc-supply = <&mt6397_vmch_reg>; > + vqmmc-supply = <&mt6397_vmc_reg>; > +}; > + > +&mmc3 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc3_pins_default>; > + pinctrl-1 = <&mmc3_pins_uhs>; > + bus-width = <4>; > + max-frequency = <200000000>; > + cap-sd-highspeed; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + sdr104-clk-delay = <5>; > + keep-power-in-suspend; > + enable-sdio-wakeup; > + cap-sdio-irq; > + vmmc-supply = <&sdio_fixed_3v3>; > + vqmmc-supply = <&mt6397_vgp3_reg>; > + non-removable; > + cap-power-off-card; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + btmrvl: btmrvl@2 { > + compatible = "marvell,sd8897-bt"; > + reg = <2>; > + interrupt-parent = <&pio>; > + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; > + marvell,wakeup-pin = /bits/ 16 <0x0d>; > + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; > + }; > + > + mwifiex: mwifiex@1 { > + compatible = "marvell,sd8897"; > + reg = <1>; > + interrupt-parent = <&pio>; > + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; > + marvell,wakeup-pin = <3>; > + marvell,caldata_ed_mac = /bits/ 8 < > +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > + >; > + }; > +}; > + > +&nor_flash { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&nor_gpio1_pins>; > + bus-width = <8>; > + max-frequency = <50000000>; > + non-removable; > + flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + }; > +}; > + > +&pio { > + aud_i2s2: aud_i2s2 { > + pins1 { > + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, > + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, > + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, > + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, > + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, > + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, > + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; > + bias-pull-down; > + }; > + }; > + > + bl_fixed_pins: bl_fixed_pins { > + pins1 { > + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; > + output-low; > + }; > + }; > + > + bt_wake_pins: bt_wake_pins { > + pins1 { > + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; > + bias-pull-up; > + }; > + }; > + > + disp_pwm0_pins: disp_pwm0_pins { > + pins1 { > + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; > + output-low; > + }; > + }; > + > + gpio_keys_pins: gpio_keys_pins { > + volume_pins { > + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, > + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; > + bias-pull-up; > + }; > + > + tablet_mode_pins { > + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; > + bias-pull-up; > + }; > + }; > + > + hdmi_mux_pins: hdmi_mux_pins { > + pins1 { > + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; > + }; > + }; > + > + mmc0_pins_default: mmc0default { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > + bias-pull-up; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > + bias-pull-down; > + }; > + > + pins_rst { > + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > + bias-pull-up; > + }; > + }; > + > + mmc1_pins_default: mmc1default { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > + bias-pull-down; > + drive-strength = <MTK_DRIVE_4mA>; > + }; > + > + pins_insert { > + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; > + bias-pull-up; > + }; > + }; > + > + mmc3_pins_default: mmc3default { > + pins_dat { > + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_cmd { > + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > + bias-pull-down; > + drive-strength = <MTK_DRIVE_8mA>; > + }; > + > + pins_pdn { > + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; > + output-low; > + }; > + }; > + > + mmc0_pins_uhs: mmc0 { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_ds { > + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; > + drive-strength = <MTK_DRIVE_10mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_rst { > + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > + bias-pull-up; > + }; > + }; > + > + mmc1_pins_uhs: mmc1 { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + }; > + > + mmc3_pins_uhs: mmc3 { > + pins_dat { > + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_cmd { > + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + }; > + > + nor_gpio1_pins: nor { > + pins1 { > + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, > + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, > + <MT8173_PIN_8_EINT8__FUNC_SFIN>; > + input-enable; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up; > + }; > + > + pins2 { > + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; > + input-enable; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up; > + }; > + }; > + > + panel_fixed_pins: panel_fixed_pins { > + pins1 { > + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; > + }; > + }; > + > + ps8640_pins: ps8640_pins { > + pins1 { > + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, > + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, > + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; > + }; > + }; > + > + ps8640_fixed_pins: ps8640_fixed_pins { > + pins1 { > + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; > + }; > + }; > + > + rt5650_irq: rt5650_irq { > + pins1 { > + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; > + bias-pull-down; > + }; > + }; > + > + spi_pins_a: spi1 { > + pins1 { > + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; > + bias-pull-up; > + }; > + > + pins_spi { > + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, > + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, > + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, > + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; > + bias-disable; > + }; > + }; > + > + trackpad_irq: trackpad_irq { > + pins1 { > + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; > + input-enable; > + bias-pull-up; > + }; > + }; > + > + usb_pins: usb@0 { > + pins1 { > + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; > + output-high; > + bias-disable; > + }; > + }; > + > + wifi_wake_pins: wifi_wake_pins { > + pins1 { > + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; > + bias-pull-up; > + }; > + }; > +}; > + > +&pwm0 { > + status = "okay"; > +}; > + > +&pwrap { > + pmic: mt6397 { > + compatible = "mediatek,mt6397"; > + #address-cells = <1>; > + #size-cells = <1>; > + interrupt-parent = <&pio>; > + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + mt6397rtc: mt6397rtc { > + compatible = "mediatek,mt6397-rtc"; > + }; > + > + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { > + compatible = "mediatek,mt6397-pctl-pmic-syscfg", > + "syscon"; > + reg = <0 0x0000c000 0 0x0108>; > + }; > + > + pio6397: pinctrl@c000 { > + compatible = "mediatek,mt6397-pinctrl"; > + pins-are-numbered; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + mt6397clock: mt6397clock { > + compatible = "mediatek,mt6397-clk"; > + #clock-cells = <1>; > + }; > + > + mt6397regulator: mt6397regulator { > + compatible = "mediatek,mt6397-regulator"; > + > + mt6397_vpca15_reg: buck_vpca15 { > + regulator-compatible = "buck_vpca15"; > + regulator-name = "vpca15"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + regulator-allowed-modes = <0 1>; > + }; > + > + mt6397_vpca7_reg: buck_vpca7 { > + regulator-compatible = "buck_vpca7"; > + regulator-name = "vpca7"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <115>; > + regulator-always-on; > + }; > + > + mt6397_vsramca15_reg: buck_vsramca15 { > + regulator-compatible = "buck_vsramca15"; > + regulator-name = "vsramca15"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vsramca7_reg: buck_vsramca7 { > + regulator-compatible = "buck_vsramca7"; > + regulator-name = "vsramca7"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vcore_reg: buck_vcore { > + regulator-compatible = "buck_vcore"; > + regulator-name = "vcore"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vgpu_reg: buck_vgpu { > + regulator-compatible = "buck_vgpu"; > + regulator-name = "vgpu"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <115>; > + }; > + > + mt6397_vdrm_reg: buck_vdrm { > + regulator-compatible = "buck_vdrm"; > + regulator-name = "vdrm"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1400000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vio18_reg: buck_vio18 { > + regulator-compatible = "buck_vio18"; > + regulator-name = "vio18"; > + regulator-min-microvolt = <1620000>; > + regulator-max-microvolt = <1980000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vtcxo_reg: ldo_vtcxo { > + regulator-compatible = "ldo_vtcxo"; > + regulator-name = "vtcxo"; > + regulator-always-on; > + }; > + > + mt6397_va28_reg: ldo_va28 { > + regulator-compatible = "ldo_va28"; > + regulator-name = "va28"; > + }; > + > + mt6397_vcama_reg: ldo_vcama { > + regulator-compatible = "ldo_vcama"; > + regulator-name = "vcama"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vio28_reg: ldo_vio28 { > + regulator-compatible = "ldo_vio28"; > + regulator-name = "vio28"; > + regulator-always-on; > + }; > + > + mt6397_vusb_reg: ldo_vusb { > + regulator-compatible = "ldo_vusb"; > + regulator-name = "vusb"; > + }; > + > + mt6397_vmc_reg: ldo_vmc { > + regulator-compatible = "ldo_vmc"; > + regulator-name = "vmc"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vmch_reg: ldo_vmch { > + regulator-compatible = "ldo_vmch"; > + regulator-name = "vmch"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vemc_3v3_reg: ldo_vemc3v3 { > + regulator-compatible = "ldo_vemc3v3"; > + regulator-name = "vemc_3v3"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp1_reg: ldo_vgp1 { > + regulator-compatible = "ldo_vgp1"; > + regulator-name = "vcamd"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <240>; > + }; > + > + mt6397_vgp2_reg: ldo_vgp2 { > + regulator-compatible = "ldo_vgp2"; > + regulator-name = "vcamio"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp3_reg: ldo_vgp3 { > + regulator-compatible = "ldo_vgp3"; > + regulator-name = "vcamaf"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp4_reg: ldo_vgp4 { > + regulator-compatible = "ldo_vgp4"; > + regulator-name = "vgp4"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp5_reg: ldo_vgp5 { > + regulator-compatible = "ldo_vgp5"; > + regulator-name = "vgp5"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3000000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp6_reg: ldo_vgp6 { > + regulator-compatible = "ldo_vgp6"; > + regulator-name = "vgp6"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + regulator-always-on; > + }; > + > + mt6397_vibr_reg: ldo_vibr { > + regulator-compatible = "ldo_vibr"; > + regulator-name = "vibr"; > + regulator-min-microvolt = <1300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + }; > + }; > +}; > + > +&spi { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi_pins_a>; > + mediatek,pad-select = <1>; > + status = "okay"; > + /* clients */ > + cros_ec: ec@0 { > + compatible = "google,cros-ec-spi"; > + reg = <0x0>; > + spi-max-frequency = <12000000>; > + interrupt-parent = <&pio>; > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > + google,cros-ec-spi-msg-delay = <500>; > + > + i2c_tunnel: i2c-tunnel@0 { > + compatible = "google,cros-ec-i2c-tunnel"; > + google,remote-bus = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + battery: sbs-battery@b { > + compatible = "sbs,sbs-battery"; > + reg = <0xb>; > + sbs,i2c-retry-count = <2>; > + sbs,poll-retry-count = <1>; > + }; > + }; > + }; > +}; > + > +&thermal { > + bank0-supply = <&mt6397_vpca15_reg>; > + bank1-supply = <&da9211_vcpu_reg>; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&ssusb { > + dr_mode = "host"; > + wakeup-source; > + vusb33-supply = <&mt6397_vusb_reg>; > + status = "okay"; > +}; > + > +&usb_host { > + pinctrl-names = "default"; > + pinctrl-0 = <&usb_pins>; > + vusb33-supply = <&mt6397_vusb_reg>; > + status = "okay"; > +}; > + > +#include "../../../../arm/boot/dts/cros-ec-keyboard.dtsi" > \ No newline at end of file > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board @ 2020-01-13 9:29 ` Enric Balletbo i Serra 0 siblings, 0 replies; 42+ messages in thread From: Enric Balletbo i Serra @ 2020-01-13 9:29 UTC (permalink / raw) To: Hsin-Yi Wang, linux-arm-kernel Cc: Mark Rutland, devicetree, Nicolas Boichat, linux-kernel, Doug Anderson, Rob Herring, linux-mediatek, Matthias Brugger, Matthias Kaehlcke Hi Hsin-Yi, Apart from the maintainer comments, a few more comments ... cc'ing Matthias and Doug who I know played a bit with the pwm-backlight for the uprev of the veyron devices, and you might be interested in his feedback in general. On 10/1/20 8:37, Hsin-Yi Wang wrote: > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > SoC. > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > --- > Changes in v2: > - remove downstream nodes and unused nodes > - use GPIO_ACTIVE_LOW for ps8640 gpios > - move trackpad to hana > --- > arch/arm64/boot/dts/mediatek/Makefile | 3 + > .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > 6 files changed, 1161 insertions(+) > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > index 458bbc422a94..b45a45a565a1 100644 > --- a/arch/arm64/boot/dts/mediatek/Makefile > +++ b/arch/arm64/boot/dts/mediatek/Makefile > @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > new file mode 100644 > index 000000000000..a3616bc3d859 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > @@ -0,0 +1,27 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2019 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm-hana.dtsi" > + > +/ { > + model = "Mediatek Hana rev7 board"; > + compatible = "google,hana-rev7", "mediatek,mt8173"; > +}; > + > +&cpu_thermal { > + trips { > + cpu_crit: cpu_crit@0 { > + temperature = <100000>; > + type = "critical"; > + }; > + }; > +}; > + > +&gpio_keys { > + /delete-node/tablet_mode; > + /delete-node/volume_down; > + /delete-node/volume_up; > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > new file mode 100644 > index 000000000000..8cbcc75192e3 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > @@ -0,0 +1,16 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm-hana.dtsi" > + > +/ { > + model = "Mediatek Hana rev0 board"; > + compatible = "google,hana-rev6", > + "google,hana-rev5", "google,hana-rev4", > + "google,hana-rev3", "google,hana-rev2", > + "google,hana-rev1", "google,hana-rev0", > + "google,hana", "mediatek,mt8173"; nit: Usually we try to keep all aligned > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > new file mode 100644 > index 000000000000..35e12b290947 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > @@ -0,0 +1,60 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +#include "mt8173-elm.dtsi" > + > +&i2c0 { > + clock-frequency = <200000>; > +}; > + > +&i2c3 { > + touchscreen2: touchscreen@34 { > + compatible = "melfas,mip4_ts"; > + reg = <0x34>; > + interrupt-parent = <&pio>; > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + touchscreen3: touchscreen@20 { > + compatible = "hid-over-i2c"; > + reg = <0x20>; > + hid-descr-addr = <0x0020>; > + interrupt-parent = <&pio>; > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > + }; That still looks weird to me. I don't have the touchscreen working yet so I can really comment though. > +}; > + > +&i2c4 { > + trackpad2: trackpad@2c { > + compatible = "hid-over-i2c"; > + interrupt-parent = <&pio>; > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > + reg = <0x2c>; > + hid-descr-addr = <0x0020>; > + wakeup-source; The same for trackpads, still not working for me. There is no different compatible to distinguish between the boards that have one or the other trackpad? > + }; > +}; > + > +&mmc1 { > + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; > +}; > + > +&pio { > + hdmi_mux_pins: hdmi_mux_pins { > + pins2 { > + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>; > + bias-pull-up; > + output-high; > + }; > + }; > + > + mmc1_pins_default: mmc1default { > + pins_wp { > + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>; > + input-enable; > + bias-pull-up; > + }; > + }; > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > new file mode 100644 > index 000000000000..e5da2355760e > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > @@ -0,0 +1,15 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +/dts-v1/; > +#include "mt8173-elm.dtsi" > + > +/ { > + model = "Mediatek Elm board"; > + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", > + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", > + "google,elm-rev2", "google,elm-rev1", > + "google,elm", "mediatek,mt8173"; nit: keep it aligned. > +}; > \ No newline at end of file > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > new file mode 100644 > index 000000000000..2ac738bebe04 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > @@ -0,0 +1,1040 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright 2016 MediaTek Inc. > + */ > + > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/gpio/gpio.h> > +#include "mt8173.dtsi" > + > +/ { > + aliases { > + serial0 = &uart0; > + serial1 = &uart1; > + serial2 = &uart2; > + serial3 = &uart3; > + }; I think this should be in mt8173.dtsi? > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0 0x40000000 0 0x80000000>; > + }; > + > + backlight_lcd: backlight_lcd { nit: Not sure if you need to change or not, but this node is usually called backlight: backlight without the _lcd. Note that this imply a userspace change but /sys/class/backlight/backlight is more aligned with other boards (I guess) when you have only one backlight. See for example: git grep backlight arch/arm64/boot/* > + compatible = "pwm-backlight"; > + pwms = <&pwm0 0 1000000>; > + brightness-levels = < > + 0 16 32 48 64 80 96 112 > + 128 144 160 176 192 208 224 240 > + 255 > + >; > + default-brightness-level = <9>; The reason you see the display too dark is because userspace sets and remembers the default value you have using the above configuration which is only 16 levels. So after removing the two above properties you should set a new brightness from userspace. AFAIK 16 levels is not enough to have fancy backlight effects on Chrome OS userspace, at least is not enough for Rockchip devices so I suppose is the same for Mediatek. You have to options here. A) Remove brightness-levels and default-brightness-level. This will end with a non-linear brightness curve for the backlight up to 4095 levels. # cat max_brightness 4095 B) Use the num-interpolated-steps and default-brightness-level properties. This will end with a linear curve brightness. Similar to what is done for veyron devices but in this case with more levels because the PWM to control the backlight is 16-bits instead of 8-bits for veyron devices. * https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/rk3288-veyron-edp.dtsi#n42 My guess is that you're interested on option B here to be coherent with other Chromebooks. > + power-supply = <&bl_fixed_reg>; > + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&disp_pwm0_pins>; > + status = "okay"; > + }; > + > + bl_fixed_reg: fixedregulator@2 { > + compatible = "regulator-fixed"; > + regulator-name = "bl_fixed"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + startup-delay-us = <1000>; > + enable-active-high; > + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&bl_fixed_pins>; > + }; > + > + chosen { > + stdout-path = &uart0; You probably want stdout-path = "serial0:115200n8"; That way you'll get serial without needing to specify the console in the kernel command line. Otherwise doesn't work because baudrate is missing. > + }; > + > + gpio_keys: gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&gpio_keys_pins>; > + > + lid { > + label = "Lid"; > + gpios = <&pio 69 GPIO_ACTIVE_LOW>; > + linux,code = <0>; /* SW_LID */ > + linux,input-type = <5>; /* EV_SW */ > + gpio-key,wakeup; > + }; > + > + power { > + label = "Power"; > + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; > + linux,code = <KEY_POWER>; > + debounce-interval = <30>; > + gpio-key,wakeup; > + }; > + > + tablet_mode { > + label = "Tablet_mode"; > + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; > + linux,code = <1>; /* SW_TABLET_MODE */ > + linux,input-type = <5>; /* EV_SW */ > + gpio-key,wakeup; > + }; > + > + volume_down { > + label = "Volume_down"; > + gpios = <&pio 123 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEDOWN>; > + }; > + > + volume_up { > + label = "Volume_up"; > + gpios = <&pio 124 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEUP>; > + }; > + }; > + > + panel: panel { > + compatible = "lg,lp120up1"; > + power-supply = <&panel_fixed_3v3>; > + ddc-i2c-bus = <&i2c0>; > + backlight = <&backlight_lcd>; > + > + port { > + panel_in: endpoint { > + remote-endpoint = <&ps8640_out>; > + }; > + }; > + }; > + > + panel_fixed_3v3: regulator@1 { > + compatible = "regulator-fixed"; > + regulator-name = "PANEL_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + enable-active-high; > + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&panel_fixed_pins>; > + }; > + > + ps8640_fixed_1v2: regulator@2 { > + compatible = "regulator-fixed"; > + regulator-name = "PS8640_1V2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-enable-ramp-delay = <2000>; > + enable-active-high; > + regulator-boot-on; > + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&ps8640_fixed_pins>; > + }; > + > + sdio_fixed_3v3: fixedregulator@0 { > + compatible = "regulator-fixed"; > + regulator-name = "3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; > + }; > + > + sound: sound { > + compatible = "mediatek,mt8173-rt5650"; > + mediatek,audio-codec = <&rt5650 &hdmi0>; > + mediatek,platform = <&afe>; > + pinctrl-names = "default"; > + pinctrl-0 = <&aud_i2s2>; > + > + mediatek,mclk = <1>; > + codec-capture { > + sound-dai = <&rt5650 1>; > + }; > + }; > + > + hdmicon: connector { > + compatible = "hdmi-connector"; > + label = "hdmi"; > + type = "a"; > + ddc-i2c-bus = <&hdmiddc0>; > + > + port { > + hdmi_connector_in: endpoint { > + remote-endpoint = <&hdmi0_out>; > + }; > + }; > + }; > +}; > + > +&cec { > + status = "okay"; > +}; > + > +&cpu0 { > + proc-supply = <&mt6397_vpca15_reg>; > +}; > + > +&cpu1 { > + proc-supply = <&mt6397_vpca15_reg>; > +}; > + > +&cpu2 { > + proc-supply = <&da9211_vcpu_reg>; > + sram-supply = <&mt6397_vsramca7_reg>; > +}; > + > +&cpu3 { > + proc-supply = <&da9211_vcpu_reg>; > + sram-supply = <&mt6397_vsramca7_reg>; > +}; > + > +&cpu_thermal { > + sustainable-power = <4500>; /* milliwatts */ > + trips { > + threshold: trip-point@0 { > + temperature = <60000>; > + }; > + > + target: trip-point@1 { > + temperature = <65000>; > + }; > + }; > +}; > + > +&dsi0 { > + status = "okay"; > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + dsi0_out: endpoint { > + remote-endpoint = <&ps8640_in>; > + }; > + }; > + }; > +}; > + > +&dpi0 { > + status = "okay"; > +}; > + > +&hdmi0 { > + status = "okay"; > + ports { > + port@1 { > + reg = <1>; > + > + hdmi0_out: endpoint { > + remote-endpoint = <&hdmi_connector_in>; > + }; > + }; > + }; > +}; > + > +&hdmi_phy { > + status = "okay"; > + mediatek,ibias = <0xc>; > +}; > + > +&i2c0 { > + status = "okay"; > + > + rt5650: audio-codec@1a { > + compatible = "realtek,rt5650"; > + reg = <0x1a>; > + avdd-supply = <&mt6397_vgp1_reg>; > + cpvdd-supply = <&mt6397_vcama_reg>; > + interrupt-parent = <&pio>; > + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&rt5650_irq>; > + #sound-dai-cells = <1>; > + realtek,dmic1-data-pin = <2>; > + realtek,jd-mode = <2>; > + }; > + > + ps8640: edp-bridge@8 { > + compatible = "parade,ps8640"; > + reg = <0x8>; > + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; > + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&ps8640_pins>; > + vdd12-supply = <&ps8640_fixed_1v2>; > + vdd33-supply = <&mt6397_vgp2_reg>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + ps8640_in: endpoint { > + remote-endpoint = <&dsi0_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + ps8640_out: endpoint { > + remote-endpoint = <&panel_in>; > + }; > + }; > + }; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <1500000>; > + status = "okay"; > + > + da9211: da9211@68 { > + compatible = "dlg,da9211"; > + reg = <0x68>; > + > + regulators { > + da9211_vcpu_reg: BUCKA { > + regulator-name = "VBUCKA"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1310000>; > + regulator-min-microamp = <2000000>; > + regulator-max-microamp = <4400000>; > + regulator-ramp-delay = <10000>; > + regulator-always-on; > + regulator-allowed-modes = <0 1>; > + }; > + > + da9211_vgpu_reg: BUCKB { > + regulator-name = "VBUCKB"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1310000>; > + regulator-min-microamp = <2000000>; > + regulator-max-microamp = <3000000>; > + regulator-ramp-delay = <10000>; > + }; > + }; > + }; > +}; > + > +&i2c2 { > + status = "okay"; > + > + tpm: tpm@20 { > + compatible = "infineon,slb9645tt"; > + reg = <0x20>; > + powered-while-suspended; > + }; > +}; > + > +&i2c3 { > + clock-frequency = <400000>; > + status = "okay"; > + > + touchscreen: touchscreen@10 { > + compatible = "elan,ekth3500"; > + reg = <0x10>; > + interrupt-parent = <&pio>; > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > + }; > +}; > + > +&i2c4 { > + clock-frequency = <400000>; > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&trackpad_irq>; > + > + trackpad: trackpad@15 { > + compatible = "elan,ekth3000"; > + interrupt-parent = <&pio>; > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > + reg = <0x15>; > + vcc-supply = <&mt6397_vgp6_reg>; > + wakeup-source; > + }; > +}; > + > +&mipi_tx0 { > + status = "okay"; > +}; > + > +&mmc0 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc0_pins_default>; > + pinctrl-1 = <&mmc0_pins_uhs>; > + bus-width = <8>; > + max-frequency = <200000000>; > + cap-mmc-highspeed; > + mmc-hs200-1_8v; > + mmc-hs400-1_8v; > + cap-mmc-hw-reset; > + hs400-ds-delay = <0x14015>; > + mediatek,hs200-cmd-int-delay=<30>; > + mediatek,hs400-cmd-int-delay=<14>; > + mediatek,hs400-cmd-resp-sel-rising; > + vmmc-supply = <&mt6397_vemc_3v3_reg>; > + vqmmc-supply = <&mt6397_vio18_reg>; > + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; > + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; > + non-removable; > +}; > + > +&mmc1 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc1_pins_default>; > + pinctrl-1 = <&mmc1_pins_uhs>; > + bus-width = <4>; > + max-frequency = <200000000>; > + cap-sd-highspeed; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; Is this really a GPIO_ACTIVE_HIGH? I still have problems with this, I need to comment this line and add non-removable as a workaround in order to boot from the SD-card. I think that the problem is that is GPIO_ACTIVE_LOW (it works for me, but I don't have the schematics to confirm) > + vmmc-supply = <&mt6397_vmch_reg>; > + vqmmc-supply = <&mt6397_vmc_reg>; > +}; > + > +&mmc3 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc3_pins_default>; > + pinctrl-1 = <&mmc3_pins_uhs>; > + bus-width = <4>; > + max-frequency = <200000000>; > + cap-sd-highspeed; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + sdr104-clk-delay = <5>; > + keep-power-in-suspend; > + enable-sdio-wakeup; > + cap-sdio-irq; > + vmmc-supply = <&sdio_fixed_3v3>; > + vqmmc-supply = <&mt6397_vgp3_reg>; > + non-removable; > + cap-power-off-card; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + btmrvl: btmrvl@2 { > + compatible = "marvell,sd8897-bt"; > + reg = <2>; > + interrupt-parent = <&pio>; > + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; > + marvell,wakeup-pin = /bits/ 16 <0x0d>; > + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; > + }; > + > + mwifiex: mwifiex@1 { > + compatible = "marvell,sd8897"; > + reg = <1>; > + interrupt-parent = <&pio>; > + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; > + marvell,wakeup-pin = <3>; > + marvell,caldata_ed_mac = /bits/ 8 < > +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > + >; > + }; > +}; > + > +&nor_flash { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&nor_gpio1_pins>; > + bus-width = <8>; > + max-frequency = <50000000>; > + non-removable; > + flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + }; > +}; > + > +&pio { > + aud_i2s2: aud_i2s2 { > + pins1 { > + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>, > + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>, > + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>, > + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>, > + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>, > + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>, > + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>; > + bias-pull-down; > + }; > + }; > + > + bl_fixed_pins: bl_fixed_pins { > + pins1 { > + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>; > + output-low; > + }; > + }; > + > + bt_wake_pins: bt_wake_pins { > + pins1 { > + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>; > + bias-pull-up; > + }; > + }; > + > + disp_pwm0_pins: disp_pwm0_pins { > + pins1 { > + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>; > + output-low; > + }; > + }; > + > + gpio_keys_pins: gpio_keys_pins { > + volume_pins { > + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>, > + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>; > + bias-pull-up; > + }; > + > + tablet_mode_pins { > + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>; > + bias-pull-up; > + }; > + }; > + > + hdmi_mux_pins: hdmi_mux_pins { > + pins1 { > + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>; > + }; > + }; > + > + mmc0_pins_default: mmc0default { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > + bias-pull-up; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > + bias-pull-down; > + }; > + > + pins_rst { > + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > + bias-pull-up; > + }; > + }; > + > + mmc1_pins_default: mmc1default { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > + bias-pull-down; > + drive-strength = <MTK_DRIVE_4mA>; > + }; > + > + pins_insert { > + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>; > + bias-pull-up; > + }; > + }; > + > + mmc3_pins_default: mmc3default { > + pins_dat { > + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_cmd { > + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > + bias-pull-down; > + drive-strength = <MTK_DRIVE_8mA>; > + }; > + > + pins_pdn { > + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>; > + output-low; > + }; > + }; > + > + mmc0_pins_uhs: mmc0 { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>, > + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>, > + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>, > + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>, > + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>, > + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>, > + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>, > + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>, > + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_ds { > + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>; > + drive-strength = <MTK_DRIVE_10mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_rst { > + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>; > + bias-pull-up; > + }; > + }; > + > + mmc1_pins_uhs: mmc1 { > + pins_cmd_dat { > + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>, > + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>, > + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>, > + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>, > + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + }; > + > + mmc3_pins_uhs: mmc3 { > + pins_dat { > + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>, > + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>, > + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>, > + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_cmd { > + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + }; > + > + nor_gpio1_pins: nor { > + pins1 { > + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>, > + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>, > + <MT8173_PIN_8_EINT8__FUNC_SFIN>; > + input-enable; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up; > + }; > + > + pins2 { > + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up; > + }; > + > + pins_clk { > + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>; > + input-enable; > + drive-strength = <MTK_DRIVE_4mA>; > + bias-pull-up; > + }; > + }; > + > + panel_fixed_pins: panel_fixed_pins { > + pins1 { > + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>; > + }; > + }; > + > + ps8640_pins: ps8640_pins { > + pins1 { > + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>, > + <MT8173_PIN_115_URTS0__FUNC_GPIO115>, > + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>; > + }; > + }; > + > + ps8640_fixed_pins: ps8640_fixed_pins { > + pins1 { > + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>; > + }; > + }; > + > + rt5650_irq: rt5650_irq { > + pins1 { > + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>; > + bias-pull-down; > + }; > + }; > + > + spi_pins_a: spi1 { > + pins1 { > + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>; > + bias-pull-up; > + }; > + > + pins_spi { > + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>, > + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>, > + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>, > + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>; > + bias-disable; > + }; > + }; > + > + trackpad_irq: trackpad_irq { > + pins1 { > + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>; > + input-enable; > + bias-pull-up; > + }; > + }; > + > + usb_pins: usb@0 { > + pins1 { > + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>; > + output-high; > + bias-disable; > + }; > + }; > + > + wifi_wake_pins: wifi_wake_pins { > + pins1 { > + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>; > + bias-pull-up; > + }; > + }; > +}; > + > +&pwm0 { > + status = "okay"; > +}; > + > +&pwrap { > + pmic: mt6397 { > + compatible = "mediatek,mt6397"; > + #address-cells = <1>; > + #size-cells = <1>; > + interrupt-parent = <&pio>; > + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + mt6397rtc: mt6397rtc { > + compatible = "mediatek,mt6397-rtc"; > + }; > + > + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { > + compatible = "mediatek,mt6397-pctl-pmic-syscfg", > + "syscon"; > + reg = <0 0x0000c000 0 0x0108>; > + }; > + > + pio6397: pinctrl@c000 { > + compatible = "mediatek,mt6397-pinctrl"; > + pins-are-numbered; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + mt6397clock: mt6397clock { > + compatible = "mediatek,mt6397-clk"; > + #clock-cells = <1>; > + }; > + > + mt6397regulator: mt6397regulator { > + compatible = "mediatek,mt6397-regulator"; > + > + mt6397_vpca15_reg: buck_vpca15 { > + regulator-compatible = "buck_vpca15"; > + regulator-name = "vpca15"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + regulator-allowed-modes = <0 1>; > + }; > + > + mt6397_vpca7_reg: buck_vpca7 { > + regulator-compatible = "buck_vpca7"; > + regulator-name = "vpca7"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <115>; > + regulator-always-on; > + }; > + > + mt6397_vsramca15_reg: buck_vsramca15 { > + regulator-compatible = "buck_vsramca15"; > + regulator-name = "vsramca15"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vsramca7_reg: buck_vsramca7 { > + regulator-compatible = "buck_vsramca7"; > + regulator-name = "vsramca7"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vcore_reg: buck_vcore { > + regulator-compatible = "buck_vcore"; > + regulator-name = "vcore"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vgpu_reg: buck_vgpu { > + regulator-compatible = "buck_vgpu"; > + regulator-name = "vgpu"; > + regulator-min-microvolt = < 700000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <12500>; > + regulator-enable-ramp-delay = <115>; > + }; > + > + mt6397_vdrm_reg: buck_vdrm { > + regulator-compatible = "buck_vdrm"; > + regulator-name = "vdrm"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1400000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vio18_reg: buck_vio18 { > + regulator-compatible = "buck_vio18"; > + regulator-name = "vio18"; > + regulator-min-microvolt = <1620000>; > + regulator-max-microvolt = <1980000>; > + regulator-ramp-delay = <12500>; > + regulator-always-on; > + }; > + > + mt6397_vtcxo_reg: ldo_vtcxo { > + regulator-compatible = "ldo_vtcxo"; > + regulator-name = "vtcxo"; > + regulator-always-on; > + }; > + > + mt6397_va28_reg: ldo_va28 { > + regulator-compatible = "ldo_va28"; > + regulator-name = "va28"; > + }; > + > + mt6397_vcama_reg: ldo_vcama { > + regulator-compatible = "ldo_vcama"; > + regulator-name = "vcama"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vio28_reg: ldo_vio28 { > + regulator-compatible = "ldo_vio28"; > + regulator-name = "vio28"; > + regulator-always-on; > + }; > + > + mt6397_vusb_reg: ldo_vusb { > + regulator-compatible = "ldo_vusb"; > + regulator-name = "vusb"; > + }; > + > + mt6397_vmc_reg: ldo_vmc { > + regulator-compatible = "ldo_vmc"; > + regulator-name = "vmc"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vmch_reg: ldo_vmch { > + regulator-compatible = "ldo_vmch"; > + regulator-name = "vmch"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vemc_3v3_reg: ldo_vemc3v3 { > + regulator-compatible = "ldo_vemc3v3"; > + regulator-name = "vemc_3v3"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp1_reg: ldo_vgp1 { > + regulator-compatible = "ldo_vgp1"; > + regulator-name = "vcamd"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <240>; > + }; > + > + mt6397_vgp2_reg: ldo_vgp2 { > + regulator-compatible = "ldo_vgp2"; > + regulator-name = "vcamio"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp3_reg: ldo_vgp3 { > + regulator-compatible = "ldo_vgp3"; > + regulator-name = "vcamaf"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp4_reg: ldo_vgp4 { > + regulator-compatible = "ldo_vgp4"; > + regulator-name = "vgp4"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp5_reg: ldo_vgp5 { > + regulator-compatible = "ldo_vgp5"; > + regulator-name = "vgp5"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3000000>; > + regulator-enable-ramp-delay = <218>; > + }; > + > + mt6397_vgp6_reg: ldo_vgp6 { > + regulator-compatible = "ldo_vgp6"; > + regulator-name = "vgp6"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + regulator-always-on; > + }; > + > + mt6397_vibr_reg: ldo_vibr { > + regulator-compatible = "ldo_vibr"; > + regulator-name = "vibr"; > + regulator-min-microvolt = <1300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <218>; > + }; > + }; > + }; > +}; > + > +&spi { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi_pins_a>; > + mediatek,pad-select = <1>; > + status = "okay"; > + /* clients */ > + cros_ec: ec@0 { > + compatible = "google,cros-ec-spi"; > + reg = <0x0>; > + spi-max-frequency = <12000000>; > + interrupt-parent = <&pio>; > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > + google,cros-ec-spi-msg-delay = <500>; > + > + i2c_tunnel: i2c-tunnel@0 { > + compatible = "google,cros-ec-i2c-tunnel"; > + google,remote-bus = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + battery: sbs-battery@b { > + compatible = "sbs,sbs-battery"; > + reg = <0xb>; > + sbs,i2c-retry-count = <2>; > + sbs,poll-retry-count = <1>; > + }; > + }; > + }; > +}; > + > +&thermal { > + bank0-supply = <&mt6397_vpca15_reg>; > + bank1-supply = <&da9211_vcpu_reg>; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&ssusb { > + dr_mode = "host"; > + wakeup-source; > + vusb33-supply = <&mt6397_vusb_reg>; > + status = "okay"; > +}; > + > +&usb_host { > + pinctrl-names = "default"; > + pinctrl-0 = <&usb_pins>; > + vusb33-supply = <&mt6397_vusb_reg>; > + status = "okay"; > +}; > + > +#include "../../../../arm/boot/dts/cros-ec-keyboard.dtsi" > \ No newline at end of file > _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board 2020-01-13 9:29 ` Enric Balletbo i Serra (?) @ 2020-01-13 18:18 ` Matthias Kaehlcke -1 siblings, 0 replies; 42+ messages in thread From: Matthias Kaehlcke @ 2020-01-13 18:18 UTC (permalink / raw) To: Enric Balletbo i Serra Cc: Hsin-Yi Wang, linux-arm-kernel, Rob Herring, Mark Rutland, Matthias Brugger, devicetree, linux-kernel, linux-mediatek, Nicolas Boichat, Daniel Kurtz, Doug Anderson Hi, On Mon, Jan 13, 2020 at 10:29:51AM +0100, Enric Balletbo i Serra wrote: > Hi Hsin-Yi, > > Apart from the maintainer comments, a few more comments ... > > cc'ing Matthias and Doug who I know played a bit with the pwm-backlight for the > uprev of the veyron devices, and you might be interested in his feedback in general. > > On 10/1/20 8:37, Hsin-Yi Wang wrote: > > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > > SoC. > > > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > > --- > > Changes in v2: > > - remove downstream nodes and unused nodes > > - use GPIO_ACTIVE_LOW for ps8640 gpios > > - move trackpad to hana > > --- > > arch/arm64/boot/dts/mediatek/Makefile | 3 + > > .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > > .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > > .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > > arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > > arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > > 6 files changed, 1161 insertions(+) > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi <snip> > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > new file mode 100644 > > index 000000000000..2ac738bebe04 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > @@ -0,0 +1,1040 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2016 MediaTek Inc. > > + */ > > + > > +#include <dt-bindings/input/input.h> > > +#include <dt-bindings/gpio/gpio.h> > > +#include "mt8173.dtsi" > > + > > +/ { > > + aliases { > > + serial0 = &uart0; > > + serial1 = &uart1; > > + serial2 = &uart2; > > + serial3 = &uart3; > > + }; > > I think this should be in mt8173.dtsi? > > > + > > + memory@40000000 { > > + device_type = "memory"; > > + reg = <0 0x40000000 0 0x80000000>; > > + }; > > + > > + backlight_lcd: backlight_lcd { > > nit: Not sure if you need to change or not, but this node is usually called > backlight: backlight without the _lcd. Note that this imply a userspace change > but /sys/class/backlight/backlight is more aligned with other boards (I guess) > when you have only one backlight. See for example: > > git grep backlight arch/arm64/boot/* > > > + compatible = "pwm-backlight"; > > + pwms = <&pwm0 0 1000000>; > > + brightness-levels = < > > + 0 16 32 48 64 80 96 112 > > + 128 144 160 176 192 208 224 240 > > + 255 > > + >; > > + default-brightness-level = <9>; > > The reason you see the display too dark is because userspace sets and remembers > the default value you have using the above configuration which is only 16 > levels. So after removing the two above properties you should set a new > brightness from userspace. > > AFAIK 16 levels is not enough to have fancy backlight effects on Chrome OS > userspace, at least is not enough for Rockchip devices so I suppose is the same > for Mediatek. > > You have to options here. > > A) Remove brightness-levels and default-brightness-level. This will end with a > non-linear brightness curve for the backlight up to 4095 levels. > > # cat max_brightness > 4095 > > B) Use the num-interpolated-steps and default-brightness-level properties. This > will end with a linear curve brightness. Similar to what is done for veyron > devices but in this case with more levels because the PWM to control the > backlight is 16-bits instead of 8-bits for veyron devices. > > * > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/rk3288-veyron-edp.dtsi#n42 > > My guess is that you're interested on option B here to be coherent with other > Chromebooks. You could evaluate either way. One of the reasons to chose the interpolated-steps for veyron was that some veyron panels require a minimum backlight level to work properly. This can be easily configured with the linear curve, but currently not with the non-linear one. Another reason was to keep the backlight curve of a released device unaltered, though I think that's not strictly required as long as the behavior with the non-linear curve is close/good enough. Chrome OS user space supports both types of curves, for a new device I would probably start with a non-linear curve, and only change that if the resulting behavior doesn't meet expectations for some reason. ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board @ 2020-01-13 18:18 ` Matthias Kaehlcke 0 siblings, 0 replies; 42+ messages in thread From: Matthias Kaehlcke @ 2020-01-13 18:18 UTC (permalink / raw) To: Enric Balletbo i Serra Cc: Mark Rutland, devicetree, Nicolas Boichat, linux-kernel, Daniel Kurtz, Doug Anderson, Rob Herring, linux-mediatek, Hsin-Yi Wang, Matthias Brugger, linux-arm-kernel Hi, On Mon, Jan 13, 2020 at 10:29:51AM +0100, Enric Balletbo i Serra wrote: > Hi Hsin-Yi, > > Apart from the maintainer comments, a few more comments ... > > cc'ing Matthias and Doug who I know played a bit with the pwm-backlight for the > uprev of the veyron devices, and you might be interested in his feedback in general. > > On 10/1/20 8:37, Hsin-Yi Wang wrote: > > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > > SoC. > > > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > > --- > > Changes in v2: > > - remove downstream nodes and unused nodes > > - use GPIO_ACTIVE_LOW for ps8640 gpios > > - move trackpad to hana > > --- > > arch/arm64/boot/dts/mediatek/Makefile | 3 + > > .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > > .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > > .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > > arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > > arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > > 6 files changed, 1161 insertions(+) > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi <snip> > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > new file mode 100644 > > index 000000000000..2ac738bebe04 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > @@ -0,0 +1,1040 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2016 MediaTek Inc. > > + */ > > + > > +#include <dt-bindings/input/input.h> > > +#include <dt-bindings/gpio/gpio.h> > > +#include "mt8173.dtsi" > > + > > +/ { > > + aliases { > > + serial0 = &uart0; > > + serial1 = &uart1; > > + serial2 = &uart2; > > + serial3 = &uart3; > > + }; > > I think this should be in mt8173.dtsi? > > > + > > + memory@40000000 { > > + device_type = "memory"; > > + reg = <0 0x40000000 0 0x80000000>; > > + }; > > + > > + backlight_lcd: backlight_lcd { > > nit: Not sure if you need to change or not, but this node is usually called > backlight: backlight without the _lcd. Note that this imply a userspace change > but /sys/class/backlight/backlight is more aligned with other boards (I guess) > when you have only one backlight. See for example: > > git grep backlight arch/arm64/boot/* > > > + compatible = "pwm-backlight"; > > + pwms = <&pwm0 0 1000000>; > > + brightness-levels = < > > + 0 16 32 48 64 80 96 112 > > + 128 144 160 176 192 208 224 240 > > + 255 > > + >; > > + default-brightness-level = <9>; > > The reason you see the display too dark is because userspace sets and remembers > the default value you have using the above configuration which is only 16 > levels. So after removing the two above properties you should set a new > brightness from userspace. > > AFAIK 16 levels is not enough to have fancy backlight effects on Chrome OS > userspace, at least is not enough for Rockchip devices so I suppose is the same > for Mediatek. > > You have to options here. > > A) Remove brightness-levels and default-brightness-level. This will end with a > non-linear brightness curve for the backlight up to 4095 levels. > > # cat max_brightness > 4095 > > B) Use the num-interpolated-steps and default-brightness-level properties. This > will end with a linear curve brightness. Similar to what is done for veyron > devices but in this case with more levels because the PWM to control the > backlight is 16-bits instead of 8-bits for veyron devices. > > * > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/rk3288-veyron-edp.dtsi#n42 > > My guess is that you're interested on option B here to be coherent with other > Chromebooks. You could evaluate either way. One of the reasons to chose the interpolated-steps for veyron was that some veyron panels require a minimum backlight level to work properly. This can be easily configured with the linear curve, but currently not with the non-linear one. Another reason was to keep the backlight curve of a released device unaltered, though I think that's not strictly required as long as the behavior with the non-linear curve is close/good enough. Chrome OS user space supports both types of curves, for a new device I would probably start with a non-linear curve, and only change that if the resulting behavior doesn't meet expectations for some reason. _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board @ 2020-01-13 18:18 ` Matthias Kaehlcke 0 siblings, 0 replies; 42+ messages in thread From: Matthias Kaehlcke @ 2020-01-13 18:18 UTC (permalink / raw) To: Enric Balletbo i Serra Cc: Mark Rutland, devicetree, Nicolas Boichat, linux-kernel, Doug Anderson, Rob Herring, linux-mediatek, Hsin-Yi Wang, Matthias Brugger, linux-arm-kernel Hi, On Mon, Jan 13, 2020 at 10:29:51AM +0100, Enric Balletbo i Serra wrote: > Hi Hsin-Yi, > > Apart from the maintainer comments, a few more comments ... > > cc'ing Matthias and Doug who I know played a bit with the pwm-backlight for the > uprev of the veyron devices, and you might be interested in his feedback in general. > > On 10/1/20 8:37, Hsin-Yi Wang wrote: > > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > > SoC. > > > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > > --- > > Changes in v2: > > - remove downstream nodes and unused nodes > > - use GPIO_ACTIVE_LOW for ps8640 gpios > > - move trackpad to hana > > --- > > arch/arm64/boot/dts/mediatek/Makefile | 3 + > > .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > > .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > > .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > > arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > > arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > > 6 files changed, 1161 insertions(+) > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi <snip> > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > new file mode 100644 > > index 000000000000..2ac738bebe04 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > @@ -0,0 +1,1040 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright 2016 MediaTek Inc. > > + */ > > + > > +#include <dt-bindings/input/input.h> > > +#include <dt-bindings/gpio/gpio.h> > > +#include "mt8173.dtsi" > > + > > +/ { > > + aliases { > > + serial0 = &uart0; > > + serial1 = &uart1; > > + serial2 = &uart2; > > + serial3 = &uart3; > > + }; > > I think this should be in mt8173.dtsi? > > > + > > + memory@40000000 { > > + device_type = "memory"; > > + reg = <0 0x40000000 0 0x80000000>; > > + }; > > + > > + backlight_lcd: backlight_lcd { > > nit: Not sure if you need to change or not, but this node is usually called > backlight: backlight without the _lcd. Note that this imply a userspace change > but /sys/class/backlight/backlight is more aligned with other boards (I guess) > when you have only one backlight. See for example: > > git grep backlight arch/arm64/boot/* > > > + compatible = "pwm-backlight"; > > + pwms = <&pwm0 0 1000000>; > > + brightness-levels = < > > + 0 16 32 48 64 80 96 112 > > + 128 144 160 176 192 208 224 240 > > + 255 > > + >; > > + default-brightness-level = <9>; > > The reason you see the display too dark is because userspace sets and remembers > the default value you have using the above configuration which is only 16 > levels. So after removing the two above properties you should set a new > brightness from userspace. > > AFAIK 16 levels is not enough to have fancy backlight effects on Chrome OS > userspace, at least is not enough for Rockchip devices so I suppose is the same > for Mediatek. > > You have to options here. > > A) Remove brightness-levels and default-brightness-level. This will end with a > non-linear brightness curve for the backlight up to 4095 levels. > > # cat max_brightness > 4095 > > B) Use the num-interpolated-steps and default-brightness-level properties. This > will end with a linear curve brightness. Similar to what is done for veyron > devices but in this case with more levels because the PWM to control the > backlight is 16-bits instead of 8-bits for veyron devices. > > * > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/rk3288-veyron-edp.dtsi#n42 > > My guess is that you're interested on option B here to be coherent with other > Chromebooks. You could evaluate either way. One of the reasons to chose the interpolated-steps for veyron was that some veyron panels require a minimum backlight level to work properly. This can be easily configured with the linear curve, but currently not with the non-linear one. Another reason was to keep the backlight curve of a released device unaltered, though I think that's not strictly required as long as the behavior with the non-linear curve is close/good enough. Chrome OS user space supports both types of curves, for a new device I would probably start with a non-linear curve, and only change that if the resulting behavior doesn't meet expectations for some reason. _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 42+ messages in thread
end of thread, other threads:[~2020-01-15 16:14 UTC | newest] Thread overview: 42+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-01-10 7:37 [PATCH v2 0/2] Add mt8173 elm and hana board Hsin-Yi Wang 2020-01-10 7:37 ` Hsin-Yi Wang 2020-01-10 7:37 ` Hsin-Yi Wang 2020-01-10 7:37 ` [PATCH v2 1/2] dt-bindings: arm64: dts: mediatek: Add mt8173 elm and hana Hsin-Yi Wang 2020-01-10 7:37 ` Hsin-Yi Wang 2020-01-10 7:37 ` Hsin-Yi Wang 2020-01-10 11:38 ` Enric Balletbo i Serra 2020-01-10 11:38 ` Enric Balletbo i Serra 2020-01-10 11:38 ` Enric Balletbo i Serra 2020-01-15 14:52 ` Rob Herring 2020-01-15 14:52 ` Rob Herring 2020-01-15 14:52 ` Rob Herring 2020-01-10 7:37 ` [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board Hsin-Yi Wang 2020-01-10 7:37 ` Hsin-Yi Wang 2020-01-10 7:37 ` Hsin-Yi Wang 2020-01-10 8:52 ` Yingjoe Chen 2020-01-10 8:52 ` Yingjoe Chen 2020-01-10 8:52 ` Yingjoe Chen 2020-01-10 13:42 ` Matthias Brugger 2020-01-10 13:42 ` Matthias Brugger 2020-01-10 13:42 ` Matthias Brugger 2020-01-13 18:01 ` Hsin-Yi Wang 2020-01-13 18:01 ` Hsin-Yi Wang 2020-01-13 18:01 ` Hsin-Yi Wang 2020-01-14 15:10 ` Matthias Brugger 2020-01-14 15:10 ` Matthias Brugger 2020-01-14 15:10 ` Matthias Brugger 2020-01-14 15:33 ` Hsin-Yi Wang 2020-01-14 15:33 ` Hsin-Yi Wang 2020-01-14 15:33 ` Hsin-Yi Wang 2020-01-15 8:53 ` Hsin-Yi Wang 2020-01-15 8:53 ` Hsin-Yi Wang 2020-01-15 8:53 ` Hsin-Yi Wang 2020-01-15 16:14 ` Matthias Brugger 2020-01-15 16:14 ` Matthias Brugger 2020-01-15 16:14 ` Matthias Brugger 2020-01-13 9:29 ` Enric Balletbo i Serra 2020-01-13 9:29 ` Enric Balletbo i Serra 2020-01-13 9:29 ` Enric Balletbo i Serra 2020-01-13 18:18 ` Matthias Kaehlcke 2020-01-13 18:18 ` Matthias Kaehlcke 2020-01-13 18:18 ` Matthias Kaehlcke
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.